Helper jobs in Shreveport, LouisianaCrear alertas

Job DescriptionQuick Lube Tech (Entry Level) – Automotive Why wait to make a career out of doing what you love? Some of our best master technicians started as quick lube techs. So if working on cars gets your gears moving, contact us today. As a quick lube tech, you’ll start by being responsible for inspecting and lubricating vehicles quickly and thoroughly. And with a little hard work and dedication, who knows where you’ll be able to go? At our dealership, the door is always open. And so are your options. Job Responsibilities • Perform multipoint inspections, • Communicate additional service/repair needs to service advisors, • Service universal joints, grease fittings, and steering knuckles using hand- or compressed-air powered grease guns, • Inspect fluid levels in steering gears, power steering reservoirs, transmissions, differentiasl, rear axle housings and shackles, • Check tire pressure, • Lubricate moving parts with specified lubricants, • Drain oil from crankcase and refill with required amount of oil, • Add water to radiator and battery, • Replace oil and air filters, • Inspect all vehicles for additional repairs, • Adhere to all company policies, procedures, safety standards and codes of conduct Compensation is based on experience and commensurate with Fortune 500 companies. Qualifications • Must meet dealership’s requirements for employment, • Ability to read/comprehend written instructions and information, • Familiarity with all aspects of automotive repair/maintenance, • Must have a valid driver license and be able to operate manual transmissions, • Prior experience as a technician’s helper or apprentice preferred, • Occasional exposure to inclement weather, • Ability to operate an automobile, • Prolonged periods of standing, stooping and bending, • Exerting 20 to 50 pounds of force occasionally, and/or 10 to 25 pounds of force frequently, and/or greater than 10 pounds of force constantly to move objects, • Requires a significant amount of walking and/or standing. May also require working in the seated position for long periods while operating controls with arms and legs. This position may also require working at a production pace while pushing and/or pulling materials from place to place.

Job Description Quick Lube Technician (Entry Level) – Automotive Why wait to make a career out of doing what you love? Some of our best master technicians started as quick lube techs. So if working on cars gets your gears moving, contact us today. As a quick lube tech, you’ll start by being responsible for inspecting and lubricating vehicles quickly and thoroughly. And with a little hard work and dedication, who knows where you’ll be able to go? At our dealership, the door is always open. And so are your options. Job Responsibilities • Perform multipoint inspections, • Communicate additional service/repair needs to service advisors, • Service universal joints, grease fittings, and steering knuckles using hand- or compressed-air powered grease guns, • Inspect fluid levels in steering gears, power steering reservoirs, transmissions, differentials, rear axle housings and shackles, • Check tire pressure, • Lubricate moving parts with specified lubricants, • Drain oil from crankcase and refill with required amount of oil, • Add water to radiator and battery, • Replace oil and air filters, • Inspect all vehicles for additional repairs, • Adhere to all company policies, procedures, safety standards and codes of conduct Compensation is based on experience and commensurate with Fortune 500 companies. Qualifications • Must meet dealership’s requirements for employment, • Ability to read/comprehend written instructions and information, • Familiarity with all aspects of automotive repair/maintenance, • Must have a valid driver license and be able to operate manual transmissions, • Prior experience as a technician’s helper or apprentice preferred, • Occasional exposure to inclement weather, • Ability to operate an automobile, • Prolonged periods of standing, stooping and bending, • Exerting 20 to 50 pounds of force occasionally, and/or 10 to 25 pounds of force frequently, and/or greater than 10 pounds of force constantly to move objects, • Medical, • Dental, • Vision, • 401(k), • Basic Life Insurance, • Accident & Critical Illness Insurance, • Paid Training, • Short Term Disability Family Car Group is a reputable, well-established, family-owned, and operated auto dealership group with a strong presence in our community. Our dealerships are dedicated to providing an amazing car-buying experience and provide a large selection of high-quality vehicles. Our goal is to dramatically enhance the car buying and servicing experience for our customers by building relationships based on mutual respect and complete transparency. Family Car Group is interested in finding talented individuals who are looking for a rewarding and challenging career in the automotive industry. We offer an excellent benefit package and a great working environment with many different employment opportunities ranging from sales to service to management. If you want to set yourself apart from the ordinary routine of the average job, possess the unique ability to consistently provide outstanding customer service, and have a dedication to excellence. Apply today!

Job Description Quick Lube Technician (Entry Level) – Automotive Why wait to make a career out of doing what you love? Some of our best master technicians started as quick lube techs. So if working on cars gets your gears moving, contact us today. As a quick lube tech, you’ll start by being responsible for inspecting and lubricating vehicles quickly and thoroughly. And with a little hard work and dedication, who knows where you’ll be able to go? At our dealership, the door is always open. And so are your options. Job Responsibilities • Perform multipoint inspections, • Communicate additional service/repair needs to service advisors, • Service universal joints, grease fittings, and steering knuckles using hand- or compressed-air powered grease guns, • Inspect fluid levels in steering gears, power steering reservoirs, transmissions, differentials, rear axle housings and shackles, • Check tire pressure, • Lubricate moving parts with specified lubricants, • Drain oil from crankcase and refill with required amount of oil, • Add water to radiator and battery, • Replace oil and air filters, • Inspect all vehicles for additional repairs, • Adhere to all company policies, procedures, safety standards and codes of conduct Compensation is based on experience and commensurate with Fortune 500 companies. Qualifications • Must meet dealership’s requirements for employment, • Ability to read/comprehend written instructions and information, • Familiarity with all aspects of automotive repair/maintenance, • Must have a valid driver license and be able to operate manual transmissions, • Prior experience as a technician’s helper or apprentice preferred, • Occasional exposure to inclement weather, • Ability to operate an automobile, • Prolonged periods of standing, stooping and bending, • Exerting 20 to 50 pounds of force occasionally, and/or 10 to 25 pounds of force frequently, and/or greater than 10 pounds of force constantly to move objects, • Medical, • Dental, • Vision, • 401(k), • Basic Life Insurance, • Accident & Critical Illness Insurance, • Paid Training, • Short Term Disability Family Car Group is a reputable, well-established, family-owned, and operated auto dealership group with a strong presence in our community. Our dealerships are dedicated to providing an amazing car-buying experience and provide a large selection of high-quality vehicles. Our goal is to dramatically enhance the car buying and servicing experience for our customers by building relationships based on mutual respect and complete transparency. Family Car Group is interested in finding talented individuals who are looking for a rewarding and challenging career in the automotive industry. We offer an excellent benefit package and a great working environment with many different employment opportunities ranging from sales to service to management. If you want to set yourself apart from the ordinary routine of the average job, possess the unique ability to consistently provide outstanding customer service, and have a dedication to excellence. Apply today!

Job Description Are you a hardworking individual looking for an opportunity to contribute to the improvement and maintenance of our highways? We are currently seeking dedicated Crane Operators, Carpenters, Finishers, Laborers, and Piledrivermen to join our team and make a positive impact on our transportation infrastructure. At Primoris; we take pride in our commitment to ensuring safe and efficient roadways for the community. As a valued employee, you will play a vital role in various construction and maintenance projects, working alongside a team of skilled professionals. If you are motivated, reliable, and eager to contribute to the enhancement of our highways, we would love to hear from you. Join our team of dedicated professionals and help us build a better transportation network for our community. Crane Operators Job Description: Daily operation of a lattice boom crawler crane on land and barge to drive pilings for retaining walls, bulkheads, and foundations of structures such as bridges, and piers. Operators should be capable of operating hand and foot levers of hoisting equipment to position piling leads, hoist piling into leads, and position hammers over pilings. Operators should be familiar with various pile materials including but not limited to: Concrete Pile, Steel H Pile, Pipe Pile, Sheet Pile, and Timber Pile. Duties and Responsibilities: • Drive pilings for retaining walls, bulkheads, and foundations of structures, such as buildings, bridges, and piers., • Use pile driver head on machine to drive pilings., • Judge distance and position piling leads., • Host piling into leads., • Position hammers over pilings., • Activate power hammers., • Raise and lower hammer to drive piles., • Use multiple controls to operate equipment., • Oil and service machine as needed., • Select appropriate attachments., • Confer with building or project supervisor on job specifications., • One (1) to four (4) years of experience., • NCCCO Certification. Carpenters Job Description: Constructs, erects, installs, fabricates, dismantles, and repairs structures, formwork and fixtures of wood, metal forms and associated accessories. General Requirements: • Practice safety rules., • Follow verbal and written instructions., • Safe use of hand & power tools., • Report to and assist immediate supervisor., • Perform quality work as determined by project specifications., • Accountable for all tools and materials at the end of your shift., • Read blueprints and schematic drawings to determine work procedures., • Select type and size of related materials according to the job specifications., • Study blueprints, sketches, or building plans for information pertaining to type of material required such as lumber or fiberboard, and dimensions of structure or fixture to be fabricated., • Select specified type of lumber or other materials., • Prepare layouts including lines and grade., • Marks cutting and assembly lines on materials., • Shapes materials to prescribed measurements., • Constructs forms and chutes for pouring concrete., • Assembles cut and shaped materials and fastens them together., • Fabricate from work then load, haul, and carry it to the job site and install per drawings, sketches, or plans., • Place and finish concrete in formwork and set and align form panels., • One (1) to four (4) years of experience in specified skill (depending on mechanic level)., • Written pre-employment qualification test., • Post-offer drug/alcohol screen and physical evaluation., • New Hire Orientation Quiz., • Applicant/employee must not pose a direct threat to the health or safety of such individual or others in the workplace., • Job site safety requirements as required by the client (clean shaven, long sleeves, steel toe boots, etc.)., • Must comply with company’s drug and alcohol abuse policy., • Must be able to pass physical examination, pre-employment if necessary, and as required by the company., • Able to climb and maintain balance on ladders, scaffolding, stairways, etc., • Stoop, kneel, crouch, crawl, or work at elevated heights as well as in confined spaces (towers, vessels, excavations, etc.)., • Able to carry 50 lbs. of tool and/or materials. It is recommended to get assistance to lift items over 50 lbs. Check with your project supervisor or project safety director., • Must be able to stand or walk for long periods of time., • Must be able to work extended hours on your feet on uneven surfaces (dirt, concrete, asphalt, mud, gravel, etc.), • Must be clean shaven and able to work while wearing a respirator and other personal protective equipment, when required. Laborers Job Description: Perform a variety of manual duties, usually working in a utility capacity by transferring from one project to another or from one task to another, where demands require assistance of workmen with varied experience and ability to work without close supervision. General Requirements: • Practice safety rules., • Follow verbal and written instructions., • Safe use of hand & power tools., • Report to and assist immediate supervisor., • Perform quality work as determined by project specifications., • Accountable for all tools and materials at the end of your shift., • Measure distance from grade stakes, drive stakes, stretch tight line, and grade stacks from lumber for reuse., • Level earth to fine grade specifications with shovel to assist in pipe laying, preparing sub grades and other excavations., • Direct other laborers in dumping concrete into forms, • Erect shoring and braces and paints pipe joints with sealing compound, • Assist in setting pumps and setting well-points., • May assist heavy construction equipment operator in aligning and moving equipment such as cranes, power shovels and backhoes, verifying grades and signaling operators to adjust machines to conform to grade specifications., • Directs truck drivers and scraper operators to dumping positions to maintain grades as directed by Grading Foreman or Dumping Foreman., • Work in a concrete paving crew, adding to or removing concrete from in front of concrete finishing machines so that correct grade will be met., • Occasionally use small power tools, • May work as lead man in a labor crew., • Will usually exercise considerable independent judgement to plan work of a routine nature; accepts responsibility for several phases and expedites that work without having to be told or be explained the procedure for performing duties., • Some industrial/construction/ general labor experience., • Post-offer drug/alcohol screen and physical evaluation., • New Hire Orientation Quiz, • Applicant/employee must not pose a direct threat to the health or safety of such individual or others in the workplace., • Job site safety requirements as required by the client (clean shaven, long sleeves, steel toe boots, etc.)., • Must comply with company’s drug and alcohol abuse policy., • Must be able to pass physical examination, pre-employment if necessary, and as required by the company., • Able to climb and maintain balance on ladders, scaffolding, stairways, etc., • Stoop, kneel, crouch, crawl, or work at elevated heights as well as in confined spaces (towers, vessels, excavations, etc.)., • Able to carry 50 lbs. of tool and/or materials. It is recommended to get assistance to lift items over 50 lbs. Check with your project supervisor or project safety director., • Must be able to stand or walk for long periods of time., • Must be able to work extended hours on your feet on uneven surfaces (dirt, concrete, asphalt, mud, gravel, etc.), • Must be clean shaven and able to work while wearing a respirator and other personal protective equipment, when required. Piledriver/Riggers Job Description: The Pile Driver must be skilled in the assistance of deep foundation installation including, but not limited to timber piles, concrete piles, sheet piles, drill shafts, auger cast, etc. Must also be experienced in erecting, disassemble, and working with and around pile driving equipment. Must also have basic rigging knowledge and perform general construction duties. Duties & Resposibilities: • Must have a willingness to learn., • Erect and dismantle lattice boom cranes., • Obtain necessary tools and components and the lay out of work., • Interpret hand signals in order to direct cranes for pile driving activities., • Must be able to follow instructions, • Proficiency with hand and power tools., • Perform physical labor that require considerable use of your arms and legs and moving your whole body such as climbing, lifting, balancing, walking, stooping and handling of materials at construction sites., • Act as a team led and mentor to less experienced laborers., • Using safety gear and practicing safe work habits, per the company policy manual., • Ability to rig equipment and material to be set into place., • Ability to use tools and equipment necessary to complete the job task at hand., • Ability to use math/complete calculations., • Previous related experience required., • 2+ years of industrial field experience as a Pile Driver Helper preferred. Benefits: • Competitive compensation paid weekly, • Best-in-class; Medical, Dental, Vision, and LTD/STD, • 401(k) with company match, vested day-one, • Employee Stock Purchase Plan [ESPP], • Tuition Reimbursement, • Paid Time Off, Holiday Pay, and Community Service Paid Time Off, • Pet Coverage "For our Furry Friends", • Legal Assistance Coverage Primoris was formed in 2004 as the parent company and is traded on the NYSE under the symbol PRIM. We provide a wide range of construction, maintenance, and engineering services for power generation, oil and gas, chemical, pipeline, utilities and distribution, and civil infrastructure clients. Primoris is ranked in the top 1% of the prestigious Top 600 Specialty Contractors List by Engineering News-Record (ENR), having built projects throughout the U.S. and Canada. For additional information, please visit . Primoris Heavy Civil, supported by the bonding capacity and resources of Primoris, has expanded into an even larger role within the heavy civil, infrastructure rehabilitation and transportation industries. Heavy Civil provides highway, port, airfield, rail and marine (intermodal transportation) construction services to private commercial and industrial clients as well as governmental entities such as the Department of Transportation and the US Army Corps of Engineers. Heavy Civil is comprised of six operating units that include North Louisiana Operations, South Louisiana Operations, Texas Operations, HMA Paving Operations, Concrete Paving Operations, and the Infrastructure Rehabilitation Unit. Agency Statement: We are not accepting resumes from Third Party Recruiting Firms for this position. If you are an Agency or Search firm representative, contact the Primoris Talent Acquisition Manager directly for consideration. Primoris or its subsidiaries will not be responsible for any fees arising from the use of resumes and online response forms through this source. In addition, Primoris or its subsidiaries will not be responsible for any fees on unsolicited resumes that are submitted to any member of the Staffing or Operations team. Primoris has established an approved vendor program for this service and will only consider accepting submissions from those approved firms. For consideration in becoming an approved vendor, contact HR. #LI-LV1

Job DescriptionDescription: JOB SUMMARY: Cooks all food orders, in a quick, timely and accurate manner. ESSENTIAL JOB FUNCTIONS: • Prepares and produces menu items to standards in a quick and efficient manner., • Ability to prepare items such as but not limited to salads, appetizers, sandwiches, hot dogs, pizza, etc., • Prepares, cooks, and seasons all food., • Skilled in fry cook, broiler, and Garde Manager., • Controls food production in all work areas including proper cooking methods, proper cooking times and temperature., • Adheres to kitchen maintenance and sanitation programs., • Maintains assigned station and equipment in a clean and sanitary condition. Requirements: GENERAL REQUIREMENTS: • Six (6) months prior experience as a cook or cooks helper., • Previous working knowledge of point of sales system preferred., • Must be able to provide own tools., • Must be able to work any day of the week and any shift., • Must be able to get along with co-workers and work as a team., • Local health department sanitation certificate., • Must be able to read, write, speak and understand English. DEMANDS NECESSARY TO COMPLETE ESSENTIAL JOB FUNCTIONS: PHYSICAL & MENTAL: • Must be able to work inside a kitchen and on a fry line during most of shift., • Must be able to lift up to 100 pounds., • Must be able to push and pull carts weighing up to 300 pounds., • Must possess coordination and dexterity to use kitchen utensils, such as, knives, spatulas, food tongs, etc., • Must be able to bend, stoop, reach, crouch, kneel, push, and pull when rotating stock and cleaning work area., • Must be able to operate the following kitchen equipment: stoves, grills, fryers, broilers, and other utensils in preparing the food orders., • Must be able to respond to visual and aural cues., • Must present a well groomed appearance. WORK ENVIRONMENT: • Must be able to maneuver around all areas of the kitchen., • Must be able to tolerate areas with extreme hot and cold temperatures.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off, • Vision insurance Primary Responsibilities: • Responsible for assigned shop and field mechanical and electrical repair functions to ensure continuous production consistent with established standards, • Assist Field Supervisors with Rig-ups and equipment trouble shooting, • Tear down valves, pipe fittings, flanges, bushings, bonnets, Frac stacks, gate manifolds; rebuild valves, plugs, catchers, and sand knockouts; repair, test, grease and paint equipment to prepare for use, • Load and unload 18-wheeler trucks, flatbed trucks, and hot shot delivery trucks with valves, manifolds, and oilfield machinery, • Re-paint equipment and use hammer and punch to scribe serial number on tools and equipment for identification purposes., • Record repair work performed and condition of equipment, • Travel to job sites as needed and work as a field assistantSecondary Responsibilities:, • Participate in HSE Program, • Complete warehouse work, • General housekeeping and facility maintenance, • Equipment maintenance, • Rebuild manifolds, • Participate in tailgate safety meetingsEducation, Experience:, • High School Diploma/GED, • One year related experience and/or training in the fieldCertifications:, • NoneRequired Skills:, • Mastery of all skills of a Shop Hand, • Prior oilfield experience; construction and mechanical aptitude essential, • Language Skills Ability to read and comprehend simple oral and written instructions and effectively communicate/present information one-on-one or in small group situations, • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals, • Ability to define problems, collect data, establish facts, and draw valid conclusions, • Reasoning Skills Ability to apply common sense understanding to carry out detailed written or oral instructions

Responsible for assigned shop and field mechanical and electrical repair functions to ensure continuous production consistent with established standards.Assist Field Supervisors with Rig-ups and equipment trouble shooting.Tear down valves, pipe fittings, flanges, bushings, bonnets, Frac stacks, gate

Essential Duties & Responsibilities:.This involves analyzing requirements for field installation, scheduling and coordinating work with customers and other contractors, job preparation of required materials and tools, installing mounting hardware, process instrumentation and valves/chokes, wiring, j

Routes are performed alongside a team driver or a helper and building materials must be physically unloaded to complete the delivery. Our drivers operate a standard shift (clutch shift) tractor/trailer rig with 40 and 45 foot trailers to deliver building materials.

The Facility Maintenance Helper will assist in the facility maintenance of all U-Haul Moving Centers, Storage Centers and other U-Haul facilities within a geographical area.