Trabajos maintenance en Mobile, Alabama - Page 3Crear alertas

Job DescriptionFarm Bill Wildlife Biologist II (2 Positions) Alabama Locations: USDA-NRCS offices in Mobile, AL and Luverne, AL Application Deadline: October 26, 2025Anticipated Start Date: November 2025 Overview: In partnership with the USDA-Natural Resources Conservation Service (NRCS), the two Farm Bill Wildlife Biologists will coordinate and implement wildlife habitat-related conservation programs and provide technical assistance to private landowners within the Working Lands for Wildlife (WLFW) Northern Bobwhite, Grasslands and Savannas Framework. The positions will be headquartered in the USDA Service Centers in Mobile and Luverne, Alabama, and provide service to their surrounding counties. The incumbents will work in joint capacity with partner agencies to promote, coordinate, and implement conservation provisions of the Federal Farm Bill on private lands, with a primary focus on the Environmental Quality Incentive Program (EQIP) WLFW. Conservation delivery may also involve other relevant Farm Bill programs such as the Conservation Reserve Program (CRP), general EQIP, ACEP, WRE, and the Conservation Stewardship Program (CSP), as well as state and local habitat programs and initiatives. General duties will include all aspects of wildlife habitat planning, landowner technical assistance, contract coordination, conservation plan writing, site assessment/eligibility determination, practice certification, program promotion/outreach, and reporting. Job Duties: • Provide wildlife management guidance and technical assistance to private landowners., • Assist private landowners, government agencies, non-government organizations and other groups with the application of wildlife focused USDA NRCS Conservation Programs. Training provided jointly by NRCS and QF., • Complete conservation plans, job sheets, Wildlife Habitat Evaluation Guides (WHEG) and other required documentation for conservation programs requiring biological expertise., • Communicate program requirements, complete site visits to determine eligibility, and develop contract documents for applicants and participants of USDA-NRCS conservation programs and other local and state programs., • Review plans and specifications for feasibility for implementation under Farm Bill program contract rules, etc., • Lead surveys as part of the WLFW Outcomes Assessment Project including spring breeding bird surveys, vegetation surveys, and fall covey counts. Deploy automated recording units (ARU) on private lands and manage collected audio files., • Accelerate conservation program enrollment by conducting outreach such as workshops, field days, demonstration events, and habitat tours., • Provide on-site landowner technical assistance for conservation practice implementation., • Ability to communicate clearly and effectively with landowners and partner agency staff., • Ability to work independently and with diverse clientele. Must be a motivated self-starter with strong interpersonal skills., • Knowledge of, and/or practical experience with silviculture and prescribed fire as it relates to timber management and production in the Southeastern US., • Possess knowledge of wildlife habitat requirements and the various land management tools used in the development/maintenance of those habitats., • Knowledge of conservation and wildlife programs provided by federal (i.e., Farm Bill, US Fish and Wildlife Service), state, & local entities., • Excellent verbal and written communication skills., • Ability to learn and identify bird calls., • Ability to identify native shrubs, forbs, and grasses and invasive plant species., • Strong organizational skills, time management, and attention to detail., • Proficiency with ArcPro is highly desired., • Proficiency with ArcGIS, GPS, Microsoft Office Suite (Excel, Word, PowerPoint, Outlook, etc.), • Valid driver’s license required; use of personal vehicle required with a mileage reimbursement and vehicle stipend provided. Salary Range: $45,000 - $48,000 (commensurate with experience) with annual performance-based raises, plus benefits, including: • Health, vision, dental and more insurance coverage plans available., • 401(k) Retirement plan with an employer match of up to 5%., • Student Loan Assistance program of up to $200/month for eligible employees., • Phone stipend of $65/month, • Vehicle Stipend of up to $300/month for eligible employees., • Paid Time Off accrued at 15 days (120 hours) per year for new employees (increasing after 3 years)., • Bereavement/Family/Sick Leave of 6 days (48 hours) per year., • 13 Paid holidays. Questions about this position? Please contact John Mark Curtis, MS/AL State Coordinator at or 662-694-0041 Pheasants Forever, Inc and Quail Forever is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, status as a qualified individual with disability, or any other category that may be protected by law. Powered by JazzHR cbZFmiBCu1

Job Description Job description Q & A Cleaning Solutions has an opening for a Janitor. In this role the incumbent will, under limited supervision, perform tasks associated with this position, as well as other tasks as directed by management. We are looking for a general cleaner to take care of our facilities and carry out cleaning and maintenance duties on weekends. Commercial Cleaning restroom, operating equipment, completion of electronic paperwork. The goal is to keep our buildings in a clean and orderly condition. PART-TIME POSITION Morning 5am-7am Flexible days Afternoon 3-5pm Location - Near Airport Blvd Commercial Building - need Custodian Qualifications • A high school diploma or GED, • MUST pass background check, • A minimum of two years of commercial/industrial or sanitation janitorial experience or an equivalent combination of education and experience, • This includes customer needs assessment, meeting quality standards for services and evaluation of customer satisfaction., • Strong verbal communication skills, • Ability to handle cleaning equipment and machinery such as auto scrubber, • Physical Requirements: Work involves various physical requirements and working conditions Responsibilities • In this role the incumbent will, under limited supervision, perform tasks associated with this position, as well as other tasks as directed by management., • Cleaning, sterilizing and supplying restrooms, • Removing and disposing of trash, • Following procedures for the use of chemical cleaners and power equipment to prevent damage to floors and fixtures, • Operate floor machine/auto scrubber to clean floors, • Follow all health and safety regulations, • Complete daily reports via Smartphone, • Must be able to do screenshots and upload, • Attendance mandatory, • Submitting electronic paperwork via apps on Smartphone

Job DescriptionJob Summary: We are seeking a dependable and detail-oriented Property Cleaner to join our property maintenance team. The ideal candidate will take pride in their work and play a vital role in maintaining the cleanliness and presentation of rental units, commercial properties, and job sites managed by our company. This role requires efficiency, consistency, and the ability to work both independently and with a team. Responsibilities: • Clean and sanitize vacant units, including kitchens, bathrooms, living areas, and appliances, • Sweep, mop, vacuum, and polish floors, • Wipe down surfaces, walls, baseboards, and windows, • Remove trash and debris from properties, • Clean interior and exterior common areas as assigned, • Report any maintenance issues, damages, or safety hazards to management, • Ensure all cleaning supplies and equipment are used and stored properly, • Maintain a high standard of cleanliness and professionalism at all job sites, • Follow company safety policies and procedures Qualifications: • Prior cleaning experience preferred (residential or commercial), • Reliable transportation and valid driver’s license, • Ability to lift up to 25 lbs and perform physical tasks such as bending, standing, and moving for extended periods, • Excellent attention to detail and time management skills, • Ability to work flexible hours, including some weekends if needed, • Must be able to pass a background check

Job DescriptionHVAC & Refrigeration - Service Technician (Commercial)Mobile, AL MaintenX is a leader in providing comprehensive HVAC and refrigeration services to commercial properties, including office buildings, restaurants, retail centers, healthcare facilities, and hotels. We are looking for an experienced HVAC & Refrigeration Technician to join our team, focusing on the installation, repair, and maintenance of heating, ventilation, air conditioning, and commercial refrigeration systems.Job Summary:The HVAC & Refrigeration Technician will be responsible for installing, diagnosing, and repairing HVAC and refrigeration systems in commercial buildings. The role requires expertise in working with large, complex systems, such as rooftop units, commercial-grade refrigeration, chillers, and energy management systems. The technician will ensure systems operate efficiently and comply with safety standards, while also minimizing downtime and disruption to commercial operations.Key Responsibilities: • Install, maintain, and repair HVAC systems in commercial buildings, including rooftop units, split systems, air handlers and air distribution systems., • Install, maintain, and repair commercial refrigeration systems, including walk-in coolers, freezers, refrigerated display cases, and ice machines., • Perform diagnostic checks and troubleshooting on malfunctioning HVAC and refrigeration systems, identifying issues and providing timely repairs., • Inspect and test HVAC and refrigeration systems to ensure proper functioning, including electrical circuits, thermostats, compressors, fans, and condensers., • Perform preventive maintenance on HVAC and refrigeration equipment, including changing filters, cleaning coils, and checking refrigerant levels., • Read and interpret blueprints, technical diagrams, and work orders to ensure accurate installation and repair of HVAC and refrigeration systems., • Work with energy management systems (EMS) to optimize energy efficiency in commercial environments, ensuring compliance with energy-saving guidelines and standards., • Install, calibrate, and maintain control systems, including thermostats, sensors, and building automation systems for commercial properties., • Ensure compliance with local, state, and federal safety standards and building codes, including EPA regulations regarding refrigerant handling., • Respond to emergency repair calls for HVAC or refrigeration system failures in commercial buildings, minimizing downtime and ensuring quick resolutions., • Document all repairs and maintenance tasks performed, including parts used, systems serviced, and recommendations for future maintenance or upgrades., • Collaborate with building management and other trades to coordinate HVAC and refrigeration services during building renovations or system upgrades.Requirements:, • Experience: Minimum of 3-5 years of experience as an HVAC & Refrigeration Technician, specifically in commercial settings such as office buildings, retail spaces, restaurants, and hotels., • On Call Schedule: At least one week out of the month, • Licensing & Certifications:, • Valid HVAC technician license, as required by local regulations., • EPA Section 608 certification for handling refrigerants., • Additional certifications in areas such as energy management, building automation, or advanced HVAC systems are a plus., • Technical Skills:, • Strong knowledge of commercial HVAC systems, including rooftop units, chillers, boilers, and energy management systems., • Expertise in commercial refrigeration systems, including walk-in coolers, freezers, ice machines, and refrigerated cases., • Proficiency in using diagnostic tools, such as multimeters, pressure gauges, and refrigerant recovery equipment., • Ability to read and interpret blueprints, wiring diagrams, and technical specifications for HVAC and refrigeration systems., • Physical Requirements: Ability to lift heavy equipment (up to 50 lbs), work in tight spaces, and perform tasks on ladders or rooftops as required., • Driver’s License: Must have a valid driver’s license with a clean driving record for travel between job sites., • Availability: Must be available for on-call shifts and emergency repairs, including some nights or weekends.Preferred Qualifications:, • Experience working with energy-efficient systems and technologies, such as variable refrigerant flow (VRF) systems and smart thermostats., • Familiarity with building automation systems (BAS) and energy management software in commercial properties., • Strong communication skills to interact with building owners, property managers, and tenants., • OSHA 10 or 30 certification is a plus.Compensation:, • Compensation Base: $24-$35 hourly based on experience, • Overtime opportunities, • Comprehensive benefits package, including health insurance, retirement plan, paid time off, and opportunities for professional development and certification.

Job Description We are currently seeking a Pool Maintenance Technician! EXPERIENCE PREFERRED!!!!!! Qualifications: • Familiarity with maintenance tools and equipment, • Ability to handle physical workload, • Deadline and detail-oriented, • Must be able to swim!!!!

Job Description As a Server at De-Railed Diner, you will be the face of our restaurant, providing top-notch service to our guests. You will be responsible for taking orders, serving food and beverages, ensuring customer satisfaction, and contributing to a positive and welcoming atmosphere in the diner. This is a fast-paced, customer-oriented role where you will have the opportunity to work in a fun and supportive environment. Key Responsibilities: • Customer Service: Greet customers warmly and guide them through the dining experience. Take food and drink orders, answer questions about the menu, and make recommendations as needed., • Order Accuracy: Accurately input orders into the POS system, ensuring that all customer requests and dietary restrictions are noted and communicated to the kitchen staff., • Food & Beverage Service: Deliver food and beverages to customers in a timely and efficient manner. Ensure that food is served hot and beverages are refilled promptly., • Table Maintenance: Check in with guests throughout their meal to ensure they are satisfied and offer additional items or assistance as needed., • Cash Handling: Process payments using the POS system, handle cash and credit transactions, and provide accurate change or receipts., • Teamwork: Work closely with kitchen staff, fellow servers, and other team members to ensure smooth operations and quick service., • Cleanliness & Organization: Keep tables, chairs, and dining areas clean and organized. Ensure all supplies are stocked and restock as needed., • Upselling & Specials: Promote daily specials, menu items, and drinks to enhance the guest experience and increase sales., • Health & Safety Compliance: Follow food safety and sanitation procedures to maintain a clean and safe working environment. Requirements: • Previous experience in a server or customer service role is preferred but not required., • Friendly, outgoing, and energetic personality with strong communication skills., • Ability to multitask and work efficiently in a fast-paced environment., • Ability to stand and walk for extended periods of time and lift up to 25 lbs., • Strong attention to detail and ability to manage multiple tables at once., • Ability to work a flexible schedule, including evenings, weekends, and holidays., • Positive attitude, strong work ethic, and dedication to providing excellent customer service.

Floor Technician Come work for Diversified Maintenance, a leading company in the Facilities Services Industry since 1973. At Diversified Maintenance we believe that details matter, as do each of our employees and customers. Through our core values of loyalty, honesty, and integrity, we strive to create a culture of growth and opportunity for each individual we employ. Although we currently have operations in all 50 United States, Puerto Rico, Guam, and the Virgin Islands, Diversified Maintenance is projected to double in size in the next five years. Join a large growing company with a sense of pride in everything that we do. Summary The Floor Technician will scrub, shine, clean and repair carpeted and non-carpeted areas using appropriate equipment and chemicals. This job includes operating machinery and moving large furniture while following safety guidelines to prevent injury to themselves and others. • Part-time, • Monday through Friday, • 6 hours per day, • $12.00/hour, • Previous floor care experience required, • Must have valid driver's license Job Duties • Operates various types of equipment used for floor care maintenance such as automatic scrubbers, floor machines, wet/dry vacuums, burnishers, vacuums, sweepers, pressure wash equipment and carpet extractors., • Dust mops, cleans and burnishes floors; strips, refinishes, scrubs and/or recoats floors; machine scrubs floors according to floor maintenance schedules., • Prioritize and coordinate with other workers as needed to complete floor care work within the overall scope of multi-trade projects., • Provides daily preventive equipment maintenance on all equipment used., • May be required to adjust alignment of squeeze blade, replacement of squeeze blade, hose replacement, and clearing of clogged hoses. Tags equipment for major repairs, and advises supervisor., • Assists supervisor with inventory, ordering supplies and ensures the use of chemicals and equipment is consistent with established safety standards and practices., • Assists the supervisor in the training of new employees in proper floor care methods and procedures according to company policy., • Be willing to assist with general cleaning duties as needed by supervisor. Requirements Minimum of 1 year of floor technician experience or training required. High School Diploma or equivalent preferred. Reliable transportation to ensure consistent dependability required. Must be able to meet physical requirements of position. Must successfully pass a background check and drug screen in accordance to contractual obligation. Diversified Maintenance Systems, is an Equal Opportunity Employer. We consider qualified applicants for employment without regard to race, religion, color, national origin, ancestry, age, sex, gender, gender identity, gender expression, sexual orientation, genetic information, medical condition, disability, marital status, or protected veteran status.

Job DescriptionEstes Heating and Air Conditioning is looking to hire a detail-oriented HVAC technician to maintain and repair HVAC systems. The HVAC technician will be skilled in cleaning, adjusting and repairing systems. You will guide and advise the customer to select the most appropriate air quality system to fulfill their requirements. You will be responsible for performing maintenance, warranty and emergency repairs. You will have the opportunity to earn additional commission along with your hourly salary HVAC Technician Responsibilities: • The ability to sell a multitude of different products & services i.e.: new replacement systems appointments, duct & insulation systems, indoor air quality products, along with maintenance agreements, • Maintaining and repairing ventilation and air conditioning systems and equipment., • Identifying maintenance risks on equipment., • Diagnosing electrical and mechanical faults for HVAC systems., • Cleaning, adjusting and repairing systems, and performing warranty services., • Performing emergency repairs promptly and efficiently., • Providing technical direction and on-the-job training., • Keeping daily logs and records of all maintenance functions., • Ensuring compliance with appliance standards and with Occupational Health and Safety Act., • Complying with service standards, work instructions and customers' requirements., • Assisting with customers' queries.

Job Description Join InLine as an Underground Infrastructure Construction Foreman InLine seeks a highly skilled Underground Electric and Communications Construction Foreman to lead our teams in installing and maintaining underground utilities. This is an exciting opportunity to work with cutting-edge technology and infrastructure in the Intelligent Transportation Systems (ITS), communication networks, and roadway lighting sectors. If you have strong leadership skills, hands-on experience, and the ability to manage underground projects, we want to hear from you! Job Summary: As the Underground Electric and Communications Infrastructure Construction Foreman, you will be responsible for leading field operations on infrastructure projects involving underground installations. This role requires a working foreman who leads by example, actively working alongside the crew while coordinating tasks to ensure projects are completed safely, on time, and within specifications. Essential Duties and Responsibilities: • Lead and work alongside a team to install underground infrastructure., • Operate and oversee equipment such as bore rigs, trenchers, excavators, and plows to install underground infrastructure., • Read and interpret blueprints, electrical one-lines, and construction drawings to guide installation and ensure accuracy., • Coordinate with internal staff, clients, and subcontractors to meet deadlines and project specifications and report project challenges., • Complete daily field logs documenting labor, equipment, and materials used to maintain efficiency and control costs., • Enforce compliance with safety regulations., • Inspect work sites regularly to ensure equipment is well-maintained and safe working conditions are upheld., • Troubleshoot and resolve issues on-site Required Skills and Experience: • Proven experience installing underground infrastructure., • Strong leadership and hands-on experience in leading crews on infrastructure projects., • Ability to read and interpret blueprints and construction drawings., • Proficiency in operating bore rigs, trenchers, mini excavators, and plows., • Knowledge of safety regulations and procedures for underground work., • Valid Class A Commercial Driver’s License (CDL) is preferred., • Experience with traffic control setup/MOT., • Ability to work in all weather conditions and meet project deadlines. Schedule: • Full-time, Monday to Friday, with overtime as required. Benefits: • Competitive salary., • Comprehensive health, dental, and vision insurance., • 401K plan with company match., • Paid time off and holidays., • Opportunities for career advancement within the company. How to Apply: Apply online at or through the InLine Career Portal . Company’s Website: Join us at InLine and take your career to the next level by leading innovative underground electric and communications projects that shape the future of infrastructure. Company DescriptionJoin InLine: Leading the Future of Intelligent Transportation InLine, a trailblazer in Intelligent Transportation Systems and Communication Network Construction, seeks over 20 professionals to expand our dynamic team. With over 30 years of industry leadership, we offer exciting roles in ITS, Traffic Signals, EV Charging Stations, and Roadway Lighting. What We Offer: Collaborative environment with professional growth opportunities Innovative projects in construction and maintenance A forward-thinking company focused on sustainable, cutting-edge solutions Your Role: Contribute to the development of smart transport infrastructures, utilizing the latest technologies. Make a significant impact in enhancing how cities move and communicate. Apply Now: Embark on a career that propels you into the future. Be a part of a company that leads the industry change. Join InLine and move forward with us.Join InLine: Leading the Future of Intelligent Transportation\r\n\r\nInLine, a trailblazer in Intelligent Transportation Systems and Communication Network Construction, seeks over 20 professionals to expand our dynamic team. With over 30 years of industry leadership, we offer exciting roles in ITS, Traffic Signals, EV Charging Stations, and Roadway Lighting.\r\n\r\nWhat We Offer:\r\n\r\n Collaborative environment with professional growth opportunities\r\n Innovative projects in construction and maintenance\r\n A forward-thinking company focused on sustainable, cutting-edge solutions\r\n\r\nYour Role:\r\nContribute to the development of smart transport infrastructures, utilizing the latest technologies. Make a significant impact in enhancing how cities move and communicate.\r\n\r\nApply Now:\r\nEmbark on a career that propels you into the future. Be a part of a company that leads the industry change. Join InLine and move forward with us.

2405 Perimeter Rd Mobile, AL, 36615 What’s the Job? Ready to accelerate your career while helping our customers move forward? As a Technician at Penske, you’ll do exactly that. Here, you’ll do preventative maintenance and minor repairs on the newest and best maintained fleet of vehicles in the industry. You will help our customers keep their vehicles in shape and on the road. Whether you’re looking for your first job out of school or have some vehicle repair experience and are looking to switch gears, becoming a Penske Technician may be a great fit for you. Why is this job awesome? For starters, no day is the same. You’ll get to work on lots of different types of equipment—not just one manufacturer. We work hard to get the job done, but we also make sure you have the time you need to do the job right. Safety and reliability are our top priorities. Working alongside experienced supervisors and master technicians, we’ll teach you about our vehicle maintenance processes and the cutting-edge technology we use. And we will make sure you are getting the industry certified training you need to succeed and grow your career. You’ll learn from the best in the industry. We also take pride in how clean our facilities are, and we provide you with all the necessary major shop tools. If you are mechanically inclined or have completed any vehicle repair training, are willing to learn, and interested in a stable career with a lot of opportunity for growth, join our team. Main Responsibilities: • Making sure vehicles are maintained and safe for our customers • Using Penske’s tools and technologies to log, research and complete repairs, including basic vehicle diagnostics • Doing preventative maintenance repairs—like replacing or rotating tires—and completing vehicle component lubrication and replacement, some electrical system repairs, and cooling system maintenance on gas and diesel engine vehicles • Partnering with your manager to learn new skills using Penske’s technician training and hands-on coaching • Working on other projects and tasks as assigned by supervisor Why Penske is for You: • Competitive starting salary • Shift Premiums - 2nd ($2.00/hr) 3rd ($3.00/hr) Weekends ($2.00/hr) • Career stability • Opportunity for growth • Excellent benefits, including lots of time off • Strong, well-rounded training on a variety of OEM equipment (Penske’s Technician Certification Program is certified as a Continuing Automotive Service Education provider) • Advanced vehicle maintenance technology • Location and schedule flexibility Qualifications: • High school diploma or equivalent preferred; vocational or technical certification in vehicle repair preferred • Basic mechanical aptitude and 1-2 years of automotive or diesel repair experience (preferred) • Valid driver’s license • The ability to solve problems and comfort using tools • Excellent customer service skills and communication skills • The ability to work well as part of a team and outside • Basic computer skills • The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management • The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice. • Regular, predictable, full attendance is an essential function of the job • As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review. • Willingness to work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education), the ability to pass a drug screen and physical as required by the Department of Transportation, and potential travel within a near geography for training are required This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period. • The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls. • The associate must be able to work safely at heights using applicable ladders and elevated working platforms. • The associate must be able to safely work in all weather conditions. • Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment. • The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. Penske is an Equal Opportunity Employer About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success. Visit Go Penske to learn more. Job Category: Vehicle Maintenance/Mechanics/Technicians Job Function: Truck Maintenance Job Family: Vehicle Maintenance Address: 2405 Perimeter Rd Primary Location: US-AL-Mobile Employer: Penske Truck Leasing Co., L.P. Req ID: 2509989

The Maintenance Department facilitates uninterrupted production at Rate of high-quality bags through timely preventive and reactive plant-wide maintenance of equipment and infrastructure. Education and Experience • GED or HS Diploma, • 3 or more years experience, • Maintain industrial equipment and infrastructure., • Journeymen license, • Welding Certifications, • Fully aware of machinery hazards, • Passes A/M reading & math testing., • Expresses ideas freely and speaks clearly., • Safety awareness, • Self-Directed, • Action Oriented, • Dependable, • Team player, • Adaptable, • Attention to Detail Maintenance Manager Duties • Lubricates and oils machines, • Inspects machines for proper lubrication – ensures all grease fittings are in-place and oilers are functioning, • Works with other Maintenance personnel to perform scheduled Preventive Maintenance tasks, • Maintains specified Shop equipment, • Maintains work area, • Participates in Continuous Improvement team efforts, • Must have Welding/Fabrication Skills, • Strong mechanical aptitude, • Reads, understands and follows all rules, regulations and work instructions, • Arrives at the workplace before the shift begins, day in and day out, • Works on a rotating shift schedule (morning / evening / night), • Works scheduled overtime (weekdays and/or weekends), • Lifts up to 60 lbs. repeatedly, • Communicates and cooperates with others as a team member ProAmpac provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other classification protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees are treated during employment without regard to any of these characteristics. Discrimination of any type will not be tolerated. Job Type: Full-time Pay: $18.71 - $30.00 per hour Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Employee discount, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Parental leave, • Referral program, • Retirement plan, • Tuition reimbursement, • Vision insurance Experience level: • 3 years Schedule: • 10 hour shift, • 12 hour shift, • 8 hour shift, • Extended hours, • Night shift, • Overnight shift, • Overtime, • Rotating shift, • Weekends as needed Work setting: • In-person Ability to Relocate: • Mobile, AL 36615: Relocate before starting work (Required) Work Location: In person Education Preferred

Essential Duties and Tasks To perform this job successfully, an individual must be able to perform each essential job function satisfactorily. Reasonable accommodations may be made, upon request, to enable individuals with disabilities to perform the essential functions. · Coordinate or assist with the activities of team members. · Comply with all Safety, Operational and Employment policies and practices. · Ensure team is following protocols pertaining to safety, quality, production, documentation, reports, good manufacturing practices, 5S compliance and cleaning procedures. · Seek out opportunities to improve established manufacturing practices and become a sounding board for employee concerns. Anticipate inefficiencies and bring constructive solutions · Support an environment of Honesty, Candidness, Transparency, Teamwork, Accountability. · Support activities including analysis of departmental costs, investigation of significant variances, corrective actions and communication to teams of actions taken. · Train and mentor employees · Understand machine requirements for effective and efficient operations. · Understand defects to assist in rectifying issues. · All other duties as assigned. Qualifications, Education and Experience · Associates degree preferred · 2 - 4 years manufacturing experience on same or similar equipment. · Experience with Lean Six Sigma, ASQ, Quality ISO/SQF, Continuous Improvement a plus. · Ability to manage moderately complex issues and problems. · Experience with cross-functional teams. · Solid working knowledge of maintenance processes and related manufacturing. · Experience using Microsoft Office Suite (Word, Excel, Power Point) and Outlook. · Maintains strict confidentiality and protects privacy of confidential/sensitive information. · Exceptional time management and organization skills. · Ability to communicate effectively (verbal, written, and presentations). · Proactive; exercises sound judgment and decision making; able to identify problems and needs and develop solutions and/or options. · Self-confident, self-motivated polished professional who thrives in a challenging, fast-paced environment. Key Competencies Ethical Conduct Problem Solving/ Analysis Technical Capacity Communication Proficiency Independent Worker Metric-Driven Detail Oriented Leadership Skills Work Environment This role operates in a manufacturing environment. Safety equipment including hearing protection, eye protection, foot protection and other PPE may be required in manufacturing areas. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Employee is regularly required to stand; walk; use hands/fingers to type, hold, handle, or feel; and reach with hands and arms. The employee is regularly required to talk or hear. The employee must occasionally lift and/or move up to 50 pounds. Other Duties Always take ownership, be accountable for your actions, your job and your team. This job description is a tool for you. Other job duties/projects may be assigned to you to meet business needs, this outline is not to be considered a detailed description. Good and reliable attendance, positive attitude and at or above job specific metrics and/or goals will reflect on your annual review. EEO Statement ProAmpac provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other classification protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed, and employees are treated during employment without regard to any of these characteristics. Discrimination of any type will not be tolerated. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

Job Description Seeking a Physical Therapist to cover therapy services virtually in Alabama: We are an outpatient therapy clinic seeking passionate therapists to deliver top-notch therapy and results for our geriatric clientele. We believe that once you take a proactive preventative approach, our patients thrive and experience a more successful aging-in-place. If you believe in the power of geriatric therapy and the dignity that it can provide to those who have given so much to this world over the years, then you are exactly who we invite to join our wonderful, diverse, professional team of therapy experts! We believe in full transparency with our therapy team, including detailed payment reports for you to understand exactly what you were paid on, and we encourage use and collaboration of your clinical judgement. You are free to make your own schedule, agree or disagree to patient assignment.... Did we mention competitive compensation? Visit our website at Responsibilities include but are not limited to: • Conduct comprehensive virtual evaluations to understand the specific needs of each patient, • Manages patient caseload safely and effectively to deliver optimal outcomes, • Remotely monitor patient progress, making necessary adjustments to the treatment plan as required, • Collaborate with other care team members to ensure a holistic approach to patient care, • Keep up-to-date with the latest in rehabilitation and physical therapy best practices, • Must be able to work under pressure and meet deadlines, while maintaining a positive attitude and providing exemplary customer service to our patients, • Ability to work independently and carry out assignments to completion within parameters of given instruction, • Remain highly adaptable to taking on new workflows or processes, approach challenges with critical thinking and creative problem-solving within a fast-paced growing environment, • Thrive off a flexible schedule, • As a virtual tele-health company, you must be able to deliver patient care services in a private, professional space with reliable, strong internet connection and be located within Florida, • Communicates with families, physicians, and other health care professions, • Graduate of an accredited college or university with a Doctoral/Masters/Bachelors degree in Physical Therapy,, • Education and/or Experience: Experienced Therapists preferred, • Actively Licensed as a Florida Physical Therapist., • Comfortable with using technology and virtual platforms for delivering care, • Excellent interpersonal and communication skills, • Ability to exercise sound clinical judgment and practice within the scope of physical therapy practice, • A genuine passion for improving the lives of seniors Job Type: Permanent ***A PRN therapist is part of an on-call pool of therapists who work on a per diem basis. PRN is short for the Latin term "pro re nata," which means "as needed." As a PRN therapist, a therapy organization will send patient assignments for the therapist to follow the POC when they need an extra therapist to treat their patient load. If you are looking for full-time work as a PRN therapist, it is recommended to sign up with several different companies to keep your schedule busy, as some companies may be busier than others in your area. PRN work comes with its own set of considerations, such as hours being reduced during slow periods; but overall, it offers unparalleled flexibility and unique opportunities for growth! Ultimately, PRN work can be an excellent choice for those seeking autonomy and diverse experiences in their profession. Here are the key aspects of a PRN therapist role: • Flexible Schedule: PRN therapists have the freedom to choose when they work. They can accept or decline cases based on their availability. This flexibility is especially beneficial for those with other responsibilities or jobs/commitments., • Variety of Settings: PRN therapists at Sobe Rehab work in ALF and residential home settings. The diversity of environments allows therapists to gain experience across different patient populations., • Higher Rates: While PRN positions lack benefits like paid time off and health insurance, they often offer higher rate of pay. Employers compensate for the absence of benefits by providing a more attractive wage., • No Long-Term Contracts: PRN work can vary from just a few patient assignments to several, depending on the demand in your area. Therapists can take assignments without being tied to a specific facility for an extended period., • Weekend and Holiday Shifts: PRN therapists may be called upon to cover weekend shifts or holidays, along with regular weekday shifts. These shifts often come with premium pay rates. Working weekends can also provide a quieter environment for focused patient care., • Skill Maintenance: PRN work keeps therapists engaged and sharpens their clinical skills. Exposure to different patient cases and treatment approaches enhances professional growth., • Networking Opportunities: Interacting with various colleagues, physicians, and patients allows PRN therapists to expand their professional network. Networking can lead to future job opportunities and collaborations. Compensation: $80/30 minute/evaluation

Job DescriptionDescription: CENTEGIX® is the industry leader in wearable safety technology for healthcare, education, government, and commercial workplaces with nearly 700,000 badges in use. The cloud-based CENTEGIX Safety Platform™ initiates the fastest response time for emergencies, from the everyday to the extreme. Leaders in nearly 15,000 locations nationwide trust CENTEGIX’s innovative safety solutions to empower and protect people every day. Purpose: We are looking for a Field Operations Engineer to be the trusted face of our company, and to help our customers get the most out of our safety platform. This is a great opportunity for you to be the hero, who makes schools, hospitals and local government offices safer. If you are a problem-solver, who enjoys working with people, and likes the idea of building a network of leaders from our customer-base, this is a great opportunity for you. This role will allow you to work directly with IT and Operations leaders, building trust as you help them with our technology. A day in the life of a Field Operations Engineer is never boring. You'll be doing everything from installing our new technology to troubleshooting and resolving issues on-site. We'll give you all the tools and training you need, but what we really want is your commitment to our customers and your ability to build trust with people. If you are a great communicator with a strong technical aptitude, you will thrive in this role. You will have the chance to learn new technology, make a real impact on customer safety, and grow your career with a team that values your contributions. Position Responsibilities: • Engage Operations, IT, and Facilities leaders at customer sites to resolve platform issues that arise from time-to-time, • Serve as a customer-facing representative of CENTEGIX, ensuring confidence and trust in our solutions., • Effectively engage with customers, ensuring clear communication and exceptional service. Build and maintain strong relationships to enhance customer satisfaction and operational success., • Develop a deep understanding of our products and services to communicate their value effectively. Confidently answer customer questions, provide solutions, and represent the company with knowledge and professionalism., • Ensure company assets are recovered from installers and returned in a timely manner., • Provide Partner training and management as needed to ensure the installer base is up to date on product development and capable of supporting the customer base, • Partner with the Customer Success and Command Center teams to coordinate adjustments and provide a seamless support experience to the customer between remote and onsite activities, • Capture and provide feedback about the CrisisAlert and ContactAlert platforms to the product development and product management teams, emphasizing reliability and enhancing the user experience, • Utilize internal Centegix systems to manage customer related activities. Leverage systems to provide timely updates to internal customers in Customer Onboarding, Customer Success, and Command Center teams, • Leverage the Installer Application to make changes to the CrisisAlert and ContactAlert platforms, • Assist with change, add or routine maintenance questions and orders, • Support training opportunities with customers to drive usage and adoption of CENTEGIX platforms and services, building confidence in platform use and long-term value, • Engage administrators and end users, where possible, to generate feedback on the platform and verbatim to leverage in marketing activities.Requirements:

Job DescriptionDescription: About the Company: We provide specialized subcontracting and technical assistance services to support clients in the transport and aerospace industries. We work closely with clients to ensure that our solutions meet their needs and exceed their expectations. Our team members are motivated individuals that do remarkable things every day! Position Summary: AAA United States, Inc. has partnered with a company in Columbus, Mississippi that is an international pioneer in the aerospace industry. They are a leader in designing, manufacturing and delivering aerospace products, services and solutions to customers on a global scale. A commercial aircraft manufacturer, with Space and Defense as well as Helicopters Divisions, they are the largest aeronautics and space company in Europe and a worldwide leader. We are looking for an Automatic Drilling Technician who is seeking their next opportunity in a complex and ever-changing work environment! Job Description: • Responsible for providing maintenance, repair and overhaul support on the ADU equipment at both the ADU shop and/or on the production line., • Setup, Repair and implement Automatic Drilling Units, Fixtures and Templates in collaboration with production needs., • Oversee the qualification of ADUs and support their entry into service at the supplier site, • Responsible for the adjustment of ADUs, cutting tools and drilling templates., • Responsible for the ongoing maintenance and repair of ADUs, • Provide oversight and limited instruction to employees using equipment for the first time(s), • Must be able to demonstrate extensive knowledge of the type of mechanical work performed in the FAL ADU Shop, • Maintains a high level of skills and is generally perceived as an authority regarding ADU maintenance and adjustmentRequirements:, • 3+ years’ experience in mechanical component maintenance, repair and overhaul shop environment., • Experience on maintenance, repair and overhaul of pneumatic/hydraulic components e.g. automotive transmission overhaul, pneumatic valves and component overhaul is preferred., • Preferred 5+ years minimum experience in with hands-on experience in the maintenance of ADU's, drilling templates, cutting tools and test equipment, • Ability to communicate optimally, both verbally and in written form., • Proficiency in written and spoken English.

Job Description Overview The Casing Driller (Deep Foundation and Tie Back Driller) is an essential member of the frontline team and will be responsible for drilling holes, monitoring their condition, and leading crews in the operation and care of drilling equipment. As a Driller, you will play a crucial role in achieving company goals, ensuring respect for company property, and maintaining a high standard of reliability, punctuality, and work ethic. This position requires working outdoors year-round—sometimes in extreme conditions—and strenuous physical labor. Who is GeoStabilization International®? GeoStabilization International® (GSI) develops and installs innovative solutions that protect people and infrastructure from the dangers of geohazards. We specialize in emergency landslide repairs, rockfall mitigation, and grouting using cutting edge design/build and design/build/warranty contracting. GeoStabilization International is the leading geohazard mitigation and bridge rehabilitation firm operating throughout the United States, Canada, and Australia. Our expertise, proprietary tools, and worldwide partnerships allow us to repair virtually any slope stability or foundation problem in any geologic setting. Responsibilities • Responsible for essential maintenance tasks, including greasing, to ensure optimal functionality of drilling equipment., • Demonstrate strong communication skills to facilitate effective collaboration within the team and communicate maintenance requirements., • Utilize extensive knowledge of drill upkeep and preventive maintenance procedures to enhance equipment longevity and ensure equipment cleanliness., • Ability to fill out precise drill logs and maintain accurate as-builts for comprehensive project documentation., • Maintain regular communication and interaction with Superintendents to provide updates and address any concerns., • Ability to work in loud environments and maintain all required safety PPE. Qualifications Basic Qualifications: • 3-5 years of geotechnical experience, • Valid Driver’s License, • Ability to hit daily production targets, • Ability to read and interpret blueprints, • Ability to travel extensively as required - up to three weeks on duty at a time, • Proficiency in welding, • Ability to lift up to 50lbs and engage in strenuous physical labor, • Possess vast knowledge of different types of tooling and drilling techniques, • Ability to obtain DOT Medical Card Preferred Qualifications: • Valid CDL is preferred The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. • Climates vary in degrees, in tropical to desert environments., • The noise level in the work environment is moderate and hearing protection is often required., • Exposure to characteristic construction site dangers. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Travel: 100% travelling in the Eastern US. Employees are expected to work a 3 weeks on, 1 week off schedule. GeoStabilization International, LLC. is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Job DescriptionJob Summary: The Apartment Painter is responsible for preparing surfaces and applying paint, stains, and other finishes to the interior and sometimes exterior of apartment units and common areas. This role requires a keen eye for detail, efficiency, and adherence to safety protocols to ensure high-quality results that meet property standards and prepare units for new residents. Key Responsibilities: • Surface Preparation:, • Inspect surfaces (walls, ceilings, trim, doors, cabinets) to determine the necessary preparation., • Clean surfaces thoroughly, removing dirt, grease, and debris., • Scrape, sand, and wire brush to remove loose, peeling, or old paint., • Fill cracks, holes, and imperfections with spackle, plaster, or putty., • Apply caulk to seams, corners, and around fixtures., • Tape off areas not to be painted (trim, windows, light fixtures, outlets)., • Lay down drop cloths and protective coverings to shield floors, furniture, and other surfaces from paint., • Apply primers or sealers as needed to ensure proper adhesion and a smooth finish., • Paint Application:, • Mix paints and other materials to achieve the desired color, texture, and consistency, often matching existing colors., • Apply paint, varnish, stain, and other finishes using a variety of tools, including brushes, rollers, and sprayers., • Ensure even coverage and a high-quality finish, paying close attention to detail in edging and cutting in., • May apply specialty finishes, such as faux finishes or textured coatings, if required., • Maintenance and Repair:, • Perform minor drywall repairs as needed (e.g., patching holes)., • Conduct touch-ups and repainting to address wear and tear or damage., • Safety and Cleanliness:, • Adhere to all health and safety regulations and protocols, including proper handling and disposal of paints, solvents, and chemicals., • Utilize personal protective equipment (PPE) as required., • Maintain a clean, organized, and safe work area, including proper storage of materials and tools., • Clean and maintain painting tools and equipment (brushes, rollers, sprayers) after use., • Remove all debris and materials from the job site upon completion., • Collaboration and Communication:, • Communicate effectively with property management, maintenance staff, and other team members regarding project status, timelines, and any issues., • Coordinate work schedules to ensure timely completion, especially during apartment turnovers.Qualifications and Skills:, • Education: High school diploma or GED preferred., • Experience: Proven experience as a painter, preferably in a residential or apartment setting., • Technical Skills:, • Proficiency in using various painting tools and equipment (brushes, rollers, sprayers, scaffolding, ladders)., • Knowledge of different paint types, finishes, and their applications., • Understanding of color theory and paint mixing principles., • Ability to perform basic mathematical calculations for estimating paint quantities., • Physical Demands:, • Ability to stand, walk, bend, kneel, reach, and climb ladders for extended periods., • Ability to lift and move heavy items (e.g., paint cans, equipment)., • Good balance and manual dexterity., • Comfortable working at heights and in confined spaces., • Soft Skills:, • Excellent attention to detail and precision., • Strong work ethic and reliability., • Ability to work independently and as part of a team., • Good time management and organizational skills to meet deadlines., • Effective communication skills., • Positive attitude.Working Conditions:, • Work typically takes place indoors, but may occasionally involve exterior painting., • May be exposed to paint fumes, dust, and varying temperatures. Kb7gwdpR4X

Job Description Position Summary: Quality Inspectors will be responsible to the Chief Inspector/Head of Quality for the performance of all Quality Control Inspections. Primary Responsibilities: • Review incoming aircraft maintenance flight logs for items of work required to be accomplished at the Repair Station., • Perform primary inspections on the aircraft., • Procure required forms and work orders, and transfer work to be accomplished to forms., • Be responsible for the surveillance of all work in progress., • Accept or reject work accomplished on all items generated by the work order., • Conduct/perform internal audits as requested., • Be responsible for the entries in the aircraft maintenance flight logs, as well as the airworthiness release. Inspection methods:, • Check for proper installation, security, safety, and workmanship., • Pressure checks if necessary. • Check for proper material and fasteners., • Check for conformance to specifications per repair, maintenance or other relevant manual or applicable engineering instructions approved by FAA., • Perform internal and external audits., • Perform receiving inspection duties., • Inspection shall be accomplished as required during progress of work and at completion prior to release of aircraft on all items written., • Assist with the development of processes and procedures., • Coordinate between various departments to schedule work flow based on available resources. Qualified Experience/Skills/Training: • Maintain neat and clean work environment., • Ability to follow documented procedures and standards, • Clear communication both oral and written required., • Proficient in MS Office Suite, • May be required occasional domestic travel, • Able to make independent decisions with little or no supervision., • Must be able to interact cordially and productively with subordinates, co-workers and supervisors., • Observe safety procedures., • Regular attendance required as outlined in company policy., • Must understand, read and write proficiently in the English language to read and understand appropriate manuals, and technical information necessary to adequately perform duties., • Must be able to see clearly, within 20/20 vision, with or without corrective lenses., • Must be able to hear clearly with or without hearing aid devises., • Must be able to walk and stand for extended periods of time and reach overhead regularly., • Must regularly be able to squat, bend, and stand., • Must be able to climb ladders occasionally., • Must be able to read and interpret precision measurement equipment. Education: A&P FAA license required • Bachelor's degree is not required; but is a plus. Knowledge, Skills, Demonstrated Capabilities: • Quality Control experience required, • Minimum 5 Years' experience in aircraft maintenance or related field, • MS Office experience preferred., • Basic data entry or word processing skills required., • Previous experience on turbo prop aircraft a plus., • Noise level may be loud at times Travel Required: Travel may be required (no more than 10%) Eligibility: US citizenship or Permanent Resident (Green Card Holder) Nature of Contacts: Moderate communication skills required on a daily basis with internal and external parties Benefits Equal Opportunity: Schedule: (1) First shift (1) Second shift Contract: 6 months contract-to-perm Pay: $33-$35/hr. ( DOE)

Job DescriptionDescription: About the Company: We provide specialized subcontracting and technical assistance services to support clients in the transport and aerospace industries. We work closely with clients to ensure that our solutions meet their needs and exceed their expectations. Our team members are motivated individuals that do remarkable things every day! Position Summary: AAA, United States, Inc. has partnered with a company in Charleston, SC that is a leading global aerospace manufacturer that specializes in the design and production of aircraft, aerospace equipment, and systems. With a rich heritage dating back to 1863, they are committed to delivering innovative solutions that meet the evolving needs of the aerospace industry. We are looking for experienced Tool Control Coordinator who are seeking their next opportunity in a complex and ever-changing work environment! As an Tool Control Coordinator you will play a key role in managing the flow of tools, equipment, and supplies essential to our production operations. Essential Functions: • Maintain an accurate inventory of tools, equipment, and consumables within the warehouse/tool shop., • Track tool usage, calibration schedules, and maintenance requirements in the tool control system., • Issue, receive, and inspect tools to ensure they are in proper working condition and safe for use., • Organize and maintain the tool storage area to ensure cleanliness, accessibility, and compliance with safety standards., • Assist with tool repairs, minor maintenance, and coordination of external calibration or repair services., • Identify and report missing, damaged, or worn-out tools and assist in procurement processes as needed., • Support production teams by ensuring tools are readily available, properly tagged, and in good working order., • Assist with cycle counts and inventory audits to maintain accurate records., • Communicate effectively with production, maintenance, and purchasing teams to address tool needs and resolve issues., • Follow all company policies and safety protocols to maintain a safe and organized work environment.Requirements:, • High school diploma or GED required., • 1–2 years of experience in a tool crib, warehouse, or similar inventory control environment preferred., • Mechanical aptitude with basic knowledge of tools, equipment, and aerospace manufacturing processes., • Strong attention to detail and organizational skills., • Ability to lift and move items up to [insert weight limit, e.g., 50 lbs.] as needed., • Basic computer skills, including familiarity with inventory management systems (preferred)., • Team-oriented, reliable, and proactive., • Ability to follow processes and contribute to continuous improvement.

Job Description OVERVIEW: Leads and assists in the construction, installation, and maintenance of communications towers and support structures and related telecommunications equipment. Leads by example to facilitate timely job completion. Tower Technicians work irregular hours, travel frequently, and work at great heights in extreme weather conditions. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Climbs and works on communications towers for the purpose of installing, replacing, and repairing antenna systems equipment. Does not require close supervision., • The basic use and care of hand tools and mechanical equipment., • Completes required daily Job Safety Analysis’ (JSA’s)., • Knows the hazards associated with tower climbing, construction equipment, and working on or near energized lines and equipment., • The ability to climb tall structures (100 feet or more) with 50 lb. load., • Analyzes situations accurately and adopts an appropriate course of action., • Communicates orally and in writing., • Follows instructions accurately and complete assigned course of action., • Recognizes safety hazards and performs duties in a safe manner., • Maintains clean, orderly environment adhering to company policies and industry regulation/standard(s) (OSHA), • Knowledge of custom tower rigging techniques., • Performs tape drops., • Proficient with topside testing procedures (sweeps, PIM, fiber testing etc.), • Performs GPS antenna alignment., • Proficient with installation of antennas, RRH’s, ground kits, RET systems., • Troubleshoots RET systems, • Runs required lines to top of the tower; grounds coax lines and builds different sizes and types of connectors., • Stacks tower steel and installs of sector mounts., • Basic knowledge of microwave dish and radio installations and path alignment, • Able to train lower-level tower techs., • Working knowledge of basic hand tools, mechanical equipment, and electro-mechanical equipment., • Knowledge of basic computer skills., • Self-motivated and able to learn quickly., • Must have High school diploma or equivalent., • 2 to 3 years of industry experience., • Good communication skills, reading and writing skills (English), • Ability to lift over 70 pounds., • Good computer skills. General knowledge and use of Microsoft office (Excel, Word & Outlook)., • Clean Driving Record & Valid Driver's License and reliable transportation to and from work., • Must be able to accommodate out of town travel, if required., • Working knowledge of basic hand tools, mechanical equipment, and electro-mechanical equipment., • ComTrain, OSHA10, RF Awareness Training, First AID/CPR trained., • Must have experience with Anritsu Site Master, Andrew, PPC, tower mapping and antenna equipment., • Must have experience stacking self-support towers, installing waveguide, antennas, and microwave dishes., • RF Awareness, replacement, and maintenance i.e., coax, jumpers, TMA’s, connectors, and weather proofing. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee is required to walk much of the time. The employee is also occasionally required to sit. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the employee regularly works near moving mechanical parts; in high, precarious places; and in outside weather conditions and is regularly exposed to wet and/or humid conditions and extreme heat. The employee is frequently exposed to risk of electrical shock and vibration. The employee is occasionally exposed to fumes or airborne particles, toxic or caustic chemicals, and extreme cold., • The noise level in the work environment is usually moderate.

Job DescriptionDescription: WE ARE HIRING IN MULITPLE LOCATIONS! Are you passionate about aviation and skilled in aircraft maintenance/manufacturing? We're seeking talented individuals like you to join our team as Aircraft Avionics Technicians in multiple locations!! Locations: • Florida, • Connecticut, • Alabama, • Texas, • Louisiana, • Arkansas, • Kansas, • Perform routine maintenance on avionics such as aircraft navigation systems, radar, in-flight entertainment systems (IFE), radio, etc., • Perform diagnostic and troubleshooting procedures on aircraft systems, • Communicate with other maintenance personnel regarding action plans, • Perform aircraft preventative maintenance and unscheduled repairs, • Develop, maintain, and repair aircraft avionics and navigation systems, • Communicate with mechanics and avionics technicians to troubleshoot non-avionics and engine-related issues, • Assist and oversee aircraft pre-delivery inspections, • Perform aircraft taxi inspections, • Communicate with mechanics to get necessary approvals for scheduled maintenance, • Competitive compensation and benefits package, • Opportunities for professional growth and development, • Supportive work environment with a focus on safety and teamwork, • High School Diploma or GED required., • 2+ years of related aerospace experience, • Knowledge of aircraft avionics systems, • Ability to troubleshoot, repair, and maintain aircraft avionics systems, • Ability to troubleshoot and repair electrical systems

Job DescriptionDescription: ECS is Seeking a HVAC Project Technician Foreman to join our Team. Responsible for the installation, repair, and maintenance of refrigerant piping systems in heating, ventilation, and air conditioning (HVAC) systems, including Direct Expansion (DX) systems, for commercial projects. This role involves supervising a team of technicians, coordinating with project managers, and ensuring that installations, repairs, and maintenance are completed efficiently, safely, and to the highest standards. This is a Working Foreman position. Key Responsibilities: • Install refrigerant piping systems for HVAC and DX systems, ensuring proper sizing, alignment, and secure connections., • Perform brazing, welding, and other specialized techniques for piping installation, including DX system components., • Install and maintain components of DX systems, including evaporators, condensers, and compressors., • Inspect existing refrigerant piping systems, DX system components, and refrigerant lines for leaks, damage, and necessary repairs., • Ensure refrigerant lines are insulated, properly sealed, and meet system requirements for energy efficiency and safety., • Work closely with project teams to meet deadlines, specifications, and regulatory standards for DX systems., • Maintain a clean, safe, and organized job site., • Adhere to all safety codes, regulations, and procedures while performing installations and repairs., • Provide guidance and training to apprentices and junior installers as needed. Benefits: • Health, dental, and vision insurance., • Life insurance and long-term disability coverage., • 401K with company match., • Paid sick leave, vacation, and 8 paid holidays., • Professional training and industry certifications., • Referral incentives and continuing education reimbursement., • Safety Boot Program - $150 reimbursement for the purchase of safety boots, yearly.Requirements:, • 10+ years of experience in HVAC refrigerant piping installation, and a strong background in DX systems. With at least 2 years in a leadership or foreman role, • In-depth knowledge of refrigerant systems, DX components, piping materials, and installation techniques., • Proficient in brazing, welding, and soldering for HVAC and DX refrigerant piping systems., • Ability to read blueprints, schematics, and technical diagrams for DX systems and refrigerant piping installations., • Strong troubleshooting skills with the ability to perform repairs on refrigerant piping and DX systems., • Excellent attention to detail, with the ability to identify and resolve system inefficiencies., • Ability to work independently and as part of a team., • Experience with large commercial HVAC projects.

Job Description Founded in 1984, Firetrol is the national leader in fire protection & life safety services. We are currently seeking Fire Sprinkler Helper to join our team of over 1200 of the best fire protection professionals in the industry. This opening is for the Mobile, AL office. • Assist with the performance of routine inspections, testing, and preventative maintenance of fire protection systems under direct supervision., • Assist with diagnosing and evaluate systems that require servicing as well as troubleshoot issues that arise during inspections under direct supervision., • Some positions available at dedicated sites. With day and night shifts available., • Similar trade experience a plus., • High School diploma or equivalent is required., • Must possess or be willing to obtain any applicable state licenses. Firetrol offers competitive wages and top-of-the-line benefits that include health, dental vision, life insurance, short and long term disability, generous paid time off practice and a 401(k) plan with a generous company match and immediate vesting. Additionally, sponsors training and education opportunities. Finally, Firetrol offers career growth opportunities, not just a job.

Job DescriptionJob Description: Structural Welder Pay: $30.00Sign-On Bonus: $1,000 EXPERIENCE: • Ability to weld in uncomfortable positions where applicable, • 2+ years of GMAW MIG welding experience, • Ability to pass A Class skills evaluation test to demonstrate welding ability for full penetration joint details, • Demonstrated ability to weld fillets for material thicknesses 4mm- 25mm, • Demonstrated ability to weld gusset toe and wraps with minimal blending required., • Demonstrated ability to weld frame wraps and terminations with minimal blending required., • Demonstrated ability to weld T-Bar wraps and terminations with minimal blending required., • Demonstrated ability to weld into corners / vertical intersections with minimal blending required, • Demonstrated ability to evaluate and correct basic weld pick up, with minimal supervision, • Demonstrated ability to terminate stich welds with minimal weld correction to address minor cosmetic or weld defects, • Demonstrated ability to weld continuously for 400mm, • Demonstrated ability to back step and sequence weld based upon provided information and/or good welding practices, • Demonstrated ability to weld multi-pass fillets with only cosmetic correction required, • Good mechanical aptitude with ability to produce consistent quality, • Ability to inspect and correct basic weld pick-up without supervision, • Good listening and verbal communication skills, • Ability to work independently and as part of a team, • Problem-solving and trouble-shooting skills, • Excellent hand-eye coordination; good spatial orientation, • Ability to consistently meet production deadlines, • Ability to read and interpret and work from construction drawings, job specifications, instruction manuals, manufacturer’s handbooks, change orders and contract specifications to obtain weld sizing information and material edge preparation requirements, • Ability and willingness to work with and to teach less-skilled workers, • Ability to maintain and perform routine preventive maintenance on welding equipment, • Ability to wear required PPERESPONSIBILITIES:, • Working in compliance with all safety, quality, environmental and health requirements, weld a variety of configurations including, but not limited to:, • Single-pass and multi-pass fillets in all positions, for all joint and material thickness configurations, • Multi-pass full penetration joint details, for all joint and material thickness configurations, • May instruct and mentor less-skilled welders, as assigned, • Works with a sense of urgency, efficiency and productive out put, • Ability to work shifts or overtime as required, must be flexible, • Maintain housekeeping, keep worksite free of rubbish, keep materials and equipment stowed in an orderly manner, • Medical Coverage, • Dental Coverage, • Vision Coverage, • Short Term Disability Benefits, • Term Life Benefits, • Note: The specific duties, skills and qualifications may vary depending on the company’s requirements and the nature of the tasks performed at the site. Employees must be willing to make reasonable adjustments to their tasks depending on the requirements of the client. We are an equal opportunity employer. We do not discriminate based on race, color, creed, religion, national origin, ancestry, citizenship status, marital status, age, sex, sexual orientation, gender identity, disability, veteran status, or any other protected characteristic as established by law. #TLRS

Job Description Are you an experienced commercial roofing estimator looking to elevate your career with a leading national roofing contractor? We’re seeking a detail-oriented professional to join our dynamic team, specializing in exciting projects. With our commitment to quality and innovation, you’ll play a crucial role in shaping the future of our projects. If you’re ready to make an impact and work with a dedicated team, we want to hear from you! Nations Roof, one of the largest and prominent leaders in the commercial roofing industry, ranked in the Top 5 Roofing Contractors in the US. Our projects range in scope from large-scale new construction to complete tear-offs, re-roofing and renovations of existing building exteriors, and on-going roof maintenance, inspection, and repairs of all major commercial roof systems. Why Nations Roof? • Innovative Projects: Be part of high-impact projects that shape the industry., • Career Growth: Enjoy opportunities for professional development and career advancement., • Collaborative Environment: Work with a team that values your insights and fosters a collaborative culture., • Competitive Compensation: Receive a competitive salary and comprehensive benefits package. Key Responsibilities: As an Commercial Roofing Estimator, you will play a crucial role in evaluating and preparing accurate and comprehensive estimates for a variety for commercial roofing projects across a variety of systems and manufacturers. This role requires a deep understanding of commercial roofing practices, exceptional attention to detail, and the ability to manage client relationships effectively. • Estimate Preparation: Prepare detailed and accurate estimates for commercial roofing projects, including labor, materials, equipment, site visits and overhead costs., • System Expertise: Demonstrate in-depth knowledge of all commercial roofing systems (e.g., built-up, modified bitumen, TPO, EPDM, PVC) and manufacturers to provide well-rounded solutions., • Client Interaction: Develop and maintain strong relationships with national clients, understanding their needs and providing exceptional customer service., • Quality Assurance: Ensure all estimates align with industry standards and best practices, maintaining high-quality and accuracy in every proposal., • Safety Compliance: Adhere to and promote safety standards and regulations, ensuring that all aspects of the project estimates reflect a commitment to safe work practices., • Market Analysis: Stay current with industry trends, pricing, and advancements in roofing systems to provide competitive and up-to-date estimates., • Professional Development: Engage in continuous learning and professional growth opportunities to stay ahead in the industry and contribute innovative solutions to the team., • Collaboration: Work closely with project managers, contractors, and suppliers to ensure that all project specifications and requirements are met, • Other duties as assigned. Requirements: • 5 years of experience in commercial roofing estimation, with a strong track record of working with clients. Any equivalent combination of education and experience may also be considered., • Comprehensive understanding of commercial/industrial roofing system design and installation code compliance, manufacturers requirements for warranty and industry standards., • Excellent analytical and mathematical skills, with the ability to provide precise and competitive estimates., • 5 years expereince Proficient with data base estimating digitizer computerize estimating software (Estimating Edge "The Edge", Software experience is a Plus), • Proficient in Microsoft Office Suite: Excel, Outlook, Power point, Word, • Must be a motivated self-starter with a professional appearance., • Ability to provide clear instructions and effectively explain problems or situations., • Valid driver’s license and insurable driving record, • Must be oriented towards teamwork. Exceptional Benefits: • Full-Time, Salaried Position, • Steady, Year-Round Work, • Cell Phone, and Business-Use Computer, • Medical, Dental, and Vision Benefits, • Life Insurance, • 401(k) Plan with Employer Contribution, • Holiday and Paid Time Off, • Career Advancement and Professional Development Opportunities The preceding job description has been designed to indicate the general nature and level of work to be performed. It is not meant to be interpreted as a comprehensive inventory of all duties and responsibilities required of employees assigned to this job. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Nations Roof provides equal employment opportunities without regard to race, color, religion, sex, national origin, age, disability, marital status, veteran status, sexual orientation, genetic information, or any other protected characteristic. Our company is a Drug Free Workplace. No Recruiters. All candidates must be authorized to work in the U.S.

Job Description Are you a Certified HVAC/Refrigeration Technician looking for a place to build your career - not just another job? We are looking a Journey Level Refrigeration Technician for full-time, year-round commercial service work in and around the Pensacola, FL area. Looking for the right job is tough. Come join us, and you won't need to look again! We are seeking career-minded techs who are ready to start their last job and enjoy the work/life balance we offer for years to come! With full benefits, paid holiday/sick/vacation time, room for growth, and team that has your back, this is the place for you! Apply now! RESPONSIBILITIES: · Maintain, diagnose, and repair multiple types of refrigeration systems, as well as all mechanical and electrical components related to the equipment (such as self-contained coolers and freezers, single and rack systems, etc.) · Perform minor plumbing repairs on refrigeration equipment, including walk-in drain lines, case drain lines, cooling towers and water-cooled condensers · Inspect plumbing, electrical, and refrigeration systems and identifying specifications that are required · Perform preventative maintenance and repairs for HVAC and Refrigeration · Collaborate directly with grocery store managers and store directors · Quote equipment repairs and recommend replacement when necessary · Maintain proper van stock, tools and safety equipment on work van SKILLS: · Good judgement for use of supplies and materials in refrigeration repairs · Attention to detail and critical analysis for diagnostics and work performed · Professional communication skills · Mechanical aptitude QUALIFICATIONS: · 2+ years prior HVAC/R experience · Be available for ON CALL work as needed · Ability to pass a physical/drug screen/background investigation/ driving abstract as needed BONUS POINTS: · Universal EPA License • Electrical License · 2-3 years of grocery refrigeration / HVAC experience · Related education/certification in HVAC and refrigeration industry It's time you take the first step into your last job! If you're done wasting time in the wrong place, apply now!

Job DescriptionWire Welder $1,000+ WEEKLY Join SAVARD Personnel Group - where your skills are valued! Key Requirements: • Must have wire welding with TIG Experience, • Must have the ability to perform precision TIG(Tungsten inert Gas) welding on various metals while also being proficient in wire-fed welding process (MIG:Metal inert Gas), • Must have the ability to read and interpret blueprints, • Must be able to set up and operate welding machines, • Ensuring high-quality and structurally sound welds, • Perform maintenance on equipment, • Monday-Friday 7am-4pm Duration: • Temp-Perm How to Apply: • Apply & Receive offers NOW! Download Savard 24/7 App!, • Call us at 225-930-0685 or 228-205-4595, • Job ID# 51092818

Job DescriptionØ Lead the electrical design for the facility’s capital projects.Ø Provide technical support to plant’s I/E maintenance group.Ø Perform breaker coordination/fault tolerance.Ø Perform short circuit analysis.Ø Perform arch flash calculations.Ø Determine motor specification and sizing of electrical starters.Ø Design and modification of lighting systemsØ In-depth knowledge of and experience designing industrial electrical systems.Ø Excellent verbal and written communication skills.Ø Excellent interpersonal and customer service skills to effectively interface with production groups.Ø Excellent organizational skills and attention to detail.Ø Excellent time management skills with a proven ability to meet deadlines.Ø Strong analytical and problem-solving skills.Ø Ability to prioritize tasks and to delegate them when appropriate.Ø Ability to function well in a high-paced and at times stressful environment.Ø Proficiency with Microsoft Office Suite (specifically Project), AutoCAD, EasyPower or related software preferred. QUALIFICATIONS / REQUIREMENTSv Bachelor’s in Electrical Engineeringv 8-10+ years of experience in industrial power E04JI800n8pv405g1lx

Job DescriptionDescription: WE ARE HIRING IN MULITPLE LOCATIONS! Are you passionate about aviation and skilled in aircraft maintenance? We're seeking talented individuals like you to join our team as Aircraft Mechanics in multiple locations!! Locations: • Florida, • Connecticut, • Alabama, • Texas, • Louisiana, • Arkansas, • Perform inspections, maintenance, and repairs on aircraft systems and components, • Diagnose and troubleshoot mechanical, electrical, and hydraulic issues, • Ensure compliance with all aviation regulations and safety standards, • Competitive compensation and benefits package, • Opportunities for professional growth and development, • Supportive work environment with a focus on safety and teamwork, • A & P Certificate, • Have at least 2 years aircraft maintenance experience or substantiated equivalent experience., • Ability to interpret and work with mechanical engineering drawings., • Ability to effectively communicate in both written and verbal form on individual and / or aircraft status., • Own a basic set of hand tools with the ability to demonstrate inventory & control of tools., • Must be able to obtain appropriate Ground Support Equipment Qualifications as required., • Have the ability to work unscheduled overtime including nonscheduled workdays and holidays.

Job DescriptionJob Title: Equipment Mechanic Job Summary: We are seeking a skilled Equipment Mechanic to join our team. The ideal candidate will have extensive experience in equipment maintenance and repair, particularly on telehandlers, manlifts, air compressors, and welding machines. This role requires expertise in troubleshooting electrical and hydraulic systems, as well as familiarity with small engine repair and basic shop safety practices. Key Responsibilities: • Perform maintenance and repairs on a variety of equipment, including telehandlers, manlifts, air compressors, and welding machines., • Diagnose and troubleshoot electrical and hydraulic system issues., • Conduct small engine repairs as needed., • Adhere to all safety protocols and maintain a clean and organized work environment., • Perform inspections and preventative maintenance to ensure optimal equipment performance., • Maintain accurate service and repair records.Preferred Qualifications (Not Required):, • Experience in maintenance and repair of Grove cranes, Manitowoc cranes, and marine travel lifts.Requirements:, • Minimum of 5 years of experience as an Equipment Technician., • Strong mechanical and troubleshooting skills., • Knowledge of electrical and hydraulic systems., • Familiarity with shop safety procedures., • Ability to work independently and as part of a team.

Job DescriptionCompany Description Express Oil Change & Tire Engineers is the pre-eminent automotive maintenance provider in the nation with over 350 locations across 21 states, leading our industry through excellence, innovation, and growth. Don’t let our name fool you, in addition to our fast oil change bays, our locations can be your one-stop shop with certified technicians providing a variety of mechanical services, as well as tire services. Job Description The Automotive Service Manager, reporting to the Store Manager, will be responsible for setting the highest standards of excellence and personifying our core values to support operations in the service department of your store. This will involve creating a highly-motivated team environment, and working closely with the Service Team to improve their performance through hands-on presence in the store by efficiently developing and coaching team members, and executing store processes & procedures. Primary Responsibilities include (but are not limited to): • Specific duties for this customer service role include, but are not limited to:, • Providing support in the store recruiting process by assisting the Store Manager on final employment decisions, • Supervising technicians and service personnel, planning and scheduling their duties, assigning work, and following up on completion of assignments, • Coaching service department teammates on all operational issues of working the process within the ISI systems and service standards, • Working directly with customers in areas of sales, service, customer opportunities, adjustments, etc., • Evaluating performance and productivity of all service department personnel, • Managing parts inventory and outside purchases, ensuring it complies with parts and Tire Purchase Program as well as updating and restocking all in-house parts when needed, • Ensuring store safety, including the use of and maintenance of safety equipment, • Ensuring equipment/hardware layout and positioning within the service department, • Supervising shop area, equipment and teammates for compliance with company safety procedure, • Coaching personnel on enforcing wheel torqueing process, • Ensures that proper inspections are being conductedQualifications We are looking for: • Outstanding leadership and store management skills, • Ability to work in a fast-paced work environment, • Highly organized and detail-oriented, with the ability to mentor others in a manner that ensures efficiency, • Excellent verbal and written communication, • Ability to develop professional relationships with customers and team members, • Minimum of 2 years’ experience in a Service Manager role, • Proven track record of exceeding business objectives, • Ability to work efficiently both individually and as part of a team, • Solid knowledge of basic OSHA laws and MSDS Compliance Additional Information All of your information will be kept confidential according to EEO guidelines. Physical Requirements: • Prolonged periods of standing, stooping, and bending, • At time, exerting 50 - 100 lbs of force occasionally and/or 10 - 25 lbs of force frequently and/or greater than 10 lbs of force constantly to move objects

Job Description Summary Thompson Engineering is looking for a highly motivated and skilled Cone Penetrometer (CPT) Rig Operator to join our dynamic geotechnical drilling team. We're seeking an experienced operator to safely and efficiently run our CPT rigs, collecting high-quality geotechnical data across diverse subsurface conditions. This role demands a strong grasp of CPT principles, mechanical expertise, meticulous attention to detail, and an unwavering commitment to safety. Key Responsibilities As a CPT Rig Operator, you will: • Rig Operations: Safely mobilize, set up, operate, and demobilize CPT rigs at various project sites., • Data Acquisition: Conduct CPT soundings per project specifications and industry standards, ensuring precise collection of tip resistance (qc), sleeve friction (fs), and pore water pressure (u2) data., • Equipment Maintenance: Perform routine maintenance, proactive troubleshooting, and minor repairs to CPT rigs and associated equipment (e.g., cones, rods, hydraulic systems)., • Calibration: Assist with or execute regular calibration checks of CPT cones and data acquisition systems to guarantee data accuracy., • Safety Compliance: Strictly adhere to all company safety policies, procedures, and OSHA regulations. Conduct daily safety checks, actively participate in tailgate safety meetings, and promptly report any hazards or incidents., • Documentation: Accurately complete daily field logs, sounding reports, maintenance records, and all other required documentation., • Site Management: Maintain a clean, organized, and environmentally compliant work area., • Collaboration: Work effectively with project managers, geotechnical engineers, field technicians, and other team members to achieve project goals., • Troubleshooting: Identify and resolve operational issues or data anomalies during CPT sounding. Education • Required: High School Diploma or GED., • Preferred: Technical schooling or vocational training in heavy equipment operation, mechanics, or a related field., • Required: Minimum of 2-3 years of experience operating heavy equipment, preferably within the geotechnical, drilling, or construction industry., • Highly Preferred: Prior experience specifically operating CPT rigs., • Proficient in reading and interpreting project plans, specifications, and safety guidelines., • Basic mechanical aptitude for troubleshooting and maintenance of equipment., • Required: Valid Driver's License with a clean driving record., • Preferred/Required (depending on rig size): CDL (Class A or B)., • Highly Desirable: OSHA 10-hour or 30-hour Construction Safety certification., • Ability to lift and carry heavy objects (up to 50 lbs.) regularly., • Ability to stand, walk, bend, stoop, and kneel for extended periods., • Ability to work outdoors in various weather conditions (heat, cold, rain, etc.)., • Exceptional attention to detail and accuracy., • Strong problem-solving abilities., • Reliable, punctual, and highly self-motivated., • Excellent written and verbal communication skills., • Ability to work both independently and collaboratively within a team., • Competitive salary, • Health, • Dental, • Vision, • 401(k) with company match, • Paid Time Off, • Training and development opportunities.

Job Description Fairstead is a purpose-driven real estate firm dedicated to building sustainable communities across the country. Headquartered in New York, with offices in Colorado, Florida, and Washington DC, Fairstead owns a portfolio of more than 25,000 apartments across 28 states that includes 25,000 units under management. Fairstead's commitment to communities is realized through a comprehensive platform that leverages in-house expertise in acquisitions, development, design and construction, asset management, and property management. Fairstead's primary mission is to provide high quality housing to all regardless of income, and to make our stakeholders feel "Right at Home." We accomplish this through an empathetic and innovative approach, and by utilizing our interdisciplinary platform as an investor, developer, owner, and operator. Fairstead's Core Values: Innovation, Determination, Integrity, Humility, Empathy and Partnerships The Service Manager manages and supervises the repair and maintenance of property buildings. They ensure the timely installation of mechanical equipment and upkeep of Fairstead's property to ensure operational effectiveness. The Service Manager oversees operational efficiency of all electrical equipment and mechanical systems through inspection and repair and ensure that property's premises and facilities are kept clean and hygienic in alignment with Fairstead safety policies and standards. RESPONSIBILITIES: • Supervision of other maintenance employees., • Taking a leadership position on special projects., • Perform a variety of skilled maintenance and repair tasks., • Strong knowledge of accident and safety precautions., • Proficient in a specific trade with general maintenance and repair skills., • Work independently on routine projects and receive assistance for more complex projects., • Occasional need to work overtime for special projects or emergencies. BENEFITS: • Generous employer contribution for Medical and Dental through United Healthcare., • Employer Paid Vision Plans., • Company Matched 401(k) Retirement Plan: 100% of the first 3%; 50% of the next 2%., • 12+ paid Holidays., • 15 days of PTO., • 7 Sick days., • Employer Paid Life Insurance., • Flexible Spending Account., • Nationwide Pet Insurance., • Disability Insurance., • Laser Correction Discount., • Employee Discounts on appliances, apparel, and more. QUALIFICATIONS: • Three (3) years experience in property maintenance., • Proficient in a specific trade with general maintenance and repair skills., • Knowledge of tools, techniques, and terminology of building and mechanical trades., • Strong knowledge of accident and safety precautions., • Knowledge and experience using a variety of tools and equipment to complete tasks., • Great organization and project management skills., • Able to implement and improve policies and procedures., • Proficient in Microsoft Office Suite. For information about how we use your personal information, including information submitted for career opportunities, please review our Privacy Policy at

Job DescriptionØ Drive mechanical assets to 100% availability to meet the unit’s daily production goals.Ø Zero unplanned equipment down timeØ Drive performance to the levels which we believe are our “Entitlement” using behaviors, tools and skills and support the Core Values in every aspect of the job.Ø Outstanding safety performanceØ Absolute environmental complianceØ Engineer innovative and practical solutions to maintenance, reliability, and operational issues.Ø Consistent product quality, proper design and documentation of the asset care plans and use of Six-Sigma tools to continually improve maintenance, reliability, and production.Ø Design and implement innovative upgrades to both maintain performance levels through PM’s, predictive maintenance and improve overall reliability and maintainability through projects.Ø Leadership· Demonstrates leadership in driving Zero-incident safety culture.· Implement established maintenance and reliability strategies.· Identify needed maintenance technician training and procedure development.· Identify and implement Cost Improvement and Cost Avoidance opportunities.Ø Processes· Respond to equipment failures and ensure that the daily production goals are achieved.· Support maintenance and capital replacements, repairs, and overhauls to mechanical equipment assets, including rotating & stationary equipment.· Write maintenance procedures, job plans and repair plans.· Document equipment failure history and costs using SAP and OEE data.· Perform routine mechanical equipment troubleshooting.· Perform repair vs. replacement analysis on equipment.· Perform equipment root cause failure analysis.· Scope out and implement equipment replacement and upgrade projects.· Perform Asset Management duties for equipment including maintaining files and database for equipment data, ensure standardization of equipment and standards for equipment, and organize and manage spare inventories as part of the overall asset care strategy for the assets.· Coordinate proactive fixes from Condition Monitoring findings with operations and maintenance personnel.Ø TEAM· Reports To: Mechanical Reliability Manager QUALIFICATIONS / REQUIREMENTSv Bachelor of Science Degree in Mechanical Engineeringv Minimum 3+ years post grad experiencev Prior Chemical, Plastics or Refining industry experience preferred.v Fixed Equipment trouble shooting and specification.v Experience with modeling tools such as Fathom, Compress, Aspen or Solidworks.v Excellent communication skills, both written and oral.v Self-motivated, well organized, and possess strong interpersonal skills.v Willingness to perform “hands on” field work, including testing and troubleshooting.v Knowledgeable with respect to Microsoft Outlook, Excel, and PowerPoint software programs.v Must have excellent time management skills and be able to multi-task effectively.v Ability to travel (typically <5%).v Successful completion of the Fundamentals of Engineering exam. v Professional engineering registration preferred but not required.v CMRP, Vibration Analysis Lev 1, Pump and Mechanical Seal Training Courses, API Certs preferred.v Knowledge of MI section of PSM Compliance E04JI800n8pv407m1i3

Job DescriptionDescription: About the Company: We provide specialized subcontracting and technical assistance services to support clients in the transport and aerospace industries. We work closely with clients to ensure that our solutions meet their needs and exceed their expectations. Our team members are motivated individuals that do remarkable things every day! Position Summary: AAA United States, Inc. is seeking skilled Supportability Engineer to provide technical leadership for maintenance analysis, life cycle costing, and logistics support across major shipbuilding programs. Essential Functions: • Coordinate project schedules and technical efforts related to maintenance planning, obsolescence management, and logistics analysis., • Responsibilities include performing detailed maintenance evaluations for shipboard systems covering organizational, intermediate, and depot-level maintenance., • Support Life Cycle Cost (LCC) and Total Ownership Cost (TOC) estimating efforts, and will conduct detailed supportability analyses, cost trade-off studies, configuration management, and supply support evaluations from concept development through system disposal., • Key tasks include developing preliminary preventive maintenance documentation (such as Maintenance Requirement Cards [MRCs] and Maintenance Index Pages [MIPs]), supporting the development of shipyard preservation and preventive maintenance procedures, and interfacing with Original Equipment Manufacturers (OEMs) to obtain Vendor Furnished Information (VFI)., • Responsible for ensuring that all change order activity affecting maintenance documentation is properly processed, documented, and communicated to the broader ILS team., • Successful candidates must demonstrate a willingness to cross-train within other areas of ILS as needed.Requirements:, • Bachelor’s degree in Engineering (Mechanical, Industrial, Electrical, or related field) or equivalent experience in Maintenance and Supportability Engineering., • Minimum of 5 years of Supportability, Logistics, or Systems Engineering experience supporting Government contracts., • Ability to read and interpret OEM Vendor Furnished Information, including technical drawings and parts lists., • Strong written and verbal communication skills are essential., • Proficiency with Microsoft Office products required., • Experience interfacing with internal and external stakeholders, including suppliers, engineers, and supply chain personnel., • Experience in Microsoft Office | Haystack | Navy PMS Editor | ACEIT or PRICE Cost Estimating Software | RMA Modeling Tools, • Life Cycle Cost (LCC) estimating experience preferred., • Reliability, Maintainability, and Availability (RMA) modeling experience preferred., • RCM (Reliability Centered Maintenance) Level II certification preferred., • Prior experience with U.S. Navy, Military Sealift Command (MSC), or U.S. Coast Guard programs is beneficial but not required.

Job DescriptionStructural Welder (Pulse Arc) $45/hr and $140 in per diem Job Description We are seeking a highly skilled Structural Welder with expertise in Pulse Arc welding techniques to join our team. You will be responsible for assisting on the building of nuclear powered submarines and aircraft carriers. This role requires a minimum of four years of experience in naval shipyard environments, specializing in various welding processes including Pulse Arc Welding (GMAW-P), Stick Welding (SMAW), MIG Welding (GMAW), and Flux-Core Welding. Responsibilities • Perform multi-pass, all-position fillet and butt welds using SMAW, GMAW, FCAW, and GMAW-P processes., • Work efficiently in physically demanding environments such as shipboard, sub-assemblies, and staging areas., • Ensure compliance with OSHA regulations pertinent to the shipbuilding industry., • Utilize air carbon arc gouging techniques and properly use fillet and butt weld gauges., • 4+ years of experience with GMAW, FCAW, and GMAW-P welding processes., • Experience in physically demanding environments and working with shipboard sub-assemblies., • Knowledge of OSHA regulations for shipbuilding., • Skill in air carbon arc gouging. The pay range for this position is $45.00 - $45.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Mobile,AL. Application Deadline This position is anticipated to close on Oct 13, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Mobile, AL: Flexicrew Technical Services (FTS) is seeking a Delivery Driver for an immediate direct hire opening. Essential Duties: • Safely drive truck to deliver and sell products or render services., • Apply knowledge of all applicable U.S. Department of Transportation rules and regulations., • Operate lift truck/tow motor to move palletized inventory to various staging areas., • Safely and efficiently roll compressed gas cylinders onto delivery truck and back as needed., • Deliver welding and cutting supplies, including compressed gases, welding machines, safety supplies, and other industrial products to customers., • Exchange full gas cylinders for empty cylinders and prepare delivery documents., • Collect payments from customers and record transactions., • Write customer orders and provide instructions for deliveries., • Keep track of daily sales and delivery records., • Inform customers of new products or services and promote sales materials., • Resolve customer complaints and provide assistance as needed., • Perform routine truck maintenance and ensure the truck is clean and orderly., • Follow all safety protocols and ensure safety during deliveries and truck operation. Requirements/Skills: • High school diploma or GED; or one to three months of related experience or training., • Commercial Driver's License (CDL) - Minimum Class C with Hazardous Material endorsement., • Valid DOT Medical Card and ability to pass all required DOT physical and drug screenings., • Ability to read and comprehend simple instructions and write basic correspondence., • Basic math skills including addition, subtraction, multiplication, and division using American money and weight measurement., • Ability to apply common sense to follow written or oral instructions., • Strong customer service skills and the ability to resolve service complaints., • Ability to work independently and as part of a team in a fast-paced environment. Physical Requirements: • Regularly required to sit, stand, reach with hands and arms, and talk or hear., • Frequently required to lift and/or move up to 25 pounds, and occasionally lift and/or move more than 100 pounds., • Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus., • Exposure to outside weather conditions and occasional exposure to moving mechanical parts, fumes, or chemicals. Equal Opportunity Statement: Flexicrew Technical Services is an Equal Opportunity Employer; employment with FTS is governed on the basis of merit, competence, and qualifications. Employment or consideration will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability, or any other legally protected status. Company DescriptionFlexicrew Technical Services (FTS) was founded in 2015 to meet the growing demand for technical and professional talent. We are a WBENC Certified executive and technical search firm providing custom-tailored staffing solutions and talent acquisition to the Gulf South Region and nationwide.Flexicrew Technical Services (FTS) was founded in 2015 to meet the growing demand for technical and professional talent. We are a WBENC Certified executive and technical search firm providing custom-tailored staffing solutions and talent acquisition to the Gulf South Region and nationwide.

Job Description Retail Technologies, Inc. - Media & Supplies Sales Representative Retail Technologies, Inc. (RTI) is a solutions company specializing in shelf edge printing and marketing to self-service retail businesses nationwide including grocery, convenience, pharmacy, beverage, hardware, sporting goods, specialty, general merchandise, and other formats. We have been serving retail and wholesale customers in all 50 states and abroad for over 38 years. We provide industry-leading sign and label printing software solutions, shelf edge labels, talkers, and cardstock display signage products. In addition, RTI provides printer hardware and supplies and shelf fixtures to facilitate all display signage. We offer a complete solution to empower retailers to engage their customers at the point of decision, the shelf edge. Daily Responsibilities/Duties will include: • Assisting sales teams in answering incoming phone calls and directing them to the appropriate person/dept., • Making outbound developmental sales calls to current customers and prospects/leads – 25 calls per day minimum., • Order entering and processing of eCommerce, Call-in, and Email orders for our shelf edge media products, printer supplies, and software maintenance & support., • Updating customers with order confirmations, tracking/delivery info., • Utilizing our CRM software/customer database, INFOR, and QuickBooks, to manage customer accounts and sales. Training provided., • Working closely with RTI employees in other departments to service the customer., • Working closely with RTI vendors and distributors to facilitate product fulfillment and delivery to the end user (customer location)., • Must be a clear communicator., • Telephone sales skills a must., • Polite, friendly, and a self-starter – upon training, a continual phone/email outreach to engage the customer and offer our best fitting products and solutions – this is a consultative sales position., • Excellent Customer Service and Customer Retention Skills necessary., • Entering and transferring data in our sales CRM database., • The ability to use MS Windows OS including Outlook and Office suite is a must. .Business to Business Sales Experience preferred Weekly Hours are: Monday – Friday 8 am – 5 pm Weekends and major holidays are off. Compensation: Salary starts at $30,000 base plus commission to reach $40-$50K annually to start. There is no limit to the commission that you can earn. Company DescriptionRetail Technologies, Inc., is a Mobile, AL based software company specializing in providing sign and bar-code label printing solutions to retailers nationwide.Retail Technologies, Inc., is a Mobile, AL based software company specializing in providing sign and bar-code label printing solutions to retailers nationwide.

Job Description Genesis Technical is seeking a Sr. Electrical Designer with strong REVIT and EPC design experience. Work Schedule: Hybrid preferred - Possibly remote for select candidates Location: Greenville, SC | Mobile, AL | Birmingham, AL | Savannah, GA | Raleigh, NC | Kansas City, MO | Cincinnati, OH | Salt Lake City, UT | Appleton, WI Must have very strong design skills in REVIT software and working within an EPC engineering office environment. Summary: • Design power system facilities and equipment and coordinate construction, operation, and maintenance of electric power generating, receiving, and distribution stations, and distribution systems and equipment, • Develop equipment specifications, • Develop construction specifications and contractor scope of work documents, • Directs preparation of or prepares drawings and specific type of equipment and materials to be used, in construction and equipment installation, • Inspects completed installations for conformance with design and equipment specifications and safety standards, • Work products will include: one-line diagrams, wiring drawings, panel layout drawings, motor schematics, instrument loop sheets, conduit and tray routing drawings and contractor scope documents, • Work with systems and equipment grounding requirements (high resistance, building and isolated grounding), • Provide on-site start up support Background/Experience: • 5+ years of experience with design/installation of medium and low-voltage distribution equipment, with experience in consulting engineering and construction industry, • Strong knowledge of applicable codes and standards (NEC, ANSI, NEMA, NFPA), • Able to handle onsite plant projects with minimal supervision, • Well organized with a demonstrated ability to meet deadlines and operate within budgets and work directly with client engineers and maintenance teams., • Seasoned knowledge of Autodesk Revit required., • Capability with CAD systems including AutoCADCompany DescriptionDynamic Engineering firm with incredible team culture and long term growth opportunities!Dynamic Engineering firm with incredible team culture and long term growth opportunities!

Job Description Pet Care Enrichment Counselor Job Description General Summary of Job The Pet Care Enrichment Counselor is responsible for the supervision, control and management of daycare dogs participating in enrichment activities and ensuring the safety of the playgroup. The counselor will ensure the appropriate and safe use of all enrichment equipment and obstacles. Additionally, the counselor is responsible for the maintenance and cleaning of the playrooms, enrichment rooms and equipment as well as other areas of the facility as assigned. The Pet Care Enrichment Counselor works under the supervision of the Pet Care Coordinator and reports to the Pet Care Supervisor. Primary Duties • Dog Enrichment, • Prepare enrichment supplies, equipment and rooms for daily activities as planned by Senior Enrichment Counselor or Coordinator., • Execute scheduled enrichment activities as assigned by Coordinator., • Document enrichment session progress and results for each dog for preparation of report cards., • Clean enrichment equipment and rooms., • Dog Management, • Interact with dogs in playgroups using appropriate toys and tools to ensure safe levels of play and minimizing stress levels of all dogs in playgroup. Maintain visual observation of dogs at all times and spread attention and play among all dogs in playgroup., • Control level of play by following dog management and control procedures and instructions provided by Pet Care Coordinator., • Use proper dog handling techniques including use of kennel leads to transfer dogs., • Use proper dog introduction procedures., • Use appropriate praise and dog redirection methods., • Ensure you know all dogs in playgroup and can properly identify them. If not, request assistance from Coordinator. Use paper id collars to identify dogs that are similar in appearance., • Watch all new dogs carefully and immediately consult with Pet Care Coordinator if you have concerns. For all dogs in playgroup; report any unusual behavior, or eliminations and injuries to the Coordinator immediately., • Review special needs list and manage dogs as instructed. Complete the maintenance report for all dogs in playgroup., • Ensure staff that relieve you for break or shift change know all dogs in group, the special needs dog status and any unusual behaviors or concerns you have been managing during your shift. If the next shift staff is not available, update the Coordinator before leaving., • Plan how dogs will be put in enclosures for meals in accordance to procedure. Consult Coordinator if you have concerns on being able to put all dogs away properly in your playroom., • Review information on whiteboard in hall and in playroom before start of shift and comply with instructions. Review dog profile of any dog you do not know prior to starting shift., • Complete dog incident reports timely when required. If you are not sure whether a report is required check with Coordinator., • Complete maintenance or repair reports as needed. Immediately report any out of stock items to Floater or Coordinator., • Lodging Dog Duties, • Provide potty breaks and exercise and enrichment sessions for lodging dogs as assigned. Potty area visits should be a minimum of 15 minutes per dog per session (3 potty area visits per day). Document on lodging report results of each potty break., • Maintain each pet's room to ensure that the dog has water and the room is clean and dry., • Perform lodging dog exercise/enrichment sessions and give treats as assigned. Be sure to sign off on the exercise & treat schedules and each dog's lodging report that tasks have been completed., • Ensure that potty area and room areas are clean at end of assignment., • Floater and Cleaning Duties, • Complete floater duties as described in Floater Duties Checklist. Turn in completed checklist at end of shift. Advise Coordinator or management of any incomplete duties that will need attention from the overnight staff., • Complete cleaning duties as assigned and indicate proper completion by signing the Monthly Cleaning Checklist., • Maintenance potty areas in accordance to procedures., • Report supplies needed to Coordinator prior to running completely out of item., • Cattery and other animal care duties, • Clean and maintain cattery as outlined on schedule. Initial form to indicate tasks were completed., • Provide care or potty breaks to other dogs as assigned (puppies, groom dogs, etc)., • Sleepover management (when approved by management), • Review overnight folder, dog board and review dog profiles upon arrival. Clarify any concerns prior to Coordinator or management leaving for day., • Read all Lodging Cards and ensure all dogs are properly fed., • Maintain safety of all dogs during shift. If you must leave the play floor put high energy, snappy or potential problem dogs in runs/crates prior to leaving playroom., • In the event of a dog incident or emergency contact management at home immediately. If you do not reach them, contact a Pet Care Coordinator. If no one is reached follow emergency procedures., • Enforce Company policies regarding approved drop-off and pick-up times. Contact management to approve an unexpected client drop-off. Do not allow unknown persons into property after hours. Staff visitors are not allowed in premises after hours without prior approval from management., • In the event you note unknown persons on the grounds that are disturbing you and/or dogs or damaging property, call the police. If immediate danger is a concern call 911, if not use the police non-emergency number. Complete an incident report for management., • Other duties as assigned Job Posted by ApplicantPro

Job DescriptionTridentCare is the leading mobile diagnostics company in the nation. We’re making a difference in lives of our patients every day! Top 3 reasons Radiologic Technologists love working here: Enjoy the variety of work each day brings! Thrive in an environment where making decisions independently is encouraged and supported! Not confined to a hospital or doctor's office! Full Time Position. Radiology Technologist will provide service to our nationwide Long Term Care and outside the hospital client base. Will complete diagnostic exams in a professional and timely manner. RT will be provided with all overhead including vehicle, x-ray equipment, gas card, PPE and developing tools. RT will interact with our Call Center Dispatch Associates to pick up cases and report cases that are completed. PAY RANGE: $28.00 - $30.00 SIGN-ON BONUS- $4,500 HOURS: Monday - Friday 8:30am - 5:00pm with weekend rotation ROLE: Provide mobile X-Ray and EKG (if applicable) services to our client base TASKS AND RESPONSIBILITIES: • #1 responsibility - Be ON the team! Each of our team members will work to make each other and our processes better every day. Hold yourself and your teammates accountable for spreading compassion, demonstrating empathy, and upholding our values. Protect and nurture a healthy workplace culture. Do this for your teammates, for yourself, for the organization, and for our patients., • Interact with patients compassionately and professionally by driving company vehicle to each patient, within designated service area, • Load and unload equipment from company vehicle, using ramps, and transport to each patients’ bedside, • Perform quality x-rays and EKGs to transmit to radiologist/cardiologist for interpretation, • Maintain equipment cleanliness and maintenance schedule, • Assist in other service areas, as needed, • Submit accurate and timely timesheets, as per protocol, • Other:, • Scanning, filing, faxing, photocopying, mailing, • Attend and participate in meetings, • Demonstrate regular attendance, • Train other technologists, as needed, • Basic computer knowledge, • Basic ability to use mobile device and apps, • Flexibility to adjust to changes and process improvements, • Ability to work independently, • Professional communication skills, both written and oral, • Maintain required State licenses/ARRT Certification, • Annual TB screens, physicals, and vaccinations, as required TridentCare offers a competitive wage and robust benefit package to full time employees. Benefits include: • Medical insurance allowance, giving you the freedom to customize your plan to fit your needs, • Dental insurance, • Vision insurance, • Disability insurance, • Company paid life insurance, • Accrued vacation time, • Accrued sick time, • 6 paid holidays, • 2 paid floating holidays, • 401(k), • Accrued vacation time, • Accrued sick time, • 6 paid holidays (Prorated), • 2 paid floating holidays, • 401(k) Healthcare heroes, x-ray, xray, imaging #MBX

Job Description CDL Truck Driver Job Summary Job Summary: We are seeking a skilled CDL Truck Driver to join our transportation team. As a CDL Truck Driver, you will be responsible for safely and efficiently transporting goods and materials to designated destinations. Your role will play a crucial part in ensuring the timely delivery of products and contributing to our company's reputation for reliability. CDL Truck Driver Duties and Responsibilities • Operate commercial vehicles, including tractor-trailers, box trucks, or other specified vehicles, in compliance with all applicable laws and regulations., • Safely load and unload cargo, ensuring that it is properly secured to prevent damage during transit., • Plan routes and schedules to meet delivery deadlines while optimizing fuel efficiency and minimizing downtime., • Conduct pre-trip and post-trip inspections of the vehicle, reporting any maintenance or safety issues promptly., • Maintain accurate records of trips, including driver logs, mileage, and delivery receipts., • Adhere to all traffic laws and regulations, including hours-of-service requirements., • Communicate effectively with dispatchers and supervisors to provide updates on delivery status and address any issues or delays., • Assist with the loading and unloading of cargo, as needed, and ensure the accurate counting and inspection of freight., • Handle paperwork and documentation associated with shipments, including bills of lading and delivery confirmations., • Operate equipment, such as liftgates, pallet jacks, and hand trucks, to facilitate the loading and unloading process., • Maintain a clean and organized truck, inside and out, and perform routine vehicle maintenance tasks., • Ensure compliance with safety protocols, including the use of personal protective equipment (PPE) and safe driving practices., • Provide exceptional customer service by interacting professionally with clients and handling inquiries or concerns., • Valid Commercial Driver's License (CDL) with the appropriate class and endorsements (e.g., Class A, Class B, hazmat, tanker)., • Minimum of [X] years of experience as a CDL truck driver., • Clean driving record with no history of major accidents or traffic violations., • Knowledge of and adherence to all federal and state transportation regulations., • Ability to operate and maintain commercial vehicles safely and effectively., • Strong attention to detail and organizational skills for managing paperwork and logs., • Excellent communication and interpersonal skills for working with dispatchers, customers, and team members., • Physical fitness and the ability to lift and move heavy cargo as needed., • Familiarity with GPS navigation systems and route planning software., • Willingness to work flexible hours and adapt to changing schedules., • Commitment to safety, both for oneself and others on the road., • Professional and customer-oriented attitude.

Job DescriptionSalary: $60,000-$80,000 Location: Mobile, AL & Dothan, AL About the job Currently seeking a skilled Controls Technician who is proficient in Honeywell or Schneider Electric control systems. The ideal candidate will have a strong background in both IT and mechanical systems, with a certification or demonstrable experience in Tridium N4. Key Responsibilities: Installed, maintain and troubleshot Honeywell and Schneider Electric control systems used in HVAC, lighting, and metering within commercial settings. Program and configure controllers and systems to optimize building operations and energy efficiency.Collaborate with IT departments to ensure integration of network-based control systems.Perform diagnostic checks and repairs on mechanical systems to ensure proper interaction with control systems.Update and modify existing systems to meet new requirements and to leverage technological advancements.Provide technical support and training to customers and internal teams.Document processes and maintain records of systems performance, including troubleshooting steps and resolutions.Participate in on-call rotation for emergency repairs and maintenance Required Qualifications: Associates degree in Engineering TechnologyMinimum of 3 years experience working with Honeywell or Schneider Electric controls or another Tridium N4 product line.Strong understanding of mechanical systems related to HVAC and building controls.Proficiency in IT-related tasks, including network configuration and troubleshooting.Certified or experienced in Tridium N4; N4 certification strongly preferred.Ability to read and interpret technical diagrams and blueprints.Excellent problem-solving skills and the ability to work independently. Preferred Qualifications: Bachelors degree in a related field.Experience in a supervisory or a lead technician role.Additional certifications in building automation or energy management. remote work

Job Description We are seeking a skilled and dedicated Commercial and Residential HVAC Service Technician to join our team. The ideal candidate will have a strong mechanical background and 2+ years of experience in commercial and/or residential air conditioning and refrigeration systems. As an HVAC Service Technician, you will be responsible for maintaining, repairing, servicing, and troubleshooting heating, ventilation, and air conditioning systems on residential and commercial properties. Equipment types that will be worked on include: 2-10 ton residential units and 10-30 ton commercial units. This is not a seasonal position; it is permanent and full-time. Wage will be based on experience and discussed during the interview. Applicant must have a clean FL Driver's license and be drug free. General Responsibilities • Service HVAC systems, including air conditioning units, furnaces, and refrigeration systems., • Perform routine maintenance on existing HVAC equipment to ensure optimal performance., • Troubleshoot and repair malfunctioning HVAC systems, identifying issues related to mechanical components., • Collaborate with property maintenance teams to address HVAC-related concerns in a timely manner., • Ensure compliance with safety regulations and industry standards during all repairs., • Proven experience as a commercial and/or residential HVAC Service Technician role in the heating and cooling industry., • Strong mechanical knowledge with the ability to diagnose and repair HVAC systems effectively., • Ability to perform property maintenance tasks related to HVAC installations., • Proficiency in plumbing, welding, and refrigerating techniques is a plus., • Excellent problem-solving skills with attention to detail., • Competitive hourly wage, • 401K with a 3% match., • Paid TIme Off and 6 paid holidays., • Service Vans., • Full healthcare package available. Employer pays 50% of employee’s health insurance on the base plan., • Digital/Mobile service reports. no written paperwork orders., • HVAC, • HVAC Service & Installation

Job Description Pay Range $70,000-$90,000 with commission opportunities. Rainbow Ecoscience (a division of Rainbow Companies) is seeking a Mid-South Sales Territory Manager covering Arkansas, Tennessee, N. Alabama & N. Mississippi whose primary responsibility will be to identify plant health care clients in the green industry. This position partners with commercial tree care and landscape maintenance companies, municipalities, and other organizations who manage insects, diseases, and plant health of trees and shrubs - including all aspects of educating, proposing, and closing sales to existing clients and the cultivation of new customers. A territory manager must be knowledgeable and experienced around diagnosing and managing tree and shrub pest issues, tree and shrub identification, and communicating and training others to achieve success with their plant healthcare programs. Lastly, strong interpersonal skills and a high degree of organization are necessary to manage a large volume of appointments, proposals, and sales follow-ups in a high-quality manner. This is a remote, full-time position that requires the ability to travel up to 50% within the territory. What You Will Do • Generate leads and deliver meaningful sales demonstrations for prospects and current clients to best serve them in growing their plant health care business with Rainbow products, protocols, and application equipment., • Attend and speak at local conferences, meetings, and industry events to create awareness and develop relationships with key influencers in the Treecare and Landscape Maintenance industry., • Work within our sales process to ensure that our clients are communicated with frequently and effectively to optimize opportunities., • Create a positive client experience by providing top-tier customer service and a consultative selling approach., • Identify new and existing customer opportunities to grow accounts and identify new business opportunities., • Document and regularly use and update customer information, sales workflows and sales activities in CRM (Acumatica)., • Develop and regularly update a working prospect list for the territory., • Industry sales experience in the tree care and/or landscape maintenance industry is preferred., • Bachelor of Science in Horticulture, Urban Forestry, Biology, Environmental Science OR equivalent practical experience., • Position comes with base salary + commission opportunities, • Employee Stock Option Program in our 100% Employee-Owned Company, • PTO and Paid Holidays, • 401K Contribution Option with Match, • Full Range of Benefits available, including Medical, Vision, Dental, Disability, & Life Insurance Ability to work outside and walk through commercial and residential landscapes while exposed to heat and cold. May be required to bend, reach, stoop, and lift objects; may be exposed to conditions including chemicals, the use of tools, and equipment. Safety precautions must always be followed, including the use of PPE (Personal Protective Equipment) and other safety equipment. You must be able to lift 50 pounds at any given time. You Should Know Rainbow Companies was founded in 1976 with a vision to preserve the historic American elm trees in Minnesota. We have evolved into a multi-faceted company dedicated to serving clients around the world, transforming the way ecosystems are maintained. We lead with innovation and achieve predictable results through science-based practices, research, and training. Rainbow is a 100% employee-owned company, and our employees are the core of our success. We work collaboratively and foster teamwork through communication and integrity. We are guided by our core values in which we work and succeed. At Rainbow, we celebrate our differences and are an Equal Opportunity Employer. We will not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or other protected status. Rainbow Tree Company is a recognized Top 150 Workplace in Minneapolis/St. Paul.

Job DescriptionDescription: Morin Repair Service is seeking an experienced Manual Machinist to join our team. The ideal candidate will have a strong background in an industrial setting working with tools such as lathes, mills, and drill presses. Morin has been recognized as superior in equipment sales, distribution, repair, and service. This is your chance to become a part of a hard working, dedicated team! Under minimal supervision, sets up and operate manual machine shop equipment such as lathes, mills and drill presses in skilled precision and bench work in the manufacturing of parts and fabrication, maintenance, repair and alteration of machinery, machine parts, tools and equipment. ESSENTIAL DUTIES AND RESPONSIBILITIES (include the following, however, other duties may apply.) • Performs all tasks in a timely, safe and responsible manner., • Reads and interprets blueprints, can work from shop sketches and duplicate sample parts., • Use micrometers, dial bore gauges, dial indicators along with assorted gages and measuring instruments to measure and or meet tolerance requirements as prescribed during the refurbishment process of a piece of rotating or linear motion equipment., • Use and be proficient with precision machine tools, machinery and equipment such as lathe, vertical and horizontal milling machine, drill press, hydraulic press, chop saw, band saw, push and pull broaches and a variety of cutting tools and equipment., • Provide periodic support during normal hours but also to be available as part of the technical team for afterhours call in and/or emergency/unscheduled repairs of various equipment as it is processed through the service center., • Familiarity of work to machine finish parts out of various metals, plastics and composites, • Familiarity with set up of machine tools to include properly and safely select, aligns, secures and removes holding fixtures, cutting tools, attachments, accessories and materials onto machines, • Recognize properly use cutting tools including carbide inserts, fixtures and tooling, • Participate in daily, regular housekeeping and cleaning of work area., • Evaluate procedures and recommend change or modifications for efficiency and adaptability to setup and production, • Ability to work directly with Shop Manager and shop Rotating Equipment Specialists during the Disassembly, Clean & Inspection (DCI) and the Assembly of various industrial equipment as they are evaluated and or assembled, • Utilizes and abides by general good machine shop practice and safety procedures, • Comply with all quality policies, specifications, regulations and instructions and have the ability to generate good shop “sketch” of parts as they are contrived.Requirements:, • 2+ years relevant manual machining experience, • Trade school or applicable training, • Must be able to lift and carry or otherwise move up to 50 pounds regularly

Job DescriptionDescription: WE ARE HIRING IN MULITPLE LOCATIONS! Are you passionate about aviation and skilled in aircraft maintenance/manufacturing? We're seeking talented individuals like you to join our team as Aircraft Interior Mechanics in multiple locations!! Locations: • Florida, • Connecticut, • Alabama, • Texas, • Louisiana, • Arkansas, • Inspect, remove, repair and install aircraft interior pieces, including doors, galleys, seats, bulkheads, floor boards, emergency path lighting, gill liners, closets, galleys and lavatories., • Become familiar with and follow the requirements of this RSQM, Federal Aviation Regulations, Airworthiness Directives, Advisory Circular, manufacturer’s service bulletins and any other required references to perform their assigned work. Never begin any maintenance unless in possession of the proper, current and applicable approved or acceptable data., • Ensure the work area is kept to the highest standards of safety, compliant at all times, enforcing regulations and practices to avoid accidents. Ensure that good housekeeping practices are performed at all times., • Perform the proper tagging of Aircraft components, parts and panels appropriately stored (including racks by aircraft)., • Perform documentation procedures and sign-offs in accordance with Repair Station Manual and respective task requirements., • Ensure that tools and equipment are correctly used and handled for both safety and to reduce breakages, wear and tear. Ensure tooling, GSE and ground equipment is returned to its proper storage area following use., • Strive for continuous process improvements and increasing efficiencies in execution and delivery with safety as a priority., • Deal with customers in a cordial, respectful and professional manner., • Competitive compensation and benefits package, • Opportunities for professional growth and development, • Supportive work environment with a focus on safety and teamwork, • High School Diploma/GED., • 3+ years aircraft maintenance experience on current fleet types being maintained or modified by the Repair Station., • 5+ years' experience on VVIP aircraft interior installation., • Proficient in oral and written English., • Valid and current FAA Mechanic certificate with an Airframe rating, or meets qualification and experience requirements for the issuance of a Repairman’s Certificate, • Able to perform intermediate/ major/heavy aircraft maintenance tasks with no supervision., • Understand specific design and operation of installed aircraft structures to enable effective troubleshooting, repair and modification of systems and components.

Job Description Job Title: Superintendent – Field Operations Job Location: Mobile, AL Job Type: Full-Time Position Overview: InLine is seeking a results-driven Superintendent to oversee daily field operations across multiple job sites. This leadership role is responsible for managing field crews and foremen, ensuring projects are completed on time, within scope, and to the highest safety and quality standards. The ideal candidate is a hands-on problem-solver with strong leadership, communication, and project coordination skills in a fast-paced infrastructure environment. Key Responsibilities: * Lead, supervise, and coordinate multiple field crews and foremen across job sites. * Collaborate with Project Managers and Engineers to execute work in alignment with project goals and specifications. * Ensure strict adherence to project timelines, safety protocols, and quality standards. * Interpret blueprints, specifications, and construction documents to guide field execution. * Schedule and coordinate manpower, equipment, and materials to meet production goals. * Conduct daily site visits, safety inspections, and toolbox talks. * Monitor subcontractor performance and ensure compliance with contract requirements. * Track and report job progress, delays, incidents, and daily production quantities. * Resolve on-site issues promptly to maintain workflow and avoid downtime. * Serve as the primary point of contact for field-related issues and communication with vendors, inspectors, and stakeholders. * Support procurement, logistics, and equipment coordination efforts as needed. Required Skills and Qualifications: * Valid Driver’s License and reliable transportation. * Minimum 5 years of construction experience with 2+ years in a supervisory role. * Proven experience managing crews in the following work types is highly preferred: * Underground installations * Pole and traffic signal foundations * Electrical (including low-voltage and infrastructure wiring) * Bridge, roadway, and parking lot lighting * Airport lighting systems * Traffic signals, ITS, and fiber optic systems * Strong knowledge of construction safety standards and best practices. * Proficient in reading construction plans and using scheduling tools. * Excellent organizational, leadership, and communication skills. * Ability to work independently and under pressure in an outdoor environment. Preferred Skills: * OSHA 30 Certification * CDL License or equipment operation experience * Background in electrical, traffic control, or heavy civil projects Working Conditions: * Outdoor work environment in varying weather conditions. * Frequent travel between job sites within the region. * Requires standing, walking, lifting, and operating around active construction equipment. Schedule: * 10-hour shifts, Monday to Friday, with occasional weekend or night work as needed. Benefits: * Health, Dental, and Vision Insurance * Paid Leave * 401K Plan with company match * Company Vehicle or Travel Allowance Compensation: * $28 to $40 plus overtime * Competitive salary is based on experience and qualifications How to Apply: * Apply online at ZipRecruiter or InLine Careers Company Website: Company DescriptionJoin InLine: Leading the Future of Intelligent Transportation InLine, a trailblazer in Intelligent Transportation Systems and Communication Network Construction, seeks over 20 professionals to expand our dynamic team. With over 30 years of industry leadership, we offer exciting roles in ITS, Traffic Signals, EV Charging Stations, and Roadway Lighting. What We Offer: Collaborative environment with professional growth opportunities Innovative projects in construction and maintenance A forward-thinking company focused on sustainable, cutting-edge solutions Your Role: Contribute to the development of smart transport infrastructures, utilizing the latest technologies. Make a significant impact in enhancing how cities move and communicate. Apply Now: Embark on a career that propels you into the future. Be a part of a company that leads the industry change. Join InLine and move forward with us.Join InLine: Leading the Future of Intelligent Transportation\r\n\r\nInLine, a trailblazer in Intelligent Transportation Systems and Communication Network Construction, seeks over 20 professionals to expand our dynamic team. With over 30 years of industry leadership, we offer exciting roles in ITS, Traffic Signals, EV Charging Stations, and Roadway Lighting.\r\n\r\nWhat We Offer:\r\n\r\n Collaborative environment with professional growth opportunities\r\n Innovative projects in construction and maintenance\r\n A forward-thinking company focused on sustainable, cutting-edge solutions\r\n\r\nYour Role:\r\nContribute to the development of smart transport infrastructures, utilizing the latest technologies. Make a significant impact in enhancing how cities move and communicate.\r\n\r\nApply Now:\r\nEmbark on a career that propels you into the future. Be a part of a company that leads the industry change. Join InLine and move forward with us.