Trabajos medical assembly en Jersey City, New JerseyCrear alertas

\n Job Description \n The primary objective of this job is to improve quality, treat and support patients and family members in a caring professional manner and fulfill the hospital’s mission to serve our patients and their families by. \n Job Responsibility \n 1.Responsible for the smooth functioning of activities during the surgical procedure. This person is garbed in sterile attire and must remain within the sterile field. 2.Knowledgeable of the proposed surgical procedure anticipates the surgeons needs and efficiently carries out instructions by the surgeon, anesthesiologist and circulating nurse. 3.Assists the circulating nurse in the assembly and preparation of all supplies, instruments and equipment required for proposed surgical procedure utilizing physician resource map as a tool. 4.Assists the circulating nurse in the proper opening of sterile supplies onto the sterile field. In this function, the OR technician should be mindful and caution should be taken to avoid the opening of supplies which may be unnecessary for the procedure. 5.Checks order and tidiness and proper functioning of suction, lighting and equipment. 6.Is knowledgeable in the positioning of patients for surgical procedure and assists when indicated. 7.Performs surgical scrub per hospital procedure after removing all jewelry and nail polish. Artificial tips or overlays are prohibited. 8.Prepares drapes, instruments and sutures on sterile field for efficient delivery of surgical procedure under strict aseptic technique. 9.Visually inspects all instrumentation and operative scopes for proper cleanliness, functioning and visualization prior to commencement of procedure. Any unusual findings shall be reported to the circulating nurse for corrective action. 10.Performs initial, relief and closing counts with the circulating nurse-providing visualization of all items counted as per hospital policy. 11.Verifies operative site with circulating room nurse. 12.Assists in the gowning and gloving of the surgical team and draping of the sterile field. 13.Responsible for maintaining the integrity, safety and efficiency of the sterile field by maintaining constant visualization of the operative field. 14.Responsible for immediately reporting any breaks aseptic technique and or complications to the circulating nurse so corrective action can be implemented. 15.Limits conversation at the operative field to promote a high level of infection control during procedure. 16.Responsible for the labeling, mixing and dispensing of all medications/contrast media under the direct supervision of the circulating nurse on a sterile field as indicated by the attending physician. 17.May assist in the cutting of surgical sutures and/or hold Adson forceps during skin stapling upon closure of the operative site under the direct supervision of the attending physician. 18.May irrigate the operative site under the direct supervision of the attending physician. 19.May suction blood and or fluids to provide adequate visualization of the operative field under the direct supervision of the attending physician. 20.May suction smoke from artery or laser above the operative field under the direct supervision of the attending physician. 21.May support an extremity to improve visualization of the surgical site under the direct supervision of the attending physician. 22.May hold retractors after placement by the attending physician. 23.Secures all specimens retrieved during operative procedure, notifies the circulating nurse of the identity of the specimen given by the attending surgeon. 24.Continuously cleans surgical instrumentation of gross debris throughout the surgical procedure to assist in proper decontamination postoperatively. 25.Responsible for packing all instruments in there intended container according to hospital policy and procedure. Any broken or damaged instruments must be brought to central/sterile for decontamination and delivered to the instrument manager for repair. 26.Assists circulating nurse in cleaning room assuring that all trash and line is disposed of properly in the appropriate container. No trash or linen is to remain on the floor or Operating Room table. 27.Disassembles suction canisters for proper disposal by environmental. 28.Verifies the correct labeling and number of surgical specimens with the circulating nurse. 29.Remains in room after operative procedure is completed, assists in transfer of patient to stretcher or bed using proper body mechanics. 30.If surgical procedure is completed and patient is on hold for a space in PACU the scrub technician may leave the operating room suite to assemble the next case set up and equipment, provided the anesthesiologist and circulating nurse remain with the patient. 31.Transports instrumentation and specimens to soiled utility room. All must be contained/covered during transport. Instruments shall be placed inside transport cart. Instruments that will be utilized for a subsequent procedure must be delivered directly to central sterile for immediate decontamination. 32.Specimens must be recorded in log for pathology or bacteriology. If indicated, Formalin should be placed in jar as per policy with specimen. Said jar shall be labeled with patient’s name and source of specimen, biohazard/formalin label applied, and placed in biohazard bag after assuring lids are secure so that leakage does not occur. Specimen slip shall be in place. 33.Understands and demonstrates the importance of efficiency and time management. 34.Identifies and demonstrates cost containment on each procedure. SUPPLEMENTAL DUTIES AND RESPONSIBILITIES: 1.Under direct supervision of R.N., identifies psychosocial needs of patient 2.Under direct supervision of R.N., interacts with patient using knowledge of psychosocial and emotional needs of patient. 3.Under direct supervision of R.N., positions patient for the surgical procedure utilizing knowledge of special needs based on age of patient. 4.Under direct supervision of R.N., prepares room environment to meet needs of patient. \n Job Qualification \n \n EDUCATION: High School Diploma or equivalent. Knowledge of instrumentation/supplies. Graduate of an accredited operating room technology program. CERTIFICATION: NATIONAL APPROVED CERTIFICATION SUGICAL TECHNICIAN. WORK EXPERIENCE: Previous experience in a clinical/medical related position, e.g. Sr. PCA, medical assistant or position utilizing medical terminology. \n *Additional Salary Detail The salary range and/or hourly rate listed is a good faith determination of potential base compensation that may be offered to a successful applicant for this position at the time of this job advertisement and may be modified in the future.When determining a team member's base salary and/or rate, several factors may be considered as applicable (e.g., location, specialty, service line, years of relevant experience, education, credentials, negotiated contracts, budget and internal equity).

\n Job Description \n The primary objective of this job is to improve quality, treat and support patients and family members in a caring professional manner and fulfill the hospital’s mission to serve our patients and their families by. \n Job Responsibility \n 1.Responsible for the smooth functioning of activities during the surgical procedure. This person is garbed in sterile attire and must remain within the sterile field. 2.Knowledgeable of the proposed surgical procedure anticipates the surgeons needs and efficiently carries out instructions by the surgeon, anesthesiologist and circulating nurse. 3.Assists the circulating nurse in the assembly and preparation of all supplies, instruments and equipment required for proposed surgical procedure utilizing physician resource map as a tool. 4.Assists the circulating nurse in the proper opening of sterile supplies onto the sterile field. In this function, the OR technician should be mindful and caution should be taken to avoid the opening of supplies which may be unnecessary for the procedure. 5.Checks order and tidiness and proper functioning of suction, lighting and equipment. 6.Is knowledgeable in the positioning of patients for surgical procedure and assists when indicated. 7.Performs surgical scrub per hospital procedure after removing all jewelry and nail polish. Artificial tips or overlays are prohibited. 8.Prepares drapes, instruments and sutures on sterile field for efficient delivery of surgical procedure under strict aseptic technique. 9.Visually inspects all instrumentation and operative scopes for proper cleanliness, functioning and visualization prior to commencement of procedure. Any unusual findings shall be reported to the circulating nurse for corrective action. 10.Performs initial, relief and closing counts with the circulating nurse-providing visualization of all items counted as per hospital policy. 11.Verifies operative site with circulating room nurse. 12.Assists in the gowning and gloving of the surgical team and draping of the sterile field. 13.Responsible for maintaining the integrity, safety and efficiency of the sterile field by maintaining constant visualization of the operative field. 14.Responsible for immediately reporting any breaks aseptic technique and or complications to the circulating nurse so corrective action can be implemented. 15.Limits conversation at the operative field to promote a high level of infection control during procedure. 16.Responsible for the labeling, mixing and dispensing of all medications/contrast media under the direct supervision of the circulating nurse on a sterile field as indicated by the attending physician. 17.May assist in the cutting of surgical sutures and/or hold Adson forceps during skin stapling upon closure of the operative site under the direct supervision of the attending physician. 18.May irrigate the operative site under the direct supervision of the attending physician. 19.May suction blood and or fluids to provide adequate visualization of the operative field under the direct supervision of the attending physician. 20.May suction smoke from artery or laser above the operative field under the direct supervision of the attending physician. 21.May support an extremity to improve visualization of the surgical site under the direct supervision of the attending physician. 22.May hold retractors after placement by the attending physician. 23.Secures all specimens retrieved during operative procedure, notifies the circulating nurse of the identity of the specimen given by the attending surgeon. 24.Continuously cleans surgical instrumentation of gross debris throughout the surgical procedure to assist in proper decontamination postoperatively. 25.Responsible for packing all instruments in there intended container according to hospital policy and procedure. Any broken or damaged instruments must be brought to central/sterile for decontamination and delivered to the instrument manager for repair. 26.Assists circulating nurse in cleaning room assuring that all trash and line is disposed of properly in the appropriate container. No trash or linen is to remain on the floor or Operating Room table. 27.Disassembles suction canisters for proper disposal by environmental. 28.Verifies the correct labeling and number of surgical specimens with the circulating nurse. 29.Remains in room after operative procedure is completed, assists in transfer of patient to stretcher or bed using proper body mechanics. 30.If surgical procedure is completed and patient is on hold for a space in PACU the scrub technician may leave the operating room suite to assemble the next case set up and equipment, provided the anesthesiologist and circulating nurse remain with the patient. 31.Transports instrumentation and specimens to soiled utility room. All must be contained/covered during transport. Instruments shall be placed inside transport cart. Instruments that will be utilized for a subsequent procedure must be delivered directly to central sterile for immediate decontamination. 32.Specimens must be recorded in log for pathology or bacteriology. If indicated, Formalin should be placed in jar as per policy with specimen. Said jar shall be labeled with patient’s name and source of specimen, biohazard/formalin label applied, and placed in biohazard bag after assuring lids are secure so that leakage does not occur. Specimen slip shall be in place. 33.Understands and demonstrates the importance of efficiency and time management. 34.Identifies and demonstrates cost containment on each procedure. SUPPLEMENTAL DUTIES AND RESPONSIBILITIES: 1.Under direct supervision of R.N., identifies psychosocial needs of patient 2.Under direct supervision of R.N., interacts with patient using knowledge of psychosocial and emotional needs of patient. 3.Under direct supervision of R.N., positions patient for the surgical procedure utilizing knowledge of special needs based on age of patient. 4.Under direct supervision of R.N., prepares room environment to meet needs of patient. \n Job Qualification \n EDUCATION: High School Diploma or equivalent. Knowledge of instrumentation/supplies. Graduate of an accredited operating room technology program. CERTIFICATION: NATIONAL APPROVED CERTIFICATION SUGICAL TECHNICIAN. WORK EXPERIENCE: Previous experience in a clinical/medical related position, e.g. Sr. PCA, medical assistant or position utilizing medical terminology \n *Additional Salary Detail The salary range and/or hourly rate listed is a good faith determination of potential base compensation that may be offered to a successful applicant for this position at the time of this job advertisement and may be modified in the future.When determining a team member's base salary and/or rate, several factors may be considered as applicable (e.g., location, specialty, service line, years of relevant experience, education, credentials, negotiated contracts, budget and internal equity).

How you'll help us Keep Climbing (overview & key responsibilities) At Delta Air Lines, connection is at the heart of everything we do and guides our every action. We strive to welcome and care for all of our customers during their travels with us and aim to deliver an elevated experience. As a Ground Maintenance Mechanic (GMM) in a stationary role, you will be a part of Delta’s Ground Support Equipment team. The GMM (Stationary) is responsible for the maintenance of stabilized stationary machinery and equipment. Your key maintenance functions include inspections, minor troubleshooting, repairing, removing, and replacing components, cleaning, and assembly. This opportunity requires a minimum of 6 months of experience in an industrial powered mechanical environment and an understanding of mechanical, electrical, hydraulic, and pneumatic disciplines as they apply to industrial powered systems. If you have experience as a semi-skilled industrial maintenance mechanic, then this role is right for you. You will perform all routine and non-routine maintenance on the following while reporting any issues to GSE Supervision: • Passenger loading bridges (interior, exterior, console, and dock lights) and interior and exterior painting (including bulb and lens replacement)., • Air handler hoses, adapters, air filters, condensate pans, and indicator bulbs and lenses., • Gear boxes, bearings and shafts, roller replacements, belt re-lacing, and belts replacements., • Staff’s baggage handling system (BHS) control rooms as well as reconciling bag jams to keep BHS flowing., • Ground power cables and associated clamping/saddles., • Stationary equipment like water cabinets, loading bridges, air handling systems, baggage conveyor systems, and 400 Hz gate power. Eligible Delta employees based in New York City (JFK or LGA) can be reimbursed up to $250 per month for specific transportation expenses incurred while traveling to and from work. Employees using public transit, including trains, buses, subways, ferries or van pools to get to and from JFK or LGA may be eligible. Delta Air Lines will never ask candidates for money throughout our recruitment process, including for any pre-employment screenings. All email communications with Delta’s recruitment team will come from a Delta email domain. If you have any questions about the legitimacy of an outreach from Delta’s recruitment team, you can contact . Internal Movement Eligibility Internal Employees: Before applying for this position, please reference the company's Internal Mobility Policy and Residency Policy to ensure you meet all eligibility requirements. You must be in good standing, which includes meeting performance standards and tenure requirements in your current role. For more information, visit the HR portal or contact your manager or HR representative. Compliance with these policies is mandatory for consideration. What you need to succeed (minimum qualifications) • Consistently prioritizes safety and security of self, others, and personal data., • Embrace diverse people, thinking, and styles., • Possesses a high school diploma, GED, or high school equivalency., • Is at least 18 years of age and has authorization to work in the United States., • Must have a valid driver's license., • Must be proficient in English., • Ability to lift items weighing between 50 and 70 pounds., • Be willing to work a fixed and/or rotating schedule including afternoons, evenings, weekends, and holidays., • Ability to read, comprehend, and apply information found in technical documents, manuals, and schematics., • Strong communication while working as a team and coordinating repairs with other Delta personnel and outside vendors., • Respond to customers' needs with minimum direction and perform repairs in time-sensitive situations., • Competitive salary, industry-leading profit sharing program, and performance incentives., • 401(k) with generous company contributions up to 9%., • New hires are eligible for up to 2-weeks of vacation. This is earned for use in the following vacation year (April 1 – March 31)., • In addition to vacation, new hires are eligible for up to 56 hours of paid personal time within a 12-month period., • LGA/JFK employees may be reimbursed up to $250/month for specific transportation expenses through the NYC Transit Reimbursement Program., • 10 paid holidays per calendar year., • Birthing parents are eligible for 12-weeks of paid maternity/parental leave., • Non-birthing parents are eligible for 2-weeks of paid parental leave., • Comprehensive health benefits including medical, dental, vision, short/long term disability and life insurance benefits., • Family care assistance through fertility support, surrogacy and adoption assistance, lactation support, subsidized back-up care, and programs that help with loved ones in all stages., • Holistic Wellbeing programs to support physical, emotional, social, and financial health, including access to an employee assistance program offering support for you and anyone in your household, free financial coaching, and extensive resources supporting mental health., • Domestic and International space-available flight privileges for employees and eligible family members., • Career development programs to achieve your long-term career goals., • World-wide partnerships to engage in community service and innovative goals created to focus on sustainability and reducing our carbon footprint., • Business Resource Groups created to connect employees with common interests to promote inclusion, provide perspective and help implement strategies., • Recognition rewards and awards through the platform Unstoppable Together., • Access to over 500 discounts, specialty savings and voluntary benefits through Deltaperks such as car and hotel rentals and auto, home, and pet insurance, legal services, and childcare.

How you'll help us Keep Climbing (overview & key responsibilities) At Delta Air Lines, connection is at the heart of everything we do and guides our every action. We strive to welcome and care for all of our customers during their travels with us and aim to deliver an elevated experience. As a Ground Maintenance Mechanic (GMM) in a stationary role, you will be a part of Delta’s Ground Support Equipment team. The GMM (Stationary) is responsible for the maintenance of stabilized stationary machinery and equipment. Your key maintenance functions include inspections, minor troubleshooting, repairing, removing, and replacing components, cleaning, and assembly. This opportunity requires a minimum of 6 months of experience in an industrial powered mechanical environment and an understanding of mechanical, electrical, hydraulic, and pneumatic disciplines as they apply to industrial powered systems. If you have experience as a semi-skilled industrial maintenance mechanic, then this role is right for you. You will perform all routine and non-routine maintenance on the following while reporting any issues to GSE Supervision: • Passenger loading bridges (interior, exterior, console, and dock lights) and interior and exterior painting (including bulb and lens replacement)., • Air handler hoses, adapters, air filters, condensate pans, and indicator bulbs and lenses., • Gear boxes, bearings and shafts, roller replacements, belt re-lacing, and belts replacements., • Staff’s baggage handling system (BHS) control rooms as well as reconciling bag jams to keep BHS flowing., • Ground power cables and associated clamping/saddles., • Stationary equipment like water cabinets, loading bridges, air handling systems, baggage conveyor systems, and 400 Hz gate power. Internal Movement Eligibility Internal Employees: Before applying for this position, please reference the company's Internal Mobility Policy and Residency Policy to ensure you meet all eligibility requirements. You must be in good standing, which includes meeting performance standards and tenure requirements in your current role. For more information, visit the HR portal or contact your manager or HR representative. Compliance with these policies is mandatory for consideration. What you need to succeed (minimum qualifications) • Consistently prioritizes safety and security of self, others, and personal data., • Embrace diverse people, thinking, and styles., • Possesses a high school diploma, GED, or high school equivalency., • Is at least 18 years of age and has authorization to work in the United States., • Must have a valid driver's license., • Must be proficient in English., • Ability to lift items weighing between 50 and 70 pounds., • Be willing to work a fixed and/or rotating schedule including afternoons, evenings, weekends, and holidays., • Ability to read, comprehend, and apply information found in technical documents, manuals, and schematics., • Strong communication while working as a team and coordinating repairs with other Delta personnel and outside vendors., • Respond to customers' needs with minimum direction and perform repairs in time-sensitive situations., • Competitive salary, industry-leading profit sharing program, and performance incentives., • 401(k) with generous company contributions up to 9%., • New hires are eligible for up to 2-weeks of vacation. This is earned for use in the following vacation year (April 1 – March 31)., • In addition to vacation, new hires are eligible for up to 56 hours of paid personal time within a 12-month period., • LGA/JFK employees may be reimbursed up to $250/month for specific transportation expenses through the NYC Transit Reimbursement Program., • 10 paid holidays per calendar year., • Birthing parents are eligible for 12-weeks of paid maternity/parental leave., • Non-birthing parents are eligible for 2-weeks of paid parental leave., • Comprehensive health benefits including medical, dental, vision, short/long term disability and life insurance benefits., • Family care assistance through fertility support, surrogacy and adoption assistance, lactation support, subsidized back-up care, and programs that help with loved ones in all stages., • Holistic Wellbeing programs to support physical, emotional, social, and financial health, including access to an employee assistance program offering support for you and anyone in your household, free financial coaching, and extensive resources supporting mental health., • Domestic and International space-available flight privileges for employees and eligible family members., • Career development programs to achieve your long-term career goals., • World-wide partnerships to engage in community service and innovative goals created to focus on sustainability and reducing our carbon footprint., • Business Resource Groups created to connect employees with common interests to promote inclusion, provide perspective and help implement strategies., • Recognition rewards and awards through the platform Unstoppable Together., • Access to over 500 discounts, specialty savings and voluntary benefits through Deltaperks such as car and hotel rentals and auto, home, and pet insurance, legal services, and childcare.

PhysioRX, a PT-owned, unique hybrid Physical Therapy and Fitness company, is looking for a Physical Therapist to join our team! We're a fitness forward practice that delivers a unique combination of healthcare and fitness. The ideal candidate is ready and willing to act as more than just their client's physical therapist - you have the skills to get them out of pain, but also program like a trainer and act as their coach. Our mission is to change the public perception of Physical Therapy AND create great jobs for PTs who know they have more to offer. And we're looking for a passionate PT who can coach a deadlift, explain pain science, and wrote both rehab and fitness programming. Read below for more information, and if you feel you're a good fit, follow instructions on how to apply. Some quick facts about us and how we practice: • No heat, no ice, no e-stim, no gimmicks, • Sessions are 1-1 for an hour, • 100% "cash based" - no insurance requirements telling us how to practice, • All clients receive rehab and fitness programming through our app If this sounds like you, keep reading… Your a Physical Therapist who loves working with motivated, active clientele. You believe that a PT clinic should look more like a gym rather than a sterile "medical" setting? You're fed up with the "insurance mill' or "assembly line" type of practices around us. You have a skillset that ranges from pain science education and diagnostics to coaching a deadlift and creating workout programs. You want to help build something special and take the PT profession to the next level About us: The PhysioRX approach blends physical therapy and fitness. Clients range on the spectrum from post-op ACL, to nagging gym injuries, to having no injuries at all and looking for an evidence-informed approach to health and fitness. Clients get both rehab and fitness programming. We provide health and fitness services through a unique hybrid model - combining remote customized exercise programming through our PhysioRX App with one-on-one 60 minute sessions in one of our two locations (NYC and Brooklyn). Our clients include barbell athletes, runners, cyclists, competitive athletes, weekend warriors, and busy people who just want to stay healthy and active. We're a fitness forward practice that delivers a unique combination of healthcare and fitness. Most companies promise mentorship and growth but don't mean it... The personal and professional development of our team is very important to us. You'll be working with a team of clinicians and coaches who hold certifications such as OCS, SCS, CSCS, Powerlifting Coaching, Run Coaching, and more. We meet as a team every Monday to discuss cases and present on topics. All new team members receive twice per week meetings to work on clinical decision making and programming. You will also have 1-1 meetings with a designated mentor throughout your first year with us. We are also one of the first companies to become Certified Clinical Athlete Providers and pay for all team members to go through their mentorship. We’re looking for outstanding PTs to join us in our Manhattan and Brooklyn locations. If you're interested, apply through this ad and then email us at the company email with a brief introduction.

Job Description: As Saab, Inc. is growing in East Syracuse, NY, we are seeking a Senior Quality Inspector, In-Process Inspection to: \n • Authorize assembly process completion and support the build team with in-process inspections during the build process.\n, • Validate visually and dimensionally that the product meets requirements compared to engineering drawings.\n, • Inspect for defects in surfaces, fasteners, sealant, paint, and testing.\n, • Compile technical data and reports to provide feedback on final inspection results and recommended corrective actions.\n, • Develop deviation reports and represent quality at the Material Review Board.\n, • Be responsible for non-conforming material processes and procedures.\n, • Deliver high level of workmanship in inspection processes for structural assembly and system installations.\n, • Experienced in quality management systems and become a subject matter expert in the company management system.\n, • Participate in tooling validation and application to meet product requirements in quality and efficiencies.\n, • Develop standardization for working procedures for high repeatability.\n\n Compensation Range: $28.08-$33.70 per hour The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: \n • High school degree or equivalent required.\n, • Technical degree or certification in the field of electro/mechanical assembly, mechanics, or maintenance is preferred.\n, • 5+ years of qualified inspection experience in defense manufacturing.\n, • Experience with ISO/AS9100 and highly standardized processes.\n, • Strong communication skills and ability to work as a team.\n, • Proficiency interpreting engineering drawings and specifications in written and digital format required.\n, • Ability to execute the appropriate working methods and select the right tools to meet the right level of quality and efficiency.\n, • Ability to work with standardized procedures for high repeatability in a highly advanced and connected environment.\n, • Excellent communication and team working skills.\n\n Physical Requirements: \n • Must be self-mobile and able to stand for extended periods.\n, • Ability to perform physical tasks such as sitting, bending, stooping, walking, climbing, reaching during a normal workday.\n, • Ability to perform repetitive motions (such as lifting or assembly of parts) including the use of hand held power tools.\n, • Ability to lift up to fifty (50) pounds.\n, • Hearing and vision within normal ranges is important for conversations, and to receive ordinary information and directives from Production Supervisors and management as required.\n, • Ability to work extended hours when required.\n\n Citizenship Requirements: Must be a U.S. citizen, Permanent Resident (green card holder), or protected individual as defined by 8 U.S.C. 1324b(a)(3). Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: \n • Medical, vision, and dental insurance for employees and dependents\n, • Generous paid time off, including 8 designated holidays\n, • 401(k) with employer contributions\n, • Tuition assistance and student loan assistance\n, • Wellness and employee assistance resources\n, • Employee stock purchase opportunities\n, • Short-term and long-term disability coverage\n\n About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Job DescriptionA World-Changing Company Palantir builds the world’s leading software for data-driven decisions and operations. By bringing the right data to the people who need it, our platforms empower our partners to develop lifesaving drugs, forecast supply chain disruptions, locate missing children, and more. The Role Software Engineers at Palantir build software at scale to transform how organizations around the world use data. In this role, you’ll have an opportunity to grow more quickly than you ever envisioned as you contribute high-quality code directly to Palantir Gotham, Palantir Apollo, or Palantir Foundry: products that are deployed at some of the most important institutions across the public and private sectors. You'll create features used by research scientists, aerospace engineers, intelligence analysts, and economic forecasters in countries around the world. Palantir's Product Development organization is made up of small teams of Software Engineers, each focusing on a specific aspect of a product. For example, you might join a team that builds a Foundry front-end application, or a component of the Gotham release infrastructure. We encourage communication and collaboration among teams to share context, skills, and experience, so you'll also have the opportunity to learn about other business areas. Core Responsibilities As a Software Engineer, you are involved throughout the product lifecycle - from idea generation, design, and prototyping, to execution and shipping, all while also being paired with a mentor dedicated to your growth and success. You'll collaborate closely with technical and non-technical counterparts to understand our customers' problems and build products that tackle them. One of the most effective ways to understand what our users need is to meet them. You may receive an opportunity to tour the assembly line at an auto-manufacturer or join a counter-terror analyst at their desk to really understand their mission and difficulties. SWE principles include: • Ownership: We see projects through from beginning to end in spite of obstacles we may encounter.• Collaboration: We work internally with people from a variety of backgrounds — such as other Software Engineers, Product Managers, Designers and Product Reliability Engineers. We also partner with our business development teams (Forward Deployed Engineers, Deployment Strategists) in order to understand and solve our customers' problems.• Trust: We trust each other to effectively handle time and priorities, and don't micromanage. We want people to have the space to think for themselves, while feeling supported by their team. Technologies We Use It doesn’t matter what languages you know when you join us; what matters is that you can write clean, effective code and learn new languages quickly. Our software is constantly evolving, so we need engineers who can do the same. Alongside peers that bring diverse experience - whether you’re a former university Teaching Assistant, switched to computer science recently, or are a hackathon enthusiast — you'll build your skills to apply the best technology to solve a given problem. Right now, we use: • A variety of languages, including Java and Go for backend and Typescript for frontend• Open-source technologies like Cassandra, Spark, Elasticsearch, React, and Redux• Industry-standard build tooling, including Gradle and GitHubWhat We Value • Ability to communicate and collaborate with a variety of individuals, including engineers, users and non-technical team members., • Willingness to learn and make decisions independently, and the ability to ask questions effectively., • Active US Security clearance, or eligibility and willingness to obtain a US Security clearance.What We Require, • Engineering background in fields such as Computer Science, Mathematics, Software Engineering, and Physics., • Familiarity with data structures, storage systems, cloud infrastructure, front-end frameworks, and other technical tools., • Experience coding in programming languages, such as Java, C++, Python, JavaScript, or similar languages.To apply, please submit the following:, • An updated resume / CV - please do so in PDF format.

Job DescriptionA World-Changing Company Palantir builds the world’s leading software for data-driven decisions and operations. By bringing the right data to the people who need it, our platforms empower our partners to develop lifesaving drugs, forecast supply chain disruptions, locate missing children, and more. The Role Software Engineers at Palantir build software at scale to transform how organizations around the world use data. In this role, you’ll have an opportunity to grow more quickly than you ever envisioned as you contribute high-quality code directly to Palantir Gotham: products that are deployed at some of the most important institutions across the government, defense and non-profit sectors. You'll create features used by research scientists, aerospace engineers, intelligence analysts, and economic forecasters in countries around the world. Palantir's Product Development organization is made up of small teams of Software Engineers, each focusing on a specific aspect of a product. For example, you might join a team that builds geospatial mapping tools for mission critical operations, or a component of the Gotham release infrastructure. We encourage communication and collaboration among teams to share context, skills, and experience, so you'll also have the opportunity to learn about other business areas. Core Responsibilities As a Software Engineer, you are involved throughout the product lifecycle - from idea generation, design, and prototyping, to execution and shipping, all while also being paired with a mentor dedicated to your growth and success. You'll collaborate closely with technical and non-technical counterparts to understand our customers' problems and build products that tackle them. One of the most effective ways to understand what our users need is to meet them. You may receive an opportunity to tour the assembly line at an auto-manufacturer or join a counter-terror analyst at their desk to really understand their mission and difficulties. SWE principles include: • Ownership: We see projects through from beginning to end in spite of obstacles we may encounter.• Collaboration: We work internally with people from a variety of backgrounds — such as other Software Engineers, Product Managers, Designers and Product Reliability Engineers. We also partner with our business development teams (Forward Deployed Engineers, Deployment Strategists) in order to understand and solve our customers' problems.• Trust: We trust each other to effectively handle time and priorities, and don't micromanage. We want people to have the space to think for themselves, while feeling supported by their team. Technologies We Use It doesn’t matter what languages you know when you join us; what matters is that you can write clean, effective code and learn new languages quickly. Our software is constantly evolving, so we need engineers who can do the same. Alongside peers that bring diverse experience - whether you’re a former university Teaching Assistant, switched to computer science recently, or are a hackathon enthusiast — you'll build your skills to apply the best technology to solve a given problem. Right now, we use: • A variety of languages, including Java and Go for backend and Typescript for frontend• Open-source technologies like Cassandra, Spark, Elasticsearch, React, and Redux• Industry-standard build tooling, including Gradle and GitHubWhat We Value • Ability to communicate and collaborate with a variety of individuals, including engineers, users and non-technical team members., • Willingness to learn and make decisions independently, and the ability to ask questions effectively.What We Require, • Active US Security clearance or eligibility and willingness to obtain a US Security clearance., • Engineering background in fields such as Computer Science, Mathematics, Software Engineering, and Physics., • Familiarity with data structures, storage systems, cloud infrastructure, front-end frameworks, and other technical tools., • Experience coding in programming languages, such as Java, C++, Python, JavaScript, or similar languages.To apply, please submit the following:, • An updated resume / CV - please do so in PDF format.

Job DescriptionCompany Description WHO WE ARE fresh is a global company headquartered in New York offering a full lifestyle line spanning skincare, lip care, bodycare, and fragrance in over a dozen countries. But we don’t just aspire to make the best products on the market; we want to be the best beauty brand to work for. We’ve created a warm, inspiring environment with world-class benefits that encourages our teams to dream big, because that’s how we got here. Here at fresh, we intentionally foster a spirit of belonging. We celebrate our diversity and support every employee to feel welcomed, valued, respected, and heard. By embracing curiosity and collaboration, we recognize that our differences strengthen us. Job Description MAIN JOB OBJECTIVE The Associate Manager, Packaging Development will support the company growth by developing and implementing innovative packaging for the Promo Category. This includes, but not limited to, development of set boxes, GWP and collateral items. Reporting to the Vice President, Product Innovation, the Associate Manager will work cross-functionally with many Global partners inclusive of Marketing, Product Development, Packaging Design and Operations. Additionally, the Associate Manager, Packaging Development will be a key contact with external packaging vendors, a critical element of the position. With an excitement for sustainable packaging, the Associate Manager, Packaging Development will have exceptional project management skills and constantly operate with a solution-oriented mindset. Qualifications JOB RESPONSIBILITIES • Execute the development and qualification of packaging solutions for Promo category that meet the needs for brand aesthetics, consumer use, manufacturing capability, quality and cost, and market requirements, • Support the conceptualization, initiation, development, validation and implementation of new and improved packages and processes including design generation, engineering specifications, mold qualification, functionality and quality testing, • Support operations cost savings and efficiency initiatives, and quality investigations towards continuous improvement, • Fully own technical milestones in project timelines, • Troubleshoot technical issues (supplier, plant, distribution, quality, etc.), • Share and escalate roadblocks cross-functionally, • Create package component specifications, pre-Bills-of-Materials and Fill & Assembly specifications and quality control elements, • Collaborate with Marketing and Design on establishing feasibility for new packaging initiatives/concepts, • Validate artwork based on mandatory technical elements and subsequently validate proof per released artwork, • Ensure colors of packaging components meet Design expectations and are within molding and decorating process constraints outlined by external suppliers, • Understand and conduct package testing procedures and standards to support the effective design, validation, and implementation of new packages and packaging technology, • Manage external vendors/supplier relations to review project status, elevate technical solutions, and build innovation, • Attend Set Assembly startups as needed to ensure proper execution of design & function, • Support and drive engineering change initiatives, • Gain full understanding of Fresh procedures and processes in Gifting, New Product Development and ECR's (Engineering Change Request), • Work closely with Packaging Development team, understanding key packaging deliverables for new launches, • Build relationships with cross functional fresh teams, internal LVMH partners, and external vendors, • Optimize current packaging development processes and finding creative solutions for packaging innovation, • Partner with preferred vendors, track current and future offerings related to sustainability, innovation, supplier constraints, and capabilities, • Present to partners on innovative and sustainable packaging, • BS/BA degree in Package Engineering/Technology/Science or related engineering field, • Minimum 3 years relevant experience in Packaging Development (preferred in Gifting), • Demonstrated broad and in-depth knowledge of packaging materials and processes, • Demonstrated success of excellent communication skills, both oral and written, with internal partners and external vendors, • Self-motivated and self-disciplined individual, able to work in relative autonomy, • Proficient PC skills - MS Office software and capable of building presentations on Excel and/or PowerPoint., • CAD literacy will be a plus Additional Information WHAT WE OFFER YOU Training & Development and Culture • Fresh and LVMH Sponsored Trainings and Workshops for Personal and Professional Development, • Opportunities for networking and building relationships with LVMH Community and Network, • Free professional consultation, referrals and counseling through the Employee Assistance Program (EAP), • Comprehensive paid time off inclusive of Floating Holidays and Summer Fridays, • Fertility Services, Maternity and Newborn Support, Adoption and Surrogacy Assistance, including cryopreservation when part of fertility treatment, • Paid Parental Leave (Inclusive of Maternity, Paternity, Adoption, Surrogacy) at eligibility, • Travel & lodging for those who can’t access care, • Fresh In-Store Discounts and Gratis, • LVMH Group Friends and Family Sales across all divisions within LVMH: Wines and Spirits, Watches and Jewelry, Perfumes and Cosmetics, Fashion and Leather Goods, etc., • Pre-Tax Commuter Benefits through Wage Works The salary range for this role is $80,000 - $105,000 USD. This role is based in Jersey City, New Jersey. All your information will be kept confidential according to EEO guidelines.

Job Description POSITION PURPOSE: Principal responsibilities are making deliveries and pickups to all construction projects. The driver will also be responsible for the assembly, loading and unloading of trucks and assisting the Warehouse Manager with any and all responsibilities of the warehouse. Will be training in preparation for the future warehouse manager role. Will assist the warehouse manager in the overall operations of the warehouse including all equipment, rental records and material ordering and coordination of deliveries to job sites. Responsibilities: • Primary responsibility of this position will be driving., • Secondary responsibility of this position is to assist and train with the warehouse manager in facilitating needed items on projects to help keep the projects running smoothly, • Receive equipment and materials lists from foreman and set up delivery, • Keep a stock of needed sundries and certain materials to limit trips to supply houses, • Some standard items ie: safety glasses, brushes, rags, etc. should be carried by truck driver at all times, • Shop for prices on equipment and materials, • Maintain truck maintenance needs, • Have equipment serviced on a regular basis, • Act as truck driver. Will coordinate schedules and deliveries with the Superintendent, • All truck driver orders should come directly from the Superintendent, • Oversee equipment and materials ordering. All equipment/materials should be ordered in advance so they will be available when needed, • Keep warehouse and yard clean at all times, • Bring forward new ideas, recommendations that provide cost savings to the Branch, • Research new equipment, • Keep a running list of warehouse materials available for use, • Keep track of equipment, • Maintain list of inventory within warehouse. Track inventory, • Manage hazardous materials and keep to a minimum Please Note: This is a temporary full-time position. There is a possibility that it could become permanent, however, at this time it is slated to go through December 2025. Requirements • Valid Driver’s License, Class A preferred but Class B CDL required, • Knuckle boom driver/operator required, • High school diploma or equivalent, • Ability to work in a fast paced environment and manage multiple projects at one time, • Familiarity with Microsoft office applications, Outlook and Internet research a plus, • Good communication skills, • Demonstrated ability to manage warehouse operations for multiple branches is a plus, • OSHA 10 hour a plus, • HAZMAT certification or be willing to get certified, • Must have or be able to get Certification of Fitness Card, • Must be willing to work flexible hours, • 5-10 years commercial driving experience is a plus, • Ability to operate a boom truck and have appropriate certification is a plus, • Compensation Bonus Opportunity, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Short Term & Long Term Disability, • Family Leave (Maternity)

Job DescriptionJobsRUs.com formerly CorTech is a service-oriented staffing/recruiting company dedicated to working closely with our clients. We are currently hiring for a Temporary Leasing Assistant in Elizabeth, NJ. $23.00/hour Temporary assignment * Responsibilities will include providing organizational overflow support for this fast-paced management office and providing excellent customer service to residents, visitors, contractors, and co-workers. Other duties will include, but not be limited to, answering phones, greeting incoming visitors, processing incoming/outgoing mail, preparing office correspondence and completion of forms, maintaining files, and ordering and maintaining inventory of office supplies. Office Assistant Job Duties: • Minimum 1 to 3 years prior multi-housing property experience preferred., • Knowledge of affordable housing industry compliance software program(s) required for processing state, federal applications., • Experience with Section 8 is preferred, • Demonstrated time management and multi-tasking skills to meet required deadlines., • Excellent customer service skills to assist internal and external customers., • Strong MS Office skills (Word, Excel, Outlook); accurate data entry and proofreading skills., • Prior Yardi Voyager experience with affordable housing modules preferred; OR other housing compliance software skills with willingness to quickly learn Yardi., • Basic Accounting skills with understanding of receivables, payables, and ability to assess incomes in relation to compliance regulations. JobsRUs.com Cares: *Pay Options: Direct Deposit, Paper Checks or pay cards; paid weekly *Health/Dental/Vision Insurance options compliant with the ACA *401k *Online Employee Portal to adjust withholdings and view and print pay stubs We look forward to working with you; JobsRUs.com Cares! APPLY Today! JobsRUs.com has over 8000+ associates in the United States in various verticals and industries with over 5000+ working in manufacturing, industrial, production, factory, distribution, and/or warehouse roles ranging from the assembly, forklift, machine operator, warehouse, maintenance, packaging, order pick/pack and general labor.Company DescriptionJoin the team of a global leading medical device and pharmaceutical manufacturer! Excellent opportunity for growth.Join the team of a global leading medical device and pharmaceutical manufacturer! Excellent opportunity for growth.

Job DescriptionJobsRUs.com formerly CorTech is a service-oriented staffing/recruiting company dedicated to working closely with our clients. We are currently hiring for a Temporary Leasing Assistant in Elizabeth, NJ. $23.00/hour Temporary assignment * Responsibilities will include providing organizational overflow support for this fast-paced management office and providing excellent customer service to residents, visitors, contractors, and co-workers. Other duties will include, but not be limited to, answering phones, greeting incoming visitors, processing incoming/outgoing mail, preparing office correspondence and completion of forms, maintaining files, and ordering and maintaining inventory of office supplies. Office Assistant Job Duties: • Minimum 1 to 3 years prior multi-housing property experience preferred., • Knowledge of affordable housing industry compliance software program(s) required for processing state, federal applications., • Experience with Section 8 is preferred, • Demonstrated time management and multi-tasking skills to meet required deadlines., • Excellent customer service skills to assist internal and external customers., • Strong MS Office skills (Word, Excel, Outlook); accurate data entry and proofreading skills., • Prior Yardi Voyager experience with affordable housing modules preferred; OR other housing compliance software skills with willingness to quickly learn Yardi., • Basic Accounting skills with understanding of receivables, payables, and ability to assess incomes in relation to compliance regulations. JobsRUs.com Cares: *Pay Options: Direct Deposit, Paper Checks or pay cards; paid weekly *Health/Dental/Vision Insurance options compliant with the ACA *401k *Online Employee Portal to adjust withholdings and view and print pay stubs We look forward to working with you; JobsRUs.com Cares! APPLY Today! JobsRUs.com has over 8000+ associates in the United States in various verticals and industries with over 5000+ working in manufacturing, industrial, production, factory, distribution, and/or warehouse roles ranging from the assembly, forklift, machine operator, warehouse, maintenance, packaging, order pick/pack and general labor.Company DescriptionJoin the team of a global leading medical device and pharmaceutical manufacturer! Excellent opportunity for growth.Join the team of a global leading medical device and pharmaceutical manufacturer! Excellent opportunity for growth.

Job DescriptionWe are currently looking for candidates for Traveling Technicians in NYC - local travel only!! Must be based in NYC area. Duties & Responsibilities Include: • Travels across assigned territory existing accounts., • Builds and maintains strong relationships with hospital administration, surgeons and other OR staff., • Maintains high standards for decontamination, inspection, assembly, inspecting, wrapping, and sterilization of surgical instruments, • Maintains all laparoscopic equipment and replace as needed, process repairs for instruments and scopes, • Maintains current preference cards for surgeons, • Maintains a professional level of service, behavior, and communication with Surgical Solutions team members, hospital, and OR staff, • Maintains CRCST Certification., • Completes/provides documentation required to obtain medical clearance from the hospital., • Completes annual trainings/competencies • Maintains organized records of medical/OHS credentialing requirements, • Sets the example at all sites with 100% adoption - daily usage of required hardware and daily login to SCMP at the temporary site to service all cases. Utilizes all digital best practices and share out what has worked well at other locations you have supported where teams may be struggling to merge the operational with digital flows. Qualifications: • CRCST certification required, • High school diploma/GED required; some college preferred, • 1-2 years working in Surgical Solutions or similar model, • Operating room experience highly preferred; Sterile processing experience required; Endoscopy experience preferred, • Outstanding customer service skills and ability to build strong rapport with hospital teams, • Ability to quickly and accurately anticipate needs, • Availability for 24/7 hospital coverage including weekday, weekend, and holiday rotational scheduled and on-call shifts, • Availability to travel locally in NYC as needed, up to 100% of the time.

Job Description Hydraulic Service Technician - Mechanical and Hydraulic Experience Required Rio Controls & Hydraulics is expanding in the locations listed below. RCH has a family type of environment where all members work together as a team to assist each other, grow the company, and support the challenges that lay ahead of us together. We have worked hard to build a team of good people. We are committed to providing our customers with the highest quality parts, service, solutions, support, and engineering. RCH is looking for long term team members who want to be an integral part of our growing business where each member has a direct contribution on the direction we take as a company. Tampa Bay, FL Staten Island, NY Houston, TX New Orleans, LA Responsibilities: Installation, maintenance and repair of hydraulic systems and components Read blueprints and diagrams while troubleshooting and diagnosing problem • Perform preventative maintenance to avoid operational failures of hydraulic systems, • Welding, metal fabrication and electrical assembly, • Provide drawing review and suggestions to investigate and repair of hydraulic equipment, • Disassemble and reassembly hydraulic components, • Operate drill press, lathe, grinders, or other machines to modify parts Qualifications: • Experience in fabrication and assembly/repair of hydraulic systems, • Ability to effectively read hydraulic schematics., • Experience with different hydraulic components, both service and troubleshooting, • Experience with replacing seals and repair of hydraulic cylinders, • Must be willing to work odd hours in a non - climate control and onboard towboats, tugboats, offshore supply vessel, 24-7-365 Full Compensation Package Available to include: • Competitive Salary, • Medical, Dental, • 401K, Paid Holiday

Job Description About Voyant Voyant Photonics, based in the heart of New York City, is transforming machine perception with a new class of LiDAR devices that are compact enough to fit in the palm of your hand and powerful enough to measure range, velocity, and reflectivity with unparalleled accuracy. By leveraging cutting-edge silicon photonic chips smaller than your fingertip, we deliver sensors that are not only revolutionary in performance but also affordable enough to integrate into any system. Our technology disrupts the status quo of bulky, expensive, and power-hungry LiDAR systems, making high-precision sensing accessible for widespread adoption in robotics, autonomous vehicles, drones, industrial automation, and beyond. Why Join us? At Voyant, you’ll be part of a team turning cutting-edge research into real-world products. As a growing startup, we offer interns the chance to make a meaningful impact, work closely with senior engineers, and learn what it takes to build disruptive sensing technology. This is more than an internship — it’s a chance to grow your technical skills and career in one of the most exciting fields of hardware innovation. The Role: We’re seeking an Industrial Engineering Intern to support our Manufacturing Operations team as we scale from prototypes to full-scale production. You’ll gain hands-on experience helping optimize processes, improve efficiency, and ensure smooth day-to-day operations in a fast-paced, high-tech manufacturing environment. Location: NYC Duration: 4 months Hours: 12+ hours per week Responsibilities: * Support the operations in transitioning Voyant’s operations from pre-production to full-scale production. * Assist in developing, documenting, and optimizing manufacturing and assembly processes. * Help create workflow layouts, standard operating procedures, and assembly instructions. * Conduct time studies, process mapping, and efficiency analysis to identify bottlenecks and recommend improvements. * Support inventory management, material flow, and supply chain tracking initiatives. * Collaborate with engineering, quality, and manufacturing teams to ensure manufacturability, testability, and cost targets are met. * Assist with data collection and analysis for production KPIs, continuous improvement initiatives, and process validation. * Support cross-functional projects, including vendor management, equipment setup, and pilot production activities. Qualifications * Pursuing a degree in Industrial, Manufacturing, Mechanical Engineering, or a related field. * Strong analytical skills and interest in manufacturing operations. * Detail-oriented, organized, and able to work collaboratively across teams. * Familiarity with Lean Manufacturing or process optimization is a plus. What We Offer * Team events and company meetups * Complimentary lunch provided daily at our NYC office * Hands-on experience in cutting-edge LiDAR hardware manufacturing. * Work directly with senior operations and engineering leaders. * Exposure to real-world manufacturing operations in a high-growth startup environment. * Potential to transition to full time position Equal Opportunity Employer Voyant Photonics is an equal opportunity employer committed to building a diverse and inclusive workplace. We welcome applicants from all backgrounds and do not discriminate based on race, color, religion, gender, gender identity or expression, sexual orientation, pregnancy, marital or partnership status, age, national origin, citizenship, veteran or military status, disability, medical condition, genetic information, caregiver status, or any other characteristic protected by law.

Job Description Salary: $95,000.00 to $105,000.00 Other Forms of Compensation: $1,000.00 Yearly Supervisor Bonus Potential Fire Safety Supervisor - Mount Sinai Hospital Crothall Healthcare is a Compass One Company that provides specialized, high-quality, innovative, and responsive support services exclusively to the healthcare industry. Crothall serves many of the Top 100 Hospitals throughout its over 1300 healthcare service teams in 46 states. Crothall has been recognized as one of Modern Healthcare’s Best Places to Work and Best Places to Work in Pennsylvania since 2013 and Becker's Top 150 Places to Work since 2016. A division of Compass Group USA, we have more than 26,000 team members. Our core services include: Environmental Services, Healthcare Technology Solutions, Patient Transportation, Laundry & Linen, Facilities Management, and Ambulatory EVS. Learn more at . Job Summary JOB SUMMARY: Oversees all fires safety department areas of responsibility under the direction of the Unit Director/Fire Safety Assistant Director. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Understand and implement Fire & Life Safety Policies, • Implement and manage Building Fire Safety Plans, • Perform ILSM assessment and document preparation, • Manage and implement hot works program, • Manage and review above ceiling permits, • Manage fire stopping program, • Manage and implement clear corridor program, • Participate in event walk-throughs to ensure life safety compliance, • Participate in Environment of Care rounds and required follow-up for corrective work, • Manage and review lab inspections and required follow-up for corrective work, • Maintain all documentation of programs of responsibility, • Perform necessary audits to ensure full compliance with joint commission standards and all governing agencies, • Customer service/interpersonal skills, • Problem-solving skills, • Analytical- computer skills, • Supervisory skills, • Financial acumen, • Presentation skills, • Team building and coaching skill EDUCATION/EXPERIENCE: Bachelor’s degree in related field preferred or a minimum of two (2) years of experience in field preferred. The following certifications are preferred to have by the date of hire or must meet all prerequisites and be able to obtain within 6 months of hire date: • F-89 Fire and Life Safety Director, • S-12 Sprinkler System Certificate of Fitness, • S-13 Standpipe System Certificate of Fitness, • S-95 FA System Certificate of Fitness, • W-07 Fire & Emergency Drill Certificate of Fitness – Citywide, • F-01 Citywide Fire Guard for Impairment Certificate of Fitness, • F-03 Indoor Place of Assembly Safety Personnel Certificate of Fitness, • F-04 Temporary Indoor/Outdoor Place of Assembly Safety Personnel Certificate of Fitness Apply to Crothall today! Crothall is a member of Compass Group USA Click here to Learn More about the Compass Story Associates at Crothall are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Flexible Time Off, • Holiday Time Off (varies by site/state), • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs), • Paid Parental Leave Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. We encourage applicants with a criminal history (and driving history) to apply. Applications are accepted on an ongoing basis. Crothall maintains a drug-free workplace. Req ID: 1482465 Crothall Healthcare Abigail Van Eman [[req_classification]]

Job Description Cresilon® is a Brooklyn-based biotechnology company that develops, manufactures, and markets hemostatic medical devices utilizing the company’s proprietary hydrogel technology. The company’s plant-based technology has revolutionized the current standard by stopping traumatic and surgical bleeds in seconds without the need for extended manual pressure. The company's current and future product lines target veterinary, human trauma, and human surgical applications. Cresilon's mission is to save lives. Learn more about the company at . The Production Technician I is responsible for the aseptic manufacturing of Cresilon’s products for the animal health industry. The Production Technician II will be trained in clean room operations, aseptic techniques, and must demonstrate the ability to successfully pass gowning qualifications. The position involves operating simple and complex processing equipment, routine sanitization of cleanroom facilities, and manual cleaning of equipment. The ideal candidate will have a proven track record of steady progress in a similar manufacturing environment and must possess a willingness to learn all equipment and jobs in the assigned manufacturing and sanitation of clean room facilities as required. Production Technicians are also responsible for the quality of products produced by ensuring compliance with local, State and Federal regulations, including current Good Manufacturing Practices (cGMP). • Perform line clearance of assigned production areas as required., • Perform equipment set up and disassembly activities., • Operate production, assembly and testing equipment, including heat sealers, bar code scanners, weighing scales, tumblers, autoclaves, filling equipment, and packaging equipment., • Formulate, fill, and pouch product in accordance with SOPs., • Troubleshoot all operating deviations and issues and coordinate with other functions when required., • Report both machine and operating deviations to area supervisor or designee., • Perform routine, preventative maintenance on equipment., • Perform cleaning and disinfection of the manufacturing spaces., • Perform cleaning and sterilization of manufacturing equipment., • Perform visual inspection of components and/or product in accordance with SOP’s and cGMP’s., • Perform sampling, intermediate, and finished goods packaging as per SOPs., • Package and ship raw materials for sterilization., • Perform material receiving, staging, material movements, and material replenishment as per SOPs., • Transport samples, materials, and equipment between multiple facilities., • Complete data entry and generate reports for material inventory movements., • Complete and maintain applicable logbooks and batch record paperwork as required and in accordance with GMP and GDP standards., • Maintain a clean production environment during shift., • Report all actual, near misses and potential accidents for further investigation., • Take immediate action to resolve any near miss situations., • Assist in investigation of all actual, near misses and potential accidents. Provide information to troubleshoot and take initiative to resolve operational issues independently., • Assist in project commissioning and validation activities, as necessary., • Prepare samples or prototypes as required for testing, or other evaluations, • Monitor the plant status and liaise with colleagues of other departments to ensure there is no interruption to manufacturing process., • Complete all required trainings: Read and Understand (TM1), Computer Based Training with Quiz (TM2), Instructor Led (TM3/TM4), and On-the-Job Trainings (TM5)., • Oversee training of junior employees on production processes as assigned., • Ensure proper communication and handling over of shift duties., • Support Environmental and Personnel Monitoring (EM/PM) activities as directed., • HS Diploma or Equivalent with 2+ years of relevant manufacturing experience in the pharmaceutical, biotechnology, or medical device industry OR 2 or 4 year degree with 0+ years of relevant experience., • Ability to read, understand, and execute written work instructions., • Ability to complete documentation accurately., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals, • Ability to become gowning qualified to work in a cleanroom environment., • Ability to problem solve and achieve business objectives., • Ability to adapt training approach., • Willingness to be flexible, and open minded to new processes or changes in direction., • Team oriented, building relationships with peers and managers in a proactive manner., • Excellent verbal and written communication skills., • Proficient in Microsoft Office (Word, Excel, Outlook)., • Paid Vacation, Sick, & Holidays, • Medical, Dental, and Vision Insurance, FSA: Dependent & Healthcare, Commuter & Parking Benefits, Long Term Disability Coverage, • Company Paid Life and Short-Term Disability Coverage, • Work/Life Employee Assistance Program, • 401(k) & Roth Retirement Savings Plan with company match up to 5%, • Monthly MetroCard Reimbursement This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. Cresilon makes hiring decisions based solely on qualifications, merit, and business needs at the time.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: Thea Energy is seeking highly skilled and motivated technicians to join our rapidly growing team. The Engineering Technician will be at the forefront of bringing our innovative designs to life. You will be responsible for hands-on fabrication, assembly, and testing of critical hardware including superconducting magnets, high vacuum and cryogenic equipment, electromechanical systems, and other associated hardware. You will be expected to work with a high degree of autonomy, troubleshoot complex problems, and contribute to the continuous improvement of our processes. If you are passionate about building cutting-edge technology and thrive in a fast-paced environment, we want to hear from you. Key Responsibility Areas: • Build, operate, maintain, and troubleshoot complex mechanical and electrical systems, • Assist in developing new equipment, tools, procedures, and inspection techniques to reduce production time while maintaining high quality, • Responsible for tool and workspace organization and maintenance, • Assemble and troubleshoot test articles and supporting test equipment, • Collaborate to support development of manufacturing processes and tooling Required Experience & Skillsets:, • High-school diploma or equivalent, • 5+ years of experience in shop fabrication, manufacturing, research, or high-tech industry, • 5+ years of technical experience with any of the following:mechanical or electrical systems, high pressure or high vacuum systems, cryogenic systems, plumbing, soldering, system testing, power or controls systems, • Comfortable working to aggressive deadlines and exceptional work ethic, • Proficiency with Microsoft Office suite tools or similar software Ideal Experience:, • Knowledge of quality control and inspection procedures, • Experience operating, maintaining, or troubleshooting or programming automation equipment, e.g. PLC, HMI, or process controllers, • Experience with reflow solder processes, including PCBA manufacturing, • Crane or lifting experience, • Forklift experience, • Experience with electrical schematic and wiring, • Experience using various types of hand tools and precision measuring tools, • Experience in documenting, improving, and implementing process instructions, • Experience with reading and reviewing mechanical drawings, • Experience with machining, operating manual milling, saws, and other toolsCompany Benefits:, • Hourly rate $30-43/hr, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

Job Description • We have an opening for full time and part time CATERING ASSOCIATE positions., • Location: New York Presbyterian Hospital - 445 E 69th Street, 12th Floor K, New York, NY 10021 Note: online applications accepted only., • Schedule: Full time and part time schedules are available; open availability is preferred. Hours and days may vary. Must be able to work weekends and holidays. More details upon interview., • Requirement: Customer service experience required. Hospital experience is a plus., • Fixed Pay Rate: $18.50 per hour. We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1485753. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: This position is eligible for an Employee Referral Bonus! If you know someone that is qualified for this role, please use the ‘job search’ in PeopleHub to refer your referral and email them a link to apply. Your referral will be able to apply by clicking the link in the email. You can check the status through your profile, accessible via Careers in PeopleHub, by clicking on ‘referral tracking.’ For Employee Referral guidelines, FAQs and the Compass Employee Referral Policy, email . Become part of Restaurant Associates, the industry’s leading provider of dining and event catering for some of the nation's most prestigious museums, performing arts centers and corporations! Voted Glassdoor's Employee Choice Awards- Best Places to work This is R/A ! Job Summary Summary: Responsible for patient food service on assigned units (e.g., menu selections, tray assembly, tray delivery and pick-up, special requests and in-between food delivery). Essential Duties and Responsibilities: • Communicates with nursing departments, clinical dieticians and other personnel to provide excellent patient services., • Introduces the "Catering to You" program following scripted methods to new patients., • Takes patient menu selections prior to meals and offers alternatives to menu as allowed on prescribed diet in accordance with food allergies and sensitivities, cultural, ethnic and religious preferences., • Assembles trays according to patient menu on tray ticket and retrieves trays from patients' rooms., • Complies with regulator agency standards, including federal, state and JCAHO., • Adheres to facility confidentiality and patient's rights policy as outlined in the facility's HIPPA policies and procedures., • Follows Hazard Analysis Critical Control Point (HACCP) guidelines when handling food, cleaning work stations and breaking down patient tray line., • Follows facility and department infection control policies and procedures. Both full-time and part-time positions offer the following benefits to associates: • Retirement Plan, • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Medical, • Dental, • Vision, • Life Insurance/AD, • Disability Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs) Abides by all Company policies and procedures including but not limited to: • The use of a medium weight cut gloves when handling or using knives, peelers, choppers, mandolins or cleaning a slicer., • The use of oven mitts, fryer gloves or steamer gloves when handling hot pans from ovens, warmers or steamtables., • The use of slip-resistant shoes and proper lifting techniques. Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act.

Job Description Entry Writer / Data Entry & PGA Specialist Location: Moonachie, NJ | Full-Time | ✈️ Logistics Are you detail-oriented, organized, and ready to take the next step in your logistics career? Join our team as an Entry Writer, where you’ll play a key role in ensuring smooth import operations, compliance with regulations, and outstanding service to our clients. What You’ll Do Responsibilities: • Review and organize import files to ensure all information and documentation is accurate and complete., • Communicate with Customer Service when additional documents or information are needed from clients., • Classify documentation based on operations system data and follow client-specific SOPs., • Support the Import Manager with classification and compliance needs., • Research and provide HTS or product codes when missing, ensuring accuracy for future use., • Input entry data and handle FDA (PGA) requirements, including “may proceed” releases., • Immediately notify clients when FDA exams are required (document or merchandise)., • Prepare and annotate delivery orders with FDA release status., • Issue written instructions to carriers/steamship lines when shipments must be held for release., • Ensure shipments are properly released once clearance is completed., • Pass completed files to Post-Entry team for final assembly., • Monitor releases by Customs, FDA, and other authorities, and resolve census or entry errors., • High School Diploma or GED required., • 3+ years of entry writing and/or brokerage operations experience (data entry & PGA focus)., • Experience with CargoWise One preferred; QuestaWeb a plus., • Strong knowledge of U.S. and international geography (countries, cities, ocean ports)., • Proficiency in Microsoft Outlook, Word, and Excel., • Ability to work independently while delivering top-quality customer service., • Excellent attention to detail, organization, and multitasking skills. We know our success depends on our people. That’s why we offer a competitive benefits package designed to support your health, well-being, and future: • Medical, Dental, and Vision Insurance, • Health Savings Account (HSA) – 100% employer-paid, plus $1,000 annual employer contribution, • Short-Term Disability Insurance – 85% of base pay, • Long-Term Disability Insurance – 60% of base pay, • Life Insurance & AD&D Coverage – $25,000 each, • 401(k) with Profit Sharing (annual contribution if eligible) We are more than just an international logistics provider—we are a proudly independent, innovative leader in supply chain solutions and global trade compliance. With a commitment to excellence, we offer exceptional opportunities for career advancement and personal development in both trade compliance and business development. Our mission is clear: to deliver the highest standard of customer service, competitive pricing, and value-added services that truly set us apart in the industry. What distinguishes us is not only what we do, but how we do it—with integrity, efficiency, and a forward-thinking approach that drives success for our clients and our team.About Our Company\r\n\r\nWe are more than just an international logistics provider—we are a proudly independent, innovative leader in supply chain solutions and global trade compliance.\r\n\r\nWith a commitment to excellence, we offer exceptional opportunities for career advancement and personal development in both trade compliance and business development. Our mission is clear: to deliver the highest standard of customer service, competitive pricing, and value-added services that truly set us apart in the industry.\r\n\r\nWhat distinguishes us is not only what we do, but how we do it—with integrity, efficiency, and a forward-thinking approach that drives success for our clients and our team.

Job Description Job description Box Truck Delivery HELPER SMS DELIVERY LLC Teterboro, NJ 07074 Part-time $16.50 Full Job Description SMS DELIVERY LLC is now hiring! We have immediate PERMANENT opportunities available for Driver Helpers. This position will be delivering a variety of "Home Goods" to mostly residential customers in teams of two people per truck from our customer's distribution facility in Teterboro, N.J. No assembly or installation required. Anybody with delivery experience is welcome to apply. No experience....no problem, we provide full hands-on training. !!! Paid Time Off !!! !!! Health Care Benefits !!! !!! Flexible Schedule !!! About the Position: • Employee Based Position, • Vehicle Size: 16' or 24' Box Truck, • Based on experience, primary driver duties or driver assistant duties, • Contact with Customers on Delivery Time, • Team deliveries 2 people per truck, • Must be available to work Monday-Sunday, • Must be available to work some Holidays, • Average shift is 8-10 hours, • Hourly rate $16.50, • Overtime Available, • Proof Of Identity and Authorization to work in the United States, • Must be at least 18 years old, • 4 Panel Drug Screen (we DO NOT check for marijuana) Schedule: • 10 hour shift, • 8 hour shift, • Day shift

Job DescriptionHydraulics Service Technician- $40-$50/HR Integrity Trade Services is hiring a Hydraulics Service Technician in Staten Island, NY. Must have Mechanical and Hydraulic Aptitude Required. Our customer is expanding and has a family type of environment where all members work together as a team to assist each other, grow the company, and support the challenges that lay ahead. They have worked hard to build a team of good people. They are committed to providing their customers with the highest quality parts, service, solutions, support, and engineering. Our customer is looking for long term team members who want to be an integral part of their growing business where each member has a direct contribution on the direction they take as a company. Hydraulics Service Technician Responsibilities: • Installation, maintenance and repair of hydraulic systems and components, • Read blueprints and diagrams while troubleshooting and diagnosing problems, • Perform preventative maintenance to avoid operational failures of hydraulic systems, • Welding, metal fabrication and electrical assembly, • Provide drawing review and suggestions to investigate and repair of hydraulic equipment, • Disassemble and reassembly hydraulic components Disassemble, repair and reassembly hydraulic cylinders Hydraulics Service Technician Qualifications: • Experience in fabrication and assembly/repair of hydraulic systems, • Ability to effectively read hydraulic schematics., • Experience with different hydraulic components, both service and troubleshooting, • Experience with replacing seals and repair of hydraulic cylinders, • Must be willing to work odd hours in a non - climate control and onboard towboats, tugboats, offshore supply vessel, 24-7-365 Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities Full Compensation Package Available to include: • Medical, Dental, Vision, 401K, Life Insurance, Paid Holidays and Vacations, • Company truck, Credit Card, Company phone, Gas Card and On-Call after probationary period #IND #ZR

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is looking for experienced, highly motivated mechanical engineers to join its rapidly growing team. Mechanical engineers will have ownership of the mechanical design and development of primary and secondary components and subsystems in the development of Thea Energy’s stellarator fusion systems. You will be responsible for the structural and thermomechanical design, manufacturability, analysis, development, and commissioning of these components. The Thea Energy team is comprised of driven, creative, and fun individuals passionate about solving complex problems.Key Responsibility Areas: • Have ownership of the design and development of primary and secondary mechanical fusion components and subsystems, • Work with core system-level development teams to define prototyping requirements, • Produce mechanical engineering designs, drawings, specifications, and parameters from first principles with appropriate tolerances for vendor quoting and manufacturing, • Design tooling for assembly, • Perform thermal, structural, and electromagnetic analysis and simulation using Ansys and COMSOL, • Incorporate design for manufacturing principles and support first builds, • Support the implementation of tooling and manufacturing, • Design and execute qualification testing, • Track and report results and progress against program goals and milestones, • Communicate and collaborate with internal and external stakeholders, • Mentor junior engineersIdeal Experience & Skillsets:, • Minimum of a bachelor’s degree in mechanical engineering, aerospace engineering, physics, or related fields, • Minimum of 5 years of experience, • Extensive experience as a lead designing, building, and commissioning custom systems, • Experience in mechanical engineering using CAD software (e.g. Solidworks, CATIA, NX, etc.), • Management of complex assemblies with multiple contributors, • Experience specifying machining, welding, and/or fabrication requirements, • Ability to mentor junior engineers in methods to decompose complex problems, and review that work, • Ability to take initiative and guide the design and analysis of complex components and systems with the aid of peers and team members, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Familiarity with GD&T (ASME Y14.5) & Drawing Standards, • Experience owning systems or complex sub-systems, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skills, • Innate desire to learn, innovate, and critique ideas including one’s ownCompany Benefits:, • Salary range $110,000-$180,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

Job DescriptionDescriptionPrecision Neuroscience is pioneering a brain implant, known as a brain-computer interface (BCI), to restore communication and independence for people with neurological conditions. Our cutting-edge technology is designed to empower people with paralysis to control digital devices—such as computers and smartphones—with their thoughts alone, opening new possibilities for daily life. Precision’s multidisciplinary team brings together leading experts in diverse fields such as neurosurgery, artificial intelligence, machine learning, microfabrication, electrical engineering, and more. We are committed to turning breakthrough scientific advancements into real-world solutions for people affected by conditions such as spinal cord injury, stroke, and ALS. As a Precision employee, you will be joining one of the fastest moving and best-capitalized companies in the emerging field of BCI. Since our founding in 2021, Precision has secured over $155 million in funding, developed and validated our technology, and initiated human trials in collaboration with some of the nation’s top hospitals. We are seeking a Senior Mechanical Engineer to join our Implant Hardware team to design scalable solutions to chronically implanted electronics. This position will best suit someone who is experienced with mechanical design of Class III medical devices with implantable electronics such as IPG, DBS, spinal cord stimulator, cochlear implants, etc. This is an extraordinary opportunity to join our core team to help shape the future of our company. Your work will see commercialization quickly so that we improve the lives of patients who live with neurological disorders in a matter of months and years, not decades. This position is on-site at our Manhattan office. To be eligible for this role, you must currently be based in the United States, and have working rights. Key Responsibilities • Execute hands-on design, testing, and process development tasks for mechanical packaging of implantable electronic components., • Complete hands-on assembly, integration and testing tasks while ensuring rigorous quality control is being enforced., • Collaborate with the rest of our team to publish and present our work., • BS/MS in Mechanical Engineering (ME), Biomedical Engineering (BME) or similar., • 5+ years of industry experience in mechanical engineering roles, preferably in the medical device industry., • Experience designing parts for CNC, injection molding, 3D printing, and die stamping manufacturing techniques., • Experience designing class III medical devices with implantable electronics, • Experience with medical leads, connectors, and feedthroughs., • Experience designing, evaluating, and debugging hermetic seals, laser welded/brazed joints, and thick film metalization., • Experience with compression molding, liquid injection molding, or overmolding, • Excellent organizational and communication skills; able to collaborate with neuroscientists, neurosurgeons, and electrical, software, materials, and bio engineers., • Expert in CAD (we use SolidWorks) and finite element analysis FEA, • Track record of working towards accelerated timelines.

Job DescriptionAt Vessel Technologies, we are committed to solving one of the world's most critical challenges-the global housing crisis. In 2024, we introduced the V1, a complete game changer. It's gorgeous, wickedly smart, healthy, safe, sustainable, and at an affordable price. It's going to end the global housing meltdown and restore faith in the American dream for essential members of our community, including teachers, first responders, and essential workers who can't afford a decent place to call home. We believe everyone deserves access to a healthy, safe, and beautiful home, and we are working to make that vision a reality, one Vessel at a time. As a Mechanical Engineer at Vessel Technologies, you will be crucial in developing innovative, sustainable housing solutions. You will work closely with cross-functional teams, including architects, process engineers, and project managers, to design and develop mechanical systems that align with our mission to revolutionize the housing industry. This role requires a blend of creativity, technical expertise, and attention to detail, as you will be responsible for ensuring that designs are innovative but also manufacturable and sustainable. If you are passionate about mechanical design, product development, and energy-efficient systems, this is the perfect opportunity to contribute to our fast-growing team. WHO ARE YOU? You’re driven by purpose and passionate about our mission. You know that building something transformative isn’t easy — and that’s exactly what excites you. Challenges don’t intimidate you; they motivate you. You thrive in a fast-moving, sometimes unpredictable startup environment, where collaboration, creativity, and resilience are essential. You’re a true team player who balances a work-hard/play-hard attitude with genuine respect for others. “Good enough” isn’t in your vocabulary — you’re always looking for ways to improve your craft, your tools, and yourself. You take feedback with humility, adapt quickly to change, and approach every problem with curiosity and ownership. Sound like you? Let’s talk.WHAT YOU WILL DO IN THE ROLE • Design and develop mechanical systems for Vessel's prefabricated housing products, utilizing advanced 3D modeling (Solidworks), 2D sketching tools, and design validation from concept through to documentation., • Collaborate with architects, construction teams, process engineers, and other cross-functional teams to align designs with project requirements., • Apply Design for Manufacturing (DFM) and Design for Assembly (DFA) principles to ensure manufacturability and cost efficiency of products., • Validate designs through prototyping at various stages and ensure concept integrity., • Research and recommend materials, manufacturing processes, and energy-efficient solutions to improve product design., • Lead mechanical design projects, managing timelines and coordinating with various stakeholders to ensure on-time delivery., • Ensure all designs comply with sustainability standards, industry regulations, and building codes., • Present design concepts and progress to leadership and project stakeholders, providing technical insights and recommendations.EXPERIENCE AND QUALIFICATIONS, • 3+ years of experience in mechanical design, product design, or product development., • Proficiency in SolidWorks, including 3D modeling, sheetmetal, large assembly management, and 2D detailing., • Experience with DFM/DFA principles and an understanding of manufacturing processes and materials., • Knowledge of sustainable design principles and modern building systems is a plus., • Excellent problem-solving skills with a focus on detail and accuracy., • Strong communication skills for presenting design concepts and collaborating across teams.

Job Description Salary: $70,000 - $75,000 Other Forms of Compensation: Pay Grade: 10 Crothall Healthcare is a Compass One Company that provides specialized, high-quality, innovative, and responsive support services exclusively to the healthcare industry. Crothall serves many of the Top 100 Hospitals throughout its over 1300 healthcare service teams in 46 states. Crothall has been recognized as one of Modern Healthcare’s Best Places to Work and Best Places to Work in Pennsylvania since 2013 and Becker's Top 150 Places to Work since 2016. A division of Compass Group USA, we have more than 26,000 team members. Our core services include: Environmental Services, Healthcare Technology Solutions, Patient Transportation, Laundry & Linen, Facilities Management, and Ambulatory EVS. Learn more at . Job Summary Working as an Operations Manager - Sterile Processing, you will be responsible for directing and leading all aspects of the operational needs of the sterile processing department. You will coordinate the tasks of the department associates, as well as assist in staff training and development. You will serve as a liaison between administration and hospital departments and deliver the highest possible level of service. Key Responsibilities: • Prioritizes, directs, and coordinates all sterile processing functions and activities, • Interprets policies, procedures, standards, and regulations as is appropriate to personnel/nursing and medical staff, • Performs duties of Central Supply technician as needed. Prepares work schedules, assigns personnel, evaluates work performance, and makes recommendations for personnel action, • Maintains established departmental policies, procedures, objectives, Quality Assurance program, safety, environmental, and infection control standards, • Coordinates Central Supply/Services with operating room functions and nursing unit/area functions and other user departments in order to provide services promptly and efficiently, • Sterilizes instruments, equipment, and supplies as the need arises; handles and stores these items appropriately, • Maintains the cleanliness of work areas as required, • Supervises the requisitioning, sorting, labeling, and issuance of professional equipment, • Coordinates sterilization, assembly, and storage of medical supplies and equipment, • Ensures staff compliance with sterilization techniques, policies, and procedures, • Supervises, trains, and evaluates the performance of staff, • Prioritizes, schedules, assigns, and monitors work of the staff to optimize operational service, • Ensures sterilization activities are accurately detailed and participates in the maintenance of department recordsPreferred Qualifications:, • High School Diploma or GED required; Bachelor’s degree preferred, • 2 to 3 years of progressively responsible experience in Central Sterile operations unit or similar work required, • CRCST applicable sterile processing certification required, • Good work ethic, drive, and initiative for quality and customer service, • Ability to communicate effectively in written format and oral presentations with all levels in the organization, • Excellent problem-solving skills both one-on-one and in group situations, • Exhibits initiative, responsibility, flexibility and leadership; experience managing and training hourly staff, • Ability to function appropriately under stressful conditions Crothall is a member of Compass Group USA Click here to Learn More about the Compass Story Associates at Crothall are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Flexible Time Off, • Holiday Time Off (varies by site/state), • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs), • Paid Parental Leave Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. We encourage applicants with a criminal history (and driving history) to apply. Applications are accepted on an ongoing basis. Crothall maintains a drug-free workplace. Req ID: 1465109 Crothall Healthcare JANELLE C. ALLEN [[req_classification]]

Job DescriptionAbout us: Much of what you need to know about minds + assembly is captured in the name itself: we think we create and (+) we put things together. It’s really that simple—and that shockingly different. Of course, the simplicity of our name belies the depth of what we deliver to our most honored (and often overjoyed) clients. Our work is consistently at a higher caliber than they are used to, simply because we push ourselves to think and build differently. Combine this with an obsessive attention to client service, and you arrive at a place where we stand alone among agencies. Arrogant? No. Confident? Of course, but only because we’ve put together a team of people who are good AF in every way. At minds + assembly, the engine of our business is commercial invention. We approach every project—actually, every aspect of our work—as an opportunity to dip our toes into the revitalizing stream of the new. The original conception of our agency (which has since been realized) was that of a happy workshop, a place where the mind and hands are free to construct brilliant new things for our clients. Yet, we never forget that we are in fact a business. Everything we do is to further the commercial goals of our clients, whether that is to sell a product or an idea. To achieve this, we continue to add only the best people, those who have the right talent, temperament, and teamwork-orientation to further our collective goals. Then we ask that each person adhere to two simple and equally important principles: uncompromising standards and unconditional support. In other words, we push each other, hard, to produce the best work possible, yet always with the knowledge that we have each other’s backs. About the Role: As Associate Director, SEO, you will play a critical role in helping our healthcare clients maximize the discoverability, credibility, and authority of their digital ecosystems, including branded, unbranded, and disease awareness properties. Your strategic guidance will shape how HCPs, patients, and caregivers find and engage with compliant, medically accurate content across traditional search engines and emerging AI-powered search interfaces. You will serve as the bridge between digital strategy, SEO best practices, regulatory compliance, and content development, all while ensuring alignment with client-specific medical, legal, and regulatory (MLR) requirements. There is the potential for this role to elevate thought leadership and consulting services for clients at a time when brands are seeking guidance on how to stay relevant. We are seeking a senior level technical expert with excellent client facing skills and strong collaboration ability. Key Responsibilities: SEO Strategy & Leadership • Own the development of comprehensive SEO strategies, tailored to healthcare clients, that support brand goals across multiple clients and digital properties., • Translate business objectives and audience behaviors into actionable SEO tactics., • Stay ahead of algorithm changes, search trends, pharma guidelines, and competitive landscapes to ensure clients maintain a strong organic and compliant presence., • Conduct technical SEO audits and provide recommendations to improve site crawlability, indexing, site speed, schema markup, and overall site health., • Collaborate with web development and UX teams to implement SEO best practices during site builds, migrations, or redesigns., • Guide keyword research, content planning, and metadata optimization across brand and unbranded content for both HCP and patient facing sites., • Partner with content teams to ensure alignment with SEO strategy while adhering to brand voice and MLR-approved messaging (for pharma/health clients)., • Collaborate with Regulatory, Medical, and Legal teams to define pre-approved keyword sets, acceptable claims language, and metadata frameworks., • Ensure content changes, SEO updates, and A/B testing plans are routed appropriately through MLR workflows., • 6+ years of SEO experience, including 2+ years in a management or leadership role., • Proven expertise in SEO for healthcare brands with strong knowledge of regulatory nuances and understanding of MLR processes., • In-depth understanding of technical SEO, on-page and off-page optimization, and search engine algorithms., • Deep knowledge of patient and HCP digital behaviors, especially how they search for clinical content, treatments, and support resources., • Strong analytical mindset with the ability to translate data into actionable insights. QqIex8l8vd

Job Description BronxWorks helps individuals and families improve their economic and social well-being. From toddlers to seniors, we feed, shelter, teach, and support our neighbors to build a stronger community. In all aspects of our work, we strive for the highest ethical and performance standards and guided by the belief that people are to be treated with dignity and respect regardless of their present situation or past experiences. We have 62 locations throughout the borough providing a variety of programs that offer assistance in the areas of family, children and youth support, educational services, elder care, homelessness, mental health, and workforce development. We are an employer of choice for anyone interested in a meaningful career in the social services field. Our family shelters are safe, welcoming spaces where families can stay temporarily while they work toward long-term stability. Program staff provide compassionate support, life-enhancing services, and community-based resources to help empower each family. Together, we guide families on their journey back to independence and into permanent housing. RESPONSIBILITIES • Maintenance/Repair, • Assist the superintendent in any repairs as necessary., • Facilitate work order repairs including plumbing, furniture assembly, Window ballast repair, patch and paint., • Conduct visual inspections to ensure monthly maintenance has occurred on building systems., • Locksmith duties: include cutting keys and installing locks., • Safety Adherence/Maintain facility standards, • Ensure quality standards by following procedures, including work assessment, preparation, and clean up., • Demonstrate ability to follow OSHA safety guidelines, including use of appropriate PPE and chemicals., • Maintain required inventory on each floor, including gloves, bags, mops, brooms and PPE, • Maintain compliance with DOHMH and Osha guidelines for cleanliness throughout the facility., • Lead in performing patch/ repairs; address plumbing concerns, furniture repair or set up during unit turnover, • Clean units during turnovers, including packing, cleaning of appliances, floors, kitchens and bathrooms., • Attending monthly staff meetings., • Participate in skills training, and training related to all Bronxworks staff, including mandated reporter, and Osha standards training., • Collaborate with team members and leadership to restore units for occupancy., • Maintain floors - Sweeping daily, moping all areas and buffing and waxing all areas of the building as needed., • Maintain cleanliness of the laundry room, vent cleaning, • Setup/breakdown for small and large events that occur throughout the building., • High school diploma or equivalent credentials are required., • A minimum of two years of building maintenance experience., • Proficiency in English required; proficiency in a second language preferred., • Valid driver’s license from the state in which the bearer resides preferred, with less than three (3) points acquired in the last three (3) years, • Strong maintenance skills., • Ability to pass a physical skills test., • Ability to climb and stand on a 15-foot ladder., • Ability to lift, pull, push and/or move a minimum of 60 pounds., • Ability to stand, walk, crouch or sit for long periods of time., • Ability to climb five flights of stairs., • Ability to bend and retrieve objects., • Ability to travel in the boroughs of New York City and its adjacent counties via public transportation.

Job Description • We are hiring immediately for a full time PATIENT SERVICES LEAD position., • Location: MSK Koch Center - 530 East 74st., New York, NY 10021 Note: online applications accepted only., • Schedule: Full time schedule. Days and hours may vary. More details upon interview., • Pay Range: $24.00 per hour to $26.00 per hour. We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1486151. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Diversity of thought and inclusion for all is what drives our success - we invite you to start your journey with us today! Founded in 1969, CulinArt manages more than 250 dining facilities for corporations, law and financial services firms, independent schools, colleges and universities, graduate schools, long-term care facilities and a variety of events & entertainment destinations across the country. Our mission is to be the industry leader in providing the highest quality dining service to our clients and guests while striving to provide maximum career opportunities for all of our team members. Our success lies in our ability not merely to adapt but to revitalize and transform our services continually, pioneering the cutting-edge and unconventional. CulinArt’s extremely diverse clientele, that includes many Fortune 500 businesses and esteemed educational institutions, affords great opportunities for career-advancing within the company across multiple industry segments and geographic regions. Job Summary Patient Services Leads are responsible to coordinate patient meal service and special requests and needs for the Patient Dining Program. Ensure that Patient Dining Associates are adequately trained and that units are properly staffed to provide service. They are a huge part of creating a culture of comfort and compassion in the healthcare environment, taking care of patients’ special requests and nutritional needs. Essential Duties and Responsibilities: • Oversees systems and processes to ensure that the strategic and operational objectives of the Patient Dining Program service are accomplished., • Supervise Patient Dining Associates and ensure they provide services that include helping patients make menu selections, assemble, and deliver/pick-up their meal trays., • Work with the caregivers and culinary team to determine menu alternatives for patients with food allergies and sensitivities; cultural, ethnic and religious preferences; or when a patient inquires about additional selections., • Interacts with nursing and evaluates on a daily basis patient meal selection, tray completion, tray delivery and tray retrieval process., • Is responsive to patients' needs at all times. Communicate problems or concerns with patients to appropriate personnel in a timely manner, following department procedures., • Assist dietitians, such as helping monitor patients who cannot eat food through their mouth, are on liquid diets or have a specific calorie count to manage., • Adhere to facility confidentiality and the patient’s rights policy as outlined in the facility’s Health Insurance Portability and Accountability Act (HIPAA) policies and procedures., • Complies with regulatory agency standards, including federal, state and JCAHO., • Follow Hazard Analysis Critical Control Point (HACCP) guidelines, a prevention based food safety system for meal assembly and distribution., • Comply with federal, state and local health and sanitation regulations, as well as department sanitation procedures., • Complete all daily, weekly or monthly reports as outlined in the Morrison Healthcare policies and procedures., • Conduct daily associate team meetings following Morrison’s branded GR8 Start Meeting guidelines and template., • Performs other duties as assigned. Qualifications: • Ability to communicate and read documents such as safety rules, procedure manuals, and operation and maintenance instructions., • Aptitude for effectively operating hospital’s admission, discharge and transfer (ADT) system, and other computer-based systems, which manage patient care records. Both full-time and part-time positions offer the following benefits to associates: • Retirement Plan, • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Medical, • Dental, • Vision, • Life Insurance/AD, • Disability Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. CulinArt maintains a drug-free workplace. Req ID:1486151 CulinArt Sector We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act.

Job Description About DataCamp At DataCamp, we believe in empowering individuals and teams through data literacy. As a leading platform for data science and analytics education, we offer engaging, interactive courses designed by top experts. Our mission is to make data skills accessible to everyone, helping learners and organizations thrive in the data-driven world. With a diverse community of millions of learners, we provide a supportive and dynamic environment where you can grow your career and make an impact. Join us and be part of our journey to democratize data education! With the launch of our Professional Services offering—including live masterclasses, tailored live learning sessions, and end-to-end upskilling programs—we now partner with clients not only as a platform provider, but as a transformation enabler. About the role The Sales Account Director, Professional Services will report to the Head of Professional Services and play a foundational role in building and scaling DataCamp's new services business. You will position DataCamp as a strategic upskilling partner, selling high-value transformational programs that combine our platform with live instruction, expert-led masterclasses, and tailored learning journeys. This role requires a highly consultative seller who can engage senior executives, diagnose organizational skill gaps, shape learning solutions, and co-design multi-phase programs that upskill entire teams and functions. About you At DataCamp, we seek individuals who embody our core values of data-driven decision-making, action, transparency, ownership, and customer focus. You thrive in a fast-paced, high-performing environment and are driven by a passion for making a meaningful impact. You're adaptable, embracing change and ambiguity with enthusiasm. Your initiative and entrepreneurial spirit push you beyond just meeting targets—you aim to understand the "why" behind our goals and take ownership to drive the business forward. You're a collaborative team player who values transparency and always seeks to improve and innovate. If this sounds like you, we encourage you to apply! Responsibilities • Strategic Targeted Accounts: Identify growth opportunities by prospecting a highly-targeted account list, selected on high-potential, • Collaborate closely with Enterprise Account Executives to identify opportunities within existing platform accounts, co-create upsell strategies, and position Professional Services as a value-adding extension of the DataCamp platform, • Building Relationships: Become familiar with customer processes and challenges, ensuring meaningful questions are posed and answered. Provide value in every interaction. Establish relationships with multiple buyer personas within the prospect account, • Communicating Value: Engage prospects with DataCamp's integrated services and partnership to achieve data fluency, • Account Coordination Strategy: Utilize a structured and disciplined approach to effectively engage multiple resources, from solution architects to the leadership team, from product teams to legal teams, or finance teams, to achieve the best results, • Sales Strategy Execution: Gain valuable insights into customer strategies, priorities, needs, and organizational structure. Create customized account plans to ensure the achievement of revenue targets and foster balanced growth, • DataCamp Learn & Workspace: Demonstrate a thorough knowledge of DataCamp's learning platform and services. Ability to articulate the DataCamp value proposition effectively, • Journey of Learning: Build long-term partnerships by working closely together to create customized data literacy training programs, including data boot camps that meet their unique needs and goals, • 5+ years in consultative enterprise sales, preferably in consulting, professional services, L&D solutions, data analytics/visualization or transformation programs., • Experience selling to and influencing leadership level coupled with the ability to foster consensus among purchasing teams in Global 2000 companies, • Strong discovery skills and the ability to deeply engage clients, build a compelling transformation vision, and navigate complex customer organizations, • A track record of success in driving consistent activity, pipeline development, and quota achievement, • Skilled at establishing trusted relationships with business managers and executives, • Strong prospecting process to uncover the immediate value DataCamp delivers, showcasing our commitment to empowering customers for sustained success on their data fluency journey, • Pro-active, independent thinker with high energy and a positive attitude, • Collaborative mentality and commitment to continuous skills development, • Proven ability to independently manage, develop, and close new client relationships, • Exceptional time and communication skills to assembly resources and advance opportunities, including presentation skills Joining DataCamp means becoming part of a dynamic, creative, and international start-up. Here are just a few of the reasons why you'll love being on our team: • Exciting challenges: Face new technical challenges daily, keeping your work engaging and rewarding., • Competitive compensation: We offer a competitive salary with attractive benefits., • Flexibility: Benefit from flexible working hours because the future is flexible!, • Travel: we gather teams into one of our offices a few times a year to stay connected, • Global retreats: Participate in international company retreats, fostering a global team spirit., • Continuous learning: Access a yearly learning budget for conferences & training to support your professional growth., • Equipment: Yearly IT Equipment budget towards your home working set up., • On Us Lunch: Delicious lunches on DataCamp when you're at the office. The base salary for this position may vary based on several factors, including the approved job level. The base salary range for this role is $150,000 (Total OTE: $300,000). Salary is one component of our total compensation package. This position also qualifies for equity (i.e., stock options). The benefits available for this position include flexible time off, a 401K retirement plan + matching, insurance (medical, dental, vision, life), and 11 paid holidays. We also provide paid sick time as required by state and local law. Additional benefits and perks contained in our standard employee benefits package are also offered for this position. At DataCamp, we value diverse experiences and perspectives. If you're excited about this role but don't meet every qualification, we still encourage you to apply. We believe skills can be developed and are committed to fostering an inclusive workplace where everyone can thrive. Your unique talents and perspectives are what make our team great!

Job Description The Source Inspector, (SI) is responsible for performing inspection operations of in-process or completed hardware, including dimensional, and visual inspection. The source inspection may include reviewing all paperwork relating to the product at hand. This includes operations such as Final Inspection, Receiving Inspection, Outside processing, and Assembly. The SI will also verify FAI’s to AS9102 for accuracy and completeness. The SI must be familiar with hand tools and gaging techniques. The SI will also be fluent in B/P interpretation and GD&T. Source Inspection will occur at end customer’s suppliers’ location. The SI will travel to these locations. Job Functions: • Experienced quality individual in dimensional and visual inspection of aerospace machined components, • Experience in performing FAI’s – AS9102 (The SI will verify supplier’s FAI, not perform them), • Experience with hand measurement tools, • Knowledge of CMM Inspection process (Knowledge of CMM Programming is not required), • Knowledge and experience in GD&T (ASME Y14.5), • Knowledge and experience with blueprint interpretation, • Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection), • Experienced quality individual in dimensional inspection of aerospace machined components, • Experience in performing FAI’s – AS9102, • Experience with hand measurement tools, • Knowledge of CMM Inspection process (Knowledge of CMM Programming is not required), • Knowledge and experience in GD&T (ASME Y14.5), • Knowledge and experience with blueprint interpretation, • Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection), • MS Outlook, and EXCEL experience, • Mechanical inspection experince preferred, • Strong verbal, written and communication skills, • Fluent English – reading and writing is required, • Professionalism, integrity, and exceptional attention to detail, • Strong independent decision-making skills; excellent analytical skills and professional judgment, • Excellent interpersonal, written, and verbal communication skills, • Work as an effective team member, • Establish and maintain effective working relationships, • Fluent English – reading and writing is required, • Pass pre-hire background check including DMV and credit screening, • Pass Pre-hire Drug Screening Supervision Received:, • The work is performed under general supervision, • U.S. Citizenship required Preferred Education and Skills (including certifications): • 3+ years’ experience as a quality inspector, technician, or engineer., • 3+ years’ experience in an aerospace manufacturing facility, • 3+ years’ experience in inspection duties, FAI’s GD&T, and b/p interpretation, • Proficient with Microsoft Outlook and Excel, • Effective communication skills, • Detail oriented, • Any combination of education and experience may be considered BENEFITS: • 12 days paid vacation first year, increasing with service years, • 10 days paid sick time, • 11 paid holidays, • Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents, • Champ Plan Wellness and Health, • Free to employees working minimum 20 hours/week with anticipated $30k/annual earnings, • Participation increases net take home pay $$$ in most instances, • Free wellness initiatives, • Free tele-health, • Free and discounted RX, • Auto enrollment (unless tax elections result in negative impact), • Eligible on the 1st of the month following 30 days of continuous employment, • requires monthly 10-minute wellness activity participation, • 401k retirement savings with match, • Eligible on the first (1st) of the month following 90 days of continuous employment, • 100% match of 1st 3% contribution, • 50% match of next 2% contribution, • IMMEDIATE VESTING, • Company-provided cell phone, laptop, mobile wi-fi (for business use only), • Regular Hourly rate for travel time, • Direct Pay Travel arrangements for flights, hotels and rental cars, • Travel Reimbursements direct deposited with each payroll, • Federal rate Mileage reimbursement (.67/mile 2024) when driving personal vehicles on company business, • Per diem reimbursements for meals and incidentals, • Overnight trips - Up to $75, • Leaving home after 4 pm $40, • Federal rate mileage reimbursement (.67/mile 2024) when driving personal vehicles on company business, • Direct Pay Travel arrangements for flights, hotels and rental cars, • Travel Reimbursements direct deposited with each payroll, • Per diem reimbursements for meals and incidentals, • Overnight trips - Up to $75, • Leaving home after 4 pm $40, • $1500 EMPLOYEE REFERRAL BONUS, • Initial $750 paid upon hire of qualified referred employee (rehires excluded) Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. Company DescriptionTRIGO Aerospace, Defense and Rail (ADR) AMERICAS’ team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results, providing a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Thank you for visiting our Job Board. Please review our open positions and apply to the positions that match your qualifications. TRIGO ADR Americas, LLC is an Equal Opportunity Employer, including disabled and veterans. NOTICE OF AFFIRMATIVE ACTION PLAN FOR INDIVIDUALS WITH DISABILITIES,TRIGO Aerospace, Defense and Rail (ADR) AMERICAS’ team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results, providing a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain.\r\n\r\nThank you for visiting our Job Board. Please review our open positions and apply to the positions that match your qualifications.\r\n\r\nTRIGO ADR Americas, LLC is an Equal Opportunity Employer, including disabled and veterans.\r\n\r\nNOTICE OF AFFIRMATIVE ACTION PLAN FOR INDIVIDUALS WITH DISABILITIES,

Job Description About DataCamp DataCamp's mission is to empower everyone with the data and AI skills essential for 21st-century success. By providing practical, engaging learning experiences, DataCamp equips learners and organizations of all sizes to harness the power of data and AI. As a trusted partner to over 17 million learners and 6,000+ companies, including 80% of the Fortune 1000, DataCamp is leading the charge in addressing the critical data and AI skills shortage. About the role The Corporate Account Executive will report to the Director of Corporate Sales, Americas. The successful applicant will work across multiple high-profile projects, helping empower a diverse range of companies with better data-driven decisions and through increasing company-wide data and AI literacy. You will manage your own book of business containing accounts with yearly revenue figures of up to $5 billion from prospect to close. In the backdrop of the data and generative AI revolution, you'll play a major role in equipping businesses to succeed in a new digital-first era. You'll love working with us if you value curiosity, continuous learning, and new technology with a desire to cultivate a culture where everyone contributes to our success. DataCamp is the go-to platform for hands-on education. Through bite-sized learning, anyone can learn data and AI more quickly—accelerating their learning-to-apply process. You'll be a valuable addition to our community, where we've already impacted over 12 million individuals and 4,000 organizations, as we scale our mission to transform more lives through data and AI skills. About you At DataCamp, we seek individuals who embody our core values of data-driven decision-making, action, transparency, ownership, and customer focus. You thrive in a fast-paced, high-performing environment and are driven by a passion for making a meaningful impact. You're adaptable, embracing change and ambiguity with enthusiasm. Your initiative and entrepreneurial spirit push you beyond just meeting targets—you aim to understand the "why" behind our goals and take ownership to drive the business forward. You're a collaborative team player who values transparency and always seeks to improve and innovate. If this sounds like you, we encourage you to apply! Responsibilities • Strategic Targeted Accounts: Identify growth opportunities by prospecting a highly-targeted account list, selected on high-potential, • Building Relationships: Become familiar with customer processes and challenges, ensuring meaningful questions are posed and answered. Provide value in every interaction. Establish relationships with multiple buyer personas within the prospect account, • Communicating Value: Engage prospects with DataCamp's integrated services and partnership to achieve data fluency, • Account Coordination Strategy: Utilize a structured and disciplined approach to effectively engage multiple resources, from solution architects to the leadership team, from product teams to legal teams, or finance teams, to achieve the best results, • Sales Strategy Execution: Gain valuable insights into customer strategies, priorities, needs, and organizational structure. Create customized account plans to ensure the achievement of revenue targets and foster balanced growth, • DataCamp Learn & Workspace: Demonstrate a thorough knowledge of DataCamp's learning platform and services. Ability to articulate the DataCamp value proposition effectively, • Journey of Learning: Build long-term partnerships by working closely together to create customized data literacy training programs, including data boot camps that meet their unique needs and goals, • Minimum of 3 years of experience in quota-carrying sales roles with a focus on Corporate (Mid-Market/Commercial) companies and have proven hunting and closing experience., • Experience selling a Data Analytics or Data Visualization product to C-level or senior management, • Experience selling to and influencing C-level executives, • A track record of success in driving consistent activity, pipeline development, and quota achievement, • Skilled at establishing trusted relationships with business managers and executives, • Strong prospecting process to uncover the immediate value DataCamp delivers, showcasing our commitment to empowering customers for sustained success on their data fluency journey, • Pro-active, independent thinker with high energy and a positive attitude, • Collaborative mentality and commitment to continuous skills development Proven ability to independently manage, develop, and close new client relationships, • Exceptional time and communication skills to assembly resources and advance opportunities, including presentation skills Why Datacamp? Joining DataCamp means becoming part of a dynamic, creative, and international start-up. Here are just a few of the reasons why you'll love being on our team: • Exciting challenges: Face new technical challenges daily, keeping your work engaging and rewarding., • Competitive compensation: We offer a competitive salary with attractive benefits., • Flexibility: Benefit from flexible working hours because the future is flexible!, • Continuous learning: Access a yearly learning budget for conferences & training to support your professional growth., • Global retreats: Participate in international company retreats, fostering a global team spirit., • Equipment: Yearly refreshment of your IT Equipment budget for your home working setup. At DataCamp, we strive for market alignment and internal equity as a key part of our compensation approach. The total range (base + OTE) for this role is $190,000; actual pay will be determined based on the individual's skills, experience, and location. Salary is one component of our total compensation package. This position also qualifies for: • Equity (i.e., stock options)., • Unlimited PTO, • 401K retirement plan + matching, • Insurance (medical, dental, vision, life)

Job Description Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufactures of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Summary of Responsibility: A Field Service Technician is a key member of the Customer Support Department and is primarily responsible for the installation, preventive maintenance, solving and repair of Computer Numerically Controlled (CNC) Lathe, Milling and Multi-Functional Machining Centers. We are seeking customer focused professionals who have a positive attitude, a high interest in learning and great Customer service skills. This opportunity is an above average platform for technical advancement and compensation growth. What You Will Contribute: The CNC Field Service Technician must have or be willing to learn through training on the job and classroom an understanding of mechanical drawings, electrical/pneumatic/hydraulic schematics, PLC ladder diagrams and testing equipment required to effectively diagnose and resolve issues with electrical/mechanical components, as well as electro-mechanical and machine control systems. • Daily travel from home to Customer facilities with occasional overnight hotel stays required when servicing remote Customer locations within the designated coverage territory or when participating in remote training programs., • Demonstrating a willingness to help others and be a team member, • Install, commission, calibrate, maintain, tackle, diagnose, and repair CNC equipment and accessory CNC equipment at customer facilities. Service calls also include operator training, networking between systems, software applications, preventive maintenance, major assembly replacements and alignments, overhauls/refurbishments, upgrades/retrofits, and un-installation services., • Provide a direct communication link between the Customer and the Service Group of the Robert E. Morris Company., • Provide voice of Customer feedback., • Through service and Customer relationships, build brand dedication., • Conduct travel and work in a safe manner, constantly learning new technology and soft skills., • Apply machine tool manuals, technical documents, as well as internal and external authorities to optimally diagnose and resolve CNC equipment issues., • Proficient verbal and written communication and Customer relation skills., • Able to interact and effectively communicate in person and over the phone with customer and co-workers., • Present a professional image., • Must be adaptable to changes and able to deal with change, delays, or general work-related issues., • Basic digital literacy and shown understanding of MS Word, Excel, and Outlook., • Must have, and/or be willing/capable of being trained to develop, electro-mechanical skills (motors, drives, transformers etc.)., • Knowledge of machine tool manufacture, installation, operation, maintenance & repair and/or a broad shop background – is a plus., • Basic mechanical and logical solving skills are a must. What’s in it for You: • We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work:Competitive starting salary, • Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance, • 3+ Weeks’ Vacation to Start, • 10 Company Paid Holidays, • 401(k) retirement plan with company contributionTuition reimbursement, • Employee appreciation events and perksEmployee Assistance Program Mental and Physical Requirements: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Must be highly mobile, able to access all areas of the premises., • Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects., • Ability to sit for prolonged period of times., • Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees., • Ability to frequently use hands and arms., • Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. Requisition #: 1440B, Newark NJ

Job DescriptionRadical AI, Inc. is an artificial intelligence company that is accelerating scientific research & development. We are at the forefront of innovation in the field of materials R&D, a critical driver for advancing our most cutting-edge industries and shaping the future. Breaking away from the traditionally slow and costly R&D process, Radical AI leverages artificial intelligence and machine learning to pioneer generative materials science. This innovative field blends AI, engineering, and materials science, revolutionizing how materials are created and discovered. Radical AI's approach speeds up R&D and addresses global challenges, setting new benchmarks in technology and sustainability. As a Mechanical Engineer at Radical AI you will design and build a suite of novel robotic and autonomous systems to drive a first of its kind material science research and discovery laboratory. Our Mechanical Engineering team owns all aspects of the physical manifestation of our technology. You will help define design requirements from a greenfield solution space and then execute on 3D design, prototyping, validating, and installing mechanical systems within our lab. You will solve a vast array of interconnected problems involving material handling, precision motion control, and refitting state of the art laboratory and metallurgical equipment for automation and programmatic control. You will take ownership of individual projects and subsystems and bring them to completion using your knowledge of rapid prototyping and low volume manufacturing techniques. Your hardware will fit in seamlessly with the Radical AI branding language and smoothly interface with peripheral systems and equipment. You’ll leverage your experience and expertise to become an indispensable contributor to collaborative engineering initiatives.Mission • Contribute to and actualize the vision of the Mechanical Engineering team as we tackle solving complex and interconnected material handling challenges, and innovate novel solutions to automating the operation of existing equipment and systems., • Use your 2D and 3D visualization skills to communicate complex ideas, designs, and geometries in group ideation sessions that include a non-technical audience., • Design complex systems and assemblies in CAD to demonstrate viable solutions to automation challenges., • Rapid prototype to prove design efficacy, then facilitate part fabrication from outside vendors to build your system and integrate it with software and controls., • Help shape the culture of the hardware team by leading from the front and demonstrating a disciplined sense of organization, eye for detail, and an impeccable level of polish and craftsmanship., • Bring an attitude of collaboration and openmindedness, to facilitate fearless and creative problem solving that empowers our team to ship world class technology at an unprecedented speed.About you, • Minimum B.S. in Mechanical Engineering or a closely related field., • 3-5 years industry experience in mechanical engineering involving part and assembly design., • Proficiency with CAD software, we use SOLIDWORKS., • Well versed in common rapid prototyping and part fabrication techniques and DFM best practices., • CNC part design, sheet metal part design, 3D printing, metal casting, etc., • Proven track record of delivering novel mechanism and machine designs. Excellent hands on fabrication and assembly skills., • Excellent communication and interpersonal skills.Pluses, • Experience in industrial automation settings and design of automation equipment., • Familiarity with 6 DOF arms cobots, and their implementation., • Experience with PLCs, motor drivers, and motion control systems. Experience with simulation and analysis tools like FEA or CFD., • Experience or exposure to the design and utilization of material handling systems., • AMRs, ASRS, conveyance systems, etc.What we offer, • A competitive compensation package also includes the best in benefits:, • Medical, dental, and vision insurance for you and your family, • Mental health and wellness support, • Unlimited PTO and 14+ company holidays per year, • 401K, • Work closely with a team on the cutting edge of AI research. Disclosure Radical AI is committed to equal employment opportunity regardless of race, color, ancestry, national origin, religion, sex, age, sexual orientation, gender identity and expression, marital status, disability, or veteran status.

Job Description Salary: $70,000 - $75,000 Other Forms of Compensation: Pay Grade: 10 Crothall Healthcare is a Compass One Company that provides specialized, high-quality, innovative, and responsive support services exclusively to the healthcare industry. Crothall serves many of the Top 100 Hospitals throughout its over 1300 healthcare service teams in 46 states. Crothall has been recognized as one of Modern Healthcare’s Best Places to Work and Best Places to Work in Pennsylvania since 2013 and Becker's Top 150 Places to Work since 2016. A division of Compass Group USA, we have more than 26,000 team members. Our core services include: Environmental Services, Healthcare Technology Solutions, Patient Transportation, Laundry & Linen, Facilities Management, and Ambulatory EVS. Learn more at . Job Summary Working as an Operations Manager - Sterile Processing, you will be responsible for directing and leading all aspects of the operational needs of the sterile processing department. You will coordinate the tasks of the department associates, as well as assist in staff training and development. You will serve as a liaison between administration and hospital departments and deliver the highest possible level of service. Key Responsibilities: • Prioritizes, directs, and coordinates all sterile processing functions and activities, • Interprets policies, procedures, standards, and regulations as is appropriate to personnel/nursing and medical staff, • Performs duties of Central Supply technician as needed. Prepares work schedules, assigns personnel, evaluates work performance, and makes recommendations for personnel action, • Maintains established departmental policies, procedures, objectives, Quality Assurance program, safety, environmental, and infection control standards, • Coordinates Central Supply/Services with operating room functions and nursing unit/area functions and other user departments in order to provide services promptly and efficiently, • Sterilizes instruments, equipment, and supplies as the need arises; handles and stores these items appropriately, • Maintains the cleanliness of work areas as required, • Supervises the requisitioning, sorting, labeling, and issuance of professional equipment, • Coordinates sterilization, assembly, and storage of medical supplies and equipment, • Ensures staff compliance with sterilization techniques, policies, and procedures, • Supervises, trains, and evaluates the performance of staff, • Prioritizes, schedules, assigns, and monitors work of the staff to optimize operational service, • Ensures sterilization activities are accurately detailed and participates in the maintenance of department recordsPreferred Qualifications:, • High School Diploma or GED required; Bachelor’s degree preferred, • 2 to 3 years of progressively responsible experience in Central Sterile operations unit or similar work required, • CRCST applicable sterile processing certification required, • Good work ethic, drive, and initiative for quality and customer service, • Ability to communicate effectively in written format and oral presentations with all levels in the organization, • Excellent problem-solving skills both one-on-one and in group situations, • Exhibits initiative, responsibility, flexibility and leadership; experience managing and training hourly staff, • Ability to function appropriately under stressful conditions Crothall is a member of Compass Group USA Click here to Learn More about the Compass Story Associates at Crothall are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Flexible Time Off, • Holiday Time Off (varies by site/state), • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs), • Paid Parental Leave Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. We encourage applicants with a criminal history (and driving history) to apply. Applications are accepted on an ongoing basis. Crothall maintains a drug-free workplace. Req ID: 1465926 Crothall Healthcare JANELLE C. ALLEN [[req_classification]]

Job Description The Production Supervisor leads a sound, efficient, safe, and effective production operation and implements our vision for this business-critical function at Cresilon. The Production Supervisor oversees optimal and cost-effective aseptic manufacturing practices in a fast-paced environment through collaboration with stakeholders, production engineers and technicians. The Production Supervisor should have a strong operational, quality, compliance, and technical background. This is often a hands-on role working closely with the production team to troubleshoot process and equipment challenges. They must ensure production processes comply with local, State, and Federal regulations, including current Good Manufacturing Practices (cGMP). This is a full-time, on-site position, located in Brooklyn, New York. It is a multi-faceted role in a highly collaborative environment that will require strong leadership and focused execution in pursuit of maximizing production outputs, on-time customer shipping and overall robust manufacturing processes. Shift Timing: Second shift is currently defined as 11:00am-7:30pm. This timing will shift to 3:00pm-11:30pm within ~6 months. During training, the 2nd shift production supervisor will occasionally be required to work 1st shift (7:00am-3:30pm). Hours may vary depending on company requirements. Responsibilities: · Organizes, and leads production operations and associated production activities to drive production target while maintaining quality, cost, and customer service expectations within a safe working environment. · Manages a team of production technicians. · Manages production KPIs including, labor budget, yield, and OEE, and ensures target production metrics are met. · Communicates production results and challenges. Troubleshoots and implements solutions to issues quickly and efficiently to avoid potential delays. · Ensures all tasks associated with manufacturing operations are performed in accordance to cGMP and SOPs, and ensures batch record requirements are completed in a timely manner. · Supervises all aspects of production, including the assembly, disassembly, cleaning, and storage of manufacturing equipment, the cleaning of the cleanroom facility, formulation, filling/finishing, and product shipping operations related to the second shift of technicians. · Acts as a subject matter expert on Manufacturing Practices, including in aseptic behaviors and practices. · Implements continuous improvement, leveraging expertise in Six Sigma, Lean, or Toyota Production System (TPS) approaches. · Adheres to all workplace safety laws, regulations, standards and practices and actively advances a culture of safety within their team and organization. · Resolves or escalates any problem occurring in the area that affects product quality, safety, and other aspects of production line performance. · Demonstrates the ability to properly operate equipment, perform equipment set-up/change-over/cleanups, assist in preventative maintenance and troubleshoots equipment problems to achieve optimum production targets. · Establishes a working environment that fosters participation within and between teams. · Hires, trains, develops, disciplines, and discharge production technicians. · Develops, mentors, and supports production technicians in assisting continuous improvement efforts, improving employee engagement, and supporting business growth. · Ensures compliance with Quality Assurance and Quality Control requirements and participates in timely investigations and implementation of corrective and preventative action. · Ensures records are maintained per SOPs and cGMP requirements. · Generates production batch procedural documentation, manages change assessments, and nonconformance reports. · Creates, updates, reviews, and maintains production-related SOPs. · Reviews and approves documents, including standard operating procedures, batch records, and material specifications. · Leads the execution of and training for newly transferred or existing products and processes. · Leads and assists with the continuous improvement of production operations and procedural documentation. · Organizes and leads initial and on-going training of new and existing personnel. · Maintains appropriate inventory of production supplies and materials. · Ensures on time delivery and quality through accurate work order completions, on time shipping, and accuracy of inventory consumption. · Other responsibilities as required or assigned by management. Requirements Education: Bachelor’s degree with a focus on science or engineering is preferred. Qualifications: · 3+ years of relevant cGMP manufacturing experience with a minimum of one year managing hands-on manufacturing operations with direct supervisor responsibility. · Experience in GMP cleanroom operations, including aseptic processing. · Strong leadership skills with the ability to motivate staff members and develop a culture of operational excellence · Experience in supporting regulatory inspections and audit readiness activities is required. · Experience with lean manufacturing or six sigma. · Working knowledge of quality management systems. · Previous experience in any of the following areas is preferred: formulation, fill and finish operations, and packaging. · Ability to multitask and prioritize work, while remaining detail oriented. · Team oriented with the ability to build relationships and influence and/or enforce decisions with peers and management in a proactive manner. · Strong leadership skills with a proven ability to build, motivate, and maintain a high performing, cohesive team with the ability to inspire passion and commitment and lead and facilitate operational and cultural change initiatives. · Demonstrated experience training technical personnel is required. · Adept at motivating others in a deadline driven environment. · Proven history of owning quality and efficiency KPIs and driving them in a positive direction · Proven leadership skills, capability and ability to mentor, coach, and develop a team and other associates · Organizational and time management skills with the ability to prioritize a variety of tasks/projects. · Ability to handle multiple project assignments of medium scope and complexity and able to prioritize and complete work with a sense of urgency in a timely manner. · Mathematically inclined with strong analytical and problem-solving skills with the ability to be observant and to think creatively. · Excellent verbal and written communication skills required. · Demonstrated understanding of aseptic processing and microbial control concepts preferred. · Strong computer skills, with proficiency in the use of Microsoft Excel, Microsoft Word, Microsoft PowerPoint required. · Legal authorization to work in the United States is required. Physical Requirements: · Ability to become gowning qualified to work in a cleanroom environment. · Ability to climb, balance, stoop, reach, stand, and walk. · Ability to bend, twist, push, lift, and grasp. · Ability to speak, listen, and understand verbal and written communication in English. · Ability to pass respirator fit test. · Ability to work for extended periods of time with appropriate respiratory equipment. · Manual dexterity to perform delicate manipulations. · Ability to perform repetitive motions, including the substantial movement of wrists, hands, and or fingers. · Ability to lift 50 pounds of force occasionally and to lift, carry, push, pull, or otherwise move objects. · Visual acuity to perform close activities such as: reading, writing, and analyzing; and to determine the accuracy, neatness, and thoroughness of work assigned or to make general observations Benefits · Competitive annual base salary range of $90,000 - $120,000, depending upon job level and qualifications. · Paid Vacation, Sick, & Holidays · Medical, Dental, and Vision Insurance, FSA: Dependent & Healthcare, Commuter & Parking Benefits, Long Term Disability Coverage · Company Paid Life and Short-Term Disability Coverage · Work/Life Employee Assistance Program · 401(k) & Roth Retirement Savings Plan with company match up to 5% · Monthly MetroCard Reimbursement Cresilon is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. Cresilon makes hiring decisions based solely on qualifications, merit, and business needs at the time.

Job Description The Source Inspector, (SI) is responsible for performing inspection operations of in-process or completed hardware, including dimensional, and visual inspection. The source inspection may include reviewing all paperwork relating to the product at hand. This includes operations such as Final Inspection, Receiving Inspection, Outside processing, and Assembly. The SI will also verify FAI’s to AS9102 for accuracy and completeness. The SI must be familiar with hand tools and gaging techniques. The SI will also be fluent in B/P interpretation and GD&T. Source Inspection will occur at end customer’s suppliers’ location. The SI will travel to these locations. Job Responsibilities: • Experienced quality individual in dimensional inspection of aerospace machined components, • Experience in performing FAI’s – AS9102, • Experience with hand measurement tools, • Knowledge of CMM Inspection process, • Knowledge and experience in GD&T (ASME Y14.5), • Knowledge and experience with blueprint interpretation, • Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection), • Reads, interprets, and utilizes Quality policies, procedures, blueprints, and other documentation, • Process warehouse materials, • Rely on instructions and pre-established guidelines/procedures to perform the functions of the job, • Support positive corrective actions and identification of root cause, • Other duties as assigned.Required Skills, • Experienced quality individual in dimensional inspection of aerospace machined components, • Experience in performing FAI’s – AS9102, • Experience with hand measurement tools, • MS Outlook, and EXCEL experience, • Experience with hand measurement gages, conduct conventional inspection to engineering requirements, • Knowledge and experience in GD&T (ASME Y14.5), • Knowledge and experience with blueprint interpretation, • Valid drivers license and auto insurance required.Additional Desired Skills:, • Prior practical experience and implementation of Quality inspection tools and equipment., • Experience in RCCA, and problem solvingGeneral Requirements, • Ability to handle complex situations and solve complex problems, • Ability to work effectively under pressure to meet deadlines, • Ability to press and analyze technical and business information, • Ability to work in a team environment with strong communication skills (verbal and written), ability to interact via telephone, email with co-workers, • Ability to remain seated for up to 5 hours at a time, • Fluent English – reading and writing is required, • Professionalism, integrity, and exceptional attention to detail, • Strong independent decision-making skills; excellent analytical skills and professional judgment, • Excellent interpersonal, written, and verbal communication skills, • Must be able to simultaneously manage several objectives, • Must be detail oriented, organized, and self-motivatedAdditional Qualifications (Preferred):, • 3+ years’ experience as a quality inspector or technician., • 3+ years’ experience in an aerospace manufacturing facility, • 3+ years’ experience in inspection duties, FAI’s GD&T, and b/p interpretation, • Proficient with Microsoft Office products, • Effective communication skills, • Detail oriented, • Any combination of education and experience may be considered, • The General Vision Acuity Test shall be performed by an Oculist, Optometrist, or other professionally recognized person. The following requirements shall apply. • Near Vision – Eyes meets Orthorater 8 (95% or Jaeger #2 at 12 inches), • Far vision – Eyes meets Orthorater 4 (76%) or Snellen Chart 20/50, • Color Perception – 6 of 9 Orthorater plates US or International citizenship or permanent residence status required depending on work location. • Valid Driver’s License, • 12 days paid vacation first year, increasing with service years, • 10 days paid sick time, • 11 paid holidays, • Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents, • Champ Plan Wellness and Health, • Free to employees working minimum 20 hours/week with anticipated $30k/annual earnings, • Participation increases net take home pay $$$ in most instances, • Free wellness initiatives, • Free tele-health, • Free and discounted RX, • Auto enrollment (unless tax elections result in negative impact), • Eligible on the 1st of the month following 30 days of continuous employment, • requires monthly 10-minute wellness activity participation, • 401k retirement savings with match, • Eligible on the first (1st) of the month following 90 days of continuous employment, • 100% match of 1st 3% contribution, • 50% match of next 2% contribution, • IMMEDIATE VESTING, • Company-provided cell phone, laptop, mobile wi-fi (for business use only), • Regular Hourly rate for travel time, • Direct Pay Travel arrangements for flights, hotels and rental cars, • Travel Reimbursements direct deposited with each payroll, • Federal rate Mileage reimbursement (.70/mile 2025) when driving personal vehicles on company business, • Per diem reimbursements for meals and incidentals, • Overnight trips - Up to $75, • Leaving home after 4 pm $40, • Federal rate mileage reimbursement (.70/mile 2024) when driving personal vehicles on company business, • $1500 EMPLOYEE REFERRAL BONUS, • Initial $750 paid upon hire of qualified referred employee (rehires excluded) Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. Powered by JazzHR h8grXnYnEt

Job DescriptionKeyholder - Full-Time Brooklyn, NY - Williamsburg At Rothy’s, we know there’s a better way to do business, and it starts by putting the planet and its people first. More than 200 million single-use plastic bottles and 715,000 pounds of ocean-bound marine plastic have been transformed into our signature thread, creating wardrobe staples that look just as good as they feel. Striving for zero waste, we combine 3D knitting technology and handcrafted assembly to create machine washable styles that don’t compromise on comfort. From classic shoes to carry-everywhere bags, we create essentials for wherever you go. Building a sustainable future is at the heart of everything we do. We pride ourselves on fostering an inclusive environment at our HQ, retail stores and wholly-owned factory, and are growing our community every day. About the Team: Our phenomenal Retail team interacts with our customers in a super special way. Shopping at Rothy’s IRL is not your ordinary retail experience, so naturally, our staff is extraordinary too. Members of this team are experts in the fit, wear, and sizing of our shoes. They have deep knowledge of every style and out-of-this-world customer service skills. Our customers love shopping in stores due to the exceptional experiences they have with our Retail team. We’re looking for a Keyholder who has experience on the sales floor and can quickly learn our policy and procedures. If you’re organized, proactive, and looking for a customer-oriented role, this might be the role for you! What you’ll do: * Act as Manager on Duty when ASM and SM are not present. * Learn all operational procedures and assist with all customer-related inquiries on the floor * Oversee opening and closing procedures for the store * Effectively communicate Rothy’s brand story, values, and mission to our customers * Support store leadership in communicating important updates to Retail Associates * Assist in keeping the entry area, display area, and floor clean and tidy * Supervise vendors for cleaning, in-store fixtures, or updates occurring at the store * Share expert brand and product knowledge to allow customers to personally experience our style, look, and quality of our shoes * Serve as a point person for all store associate questions and relay outstanding questions or issues to store leadership (Store Manager and Assistant Store Manager) You have: * You have had 2+ years of Retail, Hospitality, or a customer-oriented experience * You have a positive attitude and a relentless focus on making sure our customers are happy * You love collaborating and working in a team environment * Availability to work full time, 5 days a week, including Fridays, weekends, evenings and holidays You are: * You are comfortable in a fast-paced, ever-changing environment * You are an excellent communicator * You are a careful listener that thinks on their feet and can provide solutions in a timely manner * Comfortable working on your feet up to 8 hours a day in a busy store environment; able to lift up to 25 pounds * 18 years of age or older Our benefits: * Medical, dental and vision insurance * 4 weeks of paid time off plus paid holidays and paid wellbeing leave * 401(k) with employer match * Flexible Spending Accounts * Commuter benefits * A product allowance (like the allowance you got as a kid only better)! * Life insurance (for you and your family) Pay Range $21.00 - $23.00 per hour Base pay is one part of the total rewards package that is provided to compensate and recognize employees for their work. This role may be eligible for additional discretionary bonuses/incentives, as well as a comprehensive benefits package. Base pay will vary based on factors such as qualifications, experience, skill level, competencies and work location. We will meet minimum wage or minimum of the pay range (whichever is higher) based on city, county and state requirements. Please see our Privacy Policy here

Job Description • We are hiring immediately for a part time PATIENT SERVICES LEAD position., • Location: Michelle Jablons - 1000 10th Avenue, New York, NY 10019 Note: online applications accepted only., • Schedule: Part time schedule. Must be able to work every other weekend, 12:00 pm - 8:00 pm. More details upon interview., • Requirement: Food Handlers certification or ServSafe required., • Pay Range: $16.50 per hour to $26.20 per hour. Make a difference in the lives of people, your community, and yourself. Join a culture of opportunity with Morrison Healthcare. Our careers are filled with purpose and empower you to transform healthcare experiences. Take a look for yourself! Morrison Healthcare is a leading national food and nutrition services company supporting more than 1,000 hospitals and healthcare systems across 46 states, many of which are recognized as U.S. News & World Report ranked Top Hospitals and Health Systems. For over 70 years, Morrison has been serving some of the nation’s largest health systems and bringing a culinary, nutritional, and operational expertise that truly transforms the healthcare dining experience. Morrison has more than 1,600 registered dietitians, 1,200 executive chefs, and 31,000 professional food service team members. The company has been recognized as one of Modern Healthcare’s Best Places to Work since 2012. Job Summary Patient Services Leads are responsible to coordinate patient meal service and special requests and needs for the Patient Dining Program. Ensure that Patient Dining Associates are adequately trained and that units are properly staffed to provide service. They are a huge part of creating a culture of comfort and compassion in the healthcare environment, taking care of patients’ special requests and nutritional needs. Essential Duties and Responsibilities: • Oversees systems and processes to ensure that the strategic and operational objectives of the Patient Dining Program service are accomplished., • Supervise Patient Dining Associates and ensure they provide services that include helping patients make menu selections, assemble, and deliver/pick-up their meal trays., • Work with the caregivers and culinary team to determine menu alternatives for patients with food allergies and sensitivities; cultural, ethnic and religious preferences; or when a patient inquires about additional selections., • Interacts with nursing and evaluates on a daily basis patient meal selection, tray completion, tray delivery and tray retrieval process., • Is responsive to patients' needs at all times. Communicate problems or concerns with patients to appropriate personnel in a timely manner, following department procedures., • Assist dietitians, such as helping monitor patients who cannot eat food through their mouth, are on liquid diets or have a specific calorie count to manage., • Adhere to facility confidentiality and the patient’s rights policy as outlined in the facility’s Health Insurance Portability and Accountability Act (HIPAA) policies and procedures., • Complies with regulatory agency standards, including federal, state and JCAHO., • Follow Hazard Analysis Critical Control Point (HACCP) guidelines, a prevention based food safety system for meal assembly and distribution., • Comply with federal, state and local health and sanitation regulations, as well as department sanitation procedures., • Complete all daily, weekly or monthly reports as outlined in the Morrison Healthcare policies and procedures., • Conduct daily associate team meetings following Morrison’s branded GR8 Start Meeting guidelines and template., • Performs other duties as assigned. Qualifications: • Ability to communicate and read documents such as safety rules, procedure manuals, and operation and maintenance instructions., • Aptitude for effectively operating hospital’s admission, discharge and transfer (ADT) system, and other computer-based systems, which manage patient care records., • Full-time and part-time positions are offered the following benefits: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identify Theft Protection, Pet Insurance, and other voluntary benefits including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Morrison Healthcare is a member of Compass Group. Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Application Deadline: applications are accepted ongoing until all openings are filled for this position. If an applicant is declined due to the position being filled, they may still be considered for future opportunities and are always welcome to reapply. Morrison Healthcare maintains a drug-free workplace. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act.

Job DescriptionKeyholder - Full-Time New York City, NY - Nolita At Rothy’s, we know there’s a better way to do business, and it starts by putting the planet and its people first. More than 200 million single-use plastic bottles and 715,000 pounds of ocean-bound marine plastic have been transformed into our signature thread, creating wardrobe staples that look just as good as they feel. Striving for zero waste, we combine 3D knitting technology and handcrafted assembly to create machine washable styles that don’t compromise on comfort. From classic shoes to carry-everywhere bags, we create essentials for wherever you go. Building a sustainable future is at the heart of everything we do. We pride ourselves on fostering an inclusive environment at our HQ, retail stores and wholly-owned factory, and are growing our community every day. About the Team: Our phenomenal Retail team interacts with our customers in a super special way. Shopping at Rothy’s IRL is not your ordinary retail experience, so naturally, our staff is extraordinary too. Members of this team are experts in the fit, wear, and sizing of our shoes. They have deep knowledge of every style and out-of-this-world customer service skills. Our customers love shopping in stores due to the exceptional experiences they have with our Retail team. We’re looking for a Keyholder who has experience on the sales floor and can quickly learn our policy and procedures. If you’re organized, proactive, and looking for a customer-oriented role, this might be the role for you! What you’ll do: * Act as Manager on Duty when ASM and SM are not present. * Learn all operational procedures and assist with all customer-related inquiries on the floor * Oversee opening and closing procedures for the store * Effectively communicate Rothy’s brand story, values, and mission to our customers * Support store leadership in communicating important updates to Retail Associates * Assist in keeping the entry area, display area, and floor clean and tidy * Supervise vendors for cleaning, in-store fixtures, or updates occurring at the store * Share expert brand and product knowledge to allow customers to personally experience our style, look, and quality of our shoes * Serve as a point person for all store associate questions and relay outstanding questions or issues to store leadership (Store Manager and Assistant Store Manager) You have: * You have had 2+ years of Retail experience, preferably with a background in footwear/accessories * You have a positive attitude and a relentless focus on making sure our customers are happy * You love collaborating and working in a team environment * Availability to work full time, 5 days a week, including Fridays, weekends, evenings and holidays You are: * You are comfortable in a fast-paced, ever-changing environment * You are an excellent communicator * You are a careful listener that thinks on their feet and can provide solutions in a timely manner * Comfortable working on your feet up to 8 hours a day in a busy store environment; able to lift up to 25 pounds * 18 years of age or older Our benefits: * Medical, dental and vision insurance * 4 weeks of paid time off plus paid holidays and paid wellbeing leave * 401(k) with employer match * Flexible Spending Accounts * Commuter benefits * A product allowance (like the allowance you got as a kid only better)! * Life insurance (for you and your family) Pay Range $21.00 - $23.00 per hour Base pay is one part of the total rewards package that is provided to compensate and recognize employees for their work. This role may be eligible for additional discretionary bonuses/incentives, as well as a comprehensive benefits package. Base pay will vary based on factors such as qualifications, experience, skill level, competencies and work location. We will meet minimum wage or minimum of the pay range (whichever is higher) based on city, county and state requirements. Please see our Privacy Policy here

Job DescriptionKeyholder - Full-Time New York City, NY - Fifth Avenue At Rothy’s, we know there’s a better way to do business, and it starts by putting the planet and its people first. More than 225 million single-use plastic bottles have been transformed into our signature thread, creating wardrobe staples that look just as good as they feel. Striving for zero waste, we combine 3D knitting technology and handcrafted assembly to create machine washable styles that don’t compromise on comfort. From classic shoes to carry-everywhere bags, we create essentials for wherever you go. Building a sustainable future is at the heart of everything we do. We pride ourselves on fostering an inclusive environment at our HQ, retail stores and wholly-owned factory, and are growing our community every day. About the Team: Our phenomenal Retail team interacts with our customers in a super special way. Shopping at Rothy’s IRL is not your ordinary retail experience, so naturally, our staff is extraordinary too. Members of this team are experts in the fit, wear, and sizing of our shoes. They have deep knowledge of every style and out-of-this-world customer service skills. Our customers love shopping in stores due to the exceptional experiences they have with our Retail team. We’re looking for a Keyholder who has experience on the sales floor and can quickly learn our policy and procedures. If you’re organized, proactive, and looking for a customer-oriented role, this might be the role for you! What you’ll do: * Take ownership of store performance by actively leading on the sales floor, driving results through personal selling, and motivating the team to exceed daily and weekly sales goals. * Take ownership of store performance by actively leading on the sales floor, driving results through personal selling, and motivating the team to exceed daily and weekly sales goals. * Act as Manager on Duty when ASM and SM are not present. * Learn all operational procedures and assist with all customer-related inquiries on the floor * Oversee opening and closing procedures for the store * Effectively communicate Rothy’s brand story, values, and mission to our customers * Support store leadership in communicating important updates to Retail Associates * Assist in keeping the entry area, display area, and floor clean and tidy * Supervise vendors for cleaning, in-store fixtures, or updates occurring at the store * Share expert brand and product knowledge to allow customers to personally experience our style, look, and quality of our shoes * Serve as a point person for all store associate questions and relay outstanding questions or issues to store leadership (Store Manager and Assistant Store Manager) You have: * You have had 2+ years of Retail, Hospitality, or a customer-oriented experience * You have a positive attitude and a relentless focus on making sure our customers are happy * You love collaborating and working in a team environment * Availability to work full time, 5 days a week, including Fridays, weekends, evenings and holidays You are: * You are comfortable in a fast-paced, ever-changing environment * You are an excellent communicator * You are a careful listener that thinks on their feet and can provide solutions in a timely manner * Comfortable working on your feet up to 8 hours a day in a busy store environment; able to lift up to 25 pounds * 18 years of age or older Our benefits: * Medical, dental and vision insurance * 4 weeks of paid time off plus paid holidays and paid wellbeing leave * 401(k) with employer match * Flexible Spending Accounts * Commuter benefits * A product allowance (like the allowance you got as a kid only better)! * Life insurance (for you and your family) Pay Range $21.00 - $23.00 per hour Base pay is one part of the total rewards package that is provided to compensate and recognize employees for their work. This role may be eligible for additional discretionary bonuses/incentives, as well as a comprehensive benefits package. Base pay will vary based on factors such as qualifications, experience, skill level, competencies and work location. We will meet minimum wage or minimum of the pay range (whichever is higher) based on city, county and state requirements. Please see our Privacy Policy here

Job DescriptionCoreWeave is The Essential Cloud for AI™. Built for pioneers by pioneers, CoreWeave delivers a platform of technology, tools, and teams that enables innovators to build and scale AI with confidence. Trusted by leading AI labs, startups, and global enterprises, CoreWeave combines superior infrastructure performance with deep technical expertise to accelerate breakthroughs and turn compute into capability. Founded in 2017, CoreWeave became a publicly traded company (Nasdaq: CRWV) in March 2025. Learn more at You'll Do: On this team, you will: • Design servers, develop and review board designs., • Collaborate with exceptional engineers developing cutting-edge AI/ML hardware, • Review JDM's high speed design, including reviewing signal integrity simulations, including running your own simulations, • Review power designs and work closely with power engineers, • Conduct schematics, board design and power design reviews, • Take design from concept to mass production, • Collaborate closely with others from the development teams to build a solid quality and high performance and reliable product, • Work closely with manufacturing teams, • Actively participate in architectural discussions and providing insightful hardware design recommendations, • At least 5 years of internal design experience developing complex hardware systems with high speed design interfaces, • Strong skills in electrical board design, • Solid experience with high speed interfaces, • Required experience working with interdisciplinary teams on product design from concept to production, and experience with server technologies like thermal, mechanical, power, and signal integrity are also required., • Excellent ability to negotiate and reach consensus with developers and fellow colleagues from interdisciplinary teams, as well as excellent documentation skills, • Strong understanding of latest PCB, PCBA and system assembly manufacturing capabilities, including testing., • Strong debug skills of complex issues, • Experience in the hyperscaler space, specifically GPU systems, • Prior experience with ODM/JDM design model, • 10+ years of hardware development experience with a focus on servers, • Be Curious at Your Core, • Act Like an Owner, • Empower Employees, • Deliver Best-in-Class Client Experiences The base salary range for this role is $165,000 to $242,000. The starting salary will be determined based on job-related knowledge, skills, experience, and market location. We strive for both market alignment and internal equity when determining compensation. In addition to base salary, our total rewards package includes a discretionary bonus, equity awards, and a comprehensive benefits program (all based on eligibility). What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs, including: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment While we prioritize a hybrid work environment, remote work may be considered for candidates located more than 30 miles from an office, based on role requirements for specialized skill sets. New hires will be invited to attend onboarding at one of our hubs within their first month. Teams also gather quarterly to support collaboration California Consumer Privacy Act - California applicants only CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: . Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job DescriptionJob Title: RF Technician Job Description The RF Technician will be responsible for advanced RF testing and troubleshooting, working under minimal supervision from a Test Supervisor. The role involves testing, troubleshooting, and repairing products and returned units at the component level. The technician will report to the Customer Service Department. Responsibilities • Test, calibrate, troubleshoot, and repair new products using test procedures, schematics, wiring diagrams, and instruction manuals., • Test, calibrate, troubleshoot, and repair returned products from customers using the same procedures and manuals., • Maintain a clean and orderly work area.Essential Skills, • Experience with RF, testing, troubleshooting, and component level work., • Proficiency with testing equipment such as oscilloscopes, spectrum analyzers, network analyzers, and other laboratory test equipment., • Experience with Microsoft Word, Excel, and Outlook., • Ability to read and understand electronic specifications, schematics, and layouts.Additional Skills & Qualifications, • Minimum 2-year degree., • Experience programming microcontrollers is preferred but not required., • Avionic or military background is a plus.Work Environment The candidate will be part of a team of two, working at a bench all day troubleshooting PCBs. The work requires comfort with sitting in a chair at a bench throughout the day. The team is currently supporting a large-scale project involving the assembly and release of 25,000 handheld test units. Job Type & Location This is a Contract to Hire position based out of East Rutherford, NJ. Pay and Benefits The pay range for this position is $25.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in East Rutherford,NJ. Application Deadline This position is anticipated to close on Dec 9, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job Description Original X Productions are the operators of worldwide location-based entertainment experiences including The FRIENDS™ Experience, Hershey Super Sweet Adventure, and Harry Potter – Magic at Play. We are looking for staff who are passionate, exhibit the core values of excellence, have a commitment to safety, and value fun in everything they do. Job Summary: The Exhibit Maintenance Sr. Team Lead will be responsible for assisting with building, developing, and supervising the Tech Show Services Department. The ideal candidate has experience in various areas of technology and facilities management, with knowledge of tools and building systems. They must thrive in a fast-paced environment and have the ability to work with a variety of different personalities. They will be the MOD (Manager on Duty) for various shifts and must display leadership abilities while working as part of a team to yield goal-oriented results. This position reports to the management team and is required to assist in developing and maintaining the highest quality of safety, service, cleanliness, and efficiency of the attractions during the operational phase. A high level of Guest service must be delivered to the public every day. The chosen candidate must lead by example, demonstrating the core values of passion, excellence, safety, and fun on a day-in, day-out basis. This full-time position pays $23.00 per hour. Responsibilities: • Supervision and Team Leadership:, • Member of the MOD (Manager on Duty) rotation, • Oversee the daily operations of the experience for the duration of assigned shifts, • Lead and motivate the team to ensure high levels of performance and customer satisfaction, • Train, mentor, and support new and existing Team Members, • Assess the effectiveness of the team and provide feedback to management, • Guest Service:, • Ensure all Guests receive exceptional service and positive interactions, • Address Guest inquiries, complaints, and feedback promptly and professionally, • Facility Operations Management:, • Provide leadership and sound judgment to the Show Services Department to the benefit of the company, • Follow policies, processes, procedures, and schedules for the preventative and corrective maintenance of the facilities and attractions, ensuring compliance with manufacturer specifications, • Verify completion of daily, weekly, and monthly inspection checklists for the Show Services Department, • Oversee and participate in on-site day-to-day technical & facility services including, but not limited to: attraction’s exhibits, facility maintenance (both preventative and corrective), and custodial services, • Additional duties as assigned, • Quality Control:, • Ensure compliance with all OSHA, industry, and local regulations, • Understands and strictly adheres to Rules and Regulations established, such as the policies concerning fire, hygiene, health and safety, • Prepare for facility inspections and certifications, • Must be able to remain in standing positions more than 75% of the time, • Must be able to move about inside the exhibit space, • Frequently moves items and equipment weighing up to 50 pounds, • Constantly positions self to clean and maintain exhibit equipment, • Regularly operates audio, video, and lighting equipment, • Proven ability to work effectively as part of a dynamic team, • Outstanding customer service and communication skills, • Organized and detail-oriented, • Ability to multitask effectively, • Maintains composure under pressure and enjoys working in a fluid environment, • Excellent problem solver, • 2 years of experience as a supervisor at a large-scale public assembly facility setting., • Strong knowledge of show elements such as lighting, audio, and/or visual, • Strong knowledge of basic hand and power tools., • Strong knowledge of basic elements for critical systems (plumbing, electrical and HVAC), • High school diploma (or its equivalent), some college is preferred, • Excellent leadership and team management skills, • Health Benefits including medical, dental, and vision, • Individual Retirement Account, • Commuter Benefits, • Paid vacation and sick leave For us it’s all about the fans and creating experiences they will love. We create happiness. We are an equal opportunity employer and encourage people with disabilities and from other diverse backgrounds to apply. Powered by JazzHR jHxoGEqQ86

Job DescriptionAbout Voyant Photonics Voyant Photonics is redefining machine perception with compact, high-performance LiDAR devices that fit in the palm of your hand. Leveraging cutting-edge silicon photonic chips, our sensors deliver unparalleled accuracy in range, velocity, and reflectivity, at a fraction of the cost of traditional LiDAR systems. By transforming high-precision sensing into an accessible technology, we are enabling new applications in robotics, autonomous systems, industrial automation, and beyond. At Voyant, we are not just building products, we are advancing an industry. Our breakthrough technology bridges the gap between research and real-world deployment, making high-performance LiDAR scalable and commercially viable. The Role At Voyant Photonics, we are redefining the future of LiDAR, and we’re looking for a visionary Vice President of Engineering to lead that charge. In this role, you’ll guide our world-class engineering and test teams as we scale from breakthrough research into structured, repeatable production, transforming innovation into reliable, customer-ready products. You will be the senior, hands-on technical leader responsible for driving the transition from prototype to mass production, ensuring our products are not only innovative but also manufacturable, reliable, and scalable. The ideal candidate combines deep technical expertise in hardware and systems engineering with a proven record of delivering precision-engineered products at scale. You have led production ramp-ups through contract manufacturing and supply chain partnerships, ideally within complex, high-performance sectors such as automotive, robotics and industrial automation, smart infrastructure, AR/VR, consumer devices, or LiDAR, but we’re open to others, too. You will lead a multidisciplinary team spanning mechanical engineering, electronics, optics, firmware, and software, while working closely with the leadership team to align technology development with business objectives. Beyond the lab, you’ll engage with customers, partners, and investors, serving as a key technical voice in shaping our roadmap and driving adoption. Your role as visionary leader and your knowledge of LiDAR technology will make a difference in the capability to bring cutting-edge innovations to the mass market. You won’t just lead engineering execution, you’ll help set the standard for an entire industry. This is a rare opportunity to build, scale, and innovate at the frontier of photonics and LiDAR technology. What we’re building has never been done before. The world has been waiting for what we’re creating, a new class of machines that can see and understand the world with unprecedented accuracy and scalability. Through our novel design and system-level innovation, we’re unlocking a future where intelligent perception is no longer a limitation, but a foundation for what comes next. Location: New York City, NY (on-site). We offer relocation assistance and are flexible in supporting your transition to New York City. Key Responsibilities * Own and drive hardware engineering across electronics, mechanical assembly, optics, and embedded systems to deliver scalable, high-performance LiDAR solutions. * Lead the transition from R&D and prototyping to full-scale mass production, ensuring reliability, cost-effectiveness, and manufacturability. * Ensure engineering deliverables are aligned with product requirements and customer needs. * Develop and implement best-in-class engineering processes, including requirements management, design validation, and rigorous product lifecycle management. * Drive system-level technical decisions on engineering tradeoffs, balancing performance, manufacturability, cost, and timelines * Build and develop a cross-disciplinary engineering team to bring a first-of-its-kind product to market * Manage production ramp-up, scaling from low-volume sample assembly to 1,000+ units per month through contract manufacturing. * Drive technical alignment with the product roadmap, balancing innovation with execution and delivery timelines. * Collaborate with leadership across product, sales, and operations to ensure alignment between technical and business objectives. Required Qualifications * 10+ years of experience leading engineering teams in hardware and software product development. * Proven track record of shipping complex electronic hardware at scale. * Experience in development, testing and validation of LiDAR sensors. * Experience in high-volume product development at an established company (consumer electronics, automotive, robotics, or similar). * Expertise in contract development and manufacturing, outsourcing and offshore supply chains. * Strong leadership skills with the ability to inspire, mentor, and grow a world-class engineering team. * Proven track record of large, multidisciplinary teams management delivering technology to mass production. * Deep technical knowledge in system architecture, hardware design, and embedded software. * Experience driving New Product Introduction (NPI) and scaling production lines. * Bachelor’s or Master’s degree in Engineering or a related field. Preferred Qualifications * Experience with high-reliability or extreme-environment design (e.g., automotive, aerospace, defense). * Familiarity with functional safety standards (ISO 26262, IEC 61508, or similar). * Background in photonics, optics, or semiconductor-based sensing technologies. * Prior experience leading engineering at an early-stage startup, scaling from prototype to mass production. Compensation & Benefits * Competitive salary and meaningful equity package * Comprehensive health benefits (Medical, Dental, Vision) * Unlimited PTO and paid company holidays * Flexible work environment (Hybrid or remote with travel) * Team events and company meetups Equal Opportunity Employer Voyant Photonics is an equal opportunity employer committed to building a diverse and inclusive workplace. We welcome applicants from all backgrounds and do not discriminate based on race, color, religion, gender, gender identity or expression, sexual orientation, pregnancy, marital or partnership status, age, national origin, citizenship, veteran or military status, disability, medical condition, genetic information, caregiver status, or any other characteristic protected by law.

Job Description INSTALLER / FOREPERSON BROOKLYN GRANGE DESIGN/BUILD/MAINTENANCE DEPARTMENT LOCATION: NYC JOB TYPE: FULL TIME YEAR ROUND (EXEMPT) ABOUT THE POSITION: Brooklyn Grange seeks an experienced builder and installer to join our Design/Build/Maintenance department, which is charged with the design, construction, and maintenance of varied green spaces. This position will support the Lead Installer in executing urban landscape and hardscape projects. Key responsibilities include assisting with the onsite construction of landscaping and hardscaping, following construction-related drawings, and working as part of the crew to ensure safe, efficient, and high-quality installations. The Installer is a skilled builder with experience in hardscaping, construction, and preferably landscaping and other trades projects. The ideal candidate is motivated, reliable, and a creative problem solver who can uphold Brooklyn Grange’s standards throughout all phases of a green space buildout. Applicants should be positive and passionate about green spaces and sustainability, and should have experience contributing to construction projects from initial load-in to final punch list. The Installer will report directly to the Lead Installer and work under their guidance. SCHEDULE: The Installer’s schedule will consist of Monday through Friday work, approximately 40–45 hours per week. Installations typically begin at 7:00AM. The role is year round. KEY RESPONSIBILITIES: * Assist with the construction of professional hardscape and landscape installations, including decks, fences, pergolas, pavers, planter boxes, patios, green roof systems, etc. * Manage onsite construction and landscaping teams, safely according to OSHA guidelines. * Review and follow project documents, drawings, designs, and materials specs under the guidance of the Lead Installer and leadership of Design/Build/Maintenance * Work closely with and support the Lead Installer to help keep projects on track and maintain high-quality standards. * Contribute to a positive, safe, and collaborative work environment within the Installations team * Help identify and communicate potential issues to the Lead Installer to ensure successful and safe project execution Perform material/tool inventory; assist with plant runs, tool restocking, and vehicle load-ins and load-outs * Communicate clearly and professionally with teammates, leadership, and clients as directed by the Lead Installer * Maintain orderly and safe workspaces in compliance with OSHA and NYC DOB safety standards * Perform other work as needed, including infrastructural/facility projects at Brooklyn Grange’s own locations THE IDEAL CANDIDATE: * Has 3-5+ years of experience installing hardscaping, carpentry, etc * Can read, understand, and follow construction documents * Has hands-on experience with a range of construction materials and techniques * Is an experienced builder, with knowledge of general assembly techniques, light machinery, power tools, and carpentry skills * Is positive, energetic, and has a strong work ethic; can work well within a crew setting * Is organized, dependable, and has strong communication skills * Holds a valid driver’s license and is comfortable driving large vehicles in the city * Can lift 50 lbs. repeatedly, and can squat, kneel, bend over, and reach for extended periods of time; can undertake the repeated physical labor of landscaping work required of the position * Has attended a minimum of OSHA 30-hour training sessions, and holds an additional 10 hours of SST training (total 40 hours Site Safety Training required prior to start date) * Knowledge of irrigation systems not required, but is a plus * Certification to drive a forklift a plus, but not required Ability to communicate in Spanish a plus, but not required WHAT WE’RE OFFERING: * A progressive work environment as part of a small and enthusiastic team * Annual Salary of $80,000 – $90,000 per week, commensurate with experience (this is an exempt position) * Generous Paid Time Off; Floating Holidays as eligible * Comprehensive Medical, Dental, and Vision insurance * Participation in the company’s life insurance plan, with option for additional coverage amounts * Participation in the company’s retirement benefit * Employee Assistance Program to support overall mental wellbeing, caregiving assistance, and other benefits * Discounted Employee CSA offering * Discounts to Brooklyn Grange events and workshops, and access to NYC’s most delicious vegetables when in season TO APPLY: * Include resume and cover letter. * Applications will be accepted until the position is filled. Brooklyn Grange is committed to supporting a diverse and multicultural team, and fostering an inclusive workplace. We consider all individuals for employment without regard to race, religion, age, sex, gender, disability, national origin, alienage or citizenship status, sexual orientation, familial status, military status, or any other characteristic protected by applicable federal, state, or local law. If you don’t meet every requirement of this position, but you are excited about the role and your past/lived experience meet some of the requirements, we encourage you to apply. We strongly encourage applications from candidates of all backgrounds.

Job Description About us: From innovative menus and striking design to impeccable service and critical attention to detail, at Great Performances, we weave our mission into all we do. This woman-owned business serving New York City for over four decades has evolved from a waitress staffing agency to the leading catering, events, and hospitality companies in the greater New York area. We provide food services in an array of celebrated New York City cultural institutions including Jazz at Lincoln Center, Brooklyn Museum, Brooklyn Academy of Music, Wave Hill, and The Apollo Theater. We are known for full-service catering and events, corporate workplace dining and amenity programs, and large-scale event and festival production. Great Performances is the nation’s first caterer to own and operate an organic farm, Katchkie Farm located in Kinderhook, NY. Progressive from the start, we consistently set the pace for industry best practices. We are seeking highly motivated and talented individuals to join our team and to support our vision, mission, and values through everything they do. If you share our passion and want to make a meaningful impact, we invite you to apply. Our Vision: Building Community to Better Our World Our Mission: Unleash Joy through Genuine Hospitality Our Core Values: Craftsmanship: developing new menus, designs, and moments to deliver engaging experiences to our clients and guests. People: creating fair access, opportunity, and advancement for everyone. Our employees are our greatest asset. Sustainability: upholding and elevating standards for sustainable behaviors that support our planet. Collaboration: aligning with our clients’, colleagues’, and community’s visions to execute a successful experience. Doing Good through Food: engaging in action around food access, health and wellness, education, and philanthropy. We are currently seeking responsible drivers to join our Home Delivered Meals Program. This role involves ensuring the efficient, effective and professional delivery of meals to homebound seniors, as well as reviewing paperwork to ensure accuracy and correspondence with all deliveries. Responsibilities: • Ensure the health, safety, and well-being of clients during delivery operations, • Strong interpersonal skills for face-to-face client services interactions, • Capability to monitor client’s needs effectively, • Ability to maintain proper temperature of meals during transportation, • Skillfully and responsibly operate a motor vehicle in accordance with safety regulations and company policies, • Proficiency in meal assembly at each delivery stop, • Knowledge of proper food handling techniques, • Familiarity with emergency procedures and protocols, • Assist in loading company vehicle with pack-out and all other items for delivery, • Ensure that packed load is secure and ready for transport, • Maintain the cleanliness of company vehicles, warehouse, and loading dock spaces; clean racks, throw away trash, sweep, and remove empty boxes, etc., • Inform the Director of Dispatch and Delivery Operations of any discrepancies found on event paperwork, • Minimum 1 year of prior NYC driving experience, • Must hold a valid driver's license, specifically a regular license for a car, a Class D or E license for a van weighing 26,000 lbs. or less, or a commercial license A or B for vehicles weighing 26,001 lbs. or more., • Applicants who present an out-of-state license upon hiring and are residents of New York State must obtain a New York State license within 30 days of becoming a permanent resident. Staff residing out of state but working in New York State may utilize their out-of-state license, provided it meets the license requirements outlined in this section., • Be a team player with a positive attitude, • Must be flexible to workdays, evenings, weekends and holidays, • Driver Medical Certification a plus, • Familiarity with NYC roadways, • Must be able to lift objects to 50 lbs. and stand for at least 8 hours a day, • Demonstrates a commitment to goals, a "can do" attitude and approach to problems, and persistence in the face of adversity, • Exhibits a polite, respectful, and supportive attitude toward clients, homebound seniors, and colleagues, while consistently delivering exceptional performance. Location: 2417 3rd Avenue, Bronx, NY 10451 Salary: $21.00/hour Job Type: Full-time Benefits: PTO, Medical, Dental, and Vision insurance, Transit, and FSA (Flexible Spending Account) Must be able to provide valid documentation that you are legally eligible to work in the United States. Great Performances is an equal opportunity employer. At Great Performances, we employ qualified individuals based solely on ability, training, and experience. Great Performances does not discriminate against any employee or applicant for employment or promotion based on race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law.

Job DescriptionCompany Description Metropolis Logistics LLC is an Amazon DSP dedicating to providing excellent delivery services out of Amazon Warehouse HNY5. We are looking for motivated individuals to join our team as DOT Delivery Drivers. Location: HNY5 at 125 North Street, Teterboro, NJ 07608 Apply now to schedule your in-person interview! Job Description Compensation: $23.25 per hour (DOT driver) Shift Time(s): Sunday - Saturday, Starting daily at 9:45 am to route completion Why You'll Love Working for us • Uniforms and safety shoes provided at no cost to the Employee, • Competitive wages plus overtime, • On-the-job training and opportunities for career advancement, • As a Delivery Driver, you’ll drive a DOT regulated box truck delivering 60 - 70 packages a day, • Handle large bulky products utilizing proper equipment with weights ranging from 50 - 300 LBS (team lift), • Work 3 or more days per week and up to 10 hours per day including breaks with shifts available 7 days a week, • Interact with Amazon customers and the public in a professional and positive manner, • Safely deliver packages while adhering to all safety and quality standards, • Some package deliveries include assembly and installationQualifications What You’ll Need • Must be at least 21 years old (Driver role) with eligibility to work in the United States, • Must have a valid driver's license (Deliver Driver role; Non CDL Driver’s License ok) or valid form of identification (Driver Helper role), • Adhere to yard safety policies, obey all applicable traffic laws, and drive in accordance with weather/road conditions, • Must be fluent in English, • Current DOT Medical Certificate preferred Additional Information All your information will be kept confidential according to EEO guidelines.