Trabajos process operator en Syracuse, New YorkCrear alertas

Job Description Join a team that nourishes life from farm to table! Upstate Niagara Cooperative, proudly owned by 200+ local family farms, is one of America’s largest and most stable dairy cooperatives. Guided by farmer- and employee-led values, we process and market high-quality milk, yogurt, dips, sour cream, cottage cheese, and more under our trusted brands: Upstate Farms®, Bison®, Milk for Life®, and Intense Milk®. Here, you’ll support sustainable farming, strong communities, and the mission to deliver fresh, local dairy to families every day. Skilled Labor openings may include the following positions – Processor Operator. These positions can include the responsibility of setting up, operating and cleaning equipment responsible for turning raw milk product store ready and also the responsibility of setting up, operating and cleaning equipment that manufactures plastic bottles for finished milk product. All qualified, responsible applicants are encouraged to apply. We offer a competitive salary and generous paid time off. Must be able to work, weekends and Holidays. Essential Duties and Responsibilities: • Batch products; record required information on form documents, regulatory charts and operational/cleaning checklists maintaining 100% accuracy., • Must follow all SOP procedures and complete required documentation/checklists. Participate in continuous improvement efforts to improve products, services, or processes., • Maintains area cleanliness, reports leaking or out of spec product and participate in waste reduction efforts., • Follow all Safety requirements to include, Housekeeping, Lock Out/Tag Out, PPE and engage in facility safety efforts., • Ensure compliance with all OSHA, NYSDA, PMO, FDA, and assist in maintaining SQF readiness, and HACCP., • Ability to work in an environment with cold temperatures, noise and uneven walking surfaces., • Clean, set up, operate, and monitor specified process equipment and systems Education and Experience: • Must be able to pass a pre-employment background and drug screen, • Minimum of a GED or High School diploma Must be a minimum of 18 years of age • Skilled in Mechanical aptitude, (I.e. Set up, teardown physical connections), • Applicants must be available to work all hours (all shifts) as well as weekends and holidays, • Ability to meet company policy for attendance and work schedule requirements Expectations: • Ability to stand/walk for long periods of time, operator in varied temperature ranges, perceive distance and distinguish color., • Ability to handle intermittent periods during which continuous physical exertion is required, such as stooping, bending, climbing, and lifting material or equipment., • Perform other duties as assigned. Pay: Processor Operator - $23.00-28.00 one-year progressive pay scale • The salary range listed for this position represents the good faith and reasonable minimum and maximum pay for this role at the time of posting. Actual compensation may vary based on factors including, but not limited to, experience, skills, training, knowledge, education, and overall qualifications. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays. Upstate Niagara Cooperative, Inc. is committed to equal employment opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job Description Armstrong has an opening for a first shift Utility Operator. Armstrong Rapid Manufacturing has been in business for over 50 years in the East Syracuse NY area. Armstrong specializes in both prototyped and low volume production machined castings. Armstrong has a benefit package that includes paid holidays, bonus and referral programs, paid vacation, 401K, 100% company paid life insurance, sick time, supplemental short term disability insurance, dental, medical, vision, accident, cancer and critical care insurance plus safety awards. We also provide free coffee daily for our employees available at multiple coffee kiosks. Our website is www.armstrongrm.com and it shows many of the exciting aspects of our company! Take a look! The Salary Range for our Utility Operator job is $ 17.00-$ 20.00 per hour with the job description below: Summary/Objective: Performs a utility operation function which includes preparing shipments, grit blasting parts, finishes molded parts to customer specifications, plastic injection molding molding or additional tasks as required. Job Responsibilities • Assists in Shipping to prepare shipments as needed, • Grit blasts plastic molded parts as required using the grit blaster machine., • Performs plastics molding and additional plastics department functions as trained for and required., • Performs secondary operations tasks such as but not limited to using fixtures where required, drills holes, and taps with flexarm, cordless drills, air operated drills, and operates Anilam machine to machine parts etc., • Mix filler and hardener per instructions., • Inspect parts and fill voids., • Using sandpaper, straight drill, and sander, finish parts per job instructions., • Verify counts, read job travelers, and route parts to the next location., • Meet quality and quantity standards for the position., • Proactively supports the ISO process approach to quality management and the Syteline MIS system, • Accomplishes organizational goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments., • Adheres to all safety policies and practices, consistently uses personal protective equipment, and practices good housekeeping., • Maintains regular on time attendance and adheres to company policies, procedures, and standards of conduct., • Applies classroom and on the job post training information, knowledge, skills, and abilities consistently in a quality-oriented manner (wherein the KSAs are part of the jobs tasks, duties and other tasks as requested)., • Performs other tasks as directed. Educational, Experience Based, and Skill Qualifications • High school graduate or equivalent with manual dexterity. 6 months' experience in a surface finishing function preferable., • Ability to read job travelers/job specifications., • Strong attention to detail. Physical Requirements Ability to sit for extended time periods, reach and grasp parts/hand tools and lift up to and including 35 pounds as needed. EEO Statement Armstrong Mold Corporation is committed to equal opportunity, to providing a work environment that is free from unlawful discrimination and will not discriminate with regard to race, religion, color, national origin, sex, age, veteran status, disability, genetic information, or any other protected status. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, age, veteran status, disability, genetic information, or any other protected status. Armstrong Mold Corporation is proud to be an Equal Opportunity Employer (EOE). Armstrong Mold Corporation will make reasonable accommodation(s) for qualified applicants with disabilities and employees* If you are interested in applying for employment and feel you need a reasonable accommodation to apply for a posted position, or are an employee with a question contact Human Resources at 315-437-1517 or by email to hr@armstrongrm.com. • unless an employee reasonable accommodation would result in undue hardship. Job Posted by ApplicantPro

Job Description As employees of a farmer-owned cooperative, we come to work every day trying to honor the tireless effort and care these farming families put in every day, all day, 365 days a year. Our farmer-owners tend to think in generations, with some of our farms being run by the same families for over a century. We carry this approach into our business, knowing that each and every one of us makes a difference in allowing these generational traditions to continue, taking pride in knowing that we nourish our friends, neighbors, nation, and even the world with healthy and delicious dairy products. Our products include milk, flavored milk, yogurt, dip, sour cream, cottage cheese, and ice cream mix marketed under the Upstate Farms®, Bison®, Milk for Life®, and Intense Milk® brands. Skilled Labor openings may include the following positions – Filler Operator. This position can include the responsibility of setting up, operating and cleaning equipment responsible for turning raw milk product store ready and also the responsibility of setting up, operating and cleaning equipment that manufactures plastic bottles for finished milk product. All qualified, responsible applicants are encouraged to apply. We offer a competitive salary and generous paid time off. Must be able to work, weekends and Holidays. Essential Duties and Responsibilities: • Batch products; record required information on form documents, regulatory charts and operational/cleaning checklists maintaining 100% accuracy., • Must follow all SOP procedures and complete required documentation/checklists. Participate in continuous improvement efforts to improve products, services, or processes., • Maintains area cleanliness, reports leaking or out of spec product and participate in waste reduction efforts., • Follow all Safety requirements to include, Housekeeping, Lock Out/Tag Out, PPE and engage in facility safety efforts., • Ensure compliance with all OSHA, NYSDA, PMO, FDA, and assist in maintaining SQF readiness, and HACCP., • Ability to work in an environment with cold temperatures, noise and uneven walking surfaces., • Clean, set up, operate, and monitor specified process equipment and systems Education and Experience: • Must be able to pass a pre-employment background and drug screen, • Minimum of a GED or High School diploma Must be a minimum of 18 years of age • Skilled in Mechanical aptitude, (I.e. Set up, teardown physical connections), • Applicants must be available to work all hours (all shifts) as well as weekends and holidays, • Ability to meet company policy for attendance and work schedule requirements Expectations: • Ability to stand/walk for long periods of time, operator in varied temperature ranges, perceive distance and distinguish color., • Ability to handle intermittent periods during which continuous physical exertion is required, such as stooping, bending, climbing, and lifting material or equipment., • Perform other duties as assigned. Pay: $19.00-24.00/hr.* *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position’s qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays. Upstate Niagara Cooperative, Inc. is committed to equal employment opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job Description Seal & Design is a family-owned company founded and headquartered in Clarence, NY with five divisions located across the U.S. and Canada. Our product line includes gaskets, o-rings, seals, molded rubber and plastics, die-cut foams, and many other products for a wide array of sealing applications. We provide superior products to our customers across many industries, including: Automotive, Medical, Military & Defense, Aerospace, Electronics, Power Generation, Hydraulics, and HVAC. Seal & Design’s customer focused attitude allows us to exceed customers’ expectations. We are world-class. To learn more about us visit www.sealanddesign.com and view our recruiting video at https://youtu.be/Bae9usXohso. Shift: Monday - Thursday 2:15PM - 12:45AM Pay: $24.00 - $28.00/hour + $1.00 shift differential RESPONSIBILITIES: • Operate various production machinery safely and in compliance with company policies and procedures, • Remain flexible and adaptable to changing assignments, production demands, and department needs throughout the workday, • Execute job tasks according to specifications outlined on the job card, • Accurately record job start and completion times, material usage, and production data, • Conduct first-piece and in-process inspections to verify compliance with job requirements and quality standards, • Notify the Lead Operator or Quality Control of any quality concerns and pause production until the issue is resolved; escalate unresolved issues to the Plant Manager, • Perform routine preventative maintenance on equipment as required, • Maintain a clean, organized, and safe work environment throughout the shift, • Adhere to all safety, security, and operational procedures, • Meet or exceed established productivity, efficiency, and quality targets, • Actively participate in cross-training on all applicable machinery and production processes to build versatility and support operational coverage across departments Requirements • High school diploma or equivalent required, • Six (6) months to two (2) years of job-specific experience, • Experience working in a computer-based environment with business or ERP software, • Basic math and measurement proficiency, • Ability to read and interpret blueprints and technical drawings, • Strong mechanical aptitude, • Demonstrated flexibility and willingness to cross-train across multiple machines, jobs, and production areas PHYSICAL REQUIREMENTS: • Ability to lift up to 50 lbs., • Continual use of hands; constant standing, walking, reaching, bending, pulling and lifting, • Clear close vision and ability to identify and distinguish color variations Benefits • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Referral program, • Vision insurance

Job DescriptionAbout the Company At Current, everything starts with people. We partner with leading accounting firms across the United States, bringing them together through a shared platform that supports their growth while preserving the local identities and client relationships that make each firm unique. Our partner firms combine the close connections of a local team with the resources of a national community, giving professionals access to broader career opportunities, learning, collaboration, and innovative technology. Whether you join Current or one of our partner firms, you’ll be part of a connected team investing in your development and shaping the future of accounting. About the Role The Chief Operating Officer (COO) is a key executive leader responsible for building the “firm of the future” — combining best-in-class professional services operations with process engineering, data/AI enablement, and modern technology to deliver a step-change in client experience, margin, and scalability. This is a hands-on operator who can: Translate strategy into operating cadence, measurable outcomes, and sustained execution Engineer and standardize end-to-end workflows across service lines Lead technology-enabled transformation (AI, automation, workflow, data, client-facing platforms) Influence partners and senior stakeholders through change while strengthening culture and client trust Key responsibilitiesOperating model & performance leadership Own firmwide operations across offices and functions; ensure consistent execution and a high-accountability culture. Establish an operating cadence: weekly metrics reviews, monthly business reviews, quarterly planning, and clear ownership of initiatives. Define and manage KPIs that matter (capacity utilization, cycle time, SLA adherence, quality/rework, realization, NPS/CSAT, talent retention). Identify constraints to growth and remove bottlenecks through systems, process, and org design. Transformation, process engineering & continuous improvement Map and redesign end-to-end workflows (onboarding → delivery → review → billing → renewal) with a focus on speed, quality, and scalability. Build a lean/process-improvement capability inside the firm (standards, playbooks, training, continuous improvement loops). Standardize SOPs, templates, and controls to ensure quality and compliance while enabling delegation/offshoring where appropriate. Technology & AI enablement Partner with leadership to define a practical tech roadmap (workflow tools, practice management, document management, data platforms, client portals, AI copilots/agents). Lead change management for technology adoption: pilot, measure, refine, and scale. Establish governance for AI use (risk, privacy, compliance, review controls) in collaboration with Risk/Compliance and IT. Drive automation of routine work and elevate the team to higher-value advisory activities. Stakeholder leadership & change management Serve as a trusted advisor to partners and practice leaders; influence without relying on authority. Align cross-functional teams (Tax, Audit/Assurance, CAS, Advisory, Client Service, HR, IT, Finance) around shared outcomes. Communicate clearly and consistently: what is changing, why, when, and how success will be measured. Reinforce a culture of excellence, learning, innovation, and client-first delivery. Talent, organization & shared services Build and develop a high-performing operations leadership bench (ops, client service operations, PMO, enablement). Partner with HR to design scalable org structures, role clarity, performance systems, and training. Oversee shared services and operational infrastructure (HR Ops, IT Ops, Finance Ops, Admin) as applicable; ensure service levels and reliability. Integration (as relevant) Support integration of acquired practices into the flagship operating model (process, technology, operating cadence, and culture). Create repeatable integration playbooks and “day 1 → day 90” execution plans. Ideal candidate profile 12+ years of operational leadership in professional services (accounting, consulting, legal, or adjacent), with responsibility for multi-team execution. Proven track record leading technology-enabled transformation (workflow modernization, automation, data/analytics, AI enablement). Strong process engineering mindset (Lean/Six Sigma or equivalent experience welcomed but not required). Able to operate at both executive altitude (strategy, stakeholder influence) and in the details (process mapping, metrics, adoption). Demonstrated ability to lead change in partner-led or matrixed environments. Excellent communication, facilitation, and conflict navigation skills. High judgment around risk, quality, and compliance in regulated professional services. Preferred (not required) Experience in PE-backed platforms, roll-ups, or multi-site professional services organizations Experience building a delivery model that uses shared services / global delivery effectively CPA, MBA, or other relevant credential Working style Results-first, metric-driven operator who builds durable systems Comfortable in ambiguity; can structure problems and drive execution Collaborative, low-ego leader who raises the bar while bringing people along Curious and pragmatic about AI and technology — focused on adoption and outcomes, not hype What success looks like (12–24 months) Core delivery workflows are documented, measured, continuously improved, and scalable across offices The firm operates with clear operating metrics and predictable throughput (capacity, cycle time, quality) AI/automation is embedded into daily work in a controlled, compliant way — improving quality and freeing capacity Client experience is measurably stronger (responsiveness, proactive insights, consistency) A repeatable operating model is established and ready to export to other firms Compensation & Benefits The total rewards package at Current includes base salary and benefits. Our salary ranges are competitive within the accounting industry and are updated regularly using the most reliable compensation survey data for our industry. New hire offers are made based on a candidate’s experience, expertise, geographic location, and internal pay equity relative to peers. We provide a robust benefits package, including: Health, Dental, and Vision Insurance (with options for fully paid employee only coverage for health and dental) Company-Paid Life and Long-Term & Short-Term Disability Insurance Ancillary Benefits such as supplemental life insurance, critical illness, and accident insurance Classic Safe Harbor 401(k) Plan with employer contributions Opportunities for professional growth, learning, and development including access to Becker and LinkedIn Learning Equal Opportunity We are an equal opportunity employer, and we do not discriminate on the basis of race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability, genetic information, or any other applicable legally protected characteristic. Compensation Range: $240K - $300K

Controller (Family Office) • $170,000 - 210,000 Base Salary + Bonus, • Fully Remote. Occasionally Travel to meet with Family to discuss finances (NY/NJ Area), • .High Profile Family. Your job will be split between their FO and Foundation. You'll be responsible for all Accounting/Ops/Compliance. This role is not Fund or Investment Accounting. True Needs: • Hands-on controller who has personally run full cycle accounting/QBO recently, • Multi-entity experience, • Strong ops/admin range (payroll, bill pay, reimbursements, insurance, compliance), • Family office, private wealth, or foundation exposure a plus, • CPA or equivalent hands-on controller experience, • Automation/AI mindset a plus About the Opportunity Our client is seeking a highly organized, hands-on, and entrepreneurial Controller to manage and optimize the internal financial infrastructure for a lean, high-growth Family Office and global Foundation. This role is designed for an operator who excels in a direct-support environment to a high-net-worth principal. The ideal candidate will seamlessly balance corporate accounting, foundation compliance, and personal financial management with a high degree of precision, discretion, and operational ownership. Key Responsibilities Financial Operations & Management • Full-Cycle Accounting: Manage daily general ledger operations, monthly/quarterly/annual closes, bank reconciliations, accruals, and financial statement preparation (Balance Sheet, Income Statement, Cash Flow)., • Accounts Payable & Cash Management: Oversee all bill pay, wire transfers, ACH payments, and expense management, ensuring proper coding and record-keeping., • Payroll Processing: Execute bi-weekly payroll for core office staff and handle necessary payroll journal entries and reconciliations. Personal Finance & Foundation Compliance • Principal Personal Finances: Manage all accounting, personal expense tracking, travel policy oversight, and credit card/reimbursement processing for the Principal., • Foundation & Compliance: Oversee foundation accounting, tracking grant distributions, coordinating annual audits, and preparing materials for tax filings (including Form 990-PF / 4990 compliance)., • Vendor & Tax Liaison: Serve as the primary operational contact for external tax accounting firms, auditors, insurance brokers, and legal partners. Process Automation & Systems • Systems Maintenance: Utilize and manage core accounting software platforms (QuickBooks Online, payroll tools, and expense/AP systems., • Workflow Automation: Identify opportunities to automate manual workflows, build clean data feeds, and improve reporting efficiency across entities. Candidate Qualifications Experience: 7-10+ years of progressive accounting experience, with demonstrated ownership in a Family Office, single-founder business, high-net-worth personal finance seat, or boutique accounting firm setting. Technical Skills: • Deep proficiency in QuickBooks Online (QBO) and modern financial technology tools., • Accounting Rigor: Hands-on multi-entity accounting background with a clear understanding of general ledger mechanics, tax compliance, and payroll processing. Big 4 or public audit background is a strong plus., • Execution Focus: A true "operator" mindset—someone who embraces hands-on execution (data entry, reconciliations, bill pay) rather than solely managing external teams., • Communication & Discretion: Exceptional attention to detail, strong communication skills, and absolute discretion when handling sensitive financial and personal data., • Credentials: CPA or CPA candidate preferred, but relevant hands-on operational track record is paramount. By submitting to this position, you are agreeing to be included in our talent pool for future hiring for similarly qualified positions. Equal Opportunity Notice Highspring LLC (d/b/a Vaco by Highspring) and its parents, affiliates, and subsidiaries ("we," "our," or "Vaco by Highspring") are committed to the full inclusion of all qualified individuals and does not discriminate against any employee or applicant for employment because of race (including but not limited to traits historically associated with race such as hair texture and hair style), color, sex (includes pregnancy or related conditions), religion or creed, national origin, citizenship, age, disability, status as a veteran, union membership, ethnicity, gender, gender identity, gender expression, sexual orientation, marital status, political affiliation, or any other protected characteristics as required by applicable law. The company is also committed to ensuring that persons who need them are provided with reasonable accommodations; if an accommodation is needed to participate in the job application or interview process, please contact HR@vaco.com . Vaco by Highspring also wants all applicants to know their rights that _. Representation Notice By submitting to this position, you agree that you will be giving Vaco by Highspring the exclusive right to present your as a candidate for the foregoing employment opportunity. Additionally, you agree to be included in our talent pool for future hiring for similarly qualified positions. You further agree that you have represented information about yourself accurately and have not affirmatively misrepresented your qualifications. Lastly, you agree to maintain as confidential, to the fullest extent permitted by law, any information you learn from Vaco by Highspring about the position and you will limit disclosure of information about the position only to the extent necessary to perform any obligations in furtherance of your application. In exchange, Vaco by Highspring agrees to exercise reasonable efforts to represent you through all solicitation, job screening and resume dispersal. For residents of Ontario, Canada only: to the extent the position for employment is not with Highspring or not otherwise noted as vacant above, candidate should be informed that this role is to replace a presently employed person at Vaco by Highspring's client. Privacy Notice Vaco by Highspring respects your privacy and are committed to providing transparent notice of our policies. • California residents may access Vaco by Highspring HR Notice at Collection for California Applicants and Employees _., • Virginia residents may access our state specific policies _., • Residents of all other states may access our policies _., • Canadian residents may access our policies in English and in French ., • Residents of countries governed by GDPR and UK GDPR may access our policies _. Additionally, submissions to this position are subject to the use of AI to perform preliminary candidate screenings, focused on ensuring minimum job requirements noted in the position are satisfied. More details about Vaco by Highspring's use of AI can be found here (_). Further assessment of candidates beyond this initial phase will be conducted by recruiters and hiring managers. Vaco by Highspring does not know and cannot opine on if its client's use of AI products in hiring. Pay Transparency Notice Determining compensation for this role (and others) at Vaco by Highspring depends upon a wide array of factors including but not limited to: · the individual's skill sets, experience and training; · licensure and certification requirements; · office location and other geographic considerations; and · other business and organizational needs. With that said, as required by local law, Vaco by Highspring believes that the following salary range referenced above reasonably estimates the base compensation for an individual hired into this position in geographies that require salary range disclosure. The individual may also be eligible for discretionary bonuses and/or participation in medical, dental, and vision benefits as well as the company's retirement plan (or similar retirement benefits).

Job Description Armstrong has an opening for a first shift CNC Programmer. Armstrong Rapid Manufacturing has been in business for over 50 years in the East Syracuse NY area. Armstrong specializes in both prototyped and low volume production machined castings. Armstrong has a benefit package that includes paid holidays, bonus and referral programs, paid vacation, 401K, 100% company paid life insurance, sick time, supplemental short term disability insurance, dental, medical, accident, safety awards, cancer and critical care insurance. We also provide free coffee daily for our employees available at multiple coffee kiosks. Our website is www.armstrongrm.com and it shows many of the exciting aspects of our company! Take a look! The Salary Range for our non-exempt CNC Programmer job is $35.00-$40.00 per hour with the job description below: Summary/Objective: The CNC Programmer prepares detailed manufacturing instructions and programming data to produce machined parts and sub-assemblies using horizontal and vertical CNC machining centers to meet engineering drawings and specifications. The CNC Programmer determines manufacturing procedures and operation sequencing and establish tooling, gauging, and machine requirements to fabricate parts and sub-assemblies for various products, primarily from aluminum castings with some aluminum billet machining. In addition, the CNC Programmer spends time in the machine shop solving problems and improving processes in a team environment. Job Responsibilities • Creates medium to high complexity CNC programs using three+ axis CAM software., • Works offline to produce a robust CNC program maximizing software capabilities that will simulate accurately at the PC avoiding collisions and excess time at the work center., • Provides CAM support, downloads programs to CNC controls, makes or supports in the initial set up/prove out, obtaining of first piece approval and turns over production of part to operator., • Diagnoses, analyzes, and troubleshoots programs., • Assures compatibility of engineering drawings and specifications with manufacturing and fabrication capabilities by reviewing drawings and making suggestions for changes and revisions to enhance productivity., • Reprocesses and/or modifies existing programs for increased efficiency and productivity., • Originates studies directed towards more efficient manufacturing of parts. Including recommendations for changes in equipment, process methods, materials, and designs., • Works with Quality to create a robust CMM/manual inspection process., • Completes and/or maintains required reports and records i.e. CNC tooling lists., • Creates work and setup instructions for machinists., • Checks completed programs/changes by running simulations prior to posting code., • Ensures correct speeds and feeds based on manufacturer cut data., • Proactively supports the ISO process approach to quality management per our system requirements., • Adheres to all safety policies and practices, consistently uses personal protective equipment and practices good housekeeping., • Maintains regular on-time attendance and adheres to company policies, procedures, and standards of conduct., • Maintains a positive professional approach with all internal and external controls., • Applies classroom and on the job post training information, knowledge, skills, and abilities consistently in a quality-oriented manner (wherein the KSAs are part of the jobs tasks, duties and other tasks as requested)., • Willingness to do other tasks as required. Educational, Experience Based, and Skill Qualifications A.A.S in Mechanical technologies or equivalent work experience and demonstrated ability to program and machine complex geometries. Four (4) years of CNC programming experience desirable preferably with Master Cam. • Must have superior computer programming skills., • Must have excellent reading comprehension skills., • Good math skills, especially algebra, trigonometry, and physics., • Must have good problem-solving skills., • Must have excellent time management skills., • Must have good organizational and planning skills., • Must have excellent written and verbal communication skills., • Must be highly detail oriented., • Must be able to work effectively with little or no supervision., • Must have the ability to read blueprints., • Knowledge of safety measures pertinent to each job assignment Physical Requirements A combination of walking and sitting at a desk for prolonged periods of time. Must be able to lift up to and including 35 pounds as needed. EEO Statement Armstrong Mold Corporation is committed to equal opportunity, to providing a work environment that is free from unlawful discrimination and will not discriminate with regard to race, religion, color, national origin, sex,gender, gender identity or expression, sexual orientation, age, veteran status, disability, genetic information, or any other protected status. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, gender, gender identity or expression, sexual orientation, age, veteran status, disability, genetic information, or any other protected status. Armstrong Mold Corporation is proud to be an Equal Opportunity Employer (EOE). Armstrong Mold Corporation will make reasonable accommodation(s) for qualified applicants with disabilities and employees* If you are interested in applying for employment and feel you need a reasonable accommodation to apply for a posted position, or are an employee with a question contact Human Resources at 315-437-1517 or by email to hr@armstrongrm.com. • unless an employee reasonable accommodation would result in undue hardship. Job Posted by ApplicantPro

Job DescriptionDescription: Job Summary: A CNC Programmer is responsible for writing and optimizing programs for CNC Machines, interpreting blueprints and ensuring precision in manufacturing process. Essential Functions of Position: · Programming CNC Machines: Write and optimize CNC programs to guide machines in performing tasks such as cutting, milling and drilling according to engineering specifications · Blueprint Interpretation: Read and interpret technical drawings and blueprints to create CNC programs. · Machine Set up and Operation: Set up machine, load raw materials, and adjust machine settings as needed. · Testing and Quality Control: Makes necessary adjustments to ensure efficiency and quality of the final products. Ability · Code Development: Translating programming logic into machine-readable format using a specific programming language. · Software Maintenance: Modification of software after delviery · Collaboration: Work closely with engineers and machinist to evaluate project requirements and resolve any issues related to machine set up or program performance. · Testing and Debugging · Documentation: Maintain records of machine specifications, programming notes and production processes · User Support Required Skills and Qualifications: · A degree in computer science, software engineering, or related field. · Programming Proficiency: Strong knowledge of various programming languages and frameworks · Problem Solving Skills: Ability to analyze problems and develop effective solutions · Experience: Previous experience as a CNC Programmer or in a similar role is typically required. · Attention to detail: Detail-oriented with strong organizational and multitasking abilities. · Technical Skills: Proficiency in Mastercam, software and solid understanding of blueprints and technical drawings are essential · Communication Skills: Excellent verbal and written communication skills to collaborate effectively and efficiently with your team members Physical Requirements: · Ability to stand and/or walk for up to 8 hours per day. · The ability to work on a computer for up to 8 hours a day. · Being mindful of safety and use proper PPE when required. Requirements: This position requires an individual of focus, professional mannerism, mathematical skills, Blueprint comprehension, comprehension of written and verbal instructions. Use CAM software and machine software to write code for part production within a reasonable time frame. • Determine best machine, strategy, tools, and work holding to complete part., • Determine best Feeds and Speeds based on tooling manufacture recommended data or expert experience., • Document Tooling used in the form of a Tool list/Set up sheet with designated Pot/Turret positions. (Tool type, nose radius, RH/LH, Holder projection, Program name/part number, and any other pertinent information for Machine Operators) This should be in the form of paper document for the shop floor and electronic format, stored in the program folder., • Log into MES under Job number before you start the job. Note “Programing/setup” upon completion of job. Work independently to set up Machine Tool and run First Article. • Set up Tooling, load program, and prove effectiveness of your programing. Make immediate changes and update documentation immediately if necessary., • Verify dimensional accuracy and required surface finishes of part produced., • Clean and debur parts as necessary., • Note and document tool life per part. Recommend insert or tooling change out intervals. Maintain documentation, Job Travelers, and Part Identification. • Label Parts with required documentation., • Call for Quality Control as necessary., • Move completed and approved parts to next staging area., • Close your job in MES when completed. Instruct Machine Operator on your developed process and all pertinent information. • Pass on all important information., • Make sure Machine Operator has the Job Traveler and required paperwork., • Note and advise inspection interval. 100% inspection, every other part, every 5 parts, ETC. (This is at your discretion. You are responsible for the parts produced from your developed process! Keep all areas where you work clean and organized. • Put tools away. Remove all trash., • Remove all Scrap materials., • Store any tools or tooling removed from machine during setup. ·Research any special Tooling you may need for a job and request a quote. • If special tooling is needed, research the best option and request a quote from the appropriate vendor. CC your manager for approvals and ordering., • *These responsibilities can and will be updated and then recommunicated as we grow our team.

Job Description Join our Page Trucking Team today! Title: Safety Director Position: Full-time Salary: $110,000-$150,000 (based on experience) The Corporate Safety Director provides technical safety and health direction and oversight to staff and corporate personnel. Develops corporate safety and health programs and objectives and coordinates safety training programs. Monitors safety and health regulations to ensure compliance with Federal and State safety and health regulations. Ultimate goal: Keep staff, drivers and equipment safe. Duties and Responsibilities: • Direct the safety of all staff and drivers, orientation, ongoing driver training and accident prevention activities including:, • Introduction/management of programs and technologies to reduce accidents/incidents, • Reducing the frequency of work-related injuries, • Improving CSA (Compliance, Safety & Accountability) scores, • Reduction in physical damage, liability and cargo claims; frequency and cost, • Direct, oversee and hold accountable all Safety Staff or any personnel involved in overseeing safety sensitive functions to ensure duties are responsibilities are met:, • Ensure all safety policies and procedures are clearly outlined/documented, • Ensure all staff is trained and held accountable to the standards outlined in the policies/work instructions, • Works closely with Risk Manager to:, • Confirm daily, weekly and quarterly responsibilities are being achieved by all staff, • Communicate regarding project statuses and timelines, • Use claim activity to propose modifications/improvements to existing Risk related programs, • Provides technical safety, health support and information to employees and corporate personnel, • Develop annual Company safety goals; identify company safety training needs and develops and coordinates safety training programs., • Initiates, participates or oversees all new/existing product/process reviews, including process hazard analyses, operator training, etc, • Understands Federal and State occupational safety and health regulations and monitors regulatory changes as they occur to ensure Corporate compliance and keep staff/drivers safe., • Promotes safety and health awareness through internal company memoranda, newsletters and specific training programs. Assists as necessary in implementation of a hazard communication program and preparation of reports, • Supports personnel in selection of appropriate personal protective equipment, • Annually reviews and approves corporate safety library (e.g.; videos, regulations and reference manuals), • Responsible for communication with DOT, OSHA and other regulatory agencies where appropriate included Homeland Security/CT-PAT policy, • Audit practices and records to ensure compliance with company programs and federal/state occupational safety and health regulations Company Benefits: • Meritain Aetna (offer two heath plan options), • Company Sponsored HRA card, • Dental Insurance, • Vision Insurance (offer 2 plans), • Colonial Supplemental (accident, medical bridge, disability, cancer, Life/ADD), • Employer Paid Life Insurance policy (1x annual salary), • Pet Insurance / Pet Discount Program, • EAP- Employee Assistance Program, • Monthly Profit Share, once eligible, • 401K with company 401K match, • PTO, • Paid Holidays Qualifications Qualifications: • Bachelor’s degree plus 5 years safety management experience in the transportation industry, • Certification as a Certified Director of Safety preferred, • Knowledge and experience of transporting hazardous materials, • Ability to work in a fast-paced environment, • Experience prioritizing matters and giving clear direction in unexpected situations, • Ability to perform well in stressful situations, • Strong verbal and written communication skills along with the ability to relate well with people from the boardroom to the truck cab and orientation classroom, • Ability to use standard office equipment: computers, phones, photocopiers, fax machines, etc., • Successful candidate will be subject to a pre-employment drug screening and background check Physical Requirements: • Frequently exposed to fumes, airborne particles, moving mechanical parts and vibration, • Noise level in the work environment and on job sites can be loud, • Required to stand, walk, use hands/fingers, handle/feel and reach with hands and arms, • Must be able to read, write, talk and hear Travel: • Travel is primarily local during the business day, although some out of the area and overnight travel may be expected Company Website: • www.pagetrucking.com\nCompany Description Our Culture What makes a company who they are? Is it the people? The Leadership? How they do what they do? Is it something that happens suddenly or something that grows over time? Is it something you aspire to be or something that you actually are? As an owner, it feels like the Company Culture is a quiet pulse. Just as various systems in the body work together to create your pulse, the company culture serves as the pulse of the business, driven by its different internal systems. The people are the heart – they’re the strongest part. The hardest working, don’t stop, can handle the highs and lows of the system. The policies and systems are the immune system. They protect us – sometimes from ourselves, sometimes from the dangers of what we do and sometimes from the weariness that happens over time. Then there is the equipment. The muscles of this analogy – how does a trucking company not flex with the beautiful, capable and highly functional equipment in the fleet? Then there’s leadership- in this analogy what could be considered the brain. Sometimes the decisions we make are a strain to the system and sometimes they are what feeds homeostasis. We’re woven into so much of what has and does happen we’d probably be the nervous system. Think this analogy is corny? You wouldn’t be alone. Dan and Chris J probably will too. And that’s the last part of what drives the pulse in this company – the love and admiration, the spirit. The Company, and its culture, is as human as it gets. Made up of people that have forged bonds with one another, customers and equipment. Made up of people that make mistakes, learn better and then try to do better. A place where sometimes stuff goes awesome and then other times it’s a shit show. But a place where you are in the good company of other good humans. Our culture is like a pulse, sometimes its racing with adrenaline and other times its calmly plugging along. Our Culture\r\n\r\nWhat makes a company who they are? Is it the people? The Leadership? How they do what they do? Is it something that happens suddenly or something that grows over time? Is it something you aspire to be or something that you actually are?\r\n\r\nAs an owner, it feels like the Company Culture is a quiet pulse. Just as various systems in the body work together to create your pulse, the company culture serves as the pulse of the business, driven by its different internal systems. The people are the heart – they’re the strongest part. The hardest working, don’t stop, can handle the highs and lows of the system. The policies and systems are the immune system. They protect us – sometimes from ourselves, sometimes from the dangers of what we do and sometimes from the weariness that happens over time. Then there is the equipment. The muscles of this analogy – how does a trucking company not flex with the beautiful, capable and highly functional equipment in the fleet? Then there’s leadership- in this analogy what could be considered the brain. Sometimes the decisions we make are a strain to the system and sometimes they are what feeds homeostasis. We’re woven into so much of what has and does happen we’d probably be the nervous system.\r\n\r\nThink this analogy is corny? You wouldn’t be alone. Dan and Chris J probably will too. And that’s the last part of what drives the pulse in this company – the love and admiration, the spirit. The Company, and its culture, is as human as it gets. Made up of people that have forged bonds with one another, customers and equipment. Made up of people that make mistakes, learn better and then try to do better. A place where sometimes stuff goes awesome and then other times it’s a shit show. But a place where you are in the good company of other good humans. Our culture is like a pulse, sometimes its racing with adrenaline and other times its calmly plugging along.

Job DescriptionCNC Turning Center Operator Join Eaton’s ES GEIS CHD division on our third shift and keep production humming through the night. Your core hours are 10:30 pm–6:30 am, with an hourly base of $22.52 plus a $1.50/hour shift premium. A night on the floor When the lights are bright and the plant is quiet, you’re the pro ensuring the work never stops. You’ll rotate between two or more CNC lathes, chuckers, and turning centers—some equipped with robotic, automatic, or manual load/unload systems—keeping cycle times tight and quality consistent. You’ll also run Six Spindle Automatic Bar Machines to meet schedule demands. Before a run, you review operation sheets, tapes, and blueprints, verify tooling, and load the automatic tool changer. During production, you gauge parts using adjustable and fixed gauges, document results, and hold parts to spec. If something drifts, you help isolate and correct malfunctions in machining and control units to bring everything back into control. Between jobs, you’ll follow standard work, maintain visual controls (charts, schedules, and more), and record accurate data. You’ll keep machines and work areas clean and orderly, performing minor maintenance like cleaning, inspections, light lubrication, and tightening loose fasteners so the next cycle starts flawlessly. What you bring • At least 1 year of hands-on CNC operation experience, or completion of a CNC certificate program, • High school diploma or GED, • Located within 50 miles of Syracuse, NY (no relocation offered), • Immigration status: Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc.Why Eaton We offer competitive Health and Welfare benefits, Retirement programs, and options for paid and unpaid time away—because supporting you and your family matters. Click here for more detail: Eaton Benefits Overview. Specific programs may depend on location, hire date, and collective bargaining agreements. Equal Opportunity We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Fair Chance Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. Background Check You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. Accommodation To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at 1-800-836-6345 to discuss your specific need. Only accommodation requests will be accepted by this phone number.

Job Description We are looking for a CNC Machine Operator to join our manufacturing team at Bluefors in Syracuse, NY. In this role, you will support the production of precision components used in advanced cryogenic systems that power breakthroughs in quantum technology, scientific research, and other cutting-edge industries. This is an excellent opportunity for someone who enjoys hands-on machining work, takes pride in quality craftsmanship, and wants to grow within a collaborative, high-tech manufacturing environment. Interested? Keep reading! Your tasks as a CNC Operator will include operating CNC machines and machining centers to fabricate metallic and nonmetallic parts that meet quality and production standards. You will load raw materials into machines, inspect finished parts according to established procedures, and perform quality inspections of first-piece parts as verified by a supervisor or quality technician. You will troubleshoot machine operations, monitor machining performance, and adjust as necessary to ensure parts remain within specifications. In addition, you will use measuring tools daily, clean and deburr finished parts, monitor inventory levels for tooling and materials, and maintain a clean and organized workspace. You will also support machine maintenance activities and complete ongoing training requirements to support technical growth and continuous improvement. We are looking for a CNC Operator with a high school diploma or GED and at least one year of manufacturing experience, or a one-year technical certificate with related experience, or an equivalent combination of education and experience. You should have the ability to set up and use measuring tools and read and interpret blueprints, with GD&T knowledge considered a plus. The ideal candidate will have strong attention to detail, the ability to follow procedures accurately, and a commitment to producing high-quality work. Familiarity with g-code programming and CNC machining processes is important, and CNC programming experience is a plus. You should be dependable, safety-conscious, and able to work effectively both independently and as part of a team. We also appreciate candidates who demonstrate strong mechanical aptitude and a proactive approach to troubleshooting and problem-solving. Experience working in a manufacturing environment focused on quality and precision machining will help you stand out. A willingness to continue learning and developing technical skills, along with a team-oriented mindset and strong organizational skills, is highly valued. Candidates who align with our values of quality, collaboration, continuous learning, and safety will thrive in this role. We offer you an interesting, challenging, and responsible position, along with the support of a highly skilled and growing organization. This is an excellent opportunity for your professional growth in a dynamic, enthusiastic, and collaborative team where we work together and support each other. We foster a multicultural work environment with room to grow, where you can use your potential and further develop your skills. We offer a generous benefits package including health, dental, vision, 401(k), long- and short-term disability, life insurance, training, tuition reimbursement, and Paid Time Off (PTO). Location: Syracuse, NY Pay range: $19.25 - $23.07/hour (DOE) Main Responsibilities include the following: -Operate CNC machines and machining centers to fabricate required parts -Use qualified measuring tools on a daily basis -Feed and load raw materials into CNC machines -Inspect parts according to established policies and procedures -Troubleshoot machines and maintain machine operations -Monitor machine operation and adjust controls as required -Detect machine malfunctions and worn or damaged tooling -Perform inspection operations to maintain quality standards and specifications -Clean machines, tooling, and finished parts as required -Stack and organize raw and finished materials properly within storage areas -Perform first-piece quality inspections as verified by a supervisor or quality technician -Monitor and record tooling, supplies, and raw material inventory usage -Complete ongoing technical training requirements -Maintain good housekeeping and a clean work environment -Perform additional duties as assigned What We Expect from You -High school diploma or general education degree (GED), or equivalent combination of education and experience -One year of manufacturing experience preferred -Technical certificate with related machining experience preferred -Ability to set up and use measuring tools -Ability to read and understand blueprints and technical drawings -Familiarity with GD&T principles preferred -Ability to read and understand g-code programming -Strong attention to detail and commitment to quality -Strong mechanical aptitude and troubleshooting skills -Dependability and ability to work independently and in a team environment -Commitment to safety and following established procedures -Willingness to continue learning and developing technical skills -Ability to align with company Leadership Principles and workplace competencies -Excellent command of English, both written and spoken We Also Appreciate -CNC programming experience -Experience working in a precision manufacturing environment -Familiarity with quality inspection processes and standards -Strong organizational and time management skills -A proactive approach to troubleshooting and process improvement -Ability to adapt in a fast-paced production environment -A collaborative, team-oriented mindset -A positive attitude and strong alignment with company values, including safety, diversity, and organizational effectiveness Physical Demands While performing the duties of this job, the employee may be required to stand for extended periods, use hands and fingers for detailed machining tasks, and frequently lift or move materials and tooling. The role may involve bending, reaching, stooping, and handling finished parts and raw materials. Specific vision abilities required include close vision, depth perception, and the ability to adjust focus. Work Environment This role operates in a manufacturing environment and regularly works around moving mechanical parts and machining equipment. The employee may occasionally be exposed to noise, airborne particles, heat, vibration, and other manufacturing-related conditions. Required personal protective equipment (PPE) must be worn as applicable. Employees are expected to maintain a safe, clean, and organized workspace at all times. This role does not offer sponsorship for work authorization. Bluefors Cryocooler Technologies, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration regardless of disability status, veteran status, or any other New York State or federally protected characteristic.

Job Description We are LOTTE BIOLOGICS! Delivering Therapies That Enable a Healthier World. A new company, built on 80 years of tradition. We embody our core values of being Inspired by Science, Embracing Diversity, Fostering Talent, and Connecting Lives. Our mission is to be the most trusted partner in the industry, with high standards of quality and continuous innovation, to reliably deliver benefits for patients worldwide. Position Summary The Senior Process Engineer is a key technical leader responsible for supporting the successful transfer, fit assessment, and lifecycle optimization of monoclonal antibody (mAb) and antibody-drug conjugate (ADC) processes within a CDMO manufacturing environment. This role partners closely with MS&T, Plant/Facilities Engineering, and Capital Project Engineering to ensure manufacturing readiness, effective facility fit, and robust process performance. The position requires deep expertise in bioprocessing operations and a strong understanding of equipment design, facility capabilities, and capital project execution to enable seamless delivery of client programs from tech transfer through commercial manufacturing. This role directly enables: • Successful onboarding of new client programs, • Efficient capital deployment and facility utilization, • Robust, scalable, and compliant manufacturing processes Duties & Responsibilities • Serve as the senior process engineering technical owner for assigned client programs, manufacturing platforms, unit operations, and process-related equipment, maintaining accountability from proposal and facility-fit assessment through technology transfer, PPQ, commercial manufacturing, and lifecycle improvement., • Exercise expert-level, independent engineering judgment to make timely, risk-based decisions involving process design, scale-up, equipment capability, utility demand, containment, control strategy, manufacturability, and GMP compliance; clearly document assumptions, rationale, risks, and required escalation., • Lead complex, cross-functional technical problem solving across MS&T, Manufacturing, Quality, Facilities and Plant Engineering, Automation, Capital Projects, EHS, Supply Chain, Validation, and client teams; establish problem statements, align decision criteria, direct root-cause analysis, and drive durable solutions to closure., • Lead facility-fit and manufacturing-readiness assessments for mAb and ADC processes, evaluating process requirements against equipment, single-use assemblies, automation, clean utilities, HVAC, material and personnel flows, capacity, and high-potency containment constraints., • Translate client process knowledge and product requirements into robust engineering bases of design, process descriptions, flow diagrams, mass and energy balances, equipment sizing, utility loads, URS, control requirements, acceptance criteria, and operational-readiness plans., • Own technical gap assessments and solution strategies, integrating product quality, patient safety, operator safety, schedule, cost, capacity, reliability, and business continuity to recommend equipment modifications, procedural controls, or capital investments., • Act as the authoritative process engineering interface with clients and internal governance teams; present technical positions, challenge unsupported assumptions, resolve conflicting requirements, and communicate decision impacts, residual risks, and commitments to senior stakeholders., • Provide technical leadership for technology transfer, scale-up, engineering runs, PPQ, process validation, and routine commercial operations, ensuring equipment and facility readiness, appropriate process controls, and effective transfer of process knowledge., • Lead or approve structured risk assessments for process, equipment, containment, automation, and facility interfaces; ensure critical risks have clear owners, mitigation plans, acceptance criteria, and traceable closure., • Direct resolution of significant deviations, recurring process failures, equipment-performance issues, and manufacturing bottlenecks by applying first-principles engineering, process data, statistical analysis, and systematic root-cause methods; define and verify effective CAPAs., • Provide process engineering leadership through conceptual and detailed design, design reviews, P&ID and layout review, equipment and vendor selection, FAT/SAT, commissioning, qualification, startup, and handover for new installations, expansions, and facility upgrades., • Define and defend process requirements and engineering acceptance criteria for upstream, downstream, ADC, single-use, stainless-steel, hybrid, chromatography, filtration, mixing, and high-potency containment systems, as applicable., • Author, review, and approve high-quality technical deliverables, including engineering assessments, process descriptions, URS, specifications, technical reports, risk assessments, change controls, deviation investigations, validation documents, and decision records, in accordance with cGMP and the site quality system., • Establish and monitor process and equipment performance indicators; identify adverse trends, reliability risks, capacity constraints, and opportunities to improve yield, throughput, cycle time, right-first-time performance, and cost of goods without compromising quality or compliance., • Maintain lifecycle technical ownership by assessing proposed changes, new product introductions, obsolescence, supplier changes, and evolving regulatory or business requirements for impact to the validated state and manufacturing control strategy., • Provide visible on-the-floor technical leadership during critical manufacturing activities and escalations, ensuring safe, compliant execution and disciplined recovery while balancing immediate production needs with long-term process robustness., • Mentor engineers and technical staff, develop engineering standards and reusable problem-solving practices, conduct technical peer reviews, and strengthen organizational capability through coaching, knowledge sharing, and lessons learned across client programs. Education & Experience • Bachelor's degree in Chemical Engineering, Biochemical Engineering, Bioengineering, or a closely related engineering discipline is required; an advanced degree is preferred., • A minimum of 8 years of progressively responsible experience in biopharmaceutical process engineering, manufacturing sciences and technology, process development, manufacturing, or a related technical function; experience in a CDMO or other multi-product, client-facing environment is strongly preferred., • Demonstrated experience providing technical ownership for complex biologics manufacturing processes or unit operations from technology transfer and facility fit through validation and commercial lifecycle support., • Direct experience with mAb manufacturing is required; experience with ADC manufacturing, bioconjugation, high-potency compounds, or containment systems is strongly preferred., • Proven record of leading multidisciplinary technical initiatives, investigations, design decisions, or manufacturing-readiness activities with significant quality, safety, cost, capacity, or schedule impact., • Professional Engineer licensure, Lean Six Sigma certification, project management certification, or relevant pharmaceutical engineering and bioprocess training is beneficial but not required. Knowledge, Skills, Abilities • Expert knowledge of biopharmaceutical process engineering, including upstream and downstream mAb operations, scale-up, mass and energy balances, equipment sizing, controls, clean utilities, and facility fit., • Technical depth in relevant areas such as cell culture, harvest and clarification, chromatography, filtration and TFF, formulation, buffer and media preparation, mixing, single-use or stainless-steel systems, and ADC processing., • Strong command of cGMP, engineering practices, validation lifecycle principles, change control, deviations and CAPA, data integrity, quality risk management, and technically sound GMP documentation., • Proven ability to apply first-principles, risk-based judgment and structured problem-solving methods—including root-cause analysis, FMEA, statistical and trend analysis—to resolve complex technical issues and verify effective corrective actions., • Experience leading cross-functional facility-fit, technology-transfer, scale-up, engineering-run, PPQ, validation, commercial-support, and lifecycle-improvement activities in a fast-paced, multi-client CDMO environment., • Ability to translate process and client requirements into engineering deliverables and support capital projects from design and vendor selection through FAT/SAT, commissioning, qualification, startup, operational readiness, and turnover., • Strong client-facing communication, stakeholder influence, automation and data-systems awareness, audit and inspection support, and leadership skills, including mentoring, peer review, knowledge sharing, and development of repeatable engineering standards. Physical Demands • The physical demands of this position may include independently lifting and carrying items weighing up to 50 pounds; sitting, standing, walking on level surfaces, crouching, squatting, kneeling, and crawling; climbing stairs and ladders; and performing visual inspections of equipment and installations. The role also requires the use of applicable personal protective equipment (PPE), including a hard hat, hearing protection, safety glasses, steel-toed footwear, fall-protection equipment, and electrical-safety gear. Work Environment • The work environment may include office, laboratory, indoor, and outdoor settings. The position may require working independently or in proximity to others and may involve exposure to elevated noise levels, work at heights, and access to confined or restricted spaces. Travel This role may require up to 10% travel. Target Bonus 16% Work Location: East Syracuse, NY New York Pay Range $110,000—$154,000 USD We are an Equal Employment Opportunity ("EEO") Employer. We believe that women, people of color, veterans and LGBTQ communities must participate in the work we do, so we strongly encourage applications from people with these identities or who are members of underrepresented communities! If this is the work that you want to do, in a culture of inclusion and excellence with the goal of making our world to be a healthier place, then please apply today!

Job DescriptionDescription: Altitude Access Solutions Inc., the new operator of the Syracuse Hancock International Airport parking operation is growing and seeking dedicated, hardworking individuals to join our team. As our operations expand, we have multiple new positions available. We are looking for part-time Maintenance Workers who take pride in their work, value excellent customer service, and enjoy contributing to a positive, reliable, and safety-focused environment. The Maintenance Worker is responsible for maintaining the deadlines, safety, and operational standards of the parking facilities at Syracuse Hancock International Airport including facility upkeep, minor repairs, parking equipment maintenance and troubleshooting, and providing excellent customer service. Essential Functions/Duties/Responsibilities: • Perform routine maintenance and cleaning tasks as outlined in checklists or directed by the Facility Manager/Supervisor, ensuring all areas of the facility are free of dirt, dust, litter, and debris using appropriate tools and equipment, • Conduct daily walkthroughs of the garage to identify and address maintenance issues promptly, • Maintain cleanliness of entrances, exits, stairwells, surface rails, booths, offices, and restrooms; empty trash receptacles throughout the facility, • Paint designated areas (e.g., poles, signs, doors, walls, curbs, islands, gates) to maintain a neat and professional appearance, • Replace burned-out light bulbs and apply oil absorbent to spills, as needed, • Submit repair and maintenance requests, • Monitor safety items such as gate arms and clearance bars for proper function, • Proactively identify maintenance issues and take corrective action without waiting for direction, when appropriate, • Manage workload effectively to ensure daily and seasonal maintenance tasks are completed on schedule with minimal supervision, • Maintenance staff may be cross-trained to assist with shuttle operations as needed., • Inspect ticket spitters and gates daily for operational accuracy, ticket supply, and general appearance., • Maintain inventory of janitorial supplies and update garage/lot sweep sheets regularly., • Operate equipment such as automatic sweepers, scrubbers, weed eaters, lawnmowers, and other tools for facility upkeep and minor repairs., • Perform seasonal tasks including snow removal using shovels, blowers, and other light-duty equipment., • May be required to complete light repairs including concrete/asphalt patching, plumbing fixes (faucets, drains, leaks), door and lock maintenance, and minor carpentry or signage installation., • Support preventative maintenance programs and respond promptly to service requests., • Safely and effectively use hand tools and small power tools for general maintenance tasks., • Report accidents, safety hazards, suspected policy violations, or unusual occurrences to the Facility Manager/Asst. Manager or Supervisor in a timely manner., • Deliver excellent customer service by assisting customers within the facility, addressing inquiries, and resolving complaints independently or with Supervisor support., • Remain familiar with all aspects of facility operations and provide coverage for other duties as needed., • Maintain an organized and tidy work area, to adhere to company safety protocols., • Perform additional tasks as assigned to support overall facility operations. Due to weather events and operational emergencies, employees may be required to work extended hours or mandatory overtime to maintain safe operations. Requirements: • Good verbal and written communication skills., • Strong active listening skills; asks for clarification when needed., • Ability to read and interpret written information., • Strong interpersonal and customer service skills., • Positive attitude and a team-player mindset., • Develop and maintain thorough knowledge of the garage layout and surrounding area, including major streets, landmarks, and freeways., • Ability to function well in a fast-paced environment. Reacts well under pressure., • Knowledge of OSHA safety practices and ability to follow established safety procedures, • Working knowledge of basic electrical, mechanical, and plumbing repair, • Experience maintaining parking facilities, equipment, or access/revenue control systems (preferred), • Ability to operate maintenance equipment (lifts, snow equipment, hand/power tools) Physical Requirements: • Ability to stand and walk for extended periods (up to 8 hours per shift)., • Frequent ability to climb, balance, stoop, kneel, crouch, twist, stretch, and bend as part of daily tasks., • Capability to lift and move objects weighing up to 75 lbs., • Occasionally required to reach with hands and arms above shoulder level, up to 75 lbs., • Comfortable working in environments with dust, chemicals, and other potential irritants., • Ability to work outdoors and in varying weather conditions, including rain, snow, heat, and cold. Education and Experience Required: • High school diploma or equivalent., • At least two to five years of related experience in general facility or commercial/industrial maintenance Special Requirements: • Valid NYS driver’s license for the class of vehicle being driven and acceptable DMV record, • Subject to drug-testing per company policy, • Ability to work second and/or third shift, as well as weekends and holidays, • Ability to report for duty during severe weather events and emergencies, including working mandatory overtime, • Maintain a clean Motor Vehicle Record (MVR) in accordance with company and Airport standards, • Possess a valid DOT Medical Examiner’s Certificate or ability to obtain and maintain one as a condition of employment, • Must successfully complete E- Verify I9 process. We will provide E-Verify and the federal government with your I-9 information to confirm that you are authorized to work in the U.S. *Any offer of employment would be contingent on passing a security clearance background check and pre-employment drug test. Preferred Qualifications • Previous experience working at an airport. Employee Benefits (eligibility dependent on employment type): • Paid time off, • Paid holidays, • Medical/Dental/Vision, • NYS Deferred Compensation Plan 457(b) with employer 401(a) match, • Paid Family Leave, • Employee Assistance Program, • Flexible Spending Accounts, • Supplemental Insurance, • Night Shift Differential. $1.00/night shift differential for the overnight shift EEO Statement: Altitude Access Solutions, Inc. is committed to equal employment opportunity and leveraging the talent of a diverse workforce to serve the traveling public at Syracuse Hancock International Airport. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran, or any other basis protected by Federal, State or Local law. We encourage individuals from all backgrounds to apply.

Job Description U.S. Water Services Corporation is a well-established and diverse water and wastewater utility organization specializing in utility maintenance, operations, engineering and construction services. Headquartered in New Port Richey, Florida, U.S. Water is rapidly expanding with a staff of over 700 employees in 19 states. U.S. Water's Industrial Group specializes in providing wastewater facility operations & maintenance services for clients in the industrial and private sector. Job SummaryWe currently have an opportunity for an experienced Craftsman Technician. U.S. Water's Industrial Group operates treatment plants for its customers throughout the US. Each customer site is operated by an offsite project manager who works with a dedicated onsite Lead Operator and site operations team. This team is responsible for monitoring processes, adjusting controls, performing laboratory tests, maintaining equipment, replenishing chemicals, and maintaining good housekeeping. As part of the maintenance team, the Craftsman Technician completes a variety of maintenance tasks across our facilities. Primary Responsibilities • Performs scheduled routine preventative maintenance on plant equipment – pumps, blowers, motors. This includes tearing down and rebuilding equipment., • Performs non-routine system upgrades and process improvements. This includes removal of old equipment, installation of new equipment and machinery., • Experience with PVC, HDPE pipework preferred., • Demonstrates good interpersonal skills., • Applies a working knowledge of fundamental principles, terminology, and methodology in carrying out assignments., • Understands and applies standard policies and procedures within specific discipline., • Performs assignments with clear, specific objective which may require the limited exercise of judgment and decision-making skills., • Digs, spreads, and level dirt and gravel using picks, shovel and/or grading equipment., • Lifts and carries building materials, tool & supplies., • Cleans tools, equipment, materials, and work areas, • Performs a variety of tasks involving dexterous use of hands and tools, such as sawing lumber, dismantling forms, removing projections from concrete, mounting pipe hangers and cutting and attaching insulation material., • May operate a variety of the following types of equipment: jackhammer, generator, sand blaster, concrete mixer, grinders, compressors, saws, tampers, pumps etc. NOTE: This Job Description is not inclusive of all job duties. Job Requirements • High school diploma and 5+ years of relevant experience, • Valid driver's license, • Ability to travel 2-3 weeks at a time, • Experience working in an industrial setting, • Applicable Health & Safety training, • Ability to read plans / drawings / specifications and interpret data, • Knowledge of Microsoft Office, • Examples of Physical Requirements:, • Lifting: must be able to lift and carry up to 50lbs, • Standing: Position requires standing for extended periods, with occasional sitting", • Reaching/Climbing: Must be able to reach overhead and climb stairs and ladders, • Environmental Conditions: Must be able to work outdoors in various weather conditionsCompensation and Benefits Pay is commensurate with experience and reflective of market. U.S. Water offers a comprehensive benefits package including medical, dental, vision, life insurance, short/long-term disability, paid time off, holiday pay and 401(k) with company match. U.S. Water offers competitive wages and benefits and is committed to hiring and retaining a diverse workforce. We are an Equal Opportunity Employer, making decisions without regard to race, color, religion, sex, national origin, age, veteran status, disability, or any other protected class. Job Posted by ApplicantPro

Job DescriptionDescription: Altitude Access Solutions Inc., the new operator of the Syracuse Hancock International Airport parking operation is growing and seeking dedicated, hardworking individuals to join our team. As our operations expand, we have multiple new positions available. We are looking for full-time Maintenance Workers who take pride in their work, value excellent customer service, and enjoy contributing to a positive, reliable, and safety-focused environment. The Maintenance Worker is responsible for maintaining the deadlines, safety, and operational standards of the parking facilities at Syracuse Hancock International Airport including facility upkeep, minor repairs, parking equipment maintenance and troubleshooting, and providing excellent customer service. Essential Functions/Duties/Responsibilities: • Perform routine maintenance and cleaning tasks as outlined in checklists or directed by the Facility Manager/Supervisor, ensuring all areas of the facility are free of dirt, dust, litter, and debris using appropriate tools and equipment, • Conduct daily walkthroughs of the garage to identify and address maintenance issues promptly, • Maintain cleanliness of entrances, exits, stairwells, surface rails, booths, offices, and restrooms; empty trash receptacles throughout the facility, • Paint designated areas (e.g., poles, signs, doors, walls, curbs, islands, gates) to maintain a neat and professional appearance, • Replace burned-out light bulbs and apply oil absorbent to spills, as needed, • Submit repair and maintenance requests, • Monitor safety items such as gate arms and clearance bars for proper function, • Proactively identify maintenance issues and take corrective action without waiting for direction, when appropriate, • Manage workload effectively to ensure daily and seasonal maintenance tasks are completed on schedule with minimal supervision, • Maintenance staff may be cross-trained to assist with shuttle operations as needed., • Inspect ticket spitters and gates daily for operational accuracy, ticket supply, and general appearance., • Maintain inventory of janitorial supplies and update garage/lot sweep sheets regularly., • Operate equipment such as automatic sweepers, scrubbers, weed eaters, lawnmowers, and other tools for facility upkeep and minor repairs., • Perform seasonal tasks including snow removal using shovels, blowers, and other light-duty equipment., • May be required to complete light repairs including concrete/asphalt patching, plumbing fixes (faucets, drains, leaks), door and lock maintenance, and minor carpentry or signage installation., • Support preventative maintenance programs and respond promptly to service requests., • Safely and effectively use hand tools and small power tools for general maintenance tasks., • Report accidents, safety hazards, suspected policy violations, or unusual occurrences to the Facility Manager/Asst. Manager or Supervisor in a timely manner., • Deliver excellent customer service by assisting customers within the facility, addressing inquiries, and resolving complaints independently or with Supervisor support., • Remain familiar with all aspects of facility operations and provide coverage for other duties as needed., • Maintain an organized and tidy work area, to adhere to company safety protocols., • Perform additional tasks as assigned to support overall facility operations. Due to weather events and operational emergencies, employees may be required to work extended hours or mandatory overtime to maintain safe operations. Requirements: • Good verbal and written communication skills., • Strong active listening skills; asks for clarification when needed., • Ability to read and interpret written information., • Strong interpersonal and customer service skills., • Positive attitude and a team-player mindset., • Develop and maintain thorough knowledge of the garage layout and surrounding area, including major streets, landmarks, and freeways., • Ability to function well in a fast-paced environment. Reacts well under pressure., • Knowledge of OSHA safety practices and ability to follow established safety procedures, • Working knowledge of basic electrical, mechanical, and plumbing repair, • Experience maintaining parking facilities, equipment, or access/revenue control systems (preferred), • Ability to operate maintenance equipment (lifts, snow equipment, hand/power tools) Physical Requirements: • Ability to stand and walk for extended periods (up to 8 hours per shift)., • Frequent ability to climb, balance, stoop, kneel, crouch, twist, stretch, and bend as part of daily tasks., • Capability to lift and move objects weighing up to 75 lbs., • Occasionally required to reach with hands and arms above shoulder level, up to 75 lbs., • Comfortable working in environments with dust, chemicals, and other potential irritants., • Ability to work outdoors and in varying weather conditions, including rain, snow, heat, and cold. Education and Experience Required: • High school diploma or equivalent., • At least two to five years of related experience in general facility or commercial/industrial maintenance Special Requirements: • Valid NYS driver’s license for the class of vehicle being driven and acceptable DMV record, • Subject to drug-testing per company policy, • Ability to work second and/or third shift, as well as weekends and holidays, • Ability to report for duty during severe weather events and emergencies, including working mandatory overtime, • Maintain a clean Motor Vehicle Record (MVR) in accordance with company and Airport standards, • Possess a valid DOT Medical Examiner’s Certificate or ability to obtain and maintain one as a condition of employment, • Must successfully complete E- Verify I9 process. We will provide E-Verify and the federal government with your I-9 information to confirm that you are authorized to work in the U.S. *Any offer of employment would be contingent on passing a security clearance background check and pre-employment drug test. Preferred Qualifications • Previous experience working at an airport. Benefit Package Includes: • Paid time off, • Medical/Dental/Vision, • NYS Deferred Compensation Plan 457(b) with employer 401(a) match, • Paid Family Leave, • Employee Assistance Program, • Flexible Spending Accounts, • Supplemental Insurance, • Night Shift Differential. $1.00/night shift differential for the overnight shift EEO Statement: Altitude Access Solutions, Inc. is committed to equal employment opportunity and leveraging the talent of a diverse workforce to serve the traveling public at Syracuse Hancock International Airport. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran, or any other basis protected by Federal, State or Local law. We encourage individuals from all backgrounds to apply.

Job Description Job description: Buffalo Biodiesel Inc. is in growth mode and currently seeking a few full-time Yard and Facilities Worker to join our team! This is a great opportunity to join a fast-growing business! We are seeking a yard jockey to work at our Syracuse, NY Depot. Qualifications/Requirements: • High school diploma or GED Required, • Associate's degree preferred, • CDL preferred, • Driver's License with clean driving record, • Hard working, • Drug free, • Able to lift 75lbs Responsibilities: • Operate forklift, • Load and offload trucks, trailers, and tankers, • Refuel and clean vehicles, • Basic maintenance - yard work and cleaning, • Basic inventory and coordination with corporate, • Once a week travel with BOX truck operator to help with VAT removals and swaps Shift and Pay: • $25/hour with weekly overtime, • M-F 6:30AM - 3:30PM, • One day a week 8:30AM - 10:00 PM Benefits: • Medical, Dental, and Vision Insurance., • 401k (with match), • Paid Time Off, • Growth Opportunities Who We Are: Buffalo Biodiesel Inc. has been in business since 2005. We are a growing company that collects and recycles used cooking oil. With over 20 years in business, we collect, and process used cooking oil to produce Biodiesel, a carbon reducing alternative fuel to Hydrocarbons. We operate in 15 States with service to over 27,000 locations and growing. Buffalo Biodiesel Inc. is subject to and complies with the Federal Drug-Free Workplace Act. Job Type: Full-time Benefits: • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance Education: • High school or equivalent (Required) Experience: • Forklift: 1 year (Required) Work Location: In person

Job DescriptionJob Description The work involves a variety of routine manual tasks requiring little planning or special knowledge and sustained medium to heavy physical effort involving frequent exposure to all kinds of weather conditions. A Laborer I usually works as a member of a crew using hand tools and power tools such as chain saws, pneumatic tools, and may operate power driven equipment such as lawn mowers, snow blowers and small tractors. Laborers I may assist with: the repair of basic plumbing (PVC and copper), greasing of pumps and performance of basic preventative maintenance on wastewater treatment equipment. This work is distinguished from other classes performing routine manual tasks as a member of a crew by either the work setting or the degree of specialization. Examples would be groundkeepers, maintenance helpers or stock attendants. A Laborer has no supervisory responsibilities. Positions in this class are supervised by a higher level laborer or maintenance position, usually a foreman, crew-leader, or other higher level worker, who assigns tasks giving detailed instructions. The work of the Laborer is subject to close supervision in progress and upon completion, although routine repetitive duties once learned may be performed more independently. Does related work as required. Typical Work Activities • Laborers perform a wide variety of routine manual activities under supervision including, but not limited to the following:, • Removes trash, animal carcasses, and rock fall from roadways and rights of way; cleans drainage ditches of ice and other obstructions; does manual work in resurfacing roadways including breaking up surfaces with hand or power tools and mixing and spreading a variety of paving material; controls traffic on highway maintenance and construction projects; shovels sand and salt on icy pavements and cleans snow and ice from roadways; operates snow plow wings; installs, repairs and paints guardrails; sets up and takes down snow fencing; cuts grass, brush and trees using hand tools and powered equipment., • Works on the installation, maintenance, and repair of traffic signal systems and overhead street lighting by digging holes, attaching cables, cleaning and painting poles and signal heads, pouring concrete, cleaning and polishing lenses and reflectors, replacing broken glass and burned-out bulbs, and digging trenches, inserting electric cables, and refilling the trench., • Performs manual work in the repair and maintenance of bridge structures including the removal of deteriorated concrete, wood and steel with hand or power tools, mixing concrete and painting; uses sand blast and Gunite equipment., • May assist equipment repair mechanics in such activities as the mounting and dismounting of major assemblies such as snowplows and salt spreaders and in the installation or removal of heavy items such as engines, transmissions and differentials., • Performs a variety of woods, field and stream related work including cutting trees and brush, clearing trails, building and maintaining of park roads, dams, marsh ponds, dikes, and flood structures by clearing brush and trees, digging trenches, filling holes, and performing like manual tasks; does rough carpentry and painting; maintains grounds including mowing grass, cleaning catch basins, shoveling snow, removing refuse, and excavating for repair of water, stream, and drainage lines., • Loads and unloads trucks of such items as crates, machinery, furniture, equipment, heavy stores, etc. by physically lifting the items or by operating a hand truck, forklift or similar equipment; moves items to and from storerooms; may accompany a truck driver or motor vehicle operator in the pick-up and delivery of items and as such may in the event of need be required to drive the vehicle., • May assist on survey parties and in construction work by holding a leveling rod and chain., • May assist skilled laborers in the installation, maintenance, and repair of wastewater treatment plant mechanical equipment, process piping, and related appurtenances by using a variety of tools and equipment in the performance of unskilled tasks., • In addition to the use of simple hand tools, chain saws, power mowers and like equipment, a Laborer may operate such equipment as portable electric generators, compressors, salt and sand spreaders, bituminous heaters, pumps and other non-self-propelled machines. They may occasionally operate self-propelled equipment such as trucks, riding mowers and other light equipment occasionally and for short periods of time.Knowledge, Skills, and Abilities, • Ability to understand and follow verbal and written instructions., • Ability to perform heavy manual labor., • Ability to use a variety of hand and power tools and motorized equipment.Minimum Qualifications None. Special Necessary Requirement When required to operate motor vehicles, candidates must possess a valid New York State driver's license appropriate for the type of vehicle to be operated. Benefits • Dental insurance, • Health insurance, • Paid time off, • Parental leave, • Vision insurance, • Retirement plan The Affirmative Action Policy of the City of Syracuse is to provide equal employment opportunity for all individuals regardless of race, color, sex, religion, creed, age (18 and over), marital status, national origin, disability, veteran status, gender identity or gender expression, sexual or affectional preference or orientation, or any other classified group within the protected class. The City also complies with 31 CFR part 51. If you have a disability for which you wish special accommodation to be made, contact the Office of Human Resources at 315-448-8780 or personnel@syr.gov. All offers of employment will be contingent on the successful completion of a background check and/or drug screen. Job Posted by ApplicantPro

Description: Objectives of this Role • Provide professional equipment installation, maintenance, troubleshooting and customer support services for a complete range of Schneider products., • Demonstrate excellent technical, customer service and communication skills on the job., • Train customer employees on fundamental operation and maintenance procedures for Schneider equipment., • Meet Schneider’s quality standards while maintaining working knowledge of relevant technologies and best practices. Duties and Responsibilities • Perform installation, start up and debug of Schneider equipment at customer locations., • Provide service maintenance, troubleshooting, and training following established company procedures., • Greater than 75% travel required., • Serve as the liaison between the customer and company. Ensure the customer receives the final, up-to-date machine documentation (manuals, electrical drawings, etc.)., • Manage the assigned project ensuring schedules and objectives are met. Ensure customer satisfaction by obtaining written site acceptance on work performed., • Demonstrate profound knowledge of the theory of operation, maintenance and troubleshooting of all equipment, operator interfaces, applied technologies and sub-components applied in the manufacture of Schneider equipment., • Utilize Dynamics 365 Field Service Module to complete daily time entries. Provide trip report entries detailing service trip progression and results., • Manage trip expenses utilizing SAP Concur platform., • Provide in-house technical and phone support when requested., • Use a wide variety of resources (hand tools, computers, and software) to perform routine and non-routine maintenance, troubleshooting and reports., • Support back office ensuring all daily/weekly documentation is completed, accurate and submitted in a timely manner., • Perform other duties as assigned by management. Requirements: Skills and Qualifications • Associates degree in applied technology or completed mechanical/electrical apprenticeship or equivalent experience., • Short-term training in programmable controllers is desired., • 3+ years of experience in a field service capacity or as a plant maintenance technician., • Strong electrical, mechanical, and programming background. This includes robotics and PLC ladder logic. FANUC robotics experience preferred., • Demonstrated proficiency in MS Office applications., • Excellent communication and organizational skills, with attention to detail., • Strong sense of personal accountability regarding meeting deadlines. Physical/Mental Standards • Ability to operate computer, telephone, hand tools and shop equipment., • Ability to work independently., • Electrical/mechanical/programming skills., • Manual dexterity sufficient for constant use of a keyboard, mouse, hand tools and telephone., • Speech and hearing sufficient for regular communications., • Vision sufficient for use of a computer monitor and transaction documents., • Ability to perform climbing, stooping, crouching, walking, grasping, talking, hearing and repetitive motions., • Executing up to 50 pounds of force occasionally, and/or up to 20 pounds of force frequently, and or 10 pounds of force constantly to lift, carry, push, pull or otherwise move objects., • Close mental and visual requirements needed to perform work dealing primarily with machine building, electrical, mechanical, robotic, blueprint reading – mechanical and wiring, and customer service., • Ability to plan, schedule, train, check and evaluate work., • Ability to troubleshoot immediately and independently as machine problems come up at customer site (electrical/ programs/machine)., • Valid driver’s license and acceptable motor vehicle record. Work Environment While performing the responsibilities of the job, these work environment characteristics are representative of the environment the job holder will encounter. Reasonable accommodations may be made to enable people with disabilities to perform the essential functions of the job. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts and vehicles. The noise level in the work environment is usually quiet to moderate. The passage of employees through the work area is average and normal. Conclusion All employees are responsible for product quality and are required to understand and follow quality system procedures. All employees have the responsibility, organizational freedom, and authority to initiate action to prevent the occurrence of any non-conformities relating to product, process, and quality system. This job description is intended to convey information essential to understanding the scope of the job and the general nature and level of work performed by job holders within this job. But this job description is not intended to be an exhaustive list of qualifications, skills, efforts, duties, responsibilities or working conditions associated with the position. About Schneider At Schneider Packaging Equipment Company, Inc. (“Schneider”), we believe innovation starts with the consumer. This approach has propelled our success in developing real-world solutions that impact people’s daily lives. With 50 years of industry problem-solving in end-of-line automation, Schneider is a leading manufacturer of case packing and robotic palletizing solutions. Headquartered in Upstate New York, we design state-of-the-art machinery for customers in industries such as: food and beverage, dairy, pharmaceutical, personal care, plastics, and paper. To date, we have installed, and continue to support, over 3,500 world-class machines in some of the biggest manufacturing operations in the world. Driving solutions to address our customers’ specific issues pushes us to constantly innovate our machines, software, ancillary services and our company culture. SCH22 Compensation details: 25-50 Hourly Wage PIbf93b348ad86-38003-30281405

Eaton's ES GEIS CHD division is currently seeking a CNC Machinery Operator - 2nd shift. The core hours are 2:30 pm to 10:30 pm. The hourly rate for this position is $22.52 + $1.50 shift differential per hour. Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: JOB DESCRIPTION: Setup and operate conventional machines; and operate only NC and CNC and automatic chucking machines to perform a variety of turning, drilling, tapping, boring, reaming, threading, forming, facing, milling, slotting, grooving, chamfering, serrating and deburring operations to produce a variety of explosion proof parts of various materials. Machines include, but are not limited to, single spindle and multi-spindle drill presses and tappers, nameplate machine; cover machine; horizontal and vertical milling machines; spot welder; annealing oven; parts washers; multi-axis, multi-turret automatic and hand turret lathes, deburring grinder; automatic bar machines; and CNC turning centers. Position parts into chucks, fixtures or loading devices; move selection levers for prescribed speeds and feeds; initiate machining cycle and remove machined parts. Operation sequence is prescribed. Make adjustments, change, and reset tooling to maintain specified dimensions. Load castings and bar stock to insure continuous operation of equipment. Major adjustments and setups done by others, but may assist as directed. Operate weigh count scale, annealing oven, various hand and power tools; wash parts; assemble, pack and label various products as required. Maintain a supply of materials to machines and remove finished work as necessary to establish a flow through the cells. May instruct others in the performance of job duties. Refer to assembly drawings, wiring diagrams and machining blueprints to maintain tolerances. Check work periodically using fixed or adjustable gauges and visually inspect all parts for appearance and compliance to specifications; correct for any discrepancies. Exercise care to observe operations; note and refer improvements. Assist in isolating and correcting malfunctions in machining and control units. Perform similar or associated duties as required or directed. Assist in maintaining Material Replenishment System (MRS). Maintain accurate records and perform clerical functions as required. May produce move tickets, JAT's, etc. using the CRT. Record Standard Work, graph load charts and maintain visual controls. Maintain work area, machines and control units in a clean, neat and orderly condition. Perform Total Preventative Maintenance (TPM) activities as minor maintenance that includes cleaning, inspection, minor lubrication and tightening loose bolts. Administer the 5-S's. Follow standard or prescribed safety regulations. Refer all questionable cases to proper supervision. Duties involve application of some specialized knowledge and experience and the use of some judgment to comply with instructions or prescribed routines and to make minor decisions. Qualifications: Required (Basic) Qualifications: High School Diploma or General Education Development (GED) certificate. Minimum one(1) years' previous work experience in CNC operation Must be able to work in the United States without corporate sponsorship now and within the future. No relocation benefit is offered for this position. Only candidates residing within the immediate geographic area (50 miles) of Syracuse, NY will be considered for this position. Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc. We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton considers qualified applicants regardless of criminal histories, consistent with local laws. To request a disability-related reasonable accommodation to assist you in your job search, application or interview process, please call us at 1-800-836-6345 to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Eaton's ES GEIS CHD division is currently seeking a CNC Machinery Operator - 3rd shift. The core hours are 10:30 pm to 6:30 am. The hourly rate for this position is $22.52 + $1.50/hour shift premium per hour. What you'll do: • Perform a wide range of machining operations on two or more Numerically Controlled Lathes, Chuckers or Turning Centers, some of which may be equipped with automatic, robotic or manual load/unload systems and/or related secondary auto/manual equipment., • Operate Six Spindle Automatic Bar Machines., • Work with operation sheets, tapes and blueprints as required., • Required to change tooling, load automatic tool changes and maintain quality standards by checking parts with adjustable or fixed gauges., • Assist in isolating and correcting malfunctions in machining and control units., • Perform various internal operations related to producing a finished product., • Work from standard work and maintain visual controls and aids (charts, schedules, etc.) and accurate records as directed., • Maintain work area, machines and control units in a clean, neat and orderly condition., • Perform minor maintenance that includes cleaning, inspection, minor lubrication and tightening loose bolts. Qualifications: Basic (Required) Qualifications: • Minimum one (1) years' previous work experience in CNC operation, or graduate of a CNC certificate program, • High school diploma or GED, • No relocation benefit is offered for this position. Only candidates residing within the immediate area of Syracuse, NY (50 miles) will be considered for this position., • Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc. We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at 1-800-836-6345 to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Eaton's ES GEIS CHD division is currently seeking a NC/CNC Machine Operator - 3rd Shift. The core hours are 10:30pm to 6:30am. The hourly rate for this position is $22.52 + $1.50/hour shift premium per hour. Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: • Perform a wide range of machining operations on two or more Numerically Controlled Machines., • Assist in the setting up of the equipment as directed and work with operation sheets, tapes and blueprints as required., • Change tooling, load automatic tool changes and maintain quality standards by checking parts with adjustable or fixed gauges., • Assist in isolating and correcting malfunctions in machining control units., • Perform various internal operations related to producing a finished product., • Maintain work area, machines and control units in a clean, neat and orderly condition and move material to and from workstations., • Perform Total Productive Maintenance (TPM) activities such as minor maintenance that includes cleaning, inspection, minor lubrication and tightening loose bolts., • Duties involve application of some specialized knowledge and experience and the use of judgment to plan and perform sequence of operations or procedures within limits of standard or recognized methods and established precedent. Qualifications: Basic (Required) Qualifications: • High school diploma or GED, • Minimum one(1) years' previous work experience in CNC operation, • No relocation benefit is offered for this position. Only candidates residing within the immediate area of Syracuse facility (50 miles) will be considered for this position., • Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc. #IND123 We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton considers qualified applicants regardless of criminal histories, consistent with local laws. To request a disability-related reasonable accommodation to assist you in your job search, application or interview process, please call us at 1-800-836-6345 to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Eaton's ES GEIS CHD division is currently seeking a NC/CNC Machine Operator-2nd shift. The hourly rate for this position is $25.89 per hour. Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: Description: • Setup and operate CNC machines to perform a variety of drilling, boring, reaming, threading, facing, and milling operations following specific instructions., • Setups are exacting but easy to obtain using either developed fixtures or standard work holding devices. Review operations sheet data, programs and blueprints., • Setup and work through new programs as needed. Load programs and set controls for manual operation, • Occasionally uses Work Flow for reference purposes as required., • Change collets and/or chucks, load and adjust tools as necessary., • Initiate and ensure accurate tool settings and tape data input., • Adjust machine settings using manual data input to correct variations., • Make minor edits to program including work shift correction and z-depth excluding thread milling depths and diameter edits., • Note and refer to correction discrepancies between operations sheet data and programmed operation., • Check the first piece using fixed or adjustable gauges and obtain approval from appropriate supervision prior to initiating production runs. Exercise care to observe operation and note and refer improvements., • Inspect output at prescribed intervals. Retrieve tooling and gauges from crib., • Preset and ensure accuracy of your own tooling., • Replace drills, taps, reamers, inserts and inspects and replace if worn., • Move materials to and from machines., • Assist in isolating and correcting malfunctions in machinery and control units., • Perform similar or associated duties as required or directed, including the operation of auxiliary equipment such as manual tapping arms, grinders, and sanders., • Operate forklift trucks as required in the performance of job duties., • Participate in continuous improvement programs for the area., • Maintain work area, machines, and control units in clean, neat and orderly conditions., • Perform Total Productive Maintenance (TPM) activities such as minor maintenance that includes cleaning, inspection, minor lubrication, and tightening loose bolts., • Administer the 5-S's, including sweeping and mopping floors around machine perimeter., • Perform preventative maintenance functions as required., • Follow prescribed or standard safety regulations. Complete training as assigned. Qualifications: Required (Basic) Qualifications: • High School Diploma or General Education Development (GED) certificate., • 3-5 years of previous experience with CNC setup, • Ability to read and use blueprints and calipers Preferred Qualifications: • Additional educational or vocational training is a plus but not required. Skills: Physical and Environmental Factors: • Occasional lifting of parts up to 25 pounds., • Most parts typically weigh 5 pounds or less., • Most lifting of material is utilized by a hoist., • Prolonged standing throughout the shift., • Repetitive motions involving the use of hand tools during the respective build. Eligibility: • No relocation benefit is offered for this position. Only candidates residing within the immediate area of Syracuse, NY (50 miles) will be considered for this position., • Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc. We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at 1-800-836-6345 to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Eaton's ES GEIS CHD division is currently seeking a Screw Machine Operator - 2nd shift. The core hours are 2:30pm to 11:00pm Monday through Friday. The hourly rate for this position is $22.52 + $1.50/hour shift premium per hour. Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: Responsible for directing, assisting, and leading a group of employees performing various machining operations. Ensures workflow efficiency, quality standards, and adherence to safety protocols. Performs minor machine adjustments and supports production continuity. • Perform threading, grooving, chamfering, turning, tapping, reaming, serrating, boring, facing, drilling, and similar operations on departmental conventional machines excluding hand turret., • Produce a variety of parts from a variety of materials., • Make minor tooling adjustments and resets to maintain specified dimensions., • Inspect first pieces and verify machine setup before releasing to operators., • Adhere to machine safety procedures., • Operate Single and Multi-Spindle Drill Presses and other conventional machines., • Load castings and bar stock to maintain continuous machine operation., • Wash and pack plated parts to support machine cycles., • Use measuring instruments (e.g., micrometers, verniers, scales) to verify part accuracy., • Detect and report faulty operations or materials., • Operate fork truck and hand trucks to move materials., • Maintain clean, safe, and organized work area., • Perform TPM activities including cleaning, inspection, lubrication, and tightening of bolts., • Perform base clean outs as needed. Qualifications: Basic (Required) Qualifications: • A minimum of one (1) year of experience in machining operations., • Must have a high school diploma or GED from an accredited institution., • Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc., • No relocation benefit is offered for this position. Only candidates residing within the immediate area of Syracuse, NY (50 miles) will be considered for this position. Position Criteria: • Ability to read and interpret blueprints and work instructions., • Proficient in using measuring instruments and maintaining tolerances., • Basic computer skills for data entry and reporting. Physical Requirements: Regularly required to stand, walk, bend, and lift up to 50 lbs. Exposure to manufacturing environment including noise, dust, and temperature variations. Use of personal protective equipment (PPE) as required. #IND123 We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at 1-800-836-6345 to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

The CNC Programmer develops the programs and manufacturing instructions used to produce machined parts and sub-assemblies on horizontal and vertical machining centers, in line with engineering drawings and specifications. The role sets process sequences and defines tooling, gauging, and machine needs, mostly for aluminum castings and some aluminum billet. The programmer also works on the shop floor with the team to solve problems and improve processes. CNC Programmer Responsibilities • Write medium- to high-complexity CNC programs in 3+ axis CAM software, working offline and simulating at the PC so programs run collision-free and minimize machine time., • Support CAM operations: load programs to controls, assist with setup and prove-out, secure first-piece approval, and hand production over to the operator., • Diagnose and troubleshoot programs, and modify existing ones to improve efficiency., • Review drawings and specifications for manufacturability, and recommend changes that boost productivity., • Study how parts are made and recommend improvements to equipment, methods, materials, and designs., • Partner with Quality to build reliable CMM and manual inspection processes., • Produce setup and work instructions for machinists, and maintain records such as tooling lists., • Verify programs through simulation before posting code, and set speeds and feeds from manufacturer cutting data., • Support the ISO quality management system., • Follow all safety policies, wear PPE, and keep the work area clean., • Maintain reliable attendance, follow company policies and standards of conduct, and stay professional with internal and external contacts. CNC Programmer Qualifications • AAS in a mechanical technology field, or equivalent experience and a proven ability to program and machine complex geometry., • About four years of CNC programming experience preferred, ideally with Mastercam., • Strong CNC programming and blueprint-reading skills., • Solid math skills (algebra, trigonometry, physics) and good problem-solving ability., • Excellent time management, organization, planning, and written and verbal communication., • Highly detail-oriented, able to work with little supervision, and knowledgeable about job-related safety measures., • The role alternates between walking and prolonged desk work. You must be able to lift up to 35 pounds as needed.

Job DescriptionJob Description This is specialized clerical work in the receipt and review of input data, control and set up of input for computer processing, and the review of outputs for user departments and/or agencies. An employee in this class is expected to independently carry out routine duties after initial orientation and on-the-job training, under the general supervision of a Control Clerk Supervisor or other administrative superior. The employee reviews and processes work according to prescribed procedures and standards of product quality. Required logs and reports are also maintained of all work received and processed for-user agencies. Work is reviewed through a check of product quality. This class exercises no supervision. However, more experienced personnel may assist in training new staff. Depending upon area of assignment, the employee may be responsible for direct contact with users to resolve input errors, provide information and assist in the completion of standard input forms. Such contact may be limited or extensive depending upon specific job assignment. Standards for the review and processing of input and output may vary as well. For example, employees in the Board of Cooperative Educational Services are required to thoroughly review the intermediate results of computer processing (edits) and to follow-up on errors with the user before the final product is processed and disbursed. Employees in other locations review output only for adherence to type of output requested, legibility and identification of user to receive reports. Employees may be required to operate a variety of data processing equipment such as bursters, decollators, sorters, optical scanners and visual display terminals. The operation of this equipment can be learned on the job and no prior knowledge is required. Does related work as required. Typical Work Activities • Receives and logs input for computer processing from user agencies and/or departments., • Reviews input according to prescribed procedures and using written standards to determine acceptability of source documents., • Maintains control over input received, job requests and all other information and materials related to the processing of input so that all work is properly accounted for., • Sorts input and distributes to appropriate operations personnel for processing., • Reviews outputs according to prescribed procedures and standards of acceptability., • Prepares output for disbursal to users that may involve operation of bursters, decollators, folders, joggers, and shredders or check writers., • Maintains logs of incoming and outgoing materials for tracking purposes, record of processing time and other information as required by agency standards., • Assists user agency personnel in the completion of standard input forms, resolving clerical errors in the processing of computer data, and providing general information., • Contacts user agency personnel, usually by telephone, to correct improperor missing data input and to resolve errors that appear on edits., • Ensures the orderly flow of production work through the data processing facility by examining problems and initiating corrective action within operations or with user., • Use personal computer or on-line terminal to input, edit, verify or update data electronically to a database for processing purposes., • May assist supervisors in the training of user agency and personnel., • May perform basic office duties such as answer phone, file reports, type and distribute letters., • May perform basic arithmetic computations such as addition, subtraction, multiplication or division through the use of electronic calculators., • Transfers numerical and/or alphabetical data from one document to another using keypunch machine, visual display terminal or similar equipment., • Checks newly entered data against source documents and verify accuracy of data entered either visually or by user of computer-produced error listing.Knowledge, Skills, and Abilities, • Good knowledge of the principles and practices of data processing as related to the processing of input and output., • Good knowledge of clerical procedures as related to data processing with emphasis on code matching and basic arithmetic skills., • Ability to maintain records of all inputs, outputs and in process programs., • Ability to maintain control on all acceptable input., • Ability to organize ones work in a logical manner and according to established priorities., • Ability to express oneself clearly and concisely, both verbally and in writing., • Ability to maintain accurate records and logs., • Ability to learn the operation of basic data processing equipment.Minimum Qualifications Promotion: Six (6) months of permanent competitive class status as a Data Entry Equipment Operator. Open-Competitive: A) Successful completion of nine (9) semester credit hours from a regionally accredited or New York State registered college, university, or business school in computer science, accounting, office management, or a closely related field; or, B) Six (6) months of work experience, or its part time equivalent, in data processing product support or the clerical processing of computer input and output products (such as control clerk, job set-up clerk, computer aide, data entry equipment operator, etc.); or, C) Six (6) months of clerical work experience, or its part-time equivalent, in detailed record keeping or bookkeeping which must have included responsibility for reviewing, verifying or looking up information on computer outputs or visual display terminals. Benefits • Dental insurance, • Health insurance, • Paid time off, • Parental leave, • Vision insurance, • Retirement plan The Affirmative Action Policy of the City of Syracuse is to provide equal employment opportunity for all individuals regardless of race, color, sex, religion, creed, age (18 and over), marital status, national origin, disability, veteran status, gender identity or gender expression, sexual or affectional preference or orientation, or any other classified group within the protected class. The City also complies with 31 CFR part 51. If you have a disability for which you wish special accommodation to be made, contact the Office of Human Resources at 315-448-8780 or personnel@syr.gov. All offers of employment will be contingent on the successful completion of a background check and/or drug screen. Job Posted by ApplicantPro

TikTok Shop Strategist – JTS Growth About Us JTS Growth is one of the leading TikTok Shop agencies in the U.S., specializing in launching, scaling, and managing top food, beverage, and supplement brands on TikTok Shop. Notable clients include Mike's Hot Honey, Fishwife, Krave Beauty, Gramms Protein, and many more We act as a fractional Head of TikTok Shop for our clients - owning everything from affiliate strategy and content to backend operations and revenue growth. We currently support 40+ brands and are rapidly scaling our client base and internal team. We’re hiring an TikTok Shop Strategist to own execution and performance across a portfolio of brands. Role Overview You will be responsible for driving performance across multiple TikTok Shop accounts through strong execution, clear communication, and continuous optimization. This is a client-facing, operator role - not a task-based or administrative position. You will: • Own account performance (GMV growth, views, affiliate content quality and quantity), • Own client communication, • Manage and direct internal teams (internal affiliate management team, promotions and campaign registration, and other back end work) to ensure all execution is aligned with strategy and performance goals, • Identify areas for process improvement and improve it, • Identify what is limiting growth and fix it Responsibilities 1. Client Management & Communication • Serve as the primary point of contact for assigned client accounts, • Lead weekly client calls and provide clear performance updates, • Maintain proactive, high-quality communication (email, Slack, reporting), • Set expectations and ensure clients understand strategy, progress, and next steps 1. Account Performance & Execution • Own day-to-day performance across accounts, including:, • Content alignment, • Affiliate performance, • Offer strategy (bundles, pricing, discounts), • Monitor performance and identify opportunities to improve GMV, • Identify which part of the system is limiting growth (content, affiliates, or offer) and take action 1. Affiliate Strategy & System Ownership • Own the affiliate growth strategy across assigned accounts, • Oversee the affiliate team responsible for:, • Creator outreach, • Sample seeding, • Follow-ups and activation, • Define and continuously improve:, • Outreach messaging and targeting, • Creator qualification criteria, • Sample approval standards, • Scaling and re-engagement strategies, • Identify bottlenecks (low response rate, low posting rate, low conversion) and solve them, • Analyze which creators are driving revenue and ensure the team doubles down You are not executing outreach - you are designing and optimizing the system that drives it. 1. Content Alignment & Coordination • Work closely with the content team to ensure output aligns with overall account strategy, • Communicate:, • What is working (based on performance data), • What needs to be tested or adjusted, • Review and approve content to ensure it is aligned with:, • Proven formats, • Offer strategy, • What is currently converting on TikTok Shop, • Ensure consistent and timely content output across all accounts You are not responsible for coming up with creative ideas - you are responsible for making sure content aligns with what is working and driving revenue. 1. Promotions, Campaigns & Paid Strategy Oversight • Oversee execution of:, • TikTok Shop promotions and discounting, • Campaign participation and setup, • GMV Max campaign setup and management, • Review work completed by internal teams to ensure accuracy and effectiveness, • Provide clear direction on:, • When to run promotions, • How to structure offers, • When and how to scale paid efforts, • Ensure all promotional and paid activity aligns with overall account strategy You are not setting these up yourself - you are ensuring they are set up correctly and driving results. 1. Reporting, Analysis & Performance Oversight • Oversee reporting handled by internal teams, including:, • Weekly dashboards, • Performance tracking, • Data accuracy, • Review reports to identify:, • What is working, • What is underperforming, • Where adjustments need to be made, • Translate performance data into clear actions across:, • Affiliate strategy, • Content direction, • Promotions and offers, • Communicate insights clearly to clients and internal teams You are not building reports - you are interpreting them and driving decisions from them. 1. Systems Management & Team Coordination • Manage execution through internal teams (affiliate team, content, reporting), • Oversee all backend operations, including:, • Affiliate outreach, • Reporting updates, • Promotions and campaign setup, • GMV Max execution, • Ensure all work is completed accurately, on time, and aligned with strategy, • Audit workflows and continuously improve processes, • Create structure so execution runs smoothly without constant oversight 1. Process Optimization & Scalability • Turn what’s working into repeatable systems, • Continuously refine workflows to improve efficiency and results, • Reduce friction across affiliate, content, and reporting processes, • Contribute to building scalable playbooks across accounts Qualifications • Experience in TikTok, influencer marketing, or social commerce, • Strong understanding of short-form content and what converts, • Highly organized with ability to manage multiple accounts at once, • Strong communication skills (client-facing), • Data-driven mindset - you can interpret performance and act on it, • Comfortable in a fast-paced, high-growth environment, • High ownership mindset - you take responsibility for outcomes, not just tasks What Success Looks Like (3–6 Months) • You are independently managing multiple client accounts, • Clients are seeing consistent GMV growth, • Affiliate systems are running efficiently with strong creator output, • Content production is aligned with what drives performance, • Backend execution (VAs) is accurate, efficient, and well-directed, • Minimal oversight needed from leadership What We Offer • Opportunity to work with fast-growing consumer brands, • Direct exposure to high-level TikTok Shop strategy and execution, • Fast-paced, high-ownership environment, • Clear path to increased responsibility and growth Final Note This role is for someone who wants to own accounts, drive real revenue, and operate like a builder inside a high-performance environment. If you’re looking for a passive or purely administrative role, this is not it. If you want ownership, speed, and direct impact on growth - we’d love to talk.

MentorcliQ is looking for an experienced, data-driven Director of Revenue Operations to lead the operational engine behind our Go-to-Market (GTM) organization. This hands-on leadership role will own the systems, processes, data and operating rhythms that enable Marketing, Sales, Customer Success, Account Management and Finance teams to execute more effectively. This position will report to the SVP, Business Operations and be responsible for improving GTM efficiency, increasing operational rigor and creating greater visibility into business performance leveraging innovative AI solutions across the teams. You’ll partner closely with executive and revenue leadership, day to day alignment with marketing operations to improve lead generation, system connecting and help drive forecasting, GTM workflows and strengthen weekly reporting for improved operational cadences. The ideal candidate is a builder and operator who enjoys solving complex business problems, turning data into action and driving continuous improvement. You are equally comfortable advising leadership teams, improving cross-functional processes, and rolling up your sleeves to enhance systems and workflows. You are also excited about leveraging AI and automation to improve productivity, insights, and decision-making across the revenue organization. About the Team Revenue Operations will be critical to the growth of MentorcliQ in the market. The function will coordinate designing of the process, scale the systems, and produce the analytics and strategic recommendations that let Sales, Customer Success, Implementation, and Support work cleanly. Today, this work is distributed across multiple people. This role pulls it together under one strong builder, strategic thinker, and analytical leader. What You'll Own GTM Operations & Efficiency • Build and continuously improve the operating model that supports MentorcliQ's Go-to-Market organization., • Partner with Marketing, Sales, Customer Success, Account Management, and Finance leaders to identify opportunities to improve efficiency, alignment, and execution., • Design scalable processes and workflows that improve pipeline management, sales execution, customer expansion, retention, and the overall customer lifecycle., • Drive operational rigor across forecasting, pipeline reviews, territory planning, capacity planning, and revenue performance management. Systems, Data & Technology • Own the strategy, governance, and continuous improvement of MentorcliQ's GTM technology ecosystem., • Lead and develop the Salesforce Administrator while managing internal and external resources supporting our revenue systems., • Ensure our CRM, sales, marketing, customer success, and AI productivity platforms are scalable, well-adopted, and aligned with business needs., • Improve data quality, system adoption, integrations, and workflow automation across the revenue organization. Business Intelligence & Planning • Build reporting frameworks, dashboards, and analytics that provide leadership with visibility into GTM performance and business health., • Own insights across key SaaS metrics, including ARR, pipeline performance, forecast accuracy, customer retention, and GTM efficiency., • Translate data into recommendations that improve business decisions and outcomes., • Partner with Finance on forecasting, planning, and executive reporting., • Executive Partnership & Continuous Improvement., • Serve as a strategic partner to the Revenue Leadership Team., • Lead recurring pipeline and performance reviews., • Identify operational challenges and opportunities before they impact business performance., • Drive accountability around GTM processes, metrics, and execution., • Help MentorcliQ leverage AI and automation to improve how our revenue teams operate. What Success Looks Like Within your first year, you will: • Ideate and create AI agents that streamline internal processes, automate updating of systems and workflows that create efficiencies within GTM (removing manual and duplication of data entry)., • Segment and ICP analysis of signals, win / loss trends that help new and growth sales leadership drive higher win rates and predictable forecasts (90%+ accuracy)., • Increase predictability of forecasting by analyzing historical conversion rates, creating visibility and action to improve conversion across the sales process., • Establish scalable reporting, processes, and operating rhythms across Revenue teams., • Strengthen adoption and effectiveness of our GTM systems and technology., • Become a trusted operational advisor to the CRO, Revenue Leadership Team, and Finance. What We're Looking For • 8+ years in Revenue Operations, Sales Operations, or GTM Operations., • 3 - 5+ years leading Revenue Operations in a B2B SaaS company., • Experience partnering with executive leadership and cross-functional GTM teams., • Experience managing Salesforce administrators, operations resources, or technology partners., • Strong understanding of SaaS metrics, including ARR, NRR, GRR, CAC, pipeline coverage, win rates, ASP, and forecast accuracy., • Experience with revenue forecasting, territory planning, capacity planning, and sales compensation., • Strong analytical and business acumen with the ability to turn insights into action., • Experience optimizing GTM systems, processes, and data governance., • Experience working in a high-growth or private equity-backed software company preferred., • Track record of building and leveraging AI for business optimization and revenue improvement; including creating a roadmap of building and managing AI in our daily operational rhythm., • Experience with Salesforce, Gong, Gainsight., • Experience of Marketo and Lean Data a plus (partnership with marketing operations). Why This Role Matters Revenue Operations is the operating foundation of MentorcliQ's Go-to-Market organization. This leader will help shape how we scale by bringing greater visibility, discipline, and efficiency to our revenue engine. You won't just report on the business - you'll help improve it. Through stronger systems, better processes, and data-driven insights, you will help our teams make better decisions, execute more effectively, and build a more predictable path to growth. What’s In It for You? • Total compensation of 200k+, • Company bonus opportunities, • Health, dental, and vision plans, • 12 paid company holidays, generous vacation time, and sick/mental health days, • 8 weeks of paid parental leave, • 401(k) with company match, • Short-term and long-term disability, • Life insurance, • Employee development programs, • Employee charitable donation matching, • Innovative, inclusive, and inspiring people, • A global team with the flexibility to work remotely

SRCTec, LLC is seeking an experienced Field Service Representative to become one of two OEM representatives supporting local units at Fort Campbell, KY. SRCTec designs, manufactures, and supports cutting-edge radar and sensor systems for a global commercial and defense customer base. The ideal candidate will independently deliver high-quality pre- and post-sales technical support through product demonstrations, comprehensive training, field support, and remote assistance. The candidate will primarily integrate with assigned units providing technical and training support in garrison and deployed CONUS and OCONUS locations (excluding danger zones). This role also involves creating technical content to drive customer success and providing on-site consultation oversight and integration support for hardware, software, network configurations, and new system initiatives. This position is tied to our customer's military base in Kentucky, and the work will be performed onsite at the customer's location. This position reports to a supervisor in Syracuse, New York and is funded through December 2026. Continued employment beyond that date is contingent upon the annual renewal or re-award of the current contract. What You'll Do • Conduct field training and service support at customer locations, both domestically and internationally, often as a solo or lead representative, • Collaborate closely with customers and end users to define and document requirements, working with internal teams to deliver tailored solutions that meet quality, cost, and schedule goals, • Thrive in a collaborative, customer-focused engineering culture, contributing to team efforts to enhance product usability and sustainment, • Respond promptly to customer operational needs, including last-minute travel to potentially austere field sites, • Perform advanced troubleshooting, system/sub-system analysis, and component-level diagnostics, • Provide technical expertise to engineering, quality, configuration management, and subcontract teams to ensure seamless operations, including guidance on handling, installation, and utilization of various systems and equipment, • Develop and document detailed test plans, technical performance assessments, and after-action reports to drive continuous improvement, • Provide on-site consultation oversight and integration support for existing hardware, software, network configurations, and new system initiatives for all sites within area of responsibility, • Advise on technical requirements for products and services, support equipment, and electronic equipment installations, • Assist in the development and ensure adherence to area-wide procedural/policy changes, • Work independently to achieve day-to-day objectives with impact on operational results or project deliverables, • Develop technical solutions requiring collaboration with internal experts and deep analyses of impact on end-product/solution What You'll Bring • Associate's degree, vocational certification, or military experience in an engineering-relevant field with 4+ years of engineering-related experience, or Bachelor's degree in an engineering-related field with 2+ years of work experience (equivalent combination of education, training, and experience considered, such as experience with radar, RF-based, communication, or navigation systems), • Deep understanding of and ability to apply principles, theories, and concepts of technical domain, with broad understanding of other related specialty areas, • Proficiency with test equipment such as multimeters, network analyzers, spectrum analyzers, signal generators, and oscilloscopes to diagnose electrical and electronic system issues, • Ability to interpret electronic schematics, mechanical drawings, test/assembly instructions, specifications, and engineering documentation with accuracy, • Ability to synthesize technical product knowledge and customer field experience to assist the development of technical manuals and training material content, • Excellent written and verbal communication skills, paired with a customer-centric approach to service, including communicating with internal and client project team members to influence solution design, process, and approaches, • Self-driven with strong time management and organizational skills to independently manage in-track tasks, • Ability to work independently and collaboratively within cross-functional teams, interacting frequently with engineering, SMEs, and customers, • Experience delivering technical training or certification as an assistant instructor for operator and maintenance training courses, • Ability to lift, move, and walk with a minimum of 50 pounds, climb towers, and tolerate long flights and periodic long workdays, with or without reasonable accommodations, • Advanced computer skills, including MS Office suite, and a firm understanding of TCP/IP networking, • Willingness to travel up to 75% (domestic and international), including potential extended assignments at military or customer locations in austere environments (desert, arctic, or other extreme conditions) with associated environmental and biological hazards, • Must have U.S. passport and DoW Secret security clearance, • Must be able to pass a pre-deployment physical Ways to Stand Out • Military experience preferred but not required What Sets Us Apart? SRCTec, LLC is a manufacturing and life cycle management company specializing in the cost-effective production of high-quality, high-reliability, advanced military electro-mechanical products. SRCTec is a wholly owned subsidiary of SRC, Inc. SRC is a not-for-profit research and development company that combines information, science, technology and ingenuity to solve "impossible" problems in the areas of defense, environment and intelligence. Across our family of companies, we apply bright minds, fresh thinking and relentless determination to deliver innovative products and services that are redefining possible . When you join our team, you'll be a part of something truly meaningful helping to keep America and its allies safe and strong. You'll collaborate with more than 1,400 engineers, scientists and professionals with 20 percent of those employees who have served in the military in a highly innovative, inclusive and equitable work environment. You'll receive a competitive salary and comprehensive benefits package that includes four or more weeks of paid time off to start, 10 percent employer contribution toward retirement, and 100 percent tuition support. Total compensation for this role is market competitive. The anticipated salary range for this position based out of Syracuse, NY is estimated at $75,000 to $91,000 annually. The actual salary will vary based on applicant's experience, skills, and abilities, geographic location as well as other business and organizational needs. SRC offers competitive benefit options, for more details please visit our website.

Job DescriptionDescription: Altitude Access Solutions Inc., the new operator of the Syracuse Hancock International Airport parking operation, is growing and seeking dedicated, hardworking individuals to join our team. As our operations expand, we have multiple new positions available. We are looking for part time Shuttle Drivers who take pride in their work, value excellent customer service, and enjoy contributing to a positive, reliable, and safety-focused environment. The Shuttle Driver is responsible for the safe transportation of passengers while delivering excellent customer service and maintaining vehicle safety, cleanliness, and complying with standard procedures and policies at Syracuse Hancock International Airport (SYR). SYR is a 24/7 operation, and this position may have special shift requirements such as working second and third shift, as well as weekends, and holidays. Essential Functions/Duties/Responsibilities: • Safely operate airport shuttle vehicles to transport passengers between parking facilities and terminal locations, • Provide excellent customer service, assisting passengers with questions, directions, luggage, and accessibility needs, when necessary, • Adhere to all airport safety regulations, traffic laws, and organizational driving standards., • Maintain adequate fuel levels and ensure tank is full at end of each shift, • Maintain the cleanliness of the bus’s interior and exterior, ensuring a professional and comfortable environment for passengers and staff, • Monitor passenger/staff counts and maintain accurate logs, • Complete a Driver Vehicle Inspection Report (DVIR) before and after each shift and report any mechanical or safety concerns immediately, • Maintain thorough knowledge of the Airport layout, terminal, traffic patterns, and operational procedures, • Communicate effectively with dispatch and supervisors, reporting delays, incidents, or operational updates in real time, • Respond calmly and appropriately to emergencies, such as medical issues or vehicle incidents, following all safety protocols, • Assist during peak traffic periods, helping maintain efficient workflow and minimizing wait times for passengers, • Support airport events and special operations, providing additional transportation services as needed, • Secure lost-and-found items, following proper documentation and handoff procedures, • Responsible for possessing and maintaining a valid state-issued driver’s license that is to be carried with the driver at all times while on duty, • Provide excellent customer service to passengers by answering any questions that arise. If needed, escalate any customer issues to supervisor/manager, • Report any known accidents and safety hazards to supervisor/manager, • Communicate quickly and effectively any debris, water, and/or oil spills to the garage office, • Executes additional responsibilities as assigned to support operational continuity and organizational objectives Due to weather events and operational emergencies, employees may be required to work extended hours or mandatory overtime to maintain safe operations. Requirements: • Ability to read and comprehend instructions, short correspondences, and memos, • Strong verbal and written communication skills, • Excellent customer service skills, • Develop and maintain thorough knowledge of the parking lots, and surrounding area, including major streets, landmarks, and freeways, • Ability to function well in a fast-paced environment, • Ability to perform basic math functions, such as addition, subtraction, multiplication and division. Ability to perform these operations using units of American money, when necessary. Physical Requirements: • Physically able to drive the vehicle required for the position, • Standing and walking regularly, • Sitting regularly, • Occasionally climbing or balancing, • May be required to occasionally lift and move up to 75 lbs., • Ability to assist passengers with mobility needs, including use of ramps or lifts when applicable. Education and Experience Required: • High school diploma or equivalent, • At least two years’ experience driving a shuttle bus or similar vehicle required Special Requirements: • Valid NYS driver’s license for the class of vehicle being driven and acceptable DMV record, • Subject to drug-testing per company policy, • Ability to work second and/or third shift, as well as weekends and holidays, • Ability to report for duty during severe weather events and emergencies, including working mandatory overtime, • Maintain a clean Motor Vehicle Record (MVR) in accordance with company and Airport standards, • Possess a valid DOT Medical Examiner’s Certificate or ability to obtain and maintain one as a condition of employment, • Must successfully complete E- Verify I9 process. We will provide E-Verify and the federal government with your I-9 information to confirm that you are authorized to work in the U.S *Any offer of employment would be contingent on passing a security clearance background check and pre-employment drug test. Preferred Qualifications • Previous experience working at an airport., • Previous professional driving experience, especially in shuttle, transit, or commercial driving roles., • Customer service experience, ideally in hospitality, transportation, or airport environments., • Ability to use communication devices, such as radios, tablets, or dispatch systems. Employee Benefits (eligibility dependent on employment type): • Paid time off, • Paid holidays, • Medical/Dental/Vision, • NYS Deferred Compensation Plan 457(b) with employer 401(a) match, • Paid Family Leave, • Employee Assistance Program, • Flexible Spending Accounts, • Supplemental Insurance, • Night Shift Differential. $1.00/night shift differential for the overnight shift EEO Statement: Altitude Access Solutions, Inc. is committed to equal employment opportunity and leveraging the talent of a diverse workforce to serve the traveling public at Syracuse Hancock International Airport. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran, or any other basis protected by Federal, State or Local law. We encourage individuals from all backgrounds to apply.

Job DescriptionDescription: Altitude Access Solutions Inc., the new operator of the Syracuse Hancock International Airport parking operation is growing and seeking dedicated, hardworking individuals to join our team. As our operations expand, we have multiple new positions available. We are looking for full time Shuttle Drivers who take pride in their work, value excellent customer service, and enjoy contributing to a positive, reliable, and safety-focused environment. The Shuttle Driver is responsible for the safe transportation of passengers while delivering excellent customer service and maintaining vehicle safety, cleanliness, and complying with standard procedures and policies at Syracuse Hancock International Airport (SYR). SYR is a 24/7 operation, and this position may have special shift requirements such as working second and third shift, as well as weekends, and holidays. Essential Functions/Duties/Responsibilities: • Safely operate airport shuttle vehicles to transport passengers between parking facilities and terminal locations, • Provide excellent customer service, assisting passengers with questions, directions, luggage, and accessibility needs, when necessary, • Adhere to all airport safety regulations, traffic laws, and organizational driving standards., • Maintain adequate fuel levels and ensure tank is full at end of each shift, • Maintain the cleanliness of the bus’s interior and exterior, ensuring a professional and comfortable environment for passengers and staff, • Monitor passenger/staff counts and maintain accurate logs, • Complete a Driver Vehicle Inspection Report (DVIR) before and after each shift and report any mechanical or safety concerns immediately, • Maintain thorough knowledge of the Airport layout, terminal, traffic patterns, and operational procedures, • Communicate effectively with dispatch and supervisors, reporting delays, incidents, or operational updates in real time, • Respond calmly and appropriately to emergencies, such as medical issues or vehicle incidents, following all safety protocols, • Assist during peak traffic periods, helping maintain efficient workflow and minimizing wait times for passengers, • Support airport events and special operations, providing additional transportation services as needed, • Secure lost-and-found items, following proper documentation and handoff procedures, • Responsible for possessing and maintaining a valid state-issued driver’s license that is to be carried with the driver at all times while on duty, • Provide excellent customer service to passengers by answering any questions that arise. If needed, escalate any customer issues to supervisor/manager, • Report any known accidents and safety hazards to supervisor/manager, • Communicate quickly and effectively any debris, water, and/or oil spills to the garage office, • Executes additional responsibilities as assigned to support operational continuity and organizational objectives Due to weather events and operational emergencies, employees may be required to work extended hours or mandatory overtime to maintain safe operations. Requirements: • Ability to read and comprehend instructions, short correspondences, and memos, • Strong verbal and written communication skills, • Excellent customer service skills, • Develop and maintain thorough knowledge of the parking lots, and surrounding area, including major streets, landmarks, and freeways, • Ability to function well in a fast-paced environment, • Ability to perform basic math functions, such as addition, subtraction, multiplication and division. Ability to perform these operations using units of American money, when necessary. Physical Requirements: • Physically able to drive the vehicle required for the position, • Standing and walking regularly, • Sitting regularly, • Occasionally climbing or balancing, • May be required to occasionally lift and move up to 75 lbs., • Ability to assist passengers with mobility needs, including use of ramps or lifts when applicable. Education and Experience Required: • High school diploma or equivalent, • At least two years’ experience driving a shuttle bus or similar vehicle required Special Requirements: • Valid NYS driver’s license for the class of vehicle being driven and acceptable DMV record, • Subject to drug-testing per company policy, • Ability to work second and/or third shift, as well as weekends and holidays., • Ability to report for duty during severe weather events and emergencies, including working mandatory overtime, • Maintain a clean Motor Vehicle Record (MVR) in accordance with company and Airport standards, • Possess a valid DOT Medical Examiner’s Certificate or ability to obtain and maintain one as a condition of employment, • Must successfully complete E- Verify I9 process. We will provide E-Verify and the federal government with your I-9 information to confirm that you are authorized to work in the U.S. *Any offer of employment would be contingent on passing a security clearance background check and pre-employment drug test. Preferred Qualifications • Previous experience working at an airport., • Previous professional driving experience, especially in shuttle, transit, or commercial driving roles., • Customer service experience, ideally in hospitality, transportation, or airport environments., • Ability to use communication devices, such as radios, tablets, or dispatch systems. Employee Benefits (eligibility dependent on employment type): • Paid time off, • Paid holidays, • Medical/Dental/Vision, • NYS Deferred Compensation Plan 457(b) with employer 401(a) match, • Paid Family Leave, • Employee Assistance Program, • Flexible Spending Accounts, • Supplemental Insurance, • Night Shift Differential. $1.00/night shift differential for the overnight shift EEO Statement: Altitude Access Solutions, Inc. is committed to equal employment opportunity and leveraging the talent of a diverse workforce to serve the traveling public at Syracuse Hancock International Airport. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran, or any other basis protected by Federal, State or Local law. We encourage individuals from all backgrounds to apply.

Job DescriptionDescription: Altitude Access Solutions Inc., the new operator of the Syracuse Hancock International Airport parking operation is growing and seeking dedicated, hardworking individuals to join our team. As our operations expand, we have multiple new positions available. We are looking for Guest Experience Coordinators (full-time) who take pride in their work, value excellent customer service, and enjoy contributing to a positive, reliable, and safety-focused environment. The Guest Experience Coordinator serves as the primary customer service and administrative point of contact for guests utilizing airport parking facilities operated by Altitude Access Solutions (AAS). This position is responsible for delivering exceptional customer service by assisting guests with parking reservations, access issues, intercom communications, payment inquiries, and general parking-related questions. The Guest Experience Coordinator works in a technology-driven environment and plays a critical role in supporting the customer experience through systems such as BusGenius, QR-code reservation platforms, Designa parking access controls, and other customer service technologies. This position is primarily office-based and serves as the first point of contact for many customer interactions. Work Schedule: This position must have the ability to work the following assigned shifts: 7:00 a.m. to 3:30 p.m.; 3:00 p.m. to 11:30 p.m.; or 11:00 p.m. to 7:30 a.m., and must be available to work evenings, weekends, and holidays, as well as during severe weather events and emergencies as needed to support 24/7 operations. Essential Functions/Duties/Responsibilities Customer Service • Answer incoming customer calls, intercoms, and electronic inquiries regarding airport parking services., • Assist guests experiencing issues with reservation QR codes, parking access credentials, payment systems, and parking equipment., • Verify customer eligibility and remotely grant access or exits in accordance with established procedures for reservations, lost tickets and other approved exceptions. Document as required., • Provide guests with parking information, rates, directions, shuttle information, and other airport-related assistance., • Resolve customer concerns professionally and escalate complex issues to supervisors as necessary., • Document customer interactions and maintain accurate records of service requests and complaints. Administrative Support • Monitor parking management software and customer service platforms., • Assist with processing refunds, duplicate receipt requests, customer adjustments, and account inquiries in accordance with company policies., • Maintain records, reports, logs, and customer correspondence., • Manage the Monthly Parking Program with the utmost integrity and professionalism., • Generate daily and monthly operational reports as assigned., • Support data entry and administrative projects related to parking operations and guest services., • Assist with badge access records, lost ticket documentation, and reservation audits. Operations Support • Monitor parking occupancy levels and communicate operational issues to supervisors and other stakeholders., • Coordinate with shuttle drivers, maintenance staff, and supervisors regarding customer service matters., • Assist in emergency communications and incident documentation., • Support the implementation of new customer service initiatives and technologies., • Executes additional responsibilities as assigned to support operational continuity and organizational objectives.Requirements:, • Strong customer service orientation and conflict resolution skills., • Ability to remain calm and professional during stressful situations., • Excellent verbal and written communication skills, • Excellent organizational and multitasking abilities., • Strong attention to detail and accuracy., • Ability to exercise sound judgment when granting access or resolving customer issues., • Ability to work well under stress, • Ability to de-escalate difficult situations with customers, • Comfortable working with technology platforms, reservation systems, cameras, and access control systems., • Ability to communicate effectively with guests, airport tenants, airlines, and the public., • Good knowledge of Microsoft 365, including SharePoint, Teams, Excel, Word, and Outlook, • Ability to learn parking management, reservation, and access control software systems., • Ability to use communication devices, such as radios, tablets, or dispatch systems., • Ability to fluently read, write, speak, and understand English. Physical Requirements Ability to perform the physical requirements of the position with or without a reasonable accommodation, which may include but are not limited to: • Sedentary work that involves sitting/standing at a desk, • Repeating motions that may include eyesight, wrists, hands, and/or fingers., • Lifting up to 25 lbs. on occasion, • Being able to listen and speak clearly on a telephone or through a headset Education and Experience • High school diploma or GED required., • Associate's degree in Business Administration, Hospitality, Communications, or related field, preferred., • Two (2) years of customer service, hospitality, administrative support, parking operations, transportation, or airport-related experience preferred., • Proficiency with Microsoft Office applications. Special Requirements • Must successfully complete E- Verify I-9 process. We will provide E-Verify and the federal government with your I-9 information to confirm that you are authorized to work in the U.S. *Any offer of employment would be contingent on passing a security clearance background check. Full Time Employee Benefits • Paid time off, • Paid holidays, • Medical/Dental/Vision, • NYS Deferred Compensation Plan 457(b) with employer 401(a) match, • Paid Family Leave, • Employee Assistance Program, • Flexible Spending Accounts, • Supplemental Insurance, • Night Shift Differential. $1.00/night shift differential for the 11:00 p.m. - 7:30 a.m. shift. EEO Statement Altitude Access Solutions, Inc. is committed to equal employment opportunity and leveraging the talent of a diverse workforce to serve the traveling public at Syracuse Hancock International Airport. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran, or any other basis protected by Federal, State or Local law. We encourage individuals from all backgrounds to apply.

Job DescriptionDescription: Altitude Access Solutions Inc., the new operator of the Syracuse Hancock International Airport parking operation is growing and seeking dedicated, hardworking individuals to join our team. As our operations expand, we have multiple new positions available. We are looking for Guest Experience Coordinators (part-time) who take pride in their work, value excellent customer service, and enjoy contributing to a positive, reliable, and safety-focused environment. The Guest Experience Coordinator serves as the primary customer service and administrative point of contact for guests utilizing airport parking facilities operated by Altitude Access Solutions (AAS). This position is responsible for delivering exceptional customer service by assisting guests with parking reservations, access issues, intercom communications, payment inquiries, and general parking-related questions. The Guest Experience Coordinator works in a technology-driven environment and plays a critical role in supporting the customer experience through systems such as BusGenius, QR-code reservation platforms, Designa parking access controls, and other customer service technologies. This position is primarily office-based and serves as the first point of contact for many customer interactions. Work Schedule: This position must have the ability to work the following assigned shifts: 7:00 a.m. to 3:30 p.m.; 3:00 p.m. to 11:30 p.m.; or 11:00 p.m. to 7:30 a.m., and must be available to work evenings, weekends, and holidays, as well as during severe weather events and emergencies as needed to support 24/7 operations. Essential Functions/Duties/Responsibilities Customer Service • Answer incoming customer calls, intercoms, and electronic inquiries regarding airport parking services., • Assist guests experiencing issues with reservation QR codes, parking access credentials, payment systems, and parking equipment., • Verify customer eligibility and remotely grant access or exits in accordance with established procedures for reservations, lost tickets and other approved exceptions. Document as required., • Provide guests with parking information, rates, directions, shuttle information, and other airport-related assistance., • Resolve customer concerns professionally and escalate complex issues to supervisors as necessary., • Document customer interactions and maintain accurate records of service requests and complaints. Administrative Support • Monitor parking management software and customer service platforms., • Assist with processing refunds, duplicate receipt requests, customer adjustments, and account inquiries in accordance with company policies., • Maintain records, reports, logs, and customer correspondence., • Manage the Monthly Parking Program with the utmost integrity and professionalism., • Generate daily and monthly operational reports as assigned., • Support data entry and administrative projects related to parking operations and guest services., • Assist with badge access records, lost ticket documentation, and reservation audits. Operations Support • Monitor parking occupancy levels and communicate operational issues to supervisors and other stakeholders., • Coordinate with shuttle drivers, maintenance staff, and supervisors regarding customer service matters., • Assist in emergency communications and incident documentation., • Support the implementation of new customer service initiatives and technologies., • Executes additional responsibilities as assigned to support operational continuity and organizational objectives.Requirements:, • Strong customer service orientation and conflict resolution skills., • Ability to remain calm and professional during stressful situations., • Excellent verbal and written communication skills, • Excellent organizational and multitasking abilities., • Strong attention to detail and accuracy., • Ability to exercise sound judgment when granting access or resolving customer issues., • Ability to work well under stress, • Ability to de-escalate difficult situations with customers, • Comfortable working with technology platforms, reservation systems, cameras, and access control systems., • Ability to communicate effectively with guests, airport tenants, airlines, and the public., • Good knowledge of Microsoft 365, including SharePoint, Teams, Excel, Word, and Outlook, • Ability to learn parking management, reservation, and access control software systems., • Ability to use communication devices, such as radios, tablets, or dispatch systems., • Ability to fluently read, write, speak, and understand English. Physical Requirements Ability to perform the physical requirements of the position with or without a reasonable accommodation, which may include but are not limited to: • Sedentary work that involves sitting/standing at a desk, • Repeating motions that may include eyesight, wrists, hands, and/or fingers., • Lifting up to 25 lbs. on occasion, • Being able to listen and speak clearly on a telephone or through a headset Education and Experience • High school diploma or GED required., • Associate's degree in Business Administration, Hospitality, Communications, or related field, preferred., • Two (2) years of customer service, hospitality, administrative support, parking operations, transportation, or airport-related experience preferred., • Proficiency with Microsoft Office applications. Special Requirements • Must successfully complete E- Verify I-9 process. We will provide E-Verify and the federal government with your I-9 information to confirm that you are authorized to work in the U.S. *Any offer of employment would be contingent on passing a security clearance background check. Part Time Employee Benefits • Dental/Vision if you work more than 30 hours per week on average, • NYS Deferred Compensation Plan 457(b) with employer 401(a) match, • Paid Family Leave, • Employee Assistance Program, • Flexible Spending Accounts, • Supplemental Insurance, • Night Shift Differential. $1.00/night shift differential for the 11:00 p.m. - 7:30 a.m. shift. EEO Statement Altitude Access Solutions, Inc. is committed to equal employment opportunity and leveraging the talent of a diverse workforce to serve the traveling public at Syracuse Hancock International Airport. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran, or any other basis protected by Federal, State or Local law. We encourage individuals from all backgrounds to apply.

UPS Part-Time Package Delivery Drivers.They’re the ones who drive our familiar brown trucks, bringing packages great and small to our customers.They’re a friendly, physically active crew who enjoy fast-paced work, being outdoors, and being behind the wheel!.The ability to lift up to 70 lbs.Valid

Click “Sign Up Now” and complete the sign up process.

Provide some basic information to start the application process. Complete our online application process.

Click “Sign Up Now” and complete the sign up process.

UPS Part-Time Package Delivery Drivers.They’re the ones who drive our familiar brown trucks, bringing packages great and small to our customers.They’re a friendly, physically active crew who enjoy fast-paced work, being outdoors, and being behind the wheel!.The ability to lift up to 70 lbs.Valid

Click “Sign Up Now” and complete the sign up process.

Click “Sign Up Now” and complete the sign up process.

Provide some basic information to start the application process. Complete our online application process.

Click “Sign Up Now” and complete the sign up process.