Sound engineer jobs in Atlanta, GeorgiaCreate job alerts

Job Description Job Description SummaryThe Reliability Engineer will work closely with Sibelco plant maintenance, production and leadership teams to develop and utilize effective tools and systems for measuring reliability of our production process. This position is responsible for providing engineering support for maintenance planning/supervision, operation and maintenance of Sibelco North America Processing plants, developing and implementing programmatic methods to ensure safe operation and high equipment reliability/availability, cost effective maintenance, and continuous improvement culture. This role includes applying lean maintenance strategies and predictive technologies while optimizing a system’s operational performance, life cycle cost, and payback. This role will act as primary liaison for capital projects with the Capital implementation team for all cluster plants. Responsibilities Safety • Achieve safety and health objectives., • Leads and is responsible for the execution of reliability excellence/maintenance program. Writes and maintains reliability maintenance strategy documents., • Work with Maintenance Planners/Supervisors to implement Lean manufacturing tools to empower employees and facilitate growth to improve financial performance., • Responsible for ranking the criticality of the assets under their care, typically using Reliability Centered Maintenance approaches, and for defining the proactive maintenance approaches that are cost-beneficial to the business., • Identifies and implements predictive maintenance technologies. Manages predictive maintenance equipment., • Performs/supports operational event and equipment failure investigations to ensure that the root cause/causal factors have been identified, corrective actions prescribed, and follow-up monitoring conducted as applicable, to determine effectiveness., • Conducts program and system/equipment audits on a periodic and as needed basis. Audits will generally be focused on safety, risk analysis, regulatory compliance, maintenance effectiveness, cost savings, and energy conservation., • Participates in the planning, design review, value management and construction document development of new facilities and renovations. Supports utility distribution, master planning, and business continuity planning., • Develop and maintain new “Key Performance Indicators" of equipment reliability., • Lead in maintenance improvement tools (PM Optimization, RCM, RCA, RCFA, FMEA, etc.) and knowledgeable in predictive maintenance tools, • Maintain a high level of technical competency in advanced maintenance technology., • Maintain equipment repair history and evaluate repair costs & trends., • Analyze equipment failure data patterns and interpret ERP PM maintenance data to generate priorities and action lists for improving reliability of site., • Track the performance of reliability improvements to determine their effectiveness and make additional modifications if required., • By working closely with the local Maintenance Teams, use intervals for potential failures to appropriately prioritize, plan, and schedule to minimize downtime., • Develop solutions to repetitive, chronic, or costly failures and other maintenance problems, and apply value analysis to repair/replace, repair/redesign, and make/buy decisions., • Assist in troubleshooting techniques for major/repetitive equipment., • Advise the Maintenance Supervisors/Managers of any problems or potential problems which affect the ability of the operation to produce in a safe and efficient manner., • Monitor and report on all relevant maintenance activity KPI’s including wrench time analysis., • Perform other duties as assigned. Competencies (Reference : Sibelco (Leadership) Competency Model) Decision Making • Accurately determines the complexity of tasks and projects and required resources, • Breaks down projects or assignments into different steps (group of activities), • Sets priorities and time parameters to accomplish tasks and projects, • Actively uses the practices, processes, and procedures within the operating model to get things done, • Organizes people and activities for simple and complex processes in an effective way, • Consistently fosters collaboration across the organization, • Builds strong inclusive relationships across Business/Functions and levels, • Enables and empowers people to give their best, • Makes the link between what drives people and the organizational goals, • Stays composed and navigates through change effectively, • Leads others to operate effectively in absence of clear structure and processes, • Comfortable in making decisions and taking actions, even with incomplete information, • Handles risk and uncertainty comfortably (Technical) Capabilities Industry knowledge • Practical knowledge of engineering principles applied to design, operation and maintenance of building structures and mechanical and electrical equipment for buildings., • Experience w/ predictive maintenance technologies including, but not limited to, vibration analysis, oil analysis, infrared Thermography, ultra sound and motor current analysis., • Open minded, • Team player, • Pro-active, • Able to work independently, • Diplomatic, • Self-motivated Educational Background and prior professional experience Language requirements • Minimum 10-15 years engineering/industrial maintenance experience, including experience with mechanical design/testing, international quality standards., • Minimum 5 years utility systems/management and/or facilities/plant management and maintenance. Experience in the Glass industry is preferred., • Certified Plant Engineer or Certified Maintenance Reliability Professional is preferred., • English – proficient verbal & writing

Position: Mechanical/Process Engineer – Power Industry Location: Minneapolis or Atlanta (hybrid) This position is related to power generation and energy infrastructure projects, including gas-fired power plants, combined cycle facilities, renewable generation support systems, battery energy storage systems (BESS), and associated industrial facilities. The role supports U.S. projects and requires solid experience in mechanical systems design for power and energy facilities. Primary Responsibilities The Mechanical Engineer – Power Generation Facilities will be responsible for the engineering and design of mechanical systems and process equipment associated with power generation plants across all project phases, from conceptual studies through IFC packages and construction support. The position has a strong focus on equipment selection, process documentation, and coordination with multidisciplinary teams. Key responsibilities include: • Develop and review mechanical designs for power generation facilities, including gas turbine, reciprocating engines, combined cycle, renewables and balance-of-plant systems., • Prepare and review Process Flow Diagrams (PFDs) and Piping & Instrumentation Diagrams (P&IDs) for power plant systems such as fuel gas, cooling water, steam, condensate, compressed air, lube oil, and auxiliary systems., • Perform and validate heat and mass balance calculations for power generation cycles and auxiliary systems., • Equipment sizing, technical evaluation, and selection of major and auxiliary mechanical equipment, including heat exchangers, pumps, compressors, cooling systems, vessels, tanks, and packaged equipment., • Develop detailed equipment and system specifications, datasheets, and requisition packages for vendor inquiry and procurement support., • Review vendor documentation, technical bids, and drawings to ensure compliance with project requirements and applicable codes and standards., • Coordinate mechanical process design with civil, structural, electrical, I&C, piping, and construction disciplines., • Support plant layout development, equipment arrangement, and interface definition with piping and structural design., • Participate in HAZOP, design reviews, constructability reviews, and technical risk assessments., • Provide engineering support during construction, commissioning, and startup phases, including responding to RFIs and reviewing field changes. This position is expected to operate with limited supervision, independently applying standard engineering techniques and exercising sound engineering judgment. Assistance will be provided for complex or nonstandard challenges. Some travel may be required. Minimum Academic & Professional Requirements • Bachelor of Science degree in Mechanical Engineering or related engineering discipline., • Professional Engineer (PE) registration is preferred., • 7 to 12 years of experience in mechanical and process design for power generation or heavy industrial facilities., • Preferred experience sectors include power generation (simple cycle and combined cycle), renewable energy facilities, energy storage, petrochemical, industrial plants, or large infrastructure projects. Key Skills The successful candidate will be a flexible and dynamic team player capable of integrating into an international engineering environment. Strong communication, analytical, and documentation skills are essential. Key skills include: • Strong knowledge of mechanical process design principles for power and energy facilities., • Demonstrated experience with equipment selection, heat & mass balances, and P&IDs., • Familiarity with applicable codes and standards (ASME, API, ASTM, TEMA, NFPA, etc.)., • Experience preparing technical specifications, datasheets, and procurement documentation., • Proficiency with industry-standard engineering tools, spreadsheets, and calculation methodologies., • Experience with AutoCAD and/or Revit is a plus., • Ability to work effectively in multidisciplinary and multicultural teams., • Strong organizational skills and attention to technical detail., • Spanish proficiency is a plus. Our Employees Enjoy • Competitive compensation, including incentive compensation based on company performance., • Job enrichment and career enhancement opportunities., • Comprehensive benefits package including medical, dental, vision, health savings accounts, disability insurance, life insurance, flexible spending accounts, 401(k), paid time off, and holidays., • Excellent working conditions in a collaborative and professional environment., • Professional development opportunities, including job-related training and tuition reimbursement programs. IDOM is an employee-owned international engineering, architectural, and consulting firm with more than 5,500 professionals in 45 offices across the Americas, Europe, North Africa, and the Middle East. In the U.S., IDOM provides professional engineering and consulting services to the Power, Petrochemical, Renewable Energy, Research & Test Facilities, Manufacturing, Pharmaceutical, and Food & Beverage sectors. Founded in 1957, IDOM offers a strong backlog of technically challenging projects in the U.S. and worldwide. Learn more at . IDOM is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Senior Software Engineer Company: KeyPleaz Location: Remote (U.S. preferred) Reports to: CTO About KeyPleaz KeyPleaz is a property access and coordination platform that helps manage entry, scheduling, and logistics across real-world locations. We work with property managers, service providers, and partners to replace manual, fragmented processes with secure, reliable software. Think about it as Uber for Real Estate Agents. Our platform operates where digital systems meet physical access, which means quality, reliability, and thoughtful engineering matter. Role Overview We are seeking a Senior Software Engineer to help build, scale, and maintain the KeyPleaz platform. KeyPleaz began in 2019 and is in production today. This is a hands-on role for an experienced engineer who can own features end-to-end, contribute across the stack, and help guide technical decisions as the platform grows. We hire for ownership and execution. Technical competence is table stakes. What differentiates top performers on our team is personal ownership, disciplined execution, and proactive problem solving. We look for engineers who treat the product like their own business—who communicate clearly, move fast with accountability, and finish what they start. You will work closely with product, operations, and leadership to deliver stable, scalable solutions used daily by customers and partners. Responsibilities ● Design, build, and maintain core platform features ● Develop and support backend services using .NET ● Contribute to web and mobile applications built with React ● Build and consume APIs and integrate third-party services ● Work with relational databases and ensure data integrity ● Improve reliability, performance, and security across systems ● Participate in code reviews, technical planning, and architecture discussions ● Mentor and support other engineers as the team grows ● Evaluate and apply AI tools (i.e. agentics, vibe coding - code generation, testing, monitoring, analytics) to improve development velocity, system reliability, and engineering effectiveness Qualifications ● 7+ years of professional software engineering experience ● Strong experience with .NET / ASP.NET backend development ● Working knowledge of React or modern JavaScript frameworks ● Experience designing and consuming APIs ● Solid understanding of relational databases ● Experience working in cloud environments ● Familiarity with AI-enabled development tools and emerging AI services, with the ability to assess practical use cases and integrate them responsibly into production workflows ● High ownership, sound judgment, and clear communication Nice to Have ● Experience with mobile applications ● Payments or third-party integrations ● Startup or small-team experience ● Comfort working in evolving, ambiguous environments Why KeyPleaz ● Ownership of meaningful, real-world systems ● Small team with direct access to leadership ● Focus on building reliable software, not just shipping features ● Opportunity to grow into senior technical leadership roles

Job Description Job Title: Roadway Worker In Charge (RWIC) Location: Atlanta, GA Job Type: Full-Time FLSA Status: Hourly; Non-Exempt Reports To: District Manager Travel: Yes, travel is expected for this position (50% - 85% on average). Supervisory Responsibility: No Compensation: Negotiable, based on skills and experience. Company Profile: National Railroad Safety Services, Inc. (NRSS) is a certified DBE/WBE firm primarily focused on providing safety services to the railroad industry. NRSS is the most trusted name in the railroad industry for providing qualified field safety staff and safety training. To best serve the railroad industry, NRSS provides all of these services in the continental United States, Canada, and Mexico. NRSS has the proven ability and the proven safety record to handle any project. Find the safety you have been missing today! Job Description: National Railroad Safety Services, Inc. (NRSS) is seeking a Roadway Worker In Charge (RWIC) to support railroad flagging services for Class 1 Railroads, Regional Short Lines, Transit Systems, State DOT's, as well as Railroad Suppliers, Contractors, and Consultants alike. Required Education: High School Diploma or Equivalent. Required Experience: Minimum 2 years of experience with a Class 1 Railroad, Regional Short Line, Transit System, State DOT Rail Division, Railroad Supplier, Railroad Contractor, and/or Railroad Consultant; preferably within the Maintenance Of Way (MOW) Department. Key Success Factors: • Accountability: Accept full responsibility for self and contribution as a team member., • Adaptability & Flexibility: Ability to consider a variety of issues that exist in the work place and change from one task to another as necessary., • Attention to Detail: Ability to work in a conscientious, consistent, thorough manner, and attend to details while pursuing quality when accomplishing tasks., • Analytical Thinking: Ability to analyze and synthesize information to understand issues, identify options, and support sound decision making., • Communication: Ability to clearly convey information and ideas through a variety of media to employees/clients in a clear and succinct manner., • Customer Service Focus: Ability to provide service excellence to internal and/or external clients., • Decision Making: Ability to identify/understand issues, problems, opportunities and take appropriate action based on available facts, constraints, and probable consequences., • Initiative: Ability to identify what needs to be done and take action before being asked., • Innovativeness: Ability to devise new plans for quality excellence., • Knowledge: Ability to navigate various rulebooks and/or regulations and demonstrate mastery., • Organization: Ability to maintain materials and/or records in a clean and ordered manner., • Planning: Ability to plan and prioritize work load to manage time effectively and accomplish assigned tasks., • Stress Tolerance: Ability to maintain stable performance under pressure or opposition (such as time pressure or job ambiguity)., • Teamwork: Promote cooperation and commitment within a team environment to achieve goals and deliverables., • Proficient computer skills in basic email, phone, and text message applications., • Proficient computer skills in Android OS; on tablet & smart phone., • Proficient computer skills in Citrix Applications., • Strong oral and written communication skills., • High level of accuracy and attention to detail; well organized., • Strong technical knowledge in Railroad Engineering, Railroad Design, Railroad Construction, and Safety., • Demonstrated ability to develop and maintain strong client relationships., • Ability to travel for extended periods of time; sometimes month(s) at a time., • Provide jobsite coordination., • Provide clear and concise communication with Dispatchers, Train Crews, other Railroad Personnel, and/or Contractor personnel., • Provide clear, concise, and thorough job briefings with all personnel on each job site., • Enforce Contractor training requirements., • Enforce all Railroad, State, and Federal Policies., • Submit daily field reports detailing Contractor and/or Railroad activities., • Identify rule violations and resolve in accordance with Railroad, State, and Federal Policies. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Must be able to hear, speak, read, and write clearly in English., • Must be able to drive long distances and/or travel by other modes as necessary., • Must be able to stand for long periods of time and/or walk on level/uneven ground., • Must be able to see up close, distances, colors and have use of peripheral vision and depth perception., • Must be able to tolerate extreme heat/cold temperatures., • Must be able to tolerate dusty/noisy conditions., • Medical, Dental, Vision, Life Insurance, • Short Term, Long Term Disability Insurance, • Paid Vacation and Holidays Safety Commitment: All employees of all levels are to remain committed to safety at all times while employed at National Railroad Safety Services, Inc. (NRSS). As such, no job is so important and no service is so urgent that we may not take time to perform all work safely. Simply put, safety is our way of life. By placing safety first, we not only ensure the wellbeing of our employees, customers, and communities, but we hold true our commitment to being the leader in safety throughout the Railroad Industry. Closing Statement: National Railroad Safety Services, Inc. (NRSS) is an Equal Opportunity/Affirmative Action Employer. Any candidate selected for this position must be able to successfully pass pre-employment/recurrent background checks, drug/alcohol testing, and classroom training. Job Posted by ApplicantPro

Proven experience working as an AV Production Engineer or similar role. From first technical conversation with the client, through designing the AV plan, coordinating gear and local crews, to running the show on‑site, you are responsible for making the event look and sound exceptional and feel eas

Job Description Specific duties include plan, design and engineer building plumbing systems and fire protection systems for a wide variety of markets, production of construction documents utilizing Revit software, and maintaining client relationships in the plumbing and fire protection disciplines for facilities projects. Additional duties include complete plumbing calculations, energy analysis and sustainable design (pertaining to plumbing systems), existing system condition assessments, and construction administration activities. This position reports to the Director of Engineering. General Duties and Responsibilities • Exceptional interpersonal skills are essential., • Demonstrated ability to clearly communicate project objectives, problems and solutions with clients, field personnel and internal staff., • Ability to facilitate close work with clients, field personnel and internal staff to achieve deadlines and quality work., • Demonstrated ability to work well in a team/collaborative setting, make sound decisions and drive action cross-functionally., • Demonstrated strong written, verbal presentation and communication skills., • Knowledge development of building codes, regulations and requirements, thorough knowledge of building materials and construction methods, knowledge of procedures, and sequencing of construction documents., • Ability to organize and prioritize personal workload and make necessary adjustments to meet strict deadlines; must be results-oriented and milestone-driven., • Licensed/registered mechanical engineer (PE)., • Plumbing and fire protection design/engineering experience of 5 years, • Must be proficient in Microsoft Office (Word, Excel, Outlook); Revit experience is preferred., • Ability to move around construction sites in various stages of development from excavation to completion and beyond, without the assistance of others, • Work is performed in an office setting and in the field; job site monitoring may be performed in various weather conditions, • Activities may be necessary outside of the normal office hours depending on workload, schedules and client geographical location, • Occasional travel will be required, • The salary range for this position is between $90,000 - $102,000 based on experience

Job Description General Duties and Responsibilities Specific Structural EIT duties include structural planning, designing, engineering and producing construction documentation utilizing Revit and various structural engineering methods and software. Additional duties include assistance with specification writing and construction administration services. This position reports administratively to both the Studio Director and the Director of Engineering, with day-to-day guidance and task assignments by the Structural Team Leader. Minimum Requirements • Bachelor’s degree in Civil Engineering from an accredited institution with an emphasis or specific coursework in structural engineering for buildings, • Master’s degree in Civil Engineering is not mandatory, but recommended, • Passed the Fundamentals of Engineering (FE) exam, and hold an EIT certification, • Exceptional interpersonal skills are essential along with strong listening, verbal and written skills, • Demonstrated ability to clearly communicate project objectives, problems, solutions and scope changes with clients, field personnel and internal staff, • Ability to facilitate close work with clients, support personnel and internal staff to achieve deadlines and quality work, • Demonstrated ability to work well in a team/collaborative setting, make sound decisions and drive action, • Demonstrated exceptional planning, analytical and problem-solving skills; ability to apply logical steps to problem solving, • Ability to function effectively in a demanding environment and manage multiple projects simultaneously, • Must be proficient in Microsoft Office (Word, Excel, Teams, Outlook), • Familiarity using Revit to model structural elements and produce structural drawings, • Having structural analysis software is a plus, but not required (examples: RISA 3D, RAM Elements, Enercalc, ETABS, SAP) Must be self-motivated • Knowledge of building codes, regulations and requirements along with thorough knowledge of building materials and construction methods, knowledge of procedures and sequencing of construction documents will eventually be required, • Ability to organize and prioritize personal workload and make necessary adjustments to meet strict deadlines; must be results oriented and milestone driven, • Ability to work with modest supervision and guidance, • Ability to make independent decisions within a general framework, • Have a natural desire for continuous professional improvement/development Professional Development & Growth • Exposure to a wide variety of structural systems and project types, • Mentorship from licensed structural engineers, • Progressive responsibility in design, analysis, and construction administration, • Support toward obtaining Professional Engineer licensure Physical Requirements and Environmental Adaptability • Ability to navigate construction sites in various stages of development, including uneven terrain and temporary access conditions, • Work is performed in an office setting and in the field; job site monitoring may be performed in various weather conditions, • Occasional travel may be required, • Activities may be necessary outside of the normal office hours depending on workload, schedules and client geographical location The base salary for this role is between $65,000 - $97,000 based on experience.

Job DescriptionAHEAD builds platforms for digital business. By weaving together advances in cloud infrastructure, automation and analytics, and software delivery, we help enterprises deliver on the promise of digital transformation. At AHEAD, we prioritize creating a culture of belonging, where all perspectives and voices are represented, valued, respected, and heard. We create spaces to empower everyone to speak up, make change, and drive the culture at AHEAD. We are an equal opportunity employer, and do not discriminate based on an individual's race, national origin, color, gender, gender identity, gender expression, sexual orientation, religion, age, disability, marital status, or any other protected characteristic under applicable law, whether actual or perceived. We embrace all candidates that will contribute to the diversification and enrichment of ideas and perspectives at AHEAD. LAUNCH – Join AHEAD's Associate Development Program Our Mission: to attract and develop a diverse community of THE top IT consulting talent in the country and build AHEAD’s next generation of leaders. LAUNCH serves as the foundation to develop our talent into high potential leaders at AHEAD. By exposing you to a variety of career paths and building your acumen across different practices in the business, we’re accelerating your growth and career trajectory at AHEAD. Our development program is built on a foundation of technical training, completion of certifications, and shadowing, all supported by an ecosystem of AHEADians that will be part of your Launch journey, every step of the way! You’ll grow and develop key skills that will support your development as a technical and consulting expert. If you’re ready to begin an exciting career in IT Consulting, LAUNCH is where you should be! Associate AI Engineer (Internally known as an Associate Technical Consultant) As an Associate Engineer in LAUNCH, you will start out in a 3-month training program within our Digital Solutions Group (DSG) practice focused on AI solutions. Upon completion of LAUNCH, you will have the opportunity to work on client projects based on skillset, personal interest, and business needs. Who we’re looking for: Think Big, Learn, and Be Curious • Innovative Thinkers, • Enthusiastic Collaborators, • Creative Problem Solvers, • Curious Self – Starters Responsibilities:, • Ability to communicate effectively across teams, and build positive relationships, • Demonstrate ability to work on teams, collaborate on projects, and contribute to the overall successful delivery of projects, • Demonstrate drive and proactiveness to get things done, be solutions–oriented, and enjoy solving complex problems, • Demonstrate resourcefulness, curiosity, creativity, courage, critical thinking, and a desire to use technology to search for new and innovative solutions to problems, • Exercise sound reasoning, ingenuity, and inclusive perspectives to analyze issues, solve problems and make recommendations, • Ability to execute, manage competing priorities, and deliver to deadlines Qualifications:, • Working knowledge of AI/ML fundamentals, including model types (transformers, embeddings, diffusion), data pipelines, and inference workflows, • Proficiency in Python, with exposure to frameworks such as FastAPI, Flask, • Familiarity with GenAI tooling (OpenAI, Anthropic, Gemini, etc.) and vector stores (Pinecone, FAISS, Weaviate), • Exposure to cloud platforms (AWS, Azure, GCP) and containerization (Docker, Kubernetes), • Understanding of MLOps concepts—version control (Git, DVC), CI/CD, observability, and deployment best practices, • Experience in at least one of the following:, • Academic or personal AI/ML projects, • Internship or co-op in software or data engineering, • Technical bootcamp or certificate program in AI, ML, or cloud computing, • Certifications such as AWS Cloud Practitioner, Microsoft MS-900, or GCP Cloud Engineer are a plus, • Excellent communication, teamwork, and problem-solving abilities, • U.S. work authorization required Experience in at least one of the below:, • Graduated with a degree in technical discipline by 6/8/26, • Prior intern, co-op, or research experience in IT, software, or relevant field is a plus

Job DescriptionThe Distribution Engineer V is a senior level engineering professional with deep, hands on experience in electric distribution systems. This role provides advanced technical leadership in the planning, design, and optimization of overhead and underground distribution infrastructure. The Distribution Engineer V serves as a subject matter expert in distribution engineering practices, supports complex system challenges, and partners closely with operations, construction, and planning teams to ensure safe, reliable, and efficient power delivery. What you will do: Distribution Engineering Expertise * Lead the engineering design and review of complex overhead and underground electric distribution systems, including feeders, laterals, services, and line extensions * Apply in depth knowledge of distribution construction practices, materials, and equipment (poles, conductors, transformers, switches, regulators, reclosers). * Perform advanced distribution system analyses, including load flow, voltage drop, fault current, protection coordination, and reliability studies. * Serve as a technical authority on distribution standards, ensuring compliance with NESC, NEC, IEEE, utility standards, and regulatory requirements. * Support system hardening, reliability improvement, and grid modernization initiatives. Field & Operations Collaboration * Work closely with distribution operations, construction, and maintenance teams to ensure designs are constructible, safe, and operationally sound. * Provide field engineering support, including site visits, constructability reviews, and resolution of complex field issues. * Support storm response, damage assessments, and system restoration efforts as needed. Project & Program Leadership * Serve as the engineering lead for large-scale or high-risk distribution projects. * Support capital planning, feeder improvement programs, and infrastructure replacement initiatives. * Provide engineering input for project scope, cost estimates, schedules, and risk assessments. * Coordinate with internal stakeholders and external partners, including contractors, municipalities, and regulatory agencies. Standards, Mentorship & Continuous Improvement * Develop, maintain, and improve distribution engineering standards, specifications, and design guidelines. * Mentor and provide technical guidance to junior and mid-level distribution engineers and designers. * Review and approve engineering deliverables for technical accuracy and adherence to standards. * Evaluate new technologies, materials, and methods to enhance distribution system performance and reliability. Who you are: • Bachelor’s degree from an ABET accredited institution in electrical engineering, • 13–15 years of progressive experience in electric distribution engineering., • Strong background in overhead and underground distribution design and construction practices., • Extensive working knowledge of NESC, NEC, IEEE standards, and utility construction standards., • Strong analytical, problem-solving, and technical decision-making skills., • Active Professional Engineer (PE) license in the applicable state(s), or the ability to obtain reciprocity within a defined timeframe., • Experience managing multiple people and projects with cross-functional teams and coordinating with clients and contractors. At Milhouse, we’re more than just a place to work — we’re a place to grow, thrive, and be celebrated. Here’s how we invest in you:, • Medical, Dental & Vision Coverage – Reach out to learn how your deductible could be covered 100% through Garner Health!, • Company Sponsored Life Insurance and Short-Term Disability – We’ve got your back when life takes unexpected turns., • Voluntary Coverages – Take control of your well-being with added coverage options., • Discounted Gym Membership – Stay active with wellness options that support your fitness goals., • Competitive Base Salary – Earn what you're worth in a performance-driven culture., • 401(k) Retirement Plan – Build your future with confidence., • Professional Development Incentives – Get rewarded for growing your skills — including bonuses for earning your P.E. License., • Milhouse University (Cross-Functional Training) – Expand your expertise with internal training built to elevate your career and receive PDH credits for applicable training towards professional engineering licenses, etc., • Employee Education & Development Program – Tuition assistance and learning opportunities to keep you moving forward., • Generous PTO + Paid Holidays – Rest, recharge, and enjoy the moments that matter most., • Paid Parental Leave – Bond with your new arrival — and yes, we’ll even cover a year of diapers!, • Extracurricular Sports Teams – Join our summer Volleyball and Softball squads for fun off the clock., • Employee Recognition Program – Be celebrated for the impact you make., • Employee Referral Bonus – Bring great people on board and get paid for it., • Transit Benefits Program – Save on your daily commute.

Job Description You are a P.E. with a B.S. in Electrical Engineering and 15+ years of hands-on experience. You have a comprehensive understanding of electric utilities (investor-owned, public power, and/or cooperatives). You are already an expert. Robson Forensic will train you to be a forensic expert. As an Electrical Engineer – Electric Utilities Expert, you will: • Investigate incidents involving design, construction, operation, and maintenance of electrical systems, equipment, and devices., • Analyze applicable federal, state, and local laws, rules, regulations, codes, standards of care, and safety aspects., • Write clear, scientifically sound reports., • Provide expert testimony. You will delve into the "why" behind incidents, critically assessing decision-making, operational practices, and the standard of care. This role offers you a chance to: • Use your cumulative training, experience, and critical thinking skills., • Collaborate with highly respected experts., • Continuously learn and grow., • Make a tangible difference. LOCATIONS: Miami Lakes/Palm Beach Gardens, FL, Atlanta, GA, Las Vegas, NV, Dublin, OH, Lancaster, PA, Irving, TX REQUIREMENTS: * Licensure: Active Professional Engineer (P.E.) license. * Education: Bachelor’s degree in Electrical Engineering. * Experience: 15+ years of electrical engineering experience, including experience with electric utilities (investor-owned, public power, and/or cooperatives), design, construction, operation, & maintenance of electrical systems, equipment, & devices; project management experience is a plus. * Knowledge: Thorough knowledge of federal/state/local laws, rules, regs, codes, standards of care, & safety aspects. * Skills: Excellent technical, analytical, writing, and communication skills. * Aptitude: Strong ability to translate complex technical findings into clear, objective evidence for non-technical audiences. * Work Style: Approximately 20% travel for inspections; the remainder is focused on analysis and report drafting, working independently and as part of a collaborative team. * Prior forensic experience is not required. We seek professionals eager to apply their deep industry knowledge to a challenging new domain. You must have a clean background screen, a driver’s license, and the ability to drive. ABOUT US: Robson Forensic is a national leader in expert witness consulting, providing technical expertise across many fields within engineering, architecture, science, and a broad range of specialty disciplines. Employees at Robson Forensic work alongside highly respected experts from both industry and academia. Our forensic experts are engaged in meaningful casework that is consequential to industry and society. Robson Forensic provides a unique working dynamic that blends collaboration and autonomy. We are an Equal Opportunity Employer. HOW TO APPLY: If this opportunity meets your expectations for a challenging and rewarding career, and you meet our minimum requirements, please apply and attach your resume and a cover letter outlining your professional background and experience.

Job DescriptionDescription: About the Role Automation Engineer (Level I–III) is a scalable engineering role designed to support a range of experience levels across our automation team. This position may report out of either Atlanta (Hartsfield-Jackson International Airport) or our Sanford, FL Headquarters, depending on project assignment and operational needs. This role is leveled I–III. Placement will be determined throughout the interview process based on résumé review, technical discussion, and skill assessment. Candidates may be aligned at Level I, II, or III depending on demonstrated experience, leadership capability, and technical depth. The posted salary range of $75,000 – $160,000 reflects the full range from Level I through Level III. At the senior end (Level III), this role serves as a technical leader on complex automation projects — owning system architecture, technical execution, and customer confidence from concept through commissioning. At Levels I and II, engineers support and progressively grow into greater ownership, complexity, and leadership responsibilities. CLX Engineering also offers annual performance-based bonus opportunities for Engineers at all levels (I–III), recognizing contributions to project success, technical excellence, and company growth. Typical Experience Range: • Level I: Early-career automation/controls experience, • Level II: 3–5+ years in automation, controls, or systems integration What You’ll Do (Level of responsibility scales based on placement.): • Support or lead technical aspects of automation projects from design through commissioning, • Design and develop control systems across electrical, mechanical, and IT disciplines, • Develop, review, and/or approve PLC/HMI code, drawings, and documentation, • Serve as a technical point of contact for customers and project managers (Level II–III), • Coordinate workloads, priorities, and schedules with engineering and field teams, • Participate in or lead design reviews and troubleshooting efforts, • Mentor junior engineers (Level III), • Experience with PLC and HMI platforms (depth expected to scale by level), • System integration knowledge including SCADA, industrial networks, and data flow, • Ability to operate in fast-paced, high-accountability environments, • Strong troubleshooting and analytical capability, • Professional communication skills; customer-facing confidence (Level II–III) Automation Engineers are critical to keeping airport operations running safely and efficiently. As responsibility scales, so does impact. By Level III, you are not just solving problems — you are preventing them, shaping standards, and developing the next generation of engineers. This role is built for engineers who want to grow — not just execute. Requirements: Required & Preferred Experience: • Willingness to travel with short notice up to 30%-50%, • Experience in live, high-pressure industrial environments, • Strong electrical schematic and controls understanding, • Ability to follow TSA testing requirements and execute test plans, • Proficiency in IEC PLC languages, • HMI experience (FactoryTalk View preferred; Ignition or Wonderware acceptable), • Working AutoCAD knowledge, • Strong written and verbal documentation skills, • Ability to supervise and coordinate with clients, vendors, and trades (Level II–III), • 4+ years PLC programming experience preferred for Level III (Allen-Bradley, Siemens, Beckhoff, etc.), • Ability to pass TSA SIDA and background checks

Job Description UPS Field Service Engineer III Atlanta, GA | Home-Based / Field Deployment | Full-Time | Senior Level Bloom Talent Solutions specializes in placing top-tier professionals with high-growth, industry-leading companies. We are proud to present this exclusive senior-level opportunity on behalf of a privately owned critical power services company with a strong presence across the Southeast. This role is built for the engineer who's been in the field long enough to have seen everything — and who can walk into a complex situation, size it up, and handle it independently. No hand-holding. No corporate layers. Just real, varied work at a company where your experience is valued from day one and your contribution is immediately visible. Key Responsibilities • Perform commissioning, preventive maintenance, emergency response, and field modifications on UPS systems, batteries, PDUs, STS, and related critical power equipment, • Lead commissioning-focused design reviews, prepare test procedures and reports, and oversee on-site testing, • Independently troubleshoot complex equipment failures across multiple OEM platforms including Eaton, Schneider/Vertiv, Mitsubishi, ABB, and Toshiba, • Develop and execute Methods of Procedures (MOPs) for both scheduled and emergency work, • Coordinate with technical support to resolve maintenance or operational issues beyond field resolution, • Complete Field Service Reports promptly and provide proactive, client-facing recommendations, • Serve as a technical escalation point and mentor for FSE I and FSE II engineers in the region Required • 8–15+ years of hands-on experience specifically in UPS and critical power systems — general field service does not transfer, • Multi-platform proficiency across Eaton, Schneider/APC/MGE, Vertiv/Liebert/Emerson, Mitsubishi, Toshiba, and ABB equipment, • Demonstrated ability to independently walk into complex troubleshooting situations and resolve them without guidance, • Proficient with hand tools and test equipment for maintenance, repair, and commissioning, • Strong verbal and written communication skills — this is a client-facing role, • Ability to work independently with sound judgment, resourcefulness, and initiative, • Willingness to work nights, weekends, and on-call rotations as required, • Physically capable of repeated bending and lifting up to 100 lbs, • OEM factory training or direct employment history with Eaton, Schneider, Vertiv, Mitsubishi, or ABB, • Experience at an independent or third-party UPS service provider (DC Group, Unified Power, Quality Uptime, or similar), • Technical degree from DeVry, Lincoln Tech, or equivalent program Compensation & Benefits • Compensation is market-competitive and follows the candidate — bring your number, • Comprehensive benefits package, • 401(k) with company match, • Vehicle allowance and gas card, • Home-based position with Atlanta, GA territory Interested candidates are encouraged to apply through Bloom Talent Solutions. Please submit your resume along with a brief summary of your UPS/critical power field experience. Qualified candidates will be contacted directly by our recruiting team. Send your resume to:

Job Description The Electrical Engineer is responsible for electrical planning, designing, engineering and construction document production and project estimates. Additional duties include energy analysis, lighting analysis, cost/benefit analysis, electrical systems design, existing system condition assessment, and emergency/standby generation design. This position reports to the Director of Engineering. The Fundamentals • Apply knowledge and experience with building codes, regulations and requirements, building materials, construction methods, and procedures to all projects. Ability to manage the proper sequencing of construction documents., • Manage multiple, simultaneous projects from beginning to end, such as Design Basis through specifications and submittals., • Able to work well in a team/collaborative setting, make sound decisions and drive action cross functionally., • Able to organize and prioritize personal workload in a dynamic, fast-paced environment to meet deadlines., • Comfortable making independent decisions with general guidelines., • Demonstrated exceptional planning, analytical and problem-solving skills; ability to apply logical steps to problem solving., • Able to work with modest supervision and guidance, • Possess a professional demeanor while interacting with clients, partners and team members., • Able to function effectively in a demanding environment and manage multiple projects simultaneously., • Demonstrated strong verbal and written communication skills; skilled with making presentations to clients., • Possess a professional demeanor while interacting with clients, partners and team members, • Experience in higher education, office and/or light manufacturing, • Bachelors degree in Electrical Engineering from an accredited institution, • Minimum five years of experience in facility design, • Experience in power distribution, lighting design, communication systems and data centers, lighting photometric calculations, existing building assessments/reports., • Professional license is preferred, • Must be proficient in Revit, Microsoft Office (Word, Excel, Access, Outlook), AutoCAD and specialized electrical engineering software (e.g. Easy Power), • Work is performed in an office setting and in the field; job site monitoring may be performed in various weather conditions., • Occasional travel may be required, • Able to move around construction sites in various stages of development from excavation to completion and beyond., • Work is performed in an office setting and in the field; job site monitoring may be performed in various weather conditions., • Occasional travel may be required, • Activities may be necessary outside of the normal office hours depending on workload, schedules and client geographical location. Annual base compensation for this position is $90,000 - $110,000 based on experience

Job Description You are a Civil Environmental or Chemical Engineer with 10+ years of experience with wastewater and industrial air pollution mitigation system design and implementation. You have experience with wastewater treatment facilities, landfills, and implementation of chemical safety protocols, including personal protective equipment assessment. You are already an expert. Robson Forensic will train you to be a forensic expert. Areas of potential litigation and claims include environmental decontamination and remediation, wastewater and landfill standards of care, environmental health and safety compliance, and environmental chemical release. As a Civil Environmental Engineering Forensic Expert, you will: • Investigate civil environmental engineering incidents., • Analyze procedures, applying your comprehensive knowledge of standards and practices., • Write clear, scientifically sound reports., • Use your cumulative training, experience, and critical thinking skills., • Collaborate with highly respected experts., • Continuously learn and grow., • Make a tangible difference. REQUIREMENTS • You have a B.S. in Civil Environmental or Chemical Engineering from an ABET accredited institution., • You have a P.E. license or an EIT/FE and can become a P.E. within 6 months., • You have 10+ years of Civil Environmental Engineering experience., • You can work both independently and as part of a collaborative team., • You have excellent technical, analytical, writing and communication skills., • You are willing to travel about 20% on average., • You have a valid driver’s license and the ability to drive., • Prior forensic experience is not required. We seek professionals eager to apply their deep industry knowledge to a challenging new domain. LOCATION: Miami Lakes/Palm Beach Gardens, FL, Atlanta, GA, Las Vegas, NV, Columbus/Dublin, OH, Lancaster, PA, Dallas/Ft. Worth/Irving, TX ABOUT US Robson Forensic is a national leader in expert witness consulting, providing technical expertise across many fields within engineering, architecture, science, and a broad range of specialty disciplines. Employees at Robson Forensic work alongside highly respected experts from both industry and academia. Our forensic experts are engaged in meaningful casework that is consequential to industry and society. Robson Forensic provides a unique working dynamic that blends collaboration and autonomy. Due to the seriousness of our work, we do stringent background checks on all our candidates. Candidates are required to pass a drug and background screening prior to their employment. We are an Equal Opportunity Employer. HOW TO APPLY If this opportunity meets your requirements for a challenging and rewarding career, and you meet our minimum requirements, please apply and attach your resume and a cover letter outlining your professional background and experience. We thank all applicants for their interest; however, only those under consideration will be contacted.

Job DescriptionDescription: About the Role Automation Engineer (Level I–III) is a scalable engineering role designed to support a range of experience levels across our automation team. This position may report out of either Atlanta (Hartsfield-Jackson International Airport) or our Sanford, FL Headquarters, depending on project assignment and operational needs. This role is leveled I–III. Placement will be determined throughout the interview process based on résumé review, technical discussion, and skill assessment. Candidates may be aligned at Level I, II, or III depending on demonstrated experience, leadership capability, and technical depth. The posted salary range of $75,000 – $160,000 reflects the full range from Level I through Level III. At the senior end (Level III), this role serves as a technical leader on complex automation projects — owning system architecture, technical execution, and customer confidence from concept through commissioning. At Levels I and II, engineers support and progressively grow into greater ownership, complexity, and leadership responsibilities. CLX Engineering also offers annual performance-based bonus opportunities for Engineers at all levels (I–III), recognizing contributions to project success, technical excellence, and company growth. Typical Experience Range: • Level I: Early-career automation/controls experience, • Level II: 3–5+ years in automation, controls, or systems integration What You’ll Do (Level of responsibility scales based on placement.): • Support or lead technical aspects of automation projects from design through commissioning, • Design and develop control systems across electrical, mechanical, and IT disciplines, • Develop, review, and/or approve PLC/HMI code, drawings, and documentation, • Serve as a technical point of contact for customers and project managers (Level II–III), • Coordinate workloads, priorities, and schedules with engineering and field teams, • Participate in or lead design reviews and troubleshooting efforts, • Mentor junior engineers (Level III), • Experience with PLC and HMI platforms (depth expected to scale by level), • System integration knowledge including SCADA, industrial networks, and data flow, • Ability to operate in fast-paced, high-accountability environments, • Strong troubleshooting and analytical capability, • Professional communication skills; customer-facing confidence (Level II–III), • Willingness to travel with short notice up to 30%-50%, • Experience in live, high-pressure industrial environments, • Strong electrical schematic and controls understanding, • Ability to follow TSA testing requirements and execute test plans, • Proficiency in IEC PLC languages, • HMI experience (FactoryTalk View preferred; Ignition or Wonderware acceptable), • Working AutoCAD knowledge, • Strong written and verbal documentation skills, • Ability to supervise and coordinate with clients, vendors, and trades (Level II–III), • 4+ years PLC programming experience preferred for Level III (Allen-Bradley, Siemens, Beckhoff, etc.), • Ability to pass TSA SIDA and background checks

Job Description Be Part Of A High-Performing Team: Join a well-established, multi-disciplinary architecture and engineering firm known for delivering impactful infrastructure and community-focused projects across the Southeast. This organization fosters a collaborative and purpose-driven culture, where teams work across diverse sectors including municipal, commercial, institutional, and residential developments. With a strong emphasis on innovation, professional growth, and community engagement, the team is committed to designing solutions that create lasting value and resilient communities. What's In Store For You: • Opportunity to lead and contribute to a wide range of high-impact civil engineering projects, • Collaborative, team-oriented environment with strong mentorship and leadership support, • Exposure to diverse project types across public and private sectors, • Flexible work environment supporting work-life balance, • Lead site civil engineering design efforts across multiple project types from concept through completion, • Oversee site layout, grading, drainage, stormwater systems, and infrastructure design, • Develop stormwater management reports, perform hydrologic and hydraulic analyses, and prepare SWPPP documentation, • Manage project workflows to ensure timely delivery and adherence to quality standards, • Coordinate with clients, contractors, regulatory agencies, and internal teams, • Support permitting processes, including approvals, documentation, and project closeout activities, • Conduct QA/QC reviews to ensure compliance with design standards and regulations, • Mentor and guide junior engineers while strengthening team capabilities, • Bachelor’s degree in Civil Engineering or related engineering discipline, • Minimum 10+ years of site civil engineering experience across diverse project types, • Professional Engineer (PE) license required, • Strong proficiency in Civil 3D and stormwater design tools, • Proven experience with stormwater systems, drainage design, and hydraulic analysis, • Ability to independently make sound engineering and design decisions, • Strong communication and stakeholder management skills, • Detail-oriented with the ability to manage multiple projects simultaneously, • Experience working with local, state, and regulatory permitting processes

Job DescriptionSummary: This role is responsible for excellent front of house, monitor, live broadcast digital sound stream mixing & digital message recording at worship experiences and events, including other duties as assigned in Atlanta.

Job Description You are a P.E. licensed Civil Engineer with 15+ years of hands-on experience in land development and/or site/civil/heavy construction project management. You have broad experience with safety requirements and issues on construction sites. You are already an expert. Robson Forensic will train you to be a forensic expert. As a Civil Engineer – Land Development Forensic Expert, you will: • Investigate civil engineering – land development incidents., • Analyze procedures, applying your comprehensive knowledge of standards and practices., • Write clear, scientifically sound reports., • Provide expert testimony. You will delve into the "why" behind incidents, critically assessing decision-making, operational procedures, and the standard of care. This role offers you a chance to: • Use your cumulative clinical training, experience, and critical thinking skills., • Collaborate with highly respected experts., • Continuously learn and grow., • Make a tangible difference. Location: Miami Lakes/Palm Beach Gardens, FL, Atlanta, GA, Columbus/Dublin, OH, Lancaster, PA (hybrid) Requirements: • Licensure: Active P.E. license., • Education: B.S. in Civil Engineering from an ABET-accredited institution., • Experience: 15+ years of hands-on experience in land development and/or extensive site/civil/heavy construction project management; safety requirements and issues on construction sites; design experience and a thorough working knowledge of contracts, safety, construction means & methods, scheduling, estimating, subcontractor management, & quality control., • Additional Experience a Plus: Experience in community development or residential land development is preferred; experience in commercial land development, commercial construction, single-family home construction, commercial recreational construction, and/or heavy construction is a plus., • Skills: Excellent technical and analytical skills; strong written and verbal communication skills., • Ability: You can safely climb/navigate ladders, roofs, scaffolding, etc. for inspection activities., • Work Style: Approximately 20% travel for inspections; the remainder is focused on analysis and report drafting, working independently and as part of a collaborative team., • Prior forensic experience is not required. We seek professionals eager to apply their deep industry knowledge to a challenging new domain. You must have a clean background screen, a driver’s license, and the ability to drive. ABOUT US: Robson Forensic is a national leader in expert witness consulting, providing technical expertise across many fields within engineering, architecture, science, and a broad range of specialty disciplines. Employees at Robson Forensic work alongside highly respected experts from both industry and academia. Our forensic experts are engaged in meaningful casework that is consequential to industry and society. Robson Forensic provides a unique working dynamic that blends collaboration and autonomy. We are an Equal Opportunity Employer. HOW TO APPLY: If this opportunity meets your expectations for a challenging and rewarding career, and you meet our minimum requirements, please apply and attach your resume and a cover letter outlining your professional background and experience.

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit . Your Impact: Pearce Services/ Unified Power is seeking a Critical Power Field Technician (UPS Field Engineer) for Atlanta, GA, and surrounding areas, with a commitment to excellence and a strong desire to succeed and learn new skills. As a Critical Power Technician, you will directly support our customers in the onsite preventive, corrective, and restorative maintenance of their critical power systems (i.e., UPS, DC systems, inverters, PDUs, STS, and standalone reserve battery technologies). As a UPS Field Service Engineer for Unified Power, you will possess and utilize the 'hit-the-ground-running' and 'think-outside-the-box' mentalities that drive swift and superb solutions to address our customers' needs. Core Responsibilities: • Install electrical equipment such as small rack-mounted UPS equipment, various-sized batteries, and UPS/Battery monitoring equipment., • Maintain Battery Cabinets and racks, Maintenance Bypass, Battery Monitoring Equipment, DC Systems, and other electrical equipment., • Periodic and lifecycle-driven performance of remedial services, including failure analysis and troubleshooting, component replacements and repairs, and battery string replacements and installations., • Customer relationship building – Provide excellent customer service and upsell products., • Field troubleshooting calls from customers to a satisfactory resolution., • Quickly respond to critical situations., • Teach and mentor crew members on proper techniques for site work, troubleshooting, repair, and analyzing site data., • Isolate basic hardware, software, and interface malfunctions utilizing various test equipment on multiple products and technologies. ATTN: Only applicants with the following experience will be considered. Please ensure your resume clearly details your UPS work experience before applying. • Prior military training in electronics or avionics (A School, AIT, etc.) preferred., • Minimum of three (3) years serving in a third-party critical power field service or technical support role with a demonstrated progression in technical proficiency and capability -OR-, • Minimum of five (5) years serving in an OEM service environment in the critical power space., • Good understanding of AC/DC electrical principles., • Knowledge of test equipment operation, such as multi-meters, and battery test equipment., • Read and interpret electronics schematics with the ability to troubleshoot failures/faults to the component level., • Understand and have experience enforcing compliance with FCC/FAA/EPA/OSHA regulations and standards., • Outstanding work ethic, punctuality, trustworthiness, and reliability – you will set the pace as a senior UPS/ Critical Power Engineer., • At Pearce, safety is our number one concern. Candidates must be able to comply with OSHA and applicable DOT Standards., • Must have a valid driver's license with an acceptable driving record (if driving a Company Vehicle) and pass a pre-employment drug screen., • Ability to lift and/or move up to 100 pounds for short durations., • Ability to kneel or crouch periodically., • Ability to stand for extended periods of time., • Ability to travel for multiple days with Per Diem as projects require., • Coordinate multiple tasks simultaneously while maintaining 100% safety awareness. At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$28—$40 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at !

Job Description McKenney’s, Inc. is seeking a licensed Structural Engineer to support our mechanical and plumbing operations. This role is embedded directly with project teams responsible for getting work built—requiring a strong appreciation for schedules, constructability, prioritization, and customer service. The successful candidate will apply sound engineering judgment to deliver safe, code‑compliant, and efficient structural solutions that enable successful installation of mechanical and plumbing systems. JOB SUMMARY The Structural Engineer (PE) will provide structural engineering services in support of mechanical and plumbing construction projects. This includes the design and review of pump skids, piping skids, equipment supports, pipe supports, seismic restraints, and wind restraint systems for mechanical equipment. The role works closely with internal operations teams, virtual construction, fabrication, and field personnel to ensure designs are practical, constructible, timely, and aligned with project schedules and customer commitments. DUTIES & ESSENTIAL JOB FUNCTIONS • Design and seal structural calculations and details for pump skids, piping skids, and packaged mechanical systems., • Engineer pipe support systems including gravity, lateral, seismic, and thermal considerations., • Design seismic restraint systems for ductwork, piping, plumbing, and mechanical equipment in accordance with applicable codes and standards., • Perform wind load analysis and design wind restraint systems for rooftop and exterior mechanical equipment., • Review delegated design submittals and shop drawings related to structural supports and restraints., • Ensure compliance with applicable building codes, seismic requirements, wind criteria, and referenced standards (IBC, ASCE 7, SMACNA, MSS, etc.)., • Provide timely engineering support to operations teams to maintain construction schedules and address field conditions., • Participate in coordination meetings with internal teams, general contractors, and other trades as required., • Perform site visits to validate existing conditions, review installations, and support issue resolution., • Clearly communicate engineering intent to non‑structural audiences including project managers, superintendents, fabricators, and installers., • Bachelor’s degree in Structural Engineering, Civil Engineering, or similar., • Registered Professional Engineer., • Minimum of 7–10 years of relevant structural engineering experience., • Experience supporting construction‑phase engineering within a design‑build or contractor‑led environment., • Working knowledge of mechanical and plumbing systems and how they are fabricated and installed., • Familiarity with seismic and wind restraint design for MEP systems., • Ability to work effectively in a fast‑paced environment with competing priorities., • Strong understanding of structural engineering principles as applied to MEP systems., • Excellent written and verbal communication skills., • Ability to translate engineering requirements into clear, practical direction for construction teams., • High level of organization with the ability to manage multiple priorities simultaneously., • Strong sense of urgency and accountability to schedules and commitments., • Customer‑focused mindset with appreciation for internal operations needs., • Professional demeanor and commitment to McKenney’s values and standards., • Self‑starter capable of working independently and collaboratively. McKenney’s is an Equal Opportunity Employer committed to workforce diversity. Qualified candidates will receive consideration without regard to age, color, religion, sexual orientation, disability, national origin, or gender identity. McKenney’s is a smoke-free and drug-free workplace. Powered by JazzHR eZwo79fNmL

Job Description Nexus Circular is the commercial leader in advanced recycling technology that converts landfill-bound plastics into circular feedstocks for the production of sustainable virgin plastics for packaging and other applications. Nexus Circular’s end-to-end solution is economically validated as demonstrated by consistent bulk sales of high quality, ISCC Plus circular feedstocks for virgin plastic production. Aligned with global partners who seek proven scalable solutions to meet ambitious plastic circularity goals, Nexus Circular is rapidly expanding its innovation footprint worldwide, moving decisively to address the complex challenges of plastics accumulation in the environment. Nexus has built an outstanding culture. We are looking for people to contribute to a fast-paced, environmentally committed business that is focused on growth and sustainability. We are very collaborative, transparent, data driven, value diverse perspectives and are looking for constructive initiatives and new ideas. We are looking for self-starters and independent thinkers who work collaboratively in teams. Given the growth stage of Nexus, we are also looking for people who are comfortable moving between strategic thinking and executing those ideas to take Nexus to the next level. Role Purpose The Project Engineering Manager (PEM) is the single‑point owners for all engineering and technical matters on large capital projects (typically >$100MM). This role acts as the client‑side Project Engineering Manager, providing leadership, technical assurance, and integration across all engineering disciplines, EPC contractors, licensors, vendors, and internal stakeholders. Beyond delivering individual projects, this role is expected to build, standardize, and institutionalize engineering systems, processes, procedures, and tools that can be consistently applied across Nexus projects—so success is repeatable, scalable, and not dependent on any single individual. Education & Credentials • Bachelor’s degree in engineering (Chemical, Mechanical, Electrical, or related discipline required)., • 10+ years of experience delivering major capital projects, preferably in chemical, petrochemical, oil & gas, or complex process industries., • Proven experience as a Project Engineering Manager or Lead Technical Integrator on large EPC‑executed projects., • Direct experience across front‑end development, FEED, detailed design, construction, commissioning, and handover to operations., • Demonstrated success managing:, • EPC contractors, • Process licensors, • Deep, working understanding of all major engineering disciplines (not just one)., • Strong knowledge of process safety management and risk‑based design., • Ability to make sound technical judgments and influence decisions under uncertainty., • Demonstrated ability to build systems and processes that others can follow and replicate., • Willingness to undertake domestic and international travel, as engineering, procurement, and fabrication activities span the US, Europe, and Asia. What You Will Do Engineering Leadership & Technical Authority • Act as the client Project Engineering Manager for all project engineering and technical matters from front‑end development through construction, commissioning, startup, and handover to operations., • Provide technical leadership and assurance across all disciplines, including:, • Process Engineering, • Mechanical (static & rotating), • Piping & Layout, • Electrical, • Instrumentation & Process Control, • Utilities, off‑sites, and infrastructure, • Define, implement, and govern project‑specific engineering execution plans, processes, and procedures., • Develop and continuously improve corporate project engineering standards, workflows, tools, and best practices to be used across multiple projects., • Establish and align engineering standards with:, • Company requirements, • Industry codes & standards, • US and state regulatory requirements, • Process licensor design packages, • Ensure engineering design quality, safety, and compliance across all project phases., • Lead and ensure closure of all design assurance activities, including:, • HAZID / HAZOP, • LOPA, • SIL / Functional Safety Reviews, • Management of Change (MOC), • Technical deviations and concessions, • Ensure full integration of process plants, utilities, off‑plots, and site infrastructure, with clear ownership and defined interfaces., • Coordinate engineering activities to meet project schedule, cost, and constructability objectives., • Interface closely with:, • Procurement & Strategic Sourcing, • Construction, • Commissioning & Startup, • Operations & Maintenance, • Lead a multi‑disciplinary, multi‑location, and multi‑cultural engineering team., • Influence and align internal stakeholders (operations, construction, procurement) and external partners (EPCs, licensing clints, vendors)., • Communicate clearly with project and executive leadership, escalating risks early and transparently., • Eligible to contribute to Company’s Traditional 401(k) and Roth 401(k) upon hire with Company Contribution, • Multiple comprehensive coverage levels for Medical, Dental, & Vision, • Group Health & Wellness Program, plus special savings on retail items, travel, entertainment, and more through Insperity Works, • Flexible Spending Accounts and Health Savings Accounts, • Basic and AD&D Life Insurance, • Voluntary benefits, including short-term and long-term disability insurance, accident, critical illness, and hospital confinement insurance. Note: The above statements are intended to describe the general nature and level of work being performed by the incumbent. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required for this position. Nexus Circular Is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to that individual’s age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. Nexus Circular provides reasonable accommodation when requested by a qualified applicant with a disability unless such accommodation causes undue hardship. Statement to Third-Party Agencies: Nexus Circular only accepts resumes from agencies with which we formally engage their services. Please do not forward any resumes, as Nexus Circular is not responsible for any fees or charges associated with unsolicited resumes.

Job DescriptionCompany Description Redzone, the Connected Workforce business unit within QAD | Redzone, helps manufacturers make more products for less while greatly improving the employee experience. While there is a lot of hype around digital transformation, the factory of the future, and Industry 4.0, the focus has been on the equipment and technology – not the people. At Redzone, we are all about the people, what we call “the connected workforce.” We make frontline teams more engaged and more productive so their lives improve while contributing to positive business outcomes. We do this by combining exceptional software and world-class coaching, giving our customers an average productivity increase of 26% in 90 days. Redzone brings together Production, Maintenance, and Quality teams, improving the communications between those teams to resolve issues and increase output. Decision-making happens on the shop floor by the people doing the work, in real time, for immediate impact and a better overall employee experience. With an AI powered platform, nearly 2000 plants and over 500,000 users, Redzone is changing the way people work – one plant at a time. Job Description Under the leadership of the SVP of Product and Solutions, the Senior Controls Engineer is responsible for developing and supporting customer data capture from new and existing operational technology (OT) networks as well as integrating needs for a variety of manufacturing suiters, ERP, QA and similar systems. The Senior Controls Engineer will work directly with prospective and existing customers to accurately scope technological solutions aimed to deliver seamless communications between systems per individual project requirements. This position is full time, exempt, remote, with travel expectation of up to 60% of the time. Responsibilities • Influence prospective customers in the pre-sale process to share understanding of the current technology the client has in place, detailed knowledge of Redzone, and effective communication of how to effectively bridge perceived gaps., • Deliver accurate project scopes in terms of hardware and person-hour cost, accurate and timely execution of individual scope of work, and customer satisfaction as measured by after action scope reviews., • Support the pre-sales process with on-site technology assessments including production of automation maps, mapping of existing information flows, system hierarchies and interface points and associated costs estimates., • Develop Customer/Prospect Automation Scope., • Hand off the Solution project to the project manager, ensuring they fully understand the architecture and are aligned on strategy and vision for how to move forward with client/prospect., • Partner with Sales, Support, and IT Teams to answer questions and prepare the Technical RFP., • Effectively communicate proposed solutions ensuring feasibility and confidence in the deployment of the identified solution(s)., • Implement system interface solutions within scope of responsibility as defined above in accordance with internal project management timelines., • Work with existing platform and integration personnel to accomplish internal project management tasks., • Set and document standards to build library of knowledge for known solutions. Develop and support best practices to simplify future workflows and ensure effective communication to customers where appropriate., • Other duties as assigned. Qualifications Must understand: • Industrial Control Systems: SCADA, PLCs, and microcontrollers, • Signals & Instrumentation: sensors and electrical systems (AC/DC), • OT Networking & Infrastructure: OPC UA, MQTT, networking, VMs, servers, • Enterprise Integration: ERP/MES integrations (APIs, middleware, data flows), • Expert communication skills, business acumen, and a problem-solving mindset are required to influence technical and operations executives., • Knowledge and the ability to learn computer-based software are required to perform successfully in this position., • Strong use of Microsoft suite of software (ie. Excel, PowerPoint, teams, word, office)., • Ability to influence at all levels of an organization and possess sound judgement and excellent assessment skills., • Strong written and verbal communication skills., • Willingness to accept coaching., • BS Degree required in related fields; Computer Science, Computer Engineering, Automation Engineering, Industrial Engineering, Electrical Engineering, Electronic Engineering, • 3+ years of Controls/Automation Engineering Experience is preferred., • Technical sales background will be considered (needs to have a strong engineering understanding) Additional Information Compensation Package: • Base pay range: $100,000 - $110,000 USD Annual (12 Months), • Placement within our pay range will vary based on knowledge, skills, experience, and market location variations as well as internal peer equity, • This position is also eligible for commission with potential OTE of $200-220k QAD Inc. is a leading provider of adaptive, cloud-based enterprise software and services for global manufacturing companies. Global manufacturers face ever-increasing disruption caused by technology-driven innovation and changing consumer preferences. In order to survive and thrive, manufacturers must be able to innovate and change business models at unprecedented rates of speed. QAD calls these companies Adaptive Manufacturing Enterprises. QAD Redzone helps to enable QAD’s vision for the Adaptive Enterprise. Labor productivity improvements directly impact efficiency. Productive and empowered employees increase the effective capacity of your plant and accelerate time to productivity for new employees giving manufacturers the agility to increase production beyond what was previously possible without having to invest in production equipment or new plants, and reduce the amount and impact of employee attrition. Empowered employees with a growth mindset take extreme ownership of challenges that impact their production goals, creating resilience in the face of disruption. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. #LI-Remote

Job Description HI, Hope you're doing well This is Pankaj from 4P Consulting please see details below job description P&C Test Engineer/ P&C Technician (1,2,3) Location: Atlanta, GA 30318 (Onsite) Contract: 36-Months Skills, & Abilities: · Knowledge of electrical system operations, distribution systems, and underground construction practices. - Knowledge of SCADA, RTU, PLC, DCS, GIS is preferred. · Ability to read electrical wiring diagrams, troubleshoot equipment, and make sound decisions under pressure. · Ability to work in adverse conditions (heat, cold, wet, etc.) outdoors and to access below grade, tightly enclosed spaces by means of ladders up to 35ft in length. · Proficiency with MS office products and other related engineering software systems. · Ability to prioritize and organize work to manage multiple tasks and meet strict deadlines. · Must be able to build relationships and communicate with customers, engineers, sales, corporate partners, and crew personnel. · Demonstrate good oral and written communication skills. · Ability to prioritize customer service both internally and externally. · Follow through on all aspects of assignments to ensure quality completion. · Must be able to follow safe work practices & policies for a Safety Excellence environment. · Be self-motivated and directed. - Demonstrate initiative, dedication, and willingness to JOB SUMMARY · The Network Underground P&C Test Engineer role ensures the safe and efficient installation, operation, maintenance, and repair of the Network Underground Systems in Atlanta, Macon, Columbus, Augusta, Athens, Savannah, and Valdosta. · Responsibilities include working on energized equipment in enclosed spaces that are below grade, writing switching orders and utilizing hot line tools to perform circuit switching on medium voltage equipment (4KV to 25KV), assisting in the development and implementation of new technology for SCADA system monitoring, participating in an on-call rotation and responding to system emergencies and concerns as they arise, handling customer inquiries (voltage complaints, claims, etc.), and communicating effectively with high profile customers to ensure the highest level of customer satisfaction. Education and Experience: · Bachelor's Degree in Engineering (Mechanical , Electrical is preferred) Or · Associate’s Degree in Electrical, Industrial, Electronics Technology and Experience performing in an engineering capacity the skills and abilities listed above Knowledge Thanks and Regards Sr. Talent Acquisition Specialist Pankaj Mishra +1 205-756-4834

Job Description Immediate W2 contract position available in Atlanta, GA. Estimated Duration: 2 years Job Description: The Engineer Design contractor position assists in the planning, design, and development of technical standards for gas distribution infrastructure projects. The right candidate must be a self-starter, excellent communicator, critical thinker and able to make sound decisions. Natural Gas is an essential part of America’s Energy mix and a trusted energy source for more than 70 million homes and businesses. This position is an exciting opportunity for persons who enjoy the challenges of supporting the construction of natural gas facilities. As our Engineer in the design group, a typical day might include: • Working on gas storage or gas fueling station assignments., • Performing assignments involving the design of components or functionality of pipeline products, • Involved in the planning and design of mechanical equipment and components involving maintenance of mechanical equipment., • Performing system balances to determine the best overall solution to solve system issues or identify system low points and methods to best solve them., • Provide oversight and support for construction activities. This might be the job for you if: • You have a high level of interpersonal skills, with the ability to leverage internal and external stakeholders to efficiently accomplish tasks and resolve issues., • You have the ability and initiative and to work in a self-guided manner and collaboratively., • You have a customer focused critical thinking mindset with a demonstrated ability to learn and become proficient in proposing solutions and completing tasks., • You have excellent oral and written communication skills., • You can work across a matrix organization structure with horizontal and vertical teams. Required Qualifications: • The Engineer 1 position requires 0-5 years of related experience and an accredited bachelor’s degree., • BA/BS in Engineering (Mechanical, Civil or General), • Equivalent academic education and experience. Job Responsibilities: • Responsible for applying engineering processes, design criteria, and software applications to design and construct power related systems., • Supports estimate preparation, develops design options, and prepares construction specifications., • Provide guidance, oversight, and quality assurance reviews for approved contractors as they develop design solutions, cost estimates, and construction packages., • Creating a safe work environment by putting safety first, • Understand the process used for planning, design, operation, construction, and maintenance, • Understanding the functions and activities of various internal departments involved in design, construction, and maintenance, • Understanding design practices and work processes, • Using all software applications used in design, • Understanding industry and Southern Company design standards, • Supporting design standard and criteria development for the system, • Supporting construction and maintenance teams during day-to-day operations, • Estimating material for projects, • Transmitting construction packages and supporting specifications. Certifications/Licenses: • Preferred: Engineer in Training (E.I.T.) Skillsets and Expertise Required: • Project Management, • Ability to communicate with all levels in the organization, • Computer Assisted Design/Geographic Information System - basic proficiency, • MS Office - advanced proficiency, • Basic problem-solving skills, • Limited discretion making independent decisions based on procedure and review with supervisor, • Basic discipline software knowledge, • Strong work ethic, • Positive attitude, • The ability to build effective relationships with plant staff, design engineering staff and/or vendors.Company DescriptionWe provide supplemental employees to the region's most sought after power projects. We credit our success to the commitment we show to our job applicants. E Group Recruiters are here to make sure your job search experience is the best it can be. Our recruiters are experts in knowing what the client manager is looking for in a resume, what bill rate the market will bear, and how to make your application stand out among the rest. Our personal touch continues even after we've found the perfect job for you. All full-time employees are eligible to pay for full health and retirement benefits including BC/BS health and dental insurance, life and disability insurances, and 401K with an immediately vested match is available. We have a dedicated team to guide you through these benefits.We provide supplemental employees to the region's most sought after power projects. We credit our success to the commitment we show to our job applicants. E Group Recruiters are here to make sure your job search experience is the best it can be. Our recruiters are experts in knowing what the client manager is looking for in a resume, what bill rate the market will bear, and how to make your application stand out among the rest. Our personal touch continues even after we've found the perfect job for you. All full-time employees are eligible to pay for full health and retirement benefits including BC/BS health and dental insurance, life and disability insurances, and 401K with an immediately vested match is available. We have a dedicated team to guide you through these benefits.

Job Description You are a P.E. with a B.S. in Mechanical Engineering and 10+ years of hands-on manufacturing and production experience. You have a comprehensive understanding of plant and/or process engineering, machine guarding, and hardcore industrial safety experience. You are already an expert. Robson Forensic will train you to be a forensic expert. As a Mechanical Engineer – Industrial/Manufacturing Expert, you will: • Investigate incidents involving equipment, safety products/procedures, material handling, hand tools, & plant layouts., • Analyze inadequacies in machine guarding, instructions, warnings, or personal protective equipment (PPE), etc., applying your comprehensive knowledge of standards and practices., • Write clear, scientifically sound reports., • Provide expert testimony. You will delve into the "why" behind incidents, critically assessing decision-making, operational procedures, and the standard of care. This role offers you a chance to: • Use your cumulative training, experience, and critical thinking skills., • Collaborate with highly respected experts., • Continuously learn and grow., • Make a tangible difference. LOCATIONS: Miami Lakes/Palm Beach Gardens, FL, Atlanta, GA, Las Vegas, NV, Dublin, OH, Lancaster, PA REQUIREMENTS: • You have a Bachelor’s degree in Mechanical, Electrical, or Industrial Engineering and/or a closely-related field., • You are a licensed Professional Engineer (P.E.) or can obtain licensure in at least one state within six months., • You have 10+ years of manufacturing and production experience, including design, installation, start-up, commissioning, operation, maintenance, and troubleshooting spanning a variety of industrial equipment., • Your expertise must include design or specification of industrial equipment, material handling equipment (such as forklifts, aerial lifts, and cranes), industrial facility operation and maintenance processes, utility systems (steam, water, air, gas, etc.), and manufacturing processes., • Your experience and training in reliability-centered maintenance (RCM), failure mode and effect analysis (FMEA), root cause failure analysis, site incident investigations, and hazard analysis/risk assessments is desirable., • You can work both independently and as part of a collaborative team., • You can manage a portfolio of 40-60 projects/clients., • You have excellent technical, analytical, writing, and communication skills., • You are willing to travel about 20% on average., • You have a valid driver’s license and the ability to drive., • Prior forensic experience is not required. We seek professionals eager to apply their deep industry knowledge to a challenging new domain. ABOUT US: Robson Forensic is a national leader in expert witness consulting, providing technical expertise across many fields within engineering, architecture, science, and a broad range of specialty disciplines. Employees at Robson Forensic work alongside highly respected experts from both industry and academia. Our forensic experts are engaged in meaningful casework that is consequential to industry and society. Robson Forensic provides a unique working dynamic that blends collaboration and autonomy. We are an Equal Opportunity Employer. HOW TO APPLY: If this opportunity meets your expectations for a challenging and rewarding career, and you meet our minimum requirements, please apply and attach your resume and a cover letter outlining your professional background and experience. HOW TO APPLY: If this opportunity meets your expectations for a challenging and rewarding career, and you meet our minimum requirements, please apply and attach your resume and a cover letter outlining your professional background and experience.

Job DescriptionDescription: About the Role Automation Engineer (Level I–III) is a scalable engineering role designed to support a range of experience levels across our automation team. This position may report out of either Atlanta (Hartsfield-Jackson International Airport) or our Sanford, FL Headquarters, depending on project assignment and operational needs. This role is leveled I–III. Placement will be determined throughout the interview process based on résumé review, technical discussion, and skill assessment. Candidates may be aligned at Level I, II, or III depending on demonstrated experience, leadership capability, and technical depth. The posted salary range of $75,000 – $160,000 reflects the full range from Level I through Level III. At the senior end (Level III), this role serves as a technical leader on complex automation projects — owning system architecture, technical execution, and customer confidence from concept through commissioning. At Levels I and II, engineers support and progressively grow into greater ownership, complexity, and leadership responsibilities. CLX Engineering also offers annual performance-based bonus opportunities for Engineers at all levels (I–III), recognizing contributions to project success, technical excellence, and company growth. Typical Experience Range: • Level I: Early-career automation/controls experience, • Level II: 3–5+ years in automation, controls, or systems integration What You’ll Do (Level of responsibility scales based on placement.): • Support or lead technical aspects of automation projects from design through commissioning, • Design and develop control systems across electrical, mechanical, and IT disciplines, • Develop, review, and/or approve PLC/HMI code, drawings, and documentation, • Serve as a technical point of contact for customers and project managers (Level II–III), • Coordinate workloads, priorities, and schedules with engineering and field teams, • Participate in or lead design reviews and troubleshooting efforts, • Mentor junior engineers (Level III), • Experience with PLC and HMI platforms (depth expected to scale by level), • System integration knowledge including SCADA, industrial networks, and data flow, • Ability to operate in fast-paced, high-accountability environments, • Strong troubleshooting and analytical capability, • Professional communication skills; customer-facing confidence (Level II–III), • Willingness to travel with short notice up to 30%-50%, • Experience in live, high-pressure industrial environments, • Strong electrical schematic and controls understanding, • Ability to follow TSA testing requirements and execute test plans, • Proficiency in IEC PLC languages, • HMI experience (FactoryTalk View preferred; Ignition or Wonderware acceptable), • Working AutoCAD knowledge, • Strong written and verbal documentation skills, • Ability to supervise and coordinate with clients, vendors, and trades (Level II–III), • 4+ years PLC programming experience preferred for Level III (Allen-Bradley, Siemens, Beckhoff, etc.), • Ability to pass TSA SIDA and background checks

Job Description Goodwyn Mills and Cawood, Inc. (GMC) are one of the region's largest privately held architecture and engineering firms, with more than 700 employees. We are a regional firm with national experience located in eighteen offices throughout the Southeastern United States. We believe in community, collaboration, and using the power of creativity and hard work to make a difference. We’re looking for the best and brightest to help us reach and exceed our aggressive goals. We place a high value in being part of our communities and giving back throughout the year supporting various charities and local events. We value employee feedback and use that to shape our annual strategic plans. We offer all of this and more because we are only as strong as our people. Our mission is to create opportunities for our people and the people we serve to create communities that thrive. GMC is seeking a motivated Site Civil Engineer/Project Manager to join our Cartersville or Atlanta, GA offices. The successful candidate(s) should demonstrate proficiency in site civil design, collaboration, respect among co-workers and client relationship skills. This individual will be responsible for successfully managing client relationships in conjunction with training a growing site civil team for commercial, institutional, municipal and residential projects. We have the advantage at GMC to work on a variety of project types and sizes within the public, private, institutional, commercial, educational and residential sectors. Essential functions and responsibilities include: • Overseeing site civil efforts on a variety of projects and having the ability to design and oversee site layout, grading, stormwater/drainage, infrastructure, erosion & sediment control from concept through completion, • Prepare stormwater management designs and reports, conduct hydraulic and hydrology analyses, and develop SWPPPs., • Manage site civil workflows to ensure projects stay on schedule and meet quality standards., • Maintain up-to-date knowledge of local, state, and agency requirements for all project phases., • Collaborate with clients, project team members, contractors, and government agencies as needed., • Coordinate with permitting authorities and local officials to secure site-related permits and oversee as-built documentation and platting through project closeout., • Perform QA/QC reviews on civil plans and reports to ensure accuracy and compliance., • Travel as necessary to support project execution, client meetings, and company functions., • Reinforce GMC standards and Core Values within project teams and across the organization., • Participate in local professional societies to maintain industry engagement and professional development., • Bachelor’s degree in Civil Engineering or tenured professional in the civil engineering field with Bachelor’s in a related engineering discipline, • Minimum of 10 years of site civil engineering experience with a variety of projects, • Professional Engineering (PE) license, • Proficient in Civil 3D and other stormwater design software, • Experienced in stormwater system design, hydraulic analysis, and reporting, • Strong written and verbal communication skills, • Comprehensive health, dental, and vision insurance, • 401K retirement plan with company match, • Professional development support, • Flexible work schedule, • Competitive paid time off and holidays About GMC We believe in community, collaboration, and using the power of creativity and hard work to make a difference. Whether designing schools, parks, hospitals and other commercial developments, or providing clean water, safe streets and restoring resilient environments, GMC takes great pride in serving our communities through the transformative work we do. Every project is guided by the foundational concept that communities are built by people, not companies, and we strive to serve our communities with quality, integrity, creativity and care. One of the Southeast’s most comprehensive multi-disciplined firms, GMC is equipped to provide all of the services associated with architecture, interior design, civil engineering, environmental services, landscape architecture, planning, transportation engineering, geotechnical engineering, electrical engineering, surveying and disaster recovery.

Job Description One of the region’s largest privately held architecture and engineering firms, this organization employs more than 700 professionals across eighteen offices throughout the Southeastern United States. With regional roots and national experience, the firm emphasizes community, collaboration, and the power of creativity and hard work to make a meaningful impact. The team is driven by ambitious goals and a commitment to excellence. A strong emphasis is placed on community involvement, with active participation in charitable initiatives and local events throughout the year. Employee feedback plays a key role in shaping annual strategic plans, reflecting a people-first philosophy. The mission is to create opportunities for both employees and the communities served, helping to build environments where people can thrive. The firm is seeking a motivated Site Civil Engineer/Project Manager to join offices in Cartersville or Atlanta, GA. The ideal candidate will demonstrate proficiency in site civil design, strong collaboration skills, and the ability to build and maintain client relationships. This role includes managing client engagements while mentoring and developing a growing site civil team across commercial, institutional, municipal, and residential projects. The position offers exposure to a wide variety of project types and scales across public, private, institutional, commercial, educational, and residential sectors. Essential functions and responsibilities include: • Oversee site civil efforts across multiple projects, including site layout, grading, stormwater/drainage, infrastructure, and erosion & sediment control from concept through completion, • Prepare stormwater management designs and reports, conduct hydraulic and hydrology analyses, and develop SWPPPs, • Manage workflows to ensure projects remain on schedule and meet quality standards, • Maintain current knowledge of local, state, and agency requirements across all project phases, • Collaborate with clients, project teams, contractors, and government agencies, • Coordinate with permitting authorities and local officials to secure approvals and oversee documentation through project closeout, • Perform QA/QC reviews on civil plans and reports to ensure accuracy and compliance, • Travel as needed to support project execution, client meetings, and organizational activities, • Reinforce organizational standards and values within project teams, • Participate in professional organizations to support ongoing development and industry engagement, • Bachelor’s degree in Civil Engineering (or related engineering discipline with significant experience), • Minimum of 10 years of site civil engineering experience across diverse project types, • Professional Engineering (PE) license, • Proficiency in Civil 3D and stormwater design software, • Experience with stormwater system design, hydraulic analysis, and reporting, • Strong written and verbal communication skills, • Comprehensive health, dental, and vision insurance, • 401(k) retirement plan with employer match, • Professional development support, • Flexible work schedule, • Competitive paid time off and holidays, • Bonus opportunities Equal Opportunity Employer / Disability / Veterans About the Organization The firm is committed to strengthening communities through thoughtful design and engineering solutions. Projects range from schools, parks, and healthcare facilities to commercial developments, clean water systems, transportation infrastructure, and environmental restoration. Each project is guided by the belief that communities are built by people, and the work reflects a dedication to quality, integrity, creativity, and care. As a multidisciplinary organization, services include architecture, interior design, civil engineering, environmental services, landscape architecture, planning, transportation engineering, geotechnical engineering, electrical engineering, surveying, and disaster recovery.

Job DescriptionStrength in Trust OneTrust's mission is to enable innovation through the responsible use of data and AI. We believe that ensuring data is trusted shouldn't slow teams down—it should accelerate what's possible. This led us to develop the first technology platform for responsible data use in 2016. Today, with AI representing the latest and most impactful expansion of data yet, OneTrust is once again redefining what responsible innovation looks like. OneTrust, the AI‑Ready Governance Platform™, unifies regulatory intelligence, automation, and connected governance workflows so businesses can continue to move at the speed of AI while ensuring good governance to prevent data misuse at scale. Trusted by thousands of organizations worldwide, OneTrust is shaping the future where trusted data becomes a transformative force for business and society. The Challenge We're looking for a Senior Software Engineer that will report to the Development Manager / R&D Head. In this role, you will part of the R&D Team that works on mission-critical applications. Your Mission • Contribute in all phases of the development lifecycle., • Write well designed, testable, efficient code, • Ensure designs are in compliance with specification, • Own your code in production, responding to incidents as they occur and participating in retros to determine how to be better in the future, • Prepare and produce releases of software components, • Support continuous improvement by investigating alternatives and technologies and presenting these for architectural reviewYou Are, • BE/BTech/MS degree in Computer Science Engineering or a related subject., • Experience in software application development using Java, Spring and Hibernate., • Experience in Spring Boot, Micro services is a plus., • Strong knowledge of algorithms, data structure and design patterns., • Experience with SQL and NoSQL technologies., • Sound understanding of concepts of Restful services., • Solid understanding and experience of Application Server and middleware technologies. Each role may have specific requirements or flexibility depending on the scope of the position, so we encourage you to verify this with your recruiter during your first interview. Benefits As an employee at OneTrust, you will be part of the OneTeam. That means you'll receive support physically, mentally, and emotionally so that you can do your best work both in and out of the office. This includes comprehensive healthcare coverage, flexible PTO, equity RSUs, annual performance bonus opportunities, retirement account support, 14+ weeks of paid parental leave, career development opportunities, company-paid privacy certification exam fees, and much more. Specific benefits differ by country. For more information, talk to your recruiter or visit onetrust.com/careers. Resources Check out the following to learn more about OneTrust and its people: • OneTrust Careers on YouTube Recruitment fraud warning: OneTrust is aware of scams involving false offers of employment with our company. The fraudulent jobs, interviews and job offers use fake websites, email addresses, group chat and text messages. Be aware that we never ask candidates for personal information, IDs or bank information during the interview process. We do not interview prospective candidates via instant message or group chat, and do not require candidates to purchase products or services, or process payments on our behalf as a condition of any employment offer. Please note that any legitimate interview availability requests will come directly from a OneTrust recruiter with an "@onetrust.com" email address. You may also receive legitimate emails from "@us.greenhouse-mail.io". Recruiters will only reach out to candidates who have applied for a role through our ATS (Greenhouse) or prospects via LinkedIn InMail. Job offers will come from a recruiter and may have a "@docusign.net" email address. For more information or if you have been targeted please reach out to . Our Commitment to You When you join OneTrust you are stepping onto a launching pad — the countdown has begun. The destination? A career without boundaries working alongside a diverse and inclusive crew who is passionate about doing meaningful work. As a pioneer, your voice and expertise will help chart the direction of an entirely new category. Our commitment to putting people first starts with you. Your growth is part of the mission. Our goal is to give you the power to embark on the next phase of your uniquely, unique career. OneTrust provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by local laws.

Job DescriptionCareer Renew is recruiting for one of its clients an Enterprise Account Executive - Fintech - this is a fully remote role for US based candidates Salary range: 100-150K USD yearly plus benefits. We're building the infrastructure layer for the next generation of global payments. Cross-border money movement is one of the most complex, fragmented, and underserved problems in financial services — and we're solving it at the infrastructure level, for the fintechs, PSPs, and financial institutions that power global commerce. We believe in a world of fair economic opportunity, where global commerce can flourish through the frictionless exchange of value. Our first steps toward that vision are enabling drastically faster, cheaper, and more reliable transactions for businesses in emerging markets — and we're backed by investors who share that conviction, including Dragonfly, Circle, and Coinbase. We're here to build, and we mean that. We empower our team to act like founders, make bold decisions, and deliver outcomes that matter. If you're energized by hard problems, big markets, and real ownership over your work, you'll fit right in. Role Overview We are seeking an Enterprise Account Executive to drive sales of our cross-border payments and banking infrastructure solutions to global fintechs, payment service providers, non-bank financial institutions, and enterprise technology companies in the US. This is a senior, high-autonomy role for someone who has spent years building real expertise and real relationships in the US payments and fintech space and has the revenue track record to show for it. You'll own the full sales cycle from initial outreach through solution design, close, and implementation, working closely with internal teams to deliver payment infrastructure that is both technically sound and commercially compelling. We're looking for someone who is deeply self-motivated, brings an established network they can activate from day one, and possesses the technical grounding to lead product conversations with confidence — able to articulate how our product works, how integrations are structured, and how our infrastructure fits a client's use case, without requiring a solutions engineer in every room. Key Responsibilities * Own the full sales cycle — lead deals from prospecting and qualification through commercial negotiation, close, and post-sale implementation planning, maintaining continuity and accountability across every stage of the process. * Build and drive your own pipeline — leverage your existing network in the US fintech and payments ecosystem to generate and manage your own book of business, supplemented by market intelligence and targeted outreach. Pipeline generation is a core part of this role, not an afterthought. * Lead technical discovery and solutioning — engage prospects at an architecture level across payment rails, integration models, compliance frameworks, and treasury operations, with enough fluency to build credibility with both technical and commercial stakeholders without needing a solutions engineer in the room every time. * Design tailored solutions — collaborate with internal solution architects, compliance, and product teams to develop client-specific proposals that are technically feasible, commercially structured, and regulatorily sound. * Lead commercial negotiations — structure pricing, contracts, and partnership terms that reflect client objectives while aligning with our business and compliance framework. * Execute pre-sales effectively — develop compelling proposals, pitch materials, and solution narratives for a range of buyer personas, from engineering and product leaders to CFOs and C-suite decision makers. * Support onboarding and implementation — work with implementation teams post-close to ensure a smooth client transition and successful go-live, maintaining accountability for the outcome beyond the signed contract. * Represent Conduit externally — participate in industry conferences and client meetings, contributing to our visibility and reputation in the fintech and payments ecosystem. Qualifications * 5+ years in enterprise B2B sales in payments, fintech, or banking infrastructure — with a track record of hitting and exceeding quota on complex, multi-stakeholder deals. * Hunter mentality — you're proactive and driven by finding and winning new business, taking genuine ownership of pipeline generation rather than relying on inbound or team-generated opportunities. * Proven revenue impact — a clear and demonstrable history of building pipeline, closing significant deals, and developing client relationships that grow and compound over time. * A strong, active US network in the fintech, PSP, and payments infrastructure space, with the ability to generate real conversations and real pipeline from day one. * Payments infrastructure expertise — solid working knowledge of global payment rails (SWIFT, SEPA, ACH, FPS, RTP), API-driven integrations, compliance frameworks (AML, KYC, safeguarding), and treasury and settlement operations. * Full-cycle sales ownership — you've run deals from first cold touch through close and post-sale implementation, maintaining continuity and accountability at every stage. * Builder mentality — you're comfortable with ambiguity, energized by a fast-moving environment, and motivated by the opportunity to create something rather than manage something already built. * Executive presence and technical credibility — equally effective in a boardroom and a detailed product conversation, with the ability to adapt your approach without losing depth or credibility. * Bonus: Experience with stablecoins, embedded finance, or global settlement networks. Why Conduit We're at an important inflection point in our growth — strong momentum, an expanding global footprint, and a product that is genuinely differentiated in a market that is moving fast. Cross-border payments infrastructure is not a crowded space with an obvious winner yet, and that matters for the kind of opportunity this role represents. For the right person, this is a chance to join at a stage where your contribution is visible, your impact is measurable, and the commercial opportunity in front of you is significant. We're looking for an ambitious, driven sales professional who is energized by that kind of ownership, excited by the scale of what we're building, and ready to make the most of it.

Job Description Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufacturers of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Morris South is a division of Morris Group, Inc. We supply CNC machine tools, tooling, accessories, software, automation, and more to manufacturers of precision machined parts. Our customer base is located in the southeast U.S. We serve manufacturers in Alabama, Arkansas, Georgia, Mississippi, North Carolina, South Carolina, Tennessee, and Virginia. Our mission is to help manufacturers from all industry sectors achieve and maintain a competitive advantage by improving productivity. We help you make better parts, less expensively. Summary of Responsibility: As a Swiss CNC Machinist, you will use your technical skills to identify and provide dependable solutions for our diverse customer base. Managing customer projects, demonstrations, and other customer related questions to ensure they are completed on time and within budget. The Swiss CNC Machinist is the first line of support for our customer experience. The person filling this role is responsible for handling multiple high-level technical tasks that surround the use and implementation of CAM software, CNC Machining of complex parts, and working on multi Axis CNC Machines. The Engineer will also work with pre-sales to assist on quotes for customers application. Being flexible to work on multiple tasks at one time. What You Will Contribute: * Running turnkey projects, demonstrations, and other customer related projects to ensure they are completed on time and within budget * Conducting pre-sale activities and reviews including customer visits, evaluation of opportunities, machine assessment and recommendations, part processing recommendations and development of turnkey proposal * Developing/ implementing custom demonstrations and training customers in the safe set up and operation of CNC machining centers, lathes, grinders, Swiss style lathes and/ or multi-tasking machines * Conducts training of customers in the safe set-up and operation of CNC machining centers, lathes, grinders, Swiss style lathes and/or multi-tasking machines. * Making accurate cost estimates, writing engineering reports, and interpreting plans and specifications * Travel to customers for on site training and engineering assistance is mandatory. Other Function * Perform related duties as required The duties listed above are intended only as an illustration of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar or a logical assignment to the position. Qualifications & Competencies: * Experience in Sliding Headstock (Swiss) CNC machine tool related engineering and manufacturing * Possessing and maintaining an in-depth knowledge of machine tool industry and product lines represented by the company * Experience working on Star, Citizen, or Tsugami machines. * Knowledge of Fanuc based controls, 5-axis experience is a plus * Experience with CAD/CAM software, preferred but not required. * Able to think quickly, assess a situation and make a sound decision. * Ability to perform job with integrity and values consistent with the Morris Group Values What’s in it for You: We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work: • Competitive starting salary, • Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance, • 3+ Weeks’ Vacation to Start, • 10 Company Paid Holidays, • 401(k) retirement plan with company contribution, • Tuition reimbursement, • Employee appreciation events and perks, • Employee Assistance Program Mental and Physical Requirements: The physical demands and characteristics of the work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. * Must be highly mobile, able to access all areas of the premises. * Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects. * Ability to sit for prolonged period of times. * Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees. * Ability to frequently use hands and arms. * Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. * Ability to work responsibly and professionally in dynamic job sites that may involve tight timelines, changing priorities, and interaction with customers and team members. Certain positions are designated as safety-sensitive due to the nature of the work performed. Employees in these roles may also be expected to: * Ability to stand, walk, bend, kneel, crouch, climb, and reach for extended periods while servicing equipment. * Ability to work in tight spaces or awkward positions, including accessing equipment interiors and elevated areas. * Strong hand–eye coordination and fine motor skills required for precise electrical, mechanical, and diagnostic work. * Ability to work in industrial environments, with exposure to noise, lubricants, coolants, metal chips, and other manufacturing conditions, while consistently wearing required personal protective equipment (PPE). Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status or other characteristics protected by law. Requisition #1563C

Job DescriptionAHEAD builds platforms for digital business. By weaving together advances in cloud infrastructure, automation and analytics, and software delivery, we help enterprises deliver on the promise of digital transformation. At AHEAD, we prioritize creating a culture of belonging, where all perspectives and voices are represented, valued, respected, and heard. We create spaces to empower everyone to speak up, make change, and drive the culture at AHEAD. We are an equal opportunity employer, and do not discriminate based on an individual's race, national origin, color, gender, gender identity, gender expression, sexual orientation, religion, age, disability, marital status, or any other protected characteristic under applicable law, whether actual or perceived. We embrace all candidates that will contribute to the diversification and enrichment of ideas and perspectives at AHEAD. LAUNCH – Join AHEAD's Associate Development Program Our Mission: to attract and develop a diverse community of THE top IT consulting talent in the country and build AHEAD’s next generation of leaders. LAUNCH serves as the foundation to develop our talent into high potential leaders at AHEAD. By exposing you to a variety of career paths and building your acumen across different practices in the business, we’re accelerating your growth and career trajectory at AHEAD. Our development program is built on a foundation of technical training, completion of certifications, and shadowing, all supported by an ecosystem of AHEADians that will be part of your Launch journey, every step of the way! You’ll grow and develop key skills that will support your development as a technical and consulting expert. If you’re ready to begin an exciting career in IT Consulting, LAUNCH is where you should be! Associate Data Engineer (Internally known as an Associate Technical Consultant) As an Associate Engineer in LAUNCH, you will start out in a 3-month training program within our Digital Solutions Group (DSG) practice focused on Data solutions. Upon completion of LAUNCH, you will have the opportunity to work on client projects based on skillset, personal interest, and business needs. Who we’re looking for: Think Big, Learn, and Be Curious • Innovative Thinkers, • Enthusiastic Collaborators, • Creative Problem Solvers, • Curious Self – Starters Responsibilities:, • Ability to communicate effectively across teams, and build positive relationships, • Demonstrate ability to work on teams, collaborate on projects, and contribute to the overall successful delivery of projects, • Demonstrate drive and proactiveness to get things done, be solutions–oriented, and enjoy solving complex problems, • Demonstrate resourcefulness, curiosity, creativity, courage, critical thinking, and a desire to use technology to search for new and innovative solutions to problems, • Exercise sound reasoning, ingenuity, and inclusive perspectives to analyze issues, solve problems and make recommendations, • Ability to execute, manage competing priorities, and deliver to deadlines Qualifications:, • Experience any of the programming languages (Python, Java, Scala, Go, etc.), • Working knowledge of supporting data structures including but not limited to SQL and NoSQL databases, • Willingness to travel to support client projects and shadowing opportunities (50+ % of the time), • Existing U.S. work authorization is requiredPreferred Experience, • Understanding of one of the data platforms (ex. Hadoop, Spark, Databricks, Snowflake), • Working knowledge of Cloud SolutionsExperience in at least one of the below:, • Graduated with a degree in technical discipline by 6/8/2026, • Prior intern, co-op, or research experience in IT, software, or relevant field is a plus, • Successful completion in a technical–related bootcamp

Job Description About Bell and Howell Bell and Howell delivers technology-driven Automation Services and Automation Solutions that help businesses optimize performance, reduce downtime, and improve customer experiences. Our Automation Services bring a dedicated team of expert mechatronic service engineers completely covering North America and backed by our Integrated 360™ advanced technology enabling remote repair, diagnostics, automated SmartOps Dispatch™ and 24/7/365 technical assistance for our clients. We provide a comprehensive and certified level of support for thousands of diversified clients. Our Automated Solutions product portfolio consists of next-generation equipment delivering best-in-class performance enhancing workflow efficiency and elevating customer experiences across multiple markets including retail, pharmaceuticals, packaging, mail production, ecommerce and manufacturing – all backed by the best service in the industry. Location: Atlanta, GA Hourly Range: 23-30/hr Summary: The Field Customer Service Engineer serves as primary customer contact on technical and service-related problems on a wide range of industrial, robotic and printing equipment. Diagnoses electronic, mechanical, software and system failures, using established procedures provided by our highly rated service training department. This job may include any aspect of field support, including electrical/electronics, hardware, software, PC’s, and networking. Provides technical support to customers on operational or maintenance aspects of system equipment. Determines most cost-effective repair/resolution to minimize customer downtime. NOTE: THIS IS NOT AN INFORMATION TECHNOLOGY (IT) POSITION – requires electrical and mechanical experience Duties and Responsibilities: • Primary responsibility will be to install, troubleshoot and repair a variety of industrial products that include, but are not limited to; printing and packaging equipment, cash recycling products, inserting and sorting machines, credit card attaching and processing systems, robotics and any other applicable third-party accessories attached as part of the system., • Schedule and perform regular predictive/preventive maintenance inspections on equipment., • Provide support by managing parts inventory, customer service calls and preventative maintenance schedules., • Foster positive customer relations and a high degree of customer satisfaction by communicating effectively with customers., • Act as a liaison between the customer and other departments/functions of the company. Competencies (Skills, Knowledge and Abilities): • Requires understanding of computer program functionality and software troubleshooting skills., • Strong interpersonal/customer relation skills., • Ability to build and maintain strong customer relationships by understanding their operations and instilling confidence with effective proactive communication., • Ability to effectively resolve conflict internally and externally., • Ability to accomplish the describe duties through appropriate hand, power, and testing tools/equipment., • Ability to reason logically and make sound decisions along with considering alternative and diverse perspectives., • Strong analytical, problem-solving, quantitative, and time management skills., • Ability to communicate effectively both orally and in writing., • Ability to understand, remember and follow verbal and written instructions., • Ability to work as an integral part of a team., • Ability to read and understand written procedures and diagrams for assembly and test., • Ability to develop and implement solutions to assembly problem., • High School degree or equivalent with 2-year degree or diploma in electronics/advanced mechanics/software training with 1+ years related industry/equipment experience, or equivalent combination of education and experience., • Requires strong electronics and mechanical background, understanding of computer program functionality and software troubleshooting skills This position requires minimal travel in the United States and Canada for training and other requirements. For field only, local travel time could be greater than 50%. Physical Requirements: • Ability to use standard and specialized hand, power and diagnostic tools and measuring equipment, such as oscilloscopes, DMM, gauges, etc., • Requires lifting to waist seventy (70) pounds., • Requires walking and standing; using hands to feel objects; reaching; and requires balance., • Requires bending, stooping, kneeling, crouching and/or crawling for periods of time., • Ability to work in a loud environment., • Ability to work in small, cramped areas., • Ability to work in elevated environment up to twenty (20) feet. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Bell and Howell is an Equal Opportunity Employer. It is company policy to administer employment based solely on an individual’s qualifications, ability and performance without regard to race, color, religion, gender identity, sex (including pregnancy, lactation, childbirth or related medical conditions), sexual orientation, age, national origin or ancestry, physical or mental disability, genetic information (including testing and characteristics), veteran status, uniformed servicemember status, marital status, or any other characteristic protected by federal, state or local law.

Job DescriptionDescription: Program Manager - Power Distribution Location: Atlanta, GA (Remote) Are you an experienced Program Manager looking to join a supportive, passionate team? We have an attractive opportunity for you! ABOUT THIS OPPORTUNITY: As the Program Manager, you will oversee program execution from start to finish, providing strategic direction, mentorship to project managers, and exceptional client relationship management. You'll collaborate with cross-functional teams, monitor KPIs, optimize workflows, and ensure projects are delivered on time, on budget, and to the highest standards. This is not an Information Technology-related position. If you do not have experience managing power distribution engineering/design projects, you will likely not be considered for the position. Note: This position can work remotely, but new hires will be required to come to our headquarters in Perrysburg, OH, for an initial 2-week in-person paid orientation and training period. Responsibilities: Project Leadership: · Responsible for measuring and developing the project manager's abilities and effectiveness through KPI's and setting core competencies in accordance with corporate governance. · Work closely with cross-functional teams to ensure smooth project implementation and customer satisfaction. · Attend industry events, conferences, and networking opportunities to enhance the company's visibility. · Serve as a mentor and coach to other project managers, offering guidance and support. Program Planning and Strategy: · Oversees project managers in the delivery of all program-related projects in accordance with the contractual agreement, scope, schedule, and budget of the project. · Oversee the planning, scheduling, and execution of all phases of projects within the designated program in accordance with project management processes, policies, guidelines, and corporate governance. · Develop and monitor high-level project workflows, validate project scopes, and collaborate on project priorities. · Oversees the creation of proposals, kickoff meetings, and discovery calls. Program Monitoring and Reporting: · Prepare, review, and approve project change orders and/or correction actions in collaboration with the client, Project Engineer(s), and Operations Manager. · Provide program cost forecasting over the life of the project or program. Program Closure: · Ensure the successful closure of the program, including finalizing all program activities, obtaining acceptance from stakeholders, and conducting post-program evaluations. · Document lessons learned and share best practices with the organization. Communication: · Maintain clear and consistent communication with program stakeholders, including executive leadership, project managers, and cross-functional teams. · Provide regular program updates to management and stakeholders. · Resolve conflicts and facilitate effective communication within the program team. · Liaises between project members, cross-functional teams, external vendors, and other stakeholders to ensure deliverables, requirements, schedules, cost, and meeting plans are communicated. · Accountable for contractual correspondence and communication with all stakeholders, including identification and reporting of risks, liabilities, and opportunities. Risk Management: · Identify potential risks and issues that may impact project success and develop risk mitigation plans and contingency strategies. Monitor and manage risks throughout the project life cycle. Budget Management: · Manage Program level P&L reporting. Customer/Client Relationship Management: · Build and maintain strong relationships with existing clients, understanding their needs and providing exceptional service. · Build relationships with Sr. Leadership within the customer organization. · Build an understanding of the customer’s organizational structure and decision-making process. · Identify and understand client challenges, propose solutions, and tailor product/service offerings accordingly. · Conduct thorough market research to stay informed about industry trends, customer preferences, and competitor activities. · Lead Program update calls and in-person meetings with external clients. · Monitor and manage expectations of communication between staff and external clients. · Develop and execute a strategic plan to identify and target new business opportunities in the market. · Collaborate with the sales team to develop sales strategies, set targets, and achieve revenue goals. · Prepare and deliver compelling presentations and proposals to potential customers. · Negotiate contracts and terms of agreements with clients, ensuring a win-win outcome for both parties. · Maintain accurate and up-to-date records of sales activities and client interactions in the CRM system. · Keep abreast of the company's product/service offerings, updates, and enhancements. · Other duties as assigned. Competencies: Fit/Gap Analysis | Needs Analysis | Project Administration | Project Controls | Project Development | Project Estimation | Project Evaluation | Project Implementation | Project Lifecycle Management (PLM) | Project Management | Project Planning | Project Portfolio Management (PPM) | Project Scheduling | Project Status Reporting | Scope Management | Stakeholder Management | Project Management Software | Customer Satisfaction | Vendor Management | Contract Negotiation Requirements: WHAT WE'RE LOOKING FOR: • Education Requirements – Bachelor’s of Science in Engineering/Engineering Technology or Bachelor's of Business Administration; or an equivalent combination of education and experience., • Experience Requirements - A minimum of 7 years of experience in the Power Utility Industry with engineering, operations, and /or project management, including financial oversight and personnel development. And a minimum of 3 years of functional, or direct people management experience, with the proven ability to lead, motivate, and influence., • Project Management Certification (PMP) or equivalent certification required., • Proven experience in project management, with a track record of successfully delivering projects on time and on budget., • Strong leadership, communication, and interpersonal skills, with the ability to manage multiple stakeholders with competing priorities., • Must be results-driven with a dedicated focus on achieving successful project performance, customer satisfaction, and organic sales growth., • Demonstrated a level of understanding of commonly used project management concepts, practices, and procedures., • Adaptability and problem-solving abilities., • Exceptional attention to detail and organizational skills., • Available during the “core” work hours of 8:00 a.m. to 5:00 p.m. Evening and weekend work may be required as duties demand., • Willing and able to travel regularly (30%+), which will include planned overnight travel, • Dependable transportation, a valid driver’s license, and insurance, • Able to pass a background check/drug test/driving record check., • Must be able to endure frequent, lengthy periods of sedentary work and sit for prolonged periods of time., • Must be able to utilize a computer keyboard, computer monitor, and telephone for prolonged periods of time., • Must have the physical ability to perform activities such as preparing and analyzing data and figures, transcribing notes, and viewing a computer terminal; these activities require close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus., • Must have the physical ability to express or exchange ideas by means of the spoken word and convey detailed or important spoken instructions to other workers accurately, often in a group setting. Pay is commensurate with experience and education. Sigma is an equal opportunity employer and will not discriminate based on an employee’s race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any other classification protected by law. PM22

Encore Global - - Responsibilities: Set up and operate basic audiovisual equipment for events; Ensure flawless event execution through timely setup and breakdown; Provide excellent customer service and maintain client relationships on site; Troubleshoot equipment and software issues as they arise;

Reporting to the Creative Director, the Technical Sound Designer is a primary driver of audio craft and influence for sound design throughout the studio helping to shape audio content innovation and direction. Provides full audio development and production as outlined in Sound Designer positions as

Encore Global - - Responsibilities: Set up and operate basic/small-scale audiovisual systems; Ensure flawless event execution through accurate setup, operation, and breakdown; Provide excellent customer service and maintain client relationships; Troubleshoot equipment and software issues; Complete

Encore Global - - Responsibilities: Set up and operate basic audiovisual equipment; Ensure a flawlessly executed event through accurate and timely setup, operation, and breakdown; Maintain a positive relationship with clients through effective communication; Troubleshoot and resolve equipment and s

Reporting to the Creative Director, the Technical Sound Designer is a primary driver of audio craft and influence for sound design throughout the studio helping to shape audio content innovation and direction. Provides full audio development and production as outlined in Sound Designer positions as

A prominent online retailer is looking for a talented Video Editor to join their Marketing team.You will be responsible for editing engaging video content for ads and social media, working collaboratively with various stakeholders.Ideal candidates will have a degree in film production and experience

A leading consulting firm is seeking a Part Time Video Producer/Editor to support corporate communications remotely.The role involves guiding stakeholders on virtual recording best practices and conducting end-to-end video post-production.The ideal candidate should have advanced skills in Adobe Prem

A faith-based nonprofit organization is seeking a Video Editor Volunteer to create compelling video content supporting their mission against human trafficking.This part-time role involves editing footage, managing the YouTube channel, and collaborating with a creative team.Ideal for someone passiona

Video Producer/Editor Anywhere Type: Contract Category: Marketing Industry: Financial Services Workplace Type: Remote Our client seeks a Part Time (roughly 20 hours per week) Video Producer/Editor to support corporate communications for innovation and technology initiatives.The role blends tech

Apply motion graphics, text overlays, sound design, and color correction to elevate the final product.

Join to apply for the Video Editor Volunteer role at Operation Mobilization USA Freedom Challenge USA Part-Time (8-10 Hours/Month) | Volunteer Role, 6 month minimum Are you a creative storyteller with a passion for video editing and digital media? Join Freedom Challenge USA as a Video Editor Volunte

A dynamic content agency is seeking a freelance video editor to produce both short-form and long-form content efficiently.You will collaborate with the Creative Director to transform raw footage into polished, high-performing videos for social media, advertisements, and marketing.Ideal candidates ha