Trabajos sound engineer en Pittsburgh, PennsylvaniaCrear alertas

Job Description The Audio Engineer is a member of our Production Team. The role requires extensive knowledge of installing audio systems in temporary venues, both indoor and outdoor. The ideal candidate has previous experience with national-level artists, theatre, and corporate events. The majority of this work will take place in Pittsburgh, PA with occasional travel as needed to show sites in the region. Pay rate commensurate with experience, ranging from $21.64 to $24 per hour (with opportunity for overtime). Key Responsibilities: • Plan and configure audio systems, including PA systems, wireless microphones, intercoms, and digital mixing consoles., • Preparing equipment as needed in the shop, and conducting quality control checks upon return., • Directing the implementation of equipment during: transportation, load in, show, load out., • Operate FOH or monitor mixing consoles during live events, ensuring optimal sound quality., • Collaborate with producers, directors, and other technical teams to align audio requirements with event goals., • Diagnose and resolve audio issues quickly and efficiently during setup and live events., • Support other technicians with troubleshooting advice and support., • Manage and mentor technicians and other crew members to ensure smooth operation and setup., • Ensure all equipment and practices meet industry safety and regulatory standards., • Contribute to the maintenance, repair, and inventory of audio equipment., • Excellent adaptability and client service skills (verbal and written) to communicate effectively with clients and peers., • Act as a Site-Lead if necessary., • Assist other company departments as work demands require. Candidate Qualifications & Competencies: • Relevant certifications and/or a degree in Audio Engineering or a related field is preferred., • Proven expertise as an advanced A1 in live event production, with a strong track record in various events (corporate A/V, theatre, and concert audio productions)., • Proficiency with digital and analog consoles, RF management, and audio signal flow. Specific systems that are highly desired include: Dante Level 2 certification, Waves SoundGrid, Line Array System Deployment Software, Shure Wireless Workbench and AVID, Digico, and Yamaha digital mixing consoles (more experience is always welcome)., • Perform on site audio rigging and can identify compromised rigging hardware., • Strong knowledge of electrical systems and low voltage wiring., • Stay calm under pressure and resolve technical issues in real-time., • Lead and direct technicians and stagehands (including Union/House crew) of varying abilities and experience across multiple disciplines., • Strong communication skills for coordinating with diverse teams., • Can operate as an A2 or A3 as needed per event., • Can work independently as well as on a team., • FLEX Inventory software knowledge is a plus., • Professional understanding of the artistic process and the ability to work closely with clients, including artists, performers, and designers, in a diplomatic way., • Operate a company owned vehicle including box trucks, pick up trucks, or cargo vans with a valid driver's license and ability to maintain DOT medical clearance., • Must be over 18 and legally permitted to work for this employer in the US., • Valid Driver's License. Physical Demands and Work Environment: This description is representative of requirements that must be met by an employee to successfully perform essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Must sit, stand, and walk for extended periods of time., • May operate in a warehouse setting, and be required to use a computer for inventory and event prep work., • May frequently be required to lift, push, pull, and carry up to 50 pounds., • Must be comfortable with ladders and heights., • Must be able to read, see, hear, and speak English., • Must be able to independently travel to off-site locations, potentially on short notice., • Must be willing to work in outdoor venues which may experience inclement weather and varying temperatures., • Must be willing to work flexible hours, including nights, weekends, holidays, and overtime as required. A Few Friendly Notes Before You Apply What to Expect We’ve done our best to outline the key responsibilities and expectations for this role, but like most things in our industry, the details can shift. This description should be seen as a general guide, which may be updated or modified from time to time, rather than a complete list. We’re a flexible team, and we hope you are too! We value adaptability and a collaborative spirit in our team. Work Eligibility In line with federal law, everyone we hire needs to be able to work in the U.S. and complete the standard employment verification paperwork when they join the team. This includes verification of your identity and eligibility to work for us. Everyone’s Welcome Flyspace is an equal opportunity employer. That means we don’t just welcome diversity, we celebrate it. We hire talented humans of all backgrounds and identities, and we’re committed to building an inclusive workplace where everyone can thrive. If you’re into respect, collaboration, and creativity, you’ll fit right in. Let’s Talk Money We believe in being upfront about pay. That’s why we include salary ranges or hourly pay expectations in all our postings, no guesswork required. While Pennsylvania doesn’t mandate this (yet), we think it’s the right thing to do. We also offer a great benefits package, starting on day one. Need Accommodations? Flyspace is committed to creating an inclusive and welcoming workplace and encourage people of all abilities to apply. We will do everything we can within reason to make sure that you are able to participate in the application process and that you are evaluated in an environment that best allows us to assess your skills. If you need reasonable accommodation during any stage of the application or hiring process, please let us know. We're happy to explore how we can support your access and success. Powered by JazzHR gDEH9qeriw

Job DescriptionDescription: RETTEW is seeking a Transportation Engineer 3 to join our growing Transportation Team. In this role, you will take on increasingly complex roadway and traffic design projects while contributing to solutions that improve how people and goods move through our communities. RETTEW is a 100% employee-owned engineering consulting firm delivering multidisciplinary solutions across transportation, energy, water and wastewater, environmental, and land development. We bring our clients’ goals to life through technical expertise, strong relationships, and a commitment to quality. Guided by our core values, Act Like an Owner, Value Relationships, and Exemplify Excellence, we invest in our people and the communities we serve. Work Environment: Hybrid Locations: Pittsburgh, PA; Akron, OH; or Morgantown, WV Position Summary: As a Transportation Engineer 3, you will perform and support moderately complex engineering design tasks, contribute to project delivery, and collaborate with multidisciplinary teams. You will apply sound engineering judgment, support project coordination, and begin guiding junior staff while continuing to grow technically and professionally. Responsibilities: • Develop roadway, traffic, and transportation design plans using engineering software and CAD tools, • Prepare portions of plans, specifications, reports, and permit applications, • Conduct field investigations and support construction observation activities, • Analyze data and apply engineering principles to develop practical design solutions, • Collaborate with project managers on schedules, budgets, and deliverables, • Support proposal development and assist with scopes of work, • Coordinate with internal teams, clients, and stakeholders on project tasks, • Provide guidance to junior staff and contribute to team development Qualifications: Required: • Bachelor’s degree in Civil Engineering or related field, • Minimum 4+ years of relevant experience, including internships, • Strong understanding of transportation or roadway design principles, • Experience with design software such as MicroStation, OpenRoads, or AutoCAD, • Ability to manage tasks, meet deadlines, and work within project budgets, • Strong communication and collaboration skills Preferred: • Engineer-in-Training (EIT) certification, • Experience with PennDOT, municipal, or state transportation projects, • Progression toward Professional Engineer (PE) license, • Experience mentoring or supporting junior staff What We Offer: • Competitive salary based on experience. RETTEW offers an Employee Stock Ownership Plan (ESOP), giving you a real stake in the company’s success and long-term value., • Comprehensive benefits including medical, dental, vision, and retirement savings options., • Opportunities to grow your career through hands-on project experience, exposure to a variety of transportation projects, and collaboration with experienced engineers and project managers., • Support from our in-house training and development team, offering structured professional development, mentorship, and continuously evolving resources designed to help you build expertise and grow your career., • A flexible, hybrid work environment that supports both productivity and work-life balance., • A culture where your work is visible and valued, you are trusted with real responsibility, and your contributions directly impact project outcomes and client success., • A collaborative, team-oriented environment where you can continue building technical skills without being siloed. RETTEW is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, veteran status, genetic information, or any other characteristic protected by applicable law. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, please contact us at jperalta@rettew.com to request assistance. #LI-Hybrid Requirements: Requirements listed above.

Job DescriptionAt KLH Engineers, our team of engineers, surveyors, and drafters, works on projects that ensure safe drinking water gets where it needs to go, wastewater is properly treated, and stormwater stays under control. Since 1982, we’ve partnered with numerous municipal clients across Pennsylvania, delivering top-notch services in water, wastewater, stormwater, and general municipal engineering. We bring creativity, technical excellence, and practicality to every project, ensuring our engineering solutions not only work but also make life a little easier for everyone. We’re currently looking for an Electrical Engineer Manager to join our growing team in our Pittsburgh office. If you enjoy solving complex infrastructure challenges, working on meaningful projects, and collaborating with a team that values technical excellence and practical problem-solving, you’ll fit right in.What You’ll Do: • Lead the design and development of electrical power distribution and process control systems for municipal and industrial water and wastewater treatment facilities., • Design and specify systems related to pumps, blowers, variable frequency drives (VFDs), SCADA systems, and process control instrumentation., • Develop detailed electrical engineering designs, construction documents, and technical specifications for water and wastewater infrastructure projects., • Conduct field investigations to evaluate existing conditions and gather critical information related to proposed system upgrades and improvements., • Assist clients with troubleshooting electrical and operational issues within existing treatment and pumping systems., • Provide startup, commissioning, and operational support for newly installed electrical and control systems., • Collaborate with multidisciplinary engineering teams to develop efficient, reliable, and maintainable solutions for complex infrastructure projects., • Coordinate with clients, contractors, vendors, and internal project teams to ensure projects move forward smoothly and successfully., • Apply sound engineering judgment to solve technical challenges and support critical infrastructure systems that communities depend on every day. Who You Are:, • You hold a Bachelor of Science degree in Electrical Engineering or a related field., • You have at least 5 years of experience in the detailed design of electrical power distribution and process control systems for municipal and/or industrial water and wastewater treatment facilities., • You have hands-on experience with pumps, blowers, VFDs, SCADA systems, and process control instrumentation., • You’re comfortable working both in the office and in the field, whether that means investigating existing systems, troubleshooting operational issues, or supporting system startups., • You understand how to balance technical precision with practical, real-world application. Why KLH?, • We’ll give you the space to do what you do best—be an Engineer., • We’re big enough to tackle complex, high-impact projects in-house, but small enough that your ideas won’t get lost in the shuffle., • You’ll work alongside a smart, collaborative, and genuinely supportive team., • We offer a flexible work schedule and the ability to work from home when necessary., • We believe in investing in our people through mentorship, continued learning, and opportunities for growth. Powered by JazzHR flgg3IZaYx

Job DescriptionJob SummaryThe Engineer II is responsible for performing design and analysis work for liquid storage structures, specialty vessels, and foundations using sound engineering principles. Typical applications include LNG storage terminals, low temp storage such as Propane/Butane, Ammonia tanks and liquid hydrogen spheres, above ground storage tanks, spheres, vacuum chambers and clarifiers etc. This role works on individual tasks in a collaborative team of engineers and designers to directly support various field and fabrication offices.Essential Functions • Actively supports the Company’s commitment to safety and its “Core Values.”, • Represents the Company at all times with high moral standards while adhering to the Company’s “Code of Business Conduct and Ethics.”, • Perform engineering design and calculations work for structures in liquid storage terminals for steel and concrete structures and their appurtenances., • Perform engineering design calculations for shallow and deep foundations including pile design, soil-structure interaction, and site-specific seismic analysis as required., • Perform analysis work including linear/nonlinear structural loading, vibration, seismic response spectrum analysis, thermal loading, and other analysis as required for LNG storage tanks and other cryogenic/refrigerated structures., • Prepares portions of project documents, edits specifications, develops design sketches, etc., • Evaluates, selects and applies standard techniques, procedures and criteria to perform a task or sequence of tasks for conventional projects with few complex features., • Work on special projects assigned and directed by supervisor or other Engineers., • Performs other related duties, as directedQualifications, • BS in Civil (Structural)/Mechanical Engineering required; MS degree preferred; PhD highly preferred., • Engineer-In-Training (EIT) preferred, • 2+ years related engineering experience is required or equivalent educational experience., • Advanced knowledge of strength of materials, mechanics, and structural analysis. Finite Element Analysis (FEA) experience is preferred., • Experience in design of steel and concrete structures is preferred, • Working knowledge of MathCAD, AutoCAD, STAAD, and ANSYS is preferred., • Knowledge of numerical methods of structural analysis preferred., • Design experience in API-620, API-650, API-653, ASCE, ACI, NFPA and ASME Section VIII is strongly preferred., • Cooperates with other team members; interacts with individuals at all organizational levels in professional manner., • Maintains a sense of urgency and a positive attitude., • Exhibits excellent listening, oral and written skills., • Demonstrates strong organizational skills and ability to work on multiple tasks simultaneously under time sensitive deadlines., • Strong PC skills including MS Office Suite (Excel, PowerPoint, Outlook, etc.), • Occasional overtime and travel may be required Follow us at Matrix PDM Engineering and Matrix Service Company to view all of our open positions and for the latest news about our operating companies and our teams. Full-time employees are offered a comprehensive benefits package, including medical, dental and vision plans covering eligible employees and dependents, disability benefits, life and AD&D insurance, paid time off, an employee assistance program (EAP), a 401(k) plan with company match, an employee stock purchase plan (ESPP), a robust wellness program, tuition reimbursement and adoption assistance. Some employees may also be eligible for a performance or safety bonus program. At Matrix, we are dedicated to building a diverse, inclusive, and authentic workplace. We encourage all whose experience aligns with the listed qualifications to apply and explore joining our organization. EEO/M/F/Disability/Vets Employer We are an Equal Opportunity. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category. Applicants must be currently authorized to work in the United States on a full-time basis.

Job Description Technical Sales- Process Engineer Aluminum Job Description At SMS group Inc., the Technical Sales / Process Engineer – Aluminum is responsible for technical support of operations and sales for Aluminum mills. The Technical Sales / Process Engineer has direct contact with customers, SMS group site team, R&D, engineering, sales, service, and service centers. The Technical Sales / Process Engineer needs to have an entrepreneurial mindset, focusing on technical support, troubleshooting, enhancement and improvements. Who we are At SMS group, our people are our greatest asset. We offer an entrepreneurial environment that promotes a culture of innovation, growth, and inclusion. We offer company events, activities, and opportunities to participate in charitable initiatives that benefit the communities where we are located. SMS group What you'll do • Responsible for market strategy, business planning, and sales in North America for Aluminum mill solutions, • Directly contacts customers with the assistance of SMS group Inc. sales and service personnel if required, • Technical presentation of papers at customers and marketing events to generate opportunities and market awareness, • Creates an open dialog with customers to seek out current issues & develop solutions utilizing SMS Group’s global technical resources, • Obtains RFQ’s and generates opportunities from customers and presents them to SMS group Inc. internal resources to be processed and assists in preparing the final technical and commercial proposal to the customer, • Technical and commercial presentation of proposals to perspective customers, • Participate in scope and project clarification meetings at perspective customers, • Provide regular status updates for all sales opportunities, • Onsite assessment of Aluminum Mill Equipment, • Technical interface with customers to assist in any operational and process questions that arise, • Onsite installation and supervision of Aluminum Mill Equipment What you'll need • Engineering degree and a minimum of 5 years’ experience in Aluminum, • Commissioning & field service experience is a plus, • Operational experience is also a plus, • Strong background in Aluminum mill equipment commissioning and operations, • Mill engineering or process experience a plus, • Multi-disciplined aptitude with the ability to interpret mechanical, fluid, and electrical drawings and schematics, • Ability to work with multiple departments and in a diverse team-based environment within the SMS group, • Strong confidence to communicate with customers, onsite subcontractors, and internal teams frequently, • High self-motivation to be proactive with ideas and problem-solving skills to serve the customer with minimum direction, • Commercial and cost estimation understanding, • Sound knowledge of MS Office, • Domestic travel and limited international travel required What we offer Competitive compensation, medical/dental/vision coverage, paid vacation, paid holiday time, 401k with a company match, training, a tuition reimbursement program and more! What we do SMS group is the leading partner in the world of metals. We are an original equipment supplier offering comprehensive maintenance and spare part services for metals production, continuous casting and rolling (flat and long products), tubes, welded pipes, forging, non-ferrous technology, and heat treatment plants - all from a single source. SMS group Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, religion, national origin, age, sexual orientation, disability, veteran status, gender identity or other categories protected by law. Employment is contingent upon successful completion of a drug screen and physical capacity profile test

Job DescriptionAt KLH Engineers, our team of engineers, surveyors, and drafters, works on projects that ensure safe drinking water gets where it needs to go, wastewater is properly treated, and stormwater stays under control. Since 1982, we’ve partnered with numerous municipal clients across Pennsylvania, delivering top-notch services in water, wastewater, stormwater, and general municipal engineering. We bring creativity, technical excellence, and practicality to every project, ensuring our engineering solutions not only work but also make life a little easier for everyone. We’re currently looking for a Senior Civil Stormwater Engineer to join our growing team in our Pittsburgh office. If you enjoy solving complex infrastructure challenges, developing practical stormwater solutions, and collaborating with a team that values technical excellence and real-world problem-solving, you’ll fit right in.What You’ll Do • Lead the design, development, and review of stormwater management systems for municipal, commercial, and land development projects., • Prepare and oversee site grading, drainage, and stormwater management designs that balance regulatory compliance with practical constructability., • Manage stormwater permitting efforts and coordinate with local, state, and regulatory agencies throughout the approval process., • Develop hydrologic and hydraulic analyses to support stormwater infrastructure design and watershed management solutions., • Prepare construction drawings, technical reports, calculations, and supporting documentation for stormwater and site development projects., • Conduct field investigations and site evaluations to assess existing drainage conditions and support project design development., • Collaborate with multidisciplinary teams, clients, municipalities, and regulatory agencies to deliver successful project outcomes., • Mentor junior engineering staff and provide technical guidance throughout project development and execution., • Apply sound engineering judgment to solve complex stormwater and drainage challenges while delivering practical, cost-effective solutions. Who You Are, • You hold a Bachelor of Science degree in Civil Engineering, Environmental Engineering, or a related field., • You have 10+ years of experience in stormwater engineering, site grading, and drainage design., • You have strong experience with stormwater management design and permitting processes., • You hold a Pennsylvania Professional Engineer (PE) license., • You have experience preparing hydrologic and hydraulic calculations and developing stormwater management solutions for a variety of project types., • You understand the technical and regulatory aspects of stormwater permitting, MS4 programs, and land development requirements. Why KLH? • We’ll give you the space to do what you do best—be an engineer. You won’t be expected to act as a salesperson, and we’re not hung up on accounting metrics or KPIs., • We’re big enough to tackle complex, high-impact projects in-house, but small enough that your ideas won’t get lost in the shuffle., • You’ll work alongside a smart, collaborative, and genuinely supportive team., • We offer a flexible work schedule., • You’ll have the opportunity to see projects from concept to construction and start-up, and won’t be pigeonholed into doing the same task day after day., • We believe in investing in our people through mentorship, continued learning, and opportunities for growth. If you're ready to take the next step in your career and join our top-notch team, one that values your contributions, supports your growth, and offers meaningful project work, we’d love to hear from you. Apply today to discover how your skills and experience can make a real impact at KLH and with the clients we proudly serve. Powered by JazzHR 3r75v0SWNj

Job Description Job Summary The Civil Senior Engineer I must possess a strong technical background and sound engineering judgement which will be applied in the development of deliverables for industrial site development projects. Essential Functions • Actively supports the Company’s commitment to safety and its “Core Values”., • Represents the Company at all times with high moral standards while adhering to the Company’s “Code of Business Conduct and Ethics”., • Works collaboratively in a team environment., • Develops design concepts, prepares calculations, writes specifications, and issues construction drawings, • Interfaces with permitting agencies, rail operators, utility companies and/or municipalities providing utility services, etc., • Functions as Lead Engineer, supervising designers and other engineering staff, interfacing directly with project personnel and clients, and monitoring budgets and schedules., • Functions as engineer-of-record for civil/site project scope., • Prepares written scopes of work documents and coordinates efforts of topographic/ hydrographic survey and geotechnical subconsultants., • Prepares written technical reports., • Assists in preparation of proposals., • Performs other related duties, as directed., • Occasional overtime and travel may be required. Qualifications, • BS in Civil Engineering., • Professional Engineer (PE) licensure., • 6+ years related engineering experience., • Strong written and verbal communication skills., • Strong organizational skills and ability to work on multiple tasks simultaneously under time sensitive deadlines., • Detail oriented, committed to quality., • Experienced in industrial and/or commercial site development, roads/streets/highways, storm drainage collection and retention/detention systems, potable water distribution systems, sanitary sewer collection and pumping systems, site grading, earthwork, etc., • Experienced in rail layout/design and rail operator industrial track standards/requirements and approval processes/procedures., • General understanding of local/state/federal regulatory agency permitting requirements and processes/procedures., • Proficient in common civil engineering and Microsoft software packages (HEC, Civil 3D, AutoCAD, EXCEL, WORD, e.g.), • Experience in bulk material handling and liquid terminal facilities is a plus. Follow us at Matrix PDM Engineering and Matrix Service Company to view all of our open positions and for the latest news about our operating companies and our teams. Full-time employees are offered a comprehensive benefits package, including medical, dental and vision plans covering eligible employees and dependents, disability benefits, life and AD&D insurance, paid time off, an employee assistance program (EAP), a 401(k) plan with company match, an employee stock purchase plan (ESPP), a robust wellness program, tuition reimbursement and adoption assistance. Some employees may also be eligible for a performance or safety bonus program. At Matrix, we are dedicated to building a diverse, inclusive, and authentic workplace. We encourage all whose experience aligns with the listed qualifications to apply and explore joining our organization. EEO/M/F/Disability/Vets Employer We are an Equal Opportunity. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category. Applicants must be currently authorized to work in the United States on a full-time basis.

Job Description Challenging Projects. Trusted Autonomy. An Exceptional Work Environment. Our client is seeking a Civil Engineer who wants meaningful work, professional trust, and a workplace designed for engineers who care about quality. This role is ideal for a P.E. with strong civil fundamentals, solid design experience, and a desire to work on varied, non-repetitive projects in a collaborative environment. What You’ll Be Doing • Planning, designing, and delivering civil engineering projects from planning through construction, • Applying sound engineering judgment to develop practical, buildable solutions, • Managing scopes, schedules, budgets, and proposals with accountability and clarity, • Coordinating permitting and regulatory approvals, • Supporting construction through RFIs, submittals, and construction administration, • Working directly with clients and collaborating across disciplines, • Using AutoCAD and modern project management tools in a nimble environment What We’re Looking For • Professional civil engineering experience – A P.E. or E.I.T with experience in civil design, permitting, and construction coordination, • Proficiency with AutoCAD, • Working knowledge of Word and Excel, • Strong communication skills and a collaborative mindset Why Engineers Choose This Firm Leadership that trusts engineers and avoids micromanagement. Curiosity encouraged & questions and new ideas are welcome. A founder highly respected in the industry and actively engaged in the community. Support for professional development and career growth aligned to your ambitions. A diverse, highly capable team. A distinctive office environment: rustic, industrial, tech-forward, and designed for engineers. This is a strong fit for a Civil Engineer seeking challenge, autonomy, and a workplace that genuinely values its people. Company DescriptionCareerPro Inc. is a high quality executive recruitment, leadership development, career services and outplacement firm.CareerPro Inc. is a high quality executive recruitment, leadership development, career services and outplacement firm.

Job Description Ranked the #4 Large Employer to Work for in America and residing in the Top 400 on Engineering News Record (ENR)'s List of Top Design Firms in the nation, TPD is currently hiring an experienced structural engineer to assist with structural reviews for locally sponsored projects which could include the following structures - bridge, culverts and retaining walls. The selected candidate would also be incorporated into structural design activities. Our ideal candidate will have a minimum of 8 years of experience, a strong work ethic, a desire to learn, the willingness to work cohesively within a team, and the ability to work on multiple projects. Additionally, we offer a creative, flexible, supportive and fun environment! Duties and Responsibilities include, but are not limited to: • Review of structure submissions from project concept through project letting., • Provide support to the client as a subject matter expert in structural engineering, providing technical guidance., • Preparation of design computations, quantity estimates, and construction cost estimates., • Specific tasks may include superstructure design, substructure design, foundation design, geometric layout, drawing preparation/checking, structural analysis, design of other transportation related structures (retaining walls, sound walls, sign structures), performing QC checking, etc., • Assisting in the analysis of field data, reports, maps, drawings, tests, and aerial photographs to plan and design projects., • Obtaining, analyzing, and interpreting data., • Assisting in the preparation or modification of reports, specifications, plans, construction schedules, and designs for projects., • Use of computer assisted engineering and design software and equipment to prepare engineering and design documents., • Assisting with business development activities by performing project research and performing field reconnaissance. Job Requirements • Bachelor’s Degree in Civil Engineering, • PA PE preferred, • PennDOT (including PA counties) design experience preferred, • Prior oversight of design teams for County or State bridge projects, • Experience using CADD Software (MicroStation and/or AutoCAD), • Excellent oral and written communication skills, • Strong work ethic and ability to work on multiple projects and ability to meet multiple deadlines, • Knowledge of Microsoft Office Suite, • Valid Driver’s License Don't meet every qualification or skill in the description? That's ok! We are fully committed to expanding our staff and culture to best serve our clients and our communities. If you are interested in this position but don't completely align with every qualification listed, we encourage you to apply. You may be what we are looking for, for this role or maybe for another open position. At TPD we exist to improve the quality of life for the public, and are dedicated to Moving Forward Together®

Working at the Naval Nuclear Laboratory we foster pride in belonging to an organization whose culture is made up of these core values: Trust, Empowerment, and Collaboration. Our company promotes a positive culture while ensuring the safety and reliability of our nation's naval nuclear reactors, and training the Sailors who operate those reactors in the U.S. Navy's submarines and aircraft carrier Fleets. Looking for a lifetime career? Apply today! The Propulsion Plant Team Trainer (PPTT) Programs & Engineering (PPE) subdivision is a multi-site organization engaged in the design, fabrication, assembly, installation, testing, and delivery of the PPTT, a full-scale propulsion plant hardware simulator, to support the Next Generation Training Program (NGTP). PPE engineers are responsible for: PPTT components and modules, the interactive portion of the simulated environment, which will be integrated into the overall trainer; electrical and systems engineering of the trainer and supporting infrastructure; PPTT Integration, the holistic physical training envelope and supporting structure and interconnections; and project management of all related work efforts. An exciting opportunity is now available for entry-level electrical engineers to support these ongoing efforts; this work consists of electrical and systems engineering, development, and testing of the PPTT and its supporting system and testing facilities. This posting is open to engineers willing to work at either the Bettis Site (PA) or the Kesselring Site (NY). The successful candidate for this position will: • Plan and conduct independent work efforts throughout the project lifecycle, • Interface with stakeholders to ensure project objectives are being met, • Perform electrical design reviews and technical interchanges with Suppliers as well as internal NNL stakeholders, • Support on-site hardware inspections and testing of production equipment at Supplier facilities and remote NNL sites, • Design, procure, install, test, and maintain the PPTT Test Platform, including PLC based distributed I/O systems and related network architecture, sound and communication systems, and electrical power control systems. Bachelors degree from an accredited college or university in a related technical, engineering or science field and a minimum of 4 years of relevant experience; or Masters degree from an accredited college or university in a related technical, engineering or science field and a minimum of 2 years of relevant experience; or Doctorate degree from an accredited college or university in a related technical, engineering, science field; or Currently an Advanced Reactor Training Engineer, Refueling Engineer, or Field (RPCO) Engineer at the Company. • Experience with SolidWorks Electrical or equivalent CAD software, • Experience with Programmable Logic Controllers, • Experience with Distributed and Remote I/O systems, • Experience evaluating, and creating, electrical designs based on approved technical requirements, • Strong communication and collaboration skills, • Ability to think creatively and make recommendations to senior project personnel, • Ability to work independently or in a group setting, • Proficiency in Microsoft Office products, • Health, Dental, Vision & Voluntary Benefits, • Disability, Life & Accident Insurance, • 401(k) Savings program & Capital Accumulation Plan, • Personal & Medical Time Off, • Paid Parental Leave, • Flexible Work Schedules, • Tuition Assistance for Eligible Employees, • Student Debt Benefit Personal Time Off Sell Program, • Employee Assistance Program (EAP), • Wellness Program, • Visit us online to view all NNL benefits! $85,200.00 - $133,200.00 annually Salary information provided is a general guideline only. Annual salary is based upon candidate experience and qualifications, as well as market and business considerations. The Naval Nuclear Laboratory is operated for the U.S. Department of Energy (DOE) by Fluor Marine Propulsion, LLC (FMP), a wholly owned subsidiary of Fluor Corporation. Naval Nuclear Laboratory personnel are FMP employees who work at four DOE facilities: Bettis Atomic Power Laboratory, Knolls Atomic Power Laboratory, Kenneth A. Kesselring Site, and Naval Reactors Facility, and at the U.S. Department of Defense-owned Nuclear Power Training Unit-Charleston. FMP employees also have an established presence at numerous shipyards and vendor locations. For nearly 70 years, the Naval Nuclear Laboratory has developed advanced nuclear propulsion technology, provided technical support, and trained world-class nuclear operators to ensure the safe and reliable operation of our nation's submarine and aircraft carrier Fleets. The Naval Nuclear Laboratory is a national asset solely dedicated to the Naval Nuclear Propulsion Program. We rely on the dedication and innovation of our nearly 8000 engineers, scientists, technicians, and support personnel. All candidates must be U.S. citizens. Applicants selected will be subject to a Federal background investigation and must meet eligibility requirements for access to classified matter. FMP is a government contractor and maintains a drug free workplace and workforce. All candidates must be able to pass a drug test in compliance with FMP company policy and 10 CFR 707. Marijuana is a Federal Schedule I controlled substance and illegal under Federal Law. Therefore, FMP is required to test for marijuana. Fluor Marine Propulsion, LLC is an Equal Opportunity Employer, including disability/vets. All qualified applicants will receive consideration for employment without regard to race, color, age, sex, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by federal, state, or local law. _ Back to results

Working at the Naval Nuclear Laboratory we foster pride in belonging to an organization whose culture is made up of these core values: Trust, Empowerment, and Collaboration. Our company promotes a positive culture while ensuring the safety and reliability of our nation's naval nuclear reactors, and training the Sailors who operate those reactors in the U.S. Navy's submarines and aircraft carrier Fleets. Looking for a lifetime career? Apply today! Are you seeking a position with autonomy, significant responsibility, and a career broadening hands-on experience with naval nuclear reactors and the naval ships in which they reside? NNL maintains field offices in shipyards that conduct Naval Nuclear Propulsion Program work. This includes shipyards in Hampton Roads VA, Portsmouth ME, Groton CT, Honolulu HI, Bremerton WA and several others. RPCO engineers are the on-site representatives of NNL and component supply organizations in these shipyards. The selected candidate will provide engineering support and independent oversight of work associated with installation, reactor servicing, testing, and modification of reactor plant systems, components, and safety systems. RPCO engineers are engaged during nuclear work and operations and are expected to apply sound engineering principles and judgement to influence and provide feedback to on-site management and partner organizations. RPCO engineers routinely work on the deckplates of nuclear powered assets and are relied upon to make key observations and decisions on the safe operations of these assets. This position offers candidates an approximate 1-2 year assignment at the Knolls (NY) or Bettis (PA) Laboratory prior to transferring into NNL's Field Engineering Program for a 3-5 year assignment in a Shipyard. The Laboratory assignment is intended to give the candidate experience in NNL's fleet support engineering community; this includes providing reactor plant engineering support (problem resolution and improvement initiatives) for aircraft carrier and submarine platforms throughout the life cycle of the ships (e.g., new construction, reactor servicing, maintenance availabilities, and emergent problem resolution). Candidates would be expected to relocate to the Knolls or Bettis Laboratory for 1-2 years before commencing training and subsequent relocation to a shipyard. Successful completion of a job-specific qualification is required for this position. Training associated with this qualification is expected to take approximately one year depending on previous experience and will be conducted at the Knolls or Bettis Laboratory. At the conclusion of qualification, the prospective RPCO engineer will be expected to demonstrate both an adequate understanding of requirements and the ability to function in a field location in a technical support and oversight capacity. Bachelors degree from an accredited college or university in a related engineering or science field; or Masters degree from an accredited college or university in a related engineering or science field. • Min GPA of 3.5, • BS in Chemical Engineering, Nuclear Engineering, or Physics, • Strong leadership and mentoring ability., • Eagerness to learn and adapt to varying tasks and responsibilities., • Strong written and verbal communication skills., • Ability to work independently while also supporting team goals, • Ability to work in an industrial environment, • Ability to learn and apply multiple engineering disciplines to complex problems, • Health, Dental, Vision & Voluntary Benefits, • Disability, Life & Accident Insurance, • 401(k) Savings program & Capital Accumulation Plan, • Personal & Medical Time Off, • Paid Parental Leave, • Flexible Work Schedules, • Tuition Assistance for Eligible Employees, • Student Debt Benefit Personal Time Off Sell Program, • Employee Assistance Program (EAP), • Wellness Program, • Visit us online to view all NNL benefits! $63,300.00 - $96,900.00 annually Salary information provided is a general guideline only. Annual salary is based upon candidate experience and qualifications, as well as market and business considerations. The Naval Nuclear Laboratory is operated for the U.S. Department of Energy (DOE) by Fluor Marine Propulsion, LLC (FMP), a wholly owned subsidiary of Fluor Corporation. Naval Nuclear Laboratory personnel are FMP employees who work at four DOE facilities: Bettis Atomic Power Laboratory, Knolls Atomic Power Laboratory, Kenneth A. Kesselring Site, and Naval Reactors Facility, and at the U.S. Department of Defense-owned Nuclear Power Training Unit-Charleston. FMP employees also have an established presence at numerous shipyards and vendor locations. For nearly 70 years, the Naval Nuclear Laboratory has developed advanced nuclear propulsion technology, provided technical support, and trained world-class nuclear operators to ensure the safe and reliable operation of our nation's submarine and aircraft carrier Fleets. The Naval Nuclear Laboratory is a national asset solely dedicated to the Naval Nuclear Propulsion Program. We rely on the dedication and innovation of our nearly 8000 engineers, scientists, technicians, and support personnel. All candidates must be U.S. citizens. Applicants selected will be subject to a Federal background investigation and must meet eligibility requirements for access to classified matter. FMP is a government contractor and maintains a drug free workplace and workforce. All candidates must be able to pass a drug test in compliance with FMP company policy and 10 CFR 707. Marijuana is a Federal Schedule I controlled substance and illegal under Federal Law. Therefore, FMP is required to test for marijuana. Fluor Marine Propulsion, LLC is an Equal Opportunity Employer, including disability/vets. All qualified applicants will receive consideration for employment without regard to race, color, age, sex, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by federal, state, or local law. _ Back to results

Job Description The Environmental Controls organization is the Laboratory's subject matter experts in the radiological environmental monitoring program. The monitoring program is required by Federal, State, and local environmental regulations and/or NAVSEA direction. Efforts include performance of radiological dose assessments for normal and accident conditions; issuing reports to regulatory agencies as necessary; monitor, review and interpret environmental requirements; assess and enforce compliance; and, provide technical and analytical consultation to Bettis, other Naval Nuclear Propulsion Program (Program) facilities, and NAVSEA including Navy and/or Naval shipyards. Individual is responsible for the development and/or follow of programs or projects to ensure compliance with operational, design, regulatory and Program requirements and may perform work document reviews, engineering evaluations, analyses or assessments to support assigned tasks. Identifies process enhancements to routine and special personnel monitoring, environmental and area monitoring and radiological assessments. Provides subject matter expertise in regulated areas such as radiological controls, quality assurance, and emergency planning to personnel to support safe and compliant execution of work activities. Work may include providing interface, independent oversight and assessment of Bettis, Subcontractor, and DOE-EM operations, material evaluations, design reviews, development of engineering methods, major site system and facility operations. Preparation and maintenance of records and reports to meet regulatory and Program requirements, evaluate and assess site performance, perform surveillance, clarify and implement regulatory requirements, prepare, review and approve technical work procedures and identify improvements to existing processes. May lead or provide support for inspections and interface with outside regulatory agencies. Specific responsibilities may include: • Ensure compliance with regulations, e.g., EPA radionuclide NESHAPS regulations 40CFR61 Subpart H and applicable DOE Orders. • Apply knowledge of applicable federal and state environmental laws/regulations to provide interpretations/guidance as well as oversight. • Conduct technical evaluations in areas of environmental radiation dosimetry, radiological dose assessments, and monitoring procedures and equipment. • Execute the Site's' radiological monitoring program, including field work for sampling, analysis and evaluation of streams and outfalls, vegetation, sediment, environmental air and radiation, groundwater and monitoring radiological stack effluents. • Conduct technical evaluations for radiological environmental sampling, analysis, and dose evaluations in support of emergency response operations as well as maintain applicable dose evaluation programs. • Support audits and surveillance. Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in a related technical, engineering or science related field and a minimum of 9 years of relevant experience; or Bachelors degree from an accredited college or university in a technical, engineering or science field and a minimum of 6 years of relevant experience with certification as a health physicist by the American Board of Health Physics; or Masters degree from an accredited college or university in a related technical, engineering or science field and a minimum of 7 years of relevant experience; or Masters degree from an accredited college or university in a related technical, engineering or science field and a minimum of 4 years of relevant experience with certification as a health physicist by the American Board of Health Physics; or Doctorate degree from an accredited college or university in a related technical, engineering or science field and a minimum of 3 years of relevant experience; or Doctorate degree from an accredited college or university in a related technical, engineering or science field with certification as a health physicist by the American Board of Health Physics. Preferred Skills Certified Health Physicist or passed part 1 Certified Health Physicist exam. Prior Naval Nuclear Propulsion Program experience. Prior radiological environmental monitoring experience and/or engineer of radiological work. Performance of radiological dose assessment calculations. Working knowledge of federal legislative/regulatory policies and the underlying environmental laws. Ability to review regulations and guidance material, and compile technically sound written papers, positions, reports, and implementation strategies. Experience interfacing with outside regulatory agencies (e.g., EPA, New York State Department of Environmental Conservation, etc.) Work experience in environmental engineering/compliance related fields. Demonstrated written and oral communication skills. Demonstrated project management experience. Experience with Microsoft Office especially proficiency with Excel. Experience with CAP88, Recent and Historical Versions Compensation and Benefits Health, Dental, Vision & Voluntary Benefits Disability, Life & Accident Insurance 401(k) Savings program & Capital Accumulation Plan Personal & Medical Time Off Paid Parental Leave Flexible Work Schedules Tuition Assistance for Eligible Employees Student Debt Benefit Personal Time Off Sell Program Employee Assistance Program (EAP) Wellness Program Visit us online to view all NNL benefits! Pay Range $117,900.00 - $184,300.00 annually Salary information provided is a general guideline only. Annual salary is based upon candidate experience and qualifications, as well as market and business considerations.

Working at the Naval Nuclear Laboratory we foster pride in belonging to an organization whose culture is made up of these core values: Trust, Empowerment, and Collaboration. Our company promotes a positive culture while ensuring the safety and reliability of our nation's naval nuclear reactors, and training the Sailors who operate those reactors in the U.S. Navy's submarines and aircraft carrier Fleets. Looking for a lifetime career? Apply today! Job Description We are seeking a Project Engineer who brings a strong project management mindset, thrives on driving continuous improvement, and proactively supports evolving Laboratory needs. About the role: Leading end?to?end project execution – guiding project teams, fostering collaboration, and ensuring clarity, communication, and high?quality deliverables throughout all phases of work. Providing clear, timely communication to NRLFO, NR, and senior leadership regarding project progress, risks, and emerging issues to support informed decision?making. Championing innovation and improvement by originating new ideas that enhance Laboratory capabilities, strengthen functional requirements, and drive cost?effective solutions. Coordinating effectively with cross?functional partners including Operations & Maintenance, Construction, Environmental Safety & Health, Radiological, Waste Management, Security, and IT to ensure integrated project support. Managing project scope, schedule, and budget—making sound decisions, mitigating risks, and executing change management processes when challenges arise. Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in a related technical, engineering, science or construction field and a minimum of 4 years of relevant experience; or Masters degree from an accredited college or university in a related technical, engineering, science or construction field and a minimum of 2 years of relevant experience; or Doctorate degree from an accredited college or university in a related technical, engineering, science or construction field; or Currently an Advanced Reactor Training Engineer, Refueling Engineer, or Field (RPCO) Engineer at the Company. Preferred Skills Management of multiple projects and in project planning Management of Construction and/or Facilities projects Previous work with subcontractors Experience with regulators and/or compliance organizations Experience or training in problem identification and resolution, causal analysis, etc. Project planning tools (MS Project or Primavera) and resource loading, to include work breakdown structure (WBS) Strong communication skills and teaming abilities, and demonstrated process improvement abilities Demonstrated leadership Compensation and Benefits Health, Dental, Vision & Voluntary Benefits Disability, Life & Accident Insurance 401(k) Savings program & Capital Accumulation Plan Personal & Medical Time Off Paid Parental Leave Flexible Work Schedules Tuition Assistance for Eligible Employees Student Debt Benefit Personal Time Off Sell Program Employee Assistance Program (EAP) Wellness Program Visit us online to view all NNL benefits! Pay Range $78,700.00 - $120,500.00 annually Salary information provided is a general guideline only. Annual salary is based upon candidate experience and qualifications, as well as market and business considerations. The Naval Nuclear Laboratory is operated for the U.S. Department of Energy (DOE) by Fluor Marine Propulsion, LLC (FMP), a wholly owned subsidiary of Fluor Corporation. Naval Nuclear Laboratory personnel are FMP employees who work at four DOE facilities: Bettis Atomic Power Laboratory, Knolls Atomic Power Laboratory, Kenneth A. Kesselring Site, and Naval Reactors Facility, and at the U.S. Department of Defense-owned Nuclear Power Training Unit-Charleston. FMP employees also have an established presence at numerous shipyards and vendor locations. For nearly 70 years, the Naval Nuclear Laboratory has developed advanced nuclear propulsion technology, provided technical support, and trained world-class nuclear operators to ensure the safe and reliable operation of our nation's submarine and aircraft carrier Fleets. The Naval Nuclear Laboratory is a national asset solely dedicated to the Naval Nuclear Propulsion Program. We rely on the dedication and innovation of our nearly 8000 engineers, scientists, technicians, and support personnel. All candidates must be U.S. citizens. Applicants selected will be subject to a Federal background investigation and must meet eligibility requirements for access to classified matter. FMP is a government contractor and maintains a drug free workplace and workforce. All candidates must be able to pass a drug test in compliance with FMP company policy and 10 CFR 707. Marijuana is a Federal Schedule I controlled substance and illegal under Federal Law. Therefore, FMP is required to test for marijuana. Fluor Marine Propulsion, LLC is an Equal Opportunity Employer, including disability/vets. All qualified applicants will receive consideration for employment without regard to race, color, age, sex, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by federal, state, or local law.

GAI Consultants, Inc. (GAI) is seeking a Senior EIT 2 to work out of our Pennsylvania (Pittsburgh, Cranberry, or Canonsburg/Southpointe), West Virginia (Bridgeport or Charleston), or Virginia (Richmond or Warrenton) offices, with an option to work remotely while based out of one of those office locations. Under the direction of a Geotechnical Engineering Manager, this individual will provide geotechnical engineering and project site support for projects in the Energy, Transportation and Community Development business units. The position will require travel and fieldwork generally located in Pennsylvania, West Virginia, and Virginia. This position is eligible for a sign-on bonus. Essential Duties and Responsibilities: • Perform geotechnical engineering assignments involving investigations for a variety of facilities including, but not limited to: foundations for transmission lines, buildings, roadways, bridges, retaining walls, dams, and other structures; designs for embankments and cut slopes for roadways and other developments; designs for natural gas pipelines and compressor stations; design of waste landfills and impoundments; and development of geotechnical monitoring and laboratory testing programs. • Prepare geotechnical engineering designs involving: rock/soil slope stability; cut slope and fill embankment design; landslide stabilization and remediation (reinforcement with rock anchors/soil nails, GRS slopes); geotechnical field instrumentation; soil reinforcement and ground improvement techniques (CMCs, compaction grouting, stone columns); sheet pile/retaining walls (gravity walls, soldier pile, and lagging walls, MSE walls, T-walls); shallow and deep foundations (spread footings, driven piles, micropiles, drilled shafts). • Geotechnical Investigation and Construction Support Services including, but not limited to: test boring monitoring and logging; site reconnaissance; foundation and retaining structure construction monitoring and inspection. The successful candidate will be responsible for interpreting specifications and construction drawings, evaluating site conditions based on construction excavations, monitoring and reporting on construction activities, and performing field testing of soils. • Prepare proposals, budgets, schedules, calculations, specifications, and reports., • Travel can be expected in the form of fieldwork, which can be daily local travel or weekly out-of-town travel, generally located in the Pennsylvania, West Virginia, and Virginia areas (up to 50%). Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • The candidate can be expected to traverse steep terrain and carry up to 50 lbs. General Characteristics • Develops broad knowledge and skills in a specific practice area., • Evaluates, selects, and applies standard techniques, procedures, and criteria to perform a task or sequence of tasks for conventional projects with few complex features., • Collaboratively uses judgment to determine adaptations in methods for nonroutine aspects of assignments., • Applies principles of probability and statistics to determine risk relevant to engineering. Minimum Years of Experience • 6+ Education • B.S. or M.S. Engineering Certification/Licensure • Passed Fundamentals of Engineering (FE) exam and obtained engineer-in-training (EIT) or engineering-intern (EI) certification Technical Responsibilities • Performs moderate design tasks., • Prepares portions of plans, specifications, and other project documents., • Performs research and field investigation. Project and Task Management • Works as a part of a team and coordinates work with others., • Assists in determining schedule and budget requirements. Management Responsibility • Receives instruction on specific objectives., • Receives direction on unconventional and/or complex problems and possible solutions., • Receives a thorough review of completed work for the application of sound professional judgment., • Receives mentorship from a licensed engineer typically in their specialty. Communication Skills • Possess effective oral and written communication skills., • Interacts with other staff., • Interacts with clients with close oversight., • Interacts closely with Project Managers & various Department Managerial Staff, especially with client communications., • Interacts with clients at regular project meetings. EducationBachelors of Engineering (required) Experience6 years: Related experience working in an engineering role. (required) Licenses & CertificationsDriver's License (preferred) EI (required) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the _ notice from the Department of Labor.

GAI Consultants is seeking a Substation and/or Protection & Controls Engineer 3 for substation-related work. This position will perform substation and protection and controls design, technical guidance/training/mentoring of staff, design reviews, QA/QC review, and enforcement related to all aspects of protection & controls design services. The successful candidate will work on various substation and/or protection and control engineering projects including detailed design for high voltage substation projects through 500kV, with a focus on a "Client First" approach to all interactions. Job Duties: • Manage, design, and perform QA/QC checks related to technical activities including, but not limited to, the following:, • Development of and/or revisions to existing drawings for one-lines, physical arrangement, grounding, schematics and wiring, control and relaying panels and equipment wiring including coordinating with CAD operators to develop organized quality CAD drawings., • Integrate protection and control drawings to interface with the physical layout and design of substations., • Design of interfacing with SCADA systems and communications including RTUs, HMIs, and IEDs., • Development of control and relay panel layouts including assembling the specifications., • Creation of project criteria., • Development of design specifications including the overall bill of materials., • Design and sizing of auxiliary systems including AC/DC load centers as well as batteries and chargers., • Design and sizing of conduit, cable, and backup generators., • Ordering long-lead item materials., • Point to Point checks., • Review junior engineer's designs, verify they meet client standards and specifications, and identify gaps in client's protection., • Document QAQC reviews, maintain record documents, and communicate information to the team., • Traveling to other offices and meeting with clients and attending project-specific meetings on a regular basis., • Managing tasks on multiple projects in accordance with GAI's high standards of project management., • Managing and assisting with the development of the scope of services and cost estimates for Substation and P&C projects., • Ability to manage competing priorities using sound engineering and financial judgment to determine optimal solutions., • Must be flexible to handle shifting deadlines and scope changes., • Must have resource management skills and the ability to identify project barriers and mitigate them without schedule impacts., • Must be able to manage and prioritize multiple projects simultaneously and be able to work effectively under the pressure of deadlines and unexpected developments., • Ability to work extended hours or after hours when required. Physical Requirements • Ability to work indoors in professional office settings., • Ability to sit for extended periods while performing computer-based tasks., • Frequent use of hands and fingers for typing, writing, and handling office equipment., • Visual acuity to read printed materials, digital screens, detailed documents, and perform detailed work., • Occasional standing, walking, bending, or reaching within the office environment. Ability to move between workstations and attend in-person meetings., • Ability to lift and carry office materials or equipment weighing up to 10-20 pounds, with or without assistance., • Adequate hearing to participate in conversations, phone calls, and virtual meetings., • Ability to travel for meetings, training, or business purposes. Technical Responsibilities • Develops and reviews complete project documents for conformity and quality assurance., • Typically, in responsible charge of projects., • Keeps informed of updates to standards, regulations, and best practices., • Analyzes complex engineering projects to determine design requirements, uncertainties, and constraints., • Acknowledges and applies concepts of sustainability to engineering projects. Project and Task Management • Assigns tasks to and directs other technical and non-technical staff., • Plans and coordinates detailed aspects of the engineering work., • Prepares scopes, budgets, and schedules for assignments., • Assists with proposals to provide professional services or obtain funding for engineering projects or programs. General Characteristics • Independently applies extensive and diverse knowledge of principles and practices in broad areas of assignments and related fields., • Modifies or extends accepted theories and practices of engineering to complete assignments., • Acts in responsible charge of projects., • Leads tasks and projects of moderately complex scopes., • Develops plans, specifications, and other project documents., • Selects appropriate principles of engineering economics, and probability and statistics to analyze risk in a complex engineering problem. Communication, Teamwork and Leadership • Possesses advanced oral and written communication skills, including interpretation of complex technical and contractual language., • Considers the needs of diverse project stakeholders., • Leads project meetings and represents the organization in communications pertaining to broad aspects of engineering assignments., • Analyzes and selects principles of formal communication, effective teamwork, and various pathways to developing leadership., • Sustains a diverse and inclusive team culture. Management, Supervision and Guidance • Receives supervision and guidance relating to overall objectives, critical issues, new concepts, and policy matters., • Receives direction on unusual conditions and developments., • Provides mentored experience to direct reports and other engineers., • Demonstrates professional attitudes relevant to the practice of engineering, including creativity, curiosity, flexibility, and dependability. Education • B.S. Engineering Certification/Licensure • Professional Engineer (P.E.) License, reciprocity in multiple states. Experience • 8+ Why GAI? GAI offers skilled professionals like you an exceptional place to work, grow, lead, and achieve. Explore anarray of opportunities in locations across the U.S. and join accomplished colleagues in tackling challenging projects for a range of markets. Enjoy work location and scheduling flexibility; your choice of comprehensive, personalized benefits; a range of employee wellness programs and discounts; and more. Feel good about being part of a collaborative teamthat'scommitted to supporting the communities we serve. Join GAI and distinguish yourself in a company poised for unlimited growth. Benefits To Working at GAI Include: Competitive Pay & Recognition • Marketbased, competitive compensation, • Performancedriven recognition and development bonuses Comprehensive Health & Wellness • Medical, dental, and vision plans, • Companypaid short-term and long-term disability, • Companypaid life insurance, • Employee Assistance Program and wellness resources Meaningful Work-Life Balance • Generous paid time off + 7 paid holidays, • Anadditionalfloating holiday-use it for what matters to you, • Paid maternity, paternity, and adoption leave Growth, Learning & Financial Security • 401(k) with company match, • Tuition reimbursement, • Support and rewards for professional development and certifications EducationBachelors of Engineering (required) ExperienceProficient in the use of AutoCAD and/or Microstation (preferred) Experience developing relay settings (preferred) Licenses & CertificationsProfessional Engineer (required) Driver's License (required) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the _ notice from the Department of Labor.

GAI Consultants is seeking a Relay Settings Engineer (EIT 2) with protective relay experience for transmission and distribution systems. The successful candidate will work on various substation and/or protection and control engineering project including detailed design for high voltage substation projects through 500kV, with a focus on "Client First" approach to all interactions. We value work-life balance and offer flexibility - this position can be performed in a hybrid or fully remote capacity. Job Duties: • Development of Protective Relay Settings for microprocessor relays including: SEL, GE, ABB and others. For both transmission line relays (line differential, Step distance and Pilot Schemes) and Substation relays (Capacitor Banks, Transformers and Buses), • Conduct short circuit analysis and relay coordination studies using Aspen OneLiner and/or PSS CAPE., • Utilize SEL AcSELerator Quickset and GE EnerVista software, • Implementation of control and protection schemes including interpreting schematics and wiring diagrams and preparing relay logic to complete the schemes., • Mentoring and managing staff at all levels., • Managing tasks on multiple projects in accordance with GAI's high standards of project management., • Ability to manage competing priorities using sound engineering and financial judgment to determine optimal solutions., • Must be flexible to handle shifting deadlines and scope changes., • Must have resource management skills and the ability to identify project barriers and mitigate them without schedule impacts. Travel: • 10% to job sites or client meetings as needed. General Characteristics • Acquires fundamental knowledge and develops skills in a specific practice area through mentored experience., • Applies standard techniques, procedures, and criteria to perform assigned tasks as part of a broader assignment. Minimum Years of Experience • 2+ Education • B.S. or M.S. Engineering Certification/Licensure • Passed Fundamentals of Engineering (FE) exam and obtained engineer-in-training (EIT) or engineering-intern (EI) certification. Technical Responsibilities • Performs basic design tasks., • Assists on tasks such as: field activities, material testing, CADD work, permit applications, and report writing. Project and Task Management • Responsible for personal task management and adherence to deadlines and scope., • No managerial responsibilities at this level. Management Responsibility • Receives close supervision on most aspects of assignments, particularly on difficult problems, and a general review of all aspects of work., • Receives mentorship from a licensed engineer. Communication Skills • Possesses basic oral and written communication skills., • Engages in few project stakeholder interactions. Why GAI? At GAI, exceptional people have an exceptional place to work, grow, lead, and achieve. Explore an array of opportunities in locations across the U.S. and join accomplished colleagues in tackling challenging projects for a range of markets. Enjoy comprehensive benefits and feel good about being part of a collaborative team that's committed to supporting the communities we serve. Join GAI and distinguish yourself in a company poised for unlimited growth. Benefits To Working at GAI Include: • Competitive salary -GAI is committed to paying market-based salaries, • Comprehensive benefits package including medical, vision, dental, company paid Long Term Disability, and Short-Term Disability (benefits start within 30 days of hire), • New paid Maternity/Paternity/Adoption program, • Generous Paid Time Off and 7 paid holidays, • 401k company match, • Tuition Reimbursement #INDHP EducationBachelors of Engineering (required) Experience2 years: Related Experience (required) Licenses & CertificationsEIT (required) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the _ notice from the Department of Labor.

GAI Consultants is looking for a technically diversified Civil/Environmental Senior Engineering Manager 1 to support our Power Generation Environmental Engineering Group working hybrid at one of our Western PA offices (Homestead or Cranberry). This candidate will be able to perform project planning, design, engineering, permitting, and engineering services for civil/site, water resources, and water and wastewater projects. Bring your talent to a range of stimulating projects alongside supportive and accomplished teammates-advance your career, fulfill your professional aspirations, and express your entrepreneurial spirit as an essential contributor to an established company. #INDHP Sound like a fit? We'd love the opportunity to get to know you! Essential Duties and Responsibilities: • Supervising entry to mid-experienced technical specialists and EITs, • Leading environmental compliance projects such as NPDES Permit regulation interpretation and permit strategy, in addition to sampling and discharge monitoring report preparation, • Managing multi-disciplinary projects and leading the design and technical direction for civil/site, water resources, and/or wastewater components on power generation facility projects., • Deliverables may include Civil/Site Development and Access Road Grading Plans, Erosion and Sedimentation Control Plans, Stormwater Management Plans, Utility Design, and Relocation Plans, Maintenance and Protection of Traffic Plans, Hydrology and Hydraulic Reports, Permit Application Packages (earth disturbance, land development, highway occupancy, water obstruction and encroachment, water quality, etc), and Construction Plans, Specifications, and Opinions of Probable Cost., • Water and wastewater engineering and design, which may include collection, conveyance, treatment, pumping, and storage systems., • Water Resource engineering and design, which may include hydrologic and hydraulic analyses, drainage systems, channels, and stormwater management systems., • Design of temporary and permanent Stormwater Best Management Practices (channels, culverts, infiltration, detention, and/or retention structures)., • The candidate will be responsible for maintaining the budget, schedule, and quality of Tasks and being up to speed on regulation changes and agency protocols and requirements., • The candidate will be responsible for the development of proposals, scopes of work, man-hour estimates, and work plans for engineering portions of work pursuits., • Domestic travel for periodic project site visits or client meetings (up to 10% of the time). Qualifications: • Bachelors (B.S.) degree from an accredited college in Environmental or Civil Engineering (M.S. degree a plus), • Professional Engineering License, • Project management experience (5+ years)., • Knowledge of applicable regulations., • Strong verbal and written communication skills., • Ability to work in a team environment and work independently as needed on project-specific tasks., • Ability to be efficient in planning and organizing workload., • Dedicated commitment to performing quality work with a positive attitude and work ethic., • Knowledge of AutoCAD Civil 3D and its use to generate site plans, surfaces, profiles, cross-sections, topographic plans, etc., • Knowledge of GIS software is a plus, including using Arc GIS software and using the software in modeling water and waste/water networks. General Characteristics • Uses creativity, foresight, and mature judgment to anticipate and solve new problems., • Practice activities and culture., • Sets priorities and reconciles directions from competing interests., • Leads projects with complex features with work performed directly, or by others., • Integrates engineering economics and risk analysis into the solutions of complex engineering problems., • Integrates solutions to complex problems across specialty areas., • Demonstrates leadership. Minimum Years of Experience • 16+ Years Education • B.S. or M.S. Engineering, Master's Degree or Equivalent Experience Preferred Certification/Licensure • Professional Engineer (P.E.) License, reciprocity in multiple states. Technical Responsibilities • Frequently develops standards and guidelines., • Leads a project in the practice in their area of specialization., • Frequently develops appropriate design alternatives for complex engineering projects that consider realistic requirements, constraints, community input, permitting, and other regulatory constraints., • Integrates advanced concepts, including sustainability, to solve complex problems. Project and Task Management • Frequently oversees technical, legal, and financial issues of an entire project., • Recommends facilities, personnel, and funds required to carry out projects., • Integrates these components into a complete project management plan for a complex engineering project., • Implements effective teamwork and leadership principles into solutions for engineering problems., • Determines project objectives and requirements., • May serve as the Project Manager for certain projects with prior approval from GAI's President up to $150,000 per year. Management Responsibility • Supervises a major practice segment or several teams., • Receives administrative supervision with assignments given in terms of broad general objectives and limits., • Implements staff development plans within their practice segment, including technical, management, and leadership skills., • Evaluates the effectiveness of leaders and teams. Communication Skills • Possesses exceptional oral and written communication skills, including negotiation of critical issues., • Integrates different forms of effective and persuasive communication to technical and nontechnical audiences., • Demonstrates financial acumen and familiarity with legal issues related to engineering practice., • Initiates and maintains extensive contacts with key engineers and officials. Why GAI? GAI offers skilled professionals like you an exceptional place to work, grow, lead, and achieve. Explore an array of opportunities in locations across the U.S. and join accomplished colleagues in tackling challenging projects for a range of markets. Enjoy work location and scheduling flexibility; your choice of comprehensive, personalized benefits; a range of employee wellness programs and discounts; and more. Feel good about being part of a collaborative team that's committed to supporting the communities we serve. Join GAI and distinguish yourself in a company poised for unlimited growth. Benefits To Working at GAI Include: Competitive Pay & Recognition • Market based, competitive compensation, • Performance driven recognition and development bonuses Comprehensive Health & Wellness • Medical, dental, and vision plans, • Company paid short-term and long-term disability, • Company paid life insurance, • Employee Assistance Program and wellness resources Meaningful Work-Life Balance • Generous paid time off + 7 paid holidays, • An additional floating holiday-use it for what matters to you, • Paid maternity, paternity, and adoption leave Growth, Learning & Financial Security • 401(k) with company match, • Tuition reimbursement, • Support and rewards for professional development and certifications EducationBachelors of Engineering (required) Licenses & CertificationsDriver's License (required) Professional Engineer (required) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the _ notice from the Department of Labor.

GAI Consultants, Inc is seeking an EIT - Engineer in Training to work out of our Homestead, Cranberry, or Southpointe, PA office. The successful candidate will enjoy working in a challenging, fast-paced, and team-oriented environment that will utilize their college education and related work experience to develop professionally into a well-rounded engineer with the ability to grow in today's global environment. Job Duties: • Assist in water/wastewater process and pipeline design projects for industrial and municipal clients (power plants, steel manufacturing and data center/mission critical facilities, etc.)., • Assist in Civil Engineering design and calculations for water, wastewater, and stormwater components of new development, modification or remediation projects., • Participates in technical studies, product design, preparation of specifications, and technical plans., • Filling out and completing permit applications for processing., • Field work may include water sampling, site inspection, and construction administration support including completing field observation reports., • Prepare plans utilizing AutoDesk Civil 3D. Physical Requirements • Ability to work indoors in professional office settings., • Ability to sit for extended periods while performing computer-based tasks., • Frequent use of hands and fingers for typing, writing, and handling office equipment., • Visual acuity to read printed materials, digital screens, detailed documents, and perform detailed work., • Occasional standing, walking, bending, or reaching within the office environment. Ability to move between workstations and attend in-person meetings., • Ability to lift and carry office materials or equipment weighing up to 10-20 pounds, with or without assistance., • Adequate hearing to participate in conversations, phone calls, and virtual meetings., • Ability to travel for meetings, training, or business purposes. Qualifications: • Bachelors (B.S.) degree from an accredited college in Environmental or Civil Engineering (M.S. degree a plus), • EIT certification required, • Strong verbal and written communication skills. Strong technical writing skills., • Ability to work in a team environment and work independently as needed on project-specific tasks., • Dedicated commitment to performing quality work with a positive attitude and work ethic., • Knowledge of AutoCAD, Revit and BIM desired., • Knowledge of NPDES permitting, • Knowledge of GIS software is a plus, including using Arc GIS software and using the software in modeling water and waste/water networks., • Industrial water or wastewater treatment experience for projects in the power, data center or manufacturing markets General Characteristics • Develops broad knowledge and skills in a specific practice area., • Evaluates, selects, and applies standard techniques, procedures, and criteria to perform a task or sequence of tasks for conventional projects with few complex features., • Collaboratively uses judgment to determine adaptations in methods for nonroutine aspects of assignments., • Applies principles of probability and statistics to determine risk relevant to engineering. Minimum Years of Experience • 4+ Education • B.S. or M.S. Engineering Certification/Licensure • Passed Fundamentals of Engineering (FE) exam and obtained engineer-in-training (EIT) or engineering-intern (EI) certification. Technical Responsibilities • Performs moderate design tasks., • Prepares portions of plans, specifications, and other project documents., • Performs research and field investigation. Project and Task Management • Works as a part of a team and coordinates work with others., • Assists in determining schedule and budget requirements. Management Responsibility • Receives instruction on specific objectives., • Receives direction on unconventional and/or complex problems and possible solutions., • Receives a thorough review of completed work for the application of sound professional judgment., • Receives mentorship from a licensed engineer typically in their specialty. Communication Skills • Possesses effective oral and written communication skills., • Demonstrates assertiveness and cooperation in managing conflicts., • Interacts with internal and external project team members., • Assists with official communication pertaining to specific assignments/meetings. Why GAI? GAI offers skilled professionals like you an exceptional place to work, grow, lead, and achieve. Explore an array of opportunities in locations across the U.S. and join accomplished colleagues in tackling challenging projects for a range of markets. Enjoy work location and scheduling flexibility; your choice of comprehensive, personalized benefits; a range of employee wellness programs and discounts; and more. Feel good about being part of a collaborative team that's committed to supporting the communities we serve. Join GAI and distinguish yourself in a company poised for unlimited growth. Benefits To Working at GAI Include: Competitive Pay & Recognition • Market based, competitive compensation, • Performance driven recognition and development bonuses Comprehensive Health & Wellness • Medical, dental, and vision plans, • Company paid short-term and long-term disability, • Company paid life insurance, • Employee Assistance Program and wellness resources Meaningful Work-Life Balance • Generous paid time off + 7 paid holidays, • An additional floating holiday-use it for what matters to you, • Paid maternity, paternity, and adoption leave Growth, Learning & Financial Security • 401(k) with company match, • Tuition reimbursement, • Support and rewards for professional development and certifications #INDHP EducationBachelors of Engineering (required) Licenses & CertificationsEIT (required) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the _ notice from the Department of Labor.

Job Description Software Engineer II Summary Do you have a passion for building market leading software solutions for the Metals Industry? As the biggest full-liner for the metals industry, we deliver by seamless integration of our software with metals production equipment and automation systems magnificent results for the steel production of the future. Our team develops systems, which enable the metals industry to produce green steel. We are looking for a Senior Software Developer to support our team on that mission. Who we are At SMS group, our people are our greatest asset. We offer an entrepreneurial environment that promotes a culture of innovation, growth, and inclusion. We offer company events, activities, and opportunities to participate in charitable initiatives that benefit the communities where we work. www.sms-group.us What you'll do In this role, you will be responsible for the development and deployment of complex software solutions that are optimizing metals production. You will work closely with other developers, project managers, and stakeholders to ensure delivery of market leading solutions. Candidates should have a proven track record that demonstrates strong software development skills while a passion for sustainable metals production is advantageous What you'll need • A bachelor’s or master’s degree in computer science, Software Engineering, or equivalent background, • Proven expertise in frontend- (REACT JS) with 3D capabilities and backend (C#) technologies, • Sound Knowledge on modern Database management systems, • At least 3+ years of experience in software development, best with focus on web-based applications., • Excellent problem-solving abilities and analytical skills., • Strong communication and teamwork skills., • Experience in Process automation systems is of advantage What we do SMS group is the leading partner in the world of metals. We are an original equipment supplier offering comprehensive maintenance and spare part services for metals production, continuous casting and rolling (flat and long products), tubes, welded pipes, forging, non-ferrous technology, and heat treatment plants - all from a single source. SMS group Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, religion, national origin, age, sexual orientation, disability, veteran status, gender identity or other categories protected by law. #LI-Onsite

Encore Global - - Responsibilities: Set up and operate basic audiovisual equipment for events; Provide excellent customer service and client communication; Troubleshoot equipment and software issues during events; Ensure accurate setup, operation, and breakdown of AV gear; Maintain familiarity with

At Live Nation Entertainment, our people embrace these qualities, so if this sounds like you then please read on!. Our engineers will see every genre of music and execute live performances flawlessly. Load-In, Set Up, and Load Out of artist's, Live Nation owned, and rental equipment Mix front of hou

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo