Support engineer jobs in Los Angeles, California - Page 18Create job alerts

Job Description seeking an Electrical Engineer Design 2 for a contract opportunity in Woodland Hills, CA. BASIC QUALIFICATIONS (REQUIRED SKILLS/EXPERIENCE): • Bachelor's Degree with 6-13 years of experience, • Understanding operational amplifier circuit topologies and behaviors, • Identify key characteristics of devices and optimize parameters based on requirement specifications, • Design and implement application specific signal conditioning and circuit filtering, • Experience in analog circuit design, modeling, and simulation using Cadence PSpice or Analog Devices LTspice, • Experience with schematic capture and PCB layout using Cadence Allegro, Siemens/Mentor Xpedition, or Altium Designer, • Experience with sub-system and circuit level testing and troubleshooting, • Experience with bench electronic testing tools such as oscilloscopes, arbitrary waveform function generators, logic analyzers, power supplies, spectrum analyzers, and multimeters POSITION RESPONSIBILITIES: We are looking for an Electrical Engineer Design 2 to support our Analog Electrical Engineering department. As a member of the Analog Electrical Engineering department, you’ll get to perform analog circuit design and analysis to support the development of our new product. Design tasks include system level requirements analysis, subsystem level requirements development, detailed evaluation of circuits through design verification and characterization. Analysis tasks include circuit modeling, simulation and testing as well as signal and power integrity analyses on PCB design. Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electronic equipment, products, and systems for military purposes. PREFERRED QUALIFICATIONS (DESIRED SKILLS/EXPERIENCE): • Experience with Printed Circuit Board design using Cadence Allegro PCB Designer, • Experience with HyperLynx Signal and Power Integrity analyses, • Cadence PSpice circuit design, simulation, and analyses, • Experience in design verification and test, • EMI/EMC experience with troubleshooting and identifying solutions, • MSEE with emphasis on analog circuit design REQUIRED EDUCATION: Bachelor's Degree required. School must be accredited. WORK HOURS: 9/80A workweek. ADDITIONAL: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Job DescriptionAbout the teamAt Q-CTRL, Quantum Computing Engineering is a global team of software engineers and infrastructure experts,combining deep technical expertise with a startup mindset to deliver real impact through software innovation. Our work is underpinned by robust standards, and by embracing the three virtues. Our team excels in areas across back-end, front-end, machine learning, and platform engineering. We transform Q-CTRL’s world-leading technological breakthroughs into commercial software products with applications across defense, research, and industry. We work closely with Product, Design, and Research teams to accelerate the path to quantum advantage worldwide. About the roleAs a Software Engineer on the Boulder Opal team, you will work with brilliant engineers and researchers to design and build a scalable, high-performance backend system while directly contributing to our quantum controller infrastructure. A key part of your role will be maintaining and evolving the compiler stack that translates OpenQASM3 + OpenPulse programs for low-level quantum controllers, bridging the gap between high-level quantum programming and physical execution on QPUs. You will collaborate with cross-functional teams, product, infrastructure, frontend, and research, ensuring end-to-end delivery of cutting-edge solutions that power our SDKs and cloud-based offerings. This role is ideal for someone passionate about backend engineering and systems-level programming, with an interest in quantum computing and scientific software. What you'll be doing: • Build the backbone of quantum tech: Design, develop, and optimize scalable backend services in Python., • Own the compiler stack: Maintain and evolve the compiler that translates OpenQASM3 + OpenPulse programs into low-level controller instructions., • Bridge research and engineering: Work closely with world-class researchers and quantum engineers, translating experimental needs into production-ready code and debugging real-world execution challenges., • Experiment on quantum hardware: Get hands-on with QPUs, validating compiler output and controller behaviors through real device experiments., • Engineer for performance: Deliver high-efficiency service-to-service communication using modern protocols (gRPC, GraphQL, REST)., • Shape the future stack: Help define the software practices, tools, and design patterns that will power the next generation of quantum control systems., • Other duties within the Employee's skills and experience, or with reasonable training.Ideally you'll have:, • Bachelor’s degree in Computer Science, Engineering, or related field., • 5+ years of backend software development experience with Python., • Experience with quantum hardware control systems (or similar) or pulse-level programming (e.g., OpenQASM3, Qiskit Pulse, Qua)., • Familiarity with popular Python web frameworks (Django, Flask, FastAPI).It would be fantastic (but not essential) if you bring:, • Familiarity with formal language design (e.g. LL(*) or PEG parsers) and compiler theory or ecosystems (e.g. LLVM/MLIR)., • Experience with implementing Python extension modules with systems programming languages such as C++ or Rust for accelerating Python programs.

Job DescriptionDescription: Position: Outside Sales Engineer – Equipment Location: Santa Fe Springs Reports To: Vice President of Sales Classification: Exempt R.F MacDonald Co. has been in business since 1956 serving California and Nevada. We have over 250 employees involved in sales and service of boilers and pumps for commercial and industrial applications. We have over 50 employees involved in equipment sales and over 125 employees involved in our parts and field service business. We have many employees that have been with our company for ten to fifteen years or more. We have also attracted and retained many employees that have been in the industry for many years prior to joining our company. As we have grown our experienced employees have trained our new employees. We strive to be the most experienced company in the industry we serve. Our VISION STATEMENT reflects the fact that our employees make up what our company is all about: "To provide a superior growth oriented workplace environment, that attracts and retains the best employees in the industry, fostering an attitude that provides our customers with the most innovative, responsive and results oriented effort possible." Position offers health and welfare benefits where compensation will be commensurate with experience. Job Summary R.F. MacDonald Co.’s in Santa Fe Springs/Inland Empire is hiring for an Outside Sales Engineer to join our team! In this role, you will be responsible for proactively calling on contractors, specifying engineers and end-users to develop long-term relationships and generate sales prospects. The expectation is that Outside Sales Engineers will be out of the office three to four days per week and in the office one to two days per week for meetings and to complete necessary paperwork. Responsibilities • Determine client’s needs, and develop and execute an account/system specific solution., • Provide equipment selections and technical detail to engineers, contractors and end-users., • Prepare proposals and submittals., • Advise customers and RFM team on technical questions/issues., • Assist with coordination of equipment purchases with vendors., • Provides project management support over the duration of a project., • Maintain personal data quality in the company’s CRM system., • Works with the administrative personnel to process needed paperwork for vendors and customers. Requirements: • Bachelor's degree in mechanical engineering, chemical engineering, engineering technology, or equivalent from a four-year college or university is preferred., • Ideal candidate will have experience with HVAC systems, steam theory, controls, and/or technical sales., • Good knowledge in appraising the customer’s needs for the sale of various products including hydronic and steam boilers and other equipment in a hydronic system (pumps, expansion tanks, buffer tanks, air separators, chemical pot feeders) or steam system (deaerators/boiler feed systems, blowdown separators, water softeners and chemical feed systems)., • Must be willing to further their knowledge in these areas and any others that will be applicable to the Company’s growth., • Strong presentation skills and ability to present on technical topics to contractor and engineer audiences., • Strong language skills as well as industry specific vocabulary., • Computer skills. Must be proficient with Word, Excel, PowerPoint and CRM (our contact management program). Other Requirements: A valid driver's license is required. Must be insurable with no major infractions. Job will require some travel. Supervisory Responsibility This position has no direct supervisory responsibilities. Work Environment This job operates in both a professional office environment and in internal and external environments which may include inclement weather conditions. Travel to customer job sites is required, which may include outdoor work and/or work in mechanical/equipment rooms. During the site visits, the employee may be exposed to variable weather conditions; moving mechanical parts; heights, and other variable environmental conditions based on location. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. This position is not entirely a deskbound role; however, filing, correlating, reproduction and binding materials are required. This would require the ability to lift files, open filing cabinets, climb stairs, and prepare training and meeting rooms/spaces as necessary. Position Type/Expected Hours of Work This is a full-time position. Days and hours of work are Monday through Friday, 8:00 a.m. to 5:00 p.m. This position regularly requires long hours and occasional travel work as job duties demand. Travel Travel is required for this position to customer sites with out-of-area and possible overnight travel expected. Travel is occasional to all RFMCo. office locations within its operating cities, with out-of-area and overnight travel expected. Other We offer competitive compensation and comprehensive benefits and training that help our employees thrive in both their professional and personal lives. We are proud of our culture which is inclusive and respectful at its core. We value our industry partnerships and are committed to maintaining a healthy and sustainable workplace. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identify, national origin, age, marital status, disability, status as a protected veteran, or any legally protected status.

Job DescriptionAbout us Corner Health is an early-stage technology company building the operating system for independent primary care. We give Nurse Practitioners (NPs) everything they need to start and run their own practices — from billing and insurance infrastructure to AI-powered workflow automation. We’re positioned to be the fastest growing in-person primary care company ever. Corner Health was co-founded by Lava Sunder and Anne Gifford and has raised a Series A backed by top investors, as well as the founders of DoorDash, Commure, Grow Therapy, Kindred, Culdesac & more. About the Role We’re looking for a Design Engineer to design and build the patient experience at Corner Health. Providers on Corner Health’s platform offer an entirely new model of care. Currently, 88% of patients trust a Corner Health provider’s medical guidance vs. elsewhere and patients already return at 2× the national average — not because of marketing, but because the experience actually works. The next phase of the company is about turning that into the most thoughtful, intuitive, and human patient experience in primary care. This is not a handoff role. You won’t be polishing a legacy healthcare portal. You’ll be defining what modern primary care should feel like. What you’ll work on • Patient app (from zero): Design and build a cohesive web app spanning scheduling, chat, results, notifications, payments, and rebooking. This is a greenfield build — you'll make the foundational decisions about architecture, interaction patterns, and visual identity., • Making healthcare legible: Insurance, billing, and clinical data are notoriously opaque. You'll turn complex, messy systems into clear, trustworthy interfaces that patients can actually understand and act on., • Longitudinal patient experience: Primary care shouldn't end when the appointment does. As the platform matures, you'll design experiences around proactive follow-ups, care nudges, and personalized health journeys that deepen the provider–patient relationship over time. As one of our earliest hires, you'll hold an already high bar on design and craft, influence the product roadmap, and shape how design and engineering work together at Corner Health. What you’re like • You have 4+ years of frontend engineering experience with strong TypeScript and CSS chops. You've worked with component libraries, design systems, and care about interaction details (we use React, Tailwind, and React Aria), • You ship production code and have strong visual taste — not a designer who can kinda code, but an engineer who thinks in terms of design, • You are hard-working, kind, curious, and intelligent, • You have a high degree of autonomy and can own a product surface end-to-end, • You are excited about working in a dynamic, constantly changing environment, • You are pragmatic about incorporating agents and LLMs in your work and are familiar with the ways AI excels at frontend work vs. where it comes up shortWhat would set you apart, • You’re excited by the idea of creating more independent medical providers, • You are product-first — you drive end-to-end execution, from understanding the problem through QAing the details, • You have experience building and maintaining visual identity and design coherence across a product, • You’re more comfortable maintaining design systems in code vs. Figma, • You empathize with users and are comfortable with good + fast over perfect + slow, • You enjoy working in-person (our office is in Santa Monica, CA); you either live in LA or are excited to move to LABenefits, • Competitive salary & equity compensation, • Top-tier health and dental, • Health & wellness stipend Here are some of our engineering principles - they are all important, but we’re excited for this hire to contribute to them as well. Ship early, ship often We prioritize frequent deployments to maintain momentum and learn quickly. Small PRs are faster to review, easier to roll back, and create positive feedback loops. We use feature flags for gradual rollouts and invest in robust CI/CD with comprehensive testing. Merging to main should be routine, not stressful. Choose boring technologies (mostly) We default to established, battle-tested technologies with strong ecosystem support and good LLM integration (Prisma, WorkOS, Node.js, etc). We have limited innovation tokens—spend them on problems that differentiate us or bring genuine joy to the team. Strong foundations let us move fast and experiment at the edges where it matters, whether that's core product features or fun internal tooling. Work with the garage door up We build transparency into our development process. PRs are reviewed by the team—not just for code quality, but to share knowledge and create visibility into what we're building. We document decisions, share work-in-progress updates, and make our process discoverable. This enables early feedback, prevents duplicate work, and helps everyone learn from each other's approaches. Great ideas emerge from collision, not isolation. Code as documentation In the LLM era, clear code, consistent patterns, and well-documented systems are force multipliers. We document our patterns, conventions, and common workflows. We automate repetitive tasks through scripting and templates. When AI tools repeatedly make the same mistakes, we update our rules and guidelines. Enforcing consistency today saves hours tomorrow. Own your code LLMs are powerful tools that can accelerate development, but every line of code you submit should be code you understand, can defend, and have proven to work. When you open a PR, you're putting your name on that solution—be ready to explain how it works, why you chose that approach, and what trade-offs you considered. Use AI to explore ideas and generate starting points, but take the time to understand, refine, and truly own what you're shipping. We build trust through craftsmanship, not through volume. We're a small team with high ownership and high autonomy. AI tools let us punch way above our weight, but we care deeply about the quality of what we ship — no vibe coding, no slop. You'll spend your days building, not waiting on approvals or sitting in meetings. Lastly - one of our team values is “Life is short - it’s OK to laugh”. Whether it’s late night team dinners, mini golf, or just jamming on new product ideas for our customers - we work hard and have fun doing it. Corner Health is proud to be an equal opportunity employer and considers all qualified applicants for employment without regard to race, color, religion, age, sex, sexual orientation, gender, gender identity, national origin, disability, veteran status or any other legally protected characteristic. We also consider for employment all qualified applicants regardless of criminal histories, consistent with applicable law.

Job DescriptionOverview Company Overview: Join Allied Universal® Technology Services, a global leader in transforming the security industry. We integrate advanced technology - video surveillance, electronic access control, alarm monitoring and augmented solutions with physical security to help people feel safe. Whether you're an installation technician, service technician, engineer, or project manager, you'll discover rewarding opportunities to grow your career as part of a valued team. Apply today and be phenomenal-build a meaningful career while protecting what matters most through innovative security technology. Job Description: Job Description Allied Universal® is hiring an Electronic Security Design Estimator. The Electronic Security Design Estimator works independently on system design, proposals, estimating, planning and supporting the achievement of meeting sales goals. RESPONSIBILITIES: • Conduct site walkthroughs with client and sales understanding the need, • Develop technical solutions that map customer business requirements to security technology solutions, • Generation of technical scopes of work (SOW) and detailed design narratives for technical solutions and associated cost estimates, • Manage estimation process to include interfacing with multiple representatives of sales, management, and customer teams, • Analyze blueprints, construction drawings, and technical/functional design specifications to prepare compliant solutions, • Interface with product and distribution partners to obtain systems, device, and equipment pricing during estimating process, • Support Sales Team by participating in technical discussions and meetings with customers and/or product partners, to include ROI (Return on Investment) conversations and presentations, • Understanding quality assurance and compliance with organizational standards and RFP requirements QUALIFICATIONS (MUST HAVE): • High school diploma or equivalent, • Minimum of three (3) years of experience with integrated electronic security solutions, • Minimum of two (2) years of experience in a pre-sales support/engineering position, • Working knowledge of network Infrastructure Including switches, routers, IP configuration, • Strong technical knowledge of network infrastructure, video analytics, SaaS, access control systems, intrustion detection systems and cloud-based security solutions, • Excellent communication skills; able to manage multiple priorities, maintain confidentiality, and collaborate effectively, • Advanced skills with Microsoft Office (Excel, Outlook, PowerPoint, Project, Visio, and Word), • Skilled in utilizing a PDF editing software, creation tools such as Bluebeam for device plotting, and team collaborations, • Ability to travel (20%-30%) on an as needed basis PREFERRED QUALIFICATIONS (NICE TO HAVE): • College degree in Computer Science, Engineering, or another related major, • Project Management (PMP) certification, • Any of the following:, • Physical Security Professional (PSP), • Cisco Certified Network Associate (CCNA), • Product specific certification in Access Control and Video platforms BENEFITS: • Medical, dental, vision, retirement plan, basic life, AD&D, and disability insurance, • Eight paid holidays annually, five sick days, and four personal days, • Vacation time is offered at an accrual rate of 3.08 hours biweekly. Unused vacation is only paid out where required by law., • Pay Range: $85k-$100k annually plus 2.5% quarterly bonus #LI-26 Closing Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: If you have any questions regarding Equal Employment Opportunity, have difficulty using the online system and require an alternate method to apply, or require an accommodation at any time during the recruitment and/or employment process, please contact our local Human Resources department. To find an office near you, please visit: . Requisition ID 2026-1586361

Job DescriptionHermeus is a venture-backed defense aviation company reclaiming the lost art of rapid iterative prototyping to build the fastest aircraft in the world today. By prioritizing relentless hardware iteration, we deliver high-speed systems at the pace of the modern battlefield. We work with the Department of War to provide the high-speed capabilities our nation and its allies need to maintain a durable, asymmetric advantage. We are seeking an Integration Engineer to own the design release, build, test, and delivery of key vehicle fluid, propulsion, and mechanism assemblies — including control surface actuators, spike inlet systems, engine integration, and other mission-critical hardware. You will serve as the technical bridge between design, manufacturing, and test, ensuring our hardware is built with precision, efficiency, and reliability. This role requires a hands-on engineer with a strong background in mechanical systems, propulsion, and fluids — capable of driving complex assemblies from concept through validation in a fast-paced, first-principles environment. Responsibilities • Provide design feedback to improve manufacturability, assembly, testability, and integration for complex fluid and propulsion systems., • Establish and maintain build roadmaps for assigned assemblies to align key stakeholders, drive hardware and tooling deliveries, and minimize build serialization., • Develop and release build CONOPS, work instructions, standard processes, and procedures to enable high-quality, high-velocity execution., • Lead and support first-article builds in an early-stage, rapid-development environment, identifying and resolving issues in real time., • Own design, process, and capital equipment trades to unlock key production capabilities and support scalable manufacturing infrastructure., • Drive make-vs-buy decisions and collaborate closely with design engineering, manufacturing, and supply chain teams., • Provide hands-on support during build, integration, and test operations, ensuring technical issues are addressed quickly and effectively., • Support test readiness activities, including component and system pressurization, leak checks, actuator functional tests, and propulsion integration., • Drive continuous improvement across the production floor — including tooling, ERP/MES workflows, build documentation, and internal specifications., • Champion a safety-first mindset, especially during hazardous or high-pressure operations. Qualifications, • Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, or related technical field., • 3+ years of hands-on experience in hardware integration, assembly, or manufacturing of fluid, propulsion, or mechanical systems., • Familiarity with aerospace assembly best practices, including precision fitting, torque control, and contamination prevention., • Exposure to tolerance stack-up analysis, system P&ID development, actuator testing, leak checks, and valve assembly or test., • Strong understanding of GD&T, CAD modeling, and first-principles design and analysis., • Proven ability to communicate effectively across design, manufacturing, supply chain, and test organizations., • Demonstrated initiative and ownership, with the ability to define and implement new processes from scratch.Preferred Skills and Experience, • Experience supporting new product introduction or flight hardware integration in an aerospace or defense environment., • Direct experience authoring and executing build work instructions and leading complex first-time build efforts., • Familiarity with pressurized systems, hazardous operations, or test campaigns involving cryogenic, pneumatic, or propellant systems., • Experience with welded tube, valve, or manifold assemblies (TIG, MIG, or laser welding)., • Exposure to R&D or low-rate production environments, including vendor engagement, tooling development, and hands-on troubleshooting., • Strong systems-level understanding of propulsion and fluid control architectures. Additional Requirements, • Must be willing to be hands-on in a manufacturing and test environment daily., • Ability to lift up to 25 lbs and work safely around high-pressure systems and industrial equipment.

Job DescriptionDescriptionAs a Senior NX Application Engineer at Impulse Space, you will own the administration and optimization of our Siemens NX and Teamcenter ecosystem. In this role, you will be the primary technical expert responsible for the health of our CAD environment. You won't just be managing software; you will be building the infrastructure that allows our propulsion, structures, and avionics teams to collaborate seamlessly. From architecting standard part libraries to troubleshooting complex assembly issues, your work will directly impact the speed at which we can design and fly. Responsibilities • CAD Administration: Manage and optimize Siemens NX configurations, including site defaults, customer defaults, and environment variables to ensure peak performance across the engineering team., • PLM Integration: Administer and support the NX-to-Teamcenter integration, ensuring seamless data flow, revision control, and workspace management., • Part Library Management: Design, build, and maintain comprehensive NX Reuse Libraries and standard part catalogs (fasteners, fittings, electronic components) to drive design standardization and speed., • End-User Support: Serve as the "tier 3" technical expert for the engineering team, resolving complex NX/Teamcenter issues, modeling bottlenecks, and drafting standard operating procedures (SOPs)., • Workflow Optimization: Develop and implement best practices for large assembly management, synchronous modeling, and model-based definition (MBD) to improve design efficiency., • Upgrades & Testing: Lead the testing and deployment of NX and Teamcenter patches and version upgrades, ensuring zero downtime for the production design environment. Minimum Qualifications • Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, or a related technical field., • 5+ years of experience in a CAD/PLM administration role, specifically focused on Siemens NX. Preferred Skills and Experience • Demonstrated professional knowledge of Teamcenter (Active Workspace and Rich Client) and its integration with NX., • Demonstrated experience setting up and managing CAD Part Libraries and standard catalogs in a professional aerospace or automotive environment., • Experience with NX Open, C++, or Python for automating repetitive CAD tasks., • Background in Aerospace & Defense manufacturing, with a strong understanding of how CAD data flows into downstream manufacturing and assembly processes., • Familiarity with "Model-Based Enterprise" (MBE) initiatives and Digital Twin concepts., • Strong interpersonal skills with a "customer-service" mindset toward supporting a diverse team of engineers., • Ability to thrive in a rapid-prototype environment where requirements evolve quickly. Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Elastium is transforming the legacy footwear industry toward rapid, fully automated, and localized production. Our manufacturing platform combines proprietary 3D printing technology, software, and materials science to make shoe production as effortless as pushing a button. We're building the most frictionless way of turning bits into useful atoms, sending ripples of singularity across the industry, and bringing tens of billions of GDP back to America. What you'll do You'll fully own the nervous system of the most advanced FGF/FDM 3D printers on Earth, from PCBs to control packaging and harnessing. Your mission: build E/E systems that ruthlessly reduce complexity, are easy to assemble and support, and scale fast. Specifically, you will: • Execute full PCB design cycle: requirements, schematic design, component selection, layout, bring-up, test, debug and integration., • Develop electrical schematics, wiring interconnect diagrams and generate production specs for cables and harnesses., • Lead the automation/DFM war on control packaging, from design through production, to reduce build time, wiring complexity, and manual assembly. Requires deep experience with traditional panel design and assembly process., • Hunt down complex electrical/software issues using oscilloscopes, logic analyzers, and embedded debugging tools., • Source electrical components including connectors, harnesses, sensors, power/distribution hardware., • BS in Electrical Engineering or equivalent., • 5+ years of experience designing, testing, and shipping complex E/E systems (Robotics or Industrial Tech preferred)., • Proficiency with Altium Designer., • Demonstrated ability to create electrical drawings and build or oversee the build of control panels., • Familiarity with standard interfaces such as EtherCAT, Modbus, CAN, I2C, SPI, etc., • Familiarity with common electromechanical components such as servo drives, linear motors, encoders, solenoids, RTDs, and their specific interfacing needs., • You're high-agency operator with mission-critical discipline and accountability. You identify and neutralize threats before they escalate. Why this job matters At Elastium, you won’t be another engineer optimizing inside an existing box—you’ll build in the wild, architecting a new industrial era where factories run like software, starting with footwear. Footwear is an enormous challenge because it’s a massive, messy, labor-heavy industry that left the U.S. for a reason. Reinventing how footwear is made at scale requires the deployment of autonomous plants with thousands of robots that can be reconfigured in real time with no human in the loop. If you want to solve problems that fundamentally reshape the physical world, this is the mission.

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We recently raised $260 million dollar Series C to accelerate this mission. We are excited to launch a new Factory in Mesa, Arizona, a 270,000-square-foot facility that will create 350 new jobs immediately. We are opening a new headquarters to support thousands of future hires, launching Hadrian Maritime to serve the naval production sector, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian collaborates with startups, Tier 1 and Tier 2 suppliers, and major defense contractors across aerospace, shipbuilding, and aviation to scale production, reduce costs, and expedite delivery on mission-critical programs—leading investors, including Lux Capital, Founders Fund, and Andreessen Horowitz, back us. Our fast-growing team is united by a shared mission to reindustrialize American manufacturing for the 21st century and beyond! The factories-as-a-service team analyzes our current customers' production and supply chain challenges, builds data-driven presentations, designs and scopes factories of the future, and assists the Federal and Strategic sales team in forming long-term partnerships with the DOD, Primes, and other manufacturers. This team is responsible for scoping, design, cost, schedule, and technology analysis, as well as proposals for major programs and manufacturing transformations across all manufacturing methods and domains. With several major programs in flight, we are hiring rapidly for this team that will effectively analyze, design, scope, plan, and handover (or join) execution of large-scale manufacturing efforts. The Role: Hadrian is seeking a Process Engineer with expertise in sheet metal manufacturing to define and develop robust, scalable production processes for complex parts. This role is hands-on, fast-paced, and cross-functional — enabling production readiness and factory design for critical programs. You’ll translate technical data (BOMs, CAD models, drawings) into actionable manufacturing strategies, working closely with design, operations, quality, and customer teams. You’ll scope new parts, develop process routings, and define the tooling, equipment, and inspection infrastructure needed to build them at scale. What You'll Do: * Analyze engineering data to classify and scope sheet metal parts into process families * Develop first-principles cycle time estimates and detailed process routings * Define factory requirements for cutting, forming, welding, finishing, and inspection * Translate processes into staffing, equipment, layout, and QA plans * Specify tools, jigs, fixtures, and inspection equipment * Collaborate with internal and external stakeholders to validate assumptions and drive alignment * Own the process definition from part intake through production ramp * Drive schedule recovery, manufacturability improvements, and risk mitigation for critical programs What We're Looking For: * 5+ years of hands-on experience in sheet metal manufacturing or process engineering * Strong understanding of flat pattern development, bend allowances, and GD&T * Proficient in sheet metal processes: laser/plasma/waterjet cutting, forming, spot/GMAW/GTAW welding, finishing * Experience developing process routings, tooling/fixture designs, and quality plans (FAI, SPC, MSA) * Clear communicator with strong documentation and project planning skills What Will Set You Apart: * Experience launching new production lines or greenfield operations * Exposure to aerospace, defense, or other regulated manufacturing environments * Familiarity with NDT, weld qualifications, and special processes * Background in automation, robotics, or advanced inspection techniques Benefits * Medical, dental, vision, and life insurance plans for employees * 401k * Relocation support may be provided for certain situations, based on business need. * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. The Role Engineering velocity is a strategic advantage at Hadrian. As we scale our software organization, the quality of our tools, workflows, and development practices directly determines how fast we can move. The Builder Tools team owns that surface area, working across the entire SDLC to reduce friction, accelerate delivery, and bring AI-assisted development practices to every engineering team. As Senior Engineering Manager of Builder Tools, you will lead a team of 6-10 engineers focused on engineering productivity, internal tooling, and AI-enabled development workflows. Your users are Hadrian's engineers, and your mission is to make them faster and more effective. You will report to the VP of Engineering and partner closely with infrastructure, security, and product teams to drive improvements across CI/CD, testing, deployment, and observability. This is a high-leverage role. The work you ship here touches every engineer at Hadrian. What You'll Do * Lead and grow a team of engineers focused on engineering productivity and internal developer tools * Define and execute a roadmap to improve end-to-end SDLC efficiency and reliability (plan, build, test, deploy, observe) * Drive adoption of AI-assisted development tools across engineering, from code assistants to LLM-powered workflows * Identify bottlenecks in developer workflows and implement scalable, lasting solutions * Improve CI/CD systems, testing frameworks, and deployment processes * Establish metrics to measure developer productivity and system performance * Partner with infrastructure, security, and product teams to improve delivery pipelines * Hire, mentor, and develop engineers and tech leads * Ensure high standards for reliability, scalability, and maintainability across internal tooling What We're Looking For * 8-12 years in software engineering, with 3-5+ years in engineering management * Strong backend or platform engineering background with deep familiarity with modern SDLC systems * Experience leading and scaling high-performing engineering teams * Track record of delivering measurable improvements in engineering velocity or system reliability * Ability to think in systems: understand the end-to-end development lifecycle and identify where to optimize * Experience with CI/CD tooling (GitHub Actions, Buildkite, or similar), observability stacks (Datadog, Prometheus), and cloud infrastructure (AWS/GCP, Kubernetes) * Bachelor's degree in Computer Science or related field, or equivalent experience What Will Set You Apart * Hands-on experience implementing AI-assisted development workflows * Familiarity with LLM APIs (OpenAI, Anthropic, etc.) and AI coding tools (Copilot, Cursor, etc.) * Experience with CI/CD optimization at scale * Strong data-driven approach to measuring and improving developer productivity * Ability to treat internal tooling as a product: clear users, defined impact, feedback loops * Experience driving adoption of new tools and workflows across engineering organizations Growth & Trajectory This role is a high-leverage position with significant room to grow. As Hadrian's engineering organization scales, the scope of this function expands with it. The natural trajectory leads toward a Manager-of-Managers role (M5) with broader ownership of the engineering productivity org and potential leadership of Hadrian's AI strategy for engineering. Compensation For this role, the target salary range is $197,500 - $257,000 (actual range may vary based on experience). This is the lowest to highest salary we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. Benefits * Medical, dental, vision, and life insurance plans for employees * 401k * Relocation support may be provided for certain situations, based on business need. * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job Description Mitsubishi Electric Trane HVAC US LLC is looking for a Technical Instructor II in Cypress, CA. POSITION SUMMARY: Responsible for primarily providing technical training to internal and external customers on Mitsubishi Electric Trane HVAC US LLC (METUS) products and systems offered and related software packages. Responsibilities include in-house and on-site customer instruction. The Technical Instructor will have personal interaction with various levels of customers ranging from dealer/distributor owner/president to engineer to contractor/service mechanic on a daily basis. ESSENTIAL FUNCTIONS The essential functions of the position include, but are not limited to the following: • Provide technical training for internal and external customers both on-site and in METUS training centers., • Setup, configure and maintain training equipment and information libraries., • Conduct on-site assessments of customers’ installation and maintenance functions to determine needs for follow-up training., • Participate in the design, development, and/or updating of training programs and supporting materials such as training guides, practical exercises, assessments, and other handouts consistent with product updates and releases., • Assist with the training and qualification process for internal and external Authorized Trainers., • Assist with design, layout, equipment selection and periodic inspection of METUS Authorized Training Centers., • Manage the upkeep and maintenance of assigned METUS training centers including installed equipment, test equipment and tools and facilities., • Provide back-up technical support for internal and external customers when required., • Work closely with service department staff to keep up with current issues and solutions., • Willing to travel up to 40% for various Company meetings and training both domestically and possibly Internationally, • Associates degree or a minimum of five years technical experience in the HVAC field., • Minimum of two years of experience in formal training delivery. Military technical training experience is a plus., • Proven experience in troubleshooting complex electronic and refrigerant flow systems., • Highly enthusiastic and energetic person capable of building and maintaining customer interest during training., • Ability to communicate effectively, both orally and in writing, and through formal presentations., • Comprehensive working knowledge of the tools included in the Microsoft Office Professional Suite., • Ability to work remotely and independently with little direct daily supervision, • Ability to translate complex thoughts and ideas and communicate them in an easy to understand form. ABOUT MITSUBISHI ELECTRIC TRANE HVAC US Formed in 2018, Mitsubishi Electric Trane HVAC US (METUS) is a leading provider of ductless and VRF systems in the United States and Latin America. A 50 percent – 50 percent joint venture between Ingersoll Rand plc and Mitsubishi Electric US, Inc., the company provides innovative products, systems and solutions capable of cooling and heating any application from a home to a large commercial building. METUS is a leading marketer of Zoned Comfort Solutions® and Variable Refrigerant Flow (VRF) air-conditioning and heating technology. Systems sold by the joint venture include a wide variety of technologically advanced products designed to deliver superior efficiency, comfort and control. The family of brands supported by METUS includes: Mitsubishi Electric Cooling & Heating, Trane® / Mitsubishi Electric and American Standard® Heating & Air Conditioning Mitsubishi Electric. More information is available at . We offer an excellent compensation and benefits package including 401(K). In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. We are an equal employment opportunity employer. All employment decisions are made without regard to race, color, religion, sex, pregnancy, breastfeeding or related medical condition, national origin, ancestry, citizenship, age, marital status, sexual orientation, gender identity, gender expression, domestic partnership, physical disability, mental disability, medical condition, genetic characteristic or information, military or veteran status or other legally protected status (except when one of these criteria is a legally permissible bona fide occupational qualification). The Company will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the Company, or (c) consistent with the Company’s legal duty to furnish information. To view the EEO is The Law Poster and the supplement, please click here or visit . Applicants with a disability who need assistance with the application process may contact Human Resources by email at or by calling 714.229.3813.

Job DescriptionAHEAD builds platforms for digital business. By weaving together advances in cloud infrastructure, automation and analytics, and software delivery, we help enterprises deliver on the promise of digital transformation. At AHEAD, we prioritize creating a culture of belonging, where all perspectives and voices are represented, valued, respected, and heard. We create spaces to empower everyone to speak up, make change, and drive the culture at AHEAD. We are an equal opportunity employer, and do not discriminate based on an individual's race, national origin, color, gender, gender identity, gender expression, sexual orientation, religion, age, disability, marital status, or any other protected characteristic under applicable law, whether actual or perceived. We embrace all candidates that will contribute to the diversification and enrichment of ideas and perspectives at AHEAD. AHEAD’s Sr. Observability Solutions Engineers are the technical experts that collaborate with our AHEAD account teams to help identify, qualify, and build solutions that support our customer’s Digital Business transformation. The AHEAD Sr. Observability Solutions Engineer (SSE) will be focused on technologies such as Datadog, Dynatrace, Chronosphere, etc. The SSE is considered a subject matter expert in these areas with responsibility for selling and designing complex solutions. The SSE is also considered an organizational thought leader for their specialty area. Responsibilities • Active participation in the AHEAD SSE and service delivery teams, • Be a thought leader for AHEAD clients, responsible for designing, architecting technical solutions, • Support the sales teams during engagements by providing advice and solutions or proposals optimized to meet customer technical and business requirements, • Develop relationships with other Observability SSE team members, leaders, and partners in support of sales objectives, • Strategize and execute technical sales calls, • Complete required pre-sales documentation (configurations, pricing, services, presentations, justifications, etc.) quickly and accurately, • Qualify sales opportunities in terms of customer technical requirements, decision-making process, and funding, • Present and market the design and value of proposed AHEAD solutions and business justification to customers, prospects, and AHEAD management, • Participate in the mentorship of entry-level team members, • Possess strong, detailed product/technology/industry knowledge, • Knowledge of job-associated software and applications, • Travel required up to 30%Qualifications, • Expertise in observability technologies such as Datadog, Dynatrace, Chronosphere, New Relic, Splunk, etc, • Expertise in with Splunk Enterprise, Splunk Cloud, and Splunk Enterprise Security, • Expertise as a consultant for clients, advising on technical solutions and participating in pre-sales and solution development, • Enterprise experience with Cloud Infrastructure, networking and system administration, • Experience in architecture leadership that brings together and integrates solutions across multiple vendors, • Ability to evaluate new technologies and provide internal training, • Ability to understand customer needs, define requirements, and design solutions, • Ability to develop and present architectural recommendations and implementation/ assessment services, • Excellent written and verbal communication skills, • Excellent presentation skills, • Extensive experience with Visio and PowerPoint, • Strong technical aptitude, • Provide technical leadership assuring quality, maximizing team output, • Self-motivated, • Cribl and Big Panda experience a plus

A leading technology firm in El Segundo is seeking a skilled network engineer to support the U.Space Force in developing advanced defense systems.This role requires at least 6 years of experience, a Bachelor’s degree, and a Top Secret clearance.Key responsibilities include troubleshooting network

Job DescriptionProject Engineer (Construction / Mechanical) Location: Southern California Our client is seeking a detail-oriented Project Engineer to support construction project execution by managing documentation, coordinating communication, and assisting Project Managers throughout the project lifecycle. Key Responsibilities • Manage document control: track, organize, and distribute project documents, • Coordinate meetings and maintain accurate meeting minutes, • Collect and process submittals from vendors and subcontractors, • Assist with RFIs, proposals, budgets, and project schedules, • Communicate project updates to internal teams and clients, • Support project closeout documentation and deliverables, • Ensure all project information is accurate, organized, and up to date, • Promote clear communication and a collaborative project environmentRequirements, • Experience in construction project support or project engineering, • Strong document control experience required, • Ability to manage multiple tasks in a fast-paced environment, • Proficiency with Microsoft Office and project/document management tools, • Familiarity with scheduling software (Microsoft Project preferred), • Strong organizational, communication, and problem-solving skills, • Team-oriented with the ability to work cross-functionally

Job Description About Elco Lighting: Elco Lighting is a recognized leader in the lighting industry, committed to delivering innovative and high-quality lighting solutions. We are seeking a dedicated and skilled Product Testing Engineer to join our team and play a critical role in ensuring the excellence of our products. Job Summary: The Product Testing Engineer will be responsible for the comprehensive testing and evaluation of Elco Lighting products, focusing on electrical and mechanical performance, reliability, and compliance with industry standards. This role requires a strong engineering background, meticulous attention to detail, and the ability to work effectively with both internal teams and external testing laboratories. Responsibilities: ● Product Testing and Reporting: Develop and execute detailed test plans for lighting products, including LED fixtures, dimmers, and related electrical and mechanical components. Conduct rigorous testing to assess product performance, durability, and safety. Generate comprehensive test reports documenting test procedures, results, and analysis of product quality. ● Product Improvement: Analyze test data and identify areas for product improvement and optimization. Collaborate with design and engineering teams to implement corrective actions and enhance product performance and reliability. Contribute to the product development process by providing testing feedback. ● Regulatory Compliance and Certification: Work closely with external testing laboratories (UL, ETL) to ensure products meet all applicable safety and performance standards. Manage the testing and certification process for regulatory compliance, including Title 24 requirements. Maintain up-to-date knowledge of industry standards and regulations. ● Jobsite Troubleshooting: Provide technical support and troubleshooting assistance for product issues encountered on job sites. Analyze field failures and provide recommendations for resolution and prevention. Travel to job sites as needed to investigate and resolve product-related problems. ● Electrical and Dimmer Testing: Conduct thorough electrical testing to ensure product safety and performance. Perform dimmer compatibility testing to ensure optimal performance and compatibility with various control systems. ● LED Testing: Perform detailed LED testing, including photometric measurements, color rendering analysis, and thermal management evaluation. Qualifications: Bachelor's degree in Electrical Engineering or Mechanical Engineering. Proven experience in product testing and quality assurance. Strong understanding of electrical and mechanical principles. Experience with LED technology and lighting products. Familiarity with industry standards and regulations, including UL, ETL, and Title 24. Experience working with external test laboratories. Ability to use test and measurement equipment. Preferred Qualifications: Experience in the lighting industry. Knowledge of lighting control systems and protocols. Experience with test automation. Join Us: If you're ready to illuminate your career and make a significant impact on the future of lighting, we want to hear from you. Company DescriptionThe Leading Choice - Both customers and competitors alike see ELCO as a leader in luminaire manufacturing.The Leading Choice - Both customers and competitors alike see ELCO as a leader in luminaire manufacturing.

Job DescriptionDescription: Join a culture of excellence: Where your ideas are heard and valued. Where your hard work is recognized and rewarded. Enjoy our 9/80 work schedule with every other Friday off! We offer Health, Dental, and Vision Insurance, Company paid Life, Short- and Long-Term Disability, 401(k) with matching contribution, Holiday, Paid Time off, and more! Cristek Interconnects, LLC. is a positive and inclusive work environment looking to grow our team. The ideal candidate is aligned with our outstanding culture and would like to be part of the best interconnect company in the world. Someone looking to thrive in a career by learning new skills with hands-on training. Someone who is detail oriented and has a positive attitude. Join us and be a part of our journey of success! Position Summary:Cristek manufactures electrical connectors, cable assemblies, harnesses, and related electro-mechanical products, and holds multiple quality certifications including AS9100 & ISO 9001. Cristek, established in 1985, is headquartered in Anaheim, CA with divisions in North Billerica, MA and Minden, NV. The Electrical Engineer I will collaborate with associates across multiple departments & sites, to support electrical test systems, troubleshoot production issues, and perform electro-mechanical design through all development stages. Job Responsibilities: • Collaborate with test lab personnel and other engineers in the support of production electrical test systems,, • including programming, troubleshooting, and optimization., • Lead the bringing-up and qualification activity for newly purchased electrical test equipment., • Support automation systems, including current production systems and those under development., • Provide Electrical Engineering support for all production lines, at all Cristek sites., • Perform research supporting new electro-mechanical programs under development., • Create test plan documents based on customer requirements., • Develop and document test harnesses based on product to be tested and required test equipment., • Evaluate electrical and electro-mechanical details of customer requests for new products in the RFQ stage., • Analyze customer requirements to determine the most cost-effective, technically compliant, and, • schedule-compliant approach to meeting customer needs., • Design and analyze PCBs, circuits, flex cable assemblies and their associated interconnects. Support the design of, • electrical connectors, custom cables & harnesses, and custom electro-mechanical systems., • Assure that designs comply with requirements from the customer, from Cristek, and from industry standards., • BS or advanced degree in Electrical Engineering, or similar field., • Minimum 2 years industry experience., • Exposure to manufacturing processes, and assembly & testing of precision electro-mechanical assemblies., • Experience in the use of Multi-point testers, Network Analyzers, Oscilloscopes, Multi-meters, and associated lab equipment., • Experience in PCB design, including routing and devices., • Programming and test experience with LabView, Python, Matlab, or similar environments., • Exposure to the design and testing of coaxial or RF/microwave cables., • Experience in designing and simulating electrical circuits., • Experience with the design of automated systems., • Understanding of EMI susceptibility and mitigation., • Understanding of electrical testing, including Hi-Pot, continuity, resistance, signal loss and capacitance., • Proficiency with MS Office, including Word, Excel, Outlook, and PowerPoint., • Strong organizational, analytical, decision making, & problem-solving skills, and attention to detail. Cristek, a Qnnect company, is committed to fostering a diverse and inclusive workplace. We offer comprehensive benefits, including medical, dental, vision, PTO, paid holidays, 401(k) with matching, disability insurance, tuition reimbursement.

Job Description Reactor Operations Engineer, Nuclear Radiant is a seeking a nuclear engineer responsible for designing and implementing nuclear-specific testing operations at our 2026 demonstration. You will be responsible for the design of a large portion of the test campaign, which includes providing analysis to verify that the proposed testing is both safe and meets the test’s objectives. This position will work closely with nuclear engineers to establish test success criteria and systems / operations engineers to implement written procedures. Responsibilities and Duties: * Collect testing requirements, objectives, and success criteria from nuclear engineers. * Develop procedures that satisfy test requirements within the operational bounds of Kaleidos. * Perform various reactor physics calculations (neutronic and transient analyses) to verify proposed testing sequence addresses all requirements. * Document testing procedures and support operator training and control room GUI development. Required Skills and Qualifications: * Bachelor’s degree in nuclear engineering or equivalent degree from an accredited institution. * 2+ years of experience with reactor operations. * Experience with radiation transport methods, including with codes such as MCNP/OpenMC/Serpent. * Knowledge of thermal hydraulic fundamentals. Desired Skills and Qualifications: * 4+ years of experience with reactor operations. * Direct experience as a reactor operator of an existing nuclear reactor. * Hands-on experience in developing technical procedures, human factors engineering, or operational interface design. Additional Requirements * Must be willing to work extended hours and weekends as necessary to accomplish our mission. * Must work 100% onsite at El Segundo HQ. Benefits and Perks * Stock: Substantial incentive stock plan for all full-time employees. * Medical: 100% up to base silver level plan for employee + 50% dependents, offers up to Platinum plans. * One Medical: Sponsored memberships for employees and their dependents. * Vision: 100% top tier plan coverage + 50% for dependents. * Dental: 100% top tier plan coverage, orthodontia extra, 50% for dependents. * Voluntary life, accident, hospital, critical illness, commuter and FSA/HSA are offered as employee contributed benefits. * 8-weeks of paid parental leave for all parents. Additional paid pregnancy leave for CA employees. * Daily catered lunch. Free snacks and drinks. * Flexible PTO policy. Remote workday allocation. * Company and team-bonding events, happy hours and in-person camaraderie. * Beautiful El Segundo headquarters close to the Pacific Ocean. Total Compensation and Benefits Radiant compensates people for impact and invests in those who continue to raise the bar. Radiant’s new hire compensation package includes base salary, substantial equity grants, and comprehensive health benefits. Total compensation and level are determined through a rigorous evaluation of interview performance, experience, education, and qualifications, and are designed to support continued growth as scope, responsibility, and impact expand at Radiant. The best of today’s advanced reactor builders don’t wait for job postings. They join the winning team. If that’s you, contact us directly for immediate opportunities: . We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. Unfortunately, we are unable to provide visa sponsorship at this time. This position involves access to technology that is subject to U.S. export controls. Any job offer made will be contingent upon the applicant’s capacity to serve in compliance with U.S. export controls. Compensation Range: $106,500 - $146,475

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Schedule: This is a 2nd shift position, Monday–Friday from 12:00 PM to 8:30 PM. Purpose The Robotic Assembly Technician is an essential part of the production team, responsible for operating and supporting automated robotic assembly equipment in a high-volume manufacturing environment. This role focuses on consistent production output, equipment reliability, and adherence to safety and quality standards within the Divergent Adaptive Production System (DAPS). The Role As a Robotic Assembly Technician, you will perform hands-on work operating robotic assembly cells, monitoring production processes, and keeping equipment running safely and efficiently. You will work directly on the production floor, supporting daily schedules, meeting output targets, and ensuring high-quality assemblies for automotive, aerospace, and defense products. Key Responsibilities: Operation & Production • Operate robotic assembly cells according to daily production plans., • Run start-up, dry runs, collision checks, and shut-down procedures., • Monitor part flow, cycle times, and machine performance to stay on schedule., • Make basic adjustments to equipment settings to maintain consistent operation., • Follow all work instructions, quality standards, and SOPs., • Assist with routine preventative maintenance tasks to reduce downtime., • Work with other technicians and operators to keep production running smoothly., • Support training of new team members when needed., • Follow all safety protocols around robotic equipment and moving machinery., • Help keep the work area clean, organized, and compliant with safety standards., • Report any unsafe conditions or concerns immediately. Basic Qualifications, • High school diploma or equivalent., • 1–3 years of experience operating industrial robots (Kuka, ABB, FANUC, Yaskawa) or automated equipment in a production setting., • Basic mechanical and electrical troubleshooting skills., • Experience in automotive, aerospace, or other high-precision manufacturing environments preferred., • Ability to lift up to 50 lbs and climb ladders as required., • Strong communication skills and a dependable work ethic., • Ability to follow SOPs and execute work with increasing independence., • Ability to lawfully access information and technology that is subject to US export controls Preferred Qualifications, • Experience operating Kuka 6-axis robots or similar robotic manipulators., • Familiarity with PLC-controlled equipment and HMI interfaces., • Experience with automated adhesive dispensing equipment., • Background in fast-paced, high-volume manufacturing. Work Environment, • Work near moving mechanical and robotic equipment., • Standing, bending, and hands-on tasks for most of the shift., • Occasional overtime or weekend work based on production needs., • TCH 01: $30.00 - $41.00/hour, • TCH 02: $35.00 - $48.00/hour, • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job Description This Safety Manager position is working Program-Wide with Los Angeles Community College District, at the BuildLACCD Program Management Office (PMO). • This position will be assigned as a District-Wide position., • Perform management oversight of construction activity on behalf of the client, report on contractor regulatory and contract safety compliance on multiple projects sites., • Monitor compliance to all current OSHA requirements that relate to the specific construction projects., • Perform daily safety reviews of work in progress in accordance with current Safety Regulations and Standard Operating Procedures (SOP) as developed and updated by BuildLACCD., • Monitor adherence to Owner Controlled Insurance Program (OCIP) requirements and procedures., • Support to the Program Safety Manager, including but not limited to, attending any required meetings, or providing safety reports/analysis as requested., • Attend construction meeting with college project team and general contractor. Leading the safety topic (toolbox), report on site observations (Observation Report) and review upcoming construction schedule for hazard preparedness., • Perform ongoing construction site safety inspections and generate daily safety report for all site visits., • Submit weekly Project Health Safety and Environmental Observation Report to College Project Manager., • Perform ongoing review, for completion and accuracy, of contractor safety submittals, JHA, MOP, Fall Protection Plans, Crane Lift Plans, Excavation and Scaffold Erecting Plans, Confined Space Entry and hazard assessment of other high risk operations., • Perform review of contractor submitted incident reports, participate in safety stand-downs, and prepare and submit lessons learned to Program Safety Manager., • Perform and document safety orientation with contractor safety representative., • Monitor adherence to zero tolerance and corrective action policy for workers found not in compliance with the Program’s safety policy., • Flexibility in schedule and transportation to work at multiple sites based on assigned schedule and duties throughout the greater Los Angeles area., • Ability to work in fast-paced environment, establish daily work priorities, and perform oversight at multiple active construction projects., • Good written and oral communication skills. Salary Range: $112,500 - $127,500 Requirements Minimum Qualifications: • 10 years' of commercial construction experience in the US with a General Contractor., • 5 years' experience in California with a Contractor or major subcontractor., • 2 years' experience in construction of educational projects in a campus environment., • Strong experience managing field construction teams on multiple projects., • Experience on demolition, renovation, and new construction building projects., • Experience working on OCIP programs., • All certificates and credentials must be active and current for consideration. Include a current copy of all certifications in resume package for verification., • Hold a valid Safety Management Specialist (SMS) certificate or Construction Health and Safety Technician (CHST) issued by the Board of Certified Safety Professionals (BCSP) or Certified Safety Manager Construction (CSMC) certificate issued by the National Association of Safety Professionals (NASP) - (include copy of certificate in resume package)., • Current First Aid/CPR/AED Certification - include copy in resume package for verification., • Experience on modernization/renovation projects involving abatement, remediation of hazardous materials, hazardous material waste removal and handling, such as asbestos and lead based paint., • Strong experience working senior management and field teams on large building programs across multiple sites and locations., • Experience participating in scheduled construction Meetings with Contractors and Project Managers., • Strong experience in safety incident reporting and daily construction reporting for multiple projects., • Ability to effectively communicate with Owner's Construction Management staff and Contractor's Site Management Team., • Ability to manage, control, and report safety incidents in a timely manner in accordance with OSHA regulations and Owner's Requirements., • Proficiency with Microsoft Office, Adobe Acrobat and other basic software programs used in Construction. Preferred Qualifications: • Construction management, safety management, safety engineer or related degree., • Additional safety/health certifications and credentials as appropriate for this position., • Current 40-Hour HAZWOPER., • Medical Insurance, • Dental Insurance, • Vision Insurance, • 401K Retirement Plan (optional), • Stock Options! 100% Employee Owned – Employee Stock Ownership Plan, • Safe Harbor Account: MAAS automatically contributes 3%, start accruing day 1, • 3 weeks Paid Time Off (2 weeks’ vacation, 1 week sick) and holidays, • Flexible Spending Account, • Family and Medical Leave

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. We encourage all levels, SR IC->Director, to apply! The factories-as-a-service team analyzes our current customers' production and supply chain challenges, builds data-driven presentations, designs and scopes factories of the future, and assists the Federal and Strategic sales team in forming long-term partnerships with the DOD, Primes, and other manufacturers. This specific team is responsible for scoping, design, cost, schedule, and technology analysis, as well as proposals for major programs and manufacturing transformations across all manufacturing methods and domains. With several major programs in flight, we are hiring rapidly for this team that will effectively analyze, design, scope, plan, and handover (or join) execution of large-scale manufacturing efforts. The Role: Lead Manufacturing Engineer, Sheet Metal - We encourage all levels, SR IC->Director, to apply! * This role will oversee drawing reviews, capital expenditure planning, and automation feedback for Sheet Metal as part of the Factories as a Service team. * The Hadrian Factories as a Service team works across all manufacturing methods, and this role is expected to serve as the Lead Engineer, responsible for scoping, designing, planning, and providing automation feedback for sheet metal across all material types and configurations. * You'll be able to rapidly review drawings for manufacturability and advise our automation team on sheet metal best practices, utilizing your deep working knowledge of production and inspection methods for sheet metal. * This role will both assist in building new factories for existing production scope, as well as contribute to the manufacturing processes of new products where Sheet Metal is a designed-in function. * You’ll recruit and lead 1-2 Sheet Metal MEs to assist, and work with Hadrian’s Automation and Factories Leadership teams to design and ship comprehensive sheet metal production and inspection lines. * We are looking for individuals who can assess drawings technically, as well as plan sheet metal lines or factories from the ground up, and are interviewing candidates at all experience levels. What You’ll Do: * Analyse customer drawings and current state of production to design, build, and guide automation of sheet metal DFM, Production, and Inspection Lines * Contribute as a key player in factories as a service efforts * Deliver cost/schedule/solutions in partnership with our customers and the Federal team * Own CapEx planning, vendor selection, and costing What We’re Looking For: * Senior Manager or above level who's technically in the weeds, with deep expertise in Sheet Metal production and inspection * Able to travel to assess factories 40% of the time * Capable of leading 1-2 sheet metal MEs * Able to analyse DFM, and design/plan production and inspection lines for sheet metal * Prior experience standing up new sheet metal lines in Aerospace, Automotive, or other domains * Ability to move quickly and make risk-adjusted decisions What Will Set You Apart: * Software or automation experience is not required, but helpful * Working knowledge of sheet metal technology and CapEx Benefits * Medical, dental, vision, and life insurance plans for employees * 401k * Relocation support may be provided for certain situations, based on business need. * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. The Role Hadrian is building the most advanced manufacturing platform in the world, and Workforce Development is the team responsible for ensuring our people can keep pace with it. At the center of that work is a system of documentation, skills tracking, and compliance content that the entire training program depends on. Without it, technicians cannot be trained, certified, or production-ready at the pace Hadrian requires. Workforce Systems is the central function within Workforce Development responsible for unlocking new capabilities and enabling scale across Hadrian's factories. As the pace and complexity of that work grows, we are looking for a Workforce Systems Specialist to own the execution that keeps it all running. We need someone who takes pride in accuracy and consistency, can translate raw capability knowledge into structured content across multiple systems, and understands that the work they produce has a direct impact on what happens on the factory floor. What You'll Do * Capability Knowledge Coding: Take raw capability information and structure it into the systems the workforce depends on, including skills matrix entries, standard documentation, written evaluations, and compliance course assignments. * Content Revisioning: Manage the revision process for existing documentation and system content as processes change, ensuring updates follow WFD revision control standards and are published accurately across all relevant systems. * New Process Documentation: Collaborate with Training Specialists and SMEs to understand new processes and develop accompanying documentation once a process has been cleared for technician handoff. * Trainee Handbooks: Collaborate with Training Specialists and SMEs to identify foundational knowledge requirements for each role and develop trainee handbooks that introduce key concepts. * Documentation Maintenance: Audit, reformat, and maintain training documentation across all active stations to ensure content meets current WFD standards. Publish approved documentation and manage access requests to maintain audit compliance. * Skills Matrix Administration: Enter, maintain, and update skills data and organizational requirements within the skills matrix platform based on defined processes and structures. * LMS Administration: Maintain existing compliance courses, enter and edit data as needed, and build e-learning content for compliance-related topics. * System Hygiene: Ensure documentation spaces, skills data, and certification records are consistently accurate, well-organized, and ready for internal and external audits. What We're Looking For * Attention to detail: you catch errors, inconsistencies, and gaps before they become problems. You understand that accuracy in documentation and systems data directly affects training quality and audit outcomes. * Knowledge translation: you can take raw or unstructured information from an SME, engineer, or governance team and convert it into clear, structured content across multiple systems. * Revision control: you treat documentation as a controlled asset. You manage updates through the proper process, ensure nothing is published outside of approved standards, and keep content accurate as things change. * Systems literacy: you pick up new tools quickly and work within multiple platforms with discipline, regardless of the specific system. * Organization: you can manage a queue of documentation requests, content builds, and administrative tasks without dropping items or losing track of status. * Communication: you can work with SMEs, Training Leads, and other partners to gather information, clarify requirements, and close open loops without needing heavy direction. What Will Set You Apart * Background in technical writing, instructional design, or LMS administration in a manufacturing, engineering, or regulated environment * Experience working with raw process data or engineering documentation as source material for training content * Familiarity with skills matrix platforms or structured competency frameworks * Experience in a role where documentation accuracy and version control were non-negotiable * A manufacturing or engineering background with a genuine interest in how knowledge gets structured and transferred * Familiarity with AS9100 or ISO documentation standards Benefits * Medical, dental, vision, and life insurance plans for employees * 401k * Relocation support may be provided for certain situations, based on business need. * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job Description IESE Solutions is seeking an experienced Senior Ground Segment Systems Engineer to support to the US Space Force (USSF) in developing, deploying, and sustaining a National Security Space system within the Space Systems Command (SSC) directorates. This position is located in El Segundo, CA where the system is developed and managed. Typical responsibilities include: • Help shape various systems architecting and engineering activities such as system requirements definition, design, interface management, data architecture development, verification and validation, integration, performance analysis, lifecycle cost analysis & estimation, decision analysis, and physical configuration assessments., • Support customer team execute and manage acquisition strategies, integration, and sustainment of cloud-based software systems with several unique mission partner systems., • Develop, assess, and manage ground segment technical and interface requirements. Manage interface negotiation with external stakeholders. Oversee requirements and interface verification., • Oversee, assess, and manage software product backlog to meet baseline and emerging requirements. Develop and provide recommendations to prioritize development, augment solutions, and improve developer implementations., • Ensure the logical and systematic conversion of product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints., • Support development of system engineering items such as CONOPs, requirements definitions (or features, themes, epics), system testing, algorithm document review, and interfaces to other application development efforts., • Support the development and refinement of acquisition strategies, identify program execution issues and provide recommendations. Requirements • Bachelor of Science in Engineering or relevant discipline and 18 years or more of experience (or 4 additional years of experience in lieu of degree)., • Experience with the following:, • Technical program management, systems engineering, and government acquisitions of Space Systems within the Space Control mission area., • Modern software development processes, such as containerization, orchestration, DevSecOps, and Agile methodologies., • Integration of key ground segment systems, such as a cloud-based Infrastructure, Platform as a Service (PaaS) baselines, and antennas., • "Zero-Trust" cybersecurity policies and implementation on software and hardware systems., • Experience with Software Systems Engineering, Design, and Architecture Development., • Experience with Software Systems Engineering, Design, and Architecture Development, Agile Software Development Techniques and Implementation, Continuous Integration and Continuous Deployment (CI/CD) Pipelines., • Must have an active Top Secret clearance with in-scope SSBI/T5 background investigation. Ability to obtain and maintain Sensitive Compartmented Information and Special Access Program accesses. Must be willing to consent to a polygraph. Benefits As a growing small engineering firm, IESE Solutions focuses on people and customers and delivery of uninterrupted high-quality work. Our approach to attracting and retaining highly qualified candidates is to provide an opportunity to help shape the firm's future and a competitive and flexible compensation package consistent with qualifications, security clearance eligibility, and roles. IESE Solutions offers a highly competitive salary and benefits package, including but are not limited to: • Company 401K Contribution (no employee contribution required) up to 10% of qualifying salaries, • Medical insurance, • Dental insurance, • Vision insurance, • Life and AD&D insurance, • Company paid Long-term Disability insurance, • Short-term Disability insurance, • Discretionary Performance Bonus, • Paid Time Off, including Holidays, Vacation, • Flexible Work Hours and supportive/collaborative work environment, • Continuous education sponsorship, • Career opportunities to participate in the next generation space sensing enterprise ground system integration, test and deployment and develop/enhance enduring professional skills and network. At IESE Solutions, salaries are determined by various factors including location, education, clearance, skills, and experience among others. IESE Solutions considers several factors when extending an offer of employment, including but not limited to the role and associated responsibilities, a candidate's work experience, security clearance, education/training, and key skills. IESE Solutions accepts applications on an ongoing basis and there is no deadline. IESE Solutions is an equal opportunity employer, fostering a culture of merit, diversity and inclusion.

Job DescriptionSalary: $70,000 - $100,000 Job Summary: This position is focused on the mechanical design, development, and manufacturing of stationary and mobile antenna systems and related equipment. Essential Job Duties and Responsibilities: • Works as part of an integrated product team under the direction of a lead Mechanical Engineer and Program Manager, • Provide effective design support during the conceptual and detailed design phases of a product development program, • Perform hands-on design and analysis, • Prepare and present design and analysis material during internal and customer design reviews, • Prepare detailed product manufacturing documentation such as test procedures and assembly instructions, • Support component and antenna system level environmental testing, • Interface with ThinKom production personnel and outside suppliers during the manufacturing phase of programs, • Support business development activities by providing input for proposals Skills and/or Experience Needed: • BS in Mechanical or Aerospace Engineering, • 2+ years of experience in the field of Mechanical Engineering and product design and development desired, but not mandatory, • Knowledge in the areas of materials, structural and thermal analysis, dynamics, vibration and mechanical shock, heat transfer, and finite element analysis, • Knowledge of metal fabrication techniques such as machining, sheet metal, and forming, along with some experience with injection molded plastics and cast metal part design preferred, but not mandatory, • Solid model design, geometric dimensioning and tolerancing, and detailed drawing experience, preferably using Creo or similar CAD software, • Technically proficient in MS Office products Other Abilities: • Must have excellent problem-solving abilities, • Ability to communicate clearly, both verbally and in written form, • Interpersonal skills to effectively work with ThinKom personnel as well as suppliers and customers, • Ability to effectively present information in team meetings and design reviews Additional Requirements: • Must be eligible to obtain and hold a US DoD Security Clearance in support of US Government contracts/ subcontracts, • Follow ThinKom corporate policies and design procedures Physical Demands: • Ability to travel up to 10% of the time, • This position uses a computer terminal to access, input, and retrieve data, • This position may be subject to interruptions that may cause a change in immediate priorities and/or work focus, • While performing duties of this position, employee is occasionally required to stand, walk, sit, stoop, reach, and/or bend, • May occasionally lift and/or move files or boxes up to 50 pounds, • May be subjected to occasional irregular or extended work hours, • May be required to sit for extended lengths of time, • Must be able to work in an environment that may be subjected to occasional loud noises, hazardous materials, chemicals and, electromagnetic energy Salary Range - $70,000 - $100,000 ThinKom offer generous benefits including: Medical, Dental, Vision, Disability, Life, 401k Matching (4%), PTO, paid Holidays and Bonus Plan. ThinKom Solutions is an Equal Employment Opportunity Employer. ThinKom Solutions is a Drug and Alcohol free working environment with a zero-tolerance policy.

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Purpose As an Additive Manufacturing (AM) Manufacturing Engineer, you will contribute to manufacturing engineering efforts across the development, build, and production lifecycle of advanced laser powder bed fusion (LPBF) and manufacturing systems. You will partner with cross-functional teams to optimize manufacturability, improve build reliability, and ensure our capital equipment systems meet cost, quality, throughput, and production targets. You will serve as the primary engineering support for multiple subsystems and support critical processes, tools, and workflows that scale us from prototype through production. The Role • Contribute to manufacturing engineering support across multiple LPBF subsystems (e.g., optics, recoater, gas flow, fluid systems) and/or advanced manufacturing modules., • Develop and continuously improve comprehensive work instructions and standard operating procedures for internal and external manufacturing., • Collaborate with design and R&D teams to enhance manufacturability at the component, assembly, and system level., • Conduct design for manufacturing (DFM) analyses to reduce cost and improve cycle time., • Support design changes through PLM, configurations, and change implementation., • Refine manufacturing processes, including assembly, integration, and test operations., • Design, evaluate, and optimize tooling, fixtures, and assembly jigs., • Lead root cause and corrective action (RCCA) activities for manufacturing-related issues., • Improve machine uptime by supporting preventive maintenance strategies., • Partner with supply chain to bring up production lines, support sourcing activities, and resolve supplier technical issues., • Contribute to associated and peripheral factory modules that complement the LPBF printer., • Support the implementation and adoption of enterprise tools like PLM, ERP, and MES systems., • Champion continuous improvement efforts across manufacturing documentation, process control, and product transitions. Basic Qualifications, • Ability to lawfully access information and technology that is subject to US export controls., • Bachelor's in Mechanical Engineering or related discipline., • 2+ years (Engineer II) or 5+ years (Sr. Engineer) of experience in mechanical engineering, electrical engineering, systems engineering, or manufacturing engineering, preferably in additive manufacturing, capital equipment, or low-volume/high-mix production environments., • Proficient in 3D CAD modeling and drawing creation., • Demonstrated expertise in work instruction development, process documentation, and tooling design., • Familiar with GD&T, tolerance analysis, and basic fabrication/assembly practices., • Experience with PLM systems (e.g., Teamcenter), ERP, and MES tools., • Strong cross-functional collaboration skills across engineering, production, and supply chain., • Adaptable and effective in a fast-paced, dynamic environment., • Hands-on skills in basic fabrication or assembly, • Ability to effectively operate and adapt in a fast-paced, open environment, • Strong communication skills, both verbal and written, • Ability to lift 50 lbs Preferred Qualifications, • Experience with NX CAD and Teamcenter PLM., • Exposure to LPBF additive manufacturing systems., • Understanding of configuration management for complex assemblies., • Background in supplier bring-up and technical issue resolution., • Familiarity with factory layout design and industrial engineering principles., • Experience working with MRP and MES systems. Work Environment, • This role is an on-site role at our Torrance office, manufacturing floor, and laboratory spaces. Compensation At Divergent, our pay range is based on the level of the job. For this role, we will consider candidates at levels Engineer II - Senior Engineer as evaluated through our interview process. • Engineer II / E04: $111,300 - $153,040, • Senior / E05: $128,520 - $176,720 Pay Range$111,300—$176,720 USD What We Offer: • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job DescriptionSalary: 100,000-135,000 ABOUT CITADEL CPM Citadel CPM is a California corporation, headquartered in Pasadena with offices in Fullerton, Long Beach, Riverside, and Sacramento, as well as Phoenix, Arizona. Citadel was established in 2006 to provide professional construction project management services to Federal, State, and municipal agencies in the justice, corrections, education, healthcare, infrastructure, and military market sectors. ABOUT THE TEAM Our team is dedicated to making our clients' vision a reality while delivering projects on budget, schedule, scope, and quality expectations.Our team iscommitted to resolving issues in a professional andcollaborative manner withintegrity always foremost in mind. We are proud to know that Citadel CPM is regarded as a team of reputable professionals that clients seek out to help them manage their construction projects, and thatindustry professionals aspire to join. Citadel's reputation has been built on a set of three principles that form our core values: Integrity, Professionalism, and Responsiveness. ABOUT THE ROLE Citadel CPM is in search of an experienced Project Engineer and Sr. Project Engineer to join our team. In this role, you will be working with a project team on the development and construction of various types of capital improvement projects. ABOUT YOU You are a Project Engineer with 7 years or a Sr. Project Engineer with 12 years of professional work experience in the management of construction projects including infrastructure and healthcare. With your expertise in coordinating construction efforts, mitigating risks, and presenting project data with clarity to stakeholders, you'll be at the forefront of innovation and excellence. BASIC QUALIFICATIONS • Experience with a large capital improvement program and familiarity with relevant public codes., • Provide technical and engineering support to project team including Project Manager/Construction Manager, • Coordinate with all project team members including contractors, architects, engineers, inspectors, consultants, end users, and other client staff., • Monitor and coordinate with surveying, testing and inspection staff., • Coordinate with and manage the architect for timely and accurate responses to requests for information., • Confirm contractors maintenance of record drawings prior to monthly progress payments., • Make field checks on scope of work of project to determine compliance with contract plans and specifications., • Document progress of scope of work, log progress photos, and complete daily reports and notes as required., • Log and track status of project change order proposals, field orders, and change orders., • Maintain project files and record drawings., • Perform other related duties as assigned and outlined in contract. PREFERED QUALIFICATIONS • Experience utilizing Building Information Modeling (BIM)., • Knowledge of Public Contracting Code., • Experience with Leadership in Energy and Environmental Design (LEED) certified projects., • Proficiency in web-based management and scheduling software., • Knowledge of various construction delivery methods including, Design-Build, Progressive Design-Build and Design-Bid-Build. EDUCATION REQUIREMENTS • BS/BA Degree in Engineering, Architecture, Business, Construction Management, Urban planning or related degree. Additional qualifying experience in excess to the minimum stated in the basic qualifications may be substituted for the required education on a year for year basis. Citadel is committed to a diverse and inclusive workplace environment. Citadel is an equal opportunity employer and does not discriminate based on race, natural origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. To request an interview accommodation please send an email to In compliance with the local law, we are disclosing compensation, or a range therefore for location where legally required. Actual salaries will vary based on several factors, including but not limited to external market data, internal equity, location, licenses, skill set, experience and/or performance. Pay range for the Project Engineer is $100,000 - $120,000 salary per year. Pay range for the Sr. Project Engineer is $110,000 - $135,000 salary per year. Featured Benefits Medical Insurance Vision Insurance Dental Insurance 401K Life and Long-Term Disability Insurances Paid Time Off (PTO) for personal time, sick days, and holidays Professional Development Reimbursement

Job Description About Castelion Castelion is bringing a new approach to defense development and production: one that focuses on short, iterative design cycles, rapid testing in development, and modern commercial manufacturing strategies for production at scale. Were designing, building, and testing next generation long range strike weapon systems to give America and its Allies a definitive edge and deter future conflicts. Software Security Engineer As a Software Security Engineer at Castelion, you will architect and implement the cryptographic foundations that secure our flight systems. You will own encryption, code signing, secure boot, and key management across embedded platforms, ensuring the integrity, authenticity, and confidentiality of mission-critical systems. You will work closely with embedded, avionics, and infrastructure engineers to integrate security directly into the full software and hardware stack from manufacturing provisioning through flight operations. We seek engineers who think in systems, understand threat models deeply, and can translate cryptographic principles into practical, resilient implementations in constrained environments. Responsibilities • Secure Boot & Root of Trust: Design and implement secure boot chains, hardware-backed root of trust mechanisms, and firmware verification processes for embedded flight systems., • Cryptography & Encryption: Develop and integrate cryptographic protocols and libraries (e.g., symmetric/asymmetric encryption, key exchange, digital signatures) for embedded and distributed systems., • Code Signing & Update Security: Own software signing infrastructure and verification workflows to ensure authenticity and integrity of firmware, flight software, and field updates., • Key Management & Provisioning: Design secure key generation, storage, rotation, and provisioning systems across development, manufacturing, and deployed environments., • Secure Communications: Implement and review authenticated and encrypted communication channels between vehicle, ground systems, and internal subsystems., • Threat Modeling & Hardening: Conduct threat modeling and security reviews across the software stack. Identify vulnerabilities and implement practical mitigations aligned with mission constraints., • Bachelors degree in Computer Science, Computer Engineering, Electrical Engineering, or related STEM field, • 3+ years of professional experience in software engineering with exposure to applied cryptography or security engineering, • Experience implementing encryption, authentication, or digital signature systems in C, C++, Rust, or similar systems languages, • Strong understanding of cryptographic fundamentals (PKI, TLS, key exchange, hashing, signatures), • Experience implementing secure boot or hardware root-of-trust mechanisms, • Experience with code signing pipelines and artifact verification, • Familiarity with TPMs, HSMs, or secure elements, • Experience in embedded, aerospace, defense, or other safety-critical systems, • Experience designing secure provisioning workflows in manufacturing environments, • Understanding of real-time systems and resource-constrained devices, • Bias to Action and Creative Problem Solving. Desire and experience questioning assumptions in ways that lead to break through ideas that are ultimately implemented. Successfully bring in applicable processes/concepts/materials from other industries to achieve efficiency gains. Ability to personally resolve minor issues in development without requiring significant support., • High Commitment, High Initiative. A successful candidate will have a genuine passion for Castelion's mission and consistently look for ways to contribute to the company's technical goals and prevent hardware blockers. Ability to work in a fast paced, autonomously driven, and demanding atmosphere. Strong sense of accountability and integrity. All employees are granted long-term stock incentives as part of their employment at Castelion. All employees receive access to comprehensive medical, vision, and dental insurance, and the company offers four weeks of paid time off per year.

Job Description INDUSTRIAL PRODUCT ENGINEER Gardena, CA | M-F | Onsite We’re seeking an Industrial Product Engineer to support the transition of products from design to production. This role focuses on ensuring manufacturability, maintaining accurate product data in PLM/ERP systems, and coordinating across Engineering, Operations, and Supply Chain to deliver production-ready solutions. Key Responsibilities • Convert design outputs into manufacturing-ready documentation (BOMs, routings, work instructions), • Support prototype, pilot, and production builds, • Ensure alignment with design for manufacturing and assembly (DFM/DFA), • Maintain and manage product data in PLM and ERP systems, • Coordinate across Engineering, Supply Chain, and Production to meet project timelines, • Identify and resolve industrialization and supply chain risks, • Support supplier selection and oversee prototype/pre-series builds, • Manage product configurations and ensure alignment with manufacturing capabilities, • Evaluate engineering changes (ECR/ECO) for cost, lead time, and production impact, • Bachelor’s degree in Engineering (Mechanical, Electrical, Industrial, or related), • 5+ years of experience in industrialization, NPI, or manufacturing/product engineering, • Experience with PLM and/or ERP systems, • Strong understanding of BOMs, routings, and technical drawings, • Organized and detail-oriented, • Able to manage multiple priorities, • Experience with complex or configurable products (high-mix, low-volume We're an equal opportunity employer. All qualified applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status, or any other characteristic protected by law. We offer a comprehensive benefits package including: • 401(k) & 401(k) matching, • Health Insurance, • Dental & Vision Insurance, • Life Insurance and AD&D, • Legal and identity theft protection, • AFLAC, • Paid Time Off & Holiday Pay, • HSA, FSA, • Paid Parental Leave, • Employee Assistance Program

Job DescriptionPurpose: We are seeking an experienced Audio Prep Technician (Engineer). This person is responsible for the quality control (QC), testing, and packaging of audio and intercom equipment in the NEP inventory. This is a full-time position onsite at our Van Nuys facility. This is Monday – Friday 9:00am – 6:00pm with some overtime and weekends as needed. Wage is $28 - $34 per hour based on experience. 3 - 5 years of experience in the industry. Audio/ RF Audio and Intercom Experience. Key Duties: • Testing and configuration of audio and intercom hardware, • Design and build packages based on client requirements., • Provide technical support to internal and external clients remotely and on site, • Perform repairs and upgrades as needed on various gear, • Working both independently and as part of a team Requirements: • Ability to install and troubleshoot audio and intercom devices, • Proficiency in Microsoft Office (Word, Outlook, Excel), • Ability to solve unusual or unexpected problems, • Effective communication skills are a must, • High school diploma or equivalent required, • 3-5 years of experience in the Broadcast, Sprots, and Entertainment Industry., • Audio/ RF Audio and Intercom Experience, • Able to deliver excellent customer service externally and internally Benefits: • Medical, Dental, and Vision coverage, • Vacation Days, • Sick Days, • 401(k), • Discount Programs, • Life Insurance, • Disability Insurance, • Employee Assistance Program, • Flexible Spending Account You might not know our name, but you’ve probably seen our work – on stage, on screen or on the field. Our technology solutions and unique Global Production Ecosystem empower content creators and rights holders to tell their stories in breakthrough ways. We’ve supported some of the world’s most watched productions and live events in sports, entertainment, concerts, festivals, film, TV and more. For 40 years our clients have trusted us to deliver live production, live events, and virtual production solutions for them, anytime, anywhere. Put simply, we bring content to life. Check us out at

Job DescriptionDescriptionAs a Senior Development Test Engineer at Impulse, you will be responsible for all aspects of test equipment design and test operations while working closely with a fast paced, agile team that produces high-performance spacecraft from clean sheet designs. Responsibilities • Design and build fluid, mechanical and electrical systems in support of liquid rocket propulsion and spacecraft systems testing, • Fully own key test assets and major test programs while collaborating with wide ranging teams across the company, including Redondo Beach and Mojave, • Coordinate with external vendors and contractors to meet project technical and schedule objectives, • Perform test setup, hardware inspections, checkouts and troubleshooting as needed, • Conduct test operations geared toward rapidly developing hardware for spaceflight, • Resolve technical issues with innovative and resourceful solutions Minimum Qualifications • Bachelor’s degree in mechanical, aerospace, electrical engineering or related field, • 5+ years of experience in hardware development testing, • Strong engineering fundamentals in thermal, structural, and fluids analysis, • Prior hands-on operational experience working with aerospace test facilities, • Previously demonstrated ownership of test stand design and build-up, • Able to create and clearly communicate fluid P&IDs, electrical and controls schematics, • Able to identify and procure appropriate test equipment, • Proficient with data acquisition and control methods, • Demonstrated ability of taking project ownership and working well in small teams Preferred Skills and Experience • Demonstrated prior experience working with complex systems including cryogenic propellants, high pressure gas systems, hydraulics and/or combustion devices, • Demonstrated working knowledge of components (valves, regulators, sensors, power supplies) and hands-on skills (tube fabrication, metalworking, wiring), • Demonstrated hardware testing experience with rocket engines, or spacecraft, • Experience in a startup or agile development environmentAdditional Requirements: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Mechanical Engineer - Healthcare Our Mechanical Engineering team is looking to add an experienced team member to our group of talented engineers. The Mechanical Engineer is a technical expert and high-level engineer who experienced in healthcare, responsible for technical execution, design leadership, and interdisciplinary coordination of complex mechanical systems. About HED We are a team that is full of ideas, experience, creativity, passionate opinions, insatiable curiosity, uncompromising integrity, commitment, and skill. Our culture is about aspiration, embracing change and challenges, listening to (and learning from) each other, encouraging continual learning, and inspiring collective growth. As an inclusive, integrated architecture and engineering practice, we value the diversity of perspectives, experiences, abilities, and expertise that advance both the work we do, and the world we share. Position Summary This role manages major portions of mechanical and plumbing scopes, guides QAQC efforts, mentors team members, and represents the discipline in client-facing settings. As trusted advisors, they represent the firm in client relationships, ensure technical excellence, and guide engineering strategy at the highest level. Their work influences practice-wide standards, design innovation, and technical mentorship. Essential Functions: • Lead the design and documentation of large-scale and complex mechanical systems—such HVAC, plumbing and/or fire protection systems - from concept through construction with minimal oversight., • Validate and approve key mechanical engineering calculations -such as load calculations, or refrigerant concentration limit calculations, plumbing system sizing, and equipment sizing - and integrate results into system design., • Resolve system conflicts during interdisciplinary coordination by collaborating with architectural, electrical engineering structural engineering, and civil engineering teams., • Serve as the primary mechanical technical contact across internal and external project teams., • Review and approve mechanical submittals, answer RFIs and evaluate substitutions; coordinate detailed responses with the broader team., • Perform site visits, field verification, and project walks with high autonomy; generate professional-level reports., • Provide mechanical design leadership from early concept through construction administration; make system selections, and documentation strategy., • Guide QAQC reviews for mechanical deliverables and assists in the development of project-specific mechanical quality plans., • Mentor support engineers and mechanical designers through delegation, technical feedback, and one-on-one coaching., • Develop onboarding content, technical training sessions, and reusable tools that support mechanical team development and consistency., • Participate in fee development, scoping, and resource planning for mechanical and plumbing scope in project proposals., • Lead internal and external project meetings by presenting mechanical system concepts, drive client decisions, and trade-offs., • Guide mechanical response strategies to field conditions, code conflicts, and VE proposals with clarity and ownership., • Influence client expectations around quality, performance, technical decisions, and lifecycle outcomes of mechanical systems. Requirements • Bachelor's degree in Mechanical Engineering, required., • P.E. licensure required., • 15+ years in the AEC Industry preferred., • Experience in designing systems for healthcare projects is required., • Familiar with ASHRAE 170 and FGI Guidelines is preferred., • An understanding of the financial status of projects as they progress, value of client relationships and deliver projects with a focus on the quality is required., • Healthcare Facility Design Professional Certification is a plus., • ASSE 6060 Medical Gas Certification is a plus., • Advanced written and verbal communication skills are required., • Strong organizational skills required., • Revit experience working regularly in the model is required., • Experience with computers, specifically for word processing, spreadsheet use/creation and email required., • Detail-oriented, self-motivated, enthusiastic, flexible and curious personalities required., • Prolonged periods of sitting at a desk and working on a computer., • Must be able to effectively communicate in writing and verbally via phone, video conferencing, and in-person., • Visual acuity to perform responsibilities. Work Environment • We embrace a hybrid model that promotes both autonomy and collaboration, including the freedom to work from home, with regular in-office days to connect with teammates and build culture., • The office is a professional, open-space environment for collaborative and independent work. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. #LI-DD1

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. The factories-as-a-service team analyzes our current customers' production and supply chain challenges, builds data-driven presentations, designs and scopes factories of the future, and assists the Federal and Strategic sales team in forming long-term partnerships with the DOD, Primes, and other manufacturers. This specific team is responsible for scoping, design, cost, schedule, and technology analysis, as well as proposals for major programs and manufacturing transformations across all manufacturing methods and domains. With several major programs in flight, we are hiring rapidly for this team that will effectively analyze, design, scope, plan, and handover (or join) execution of large-scale manufacturing efforts. The Role * This is the team that will restore forging to a core American industry * This role will oversee: CapEx and factory planning, workflow and automation planning, and material handling for Forging as part of the Factories as a Service team. * The Manufacturing Engineer for Forging will lead CapEx planning activities at a process level, and is responsible to coordinate the Tooling, Process, and Automation teams for development of part level SIPOC. * You’ll be able to rapidly review product drawings for manufacturability, take input from the tooling and process group(s) to select the right CapEx for manufacturing, process, handling, and inspection processes. Work within our automation team to advise on forging best practices and have a deep working knowledge of production and inspection methods for Forging. * This role will assist in building new factories for existing products and new programs, as well as contribute to the manufacturing processes of core products where Forging is a designed-in function. * We are seeking individuals who can analyze machine drawings and specifications at a technical level to determine manufacturing feasibility and efficiencies. You will plan, select, layout, and simulate new process and factory flows and will have ownership of the plant forging layout. We are conducting interviews at all levels. What You’ll Do * Analyze customer drawings and current state of production to design, build, and guide automation of Forging DFM, Production, and Inspection Lines. * Connect Tooling, Process, & Automation groups to determine manufacturing and inspection requirements to build a manufacturing plan. Specify and select appropriate CapEx to satisfy the manufacturing plan. * Contribute as a key player in Factories as a Service (FaaS) effort to build, edit, and scale forging capability thru maturation. * Deliver cost/schedule/solutions in partnership with our Supplier, Internal & External Customers, the Federal team, and the Executive Office. * Own CapEx planning, vendor selection, costing, delivery, and implementation schedules. What We’re Looking For * SME with deep expertise in metals forming production, automation, and material handling systems. * Able to travel ~25% to DOD and prime facilities * Able to analyze DFM, and design/plan production and inspection lines for Forming/Forging production. * Prior experience standing up new Forming/Forging capabilities in Defense, Aerospace, Automotive, Energy, or other critical infrastructure domains. * Ability to move quickly, make risk-adjusted decisions, and own the outcome of your work. * A self-directed IC that is comfortable working within ambiguity and without guardrails. * Reliance of the 1st principles of engineering to develop solutions in a structured, yet accelerated, pace. * A forward thinking, high character individual that possesses excellent communication skills and empathy for upward and downward collaboration and reporting. What Will Set You Apart * Working knowledge of forming/forging technology and metals processing. * Mechanical & Hydraulic machine design, thermal processing equipment, design of part handling systems. * Thermal & Vibration monitoring and dampening methods. * Machine vision and visual inspection techniques. * Software programming, simulation, or automation experience is not required, but helpful. * Demonstrated success in the design, plan, and execute stages of standing up metal forming production in a forging, mill, or foundry factory. * Working knowledge and understanding of factory infrastructure; such as, utilities, machine foundations, dust & waste collection and removal, rigging & lifting systems. * Applicable creative process in design & problem solving that is grounded in continuous improvement methodologies. * Practice the 5 C’s in your daily work – Character, Charisma, Candor, Creativity, & Collaboration. Benefits * Medical, dental, vision, and life insurance plans for employees * 401k * Relocation support may be provided for certain situations, based on business need. * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job DescriptionCX2 is a next-generation defense technology company founded to deliver spectrum dominance for the United States and our allies. CX2’s AI-enabled hardware and software platforms detect, disrupt and defend the electromagnetic spectrum across land, air, sea and space domains. CX2 is seeking a highly skilled Signal Processing Engineer to join our growing team. The ideal candidate has solid fundamentals in design, implementation and testing of signal processing techniques using MATLAB, Python and other existing frameworks. Experience in Defense is preferred. This role requires an onsite presence in our El Segundo, CA HQ; a remote work environment is not considered for this opportunity. Key Responsibilities • Digital Signal processing: Design, characterize, and deliver algorithms such as channelizers, frequency agile detection, adaptive filters, MIMO, wideband detectors, and other algorithms related to signal sorting, • Write and contribute to existing Python repositories using CUDA and/PyTorch, • Own requirements, ICDs, and verification from concept through delivery, • Stay current: Track and insert advances in signal processing techniques and associated technologies, adaptive beamforming, RF machine learning, and resilient PNT for GPS-denied ops. Required Qualifications, • Masters Degree in Electrical, Computer or Systems Engineering or related field with Graduate study emphasis in Signal Processing; OR a Bachelor’s Degree in an Engineering discipline with 3-5 years relevant working Signal Processing Experience, • Intermediate to advanced proficiency in Python, • Willingness to support critical test events that occasionally require extended hours/weekends., • Ability to obtain and maintain a security clearance. Learn more about Security Clearances here., • Must be a U.S. Person (see ITAR Regulations below) due to required access to U.S. export-controlled information or facilities Bonus Points, • PhD in Electrical Engineering, Computer Engineering, or related field, • 5+ years’ experience with EW subsystems and payloads., • EA/ECM technique design (deception, Digital RF Memory, coherent/non-coherent techniques)., • Comms system design (LPI/LPD, Waveform-of-Interest exploitation), • RF machine learning for emitter ID, modulation/classification, anomaly detection, PDW creation, • Tools Experience: ADS/AWR/SystemVue, MATLAB/Simulink, Python (NumPy/SciPy), GNU Radio/SDR (USRP/RFSoC), VITA-49; HDL/firmware experience also helpful (Vivado/Quartus/Libero)., • Clearance: Active Secret or ability to obtain and maintain; TS/SCI eligibility preferred. ITAR/EAR-controlled work., • Field work: supporting periodic travel for flight tests and customer demonstrations/support, • Mindset: Builder-tester who loves first-principles RF, rapid lab iteration, and getting hardware flying fast.ITAR Regulations, • To conform to U.S. Government export regulations, applicant must be a US Citizen, Green Card holder, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. What We Offer, • Competitive salary, stock options and benefits, including health, vision and dental., • 401K enrollment at 90 days., • Generous PTO + most Federal Holidays observed., • Collaborative and inclusive work environment., • Access to the latest tools and technologies., • High levels of responsibility and autonomy., • Professional growth and development opportunities.

Job Description Econolite® is an innovator of Intelligent Transportation System (ITS) solutions, products, and services. Our technology is helping save lives and making the Smart City a reality. If you want to be at the forefront of this intelligent technology revolution, we want to talk to you about being part of our team. Econolite is committed to employing the best talent that will make significant contributions to building a safer, connected world. Econolite’s ITS solutions ease traffic congestion, provide safer mobility, and improve quality of life. As the one-stop-shop leader for traffic management systems, sensor products, and services, Econolite is committed to the advancement of connected and autonomous vehicles, smart cities, and cybersecurity. Under the direction of the Senior Manager of Test and Support Engineering, the Senior Traffic Applications Engineer serves as a subject matter expert in traffic engineering, traffic operations, and detection technologies, leading testing and validation efforts for Econolite’s traffic control and detection products. This role is responsible for testing advanced systems, analyzing complex customer applications, troubleshooting field issues, and ensuring products meet industry standards and operational requirements. This role will collaborate closely with development, product management, and systems engineering teams to influence product direction and feature implementation. With a strong background in traffic signal operations and detection system performance, the ideal candidate will also drive continuous improvement in testing methodologies and application support, helping to shape the future of Econolite’s traffic management and detection solutions. DUTIES: • Lead the creation and execution of comprehensive test plans and test cases for embedded software across Econolite’s traffic controller and detection product lines., • Apply expert knowledge of traffic engineering principles, signal operations, and user behavior to develop realistic and high-impact test scenarios., • Evaluate and troubleshoot detection product performance, including radar and video-based systems, using a strong understanding of analog/digital signals and network topologies., • Work closely with engineers, product managers, project/program managers, and other team members throughout all stages of product development., • Review customer specifications and field configurations, identifying gaps and proposing design-level solutions to meet or exceed performance and operational requirements., • Bachelor’s degree in Civil Engineering (Transportation), Electrical Engineering, or a related technical discipline, or equivalent demonstrated technical experience., • 7+ years of hands-on experience in traffic engineering, traffic signal operations, or detection systems, with progressive responsibility in technical roles., • Proven expertise in traffic controllers, sensor technologies (radar and video), and signal turn-on/configuration procedures., • Strong working knowledge of interpreting and troubleshooting electronic schematics, wiring diagrams, and field network topologies (including TCP/IP, VLANs, and routing/switching environments)., • Proficiency in Linux and Windows environments, with experience using diagnostic tools such as Wireshark, logic analyzers, or serial/network monitors., • Experience working directly with customers or agencies, providing field support, troubleshooting, and technical resolution., • Experience in test automation and scripting (e.g., Python, C, or C++) is a significant plus. COMPENSATION The base pay range for this full-time exempt position is $100,000.00 - $125,000.00 per year plus benefits. Pay ranges are determined by various factors, including role, experience, and location. The pay range displayed reflects the minimum and maximum target for new hire base pay rates for this position. Within the range, actual individual compensation is determined by various factors, including location, job-related skills, experience, and relevant education or training. PHYSICAL REQUIREMENTS Primarily an office-based role with occasional work in lab or field environments. Must be able to lift up to 25 pounds and travel to customer or company sites as needed. BENEFITS This role is eligible for benefits: weekly pay, weekly PTO accrual, paid holidays. Various medical plans, dental, vision, flexible spending accounts, direct deposit. Basic life, LTD, 401k discretionary match. Pet insurance, identity theft protection. DISCLAIMER The above statements are intended to indicate the general nature and level of work performed by employees within this classification. They are not designed to contain or be interpreted as an exhaustive list of all duties, responsibilities, skills, and qualifications required of employees assigned to this job. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities and veterans to apply to all of our job openings. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, marital status, lactation, ancestry/national origin, citizenship, age, disability, arrest and court records, military & veteran's status, Genetic Information & Testing, Family & Medical Leave, or any other classification protected by state or federal law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination. An Equal Opportunity Employer - Non-Smoking Facility

Job Description Location: Los Angeles, CA Overview The Forward Deployed Software Engineer (FDSE) will be the ultimate problem solver, an elite member of First Resonance's "Delta" FDSE, being deployed to our customers' sites to overcome their most demanding challenges. In this role, you will be working hand-in-hand with customers by getting deeply involved in their operations, understanding their unique problems, and developing tailor-made solutions that integrate seamlessly with ION. Fired up to support eVTOLs, rockets, robots, and autonomous vehicles makers? As an FDSE, you will directly impact our customers’ ability to achieve these goals by interpreting their needs, developing software solutions from concept to delivery, and ensuring a high level of customer satisfaction. Your days could range from working with a customer's engineers to design a new feature that automates a laborious process to being the point person in debugging an issue blocking their production team. Responsibilities & Duties * Serve as a deployed technical expert, providing hands-on assistance with the implementation, usage, and further development of ION. * Collaborate with customers to understand their most pressing problems to develop coherent strategies & intelligent solutions (build custom web apps, wrangle large-scale data, etc) * Have total ownership in developing and managing the delivery of solutions, while maintaining high levels of customer satisfaction. * Write clean, scalable, and easily maintainable code across the stack * Work in small teams, taking ownership of end-to-end execution of high-stakes projects * Collaborate with the First Resonance team to continuously improve the product based on customer feedback and requirements. Minimum Qualifications & Skills * Strong engineering background in fields like Computer Science, Mathematics, Software Engineering, Physics, or Data Science * Excellent communication and interpersonal skills, with a strong ability to build relationships with different stakeholders (customers, their leadership and First Resonance teams) * Experience shipping production quality code * Ability to collaborate effectively with both technical and non-technical individuals in dynamic environments * Willingness to travel up to 40% to customer sites, as needed. Desired Qualifications * Experience in manufacturing, as Product Manager, or Lead Engineer * Experience with Python and/or React (Typescript) * Experience or curiosity in working with large-scale data to solve customer-facing problems * Comfortable working in a fast-paced, startup-like atmosphere with an entrepreneurial spirit Benefits & Perks * Health Insurance; medical, vision, dental, & life insurance. * Paid Parental Leave. * Employee Stock Option Plan. * Team outings, group lunches, open office, happy hours. * Paid holidays, sick days. * Flexible Friday and PTO. * 401K. First Resonance is an equal opportunity employer dedicated to building an inclusive and diverse workforce. First Resonance participates in E-Verify. As part of our onboarding process, a new hire's Form I-9 information will be shared with the federal government to confirm they are authorized to work in the U.S. Pay is based on factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience and skillset, and location. First Resonance accelerates the speed and reliability of hardware development for companies manufacturing the next generation of hardware products. This includes space exploration, electric airplanes, autonomous vehicles, nuclear reactors, robotics, and more. We are a group of software, hardware, and manufacturing engineers that are bringing the best of modern UX and data science to an industry that has been overly rigid in its innovation. We are removing the barriers preventing radical advancement by providing tools to manufacturing engineers and operators to move information more freely, collaborate with their teams more easily, and use the power of data to predict problems and provide insights that result in better hardware quality and delivery. Compensation Range: $145K - $175K

Job Description About the Company Mission Microwave Technologies was founded in 2014 to revolutionize the next generation of Solid-State Power Amplifiers (SSPAs) and Block Upconverters (BUCs). We leverage advanced GaN transistors, proprietary power-combining techniques, and innovative full-system designs to deliver the industry’s most efficient, compact, and lightweight high-power SSPAs. With more than 100 years of combined leadership experience supplying high-performance, high-reliability RF solutions to commercial, military, and space customers, Mission Microwave has grown rapidly over the past decade and is backed by a private equity firm committed to long-term innovation and expansion. We are proud to be ranked #23 on Fortune’s Best Workplaces in Manufacturing & Production and to have been recognized as a Great Place to Work® since 2022. Mission Microwave is headquartered at 6060 Phyllis Drive, Cypress, CA 90603. About the Role As an RF Engineer with a focus on linearization and system-level optimization, you’ll design, model, and validate advanced RF and microwave subsystems that power mission-critical communication and high-reliability applications. You’ll take ownership from concept through production—driving circuit design, simulation, integration, and verification to ensure exceptional performance, efficiency, and linearity across high-power RF systems. You’ll collaborate closely with product development, test, manufacturing, and quality engineering teams to convert breakthrough concepts into scalable, manufacturable hardware. Your work will directly influence the performance, yield, and field reliability of products operating in the world’s most demanding environments. What You’ll Do • Design innovative pre-distortion and linearization techniques for power amplifier (PA) modules., • Generate cascade analyses to drive system-level architecture and performance decisions., • Perform electromagnetic, RF, and microwave simulations using tools such as ADS, AWR, HFSS, and CST., • Design and simulate RF/microwave circuits and subsystems—including power amplifiers, up/down-converters, T/R modules, synthesizers, filters, and mixers—to meet system specifications., • Specify, source, and evaluate RF components for high-power, high-frequency, high-reliability environments., • Collaborate with mechanical, thermal, manufacturing, and quality engineering teams to ensure designs are robust, manufacturable, and compliant with reliability and production standards., • Develop test plans, configure measurement systems (VNAs, spectrum analyzers, signal generators, power meters), and characterize prototypes for performance, linearity, efficiency, gain, noise figure, stability, thermal behavior, and power output., • Prepare design documentation, test reports, failure analyses, and manufacturing support materials., • Support New Product Introduction (NPI) efforts—design reviews, transfer to production, prototype builds, and issue mitigation during ramp-up., • Troubleshoot and resolve design, test, reliability, and manufacturing challenges, providing corrective actions and continuous improvement recommendations., • Stay current on emerging RF/microwave technologies and contribute to technology roadmaps and process improvement initiatives. What You Bring • Bachelor’s degree in Electrical Engineering or a closely related discipline., • Hands-on experience designing, simulating, producing, and validating RF/microwave circuits and subsystems., • Proficiency using RF test equipment including VNAs, spectrum analyzers, oscilloscopes, signal generators, and power meters., • Programming experience in Python, MATLAB, R, and/or C++., • Proficiency with RF simulation tools such as Microwave Office, ADS, HFSS, CST, or equivalent., • Strong math skills, including calculus and spatial reasoning., • Self-driven, results-oriented, and comfortable in a fast-paced engineering environment., • Strong ownership, responsibility, and ability to maintain confidentiality., • Excellent communication skills, both verbal and written, with the ability to work across organizational levels. Education & Experience • Bachelor’s degree in a relevant technical field., • Minimum of 3 years of direct experience in RF design, simulation, and testing., • Electronic Warfare (EW) or radar experience is a plus., • Experience with embedded systems is a plus. At Mission Microwave, you don’t just take a job; you step into a mission that matters. We design and build world-class RF and microwave solutions that power the technologies behind defense, space, and next-generation communications, and we do it with precision, purpose, and pride. Here, your ideas are heard, your expertise is trusted, and your impact is visible from the first design review to the moment our products perform in the most demanding environments on Earth and beyond. You’ll work alongside intelligent, driven people who care deeply about craftsmanship, collaboration, and doing the right thing, in a culture that values growth, integrity, and human connection as much as technical excellence. If you’re looking for a place where your work truly matters, where you can stretch, learn, and build something extraordinary with a team that has your back, Mission Microwave is where your next chapter begins. Apply Now. Mission Microwave is proud to be an Equal Opportunity Employer. We are committed to treating all employees and applicants with respect and dignity, and to maintaining a workplace free from unlawful discrimination and harassment. All qualified applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, or any other characteristic protected by federal, state, or local laws. Mission Microwave maintains a drug-free workplace and conducts pre-employment background checks and, where permitted by law, substance-abuse testing. Many of our roles support U.S. Government programs and require the ability to obtain and maintain a security clearance. Security clearances may only be granted to U.S. citizens. Applicants who receive a conditional offer may be subject to government security investigations and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that Mission Microwave may share your application materials, including your resume and any related personal information or documentation, with its subsidiaries or affiliated partners strictly for the purpose of evaluating you for current or future employment opportunities.

Job Description BKF is a multi-service infrastructure consulting firm providing civil engineering and surveying services across California, the Pacific Northwest, and beyond. With offices throughout California and the Portland area, BKF has served transportation, water resources, land development, government, and federal clients for over 110 years. At BKF, you’ll find a unique opportunity to grow your career with intention. Our culture values professional autonomy, innovation, and meaningful collaboration across offices. We are proud to be recognized with the Great Place to Work certification for the second year in a row. We’re looking for a Project Manager with 10+ years of experience in civil engineering and a California Professional Engineering (P.E.) license to lead Transportation Infrastructure projects in Southern California. This role is ideal for someone who thrives in client-facing leadership, enjoys mentoring teams, and is passionate about delivering impactful transportation solutions. You’ll collaborate across BKF teams to manage project delivery, strengthen client relationships, and anchor our transportation presence in the region. Responsibilities • Lead design and project management for transportation infrastructure projects, including roadway improvements, traffic studies, and rehabilitation initiatives, • Coordinate permitting, technical studies, and client communications to ensure smooth project execution, • Leverage internal talent and build a local network to support scalable project delivery, • Champion quality, innovation, and continuous improvement in transportation engineering, • Mentor junior staff and demonstrate leadership potential to grow a local team, • Promote BKF’s full range of services and actively cross-sell to regional clients, • Bachelor’s degree in Civil or Environmental Engineering or related field, • California Professional Engineer (P.E.) license is required, • 10 years of experience in transportation infrastructure, including design and project management of roadway, transit, or related civil projects, • Strong background in transportation design, including roadway geometry, traffic control, grading, and utility coordination, • Proven ability to lead planning studies, master plans, and infrastructure projects from concept through delivery and completion, • Excellent interpersonal and communication skills to engage with new and existing clients, internal teams, and stakeholders, • Demonstrated success in building client relationships and strategic positioning for project opportunities, • Entrepreneurial drive to pursue new transportation projects and establish a local presence, with the potential to grow and lead a small team Work Conditions: Exposure to constant or intermittent sounds at a low or moderate level consistent with an office setting. Exposure to high-stress, fast-paced, deadline-oriented environment. Travel to other BKF locations and client sites may be required. Benefits • The typical base salary range for this position is $123,000.00 - $175,000.00 annualized depending upon skills, experience, education, and geographical location. This is an hourly position paid bi-weekly., • Competitive salaries, end of year bonuses, profit sharing, and 401k., • BKF pays 100% of the premiums for medical, dental, and vision coverage and 50% for your dependents., • Generous vacation and sick time packages., • 8 Paid Holidays., • Flexible schedules., • Education reimbursement, Paid annual dues for professional and societal organizations. BKF Engineers does not accept unsolicited resumes from recruiters or employment agencies. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement and a specific solicitation for the position or other approved engagement request for the position with BKF Engineers, BKF Engineers reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited submittals are done at the risk of the recruiter. #LI-Hybrid

Job Description About the Company Mission Microwave Technologies was founded in 2014 to revolutionize the next generation of Solid-State Power Amplifiers (SSPAs) and Block Upconverters (BUCs). We leverage advanced GaN transistors, proprietary power-combining techniques, and innovative full-system designs to deliver the industry’s most efficient, compact, and lightweight high-power SSPAs. With more than 100 years of combined leadership experience supplying high-performance, high-reliability RF solutions to commercial, military, and space customers, Mission Microwave has grown rapidly over the past decade and is backed by a private equity firm committed to long-term innovation and expansion. We are proud to be ranked #23 on Fortune’s Best Workplaces in Manufacturing & Production and to have been recognized as a Great Place to Work® since 2022. Mission Microwave is headquartered at 6060 Phyllis Drive, Cypress, CA 90603. About the Role As an RF Engineer, you will help architect, design, and validate the advanced RF and microwave subsystems that enable mission-critical communications across aerospace, defense, and satellite markets. You’ll own the entire development lifecycle—from concept, simulation, and circuit design to integration, verification, and production support—ensuring that every subsystem meets the rigorous performance, reliability, and environmental standards our customers demand. Working closely with cross-functional engineering, manufacturing, test, and quality teams, you’ll turn innovative concepts into robust, scalable, production-ready hardware. Your work will directly influence the performance, manufacturability, and long-term reliability of high-power, high-frequency systems deployed in some of the world’s most challenging environments. What You’ll Do • Design innovative quasi-optical and spatial power-combining architectures., • Prepare documentation including design reports, test results, root-cause analyses, failure reports, and manufacturing support materials., • Collaborate cross-functionally with mechanical, thermal, manufacturing, and quality engineering teams to ensure designs are robust, manufacturable, and aligned with reliability and production standards., • Support new product introduction (NPI) efforts—design reviews, manufacturability assessments, prototype builds, and issue resolution during production ramp-up., • Troubleshoot and resolve issues related to design, testing, reliability, and manufacturing, providing corrective actions and continuous improvement recommendations., • Hands-on experience designing, simulating, producing, and validating RF/microwave circuits and subsystems., • Proficiency using RF test equipment including network analyzers, spectrum analyzers, oscilloscopes, signal generators, and power meters., • Bachelor’s degree in a relevant engineering field., • Minimum of 3 years of direct experience in RF hardware design and measurement., • Electronic Warfare (EW) or radar experience is a plus. Mission Microwave is proud to be an Equal Opportunity Employer. We are committed to treating all employees and applicants with respect and dignity, and to maintaining a workplace free from unlawful discrimination and harassment. All qualified applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, or any other characteristic protected by federal, state, or local laws. Mission Microwave maintains a drug-free workplace and conducts pre-employment background checks and, where permitted by law, substance-abuse testing. Many of our roles support U.S. Government programs and require the ability to obtain and maintain a security clearance. Security clearances may only be granted to U.S. citizens. Applicants who receive a conditional offer may be subject to government security investigations and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that Mission Microwave may share your application materials, including your resume and any related personal information or documentation, with its subsidiaries or affiliated partners strictly for the purpose of evaluating you for current or future employment opportunities.

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Purpose The Material Planner supports production readiness by planning material requirements, releasing supply from blanket purchase orders, and managing the flow of materials through vendors. This role works closely with Production, Engineering, and Procurement to ensure materials are available to support stable, reliable schedules. The Role Material Planning & Schedule Stabilization • Develop and maintain material plans that support production schedules, minimizing production delays., • Release material from blanket purchase agreements based on demand signals, consumption trends, and agreed‑upon production schedules., • Coordinate with suppliers to ensure timely deliveries that support stable production plans., • Manage the flow of sub-components through vendors to deliver end items to support the production schedule., • Resolve shortages, supplier delays, or quality issues promptly to protect production schedules., • Contribute to cost‑reduction initiatives through improved planning accuracy and cross‑functional coordination., • Review ECOs to understand material, BOM, and process impacts., • Conduct impact analysis to determine inventory exposure, transition timing, and potential effects on production schedules., • Procurement manages strategic supplier relationships, including pricing, contracts, MOQs, and long‑term performance., • Maintain compliance with ITAR/EAR and DFARS regulations., • The Planner manages operational execution, including:, • Releasing supply from blanket purchase orders., • Confirming and tracking delivery dates., • Monitoring short‑term supply risks., • Advise the Buyer to any shortages in the negotiated supply., • Assist in the development and preparation of vendor KPIs., • Keep leadership advised of risks or opportunities that may affect the agreed upon production schedule.Basic Qualifications, • Ability to lawfully access information and technology that is subject to US export controls, • Must meet the definition of a US Person, • Experience in a ITAR/DFAR environment, • Bachelor's degree., • Ability to plan into the future and execute to established plans., • Excellent exception management skills., • Ability to work with ambiguity and condensed timelines., • Must have strong analytical skills and the ability to extract and communicate fact patterns impacting supply., • Experience with Outlook, Excel and ERP systems., • Ability to work in a cross functional group.Preferred Qualifications, • Bachelor or masters degree in mechanical or industrial engineering, business and/or with supply chain related major., • 5+ years of previous supply chain related experience., • Experience in the automotive arena., • Advanced Excel and Power BI., • Experience with Oracle Fusion ERP, • APICS Certification (CPIM, CSCP)Work Environment, • This role operates in both office and manufacturing floor environments, requiring occasional interaction with production teams to address planning and operational needs., • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job Description BKF is a multi-service infrastructure consulting firm providing civil engineering and surveying services across California, the Pacific Northwest, and beyond. With offices throughout California and the Portland area, BKF has served transportation, water resources, land development, government, and federal clients for over 110 years. At BKF, you’ll find a unique opportunity to grow your career with intention. Our culture values professional autonomy, innovation, and meaningful collaboration across offices. We are proud to be recognized with the Great Place to Work certification for the second year in a row. We’re seeking a Senior Project Engineer with expertise in transportation, civil infrastructure to support our well rooted Newport Beach office. This mid-level role is ideal for a California licensed P.E. with 4+ years of experience who enjoys leading technical delivery, mentoring junior staff, and contributing to impactful public infrastructure projects. You’ll work closely with project managers and multidisciplinary teams to deliver roadway, highway, and multimodal corridor projects - helping shape the future of transportation across the region. Responsibilities • Lead technical design and delivery of transportation projects, including roadway rehabilitation, new alignments, retaining walls, curbs, traffic improvements, wildlife crossings, highways, roundabouts, and corridors, • Organize project workflows, establish design criteria, and delegate tasks to junior staff, • Make decisions on specific project elements and consult with senior leadership on complex issues, • Support QA/QC implementation and identify out-of-scope services, • Mentor junior engineers and provide technical guidance across teams, • Assist in coordinating sub-consultant work and ensure cohesive project execution, • Attend project meetings and represent BKF as a secondary point-of-contact, • Contribute to proposal development and cross-sell BKF’s services to regional clients, • Bachelor’s degree in Civil Engineering or a related field from an ABET-accredited program, • California Engineer-in-Training (E.I.T.) certification; candidates with a Professional Engineer (P.E.) license will be prioritized, • Minimum 4 years of experience in transportation infrastructure design and project delivery, • Strong background in roadway and highway design, including staged construction and controls, • Familiarity with Caltrans standards, permitting processes, and public agency coordination, • Proficiency in geometric design and AutoCAD/Civil 3D and project management tools, • Excellent communication and collaboration skills, both verbal and written, • Occasional travel required between BKF offices and client site Physical Demands: Must be able to regularly talk, hear and operate a computer, keyboard and mouse and occasionally lift, pull/push and carry up to 20 pounds with accommodations. Work Conditions: Exposure to constant or intermittent sounds at a low or moderate level consistent with an office setting. Exposure to high-stress, fast-paced, deadline-oriented environment. Travel to other BKF locations and client sites may be required. Benefits • The typical base salary range for this position is $103,000.00 - $142,000.00, annualized depending upon skills, experience, education, and geographical location. This is a salaried position, paid bi-weekly., • Competitive salaries, profit sharing, and 401k., • BKF pays multiple of the premiums for medical, dental, and vision coverage and 50% for your dependents., • Generous vacation and sick time packages., • 8 Paid Holidays., • Flexible schedules., • Education reimbursement, Paid annual dues for professional and societal organizations. BKF Engineers does not accept unsolicited resumes from recruiters or employment agencies. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement and a specific solicitation for the position or other approved engagement request for the position with BKF Engineers, BKF Engineers reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited submittals are done at the risk of the recruiter. #LI-Hybrid

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Purpose Divergent is transforming manufacturing through our Adaptive Production System (DAPS), revolutionizing how complex structures are designed, built, and assembled. We are seeking a highly experienced Senior Metrology & Inspection Specialist to lead inspection strategy and quality assurance across advanced manufacturing processes. This role requires independent judgment, deep expertise in metrology and GD&T, and the ability to influence inspection standards across teams. In addition to executing complex inspections, this position will drive process improvement initiatives and serve as a mentor across disciplines. The Role Precision Inspection & Measurement Execution • Execute visual, dimensional, and functional inspections on complex machined and additively manufactured components using advanced metrology tools., • Interpret engineering drawings and GD&T (ASME Y14.5) to develop and apply robust, fit-for-purpose inspection strategies., • Independently determine and implement inspection methodologies across first article, in-process, and final inspections., • Document and escalate non-conformances in compliance with AS9102, internal quality procedures, and regulatory standards., • Define and refine inspection strategies for additive-to-machined transitions, custom fixturing, and complex geometries., • Serve as a cross-functional partner to production and engineering teams, providing actionable insights to improve part quality and upstream processes., • Contribute to root cause analyses, corrective/preventive actions (CAPA), and internal audits., • Lead initiatives that enhance inspection consistency, reduce variability, and increase efficiency., • Mentor inspectors, machinists, and engineers in blueprint interpretation, metrology best practices, and GD&T application., • Promote a culture of quality and precision through structured coaching and knowledge sharing., • Lead onboarding or training initiatives to strengthen the technical capabilities of the inspection team. Basic Qualifications, • 7+ years of experience in high-precision manufacturing (e.g., aerospace, defense, automotive), • Demonstrated mastery of GD&T (ASME Y14.5) and real-world application of inspection techniques, • Expert proficiency in using and selecting metrology tools based on part geometry and tolerances, • Track record of mentoring others and elevating team inspection standards, • Experience with AS9102 FAI documentation, NCRs, and quality system protocols, • Proven ability to influence process improvements and inspection methodology, • Ability to lawfully access information and technology that is subject to US export controls Preferred Qualifications, • Familiarity with non-contact metrology systems (e.g., laser scanners, structured light), • Working knowledge of QMS standards (AS9100, ISO 9001), • Experience with additive manufacturing, CNC machining, and transitioning from prototype to production, • Proficiency with digital tools like NX, Teamcenter, or equivalent PLM/CAD systems Work Environment, • This is a hands-on technical role for an inspection expert who thrives in a high-precision manufacturing environment, ensuring quality and driving continuous improvement in metrology practices. Compensation, • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Principal Launch Vehicle Design Engineer II to our team. If you enjoy working in a startup environment, and have expertise in the structural and thermal design of launch vehicle (LV) components and systems, including tanks, fairings, and related hardware, we would like to hear from you In this position, you serve as a subject matter expert, overseeing subsystem development from concept through flight, while ensuring compliance with performance, safety, and reliability requirements. This role requires both deep technical expertise and the ability to guide and mentor engineering teams within a fast-paced start-up environment. The ideal candidate will have a strong background in FEA and thermal simulations, combined with hands-on experience in experimental development and testing of high-performance aerospace systems. This role involves close collaboration with an international R&D team to optimize performance and reliability of LV hardware.JOB DUTIES AND RESPONSIBILITIES • Lead the design, analysis, and development of primary and secondary launch vehicle structures, stage interfaces, and payload accommodations., • Perform static and transient structural and thermal analysis of LV components and systems to ensure mechanical integrity under operational loads., • Develop and execute test programs, analyze experimental data, and apply findings to optimize designs., • Prepare CAD models for FEA analysis and manufacturing., • Generate technical documentation, including reports, specifications, and contributions to PDRs and CDRs., • Collaborate across mechanical, aerospace, and controls engineering teams to deliver flight-ready systems., • Mentor junior and senior engineers to build technical understanding and professional development., • Participate in mission operations, anomaly investigations, and continuous improvement initiatives.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Master’s degree in Mechanical Engineering, Aerospace Engineering, or a related field., • 11+ years of industry experience in aerospace design and analysis., • Expertise in Ansys tools: Mechanical, Explicit Dynamics (LS-Dyna), Linear and Nonlinear Eigenvalue Buckling, Harmonic Response, and Random Vibrations., • Proficiency in MATLAB for programming, data analysis, and optimization., • Proficiency in CAD tools (SolidWorks, NX)., • Strong foundation in systems engineering principles, requirements flowdown, and integration., • Hands-on experience with hardware development, testing, and qualification., • Strong analytical and problem-solving skills with close attention to detail., • Excellent written and verbal communication skills.PREFERRED EXPERIENCE, • Prior experience with cryogenic systems, liquid rocket systems, and LV components., • Hands-on experience designing and improving LV hardware., • Knowledge of manufacturing and technological processes for aerospace parts., • Familiarity with aerospace safety and reliability practices.

Job Description Essel is looking for a Mid to Senior Level Solid Waste Engineer to manage and work on diverse solid waste projects. In this role you will help manage projects, developing proposals and will also be directly involved with public and private clients in marketing, client management, and project production. Responsibilities include project management, business development, and staff development. Project responsibility will have a primary focus on solid waste management, including landfill gas, landfills and landfill infrastructure, composting, and other projects, which may require design, engineering, permitting, construction and/or operations support. You can be hybrid out of our San Diego, Long Beach, Pleasanton, or Sacramento office. Remote work might also be considered if you live in California. • Apply intensive and diversified knowledge of engineering and scientific principles and practices in solid waste assignment areas and related fields., • Prepare engineering calculations, drawings, reports, and permit applications., • Make decisions independently on engineering or scientific problems and methods, plans and coordinate work, and represent us at meetings and conferences., • Field work performed by high/driving in varied terrain and weather will be required, including but not limited to, surveys/data gathering, CQA liner installations, inspections, etc., • Office-based tasks including: CAD drafting, mathematical calculations, report writing, creating site plans and facility diagrams, and permit applications., • Business development including: proposal preparation, meeting with clients, and attending industry-related conferences/trade shows., • Bachelor’s degree in relevant engineering field required., • Minimum of 6 years of relevant working knowledge/demonstrated consulting experience with projects specific to the solid waste industry, including:, • Landfill gas management, air compliance, and landfill design and permitting is required., • E.I.T. required and California P.E (civil) registration or ability to obtain within 6 months preferred., • Medical, dental, vision, 401K, and employer-funded Employee Stock Ownership Plan (ESOP), • Student Debt Employer Contribution Program, • Paid holidays and PTO

Job DescriptionDCX-CHOL Enterprises Inc. is a leading source for high performance interconnect products. We design, engineer, and produce cable assemblies, wiring harnesses, conduit assemblies, custom connectors, wire enclosures and much more! We are privately held American owned Small Business made up of five (5) vertically integrated manufacturing and assembly divisions, each with their own history, specializations and products. Teletronic Division of DCX-CHOL Enterprises Inc. is actively seeking a Project Engineers with the following qualifications. The Project / Manufacturing Engineer is responsible for managing manufacturing jobs from initial release through final delivery. This role serves as the primary engineering point of contact for assigned work orders, ensuring manufacturability, schedule adherence, quality compliance, and timely issue resolution throughout the production lifecycle. The position requires strong project management skills, cross-functional coordination, and hands-on manufacturing engineering experience in an aerospace and defense environment. Position Description: The Project / Manufacturing Engineer owns assigned jobs end-to-end and works closely with Production, Quality, Supply Chain, and Program Management to ensure successful execution. Key Responsibilities: • Own manufacturing jobs from kickoff through final shipment, serving as the primary engineering contact throughout the lifecycle, • Develop, review, and release manufacturing travelers, work instructions, routings, and Bills of Materials (BOMs), • Coordinate cross-functionally with Production, Quality, Purchasing and Testing to ensure jobs progress on schedule, • Actively monitor work order status and identify risks related to schedule, material, tooling, or manufacturability, • Provide timely support to the production floor, resolving technical issues and clarifying documentation as needed, • Lead issue resolution related to manufacturing discrepancies, nonconformances, and build challenges, • Support and participate in MRB (Material Review Board) activities and dispositions, • Ensure ERP accuracy for work orders, BOMs, and engineering changes, • Drive jobs to completion by removing obstacles, coordinating resources, and escalating issues when required, • Communicate regularly with management on job status, risks, and corrective actions, • Support continuous improvement initiatives to reduce defects, improve flow, and increase manufacturing efficiency Required Skills & Technical Qualifications: Technical Skills: • Strong ability to read and interpret electrical and mechanical drawings, • Solid understanding of cable assemblies and electro-mechanical manufacturing processes, • Familiarity with aerospace and military standards and regulated manufacturing environments, • Experience creating and maintaining manufacturing documentation (travelers, work instructions, BOMs), • Experience supporting production floor activities and resolving manufacturing issues Project & Systems Skills: • Proven experience managing multiple jobs or projects simultaneously, • Strong organizational and prioritization skills, • Experience working within an ERP system for work orders, BOMs, and revisions, • Experience participating in MRB activities and structured problem solving Software Experience (Preferred): • ERP systems (experience required; specific system training provided), • Microsoft Office (Excel, Word, PowerPoint), • AutoCAD, Visio, or similar tools for technical documentation Education & Experience: • Bachelor’s degree in Engineering or related technical field (Manufacturing, Mechanical, Aerospace, or similar), • Minimum of 5 years of experience in a manufacturing engineering or project engineering role, • Prior experience in aerospace, defense, or other regulated manufacturing environments strongly preferred Professional Characteristics: • Strong ownership mentality and ability to push jobs to completion, • Clear and effective communication skills across engineering, production, and management, • Comfortable working in a fast-paced, high-mix manufacturing environment, • Proactive problem solver with a continuous improvement mindset, • Able to balance technical detail with schedule and execution priorities Additional Requirements: • Ability to lift up to 50 lbs, • Maintain a neat and professional appearance, • Willingness to work flexible hours, including evenings or weekends as required, • Must be able to communicate effectively in English, • Must be eligible to work in the United States DCX-CHOL Enterprises Inc. is an Equal Opportunity Employer; employment with DCX-CHOL Enterprises Inc. is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. ITAR REQUIREMENTS: To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. DCX-CHOL Enterprises Inc. is an Equal Opportunity Employer; employment with DCX-CHOL Enterprises Inc. is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. DCX-CHOL Enterprises Inc. will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each new employee’s Form I-9 to confirm work authorization via E-Verify.

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Purpose Divergent is a technology company, based in Los Angeles, on a mission to revolutionize manufacturing with its proprietary Divergent Adaptive Production System (DAPS™). We automate the design, manufacture, and assembly of complex structures using non-design specific software, additive manufacturing, and robotic assembly. We actively work with major Automotive OEMS and Aerospace Primes globally, addressing the automotive, aerospace, aviation, transportation, and agricultural industries. We are seeking a talented and experienced Master Data Management Analyst to join our team. In this role, you will be responsible for establishing and executing data governance practices while maintaining high-quality, reliable master data across enterprise systems. You will partner cross-functionally with Business Development, Data, Operations, Productions, and Engineering teams to define data standards, enforce governance rules, and ensure alignment of master data across ERP, PLM, MES, and other downstream platforms. The role will support and help shape the future-state ownership model for key data domains including items, vendor, customers, and operational data by partnering with stakeholders to assess current processes, identify gaps, and build the case for centralized master data management. You will contribute to data standardization efforts, naming conventions, and critical data quality controls while helping guide the organization toward scalable governance practices. This role will report to the Senior Manager, Data & Process Management. The ideal candidate is self-motivated, independent, detail-oriented, hands-on, and able to respond quickly in a fast-moving environment. We value leadership skills and those who conduct all activities with the highest level of integrity. The Role • Evaluate current-state master data processes and identify gaps, risks, and opportunities to improve data quality, consistency, and governance across enterprise systems., • Support the evolution of master data management capabilities by contributing to frameworks, operating models, and recommendations that enable future centralization of key data domains., • Drive data quality initiatives by establishing validation rules, monitoring critical attributes, and managing exception reporting to improve accuracy and consistency., • Manage and support data governance intake and workflow processes, ensuring proper tracking, approvals, and visibility of data-related requests and issues., • Develop and maintain data governance artifacts including data dictionaries, attribute definitions, naming conventions, and documentation repositories to support transparency and standardization., • Enable reporting and decision making by monitoring dashboards, metrics, and insights that highlight risks, trends, and opportunities for continuous improvement across the organization.Basic Qualifications, • Ability to lawfully access information and technology that is subject to US export controls, • Bachelor's degree in related fields such as Information Systems, Operations Management, Supply Chain, or Data Analytics., • 4+ years of experience in Master Data Management (MDM), including hands-on experience with maintaining and improving data quality across key domains (e.g., item, vendor, customer, or operational data), • Experience supporting data governance initiatives, including defining data standards, business rules, data ownership, and participating in governance processes or frameworks., • Demonstrated ability to coordinate projects or initiatives, including managing tasks, timelines, stakeholders, and cross-functional communication., • Experience working with ERP systems such as Oracle Fusion, SAP, or similar platforms while understanding system impacts with PLM and MES environments., • Strong analytical and problem-solving skills, with the ability to identify issues, perform root cause analysis, and recommend practical solutions., • Excellent communication and collaboration skills, with the ability to work effectively across business and technical teams. Preferred Qualifications • Experience with Oracle Fusion ERP, particularly in areas related to item master, BOM (Bill of Materials), inventory, purchasing, or supply chain data., • Hands-on experience supporting data governance practices, including working with data standards, data quality frameworks, and governance workflows., • Demonstrated project coordination or project management experience, with the ability to support cross-functional initiatives, manage timelines, and drive deliverables to completion., • Experience working with PLM and MES environments, with an understanding of how product and operational data integrates across systems., • Familiarity with data governance or workflow tools (e.g., Jira, data cataloging tools, or similar tools) to support intake, tracking, and issue resolution processes., • Working knowledge of SQL, with the ability to query, analyze, and validate data to support data quality and reporting efforts. Pay Range$95,400—$156,729 USD What We Offer: • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job Description Electrical Engineer – Power Systems & Water Infrastructure San Jose, CA | 100% In-office role | Relocation Required Full-Time | Permanent | Direct Hire Salary Range: $120,000 – $165,000 About the Opportunity We are recruiting on behalf of a well-established California-based water utility for a permanent, direct-hire Electrical Engineer to join their San Jose engineering team. This role supports the planning, detailed design, and construction design support of critical water infrastructure, with a strong emphasis on electrical power systems, controls, and motor control centers. This is a long-term career opportunity with a stable utility organization supporting essential public infrastructure. What You’ll Do The Electrical Engineer will provide electrical and controls engineering support for water facilities, including: • Prepare electrical construction drawings and technical specifications, • Perform advanced electrical engineering calculations, including:, • Short circuit current calculations, • Voltage drop calculations, • Breaker coordination studies, • Arc flash analysis, • Design and support low- and medium-voltage power distribution systems, • Design and work with motor control centers (MCCs), • Develop bid packages and support procurement of major electrical equipment, • Prepare RFPs and evaluate consultants and vendors, • Manage project scope, schedule, and budget, • Coordinate with contractors, consultants, agencies, and internal stakeholders, • Support construction management and field inspections, • Prepare reports, cost estimates, and technical documentation, • Assist with PUC rate case filings and annual capital budgets, • Present technical information to public agencies, special districts, and community groups, • Provide technical support to operations and maintenance teams, • Participate in continuous improvement initiatives Required Qualifications • Bachelor’s degree in Electrical Engineering (required; equivalent experience or coursework does not substitute), • Minimum 2 years of experience working as an Electrical Engineer, • Hands-on electrical design experience (power distribution, schematics, specifications) — candidates with installation support backgrounds only will not be considered, • Demonstrated knowledge of the National Electrical Code (NEC) as applied to power distribution (not controls-only) — candidates must be able to cite applicable NEC articles during interview, • Experience with motor control center (MCC) design (not just installation), • Experience with generator system design, including standby/emergency power systems and generator installation design, ATS equipment, an the like, • Experience with Arc Flash analysis principles and applicable NFPA 70E standards, • Proficiency with AutoCAD and development of design plans, • Project management experience with the ability to manage multiple priorities, • Strong written and verbal communication skills, • Proficient in Microsoft Office/M365, • Valid California Driver License (or ability to obtain one if coming in from out of state) Preferred Qualifications • California Engineer-in-Training (EIT) certification or California PE, • Experience using ETAP or similar power system modeling software, • Experience in water, wastewater, or process industries, • Experience working with consultants and contractors Why This Role • Direct hire, permanent position with a utility client, • Long-term career stability in essential infrastructure, • Competitive salary with a comprehensive utility benefits package, • Relocation assistance may be considered for the right candidate, • Work on high-impact capital projects that support local communities, • Strong internal engineering culture and professional development opportunities Benefits Our Client offers a comprehensive benefits package including: • 401(k) Plan with employer match, • Defined Benefit Pension Plan — 100% employer-funded, vests at 5 years, • Comprehensive Medical, Dental, and Vision coverage through the utility’s Health Care Plan or Kaiser Permanente, effective the first of the month following date of hire, • Life Insurance and Accidental Death & Dismemberment, effective the first of the month following date of hire, • Long-Term Disability, • Tuition Reimbursement, • 35 days of paid time off annually — 11 paid holidays, 4 floating holidays, 10 vacation days, and 10 sick days Union Membership This position is covered under a collective bargaining agreement. The successful candidate will be required to be a member of, or become a member of, the International Federation of Professional and Technical Engineers (IFPTE), AFL-CIO. The IFPTE represents engineering and technical professionals — not craft or trade workers — and is the union of record for our Client’s engineering and water quality employees.

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. We encourage all levels, SR IC->Director, to apply! The factories-as-a-service team analyzes our current customers' production and supply chain challenges, builds data-driven presentations, designs and scopes factories of the future, and assists the Federal and Strategic sales team in forming long-term partnerships with the DOD, Primes, and other manufacturers. This specific team is responsible for scoping, design, cost, schedule, and technology analysis, as well as proposals for major programs and manufacturing transformations across all manufacturing methods and domains. With several major programs in flight, we are hiring rapidly for this team that will effectively analyze, design, scope, plan, and handover (or join) execution of large-scale manufacturing efforts. The Role: Lead Manufacturing Engineer, Heat Treatment - We encourage all levels, SR IC->Director, to apply! * This role will oversee drawing reviews, CapEx planning, and automation feedback for Heat Treatment as part of the Factories as a Service team. * The Hadrian Factories as a Service team works across all manufacturing methods, and this role is expected to be the Lead Engineer for scoping, designing, planning, and automation feedback for Heat Treatment across all material types and configurations. * You’ll be able to review drawings for manufacturability quickly, select the right CapEx for part numbers and assemblies, advise ocapex heatcapur automation team on best practices for Heat Treatment, and gain a deep understanding of production and inspection methods for Heat Treatment. * This role will both assist in building new factories for existing production scope, as well as contribute to the manufacturing processes of new products where Heat Treatment is a designed-in function. * You’ll recruit and lead 1-2 Heat Treatment MEs to assist, and work with Hadrian’s Automation and Factories Leadership teams to design and ship comprehensive Heat Treatment production and inspection lines. * We are looking for individuals who can analyze drawings at a technical level, but are also capable of planning Heat Treatment lines or factories from scratch. We are interviewing at all levels. What You’ll Do: * Analyse customer drawings and current state of production to design, build, and guide automation of Heat Treatment DFM, Production, and Inspection Lines * Contribute as a key player in factories as a service efforts * Deliver cost/schedule/solutions in partnership with our customers and the Federal team * Own CapEx planning, vendor selection, and costing What We’re Looking For: * Senior Manager or above level who’s technically in the weeds, with deep expertise in Heat Treatment production and inspection * Able to travel ~25% to DOD and prime facilities * Capable of leading 1-2 Heat Treatment MEs * Able to analyse DFM, and design/plan production and inspection lines for Heat Treatment * Prior experience standing up new Heat Treatment lines in Aerospace, Automotive, or other domains * Ability to move quickly and make risk-adjusted decisions What Will Set You Apart: * Software or automation experience is not required, but helpful * Working knowledge of Heat Treatment technology and CapEx Benefits * Medical, dental, vision, and life insurance plans for employees * 401k * Relocation support may be provided for certain situations, based on business need. * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job DescriptionDescriptionVenturi Astrolab, Inc. (Astrolab) is pioneering new ways to explore and operate on distant planetary bodies. We are singularly focused on designing, building, and operating a fleet of multi-purpose commercial planetary rovers to extend and enhance humanity’s presence in the solar system. We are seeking motivated, creative, and exceptional people to join our world-class team. We are seeking a Systems Engineer to support our NASA Lunar Terrain Vehicle (LTV) program. This role will play a key part in coordinating system-level activities, verification, and compliance across multiple areas as LTV efforts ramp up alongside the FLIP program. The Systems Engineer will act as a bridge between engineering, certification, and program management to ensure alignment with NASA standards, rapid development cycles, and mission-level objectives. What you'll do:The certification team is responsible for evaluating each of the requirements identified in NASA’s LTV System Requirements Document (SRD) and: • Developing Verification Events to provide verification of each requirement, • Establishing and maintaining linkages from each requirement to the key design parameters as the design evolves, • Assisting the design team in meeting with NASA to clarify interpretations of the requirements, • Evaluating Interface Requirements Documents to identify interface verification methods and documenting them The Systems Engineer will support these activities and work closely with the Certification Lead, who oversees the overall performance of this effort, reporting to the Program Manager for the LTV program. Key Responsibilities • Support hands-on system-level integration and verification activities, • Coordinate requirement tracking, compliance documentation, and performance validation, • Engage with engineering and certification teams to maintain design traceability and alignment, • Apply experience with NASA programs, standards, and handbooks, • Understand each of NASA’s SRD requirements and document verification methods, • Track and document the verification of each requirement, • Analyze the 15 LTV performance metrics and collaborate with engineering to maintain a consistent chain of calculations, • Document and track key parameters that trace system requirements into the design, • Analyze interface requirements documents and establish verification methods, • Use computer tools to publish and maintain verification records, • Capture, report, and analyze quality objective data, • Participate in management review meetings and internal or external audits, • Manage documentation and train team members in this process, • Bachelor’s degree in a STEM discipline, • 5+ years of experience in systems engineering practices applied to spacecraft systems, • Knowledge of NASA systems engineering practices, • Technical proficiency in one or more of the spacecraft subsystems, • Experience with rapid spiral development methodologies, • Proficiency in Excel and PowerPoint, • Join a team of best-in-class engineers building the foundation of planetary surface exploration, • Equity ownership in the company, • Comprehensive health benefits, including medical, dental, vision, and mental health support, • 401(k) plan with company match, • Flexible PTO and parental leave, • Home office set up reimbursement, • Fully flexible and remote friendly work environment, • Weekly lunch stipend, plus complimentary snacks and beverages on-site, • Once a month social hour on-site with food and drinks

Job Description Claros is a power management solutions company that is innovating at the intersection of power and compute to make AI more sustainable and widely available. By driving down the cost and complexity of power delivery and leveraging innovative hardware and software, the company seeks to decrease energy consumption, optimize power delivery, increase compute performance, and maximize the efficiency of AI operations. Senior Electrical Engineer About Claros Claros enables Grid-to-Chip power infrastructure solutions for next generation Data Centers. Our mission is to transform power management to meet the global energy demand created by big data, artificial intelligence and ML. Through our innovative power delivery platform, our technology helps next generation data centers implement and operate server platforms that identify, control, and optimize power and energy management systems to meet real-world end user demands. We serve government and commercial customers. About The Team We are open-minded, fast paced, problem solvers that value open dialogue and candor. Our passion is to challenge the status-quo and we embrace transformational thinking. Our response is never "no, but…." instead "yes, if….". We are mindful of our personal and organizational blinders and try to build an environment where our team members are At Their Best. What You Will Do The Senior Electrical Engineer will be working with a Lead Engineer and be responsible for: • Design of high-power data center power system that contains a combination of AC/DC converters, DC/DC converters, and alternative energy resources (batteries, PV, etc.)., • Perform trade studies for all electrical components within the system, including breakers, power converters, batteries, and sensors., • Manage discussions with suppliers for electrical equipment and make final part selections for the system., • Integrate system based on customer requirements - including all aforementioned components as well as potentially IT server equipment., • Produce electrical drawings for the overall system including one-line diagrams, wire harnesses, and electrical installations, based on customer specifications., • Create test plans, perform system level evaluation, and root cause analysis for converter or system level failures., • Design of supporting circuits such as isolation monitoring or controllers, • Evaluate prototype hardware, from individual circuit boards to power converters., • Support software engineers to integrate algorithms and application code., • Apply electrical engineering knowledge to improve the system level protection and enhance the system reliability., • Minimum BS in Electrical Engineering with high voltage experience, specialized in power electronics preferred, 3 years + experience preferred., • Understanding of power electronics knowledge, such AC/DC, DC/DC and DC/AC converters, motor control, etc., • 1 year+ experience of design and evaluation of any high voltage power conversion system – such as solar inverter, motor drives, EV charger, data center system, and/or energy storage system products., • Experience of PCBA design using Altium designer program preferred., • Experience of developing high voltage converter product with UL compliance preferred., • Demonstration of engineer leadership in a cross functional team environment preferred., • Career track opportunity with potential for rapid advancement with strong performance as the firm grows, • 100% employer paid, comprehensive health care including medical, dental, and vision for you and your family., • Paid maternity and paternity for 14 weeks at employees' normal pay., • Unlimited PTO, with management approval., • Opportunities for professional development and continued learning. Our Red Cell Partners Benefits: • Career track opportunity with potential for rapid advancement with strong performance as the firm grows, • 100% employer paid, comprehensive health care including medical, dental, and vision for you and your family., • Paid maternity and paternity for 14 weeks at employees' normal pay., • Unlimited PTO, with management approval., • Opportunities for professional development and continued learning. By submitting an application, you acknowledge that Red Cell Partners, LLC ("Red Cell") uses third-party service providers to facilitate its recruitment and hiring processes. These providers include applicant tracking systems, candidate verification platforms, and fraud detection tools (collectively, "Hiring Platforms"). Your application materials, including your résumé, cover letter, work samples, responses to application questions, and any other information you submit, may be transmitted to and processed by these Hiring Platforms for the following purposes: • Managing and administering your application throughout the hiring process;, • Verifying the accuracy and authenticity of application materials, including by cross-referencing information you provide against publicly available sources and proprietary databases; Red Cell requires its Hiring Platform providers to process your information solely for the purposes described above and in accordance with applicable law. Your information will be retained only for as long as necessary to fulfill these purposes and any applicable legal obligations, after which it will be deleted in accordance with Red Cell's data retention policies. For more information about how your data is used, please refer to our Privacy Policy and Applicant Privacy Notice.