Support engineer jobs in Providence, Rhode IslandCreate job alerts

Job DescriptionSalary: Earthwise Energy Technologies, LLC is a well-established company that has set the standards for exceptional quality, on-time service, and wrapped itself in friendly customer service. Arden has proven itself as a place to provide career opportunities for an individual to master their craft, earn competitive wages, and to make an impact in the lives of our employees, customers, and community. While working for us expect to work in an environment that is employee centric or in other words employee focused and most of all where your hard work is appreciated, recognized, and rewarded. The success of the company and your future is directly impacted by your daily contributions. If you are looking to be a part of something more than just a job Make the move, apply today! Earthwise Energy Technologies, LLC has been waiting for you! We are seeking an experienced, motivated, and self-directed Mechanical HVAC Designer/Engineer to join our Engineering Department and provide high-quality design services across the firm. This role is ideal for a candidate with a strong foundation in HVAC design and Revit, who is eager to contribute immediately and continue developing toward senior-level responsibilities. At Earthwise, we believe that great projects are built by great teams. Our group thrives in a culture of collaboration, respect, and shared success. We are seeking someone who not only brings technical expertise but also values being part of a supportive and positive workplace. Key Responsibilities: • Develop HVAC system designs, including layout, equipment selection, ductwork, hydronic piping, heating and cooling load calculations, and energy analysis., • Create and maintain detailed construction documents, specifications, airflow diagrams, and piping/control schematics., • Work with 3D architectural models in Revit to draw ductwork and piping layouts, integrating mechanical systems with structural, electrical, plumbing, and other disciplines., • Design and/or assist in the design of Air Handling Units, Energy Recovery Ventilators, Boilers (gas, oil, propane), Hydronic Systems, Heat Pumps, VRF systems, and other HVAC components., • Support project phases from conceptual design through construction, bidding, and startup., • Apply ASHRAE, NFPA, and building code standards; coordinate with code officials as required., • Participate in site visits, field coordination, and startup support as needed., • Mentor junior staff and collaborate with engineers, architects, contractors, and service technicians to ensure successful project delivery., • Provide drafting support to other disciplines (Plumbing, Fire Protection, VDC group) when necessary. Education and Experience: • Required: 25+ years of HVAC design experience with a consulting or engineering firm., • Preferred: 510 years of progressive HVAC design/engineering experience., • BS in Mechanical Engineering or related field preferred but not required., • Direct Revit software experience required (2D & 3D drafting/modeling)., • Experience with load calculation software such as Trane Trace or HAP strongly preferred About Us: Arden Building Companies is the holding company for Arden Engineering Constructors, Corporate Mechanical of New England, Earthwise Energy Technologies, MJ Daly, and Unique Metal Works. Our comprehensive skill sets cover a wide range of services, including mechanical, electrical, and fire protection construction, service, maintenance, and building automation. With our extensive experience and talented teams, we provide the utmost level of quality and solutions for the demands of todays complex building systems. We are New Englands premier mechanical contractor. Arden Building Companies, LLC is an equal opportunity employer. Oursuccess directly reflects the skills, experience, and dedication our people. To help them succeed, we strive to provide a positive, productive work environment based upon both mutual respect and a commitment to compliance with all federal, state, and local laws. We recruit, hire, train, and promote employees without discriminating based on race, color, religion, gender, national origin, marital status, age, disability, or veteran status. All our employees share the responsibility for supporting our policies for a harassment-free and drug-free workplace. All offers of employment are contingent upon a criminal background check, driving record, and a 5-panel drug screen, satisfactory to Arden Building Companies, LLC policies.

Job Description The Manufacturing Engineer will assess manufacturing processes and mechanical integrity of products to ensure they will meet or exceed the company and customer’s expectations. This role will be responsible for implementing new products into the manufacturing environment, applying lean manufacturing principles, continuous improvement and design and process improvements. Core Functions • Implementation of hands-on manufacturing processes using fabrication and tool & die making skills, • Identify, analyze, and implement continuous quality improvement in design and manufacturing process efficiency, safety, quality and cost., • Development of work process’ to ensure that products are assembled properly and meet quality objectives through work instructions and training., • Perform capacity analysis, manufacturing process design, line layout design for existing and new manufacturing process and machine needs and develop better tools or systems., • Participate in procurement, installation, and runoff of new equipment processes., • Coordinate, provide input, and participate in specification, design, build, development, and launch of new products., • Develop and maintain process documentation in support of IATF certification. Minimum Qualifications & Requirements Education and Experience • Bachelor’s degree in mechanical or industrial engineering or related field required., • 2+ years of hands-on manufacturing engineering required., • Ability to analyze and redesign using Auto CAD / Inventor / SolidWorks required, • Experience with Lean Manufacturing Principles and Techniques required, • Experience with quality system planning and certification, such as IATF, ISO & TS16949 preferred, • Experience in Six Sigma and TPS preferred, • 3 years of Allen-Bradley PLC programming experience or other brands a plus · None Skills, Abilities, and Knowledge · Skilled in Microsoft Office. · Ability to write, speak, and comprehend English. · Knowledge of Auto CAD. · Ability to communicate clearly with all levels of the organization. · Ability to problem solve through 8D approach. Travel · Occasional travel may be required. About RealTruck RealTruck is the premier manufacturer and digital destination of accessories for truck, Jeep®, Bronco® and off-road enthusiasts around the world. Globally headquartered in Ann Arbor, Michigan, RealTruck’s 6,000+ associates operate from 35+ facilities across four continents. RealTruck’s industry leading product portfolio, which includes the Husky Liners total vehicle protection brand, boasts over 1,000 patents and pending applications. The company’s omni-channel retail approach delivers a seamless consumer experience online at RealTruck.com, as well as through its 12,000+ dealer network and automotive (OEM) partnerships.

Job DescriptionSalary: Arden Engineering Constructors, LLC is a well-established company that has set the standards for exceptional quality, on-time service, and wrapped itself in friendly customer service. Arden has proven itself as a place to provide career opportunities for an individual to master their craft, earn competitive wages, and to make an impact in the lives of our employees, customers, and community. While working for us expect to work in an environment that is employee centric or in other words employee focused and most of all where your hard work is appreciated, recognized, and rewarded. The success of the company and your future is directly impacted by your daily contributions. If you are looking to be a part of something more than just a job Make the move, apply today! Arden Engineering Constructors, LLC has been waiting for you! We are seeking an experienced and self-directed Mechanical HVAC Design Engineer to anchor our Mechanical Discipline providing design services to our engineering practices across the firm. The successful candidate will be proficient and experienced in leading and executing mechanical and HVAC construction packages on both stand-alone projects and as part of large multidisciplinary project teams. • The candidate will have experience in the design, specification, construction document development, bidding, construction, field engineering, and startup support of industrial, municipal, and commercial HVAC, utility, and process systems. This includes layout, equipment selection, heating & cooling load calculations hydronic heating piping, ductwork design, and general coordination of these mechanical discipline components for multidisciplinary projects., • Design experience shall also include but is not limited to Air Handling Units, Energy Recovery Ventilators, Fans, Oil, Gas & Propane Boilers, Electric Unit Heaters, Hydronic Heating Systems, Water to Water Heat Pumps, Fume Hoods, Louvers, Diffusers, Registers, Grilles, and split system heating/cooling units., • Candidate with HVAC system instrumentation and controls experience preferred, including design of the instruments, controls, and sequences of operations of commercial HVAC systems and unit processes., • Develop and evaluate system approaches, concepts, and options to determine the best design and engineering solution for each project based upon the project scope and life cycle costs., • Design mechanical systems including the preparation of all engineering calculations including load calculations, equipment selection and layout., • Develop all approved drawings and specifications., • AutoCAD, (MEP, Plant), Revit MEP, Sysque, NavisWorks proficiency a plus., • Ability to work independently with minimum supervision or in a team atmosphere., • Strong organizational and analytical skills., • Strong written and verbal communication and interpersonal skills., • Able to consistently set goals and meet deadlines and adapt to flexible responsibilities., • Willingness and ability to train and mentor junior staff in HVAC and design. Certifications and Licenses: • Mechanical Professional Engineering license. Multistate licensure preferred., • LEED AP credential a plus. Arden Building Companies is the holding company for Arden Engineering Constructors, Corporate Mechanical of New England, Earthwise Energy Technologies, MJ Daly, and Unique Metal Works. Our comprehensive skill sets cover a wide range of services, including mechanical, electrical, and fire protection construction, service, maintenance, and building automation. With our extensive experience and talented teams, we provide the utmost level of quality and solutions for the demands of todays complex building systems. We are New Englands premier mechanical contractor. Arden Building Companies, LLC is an equal opportunity employer. Oursuccess directly reflects the skills, experience, and dedication our people. To help them succeed, we strive to provide a positive, productive work environment based upon both mutual respect and a commitment to compliance with all federal, state, and local laws. We recruit, hire, train, and promote employees without discriminating based on race, color, religion, gender, national origin, marital status, age, disability, or veteran status. All our employees share the responsibility for supporting our policies for a harassment-free and drug-free workplace. All offers of employment are contingent upon a criminal background check, driving record, and a 5-panel drug screen, satisfactory to Arden Building Companies, LLC policies.

Job Description The mission of Speechify is to make sure that reading is never a barrier to learning. Over 50 million people use Speechify's text-to-speech products to turn whatever they're reading – PDFs, books, Google Docs, news articles, websites – into audio, so they can read faster, read more, and remember more. Speechify's text-to-speech reading products include its iOS app, Android App, Mac App, Chrome Extension, and Web App. Google recently named Speechify the Chrome Extension of the Year and Apple named Speechify its Design award winner for inclusivity for 2025. Today, nearly 200 people around the globe work on Speechify in a 100% distributed setting – Speechify has no office. These include frontend and backend engineers, AI research scientists, and others from Amazon, Microsoft, and Google, leading PhD programs like Stanford, high growth startups like Stripe, Vercel, Bolt, and many founders of their own companies. Overview With the growth of our Android app, being the most used text-to-speech app in the Play Store, we find the need for a Senior Android Engineer to help us support the new user base as well as work on new and exciting projects to push us forward. This is a key role and ideal for someone who thinks strategically, enjoys fast-paced environments, passionate about making product decisions, and has experience building great user experiences that delight users. We are a flat organization that allows anyone to become a leader by showing excellent technical skills and delivering results consistently and fast. Work ethic, solid communication skills, and obsession with winning are paramount. Our interview process involves several technical interviews and we aim to complete them within 1 week. What You'll Do • Owning major features and working closely with our design team - take ownership of features inside the app and become responsible of delivering high quality features, • Shape the future of our Android team, • Own, maintain and improve reliability metrics for key features, • Participate in discussions across different teams - Product, Design, Engineering, • Review pull requests, and support other teammates, • Handle critical issues or cope with unexpected challenges, • 5+ years of software engineering experience, • Familiarity with Android components, • Experience building or contributing to at least one Android app, • Product design intuition and user empathy, • Drive to push the boundaries of Android UI/UX, • Understanding of the importance of tests and how to approach writing tests, • Self-drive to improve the app and codebase above and beyond what's outlined in the spec, • Rock solid experience with Kotlin, Kotlin Coroutines, Kotlin Flow, Dagger 2, MVVM, Clean Architecture, Background Services, Music Player Service, Android Animations, Jetpack Navigation, JUnit tests, • Excellent communication skills, • User oriented problem solving approach, • Experience building, maintaining, or otherwise contributing to open source projects in Android, • Kotlin, • Kotlin Coroutines, • Kotlin Flow, • Jetpack Navigation, • Dagger 2, • Room, • Custom Views, Canvas & Paint, • Jetpack Compose, • A fast-growing environment where you can help shape the company and product., • An entrepreneurial-minded team that supports risk, intuition, and hustle., • A hands-off management approach so you can focus and do your best work., • An opportunity to make a big impact in a transformative industry., • Competitive salaries, a friendly and laid-back atmosphere, and a commitment to building a great asynchronous culture., • Opportunity to work on a life-changing product that millions of people use., • Build products that directly impact and support people with learning differences like dyslexia, ADD, low vision, concussions, autism, and more. Think you're a good fit for this job? Tell us more about yourself and why you're interested in the role when you apply. And don't forget to include links to your portfolio and LinkedIn. Not looking but know someone who would make a great fit? Refer them! Speechify is committed to a diverse and inclusive workplace. Speechify does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

Job DescriptionDescription: About Quantic Evans: Quantic Evans is a proud member of the Quantic™ Electronics Family Quantic™ Electronics, an electronic component company, is a trusted partner in military, aerospace, industrial, and commercial markets with over a century of combined experience as a reliable problem-solver. Being part of Quantic’s portfolio has allowed Quantic Evans to continue developing cutting-edge capacitor technology alongside other world-class technology companies representing mission-critical electronics’ future. With sites in East Providence, RI, and Sanford, ME, Quantic Evans manufactures high-energy density capacitors for demanding mission-critical applications. We have the most power-dense capacitor technology in the industry. We are routinely specified for defense, aerospace, and energy exploration applications where high reliability and SWaP (space, weight, and power) savings are critical design considerations. PROCESS ENGINEER, EAST PROVIDENCE, RI About the Role Reporting to the Engineering Manager, the Process Engineer will be responsible for developing, optimizing, and supporting manufacturing processes with a focus on quality, efficiency, and repeatability. The successful candidate will play a key role in establishing process controls, training production staff, and supporting equipment and controls integration across the facility. This role is ideal for someone who enjoys working in a hands-on role on the production floor, solving problems in real-time, and learning by doing. Process Development • Design, develop, and optimize manufacturing processes, including defining equipment requirements, workflow, and process parameters to meet production and quality goals., • Define equipment requirements, workflows, and process parameters., • Track and analyze production data to identify trends and implement improvements., • Establish and document robust process control plans, operating procedures, and standard work instructions to ensure consistent quality and throughput. Implement product controls in the process., • Create process flow diagrams and conduct process failure modes and effects analysis (PFMEA)., • Develop and deliver standard operating procedures/work instructions, job safety analyses, and hands-on instruction for operators and technicians to ensure proper understanding and execution of manufacturing processes., • Develop and maintain job safety analyses and operator instructions., • Perform additional duties as assigned. Requirements: Criteria For Success: • Bachelor’s degree in Electrical Engineering, Computer Engineering or other related Engineering., • 2+ years of experience in a controls or process engineering role., • Knowledge of manufacturing processes, process control, and continuous improvement methodologies (e.g., Lean, Six Sigma)., • Experience with equipment integration, PLC interfaces, or basic control systems. Experience with Ignition preferred., • Ability to create detailed process documentation and training materials., • Strong communication, teamwork, and problem-solving skills., • Experience in regulated manufacturing environments (e.g., medical devices, automotive, electronics) is a plus., • Capability to work in a fast-paced environment to meet deadlines and quotas., • Possess a collaborative team-oriented mindset and personality with a hands-on can-do attitude., • General knowledge of manufacturing preferred., • Proficiency with Microsoft Office (Word, Excel, PowerPoint, Teams, Outlook)., • Must be considered a U.S. Person eligible to work in the United States Work Environment And Physical Demands: • General office and manufacturing environment., • Exposure to hazards associated with manufacturing and production equipment and tools., • This position requires working near electrical and mechanical equipment that could potentially interfere with pacemaker function., • Ability to read and write in English., • Ability to use a computer and sit at a desk., • Ability to lift, push, and pull up to 50 pounds, • Walking to various stations or areas of the production floor., • Visual acuity for reading measurements, assembly instructions, and monitoring equipment., • Hearing ability to detect alarms, machinery sounds, or verbal instructions in a noisy environment, • Hands-on, can-do approach with a collaborative mindset., • Comfortable working in a fast-paced, deadline-driven environment. Quantic is an affirmative action/equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, work-related mental or physical disability, veteran status, sexual orientation, gender identity, or genetic information. We participate in E-Verify. EEO Poster in English EEO Poster in Spanish U.S. EXPORT CONTROLS As a U.S. defense manufacturer, Quantic Evans is required to safeguard U.S. defense-related and other export-controlled articles, technologies, and services from unauthorized access, export, or re-export. The transfer of U.S. export-controlled articles, technologies, or services (including manufacturing processes) to individuals or entities that do not qualify as “U.S. persons,” as defined by 22 CFR 120.62, is prohibited without prior authorization from the appropriate U.S. government agencies, such as the Department of State’s Directorate of Defense Trade Controls (DDTC). Under 22 CFR 120.62, a “U.S. person” is defined as a lawful permanent resident as per 8 U.S.C. 1101(a)(20), or a protected individual under 8 U.S.C. 1324b(a)(3). It also includes any corporation, business association, partnership, society, trust, or other entity that is incorporated to do business in the United States, as well as governmental entities at the federal, state, or local levels. It does not include foreign persons as defined in § 120.63. To ensure compliance with U.S. export control regulations, candidates for this position are required to undergo an Export Compliance Assessment. As part of this process, candidates may be asked to provide documentation verifying their status as “U.S. persons” or “foreign persons,” in accordance with U.S. regulation, to determine whether prior authorization is required to perform specific job duties related to this position

Job DescriptionWoodard & Curran is a national engineering, science, and operations firm with a simple vision for clean water, a safe environment, healthy communities, and happy people. As an employee-owned company, we strive to cultivate teams that encourage collaboration in an inclusive culture. We seek talented individuals from all backgrounds to help us address a broad range of water and environmental issues. We prioritize our people, offering opportunities for professional growth, ownership, and flexibility. This commitment enables us to make a meaningful impact on our clients, communities, and the planet. What’s in it for you: This position offers the chance to drive and grow remediation engineering services for a well-established, privately held, national environmental engineering and science firm. You'll collaborate with some of the industry’s leading technical experts to provide innovative solutions on various complex projects. The role also includes increased leadership opportunities through higher visibility in the marketplace, client interactions, account development, and speaking engagements and publication opportunities. Additionally, it offers a flexible work environment, competitive benefits, strong bonus potential, stock ownership opportunities, and relocation assistance. To name a few, these projects may include:- Optimizing the operations and performance of groundwater pump-and-treat remediation systems. - Designing and implementing in-situ and ex-situ remediation technologies and performance monitoring programs.- Leading field activities for Pre-Design Investigations to advance remediation programs at complex remediation sites.- Evaluating treatability test and field pilot study results to support teams in selecting, designing, and constructing full-scale remediation activities. Offering Flexible Hybrid Work Schedule: 2 - 3 Days from office Available Office Locations: Canton, MA // Providence, RI // Andover, MA Travel: up to 25% average to local clients and office Who are we looking for? Woodard & Curran has an opportunity for a mid-level project engineer who can support and manage a diverse range of challenging and engaging remediation projects. The selected candidate will be a key contributor to an integrated and multi-disciplinary team that provides high-quality remediation and consulting services to our industrial, commercial, and municipal clients. The selected candidate will report directly to Project Managers in our national Environmental Remediation Practice and work directly with a diverse and talented group of engineers and scientists. The ideal candidate is a mid-level engineer with strong technical experience delivering high-quality remediation and consulting services to projects located across the firm’s geography and core markets. The successful candidate will be an energetic, motivated, growth-oriented professional who can work independently and lead multi-disciplined project teams. What will you be doing at Woodard & Curran? • Conducting feasibility studies, • Preparing detailed design plans and specifications, • Evaluating remediation construction bids, • Estimating costs and managing the scope, schedule, and budget for various project tasks, • Designing in-situ and ex-situ soil and groundwater remedies, • Preparing technical reports in compliance with applicable environmental regulations, • Selecting, coordinating, and managing subcontractors, • Evaluating and mitigating vapor intrusion sites, • Managing remedial construction, • Managing and evaluating environmental data, • Remediating and/or redeveloping Brownfields sites, • Collaborating with project staff, clients, and regulatory agencies What will you need to succeed?, • 5 -12 years of professional experience with an environmental/engineering consulting firm., • Bachelor’s degree in engineering from an accredited program., • Registered Professional Engineer (PE) or Engineer-In-Training (EIT) is strongly preferred., • Technical experience with the lifecycle of remedial treatment systems and technologies., • Remedial project management experience (scope, schedule, budget, staffing)., • Experience with management of remediation contractors., • Strong communication, technical writing, and presentation skills., • Experience conducting field investigations and phased reporting under the Massachusetts Contingency Plan (MCP) is desirable. This position’s anticipated pay range is provided below; final exempt salary or non-exempt hourly pay will be dependent on experience level as well as considering a % based geographic differential based on where the final candidate will be working. Geographic differentials are used to recognize and reflect cost of labor differences between geographic markets. #LI-TB1 Employee Support & Benefits Retirement Savings:•401(k) Pre-tax or Roth Contributions: The company matches 100% of the first 3% of salary contributed Time away from work:•Observed holidays: Choose up to 9 holidays to observe annually•Vacation: Accrued based on years of experience and calculated on hours worked•Sick time: Paid sick time for non-work related illness or injury.•Parental leave: Up to 80 hours of Paid Parental Leave for child bonding Coverage and support for your needs and well-being:•Disability: Paid short and long term disability•Health: Medical plan options; plus dental and vision plans.•Life: Basic employee group life insurance and AD&D benefits; additional voluntary life insurance for employees and families is available through Sun Life.•Wellbeing: DarioMind assistance program combined with personalized mental health and wellbeing resources. Equal Employment OpportunityWoodard & Curran is an Equal Opportunity Employer. Individuals with Disabilities and Protected Veterans are encouraged to apply. We are committed to ensuring our employment practices are non-discriminatory and based solely on job-related factors. If you have a disability and need a reasonable accommodation to apply, please contact Beth Sweitzer. Inclusion & BelongingWe welcome individuals from all backgrounds to apply, as we believe that different perspectives and experiences enrich our workplace and enhance our ability to serve our clients and communities effectively. At Woodard & Curran, we are committed to fostering a respectful and inclusive work environment. We understand that the best solutions for our clients and communities come from a culture that nurtures the success and growth of all employees. As an employee-owned organization, our dedication to fostering growth, access and opportunity empowers us to serve our clients effectively and advance our mission of making a positive impact on the world. Our success is rooted in supporting our team members to reach their full potential, enabling us to deliver the most innovative, sound and effective solutions to improve our communities around us. Non-Solicitation Disclosure:Please be advised that we do not accept unsolicited resumes or candidate submissions from recruitment agencies. Any resumes or candidate profiles submitted without a signed contract in place will be considered unsolicited and will not be eligible for any referral fees. Recruitment agencies must have a valid, signed agreement with our company prior to following the submission process to consider potential candidates. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionEquipNet is seeking a Field Service Engineer to provide expert technical support for a wide range of laboratory instrumentation, with a primary focus on LC-MS and GC-MS systems. This role includes remote and on-site support, ensuring optimal system performance, compliance, and customer satisfaction across leading biotech, pharmaceutical, chemical, and environmental laboratories.Key Responsibilities • Deliver remote and on-site technical support for LC-MS and GC-MS instrumentation, ensuring maximum performance and uptime., • Diagnose and troubleshoot hardware, software, and application-related issues on systems from SCIEX, Agilent, Thermo Fisher, Waters, Shimadzu, Bruker, and PerkinElmer., • Perform preventative maintenance, repairs, and calibrations to meet manufacturer specifications and regulatory standards., • Support the installation, qualification (IQ/OQ/PQ), and validation of new LC-MS and GC-MS systems., • Optimize instrument performance through tuning, method troubleshooting, and workflow improvements., • Provide technical training and guidance to laboratory personnel on instrument operation, maintenance, and best practices., • Maintain accurate service logs, compliance records, and documentation of all service activities., • Serve as a brand ambassador, promoting EquipNet’s technical expertise and commitment to client success., • Partner with engineering, customer service, and technical support teams to expedite complex problem resolution., • Extend support to additional platforms, including Hamilton Liquid Handlers and Becton Dickinson Flow Cytometry systems.Required Skills & Qualifications, • Strong expertise in LC-MS and GC-MS systems, including hardware troubleshooting, maintenance, and software configuration., • Ability to diagnose complex failures and implement effective solutions quickly., • Familiarity with chromatography data systems (CDS) and mass spectrometry software., • Excellent problem-solving, analytical, and communication skills., • Strong organizational skills with a focus on compliance, accuracy, and documentation., • Ability to work independently in client environments while maintaining a professional, service-oriented approach.Experience & Education, • Associate’s or Bachelor’s degree in Analytical Chemistry, Engineering, Instrumentation, Biomedical Engineering, or related field (or equivalent experience)., • 3+ years of experience servicing or supporting LC-MS/GC-MS instrumentation in biotech, pharma, chemical, or environmental industries., • Hands-on experience with systems from SCIEX, Agilent, Thermo Fisher, Waters, Shimadzu, Bruker, and PerkinElmer (highly preferred)., • Experience with Hamilton Liquid Handlers and BD Flow Cytometry systems preferred., • Knowledge of regulatory standards (GLP/GMP, ISO, FDA) is a plus., • Proficiency with PC operating systems (Windows XP/7/10) and Microsoft Office Suite., • Valid driver’s license and ability to travel up to 25% overnight.Compensation & Benefits, • Salary Range: $70,000-$90,000 plus variable component., • Comprehensive health and dental insurance, • 401(k) plan with year-end employer contribution, • Paid time off and holidays, • Professional development opportunities, including training and certifications 11OsE83NtK

Job Description Summary Our client is a top notch and very well-established IT Solutions / MSP located in the Cranston, RI area and they are seeking to find an Senior Hospitality IT Engineer. This position manages day-to-day project activities, including tracking project milestones and deliverables, managing project scope changes, identifying potential issues and devising contingency and mitigation plans, estimating the resources and participants needed to achieve project goals, managing project budgets, and recommending subsequent budget changes where appropriate. The position also prepares project status reports and corresponding presentations, analyzes results, troubleshoots problem areas, and makes corresponding recommendations. Duties & Responsibilities • Manages day-to-day project activities, • Manages project scope, goals, and deliverables, • Estimates the resources and participants needed to achieve project goals, • Develops, maintains, and manages project plans and associated communications, • Proactively manages changes in project scope, identifies potential issues, and devises contingency and mitigation. Tracks project milestones and deliverables., • Develops and prepares project status reports and corresponding presentations, analyzes their results, troubleshoots problem areas, and makes corresponding recommendations, • Follows up with team members to ensure timely completion of deliverables. (Important) Keeps pace with emerging project management trends and best practices, • Performs additional responsibilities as assigned, • To mentor and train other employees, • Ability to travel (50-75%), • Ability to work flexible days/hours – some on-call duty, • Experience with Hospitality Systems, Including PMS, PMS interfacing, Room Keys, HSIA, digital signage, etc., • Experience with Point-of-Sale Systems, • Network & Server Experience:, • Experience with the following manufacturers networking equipment, including HP, Cisco, SonicWALL, Ruckus, • Experience with WAN/LAN Network Engineering and Operations, • Configure and install software, servers, routers, and other network devices, • Desired Experience:, • Previous experience Hotel or Resort, • Experience with PCI, • Experience with project and vendor management, • Soft Skills:, • Communication, both written & verbal, • Problem Solving, • Critical Thinking, • Attention to Detail, • Accountability, • Education:, • Background in Information Technology, Computer Science, Engineering, or Science or equivalent experience, • Advanced certifications:, • Cisco Certified Network Associate (CCNA), • Cisco Certified Network Professional (CCNP), • Certified Information Systems Security Professional (CISSP), • This job description is an overview of the responsibilities for this position. However, responsibilities are subject to change.

Job Description Summary Our client is a top notch and very well-established IT Solutions / MSP located in the Cranston, RI area and they are seeking to find an Senior Hospitality IT Engineer. This position manages day-to-day project activities, including tracking project milestones and deliverables, managing project scope changes, identifying potential issues and devising contingency and mitigation plans, estimating the resources and participants needed to achieve project goals, managing project budgets, and recommending subsequent budget changes where appropriate. The position also prepares project status reports and corresponding presentations, analyzes results, troubleshoots problem areas, and makes corresponding recommendations. Duties & Responsibilities • Manages day-to-day project activities, • Manages project scope, goals, and deliverables, • Estimates the resources and participants needed to achieve project goals, • Develops, maintains, and manages project plans and associated communications, • Proactively manages changes in project scope, identifies potential issues, and devises contingency and mitigation. Tracks project milestones and deliverables., • Develops and prepares project status reports and corresponding presentations, analyzes their results, troubleshoots problem areas, and makes corresponding recommendations, • Follows up with team members to ensure timely completion of deliverables. (Important) Keeps pace with emerging project management trends and best practices, • Performs additional responsibilities as assigned, • To mentor and train other employees, • Ability to travel (50-75%), • Ability to work flexible days/hours some on-call duty, • Experience with Hospitality Systems, Including PMS, PMS interfacing, Room Keys, HSIA, digital signage, etc., • Experience with Point-of-Sale Systems, • Network & Server Experience:, • Experience with the following manufacturers networking equipment, including HP, Cisco, SonicWALL, Ruckus, • Experience with WAN/LAN Network Engineering and Operations, • Configure and install software, servers, routers, and other network devices, • Desired Experience:, • Previous experience Hotel or Resort, • Experience with PCI, • Experience with project and vendor management, • Soft Skills:, • Communication, both written & verbal, • Problem Solving, • Critical Thinking, • Attention to Detail, • Accountability, • Education:, • Background in Information Technology, Computer Science, Engineering, or Science or equivalent experience, • Advanced certifications:, • Cisco Certified Network Associate (CCNA), • Cisco Certified Network Professional (CCNP), • Certified Information Systems Security Professional (CISSP), • This job description is an overview of the responsibilities for this position. However, responsibilities are subject to change. Employment Type: Full time Location: Cranston, RI

Job DescriptionBenefits: • 401(k) matching, • Competitive salary, • Dental insurance, • Health insurance, • Opportunity for advancement About Us: Mars Plastics is a full-service injection molding facility specializing in high-quality plastic components and custom solutions for a variety of industries. We also manufacture our own line of consumer storage products under the BinCraft brand. With a focus on innovation, efficiency, and customer satisfaction, we're seeking a skilled Process Engineer to join our growing team. Job Summary: We are looking for a results-driven Plastic Injection Molding Process Engineer to lead process development, optimization, and troubleshooting within our molding operations. This role is critical in ensuring part quality, improving cycle times, and reducing scrap to support efficient and consistent production. Key Responsibilities: • Develop, document, and optimize injection molding processes for new and existing products, • Troubleshoot molding issues, including part defects and process deviations, • Collaborate with tooling, maintenance, quality, and production teams to improve overall efficiency, • Perform mold trials and validations, including process capability studies, • Establish and maintain process parameters and setup sheets, • Identify opportunities for continuous improvement in molding operations, • Assist with training of machine operators and technicians on best practices, • Support preventive maintenance programs for injection molds and machines Qualifications: • Associate or Bachelors degree in Engineering, Plastics Technology, or related field preferred, • 3+ years of hands-on experience with plastic injection molding process engineering, • Strong knowledge of injection molding machinery, tooling, and materials, • Proficiency in troubleshooting molding defects and process control, • Familiarity with scientific molding principles is a plus, • Ability to read and interpret technical drawings and specifications, • Excellent communication and teamwork skills Benefits: • Competitive salary based on experience, • Health, dental, and vision insurance, • 401(k) with company match, • Paid vacation and holidays, • Opportunities for growth and advancement

Job Description ???? Mid–Senior Level Structural Waterfront Engineer – Rhode Island Help Shape the Future of Coastal Infrastructure Are you an experienced structural engineer passionate about waterfront and marine design? Join our growing Rhode Island team and take a leading role in delivering resilient, innovative infrastructure for ports, harbors, coastal communities, and marine facilities across New England. ???? What You’ll Do • Lead the design and analysis of waterfront and coastal structures, including piers, bulkheads, wharves, seawalls, fender systems, and offshore support elements., • Develop plans, specifications, reports, and technical calculations for new construction, rehabilitation, and resiliency upgrades., • Manage projects from concept through construction, coordinating with clients, permitting agencies, contractors, and internal design teams., • Conduct site assessments, structural inspections, and condition evaluations of marine structures., • Bachelor’s or Master’s degree in Civil/Structural Engineering., • 5–12+ years of experience in waterfront, marine, or heavy civil structural engineering., • Strong proficiency in structural design (steel, concrete, timber) and analysis software., • Experience with coastal loading, vessel berthing/mooring forces, and marine construction methods is highly preferred., • PE license required or ability to obtain in Rhode Island., • Work on high-impact waterfront projects across New England., • Collaborative culture with opportunities to lead, innovate, and grow., • Flexible hybrid work options and competitive compensation. Joseph P. Durkin Liberty Personnel Services, Inc. 1001 Conshohocken State Rd, Ste 2-410 West Conshohocken, PA 19428 Company DescriptionLibertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move! Hundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month. Established in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on: Information Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.Libertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move!\n\nHundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month.\n\nEstablished in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on:\n\nInformation Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.

Job Description The mission of Speechify is to make sure that reading is never a barrier to learning. Over 50 million people use Speechify's text-to-speech products to turn whatever they're reading – PDFs, books, Google Docs, news articles, websites – into audio, so they can read faster, read more, and remember more. Speechify's text-to-speech reading products include its iOS app, Android App, Mac App, Chrome Extension, and Web App. Google recently named Speechify the Chrome Extension of the Year and Apple named Speechify its App of the Day. Today, nearly 200 people around the globe work on Speechify in a 100% distributed setting – Speechify has no office. These include frontend and backend engineers, AI research scientists, and others from Amazon, Microsoft, and Google, leading PhD programs like Stanford, high growth startups like Stripe, Vercel, Bolt, and many founders of their own companies. Overview With the growth of our iOS app, being the #18 productivity app in the App Store category and also our recent recognition as Apple's 2025 Design Award for inclusivity, we find the need for a Senior iOS Engineer to help us support the new user base as well as work on new and exciting projects to push our missing forward. This is a key role and ideal for someone who thinks strategically, enjoys fast-paced environments, passionate about making product decisions, and has experience building great user experiences that delight users. We are a flat organization that allows anyone to become a leader by showing excellent technical skills and delivering results consistently and fast. Work ethic, solid communication skills, and obsession with winning are paramount. Our interview process involves several technical interviews and we aim to complete them within 1 week. What You'll Do • Opportunity to lead key engineering and product decisions, • Actively shipping production code for the Speechify iOS app, • Work within a dedicated product team, • Participate in product discussions to shape the product roadmap, • Experience. You've worked on products that scaled to a large user base, • Track record. You have worked on various products from inception to decent traction. You have been responsible for engineering the product, • Customer obsession. We expect every team member whose responsibilities directly impact customers to be constantly obsessed about providing the best possible experience, • Product thinking. You make thoughtful decisions about the evolution of your product and support internal teams and designers into taking the right direction, • Speed. You work quickly to generate ideas and know how to decide which things can ship now and what things need time, • Focus. We're a high-growth startup with a busy, remote team. You know how and when to engage or be heads down, • Swift Programming Language, • SwiftUI experience, • Experience in Multithreading Programming, • Working with CI/CD infrastructure, • Experience with Fastlane, • SOLID principles, the ability to write every single class according to SOLID, • A fast-growing environment where you can help shape the company and product, • An entrepreneurial crew that supports risk, intuition, and hustle, • The opportunity to make a big impact in a transformative industry, • A competitive salary, a collegiate atmosphere, and a commitment to building a great asynchronous culture, • Work on a product that millions of people use and where daily feedback includes users sharing that they cried when they first found the product because it was so impactful on their lives, • Support people with learning differences like Dyslexia, ADD, Low Vision, Concussions, Autism, and Second Language Learners, and give reading superpowers to professionals all over the world Think you're a good fit for this job? Tell us more about yourself and why you're interested in the role when you apply. And don't forget to include links to your portfolio and LinkedIn. Not looking but know someone who would make a great fit? Refer them! Speechify is committed to a diverse and inclusive workplace. Speechify does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

Job Description Summary: Train and observe Union personnel in the operation of RIAC vehicles, heavy equipment and job-related tools. Observe and ensure compliance in the use of job-related tools in accordance with RIAC and Occupational Safety and Health Administration (OSHA) safety standards and operating procedures. Shift: Monday – Friday 6:00am – 2:00 pm Essential Duties and Responsibilities: Other duties may be assigned; the essential duties and responsibilities include the following: • Trains and observes Union equipment operators using RIAC vehicles and tools to ensure proper usage and minimize the risk of injury, equipment damage, and property loss., • Maintains training records of vehicle and equipment operators., • Assists in providing Health and Safety training for all RIAC Union maintenance personnel in accordance with OSHA safety standards., • Educates and ensures RIAC Union personnel understand the proper use of job-related tools in accordance with RIAC and Occupational Safety and Health Association (OSHA) safety standards and operating procedures., • Documents and reports safety issues to the supervisor along with proposed action plans to resolve the safety concerns. With approval from supervisor, ensures proper resolution of safety issues., • Documents and reports employee safety violations to supervisor for necessary action., • Operates light and heavy-duty vehicles and equipment to include, but not limited to, power sweepers, dump body trucks, tractors, backhoes, front end loaders and other specialized snow removal equipment, as required., • Performs snow and ice removal as directed., • Strictly adheres to security provisions at all times, including entrance and egress from gates., • Uses two-way radio equipment to coordinate with other company personnel and to ensure compliance with aircraft movement area operations and air traffic control procedures, utilizing approved aviation terminology., • Must be readily available and willing to report to work during winter storm events and as required for emergency response., • Must be willing and able to mutually agree to alter shift schedule for training purposes as necessary. Supervisory Responsibilities: None. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Special qualifications include: • Must possess a thorough knowledge of state and federal laws pertaining to the operation of motor vehicles and heavy equipment., • Must possess a thorough knowledge of OSHA safety standards and operating procedures., • Demonstrate experience in formal training relating to OSHA safety standards and/or heavy equipment operations., • Ability to instruct multiple personnel in a classroom environment., • Possess at all times, and prior to being hired or transferred, a valid Rhode Island CDL Class A License which must be maintained as a condition of employment. Employee must also maintain motor vehicle insurability as a condition of continued employment., • Ability to perform each essential duty satisfactorily., • Must be capable of achieving and maintaining Movement Area vehicle operator authorization which must be maintained as a condition of continued employment., • Possess a basic knowledge of general maintenance methods routinely utilized at an airport., • Ability to understand and carry out oral and written instructions., • Must be able to successfully achieve and maintain an airport security clearance to access the airfield and airport terminal building which must be maintained as a condition of continued employment, • Must be computer literate. Be able to use Microsoft Office products and conduct Internet research., • Must be willing to work outside of normally scheduled work hours, in accordance with the CBA, to perform specific tasks as required. Education/Experience: • Bachelor’s degree required., • Five years’ recent demonstrable experience operating/servicing heavy motor equipment required., • Powered Industrial Truck License preferred., • Experience in grounds maintenance and snow removal operations at a 14 CFR Part 139 airport required. Certificates, Licenses, and Registrations: • CDL Class A License required which must be maintained as a condition of continued employment., • Hoisting/Engineer Certificate (Limited) must be obtained within six (6) months of employment., • Ability to travel on various types of terrain;, • May be exposed to all elements of weather;, • Ability to lift up to fifty (50) pounds;, • Considerable walking while performing inspections;, • Ability to physically traverse heavy equipment including ambulating in and out of equipment;, • Prolonged work on a computer at a desk Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. Work Environment: The work environment characteristics described herein are representative of those an employee encounters while performing the essential functions of this position. • Extremes of heat, cold, wind, dust, and dampness may be encountered as the work is usually performed outdoors year round., • Runways and taxiways may heighten the need for visual and aural acuity., • The use of safety equipment such as but not limited to seatbelt restraints, hard hats, goggles, safety vest and/or garment shall be routinely required. Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. The Rhode Island Airport Corporation is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. Rhode Island Airport Corporation makes hiring decisions based solely on qualifications, merit, and business needs at the time. This organization welcomes and encourages applications from minorities, veterans, and persons with physical and mental disabilities, and will reasonably accommodate the needs of those persons in the application process. The decision to grant a reasonable accommodation request will be made on a case-by-case basis. Be a part of one of the fastest growing airports in the country and support on the State’s biggest economic engines by joining the Rhode Island Airport Corporation (RIAC) which operates the State’s airport system. This is a Union position with generous compensation and benefits including the following: • Robust 414H retirement, 8% employee contribution with 8% company match, • Zero deductible medical plan that includes prescription coverage (also a health insurance waiver stipend), • Dental and vision insurance, • Company paid short and long term disability insurance, • Company paid $10,000 in life insurance, • Company paid $500 in Flexible Spending Account annually, • Generous vacation, personal and sick time plus 12 paid holidays, • Tuition reimbursement program

Job DescriptionWoodard & Curran is a national engineering, science, and operations firm with a simple vision for clean water, a safe environment, healthy communities, and happy people. As an employee-owned company, we strive to cultivate teams that encourage collaboration in an inclusive culture. We seek talented individuals from all backgrounds to help us address a broad range of water and environmental issues. We prioritize our people, offering opportunities for professional growth, ownership, and flexibility. This commitment enables us to make a meaningful impact on our clients, communities, and the planet. What’s in it for you: Woodard and Curran seek a dynamic, detail-oriented, and client-focused Professional Engineer to join our Water Team as a Project Engineer. In this role, you will collaborate with our municipal clients to develop, design, and deliver various drinking water projects across the New England region, including Massachusetts, Maine, Rhode Island, and Connecticut. Who are we looking for: The ideal candidate will be technically focused, with strong experience in evaluating, planning, designing, and constructing drinking water systems. Familiarity with a broad range of practice areas, including master planning, permitting, treatment, and distribution systems, is preferred. In collaboration with our Project and Technical Managers, you will help lead the technical delivery of multiple projects, work directly with clients and internal teams, and support marketing and proposal efforts. You will be an active participant in company and Drinking Practice initiatives and will have access to the firm’s senior technical staff and managers. Offering Flexible Remote/Hybrid Work Schedule: Expectation is 2 to 3 days in the office or onsite with clients. Travel up to 20%: Clients within the New England Region.Project may include • Drinking water distribution capacity analysis and design, • Drinking water treatment system upgrades, • PFAS treatment systems, • Lead and Copper Rule project initiatives, • Pumping station designs and rehabilitation, • Collection system assessments, design, and rehabilitation, • Municipal wastewater systems, including collection system infrastructure, pumping system hydraulics, and wastewater treatment processes, • Biosolids and renewable energy developmentWhat you will be doing at Woodard & Curran:, • Coordinating your work and the work of other junior engineers., • Developing and monitoring schedule and budget components of larger projects., • Demonstrating strong and proactive communication skills to keep the project team regularly updated as project work progresses., • Leading designs or portions of designs., • Working with and coordinating discipline work (civil, mechanical, structural, electrical, instrumentation, HVAC, Geotech, survey, etc.) internally and through sub-contractors., • Performing Construction Administration, including coordinating and conducting submittal reviews, reviewing contractor requests for information (RFIs), and reviewing contractor payment applications., • Working with AutoCAD software and guiding designers/drafters on design drawing production., • Making decisions independently or with appropriate oversight on engineering problems and methods., • Working on multiple projects simultaneously and meeting the needs of each project in a professional, reliable, and organized manner., • Mentoring and directing junior staff on technical assignments and reviewing technical work completed by engineers under supervision., • Connecting with external suppliers and subcontractors to quote and furnish materials and services., • Interacting with clients and professionally representing the firm., • Spending time in the field or on construction projects, as applicable to the project., • Coordinating with contractors and clients in the field during construction to ensure that projects are executed in compliance with the specifications and drawings., • Interfacing with local and state regulatory agencies., • Assisting with proposal development and pursuit of new opportunities., • Participating in professional associations.What you need to succeed:, • 4-8 years of engineering experience., • B.S. Degree in Civil, Environmental, or Chemical Engineering., • Registered Professional Engineer in Massachusetts, Maine, Rhode Island, and Connecticut (or ability to apply for reciprocity).This position’s anticipated pay range is provided above; final exempt salary or non-exempt hourly pay will be dependent on experience level as well as considering a % based geographic differential based on where the final candidate will be working. Geographic differentials are used to recognize and reflect cost of labor differences between geographic markets. #LI-TB1Employee Support & Benefits Retirement Savings:•401(k) Pre-tax or Roth Contributions: The company matches 100% of the first 3% of salary contributed Time away from work:•Observed holidays: Choose up to 9 holidays to observe annually•Vacation: Accrued based on years of experience and calculated on hours worked•Sick time: Paid sick time for non-work related illness or injury.•Parental leave: Up to 80 hours of Paid Parental Leave for child bonding Coverage and support for your needs and well-being:•Disability: Paid short and long term disability•Health: Medical plan options; plus dental and vision plans.•Life: Basic employee group life insurance and AD&D benefits; additional voluntary life insurance for employees and families is available through Sun Life.•Wellbeing: DarioMind assistance program combined with personalized mental health and wellbeing resources. Equal Employment OpportunityWoodard & Curran is an Equal Opportunity Employer. Individuals with Disabilities and Protected Veterans are encouraged to apply. We are committed to ensuring our employment practices are non-discriminatory and based solely on job-related factors. If you have a disability and need a reasonable accommodation to apply, please contact Beth Sweitzer. Inclusion & BelongingWe welcome individuals from all backgrounds to apply, as we believe that different perspectives and experiences enrich our workplace and enhance our ability to serve our clients and communities effectively. At Woodard & Curran, we are committed to fostering a respectful and inclusive work environment. We understand that the best solutions for our clients and communities come from a culture that nurtures the success and growth of all employees. As an employee-owned organization, our dedication to fostering growth, access and opportunity empowers us to serve our clients effectively and advance our mission of making a positive impact on the world. Our success is rooted in supporting our team members to reach their full potential, enabling us to deliver the most innovative, sound and effective solutions to improve our communities around us. Non-Solicitation Disclosure:Please be advised that we do not accept unsolicited resumes or candidate submissions from recruitment agencies. Any resumes or candidate profiles submitted without a signed contract in place will be considered unsolicited and will not be eligible for any referral fees. Recruitment agencies must have a valid, signed agreement with our company prior to following the submission process to consider potential candidates. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionWoodard & Curran is a national engineering, science, and operations firm with a simple vision for clean water, a safe environment, healthy communities, and happy people. As an employee-owned company, we strive to cultivate teams that encourage collaboration in an inclusive culture. We seek talented individuals from all backgrounds to help us address a broad range of water and environmental issues. We prioritize our people, offering opportunities for professional growth, ownership, and flexibility. This commitment enables us to make a meaningful impact on our clients, communities, and the planet. What’s in it for you? Woodard and Curran seek a dynamic, detail-oriented, and client-focused Professional Engineer to join our Water Team as a Technical Manager. In this role, you will collaborate with our municipal clients to develop, design, and deliver various drinking water projects across the New England region, including Massachusetts, Maine, Rhode Island, and Connecticut. Our New England team comprises a dynamic group of engineers, scientists, and design professionals who emulate Woodard & Curran’s values. Woodard & Curran creates a safe and fun environment for employees to thrive and collaborate with teams locally and nationwide to deliver clean water solutions to our clients. Who we are looking for: The ideal candidate will be technically focused, with solid experience in evaluating, planning, designing, and constructing drinking water systems. Familiarity with a broad range of issues related to master planning, treatment, and distribution systems is preferred. In collaboration with the Project Manager, you will help lead the delivery of multiple projects, work directly with clients and internal teams, and support marketing and proposal efforts. Offering Flexible Remote/Hybrid Work Schedule: Expectation is 2 to 3 days in the office or onsite with clients. Travel up to 20%: Clients within the New England Region.To name a few, projects may include: • Drinking water distribution capacity analysis and design, • Drinking water treatment system upgrades, • PFAS treatment systems, • Lead and Copper Rule project initiatives, • Pumping station designs and rehabilitation, • Collection system assessments, design, and rehabilitation, • Municipal wastewater systems, including collection system infrastructure, pumping system hydraulics, and wastewater treatment processes, • Biosolids and renewable energy developmentWhat you will be doing at Woodard & Curran:, • Acting as the technical leader for all sizes of projects, • Working alongside Project Manager(s) to lead the technical delivery of project tasks., • Determining the overall technical approach for projects., • Preparing and delivering presentations and training programs to internal and external clients and professional associations, • Providing input on the continued development of Woodard & Curran’s design guidelines and standards., • Assisting in the development of project schedules and budgets, • Demonstrating strong and proactive communication skills to keep the project management and technical team(s) updated as project work progresses., • Working on multiple projects simultaneously and meeting the needs of each project in a professional, reliable, and organized manner., • Mentoring and directing junior and mid-level staff on technical assignments and reviewing technical work completed by engineers under supervision., • Connecting and working with external suppliers and subcontractors support project delivery., • Interacting with clients and professionally representing the firm., • Visiting client sites for meetings, proposal development, and/or observing construction project status., • Coordinating with contractors and clients in the field during construction to ensure that projects are executed in compliance with the Contract Documents., • Interfacing with state and local regulatory agencies and permitting officials, • Assisting the Client Management team with proposal development and pursuit of new opportunities., • Participating in professional organizations. What you will need to succeed:, • 8-15 years of engineering experience., • A B.S. Degree in Civil or Environmental Engineering or an M.S. Degree is preferred., • The successful candidate will have technical and project delivery expertise in civil and environmental engineering and an in-depth understanding of the engineering concepts associated with all types of municipal water systems, including water supply and treatment processes and distribution systems infrastructure., • Well-versed in state and federal regulations regarding water treatment and distribution systems., • Knowledgeable in state bidding laws and funding programs., • Up to date on the latest technological advances, regulatory trends, equipment, and processes., • Superior writing, communication, and presentation skills., • Registered Professional Engineer in Massachusetts, Maine, Rhode Island, and Connecticut (or ability to apply for reciprocity).This position’s anticipated pay range is provided below; final exempt salary or non-exempt hourly pay will be dependent on experience level as well as considering a % based geographic differential based on where the final candidate will be working. Geographic differentials are used to recognize and reflect cost of labor differences between geographic markets. #LI-TB1Employee Support & Benefits Retirement Savings:•401(k) Pre-tax or Roth Contributions: The company matches 100% of the first 3% of salary contributed Time away from work:•Observed holidays: Choose up to 9 holidays to observe annually•Vacation: Accrued based on years of experience and calculated on hours worked•Sick time: Paid sick time for non-work related illness or injury.•Parental leave: Up to 80 hours of Paid Parental Leave for child bonding Coverage and support for your needs and well-being:•Disability: Paid short and long term disability•Health: Medical plan options; plus dental and vision plans.•Life: Basic employee group life insurance and AD&D benefits; additional voluntary life insurance for employees and families is available through Sun Life.•Wellbeing: DarioMind assistance program combined with personalized mental health and wellbeing resources. Equal Employment OpportunityWoodard & Curran is an Equal Opportunity Employer. Individuals with Disabilities and Protected Veterans are encouraged to apply. We are committed to ensuring our employment practices are non-discriminatory and based solely on job-related factors. If you have a disability and need a reasonable accommodation to apply, please contact Beth Sweitzer. Inclusion & BelongingWe welcome individuals from all backgrounds to apply, as we believe that different perspectives and experiences enrich our workplace and enhance our ability to serve our clients and communities effectively. At Woodard & Curran, we are committed to fostering a respectful and inclusive work environment. We understand that the best solutions for our clients and communities come from a culture that nurtures the success and growth of all employees. As an employee-owned organization, our dedication to fostering growth, access and opportunity empowers us to serve our clients effectively and advance our mission of making a positive impact on the world. Our success is rooted in supporting our team members to reach their full potential, enabling us to deliver the most innovative, sound and effective solutions to improve our communities around us. Non-Solicitation Disclosure:Please be advised that we do not accept unsolicited resumes or candidate submissions from recruitment agencies. Any resumes or candidate profiles submitted without a signed contract in place will be considered unsolicited and will not be eligible for any referral fees. Recruitment agencies must have a valid, signed agreement with our company prior to following the submission process to consider potential candidates. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionJob Title: Electric Utility Standards Engineer Location: Providence, RI Work Schedule: Hybrid Duration: one year with potential of extension or conversion Overview Our client is seeking a Electric Utility Standards Engineer to join their team in Providence, RI. This hybrid role combines remote work, in-office collaboration, and in-field activities. The successful candidate will play a key role in developing and maintaining work procedures, supporting new technologies, and ensuring safe and efficient operations across the electric utility enterprise. Responsibilities • Collaborate with subject matter experts to design, develop, and update procedures, including checklists, job aids, and work methods., • Coordinate reviews of new or revised technical documents with Safety, Enterprise Standards, Training, and other groups to ensure safe operation and maintenance of new equipment., • Lead construction of equipment mock-ups and simulations for procedure development and training content., • Develop communication strategies to improve understanding and adoption of work procedures through presentations, committees, process improvement meetings, and traveling roadshows., • Support new technology initiatives and travel to operating companies as needed., • Represent the client as an electric utility partner in industry committees., • Identify and incorporate new technologies into procedures and training materials., • Participate in emergency and storm roles requiring after-hours work when activated., • Execute initiatives within Enterprise Standards to deploy new technologies and support grid modernization., • Five years of construction experience in Electric Utility field work (Journeyman equivalent); OR, • Proficiency in Microsoft Word, PowerPoint, Outlook, Excel, and Adobe Acrobat., • Strong technical writing skills., • Excellent verbal communication and presentation abilities., • Skilled in facilitation and questioning techniques for working with subject matter experts. #INDGEN #ZR

Job Description Do you like travel and have a background in "hands-on" Mechanical Engineering? If you do, then we have the job for you. The job with OST Services (a subsidiary of LISEGA, Inc.) involves the Jr. Field Service Engineer ideally having some experience with pipe supports, restraints and snubbers. The work will be performed at non-nuclear and nuclear electrical generating facilities, waste treatment plants, paper mills, Petro-Chemical plants etc. located throughout North America along with some limited international travel. Depending on the workload and the individual’s interest the position could also be seasonable (part-time) but is intended for full-time employment. This job has fully paid travel expenses, per diem and work at clean power plants located throughout North America. You will travel a lot in this job and your pay rate will depend on your experience level and is targeted between $30 and $40 per hour plus per diem when traveling. The individual should be capable of some, or all, of the following; • Evaluate piping/support systems., • Prepare technical reports detailing inspection results, subsequent recommendations and conclusions., • Supervise adjustments, installation and repair of the above as required., • Familiar with the application and design of pipe supports., • Perform limited activities to generate and maintain customers., • Order and expedite materials, interface with manufacturing facilities, customer correspondence to ensure that delivery and contract commitments are met., • Development and implementation of design and fabrication procedures., • Guide and/or perform hydraulic snubber testing and rebuilding., • On- and off-site assistance in troubleshooting., • Knowledge of piping materials and various nondestructive testing techniques. Qualifications: • BS in Mechanical Engineering or equivalent mechanical experience., • Familiar with pipe support and restraint products., • Mechanically inclined., • Must be self-motivated and can work independently., • Computer literate. Physical & Mental Demands: • Reading, writing, detailing (rough) calculations., • Ability to perform lifting, climbing, stooping., • Visual acuity., • Must have the ability to work under pressure in order to meet customer requirements, deadlines, etc., • Travel to specific jobsites within the US and abroad., • Able to react to customer urgency in times of emergency., • Work professionally with co-workers and customers. LISEGA, Inc. is an Equal Employment Opportunity employer /F/M/D/TN Drug Free Workplace/Safety Driven LISEGA Inc. does not discriminate on the basis of race, sex, color, religion, national origin, age, disability or veteran status in any employment opportunities: terms, conditions or privileges of employment. LISEGA, Inc. does not discriminate on the basis of race, sex or disability in any of its activities pursuant to the requirements of Title VII of the Civil Rights Act of 1964, Section 504 of the Rehabilitation Act of 1973, and the Americans with Disabilities Act (ADA)of 1990. Requests for accommodation of a disability should be directed to the Human Resources office. Company DescriptionThe LISEGA group of companies is the world’s leading specialist for industrial pipe support systems. The LISEGA product range of over 12,000 standardized items is the most comprehensive modular pipe support range worldwide that provides technical solutions for all typical industrial applications. ( LISEGA group of companies is the world’s leading specialist for industrial pipe support systems. The LISEGA product range of over 12,000 standardized items is the most comprehensive modular pipe support range worldwide that provides technical solutions for all typical industrial applications. ()

Job Description Mission Speechify is the easiest way to listen to the world's information. Articles on the web, documents in the cloud, books on your phone. We absorb it all and let you listen to it at your desk, on the go, at your own speed, and with tools that make learning easier, deeper, and faster. What streaming services have done for audio entertainment, we're doing for audio information. And whatever we're doing seems to be working. We're #1 in our category, and experiencing exponential growth. Overview We're looking for a Senior Software Engineer to join our Core Experiences Team. This team builds and maintains the foundational services and SDKs that power Speechify's product experience across platforms. It's a critical role for someone who enjoys working at the intersection of product and infrastructure, thinks strategically, and is passionate about designing clear, reliable APIs and simple systems that directly enhance the user experience. What You'll Do • Collaborate with Speechify's Product Teams to scope projects, find ways to reduce scope to get faster feedback from customers, navigate the integration/UX tradeoffs relevant to different product teams, and deliver solutions via our cross-platform SDK, • Optimize existing functionality to ship things like faster loading and more intelligent parsing by designing more efficient abstractions and improving our algorithms, • Systems thinking. You know that optimizing a system requires end-to-end design, and you believe simplicity is valuable., • Speed. You work quickly to generate ideas and options and know how to decide which things can ship now and what things need time, • Focus. We're a high-growth startup with a busy, remote team. You know how and when to engage or be heads down, • Collaboration. You know how to inspire, play, and negotiate with opinionated designers, marketers, and PMs, • Preferred Tech Stack:, • Kotlin Multiplatform (Java experience is OK but role is Kotlin Multiplatform), • A fast-growing environment where you can help shape the company and product., • An entrepreneurial-minded team that supports risk, intuition, and hustle., • A hands-off management approach so you can focus and do your best work., • An opportunity to make a big impact in a transformative industry., • Competitive salaries, a friendly and laid-back atmosphere, and a commitment to building a great asynchronous culture., • Opportunity to work on a life-changing product that millions of people use., • Build products that directly impact and support people with learning differences like dyslexia, ADD, low vision, concussions, autism, and more. Think you're a good fit for this job? Tell us more about yourself and why you're interested in the role when you apply. And don't forget to include links to your portfolio and LinkedIn. Not looking but know someone who would make a great fit? Refer them! Speechify is committed to a diverse and inclusive workplace. Speechify does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

Job Description Company Overview: Glosten is a naval architecture and marine engineering firm that has served the marine industry for over 65 years. We work in teams to accomplish exciting projects in a stimulating, fast-paced, and collegial environment. We are an employee-owned company drawn to unique and challenging marine projects. We have grown steadily and deliberately to a team of 120 employees who are ready to solve complex problems and think outside the box. We continuously strive to improve our business practices and technical performance to better serve the industry. We believe the secret to our success is our talented team and our culture of mutual respect and cooperation. Job Description We are seeking a talented Marine Mechanical Engineer to join our marine engineering team. We are looking for candidates who: • Are passionate about the maritime industry., • Thrive in a culture of collaboration, innovation, and integrity., • Embrace a philosophy of client service by solving real-world problems clients face in the maritime industry, supporting their best interests and building lasting partnerships through reliable service and dependable solutions., • Design and develop shipboard systems on marine vessels, ensuring compliance with industry standards, marine regulations, and best practices., • Perform feasibility and trade studies to evaluate the best design solutions for our clients., • Conduct calculations and analysis for ship auxiliary system design, propulsion system sizing, HVAC system design and various other marine systems., • Create and review technical drawings, schematics, specifications, and documentation for regulatory review and shipyard cost estimating., • Lead engineering teams, assign tasks, provide technical oversight, manage scope and budget, schedule, and develop proposals., • Collaborate with cross-functional teams to ensure seamless integration of mechanical designs into vessels., • Stay updated on recent developments in marine engineering and incorporate this knowledge into projects., • Minimum four (4) years of experience in a maritime design environment, consulting engineering experience is preferred., • Bachelor's degree in marine engineering, naval architecture, mechanical engineering, or electrical engineering., • Professional Engineering (PE) Licensure in a relevant discipline is expected. Applicants without PE license who would be eligible to take the licensing exam in their first year may be considered., • Proficiency with CAD software (AutoCAD, Rhino3D, and SolidWorks) and Microsoft Office software packages., • Strong communication, technical writing, teamwork abilities, and excellent problem solving skills., • Experience designing to regulatory rules such as American Bureau of Shipping (ABS) Rules for Building and Classing Marine Vessels and Code of Federal Regulations (CFR) Title 46: Shipping., • Must be authorized to work in the United States. Due to project restrictions, Glosten will only consider applicants with unrestricted access to work in the United States or those eligible for TN visas. Once 90 days has been successfully completed, associates may work in accordance with our hybrid remote work policy. Glosten is proud to provide equal employment opportunity to all employees and applicants for employment. To provide equal employment and advancement opportunities to all, employment decisions will be based on merit, qualifications, and abilities. Glosten does not discriminate in employment opportunities or practices on the basis of race, color, sex, age, religion, national origin, handicap, disability, sexual orientation, or veteran status in accordance with applicable state and federal laws. We are passionate about building and sustaining an inclusive and equitable working and learning environment for all associates. We believe every member of our team enriches our diversity by exposing us to a broad range of ways to understand and engage with the world, identify challenges, and to discover, design and deliver solutions. We encourage women, minorities, veterans, and individuals with disabilities to apply for this position. Visit our website () and our social media pages to learn more about who we are, our projects and clients, and what is happening at Glosten. Application Instructions Applications missing any of these documents will not be considered. To be considered for this position, you'll need to submit the following items: • Cover letter, • Resume Job Posted by ApplicantPro

Job Description Do you like travel and have a background in "hands-on" Mechanical Engineering? If you do, then we have the job for you. The job with OST Services (a subsidiary of LISEGA, Inc.) involves the Field Service Engineer ideally having five plus years of experience with pipe supports, restraints and snubbers. The work will be performed at non-nuclear and nuclear electrical generating facilities, waste treatment plants, paper mills, Petro-Chemical plants etc. located throughout North America along with some limited international travel. Depending on the workload and the individual’s interest the position could also be seasonable (part-time) but is intended for full-time employment. This job has fully paid travel expenses, per diem and work at clean power plants located throughout North America. You will travel a lot in this job and your pay rate will depend on your experience level and is targeted between $50 and $60 per hour plus per diem when traveling. The individual should be capable of some, or all, of the following; • Evaluate piping/support systems., • Prepare technical reports detailing inspection results, subsequent recommendations and conclusions., • Supervise adjustments, installation and repair of the above as required., • Familiar with the application and design of pipe supports., • Perform limited activities to generate and maintain customers., • Order and expedite materials, interface with manufacturing facilities, customer correspondence to ensure that delivery and contract commitments are met., • Development and implementation of design and fabrication procedures., • Guide and/or perform hydraulic snubber testing and rebuilding., • On- and off-site assistance in troubleshooting., • Knowledge of piping materials and various nondestructive testing techniques. Qualifications: • BS in Mechanical Engineering or equivalent mechanical experience., • Five plus years of experience with pipe support and restraint products., • Mechanically inclined., • Must be self-motivated and can work independently., • Computer literate. Physical & Mental Demands: • Reading, writing, detailing (rough) calculations., • Ability to perform lifting, climbing, stooping., • Visual acuity., • Must have the ability to work under pressure in order to meet customer requirements, deadlines, etc., • Travel to specific jobsites within the US and abroad., • Able to react to customer urgency in times of emergency., • Work professionally with co-workers and customers. LISEGA, Inc. is an Equal Employment Opportunity employer /F/M/D/TN Drug Free Workplace/Safety Driven LISEGA Inc. does not discriminate on the basis of race, sex, color, religion, national origin, age, disability or veteran status in any employment opportunities: terms, conditions or privileges of employment. LISEGA, Inc. does not discriminate on the basis of race, sex or disability in any of its activities pursuant to the requirements of Title VII of the Civil Rights Act of 1964, Section 504 of the Rehabilitation Act of 1973, and the Americans with Disabilities Act (ADA) of 1990. Requests for accommodation of a disability should be directed to the Human Resources office. Company DescriptionThe LISEGA group of companies is the world’s leading specialist for industrial pipe support systems. The LISEGA product range of over 12,000 standardized items is the most comprehensive modular pipe support range worldwide that provides technical solutions for all typical industrial applications. ( LISEGA group of companies is the world’s leading specialist for industrial pipe support systems. The LISEGA product range of over 12,000 standardized items is the most comprehensive modular pipe support range worldwide that provides technical solutions for all typical industrial applications. ()

Job Description Are you highly motivated, hard-working, and seeking to join a growth-focused consulting & engineering firm? Are you looking for a company that will invest in your development and grow your professional skills? If so, consider a career with Apex! Powered by record sales, extraordinary client retention, strategic acquisitions, and an entrepreneurial spirit, Apex Companies is one of the fastest growing engineering and environmental consulting firms in the US. We were recently recognized by the Zweig Group as one of the fastest growing firms in the AEC industry. We take pride in providing our clients with exceptional service and have earned numerous awards for project excellence. We continue to grow, and we want you to grow with us. Our Northeast Division is a well-respected and award-winning group where career development, training, and mentoring co-exist with diverse civil, environmental, water resources, and traffic/transportation projects in a fast-paced and challenging work environment. We are seeking a talented Senior Project Engineer to support our Water/Wastewater practice in the Northeast. This position can be based in any of our New England offices and can work on a hybrid schedule. The selected candidate will provide technical leadership and support for a variety of utility design related projects, including treatment plants, pump/booster stations, water storage tanks, and water distribution systems. Primary Responsibilities • Assists the Project Manager in the planning, coordination, and execution of both large and small projects, • Prepares technical memoranda, reports, proposals, and contract and subcontract scopes of work, • Works effectively and efficiently within prescribed budgets, and monitor project performance on a weekly basis, • Develops and negotiates scopes, fees, and schedules with sub-consultants under the guidance of the Project Manager, • Develops technical solutions for more complex project challenges by applying engineering knowledge and skills to produce quality work, • Assists in the development and execution of all aspects of the project scope of work, • Assists the Project Manager in complying with project schedules and budget by actively reporting on project progress and identifying additional work outside the contractual scope, • Works closely with Project Managers to gain project management experience, • Responsible for financial performance on tasks or projects under their control, • Serves as the Technical Lead in respective discipline, and assume responsibility for the technical coordination among other design disciplines and subcontractors or subconsultants, • Supervises and trains less experienced staff by providing daily guidance and checking their work and progress. Provide input for annual reviews, • Develop technical approach, schedules, and fee estimates for proposals, • Maintain quality control within the discipline by reviewing designs and checking calculations, assumptions, and the basis of design, • Assists in the coordination of client meetings, including public hearings., • Prepares and performs oral presentations for clients regarding project deliverables, • Assists Project Manager by leading construction administration tasks such as construction progress meetings; submittal reviews; preparation of meeting agendas and minutes; review of daily and weekly construction reports; preparation of payment applications, RFIs, and change orders; coordination with Resident Project Representatives; completing project closeout; and tracking construction schedules, • Provides consistent and detailed updates to the Project Manager, • Demonstrates awareness of corporate priorities regarding quality of work, health and safety, client satisfaction, and project profitability, • Understands and is aware of contract terms and conditions, professional liability matters, and advises the Project Manager of any concerns, • Participates in approved external associations and professional conferences and present and/or author technical papers, • Identifies areas of potential claims by preparing documentation and reporting to Project Manager, • Bachelor of Science Degree in Civil or Environmental Engineering or a Master's Degree in Civil or Environmental Engineering, • 6+ years of planning and design experience in water or wastewater including pipelines, pumps stations, treatment plants, storage tanks, hydraulic modeling, and master planning, • Registered Professional Engineer, or working towards licensure within one year, in a State(s) where Apex does work or the ability to obtain same by reciprocity, • CAD proficiency and experience in technical report writing is ideal, • The ability to supervise and train less experienced staff, • Company-subsidized medical and dental., • Company-paid life, short, and long-term disability., • 401k match, tuition assistance, and more., • Cross-training and the ability to work on a variety of projects., • Performance-based bonuses or other incentives., • Working with the best and brightest in the industry., • 1,800+ employee national firm with 50+ locations Apex Job Title: Sr Project Engineer Req ID: 10590 Annual Expected Pay Range$85,000—$135,000 USD We believe in equality for all and celebrate the diversity and differences of our employees, customers, and communities. We do not discriminate based on gender, race or color, ethnicity or national origin, age, disability, religion, sexual orientation, gender identity or expression, veteran status, or any other applicable characteristics protected by law. Apex aims to make apexcos.com accessible to all users. If you have a disability or special need that requires accommodation to navigate our website or complete the application process, please contact or (301) 417-0200. Likewise, feel free to reach out to us if you would like to view or discuss Apex policy related to equal employment opportunity or have any related concerns. EO/AA/VEV/Disabled Employer TO ALL RECRUITMENT AGENCIES: Apex Companies does not accept unsolicited agency resumes. Please do not forward resumes for any of our job postings to our career's sites, or to any employees of Apex Companies or affiliates. Apex Companies is not responsible for any fees related to unsolicited resumes.

Job Description Company Overview: Glosten is a naval architecture and marine engineering firm that has served the marine industry for over 65 years. We work in teams to accomplish exciting projects in a stimulating, fast-paced, and collegial environment. We are an employee-owned company drawn to unique and challenging marine projects. We have grown steadily and deliberately to a team of 120 employees who are ready to solve complex problems and think outside the box. We continuously strive to improve our business practices and technical performance to better serve the industry. We believe the secret to our success is our talented team and our culture of mutual respect and cooperation. Job Description We are seeking a talented Marine Electrical Engineer to join our marine engineering team. We are looking for candidates who: • Are passionate about the maritime industry., • Thrive in a culture of collaboration, innovation, and integrity., • Embrace a philosophy of client service by solving real-world problems clients face in the maritime industry, supporting their best interests and building lasting partnerships through reliable service and dependable solutions., • Design and develop electrical power system designs for marine vessels, ensuring compliance with industry standards, marine regulations, and best practices., • Conduct short circuit studies and protective device coordination studies., • Perform calculations for lighting system designs., • Create and review technical drawings, electrical power loads analysis, power system one-line diagrams, specifications, and documentation for regulatory review and shipyard cost estimating., • Lead engineering teams, assign tasks, provide technical oversite, manage scope and budget, schedule, and develop proposals., • Collaborate with cross-functional teams to ensure seamless integration of mechanical designs into vessels., • Stay updated on recent developments in electrical engineering and incorporate this knowledge into projects., • Minimum four (4) years of experience performing electrical engineering and design in a maritime design environment, consulting engineering experience is preferred. Equivalent experience in an industrial (factory, mining, power generation) and/or MW scale microgrid design environment will be considered as an alternative to maritime design experience., • Bachelor's degree in marine engineering or electrical engineering., • Professional Engineering (PE) Licensure in a relevant discipline is expected. Applicants without PE license who would be eligible to take the licensing exam in their first year may be considered., • Proficiency with CAD software (AutoCAD, Rhino3D or SolidWorks) and Microsoft Office software packages., • Proficiency with power systems analysis software packages (SKM (preferred), EDSA, eTAP, or EasyPower)., • Strong communication, technical writing, teamwork abilities, and excellent problem solving skills., • Must be authorized to work in the United States. Due to project restrictions, Glosten will only consider applicants with unrestricted access to work in the United States or those eligible for TN visas. Once 90 days has been successfully completed, associates may work in accordance with our hybrid remote work policy. Glosten is proud to provide equal employment opportunity to all employees and applicants for employment. To provide equal employment and advancement opportunities to all, employment decisions will be based on merit, qualifications, and abilities. Glosten does not discriminate in employment opportunities or practices on the basis of race, color, sex, age, religion, national origin, handicap, disability, sexual orientation, or veteran status in accordance with applicable state and federal laws. We are passionate about building and sustaining an inclusive and equitable working and learning environment for all associates. We believe every member of our team enriches our diversity by exposing us to a broad range of ways to understand and engage with the world, identify challenges, and to discover, design and deliver solutions. We encourage women, minorities, veterans, and individuals with disabilities to apply for this position. Visit our website () and our social media pages to learn more about who we are, our projects and clients, and what is happening at Glosten. Application Instructions Applications missing any of these documents will not be considered. To be considered for this position, you'll need to submit the following items: • Cover letter, • Resume Job Posted by ApplicantPro

Job DescriptionDescription: About Quantic Evans: Quantic Evans is a proud member of the Quantic™ Electronics Family Quantic™ Electronics, an electronic component company, is a trusted partner in military, aerospace, industrial, and commercial markets with over a century of combined experience as a reliable problem-solver. Being part of Quantic’s portfolio has allowed Quantic Evans to continue developing cutting-edge capacitor technology alongside other world-class technology companies representing mission-critical electronics’ future.? With sites in East Providence, RI, and Sanford, ME, Quantic Evans manufactures high-energy density capacitors for demanding mission-critical applications. We have the most power-dense capacitor technology in the industry. We are routinely specified for defense, aerospace, and energy exploration applications where high reliability and SWaP (space, weight, and power) savings are critical design considerations.? Process Engineer Co-op, East Providence, RI Reporting to the Engineering Manager, the Process Engineer Co-op will be responsible for will the optimization, design, and improvement of our manufacturing processes. This position offers a unique chance to apply theoretical knowledge in a real-world setting and make meaningful contributions to our company's success. Duration: January 5th to July 10th Expected Hours: Full-time Monday to Friday Responsibilities: • Collaborate with the process engineering team to identify opportunities for improving manufacturing processes' efficiency, quality, and cost-effectiveness., • Assist in gathering data that would be used to characterize and differentiate our products., • Help design and develop new manufacturing processes or modify existing processes, ensuring compliance with safety and regulatory standards., • Participate in troubleshooting efforts to address operational issues, equipment failures, and deviations from process parameters., • Prepare technical documentation, including standard operating procedures (SOPs), process flow diagrams, and equipment specifications., • Collaborate with other departments, such as R&D, quality assurance, and production, to support process-related initiatives and projects., • Contribute to continuous improvement efforts by implementing lean principles, participating in root cause analysis, and suggesting innovative solutions., • Adhere to company policies, procedures, and safety guidelines to ensure a safe working environment for yourself and your colleagues., • Additional duties as assigned Requirements: Criteria For Success • Working on or completed a bachelor's degree in Mechanical, Chemical, Industrial, Electrical Engineering, or related field., • 1–2 years of experience in a manufacturing or production environment (internships, co-ops, or technical roles acceptable)., • Must be considered a U.S. Person eligible to work in the United States, • Must have reliable transportation and reside within a commutable distance., • Comfortable working hands-on with machines, tools, and operators., • Strong problem-solving and mechanical aptitude., • Willingness to learn and take initiative in a dynamic environment., • Effective communicator who can work well with production teams., • Detail-oriented and organized., • Familiarity with lean manufacturing or basic quality tools a plus., • Possess a collaborative team-oriented mindset and personality with a hands-on can-do attitude., • Able to develop, organize, and communicate clear objectives and metrics., • Capacity to communicate process updates, issues, etc., effectively with operators and team members., • A proactive and enterprising thinker able to switch tasks and prioritize projects as needed., • Attention to detail is critical., • Ability to make decisions using sound judgment while complying with policies, procedures, appropriate principles, and applicable state and federal laws and regulations., • Excellent planning, time management, and organization skills., • General office and manufacturing environment., • Exposure to hazards associated with manufacturing equipment and tools., • May require heavy lifting., • Requires manual dexterity and ability to manipulate small objects., • Repetitive hand movements for tasks like assembly or packaging., • Ability to lift, push, and pull up to 30 pounds, • Prolonged standing on hard surfaces during shift, • Walking to various stations or areas of the production floor., • Sitting, bending, stooping, pushing and pulling motions, • Ability to handle small tools, parts, and machinery with precision., • Visual acuity for reading measurements, assembly instructions, and monitoring equipment., • Hearing ability to detect alarms, machinery sounds, or verbal instructions in a noisy environment

Job DescriptionWoodard & Curran is a national engineering, science, and operations firm with a simple vision for clean water, a safe environment, healthy communities, and happy people. As an employee-owned company, we strive to cultivate teams that encourage collaboration in an inclusive culture. We seek talented individuals from all backgrounds to help us address a broad range of water and environmental issues. We prioritize our people, offering opportunities for professional growth, ownership, and flexibility. This commitment enables us to make a meaningful impact on our clients, communities, and the planet. Woodard & Curran is seeking a dynamic, client-focused SCADA Controls Automation Project Engineer to join our Water Team, supporting projects across the New England Region, including Massachusetts, Rhode Island, and Connecticut. In this role, you’ll collaborate with municipal clients to develop, implement, and manage a variety of water, wastewater, remediation, and some industrial projects, with a focus on automation and control systems. You’ll lead projects from planning through completion, supported by a team of project managers, technical managers, engineers, and operations staff to ensure delivery within scope, schedule, and budget. Regular client interaction is key—you’ll serve as a trusted advisor, keeping them and our project managers informed on project status and identifying future opportunities to enhance their operations. This position involves regular travel to job sites (typically within driving distance) to oversee and lead SCADA project startups, lead preconstruction and kickoff meetings, and maintain strong client relationships throughout the project lifecycle. Who are we looking for:The successful candidate will join a strong team of motivated individuals to execute projects for our municipal, industrial water, and wastewater clients. The candidate will serve as the lead for medium to large-scale implementation projects, which may be standalone or multidisciplinary SCADA projects. It is critical for the candidate to understand and meet project requirements while working within the project’s scope, schedule, and budget constraints. Because the candidate will interface with a wide range of internal and external stakeholders, they must possess strong communication and technical skills. Additionally, the successful candidate will mentor junior staff and contribute to initiatives that enhance performance and efficiency. Offering Flexible Hybrid Work Schedule Travel: Regional travel up to 80%. Occasional overnight travel.Just to name a few, these projects may include: • Design review and implement process control systems, • PLC / HMI upgrades and optimizations, • Develop and implement PLC / HMI systems for water and wastewater treatment plants., • Assist Practice leadership and project managers in the development of SCADA master plans for technology improvementsWhat you will be doing at Woodard & Curran:, • Perform site investigations to gather information about the client’s systems, equipment, and instruments to develop SCADA system architecture options and define the upgrade migration path for each option with associated cost estimates;, • Coordinate with Practice Leadership and Project managers on identifying and developing new SCADA opportunities, • Support the Project Manager in writing the technical content for proposals and client communications, • Be capable of working independently on small projects or leading teams on larger projects, • Provide Support for client SCADA systems, • Mentors and trains junior staff;, • Foster and maintain relationships with key clients;, • Coordinate and provide technical oversight of subcontractors and vendors, • Develop process logic for programmable logic controllers (PLCs) used to monitor and control water and wastewater treatment systems;, • Design graphical screens that represent process equipment and instrumentation in the human-machine interface (HMI) software packages used by our clients;, • Design graphical screens for the operator interface terminals (OITs) utilized in our SCADA systems;, • Use specialized software to create automated reports containing process information that is incorporated into regulatory reports and used by clients to monitor and evaluate operations., • Oversee and guide contractors in terminating wires, checking out and modifying equipment and instrument wiring connected to the SCADA system;, • Collaborate with Project Managers and Senior Engineers to prepare documents and presentations with minimal guidance and oversight;, • Configure and test instruments, including level, pressure, flow, temperature, process analyzers, and more, and connections to the SCADA system;, • Configure and commission SCADA computers, industrial networking hardware, including Ethernet switches, wireless access points, and licensed frequency radios;, • Participate in the testing and startup of the process equipment, instruments, and SCADA system to ensure the SCADA system monitors and controls the equipment as intended., • Train operations personnel on the use, maintenance, and troubleshooting of the SCADA system hardware, software, and installation;, • Perform QA/QC for deliverables produced by the design team and the code developed by the controls team., • Understands that safety is paramount and adheres to safety protocol; What you will need to succeed:, • BS in Electrical Engineering, Computer Systems Engineering, Industrial Engineering, Electrical Engineering or associated field;, • PE License or CAP (Certified Automation Professional) is a bonus;, • 5+ years’ experience in control system integration;, • Extensive experience with Allen-Bradley PLC hardware and software (other PLC experience is a bonus);, • Extensive experience with Allen-Bradley FactoryTalk, Schneider Wonderware, Ignition, GE Proficy iFix HMI software (other HMI package experience is a bonus);, • Experience configuring and developing graphics for OITs such as Allen-Bradley PanelView and Automation Direct C-More;, • Experience with automated reporting software (such as SyTech’s XLReporter and HachWims);, • Hands-on experience configuring, interfacing with, and troubleshooting instrumentation found in the water and wastewater industry;, • Strong electrical and mechanical aptitude;, • Experience with Microsoft Office suite (Teams, Word, Excel, PowerPoint);, • Computer networking experience (hardware and configuration) is a bonus;, • Experience in higher programming languages (VB, C++, Java, Python) is a bonus;, • Water/wastewater industry experience is a bonus.This role has the option for remote work, and the anticipated pay range is flexible, depending on factors such as the employee's primary work location, skills, experience, and education. The following examples illustrate how the pay range for the same role can vary based on different locations. Massachusetts: $100,000 - $130,000Rhode Island: $95,000 - $125,000Connecticut: $95,000 - $110,000 The anticipated pay range for this position is provided above; the final exempt salary or non-exempt hourly pay will depend on the candidate's experience level and a percentage-based geographic differential, considering the location where the candidate will be working. Geographic differentials recognize and reflect the cost of labor differences between geographic markets. #LI-TB1Employee Support & Benefits Retirement Savings:•401(k) Pre-tax or Roth Contributions: The company matches 100% of the first 3% of salary contributed Time away from work:•Observed holidays: Choose up to 9 holidays to observe annually•Vacation: Accrued based on years of experience and calculated on hours worked•Sick time: Paid sick time for non-work related illness or injury.•Parental leave: Up to 80 hours of Paid Parental Leave for child bonding Coverage and support for your needs and well-being:•Disability: Paid short and long term disability•Health: Medical plan options; plus dental and vision plans.•Life: Basic employee group life insurance and AD&D benefits; additional voluntary life insurance for employees and families is available through Sun Life.•Wellbeing: DarioMind assistance program combined with personalized mental health and wellbeing resources. Equal Employment OpportunityWoodard & Curran is an Equal Opportunity Employer. Individuals with Disabilities and Protected Veterans are encouraged to apply. We are committed to ensuring our employment practices are non-discriminatory and based solely on job-related factors. If you have a disability and need a reasonable accommodation to apply, please contact Beth Sweitzer. Inclusion & BelongingWe welcome individuals from all backgrounds to apply, as we believe that different perspectives and experiences enrich our workplace and enhance our ability to serve our clients and communities effectively. At Woodard & Curran, we are committed to fostering a respectful and inclusive work environment. We understand that the best solutions for our clients and communities come from a culture that nurtures the success and growth of all employees. As an employee-owned organization, our dedication to fostering growth, access and opportunity empowers us to serve our clients effectively and advance our mission of making a positive impact on the world. Our success is rooted in supporting our team members to reach their full potential, enabling us to deliver the most innovative, sound and effective solutions to improve our communities around us. Non-Solicitation Disclosure:Please be advised that we do not accept unsolicited resumes or candidate submissions from recruitment agencies. Any resumes or candidate profiles submitted without a signed contract in place will be considered unsolicited and will not be eligible for any referral fees. Recruitment agencies must have a valid, signed agreement with our company prior to following the submission process to consider potential candidates. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionDescription: BETA is seeking an experienced Senior Transportation Project Engineer to join our team. This position will play a key role in performing highway design, developing contract plans and documents and mentoring junior staff. This position will also collaborate across our multiple service areas, assist with business development, project pursuits, and coordinate projects with our clients. Responsibilities: • Perform engineering design, review, and preparation of contract documents, • Provide technical oversight mentoring junior staff, • Prepare and review contract documents and reports, • Collaborate with design team members and provide technical support Growth Opportunities: • BETA encourages and promotes employee advancement and career development, • Bachelor's degree in civil engineering, or related field, • 5 to 10 years of related engineering experience in highway design, stormwater management, ADA compliance, and roadway construction practices, • Proficient with AutoCAD Civil3D and Microstation OpenRoads Designer, • Experience with MUTCD, AASHTO, MassDOT design requirements, • Experience with RIDEM and CRMC permitting regulations, • Must be able to collect field data and measurements including but not limited to roadway, sidewalk, and utility assets; and perform asset inspections, • Must be able to lift/move objects weighing up to 40 pounds, • Must be able to perform field work in both hot and cold weather (rain and/or snow), • Must be able to stand or sit for long periods of time BETA Group, Inc. is a New England based consultant engineering firm and leader in the fields of transportation, traffic, structural, civil/site, and water/wastewater engineering; landscape architecture; urban design and planning; GIS/asset management; environmental sciences and permitting; and construction services. BETA is 100% employee-owned and offers an exceptional compensation and benefits package including: • Medical, Dental, Vision, and Additional Voluntary Life Insurance, • Short-Term & Long-Term Disability Coverage, • Medical & Dependent Care Flexible Spending Account (FSA), • Employee Stock Ownership Plan (ESOP), • Tuition Assistance, • Professional Development, • Employee Engagement Program

Job Description Protection & Control Engineer/Technician – Field Testing & Commissioning Travel-Heavy Field Role – Up to 80% Join a leading team supporting high-voltage substation projects across transmission, distribution, and generation environments. We’re looking for Protection & Control Field Testing Engineers at all experience levels to perform hands-on testing, commissioning, troubleshooting, and documentation of critical P&C systems. Candidates should expect five 10-hour workdays per week. What You’ll Do: * Test and commission P&C systems on high-voltage substations (15 kV – 500 kV) * Perform protective relay testing (SEL, GE, Basler, Beckwith) with Omicron or Doble test sets * Execute CT/PT verification, relay calibration, control scheme testing, and dynamic/static testing * Interpret electrical drawings, schematics, and logic diagrams; produce detailed field reports * Support Project Leads/Field Supervisors and manage clerical/project documentation What You Bring: * 5+ years in substation field testing (breakers, transformers, instrument transformers, P&C systems) * Proficiency with relay families: SEL-311L, SEL-387, SEL-487, SEL-421, SEL-351S, GE L90/D60, etc. * Experience with NETA, IEEE, NFPA, and related standards * Knowledge of test software: ProTesT, Protection Suite, ENOSERV RTS, Omicron Test Universe, AcSELerator Quickset * Ability to travel extensively (up to 80%) and lift 50+ lbs Preferred: * Bachelor’s in Electrical Engineering/Electrical Technology * Electromechanical relay testing and high-voltage commissioning experience (CTs, CCVTs, PLC/SCADA, DC systems) * IEC 61850 testing and commissioning experience Competitive pay and growth opportunities for skilled P&C engineers. Step into a role where every test, every relay, and every report matters.

What you will do Johnson Controls is seeking an Electronics Product Support Engineer to join our Fire Suppression Electronics team at our R&D Facility either in Cranston, RI or Marinette, WI. Our engineering teams are responsible for the design, development, certification, and ongoing support of fire protection products which aid in life safety and property loss mitigation. You will support existing products in automated fire detection and control systems for heavy-duty off-road mining vehicles, commercial kitchens, and/or firefighter air replenishment systems. You will support the manufacturing, commissioning, and field life-cycle of these products. Working with a team of passionate engineers, program managers, product line managers and other professionals, you will support world class life safety products that utilize digital, analog, and wireless technologies and develop your career through progressive technical challenges and leadership opportunities. Candidates must be commuting distance to Cranston, RI, or Marinette, WI, or able to relocate to these specific areas. How you will do it * Partner with both our technical services team to identify, investigate and resolve product field issues. * Collaborate with product design engineers to determine root cause and resolve product issues. * Work with our design engineers and suppliers to define end of line production test methods and equipment. * Configure firefighter air replenishment systems for specific installation sites through graphical coding. * Collaborate globally with electrical engineers, mechanical engineers, firmware developers, product management, and manufacturing operations throughout the development cycle. * Work with external suppliers, approval agencies, and design partners. * Work primarily in-office with flexibility to occasionally work from home as needed What we look for Required * 3+ years of product support or product development experience * Strong testing skills with significant testing experience * Proficient in root cause analysis and corrective action * Component level circuit analysis or design experience * Experience engaging with electronics and electro-mechanical component suppliers * Familiarity with graphical coding/visual based programming Preferred * Familiarity with firmware development methods * Experience with computer programming in C/C++, Python, or other high level programing language * Bachelor’s Degree in Engineering HIRING SALARY RANGE: $85,000 - $110,000 (Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location and alignment with market data.) This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at

Description Substation Senior Civil/Structural Engineer Leidos Engineering offers its knowledge and expertise over a wide area of cutting-edge energy technologies and independent oversight, combined with proven business acumen. Building our work for publicly- and privately-owned utilities, financial institutions and local governments, we are able to provide our clients with business insight into all sectors of the infrastructure industry. We are seeking a Licensed Senior Civil/Structural Engineer with 8+ years of experience with a utility consulting company doing design engineering and reviews. The candidate must have a strong educational background in design of steel structures, concrete structures, geotechnical engineering, site design, and foundations. Experience reviewing substation structure design, rigid bus design, foundation design, oil spill containment design, retaining walls, masonry control shelters, site design packages, and fire-walls is required. This position will consist of performing design reviews of the aforementioned civil/structural design components in support of the development of bid/construction packages for substation projects. Candidate will primarily function as a senior engineer performing design reviews on a regular basis, as well as developing junior staff members. This role will also consist of taking a lead engineer role on client projects, overseeing the work and ensuring quality control on design packages. Site-visits to client substation facilities are expected to be part of the work, along with occasional travel for client meetings and industry related events. Experience in front-facing client operations such as lunch and learns, and kick-off meetings if preferred. Candidate must comply with quality control and safe work practices and maintain compliance with project scope, schedule and budget expectations. This position will be a senior member of a design team comprised of engineers, designers, and drafting technicians. Qualifications • Bachelors of Science (BS) degree in Civil-Structural Engineering - Required, • Masters of Science (MS) degree in Civil-Structural Engineering (Preferred), • PE Licensure - Required, • Experience with Microsoft Word/Excel/PowerPoint & MATHCAD software, required, • Experience with STAAD.Pro, RISA 3D, FAD Tools, SAFE, SAG10, and LPILE software, required, • Familiarity with AutoCAD and MicroStation, required, • Strong analytical and technical writing skills, • Team player with ability to communicate with clients and staff, • Willingness to travel, up to 25% Work Location: Framingham, MA (hybrid) or Walled Lake, MI (hybrid) Grow with us! Through training, teamwork, and exposure to challenging technical work, let Leidos show you how to accelerate your career path. Apply today! PDSTLINE PowerDelivery If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. November 19, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $89,700.00 - $162,150.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #Featuredjob

Field Service Engineer (PERM or Temp-To-Perm) Location: East Providence, RI Salary: $80 - 95K (depending on experience) Bonus comp variable plan - depending on team performance Notes: Looking for candidates with Becton Dickinson Flow Cytometry and Hamilton Liquid handler experience There is also travel involved with this role to visit clients in the area - which will be 25-50% (and overnight in a lot of cases) In this role, you will be responsible for the troubleshooting, repair, maintenance, and calibration of complex analytical systems, ensuring optimal performance across biotechnology, pharmaceutical, chemical manufacturing, and environmental industries. Responsibilities •Perform diagnostic troubleshooting, repairs, and routine maintenance on a variety of complex analytical instruments, including: •HPLC, GC-MS, LC-MS systems from Agilent, Thermo Fisher, Waters, SCIEX, Shimadzu, Bruker, PerkinElmer, and others •Flow cytometers from BD Biosciences, Beckman Coulter, Thermo Fisher, Sony Biotechnology, and others •Liquid handlers and automation systems from Tecan, Hamilton, Beckman Coulter, Agilent, PerkinElmer, and others •Other laboratory instrumentation utilized in biotech, pharmaceutical, chemical, and environmental industries •Conduct preventative maintenance and calibration to ensure instruments meet manufacturer specifications and regulatory requirements. •Collaborate with scientists, lab managers, and technical teams to identify and resolve instrument performance issues. •Maintain detailed service records, calibration logs, and compliance documentation for audit readiness. •Provide technical support and training to end-users on proper instrument operation and best practices. •Assist in the installation and qualification (IQ/OQ/PQ) of new analytical instruments. •Stay up to date on emerging technologies, troubleshooting methods, and industry regulations. •Ability to travel up to 25-50% overnight within the assigned territory. •Be a customer-oriented professional, acting as a promoter of EquipNet in customer laboratories and proactively driving business growth. •Coordinate problem resolution with engineering, customer service, and other personnel to expedite repairs and improve response times. •Serve as a communication link between the customer and the company to ensure effective service delivery and strong client relationships. Requirements •Strong mechanical, electrical, and troubleshooting skills for analytical instrumentation. •Ability to diagnose complex system failures and implement solutions efficiently. •Excellent verbal and written communication skills to explain technical concepts to both experts and non-experts. •Strong organizational skills with attention to detail and compliance. •Ability to work independently and manage multiple service requests. •Ability to perform occasional lifting of equipment •Ability to work independently within a customer location while maintaining a high level of service. Experience and Education •Associate’s or bachelor’s degree in engineering, Instrumentation, Analytical Chemistry, Biomedical Engineering, or a related field (or equivalent experience). •3+ years of hands-on experience servicing and troubleshooting laboratory instruments in biotech, pharma, chemical, or environmental industries. •Prior experience with HPLC, LC-MS, GC-MS, or automation systems is highly preferred. •Experience with vendor software (e.g., MassLynx, Xcalibur, Empower, OpenLab, FlowJo, CytExpert, or equivalent) is a plus. •Knowledge of GLP/GMP compliance and industry regulations is desirable. •Well-developed PC skills, including Windows 2000/XP, Windows 7, Windows 10, and Microsoft Office Suite. •Possess a valid driver’s license. •* Hamilton Liquid Handlers experience required. •*Becton Dickinson Flow Cytometry experience required.

Mercor is hiring experienced Go Engineers to support a variety of high-impact research collaborations with leading AI labs. Freelancers will help improve AI systems through work extending coding benchmarks that reflect real-world development across diverse languages and domains. This is a unique opportunity to apply your engineering expertise toward shaping the next generation of intelligent systems. Key Responsibilities - Develop and validate coding benchmarks in Go by curating issues, solutions, and test suites from real-world repositories - Ensure benchmark tasks include comprehensive unit and integration tests for solution verification - Maintain consistency and scalability of benchmark task distribution - Provide structured feedback on solution quality and clarity - Debug, optimize, and document benchmark code for reliability and reproducibility Ideal Qualifications - 3–10 years of experience as a backend software engineer, ML engineer, or applied data scientist - Degree in Software Engineering, Computer Science, or a related field - Strong proficiency in Go - Experience with debugging, testing, and validating code - Comfortable with technical writing and attention to detail Project Timeline - Start Date: Immediate - Duration: 1 month - Commitment: Part-time (15–20 hours/week) - Schedule: Fully remote and asynchronous – flexible working hours Compensation & Contract - $90 per hour plus lucrative bonus per approved task (1 task takes approximately 1 hour to complete) - Median average pay inclusive of bonuses is $200/hr - Independent contractor - Daily payment via Stripe Connect Application & Onboarding Process - Upload your resume - AI interview: A short, 15-minute conversational session to understand your background, experience, and interest in the role - Brief assessment testing real-world coding ability, technical depth, and debugging approach - Follow-up communication within a few days with next steps and onboarding details About Mercor Mercor is a San Francisco-based company specializing in connecting elite professionals with cutting-edge AI initiatives. Our investors include Benchmark, General Catalyst, Adam D’Angelo, Larry Summers, and Jack Dorsey. Thousands of professionals across engineering, research, and creative fields have partnered with Mercor on frontier projects shaping the future of AI. Apply today and leverage your software engineering expertise to help build the future of AI-driven systems!

Mercor is hiring experienced frontend engineers to support a variety of high-impact research collaborations with leading AI labs. Freelancers will help improve AI systems through work extending coding benchmarks that reflect real-world development across diverse languages and domains. This is a unique opportunity to apply your engineering expertise toward shaping the next generation of intelligent systems. Key Responsibilities - Develop and validate coding benchmarks in React, TypeScript, or JavaScript by curating issues, solutions, and test suites from real-world repositories - Ensure benchmark tasks include comprehensive unit and integration tests for solution verification - Maintain consistency and scalability of benchmark task distribution - Provide structured feedback on solution quality and clarity - Debug, optimize, and document benchmark code for reliability and reproducibility Ideal Qualifications - 3–10 years of experience as a frontend engineer - Degree in Software Engineering, Computer Science, or a related field - Strong proficiency in React, Typescript or Javascript - Experience with debugging, testing, and validating code - Comfortable with technical writing and attention to detail Project Timeline - Start Date: Immediate - Duration: 1 month - Commitment: Part-time (15–20 hours/week) - Schedule: Fully remote and asynchronous – flexible working hours Compensation & Contract - $90 per hour plus lucrative bonus per approved task (1 task takes approximately 1 hour to complete) - Median average pay inclusive of bonuses is $200/hr - Independent contractor - Daily payment via Stripe Connect Application & Onboarding Process - Upload your resume - AI interview: A short, 15-minute conversational session to understand your background, experience, and interest in the role - Brief assessment testing real-world coding ability, technical depth, and debugging approach - Follow-up communication within a few days with next steps and onboarding details About Mercor Mercor is a San Francisco-based company specializing in connecting elite professionals with cutting-edge AI initiatives. Our investors include Benchmark, General Catalyst, Adam D’Angelo, Larry Summers, and Jack Dorsey. Thousands of professionals across engineering, research, and creative fields have partnered with Mercor on frontier projects shaping the future of AI. Apply today and leverage your software engineering expertise to help build the future of AI-driven systems!

Mercor is hiring experienced Python Engineers to support a variety of high-impact research collaborations with leading AI labs. Freelancers will help improve AI systems through work extending coding benchmarks that reflect real-world development across diverse languages and domains. This is a unique opportunity to apply your engineering expertise toward shaping the next generation of intelligent systems. Key Responsibilities - Develop and validate coding benchmarks in Python by curating issues, solutions, and test suites from real-world repositories - Ensure benchmark tasks include comprehensive unit and integration tests for solution verification - Maintain consistency and scalability of benchmark task distribution - Provide structured feedback on solution quality and clarity - Debug, optimize, and document benchmark code for reliability and reproducibility Ideal Qualifications - 3–10 years of experience as a backend software engineer, ML engineer, or applied data scientist - Degree in Software Engineering, Computer Science, or a related field - Strong proficiency in Python - Experience with debugging, testing, and validating code - Comfortable with technical writing and attention to detail Project Timeline - Start Date: Immediate - Duration: 1 month - Commitment: Part-time (15–20 hours/week) - Schedule: Fully remote and asynchronous – flexible working hours Compensation & Contract - $80 per hour plus lucrative bonus per approved task (1 task takes approximately 1 hour to complete) - Median average pay inclusive of bonuses is $200/hr - Independent contractor - Daily payment via Stripe Connect Application & Onboarding Process - Upload your resume - AI interview: A short, 15-minute conversational session to understand your background, experience, and interest in the role - Brief assessment testing real-world coding ability, technical depth, and debugging approach - Follow-up communication within a few days with next steps and onboarding details About Mercor Mercor is a San Francisco-based company specializing in connecting elite professionals with cutting-edge AI initiatives. Our investors include Benchmark, General Catalyst, Adam D’Angelo, Larry Summers, and Jack Dorsey. Thousands of professionals across engineering, research, and creative fields have partnered with Mercor on frontier projects shaping the future of AI. Apply today and leverage your software engineering expertise to help build the future of AI-driven systems!

Job Description SUMMARY Operates and services a variety of motorized equipment and hand tools. Performs manual labor and general airfield maintenance and construction as directed. Work is primarily performed outdoors, in all seasons and weather conditions, in close proximity to aircraft, on and around runways and taxiways. Class A CDL license required ESSENTIAL DUTIES AND RESPONSIBILITIES: include the following: • Operates and services a wide variety of motorized equipment used in general airfield construction and/or maintenance., • Operates light duty and heavy duty trucks., • Operates heavy motor equipment such as power sweepers, backhoe, front-end loaders and tractors., • Operates or rides in trucks and utility vehicles in the performance of job duties and to get from one job to the next; includes off-site locations., • Uses hand and/or motorized equipment such as chains saws, saws, brush cutters, weed trimmers and grinders., • Responsible for the proper care and use of assigned motor equipment, including washing, and checking fuel and fluid levels, tire pressure, lights and general condition., • Required to request repairs for equipment when needed., • Makes minor emergency repairs to the motor equipment and hand tools., • Performs manual labor as required to conduct airfield maintenance., • Accomplishes basic trade and construction work and assists the trades when required., • Responsible for proper and safe use of equipment., • Strictly adheres to security provisions at all times, including entrance and egress from gates., • Communicates on two way and aircraft radios according to procedure., • Performs snow plowing, sanding and deicing using large trucks and a variety of motorized and hand operated equipment., • Snow removal and/or snow emergency responsibility., • Must be able to normally be available to work weather emergencies after the regular workday. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Must possess at all times a valid Rhode Island CDL Class A and a Hoisting/Engineer Certificate (Restricted) (to be attained within 6 months of employment)., • Must have a basic knowledge of general maintenance methods routinely utilized at an airport., • Must demonstrate skill in operation and general servicing of heavy trucks and motor equipment., • Must have the ability to make emergency minor repairs to equipment., • Must have the ability to understand and carry out oral and written instructions. Must have high school diploma or GED. Internal candidates who possess the requisite Class A CDL license and a Hoisting Engineer (Restricted) certificate, will be given first consideration in filling vacancies provided s/he has at least two (2) years of experience operating/servicing heavy motor equipment and has completed one (1) year of employment at RIAC. External candidates should have three (3) years’ experience operating/servicing heavy motor equipment. CERTIFICATES, LICENSES, REGISTRATIONS: • Class A CDL. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Lift at least 50 pounds from the ground to waist level several times per day. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Extremes of heat, cold, wind, dust, and dampness may be encountered as the work is usually performed outdoors year-round., • Runways and taxiways may heighten the need for visual and aural acuity., • The use of safety equipment such as but not limited to seatbelt restraints, hard hats, and goggles may be routinely required. The Rhode Island Airport Corporation is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. Rhode Island Airport Corporation makes hiring decisions based solely on qualifications, merit, and business needs at the time. Be a part of one of the fastest growing airports in the country and support on the State’s biggest economic engines by joining the Rhode Island Airport Corporation (RIAC) which operates the State’s airport system. This is a Union position with generous compensation and benefits including the following: • Robust 414H retirement, 8% employee contribution with 8% company match, • Zero deductible medical plan that includes prescription coverage (also a health insurance waiver stipend), • Dental and vision insurance, • Company paid short and long term disability insurance, • Company paid $10,000 in life insurance, • Company paid $500 in Flexible Spending Account annually, • Generous vacation, personal and sick time plus 12 paid holidays, • Tuition reimbursement program

Job Description Are you highly motivated, hard-working, and seeking to join a growth-focused consulting & engineering firm? Are you looking for a company that will invest in your development and grow your professional skills? If so, consider a career with Apex! Powered by record sales, extraordinary client retention, strategic acquisitions, and an entrepreneurial spirit, Apex Companies is one of the fastest growing engineering and environmental consulting firms in the US. We were recently recognized by the Zweig Group as one of the fastest growing firms in the AEC industry. We take pride in providing our clients with exceptional service and have earned numerous awards for project excellence. We continue to grow, and we want you to grow with us. Our Northeast Division is a well-respected and award-winning group where career development, training, and mentoring co-exist with diverse civil, environmental, water resources, and traffic/transportation projects in a fast-paced and challenging work environment. Apex is seeking a talented Project Manager, with drinking water experience, for a hybrid position in Quincy or Woburn, MA or Providence, RI. The selected employee will provide technical leadership for a variety of water system design-related projects, including treatment plants, pump/booster stations, and water distribution systems. We are offering a sign-on bonus for this role and will consider relocation. Primary Responsibilities: • Manages project implementation with assigned project team and follows all company policies and operating procedures. This includes keeping the client informed of the on-going status of a project and providing adequate management, advice, and support to the members of the project team, • Initiates projects by developing proposals/scopes of work and project budgets for approval by the Principal. For assigned projects, completes project initiation documents that includes detailed scope/outline, budget, and schedule for completion., • Supervises and directs individuals or teams of technical staff on projects and assists in the training and technical development of staff by holding training seminars, providing technical guidance during project execution, and bringing new technical developments in-house., • Consults with other technical staff and Project Managers on technical challenges in the drinking water discipline while also providing independent technical reviews on projects for other water discipline leaders., • Oversees the technical accuracy of project through regular communications with project staff, review of plans, specifications, reports, and calculations to ensure compliance with the firm's standards., • Tracks all projects costs, including labor and expenses, versus the project, and ensures that invoices are issued to the client in a timely manner in accordance with company policy., • Other tasks may include proposal preparation, participating in project interviews, attending public meetings, developing fee proposals, preparing contracts and presenting information to new and future potential clients What we're looking for: • Bachelor of Science Degree in Engineering and 9+ years of related experience with increasing responsibility, or a master's degree in a relevant field with 8+ years of related experience., • Registered Professional Engineer or other Professional Registrations as appropriate for their primary field of expertise in State(s) where Apex does work or ability to obtain same by reciprocity., • Demonstrated ability to work effectively with clients, staff, subconsultants and contractors through effective leadership, and demonstrated written and verbal communication skills., • Strong understanding of state and federal regulatory framework and experience interacting with regulators in the local and technical areas where Apex does work., • Must have excellent written and verbal communication skills and a strong desire to manage and mentor junior staff., • Company-subsidized medical and dental., • Company-paid life, short, and long-term disability., • 401k match, tuition assistance, and more., • Cross-training and the ability to work on a variety of projects., • Performance-based bonuses or other incentives., • Working with the best and brightest in the industry., • 1,800+ employee national firm with 50+ locations across the US. Apex Job Title: Project Manager Req ID: 10785 We believe in equality for all and celebrate the diversity and differences of our employees, customers, and communities. We do not discriminate based on gender, race or color, ethnicity or national origin, age, disability, religion, sexual orientation, gender identity or expression, veteran status, or any other applicable characteristics protected by law. Apex aims to make apexcos.com accessible to all users. If you have a disability or special need that requires accommodation to navigate our website or complete the application process, please contact or (301) 417-0200. Likewise, feel free to reach out to us if you would like to view or discuss Apex policy related to equal employment opportunity or have any related concerns. EO/AA/VEV/Disabled Employer TO ALL RECRUITMENT AGENCIES: Apex Companies does not accept unsolicited agency resumes. Please do not forward resumes for any of our job postings to our career's sites, or to any employees of Apex Companies or affiliates. Apex Companies is not responsible for any fees related to unsolicited resumes.

Job Description Are you highly motivated, hard-working, and seeking to join a growth-focused consulting & engineering firm? Are you looking for a company that will invest in your development and grow your professional skills? If so, consider a career with Apex! Powered by record sales, extraordinary client retention, strategic acquisitions, and an entrepreneurial spirit, Apex Companies is one of the fastest growing engineering and environmental consulting firms in the US. We were recently recognized by the Zweig Group as one of the fastest growing firms in the AEC industry. We take pride in providing our clients with exceptional service and have earned numerous awards for project excellence. We continue to grow, and we want you to grow with us. Our Northeast Division is a well-respected and award-winning group where career development, training, and mentoring co-exist with diverse civil, environmental, water resources, and traffic/transportation projects in a fast-paced and challenging work environment. Apex is seeking a talented Project Manager to lead a variety of wastewater engineering projects throughout the state of Massachusetts. This position is hybrid and can be based out of Woburn or Quincy, MA or Providence, RI. We are offering a sign-on bonus and will consider relocation for the right candidate. Primary Responsibilities: • Manages project implementation with assigned project team and follows all company policies and operating procedures. This includes keeping the client informed of the on-going status of a project and providing adequate management, advice, and support to the members of the project team, • Initiates projects by developing proposals/scopes of work and project budgets for approval by the Principal. For assigned projects, completes project initiation documents that includes detailed scope/outline, budget, and schedule for completion., • Supervises and directs individuals or teams of technical staff on projects and assists in the training and technical development of staff by holding training seminars, providing technical guidance during project execution, and bringing new technical developments in-house., • Consults with other technical staff and Project Managers on technical challenges in the wastewater water discipline while also providing independent technical reviews on projects for other wastewater discipline leaders., • Oversees the technical accuracy of project through regular communications with project staff, review of plans, specifications, reports, and calculations to ensure compliance with the firm's standards., • Tracks all projects costs, including labor and expenses, versus the project, and ensures that invoices are issued to the client in a timely manner in accordance with company policy., • Bachelor of Science Degree in Engineering and 9+ years of related experience with increasing responsibility, or a master's degree in a relevant field with 8+ years of related experience., • Registered Professional Engineer or other Professional Registrations as appropriate for their primary field of expertise in State(s) where Apex does work or ability to obtain same by reciprocity., • Demonstrated ability to work effectively with clients, staff, subconsultants and contractors through effective leadership, and demonstrated written and verbal communication skills., • Strong understanding of state and federal regulatory framework and experience interacting with regulators in the local and technical areas where Apex does work., • Must have excellent written and verbal communication skills and a strong desire to manage and mentor junior staff., • Company-subsidized medical and dental, • Company-paid life, short, and long-term disability, • 401k match, tuition assistance, and more, • Cross-training and the ability to work on a variety of projects, • Performance-based bonuses or other incentives, • Working with the best and brightest in the industry Annual Expected Pay Range$95,000—$160,000 USD We believe in equality for all and celebrate the diversity and differences of our employees, customers, and communities. We do not discriminate based on gender, race or color, ethnicity or national origin, age, disability, religion, sexual orientation, gender identity or expression, veteran status, or any other applicable characteristics protected by law. Apex aims to make apexcos.com accessible to all users. If you have a disability or special need that requires accommodation to navigate our website or complete the application process, please contact or (301) 417-0200. Likewise, feel free to reach out to us if you would like to view or discuss Apex policy related to equal employment opportunity or have any related concerns. EO/AA/VEV/Disabled Employer TO ALL RECRUITMENT AGENCIES: Apex Companies does not accept unsolicited agency resumes. Please do not forward resumes for any of our job postings to our career's sites, or to any employees of Apex Companies or affiliates. Apex Companies is not responsible for any fees related to unsolicited resumes.

Job Description Are you highly motivated, hard-working, and seeking to join a growth-focused consulting & engineering firm? Are you looking for a company that will invest in your development and grow your professional skills? If so, consider a career with Apex! Powered by record sales, extraordinary client retention, strategic acquisitions, and an entrepreneurial spirit, Apex Companies is one of the fastest growing engineering and environmental consulting firms in the US. We were recently recognized by the Zweig Group as one of the fastest growing firms in the AEC industry. We take pride in providing our clients with exceptional service and have earned numerous awards for project excellence. We continue to grow, and we want you to grow with us. Our Northeast Division is a well-respected and award-winning group where career development, training, and mentoring co-exist with diverse civil, environmental, water resources, and traffic/transportation projects in a fast-paced and challenging work environment. Apex is seeking a talented Project Manager, with drinking water experience, for a hybrid position in Quincy or Woburn, MA or Providence, RI. The selected employee will provide technical leadership for a variety of water system design-related projects, including treatment plants, pump/booster stations, and water distribution systems. We are offering a sign-on bonus and will consider relocation for the right candidate. Primary Responsibilities: • Manages project implementation with assigned project team and follows all company policies and operating procedures. This includes keeping the client informed of the on-going status of a project and providing adequate management, advice, and support to the members of the project team, • Initiates projects by developing proposals/scopes of work and project budgets for approval by the Principal. For assigned projects, completes project initiation documents that includes detailed scope/outline, budget, and schedule for completion., • Supervises and directs individuals or teams of technical staff on projects and assists in the training and technical development of staff by holding training seminars, providing technical guidance during project execution, and bringing new technical developments in-house., • Consults with other technical staff and Project Managers on technical challenges in the drinking water discipline while also providing independent technical reviews on projects for other water discipline leaders., • Oversees the technical accuracy of project through regular communications with project staff, review of plans, specifications, reports, and calculations to ensure compliance with the firm's standards., • Tracks all projects costs, including labor and expenses, versus the project, and ensures that invoices are issued to the client in a timely manner in accordance with company policy., • Bachelor of Science Degree in Engineering and 9+ years of related experience with increasing responsibility, or a master's degree in a relevant field with 8+ years of related experience., • Registered Professional Engineer or other Professional Registrations as appropriate for their primary field of expertise in State(s) where Apex does work or ability to obtain same by reciprocity., • Demonstrated ability to work effectively with clients, staff, subconsultants and contractors through effective leadership, and demonstrated written and verbal communication skills., • Strong understanding of state and federal regulatory framework and experience interacting with regulators in the local and technical areas where Apex does work., • Must have excellent written and verbal communication skills and a strong desire to manage and mentor junior staff., • Company-subsidized medical and dental, • Company-paid life, short, and long-term disability, • 401k match, tuition assistance, and more, • Cross-training and the ability to work on a variety of projects, • Performance-based bonuses or other incentives, • Working with the best and brightest in the industry, • 1,800+ employee national firm with 50+ locations across the US #LI-JS1 Apex Job Title: Project Manager Req ID: 10786 Annual Expected Pay Range$95,000—$160,000 USD We believe in equality for all and celebrate the diversity and differences of our employees, customers, and communities. We do not discriminate based on gender, race or color, ethnicity or national origin, age, disability, religion, sexual orientation, gender identity or expression, veteran status, or any other applicable characteristics protected by law. Apex aims to make apexcos.com accessible to all users. If you have a disability or special need that requires accommodation to navigate our website or complete the application process, please contact or (301) 417-0200. Likewise, feel free to reach out to us if you would like to view or discuss Apex policy related to equal employment opportunity or have any related concerns. EO/AA/VEV/Disabled Employer TO ALL RECRUITMENT AGENCIES: Apex Companies does not accept unsolicited agency resumes. Please do not forward resumes for any of our job postings to our career's sites, or to any employees of Apex Companies or affiliates. Apex Companies is not responsible for any fees related to unsolicited resumes.

Job DescriptionWoodard & Curran is a national engineering, science, and operations firm with a simple vision for clean water, a safe environment, healthy communities, and happy people. As an employee-owned company, we strive to cultivate teams that encourage collaboration in an inclusive culture. We seek talented individuals from all backgrounds to help us address a broad range of water and environmental issues. We prioritize our people, offering opportunities for professional growth, ownership, and flexibility. This commitment enables us to make a meaningful impact on our clients, communities, and the planet. What’s in it for you: Woodard and Curran seek a dynamic, detail-oriented, and client-focused Professional Engineer to join our Water Team as a Project Manager. In this role, you will collaborate with our municipal clients to develop, design, and deliver various wastewater and drinking water projects across the New England region, including Massachusetts, Maine, Rhode Island, and Connecticut. Our New England team comprises a dynamic group of engineers, scientists, and design professionals who emulate Woodard & Curran’s values. Woodard & Curran creates a safe and fun environment for employees to thrive and collaborate with teams locally and nationwide to deliver clean water solutions to our clients. Who are we looking for:The ideal candidate will be technically focused, with solid experience in evaluating, planning, designing, and constructing drinking water and wastewater systems. Familiarity with a broad range of issues related to master planning, collections, treatment, and distribution systems is preferred. In collaboration with the Technical Manager, you will help lead the delivery of multiple projects, work directly with clients and internal teams, and support marketing and proposal efforts. Location: Canton, MA; Andover, MA; Northhampton, MA; Providence, RI; or Middletown CT Offering Flexible Remote/Hybrid Work Schedule: Expectation is 2 to 3 days in the office or onsite with clients. Travel up to 20%: Clients within the New England Region.To name a few, projects may include: • Drinking water distribution capacity analysis and design, • Drinking water treatment system upgrades, • PFAS treatment systems, • Lead and Copper Rule project initiatives, • Pumping station designs and rehabilitation, • Collection system assessments, design, and rehabilitation, • Municipal wastewater systems, including collection system infrastructure, pumping system hydraulics, and wastewater treatment processes, • Biosolids and renewable energy developmentWhat you will be doing at Woodard & Curran:, • Managing and executing work on water and wastewater system design, planning, and construction projects by leading and collaborating with multi-disciplinary teams within Woodard & Curran and with sub-consultants., • Determining the overall delivery approach for projects. Partner with senior leadership to develop technical approaches to larger projects., • Scheduling and tracking project budgets, milestones, and deliverables., • Utilizing Woodard & Curran’s Project Quality Assurance Program to execute all projects., • Demonstrating strong and proactive communication skills to keep the project management and technical team(s) updated as project work progresses., • Connecting and working with external suppliers and subcontractors to support project delivery., • Interacting with clients and representing the firm in a professional manner, • Visiting client sites for meetings, proposal development, and/or observing construction project status., • Coordinating with contractors and clients in the field during construction to ensure that projects are executed in compliance with the Contract Documents., • Interfacing with state and local regulatory agencies and permitting officials, • Conducting and coordinating QA/QC reviews on project deliverables to ensure Woodard & Curran technical excellence standards are met., • Collaborating with leadership and resource leaders on staffing projects., • Providing input on the development of Woodard & Curran design guidelines and standards., • Preparing and delivering presentations and training programs to internal and external clients and professional associations., • Supporting business development efforts under the direction of a client manager.What You Will Need To Succeed:, • 10-15 years of consulting engineering experience., • A B.S. Degree in Civil or Environmental Engineering or an M.S. Degree is preferred., • Registered Professional Engineer in Massachusetts, Maine, Rhode Island, and/or Connecticut (or ability to apply for reciprocity)., • The successful candidate will have project management and delivery expertise in civil and environmental engineering and an in-depth understanding of the engineering concepts associated with municipal water and wastewater systems., • Ability to manage multiple projects with demonstrated strong project management skills, • Well-versed in state and federal regulations., • Knowledgeable in state bidding laws and funding programs. Experience with Massachusetts Chapter 149 Bidding is preferred., • Excellent writing, communication, and presentation skills., • Demonstrated ability to conduct effective presentations to stakeholders is a plus., • Experience with proposal writing and developing project scope, budget, and schedulesThis role has the option for remote work, and the anticipated pay range is flexible, depending on factors such as the employee's primary work location, skills, experience, and education. The following examples illustrate how the pay range for the same role can vary based on different locations. Canton, MA: $150K - $170KAndover, MA: $140K - $165KMiddletown, CT: $135K - $155KProvidence, RI: $130K - $150K This position’s anticipated pay range is provided; final exempt salary or non-exempt hourly pay will be dependent on experience level as well as considering a % based geographic differential based on where the final candidate will be working. Geographic differentials are used to recognize and reflect cost of labor differences between geographic markets. #LI-TB1Employee Support & Benefits Retirement Savings:•401(k) Pre-tax or Roth Contributions: The company matches 100% of the first 3% of salary contributed Time away from work:•Observed holidays: Choose up to 9 holidays to observe annually•Vacation: Accrued based on years of experience and calculated on hours worked•Sick time: Paid sick time for non-work related illness or injury.•Parental leave: Up to 80 hours of Paid Parental Leave for child bonding Coverage and support for your needs and well-being:•Disability: Paid short and long term disability•Health: Medical plan options; plus dental and vision plans.•Life: Basic employee group life insurance and AD&D benefits; additional voluntary life insurance for employees and families is available through Sun Life.•Wellbeing: DarioMind assistance program combined with personalized mental health and wellbeing resources. Equal Employment OpportunityWoodard & Curran is an Equal Opportunity Employer. Individuals with Disabilities and Protected Veterans are encouraged to apply. We are committed to ensuring our employment practices are non-discriminatory and based solely on job-related factors. If you have a disability and need a reasonable accommodation to apply, please contact Beth Sweitzer. Inclusion & BelongingWe welcome individuals from all backgrounds to apply, as we believe that different perspectives and experiences enrich our workplace and enhance our ability to serve our clients and communities effectively. At Woodard & Curran, we are committed to fostering a respectful and inclusive work environment. We understand that the best solutions for our clients and communities come from a culture that nurtures the success and growth of all employees. As an employee-owned organization, our dedication to fostering growth, access and opportunity empowers us to serve our clients effectively and advance our mission of making a positive impact on the world. Our success is rooted in supporting our team members to reach their full potential, enabling us to deliver the most innovative, sound and effective solutions to improve our communities around us. Non-Solicitation Disclosure:Please be advised that we do not accept unsolicited resumes or candidate submissions from recruitment agencies. Any resumes or candidate profiles submitted without a signed contract in place will be considered unsolicited and will not be eligible for any referral fees. Recruitment agencies must have a valid, signed agreement with our company prior to following the submission process to consider potential candidates. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Summary Our client is a top notch and very well-established IT Solutions / MSP located in the Cranston, RI area and they are seeking to find an experienced Help Desk Technician. Some responsibilities are resolving escalated service request tickets, project tasks, and deployment upgrades. This position requires traveling up to 30% of the time and/or on-call/flexible hours to support our clients. This individual will work with other employees as a mentor and trainer to help develop additional skilled technicians. They pride themselves on the service and support they bring to each client in a timely manner. Duties & Responsibilities • Provide excellent customer service to our clients and partners, • Provides technical assistance to clients to resolve computer hardware and software problems via telephone or electronically from escalated tickets, • Simulates or recreates user problems to resolve operating difficulties, • Ability to manage multiple clients and projects simultaneously, • Ability to work in a fast-paced environment addressing issues promptly, • Provides support to clients in problem resolution, guides users through troubleshooting procedures, and develops troubleshooting scripts, • Provide remote assistance to end-users in the use of existing and new technologies, hardware, and software, • Setup of desktop and laptop computers, • Performs upgrades to hardware & software, • Understanding of IT security, with the ability to identify and escalate policy violations, • Recommends system modifications or hardware and software improvements to reduce or eliminate user problems, • Tracks client issues and resolutions to assure satisfaction and closure, • Contribute to company knowledge base and continually work to keep documentation up to date, • Performs other duties as assigned, • Microsoft CSP, AZURE, O365, • Required:, • Ability to travel as required (~30%), • Must be able to work flexible days/hours – some on-call duty, • Experience with the following manufactures networking equipment, including HP, Cisco, SonicWALL, Ruckus,, • Experience with Microsoft Server 2008+ deployment, migration, and management, • Desired:, • Experience with virtualization technologies VMWare and Hyper-V, • Previous job experience with project and vendor management, • PCI experience, • Required Technical Experience:, • Experience with all Windows Desktop OS, • Experience with Hosted Exchange, • Experience with Microsoft productivity applications, • Desired Technical Experience:, • Experience with Microsoft Server 2008+, • Familiarity with SonicWALL firewalls, Dell/HP/Cisco, managed switches, • Required Education:, • Minimum of 2 to 5 years of experience, • Background in Information Technology, Computer Science, Engineering, or Science or equivalent experience and/or certifications, • Advanced certifications (desired), • VMware Certified Professional(VCP), • Microsoft Certified Systems Administrator (MCSA), • Microsoft Certified Systems Engineer (MCSE), • Cisco Certified Network Associate (CCNA)

Job Description Summary Our client is a top notch and very well-established IT Solutions / MSP located in the Cranston, RI area and they are seeking to find an experienced Help Desk Technician. Some responsibilities are resolving escalated service request tickets, project tasks, and deployment upgrades. This position requires traveling up to 30% of the time and/or on-call/flexible hours to support our clients. This individual will work with other employees as a mentor and trainer to help develop additional skilled technicians. They pride themselves on the service and support they bring to each client in a timely manner. Duties & Responsibilities • Provide excellent customer service to our clients and partners, • Provides technical assistance to clients to resolve computer hardware and software problems via telephone or electronically from escalated tickets, • Simulates or recreates user problems to resolve operating difficulties, • Ability to manage multiple clients and projects simultaneously, • Ability to work in a fast-paced environment addressing issues promptly, • Provides support to clients in problem resolution, guides users through troubleshooting procedures, and develops troubleshooting scripts, • Provide remote assistance to end-users in the use of existing and new technologies, hardware, and software, • Setup of desktop and laptop computers, • Performs upgrades to hardware & software, • Understanding of IT security, with the ability to identify and escalate policy violations, • Recommends system modifications or hardware and software improvements to reduce or eliminate user problems, • Tracks client issues and resolutions to assure satisfaction and closure, • Contribute to company knowledge base and continually work to keep documentation up to date, • Performs other duties as assigned, • Microsoft CSP, AZURE, O365, • Required:, • Ability to travel as required (~30%), • Must be able to work flexible days/hours some on-call duty, • Experience with the following manufactures networking equipment, including HP, Cisco, SonicWALL, Ruckus,, • Experience with Microsoft Server 2008+ deployment, migration, and management, • Desired:, • Experience with virtualization technologies VMWare and Hyper-V, • Previous job experience with project and vendor management, • PCI experience, • Required Technical Experience:, • Experience with all Windows Desktop OS, • Experience with Hosted Exchange, • Experience with Microsoft productivity applications, • Desired Technical Experience:, • Experience with Microsoft Server 2008+, • Familiarity with SonicWALL firewalls, Dell/HP/Cisco, managed switches, • Required Education:, • Minimum of 2 to 5 years of experience, • Background in Information Technology, Computer Science, Engineering, or Science or equivalent experience and/or certifications, • Advanced certifications (desired), • VMware Certified Professional(VCP), • Microsoft Certified Systems Administrator (MCSA), • Microsoft Certified Systems Engineer (MCSE), • Cisco Certified Network Associate (CCNA)Employment Type: Full time Location: Cranston, RI