Offres support engineer à Rochester, NYCreate job alerts

Job Description Our Geotechnical department is looking for an Engineering Technician candidate to support our growing team in Rochester, NY. This employee will be an entry level. Salary is $17.50/Hour. Duties: • Perform visual classification and laboratory testing of soil samples collected during the subsurface investigation., • Perform geotechnical field services, which may include subsurface exploration layouts and geophysical surveys., • 0 - 3 years of progressive experience in the geotechnical field., • Prior experience in a geotechnical laboratory is preferred but not required., • Engineer in Training (EIT) is preferred but not required., • Driver's license required., • Position will require out of town field work based on workload (approximately 20-40%), • Position will require ability to lift 50 pounds., • Effective verbal and written communication skills., • Possess a high capacity for self-motivation., • Ability to apply engineering principles to a variety of geotechnical projects. Salary Range: $17.50 per hour The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Geotechnical department is looking for a candidate to support our growing team in Rochester, NY. This employee may be an entry level up to an associate level. Salary is negotiable based on prior experience and may be a wider range than listed based on discussions with supervisor and division director. Duties: • Perform geotechnical field services, which may include subsurface exploration layouts, drilling and test pit inspections, geophysical surveys, and construction monitoring., • Perform visual classification and laboratory testing of soil samples collected during the subsurface investigation., • Prepare subsurface exploration logs for use in geotechnical evaluations and reports., • Perform geotechnical evaluations and prepare report drafts for senior review. Requirements • B.S degree in civil engineering or related field., • 0 - 3 years of progressive experience in the geotechnical field., • Prior experience in a geotechnical laboratory is preferred but not required., • Engineer in Training (EIT) is preferred but not required., • Driver's license required., • Position will require out of town field work based on workload (approximately 40%), • Position will require ability to lift 50 pounds., • Effective verbal and written communication skills., • Possess a high capacity for self-motivation., • Ability to apply engineering principles to a variety of geotechnical projects. Salary Range: $60,000 - $75,000 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description M/E Engineering is interviewing for a Mechanical Design Engineer in our Rochester, NY office. We are a growing full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering, P.C. is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Performs assignments designed to develop skills of the Project Engineer/Design Engineer., • Utilizes engineering principles and standard designs to develop project designs and layouts., • Works with Senior Engineer, Project Engineer, Group Manager, Partner, Associate, and or Principal., • Independently performs assignments after instructions as to the general results expected., • Receives guidance on unusual problems and supervisory approval on developed plans., • Assists in the preparation of contract documents., • Plans, schedules, and conducts all phases of the work in a partial or a total project of moderate scope., • Performs conventional engineering work including standard designs., • Makes engineering calculations., • Develops elementary designs expanding on detailed schematic sketches., • Coordinates production and coordination with Senior Engineer/Designer or Project Engineer/Designer., • Associate degree, Bachelor of Science degree, or equivalent combination of education and experience., • The compensation range for this position is $62,400 to $72,500 per year. M/E Engineering provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, or any other characteristic protected by federal, state, or local laws. Powered by JazzHR UdCWHpz81h

Job Description M/E Engineering is currently interviewing for an Electrical Project Engineer in our Rochester, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Independently evaluates, selects, and applies standard engineering techniques, procedures, and criteria, using judgment in making minor adoptions and modifications to create schematic., • Assignments have clear and specified objectives and require the investigation of a limited number of variables., • Works with Principal, Associate and/or Senior Engineer/Designer to clarify project scope and schedule of deliverables., • Provides supervision and guidance related largely to overall objectives, critical issues, new concepts and policy matters., • Consults with Principal, Associate, Group Manager, or Senior Engineer concerning unusual problems and development., • Prepares project plans and specifications., • Supervises Designers and CAD Operators as related to tasks in progress., • Responsible for accuracy of design, specifications, drawings, etc., • Establishes project design concepts, design criteria and scope, space requirements, etc., • Makes engineering computations., • Projects cost estimations., • Coordinates between trades, architect, client, etc., • Responsible for equipment selection, sizing, etc., • Checks work of designers and CAD operators., • Reviews shop drawings., • Provides suggestions for improvements of M/E standards., • Supervises, coordinates, and reviews the work of Designers and CAD Operators., • Preferably has a Professional Engineering License (P.E.) or Engineer-in-Training (E.I.T.) working toward P.E. Licensing., • Bachelor of Science Degree or equivalent. Powered by JazzHR u4b4yxTDIC

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and support services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay The Sales Engineer II is responsible to engage an assigned list of existing and prospective accounts seeking to learn how Stark Equipment's Critical Power Division can help align Siemens product and service offerings with current and future facility infrastructure needs. This position will focus on providing design assistance, configure product offerings and help set pricing strategies for power distribution equipment on new applications and existing facility critical power equipment. Successful performance will be directly related to achieving revenue & gross profit targets & account management attainment benchmarks. What are we looking for: • At least 5 years of industry (power distribution) experience required., • Technical understanding of Electrical Power systems required., • Capability to mentor and foster a healthy team environment., • Ability to multi-task, work under pressure and meet deadlines required., • Must be able to deal with a large volume of work in a fast-paced, time-sensitive environment., • Ability to drive individual sales success., • In-depth knowledge of the market. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. This is a base salary, and the position also includes eligibility for a variable sales bonus. There is potential for a sales start-up assistance program. Job Posted by ApplicantPro

Job Description Protection & Controls Engineer Job Overview: A leading design, engineering, and project management organization is seeking a skilled Protection & Controls Engineer to ensure the safety and stability of power distribution networks. This role involves developing protection and control schemes, conducting power system studies, and collaborating with cross-functional teams to drive project success. This is a remote position offering a competitive salary, comprehensive benefits, and opportunities for professional development in a collaborative work environment. Key Responsibilities: • Collaborate with a multi-disciplinary team to create efficient and reliable electrical design packages for medium and high voltage substations., • Design and develop protection and control schemes for power distribution networks, ensuring safe and reliable system operation., • Conduct power system studies and analyses to identify potential issues and optimize performance., • Configure, maintain, and troubleshoot SCADA systems for monitoring and controlling power distribution networks., • Work closely with engineers, project managers, and field personnel to successfully implement protection and control solutions., • Provide technical support during installation, testing, and maintenance of systems., • Stay current with industry standards and best practices related to power system protection and control., • Minimum 5 years of experience in Protection & Controls engineering., • Experience within the power utility sector., • Proficiency with AutoCAD software., • Professional Engineering (PE) license is a plus., • Background in high and medium voltage systems. This role offers the chance to collaborate closely with diverse teams, including stakeholders and clients, to deliver high-quality projects. Our organization values professional growth, diversity, inclusion, and equal employment opportunities. We are committed to fostering a workplace that respects and values all backgrounds. Join our team to advance your career in the utilities industry and make a meaningful impact on infrastructure and energy systems.

Job Description We are currently hiring a Structural Engineer to join our Building Engineering Division in our Rochester, NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Structural Discipline provides structural engineering services with emphasis on new design, repair, and rehabilitation of constructed works, as well as investigation and performance evaluation. This position will work closely under the supervision of a Senior Structural Engineer to develop concepts, strategies, designs, drawings, specifications and reports. Individual must be able to work independently, as well as part of multi-discipline teams Candidates will work on an interesting variety of project types including K-12 and higher education, municipal, health care, large commercial, residential and other unique projects. This role can accelerate your career goals through immediate opportunities to lead, and comes with a competitive starting salary, incentive compensation, a comprehensive benefit package, and opportunities to become a LaBella shareholder. Duties • Perform complex design calculations for analysis and design of new and existing structural systems., • Prepare documents and reports from concept design through advanced technical design documentation., • Perform field investigations and document findings., • Work closely with other engineering and architectural disciplines., • Review shop drawings, respond to RFI’s and perform field observations during CA phase. Salary Range: $64,000 - $80,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • Bachelor of Science degree in Civil or Structural Engineering is required. Coursework in building systems engineering required., • Master of Science degree in Structural Engineering is preferred., • 3 years minimum experience with concrete, steel, masonry, and/or wood design is required., • Working knowledge of AutoCAD, Revit and structural engineering design software (RISA, SAP, and/or TSD) is required., • EIT required., • Excellent verbal and written communication skills. Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description We are currently hiring a Junior Mechanical Engineer in our Building Engineering Division at our Rochester office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Junior Mechanical Engineer will work with engineers as part of a project team to provide HVAC, plumbing, and fire protection designs, studies and technical support as required to fulfill project requirements. Typical projects will involve field work, design, and construction administration services. A successful candidate will be able to work well in a team to develop concepts, strategies, designs, drawings, specifications and reports for Building and Renovation projects. Duties: • Completion of calculations for design purposes, • Conduct field work to document existing conditions, • Development of drawings with building modeling software, • Work with senior engineers to complete project designs Salary Range: $60,000 - $68,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • Bachelor’s degree in Mechanical Engineering is preferred, • Experience with Revit or AutoCAD is preferred, • Experience in the A/E consulting business is a plus Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description We are currently looking for a P & C Engineer with a minimum of 5 years of experience in protection and control system detailed design, cost estimating, and bid document preparation for commercial, industrial, generation, renewables, and utility power systems. Duties • Create/modify one-lines, three-lines, control schematics, wiring diagrams, relay panel arrangements, and cable lists for substations, relay settings and configuration files., • Design auxiliary AC and DC power systems., • Create/modify technical specifications for major equipment, such power transformers, power circuit breakers, control house, panel construction specification and other high-voltage substation related materials;, • Coordinate with and provide technical assistance to SCADA engineers, substation physical engineers, and control design staff in order to fully develop system integration of protection, control, and monitoring systems;, • Perform basic calculations such as voltage drop, CT burden and saturation, lighting, and short circuit with minimal supervision;, • Apply field mark-ups of project as-built drawings with minimal supervision;, • Assist project manager to develop scope of work and conceptual design for the projects;, • Communicate and coordinate project activities with project manager, client, and others as needed;, • Provide leadership, guidance and instruction to less experienced staff members;, • Take personal responsibility for the quality and accuracy of one's work;, • Panel construction specifications (panel and interconnect wiring as well as panel layouts and elevations)., • Comfortable evaluating/reviewing control features, and communication/protocol aspects of protective relays, RTU’s, LTC Controllers, and other equipment as well as relay setting coordination., • A Bachelor’s Degree in Electrical Engineering or Electrical Engineering Technology., • 5 or more years of experience in protection and control system design, cost estimating, and bid document preparation for medium voltage electrical power projects., • A PE license from a US State (NC and NY) is preferred., • Successful track record designing Protection and Control Systems., • Knowledge of Institute of Electrical and Electronic Engineers (IEEE), NERC, NEC, NESC, NEMA, and ANSI standards used in designing substation is critical., • Experience with telecommunications, protective relaying, and automation (SCADA) is required., • Desired knowledge in low voltage coordination and arc flash studies., • Familiarity with Schweitzer Engineering Laboratories, General Electric and Basler equipment., • Periodic travel, ability to visit project sites., • Desired software knowledge in:, • ASPEN or similar, • Doble, • AutoCAD, • SKM, • ETAP Salary Range: $90,000 - $117,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description We are currently hiring a Jr. Structural Engineer to join our Building Engineering Division in our Rochester, NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Structural Discipline provides structural engineering services with emphasis on new design, repair, and rehabilitation of constructed works, as well as investigation and performance evaluation. This position will work closely under the supervision of a Senior Structural Engineer to develop concepts, strategies, designs, drawings, specifications and reports. Individual must be able to work independently, as well as part of multi-discipline teams. Candidates will work on an interesting variety of project types including K-12 and higher education, municipal, health care, industrial, commercial, and other unique projects. This role can accelerate your career goals through immediate opportunities to lead in a creative friendly environment, and comes with a competitive starting salary, incentive compensation, and a comprehensive benefit package. Duties • Determine structural loading criteria, perform complex design calculations, and prepare structural specifications., • Perform field investigations and document findings., • Work closely with other engineering and architectural disciplines., • Produce construction documents using Revit (BIM)., • Review shop drawings, respond to RFI’s and perform field observations during CA phase. Salary Range: $58,000 - $68,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • Qualified candidates must have a Bachelor of Science degree in Civil Engineering with structural coursework., • Engineering in Training Certificate (E.I.T.) required., • Master of Science degree in Structural Engineering is preferred., • 0 to 5 years of experience with concrete, steel, masonry, and/or wood design is required. Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job DescriptionDescription: Position Summary The Director of Engineering leads the strategic and operational direction of the engineering department within a dynamic contract manufacturing environment. This role is responsible for driving innovation, ensuring manufacturability, and optimizing engineering processes to meet client specifications, regulatory standards, and production goals. The ideal candidate is a collaborative leader with deep technical expertise and a passion for continuous improvement. Duties and Responsibilities · Develop and execute the engineering roadmap aligned with company growth and client needs. · Drive system based solutions for engineering processes for redundancy and coverage. · Represent the company as technical interface with clients. · Function as continuous improvement lead for the Company. · Define and implement world class standards for work instructions and quality control plans and implement companywide. · Develop, train and guide engineering personnel to achieve company engineering goals. · Ensure timely and cost-effective execution of engineering projects. · Identify and implement KPIs to drive thruput improvement for engineering releases to the shop floor. · Serve as a technical liaison with clients, translating requirements into manufacturable solutions. · Partner with operations, quality, and supply chain teams to ensure seamless production. · Support business development with technical input during client onboarding and quoting. · Serve as resident expert and set standard expectations for all manufacturing engineers to achieve identified outcomes. · Ensure engineering practices comply with ISO, FDA, and other relevant standards. · Oversee documentation including process flows, work instructions, and validation protocols. · Evaluate and implement new technologies, automation, and digital tools to enhance capabilities. · Lead and instruct others on continuous improvement initiatives across engineering and production processes. · Other duties as assigned. Requirements: Position Qualifications · Bachelors degree in Engineering or related discipline is a plus · 10 plus years of experience in hands on machining (mills and lathes) · 3+ years of experience in Project Management. Knowledge, Skills, and Abilities · Strong communication skills, both written and verbal · Excellent problem-solving skills · Attention to detail and accuracy. · Proficient in Microsoft Office. · Ability to work independently and as part of a team. · Flexibility and adaptability to changing priorities and deadlines. · Confident decision-making ability · Capable of participating in cross-functional settings and working with support functions, manufacturing, quality engineer, and facilities. · Support cost reduction & continual improvement activities. · Analyze raw data and generate usable reports. · Knowledge of print reading and understanding of common GD&T practices. · Knowledge of materials and their chemical and physical properties.

Job Description K&A Engineering Consulting – is a privately held company, providing comprehensive consulting, engineering and design, program/project management, construction management, and support services to power utility and industrial clients. Specializing in substation, transmission, distribution, distributed energy resources, and EPC services, we excel in solving complex challenges with precision-driven solutions. We pride ourselves on employing top talent, fostering a culture of excellence, and building meaningful relationships with clients and employees. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Electrical Designer to join our team at K&A Engineering in Rochester, New York]. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • CAD work during the conceptual engineering phase of the project, • Provide support during the detailed engineering phase of the project by drafting key concepts needed to convey intent to the design engineer as needed, • Review a sample of all drawings supplied by detailed engineering firm to ensure compliance with Customer’s CAD standards, this includes items such as:, • Border and revision procedures and compliance, • Line and text style weights, fonts, heights,, • Overall drawing format issues, • Proper use of CAD layers in drawings, • 5 years or more of CAD experience, • Associates degree preferred or equivalent work experience, • Utilities background preferred, • Proficient with AutoCAD and MicroStation. Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with Company Match), • Lifestyle Spending Account (LSA), • Paid Parental Leave, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, Parking and Transit Reimbursement, and Pet Insurance, • Long-Term Disability, Short-Term Disability, and Life Insurance The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job DescriptionDescription: Shape the future of infrastructure through innovative highway and bridge engineering Are you an experienced Transportation Project Manager ready to lead high-impact civil engineering and transportation infrastructure projects? Fisher Associates seeks a motivated professional to manage and deliver innovative highway and bridge design solutions. Whether you’re a licensed Professional Engineer (PE) or an EIT nearing licensure, this is your opportunity to advance your leadership career and drive critical infrastructure projects that improve mobility and safety. At Fisher Associates, we support your growth, leadership, and innovation—your success is our priority. Ready to advance your career and shape the future of infrastructure? Apply now to join Fisher Associates! About Fisher Associates Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Proactively pursue new business with existing and prospective clients by delivering exceptional service, promoting Fisher’s capabilities, and building lasting relationships., • Successfully lead mid-to-large-scale transportation projects from initial setup through planning, safety analysis, and project kick-off., • Manage project budgets, scope, schedule, and staffing to ensure successful and timely project delivery., • Lead design strategy and collaborate with teams, clients, partners, and stakeholders to align with client goals and ensure seamless project delivery., • Oversee project billing, client updates, QA/QC of deliverables, and project closeout., • Provide clear direction, motivation, and mentorship to team members., • Prepare winning project proposals and serve as primary client contact throughout the process., • Successfully navigate and implement complex public processes and municipal approvals., • Represent Fisher Associate’s in professional organizations, business boards, and community activities. Your Impact Matters, Your Career Thrives. Work on engaging projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Senior Transportation Project Manager • B.S. degree in Civil Engineering (Master’s preferred), • 10+ years in civil transportation engineering, including project management of DOT-funded highway and bridge projects, • Professional Engineering License (PE) preferred or ability to obtain it, • Proven client relationship and business development skills in transportation sector, • Proficiency in MS Office; MicroStation preferred, • Familiarity with NYDOT or PennDOT design standards preferred, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines, • Foster trust and collaboration through integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job Description RED-Rochester is a multi-utility generation plant and district energy supplier to one of the world’s most comprehensive industrial parks: the Eastman Business Park. Supporting a 1,200-acre campus, RED-Rochester owns and operates the utilities, infrastructure, technical services, support services, space and complementary regional resources to benefit a wide range of industry verticals. RED-Rochester is seeking a Utilities Engineer for Electrical Systems and Power Distribution. This role is an important position on the RED-Rochester team that provides stewardship and technical guidance for the operation, maintenance, improvement, and expansion of the Eastman Business Park microgrid in Rochester, New York. The Utilities Engineer shall be the senior technical resource for RED’s overall electrical generation and power distribution systems. Essential Duties and Responsibilities: • Lead in the development and maintain a long-range strategic master plan for the operations, maintenance, hardening, and future expansion of the Eastman Business Park electrical distribution system to meet new customer loads and increasing electrification of RED’s utility assets., • Function as the lead technical resource providing direction in the areas of medium voltage (600V to 34.5KV) distribution equipment, substations, transformers, switchgear, cable, motors and turbine generators., • Provide technical support in the area of low voltage (110V to 600V) distribution equipment, variable frequency drives, and motors., • Provide power systems analysis for load flow and voltage drop, short circuit studies, equipment protection, and coordination, and arc flash studies. Knowledgeable with SKM Power Tools for Windows. Provide power quality analysis as needed relating to harmonics and system disturbances., • Project Management and electrical engineer support for projects both RED originated and customer-driven. This includes oversight of contract project engineers and construction contractors., • Provide Engineering assistance for the day-to-day operations and maintenance of the RED-Rochester low and medium voltage systems., • Coordinate NYISO generator modelling and other NYISO technical requests for market participation as a Behind the Meter Net Generator., • Interface with the local utility to coordinate operation of and changes to the utility interconnect., • Provide Electrical Engineering assistance to all RED operating departments pertaining to building systems. Systems to include HVAC, reliable power, general lighting & power, IT cabling, cameras/security, fire alarms, UPS, etc., • Provide technical guidance to RED’s EHS group relating to electrical safety compliance with applicable NFPA standards.Education/Experience:, • Bachelor’s degree in Electrical Engineering, • Experience in, manufacturing/industrial sites, power generation, power distribution, utility interconnects, and/or business development preferred., • 7 to 10 years’ related experience in electrical engineering, utilities, construction and design of power plants, cogeneration, power distribution, and/or other multi-disciplinary, energy-intensive industrial processes.Qualifications, • Minimum 10 years’ experience in the engineering, construction and design of power plants, cogeneration and/or other multi-disciplinary, energy-intensive industrial processes, • Proficient in MS Office, • New York State PE License is expected for this position. Preferred Certifications/Licenses:, • New York State PE License is expected for this position. Skills/Competencies: • Project management experience in capital or capitalized maintenance projects., • Good communications skills, both verbal and written across the RED-Rochester technical support, operations and maintenance teams, • Ability to deal with outside engineers, contractors and vendors ., • Proficiency in Microsoft Office suite, including Excel and Teams., • Use of Bluebeam Revu, Navisworks, AutoDesk/AutoCAD and Maximo., • Familiarity with SKM Systems Analysis software for Power Systems and Arc Flash. Ability to self-perform modeling a plus., • Strong technical knowledge in the areas of Low (110V to 600V) and Medium (600V to 34.5KV) voltage systems, equipment and metering., • Ability to plan and see the “big picture”. Must be a “results-driven, self-starter” with the desire to bring creative solutions to a dynamic operating environment., • Ability to define problems, collect data, establish facts, and draw valid conclusions., • Dedication to highest levels of utility service reliability and customer service, • Ability to work scheduled and unscheduled overtime and respond to off-hour call-ins for emergency support. Work Environment: • Industrial and office environments., • Must work at times in dirty and noisy areas.

Job DescriptionDescription: Job Title: Principal Optical Engineer Department: R&D – Optical Reports To: VP of Advanced Optics Work Location: Onsite-Hybrid Salary Range: $100,000 - $140,000 FLSA Status: Exempt Featured Benefits: Medical, Dental, Vision, 401(k), FSA/HSA, Patent Incentives, Tuition Assistance, PTO, Life & Long-Term Disability Insurance, and more. About Us: Founded in 1997, Vuzix (NASDAQ: VUZI) is a growing, dynamic company that specializes in the design, manufacture and sale of smart glasses and augmented reality (AR) technologies and products for the enterprise and consumer markets. Company products include wearable displays and computing devices that offer a portable, high-quality viewing experience for applications in augmented reality, digital information, utility, and entertainment. Position Summary: The Principal Optical Engineer will support R&D, new product development and production while directly reporting to the R&D/Optics group. It will be their responsibility to work within multidisciplinary teams to design, build and test optical mounting structures, alignment mechanisms and housings. They will be solely responsible for all reliability modelling and testing with respect to optical components and assemblies. This position will also support the functions of the R&D – Optical Department to meet the requirements of the relevant ISO 9001:2015 standards based on the quality objectives established by Top Management. Essential Duties and Responsibilities: • Oversee test lab and provide optical engineering expertise., • Establish test procedures, processes, and documentation., • Review and organize test data., • Subject expert for geometric optics, LED illuminators, backlights, conventional micro-displays, collimators and concentrators, holographic systems, optical interference coatings, injection molding, lens design, and high precision optics design, fabrication and assembly., • Research and understand human factors and implement intelligent design choices for head mounted display systems., • Generate complete system documentation and provide input to technical proposals to effectively communicate designs and/or approaches to internal and external customers., • Validate system performance to prove the technical design through analysis, simulation, and laboratory testing., • Ensure proper procedures and methods are used by other members of the design team by providing a value-added quality review., • Independently develop and implement corrective action to product and procedural problems., • Communicate with the customer suppliers, and internal management as the technical expert on projects to effectively interface with all facets of decision-making personnel and customer management. To perform this job successfully, an individual should demonstrate the following competencies: • Written Communication – Read and interpret written information effectively, write clearly and concisely, adapt writing style for different audiences., • Verbal Communication – Give focused attention to what others are saying, take time to understand what and respond when appropriate without interrupting, speak clearly and effectively express ideas and opinions, adapt and react professionally in both positive and negative situations., • Teamwork & Collaboration – Balance team and individual responsibilities, consider others’ views objectively and with openness to changing your own, give and encourage feedback, contribute to a positive team dynamic, prioritize team success over personal interests, work effectively across departments toward company goals., • Professionalism – Interact with others in a considerate manner, follow through on commitments, react well under pressure and preserve confidentiality, control emotions, and accept responsibility, maintain focus on solutions and treat others with respect and consideration regardless of their status or position., • Motivation & Initiative – Demonstrate persistence and ability to adapt to changes in daily workflow and overcome obstacles, ask for and offer help when needed, work independently when required, volunteer readily and look for ways to improve and create successful outcomes, positively contribute to overall work environment., • Minimum of 8 years of detailed experience working in a product design environment., • Strong organizational, time management, and leadership skills; and the ability to successfully manage multiple tasks in a dynamic environment., • Familiarity with MS Project., • Familiarity with optical measurement techniques., • Must be able to demonstrate out-of-box thinking for unique problems and develop concepts into products., • Master’s degree in Optical Engineering, Physics or equivalent., • Familiarity with sequential and non-sequential programs like Zemax, Code V, etc. Travel: Travel including international travel up to 25%, if possible. Physical Demands: Frequently required to sit, speak, hear, see, and perform repetitive motion (data entry). Occasionally required to lift or carry (10 lb. minimum). Reasonable accommodations will be made available if applicable.

Job DescriptionDescription: Highway Design Engineer – Civil/Structural | Shape the Future of Transportation Ready to build the highways of tomorrow? Are you a skilled Highway Design Engineer with a passion for designing safe, efficient, and innovative transportation systems? Join our dynamic team of civil and structural engineering professionals where your expertise in roadway design, highway infrastructure, and transportation engineering will directly impact the communities we serve. In this role, you’ll play a key part in designing highways, roadways, intersections, and other critical transportation infrastructure projects. You’ll collaborate with multidisciplinary teams to solve complex engineering challenges and ensure all designs meet industry standards, environmental requirements, and safety regulations. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Demonstrated ability to efficiently manage highway design projects, including drainage, alignments, and related tasks., • Prepare and maintain comprehensive design plans, detailed specifications, technical reports, and accurate cost estimates., • Ensure designs adhere to state and local standards, regulations and safety codes., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Collaborate with internal teams, clients, subconsultants and agencies to ensure seamless project delivery., • Proactively support project managers with schedules, documentation, and presentations. Your Impact Matters, Your Career Thrives. Work on engaging Highway Design Engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid #LI-CA1 Requirements: What You Bring, Your Expertise as a Highway Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5-10 years of transportation experience Highway Design Engineering experience preferred, • EIT required, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in MicroStation, STAAD, OpenRoads, and Bridge Design Software preferred., • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred), • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines., • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job Description Founded in 1994 and celebrating 30 years in business, Mindex is a software development company with a rich history of demonstrated software and product development success. We specialize in agile software development, cloud professional services, and creating our own innovative products. We are proud to be recognized as the #1 Software Developer in the 2023 RBJ's Book of Lists and ranked 27th in Rochester Chamber’s Top 100 Companies. Additionally, we have maintained our certification as a Great Place to Work for consecutive years in a row. Our list of satisfied clients and #ROCstar employees are both rapidly growing— Are you next to join our team? Mindex is looking to expand our established Data & Analytics team with a collaborative Senior Business Intelligence Engineer who thrives on transforming data into powerful, user-centric products. As a key member of the team, you will contribute directly to enhancing the embedded analytics capabilities across our SaaS products. This is more than just a dashboard-building role; you will partner with your fellow engineers and stakeholders to consult on requirements, design intuitive experiences, build insightful data products, and to support our rapidly growing community of customer authors, empowering them to unlock the full potential of their data. Essential Functions: • Design, build, and maintain intuitive dashboards and reports in AWS QuickSight that support the needs of business and technical stakeholders., • Work with external/internal stakeholders to gather requirements and convert them into functional reporting solutions., • Troubleshoot discrepancies in data accuracy across visualizations, • Document dashboard logic, data sources, and data models for internal and external use, • Translate business requirements into actionable data models, working closely with data engineers and analysts to ensure reliable, well-structured datasets., • Collaborate with the Data & Analytics team to design, refine and deliver visualizations that meet stakeholder needs, • Create and manage semantic data layers, custom visuals, calculated fields, filters, and parameters within QuickSight. Education & Experience: • 4-year degree in Science, Technology, Engineering, or Mathematics "STEM" or an equivalent combination of education and relevant work experience preferred, • Hands on experience designing, building and delivering customer facing dashboards, • Worked in a domain with strict compliance requirements (FERPA, HIPPA, etc.), • Proficiency in AWS QuickSight, including SPICE, data prep, visuals, calculated fields, and dashboard sharing/security., • Strong SQL skills and experience working with relational databases and data warehouses, • Solid understanding of data modeling concepts (e.g., star schema, normalized vs. denormalized data)., • Familiarity with data governance and access control best practices within a BI environment., • Familiarity with Highcharts or similar JavaScript-based charting libraries is a plus., • Ability to manage multiple priorities, meet deadlines, and deliver high-quality work in a fast-paced environment., • Highly organized, able to work independently if needed, • Strong analysis, critical thinking, and problem-solving skills, • Ability to work cross-functionally with both business users and technical teams, including experience in requirements gathering., • Medical Insurance (with a free option!), • Dental Insurance, • Vision Insurance, • Company Paid Life and AD&D Insurance, • Optional Additional Life Insurance, • Company Paid Short-Term Disability Insurance, • Company Paid Long-Term Disability Insurance, • Medical and Dependent Care Flexible Savings Accounts (FSA), • Health Savings Accounts with Company Contributions, • Optional Hospital Indemnity, Accident and Critical Illness Insurance as well as Legal Assistance Our Perks: • Flexible Time Off, • Eight Paid Holidays, • Pre-tax and Roth 401(k) Options with Company Match, • Investment in Professional Development including a license to Udemy training courses and leadership training, • Employee Assistance Program, • Adoption Assistance, • Pet Insurance Discounts, • Tickets to local sporting events, • Team building events, • Holiday and celebration parties The band range for this role takes into account the wide range of factors that are considered in making compensation decisions including but not limited to skill sets, education, experience, training, certifications, internal equity, and other business and organizational needs. It is not typical for an individual to be hired at, or near, the top of the range for their role; and compensation decisions are dependent on the facts and circumstances of each case. The range for this role is $90,000 - $140,000. Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor, or take over sponsorship of an employment Visa at this time. Physical Conditions/Requirements • Prolonged periods sitting at a desk and working on a computer, • No heavy lifting is expected. Exertion of up to 10 lbs.

Job DescriptionSalary: $68K-$80K Who we are: Safran Electronics & Defense (SED) is an international company with 10,000 employees, built on proven expertise in technologies that underpin sovereignty. By combining human and artificial intelligence, we develop the products and services that empower aerospace and defense players to observe, decide and guide, all over the world. Safran Electronics & Defense also supports fellow Safran companies by sharing its state-of-the-art electronics skills and expertise. Within Safran Electronics & Defense, our Timing & Synchronization division () is the leader in R-PNT (Resilient Positioning, Navigation & Timing) solutions. We supply military and commercial industries worldwide with accurate timing technologies and equipment (Time Servers, Inertial Navigation System), as well as ultra-precise timing and frequency distribution for applications requiring a high degree of reliability and accuracy across IP time distribution standards. In this way, we contribute to the performance of critical operations support. Whenever accuracy, safety, security and reliability are critical, the solutions of Safran Electronics & Defense leads the way. Enterprise Solutions Engineer day to day: • Solution Design & Delivery, • Collaborate with internal stakeholders to define business challenges, uncover root causes, and document functional and technical requirements., • Design and implement end-to-end business solutions from proof-of-concept to production using a mix of enterprise systems, cloud tools, and custom applications, • Serve as the primary owner of the solution lifecycle: development, testing, user acceptance, deployment, support, and documentation, • Technology Enablement, • Leverage the Microsoft Power Platform (Power Apps, Power Automate, Power BI, Dataverse) to build low-code/no-code solutions., • Explore and implement emerging technologies, including AI, machine learning, and automation frameworks, to drive business process improvements., • Integrate disparate enterprise systems through APIs, middleware, or ETL tools as needed., • Data Management & Visualization, • Perform data analysis to support solution design and business decision-making., • Create dashboards, visualizations, and reports that enable self-service insights and operational transparency., • Customer Engagement & Collaboration, • Act as a trusted partner and technical advisor to internal business units., • Facilitate user training, documentation, and change management to ensure successful solution adoption., • Provide post-deployment support, incident resolution, and enhancements. What you Bring to Safran: • Bachelor's degree in Information Systems, Computer Science, Engineering, or related field; equivalent experience considered., • 3+ years of experience in a technical solution delivery role (e.g., Systems Engineer, Business Systems Analyst, Applications Developer)., • Proven experience with Microsoft Power Platform (Power Apps, Power Automate, Power BI)., • Strong analytical and problem-solving skills with attention to detail., • Working knowledge of databases (SQL Server, PostgreSQL, etc.) and API integration., • Experience with UAT coordination, deployment strategies, and user documentation., • Excellent communication and interpersonal skills; ability to translate technical concepts to non-technical stakeholders. Preferred Qualifications: • Experience implementing AI solutions (e.g., Azure AI, OpenAI, Copilot)., • Familiarity with enterprise business systems (ERP, CRM, HRIS, etc.)., • Experience in process mapping, Lean/Six Sigma, or continuous improvement methodologies., • Background in Agile or DevOps environments.

Job DescriptionSalary: $100,000-$150,000 (Annually) The Opportunity: As a Lead Systems Engineer, you will take ownership of the innovation, pursuit, and execution of US Government and DoD technology development in the areas of APNT (Assured Precision Navigation and Time), GNSS Simulation, and Inertial Navigation Systems to bolster Safran Federal Systems, and Safrans, long term product and sales goals. Job Responsibilities: • Define and manage system requirements and specifications throughout the engineering design process., • Leverage a strong technical background enabling interaction with customers systems engineers, hardware/electrical/software engineers, and other technical staff members., • Provide hands-on technical guidance, support and decision-making authority to project teams throughout the development and deployment phases., • Lead system design reviews, technical assessments, and risk analysis activities., • Analyze data and use data to verify system requirements and to validate system performance., • Ensure compliance with industry standards, best practices, and regulatory requirements., • Provide hands-on, data-driven, troubleshooting and root cause analysis, • Create and maintain streamlined technical documentation for our customized solutions for future utilization (i.e. manuals and interconnect drawings)., • Generate cost baselines and work breakdown structures to support internal cost and price reviews., • Mentor and strengthen the Systems Engineering discipline through continuous improvement and knowledge transfer activities, • Collaborate with stakeholders to gather and analyze requirements, ensuring alignment with business goals and regulatory standards Assist with the development of new Government and DoD business, directly with the Government and indirectly through large system integrators through a thorough understanding of the factors that are critical to success of the customers mission., • Participate in industry working groups related to inertial and GNSS navigation, and simulation., • Collaborate on proposals, RFI responses, whitepapers, etc., • Present technical material at professional conferences as required. What You Bring to Safran Federal Systems: • A minimum of 6 years of experience in a related role., • Bachelor of Science degree in aerospace engineering, software engineering, computer engineering, electrical engineering, or related engineering degree from an accredited institution., • Demonstrated experience with systems engineering concepts and processes, • The ability to mentor others within the systems engineering discipline, • Experience with military and civil qualification standards, including hardware and software qualification., • Demonstrated ability to process, analyze, and present test results and adherence to technical requirements., • Speaking/ Presentation/ Dialogue Skills white board, small and large group presentations; high degree of comfort speaking senior military and staff personnel; ability to communicate effectively with both technical and non-technical individuals; intuitive ability to pivot from presentation to dialogue as appropriate, • Demonstrable Strong customer focus, ownership, urgency and drive, • Demonstrated ability to adapt to new technologies and learn quickly, • Self-motivated, and ability to self-prioritize effectively to achieve goals, comfortable with ambiguity, • High level of skill communicating effectively across internal and external organizations, both verbally and in writing, • Ability to travel as needed (up to 10%), • Secret level security clearance is preferred, • Proficient in Positioning, Navigation and Timing, GNSS simulation technologies or adjacent technical industries is preferred About Safran Federal Systems Safran Federal Systems has been awarded as aWinner of the USA Today and Rochester Metro Area Top Workplaces 2025 Award. In 2022, Safran acquired Orolia, now Safran Trusted 4D, the world leader in Resilient PNT. At the intersection of critical infrastructure and national defense, Safran Trusted 4D solutions govern and protect the integrity of systems that shape the world. In early 2019, Orolia Defense & Security spun off as a separate entity from its parent company Orolia, with the mission of providing resilient Positioning, Navigation and Timing (PNT) solutions and custom engineering services to U.S. Government agencies, U.S. Defense organizations, and their contractors. In August of 2019, Orolia Defense & Security acquired Talen-X, a U.S. company specializing in advanced GNSS (Global Navigation Satellite System) Simulation solutions and Interference, Detection, and Mitigation (IDM) technologies. Talen-X's portfolio was an ideal fit and has helped to enhance Safran FS's overall offerings. The acquisition enabled Talen-X's existing resources, operations, and capabilities to be scaled and accelerated to better support the warfighter. Read the press releasehere. Safran Federal Systems operates as a proxy-regulated company, Free of Foreign Ownership, Control, or Influence (FOCI). As such, Safran FS Defense & Security is approved to work on the full spectrum of U.S. Government classified and unclassified projects and is positioned to support strategic partnerships in the development of key PNT technologies for the defense market. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Please note this description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description Title Operator Inspector - Weekend Shift Department Coating Reports to Coating Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join to RPO team! Job Summary: The successful candidate for this position will be proficient at material handling of small optical components, hand-cleaning and loading them into coating-dedicated tools or fixtures. Ability to inspect for cosmetic defects is another important attribute of this position. You Will: • Support Technicians in cleaning and/or loading various sizes of optical lenses into custom fixtures in preparation for coating., • Support Technicians in quickly and safely unloading finished lenses, traying and packaging for inspection or shipment., • Inspect lenses when required per RPO’s cosmetic quality standards and customer specifications., • Support Sonic room operator by preparing lenses and other optical components for Sonic cleaning or parts washing as well as assisting in tray cleaning., • Support peers in general housekeeping practices, cleanliness, organization, and safety., • Take daily direction from the Manufacturing Manager and Sr. Manufacturing engineer of Coating, • Work with fellow employees to notify them of quality issues and address them, • Record labor and production output accurately into the RPO MES system, Epicor, • Maintain a neat and safe work environment, • Load or “flip” coating chambers after the coating run is complete., • Ability to communicate effectively to team members and management., • High school diploma or GED, • Ability to apply basic mathematical concepts., • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • Growth: The opportunity to learn and advance your career, internal training and advancement opportunities, Tuition Reimbursement Program., • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match, company contributions to medical savings plans., • Wellness: Health, Dental, Vision Insurance. Company provided Life Insurance and Disability Insurance., • Balance: 11 paid holidays, generous paid vacation and sick time, • While performing the duties of this job, the employee is regularly required to stand: use hands to fingers, handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch: and talk and hear., • The job may involve prolong periods of sitting/standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain)., • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally works in a clean environment and works to maintain the environment as such., • Safety Glasses are required and May require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles, • May work at different workstations as production needs require, or shifts from one station to another, during the production process. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Weekend Shift Schedule: Friday - Sunday, 5:00am - 5:30pm. Pay differential for Weekend shift schedule

Job DescriptionJob Overview: We are seeking a highly motivated and skilled Senior Quality Engineer who will lead and facilitate the implementation of quality initiatives and their continual improvement. Responsibilities include lead, coach, and facilitate problem solving, analysis of data and continual improvement activities. Review and understand customer prints and specifications. Ensure the quality of the parts produced meets all expectations. Quickly and effectively take action when external or internal non-conformances are found. Key Responsibilities: • Follows all safety processes and procedures in accordance with the job and Company policy., • Be the Quality liaison between the customer and site manufacturing process for understanding quality requirements and working through quality issues., • Facilitate and promote use of appropriate problem-solving techniques (8D, 5-Why) for effective root cause analysis and successful corrective action. Interfaces with engineering and manufacturing to ascertain and implement corrective actions., • Provide technical support to operations ensuring consistent adherence to quality requirements., • Determine when process stability and capability studies should be performed on existing processes. Review and analyze results. Recommend changes to processes based upon findings and perform follow up to verify effectiveness., • Participate in the Advanced Product Quality Planning activities (NORP) to determine appropriate use of existing and new measurement systems during new tool or process design and startup., • Participate in the PT lot process to ensure that all quality checks as outlined in the MPCD (operation work instructions) are in place and will ensure that customer requirements will be achieved., • Coordinate, develop, and submit PPAP documents (including Control Plan, FMEA, Process Flow Diagram) for new product launches to meet customer requirements., • Generate efforts to achieve and surpass the companys quality key metrics through the execution of QMS processes and by proposing new or modified approaches., • Understand and promote overall compliance with ISO 9001 specifications., • Manage priorities for inspection workload and support inspectors with the means to complete inspection tasks., • Interpret and explain GD&T callouts on customer prints for inspectors to follow., • Maintain performance evaluations of associates with evidence of their embodiment of the companys core values and data on their achievement towards S.M.A.R.T. goals., • Demonstrate a productive work ethic and commitment to quality that sets the standard for the Quality Engineer role., • Assist with other duties as assigned by Manager. Supervisory Responsibilities:, • Bachelors degree (B.A.) in engineering or technical field or equivalent combination of education and experience., • 7+ years related experience or training 2+ years experience with supervising., • To perform this job successfully, an individual should have knowledge of Microsoft Outlook, Microsoft Word, Microsoft Excel, and Microsoft PowerPoint.Other Requirements:, • Knowledge and experience in metal fabrication, stamping and forming. Ability to use standard manufacturing measurement tools and equipment. SPC, GD&T, DOE, Gage R&R, statistical analysis. Basic understanding of mechanical processes, materials and machinery. Strong problem solving skills. Ability to travel (15%) to customers and suppliers. ASQ certification a plus. PC-DMIS experience a plus., • Language Skills: Very High Skills: Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to effectively present information to top management, public groups, and/or boards of directors., • Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the employee is regularly required to stand; walk; sit; maneuver through the office and factory and lift and/or move up to 50 pounds. Hours:, • Full Time - 40 hours per week, • Monday - FridayBenefits:, • Competitive salary and benefits package., • Opportunity to work in a dynamic and innovative environment., • Professional growth and development opportunities., • Collaborative and supportive work culture.Contact Us:

Job Description M/E Engineering is interviewing for a Senior Mechanical Engineer in our Rochester, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Possesses a professional attitude showing interest in M/E's reputation and growth., • A fully competent engineer in all conventional aspects of the area of their assignment., • Plans and conducts work requiring judgment in independent evaluation, selection, adoption, and modifications of standard techniques and procedures., • Works with the Principal, Associate, or Project Manager to finalize project scope and schedule of deliverables and understands priorities identified., • Applies advanced practices and techniques, adjusts and correlates data, recognizes discrepancies, and follows projects through program, schematic, design development, construction document, bidding, and construction phases., • Supervises, coordinates, and reviews work., • Schedules and assigns work to meet completion dates., • Develop reports, studies, and system analysis., • Works in an efficient and effective manner and makes good decisions., • Evaluates application of substitute equipment., • Reviews final adjustment of equipment and systems after installation., • Writes or contacts clients directly except in controversial matters., • Ability to represent the firm at meetings and cover all trades, which may require further follow through., • Is assisted on projects by other engineers and/or designers., • Estimates workforce needs, schedules, and assigns work to meet completion date and updates the project manager as to status and resources available., • Mentors and trains younger engineers and designers., • Preferably has a Professional Engineering License (P.E.) or Engineer-in-Training (E.I.T.) working toward P.E. Licensing., • Bachelor of Science or equivalent. Powered by JazzHR k9iVS0Qu9x

Job Description Energy Engineer - Energy Efficiency, Built Environment Energy Infrastructure Partners LLC. Rochester, NY office (hybrid), no paid relocation. Travel required: 20-30% Anticipated start: June/July 2025 Note: EIP does not sponsor visa candidates. ABOUT EIP Energy Infrastructure Partners LLC (EIP) is a minority-owned business (MBE) specializing in energy efficiency, decarbonization, and demand-side management programs (DSM). With offices in New York, Illinois, California, Oregon, and Washington, EIP provides national reach while delivering local impact. Our work fosters sustainable energy solutions, supports economic development, and emphasizes benefits for disadvantaged communities. As a leader in clean energy programs, we are proud of our role in advancing environmental and economic goals through innovative and impactful projects. Position Description Energy Infrastructure Partners (EIP) is seeking motivated Energy Engineers to join our growing engineering team. As an Energy Engineer, you will support senior staff in delivering energy-related services across public sector, commercial, and industrial facilities. Your responsibilities will include assisting with energy assessments, supporting clean energy and decarbonization planning, and contributing to master plans focused on reducing emissions and improving building performance. This role provides an excellent opportunity to gain hands-on experience in the built environment while working on innovative solutions that support energy efficiency, sustainability, and the transition to a clean energy future. Objectives of this Role • Collaborate with senior engineers and the engineering team in executing energy efficiency projects and initiatives., • Conduct facility energy assessments, gather data, and assist in analyzing energy consumption patterns., • Perform simulations and modeling to develop project requirements and support business cases., • Work closely with customers to identify energy efficiency solutions and contribute to the development of tailored strategies., • Perform engineering calculations and testing activities to optimize system functionality and enhance efficiency., • Support the preparation of technical documentation, presentations, and progress tracking., • Stay informed about industry trends, emerging technologies, and best practices in energy efficiency and sustainability., • Contribute to the development of reports and presentations for internal and external stakeholders. Daily and Monthly Responsibilities • Perform energy calculations and utility analysis to support identification of energy conservation measures (ECMs), • Review RCx and audit reports, verifying the accuracy of engineering assumptions, savings estimates, and measure recommendations, • Support retro-commissioning and tune-up efforts by reviewing trend data, sequence of operations, and BAS screenshots, • Assist in developing scopes of work for energy efficiency projects and conducting site walk-throughs with service providers, • Collaborate with program managers and senior engineers to ensure quality and consistency across technical deliverables, • Track project milestones, review documentation for completeness, and follow up on action items from technical reviews, • Support data visualization, dashboard updates, and report preparation using Excel, PowerPoint, and project tracking tools, • Contribute to internal knowledge sharing and process improvement initiatives to enhance engineering workflows Required Qualifications • Bachelor's degree or higher in engineering from an ABET-accredited institution, with a focus on energy or related field (Mechanical Engineering, Electrical Engineering, Chemical Engineering, or similar), • 2+ years of relevant engineering and energy efficiency project experience, • Knowledge of energy efficiency principles and familiarity with building systems, HVAC, MEP, industrial manufacturing, Demand Side Management (DSM), RCx., • Proficiency in energy and regression modeling, or willingness to learn and apply these skills., • Strong analytical and problem-solving skills, • Demonstrated ability to work collaboratively in a team environment and a passion for sustainability and innovation Preferred Qualifications • Professional Engineer (PE, EIT, FE), Certified Energy Manager (CEM, EMIT), Project Management (PMP), LEED, ASHRAE, Building Performance (BPI), DOE/University - Industrial Assessment Center (IAC), • Familiarity with utility and governmental energy programs, • Experience with Commercial, Industrial, Public Sector, Multifamily Residential buildings, • Experience in: Strategic Energy Management (SEM), Retro-Commissioning (RCx), Lighting Systems, QA/QC, Measurement and Verification (M&V), ASHRAE Level 1 and 2 Energy Audits, and Greenhouse Gas Emissions (GHG), Electric Vehicles (EV), • Energy modeling and data analysis: IESVE, EnergyPlus, eQuest, OpenStudio, • Desire to learn and grow professionally in the energy industry WE OFFER • A dynamic and inclusive work environment that encourages collaboration and professional growth, • Exposure to cutting-edge projects and technologies in the energy sector, • $70,000 to $90,000 annual salary commensurate with experience and qualifications, • Performance bonus dependent on company and personal performance, • Professional development training, • Paid vacation and sick time, • Comprehensive health, life, dental, vision, and disability insurance options, • Employee assistance program for well-being support, • 401k retirement savings plan with employer matching Join us! Join Energy Infrastructure Partners (EIP) as an Energy Efficiency Engineer and be part of a passionate and diverse team dedicated to revolutionizing the energy industry. With a focus on resource efficiency, renewable energy, and environmental justice, you will play a crucial role in driving innovation and creating cutting-edge solutions for a brighter and more sustainable future. As we prioritize understanding our customers' needs and goals, your expertise will shape our approach to energy efficiency projects, facility energy assessments, and strategic energy management services. Together, let's build a sustainable world that benefits everyone – apply today and contribute to shaping a better future with EIP. Energy Infrastructure Partners LLC is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Search and apply for open positions on our company website career center.

Job DescriptionDescription: Weco is a value-added single-source contract manufacturer of machined components, finished fabricated sheet metal, and assembled metal products. Our three facilities encompass all aspects of metal product manufacturing including our own on-site finishing with powder, paint, and graphics capability. We serve the OEM Industrial, Healthcare/Medical Device, Aerospace/Defense, Renewable Energy, and Electronics by manufacturing both conventional and the most technically demanding items. We have been doing just that for companies from Fortune 500 to small and midsize firms since 1952. Benefits: • Competitive salary and benefits package, • Generous sign on bonus., • Opportunity to work with a team of talented professionals, • Challenging and rewarding work environment, • Generous Paid Time Off, • Several health insurance plan options with a generous employer contribution to the premium, • Long term disability fully paid for by the company, • Enhanced short term disability fully paid for by the company, • Life insurance fully paid for by the company, • Employee Assistance program, • Dental and vision insurance, • 401k plan with company match, • HRA and HSA options for pre-tax savings with an employer funded HRA benefit, • Pet insurance enrollment option Position Summary The Project Manager position will be responsible for management of high profile and complex projects from start to finish. This role will also work with employees on the shop floor to improve efficiency, safety, and quality of manufacturing processes. Duties and Responsibilities · Responsible for driving total project management solutions from quote through to shipment · Plans and designs tools, fixturing, and other mechanically functioning equipment · Develops plans and implements new machining processes. · Spearheads process optimization in both engineering and manufacturing. (automation) · Provide technical support to sales team and support customer interface accordingly · Complete detailed cost models needed to support providing quotes to customers · Comprehends and disseminates customer driven specifications called out on drawings and determine how to process the parts in accordance with the specifications required. · Works with QC to ensure all QMS requirements are being met during job routing. · Understands ISO 9001 workflow requirements and follow such procedures. · Builds B.O.M. on job routers to conform with customer material requirements called out on the print, parts list, and or contract. · Reviews customer supplied purchase orders and contracts to ensure we meet all order requirements and build notations in the work instructions. · Orders specialty material, hardware, and finishing supplies pertaining to the job or project assigned. · Works with QC to review material certifications from vendors and sign off that they meet the called-out requirements from the contract. · Effectively communicates any issues encountered while working on assigned projects back to supervisor and the customer as needed in a professional and timely manner. · Leads post and pre-production reviews on defense projects during first run or after encountering issues. · Creates measurable KPI’s that will quantify success on critical to plant growth projects. · Provides support as Engineering Manager back up. · Interprets customer supplied drawings and determine the best method of manufacturing considering the equipment available and the current manufacturing schedule. · Writes work instructions in detail pertaining to any one of the fabrication processes. · Utilizes 3D CAD software to help shop floor employees better understand the manufacturing process of various parts. · 3D model customer parts using their supplied drawings utilizing CAD software. · Program machines. (laser, turret) · Supports the shop floor in any fixture design / work holding suggestions and optimize quality outcome. · Utilizes Mastercam, SolidWorks, Radan, Epicor, or similar software when required, to communicate effectively to the shop floor. · Maintains revision control of manufactured parts using our ERP system. · Other duties as assigned. Requirements: Position Qualifications · Bachelors degree in Engineering or related discipline is a plus · 10 plus years of experience in hands on machining (mills and lathes) · 3+ years of experience in Project Management. Knowledge, Skills, and Abilities · Strong communication skills, both written and verbal · Excellent problem-solving skills · Attention to detail and accuracy. · Proficient in Microsoft Office. · Ability to work independently and as part of a team. · Flexibility and adaptability to changing priorities and deadlines. · Confident decision-making ability · Capable of participating in cross-functional settings and working with support functions, manufacturing, quality engineer, and facilities. · Support cost reduction & continual improvement activities. · Analyze raw data and generate usable reports. · Knowledge of print reading and understanding of common GD&T practices. · Knowledge of materials and their chemical and physical properties.

Job Description Title Optical Coating Engineer Department Coating Reports to Coating Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in the Rochester area, RPO offers exciting career paths to work on market-leading programs across a variety of industries. Job Summary: The coating engineer will be responsible for supporting the vacuum thin film coating manufacturing of both catalog and specialty optical components and includes interacting with other engineers and manufacturing staff. This is an excellent opportunity for an energetic, forward-thinking individual to work in a fun, fast-paced environment. You Will: • Support the manufacturing of PVD thin film coatings., • Assist R&D programs by transferring coating design concepts to manufacturing., • Provide technical support to Operations on proper substrate handling, cleaning techniques, coating materials, coating designs and continuous improvement of manufacturing methods, • Assist manufacturing staff in the operation and utilization of metrology instruments for thin film characterization, • Identifying and diagnosing issues on the production floor, as well as collecting and preparing supporting data, especially with regards to coating equipment and processes, • Design optical coatings to meet customer and internal specifications, • Develop new optical coatings for all global manufacturing sites, • Stay up to date with coating technology capabilities and limitations, • Propose investment in new coating technologies, by defining specification needed to enable new coating designs, • Guide coating designers around the globe to raise the know-how in the organization, • Collaborate with R&D and manufacturing to ensure successful implementation of coating designs, • Train new coating designers on advanced coating topics, • Develop IP around coating design and technology to strengthen EO’s market position, • Serve as the subject matter expert on projects when needed, • Interface directly with select customers on relevant projects, • Provide management with technical tradeoffs and risks pertaining to project work as well as general engineering efforts such that management may make informed decisions., • Creates & develops coating designs for new products, • Improves coating designs and processes for manufacturability, performance, and cost, • Leads root cause analysis / corrective action activities for coating related processes, • Serves as a subject matter expert for thin film coating processes, • Supports/collaborates with Optical Design Engineers and Sales Department, • Interact with customers in development of new products, • Leads the transfer of optical coating processes and technology from development to production, • Stay well-versed in coating equipment, pumps, evaporation sources, ion sources, crystal monitors, and PVD basics, • Train technicians on the execution of optical coating processes, • Monitor and drive continuous improvement of manufacturing processes, • Identify and solve quality issues, • Create or change processes to improve quality, • Support troubleshooting of existing optical coating equipment and processes, • Perform other duties as assigned You Have: • Bachelor of Science in Optical, Electrical, or Mechanical Engineering, or alternatively a Bachelor of Science in Physics., • 5+ years of optical thin film coating experience in a manufacturing environment., • Extensive experience (5 years minimum) in Thin Film coating design using PVD, IAD, E-Beam, PECVD and optical chamber systems., • Proficiency in optical thin film deposition, optical monitoring, high vacuum technology, optical measurements, process controls and management., • Familiarity with most optical coating materials and their domain of application., • Familiar with optical testing such as spectrophotometry, stress measurements, environmental testing and laser damage., • Excellent computer skills – Email, MS Word, MS Excel, ERP system, • Experience reading and interpreting technical drawings and engineering specs You Are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team. Environment & Physical Demands: • Professional office environment with routine use of standard office equipment such as computers, phones, copiers, filing cabinets and fax machine; noise level typical of a standard office environment, • Prolonged sitting, computer and telephone use, as well as standing, filing, bending, reaching and lifting and carrying up to 15 pounds, • Occasional exposure to manufacturing plant floor requiring the use of personal protective equipment (ear plugs, safety glasses, etc.) This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire.

Job Description As a Solar Engineer, you are responsible for providing ongoing field services support to multiple solar, battery storage (BESS) or other renewable energy systems on a continual/on-demand basis in order to optimize equipment performance, troubleshoot/resolve equipment issues, support emergency repairs and other provide ongoing O&M compliance support. In this role you will assist with all routine site inspections, maintenance projects, equipment & system testing, and other project compliance, troubleshoot or restoration matters. Solar Engineers regularly participate in field support, training and project safety orientations/classes in order to develop skills and technical expertise in one or multiple disciplines including PV array, inverter, medium voltage, BESS and other solar services. Leads and Managers will provide regular coaching and training and will qualify engineers for field operations. Solar Engineers may be responsible for such things as reviewing and assessing solar construction documentation; tracking and monitoring project documentation; evaluating construction and operational issues; meeting with other engineers, site hosts, developers, and investor/owners to present and review project operations, compliance and maintenance/repair matters; participating in industry forums; and possibly even dealing with clients directly. One general requirement for most solar engineering positions is a working knowledge of mechanical and electrical systems, and an understanding of a range of engineering concepts (such as site operations, assessment, analysis, and design, and energy optimization). Essential Job Functions & Responsibilities: Diagnose and repair systems failures as existing solar sites, identify and correct potential issues that may impact site performance in the future. Assist and support field teams with real-time solutions to site operations issues and execute the same. Diagnose/troubleshoot equipment failures and perform regular preventative maintenance on a variety of solar, BESS and other project equipment. Support field teams and clients via oversight/support of warranty matters regarding equipment and systems for use or replacement. Installs, removes, troubleshoots and the maintenance of solar, BESS and other related electrical equipment. Management and support of large scale commercial & Industrial (C&I) PV systems and battery storage systems (BESS) including all preventative maintenance, troubleshooting, repairs and operations; Frequent project site visits as well as remote troubleshooting/analysis via smart software platforms. PV site analysis, asset management, technical drawings/construction assessments, project management and system optimization. Ensure a safe, event-free work environment through strict adherence to company and client protocols, safety procedures and regulations. Ensure compliance with all safety requirements and safe best practices (e.g. lock-out/tag-out compliance, JHA completion, LDL testing, and compliance with all company safety policies or procedures and work practices). Prepare service tickets and reports for site visits, emergency repairs, equipment modifications and equipment improvement investigations. Provide reports, written and oral communication in a timely and complete fashion. Communicate with technical leads, project leads/managers, and third-party sub-contractors to ensure timely resolution to all required activities; Support recommended performance improvements and at address site safety and compliance concerns; Other responsibilities as directed by manager. Knowledge: Knowledge of National Electrical Code and standard design/construction practices; Understanding of OSHA safe workplace practices and procedures; Ability to read and understand electrical drawings; Electric and related utilities and utility maintenance Solar energy installation, maintenance and optimization Skills In addition to the specific work experience and skills, QE Solar also seeks someone with the qualities listed below: • Exceptional work ethic, with strong values and principles, • Able to supervise and coach others in a matrix work environment, • Willingness to work irregular schedules to meet client/project deadlines, • Exceptionally strong communication skills, both written and verbal, interpersonal, and teamwork skills, • A firm commitment to client, team, and organization success, • Flexible and accommodating and able to go above and beyond the basic expectations when required, • High follow-up and organizational skills, • Detailed-oriented, with attention to detail for tasks that have zero tolerance for errors, • Curiosity, • Candor and transparency Physical Requirements: Ability to lift 25/50/80 pounds regularly Ability to move safely over uneven terrain Ability to stand, sit or drive for prolonged periods Ability to safely climb ladders while carrying 50 pounds See also, Physical Demands Task Sheet. Working Conditions Primarily outdoors; Ability to work in extreme weather When working at home, desk conditions. Required Education: Bachelor’s Degree in Electrical Engineering. Required Experience: 0-3+ years of service industry project management experience, or, 0-2+ years of specialist, technical experience with solar projects, BESS, or other renewable systems; Experience with data acquisition systems; veterans or military experienced candidates are strongly encouraged to apply; Preferred Experience: 0-2+ years technical experience as a field technician; Experience working with 600v-1500v systems; Strong knowledge of NEC, IEEE and current NFPA-70e requirements; Proficient with technology and computing programs/platforms; C&I/Utility Scale solar work experience; Experience with operations of solar sites and/or project maintenance and compliance. Required Certifications, Licensures, Etc. Current, Valid, Active Driver’s License and QE Approved Insurance Coverage; Personal Work Vehicle. Preferred Certifications, Licensures, Etc. Inverter and/or BESS manufacturers’ certifications (e.g SunGrow, Power Electronics, Solectria, BYD, etc) a plus Thermography certifications (Level 1) IT/networking skills: Familiarity with RS485, Modbus, tcp/ip, etc. NABCEP PV Installer Certification Minimum OSHA 10/30 Certification Completion of NFPA 70E courses CPR/First Aid Required Other Clean Background Check and Motor Vehicle Report Workplace Type: On-site Salary Range: $30.00 - $40.00 per hour Employment Type: Full-time Location: Rochester, NY United States Statement to all Third-Party Agencies and Similar Organizations: QE Solar accepts resumes only from contracted recruiting agencies with formal service agreements. Please do not send unsolicited resumes or outreach emails to our QE Solar employees, hiring managers, or team members without expressed consent or contract for services. QE Solar is not responsible for any fees or charges associated with unsolicited resumes or services.

Job Description Job Overview: As a Data Engineer, you will be an integral member of the Business and Data Insights department, responsible for designing, building, and maintaining robust data infrastructure. You will work with a variety of data sources and systems, support the development of our enterprise data warehouse, and enable advanced analytics through scalable data solutions. Your work will directly support operational efficiency, performance monitoring, and strategic initiatives across the organization. This is a hybrid position working out of Rochester, NY. Please note, RTS does not cover any relocating expenses. REPORTS TO: Director of Business & Data Insights COMPENSATION:$80,000-$90,000 annually (depending on experience) BENEFITS INCLUDE: • Staying Healthy: Medical, Dental,and Vision (Dental & Vision currently free), Flexible Spending Account (FSA), • Feeling Secure: Disability Insurance, Pension Plan, NY State Deferred Compensation Plan, Life & Accidental Death & Dismemberment (AD&D) Insurance, Accident Insurance, Group Specified Disease Insurance and Hospital Insurance Key Responsibilities: • Leverage data to develop solutions that address complex business challenges., • Design, develop, and maintain scalable data pipelines and architecture to support enterprise analytics and reporting needs., • Interface with various databases and data sources, understand schema and data flows, and ensure efficient data integration., • Lead the development, maintenance, and enhancement of the enterprise data warehouse (EDW)., • Collaborate with cross-functional teams to establish data validation processes that ensure data is accurate, consistent, and reliable across all sources., • Execute complex ETL tasks involving extraction, transformation, and loading of data from multiple sources, supporting both batch and incremental methods., • Design and build datasets to support data mining and advanced analytical initiatives., • Responsible for the deployment and automation of data processes and data mining algorithms., • Ability to stay current with emerging technologies, conduct evaluations, and recommend tools or platforms that align with organizational goals., • Ensure data practices align with company policies and comply with relevant data protection regulations, promoting security and privacy best practices., • Other duties as assigned. Education and Experience: • Bachelor's degree in computer science, Information Systems, Engineering, or a related field (Master's degree preferred)., • Minimum of 2 years of experience in data engineering, with a proven track record in building data architectures, ETL pipelines, and working with data warehouses. Knowledge, Skills and Abilities: • Strong analytical and problem-solving skills, effective communication skills, and the ability to work collaboratively in a team-oriented environment., • Proficiency in SQL, Python and PowerBI, • Hands-on experience with relational databases like MS SQL Server, cloud platforms (e.g., AWS, Azure)., • Experience with dimensional modeling and Kimball's methodology for building enterprise data warehouses is a plus., • Familiarity with data warehousing solutions like Snowflake, Redshift, or Big Query is a plus., • Experience with data pipeline tools such as SSIS or similar ETL frameworks., • Familiarity with data governance, data quality, and data cataloging practices., • Strong knowledge of data modeling and data architecture best practices., • Transit industry experience is a plus. PHYSICAL DEMANDS & WORK ENVIRONMENT: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit while using hands to finger, handle, or feel objects, tools, or controls. The employee frequently is required to walk, talk, hear, see, and use a computer. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. The employee is occasionally required to stand, reach with hands and arms, and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 20 pounds. The noise level in the work environment is usually moderate. The employee may occasionally be required to travel commercially. This position is eligible to participate in a hybrid work model. Hybrid work is a flexible working model where employees work partly in the office and partly remote from an approved location. All employees must adhere to the Company Telecommuting Policy & Agreement if they choose to participate in the hybrid work model. Please note that RTSdoes not provide sponsorship for employment visas at this time; candidates must be authorized to work in the United States without sponsorship. RTS does not cover moving or relocating expenses. ADDITIONAL INFORMATION: Rochester Genesee Regional Transportation Authority (RGRTA) is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship and/or immigration status, sex, sexual orientation, gender identity, pregnancy, age, veteran status, disability, genetic information, or any other protected characteristic under applicable federal or state law. RGRTAwill make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business.

Job DescriptionPower-Flo Technologies is a leading distributor of electrical equipment offering one of the most comprehensive product and service portfolios in the state, including automation, drives, controls, power distribution, and motor repair. We are looking for an experienced Applications Engineer to join our Upstate New York team. You will play a critical role in delivering complete, real-world systems and solutions to our customers. Applications Engineer Primary Functions • Pre and post sales support for automation, PLCs, drives, motion control, and machine vision products and services., • Assist customers with proof of concept for automation, PLCs, drives, motion control, and machine vision applications, • Assist sales and account managers as necessary to close business., • Phone and On-Site customer support., • Preparation and execution of product training classes including development of course and materials., • Attend vendor training classes as offered and/or required., • Maintenance, appearance and upgrades to Machine Vision demos., • Weekly engineering activity report and schedule., • Target and plan for minimum $20K annual engineering and training billings., • Minimum 2 customer calls per week, whether technical or sales., • Monitor and complete assigned Engineering Tasks, • BS Engineering or equivalent technical degree, • Knowledge of automation, PLCs, drives, motion control, and machine vision applications, • Advanced computer skills: Windows, VM Ware, Networking, • Knowledge of Siemens programming and HMI software a plus, • Ability to operate a motor vehicle We are an equal opportunity employer offering competitive compensation and benefits package including health, disability, life insurance, 401(k) and long-term disability plans. Salary Range $75,000 - $125,000 annually About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description We are currently looking for a Substation Physical Engineer from 0 to 5 years of experience. Duties • Assist with create/modify detailed design for Substation:, • Control building (relay panels, facilities, cable raceways, trays, etc.), • Busbar and strain bus, • Equipment & support structures, • Assembly drawings, • Cables and connectors, • Lightning protection and lighting, • Grounding grid, • Conduit and tranches, • Perform basic calculations such as:, • Grounding, • Lighting and lightning, • Cable ampacity, • Tray sizing, • Trench sizing, • Conduit sizing, • Assist project manager to develop scope of work and conceptual design for the projects;, • Communicate and coordinate project activities with project manager, client, and others as needed;, • A Bachelor’s Degree in Electrical Engineering, Mechanical or Civil is preferred., • 0 to 5 years of experience in Substation Physical design., • Willing to pursue PE license in NY and NC., • Desired knowledge of Institute of Electrical and Electronic Engineers (IEEE), NERC, NEC, NESC, NEMA, and ANSI standards used in designing substation is critical., • Periodic travel, ability to visit project sites. Salary Range: $60,000 - $86,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description LaBella Associates is currently seeking an Electrical Engineer in our Rochester, NY office. Duties • Preparation of electrical design drawings, specifications, and reports, • Responsible for project construction (submittal review, construction observation, and punch lists), • Interact closely with mechanical, civil, structural engineers and project architects, • Prepare electrical design drawings using Revit and AutoCAD., • Perform lighting calculations and arc flash studies., • Perform field investigations to document existing conditions. Requirements • Building system design experience focused on power distribution, lighting, fire alarm, security systems & telecommunication, • Proficiency in Revit, AutoCAD, MS Excel and Word, • Familiarity with electrical modeling programs – Lighting software AGi32, Power software SKM, • Familiarity with Arc-Flash Evaluation, • Bachelor’s degree in electrical engineering, • Minimum 5 years engineering experience involving building systems projects, • Strong writing, organizational and communications skills, • Ability to work on several projects simultaneously, • On path towards New York PE license preferred, not required Salary Range: $75,000 - $105,000 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description We are in search of a capable candidate to play a key role in a broad spectrum of projects, encompassing everything from large utility infrastructure projects and athletic fields to land development work and higher education facilities. This dynamic position involves direct engagement with clients in the public sector, offering the candidate a valuable opportunity to interact directly with them. The role requires versatility, as the candidate will contribute to projects with diverse scopes, showcasing their ability to navigate challenges across various disciplines. Duties • Plan and design large scale infrastructure, land development and athletic field projects., • Oversee and guide projects from initial concept through construction closeout., • Mentor and lead project team and direct reports, • Perform and review detailed hydraulic calculations., • Produce effective and high-quality project documents (including reports, drawings, and specifications), • Provide bidding and construction administration services., • Assist in the preparation of project proposals., • Communicate directly with and maintain client relationships. Salary Range: $65,000 - $90,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • Bachelor’s Degree in Civil and/or Environmental Engineering, • 5+- years’ experience, • Registered as a Professional Engineer or ability to obtain license within 1-yr, • Track record of developing good working relationships with municipal, industrial, and/or institutional clients, • Effective communication skills using oral, graphic and written forms, • Ability to perform assigned tasks with minimal supervision, • Ability to travel to project sites and work remotely as needed, • Ability to manage workload and budgets as allocated Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description LaBella is currently looking to hire an Environmental Engineer with air permitting experience in our growing, multi-disciplinary, Environmental Division. LaBella has over 1,800 employees in over 30 offices throughout 13 states. This is an opportunity for a smart and talented professional with enormous upside potential as part of a growing company. We are seeking a highly motivated individual with an entrepreneurial spirit to join a dynamic team working on exciting, multi-phase, technically engaging, and impactful projects. The successful candidate will be responsible for managing air permitting and air compliance projects for industrial, municipal and state agencies. The successful candidate will have a working knowledge of NYSDEC air regulations, air dispersion modeling and emission calculations (potential-to-emit and actual). The successful candidate will assist project managers with developing proposals with scope of work and cost for client review and conduct necessary site visits/field inspections for new air permits/registrations and assessing compliance with existing permits. LaBella offers excellent training and career advancement opportunities and outstanding benefits. Duties • Experience with Title V air permits, state facility permits and air registrations, • Familiarity with NYSDEC air regs and Fed NSPS and NESHAP, • Knowledge of regulations concerning criteria, non-criteria, HTAC, HAPs and their respective state/fed thresholds, • Familiarity with NYCRR Parts 621 & 617, • Familiarity with NYCRR Part 212 analysis (including DAR-1/SGC & AGC & DAR-10/modeling guidelines), • Familiarity with surface coating (e.g., paint booths and NYCRR Part 228), • Some familiarity with air dispersion modeling (e.g., AERSCREEN, AERMOD), • Familiarity with PTE and actual emissions calc (using AP-42 EFs, Engineering calculations, mass balances, etc.), • Methos 9 certified (for plume/opacity observation), a plus!, • Familiarity with EPA Reference Methods for air pollutant measurements (40CFR60 Appendix A) & NIOSH Methods for indoors and personnel testing/measurements, • B.S. degree in Engineering (Chemical or Environmental), • NY State Licensed Professional Engineer, • 7-15 years of experience in a related local environmental position, • Ability to work independently and as part of a team, • Ability to work in a fast-paced environmental consulting team environment., • Ability to work within a multi-disciplined group of professionals., • Strong communication skills (active listening, written, and verbal), • Organized with strong attention to detail, • Highly motivated, with excellent client service skills and a positive attitude, • Strong problem-solving skills, • Valid NYS driver’s license, lean driving record, and reliable transportation Salary Range: $75,000 - $100,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job DescriptionDescription: Position Summary: The Process Engineer will design and implement systems and equipment procedures using manufacturing facilities. This entry-level position is ideal for recent graduates or early-career professionals looking to apply their technical background in a hands-on, fast-paced environment. You will play a key role in developing, optimizing, and maintaining laboratory and production processes, contributing directly to our innovation and quality goals This position will also support the functions of the R&D – Optical Department to meet the requirements of the relevant ISO 9001:2015 standards based on the quality objectives established by Top Management. Essential Duties and Responsibilities: • Assist in the design, development, and improvement of manufacturing and laboratory processes., • Conduct experiments and collect data to support process optimization., • Prepare detailed reports and presentations to communicate findings and recommendations., • Collaborate with cross-functional teams including R&D, Quality, and Production., • Maintain a clean, organized, and safe laboratory environment., • Operate and maintain lab equipment and instrumentation., • Meets required ISO 9001:2015 standards and necessary training based on the relevant Quality Objectives. Competencies: To perform this job successfully, an individual should demonstrate the following competencies: • Written Communication – Read and interpret written information effectively, write clearly and concisely, adapt writing style for different audiences., • Verbal Communication – Give focused attention to what others are saying, take time to understand what and respond when appropriate without interrupting, speak clearly and effectively express ideas and opinions, adapt and react professionally in both positive and negative situations., • Teamwork & Collaboration – Balance team and individual responsibilities, consider others’ views objectively and with openness to changing your own, give and encourage feedback, contribute to a positive team dynamic, prioritize team success over personal interests, work effectively across departments toward company goals., • Professionalism – Interact with others in a considerate manner, follow through on commitments, react well under pressure and preserve confidentiality, control emotions, and accept responsibility, maintain focus on solutions and treat others with respect and consideration regardless of their status or position., • Motivation & Initiative – Demonstrate persistence and ability to adapt to changes in daily workflow and overcome obstacles, ask for and offer help when needed, work independently when required, volunteer readily and look for ways to improve and create successful outcomes, positively contribute to overall work environment., • Bachelor’s Degree in Optics, Materials Science, Chemical Engineering, Chemistry, Physics or related field., • 1–5 years of relevant experience (internships or academic lab work welcome)., • Strong organizational skills and attention to detail., • Excellent written and verbal communication skills., • Proven ability to work independently and as part of a team., • Hands-on lab experience with process development or experimental setups., • Proficiency in data analysis and technical reporting. Preferred Qualifications: • Master’s Degree in Optics, Material Science, Chemical Engineering, Chemistry, Physics or related field., • Familiarity with statistical process control and root cause analysis., • Experience with lab safety protocols and documentation., • Understanding of manufacturing or scale-up processes. Supervisory Responsibilities: None. Travel: Negligible. Physical Demands: Frequently required to sit, speak, hear, see, and perform repetitive motion (data entry). Occasionally required to lift or carry (10 lb. minimum). Reasonable accommodations will be made available if applicable.

Job Description Job summary: To provide engineering and development support to ensure the most economical and feasible methods are utilized for each project. Responsible for collaborating with manufacturing, quality and engineering departments in developing appropriate quality and manufacturing practices and documentation to meet and exceed customer expectations. Essential Duties and Responsibilities: • Consults with Process Engineer and Chief Manufacturing Engineer regarding part quality requirements., • Assists with work instructions, quality plans and appropriate training documents for manufacturing and quality departments., • May consult with customer’s technical personnel regarding current and upcoming projects or concepts., • Assists with preparation of accurate cost analysis of projects and forecasts accurate delivery times for quotation process., • Able to make decisions on new production quotes and expansion of product lines for customers., • Consult with Chief Manufacturing Engineer to improve throughput, profit margins, and efficiency in manufacturing., • Works with manufacturing, quality, and engineering to reduce non-conforming material., • Provide engineering support and input to departments within company., • Assists manufacturing department in development of processes for production., • Authority to cease or allow production on parts that do not meet specs., • Performs product/process analysis for cost reduction, quality improvement, and improved efficiency, and makes recommendations., • May represent Manufacturing/Management Department on cross-function teams., • When requested, may work on special projects and various related assignments. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. Must be able to stand for long periods of time. The employee is occasionally required to reach with hands and arms. The employee is required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 25 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from moderate to loud. Education, Skills and Experience: • Bachelors’ of Engineering Degree from a four-year college or 5 years related experience and/or training; or equivalent combination of education and experience., • The Manufacturing Engineer is expected to know customer and company requirements by reading, interpreting and understanding the necessary specifications and procedures., • Excellent written and oral communication skills. Must have the ability to translate technical data into a format and language suitable for shop floor personnel., • Strong computer skills used to create elaborate work instructions (CAD, Microsoft Office), • Ability to provide feedback to drive behaviors of employees., • Able to deal with a variety of abstract and concrete variables.

Job Description Overview CTG's long-standing Fortune 500 client of over 15 years has a W2 contract assignment for a Quality Engineer II. Type: Contract Job Title: Quality Engineer II Location: Woodland, CA Candidates must be able to commute and work onsite in Woodland, CA Pay Rate: $44.43 to $58.24/hour Work Hours: M–F 8am–5pm Education: Bachelor’s degree in Science, Engineering, Bioengineering, or related field (Chemistry or Biology preferred) Description The Quality Engineer II will develop and support all Quality Management System (QMS) and Regulatory Affairs (RA) activities in alignment with site quality goals and metrics. This role is responsible for new product setup, quality project management, and ensuring regulatory compliance for serum products. The position will ensure compliance with in-house and external specifications and standards such as cGMPs, 21 CFR 820, ISO 13485, and Quality System Procedures. Requirements • Ensure compliance with new and changing regulations impacting products and processes, including QSR’s and global import/export regulations, • Manage new product setup and related projects, • Support supplier audits as needed, • Collaborate with USDA on regulatory compliance, including approvals, import/export compliance, traceability, quarantine, safety testing, and affidavits, • Serve as a resource for customer regulatory and technical inquiries, • Maintain ISO 13485-based quality system, • Implement and manage CAPA (Corrective and Preventive Actions) and problem resolution, • Lead quality documentation, nonconformance reports, inspection activities, and product disposition, • Review and revise procedures, specifications, and forms to maintain and improve the QMS, • Act as the Quality Help Desk and customer complaint contact for problem resolution, questionnaires, certificates, and surveys, • Perform internal audits in support of internal requirements, 21 CFR 820, and ISO 13485 compliance, • Represent the organization in customer quality audits, supplier quality audits, and regulatory inspections, • Conduct investigations and analyses to resolve quality issues, • Collaborate with cross-functional teams to support quality system implementation, • Create new product master files to meet customer and quality system requirements, • Ensure compliance with company policies and departmental procedures, including product performance verification, problem investigation, process improvements, and non-conformance prevention, • Provide training on quality systems and applicable regulations, • Track and trend QMS metrics, • Perform other duties as assigned Required Qualifications Education • Bachelor’s degree in Science, Engineering, Bioengineering, or related field (Chemistry or Biology preferred) Qualifications • Minimum 3 years’ experience in Quality or Regulatory, preferably in medical device, pharmaceutical, or biotechnology industries, • Strong knowledge and application of Quality Systems Regulations 21 CFR 820 and ISO 13485, • Ability to develop, update, and train on SOPs, • Experience performing internal/external audits, • Ability to monitor QMS activities, including Change Control, CAPA, Complaints, and Nonconforming Materials/Products, • Problem-solving skills for investigations and root cause analysis, • Experience with Continuous Improvement, Lean, or Six Sigma Desired Qualifications • SAP, EtQ, and/or PeopleSoft experience, • Statistical analysis experience, • Project management experience, • Knowledge of animal by-product import/export regulations, • Background in animal health, virology, immunology, or epidemiology Soft Skills • Strong organizational, time management, and attention to detail skills, • Excellent interpersonal and communication abilities, • Ability to work independently and influence others in a collaborative team environment Additional Information • No third party resumes will be accepted, • Drug testing and/or other employment-related inquiries may be conducted, • CTG will consider for employment-qualified applicants with criminal histories in a manner consistent with the requirements of all applicable local, state, and federal laws, • All interested individuals MUST be able to work on a W2 Tax basis (no C2C or third party vendors), • CTG is an Equal Employment Opportunity employer, • CTG is an E-Verify Company To be considered for this opportunity, please apply directly through our website by clicking the link below or email your Word version resume and salary expectations to . The expected base salary for this position ranges from $44.43 to $58.24/hour. Salary offers are based on relevant skills, training, experience, education, market factors, and applicable licensure or certifications. In addition to salary, a competitive benefits package is offered.

Job Description LaBella is currently seeking a Project Manager in Civil Engineering in our Land Development Group out of our Rochester, Syracuse, or Buffalo Offices. • Independently manage Land Development Civil Engineering projects from start to finish with a team of junior engineers. Includes overseeing the preparation of Civil Engineering Site Plans from conceptual design through construction documents. Includes preparation of Stormwater Pollution Prevention Plans., • Bachelors Degree in Civil Engineering., • 8+ years of experience with demonstrated success in a professional consulting environment., • Strong Land Development Design experience including preparation of Site/Grading/Utility Plans, Construction Details, and Conceptual Layout plans. Stormwater Design experience including preparation of Stormwater Pollution Prevention Plans. Experience obtaining agency approvals., • Experience in project management. Ability to effectively manage project budgets and workload by delegating to junior staff., • Strong written and verbal communication skills. Candidate should possess the ability to interact effectively with clients, project teams, colleagues, and outside agencies. Ability to collaborate efficiently with teammates in different disciplines and in different locations., • Strong critical thinking, problem solving, and attention to detail skills. Ability to make decisions by weighing different factors from multiple points of view., • Registration as a Professional Engineer (PE) is encouraged., • AutoCAD and HydroCAD experience is preferred., • Construction administration experience is preferred. Salary Range: $90,000.00 - $120,000.00 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Company Overview CME Associates, Inc. (CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering. Summary Responsible for field investigations, special inspections, material testing, project management, performance and engineering calculations, and authoring on-time reports. Responsibilities • Perform a variety of engineering functions under direction of Senior Professional Engineer, • Prepare engineering studies and reports, • Project coordination and project management of Special Inspection and Construction Materials Testing work, • Perform special inspections, various field inspections, and materials testing as needed (soils, concrete, masonry, steel), • Perform test boring/test pit observations, laboratory analysis, and preparation of geotechnical calculations and reports, • Supervise and support project team, as necessary, • Implement Quality Assurance, and assurance of field and laboratory adherence to technical standards and applicable codes, • Bachelor of Science in Civil Engineering, or related, • Engineer in Training (E.I.T.) certificate, • High degree of proficiency in Microsoft Office programs, including Word, Excel and Outlook, • Functional knowledge of industry practices and regulations, NY State Building Code, and engineering standards as needed to perform Quality Assurance requirements and engineering designs as required, • Possess ability to maintain effective working relationships with managers, co-workers and clients through clear communication and proactive progress reporting, • Possess excellent organizational skills are necessary to be able to manage multiple projects, each with schedules and budgets, • Familiarity with construction materials, procedures and documents a plus Benefits CME offers competitive wages and benefits such as: Health, Dental, Vision, 401K, Health Savings Account, Supplemental Insurance Products, and Paid Time Off (including Holiday, Vacation, Sick and Personal) for full time employees. This is an Equal Employment Opportunity. All qualified applicants will be afforded equal employment opportunity without regard to race, color, sex, age, marital status, sexual orientation, gender identity, religion, national origin, disability, status as a protected veteran, or any other characteristic protected by federal, state, and local laws. CME Associates, Inc. is an Affirmative Action Employer. A New York State Certified Woman Owned Business Enterprise (WBE). Powered by JazzHR u2d2ZIqask

Job Description K&A Engineering Consulting – is a privately held company, providing comprehensive consulting, engineering and design, program/project management, construction management, and support services to power utility and industrial clients. Specializing in substation, transmission, distribution, distributed energy resources, and EPC services, we excel in solving complex challenges with precision-driven solutions. We pride ourselves on employing top talent, fostering a culture of excellence, and building meaningful relationships with clients and employees. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Transmission Engineer to join our team at K&A Engineering in Rochester, New York. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • Conductor Selection, • Structure recommendations, • Insulation, A/C interference, static wire, grounding studies, • Line Design: Plans and Profiles, Cross section details, • LiDAR and aerial photo data, • Utilization of wetlands, vernal pool and sensitive resource data in line and structure design and placement, • Detailed estimate and probability modeling, • Other studies as required to complete the projects, • Lead overall transmission line design for all capital projects, • Review/Design transmission line plan and profile drawings using PLSCAD to ensure compliance with Avangrid TM standards and NESC/other standards, • Drive the project plan for transmission line routing and strategy, specifically:, • Decide whether to rebuild existing lines or obtain additional right of way based on area congestion and local politics/permitting issues, • Determine required structure designs based on design constraints, • Bachelor of Science in Electrical Engineering or related degree from an ABET accredited program., • 5+ years of electrical engineering experience within transmission lines, • Perform engineering responsibilities without assistance and minimal supervision, • Strong knowledge in standard engineering techniques and procedures Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with Company Match), • Lifestyle Spending Account (LSA), • Paid Parental Leave, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, Parking and Transit Reimbursement, and Pet Insurance, • Long-Term Disability, Short-Term Disability, and Life Insurance The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job Description Electrical Consultants, Inc. (ECI) is a leading power engineering consultant firm that provides engineering, system planning and studies, technical consultation, project management, surveying, environmental planning, commissioning/testing and construction services to electric utilities, energy developers and industrials throughout the U.S. Our experience includes system voltages from 4.16 kV through 765 kV. ECI has an immediate opening for a Protection Engineer. As a Protection Engineer, the successful candidate will provide power system protection services including system model development, short circuit analysis, relay settings development, area coordination studies, standards development, relay operation analysis, and technical reviews of drawings and relay settings. The successful candidate will also be in charge of mentoring less experienced engineers via direct training and technical review of work. Minimum Requirements: BSEE or equivalent degree; 5+ years protection engineering experience; SEL Relay Setting Experience; ASPEN OneLiner or PSSE CAPE experience; excellent verbal/written communication skills; strong organization and planning skills; ability to work in a team environment; commitment to quality and accuracy; and a willingness to meet fast-paced project schedules required. P.E. license preferred. The successful applicant may be subject to client-mandated drug and background checking. Occasional travel/driving is required; therefore, the successful applicant will be subject to ECI's auto insurance carrier requirements. Applicants must not require sponsorship for employment visa status (e.g., H-1B visa status) now or in the future. Salary commensurate with experience and education. Benefits include: • Medical, dental and vision insurance, • Flexible spending account, • Health savings account, • Life insurance, • Disability insurance, • 401(k), profit sharing and employee stock ownership plan, • Paid vacation, personal days and holidays, • Paid Parental Leave An Equal Opportunity Employer Job Posted by ApplicantPro

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer-focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay The HVAC (heating, ventilation, and air conditioning) Application Engineer for our Equipment business unit to provide support to our sales team and customers. What are we looking for • Associate degree in engineering required., • Ability to multi-task, work under pressure and meet deadlines required., • Desire to work in a team environment. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job DescriptionSalary: $80,000-$138,000 The Opportunity: The Lead Components Engineer is responsible for the control, selection, maintenance, design, and lifecycle management of electrical and mechanical components In addition to component engineering expertise, this role requires hands-on experience with PCB layout design to support design assessments, manufacturability reviews, and critical design decision making. . You will work cross-functionally with design, manufacturing, supply chain, and quality teams to ensure component reliability, availability, and compliance with industry standards. As a technical leader, you will also mentor a cross-functional team and drive strategic decisions to mitigate supply chain risks and ensure long-term product success. Our Technology: Were the world leader inResilient Positioning, Navigation and Timing (R-PNT)solutions that improve the reliability, performance, and safety of critical high-risk operations, even in GPS/GNSS denied environments. We provide virtually fail-safe GNSS and PNT solutions for military, defense contractors, and commercial applications worldwide. How I will Contribute: • Lead the selection, evaluation, and approval of electronic, electrical, and mechanical components for new and existing products, • Assess and mitigate component obsolescence, supply chain risks, and long lead time issues., • Collaborate with design engineering teams to provide component recommendations that meet cost, performance, reliability, and compliance objectives., • Conduct PCB layout assessments and reviews to ensure proper component placement, manufacturability, thermal management, and electrical performance, • Perform hands-on PCB layout tasks as needed to support design teams during critical phases of development, • Establish and manage relationships with key suppliers and manufacturers to stay informed of technology roadmaps and component lifecycle updates, • Ensure compliance with applicable regulatory and industry standards (e.g., RoHS, REACH, ITAR, MIL-STD, etc)., • Lead internal reviews and change control processes related to component substitutions and end-of-life scenarios, • Liaising with engineering, procurement, commercial, PCB and mechanical design teams, component manufacturers and suppliers to create and manage accurate component data., • Processing new component forms and augmenting the data supplied by the originator to include all pertinent information., • Maintaining the component data library by performing rationalization and data integrity audits., • Managing complete families of components in terms of original selection, change and obsolescence management., • Responsible for the integrity and version control of the company component data library., • Encouraging new component originators to conform to component engineering best-practice and procedures., • Identification and management of component IBIS models used for signal integrity simulation., • Creation of component PCB footprints to IPC standards., • Designing schematic symbols for components used on circuit diagrams. What You Bring to Safran Federal Systems: • B.S. in Electrical Engineering, Mechanical Engineering, or adjacent discipline is required, • 6+ years of experience in component engineering or related field, with 2+ years in a senior role, • Proficiency in PCB layout design tools (E.g., Cadence Allegro, Mentor Graphics Xpedition, Altium, or equivalent), • Strong understanding of PCB layout best practices, including high-speed design, EMI/EMC considerations, thermal management and manufacturability, • Deep understanding of electronic components and mechanical parts used in complex systems, • Experience with lifecycle management tools and component databases, • Familiarity with RoHS, REACH, WEEE, COSHH and other environmental standards., • Excellent communication skills with the ability to influence cross-functional teams and suppliers, • The person in this position needs to occasionally move about inside the office to access file cabinets, office machinery, etc., • The ability to remain poised under all circumstances, and to interact effectively with people in a positive manner that engenders confidence and trust., • Ability to reason logically and make sound decisions, to consider alternative and diverse perspectives, to communicate effectively both orally and in writing, • Ability to interact appropriately with a variety of individuals including customers/clients., • The person in this position needs to have an ability and willingness to travel up to 10% of the time., • Must be able to remain in a stationary position 50% of the time., • Strong knowledge of electrical design principles., • A thorough understanding of component parameters and the ideal and non-ideal properties of components., • Ability to have fun and work with an amazing team! About Safran Federal Systems: Safran Federal Systems has been awarded as aWinner of the USA Today and Rochester Metro Area Top Workplaces 2025 Award. In 2022, Safran acquired Orolia, now Safran Trusted 4D, the world leader in Resilient PNT. At the intersection of critical infrastructure and national defense, Safran Trusted 4D solutions govern and protect the integrity of systems that shape the world. In early 2019, Orolia Defense & Security spun off as a separate entity from its parent company Orolia, with the mission of providing resilient Positioning, Navigation and Timing (PNT) solutions and custom engineering services to U.S. Government agencies, U.S. Defense organizations, and their contractors. In August of 2019, Orolia Defense & Security acquired Talen-X, a U.S. company specializing in advanced GNSS (Global Navigation Satellite System) Simulation solutions and Interference, Detection, and Mitigation (IDM) technologies. Talen-X's portfolio was an ideal fit and has helped to enhance Safran FS's overall offerings. The acquisition enabled Talen-X's existing resources, operations, and capabilities to be scaled and accelerated to better support the warfighter. Read the press releasehere. Safran Federal Systems operates as a proxy-regulated company, Free of Foreign Ownership, Control, or Influence (FOCI). As such, Safran FS Defense & Security is approved to work on the full spectrum of U.S. Government classified and unclassified projects and is positioned to support strategic partnerships in the development of key PNT technologies for the defense market. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Please note this description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description PROCESS ENGINEER Celebrating over 50 years of excellence, Precise Tool & Manufacturing Inc. is a family-owned, Rochester-based leader in advanced CNC machining and custom manufacturing. Our 280,000 sq. ft. facility houses over 160 state-of-the-art CNC machines. With 50 high-speed 4-axis horizontal machines, we deliver exceptional efficiency and accuracy for intricate, multi-sided machining, allowing us to meet the most demanding production requirements with speed and precision. We are a trusted supplier across industries such as aerospace, defense, medical, energy, and power generation, recognized for our dedication to quality, safety, and innovation. At Precise Tool, we foster a collaborative work environment where employees are valued and supported. We offer competitive compensation, comprehensive benefits, and opportunities for professional development. Join our team and be part of a company that combines cutting-edge technology with a commitment to excellence and employee success. JOB SUMMARY Under the direct supervision of the Engineering Manager, the Process Engineer is responsible for performing a variety of manufacturing processes and engineering functions. ESSENTIAL FUNCTIONS: • Write manufacturing processes and enter in Epicor software. Work with the engineering group on machine processes and tooling., • Interface with department supervisors and machinists on a regular basis., • Utilize customer supplied CAD files when available to process manufacturing plan., • Utilize CAD to create work holding and fixturing layouts., • Interface with CNC programmers., • Notify Tool Crib of upcoming jobs., • Develop queuing system for kits ready to set up., • Verify tooling is available for jobs and ensure back-ups are available., • Coordinate all projects as they progress through the shop., • Monitor profitability as jobs are running., • Expedite any materials and components for jobs to ensure jobs stay on schedule., • Complete routing for customer jobs., • Work with engineering group and manufacturing to develop tooling and fixturing concepts for all new work., • Update all processes during and after production., • Work with manufacturing to ensure processes are being followed, and to incorporate time saving methods when suggested., • Investigate and provide disposition on discrepant/quality issues for jobs assigned., • Review assigned jobs with department manager at hand-off and when ready to move to the floor., • With a quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved., • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes., • Excellent written and oral communication skills., • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible., • Familiarity with all aspects of manufacturing including material specifications, turning, milling, heat treat, welding, plating and painting., • Attention to detail., • Customer focus., • Analytical and reasoning skills., • Proficiency with 3-D modeling software packages, Autodesk Inventor., • High School Diploma or equivalent required, • College degree preferred, but not required, • 10 years of machining or manufacturing experience required, • Vacation, • Sick Days, • Paid Holidays, • Health Insurance, one plan is 100% employer paid!, • Dental Insurance, • Vision Insurance, • Life Insurance, also 100% employer paid!, • 401(k) Plan According to the New York Pay Transparency law, pay range for this job is $29.00 - $43.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Precise Tool & Manufacturing Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Precise Tool & Manufacturing Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources at (585) 247-0700 Ext. 203.

Job DescriptionOverview Join Allied Universal® Technology Services, a global leader in transforming the security industry. We integrate advanced technology - video surveillance, electronic access control, alarm monitoring and augmented solutions with physical security to help people feel safe. Whether you're an installation technician, service technician, engineer, or project manager, you'll discover rewarding opportunities to grow your career as part of a valued team. Apply today and be phenomenal-build a meaningful career while protecting what matters most through innovative security technology. Job Description Allied Universal® Technology Services is hiring an Account Manager. The Account Manager will be essential in the achievement of branch sales goals by driving new business development across the assigned territory. The Account Manager will represent Allied Universal® Technology Services' core values through a consultative approach with clients and internal partners. RESPONSIBILITIES: • Business Development: Create and execute growth plans for a designated territory, aiming to expand Allied Universal® Technology Services' market share across diverse industries, • Sales Process Management: Oversee the full sales cycle, from prospecting (via self-sourced and company leads) to proposal, pricing, contract negotiation, tailored presentations, and post-close implementation, • Goal Achievement: Consistently exceed sales targets by driving new business throughout the territory, increasing project support and service offerings with current customers and partnering with the Director of Strategic Solutions for cross-selling opportunities with current physical security guarding clients, • Solution Presentation: Deliver presentations of Allied Universal® Technology Services' security solutions, including installation, service, maintenance agreements, and hosted managed services, • Account Management: Foster consultative relationships with clients, partners, and stakeholders for sustained business growth while collaborating with Project Managers to ensure consistent service delivery, • Efficient Scheduling: Strategically manage travel and appointments to maximize client interactions, • Market Awareness: Stay informed on industry trends, competitor activities, and emerging technologies to uncover new business opportunities, • Must possess one of the following:, • Bachelor's degree in Business, Business Development or related field, • Associate's degree in Business, Business Development or related field with a minimum of five (5) years of outside sales experience in a Business-to-Business environment selling a technical solution, • High school diploma with a minimum of ten (10) years of outside sales experience in a Business-to-Business environment, • Current driver's license if driving a company vehicle or personal vehicle while conducting business (e.g., client visits, attending networking events), • Minimum of three (3) years of outside sales experience in a Business-to-Business environment selling a technical solution, • Results-Driven: Consultative sales professional with a proven record of exceeding goals, • Relationship Builder: Knowledgeable and experienced in developing long-term client relationships and delivering high-quality service, • Organized and Strategic: Skilled in planning for cold calling, client meetings and site walks throughout the territory while consistently reporting on goal tracking and achievement, • Exceptional Communicator: Strong interpersonal and presentation skills, adept at crafting compelling presentations and written communications, • Brand Builder: Experienced in brand development using networks, associations, and social media for effective prospecting, • Multi-Tasker: Capable of managing multiple priorities in a fast-paced environment, with excellent follow-up skills, • Security Technology Industry: Electronic security solutions sales and account management experience, • Pay: $70,000.00 - $75,000.00 + auto allowance + gas card + commission plan, • Medical, dental, vision, basic life, AD&D, and disability insurance, • Enrollment in our company's 401(k)plan, subject to eligibility requirements, • Eight paid holidays annually, five sick days, and four personal days, • Vacation time offered at an accrual rate of 3.08 hours biweekly. Unused vacation is only paid out where required by law. #LI-BF1 Closing Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: If you have any questions regarding Equal Employment Opportunity, have difficulty using the online system and require an alternate method to apply, or require an accommodation at any time during the recruitment and/or employment process, please contact our local Human Resources department. To find an office near you, please visit: . Requisition ID 2025-1414889

Job DescriptionDescription: Precast Engineer - Civil/Structural Join Our Team as a Precast Engineer – Shape the Future of Concrete Design & Innovation! Fisher Associates is hiring a full-time Precast Engineer to design and engineer high-quality precast concrete components for a variety of civil and structural engineering projects. You’ll ensure every element meets structural codes, safety standards, and project specs—delivering safe, reliable, and cost-effective solutions. Collaborate with a skilled, supportive team and grow your engineering career in a flexible, impact-driven environment. Apply now and engineer the future with us! About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Execute precast engineering and design tasks efficiently., • Collaborate with project teams to deliver structurally sound, cost-effective, and visually appealing precast concrete designs., • Perform structural analysis and calculations to ensure safety under various loads and conditions., • Select materials and components for precast concrete production that meet strength, durability, and sustainability standards., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Support cost estimation., • Support Project Managers and Designers throughout the project lifecycle., • Promote, utilize and support QA/QC processes to guarantee quality deliverables. What We Offer Your Impact Matters, Your Career Thrives. Work on engaging precast engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Precast Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 0 - 5 years minimum of transportation/structural engineering experience, • Precast concrete design engineering course or design experience preferred, • EIT or ability to obtain it, • Proficiency in AutoCAD & RISA 3D, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver high quality work and solve problems with critical thinking and sound judgment., • Driven to take ownership of your projects, prioritize your tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships, • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset

Job Description Position:Manufacturing/Production Engineer Reports to:Plant Manager Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9002, ISO:14001, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: Manage engineering and project management effort for the company. This includes scheduling and completing engineering tasks on time and within budget. Administer Engineering document control. Supervise, mentor and train subordinates. Communicate with customers and production to ensure conforming product. Plan and allocate jobs. Resolve conflicts to meet deadlines. Minimum Qualifications: • Excellent verbal and written communication skills, • Have a team player attitude that promotes commitment, reliability and follow through, • Detail oriented with strong organizational skills, • Proven record of strong leadership and motivational skills coupled with sound decision making capabilities, • Ability to resolve problems using logical, systematic and sequential approaches, • Good computer skills with a proficiency in Microsoft Word and Excel, • Strong knowledge of best practices, methods and techniques pertaining to building, facilities and equipment maintenance and repair, • A minimum of five years relevant experience, • Degree in Mechanical Engineering or other related field required Supervisory Specific Duties: • Voice all concerns while working with production staff, Quality Assurance, Engineering and Operations any and all current or potential problems affecting production., • Review all new project release packages to verify that customers’ specifications are achievable., • Participate in new product launch meetings, • Assist Quality Assurance with establishing inspection documents and procedures., • Recommend continuous improvements actions for improving work processes. Departmental Specific Duties: • Quoting/Cost Estimating including; developing a Bill of Materials (BOM) for purchasing to facilitate pricing inquiries, calculating material usages, etc., • Review all new project release packages to verify that customer’s specifications are achievable. Participate in new-product-launch meetings, • Responsible for developing the manufacturing process for all parts. Assist operators with questions and provide technical advice., • Work with Production to improve efficiency on new and existing jobs, • Drive process improvements to generate cost reduction ideas., • Monitor actual job cost vs quoted job cost, • Help write the process sheets (travelers) for each job, • Analyze and improve processes for time/cost efficiencies, • Establish and maintain “machine utilization status”, • Help to create new travelers and/or modify existing travelers as per post program evaluation meetings, • Design machining, welding, inspection and assembly fixtures, • Help provide technical direction to operators as needed, • Supervise tools, fixtures, etc. if need, • Maintain engineering drawing and program files, • Must collaborate with customers to achieve desired results, • Provide engineering support to meet production schedules This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Job DescriptionDescription: Lead transportation projects, grow our regional presence, and advance your engineering career Fisher Associates is seeking a Senior Transportation Project Manager to lead high-impact highway and bridge design projects across the Harrisburg, Philadelphia, and Allentown corridor. This role offers a unique opportunity to help expand our presence in a key growth market while shaping the future of transportation infrastructure in Pennsylvania. Are you a licensed Professional Engineer (PE) or an Engineer-in-Training (EIT) nearing licensure? Join our mission-driven, multidisciplinary team and make a lasting impact through innovative civil and structural engineering solutions. About Fisher Associates Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Proactively pursue new business with existing and prospective clients by delivering exceptional service, promoting Fisher’s capabilities, and building lasting relationships., • Successfully lead mid-to-large-scale transportation projects from initial setup through planning, safety analysis, and project kick-off., • Manage project budgets, scope, schedule, and staffing to ensure successful and timely project delivery., • Lead design strategy and collaborate with teams, clients, partners, and stakeholders to align with client goals and ensure seamless project delivery., • Oversee project billing, client updates, QA/QC of deliverables, and project closeout., • Provide clear direction, motivation, and mentorship to team members., • Prepare winning project proposals and serve as primary client contact throughout the process., • Successfully navigate and implement complex public processes and municipal approvals., • Represent Fisher Associate’s in professional organizations, business boards, and community activities. Your Impact Matters, Your Career Thrives. Work on engaging projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Remote Requirements: What You Bring, Your Expertise as a Senior Transportation Project Manager • B.S. degree in Civil Engineering (Master’s preferred), • 10+ years transportation design engineering and project management experience, • Professional Engineering License (PE) preferred or ability to obtain it, • Proven client relationship and business development skills, • Proficiency in MS Office; MicroStation preferred, • Familiarity PennDOT design standards preferred, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines, • Foster trust and collaboration through integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job DescriptionDescription: Advance Your Career | Shape the Infrastructure of Tomorrow Fisher Associates is seeking a Bridge Design Engineer (Civil/Structural) with 5–10 years of experience to join our growing Bridge and Transportation Engineering team. Whether you're already licensed or on the path to PE certification, you'll gain mentorship and work on meaningful bridge and transportation infrastructure projects that enhance safety, sustainability, and connectivity in the communities we serve. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Support bridge design engineering, including load rating, structural analysis, and foundation design., • Develop design plans, construction documents, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Support project managers with schedules, documentation, and presentations., • Ensure designs adhere to state and local standards, regulations and safety codes., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Conduct field inspections and prepare detailed bridge inspection reports and analyze foundation design., • Provide technical support during construction, respond to RFIs and attend site visits. Your Impact Matters, Your Career Thrives. Work on engaging bridge design engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Bridge Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5-10 years of transportation experience, structures/bridge design engineering experience preferred, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in MicroStation, STAAD and Bridge Design Software, • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred), • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Demonstrated high-quality work and ability to problem solve applying critical thinking, and sound judgment to challenges, • Driven to take ownership of projects, prioritize tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships, • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset

Job DescriptionDescription: Precast Design Engineer - Civil/Structural Join Our Team as a Precast Design Engineer – Innovate and Lead in Concrete Design Are you ready to take your engineering career to new heights? Fisher Associates is seeking a skilled Precast Design Engineer to join our dynamic team, where your expertise in designing precast concrete components will make an impact on diverse civil and structural projects. Join Fisher Associates and bring your talents to a team that values innovation, collaboration, and your unique contributions. Apply now to advance your career and play a key role in impactful projects within a supportive and dynamic environment! About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Lead and execute precast engineering and design tasks efficiently., • Collaborate with project teams to deliver structurally sound, cost-effective, and visually appealing precast concrete designs., • Perform and review structural analysis and calculations to ensure safety under various loads and conditions., • Select materials and components for precast concrete production that meet strength, durability, and sustainability standards., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Support cost estimation for materials, • Support Project Managers and Designers throughout the project lifecycle., • Promote, utilize and support QA/QC processes to guarantee quality deliverables. Your Impact Matters, Your Career Thrives. Work on engaging precast engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid #LI-CA1 Requirements: What You Bring, Your Expertise as a Precast Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5 -10 years minimum transportation experience including Precast concrete design engineering, • Familiarity with ACI 318, ACI 350, ASCE-7, AASHTO and IBC codes, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in AutoCAD & RISA 3D, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver high quality work and solve problems with critical thinking and sound judgment., • Driven to take ownership of your projects, prioritize your tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships, • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset