Trabajos tooling en Houston, Texas - Page 4Crear alertas

Job DescriptionPosition: Process Engineer Report to: Senior Manager, Product & Process Engineering Department: Product & Process Engineering Location: Houston or relocation as required Main job function 1. CUSTOMER SATISFACTION: The Process Engineer will be responsible for all Technical liaisons with the customer, providing the key interface between the customer’s organization and the PCE organisation., 2. CHANGE MANAGEMENT: The Process Engineer will be responsible for coordinating all Engineering Changes that are introduced whilst the products are in volume manufacturing. This covers all internal and external communications and control of the exchange of documents with the customer. This responsibility also covers ECNs that are generated internally within PCE., 3. LIFE CYCLE MANAGEMENT: The Process Engineer will be responsible for the complete life cycle management from the request for quotation through to the end of life of the product and/or the customer relationship. Duties and Responsibilities (Including but not limited to...) 1. QUOTATIONS: The Process Engineer will be responsible for the analysis of all RFQ information received either from an existing Customer or from a new prospect. This will include analysis of all drawings, specifications, BOM, etc. Ensuring that there is the correct level of information in the correct format to allow an accurate and detailed quotation to be put together. As part of this responsibility, the Process Engineer will be responsible for calling a meeting of the Engineering groups to assign responsibilities and deadlines for quotations., 2. BOM / AVL: The Process Engineer has one key responsibility in the area of documentation, and that is to ensure that all BOM’s and AVL’s are maintained to the highest level of accuracy., 3. TEAMWORK: The Process Engineer will be required in several aspects of the job to pull together both Engineering and other cross -functional Teams for various projects. In this area the Process Engineer must be a good communicator both internally and externally and should be able to explain technical issues clearly and motivate individuals towards achieving the group goals., 4. DOCUMENTATION: The Process Engineer will be responsible for obtaining all customer documentation required internally by PCE to produce the customer products. This responsibility includes approving all documentation prior to release for PVT / NPI processes and also all changes / ECNs to existing products currently in Manufacturing., 5. PRODUCTION SUPPORT: The Process Engineer, along with all other Engineering groups, is employed to provide support for the Manufacturing Group, and to this end, the Process Engineer will be the focal point of contact for all problems that arise relating to the product during manufacturing., 6. NPI/PVT: The Process Engineer will be responsible for the coordination of the introduction of New Products into the manufacturing area. This involves the project management of all functions within the Plant and the construction of an integrated plan, taking into account the provision of all, Tools, Equipment, Training, Staffing, Materials, and Documentation. Also, when the Production Validation Test (PVT) is complete, the Process Engineer will be required to produce a report analysing the results and recommending either Corrective Actions and further PVT activity or release to Manufacturing for Volume Production., 7. LIFECYCLE MANAGEMENT: The Process Engineer will be responsible for the product during its entire life within Manufacturing, which will include the introduction, ramp to volume, steady state, and end of life. This will include working with other functions within the Facility to understand the implications on Tooling, Equipment, Materials and other general costs as these are all affected by changes to the products and the volumes, especially during the End of Life phase, 8. MEASUREMENTS: The Process Engineer will be measured on the following Categories. • ECN ACTIVITY, • NPI TURNAROUND TIME, • BOM / AVL ACCURACY, • SCRAP DUE TO OBSOLESCENCEThe Process Engineer will be responsible for reporting these measurements on a monthly basis. Job specification Qualifications/experiences 1. The Process Engineer must possess a good, positive manner and behave professionally and acceptably., 2. The Process Engineer must have a Diploma or a Degree in a relevant Engineering discipline., 3. The Process Engineer should have at least three years of experience in an Engineering role, preferably within the high-volume electronics manufacturing environment, 4. The Process Engineer will have a good command of English; further language skills would also be a benefit., 5. The Process Engineer will be a good communicator with the ability to work at all levels positively and constructively. • Degree in Electronics, Mechanics, or Electrical Engineering., • Rigorous and self-organised., • Fluent English. CZR87wWyVo

Job DescriptionSalary: DOE Position- Python AWS Developer/ Golang Developer Location- Plano, TX (Day 1 Onsite) Duration- Contract Responsibilities: Build elegant and scalable capabilities using Python and Golang for our software delivery platforms, with a strong focus on the developer experience, engineering excellence and software craftsmanship. Automate routine or repetitive tasks with high-quality and well-tested scripts/tooling. Practice a You Build It, You Own It philosophy, while demonstrating empathy for other software engineers and offering solutions when issues occur in our tools (i.e. troubleshooting failed builds, diagnosing issues in Dev, QA or Prod environments). Bring a passion to stay on top of tech trends, experiment with and learn new technologies, participate in internal & external technology communities, and mentor other engineers. Encourage innovation, inclusion, outside-of-the-box thinking, teamwork, self-organization, and diversity. Basic Qualifications: Bachelors degree in Computer Science, Engineering or Information Technology or equivalent Military experience. Professional experience as a software developer, using test-driven development to write your code using Python, Golang and building it using a CI/CD pipeline with maintainability and extensibility in mind. Experience with infrastructure automation tools (Terraform or CloudFormation) to build multi-tier infrastructure stacks in the Cloud. Experience working with build tools and container runtimes (Jenkins, Docker). Experience with one or more additional components in the full stack of an application, such as diagnosing networking issues for distributed systems in the cloud, application performance monitoring, or advanced knowledge of various utilities for Linux troubleshooting. Hands-on experience using Python or Golang for API development that automate manual tasks or increase the productivity of other product teams at an enterprise scale. Preferred Qualifications: At least 5 years combined experience in Python or Golang. Familiarity with AWS, including professional experience building, configuring and deploying mission-critical applications using EC2, RDS, S3, ECS, and Lambda with resiliency and scalability in mind. Familiarity with database design and programming, including relational modeling, index definition, and SQL. Experience working in an Agile environment managing your own workload and tasks effectively through JIRA Excellent written and verbal communication skills.

Job Description Advancing its Powering Progress strategy on the journey to net-zero emissions. Achieving this ambition requires uniting our strategic and technical expertise across data, strategy, architecture, and innovation. This integration is essential to drive the transformative shifts needed in IT. As part of this journey, we are seeking a skilled and seasoned Solution Architect to enhance automation and fully harness data and innovation. What's the role As a Solution Architect, you'll be a key technical leader providing end-to-end architecture development, consultancy, and assurance across projects, ensuring that applications are well-designed and aligned with our standards and reference architecture. You will be working specifically in the Products portfolio for Trading and Supply business. You will specifically work on a project team implementing a global Energy Trade and Risk Management (ETRM) solution on Azure to create a scalable, secure, and strategic landscape that enables the transformation of the Trading capabilities. Key responsibilities include: 1. Architecture and Technical Leadership • Provide strong leadership skills, including fostering collaboration, driving consensus, and effectively communicating complex technical concepts., • Not only lead in your area of expertise but also play a key role in shaping and transforming the role itself—identifying opportunities, driving innovation, and delivering impact that extends beyond the initial remit. As the organization grows, your role is expected to evolve, offering continuous opportunities for development, influence, and leadership., • Serve as the primary contact for architectural aspects of IT projects., • Integrate business process, data, application, technical, and information security dimensions into cohesive IT solutions., • Ensure solution architectures are documented using standard templates and tooling complying with architectural standards., • Guide detailed designers and business analysts during the design phase., • Review and formally approve detailed solution designs., • Support Lead Architect and participate in Architecture Review Board sessions as required. 2. Reference Model Stewardship • Actively contributes to the documentation, enhancement, and maintenance of Reference Models in BizzDesign or any other standard tooling., • Elevate project deliverables to conceptual and logical architecture levels. 3. Technology Foresight • Monitor emerging IT technologies and apply this insight to design future-ready solutions for Shell. 4. Standards Alignment • Stay informed of developments in our IT standards and services, ensuring they are incorporated into solution designs. 5. Community Engagement • Champion architectural excellence within the organization., • Engage with stakeholders to address architectural concerns and drive strategic improvements. What We Need from you • Industry Knowledge:, • Knowledge of the end-to-end Trading Business from deal inception through to settlement Technical Architecture & Design: • 10+ years in software and architecture delivery., • Own and drive technical architecture, design, and standards for software products in Commodities Trading., • Confidently lead architecture decisions across portfolios, managing divergent opinions., • Create pragmatic, implementable technical designs balancing risk, complexity, cost, and value., • TOGAF (or similar framework) experience and Enterprise Architecture tooling., • Collaboration & Communication:, • Collaborate with business and IT stakeholders for strategic and day-to-day technical decisions., • Strong communication and collaboration skills with 5+ years' experience in trading environments., • Listen to and interpret needs of technical and business stakeholders, manage expectations, and facilitate discussions., • Be an active participant in the wider Tech Lead and engineering communities., • Problem Solving & Innovation:, • Diagnose problems and implement innovative solutions fitting into the wider Trading picture., • Manage dependencies, overcome obstacles, and maximize value against constraints, managing trade-offs or technical debt., • Expert in one or more of the programming languages (Node.js, .Net, .Net Core, Python etc) with Cloud Native Platform Development (Azure/AWS), • Expert in one or more of the front-end development technologies (specifically React and Micro frontend)., • Expert in one or more of Data Development (SQL Databases, No SQL, Cloud Datastores etc) technologies, • Exposure to OpenLink Endur, SAP HANA, Salesforce, API management, Multifactor authentication., • Azure Platform & Cloud Native:, • Hands-on experience in architecting applications into the Azure platform, including migrations/re-platforming of legacy on-premise systems., • Engineering and architecture experience in designing and building containers, Microservices, Cloud Native applications, and federated Data platforms (Data Mesh)., • Data Architecture, Data Management & Diverse Data Types:, • Strong knowledge of data management: engineering, pipeline development, warehousing, storage, lifecycle management, privacy, security., • Experience with diverse data types: big data, high velocity streaming, IoT, low latency event triggers, longitudinal time series., • Proficient in SQL and NoSQL databases., • Azure Services & Integration:, • Significant experience with Azure Functions, Web Apps, distributed/event-driven architecture (event hub, event bus, Kafka), ELK., • Intermediate to advanced exposure to Azure Active Directory, Azure Data Factory, Azure Data Lake, Azure Storage, Azure Kubernetes Service, CosmosDB, Azure SQL., • Integration experience with Confluent/Kafka, API Management, Logic Apps., • CI/CD & DevOps: 5+ years in CI/CD delivery using Git/GitHub, VSTS/Azure DevOps, Terraform, Ansible., • Agile & Engineering Standards:, • Practical agile experience in both start-up and enterprise environments., • Lead the engineering community to follow Engineer Management standards, ensuring consistency and reuse., • Understand and deliver core engineering GPA objectives., • Create a collaborative environment for technical roles to drive clear decisions and consistency., • Documentation & Coordination:, • Address Business Process, Data, Application, Technical, and Information Security aspects of IT Solutions, documenting in High-Level Design documents., • Coordinate and develop information with third parties (Data Architects, IRM, Support Operations teams, Business stakeholders), internal and external.

Job DescriptionJOB SUMMARY: We are seeking a highly motivated Mechanical Engineer to join our PCBA (Printed Circuit Board Assembly) engineering team. This role is ideal for recent graduates or early-career professionals eager to build technical expertise in manufacturing and process engineering. You will receive structured on-the-job training and mentorship as you support the development, optimization, and maintenance of mechanical processes for high-quality electronic assemblies. RESPONSIBILITIES: • Assist in developing and implementing manufacturing process instructions (MPI)., • Support the design and optimization of mechanical tooling and fixtures for PCBA assembly., • Participate in process flow analysis to improve efficiency and manufacturability., • Conduct basic Design for Manufacturability (DFM) assessments., • Support failure analysis and troubleshooting under guidance from senior engineers., • Assist document and update standard operating procedures (SOPs)., • Collaborate with cross-functional teams including quality, test, and production. Education: • Bachelor’s degree in Mechanical Engineering, Industrial Engineering, or a related field., • Associate's degree in a relevant technical discipline with equivalent hands-on experience in electrical or manufacturing engineering. Experience:, • 0 + 2 years of experience in a manufacturing or industrial engineering environment., • Knowledge of PCBA (Printed Circuit Board Assembly) or manufacturing processes., • Exposure to or interest in testing, debugging and the use of test equipment in production environment is a plus., • Knowledge of using engineering lab tools or equipment.Skills:, • Foundational knowledge of mechanical engineering principles, with a strong interest in electronics manufacturing and PCBA processes., • Eagerness to learn and support the development, implementation, and optimization of PCBA manufacturing processes., • Familiarity with/or willingness to learn the PCBA equipment such as soldering machines, pick-and-place systems, and inspection tools (AOI, 5DX, ICT)., • Strong problem-solving skills with the ability to assist in root cause analysis and process troubleshooting., • Basic proficiency in CAD software (e.g., SolidWorks, AutoCAD) and Microsoft Office tools (Excel, Word, PowerPoint)., • Ability to work collaboratively in cross-functional teams and communicate technical information clearly., • Detail-oriented, organized, and committed to following engineering standards and quality practices., • Position may require up to 20 - 30% travel to other manufacturing sites. Powered by JazzHR iBh4zLjthf

Job Description Position Summary We are seeking a Mechanical Design Engineer with strong Creo experience to support the structural and enclosure design of server systems. This role focuses on sheet metal chassis development, detailed part design, and electronics component integration. The position works closely with the server lead and does not require ownership of airflow or thermal architecture. Responsibilities: * Design and develop sheet metal enclosures and structural chassis components for server systems using Creo. • Create detailed 3D models, 2D drawings, and complete assembly documentation including BOMs., • Perform mechanical integration of electronic components such as CPUs, GPUs, motherboards, power supplies, storage devices, and adapters., • Define part interfaces, mounting strategies, tolerance stack-up, and assembly sequences., • Support prototype builds, design verification, and engineering change implementation., • Perform tolerance analysis and ensure proper fit and alignment of structural components. Collaborate closely with the Server Lead to execute structural design improvements and product updates * Ensure designs comply with DFM principles and manufacturing requirements * Coordinate with suppliers and vendors for prototype fabrication, tooling feedback, and part qualification * Participate in design reviews and contribute to continuous improvement of enclosure and structural design standards * Support production ramp-up and resolve mechanical issues during pilot and early production phases Requirements: • Bachelor’s Degree or higher in engineering fields related to mechanical disciplines (Mechanical, Aerospace, Mechatronics, Robotics, etc.)., • Experience designing sheet metal enclosures using Creo., • Ability to work effectively in a team environment, sharing pertinent information, providing analysis, and recommendations in support of team efforts., • Bilingual in English and Mandarin is a plus. YZpZ4CA92U

Job DescriptionJoin a Global Leader in Oil & Energy Innovation ECI Group’s Professional Technical Services Network is seeking a skilled and seasoned Database | Data Platform Solution Architect to enhance automation and fully harness data and innovation. Our client, Shell is advancing its Powering Progress strategy on the journey to net-zero emissions. Achieving this ambition requires uniting Shell’s strategic and technical expertise across data, strategy, architecture, and innovation. This integration is essential to drive the transformative shifts needed in IT. This is a Houston based eleven month contract role. Note: Must be a US Citizen or US permanent residents to qualify to for this position. As a Database|Data Platform Solution Architect, you'll be a key technical leader providing end-to-end architecture development, consultancy and assurance across projects, ensuring that applications are well designed and aligned with Shell's standards and reference architecture. You will be working specifically in the Products portfolio for Shell's standards and reference architecture. You will work on a project team implementing a global Energy Trade and Risk Management (ETRM) solution on Azure to create a scalable secure and strategic landscape that enables the transformation of the trading capabilities. Roles and Responsibilities: 1. Architecture and Technical Leadership • Architect the Azure SQL Server platform, • Provide migration strategy: Oracle to SQL server (data and logic), • PL/SQL to T-SQL conversion and equivalence strategy, • Database sizing, right-tiering, and performance tuning, • Backup and disaster recovery for 15TB+ database on Azure, • Ongoing tuning through development, integration testing and UAT, • Work with engineering teams on infrastructure and long-term health, • Provide strong leadership skills, including fostering collaboration, driving consensus, and effectively communicating complex technical concepts., • Not only lead in your area of expertise but also play a key role in shaping and transforming the role itself—identifying opportunities, driving innovation, and delivering impact that extends beyond the initial remit. As the organization grows, your role is expected to evolve, offering continuous opportunities for development, influence, and leadership., • Serve as the primary contact for architectural aspects of IT projects., • Integrate business process, data, application, technical, and information security dimensions into cohesive IT solutions., • Ensure solution architectures are documented using standard templates and tooling complying with Shell’s architectural standards., • Guide detailed designers and business analysts during the design phase., • Review and formally approve detailed solution designs., • Support Lead Architect and participate in Architecture Review Board sessions as required.2. Reference Model Stewardship, • Actively contribute to the documentation, enhancement, and maintenance of Reference Models in BizzDesign or any other standard tooling., • Elevate project deliverables to conceptual and logical architecture levels.3. Technology Foresight, • Monitor emerging IT technologies and apply this insight to design future-ready solutions for Shell.4. Standards Alignment, • Stay informed of developments in Shell’s IT standards and services, ensuring they are incorporated into solution designs.5. Community Engagement, • Champion architectural excellence within the organization., • Must have led large Oracle to SQL Server migrations, • Designed backup and DR strategies for large databaes (15 TB+ scale) preferred., • Knowledge of the end-to-end Trading Business from deal inception through to settlementTechnical Architecture & Design:, • 10+ years in software and architecture delivery., • Own and drive technical architecture, design, and standards for software products in Commodities Trading., • Confidently lead architecture decisions across portfolios, managing divergent opinions., • Create pragmatic, implementable technical designs balancing risk, complexity, cost, and value., • TOGAF (or similar framework) experience and Enterprise Architecture tooling.Collaboration & Communication:, • Collaborate with business and IT stakeholders for strategic and day-to-day technical decisions., • Strong communication and collaboration skills with 5+ years' experience in trading environments., • Listen to and interpret needs of technical and business stakeholders, manage expectations, and facilitate discussions., • Be an active participant in the wider Tech Lead and engineering communities.Problem Solving & Innovation:, • Diagnose problems and implement innovative solutions fitting into the wider Shell Trading picture. Desirable Technologies & Programming Languages: • Expert in one or more of the programming languages (Node.js, .Net, .Net Core, Python etc) with Cloud Native Platform Development (Azure/AWS), • Expert in one or more of the front-end development technologies (specifically React and Micro frontend)., • Expert in one or more of Data Development (SQL Databases, No SQL, Cloud Datastores etc) technologies, • Exposure to OpenLink Endur, SAP HANA, Salesforce, API management, Multifactor authentication.Azure Platform & Cloud Native:, • Hands-on experience in architecting applications into the Azure platform, including migrations/re-platforming of legacy on-premise systems., • Engineering and architecture experience in designing and building containers, Microservices, Cloud Native applications, and federated Data platforms (Data Mesh).Data Architecture, Data Management & Diverse Data Types:, • 3+ years experience in Data Architecture including Logical data models and designing solutions using data platforms and medallion architecture., • Strong knowledge of data management: engineering, pipeline development, warehousing, storage, lifecycle management, privacy, security., • Experience with diverse data types: big data, high velocity streaming, IoT, low latency event triggers, longitudinal time series., • Proficient in SQL and NoSQL databases.Azure Services & Integration:, • Significant experience with Azure functions, web apps, distributed/event-driven architecture (event hub, event bus, Kafka), ELK., • Intermediate to advanced exposure to Azure Active Directory, Azure Data Factory, Azure Data Lake, Azure Storage, Azure Kubernetes Service, CosmosDB, Azure SQL., • Integration experience with Confluent/Kafka, API Management, Logic Apps., • CI/CD & DevOps: 5+ years in CI/CD delivery using Git/GitHub, VSTS/Azure DevOps, Terraform, Ansible.Agile & Engineering Standards:, • Practical agile experience in both start-up and enterprise environments., • Lead the engineering community to follow Shell Engineer Management standards, ensuring consistency and reuse., • Understand and deliver core engineering GPA objectives., • Create a collaborative environment for technical roles to drive clear decisions and consistency.Documentation & Coordination:, • Address Business Process, Data, Application, Technical, and Information Security aspects of IT Solutions, documenting in High-Level Design documents. IpRkN8g9v9

Job Description POSITION SUMMARY: Vallourec Star is seeking a CNC Operator for threading steel tubes is responsible for setting up, operating, and maintaining CNC machines to thread and chamfer steel tubes according to precise specifications. This role requires a high level of technical skill and attention to detail to ensure the quality and accuracy of the threaded tubes. KEY RESPONSIBILITIES: • Assist in performing setups., • Perform machine adjustments, changeovers, and offset adjustments as needed, • Select and load part programs, and change inserts and tooling, • Perform routine maintenance on CNC machines, including checking and replenishing cooling fluids and making necessary adjustments (CCLs), • Operate CNC lathe in accordance with Vallourec operating instructions., • Use precision gages, micrometers, and other applicable measurement instruments to validate compliance of product., • Always maximize efficiency and productivity, • Responsible for quality of work meeting all requirements, • Follow all Company work instructions, specifications, and requirements, • Follow all Company Rules, Procedures and Policies, • Always place Safety first and follow all Company Safety Rules, • Any other duties as assigned, • Must read, write, and communicate in the English language EXPERIENCE, SKILLS, AND KNOWLEDGE: • Minimum of 1 year experience as a CNC Operator in previous job/or 1 year experience as Production Operator., • Must have a good understanding of machine shop operations and processes., • Ability to read blueprints, micrometers, and other precision measuring instruments., • Ability to understand and execute instructions well., • Must read, write, and communicate in the English language EDUCATION, TRAINING, AND CERTIFICATIONS: • High School diploma or equivalent is preferred CRITICAL COMPETENCIES & CAPABILITIES: • Teamwork, • Adaptability, • Accountability, • Reliability/dependability, • Initiative, • Safety awareness, • Ability to receive and provide constructive feedback, • Pride in performance, • Continuous Improvement/Quality, • Communication, • Positive responses to change, • High attention to detail

Job Description Position: CNC Lead Machinist Location: Houston, TX 77051 Schedule: 4pm to 12:30am – 2nd shift Hourly Rate: $30-$32+1 per hour DOE Employment Type: Contract/Full-time About the Role: The CNC Lead will oversee machine production and apply knowledge of mechanics to ensure the quality and precision of manufactured parts. This role is responsible for production runs and modifying existing programs for different machines. The CNC Lead will work closely with machine operators during the manufacturing process to perform quality checks and ensure parts are produced according to specifications, making manual adjustments when necessary. This position will also support daily shop operations, assist with operator training, and help ensure production schedules, safety standards, and quality expectations are met. Duties and Responsibilities: • Lead and support CNC operators while working closely with management, • Assist with daily production operations when the manager is not available, • Train operators how to properly run CNC machine, • Troubleshoot and resolve machine issues as they arise, • Read and interpret technical drawings and set up machines according to blueprint, • Perform quality assurance checks to ensure parts meet design specifications, • Select proper tooling required to cut specific materials and program machines accordingly, • Ensure all equipment is functioning properly and report maintenance issues to management, • Ensure operators understand and meet quality expectations for their assigned work, • Coordinate daily work activities based on production schedules, • Organize workflow and manage product flow efficiently, • Assist with scheduling manpower, maintenance, and production timelines to meet delivery requirements, • Maintain housekeeping standards throughout the shop, • Ensure employees have the tools and resources needed to perform their work successfully, • Set hourly and daily performance expectations and support operators in achieving production goals, • Maintain positive employee relations while working with management and supervisors, • Promote and enforce safety standards and train employees on proper safety proceduresRequirements and Qualifications:, • High school diploma or equivalent required, • Knowledge of precision measurement and tolerances, • Strong Knowledge of CNC programs in EIA and Mazatrol, • Completion of a technical certificate or associate degree program preferred, • Experience working in a manufacturing or machining environment required, • Basic math and computer skills required, • Strong attention to detail, • Ability to read and interpret technical drawings, blueprints and verify part accuracy, • Strong troubleshooting and problem-solving skills, • Ability to work independently while closely following instructions, • Positive and professional attitude, • Ability to stand for extended periods of time, • Ability to lift up to 50 pounds for short periods of timePreferred Experience, • Minimum 5 years of experience with Mazak lathe machines with live tooling, • Experience working with Mazak Multiplex machines with gantry loader preferred Interested? Applicants must apply before reaching out. Questions may be directed via text only to Rick Lopez at 281-479-7079 or Maira at 281-479-1801. Equal Opportunity Employer We celebrate diversity and are committed to creating an inclusive environment for all applicants, including protected veterans and individuals with disabilities. About Us: Integrity Trade Services’ core philosophy is "Staffing you can trust." We are dedicated to safety, honesty, fairness, and integrity, providing reliable job opportunities that get you to work quickly, safely, and fairly compensated. #HIGH1 #ZR

Job DescriptionDescription: Responsible for coordinating production planning, scheduling, and procurement to ensure on-time delivery to customers. This role manages inventory levels, issues purchase orders, plans machine capacity, and works closely with suppliers, production teams, and engineering to support efficient manufacturing operations. Production Planning & Scheduling • Develop and maintain production schedules for machines and secondary operations., • Review sales forecasts, customer orders, and inventory levels to determine production requirements., • Coordinate with manufacturing supervisors to ensure optimal machine utilization, labor allocation, and material availability., • Source and purchase raw materials, resins, colorants, packaging, inserts, and tooling components., • Manage supplier performance, negotiate pricing, and maintain strong supplier relationships., • Issue and maintain purchase orders, ensuring accurate lead times, quantities, and delivery dates., • Develop and implement production plans for injection molding & assembly operations to meet customer order commitments., • Monitor inventory levels of components, packaging & raw materials, placing purchase orders as needed while maintaining optimal stock levels., • Build and maintain strong relationships with suppliers; negotiate pricing for materials related to injection molding processes., • Ensure timely delivery of materials to minimize production downtime while adhering to quality standards., • Utilize ERP/MRP systems for tracking inventory, production schedules, and order fulfillment., • 2–5+ years of experience in planning, buying, or supply chain roles., • Proficient in inventory management software and Microsoft Office Suite, particularly Excel. Preferred Skills: • Experience with Lean Manufacturing principles and methodologies., • Familiarity with ERP systems, specifically those used in manufacturing contexts., • Excellent analytical, organizational, and communication skills., • Ability to work collaboratively & independently in a fast-paced environment and manage multiple priorities effectively.

Job Description Position Summary This position is fully accountable for the planning, development, coordination, execution, and schedule performance of engineering projects related to after-market parts and service and capital equipment sales. These projects may be in the areas of quote support, order fulfillment, and product improvement, as well as documentation / certification processes and procedures. This position will manage major projects, including directing work of others, and instruct others managing smaller projects. Additionally, this position provides technical assistance to the Company's product lines to maintain and improve marketing position, growth, and financial goals Essential Duties and Responsibilities • Project Management:, • Manage projects of varying size from receipt of order through design, procurement, fabrication testing, shipment, installation, and start-up., • Coordinate the effort and contributions of subordinate engineers and staff, delegating and assigning responsibilities to obtain economic and timely results., • Interface with customers to design equipment and execute projects managing consideration of customer needs, internal/external production capabilities, financial targets, and available resources. This involves maximizing use of existing designs, and efficiently developing new designs through detailed calculations, design software, and collaboration with others, • Perform liaison work involved by contacting other departments (Purchasing, Manufacturing, Sales, etc.) as well as outside vendors, to obtain services or pertinent information relative to functional needs., • Based on customer requirements, company strategy, and direction of engineering management, determine make versus buy decision for various items of a project., • Product Design:, • Prepare drawings and 3D models of various parts or products and produce general assembly drawings and sub-assembly drawings using Autodesk software products, incorporating a detailed understanding of manufacturing processes into designs. This position also assists in translating designs into structured requirements within the company MRP system., • Accept and manage product development projects. o Understand and translate effectively into design parameters manufacturing process and capacity constraints associated with current sources for production., • Technical Sales and Customer Service Support, • Directly support and engage in generating quotes for parts, service, and capital equipment by identifying requirements and providing summaries of costs and lead time. This work involves technical bid package evaluation, generating technical responses, accumulating documentation, gathering cost information, and finalizing formal packages. Additionally, this involves reviewing customer needs and applications and identifying available solutions., • Accept requests from customers to troubleshoot technical issues with products and develop solutions with customers in an efficient and professional manner., • Support testing activities at the company test center when necessary., • Continuously seek to build understanding of products and industries and convert those into standards, training, and sales support literature., • Support strategic company initiatives in areas such as Lean as requested., • Occasional travel to alternate company and vendor sites when required for training and oversight., • Occasional travel to customer sites to provide support of equipment start-up, internal and external training, and direct sales support., • Attend trade shows, exhibitions, and other possible functions as required. Education Bachelor's degree (B.S.) or equivalent from a college or university in Engineering, preferably Mechanical. Associates Degree with significant relevant experience is also acceptable. 4 to 12 years of broad engineering experience including product design, manufacturing methodology, tooling, laboratory, etc. is typical for this position. Skills/Experience Language Skills: Reading/writing/speaking fluency in the English language is required. Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Mathematical Skills: Ability to work with mathematical concepts such as fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Understanding of complex algebraic equations and calculus is a plus but not a requirement. Reasoning Ability: Plan and perform a wide variety of duties requiring general knowledge of company policies and procedures applicable within area of responsibilities and including their application to cases not previously covered. Requires considerable judgment to work independently toward general results, devising methods, modifying, or adapting standard procedures to meet different conditions, making decisions based on precedent and company policies Other Skills and Abilities • • Ability to interpret an extensive variety of technical instructions in mathematical or diagram form, • Ability to apply mathematical operations to frequency distributions, reliability and validity of tests, normal curve, analysis of variance, correlation techniques, chi-square application and sampling theory and factor analysis, • Ability to use personal computer and related software including Autodesk products, • Must possess a valid driver's license in state of residence and be insurable under company's motor vehicle insurance policy.

Job Description Software Assurance Manager - Lunar Terrain Vehicle (NASA LTVS Award Contingent) Houston, Texas, United States About Intuitive Machines Intuitive Machines is an innovative and cutting-edge space company making cislunar space accessible to both public and private customers. Our mission is to further science and exploration, communications, and economic progress from the Earth to the Moon and beyond. With the first commercial lunar landing in history, multiple NASA lunar missions in development, and additional private missions on our manifest, we pride ourselves in supporting our customers and the nation in paving the way to return humans to the surface of the Moon. Our world-class team includes experts in all aspects of spacecraft subsystems design, development, and test, on-orbit operations, and safety. About The Position We are seeking a Software Assurance Manager to own the integrity and quality of the software produced for the Lunar Terrain Vehicle (LTV). This position will manage and shape the processes for software quality- both manual and automated, as well as craft and conduct the test plan for LTV software. LTV Software is developed under a high assurance paradigm, requiring close and frequent interaction with developers, peers and stakeholders. Thus, this is a 100% on-site position located at our Lunar Payload Operations Center (LPOC) facility in Houston, TX. *Employment in this role is contingent upon NASA selecting Intuitive Machines as the winner of the LTVS program, scheduled for announcement later in 2025. Responsibilities: • Represent IM as the primary point-of-contact with NASA software assurance and quality oversight, • Manage and shape efficient software life cycle processes and methodologies to produce demonstrable software quality and compliance, • Ensure development processes and methodologies continuously meet CMMI-DEV Level 3 standards, • Coordinate with software leads and contributing organizations to ensure software quality and assurance are being prioritized and met, • Drive and generate metrics to quantify software quality, • Review and approve of software test artifacts and mechanisms including procedures, reports, and test evidence, • Participate in Safety Control Board forums to ensure that assurance methods and status are consistent with safety needs, • Support project and program level review milestones and deliverables, • Track usage, versioning and compliance of tools utilized in software assurance methods Qualifications: • B.S. in computer science, computer engineering, or similar, • 5+ years of industry experience in a software quality assurance role- auditing and assessing software process compliance against standards (CMMI-DEV, AS9115, DO-178C, or similar), • Experience with coordinating and conducting Independent Verification and Validation (IV&V) campaigns, • Experience with drafting and executing project-level software test plans on large projects, • Experience working with NASA Software Assurance and Software Safety Standards (NASA-STD-8739.8), • Experience working with NASA Procedural Requirements for Software Engineering (NPR-7150.2), • Experience working with NASA Human-rating requirements for software (NPR-8705.2), • Familiar with various software development processes and approaches- agile, spiral, iterative and waterfall, • Familiar with Continuous Integration (CI) and Continuous Deployment (CD) approaches and tooling, • Excellent written and oral communication skills, • Capable of both high quantity and high-quality output, • Ability to work in a fast paced, hard charging, and high stakes environment, • Must have a passion for spaceflight! Desired: • M.S. in computer science, computer engineering, MBA or similar, • Experience with unit testing frameworks, • Background in software testing, • Background in software development, • Knowledge of ITAR/EAR compliance methods US EEO Statement Intuitive Machines is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.

Job DescriptionDescription: We are ERock! Enchanted Rock is a leader and innovator of Electrical Resiliency-As-A-Service. Our advanced dual-purpose microgrids protect companies, critical infrastructure, and communities from unexpected power outages, ensuring business continuity and civic durability. Enchanted Rock’s dual-purpose microgrids use natural gas and renewable natural gas (RNG) to drive the nation’s most dependable microgrids — all while producing significantly lower to zero carbon emissions than traditional diesel backup generators. Enchanted Rock solutions provide 24/7/365 monitoring, optimization, and forecasts to enable worry-free, reliable power for businesses. The Enchanted Rock solution brings together patented technologies, advanced dual-purpose microgrid designs and integrated end-to-end services. The Power is On and we keep it on. What you’ll do… The Senior SCADA Engineer will lead the design, implementation, integration, and administration of our VTSCADA and real-time operational systems supporting distributed energy assets. This role combines engineering depth, system ownership, and team leadership, with responsibility for designing scalable SCADA architecture that enables rapid fleet growth while proactively improving system reliability to reduce downtime and operational risk. You will serve as the technical authority across SCADA architecture, integrations, grid support telemetry, and real-time operations systems. Key Responsibilities: SCADA Architecture & System Ownership • Own and evolve SCADA architecture supporting Enchanted Rock’s distributed generation and microgrid fleet, • Develop and maintain SCADA systems, partnering with cross-functional teams to enhance data flow, system performance, and operational visibility, • Provide technical design oversight, set priorities, and serve as escalation authority, • Serve as technical authority for Autosol ACM and related real-time systems, • Establish enterprise standards for telemetry, tag structure, alarm management, and data integrity, • Provide support for our 24x7 Microgrid Control Center, • Design scalable solutions enabling rapid site onboarding and fleet growth, • Lead ICCP configuration and utility data exchange with ERCOT and other market participants, • Architect telemetry models supporting ERCOT compliance and grid participation, • Oversee engineering and commissioning of new site integrations, • Maintain performance, resilience, and uptime of real-time operational SCADA systems, • Provide technical review of site SCADA drawings; architect monitoring and control schemes; establish tag/point standards; and oversee configuration and programming of SCADA, including HMIs, historians, and controllers., • Support upgrades, migrations, and technology enhancements, • Drive automation, tooling, and database enhancements to improve scalability and visibility, • Strengthening change management and deployment governance across the SCADA environment, • Bachelor’s degree in Electrical Engineering, Computer Engineering, Computer Science, or related field (or equivalent practical experience), • 7+ years of SCADA (VTSCADA, Siemens, Emerson or similar) engineering experience within energy, gas or electric utility environments, • 5+ years of hands-on experience supporting real-time operational systems, • Experience designing and implementing ICCP integrations, including utility data exchange with ERCOT, RTOs, or other ISOs, • Familiarity with CAD and electrical schematics., • Experience with Autosol ACM or comparable utility-grade SCADA platform, • Strong understanding of grid support operations, dispatch protocols, and telemetry architecture, • Experience supporting distributed energy resources (DER), microgrids, or gas generation assets, • Strong knowledge of distributed systems, infrastructure technologies (Windows servers, virtualization, networking, cybersecurity), and relational databases (e.g., MS SQL), • Proven ability to troubleshoot complex, multi-layer communications and telemetry systems, • Experience establishing and improving alarm management, change management, and system governance standards, • Demonstrated track record of improving system reliability, reducing operational risk, and enhancing real-time system performance, • Medical, Dental, Vision, and Prescription Drug Insurance, • Company-Paid Life Insurance, • Disability Insurance, • Paid Family Leave, • Flexible Spending Account (FSA), • Wellness Programs and Incentives, • 401(k) Retirement Plan & Company Match, • Paid Time Off – Sick & Vacation Time, • Paid Holidays, • Hybrid Work Schedule. 3-4 days/week in Houston Office! The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Enchanted Rock is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. At Enchanted Rock, we embrace diversity, including all the unique characteristics that make us human: race, age, sexual orientation, gender identity, religion, disability, and education — to name a few. We understand and recognize that diverse backgrounds and perspectives strengthen our teams and our business. The foundation of our diversity efforts is closely tied to our core values specifically our value of “The Team” which includes “Mutual Respect, Openness, and Honesty.”

Job DescriptionCNC Lathe Machinist Houston, TX Pay: $30.00/hour Duration: 3-month project with potential for temp-to-hirePosition OverviewWe are seeking an experienced CNC Lathe Machinist with strong Mastercam programming experience to support a 3-month project with the potential to become a full-time role. This position requires hands-on expertise programming, setting up, and operating CNC lathes while ensuring high-quality machining and adherence to production standards.Responsibilities • Create efficient and accurate CNC Lathe programs using Mastercam based on blueprints, CAD models, and job specifications., • Set up and operate CNC Lathe machines, ensuring proper material loading and machine configuration., • Configure tool registers and apply offsets/compensations according to job requirements., • Interpret technical drawings and blueprints to guide machining operations., • Perform detailed inspections using micrometers, calipers, gauges, and other precision measuring instruments., • Verify machine settings and ensure parts meet quality and tolerance specifications., • Design and build custom fixtures to support efficient and precise machining., • Select appropriate cutting tools, work holding, fixtures, and machining parameters for production needs., • Conduct routine maintenance and ensure machines remain calibrated and safe to operate., • Troubleshoot and resolve mechanical or machining process issues., • Follow all safety procedures and guidelines when operating machinery and handling materials., • Collaborate with cross-functional teams to meet production deadlines and quality standards., • Maintain a clean, organized, and efficient work area., • Perform additional duties as needed to support production and business needs.Qualifications, • High school diploma or equivalent required; technical or vocational training in machining preferred., • Minimum 5 years of Mastercam programming experience for CNC Lathes., • Minimum 5 years of hands-on CNC Lathe setup and operation experience., • Experience machining metals including:, • 300 Series Stainless Steel, • Nitronic 6, • PH Stainless Steels (15-5, 17-4), • Aluminum, • Bronze, • MP35N, • InconelRequirements, • Strong understanding of CNC G-code and M-code programming., • Ability to read and interpret blueprints, technical drawings, and machining specifications., • Knowledge of metal machining properties, tooling, and cutting parameters., • Proficiency with precision measuring tools including micrometers, calipers, indicators, and gauges., • Experience working with tight tolerances and surface finish requirements., • Ability to work independently, troubleshoot issues, and maintain production workflow., • Strong shop math and mechanical aptitude related to CNC lathe operations., • Excellent attention to detail, organization, and time management skills.

Job Description:\n\nEHC is currently looking for a CNC Lead Machinist in the Houston Area Job Title: CNC Lead Machinist Shift: 2nd Shift – 4:00 PM – 12:30 AM Job Summary The CNC Lead will oversee machine production and apply knowledge of mechanics to ensure the quality and precision of manufactured parts. This role is responsible for production runs and modifying existing programs for different machines. The CNC Lead will work closely with machine operators during the manufacturing process to perform quality checks and ensure parts are produced according to specifications, making manual adjustments when necessary. This position will also support daily shop operations, assist with operator training, and help ensure production schedules, safety standards, and quality expectations are met. Duties and Responsibilities · Lead and support CNC operators while working closely with management · Assist with daily production operations when the manager is not available · Train operators how to properly run CNC machine · Troubleshoot and resolve machine issues as they arise · Read and interpret technical drawings and set up machines according to blueprint · Perform quality assurance checks to ensure parts meet design specifications · Select proper tooling required to cut specific materials and program machines accordingly · Ensure all equipment is functioning properly and report maintenance issues to management · Ensure operators understand and meet quality expectations for their assigned work · Coordinate daily work activities based on production schedules · Organize workflow and manage product flow efficiently · Assist with scheduling manpower, maintenance, and production timelines to meet delivery requirements · Maintain housekeeping standards throughout the shop · Ensure employees have the tools and resources needed to perform their work successfully · Set hourly and daily performance expectations and support operators in achieving production goals · Maintain positive employee relations while working with management and supervisors · Promote and enforce safety standards and train employees on proper safety procedures Requirements and Qualifications · High school diploma or equivalent required · Knowledge of precision measurement and tolerances · Strong Knowledge of CNC programs in EIA and Mazatrol · Completion of a technical certificate or associate degree program preferred · Experience working in a manufacturing or machining environment required · Basic math and computer skills required · Strong attention to detail · Ability to read and interpret technical drawings, blueprints and verify part accuracy · Strong troubleshooting and problem-solving skills · Ability to work independently while closely following instructions · Positive and professional attitude · Ability to stand for extended periods of time · Ability to lift up to 50 pounds for short periods of time Preferred Experience · Minimum 5 years of experience with Mazak lathe machines with live tooling · Experience working with Mazak Multiplex machines with gantry loader preferred · Strong knowledge of Mazatrol programming language and G-code programming o Title: CNC Lead MachinistShift: 2nd Shift – 4:00 PM – 12:30 AMJob SummaryThe CNC Lead will oversee machine production and apply knowledge of mechanics to ensure thequality and precision of manufactured parts. This role is responsible for production runs andmodifying existing programs for different machines. The CNC Lead will work closely with machineoperators during the manufacturing process to perform quality checks and ensure parts areproduced according to specifications, making manual adjustments when necessary.This position will also support daily shop operations, assist with operator training, and help ensureproduction schedules, safety standards, and quality expectations are met.Duties and Responsibilities• Lead and support CNC operators while working closely with management• Assist with daily production operations when the manager is not available• Train operators how to properly run CNC machine• Troubleshoot and resolve machine issues as they arise• Read and interpret technical drawings and set up machines according to blueprint• Perform quality assurance checks to ensure parts meet design specifications• Select proper tooling required to cut specific materials and program machines accordingly• Ensure all equipment is functioning properly and report maintenance issues tomanagement• Ensure operators understand and meet quality expectations for their assigned work• Coordinate daily work activities based on production schedules• Organize workflow and manage product flow efficiently• Assist with scheduling manpower, maintenance, and production timelines to meet deliveryrequirements• Maintain housekeeping standards throughout the shop• Ensure employees have the tools and resources needed to perform their work successfully• Set hourly and daily performance expectations and support operators in achievingproduction goals • Maintain positive employee relations while working with management and supervisors• Promote and enforce safety standards and train employees on proper safety proceduresRequirements and Qualifications• High school diploma or equivalent required• Knowledge of precision measurement and tolerances• Strong Knowledge of CNC programs in EIA and • Completion of a technical certificate or associate degree program preferred• Experience working in a manufacturing or machining environment required• Basic math and computer skills required• Strong attention to detail• Ability to read and interpret technical drawings, blueprints and verify part accuracy• Strong troubleshooting and problem-solving skills• Ability to work independently while closely following instructions• Positive and professional attitude• Ability to stand for extended periods of time• Ability to lift up to 50 pounds for short periods of timePreferred Experience• Minimum 5 years of experience with Mazak lathe machines with live tooling• Experience working with Mazak Multiplex machines with gantry loader preferred• Strong knowledge of programming language and G-code programming o Tile: CNC Lead MachinistShift: 2nd Shift – 4:00 PM – 12:30 AMJob SummaryThe CNC Lead will oversee machine production and apply knowledge of mechanics to ensure thequality and precision of manufactured parts. This role is responsible for production runs andmodifying existing programs for different machines. The CNC Lead will work closely with machineoperators during the manufacturing process to perform quality checks and ensure parts areproduced according to specifications, making manual adjustments when necessary.This position will also support daily shop operations, assist with operator training, and help ensureproduction schedules, safety standards, and quality expectations are met.Duties and Responsibilities• Lead and support CNC operators while working closely with management• Assist with daily production operations when the manager is not available• Train operators how to properly run CNC machine• Troubleshoot and resolve machine issues as they arise• Read and interpret technical drawings and set up machines according to blueprint• Perform quality assurance checks to ensure parts meet design specifications• Select proper tooling required to cut specific materials and program machines accordingly• Ensure all equipment is functioning properly and report maintenance issues tomanagement• Ensure operators understand and meet quality expectations for their assigned work• Coordinate daily work activities based on production schedules• Organize workflow and manage product flow efficiently• Assist with scheduling manpower, maintenance, and production timelines to meet deliveryrequirements• Maintain housekeeping standards throughout the shop• Ensure employees have the tools and resources needed to perform their work successfully• Set hourly and daily performance expectations and support operators in achievingproduction goals • Maintain positive employee relations while working with management and supervisors• Promote and enforce safety standards and train employees on proper safety proceduresRequirements and Qualifications• High school diploma or equivalent required• Knowledge of precision measurement and tolerances• Strong Knowledge of CNC programs in EIA and l• Completion of a technical certificate or associate degree program preferred• Experience working in a manufacturing or machining environment required• Basic math and computer skills required• Strong attention to detail• Ability to read and interpret technical drawings, blueprints and verify part accuracy• Strong troubleshooting and problem-solving skills• Ability to work independently while closely following instructions• Positive and professional attitude• Ability to stand for extended periods of time• Ability to lift up to 50 pounds for short periods of timePreferred Experience• Minimum 5 years of experience with Mazak lathe machines with live tooling• Experience working with Mazak Multiplex machines with gantry loader preferred• Strong knowledge of programming language and G-code programming Job Title: CNC Lead MachinistShift: 2nd Shift – 4:00 PM – 12:30 AMJob SummaryThe CNC Lead will oversee machine production and apply knowledge of mechanics to ensure thequality and precision of manufactured parts. This role is responsible for production runs andmodifying existing programs for different machines. The CNC Lead will work closely with machineoperators during the manufacturing process to perform quality checks and ensure parts areproduced according to specifications, making manual adjustments when necessary.This position will also support daily shop operations, assist with operator training, and help ensureproduction schedules, safety standards, and quality expectations are met.Duties and Responsibilities• Lead and support CNC operators while working closely with management• Assist with daily production operations when the manager is not available• Train operators how to properly run CNC machine• Troubleshoot and resolve machine issues as they arise• Read and interpret technical drawings and set up machines according to blueprint• Perform quality assurance checks to ensure parts meet design specifications• Select proper tooling required to cut specific materials and program machines accordingly• Ensure all equipment is functioning properly and report maintenance issues tomanagement• Ensure operators understand and meet quality expectations for their assigned work• Coordinate daily work activities based on production schedules• Organize workflow and manage product flow efficiently• Assist with scheduling manpower, maintenance, and production timelines to meet deliveryrequirements• Maintain housekeeping standards throughout the shop• Ensure employees have the tools and resources needed to perform their work successfully• Set hourly and daily performance expectations and support operators in achievingproduction goals • Maintain positive employee relations while working with management and supervisors• Promote and enforce safety standards and train employees on proper safety proceduresRequirements and Qualifications• High school diploma or equivalent required• Knowledge of precision measurement and tolerances• Strong Knowledge of CNC programs in EIA and Maza Completion of a technical certificate or associate degree program preferred• Experience working in a manufacturing or machining environment required• Basic math and computer skills required• Strong attention to detail• Ability to read and interpret technical drawings, blueprints and verify part accuracy• Strong troubleshooting and problem-solving skills• Ability to work independently while closely following instructions• Positive and professional attitude• Ability to stand for extended periods of time• Ability to lift up to 50 pounds for short periods of timePreferred Experience• Minimum 5 years of experience with Mazak lathe machines with live tooling• Experience working with Mazak Multiplex machines with gantry loader preferred• Strong knowledge o programming language and G-code programming Job Title: Job Title: CNC Lead MachinistShift: 2nd Shift – 4:00 PM – 12:30 AMJob SummaryThe CNC Lead will oversee machine production and apply knowledge of mechanics to ensure thequality and precision of manufactured parts. This role is responsible for production runs andmodifying existing programs for different machines. The CNC Lead will work closely with machineoperators during the manufacturing process to perform quality checks and ensure parts areproduced according to specifications, making manual adjustments when necessary.This position will also support daily shop operations, assist with operator training, and help ensureproduction schedules, safety standards, and quality expectations are met.Duties and Responsibilities• Lead and support CNC operators while working closely with management• Assist with daily production operations when the manager is not available• Train operators how to properly run CNC machine• Troubleshoot and resolve machine issues as they arise• Read and interpret technical drawings and set up machines according to blueprint• Perform quality assurance checks to ensure parts meet design specifications• Select proper tooling required to cut specific materials and program machines accordingly• Ensure all equipment is functioning properly and report maintenance issues tomanagement• Ensure operators understand and meet quality expectations for their assigned work• Coordinate daily work activities based on production schedules• Organize workflow and manage product flow efficiently• Assist with scheduling manpower, maintenance, and production timelines to meet deliveryrequirements• Maintain housekeeping standards throughout the shop• Ensure employees have the tools and resources needed to perform their work successfully• Set hourly and daily performance expectations and support operators in achievingproduction goals • Maintain positive employee relations while working with management and supervisors• Promote and enforce safety standards and train employees on proper safety proceduresRequirements and Qualifications• High school diploma or equivalent required• Knowledge of precision measurement and tolerances• Strong Knowledge of CNC programs in EIA and • Completion of a technical certificate or associate degree program preferred• Experience working in a manufacturing or machining environment required• Basic math and computer skills required• Strong attention to detail• Ability to read and interpret technical drawings, blueprints and verify part accuracy• Strong troubleshooting and problem-solving skills• Ability to work independently while closely following instructions• Positive and professional attitude• Ability to stand for extended periods of time• Ability to lift up to 50 pounds for short periods of timePreferred Experience• Minimum 5 yea

Job Description Rotating Machinery Services (RMS) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise—all backed by responsiveness in competitive prices and lead times. RMS’ commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. The Role The primary function of the Senior Sourcing Specialist is to purchase items in their assigned commodities to meet quality and delivery requirements as well as looking for potential saving opportunities. This individual should possess a background in procurement and materials management with experience in a mechanical production environment and have experience in sourcing: • Machining – All types Casing / Fabrications, • Fabrications - All types, • Airfoil Geometry blades (Machining, grinding, extrusions, forgings), • Balance and Over Speed Testing, • Contract Services, • Impeller Manufacturing – (Machining and Fabrications), • Coatings, plating, painting and shot peening, • Tooling manufacturing – Job related., • Turbine Services and parts to RMS prints ORGANIZATIONAL LEADERSHIP AND ORGANIZATION • Exceptional attention to details, • Display ownership and accountability for tasks and responsibilities, • Exceptional ability to manager competing priorities EXPERIENCE REQUIRED • Excellent interpersonal and vendor communication competence skills, • Excellent verbal and written communication skills, • Ability to work independently EXPERIENCE PREFERRED • Ability to manage other projects and responsibilities that may be added at the company’s discretion., • Exceptional ability to multitask, prioritize, and manage time and resources effectively., • Excellent time management skills with a proven ability to meet deadlines. Procurement, Manage Materials Delivery Supplier Quality & Cost • Implementation of cost saving strategies, • Evaluate and maintain supplier scorecards to meet RMS' objectives, policies and procedures, • Manage non-conformances and supplier chargebacks, • Perform supplier tooling inventory and reconcile tools that remain on site, • Initiate supplier improvement meetings to improve quality and manufacturability, • Attend new order kick off meetings, • Performs other related company duties as assigned, • Purchasing in a mechanical environment / Industrial environment, • Must be able to read and interpret engineered mechanical drawings, • Strong organizational, communication and computer skills required, • Proficient in the use of Microsoft Excel, Word Required, • Know how to create and review contracts, • JOBBOSS experience a plus, but not required, • Turbo Machinery, Steam turbines and centrifugal compressor experience, Highly recommended, • Quality costs aligned with business goals The above list of activities is not all inclusive but a general representation of the requirements of a RMS Senior Sourcing Specialist. This list is subject to changed based on the needs of the company. Required Qualifications: • Knowledge and experience with QMS principles and ISO 9001, • Excellent interpersonal and customer service skills, • Excellent verbal and written communication skills, • Procurement, Quality ISO & Approved Supplier List procedures, • Contract negotiations & Order placement, • Bachelor's degree or higher education in business or related field, • CPM Certification a plus, • 10 + years' experience in Purchasing, Materials Management and planning, • Strong experienced in procuring, expediting and managing contracts and schedules, • The position will be based in our Bethlehem, PA location or Houston, TX., • This is a full-time position, with a minimum expectation of 40+ hours per week. Additional Hours, including evenings or weekends may be required based on company needs., • Travel time expected to visit vendors as needed, 5% to 10%, • The position is required to be 100% onsite, • This position can be required to participate in the company random or customer specific drug and alcohol screening and background check., • Ability to act professionally under stressful situations., • Able to understand, read, write and speak English., • Ability to lift 30 lbs., • Must possess a valid driver’s license Office Environment on a regular basis. While performing the duties of this position, the employee may perform work in a shop environment and will be exposed to moving mechanical parts. While the work area may be described as generally clean, safe, and "not loud", there will be machining operations that generate moderate noise and metal particles.

Job Description We are looking for a Senior DataOps/Data Platform Administrator to manage and maintain our hybrid data ecosystem. This is a hands-on role focused on the stability, performance, and day-to-day operations of both our on-premises and cloud-based data tools. You will be the primary gatekeeper of our data infrastructure, ensuring that our systems —from Source to Delivery—are available, performant, and secure. Your goal is to manage the environment so effectively that our data engineers can focus entirely on building data products within a stable, secure framework. Primary Responsibilities On-Premises Administration (Denodo and SQL Server) • System Maintenance: Execute regular upgrades, patching, and configuration of VDP servers to ensure environment stability., • Operational Health: Monitor system uptime and manage environment-specific settings across Dev, QA, and Production., • Performance Tuning: Manage caching and resource allocation to maintain optimal query speeds for the business., • Access Control: Day-to-day management of Role-Based Access Control (RBAC), user provisioning, and security integrations., • Cost Management: Monitor Snowflake credit usage and Databricks consumption; manage resource monitors and alerting to prevent budget overages., • Environment Management: Manage deployments for Astro/Airflow, ensuring environment variables and secrets are correctly configured and updated., • Job Oversight: Monitor dbt Cloud job runs, manage environment configurations, and troubleshoot integration issues between dbt and Snowflake., • Operational Standards: Maintain the "guardrails"—security policies, naming conventions, and deployment standards—that keep the platform organized., • Documentation: Keep system documentation, environment diagrams, and administrative procedures up to date., • Experience: 5+ years in a Systems Admin, Database Admin (DBA), or DataOps role., • Denodo Admin: Practical experience managing on-prem Denodo with a focus on data delivery and performance tuning., • Cloud Admin: Strong administrative background in Snowflake (managing warehouses, roles, and usage) and familiarity with Databricks., • Tooling: Proficient in dbt Cloud, Fivetran, and Airflow. This is a critical "Specialist" position. You will own the health of a sophisticated, high-growth data stack. If you enjoy the challenge of managing a hybrid environment and take pride in building highly available, "bulletproof" systems, this is the role for you. SM Energy offers competitive compensation and benefits programs which include, but are not limited to, variable pay, health care coverage, retirement plan, protection coverage, time off and leave programs, training and development opportunities and a range of allowances connected to specific work situations. Details are available at Careers :: SM Energy Company (SM) (sm-energy.com). Applications will be accepted on an ongoing basis until the position is filled.

Job Description CNC Machinist Job Description The Machinist will be responsible for machining new and repair parts to print specifications. The primary focus will be operating a Toshiba VTL with Fanuc controls, featuring live tooling. This role involves working with large control flow valves, typically ranging from 40-60" in outer diameter, and occasionally reaching up to 160". The parts can weigh between 1,000 to 10,000 lbs. The Machinist will set up and operate the machine, making necessary edits and ensuring precision with tolerances down to ±0.001. The shop processes a variety of materials, including carbon steel, stainless steel, Inconel, and Stellite 1-6. Responsibilities • Operate a Toshiba VTL with Fanuc controls and live tooling., • Machine large control flow valves, ensuring precision to ±0.001., • Set up and operate machinery, making edits as necessary., • Handle parts weighing from 1,000 lbs to 10,000 lbs., • 5+ years of experience as a VTL Machinist., • 2+ years of Mill experience., • Proficiency with Fanuc controls., • Experience performing setups and edits., • Experience with Toshiba VTL, live tooling, and various control systems like Mazatrol and Tosnuc., • Ability to calculate speeds and feeds for milling and drilling., • Knowledge of G code programming, including G01, G17, G81, G90, G91, M03, M05, M02, M08, M09, and M00. This is a direct hire opportunity within a very large company known for its excellent work culture and climate-controlled environment. Employees benefit from good internal perks and the opportunity to work substantial overtime, creating a rewarding and engaging work atmosphere. Work Environment The position is based in a clean, air-conditioned shop. There are two shifts available: a night shift from 6pm-6am, Monday through Saturday, and a day shift from 6am-6pm. The schedule consists of 13 days on, followed by 1 day off. Job Type & Location This is a Permanent position based out of Houston, TX. Pay and Benefits The pay range for this position is $68000.00 - $94000.00/yr. Multiple health plans to choose from: HMO, PPO, and High Deductible Health Plans with a low-cost share Best-in-class 401K plan with zero vesting and up to 6% contribution matching 14-week maternity leave at full pay (Adoption benefits are equivalent) 4-week paternity leave at full pay (Adoption benefits are equivalent) Employee Resource Groups that offer community and support, like our Pride Network and Network of Women groups PTO, encompassing inclusive holidays Career Development opportunities Employer contribution for Health Savings Account, and in many cases free virtual telemedicine, and teletherapy. Mental Health and wellness programs to support you and your family Full suite of voluntary benefits to tap into, including but not limited to: Critical illness insurance, hospital indemnity, legal insurance, identity theft protection, and pet insurance or home & auto insurance through our discount advantage platform Short & long-term disability as well as basic life insurance at 2x your basic salary at no cost to the employee Free financial advisors, webinars, and classes through Charles Schwab Annual Employee Stock Purchase Plan with option to purchase shares at a reduced employee only price - no opportunity to lose, only to profit or refund your investment 100% Workplace Type This is a fully onsite position in Houston,TX. Application Deadline This position is anticipated to close on Mar 31, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionDiversified Sourcing Solutions is looking for CNC operators for one of our clients in North Houston. The CNC Operator is responsible for safely operating CNC equipment, maintaining product quality, and supporting manufacturing operations. This role requires strong attention to detail, adherence to safety and quality standards, and the ability to follow established procedures for machine setup, operation, and inspection. Health & Safety Responsibilities • Maintain safe operations by following all company safety procedures and regulations., • Keep the work area clean, organized, and free of hazards., • Understand CNC machine operation procedures and all parameters required to produce a quality product., • Set up CNC machines for production orders, including verifying settings, measuring positions, and inspecting firstrun parts., • Operate CNC machines according to established procedures and production standards., • Monitor machine performance and report any unresolved mechanical or operational issues to the Supervisor., • Ensure product quality by following CNC operation procedures and performing regular checks during production., • Measure, inspect, and record product parameters to confirm compliance with quality standards., • CNC Supervisor, • Team members within the CNC department, • High School Diploma or equivalentPreferred:, • 2 years of experience in a manufacturing environmentJob-Specific Skills:, • Ability to use gauges and measuring instruments, • Strong commitment to task completion and quality, • Clear and effective communication

Job DescriptionPlatform Engineer – Cloud Infrastructure & Automation (Houston, TX) Location: Houston, TX Work Arrangement: Hybrid Schedule: Normal business hours (8 AM – 5 PM), Full-Time Why Join Us? • Work on cutting-edge platform engineering projects that impact enterprise technology., • Collaborate with top engineers and developers in a fast-paced, innovative environment., • Enjoy career growth opportunities, competitive pay, and excellent benefits., • Design and implement infrastructure and platform solutions using Infrastructure as Code (IaC) principles., • Develop automation scripts and tools to optimize deployment and management., • Collaborate with developers and security teams to deliver enterprise-grade solutions., • Monitor system performance, security, and compliance., • Troubleshoot and resolve complex technical issues, including critical outages., • Respond to security incidents and implement remediation measures., • Support AI-assisted tooling and virtual SOC agent concepts., • Bachelor’s degree in Computer Science, Engineering, or related field (required).Experience:, • Minimum 3 years in infrastructure engineering, platform development, or related roles.Technical Skills:, • Base understanding of Terraform (training provided)., • Strong experience with Python for automation and scripting., • Familiarity with React and front-end frameworks (JavaScript/TypeScript experience preferred)., • Knowledge of cloud technologies, CI/CD pipelines, and automation tools., • Understanding of cybersecurity principles and vulnerability management.Preferred Certifications:, • Security+ or equivalent (not required but a plus).What We’re Looking For, • High performers who thrive in fast-paced environments and embrace continuous learning., • Ability to pivot to AI concepts and integrate AI-assisted tooling into workflows., • Strong communication, problem-solving, and collaboration skills.

Job DescriptionManager, Clinical Data Science & Data Products (Applied AI) Location: U.S. Remote (with optional hybrid in a major metro) Type: Full-time Level: Mid–Senior (people manager / player-coach) Beacon Talent is conducting a confidential search for a venture-backed company building an applied AI + data platform used in regulated healthcare environments. The company helps technical teams access, standardize, and validate complex clinical datasets so they can develop and evaluate AI responsibly. The Role You will lead a small team responsible for turning raw clinical data into analysis- and model-ready datasets that are reliable, well-documented, and usable by both internal teams and external partners. This role blends people leadership, hands-on technical work, and program ownership across multiple concurrent data initiatives. What You’ll Do Lead delivery of clinical data products * Own dataset buildouts end-to-end: intake → profiling → transformation → validation → packaging → release. * Translate ambiguous requests into clear scopes, success criteria, milestones, and delivery plans. Manage and grow a high-performing team * Coach, develop, and support a team of data scientists/analysts; set expectations and maintain quality bars. * Hire and onboard as the team scales; establish repeatable workflows (reviews, documentation standards, runbooks). Build scalable, harmonized data foundations * Design and maintain curated clinical data layers that support repeatable analytics and ML workflows (not one-off extracts). * Partner with Engineering to productionize pipelines and implement safeguards around quality, lineage, and access controls. Work across diverse healthcare sources * Investigate and operationalize new sources as they come online (e.g., EHR extracts, claims-like feeds, clinical text, imaging metadata, device/monitoring outputs). * Ensure data integrity through profiling, anomaly detection, reconciliation, and rigorous QA. Be a technical partner to customer-facing teams * Support stakeholder communication on delivery status, limitations, and data interpretation in a clear, accessible way. * Contribute to playbooks and reusable artifacts that make delivery faster over time. What Success Looks Like * Datasets ship on time with predictable quality, strong documentation, and minimal rework. * Your team runs a consistent process for intake, transformation, validation, and release. * Internal stakeholders trust the data layers as “source of truth” for downstream analysis and product development. Qualifications Required * Experience leading teams (formal or informal), with strong project management instincts in technical environments. * Deep hands-on experience with healthcare data (EHR, claims, registries, clinical research datasets, etc.). * Strong proficiency in SQL and at least one analytics language (typically Python). * Demonstrated ability to communicate both detailed technical tradeoffs and executive-level summaries. * Strong writing/documentation skills and a quality-first mindset in regulated data contexts. Nice to have * Familiarity with common health data standards/terminologies (e.g., FHIR/HL7 concepts, ICD/CPT/LOINC/SNOMED-style vocabularies). * Experience with modern transformation tooling (e.g., dbt-like workflows), version control, and cloud data stacks. * Exposure to clinical NLP, imaging (DICOM ecosystems), or common data models (e.g., OMOP-style structures). * Startup/early-stage experience where priorities shift and you build process as you go. Working Style & Logistics * Fast-paced, iterative environment; emphasis on learning, experimentation, and continuous improvement. * Occasional in-person team gatherings (typically quarterly). Compensation Competitive base + equity + benefits (details shared during the process).

Job Description Octagos is modernizing remote cardiac monitoring with AI-powered automation, seamless EHR integrations, and accuracy proven in high-volume, real-world clinics. Atlas AI™ triages cardiac device transmissions to filter nonactionable alerts and highlights the events that need true clinical attention. Through our Two-Brain Approach™ – combining Atlas AI™ with IBHRE-certified oversight – Octagos delivers 99%+ accuracy, sensitivity, and specificity for near-perfect clinical performance. With fast bi-directional EHR integrations, and flexible, cost-effective implementation, Octagos helps clinics scale care efficiently without compromise. Recognized by TIME and Statista as one of the World’s Top HealthTech Companies 2025, Octagos is redefining how cardiac care is delivered. We’re looking for a Sr. Tech Lead, Production Support to own the day-to-day health, stability, and incident resolution of the Octagos platform. This person will build and lead a production support team, establish processes for monitoring and triaging issues, and serve as the bridge between our clinics and engineering. You’ll be the first line of defense when something goes wrong, and the driving force behind making sure it doesn’t happen again. This role is ideal for someone who thrives in fast-paced environments, has a strong technical foundation, and brings operational rigor with a customer-first mindset. You’ll work closely with the VP of Engineering, Infrastructure, Security and the development team across the US and India, and our client success and clinical operations teams. This is an In-Office position based in Houston, Texas. Key Responsibilities Production Operations & Incident Management • Own the production support function end-to-end: monitoring, triage, escalation, resolution, and post-incident review, • Establish and enforce incident management processes including severity classification, SLAs, runbooks, and communication protocols, • Manage and respond to production incidents across the full stack: Angular portal, .NET API, SQL Server, Azure services, RPA bots, and EMR integrations, • Monitor platform health using Azure Application Insights, Log Analytics, and custom alerting; proactively identify issues before they reach clinics, • Build, hire, and manage a team of production support analysts and engineers, • Define on-call rotations, escalation paths, and shift coverage to ensure adequate support during business hours and critical after-hours windows, • Create and maintain a knowledge base of known issues, troubleshooting guides, and standard operating procedures, • Partner with engineering to identify and prioritize reliability improvements, tech debt reduction, and observability gaps, • Own the operational readiness process for new releases - review deployments, validate release notes, and confirm monitoring coverage before go-live, • Drive root cause analysis (RCA) for recurring production issues and ensure permanent fixes are tracked to completion, • Serve as the primary point of contact between client success, clinical operations, and engineering for production issues, • Triage and contextualize clinic-reported issues, distinguishing between platform bugs, configuration issues, data quality problems, and user error, • Coordinate with the RPA team on bot failures across vendor portals (Medtronic, Boston Scientific, St. Jude, Biotronik) and EMR push failures (Epic, Athena, NextGen, Cerner, etc.), • Leverage AI-assisted alert triage and log summarization to speed up incident identification, reduce noise, and improve time-to-detection, • Use AI to draft clear, stakeholder-ready incident updates and post-incident summaries while ensuring accuracy and appropriate clinical/operational context, • Apply AI-assisted root cause analysis workflows (pattern detection across traces, tickets, and recent deployments) to identify recurring failure modes and prioritize permanent fixes, • 10+ years in production support, site reliability, DevOps, or application support roles, with at least4years in a people management capacity, • Strong hands-on experience with Microsoft Azure (App Services, SQL Server, Application Insights, Log Analytics, Azure Functions), • Working knowledge of .NET/C# applications, SQL Server (T-SQL query analysis, execution plans, blocking/deadlock diagnosis), and web application architectures, • Experience building incident management processes from scratch or significantly improving existing ones, • Demonstrated ability to manage cross-functional escalations and communicate technical issues to non-technical stakeholders, • Comfortable working across US and international (India) engineering teams with overlapping time zones, • Experience in healthcare SaaS, clinical software, or HIPAA-regulated environments, • Familiarity with remote patient monitoring, medical device data, or cardiology workflows, • Experience with RPA platforms, Playwright-based automation, or web scraping bots in production, • Familiarity with EMR systems (Epic, Athena, NextGen, Cerner) and HL7/FHIR integration patterns, • Hands-on experience with Power BI, Hangfire, Auth0, or Azure DevOps pipelines, • Experience with observability tooling: Open Telemetry, Grafana, PagerDuty, or equivalent, • Paid Time Off, • Health, dental, and vision insurance, • Competitive salary commensurate with experience, • Opportunity to shape a critical function at a growing healthcare technology company

Job DescriptionSenior Product Manager, Life Sciences Data Products (Applied AI) Location: U.S. (Remote-first) with optional hub-based hybrid Employment: Full-time Level: Senior IC (high ownership) Start: ASAP / Flexible Beacon Talent is leading a confidential search for a venture-backed company building an applied AI + data platform that supports life sciences teams (biopharma, medtech, and research organizations) with secure access to real-world clinical datasets and tooling that accelerates discovery and development while maintaining high standards for privacy, quality, and responsible use. The Role As Senior Product Manager, Life Sciences Data Products, you will own the strategy and execution for a portfolio of data-driven products used by life sciences customers to find, access, evaluate, and operationalize complex clinical datasets for R&D and clinical development workflows. This is a hands-on, high-agency role—ideal for a PM who loves ambiguous problem spaces, can translate market signals into crisp product bets, and can partner deeply with engineering and data teams to ship scalable product capabilities. What You’ll Own * Product vision & roadmap: Define the life sciences product strategy, identify the highest-leverage problems, and translate them into a sequenced roadmap with measurable outcomes. * Discovery & validation: Run customer interviews, workflow mapping, and opportunity sizing to determine what to build, what to standardize, and what to avoid as one-off services. * Scalable data products: Build repeatable “productized” capabilities that improve dataset usability, governance, search/retrieval, cohort building, and downstream analytics readiness. * AI-assisted workflows: Partner with technical teams to design automation that reduces friction in data access and analysis (e.g., metadata enrichment, quality signals, dataset packaging, evaluation tooling). * Execution leadership: Write requirements, define success metrics, manage tradeoffs, and drive delivery from concept through launch—iterating based on usage and customer outcomes. * Cross-functional alignment: Collaborate closely with go-to-market partners to ensure positioning, packaging, and feedback loops inform the roadmap without turning the product into custom projects. * Market awareness: Stay current on life sciences R&D and clinical development trends and incorporate them into differentiation and product choices. What We’re Looking For Required * 5+ years building data products or platforms for life sciences and/or healthcare customers. * Strong product discovery muscle: customer interviews, problem framing, prioritization, and roadmap ownership. * Technical fluency across data infrastructure, APIs, pipelines, and working concepts in ML-enabled products (no need to code). * Track record partnering with engineering and data teams to deliver complex, high-impact product work. * Excellent communication—credible with technical teams and clear with non-technical stakeholders. * Comfort operating in a fast-moving environment with evolving inputs and limited process. Nice to have * 0→1 product experience or taking early products to scale in a regulated domain. * UX/product design sensibility with strong intuition for end-user workflows. * Prior experience in analytics, data science, or experimentation. * Familiarity with privacy, governance, and quality frameworks for sensitive datasets. Why This Role * Direct ownership of a high-impact roadmap at the intersection of life sciences + data platforms + applied AI * Meaningful influence over what becomes productized vs. service-heavy * Close collaboration with technical leadership and high visibility across the company Compensation Competitive base + equity + benefits. (Exact range varies by level and location and will be shared during the process.)

Job DescriptionSUMMARY OF ESSENCIAL FUNCTIONS This position requires expertise and proficiency to effectively perform the assembly and/or inspection of various types of seals, labyrinth seals, journal/thrust bearings, and component parts for high-speed rotating equipment to print with minimal supervision. This position requires proficiency with all the necessary metrology instruments. The ability and proficiency to identify and complete all documentation accurately, ability to perform math manually during inspections, and the ability to be able to switch between jobs quickly. SPECIFIC DUTIES, ACTIVITIES, AND RESPOSIBILITIES INCLUDE BUT ARE NOT LIMITED TO: * • Read and interpret dimensions, flag notes, process requirements, standards, material call outs, or other pertinent specifications from engineered drawings or sketches to certify that assembly/part tolerances, surface finishes, and visual conditions are per the drawings., • Work from work order routings, prints, sketches, layout sheets, written and/or verbal instructions., • Using mechanical ability to plan assembly sequences and execute to meet the requirements as specified on the assembly drawing., • Inspect products, parts, components, sub-assemblies, or assemblies using precision measuring equipment such as inside, outside or depth micrometers, calipers, height gages, or other measuring instruments, volt/ohm meters, gauss meters, gages, or mandrels to verify conformance to specifications as low as .0005” tolerances., • Utilize a variety of instruments to verify all dimensions, hole/feature locations, surface relationships, finishes, coatings, or processes to ensure compliance., • Perform as required, in-process, final, and/or trouble-shooting inspection on all component parts received from outside vendor sources or manufactured in-house., • Working knowledge of unique properties for a variety of materials such as stainless steel, alloy steel, cast iron, brass, thermoplastics, exotics or other as required., • Prepare inspection reports, customer requested documentation, nonconforming material reports, or other documentation as required to ensure conformance., • All work performed must meet the work order estimated time and delivery date from our ERP system., • Keep the tools/work area clean and orderly in compliance with shop protocol., • Perform duties in accordance with company safety policies and report any unsafe conditions to the supervisor., • At times it may require light machining, grinding, polishing, and/or deburring using basic hand tools on product components., • Perform additional duties and responsibilities, as necessary, as directed by your supervisor(s)., • Multitask by keeping track of multiple parts/jobs, being able to switch jobs quickly based off the company/customer needs and completing assignments despite frequent interruptions., • Must be able to recognize and understand some of the functions of the machining process as they pertain to finished part features, holding and tooling methods utilized during manufacturing., • Knowledgeable in the principles used in quality assurance, such as ISO 9001, etc., • Must have the ability to utilize mathematical calculations required to perform normal duties., • Work independently and should be able to manage time effectively to complete jobs in a timely manner., • Must have an analytical ability to solve problems and resolve technical problems., • May perform calibration duties that include but are not limited to logs, tracking, in-house/vendor calibration, and tooling adjustments., • NDT experience or training may be required. EHS REQUIREMENTS • Complete all work in a safe manner and follow all safety requirements consistently by supporting the EHS procedures., • Lifting guidelines in accordance with the EHS procedures., • Follow all environmental requirements consistently by supporting the EHS procedures., • High school diploma or equivalent required with some technical school education., • Minimum 4 years previous work experience in related work with solid understanding and use of basic metrology tools and techniques., • Working knowledge of assembly and inspection tools, instruments, techniques, and processes., • Ability to read and interpret work related to machine drawings such as detail, assembly, and layout drawings., • Must be able to maneuver parts, carts, and/or boxes weighing up to 50 pounds., • Must be able to sit or stand for extended periods of time; a minimum of 2 hours., • Must be able to maneuver all areas of the Miba locations., • Must be able to bend, reach, kneel, twist, and grip items while working at assigned areas., • Must have manual dexterity and coordination to operate office equipment, calculators, PC’s, cameras, and copy machines., • Must be able to simultaneously manage several objectives, complete assignments and reassign priorities., • Must be able to read, write, speak, and understand English., • Must be able to respond to visual and aural cues. Powered by JazzHR nAmtsAH1GD

Job Description Overview The Tyndale Company is seeking a Platform Engineer to join our dynamic IT department. The Platform Engineer (Developer Enablement) acts as a senior technical contributor focused on accelerating software development through standardization, automation, and shared tooling. This role improves how developers write, structure, and maintain code—driving consistency, quality, and throughput across all teams. Operating between development, DevOps, QA, and architecture, the Platform Engineer defines and maintains internal frameworks, reusable components, and automated guardrails that enforce Tyndale’s engineering standards. HYBRID/REMOTE: Tyndale supports a strong work-life balance. This opportunity requires onsite work a minimum of 1 day per week, and 4 days per week remotely. To be considered, candidates must reside within a commutable distance from our corporate headquarters in Pipersville, PA (Bucks County) or our location in Houston, TX (City Centre). About Tyndale The Tyndale Company is a private, 9x Top Workplace winner in PA and 5x winner in TX, and an industry leading national supplier of arc-rated flame-resistant clothing (FRC) to the energy sector – including utilities, oil and gas, transportation, chemical manufacturing, and NFPA 70E markets. We’re a family-owned business providing a retail-style apparel experience to hundreds of thousands of energy workers across the US and Canada. We’re the leading distributor of innovative FRC solutions, and the largest industrial supplier of Carhartt FR, Ariat FR, and Wrangler FR clothing. Responsibilities Framework and Tooling Development • Design and maintain internal libraries, NuGet packages, and reusable UI components for consistent logging, error handling, validation, and security., • Develop service templates, scaffolding, and code generators that accelerate application startup and reduce boilerplate., • Manage and evolve shared frameworks for observability, authentication, and health checks. Code Quality and Standards Enforcement • Define and enforce coding, naming, and validation standards through SonarQube rules, lint configurations, and automated pipeline gates., • Partner with the Production Control Lead to align service standards and release readiness checks with coding guardrails., • Establish patterns for consistent exception handling, structured logging, and telemetry across systems. Developer Experience and Productivity • Build internal tools and automation that improve daily developer efficiency (template creation, dependency scanning, project setup)., • Create documentation and onboarding materials to promote the “golden path” for new services., • Participate in and review cross-cutting code to ensure adherence to architectural and quality standards. Collaboration and Mentorship • Serve as a coach and technical mentor to developers, promoting shared learning and consistent implementation practices., • Work with DevOps, QA, and architecture to ensure cross-team compatibility and efficient delivery. Qualifications • Minimum of 10 years of software engineering experience with at least 3 years focused on frameworks, tooling, or developer productivity., • Bachelor’s degree in computer science or related field, or equivalent technical training., • Strong experience in C# and .NET application architecture., • Experience developing shared internal libraries, NuGet packages, and CI/CD pipeline integrations., • Familiarity with SonarQube, code analysis tools, and coding standard enforcement., • Experience automating scaffolding, code generation, or development environment setup preferred., • Strong understanding of logging, telemetry, and observability best practices., • Experience with Dynatrace, Serrilog, Microsoft Orleans, and Temporal preferred, • Familiarity with front-end component reuse (Angular, Blazor, or similar) a plus., • Self-motivated, detail-oriented, and capable of influencing cross-team engineering practices. Benefits • Health & Wellness: Comprehensive medical, dental, and vision insurance with competitive premiums. Paid parental leave. Mental health support through an EAP and partial reimbursement on copays, fertility support, and robust wellness programs with annual reimbursements., • Work-Life Balance: Many positions with Tyndale offer hybrid onsite + remote work schedules, generous PTO, paid holidays + a floating holiday, and more., • Financial Compensation: Competitive salary, 401(k) with matching, and bonus opportunities., • Career Growth & Development: Training/certification/tuition reimbursement programs and demonstrated paths for knowledge share and internal promotion opportunity., • Culture & Perks: Family-owned values, award winning culture, team-engagement events, casual dress code, company-sponsored charitable events and activities, and an inclusive workplace that values collaboration and integrity. Qualified candidates are encouraged to apply on our website, . E.O.E #LI-SP1 #LI-Hybrid

Job Description Supreme Integrated Technology is looking for candidates who want to take the next step in their career to join our 100% employee owned company. SIT’s engineering expertise transforms ideas into success for hydraulic and electric powered moveable structures. SIT specializes in custom systems and projects, making every project unique and offering the opportunity to solve challenge problems for customers. Our projects are typically for defense, marine, oil & gas, civil (movable bridges) and industrial power unit applications. We pride ourselves on a culture of teamwork – because we are a smaller company you have opportunity to be involved in every aspect of a project and make an impact from start to finish. Apply early for an opportunity to schedule a virtual interview with our team! We will be hosting these virtual interviews this fall. The Campus Ambassador Program provides for interns to be hired by EOHI and its subsidiaries and work at the different office locations during the summer. Through hands-on experience and meaningful projects, interns see what it’s like to work for our employee-owned company and present their final projects to top leadership. Supreme Integrated Technology's program allows interns to follow an engineering track depending on their desired career paths. Specific Responsibilities • Assist Engineering with drawings., • Assist Sales Department with calculations, sizing and specifications., • Prepare Shop Manufacturing drawings., • Prepare layouts and various drawings of parts and assemblies using conventional and limited CAD techniques and a working knowledge of the terms and procedures requiring the use of mathematical formulas to compute weights, dimensions, quantities of materials, etc., • Assist with final sketches checking dimensions of parts, materials to be used, relationships of one part to another, and relationship of various parts to whole structure or project., • Work from sketches, customer drawings, actual visual review, and verbal information supplied by an engineer or designer and determine the appropriate views, detail drawings, and supplementary information needed to complete assignments., • Assist with charts and graphs including flow charts, uv-graphs, tables, technical illustrations, and paste up work to depict parts for clarity and dimensional purposes., • Research and analyze data such as customer design proposal, specifications, and manuals to determine feasibility of design or application., • Design products and systems to interface machines, hardware, and software., • Evaluate tooling and recommend design modifications to eliminate production downtime., • Support and participate in the organization’s continual improvement program to conform to ISO 9001 requirements by complying with the Quality Policy and procedures and meeting QMS objectives. Education: • Must be currently enrolled in an accredited undergraduate degree program, Mechanical Engineering preferred., • Prefer GPA of 3.0 or higher., • Ability to work independently and eager to take on responsibilities., • Working knowledge of Microsoft office (Word, Excel, PowerPoint), • Experience with AutoCAD and SOLIDWORKS design a plus., • Hands-on mechanical aptitude a plus., • Strong organizational and time management skills., • Analytical, problem-solving and conceptual thinking skills., • Excellent communication skills (including oral, written, and relationship building). As contracts with the U.S. government have required this position to be held by a U.S. citizen, please confirm status as a U.S. citizen. Benefits We offer a competitive salary and benefits package, including medical, dental, vision, life and disability insurance, and 401(k) plans with company match. A unique benefit SIT offers as part of Employee Owned Holdings, Inc. is an employee stock ownership plan. What is an ESOP? ESOP is a special retirement program that allows employees to own stock in the company. When you join EOHI, you automatically begin investing in your future (without having to purchase shares). We are a high growth company committed to training our employee owners to develop their skills and advance in their careers. • Studies also show that retirement account balances for ESOP companies are 2.5 times higher., • ESOP companies grow 2.5 times faster than those companies without employee ownership., • Research shows employee owned companies are superior in performance, employee benefits and employee morale because everyone is working towards a common goal.

Job Description About The Role The .NET Developer will work within the IT Software Development team on one of two product-aligned squads (Customer-Facing Applications or CPQ/Internal Business Applications), building and maintaining applications that power Perry Homes’ sales, construction, pricing, and homebuyer-facing operations. Using discretion and independent judgment, the Developer will design, build, and maintain .NET backend services and JavaScript-based frontend interfaces that directly support business operations and ensure the Company’s systems operate without interruption. What You’ll Do • Design, develop, test, and deploy features using C#/.NET (ASP.NET Core, Entity Framework) for backend services and JavaScript/TypeScript (React, Angular, or Vue) for frontend interfaces., • Build and maintain RESTful APIs, business logic layers, and data access components that integrate with SQL Server databases., • Use Cursor as the primary development environment for all assigned work, leveraging AI-assisted code generation, refactoring, and test creation throughout the development process., • Consume AI-structured PRDs and ERDs provided by Business Systems Analysts as context for Cursor-driven development, and provide feedback on context quality., • Contribute to the team’s AI development practices by sharing effective prompt patterns, identifying productivity gains, and flagging areas where AI tooling falls short., • Troubleshoot and resolve production issues promptly, conducting root cause analysis and implementing durable fixes across both frontend and backend layers., • Work closely with the Team Lead and Business Systems Analyst to refine requirements and ensure stories are development-ready before sprint commitment., • Proactively identify and propose solutions for technical debt, performance bottlenecks, and architectural improvements., • Participate in AI adoption training sessions and maintain Cursor usage targets established by the Director and AI Enablement Engineer. What We’re Looking For • Bachelor’s degree in CS, Software Engineering, IT, or related field. Equivalent professional experience considered., • 3–5 years of professional software development experience with C#/.NET as the primary backend technology., • Proficiency in ASP.NET Core or ASP.NET MVC, Entity Framework, and RESTful API design., • Solid experience building frontend interfaces using JavaScript or TypeScript with at least one modern framework (React, Angular, or Vue)., • Demonstrated, regular use of AI-assisted development tools (Cursor strongly preferred; GitHub Copilot or equivalent accepted) in a professional setting. Candidates should be prepared to demonstrate their AI-assisted workflow in a live coding exercise., • Strong communication skills with the ability to collaborate with Product Owners, Business Analysts, and team members., • Ability to gather and interpret business requirements and develop applications with minimal supervision. Why You Will Love Working Here • Competitive compensation and benefits package:, • Medical, dental, vision coverage, • Financial Planning, • Time Off & Life Balance, • Family & Lifestyle, • Opportunities for growth and development, • Culture that is collaborative, inclusive, fast-paced, people-first, • Stable company with strong reputation in the market Why Join Perry Homes? At Perry Homes, we’re committed to integrity, excellence, and service—values that guide every customer interaction. Join a team where your work directly contributes to an exceptional homebuying experience and a trusted brand. We’re committed to creating an inclusive workplace where people can do their best work. Benefits Health & Wellness • Medical, Dental & Vision Coverage, • Employee Assistance Program (EAP), • 401(k) with Company Match, • Company-Paid Life & Disability Insurance, • PTO & Paid Holidays, • Perry Homes Family College Fund, • New Home & Employee Discounts, • Pet Perks, Travel Assistance, & More Perry Homes is an Equal Opportunity Employer Disclaimer: Recruitment Fraud – Any communication regarding job opportunities from our organization will be initiated through official channels only, including our company email domain, @perryhomes.com and verified social media accounts. We advise candidates to exercise caution and refrain from sharing personal or sensitive information with any party claiming to represent our company outside of these channels. We do not at any early stage of recruitment process solicit personal information (e.g., passport and bank account info), financial details, or any form of payment (e.g., application fee). If you receive suspicious communications, encounter job postings that appear fraudulent, or want to confirm any employment postings, please contact .

Job Description Company Overview At Allia Health Group, the umbrella organization for Southend Pharmacy, Brello Health, and Woven, we don’t just follow industry trends—we redefine them. Our mission is to commoditize anti-aging solutions, making them affordable and accessible to the average consumer—not just the wealthy. By offering customized and cost-effective wellness products that follow cost-containment models, we aim to improve people’s quality of life and meet them wherever they are on their health journey. Key Responsibilities * Set the clinical vision and standards of care across men’s health, women’s health, and longevity * Establish clear clinical decision rights and governance mechanisms across Allia Care and subsidiaries * Own the clinical operating system including coverage models, clinician supply/demand planning, and operational KPIs * Design safety-first throughput guardrails to maintain clinical quality during growth * Build and run a telehealth-native Quality & Patient Safety program * Build and lead a high-performing clinician organization including recruiting, training, and supervision * Serve as executive owner of clinical product strategy for the in-house EHR and clinical tooling * Own clinical due diligence for new programs and treatments * Own the clinical compliance posture in partnership with Legal and Compliance * Maintain safe prescriber-to-pharmacy workflows for medications fulfilled through the pharmacy subsidiary What We Require * MD or DO from an accredited institution with an active, unrestricted U.S. medical license * Board certified in Internal Medicine, Family Medicine, OB/GYN, Urology, or related specialty * 10+ years of clinical experience, including 5+ years in senior clinical leadership (e.g., Medical Director, VP Medical Affairs, CMO) * Proven experience leading clinical operations, quality, and patient safety programs in a telehealth or tech-enabled care environment * Experience managing provider performance, peer review, and clinical governance frameworks * Strong knowledge of U.S. healthcare regulations (HIPAA, state medical boards, telehealth, prescribing compliance) * Demonstrated ability to partner cross-functionally with Product, Engineering, Operations, and Compliance teams * Experience working with EHR systems and clinical technology platforms (e.g., Epic, Athenahealth, eClinicalWorks, or proprietary systems) * Experience with telehealth platforms and virtual care delivery models Preferred Requirement * Prior experience as a Chief Medical Officer or equivalent in a digital health or multi-entity organization * Experience scaling clinical operations in high-volume environments (10K+ patients/month) * Experience building or influencing EHR systems, clinical workflows, and decision support tools * Experience managing multi-state provider networks, including 1099 clinicians * Familiarity with pharmacy-integrated care models, including medication safety and 503A environments * Experience with healthcare analytics and reporting tools (e.g., Tableau, Power BI, Looker) What We Offer * Full benefits package including medical, vision, dental, 401(k) with company match, PTO, Flex days, holidays, and more! Allia Health Group does not provide employment visa sponsorship now or in the future. Applicants must be legally authorized to work in the United States without the need for current or future sponsorship. Equal Opportunity Employer Statement Allia Health Group is proud to be an Equal Opportunity Employer where we are committed to fostering a diverse and inclusive workplace. We are committed to cultivating a culture where all team members feel valued & respected. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity or expression, sexual orientation, national origin, genetic information, disability, age, veteran status, or any other characteristics protected by applicable law. If you have any questions or require immediate assistance or accommodations during the application or interview process, please contact us at .

Job DescriptionMain Function: • EQUIPMENT SELECTION: The Test Engineer Assistant will be responsible for specifying Machine type, expected throughput, expected yields and the required equipment manning. This will involve close liaison with the customer to understand the customer needs and requirements which may include customer specific Test Equipment and Fixtures., • EQUIPMENT PERFORMANCE: The Test Engineer Assistant will be responsible for ensuring that in a volume manufacturing environment that all manufacturing equipment performs as per supplier's specifications and within the requirements of the quotation. This is to say, that all targets can be met, that machines perform as per forecast and that yields, and quality targets are achieved., • TESTER MAINTENANCE: The Test Engineer Assistant will be responsible for all ongoing equipment maintenance which will include all planned preventative maintenance schedules, line support for breakdowns and major machine overhaul activity. The Test Engineer Assistant will also be responsible for the forecasting, stocking and ordering of spare parts and consumables required for Test Equipment and Fixtures maintenance.Duties and Responsibilities:, • EQUIPMENT SELECTION: When new products are introduced to the facility the Test Engineer Assistant will be responsible for the design of the Test Process, in conjunction with input from the Product Engineer. This will involve specifying the correct types and quantity of Testers and wherever required introducing new technologies for a customer’s specific product., • NEW PRODUCT INTRODUCTION: During the introduction of new products, the Test Engineer Assistant will have start up responsibilities to ensure that Test process operates as designed. This will include proving Throughputs and Yields and also agreeing the Manufacturing Handover process for volume production., • QUALITY: The Test Engineer Assistant will work with the Quality group to establish the Quality plans on a product-by-product basis. During the normal course of production, the Test Engineer Assistant will be required to be involved with the Quality group on an on-going basis for the resolution of Tester/ Software / Process problems that will arise., • TEAMWORK: During all of the manufacturing activities the Test Engineer Assistant will be required to co-operate with all departments within the Facility and will be required to act a pro-active team member, taking a lead role on all Test related issues., • DOCUMENTATION: The Test Engineer Assistant will be responsible for providing all process documentation and Test Programs for production build. This will include ensuring that the Test and Fixture pin out listings that are to be used in manufacturing are accurate to the current build level., • ECN ACTIVITY: The Test Engineer Assistant will be responsible for participating during the Change Control Meetings, where both internal and customer ECN’s will be actioned. Subsequent to that meeting the Test Engineer Assistant will be responsible for implementing such changes into the Test processes., • TEST EQUIPMENT: The Test Engineer Assistant will be responsible for all major Test equipment movements and installations. Also, for the negotiation and provision of all third-party service contracts for Testers used within the Facility. The Test Engineer Assistant will also be responsible for maintaining the appropriate level of spares and consumables for both Testers and Fixtures., • QUOTATIONS / TOOLING: During the quotations process the Test Engineer Assistant will be required to specify and order Test Fixtures required for the Test Process when a new customer is introduced. The Test Engineer Assistant may also be required to specify other non-recurring expenses during this process that will be required to be charged back to the customer., • MEASUREMENTS: The Test Engineer Assistant will be Measured on the following Categories:, • TEST YIELDS, • FALSE FAILURE RATE, • TEST SYSTEM UP and DOWN TIME, • ON TIME DELIVERY FULFILMENT, • SPARES INVENTORY and MaintenanceThe Test Engineer assistant will be responsible for setting up a measure process for the above that will be reported on a weekly Basis., • CUSTOMER FOCUS: The Test Engineer Assistant must recognize their importance in providing Customer Satisfaction, to both Internal and External Customers and must act to provide the best Quality Products, Services and Communication to these Customers.Qualification and Experience:, • Relevant IT education, • Strong PC and network operation and installation skills, • Windows and Linux installation and operation knowledge, • Intermediate English (written and spoken), • 1 year experience in a relevant IT field, • Strong MS office user skillPrimary Skills:, • Communication skills., • Mathematical, analytical skills., • Visual thinking., • Adaptability skills., • Independent work., • Problem solving., • Logical skills., • High Endurance.Secondary Skills:, • Relevant College or University, • Good verbal skills, • IT systems / networks GaKSdnloL4

Job DescriptionTitle: Mechanical Design Engineer – Remote Handling & Reactor Servicing Location: Full-Time Remote (Contiguous U.S.) Hire Type: Direct Hire Shift/Hours: Monday–Friday, standard business hours Base Salary: $110,000 – $150,000 (DOE) Benefits: Medical, Dental, Vision; PTO; 401(k); Paid Holidays; Career Growth Opportunities About the OpportunityAn advanced nuclear technology organization is seeking a Mechanical Design Engineer to support the design and development of remote handling systems, reactor servicing tools, and automated inspection equipment used during reactor refueling operations.This role focuses on mechanical handling systems, robotics/automation integration, and tooling design within a highly regulated nuclear environment. The ideal candidate will bring strong mechanical design experience, cross-functional collaboration skills, and a commitment to nuclear safety and quality standards. Job Duties• Design and develop reactor servicing tools, remote handling equipment, and inspection systems. • Prepare and review engineering calculations, drawings, specifications, and technical documentation., • Collaborate with component design, civil/structural, systems engineering, and operations teams to ensure interface and performance requirements are met., • Develop integrated handling plans and work sequences for refueling operations., • Support procurement, fabrication oversight, vendor coordination, and equipment testing activities., • Ensure compliance with nuclear quality standards (10 CFR 50 Appendix B, 10 CFR 21, NQA-1)., • Provide innovative solutions to complex mechanical design and automation challenges., • 5+ years of professional engineering experience in mechanical system design., • Experience designing mechanical handling equipment, tooling systems, or automated machinery., • Experience preparing and reviewing engineering calculations and design documentation., • Nuclear industry experience strongly preferred., • PE license preferred.

Job Description DESCRIPTION: (Including but not limited to) Working within a team environment, the Blast Operator position is responsible for the blasting duties centered on ensuring parts to be coated are cleaned and prepped by customer specifications as contained within the work order. KEY FUNCTIONS • Will operate in machine blast operations, forcing abrasive material onto a component's surface through a nozzle., • Loads parts into sandblast equipment, maintains adequate supply of blast sand in hopper., • Configure and run blast machines in accordance with the customer’s specifications., • Collect materials, tooling, and blast products prior to initiating operation., • Use hand tools to repair, clean, and adjust equipment., • Comply with all company policies and procedures including Health, Safety and Quality Assurance policies., • Checks work visually, makes minor decisions; detects and reports defective items and unusual conditions to proper supervision., • Sand blasts parts following established methods and procedures to remove surface contaminants and imparts proper surface finish. WORK QUALIFICATIONS: Required: • A minimum of two (2) years of experience in a manufacturing or warehouse facility, • Proven proficiency in fundamental shop math, including handling fractions and decimals, • Proficient in the use of hand and power tools for successful job performance, • Ability to work in a team environment and effectively communicate, • Ability to follow directions and procedures, • 2-5 years of Industrial Gas Turbine Repair experience Required: HS diploma or GED WORK ENVIRONMENT: Reasonable accommodation may be made to enable qualified individuals with disabilities to perform essential functions. • Willingness to work a flexible schedule to meet the demands of the role., • Must be able to sit, stand and walk for long periods of time or until the end of the assigned shift. ADA JOB REQUIREMENTS: Reasonable accommodations will be made to ensure that the essential functions of the job can be performed and not hinder the employee's performance due to physical, mental, or emotional disability. EQUAL EMPLOYMENT OPPORTUNITY: Allied Power Group is an equal opportunity workplace. All employment decisions are made without regard to sex, race, color, religion, national origin, citizenship, age, disability, marital or veteran status, sexual orientation, gender identity or expression, or any other legally protected categories. This includes providing reasonable accommodation if requested for disabilities or religious beliefs and practices.

Job Description STAR PIPE PRODUCTS Job Summary: We are seeking a skilled Mazak CNC Machine Operator to set up, operate, and monitor Mazak CNC machines to produce precision metal components. The ideal candidate will be responsible for ensuring parts meet quality standards, maintaining safe work practices, and supporting efficient production. Key Responsibilities: • Set up and operate Mazak CNC machines (including turning and/or milling centers), • Load and unload raw materials and finished parts, • Interpret blueprints, technical drawings, and work instructions, • Select and install appropriate tooling, fixtures, and offsets, • Monitor machine operations and make minor program or offset adjustments as needed, • Inspect finished parts using measuring tools such as calipers, micrometers, and gauges, • Perform routine machine maintenance and keep machines clean, • Identify and report defects, machine issues, or safety concerns, • Maintain accurate production and inspection records, • Follow all safety and quality standards Required Skills and Qualifications: • Experience operating Mazak CNC machines and knowledge of CNC programming (Mazatrol preferred), • Ability to read blueprints and GD&T symbols, • Familiarity with precision measuring instruments, • Strong attention to detail and problem-solving skills, • Ability to work independently or as part of a team Preferred Qualifications: • Certificate or diploma in CNC machining or manufacturing technology, • Experience with Mazatrol and G-code programming, • Knowledge of metal cutting tools and machining processes, • Min 5+ years of previous experience in a production or job-shop environment Work Environment: • Manufacturing shop floor, • Standing for extended periods, • May require lifting materials up to 15lbs Schedule: • Full-time | Shift work may be required Compensation: • Competitive pay based on experience ($25-$28/hr), • Benefits package available Star Pipe Products is an Equal Opportunity Employer Company DescriptionWe are the proud owner of a U.S.A. foundry situated in South Coffeyville, Oklahoma. Star® Pipe Products is a domestic & global manufacturer for a broad array of iron products for the water and wastewater industries. Established in 1981, Star® Pipe Products is headquartered in Houston, Texas, and has been delivering quality products and services for over 40 years.We are the proud owner of a U.S.A. foundry situated in South Coffeyville, Oklahoma. Star® Pipe Products is a domestic & global manufacturer for a broad array of iron products for the water and wastewater industries. Established in 1981, Star® Pipe Products is headquartered in Houston, Texas, and has been delivering quality products and services for over 40 years.

Job Description METECS is an engineering and applied technology company that provides high-fidelity simulation and software development for NASA’s Johnson Space Center. We are seeking a Network Engineer to support the NASA human spaceflight program Artemis via the Artemis Network Validation and Integration Lab (ANVIL). As a team member in this lab, you would participate in the early development, integration, and validation of the Gateway vehicle network architecture and contribute to expanding the lab capability as the Gateway vehicle design matures. Responsibilities: • Developing and testing visiting vehicle concepts and interfaces., • Demonstrating Time Triggered Ethernet operational concepts and incorporating. commercial network interfaces with Gateway network., • Exercising Gateway operational scenarios to mature TTE network scheduling. capabilities including support for utilization and security., • Supporting development testing for utilization of Gateway TTE network for end. devices, such as audio, video, Gateway Portable Computers, wireless access points., • Bachelor's or advanced degree in Computer Science, Electrical Engineering, Computer Engineering, or equivalent experience., • Strong background in computer networking technology, software, and protocols., • Experience in network design and network administration., • Proficiency in Python programming., • Experience with Linux operating systems., • Ability to develop software and scripting solutions., • Knowledge of socket programming., • Knowledge of computer networking technology, design, management, tooling, security, and troubleshooting techniques., • Experience with real-time embedded programming using C/C++., • Familiarity with VxWorks RTOS., • Experience with SAE AS 6802 Time Triggered Standard IEEE 802.3 (Ethernet). standards, ARINC 664 Part 7 Aircraft Data Network – Full-Duplex Switched Ethernet. Networks, Internet Protocol Suite (IPS), and hardware cabling standards. Citizenship or lawful permanent resident required due to federal position. About METECS: We are a high-performance team providing advanced engineering, software, and analysis solutions for human space flight and terrestrial applications. We develop and integrate custom software for NASA and other government and commercial customers utilizing a wide variety of in-house, commercial, and open-source technologies. Our specialties include robotics automation, embedded systems, hardware/software integration, multibody dynamics simulations, immersive computer graphics, XR systems and advanced web-based tools. METECS is an Equal Opportunity Employer, including veterans and individuals with disabilities. Powered by JazzHR KXV3g3MT6f

Job DescriptionDescription: Job Responsibilities: • Responsible for reviewing new projects and working with customer and internal team to review product design, production feasibility, mold design feasibility and to establish inspection requirements for all parts., • Works to properly document and maintain Master Control Plans (MCP) and is responsible for Program Review Meetings and successful launch from sales order through design through tooling design and build and into production., • Responsible for all company product design reviews and outsourced prototyping, • Responsible for managing mold design and building of all new tooling, molds including repairs and ecn's., • Responsible for making sure new projects costs are in line with quotes and meet minimum margin levels., • Responsible for Engineering Change Notice (ECN) process and insuring we have the latest revision documents during the preproduction phase prior to turning over to Quality., • Responsible for complete and accurate BOM for all parts utilizing company ERP system, • Responsible to insure all programs are completed on time and within budget., • Responsible for ensuring that First Article Reports, Customer Approval Forms, customer samples, PPAP are done professionally and meet criteria as set by TX-IM and our customers., • Responsible for providing technical support to Quality for NCR and CR actions including help driving root cause analysis and corrective actions for internal quality problems or customer complaints., • Establishes, implements and audits company injection mold preventative maintenance program, • Maintain engineering area, safety and 5S housekeeping. Requirements: Education: • 4 year college degree or related work experience Knowledge/Skills and Abilities: • Knowledge and Understanding of Injection Molding preferred, • Understanding of plastic design standards, preferred, • Basic skills in CAD design software, preferably Solidworks, preferred, • Proficient in Microsoft Office, • Understanding and ability to become proficient utilizing ERP software, • Good interpersonal skills both written and verbal, • Proficient in the ability to read and interpret part drawings, preferred, • Ability to work independently and handle projects to completion, • Ability to oversee and drive projects to profitable completion into production, • Must be neat, organized and able to meet commitments

Job DescriptionJob Summary The SMT Engineer is responsible for supporting day-to-day Surface Mount Technology & Underfill line execution by monitoring production progress, driving KPI performance, and coordinating cross-functional resources to remove bottlenecks. This role ensures stable output, quality, cost, and delivery performance through hands-on shopfloor management, frontline operator leadership, rapid problem-solving, and timely communication and escalation to management Key Responsibilities Production & Operations Management • Monitor real-time production status, output, and WIP to ensure schedule attainment and on-time delivery., • Track key shopfloor indicators such as throughput, cycle time, downtime, and bottleneck stations; initiate recovery actions when gaps are identified., • Maintain daily production dashboards and ensure data accuracy in ERP/MES systems., • Identify production constraints (manpower, material, equipment, quality holds, test capacity) and drive timely resolution., • Coordinate with Planning, Quality, Engineering, Maintenance, and Logistics teams to secure resources and restore line flow., • Support escalation management with clear problem statements, containment actions, and recovery plans., • Manage daily assembly line execution, including line balance, station readiness, and staffing allocation to meet output targets., • Ensure work instructions, tooling, and fixtures are available and correctly used at the line., • Support quick response to abnormal events (line stops, defects, material shortages) to minimize production impact.People Leadership & Team Development, • Provide on-floor guidance to operators and line leaders to reinforce standard work, safety practices, and quality requirements., • Assist with operator onboarding, cross-training, and skill matrix updates to improve flexibility and coverage., • Help maintain discipline in attendance, task assignment, and shift handoff execution.Quality & Safety Compliance, • Ensure assembly operations follow SOPs, ESD controls, safety regulations, and customer requirements., • Support defect containment, rework coordination, and quality gate execution to protect outgoing quality., • Promote proactive safety behaviors on the production floor to prevent incidents and near misses.Reporting & Leadership Communication, • Prepare daily/weekly production summaries and communicate progress, risks, and action items to management., • Maintain clear documentation of issues, root causes, and follow-up actions; ensure closure with defined owners and timelines., • Support leadership meetings by providing accurate data, line status, and improvement recommendations.Continuous Improvement, • Drive small-scale continuous improvement actions (5S, line layout optimization, standard work refinement) to improve efficiency and reduce waste., • Support cost improvement through reducing rework, scrap, material waste, and non-value-added activities.Required Qualifications, • High school diploma or equivalent with 3+ years of production management experience in the electronics manufacturing industry; OR Associate’s degree (or above) with 2+ years of production management experience in electronics manufacturing., • Strong ability to manage shopfloor execution, prioritize issues, and drive quick recovery actions under pressure., • Good communication and coordination skills to work effectively across multiple functions., • Familiarity with consumer electronics manufacturing processes, including assembly, testing, and backend operations; SMT knowledge is a plus., • Experience using ERP/MES systems and production data analysis tools for tracking and decision-making., • Possession of an OSHA 10-Hour General Industry training certificate, • Advanced proficiency in Microsoft Office (Excel, PowerPoint) for data analysis, reporting, and presentations.Language & Cross-cultural Capability, • Multilingual communication skills preferred, including English, Spanish, and Mandarin Chinese, with the ability to work in cross-cultural teams.Leadership & Problem Solving, • Strong capability to motivate frontline teams and handle conflicts professionally in a production environment., • Ability to quickly identify issues on the line and drive effective resolution to protect schedule and delivery performance.Work Authorization & Scheduling Requirements, • Must be legally authorized to work in the United States., • Ability to support flexible working hours, including shift changes, weekends, and overtime as needed to support production and urgent escalations.What We Offer, • Competitive salary and comprehensive benefits package., • Career growth opportunities in a global manufacturing organization with cross-cultural exposure., • The opportunity to support and participate in cutting-edge technology projects in the electronics manufacturing industry.Note: This job description is intended to describe the general nature and level of work performed. It is not an exhaustive list of all responsibilities, duties, and skills required. Powered by JazzHR 8xo4pUvIAr

Job Description Burrow Global is seeking an experienced Rotating Equipment Planner to support a critical outage on a large reciprocating compressor system. This role focuses on planning, scheduling, and coordinating activities for a major overhaul of the 1st (axial), 2nd, and 3rd (centrifugal) stage compressors. The successful candidate will work closely with the Maintenance, Engineering, Outage, and Contracting teams to ensure safe, reliable, and on-time execution. Candidates will work a 40 hour shift schedule until the TAR begins in the fall and them work a 7/12 schedule until the TAR is completed. Key Responsibilities: • Develop, maintain, and optimize detailed outage work packs for the major overhaul, including 1st (axial), 2nd, and 3rd (centrifugal) stage compressor components., • Create and manage the outage schedule, work breakdown structure, critical path, and resource loading (crafts, materials, tools, and spare parts)., • Identify, sequence, and prioritize maintenance tasks (inspection, disassembly, refurbishment/replacement, reassembly, testing) and ensure proper logic for dependencies., • Coordinate with Engineering for technical scope, drawings, Bill of Materials (BOM), and special tools required for the overhaul., • Ensure all planning activities align with Company QA/QC, HSE, mechanical integrity, and regulatory requirements., • Prepare and issue work packages, permits to work, lockout-tagout (LOTO) procedures, and risk assessments., • Engage with procurement to ensure timely availability of parts, consumables, and tooling; track long-lead items and vendors., • Manage change control, deviations, and field changes; maintain accurate progress reporting and metrics (progress vs. plan, earned value, look-ahead schedules)., • Collaborate with outage lead, maintenance supervisors, and craft supervisors to optimize manpower and equipment utilization., • Provide pre-outage planning deliverables (pre-job packs, risk assessments, spare parts lists) and post-outage closeout documentation., • Lead or participate in daily planning/coordination meetings, facilitating clear communication between company stakeholders, vendor, and client teams. Qualifications: • Minimum 5–7 years of rotating equipment planning/maintenance planning experience in petrochemical, refining, or heavy industrial environments., • Demonstrated experience planning and executing outages involving major compressor packages (reciprocating and/or centrifugal stages)., • Strong knowledge of rotary equipment (pumps, turbines, compressors), mechanical integrity, LOTO, PTW, RCA, and safety best practices., • Proficiency in planning tools and scheduling software (e.g., Primavera P6, MS Project, SAP PM, and CMMS). Strong ability to build and maintain credible work packs and look-ahead plans., • Familiarity with major overhaul workflows: disassembly, inspection, component refurbishment/replacement, alignment, clearances, lubrication systems, seals, couplings, valves, instrumentation., • Excellent communication, coordination, and problem-solving skills; ability to work with cross-functional teams and subcontractors., • Ability to read mechanical, P&ID, electrical, and control system drawings; BOMs and spare parts catalogs., • Knowledge of Permits-to-Work, LOTO, hot work, confined space, and other safety processes. Educational requirements: • Bachelor’s degree in Mechanical Engineering, Maintenance Engineering, or a related technical field preferred; equivalent experience considered., • Willingness to work a site-based schedule, with potential long hours during critical outage windows; occasional travel to supplier sites as required.

Job Description We are advancing its Powering Progress strategy on the journey to net-zero emissions. Achieving this ambition requires uniting strategic and technical expertise across data, strategy, architecture, and innovation. This integration is essential to drive the transformative shifts needed in IT. As part of this journey, we are seeking a skilled and seasoned Solution Architect to enhance automation and fully harness data and innovation. What's the role As a Solution Architect, you'll be a key technical leader providing end-to-end architecture development, consultancy, and assurance across projects, ensuring that applications are well-designed and aligned with standards and reference architecture. You will be working specifically in the Products portfolio for Trading and Supply business. You will specifically work on a project team implementing a global Energy Trade and Risk Management (ETRM) solution on Azure to create a scalable, secure, and strategic landscape that enables the transformation of the Trading capabilities. 1. Architecture and Technical Leadership • Provide strong leadership skills, including fostering collaboration, driving consensus, and effectively communicating complex technical concepts., • Not only lead in your area of expertise but also play a key role in shaping and transforming the role itself—identifying opportunities, driving innovation, and delivering impact that extends beyond the initial remit. As the organization grows, your role is expected to evolve, offering continuous opportunities for development, influence, and leadership., • Serve as the primary contact for architectural aspects of IT projects., • Integrate business process, data, application, technical, and information security dimensions into cohesive IT solutions., • Ensure solution architectures are documented using standard templates and tooling complying with architectural standards., • Guide detailed designers and business analysts during the design phase., • Review and formally approve detailed solution designs., • Support Lead Architect and participate in Architecture Review Board sessions as required. 2. Reference Model Stewardship • Actively contributes to the documentation, enhancement, and maintenance of Reference Models in BizzDesign or any other standard tooling., • Elevate project deliverables to conceptual and logical architecture levels. 3. Technology Foresight • Monitor emerging IT technologies and apply this insight to design future-ready solutions for Shell. 4. Standards Alignment • Stay informed of developments in IT standards and services, ensuring they are incorporated into solution designs. 5. Community Engagement • Champion architectural excellence within the organization., • Engage with stakeholders to address architectural concerns and drive strategic improvements. What We Need from you • Industry Knowledge:, • Knowledge of the end-to-end Trading Business from deal inception through to settlement Technical Architecture & Design: • 10+ years in software and architecture delivery., • Own and drive technical architecture, design, and standards for software products in Commodities Trading., • Confidently lead architecture decisions across portfolios, managing divergent opinions., • Create pragmatic, implementable technical designs balancing risk, complexity, cost, and value., • TOGAF (or similar framework) experience and Enterprise Architecture tooling., • Collaboration & Communication:, • Collaborate with business and IT stakeholders for strategic and day-to-day technical decisions., • Strong communication and collaboration skills with 5+ years' experience in trading environments., • Listen to and interpret needs of technical and business stakeholders, manage expectations, and facilitate discussions., • Be an active participant in the wider Tech Lead and engineering communities., • Problem Solving & Innovation:, • Diagnose problems and implement innovative solutions fitting into the wider Trading picture., • Manage dependencies, overcome obstacles, and maximize value against constraints, managing trade-offs or technical debt., • Expert in one or more of the programming languages (Node.js, .Net, .Net Core, Python etc) with Cloud Native Platform Development (Azure/AWS), • Expert in one or more of the front-end development technologies (specifically React and Micro frontend)., • Expert in one or more of Data Development (SQL Databases, No SQL, Cloud Datastores etc) technologies, • Exposure to OpenLink Endur, SAP HANA, Salesforce, API management, Multifactor authentication., • Azure Platform & Cloud Native:, • Hands-on experience in architecting applications into the Azure platform, including migrations/re-platforming of legacy on-premise systems., • Engineering and architecture experience in designing and building containers, Microservices, Cloud Native applications, and federated Data platforms (Data Mesh)., • Data Architecture, Data Management & Diverse Data Types:, • Strong knowledge of data management: engineering, pipeline development, warehousing, storage, lifecycle management, privacy, security., • Experience with diverse data types: big data, high velocity streaming, IoT, low latency event triggers, longitudinal time series., • Proficient in SQL and NoSQL databases., • Azure Services & Integration:, • Significant experience with Azure Functions, Web Apps, distributed/event-driven architecture (event hub, event bus, Kafka), ELK., • Intermediate to advanced exposure to Azure Active Directory, Azure Data Factory, Azure Data Lake, Azure Storage, Azure Kubernetes Service, CosmosDB, Azure SQL., • Integration experience with Confluent/Kafka, API Management, Logic Apps., • CI/CD & DevOps: 5+ years in CI/CD delivery using Git/GitHub, VSTS/Azure DevOps, Terraform, Ansible., • Agile & Engineering Standards:, • Practical agile experience in both start-up and enterprise environments., • Lead the engineering community to follow Engineer Management standards, ensuring consistency and reuse., • Understand and deliver core engineering GPA objectives., • Create a collaborative environment for technical roles to drive clear decisions and consistency., • Documentation & Coordination:, • Address Business Process, Data, Application, Technical, and Information Security aspects of IT Solutions, documenting in High-Level Design documents., • Coordinate and develop information with third parties (Data Architects, IRM, Support Operations teams, Business stakeholders), internal and external.

Job DescriptionDescription: In accordance with company policies and procedures, the Manufacturing & Process Engineer is responsible for monitoring, developing, and improving manufacturing processes and equipment to support the strategic direction of the company. This position is charged with executing these efforts to facilitate safety, quality, cost and delivery excellence within the fast-paced environment at G&H Diversified Mfg., LP (G&H). Critical Functions: 1. Evaluates manufacturing processes by designing and conducting research programs; applying knowledge of product design, fabrication, assembly, tooling, and materials; conferring with equipment vendors; soliciting observations from operators., 2. Develops manufacturing processes by studying product requirements; researching, designing, modifying, and testing manufacturing methods and equipment., 3. Improves manufacturing efficiency by analyzing and planning work flow, space requirements, workforce utilization, and equipment layout., 4. Designs custom equipment to solve manufacturing challenges. Accurately develop solid models of completely assembled products and detail parts including bill of materials (BOM) utilizing SolidWorks software, company document management system and interface with company ERP system., 5. Design for manufacturing including 3D associative solid models, detail drawings, weldment drawings, assemblies, and installation drawings using G&H drawing specifications., 6. Assures product and process quality by working with the Quality department to establish testing methods; testing finished-product and process capabilities; establishing standards., 7. Functions as a liaison and facilitator to maintain effective communication and collaboration between Engineering, Quality, Operations and Supply Chain departments, and provide solutions to each., 8. Provides manufacturing decision-making information by calculating production, labor, and material costs; reviewing production schedules; estimating future requirements., 9. Prepares product and process reports by collecting, analyzing, and summarizing information and trends. Designs and runs tests / experiments as needed., 10. Completes design and development projects by training and guiding other engineers, designers, and technicians., 11. Maintains product and company reputation by ensuring company processes comply with government safety and environmental regulations. Works in accordance with ISO 9001 and other applicable QMS standards and maintains documentation accordingly. Writes and distributes Management of Change (MOC) and other documents to notify personnel of changes to products, processes, etc., 13. 5 to 7 years’ experience in a similar role implementing lean principles and conducting process improvement events., 14. Must have experience with modern manufacturing methods including CNC turning and milling, laser cutting, sheetmetal / forming, welding, 3D printing., 15. Must have experience and desire to work hands-on on the shop floor of an industrial fabrication and assembly business with minimal office time., 16. Experience with programming CNC equipment, robotics, and automation are desirable., 17. Demonstrate experience revising manufacturing processes/equipment to solve production and/or quality constraints., 18. Strategic thinker, strong analytical skills, able to analyze considerable and complex data to drive decisions., 19. Proficient with SolidWorks CAD modeling and drafting, as well as Microsoft Outlook, Word, Excel, and PowerPoint. Experience with AutoCAD or similar 2D drafting software desirable., 20. Experience with Product Data Management (PDM) systems desirable., 21. Excels in a highly dynamic organization, experiencing high growth rates and change. Accustomed to tight deadlines and the need for quick solutions., 22. Change Agent – skilled with enabling change, strong influencing abilities particularly with stakeholders and frontline teams., 23. Sound interpersonal/written communication skills; can effectively interact with all levels of management. Experience writing technical documents including technical manuals, work instructions, etc., 24. Team player able to work well across business operations and develop strong business teams., 25. Ability to work on multiple projects simultaneously with limited direction. Capable of managing competing interests and, 26. Bachelor of Science degree in Engineering, Manufacturing, or Industrial Systems desirable but not required.

Job DescriptionDescription: We are ERock! Enchanted Rock is a leader and innovator of Electrical Resiliency-As-A-Service. Our advanced dual-purpose microgrids protect companies, critical infrastructure, and communities from unexpected power outages, ensuring business continuity and civic durability. Enchanted Rock’s dual-purpose microgrids use natural gas and renewable natural gas (RNG) to drive the nation’s most dependable microgrids — all while producing significantly lower to zero carbon emissions than traditional diesel backup generators. Powered by our revolutionary GraniteEcosystem™ software, Enchanted Rock solutions provide 24/7/365 monitoring, optimization, and forecasting to deliver worry-free, reliable power for businesses. The Power is On — and we keep it on. What you’ll do… We are seeking a Manufacturing Engineer who is driven, innovative, and detail-oriented to join our manufacturing operations team. This role will focus on improving manufacturing processes, designing production workflows, implementing lean principles, and supporting product quality to ensure that every Enchanted Rock solution meets our high standards for performance and reliability. Key Responsibilities: • Designing, developing, and optimizing manufacturing processes to improve efficiency, quality, and safety., • Collaborating with design engineering on new product introduction to ensure manufacturability and cost-effectiveness., • Creating, maintaining, and updating work instructions, process documentation, and standard operating procedures., • Implementing lean manufacturing and continuous improvement initiatives to reduce waste and improve throughput., • Analyzing production data and metrics to identify trends and drive problem-solving efforts., • Supporting troubleshooting of production issues, including mechanical, electrical, and control system challenges., • Coordinating with supply chain and quality teams to resolve material or component issues., • Leading projects to integrate new equipment, automation solutions, and tooling into production lines., • Training production staff on new processes, tools, and best practices.Requirements: Required Qualification & Experience: • Bachelor’s degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, or related field., • 3+ years of manufacturing engineering or process improvement experience., • Proficiency with CAD software (SolidWorks preferred) and manufacturing process design tools., • Knowledge of lean manufacturing, Six Sigma, or continuous improvement methodologies., • Ability to read and interpret engineering drawings, schematics, and technical documents., • Hands-on experience with manufacturing equipment, tooling, and fixtures., • Familiarity with ERP/MRP systems., • Ability to work in a fast-paced environment and manage multiple projects simultaneously., • Have experience with mechanical and electrical manufacturing environments., • Are skilled in CAD, manufacturing process simulation, or PLC/control systems., • Bring proven lean, Six Sigma, or process optimization expertise., • Can quickly identify and resolve root cause issues., • Possess strong communication skills for cross-functional collaboration., • Medical, Dental, Vision, and Prescription Drug Insurance, • Company-Paid Life Insurance, • Flexible Spending Account (FSA), • Wellness Programs and Incentives, • 401(k) Retirement Plan & Company Match, • Paid Time Off – Sick & Vacation Time, • Paid Holidays, • Cool Open-Office Concept Do you have what it takes to join the Enchanted Rock team? Send us your resume today. Be yourself and keep it useful, funny, and cool! Enchanted Rock is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. At Enchanted Rock, we embrace diversity, including all the unique characteristics that make us human: race, age, sexual orientation, gender identity, religion, disability, and education — to name a few. We understand and recognize that diverse backgrounds and perspectives strengthen our teams and our business. The foundation of our diversity efforts is closely tied to our core values specifically our value of “The Team” which includes “Mutual Respect, Openness, and Honesty.”

Job Description Bonus: Eligible for up to $5,0000 RELOCATION AND HIRING BONUS Job Title: CNC Machinist Specialist (Expert Level) Department: Machine Shop Reports To: Supervisor of Department FLSA: Non-Exempt Status: Full-Time Shift: 1st & 2nd shift (4x10 Schedule) (1st 5:00 am - 3:00 PM) (2nd 2:45 PM - 12:45 AM) Location: Pueblo, CO (Relocation Assistance Available) Remote: On-Site Pay Range: $30.00-$39.00 Hourly About Gulftech International Our companies are the world’s recognized leaders in the engineering, manufacturing, leasing, selling, and servicing of industrial equipment and components serving food production and processing companies. Gulftech’s family of companies touches 90% of the world’s fresh produce, nuts, and fish products across 85 countries worldwide. About Gulfco Manufacturing Gulfco is a family-owned manufacturing organization with best-in-class operations and a “small company” culture that produces parts, equipment, and industrial solutions for the global food processing and packaging industries. As a proud member of the Gulftech family of companies, we serve as the turnkey supplier to a diverse portfolio of multi-national contract manufacturers, each of which is the leader in their respective market throughout the world. Job Summary Are you a skilled CNC Machinist who thrives on challenging setups and tight tolerances? This role goes beyond button-pushing — we need someone confident in setting up, dialing in, and producing complex, one-off, and low-volume parts with high precision. Responsibilities Must be a subject matter expert in the following functions/activities (perform correctly and without assistance): Able to Run Manual and CNC Machines at an expert Level. • Perform full setups on CNC mills and/or lathes from print or model — including indicating vises, fixtures, and part zeros., • Interpret complex blueprints, GD&T, and 3D models to execute machining strategies., • Adjust feeds, speeds, tooling, and offsets to optimize quality and efficiency., • Troubleshoot issues related to tooling, setup, and part accuracy independently., • Ensure in-process inspection and first article inspection compliance., • Collaborate with engineers and programmers to refine setups and improve processes. What You Bring: • 5+ years of CNC machining experience, with a strong emphasis on complex setups and first-run parts., • Strong proficiency in reading and interpreting technical drawings, GD&T, and setup sheets., • Strong understanding of machine offsets, tool presetting, and basic G/M code., • Experience with multi-axis machining or live tooling., • Strong understanding of machining processes and techniques., • Proficient in reading and interpreting blueprints and technical drawings., • Familiar with the use of precision measuring instruments like micrometers and calipers., • Solid understanding of lean manufacturing Benefits and Compensation • Two medical plans (PPO & HSA), dental, and vision insurance, • Paid time off, Vacation, and eight Holidays, • Employee assistance program (EAP), • 401k, • Profit sharing, • Free Life, • Free AD&D, • Free Disability insurance (Shot and Long-Term Disability), • Tuition Assistance, • Company cell phone/cell phone stipend *Salary information is a general guideline only. Actual compensation considers factors such as (but not limited to) the scope and responsibilities of the position, location, work experience, education, and key skills. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. *Gulfco Manufacturing is dedicated to the principles of equal employment opportunity in any term, condition, or privilege of employment. We do not discriminate against applicants or employees on the basis of age, ancestry, race, sex (including pregnancy and sexual orientation/gender identity), color, religion, national origin, parental status, marital status, political affiliation, family medical history or genetic information, military or veteran status, disability, medical condition, or any other non-merit based factor or status protected by federal, state or local law

Job Description DIHO Consulting USA is seeking applicants for the Drill Press Operator position! Position Summary The Drill Press Operator (Night shift) is responsible for setting up, operating, and maintaining drill press machinery to produce precision holes in metal components according to blueprints and specifications. This role ensures parts meet required tolerances and quality standards while maintaining safe and efficient operation of equipment. Responsibilities • Set up and operate manual, semi-automatic, or radial drill presses., • Select proper drill bits, tooling, speeds, and feeds., • Position and secure workpieces using clamps, vises, jigs, and fixtures., • Drill, tap, ream, countersink, and bore holes to required dimensions., • Inspect parts using calipers, gauges, and micrometers., • Verify hole depth, diameter, location, and tolerances., • Load/unload materials and prepare components for machining., • Follow OSHA and company safety procedures; wear required PPE., • Perform basic maintenance such as cleaning, lubrication, and replacing tooling., • Complete production logs and communicate job status to supervisors. Qualifications • High school diploma or GED required, • 1+ years of drill press or machining experience preferred., • Ability to read blueprints, technical drawings, and specifications., • Knowledge of machining principles, speeds, feeds, and tooling., • Good communication skills and ability to work with cross-functional teams, • Ability to follow instructions and work in a team environment., • Ability to multitask and prioritize in a fast-paced environment., • Must be able to pass pre-employment screenings and background checks, • Strong attention to detail, safety awareness, and teamwork. Physical Requirements • Must be able to stand for prolonged periods (8+ hours), • Must be able to lift, push, pull, or carry up to 50 lbs. independently, • Frequent bending, stooping, reaching, and manual handling of materials required, • Good hand-eye coordination and manual dexterity, • Ability to tolerate noise, heat, and dust in a manufacturing environment, • Visual acuity to read measuring tools, drawings, and detect quality defects, • Must pass initial and ongoing physical or occupational health screenings (e.g., lifting assessment, vision test, hearing test, etc.), • Must be able to wear required PPE, including steel-toe boots, gloves, safety glasses, and hearing protection. Work Environment Manufacturing floor with exposure to moving mechanical parts, sharp materials, and moderate to loud noise. May be exposed to hot or cold environments depending on season. Work schedule may include overtime, weekend shifts, or on-call schedules as needed. Night Shift (hours determined by production schedule)

Job DescriptionRole Overview The Operations Manager of Customer Operations is responsible for functions that include Customer Care and Contract Transfers, ensuring exceptional service delivery and operational excellence across both areas. This role oversees the end-to-end customer experience for inquiries and contract transfers, driving process improvements, team performance, and compliance while maintaining proactive communication with customers and partners. The Operations Manager leads international teams, owns operational outcomes, and provides leadership visibility through KPI reporting and strategic initiatives Key Responsibilities • Own and oversee the end-to-end contract transfer process from intake through completion, • Identify process gaps, bottlenecks, and failure points; implement improvements to reduce cycle time and customer friction in Customer Operation processes, • Lead an international team of support specialists, • Establish clear operating standards, workflows, and escalation paths for non-standard or complex cases, • Partner with servicers and internal stakeholders, • Ensure customers, buyers, realtors, and escrow partners receive clear and timely communication throughout the transfer, • Own operational projects related to transfer automation, tooling, and process redesign, • Own reporting for contract transfer performance and operational health, • Track and report on key KPIs including backlog volume, case aging, transfer and queue cycle time, and customer contact rates, • Provide regular executive updates on risks, trends, and improvement initiatives, • Use data to prioritize operational projects and staffing needs, • Daily and weekly performance reporting, • Agent coaching plans, • Contract transfer cycle time, • Queue close rates, • Repeat customer contacts related to transfers, • Percentage of transfers completed within escrow or closing timelines Required Qualifications: • 5+ years of experience in operations management, contact-center operations, or service delivery, • Experience leading teams in high-volume, process-driven environments, • Strong process improvement and analytical skills, • Excellent written and verbal communication skills, • Experience in residential solar, energy services, mortgage, title, or escrow operations, • Familiarity with solar contracts, PPAs, leases, or asset transfer processes, • Experience working with case management or CRM platforms such as Salesforce, • Experience with BPO Account Management and understanding of co-employment rules Powered by JazzHR Wz1gNViBjp

Job DescriptionPurpose of the positionThe Backend Assembly Engineer is responsible for supporting day-to-day backend assembly line execution by monitoring production progress, driving KPI performance, and coordinating cross-functional resources to remove bottlenecks. This role ensures stable output, quality, cost, and delivery performance through hands-on shopfloor management, frontline operator leadership, rapid problem-solving, and timely communication and escalation to managementDuties and Responsibilities • Production & Operations Management, • Monitor real-time production status, output, and WIP to ensure schedule attainment and on-time delivery., • Track key shopfloor indicators such as throughput, cycle time, downtime, and bottleneck stations; initiate recovery actions when gaps are identified., • Maintain daily production dashboards and ensure data accuracy in ERP/MES systems., • Identify production constraints (manpower, material, equipment, quality holds, test capacity) and drive timely resolution., • Coordinate with Planning, Quality, Engineering, Maintenance, and Logistics teams to secure resources and restore line flow., • Support escalation management with clear problem statements, containment actions, and recovery plans., • Manage daily assembly line execution, including line balance, station readiness, and staffing allocation to meet output targets., • Ensure work instructions, tooling, and fixtures are available and correctly used at the line., • Support quick response to abnormal events (line stops, defects, material shortages) to minimize production impact., • People Leadership & Team Development, • Provide on-floor guidance to operators and line leaders to reinforce standard work, safety practices, and quality requirements., • Assist with operator onboarding, cross-training, and skill matrix updates to improve flexibility and coverage., • Help maintain discipline in attendance, task assignment, and shift handoff execution., • Quality & Safety Compliance, • Ensure assembly operations follow SOPs, ESD controls, safety regulations, and customer requirements., • Support defect containment, rework coordination, and quality gate execution to protect outgoing quality., • Promote proactive safety behaviors on the production floor to prevent incidents and near misses., • Reporting & Leadership Communication, • Prepare daily/weekly production summaries and communicate progress, risks, and action items to management., • Maintain clear documentation of issues, root causes, and follow-up actions; ensure closure with defined owners and timelines., • Support leadership meetings by providing accurate data, line status, and improvement recommendations., • Continuous Improvement, • Drive small-scale continuous improvement actions (5S, line layout optimization, standard work refinement) to improve efficiency and reduce waste., • Support cost improvement through reducing rework, scrap, material waste, and non-value-added activities.Education and work experience :, • High school diploma or equivalent with 3+ years of production management experience in the electronics manufacturing industry; OR Associate’s degree (or above) with 2+ years of production management experience in electronics manufacturing., • Strong ability to manage shopfloor execution, prioritize issues, and drive quick recovery actions under pressure., • Good communication and coordination skills to work effectively across multiple functions., • Familiarity with consumer electronics manufacturing processes, including assembly, testing, and backend operations; SMT knowledge is a plus., • Experience using ERP/MES systems and production data analysis tools for tracking and decision-making., • Possession of an OSHA 10-Hour General Industry training certificate, • Advanced proficiency in Microsoft Office (Excel, PowerPoint) for data analysis, reporting, and presentations.Language & Cross-cultural Capability, • Multilingual communication skills preferred, including English, Spanish, and Mandarin Chinese, with the ability to work in cross-cultural teams.Leadership & Problem Solving, • Strong capability to motivate frontline teams and handle conflicts professionally in a production environment., • Ability to quickly identify issues on the line and drive effective resolution to protect schedule and delivery performance.Work Authorization & Scheduling Requirements, • Must be legally authorized to work in the United States., • Ability to support flexible working hours, including shift changes, weekends, and overtime as needed to support production and urgent escalations.What We Offer, • Competitive salary and comprehensive benefits package., • Career growth opportunities in a global manufacturing organization with cross-cultural exposure., • The opportunity to support and participate in cutting-edge technology projects in the electronics manufacturing industry.Note: This job description is intended to describe the general nature and level of work performed. It is not an exhaustive list of all responsibilities, duties, and skills required. Powered by JazzHR JQdnXxamWS

Job Description Senior Enterprise Integration Engineer Location: Houston or Dallas Texas; onsite-hybrid model Salary: $135-160k / year - DOE Benefits: This position is eligible for Medical, Dental, Vision, and 401(k) benefits We are seeking a Senior Enterprise Integration Engineer to play a key hands-on role in designing, building, and supporting enterprise integrations across SAP and non-SAP applications, external business partners, and enterprise data and analytics platforms. This role is a key contributor to our integration modernization strategy, supporting SAP BTP Integration Suite, B2B/EDI partner connectivity, and analytics and data platforms that consume data from a variety of enterprise and external sources. SAP Business Technology Platform (BTP) serves as the primary middleware, alongside other enterprise integration platforms (such as Azure Integration Services and BizTalk) where appropriate, for integrations connecting SAP S/4HANA with SAP and non-SAP systems. This role blends systems integration engineering (connecting enterprise applications and platforms) with data engineering (building reliable data pipelines and data integration patterns, including batch, streaming, and virtualized access, for downstream analytics and reporting). This position is well-suited for a senior engineer who is comfortable owning integration solutions end-to-end while collaborating closely with SAP, application, infrastructure, and analytics teams. The role emphasizes designing integrations with built-in, automated monitoring and alerting, enabling proactive detection and prevention of failures across enterprise interfaces rather than reliance on manual monitoring. Essential Job Functions Enterprise Integration • Design, develop, and support application-to-application (A2A) and business-to-business (B2B) integrations across SAP and non-SAP systems, • Serve as a senior technical contributor responsible for integration solution design, implementation, and production support, • Apply integration best practices including message transformation, error handling, retries, reprocessing, and monitoring, • Develop and maintain integration documentation, standards, and operational runbooks, • Design and support integrations with SAP S/4HANA using IDocs, APIs, events, and OData services, • Build and maintain integrations using SAP BTP integration capabilities as the primary middleware for SAP ↔ non-SAP connectivity, with other enterprise integration platforms used where appropriate, • Support integrations with external business partners, including coordination of connectivity, testing, and production readiness, • Troubleshoot and resolve partner integration issues in collaboration with internal teams and external stakeholders, • Integrate SAP and non-SAP data sources into enterprise data and analytics platforms to support reporting and downstream consumption, • Design and support data pipelines and data integration patterns, including batch ingestion, streaming, dataflows, and virtualized access, depending on use case, • Enable reliable movement and access to data across operational systems, analytical platforms, and semantic layers, • Support integrations across their full lifecycle, including development, testing, deployment, and production support, • Design and implement built-in, automated monitoring, alerting, and notifications that provide proactive visibility into integration health and failures, • Identify failure patterns and implement preventative safeguards to reduce repeat incidents across interfaces, • Establish and maintain operational dashboards, alerts, and runbooks, • Identify integration risks, performance issues, and technical debt, • Partner with SAP developers, application teams (SAP and Non-SAP), data architects, analysts, infrastructure engineers, and security teams to deliver reliable system and data solutions., • Bachelor’s degree in IT preferred such as Computer Science, Computer Engineering or equivalent., • 7+ years of experience in enterprise integration, middleware development, systems integration, or data integration, • Strong hands-on experience designing and supporting SAP S/4HANA integrations, including mandatory experience with SAP IDocs, • Experience using SAP BTP as an integration or middleware platform, with exposure to other enterprise integration platforms preferred, • Strong understanding of:, • SAP integration mechanisms including IDocs, APIs, events, and OData services, • REST and SOAP APIs, • XML, JSON, and flat file data formats, • Secure integration patterns (OAuth, certificates, SFTP), • Strong SQL skills and experience supporting integration logging, reference data, or operational reporting, • Experience with SAP Ariba integrations, • Experience supporting or migrating Microsoft BizTalk Server integrations, • Experience with B2B/EDI integrations and standards such as ANSI X12 or RosettaNet (RNIF)., • Deeper experience with SAP BTP integration capabilities (cloud-based integration, API-driven integration, event mesh), • Experience with data integration approaches beyond traditional ETL, such as dataflows, data virtualization, or distributed processing frameworks, • Familiarity with cloud-native integration services (Azure or similar), • Strong analytical and problem-solving skills, • Ability to work independently while collaborating effectively with cross-functional teams, • Ability to clearly communicate integration designs, tradeoffs, and risks to technical and non‑technical stakeholders, • Strong ownership mindset for production systems and business-critical integrations, • Organized, detail oriented, and disciplined in documentation and operational practices

Job Description This job description defines duties, responsibilities and the requirements for the position of R&D Methods Engineering Technician. SUMMARY OF DUTIES • Manage testing instrumentation, inventory and calibration., • Manage equipment calibration needs. Replace instrumentation as needed to ensure that all test data is being recorded by compliant instrument., • Support internal calibration of testing and prototyping equipment., • Conduct calibration of make and break equipment, Combined Load Frame, OD and Wall scanner., • Generate calibration certificates., • Attend pre-production, schedule meetings and gather the required tool(s) for each test. Elevate concerns if tooling can not be ready on time., • Generate kitting packages (required tooling) for upcoming testing projects., • Manage testing tooling inventory (leak detection, pressure vessel, seals, test caps), • Generate drawing and specification for upcoming tooling needs., • Source the material needed to build the tooling internally or coordinate with subcontractor., • Follow up with subcontractor to ensure the tooling is being built to spec and is delivered on time., • Create internal documentation to build our tooling internally., • Inspect the tooling and perform audit to ensure that the tooling inventory is up to date., • Manage tooling inspection and repair., • Coordinate the repair to minimize impact on the testing scheduling., • Analyze shop floor production problems and assist in troubleshooting, using root cause analysis methods., • Train and assess technicians., • Participate in investigation of non-conformance and implementation of corrective and preventive actions., • Follow all company rules, procedures, policies, and safety rules., • Minimum 2 years of experience in industrial environment., • Ability to read blueprints., • Forklift and crane operator., • Proficient in Microsoft Office Suite (Word, Excel, PowerPoint, etc.), • Ability to organize and prioritize workload and to meet deadlines., • Soldering experience preferred., • Ability to create and to update CAD drawings is preferred., • Ability to read, write and speak well in English and process strong analytical interpersonal skills., • Ability to understand and execute instructions through strong organizational skills and attention to detail., • Must be able to pass applicable testing as required.

Job DescriptionMolding EngineerPay: 110k to 130kSummary: As a Molding Engineer, you will be responsible for developing and optimizing molding processes for high-precision interconnect components, connectors, and related products. This role focuses on process development, tooling optimization, production support, quality compliance, troubleshooting, and continuous improvement.You will lead key product development initiatives and oversee implementation across various molding compounds and presses. Collaboration with cross-functional teams is essential to support business objectives and meet customer requirements.Key Responsibilities: • Develop, optimize, and maintain injection molding processes for precision components, • Support tooling design, modifications, and process improvements to enhance efficiency and reduce costs, • Troubleshoot molding and production issues, implementing effective corrective actions, • Ensure compliance with quality standards, regulatory requirements, and internal procedures, • Lead and support new product development and process validation efforts, • Collaborate with engineering, production, and quality teams to meet project timelines and goals, • Drive continuous improvement initiatives related to process capability, yield, and cycle time Requirements:, • Bachelor’s degree in Engineering (Plastics or Mechanical preferred), or equivalent work experience, • Minimum of 5 years of engineering experience in a manufacturing environment, • At least 5 years of experience in injection molding, mold design, and process engineering, • Experience with connector design and cable assembly is preferred, • Strong knowledge of cost-effective tool modification techniques, • Understanding of fabrication processes, machining, grinding, wire EDM, and molding tolerances, • Familiarity with electrical and mechanical testing methods and regulatory standards, • Proficiency in Microsoft Office, Google Suite, SolidWorks, and database navigation (e.g., Access), • Excellent written and verbal communication skills Systems & Tools:, • Google Enterprise, • ADP

Job Description\uD83D\uDC4B Intro:Jupe is building a hardware and full stack software platform to go after the shelter problem for the world. Our current product is a flat packed structure that can ship anywhere, 15X more efficiently, than anything else on the market and pop up in a few hours. If you haven't been there, please first check out the Careers @ Jupe page here. \uD83D\uDCAAWhat you'll be doing:As the As the Process Engineer, you will be filling a critical position broadly responsible for the configuration and optimization of the production space as needed. You will report to the COO and your role will include significant amounts collaboration with the mechanical design engineer based in SF. \uD83E\uDE90Responsibilities:- Create and adapt process documentation, ensuring it is kept current (e.g. Manufacturing Instructions, Standard works documents, PFMEA, standard works, and Control Plans)- Create and maintain sketches, engineering drawings, and CAD models- Evaluate and select components and subassemblies- Design and build mechanical tooling- Investigate and solve production problems- Create and manage production schedules- Communicate with vendors and suppliers on technical matters- Utilize SPC data and tools to characterize all equipment processes for operating limits, robustness, and action limits- Develop and enable data-driven operational and financial decisions through predictive insights into tool and process performance, including the integration of factory data systems- Champion continuous improvement projects and standardization to support best in class Lean manufacturing systems to maximize yield, capacity, and capability - Generate and execute business improvement ideas for cost reduction, labor savings, material flow, and safety -Perform supporting activities for engineering and manufacturing including 5S and Lean manufacturing activities, material handling improvements, production line configuration, and safety procedures \uD83E\uDD67Basic Qualifications:- Bachelor’s or an advanced degree in Engineering.- Minimum of 3 years of hands-on experience in complex manufacturing e.g., automotive, facilities, aerospace, manufacturing, etc.- Familiarity with manufacturing with material systems and coatings such as wood products, fiberglass reinforced polymers, thermal and acoustic insulation materials.- Mastery with CAD software such as OnShape, SolidWorks, Siemens NX, AutoCAD, Rhino, etc. towards creating static, quasi-static, deformable body, durability, aero and thermal sytems- Strong organizational and scheduling skills. \uD83E\uDE9APreferred Skills and Experience:- Experience with tiny houses/trailers/RV’s/ADU’s/boats, or other living accommodations in small spaces.- Experience with drafting and GD&T concepts. \uD83E\uDDF0Additional Requirements:- Ability to perform job duties that require standing, kneeling, crouching, twisting upper body, working in cramped positions in small openings.- Ability to work safely from ladders.- Work performed in an environment requiring exposure to sawdust, odors, and noise.- Operational schedule may vary based on company needs. Schedule flexibility is required.- Travel may be required to support shipping, delivery, setup, product support, and other needs. \uD83D\uDE80Ready to build something amazing? Apply here and if you have more to add write us at or DM the CEO @ProfDumpster on Twitter. LFG!!!Jupe is an Equal Opportunity Employer; employment with Jupe is governed on the basis of merit, competence and qualifications, and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability, or any other legally protected status. Contact for more information or to submit materials. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionDescription:Position Overview A well-established manufacturer and distributor of pipe fittings and components is seeking a CNC Machinist to join its production team in Houston, TX. The ideal candidate will bring precision, efficiency, and a strong understanding of CNC machinery to help deliver high-quality industrial products used across the energy, petrochemical, and construction sectors. This is a 2nd Shift only opportunity Key Responsibilities • We are looking for LOD VTL operators to run 3 machine cells, • Set up and operate CNC lathes and mills to machine components to exact specifications., • Interpret technical drawings, blueprints, and work orders to determine tooling and setup requirements., • Load and verify CNC programs; adjust speeds and feeds to optimize quality and productivity., • Inspect finished parts using precision measuring instruments (calipers, micrometers, thread gauges)., • Conduct in-process checks and make minor program edits or tool offsets as needed., • Monitor equipment performance, conduct routine maintenance, and report issues to maintenance or supervision., • Experience in the pipe fitting or industrial hardware sector., • Background working with oil & gas or heavy industrial products., • Must be able to set up and indicate on manual tables 30” NPS flanges., • Must be willing to work 2nd shift (4pm-1am Monday-Friday) with possibility of overtime., • High school diploma or GED required; trade school or machining certificate preferred., • Minimum 2–3 years of experience operating CNC machines in a manufacturing environment., • Proficiency in reading engineering drawings and using inspection tools., • Familiarity with machining stainless steel, carbon steel, and alloys is a plus., • Knowledge of G-code/M-code programming and CNC control systems (e.g., Fanuc, Haas) preferred., • Ability to work independently, solve problems, and ensure part quality with minimal supervision.

Job DescriptionDescription: About Piping Technology & Products (PT&P) PT&P is a trusted leader in the design and manufacturing of engineered products for piping systems, proudly serving industries like oil & gas, power, and chemicals since 1978. Headquartered in Houston, we’re known for innovation, quality, and customer commitment. Join our team and help deliver solutions that keep critical infrastructure running safely and efficiently. Position Summary The Drill Press Operator is responsible for setting up, operating, and maintaining drill press machinery to produce precision holes in metal components according to blueprints and specifications. This role ensures parts meet required tolerances and quality standards while maintaining safe and efficient operation of equipment. Responsibilities • Set up and operate manual, semi-automatic, or radial drill presses., • Select proper drill bits, tooling, speeds, and feeds., • Position and secure workpieces using clamps, vises, jigs, and fixtures., • Drill, tap, ream, countersink, and bore holes to required dimensions., • Inspect parts using calipers, gauges, and micrometers., • Verify hole depth, diameter, location, and tolerances., • Load/unload materials and prepare components for machining., • Follow OSHA and company safety procedures; wear required PPE., • Perform basic maintenance such as cleaning, lubrication, and replacing tooling., • High school diploma or GED required, • 1+ years of drill press or machining experience preferred., • Ability to read blueprints, technical drawings, and specifications., • Knowledge of machining principles, speeds, feeds, and tooling., • Good communication skills and ability to work with cross-functional teams, • Ability to follow instructions and work in a team environment., • Ability to multitask and prioritize in a fast-paced environment., • Must be able to pass pre-employment screenings and background checks, • Must be able to stand for prolonged periods (8+ hours), • Must be able to lift, push, pull, or carry up to 50 lbs. independently, • Frequent bending, stooping, reaching, and manual handling of materials required, • Good hand-eye coordination and manual dexterity, • Ability to tolerate noise, heat, and dust in a manufacturing environment, • Visual acuity to read measuring tools, drawings, and detect quality defects, • Must pass initial and ongoing physical or occupational health screenings (e.g., lifting assessment, vision test, hearing test, etc.) Manufacturing floor with exposure to moving mechanical parts, sharp materials, and moderate to loud noise. May be exposed to hot or cold environments depending on season. Work schedule may include overtime, weekend shifts, or on-call schedules as needed.