Welder jobs in Kansas City, KansasCreate job alerts

Job DescriptionDescription: The Welder/Fabrication/Maintenance Worker is responsible for fabricating and welding unique parts and assemblies required in all areas of the scrapyard. • Safety in the welding and fabrication division must be observed and practiced at all times. Additional PPE’s such as welding hoods, welding gloves, leather clothing, and full face shields (along with safety glasses) are required., • The use of specialty welding equipment is required in this division and all manufacture safety procedures must be adhered to at all times., • All specialty equipment must be checked for damage and repaired if damage exists before each use., • The Welder and Fabrication Worker is responsible for fabricating and welding specialized assemblies to replace parts that have been worn past their usable life., • Repair and fabricate various size trailers used to haul scrap metal material from commercial and industrial accounts., • Repair various size metal containers, used by roll off trucks to haul scrap metal from commercial and industrial accounts., • Assist on shredder maintenance and repairs when directed., • Clean and maintain the welding area, using whatever resources are necessary, to remove objects, debris and hazards from the work area., • Secure all high pressure cylinders., • Practice safe welding and torching processes at all times., • Ensure a clean, safe and orderly workplace; clean and prepare sites by removing debris and possible hazards., • Properly follow company and OSHA safety procedures., • Follow instructions from Shredder & Maintenance Superintendent., • Adhere to operating and health and safety protocols., • All other duties as assigned.Requirements: Qualifications • Must be safety minded. Must understand and abide by all safety rules and regulations., • Must have working knowledge of safe welding and torching practices., • Must be organized and keep a clean and safe work area., • Minimum of 3 years welding experience., • Ability to use variety of hand tools required for fabrication, welding and repairs., • Must work independently as well as within a team environment., • Welder and fabrication Worker must be able to frequently lift and carry up to 50 pounds., • Must be able to work overhead, climb ladders, kneel, and stand for long periods., • Ability and desire to work in all weather conditions including rain, snow, cold and heat., • Ability to communicate effectively.

Job Description SUMMARY: The Manufacturing Engineer position is responsible for optimizing manufacturing and troubleshooting production problems, planning, and designing manufacturing plant floor layouts to properly locate and co-ordinate equipment and material for efficient production. Additional responsibilities include, but are not limited to; preparing time studies, project planning/management, including managing budgets, supporting Production, developing, and maintaining systems needed to drive continuous improvement in areas of cost, quality, safety, lead time and use of working capital. JOB RESPONSIBILITIES: • Evaluate tools and equipment process options that will reduce cost in the operation, • Seek approval for investments in machinery and equipment that will improve manufacturing / assembly operations, • Produce engineering drawings for and design fixturing / tooling, • Implement lean manufacturing principles such as visual controls, pull inventory systems within a process, workplace organization and continuous improvement, • Provide manufacturing technical support for production operations, which includes tooling, fixturing and process troubleshooting utilizing existing systems and procedures, as well as investigate new technologies, methods, and processes to improve existing operations, • Monitor and correct safety / ergonomic issues, • Support the CI (Continuous Improvement) team to develop and organize lean events, • Actively participate in the WOW (War On Waste) team or program and assist in the implementation of WOW events, • Support the NPI (New Product Introduction) process; evaluating new projects for tooling and equipment needs, • Drive continuous improvement and eliminate waste in all manufacturing facilities, • Aid in workstation load balancing for all manufacturing areas, • Verify, review, and implement torque specifications as well as high risk part specifications, • Track welder certifications and make necessary adjustments based on requirements, • Manage plant and campus layouts, including, but not limited to, production lines and stations, office space, parking lots and warehousing, • Investigate problems, determine root cause, and implement corrective and preventative actions by communicating with and assisting cross-functional teams (quality, engineering, production, materials, purchasing, etcetera) to resolve issues, • Read current literature, talk with colleagues, participate in educational programs, attend workshops, or participate in professional organizations or conferences to keep abreast of developments in the manufacturing field, • Knowledge of SPS and core procedures, • Other tasks as assigned QUALIFICATIONS: • Bachelor’s degree in Mechanical / Manufacturing / Industrial Engineering or related field, • Minimum of 5 years related experience; or equivalent combination of education and experience, • Experience with working a low volume/high variation manufacturing operation, • Proven ability to handle multiple projects, meet deadlines, manage, and maintain budgets, • Self-motivated with the ability to prioritize work and stay on task, • Innovative team player, • Intermediate computer skills are required, • Proficient in Microsoft Office Suite (MS Word, Excel, MS Project, MS PowerPoint) and computer aided design systems (SolidWorks and AutoCAD preferred), • Good hands-on engineering skills and ability to work on production equipment, • Sound judgment with the ability to make timely, and sometimes difficult, decisions, • Ability to work with some direction and be effective in a fast-paced environment while being versatile, flexible, and willing to work within constantly changing priorities, • Able to: o Effectively prioritize and execute tasks in a high-pressure environment o Understand safety requirements and cautions • Strong: o Communication skills, verbal and written o Interpersonal skills o Organizational, problem-solving, and analytical skills \nCompany Description The Aebi Schmidt Group is a global leader in intelligent solutions for customers who care for clean and safe infrastructure and cultivate challenging grounds. At Aebi Schmidt USA, we are proud to offer a wide range of high-quality products designed specifically for your unique needs. Our global product brands bring you an exceptional variety of equipment for both summer and winter maintenance, airport operations, and agricultural technology. From sweepers and trailers to spreaders and snowplows, we have the equipment you need to tackle any challenge. Our dedicated workforce is committed to helping you achieve economic, safe, and efficient solutions that improve your performance and overcome any obstacle. Our mission at Aebi Schmidt Group is to go beyond individual projects and strive for total solutions. We believe in providing you with comprehensive and integrated systems that enable efficient and effective operations. Whether you’re behind the wheel of a snowplow truck in winter, cleaning the streets in summer, keeping airport runways clear, or hauling rental equipment on a trailer, we have a custom solution to help you overcome any challenge that the environment might throw at you. The Aebi Schmidt Group is a global leader in intelligent solutions for customers who care for clean and safe infrastructure and cultivate challenging grounds.\n\nAt Aebi Schmidt USA, we are proud to offer a wide range of high-quality products designed specifically for your unique needs. Our global product brands bring you an exceptional variety of equipment for both summer and winter maintenance, airport operations, and agricultural technology. From sweepers and trailers to spreaders and snowplows, we have the equipment you need to tackle any challenge. Our dedicated workforce is committed to helping you achieve economic, safe, and efficient solutions that improve your performance and overcome any obstacle.\n\nOur mission at Aebi Schmidt Group is to go beyond individual projects and strive for total solutions. We believe in providing you with comprehensive and integrated systems that enable efficient and effective operations. Whether you’re behind the wheel of a snowplow truck in winter, cleaning the streets in summer, keeping airport runways clear, or hauling rental equipment on a trailer, we have a custom solution to help you overcome any challenge that the environment might throw at you.

Job Description A Day in This Role You arrive to a clean, organized weld cell, review the day’s build list for stainless steel food-processing machinery, and pull the blueprints. You choose the right tungsten, filler, and shielding gas mix, set your parameters, and tack up frames and piping. By mid-morning, you’re laying down smooth, consistent TIG beads—flat, vertical, and overhead—on thin- and standard-gauge stainless, keeping a close eye on heat to avoid distortion. After lunch, you verify dimensions with calipers and squares, correct any misalignment, and complete final inspections so each assembly meets spec and looks impeccable. Before clocking out, you perform basic equipment maintenance, update your lead, and reset the area for the next shift. Schedule Monday–Thursday, four 10-hour shifts. What You’ll Handle • GTAW/TIG welding of stainless steel components and assemblies with a strong focus on appearance, quality, and repeatability., • Fabrication and welding of machinery frames, components, piping, and assemblies to blueprint and specification., • Set up and operate TIG equipment; select correct settings, tungsten, shielding gas, filler metals, and techniques for each job., • Weld in flat, vertical, overhead, and other positions as required., • Read and interpret blueprints, technical drawings, weld symbols, measurements, and specifications., • Fit, align, position, and secure stainless parts prior to welding., • Use precision tools—calipers, rulers, squares, straightedges—and other fabrication equipment for accurate layout., • Control heat input to prevent overheating, warping, distortion, and shrinkage., • Deliver clean, consistent, visually acceptable welds that meet quality standards., • Inspect completed welds and assemblies for defects, dimensional accuracy, and conformance., • Operate common hand and power tools used in welding/fabrication., • Perform basic maintenance and promptly report equipment or process issues., • Keep the work area safe, orderly, and compliant with company safety practices., • Follow all safety procedures, quality standards, and production requirements., • Communicate effectively with supervisors, leads, and teammates; meet production schedules., • Support additional fabrication and assembly tasks as needed. What You Bring, • 3–5 years of professional TIG/GTAW welding experience, specifically with stainless steel., • 3–5 years reading and interpreting blueprints/technical drawings., • Proven ability to produce clean, high-quality stainless TIG welds., • Hands-on fitting and fabrication experience., • Fluency with weld symbols, dimensions, tolerances, and fabrication specs., • Strong knowledge of welding equipment, hand tools, and power tools., • Ability to use precision measuring equipment accurately., • Exceptional attention to detail; quality-first mindset., • Works independently and as part of a production team., • Quick learner who adapts to changing production needs., • Clear communicator and effective problem solver., • Willing to work overtime and occasional weekends when required. Preferred Experience, • TIG welding 304 and/or 316 stainless steel., • Thin-gauge stainless work., • Sanitary/food-grade or appearance-critical stainless welding., • Stainless fabrication and machinery assembly., • GMAW/MIG welding experience in addition to TIG., • Working from detailed fabrication drawings and weld specifications., • Background in food-processing equipment, industrial machinery, pharmaceutical equipment, or precision stainless manufacturing. Physical & Work Environment, • Stand for extended periods; frequent walking, bending, kneeling, crawling, and reaching in varied positions., • Manufacturing environment with moderate to high noise., • Lift and/or move up to 60 pounds regularly., • Work safely around welding equipment, machinery, metal components, sparks, heat, fumes, and related hazards., • Proper PPE and strict adherence to safety procedures required. Your Toolkit, • Proficiency: Blueprint Reading, • Machines & Technologies: MIG Welder, TIG Welder About Express Employment Professionals Express Employment Professionals is one of the top staffing companies in the U.S. and Canada. Every day, we help people find jobs and provide workforce solutions to businesses. Express has more than 750 franchise locations that provide a full range of employment solutions that include full-time, temporary, and part-time employment in a wide range of positions, including professional, commercial, and administrative. Legal EOE/M/F/Vet/Disabilities

Job DescriptionTIG Welder – $25–$30/hour DOEKey Responsibilities: Perform TIG welding on stainless steel and various metals Read and interpret blueprints, drawings, and welding symbols Set up and operate TIG welding equipment and tools Inspect completed welds for quality, accuracy, and structural integrity Follow safety standards and proper welding procedures Assist in fabrication and assembly of metal parts as needed Requirements: Minimum 3+ years of TIG welding experience Proficient with stainless steel and thin-gauge materials Ability to read technical drawings and interpret welding symbols Strong attention to detail and quality control Must be able to lift up to 50 lbs and work in a physically demanding environment Reliable and punctual with a strong work ethic Willing to work overtime if necessary Maintain a clean and organized work area Collaborate with the team to meet production goals and deadlines #ZR

Job DescriptionHeavy Repairs Mechanic – PRS Auto Terminal (Kansas City, MO) Full-Time Recession-Proof Secure Career at the Norfolk Southern Kansas City Facility Ready to put your mechanical skills to work on some of the biggest, toughest machines on rails? Join a powerhouse team that's essential to America's transportation backbone—keeping thousands of railcars hauling freight and vehicles across the country safe, reliable, and rolling strong. This isn't just a job—it's a chance to master high-level structural and mechanical repairs on auto-rack and freight railcars, dive deep into underframe, draft systems, running gear, and air brakes, and become the go-to expert who ensures these giants stay in top shape. No above-deck prep here—just pure, hands-on heavy repairs that demand precision, skill, and pride in every weld and replacement. What You'll Tackle: (and Love Doing) • Restore and reinforce critical structural components: center sills, bolsters, cross bearers, and end-of-car setups—bringing battered railcars back to battle-ready condition., • Master the heart of railcar connectivity: inspect, service, and replace couplers, yokes, draft gear, and cushioning units that keep trains linked and moving smoothly., • Get hands-on with the rolling foundation: troubleshoot, repair, and rebuild truck assemblies, wheelsets, side frames, bolsters, and bearings for flawless performance., • Become an air brake specialist: service components and run full brake tests to meet the highest safety standards., • Flex your welding expertise daily using SMAW, FCAW, and GMAW—following precise procedures to deliver strong, code-compliant repairs., • Stay sharp and safe: adhere to FRA, AAR, and site protocols (including Blue Flag protection) while documenting your work like a pro with accurate work orders and AAR job codes.Who We're Looking For: (and What You'll Bring), • High school diploma or equivalent (technical training is a big plus!)., • 3+ years of solid experience in heavy railcar mechanical or structural repairs—you've already proven you can handle the tough stuff., • Deep knowledge of draft systems, running gear, and air brake systems (the more you know, the more you'll shine)., • Comfort reading repair standards/blueprints and using precision measuring tools., • Certified (or certifiable) welder in SMAW/FCAW/GMAW—your welds are rock-solid., • Solid understanding of FRA Parts 215, 218, 232 and AAR Interchange Rules., • Valid Driver’s License + ability to obtain and maintain required site credentials., • Drug test and Background check. Why This Opportunity Rocks:, • Competitive pay that rewards your expertise and experience., • Full benefits package to support you and your family., • Long-term career stability in a major railroad terminal—recession-proof work that's always in demand., • Join a tight-knit, dedicated team that lives by safety first and quality always—where your skills are respected and your contributions make a real difference every single day., • Work in the heart of the action at a key Norfolk Southern facility, surrounded by the sights, sounds, and scale of American railroading.You will be an employee of PRS Auto and will not be considered an employee of NS Railroad.

Job Description Are you looking for more than just a job—a place where your contributions make a real impact, and your success is shared with your team? At Cogent, Inc., an employee-owned company, we’re proud to offer exactly that. We’re seeking an enthusiastic, dependable, hardworking individual to join our team. If you're driven by a combination of problem-solving skills, and a desire to help others, this could be the perfect opportunity for you! This position is based out of our Riverside Missouri facility. What You’ll Do As a Fabrication Technician / Welder, you will play a mission-critical role in keeping our customers up and running! You’ll use your expertise, abilities, and problem-solving skills to fabricate and repair equipment to bring positive results for customers while maintaining the highest quality standards. Key Responsibilities: • Daily responsibilities will include but are not limited to reading and interpret blueprints or digital models., • Move steel with a forklift and overhead crane., • Cut material to size using a band saw, cutting torch or grinder., • Layout parts and prep material for welding., • Setup machines and weld carbon and stainless steels with GMAW, FCAW, SMAW, and GTAW processes., • Weld in all positions, • Pass various types of visual and nondestructive inspections on completed work, • Follow safety regulations and PPE requirements, • Maintain a neat and clean work area, • Must supply welding hood and hand tools, • Work alone or as a team, • Continuous learning of products, applications, technology, market conditions and competitive advantages. Skills & Qualifications Required: • High school diploma or GED, • Desire and ability to work in a fast paced and continuously changing field, • Ability to work overtime on short notice, • High level communication and organization skills, as well as a positive attitude towards customer service, • Solid basic computer knowledge, • Works well independently or with a team, • Ability to manually lift and maneuver heavy objects, parts, equipment and materials, • Ability to work under little supervision, • Customer-first attitude, • Ability to work outdoors under extreme weather conditions, • Adaptable and comfortable with changing environments and protocols, understanding other duties might be required Preferred: • Degree from a Technical or Vocational school in pipe and structural welding, • Previous experience in industrial construction or maintenance Why Work With Us? At Cogent, you’re not just an employee—you’re an owner. Our people make the difference, our shared values define us as a team and bring our vision to life. Together, our team of employee-owners is committed to helping build healthy and prosperous communities through creatively engineered solutions for our customers. We are a growing Midwest company that provides fluid processing solutions serving the local Industrial, Municipal, Commercial Building Trades, Oil and Gas markets through our family of trusted brands. We Offer • Employee Ownership (ESOP), • 401(k) with Company Match, • Profit Sharing, • Medical, Dental, Vision & Life Insurance, • Generous PTO, Paid Holidays & Volunteer Time Off, • Career Development & Advancement Opportunities, • A Culture That Values Innovation, Collaboration, and Respect Make Your Mark with Cogent This is more than just a job—it’s a chance to work in a company where your efforts are recognized, your voice is valued, and your professional growth is supported. As an employee-owner, you'll be part of a collaborative team that celebrates innovation, accountability, and shared success. Apply today and help us build something exceptional—together!

Job Description Certified Welder Needed – Join Our Dynamic Team and Make an Impact! Are you a skilled welder with a passion for precision and quality? We’re seeking a dedicated professional to join our team in this exciting role where your craftsmanship directly contributes to high-quality production. As a vital part of our operations, you'll perform MIG (GMAW) or TIG welding on sub-assemblies and finished products, ensuring every weld meets strict standards for strength and durability. This is your chance to work in a hands-on environment that values expertise, teamwork, and continuous improvement. Required Skills: • Ability to interpret work instructions and read prints, • Prior welding experience supporting production environments, • Strong communication, teamwork, and problem-solving skills, • Ability to work in a manufacturing environment and occasionally lift up to 50 lbsNice to Have Skills:, • Experience with air arc gouging on steel, • Welding to print specificationsPreferred Education and Experience:, • High school diploma or equivalent, • Related welding experience in a production settingOther Requirements:, • Ability to follow all safety, PPE, and quality system requirements, • Willingness to participate in team meetings and continuous improvement activities, • Ability to operate shop equipment such as forklifts and overhead cranes as neededSalary Range: $24 - $38 per hour, depending on experience If you’re ready to bring your expertise to a rewarding role that values your skillset and dedication, don’t wait — apply today and step into a career where your talent truly shines! Allied OneSource is connecting great people with great opportunities. #INDCOMMKC #ZR

Job Description Primary Function The Welder is responsible for producing high-quality welded pipe assemblies in a fast-paced fabrication environment. This role operates welding and fabrication equipment to weld outlets to pipe, perform rewelds as required, and ensure finished products meet company and industry quality standards. The Welder safely handles materials, follows established procedures, and contributes to on-time production while maintaining a clean and organized work area. Major Duties & Responsibilities • Operate automated welding and plasma equipment to weld outlets onto pipe in accordance with production specifications., • Perform manual rewelds using hand-held welding equipment as required to meet quality standards., • Load, position, and unload pipe from welding equipment using proper material handling techniques., • Inspect welded assemblies for quality and compliance with company and industry standards., • Apply required certification stamps to completed welds using designated tools., • Transfer finished pipe to carts and staging areas for downstream processing or shipment., • Operate pneumatic banding equipment to prepare finished pipe bundles for shipping when required., • Read work orders, production documents, and basic fabrication drawings to complete assigned work accurately., • Measure materials using tape measures and other measuring devices to verify dimensions and specifications., • Maintain production output while meeting quality and safety expectations., • Perform routine equipment checks and report maintenance or safety concerns promptly., • Keep work areas clean, organized, and compliant with housekeeping and safety standards., • Complete required safety, equipment, and operational training., • Follow all company policies, Standard Operating Procedures (SOPs), and quality requirements., • Support other fabrication, warehouse, or production activities as assigned by leadership. Qualifications • High school diploma or GED preferred., • Previous welding experience in a manufacturing, fabrication, or production environment preferred., • Ability to successfully complete company welding certification requirements., • Experience operating welding equipment, plasma equipment, or similar fabrication machinery is preferred., • Experience working in a fast-paced production environment with daily productivity goals., • Basic math skills, including whole numbers, fractions, and decimals., • Ability to accurately read a tape measure (minimum 1/4-inch increments; finer measurements preferred)., • Ability to read and follow work instructions, production orders, and standard operating procedures., • Forklift or overhead crane experience is a plus but not required. Physical Requirements • Frequently lift, carry, push, and pull materials weighing up to 50 pounds., • Stand, walk, bend, stoop, twist, and reach throughout the workday., • Perform repetitive hand and arm movements while operating welding equipment., • Work safely around welding equipment, moving machinery, and material handling equipment., • Ability to wear required personal protective equipment (PPE), including welding helmet, gloves, safety glasses, hearing protection, and steel-toed footwear. Preferred Skills • MIG welding experience (industrial or production welding preferred)., • Strong attention to detail and commitment to producing quality work., • Mechanical aptitude and ability to learn new equipment quickly., • Dependable with a strong work ethic and positive attitude., • Ability to work independently and as part of a team in a production environment., • Commitment to workplace safety, quality, and continuous improvement.

Job Description AES Manufacturing is looking for an experienced MIG Welder / Fabricator who can do more than just run a bead. We want someone who can read a print, fit and fabricate parts, solve problems, and take work from raw components to a quality welded assembly. AES builds safety products that help protect workers, so the quality of the weld and the accuracy of the finished assembly both matter. What You Will Do • Perform MIG welding on carbon steel, stainless steel, and other materials used in AES products as required., • Read fabrication drawings, blueprints, weld symbols, work orders, and sketches., • Measure, lay out, fit, tack, weld, grind, and finish fabricated assemblies., • Use fixtures, jigs, saws, grinders, hand tools, and other approved fabrication equipment safely., • Build repeat-production and custom fabricated components., • Inspect your own work for weld quality, fit, dimensions, and overall workmanship., • Troubleshoot fit-up, distortion, sequence, and fabrication problems., • Support robotic welding, fixture work, or other fabrication functions when qualified and needed., • Maintain a clean, safe, organized work area and meet production expectations without sacrificing quality What We Are Looking For • Strong MIG welding and metal fabrication ability., • Ability to read fabrication drawings and blueprints., • Ability to measure accurately, fit assemblies, and work independently after understanding the job., • Consistent weld quality and ownership of the finished product., • Practical problem-solving ability and willingness to accept feedback., • Reliable attendance and safe work habits. Experience That Helps • Two or more years of welding/fabrication experience preferred, or equivalent demonstrated ability., • Custom fabrication and fit-up experience., • TIG welding, stainless steel, fixtures, jigs, or robotic welding experience., • Forklift experience or certification. What AES Offers • Health, dental, and vision insurance., • Additional company-paid and voluntary benefits according to current AES plan terms., • Paid holidays and paid time off., • 401(k) with company match., • Full-time, year-round manufacturing work., • Opportunities to cross-train and grow into higher-skill manufacturing roles. Career Growth Strong welders can progress into advanced fabrication, robotic welding, senior welder/fabricator, training, fixture development, quality, or lead responsibilities based on demonstrated skill and business need. How We Hire Years of experience help, but they are not everything. Qualified candidates will tour AES and complete a practical welding/fabrication skills assessment.

Job DescriptionPipe Welder (6G Certified) Location: Riverside, Mo (North Kansas City) About the Job: We’re looking for an experienced Pipe Welder to join our team. The ideal candidate will have strong skills in 6G welding and experience working with carbon steel and stainless steel pipe. You’ll be responsible for producing high-quality welds, following blueprints, and maintaining a safe and organized work environment. Pay: $24/hour Schedule: Monday to Friday: 6:00 AM – 2:30 PM Overtime (as needed): up to 4:30 PM Occasional Saturdays may be required Key Responsibilities: Weld carbon steel pipe primarily using Flux Core Arc Welding (FCAW) Use Shielded Metal Arc Welding (SMAW) when FCAW cannot be used Perform stainless steel welds as required Ensure all welds are clean, inspected, and meet quality standards Apply welder stamps for traceability Follow blueprints and company welding procedures Complete and submit inspection and production records daily Maintain machine calibration and a clean, safe work area Report unsafe equipment and follow safety and company policies Use flame cutting equipment when instructed Skills & Qualifications: Certified in FCAW (Carbon Steel) and SMAW (Carbon Steel & Stainless Steel) MIG Aluminum Welding experience is an asset Able to read blueprints and safely operate hand/power tools Strong attention to detail and communication skills 5–10 years of experience in a pipe fabrication environment Additional Information: Candidates will participate in a hands-on interview, including a 6G weld test and blueprint reading assessment. How to Apply: Apply directly to this posting Or visit us in person: Walk in hours: 9am-11amor 1pm-3:30pm (Monday-Friday) LSI Staffing 1625 Swift St North Kansas City, MO 64116 You can also text us at 816-489-7850 to set up an appointment (please tell us what position you are interested in when texting us) or email your resume to lsinkc@lsistaffing.com (Please put the job you are applying for in the subject line) We look forward to hearing from you! PandoLogic. Keywords: Pipe Welder, Location: Kansas City, MO - 64108 , PL: 604092572

Job Description Welder Job Description: If you're looking for a job ASAP and you have Welding Experience then this is the position for you! A popular Fabrication Shop Company in Shawnee, KS is looking for Welders to join the team and to perform MIG welds. The company is looking for welders to start right away so Aerotek will provide a rapid interview process so you start work as soon as possible! Skills: Welding, Steel, Fabrication, MIG, Blueprints Experience Level: Entry Level to Mid-Level Location: Shawnee, KS Pay / Shift: $22 - $25 an hour 1st Shift Good Overtime is being offered! Apply right now and expect a call/text from Cole with Aerotek. Positions with this company will be filled quickly! Job Type & Location This is a Contract to Hire position based out of SHAWNEE MISSION, KS. Pay and Benefits The pay range for this position is $20.00 - $25.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in SHAWNEE MISSION,KS. Application Deadline This position is anticipated to close on Sep 22, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. \nCompany Description We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow. We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionMIG Fabrication Welder — Production Metals Location: Kansas City, KS Picture your week: four focused 10-hour days on the line, then three days to recharge. You’ll step onto a clean, organized production floor at a long-standing metal manufacturer known for stamping, fabrication, value-added assembly, tooling, and machining. From the first arc you strike to the final inspection, your craft shapes parts that meet exacting specs. Why You’ll Love It Here • 4-Day Week: Monday–Thursday, 10-hour shifts—built-in three-day weekends., • Day-One Perks: Holiday pay and 401(k) eligibility start your first day., • Quick Health Coverage: Medical, dental, and vision begin after 60 days., • Competitive Pay: Experience-based compensation, starting at $19/hr. A Day in the Life You’ll set up and run welding equipment to join and fabricate metal components to blueprint standards. Precision matters—from fit-up to final bead appearance. • Perform GMAW/MIG on carbon steel, stainless, and aluminum; support robotic and spot welding as needed., • Tack and weld assemblies using electric, gas, or arc processes., • Heat, form, and dress parts with hand tools, torches, or arc equipment to achieve clean finishes., • Dial in amperage, voltage, and wire feed for a stable arc and consistent penetration., • Guide the gun along the joint, evaluating bead by color, sound, and puddle behavior., • Position, clamp, and fixture workpieces for accurate fit-up., • Verify dimensions of finished parts with measuring tools., • Read and interpret prints, weld symbols, and specs to plan layout and weld sequence., • Operate supplementary machine shop equipment to prep components., • Follow all safety rules and PPE requirements at all times. What You’ll Bring, • High school diploma or GED., • 6–12 months of welding experience, vocational training, or metal fabrication shop experience., • Hands-on MIG proficiency across carbon steel, stainless, and aluminum (automated/robotic welding is a plus)., • Ability to read weld symbols and blueprints; speak and read English., • Personal hand tools., • Ability to lift 50 lbs. and stand for 10–12-hour shifts. Extra Details You should be proficient in: Blueprint Reading Machines & technologies you’ll use: MIG Welder Ready to Build Something Great? If clean, consistent welds and a three-day weekend sound like your kind of work-life balance, we’d love to connect.

Job Description Skilled Welder - Fabrication Welder Location: North Kansas City, MO Schedule: Monday–Friday, 7:00 AM–3:30 PM Job Type: Full-Time, In-Shop Job Summary An industry-leading, employee-owned company is building an in-house fabrication team and is looking for highly skilled, motivated welders to join the team in North Kansas City. This is a great opportunity for experienced welders who take pride in quality workmanship, want steady weekday hours, and are interested in being part of a growing fabrication operation from the ground up. The ideal candidate will have strong hands-on welding experience, a solid understanding of fabrication work, and the ability to produce high-quality welds in a shop environment. We are especially interested in candidates with pipe welding, TIG, stick, 6G, code welding, or fabrication experience, but we encourage skilled welders with related backgrounds to apply. Responsibilities • Perform high-quality welding and fabrication work in a shop environment, • Work with pipe, fittings, components, and fabricated assemblies as assigned, • Use welding processes such as TIG, stick, MIG, or other applicable methods based on experience and project needs, • Read and interpret drawings, measurements, layouts, and work instructions, • Prepare, fit, tack, and weld materials according to job requirements, • Inspect finished work for quality, accuracy, and appearance, • Maintain a clean, organized, and safe work area, • Follow company safety procedures and quality standards, • Work independently and as part of a growing fabrication team Qualifications • Prior welding or fabrication experience required, • Pipe welding, TIG, stick, 6G, code welding, or pressure piping experience preferred, • Ability to produce clean, consistent, high-quality welds, • Ability to read prints, drawings, tape measures, and basic layout information, • Comfortable working in a fabrication/shop environment, • Strong attention to detail and commitment to safety, • Reliable attendance and a team-oriented attitude, • Ability to complete a weld test as part of the hiring process Preferred Experience • Pipe welding or pipe fabrication, • TIG/GTAW and stick/SMAW welding, • Carbon steel welding, • 6G or other pipe welding qualifications, • ASME/code welding experience, • Spool fabrication or mechanical fabrication, • Fitting, layout, or assembly experience Why Apply? • Join an industry-leading employee-owned company, • Help build a new in-house fabrication team, • Steady Monday–Friday daytime schedule, • Opportunity for skilled welders to grow with the team, • Comprehensive benefit package inclusive of PTO, Holiday Pay, 401K, medical, dental, vision, and other insurance options, bonus opportunities, and opportunity to earn stock in the company #HP

Job Description Location: Kansas City, Missouri — shop near I-435 and Front Street Pay: $20.00–$30.00 per hour, based on demonstrated experience and ability Employment Type: Full-time Schedule: Monday–Friday, generally 8-hour shifts, with occasional overtime About CM Fabricating CM Fabricating is a veteran-owned, owner-operated metal fabrication company serving the Kansas City area. We fabricate and install light structural and miscellaneous steel and also provide in-house CNC cutting and powder coating. We are a hands-on, no-nonsense company that values craftsmanship, accountability, integrity, and people who take pride in doing the job correctly. Our employees get exposure to both shop fabrication and field installation rather than performing the same repetitive task every day. Position Overview We are looking for a dependable Welder/Fabricator who can also assist with steel erection and field installation. This is not strictly a shop-welding position. The work includes fabrication in our Kansas City shop as well as installation at construction sites throughout the Kansas City metro area. Applicants must be comfortable working outdoors, at heights, and in changing job-site conditions. Primary Responsibilities • Perform MIG/stick welding and fabrication of light structural and miscellaneous steel, • Read shop drawings, erection plans, dimensions, and weld symbols, • Lay out, fit, assemble, and weld fabricated steel components, • Verify measurements, squareness, and fit-up before welding, • Grind, clean, and prepare completed parts as required, • Bolt up, weld, and install structural and miscellaneous steel in the field, • Safely use ladders, lifts, fall-protection equipment, and common fabrication tools, • Assist with rigging, signaling, material handling, and crane-supported erection, • Load and unload steel, tools, and job-site equipment, • Maintain a clean, safe, and organized work area, • Be willing to learn CNC plasma operation, press-brake operation, and powder coating Qualifications • At least one year of welding or metal-fabrication experience preferred, • Steel erection, construction, or field-installation experience is a plus, • Ability to produce sound MIG/stick welds in multiple positions, • Ability to accurately use a tape measure and basic layout tools, • Ability to read shop drawings or a willingness to learn, • Comfortable working outdoors and at heights, • Physically capable of lifting and handling steel, tools, and equipment, • Reliable transportation to our Kansas City shop and local job sites, • Dependable attendance and ability to arrive ready to work, • Positive attitude and willingness to work as part of a crew, • Commitment to following job-site and shop safety requirements Pay Level Starting pay will be based on demonstrated ability—not just years of experience. The upper end of the pay range is intended for candidates who can independently: • Read drawings and complete layout, • Fit and weld accurately with limited supervision, • Perform clean, consistent MIG and stick welds in multiple positions, • Assist with rigging and steel erection, • Troubleshoot fit-up and field-installation problems, • Work productively without constant direction Selected applicants should be prepared to complete a practical weld and fit-up test. What We Offer • Consistent full-time work, • Shop and field experience, • Varied fabrication and installation projects, • Opportunities to learn CNC equipment, press-brake operation, and powder coating, • Occasional overtime opportunities, • Room to earn additional responsibility based on performance CM Fabricating is a veteran-owned, freedom-minded workplace. We value skilled tradespeople who work hard, think for themselves, take responsibility, and stand behind their work. To apply, submit your work history or résumé and briefly describe: • Your welding and fabrication experience, • Your experience reading shop drawings, • Any steel erection, rigging, lift, or field-installation experience, • The hourly pay you are seeking CM Fabricating is an equal opportunity employer. \nCompany Description CM Fabricating is a veteran-owned, owner-operated metal fabrication company serving the Kansas City area. We fabricate and install light structural and miscellaneous steel and also provide in-house CNC cutting and powder coating. We are a hands-on, no-nonsense company that values craftsmanship, accountability, integrity, and people who take pride in doing the job correctly. Our employees get exposure to both shop fabrication and field installation rather than performing the same repetitive task every day. CM Fabricating is a veteran-owned, owner-operated metal fabrication company serving the Kansas City area. We fabricate and install light structural and miscellaneous steel and also provide in-house CNC cutting and powder coating.\nWe are a hands-on, no-nonsense company that values craftsmanship, accountability, integrity, and people who take pride in doing the job correctly. Our employees get exposure to both shop fabrication and field installation rather than performing the same repetitive task every day.

Job Description Overview Tradesmen International is immediately hiring experienced Pipe Welders for projects located in the Kansas City, MO area. This is a first shift opportunity, and the pay rate is $30-33/hour based on experience and skill level. If you are a Welder and want to work alongside other proven craftsmen who emphasize safety, productivity, and superior craftsmanship, this is your chance to advance your career! Job Scope: • Assist with the layout, fabrication, and welding of carbon steel and stainless steel handrails and railing panels, • Work with tube, pipe, flat stock, expanded metal, and other mixed materials, • Produce high-end architectural railings, • Other tasks as assigned Responsibilities • Must have all PPE, welding gloves, and leathers Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Tradesmen+ Rewards Program – earn points for hours worked, • Vacation Pay, • Health insurance, • 401(k) retirement savings plan Tradesmen International is an EO employer - M/F/Veteran/Disability “Be Safe” from fraud! Tradesmen International will never ask you to pay for certifications, equipment, or other “up front” costs as a condition of hire. Similarly, we do not request pictures of documents or IDs to private phone numbers or email addresses. If in doubt, please call or visit your closest Tradesmen office to verify the request. Click here to visit Tradesmen’s full website.

Job Description Overview: we are actively hiring Welders to support production operations. This is an excellent opportunity for experienced welders seeking long-term stability, competitive pay, and growth within a well-established manufacturing environment Perform welding operations on metal components per work orders and specificationsWeld using MIG and/or TIG processes (depending on department needs)Read and interpret blueprints, weld symbols, and job instructionsInspect finished welds to ensure quality and compliance with standardsPerform basic grinding, fitting, and material preparationMaintain a clean and safe work areaFollow all safety, quality, and production procedures Skills and Experience: Previous welding experience in a manufacturing or industrial settingMIG and/or TIG welding experience preferredAbility to read blueprints and follow welding symbolsStrong attention to detail and qualityAbility to work in a fast-paced production environmentReliable attendance and strong work ethic Benefits: Don't miss this chance to enhance your experience in a production environment while enjoying competitive pay and a comprehensive benefits package. • Weekly pay, • $5 prescription drugs, • $5 doctor's visit copays, • Free teledoctor service, • Free counseling services, • Life insurance included, • Vision insurance included, • Dental insurance included, • Vacation and holiday pay, • Scholarship Opportunities, • 401(k) retirement plan, • Free legal services, • Our unbeatable employee discount programApply now so we can hold a spot for you. We can’t wait to talk to you! ––Your Ōnin team

Job DescriptionDescription: SUMMARY: This position is primarily responsible for layouts, fits, and welds fabricated, cast, and forged components to assemble structural forms such as tractor frames, tractor parts, and OEM parts for sale by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES: Core duties and responsibilities include the following. Other duties may be assigned. • Selects equipment and plans layout, assembly, and welding., • Layouts, positions, aligns, and fits components together., • Welding: Fluxcore, MIG, and some TIG, • Bolts, clamps, and tack-welds parts to secure in position for welding., • Setups equipment and welds parts, using arc, gas-shielded arc or gas welding equipment., • Monitors the welding, burning, and fitting process to ensure parts are not overheated or damaged by warping, distortion, expansion, or shrinkage., • Reads blueprints, • Repairs products by dismantling, straightening, reshaping, and reassembling parts., • Notifies supervisor when faulty equipment or defective materials are discovered., • Maintains, organizes, and cleans equipment and the work area. Requirements: EDUCATION AND/OR EXPERIENCE: High school diploma or general education degree (GED); or 2 years related experience and/or training; or equivalent combination of education and experience. PHYSICAL REQUIREMENTS: • Must be able to weld components that are vertical, flat, or overhead, as required., • Must have enough manual dexterity and stability as required for precision work., • Must be able to see details at close range., • Must be able to lift up to 35 pounds at times. REQUIRED SKILLS AND ABILITIES: • Thorough understanding of machines and tools used in welding including designs, uses, maintenance and repair., • Basic understanding of design techniques, principles, and tools necessary for the precise production of technical plans, drawings, models and blueprints., • Excellent ability to read and listen to assignments given in a variety of forms., • Basic understanding of mathematics as related to welding assignments., • Have excellent organizational, verbal and written communication skills., • Must have a professional, outgoing manner., • Must be detail-oriented and work effectively under pressure while meeting all applicable deadlines., • Must be able to work independently and productively with minimum supervision; work well under pressure; able to multitask manage multiple projects. OTHER QUALIFICATIONS: • Able to work a flexible schedule to include weekends and holidays., • Use of safety glasses, steel toed shoes, and other job-specific PPE required., • Must know MIG, TIG, Gas welding processes., • Minimum two to three years trade experience, • Must have reliable transportation.

Job Description Job Description: We are currently seeking a Welder/Fabricator for our railroad car repair department. Previous railroad experience is preferred but we will train the right individual !! A qualified candidate would preferably have a background in welding and metal fabrication / assembly. Our employees work with standard metal working equipment such as welders, grinders, torches, and various hand tools normally inside a shop setting. This position involves occasional travel and possible rotations onto a night shift. Night shift rotation is mandatory for all employees but shall not exceed 30 days 330 pm - 230 am 4 nights per week. Night shift pays an additional $.92 per hour and has 3-day weekends every weekend. Job Perks: • Pay up to $31.50 per hour, • Hourly base 40 hr/week ($60K) plus occasional overtime 10-20 hrs/week, • Generous company paid 401(k) retirement profit sharing, • Annual cash bonuses, • Benefit package includes health, dental, disability, vision, long and short term disability Job Duties: Fabricators will be given individual projects on a daily basis and are expected to work individually or with a partner depending on the given project. Expected to perform tasks with little to no direct supervision. Applicants MUST be available to take turns based on seniority and work up to a 30-day rotation on night shift 3:30pm-2:30am (4-10 hr nights) Monday - Thursday. If assigned to a night shift, this adds $.92 of shift differential pay. Job Qualifications: • Must be able to pass an in-house weld test and subsequently pass a company paid AWS certification within 30 days., • Most work is inside, but occasionally must be able to work outdoors in wet and cold (below freezing) weather., • Must have previous experience using metal working equipment., • This is strenuous work requiring good corrected vision, hearing, climbing, balancing, stooping, kneeling, reaching and lifting.

Job Description About PTS: Trusted, Responsive, and Nationwide Phillips Tank & Structure (PTS) is a growing, team-oriented, nationwide tank construction company with headquarters in Braddock, Pennsylvania, just outside of the City of Pittsburgh. We have over 190 employees and branch offices in Texas, California, Kentucky, and Hawaii. We specialize in designing, engineering, repairing, and constructing above-ground metal storage tanks and related structures, including welded tanks, bolted tanks, and geodesic domes. We have active projects in various industries, such as petroleum, power, chemical, and renewable fuels. At PTS, our commitment to our customers shapes everything we do. We have served companies across an array of industries, handling new tanks, repairs, and modifications. Our collective methodology, industry knowledge, and exhaustive range of abilities permit us to meet one-of-a-kind needs of our customers as they react to industry expectations. We believe in good quality and on-time delivery. We provide an excellent working relationship based on integrity and professionalism. Why Choose PTS? • Positive Work Culture: PTS employees experience a healthy blend of creativity, accountability, motivation, and improvement through team-based interactions with peers and other group members., • Professional Development: PTS is a growing company with many opportunities for advancement. PTS' systems-based approach to training and development helps employees quickly find the path to success in our company., • Intellectual Satisfaction: Being part of a team that executes unique and challenging projects throughout the country and actually builds something is an exciting endeavor. Our Core Principles • Service: The primary expectation for all employees at PTS is to focus on service. We are called to serve our customers as well as our co-workers and suppliers. We endeavor to build a cohesive team of employees who care about the well-being of the group., • Planning and Problem Solving: Planning and problem solving should be utilized to achieve productivity. We will strive every day to be organized and efficient in our approach. We will always look for better ways to achieve results rather than propagating inefficient or inaccurate methods., • Personal Development: Every employee should assist in the development of co-workers just as each employee should pursue their own personal development. Mentor and teammate relationships lay the groundwork for future growth and rewards. We are currently looking to hire a full-time Tank Builder / Welder (Nationwide) Day to Day Duties: • Performing arc and torch cutting and gouging., • Using generators, compressors, tuggers, blowers, grinders, and other power and air tools., • Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o’clock and “goat”/tractor)., • Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment., • Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment., • Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations., • Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment., • Operating forklifts, man lifts, boom lifts, and other large lifting equipment., • Knowledge of crane operations (including rigging and signaling), • Reading detailed erection and fabrication drawings., • Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks., • Completing job safety analysis, safety audits, site-specific training, and other safety training., • Follow directions and work professionally with other crew members., • Other duties as assigned. Requirements, • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development., • You’ll be part of a team where YOU matter To Apply: If interested, complete the job application from our website at www.phillipstank.com/careers. We are an Equal Employment Opportunity employer. Powered by JazzHR 0YI6uMTLil

Tradesmen International - - Responsibilities: Assist with the layout, fabrication, and welding of carbon steel and stainless steel handrails and railing panels; Work with tube, pipe, flat stock, expanded metal, and other mixed materials; Produce high-end architectural railings; Other tasks as assig

QPS Employment - - Responsibilities: Weld various metals including stainless steel and galvanized; Read tape measures, gauges, work orders, charts, and safety regulations; Cross-train on other departments; Perform safety checks and preventative maintenance on welding equipment and products; Read an

Aerotek - JobID: JP-005851904 [Fabricator] As a Welder at Aerotek, you'll: Require reading blueprints to determine locations and quantities of required materials; Fabricate metal parts such as steel and aluminum frames or beams; Perform other duties as assigned.

Republic Services - - Responsibilities: Weld steel and aluminum components using MIG and ARC welding; Fabricate steel components using brake and shear; Cut steel using plasma cutter or torch; Install lids and wheels on containers; Paint repaired containers.

We have an immediate opening for a Welder at our Riverside, MO facility. The welder will use welding techniques to build stainless steel food processing machinery, and use their knowledge of machines and tools, including designs, uses, repair, and maintenance. The welder will use their knowledge of

Successful applicant will conduct metal (primarily steel) fabrication and welding on a daily basis.Successful applicant will be responsible for various types of structural welding, including preparation, welding, and finishing operations.Applicant must be able to read, interpret, and understand deta

Abbey Mill Operator (Machine Operator).You may not know our name, but you know our products.What we make is part of the places where we live, work, and play all day, everyday.Zekelman is a family of companies 100% domestic manufacturers with a legacy dating back to 1877.We're proud to be the largest

Get fired up for welder jobs – apply today! Our local partners are looking for talented welders across manufacturing, production, and fabrication. Health benefits – real coverage for real welders. On the floor: prep materials and machines weld metal parts with high precision read blueprints and

Are you a skilled welder looking to advance your career with a company that values safety, quality, and professional growth? We're seeking a motivated Welder to join our dynamic team.

Job Description About us Amsted Rail has been in business for over 145 years as the #1 supplier of train wheels in not only America, but the entire world, that’s thousands of wheels each day! We also have locations all over the globe involved in producing almost every part you can think of that you can find under a railcar. We are also the 7th largest ESOP in the country. An ESOP is an employee stock ownership plan that gives workers ownership interest in the company in the form of shares, essentially our employees own the company. The company's success is your success. We have an immediate opening for a PLC / Electrician: Maintenance Technician at our Kansas City, KS facility. The open positions are for 2nd and 3rd shift, working 8-12 hour shifts, plenty of opportunity for overtime! The pay range is dependent on skills but currently ranges from $40.50 - $44.5 per hour. These positions actively support the operations of the facility. The goal of the position is to keep all mechanical and electrical systems in the assigned areas maintained and repaired. What will you do? • Work in a safe, controlled manner, • Maintain a positive attitude, • Work collaboratively in teams made up of maintenance, operations, quality, and management teammates, • Perform predictive/preventative maintenance, • Repair break downs, • Troubleshoot equipment malfunctions, • Assist the operations team as needed, • Complete projects as assigned SKILLS: • PLC Experience - Preferred, • Working knowledge of hydraulics, pneumatics, power transmission, and electrical equipment - Preferred, • Prior experience in industrial maintenance - Preferred, • Microsoft Office/SAP – Preferred, • Certified welder - Preferred Our environment: • Extreme heat and cold, • Dusty/dirty, • Loud Amsted Rail is an industry leader that can offer more than a chance to succeed. This is where you can thrive. Our environment is energetic, our people are motivated and our career paths can take you where you want to go. We pride ourselves on being the market leader as well as having a management philosophy that promotes a culture of dignity and respect for all our employees. For more than a century, Griffin® has been the proven leader in railroad wheel quality, design, and service. We have five wheel plants – four in the US and one in Canada. We offer a comprehensive benefits package that includes medical, dental, vision, life, and disability insurance as well as a retirement 401k and ESOP employee stock ownership program (100% employee-owned). Amsted Rail’s Equal Opportunity Statement: Amsted Rail is an Equal Opportunity employer. All applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. To review our EEO Policies or to request assistance please go to www.amstedrail.com/careers/ and select EEO Compliance/Statements. To learn more about us, please visit us online at www.amstedrail.com. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities and any other basis covered by federal, state, or local law. #ff-dd

Job Description About us Amsted Rail has been in business for over 145 years as the #1 supplier of train wheels in not only America, but the entire world, that’s thousands of wheels each day! We also have locations all over the globe involved in producing almost every part you can think of that you can find under a railcar. We are also the 7th largest ESOP in the country. An ESOP is an employee stock ownership plan that gives workers ownership interest in the company in the form of shares, essentially our employees own the company. The company's success is your success. We have an immediate opening for a PLC / Electrician: Maintenance Technician at our Kansas City, KS facility. The open positions are for 2nd and 3rd shift, working 8-12 hour shifts, plenty of opportunity for overtime! The pay range is dependent on skills but currently ranges from $40.50 - $44.5 per hour. These positions actively support the operations of the facility. The goal of the position is to keep all mechanical and electrical systems in the assigned areas maintained and repaired. What will you do? • Work in a safe, controlled manner, • Maintain a positive attitude, • Work collaboratively in teams made up of maintenance, operations, quality, and management teammates, • Perform predictive/preventative maintenance, • Repair break downs, • Troubleshoot equipment malfunctions, • Assist the operations team as needed, • Complete projects as assigned SKILLS: • PLC Experience - Preferred, • Working knowledge of hydraulics, pneumatics, power transmission, and electrical equipment - Preferred, • Prior experience in industrial maintenance - Preferred, • Microsoft Office/SAP – Preferred, • Certified welder - Preferred Our environment: • Extreme heat and cold, • Dusty/dirty, • Loud Amsted Rail is an industry leader that can offer more than a chance to succeed. This is where you can thrive. Our environment is energetic, our people are motivated and our career paths can take you where you want to go. We pride ourselves on being the market leader as well as having a management philosophy that promotes a culture of dignity and respect for all our employees. For more than a century, Griffin® has been the proven leader in railroad wheel quality, design, and service. We have five wheel plants – four in the US and one in Canada. We offer a comprehensive benefits package that includes medical, dental, vision, life, and disability insurance as well as a retirement 401k and ESOP employee stock ownership program (100% employee-owned). Amsted Rail’s Equal Opportunity Statement: Amsted Rail is an Equal Opportunity employer. All applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. To review our EEO Policies or to request assistance please go to www.amstedrail.com/careers/ and select EEO Compliance/Statements. To learn more about us, please visit us online at www.amstedrail.com. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities and any other basis covered by federal, state, or local law. #ff-dd

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom.We are professionals in Industrial Maintenance and we make factories run better.Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido.Somos profesionales

Maintenance Technician - 3rd Shift.This person will be required to be on 24-hour call.Our client has been a leading source of plastics manufacturing, supplying the automotive industry for over 40 years through highly technical research and development, coupled with a diverse and knowledgeable Manage

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom.We are professionals in Industrial Maintenance and we make factories run better.Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido.Somos profesionales

The Housing Authority of Kansas City, Missouri is seeking qualified candidates for the position of Maintenance Mechanic I.Our Maintenance Mechanic I's are responsible for semi-skilled to skilled maintenance of buildings, facilities, and light equipment.Performs general carpentry, electrical, plumbin

O'Reilly Automotive - - Responsibilities: Receive, unload, inspect, sort, stock, pick, pack, stage, and ship merchandise; Operate RF scanners, handheld devices, and WMS; Maintain inventory accuracy; Load and unload trailers and route trucks; Identify unsafe conditions and report to leadership.

The Housing Authority of Kansas City, Missouri is seeking qualified candidates for the position of Apartment Maintenance Mechanic II.Our Apartment Maintenance Mechanic II's are responsible for skilled maintenance of buildings, facilities, grounds, and light equipment.Performs carpentry, electrical,

QPS Employment - - Responsibilities: Operate hand tools, power tools, cranes, forklifts and material-handling equipment; Read mechanical drawings and assembly prints; Collaborate with fabrication, welding, and quality teams; Inspect assemblies for quality and workmanship; Maintain a clean, organized

Aerotek - - Responsibilities: Assemble stainless steel laboratory equipment and components; Read engineering drawings, wiring schematics, blueprints; Inspect and test assembled products for quality; Troubleshoot assembly issues with limited assistance; Lift and move 50-75 pounds safely.

As an assembly technician, you will work within production lines alongside fellow technicians.You'll report to production supervisors and leads who guide your work and monitor efficiency.Quality control, safety coordinators, maintenance technicians, and engineering teams will also interact with you

Aerotek - - Responsibilities: Assemble Ford Transit shelving and components; Read blueprints and diagrams for placement; Use hand and power tools to complete tasks; Work in underground automotive upfitting facility; Collaborate with 10+ assemblers to meet daily outputs.

Aerotek - - Responsibilities: Assemble and tear down heavy-duty electric trucks following work instructions; Use engineering drawings and instructions to complete assembly tasks; Inspect your work and identify and correct defects; Follow all quality and safety procedures; Work closely with team memb

FedEx - - Responsibilities: Operate equipment safely to move packages; Assist pallet buildup/breakdown of heavyweight freight; Serve as liaison with ULD repair vendor; Complete basic and recurrent training; Communicate effectively in a noisy environment.

QPS Employment - - Responsibilities: Perform mechanical assembly of piping components and systems (2”–36”); Conduct in-process inspections for dimensional accuracy; Maintain inspection/production records; Use Medix to interpret job packets; Collaborate with line leads and supervisors to resol

Boise Cascade - - Responsibilities: Assemble interior and exterior doors; Operate machine centers as needed; Verify accuracy of work orders to materials; Inspect materials for defects and quality; Maintain clean working area.

Mars, Incorporated - - Responsibilities: Receive inbound materials and packaging; Operate forklift to move materials; Stage and load outbound trailers; Maintain inventory accuracy and perform cycle counts; Adhere to GMP and food safety requirements.