Trabajos inspection engineer en Reino Unido - Page 4

Day Supervisor – Electrical Bias (Building Services / Smart Building Fit-Out) London Full-Time | Temporary (with potential for permanency) Role Overview We are seeking an experienced Day Supervisor (Electrical Bias) to support the fit-out, commissioning, and mobilisation of a new state-of-the-art corporate headquarters in London. This is initially a temporary position with strong potential to become permanent, offering a unique opportunity to be involved from early-stage fit-out through to full operational readiness and steady-state operations. You will play a key role in managing safe electrical isolations, LV switching, and Permit to Work (PTW) systems, while supporting contractors and engineering teams in a highly advanced, smart building environment. The Building This next-generation corporate headquarters features industry-leading smart building technologies, including: • Fully integrated BIM (Building Information Modelling) systems - Digital concierge and client service platforms - A fully connected, data-driven building environment - Designed for efficiency, resilience, sustainability, and user experience Key Responsibilities Supervisory & Operational Duties • Act as Day Supervisor, overseeing daily site operations and contractor activity - Perform safe LV electrical isolations and reinstatements to support fit-out works - Issue, manage, and close Permits to Work (PTW) in line with procedures - Coordinate with contractors, engineering teams, Permit Manager, and stakeholders - Support fit-out works including isolations, connections, access control, and supervision Mobilisation & Transition Support • Participate in Soft Landings, training, and system familiarisation - Support development of operational processes and building readiness - Witness and support commissioning activities - Assist with handover documentation and operational transition - Support engineering teams during low-activity project phases Operations & Maintenance • Use digital FM systems (CAFM / PDA / smart platforms) for job management - Raise, track, and close maintenance tasks accurately - Maintain permit logs, maintenance records, and compliance documentation - Support fault diagnosis and root cause analysis reporting - Produce technical documentation for engineering leadership teams Continuous Improvement & Safety • Promote safe systems of work and high-quality standards - Identify opportunities for process improvement and efficiency gains - Support a strong health, safety, and compliance culture - Contribute to team performance and operational excellence Skills & Experience Essential – Technical Experience • Experience as a Building Services Engineer (Electrical Bias) - Background in critical environments (e.g. corporate HQ, banking, data centres), • Strong experience with:, • Permit to Work (PTW) systems - Electrical isolations and LV switching, • Good understanding of HVAC and building services systems - Experience with HV switching operations (11kV–33kV) Qualifications • HV switching qualification or proven HV operational experience (up to 33kV) - City & Guilds Electrical qualifications (or recognised apprenticeship) - 18th Edition Wiring Regulations (BS 7671) - C&G 2391 Inspection & Testing - ACoP L8 Water Hygiene certification - IOSH qualification (or equivalent) - Willingness to become LV Authorised Person (LVAP) on site Technical Knowledge • BMS (Building Management Systems) and controls - HVAC systems (chillers, AHUs, FCUs, VAVs) - LTHW heating systems and boilers - Life safety systems (fire alarms, suppression, etc.) - LV distribution (400V systems) - UPS and 2N power architectures - STS / ATS systems and standby generators - Smart building systems, IoT, and integrated digital platforms - Energy management and optimisation principles Personal Attributes • Self-motivated, flexible, and eager to learn - Calm and effective under pressure - Strong communication and client-facing skills - Proactive, solutions-focused mindset - Comfortable working independently and in multidisciplinary teams - Flexible approach to working patterns, including occasional weekend support Core Competencies • Leads by example and maintains high standards - Strong commitment to safety, compliance, and quality - Excellent organisational and coordination skills - Confident user of digital FM / CAFM systems - Proven experience in critical environments and HV operations

Design Technician (Control Panels / EPLAN) £35,000 - £42,000 + Training + Progression + Bonus + Enhanced Holidays + Company Benefits Herefordshire Are you a Design Engineer with Control Panel and EPLAN experience, looking to join a well-established and growing engineering business that will provide training, progression, and long-term career development? You will be responsible for designing electrical control panels to customer and industry standards, producing detailed documentation using EPLAN, and supporting projects from concept through to testing and commissioning. This is a varied role with both office-based design work and occasional site involvement. The company is a respected specialist in control panel design and manufacturing, with strong growth plans and a steady pipeline of projects. You will be part of a close-knit team, with opportunities to expand your technical skillset and progress your career. This role would suit an Electrical Design Engineer or Control Panel Designer who enjoys hands-on involvement, technical problem solving, and working on end-to-end engineering projects. The Role: Design control panels in line with customer and industry standards * Produce schematics and documentation using EPLAN * Support testing, inspection, and commissioning activities * Assist with Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) * Provide technical support across the wider business * Occasional UK travel and overnight stays The Person: Electrical Engineering qualification (Level 3 or above) * Experience with EPLAN or similar CAD software * Understanding of electrical systems, components, and circuits * Full UK driving licence If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. Reference Number: BBBH24533a Keywords: Control Panel Design Engineer, Electrical Design Engineer, EPLAN, Control Panels, MCC, Electrical Schematics, Panel Design, Automation, PLC, Wiring Diagrams, Electrical Systems, Process Engineering, Water Industry, Wastewater, FAT, SAT, Commissioning We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

Job title: Mechanical and Electrical Engineer (including HVAC and Water Hygiene) Location: Head Office, Regent Street, London Responsible to: Senior Account Manager Capital Maintenance is a family business with over thirty-five years of experience in the maintenance industry. After an acquisition in 2024 the company now forms part of the Sasse Group, a renowned international total FM organisation headquartered in Munich, Germany. Based in Central London, we are passionate, dedicated, trustworthy, and caring. We believe that this allows everyone to fulfil their potential and enjoy the work they do, creating a great work ethic and team culture. The services we offer are catered to our clients needs, with skilled engineers and a dedicated range of departments covering all disciplines in the industry. This combined means our clients are always supported to the highest achievable standard. OUR VISION | MISSION | VALUES STATEMENT VISION Sasse Group will continue to be a family-led company and a reliable business partner in the future. The image of our company shall be characterized by the terms professional and innovative and respectable and consistent. MISSION We identify ourselves with our clients individual needs. Through innovative solutions, we create value for our clients. Our ultimate goal is high customer satisfaction, achieved through Service Excellence. VALUES Our conviction of thinking and acting in a sustainable manner is reflected in our responsibility towards the state, towards society and towards the environment. Based on this responsibility, we regard it as our duty as a company to contribute to our countrys economic and social progress. Mutual respect and responsible interaction with our valued employees lie at the very core of our actions and beliefs. About the Job: We are looking for a M&E Engineer to join the M&E Division of our Property Services Department, providing a multi-skilled maintenance service, that will include Mechanical & Electrical, HVAC and Water Hygiene services. This is an excellent opportunity for an experienced M&E Engineer looking to step into a Lead role. A fantastic chance for a driven professional ready to take on more responsibility within a well-established Facilities Management FM company. In this role you will play a key part in managing maintenance operations for a prestigious high-profile site in West London while you will still have a hands-on approach to PPM Planned Preventative Maintenance and reactive maintenance. You will also take on leadership duties managing a team, overseeing performance metrics and ensuring contract compliance. Duties will include but not limited to: Lead and manage a team of engineers and contractors ensuring top-tier service delivery Support PPM and reactive maintenance when needed ensuring smooth efficient building operations (including emergency lighting testing & remedials, PAT testing, water sampling,plumbing & water treatment remedial, servicing, diagnosing & inspection of AC, HVAC & water systems,) Track KPIs and SLAs proactively addressing any service issues Enforcing and preparing Risk Assessments, Method Statements, RAMs and maintain full regulatory compliance Conduct regular audits and inspections ensuring maintenance aligns with best practices and safety standards and implementing safe working practices Serve as a key technical contact providing guidance to both your team and the clients on-site leadership Production of quotes and estimates including correct parts and labour times Using the Simpro system to complete job sheets, carry out quotes and provide certifications Ordering and sourcing materials This is a mobile role Required qualifications and experience: NVQ Level 3 or higher in Electrical or Mechanical Engineering Experience within a Maintenance / Facilities Management environment Previous experience and proven background within Mechanical & Electrical servicing & maintenance with supervisory or leadership responsibilities Health and Safety expertise and knowledge of compliance, RAMs and industry regulations Leadership ability, confident in managing teams problem-solving and driving operational success Capability to perform manual tasks, including manual handling, working at heights and in confined spaces General maintenance including basic plumbing, carpentry and electrical works Full Driving Licence (not essential) Good customer service skills Previous use of handheld technology and email Job type: Permanent and Full Time Date: March 2026 Salary: £45,000 - £50,000 per annum The Company reserves the right to vary or amend the duties and responsibilities of the post holder at any time according to the needs of the Companys business. REF-227 830 TPBN1_UKTJ

Overview We are recruiting a Shift Leader – Engineering Services to oversee the delivery of maintenance and operations across a critical building services environment. This role combines hands-on Electrical & Mechanical (M&E) expertise with team leadership, operational control, and compliance management. You will be responsible for maintaining 100% uptime, system reliability, and safety standards, while coordinating engineers, contractors, and Specialist Service Providers (SSPs). This is an excellent opportunity for a Lead Engineer or Supervisor looking to step into a key leadership role within a high-performance, safety-critical environment. Key Responsibilities Operations & Engineering Control • Maintain uptime and operational performance across all critical building systems - Operate, monitor, and carry out fault finding on M&E systems - Supervise Planned Preventative Maintenance (PPM) and reactive maintenance - Allocate and manage tasks via CMMS / CAFM systems - Maintain accurate asset registers, plant records, and maintenance documentation - Inspect completed works prior to permit closure and job sign-off - Deliver detailed shift handovers covering plant status, risks, isolations, and ongoing works - Provide shift cover for sickness and holidays as required Permit to Work (PTW) & Compliance • Manage and control the Permit to Work (PTW) system and Safe Systems of Work (SSOW) - Review and approve RAMS (Risk Assessments & Method Statements) - Ensure full compliance with Health & Safety legislation and company policies - Coordinate, issue, and close permits, escalating risks where necessary - Conduct site inductions and maintain compliance records - Monitor contractor performance against SLAs and safety standards Specialist Contractor Management • Coordinate and oversee all Specialist Service Providers (SSPs) - Ensure all SOPs, RAMS, and PTWs are in place prior to work commencement - Inspect and sign off completed works and documentation - Escalate technical issues, performance concerns, and compliance risks - Ensure contractors operate safely and in line with site procedures Quality Assurance & Housekeeping • Maintain QA standards for tools, PPE, ladders, and lifting equipment - Ensure all inspection logs are accurate and audit-ready - Monitor plant rooms and critical areas for cleanliness and operational integrity - Maintain high standards across workshops, storage areas, and site facilities Projects & Site Works • Oversee small works, refurbishments, and site changes - Liaise with contractors to ensure safe, compliant project delivery - Support operational changes across front-of-house and shared spaces Systems & Equipment Hands-on operational knowledge and fault finding across: • Building Management Systems (BMS) - Lighting control systems - HVAC systems (AHUs, FCUs, chilled beams) - Boilers and heating systems - Motors (single & three-phase) - UPS systems and critical power infrastructure - Emergency lighting systems - Generators and static switches - Water treatment and refrigeration systems Skills & Experience Essential • Minimum 10 years’ experience in Building Services / Facilities Management - City & Guilds 2360 (Parts 1 & 2) or equivalent - 18th Edition Wiring Regulations - Strong technical knowledge of electrical and mechanical systems - Proven experience leading or supervising engineering teams - Strong understanding of PTW, RAMS, and compliance processes - Excellent communication and stakeholder management skills - Good IT skills, including CMMS / CAFM systems and reporting tools - Professional, reliable, and safety-focused approach Desirable • City & Guilds 2391 Test & Inspection - Experience in critical environments (data centres, high-end commercial sites) - Candidates with strong leadership potential may be considered with training provided Candidate Profile • Proactive, detail-oriented, and solutions-focused - Calm and decisive under pressure, particularly during critical incidents - Strong leadership and team coordination skills - High standards of quality, safety, and professionalism - Committed to continuous improvement and development Why Join Us? • Take on a key leadership role within a critical facilities environment - Work with advanced M&E systems and infrastructure - Join a high-performing, safety-first engineering team - Access ongoing training, development, and career progression - Be part of a stable, long-term, and technically challenging environment Why this version performs better • Strong keyword optimisation: “Shift Leader”, “Engineering Services”, “M&E”, “Critical Facilities”, “BMS”, “PPM”, “PTW”, “CMMS” - Clear structure for ATS systems and recruiter scanning - Balanced focus on technical ability, leadership, and compliance - Targets both experienced supervisors and step-up lead engineers

Foot Mobile Maintenance Engineer Reporting to: Contract Supervisor, Contract Administrator, Contract Manager Working closely with: Mobile Engineering Team Purpose of the Role As a Foot Mobile Maintenance Engineer, you will be responsible for delivering both planned and reactive maintenance across client sites, supporting the Contract Supervisor and wider management team. The purpose of the role is to ensure the client’s mechanical and electrical assets are maintained in a safe, efficient, and fully operational condition. You’ll be well organised, able to work to agreed timescales, respond effectively to emergency situations, and operate confidently both independently and as part of a mobile engineering team. Key Responsibilities Carry out planned preventative maintenance (PPM) and reactive works on mechanical and electrical systems Maintain plant, equipment, and associated components in good working order Review and monitor subcontractor performance during specialist service visits and repair works Complete simPRO instruction sets accurately, including photographic evidence for completed tasks Maintain site logbooks and compliance records for electrical, mechanical, water systems, and health & safety Escalate any issues relating to statutory planned maintenance to the Supervisor or Management team Maintain comfortable environmental conditions through effective operation of HVAC systems Respond to plant and equipment failures, carrying out fault finding on mechanical and electrical systems Respond to BMS alarms and use the system for first-line diagnostics Identify and report potential hazards or safety concerns promptly Maintain full operational knowledge of all plant and services, including: Plant start-up and shutdown (normal and emergency) Running checks and plant changeover Fault finding and optimisation of plant run times Carry out regular housekeeping and site walk-rounds to ensure: Plant rooms are clean and tidy No health and safety risks are present Plant is operating in line with building specifications Liaise professionally and courteously with clients, end users, and colleagues Complete maintenance, repairs, and small installation works as directed Maintain accurate documentation including test reports and service reports Keep Business Support and Supervisors informed of work progress and any delays Communicate the impact of maintenance or repair works prior to execution Share knowledge and skills to support safe and continuous site operations Immediately escalate any real or potential risks to personnel safety or critical plant reliability Isolate and make safe electrical and pressure systems, confirming dead / de-pressurised where required Be flexible to support business needs, including occasional evening, weekend, or public holiday working Undertake any other reasonable duties required under the contract Knowledge, Skills & Experience Essential City & Guilds Level III (or equivalent) in Electrical discipline City & Guilds Level III (or equivalent) in Mechanical discipline 18th Edition I.E.E Strong understanding of Electricity at Work Regulations and safe working practices Proven experience in maintenance, testing, and fault finding across building services systems Desirable City & Guilds BS 2391 Level 3 – Electrical Inspection & Testing IOSH Working Safely PASMA and IPAF (1b / 3a / 3b) Unvented hot water systems training Experience with BMS, generators, controls, lighting, plumbing, drainage, LPHW, pressurisation, ventilation, ACOP L8 and cooling tower systems High Voltage systems experience with valid certification Behavioural Competencies Customer-focused with a flexible working approach Strong written and verbal communication skills Collaborative team player who supports colleagues when needed Able to prioritise and perform effectively in high-pressure, business-critical environments Confidentiality You may have access to confidential or sensitive information in the course of your role. All such information must be treated as strictly confidential and handled in accordance with company policies and data protection requirements

Electrical Maintenance Engineer – FM Service Provider – Foot Mobile Zones 1 & 2, London Portfolio | Up to £47,500 per annum An excellent opportunity to join a well-established, family-run Facilities Management service provider with a strong presence across Central London. CBW Staffing Solutions is recruiting on their behalf for an experienced Electrical Maintenance Engineer to manage a diverse portfolio of approximately 30 commercial buildings across Zones 1 & 2. This is a foot mobile role involving travel between multiple sites, delivering planned preventative maintenance (PPM) and reactive maintenance with a primary focus on electrical systems. The ideal candidate will hold a recognised electrical qualification (C&G / NVQ) and bring a proven track record in commercial building maintenance, installation, and testing & inspection. In return, you'll receive a competitive salary of up to £47,500, a Zones 1 & 2 travel card, excellent overtime opportunities, and genuine progression pathways — including support towards Qualifying Supervisor (QS) status. Hours of Work Monday to Friday | 08:00 – 17:00 Key Duties & Responsibilities Carry out planned preventative maintenance (PPM) and reactive maintenance across multiple commercial sites Maintain and test emergency lighting and fire alarm systems Complete electrical remedial works and small electrical installations Service and maintain AHUs and FCUs, including filter changes and cleaning Monitor BMS systems and conduct hot & cold checks Keep all logbooks and compliance records accurate and up to date Escort and supervise specialist subcontractors Collaborate with and support fellow engineers across the portfolio Provide technical guidance and support as requiredThis is a predominantly electrical role with minimal plumbing and fabric duties. Package Salary up to £47,500 (dependent on experience and qualifications) Zones 1 & 2 travelcard provided PDA device provided 20 days annual leave + bank holidays Overtime available Ongoing training and development, including progression to QS Contributory pension schemeRequirements Electrically qualified – City & Guilds / NVQ Level 2 & 3 17th or 18th Edition wiring regulations JIB Gold Card holder 2391 Test & Inspection (desirable) Proven experience in commercial building maintenance Strong knowledge of building services Multi-skilled with excellent communication and customer-facing skills Comfortable working in a foot mobile, multi-site environment Ability to provide copies of all relevant trade certificatesTo apply, please send your CV to Dan Barber at CBW Staffing Solutions for a confidential conversation

Quality Manager – CNC Machining / Aerospace – £60,000 Location: Watford, Hertfordshire Full-Time, Permanent Salary: Circa £60,000 Hours: Monday–Thursday 7:45–16:45, Friday 7:45–12:45 The Opportunity A well-established and growing subcontract precision engineering business is seeking a Quality Manager to lead its quality function. The company supplies high-precision CNC machined components into highly regulated sectors, including aerospace and defence, and is looking for a hands-on leader to drive quality standards, improve systems, and embed a right-first-time culture across the shopfloor. You will take full ownership of Quality and lead a small team of: Quality Engineer Goods In / Out Inspector Inspector The Role This is a key leadership position within the business, responsible for maintaining and developing the Quality Management System while acting as the escalation point for all quality-related matters. You will be highly visible across the operation, working closely with Production and Engineering to ensure processes are robust, repeatable, and aligned to customer and regulatory requirements. Key Responsibilities Lead and continuously improve the Quality Management System in line with AS9100/ISO standards Manage internal, customer, and third-party audits, ensuring effective and timely close-out of actions Act as the escalation point for non-conformances, leading root cause analysis (8D, 5 Why, Fishbone) and corrective actions Oversee all inspection and verification activities, including FAIRs, production inspection, and CMM/metrology capability Implement and drive key quality metrics including scrap, rework, customer returns, and OTIF performance Manage supplier quality, ensuring compliance, traceability, and flow-down of requirements Maintain robust document control and quality record systems Work cross-functionally to ensure manufacturing processes are stable, measurable, and repeatable Drive continuous improvement and introduce more effective, data-driven and digital quality processes Promote a strong quality culture through leadership, coaching, and shopfloor engagement About You Proven experience as a Quality Manager within CNC machining or precision engineering Strong knowledge of FAIR/FAI, traceability, non-conformance systems, and metrology Able to read and interpret engineering drawings and GD&T Experience working within AS9100 or similarly regulated environments Confident communicator, able to engage with shopfloor teams, customers, and auditors Hands-on, pragmatic approach with a focus on continuous improvement Desirable Lead or Internal Auditor qualification (ISO9001 / AS9100) Engineering qualification (HNC / HND / Degree) Experience with Lean or Six Sigma Background in aerospace, defence, or other regulated industries Why Apply Senior role with full ownership of the quality function Stable SME environment with strong industry positioning Opportunity to make a visible impact and drive improvements Close-knit team with real autonomy Early finish every Friday If you are a hands-on Quality Manager looking for a role where you can genuinely influence standards, systems, and culture, apply now. TPBN1_UKTJ

Industrial Electrician (Industrial / Water) £50,000 - £55,000 + Overtime + Bonus + Training + Progression + Enhanced Holidays + Company Benefits Herefordshire (Site-Based / Nationwide Travel) Are you an Approved Electrician looking to join a well-established and growing engineering business, offering excellent earning potential, nationwide project work, and long-term career progression? You will be working on the installation of LV and ELV electrical systems across a range of industrial sites, including water and wastewater projects. This is a hands-on role involving cable installation, containment, and working from technical drawings, with regular travel and overnight stays required. The company is a highly respected electrical engineering specialist with a strong reputation in the industry and a growing pipeline of projects. They offer ongoing training, development, and the opportunity to progress into supervisory roles. This role would suit an Approved Electrician who enjoys site-based work, nationwide projects, and being part of a skilled engineering team delivering high-quality installations. The Role: Install LV and ELV electrical systems on industrial sites * Work from electrical drawings, schematics, and wiring diagrams * Carry out cable containment and armoured cable installations * Travel nationwide with regular overnight stays * Work closely with engineers and site teams to deliver projects * Maintain high standards of health & safety on site The Person: Approved Electrician with 2391 Inspection & Testing (or equivalent) * Experience in industrial or utilities environments * Full UK driving licence If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. Reference Number: BBBH24548a Keywords: Approved Electrician, Industrial Electrician, Installation Electrician, Electrical Installation, LV, ELV, Water Industry, Wastewater, Utilities, Electrical Engineer, Site Electrician, Cable Installation, Containment, Inspection and Testing We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

The Role The Security Proxy Engineer (Mid Level) is responsible for the implementation, operation, and optimization of the enterprise proxy infrastructure that enables secure access to internal and third party services. This role supports proxy performance, resiliency, identity aware routing, consistent traffic inspection, and controlled egress IPskey enablers of regulatory compliance, security controls (encryption and inspection), and user productivity at scale. The engineer works within established proxy architecture standards, independently handling operational tasks and troubleshooting, while collaborating with senior engineers and architects on complex designs and large scale initiatives. Your responsibilities: Implement, configure, and maintain enterprise proxy and secure web gateway services under defined standards. Manage proxy policies for web access control, traffic inspection, TLS decryption, and egress IP enforcement. Execute routine operational tasks including configuration changes, upgrades, patching, and vendor recommended updates. Monitor proxy service health, availability, and performance, identifying and resolving user impacting issues. Perform root cause analysis for proxy related incidents and participate in incident response and post incident reviews. Assist with capacity planning and resiliency testing activities, escalating risks when thresholds are approached. Ensure proxy configurations consistently enforce security policies aligned with organizational standards. Support compliance activities by maintaining logging, retention, and inspection settings as required. Provide proxy logs, traffic analysis, and technical input for security investigations and audits. Implement and maintain identity aware proxy policies integrating with identity providers and authentication systems. Support onboarding of new applications and SaaS services, validating compatibility with proxy inspection. Troubleshoot application access issues related to proxy routing, certificates, or inspection policies. Maintain operational documentation, configuration standards, and troubleshooting runbooks. Collaborate with network, endpoint, IAM, cloud, and security teams to deliver stable proxy services. Escalate design gaps, operational risks, or recurring issues to senior engineers or architects. Your Profile Essential skills/knowledge/experience: 6 years of hands on experience supporting enterprise proxy or secure web gateway platforms. Strong understanding of HTTP/HTTPS, TLS, certificates, encryption, and decryption processes. Experience implementing and managing proxy policies for traffic inspection, filtering, and outbound control. Solid foundation in networking fundamentals (TCP/IP, DNS, routing, load balancing). Proven ability to troubleshoot complex proxy related user access and performance issues. Experience working in production environments with change management and uptime requirements. Ability to work independently on operational tasks within established architectural guidance. Desirable skills/knowledge/experience: Experience with cloud delivered proxy or hybrid proxy environments. Familiarity with identity centric access models, SSO, and device or user based policy enforcement. Exposure to automation or scripting for proxy configuration or monitoring. Working knowledge of compliance or regulatory requirements affecting outbound traffic and data handling. Experience supporting globally distributed user populations. Vendor specific proxy or network/security certifications. TPBN1_UKTJ

Your new role We are seeking an experienced Mechanical & Electrical Engineer to join our Property & Asset team, playing a key role in the contract management, inspection, and technical assurance of a wide range of M&E building services across our housing portfolio.This is a highly technical, operationally focused role, acting as the subject-matter expert (SME) for M&E services, supporting internal teams and ensuring service contracts are delivered safely, compliantly, and to a high standard. Key Responsibilities Manage and oversee a range of M&E service contracts, ensuring performance, compliance, and value for money Undertake pre‑ and post‑inspection works, validating contractor quality and technical compliance Act as the M&E technical lead, providing expert guidance across asset management, compliance, repairs, and operations teams Support contract support officers and operational teams by responding to M&E technical queries, defects, and escalations. Manage and resolve all M&E-related issues, including mechanical, electrical, gas, and associated building services Ensure statutory compliance, health & safety standards, and best practice are consistently met Build effective working relationships with contractors, consultants, and internal stakeholders Out of Hours Requirement Participation in an out-of-hours rota twice per week Paid at £150 per shift, equating to approximately £14,400 additional annual income What you'll need to succeed You will be a technically credible and confident M&E professional with: Proven experience in Public Sector Housing M&E service contract management, inspections, and technical assurance Strong working knowledge of M&E services within housing, estates, or complex built environments The ability to act as a trusted adviser and SME across multidisciplinary teams Excellent communication and stakeholder management skills A proactive, solutions-focused approach with strong attention to detail Qualifications HNC or HND in Building Services Engineering or BEng (or equivalent) in a relevant engineering discipline18th Edition Wiring Regulations 2391 Inspection & Testing (or equivalent) Strong technical competence across all areas of M&E engineering, including: Mechanical systems Electrical systems Gas systems Associated compliance and safety requirements Essential Requirements Full UK driving licence Access to your own vehicle, which will be used for work-related travel Mileage will be claimed in accordance with organisational policy. What you'll get in return Salary: £46,634 - £51,815 per annumOut-of-hours earnings: circa £14,400 per year 27 days annual leave, plus bank holidays Excellent pension scheme and benefits package Hybrid working with a strong site-based presence The opportunity to work for a respected G15 housing association, delivering safe, high-quality homes for residents What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)

NDT Technical Engineer (Non Destructive Testing) - Rolling Stock Technical Services Rate: £330 - £380 per day (PAYE) Duration: 6 months (with extension possible) Location: Acton and other London based locations We currently have a requirement for an NDT (Non-Destructive Testing) Technician Engineer in our Vehicles Engineering Testing team. Based in our facility at Acton Town but expected to work across Zones 1-4, the post holder is responsible for performing a variety of Non-Destructive Testing (NDT) inspections, to support the organisations assets. This is a full time 'on site' role and there may be a requirement for working unsocial hours. The NDT Technician Engineer will have the ability to translate NDT codes, standards, specifications and procedures into NDT instructions, adapted to the actual working conditions and will currently hold 2 PCN certificates (level 2) covering the following disciplines: magnetic particle inspection, dye penetrant inspection, as a minimum. Skills, Knowledge and Experience (Essential unless stated Desirable) 2 PCN certificates, covering the following disciplines: magnetic particle inspection, dye penetrant inspection at level 2 2 PCN certificates in Ultrasonic Axle Testing (UAT), eddy current testing and ultrasonic testing - Desirable Experience performing NDT according to NDT procedures and standards Ability Interpret and evaluate results according to applicable standards, codes, specifications or procedures. Good knowledge of relevant British and International Standards Experience of working in a railway environment TPBN1_UKTJ

ENGINEER SURVEYOR Job Title: Engineer Surveyor (Lifting & Crane Equipment) Location: Covering the London Area (Must Live within the M25) Salary: Basic from £42,500 (includes London Weighting) plus Car Allowance and a Excellent Benefits Package Shift: Days, Monday – Friday, Flexible Working Hours Job Role of the Engineer Surveyor. A standout opportunity has become available for a Engineer Surveyor to join a leading inspection consultancy. Our client is looking for Engineers with a background of working on or with equipment such as forklifts, mobile elevated working platforms, passenger lifts and cranes and looking for something different in their career. You will be responsible for inspection to help identify defects and help prevent potential, avoidable defects and complete detailed reports.You will be required to make sure all customers are compliant with LOLER / PUWAR regulations and provide excellent levels of customer service. Sector – Inspection (Field Service) Non-Negotiable Requirements of the Engineer Surveyor Minimum Level 3 Engineering based qualification. Hands on experience with or on different pieces of lifting equipment including forklifts, platforms, passenger lifts, cranes, plant equipment (diggers, dumpers), military vehicles or aircraft. Requirements for the Engineer Surveyor Strong mechanical fault-finding skills. Mechanical engineering qualification, NVQ Level 3 or Equivalent. Experience working on or with various pieces of lifting equipment within manufacturing, military, marine, distribution or field service environments. Must live within the M25. Desirable Requirements for the Engineer Surveyor Excellent knowledge of LOLER/PUWAR Regulations. The Engineer Surveyor will benefit from: Employment with a stable and well-established organisation. Competitive benefits package (Worth £59,376 with Basic Salary). Excellent, ongoing training and development opportunities. 95% of the management team within the organisation have developed from a Surveyor position. Paid from door to door and working Monday – Friday on flexible working hours. If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. For further details contact Andrew McFarlane at Pioneer Selection As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply please see our website for further details

Electrical Installer (LV / Control Panels) £45,000 - £50,000 + Training + Progression to Approved + Overtime + Bonus + Enhanced Holidays + Company Benefits * Herefordshire (Site-Based / Nationwide Travel) Are you a qualified Electrician looking to take the next step in your career, with full support to become an Approved Electrician and gain your Inspection & Testing certification? You will be working on the installation of LV and ELV electrical systems across a range of industrial sites, including water and wastewater projects. This is a hands-on role involving cable installation, containment, and working from technical drawings, with regular travel and overnight stays required. The company is a highly respected electrical engineering specialist with a strong reputation in the industry and a growing pipeline of projects. They are committed to developing their engineers, offering full training towards Approved Electrician status and long-term career progression. This role would suit a qualified Electrician who is eager to develop their skills, gain further qualifications, and progress into a more senior, recognised position within the industry. The Role: Install LV and ELV electrical systems on industrial sites * Work from electrical drawings, schematics, and wiring diagrams * Carry out cable containment and armoured cable installations * Travel nationwide with regular overnight stays * Receive training towards Inspection & Testing (2391) * Maintain high standards of health & safety on site The Person: Qualified Electrician (Level 3 or equivalent) * Experience in industrial or site-based environments * Full UK driving licence If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. Reference Number: BBBH24544b Keywords: Electrician, Industrial Electrician, Trainee Approved Electrician, Electrical Installation, LV, ELV, Water Industry, Wastewater, Utilities, Electrical Engineer, Site Electrician, Cable Installation, Containment, Inspection and Testing Training We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

Are you ready to use your technical expertise to support a vital healthcare environment? Our client, one of the world's largest construction and development companies, is seeking an Electrical Test & Inspection Engineer to join their Building Services team. In this role, you will ensure the hospital remains a safe, clean, and well-ventilated space that directly aids patient recovery. By maintaining statutory compliance and operational safety, you will make a lasting, positive impact on the local community. The Role As the Electrical Test and Inspection Engineer, you will be responsible for periodic electrical inspection and testing across the estate. Your key duties will include: Inspection & Testing: Delivering periodic testing in line with current regulations Certification: Producing high-quality, accurate test reports and technical documentation. Compliance: Supporting audits and ensuring all documentation is maintained for statutory requirements. Technical Support: Assisting with wider electrical maintenance, including emergency lighting repairs, reactive fault finding, and minor works on systems such as access control and CCTV. Lifecycle Projects: Supporting ongoing lifecycle replacement programmes and electrical upgrades where required. Safety: Adhering to all relevant health and safety legislation and internal safety procedures. You To be successful in this role, you’ll bring a strong technical background and a commitment to precision: Qualifications: Fully qualified electrician (NVQ Level 3 or equivalent) with City & Guilds 2391 (or 2394/2395) Inspection & Testing. Technical Expertise: Strong experience in periodic inspection, testing, certification, and electrical fault diagnosis. Judgement: Sound judgement regarding compliance with regulations and the ability to work independently. Precision: The ability to work safely and accurately in a fast-paced hospital environment. Mindset: A proactive approach to maintenance and a dedication to high-quality workmanship. Package & Benefits Our client thrives through embracing differences and offers a supportive environment where diversity is valued. They provide a range of benefits designed to support your health, family, and career growth. Salary: £45,000 per annum Contract: Permanent, Full-time Health: 24/7 digital GP service for you and your family. Wellbeing: Financial wellbeing support and employee assistance programmes. Growth: Clear paths for professional development and training. Family: Enhanced family benefits including maternity, paternity, and bereavement leave. Flexibility: Flexible working options are available and can be discussed during the application stage. Apply Now! To apply for the position of Electrical Test & Inspection Engineer, click ‘Apply Now’ and send your CV to Connor Gwilliam. Interviews are taking place at this moment, so don’t miss your chance to join a dynamic team

Job Title: Electrical Engineer (Testing & Inspection) Location: Whitechapel, London Salary: £45,000 per annum Hours: Monday to Friday, 8:00am – 5:00pm (Full-Time) About the Role We are seeking a fully qualified Electrical Engineer with a strong background in testing and inspection to join our growing team based in Whitechapel. This is a fantastic opportunity for a skilled professional who takes pride in delivering high standards of safety, compliance, and workmanship across a range of electrical systems. Key Responsibilities • Carry out electrical testing and inspection in accordance with current regulations (BS 7671), • Complete Electrical Installation Condition Reports (EICRs), • Perform fault finding, diagnostics, and remedial works, • Ensure all work complies with health & safety standards and company procedures, • Maintain accurate documentation and certification for all completed works, • Inspect and test electrical installations in domestic, commercial, and/or industrial settings, • Identify non-compliance issues and recommend corrective actions, • Liaise with clients, site managers, and internal teams professionally, • Support installation and maintenance teams when required Requirements • Fully qualified electrician (NVQ Level 3 or equivalent), • 18th Edition Wiring Regulations (BS 7671), • City & Guilds 2391 (or equivalent) in Testing & Inspection, • Proven experience in electrical testing and inspection, • Strong fault-finding and problem-solving skills, • Full UK driving licence (preferred), • Ability to work independently and as part of a team, • Good communication and organisational skills What We Offer • Competitive salary of £45,000 per year, • Stable, full-time Monday–Friday schedule (no weekends), • Opportunities for ongoing training and professional development, • Supportive and professional working environment, • Company tools and equipment provided

Our client, a reputable leader in the equipment maintenance sector, is seeking a dedicated Mobile Powered Access Engineer to join their dynamic team near Peckham and South East London. This is an outstanding opportunity for an experienced professional to advance their career within a well-established organisation that values quality, safety, and employee development. Benefits: Competitive basic salary of up to £46,000 per annum, with performance-based bonuses On-call allowance of £200 per week, supplemented by overtime and call-out payments Company van fitted with a tracker, solely for business use Generous holiday entitlement of 20 days plus bank holidays Fully funded staff events held twice yearly, including summer BBQ and Christmas party Clear opportunities for career progression and ongoing skill development within a reputable organisation Supportive working environment focused on safety and professional growthDuties of the Mobile Powered Access Engineer: Conduct statutory examinations and inspections of mobile elevating work platforms (MEWPs) and similar powered access equipment Operate static boom MEWPs, including vehicle-mounted, trailer-mounted, and spider lifts with outriggers Maintain, repair, and service mobile access machinery to industry standards Plan and manage repairs and maintenance activities, either onsite or in the workshop Ensure compliance with health and safety regulations at all times as a Mobile Powered Access Engineer Support the on-call rota, providing standby and emergency assistance when required Keep detailed documentation of inspections, repairs, and maintenance activitiesRequirements: Proven experience as a Mobile Powered Access Engineer or similar position within the motor trade industry CAP qualification with IPAF 1B certification Strong knowledge of mobile platforms, inspection procedures, and safety standards Valid UK driving licence with the ability to operate the company van Excellent organisational skills and a proactive approach to customer service Ability to work independently and efficiently in field-based environments Commitment to maintaining safety and quality standards in all tasksIf you possess the skills and experience necessary for the Mobile Powered Access Engineer position, we encourage you to apply. This is a fantastic opportunity to join a forward-thinking organisation that is committed to employee development and safety excellence. Contact Liam Buffenbarger, Automotive Recruitment Specialist at Perfect Placement covering Peckham and Greater London, today to discover more about this fantastic Mobile Powered Access Engineer opportunity. Perfect Placement are specialists in Automotive Recruitment. So if you are looking for a New Job in the Motor Trade, be sure to contact our team today

Lead Shift Engineer Salary: Competitive + Benefits About Us We are a market-leading organisation experiencing sustained growth and ongoing investment across our operations. Known for innovation, operational excellence, and exceptional client service, we are seeking an experienced Lead Shift Engineer to join our high-performing engineering team. This is an excellent opportunity for a technically strong and motivated engineer who thrives in demanding environments, enjoys problem-solving, and takes pride in delivering high-quality mechanical and electrical services across complex sites. The Role As Lead Shift Engineer, you will oversee both planned and reactive maintenance activities, ensuring plant and equipment operate safely, efficiently, and reliably. This is a hands-on leadership role requiring: Strong technical expertise Clear communication The ability to foster a collaborative, high-performing team culture Key Responsibilities Deliver Planned Preventative Maintenance (PPM) across all mechanical and electrical plant per site schedules and asset registers Respond promptly to reactive maintenance, identify root causes, and implement corrective actions Diagnose and rectify plant faults to maintain operational performance Complete statutory maintenance in line with SFG20 requirements Manage critical spares stock, preparing parts lists and timelines for remedial works Issue and control Permits to Work for internal teams and subcontractors Ensure accurate and timely documentation of all maintenance and breakdown activities Maintain strong relationships with colleagues, subcontractors, and client representatives Present a professional, customer-focused approach at all times Keep plant rooms safe, clean, and compliant Ensure compliance with Health & Safety regulations, SLAs, KPIs, and SHEQ standards Qualifications & Experience Essential: Electrical or Mechanical Apprenticeship Proven Facilities Management experience with a strong operational track record Desirable: HNC / HND / Foundation Degree BOAS / BG01 City & Guilds 2360 Parts 1 & 2 (or equivalent) IET 17th Edition City & Guilds 2391 / 2394 / 2395 (Testing & Inspection) or relevant HVAC qualification Technical & Professional Skills Strong knowledge of building services and statutory compliance Proficiency in Microsoft Office and CAFM systems Calm, methodical approach under pressure Experience leading, mentoring, or supporting engineering teams Core Competencies Functional & Technical Excellence Customer Focus Communication Analytical Thinking Results Driven Commercial Awareness Team Collaboration & Leadership Why Join Us? This is your chance to step into a pivotal leadership role within a growing, forward-thinking organisation. You will be entrusted with responsibility, supported in your professional development, and empowered to make a tangible impact on operational performance and client satisfaction. Apply now to join a business driven by growth, innovation, and engineering excellence.

Structural Engineer Job in London Structural Engineer role in London for a reputable multidisciplinary consultancy. Our client is looking for someone to deliver high-quality structural engineering solutions across a range of projects including conducting assessments, preparing designs and reports. Our client has strong client relationships spanning the residential, education, commercial and healthcare sectors, focusing on excellent service delivery across a wide remit of disciplines including Building Surveying, Architecture, Quantity Surveying, Fire Engineering, Structural Engineering, Project Management and Site Inspection. Predominantly their client base sits within the M25 but they also have clients on the outskirts of London. They have seen considerable growth, creating opportunities for both new and existing team members to advance their careers and develop personally within a forward-thinking and evolving business that's focused on long-term success. Role & Responsibilities You will focus on remediation, refurbishment, strengthening, and upgrades of existing buildings, rather than new-builds Work closely with architects, surveyors, and clients to deliver safe, efficient, and sustainable solutions Carry out feasibility studies, structural assessments, and defect analysis on medium- and high-rise buildings Lead investigations, identify structural issues, and propose cost-effective repair or strengthening solutions carry out site inspections and monitor progress to ensure compliance with design and safety standards Prepare clear technical reports and provide expert advice to clients.Required Skills & Experience 5 years of post-qualification experience, with a focus on existing buildings, remediation, and refurbishment Degree in Civil or Structural Engineering, Chartered (IStructE/ICE) or working towards Chartership Experience in structural re-modelling, strengthening, and refurbishment of medium- and high-rise buildings Proficiency in structural design software, Microsoft Office, Tekla and TEDDS Experience diagnosing building defects, identifying causes, and designing appropriate remedial solutions Strong knowledge of UK building regulations, British Standards, Eurocodes, CDM Regulations and BSA.What you get back Salary of up to £65,000 26 days Holiday + Bank Holidays Flexible work options Private healthcare.Apply If you meet the criteria above, send us your CV and portfolio. We receive a large number of applications so if you do not hear back within 7 days consider your application unsuccessful this time. We will keep a copy of your details on file for future vacancies. In accordance with GDPR, by applying for this position you give us your consent to process your data in-line with our Privacy and Data Protection Policies which can be read on the privacy policy page on our website. Referral Did you know we run a referral scheme? We pay a £1000 referral bonus if you introduce us to anyone who we then successfully place in a new job role. Just send us their information and we'll do the rest. Terms: A candidate is deemed to have been successfully placed once they have started a new job as a result of an introduction made by Hunter Dunning and when they've successfully completed the probation period. Structural Engineer Job in London - Your Property Recruitment Specialists (Recruiter: Oliver Charlton Job Ref: 15297) #LI-Hybrid

Falcon Green is excited to be working with one of Europe’s top contractors, offering an excellent opportunity for a QA/QC Engineer to join a flagship, mission-critical Data Centre project in Europe. This role is ideal for a detail-oriented QA/QC Engineer who thrives on ensuring quality and compliance across technically complex projects and wants to strengthen their experience on a high-profile international build. You’ll join a well-structured and supportive project team, working for a contractor known for exceptional delivery standards, long-term career prospects, and progression opportunities across Europe. You’ll be part of a fast-paced, professional environment where quality is paramount, and your expertise will play a key role in ensuring project success. The position offers a competitive employment package under local labour regulations, including salary, living allowance, accommodation, flights, and a performance-based bonus. What You’ll Be Doing: • Implementing and managing QA/QC procedures and documentation from project initiation through to final handover., • Conducting inspections and audits to ensure all mechanical works meet project specifications, standards, and regulatory requirements., • Coordinating with project teams, subcontractors, and consultants to ensure quality standards are consistently achieved., • Reviewing method statements, ITPs (Inspection & Test Plans), and technical submittals for compliance., • Monitoring installation works to ensure adherence to approved drawings, specifications, and quality benchmarks., • Managing non-conformance reports (NCRs), corrective actions, and close-out processes., • Supporting commissioning and handover processes, ensuring all QA documentation, O&M manuals, and quality records are complete and accurate., • Attending site quality meetings, audits, and handover reviews. What They’re Looking For: • A relevant mechanical, engineering, or construction-related qualification., • Proven experience in a QA/QC role on complex or mission-critical projects (Data Centre experience is highly desirable)., • Strong knowledge of QA/QC processes, documentation, and industry standards., • Experience with inspections, audits, and quality reporting systems., • Proficiency in Microsoft Word, Excel, and standard QA/QC systems., • Excellent attention to detail and strong organisational skills., • Strong communication skills and fluency in English., • Willingness to travel and work internationally. This is a fantastic opportunity to secure long-term work within the rapidly growing Data Centre sector while gaining valuable international experience on a high-profile project. If you’re ready to take the next step in your QA/QC career, please send your CV to the email address below

Fire Alarm Engineer- Uxbridge- £32,000- £38,000 * £32,000 – £38,000 per annum (DOE) + Overtime & Benefits * Full-Time, Permanent * Excellent Benefits * Company vehicle, fuel, and tools provided. * Continuous training and career development opportunities. * Friendly, supportive team environment. * Covering multiple sites across West London & the surrounding areas Fire Alarm Engineer Company Overview: We are currently on the lookout for a skilled and reliable Fire Alarm Engineer to carry out installation, maintenance, and servicing of fire alarm systems across commercial and industrial sites. This is a hands on technical role requiring compliance with British Standards and a strong focus on customer service. Fire Alarm Engineer Key Responsibilities: * Install, test, commission, and maintain fire alarm systems. * Conduct routine service and inspection visits. * Troubleshoot and repair faulty systems efficiently. * Provide clear reports and documentation for all work carried out. * Advise customers on system performance and required upgrades. * Work independently and as part of a team to meet deadlines. Fire Alarm Engineer Requirements: * Proven experience as a Fire Alarm Engineer or in a similar role. * Relevant qualifications * Strong knowledge of fire safety regulations. * Full UK driving licence or equivalent * Excellent communication skills and a customer focused attitude APPLY NOW! Get Staff acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. Please note that if you have not been contacted within 7 days, your application for this position has been unsuccessful

Electrical Testing & Remedial Works Engineer General Description Carrying out Fixed wiring testing (EICR) in a variety of properties including domestic and commercial, mainly social housing and council properties. Follow up remedial works to be completed at time of testing and rewire programmes for non-compliant properties to follow. High standard of certification required and all certificates to be electronic via EasyCert. Some roles will involve working with an Electrical Improver helping with remedial work, paperwork, tidying etc. Experience of working from mobile devices is essential to complete job notes, photos and certification in an accurate and timely manner. Company vehicle, test equipment and all materials provided. Practical assessment of the applicant may be required before placement. The post holder will assume responsibility for completing all jobs assigned to them by the company which will predominantly be testing and inspection of an electrical installation but could also include, but not limited to, electrical installation, reactive maintenance, and planned maintenance. The company will expect all jobs to be completed to a high standard with the job holder using all technical knowledge to do so. Responsibilities & Duties • Conduct EICR’s and carry out necessary remedial works to client specifications., • Have a good understanding of electrical systems and be able to identify/ report faults., • Ensure safe working procedures in accordance with the current health and safety regulations and all other relevant regulations., • Fill out all paperwork and/or use the Oneserve / Easy Cert Application accurately and in a timely manner., • Communicate with residents and clients when required., • Deliver exceptional customer service., • Adhere to Company Policies., • To undertake any training provided by the company., • To Support any business change for the benefit of the company., • Any ad-hoc duties as reasonably instructed by your line manager or directors Required Skills & Experience. • Good knowledge of the electrical industry., • Extensive knowledge of the testing and inspection procedure., • Experience in the completion of electrical certification., • Experience of fault finding diagnostics., • Being able to work within a team., • Accurate reporting of works undertaken/further works required., • Experience of working from mobile devices is essential to complete job sheets electronically in an accurate and timely manner., • Good practical skills., • Good communication with customers., • Positive attitude and time keeping. Qualifications • City and Guilds level 3 electrotechnical qualification in electrical installation or equivalent (Mandatory), • City and Guilds 2391-51 or equivalent (Mandatory), • City and Guilds 2382-18 – BS7671 18th Edition update*, • Asbestos Awareness*, • Full Driving License for 12 Months or more

Approved Electrician / Testing Electrician | Commercial PPM & EICR | London & Surrounding Areas | £45,000£48,000 + Overtime + Van + Package This is a fantastic opportunity for an experienced Approved Electrician or Testing Electrician to join a respected Electrical Contractor delivering commercial PPM, EICR, and maintenance works across London and the surrounding areas, with realistic earnings of £55,000£60,000. The business has built a strong reputation for delivering high-quality electrical services across the commercial sector, supported by a stable pipeline of long-term contracts and repeat clients. They are known for their structured approach, well-organised workload, and supportive environment, ensuring engineers are equipped to perform at a consistently high standard. The Role Approved Electrician (PPM & Testing) This is a mobile role with a strong emphasis on electrical testing (EICR), supported by planned and reactive maintenance, along with remedial and installation works where required. Key responsibilities include: Electrical Installation Condition Reports (EICR) across commercial properties Planned preventative maintenance (PPM) Reactive maintenance and fault finding Electrical installation and remedial works General electrical duties across a range of commercial environments Work is carried out across London and the surrounding counties, with jobs scheduled efficiently to ensure a structured working day and minimise unnecessary travel. This role offers excellent variety, with a clear focus on testing while maintaining exposure to maintenance and installation, creating a well-rounded and engaging position. Working Pattern & Overtime Standard working hours are Monday to Friday, 40 hours per week (daytime hours). There are strong opportunities to increase earnings through overtime and additional work: Evening work (when required) paid at x1.5 Saturday work paid at x1.5 Sunday work paid at x2 Callout rota with £100 standby payment On occasions where evening work is scheduled, hours may be adjusted across the week (for example, condensed into a 4-day working pattern). Realistic earnings of £55,000£60,000 based on overtime and callout participation. Requirements To be considered for this role, you must have: NVQ Level 3 in Electrical Installation 18th Edition Wiring Regulations 2391 Inspection & Testing (or equivalent) ECS Card Full UK Driving Licence You will be confident working independently in a mobile role, with a strong work ethic and a professional approach when representing the business on client sites. This opportunity would suit individuals looking for a stable, long-term position within a well-structured and reputable contractor. Remuneration Package Approved Electrician £45,000 £48,000 basic salary Overtime available (enhanced rates as above) Company van (including personal use, if applicable) Tools and electrical testing equipment provided Phone and laptop 24 days holiday + bank holidays Pension scheme Health benefits This role would suit candidates currently working as: Approved Electrician, Testing Electrician, Electrical Maintenance Engineer, Mobile Electrician, Electrical Engineer, Maintenance Electrician, EICR Electrician Next Steps Please apply online today, or contact Rob at David Leslie Ltd for an informal and confidential discussion. About David Leslie Ltd David Leslie Ltd is a family-run construction recruitment consultancy with over 20 years experience connecting professionals and employers across the UK. Specialising in the Building, Fit-Out, and M&E Building Services sectors, our approach is built on trust, integrity, and long-term partnerships, ensuring both clients and candidates receive a service that is personal, transparent, and expertly delivered. TPBN1_UKTJ

Lead Electrical Engineer – London Bridge A leading Facilities Management provider is appointing a Lead Electrical Engineer to take technical ownership of a major commercial building in the City of London. This role is central to the site’s operation and suits an experienced electrical engineer who is confident leading teams, managing risk, and maintaining high standards in a demanding commercial environment. The Role The Lead Electrical Engineer will hold overall responsibility for the electrical infrastructure across the building, ensuring systems are safe, compliant, and performing as required. The role combines hands-on engineering with leadership, planning, and oversight, acting as the senior technical point of contact on site. Working closely with the facilities management team and client representatives, the Lead Electrical Engineer will set standards, resolve complex issues, and ensure all electrical works are delivered efficiently and professionally. Key Responsibilities Take full technical responsibility for all electrical systems, including power distribution, lighting, emergency systems, and critical infrastructure. Lead, supervise, and support on-site engineers and specialist subcontractors. Plan and deliver planned preventative maintenance and oversee reactive works. Diagnose complex electrical faults and implement effective, long-term solutions. Ensure full compliance with statutory regulations, health & safety requirements, and company procedures. Review and sign off electrical works, permits, and compliance documentation. Act as the primary electrical contact for the client and senior management team. Drive continuous improvement in site performance, reliability, and safety.The Candidate The successful candidate will be a highly experienced electrical engineer with a strong background in facilities management or commercial building maintenance. They will be comfortable taking ownership of a site, leading others, and making sound technical decisions in a live environment. Essential Requirements NVQ Level 3 (or equivalent) in Electrical Installation or Maintenance. 18th Edition Wiring Regulations. Proven experience in a senior or lead electrical role within the FM or commercial sector. Strong knowledge of electrical compliance, fault finding, and safe systems of work. Experience supervising engineers and managing subcontractors. Clear communication skills and a professional, client-focused approach.Desirable Test & Inspection qualification (2391 or equivalent). Experience working on large or complex commercial buildings. Familiarity with CAFM systems and maintenance planning.What’s on Offer Competitive salary and comprehensive benefits package. Long-term, stable role on a flagship City of London site. High level of responsibility and visibility within the contract. Ongoing training and professional development opportunities.This is a key leadership role for a Lead Electrical Engineer seeking ownership, responsibility, and the opportunity to set standards on a major commercial site in the heart of London

Job title: Compliance Engineer Location: Brimsdown, Enfield, UK (Site based role) World-changing careers, enabled by Johnson Matthey. With more than 200 years history, join us and help to accelerate the transition to net-zero! As a Compliance Engineer, you'll contribute to JM's mission as a world leader in sustainable technology, transforming energy and reducing carbon emissions for a cleaner, brighter future. As the site Compliance Engineer, you will be responsible for ensuring site assets meet with legislative requirements, through managing statutory inspections and maintenance work, including timely closure of remedial actions. This role acts as the Competent Person for the LOLER, PSSR and Legionella programmes, as well as managing third party inspections of vessels, piping and bunds. The role is also responsible for carrying out audit programmes to monitor engineering compliance and highlight areas of improvement needs, as well as being the site point of contact for insurance inspections. This role is a mix of site and office-based work and will require the holder to attend all areas of the site as part of routine duties, including climbing stairs and ladders to access equipment. This role does not cover electrical compliance. The role: As a Compliance Engineer, you will help drive our goals by: Proactively promote a positive Health & Safety culture and ensure adherence to JM policies (including HR/EHS/Security). Ensure that arrangements are in place for achieving legislative requirements on all plant and equipment, including but not limited to the following: pressure systems, lifting inspections, legionella, asbestos, and LEV. To ensure arrangements are in place to allow all statutory inspections and maintenance to be delivered on time, working with stakeholders to ensure that plant and equipment is available to undertake periodic inspections and maintenance. To put in place arrangements, both in-house and with 3rd parties, to ensure that all remedial works identified from the period inspection and maintenance are completed in a timely manner and to the relevant standard by competent persons. Management of 3rd party inspection and maintenance contracts. On-site point of contact for all compliance works and permits to work. Responsible for audit programme of assets to identify areas of improvement and non-conformity. To provide reporting to the business on levels of compliance and areas of non-conformity with mitigation plans. Key skills that will help you succeed in this role: Experience of industrial experience in manufacturing or maintenance environment. Experience in control of contractor processes and contractor management disciplines. Knowledge of current and future legislation, statutory requirements and best practice. Demonstrated ability to manage multiple tasks and changing priorities and the ability to work both independently and as a team member to accomplish objectives. Nice to have skills: Experience of HSE frameworks and working with the Competent Authority. Knowledge of Microsoft Applications (Project, Excel, Powerpoint, Word) Knowledge of CMMS systems (like SAP, Maximo or Hexagon) Even if you only match some of the skills, we'd love to hear from you to discuss further! What we offer: We make sure salaries are fair, competitive and aligned to individual roles, experience and responsibilities. We are also supportive of hybrid and flexible working and where applicable, offer life, medical and other benefits that support our employees' financial and physical wellbeing, such as: Retirement savings Share plans Saving accounts House saving funds Life and disability insurance Commuter allowances and loans Medical plans / health assessments Fitness discounts Ready to make a meaningful impact on your career and the environment? Join us and help shape a sustainable future while advancing your career! At JM, inclusivity is central to our values. We create an environment where everyone can thrive, embracing diverse perspectives to tackle challenges and ensure all colleagues feel valued and connected. For any queries or accessibility requirements, please contact (url removed). We will work with you to make suitable adjustments at any stage of the recruitment process. All conversations are confidential, and your feedback is welcome to help us provide an accessible and positive recruitment experience. Closing date for applications: This job advertisement will be posted for a minimum of 2 weeks, early application is advised. #LI-AG1 #LI-Onsite #CVL #JMUK To submit your application, please click the "Apply" button online. All applications are carefully considered and your details will be stored on our secure Application Management System. This is used throughout Johnson Matthey for the selection of suitable candidates for our vacancies as they arise.Johnson Matthey respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice: Johnson Matthey Privacy Notice . By applying for this role and creating an account you are agreeing to the notice. Johnson Matthey Plc is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, marriage or civil partnership, pregnancy or maternity, religion or belief

Position: Swimming Pool Engineer Location: Mobile - across London and South East Salary: £32,000 - £42,000 (DOE) We currently have an opportunity to join a leading maintenance contractor within the leisure engineering sector. Our client specialises in service and maintenance contracts with high-end leisure sector clients including Premier League football clubs, well-known leisure centre chains, and state-of-the-art swimming pools in luxury residential facilities. Swimming Pool Engineer Job Overview Completing on-site servicing, maintenance, and repairs on swimming pools, spas, hot tubs and related leisure facility equipment Carrying out small-works replacement and refurbishment projects on leisure equipment Working alongside the wider engineering team to carry out larger project works on high end installation projects Travelling across London (including Central), and the home counties Swimming Pool Engineer Job Requirements Previous experience completing servicing, maintenance and repairs on swimming pools, hot tubs, and spa equipment Any electrical qualifications (NVQ, 18th Edition, 2391 Inspection and Testing) - desirable but not essential Full UK driving licence Based either within London or within a 1-hour commute of the M25 Swimming Pool Engineer Salary & Benefits Basic salary £32,000 - £42,000, negotiable depending on experience Company vehicle provided Door to door travel pay 30 days holiday, including bank holidays 45 hour working week 1 in 5 call out rota, with a retainer and overtime rates paidBennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for

Our client is one of the largest facilities management and maintenance contractors in the UK, offering market leading opportunities for talented professionals looking for long term career progression. Due to an increase in upcoming projects, there is now a need for an Electrical Engineer to join this highly successful and forward-thinking organisation. We are looking for an Electrical Engineer who wants to work in a diverse role where no two days are the same. The Electrical Engineer, will be responsible for: Statutory and operational PPMs and reactive repairs, including safe isolation, fault finding and remedial works. Lead emergency lighting testing, remedial works, minor installations and electrical safety tasks. • Support weekly fire alarm testing, sprinkler bell tests and assist with detection system fault resolution. Provide electrical input for office moves, small works and power adjustments. Participate in general building tasks (basic plumbing, fabric support, minor handyman tasks, etc) when required. Maintain accurate PDA/CAFM records and follow safety procedures, including Lock Out / Tag Out and Permit to Work. Manage and escort contractors on site, ensuring safe systems of work, inductions and permit processes are followed. • Participate in on call rota and attend out of hours calls as required, • Attend additional weekend works as required by business needs, • Undertake all necessary training in a timely manner to meet role requirements., • Travel between sites when required to attend emergency tasks, with travel covered under company expenses. To be successful for this Electrical Engineer role you must have: • NVQ Level 3 in Electrical Installation or equivalent, • 18th Edition Wiring Regulations, • Strong commercial electrical maintenance experience (3 years+), • Ability to work independently as the site's electrical lead, • Confident with PDA use, record keeping and reporting, • Physically capable with safe manualhandling competency, • Working at Height / PASMA certification (or willingness to train) Desirable • 2391 Testing & Inspection, • LVAP awareness / willingness to train, • Fire systems, VESDA and detection familiarity, • IPAF certification, • Basic mechanical or HVAC knowledge, • L8 Awareness If you feel you have the necessary skills set and experience to perform this Electrical Engineer role, and you are interested in an opportunity offering unparalleled career development, please apply now

Graduate Electrical Engineer 2026 About Ferrovial Construction UK&I Ferrovial Construction is the UK based engineering and construction arm of the Ferrovial Group. It is the largest private transport infrastructure operator in the world in terms of capital invested. We have a presence across 15 countries with over 60 years’ experience. It is a Spanish multinational company operating through 4 divisions; Airports, Highways, Construction and Building subsidiaries. Ferrovial are committed to developing sustainable and innovative solutions, with the aim to create value for society, and for clients, investors and employees. We design and construct some of the UK and Ireland’s most high-profile transport infrastructure projects. We have the strength and depth to deliver complex major projects in-house, drawing on international expertise and full asset lifecycle capability. We provide our clients with cost-effective, value-added solutions and design and build sustainable assets for people and places. We maximise potential through continuous professional development and create an equal, inclusive and diverse place to work to drive innovation. At Ferrovial, we have five core values: Excellence, Innovation, Collaboration, Integrity and Respect. We are proud of our work and values which we live by to achieve our goals. Whilst working on large complex projects, you will be encouraged to achieve your maximum, all the while having support and guidance. An ability to work well in a team is key to the delivery of our projects, so that effective communication skills are critical. Ferrovial prioritises the mobility of its employees as a means of fostering talent. The company has set up a Global Mobility Portal, which operates as an internal job board where employees can find all openings worldwide. The company is keen for graduates to move overseas and gain experiences of different cultures and business ways and methodologies. Please note this opportunity is an option after the Graduate Programme unless you have a civils background. The role Ferrovial Construction is looking for Graduate Electrical Engineers to assist with, and in some cases be responsible for, day to day activities on a variety of major UK infrastructure projects. The Ferrovial 2-year graduate development programme is designed to develop personal, professional and technical skills through a blended approach. You will work under the supervision of Section/Project Managers and in collaboration with the site team. Key Responsibilities Contribute to the achievement of Health and Safety in accordance with company policy and ensure quality on our projects is upheld. Key Accountabilities * To focus on electrical systems including developing polices, standards, inspection procedures, and evaluation tools for M&E matters. * To assist in the co-ordination of the team activities to ensure that the project is completed within the budget in line with the cost plan, and on time in line with the agreed construction process. * To work with the procurement team to ensure compliance with financial parameters. * To assist in ensuring the project complies with health, safety, environmental and quality requirements. * To assist the Project Manager on the management of the team, giving advice on appropriate resourcing levels, effective performance management, employee development and motivation. * Adopting and promoting Ferrovial Construction UK Vision and Values. Taking ownership of the work assigned to you. * Adhere to safe working practice regulations on site and ensure all staff comply with the requirement. Skills and Competence We are looking for graduates with: * Excellent communication skills and ability to interact at a variety of levels * Degree or Masters in Engineering (All disciplines considered) * Motivated to learn and add value to the team, the role and the Graduate programme * Analytical thinker who enjoys problem solving * A proven team player who can effectively work with others * Enjoys working under pressure to meet deadlines * Proactive approach to working and learning * Commercial awareness and an understanding of the industry * Familiar with all Microsoft packages Interpersonal Skills * Highly motivated * Logical thinker with a willingness to learn * Resilient and a flexible approach to working * Results driven with strong communication skills * Work independently with minimal supervision Desirable * Knowledge of Health and Safety Legislation * Engineering experience & CSCS Card Essential Must have right to work in the UK by the start of employment and for the duration of the Graduate Programme. What we offer On the Ferrovial Construction Graduate programme you will get: * 2-year development programme in line with the UK engineering framework. Exposure to a diverse range of engineering disciplines * Work with Contractors and Sub-contractors to develop effective partnerships * Attend a variety of blended training to develop your technical, professional and behavioural skills * You will start the process of becoming chartered with internal and external support * You will either be given a project to work on or be given a small “Package” to manage from start to finish * Gain an understanding of Ferrovial Construction from a global perspective, with mobility opportunities * Given the opportunity to participate in charity volunteering and innovation projects. And much more! Other details The position is scheduled to start in September 2026 at the latest, if you wish to start earlier, we can accommodate this. Please note that this job description does not represent a comprehensive list of activities and employees may be requested to undertake other reasonable duties. Ferrovial Construction UK is an Equal Opportunities employer and as such treats applications equally and recruits purely based on skills and experience. We are committed to building an inclusive team from a variety of different backgrounds, perspectives and skills so we encourage candidates from underrepresented groups to apply

Our environmental services contractor is seeking a Section engineer to join their Stratford based team on a permanent basis with site visits on London based projects. The Section Engineer will join a growing delivery team, supporting sewage and drainage infrastructure works across the UK. This role is to replace a key vacancy and will play a critical part in delivering projects from pre-construction through to final handover. Works include new sewer installations, construction of manholes (MH), drainage diversions, and associated civil engineering works, delivered on behalf of water companies and major principal contractors, including experience aligned with high-profile infrastructure projects such as HS2. Role Responsibilities The successful candidate will take ownership of a section of works and be responsible for: Pre-Construction Preparation and review of documentation including: RAMS (Risk Assessments & Method Statements) Permits to Work ITPs (Inspection & Test Plans) Temporary Works documentation Supporting programme development and buildability reviews Liaising with client representatives, water companies, and principal contractors Construction Phase Setting out for drainage and sewer works Managing Site Engineers and site teams Supervising groundwork, temporary works, and permanent works Construction of new manholes and sewer lines Ensuring compliance with specifications, quality standards, and H&S requirements Coordination with Temporary Works Coordinators and design teams Handover Preparation of as-built drawings Compiling QA documentation and handover packs Supporting client sign-off and completion procedures Skills/experience/qualifications Proven experience as a Section Engineer (or Site Engineer ready to step up) within sewage, drainage, or utilities infrastructure Strong background in groundwork, temporary works, and permanent works Experience constructing new manholes and sewer systems Competent in setting out Experience managing site engineers and site teams Strong documentation and QA experience (RAMS, ITPs, permits, as-builts) Confident working with water companies and principal contractors CSCS card Strong leadership and communication skills Proactive and solution-focused mindset Ability to manage works from design stage through to completion Strong understanding of UK health & safety regulations Organised, detail-oriented, and quality-driven Desirable: Experience working on major infrastructure projects (e.g. High Speed 2) Confined Space qualification Temporary Works Supervisor (TWS) or related qualification Appointed Person (AP) qualification (beneficial but not essential) Benefits Competitive salary circa £ 42k per annum Office based in Stratford with sites across London Company vehicle or allowance Pension scheme Career progression within a growing civil engineering contractor Opportunity to work on high-profile UK infrastructure projects

Service Engineer £35,000 - £38,000 + Training + Overtime + Van/Fuel Card + Benefits Watford (Can be located: Barnet, North London, Harlow, Luton, Milton Keynes, Chelmsford, Essex, St Albans and all surrounding areas) Do you have Field Engineering experience looking to join a national company within the Sports equipment industry offering full multi-skilled training? This is a great opportunity to join a business at the forefront of its sector, who supply directly into High-end commercial sites and work within a close-knit and friendly team. This company supply a range of Gym / Sports based equipment. The role is due to huge growth and high demand across the UK. You will be required to travel to various customer sites within a local patch on a Monday - Friday basis. You will have a varied role of Installation, Maintenance and Inspection of equipment. This will involve Hand Tools, basic Electrics and occasional need to work at heights. This role is ideal for a Service Engineer looking to expand their skills with on-going training and boost earnings with guaranteed overtime. The Role: * Field-based role - travelling to Commercial sites. * Working on Sporting equipment. * Monday - Friday (40 hours contracted). The Person: * Mechanical and/or Electrical fault-finding experience. * Happy to travel in desired patch. * Commutable to London. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

2391 Electrician (Test & Inspect Engineer) Location: HMP Belmarsh Salary: £46,775.42 + an additional 5% in recognition of shift and weekend working Contract: Full Time Perm (39hrs) We are seeking a dedicated Test and Inspect Engineer to join our team at HMP Belmarsh, a category A high security adult male prison. Join a team that is more than just a group of colleagues - we work Monday to Sunday as a supportive and driven family, working together to create a safe and nurturing environment. HMP Belmarsh runs like a self-contained city, it takes hundreds of people to keep it functioning, and as the Facilities Maintenance Team we are committed and driving the smooth and safe operation, like a heart that pumps blood through the body, everything we do impacts every prisoner, employee, and visitor, and wider to the families and community. As a Test and Inspect Engineer you will have the opportunity to work alongside experienced and passionate colleagues who vary from Plumbers, Electricians, Carpenters, Painters, to Cleaners, and Administrators, and others, who are all dedicated to making a positive difference, providing a safe and secure environment for all. If you are looking for a role where you can use your skills to create a better future for others, we encourage you to apply for this compelling opportunity and join us in our mission to promote rehabilitation and positive change and be part of a team that truly makes a difference. We are a Ministry of Justice business and provide critical and time-bound services to HMPPS, and are looking for a Test and Inspect Engineer with a combination of the following qualifications and skills/experience: At least five years experience working as an electrician Two years experience working in a role as a test and inspection electrician or equivalent Experience working on commercial or industrial electrical systems and catering equipment Good working Knowledge of relevant health and safety requirements Strong communication skills Basic IT skills including knowledge of Microsoft Office Excel and Word Experience of working under pressure to tight deadlines C&G 2367 or 2357 (Electrical Installation) C&G 2391 - Electrical inspection and testing NVQ level 3 in Electrical Installations or equivalent 18th Edition Good Health & Safety knowledge. Excellent organisational, time management and people skills. If this sounds like you, we would like to hear from you! Explore a varied and rewarding career at GFSL. Welcome to careers at Gov Facilities Services Limited (GFSL). Joining us is your chance to help ensure prisons are secure and safe for prisoners and prison staff alike, and to play your part in helping prisoners reintegrate into society. Holidays are 25 days per year plus Bank Holidays, and a range of non-contractual benefits are provided. These range from Death in Service at 4x salary, to access to private GP consultations and an Employee Assistance Programme that offers counselling and information services for preventative care and to help employees in a crisis. There are also a range of financial reward mechanisms and access to retailer discounts. You will find a strong focus on safety, a supportive, inclusive workplace, a competitive benefits package, and real opportunity to build your skills and progress. Explore facilities careers where you can make difference. Pride In People. We're passionate about promoting greater diversity and creating a workplace and culture where all of our employees have a voice that is heard, feel a sense of belonging and are empowered to be their true selves. We recognise the value that every single employee brings to the organisation. Everyone's needs at work are different and we are committed to doing our best to satisfy these differences whilst ensuring consistency and fairness for all. We promise to champion diversity and inclusion with ongoing learning and training, as well as career progression opportunities for everyone. Future Plans. GFSL has been notified by it's shareholder (MOJ) that the provision of FM Services will in future be delivered by the private sector. This means that following a successful procurement process, GFSL's services will complete transfer to a private sector provider/providers no sooner than August 2027. Pride in People - Do the Right thing - One Team An ISO 9001 Certified Company TPBN1_UKTJ

We are looking for an Electromechanical Production Engineer to optimise and support manufacturing processes, ensuring efficient production, product quality, and continuous improvement within an electromechanical production environment. This role acts as the key link between Design and Manufacturing, particularly for New Product Introduction (NPI). Key Responsibilities Develop, implement, and optimise production processes, work instructions, and test procedures. Support NPI, running pilot builds, and transitioning products to full-scale manufacturing. Maintain and troubleshoot production equipment, tooling, and fixtures. Work with Quality Engineering to define inspection methods, investigate defects, and implement corrective actions. Lead continuous improvement initiatives using Lean, Six Sigma, and Kaizen methodologies. Provide day-to-day support and training to production staff. Requirements Two or more years of experience in production engineering, process engineering, or manufacturing support. Experience with electromechanical assemblies (motors, sensors, PCBs, actuators, wiring). Familiarity with Lean manufacturing, quality tools (FMEA, SPC, 8D), and ERP and MRP systems. Strong analytical, problem-solving, and communication skills. Experience in high-mix or low-volume manufacturing environments

Vehicle Inspection Engineer - Self-Employed / Associate / Zero Hour Location : Field-based across Cambridge/New Market/Thetford area. Contract : Self Employed / Associate / Zero Hour Day Rate: Competitive DOE Join a global leader in safety, inspection, and certification services! DEKRA Automotive is part of a worldwide business employing over 49,000 people in more than 60 countries. We provide expert, independent inspection services to ensure safety on the road, at work, and at home. In the UK, we are one of the fastest-growing independent vehicle inspection companies, working with an expanding portfolio of B2B clients. We are looking for experienced Vehicle Inspection Engineers to work with us on a self-employed basis, conducting high-quality vehicle inspections across Shrewsbury, Wrexham, and Ludlow! The Role As a Self-Employed Vehicle Inspection Engineer, you will carry out a variety of inspection types including pre-purchase inspections and warranty evaluations to the highest possible standard. You will work to pre-arranged appointments coordinated by our Stokenchurch-based deployment team, ensuring timely, professional, and accurate reporting. Your responsibilities will include: Completing thorough, accurate vehicle inspections in line with company standards. Producing detailed, unambiguous inspection reports using company templates. Maintaining professionalism and excellent customer service at all times. Supporting pilot programmes and new customer initiatives when required. Travelling within your designated area and occasionally beyond when necessary. About You We're looking for skilled technical professionals with: A minimum of 7 years' experience in formal vehicle maintenance, servicing, or MOT. City & Guilds Level 3 or HNC/HND equivalent qualification (IMI or IRTE membership desirable). Strong customer service, communication, and organisational skills. The ability to write clear, detailed, and accurate reports. A methodical, analytical approach to inspections and decision making. You must also have: A clean UK driving licence, your own transport with business use insurance Your own tools, and equipment in good working order. A limited company with Public Liability and Professional Indemnity and Employers Liability insurance Why Work with DEKRA Flexibility to work on an as-needed basis. The backing of a respected, global brand. Opportunities to work with a wide range of vehicles and clients. A role where your expertise directly supports safety and quality. Ready to join an industry leader and put your inspection skills to work Apply today to become part of DEKRA's growing network of specialist engineers. No agencies please. TPBN1_UKTJ

Mechanical Maintenance Engineer (service and repair) £52 - £55k per annum & overtime, vehicle/ fuel card & package My client is seeking a skilled and reliable Heating Engineer to join our dedicated team at Hammersmith, St Mary's & Charing Cross Hospitals. The ideal engineer will have experience in maintaining, repairing, and installing Low Temperature Hot Water, Medium Temperature Hot Water & Steam Systems. Qualifications & Experience: Proven experience as a heating engineer, preferably in a healthcare & commercial setting. Commercial plant room experience. Strong knowledge of various heating/ hot water systems and controls. Relevant certifications (NVQ Level 2/3, or equivalent). Excellent problem-solving skills and attention to detail. Ability to work independently and as part of a team. Various Tasks to be carried out; Monthly PPM and reactive visits relating to plant; Heating & Hot water Calorifiers, Plate Heat Exchangers. Removing bundles from calorifiers to allow inspection/ de-scaling. Upgrading system components; gauges, safety valves etc. Replacement of key system components on various system; Pumps, motorised valves, modulators, slam shuts, plate packs. Re-pipe works when system fails. Re-pipe works during project works. Various system upgrades due to the age of the systems. Key Responsibilities: Conduct regular inspections and servicing of all heating systems to ensure optimal performance. Respond quickly to heating-related emergencies or system failures. Maintain accurate records of maintenance and repairs via job reporting & good communication with their supervisor/ manager. Work closely with other staff when upgrades are taking place within Hospital wards. Feed all site/ system recommendations back to their line manager. Open to be working at multiple sites in 1 day. Jobs can be very Ad-hoc on these premises due to the age of the building, emergencies can come in at any time. Ability to work with Steel, Galvanised steel, stainless steel, copper & ABS, utilising crimped systems. If you meet the criteria then please contact Russ Cleverley in CONFIDENCE

Job Title: Section Engineer Job location: Canterbury Works Vent Shaft (Apply online only) Canterbury Rd, London NW6 5FR Working hours: Monday-Friday 7:30am-5:30pm Role Working from Canterbury Works Ventilation Shaft. Plan and then deliver a section of works working under the Sub Agent and Agent. Manage and drive the engineering aspects of a section of the works, developing and reporting of section programmes and budgets and ensuring that the works are conducted in accordance with the project requirements including health and safety. Liaise between different site disciplines to ensure effective planning and use of project resources. Manage and drive the training and development of the Site Engineering team. Key Responsibilities - Managing and co-ordinating the activities of the site engineers to ensure all setting-out and quality control procedures are performed in a timely and efficient manner, so as not to impede the construction programme. - Develop 6-weekly programmes with site engineers and simple benchmark productivity measures for the workforce and assess actual programme and productivity achieved for review at weekly progress meetings to include resource requirements. - Complete inspection and test plans, risk assessments and method statements for the control of the works ensuring that all necessary documentation, as required by these statements and plans, is produced in a timely manner. - Communicate with works managers, foremen, gangers, workforce and sub-contractors to ensure full understanding of information provided. - Communicate to the QA and QS teams non-conformances, and any instructions received from the client / designer. Ensure that comprehensive records of resources employed on additional works are maintained. - Manage the design through raising RFI's and FCD's ensuring that the design has been reviewed an approved prior to construction and is fit for purpose. - Procurement of Plant, Materials and Equipment through Requisitions. - Keep a full and accurate daily site diary, including any changes/variations, subcontractors' attendance, and records of work related discussions with client/designer/Construction Manager/project team. - Manage the assurance and handover process for a section of works - Adherence to project policies and procedures. Required qualifications, skills, behaviors and attributes Essential: - Degree level qualification in a Civil Engineering allied subject or HNC in Civil Engineering and vocational training in Engineering - Understanding of Engineering Principles - Technical knowledge of construction techniques and best practices. - Computer competence (MS Word, Excel, Document control system). - Relevant CSCS Card, SMSTS - Training in Health & Safety and Environmental management - Presentation Skills Training (as they deliver inductions / briefings etc). Desired: - Computer competence (CAD, Primavera software, Synchro). - Temporary Works Supervisor or Coordinator Trained - Appointed Person for Lifting Operations Trained - MEWPS for Managers Trained - First Aid Trained - Fire Marshall Trained - Relevant Experience with a Teir 1 Contractor

Job Description Role Title: Electrical Engineer Location: London (close to London Bridge) Working hours: 7am - 4pm Role Purpose: Carry out planned and reactive maintenance. Main Duties & Responsibilities: To carry out planned and reactive maintenance in accordance with the companys PPM and task schedules. Undertake PPM activity in a quality, professional manner. Production of technical and situational reports as required. Proactively use the technology systems given to you so that the Company can always be compliant with its contractual obligations Carry out the works requested in a professional and proactive manner at all times To communicate clearly and effectively with the rest of the team and clients at all times. Provide first line out of hours call out for the site. Writing activity reports in line with Company procedures accurately and timely. Proactively assisting the management team to produce quotations by giving accurate and good quality information where extra works are identified Attending team meetings/briefings as requested at all times To provide accurate time sheet information weekly and on time To ensure that the Company is presented in a good light at all times. Undertake reactive maintenance works as directed by the Help Desk and/or management team To escalate any major site issues or incidents to your line manager asap once noticed. To manage Integral sub-contractors whilst working on site Understand and be aware of the requirements of all relevant Health, Safety, Environmental and Quality legislation and are equally aware of their own roles and responsibilities within the Company. Ensure that all materials and equipment are handled, stored and used with due regard to the relevant Health, Safety and Environmental legislation. Actively participate in the health and safety processes required under the Company policies and procedures on portfolio including, but not limited to, accident investigation, reporting, risk assessments and auditing Any other reasonable instruction from the Contract Manager or his Line Managers. Co-operating with the company to allow it to fulfil its moral and legal duties and obligations. Update Client CAFM system Essential Qualifications & Experience: Minimum of 5 years relevant experience within Maintenance or similar Electrical/Mechanical Engineering apprenticeship or similar C&G Pts. 1 & 2, equivalent or exceeds. 18th Edition IEE: Wiring and Installation (Ability to attain 18thEdition through additional training if you have 17thEdition) C&G 2391 test and inspection; BS 7671:2001 for inspection, testing and certification. Excellent communication skills and the ability to deal with all levels of staff. Proactive in achieving the highest standard of operation. Have good IT and report writing skills. Ability to work under pressure whilst remaining calm, clear thinking and able to deliver the required services to the client within given time constraints. Employee Benefits: Overtime x1.5 on weekday and x2 on weekends + day in lieu on bank holidays Standby rate is £15 per day and £50 on bank holidays 24 days holiday plus bank holidays (pro rata into shifts for shift workers) Ability to buy and sell holidays buy 5 days & sell 2 days Life assurance Auto-enrolment company pension scheme Employee Assistance Program (EAP) Cycle to work scheme Season Ticket Loan Employee discounts with various brands Learning and development programs, training and career opportunities TPBN1_UKTJ

Electrical Testing and Fixed Wirer Tester London | £44,000 – £49,000 dependent of experience + Company car or Allowance + Private health + pension + Overtime + Benefits Are you a qualified Electrician, Industrial Electrician, or Electrical Engineer looking to step away from constant site installation work and move into a more autonomous, professional electrical testing and certification role? Do you hold 18th Edition, testing qualification either 2391 or 2394 & 2395? We are working with a extremely stable, global leading engineering organisation seeking an Electrical Testing and fixed wirer tester to carry out statutory inspections and electrical testing across a wide range of industrial and commercial environments (never domestic) in the London area. This role offers stability, strong earning potential, excellent benefits, and the opportunity to use your technical expertise in a client-facing capacity. The Role – Electrical Testing and Certification Engineer You will operate independently while being part of a national engineering team, carrying out high-quality inspection, examination, and electrical testing of installations. This is an ideal opportunity for: Industrial Electricians Maintenance Electricians Electrical Engineers Test & Inspection Electricians COMPEX Electricians Carry out inspection and electrical testing of installations in commercial and industrial environments Conduct EICRs Ensure all work complies with current electrical standards, 18th Edition regulations, and Health & Safety requirements Produce accurate technical inspection reports within agreed timescales Provide professional technical advice to clients Maintain high customer service standards Identify potential additional service opportunities Key Responsibilities: You will work across varied sectors including manufacturing, power & utilities, retail, logistics, transport, and public sector environments — giving you a technically diverse and interesting workload. Salary & Package £45,000 - £49,000 per annum (dependent on experience) Company Car OR Car Allowance Fuel Card Overtime available Attractive company pension 33 days holiday inclusive of STAT Flexible working Private healthcare Flexible benefits Full training and ability to study external qualifications 18th Edition (BS7671) Regulations – essential City & Guilds 2391 or 2394/2395 – Inspection & Testing qualification essential NVQ Level 3 / City & Guilds Electrical Installation (Part 1, 2 & 3 or 2365 Diploma) Experience in fixed wirer testing advantageous Time-served apprenticeship highly desirable Strong knowledge of electrical installations Full UK Driving Licence Good IT skills and ability to produce technical reports Essential Qualifications & Experience If you are a qualified Electrician or Electrical Engineer with 18th Edition and 2391 or 2394/2395 inspection/testing qualifications, looking to progress into an inspection-based role focused on electrical testing and certification, we would like to hear from you. Apply today

The Electrical Field Service Engineer will be responsible for the commissioning, maintenance and repair of AC Chargers, Rapid DC, Ultra and High-Power Charging (HPC) EV Chargers across sites in the UK. This role is suited to someone with a strong electrical background who can work independently and deliver high-quality technical support on-site. You will ensure that all EV charging stations operate at peak performance and meet the high standards of our company and clients. This role will require someone who is comfortable working in various environments, including outdoor sites and confined spaces. Occasional travel and overnight stays will be required. Job requirements Essential: NVQ Level 3 Electrical Qualification. Minimum 2 years’ experience in a field-based engineering role (commissioning, maintenance, or repair of electrical systems/equipment). Demonstrated ability to work independently on client sites and resolve technical issues without direct supervision. Experience working under SLA-driven environments. Familiarity with basic test and measurement equipment such as multimeters and voltage testers. Excellent problem-solving skills with the ability to diagnose and repair complex technical issues. Strong communication and interpersonal skills for effective customer interaction. Ability to manage time effectively while travelling between client sites. Valid UK driving licence with 6 penalty points or less. Desirable: BS7671:2018 (18th Edition Wiring Regulations). City & Guilds 2391/2394 Testing and Inspection. Previous experience in the EV charging, renewable energy, or power electronics sectors. EV charging station certification or manufacturer-specific training. Hands-on experience with commissioning, maintaining, and repairing Rapid DC, Ultra and HPC EV chargers. Proficient in reading and interpreting electrical schematics and technical manuals. Understanding of analogue & digital electronics and components. Awareness of electrical hazards and on-site H&S requirements. Job responsibilities Work collaboratively with the Service Coordination and Operations teams to ensure accurate job completion data and timely follow-up on service reports. Commission and configure AC and Rapid DC chargers at client sites. Conduct initial set up and testing to ensure correct operation and compliance with industry standards. Collaborate with the project management and installation teams to ensure seamless integration of charging stations with client infrastructure. Maintain company assets, tools, and test equipment in good working order and report any defects immediately. Perform routine and preventive maintenance on EV charging stations to ensure optimal performance and uptime. Diagnose and troubleshoot technical issues, including electrical, mechanical and software-related problems. Conduct diagnostic tests, firmware updates and calibration of EV chargers as necessary. Replace faulty components and occasionally entire AC chargers. Ensure that all repairs are completed in accordance with manufacture guidelines. Provide on-site technical support and training to clients on the use and operation of EV chargers. Respond to service requests promptly and maintain effective communication with clients to ensure customer satisfaction. Document all service activities, including repairs, maintenance and customer interactions in the service management system. Adhere to all safety regulations and company policies while working in the field. Ensure compliance with local electrical codes and standards during commissioning and maintenance activities. Participate in regular safety training and certifications as required. Job benefits Structured career progression framework Company van + fuel card Overtime 30 days annual leave (inclusive of company shutdown days) Travel subsistence provided Discretionary Company performance bonus BUPA Healthcare (after 6 months) Salary Sacrifice Pension Scheme (8% total) Salary Sacrifice EV Car Scheme & Charger Installation Salary Sacrifice Holiday Purchase Scheme (up to 5 days) Enhanced Family Friendly Policies Additional benefits platform for you to select a wide range of discounted benefits and services Long Service Awards

AR810 - Solar Engineer Location: Trowbridge Salary: £34,000 - £39,000 + Bonus Overview: First Military Recruitment are currently supporting our client in the search for a Solar Engineer. The purpose of this role is to maintain Solar plants in an optimum operating condition. Our client is keen to offer opportunities to Ex-Military personnel, but all applications will be considered. Duties and Responsibilities: Adhere to all HSE procedures at all times and play an active role in risk assessment. Perform preventative and corrective maintenance of electrical components, inverters (i.e., thermal analysis, performance analysis), modules (i.e., thermal analysis, integrity checks), CCTV/Security Systems, Monitoring systems, Structures (i.e., bolt tightening, corrosion checks). Provide comprehensive reports in line with company standards, in a prompt and diligent manner; these business-critical reports can be prepared remotely, not necessarily at site or in the office. Provide electrical maintenance services for portfolio of solar farms in a specified region. This will require regular travel to sites in your allocated region. On occasions you will be expected to travel to different regions to provide extra support if required. Assist with the compilation of insurance and warranty claims. Take full ownership of assigned sites. Manage relationships local subcontractors. Skills and Qualifications: A recognised electrical qualification such as City and Guilds 2382-18 (18th Edition), would be an advantage. Any Inverters maintenance course would be an advantage. Testing and inspection certification 2391 an advantage. Electrically trained; BS7671 and Level 3 Electrical NVQ or equivalent (e.g., apprenticeship completed, IET etc) Able to safely pass LV1 assessment. Previous experience working as Electricians Mate. Industrial PV installation maintenance experience. Inverter maintenance experience. High Voltage (HV) Switching experience. Knowledge of network infrastructure (e.g., LAN, routers, switches). Clean, full Driving Licence. Working at heights is an advantage. Be comfortable working in a team. Good time-management and punctuality. Able to work under pressure. Able to prioritise workload effectively. Able to work remotely without close supervision. HSE awareness. Being pro-active, able to work autonomously and use initiative. Problem solving attitude. Naturally inquisitive with strong technical understanding. A 'can-do' attitude and willingness to be adaptable. Passionate about renewables (highly desirable). Motivated and willing to receive training and development. Be comfortable in an out-door work environment. Location: Trowbridge Salary: £34,000 - £39,000 + Bonus TPBN1_UKTJ

Job Title: Materials Lab Support Technician Salary: £32,000 Location: Ampthill Contract: FTC (24x Months) Sector: Defence/Aerospace Working Pattern: (Mon - Thu > 37.5hrs) Role Overview We are seeking a Materials Lab Support Technician to assist in the day-to-day operation of the Materials Laboratory. Working closely with the Materials Engineer, you will support testing, analysis, and general laboratory activities, ensuring compliance with company, industry, and regulatory standards. Key Responsibilities: Operate and maintain analytical laboratory instruments Conduct routine chemical, mechanical, and thermal testing, recording accurate results Perform visual inspection of product samples, identifying defects and recording dimensional data Carry out basic calculations (e.g. concentrations, percentage deviation) and compile data reports Manage laboratory consumables, including stock control, distribution, and rotation Set up, dismantle, clean, and store laboratory apparatus and glassware Maintain a clean, organised, and safety-conscious laboratory environment Perform and record routine calibration checks on equipment (daily/weekly) Identify and report non-conformances, supporting investigations and corrective actions Liaise with internal stakeholders to prioritise testing requirements Support experimental design and data interpretation under senior guidance Essential Skills & Experience: Strong attention to detail and excellent organisational skills Basic knowledge of chemical testing processes Ability to follow Standard Operating Procedures (SOPs) accurately Basic problem-solving skills and ability to troubleshoot minor issues Good communication skills and ability to work effectively within a team Security Clearance Requirements: To Start: BPSS clearance required

Title: Fire Extinguisher Engineer Fire Extinguisher Engineer Benefits Basic salary: £32,500 plus London Weighting (£5,000) OTE: £42,000+ Joining bonus: £1,500 total (£750 at 6 months, £750 at 12 months) Vehicle: Company van and fuel card provided Holiday Entitlement: 22 days’ holiday + 8 bank holidays Pension scheme PDA / Uniform / Tools provided Role: Fire Extinguisher Engineer Responsibilities As a Fire Extinguisher Engineer, your duties will include: Servicing, maintaining and installing portable fire extinguishers in commercial and residential environments Planning and managing your own daily service routes Liaising with customers to arrange service appointments Ensuring accurate completion of reports via PDA Maintaining compliance with fire safety regulations and health & safety standards Working independently and professionally, representing the company brand in the field Fire Extinguisher Engineer Requirements: BAFE Certification – Essential Full UK Driving Licence – Essential Previous experience as a Fire Extinguisher Technician or Fire Extinguisher Engineer Experience in customer-facing roles Ability to work remotely and manage your own workload Why Apply? Secure a long-term role with a respected leader in fire protection Join a growing team with structured training and development Benefit from full support and modern tools (PDA, vehicle, uniform) Realistic OTE and performance incentives Apply Now! If you’re an experienced Fire Extinguisher Engineer looking for a fresh opportunity with great benefits, supportive management, and long-term prospects - apply today! Keywords to help your application: Fire Extinguisher Engineer | BAFE Engineer | Fire Safety Technician | Fire Protection Engineer | Fire Risk | Fire Door Inspection | Fire and Security Engineer | Mobile Fire Engineer | Field-Based Fire Extinguisher Engineer

Company Profile CBRE is the global leader in real estate services and leverages the industry's most powerful knowledge base to meet the commercial real estate needs of its clients worldwide. Our vision is to be the preeminent, vertically integrated, globally capable real estate service firm. Globally we employ over 70,000 employees and operate in 48 countries. Job Title: Foot Mobile Engineer CBRE Global Workplace Solutions is a leading global provider of integrated facilities and corporate real estate management. We are recruiting an Foot Mobile Engineer to join the team located in London. The successful candidate will be able to install and maintain new plant and equipment when required, ensuring that plant faults and defects are swiftly rectified. Role Summary: * React to breakdown maintenance requests within the required SLA's * Technical awareness of computer room/call centre/trader operations and experience of power, UPS, CPS, distribution, cooling etc * Repairs to modular UPS systems * Test and diagnose power quality issues including harmonic distortion using onsite power analysers * Able to apply a risk focused maintenance approach and operations of plant and systems in data centres/critical environments * Provide emergency response standby, call out * Escalate urgent issues identified through to the Technical Services Manager * Respond to work interruptions, outages or emergencies consistent with the SLA * Responsibility for ensuring all critical related engineering maintenance documentation & records are kept updated * Advise the Facilities Management Team of changes in critical environment requirements * Must be willing to work over & above contractual hours. * Undertake site surveys & produce Works Requests, Method Statements & Risk Assessments for planned works * Undertake Upgrade & Install work * Understand and interpret technical drawings / instructions / processes & O&M's * Ensure completion of all reactive Helpdesk Requests * Monitor and analyse environmental conditions, review the loading/working conditions of critical equipment regularly * Ensure that financial processes are adhered to at all times * Complete an incident report for all abnormal incidents affecting systems availability (draft prepared within 24 business hours of an incident) * Determine the root cause and action items required to restore availability and prevent a recurrence * Review and submit to the Technical Services Manager ensuring all actions are documented reviewed and completed * Entering relevant quotes and remedial works onto the in-house system Experience Required: Essential * 18th Edition Electrical Wiring Regulations Desirable Experience working with building management systems including fault finding and operator use Experience with VAV systems, FCU systems, passive and active chilled water circuits and chilled beams Experience and understanding of HVAC systems Understanding of a CDM process Excellent facilitation, communication skills at all levels Evidence of Excellent Customer Service Delivery Able to organise self to manage assigned tasks, determine material requirements. Experience of H & S procedures & requirements. COSHH, Working at Heights, Risk Assessment etc. Health & Safety Qualified i.e. IOSH and/or NEBOSH Testing and Inspection of Electrical systems Knowledge of emergency response/standby/call out activities and protocols Understand the monitoring of utilities and environmental programmes Be or have been an Authorised Person e.g. (AP15/12) Water hygiene L8

Job Title Electrical Bias Engineer Job Description CBRE Global Workplace Solutions is a leading global provider of integrated facilities and corporate real estate management. We are recruiting an Electrical Bias Engineer to join the team located in London Role Summary: React to breakdown maintenance requests within the required SLA's Repairs to modular UPS systems Test and diagnose power quality issues including harmonic distortion using onsite power analysers Provide emergency response standby, call out Escalate urgent issues identified through to the Technical Services Manager Respond to work interruptions, outages or emergencies consistent with the SLA Responsibility for ensuring all critical related engineering maintenance documentation & records are kept updated Advise the Facilities Management Team of changes in critical environment requirements Must be willing to work over & above contractual hours. Undertake site surveys & produce Works Requests, Method Statements & Risk Assessments for planned works Undertake Upgrade & Install work Understand and interpret technical drawings / instructions / processes & O&M's Ensure completion of all reactive Helpdesk Requests Monitor and analyse environmental conditions, review the loading/working conditions of critical equipment regularly Ensure that financial processes are adhered to at all times Complete an incident report for all abnormal incidents affecting systems availability (draft prepared within 24 business hours of an incident) Determine the root cause and action items required to restore availability and prevent a recurrence Review and submit to the Technical Services Manager ensuring all actions are documented reviewed and completed Entering relevant quotes and remedial works onto the in-house system Experience Required: Essential 18th Edition Electrical Wiring Regulations High Voltage Appointed Person Desirable Experience working with building management systems including fault finding and operator use Experience with VAV systems, FCU systems, passive and active chilled water circuits and chilled beams Experience and understanding of HVAC systems Understanding of a CDM process Excellent facilitation, communication skills at all levels Evidence of Excellent Customer Service Delivery Able to organise self to manage assigned tasks, determine material requirements. Experience of H & S procedures & requirements. COSHH, Working at Heights, Risk Assessment etc. Health & Safety Qualified i.e. IOSH and/or NEBOSH Testing and Inspection of Electrical systems Knowledge of emergency response/standby/call out activities and protocols Understand the monitoring of utilities and environmental programmes Be or have been an Authorised Person e.g. (AP15/12) Water hygiene L8 About CBRE Global Workplace Solutions: As one of the business units in CBRE, Global Workplace Solutions provides end-to-end services across the complete lifecycle of the workplace, helping to improve business operations and reduce cost. As a one-stop solutions provider with a broad array of long-term customers and customized services, Global Workplace Solutions has delivered US$3 billion in savings to customers over the past ten years. CBRE Group, Inc., a Fortune 500 and S&P 500 company headquartered in Los Angeles, is the world's largest commercial real estate services and investment firm (in terms of 2014 revenue). The Company has more than 70,000 employees and serves real estate owners, investors and occupiers through more than 400 offices worldwide

Job Title: Mobile Electrical Engineer Location: South London Contract Type: Full Time, Permanent Salary: £45,000 £47,000 per annum Role Overview We are currently recruiting for a skilled and reliable Mobile Electrical Engineer to join a leading maintenance service provider, covering a portfolio of commercial and retail sites across South London. This is a fantastic opportunity for an experienced engineer to work within a well-established team delivering high-quality maintenance services across a varied estate. The role will involve a mix of planned preventative maintenance (PPM) and reactive electrical works, with occasional support across other building services where required. Key Responsibilities Carry out planned preventative maintenance (PPM) on electrical systems Attend and rectify reactive electrical faults in a timely manner Perform fault finding, testing, and inspection across commercial environments Ensure compliance with all current electrical regulations and health & safety standards Complete all relevant documentation and reports accurately Liaise with clients and internal teams to ensure service delivery excellence Support with minor mechanical or fabric tasks when required Required Qualifications & Experience Essential: NVQ Level 3 / City & Guilds in Electrical Installation or equivalent 18th Edition (BS7671 Wiring Regulations) Proven experience in a mobile role within commercial environments Strong fault-finding and diagnostic skills Full UK Driving Licence Desirable: 2391 Test & Inspection (or equivalent) Experience within FM / building services environments Basic mechanical knowledge (AHUs, FCUs, pumps etc.) Benefits Door to Door travel paid! Company van and fuel card. 25 Days holiday plus bank holidays. Uniform and Tools provided from day 1. Training and career progression opportunities Mobile phone / tablet provided Auto enrolment on the company Pension scheme, Death in Service available after qualifying period. Attractive standby payment, Opportunity to earn overtime. Apply Now If you are an experienced Mobile Electrical Engineer looking for your next opportunity within a reputable maintenance service provider, apply today! TPBN1_UKTJ

Job Description Position: CAP Engineer Salary: up to £52,000 Shifts: Monday – Friday - Days Powered Access Engineer Benefits: A competitive salary Genuine opportunities for career progression Company Pension Scheme Employee welfare programme About your new company: My client, a national provider of Powered Access and Plant equipment are looking for an experienced CAP Powered Access Engineer to join their rapidly expanding team. About your new Powered Access Engineering role: Routine maintenance, service and repair of Powered Access Machinery Repairs as necessary to ensure hire equipment is fit for purpose and operating efficiently. PDI inspection work. LOLER’s What you’ll need to succeed for this Powered Access Engineer role: Previous experience in Powered Access, Plant, Material Handling or HGV. CAP Licence (desirable) A passion for service Approachable and the ability to work in a team. Full UK Drivers licence Previous experience as a Powered Access Engineer is beneficial Next steps: If you are interested in applying for this CAP Powered Access Engineer role or you are looking for advise on your next career move, please you up-to-date CV via this advert or call Karla on (phone number removed). INDKA

Murphy is recruiting for a Senior Site Engineer to work with Energy on the National Grid, Great Grid Partnership across various projects. Our business is well-known for its extensive in-house expertise, experience, and continuous drive to innovate within the industry to create added value for all our customers. Throughout our history we have strived to challenge the norm and incorporate a wide range of new technologies and capabilities to ensure we meet the ever-changing markets and demands. Today we support groundbreaking transmission and distribution projects in four countries - ensuring their energy security for decades to come. We offer a wide range of services including design, construction and commissioning. We deliver Engineering, Procurement & Construction (EPC) projects serving both regulated and private customers along with technical and engineering solutions within the conventional power and energy transition markets. Our continual drive to innovate, while encouraging sustainability, ensures we remain at the forefront of the industry, and is demonstrated in our long-standing relationships with major energy providers in multiple countries. A day in the life of a Murphy Senior Site Engineer: Establish and promote best practice in health, safety and environmental matters in conjunction with the SHQE department. Assist with temporary works design schemes Maintain good working relations with client / designer / Team, together with our supply chain. Advise engineers on setting out methods and techniques. Ensure that the drawings and specification documents contain sufficient, accurate information for construction of the works. Formally request any missing information in sufficient time to allow the programme to proceed without delay. Communicate with foremen and supervisors to ensure full understanding of information provided. Overseeing the selection and requisition of materials and plant for the use in the construction process. Prepare written risk assessments and method statements for the control of the works. Keep a full and accurate daily site diary, including any changes/variations, subcontractors’ attendance, and records of work related discussions with client / designer / project team. Ensure that inspection and test plans are completed as required by the PMP / Specification, including a check of dimension accuracy and quality Still interested, does this sound like you? Experience in Construction or Civil Engineering projects. Experience within ITPs, RAMs & Temporary Works. Excellent knowledge of current civil engineering legislation as well as Health & Safety and Environmental legislation. Ability and confidence to discuss engineering issues with people across various levels and disciplines. Ability to produce, implement and manage safe systems of work for construction procedures

Sprinkler Service Engineer £40,000 - £50,000 + Overtime (OTE £60,000-£65,000) + Van + Bonus (2 per year) + Flexible start /finish London (or surrounding areas) Looking for a Sprinkler Service Engineer role in a local patch with strong earning potential, lots of overtime and flexibility? Exciting opportunity for a Sprinkler Service Engineer to work for a market leading company doing a mix of servicing, inspections and maintenance work on a local patch. This Sprinkler Service Engineer role is field-based, covering a local patch. The Sprinkler Service Engineer will work on commercial and industrial fire sprinkler systems, carrying out servicing, testing, inspections and maintenance. The Role Service, maintenance and inspection of fire sprinkler systems Carry out testing and routine servicing in line with schedules Work on pumps, valves and associated fire protection systems Diagnose faults and carry out repairs on sprinkler systems Attend reactive callouts where required Work across commercial and industrial sites Operate independently with occasional small-team supportThe Person Background as a Sprinkler Service Engineer Direct experience working on fire sprinkler systems Experience with servicing, testing, maintenance and inspections Knowledge of pumps, valves and fire suppression systems Comfortable working in a field-based role Full UK driving licenceWhy This Role / Package .£40,000 - £50,000 OTE with realistic earnings up to £60,000-£65,000 Overtime available to increase earnings Saturday paid at time and a half Sunday paid at double time Flexible working with no strict start or finish times High level of autonomy in a field-based role Specialist sprinkler environment with focused work Mix of independent work and small-team collaboration Keywords Sprinkler Service Engineer, Fire Sprinkler Engineer, Sprinkler Maintenance Engineer, Fire Protection Engineer, Sprinkler Systems, Fire Suppression Systems, Sprinkler Testing, Sprinkler Maintenance, Pumps And Valves, Planned Maintenance, Reactive Maintenance, London, Watford, Enfield, Slough, Luton, Hemel Hempstead

Fire Alarm Engineer Role: We are seeking a skilled and detail-oriented Fire Alarm service Engineer to join our team in London. The ideal candidate will possess a strong background in fire alarm systems and engineering principles, with expertise in system servicing, and inspection. The use of Honeywell Gent and Siemens fire alarm systems. This role requires hands-on experience with fire alarm systems and fittings. The Fire Alarm Service Engineer will work closely with construction teams to ensure compliance with safety regulations and standards. Responsibilities: Implement fire protection systems, including fire alarms systems. Conduct inspections of construction sites to ensure compliance with fire safety codes and regulations. Provide field service support for the installation, maintenance, and repair of fire alarm systems. Collaborate with contractors and clients to assess needs and provide technical guidance on fire safety measures. Perform testing and troubleshooting of sensors, alarms, and other fire protection devices. Use hand tools and power tools effectively during installation and maintenance tasks. Qualifications Proven experience in fire protection engineering or a related field. Strong mechanical knowledge with the ability to work with various hand tools and power tools. Familiarity with construction processes and standards related to fire safety. Experience in alarm system installation or service technician roles is preferred. Must have experience in GENT and Siemens alarms systems Excellent communication skills for interacting with clients, contractors, and team members. Ability to work independently as well as part of a collaborative team environment. Work Location: In person

Electrical Design Engineer (control panels) up to c45k + Benefits South East - Perm Ref: ABJ6480 An experienced Electrical Design Engineer with control panel design expertise is required to join a well-established and growing engineering organisation delivering innovative automation and engineering solutions across a range of industries. This is an excellent opportunity to work within a collaborative, technically strong team environment, where you will play a key role in delivering high-quality engineered solutions from concept through to installation and client support. You will work closely with Mechanical Design, Software, Project and Installation teams, contributing electrical designs, control panel layouts, schematic drawings, and technical support to both internal teams and external clients. This is primarily an office-based role in the South East, with occasional travel to client or supplier sites as projects require. Key Responsibilities Design electrical, pneumatic and hydraulic schematics using Eplan Pro Panel Produce control panel layouts, wiring diagrams, cable schedules and component specifications Specify and source components in collaboration with purchasing and software teams to meet project and cost targets Select PLC/HMI hardware alongside software engineers Support service/spares teams with technical queries and parts sourcing Interpret customer specifications (URS) and ensure compliance with project requirements Ensure compliance with relevant electrical standards (e.g. BS7671, IEC 60204, ISO 13849, UL508A, NFPA79, AS3000) Provide technical input to sales enquiries where required Support product quality, testing, inspection and documentation activities Maintain design integrity through calculations and technical reporting Identify replacement solutions for obsolete components Work across low-voltage AC (110V600V) and extra-low voltage DC systems (typically 24V) Qualifications & Experience Electrical engineering background, ideally HNC/HND qualified or above Practical electrical wiring experience (mechanical experience beneficial) Electrical CAD experience (Eplan Pro Panel highly desirable) Strong Microsoft Office skills (Word, Excel) Ability to manage multiple projects with a flexible, problem-solving approach Strong technical drawing interpretation skills and attention to detail Desirable Experience Control panel design for international markets (e.g. US, Australia) BS7671 qualification Knowledge of PLC platforms such as Mitsubishi, Allen Bradley or Siemens Familiarity with industrial networking (Ethernet/IP, Modbus TCP, RS232, RS485 etc.) Why Consider This Role? Join a stable, technically respected engineering business Work on varied, technically interesting projects Collaborative engineering environment with strong cross-functional support Opportunity to develop technical expertise and career progression Competitive salary and benefits package To Apply: Contact Alison Basson - 07814 547440 Ref: ABJ6480 TPBN1_UKTJ