Trabajos system engineer en PlymouthCrear alertas

Are you a skilled 7.5 Tonne (C1) Driver looking for a new challenge with a reputable company? Are you ready to join a dynamic team where your driving expertise will be valued? Do you have a passion for driving and a knack for delivering smiles along with B&Q products to customer’s homes? If so, this might be the opportunity for you! \n \n Here at GXO, we’re working together with B&Q and are looking for a highly experienced 7.5 Tonne Driver to join our Store to Home team in Plymouth (PL6 5US). \n \n You’ll be working on a full-time, permanent basis, following a two-week rotating shift pattern: Week 1 – Monday to Friday / Week 2 – Sunday to Thursday, with a start time at 11:00. The role is contracted to 40 hours per week. \n \n Pay, benefits and more: \n \n As a Driver, you’ll receive a competitive pay and benefits package, depending on the licence held: \n \n Pay Rates: \n \n 7.5 Tonne Driver \n \n\n • An hourly rate of £13.92, that is an annual salary of £28,953.60\n, • Overtime pay of £20.88 per hour (when applicable, paid over 40hrs)\n, • On-going annual CPC training\n, • Holiday pay and Workplace pension\n, • B&Q store discount upon successful completion of probation period\n, • A 24/7 online GP service, life assurance and a fully comprehensive employee assistance programme\n, • Access to our MyBenefits platform offering a variety of high street discounts, cashback cards, a saving scheme and much more!\n, • Access to GXO University – home to a wealth of online training courses, meaning your development never ends!\n, • Career development opportunities, including fully funded Lorry Loader Driver training through GXO, helping you gain additional qualifications and expand your driving skills.\n\n \n What you’ll do on a typical day: \n \n\n • Work as part of a two-person team delivering products to customer premises (room of choice) on multidrop basis – an average of 16 drops per day off peak and 24 drop per day in peak season\n, • Maintain accurate driving/working time records using the Tachomaster system and manual entries to record all working hours as required by the WTD regulations\n, • Operate company vehicles in a safe, legal, and efficient manner\n, • Ensure all products are checked off the vehicle and the customer receives the correct products and delivery documentation\n, • Keep customers informed of their estimated time of delivery and where issues occur communicate with them in a polite and courteous manner\n\n \n What you need to succeed at GXO: \n \n\n • Previous experience in multidrop, store deliveries preferable but not essential\n, • A full UK driving licence with category C1 Entitlement\n, • No more than 6 penalty points on your licence (no DD, DR, DG, BA, CD, AC, LC or TT endorsements)\n, • An up-to-date CPC and Digital Tachograph\n, • Excellent customer service skills, both written and verbal\n, • Willingness to undertake pre-employment Disclosure and Barring Service (DBS Check)\n, • Be prepared to commute to Plymouth (PL6 5US) for the required shift pattern\n\n #bqstore \n We engineer faster, smarter, leaner supply chains. \n GXO is a leading provider of cutting-edge supply chain solutions to the most successful companies in the world. We help our customers manage their goods most efficiently using our technology and services. Our greatest strength is our global team – energetic, innovative people of all experience levels and talents who make GXO a great place to work. GXO is an equal opportunity employer. We celebrate, support and thrive on diversity and are committed to creating an inclusive environment for all employees. We believe that diversity and inclusion in our business is critical to our success as a global company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool. We are an Armed Forces friendly organisation and Disability Confident Leader as part of the Disability Confident Scheme (GIS) and actively welcome applications from people with disabilities. \n \n The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All employees may be required to perform duties outside of their normal responsibilities from time to time, as needed. Review GXO's candidate privacy statement

Operations Engineer - Rebuild National, Great Britain (field-based) About Edina Established in 1985, Edina is a leading international power generation specialist, delivering low-carbon, cost-effective energy and battery storage solutions. Using diverse fuel sources like biogas, natural gas, and landfill gas, Edina supports clients in improving energy efficiency, reducing emissions, and achieving net zero goals. With over 200 professionals and global operations, we combine innovative technology, in-house manufacturing, and strong customer values - sustainability, flexibility, and integrity - to provide reliable, tailored power solutions and exceptional after-sales support across public and industrial sectors. We aim to build long-lasting partnerships with our customers in support of their project requirements to deliver market-leading power generation solutions to reduce energy costs and guide our clients through the transition to net carbon zero. Backed by a dedicated in-house manufacturing division, skilled professionals, and a proven track record across public and industrial markets worldwide, we cover the full spectrum, delivering reliable, forward-thinking power generation solutions with an after-sales service. We are currently looking for an Operations Engineer to join our team on a permanent, full-time basis. The Benefits • Competitive salary, • Attractive overtime rates, • 25 days' annual leave plus local Statutory Holidays, • Enhanced Holiday Entitlement based on length of service, • Company pension scheme with attractive employer contribution percentage, • Company van, • Private healthcare scheme, • Life Insurance, • Employee Assistance Programme, • Cycle to Work Scheme, • Career development opportunities, • Continued investment in employee training to further enhance knowledge, expertise and creativity This is a brilliant opportunity for a qualified engineer with strong mechanical and electrical expertise to join our innovative, forward-thinking organisation. With an exciting and varied workload across diverse sites and industries, you'll enjoy the satisfaction of tackling complex challenges, honing your technical skills, and playing a vital role in ensuring our power solutions keep businesses running and communities connected. What's more, you'll be part of a collaborative team that values your expertise and invests in your growth as you gain access to ongoing training, career progression opportunities, and the latest tools and technology while helping clients achieve their net zero ambitions! The Role As an Operations Engineer, you'll take responsibility for maintaining and repairing gas and diesel engine installations at client sites throughout the UK. Carrying out scheduled and reactive maintenance, you will undertake fault-finding both locally and remotely and play a key role in keeping systems running smoothly across a wide range of sites. You'll also diagnose technical issues, implement first-time fixes where possible, and ensure all work is completed in line with the manufacturer's instructions and service schedules. Additionally, you will: • Oversee the servicing and maintenance of engines and ancillary equipment, • Plan resources and parts for repairs, • Co-ordinate with parts and service teams to support successful after-sales contracts, • Liaise with contractors, third parties, and colleagues About You To be considered as an Operations Engineer, you'll need: • To hold a minimum of an ONC, NVQ Level 2 or City & Guilds Level 2 qualification in a mechanical and/or electrical based discipline, • To be a competent time-served technician, preferably with a minimum of three years' industrial mechanical experience, • To have considerable skills and in-depth knowledge of engine and/or generator fundamentals, • To have effective IT skills and competency in the use of Microsoft Office packages, • To hold a full, valid driving licence Hours of Work: Monday - Friday 8.00am - 4.30pm This role will involve weekend work and possible out-of-hours work. You will be required to participate in an established 24-hour callout program based on a rota system. Other companies may call this role Installation Engineer, Field Service Engineer, Engine Maintenance Technician, Electrical Engineer, Mechanical Engineer, Senior Field Service Technician, or Maintenance Technician. The closing date for applications is 4.00pm on Tuesday 3rd November 2026. Due to a fast-moving market, positions may be filled on short notice, and the deadline date may be brought to a close early. Please apply early to avoid disappointment. We are an employer committed to equal opportunities, and our company is sponsored. (This position may not meet the requirements for sponsorship). So, if you'd like to join us as an Operations Engineer, please apply via the button shown. This vacancy is being advertised by Webrecruit. The services advertised by Webrecruit are those of an Employment Agency. JBRP1_UKTJ

Multi-Skilled Maintenance Engineer Check all associated application documentation thoroughly before clicking on the apply button at the bottom of this description. Permanent Night Shift We are looking for a skilled Multi-Skilled Maintenance Engineer to join an established engineering team within a busy manufacturing environment in Plymouth. This is a hands-on role suited to an engineer with strong electrical and mechanical fault-finding skills, who enjoys solving technical problems and keeping production equipment operating safely and efficiently. Working across a variety of production machinery, automated equipment and associated manufacturing systems, you will play an important role in minimising downtime, improving equipment reliability and supporting continuous improvement across the site. This is an excellent opportunity for a proactive engineer looking to develop their technical expertise and potentially progress into a future leadership position. Key Responsibilities • Respond to equipment breakdowns, diagnosing faults and carrying out effective, long-term repairs to minimise production downtime., • Carry out planned preventative maintenance (PPM) to ensure machinery and equipment remain safe, reliable and efficient., • Undertake electrical fault-finding across manufacturing machinery, drives, safety circuits and associated equipment., • Diagnose and resolve mechanical, pneumatic and hydraulic faults., • Support maintenance activities across a variety of production machinery, automated equipment and site services., • Identify recurring faults and contribute to root cause analysis and continuous improvement initiatives., • Accurately record maintenance activities, faults, repairs and parts used within a computerised maintenance management system (CMMS)., • Support the installation, commissioning and testing of new equipment., • Work closely with Production, Quality and Engineering colleagues to maintain operational performance and product quality., • Follow all health and safety procedures, risk assessments and safe systems of work., • Maintain a clean, organised and safe working environment., • Provide technical support and guidance to colleagues where required. Skills and Experience Essential: • ONC, NVQ Level 3 or an equivalent engineering qualification., • Completion of a recognised apprenticeship in a relevant engineering discipline., • Experience in a manufacturing, production, processing or similar industrial environment., • Strong electrical fault-finding and diagnostic skills., • Good mechanical maintenance and problem-solving ability., • Experience working with pneumatics, hydraulics and variable speed drives., • Experience carrying out planned and reactive maintenance, fault-finding, equipment repairs and accurate maintenance record-keeping., • Understanding of health and safety requirements and safe working practices., • A structured approach to troubleshooting, with the ability to identify root causes and implement lasting solutions. Desirable: • Experience maintaining automated production equipment or other complex manufacturing systems., • Knowledge of continuous improvement methodologies, such as Lean, TPM or RCM., • Familiarity with root cause analysis tools, including 5 Whys and fishbone diagrams., • Experience supporting equipment installation, commissioning or acceptance testing., • A full UK driving licence. The Ideal Candidate You will be a practical, hands-on engineer who takes pride in maintaining equipment to a high standard. You will be comfortable working independently, responding calmly to breakdowns and prioritising tasks in a fast-paced manufacturing environment. Strong communication skills and a collaborative approach are important, as you will work closely with colleagues across engineering and production. You will also be keen to identify opportunities to improve reliability, reduce downtime and develop your technical knowledge. What’s on Offer? • A permanent night-shift opportunity within an established manufacturing engineering team., • A varied role covering electrical, mechanical and automated equipment., • The opportunity to contribute to ongoing reliability and continuous improvement projects. xrnqpay, • Scope to develop your technical skills and progress towards future engineering leadership opportunities. If you are a Multi-Skilled Maintenance Engineer looking for your next opportunity in Plymouth and are interested in working nights, we would be keen to hear from you

Domestic Gas Engineer Hampshire £45,000 – £50,000 per annum An excellent opportunity has arisen for a qualified Domestic Gas Engineer to join a well-established company covering Hampshire. This role is ideal for an experienced engineer with a background in domestic gas maintenance, servicing, repairs and installations, working across a local portfolio of residential properties. The Role: • Carrying out servicing, maintenance and repairs on domestic gas appliances., • Installing and replacing domestic boilers, heating systems and associated components., • Diagnosing faults and completing remedial works., • Undertaking annual gas safety checks and landlord gas safety inspections., • Carrying out boiler installations, replacements and heating system upgrades., • Completing general plumbing repairs and maintenance where required., • Ensuring all maintenance and installation work complies with current gas safety regulations., • Completing relevant documentation, service reports and compliance records., • Providing a professional service to customers and clients. Requirements:, • Valid ACS Gas Qualifications, including:, • CCN1 – Core Domestic Gas Safety, • CENWAT – Central Heating Boilers and Water Heaters, • CPA1 – Combustion Performance Analysis, • CKR1 – Domestic Cookers (desirable), • HTR1 – Domestic Gas Fires (desirable), • Gas Safe registered., • Previous experience in domestic gas servicing, maintenance, fault-finding and installations., • Experience installing and replacing domestic boilers and heating systems., • Good diagnostic and problem-solving skills., • Full UK driving licence., • Plumbing experience is desirable, particularly with domestic heating systems and general plumbing repairs. What's on Offer:, • Salary of £45,000 – £50,000 per annum., • Work covering the Hampshire area., • Opportunity to join an established company., • A varied role involving domestic gas maintenance, servicing, repairs and installations., • The opportunity to work across a local portfolio of residential properties. If you're a qualified Domestic Gas Engineer with experience in maintenance and installations and are looking for your next opportunity in Hampshire, we'd be keen to hear from you. JBRP1_UKTJ

If you're an electrically qualified Maintenance Engineer, Electrical Technician or Site Services Engineer looking for a varied, days-based role with a strong focus on electrical infrastructure and industrial utilities, we'd love to hear from you. Experience maintaining electrical distribution system

Date Posted: 2026-09-23 Country: United Kingdom Location: Plymouth, Plymouth Position Role Type: Hybrid Joining Collins Aerospace isn’t just about finding a job; it’s about embarking on a journey to redefine the future of aerospace technology. Collins Aerospace, an RTX business, is a leader in technologically advanced and intelligent solutions for the global aerospace and defence industry. With extensive capabilities, a comprehensive portfolio and broad expertise, we solve some of our customers’ toughest challenges and help meet the demands of a rapidly evolving global market. We are currently seeking a Senior Electronics Systems Engineer to join our team in Plymouth or Bristol, UK (Hybrid). Collins Aerospace was selected as a UK supplier with a demonstrated capability to develop and manufacture navigation-grade Inertial Measurement Units (IMUs) for use in future complex weapons systems as part of the UK’s Weapons Sector Research Framework (WSRF). Our IMUs combine proprietary MEMS sensors, ASICs, FPGAs, embedded software and unique architectures, housed within bespoke mechanical fixtures designed to withstand extreme environmental conditions. This is an opportunity to join a highly skilled electronics team working on the design and development of high-performance, world-class IMUs and MEMS sensor technologies. As a Senior Electronics Systems Engineer, you will apply your expertise in mixed-signal electronic design and system-level integration to support the development of complex, high-performance products. You will: • Design, develop and test analogue, digital and mixed-signal electronics across the full product lifecycle for new and legacy products and test equipment., • Support hardware integration testing, troubleshooting and problem solving., • Use E-CAD tools for schematic capture, PCB layout and circuit/PCB simulation., • Work closely with Systems, Software, Mechanical and other engineering disciplines to deliver integrated solutions., • A minimum 2:1 Bachelor’s degree in Electronics Engineering or a closely related discipline., • A strong theoretical understanding of analogue electronics., • Experience integrating sensitive analogue circuitry with high-speed digital devices such as FPGAs, DSPs and microprocessors., • Experience designing precision circuitry, including op-amps, DACs, ADCs and voltage references., • An understanding of control theory and open and closed-loop systems., • Experience using E-CAD systems for schematic capture, PCB layout and circuit/PCB simulation. We would also be interested in experience in one or more of the following areas: • Xpedition, HyperLynx, LTSpice/AMS or similar tools., • VHDL/Verilog architectural design, coding and simulation, particularly with Xilinx or Microchip technologies, including SoC., • Embedded C/C++ for integration and problem solving., • MEMS sensor technology., • Competitive salary and benefits package., • Flexible working options., • Excellent 2:1 matched pension contribution (up to 10%)., • Private health insurance and life assurance., • 25 days annual leave plus the ability to buy or sell up to 5 more., • Early finish on Fridays., • Career development, mentorship, and world-class training opportunities., • And much more! Do you want to be a part of something bigger, with a team whose impact stretches across the world, and beyond? At Collins Aerospace, our Mission Systems team helps civilian, military and government customers complete their most complex missions - whatever and wherever they may be. Our customers depend on us for intelligent and secure communications, missionized systems for specialized aircraft and spacecraft and collaborative space solutions. By joining our team, you’ll have your own critical part to play in ensuring our customers succeed today while anticipating their needs for tomorrow. Are you up for the challenge? Join our mission today. Note: The successful candidate must hold an active or be willing and eligible to obtain SC level security clearance. Project access restrictions may also apply to some nationalities. Hybrid: Employees who are working in Hybrid roles will work regularly both onsite and offsite. Ratio of time working onsite will be determined in partnership with your leader. #J-18808-Ljbffr

Department: Engineering Employment Type: Full Time Location: Plymouth We are seeking an AI Data & Integration Engineer to connect Plessey's data and systems to AI. The company operates an advanced compound semiconductor fab and develops complex MicroLED display and optical interconnect technologies. This role will give AI agents secure, efficient and reliable access to data from across the business, including manufacturing, engineering, quality and business systems, so they can deliver real outcomes. The successful candidate will combine strong data and software engineering skills with a deep understanding of how AI agents use tools and data. They will build the connections, shape the data so agents use it well, and prove through testing that agents can complete real work with it. Success in this role will be demonstrated by AI agents that answer questions and complete tasks accurately and efficiently using Plessey's data. This will include clear evidence of faster access to information, less time spent gathering and analysing data, and measurable productivity gains across fab operations, engineering and business functions. The role reports to the Lead AI Solutions Engineer and works closely with IT, data owners and teams across the business. As AI agents take on longer-running and more complex work, this role will make sure Plessey's data is ready for them: secure, well structured and efficient to use. • Map Plessey's data sources with their owners: structure, quality, sensitivity and who should see what., • Build pipelines that turn raw fab data into agent-ready data: tool logs, recipes, statistical process control, metrology, test and inspection data., • Build and own the connectors that give AI agents access to company data and systems, using the Model Context Protocol (MCP). These include the Manufacturing Execution System (MES) data warehouse, Microsoft 365, engineering file shares, tool and process data, and business systems., • Design connections that agents can use effectively and efficiently: easy to find and understand, economical with tokens and cost, and ready for longer-running, multi-step and event-driven work., • Prove every connection works by testing it with real agents on real Plessey tasks, measuring accuracy and cost, and monitoring it in production without degrading source systems., • Secure every connection so people only reach data they’re already entitled to. Protect personal, commercially sensitive and IP data, guard against AI-specific risks such as prompt injection, and keep full audit trails., • Work with production, engineering, quality and business teams, IT, data owners and vendors to turn real needs into documented connections that deliver measurable gains., • Fully committed to AI: uses AI tools every day, keeps pace with the latest models and agent capabilities, and believes in a future where AI is part of everything we do., • Strong software engineering in Python, with production experience of APIs, services and data pipelines., • Strong experience working with databases and large, complex datasets., • Good understanding of how LLM agents use tools, and what makes a tool easy or hard for an agent to use., • Experience testing or evaluating LLM systems for accuracy, reliability and cost., • Practical knowledge of token efficiency in LLM systems., • Experience with AWS (or a comparable cloud), containers and infrastructure as code., • Understanding of identity and access control: OAuth 2.0, single sign-on, least privilege., • A disciplined approach to security, privacy and safe access to production systems., • Ability to work with engineers, operators and managers to understand what they need from their data., • Experience building Model Context Protocol servers or tools for AI agents. Experience with Amazon Bedrock or Anthropics Claude models and agent tooling., • Experience with semiconductor, photonics or advanced manufacturing data, Manufacturing Execution Systems, statistical process control, yield or equipment data., • Experience with big data platforms and tools, such as data lakes, data warehouses and distributed processing., • Experience with event-driven systems and observability tools., • Experience in a secure, IP-sensitive environment, including Data Protection Impact Assessments and information security reviews., • Pension scheme, • Private medical & dental insurance, • 28 days' holiday + bank holidays, • Free onsite meals, • Onsite gym, • Relocation support, • Visa support available #J-18808-Ljbffr

Plymouth | Hybrid - 3 Days On Site £45 per hour | Inside IR35 | Contract MUST HAVE NUCLEAR EXPERIENCE Are you an experienced EC&I Engineer with a background in the nuclear sector and looking for your next challenging project? We are currently seeking an EC&I Senior Engineer to join a major engineering programme at Devonport Royal Dockyard in Plymouth, supporting the delivery of critical infrastructure for the UK's submarine and warship programmes. This is an excellent opportunity to become part of a high-profile, multi-disciplinary engineering team delivering a major Submarine Defuel Delivery Project (SDDP), including the design and implementation of the Reactor Access House (RAH) and its associated tools and systems. The Devonport site is undergoing significant infrastructure investment to support the UK's future submarine and warship programmes. As part of the 14 Dock Readiness Programme, the Submarine Defuel Delivery Project is delivering the infrastructure, equipment and systems required to establish a defuel capability for out-of-service submarines. • Deliver EC&I engineering activities to the required scope, quality, schedule and cost., • Support the Design Manager in the successful delivery of project scope and EC&I work packages., • Take responsibility for technical aspects of EC&I packages, including the development and updating of documentation and drawings from detailed design through to as-built status., • Undertake EC&I inspections and site surveys, ensuring installed systems comply with manufacturing drawings and the approved reference design., • Produce and review technical design documentation, drawings and engineering records., • Ensure appropriate configuration, quality and document controls are maintained throughout the project., • Work in accordance with the company's Business Management System, Technical Manual and relevant engineering procedures., • Support the implementation of effective Quality Management Arrangements., • Identify and communicate engineering hazards and risks, supporting appropriate risk assessments and controls., • Work collaboratively with engineering, design, construction and commissioning teams., • Provide technical input and engineering support throughout project delivery., • Proven experience working as an EC&I Engineer within the nuclear sector., • Experience in the design and development of EC&I systems., • Strong as-built engineering experience, including site surveys and production/updating of as-built drawings., • Experience developing and reviewing technical design documentation., • Sound understanding of engineering design principles and safety practices within a regulated environment., • Good understanding of engineering quality and configuration management requirements., • Ability to work within formal engineering, health & safety and quality procedures., • Experience using relevant engineering design and computer applications., • Degree or equivalent qualification in EC&I Engineering or a related discipline., • Chartered Engineer status or working towards Chartered status., • Membership of a relevant professional engineering institution., • Experience of working on nuclear infrastructure, defence or submarine programmes., • Experience working within complex, safety-critical engineering environments. This is a fantastic opportunity for an experienced nuclear EC&I professional to work on a high-value, technically challenging infrastructure programme at one of the UK's most strategically important engineering sites. You will be joining a project that directly supports the UK's submarine capability, working alongside experienced engineering professionals across multiple disciplines. If you have strong nuclear EC&I design experience, particularly with surveys and as-built documentation, we’d be keen to hear from you #J-18808-Ljbffr

MacLean-Fogg is hiring a Controls Engineer at our Plymouth, Michigan manufacturing facility. In this role, you will design, develop, maintain, and troubleshoot control and automation systems that support manufacturing efficiency, quality, safety, and reliability. • Location: Plymouth, MI, • Work Arrangement: On-site, • Schedule: 1st Shift, • Pay: $80,000-$100,000 per year, • Employment Type: Full-time / Salary, • Design, develop, and implement automation systems for manufacturing and related processes using control systems, instrumentation, and automation technologies., • Develop new and modify existing PLC, HMI, and embedded control applications and interfaces to meet operational requirements., • Support the setup and commissioning of new manufacturing facilities and upgrades to existing control systems., • Diagnose, troubleshoot, and resolve control system malfunctions and complex technical issues., • Recommend system improvements that enhance operational efficiency, reliability, quality, and performance., • Create and maintain detailed specifications, system configurations, operational procedures, and other technical documentation., • Work cross-functionally with engineering, operations, and maintenance teams to support the effective deployment and operation of control systems., • Bachelor's degree., • 2-4 years of hands-on experience in control systems engineering, PLC programming, HMI development, and automation., • Strong understanding of control systems, PLC programming platforms such as Siemens and Rockwell, HMI development, and embedded systems., • Strong critical thinking and troubleshooting skills with the ability to diagnose complex issues and implement effective solutions., • Solid math and analytical abilities for problem-solving and system optimization., • Intermediate verbal and written communication skills., • Ability to collaborate effectively with cross-functional teams in a fast-paced environment., • High level of accuracy and attention to detail in technical work and documentation. Eligible employees across MacLean-Fogg and its affiliated companies have access to a comprehensive benefits program designed to support health, financial well-being, time away, and development. This position is eligible for benefits that include: • Medical, dental, and vision coverage, • 401(k) with company match and potential profit sharing, • Paid time off and paid holidays, • Health Savings Account contributions for eligible plans, • Company-paid life insurance and short-term disability coverage, • Paid parental leave, • Employee Assistance Program and mental health resources, • Virtual healthcare resources, • Tuition reimbursement and development opportunities, • Additional wellness, financial, and employee programs Benefits are subject to applicable plan terms and eligibility requirements. Explore our full benefits and interactive resources: After a conditional offer, this position requires a pre-employment drug screen and criminal background check. Screening and employment decisions are administered consistent with applicable law and the requirements of the position. MacLean-Fogg is a fourth-generation, family-owned American manufacturing company headquartered in Mundelein, Illinois. Founded in 1925, we design and manufacture engineered components and solutions for automotive and industrial markets. Our portfolio includes MacLean-Fogg Component Solutions, OMCO, Mallard Manufacturing, and Threadstrong. Across our companies, we share a commitment to Integrity, People, Customers, and Stewardship while investing in our people, manufacturing capabilities, customers, and communities. MacLean-Fogg and its affiliated companies are equal opportunity employers. We provide equal employment opportunities to qualified applicants and employees without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, ancestry, age, disability, genetic information, military or veteran status, marital status, or any other characteristic protected by applicable law. If you need a reasonable accommodation to apply, complete an assessment, or participate in the hiring process, contact . #ind-exempt #J-18808-Ljbffr

STARK is seeking a Systems Engineer to lead the integration of Unmanned Surface Vehicles (USVs) and associated subsystems, spanning mechanical, electrical, and software domains. You will define architecture, interfaces, and verification plans to ensure a mission-ready platform. You will work with cross-disciplinary teams across the lifecycle, perform system trade studies, and drive sea trials and acceptance testing. UK travel and security clearance eligibility are required. #J-18808-Ljbffr

Collins Aerospace in the UK invites applications for a Senior Electronics Systems Engineer based in Plymouth or Bristol. The role combines analog/digital design, system-level integration and collaboration with multi-disciplinary teams in a hybrid work model. The successful candidate will design, test and qualify mixed-signal electronics across the product lifecycle, using E-CAD tools and engaging with software, hardware and mechanical teams to deliver robust IMU and MEMS sensor technologies. #J-18808-Ljbffr

The biggest problems of today and our future rest on the ocean. Our weather and climate is mostly driven, and regulated, by the ocean. Extreme weather is born on its surface: hurricanes form, strengthen, and track across open water before they reach land. We collect real-time ocean data that feeds into forecast models, helping authorities predict storm intensity sooner and get people evacuated in time. That data saves lives. Below the surface, the stakes are just as high. Undersea internet cables carry 99% of global data. Energy pipelines cross ocean floors. And in those dark waters, threats are growing — from dark ships to deliberate attacks on critical infrastructure. We can detect those threats at a scale and cost that has never been possible before. Our solution: constellations of 1 metre, wind-powered autonomous robots, the ocean's eyes and ears. Persistent. Navigable. Deployable at scale. Finally giving humanity a live, continuous, wide area picture of the ocean we've always been missing. Our autonomous vessels spend months alone at sea. Every decision they make - from navigating changing sea states to collecting sensor data, communicating with shore, and managing power - depends on reliable embedded software. • Become a key technical owner of the firmware systems that power the C-Star platform, • Design and delivery of production-grade embedded software for deployed autonomous systems, • Contribute to the evolution of the firmware architecture as the platform and fleet continue to scale, • Firmware reliability, performance, power management, fleet update capability, and maintainability across deployed vessels, • Development of testing, CI/CD, containerised builds, code review, documentation, and collaborative development workflows, • Close collaboration with electronics, hardware, cloud, autonomy, and product teams to bridge firmware with the wider technology stack, • Debugging hardware/software interactions in the lab, on the bench, and in real deployment contexts, • Mentoring junior engineers as the firmware team grows and helping shape the long-term firmware roadmap, • Strong embedded C/C++ firmware development experience on shipped, production products, • Experience developing firmware for resource-constrained embedded systems, • Experience with STM32 or comparable ARM Cortex-M microcontrollers, • RTOS experience, ideally FreeRTOS, including task management, queues, semaphores, and inter-task communication, • Strong software architecture and system design skills, • Comfortable working at the hardware/software boundary, including reading schematics, debugging on the bench, and working with SPI, I2C, UART, and similar protocols, • Experience with collaborative engineering practices such as Git workflows, code review, documentation, and maintainable development processes, • Ability to work independently in an ambiguous environment and make sound engineering decisions without heavy oversight, • Clear, structured communication and the ability to surface risks, unknowns, and blockers early, • Robotics, drones, aerospace, marine, defence, automotive, or IoT experience, • Autonomous systems, sensor fusion, GPS, IMU, acoustic, or environmental sensor experience, • Satellite communications, Iridium, RockBlock, LoRa, cellular, VHF, or other low-power wireless systems, • Low-power firmware design, duty cycling, and resource-constrained embedded systems, • Signal processing, acoustic analysis, edge compute, or embedded AI/ML experience, • Experience building development tooling, testing frameworks, CI/CD, or multi-developer firmware workflows You're a curious, hands-on engineer who enjoys solving difficult problems and taking ownership of outcomes. You communicate clearly, collaborate effectively across disciplines, and thrive in environments that value autonomy, trust, and continuous learning. • Work on technology that tackles one of society’s biggest blind spots: understanding and monitoring the world’s oceans, • Build autonomous systems that need to survive for months at sea in some of the harshest environments on Earth, • Solve hard engineering problems across embedded systems, robotics, electronics, communications, and autonomy, • Join a small, intense team with high autonomy, high expectations, and real technical ownership, • See your work deployed in the real world, not sitting in a lab or waiting years, months, for release, • Be part of a company that has already delivered world first missions, delivers data that can help save lives, works with leading scientific and defence partners, and is now scaling its fleet We're tackling engineering problems that don't have obvious answers. Success will need curiosity, resilience, collaboration, and a willingness to learn as we go. If you're motivated by difficult challenges, enjoy working with a high degree of autonomy, and want to build technology that has real-world impact, you'll feel at home at Oshen. • Competitive salary, depending on experience, • Meaningful equity package for the right candidate, • Opportunity to work closely with the founders and a multidisciplinary engineering team, • Professional growth and development opportunities, • Mission-driven work with real-world impact Working Model: In person in Plymouth, UK. Regular on-site presence is required for hardware-in-the-loop development, lab work, and collaboration with the physical C-Star platform.We're open to paying for relocation costs for the right candidate. #J-18808-Ljbffr

2026-08-24 United Kingdom Plymouth, Plymouth Hybrid At Collins Aerospace, a Raytheon Technologies company, we are a global leader in advanced aerospace and defence technologies. Our expertise in inertial sensing, integrated navigation, flight control and stabilisation solutions enables us to deliver innovative systems that solve some of our customers' most complex challenges. Based at our Plymouth site, we design and manufacture world-class control, navigation and guidance systems for air and surface applications. Our portfolio includes industry-leading MEMS-based Inertial Measurement Units (IMUs) and the TERPROM® Digital Terrain Reference Navigation System. We are looking for a Software Engineer to join our collaborative engineering team in a hybrid role based in Plymouth, helping to shape the future of aerospace navigation technologies. As a Software Engineer, you will contribute across the full software development lifecycle, supporting the design, development, integration and verification of embedded software solutions. Key responsibilities include: • Supporting requirements analysis activities, • Translating system requirements into detailed software requirements, • Developing user stories and use cases, • Designing embedded software architectures and detailed software designs, • Producing test specifications and verification procedures, • Developing embedded software, primarily in C, with some C++ for support systems and tools, • Verifying software against requirements and design specifications, • Performing hardware and software integration activitiesSupporting performance qualification and validation testing, • Developing software test tools and utilities, • Working effectively within cross-functional engineering teams, • Degree qualification in Software Engineering, Computer Science, Electronics, Aerospace Engineering or a related discipline, or equivalent industry experience, • Experience working across the full Software Development Life Cycle (SDLC), • Experience developing real-time embedded software applications, • Strong programming skills in C, with exposure to C++, • Familiarity with Integrated Development Environments (IDEs), • Excellent communication and technical documentation skills, • Strong team-working capabilities combined with a proactive, self-motivated approach, • A customer-focused mindset with attention to quality and detail, • Experience using Visual Studio or similar development environments While not essential, the following experience would be advantageous: • Experience using software modelling and design tools such as Enterprise Architect, • Understanding of UML and software design methodologies, • Knowledge of version control systems such as Git, SVN or PVCS, • Experience with Test Driven Development (TDD), • Familiarity with Ada programming language and GNAT Pro Studio, • Experience contributing to project planning, estimation or bid activities, • Exposure to Python, MATLAB or Simulink, • Experience working within aerospace, defence or other safety‑critical industries, • Competitive salary and comprehensive benefits package., • Flexible working arrangements., • Excellent 2:1 matched pension contribution (up to 10%)., • Private healthcare and life assurance., • 25 days annual leave plus the option to buy or sell up to 5 days., • Early finish Fridays and a culture that values work life balance., • Ongoing career development, mentorship, and world class training. Employees who are working in Hybrid roles will work regularly both onsite and offsite. Ratio of time working onsite will be determined in partnership with your leader. If you're passionate about innovation, precision, and purpose - and you're ready to make a real impact in aerospace and defence - then we'd love to hear from you. Note: The successful candidate must hold an active or be willing and eligible to obtain SC level security clearance. #J-18808-Ljbffr

Department: Engineering Employment Type: Full Time Location: Plymouth We are seeking an AI Data & Integration Engineer to connect Plessey's data and systems to AI. The company operates an advanced compound semiconductor fab and develops complex MicroLED display and optical interconnect technologies. This role will give AI agents secure, efficient and reliable access to data from across the business, including manufacturing, engineering, quality and business systems, so they can deliver real outcomes. The successful candidate will combine strong data and software engineering skills with a deep understanding of how AI agents use tools and data. They will build the connections, shape the data so agents use it well, and prove through testing that agents can complete real work with it. Success in this role will be demonstrated by AI agents that answer questions and complete tasks accurately and efficiently using Plessey's data. This will include clear evidence of faster access to information, less time spent gathering and analysing data, and measurable productivity gains across fab operations, engineering and business functions. The role reports to the Lead AI Solutions Engineer and works closely with IT, data owners and teams across the business. As AI agents take on longer-running and more complex work, this role will make sure Plessey's data is ready for them: secure, well structured and efficient to use. • Map Plessey's data sources with their owners: structure, quality, sensitivity and who should see what., • Build pipelines that turn raw fab data into agent-ready data: tool logs, recipes, statistical process control, metrology, test and inspection data., • Build and own the connectors that give AI agents access to company data and systems, using the Model Context Protocol (MCP). These include the Manufacturing Execution System (MES) data warehouse, Microsoft 365, engineering file shares, tool and process data, and business systems., • Design connections that agents can use effectively and efficiently: easy to find and understand, economical with tokens and cost, and ready for longer-running, multi-step and event-driven work., • Prove every connection works by testing it with real agents on real Plessey tasks, measuring accuracy and cost, and monitoring it in production without degrading source systems., • Secure every connection so people only reach data they’re already entitled to. Protect personal, commercially sensitive and IP data, guard against AI-specific risks such as prompt injection, and keep full audit trails., • Work with production, engineering, quality and business teams, IT, data owners and vendors to turn real needs into documented connections that deliver measurable gains., • Fully committed to AI: uses AI tools every day, keeps pace with the latest models and agent capabilities, and believes in a future where AI is part of everything we do., • Strong software engineering in Python, with production experience of APIs, services and data pipelines., • Strong experience working with databases and large, complex datasets., • Good understanding of how LLM agents use tools, and what makes a tool easy or hard for an agent to use., • Experience testing or evaluating LLM systems for accuracy, reliability and cost., • Practical knowledge of token efficiency in LLM systems., • Experience with AWS (or a comparable cloud), containers and infrastructure as code., • Understanding of identity and access control: OAuth 2.0, single sign-on, least privilege., • A disciplined approach to security, privacy and safe access to production systems., • Ability to work with engineers, operators and managers to understand what they need from their data., • Experience building Model Context Protocol servers or tools for AI agents. Experience with Amazon Bedrock or Anthropics Claude models and agent tooling., • Experience with semiconductor, photonics or advanced manufacturing data, Manufacturing Execution Systems, statistical process control, yield or equipment data., • Experience with big data platforms and tools, such as data lakes, data warehouses and distributed processing., • Experience with event-driven systems and observability tools., • Experience in a secure, IP-sensitive environment, including Data Protection Impact Assessments and information security reviews., • Pension scheme, • Private medical & dental insurance, • 28 days' holiday + bank holidays, • Free onsite meals, • Onsite gym, • Relocation support, • Visa support available #J-18808-Ljbffr

To deliver the MoD’s submarine and warship programmes, a significant programme of infrastructure investment is required on the Devonport site. The ‘Major Infrastructure Projects’ (MIP) Business Unit has been established to support this. One of the key scope elements within MIP is establishing a defuel capability for out of service submarines, which is delivered under the programme banner of 14 Dock Readiness. This work comprises of several interrelated projects to develop various multi-disciplinary infrastructure systems, with an overall value more than £100m. The Submarine Defuel Delivery Project (SDDP) sits within the Dock Readiness programme. SDDP provides the Reactor Access House (RAH) which supplies the necessary tools and systems to defuel submarine. This role is part of that Engineering Team that is delivering the design and implementation of the RAH and its associated tools and systems The primary purpose of the role is to ultimately assist and support the Design Manager in the delivery of project scope. This will include the likes of the following: • To undertake the delivery of EC&I activities to the required scope, quality, schedule and cost., • Responsible for technical aspects of the EC&I work packages, specifically updating documentation and drawings from detailed design to as-built status., • Undertake inspection and surveys of EC&I systems to ensure compliance with manufacturing drawings and the reference design., • Ensuring effective Quality Management Arrangements, operate and deliver through compliance with Babcock’s Business Management System and Technical Manual., • Support ensuring that the processes and activities being undertaken are appropriately documented with appropriate records maintained and configuration and quality controls applied., • Support ensuring that staff and contractors are familiar with the hazards and risks associated with the work undertaken by the delegated engineering team through effective management and communication of the Risk Assessment., • Experience of designing EC&I systems, preferably in a nuclear context., • As-built experience, including surveys and as-built drawings., • Be able to demonstrate relevant knowledge and skills required in technical design development., • Sound understanding of engineering design and safety practice as relevant to discipline, post and project requirements., • Sound understanding of Company and departmental procedures relating to Design, Health & Safety and Quality requirements, and ability to manage tasks in accordance with these procedures., • Working knowledge of relevant engineering computer applications. The candidate will have a degree or equivalent in a EC&I Engineering related discipline. Preferably working towards Chartered Engineer status and member of relevant institute. • Site Induction, • Fire Safety, • Diversity, • Anti-bribery, • Data Protection #J-18808-Ljbffr

Electrical Design Engineer Certain Advantage is hiring for an Electrical Design Engineer based in the Southwest area. This role is on a permanent basis and is site-based. The Company We're working with an engineering company specialising in solving complex engineering challenges across industries—from Power Generation, Rail and more. Does this sound like your next career move? If you're ambitious to grow, this may be your next role? The Role: This role is for an Electrical Design Engineer—someone ambitious and ready to make an impact. You'll be results-oriented and driven to succeed. You'll be leading a small, experienced, and collaborative team, and be responsible for: • Development and delivery of electrical design packages from concept through to detailed design., • Producing engineering calculations, drawings, specifications and technical substantiation to support new installations, system modifications and infrastructure projects.The Individual We're looking for people who can show: • Degree or HND/HNC in Electrical Engineering or equivalent discipline., • Electrical design packages within a highly regulated industry., • Strong understanding of LV and HV power distribution systems., • Electrical calculations, technical specifications and design substantiation., • Knowledge of electrical design standards and industry codes of practice., • Knowledge of BS 7671, IEC standards and relevant industry regulations., • Experience using CAD and electrical design software.Desirable Attributes:, • Experience working in defence, nuclear, energy, infrastructure or industrial sectors., • Familiarity with ETAP, Amtech, Trimble, AutoCAD Electrical or similar design tools., • Experience supporting design reviews, hazard assessments and safety case documentation., • Strong communication, stakeholder management and technical report-writing skills.The Benefits:, • Salary circa £50 000 per annum, • Training and Development, • Career progressionDoes this sound like your next career move? Apply today. Working with Certain Advantage We go the extra mile to find the best people for the job. If you're hunting for a role where you can make an impact and grow your career, we'll work with you to find it. We work with businesses across the UK to find the best people in Finance, Marketing, IT and Engineering. If this job isn't for you, head to certainadvantage.co.uk and register for job alerts and career guidance tips. JBRP1_UKTJ

An experienced Quality Engineer who has strong experience within Quality tools like 8D, investigations, FMEA's PPAP and SPC is required for a large and reputable Manufacturing business based in Plymouth. Our client is able to offer a long term and progressive career within a Multi-National organisation. Main Duties: · To actively support the implementation, maintenance, performance and improvements of the quality management system by applying appropriate quality tools and techniques. · To provide training and support and to overcome barriers to quality improvement. · To work independently and as a team in conducting quality engineering activities. · To identify performance trends and potential and actual non-compliance in products and processes through data gathering, analysis, monitoring and auditing. · To work in line with Quality, Safety & environmental policies, procedures and work instructions. · Conduct root cause analysis and implement corrective ad preventative actions. · Decision making, Able to stop production, drive containment actions and take corrective or preventative measures, to ensure effective and timely defect management. · Carry out audits, inspections, measurements and test in a timely and effective manner. · Propose and implement robust and cost-effective solutions and improvements within Quality. · Evaluate and recommend new technologies and tools within quality engineering. · Develop relationships within all departments, suppliers and customers. · Control process control. · Customer performance monitoring and reporting. · Process data, trends and issues. · APQP – Support with NPI Projects. · Customer PAPP. · Gather information and report – giving feedback. · Document control. · Internal process and system audits. Education: · Minimum of BTEC – Ideally a HNC in Engineering/Science · Experience of Quality Tools (8D, FMEA's, PPAP and SPC) · Computer Literate & Excellent communication skills · Ideally Lean trained · Experience within a Precision Engineering environment · Minium of ISO9001 – Ideally 14001 & 45001 Audit experience · Ideally have working Lean knowledge within Six Sigma. TPBN1_UKTJ

We are recruiting a Maintenance Team Leader to join an established international manufacturing business at its Plymouth site. This is an opportunity for an experienced engineer with leadership skills to take responsibility for a maintenance team, ensuring production equipment and machinery operate safely, reliably and efficiently. The company specialises in engineered products and solutions for a range of industrial applications, with a strong focus on product quality, technical expertise and innovation. Its Plymouth facility combines advanced machinery and automation, with maintenance playing a key role in keeping operations running smoothly. The Role As Maintenance Team Leader, you will be responsible for coordinating the maintenance function and ensuring machinery, production equipment and site facilities remain safe, reliable and fit for purpose. You will lead a team of engineers, balancing day-to-day maintenance requirements with longer-term plans to improve equipment performance and reduce disruption to production. The role combines team leadership with hands-on engineering support, offering the opportunity to influence maintenance standards, develop team capability and make a positive contribution to the site's overall performance. Key Responsibilities · Organise daily workloads, establish priorities and provide technical guidance to ensure maintenance requirements are met efficiently. · Support the development of the engineering team by identifying training needs, sharing technical knowledge and helping individuals build their skills. · Manage preventative maintenance schedules, ensuring equipment is serviced appropriately and maintenance records are accurately maintained through the site's maintenance management system. · Review existing maintenance practices, identify opportunities to improve reliability and ensure essential spare parts are available when needed. · Investigate recurring equipment faults, establish root causes and coordinate corrective actions to minimise repeat failures. · Provide hands-on assistance with complex breakdowns and fault-finding, working alongside engineers to restore equipment safely and minimise production downtime. · Work closely with Production and other departments to resolve equipment issues, improve machinery performance and support operational requirements. · Assist with the introduction of new machinery, equipment upgrades and automation projects, ensuring maintenance requirements are considered. · Review maintenance and production data to identify trends, reduce unplanned downtime and improve equipment efficiency. · Encourage the team to contribute ideas and take an active role in improving working practices, maintenance standards and equipment reliability. · Ensure maintenance activities meet health and safety requirements, including site procedures, risk assessments and permit-to-work arrangements. · Promote a positive safety culture, ensuring potential hazards are reported and concerns are addressed promptly. · Keep relevant departments informed of maintenance priorities, outstanding work and equipment issues, ensuring effective coordination and communication. About You · Qualified to HNC level or equivalent in Mechanical, Electrical or Multi-skilled Engineering, or a time-served engineer with relevant industry experience. · Previous experience leading or supervising a maintenance team within a manufacturing environment. · Strong practical engineering knowledge, including fault-finding, breakdown response and preventative maintenance. · Experience using a computerised maintenance management system (CMMS), such as SAP, Pirana or similar. · Understanding of equipment reliability, root cause analysis and continuous improvement techniques. · Knowledge of health and safety requirements, including risk assessments and permit-to-work systems. · Confident leadership skills, with the ability to organise workloads, support engineers and develop team capability. · A proactive and methodical approach to problem-solving, with a focus on preventing issues rather than simply responding to them. · Strong communication skills and the ability to work effectively with production, engineering and other departments. The Opportunity This is an excellent opportunity for an experienced Maintenance Engineer or existing Maintenance Team Leader looking to take ownership of a team, improve equipment reliability and contribute to the ongoing performance of an established manufacturing operation. TPBN1_UKTJ

12 Month Contract Up to £75 per hour umbrella (Inside IR35) Mostly Remote – onsite 2 days per month in Plymouth The Senior Engineer will act as a key interface to the Design Manager and Principal Mechanical Engineer (Mechanical Services Lead), providing technical leadership, risk ownership, supplier oversight, and mentoring to engineers and designers. • Own/manage the technical baseline and requirements for assigned packages; act as Responsible Engineer and technical focal point from need identification through handover., • Check and review key deliverables: calculations, drawings, specifications, BoMs, method statements, T&IPs, installation details and as‑built records., • Lead design optioneering and LFE (lessons learned), ensuring solutions are buildable, maintainable and operable., • Provide formal checking/verification and sign‑off per project quality plans; act as Checker where authorised., • Build and own the design work plan (scope, assumptions, estimates, resources), align with schedule, and track/report progress., • Manage change control, configuration, and auditable records; maintain risk/issue/action registers., • Provide clear status reporting to the Design Manager/Project Manager and drive recovery actions where needed., • Ensure compliance with the Business Management System and Technical Manuals, applicable codes/standards and site rules., • Organise and lead package‑level Design Reviews, HAZIDs, constructability and ALARP reviews; close actions as required., • Deliver right‑first‑time outputs (coordinated, clash‑checked, specification‑compliant)., • Discharge Designer duties under CDM; lead elimination/reduction of risk through design and document residual risks., • Own safety assumptions, interlocks and protection logic (e.g., cranes/machinery), ensuring compliance with LOLER/PUWER principles, • Lead coordination with EC&I, Civils/Structural, Construction, Commissioning, Operations, Safety, Security and Supply Chain., • Direct supplier engineering: manage technical queries, submittals, factory tests, concessions and design integration; review and accept vendor drawings/data., • Mentor engineers/designers; provide task leadership, technical coaching, and quality feedback on deliverables., • Support competence assessment and contribute to resource shaping and onboarding for the package team., • Support the PM in forecasting, cost/value inputs, early warning/change notices and claims/variation reviews for technical content., • Design basis, scope definitions; requirements & interface schedules., • Calculations (loads, strength, stability, clearances, sizing, pressure/flow) and supporting reports., • GAs, details, assemblies, schematics, marking/zoning plans, interface definition., • Specifications (equipment, coatings, NDT, QA requirements), BoMs and technical bid evaluations., • Test & Inspection Plans, FAT/SAT plans and commissioning method statements., • As built redlines, asset data packs and handover files (including safety case inputs as required)., • Demonstrate experience and knowledge in the design and implementation of Mechanical Systems/Services, preferably fluid systems such as water/pipe systems, pneumatics or hydraulics., • Demonstrate understanding of how to substantiate complex requirements, preferably from the nuclear industry., • Demonstrate experience of the design support to construction, operation, refit/repair of conventional and nuclear submarines and/or facilities., • Demonstrate relevant knowledge and skills required in the technical management of complex design development throughout the design lifecycle., • Demonstrate a sound understanding of engineering design and safety practice as relevant to discipline, post and project requirements., • Demonstrate project specification, planning, project management and budgeting experience., • Lead on safety, support regulatory and nuclear processes (CDM Designer, ALARP) and HAZIDs., • Maintain rigorous configuration/document control to BMS/Technical Manuals., • Drive design delivery and quality (requirements, calculations, drawings/specs/BoMs, T&I, FAT/SAT, commissioning inputs), lead design reviews, and deliver packages in highly regulated (nuclear/defence) environments., • Demonstrate capability with CAD systems, document management systems such as BIM/CDE/Vault and MS Office; produce clear reports/presentations, lead meetings (incl. MS Teams), mentor juniors, plan/estimate/track work, and manage stakeholders/suppliers., • The candidate will have a degree or equivalent in Mechanical Engineering or related discipline., • Preferably Chartered Engineer status and member of relevant institute or significant demonstrable engineering experience and capable of registration with the Engineering Council at IEng or CEng level #J-18808-Ljbffr

Job Title: Lead Electrical Engineer Location: Plymouth - Hybrid 2+ days per week on-site Role Type: Permanent Salary: £70,000 - £80,000 depending on experience Our client, an established engineering consultancy, require an experienced Lead Electrical Engineer to join their multi-disciplined team based in Plymouth. • Please note we can only consider sole UK Nationals due to security clearance restrictions * You work collaboratively with the customer to support infrastructure and asset development at a major dockyard facility. This role may include but is not limited to: being the technical interface with the customer, ensuring that all electrical aspects of facility modifications, redesigns and new infrastructure are scoped, developed and delivered, to meet operational requirements, safety standards and compliance obligations, whilst leading a team of electrical engineers supporting various projects. Some of the main duties of the Lead Electrical Engineer will include: • Engage directly with the customer and Technical Authority to understand requirements and provide electrical engineering support., • Lead the Electrical Discipline, ensuring high quality proportional delivery of Engineering work and developing the capability on behalf of the customer., • Scope, design and propose modifications to existing assets or new facilities based on customer needs and system limitations. Engage in the full lifecycle development of electrical projects, from conceptual design through to implementation and maintenance., • Assess and approve technical documentation prior to customer submission, ensuring technical, regulatory and safety considerations have been addressed., • Liaise with multi-disciplinary teams and stakeholders to align electrical designs with broader infrastructure projects., • Support the planning and execution of installation, commissioning and testing phases as needed., • Provide technical input to project documentation, risk assessments and progress reporting., • Bachelor's degree (minimum) in Electrical Engineering or a closely related discipline. Chartered Engineer (CEng) status preferred., • Relevant electrical design engineering experience in a highly regulated industry (e.g., nuclear, maritime, infrastructure, oil and gas etc)., • Proven track record in scoping, designing and modification of electrical systems (LV/HV systems, lighting, power distribution etc.), • Strong knowledge of relevant safety regulations and electrical standards (e.g., IEEE, IEC). #J-18808-Ljbffr

Multi-Skilled Maintenance Engineer Ross-On-Wye 4on/4off - Days/Nights £50,000 - £55,000 Overview This successful business stands as a prominent and well-established player in their respective industry, delivering high quality products throughout the United Kingdom. They are currently looking for a Multi-Skilled Maintenance Engineer to join their expanding team. As a Multi-Skilled Maintenance Engineer, what you'll be doing: • Identifying failure modes of plant equipment and returning the equipment to operation safely and in a reasonable timescale., • Diagnosing and repairing equipment breakdowns., • To liaise with engineering day teams to identify and resolve long-term engineering issues., • Locating spare parts using the maintenance management system. Collecting and returning spares to stores., • Identifying failure modes of electrical equipment and making recommendations to prevent further failures., • Obtaining maintenance schedules from the maintenance management system and feeding back work carried out. Work arising to be recorded using notifications., • To carry out preventive maintenance routines., • Working collaboratively with other Multi-Skilled Maintenance Engineer's to ensure Planned Preventative Maintenance is completed in line with scheduling. What we'll need from you: • Significant experience within a Multi-Skilled Maintenance Engineer role within manufacturing., • Constant drive, enthusiasm, and self-motivation with ability to motivate others., • Ability to work under pressure., • Accurate and timely reporting skills., • Completed an apprenticeship as a Maintenance Engineer., • Working knowledge of good engineering practices., • NVQ level 3 in Mechanical OR Electrical Engineering (or equivalent City & Guilds or HNC) or equivalent. What you'll get in return: • A generous Salary of up to £55,000, • Opportunity to work in a dynamic and professional environment., • Opportunity for career growth and development., • Generous leave entitlement. Yolk Recruitment is an equal opportunities employer and embraces diversity in our workforce. We employ the best people for the job at hand and actively encourage applications from all qualified candidates, regardless of gender, age, race, religion, sexual orientation, disability, educational background, parental status, gender identity or any other protected characteristic. We champion and celebrate diversity at Yolk allowing our team to bring their whole selves to work. *Please note, whilst we do our best to contact all candidates, due to the high number of applications we receive we cannot guarantee this for every role. If you have not heard anything from us within 7 days of applying - then unfortunately you have been unsuccessful. Please keep an eye on our website for more opportunities. JBRP1_UKTJ

Location: Plymouth - Hybrid Working Sector: UK Defence / Infrastructure Position: Client-Side Programme Duration: 7-Year Programme We are working with a leading multinational consultancy overseeing a major redevelopment programme at Devonport Dockyard in Plymouth. As part of this long-term UK Defence infrastructure programme, we are seeking an experienced MEP Delivery Manager - SCADA / Controls to provide client-side leadership and technical oversight of SCADA, controls and associated electrical systems. This is an excellent opportunity for an experienced Electrical Engineer or Controls professional to play a key role in the delivery of complex, safety-critical infrastructure within a highly regulated environment. As the SCADA / Controls Delivery Manager, you will be responsible for overseeing the successful delivery of SCADA, control and monitoring systems across the programme. Working on behalf of the client, you will coordinate consultants, designers, contractors and other project stakeholders, ensuring that systems are designed, installed, integrated, commissioned and handed over in accordance with programme requirements, technical standards and applicable regulations. Key responsibilities will include: • Lead the client-side delivery and technical oversight of SCADA, controls and associated electrical systems., • Manage delivery from design development through installation, testing, commissioning and handover., • Review technical designs, specifications, drawings, contractor proposals and associated documentation., • Ensure SCADA and controls solutions meet the client's operational, technical, safety and security requirements., • Coordinate interfaces between controls systems and wider MEP, electrical, mechanical and infrastructure packages., • Oversee system integration and identify and manage technical/interface risks., • Monitor contractor performance, programme milestones, quality and technical compliance., • Support FAT, SAT, testing, commissioning and system acceptance activities., • Manage technical queries, design changes, defects and delivery issues through to resolution., • Work closely with project managers, engineering teams, contractors, operators and other key stakeholders., • Ensure appropriate technical documentation, records and assurance evidence are maintained throughout the project lifecycle., • Support successful handover into operation and ensure systems meet agreed performance requirements. You will be an experienced Electrical Engineer, Controls Engineer or MEP Delivery professional with a strong background in SCADA, industrial controls and/or automation systems. You should have experience delivering technically complex projects and be comfortable operating in a client-side role where you will provide both technical leadership and delivery oversight. Ideally, you will have: • Degree, HNC/HND or equivalent qualification in Electrical Engineering, Control Engineering, Automation or a related discipline., • Strong technical knowledge of SCADA, PLC, control, monitoring and industrial automation systems., • Experience delivering controls or electrical systems through design, construction, commissioning and handover., • Experience managing contractors, consultants and multidisciplinary engineering teams., • Strong understanding of MEP and electrical interfaces within complex infrastructure projects., • Experience with system integration, testing and commissioning., • Strong technical review, problem-solving and stakeholder-management skills., • Experience working within highly regulated, safety-critical or secure environments., • Previous Defence, nuclear, marine, utilities, industrial or major infrastructure experience would be advantageous. Due to the nature of the programme, the successful candidate will be required to meet the appropriate UK security clearance and site-access requirements. This is a rare opportunity to work client-side on one of the UK's major long-term Defence infrastructure programmes. The role offers exposure to technically challenging SCADA and controls systems within a complex engineering environment, with the stability and continuity of a seven-year programme. The position is based in Plymouth with hybrid working arrangements. #J-18808-Ljbffr

12 Month contract – Inside IR35 £71 - £80 per hour umbrella Mostly remote working – onsite circa 2 days per month In order to deliver the MoD’s submarine and warship programmes, a significant programme of infrastructure investment is required on the Devonport site. The ‘Major Infrastructure Projects’ (MIP) Business Unit has been established to support this. One of the key scope elements within MIP is establishing a defuel capability for out of service submarines, which is delivered under the programme banner of SRC upgrades. This work comprises of a number of interrelated projects to develop various multi-disciplinary infrastructure systems, with an overall value in excess of £100m. The Dock Readiness project is delivering the infrastructure upgrades for the existing dry dock that will be used for the submarine defuels. The dry dock is within a nuclear licensed site. The primary purpose of the role is to ultimately assist and support the Design and Safety Manager in the delivery of project scope. This will include the likes of the following: • Support the development, leadership, management and co-ordination of the technical work packages agreeing project related objectives, managing performance of Engineering and Design resource and making appropriate technical management decisions particularly focused on the implementation phase of work packages., • Ensure that the design documentation covers the scope of operations required by the Project Manager and is produced to agreed standards, schedule and budget., • Plan for effective project implementation, identifying key factors and supporting the leadership of the project’s technical planning process., • Ensuring effective Quality Management Arrangements, operate and deliver through compliance with the Business Management System and Technical Manual., • Ensure that the processes and activities being managed are appropriately documented with appropriate records maintained and configuration and quality controls applied., • Support the 14 Dock Readiness Design Manager to implement the project approach to Health, Safety and Environmental issues as applicable to design., • Liaise with Engineering Services Technical Authority to ensure that Relevant Good Practice is employed., • Demonstrate and promote the necessary safety culture within your area of responsibility and sphere of influence, continually assessing behaviours in your area. Where appropriate you should raise any nuclear safety concerns to the person responsible for that activity., • Ensure that staff and contractors are familiar with the hazards and risks (Health, Safety & Environment) associated with the work undertaken by the delegated engineering team through effective management and communication of the Risk Assessment., • Nuclear Introductory Course or equivalent nuclear and / or marine system knowledge., • Sound understanding and application of relevant industry legislation, • Industry Codes and Standards, • Implementation Practices, • Design Management (incl. Systems Engineering), planning and budgetary control, • Company and departmental procedures relating to Design, Health & Safety and Quality requirements, • Knowledge of facility infrastructure design and installation, • Knowledge of construction techniques employed for Nuclear Safety related structures and systems, • A degree in an appropriate engineering discipline or equivalence through experience., • Chartered Engineer, registered with Engineering Council or working towards Chartered Engineer or equivalence through experience #J-18808-Ljbffr

As a Senior Systems Engineer, you will join a team that develops and integrates nose ranging and tracking capabilities within Underwater Test and Evaluation delivering high quality systems engineering outcomes. This is an opportunity to be at the forefront of a very exciting defence challenge. Day-to-day, you’ll be delivering high-quality systems engineering outcomes supporting the UK's ranging capability under the LTPA programme. This includes system architecture definition, concepts of operations, detailed system modelling, testing integration and even delivery to the range. • Applying a systems engineering approach and delivering key engineering activities across significant projects, • Engaging with stakeholders, project managers and technical teams to meet customer and business requirements, • Leading technical teams, structuring workloads, reviewing outputs and managing junior systems engineers, • Defining and applying systems engineering processes including requirements engineering, system design and support, • Delivering technical documentation, reporting progress and escalating major technical issues where required, • Applying relevant regulatory, safety and technical standards to ensure compliance, • Sound understanding of systems engineering principles, lifecycle processes and wider engineering management considerations, • Proven experience determining suitable systems engineering approaches while considering enterprise, political and acquisition factors, • Track record of applying relevant systems engineering techniques to support effective project delivery, • Previous experience defining required engineering outputs including management plans, product descriptions and test reports, • Proven ability anticipating potential problems, understanding wider impacts and determining appropriate solutions, • Experience demonstrating strong understanding of requirements, specifications and system design alongside effective negotiation and presentation skills, • Degree level qualification or equivalent We value difference and we don't have a fixed idea when it comes to background or education, provided you can show the required level of experience and willingness to learn then we would like to hear from you. This role is 37 hours per week based at our Farnborough, Malvern, Portsmouth or Bristol site with a minimum average site attendance of three days per week. As we continue to grow into new markets around the world, there's never been a more exciting time to join QinetiQ. The formula for success is our appetite for innovation and having the courage to take on a wide variety of complex challenges. As a QinetiQ employee, you'll experience a unique working environment where teams from different backgrounds, disciplines and experiences enjoy collaborating widely and openly as we undertake this exciting and rewarding journey. Through effective teamwork, and pulling together, you'll get to experience what happens when we all share different perspectives, blend disciplines, and link technologies; constantly discovering new ways of solving complex problems in a diverse and inclusive environment where you can be authentic, feel valued and realise your full potential. Visit our website to read more about our diverse and inclusive workplace culture. • Matched contribution pension scheme, with life assurance, • Generous holiday allowance, with the option to purchase additional days, • Options to join Health Cash Plan, Private Medical Insurance and Dental Insurance, • Employee discount portal: Personal Accident Insurance, Travel Insurance, Restaurants, Cinema Tickets and much more, • We are proud to support the Armed Forces community by honouring the Armed Forces Covenant and maintaining our Gold Award standard in the Defence Employer Recognition Scheme, • Volunteering Opportunities - helping charities and local community We want to make sure that our recruitment process is as inclusive as possible and we aspire to bring out the best in our candidates by creating an environment where everyone feels valued, heard and supported. If you have a disability or health condition that may affect your performance in certain assessment types, please speak to your Recruiter about potential reasonable adjustments. Many roles in QinetiQ are subject to national security vetting being completed, applicants who already hold the appropriate level of vetting may be able to transfer it upon appointment. A number of roles are also subject to additional restrictions, which means factors such as nationality or previous nationalities may affect the roles that you can be employed in. #UKD #LI-LM1 #UKD #LI-LM1 #J-18808-Ljbffr

Product Safety Engineer - 4 roles avalable. £74.68 per hour (Inside IR35) 12 month contract Mostly remote - 2-3 days per month (Flexible) on site, LA14, possibly other sites. Our client is at the forefront of technology, innovation and national security. Bringing together talented people, cutting-edge digital capabilities and a shared purpose: to protect what matters most in an increasingly connected world. Looking for passionate, curious and forward-thinking individuals to join our team and help solve some of the most complex challenges facing our customers. Whether you're an experienced professional or looking to take the next step in your career, you'll have the opportunity to work on meaningful projects, develop your skills and make a real impact. The Principal Engineer - Product Safety shall provide support to the Engineering Delivery Manager in the development, delivery and maintenance of the Project Product Safety Management System and Product Safety Case to ensure Products are safe to own and legal to operate. Typical duties include : • Technical, • The Principal Engineer (Product Safety) shall:, • Derive and manage Product Safety requirements., • Develop, implement and maintain the Safety Management System., • Produce and manage Project Safety Management Plans., • Lead Product Safety hazard and risk identification, management and assessment activities., • Provide Product Safety engineering advice to the wider BAE Systems community., • Oversee the administration and management of the Project Hazard Log., • Influence the construction and delivery of the Project Safety Case including Safety Case reports., • Support the production of training material to support training delivery., • Deliver training to the Product Safety and Environmental domains and the wider BAE Systems community., • Lead engagement with internal and external customers, ensuring that their requirements are fully considered and adequately supported where appropriate and agreed., • Produce, present and articulate clear and logical technical safety arguments., • Complete peer reviews, checking, verification and assurance tasks to demonstrate the adequacy and robustness of the Safety Case and supporting documentation., • Oversee and peer review junior rules in the Product Safety team., • Understand the application of wider Safety Case, Quality and HSandE Management System documentation., • Support the appropriate meetings and Working Groups., • Admin, • Chair hazard identification meetings., • Support the development of realistic programme status updates, identify problem areas and implement agreed recovery plans., • Lead appropriate meetings and Working Groups JBRP1_UKTJ

Plumber – Water Efficiency Engineer £33,000 + Company Vehicle & Fuel Card - Carlisle & Surrounding Cumbria Areas Job Type: Full-time, Permanent Tired of being stuck on the same site every day? Looking for a plumbing role with steady work, a company van and the freedom to manage your own day? Sharp Talent is recruiting on behalf of Control Flow Technologies for a Plumber – Water Efficiency Engineer based in Carlisle, covering Cumbria and the surrounding areas. You'll be out on the road, meeting customers, fixing minor leaks and installing water-saving devices. It's a great opportunity to put your plumbing skills to good use in a secure, permanent role where every day brings something different. The Role You'll work independently, visiting customers at pre-booked appointments and helping households save water. Your day-to-day will include: • Installing water-saving devices in customers' homes, • Finding and fixing minor plumbing leaks, • Working safely around water meters, • Offering practical water-saving advice, • Managing appointments and van stock, • Updating completed jobs through the CRM system, • What We're Looking For, • NVQ Level 2 Plumbing qualification or equivalent, • Experience in plumbing maintenance and repairs, • Full UK driving licence, • Happy to travel throughout Cumbria, • Friendly, reliable and comfortable working in customers' homes, • EUSR Water Hygiene qualification and DBS check, or willingness to obtain both What's in It for You? • £33,000 annual salary, • Company vehicle and fuel card, • 25 days' holiday plus 8 bank holidays, • Company pension, • Overtime opportunities and performance incentives, • Pre-booked appointments – no need to find your own work, • Long-term stability and career progression opportunities About Control Flow Technologies Control Flow Technologies helps households and organisations reduce water waste through practical water efficiency solutions. Ready for a Change? If you're a qualified plumber looking for steady work, great benefits and a role that keeps you on the move, we'd love to hear from you. Apply today! JBRP1_UKTJ

At Stark, we forge the future of European and national security through cutting-edge, AI-driven technology and unmatched engineering precision. As a premier defence technology company, our mission is clear: to equip NATO Allies and their partners with next-generation autonomous defence platforms and advanced AI-driven software built to perform in the world’s most demanding environments. • The software and systems you work on directly protect personnel and defend European and national sovereignty., • You will work alongside industry-leading minds on autonomous systems, advanced propulsion, and secure cyber platforms., • We foster a fast-paced, collaborative environment where bold ideas are supported by serious R&D backing. STARK is bringing its expertise in software-defined unmanned systems to the maritime domain. Traditional fleets alone cannot safeguard this vast, critical space. Unmanned Surface Vessels (USVs) extend naval reach at lower cost and reduced risk to personnel. Our maritime family of systems is AI-enabled and built for reliable performance in the harshest seas, delivering NATO a fully integrated hardware-software capability for scalable ISR and strike operations. You will work on system-level integration for next-generation Unmanned Surface Vehicles (USV), ensuring all mechanical, electrical, and software subsystems operate as a single, mission-ready platform. As a Systems Engineer you will define architecture and interfaces, manage integration and verification activities, and drive system validation through sea trials and acceptance testing. • Serve as integration lead for Vessel payload concepts and fitouts, including customer and supplier facing representation., • Work alongside multidisciplinary teams (mechanical, electrical, control hardware, software, test) on the full lifecycle of USV design, integration, test and trials., • Conceptualise and capture system architecture for new platforms and for enhancements to existing platforms, producing technical trade studies, sizing and system performance assessments., • Systems-level design of communications pathways, distribution and redundancy tactics., • Produce layout and system design plans, define Interface Control Documents (ICDs) and enforce interface control processes for mechanical, electrical and software subsystems., • Lead Verification & Validation (V&V) and acceptance activities: author test plans and procedures for critical subsystems, schedule and run tests, and compile written test reports., • Support bench builds and hardware integration, and conduct hands-on vessel testing (VLOS/BVLOS) including travel to test ranges and customer sites as required., • Perform data analysis to maximise uptime: review test telemetry, identify trends and failure modes, and contribute to predictive maintenance / reliability improvements., • Degree (or equivalent) in Systems, Maritime, Aerospace, Electrical or a closely related Engineering discipline., • Proven industry experience with demonstrable systems engineering responsibility on complex Maritime or Autonomous systems/platforms., • Strong practical experience integrating complex systems: power systems, RF/EMC, EO sensors, networking, embedded controllers and payload interfaces., • Proven track record in applying V-Model techniques within an engineering design project., • Excellent written and verbal communication skills; highly organised and detail-oriented., • Ability to operate effectively in fast-moving, ambiguous environments and to travel within the UK/Europe for testing and integration., • A genuine passion for system development, integration and testing and a collaborative, inclusive team approach., • Either hold a UK Security clearance or be eligible to obtain UK defence clearance., • Be able to travel to the South West England area when required., • Maritime product development experience and familiarity with appropriate standards: MCT/IMO/DNV., • Background in start-up or scale-up environments where rapid prototyping, iterative testing and pragmatic engineering decisions are typical. Due to the nature of our work in the defence sector, candidates must be eligible to obtain and maintain the appropriate security clearance required for this position. Details will be provided during the recruitment process. We are an equal-opportunity employer committed to fostering a diverse and inclusive workplace. All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex, national origin, disability, or any other characteristic protected by applicable law. #J-18808-Ljbffr

ABOUT US Apogee is one of the UK's leading managed workplace services providers and part of HP Inc. We are a people-focused business that invests in career development, wellbeing and creating opportunities for our colleagues to grow. Alongside a competitive benefits package, we support professional development, community volunteering, wellbeing initiatives and employee recognition throughout the year. We are committed to creating an inclusive workplace where everyone feels valued and supported. As a Disability Confident Employer and Armed Forces Covenant Bronze Award holder, we welcome talent from all backgrounds and are passionate about helping people succeed, whether they are taking the next step in their career or returning to work after a break. JOB DETAILS As a 3rd Line Support Technician, you are a senior escalation point within Apogee's support model. You will handle the most complex incidents that cannot be resolved by 1st or 2nd line teams, while also taking ownership of infrastructure stability, technical improvements, and project delivery. You will work independently and collaboratively on infrastructure changes, new deployments, and onboarding new customers. You will also play a key role in setting standards, improving documentation, and feeding knowledge back into the wider support teams. This role suits someone who enjoys depth, responsibility, and working at enterprise scale. What you will be doing: • Acting as a final escalation point for complex technical issues, • Maintaining and improving customer IT infrastructure, including patching and upgrades, • Designing, implementing, and supporting technical solutions across server, cloud, and network environments, • Contributing to infrastructure change, system improvements, and new deployments, • Supporting client onboarding and producing high-quality technical documentation, • Providing guidance and technical direction to 1st and 2nd line teams, • Working within change control and service management processes, • Supporting customers professionally via phone, email, and self-service portals, • Participating in an on-call rota (up to one week in every four), • Continuing technical development through training and certifications A typical working pattern is Monday to Friday, 08:30 to 17:30, with a one-hour lunch break. This role also offers flexibility to work from home, typically two days per week for a five-day working week SKILLS AND EXPERIENCE REQUIRED You will be a confident 3rd Line engineer with strong Microsoft, infrastructure, and networking capability, and experience working in enterprise or public sector environments. Essential technical experience includes: • Strong hands-on experience with Microsoft 365 and Azure, • Strong experience in SCCM System Center Configuration Manager (SCCM), • Proven ability to implement and manage Microsoft Entra, Intune, Autopilot, and Defender, • Strong working knowledge of Windows Server environments (2016+), including AD, Group Policy, DNS, DHCP, and RDS, • Experience maintaining Hybrid Active Directory environments, • Experience with virtualisation platforms such as Hyper-V or VMware, • Strong understanding of networking fundamentals, including VLANs, routing, firewalls, and WiFi, • Experience working as a 3rd line escalation point within a tiered support model, • Strong awareness of IT security best practice We value candidates with AI literacy - individuals who are curious about technology, comfortable exploring automation, and eager to contribute to a modern, forward-thinking business. BASIC DBS: This post is subject to a Basic Disclosure and Barring Service (DBS) check. Under the Rehabilitation of Offenders Act 1974, applicants are only required to disclose unspent convictions. Spent convictions do not need to be declared and will not be taken into account. We are committed to fair recruitment and welcome applications from all candidates, including those with criminal records, provided any unspent convictions are disclosed and assessed appropriately. SC CLEARANCE: For this role, you will be required to obtain SC Clearance - which includes a basic criminal record check. For more information about security clearance levels and the SC vetting process, please refer to the relevant guidance available on the GOV.UK website. JBRP1_UKTJ

Babcock is recruiting a Senior Mechanical Design Engineer to deliver complex mechanical system designs for UK submarine fleet settings. You'll oversee the full engineering lifecycle from concept through to decommissioning, ensuring safety and regulatory conformity on major programmes at the Devonport Royal Dockyard site. You'll lead technical activities, provide expert guidance, conduct site visits, and coordinate engineers while maintaining a strong focus on safety and national security #J-18808-Ljbffr

Principal Software Engineer - Controls 3 Positions available £67.47 per hour (Inside IR35) 12 months 2-3 days a week on site - LA14 Join our client and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. The PMS system is one of the most important elements of the Dreadnought Class Submarine as it provides central controls and indication for vital systems on board the submarine, such as the reactor plant and secondary propulsion systems. As a Principal Engineer , you will be working within the software engineering team within our Barrow site working in the full lifecycle for safety critical software from design through implementation and unit testing. Our principal engineers are key members of the team and are responsible to the engineering manager for the delivery of packages of work, this includes the leadership/mentorship of engineering staff. You will possess excellent verbal and written communication skills, with the ability to successfully engage with a variety of stakeholders at all levels. You must also be a good problem solver who is able to use initiative to improve processes and develop effective solutions. Your main responsibilities as a Principal Software Engineer will involve: • Design of Safety CriticalPLC and SCADA application software for the Dreadnought PMS System, • Development of safety critical Software for PLC and SCADA based control systems, • Testing of Safety Critical Software modules prior to handover to the system testing team, • Configuration of software builds to support testing activities at all levels, • Configuration management, • Liaising with the engineering teams and external clients Knowledge: • Experience of software and equipment development, • Experience of working with the following PLC and SCADA products, • Siemens S7-1500 utilising TIA Portal, • WinCC OA SCADA, • Rockwell Controllogix, • GE Mark ViES PLC, • Trinity(Honeywell) iDefine modelling, • Experience of: Submarine, Marine, Nuclear, Defence, Pharmaceutical control system design and manufacture, • Interface specification test and commissioning including RS422, RS232, Analogue and Digital interfaces would be desirable JBRP1_UKTJ

Software Engineer – Visualfiles Exeter | Permanent | Full-time We're working exclusively with a highly regarded professional services business in Exeter that is looking for a Software Engineer to join its IT team. This is a hands-on development role where you'll take ownership of the organisation's LexisNexis Visualfiles platform, developing enhancements, maintaining integrations and helping shape how the system evolves to support the wider business. You'll also work across internally developed applications, Microsoft 365, Power Platform, databases and web services, giving you plenty of variety and the opportunity to contribute to wider technology and digital projects. What you'll be doing • Developing and enhancing the Visualfiles platform, • Building and maintaining system integrations, • Developing and supporting internally built applications, • Working across Microsoft 365 and Power Platform solutions, • Supporting application databases, web services and scripts, • Translating business requirements into effective technical solutions, • Working closely with stakeholders to identify opportunities for improvement, • Contributing to wider application and technology projects You'll have the opportunity to take ownership of your work from initial requirement through to delivery and see the impact of the solutions you develop across the business. What we're looking for Hands-on LexisNexis Visualfiles experience is essential. You may currently be a Visualfiles Developer, Case Management Developer, Legal Systems Developer, Applications Developer or Software Engineer. Experience across some of the following would also be beneficial: • Visualfiles Business Language (VBL), • Case management or legal systems, • SQL and databases, • APIs and system integrations, • Microsoft 365, • Microsoft Power Platform, • Web services, • Scripting and automation Alongside your technical experience, you'll be a logical problem-solver who enjoys understanding business requirements and turning them into practical solutions. You'll be comfortable working with stakeholders, taking ownership of your work and managing priorities within a collaborative IT environment. Why consider it? This is a great opportunity to join an established organisation that continues to invest in technology and innovation. You'll have genuine ownership of a business-critical platform while broadening your experience across internal applications, Microsoft technologies, integrations and wider development projects. If you have Visualfiles development experience and are within commuting distance of Exeter, we'd love to hear from you. Apply today or get in touch for a confidential conversation to find out more. JBRP1_UKTJ

As a Senior Systems Engineer, you will join a team that develops and integrates nose ranging and tracking capabilities within Underwater Test and Evaluation delivering high quality systems engineering outcomes. This is an opportunity to be at the forefront of a very exciting defence challenge. Day-to-day, you’ll be delivering high-quality systems engineering outcomes supporting the UK's ranging capability under the LTPA programme. This includes system architecture definition, concepts of operations, detailed system modelling, testing integration and even delivery to the range. • Applying a systems engineering approach and delivering key engineering activities across significant projects, • Engaging with stakeholders, project managers and technical teams to meet customer and business requirements, • Leading technical teams, structuring workloads, reviewing outputs and managing junior systems engineers, • Defining and applying systems engineering processes including requirements engineering, system design and support, • Delivering technical documentation, reporting progress and escalating major technical issues where required, • Applying relevant regulatory, safety and technical standards to ensure compliance, • Sound understanding of systems engineering principles, lifecycle processes and wider engineering management considerations, • Proven experience determining suitable systems engineering approaches while considering enterprise, political and acquisition factors, • Track record of applying relevant systems engineering techniques to support effective project delivery, • Previous experience defining required engineering outputs including management plans, product descriptions and test reports, • Proven ability anticipating potential problems, understanding wider impacts and determining appropriate solutions, • Experience demonstrating strong understanding of requirements, specifications and system design alongside effective negotiation and presentation skills, • Degree level qualification or equivalent We value difference and we don't have a fixed idea when it comes to background or education, provided you can show the required level of experience and willingness to learn then we would like to hear from you. This role is 37 hours per week based at our Farnborough, Malvern, Portsmouth or Bristol site with a minimum average site attendance of three days per week. As we continue to grow into new markets around the world, there's never been a more exciting time to join QinetiQ. The formula for success is our appetite for innovation and having the courage to take on a wide variety of complex challenges. As a QinetiQ employee, you'll experience a unique working environment where teams from different backgrounds, disciplines and experiences enjoy collaborating widely and openly as we undertake this exciting and rewarding journey. Through effective teamwork, and pulling together, you'll get to experience what happens when we all share different perspectives, blend disciplines, and link technologies; constantly discovering new ways of solving complex problems in a diverse and inclusive environment where you can be authentic, feel valued and realise your full potential. Visit our website to read more about our diverse and inclusive workplace culture. • Matched contribution pension scheme, with life assurance, • Generous holiday allowance, with the option to purchase additional days, • Options to join Health Cash Plan, Private Medical Insurance and Dental Insurance, • Employee discount portal: Personal Accident Insurance, Travel Insurance, Restaurants, Cinema Tickets and much more, • We are proud to support the Armed Forces community by honouring the Armed Forces Covenant and maintaining our Gold Award standard in the Defence Employer Recognition Scheme, • Volunteering Opportunities - helping charities and local community We want to make sure that our recruitment process is as inclusive as possible and we aspire to bring out the best in our candidates by creating an environment where everyone feels valued, heard and supported. If you have a disability or health condition that may affect your performance in certain assessment types, please speak to your Recruiter about potential reasonable adjustments. Many roles in QinetiQ are subject to national security vetting being completed, applicants who already hold the appropriate level of vetting may be able to transfer it upon appointment. A number of roles are also subject to additional restrictions, which means factors such as nationality or previous nationalities may affect the roles that you can be employed in. #UKD #LI-LM1 #UKD #LI-LM1 #J-18808-Ljbffr

Field Service Engineer ASRS Location: Northern Ireland Salary: £38,000 – £40,000 + Overtime Hours: Monday to Friday, 8:00am – 5:00pm We're working with a well-established specialist engineering business that supplies, installs and maintains Automated Storage and Retrieval Systems (ASRS) for customers across a wide range of industries. Due to continued growth, they are looking to add a Field Service Engineer to their team, covering customers throughout the region with occasional wider UK travel. This is a great opportunity for an experienced Mechanical or Electrical Engineer who enjoys fault-finding, working independently and dealing directly with customers. The Role As a Field Service Engineer, you'll be responsible for the servicing, maintenance, fault-finding and repair of sophisticated automated storage systems at customer sites. Your responsibilities will include: • Carrying out inspections and preventative maintenance on automated storage systems, • Completing annual servicing and routine maintenance, • Diagnosing and resolving mechanical and electrical faults, • Responding to breakdowns and providing effective technical support, • Supporting system upgrades and software updates, • Assisting with the installation and commissioning of new equipment, • Providing customers with technical support and product guidance, • Completing service reports and documentation accurately, • Managing your own diary, travel and workload, • Building strong relationships with customers and representing the business professionally, • Developing specialist knowledge of ASRS equipment and technology About You We're interested in speaking with Engineers from a range of backgrounds, particularly multi-skilled, with strong electrical and mechanical capabilities. You should be: • Hands-on and technically minded, • Confident with fault-finding and problem-solving, • Comfortable working independently at customer sites, • Customer-focused with good communication skills, • Organised and able to manage your own workload, • Proactive and willing to learn specialist equipment, • Professional and presentable, • Able to travel throughout the region, • A full UK driving licence holder Experience with automated storage, materials handling, industrial machinery, automation or similar equipment would be advantageous, but is not essential. What matters most is having the right engineering fundamentals, a practical approach and the willingness to learn. What You'll Get • £38,000 – £40,000 basic salary, • Overtime opportunities, • Monday to Friday, 8:00am – 5:00pm, • 25 days holiday + bank holidays, • Company van, with the option for personal use, • Company laptop, • Company mobile phone, • Full tools and equipment, • Comprehensive specialist product training, • Training opportunities in the UK and Germany, • Pension, • Life assurance, • Income protection, • Annual discretionary bonus, • Paid sick leave Work-Life Balance Despite being a field-based position, this role offers an excellent work-life balance. Overnight stays are very rare, and weekend work is also very rare, with the normal working pattern being Monday to Friday, 8am – 5pm. There may occasionally be additional travel, weekend work or overnight stays to meet customer requirements, but these are the exception rather than the norm. Interested? If you are interested in this opportunity, please contact Alex Connolly on 01254 781300. SER-IN JBRP1_UKTJ

Collins Aerospace isn’t just about finding a job; it’s about embarking on a journey to redefine the future of aerospace technology. Collins Aerospace, an RTX business, is a leader in technologically advanced and intelligent solutions for the global aerospace and defence industry. With extensive capabilities, a comprehensive portfolio and broad expertise, we solve some of our customers’ toughest challenges and help meet the demands of a rapidly evolving global market. We are currently seeking a Senior Electronics Systems Engineer to join our team in Plymouth or Bristol, UK (Hybrid). Collins Aerospace was selected as a UK supplier with a demonstrated capability to develop and manufacture navigation-grade Inertial Measurement Units (IMUs) for use in future complex weapons systems as part of the UK’s Weapons Sector Research Framework (WSRF). Our IMUs combine proprietary MEMS sensors, ASICs, FPGAs, embedded software and unique architectures, housed within bespoke mechanical fixtures designed to withstand extreme environmental conditions. This is an opportunity to join a highly skilled electronics team working on the design and development of high-performance, world-class IMUs and MEMS sensor technologies. As a Senior Electronics Systems Engineer, you will apply your expertise in mixed-signal electronic design and system-level integration to support the development of complex, high-performance products. • Design, develop and test analogue, digital and mixed-signal electronics across the full product lifecycle for new and legacy products and test equipment., • Support hardware integration testing, troubleshooting and problem solving., • Use E-CAD tools for schematic capture, PCB layout and circuit/PCB simulation., • Work closely with Systems, Software, Mechanical and other engineering disciplines to deliver integrated solutions., • A minimum 2:1 Bachelor’s degree in Electronics Engineering or a closely related discipline., • A strong theoretical understanding of analogue electronics., • Experience integrating sensitive analogue circuitry with high-speed digital devices such as FPGAs, DSPs and microprocessors., • Experience designing precision circuitry, including op-amps, DACs, ADCs and voltage references., • An understanding of control theory and open and closed-loop systems., • Experience using E-CAD systems for schematic capture, PCB layout and circuit/PCB simulation., • We would also be interested in experience in one or more of the following areas: Xpedition, HyperLynx, LTSpice/AMS or similar tools., • VHDL/Verilog architectural design, coding and simulation, particularly with Xilinx or Microchip technologies, including SoC., • Embedded C/C++ for integration and problem solving., • MEMS sensor technology., • Competitive salary and benefits package., • Flexible working options., • Excellent 2:1 matched pension contribution (up to 10%)., • Private health insurance and life assurance., • 25 days annual leave plus the ability to buy or sell up to 5 more., • Early finish on Fridays., • Career development, mentorship, and world-class training opportunities., • And much more! Note: The successful candidate must hold an active or be willing and eligible to obtain SC level security clearance. Project access restrictions may also apply to some nationalities. Hybrid: Employees who are working in Hybrid roles will work regularly both onsite and offsite. Ratio of time working onsite will be determined in partnership with your leader. RTX adheres to the principles of equal employment. All qualified applications will be given careful consideration without regard to ethnicity, color, religion, gender, sexual orientation or identity, national origin, age, disability, protected veteran status or any other characteristic protected by law. RTX is an aerospace and defense company that provides advanced systems and services for commercial, military and government customers worldwide. It comprises three industry-leading businesses – Collins Aerospace, Pratt & Whitney, and Raytheon. Its 195,000 employees enable the company to operate at the edge of known science as they imagine and deliver solutions that push the boundaries in quantum physics, electric propulsion, directed energy, hypersonics, avionics and cybersecurity. The company, formed in 2020 through the combination of Raytheon Company and the United Technologies Corporation aerospace businesses, is headquartered in Arlington, Virginia. #J-18808-Ljbffr

Principle Cloud Engineer • Salary to £65k (neg.), • Role can be fully remote, with paid travel to client site (most likely in London) as required. This company is a Workflow & AI Orchestration Specialist. They're on a mission to modernise how public sector organisations manage casework, derive insight from data and deliver citizen services. They operate across two pillars: Advise and Implement to provide end to end technology solutions that integrate cutting edge orchestration and agentic AI capabilities. They're growing fast and looking for bright, dynamic people to help build their business. NB: to be eligible for this role you must ALREADY hold UK security clearance (SC, DV, eDV) Role Overview They're looking for an AWS savvy Principal Cloud Engineer to join their growing platform and delivery teams. You'll help design, build, and operate reliable, secure, and performant infrastructure that underpins critical public-sector services. You'll combine your background in AWS, DevOps, cloud engineering, and automation with a focus on reliability, observability, and scalability. You'll also work with event driven technologies, identity and access management, and data platforms, ensuring their orchestration solutions are resilient, secure, and future-ready. This is an exciting opportunity for an engineer who thrives on solving complex infrastructure and automation challenges, automating everything, and shaping secure-by-design delivery environments. Key Responsibilities Design, build, and operate resilient cloud infrastructure (AWS essential) Develop and maintain CI/CD pipelines using tools such as GitHub Actions, Jenkins, or GitLab CI Implement infrastructure-as-code using Terraform, Helm, and Kubernetes manifests Build and manage event-driven architectures using Apache Kafka or similar messaging systems Operate and maintain databases and data platforms such as PostgreSQL, Elasticsearch, and MongoDB Configure and support identity and access management (IdAM) solutions such as Keycloak Monitor system health, performance, and capacity using modern observability stacks (Prometheus, Grafana, ELK, OpenTelemetry) Champion DevSecOps practices, embedding security and compliance into every stage of delivery Automate deployment, scaling, and recovery processes to improve reliability and reduce manual toil Support development teams with environment configuration, secrets management, and container orchestration Participate in incident management and root-cause analysis to continuously improve system resilience Contribute to internal platform frameworks, templates, and automation accelerators Essential Experience in SRE, DevOps, or Cloud Infrastructure Engineering roles Strong knowledge of AWS Azure, or GCP environments Hands-on experience with Kubernetes, Docker, and container orchestration Proven experience building and maintaining CI/CD pipelines Strong experience with infrastructure-as-code (Terraform, Helm, or CloudFormation) Working knowledge of event-driven systems (Kafka, RabbitMQ, or similar) Experience managing and tuning databases (PostgreSQL, Elasticsearch, MongoDB) Familiarity with Keycloak or equivalent identity and access management (IdAM) platforms Strong scripting or automation experience (Python, Bash, or Go preferred) Experience with monitoring, logging, and alerting tools for observability Understanding of networking, DNS, load balancing, and security controls Desirable Experience operating production workloads in the UK public sector or regulated environments Familiarity with Camunda or other process orchestration platforms Experience implementing DevSecOps frameworks or security automation tools Understanding of zero-trust networking and secure-by-design principles Familiarity with service mesh technologies (e.g. Istio, Linkerd) Exposure to agentic AI or workflow automation environments NB: to be eligible for this role you must ALREADY hold UK security clearance (SC, DV, eDV) Profile 29 recruitment keywords: cloud engineer engineering AWS Azure Google Cloud Platform SC security cleared clearance remote hybrid London jobs SRE site reliability Devops AI government public sector workflow Camunda JBRP1_UKTJ

Job Title: IT Maintenance Engineer Location: Plymouth office and field based, supporting partner locations as required Salary: £32,000 to £35,000 per annum (depending on experience) Job Type: Full-time, Permanent Working Hours: 8.5 hours per day, 40 hours per week within our opening hours of 8am - 6pm with a 30-minute lunch. Monday to Friday with additional On Call and Overtime support available Who are we: Flotek Group is one of the fastest-growing Tech Companies in the UK, providing IT, Cybersecurity and Comms technology to small & medium businesses. With sales and support locations across the country, our ambitious growth is driven by our core values and fundamental principles. We deliver every product and service with expertise, passion, and heart. When you join Flotek Group you join our 'Purple Army' and become part of a team driven by a set of values that guide our every interaction, both with each other and with our partners. We enjoy a collaborative, fast-paced working environment, where we can expect to learn to be exceptional, earn trust through actions and receive recognition when our work gets a 'Wow!' About the Role: The IT Maintenance Engineer is a hybrid field-based and remote support role based from the Plymouth office, responsible for maintaining, supporting and improving partner technology environments. The role combines proactive maintenance, infrastructure support, end-user support and basic communications engineering. Travel across the south-west of England is required, with a company van provided for business use. Key Responsibilities: • Undertake scheduled maintenance visits to partner sites as required., • Provide remote IT and communications support via phone, email and remote tools., • Perform infrastructure health checks and preventative maintenance activities., • Support Microsoft 365, Windows, networking and end-user technologies., • Assist with VoIP, internet connectivity and telephony troubleshooting., • Maintain accurate documentation and ticket updates within HaloPSA., • Support project delivery, installations and technology refresh programs., • Act as Flotek's on-site technical representative and trusted advisor. Travel Requirements: • Regular travel to partner locations as required, primarily from the Plymouth office base, using a company-provided van., • Full driving license required., • Company van provided for business travel., • The van is to be used in line with Flotek company vehicle policies., • Occasional overnight stays may be required. About you: Essential Skills & Experience: • 3+ years in MSP, Infrastructure, IT Support or Field Engineering., • Strong Microsoft 365 administration and troubleshooting skills., • Windows desktop and server support experience., • Knowledge of Active Directory and Microsoft Entra ID., • Networking fundamentals including switching, wireless, VLANs and firewalls., • Excellent communications and documentation skills. Desirable Skills: • VoIP and hosted telephony experience., • Experience with Gamma, CallSwicth, and Teams Voice or similar platforms., • Ticketing system experience., • Cyber security awareness and best-practice knowledge. Benefits: • Birthday day off., • Additional day off for personal life milestones., • 'Give Back Day' for supporting a charity of your choice., • Perkbox discounts., • Company van provided for business use., • Regular social events and team-building opportunities., • Career growth pathways into senior communications or network engineering. Due to the nature of the role the company will not be able to offer sponsorship or relocation assistance so candidates must already reside in the UK. Please click the APPLY button to submit your CV for this role. Candidates with the experience or relevant job titles of; IT Field Engineer, Field Engineer, Network Support Engineer, 2nd Line Engineer, ICT Support Engineer, IT Engineer, Technical Support Engineer, may also be considered for this role. JBRP1_UKTJ

The position of Production Toolmaker/PROGRAMMER Engineer is a specialist role and will be to be responsible for setting up, running and controlling the processes and assist employees in resolving process problems, as instructed by the Cell Leader, to meet Cell targets on cost, quality and timeliness. Any additional information you require for this job can be found in the below text Make sure to read thoroughly, then apply. You will be responsible for allotted time away from setting duties to create & modify CNC programs offline, design work holding, specify and order tooling. If you are an experienced Toolmaker/Programmer who is ready to take their next step within their career, we want to hear from you. Salary DOE. Main Duties: • To set up, operate and control processes in the sequence as instructed by the Leader. To perform this, the employee will:, • Draw from the relevant storage area all materials, equipment, tooling and documentation required to set up the process., • Set up the process in accordance with relevant instructions, i.e. Route Card, P.S.P.I., I.S.P.I., Working Practice., • Consult with the Team Leader if it is not possible to achieve process to the relevant instructions., • Carry out all necessary checks and record on the relevant documentation all checks that have been carried out., • Run the process or instruct the relevant employees to run the process., • To offline modify programs for changes including material size amendments and tooling changes., • To write offline new programs for established product styles., • To identify tooling requirements, for new programs, design tooling as required working in conjunction with manufacturing and design engineers., • Order external tooling as required, holder’s tips etc., • To account for all materials and product being worked on the process the Setter has been designated to control, for all shifts worked., • To maintain accurate, legible records using the appropriate recording systems., • To work correctly to the Company direct and indirect time reporting system, reporting any problems encountered to the Team leader., • To communicate with the Team leader on all problems affecting the process being controlled or the overall performance of the Cell., • To communicate with other employees in the Cell, services to the Cell and other Cell leaders on process capability problems as instructed by the Cell Leader., • To carry out related duties as required. Skills & Experience: • Apprentice trained, time serviced Toolmaker/Programmer, • A good level of computer literacy., • The ability to read and understand engineering drawings., • An extensive knowledge of and a proven background in CNC programming, additional training for specific machines will be provided as required., • Experienced in appropriate selection of speeds and feeds., • Understanding of holder, tip & cutter selection., • Understanding of work holding design and requirements. xrnqpay, • Understanding of program optimisation., • To have a full understanding of all machinery, equipment, gauging, and processes performed in the Cell

The Ferrovial BAM Joint Venture has a successful history of delivering critical infrastructure for the UK on time and to budget together in joint venture partnership. They first worked together in 2010 as BFK, delivering three Crossrail contracts, including the longest stretch of tunnelling works between Royal Oak and Farringdon Station, the first central station to be completed on the Elizabeth Line. The team is also delivering the Silvertown Tunnel project together in East London and has been delivering excellence at each stage of HS2, such as Fusion JV for the Enabling Works packages, EKFB for the central Main Works Contract and now delivering the track infrastructure across the entire HS2 route. We are now recruiting for a Rail Systems Lead Design Manager to join the HS2 Track infrastructure project at the initial design phase which will run concurrently with the completion of main works contracts, which are now at their peak. The team operate under a collaborative Rail Systems Alliance structure, designed to manage interfaces and resolve any program conflicts. The members will work together on design, access, resources, and logistics to achieve shared goals for cost and schedule. Your team • This role can be based out of the project offices at London, Euston or Birmingham, Snow Hill, • You should live within a reasonable commuting distance of the stated work location. If not, please include a cover note outlining your relocation plansMaking Possible As Rail Systems Lead Design Manager, you will be responsible for the following: Systems Integration & Design management • Coordinate technical interfaces between Track systems, Main Works Contractors, Design Partners and Alliance members, • Support integration of multidisciplinary design deliverables across the Rail Systems programme., • Facilitate resolution of engineering, programme and design interface issues., • Support engineering governance and design assurance activities across the Alliance. Design Management and Spatial Coordination • Lead and manage the spatial coordination of rail systems designs produced by design partners, Rail System Alliance members and third parties., • Establish, contribute and maintain robust design coordination processes as required, • Manage resolution of design clashes, interface issues, and spatial conflicts to support efficient project delivery, • Chair and facilitate design coordination meetings, workshops, and reviews with relevant stakeholders., • Monitor and report design progress and ensure coordinated delivery in accordance with Client requirements, standards, and milestones. Technical Assurance • Coordinate technical assurance activities related to spatial coordination and integrated design delivery., • Ensure designs are reviewed, verified, and validated in accordance with project governance requirements and applicable standards., • Monitor design compliance with Client requirements Health and Safety in Design • Coordinate and promote Health and Safety in Design principles across all rail systems disciplines., • Coordinate CDM processes and production of safety-related deliverables, • Ensure hazards are identified, assessed, eliminated, or reduced through the design process wherever reasonably practicable., • Facilitate design risk reviews and ensure risks are appropriately recorded, managed, and communicated., • Support compliance with relevant health and safety legislation and client requirements., • Support Client with Principal Designer duties System Safety Coordination • Coordinate system safety activities across multidisciplinary design teams., • Ensure safety requirements are integrated into the design development process and appropriately managed through the project lifecycle., • Support hazard identification, safety analyses, safety assurance activities, and safety approvals., • Collaborate with safety specialists and stakeholders to ensure system safety requirements are achieved.What do you bring to the role?, • Extensive experience in rail systems design, integration, and multidisciplinary coordination., • Experience working within contractor-led, design and build or alliance delivery environments is preferred, • Experience working within large-scale rail infrastructure programmes., • Experience managing external design organisations and consultant teams, • Strong understanding of design management processes within major rail or infrastructure projects., • Experience managing design interfaces and spatial coordination in complex environments., • Knowledge of technical assurance, systems engineering, and safety assurance principles., • Understanding of Health and Safety in Design requirements and industry best practice., • Excellent stakeholder management, communication, and facilitation skills., • Ability to lead multidisciplinary teams and manage complex technical issues., • Previous experience in a similar role with aligned responsibilities & accountabilities., • Strong communication, leadership and management skills, with a positive and collaborative approach., • Enthusiastic team player, able to listen, understand, engage and motivate, and with confidence to make decisions when required., • Degree in Civil or Mechanical Engineering (or related field), • Chartered Engineer (CEng) or working towards chartership, • Membership of ICE, IMechE, IET or equivalent professional institution, • The ability to communicate complex safety information clearly and concisely to both technical and non-technical audiences, • The ability to work effectively with cross-functional teams and manage stakeholder expectations., • Experience in a safety engineering role, preferably within the rail industry., • Good understanding of CDM processes and its duty holders, • Provide technical leadership and guidance on design coordination matters.What's in it for you?, • Competitive salary, • A wide range of family-friendly policies, • Company car/car allowance/travel allowance, • 8 % matched pension contributions, • Private healthcare, • Life assurance, • 26 days holiday, • 2 wellbeing days, • 1 volunteering day, • Personal and professional developmentAbout BAM Building a sustainable tomorrow. That's our mission and our promise at BAM. It's how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe. We strive to create an environment where everybody feels welcome and valued. We're on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics. JBRP1_UKTJ

Department: Manufacturing Employment Type: Full Time Location: Plymouth Plessey is looking for a Data & Performance Engineer to turn manufacturing and business data into trusted information and clear dashboards that drive faster, better decisions. Reporting to the Operational Excellence & Industrial Engineering team, leading continuous improvement across the business. Working with IT, who own the business's databases, you will turn system data into meaningful information through validation, data modelling, analytics, reporting and automation, with a focus on improving cycle time, cost, quality and productivity • Build and maintain dashboards and reports for manufacturing performance, including cycle time, OEE, yield, WIP, capacity and quality., • Build data models that turn data from manufacturing and business systems, such as MES, FDC, SPC, ERP, scheduling and equipment data, into meaningful information, using databases provided and managed by IT., • Validate data used in reporting, agree KPI definitions, and raise and follow up data issues with IT and system owners., • Build dashboards for the enterprise KPI framework, showing actual against target for every function., • Automate management reporting, including monthly business reviews and strategy deployment (Hoshin Kanri) dashboards., • Maintain reporting standards and KPI definitions, and support IT with data governance., • Own and develop equipment and process monitoring systems, such as FDC, so engineers get useful alerts and insight., • Apply statistical analysis and predictive analytics to find the causes of losses and variation., • Identify and deliver automation of manual reporting and routine workflows., • Provide data to support capacity and simulation models used for planning and investment decisions., • Measure the financial and operational benefits of improvement projects for Finance sign-off., • Lead data analysis in improvement projects and performance reviews, and coach cross-functional teams to use data effectively. Degree in engineering, science, data, computing or a related subject, or equivalent industry experience. Advanced, hands-on experience with BI tools such as Power BI: data modelling, DAX measures, dashboard design and publishing, and managing refresh, security and workspaces. Advanced Power Query (M): connecting to and combining multiple sources, and cleaning and transforming large datasets. Able to turn data into clear messages for engineers and senior managers. Experience with generative AI tools and agents. Data engineering experience (pipelines, data warehouses or cloud platforms). Advantage Knowledge of statistical process control and design of experiments. Proven experience analysing data in a manufacturing or high-tech environment. Advanced SQL: complex queries (joins, CTEs, window functions), views and stored procedures, and query performance tuning on large database. Experience with manufacturing systems data, for example MES, FDC, SPC or ERP. Experience in semiconductor, electronics or other high-tech manufacturing. Experience with Microsoft Fabric (lakehouse, dataflows, pipelines). • Pension scheme, • Private medical & dental insurance, • 28 days' holiday + bank holidays, • Free onsite meals, • Onsite gym, • Relocation support, • Visa support available #J-18808-Ljbffr

Job Title: Lead Electrical Engineer Location: Plymouth - Hybrid 2+ days per week on-site Role Type: Permanent Salary: £70,000 - £80,000 depending on experience Our client, an established engineering consultancy, require an experienced Lead Electrical Engineer to join their multi-disciplined team based in Plymouth. Please note we can only consider sole UK due to security clearance restrictions. You work collaboratively with the customer to support infrastructure and asset development at a major dockyard facility. This role may include but is not limited to: being the technical interface with the customer, ensuring that all electrical aspects of facility modifications, redesigns and new infrastructure are scoped, developed and delivered, to meet operational requirements, safety standards and compliance obligations, whilst leading a team of electrical engineers supporting various projects. • Engage directly with the customer and Technical Authority to understand requirements and provide electrical engineering support., • Lead the Electrical Discipline, ensuring high quality proportional delivery of Engineering work and developing the capability on behalf of the customer., • Scope, design and propose modifications to existing assets or new facilities based on customer needs and system limitations., • Engage in the full lifecycle development of electrical projects, from conceptual design through to implementation and maintenance., • Assess and approve technical documentation prior to customer submission, ensuring technical, regulatory and safety considerations have been addressed., • Liaise with multi-disciplinary teams and stakeholders to align electrical designs with broader infrastructure projects., • Support the planning and execution of installation, commissioning and testing phases as needed., • Provide technical input to project documentation, risk assessments and progress reporting., • Bachelor's degree (minimum) in Electrical Engineering or a closely related discipline., • Chartered Engineer (CEng) status., • Relevant electrical design engineering experience in a highly regulated industry (e.g., nuclear, maritime, infrastructure, oil and gas etc)., • Proven track record in scoping, designing and modification of electrical systems (LV/HV systems, lighting, power distribution etc.)., • Strong knowledge of relevant safety regulations and electrical standards (e.g., IEEE, IEC). This really is a fantastic opportunity for a Lead Electrical Engineer to progress their career. #J-18808-Ljbffr

At Babcock we're working to create a safe and secure world, together, and if you join us, you can play your part as a Senior Mechanical Design Engineer at our Devonport Royal Dockyard site., As a Senior Mechanical Design Engineer, you'll play a pivotal role in delivering complex mechanical system designs that directly support the United Kingdom's submarine fleet. From fluid systems and industrial gases to large-scale pipework infrastructure, your work will contribute to critical defence programmes with a clear, visible impact. Day-to-day, you'll have the unique opportunity to be involved in the full engineering lifecycle-from concept design through to implementation, maintenance, and eventual decommissioning. You'll lead technical activities, provide expert engineering guidance, and ensure compliance with rigorous safety and regulatory standards in a highly regulated environment. Working on major programmes across Devonport, you'll see your designs come to life on-site while developing your career across diverse, technically challenging projects. • Leading the development and delivery of mechanical designs across the full project lifecycle, • Providing expert advice on mechanical systems, compliance, and engineering standards, • Conducting site visits, surveys and supporting through-life system performance, • Managing and supporting engineers, coordinating work and driving technical progress, • Producing and reviewing design, safety and substantiation documentation. This role is full time, 35 hours per week and provides hybrid working arrangements with a minimum of 2 days in the office/onsite., • Level 6 qualification in a mechanical engineering discipline, or Level 5 with significant relevant experience (essential), • Professionally registered with a recognised engineering institution such as the Institution of Mechanical Engineers or Institution of Engineering and Technology - Desirable Security Clearance The successful candidate must be a sole UK National who is able to achieve and maintain Security Check (SC) security clearance for this role. We're Babcock - a global FTSE 100 organisation with over 26,000 people working together to make a difference. Here, you'll be part of something bigger. From initial design to final decommissioning, your work will contribute to products and services that are essential to national security and public infrastructure. Together, we're building a future that lasts - not just through the impact we make, but through meaningful careers that respect your work-life balance. We call that lifetime engineering. Join us and see how far we can go, together. Many of the positions within our company are subject to national security clearance and Trade Control restrictions. This means that your eligibility for certain roles may be affected by your place of birth, nationality, current or former citizenship, and any residency you hold or have held. Further details are available at . • Generous holiday allowance, • Matched contribution pension scheme, with life assurance, • Access to a Digital GP, annual health check, and nutritional consultations through Aviva DigiCare+, • Employee share scheme, • Employee shopping savings portal, • Payment of Professional Fees, • Reservists in the armed forces receive 10-days special paid leave, • Holiday Trading is a benefit that allows UK Babcock employees to buy additional leave or to sell up to one working week of annual leave from their annual entitlement. There is an annual Window to request this benefit. 'Be Kind Day' enables employees to take one working day's paid leave a year (or equivalent hours) to undertake volunteering work with their chosen organisation or registered charity, • Excellent development opportunities and benefits package including an employee assistance programme supporting physical, mental and financial wellbeing. #J-18808-Ljbffr

IT Support Engineer needed for a group of schools in Cambridge, providing technical support for hardware, software, and networks to staff and students. Role involves 1st line support and system maintenance.

The ideal candidate holds a degree in Electrical/Power Systems Engineering and has at least 5 years of relevant experience with PSCAD. A recruitment consultancy is seeking a Consultant to support electrical engineering projects. This contract role is based in London, England, offering a chance to co

The role combines electrical engineering principles with strong systems integration and software skills. Degree in Electrical / Power Systems Engineering (or related field). Power Systems Automation (PSA) Engineer.

This opportunity will suit experienced Systems Engineers with a strong background in requirements management, verification & validation, and safety-critical systems. Experience across the systems engineering lifecycle. Systems architecture and design support.

System1 is seeking a Backend Software Engineer to shape our AI platform by building Python backend services and RESTful APIs.

Principle System Engineer with extensive FPGA (ideally using VHDL) and firmware design and development is sought on a hybrid basis by a multi award winning international engineering firm based near Gloucester. With over 15 years of R&D and innovation in their field this Principle System engineer wil

Experience with Systems Engineering, System Architecture, RF Systems, Datalinks, Verification, Requirements Capture, Secure Communications. With continued demand and innovation across their product range, they are hiring a Senior Systems Engineer to lead technical delivery on new and existing missio