System engineer jobs in CoventryCreate job alerts

Do you thrive behind the wheel and take pride in delivering top-notch service? We’re looking for experienced Class 2 Drivers to bring B&Q products to life at our customers’ doorsteps. Ready to hit the road with a company that puts people first? Keep reading! \n \n Here at GXO, we’re working together with B&Q and are looking for highly experienced Class 2 Driver to join our Store to Home team in Coventry (CV3 2JD). \n \n You’ll be working on a full-time, permanent basis, following a two-week rotating shift pattern: Week 1 – Monday to Friday / Week 2 – Tuesday to Saturday, with a start time at 07:00. The role is contracted to 40 hours per week. \n \n Pay, benefits and more: \n \n As a Class 2 Driver, you’ll receive: \n \n\n • An hourly rate of £15.79,that is an annual salary of £32,843.20\n, • Overtime pay of £23.69 per hour (when applicable, paid over 40hrs)\n, • On-going annual CPC training\n, • Holiday pay and Workplace pension\n, • B&Q store discount upon successful completion of probation period\n, • A 24/7 online GP service, life assurance and a fully comprehensive employee assistance programme\n, • Access to our MyBenefits platform offering a variety of high street discounts, cashback cards, a saving scheme and much more!\n, • Access to GXO University – home to a wealth of online training courses, meaning your development never ends!\n\n \n What you’ll do on a typical day: \n \n\n • Delivering products to customer premises (room of choice) on multidrop basis – an average of 16 drops per day off peak and 24 drop per day in peak season\n, • Maintain accurate driving/working time records using the Tachomaster system and manual entries to record all working hours as required by the WTD regulations\n, • Operate company vehicles in a safe, legal, and efficient manner\n, • Ensure all products are checked off the vehicle and the customer receive the correct products and delivery documentation\n, • Keep customers informed of their estimated time of delivery and where issues occur communicate with in a polite and courteous manner\n\n \n What you need to succeed at GXO: \n \n\n • Previous experience in multidrop, store deliveries preferable but not essential\n, • A full UK driving licence with category C Entitlement\n, • No more than 6 penalty points on your licence (no DD, DR, DG, BA, CD, AC, LC or TT endorsements)\n, • An up to date CPC and Digital Tachograph\n, • Excellent customer service skills, both written and verbal\n, • Willingness to undertake pre-employment Disclosure and Barring Service (DBS Check)\n, • Be prepared to commute to Coventry (CV3 2JD) for the required shift pattern\n\n #bqstore \n We engineer faster, smarter, leaner supply chains. \n GXO is a leading provider of cutting-edge supply chain solutions to the most successful companies in the world. We help our customers manage their goods most efficiently using our technology and services. Our greatest strength is our global team – energetic, innovative people of all experience levels and talents who make GXO a great place to work. GXO is an equal opportunity employer. We celebrate, support and thrive on diversity and are committed to creating an inclusive environment for all employees. We believe that diversity and inclusion in our business is critical to our success as a global company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool. We are an Armed Forces friendly organisation and Disability Confident Leader as part of the Disability Confident Scheme (GIS) and actively welcome applications from people with disabilities. \n \n The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All employees may be required to perform duties outside of their normal responsibilities from time to time, as needed. Review GXO's candidate privacy statement

Principal Vehicle Systems Engineer - Protected Mobility / Defence \n Salary: £55,000 - £65,000 FTC Contract: £375 - £425 per day, Outside IR35 Security: Must be eligible for UK SC Clearance \n We are looking for an experienced Principal Vehicle Systems Engineer to provide technical leadership across complex Protected Mobility and defence engineering programmes. \n Working across the full engineering lifecycle, you will lead systems engineering activities from requirements and concept development through design, integration, testing and production. \n Key Responsibilities \n\n • Provide technical and systems engineering leadership across vehicle programmes\n, • Develop and manage system and subsystem requirements\n, • Support system architecture, specifications and design solutions\n, • Work closely with engineering teams, customers, suppliers and subcontractors\n, • Lead technical activities through design, integration, test and acceptance\n, • Support design reviews and resolve complex engineering issues\n, • Produce high-quality technical documentation and brief senior stakeholders\n\n What We're Looking For \n\n • Engineering degree or equivalent relevant qualification\n, • Strong systems engineering experience\n, • Experience leading complex engineering development programmes\n, • Requirements management experience, including DOORS\n, • System design and analysis experience using SysML\n, • Experience across the full systems engineering lifecycle\n, • Strong supplier/subcontractor management skills\n, • Excellent communication, influencing and customer-facing skills\n, • Willingness to travel within the UK and potentially overseas\n, • Eligible to obtain UK Security Clearance (SC)\n\n Experience within defence, protected mobility, military vehicles or automotive engineering would be highly advantageous. \n \n Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. \n In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.

Contract Quality Engineer \n Automotive, Transportation, Off-Highway, Marine \n Competitive Rates Outside IR35 \n Step into a role that genuinely shapes product quality at pace. As a Quality Engineer, you'll help drive supplier excellence, tackle real-world quality challenges, and support the launch of an ambitious diesel outboard system project set for 2026. This Quality Engineer position offers meaningful cross-functional influence, strong process ownership, and the chance to turn data into defect reduction and improved reliability. \n As a Quality Engineer you will: \n\n • As a Quality Engineer, review, approve and implement Engineering Change Notifications (ECN) and Process Change Notifications (PCN) to support manufacturing requirements efficiently.\n, • Lead assigned supplier commodities through safe launch activities, ensuring PPAP processes deliver compliant products and documentation prior to shipment.\n, • Lead quality investigations and resolution using 8D and practical problem-solving methodologies, driving timely, robust corrective and preventive actions.\n, • Conduct supplier audits for business-critical commodities to agreed schedules, ensuring consistent quality standards across the supply chain.\n, • Support continuous improvement initiatives to reduce defects, improve yield and enhance customer satisfaction using recognised quality tools.\n, • Contribute to cost-of-quality analysis and implement strategies that reduce scrap, rework and warranty claims.\n\n The Quality Engineer will bring: \n\n • Minimum 3 years' experience in Supplier Quality Assurance, Supplier Development, or Quality Engineering within an engineering or manufacturing environment.\n, • Practical experience applying PPAP, APQP, 8D/problem solving and auditing, with evidence of real-world use.\n, • Minimum 2 years' experience in a blue-chip manufacturing or engineering setting, operating automotive-level quality, procurement and supply chain processes.\n, • A strong understanding of ISO standards and the discipline required to ensure compliance across internal operations and suppliers.\n, • A relevant HND or BEng in an Engineering discipline, with Continuous Improvement or Lean qualifications a plus.\n\n This Quality Engineer role supports the wider drive for operational excellence, consistent standards and reliable delivery, aligning quality systems and supplier performance with the company's ambition to innovate in marine propulsion and bring new technology confidently to market. You'll be trusted to self-manage personal KPIs and champion continuous improvement from launch through serial production. \n Interested?: \n If delivering measurable quality improvements, strengthening supplier performance and driving robust investigations sounds like your next challenge, apply now for this Quality Engineer opportunity and take the next step in your career. \n Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. \n In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.

\n \n \n We're looking for a Senior Temporary Works Engineer to join our Kier Design team based in various locations. Kier Design are a highly regarded Tier 1 Contractor, with a 750 plus strong design consultancy team, recognised as a Top 30 employer on Glassdoor. Join us as a Senior Temporary Works Engineer and become part of one of the UK's leaders in temporary works design and management and construction-related technical services. As part of our 100-strong team, you'll get to work on hundreds of projects across one of the most diverse and high-profile portfolios in the country, with access to Kier's £11bn+ project pipeline – supporting complex construction and major infrastructure schemes from concept through to delivery. \n Location: Birmingham / Bristol / Cambridge / Cardiff / Glasgow / Leeds / Liverpool / London / Manchester / Newcastle / Norwich / Plymouth – agile working, with up to 1-2 days per week from home if desired Hours: 40 hours per week - some flexibility on hours available if desired, just let us know when you speak to us. \n We are unable to offer certificates of sponsorship to any candidates in this role \n We're seeking a skilled engineer to lead the delivery of construction engineering services, providing solutions which are safe and buildable. This is an opportunity to contribute to complex projects whilst working collaboratively with multidisciplinary teams. You'll play a key role in supporting our clients and enhancing our reputation for delivering innovative, engineered outcomes. This position offers the chance to develop your expertise whilst mentoring others and shaping technical standards across the organisation. \n Are you... \n \n • An incorporated member of a relevant professional institution (e.g. IEng MICE) with significant relevant experience, or have demonstrable relevant experience in the field\n, • Experienced in temporary works design and checking, above and below ground in all materials\n, • Able to lead the development of design solutions and provide technical assessment of third party designs\n, • Capable of managing project workloads and ensuring compliance with legal requirements and company policies\n, • Committed to continuous professional development and maintaining membership of a professional body\n \n What will you be responsible for? \n As a Senior Temporary Works Engineer, you'll be working within the Kier Design team, supporting them in delivering construction engineering services across a broad range of projects. We're seeking a skilled engineer to lead the delivery of construction engineering services, providing solutions which are safe and buildable. This is an opportunity to contribute to complex projects whilst working collaboratively with multidisciplinary teams. You'll play a key role in supporting our clients and enhancing our reputation for delivering innovative, engineered outcomes. This position offers the chance to develop your expertise whilst mentoring others and shaping technical standards across the organisation. \n Your day to day will include: \n \n • Leading temporary works design and checking, integrated with permanent works design as applicable\n, • Providing tender and bid winning support including outline design schemes, feasibility studies and value engineering solutions\n, • Managing technical aspects of projects, ensuring compliance with CDM Regulations and Kier's Quality Management System\n, • Developing positive relationships with clients and design teams, representing Kier at project meetings\n, • Mentoring and developing staff within Kier Design, promoting the engineering profession and maintaining knowledge transfer\n \n Rewards and benefits \n We're proud to be able to offer our brilliant people a wide variety of benefits that you can tailor to your needs. You can see more information of benefits here. \n Diversity and inclusion \n Making Kier a diverse and inclusive place to work is a huge priority for us. We're proud of the steps we've taken so far, but we know we must always do more. Our employees are key in shaping Kier's diversity and inclusion initiatives and our people have made a huge impact on how we work, by using their experiences to shape our policies. You can see our D&I action plan here. As a Disability Confident employer, we will ensure that a fair and proportionate number of disabled applicants that meet the minimum criteria for this role will be offered an interview. \n We look forward to seeing your application to #joinkier \n #LI-MA1 \n \n \n

Location: Coventry, UK (Office Based / Mobile) Territory: United Kingdom & Ireland Salary: £38,000 - £55,000 basic DOE Bonus: Uncapped performance bonus (typical OTE £15,000+) Benefits: Company Car, Healthcare, Pension, Increasing Holiday Entitlement, Ongoing Training Join a Global Leader in Optical Surface Metrology Our client is the UK subsidiary of a highly successful international technology group and a recognised leader in optical measurement and metrology solutions. They provide advanced non-contact measurement systems to customers in manufacturing, aerospace, automotive, medical technology, electronics, research and academia. Due to continued growth, they are seeking an experienced Technical Sales Engineer to develop business opportunities and support customers across the UK and Ireland. This role combines consultative technical sales with hands-on customer engagement and offers the opportunity to work with world-class surface metrology instrumentation at the forefront of engineering measurement technology. What's on Offer Competitive basic salary of £38,000 - £55,000 Uncapped bonus scheme with a typical OTE of £15,000+ Company car Company pension scheme Private healthcare package Increasing annual holiday entitlement Comprehensive product and applications training International training opportunities Long-term career development within a growing and stable organisation Supportive and collaborative team environmentThe Role Based in the Coventry office and working throughout the UK and Ireland, you will be responsible for promoting and selling advanced optical surface metrology solutions to industrial, research and academic customers. You will work closely with customers to understand their measurement challenges, demonstrate system capabilities and develop tailored solutions that deliver measurable value. Key Responsibilities Identify, develop and convert new business opportunities across the UK and Ireland Manage and grow relationships with existing customers Conduct technical presentations, demonstrations and consultations Understand customer applications and recommend appropriate metrology solutions Prepare quotations, proposals and technical documentation Manage the complete sales process from initial enquiry to successful order completion Work closely with applications, service and logistics teams to ensure customer satisfaction Maintain accurate CRM records, forecasts and activity reports Attend exhibitions, conferences and industry events Achieve and exceed agreed sales targets and objectivesAbout You Essential Proven experience in technical sales, applications engineering or sales engineering Degree or equivalent qualification in: Manufacturing Engineering Materials Engineering Or a related engineering or scientific discipline Strong presentation and communication skills Ability to build relationships with engineers, researchers and senior decision-makers Commercially aware with a consultative sales approach Self-motivated and capable of managing a territory independently Full UK driving licence Willingness to travel throughout the UK and IrelandHighly Desirable Experience in surface metrology Qualification, academic research or industry experience related to surface measurement, roughness analysis or topography measurement Experience selling metrology, scientific instrumentation, measurement systems or capital equipment Understanding of manufacturing quality control and precision engineering processes Knowledge of optical measurement techniques Familiarity with optical profilers, interferometry or non-contact measurement technologies Experience working with industrial, research or academic customers CRM experienceHow to Apply To apply for the Technical Sales Engineer position, please submit your CV and a member of the recruitment team will be in touch as soon as possible

Temp to Perm BMS Engineer £34888-£50881 We are looking for a skilled and proactive BMS Engineer with strong Siemens experience to support the operation, maintenance and development of Building Management Systems across Coventry University. You will be responsible for planned maintenance, fault finding, repairs and system optimisation, working with Siemens Desigo CC, X Works, Modbus, M-Bus and KNX. You will also support HVAC controls, graphics, alarms, trend logs, metering and energy efficiency improvements. About you: Level 3 City & Guilds or equivalent electrical, heating/ventilation or controls qualification. Experience working with commercial or industrial BMS systems. Strong Siemens Desigo CC and X Works experience. Good fault-finding and problem-solving skills. Knowledge of electrical systems and BMS/control technologies. Able to work independently and as part of a team. Travel to Coventry University Group campuses including Scarborough, Milton Keynes, Central London and Dagenham will be required, with occasional overnight stays

Mobile Electrician - Coventry & Surrounding Areas £37,289 Basic + £2,535 Standby + £1,500 Competency Payment | £45k-£50k+ OTE A Mobile Electrician is required to cover a regional portfolio of retail sites across Coventry and the surrounding areas, joining an established facilities management operation. The position involves looking after approximately 5-6 retail locations, carrying out a combination of planned preventative maintenance (PPM), reactive electrical repairs, fault finding and general electrical maintenance. The role offers a £37,289 basic salary, alongside a £2,535 standby payment and an additional £1,500 competency payment once the required electrical fault-finding training has been completed. The additional training is carried out during your probation period and includes a City & Guilds certificate, providing a recognised additional qualification while also increasing your overall package. With overtime, engineers in the role are typically earning £45,000-£50,000+, with the opportunity to increase earnings further depending on overtime worked. The Role As a Mobile Electrician, you'll be responsible for maintaining a small portfolio of retail sites across Coventry and nearby areas. You'll work as part of a regional engineering team, travelling between sites to complete planned and reactive electrical maintenance and ensuring any faults are diagnosed and resolved efficiently. This would suit an experienced Electrician, Mobile Electrician or Electrical Maintenance Engineer who is confident working independently and travelling between multiple commercial locations. You'll liaise with site teams, clients and fellow engineers to ensure maintenance works are completed safely, professionally and within the required timescales. Key Responsibilities Complete planned preventative maintenance and reactive electrical work across approximately 5-6 retail sites. Investigate, diagnose and rectify electrical faults. Carry out minor electrical repairs and associated maintenance. Assist other engineers with larger maintenance requirements when necessary. Travel between retail sites throughout Coventry and the surrounding area. Complete work within agreed SLA and KPI requirements. Record completed works accurately through job sheets and maintenance reports. Keep the maintenance management system updated with current job information. Ensure tools, testing equipment and materials are properly maintained and available. Work in accordance with electrical regulations, health and safety requirements and company procedures. Maintain positive working relationships with customers, site teams and colleagues. Participate in a 1 in 4 standby/call-out rota. What You'll Need NVQ/SVQ Level 3 in Electrical Installations or Maintenance, or a recognised electrical apprenticeship. 18th Edition Wiring Regulations. Previous experience in electrical maintenance, preferably within commercial, retail or facilities management environments. Experience completing both PPM and reactive electrical maintenance. Strong electrical fault-finding and diagnostic ability. Ability to work autonomously across multiple sites. Full UK driving licence. Experience working with commercial catering or bakery equipment would be beneficial, although full training will be provided. What's On Offer £37,289 basic salary £2,535 standby payment £1,500 competency payment following successful completion of training Additional training completed during probation City & Guilds certificate £41,324 total package after training £45,000-£50,000+ typical OTE Additional overtime earning potential 1.5x overtime Monday-Friday 2x overtime at weekends 40-hour working week Paid travel time 1 in 4 standby/call-out rota Company vehicle Vehicle available for private use and can be taken home Private healthcare 33 days holiday Life insurance Ongoing technical training and development About the Opportunity This is a strong opportunity for an experienced Mobile Electrician in Coventry looking for a role combining regional travel, varied electrical maintenance and a competitive overall package. You'll be responsible for a relatively small portfolio of around 5-6 retail sites, giving you the opportunity to build strong relationships with the locations while working with the wider regional engineering team. The employer also invests in additional technical training, including fault finding on catering and bakery equipment. This provides the opportunity to develop your skill set, gain a further City & Guilds qualification and increase your earning potential. Apply If you're an Electrician, Mobile Electrician or Electrical Maintenance Engineer based in Coventry or the surrounding areas and are looking for a role offering a company vehicle, paid travel, additional qualifications, private healthcare and genuine £45,000-£50,000+ earning potential, apply now for further information. All applications will be treated confidentially. Calibre Search promote equality in the workplace and we welcome applications from all suitably skilled or qualified candidates regardless of their sex, race, disability, religion/beliefs, sexual orientation or age. We act as both an employment agency and employment business

We are looking for a Senior Embedded Software Engineer to join a small, specialist team within a multinational company with a strong history in battery management system development. The work is varied but centres on vehicle traction batteries, from BMS software and electronics through to battery module and pack development, and you will support activities across the full product development lifecycle. The Senior Embedded Software Engineer will be responsible for: Writing C code for drivers and safety features on TI TMS570 and other ARM-based microcontrollers for the main BMS product. Implementing safety-related features of SafeRTOS in line with safety requirements. Creating and owning low-level design documents and supporting integration of auto-generated code and AUTOSAR-based software. Carrying out unit testing and static analysis against standards such as MISRA, CERT-C and MAAB. Debugging using tools such as Lauterbach, Tasking, Vector CANalyzer and ETAS INCA, and supporting vehicle and system-level issue resolution. Writing Python, CAPL and batch scripts to automate build, test and development processes. Managing software through version control (SVN) and CI/CD tools such as Azure DevOps and Jenkins. The Senior Embedded Software Engineer will have: A degree in Software Engineering or a related discipline. Strong embedded C skills, ideally on TI TMS570 or other ARM-based microcontrollers. Experience with safety-focused real-time operating systems such as SafeRTOS or FreeRTOS. Experience developing to ISO 26262 (or equivalent) and the V-model, including MISRA C, unit testing and code coverage. A background in high-integrity systems, ideally within automotive and HV applications. Hands-on experience with CAN, UDS and XCP, version control (SVN/Git) and CI/CD pipelines. Experience with Simulink auto-code generation, AUTOSAR, CERT-C or scripting languages would be advantageous. This role would suit a driven engineer who enjoys solving problems independently, thrives in a fast-paced team and wants to keep broadening their technical skills. If you'd like to hear more, submit your CV today and one of our consultants will be in touch

Temp to Perm Salary: (phone number removed) per annum Contractor Controller (Mechanical) Coventry University Group is looking for an experienced Contractor Controller (Mechanical) to join our Estates Team. In this role, you will supervise and coordinate mechanical maintenance contractors across the Group's estate, ensuring planned and reactive works are delivered safely, compliantly and to a high standard. The Role You will be responsible for: Coordinating planned, reactive and statutory mechanical maintenance. Managing contractor performance, KPIs and service levels. Reviewing RAMS and permits to work and auditing workmanship. Supporting mechanical compliance, inspections and testing. Providing technical guidance on mechanical building services, including HVAC, pumps, plant rooms and water systems. Using the Planon CAFM system to coordinate works and maintain accurate records. Liaising with contractors, technical teams and wider University stakeholders. Supporting continuous improvement across the Estates service. About You We are looking for an experienced Techanical Supervisor, Senior Mechanical Technician, Mechanical Maintenance Coordinator, Building Services Engineer or similar professional. You will ideally have: A relevant mechanical/building services qualification such as NVQ, City & Guilds or HNC, or equivalent experience. Strong mechanical building services knowledge. Experience supervising contractors and managing RAMS and permit-to-work processes. Knowledge of mechanical compliance and safe systems of work. Experience with CAFM systems would be advantageous. Excellent communication, organisation and problem-solving skills. The role covers multiple Coventry University Group locations, including Coventry, Scarborough, Milton Keynes, Central London and Dagenham, so travel and occasional overnight stays will be required. You will also participate in the management call-out rota. Join Coventry University Group and play a key role in maintaining safe, high-quality facilities that support our students, staff and wider communities

Role: Multi Skilled Maintenance Engineer Location: Coventry Salary: Competitive + Pension & Healthcare This is a Coventry-based role covering energy centres, network assets and customer substations, with occasional travel to other locations. You will participate in on-call, planned outages and incident response, including occasional evening, night or weekend work under working-time and fatigue controls. The Client: My client is a prominent and forward-thinking energy infrastructure provider in the United Kingdom, specializing in the design, delivery, and long-term operation of large-scale decentralized low-carbon utility networks. The company focuses heavily on urban district heating, cooling, and power solutions, managing critical assets that supply sustainable energy to thousands of residential and commercial properties. Renowned for its engineering excellence and commitment to the green transition, the business integrates cutting-edge technologies like industrial heat pumps and waste-heat recovery systems to drive urban centres toward a zero-carbon future. The Role The Multi-Skilled Engineer is responsible for the safe operation, planned and reactive maintenance, fault diagnosis, repair and improvement of the Coventry district-energy scheme. The role supports the energy centres, steam-to-water interfaces, medium-temperature hot-water (MTHW) distribution network and customer substations, working across mechanical, electrical, controls and instrumentation systems within the postholder's assessed competence. The postholder may be mechanically or electrically biased but is expected to provide a capable first-line response across disciplines, recognise the limits of their competence and obtain specialist support when required. The role protects customer continuity, asset integrity and statutory compliance through high-quality field work, accurate CMMS records, disciplined safe systems of work and participation in the on-call rota. Responsibilities Plant operation and network support Operate and monitor the Coventry energy centres, steam heat-exchange plant, gas-fired boilers, MTHW network pumps, plate heat exchangers, pressurisation systems, water-treatment equipment, thermal storage and customer-interface substations where these fall within operational boundaries. Complete plant rounds, readings and functional checks; identify abnormal pressure, temperature, flow, water quality, noise, vibration, leakage, alarm or equipment condition and take proportionate action. Carry out approved start-up, shutdown, duty and standby changeover, setpoint adjustment and return-to-service activities in accordance with operating procedures and the postholder's competence and authorisation. Respond to loss of supply, network pressure or temperature deviation, plant trip, leak and customer-interface fault; stabilise the system, protect people and assets, and escalate promptly where full recovery is not immediately achievable. Planned and reactive maintenance Complete statutory, mandatory, planned and reactive maintenance through the approved CMMS, following the work instruction, risk controls, equipment manual and required testing standard. Inspect, service, adjust and repair pumps, valves, actuators, strainers, heat exchangers, vessels, pipework, seals, bearings, couplings, motors, MCCs, variable-speed drives, control panels, sensors and instrumentation within assessed competence. Diagnose the underlying cause of faults using drawings, P&IDs, electrical schematics, test instruments, BMS trends, alarms and maintenance history rather than repeatedly resetting or treating symptoms. Complete repairs and component replacement to a suitable engineering standard, then test, functionally prove, reinstate and monitor the asset before closing the work order or handing it back to operation. Pressure systems, steam and MTHW Operate and maintain steam and relevant MTHW or associated pressure systems that fall within the Pressure Systems Safety Regulations 2000 (PSSR), in accordance with site procedures, defined safe operating limits and the applicable Written Scheme of Examination. Understand the system boundaries, hazards and stored-energy risks before work begins; prepare plant for inspection or repair through authorised isolation, lock-off, cooling, depressurisation, draining, venting and proving of a safe condition. Monitor the condition and correct operation of pressure, temperature and level instrumentation, protective devices, relief arrangements and interlocks; never defeat, bypass or adjust safety devices without the required written authority and change control. Treat steam release, water hammer, overpressure, loss of containment, corrosion, abnormal vibration or a defective protective device as a safety-critical condition; make safe within competence and escalate immediately. Safe systems and technical appointments Plan and carry out work under the clients safe systems, including approved RAMS, permits, isolations, lock-out/tag-out, test-before-touch, confined-space, work-at-height, lifting, COSHH, hot-work and task-specific controls as applicable. Exercise stop-work authority where conditions, competence, documentation or controls are inadequate, and place plant in a safe condition before seeking further instruction. Undertake electrical isolation, mechanical isolation, steam or pressure-system duties, gas work or other controlled activities only where trained, assessed and appointed for that specific scope. Controls, BMS, instrumentation and metering Provide first-line fault finding on BMS/SCADA, field sensors, actuators, control panels, communications, meters, MCCs and variable-speed drives, confirming that the physical plant condition agrees with the displayed graphics and alarms. Use point-to-point checks, trend data and functional testing to identify failed sensors, poor control response, recurring alarms, sequencing issues or communications faults and escalate software or specialist controls work when required. Support optimisation of plant sequencing, pump operation, network differential pressure, customer return temperature and system delta-T without compromising safety, service conditions or approved control philosophy. Protect approved settings, software backups and cyber-security arrangements. Do not make unapproved logic, setpoint-range, alarm, interlock or graphics changes; use the formal management-of-change process. Contractors, work quality and asset information Support and, when delegated, supervise specialist contractors by checking site induction, competence, RAMS, permits, isolations, work boundaries and reinstatement requirements before work starts. Monitor workmanship and progress, challenge unsafe or poor-quality work, witness testing where competent to do so, and ensure defects, waste, temporary arrangements and documentation are resolved before close-out. Support commissioning, snagging and operational handover of repaired, modified or new assets, ensuring drawings, O&M information, settings, training, spares and maintenance requirements are complete before acceptance. Person Specification Core technical capability A strong primary mechanical or electrical maintenance bias, together with practical cross-discipline knowledge sufficient to provide safe first-line diagnosis and support across an operational energy centre and heat network. Ability to read and use P&IDs, mechanical drawings, electrical schematics, control narratives, equipment manuals and safe operating procedures to plan work and diagnose faults. Working knowledge of boilers, heat exchanges, MTHW/LTHW networks, pumps, valves, pressurisation, water treatment, motors, drives, controls, BMS/SCADA, instrumentation and heat-metered customer interfaces. Competence with CMMS and digital reporting tools, and the ability to produce accurate maintenance records, defect descriptions, test evidence and shift handovers. Qualifications and experience - Essential Recognised Level 3 apprenticeship, NVQ, BTEC or equivalent in mechanical or electrical engineering, or demonstrably equivalent industrial maintenance experience. Relevant hands-on maintenance and fault-finding experience in energy, utilities, process, industrial, healthcare, campus, facilities or other critical infrastructure. Evidence of working safely across discipline boundaries, recognising competence limits and using specialist support appropriately, together with practical CMMS experience. Full UK driving licence and ability to join the Coventry on-call rota and attend site outside normal hours when required

Join an established engineering manufacturer supplying advanced industrial equipment to customers across a variety of global markets. We are seeking an Electrical Engineer to support the development, testing, commissioning and ongoing support of complex automated machinery. This is an excellent opportunity for an engineer with strong controls and automation experience who enjoys a hands-on role combining electrical, software and commissioning activities. Based in the West Midlands, the role will also involve occasional travel within the UK and overseas to support installation, commissioning and customer requirements. Electrical Engineer Responsibilities Commission and test advanced industrial machinery and automated equipment. Test and validate electrical control systems and machine safety functions. Configure, load and test PLC, HMI and motion control systems. Carry out machine calibration and prepare equipment for production and acceptance testing. Support the setup and commissioning of servo drives, inverter systems and associated control hardware. Develop and modify control system designs, including hardware and PLC software. Undertake functional testing to ensure equipment meets performance and customer specifications. Ensure compliance with relevant UK and international machinery standards. Provide technical support to customers and internal engineering teams. Assist with troubleshooting, fault finding and continuous improvement activities. Electrical Engineer Requirements Experience commissioning industrial automation, machinery or control systems. Ability to read and interpret electrical, pneumatic and hydraulic schematics. Experience working with low-voltage control systems. Knowledge of inverter drives, servo systems and motion control technologies. Good understanding of industrial sensors, actuators and machine automation. Practical fault-finding experience across electrical, pneumatic and hydraulic systems. Experience reading, modifying or developing PLC software. Comfortable using engineering software and standard PC applications. Knowledge of machine commissioning, testing and validation processes. Exposure to CNC machinery or automated manufacturing equipment would be advantageous. Electrical Engineer Benefits £40,000 - £45,000 per annum, depending on experience. Permanent, full-time position. Monday-Thursday: 7:30am-4:00pm. Friday: 7:30am-3:00pm. Opportunity to work on technically advanced engineering projects. Varied role covering controls engineering, commissioning and customer support. UK and international travel opportunities. Hands-on involvement throughout the machine and project lifecycle. Supportive engineering environment with ongoing technical development opportunities. Apply now or get in touch for more information about this Electrical Engineer opportunity in the West Midlands. ASC Connections Ltd acts as an employment business for temporary positions and an employment agency for permanent positions. We are committed to equal opportunity and diversity

Job Title: Fire Damper / Ventilation Engineer Location: Coventry, West Midlands Salary/Benefits: £27k - £38k + Training & Benefits We are recruiting for an experienced and hardworking Fire Damper Engineer in the Midlands region. Our client is a privately owned outfit, with imminent expansion plans and a diverse client portfolio. They are seeking someone with a good track record in the industry, and good hands-on experience of Fire Damper logging, testing and remedial repairs. Our client has a presence across the UK, therefore you will need to be adaptable to travel in line with company needs. For the successful candidate, they are offering excellent salaries, countless progession opportunities and usual package benefits (including vehicle). Consideration will be given to candidates from the following locations: Coventry, Solihull, Nuneaton, Tamworth, Lichfield, Cannock, Rugeley, Stafford, Wolverhampton, Walsall, West Bromwich, Stourbridge, Kidderminster, Droitwich Spa, Redditch, Worcester, Royal Leamington Spa, Rugby, Daventry, Leicester, Loughborough, Coalville, Burton upon Trent, Derby, Nottingham. Experience / Qualifications: Good track record working as a Fire Damper Engineer Ideally will hold the NVQ Level 5 in Fire and Smoke Dampers Robust technical knowledge, including BS9999 guidelines Will hold the BESA ticket Flexible to travel in line with company needs Able to work independently on site Good literacy, numeracy and IT skills The Role: Performing logging and testing of Fire Dampers Carrying out remedial works on Fire Dampers, including: TEK screw removals, collars and link swaps Installing and commissioning Fire Dampers Surveying ventilation systems for required works AHU cleans Identifying any system faults and making appropriate recommendations for works Auditing on completed works Producing regular service reports Maintaining strong working relationships with clients Alternative Job titles: Fire Damper Technician, Ventilation Engineer, Air Hygiene Engineer, Ventilation Technician, Fire Damper Inspector. Future Select are recruiting in the Compliance / Environmental industry, including: LEV / Critical Air / Clean Air / Air Hygiene / Fire Safety; we work with the best clients & candidates and supply the majority of permanent jobs in the market. We would be interested in speaking to candidates with experience in any disciplines from Risk Assessors, Service Engineers, Account Managers and Business Development/Operational Managers through to Director level. Future Select Copyright 2026

AVEVA PI Engineer Coventry - hybrid working Up to 80k Key Responsibilities Deliver digital engineering projects in line with company quality, health & safety, cybersecurity, project delivery and regulatory requirements. Take technical responsibility for projects, including requirements definition, system architecture, configuration, programming, testing, installation and commissioning. Provide ongoing technical support for AVEVA-based and third-party solutions, helping customers adopt modernisation and digitalisation best practices. Review engineering deliverables and coordinate structured testing with internal teams, customers and third-party stakeholders. Produce and review technical documentation, including system specifications, test documentation, operating procedures and support manuals. Ensure technical solutions are delivered against agreed time, cost and quality requirements. Identify technical, delivery and commercial risks and opportunities, communicating these clearly to project and customer-facing stakeholders. Provide technical guidance and mentoring to less experienced engineers. Work closely with service teams to support effective technical delivery and timely resolution of customer issues. Provide technical input into bids and proposals, including estimates, delivery planning and solution development. Represent the engineering function in customer meetings and technical discussions where required. Skills & Experience Strong practical experience with AVEVA technologies, with a good understanding of industrial digitalisation and modernisation solutions. Experience across SCADA, telemetry, industrial networking and software engineering. Exposure to platforms such as Geo SCADA, EcoStruxure Automation Expert or comparable industrial automation technologies. Experience working within project environments, either in a lead or supporting engineering capacity, across the full project lifecycle. Demonstrable experience delivering projects against agreed cost, quality and timescale requirements. Willingness and ability to work at customer sites in the UK and, where required, internationally. Understanding of cloud, hybrid cloud and on-premise architectures. Awareness of cybersecurity principles applicable to industrial control and operational technology environments. Experience within two or more relevant industries, such as Water & Wastewater, Oil & Gas, Pharmaceuticals, Food & Beverage, Critical National Infrastructure, Renewable Energy or similar sectors. Ability to communicate technical concepts and best practice effectively to customers and non-specialist stakeholders. Experience facilitating technical discovery, UX/UI or digitalisation workshops and translating customer requirements into practical solution designs. Knowledge of industrial communications, networking and modern integration technologies such as OPC UA, MQTT and REST APIs. Comfortable working with common operating systems and standard business software. Strong customer and stakeholder management skills, with the ability to identify, communicate and manage project risks and commercial opportunities

This is an excellent opportunity for an experienced BMS Engineer to join a large and complex estate in Coventry, supporting the performance, reliability and continuous improvement of critical building systems. The role offers exposure to a broad range of technologies, infrastructure projects, energy optimisation initiatives and smart building innovations. Client Details Our client, based in Coventry, is a large and highly regarded organisation with a diverse property portfolio. The estate is undergoing continual investment to improve building performance, sustainability and operational efficiency, creating an exciting environment for a technically capable BMS professional looking to broaden their experience and influence future developments. Description The BMS Engineer will: Maintain, monitor and optimise Building Management Systems across a varied estate. Deliver planned preventative and reactive maintenance to ensure system reliability and performance. Investigate alarms and faults, diagnose issues and implement effective solutions. Support commissioning activities, software modifications, controller configuration and system improvements. Manage and coordinate specialist BMS contractors, ensuring quality and performance standards are achieved. Work with building services teams to support HVAC and associated plant systems. Support network connectivity and communications protocols including BACnet, Modbus, M-Bus and KNX. Contribute to energy reduction initiatives and building performance improvements. Assist with BMS upgrades, extensions and innovation projects, including digital building technologies. Provide technical guidance and training to colleagues and stakeholders.Profile The successful BMS Engineer candidate will possess strong experience working with commercial or industrial Building Management Systems and will be confident carrying out maintenance, fault finding and system optimisation activities. They will have a sound understanding of building services systems and controls, alongside the ability to interpret technical drawings and specifications. You will ideally have: A relevant qualification in BMS, automatic controls, heating and ventilation, electrical installation or a related discipline within real estate and property. Experience working with BMS software, graphics and control platforms. Knowledge of HVAC systems and building services operations. Experience diagnosing faults on electrical and control systems. Strong communication skills with the ability to work collaboratively across multiple stakeholders. A proactive approach to improving system performance, energy efficiency and operational resilience. A full UK driving licence.Job Offer The role of BMS Engineer benefits from: Competitive salary of £40,000-£42,000 per annum. Generous pension scheme. Excellent holiday entitlement. Exposure to a large, technically diverse estate in Coventry. Long-term career development.People are at the heart of Michael Page. We are committed to creating an inclusive environment. As an inclusive recruiter we welcome applications from people of all backgrounds, identities and experiences. If you require any adjustments or accommodations during the recruitment process, we'll work with you to ensure you can perform at your best

Temp to Perm £32015-£39246 per annum Contractor Controller (Electrical) Coventry University Group is looking for an experienced Contractor Controller (Electrical) to join our Estates Team. You will supervise and coordinate electrical maintenance contractors across our estate, ensuring planned and reactive works, statutory inspections and minor projects are delivered safely, compliantly and to a high standard. Key responsibilities: * Manage and monitor electrical contractors and contract performance. * Coordinate planned, reactive and statutory maintenance. * Review RAMS and permits to work and ensure electrical safety compliance. * Monitor workmanship, KPIs and service levels. * Provide technical guidance and support with fault finding and incidents. * Use the Planon CAFM system to manage works and compliance records. * Liaise with contractors, technical teams and University stakeholders. About you: We are looking for an experienced Electrical Supervisor, Senior Electrician, Electrical Maintenance Coordinator, Building Services Engineer or similar. You will have: * Relevant electrical qualification (NVQ, City & Guilds, HNC or equivalent). * Strong knowledge of electrical building services and 18th Edition Wiring Regulations (BS 7671). * Experience supervising contractors and managing RAMS/permits. * Good understanding of electrical compliance and safe working practices. * Excellent communication and organisational skills. The role requires travel to Coventry University Group campuses including Scarborough, Milton Keynes, Central London and Dagenham**, with occasional overnight stays and participation in the management call-out rota. Join Coventry University Group and help ensure our campuses remain safe, compliant and well maintained for our students and staff

Location: Coventry with some overseas travel Salary: £40,000-£55,000 per annum, dependent on experience Hours: Monday-Thursday, 7:30am-4:00pm; Friday, 7:30am-3:00pm Job Type: Permanent, full-time The Opportunity A well-established machine tool engineering company in Coventry is looking for an experienced Control Systems Engineer. The successful candidate must have practical experience commissioning Siemens variable speed drives (S120), Siemens PLCs using STEP 7/TIA Portal and Siemens CNC controls. Duties & Responsibilities Commission a range of CNC machine tools. Test electrical control circuits and safety circuits. Configure, load and test PLC and CNC controls, mainly Siemens. Complete measuring system calibrations. Prepare machines for production trials. Load and test CNC systems, Siemens HMIs and servo drives. Design control circuits, including hardware and PLC systems. Functionally test machine tools against product and contract specifications. Ensure compliance with CE and UKCA requirements. Provide customer support. Candidate Requirements Practical experience commissioning Siemens S120 variable speed drives. Experience with Siemens PLCs, including STEP 7 and TIA Portal. Experience working with Siemens CNC controls. Ability to read electrical, pneumatic and hydraulic circuit diagrams. Experience with low-voltage AC and DC control circuits. Experience setting up and commissioning inverter drives and servo motors. Good working knowledge of actuators and sensors. Practical fault-finding experience across electrical, hydraulic and pneumatic systems. Understanding and practical knowledge of CNC machine tools. Experience reading and writing PLC programs. Competent using Windows, Microsoft Office, TIA Portal, STEP 7 and EPLAN. Basic NC programming experience. Siemens 840D experience would be advantageous. Well-motivated, confident and comfortable travelling overseas when required. Apply To apply for the Control Systems Engineer position, click Apply Now and upload your CV. A member of our recruitment team will be in touch to discuss your application and the next steps

Control Systems Engineer £40-60k + Overtime, Pension, OTE £70k + Excellent Training & Development Opportunities Coventry – Flexible Working Available Ref: 25559 Do you want to develop innovative PLC software for bespoke automation systems used by leading manufacturers? An Automation and Control Systems specialist, are currently seeking a Control Systems Engineer to join their growing engineering team. This business deliver bespoke machinery and industrial control solutions across a wide range of sectors including Automotive, Aerospace, Food & Beverage, Pharmaceutical, Logistics and Advanced Manufacturing. Controls Engineer – The Role: Design and develop PLC software from first principles using Siemens TIA Portal/S7 and/or Rockwell Studio 5000 Support legacy Siemens S7 Classic, STL and IL software where required Develop HMI and machine safety software in line with project specifications and safety requirements Configure and commission VFDs, servo drives, motion control systems and remote I/O Work with industrial communication networks including ProfiNet, Profibus, EtherNet/IP and similar protocols Read and interpret electrical drawings, I/O schedules and Functional Design Specifications Produce project documentation including FDS, commissioning records, test documentation and O&M manuals Carry out software testing, fault-finding and system validation during factory acceptance and site commissioning Work closely with Project Managers, Electrical Design Engineers, Panel Builders and Commissioning Engineers throughout project delivery Commission bespoke automation systems on customer sites across the UK, including occasional overnight stays where required Controls Engineer – What We're Looking For: Strong experience with Siemens TIA Portal/S7 and/or Rockwell Studio 5000 c5+ years' experience writing PLC software from first principles for industrial automation or special purpose machinery Machine safety software and functional safety principles Experience configuring and commissioning VFDs, servo drives, motion control systems and industrial control hardware Electrical fault-finding and interpreting electrical schematics Experience producing clear technical documentation including FDS and O&M manuals Strong problem-solving, communication and customer-facing skills Full UK Driving Licence and willingness to travel to customer sites as projects require Desirable experience includes: Siemens S7 Classic, STL or IL KUKA, ABB or FANUC robotics Motion control platforms including Siemens, Rockwell or Bosch Rexroth CNC control systems HMI, SCADA or Vision Systems Machine safety training or Functional Safety experience EPLAN Electric P8 Why Join? Work on bespoke automation projects across a wide range of advanced manufacturing industries Flexible or hybrid working during suitable software design phases Exposure to the latest PLC, Motion Control and Industrial Automation Technologies Paid overtime or time off in lieu for approved additional hours Ongoing in-house and supplier-led technical training and professional development Collaborative and supportive work environment, with opportunities for long-term career progression 37.5-hour working week, workplace pension and 23 days holiday plus Bank Holidays Interested? Located in Coventry,this role would be commutable from Birmingham, Nuneaton, Rugby, Stratford-upon-Avon and other surrounding areas. For further information call Sharon Hill

Pre-Commission Water Hygiene Engineer £32,000 - £36,000 (Depending on experience) Coventry (Nationwide Travel) Are you an experienced Water Hygiene Engineer looking for varied, nationwide contract work with a company that genuinely invests in your development? This could be the role for you. We are working with an established business in the water treatment sector, seeking a hard-working and experienced Pre-Commission Water Hygiene Engineer to join their team. Why this role? Your career development isn't just talked about here, it's actively invested in. You will get: £32,000-£36,000 basic salary (depending on experience) Company van Good pension scheme The opportunity to work on varied contracts nationwide Flexibility and overtime opportunitiesWhat will you be doing? Pre-commission cleaning, flushing, and closed system analytical testing/remediation Tank, storage, and cooling tower disinfection, cleaning, and chlorination TMV testing/servicing and shower head descale & disinfection Temperature monitoring, water sampling, and dead leg removals Working in compliance with ACOP L8 guidelinesWhat we are looking for: Minimum 2 years' experience in water treatment/water hygiene Water hygiene qualifications and a full, clean UK driving licence Flexibility to work overtime and travel nationwide Ability to obtain a full enhanced DBSAre you ready for the next challenge? If you're an experienced Water Hygiene Engineer looking to broaden your technical expertise with a company that values your growth and development, we'd love to hear from you. If this role applies to you, please get in touch. Apply now or contact Mackenzie Rees from Penguin Recruitment for a confidential conversation. Not actively looking for a new role? Even if you're just open to hearing about potential opportunities, please get in touch

Experienced and professional Commercial Gas Engineer required to work with a leading and highly reputable organisation. My client requires an experienced Commercial Gas Engineer to join their maintenance team, carrying out installation, maintenance and reactive repair works across commercial properties in Coventry. Location: Coventry Pay: £35.00 per hour (Umbrella or CIS) Hours: Full-time Start Date: ASAP Duration: Ongoing Commercial Gas Engineer Carry out installation and maintenance works across heating, ventilation, HVAC, commercial appliances and heat pump systems. Install, modify and maintain associated pipework, components and fittings. Conduct combustion system evaluations to ensure compliance with relevant safety regulations and operational standards. Monitor and evaluate combustion processes, identifying operational issues and recommending appropriate corrective measures. Ensure all gas works comply with relevant health and safety requirements, industry regulations, British Standards and Approved Codes of Practice. Attend reactive repair tasks allocated by planners and complete works within the required timeframes. Carry out fault diagnosis and complete repairs within the relevant trade area. Complete installation, maintenance and remedial works to a high standard. Communicate effectively with customers to establish expectations and ensure works meet their requirements. Liaise with clients throughout works to ensure issues are resolved and customer satisfaction is maintained. Complete all relevant paperwork, documentation and certification accurately.Requirements Level 3 qualification, where possible. 18th Edition, where possible. PASMA or IPAF, where possible. Enhanced DBS required. Strong understanding of gas health and safety requirements, British Standards and relevant Approved Codes of Practice. Experience diagnosing faults and carrying out reactive repairs. Good knowledge of associated commercial pipework, components and fittings. Full and valid UK driving licence. Strong communication and customer service skills. Ability to work independently and complete reactive works within required timescales.Please apply if interested and the consultant looking after this will be in touch! INDPS

PLC, Controls & Robotics Engineer We’re hiring a PLC, Controls & Robotics Engineer to work on advanced automation projects that combine robotics, CNC machine integration, and industrial control systems. This is a hands-on, high-impact role where you’ll be directly involved in designing, programming, and commissioning complete automated manufacturing solutions used by leading engineering customers across the UK and internationally. If you enjoy solving real engineering problems, seeing systems come to life, and working across diverse automation technologies, this role will suit you. What You’ll Be Doing Programming and commissioning PLC-based automation systems Developing HMI solutions for industrial machines and cells Working with FANUC robots (integration, programming, and support) Integrating robots with CNC machine tools and production systems Working across industrial networks (Profinet, Ethernet/IP, Profibus, TCP/IP) Supporting full system builds, including electrical wiring, panel build, and mechanical fitting Commissioning systems on customer sites (UK and overseas travel) Troubleshooting and supporting FAT/SAT and live production systems Implementing and validating machine safety systems (PLC safety & robot DCS) Why This Role? Work on real, high-value automation projects from concept to completion Mix of office, workshop, and on-site commissioning work Exposure to robotics, PLCs, CNC machines, and full system integration UK and international travel with varied, interesting projects Strong technical development and hands-on learning opportunities Requirements Level 4 (or equivalent) in Electrical, Automation, Mechatronics or similar Full UK driving licence

Robot Engineer Location: Coventry, West Midlands Salary: £45,000 – £55,000 per annum We have an exciting opportunity for a Robot Engineer to join a leading and dynamic engineering company specialising in bespoke automation and robotic solutions across a wide range of industry sectors. You will play a key role in the development, programming, installation and commissioning of robotic automation systems, working on innovative projects from initial concept and design through to final installation and customer handover. The role will focus on FANUC industrial robotics, supporting the integration of robotic systems into bespoke machinery and automated production lines. You will work closely with mechanical, electrical and controls engineers to deliver high-quality automation solutions tailored to customer requirements. Key Responsibilities Programming, configuring and integrating FANUC industrial robots for a variety of automation applications. Developing and optimising robot programs to achieve efficient, reliable and repeatable operation. Supporting the design, build and integration of robotic systems within bespoke automation and special-purpose machinery. Carrying out robot setup, calibration, testing and optimisation. Diagnosing and resolving robotic, electrical and control system faults during build, installation and commissioning. Working closely with mechanical, electrical and controls engineering teams to deliver complete automation solutions. Supporting factory acceptance testing (FAT), site installation, commissioning and customer acceptance. Developing and refining robot paths, cycle times and operating sequences to improve system performance. Interfacing robots with PLCs, sensors, safety systems, conveyors and other automated equipment. Producing and maintaining robot programs, technical documentation and commissioning records. * Providing technical support and troubleshooting assistance both in-house and at customer sites. We are looking for a proactive and technically capable Robot Engineer with a passion for industrial robotics and automation. You will enjoy solving complex engineering challenges, developing efficient robotic solutions and working collaboratively to deliver projects to a high standard. If you have strong robotics experience and are looking for a challenging role offering a salary of £45,000–£55,000, varied projects and opportunities for career progression, we would be keen to hear from you

Electrical Engineer – Coventry – Full-Time - On going TEMP An excellent opportunity has arisen for an experienced Electrical Engineer to join a leading global facilities management provider, working within a critical environment in Coventry. This is a fantastic role for an Electrical Engineer looking to develop their career within a technically demanding and highly regarded site. Role: Electrical Engineer Hours: 7:30am – 4:30pm Location: Coventry The successful Electrical Engineer will be responsible for installing and maintaining new plant and equipment, ensuring that plant faults and defects are swiftly rectified within a critical environment. Key responsibilities of the Electrical Engineer role include: Reacting to breakdown maintenance requests within required SLAs Applying technical awareness of computer room/call centre/trader operations, including power, UPS, CPS, distribution, and cooling systems Carrying out repairs to modular UPS systems Testing and diagnosing power quality issues, including harmonic distortion, using onsite power analysers Applying a risk-focused maintenance approach to plant and systems within data centres/critical environments Providing emergency response, standby, and call-out cover Escalating urgent issues to the Technical Services Manager Responding to work interruptions, outages, or emergencies in line with SLA requirements Ensuring all critical engineering maintenance documentation and records are kept up to date Advising the Facilities Management Team of changes in critical environment requirements Undertaking site surveys and producing Works Requests, Method Statements, and Risk Assessments for planned works Undertaking upgrade and install work Interpreting technical drawings, instructions, processes, and O&Ms Ensuring completion of all reactive helpdesk requests Monitoring and analysing environmental conditions and reviewing the loading/working conditions of critical equipment Completing incident reports for abnormal incidents affecting systems availability, determining root cause and preventative actions * Entering relevant quotes and remedial works onto the in-house system What we're looking for: Essential for this Electrical Engineer position is 18th Edition Electrical Wiring Regulations qualification. Desirable experience includes: building management systems (fault finding and operator use), VAV/FCU systems, chilled water circuits and chilled beams, HVAC systems, CDM process understanding, and testing/inspection of electrical systems. Strong communication and customer service skills are important, along with the ability to self-organise and manage assigned tasks. Experience of H&S procedures (COSHH, Working at Heights, Risk Assessments) is advantageous, along with IOSH and/or NEBOSH qualifications. Knowledge of emergency response protocols, Authorised Person status (e.g. AP15/12), and water hygiene (L8) would also be beneficial. Applicants should be willing to work over and above contracted hours when required. Interested? Apply now — this Electrical Engineer role offers a great opportunity to join a technically diverse and critical environment site

At VERIFI we are looking for a Field Service Engineer to work in the Verifi UK team, providing an exemplary service to our customers by maintaining our equipment on their trucks, coaching the local teams on best practices, and identifying opportunities for improvement during your customer visits. This Field Service Engineer role will be a part of our VERIFI UK team. We're a small team who operate on a remote basis. You will be based at home, however, will be covering a patch in the West Midlands and down to Oxfordshire. You'll spend approximately 80% of your time as the only Verifi employee at our customer sites, so you'll be an ambassador for our business and will be able to work flexibly and independently. Direct experience is not essential as you'll receive full training and support from your line manager and team to become fully fluent in all things Verifi. We're particularly interested in hearing from candidates who have previously worked in the concrete industry in any capacity. Verifi is part of Saint-Gobain UK & Ireland. We offer a smart operations platform designed for ready-mix concrete producers. It aggregates and analyzes real-time data from fresh concrete delivery operations to provide operational teams with a clear overview of current deliveries and long-term performance. This is a full-time role working remotely. You'll be flexible on start and finish times to meet our customer's needs - this could mean early starts to ensure issues are rectified to reduce downtime. In return for your flexibility, you'll be provided with a vehicle and the tools you'll need to do your job effectively. We're paying a generous salary plus bonus, pension, and lots of other flexible benefits. What we're looking for: A working knowledge of the ready-mix concrete industry An Electro-Mechanical aptitude is desirable and ideally, you'll possess a broad array of knowledge including , mechanical systems, pneumatic systems, 12/24 volt DC electrical systems, and hydraulic system principals A self-starter, ability to use initiative and a curious mindset Flexibility to travel and the ability to respond to short notice project work and critical incidents Excellent communication with the ability to coach and train local teams on our productWhat you'll be doing: Installation, Maintenance and Repair of Verifi by reviewing and analysing component performance reports to determine problem areas and develop resolutions. Coordinate problem resolution with other employees as needed always serving as the local liaison and first line of contact with the customer Technical work including installation, preventative and scheduled maintenance, calibration, and emergency service repair Build and maintain professional relationships with customers Act as a H&S ambassador, always operating within regulations and local site EHS policies and proceduresAre Verifi and Saint-Gobain inclusive employers? Saint-Gobain is a worldwide leader in light and sustainable construction, following our purpose of 'Making the World a Better Home'. We play a part in improving daily life through high-performance solutions. From wherever you are, let your unique personality and our values guide you every day to invent a more sustainable world. We understand that a diverse workplace is not only a more enjoyable place to be, but also facilitates better decision making and innovation. So, whoever you are, and whichever Saint-Gobain business you join, you can be sure of a warm welcome with us. And what about flexibility? At Saint-Gobain, we're always open to new ways of working. Everyone has different needs and commitments. We'll happily discuss any need you might have for this role. Whilst we can't promise to meet every request when we're recruiting, we do promise to listen. If you match our criteria, we will be in touch to discuss your experience and more about you as a person, we look forward to hearing from you

Fire & Security Engineer – West Midlands AlertSystems is a leading UK provider of business security systems. Our comprehensive product range includes our unique External Deterrent System, High-Definition CCTV Surveillance Systems, Access Control Systems, Remote Monitoring, Intruder and Fire Alarm Systems plus gates, barriers & turnstiles. We combine technical expertise, leading technology and a strong customer focus to help protect people, premises and assets. Fire & Security Engineer - based in or around Coventry We are recruiting a field based, experienced service engineer from the Fire & Security Industry, who can competently service and repair Fire, Intruder Alarms, CCTV and Door Access Control Systems plus gate, barrier & turnstiles. Candidates will ideally be based in or around Coventry. Interviews will be conducted via Microsoft Teams, or phone, on a date/time to suit your working day. What you’ll be doing - Attend commercial sites, within a designated geographical radius, to service electronic security systems: Intruder Alarms, Door Access Control Systems, CCTV and IP CCTV Systems. Maintain Fire & Security Systems. Fault find and remedial repairs on CCTV, Intruder Alarms and Door Access Control, Gate, Barrier & Turnstile Systems. Carry out on-site health & safety risk assessments. Effectively communicate with customers. What we’re looking for - Minimum of 3 years relevant industry experience in servicing, maintaining and fault finding on the various disciplines that we support and offer. Basic knowledge of IP Networking. Willingness to learn and develop in a fast-paced Security Industry. Product knowledge of the following will be beneficial but is not essential: Intruder: Texecom, Scantronic, Galaxy, Pyronix; Door Access Control: Paxton, TDSi, Maxxess, Honeywell, Gallagher; CCTV: Avigilon, Hikvision, Samsung and Dahua. Must have experience working on IP CCTV. Will be required to work on Emergency Callout rota. A UK driving licence and right to work in the UK required. A current ECS card is beneficial. A current IPAF licence is also beneficial. What we offer - A basic annual salary of £32,000 - £37,000 (depending on skill set) for working 40 hours a week Monday-Friday + overtime opportunities + standby £250 per week (rota system 1 in 5 weeks) + call-out @ £30 per hour + additional benefits. Training, development and support. Company van and expenses, iPhone and laptop, work tools, workwear and PPE all provided. 22 days holiday per annum + Bank Holidays + an extra day off for your birthday Holidays increasing with length of service. Group pension scheme contributions. Group Life Insurance Cover x1 annual salary. Employee Assistance Programmes including: BenefitHub App - employee rewards programme & incentives; Medicash App - health cash plan; (email address removed) App – health & Wellbeing support. PLEASE NOTE: Thank you for your application, unfortunately we can only respond to those offering the most relevant skills and experience as outlined in our advert. If you have not received an interview date within 14 working days of your email, please presume your application has been unsuccessful on this occasion

Role: District Plant Engineer – Multi Skilled Location: Coventry Salary: Competitive + Pension & Healthcare This is a Coventry-based role covering energy centres, network assets and customer substations, with occasional travel to other locations. You will participate in on-call, planned outages and incident response, including occasional evening, night or weekend work under working-time and fatigue controls. The Client: My client is a prominent and forward-thinking energy infrastructure provider in the United Kingdom, specializing in the design, delivery, and long-term operation of large-scale decentralized low-carbon utility networks. The company focuses heavily on urban district heating, cooling, and power solutions, managing critical assets that supply sustainable energy to thousands of residential and commercial properties. Renowned for its engineering excellence and commitment to the green transition, the business integrates cutting-edge technologies like industrial heat pumps and waste-heat recovery systems to drive urban centres toward a zero-carbon future. The Role The Multi-Skilled Engineer is responsible for the safe operation, planned and reactive maintenance, fault diagnosis, repair and improvement of the Coventry district-energy scheme. The role supports the energy centres, steam-to-water interfaces, medium-temperature hot-water (MTHW) distribution network and customer substations, working across mechanical, electrical, controls and instrumentation systems within the postholder's assessed competence. The postholder may be mechanically or electrically biased but is expected to provide a capable first-line response across disciplines, recognise the limits of their competence and obtain specialist support when required. The role protects customer continuity, asset integrity and statutory compliance through high-quality field work, accurate CMMS records, disciplined safe systems of work and participation in the on-call rota. Responsibilities Plant operation and network support Operate and monitor the Coventry energy centres, steam heat-exchange plant, gas-fired boilers, MTHW network pumps, plate heat exchangers, pressurisation systems, water-treatment equipment, thermal storage and customer-interface substations where these fall within operational boundaries. Complete plant rounds, readings and functional checks; identify abnormal pressure, temperature, flow, water quality, noise, vibration, leakage, alarm or equipment condition and take proportionate action. Carry out approved start-up, shutdown, duty and standby changeover, setpoint adjustment and return-to-service activities in accordance with operating procedures and the postholder's competence and authorisation. Respond to loss of supply, network pressure or temperature deviation, plant trip, leak and customer-interface fault; stabilise the system, protect people and assets, and escalate promptly where full recovery is not immediately achievable. Planned and reactive maintenance Complete statutory, mandatory, planned and reactive maintenance through the approved CMMS, following the work instruction, risk controls, equipment manual and required testing standard. Inspect, service, adjust and repair pumps, valves, actuators, strainers, heat exchangers, vessels, pipework, seals, bearings, couplings, motors, MCCs, variable-speed drives, control panels, sensors and instrumentation within assessed competence. Diagnose the underlying cause of faults using drawings, P&IDs, electrical schematics, test instruments, BMS trends, alarms and maintenance history rather than repeatedly resetting or treating symptoms. Complete repairs and component replacement to a suitable engineering standard, then test, functionally prove, reinstate and monitor the asset before closing the work order or handing it back to operation. Pressure systems, steam and MTHW Operate and maintain steam and relevant MTHW or associated pressure systems that fall within the Pressure Systems Safety Regulations 2000 (PSSR), in accordance with site procedures, defined safe operating limits and the applicable Written Scheme of Examination. Understand the system boundaries, hazards and stored-energy risks before work begins; prepare plant for inspection or repair through authorised isolation, lock-off, cooling, depressurisation, draining, venting and proving of a safe condition. Monitor the condition and correct operation of pressure, temperature and level instrumentation, protective devices, relief arrangements and interlocks; never defeat, bypass or adjust safety devices without the required written authority and change control. Treat steam release, water hammer, overpressure, loss of containment, corrosion, abnormal vibration or a defective protective device as a safety-critical condition; make safe within competence and escalate immediately. Safe systems and technical appointments Plan and carry out work under the clients safe systems, including approved RAMS, permits, isolations, lock-out/tag-out, test-before-touch, confined-space, work-at-height, lifting, COSHH, hot-work and task-specific controls as applicable. Exercise stop-work authority where conditions, competence, documentation or controls are inadequate, and place plant in a safe condition before seeking further instruction. Undertake electrical isolation, mechanical isolation, steam or pressure-system duties, gas work or other controlled activities only where trained, assessed and appointed for that specific scope. Controls, BMS, instrumentation and metering Provide first-line fault finding on BMS/SCADA, field sensors, actuators, control panels, communications, meters, MCCs and variable-speed drives, confirming that the physical plant condition agrees with the displayed graphics and alarms. Use point-to-point checks, trend data and functional testing to identify failed sensors, poor control response, recurring alarms, sequencing issues or communications faults and escalate software or specialist controls work when required. Support optimisation of plant sequencing, pump operation, network differential pressure, customer return temperature and system delta-T without compromising safety, service conditions or approved control philosophy. Protect approved settings, software backups and cyber-security arrangements. Do not make unapproved logic, setpoint-range, alarm, interlock or graphics changes; use the formal management-of-change process. Contractors, work quality and asset information Support and, when delegated, supervise specialist contractors by checking site induction, competence, RAMS, permits, isolations, work boundaries and reinstatement requirements before work starts. Monitor workmanship and progress, challenge unsafe or poor-quality work, witness testing where competent to do so, and ensure defects, waste, temporary arrangements and documentation are resolved before close-out. Support commissioning, snagging and operational handover of repaired, modified or new assets, ensuring drawings, O&M information, settings, training, spares and maintenance requirements are complete before acceptance. Person Specification Core technical capability A strong primary mechanical or electrical maintenance bias, together with practical cross-discipline knowledge sufficient to provide safe first-line diagnosis and support across an operational energy centre and heat network. Ability to read and use P&IDs, mechanical drawings, electrical schematics, control narratives, equipment manuals and safe operating procedures to plan work and diagnose faults. Working knowledge of boilers, heat exchanges, MTHW/LTHW networks, pumps, valves, pressurisation, water treatment, motors, drives, controls, BMS/SCADA, instrumentation and heat-metered customer interfaces. Competence with CMMS and digital reporting tools, and the ability to produce accurate maintenance records, defect descriptions, test evidence and shift handovers. Qualifications and experience - Essential Recognised Level 3 apprenticeship, NVQ, BTEC or equivalent in mechanical or electrical engineering, or demonstrably equivalent industrial maintenance experience. Relevant hands-on maintenance and fault-finding experience in energy, utilities, process, industrial, healthcare, campus, facilities or other critical infrastructure. Evidence of working safely across discipline boundaries, recognising competence limits and using specialist support appropriately, together with practical CMMS experience. Full UK driving licence and ability to join the Coventry on-call rota and attend site outside normal hours when required

The MHEV System Validation Engineer is responsible for ensuring successful integration and validation of hybrid powerpack systems across vehicle programs. Engineering knowledge of ICE/MHEV Propulsion systems/ integration experience. A working knowledge of electrical Engineering and battery technolog

JD>>SR Vehicle Controls Engineer, Coventry, UK Senior Vehicle Controls Engineer will be responsible for the development and implementation of by-wire control algorithms. You will work closely with the Embedded SW Engineers to develop vehicle dynamic control systems for electric vehicle chassis, as well as engage in calibration and testing of the component & system. • Define, design, and deliver vehicle dynamic control functions (ABS, TCS, ESC, Steering, ) including requirements, interfaces, and algorithms, • Implement function control in Simulink/Stateflow, • Conduct component testing using MIL and SIL techniques, • Work cross-functionally to deliver software components, • Support testing your SW component within the system on the HIL bench, • Support SW component verification & validation against requirements, • Outstanding academic background in Mechanical or Control Engineering, • Demonstrable relevant experience within automotive industry vehicle control systems, • Proficiency in control and estimation theory, vehicle dynamics and torque vectoring, • Strong knowledge of Simulink/Stateflow for real time on vehicle applications, • Experience with embedded coder for c code generation, • Experience with MiL, SiL and HiL testing techniques for unit & system test, • Vehicle network communication knowledge, e.g., CAN CANFD, • Experience using vector tools such as CANape & CANalyzer, • Familiarity with Autosar Application Layer & RTE, • Embedded C programming knowledge, • Understanding of v model techniques, Aspice and ISO26262 functional safety, • Flexibility to take on tasks outside of own comfort zone quick learner in a fast-paced work environment #J-18808-Ljbffr

This role is responsible to support the definition, development and delivery of Propulsion Systems (XHEV/BEV) systems, consisting of multiple hardware and software components, into OEM vehicles for our exciting, all new, Electrified Architecture platform. The ideal candidate will have virtual development and physical validation and integration experience of Powertrain/Propulsion Systems. You will be a key member of the team involved in System definition and providing hands‑on technical support integrating Hardware and Software into the Propulsion system. • Generation of targets and verification methods that are driven by Customer, Function Requirements and Functional Failure Analysis, • Contribute to the delivery of the powertrain into vehicle programmes, in line with the Systems Engineering discipline outlined by Product Creation System., • Provide technical support and assistance across the operational team on topics relating to the integration and harmonization of multiple interconnected components including issue resolution and objective data analysis, • Work with Technical Specialists and Subject Matter Experts on Attribute and Function Forward Strategies, including new Function Definition and Requirements, • Undertake any other work as directed by their line manager in connection with their job as may be requested, • System Functional Analysis - carry out a range of analysis and investigations of the customer requirements to define the expected system functionality and their performance targets., • Evaluate multiple system design concepts and maintain integrity between system and its components to arrive at a harmonized solution, • Define system requirements and cascade to sub‑system / component teams with a balanced attribute trade agreed with attributes and vehicle engineering that supports the cost and quality targets of the project, • System Integration – Define system logical and physical architecture, operating logic and a system integration plan, • Verification and Validation – Support the design and develop system integration tests and DVP, • Lead cross‑functional technical reviews on the systems; balancing commodity responses to deliver the best outcome for the customer, • Support improvement activities in process and quality, • Adhere to the defined systems engineering & programme delivery processes, • Vehicle Engineering, • Propulsion system sub system and component teams, • Controls systems, • Programme /Domain teams, • Relevant experience of working in an Automotive Electrified Powertrain Systems Engineering environment., • Relevant experience of system definition, system architecture development, requirements specification, design/performance modelling, systems integration, system assessment and acceptance, • Good verbal and written communications, • Analytical and problem‑solving skills, • Track record as an effective team player with strong interpersonal skills, • Full driving licence, • Experience in applying Systems Engineering and solving complex technical issues using a structured approach, • Experience in working in an agile or scrum methodology including use of JIRA for task management, • User of diagnostic/Data analysis tools; INCA/Canalyzer/Corvus/Matlab/picoscope/MDA, • Class 3 driving permit, • Knowledge of Agile/Scrum methodologies., • Experience of JIRA, • 4+ years of experience in systems engineering, integration, or propulsion system delivery roles., • Hands‑on experience working within automotive or electrified powertrain programs is highly preferred., • Excellent organizational and communication skills., • Strong problem‑solving mindset and attention to detail., • Ability to manage multiple tasks and priorities in a cross‑disciplinary engineering environment., • Bachelor’s or Master’s degree in Systems Engineering, Mechanical Engineering, Electrical Engineering, or a related field., • Additional training or certification in INCOSE, MBSE, or project management is an advantage., • Competitive Salary in line with level of experience, • UK Work Visa sponsorship for eligible candidates, • Opportunity to be part of world class product development projects, • Pension Scheme, • 28 Days Holidays (Annual + Bank Holidays). This role may offer the opportunity for hybrid working where you can split your time between working from home and in the office. Hybrid working is a voluntary, non‑contractual arrangement providing employees with more choice and flexibility around how, when and where they work, if suitable for their role. Further details can be discussed with the Hiring Manager at interview stage. The applications window for this position shall be closed any time as per the applications we may receive. #J-18808-Ljbffr

Our client, based in Coventry, is searching for a Lead Powertrain Component Engineer (Gasoline) to join the company on a permanent basis. • Specify, design, develop and sign-off of installed powertrain components and systems including cooling, air intake, exhaust, fuel, driveline and transmission., • Manage the integration and sign-off of powertrain components and systems to meet vehicle programme targets (timing, durability, performance and quality)., • Define system requirements, interfaces, packaging constraints and integration targets in support of vehicle development., • Lead interface with external engine and component suppliers to develop systems and components to agreed technical specifications., • Support the purchasing team by providing technical content for RFQs and contributing to the technical evaluation of supplier offerings., • Support FMEA activities to identify technical risks and ensure appropriate mitigation actions are implemented., • Develop Design Verification Plans (DVPs) and associated engineering validation documentation., • Support component, subsystem and vehicle testing and validation activities throughout the development programme., • Apply structured problem-solving methods to diagnose and resolve powertrain integration and vehicle development concerns., • Support prototype vehicle builds and provide hands-on engineering support to resolve installation and integration issues., • Work closely with Manufacturing to agree feasible manufacturing solutions and ensure Design for Manufacture principles are incorporated., • Identify, communicate and manage technical risks, open issues and engineering actions across the powertrain workstream., • Work flexibly across a range of powertrain components and systems according as required., • Strong experience in gasoline powertrain component and vehicle development., • Experience using CATIA V5 within an automotive engineering environment., • Experience developing one or more major installed powertrain components or systems such as cooling, air intake, exhaust, fuel, driveline or transmission., • Good understanding of complete powertrain installation and the interfaces between powertrain systems and the vehicle., • Understanding and practical knowledge of Design Verification Plans (DVPs) and FMEAs., • Strong understanding of automotive test and validation procedures and processes., • Knowledge of and experience using structured problem-solving methods., • Experience managing suppliers and working through technical issues to achieve the required engineering solution., • Confidence to challenge technical errors or concerns with suppliers and internal engineering teams where necessary., • Awareness of Design for Manufacture principles and their application to component and system development., • Understanding of engineering change processes and the progression of components through vehicle development., • Strong communication, time management and organisational skills., • Ability to work flexibly and adapt the level of involvement required across different powertrain systems., • Confidence to advocate engineering solutions while understanding the compromises required across vehicle attributes, timing and manufacture., • Engineering degree or equivalent qualification within a relevant subject., • Willingness and ability to travel globally to support development, supplier activities, customer events and concern resolution., • Experience supporting prototype vehicle builds and hands-on vehicle development activities. #J-18808-Ljbffr

PepsiCo in the United Kingdom (Coventry area) is seeking a Site Control Systems Engineer to lead the SCADA, PLC and advanced control infrastructures for a busy production site. You will drive cyber security adherence, maintain documentation, and oversee upgrades with system integrators. You will mentor technicians, manage 24/7 production support, and ensure data integrity, asset reliability, and compliance with global PepsiCo standards. #J-18808-Ljbffr

DRVN Automotive Group seeks a Lead EDS Design & Integration Engineer to join our electrical engineering team in Coventry. You will lead vehicle electrical system design, ownership of requirements, verification, and cross-functional integration with powertrain, body, chassis and software teams. You will oversee lab cars, HiL, and test rigs, drive DFMEA/DVP processes, and ensure changes are controlled and documented. Strong leadership and communication are essential. #J-18808-Ljbffr

Do you have skills and expertise to help manufacturers with their digital transformation journey? We are looking for an Engineer to join the team! In this role you will help SME manufacturing clients solve their most pressing problems using the latest digital tools and Industry 4.0 technologies. You will have the opportunity to work with external technology providers and experts within the University. • Working with the team to understand client’s challenges, identify cutting-edge digital technologies as solutions, and present clear recommendations for implementation. You'll be the go-to engineer for translating these solutions into clear, actionable recommendations for implementation and supporting technology transfer., • Developing proof-of-concept and demonstrable solutions for clients. This is where your engineering talent comes into play – turning ideas into prototypes that not only demonstrate feasibility but makes a huge impact., • Designing and building demonstrations that showcase the latest digital technologies to our clients. It's not just about presenting solutions; it's about engineering that leave clients excited and eager to embrace digital., • Leading digital transformation workshops, producing technical roadmaps that pave the way for success, writing impactful grant applications. For details on the experience and skills required, please refer to the job description (link here). The ideal candidate should have a strong interest in developing their knowledge in one or more of the following: • Automation Systems & Robotics, • AI and its applications in manufacturing, • IT and OT System Architectures, • Manufacturing Systems (ERP, MRP, MES and PLM) This role presents a unique range of career development opportunities: for people with business skills and experience to expand their technical knowledge and gain experience working with cutting-edge Industry 4.0 digital technologies. Similarly, people with a technical bias will have the opportunity to develop business consulting skills and gather valuable manufacturing business management exposure through supporting and mentoring business owners and company directors. Such business and technology exposure may appeal to people who have an entrepreneurial flair and are interested in broadening their horizons, working with a wider variety of SME manufacturers working across different sectors from food to engineering, and exploring opportunities with a view to starting their own business at some point in the future. As an engineer, you will receive training and coaching on the specific duties the role requires. There will also be numerous opportunities to develop your leadership style and lead on projects with support from a senior colleague. In addition, being a part of WMG can offer the successful candidate various opportunities for to get involved in academic research, in addition the general day-to-day duties of the role. The Warwick Manufacturing Group (WMG) is the largest department at the University of Warwick, with over 800 staff and nearly 3,000 students across undergraduate and postgraduate programmes in management, technology, and applied engineering. We are globally recognised for our world-class research, innovative industry partnerships, and teaching excellence, and we are proud holders of the Athena SWAN Silver Award and the Institutional Silver Award. #J-18808-Ljbffr

FANUC UK Limited in Coventry seeks an experienced controls engineer to lead PLC and HMI programming for robotic automation systems and process equipment. The role covers IT networking, electrical testing, and commissioning of decentralized control systems, with a focus on safety and robust system design. The candidate should have 5+ years in automation, Siemens S7/TIA expertise, and strong knowledge of ISO 60204 and related safety standards. Occasional travel and on-site work are required. #J-18808-Ljbffr

At PepsiCo UK, we’re proud to make some of the nation’s favourite snacks and drinks—like Walkers, Quaker, Doritos, Pipers, and Monster Munch. With sites across the UK, including our Quaker mill in Cupar and Doritos factory in Coventry, we’re also home to one of the world’s largest crisp factories in Leicester. This role plays a vital part in orchestrating the predictive maintenance strategy through our Engineering vision and asset Reliability framework. This position will provide specialist technical support and guidance relating to vibratory monitoring and other machinery condition monitoring to our manufacturing, service and utilities areas. Develop and implement an effective condition monitoring system to monitor performance of mechanical rotating machineries in order to improve reliability and availability assets • Vibration analysis (fixed and remote), • Thermography, • Acoustic monitoring, • Process statistics/analysis, • Lubrication programme, • Assist the Engineering shift and support teams in carrying out Equipment Failure, Root Cause Analysis and Reliability Analysis., • Supervise periodical condition monitoring and verification checks on various equipment using our fixed monitoring, remote monitoring system and other equipment condition monitoring systems and report any abnormalities., • Generate periodic survey reports/progress reports on all CBM activities., • Provide advanced support and direction to the site on CBM issues, • Responsible for reviewing and interpreting machine vibration data during root cause analysis (RCA) of failures. This includes real time and historical data in various formats from all existing systems and surveys, • Ensure the adequate frequency of the scheduled condition monitoring and reliability improvement programs relating to reliability and performance of equipment failures., • Prepare detailed condition monitoring and performance monitoring check lists, and estimated man-hour and job requirements., • Coordinate closely with other sections for Engineering shutdowns and carry out reliability and performance analysis including base line data collection and analysis following new installations, modifications, major maintenance or overhaul of mechanical machinery and equipment., • Identify needs for maintenance and overhaul of equipment based on condition monitoring, reliability, and performance data analysis and inform maintenance section to raise maintenance work orders., • Review and discuss equipment condition monitoring work progress, performance and related issues through the Reliability frame work, ensuring systematic and consistent implementation of work methods and procedures used in reliability management and engineering while recommending improvements., • Receive, investigate, and resolve complaints related to performance or condition of mechanical equipment and machineries, evaluate innovative technologies, and identify opportunities for improvement, recommending changes/upgrades to maximise asset availability., • Time served Engineer with a Mechanical/Electrical discipline, • Sound knowledge of rotating equipment such as pumps, bearings, gearbox, motors etc., • Industrial experience in a food manufacturing environment would also be an advantage, • Computer literate. Familiarity with computer software (word, excel, etc), • Strong problem solving skillset (Root Cause Analysis tools, Kaizen, Ishikawa, Cause and Effect), • Good influencing, presentation, communication and decision making skills, • Proven background in coaching of technician resource on the front line Why Join Us?We offer a competitive salary, bonus, flexible working, and a wide range of benefits—from critical illness cover and discounted gym memberships to enhanced parental leave and electric car schemes. Our commitment to wellbeing and career growth makes us a Top Employer for 14 years running. Equal OpportunitiesWe’rean equal opportunity employer, committed to the Equality Act 2010. We welcome applicants from all backgrounds and will provide any necessary adjustments to support you through the recruitment process. About PepsiCoPepsiCo products are enjoyed by consumers more than one billion times a day in more than 200 countries and territories around the world. PepsiCo generatednearly$92 billionin net revenue in 2024, driven by a complementary beverage and convenient foods portfolio thatincludes Lay’s, Doritos, Cheetos, Gatorade, Pepsi-Cola, Mountain Dew, Quaker, and SodaStream. PepsiCo’s product portfolio includes a wide range of enjoyable foods and beverages, including many iconic brands that generate more than $1 billion each in estimated annual retail sales. Guiding PepsiCo is our vision to Be the Global Leader in Beverages and Convenient Foods by Winning with pep+ (PepsiCo Positive). pep+ is our strategic end-to-end transformation that puts sustainability and human capital at thecentreof how we will create value and growth byoperatingwithin planetary boundaries and inspiring positive change for planet and people. For more information, visitwww.pepsico.com, and follow onX (Twitter),Instagram,Facebook, andLinkedIn@PepsiCo. #J-18808-Ljbffr

Direct message the job poster from EVera Recruitment Our client, a leading organisation focusing on battery cell research and manufacturing has an exciting opportunity for a BOM Engineer. The successful candidate will work alongside a small and growing team of Scientist and Engineers in Electrochemistry team for development and commercialisation of innovative cell designs. The BOM Engineer will: Reporting to the Production Control Lead, you’ll play a key role in ensuring our production operations run smoothly by managing and maintaining Bills of Materials (BOMs), production data, and ERP systems. Expect to collaborate across engineering, operations, and supply chain teams to: • Build and manage BOM structures and production part numbers in ERP, • Create and maintain item master data, routings, and production orders, • Support production scheduling by allocating time and materials effectively, • Ensure data accuracy for material forecasting and stock management, • Troubleshoot and resolve issues across production and control systems, • Track and report on production performance vs. schedule The BOM Engineer will be: Detail-oriented, organised, and confident navigating ERP systems and complex production data. If you’ve got a background in manufacturing or engineering environments and can thrive in a fast-changing setting, you’ll feel right at home. You’ll need: • Strong knowledge of BOM structures and production data, • A sound understanding of production systems and processes; understands how data is managed in a production system and what the implications of good/bad data management are on the downstream outputs., • Experience with ERP systems and data management, • Understanding of production processes and planning/scheduling, • An analytical mindset and an ability to manage complexity, • Flexibility and resilience under pressure To apply, simply submit a copy of your recently updated CV online, and a member of the EVera team will be in touch with more details! • Mid-Senior level, • Full-time, • Appliances, Electrical, and Electronics Manufacturing Referrals increase your chances of interviewing at EVera Recruitment by 2x Get notified about new Production Planner jobs in Coventry, England, United Kingdom. Coventry, England, United Kingdom 3 days ago Coventry, England, United Kingdom 1 week ago Birmingham, England, United Kingdom 1 week ago Lutterworth, England, United Kingdom 12 hours ago Warwick, England, United Kingdom 2 weeks ago Coventry, England, United Kingdom 2 weeks ago Birmingham, England, United Kingdom 1 week ago Ashby-De-La-Zouch, England, United Kingdom 4 days ago Kingsbury, England, United Kingdom 4 days ago Crick, England, United Kingdom 1 week ago Narborough, England, United Kingdom 2 days ago Hinckley, England, United Kingdom 2 days ago Coventry, England, United Kingdom 4 days ago Birmingham, England, United Kingdom 2 weeks ago West Midlands, England, United Kingdom 2 days ago Watford, England, United Kingdom 1 month ago Lutterworth, England, United Kingdom 1 month ago Birmingham, England, United Kingdom 1 week ago Crick, England, United Kingdom 1 week ago Wellesbourne, England, United Kingdom 2 months ago Tamworth, England, United Kingdom 1 month ago Kilsby, England, United Kingdom 2 weeks ago We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI. #J-18808-Ljbffr

Purpose of the Role To provide technical support and service coordination for FANUC ROBOSHOT customers, delivering FANUC UK Limited Coventry, GB, CV7 9DR • Act as the primary point of contact for ROBOSHOT customer service and technical enquiries, • Diagnose machine faults remotely using telephone, email, and remote support tools, • Provide troubleshooting support for electrical, mechanical, control, and process-related issues, • Support customers in minimising machine downtime and restoring production as quickly as possible, • Provide technical support across other FANUC products as required, • Log, prioritise, and manage customer cases through the ERP service management system., • Coordinate Service Engineer attendance when on-site support is required and provide technical support, • Plan and coordinate preventative maintenance activities for FANUC products, • Monitor open cases and provide customers with timely updates on progress and resolution activities, • Build and maintain strong customer relationships through professional and proactive support, • Deliver excellent customer service and contribute to continuous service improvement through feedback, • Ensure compliance with health and safety/environmental requirements, including RAMS, permits, and site access processes, • Ensure adherence to established processes, standards, compliance requirements and SLA’s, • Contribute to Service revenue, utilisation, and customer satisfaction targets/KPIs, • Maintain and develop technical knowledge of FANUC core products, applications, and related technologies, • Undertake any other duties within the scope of the role as required by the Service Manager, • Minimum of 4 years' experience supporting, maintaining, or troubleshooting industrial injection moulding machinery, CNC, machine tools, • Technical qualification in a relevant engineering discipline and/or equivalent industry experience., • Proven experience diagnosing and resolving faults on industrial machinery, automation equipment, or manufacturing systems., • Experience using CRM, SAP, ERP, or service management systems., • Strong fault-finding, analytical, and problem-solving skills., • Excellent communication and customer service skills., • Ability to manage multiple priorities and perform effectively under pressure., • Ability and drive to develop technical expertise across the wider FANUC product portfolio, • Fluent in English, • High customer satisfaction, • Achievement of utilisation targets and service related KPIs. • Positive contribution to customer retention and service business growth • Support wider operational initiatives as required., • Support internal projects and implementation activities., • Travel to customer sites and FANUC offices in the UK and overseas as required. The candidate should ideally be located within a 30-40 minute commute of the FANUC UK office in Coventry and must have the legal right to work in the UK. Requisition number: 741 Contract type: Regular Working time model: Full time Place of work: Office As an innovative company, FANUC offers an exciting workplace with attractive future prospects, where your professional and personal development is guaranteed thanks to the latest technology and the FANUC work-life balance. #J-18808-Ljbffr

Working alongside our client, an established high profile global manufacturer and supplier of injection moulding machinery and bespoke automation, to source a site-based Service Hotline Engineer. • Profit share bonus scheme, • Company car, • 25 days holiday plus bank hols, • Extra day off for your birthday, • Private medical insurance, • Life assurance, • Long term service awards, • Employee assistance programme, • PerkBox, • Critical illness insurance, • Group income protection insurance, • Dental insurance, • Travel insurance, • Good pension scheme, • Death in service benefit, • Private healthcare, • Exceptional job opportunity working for a premier market leader within injection moulding machinery and factory automation, offering an excellent company benefits package alongside extensive opportunities for development and career progression, • The successful Service Hotline Engineer will act as the primary point of contact for technical enquiries and customer service, • This position will suit a skilled Injection Moulding Engineer with strong machine maintenance background, technical expertise and professional communication skills, • In the role of Service Hotline Engineer, you will be responsible for diagnosing machine faults remotely using telephone, email and remote support tools, • As Service Hotline Engineer you will provide troubleshooting support for electrical, mechanical, control and process related issues, • Support customers in minimizing machine downtime and restoring production as quickly as possible, • Provide technical support across range of company product offerings as required, • Co-ordinate Service Engineer attendance when onsite support is required and provide technical support, • Plan and co-ordinate preventative maintenance activities for company products, • Monitor open cases and provide customers with timely updates on progress and resolution activities, • Log, prioritise and manage customer cases through the ERP service management system, • Build and maintain strong customer relationships through professional and proactive support, • Deliver excellent customer service and contribute to continuous improvement through feedback, • Ensure adherence to established processes, standards, compliance requirements and SLAs, • Minimum 5 years experience supporting maintaining or troubleshooting industrial injection moulding machinery, • Technical qualification in a relevant engineering discipline, • Proven experience diagnosing and resolving faults on industrial machinery, automation equipment or manufacturing systems, • Strong fault finding, analytical and problem solving skillsExcellent communication and customer service skills, • Experience using CRM, SAP, ERP or service management systems, • Strong technical knowledge of injection moulding machinery and automation systems, • Full UK Driving Licence, • Ability to manage multiple priorities and perform effectively under pressure Hotline Service Engineer, Hotliner, Field Service Engineer, Service Engineer, Technical Support Engineer, Maintenance Engineer, Installation Engineer, Injection Moulding, Plastics, IM Machinery, Automation For all UK job positions work seekers must be eligible to work and live in the UK #J-18808-Ljbffr

Location: Coventry or Warrington - Hybrid Salary: Up to £80,000 + Benefits Employment: Permanent We are looking for an experienced Lead AVEVA PI Engineer to take a leading role in the design and delivery of AVEVA PI solutions across a growing portfolio of projects. The business has a significant pipeline of AVEVA-related work and is looking to strengthen its internal technical capability. This is an opportunity to become a key technical leader, combining hands-on engineering with project leadership, consultancy and commercial input. You will lead AVEVA PI projects from initial concept and architecture through development, delivery and handover, while helping develop the wider team's technical capability. • Lead the design and delivery of AVEVA PI projects, • Develop PI solutions from initial architecture and design through to implementation, • Provide technical leadership across multiple projects, • Produce system designs, specifications and technical project documentation, • Support tendering, proposals and consultancy activities, • Advise on AVEVA licensing and licence modelling, including AVEVA Flex, • Provide support around System Platform and OMI, • Work closely with customers to understand requirements and develop appropriate technical solutions, • Guide and mentor engineers, supporting technical training and development, • Help identify further opportunities within existing customer accounts, • Contribute to the development of the company's wider AVEVA capability, • Progress towards becoming a long-term Technical Authority within the business We are looking for someone with strong hands-on AVEVA PI expertise who is comfortable taking technical ownership of projects. You will ideally have: • Strong experience with AVEVA PI / PI System, • Experience designing and developing PI solutions from scratch, • Strong understanding of PI architecture, development and system fundamentals, • Knowledge of AVEVA licensing and licence modelling, • Experience with AVEVA Flex, • Exposure to AVEVA System Platform and OMI, • Experience producing technical designs and project documentation, • Previous experience leading or taking technical ownership of engineering projects, • Strong customer-facing and communication skills, • Commercial awareness, ideally with exposure to tenders and proposals, • A proactive, self-starting approach with the ability to solve complex technical problems, • An interest in mentoring others and becoming a technical authority, • Experience within water & wastewater, utilities, gas distribution, food & beverage or wider process industries would be advantageous. The position can be based from either Coventry or Warrington, with hybrid working available. You should be within reasonable travelling distance of one of the offices and comfortable spending approximately 2-3 days per week working collaboratively with the wider team. The role is predominantly focused on engineering, design and project leadership, with limited site travel. • Salary up to £80,000, • Competitive company benefits package, • Hybrid working, • Long-term technical leadership progression, • Opportunity to become a recognised Technical Authority, • Significant pipeline of AVEVA PI projects, • Training, mentoring and wider technical development opportunities #J-18808-Ljbffr

The DRVN Automotive Group are seeking a Lighting Lead Engineer to join a small, fast-moving engineering team responsible for the development of high-performance and specialist vehicle programmes. The role will provide technical and delivery leadership for complete vehicle lighting systems throughout the product development lifecycle. Acting as the primary engineering interface for headlamps, tail lamps and associated exterior lighting, the role leads requirements capture, concept selection, optical and electronic integration, supplier delivery, validation, homologation, launch and series-production support. The role works across Design, Body, Electrical/Electronic, Software, Vehicle Engineering, Procurement, Manufacturing, Quality and the supply base to deliver compliant, distinctive, robust and cost-effective lighting systems to programme timing, performance, quality and investment targets. • Location: Coventry The DRVN Automotive Group is a sector-leading automotive group, specialising in the design, manufacture, and distribution of luxury automotive brands. Recognised globally for our commitment to innovation, quality, and engineering, we are proudly centred around delivering a world-class customer experience. Our recent launch of Evoluto, along with the reimagination of some of Ford Motor Company ' s most historically significant icons - including the RS200 and MK1 Escort - places DRVN at the forefront of modern automotive excellence. These projects provide our engineers with an exceptional platform to showcase their skills across various disciplines and be part of some of the most exciting modernisation programmes the industry has ever seen. • Own engineering delivery of front and rear lighting systems from concept through design, verification, release, launch and series production, including headlamps, tail lamps, daytime running lamps, direction indicators, stop lamps, position lamps, reversing lamps, rear fog lamps, side markers, reflectors and, where applicable, front fog, cornering and adaptive lighting functions., • Translate vehicle, styling, customer, legal and attribute requirements into controlled system, component and interface specifications covering optical performance, appearance, packaging, electrical load, diagnostics, thermal management, sealing, serviceability, mass, cost and timing., • Lead package and feasibility reviews, resolving interfaces with Class-A surfaces, body structure, bumpers, closures, trim, wiring, controllers, sensors, software and vehicle networks while protecting build variation, aiming and adjustment requirements., • Establish and maintain the lighting delivery plan, engineering bill of materials, requirement status, design maturity, issue log, risk register and gateway evidence; escape threats with clear recovery actions., • Chair technical reviews and lead structured problem-solving, failure investigation, design change and corrective action through to verified closure., • Support sourcing strategy, supplier selection and technical bid evaluation; define RFQ technical content, statements of work, deliverables, acceptance criteria and change-control expectations for lighting systems., • Lead the nominated supplier against agreed APQP and programme milestones, including concept freeze, optical feasibility, design freeze, tooling release, design verification, product validation, production approval and start of production., • Track supplier engineering, tooling, prototype, test, homologation and production-readiness deliverables; challenge assumptions, manage open points and implement recovery plans where timing, cost or quality is at risk., • Manage component targets and status for piece cost, tooling investment, mass, quality, warranty, capacity and timing, providing accurate gateway reporting and engineering input to commercial decisions., • Assess supplier capability in optical design, simulation, electronics, software, moulding, coating, joining, sealing, photometry, end-of-line test, traceability and volume industrialisation., • Create, agree and deliver DVP&R coverage for component and vehicle-level verification, including photometric and colour performance, EMC, electrical robustness, thermal performance, vibration and shock, environmental cycling, ingress protection, corrosion, chemical resistance, UV exposure, condensation and fogging, mechanical strength and life-cycle durability., • Ensure headlamp beam patterns, aiming, levelling, cleaning and adaptive functions, together with all signalling functions, meet defined performance and legal requirements across production tolerances and vehicle variants., • Own the engineering evidence required for applicable market approvals and complete-vehicle lighting installation compliance, working with homologation specialists and suppliers to secure approvals before programme gateways., • Lead DFMEA, boundary diagrams, interface analyses, design reviews, test failure resolution and engineering sign-off; ensure deviations are risk assessed, authorised and closed., • Support quality planning and production approval through control-plan review, dimensional and photometric capability, leak testing, end-of-line functional tests, traceability, appearance standards and issue containment., • Ensure lighting designs are suitable for manufacture, vehicle assembly, adjustment, calibration, service and repair, with robust datum strategies, tolerances, fastening, sealing, connector access and poka-yoke provisions., • Support prototype and pre-production builds, vehicle integration, night-drive evaluations, optical aiming, software calibration, production trials and launch readiness., • Define build, inspection and acceptance requirements and resolve dimensional, appearance, condensation, electrical, diagnostic, photometric and fit-and-finish concerns using data-driven root-cause analysis., • Provide engineering support for launch, warranty and series changes, ensuring lessons learned are captured in specifications, standards and future programmes., • Act as the primary technical and delivery point of contact for vehicle lighting decisions, risks, issues and escalations across programmes., • Coordinate Design, Body, Electrical/Electronic, Software, Vehicle Integration, Attribute, Test, Homologation, Quality, Procurement, Manufacturing, Aftersales and supplier teams to achieve aligned outcomes., • Communicate delivery status, technical recommendations, risks and trade-offs clearly to engineering leadership and programme stakeholders., • Strong knowledge of automotive lighting optics, photometry, light sources, reflectors, projectors, light guides, lenses, bezels, housings, thermal management, coatings, adhesives, vents, sealing and condensation control., • Understanding of LED drivers, power electronics, wiring interfaces, vehicle networks, diagnostics, software-controlled functions, EMC and electrical validation., • Working knowledge of applicable automotive lighting regulations and approval frameworks, including installation, road-illumination, light-signalling and electromagnetic-compatibility requirements for target markets., • Competence in requirements management, DFMEA, DVP&R, tolerance analysis, engineering change control, problem-solving and interpretation of CAD, drawings, specifications and GD&T., • Strong technical judgement, programme delivery, supplier management and communication skills, with a practical, collaborative and detail-focused approach. Please note that this role is not eligible for visa sponsorship. Applicants must have the legal right to work in the UK at the time of application. Right-to-work checks will be carried out in accordance with Home Office requirements. We are committed to creating an inclusive workplace where everyone feels valued and respected. We welcome applications from candidates of all backgrounds and are proud to be an equal opportunities employer. If you require any reasonable adjustments during the recruitment process, please let us know and we will be happy to support you. #J-18808-Ljbffr

PLC Controls & Commissioning Engineer – Siemens TIA Portal – Automated Warehousing – Nuneaton / UK Site Work – £60–65k Samuel Frank is recruiting for an experienced PLC Controls & Commissioning Engineer to join a growing automation business delivering turnkey automated warehouse and material handling systems across the UK. The role requires an engineer with strong Siemens PLC programming skills who is equally comfortable commissioning, troubleshooting and supporting control systems on customer sites. Projects vary in duration, and commissioning activities can involve extended periods working away from the Nuneaton office. Flexibility is essential, with the successful engineer expected to work wherever the project requires, whether that's PLC development in the office or commissioning on-site. Key aspects of the PLC Controls & Commissioning Engineer role include: Programming, developing and modifying Siemens PLC software using TIA Portal, with a strong focus on Structured Text. Commissioning, troubleshooting and providing technical support for automated warehouse, conveyor and pallet handling systems. Working on turnkey automation projects, from software development and testing through to installation, commissioning and handover. Diagnosing PLC software, electrical and control system faults during commissioning and operational support. Supporting project delivery at customer sites, with commissioning phases potentially lasting several months. Undertaking PLC development, testing and engineering activities at the company's Nuneaton facility between site assignments. Exposure to other PLC platforms, including Beckhoff and Allen Bradley. Working closely with a small UK engineering team and international colleagues. Key requirements of the PLC Controls & Commissioning Engineer role include: Strong Siemens TIA Portal programming experience is essential. Proven ability to write, interrogate, modify and troubleshoot PLC software, including Structured Text. Hands-on commissioning experience, ideally involving automated machinery, conveyors, warehousing or material handling systems. Ability to diagnose and resolve electrical, controls and software issues on-site. Experience supporting automated systems through installation, commissioning and operational handover. Willingness and flexibility to spend extended periods working at customer sites throughout the UK. A background in electrical engineering, automation, mechatronics or machinery commissioning would be advantageous. Experience with Beckhoff or Allen Bradley would be beneficial. Likely to suit a mid-to-senior level engineer with substantial industrial automation experience. The successful PLC Controls & Commissioning Engineer will be joining at an early stage of the company's UK growth, with several projects already secured and further opportunities planned. This position will particularly suit an experienced Siemens Controls Engineer who enjoys combining PLC software development with hands-on commissioning and fault finding, rather than working exclusively in a software development environment. TPBN1_UKTJ

Location: Whitley Depot, Coventry Service: Facilities Management Rate: £30 per hour PAYE – market rate considered Hours: Full-time, including participation in an out-of-hours/on-call rota Coventry City Council is looking for an experienced Commercial Gas Engineer to join its Facilities Management team. Reporting to the Facilities M&E Manager, you will provide high-quality building services across Council properties, carrying out planned maintenance, reactive repairs, installations and project-related works. This is a hands-on engineering position and is not a supervisory or management role, although you will be expected to support and mentor apprentices and trainees. • Install, maintain and repair commercial gas, heating, HVAC, ventilation and heat pump systems., • Carry out fault diagnosis and reactive repairs within agreed timescales., • Complete planned preventative maintenance (PPM) on heating and combustion systems., • Conduct combustion testing and system evaluations to ensure safe and compliant operation., • Install and modify associated gas, heating, hot and cold water pipework and fittings., • Carry out general plumbing works where required and identify potential Legionella risks., • Ensure all work complies with relevant gas safety legislation, British Standards and Approved Codes of Practice., • Record completed works, materials and job information accurately using a computer-aided facilities management (CAFM) system., • Provide quotations and estimates for remedial works and new projects when required., • Communicate effectively with customers, colleagues and managers regarding works and progress., • Maintain tools, equipment, vehicles and work areas to appropriate health and safety standards., • Report any safety concerns or hazards promptly., • Participate in the out-of-hours/on-call rota., • Provide guidance and mentoring to apprentices and trainees., • Current Gas Safe registration with relevant commercial gas competencies., • Relevant ACS / City & Guilds or equivalent commercial gas qualifications., • Experience working with commercial and/or industrial gas systems., • Experience in a maintenance or similar commercial engineering environment., • Knowledge of combustion systems, fault diagnosis and troubleshooting., • Knowledge of gas safety, emissions and relevant regulatory requirements., • Experience with heating systems, hot/cold water and associated pipework., • Approved apprenticeship or equivalent relevant industry experience., • Full valid UK driving licence., • Willingness to participate in an out-of-hours/on-call rota., • Level 3 relevant qualification., • 18th Edition electrical qualification., • PASMA., • IPAF., • Additional electrical knowledge or qualifications., • Experience with oil-fired systems and heat pumps. The successful candidate will be required to complete an Enhanced DBS check prior to appointment. The ideal candidate will be a qualified Commercial Gas Engineer with strong experience in commercial heating and combustion systems. You should be confident working independently on both planned and reactive maintenance, diagnosing faults, completing repairs and ensuring all work meets the required safety and compliance standards. This role would suit an experienced Commercial Gas Engineer, Commercial Heating Engineer or Commercial Gas & Heating Engineer looking for a hands-on role within a local authority Facilities Management environment. #J-18808-Ljbffr

At Civic Recruitment and Limited, we know that individuals are more than just fixed expenses; they are the cornerstone of every thriving organisation. That’s why we are passionate about transforming recruitment in the public and private sectors. In the modern job market, organisations in both public and private sectors face significant workforce challenges. Public sector entities, such as local councils and central government departments, often struggle with lengthy recruitment processes, limited access to qualified candidates, and stringent budgetary and regulatory constraints. Private sector businesses, on the other hand, encounter high turnover rates, difficulties managing a mix of permanent and temporary staff, and challenges in sourcing specialised talent for niche industries. These sector‑specific obstacles, coupled with the universal complexities of payroll management, create a pressing need for efficient workforce solutions. Civic Recruitment Limited addresses these challenges with innovative recruitment and payroll solutions tailored for diverse organisational needs. Recognising the critical hurdles organisations face, the company leverages its expertise to streamline processes, reduce recruitment times, and alleviate administrative burdens. With an extensive database of over 1 million pre‑screened candidates, Civic Recruitment Limited is well‑positioned to cater to the specific needs of both public and private sectors. Location: Whitley Depot, Coventry Contract: Duration To Be Confirmed Hours: Full Time DBS: Enhanced DBS Required Driving Requirement: Full UK Driving Licence Required Coventry City Council is looking for a skilled Commercial Gas Engineer to become part of its Facilities Management team. The role involves reporting to the Facilities M&E Manager and executing planned and emergency maintenance, installations, and repairs across various commercial properties. The position requires working with commercial heating systems, HVAC, boilers, pipework, and related plant systems, ensuring all tasks are performed safely, efficiently, and in line with current legislation and industry standards. • Install, maintain, and repair commercial gas systems and equipment., • Conduct planned preventative maintenance (PPM) activities., • Diagnose and address faults through reactive repairs., • Install and replace:, • Commercial boilers, • Heating plant, • Pipework systems, • HVAC equipment, • Associated controls and fittings, • Perform testing, commissioning, and system evaluations., • Monitor energy performance and suggest improvements., • Ensure adherence to:, • Gas Safety Regulations, • Health & Safety Legislation, • British Standards, • Industry Codes of Practice, • Address urgent reactive maintenance issues., • Complete plumbing tasks related to heating systems., • Update CAFM systems and maintain accurate maintenance records., • Prepare quotations and estimates for remedial works., • Participate in the out‑of‑hours emergency call‑out rota., • Mentor apprentices and trainees as needed., • Maintain tools, plant, vehicles, and equipment in safe condition. Requirements: • Commercial Gas Qualifications (essential)., • Current and valid Gas Safe Registration., • Level 3 Qualification in a relevant trade discipline., • Experience in a commercial maintenance environment., • Strong skills in fault‑finding and diagnostics., • Experience with:, • Commercial Boilers, • HVAC Systems, • Commercial Heating Systems, • Combustion Equipment, • Plant Rooms, • Knowledge of gas safety legislation and compliance requirements., • Full UK Driving Licence., • Enhanced DBS Check., • 18th Edition Wiring Regulations., • IPAF Qualification., • PASMA Qualification., • Additional commercial gas certifications and accreditations., • Electrical knowledge or qualifications., • Experience in Local Authority or public sector environments., • Approved Apprenticeship or equivalent industry experience., • Relevant City & Guilds / NVQ / CITB qualification., • Commercial Gas Qualifications., • Gas Safe Registration and associated accreditations., • Enhanced DBS Required, • Bi‑weekly Pay, • Opportunity to work across a diverse commercial property portfolio., • Engage in a mix of planned maintenance, installations, and reactive works., • Participation in an out‑of‑hours call‑out rota. Ideal for candidates with experience as a Commercial Gas Engineer, Gas Maintenance Engineer, HVAC Engineer, Heating Engineer, Building Services Engineer, Combustion Engineer, Mechanical Maintenance Engineer, or Commercial Boiler Engineer. #J-18808-Ljbffr

To provide technical support and service coordination for FANUC ROBOSHOT customers, delivering effective remote fault diagnosis and resolution to maximise machine uptime and customer satisfaction. The role will initially focus on ROBOSHOT products, with the opportunity to develop technical expertise across other FANUC CNC product lines, including ROBODRILL and ROBOCUT. • Act as the primary point of contact for ROBOSHOTcustomer service and technical enquiries, • Diagnose machine faults remotely using telephone, email, and remote support tools, • Provide troubleshooting support for electrical, mechanical, control, and process-related issues, • Support customers in minimising machine downtime and restoring production as quickly as possible, • Provide technical support across other FANUC products as required, • Log, prioritise, and manage customer cases through the ERP service management system., • Coordinate Service Engineer attendance when on-site support is required and provide technical support, • Plan and coordinate preventative maintenance activities for FANUC products, • Monitor open cases and provide customers with timely updates on progress and resolution activities, • Build and maintain strong customer relationships through professional and proactive support, • Deliver excellent customer service and contribute to continuous service improvement through feedback, • Ensure compliance with health and safety/environmental requirements, including RAMS, permits, and site access processes, • Ensure adherence to established processes, standards, compliance requirements and SLA’s, • Contribute to Service revenue, utilisation, and customer satisfaction targets/KPIs, • Maintain and develop technical knowledge of FANUC core products, applications, and related technologies, • Undertake any other duties within the scope of the role as required by the Service Manager, • Minimum of 4 years' experience supporting, maintaining, or troubleshooting industrial injection moulding machinery, CNC, machine tools, • Technical qualification in a relevant engineering discipline and/or equivalent industry experience., • Proven experience diagnosing and resolving faults on industrial machinery, automation equipment, or manufacturing systems., • Experience using CRM, SAP, ERP, or service management systems., • Strong fault-finding, analytical, and problem-solving skills., • Excellent communication and customer service skills., • Ability to manage multiple priorities and perform effectively under pressure., • Ability and drive to develop technical expertise across the wider FANUC product portfolio, • Fluent in English, • High customer satisfaction, • Achievement of utilisation targets and service related KPIs., • Positive contribution to customer retention and service business growth, • Support wider operational initiatives as required., • Support internal projects and implementation activities., • Travel to customer sites and FANUC offices in the UK and overseas as required. The candidate should ideally be located within a 30-40 minute commute of the FANUC UK office in Coventry and must have the legal right to work in the UK. Requisition number: 741 Contract type: Regular Working time model: Full time Place of work: Office As an innovative company, FANUC offers anexciting workplace with attractivefutureprospects, where your professional andpersonal development is guaranteed thanks tothe latest technology and the FANUC work-lifebalance. #J-18808-Ljbffr

SR Plumbing is recruiting a Boiler Breakdown Engineer to handle domestic heating work across Coventry, West Midlands. This is a practical fault-finding role covering boiler breakdowns, heating repairs, servicing support and related plumbing tasks. It will suit someone who can turn up prepared, work through faults methodically and leave customers with a clear understanding of the repair. • Visit domestic customers for boiler breakdown, heating and hot water issues., • Trace faults across boilers, controls, radiators and wider heating systems., • Complete repairs safely, including related heating and plumbing tasks where appropriate., • Support servicing and landlord gas safety appointments when the schedule requires it., • Give customers a clear explanation of the fault and the recommended repair route., • Record job notes properly so the office team has a clear history of each visit., • Plan your day sensibly across the service area you are covering., • Gas Safe registered for domestic gas work., • A minimum of 3 years working on domestic boiler breakdown and repair jobs., • Practical understanding of heating controls, radiators, pipework and common system faults., • Confidence diagnosing issues across a range of boiler brands., • Full UK driving licence., • A tidy, reliable and customer‑conscious way of working., • Broad exposure to common domestic boiler brands., • Good knowledge of heating controls, valves and circulation problems., • Experience with CP12s, servicing and landlord maintenance visits., • Arrive prepared and manage appointments without close supervision., • Work through heating faults in a calm, structured way., • Finish repairs safely and leave the work area tidy., • Keep customers and the office updated when parts or follow‑on work are needed., • Build a reputation for reliable, professional visits., • £40,000 basic starting salary., • Company van for work appointments., • Uniform supplied., • Permanent full‑time position., • Work focused around agreed regional areas., • Job information and customer notes from the office team., • Additional hours available when workload allows. Covering Coventry, West Midlands and agreed nearby service areas for boiler breakdown and heating appointments. Full‑time field role built around customer appointments, urgent heating jobs and occasional call‑out demand. Apply below with details of your boiler repair background, Gas Safe status and the heating work you are strongest at. #J-18808-Ljbffr

Job Title: Fire Damper / Ventilation Engineer Location: Coventry, West Midlands Salary/Benefits: £27k – £38k + Training & Benefits We are recruiting for an experienced and hardworking Fire Damper Engineer in the Midlands region. Our client is a privately owned outfit, with imminent expansion plans and a diverse client portfolio. They are seeking someone with a good track record in the industry, and good hands-on experience of Fire Damper logging, testing and remedial repairs. Our client has a presence across the UK, therefore you will need to be adaptable to travel in line with company needs. For the successful candidate, they are offering excellent salaries, countless progession opportunities and usual package benefits (including vehicle). Consideration will be given to candidates from the following locations: Coventry, Solihull, Nuneaton, Tamworth, Lichfield, Cannock, Rugeley, Stafford, Wolverhampton, Walsall, West Bromwich, Stourbridge, Kidderminster, Droitwich Spa, Redditch, Worcester, Royal Leamington Spa, Rugby, Daventry, Leicester, Loughborough, Coalville, Burton upon Trent, Derby, Nottingham. • Good track record working as a Fire Damper Engineer, • Ideally will hold the NVQ Level 5 in Fire and Smoke Dampers, • Robust technical knowledge, including BS9999 guidelines, • Will hold the BESA ticket, • Flexible to travel in line with company needs, • Able to work independently on site, • Good literacy, numeracy and IT skills, • Performing logging and testing of Fire Dampers, • Carrying out remedial works on Fire Dampers, including: TEK screw removals, collars and link swaps, • Installing and commissioning Fire Dampers, • Surveying ventilation systems for required works, • AHU cleans, • Identifying any system faults and making appropriate recommendations for works, • Auditing on completed works, • Producing regular service reports, • Maintaining strong working relationships with clients Alternative Job titles: Fire Damper Technician, Ventilation Engineer, Air Hygiene Engineer, Ventilation Technician, Fire Damper Inspector. #J-18808-Ljbffr

Become part of a winning team at our UK Centre of Excellence and a Government strategic facility. As the successful candidate, you will be responsible for delivering an automation installation of high quality for project testing through the requirement capture, design, installation, commissioning, test programme delivery and service support. Identify and propose improvements in processes, tools, and system solutions, rolling out improvements when agreed with leadership team. The role is a full time, on-site role and will require both hands on and office based activities ensuring the delivery of solutions that are safe, cost effective and on time. This role involves work for customers who manage critical infrastructure; based on customer requirements it will be necessary to carry out background checks and suitability assessments (e.g. UK Security Clearance (SC)) as part of the hiring process. This position requires the successful candidate to work onsite throughout the week (expectations: 5 days per week). The Automation Engineer will be responsible for every part of the project delivery lifecycle including: • Requirement capture and detailed design of the automation system, ensuring it is maintainable, extensible, reliable, efficient and consistent with company standards., • Integration of the software and hardware components into one application., • Verification / validation of the system complete with hardware including with the power system under test., • Liaise with the other teams and disciplines within the company and customers and suppliers at all levels to facilitate the design and produce requirements and other system documents., • Provide maintenance, fault finding, diagnosis, repair, and upgrades / development as required., • Perform factory acceptance testing and commissioning work to the company's quality procedures., • Participate in Design reviews., • Assist in other areas of the business as required., • Degree in engineering, computer science, or related field., • This role involves work for customers who manage critical infrastructure; based on customer requirements it will be necessary to carry out background checks and suitability assessments.This is a sole UK National and holds, or is eligible to obtain, to secure "UK EYE's Only" security clearance., • This position requires the successful candidate to work onsite throughout the week (expectations: 5 days per week). The Automation Engineer should have the following skills or experience: • Advanced and demonstrated years of experience of implementing automation systems., • Experience in PLC programming, HMI creation and SCADA configuration., • Proficient in a variety of industrial communication protocols (e.g. Modbus, Profinet, EtherCAT, OPC-UA)., • Familiar with industrial networks and their implementation., • Knowledge of data acquisition systems (DAS) configuration and operation., • Solid understanding of computer programming and software development., • Hands-on hardware troubleshooting and software debugging experience., • Knowledge of electrical circuit operation / design. Knowledge of the following would be advantageous: • Data storage, IT systems., • Power Systems., • Test & Instrumentation., • Data processing and analysis., • Instrument / sensor selection., • Control systems., • Industrial cyber Security, (IEC 62443, Perdue model)., • Substation networking (61850, PRP)., • NI LABView, • Advanced analytical and problem solving skills., • Good verbal, written communication, and presentation skills., • Excellent attention to detail., • Exceptional organisational skills and experience with project management., • Capable of working as part of a multi-disciplined team., • Ability to prioritise and multi-task on a variety of projects to agreed time scales. GE Vernova’s Power Conversion & Storage business provides electrification systems that are critical to customers’ power and energy needs for their high performance applications. We work with some of the world’s major energy, maritime and industrial organizations, helping to enable a transition to energy efficiency and decarbonization, including through our specialist motors, power electronics systems, electrical drives and control technologies that evolve today’s industrial processes for a cleaner, more productive future. We serve specialized sectors such as energy, marine, industry and all related services. GE’s Power Conversion business, part of GE Vernova, provides electrification systems that are critical to customers’ power and energy needs for their high-performance applications. We work with some of the world’s major energy, maritime and industrial organizations, helping to enable a transition to energy efficiency and decarbonization, including through our specialist motors, drives and control technologies. Our engineers dedicated to Naval get involved in solving exciting challenges through leading the development and delivery of the engineering aspects of our projects. Projects that range from designing, de-risking and delivery of new power / propulsion and energy system solutions alongside digital & automation technologies to our UK and international customers both to surface and submarine systems. Research and development are key to what we do, and you will have the opportunity to influence and play a critical role in the successful execution of programs for future surface ships, submarines and future technology programs along with the growth of a unique world class facility, its optimised operations and the development of new capabilities Relocation Assistance Provided: No #J-18808-Ljbffr

Fire Alarm Service Engineer - Coventry - £38,000-£40,000 + Overtime Fire Alarm Service Engineer | Coventry | Permanent We are currently recruiting for an experienced Fire Alarm Service Engineer to join a well-established and growing fire and life safety company covering Coventry & surrounding areas. Due to continued expansion and increased customer demand, our client is looking to add a skilled service engineer to their permanent engineering team. This is a full-time, permanent role offering a competitive basic salary, overtime, on-call earnings, a company vehicle, and ongoing training with recognised fire alarm systems. • Salary: £38,000 - £40,000 per annum (negotiable depending on experience), • Overtime available, • On-call rota with additional earnings, • Company vehicle & fuel card, • Travel time paid, • Pension scheme, • Annual leave entitlement, • Ongoing training & manufacturer system training, • Permanent, full-time position, • Location: Coventry (field-based, multi-site), • Servicing, maintenance, fault-finding, and repair of fire alarm systems, • Working on addressable, conventional, and GENT fire alarm systems, • Full training provided, including GENT where required, • Carrying out planned and reactive maintenance across commercial sites, • Working with a variety of fire alarm manufacturers' systems, • Ensuring all works are completed in line with BS 5839 and current regulations, • Maintaining excellent communication with customers and internal teams, • Completing service reports and documentation accurately, • Supporting other engineers and assisting the wider team when required, • Full UK driving licence (essential), • Previous experience as a Fire Alarm Service Engineer or Fire Alarm Engineer, • Ideally 3+ years' experience within the fire alarm industry (desirable, not essential), • Strong fault-finding and servicing knowledge of fire alarm systems, • Experience working with multiple manufacturers' systems, • Willingness to undertake additional training and development, • Relevant certifications such as IPAF, CSCS/ECS, FIA, City & Guilds (desirable), • Positive attitude, strong work ethic, and self-motivation #J-18808-Ljbffr

Join an established engineering manufacturer supplying advanced industrial equipment to customers across a variety of global markets. We are seeking a Control Systems Engineer to support the development, testing, commissioning and ongoing support of complex automated machinery. Up to £45,000 + Benefits This is an excellent opportunity for an engineer with strong controls and automation experience who enjoys a hands‑on role combining electrical, software and commissioning activities. Based in the West Midlands, the role will also involve occasional travel within the UK and overseas to support installation, commissioning and customer requirements. • Commission and test advanced industrial machinery and automated equipment., • Test and validate electrical control systems and machine safety functions., • Configure, load and test PLC, HMI and motion control systems., • Carry out machine calibration and prepare equipment for production and acceptance testing., • Support the setup and commissioning of servo drives, inverter systems and associated control hardware., • Develop and modify control system designs, including hardware and PLC software., • Undertake functional testing to ensure equipment meets performance and customer specifications., • Provide technical support to customers and internal engineering teams., • Assist with troubleshooting, fault finding and continuous improvement activities., • Experience commissioning industrial automation, machinery or control systems., • Ability to read and interpret electrical, pneumatic and hydraulic schematics., • Experience working with low‑voltage control systems., • Knowledge of inverter drives, servo systems and motion control technologies., • Good understanding of industrial sensors, actuators and machine automation., • Practical fault‑finding experience across electrical, pneumatic and hydraulic systems., • Experience reading, modifying or developing PLC software., • Knowledge of machine commissioning, testing and validation processes., • Exposure to CNC machinery or automated manufacturing equipment would be advantageous., • £40,000 - £45,000 per annum, depending on experience., • Permanent, full-time position., • Monday-Thursday: 7:30am-4:00pm., • Friday: 7:30am-3:00pm., • Opportunity to work on technically advanced engineering projects., • Varied role covering controls engineering, commissioning and customer support., • UK and international travel opportunities., • Hands‑on involvement throughout the machine and project lifecycle., • Supportive engineering environment with ongoing technical development opportunities. We are committed to equal opportunity and diversity #J-18808-Ljbffr