Trabajos 1st shift en Houston, TexasCrear alertas

Job DescriptionHiring Immediately for 1st Shift Warehouse Associate – General Labor Jobs in Baytown, TX: If you’re looking for a First Shift Warehouse job, then look no further! Inergroup is looking for candidates who thrive in a fast-moving environment for Warehouse Associate – General Labor jobs in Baytown, TX. Pay: While working as a Warehouse Associate for Inergroup, you will earn weekly pay of $14 - $20+/hour + other great benefits! This position pays a regular hourly rate of $14 and you will be able to earn an additional $5+ per hour based on production incentives. • Employees who meet production goals currently earn $17.50/hr, • Top performers who exceed production goals currently earn $18 - $20/hr Job Duties – Primary responsibilities for Warehouse Associate – General Labor jobs include: • Working in a team environment to load and unload trailers, • Operate equipment to move materials around the warehouse, • Follow all safety guidelines and protocols to ensure a secure work environment., • Other warehouse, general labor activities Qualifications – Candidates should meet the requirements below for consideration for these Warehouse Associate – General Labor positions: • Ability to stand for entire shift and walk throughout the warehouse., • Ability to twist, lift, carry, push, pull products and lift up-to 50 lbs., • Strong work ethic and a commitment to punctuality and attendance., • Flexibility to adapt to changing tasks and priorities in a fast-paced environment., • Ability to follow both verbal and written instructions accurately. Benefits – Inergroup values our employees and we offer the following benefits: • Medical, dental, and vision plans, • Weekly pay and Paid Holidays, • Generous referral bonuses Apply Now: For instant consideration for this First Shift Warehouse Associate – General Labor job in Baytown, TX, click on Apply Now! - We are urgently hiring and look forward to welcoming you to our team!

Job Description Warehouse Picker Pay: $17.00 per hour Shift: 1st shift Location: Channelview, TX 77530 Integrity Trade Services is hiring a Warehouse Picker to start in Channelview, TX. Receive comprehensive benefits through ITS upon hire! Responsibilities • Accurately pick shipments according to order requirements, • Operate forklift safely to move, stage, and transport materials, • Assist with container unloading and general warehouse tasks, • Organize inventory and maintain storage areas, • Follow safety procedures and site-specific guidelines Qualifications • Previous forklift operating experience required, • Warehouse and order-picking experience preferred, • Ability to lift, handle, and move materials safely, • Strong attention to accuracy and detail, • Reliable attendance and strong work ethic Skills • Load and unload materials, • General warehouse knowledge, • Forklift operation skills, • Ability to work efficiently in a fast-paced environment, • Safety-conscious and team-oriented Why choose Integrity Trade Services At Integrity Trade Services, we value our employees by offering a competitive weekly paycheck and a comprehensive benefits package, including medical, dental, and vision insurance. Join a reputable company that prioritizes safety, fairness, and career development. Interested? Click Apply and check your email for follow-up instructions to complete your candidate profile with us. For additional, please call 281-479-1800 or text Brenda Gonzalez at 281-479-1803. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities #ZR #LOW1

Job Description Chiller Technician – Commercial HVAC Service Location: Houston, TX Position Type: Full-Time Shift: 1st Shift, Monday–Friday, 7:00 AM – 3:30 PM (Overtime available as needed) Pay: $48.00–$55.00/hour (DOE) Job Summary Our client is seeking an experienced Chiller Technician to join their commercial HVAC service team in Houston, TX. This role is responsible for diagnosing, servicing, repairing, and performing preventative maintenance on commercial HVAC and chiller systems. The ideal candidate has strong troubleshooting skills, experience with commercial mechanical systems, and a commitment to delivering quality service while maintaining a safe work environment. Responsibilities • Diagnose, troubleshoot, repair, and maintain commercial HVAC and chiller systems., • Perform preventative maintenance and inspections on commercial HVAC equipment., • Service and optimize the performance of:, • Air-cooled chillers (scroll and reciprocating), • Split systems (up to 25 tons), • Rooftop units (up to 50 tons), • Water source heat pumps (up to 15 tons), • Mini-split systems, • Self-contained units and CRAC systems, • Air handlers, VAV boxes, fan-powered boxes, VFDs, and exhaust fans, • Disassemble and reassemble HVAC equipment for repairs and scheduled maintenance., • Complete service calls and preventative maintenance efficiently while maintaining high-quality workmanship., • Communicate findings and completed work clearly with customers., • Maintain company vehicle, tools, and service inventory., • Purchase materials as needed and document work accurately., • Participate in an on-call rotation as required., • Follow all company safety policies and maintain a clean, professional job site. Qualifications • 2–5 years of commercial HVAC service experience., • High school diploma or GED required., • Technical or trade school education preferred., • Valid driver's license with a clean driving record., • Ability to troubleshoot and repair commercial HVAC equipment independently., • Strong knowledge of commercial HVAC systems, controls, and mechanical components., • EPA Certification and other applicable HVAC certifications are preferred., • Excellent customer service and communication skills. Schedule & Compensation • Schedule: Monday–Friday, 7:00 AM–3:30 PM, • Overtime: Available based on business needs, • Pay: $48.00–$55.00/hour, depending on experience Pre-Employment Requirements • Background Check: 7-year criminal history, • Drug Screen Required\nCompany Description Talent Corps is an equal opportunity employer. We value diversity and encourage applicants from all backgrounds, including veterans and individuals with disabilities, to apply. Talent Corps is an equal opportunity employer. We value diversity and encourage applicants from all backgrounds, including veterans and individuals with disabilities, to apply.

Job Description Inventory Put-Away Forklift Operator Pay: $17.50 per hour Shift: 1st shift Location: Channelview, TX 77530 Job Overview Integrity Trade Services (ITS) is seeking an experienced Inventory Put-Away Forklift Operator to support warehouse operations. This position requires strong forklift operating skills, experience using Warehouse Management Systems (WMS), and proficiency with RF scanners to accurately track, scan, and store inventory. The ideal candidate has previous warehouse experience, strong attention to detail, and the ability to work efficiently while maintaining accurate inventory records. Job Responsibilities Operate a forklift safely to move, transport, and put away incoming inventory. Use RF scanners to scan, identify, and track products throughout the warehouse. Utilize a Warehouse Management System (WMS) to update inventory locations and maintain accurate records. Verify product information, quantities, and storage locations during the put-away process. Ensure inventory is placed in the correct designated warehouse locations. Assist with receiving, staging, and organizing materials as needed. Maintain accurate inventory transactions and report discrepancies. Follow all warehouse safety procedures and material-handling guidelines. Maintain a clean, organized, and safe work environment. Qualifications Previous forklift operating experience required. Experience with inventory put-away and warehouse operations required. Hands-on experience using RF scanners and WMS systems required. Basic computer skills and the ability to enter and retrieve inventory information. Strong attention to detail and inventory accuracy. Ability to safely lift, move, and handle materials as required. Dependable, safety-conscious, and able to work independently or as part of a team. Why choose Integrity Trade Services At Integrity Trade Services, we value our employees by offering a competitive weekly paycheck and a comprehensive benefits package, including medical, dental, and vision insurance. Join a reputable company that prioritizes safety, fairness, and career development. Interested? Click Apply and check your email for follow-up instructions to complete your candidate profile with us. For additional, please call 281-479-1800 or text Brenda Gonzalez at 281-479-1803. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities #ZR #LOW1

Job Description Want to be considered for this opening immediately? Call our office at 713-680-9898! 1st and 2nd Shift Available! Job Summary We are looking for an experienced Crane / Forklift Operator to safely operate cranes, forklifts, and related material-handling equipment. The ideal candidate is dependable, safety-focused, and experienced in moving heavy materials in a warehouse, yard, construction, or industrial environment. Responsibilities • Operate forklifts, cranes, and other material-handling equipment safely and efficiently, • Load, unload, move, and position materials and equipment, • Inspect equipment before each shift and report any maintenance or safety issues, • Follow all company safety procedures and OSHA requirements, • Secure and properly handle loads to prevent damage or injury, • Maintain a clean and organized work area, • Communicate effectively with supervisors, coworkers, and ground personnel, • Perform other material-handling duties as assigned Qualifications • Previous crane and/or forklift operating experience preferred, • Valid forklift certification required; crane certification preferred, • Ability to safely lift, move, and position heavy materials, • Strong understanding of workplace safety procedures, • Reliable attendance and strong work ethic, • Ability to work outdoors and in varying weather conditions when required, • Ability to pass any required drug screening and background check Candidates already registered with us, please send an updated resume to interviews@lpcpersonnel.com and reference the job title. If you are not already registered, please apply by clicking the "Apply Now" button.

Job Description MATERIAL HANDLER – 77073 Pay Rate: $17.00–$18.00/hr 1ST Shift: 5:00 AM - 5:30 PM 2ND Shift: 10:00 AM - 10:30PM (4% differential after training) 3RD Shift: 4:00 PM - 4:30 AM (8% differential after training) Position Summary Seeking Material Handlers for all shifts listed above. The Material Handler is responsible for safely moving materials throughout the facility, supporting production operations, and maintaining inventory flow. Qualifications • Forklift & Combi lift experience required., • Experience operating a combi lift required., • Experience handling long tubular products required (27ft+)., • Ability to work in a manufacturing environment., • Strong safety awareness and attention to detail., • You must be able to work 12-hour shifts 5 to 6 days a week. Responsibilities • Load, unload, move, and stage materials throughout the facility., • Operate forklifts and combi lifts safely and efficiently., • Support manufacturing and shipping operations., • Maintain inventory accuracy and organization., • Follow all safety procedures and material handling guidelines.\nCompany Description ProSource People is a professional staffing agency dedicated to connecting qualified candidates with companies in need of reliable talent. We specialize in providing temporary, temp-to-hire, and direct-hire staffing solutions across a variety of industries, including industrial, office, and skilled trades. Our team focuses on matching candidates’ skills and career goals with the right opportunities, while supporting both clients and employees throughout the hiring process. We pride ourselves on professionalism, personalized service, and building long-term relationships with the people and companies we serve. ProSource People is a professional staffing agency dedicated to connecting qualified candidates with companies in need of reliable talent. We specialize in providing temporary, temp-to-hire, and direct-hire staffing solutions across a variety of industries, including industrial, office, and skilled trades. Our team focuses on matching candidates’ skills and career goals with the right opportunities, while supporting both clients and employees throughout the hiring process. We pride ourselves on professionalism, personalized service, and building long-term relationships with the people and companies we serve.

Job Description Job Description: Pre-Analytical Assistant I is responsible for general support functions within the Technical Operations Department. Tasks and responsibilities must be performed with confidence, accuracy and in a timely manner Performance task proficiency includes but is not limited to the following manual functions:- sorting- racking- pickup and delivery of specimens to the laboratory- specimen storage [this position might also be trained to run the sorters in archive mode]- centrifugation- aliquoting Job Accountabilities Demonstrates an ability to learn the job duties assigned to the Pre-Analytical Assistant I, and develops an understanding of how all the functions in Tech Ops and Specimen Processing work together and how they impact Technical departments and result quality. Identifies problems with specimen types, missing information etc., with regard to sorting, racking, centrifuging, delivery, and storage of specimens; is able to resolve or forward information in support of timely problem resolution. Demonstrates an understanding of compliance policies related to test ordering, which requires developing ability to research test order information on translation tables, computer system, and the directory of services. Meets quality and production standards within 6 months of completing training. Completes all required written documentation such that it is understandable to others, legible and within the assigned time frame. Reports to work on time, and follows attendance guidelines; supports the department's performance in the event of coworker absences. Learns additional functions within Tech Ops and Specimen Processing to allow timely progression to the next level. Performs other duties as assigned. Qualification: High School Diploma or GED. Minimal data entry skills Good organizational skills Understanding of specimen types related to test(s) ordered. Clinical department requirements with regard to specimen types and quantity needed for each test, specimen handling and delivery. Understanding of compliance regulations related to test ordering which may change on a daily basis Flexibility and a willingness to adapt to change and pursuit of continuous improvement Commitment to fulfilling internal and external customer requirements in the course of carrying out routine position responsibilities Willingness to actively contribute to a team based working environment º Ability and willingness to support the vitals of the department with regard to staffing needs on weekends, holidays, on call and overtime Medical background preferred which includes medical terminology applicable to a clinical laboratory. Handles multiple tasks simultaneously and works in a production environment. Communicates effectively with all levels of staff both verbally and written. Maintains composure while working under pressure. Reflects good judgment at all times when determining what action to take in resolving problems. Adheres, safety, compliance and work process policies and procedures. Works in a biohazard environment, in compliance with all applicable safety requirements. Keeps work area neat and clean; complies with 5S workplace standards. Able to sit, stand or walk for long periods; able to lift up to 50 lbs.; maneuver large carts and/or racks with specimens. Demonstrates strong interpersonal skills that foster a positive working environment. Demonstrates work assignment flexibility and ability to adapt to change. Must have some flexibility with regard to work schedule. Previous experience in a production environment preferred. Prefer familiarity with mainframe computers Shift/Time Zone: Shifts: Monday-Friday 9:00pm-5:30am Monday-Friday 11:30-8:00am Both rotating weekend as needed Benefits: Healthcare Insurance: Synectics offers eligible employees and their dependents healthcare coverage through BlueCross BlueShield of Illinois. Eligibility begins on the 1st day of the calendar month following 60 days of continuous full time employment with Synectics. Premiums are subsidized by Synectics. Dental Insurance: Synectics offers eligible employees and their dependents a dental plan through MetLife. Eligibility begins on the 1st day of the calendar month following 60 days of continuous full time employment with Synectics. Vision Insurance: Synectics offers eligible employees vision insurance through VSP. Eligibility begins on the 1st day of the calendar month following 60 days of continuous full time employment with Synectics. 401(k) Plan: The Synectics Inc. Investment Savings Retirement Plan. Synectics offers all employees who are 21 years of age or older the opportunity to invest in the 401(k) Plan on the first of the month following at least 1 calendar year after employment begins. Synectics is an equal opportunity employer. \nCompany Description Synectics is a leading staffing and workforce solutions company dedicated to connecting exceptional talent with top organizations. We specialize in IT, engineering, finance, healthcare, and professional services recruitment, offering both contract and permanent staffing solutions. With a people-first approach, we focus on understanding the unique needs of our clients and candidates to create long-term, successful matches. Our mission is to empower businesses with the right talent while helping professionals achieve rewarding career opportunities Synectics is a leading staffing and workforce solutions company dedicated to connecting exceptional talent with top organizations. We specialize in IT, engineering, finance, healthcare, and professional services recruitment, offering both contract and permanent staffing solutions. With a people-first approach, we focus on understanding the unique needs of our clients and candidates to create long-term, successful matches. Our mission is to empower businesses with the right talent while helping professionals achieve rewarding career opportunities

Job Description Material Handler - Forklift Operator Join our dynamic team and play a critical role in optimizing our production flow! We are seeking highly motivated and skilled Forklift Operator to work on 1st shift with expertise on a sit-down forklift to work in a fast-paced production environment. In this role, you will be responsible for the efficient and safe movement of corrugated paper materials throughout our facility, ensuring seamless production and adherence to stringent quality standards. Shifts: • First Shift (6 Am - 2 PM, Monday - Friday), • Second Shift (2 PM – 10 PM, Monday – Friday), $2/hr Shift Differential, • Third Shift (10 PM – 6 AM, Monday – Friday), $1/hr Shift Differential Key Responsibilities: • Safety Compliance: Adhere to all safety protocols and conduct thorough pre-shift forklift inspections, documenting findings and reporting maintenance needs., • Precision Material Movement: Operate forklifts with a focus on safety and efficiency to transport materials within the production and warehouse areas., • Production Line Optimization: Proactively manage material flow to production lines, ensuring timely and accurate staging to maintain uninterrupted operations., • Inventory Management: Accurately scan and transfer finished goods to designated warehouse locations, maintaining precise inventory records., • Warehouse Organization: Strategically stack and organize materials to maximize warehouse space and prevent damage., • Collaborative Teamwork: Work closely with other material handlers and warehouse personnel to achieve operational objectives., • Quality Assurance: Ensure the integrity of materials and finished goods during handling and transport. Qualifications: • Ability to pass internal forklift test and certification process., • Prior experience in a manufacturing or warehouse environment, preferably within the corrugated or packaging industry., • Two or more years in forklift operation with a strong emphasis on safety., • Experience using a RF Scanner and software for inventory management., • Excellent communication and interpersonal skills, fostering effective teamwork., • Demonstrated ability to work efficiently in a fast-paced environment., • Strong attention to detail and commitment to quality., • Availability to work overtime as needed (up to 12 hours and/or weekends) Here's why you'll love working at Hood Container: • Competitive pay & benefits: We offer a competitive wage starting $22/hr, a quarterly bonus program, and a comprehensive benefits package to keep you healthy and happy., • Continuous learning: We invest in training and development to help you grow your skills and advance your career., • Caring & Empowering Company Culture: Supportive & collaborative team dedicated to seeing you unbox your potential to help make a difference & make customers happy., • Growing: Company in a Sustainable Industry: Consider a Future in Corrugated Packaging Our goal is to be a diverse workforce that is representative, at all job levels, of the citizens and customers we serve. We are committed to building a team that represents a variety of backgrounds, perspectives, and skills. Hood Container Corporation is a family-owned, Mill to Market company, specializing in containerboard and kraft paper, corrugated boxes, high graphic displays, and contract packaging. Our commitment to customer happiness, employee well-being, environmental stewardship, and operational excellence drive our business. Over the last decade, Hood Container Corporation has grown to become one of the top ten Paper and Packaging Companies in the United States. To learn more about Hood Container Corporation visit www.hoodcontainer.com or check us out on social media!

Job DescriptionForklift Operators Temp to Hire 1st shift: Monday - Friday 7am - 3:30pm | Pay $18.00/hr 2nd Shift: Monday – Friday 3:30 p.m. – 12:00 a.m. | Pay: $18.00/hr. + $1.00/hr. Shift Diff. = $19.00/hr. MUST HAVE 3-5 YEARS OF RECENT FORKLIFT EXPERIENCE* Summary Use forklift, order picker and a pallet rider, to load, unload, move, stack, and stage products and materials Order Picker or Cherry Picker PIT Operator- MUST be comfortable working at high elevations as the lift does extend upwards Essential Functions and Responsibilities • Using a forklift, order picker and a pallet rider, to load, unload, move, stack, and stage products and materials • Work with radio frequency equipment for pricing, receiving, and put-away as required • Responsible for the accurate storing, picking, packing, and receiving of product • Maintain the facility’s equipment and materials in a neat, clean, and orderly fashion • On a daily basis, perform inspections on the lift equipment • Operate all lift equipment in a safe and efficient manner, following prescribed work methods • Understand and follow all policies and procedures set by the company • Strive to meet daily, weekly and monthly goals • Maintain a clean work environment •Strong sense of urgency with the ability to meet or exceed picking quotas • Other job duties when applicable Qualifications • One year in a warehouse environment • Familiar with warehouse concepts, practices, and procedures is required • Meeting safety, security, accuracy, and productivity standards of the facility • Must be authorized to work in the United States • Must be eighteen years of age or older • Excellent communication skills • Good math, reading and communication skills • Ability to operate a pallet jack, pallet rider, order picker and a sit sown • Reach truck and lifting a minimum of 50 pounds regularly and 75 pounds infrequently • Requires squatting, kneeling, bending and some overhead lifting. • Able to be flexible with a team attitude

Job Description Apply Today, Work Today Weekly Pay Job Description: We are Hiring Immediately for a Forklift Operator - Reach Truck position! Shift: 1st and 2nd Pays: $18/hr · Unload materials and merchandise from incoming vehicles and stack them to assigned places · Locate and move stock of products to pallets or crates for storage or shipment · Identify damages and report shortages or quality deficiencies · Transport raw materials to production workstations · Inspect machinery to determine the need for repairs and guarantee safety by performing regular maintenance · Keep updated records of inventory and activity logs · Comply with company policies and legal guidelines · Help maintain a safe and orderly environment of the facilities Skills · Proven experience as forklift operator or Reach Truck · Attention to detail and familiarity with industrial equipment · Excellent physical condition and coordination · Valid certification to operate forklifts · High school diploma · Spanish Job Requirements: • Ask about our Employee Rewards Program, • May be required to lift up-to 25lbs, • May be required to perform repetitive motions, • Must have reliable transportation, • Must be able to work in a team environment Additional Information: • Ask about our Employee Rewards Program, • Benefits include medical insurance, dental insurance, vision insurance and life insurance, • Some positions may not require background check or drug test Full-time, Part-time $11.50 - $18.00 / hr Shifts Available: • 1st Shift, • 2nd Shift, • 3rd ShiftFor this or other positions in your area. LI23 LILive24 Company DescriptionPartnering with a retirement planning company for a full time role.Partnering with a retirement planning company for a full time role.

Job Description Chiller Technician – Commercial HVAC Service Location: Houston, TX Position Type: Full-Time Shift: 1st Shift, Monday–Friday, 7:00 AM – 3:30 PM (Overtime available as needed) Pay: $48.00–$55.00/hour (DOE) Job Summary Our client is seeking an experienced Chiller Technician to join their commercial HVAC service team in Houston, TX. This role is responsible for diagnosing, servicing, repairing, and performing preventative maintenance on commercial HVAC and chiller systems. The ideal candidate has strong troubleshooting skills, experience with commercial mechanical systems, and a commitment to delivering quality service while maintaining a safe work environment. Responsibilities • Diagnose, troubleshoot, repair, and maintain commercial HVAC and chiller systems., • Perform preventative maintenance and inspections on commercial HVAC equipment., • Service and optimize the performance of:, • Air-cooled chillers (scroll and reciprocating), • Split systems (up to 25 tons), • Rooftop units (up to 50 tons), • Water source heat pumps (up to 15 tons), • Mini-split systems, • Self-contained units and CRAC systems, • Air handlers, VAV boxes, fan-powered boxes, VFDs, and exhaust fans, • Disassemble and reassemble HVAC equipment for repairs and scheduled maintenance., • Complete service calls and preventative maintenance efficiently while maintaining high-quality workmanship., • Communicate findings and completed work clearly with customers., • Maintain company vehicle, tools, and service inventory., • Purchase materials as needed and document work accurately., • Participate in an on-call rotation as required., • Follow all company safety policies and maintain a clean, professional job site. Qualifications • 2–5 years of commercial HVAC service experience., • Air cooled chiller experience required, • High school diploma or GED required., • Technical or trade school education preferred., • Valid driver's license with a clean driving record., • Ability to troubleshoot and repair commercial HVAC equipment independently., • Strong knowledge of commercial HVAC systems, controls, and mechanical components., • EPA Certification and other applicable HVAC certifications are preferred., • Excellent customer service and communication skills. Schedule & Compensation • Schedule: Monday–Friday, 7:00 AM–3:30 PM, • Overtime: Available based on business needs, • Pay: $48.00–$55.00/hour, depending on experience Pre-Employment Requirements • Background Check: 7-year criminal history, • Drug Screen Required\nCompany Description Talent Corps is an equal opportunity employer. We value diversity and encourage applicants from all backgrounds, including veterans and individuals with disabilities, to apply. Talent Corps is an equal opportunity employer. We value diversity and encourage applicants from all backgrounds, including veterans and individuals with disabilities, to apply.

Job Description Inventory/Receiving Clerk Location: Pearland, TX Pay Rate: $16.00 per hour Shift: 1st Shift Position Summary We are seeking a dependable and detail-oriented Inventory / Receiving Clerk to assist with daily warehouse operations. The ideal candidate will have previous inventory or receiving experience, strong computer skills, and the ability to maintain accurate inventory records. Responsibilities • Receive, inspect, and verify incoming shipments against purchase orders and packing slips., • Enter receiving and inventory information into the computer system accurately., • Maintain organized inventory records and assist with inventory tracking., • Identify and report discrepancies, damaged goods, or missing items., • Assist with inventory counts, stock organization, and recordkeeping., • Communicate with warehouse personnel and other departments regarding incoming materials., • Maintain a clean, organized, and safe work area. Qualifications • Previous inventory, receiving, or warehouse experience preferred., • Strong computer skills and comfort working with inventory systems., • Basic data entry and recordkeeping abilities., • Strong attention to detail and organizational skills., • Ability to follow instructions and work independently or as part of a team., • Dependable attendance and a strong work ethic. Compensation & Schedule • Pay: $16.00 per hour, • Shift: 1st shift, • Location: Pearland, Texas If you have inventory or receiving experience and strong computer skills, we encourage you to apply!

Job Description Container Unloader – Forklift Operator Pay: $16.00/hour Shift: 1st shift Location: Channelview, TX Integrity Trade Services is hiring a Container Unloader – Forklift Operator to start in Channelview, TX. Receive comprehensive benefits through ITS upon hire! Responsibilities • Manually unload products and materials from shipping containers, • Operate a forklift to assist with unloading and moving materials, • Rotate between unloading duties and forklift operation based on workflow, • Move and stage materials in designated warehouse areas, • Organize products and maintain an orderly work environment Qualifications • Previous forklift operating experience required, • Container unloading or warehouse experience preferred, • Ability to lift, move, and handle materials safely, • Comfortable performing physical labor and forklift operation, • Reliable attendance and strong work ethic Skills • Load and unload operations, • General warehouse procedures, • Forklift operation and safety protocols, • Palletizing, shrink wrapping, and count verification, • Freight handling and product replenishing Why choose Integrity Trade Services At Integrity Trade Services, we value our employees by offering a competitive weekly paycheck and a comprehensive benefits package, including medical, dental, and vision insurance. Join a reputable company that prioritizes safety, fairness, and career development. Interested? Click Apply and check your email for follow-up instructions to complete your candidate profile with us. For questions, please call 281-479-1800 or text Brenda Gonzalez at 281-479-1803. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities #ZR #LOW1

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic Inc. is seeking a dedicated and skilled Wiring Technician. The Wiring Technician will follow engineering drawings to install components onto relay panels, run and terminate wires according to Panelmatic Inc. standards. Job Duties: • Layout, measure, drill, and tap subpanels for initial assembly preparation, • Install din rail, equipment, SEL relays, Lock Out Relays, test switches, terminal blocks, nameplates, and wire duct, • Cut, tag, and run wire in specification to project drawings, • Alter and cut steel, plastic, or other various types of materials, • Ensure project quality within the specification, • Perform additional duties as needed to ensure the project schedule and timeline are met Requirements • High school diploma or equivalent required, • High levels of organizational and time management skills required, • High levels of analytical, observational, and active listening skills required, • High levels of reliability required, • Excellent communication skills both written and verbal required, • Ability to pass physical, drug, driving, and background check required, • Ability to physically push, pull, and lift 50lbs or more required, • Ability to stoop and bend required, • Ability to sit, stand, and walk for four plus hours at a time required, • Excellent manual dexterity required, • Excellent color vision and eyesight required, • Alignment with company core values required, • Two or more years of experience as a wiring technician preferred, • Two or more years of experience in NEC and UL codes preferred Benefits Benefits: • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid for by Panelmatic for the employee-only level medical coverage, • 80% paid for by Panelmatic and 20% paid for by the employee on all other level medical coverage (ie employee plus child, employee plus spouse, family), • 401K Retirement, • Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided, • PTO and paid holidays provided, • Career advancement opportunities, • Competitive wages, • Family-friendly environment with average employee tenure above five years

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic Inc. is seeking a dedicated and experienced Wiring Technician Lead to provide hands-on leadership and technical support within our wiring department. The Lead Wiring Technician will lead and support a team of Wiring Technicians in the assembly and wiring of custom electrical control panels while ensuring work is completed safely, accurately, and according to engineering drawings, project specifications, and Panelmatic standards. This role is responsible for helping coordinate daily work, providing technical guidance, inspecting completed work, troubleshooting wiring issues, and supporting the team in meeting project schedules and quality requirements. The Lead Wiring Technician will work closely with Production Supervisors, Engineering, and other team members to ensure projects are completed correctly and efficiently. Job Duties: • Lead and provide day-to-day direction and technical support to Wiring Technicians., • Review engineering drawings, wiring diagrams, schematics, and project specifications to determine assembly and wiring requirements., • Help assign and prioritize daily work based on project schedules and production needs., • Layout, measure, drill, and tap subpanels for initial assembly preparation., • Install DIN rail, equipment, SEL relays, lockout relays, test switches, terminal blocks, nameplates, wire duct, and other electrical components., • Cut, tag, route, and terminate wires according to project drawings and Panelmatic standards., • Inspect wiring and panel assemblies to ensure proper routing, labeling, termination, workmanship, and overall quality., • Troubleshoot wiring issues and assist technicians in resolving assembly and electrical discrepancies., • Identify drawing, material, or production issues and communicate them to the appropriate Supervisor or Engineering team., • Train and mentor Wiring Technicians on proper wiring techniques, tools, equipment, safety practices, and Panelmatic standards., • Provide hands-on assistance with complex or difficult wiring and panel assembly tasks., • Alter and cut steel, plastic, and other materials as required for panel fabrication and assembly., • Ensure work is completed in accordance with applicable safety requirements, quality standards, and project specifications., • Monitor progress and communicate project status, delays, material shortages, or other concerns to production leadership., • Help maintain an organized, clean, and safe work area., • Support testing, inspection, and final quality checks as needed., • Assist with onboarding and training new Wiring Technicians., • Promote teamwork, accountability, and a positive work environment., • Perform additional duties as needed to support project schedules, production goals, and overall department operations. Requirements • High school diploma or equivalent preferred., • 3+ years of experience in electrical panel wiring, electrical assembly, industrial wiring, or a related manufacturing environment., • Previous lead, senior technician, or informal leadership experience preferred., • Ability to read and interpret electrical schematics, wiring diagrams, engineering drawings, and assembly instructions., • Strong understanding of electrical panel assembly and wiring practices., • Experience using hand tools, power tools, wire strippers, crimpers, drills, and other electrical assembly equipment., • Ability to accurately measure, cut, route, label, and terminate electrical wiring., • Strong attention to detail and commitment to quality., • Ability to troubleshoot wiring and assembly issues., • Ability to communicate effectively with technicians, supervisors, engineering, and other departments., • Ability to provide direction, training, and support to less-experienced team members., • Ability to work independently while also functioning effectively as part of a team., • Ability to prioritize tasks and help keep projects on schedule. Benefits Benefits: • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid for by Panelmatic for the employee-only level medical coverage, • 80% paid for by Panelmatic and 20% paid for by the employee on all other level medical coverage (ie employee plus child, employee plus spouse, family), • 401K Retirement, • Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided, • PTO and paid holidays provided, • Career advancement opportunities, • Competitive wages, • Family-friendly environment with average employee tenure above five years

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic Inc. is seeking a dedicated and experienced Lead Industrial Electrician to provide hands-on leadership and technical direction within our electrical integration team. The Lead Industrial Electrician will lead and support a team responsible for the electrical installation, wiring, and integration of equipment within custom metal buildings and enclosures. This position will ensure electrical installations are completed safely, accurately, and in accordance with engineering drawings, customer specifications, Panelmatic standards, and applicable NEC codes. The Lead Industrial Electrician will coordinate daily work activities, provide technical guidance to team members, inspect completed work, troubleshoot issues, and help ensure projects remain on schedule. The Lead Industrial Electrician will remain hands-on in the installation and integration process while serving as a technical resource and leader for the team. Job Duties: • Provide day-to-day direction, guidance, and technical support to Electrical Integration Technicians., • Help coordinate daily assignments and prioritize work based on project schedules and production requirements., • Lead by example and maintain high standards for safety, quality, productivity, and workmanship., • Train, coach, and mentor team members on electrical installation practices, tools, equipment, and Panelmatic standards., • Assist with onboarding and training new employees., • Monitor team progress and communicate project status, delays, material shortages, or technical concerns to the appropriate Supervisor or Production Manager., • Help identify and resolve production issues that could impact project schedules or quality., • Work closely with Engineering, Production, Quality, and other departments to resolve installation and technical issues., • Provide hands-on assistance with complex electrical installations and difficult integration tasks., • Consult blueprints, work orders, schematics, one-line diagrams, and engineering drawings to safely construct and integrate electrical systems., • Interpret customer specifications and engineering requirements to determine proper installation methods., • Perform and oversee conduit bending, threading, and installation, including EMT, RGS, and RAL., • Design and install conduit systems within space restrictions in accordance with one-line diagrams, NEC requirements, and customer specifications., • Install electrical panels, breakers, fuses, disconnects, and related electrical equipment., • Install and terminate electrical wiring, outlets, switches, junction boxes, terminal boards, and wall boxes., • Install electrical systems including security systems, fire detection systems, UPS systems, and other building or equipment systems., • Install fiber optic cable, communication lines, power systems, and other electrical infrastructure as required., • Install electrical components in buildings, machinery, computers, equipment, and custom enclosures., • Install heating and cooling electrical systems in industrial buildings and enclosures., • Install cable tray and open wiring systems., • Install utility fixtures, outlets, terminal boards, switches, and wall boxes using appropriate hand and power tools., • Cut openings and drill holes for fixtures, outlet boxes, fuse holders, panels, and other electrical components., • Measure, cut, and install frameworks and supports for conduit, control panels, junction boxes, and other electrical devices., • Connect electrical systems to power sources in accordance with applicable electrical requirements., • Use mechanical, electrical, and hydraulic conduit benders to complete installations., • Ensure electrical systems are properly grounded and installed according to applicable NEC requirements., • Use test meters, meggers, and other diagnostic equipment to test and troubleshoot electrical systems., • Consult with engineers, engineering technicians, line installers, industrial machinery mechanics, and other technical personnel when required., • Identify installation discrepancies and communicate required corrections to the appropriate personnel., • Inspect completed electrical work to ensure installations meet drawings, specifications, Panelmatic standards, and applicable codes., • Verify wiring, conduit, equipment, and components are installed correctly before requesting inspection., • Notify the appropriate Lead, Supervisor, or Inspector when work is ready for inspection, as applicable., • Assist with troubleshooting and correcting inspection findings., • Maintain a clean, organized, and safe work area throughout the workday., • Ensure tools, equipment, materials, and work areas are properly maintained and returned to their designated locations., • Follow all company safety policies, procedures, and required PPE requirements., • Promote a culture of safety and accountability among team members., • Assist leadership in monitoring project progress and identifying potential schedule concerns., • Help ensure materials and components are available when needed to maintain production flow., • Review work completed by team members and provide guidance when corrections are needed., • Assist with final electrical assembly, testing, and preparation for customer inspection or shipment., • Perform additional duties as assigned to support project completion and overall production goals. Requirements • Industrial Electrical Certification preferred, • 4+ years of experience in industrial electrical installation, electrical integration, industrial construction, or a related field., • Forklift certification preferred, • Experience in RIE and PEC Building preferred, • Experience in Electrical Racks preferred, • Extensive knowledge and comprehension of NEC and UL codes preferred, • Extensive knowledge of conduit bending preferred, • High school diploma or equivalent required, • Three plus years of experience in industrial electrical in a manufacturing environment required, • Three plus years of experience in the use basic tools (squares, clamps, fillet gauge, angle grinder, conduit bender, etc.) required, • Knowledge of NEC codes and comprehension of general electrical standard required, • Three plus years of experience in applicable QAPs (Quality Assurance Procedures) required, • Excellent communication skills both written and verbal required, • Ability to convert decimals to fractions and utilize conversion charts required, • Ability to read a tape measure and prints required, • Ability to physically push, pull, and lift 50lbs or more required, • Ability to stoop and bend required, • Ability to sit, stand, and walk for four plus hours at a time required, • Excellent color vision and eyesight required, • Alignment with company core values required Benefits • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid by Panelmatic for employee-only coverage, • 80% Panelmatic-paid / 20% employee-paid dependent coverage, • 401(k) contributions matched 100% up to 4%, • Scholarships, educational reimbursement, paid volunteerism, and professional development, • PTO and paid holidays, • Career advancement opportunities, • Competitive wages, • Family-friendly environment with average employee tenure above five years

Job DescriptionJourneyman ElectricianDirect Hire Starting at $38.00/hr Shifts: MUST be able to work OT & Weekends 1st shift 6am -2pm 2nd shift 2pm-10pm 3rd shift 10pm-6am MUST HAVE JOURNEYMAN LICENSE Multiple Openings- Resumes to AlexR@tpistaffing.com The Maintenance Electrician is responsible for corrective, predictive, preventative and installation work related to electrical equipment and electronic controls. Key Responsibilities: • Perform routine electrical equipment service, setup, adjustment and repairs/modifications on plant equipment and facility., • Install, maintain, calibrate, and/or repair and electrical and electronic equipment including, but not limited to: power distribution, motor control, programmable control systems., • Perform predictive & preventative tasks associated with equipment., • Identify and correct defects in equipment during maintenance checks., • Hydraulic knowledge a plus, • Ability to work at heights., • Other duties as assigned Basic Qualifications: • Journeyman License., • Technical training, • 5 years of experience, • Proficient at using hand tools, portable electric tools & typical shop stationary equipment, • A strong commitment to working effectively in a team environment, • Ability to work in a manufacturing atmosphere safely and follow safety practices and regulations, • Ability to work with no supervision or in a team to complete work on time, • Ability to work with operations to repair or solve issues, • Ability to work at heights, in pits and confined spaces, • Ability to work overtime when required Preferred Qualifications: • PLC experience such as troubleshooting and programming, • Mechanical Aptitude, • Computer literate to plan work, identify parts and learn the computerized maintenance system for offering job materials or writing work orders

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic Inc. is seeking a dedicated and skilled Electrical integration associate. The Industrial Electrician is responsible for the installation of various electrical equipment used in buildings and enclosures, which meet dimensional requirements and NEC codes. Set up and align parts per shop prints in preparation for installation and perform electrical wiring operations, utilities, fire alarm systems, power supply systems, etc. and final electrical assembly. Working either individually, or as part of a small team to produce metal buildings and enclosures. Job Duties: • Consults blueprints, work orders, and/or schematics to safely construct specified structure; develops additional sketches if needed., • Conduit bending, threading and installation including EMT, RGS and RAL., • Installing electrical panels, breakers, fuses and ensuring that the electrical system is properly grounded., • Installing electrical wiring, wire, outlets, switches, junction boxes., • Installing electrical systems such as security systems, fire detection system, and UPS systems, • Installing fiber optic cable lines, communication lines, and power systems, • Installing electrical components in new buildings, machinery, computers, or other equipment, • Installing heating and cooling systems in industrial buildings, • Installing cable tray, and open wiring systems, • Install utility fixtures, outlets, terminal boards, switches, and wall boxes, using hand tools., • Cut openings and drill holes for fixtures, outlet boxes, and fuse holders, using electric drills and routers., • Measure, cut, and install frameworks to support conduit, control panels, junction boxes, and other devices using hand tools., • Reading technical diagrams and blueprints., • Design and installation of conduit to fit required space restrictions using 1-line diagrams per NEC codes and customer specifications., • Connects electrical systems to powerlines to provide electricity to the building., • General knowledge of electrical systems, wiring and NEC codes, • Using mechanical, electrical, and hydraulic benders., • Proficient in the use of test meters, meggers, and other diagnostic equipment., • Consult with engineers, engineering technicians, line installers and repairers, or industrial machinery mechanics and maintenance workers when performing installations., • Notify the lead person or Inspector when the product is ready for inspection., • Maintains a clean and safe work area each day and returns tools to their proper locations., • Performs other related duties as assigned. Requirements • Industrial Electrical Certification preferred, • Forklift certification preferred, • Experience in RIE and PEC Building preferred, • Experience in Electrical Racks preferred, • Extensive knowledge and comprehension of NEC and UL codes preferred, • Extensive knowledge of conduit bending preferred, • High school diploma or equivalent required, • Three plus years of experience in industrial electrical in a manufacturing environment required, • Three plus years of experience in the use basic tools (squares, clamps, fillet gauge, angle grinder, conduit bender, etc.) required, • Knowledge of NEC codes and comprehension of general electrical standard required, • Three plus years of experience in applicable QAPs (Quality Assurance Procedures) required, • Excellent communication skills both written and verbal required, • Ability to convert decimals to fractions and utilize conversion charts required, • Ability to read a tape measure and prints required, • Ability to physically push, pull, and lift 50lbs or more required, • Ability to stoop and bend required, • Ability to sit, stand, and walk for four plus hours at a time required, • Excellent color vision and eyesight required, • Alignment with company core values required Benefits • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid by Panelmatic for employee-only coverage, • 80% Panelmatic-paid / 20% employee-paid dependent coverage, • 401(k) contributions matched 100% up to 4%, • Scholarships, educational reimbursement, paid volunteerism, and professional development, • PTO and paid holidays, • Career advancement opportunities, • Competitive wages, • Family-friendly environment with average employee tenure above five years

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic, Inc. is seeking a dependable and motivated Industrial Electrician Helper to assist Industrial Electricians with the installation, assembly, and wiring of electrical equipment within industrial buildings, metal structures, and electrical enclosures. This entry-level position is ideal for someone interested in developing a career in industrial electrical work. The Industrial Electrician Helper will support daily production activities by preparing materials, organizing tools, assisting with conduit installation, and helping electricians complete electrical assemblies according to shop drawings, project specifications, and safety requirements. The ideal candidate has a strong work ethic, a willingness to learn, good attention to detail, and the ability to work independently or as part of a team in a manufacturing environment. Job Duties and Responsibilities • Assist Industrial Electricians with electrical installation, wiring, and assembly tasks., • Read and follow basic shop drawings, blueprints, work orders, and instructions with guidance from experienced electricians., • Gather, organize, and prepare materials, tools, and equipment needed for assigned jobs., • Assist with measuring, cutting, drilling, and preparing materials for electrical installations., • Help install conduit, cable trays, junction boxes, electrical panels, outlets, switches, and other electrical components., • Assist with conduit bending, threading, and installation under the direction of qualified personnel., • Support wire pulling, cable routing, wire labeling, and basic wiring preparation., • Help mount electrical components, terminal boards, control panels, and supporting frameworks., • Use hand tools, power tools, drills, and other shop equipment safely and appropriately., • Assist with installing electrical components in metal buildings, enclosures, and industrial control panels., • Maintain an organized work area and return tools and materials to their designated locations., • Follow all company safety procedures, including the proper use of personal protective equipment (PPE)., • Identify and report damaged materials, unsafe conditions, or potential quality concerns to the lead electrician or supervisor., • Assist with preparing completed work for inspection and help correct deficiencies as directed., • Perform other related duties as assigned. Requirements • High school diploma or GED preferred., • Previous experience in manufacturing, construction, electrical work, or a related hands-on field is preferred but not required., • ]Basic familiarity with hand tools and power tools is a plus., • Ability to read measurements and follow written and verbal instructions., • Willingness to learn electrical terminology, wiring practices, conduit installation, and basic electrical safety., • Strong attention to detail and commitment to producing quality work., • Reliable attendance, punctuality, and a positive attitude., • Ability to work effectively with electricians, supervisors, and other production team members., • Ability to follow safety procedures and work in a fast-paced manufacturing environment. Benefits • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid by Panelmatic for employee-only coverage, • 80% Panelmatic-paid / 20% employee-paid dependent coverage, • 401(k) contributions matched 100% up to 4%, • Scholarships, educational reimbursement, paid volunteerism, and professional development, • PTO and paid holidays, • Career advancement opportunities, • Competitive wages, • Family-friendly environment with average employee tenure above five years

_ The STOCK YARDS STORY We’ve been providing chefs with expertly cut and portioned beef and pork for over 120 years, based on rigid meat-selection criteria, precise beef aging and expert trimming. Whatever your need, from white-linen presentation to casual family dining, our procurement experts will find the best-quality options that work for your budget and pack-size needs, carefully selected from our extensive meat assortment. Prepare high quality cuts of meats according to customer specifications using company standards and adhering to all safety requirements. 1st shift schedule: Monday - Friday 9:00 am - 5:30 pm (OT) Hablamos Español! Houston, TX Stock Yards Facility ESSENTIAL DUTIES AND RESPONSIBILITIES Trim fat and skin from meat and customize portions of products using knives, or other meat production equipment. Count and stack on tray portions per customer and company specifications. Label portion with supplied number product labels. Set up cutting room as required. Keep cutting room and surrounding area clean and sanitized. Follow company GMP (Good Manufacturing Practices) to maintain sanitary conditions. Work standing continually in a refrigerated environment 35°F- 45°F. Other duties as assigned by Manager. SUPERVISION: The incumbent is not required to provide direct supervision of any position. RELATIONSHIPS Internal: The incumbent is required to interact with employees at all levels of responsibility throughout the company. External: N/A WORK ENVIRONMENT Work continually in refrigerated environment 35F- 45Fdegrees. Must be able to work for periods of time in freezer 10F to - 10F degrees. MINIMUM QUALIFICATIONS Kitchen prep experience and some basic knife skills preferred; minimum of 6 months experience as a trimmer preferred. Experience with laser portion machinery or other meat production equipment preferred. 6 months in production, manufacturing or meat trimming experience required. CERTIFICATIONS/TRAINING Knowledge of poultry, beef, lamb, and pork products Knowledge of USDA grades and standards. LICENSES N/A EDUCATION N/A PHYSICAL QUALIFICATIONS OCCASIONALLY: 1% - 33 / FREQUENTLY: 34% - 66% / CONTINUOUSLY: 67% - 100% or NEVER JOB REQUIRES WORKER TO: FREQUENCY: STAND CONTINUOUSLYWALK OCCASIONALLYDRIVE VEHICLE N/ASIT OCCASIONALLYLIFT 1-10 lbs (Sedentary) OCCASIONALLY11-20 lbs (Light) FREQUENTLY21-50 lbs (Medium) FREQUENTLY51-100 lbs (Heavy) OCCASIONALLYOver 100 lbs (Very Heavy) N/ACARRY 1-10 lbs (Sedentary) OCCASIONALLY11-20 lbs (Light) OCCASIONALLY21-50 lbs (Medium) FREQUENTLY51-100 lbs (Heavy) OCCASIONALLYOver 100 lbs (Very Heavy) OCCASIONALLYPUSH/PULL1 FREQUENTLYCLIMB/BALANCE2 FREQUENTLYSTOOP/SQUAT FREQUENTLYKNEEL FREQUENTLYBEND FREQUENTLYREACH ABOVE SHOULDER OCCASIONALLYTWIST FREQUENTLYGRASP OBJECTS3 CONTINUOUSLYMANIPULATE OBJECTS4 FREQUENTLYMANUAL DEXTERITY5 FREQUENTLY" Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law (for example: state minimum wage thresholds). The expected base rate for this role is between $17.00 and $19.00 hr. As applicable, This role may also receive overtime compensation. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: _. *EOE – Race/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Age/Genetic Information/Protected Veteran/Disability Status*

_ THE STOCK YARDS STORY We’ve been providing chefs with expertly cut and portioned beef and pork for over 120 years, based on rigid meat-selection criteria, precise beef aging and expert trimming. Whatever your need, from white-linen presentation to casual family dining, our procurement experts will find the best-quality options that work for your budget and pack-size needs, carefully selected from our extensive meat assortment. Responsible for upkeep and maintenance of production/facility equipment. Work on other assignments as designated by management. Maintain proper Hazmat documentation. Ensure preventive maintenance is fulfilled per schedules. Meat Production Maintenance Technician 1st shift Houston, TX Stock Yards location Hablamos Español! Schedule: Monday - Friday 8:00 am - 4:30 pm and Saturdays as needed. OT ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform necessary repairs and maintenance to all production/facility equipment to insure that adequate machinery is available for day and night operations. Review any equipment reports submitted by associates, record actions/repairs taken, and maintains a repair log per USF policy. Complete all applicable documentation for equipment related activities (assembly forms, disassembly forms, etc.). Perform PM’s (Preventative Maintenance) on equipment, and maintain PM log with proper documentation, per USF policy. Comply with all USF and government guidelines regarding safety when working on equipment (i.e. Lock Out/Tag Out, placarding and required documentation, safe work environment, etc.) Maintain and secure the battery-charging area, batteries and other equipment contained therein. Responsible for company tools, replacement parts and maintenance equipment used in performance of job duties, including inventory maintenance, safe operation, proper storage, and security of tool area. If authorized, may purchase tools and other equipment needs from local vendors to perform required duties. SUPERVISION RELATIONSHIPS Internal: Warehouse and production personnel and supervisory staff, Operations support, Maintenance and Sanitation personnel External: Outside vendors QUALIFICATIONS Education/Training: High School education or equivalent preferred; additional mechanic training or trade school degree preferred. Related Experience: A minimum of six months previous mechanic experience required. Knowledge/Skills/Abilities: Knowledge of equipment repair and operation; able to repair and overhaul warehouse & production equipment; welding ability; able to read and write legibly; able to follow orders; basic mathematical skills (add, subtract, multiply, divide); able to work with little direct supervision Physical Requirements: JOB REQUIRES WORKER TO: 1. SIT Occasionally, 2. STAND Frequently, 3. WALK Frequently, 4. DRIVE Occasionally (Test drives equipment) JOB REQUIRES WORKER TO LIFT: 1. 1-10 lbs (Sedentary) Continuously, 2. 10-20 lbs (Light) Frequently, 3. 25-50 lbs (Medium) Occasionally, 4. 50-100 lbs (Heavy) Occasionally, 5. Over 100 lbs (Very Heavy) Never JOB REQUIRES WORKER TO CARRY: 1. 1-10 lbs (Sedentary) Frequently, 2. 10-20 lbs (Light) Frequently, 3. 25-50 lbs (Medium) Occasionally, 4. 50-100 lbs (Heavy) Occasionally, 5. Over 100 lbs (Very Heavy) Never JOB REQUIRES WORKER TO: 1. Push/pull Occasionally e.g.: Boxes, pallet jack control arm, hand tools, drive units 1. Climb/balance Occasionally e.g.: equipment Pallet Jack, fork lift, order selector 1. Stoop/squat Frequently, 2. Kneel/bend Occasionally, 3. Bend Frequently, 4. Reach above shoulder Occasionally, 5. Grasp objects Frequently, 6. Manipulate objects Frequently, 7. Twisting Occasionally Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law (for example: state minimum wage thresholds). The expected base rate for this role is between $22.00 - $30.00 As applicable, this role may also receive overtime compensation. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: _. *EOE – Race/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Age/Genetic Information/Protected Veteran/Disability Status*

Job Description Finishing Operator | $18-$19 an hour | 1st Shift Monday through Friday 7am to 5pm What Matters Most • Competitive pay rate of $18 to $19 an hour based on experience, • Schedule: Monday through Friday 7am to 5pm, • Location: South Houston, • Temporary-to-hire opportunity with career growth and stability, • Weekly Pay with direct deposit or pay card, • When you work through The Reserves Network, you are eligible to enroll in dental, vision and medical insurance as well as 401K, direct deposit and our referral bonus program Job Description We are seeking a skilled Finishing Operator to assist in threading, grooving, and beveling pipes. You’ll be part of a dynamic team in a supportive environment where your expertise will be valued and your career growth encouraged. If you have a passion for precision and innovation, apply today to take the next step in your career. Responsibilities:, • Machine operation “groover” machine, • Grooving pipe for 8 hours, • Runs pipe through machine – pipe is either 20’ or 40’ in length, • Pipe is fed into machine from a nearby rackQualifications and Requirements:, • High School Diploma or GED required., • Experience in threading, grooving or beveling material., • Capable of being trained on thread specification and use proper QC tooling, • Ability to work overtime as needed., • Capable of regularly lifting and moving objects up to 50 lbs., • Must pass pre-employment screenings. Benefits and Perks:, • Competitive Salary: $18 to $19 an hour - Enjoy a competitive wage that reflects your skills and experience with potential for performance-based bonuses, • Comprehensive health, dental, and vision insurance., • Generous paid time off (PTO) and paid holidays., • 401(k) retirement plan with company match., • Opportunities for career advancement and professional development., • Supportive and inclusive work environment., • Employee wellness programs and resources., • Discounts on company products and services. Your New Organization: Join a dynamic and growing leader in the pipe supply industry where your skills and contributions are highly valued. Company offers a competitive salary, comprehensive benefits, and ample opportunities for career advancement in a supportive work environment. Their commitment to employee development and a positive workplace culture makes this a great place to build your career. Discover your future with a company dedicated to excellence and growth. Your Career Partner: The Reserves Network, a veteran-founded and family-owned company, specializes in connecting exceptional talent with rewarding opportunities. With extensive industry experience, we are dedicated to helping you achieve your professional goals and shine in your field. The Reserves Network values diversity and encourages applicants from all backgrounds to apply. As an equal-opportunity employer, we foster an environment of respect, integrity, and trust in every aspect of employment. In the spirit of pay transparency, we want to share the base salary range for this position is $18 to $19 an hour, not including benefits, potential bonuses or additional compensation. If you are hired, your base salary will be determined based on factors such as individual skills, qualifications, experience, and geographic location. In addition, we also believe in the importance of pay equity and consider the internal equity of our current team members as a part of any final offer. Please keep in mind that the range mentioned above is the full base salary range for the role. Hiring at the maximum of the range would not be typical to allow for future & continued salary growth

Job Description Embellishment Trimmer | $17.00/Hour | 1st Shift | Seasonal Associate What Matters Most • Competitive pay of $17.00 per hour, • Schedule: 1st Shift, 6:00 AM – 2:30 PM, • Location: Houston, Texas, • Direct Hire opportunity with career growth and stability, • Weekly pay with direct deposit or pay card, • When you work through The Reserves Network, you are eligible to enroll in dental, vision and medical insurance as well as 401K, direct deposit and our referral bonus programJob Description The Trimmer supports the delivery of high-quality, customer-ready garments by completing the final stage of the embroidery process. This position removes embroidery backing, trims loose threads, and neatly folds finished garments to ensure each item meets quality standards. The Trimmer also inspects completed garments for accuracy and imperfections before preparing orders for shipment. Responsibilities:, • Trim embroidery backing and remove loose threads and lint from finished garments., • Fold, organize, and inspect completed embroidered items against pick tickets and logo worksheets., • Check garments for stains, holes, or other imperfections and communicate issues to the supervisor or team., • Pack completed orders into the proper bins and transport them to Shipping or other Embellishments departments as directed., • Meet or exceed established production standards while maintaining quality and accuracy.Qualifications and Requirements:, • High school diploma or equivalent preferred., • Knowledge of fabrics and their characteristics is preferred but not required., • Excellent attention to detail and ability to maintain quality standards., • Ability to work effectively and professionally with team members., • Ability to lift approximately 20 pounds without assistance., • Ability to stand for extended periods and work in a physically active environment.Benefits and Perks:, • $17.00 per hour, • Medical, dental, and vision benefits, • 401(k), • Weekly pay with direct deposit or pay card, • Referral bonus program, • Career growth and training opportunitiesYour New Organization: Our client is a professional garment embellishment organization focused on producing high-quality, customer-ready apparel. This position works in a pleasant, temperature-controlled environment as part of a team that values quality, accuracy, productivity, and teamwork. Your Career Partner: The Reserves Network, a veteran-founded and family-owned company, specializes in connecting exceptional talent with rewarding opportunities. With extensive industry experience, we are dedicated to helping you achieve your professional goals and shine in your field. The Reserves Network values diversity and encourages applicants from all backgrounds to apply. As an equal-opportunity employer, we foster an environment of respect, integrity, and trust in every aspect of employment. The base pay range for this position is $17.00 per hour, excluding benefits, bonuses, or other compensation. Your final compensation will depend on your skills, qualifications, experience, location, and internal pay equity. Please note, hiring at the top of the range is uncommon to allow room for future growth.

Job Description Job Title: Machine Operator Location: Houston, TX, 77054 Duration: 12 Months Pay rate: $20/hr - $25/hr on W2 without benefits Shift: 1st shift - 4AM to 12PM Summary: • The Honing Operator is responsible for operating horizontal honing machines to produce precision components that meet dimensional, geometric, and surface finish requirements., • The role includes loading and unloading parts using overhead cranes, performing inspections, maintaining equipment, and supporting other machining and finishing operations as needed., • The ideal candidate demonstrates flexibility and a willingness to cross-train and operate similar manufacturing equipment, including gun drilling and deburring processes. Required Qualifications • 5 years of honing machine operation experience preferred., • Direct experience operating horizontal honing machines., • Ability to read and interpret engineering drawings and specifications., • Strong understanding of precision measurements, tolerances, and surface finish requirements., • Experience working with complex, high-value machined components. Preferred Qualifications • Experience operating the specific machine brands referenced in the requisition., • Experience with overhead crane operation., • Forklift experience/certification is a plus but not required., • Additional machine shop experience or operation of other machining equipment., • Resumes should clearly indicate:, • Years of honing experience., • Types of honing machines used., • Horizontal vs. vertical honing experience., • Types of parts machined., • Surface finishes and tolerances achieved., • Other machining skills and equipment operated. Top Skills • Horizontal honing machine operation., • Precision measurement and inspection., • Ability to maintain tight tolerances and surface finish requirements., • Blueprint/engineering drawing interpretation., • Overhead crane experience Key Responsibilities • Operate horizontal honing machines (Sunnen or similar machines) to perform precision honing operations., • Safely load and unload workpieces using overhead cranes and appropriate lifting devices., • Inspect lifting equipment prior to use and follow safe rigging and crane operating procedures., • Set up honing tools, stones, mandrels, fixtures, and machine parameters according to work instructions., • Monitor machining processes and make adjustments to achieve required bore size, geometry, and surface finish., • Read and interpret engineering drawings, specifications, and work instructions., • Perform in-process and final inspections using bore gauges, micrometers, calipers, and other precision measuring instruments., • Record inspection results and production data as required., • Conduct routine machine cleaning, lubrication, and preventive maintenance activities., • Identify and report equipment malfunctions, tooling issues, or quality concerns., • Maintain a clean and organized work area in accordance with 5S and safety requirements., • Comply with all company safety, quality, and environmental procedures.

Job Description Connect Staffing is hiring a Tuflex Operator for an industrial lifting sling manufacturer in Houston, TX. This is a temp-to-hire position paying $17.25–$18.25/hr. In this role, you will set up and operate industrial sewing machines to produce Tuflex round slings according to manufacturing specifications and quality standards. This is a long-term opportunity with a well-established manufacturer of industrial rigging products. Pay: 1st shift $17.25– 2nd Shift $18.25/hr Location: Houston, TX Job Type: Temp-to-Hire Primary workplace language(s): English Work Environment: Manufacturing Plant / Factory Responsibilities • Set up, adjust, and operate industrial sewing machines to produce Tuflex round slings to spec., • Select appropriate raw materials, hardware, tools, tags, and equipment for each production run., • Read and interpret production sheets, manufacturing manuals, and related documents., • Identify and report equipment malfunctions, operational issues, or material deficiencies., • Perform preventative maintenance tasks on machines and equipment and report maintenance needs., • Move and handle materials throughout the production area as required. Minimum Requirements • 1+ year of experience operating sewing machines or production equipment in a manufacturing environment. Preferred Qualifications • Experience in lifting sling, rigging, webbing, or textile manufacturing., • Familiarity with industrial sewing machine setup and adjustment., • Experience selecting raw materials or components from manufacturing specs., • Ability to perform basic preventative maintenance on production equipment., • Experience tracking inventory or completing production reports and forms., • Ability to read and follow production sheets, work instructions, and manufacturing manuals., • You may be a great fit if you've held any of these titles: Sewing Machine Operator, Industrial Sewing Operator, Tuflex Operator, Round Sling Assembler, Production Operator, Textile Operator, Webbing Operator, Machine Operator, Rigging Assembler, Manufacturing Production Worker. Pre-Employment Requirements • Drug screen required., • Background check required., • Work authorization required (E-Verify)., • Must communicate effectively in English., • Ability to work at a fast pace in a manufacturing environment., • Steel toe boots required (employee-provided). Benefits • Weekly pay., • Direct deposit / Paycard., • Health and dental benefits available., • Earn referral bonuses. After you apply, please check your email for a short screening questionnaire from us. Candidates who complete it promptly will be reviewed faster. See all our current openings at jobs.connectstaffing.com #CONHP

Job DescriptionDescription: JACQUET is an established market leader in the distribution of stainless steel and nickel alloys in plate and round bar. Jacquet strives to be the best supplier of stainless steel and nickel cut parts by providing high quality in-house processing. Metals are sold either as-is or cut to made-to-measure sizes using plasma machines, water jets, lasers or saws. Jacquet applications cover many industrial sectors such as the water, environment, energy, mechanical and forged metal construction, chemical and agri-food, gas processing and storage, pharmaceutical and cosmetic sectors. We have four strategically placed locations within the US including Pennsylvania, California, Texas, and Wisconsin with many more globally. We are currently seeking experienced Machine Operators for 3rd shift at our Houston, TX facility. The hours are Monday-Friday 10:00pm-6:30am (will train on 1st shift for the first month). Multiple positions are available and include; Laser, Waterjet, and Saw Operators. We offer training, competitive pay, and a comprehensive benefits package. If you have the necessary skills and qualifications, we would enjoy the opportunity to speak with you! Description: The machine operator is responsible for the safe operation, maintenance, and cutting of stainless steel and nickel alloys per customer specifications on the Laser, Water Jet, or Saw machine. Responsibilities: • Take primary responsibility for operation and maintenance of the machine to include Production, Quality, accuracy of Production Logs, and BT/Travelers/Programs., • Perform daily, weekly, and monthly maintenance as needed., • Assist maintenance whenever requested or directed., • Monitor your machines’ consumables. Cut and remove scrap. Report any deficiencies., • Use plates, bars, rems, and programs as specified by Production Control. Prior approval for any changes., • Work with QA department on all matters of quality to include quality of cut parts, cutting tolerances, quality statistics and ISO 9000 certification., • Ensure that safe work practices are maintained always within your work section and always adhere to safety requirements and wear required protective equipment., • Control the neat, orderly and accurate storage of all bar inventory in the plant., • Organize the work area of your machines. All tools should be put away in an orderly manner., • Maintain and constantly improve upon the cleanliness of your section., • Perform other reasonable tasks as requested by the Operations Manager or the floor supervisor. Requirements: • Minimum 18 years, • High School Diploma or Equivalent, • Ability to read and write English, • Ability to stand, sit, bend, stoop, and reach, • Ability to lift 50 lbs. Other Skills: • Attention to detail, • Team player, • Basic familiarity with computers/software programs Experience: • 1+ years prior experience with machine operations, • 1+ year(s) prior experience operating an overhead crane, • 1+ year(s) prior experience operating a forklift Pay Range: commensurate with experience Requirements:

Job Description Service Wire Company, a premier supplier of industrial and utility wire and cable, is currently seeking a Machine Operator Trainee in Houston, TX. If you are looking to join a great organization and a chance to become a part of our growing team, this may be the opportunity for you! Position Summary: Our Machine Operator Trainees perform preparation setup of production machine(s). They also operate manufacturing machinery, monitor wire quality, and record fabrication data to ensure defect-free products as defined by industry regulations and customer specifications. Additionally, they transport wire and materials throughout facility on a forklift. Tasks/Duties/Responsibilities: • Prepare and setup machines for production by positioning the payoff, feeder, and take-up, • Operate the machinery by adjusting and maintaining production controls according to specifications, • Monitor the quality of wire during production and the finished product, • Perform routine lubrication of machinery parts and minor preventative maintenance, • Observe machine operation for equipment malfunction and report immediately, • Record detailed daily production data, • Maintain safety standards and clean work environment, • Additional duties as assigned by supervisorKnowledge/Skills/Requirements:, • High School Diploma/GED (General Equivalency Diploma) or one year related industrial experience or equivalent training, • Demonstrate strong basic math and measuring skills, • Ability to read, comprehend, and respond to general instructions, direction, and correspondence, both oral and written, • Cooperatively works and interacts with members of the manufacturing department and other company employees, • Must be able to work in hot and cold environments without climate-control., • In-person attendance is an essential function of the jobSchedule: Must be available to work the following times: - 1st Shift - 7am - 3:30pm, • 2nd Shift - 3pm - 11:30pm, • 3rd Shift - 11pm - 7:30amThe perks of joining our Team:, • Comprehensive Insurance Options - Competitive medical coverage with a variety of plan choices, • Progressive PTO & Paid Holidays - Tenure-based paid time off plus eight paid holidays annually, • Predictable, set schedules that support work-life balance - no rotating shifts, • 401(k) with Company Match + Profit Sharing - Matching 5% on 6% of employee contributions and annual profit‑sharing contributions, • Career Growth & Learning Support - Tuition reimbursement and employee assistance programs, • Tuition reimbursement up to $15,000 - annually to support your continued education and career growth, • Annual bonus potential up to $3,000 - through performance incentive programs, • Referral Bonus Program - Employee referral bonuses paid out over the new hire's first year, • See all benefits we offer here

Job Description Reports to: Painting Supervisor Primary Responsibility: Support MIRATECH customers with work in our service center and warehouse. Operating equipment and support product creation and order fulfillment. Schedule: Monday - Friday 6am to 3pm Specific Duties and Responsibilities: • General Labor, • Setting up painting equipment, • Overseeing training of new or Junior Machine Operators, • Using machine equipment to complete tasks, • Evaluating the efficiency of each unit regularly, identifying improvements as needed, • Other duties as assigned. Qualifications: • Preferably 2 + years of general warehouse experience and operating manufacturing equipment, • Must be able to lift up to 75 lbs. individually and heavier items with team lift., • Forklift, crane, shear, and/or roller operation experience., • Knowledge of safe workplace practices., • Ability to make independent decisions., • Attention to detail., • Organizational and time management skills. Physical Requirements: • Ability to lift up to 50 pounds., • Standing, bending, and walking for extended periods of time Benefits and Perks: • Health, Dental & Vision Insurance, • Annual Bonus Program, • $350 Annual Wellness Credit, • Flexible Spending Account (FSA), • 401k with match up to 5%, • Life insurance, • Disability insurance, • 5 days of paid sick leave annually (prorated based on start date), • 15 days PTO annually (prorated based on start date) Equal Opportunity: MIRATECH is an equal opportunity employer and supports a diverse and inclusive workforce. All employment practices are based on qualification and merit, without regards to race, color, national origin, ancestry, religion, age, sex, gender identity, sexual orientation or preference, marital status or spousal affiliation, physical or mental disability, medical conditions, pregnancy, status as a protected veteran, genetic information, or citizenship within the limits imposed by federal laws and regulations Job Posted by ApplicantPro

Job Description As a machine operator you are responsible for loading and unloading parts and material to and from our machines, inspecting parts, packing, labeling, house keeping and more in this position. Responsibilities (Include but are not limited to): • Operate assigned machinery throughout shift, • Maintain product creation within designated cycle time at all times, • Communicate with leads and/or supervisors of any discrepancies or assistance needed, • Package finished product according to instruction; assure finished product meets quality and specifications, • Correct/separate good/bad products consistently, • Assemble finished product, if needed, • Promote and exercise safety by using Personal Protective Equipment (PPE) and follow all safety policies and procedures while in the plant, • Maintain cleanliness of area around assigned machine by picking up trash, sweeping, vacuuming, etc., • Assemble boxes to be used during shift and/or next shift, • Follow all health and safety regulations, • Assist cell leads in relieving operators for breaks, • Occasionally train new operators on assigned machines, as needed Requirements: • Bilingual (English & Spanish) is a plus, • Experience in working in production setting a plus, but not required (training provided), • Must be able to lift 50 lbs. or more, • Must be able to sit and/or stand for the entire shift, • Must be 18 years of age or older, • Must have your own reliable transportation, • Must be authorized to work in the United States, • Must be flexible and able to work extended shifts and/or weekends Schedule: • Monday - Friday, 6:45am - 03:15pm (May have to work extended hours and/or weekends as needed) Compensation: • $16.50/hour Physical Demands: The description below is intended to describe the general content and requirements for the performance of this job but is not limited to: • While performing the duties of the job, the employee may be required to stand; walk; sit; use hands to finger, handle or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop, kneel, crouch or crawl; talk or hear; taste or smell., • The employee must be able to lift and/or move up to 50lbs., • Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Some duties may be removed at any time and new duties may be added as GTI continues to grow. If and as required under federal or state law, upon request, reasonable accommodations which do not create an undue hardship will be considered, discussed, offered and implemented (if accepted) to enable persons with defined disabilities to overcome barriers to the performance of essential functions of the position. Job Posted by ApplicantPro

Job Description Responsibilities Maintains clean, safe work areas and minimizes material spillage Strives to achieve all production and quality goals. Assists maintenance when directed by Shift Leader. Communicates with all employees, particularly those from a proceeding/following shift to ensure everyone understands the status of products, equipment, quality, etc. Follows all Company policies, practices, and procedures. Immediately alerts Shift Leader when a problem (equipment, product, personnel issue) is encountered. Empties process dust collectors, dust collectors and central vacuum systems and ensure area stays in compliance with environmental permits Cleans equipment between products to ensure there is no cross contamination from product to product. Quals-- 1ST SHIFT - 7AM - 3PM This position is responsible for working in at least one (1) production area to ensure customer requirements are met. This person will also follow all safety procedures and assist fellow co-workers as needed. This person will work with moderate supervision and will receive most directions from the Shift Leader or Supervisor. ESSENTIAL DUTIES AND RESPONSIBILITIES will include the following: Additional duties are described in the Quality System Procedures Manual, Work Instructions, and/or Job Training Checklist as applicable. Other duties may be assigned as required to fulfill the objectives of the department and the Company. Scope General cleaning removing all the debris and powder that has built up around the processing machines, floor and on items around the facility Removing discarded material from the internal floor drains so the washdown water can flow properly in the drains Using pneumatic air tools to chisel years of built-up paint and resins that has built up over the years Cleaning of the machines i.e., grime using solvent cleaners and scrapers and power tools to prep ready for painting again challenging in this climate Painting of machines using rollers and brushes etc., also floor markings to be carried and supporting the 5S process with housekeeping activities Changing of Filters to ensure proper air flow to dust collector and air handling units. Here are the Basic Skills Required: Knowledge of basic safety practices and proper PPE usage Ability to follow work instructions, procedures, and supervisor direction (Read in English) Basic understanding of production processes and equipment operation Ability to maintain clean and organized work areas (5S/housekeeping) Willingness to perform physically demanding tasks (cleaning, scraping, lifting) Basic mechanical aptitude and ability to use hand and power tools Ability to identify and report equipment, product, or safety issues Effective communication skills, especially during shift handovers (Speak and understand English) Teamwork mindset and willingness to assist co-workers and maintenance Ability to work with moderate supervision and stay on task Awareness of environmental requirements (dust control, waste handling) Basic problem recognition and escalation skills Reliability, accountability, and adherence to company policies Must be able to lift 55lbs Forklift experience is preferred

Job DescriptionDescription: Are you ready to make an impact? Are you ready to be a part of a stable and growing organization perfect to grow yourself and your career? Then read on: At Trace-A-Matic we believe the people are our biggest assets! We provide a friendly, clean and safe work environment for all to grow and thrive! Our core focus is to achieve excellence in complex precision machined components and customer satisfaction. We also offer Gainsharing! So, if the company makes a profit, they split it 50/50 with the employees, which gets paid out on a quarterly basis! Trace-A-Matic Offers: • Health, • Dental, • Vision, • 401K, • Gain Sharing, • Tuition Reimbursement, • 10 paid holidays, • Service Based PTO, • Tuition Reimbursement, • Safety Shoe and Safety Glasses Reimbursement Trace-A-Matic is hiring 1st Shift and 2nd Shift CNC Mill Machinists, see below: CNC Machinist Job Overview: You would perform set up, operation, and programming of complex machined components for many different industries on CNC Mills including Horizontal Boring Mills and Vertical Mills. Responsibilities & Duties • Ability to set up all repeat jobs that are fully documented, • Run the first piece to print specification, • Knowledge of programming and may have ability to make edits or program., • Manually inspect the part to the inspection sheet criteria, • Ability to read blueprints to a medium/high level and correlate that back to the inspection protocol and documentation, • Knowledge of GD&T tolerancing, • May run multiple machines simultaneously as a production cell, • Advanced shop math with trigonometry and geometry, • Mentor and train operators, • Other duties as neededRequirements: Qualifications: • High School Diploma/ CNC technical diploma preferred, • 5+ years of Machining experience, • Individuals should show intelligence, mechanical interest/aptitude, good math skills and most importantly willingness to learn. Type: CNC Machinist, Full Time, 1st Shift (6am to 6pm) and 2nd Shift (6pm to 6am) Company: Trace-A-Matic Location: Houston, TX Salary Description: $26.00 - $33.00/hour Trace-A-Matic is an Equal Opportunity Employer. EOE/M/F/D/V.

Job Description Service Wire Company, a premier supplier of industrial and utility wire and cable, is currently seeking Entry Level Manufacturing and Distribution workers in Houston, TX. If you are looking to join a great organization and a chance to become a part of our growing team, this may be the opportunity for you! No experience required- we provide full training! Position Summary: Our Entry Level workers process material cuts according to customer specifications, record distribution data in order to expedite and prepare orders for shipment. They also work to maintain inventory stock and an organized warehouse, and transport wire and materials throughout the facility using a forklift. Tasks/Duties/Responsibilities: • Cut wire to specified length based on customer requirements, • Palletize and prepare orders for shipment, • Record all material information to include: item code, damage, reel number, miscuts, location, and cut information, etc., • Process orders based on urgency and expedite accordingly, • Assist with inventory control and maintaining stock levels, • Maintain safety standards and clean/organized work environment, • Additional duties as assigned by supervisorKnowledge/Skills/Requirements:, • High School Diploma/GED (General Equivalency Diploma) or one year related industrial experience or equivalent training, • Demonstrate strong basic math and measuring skills, • Ability to read, comprehend, and respond to general instructions, direction, and correspondence, both oral and written, • Cooperatively works and interacts with members various departments * Personal protective equipment is required, • Continuous participation in company safety training, • Company forklift operation training and certificationPhysical Demands/Work Environment, • Temperatures may be impacted by extreme outdoor weather in plant and warehouse, • Regularly stands, bends, and reaches for extended periods, • Regularly moves about the facility, • Regularly lifts and moves materials up to 50 pounds, • Regularly uses hand and finger dexterity to adjust and manipulate controls, tools, and objects, • Occasionally required to move up to 100 pounds by pushing, pulling, or sliding material. Assistance provided as needed, • Visual inspection of material quality required, • Must be able to work in hot and cold environments without climate-control., • In-person attendance is an essential function of the jobShift Schedule and Information Must be available to work one of the following times:, • 1st Shift - 6:30am - 3pm - Distribution // 6:45am - 3:15pm - Manufacturing, • 2nd Shift - 2:30pm - 11pm - Distribution // 2:45pm - 11:15pm - Manufacturing, • 3rd Shift - 10:30pm - 7am - Distribution // 10:45pm - 7:15am - Manufacturing The perks of joining our Team, • Comprehensive Insurance Options - Competitive medical coverage with a variety of plan choices., • Progressive PTO & Paid Holidays - Tenure-based paid time off plus eight paid holidays annually, • 401(k) with Company Match + Profit Sharing - Matching 5% on 6% of employee contributions and annual profit‑sharing contributions., • Career Growth & Learning Support - Tuition reimbursement and employee assistance programs., • Referral Bonus Program - Employee referral bonuses paid out over the new hire's first year., • See all benefits we offer here #ZR

Job Description Service Wire Company, a premier supplier of industrial and utility wire and cable, is currently seeking a Machine Operator in Houston, TX. If you are looking to join a great organization and a chance to become a part of our growing team, this may be the opportunity for you! Position Summary: Our Machine Operators perform preparation setup of production machine(s). They also operate manufacturing machinery, monitor wire quality, and record fabrication data to ensure defect-free products as defined by industry regulations and customer specifications. Additionally, they transport wire and materials throughout facility on a forklift. Tasks/Duties/Responsibilities: • Prepare and setup machine for production by positioning the payoff, feeder, and take-up, • Operate the machinery by adjusting and maintaining production controls according to specifications, • Monitor the quality of wire during production and the finished product, • Perform routine lubrication of machinery parts and minor preventative maintenance, • Observe machine operation for equipment malfunction and report immediately, • Record detailed daily production data, • Maintain safety standards and clean work environment, • Additional duties as assigned by supervisorKnowledge/Skills/Requirements:, • High School Diploma/GED (General Equivalency Diploma) or one year related industrial experience or equivalent training, • Demonstrate strong basic math and measuring skills, • Ability to read, comprehend, and respond to general instructions, direction, and correspondence, both oral and written, • Cooperatively works and interacts with members of the manufacturing department and other company employees, • Must be able to work in hot and cold environments without climate-control., • In-person attendance is an essential function of the jobShift Schedule and Information, • Must be available to work one of the following times:, • 1st Shift - 6:45am - 3:15pm, • 2nd Shift - 2:45pm - 11:15pm, • 3rd Shift - 10:45pm - 7:15amThe perks of joining our Team, • Comprehensive Insurance Options - Competitive medical coverage with a variety of plan choices, • Progressive PTO & Paid Holidays - Tenure-based paid time off plus eight paid holidays annually, • Predictable, set schedules that support work-life balance - no rotating shifts, • 401(k) with Company Match + Profit Sharing - Matching 5% on 6% of employee contributions and annual profit‑sharing contributions, • Career Growth & Learning Support - Tuition reimbursement and employee assistance programs, • Tuition reimbursement up to $15,000 - annually to support your continued education and career growth, • Annual bonus potential up to $3,000 - through performance incentive programs, • Referral Bonus Program - Employee referral bonuses paid out over the new hire's first year, • See all benefits we offer here #ZR

Job Description Since 1975, Omega Flex has been supplying quality engineered flexible metal hose products that meet demanding industrial, commercial and residential applications requiring engineering innovation and experience. We are currently accepting applications for 1st Shift Assembler in our Houston, TX location. Duties: Assembly Machine Operator will construct, assemble and test mechanical parts to ensure they meet our specifications and standards. Identify and repair defects of the parts before they are sent out to our customers. Must be able to follow detailed work instructions, use tools and machinery to preform the task and verify the components meet our quality and safety standards. • Must be able to work in a fast-paced environment,, • Must possess basic math and reading skills, and have the ability to read measuring instruments., • Must have the ability to lift 60 pounds on a daily basis., • Mechanical ability and/or prior manufacturing experience helpful, but not necessary (we will train)., • Must be a reliable and dependable worker with great work ethic. Omega Flex provides competitive pay, a generous benefits package, vacation, 401k and profit sharing. Must be at least 18 years of age to apply. Must successfully pass pre-employment testing including a drug test. For consideration, please apply through this add or stop by our facility during normal business hours and complete an application.

Job Description Overview As a Saw Shop Operator, you’ll get to setup our builders for success by setting up and operating power saws to slot, cut, and trim wood for pallet creation! You’ll be the a vital piece of our pallet manufacturing process, and we’re looking for a motivated individual to fill this role! Hourly Pay: $14.00/hr + Piece Rate Shift(s): 1st Shift: Monday - Friday 6:00am - 2:30pm Location: 4847 Blaffer St Houston, TX 77026 Responsibilities Operate power saws to cut & trim wood pallets Follow and adhere to all safety rules and regulations Communicate to plant management effectively on a regular basis Ability to work overtime as needed Qualifications High School Diploma or GED Ability to lift wooden pallets which weigh about 50 lbs. on a regular basis Previous lumber, warehouse, construction, carpentry, landscaping, roofing, experience highly preferred Quick hands, attention to detail, commitment to quality Ability to communicate effectively Ability to work overtime as needed

Job Description Uni-Form Components is looking for a dependable, safety-focused Press Helper to join our manufacturing team. This position works alongside Press Operators to support the setup, pressing, and forming of steel heads using industrial presses, furnaces, and die sets. This is a hands-on position with an opportunity to learn the Press operation and develop additional manufacturing skills. What You'll Do • Assist Press Operators with press setup and preparation., • Read and follow job cards, prints, and production instructions., • Help gather, stage, and position the correct dies, tooling, and materials for each job., • Assist with loading and positioning material for the pressing and forming process., • Support furnace operations and material movement as directed., • Measure materials and help verify specifications throughout the process., • Safely operate forklifts and overhead cranes as trained and authorized., • Use grinders, hammers, wrenches, pry bars, and other hand tools., • Inspect equipment and communicate any safety or equipment concerns., • Maintain a clean and organized work area., • Follow all company safety procedures and required PPE standards., • Perform other duties as needed to support Press operations.What We're Looking For, • Manufacturing or industrial experience preferred., • Experience in metal forming, heavy manufacturing, or working around industrial equipment is a plus., • Ability to read and understand basic job cards, measurements, prints, and drawings., • Forklift and overhead crane experience preferred., • Basic reading, writing, and math skills., • Strong attention to safety and quality., • Reliable and punctual., • Willingness to learn and take direction from experienced Press Operators., • Ability to work independently when needed and as part of a team., • High school diploma or equivalent preferred.Physical & Work Environment, • Ability to work around industrial presses, furnaces, and high temperatures., • Exposure to noise, dust, and varying temperatures., • Ability to stand, walk, bend, stoop, kneel, and reach for extended periods., • Ability to lift and carry up to 50 lbs., with lifting equipment available for heavier materials., • Ability to wear required PPE., • Willingness to work overtime as production needs require.Why Join Uni-Form Components? The Press Helper position is an opportunity to gain hands-on experience with specialized metal-forming operations while learning from experienced Press Operators. Employees who demonstrate the skills, safety awareness, and ability to operate independently may have opportunities to continue developing within the Press department. Apply today to build your future with Uni-Form Components. Powered by JazzHR lOm3pWHT9G

Job DescriptionBridge Saw Operator – 1st ShiftIndustrial Cutting, Stone Fabrication & Manufacturing Openwork is hiring an experienced Bridge Saw Operator for an established industrial manufacturing company in Houston, TX 77028. This hands-on position focuses on operating industrial cutting equipment, cutting and preparing materials, handling heavy materials, and supporting daily production operations. Qualified candidates must have at least 2 years of experience operating bridge saws, industrial cutting equipment, or performing related manufacturing or fabrication work. Forklift operating experience is required, along with strong attention to detail, workplace safety, and reliable attendance. Position Details: • Location: Houston, TX 77028., • Pay: $20/hr., • Shift: 1st Shift., • Employment: Full-Time | Temp-to-Hire., • Work Environment: Industrial Manufacturing., • Safety Requirements: Respirator and mandatory hygiene procedures. Key Responsibilities: • Operate industrial bridge saws to cut materials according to specifications., • Measure, position, and prepare materials for cutting., • Cut granite, marble, quartz, and other materials as assigned., • Operate forklifts to move and position heavy materials., • Safely maneuver forklifts and equipment in confined spaces., • Inspect finished cuts for accuracy, quality, and defects., • Maintain production efficiency and meet daily work requirements., • Monitor equipment operation and report mechanical or safety concerns., • Follow established cutting, material-handling, and safety procedures., • Maintain a clean, organized, and safe work environment. Qualifications: • Minimum 2 years of industrial cutting, manufacturing, or fabrication experience required., • Forklift operating experience required., • Previous industrial bridge saw operating experience preferred., • Experience cutting granite, marble, quartz, or similar materials preferred., • Experience operating industrial cutting equipment., • Manufacturing, fabrication, countertop, or stone industry experience preferred., • Ability to safely move and handle heavy materials., • Comfortable operating forklifts in confined spaces., • Strong attention to detail, measurements, and quality., • Ability to follow written and verbal instructions., • Ability to maintain a steady and productive work pace., • Dependable attendance and punctuality., • Strong commitment to workplace safety., • Ability to meet all respirator, PPE, and hygiene requirements. Work Environment & Physical Requirements: • Safety-sensitive industrial manufacturing facility., • Respirator required throughout the entire shift., • Must be clean-shaven where the respirator seals against the face., • Mandatory shower at the end of each shift., • Work involves lead-containing materials., • Periodic blood testing required., • Regular operation of industrial cutting equipment and forklifts., • Frequent standing, walking, bending, reaching, and physical activity., • Handling and positioning heavy materials., • Follow all required PPE, equipment safety, and hygiene procedures. Why Consider This Opportunity? • $20 per hour., • Full-time, temp-to-hire opportunity., • Potential for pay increases based on performance., • Hands-on industrial cutting and manufacturing experience., • Opportunity to utilize bridge saw and forklift operating skills., • Long-term employment potential. Apply TodayIf you have 2+ years of industrial cutting, manufacturing, or fabrication experience, along with forklift operating experience, we encourage you to apply. Candidates must be comfortable working in a safety-sensitive manufacturing environment and following all required respirator, hygiene, and workplace safety procedures. Apply for the Bridge Saw Operator – 1st Shift position in Houston, TX 77028, or visit Openwork to explore additional career opportunities. About OpenworkOpenwork has more than 50 years of experience connecting talented professionals with meaningful career opportunities. We are committed to helping people build rewarding careers while supporting employers with exceptional talent. Equal Opportunity Employer (EOE)

Job DescriptionMachine Operator . Job Description This role focuses on operating heavy industrial equipment to press and form thick metal components used in the manufacture of aerospace and airplane frames. You will work with a variety of machines, perform precise measurements, and maintain a clean, organized work area while supporting production needs across the shop. . Responsibilities • Operate various metal forming machines, including band saws, press machines, bump machines, stretch machines, and other production equipment, to shape thick metal into aerospace frame components., • Measure parts accurately using a tape measure and other measuring tools to ensure all components meet required specifications and tolerances., • Set up machines as needed, monitor operations during production runs, and make adjustments to maintain quality and efficiency., • Handle and move metal materials and parts safely, including working with jib cranes or overhead cranes when required., • Read and interpret blueprints and production documents to understand part dimensions, tolerances, and processing requirements., • Perform basic CNC machine operation as needed to support production and ensure consistent output quality., • Maintain a clean, organized, and safe work area, following all housekeeping standards and 5S principles., • Assist in other production areas as needed to support overall workflow and meet production goals., • Follow all safety procedures and use appropriate personal protective equipment while working with heavy machinery and metal materials., • Work collaboratively with team members and supervisors to identify and resolve production issues and improve processes. Requirements • At least 3 years of machine operating experience in a manufacturing environment., • Experience in the metal manufacturing or forging industry., • Hands-on experience operating machines such as press machines, stretch machines, bump machines, band saws, and other metal fabrication equipment., • Jib crane or overhead crane experience for safe handling and movement of heavy materials., • Ability to read and use a tape measure accurately for precise measurements., • CNC machine operating experience in a production or fabrication environment., • Ability to read and interpret blueprints and production drawings., • Strong production and machine operation skills with a focus on quality and consistency., • Good job tenure demonstrating reliability and commitment., • Strong math skills to support accurate measurements and calculations. . Why Work Here? Employees benefit from a culture that values long-term careers, stability, and loyalty. The company is known for taking care of its workforce, with many individuals returning after exploring other opportunities. You can expect a supportive environment where tenure is common, processes are well established, and your skills are recognized and appreciated. . Work Environment This position is based in a manufacturing environment that is not climate controlled, so temperatures can be high during the summer. The facility has an older exterior, but the shop floor is kept as clean as possible, extremely organized, and clearly labeled throughout. You will work around heavy industrial machinery, cranes, and metal fabrication equipment. The standard day shift runs from 5:00 a.m. to 3:30 p.m., Monday through Thursday, with longer hours as needed; Fridays typically run from 5:00 a.m. to 1:30 p.m., with additional time and occasional weekend work as required by production demands. All new hires train on day shift for at least two weeks before transitioning to another shift if applicable. Other shifts include an off/2nd shift (MondayFriday, 1:00 p.m. to 9:30 p.m.) and a night shift (Sunday 9:00 p.m. to 5:30 a.m., then MondayWednesday 5:00 p.m. to 5:30 a.m., with Thursday as needed). The dress code requires steel-toe footwear, jeans, and a work shirt, along with appropriate personal protective equipment provided or specified by the company. . . . . . . . . . Job Type & Location This is a Contract to Hire position based out of South Houston, TX. Pay and Benefits The pay range for this position is $19.00 - $22.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Job Type & Location This is a Contract to Hire position based out of South Houston, TX. Application Deadline This position is anticipated to close on Nov 6, 2026. Workplace Type This is a fully onsite position in South Houston,TX. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description This job is posted on behalf of Talent Guide USA by Top Echelon. 1st Shift Folder Gluer Operator / Lead Operator $28–$40+ per hour | Overtime | Excellent Benefits | Paid Training | Relocation Assistance A growing folding carton manufacturer is expanding its operations in the area and adding experienced Folder Gluer Operators, Lead Operators, and Supervisor-level talent to its 1st shift team. This is an excellent opportunity for an experienced Folder Gluer Operator—or a strong Assistant Operator ready to move up—to join a progressive, technology-driven company that continues to invest in modern equipment, automation, employee training, and long-term growth. Why Consider This Opportunity? • $28–$40+ per hour, depending on experience, • Overtime opportunities, • 1st shift, • Outstanding company benefits, • Paid technical training, • Regular performance and compensation reviews, • Advancement opportunities for strong performers, • Opportunities to move into Lead and Supervisor positions, • Relocation assistance available for qualified candidates, • Modern, progressive folding carton operation, • Stable company with low employee turnover, • Strong team-oriented culture, • Company trains, develops, and promotes from withinThe Position Reporting to the Production Manager, the Folder Gluer Operator will be responsible for setting up, operating, and maintaining high-speed folder gluer equipment used in the production of printed folding cartons and paperboard packaging. You'll work with modern converting equipment producing quality cartons for customers across a variety of markets. Responsibilities include: • Setting up and operating high-speed folder gluer equipment, • Completing machine changeovers and make-readies, • Setting feeders, belts, rails, folding sections, compression sections, and delivery systems, • Setting and monitoring glue systems, • Running a variety of folding carton styles, • Making adjustments throughout the run to maintain quality and productivity, • Inspecting cartons for proper folds, glue application, registration, and overall quality, • Troubleshooting equipment and production issues, • Monitoring production speeds and minimizing waste and downtime, • Performing routine preventative maintenance, • Maintaining an organized and safe work area, • Working closely with Die Cutting, Printing, Quality, and Production teamsExperience We're Looking For Candidates should have 1–2+ years of Folder Gluer experience, preferably in a folding carton or paperboard packaging environment, with equipment such as: Bobst | Heidelberg | Jagenberg | Brausse | Koenig & Bauer | Signature | International PaperBox | Similar Folder Gluer Equipment Experience producing straight-line, auto-bottom/crash-lock, 4-corner, 6-corner, and other folding carton configurations is especially attractive. You do not need experience on the company's exact equipment. If you understand folder gluer setups, folding carton construction, glue systems, quality requirements, and machine troubleshooting, the company is willing to train you on its specific equipment. Ready to Move Up? Experienced Folder Gluer Assistants are encouraged to apply. If you've been working alongside an experienced operator and are ready to set up and run your own machine, this company offers the paid training and advancement opportunity to help you make that move. The company is also interested in talking with Lead Folder Gluer Operators, Converting Leads, and experienced Pressroom/Finishing Supervisors who may be ready for their next opportunity. The company is expanding, and that growth is creating opportunities for people who want more than just another machine operator job. Strong performers can move into Lead, Supervisor, and other production leadership positions as the operation continues to grow. If you're an experienced folding carton professional looking for better pay, modern technology, excellent benefits, paid training, and a company where you can continue to advance, we'd like to hear from you.

Job Description Pay starting at $13.00/hour Full-time and part-time available All Shifts Available 1st Shift 6:00am - 2:00pm 2nd Shift 2:00pm - 10:00pm 3rd Shift 10:00pm - 6:00am At The Shores at Clear Lake, we are dedicated to enriching the lives of our residents through compassionate care and unwavering support. We are seeking individuals who share our commitment to creating exceptional living experiences and who are eager to contribute to a supportive, family-like atmosphere. When you join The Shores at Clear Lake, you become an integral part of a team that values making a positive difference every single day. If you are driven by empathy and excellence, we invite you to bring your talents to our welcoming community. Full-time benefits include: • PTO (Paid Time Off) and Holiday Pay: Take advantage of paid time off to maintain a healthy work-life balance., • Daily pay: Get paid daily, providing you with financial flexibility and control over your earnings., • Health/Dental Insurance, • 401K with discretionary employer match: Plan for your financial future with our 401k program., • Life Insurance: Company paid life insurance, • Short and long-term disability: Financial security while you recover from an injury that puts you out of work, • Referral Bonuses: Refer qualified candidates and earn rewards, • Tuition Reimbursement: Invest in your education with our support, • Employee Assistance Program: Connecting our employees with resources for handling personal challenges Summary of Duties of the Resident Care Assistant The primary responsibility of the Resident Care Assistant (RCA) is to provide physical and psychosocial care to all residents in a manner that promotes dignity, choice, and individuality. The Resident Care Assistant reports to the shift supervisor as well as the Wellness Director. Essential Functions of the Resident Care Assistant • Provides all necessary care and services to assigned residents and assists other wellness department associates as needed., • Works collaboratively with peers and other team members., • Provides assistance with activities of daily living such as with bathing, dressing, personal hygiene (includes: shaving, oral care, nail care, hair care, foot care), toileting, eating, and ambulation/mobility., • Maintains professional demeanor at all times when interacting with residents and families., • Reports any suspected or witnessed instances of verbal, mental, or physical abuse to licensed staff immediately., • Utilizes safe transfer techniques when assisting residents with mobility., • Washes residents’ laundry as needed., • Understands and uses Centers for Disease Control and Prevention Standard Precautions, OSHA's Occupational Exposure to Bloodborne Pathogens standard, and follows established infection control procedures, hazardous communication, and other safety rules., • Documents provision of services on company forms., • Operates designated medical equipment, copy, scan, fax machines, and telephone., • Escorts residents and coordinates internal transportation needs., • Assists residents with personal correspondence/telephone use when requested., • Observes and reports changes in residents’ physical condition and cognitive/emotional status to Wellness Director or supervisor, as needed., • Conducts room checks and resident rounds., • Monitors for environmental safety hazards., • Respond to emergencies in a prompt and calm manner; Immediately reports such emergencies to the supervisor., • Uses tactful, diplomatic communication techniques in potentially sensitive or emotionally charged situations., • Follows-up with appropriate staff, residents, or other individuals regarding reported complaints, problems, and concerns. Non-Essential Functions of the Resident Care Assistant • Participates in and supports the resident-centered activities program., • Care for sensory enhancement devices such as eyeglasses and hearing aids., • Completes housekeeping tasks such as bed-making, linen changes, vacuuming, emptying trash, and cleaning bathroom., • Acts as ambassador and public relations representative to guests and other off-campus visitors., • Copies special paperwork or forms., • Assists in a variety of tasks related to dining (escort residents to dining room, assist with set-up and clean tables, serve meals, bus tables, etc.)., • Demonstrates an appreciation of the heritage, values and wisdom of the residents, and an understanding of the aging process., • Collaborates with associates in other departments to assure necessary care and services are provided., • Participates in projects or committees as assigned., • Performs related duties as assigned., • Attends and participates in staff meetings and mandatory in-services. Knowledge, Skills, Abilities, and Experience • Ability to read, write, and speak in English., • Satisfactory completion of the company Resident Assistant skills competency checklist., • Be in good physical health and free of communicable diseases; Lifting, bending, and pushing medication cart about residence is required., • Must be able to lift 40 pounds., • Completion of drug testing and criminal background check upon hire and upon request of supervisor., • Experience in Assisted Living preferred.

Position Description Ryder is hiring aMid-LevelDiesel Technician in Houston, Texas — providing a stable company for your career with weekly pay and excellent benefits. Hear it from a Ryder Technician Employee Here: https://RyderCareers.Video/HowToT2 • Hourly Pay: $29.51 per hour, • Certification Bonus of $100 for each New ASE Certification Obtained up to $700, • Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year, • Schedule: Sunday through Thursday, • Hours: Second Shift Monday through Thursday 2:00 pm - 10:30 pm, Sunday 7:00 am - 3:30 pm We provide the best State-of-the-Art Diagnostics and Tools to all Ryder Maintenance Repair Mechanics who work on Heavy Duty Vehicles Apply Here with Ryder Today Spots are filling fast — click apply now to secure your spot. Questions? Call Susan or text “Houston T2” to 904-544-4210 to speak with your recruiter today All the benefits you expect — without the wait. • Medical, Dental, Vision after 30 days, • Earn PTO starting Day 1. Up to 80 hours accrued in 1st year, • Yearly merit pay increases, • 401 (k) company match, • PPE, uniforms, and boot allowance, • Paid training that keeps you ahead, • Safety‑first workplace & State-of-the-art equipment, • Top Tech Competition: Earn $250 – $50,000 per year, • U.S. military veterans - extra paid day off, • 15% company stock discount, • Up to $5,000 in Tech tuition repayment, • 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure), • Employee discounts on tools, vehicles, travel, tech & more Click Here to See All Ryder Careers:https://www.ryder.com/careers/diesel-technicians At Ryder, you will be recognized and respected for your expertise and skill by joining a community of proud women and men in logistics, including many Military Reservists and Veterans. Ryder provides a clear path for career development and advancement. Share Ryder jobs with people you know-get paid for it. Ryder offers unlimited bonuses up to $1,500 for every hired Diesel Mechanic Technician and Fuel Service Employee. EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, required, • Two (2) years or more of a combination of classroom training and work experience in required experience, preferred, • Valid Commercial Driver License (CDL) CLASS A,preferred, • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Must be able to obtain CDL within 6 months after hire, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test, • Pass a Ryder Background and Motor vehicle check including drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities • Performs vehicle maintenance and repair duties, • Performs standard vehicle maintenance, • Performs standard component inspections and repairs, • Performs preventive maintenance, • Diagnoses standard mechanical and electronic problems, utilizing diagnostic computer when applicable, • Identifies root cause of basic failures/conditions and perform repairs as required, • Replaces defective components as instructed, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task, • Utilizes key functions of Shop Management System and electronic documentation available, • Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT), • Performs other support duties as required to support operations. These could include but are not limited to Service Island support Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 1 month ago (10/1/2026 4:42 PM) Requisition ID 2026-212000 Location (Posting Location) : State/Province TX Location (Posting Location) : City HOUSTON Location (Posting Location) : Postal Code 77092 Category Technicians/Service Employees4 Employment Type Regular-Full time Travel Requirements 0-10% Position Code 1000120 Min Pay USD $29.51/Hr. Max Pay USD $29.51/Hr.

Additional Benefits: • Paid Time Off • Medical Insurance • Dental Insurance • Vision Insurance • Life Insurance • 401K • Associate Referral Program • $125 Boot allowance after 90-days of employment Our associates also enjoy numerous associate discounts and opportunities to grow with

Experienced CNC setup machinists, this one’s for you. Salary: $30 - $35 per hour A bit about us: We’re partnering with a well-established precision manufacturing company in Houston looking to add experienced CNC Machinists to the team. Why join us? $30-$35/hr, depending on experience 1st Shift:

Job Description Pipe Fitter Pay: $37.00/hour Shift: Monday – Friday, 1st shift Location: Pearland, TX Integrity Trade Services is hiring Pipe Fitters in Pearland, TX. to start at $37.00/hour. Receive comprehensive benefits through ITS upon hire! Responsibilities: • Cut, thread, and hammer pipe to specifications using saws, torches, and pipe threaders, • Attach pipes to walls, structures, and fixtures with brackets, clamps, or welding, • Measure and mark pipes for cutting and threading, • Plan pipe system layout, installation, or repair according to specs, • Modify, clean, and maintain pipe systems and related equipment Qualifications: • 3-5 years of related experience, • High school diploma or equivalent, • Ability to lift up to 50 lbs and stand for long periods, • Must pass a weld test, • Tools required for pipe fitting Skills: • Pipe fitting, layout, and installation, • Welding and torch cutting, • Pipe threading, bending, and support installation, • Pipe system inspection and modification, • Use of hand and power tools Why choose Integrity Trade Services At Integrity Trade Services, we value our employees by offering a competitive weekly paycheck and a comprehensive benefits package, including medical, dental, and vision insurance. Join a reputable company that prioritizes safety, fairness, and career development. Interested? Click Apply and check your email for follow-up instructions to complete your candidate profile with us. For questions, please call or text Brenda Gonzalez at 281-479-1803. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities #ZR #HIGH1

Job Description Manufacturing Process Engineer - Up to $130K annually DOE! This position is a direct hire opportunity! Integrity Trade Services is hiring a Manufacturing Process Engineer for our manufacturing client to start immediately up to $130,000K annually DOE! Receive comprehensive benefits through our client upon hire! Responsibilities: The Manufacturing Process Engineer will support manufacturing operations across multiple facilities through equipment improvements, process optimization, resolution of recurring issues, and capital project execution. This hands-on role partners closely with Operations and Maintenance teams to improve equipment reliability, product quality, throughput, safety, and overall manufacturing performance. • Troubleshoot recurring equipment and process issues, identify root causes, and implement permanent corrective actions., • Design and implement improvements to existing manufacturing equipment, processes, and systems., • Evaluate, troubleshoot, and optimize industrial heating and cooling systems, including steam and water systems., • Improve bulk material handling and conveying systems, including pneumatic conveying, blowers, and feeding equipment., • Analyze manufacturing parameters to improve process consistency, reduce cycle times, and increase quality and throughput., • Manage capital projects from concept development and business case preparation through budgeting, design, installation, and commissioning., • Collaborate with Operations and Maintenance teams to improve equipment reliability and reduce recurring failures and downtime., • Support equipment and process improvements involving PLCs, controls, sensors, instrumentation, and automation., • Develop and review equipment drawings, specifications, and technical documentation., • Ensure equipment modifications and new installations meet applicable engineering and safety requirements., • Identify opportunities to standardize successful improvements across manufacturing facilities. Location: Houston, Texas Schedule/Shift Details: 1st Shift, Monday-Friday • Overtime as needed. Qualifications: • Bachelor’s degree in Engineering or a related technical discipline., • Five or more years of manufacturing, mechanical, or process engineering experience preferred., • Strong hands-on experience troubleshooting industrial equipment and resolving complex mechanical and process issues., • Demonstrated experience repairing, optimizing, and designing industrial heating and cooling systems., • Experience with bulk material handling and/or pneumatic conveying systems., • Proven experience managing equipment modifications and capital projects, including budget management and business case preparation., • Strong root-cause analysis, problem-solving, and project management skills., • Working knowledge of PLCs, controls, and industrial automation preferred., • Experience with SolidWorks, AutoCAD, Inventor, or similar CAD software preferred., • Ability to collaborate effectively with Operations, Maintenance, vendors, and plant leadership., • Strong communication skills, including the ability to explain technical information to nontechnical audiences., • Ability to travel occasionally between company manufacturing facilities. Benefits: • Medical, • Dental, • Vision, • PTO, • 401k Why choose Integrity Trade Services? At ITS, we offer our employees a competitive salary paid weekly and a comprehensive benefits package, including medical, dental, and vision insurance. Interested? Want to Learn More? Reach out to Melissa Bauza at m.bauza@itsstaffing.com or call 708-321-1266! Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities #zr #HIGH1

Job DescriptionJob Title: Manual MachinistJob Description This role focuses on machining, reconditioning, and repairing pumps and rotating equipment in a shop environment using manual machines. You will work from blueprints and drawings to restore a wide range of pump components, including split case, overhung, horizontal, and multistage pumps, ensuring precise dimensions and high-quality finishes. Responsibilities • Recondition and repair pumps and rotating equipment in the shop based on blueprints, drawings, and specifications., • Set up and operate manual lathes and vertical mills (including Bridgeport-style machines) to machine pump components and related parts., • Perform machining operations on split case pumps, overhung pumps, horizontal pumps, and multistage pumps., • Carry out line boring on pumps, including work on horizontal boring mills (HBM) when applicable., • Machine and finish internal pump parts such as shafts, sleeves, rings, impellers, heads, casings, and mounting faces for bearing housings., • Drill and face square plates, base plates, and other components to specified dimensions and tolerances., • Produce serrated finishes for flanges and accurately install and machine dowel/dial pins and keyways., • Work with parts ranging from approximately 4 inches up to 7 feet, maintaining extremely tight tolerances as required., • Machine components made from carbon steel, stainless steel, bronze, and other common industrial materials., • Read and interpret blueprints, drawings, and work instructions to determine machining methods and sequences., • Use precision measuring tools such as micrometers and calipers to verify dimensions and ensure quality., • Collaborate with welders, quality control personnel, and other machinists to complete jobs efficiently under one roof., • Maintain a clean, organized work area and follow shop safety procedures at all times., • Adapt machining approaches based on available equipment, including possible use of Vertical Turret Lathes (VTL) and Horizontal Boring Mills (HBM) depending on experience.Essential Skills, • At least 7 years of experience as a Manual Machinist in a machine shop environment., • Proficiency operating manual lathes for turning, facing, boring, and other standard operations., • Strong experience with vertical milling machines, including Bridgeport-style manual mills., • Hands-on experience with either a Vertical Turret Lathe (VTL) or a Horizontal Boring Mill (HBM)., • Proven ability to read and interpret blueprints and technical drawings for pump and rotating equipment components., • Demonstrated manual machining experience with pump parts such as shafts, sleeves, rings, impellers, heads, and casings., • Skilled in using precision measuring instruments, including micrometers and calipers, to hold tight tolerances., • Ability to machine a range of materials, including carbon steel, stainless steel, and bronze., • Experience performing line boring on pumps using appropriate manual equipment., • Capability to work to extremely tight tolerances on critical rotating and pump components.Additional Skills & Qualifications, • Experience operating both Vertical Turret Lathes (VTL) and Horizontal Boring Mills (HBM), not just one or the other., • Extensive background in machining pump parts for industrial applications., • Experience with turbine or compressor part machining and repair., • Proficiency in producing serrated finishes for flanges and machining keyways and dowel/dial pin locations., • Comfort working with a wide range of part sizes, from small components to large assemblies up to several feet in length., • Strong attention to detail and quality mindset when working with high-precision, tight-tolerance components., • Ability to work effectively in a small, team-oriented shop alongside welders, quality control, and other machinists.Why Work Here? You will join a smaller, well-established shop that enjoys national recognition and a steady, year-round workload. The environment supports learning and professional growth, giving you the opportunity to deepen your trade skills over time. Hours are consistently maintained around full-time levels, and high-performing individuals have a strong likelihood of transitioning into a long-term, direct role. You will be part of a close-knit, team-oriented culture where your contributions are visible and valued. Work Environment This position is based in a small, fully air-conditioned shop where all production activities operate under one roof. You will work closely with a team of approximately 8 to 10 people, including welders, quality control staff, and fellow machinists, in a very clean and organized environment. The role follows a day shift schedule, Monday through Friday, from 7:00 a.m. to 3:00 p.m., with typical weekly hours ranging from 40 to 45. You will work on manual lathes, vertical mills (including Bridgeport-style machines), Vertical Turret Lathes (VTL), Horizontal Boring Mills (HBM), and other conventional shop equipment while collaborating with adjacent welding and QC operations. Job Type & Location This is a Contract to Hire position based out of Pasadena, TX. Pay and Benefits The pay range for this position is $35.00 - $45.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Job Type & Location This is a Contract to Hire position based out of Pasadena, TX. Application Deadline This position is anticipated to close on Oct 29, 2026. Workplace Type This is a fully onsite position in Pasadena,TX. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Start Working Right Away – Apply Today! Weekly Pay Full-Time/Part-Time Temp-to-Hire Opportunity Position: Corporate Controller Pay Rate: $175k/yr Shifts Available: 1st shift Location: Houston, TX 77024 What You’ll Be Doing We’re hiring immediately for a Corporate Controller role in a fast-paced environment. We are looking for an experienced Corporate Controller to manage our accounting operations and ensure our financial reports are accurate and reliable. This role will oversee the accounting team, handle financial reporting and audits, ensure compliance, improve processes and systems, and support budgeting and planning activities. Responsibilities may include, but are not limited to: • Prepare and deliver accurate and timely monthly, quarterly, and annual financial statements in compliance with U.S. GAAP., • Direct all core accounting functions, including accounts receivable, accounts payable, general ledger, cost accounting, inventory accounting, revenue recognition, and key accounting estimates., • Design, implement, and maintain strong internal control systems to protect company assets and ensure adherence to company policies and regulatory requirements., • Establish, document, and refine accounting policies and business processes to strengthen internal controls and operational effectiveness., • Lead, mentor, and develop the accounting team through ongoing training, coaching, and performance management., • Partner with the VP of Finance to support financial analysis, long-range planning, and investor reporting activities., • Assess current accounting systems and tools, recommending and implementing enhancements or system upgrades to improve efficiency and scalability., • Collaborate with executive leadership to provide financial insights that inform strategic decisions and support long-term growth initiatives., • Oversee cash flow management, including monitoring payables, receivables, and overall working capital performance., • Remain informed of evolving accounting standards, regulatory changes, and industry best practices., • More duties may be assigned upon hire. What You’ll Need • At least 10 years of progressive accounting experience, including a minimum of 4 years in public accounting (Big Four experience preferred)., • Demonstrated leadership of corporate accounting and financial reporting functions within mid-sized or large organizations., • Proven track record of managing external audits, strengthening internal controls, and enhancing accounting systems and processes., • Strong expertise in GAAP, financial reporting, and complex technical accounting issues., • Experience collaborating cross-functionally with finance, operations, and senior leadership teams., • Background in private equity-backed companies, publicly traded organizations, or multi-entity structures is highly desirable., • Advanced Excel skills and proficiency with ERP systems., • Bachelor’s degree in Accounting, Finance, or a related discipline. Additional Information • 1st shift, • 8:00am - 5:00pm, • Monday - Friday Why You'll Love It Here • Weekly Pay, • Medical, Dental, Vision & Life Insurance, • Fast placement & growth potential Ready to get started? Click Apply Now to receive text updates and take the next step in your career today! Company DescriptionPartnering with a retirement planning company for a full time role.Partnering with a retirement planning company for a full time role.

Job Description Overview: This is an amazing opportunity for a hardworking individual to earn $17 to $19 hourly with flexible shifts, including weekends. Plus, radically affordable health insurance after 30 days. • Overtime Available, • 1st Shift, 2nd Shift, • Opportunity to work for a leading distributor of Carbon and Stainless Pipe, Fittings, and Flanges, • Flexible hours with weekend shifts available, • Hands-on experience with yard operations and inventory management, • Opportunity for growth and advancement within the company, • Affordable health insurance you can actually use, including $5 copays, $5 prescriptions, and free Telehealth services What you'll do as: Pipe Yard Associate • Assisting forklift operators with loading and unloading trucks, • Verifying inventory and maintaining accurate product information, • Using company-issued tablets to access the ERP system, • Performing physical inventory validation, • Maintaining organized yard locations Skills and Experience: Preferred Candidate Might: • Previous experience in an industrial environment, • Basic computer/tablet skills, • Ability to accurately read product descriptions and identifying information, • Experience with inventory management, • Experience with receiving and shipping activities Benefits: Don't miss this chance to enhance your experience in a production environment while enjoying competitive pay and a comprehensive benefits package. • Weekly pay, • $5 prescription drugs, • $5 doctor's visit copays, • Free teledoctor service, • Free counseling services, • Life insurance included, • Vision insurance included, • Dental insurance included, • Vacation and holiday pay, • Scholarship Opportunities, • 401(k) retirement plan, • Free legal services, • Our unbeatable employee discount program Apply now so we can hold a spot for you. We can’t wait to talk to you! ––Your Ōnin team