3rd shift jobs in Houston, TexasCreate job alerts

Job Description Overview SP+, a Metropolis company, is an artificial intelligence company for the real world. We use computer vision to enable checkout-free parking experiences. So there’s no fumbling with tickets, machines, apps, or credit cards. You just “drive in and drive out.” We are the largest parking network in America, with over 23,000 employees powering mobility at over 4,000 locations across North America and Europe. Today, we are reinventing parking. Because it’s important, it's everywhere and impacts everyone. Tomorrow, we will power checkout-free experiences anywhere you go to make the everyday experiences of living, working, and playing remarkable - giving us back our most valuable asset, time. Responsibilities This position is responsible for thorough inspections and quality repairs and maintenance to ensure that only safe and reliable vehicles are deployed in revenue service at the project. • Maintain all vehicles to ensure safety, reliability, and passenger comfort in accordance with contractual requirements and SP+ Fleet Services standards., • Perform quality maintenance inspections and repairs on all assigned vehicles and equipment., • Perform all maintenance duties in a safe and efficient cost-effective manner., • Maintain technical competency on assigned equipment and vehicles and actively engage in ongoing training and development programs offered by the company. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Education/Experience: High School Degree or equivalent required. Graduation from approved program at technical school a plus. Prior experience as a Mechanic or Vehicle Maintenance Technician and/or prior experience with heavy fleet vehicles preferred. Certifications: Possess or willing to obtain all applicable ASE certifications. License Requirement: Must possess a valid state-issued driver’s license with a current address and acceptable driving record. DOT Medical Card: A Medical Examiner’s Certificate (DOT Medical Card) is required. Hand Tools: Must have all necessary hand tools to perform maintenance duties. Availability to Work: Special shift requirements, if any, will vary depending on a location's hiring needs. If applicable, availability to work 2nd shift, 3rd shift and/or week-ends may be required. Minimum Age Requirement: Must be 21 years of age or older Language Skills: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one situations to customers and other employees of the company. Mathematical Skills: Ability to add, subtract, two digit numbers and multiply and divide with 10’s and 100’s. Ability to perform these operations using units of American money. Appearance: Employees will be required to maintain a neat and clean appearance and be in complete uniform at all times. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; and use hands to handle cash and equipment. The employee is occasionally required to sit and climb or balance. The employee must occasionally lift and/or move up to 100 pounds. Salary Range: $22.00 per hour Benefits: Eligible employees will participate in the various benefits plans including medical, dental, vision, flexible spending accounts, long/short term disability, life insurance, accident insurance, 401k and paid time off. SP+ is an equal opportunity employer committed in policy and practice to recruit, hire, train, and promote, in all job classifications, without regard to race, color, ancestry, religion, sex, age, national origin, citizenship status, marital status, sexual orientation, veteran status, gender identity, disability or other classes protected by federal or state law. SP+ does not tolerate harassment or retaliation against any employee or applicant based on these characteristics or because the individual exercised their EEO rights. Right to Work Poster SP+, a Metropolis Company, may utilize an automated employment decision tool (AEDT) to assess or evaluate your candidacy for employment or promotion. AEDTs are used to assist in assessing a candidate’s application relative to the required job qualifications and responsibilities listed in the job posting. As part of this process, SP+ retains data relevant to your candidacy, including personal information, for a period that is reasonably necessary for the use of the tool. If you are hired for the position, your data may become part of your employee records. If you are an applicant to a New York City job posting and wish to request an alternative selection process accommodation or have questions about our data retention policy, please contact . We are here to assist you.

Job Description ESSENTIAL DUTIES and RESPONSIBILITIES Greet and assist passengers in navigating through, and around the airport. Direct taxicabs to any and all persons requesting one. Dispatch a sufficient number of taxicabs to the terminal or to other loading points and the terminal. Assist passengers in acquiring their luxury limousines. Provide information to passengers who need assistance in getting to other forms of ground transportation. · Greet passengers at taxi curbside in Ground Transportation area of airport and offer them assistance or directions. Information provided to passengers must be accurate. • Direct passengers to the appropriate taxi/limo service., • Ensure that a sufficient number of taxicabs are available for the traveling passengers, and dispatch taxicabs to various loading points at terminal., • Communicate with drivers, co-workers, and supervisors and address any concerns. · Identify and report Rideshare operators not in compliance (i.e.) failing to display Trade Addresses, visible issues/damage to Rideshare vehicles. · Report Rideshare violations. • Must be 18 years of age or older at time of hire., • Minimum of high school education or GED and related factory experience, • Knowledge of metro area is desirable., • Customer service experience preferred., • Prior airport experience is preferred., • Must have an excellent attendance and arrive to work on time when scheduled and have access to reliable transportation. Special shift requirements, if any, will vary depending on a location's hiring needs. If applicable, availability to work 2nd shift, 3rd shift and/or week-ends may be required. PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; talk and listen. Employees are regularly exposed to outside weather conditions including snow storms, and extreme heat. This position is 100% outside work. WORK ENVIRONMENT Employees work in and around traffic situations, and employees are to be safety conscious at all times. Employees are frequently required to reach and or sign (communicate) with hands and arms. Employees on occasion must lift/move up to 50 lbs. Employees are regularly exposed to high levels of noise and/or fumes from either vehicles or airplanes. WILL BE REQUIRED TO PERFORM OTHER DUTIES AS REQUESTED, DIRECTED OR ASSIGNED Company DescriptionEngineering and Logistics Firm that provides service sectors include planning, civil, environmental, transportation, structural, water resources and water and wastewater engineering, program and construction management, the development of plans, specifications and estimates along with a cadre of other design engineering and construction phase services.Engineering and Logistics Firm that provides service sectors include planning, civil, environmental, transportation, structural, water resources and water and wastewater engineering, program and construction management, the development of plans, specifications and estimates along with a cadre of other design engineering and construction phase services.

Job DescriptionService Wire Company, a premier supplier of industrial and utility wire and cable, is currently seeking a 3rd shift Machine Operator in Houston, TX. If you are looking to join a great organization and a chance to become a part of our growing team, this may be the opportunity for you! Position Summary:Our Machine Operators perform preparation setup of production machine(s). They also operate manufacturing machinery, monitor wire quality, and record fabrication data to ensure defect-free products as defined by industry regulations and customer specifications. Additionally, they transport wire and materials throughout facility on a forklift. Tasks/Duties/Responsibilities: • Prepare and setup machine for production by positioning the payoff, feeder, and take-up, • Operate the machinery by adjusting and maintaining production controls according to specifications, • Monitor the quality of wire during production and the finished product, • Perform routine lubrication of machinery parts and minor preventative maintenance, • Observe machine operation for equipment malfunction and report immediately, • Record detailed daily production data, • Maintain safety standards and clean work environment, • Additional duties as assigned by supervisorKnowledge/Skills/Requirements:, • High School Diploma/GED (General Equivalency Diploma) or one year related industrial experience or equivalent training, • Demonstrate strong basic math and measuring skills, • Ability to read, comprehend, and respond to general instructions, direction, and correspondence, both oral and written, • Cooperatively works and interacts with members of the manufacturing department and other company employees, • Must be able to work in hot and cold environments without climate-control., • In-person attendance is an essential function of the jobShift Schedule and Information, • Must be available to work Sunday - Thursday 10:45pm - 7:15am. $1.50/hr shift differential offered.The perks of joining our Team, • Comprehensive Insurance Options - Competitive medical coverage with a variety of plan choices., • Progressive PTO & Paid Holidays - Tenure-based paid time off plus eight paid holidays annually, • 401(k) with Company Match + Profit Sharing - Matching 5% on 6% of employee contributions and annual profit‑sharing contributions., • Career Growth & Learning Support - Tuition reimbursement and employee assistance programs., • Referral Bonus Program - Employee referral bonuses paid out over the new hire's first year., • See all benefits we offer here

Join our 3rd Shift team as a Maintenance Technician and enjoy competitive pay, top-notch benefits, and the chance to keep high-tech automotive manufacturing running at peak performance! This Jobot Job is hosted by: Brendan Thomas Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $27 - $35 per hour A bit about us: Are you ready to take your maintenance skills to the next level in a fast-paced automotive manufacturing environment? We’re looking for a hands-on Maintenance Technician to join our team on 3rd shift, keeping operations running smoothly and safely while driving innovation and efficiency across the plant. This is for the 3rd Shift (11:00 PM – 7:30 AM). Why join us? Key Perks: • Competitive pay + Overtime (1.5x for overtime and 2x for Sundays if needed), • Relocation assistance available, • Fortune 500-level health/medical/dental/vision, • 401(K) + match, • 3 weeks PTO + 14 paid holidays + option to purchase up to 6 weeks of additional vacation time, • Short, Long-Term and Life Insurance, • HSA+ FSA, • Employee Assistance Program + paid family leave, • Wellness programs!, • Discounts from preferred vendors, • Well-being Resources, • Professional training, • Opportunity for career advancement, working as part of an empowering workforce Job Details What You’ll Do • Keep our production floor running strong by maintaining, repairing, and troubleshooting equipment (mechanical, electrical, hydraulic, pneumatic, and more)., • Support continuous improvement by recommending changes to tooling, fixtures, and processes that improve quality and safety., • Perform inspections, adjustments, and repairs on a wide range of manufacturing and support equipment., • Champion safety by following lockout/tagout and OSHA standards 100% of the time., • Collaborate with supervisors and teammates to ensure issues are resolved quickly and effectively., • High school diploma or equivalent., • 5+ years of maintenance experience in automotive or plastics manufacturing., • Advanced troubleshooting skills across mechanical, electrical, pneumatic, and water systems., • Ability to read and interpret schematics., • Strong working knowledge of OSHA guidelines., • Computer literacy with CMMS software (Fiix or similar) and Microsoft Office., • Stand for extended periods (3–4 hours at a time)., • Regularly lift and carry up to 55 lbs., • Ability to push, pull, bend, and work in a physically active environment. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Under close supervision, expedites the movement of parts and material between production areas by listing or otherwise moving raw materials and/or parts. Prepares and coordinates schedules for pulling and delivering materials to control the flow of goods and regulate production floor space. Safely operates appropriate equipment (forklifts, hoists, crane, etc.) required to move materials along production floor. Follows all safety rules and practices. What we're looking for * Education: High School education or GED preferred * Experience: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * 6+ months warehouse experience * OSHA Forklift and HAZMAT certification a plus * Must be able to use proper techniques to lift up to 75 pounds. The ability to follow directions with emphasis on safety is extremely important. * Must be able to handle stress caused in meeting deadlines with tight scheduling requirements. * Must be able to shift priorities easily. * Must be able to use hands and feet simultaneously and for repetitive movements. * Must have responsible work habits. * Must be familiar with warehouse systems. LANGUAGE SKILLS: Ability to read, analyze, and interpret SOP's, coverage, documents, and regulations. Ability to write reports and business correspondence. Ability to effectively establish rapport, present information and respond to questions from managers, clients, customers and the public. Skill and ability to meet people and listen. MATHEMATICAL SKILLS: Ability to add and subtract two digit numbers and to multiply and divide with 10's and 100's. Ability to perform these operations using units of American money and weight measurement, volume, and distance. Understanding of metric system measurements is beneficial. REASONING ABILITY: Ability to apply common sense understanding to carry out detailed and uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. OTHER: Skill and ability to type. Skill and ability to operate a computer. Skill and ability to organize and prioritize work. Skill and ability to meet deadlines and operate office equipment. Skill and ability to use Microsoft office tools and company software. How you will thrive and create an impact Warehouse material handlers' essential duties are to perform various tasks in the warehouse such as but not limited to: * Inbound: Unload trucks, trailers, containers of freight, counting products, compare to manifest to check all shipments for damage, infestation, or production code dates. Material handlers must report shortages, damages, and mis-shipments on appropriate forms. Also be able to sign for inbound shipments when necessary. All inbound shipments are moved safely to storage locations to be efficiently stacked as store merchandise. * Order Picking: Ensure that the correct product number, quantity and type (lot, batch, serial number) of product are picked. Transport orders to shipping locations or delivery platforms with material handling equipment such as but not limited to fork trucks, cherry pickers, or pallet jacks. Materials handlers must be able to label, stencil, tag, mark orders, band, bundle, wrap, over-pack, and palletize as required. * Outbound: Compare quantity, labeling and address with order to ensure out-going shipments are complete and correct. Assign signature for outbound as necessary. Efficiently move product, cartons and or pallets into trailers, rail cars or containers. * Equipment: Maintain equipment in a neat, clean and orderly fashion. Operate equipment safely and efficiently. Comply with company standards and OSHA requirements. * Inventory: Keep accurate records and reports. Assist in physical inventories and cycle counts. Ensure proper stock rotation. May key inventory adjustments in computer. * Other Duties: Repack or re-box cases per customer instructions. Repair and consolidate damaged goods as required. Operate shrink-wrap machine. Charge forklift battery as needed; stack and or separate good from bad pallets when necessary; clean railcars, trailers, and truck docks, bays as requested. * Performs other duties as assigned. ENVIRONMENTAL WORKING CONDITIONS & PHYSICAL EFFORT (Under Typical Positions) The work environment characteristics and physical effort described here are representative of those an associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the associate is exposed to an industrial warehouse environment. The associate works near moving mechanical machinery and noise level in the work environment is usually loud. The job requires working in heights, exposure to changes in temperature, driving equipment, and maybe exposed to dust, fumes, or gases. The associate is required to stand and walk for the majority of the working day. The physical requirements of the job are for associates to talk, hear, bend/stoop, squat, crawl, climb height, reach above shoulder height, crouch, kneel, balance, and push/pull. Furthermore, the job requires associates to lift/carry/push or pull up to 75 pounds with or without assistance. Associates use both hands for repetitive actions such as grasping and manipulating as well as both feet for repetitive movement operating foots controls. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of employees assigned to this position. Avantor is proud to be an equal opportunity employer. Why Avantor? Dare to go further in your career. Join our global team of 14,000+ associates whose passion for discovery and determination to overcome challenges relentlessly advances life-changing science. The work we do changes people's lives for the better. It brings new patient treatments and therapies to market, giving a cancer survivor the chance to walk his daughter down the aisle. It enables medical devices that help a little boy hear his mom's voice for the first time. Outcomes such as these create unlimited opportunities for you to contribute your talents, learn new skills and grow your career at Avantor. We are committed to helping you on this journey through our diverse, equitable and inclusive culture which includes learning experiences to support your career growth and success. At Avantor, dare to go further and see how the impact of your contributions set science in motion to create a better world. Apply today! EEO Statement: We are an Equal Employment/Affirmative Action employer and VEVRAA Federal Contractor. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state/province, or local law. If you need a reasonable accommodation for any part of the employment process, please contact us by email at ___and let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address. For more information about equal employment opportunity protections, please view the Know Your Rights ___. Privacy Policy: We will use the personal information that you have submitted to us in order to consider your application for the relevant role. Your privacy is important to us. Please ___ for our Privacy Policy which explains the purposes for which we will use your personal information and the ways in which we will handle and retain your information. It also explains the rights you have in relation to your information, and how to contact us with any queries or requests. 3rd Party Non-Solicitation Policy: By submitting candidates without having been formally assigned on and contracted for a specific job requisition by Avantor, or by failing to comply with the Avantor recruitment process, you forfeit any fee on the submitted candidates, regardless of your usual terms and conditions. Avantor works with a preferred supplier list and will take the initiative to engage with recruitment agencies based on its needs and will not be accepting any form of solicitation.

Job DescriptionWork Schedule: This position is designated for Third Shift (11:00 PM – 8:00 AM). Purpose of the position Foxconn Technology Group, a globally leading electronics manufacturing company, is seeking a product engineer to lead the optimization of product production processes, drive defect resolution in high-volume, high-quality production, and ensure large-scale product reliability. After joining the team, you will have the opportunity to use stencil, Profile, SPI/AOI, 5W1H for root cause analysis of production anomalies, while monitoring production metrics to identify deviations and coordinate cross-functional solutions. Assist in customer agreement validation, document compliance results, and ensure results meet performance specifications. Duties and Responsibilities 1. Led root cause investigations and customer complaint resolution 2. Trained operators to standardize processes. 3. Designed and applied Stencil plan and effect tracking 4. Led FA report preparation and report consolidation 5. Summarize and refine risk points for proactive improvement 6. Perform other duties and responsibilities as required or requeste Education and work experience 4-years of high school or Associate degree or higher academic qualifications Working conditions • Join a high-growth, innovation-driven team shaping next-gen consumer electronics. vStGtorFCh

Job DescriptionDescription: • Able to perform in process inspection of all parts in accordance with the MCP, perform secondary process and rework as necessary, • Operate machines as assigned and assist at other workstations as needed, • Responsible for production reporting to include number of good parts, bad parts, down time with goal of exceeding standards., • Package products as directed in MCP, • Read and follow operating manuals: work instructions, master samples, process alerts and procedures, • Responsible for maintaining a clean and orderly work areas at each press including safety and 5S housekeeping *** 3rd Shift Schedule: Monday - Friday 11:00 pm to 7:30 am Requirements: Education: • A positive can-do attitude, • Understanding of company systems and procedures, • Ability to lift up to 30 lbs. without injury, • Good interpersonal skills both written and verbal, • Basic Math Skills: Able to add, subtract, multiple and divide, • Ability to make timely fact-based decisions; shows good judgment, • Ability to read and interpret company forms, • Strong attention to detail, • Willingness to provide feedback; both appreciative and constructive to work force., • Must be able to participate in job development training

Job Description DALLAS TRAILER REPAIR CO. TRAILER TECHNICIAN Job Summary The Trailer Technician is responsible for performing routine maintenance, diagnostics, and repairs on all trailers and related equipment. This role requires solid knowledge of mechanical tools, service and diagnostic equipment, and repair procedures. Successful candidates will demonstrate strong attention to detail, excellent communication and customer service skills, and the ability to work independently or as part of a team. Key Responsibilities • Inspect, analyze, and diagnose trailers and related equipment for mechanical issues and faulty parts., • Perform requested repairs according to industry standards and manufacturer specifications., • Conduct routine maintenance on trailers and related equipment., • Complete trailer body work and undercarriage repairs (e.g., air bag replacement, cross-members, dolly legs, tandem systems)., • Develop and document action plans for all repairs; follow checklists and established protocols., • Maintain a clean, organized, and safe workspace, including regular care of tools and equipment., • Follow all health and safety regulations and best practices., • Collaborate with coworkers and support team goals while being able to work independently when needed., • Perform other duties as assigned., • Knowledge & Skill Requirements, • Experience: 1–2 years of mechanical or equivalent experience., • Certifications: ASE certifications highly desired but not required., • Must pass pre-employment knowledge/skill test, background check (10-year), and drug/medical physical exam., • Proven mechanical aptitude and basic math skills., • Ability to read and write in English for documentation and communication., • Must have own tools and safety gear (safety glasses, steel-toed shoes, hearing protection). Physical Demands • Heavy Work: Exert up to 100 lbs occasionally, 50 lbs frequently, and 20 lbs constantly., • Frequent activities: Walking, standing, climbing, stooping, crouching, balancing, kneeling, and crawling., • Manual dexterity: Frequent use of hands and fingers for grasping, typing, and operating tools., • Sensory abilities: Talking, hearing, & vision sufficient for detailed inspection, safe operation of tools, machinery, and vehicles. Work Environment Work is performed primarily in a shop setting — both indoors and outdoors. Conditions may include exposure to: • Non-climate-controlled environments / Hot/cold temperature changes, • Dirt, dust, soot, fumes, and other airborne particles, • Moving mechanical parts and electrical equipment, • Chemicals and limited ventilation, • High places, confined spaces, and loud noise, • Proper PPE and adherence to safety protocols are required at all times. Compensation & Benefits Hourly Rate: $25 – $35 (depending on experience and location) Comprehensive Benefits Package Includes: • Medical, Dental, and Vision Insurance, • 401(k) Plan with Company Matching, • Paid Time Off, • Holiday Pay, • Training & Development Program, • Monthly Productivity/Bonus Incentive Program(s), • Shift Differentials (2nd or 3rd Shift ONLY) This job description is not an exhaustive list of all duties or responsibilities associated with the Trailer Technician position. Dallas Trailer Repair Co. reserves the right to modify duties and responsibilities as necessary to meet business needs.

Job DescriptionNOW HIRING – Sanitation Worker Location: Downtown Houston, TX Pay Rate: $14.00/hour Shift: 3rd Shift | 10:00 PM – 7:00 AM Schedule: Must be available to work weekends Job Overview We are seeking dependable, detail-oriented Sanitation Workers to maintain cleanliness and sanitation standards within a secure correctional facility in Downtown Houston. This role is essential to ensuring a safe, sanitary, and professional environment. Candidates must be reliable, able to work independently, and comfortable in a fast-paced setting. Key Responsibilities * Maintain cleanliness and sanitation of assigned areas throughout the facility * Wipe down surfaces, dust, and sanitize all designated work areas * Clean and maintain sanitation equipment and supplies * Complete daily sanitation logs and documentation accurately * Follow all safety rules, procedures, and sanitation protocols * Identify and report maintenance or safety concerns to the supervisor * Work efficiently to meet daily deadlines and facility standards QualificationsAbility to work independently and as part of a team * Comfortable working in a fast-paced environment * Strong attention to detail and time management skills * Ability to meet deadlines consistently * Physically able to lift and carry heavy objects * Valid Driver’s License or State ID required

Job Description Burrow Global is seeking an experienced Rotating Equipment Planner to support a critical outage on a large reciprocating compressor system. This role focuses on planning, scheduling, and coordinating activities for a major overhaul of the 1st (axial), 2nd, and 3rd (centrifugal) stage compressors. The successful candidate will work closely with the Maintenance, Engineering, Outage, and Contracting teams to ensure safe, reliable, and on-time execution. Candidates will work a 40 hour shift schedule until the TAR begins in the fall and them work a 7/12 schedule until the TAR is completed. Key Responsibilities: • Develop, maintain, and optimize detailed outage work packs for the major overhaul, including 1st (axial), 2nd, and 3rd (centrifugal) stage compressor components., • Create and manage the outage schedule, work breakdown structure, critical path, and resource loading (crafts, materials, tools, and spare parts)., • Identify, sequence, and prioritize maintenance tasks (inspection, disassembly, refurbishment/replacement, reassembly, testing) and ensure proper logic for dependencies., • Coordinate with Engineering for technical scope, drawings, Bill of Materials (BOM), and special tools required for the overhaul., • Ensure all planning activities align with Company QA/QC, HSE, mechanical integrity, and regulatory requirements., • Prepare and issue work packages, permits to work, lockout-tagout (LOTO) procedures, and risk assessments., • Engage with procurement to ensure timely availability of parts, consumables, and tooling; track long-lead items and vendors., • Manage change control, deviations, and field changes; maintain accurate progress reporting and metrics (progress vs. plan, earned value, look-ahead schedules)., • Collaborate with outage lead, maintenance supervisors, and craft supervisors to optimize manpower and equipment utilization., • Provide pre-outage planning deliverables (pre-job packs, risk assessments, spare parts lists) and post-outage closeout documentation., • Lead or participate in daily planning/coordination meetings, facilitating clear communication between company stakeholders, vendor, and client teams. Qualifications: • Minimum 5–7 years of rotating equipment planning/maintenance planning experience in petrochemical, refining, or heavy industrial environments., • Demonstrated experience planning and executing outages involving major compressor packages (reciprocating and/or centrifugal stages)., • Strong knowledge of rotary equipment (pumps, turbines, compressors), mechanical integrity, LOTO, PTW, RCA, and safety best practices., • Proficiency in planning tools and scheduling software (e.g., Primavera P6, MS Project, SAP PM, and CMMS). Strong ability to build and maintain credible work packs and look-ahead plans., • Familiarity with major overhaul workflows: disassembly, inspection, component refurbishment/replacement, alignment, clearances, lubrication systems, seals, couplings, valves, instrumentation., • Excellent communication, coordination, and problem-solving skills; ability to work with cross-functional teams and subcontractors., • Ability to read mechanical, P&ID, electrical, and control system drawings; BOMs and spare parts catalogs., • Knowledge of Permits-to-Work, LOTO, hot work, confined space, and other safety processes. Educational requirements: • Bachelor’s degree in Mechanical Engineering, Maintenance Engineering, or a related technical field preferred; equivalent experience considered., • Willingness to work a site-based schedule, with potential long hours during critical outage windows; occasional travel to supplier sites as required.

Job DescriptionFoxconn is a leading provider of innovative electronics manufacturing services (EMS), cutting-edge technologies. We are committed to quality, precision, and operational excellence. We are seeking a skilled and motivated Shift Supervisor/Engineer to lead our night shift SMT production team in a fast-paced, high-volume manufacturing environment. Job Summary The SMT Line Supervisor/Engineer is a hands-on leader responsible for overseeing the safe and efficient operation of the Surface Mount Technology (SMT) production lines during the 2nd or 3rd shift. This role is critical to achieving production goals, maintaining the highest quality standards, and developing a highly effective team. The ideal candidate is a proactive problem-solver with deep technical knowledge of SMT processes and strong leadership skills to drive performance during non-traditional hours. Key Responsibilities Qualifications & Experience Required: · High School Diploma or GED equivalent. · Minimum of 3-5 years of experience in an SMT/Electronics Manufacturing environment. · At least 2 years of experience in a leadership or supervisory role (Team Lead, Supervisor). · Proven, hands-on experience with SMT processes and equipment (e.g., Fuji, Panasonic, ASM, Mycronic, etc.). · Strong understanding of IPC-A-610 standards (Acceptability of Electronic Assemblies). · Proficiency with Microsoft Office (Word, Excel, Outlook). Preferred: · Associate's or Bachelor's degree in Engineering, Business Management, or a related field. · Experience with ERP/MRP systems (e.g., SAP, Oracle, Epicor). · Certification in IPC-A-610. · Formal training in Lean Manufacturing, Six Sigma, or 5S Powered by JazzHR gGv2ebge4C

Job DescriptionFoxconn is a leading provider of innovative electronics manufacturing services (EMS), cutting-edge technologies. We are committed to quality, precision, and operational excellence. We are seeking a skilled and motivated Shift Supervisor/Engineer to lead our night shift SMT production team in a fast-paced, high-volume manufacturing environment. Job Summary The SMT Line Supervisor/Engineer is a hands-on leader responsible for overseeing the safe and efficient operation of the Surface Mount Technology (SMT) production lines during the 2nd or 3rd shift. This role is critical to achieving production goals, maintaining the highest quality standards, and developing a highly effective team. The ideal candidate is a proactive problem-solver with deep technical knowledge of SMT processes and strong leadership skills to drive performance during non-traditional hours. Key Responsibilities Qualifications & Experience Required: · High School Diploma or GED equivalent. · Minimum of 3-5 years of experience in an SMT/Electronics Manufacturing environment. · At least 2 years of experience in a leadership or supervisory role (Team Lead, Supervisor). · Proven, hands-on experience with SMT processes and equipment (e.g., Fuji, Panasonic, ASM, Mycronic, etc.). · Strong understanding of IPC-A-610 standards (Acceptability of Electronic Assemblies). · Proficiency with Microsoft Office (Word, Excel, Outlook). Preferred: · Associate's or Bachelor's degree in Engineering, Business Management, or a related field. · Experience with ERP/MRP systems (e.g., SAP, Oracle, Epicor). · Certification in IPC-A-610. · Formal training in Lean Manufacturing, Six Sigma, or 5S Powered by JazzHR Dil4yYhjow

Job Description As a machine operator you are responsible for loading and unloading parts and material to and from our machines, inspecting parts, packing, labeling, house keeping and more in this position. Responsibilities (Include but are not limited to): • Operate assigned machinery throughout shift, • Maintain product creation within designated cycle time at all times, • Communicate with leads and/or supervisors of any discrepancies or assistance needed, • Package finished product according to instruction; assure finished product meets quality and specifications, • Correct/separate good/bad products consistently, • Assemble finished product, if needed, • Promote and exercise safety by using Personal Protective Equipment (PPE) and follow all safety policies and procedures while in the plant, • Maintain cleanliness of area around assigned machine by picking up trash, sweeping, vacuuming, etc., • Assemble boxes to be used during shift and/or next shift, • Follow all health and safety regulations, • Assist cell leads in relieving operators for breaks, • Bilingual (English & Spanish) is a plus, • Experience in working in production setting a plus, but not required (training provided), • Must be able to lift 50 lbs. or more, • Must be able to sit and/or stand for the entire shift, • Must be 18 years of age or older, • Must have your own reliable transportation, • Must be authorized to work in the United States The description below is intended to describe the general content and requirements for the performance of this job but is not limited to: • While performing the duties of the job, the employee may be required to stand; walk; sit; use hands to finger, handle or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop, kneel, crouch or crawl; talk or hear; taste or smell., • The employee must be able to lift and/or move up to 30 pounds., • Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Some duties may be removed at any time and new duties may be added as GTI continues to grow. If and as required under federal or state law, upon request, reasonable accommodations which do not create an undue hardship will be considered, discussed, offered and implemented (if accepted) to enable persons with defined disabilities to overcome barriers to the performance of essential functions of the position. Job Posted by ApplicantPro

Job DescriptionBRAND NEW! 10 openings on each shift! Apply in person at 21840 Northwest Freeway Suite E Cypress, TX 77429! Job Title: General Warehouse Operators(Spanish Only OK) Location: Houston, TX 77095Job Type: Full-Time | Temp-to-Hire Pay: • 1st Shift: $12/hr (6:00 AM – 2:30 PM), • 2nd Shift: $12/hr (2:00 PM – 10:30 PM), • Receive plastic containers from a conveyor belt, • Trim excess plastic when needed, • Stack boxes onto pallets, • Perform basic quality checks, • Keep work area clean and organizedImportant:, • No machine operation required, • Employees will not interact directly with machineryWork Environment:, • Non-climate controlled warehouse, • Must be comfortable working in hot conditions (up to 120°ree;F in summer)Dress Code:, • Jeans, leggings, t-shirt (no shorts), • Must dress modestly, • Closed-toe shoes required (no additional PPE required)Requirements:, • Ability to stand for long periods, • Ability to lift and stack materials, • Reliable and punctual, • 1er Turno: $12/hora (6:00 AM – 2:30 PM), • 2do Turno: $12/hora (2:00 PM – 10:30 PM), • Recibir contenedores de plástico de una banda transportadora, • Recortar exceso de plástico cuando sea necesario, • Apilar cajas en tarimas (pallets), • Realizar inspecciones básicas de calidad, • Mantener el área limpia y organizadaImportante:, • No se requiere operar maquinaria, • No habrá interacción directa con máquinasAmbiente de Trabajo:, • Almacén sin aire acondicionado, • Debe estar dispuesto a trabajar en calor (hasta 120°ree;F en verano)Código de Vestimenta:, • Jeans, leggings o camisetas (no shorts), • Vestimenta modesta requerida, • Zapatos cerrados obligatorios (no se requiere PPE adicional)Requisitos:, • Capacidad para estar de pie por largos periodos, • Capacidad para levantar y apilar materiales, • Puntualidad y responsabilidad, • Disponibilidad para trabajar el turno asignado

Job Description Overview SP+, a Metropolis company, is an artificial intelligence company for the real world. We use computer vision to enable checkout-free parking experiences. So there’s no fumbling with tickets, machines, apps, or credit cards. You just “drive in and drive out.” We are the largest parking network in America, with over 23,000 employees powering mobility at over 4,000 locations across North America and Europe. Today, we are reinventing parking. Because it’s important, it's everywhere and impacts everyone. Tomorrow, we will power checkout-free experiences anywhere you go to make the everyday experiences of living, working, and playing remarkable - giving us back our most valuable asset, time. Responsibilities Basic Function: Ensures that the appropriate number of cars is kept on location throughout shift, cars are being parked in an appropriate fashion and the lot is kept clean and presentable. • Responsible for being at work every scheduled day, on time and in uniform., • Courteously assist customers by answering any questions they may have., • Control traffic at entrances and exits as needed., • Report any known accidents, observed or suspected violations of Company policy, safety hazards or any unusual occurrence to the Facility or Senior Manager., • Communicate debris, water, oil spills and etc. to Facility or Senior Manager., • Have a thorough knowledge of the major streets, landmarks and freeways in the area of the lot., • Assist Facility or Senior Manager with other duties as needed. Qualifications Qualification Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Education/Experience Required: Less than High School education or one month related experience, training or an equivalent combination of education and experience. License Requirement: The individual will only be required to have and maintain a valid state-issued driver’s license, with a current address and acceptable driving record, if the individual is expected to be able to drive a company vehicle or drive on company business. Availability to Work: Special shift requirements, if any, will vary depending on a location's hiring needs. If applicable, availability to work 2nd shift, 3rd shift and/or week-ends may be a requirement. Language Skills: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one situations to customers and other employees of the company. Mathematical Skills: Ability to add, subtract, two digit numbers and multiply and divide with 10’s and 100’s. Ability to perform these operations using units of American money. Appearance: Employees will be required to maintain a neat and clean appearance and be in complete uniform at all times. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; and use hands to handle cash and equipment. The employee is occasionally required to sit and climb or balance. The employee must occasionally lift and/or move up to 25 pounds. SP+ is an equal opportunity employer committed in policy and practice to recruit, hire, train, and promote, in all job classifications, without regard to race, color, ancestry, religion, sex, age, national origin, citizenship status, marital status, sexual orientation, veteran status, gender identity, disability or other classes protected by federal or state law. SP+ does not tolerate harassment or retaliation against any employee or applicant based on these characteristics or because the individual exercised their EEO rights. Right to Work Poster SP+, a Metropolis Company, may utilize an automated employment decision tool (AEDT) to assess or evaluate your candidacy for employment or promotion. AEDTs are used to assist in assessing a candidate’s application relative to the required job qualifications and responsibilities listed in the job posting. As part of this process, SP+ retains data relevant to your candidacy, including personal information, for a period that is reasonably necessary for the use of the tool. If you are hired for the position, your data may become part of your employee records. If you are an applicant to a New York City job posting and wish to request an alternative selection process accommodation or have questions about our data retention policy, please contact . We are here to assist you.

Job Description Machine Operator – Extrusion Location: Houston, TX 77018 Pay: $19–$21 per hour Shifts: • 1st: 6:00 AM – 2:00 PM, • 2nd: 2:00 PM – 10:00 PM, • 3rd: 10:00 PM – 6:00 AM Job Summary: Seeking an experienced Machine Operator with 2+ years of extrusion experience in a manufacturing environment. Will operate triple extrusion and co-extrusion machines using primarily granulated PVC (minimal polyurethane). No programming required. Requirements: • 2+ years extrusion machine experience (required), • Ability to work assigned shift, • Strong attention to quality and safety Company DescriptionAbout us: Express works with job seekers to help find the right job for their skills and experience. We have a variety of jobs available, including full-time, part-time, and temporary positions. As one of the leading staffing companies in Houston, we’re ready to help you take the next step in your career. Express Employment Professionals is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. We are committed to the principle of equal employment opportunity for all people and to hire and promote individuals solely based on their qualifications for the job. In compliance with applicable federal, Texas and local law, employment decisions are based on business needs, job requirements, and an individual’s qualifications regardless of race, color, religious creed, national origin, ancestry, age, gender, pregnancy, sexual orientation, gender identity, marital status, familial status, disability, genetic information or protected veteran status. We do not tolerate discriminaAbout us:\r\n\r\nExpress works with job seekers to help find the right job for their skills and experience. We have a variety of jobs available, including full-time, part-time, and temporary positions. As one of the leading staffing companies in Houston, we’re ready to help you take the next step in your career.\r\n\r\nExpress Employment Professionals is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. We are committed to the principle of equal employment opportunity for all people and to hire and promote individuals solely based on their qualifications for the job.\r\n\r\nIn compliance with applicable federal, Texas and local law, employment decisions are based on business needs, job requirements, and an individual’s qualifications regardless of race, color, religious creed, national origin, ancestry, age, gender, pregnancy, sexual orientation, gender identity, marital status, familial status, disability, genetic information or protected veteran status. We do not tolerate discrimina

Job Description Full time opportunities with a growing manufacturing company with operations across the United States has immediate openings at their East Houston facility. Company offers comprehensive benefits package, safe - rewarding work environment and opportunity for professional growth. Candidates should have experience working with steel or machine operation. Pay: $21 Hourly Shift: Training on day shift - then 2nd or 3rd shift Location: Houston, TX 77015 These positions will work within a fabrication / shop environment around large equipment and machinery helping to press, mold, and cut steel material. You will be responsible for loading, setting up, and fully operating the machines. Job Requirements • At least 5 years of industrial machine operation preferred, • Willingness to be trained on new machinery to build knowledge in an area with excellent growth potential., • Motivated and eager to learn all details within this specialized repair discipline., • Physically able to perform the mechanical duties required which includes lifting as much as forty-five to fifty pounds.

Job Description Spike Electric Controls is a leading manufacturer specializing in producing high-quality precision components and assemblies for various industries. We are dedicated to offering innovative solutions and delivering excellent products to our clients. We are currently seeking a skilled and experienced 3rd Shift Hydraulic Press Brake Operator to join our dynamic team. The ideal candidate will be a detail-oriented and safety-conscious individual with a strong work ethic and dedication to quality. Job Summary: As a 3rd Shift Hydraulic Press Brake Operator, you will be responsible for setting up, operating, and maintaining hydraulic press brake machines to produce high-quality parts while adhering to all safety protocols and production schedules. You will work closely with the production team to ensure the timely completion of orders and contribute to the overall efficiency of the manufacturing process. Responsibilities: • Operate hydraulic press brake machines, following established procedures and safety protocols, • Set up machines according to job specifications, including selecting appropriate dies, tooling, and material, • Read and interpret blueprints, schematics, and work orders to ensure accurate and efficient production, • Perform quality inspections of finished products to verify conformance to specifications and maintain high-quality standards, • Maintain accurate records of production, machine settings, and maintenance activities, • Troubleshoot and resolve machine issues and perform routine preventative maintenance, • Collaborate with other team members to ensure smooth production flow and timely order completion, • Follow all safety guidelines and report any safety concerns or incidents to the supervisor, • Maintain a clean and organized work area, contributing to a safe and efficient work environment, • High school diploma or GED equivalent, • Minimum of 2 years of experience operating hydraulic press brake machines, • Ability to read and interpret blueprints, schematics, and work orders, • Strong knowledge of press brake operations, tooling, and materials, • Excellent attention to detail and commitment to producing high-quality work, • Ability to use measuring instruments, such as calipers, micrometers, and gauges, • Strong problem-solving skills and ability to troubleshoot machine issues, • Excellent communication and teamwork skills, • Ability to stand for extended periods and lift up to 50 lbs, • Commitment to following all safety guidelines and maintaining a clean and organized work area, • Experience with CNC press brake machines

Job Description We are looking to add a dedicated and experienced Diesel Mechanic to maintain and repair a fleet of diesel-powered vehicles in the Southwest Houston area. These will be 3rd shift positions, and the ideal candidate will have a strong background in diesel mechanics. WORK SCHEDULE: For the 3rd shift; Sun-Thurs. 10pm-6:30am RESPONSIBILITIES: • Diagnose and repair mechanical problems in diesel trucks., • Perform regular maintenance tasks on diesel-powered delivery trucks and other fleet vehicles., • Communicate effectively with team members and management to provide updates on repair status., • Overhaul or replace worn or damaged parts using precision instruments, as well as power tools., • +2 years of related mechanical experience., • High School Diploma or GED., • Completion of a formal diesel mechanic training program or vocational school is preferred., • Must have a valid Driver's License, • Ability to read and interpret technical manuals, schematics, and service bulletins, • Must have own tools

Job DescriptionBenefits: • 401(k) matching, • Competitive salary, • Free food & snacks

Job Description Apply Today, Work Today Weekly Pay Job Description: We are Hiring Immediately for a Warehouse position! Loading/unloading of product, packing materials, cleaning and preparing a job site, using a variety of small tools and machines. Help with set up and take down of assembly process and collection of debris and trash. Requires bending, lifting, walking, climbing stairs. Job Requirements: • Ask about our Employee Rewards Program, • May be required to lift up-to 25lbs, • May be required to perform repetitive motions, • Must have reliable transportation, • Must be able to work in a team environment Additional Information: • Ask about our Employee Rewards Program, • Benefits include medical insurance, dental insurance, vision insurance and life insurance, • Some positions may not require background check or drug test Full-time, Part-time $10.00 - $11.50 / hr Shifts Available: • 1st Shift, • 2nd Shift, • 3rd ShiftFor this or other positions in your area. LI23 LILive24 Company DescriptionPartnering with a retirement planning company for a full time role.Partnering with a retirement planning company for a full time role.

Location(s): Houston, TX, US, 77029 Function: Manufacturing Audience: Hourly Work Arrangement: On Site Requisition ID: 68732 Maintenance Mechanic 3rd Class Job Description Job Title:Maintenance Mechanic 3rd - Class Department:Maintenance Reports to:Maintenance Leader Pay: $32.15 Supervises:N/A FLSA Status:Non-Exempt Date:9/18/23 SUMMARY The purpose of the3rd class mechanicisto perform as professional, highly skilled and exceptionally competent maintenance person. Participates in teams to develop and implement solutions. JOB DUTIES AND RESPONSIBILITIES PRINCIPAL DUTIES AND RESPONSIBILITIES: Plant and Environmental Safety • ___Lives the Owens Corning Safety Stand and meets all safety requirements. Safety is a condition of employment., • Take personal ownership to work safely and hold other team members to the same high standards of safety, • Notify supervisor immediately of any accident, near miss or on- the -job injury when it occurs no matter how insignificant it may seem., • Participates in the safety, quality, autonomous maintenance, TPM and housekeeping programs as established within the plant; including but not limited to Focused Improvement Events, Safety Committee, Training, etc., • Performs job tasks to reduce environmental impact and adheres to the environmental regulations and recycling procedures for waste disposal., • Complies with all plant rules and safety regulations., • Performs cleanup duties at workstations and/or equipment/machinery., • Communicates safety concerns and/or equipment problems/abnormalities to appropriate personnel, maintaining strong communication with the appropriate line section operators to ensure immediate action is taken for product out of spec., • Inspect vehicles before use and throughout shift, keeping all equipment clean and operational. TPM • Participates in plant TPM initiatives - completing activities associated with TPM tasks (adheres to CILT standard, 5S)., • Continues to use TPM methodology to gain a better understanding of the equipment., • Identifies and participates proactively in learning opportunities and develops expertise in those areas., • Utilizes Focus Improvement tools to problem solve., • Works to achieve zero injuries, zero defects and zero losses., • During PM days, uses time effectively to bring equipment to optimal condition for zero losses., • Maintain DM and Step Boards. Maintenance • Energy Control Procedures (ECP's) and Lock Tag Try (LTT) system. Respect for the potential hazards within the manufacturing operation. Training and regular auditing of the process., • Fluent in the language of the plant., • Computer literacy - email, simple spreadsheet, word doc., • Safe rigging procedures., • Forklift operation, licensed - will provide certification., • PLCbasics -- Ability to identify key components of a PLC and describe their function, • Troubleshooting basics, how to analyze a problem and step to the root cause. Help reduce cycle time to problem resolution and eliminates the "replace and see what happens method"., • Process 101 - Basic concepts of what it takes to consistently manufacture shingles. Critical product characteristics, key process variables, customer needs etc., • Business 101 - World Class Manufacturing (WCM) concepts, what are they, individual and business benefits. Key business metrics and focus., • Installs, modifies or maintains plant equipment and assists in determining appropriate methods to accomplish these tasks., • Must work safely and follow all documented and "common sense" safety policies and procedures., • Read, understand, and analyze blueprints and other technical data references., • Expert use of hand and power tools., • Inspects plant equipment to identify potential problems prior to breakdown occurrences., • Complies with good housekeeping practices on the job and insures work areas are clean and picked up after each job completion., • Follows all environmental compliance polices & programs., • Work as instructed with outside contractors. Mechanical • Ability to properly precision align belt, gear or direct coupled shafts using proper tools to specified tolerances., • Understanding of lubrication principles and bearing tolerances and basic bearing "physics"-I.E. how does it work in terms of need for extreme care, keeping clean, etc., • Hydraulic systems understanding - identify and describe the function of hydraulic components, • Same as above for compressed air and steam, (where applicable) systems., • Understanding of pump basics and operating characteristics including effects of suction pressures, head pressures, sealing/packing techniques., • Ability to track conveyor belts properly and understanding the physics of belt operation and tracking including bucket elevators; belt splicing., • Ability to read air and power fluid schematics., • Basic welding for all; structural and piping welding for at least one craft per plant., • Pipefitting - alignment, flange, threading., • Basic electrical component "how they work" understanding: solenoids, motors, heaters, contacts, and photoeyes., • Ultrasonic rotating equipment troubleshooting. Electrical • Basic industrial electrical code., • Capability to read schematics and P&ID drawings., • Fusing, thermal overload protection, wire sizing, motor theory, etc., • AC, DC and Servo drive system (basics)., • Be able to safely conduct motor control and power circuit troubleshooting. Understand fuse sizing, take motor amp readings, understand basic DC motor control, etc., • Ability to fully understand the various control loops in the plant including IM/APC systems and weight control equipment., • Burner system understanding, troubleshooting and properly tuning Other • ___Demonstrate the ability to effectively communicate., • Support the training and development of colleagues., • Demonstrates flexibility to changing priorities as business needs dictate., • Identifies and participates proactively in learning opportunities, and develops expertise in those areas., • Follows standard operating procedures and processes., • Can and is willing to make decisions. Knows the chain of command to get support., • Regular Attendance on site and the ability to rotate varying shifts., • All other duties as assigned or needed. ___JOB REQUIREMENTS SKILLS AND ABILITIES The employee should hold the following skills and abilities: • ___Demonstrated desire to impact safety, • Must be able to work independently or in a team atmosphere with minimal direct supervision, • Demonstrated mechanical aptitude and the ability to troubleshoot, • High attention to detail, • Demonstrated ability to multi-task, • Basic mathematics skills, • Able to effectively communicate (read, write, speak, understand) English, • Basic Electrical, • Basic PLC, • Basic Hydraulic, • Basic Pneumatics, • Basic Blueprint & Schematic reading, • Proficient in SAP PM Module ___COMPUTER AND SOFTWARE COMPENTENCIES The employee must be able to: • Work with a computer to perform basic data entry, • Demonstrate basic computer skills such as___Microsoft Outlook, IVC and SAP. EDUCATION AND/OR EXPERIENCE • High School Diploma or GED Equivalent required., • Manufacturing or process related experience preferred., • Preferably five (5) years in a related maintenance trade or occupation that involved electrical, hydraulic machinery and equipment in a manufacturing environment., • Able to demonstrate trouble-shooting techniques and have a basic understanding of blueprints., • Basic ability and knowledge of welding practices and hydraulic circuitry., • Advanced understanding of electrical circuitry., • Basic PLC knowledge., • Must have the ability to interpret instructions furnished in written, oral, diagram or schedule form., • Flair for working with large industrial machines., • Must be able to work independently or in a team atmosphere with minimal direct supervision with drive toward accomplishment, and to produce high quality work. ESSENTIAL PHYSICAL REQUIREMENTS/WORK ENVIRONMENT • ___Must remain drug free, • Exposure to dust/dirt/fumes/fiberglass, • Ability to work in wet environments: including head and feet, • Industrial manufacturing environment with extreme temperature variation, • Exposure to sounds or noise levels that maybe uncomfortable (hearing protection is provided), • Ability to wear applicable PPE for up to 12 hours, • Ability to distinguish colors and shading, • Ability to become certified to operate a forklift, • Prolonged sitting, standing, or walking for 8 - 12 hour shifts, • Bending and twisting; repetitive movements, • Able to do repetitive hand, arm, leg movements for up to 12 hours, • Must be able to squat, bend at the waist and knees freely, • Be able to climb up to three floors or stairs, use full upper body movement for process; stand up to 12 hours with breaks, • Ability to work from heights, • Lift, push and pull 40lbs.repetitively, • ___Handle, control, feed, or feel objects, tools or product, • Must be able to work flexible rotating shift schedules - mandatory overtime as required This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, and abilities. This document does not create an employment contract, implied or otherwise, other than an "at will" relationship. Nearest Major Market: Houston

Service Wire is a premier manufacturer of industrial, utility, and commercial wire and cable.Our regional manufacturing location in Houston is seeking a conscientious and team-oriented Material Handler with proficiency with high-reach forklifts to join our organization in this full-time position.Ess

Job Description Overview SP+, a Metropolis company, is an artificial intelligence company for the real world. We use computer vision to enable checkout-free parking experiences. So there’s no fumbling with tickets, machines, apps, or credit cards. You just “drive in and drive out.” We are the largest parking network in America, with over 23,000 employees powering mobility at over 4,000 locations across North America and Europe. Today, we are reinventing parking. Because it’s important, it's everywhere and impacts everyone. Tomorrow, we will power checkout-free experiences anywhere you go to make the everyday experiences of living, working, and playing remarkable - giving us back our most valuable asset, time. Responsibilities What you’ll do • Deliver on Our Promise by ensuring every moment matters for our clients by providing assistance when needed and communicating proactively., • Direct incoming customers to available parking spaces for a seamless parking experience., • Count vehicles on location throughout shift, as needed., • Write and issue violation warnings to tenants and visitors that violate garage policies; patrol transient and reserved parking levels as needed., • Provide assistance to customers that have forgotten where they parked their vehicle., • Responsible for being at work every scheduled day, on time and in uniform., • Control traffic at entrances and exits as needed., • Assist in the maintenance and repair of parking equipment and any general maintenance tasks as directed by the Facility Manager., • Report any known accidents, observed or suspected violations of Company policy, safety hazards or any unusual occurrence to the Facility Manager., • Communicate debris, water, oil spills and etc. to garage office., • Substitute for Valets when necessary, if authorized., • Have a thorough knowledge of all areas of the garage, thorough knowledge of the major streets, landmarks and freeways in the area of the garage to assist customers in a seamless transportation experience., • Assist Facility Manager with other duties as needed. Qualifications What you need • A valid state driver’s license, current address, and acceptable driving record., • The ability to safely drive a vehicle with a manual transmission (stick shift) is a plus., • Availability to work special shifts if needed (2nd, 3rd shift and/or weekends)., • Proof of eligibility to work legally in the U.S. (must provide valid documentation if hired)., • The ability to provide accurate information to customers and co-workers and respond professionally to customer problems or complaints., • The ability to read, write, add, and subtract US currency and comprehend instructions, short emails, and memos., • The ability to follow written and verbal instructions and calmly adapt to changes, delays, and unexpected events while working. Salary Range: $15.00 per hour (+ tips) This role is eligible to earn tips in addition to the posted hourly rate. Benefits: Eligible employees will participate in the various benefits plans including medical, dental, vision, flexible spending accounts, long/short term disability, life insurance, accident insurance, 401k and paid time off. SP+ is an equal opportunity employer committed in policy and practice to recruit, hire, train, and promote, in all job classifications, without regard to race, color, ancestry, religion, sex, age, national origin, citizenship status, marital status, sexual orientation, veteran status, gender identity, disability or other classes protected by federal or state law. SP+ does not tolerate harassment or retaliation against any employee or applicant based on these characteristics or because the individual exercised their EEO rights. Right to Work Poster SP+, a Metropolis Company, may utilize an automated employment decision tool (AEDT) to assess or evaluate your candidacy for employment or promotion. AEDTs are used to assist in assessing a candidate’s application relative to the required job qualifications and responsibilities listed in the job posting. As part of this process, SP+ retains data relevant to your candidacy, including personal information, for a period that is reasonably necessary for the use of the tool. If you are hired for the position, your data may become part of your employee records. If you are an applicant to a New York City job posting and wish to request an alternative selection process accommodation or have questions about our data retention policy, please contact . We are here to assist you.

Job DescriptionDISTRICT MAINTENANCE TECHNICIANFacilities Maintenance Supervisor Full Time, Salary Job Family: Maintenance Location: 2800 E Broadway St Pearland, TX 77581 Reports to: VP of Facilities Looking for a district maintenance technician who will be responsible for providing a high quality of service to assigned locations and fast solutions to a wide range of facility and equipment maintenance needs at Crunch Fitness - Undefeated Tribe. Undefeated Tribe is an official franchise of Crunch Fitness based in Austin, TX. The Undefeated Tribe is the fastest growing franchise group and is expanding the Crunch Fitness brand across Texas, Oklahoma, New Mexico and Missouri. The Undefeated Tribe was named Franchise of the Year in 2021 and 2024 and will be inviting over 1000 individuals to join our team to help our community experience fitness, wellness, relaxation, and recovery. From our clubs to headquarters, Undefeated Tribe is a collaborative, fast-paced, and engaging place to work. It’s vital to our success to continue to take risks and think big. This takes tons of hustle, creativity, and boldness. The Undefeated Tribe strives to enrich the lives of others through the power of well-being. Position Overview The district technician is a task-oriented individual who appreciates high standards of excellence and is committed to maintaining a clean, crisp, and inviting environment at Crunch. The district technician is expected to perform regular maintenance duties necessary to maintain the functionality and condition of all fitness equipment, amenities, and overall appearance of assigned clubs. Oversight for 3rd Party vendors, to include specialty work, emergency resolution, and scheduled maintenance support. Responsibilities • Perform club walk-through to ensure the condition of assigned clubs are upheld to ensure a positive member experience that represents the Crunch Fitness brand, • Maintain and update internal online work order program, recording and maintaining a schedule of historical repair needs for each club. All work orders to be updated on a daily basis, • Identify, repair and maintain fitness and spa equipment for proper use and safety according to Crunch guidelines, • Manage and control parts inventory per assigned clubs with accurate records of parts used or exchanged, • Manage daily/weekly reporting and follow expected weekly club visit schedule, • Train and support club team management to perform Level 1 facility and equipment repair, • Solicit bids and quotes from vendors and dispatch contractors to repair and maintain facilities, • Evaluate contractors work to ensure proper repairs were made after service calls, • Act as liaison to property management for facility repairs or upkeep requiring their attention, • Regular preventative maintenance of all fitness, spa equipment per manufacturer recurring schedule guidelines, • Track all preventative maintenance information within internal online work order program, • Hire, train, and develop preventative maintenance technicians, • 2 years minimum experience in building maintenance or retail maintenance required, • Knowledge of carpentry, plumbing, electrical and HVAC systems required, • Ability to communicate effectively and use office equipment including a computer, • Must be 18 years of age or older, • Ability to bend, lift, and carry in excess of 100 lbs, • Continual standing and walking during shift High school diploma or GED preferred Compensation (Salary) $45,000 - $55,000 depending on experience Benefits • PTO, • Subsidized health insurance coverage (health, dental, vision) for full time positions, • Basic Life and AD&D, • HSA, • Short-term disability Up to 100% travel required Travel Details Travel required to support geographical areas. Schedule is based on the needs of the business and with the ability to travel to clubs in assigned territory. EQUAL OPPORTUNITY EMPLOYER UDT is an Equal Opportunity Employer, a drug-free workplace, and complies with ADA regulations as applicable. UDT provides equal employment opportunities to all employees and employment applicants and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Please note that Crunch Fitness - Undefeated Tribe does not offer visa sponsorship or support visa transfers for this position. Applicants must be authorized to work in the United States without the need for current or future visa sponsorship. At Crunch Fitness - Undefeated Tribe, we are always on the lookout for exceptional talent to join our team. Some of the roles listed are part of our evergreen hiring strategy, meaning we consistently seek to build a pipeline of qualified candidates. While not all positions may be actively hiring at this time, we encourage you to apply if the role aligns with your career goals. Your application will be considered as opportunities become available. Join us in making Crunch Fitness the talk of the town! Apply now and be a driving force in transforming lives through fitness.

Job DescriptionDescription: 3rd Shift (11pm-7:30am) Position Purpose: To support plastic production through setting molds, loading resin, setting up work stations and helping to establish process parameters per master control plants as well as assisting others in the support of manufacturing. Job Responsibilities: • Removal of molds and lead changeover activities, • Assisting shift supervisor in supporting multiple machines through monitoring operators, • Handling and sorting of production parts, fixtures and components, • Basic monitoring of production process, • Maintaining and cleaning the machine and work area, • Providing breaks for operators Expectations: • On-time and dependable attendance, • To complete simple machine adjustments, • To have the ability to discern good and bad parts, • Ability to provide accurate part counts, • To be able to maintain multiple machines and support multiple operators in basic functions Requirements: Qualifications: Education: • Positive can do attitude, • Ability to speak and write English, • Ability to sit or stand for extended periods of time and climb ladders, • Proficient mathematics, • Good interpersonal skills both written and verbal, • Shows good judgement, • Ability to work independently and handle projects to completion, • Ability to lift 55lbs

Job DescriptionFoxconn Industrial Internet (Fii USA, Inc.) is seeking a Forklift Operator to support its warehouse and manufacturing operations. This role is part of the Warehouse Department and is critical to maintaining efficient material handling and inventory accuracy The Forklift Operator will transport materials safely, maintain inventory accuracy, and perform equipment inspections while assisting the Warehouse Department as needed. Current open shifts: 1st shift- 6:00am-2:00pm 2nd shift- 2:00pm to 10:00pm 3rd shift- 10pm-6am Job Responsibilities: • Operate various types of forklifts (stand-up, sit-down, reach trucks) to efficiently load, unload, move, and store products while maintaining precise control and safety standards, • Transport goods throughout the warehouse facility and coordinate with shipping/receiving for smooth truck loading and unloading operations, • Conduct daily equipment inspections including fluid levels, tire condition, battery charge, and safety features; document and report maintenance needs according to company protocols, • Maintain inventory accuracy through careful scanning, labeling, and documentation of all product movements using RF scanners and warehouse management system, • Optimize warehouse space utilization by implementing safe stacking patterns and maintaining organized storage zones while adhering to weight limits and compatibility requirements, • Strictly follow OSHA safety guidelines, company policies, and proper PPE requirements while maintaining a clean and hazard-free work environment, • Support cross-functional warehouse operations including order picking, packing, cycle counting, and assisting with training new operators, • Report and document any damaged or defective goods through proper channels, • Participate in regular safety meetings and contribute to continuous improvement initiatives for warehouse efficiency, • Assist in seasonal inventory counts and special projects requiring material handling expertise, • Fast-paced, high-volume warehouse and manufacturing operations, • Maintain cleanliness of equipment and assigned work areas, including charging stations and storage zones within the warehouse, • High School Diploma or equivalent required, • Able to pass our internal Forklift Certification Program within the first 90 days, • Minimum 2 years of forklift operation experience preferred, • Forklift certification preferred, • Must be able to lift up to 50lbs and stand/walk for extended periodsBenefits:, • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Vision insurance, • Paid holidays Powered by JazzHR c4Gdfufphc

Job Description Maintenance Technician/Mechanic Ingenia Polymers is a world-class, fast-growing, global company looking for people that have the passion to lead, the desire to grow, and the ability to create and deliver solutions for our customers. We offer an environment that is innovative, diverse, intellectually stimulating, and unique. We are searching for exceptional, detailed oriented with strong analytical and interpersonal skills to perform the role of Mechanic/Maintenance Technician, at our Houston or La Porte, Texas US manufacturing facility.  Must be able to work in hot and cold environments for extended periods of time.  Must be able to work from multiple body positions: (kneeling, stooping, bending over, overhead work, working off a ladder, climbing a ladder, lying underneath equipment).  Must be able to bend and lift 50lb and 75lb.  Must have at least 2 years prior maintenance experience as a maintenance industrial maintenance mechanic/industrial maintenance technician.  All maintenance positions here at Ingenia are multi-craft. Meaning a person applying for any maintenance positions with Ingeina and has a heavy mechanical background must be willing to learn and or perform light to medium duty non-energized electrical work as needed. A person with a heavy industrial electrician background must be willing to learn and or perform light to medium duty mechanical work as needed. Absolutely no one will ever be put in an unsafe situation or a situation that they are not comfortable with due to lack of experience.  All applicants must have and maintain a positive attitude, strong work ethic, must be open minded, must be able to work in a fast paced environment, must show the initiative learn the plant’s equipment and process to improve themselves as an Ingenia maintenance mechanic/technician, be willing to learn and or work as a multi-craft maintenance mechanic/technician, must be willing to assist other maintenance mechanics/technicians as needed, work with contractors as needed, perform miscellaneous tasks around the plant facilities as needed, must be able to work 1st, 2nd and 3rd rotating shifts depending on plant needs, be able to work weekends on a rotating shift and be available to respond to callouts for on call weekend coverage that is also a rotating shift.  NCCER certificate as a millwright, NCCER certificate as an industrial electrician or Texas electrical journeyman license is preferred but not required. Additional experience in welding or machining on top of their mechanical or electrical background is a plus.  Applicants with maintenance experience in the plastics industries and or twin screw extrusion is a plus.  Applicants with SAP experience in creating work orders, parts management and timecard entries is a plus.  Applicants with millwright or mechanical backgrounds must have knowledge of using hand tools, power tools, pneumatic tools, calipers, filler dial indicators, plumb bob, squares, levels, protractor, center punch, pry bars, various types of wrenches, pullers. Perform preventive maintenance per schedule. Must have knowledge of removing, rebuilding, installing, maintaining and performing alignments on electric motors, compressors, gearboxes, gear/motors, centrifugal pumps, gear pumps, couplings, sheaves, sprockets, and drive belts, various sizes of roller chain, ball bearings, roller bearings, various types of seals, and various types of gaskets, able to bolt up various sizes of flanges properly. Knowledge of disassembly and reassembly of extruder barrel sections, screw shafts, screw elements is a plus. Must be able to cut, thread and install screw pipe properly. Must be able to locate equipment literature when needed. Must be able to read, interpret and work from equipment, structural and hydraulic drawings. Must be able to document all tasks, fill out and turn in jobs sheets after each job, check and send communication emails, enter documentation on work orders and enter time cards. Knowledge of SAP is a plus. Any additional hydraulic, electrical, welding or machining knowledge/experience is a plus.  Applicants with electrical backgrounds must have knowledge of using hand tools, power tools, knock out set, tubing benders, conduit benders, crimping tools, amp meters, voltage meters, megohmeter, ECT. Must have knowledge of installing, troubleshooting and maintaining motors, motor controls, motor starters, AC and DC control systems, solenoid valves, relays, 120VAC, 277VAC and 460VAC lighting fixtures and lighting circuits. Perform preventive maintenance per schedule. Must have knowledge removing, installing, and wiring single phase and three phase 120VAC, 230VAC, 460VAC, 575VAC, 4160VAC and 700VDC electric motors. Must be able to read, interpret and work from equipment and electrical drawings and schematics. Knowledge of troubleshooting, installing and programming drives/VFD’s and soft starters. Must be able to install rigid, EMT and PVC conduit per NEC code. Must be able to scope small projects with little or no assistance. Must be able to install wiring and properly size cable/wiring as well as properly size raceways/conduit and conduit body fill percentages per NEC code. Knowledge of single phase and three phase electric heaters. Knowledge of various types of instrumentation (pressure, temperature, speed sensors, level sensors, load cells, load cell summing boards, load cell transmitters). Must be able to document all tasks, fill out and turn in jobs sheets after each job, check and send communication emails, enter documentation on work orders and enter time cards. Knowledge of SAP is a plus. Any additional mechanical, hydraulic, welding or machining knowledge/experience is a plus.

Job Description Overview SP+, a Metropolis company, is an artificial intelligence company for the real world. We use computer vision to enable checkout-free parking experiences. So there’s no fumbling with tickets, machines, apps, or credit cards. You just “drive in and drive out.” We are the largest parking network in America, with over 23,000 employees powering mobility at over 4,000 locations across North America and Europe. Today, we are reinventing parking. Because it’s important, it's everywhere and impacts everyone. Tomorrow, we will power checkout-free experiences anywhere you go to make the everyday experiences of living, working, and playing remarkable - giving us back our most valuable asset, time. Responsibilities Basic Function - Ensure that appropriate number of cars is kept on location throughout shift, cars are being parked in an appropriate fashion and the lot is kept clean and presentable. • Direct incoming customers to available parking spaces., • Count vehicles on location throughout shift, as needed., • Write and issue violation warnings to tenants and visitors that violate garage policies., • Patrol transient and reserved parking levels on foot or in customized motor carts, if applicable., • Provide assistance to customers that have forgotten where they parked their vehicle., • Responsible for being at work every scheduled day, on time and in uniform., • Courteously assist Customers by answering any questions they may have. If necessary, direct the Customer to the Facility Manager for further assistance., • Control traffic at entrances and exits as needed., • Assist in the maintenance and repair of parking equipment and any general maintenance tasks as directed by the Facility Manager., • Report any known accidents, observed or suspected violations of Company policy, safety hazards or any unusual occurrence to the Facility Manager., • Communicate debris, water, oil spills and etc. to garage office., • Substitute for Valets when necessary, if authorized., • Have a thorough knowledge of all areas of the garage, thorough knowledge of the major streets, landmarks and freeways in the area of the garage., • Assist Facility Manager with other duties as needed. Qualifications Qualification Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience Required: Less than High School education or one month related experience, training or an equivalent combination of education and experience. License Requirement: The individual will only be required to have and maintain a valid state-issued driver’s license, with a current address and acceptable driving record, if the individual is expected to be able to drive a company vehicle or drive on company business. Availability to Work: Special shift requirements, if any, will vary depending on a location's hiring needs. If applicable, availability to work 2nd shift, 3rd shift and/or week-ends may be required. Language Skills: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one situations to customers and other employees of the company. Mathematical Skills: Ability to add, subtract, two digit numbers and multiply and divide with 10’s and 100’s. Ability to perform these operations using units of American money. Appearance: Employees will be required to maintain a neat and clean appearance and be in complete uniform at all times. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; and use hands to handle cash and equipment. The employee is occasionally required to sit and climb or balance. The employee must occasionally lift and/or move up to 25 pounds. Salary Range: $11.00 per hour Benefits: Eligible employees will participate in the various benefits plans including medical, dental, vision, flexible spending accounts, long/short term disability, life insurance, accident insurance, 401k and paid time off. SP+ is an equal opportunity employer committed in policy and practice to recruit, hire, train, and promote, in all job classifications, without regard to race, color, ancestry, religion, sex, age, national origin, citizenship status, marital status, sexual orientation, veteran status, gender identity, disability or other classes protected by federal or state law. SP+ does not tolerate harassment or retaliation against any employee or applicant based on these characteristics or because the individual exercised their EEO rights. Right to Work Poster SP+, a Metropolis Company, may utilize an automated employment decision tool (AEDT) to assess or evaluate your candidacy for employment or promotion. AEDTs are used to assist in assessing a candidate’s application relative to the required job qualifications and responsibilities listed in the job posting. As part of this process, SP+ retains data relevant to your candidacy, including personal information, for a period that is reasonably necessary for the use of the tool. If you are hired for the position, your data may become part of your employee records. If you are an applicant to a New York City job posting and wish to request an alternative selection process accommodation or have questions about our data retention policy, please contact . We are here to assist you.

ESSENTIAL DUTIES AND RESPONSIBILITIES: Responsible for training, guidance, and enforcement of compliance to SQF certification Maintain safety, policies, rules and regulations as well as Good Manufacturing Practices (GMP's) Manage the flow of product from the kitchen through the packaging lines to th

Frontend Development Engineering Supervisor Pemex Deer Park is a highly complex refinery located 18 miles east of Houston in Deer Park, TX. It is part of the PEMEX group, a fully integrated oil company in the Americas, working across the entire value chain: exploration, production, industrial processing/refining, logistics, and marketing. PEMEX Deer Park provides a diverse and inclusive work environment that employs approximately 1000 employees with another 1200 contractors on site. The refinery’s rated capacity is 340,000 barrels per day and has the feed flexibility to process multiple grades of crudes to produce the high-quality transportation fuels the world needs. The PEMEX Deer Park site is co-located with other 3rd party chemical facilities allowing for further integration and optimization of the refinery and its products. We set high standards of performance and ethical behaviors and offer challenging and fulfilling job opportunities in a number of fields. We take great pride in our ability to ensure the health and safety of our workers and the environment while being a good neighbor and positively impacting the local community where we work. As the Front End Development Engineering Supervisor, you will supervise 5 Frontend Development Engineers and lead the development of project conceptual design (FEL 1/FEL 2), justification, alternative analysis, and implementation to improve safety, environmental, reliability, margin, and energy performance, and profitability within the PEMEX Deer Park Refinery. In addition, you may support special studies and provide or assign supplemental process engineering support to the operations or project organizations when warranted. Your Responsibilities as the Frontend Development Engineering Supervisor will include: • Provide strategic and tactical leadership for the team., • Ensure team members meet the expectations of the Frontend Development Engineering job description through motivating, coaching, and role-modeling ‘what good looks like.’, • Works with team members to build and sustain a high-performance team and minimize turnover., • Always understand team members’ availability and work closely with the Portfolio Manager and Project Engineering Supervisors to prioritize and assign projects accordingly., • Work collaboratively and effectively with other project community leaders, i.e., project services, project engineering, discipline engineering, etc., • Execute process studies or detailed engineering analysis for projects that include capacity expansions, improvements to safety, environmental and reliability performance, product changes, process optimization, and other design changes in an operating facility., • Integrate input and consultation from customers/stakeholders and technical and business organizations to ensure projects are fit-for-purpose., • Coordinate process engineering interface with third-party engineering for relevant projects/studies., • Ensure that the project scope is well-defined and meets the business needs cost-effectively., • Develop the project scoping of an investment opportunity through concept selection (Identify/Assess/Select Phases) to ensure a smooth transition to the Define Phase., • Provide an overview and technical assurance of contractors’ process deliverables, with guidance from the Department Manager as needed., • Support the Project Engineer in developing project scope, cost, schedule, and execution strategy (FEL3) as needed., • Work in a seamless and integrated manner with Projects and Discipline Engineers., • Participate in the Management of Change (MOC) activities for projects, providing technical assurance and process knowledge. This includes safeguarding analysis, risk assessments (e.g., HAZOP, PHA), alarm reviews, and Pre-Start Up Safety Reviews (PSSRs)., • Provide risk-based assurance on the quality of the safety barriers or controls, making prioritized observations and recommendations to the Project Team to act upon for further improvement., • Develop technical and scope documents to support process engineering oversight of assigned projects., • Serve as a Technical Authority (accountable for being knowledgeable of internal/external standards and best practices), reviewing and providing approval of project design from the process engineering perspective., • Provide additional technical support (e.g., turnaround support for projects, high-impact operations events)., • This is a rotating shift role To thrive, you should have: • A minimum Bachelor of Science degree in Chemical Engineering (or equivalent) is required., • Two plus years of frontend development or process engineering supervision experience is preferred., • At least 5 years of process engineering experience in refining or petrochemical operations, with a strong understanding of refinery processes, economic drivers, application of fundamental engineering, and operational practices., • At least 3 years of relevant capital project development or process design experience in refining., • Knowledge of process simulation software (e.g., PRO/II, UniSim, HYSYS/AspenPlus)., • Experience with process safety design, industry standards, and best practices., • Be knowledgeable in process engineering to serve as a Technical Authority for reviews and approvals of process designs completed by contractors and peer process engineers., • A Technical Authority must have at least 5 years of experience in process engineering (operations support and design) and experience with the Management of Change (MOC) work process knowledge of relevant codes/industry standards and best practices for process/design engineering., • Must possess demonstrated leadership and supervision skills., • Effective communication skills – both verbal and written., • Must possess model interpersonal and professional behaviors., • Physical ability to work around and on industrial equipment, including frequently climbing stairs and ladders., • Ability to wear Personal Protective Equipment (PPE) in designated areas (e.g., hearing protection, hard hat, safety glasses, gloves, and steel-toe shoes/boots)., • Must have legal authorization to work in the US full-time for anyone other than current employer. Benefits: PEMIX Deer Park values our employees’ time and efforts. Our commitment to your success is enhanced by our competitive compensation and an extensive benefits package, including paid time off, medical, dental, and vision benefits, and future growth opportunities within the company. Plus, we work to maintain the best environment for our employees, where people can learn and grow with the company. We strive to provide a collaborative, creative environment where everyone feels encouraged to contribute to our processes, decisions, planning, and culture. We are committed to equal employment opportunity and non-discrimination for all employees and qualified applicants without regard to a person’s race, color, gender, age, religion, national origin, ancestry, disability, veteran status, genetic information, sexual orientation, or any characteristic protected under applicable law.

Req ID:253194 Job Location: 4800 Houston, TX (NorthPoint) Work days/Shift Hours - if applicable: 10:00 PM - 6:30 AM / 5 days a week. Compensation: Starting pay ranges from $19.10 to $24.01 per hour, based on experience. Additional earning opportunities may include performance-based incentives, quarterly bonuses, referral bonuses, and comprehensive benefits. Responsible for moving trailers across lots during loading and related functions. • Conducts a daily check of trailers for raw materials and full goods in addition to assessing for empty trailers and others that need to be relocated or loaded., • Properly stores trailers not being used., • Maintains proper order of customer pick up trailers brought to the docks., • Ensure a complete and accurate list of trailers brought in and moved to the docks., • Ensure that all trailers brought to the docks have their wheels chocked., • Reports problems or damages that occur., • High School diploma or equivalent preferred., • 0 - 3 year of general work experience required., • 1+ year prior warehouse/stocking/fork-lift experience preferred., • Previous experience within high-speed industrial environment a plus., • Ability to operate a manual / powered pallet jack or lift product., • Demonstrated attention to detail., • Fork-lift certification is required, • Must be able to repetitively lift up to 60lbs Know Your Rights ___ Coca-Cola Southwest Beverages LLC is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class.

Warehouse Operator Specialized Forklift.In this role, you will be responsible for operating a 25k Hyster 360 forklift to support production operations, including loading and unloading heavy freight, receiving and stocking materials, preparing component kits, performing cycle counts, and ensuring ac

Penske Logistics is a wholly owned subsidiary of Penske Truck Leasing. Why is Penske Logistics for you?. To learn more visit .

Shift: The current opening is for the 3rd shift "11pm-7:00am.Responsibility includes a full range of computer and peripheral equipment necessary to process seismic data by performing the listed duties.

Why is Penske Logistics for you?. To learn more visit . Willingness to travel as necessary, work the required schedule, work at the specific location required, complete Penske employment application, submit to a background investigation (to include past employment, education, and crimi

Are you able to work overtime/weekends as required?*Choose oneYesNo This field is required.

Job DescriptionGopuff is looking for Operations Associates (OAs) to join the operations team. Directly reporting to a Site Leader, OAs play an essential role at Gopuff that requires drive, perseverance, positivity, and enthusiasm for the challenge. You will accomplish a variety of operations responsibilities including picking, packing, receiving product both within our site and accompanying kitchen (if applicable), and working with our partner drivers. Customers turn to Gopuff to provide their everyday essentials—day and night, rain or shine. We're assembling a team of thinkers, dreamers and risk takers who are ready to help us reshape the world of retail faster than ever before. And it doesn't hurt if you like snacks. Responsibilities: -Pick and pack items for dispatch to customers-Receive and unpack pallets of product from vendors, ensure physical inventory count matches purchase order/invoice, and resolve discrepancies-Manage inventory and re-shelving of canceled orders-Clean and organize sales floor and overall facility-Manage waste and spoilage through strict compliance with FIFO practice-Contact customer for substituted or out-of-stock items-Handle, scan and move product in a safe and well-organized manner-Stand, push, pull, squat, bend, reach and walk during shifts-Use carts, pallet jacks, dollies and other equipment to move product-Handle products that may contain tobacco, nicotine, and/or alcohol-Work in freezer locations periodically throughout shifts-Capability to walk several flights of steps periodically throughout the day-Prepare quality beverages and food menu items for all customers by observing all recipes and presentation standards-Ensure accuracy of all food and beverage packaged for delivery-Follow health, safety and sanitation guidelines for all products-Receive and put away order/invoice, and resolve discrepancies when they do not match expiration requirements-Maintain Kitchen Facility organization and standards to ensure resources can be accessed while managing waste and spoilage through mindful pouring and food preparation-Prepare, package and stage/handoff orders Qualifications:-High School Diploma or GED Equivalent-Experience working in a restaurant or retail environment (preferred, not required)-The ability to work a fluid schedule and be available during peak shifts (1st, 2nd, 3rd shifts)-General working knowledge of basic web-based software applications (e.g. Google G-Suite)-Stand and walk for the duration of an assigned shift-Lift up to 49 pounds-Available to work flexible hours that may include mornings, evenings, weekends, nights and holidays #LI-DNPWhat We Offer • Medical/Dental/Vision Insurance (for full-time employees), • 401(k) Retirement Savings Plan, • 25% employee discount & FAM Membership, • Vacation and Sick Time for eligible employees, • EAP through AllOne Health (formerly Carebridge)Pay: Pay:, • Gopuff pays employees based on market pricing, and pay may vary depending on your location. Compensation for U.S. locations is based on a cost-of-labor index for that geographic area., • Houston, TX: $13.70 per hour

Job Description Overview SP+, a Metropolis company, is an artificial intelligence company for the real world. We use computer vision to enable checkout-free parking experiences. So there’s no fumbling with tickets, machines, apps, or credit cards. You just “drive in and drive out.” We are the largest parking network in America, with over 23,000 employees powering mobility at over 4,000 locations across North America and Europe. Today, we are reinventing parking. Because it’s important, it's everywhere and impacts everyone. Tomorrow, we will power checkout-free experiences anywhere you go to make the everyday experiences of living, working, and playing remarkable - giving us back our most valuable asset, time. Salary Range: $12.00 (+ tips) This role is eligible to earn tips in addition to the posted hourly rate. Responsibilities Position: Valet Driver Location: Cambria Hotel Houston Shift(s): Part-time, Flexible Availability Needed Pay: Base pay of $12/hr plus tips! If you are driven to succeed, you should join SP+. We are looking for safe Valet drivers with warm smiles who enjoy interacting with people. Work with our knowledgeable and caring team members who want to see you succeed, many of whom also started as valets. A job as a Valet could be the first step in your career. Come pave the way with SP+, a company driven by its three core values: Ingenuity, Diversity and Integrity. What you’ll do • Deliver on our Promise by ensuring every moment matters for our clients through resolving client requests and concerns efficiently, finding new ways to solve problems that may arise, and communicating proactively with clients., • Inspect every vehicle before safely parking it, noting all findings., • Explain valet rates to customers., • Observe traffic laws and safe driving practices., • Report all accidents, safety hazards, unusual occurrences, and policy violations to management., • Know the area's major streets, landmarks, and freeways to ensure customers have a seamless transportation experience., • Come to work in your clean uniform every scheduled shift, on time, and ready to work., • Remain in complete uniform for the entirety of your shift., • Assist management with additional duties as assigned. Qualifications What you need • A valid state driver’s license, current address, and acceptable driving record., • The ability to safely drive a vehicle with a manual transmission (stick shift) is a plus., • Availability to work special shifts if needed (2nd, 3rd shift and/or weekends)., • Proof of eligibility to work legally in the U.S. (must provide valid documentation if hired)., • The ability to provide accurate information to customers and co-workers and respond professionally to customer problems or complaints., • The ability to read, write, add, and subtract US currency and comprehend instructions, short emails, and memos. While performing the duties of this job, the employee is regularly required to stand; walk; and use hands to handle cash and equipment. The employee is occasionally required to sit and climb or balance. The employee must occasionally lift and/or move up to 25 pounds. Salary Range: $12.00 (+ tips) This role is eligible to earn tips in addition to the posted hourly rate. Benefits: Eligible employees will participate in the various benefits plans including medical, dental, vision, flexible spending accounts, long/short term disability, life insurance, accident insurance, 401k and paid time off. SP+ is an equal opportunity employer committed in policy and practice to recruit, hire, train, and promote, in all job classifications, without regard to race, color, ancestry, religion, sex, age, national origin, citizenship status, marital status, sexual orientation, veteran status, gender identity, disability or other classes protected by federal or state law. SP+ does not tolerate harassment or retaliation against any employee or applicant based on these characteristics or because the individual exercised their EEO rights. Right to Work Poster SP+, a Metropolis Company, may utilize an automated employment decision tool (AEDT) to assess or evaluate your candidacy for employment or promotion. AEDTs are used to assist in assessing a candidate’s application relative to the required job qualifications and responsibilities listed in the job posting. As part of this process, SP+ retains data relevant to your candidacy, including personal information, for a period that is reasonably necessary for the use of the tool. If you are hired for the position, your data may become part of your employee records. If you are an applicant to a New York City job posting and wish to request an alternative selection process accommodation or have questions about our data retention policy, please contact . We are here to assist you.

Job DescriptionWe’re hiring a Fabricator for our SE Houston client! We are looking for experienced, reliable, hard-working employees who can interview immediately! DESCRIPTION OF YOUR DREAM JOB: • Job Title: Fabricator, • Location: SE Houston, TX 77048, • Pay: 18.00-20.00 DOE, • Hours: M-F 5:00pm-3:00am or 11pm-7am, but will train on days 7:00am-5:00pm for 1-3 months, • Duration: Temp to Hire, • Description of Duties: Operating fusion welding machines to create custom HDPE piping systems and fittings

Job Description Deer Park Refining Limited Partnership (DPRLP) known as PEMEX Deer Park is a highly complex refinery located 18 miles east of Houston in Deer Park, TX, and is a part of the PEMEX group which is a fully integrated oil company in the Americas, working across the entire value chain: exploration, production, industrial processing/refining, logistics and marketing. PEMEX Deer Park provides a diverse and inclusive work environment that employs approximately 1000 employees with another 1200 contractors on site. The refinery’s rated capacity is 340,000 barrels per day and has the feed flexibility to process multiple grades of crudes to produce the high-quality transportation fuels the world needs. The PEMEX Deer Park site is co-located with other 3rd party chemical facilities allowing for further integration and optimization of the refinery and its products. We set high standards of performance and ethical behaviors and offer challenging and fulfilling job opportunities in a number of fields. We take great pride in our ability to ensure the health and safety of our workers and the environment while being a good neighbor and have a positive impact on the local community where we work. BENEFITS: We value our employees’ time and efforts. Our commitment to your success is enhanced by our competitive compensation and an extensive benefits package including paid time off, medical, dental, and vision benefits, and future growth opportunities within the company. Plus, we work to maintain the best possible environment for our employees, where people can learn and grow with the company. We strive to provide a collaborative, creative environment where each person feels encouraged to contribute to our processes, decisions, planning and culture. For more information, please visit our website: PEMEX Job Summary The Production Supervisor (PS) – Utilities / NET is the on-shift leader accountable for safe, reliable, and efficient execution of the daily operating plan for Utilities and NET systems. The PS ensures personnel, equipment, and work processes operate within defined safety, environmental, and process limits while maintaining awareness of site-wide and third-party impacts. This role bridges short-term execution (1–4 shifts) with operator capability development (1 shift–1 year) and serves as the primary on-shift focal point for production delivery, abnormal situation management, and workforce engagement. Accountabilities & Responsibilities: • Owns delivery of the daily operating plan for Utilities / NET, validating threats and constraints and adjusting execution as required to remain within safe operating limits., • Leads, supervise, and coaches on-shift operators, ensuring work is executed as one cohesive team., • Facilitates Shift Team Meetings (STM), ensuring alignment on production targets, equipment readiness, safety protocols, and permitting plans., • Ensures operators understand Utilities / NET operating expectations, system constraints, and impacts to site-wide operations, third-party interfaces, and external customers., • Provides initial leadership response to abnormal situations, ensuring timely stabilization, slowdown, or shutdown actions are executed as required., • Develops and executes short-duration abnormal situation plans (1–2 shift events) and ensures clear communication of recovery plans., • Assures that ESP behaviors are followed and that operators are actively practicing Go Behaviors., • Assures safe and efficient execution of ESP, RCM, permitting, isolation, and return-to-service processes., • Interfaces daily with Production Specialists, Maintenance, Engineering, Safety, Environmental, Operations Management, and external stakeholders as required for Utilities / NET reliability., • Manages on-shift operating resources, labor utilization, and minor discretionary costs to support operating plan and cost targets., • Supervises and coaches’ operators through routine 1:1 discussions; documents development plans, recognition, and gaps in EDL., • Applies structured accountability actions in alignment with HR policies and Union/Management agreements., • Works constructively with Union Stewards to address concerns, reinforce standards, and support positive labor relations., • Identifies operator development needs and partners with the Production Manager, Field Learning Advisors, and SMEs to close gaps., • Ensures mandatory, developmental, and refresher training plans are executed., • The Production Supervisor (PS) is responsible for driving individual and team accountability in alignment with Company HR policies and applicable Union/Management agreements. The PS sets clear expectations, observes performance, provides timely feedback, and addresses gaps through coaching, development, and — when necessary — progressive discipline., • The PS demonstrates fundamental financial and business awareness related to Utilities / NET operations and understands how daily decisions impact cost, reliability, and overall site performance., • Demonstrates data literacy by reviewing and interpreting Power BI dashboards and operational performance reports., • Uses SAP effectively to review notifications, understand work status, and coordinate with Maintenance and Planning., • Understands key Utilities / NET cost drivers including energy efficiency, chemical usage, system losses, and labor utilization., • Demonstrates visible safety leadership and intervenes to prevent unsafe acts or conditions., • Maintains composure and sound judgment during abnormal and high-pressure situations., • Sets clear expectations and holds individuals accountable with consistency and respect., • Promotes a learner mindset emphasizing causal reasoning, continuous improvement, and skill development., • Build trust through transparency, fairness, and follow-through., • Actively engages the workforce and supports morale through recognition and inclusion. Qualifications: Required: • Legal authorization to work in the United States on a full-time basis., • Minimum 10 years of experience in a manufacturing, petrochemical, or refinery production environment., • Demonstrated production leadership or lead operator experience., • Strong verbal and written communication skills., • Console qualification/experience or willingness to learn about the console., • Utilities and/or NET operating experience., • Experience working in a unionized operating environment., • Strong working knowledge of SAP and operational reporting tools., • Ability to qualify and assess operators on multiple Utilities / NET roles., • High school diploma or GED required Education and Experience: • High school diploma or GED required The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be provided to enable individuals with disabilities to perform the essential functions: • Occasional extended work hours during planned and unplanned events.

Job Description Organization UPG Company, LLC Position Quality Control Inspector - 3rd Shift Direct Reports None. FLSA Status Hourly – Non-Exempt (NE) Position Location 7865 Northcourt Rd, Suite #100, Houston, Texas 77040 Website Company Overview UPG is a global manufacturer of complex assembled components and finished products, serving the data center, automotive, energy, and industrial markets. UPG products are sold to over 40 global blue-chip customers, and the company has developed a strong market position based on its technical expertise combined with unparalleled quality, delivery, and service levels. UPG operates three world-class manufacturing facilities – in Houston, Texas; Cardiff, Wales; and Suzhou, China – that offer a complete range of capabilities, including product design, engineering, rapid prototyping, and plastic injection molding, along with a suite of other technology platforms, value-added assembly, and global supply chain management. Reporting Relationship Reports to the Quality Manager Core Function The Quality Inspector ensures all products meet established quality standards and customer specifications by performing precise start-up, in-process, and final inspections in accordance with the Quality Plan. This role requires a highly qualified individual with strong experience in dimensional measurement, blueprint and part drawing interpretation, and the use of precision inspection tools such as calipers, micrometers, gauges, and coordinate measuring machines (CMM). The inspector verifies conformance to specifications, identifies and documents nonconformances, and communicates findings to production and quality teams to support corrective actions, ensuring product integrity and consistent adherence to quality requirements throughout the manufacturing process.. Essential Duties & Responsibilities * Performs thorough start-up, in-process, and final inspections in accordance with the company’s Quality Management System (QMS), customer specifications, and approved procedures. * Conducts precise dimensional inspections using calipers, micrometers, gauges, and CMM equipment to verify product conformance to drawings and tolerances. * Performs inspection of first articles, sample runs, and process/tooling modifications, ensuring accurate documentation and timely feedback to production. * Conducts capability studies and other analytical assessments to evaluate process stability; clearly communicates findings and improvement recommendations. * Interprets part drawings, GD&T symbols, and customer requirements to ensure full understanding of product expectations and critical characteristics. * Regularly reviews inspection instructions and control plans to ensure inspection accuracy and relevance. * Verifies that product labeling and packaging meet all quality and customer requirements before release. * Accurately documents inspection results, nonconformances (NCMRs, VRRs, RMAs), and ensures proper quarantine of nonconforming materials; promptly notifies the Production Supervisor and Quality Manager. * Records inspection data and reports in WIN-CONTROL and other approved systems with accuracy and completeness. * Monitors Statistical Process Control (SPC) trends, identifies out-of-control conditions, and initiates appropriate corrective or containment actions. * Effectively communicates inspection results, quality issues, and relevant shift information to the oncoming inspector and production leadership. * Maintains all inspection equipment in proper working condition, promptly reporting calibration needs, damage, or accuracy concerns. * Assists in training new operators and inspectors to ensure consistent application of inspection standards and quality practices. * Demonstrates leadership, self-motivation, and a high level of attention to detail while promoting a culture of quality and safety throughout the facility. * Adheres to all company safety procedures, policies, and quality standards in every aspect of work. * Provides proactive support to the Quality Manager through accurate reporting, effective communication, and collaboration on quality improvement initiatives. * Actively supports and enforces the company’s Quality Policy, Objectives, and Continuous Improvement initiatives. * Performs other related duties as assigned by the Supervisor or functional managers. Additional Job Information This job description is not designed to cover or contain a comprehensive listing of activities, duties, and responsibilities that are required of the employee for this job. Duties and responsibilities may change at any time with or without notice. Training Requirements ISO Quality Procedures (ISO9001 / AS9100 / ISO13485) Skills Basic computer and math skills to measure specifications. Educational Requirements High School diploma or equivalent General Education Diploma. Experience can be substituted for education. Experience 3 to 5 years of working as a QC Inspector in a manufacturing environment Physical Requirements Light Work – Exerting up to 20 pounds of force occasionally, and / or up to 10 pounds of force frequently, and / or lift, carry, push, pull or otherwise move objects. If the use of arm and / or leg controls requires exertion of force greater than sedentary work and worker sits most of the time, the job is light work. Visual Acuity The worker is required to have close visual acuity to perform an activity such as; preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and or operation or machines (including inspection); using measurement devices; and/or assembly or fabrication of parts at distance close to the eyes. Work Conditions The worker is subject to inside environmental conditions: Protection from weather conditions but not necessarily from temperature change. The worker is subject to noise: There is sufficient noise to cause a worker to shout in order to be heard above ambient noise level. The worker is subject to hazards: Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals. AAP/EEO Statement Equal Opportunity Employer: Disability/Veteran

Job Description Join the dynamic and collaborative team at Katalyst Data Management (KDM)! KDM is seeking a Computer Operator with an understanding of subsurface media types and formats. This is an exciting opportunity to play an integral role in achieving the company’s goals. Qualified candidates will bring strong attention to detail, an ability to work in a fast-paced environment and a great attitude. • Located in Houston, TX USA, • Full-time position, Monday - Friday, • 2nd shift: 2:00 p.m. - 10:30 p.m. Katalyst Data Management (KDM) is the global leader in hosted subsurface data management solutions for the oil and gas industry. From data capture and verification, to data storage and organization, to marketing data online, our specialized data services cater to large multinational corporations, national governments and small independents. KDM’s web-based iGlass services and their related controls, including system redundancy, are key differentiators in providing and maintaining high availability, 24/7 access for customers. Innovation and commitment have enabled KDM to provide excellence in both technologies and service qualities. Key Responsibilities and Accountabilities In this role, you will be responsible for the accurate transcription of E&P data from various media types to digital storage, as well as the outputting of digital data to other media types. The Computer Operator requires a basic knowledge of subsurface data and media formats along with the ability to understand and comply with the individual requirements of each client and project. Key Responsibilities: • Ensure daily goals, as set by supervisor and team lead, are met., • Distinguish between various data formats and media types in order to format/convert subsurface data., • Transcribe data using various media, drives and software., • QC subsurface data against media labels and indexed information., • Initiate communication with computer operator, team lead to report and solve problems related to data or jobs., • Provide client services support by outputting data to specified media in specified format and labeling media according to job requirements., • Update the Work Management Tool with comments and billing information for each job., • Use tape cleaning devices to clean tapes (9-tracks) prior to reading., • Safety first mentality., • Oral and written communication proficiency., • Basic understanding of subsurface media types and formats., • Interacts with people effectively. Able and willing to share and receive information. Co-operates within the group and across groups with a strong emphasis on teamwork., • Attention to detail, accuracy, and completeness. Shows concern for all aspects of the job and follows up on work outputs., • High-school diploma or equivalent., • At least three (3) years working in the E&P industry or related computer science experience., • Knowledge of E&P Data Management requirements and expectations.

Job Description Overview SP+, a Metropolis company, is an artificial intelligence company for the real world. We use computer vision to enable checkout-free parking experiences. So there’s no fumbling with tickets, machines, apps, or credit cards. You just “drive in and drive out.” We are the largest parking network in America, with over 23,000 employees powering mobility at over 4,000 locations across North America and Europe. Today, we are reinventing parking. Because it’s important, it's everywhere and impacts everyone. Tomorrow, we will power checkout-free experiences anywhere you go to make the everyday experiences of living, working, and playing remarkable - giving us back our most valuable asset, time. Responsibilities If you are driven to succeed, you should join SP+. We are looking for safe Valet drivers with warm smiles who enjoy interacting with people. Work with our knowledgeable and caring team members who want to see you succeed, many of whom also started as valets. A job as a Valet could be the first step in your career. Come pave the way with SP+, a company driven by its three core values: Ingenuity, Diversity and Integrity. What you’ll do • Deliver on our Promise by ensuring every moment matters for our clients through resolving client requests and concerns efficiently, finding new ways to solve problems that may arise, and communicating proactively with clients., • Inspect every vehicle before safely parking it, noting all findings., • Explain valet rates to customers., • Observe traffic laws and safe driving practices., • Report all accidents, safety hazards, unusual occurrences, and policy violations to management., • Know the area's major streets, landmarks, and freeways to ensure customers have a seamless transportation experience., • Come to work in your clean uniform every scheduled shift, on time, and ready to work., • Remain in complete uniform for the entirety of your shift., • Assist management with additional duties as assigned. Qualifications What you need • A valid state driver’s license, current address, and acceptable driving record., • The ability to safely drive a vehicle with a manual transmission (stick shift) is a plus., • Availability to work special shifts if needed (2nd, 3rd shift and/or weekends)., • Proof of eligibility to work legally in the U.S. (must provide valid documentation if hired)., • The ability to provide accurate information to customers and co-workers and respond professionally to customer problems or complaints., • The ability to read, write, add, and subtract US currency and comprehend instructions, short emails, and memos. While performing the duties of this job, the employee is regularly required to stand; walk; and use hands to handle cash and equipment. The employee is occasionally required to sit and climb or balance. The employee must occasionally lift and/or move up to 25 pounds. Salary Range: $9.00 - $12.00 per hour (+ tips) This role is eligible to earn tips in addition to the posted hourly rate. Benefits: Eligible employees will participate in the various benefits plans including medical, dental, vision, flexible spending accounts, long/short term disability, life insurance, accident insurance, 401k and paid time off. SP+ is an equal opportunity employer committed in policy and practice to recruit, hire, train, and promote, in all job classifications, without regard to race, color, ancestry, religion, sex, age, national origin, citizenship status, marital status, sexual orientation, veteran status, gender identity, disability or other classes protected by federal or state law. SP+ does not tolerate harassment or retaliation against any employee or applicant based on these characteristics or because the individual exercised their EEO rights. Right to Work Poster SP+, a Metropolis Company, may utilize an automated employment decision tool (AEDT) to assess or evaluate your candidacy for employment or promotion. AEDTs are used to assist in assessing a candidate’s application relative to the required job qualifications and responsibilities listed in the job posting. As part of this process, SP+ retains data relevant to your candidacy, including personal information, for a period that is reasonably necessary for the use of the tool. If you are hired for the position, your data may become part of your employee records. If you are an applicant to a New York City job posting and wish to request an alternative selection process accommodation or have questions about our data retention policy, please contact . We are here to assist you.

Experience in working in production setting a plus, but not required (training provided).

Job DescriptionGopuff is looking for Operations Associates (OAs) to join the operations team. Directly reporting to a Site Leader, OAs play an essential role at Gopuff that requires drive, perseverance, positivity, and enthusiasm for the challenge. You will accomplish a variety of operations responsibilities including picking, packing, receiving product both within our site and accompanying kitchen (if applicable), and working with our partner drivers. Customers turn to Gopuff to provide their everyday essentials—day and night, rain or shine. We're assembling a team of thinkers, dreamers and risk takers who are ready to help us reshape the world of retail faster than ever before. And it doesn't hurt if you like snacks. Responsibilities: -Pick and pack items for dispatch to customers-Receive and unpack pallets of product from vendors, ensure physical inventory count matches purchase order/invoice, and resolve discrepancies-Manage inventory and re-shelving of canceled orders-Clean and organize sales floor and overall facility-Manage waste and spoilage through strict compliance with FIFO practice-Contact customer for substituted or out-of-stock items-Handle, scan and move product in a safe and well-organized manner-Stand, push, pull, squat, bend, reach and walk during shifts-Use carts, pallet jacks, dollies and other equipment to move product-Handle products that may contain tobacco, nicotine, and/or alcohol-Work in freezer locations periodically throughout shifts-Capability to walk several flights of steps periodically throughout the day-Prepare quality beverages and food menu items for all customers by observing all recipes and presentation standards-Ensure accuracy of all food and beverage packaged for delivery-Follow health, safety and sanitation guidelines for all products-Receive and put away order/invoice, and resolve discrepancies when they do not match expiration requirements-Maintain Kitchen Facility organization and standards to ensure resources can be accessed while managing waste and spoilage through mindful pouring and food preparation-Prepare, package and stage/handoff orders Qualifications:-High School Diploma or GED Equivalent-Experience working in a restaurant or retail environment (preferred, not required)-The ability to work a fluid schedule and be available during peak shifts (1st, 2nd, 3rd shifts)-General working knowledge of basic web-based software applications (e.g. Google G-Suite)-Stand and walk for the duration of an assigned shift-Lift up to 49 pounds-Available to work flexible hours that may include mornings, evenings, weekends, nights and holidays #LI-DNPWhat We Offer • Medical/Dental/Vision Insurance (for full-time employees), • 401(k) Retirement Savings Plan, • 25% employee discount & FAM Membership, • Vacation and Sick Time for eligible employees

Job Description Deer Park Refining Limited Partnership (DPRLP) known as PEMEX Deer Park is a highly complex refinery located 18 miles east of Houston in Deer Park, TX, and is a part of the PEMEX group which is a fully integrated oil company in the Americas, working across the entire value chain: exploration, production, industrial processing/refining, logistics and marketing. PEMEX Deer Park provides a diverse and inclusive work environment that employs approximately 1000 employees with another 1200 contractors on site. The refinery’s rated capacity is 340,000 barrels per day and has the feed flexibility to process multiple grades of crudes to produce the high-quality transportation fuels the world needs. The PEMEX Deer Park site is co-located with other 3rd party chemical facilities allowing for further integration and optimization of the refinery and its products. We set high standards of performance and ethical behaviors and offer challenging and fulfilling job opportunities in a number of fields. We take great pride in our ability to ensure the health and safety of our workers and the environment while being a good neighbor and have a positive impact on the local community where we work. BENEFITS: We value our employees’ time and efforts. Our commitment to your success is enhanced by our competitive compensation and an extensive benefits package including paid time off, medical, dental, and vision benefits, and future growth opportunities within the company. Plus, we work to maintain the best possible environment for our employees, where people can learn and grow with the company. We strive to provide a collaborative, creative environment where each person feels encouraged to contribute to our processes, decisions, planning and culture. For more information, please visit our website: PEMEX Job Summary At PEMEX Deer Park, the role of the Graduate Mechanical Engineer is to provide engineering support to the assigned production area and deliver year-on-year improvements to asset integrity and reliability of equipment, ensuring safe operations and sound environmental performance. To accomplish this, the role is empowered to be the owner of static and rotating equipment within their operating units. Accountabilities & Responsibilities: Technical Competence: Key areas for operational equipment competency include: • Rotating Equipment: Pumps, Electric Motors, General Purpose Turbines, Shaft Sealing Systems, Lubrication Systems, Fin Fans, and Blowers, • Static Equipment: Pressure Vessels, Heat Exchangers, Piping Systems, Valves, Relief Devices, Bolted Joint Integrity, and Temporary Repairs., • Budget: Influence budget through proactive identification and prioritization of maintenance expenditures:, • Contributes to the development and delivery of their respective production area’s major maintenance and operational expense budgets., • Monitors spend on maintenance work executed within the production area., • Prepares and submits well-defined work scopes and investment proposals to asset managers and site leadership teams., • Performs life cycle cost analyses to evaluate repair vs. replace alternatives and implement effective and cost-efficient solutions. Delivery: Build strong working relationships with and leverage support from a broad range of stakeholders and peers, including: • Production Team – Asset Manager, Productions Specialists, Operators, Maintenance Supervisor, Inspectors, Process Engineers, and Safety Representative, • Central Engineering – Rotating and Static Equipment subject matter experts, other engineering counterparts in Electrical, Civil, Control Systems and Environmental Engineering., • Maintenance and Turnarounds – Planners, Execution Team Leads, Field Coordinators, and Cost Controllers, • Project Engineering, • Support Functions – Finance Advisor, Capital Planning Focal Point, Contracts & Procurement., • Third Parties – Vendors, Fabrication/Repair Shops, and Engineering Contractors ROLE RESPONSIBILITIES The mechanical engineer is the first point of contact for most mechanical systems in their respective production areas. Below are the key areas of responsibility with core expectations outlined. Operations Support • Work with Operations and Maintenance counterparts to solve day-to-day problems, ensuring safe and reliable unit operation., • Participate in production team meetings to maintain awareness of key activities and unit operating status., • Conduct routine field walkthroughs with operations, maintenance, and inspection to proactively evaluate concerns with equipment and provide recommendations., • Manage Threats and Opportunities (MTO): Identify and prioritize threats and opportunities related to mechanical equipment, utilize problem solving skills to frame potential solutions, and take action to drive resolution., • Management of Change (MOC): Develop technical design bases, provide and facilitate technical assurance and hazard screening of design, assist with maintenance planning and execution activities, lead pre-startup safety reviews, and verify change close-out activities., • Reliability Centered Maintenance (RCM): Manage and continuously improve asset care strategies for both fixed and rotating equipment using consistent methodologies and a standardized approach., • Maintenance Execution (ME): Drive compliance for critical planned maintenance, review deferral justifications, and seek optimization opportunities., • Leverage technical acumen to outline the detailed scope of changes to mechanical equipment. Assure compliance with industry standards and company design practices for all plant changes., • Assess health of Mechanical Equipment by utilizing:, • Ensure Safe Production (ESP) – Review production unit shift reports, assess design operating window exceedances., • Manage Equipment Care (MEC) – Support completion of compliance inspections and implementation of asset care strategies for mechanical equipment., • Proactive Technical Monitoring – Review exceptions from Operations sensory rounds, assess vibration and oil sample analysis results, and recommend proactive corrective actions., • Champion the causal reasoning mindset within the area production team., • Perform investigations on failures related to mechanical equipment bad actors., • Seek to understand the root cause of failures and mitigate findings with robust solutions to prevent reoccurrence., • Participate in delivery of the multi-year major maintenance plan for the production area. Ensure it is credible, competitive, affordable, and drives year-on-year improvement with regard to asset integrity, reliability, and profitability., • Provide updates on current project statuses and upcoming work scopes to relevant stakeholders. Contribute to decisions that prioritize the best interests of the site. (Note – turnaround-related tasks can vary based on assigned production area) • Support work scope development and field execution for mechanical equipment, • Coordinate mechanical equipment surveillance., • Participate in production unit pre-startup safety reviews and commissioning activities. KEY CHALLENGES • Able to leverage technical, project management, and interpersonal skills to drive work items., • Able to prioritize a high workload within the production team., • Able to work independently with minimal supervision while completing work deliverables with a high level of detail and quality., • Able to work at all levels of the organization and have the appropriate skills to influence others in the organization. ROLE REQUIREMENTS • Must have legal authorization to work in the US on a full-time basis., • Excellent troubleshooting, analytical, verbal, and written communication skills, with the ability to interface with personnel from diverse backgrounds at all levels of the organization. Proven ability to manage and prioritize multiple projects., • Demonstrated skill in working with teams to achieve a common goal. Qualifications: PREFERRED QUALIFICATIONS • Prior experience in support of general-purpose static and/or rotating equipment., • Prior experience with concepts related to maintenance and reliability, risk assessment, Management of Change, and structured problem solving., • Awareness of industry codes and standards, and their application within the refining and petrochemical industries. Job Knowledge, Skills & Experience Education and Experience: • Bachelor’s degree in mechanical engineering. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions: • Lifting requirements of 25 lbs., • Walking distances of up to a mile, • Climbing portable and vessel ladders to elevations over 100 feet, • 25-50% of work is performed in an outside petrochemical manufacturing environment., • Occasional extended work hours during planned and unplanned events.

Job Title: (3rd Shift Weld / Manufacturing Engineer) Are you a [Manufacturing Engineering] professional seeking a dynamic and rewarding opportunity? Our client, a leading company in [Automotive Industry], is looking for a talented [3rd Shift Weld / Manufacturing Engineer] to join their growing team