Carpentry jobs in Houston, TexasCreate job alerts

Additional Information Job Number25164722 Job CategoryEngineering & Facilities LocationHouston Marriott Medical Center/Museum District, 6580 Fannin Street, Houston, Texas, United States, 77030___ ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display thorough knowledge of building systems, emergency response, and building documentation including reading standard blue prints and electrical schematics concerning plumbing and HVAC. Display advanced engineering operations skills and general mechanical ability. Display professional journeyman level expertise in at least three of the following areas with basic skills in the remaining: air conditioning and refrigeration, electrical, plumbing, carpentry and finish skills, mechanical, general building management, pneumatic/electronic systems and controls, and/or energy conservation. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Perform routine inspections of the entire property, noting safety hazards, lack of illumination, down equipment (such as ice makers, fans, extractors, pumps), and take immediate corrective action. Inspect and repair all mechanical equipment including, but not limited to: appliances, HVAC, electrical and plumbing components, diagnose and repair of boilers, pumps and related components. Use the Lockout/Tagout system before performing any maintenance work. Display thorough knowledge of maintenance contracts and vendors. Display advanced knowledge of engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers (e.g., Engineers I, II, and III) as necessary and supervise work in progress and act in a supervisory role in the absence of supervisors and/or management. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers and/or point of sale systems. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent. Certificate in two-year technical diploma program for HVAC/refrigeration. Related Work Experience: Extensive experience and training in general maintenance (advanced repairs), electrical or refrigeration, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. REQUIRED QUALIFICATIONS License or Certification: Valid Driver’s License License or certification in refrigeration or electrical (earned, or currently working towards receiving) Universal Chlorofluorocarbon (CFC) certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. Marriott Hotels strive to elevate the art of hospitality, innovating at every opportunity while keeping the comfort of the oh-so-familiar all around the globe. As a host with Marriott Hotels, you will help keep the promise of “Wonderful Hospitality. Always.” by delivering thoughtful, heartfelt, forward-thinking service that upholds and builds upon this living legacy. With the name that’s synonymous with hospitality the world over, we are proud to welcome you to explore a career with Marriott Hotels. In joining Marriott Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you. JW Marriott is part of Marriott International's luxury portfolio and consists of more than 100 beautiful properties in gateway cities and distinctive resort locations around the world. JW believes our associates come first. Because if you’re happy, our guests will be happy. JW Marriott associates are confident, innovative, genuine, intuitive, and carry on the legacy of the brand’s namesake and company founder, J.Willard Marriott. Our hotels offer a work experience unlike any other, where you’ll be part of a community and enjoy true camaraderie with a diverse group of co-workers. JW creates opportunities for training, development, recognition and most importantly, a place where you can pursue your passions in a luxury environment with a focus on holistic well-being. Treating guests exceptionally starts with the way we take care of our associates. That’s The JW Treatment™. In joining JW Marriott, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Job DescriptionSalary: $16 - $21 p/hr About us SpaceManager Closet is the fastest growing companies in the closet and home organization solutions industry in Houston. At SpaceManager Closets, we pride ourselves on working hard, enjoying what we do, and exceeding our customers expectations. This is an exciting opportunity for a carpentry and wood working pro! Multiple Cabinet Manufacturing Jobs SpaceManager Closets has become the top rated custom closets and home organization systems companies in Houston. SpaceManager values its ability to deliver the best customer service possible and it shows weve won multiple service awards from Angies List, Best Picks, Houzz and others. The amazing SpaceManager Team makes all of these accomplishments possible. The ideal person is hard working and teachable, with an eye for detail. Previous experience in carpentry, closet or cabinet industry is preferred. We are looking for Experience with woodworking hand tools - nail gun, table saw etc. Running Edgebanders, Beam Saws, and CNC . Packing and Final Assembly Quality Control and Inspection Qualifications: High-End Cabinetry Manufacturing Cabinetry Assembly/Finishing Touch Up Experience with numerous hardware accessories Cabinetry Adjustment Hardware Installation Candidates should have various woodworking experiences Experience working in a production environment Problem-solving & Critical thinking Great Attitude Highly Motivated Great people skills High Standard of Customer Service We will provide tools if needed Ability to lift 50+ lbs. SpaceManager Closets provides custom designed and manufactured, functional and stylish home organizational systems. We started out building custom closet organizer systems 20 years ago and have since expanded our offering to include expertly crafted custom closet systems, custom home office cabinets, custom pantry closets, custom garage cabinets, garage organizers and epoxy flooring, wall beds or murphy beds, custom entertainment centers, wine rooms and solutions for a host of other rooms and spaces. We work directly with homeowners on their specific projects, but we are also trusted by several home builders and commercial customers in the Houston area to be their exclusive provider of home organizational systems

Job DescriptionPlan, organize, supervise, and complete rough carpentry projects and related tasks for building construction projects. Lead, direct, and coordinate work of Turner Trade rough carpenter employees, subcontractors, and/or vendors. Manage schedule delivery, quality of work performed, and adhere to project budget and safety requirements. The main priorities for this position would be supervisor experience, ability to collaborate with project team, lead personnel, safety conscience, be independent, and to have initiative. Qualifications: • Minimum of 7 years of experience required and minimum of 1 year of foreman, team lead, or supervisory experience, or equivalent combination of education, training, and experience, • Must have and maintain active OSHA 30-hour certification or willing to pursue certification, • Ability to lead, delegate, engage with and motivate teams, • Strong planning and analysis skills, • Able to think critically and use good judgment to solve problems, • Ability to read, understand, and interpret construction contract documents, drawings, specifications, scopes of work, and project schedule to execute work activities, • Clear and professional verbal and written communication skills with ability to apply active listening skills and engage with all levels of teams, clients, business partners, and management, • Basic computer skills to utilize company and project applications (e.g., smart phone/iPad), • Proficient knowledge of Environmental Health Safety (EH&S) processes and regulations, • Ability to develop team members and deliver performance feedback, • Ability to travel using various modes (e.g., automobile, train, air) and accommodate night and weekend work as needed, • Valid state and/or Commercial Driver’s License (CDL) as applicable to operate equipment and/or travel as needed using personal or company vehicles Essential Duties & Key Responsibilities: • Function as working foreman while leading and supervising Rough Carpenters and/or Laborers to perform work including but not limited to building walkways, structures, enclosures, railings, stairs, temporary doors/openings, items required for site safety, and other temporary means for construction or site requirements., • Foster workplace environment where all people demonstrate the highest standards of care of each other using Turner’s Active Caring philosophy with teams, subcontractors, and clients., • Fully comprehend scopes of work and lead teams to complete installation. • Review construction documents to coordinate and plan rough carpentry construction ahead of work going in place., • Conceptualize required rough carpentry items and project requirements to build and direct team to safely construct required rough carpentry items., • Oversee completion of rough carpentry work including but not limited to building walkways, structures, enclosures, railings, stairs, temporary doors/openings, items required for site safety, and other temporary means for construction or site requirements., • Direct team to gather and transport materials, take measurements, cut materials, and install materials as related to rough carpentry assignments., • Assess identified jobsite hazards and direct team to use carpentry skills to correct problems., • Oversee and make decisions related to performance of work and review jobsite needs with project staff for logistics, organization, plant layout, equipment, quality control, and workforce utilization., • Collaborate with project team to create schedules and determine sequencing of work. Develop and implement recovery strategies to maintain project schedule, as required., • Collaborate with project team for scheduling and expediting delivery of materials and equipment., • Develop rough carpentry work schedules and delegate assignments to crew., • Engage with subcontractors and suppliers to communicate and verify their understanding of their scope of work and work implementation plan and monitor their work progress., • Manage contracted work to ensure compliance and conformity of installation with approved contract documents., • Investigate and document resolution of issues within assigned scope of work., • Work closely with Superintendent to resolve local area problems related to procedures, precedence, design clarifications, adequate labor, equipment schedule, and other related matters., • Walk with inspectors for inspections, document inspectors’ comments in Non-Conformance Reports (NCR) or other required reports, fix deficiencies (prior to putting work in place), and document corrections made to deficiencies., • Review, complete, and submit as required daily documentation for time sheets, production sheets, extra work tickets, daily construction reports (DCRs), and safety paperwork., • Collaborate with EH&S and Quality Control teams for overall site safety and quality programs., • Guide assigned Trade teams to conduct and participate in daily Pre-Task Plans., • Ensure Trade employees, subcontractors, and vendors comply with Turner standards, safety codes, regulations, and jobsite security., • Ensure teams fully understand work instructions, project signage, and safety instructions from tool and equipment manufacturers and inspect tools prior use to ensure safe and working condition., • Remind team of safety expectations and oversee team’s operation of equipment, use of safety protocols, selection of appropriate equipment for performing work., • Supervise and develop assigned Trade employees, provide feedback and discipline as needed, and complete or provide input on performance appraisals and Career Development Qualification (CDQ) assessments and development recommendations., • Manage employee matters with discretion and engage with Self-Perform Operations (SPO) and Trades Managers and local Human Resources as needed to resolve problems., • Display high level of teamwork, integrity, commitment, and leadership in daily operations., • Maintain positive working relationships with customers, contractors, suppliers and other employees., • Participate in external interviews for Trade rough carpentry or laborer positions and provide feedback on candidates to interviewer lead., • May operate equipment including forklifts, backhoe, skid steer, excavator, compactors, and construction hoist., • May engage in activities requiring operation of project or personal vehicle.

Job Description Now Hiring: Apartment Make Ready Technician (Full-Time) ️ Location: Houston, TX Competitive Pay | Full-Time | Growth Opportunities Are you a skilled maintenance professional with a strong painting background and an eye for detail? We’re looking for a Make Ready Technician to join our team and help us prepare apartment units for new residents quickly and efficiently. Position Overview: As our Make Ready Technician, you’ll be responsible for turning apartment units over in a timely, high-quality manner. You must have professional painting experience (including spray gun use), and be confident in a range of general maintenance tasks. ✅ Minimum Requirements: • 2+ years of professional painting experience, including spray gun application., • Ability to paint full apartment interiors efficiently and neatly., • Experience installing vinyl flooring and baseboards., • Skilled in basic carpentry, cabinet repairs/installation, and general handyman work., • Preferred: Experience with countertop/tub resurfacing. Ideal Candidate: • Takes pride in their work and pays close attention to detail., • Works efficiently to meet unit turn deadlines., • Reliable, self-motivated, and able to work independently or as part of a team., • Has own tools and reliable transportation (preferred). Schedule: • Full-time

Job DescriptionAs our Carpenter, you will support the building construction team with various carpentry activities including interpreting specifications, measurements, framing, installations and finishing work. A successful candidate in this role should have previous experience with vertical construction projects, a professional work ethic, a teamwork mindset and the commitment to achieve the SpawGlass mission.What you'll do • Structural Framework Construction: Accurately measure, cut, and assemble wood and other materials to build strong, reliable frameworks for walls, floors, and roofs in accordance with blueprints and building codes., • Installation and Finishing: Skillfully install doors, windows, cabinets, trim, molding, and other fixtures, ensuring high-quality finishes and attention to detail for both interior and exterior elements., • Repair and Maintenance: Perform repairs on existing structures, replace damaged or worn components, and ensure buildings remain in good condition and meet safety standards., • Safety and Maintenance Compliance: Adhere to all safety protocols and building regulations, and maintain tools and equipment in good working condition to ensure a safe, efficient, and compliant work environmentWhat you bring to the team, • Previous carpentry experience on commercial projects (e.g., hospitals, schools, grocery stores, parking garages, etc.), • Flexibility in your work schedule, • Strong decision-making, interpersonal and communication skills, • A high-quality approach and will make safety a priority in your daily work routine

Job Description We are looking for an experienc Maintenance Technitian to work in a coating facility duties will include conducting quality assessments, scheduling repairs, maintaining inventory, and developing preventative maintenance procedures. A Jack-of-all-trades, with in-depth knowledge of maintenance procedures, hydraulic systems, and basic tools and appliances. Schedule is 6:00am-2:30pm. JOB DUTIES/RESPONSIBILITIES: -Perform mechanic skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production machines -Develop and perform Preventative Maintenance, adhere to manufacturers' schedules -Record maintenance activities and repairs so as to record/audit performance results -Responsible for providing technical assistance on all things related to facility maintenance including electric, landscaping, painting, carpentry, building construction, plumbing, etc. -Maintain inventory controls for cost effective operations -HVAC / Electrical / General repairs -Recommend course of action to management based on costs -Adhere to all OSHA rules and regulations at all times and wear proper safety equipment while on plant grounds -Perform other job responsibilities as assigned by management QUALIFICATIONS -Plumbing, grounds keeping, electrical, hydraulic and carpentry knowledge -Skill in the use of tools, machines and testing instruments used in the repair and overhaul of plant equipment and building services -Knowledge of the basic operating principles of the electrical and mechanical systems and components found in most plant equipment -Ability to apply knowledge of equipment operating principles to diagnose and correct malfunctions in plant equipment -Good mathematical skills, including basic math, fractions and conversions of four-five digit numbers and common units of measurement in both metric and decimal system -High School Diploma or equivalent -Certificate in HVAC is preferred -Certificate and two (2) years of journeyman level experience in the maintenance and repair of industrial equipment or an equivalent combination of education, training or experience A minimum of 2 years’ experience in a similar role -Continuous exposure to extreme heat, extreme cold, extreme noise, and working outdoors -Requires walking, sitting, lifting, pushing, pulling, and climbing to a significant degree -Must be able to perform all job functions which include, but may not be limited to, pushing, turning, and/or pulling of controls Resume is required for this position. Company DescriptionMAGNUM STAFFING is a recruiting and staffing solutions firm based in Houston, Texas, and founded in 1996. Our areas of specialization include manufacturing, production, warehouse/distribution, technical, and logistics for the industrial business sector. We also provide various services to any industry that assists the client in their human capital management issues. This includes vendor on premise, managed services, payroll transferring and a direct hire specialist focusing on exempt and non-exempt engineering, manufacturing, petrochemical, supply chain management, finance and field operations positions. With the Staffing industry’s badge of professionalism and seal of excellence behind each hiring manager, Magnum has been designated as one of the top 10 staffing firms in Houston by the Houston Business Journal. Also, Magnum was the first industrial staffing firm in Houston to require every hiring manager to be CTS certified, setting the precedent for the city’s industrial staffing industry. By ensuring each hiring manager earns CTS certification, Magnum guarantees its hiring professionals have the most up-to-date knowledge of current employment laws and procedures, as well as business operations and ethics. DOEMAGNUM STAFFING is a recruiting and staffing solutions firm based in Houston, Texas, and founded in 1996.\r\n\r\nOur areas of specialization include manufacturing, production, warehouse/distribution, technical, and logistics for the industrial business sector.\r\n\r\nWe also provide various services to any industry that assists the client in their human capital management issues. This includes vendor on premise, managed services, payroll transferring and a direct hire specialist focusing on exempt and non-exempt engineering, manufacturing, petrochemical, supply chain management, finance and field operations positions.\r\n\r\nWith the Staffing industry’s badge of professionalism and seal of excellence behind each hiring manager, Magnum has been designated as one of the top 10 staffing firms in Houston by the Houston Business Journal.\r\nAlso, Magnum was the first industrial staffing firm in Houston to require every hiring manager to be CTS certified, setting the precedent for the city’s industrial staffing industry. By ensuring each hiring manager earns CTS certification, Magnum guarantees its hiring professionals have the most up-to-date knowledge of current employment laws and procedures, as well as business operations and ethics.\r\n

Job Description Penn Apartment Staffing is hiring experienced EPA-certified Maintenance Technicians who want consistent hours, hands-on work, and opportunities to advance in the multifamily industry across Austin, Dallas, Fort Worth, Houston, and San Antonio. Your experience matters—work where your skills are valued and get connected with top property management companies through Penn Apartment Staffing. Start now and get paid weekly! • Troubleshoot, diagnose, and perform repairs across various maintenance disciplines, including plumbing, HVAC, carpentry, and electrical systems., • Assist in managing community upkeep and maintenance needs, ensuring timely completion of service requests and maintenance projects., • Collaborate with the property manager to ensure property compliance and successful execution of maintenance projects., • Conduct daily property inspections (property walks) to identify, document, and correct deficiencies., • Handle make-ready tasks for move-outs, coordinating with vendors and ensuring proper apartment turnover., • Maintain clear documentation of all maintenance updates, service requests, work-in-progress, and expenditures., • Close service requests promptly upon completion and update the property management system accordingly., • Communicate effectively with residents and management regarding maintenance updates or scheduled services., • Maintain inventory of spare parts, tools, and materials necessary for common repairs., • Safely move heavy appliances and equipment as needed, including removal of abandoned items using appropriate safety equipment., • Hands-on experience in performing service requests and completing make-readies, • Strong working knowledge of HVAC, plumbing, electrical, and general building systems., • EPA certification to handle refrigerants (Type III or Universal preferred), • Excellent problem-solving, and communication skills., • Competitive pay, • Flexible work opportunities for Part Time & Full Time, • Fire Watch, • Seasonal Sign Spinner, • Pool Concierge, • Housekeeper, • Porter/ Groundskeeper, • Make Ready Technician, • Maintenance Technician, • Certified EPA Maintenance Technician Other Penn Apartment Staffing locations: • Austin, Texas: 512-714-3901, • Dallas & Fort Worth, Texas: 972-426-7070, • Houston, Texas: 713-682-0700, • San Antonio, Texas: 830-701-0160Company DescriptionPenn Apartment Staffing specializes in providing tailored staffing solutions for the apartment industry, focusing on both office and maintenance positions. By joining our team, you’ll gain immediate access to job opportunities and have the chance to connect with hiring managers who need to fill their open roles. Our dedicated Staffing Coordinators work closely with you to align opportunities with your career goals, ensuring you find the perfect fit for your next role. Start your new career path with Penn Apartment Staffing today!Penn Apartment Staffing specializes in providing tailored staffing solutions for the apartment industry, focusing on both office and maintenance positions. By joining our team, you’ll gain immediate access to job opportunities and have the chance to connect with hiring managers who need to fill their open roles. Our dedicated Staffing Coordinators work closely with you to align opportunities with your career goals, ensuring you find the perfect fit for your next role. Start your new career path with Penn Apartment Staffing today!

Job DescriptionDiversified Sourcing Solutions is seeking a skilled Carpenter to join the team of one of our clients in the Greenspoint area. This role requires attention to detail and the ability to work independently as well as part of a team. Key Responsibilities: • Perform carpentry work such as building cabinets and other wooden structures., • Read and interpret blueprints to determine project requirements and specifications., • Operate and maintain hand tools and power tools safely and efficiently., • Operate woodworking machines, • Operate various saws such Bandsaws, tablesaws and Midas, • Measure, cut, shape, and assemble materials according to project specifications., • Inspect and replace damaged frameworks or other structures and fixtures., • Ensure all work meets quality standards and complies with safety regulations., • Collaborate with other team members to complete projects on time and within budget.Qualifications:, • Proven experience as a Carpenter or similar role., • Strong understanding of carpentry techniques and methods., • Proficiency in using hand tools and power tools.., • Excellent problem-solving skills and attention to detail., • Strong communication and teamwork skills.

Job Description This position maintains the cleanliness of the construction site and completes minor punch-out under the supervision of the construction management team. RESPONSIBILITIES • Responsible for maintaining the cleanliness of the job site., • Responsible for yard duties, including watering grass and pulling weeds., • Organizational Skills, • Time Management, • Attention to Detail, • Initiative, • Current, valid Driver’s License with acceptable driving record and reliable transportation to work in multiple locations., • Requires a minimum of one year of relevant construction assistant responsibilities., • Health, Dental & Vision, • 401(k), • Life, Short-Term and Long-Term Disability Insurance, • Holidays, • PTO Leave, • New Home Discount, • Perry Homes Family College Fund, • Talkspace Perry Homes is an Equal Opportunity Employer Disclaimer: Recruitment Fraud – Any communication regarding job opportunities from our organization will be initiated through official channels only, including our company email domain, @perryhomes.com and verified social media accounts. We advise candidates to exercise caution and refrain from sharing personal or sensitive information with any party claiming to represent our company outside of these channels. We do not at any early stage of recruitment process solicit personal information (e.g., passport and bank account info), financial details, or any form of payment (e.g., application fee). If you receive suspicious communications, encounter job postings that appear fraudulent, or want to confirm any employment postings, please contact . #ZR

Job Description Overview Tradesmen International is looking to expand our team of qualified Trade Professionals for current & future projects in and around Houston, TX. Most positions are first shift with a pay rate of $25-28/hour based on experience & skill level. If you are a Carpenter and want to work alongside other proven Craftsmen who emphasize safety, productivity and superior workmanship, this is your chance to advance your career! Job Scope to Include any or all of the following for Commercial and/or Residential Projects: • Start to Finish Carpentry, • Metal Studs, Framing, • Rough Builds, • Trim Work (molding, installing cabinets, doors, windows, etc.), • Drywall, • Previous Carpentry Experience, • Tools for the Trade, • Proper PPE must be worn, • OSHA 10 is Preferred Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Vacation Pay, • Health insurance, • 401(k) profit-sharing savings plan, • Incentive programs Click here to visit Tradesmen’s full website.

Job DescriptionMaintenance Technician (Facility) - $15/hr. DOE This is a contact position with an opportunity to be hired full-time. Location: Houston, TX 77051 Schedule: 7:00am-5:00pm Work Environment: Outdoor, Industrial Setting Maintenance Technician (Facility) Responsibilities: • Ensures all safety precautions are followed while performing work, • Maintains working relationship with co-workers, property management and clients, • Completes daily work orders as scheduled, • Ability to use vacuum cleaners to clean rugs, carpet and blinds, • Power wash walls, ceilings, woodwork, windows and doors, • Maintains assigned equipment in good working condition, • Maintains shop, equipment rooms and storage areas in a neat, organized and secure condition, • Assists and performs installation, maintenance, repair and construction work in the basic building maintenance trades, such as carpentry, painting, electrical, plumbing, locksmith, flooring mechanics and other minor building/community repairs, • Ensuring all property maintains exceptional curb appeal by keeping the grounds and buildings clean and properly maintained, • Assisting in lawn and landscape maintenance and amenities, • Utilization of company truck for transportation of supplies and material to job sites, • Routinely inspects and communicates to immediate supervisor as applicable, • Other tasks and projects as assigned by managementMaintenance Technician (Facility) Qualifications and Skills:, • Bilingual (Spanish/English) required, • One year experience in building maintenance or construction, • Professional appearance and demeanor, • Knowledge of manual and electrical hand tools, • Must be able to operate motorized equipment, • Valid Texas Driver’s License, • Ability to work flexible and/or extended hours and weekends based on project requirement, • Ability to pass a background check and drug screenMaintenance Technician (Facility) Physical Requirements:, • Ability to lift and stack objects weighing 15–20 lbs., • Must be able to stand, walk, kneel, and reach for extended periods; climbing ladders or stairs may be required Interested? Want to Learn More? Interested candidates, please contact Maira Ruth via text at (281) 479-1801. Recent relevant experience MUST be on resume to be considered. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities About Us Integrity Trade Services' core philosophy is "Staffing you can trust". The nucleus of this philosophy consists of an intense focus on safety, honesty, fairness and integrity. Quite simply, if we wouldn't do a job ourselves, we wouldn't post it. Fast-growing and well-connected to the industry, we're intent on providing jobs that get you to work quickly, safely, and that compensate you fairly for a job well done. #HIGH1 #ZR

Job DescriptionDescription: We are looking for a reliable and skilled Maintenance Technician. In this position, you will be responsible for a wide variety of activities such as repairs and performing preventative maintenance, and adjustments on our fleet trailers and vehicles. Being reliable and self-motivated with a keen eye for detail is essential in this job, as the ideal candidate will be a problem solver and have solid mechanical knowledge. About Us: Bolton Holdings, LLC through its operational entities Industrial Tent Systems (ITS) & Lodging Solutions is the premier installer of temporary structures and mobile lodging for Refineries, Utilities, and Emergency Response throughout the United States. We pride ourselves on our ability to provide Safer, Faster, and Better turnkey solutions in the construction, petrochemical, and disaster response community. Responsibilities: • Perform repairs, such as fixing broken locks, signs, plumbing on trailers, minor electrical repairs, and small carpentry tasks, etc., • Replace worn-out parts on easily accessible, simple components, • Perform routine checks and adjustments to machinery or trailers, • Install necessary appliances and equipment as needed, • Complete regular maintenance tasks, such as replacing light bulbs, replacing DC converters, installing tankless water heaters, lubricate moving parts of equipment, • Inspect and troubleshoot various equipment and systems, • Test the functionality of the mobile asset’s safety systems, • Assist more experienced technicians with complex tasks, • Reports any issues to our Fleet Manager regarding issues resolved, those needing attention, and those currently in progressRequirements:, • 2+ years of fleet maintenance experience high school diploma or equivalent required, • Basic working knowledge of mechanical, plumbing, and electrical systems, • Mechanical experience around trailers and air brake systems preferred, • Experience working with tools, including hand tools and electrical power tools, • Ability to read and utilize technical manuals and drawings, • Excellent communication and interpersonal skills required and must be able to work both independently and in a team environment, • Passion for creative problem-solving, • Strong work ethic with a safety mindset, • Must have clean driving record (driving company vehicles required), • Must be able to lift and carry up to 50 lbs. at a time regularly, • Must be able to climb a ladder and work from heights with proper safety equipment, • Must be able to be on feet 8 hours a day and be able to walk on a variety of surfaces, • Must be able to work overtime, must be able to travel to jobsites nationwide *Third party agencies are not approved to fill this requisition. *

Job DescriptionFT or PT, M-F, 8-5, Occasi. Sats. $30 Hr, $40 trip allowance per paid job. Experienced Carpenter, PTO, Paid Holidays, AFLAC supplement. We are friendly and treat our Customers and Employees with respect and here is just some of what we have to offer: Benefits: • Vacation, • Performance bonuses, • $40 per trip allowance per paid job, • Vehicle and tool allowance, • Cell phone reimbursement, • Company credit card, • Flexible scheduling, • Advancement and growth opportunities, • Regular pay reviews, • Consistent year-round work, • Dental & Vision, • AFLAC supplement, • Plus more!Multi-skilled Carpenters Ace Handyman Services - Pearland needs your expertise! We are one of Houston's top-rated handyman, repair, and remodeling companies. we provide homes and businesses throughout Houston with quality craftsmanship for all of their repair, maintenance, and remodeling projects both large and small inside and outside. We are currently seeking highly motivated professional Carpenters with skills in multiple trades. If you are looking for a W2 position that allows you the flexibility of an independent job, look no further! We find and schedule the jobs for you, and you provide the quality craftsmanship and customer service that our clients have come to expect from us. You will work out of your home on your choice of a full time or part-time basis, using your own truck or van to travel to job sites in Houston. Your potential wage can range from $30 per hour, and we also provide benefits and performance bonuses. If this sounds like the kind of position youve been looking for, and if you meet our qualifications, we want to hear from you. Contact us today! Job Requirements We are looking for Carpenters with a strong work ethic, a professional appearance and demeanor, and a good overall knowledge of all tradesfrom Carpentry, Tiling, Painting, and Drywalling to light Plumbing and Electrical. You must also display excellent customer service skills, including solid communication and interpersonal abilities, and the ability to interact in a positive way with a wide variety of different types of clients, as well as fellow employees, management, and office personnel. Specific qualifications for the role include: • Successful prior track record as a Carpenter / Craftsman; estimation skills and prior home inspection experience, strongly preferred, • Ability to perform minor electrical and plumbing, • Own standard set of tools to perform all of the above trades, • Own truck or van, • Current and valid drivers license, • Residence within 15 miles of the city of Pearland., • Excellent troubleshooting, analytical, and problem-solving skills, • Strong documentation and invoicing skills, • Professional appearance and demeanor, • Ability to pass a background check and drug screenTake control of your schedule, your earnings and your career! Apply now!

Job Description ABOUT THE POSITION: We are looking for a full-time Maintenance Technician for our property. As a Maintenance Technician, you will be part of a team responsible for maintaining efficient operation and upkeep of the property buildings and grounds. You will work with various building facility issues such as HVAC, electrical, plumbing, pool, carpentry, dry walling, exterior structural, and appliances. For larger tasks, you will coordinate with outside vendors and be the eyes and ears of the property management staff. Compensation and Benefits: * Pay $18-$24 hourly DOE * Discounted Rent Available (1⁄3 of market price) - Onsite Living Optional (Preferred) * Biannual Performance Bonuses * Paid Vacation Holidays; Sick Days RESPONSIBILITIES: * Complete maintenance work orders including (but not limited to) electrical, plumbing, light carpentry, appliances, and HVAC work orders in a safe timely manner. * Troubleshoot, repair, and replace in-unit appliances * Complete necessary maintenance turnover work for move-ins. * Maintain all equipment to ensure safety and proper upkeep. * Maintain common areas for safety and appearance. * Deliver or post notices to residents. * Perform move-in / move-out inspections * Interact with customers and co-workers positively and professionally. * Perform regular walkthroughs and inspections of the property to ensure everything is well-kept and safe. May need to provide access to vendors and potential tenants as necessary. * Inspect work done by third-party vendors * Adhere to company rules and standards of conduct * Assist drive to other nearby properties managed by JKL Corporation if necessary * Respond to off-hours emergencies EDUCATION AND EXPERIENCE: * Previous maintenance experience in building maintenance or construction. * High school diploma or equivalent. * Communicate and write in English Equal Opportunity Employer: We are proud to be an Equal Opportunity Employer and are committed to creating an inclusive and diverse workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law. We encourage applications from individuals of all backgrounds and experiences. Company DescriptionJKL Corporation is responsible for management and development of JKL Corporation’s apartment and commercial portfolio. For over 30 years, JKL Corporation has been successfully managing commercial and residential properties throughout California. Apartment Home Communities JKL Corporation successfully manages a diverse portfolio of apartment home communities, and commercial buildings. JKL Corporation is based in San Mateo, California, and has satellite office in Fremont, California. JKL Corporation is engaged in all aspects of real estate management. When the firm was established in 1978, it was done so with a vision that real estate is about people. With that in mind, JKL’s team of property management professionals is devoted to serving our clients with the highest ethics and professionalism.JKL Corporation is responsible for management and development of JKL Corporation’s apartment and commercial portfolio. For over 30 years, JKL Corporation has been successfully managing commercial and residential properties throughout California. Apartment Home Communities JKL Corporation successfully manages a diverse portfolio of apartment home communities, and commercial buildings.\r\n\r\nJKL Corporation is based in San Mateo, California, and has satellite office in Fremont, California. JKL Corporation is engaged in all aspects of real estate management.\r\n\r\nWhen the firm was established in 1978, it was done so with a vision that real estate is about people. With that in mind, JKL’s team of property management professionals is devoted to serving our clients with the highest ethics and professionalism.

Job Description HVAC Technician Licensed HVAC Tech: Commercial $1500 Sign-On Bonus Eligibility Company Provided - VEHICLE, FUEL, PHONE JOB DESCRIPTION The Facility Maintenance Technician position is responsible for installation, repair, and troubleshooting according to safety, predictive and productive maintenance systems and processes to support achievement of The Customer’s business goals and objectives. We seek candidates with an excellent attitude and willingness to take care of The Customer. We furnish a company vehicle, all fuel, vehicle maintenance, and a company Phone. We offer paid vacations, sick days, paid holidays, and have voluntary plans in health insurance and ancillary insurance. Essential Functions · Perform a variety of HVAC, and other service, repair and maintenance functions. · Provide emergency/unscheduled repairs to facilities and scheduled maintenance repairs of facilities. · Perform service skills including, but not limited to, carpentry, plumbing, electrical, troubleshooting and repair of facilities. · Read and interpret equipment manuals and work orders to perform required maintenance and service. · Diagnose problems, replace or repair parts, test and make adjustments. · Perform general and preventive maintenance on facilities. · Use a variety of hand and power tools, meters and material handling equipment in performing duties. · Detect faulty operations, defective material and report those and any unusual situations to proper supervision. · Comply with safety regulations and maintain clean and orderly work areas. · Be able to effectively communicate via handheld mobile device (company provided) · Must be able to perform duties using various applications via mobile device (company provided) · Must be able to turn in all applicable paperwork for each work order (ie. before and after photos, signed and stamped work orders, etc.) · Must maintain regular work attendance habits / good work attendance habits. • Must be able to drive from service to service, • Properly recording work time and complying with the Company's timekeeping procedures, • Answering Phones Competencies · Technical Capacity · Ethical Conduct · Communication Proficiency · Results Driven · Good Attendance Habits Supervisory Responsibility This position has no supervisory responsibilities. Work Environment Work is regularly performed in a combination of office, warehouse, outdoor, and shop environments and is regularly exposed to dust, odors, oil, fumes and noise. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Position Type/Expected Hours of Work This is a Reactive to Service Calls type job. There is On-Call Duty on scheduled rotations. Availability for OT Travel Travel is expected for this position. (Must have a valid updated driver license) (Must be able to drive). (Must also be able to be insurable by the companies auto insurance company.) Required Education and Experience · High school diploma/GED and completion of a craft apprenticeship, or an equivalent number of years of education and production maintenance experience. HVAC License Preferred Education and Experience 3+ years of Licensed Commercial Experience in HVAC Additional Eligibility Qualifications You must furnish your own hand tools, power tools, and must be able to pass a drug screen and background check. AAP/EEO Statement As an equal opportunity employer, ACS Commercial Services, L.L.C. does not discriminate in its employment decisions on the basis of race, religion, color, national origin, gender, sexual orientation, age, military status, disability, or on any other basis that would be in violation of any applicable federal, state, or local law. Furthermore, ACS Commercial Services, L.L.C. will make reasonable accommodations for qualified individuals with known disabilities unless doing so would result in an undue hardship, safety, and/or health risk. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Job Type: Full-time Company DescriptionACS is a Full Service Facility Maintenance Commercial Services & Construction Company. We are not just another, maintenance company; we are the best in the industry and have the best retail clients in the industry.ACS is a Full Service Facility Maintenance Commercial Services & Construction Company. We are not just another, maintenance company; we are the best in the industry and have the best retail clients in the industry.

Job Description ️ Now Hiring: Make-Ready / Maintenance Technician Location: Houston, TX Industry: Multifamily / Apartment Communities Schedule: Full-Time | Monday–Friday | Occasional On-Call Position Overview: We are seeking a skilled and reliable Make-Ready / Maintenance Technician to join our apartment maintenance team in Houston, TX. The ideal candidate will bring hands-on experience, technical licenses, and a strong attention to detail to help prepare apartments for new residents and maintain the property to a high standard. ✅ Required Skills & Experience: • Professional Painting (with sprayer) – Full interiors/exteriors, not just touch-ups, • Carpentry & Cabinetry Repair – Framing, trims, cabinet door/drawer repair, • Bathtub Resurfacing – Must have specific training & experience, • Countertop Resurfacing – Proper prep, application, and finish required, • Vinyl Flooring Installation – Wall-to-wall (not just spot repairs), • Baseboard Installation – Full-unit installs, including caulking and painting ⚙️ Licensing & Certifications (Required or Preferred): • ✅ EPA HVAC Certification – Required, • ✅ Plumbing License – Preferred, • ✅ Electrical License – Preferred

Job DescriptionDescription: FINISH CARPENTERS – TRAVELING NATIONWIDE General Information: Employment Type: Full-time Salary: Commensurate with Experience – Top Pay Benefits Package: Health insurance, Dental Coverage, 401K, Long Term Disability, Life Insurance, Travel perks, Referral Bonuses Position Summary: We are a leading nationwide millwork and fixture installation company actively pursuing motivated finish carpenters and fixture installers that are able to work in a diverse range of projects performing fixture, casework, and millwork installations in commercial and retail environments. Candidate must have working knowledge of the properties of wood and other building materials, a strong understanding of standard and finish carpentry operations and methods, familiarity with plan reading, the ability to problem solve and a willingness to learn new skills. This position works independently with minimal direction and embodies our client first and safety conscience culture. This is a TRAVELING position as we work in 50 States. We have immediate traveling positions available at this time. If you are looking for stability, outstanding compensation package, and want to work for one of the top companies in our industry, please contact us now! Requirements: Responsibilities & Duties: · Complete onsite millwork, cabinet and countertop, retail fixture, graphic, and décor installs in retail and commercial environments · Represent the company in a professional manner at all times; Adopt and embrace our company Core Values · Submit paperwork: time sheets, expense reports, daily reports as required · Ability to Lead projects is a plus and offers additional compensation Required Skills · Ability to work independently with minimal supervision or in a group environment · Working knowledge of woodworking hand and power tools · Working knowledge of architectural and shop drawings · Working knowledge of plumb, level and square · Proficient use of a laser level · Able to professionally interact with clients · Able to install cabinets and counters · Able to install running trim: base, chair rail, door and window casing, crown molding · Must be able to Scribe trims and fillers as necessary · Able to install wall panel systems · Introduced to solid surface installs with experience completing seams · Must have a strong commitment to job site safety including maintaining a clean jobsite at all times Requirements: Education: High School Diploma or Equivalent Experience: 5+ Year’s finish carpentry preferred Certification(s): Osha 10 or 30, Forklift Certification, Aerial Lift Certification (company will provide as needed) Technology: Able to download and use Apps on phone or other mobile devices; able to make electronic submissions through company intranet Physical Demands: · Walk and stand for long periods of time · Ability to climb ladders, work from an aerial lift · Frequent bending, kneeling, twisting, squatting, and crawling · Work with materials over your head for short periods of time · Lift and carry objects weighing up to 50 pounds or more Conditions of Employment: · Must be able to pass a DRUG SCREENING and PERSONAL BACKGROUND CHECK · Must be able to pass an MVR (motor vehicle report) screening for approved driving status · Must be able to complete Company Sponsored CPR/First Aid training online · Must be able to work overtime as needed (typical work week is 40 to 60 hours) · If hired as a traveling carpenter, must be able to travel up to 100% of the time without return trip homes for durations up to 3 to 6 weeks · Must provide own cordless drill and hand tools Core Equipment: Cordless drill and impact set, laser level, traveling toolbox and bag, chisels, speed square, torpedo level, chalk line, claw hammer, mallet, multi tip bits, screwdrivers, socket sets, pliers, clamps, tape measure, pry bar, carpenter pencils and utility knife

Job DescriptionMulti-skilled Carpenters Ace Handyman Services - Central Houston needs your expertise! We are one of Houston's top-rated handyman, repair, and remodeling companies. we provide homes and businesses throughout Houston with quality craftsmanship for all of their repair, maintenance, and remodeling projects both large and small inside and outside. We are currently seeking highly motivated professional Carpenters with skills in multiple trades. If you are looking for a W2 position that allows you the flexibility of an independent job, look no further! We find and schedule the jobs for you, and you provide the quality craftsmanship and customer service that our clients have come to expect from us. You will work out of your home on your choice of a full time or part-time basis, using your own truck or van to travel to job sites in Houston. Your potential wage can start at $30 per hour, plus $40 trip allowance for each paid job, and we also provide benefits and performance bonuses. If this sounds like the kind of position youve been looking for, and if you meet our qualifications, we want to hear from you. Contact us today! Here is just some of what we have to offer: • Vacation, • Performance bonuses, • Vehicle and tool allowance, • Cell phone reimbursement, • Company credit card, • Flexible scheduling, • Advancement and growth opportunities, • Regular pay reviews, • Consistent year-round work, • Plus more!Job Requirements We are looking for Carpenters with a strong work ethic, a professional appearance and demeanor, and a good overall knowledge of all tradesfrom Carpentry, Tiling, Painting, and Drywalling to light Plumbing and Electrical. You must also display excellent customer service skills, including solid communication and interpersonal abilities, and the ability to interact in a positive way with a wide variety of different types of clients, as well as fellow employees, management, and office personnel. Specific qualifications for the role include: • Successful prior track record as a Carpenter / Craftsman; estimation skills and prior home inspection experience, strongly preferred, • Ability to perform minor electrical and plumbing, • Own standard set of tools to perform all of the above trades, • Own truck or van, • Current and valid drivers license, • Residence within 15 miles of the city of Downtown Houston, • Excellent troubleshooting, analytical, and problem-solving skills, • Strong documentation and invoicing skills, • Professional appearance and demeanor, • Ability to pass a background check and drug screenTake control of your schedule, your earnings and your career! Apply now!

Job DescriptionDescription: We are a leader in Millwork and Fixture Installations seeking experienced and enthusiastic working Lead Finish Carpenters who can perform in a diverse range of situations overseeing and installing fixtures, casework and millwork in commercial and retail environments. “We have traveling positions available. If you are looking for stability, outstanding compensation and want to work for a Leader in our Industry, please contact us now.”Requirements: Education: High School Diploma or Equivalent Experience: Five (5) years fixture installation and retail or commercial finish carpentry experience. One (1) year minimum supervisory experience. Certification(s): OSHA10 or 30, Forklift, aerial lift (Company will provide if necessary). Technology: Able to download and use APPS on phone and mobile devices. Able to make electronic submissions though company portal. Physical Demands: Ability to walk and stand for long periods of time, climb ladders, work from an aerial lift. Frequent bending, kneeling, twisting and squatting. Work with materials over your head for short durations. Able to lift and carry objects weighing up to 50 lbs. regularly. CONDITIONS OF EMPLOYMENT Must be able to pass a Drug Screening, Criminal Background Check and MVR screening for approved driving status. Must be able to complete a Company Sponsored CPR/First Aid Training course online. Available to work overtime as needed. Our typical workweek is 40 to 60 hours. Be flexible to work non-conventional shifts when required (some overnight projects may occur). Able to travel and be away from home for durations from 2-8 weeks depending on our contract. Must provide own basic hand tools and cordless drill. COMPENSATION AND BENEFITS PACKAGE Company provides Health, Dental and Life Insurance, Long term Disability Plan, 401k, Reimbursement for travel expenses, Travel Perks, Referral Bonuses. Top pay based on experience. KEY RESPONSIBILITIES AND SKILL REQUIREMENTS · Able to complete onsite millwork, cabinet and countertop, fixture, graphic and décor installs in commercial and retail environments. · Personnel management of various crew sizes ranging from 3-6 employees or larger projects of 8 or more employees. · Able to receive, stage and manage large inventory of millwork and fixture parts for distribution and installation. · Able to evaluate site conditions, construction and delivery schedules and when these factors are not aligned, clearly and effectively communicate to Project Management Team, onsite contractor or when necessary, our client. · Able to establish and understand layouts for millwork, fixtures and other elements. · Must always represent the company in a professional manner. Adopt and embrace our company Core Values. · Report time sheets, expense reports, daily reports and progress photos electronically. Generate additional work validations as required when non-contract scope is required. · Perform all tasks of a finish carpenter including installation of cabinets, countertops, standing and running trim (base, chair rail, crown moldings, door and window casings), scribing, coping, installing wall panel systems, retail fixtures etc. · Ability to manage and motivate others while maintaining professionalism. · Able to professionally interact with clients, general contractors and other sub-contractors. · Strong working knowledge of woodworking hand and power tools. · Strong working knowledge and understanding of architectural drawings, shop drawings and fixturing floorplans. · Must have a strong commitment to job site safety including always maintaining a clean jobsite. “OUR CORE VALUES DRIVE EVERY DECISION AND AREINTERWOVEN INTO EVERYTHING WE DO”We lead the pack. We are fair, honest and respectful in every interaction.We got your back. We support and encourage doing what’s right,even when it’s not easyWe have fun. We inspire, have passion, and create fun in all that we do.We get it done. We are driven to hold ourselves accountable in making “yes” happen.

Job Description The Hilton Houston Westchase is looking for a skilled and reliable Engineer to help keep our hotel running smoothly and safely. Join a trusted brand, a supportive team, and a workplace where your work makes a real impact every day. Below is more information about the position:Job Title: Maintenance Responsible primarily for general maintenance, preventative maintenance and repairs in hotel guest rooms, meeting space, restaurant and common areas. Perform some repairs on mechanical, electrical, plumbing, kitchen, and laundry areas and equipment. Essential Duties and Responsibilities include the following. Other duties may be assigned. Responsible for engineering and maintenance operations of the hotel, hotel property, restaurant and grounds. Responds to engineering and maintenance concerns. Performs and/or monitors maintenance and preventative maintenance projects. Responds to all building related safety concerns. Maintains departmental compliance with hotel maintenance procedures. Supports hotel departmental maintenance programs and executes daily, weekly and monthly checklists. Assists in the supervision of temporary maintenance projects. Assist management in specifying proper supplies and equipment for operations. Responds to hotel guest related concerns with a positive guest centered and hospitable manner. Maintain the guest rooms, public space, and back of the hotel areas in good repair by performing various tasks related to a variety of trades including carpentry, plumbing, electrical, air conditioning, painting, wall covering and tiling to ensure an attractive and well-maintained hotel. Must possess knowledgeable of basic hand/power tool operation. Clean and maintain pool and spa area. Must be available to respond to emergencies when not physically at the job site. Perform assigned duties with attention to detail, speed, accuracy, follow-through, courtesy, cooperativeness and work with a minimum of supervision. Effectively deal with internal and external customers, some of whom will require high levels of patience, tact, and diplomacy to defuse anger. Works well under pressure of maintenance issues at time of check-in/check-out of guests and handle multiple tasks at once. Must be able to work days, evenings, weekends, and holidays. Education and/or Experience At least 6 months hotel maintenance department experience in a similar capacity. Should have basic understanding of HVAC, electrical, plumbing and carpentry concepts. Experience handling common housekeeping, maintenance and pool chemicals in a safe manner and encouraging the safe use of those chemicals by all appropriate employees. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to stand, walk, sit, use hand to finger, handle or feel objects, tools and/or controls, reach with hands and arms, climb stairs, balance, stoop, kneel, crouch, crawl, talk and hear. Employee will be occasionally exposed to housekeeping, maintenance and pool chemicals. The employee must occasionally lift push pull and/or move up to 75 pounds. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate.

Job Description This is a unique opportunity to join a team of highly motivated property management and operation professionals in the Houston, Texas area. Investors' Property Services is a 45-year-old, privately held full service commercial and residential real estate company. The work is fast paced, exciting and rewarding and we execute at the highest level. An employee focused company that puts people before profits. We are looking for a Maintenance Technician to undertake the maintenance activities on behalf of property owners. The successful candidate will encompass the following skills: SUMMARY: This position is responsible for providing skilled and unskilled maintenance tasks to maintain and improve property function for clients. DUTIES AND RESPONSIBILITIES: • Performs carpentry, electrical, basic plumbing, and installation of appliances and fixtures in property, • Receives written work orders or verbal instructions from supervisor, • Paints interior and exterior walls and trim, • Repairs parking lot and sidewalks with asphalt, cold patching materials, and concrete, • Operates pressure wash equipment to maintain parking lots and sidewalks, • Maintains and repairs buildings' plumbing, HVAC, and electrical systems, including replacing worn or defective parts such as switches and fuses, • Installs light fixtures and power supply outlets, • Maintains and repairs wood parts of buildings, • Replaces worn or damaged parts such as hoses, wiring, and belts, in machines and equipment such as truck, street sweeper, and riding mower, • Assists other departments with moving furniture and unloading and storing supplies This job has no supervisory responsibilities QUALIFICATIONS: • High school diploma or general education degree (GED), or one to two years related experience and/or training, or equivalent combination of education and experience., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization., • Competent skills using a variety of tools., • Demonstrated ability to plan and prioritize tasks in a self-directed work environment and maintain high levels of productivity without direct supervision., • Detail oriented. Salary: Based On Experience

Job Description Growing property management company is in need of an Assistant Maintenance Technician in Houston, Texas. If you thrive in a team environment and like change and challenges, this will be your opportunity! Great support from management, growth opportunities, strong benefits offering and fun work environment! SUMMARY: This position is responsible for providing skilled and unskilled maintenance tasks to maintain and improve property function for clients. DUTIES AND RESPONSIBILITIES: • Performs carpentry, electrical, basic plumbing, and installation of appliances and fixtures in property, • Receives written work orders or verbal instructions from supervisor, • Paints interior and exterior walls and trim, • Repairs parking lot and sidewalks with asphalt, cold patching materials, and concrete, • Operates pressure wash equipment to maintain parking lots and sidewalks, • Maintains and repairs buildings' plumbing, HVAC, and electrical systems, including replacing worn or defective parts such as switches and fuses, • Installs light fixtures and power supply outlets, • Maintains and repairs wood parts of buildings, • Replaces worn or damaged parts such as hoses, wiring, and belts, in machines and equipment such as truck, street sweeper, and riding mower, • Assists other departments with moving furniture and unloading and storing supplies, • Performs other related duties as assigned by management SUPERVISORY RESPONSIBILITIES: This job has no supervisory responsibilities QUALIFICATIONS: • High school diploma or general education degree (GED), or one to two years related experience and/or training, or equivalent combination of education and experience., • Make ready experience, preferred OTHER SKILLS REQUIRED: • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization., • Competent skills using a variety of tools., • Demonstrated ability to plan and prioritize tasks in a self-directed work environment and maintain high levels of productivity without direct supervision., • Detail oriented., • Able to work in a team environment and take direction. JOB TYPE: Full-time

Job Description Who we are: Want to be part of a growing company whose core value includes supporting your success and advancement in the company? CLEAR Property Management isn't a mega-institution where you'd be lost. Clear and simple, we successfully manage properties by making a CLEAR and positive difference in the lives of our residents, our staff, and owners. Since 2008, we've organically grown to become one of the most highly respected Property Management Companies in Texas. The CLEAR brand stands for precision, dedication, and excellence. Our employees are enthusiastic, hardworking, and ambitious and tech-savvy with great interpersonal skills. They are entrusted with seeing the big picture, given the freedom to make great things happen, and empowered with the responsibility of helping direct a successful future. Our growth is in large part due to having the industry's brightest, most talented, and most driven people on our team. In return, we support our employees by empowering them & maximizing their development and career opportunities at local and regional levels. Do you think you've got what it takes to be CLEARLY better? The Job: The Maintenance Technician assists the Maintenance Supervisor in maintaining the physical integrity of the community and handling all service requests including HVAC calls. This involves ensuring a safe, secure and comfortable living environment for residents, visitors and staff. The Maintenance Technician will carry out assigned duties in a safe manner and other duties as requested by the Maintenance Supervisor or Community Manager. In the absence of the Maintenance Supervisor, the Maintenance Technician will assume all maintenance responsibilities. The Maintenance Technician may also assist with getting vacant apartments back to “market ready” status. DUTIES AND RESPONSIBILITIES Conduct all business in accordance with company policies and procedures, Fair Housing, Fair Credit Reporting Act, and all other applicable federal, state and local laws. Preventive Maintenance/Safety • Must be knowledgeable of pertinent laws and EPA and OSHA regulations governing proper storage and management of hazardous materials, including solvents, flammables, caustics and Freon., • Must be aware of the condition of apartment property throughout the community and immediately initiates action to correct unsafe conditions, i.e., broken gates leading to pool, broken steps, open holes, broken/burned out exterior lights., • Schedules and performs routine preventive maintenance on all appropriate equipment as directed by Maintenance Supervisor and Community Manager., • Inspects and maintains all tools in excellent condition., • Must be aware of utility meter cut-offs, apartment and fixture cut-offs, sewer clean-outs., • Performs work area clean-up and safety-related duties., • Ensures that storage areas remain locked when not in use. General • Diagnose and performs minor or routine maintenance or repairs in the trades of; electrical, plumbing, carpentry, HVAC, appliance repair, drywall, roofing, exteriors, windows, and carpentry., • Inspects and helps coordinate all needed make-ready repairs and services. Assists make-ready staff as required to meet deadlines., • Reports all major repairs and requisitions to Community Manager prior to any expenditure of funds., • Changes locks and makes keys., • Removes and transfers heavy appliances and equipment from storage area to apartment (or vice versa) as circumstances warrant. Assists in moving abandoned furniture, appliances, etc., to dumpster when necessary., • Must be knowledgeable of inventory levels of spare parts and supplies and inform Service Supervisor of shortages., • Assists in keeping grounds neat and free of litter. Rakes, sweeps, shovels as circumstances warrant., • Performs any additional duties assigned by Maintenance Supervisor or Community Manager. QUALIFICATIONS Bilingual Requirement. Position requires at least one year of experience in on-site property maintenance. HVAC Certified. Equipment Requirement: Required to wear back support belt, wear goggles when working with specific equipment, wear masks and gloves and other safety equipment as tasks dictate. Work Hours: Full TIME - Minimum of 35 hours per week. Weekends as circumstances warrant; on-call on a rotating basis for emergencies. Equipment/Machinery/Tool: The Maintenance Technician must be knowledgeable & skilled in the safe use & maintenance of trade tools. We have excellent benefits that include: • Monthly commissions for all active on-site employees, • Partially sponsored health, dental and vision, • Voluntary pet, life, disability, 401(k), etc., • Leadership and skills training, • Support for a positive work/life balance, • Paid holidays and Paid Time Off, • PTO annual accrual increases based off years of employment

Job DescriptionDescription: Essential Functions: • Swimming pool care and maintenance (CPO certified preferred but not required), • Maintains and makes general repairs to the plumbing fixtures, electrical system, appliances, ventilation system and building structure of the club., • Performs various duties involving painting, carpentry, and electrical work., • Maintains the air conditioning, refrigerators, and kitchen equipment., • Inspects air handler units daily and makes any repairs, • Inspects lighting throughout the club and makes any necessary changes., • Performs water test for hardness and checks pressure on all chillers daily., • Checks all motors in engine room daily., • Changes filter on air handler units monthly., • Responds to calls from staff and members for maintenance and other needs., • Assists in planning for PA system and decorations for parties with Facilities Director or General Manager’s approval., • Diagnoses problems replace or repair parts, test and make adjustments., • Uses a variety of hand and power tools and material handling equipment in performing duties., • Detects faulty operations, defective material, and report those and any unusual situations to proper supervision., • Wears personal protective equipment (PPE) when operating high power tools, • Follows Lock Out Tag Out Procedures, • Complies with safety regulations and maintains clean and orderly work areas. Occasional Interaction with vendors Additional Responsibilities: Occasional driving to purchase parts and items needed for maintenance and other general departments Working Conditions: Occasionally subject to hot and cold temperatures and inclement weather conditions Requirements: Special Requirements: • Must possess an outgoing personality, • Must possess honesty and integrity, • Must always be courteous and tactful, • Must treat others with kindness and respect, • Ability to effectively communicate in a professional manner to employees and managers., • Wear physical protective equipment when required, • Wear hard leather work boots, • Appear for work on time, • Interact well with co workers, • Understand and follow posted rules and procedures The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • The employee is occasionally required to stand, walk, climb stairs, climb ladders, balance stoop, kneel, crouch, crawl and/or sit up to eight hours per day., • Use hands to finger, handle, or feel objects, tools and/or controls., • Reach with hands and arms., • Hearing and talking sufficient to communicate with members, guests, vendors, and staff., • Specific vision abilities include close vision, vision sufficient to read, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus., • Must be able to push, pull or lift to 75 lbs., • Frequent lifting 20 to 30-pound objects, • Independent mobility through clubhouse.

Job Description Maintenance Technician Overview The Maintenance Technician is responsible for performing highly diversified duties to install, troubleshoot, repair, and maintain production and facility equipment according to safety, predictive and productive maintenance systems and processes to support the achievement of the site's business goals and objectives. Responsibilities: • Perform highly diversified duties to install and maintain production machines and the plant facility's equipment., • Provide emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service., • Perform simple machinist duties and responsibilities., • Perform mechanical skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production machines., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Diagnose problems, replace or repair parts, test and make adjustments., • Perform regular preventive maintenance on machines, equipment, and plant facilities., • Perform a variety of plumbing maintenance and carpentry functions., • Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties., • Detect faulty operations, defective material, and report those and any unusual situations to proper supervision., • Comply with safety regulations and maintain clean and orderly work areas., • 2-3 years in maintenance and mechanical experience preferred., • High school diploma/GED required., • Effective written and oral communication skills., • Able to work well with minimal supervision., • Ability to prioritize tasks and follow specified procedures., • Moderate physical effort which requires standing on a concrete floor for prolonged periods of time., • Regularly required to stoop, kneel, bend, crouch and lift up to 50 pounds., • This position is in an unairconditioned warehouse environment., • May come in contact with hazardous and non-hazardous chemicals., • Subject to loud noise.

Job DescriptionUnemployed or underemployed, take advantage of our immediate openings with local, as well as nationally recognized properties. Don’t miss the Opportunity to advance your Career!! The Liberty Group is immediately hiring for experienced Apartment Community Maintenance Make Ready - Turn Key - Punch Tech for multiple locations in the greater Houston area.Job Responsibilities: • Prepare vacant apartments for market ready status through turn-over repairs and improvements., • Demonstrate the ability to multitask and prioritize., • Perform all make-ready duties including but not limited to: painting, vinyl tile, punch-out & sheetrock repair and trash-outs., • Must have experience with installation of ceiling fans, wall sockets and minor plumbing., • Cleaning and maintenance of grounds, including common areas., • Provide residents with outstanding customer service.Must meet the following qualifications:, • At least 6 months of onsite experience, • Valid I.D. required, • Have reliable transportation, • Own tools necessary to perform basic turnsHourly Salary:$16-$19This is a great opportunity for those who have Hotel, Rehab, Condo, Construction and Carpentry experience and want to get into the multi-family industry! The Liberty Group provides Equal Employment Opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics.#zrm

Job DescriptionDescription: We are looking for a Bilingual Assistant lead Maintenance Technician for one of our communities in Houston, What's AWESOME about Ashford Communities... • Our CULTURE focuses heavily on Teamwork, Trust, Fun, and Customer Care!, • Employees are rewarded and recognized for their efforts and performance! Position Summary The Maintenance Technician will be responsible, under the direction of the Maintenance Supervisor, for the overall day-to-day maintenance of the interior and exterior of their Ashford Community. The incumbent is responsible for the maintenance, repair, and rehabilitation of the community in all areas related to the maintenance operations. Additionally, they must ensure the proper operation of all appliances, heating and cooling units, and light fixtures. It is their responsibility to anticipate, identify, and correct any problems involving the community and to implement processes and procedures that will prevent such issues. Daily responsibilities may include running work orders (electrical, plumbing, HVAC, etc.), appliance repairs, assisting with unit make-ready for future move-ins, pool maintenance/upkeep, and exterior maintenance. In addition, maintenance technicians often must respond to after-hour emergencies. Therefore, being on-call is part of the job responsibilities. Essential Job Functions Make Ready – 60% -Complete the make-ready process of vacant apartments as assigned by the Maintenance Supervisor. -Perform adequate level of carpentry work including the repair of porches (stairs, decking, joisting, handrails, trim), walls, windows, siding, doors, and other carpentry work. -Install, maintain, and repair a variety of floor covering such as carpeting, tile, linoleum, and wood; experience with fabrication and installation of laminate countertops; experience performing repair of roof coverings such as composition, rolled, and shingle. -Read and interpret sketches, diagrams, and blueprints. Ticket Runner – 20% -Responsible for the timely completion of all assigned maintenance service requests promptly. -Operate, maintain, and repair a variety of mechanical tools and equipment such as power saws, power sanders, drills, air compressors, paint sprayers, generators, pressure washers, landscape equipment; and various hand tools required for carpentry, plumbing, and other general maintenance. • Schedule and perform preventative maintenance on buildings. -Coordinate with the special projects team as directed by the Maintenance Supervisor or Director. -Assist in monitoring all work being performed by outside contractors as directed. -Monitor and maintain all building systems as assigned. Groundskeeping – 10% -Assist with community grounds work as directed by the Maintenance Supervisor which may include picking up trash, sweeping curb and dumpster areas, and maintaining landscaping beds and other areas. • Assure safety standards are upheld and follow all company, local, city, state, and federal guidelines. -Assist with “trash-out” of vacant apartments as needed. Administrative and other general tasks – 10% -Maintain inventory for cost-effective operations. -Responsible for alerting the Maintenance Supervisor and/or Community Manager of any unusual occurrence and/or damage that has taken place or that may occur. -Ensure compliance with all work-related activities in a fair, ethical, and consistent manner. -Maintain a professional and courteous manner with all residents, vendors, contractors, and fellow team members. Requirements: QUALIFICATIONS AND EDUCATION REQUIREMENTS Minimum Required Education and Skills -1-2+ years of experience in related fields of construction or maintenance/repair and/or training -Entry level of skill in the following areas; electrical, plumbing, HVAC, swimming pool, carpentry, drywall, exterior structure and appliances -Strong knowledge of current repair and maintenance techniques and procedures -Ability to use a variety of hand and power tool -Self-motivated, results-driven with the ability to handle difficult situations -Ability to work well under pressure -Strong judgment and ability to exhibit self-control and work well in tense situations -Ability to follow written and verbal directions -Must be willing to be on-call to respond to after-hour emergencies as needed -Flexibility with work schedule to include the ability to work extended hours periodically -Must be willing to travel and assist at other Ashford Communities as needed -Must have reliable personal transportation to travel between Ashford properties -Valid driver’s license Preferred Education and Skills -High School Diploma or GED -Associate degree or equivalent from a two-year College or technical school -Knowledge of OSHA laws and regulations -Basic computer knowledge helpful PHYSICAL DEMANDSThe physical demands described here are representative of those that must be met by the team member to successfully perform the critical tasks of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform those critical tasks. Environment: The incumbent typically works in a building and outdoor areas and uses mechanical and office equipment as needed to perform duties with associated noise levels. Weather conditions may vary. The employee may encounter frequent interruptions throughout the workday and encounter extensive public contact at times. The position requires travel for property errands or training classes. Possible to work long hours and odd schedules (weekends) to fulfill job duties. Physical: Primary functions require sufficient physical ability and mobility to work in a maintenance or office setting; to stand or sit for prolonged periods. Also required to regularly talk, listen, and hear, frequently required to use repetitive hand motion, handle or feel, and to sit, stand, walk, reach, bend, and occasionally push, pull, and lift to 50 pounds and occasionally lift/move up to 100 pounds. This team member is occasionally required to climb or balance, kneel, crouch or crawl, and reach overhead and below the knees, including bending, twisting, pulling, and stooping. This team member may be occasionally required to climb ladders, high spaces, and/or stairs. The incumbent will at times use mechanical equipment typical of those used in the maintenance of buildings, construction, and landscape. Vision: Ability to see in the normal visual range with or without correction. Specific vision abilities required by this job include close peripheral vision, depth perception, and the ability to adjust focus. Hearing: Ability to hear in the normal audio range with or without correction WORK ENVIRONMENTThe work environment characteristics described here are representative of those a team member will encounter while performing the critical tasks of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform critical tasks: • While performing the duties of this job, the employee is at times exposed to outside weather conditions although most of the time is in an office, apartment, workstation, shared space, and/or warehouse, • Highly professional, clean, and organized, • The noise level in the work environment is quiet to moderate loudness

Job Description Mechanical Technician – Facilities Houston, Texas, United States Company Overview: Intuitive Machines is an innovative and cutting-edge space company making cislunar space accessible to both public and private customers. Our mission is to further science and exploration, communications, and economic progress from the Earth to the Moon and beyond. With the first commercial lunar landing in history, multiple NASA lunar missions in development, and additional private missions on our manifest, we pride ourselves in supporting our customers and the nation in paving the way to return humans to the surface of the Moon. Our world-class team includes experts in all aspects of spacecraft subsystems design, development, and test, on-orbit operations, and safety. Position Overview: To ensure success as a mechanic technician, you should have high-level problem-solving skills, extensive experience working with industrial mechanical systems, and good communication skills. Ultimately, a top-class mechanic can solve a broad range of problems, ensure the smooth running of a building’s maintenance systems, resolves issues quickly and efficiently and is ready to support project and manufacturing activities. Our ideal candidate has at least five years of professional experience, current mechanic certifications, and a flexible schedule. Responsibilities: • Monitors and maintains facilities’ maintenance support equipment., • Monitors facilities to ensure a safe, clean, efficiently operating, and productive work environment., • Assist Facilities Management with schedules and organizing any service work performed by technicians, vendors, and contractors relative to repairs, cleaning and security operations., • Perform maintenance repairs for basic plumbing, minor electrical, carpentry, HVAC systems, roofing and general landscaping., • Conduct regular building rounds and submit reports to Facilities Management to ensure your area of responsibility is clean and that maintenance crews are keeping their assigned systems and equipment in working order., • High school diploma or GED., • Associate degree preferred., • Prior military experience a plus., • 5-10 years of solid experience as a maintenance/mechanic in a manufacturing environment., • Plumbing knowledge to address leaks., • Carpentry ability to handle basic repairs around the building., • Interpersonal skills to interact with employees and visitors to the building in a pleasant manner., • Attention to detail to ensure that all jobs are completed in an exemplary manner and any potential hazards or warning signs of problems are not overlooked., • Must be a well-rounded individual who can perform a variety of service and maintenance tasks each day., • Ability to interact effectively as a leader or a team member and work collaboratively with other departments., • Mechanic/maintenance qualification certifications a plus., • Familiarity with commercial and industrial mechanical systems., • Excellent problem-solving skills., • Physically strong and able to stand for long periods., • Excellent communication skills., • Valid driver’s license., • Able to work independently or with a team., • Excellent customer service skills. US EEO Statement Intuitive Machines is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.

Job Description Our motto, "We are Ladies and Gentlemen, serving Ladies and Gentlemen", is evident in every interaction with our customers, co-workers, and team mates. We strive to find the best and brightest talent for each position within our organization, enabling the unique qualities of each individual to shine and compliment the entire team. Objectives Facility/Building maintenance position is responsible for preventative maintenance, major and minor repairs of all types for the building, hangars, and mechanical equipment. This position is responsible for all aspects of facility maintenance to provide a comfortable, clean, and safe facility for customers, pilots, and employees. Responsibilities and Duties • Responsible for ensuring all projects are completed in a safe and timely manner as to not affect the customer or team member experience., • Evaluate and repair the broad array of facility-related maintenance, including HVAC, plumbing, electrical. Carpentry, painting, masonry, and roadways. When necessary, coordinate with appropraite sub-contractor., • Assist in strategic planning and execution of new constructions, architectural and design activities., • Conduct inspections of building and grounds identifying maintenance and safety problems implementing corrective action as needed., • Schedule work order, place vendor bids for materials, select vendors and prepare requisitions., • Maintain OSHA Safety Standards and other policies and procedure of Million Air., • Maintain a positive team oriented attitude., • Act as a liaison with state and local officials having regulatory oversight and inspection responsibilities. Competencies • Working knowledge of basic building maintenance, • Communicate with customers and employees in person, on phone, and through radio communications, • Must be able to interpret printed and computerized maintenance manuals., • Must be able to operate a motor vehicle and be insurable by our insurance company (Requires clean driving record, • Write legibly to complete forms/paperwork as required Work Environment This position works outside in all types of weather conditions with possible contact with both moving and non-moving aircraft. This position may be exposed to hazardous noise levels, chemicals, fumes, and machinery. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job, to include but not limited to: • Must be able to lift 75 pounds, • Possible exposure to hazardous noise levels, chemicals, fumes, and machinery, • Outside work in all types of weather conditions Travel No travel is expected for this position. Education, Experience, and Eligibility Qualifications • Minimum four (4) years of experience in construction related field, • High School Diploma, • Ability to work evenings, weekends, and holidays, • Acceptable driving record, • Ability to pass a background check Million Air is an Equal Opportunity/Affirmative Action Employer/Protected Veteran/Disabled Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this position. Duties, Responsibilities, and activities may change at any time with our without notice.

Job DescriptionLane Valente Industries is a Leading International construction and facility maintenance company with offices throughout the U.S. and Canada. We have a strong in-house group of field technicians that services top U.S. corporations and are supported by top notch managers in our offices. We are always looking for talented people driven to be highly productive members of the team with an emphasis on integrity and learning. CURRENT OPPORTUNITY: General Maintenance Technician National maintenance and construction firm is recruiting General Maintenance Technician, willing to travel for full-time commercial construction projects across the United States. JOB REQUIREMENTS: Tradesperson must be proficient in following skills: Carpentry • partition framing metal/wood studs, installation of basic cabinetry/countertops, installation of doors/windowPainting, • interior & exteriorFlooring, • replacement/installation of sinks, faucets, toilets and basic drainage and water lines (licensed plumbers encouraged to apply)Electrical, • replacement installation of light fixtures, switches and outlets, capable of basic data connections and able to diagnose minor electrical problems (licensed electricians encouraged to apply) HVAC, • Knowledge of refrigeration, PM Service callsESSENTIAL FUNCTIONS:, • Commercial renovations/buildouts, • Basic computer skills, • Ability to follow OSHA requirements, • Presentable and possess the ability to communicate with customers to build relationships, • Detailed when it comes to repairs made, including but not limited to measurements, pictures, recommendations for repairs and quotes, • Ability to work overtime and/or on-call as workload and emergency issues dictate, • Willing and able to travel and work overnight shifts throughout the United States when needed.EDUCATION/EXPERIENCE:, • Minimum of 3 years of experience in construction or commercial maintenance, • Supply basic construction hand tools, • OSHA 10hr or the completion of OSHA 10hr within 3 months of employment (paid by employer)BENEFITS OFFERED:, • Medical, Dental & Vision Insurance, • 401-K Retirement plan with generous company match, • Paid vacations v7jOxUXfnG

Job Description Classification: Non-Exempt Pay: $22-30/hr Schedule: Monday- Friday, 4:30 AM-1:00 PM. Some Saturdays and holidays included. We are Alsco Uniforms. We’ve been working hard for our customers since 1889 when we invented the uniform and linen rental industry. Alsco Uniforms has grown into a worldwide leader serving over 350,000 customers in 13 countries. It’s our job every day to make every aspect of the customer experience better. Whatever our customers need, Alsco Uniforms finds the answers that work for them. Our employees are the heart and soul of Alsco Uniforms. As a result, we have a long history of strong financial performance, continuous improvement, and customer service. We’re seeking driven professionals with ambition to grow within our company. We’d love to talk to you about how you can fit into our team of diverse individuals and how your hard work will be rewarded with competitive pay and benefits and ongoing career development. Join our team and build your career with Alsco Uniforms! Job Summary: The Maintenance Technician is responsible for installing, repairing and maintaining large industrial textile processing equipment, as well as facility maintenance. Tasks include start-up and shut-down procedures, electrical troubleshooting, maintaining and operating boilers, welding and cutting, hydraulics, pneumatics, mechanical, and other systems. This position reports to the Chief Engineer. Our full-time employees enjoy: 401K Plan with Company Match Medical, Dental, Vision, FSA/HSA Life Insurance, Disability Insurance Vacation, Sick Time, Holidays Choice of Global Cash Card or Direct Deposit Career Advancement Learning & Development Opportunities Inclusive and Diverse Team Environment Essential Functions: • Installs, repairs and performs preventative maintenance on industrial processing equipment, water levels, water systems and other equipment and systems., • Troubleshoots electrical issues., • Responds to daily maintenance requests in a timely fashion to minimize equipment downtime., • Provides emergency/unscheduled repairs of production equipment., • Diagnoses problems, replaces or repairs parts, tests and makes adjustments., • Looks for opportunities to continually improve maintenance processes., • Works with all plant personnel in a cooperative and professional manner., • Strictly adheres to all safety rules, policies and procedures required by Alsco, law, and what is recognized as common practice in the industry., • Ensures work is performed safely and efficiently., • Maintains technical knowledge by attending educational workshops and reviewing technical publications. Remains current on equipment and repair procedures and best practices., • Studies blueprints and manufacturers’ manuals to determine correct operation of machinery., • Proficient in reading electrical schematics., • Maintains accurate and timely records of maintenance performed., • Follows written and verbal instructions and performs other tasks as directed by supervision., • Complies with all Federal, State and local laws. Additional Functions: • May work with and support other branch personnel as required by supervision., • Drive and pick up parts, transport equipment, parts, etc. Qualifications: • Have and maintain a valid driver’s license and driving record free of chargeable accidents, speeding or other safety violations., • Minimum of two years maintenance engineering experience with specific knowledge of machinery, electricity, electronics, plumbing, hydraulics, pneumatics, welder and boiler applications., • Proficient in the proper use of power and hand tools., • Strong electrical troubleshooting ability of 3 phase 230 volt systems., • PLC programming experience., • Experience in carpentry, boiler repair, welding, and general facility repairs., • Good verbal and written communication skills in English, ability to comprehend and follow direction, perform basic math, good time management, • High school graduate or equivalency preferred., • Standing, sitting, walking, bending, stooping, reaching, twisting, kneeling, working in confined areas, reaching overhead, driving a forklift, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs, lifting and carrying up to 100 lbs, reading, writing, speaking, hearing. Typical Environmental Conditions: • Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature, noise, odors, humidity, lint and dust, in general offices or on outside grounds. Travel Requirements: • Occasionally, such as to procure parts. The Maintenance Technician must perform the essential duties and responsibilities with or without reasonable accommodation efficiently and accurately, and without causing significant safety threat to self or others. The statements made herein are intended to describe the general nature and level of work being performed by employees assigned to this job classification. They are not intended to be construed as an exhaustive and inclusive list of all responsibilities, duties, and/or skills required of personnel so classified. For a general description of benefits that are being offered for this position, please visit alsco.com/benefits. Alsco Uniforms is an Equal Employment Opportunity Employer. Candidates are considered for employment with Alsco Uniforms without regard to their race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status (specifically status as a disabled veteran, recently separated veteran, armed forces service medal veteran, or active duty wartime or campaign badge veteran), or other classification protected by applicable federal, state, or local law. Revised: 04/29/2022

Job Description Synergy Preserve LLC has a wide range of experience when it comes to renovating and maintenance. We specialize in property management and facility maintenance for residential and commercial properties. We are looking for some dynamic technicians who will represent Synergy Preserve LLC to its clients and customers and provide better service in the field. Overview We are seeking a skilled HVAC Technician to join our dynamic team. The ideal candidate will possess a strong mechanical aptitude and a passion for providing exceptional service in the heating, ventilation, and air conditioning industry. This role involves working on various HVAC systems, performing maintenance, repairs, and installations to ensure optimal performance and customer satisfaction. Qualifications • Must be experienced., • Minimum 2 years experience in HVAC, Appliance repair work, • Own tools and reliable vehicle (truck, van, or SUV), • Must complete a short onboarding interview., • Valid driver’s license and ability to work independently, • MUST to be located in the USRequirement, • Technicians who want routine maintenance work, not full-time employment, • Tradespeople who are self-motivated, communicative, and ready to handle straightforward tasks across rotating properties., • Appliance Repair (Microwave, Dishwasher, Store), • EPA Certification for HVAC techs (mandatory under new refrigerant regulations), • Must complete brief onboarding with vendor representative before receiving work, • Strong professionalism, punctuality, and communication skills., • Need to have necessary job tools.Benefits, • Pay: $25.00 - $50.00 per hour., • Opportunity to be a Full-time employer., • Flexible Schedule: Accept jobs that fit your availability, • Local Work: All assignments are dispatched based on your coverage area, • Perform general maintenance and repairs in various areas such as plumbing, electrical, carpentry, and HVAC, • Conduct routine inspections of facilities and equipment to identify any issues or potential problems, • Respond to work orders and prioritize tasks based on urgency and importance, • Fabricate or repair equipment as needed, • Supervise and coordinate external contractors for specialized repairs or projects, • Provide excellent customer service by addressing inquiries and resolving maintenance-related issues promptly, • Experience:- Proven experience in facilities maintenance or a similar role., • Strong mechanical knowledge and proficiency in various trades (plumbing, electrical, HVAC), • Ability to read and interpret schematics and technical manuals, • Welding experience is a plus point., • Excellent communication skills in English, both verbal and written, • Ability to work independently with minimal supervision, • Strong problem-solving skills and attention to detail Powered by JazzHR AfTlIYkyt6

Job DescriptionNow Hiring: Part-Time 1099 Contractors – HVAC, Plumbing, Electrical, Handyman Maintenance Company: Superior Contracting & Maintenance Location: Local Technicians in AL, AZ, GA, FL, NC, OK, SC, TN, & TX Contact to Apply: Text (NO CALLS send your Name, Trade(s), Location) +1 (470) 460-6859 About the Opportunity Superior Contracting & Maintenance is seeking insured, part-time 1099 contractors to complete rotating residential maintenance work orders. This is not a job board—you won’t pay for leads or listings. We receive jobs from our home portfolio partners, support their completion with our local contractors, and pay you directly for completed work. We’re a residential maintenance service provider partnering with property portfolios. Our ideal contractor is someone who has their own business or clients but wants to fill in their schedule with high-frequency, low-friction work throughout the year. How It Works • You receive work orders directly from us—no lead chasing, no marketing., • Jobs come with “not-to-exceed” (NTE) limits (typically $150–$350) to complete minor residential repairs, ideally on the first trip., • Larger jobs require an estimate prior to work., • Mechanical trades (HVAC, electrical, plumbing, appliance repair) are paid diagnostic trip fees of $65–$85, depending on complexity and trade., • Once work is verified, we issue fast direct deposit payments., • SUPERIOR PURCHASES ALL MATERIALS! What We’re Looking For • Part-time, insured independent contractors (1099), • Contractors who want routine maintenance work, not full-time employment, • Tradespeople who are self-motivated, communicative, and ready to handle straightforward tasks across rotating properties Available Trades We’re hiring for a variety of residential services: • HVAC (EPA Cert Required), • Plumbing, • Electrical, • Appliance Repair, • Carpentry, Drywall, Painting, • General Handyman & Punchlist Services Requirements • Valid General Liability Insurance (COI required), • Worker’s Comp preferred but not required (Deduction can be made to offset coverage gap), • EPA Certification for HVAC techs (mandatory under new refrigerant regulations), • Must provide W9 and valid Tax ID, • Must complete brief onboarding/training call with vendor rep before receiving work, • Reliable vehicle (truck, van, SUV) + necessary tools, • Ability to navigate a mobile portal/app for job management - work is received and closed through online portal., • Strong professionalism, punctuality, and communication skills. Disqualifiers • No active insurance, • Missing EPA certification, • Unwilling to complete onboarding/training call, • Poor communication or failure to follow through on jobs Key Benefits: ✅ No Fees: This is direct, paid contract work—not a lead service. ✅ Flexible Schedule: Accept jobs that fit your availability. ✅ Local Work: All assignments are dispatched based on your coverage area. ✅ Fast Pay: Get paid after completion and quality check—no waiting weeks. To Apply Text your name, trade(s), and location to:

Job Description Location: Houston, TX Reports to: Maintenance Supervisor Main Responsibilities: • Provide hands-on mechanical troubleshooting and service of automated production equipment including: hydraulics, pneumatics, pistons, bearings, gear reducers, and pumps, • Fit bearings, align gears and shafts, attach servo motors and connect couplings to precise tolerances; mechanical overhaul and adjustment of machinery. Assist in day-to-day support of operators for adjustments, setups, and change overs; demonstrates a willingness to help other team members, • Provide electrical troubleshooting and service of AC & DC motors, variable speed drives, electrical panels and wiring, • Provide electronic troubleshooting and service of actuators and sensors, • Provide facility repairs such as, plumbing, carpentry, light electrical repairs, machine PM's, lubrication of production equipment, • Equipment repairs on welding machines, forklifts, shears and plate rollers., • Review assigned maintenance work orders and complete maintenance and repair records in a timely manner Secondary Responsibilities • Guide and work with service contractors while transitioning repair, routine preventive maintenance and inspection work to in-house., • Manage the spare parts and preventive maintenance programs, • Participate in new manufacturing equipment projects from initial concept, through the design and development stage, to the testing of one or more prototypes, to final manufacture, installation and commissioning, • Observe, evaluate and suggest operational/design changes or maintenance needs based on performance and quality control limits to maintain or increase efficiency of manufacturing equipment., • Collaborate and provide information/feedback to engineering group while working to resolve issues, • Eventual training of maintenance technicians as staff size grows, • Chiller system; catalyst washing equipment; process pumps, valves and hoses; air compressor/dryer systems (secondary), • Pumps (optional), • Blowers (optional), • 3 phase motors, low voltage up to 3-phase 480V (optional) Education and/or Licensing Requirements: • High school diploma or GED (required), • Formal training in mechanical systems, electronic systems and controls, PLC programming/troubleshooting, electric power and electrical motors Work Experience: • Experience working in a manufacturing environment (required), • Demonstrated cross-functional ability in troubleshooting, modifying, repairing and performing preventative maintenance on automated production equipment with PLC/HMI, electro-mechanical, pneumatic and hydraulic components (required) Technical Skills: • Ability to follow mechanical drawings, operations manuals, manufacturer's instructions, engineering specifications, and written/verbal descriptions (required), • Ability to troubleshoot and repair mechanical equipment, including the ability to disassemble machinery to remove parts and make repairs, reassemble, recommission (required), • Ability to follow electrical schematics and wiring diagrams, and use of electrical troubleshooting tools to troubleshoot and repair electrical wiring, instrumentation and controls (required) Physical Demands/Abilities: • Ability to lift 60 pounds, • Ability to Stand for long periods of time, • Ability to respond to urgent mechanical or electrical breakdowns during non-standard business hours Cultural Values and Requirements • Safety awareness - must understand and demonstrate the behavior that safety of yourself and other coworkers is essential, and must adhere to all safety policies and procedures, • Dependability - regularly arrives to work on time, returns timely from breaks, meets attendance guidelines and consistently arrives on time and prepared for team meetings, • Team work - ability to effectively work within a team environment to ensure timeliness of job completion, exhibiting a friendly and positive demeanor toward co-workers; ability to work cooperatively with machine operators to achieve quality products and maintain production throughput on equipment, • Communication - ability to communicate clearly and concisely with operators, plant manager, engineers, service contractors, using both the spoken and written work, as well as the ability to actively listen and comprehend communication from others., • Ethical - ability to demonstrate, conduct, and conform to a set of values and accepted standards, such as honesty, integrity, reliability, and accountability, • Detail oriented - ability to pay attention to the minute details of a project or task, and perform work accurately and thoroughly Working Conditions: • Manufacturing production environment., • Automated/Manual production machinery, • Periods of high ambient temperatures and excessive noise Benefits • Medical, dental, vision, life and disability, • 401k plan, • 11 paid holidays, • Paid vacation and sick leave Equal Opportunity: MIRATECH is an equal opportunity employer and supports a diverse and inclusive workforce. All employment practices are based on qualification and merit, without regards to race, color, national origin, ancestry, religion, age, sex, gender identity, sexual orientation or preference, marital status or spousal affiliation, physical or mental disability, medical conditions, pregnancy, status as a protected veteran, genetic information, or citizenship within the limits imposed by federal laws and regulations. Job Posted by ApplicantPro

Job Description Job Responsibilities • Ensure that changes and problems get documented and communicated., • Carry out assigned tasks and work orders with minimum direct supervision., • Communicate with the office team and FOMs on open issues and progress of work assigned to oneself, • Successful execution of assigned programs/work orders as they relate to cost, quality, timing and customer satisfaction., • Maintain cleanliness and organization of assigned work area., • Effectively document and communicate work required and executed out in the field., • Ability to work a flexible schedule, including “on-call” availability Required Work Experience & Skills • Proficient knowledge and understanding of maintenance, • General Skill Set in the Following:, • Carpentry, Plumbing, Electrical, HVAC, Painting, Drywall Repair, and Flooring Repairs (highly proficient in one or several fields is highly preferred), • High school diploma, or equivalent certification, • Related vocational education or certifications preferred, • Proficient computer and mobile phone skills (preferably iOS and Android), • Intermediate proficiency reading assembly and blueprint drawings., • Proven mechanical aptitude, • Proven ability to accept direction and complete tasks as assigned while working as part of a team or individually., • Ability to provide own hand tools and toolbox suitable for the job (a list of those recommended will be provided)., • Ability to lift 50 lbs. and transport a load up to 80 lbs., • Capability to apply up to 200 pounds of torque, • Ability to work bending, stooping, standing, sitting, and lying down About Talent Strategy The Skilled Trades, Engineering, and Manufacturing teams at Talent Strategy have teamed up with a well-known firm to assist in the recruitment of their open positions. Talent Strategy is a professional search firm specializing in the Skilled Trades, Engineering, and Manufacturing industries. Having direct work experience in the industry, and over 50 years of combined professional search and recruiting experience, our recruiters are experts in their arena. It is our commitment to partner with the best and brightest, not only the most readily available candidates on the market. Our expertise and knowledge in the Skilled Trades, Engineering, and Manufacturing industries allow us to be an effective partner, and our clients continually choose Talent Strategy because of the outstanding caliber of candidates we recruit on their behalf. #ALLJOBS

Job DescriptionCompany Description KIPP Texas Public Schools is a network of 54 public charter, open-enrollment, pre-k-12 schools educating nearly 32,000 students across Austin, Dallas, Houston, and San Antonio. Together with families and communities, our mission is to create joyful, academically excellent schools that prepare students with the skills and confidence to pursue the paths they choose - college, career, and beyond - so they can lead fulfilling lives and build a more just world. Founded in Houston in 1994 and operating as KIPP Texas since 2018, we are looking to hire a diverse team of dynamic, collaborative, and dedicated individuals with an unyielding belief that every child will succeed. Join a Team and Family with an unwavering commitment to creating classrooms, offices, and communities rooted in belongingness, academic success and joy. If you are passionate about joining a mission and values-driven community who wants every child to want to run to school, the KIPP Texas Team and Family is for you! KIPP Public Schools is a national network of public charter schools that prepares students with the skills and confidence to create the future they want for themselves, their communities, and us all. We are a network of 278 schools with nearly 16,500 educators and 190,000 students and alumni. You can see all our job opportunities at . Job Description The Opportunity The Facilities Technician is part of the Facilities Department and is responsible for performing repairs, preventative maintenance, and improvement projects at one or more assigned facilities. The Facilities Technician will work on various systems, including HVAC, electrical, plumbing, carpentry, and grounds maintenance. The Facilities Technician will work under the direction of an experienced Sr. Facilities Technician and/or Campus Facilities Manager, and will have opportunities for on-the-job training and formal professional development. As a key member of the statewide Facilities team, the Facilities Technician will report to the Sr. Facilities Technician. This role furthers the mission of KIPP by providing a clean and safe learning environment for students and faculty. Key Responsibilities • Responsible for maintaining the campus buildings and grounds, • Manage and maintain all building systems: Burglar and fire alarms, elevators, HVAC, irrigation systems, and all other systems., • Responsibilities include basic painting, pest control, lawn care, plumbing and basic electrical repairs., • Execute work orders to high standards of quality and timeliness., • Communicate with school staff and departments to coordinate completion of work orders and setup for campus events., • On call response during and after operating hours., • Perform regular inspections and do whatever it takes to resolve potential problems before they escalate., • Attend meetings, professional development meetings and training session “Continuous Learning”Qualifications Skills and Qualifications • 1-3 years of facilities or maintenance related experience., • Knowledge of building systems and the maintenance and repair thereof., • Expertise in or technical knowledge of HVAC, electrical and/or plumbing systems highly preferred., • Skill in maintaining positive relations with others., • Meticulous attention to detail with an ability to produce high quality work in a dynamic environment., • Verbal communication and interpersonal skills required to work with a broad group of stakeholders with different interests and needs., • Basic computer skills required; experience in Microsoft Outlook and/or facilities work order software preferred., • English fluency is required; Spanish is a plus., • Reliable transportation required (may be required to drive to different facilities or to pick up supplies during the workday)., • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions., • Considerable time is spent at a desk using a computer/laptop, • Ability to travel to various locations, travel time approximately rarely Additional Information Compensation and Benefits: The starting salary for this position is $37,000 and placement in the salary range is commensurate upon experience and internal equity. As a full-time KIPP Texas employee you are eligible to participate in all KIPP Texas’ benefit plans. KIPP Texas offers a robust variety of benefits choices with competitive rates, including medical, dental, and vision options, life insurance, and disability plans. KIPP provides equal employment opportunities for all applicants and employees. As an equal opportunity employer, we hire without consideration of race, religion, creed, color, national origin, age, gender, sexual orientation, marital status, veteran status, or disability.

Job Description This is a unique opportunity to join a team of highly motivated property management and operation professionals. Investors' Property Services is a 45-year-old, privately held full service commercial and residential real estate company. The work is fast paced, exciting and rewarding and we execute at the highest level. An employee focused company that puts people before profits. We are looking for a Make Ready Technician to undertake the maintenance activities on behalf of property owners. The successful candidate will encompass the following skills: SUMMARY: This position is responsible for providing skilled and unskilled maintenance tasks to maintain and improve property function for clients. DUTIES AND RESPONSIBILITIES: • Performs basic carpentry, electrical, basic plumbing, and installation of appliances and fixtures in property., • Receives written work orders or verbal instructions from supervisor., • Paints interior and exterior walls and trim., • Learns more about the maintenance craft under a lead's supervision., • Operates pressure wash equipment to maintain parking lots and sidewalks., • Learns how to repair buildings' plumbing, HVAC, and electrical systems, including replacing worn or defective parts such as switches and fuses., • Installs light fixtures and power supply outlets., • Maintains and repairs wood parts of buildings., • Replaces worn or damaged parts such as hoses, wiring, and belts, in machines and equipment such as truck, street sweeper, and riding mower., • Assists other departments with moving furniture and unloading and storing supplies and cleaning facilities., • Performs other related duties as assigned by management. SUPERVISORY RESPONSIBILITIES: This job has no supervisory responsibilities Job Type: Full-time

Job Description Why Morgan Group? There’s more to Morgan Group than our 65+ multi family properties. We celebrate diversity and are committed to creating an inclusive environment for all employees. At Morgan Group, it’s about the people who work for Morgan, our residents, our construction team, and adhering to our key values that make us who we are as a company. Our success comes from finding, retaining, and supporting the highest quality talent by offering full-time employees a variety of benefits including: • Advancement opportunities, • Training, • Low-cost Medical, Dental, Vision, • Flexible Spending Accounts (Medical, Limited Purpose & Dependent Care), • Health Savings Account, • Voluntary Life Insurance, • Long-Term Disability Insurance, • Company Paid Life Insurance, • Company Paid Short-Term Disability Insurance, • 401K (Traditional & Roth) with Company Match, • Employee Assistance Program, • Paid Time Off plans including:, • Vacation, • Sick, • Floating Holiday, • Bereavement Leave, • Holiday Schedule, • Referral Bonus ProgramThis position is also eligible for renewal commissions and quarterly bonus program. How does Morgan Group benefit you? The Morgan Group provides you with an excellent opportunity to learn about the multi-family industry and to grow in your career you never thought possible. Whether you are interested in Property management, maintenance, construction, or development, at Morgan, you’ll get the training and support from your team that you need to excel in your role and reach your full potential. What You'll Do Essential Job Functions: • Adhere to MORGAN’s Maintenance, Emergency Procedures, Leasing and Marketing, Management and Operations manuals along with the Team Member Handbook., • Perform all tasks in a safe manner and provide customer service., • Handle service requests, apartment turnovers and assist with outside vendors as assigned by the Lead Maintenance., • Assist in all phases of apartment and property maintenance, including plumbing, carpentry, appliance repair, electrical and heater maintenance, painting, etc., • Maintain an organized work place and shop., • Report parts or supplies that need to be ordered to the Lead Maintenance., • Inventory supply shipments and puts away stock, giving packing slip to the Community Manager., • Report issues involving safety, property maintenance and unresolved maintenance issues to Lead Maintenance in a timely manner., • Assist in the upkeep of the exterior and interior of the property., • Responsible for vehicle (golf carts) and pool/spa maintenance and upkeep., • Ensures lighting replacement and trash maintenance of outside grounds. Other tasks as assigned by your supervisor, not listed as essential job functions. Physical Requirements: • Will need to be on feet (66% to 100%)., • Will need to perform the following physical activities (66% to 100%). Example: bend/stoop/squat/kneel Perform routine maintenance/repair duties such picking up debris. climb stairs Routine duties require access to upper floor apartments and interior apartments with multiple levels. Will need to climb and work off a ladder. push or pull Move equipment, appliances, and open/close doors. reach above shoulders Perform routine maintenance repairs, paint, stock, and remove equipment. grasp/grip/turning and finger dexterity Handle maintenance tools, nails, and open/close ladders, perform routine maintenance/repairs, use telephone, pager, 2-way radio. Vision Requirements: • Will need to observe areas needing attention/correction., • Read cautionary labels, respond to written instructions from staff., • Constant requirement to give information and receive instructions from residential management (33% to 66%)., • There may be an occasional need to utilize personal transportation to pick up replacement parts and supplies from vendors (1% to 33%)., • Ability to be on-call and be on the property on short notice., • Constantly outdoors, in all weather conditions, often for extended periods of time (66%-100%)., • Frequently indoors in all weather conditions that may make the environment uncomfortable (hot in summer, cold in winter). (33% to 100%), • Occasional exposure to paint fumes, solvents adhesives, etc. (33% -100%). Example – apartment during painting and/or immediately during or after turnover. Team Member must wear Personal Protective Equipment (N-95 Mask), rubber gloves and eye protection, when necessary., • Occasional need to work in awkward confining positions (1% to 33%).

Job Description SOLIDAGO RESIDENTIAL SERVICES POSITION DESCRIPTION POSITION: Maintenance Team Leader (Full-Time, Non-Exempt) REPORTS TO: Community Manager COMPENSATION: Hourly Rate, plus Benefits and Bonus eligibility LOCATION: On-Site, Houston, TX SUMMARY The Maintenance Team Leader is primarily responsible for protecting, maintaining, and enhancing the value of the community while also maximizing the living experience for residents and the community. This is accomplished by ensuring that all resident maintenance issues are resolved expertly and efficiently. RESPONSIBILITIES (Including but not limited to) • Ensure that the property maintains exceptional curb appeal by keeping the community grounds and buildings clean and properly maintained., • Perform routine maintenance and repairs in apartments and common areas,, • including electrical, plumbing, HVAC, carpentry, and appliance repair., • Consistently and genuinely demonstrate exemplary principles of customer service and teamwork., • Maintain a safe, tidy, and sanitary clubhouse, office, model, hallways, and all other common areas., • Ensure that the property is free of trash, debris, and animal waste., • Ensure that the grass and landscaping are well-maintained, including the watering of flowers., • Ensuring the best possible appearance of each apartment prior to new residents moving in., • Advise supervisor of items needing additional attention in the apartment, i.e., ripped carpet, torn linoleum, window or door repair, etc., • Assist with apartment turnovers as directed., • Communicate with the Community Manager regarding any problems with maintenance or curb appeal that require further attention., • Respond appropriately to emergencies, according to policies and procedures., • Participate in and attend all required in-service training sessions., • Ensure understanding and compliance with all policies and procedures., • Contribute to resident satisfaction by ensuring that customers’ expectations are met or exceeded., • Provide emergency maintenance coverage as part of an on-call rotation (if applicable). QUALIFICATIONS • 3-5 years of relevant industry experience; property management experience is a plus., • Must have excellent customer service skills, strong attention to detail, and basic maintenance skills., • Working knowledge of pool service/maintenance is required., • Basic knowledge of plumbing, electrical, HVAC, and appliance repair., • High school diploma or GED equivalent preferred., • Must be able to lift a minimum of 75 lbs. and work 8-12 hour standing shifts., • Must be able to work weekends and be available for on-call emergencies., • Ability to embody the Solidago Culture every day., • Valid Driver's License Preferred Certifications (Not Required): • HVAC certification (EPA Type I or II), • CPO (Certified Pool Operator) BENEFITS • Medical, Dental, and Vision Insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • Paid Time Off (PTO), • Paid Holidays, • Dental, • 401k Retirement Plan, • Employee Assistance Program (EAP), • Competitive bonus structure, • Ancillary Benefits: Pet Insurance, Gym Membership Reimbursement, Parental Leave etc. WORK CONDITIONS You are required to work both inside and outside of the office and in all areas of the residential property, including amenities, and have frequent exposure to outside elements where temperature, weather, odors, and landscape may be unpleasant and/or hazardous. PHYSICAL DEMANDS: To successfully perform the essential functions of this role, the team member must be able to engage in routine physical activities such as standing, walking, climbing, stooping, squatting, and using hands for typing and handling materials. The position requires the ability to access all areas of the property—both interior and exterior—in varying weather conditions, including rain, snow, heat, and wind. Team members must be capable of lifting or moving items up to 20 pounds and possess adequate visual abilities, including close and distance vision, color and peripheral vision, depth perception, and the ability to adjust focus. Occasional travel may be required for training, property support, or other job-related needs. This job description is not intended to be an exhaustive list of all duties. Team members are expected to follow additional instructions and perform other related tasks as assigned by their Team Leader. Additional responsibilities/tasks within the position's purpose may be assigned. LDG Development LLC & its affiliates reserve the right to change job descriptions at any time, with or without prior notice, based on business conditions/needs.

Job DescriptionPosition Description: Position Summary The Maintenance Technician is responsible for performing skilled and general maintenance work to ensure the apartment community is safe, attractive, and fully functional. This role supports the Maintenance Supervisor by handling daily service requests, preventative maintenance tasks, and unit turns while providing excellent service to residents. The Maintenance Technician plays a vital role in sustaining Bonner Carringtons high standards of quality, safety, and resident satisfaction. Key Responsibilities Maintenance & Repairs \tRespond promptly to resident service requests and complete work orders efficiently and professionally. \tPerform general repairs including plumbing, electrical, HVAC, appliance maintenance, carpentry, painting, and other basic building systems. \tAssist with make-ready of vacant apartments, ensuring units meet Bonner Carrington standards before new residents move in. \tSupport upkeep of common areas, amenities, and exterior property features. Preventative Maintenance \tConduct routine inspections and preventative maintenance as assigned by the Maintenance Supervisor. \tParticipate in scheduled maintenance programs such as alarm battery replacements, HVAC filter changes, and seasonal property checks. \tIdentify and report potential hazards, safety issues, or major repair needs to the Maintenance Supervisor. Safety & Compliance \tFollow all OSHA, EPA, Fair Housing, and company safety guidelines. \tMaintain safe work practices and ensure tools, equipment, and work areas are kept in proper condition. \tSupport compliance with property inspections, risk assessments, and incident reporting requirements. Team & Resident Service \tWork collaboratively with the Maintenance Supervisor and team to ensure timely completion of tasks. \tCommunicate professionally with residents, provide updates on service requests and ensuring satisfaction with completed work. \tParticipate in on-call rotation for after-hours emergency maintenance. Qualifications \tHigh school diploma or equivalent required; technical certifications or trade school preferred. \t13 years of experience in apartment, facilities, or building maintenance preferred. \tBasic knowledge of electrical, plumbing, HVAC, carpentry, and appliance repair. \tEPA Section 608 HVAC Certification preferred; must be willing to obtain if not currently certified. \tAbility to safely operate tools, equipment, and machinery. \tStrong customer service skills and ability to work effectively in a team environment. \tFlexibility to work evenings, weekends, and participate in on-call rotation. Core Competencies \tTechnical Skill: Ability to perform a wide range of maintenance tasks with quality and accuracy. \tCustomer Focus: Provides friendly, professional service to residents. \tDependability: Responds to requests promptly and follows through on assignments. \tTeamwork: Supports the Maintenance Supervisor and collaborates with peers. \tSafety Awareness: Prioritizes safety for self, team, and residents in all tasks. Why Bonner Carrington? At Bonner Carrington, our Maintenance Technicians are the heart of the resident experience. Your work ensures our communities run smoothly, look their best, and feel like home. Youll be supported by a strong team, provided with opportunities for training and growth, and empowered to take pride in creating a safe, welcoming environment for residents and staff. Additional Information: We Elevate Communities to Enhance Lives At Bonner Carrington, we believe property management is more than maintaining buildings. It is about creating vibrant, welcoming homes where residents feel safe, valued, and deeply connected. We understand that seamless operations are the cornerstone of a thriving community, and this is why we dedicate ourselves to providing comprehensive operational support that empowers onsite teams to focus on what truly matters: delivering exceptional service and creating spaces that feel like home. We are passionate about the opportunity to collaborate with you, building communities that elevate lives and foster connection. Together, we can create something extraordinary. The Bonner Carrington Team

Job DescriptionAs our Building Services Technician, you will perform facility maintenance services, repair work, minor modifications and urgent construction services for specialized commercial construction projects. Successful team members in this role have a proven carpentry background, are self-motivated and exhibit a high standard for service, professionalism and safety.What you'll do • Technical Skills: Skilled in rough and finish carpentry, painting, and basic concrete work, with knowledge of building codes, ADA standards, and commercial-grade materials., • Problem Solving & Material Sourcing: Skilled at diagnosing issues, implementing cost-effective repairs, and efficiently sourcing quality materials through accurate estimating, vendor coordination, and budget-conscious purchasing to maximize project profitability., • Safety & Compliance: Consistently follows OSHA and job site safety protocols, properly uses PPE, and maintains clean, hazard-free work areas., • Communication & Collaboration: Communicates effectively with clients, supervisors, and team members to ensure smooth project execution and strong relationships., • Planning & Time Management: Efficiently organizes tasks, meets deadlines, and completes work to company standards with minimal supervision.What you bring to the team, • 3-5+ years of commercial carpentry and/or facilities maintenance experience., • Valid driver’s license., • Ability to work flexible hours daily., • Bilingual in English and Spanish preferred., • High school diploma or GED preferred., • Proficiency with technology and online applications (i.e., computer, tablet, scheduling software, internet, email, calendar, PDF).Essential Functions, • Perform physical activities such as twisting, stooping, bending, squatting, kneeling, crawling, climbing ladders and stairs, walking on uneven ground, working on scaffolds above ground, and in ditches below ground. Up to seven hours of an eight-hour shift are spent standing., • Work comfortably in confined spaces without fear and demonstrate the ability to read GHS labels on containers through color recognition., • Have depth perception to identify hazards such as excavations and to hear horns or sirens from moving equipment., • Exhibit good finger manipulation skills for precise tasks., • Climb on light and heavy equipment, carry, and use hand tools effectively., • Handle constant lifting of 10 lbs, frequent lifting of 25 lbs, and a maximum single-person lifting capacity of 50 lbs (assistance required for items over 50 lbs). Tasks may involve reaching at, above, or below shoulder height., • Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.Work Environment, • Construction site environment. You may be exposed to noise, dampness, heat, cold, dust, fumes (occasionally, but always well-ventilated), chemicals (will work with, but normally won’t work in a chemical environment) and confined spaces (on occasion). Temperatures range from 25º to 115ºF., • Wear puncture-resistant footwear, long pants, and shirts with four-inch sleeves., • Use all required PPE, including hard hats, safety glasses, gloves, high-visibility vests, earplugs, fall protection gear, and respiratory equipment, as provided., • Maintain a professional, clean, and well-groomed appearance.

Job Description Why Adara Communities: Adara was envisioned and created from 40 years of experience and incorporated with the determination and vision to join cutting edge technology with customer service. Adara's philosophy in taking care of our customers and our associates while considering the best interests of the investors and community at large, believe that each member of our team truly makes our work successful. With everyone's commitment, anything is a possibility. About Domain at Kirby • Apartment Make Ready experience REQUIRED, including minor electrical, plumbing and construction/carpentry experience, • Ensure that all vacated apartments are thoroughly restored to "market ready" status in a timely manner and ready for new move-ins, • Repairing and treating structures such as showers, sinks, appliances, doors/cabinets, walls and building exterior; change bulbs, replace bad lights, plugs, switches, etc, • Check locks and keys, re-key if necessary. Check weather stripping, replace/repair, if necessary., • Performs all repairs exterior/ interior painting and caulking, light drywall repair related to interior walls and doors (i.e., patch sheet rock, tape and float, shoot acoustics, apply texture, sand re-varnish doors), • Perform grounds work: grounds trash/debirs pick up, sweeping, pressure washing, blow breezeways and parking lots, • Must have own set of basic hand tools, • Must be able to lift a minimum or 40-50 lbs., • Have a strong work ethic with reliability and dependability, • Have reliable transportation to and from work, • Competitive Pay, • Medical, Dental, Vision Insurance, • Rental Housing Discounts Location: 1333 Old Spanish Trail, Houston, TX 77054, USA Job Posted by ApplicantPro

Job Description Atlantic Pacific Companies is a dynamic industry leader, with a growing and diverse portfolio of properties throughout Florida, Georgia, Texas, California, North Carolina, and Washington, D.C. We are looking for passionate people who enjoy challenges and helping others. Does this sound like you? Join us! Our Company is seeking an experienced and highly motivated Apartment Maintenance Technician for our Market Rate Apartment Community, Vintage Park Apartments, of 324 units in Houston, Texas. Job Type: Full-Time Job Description Summary: The Maintenance Technician performs routine maintenance in individual apartments, common areas and amenity areas. Prepares vacant units for new move-ins. Performs routine preventive maintenance. Assists in various cleaning functions and assists in monitoring the grounds. Maintains and repairs physical structures of buildings and maintains grounds by performing the following duties. Responsibilities: • Maintains and repairs buildings: areas of responsibility include, but are not limited to: electrical, plumbing, carpentry, HVAC, landscaping, painting, cleaning, appliances, pools, utilities, elevators, fencing/gates, and fire systems., • Responsible for completing all service requests/ work orders at the direction of the maintenance supervisor or property manager as required within 24 hours., • Complete apartment service tickets and log all assigned work orders accurately and in a timely fashion., • Manage vacant apartments by preparing them through the turnover process so apartments are ready to lease to new prospects. The work includes the maintenance of the unit, painting, cleaning and carpet cleaning., • Replaces worn or damaged parts such as hoses, wiring, and belts, in machines and equipment such as truck, street sweeper and other equipment used within the maintenance department., • Assists in ordering supplies for the property., • High School diploma, or GED equivalency, and minimum of 1-2 years direct experience as a Make Ready or Maintenance Technician for an apartment community, or equivalent combination of education and experience., • EPA I or II, Universal or HVAC certified is required., • CPO Certification is a plus and experience maintaining pools is required., • Must have supervisory experience., • Thorough understanding of electrical, plumbing, HVAC systems, carpentry, landscaping, painting, cleaning, appliances, utilities, elevators, fencing/gates, and fire systems., • Experience with Onesite, Yardi, or other property management software is a plus For more information, please visit Our Website Follow Us: Facebook LinkedIn Twitter Atlantic Pacific Companies is a drug-free workplace. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Disclaimer: The tasks and responsibilities listed are not the only ones applicable to the positions

Job Description Stone Mountain Management is a privately owned, multi-family property management firm. We are seeking an experienced Apartment Maintenance Technician to join our team of property management professionals in the Houston area. The Maintenance Technician's role is to assist the Maintenance Supervisor in maintaining the physical integrity of our apartment communities. Duties and Responsibilities • Completion of work orders for apartment unit repairs., • Perform routine preventative maintenance., • diagnose and repair appliances, • A/C and Heating systems, • Plumbing, insulating, roofing, pool maintenance, flooring, • Basic carpentry, painting, and drywall repair, • changing locks, rekey, • boiler, gas, and electric water heater systems, • electrical repairs, • Requires legal authorization to work in the United States, • Ability to communicate effectively, both written and verbal., • On-call coverage for emergencies after hours, on weekends, and on holidays., • Ability to respond and remedy maintenance issues promptly., • Physical strength necessary to lift and/or move up to 50lbs, • High School Diploma and certification from an accredited trade school are preferred., • EPA Type I, Type II, or Universal certification preferred., • Must have a valid driver’s license and dependable transportation., • We offer competitive pay commensurate with experience and skills., • Medical insurance, • Dental and Vision insurance, • 401k planning and pre-tax contributions, including matching component., • Life and Disability insurance, • Employee Assistance Programs (EAP), • Vacation, Sick leave, and paid holidays Job Type: Full-time Salary: $18.00 - $25.00 per hour, depending on experience Benefits: • 401(k), • 401(k) matching, • Dental Insurance, • Employee assistance program, • Flexible spending account, • Health insurance, • Life insurance, • Paid time off, • 8-hour shift with 1-hour Lunch, • Day shift, • Holidays, • Monday to Friday, • On call, • Overtime, • Weekend availability Ability to commute/relocate: • Driver's License (Required), • Journeyman Electrician (Preferred), • Journeyman Plumber (Preferred), • HVAC/EPA Certification (Strongly Preferred)

Job Description At Bonner Carrington, servant leadership is at the heart of how we conduct business and how we treat our team members. We pride ourselves on taking care of our properties, clients, residents, and employees. If this is aligned with who you are, apply now. Bonner Carrington Property Management is a forward thinking full-service property management company with the best leaders in the industry. The position: We’re looking for a Maintenance Technician to join the team. The Maintenance Technician is responsible to ensure that all vacated apartments are safely and thoroughly restored to "make ready" status according to the manager's timetable. Will also be required to perform work orders as assigned. Responsibilities • Complete assigned work orders, • Reports observations of liability or safety issues immediately to the Maintenance Supervisor, • Ensure all work orders are responded to within 24 - 48 hours, • Repair and improve all units prior to residents move in date, • Maintain pool and understand basic pool care (chemical readings, making chemical adjustments, and back-washing etc., • Basic carpentry skills, • Can safely operate the following equipment: power washer, backpack blower, floor scrubbers, carpet cleaner and sweepers, • Maintain grounds by removing debris and trash, • Reports supply needs to Maintenance Supervisor and or Property Manager and maintain shop organization, • Ability to be on call for after-hours emergencies Qualifications • Minimum of 1 year general maintenance or property experience, • Carpentry, plumbing, electrical and HVAC experience., • CPO or EPA Certification a plus, • Valid Driver's License and current auto insurance, • Required to furnish their own tools to perform daily routine tasks on the property, • Must also be able to transport or move up to 50 pounds at variable distances, • The mobility and flexibility to use ladders and to access and work in confined spaces or at heights in excess of nine feet, • Required to use general maintenance equipment including, but not limited to: hand tools, power tools, ladders, dollies, jacks, motors, pumps, compressors, blower equipment, vacuum pump, pool chemicals, and safety equipment, etc., • Requires work outdoors in temperatures exceeding 90 degrees or below 32 degrees Fahrenheit to perform necessary maintenance, • Must be able to drive personal or company motor vehicles without jeopardizing the safety of prospects, residents, fellow associates, and property guests, • Must wear company specified maintenance uniform apparel and safety equipment when required, • Must be able to read, write, speak and understand English Why should you apply? Reason 1- Top industry pay and benefits including 401 K and generous paid time off Reason 2- Advancement opportunities with a fast growing company Reason 3- Company Events and volunteer opportunities Reason 4- Work with a team of professionals Reason 5- A focus on training and industry education Employment with Bonner Carrington Property Management is contingent upon successful completion of a background check and drug screen. Bonner Carrington Property Management is an Equal Opportunity Employer. Associated topics: apartment, asset management, asset manager, regional manager, property, property operator, property preservation, property specialist, safety.

Job DescriptionCarpentry, electrical, HVAC, plumbing, and you! These are some of the most important things we need to maintain our properties and keep our residents happy. If you're looking to make a difference with your technical knowledge and excellent customer service, then we want to hear from you. WinnCompanies is looking for a Maintenance Technician II to join our team at Sunset Gardens, a 154 -unit LIHTC and PBS8 community located in Houston, TX. In this role, you will perform maintenance functions in the community, including rental units, residential common areas, office, grounds, and parking lots. The ideal candidate will have a highly diversified base of knowledge and skills needed to maintain the property to satisfy ownership and management objectives. The selected candidate will adhere to the following work schedule: Monday through Friday, from 8:00AM to 5:00PM, with an on-call rotation every 3 weeks. Please note that the pay range for this position is $23.70 to $25.00 per hour. Final salary will vary based on job responsibilities and scope, geographic location, candidate’s relevant experience, and other factors.Responsibilities • Diagnose and make repairs in such areas as, but not limited to: appliances, carpentry, hardware accessories, masonry, painting, basic electrical, basic plumbing, and basic HVAC., • Complete assigned service requests and repairs consistent with company operating procedures. Ensure vacant apartments are prepared for occupancy and market ready in accordance to company standards., • Perform maintenance service orders associated with the preventive maintenance program, building and safety inspection and annual unit inspection., • Maintain grounds and curb appeal through snow removal, landscaping, and trash management activities., • Be available for on call activity during off hours and emergencies based on a pre-determined schedule and need.Requirements, • 1-3 years of relevant work experience., • General knowledge of electrical, plumbing, appliances, HVAC., • Excellent customer service skills., • Good communication and interpersonal skills., • Basic familiarity with computers and tablets., • Availability for on-call activity during off-hours for urgent needs., • Ability to speak and understand basic English.Preferred Qualifications, • Vocational or technical training., • CAMT certification., • EPA or HVAC certification.

Job DescriptionNow Hiring: Part-Time 1099 Contractors – HVAC, Plumbing, Electrical, Handyman Maintenance Company: Superior Contracting & Maintenance Location: Local Technicians in AL, AZ, GA, FL, NC, OK, SC, TN, & TX Contact to Apply: Text (NO CALLS send your Name, Trade(s), Location) +1 (470) 460-6859 About the Opportunity Superior Contracting & Maintenance is seeking insured, part-time 1099 contractors to complete rotating residential maintenance work orders. This is not a job board—you won’t pay for leads or listings. We receive jobs from our home portfolio partners, support their completion with our local contractors, and pay you directly for completed work. We’re a residential maintenance service provider partnering with property portfolios. Our ideal contractor is someone who has their own business or clients but wants to fill in their schedule with high-frequency, low-friction work throughout the year. How It Works • You receive work orders directly from us—no lead chasing, no marketing., • Jobs come with “not-to-exceed” (NTE) limits (typically $150–$350) to complete minor residential repairs, ideally on the first trip., • Larger jobs require an estimate prior to work., • Mechanical trades (HVAC, electrical, plumbing, appliance repair) are paid diagnostic trip fees of $65–$85, depending on complexity and trade., • Once work is verified, we issue fast direct deposit payments., • SUPERIOR PURCHASES ALL MATERIALS! What We’re Looking For • Part-time, insured independent contractors (1099), • Contractors who want routine maintenance work, not full-time employment, • Tradespeople who are self-motivated, communicative, and ready to handle straightforward tasks across rotating properties Available Trades We’re hiring for a variety of residential services: • HVAC (EPA Cert Required), • Plumbing, • Electrical, • Appliance Repair, • Carpentry, Drywall, Painting, • General Handyman & Punchlist Services Requirements • Valid General Liability Insurance (COI required), • Worker’s Comp preferred but not required (Deduction can be made to offset coverage gap), • EPA Certification for HVAC techs (mandatory under new refrigerant regulations), • Must provide W9 and valid Tax ID, • Must complete brief onboarding/training call with vendor rep before receiving work, • Reliable vehicle (truck, van, SUV) + necessary tools, • Ability to navigate a mobile portal/app for job management - work is received and closed through online portal., • Strong professionalism, punctuality, and communication skills. Disqualifiers • No active insurance, • Missing EPA certification, • Unwilling to complete onboarding/training call, • Poor communication or failure to follow through on jobs Key Benefits: ✅ No Fees: This is direct, paid contract work—not a lead service. ✅ Flexible Schedule: Accept jobs that fit your availability. ✅ Local Work: All assignments are dispatched based on your coverage area. ✅ Fast Pay: Get paid after completion and quality check—no waiting weeks. To Apply Text your name, trade(s), and location to:

Job Description Job description Job description Lady Lanes Academy: Lady Lanes is a home organization, carpentry, and design company looking to expand for the second time. We are creating our second team of trainees to start June 1st. Every individual will be given $10/hr to start, and each individual will be trained in home organization and entrepreneurship. At Lady Lanes, we are an entrepreneurial based company always promoting growth within the company. We have had many employees with the company for 3+ years. We are a loyal group of hard working people looking to be around other hard working entrepreneurial minded indoviduals. We work 30-40 hours on different projects During the week. Every job is different. We work M-F. We start at 10:00am, and we end around 7:00pm or when the project is complete. If you have been nervous to jump both feet into starting your own company, Lady Lanes is a great place to start to see if you are interested in being an entrepreneur. We offer the protection of an hourly pay to cover some expenses while we train you and support you. Once you pass certain milestones we will increase your pay and discuss bringing you on as a permanent employee. Lady Lanes is a great company to have your first job at or if you are stuck in life and you aren’t sure your next steps. You will learn so much at Lady Lanes about small business, team work, budgets, organization, time lines etc. If you are a talented, hard working, positive individual looking for an exciting opportunity to showcase your skills and take a positive next step on your resume; we would love to hear from you. Apply now! • MUST have daily reliable transportation. We drive a lot, shop a lot, do returns, and pick ups. Job Types: Full-time, Contract Pay: $10.00 per hour Expected hours: 30 – 40 per week Schedule: • 8 hour shift Job Types: Full-time, Contract Pay: From $10.00 per hour Expected hours: 30 – 40 per week Schedule: • 8 hour shift, • Monday to Friday Work Location: In person