Trabajos Cleaning en Hillsboro, OregonCrear alertas

Amentum is seeking an Industrial Maintenance Mechanic IV- HVAC to join our operations & maintenance team. This Industrial Maintenance Mechanic IV is responsible for providing an advanced level of expertise in responding to work orders, troubleshooting, and providing preventive and corrective maintenance on the facility mechanical equipment and systems in an industrial manufacturing environment. Must possess the ability to make decisions and communicate well as a more senior technician. Must have the ability to diagnose and troubleshoot ventilation equipment, pumps, compactors, and fans in an industrial environment. Strong mechanical/electrical skills are required, including the ability to work safely around 3-phase power up to and including 480V. Must demonstrate good written and verbal communication. The Industrial Maintenance Mechanic IV must have the ability to identify and correct any safety-related issues and perform independent equipment evaluations to identify potential equipment failures. General Maintenance of equipment will also be required. Responsibilities: • Performs planned maintenance on all building equipment and related services for specific area while being sensitive and responsive to customer needs., • Performs trouble-shooting techniques on mechanical equipment such as pumps, air handlers, hydraulic systems, research laboratory vacuum systems, RO/DI purified water systems, compressed air and other gas equipment and distribution systems to determine problems and effect repairs as promptly and efficiently as possible to minimize downtime., • Performs preventative maintenance inspections., • Develops and implements planned maintenance procedures., • Performs basic pipefitting repairs., • Assists in installing, inspecting new equipment, and servicing installations., • Provides support to co-workers, contractors, vendors, project managers, building managers, and engineers as necessary to support project and renovation work., • Complies with all governmental, company, and industrial regulations, codes, and standards, health safety practices, and permit systems., • Conducts preventive maintenance inspections and performs required preventive maintenance actions such as lubrication, cleaning, filter changes, etc., • Performs preventive maintenance as scheduled in the Computerized Maintenance Management System (CMMS)., • Responds and provides service and feedback to the customer on all work orders while assuring compliance to codes, regulations, and industry standards., • Recommends measures to improve maintenance methods and equipment performance., • Analyzes and resolves work problems, or assists workers in solving work problems, • Understands company policies and enforces safety regulations., • Safely performs functions of the position including following proper safety guidelines such as job hazard analysis and lockout/tagout procedures and wearing PPE as required., • Operates various measuring, diagnostic and testing instruments to help provide energy efficiency solutions., • Operates a variety of equipment such as hand tools, laptop computers and diagnostic hardware to perform work., • Maintains a strict schedule in order to be successful in the assignment yet demonstrates flexibility in the day-to-day activities and scheduling for the benefit of the customer., • Other duties as assigned by Manager or Supervisor.\n Minimum Requirements: • Universal - EPA 608 Technician Certification., • Five years of experience performing mechanical maintenance in an industrial environment or demonstrated equivalent combination of education and experience.\n Additional Information: • Qualified applicants who are offered a position must pass a pre-employment substance abuse test., • This position may require a valid Driver's License., • This position does not include sponsorship for United States work authorization., • This position will require the ability to obtain a security access badge at our client's location., • This position may require various shifts, weekends, and alternative work schedules.\n Physical Requirements: • Some tasks will require repetitive wrist movement., • Some tasks will require the ability to walk extensively throughout facilities during a workday.\n, • Requires the ability to climb extension ladders, roof ladder, stepladders, and stairs as needed during a workday., • Requires the flexibility to bend/stoop, squat, kneel, reach/stretch, and move in a 90-degree fashion during workday., • Requires the ability to differentiate colors pertaining to wire color-coding., • Requires ability to read and understand information contained in a variety of documents or displayed on a computer screen., • Requires ability to use a variety of office equipment and to operate a computer keyboard to access data bases, to send/receive messages and to prepare documents., • Requires ability to attend meetings throughout the site and potentially travel to other Amentum, customer and/or vendor locations in the area, as well as some air travel to more distant locations., • Requires the ability to communicate with others on the telephone and in one-on-one or group discussions, meetings and presentations., • Demonstrated fluency in computer use including the full Microsoft product line., • Requires some moving of light to medium weight materials into desks, filing cabinets and other storage locations., • Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.\n Special Requirements: • Wear steel toe safety shoes, safety glasses, gloves, hard hats, and other Personal Protective Equipment as needed., • Cope with demands (stressors) that are associated with the job and/or the work environment so that acceptable levels of performance and overall contribution are maintained.\n Other Attributes: • Must be willing to work overtime when required., • May be required to work holidays and weekends.\n Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Amentum is seeking an Industrial Maintenance Mechanic IV- HVAC to join our operations & maintenance team. This Industrial Maintenance Mechanic IV is responsible for providing an advanced level of expertise in responding to work orders, troubleshooting, and providing preventive and corrective maintenance on the facility mechanical equipment and systems in an industrial manufacturing environment. Must possess the ability to make decisions and communicate well as a more senior technician. Must have the ability to diagnose and troubleshoot ventilation equipment, pumps, compactors, and fans in an industrial environment. Strong mechanical/electrical skills are required, including the ability to work safely around 3-phase power up to and including 480V. Must demonstrate good written and verbal communication. The Industrial Maintenance Mechanic IV must have the ability to identify and correct any safety-related issues and perform independent equipment evaluations to identify potential equipment failures. General Maintenance of equipment will also be required. Responsibilities: • Performs planned maintenance on all building equipment and related services for specific area while being sensitive and responsive to customer needs., • Performs trouble-shooting techniques on mechanical equipment such as pumps, air handlers, hydraulic systems, research laboratory vacuum systems, RO/DI purified water systems, compressed air and other gas equipment and distribution systems to determine problems and effect repairs as promptly and efficiently as possible to minimize downtime., • Performs preventative maintenance inspections., • Develops and implements planned maintenance procedures., • Performs basic pipefitting repairs., • Assists in installing, inspecting new equipment, and servicing installations., • Provides support to co-workers, contractors, vendors, project managers, building managers, and engineers as necessary to support project and renovation work., • Complies with all governmental, company, and industrial regulations, codes, and standards, health safety practices, and permit systems., • Conducts preventive maintenance inspections and performs required preventive maintenance actions such as lubrication, cleaning, filter changes, etc., • Performs preventive maintenance as scheduled in the Computerized Maintenance Management System (CMMS)., • Responds and provides service and feedback to the customer on all work orders while assuring compliance to codes, regulations, and industry standards., • Recommends measures to improve maintenance methods and equipment performance., • Analyzes and resolves work problems, or assists workers in solving work problems, • Understands company policies and enforces safety regulations., • Safely performs functions of the position including following proper safety guidelines such as job hazard analysis and lockout/tagout procedures and wearing PPE as required., • Operates various measuring, diagnostic and testing instruments to help provide energy efficiency solutions., • Operates a variety of equipment such as hand tools, laptop computers and diagnostic hardware to perform work., • Maintains a strict schedule in order to be successful in the assignment yet demonstrates flexibility in the day-to-day activities and scheduling for the benefit of the customer., • Other duties as assigned by Manager or Supervisor.\n Minimum Requirements: • Universal - EPA 608 Technician Certification., • Five years of experience performing mechanical maintenance in an industrial environment or demonstrated equivalent combination of education and experience.\n Additional Information: • Qualified applicants who are offered a position must pass a pre-employment substance abuse test., • This position may require a valid Driver's License., • This position does not include sponsorship for United States work authorization., • This position will require the ability to obtain a security access badge at our client's location., • This position may require various shifts, weekends, and alternative work schedules.\n Physical Requirements: • Some tasks will require repetitive wrist movement., • Some tasks will require the ability to walk extensively throughout facilities during a workday.\n, • Requires the ability to climb extension ladders, roof ladder, stepladders, and stairs as needed during a workday., • Requires the flexibility to bend/stoop, squat, kneel, reach/stretch, and move in a 90-degree fashion during workday., • Requires the ability to differentiate colors pertaining to wire color-coding., • Requires ability to read and understand information contained in a variety of documents or displayed on a computer screen., • Requires ability to use a variety of office equipment and to operate a computer keyboard to access data bases, to send/receive messages and to prepare documents., • Requires ability to attend meetings throughout the site and potentially travel to other Amentum, customer and/or vendor locations in the area, as well as some air travel to more distant locations., • Requires the ability to communicate with others on the telephone and in one-on-one or group discussions, meetings and presentations., • Demonstrated fluency in computer use including the full Microsoft product line., • Requires some moving of light to medium weight materials into desks, filing cabinets and other storage locations., • Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.\n Special Requirements: • Wear steel toe safety shoes, safety glasses, gloves, hard hats, and other Personal Protective Equipment as needed., • Cope with demands (stressors) that are associated with the job and/or the work environment so that acceptable levels of performance and overall contribution are maintained.\n Other Attributes: • Must be willing to work overtime when required., • May be required to work holidays and weekends.\n Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

It's exciting to work for a company that makes the world measurably better. We're committed to bringing safety, quality, and customer focus to the business of advanced ceramics manufacturing. Job Title Maintenance Mechanic I Responsible for repair, installation and general upkeep of manufacturing machinery and/or facility. Works within a team environment to meet departmental goals and objectives. Maintains work area cleanliness. Roles and Responsibilities: \n • Perform preventative maintenance such as changing coolants, lubricants or filters, following a set schedule\n, • Perform facility maintenance such as replacing lightbulbs, painting, replacing filters, painting, simple plumbing etc.\n, • Diagnose and repair, with or without schematic or manual, complex manufacturing or facility equipment; communicate and offer solution for maintenance challenges to appropriate person\n, • Perform internal and external facility equipment or building maintenance such as HVAC, painting, plumbing, welding etc.\n, • Inspect and perform basic maintenance and repair of manufacturing and facility equipment using manual and power tools\n, • Partner with senior mechanics to repair more complex manufacturing or facility equipment\n, • Wears required personal protective equipment at all times in areas where mandatory\n\n Job Requirements: Shift: • Monday - Friday: 7:00am - 3:30pm\n Education: • High School Diploma or equivalent preferred but not required\n Experience: • One (1) year relevant experience\n Functional/Technical Knowledge, Skills & Abilities: \n • Ability to understand and act on verbal and written instructions\n, • Basic math, computer and time-management skills\n, • Ability to self-direct work to complete project within defined time frame\n, • Knowledge of machine repair, plumbing, pipefitting, welding, sheet metal, mill-wright and/or general maintenance\n, • Must exhibit attention to detail as well as excellent listening, verbal and written communication skills\n, • Must be able to work with a diverse variety of people from different cultures and backgrounds\n\n Target Hiring Range Hourly: USD 23.92 - USD 28.95 Actual compensation is commensurate with experience, skills and education. CoorsTek strives to give all qualified applicants equal opportunity and to make selection decisions on job related factors. Do not provide any information on the application which will indicate your race, color, religion, national origin, sex, age, disability, sexual orientation, gender identity, pregnancy, genetic information, veteran status, or any other status protected by law or regulation. If you like working for a company that makes a real difference in the world, you'll enjoy your career with us!

Amentum is seeking an Industrial Maintenance Mechanic IV- HVAC to join our operations & maintenance team. This Industrial Maintenance Mechanic IV is responsible for providing an advanced level of expertise in responding to work orders, troubleshooting, and providing preventive and corrective maintenance on the facility mechanical equipment and systems in an industrial manufacturing environment. Must possess the ability to make decisions and communicate well as a more senior technician. Must have the ability to diagnose and troubleshoot ventilation equipment, pumps, compactors, and fans in an industrial environment. Strong mechanical/electrical skills are required, including the ability to work safely around 3-phase power up to and including 480V. Must demonstrate good written and verbal communication. The Industrial Maintenance Mechanic IV must have the ability to identify and correct any safety-related issues and perform independent equipment evaluations to identify potential equipment failures. General Maintenance of equipment will also be required. Responsibilities: • Performs planned maintenance on all building equipment and related services for specific area while being sensitive and responsive to customer needs., • Performs trouble-shooting techniques on mechanical equipment such as pumps, air handlers, hydraulic systems, research laboratory vacuum systems, RO/DI purified water systems, compressed air and other gas equipment and distribution systems to determine problems and effect repairs as promptly and efficiently as possible to minimize downtime., • Performs preventative maintenance inspections., • Develops and implements planned maintenance procedures., • Performs basic pipefitting repairs., • Assists in installing, inspecting new equipment, and servicing installations., • Provides support to co-workers, contractors, vendors, project managers, building managers, and engineers as necessary to support project and renovation work., • Complies with all governmental, company, and industrial regulations, codes, and standards, health safety practices, and permit systems., • Conducts preventive maintenance inspections and performs required preventive maintenance actions such as lubrication, cleaning, filter changes, etc., • Performs preventive maintenance as scheduled in the Computerized Maintenance Management System (CMMS)., • Responds and provides service and feedback to the customer on all work orders while assuring compliance to codes, regulations, and industry standards., • Recommends measures to improve maintenance methods and equipment performance., • Analyzes and resolves work problems, or assists workers in solving work problems, • Understands company policies and enforces safety regulations., • Safely performs functions of the position including following proper safety guidelines such as job hazard analysis and lockout/tagout procedures and wearing PPE as required., • Operates various measuring, diagnostic and testing instruments to help provide energy efficiency solutions., • Operates a variety of equipment such as hand tools, laptop computers and diagnostic hardware to perform work., • Maintains a strict schedule in order to be successful in the assignment yet demonstrates flexibility in the day-to-day activities and scheduling for the benefit of the customer., • Other duties as assigned by Manager or Supervisor.\n Minimum Requirements: • Universal - EPA 608 Technician Certification., • Five years of experience performing mechanical maintenance in an industrial environment or demonstrated equivalent combination of education and experience.\n Additional Information: • Qualified applicants who are offered a position must pass a pre-employment substance abuse test., • This position may require a valid Driver's License., • This position does not include sponsorship for United States work authorization., • This position will require the ability to obtain a security access badge at our client's location., • This position may require various shifts, weekends, and alternative work schedules.\n Physical Requirements: • Some tasks will require repetitive wrist movement., • Some tasks will require the ability to walk extensively throughout facilities during a workday.\n, • Requires the ability to climb extension ladders, roof ladder, stepladders, and stairs as needed during a workday., • Requires the flexibility to bend/stoop, squat, kneel, reach/stretch, and move in a 90-degree fashion during workday., • Requires the ability to differentiate colors pertaining to wire color-coding., • Requires ability to read and understand information contained in a variety of documents or displayed on a computer screen., • Requires ability to use a variety of office equipment and to operate a computer keyboard to access data bases, to send/receive messages and to prepare documents., • Requires ability to attend meetings throughout the site and potentially travel to other Amentum, customer and/or vendor locations in the area, as well as some air travel to more distant locations., • Requires the ability to communicate with others on the telephone and in one-on-one or group discussions, meetings and presentations., • Demonstrated fluency in computer use including the full Microsoft product line., • Requires some moving of light to medium weight materials into desks, filing cabinets and other storage locations., • Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.\n Special Requirements: • Wear steel toe safety shoes, safety glasses, gloves, hard hats, and other Personal Protective Equipment as needed., • Cope with demands (stressors) that are associated with the job and/or the work environment so that acceptable levels of performance and overall contribution are maintained.\n Other Attributes: • Must be willing to work overtime when required., • May be required to work holidays and weekends.\n Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

It's exciting to work for a company that makes the world measurably better. We're committed to bringing safety, quality, and customer focus to the business of advanced ceramics manufacturing. Job Title Maintenance Mechanic I Responsible for repair, installation and general upkeep of manufacturing machinery and/or facility. Works within a team environment to meet departmental goals and objectives. Maintains work area cleanliness. Roles and Responsibilities: \n • Perform preventative maintenance such as changing coolants, lubricants or filters, following a set schedule\n, • Perform facility maintenance such as replacing lightbulbs, painting, replacing filters, painting, simple plumbing etc.\n, • Diagnose and repair, with or without schematic or manual, complex manufacturing or facility equipment; communicate and offer solution for maintenance challenges to appropriate person\n, • Perform internal and external facility equipment or building maintenance such as HVAC, painting, plumbing, welding etc.\n, • Inspect and perform basic maintenance and repair of manufacturing and facility equipment using manual and power tools\n, • Partner with senior mechanics to repair more complex manufacturing or facility equipment\n, • Wears required personal protective equipment at all times in areas where mandatory\n\n Job Requirements: Shift: • Monday - Friday: 7:00am - 3:30pm\n Education: • High School Diploma or equivalent preferred but not required\n Experience: • One (1) year relevant experience\n Functional/Technical Knowledge, Skills & Abilities: \n • Ability to understand and act on verbal and written instructions\n, • Basic math, computer and time-management skills\n, • Ability to self-direct work to complete project within defined time frame\n, • Knowledge of machine repair, plumbing, pipefitting, welding, sheet metal, mill-wright and/or general maintenance\n, • Must exhibit attention to detail as well as excellent listening, verbal and written communication skills\n, • Must be able to work with a diverse variety of people from different cultures and backgrounds\n\n Target Hiring Range Hourly: USD 23.92 - USD 28.95 Actual compensation is commensurate with experience, skills and education. CoorsTek strives to give all qualified applicants equal opportunity and to make selection decisions on job related factors. Do not provide any information on the application which will indicate your race, color, religion, national origin, sex, age, disability, sexual orientation, gender identity, pregnancy, genetic information, veteran status, or any other status protected by law or regulation. If you like working for a company that makes a real difference in the world, you'll enjoy your career with us!

It's exciting to work for a company that makes the world measurably better. We're committed to bringing safety, quality, and customer focus to the business of advanced ceramics manufacturing. Job Title Maintenance Mechanic I Responsible for repair, installation and general upkeep of manufacturing machinery and/or facility. Works within a team environment to meet departmental goals and objectives. Maintains work area cleanliness. Roles and Responsibilities: \n • Perform preventative maintenance such as changing coolants, lubricants or filters, following a set schedule\n, • Perform facility maintenance such as replacing lightbulbs, painting, replacing filters, painting, simple plumbing etc.\n, • Diagnose and repair, with or without schematic or manual, complex manufacturing or facility equipment; communicate and offer solution for maintenance challenges to appropriate person\n, • Perform internal and external facility equipment or building maintenance such as HVAC, painting, plumbing, welding etc.\n, • Inspect and perform basic maintenance and repair of manufacturing and facility equipment using manual and power tools\n, • Partner with senior mechanics to repair more complex manufacturing or facility equipment\n, • Wears required personal protective equipment at all times in areas where mandatory\n\n Job Requirements: Shift: • Monday - Friday: 7:00am - 3:30pm\n Education: • High School Diploma or equivalent preferred but not required\n Experience: • One (1) year relevant experience\n Functional/Technical Knowledge, Skills & Abilities: \n • Ability to understand and act on verbal and written instructions\n, • Basic math, computer and time-management skills\n, • Ability to self-direct work to complete project within defined time frame\n, • Knowledge of machine repair, plumbing, pipefitting, welding, sheet metal, mill-wright and/or general maintenance\n, • Must exhibit attention to detail as well as excellent listening, verbal and written communication skills\n, • Must be able to work with a diverse variety of people from different cultures and backgrounds\n\n Target Hiring Range Hourly: USD 23.92 - USD 28.95 Actual compensation is commensurate with experience, skills and education. CoorsTek strives to give all qualified applicants equal opportunity and to make selection decisions on job related factors. Do not provide any information on the application which will indicate your race, color, religion, national origin, sex, age, disability, sexual orientation, gender identity, pregnancy, genetic information, veteran status, or any other status protected by law or regulation. If you like working for a company that makes a real difference in the world, you'll enjoy your career with us!

Responsibilities: Maintain and repair warehouse fixtures, equipment, and facilities to ensure safe operations.

ABM Industries - - Responsibilities: Perform routine cleaning tasks including sweeping, mopping, vacuuming, dusting, and polishing floors and surfaces; Clean and sanitize restrooms, replenish supplies, and ensure hygiene standards are met; Empty trash and recycling bins and waste in accordance with

Merrill Gardens - - Responsibilities: Thoroughly cleaning and providing daily upkeep of resident apartments and common areas; Providing a high level of customer service to all residents and guests; Reports needed supplies to appropriate designee and coordinating housekeeping services with other dep

Job Description Market of Choice Reed's Crossing Hillsboro is now hiring for Maintenance Clerks. This position starts at $17.50/hour - $20.00/hour depending on experience, with growth opportunity up to $20.50/hour! Market of Choice is a growing, local company with excellent benefits and opportunity for growth. Our company offers a benefits package that includes health, dental, and vision insurance, competitive wages, and a matching 401(k) retirement plan. DUTIES Market of Choice employees create a pleasant in-store atmosphere and provide knowledgeable and friendly customer service. As a Maintenance Clerk, you will maintain the physical building (internally and externally) and it's grounds. Some of your duties will also include: • Perform routine checks for cleanliness and janitorial servicing, • Assist moving heavy items like furniture, storage boxes, files, etc, • Performing mechanical, plumbing and other repairs as directed, • Event set-up, • Maintaining building-wide recycling program, • Refill empty soap and towel holders, clean windows, and performs other cleaning tasks, • Maintain supply and equipment inventory, • Creating and maintaining store records, • Knowledge of tools used in maintenance work, • General cleaning of floors, tables and countertops, mirrors and signs, shelving, and process areas. Get ready for a high-energy, team-oriented environment! Preference will be given to applicants with prior maintenance experience and open availability. You must be 18 years or older. COMMITMENT TO DIVERSITY A diverse community and workplace benefits us all. Market of Choice is committed to recruiting, hiring and promoting qualified applicants as well as giving people of all backgrounds an opportunity to work and contribute to our company and community. We uphold our tradition of valuing our employees by providing equal opportunities to all applicants.

Research Internships at Microsoft provide a dynamic environment for research careers with a network of world-class research labs led by globally-recognized scientists and engineers, who pursue innovation in a range of scientific and technical disciplines to help solve complex challenges in diverse f

Research Interns are expected to be physically located in their manager's Microsoft worksite location for the duration of their internship. Benefits/perks listed below may vary depending on the nature of your employment with Microsoft and the country where you work. Microsoft is an equal opportunity

Production Operator II - Parts Cleaner.

Flexible hours (you set your own schedule) - Homeaglow is hiring professional house cleaners.

Job Description Market of Choice Reed's Crossing is now hiring for Graveyard Floor Maintenance Clerks. This position starts at $17.50/hour - $20.00/hour depending on experience, with growth opportunity up to $20.50/hour! Market of Choice is a growing, local company with excellent benefits and opportunity for growth. Our company offers a benefits package that includes health, dental, and vision insurance, competitive wages, and a matching 401(k) retirement plan. QUALIFICATIONS You must be 18 years or older. DUTIES We are looking for a friendly team-player to join our Graveyard Floor Maintenance crew. Your duties will include, but are not limited to: • Mopping, • Stripping, • Waxing all floor types, • Pressure washing, • Completing assigned clean-up duties. This position is scheduled for graveyard shift. Preference will be given to applicants with previous experience and open availability, including working weekends. COMMITMENT TO DIVERSITY A diverse community and workplace benefits us all. Market of Choice is committed to recruiting, hiring and promoting qualified applicants as well as giving people of all backgrounds an opportunity to work and contribute to our company and community. We uphold our tradition of valuing our employees by providing equal opportunities to all applicants.

Hilton Cleaner (Room Attendant) Job Description. A Hilton Cleaner (Room Attendant) is responsible for maintaining clean, comfortable, and welcoming guest rooms and public areas.

Job DescriptionMaintenance Supervisor - The Reserve at Fernhill - Forest Grove, OR Who we are: CloudTen is a residential brand headquartered in Nevada that manages and operates multifamily properties throughout the West. Our diverse portfolio of properties, ranging from hotel-to-residential conversions to high-rise lease-ups, to repositioning value add properties, offers renters the options for services and amenities they desire. Long story short – our sweet spot is all things multi-family. With uncompromising integrity, a passion for providing stellar service, and a commitment to innovation, CloudTen flies high above the status quo. CloudTen’s dedicated team trailblazes new paths to nurture growth and success, building relationships from the inside out. At our core we are People People, thoughtfully trained to support clients, fellow team members and residents alike – always learning forward to create a positive living experience. About this role: The Maintenance Supervisor supervises and coordinates activities of all phases of the physical maintenance of an income producing multi-family property. This includes but is not limited to; the general maintenance of the property, daily cleaning of all common areas, completing all interior paints upon turnover of units, supervision of maintenance staff members (when applicable), prioritizing and assigning work schedules, expense control, and adherence to preventive maintenance programs and required state and federal safety programs.What you'll do: Includes but not limited to: • Directs in all aspects of property maintenance, including preventative, corrective, deferred, and emergency maintenance., • Prepares or assists in preparing all market-ready apartments in regard to painting, carpet cleaning, general repairs, housekeeping, etc. within 3 to 5 days after they have been vacated., • Performs various preventative maintenance functions and records findings in maintenance log., • Maintain accurate inventory control of tools, equipment and supplies. Team members are required to use all personal protective equipment as assigned and instructed, specifically back belts, goggles, dust mask, hard hats and gloves., • Team members are required to carry back belts, goggles and gloves in their possession at all times during work hours. Dust masks and hard hats must be readily available., • Assists in performing apartment move-in and move-out inspections as directed by Site Management., • Ensures that maintenance requests are handled as quickly, efficiently and effectively as possible and are completed within 24 hours. If parts must be ordered, causing a delay, incumbent notifies Site Management and informs residents., • Adheres to company monthly preventive maintenance directives, with regard to but not limited to; lighting, fire safety, pool/spa, life/safety hazards, and signage check., • Have knowledge of location of gas, electric, irrigation, and water shutoffs, all apartment and fixture shutoffs, and sewer cleanouts and post map of same and ensure all employees are familiar with posted map., • Controls expenses and purchases and secure approval from Community Manager for all expenditures., • Ensures that residents are provided with a clean, safe, well-maintained community by completing regular community inspections., • Responds to resident services requests and concerns in a timely manner., • Performs on-call emergency service as required., • Assists the Maintenance Director and/or Property Manager on special maintenance projects as necessary., • Performs appliance, electrical, HVAC, plumbing, pool, custodial, and carpentry work as necessary., • Ensures exterior curb appeal of community; cleanliness of grounds, laundry room, daily pool/spa maintenance, recreation room, rental office, restrooms, and common areas., • Performs requisite pool/spa maintenance. Ensures good appearance and healthy, cost-effective operation of pool/spa., • Works along with general maintenance staff in maintaining grounds and common areas and keeping them free of trash and debris., • Monitors the maintenance and up-keep of all mechanical equipment on the community including, but not limited to, water heaters, HVAC units, etc., • Adheres to CloudTen's Injury and Illness Prevention Policy and Asbestos and Hazardous Materials Policy. Maintain records and Material Safety Data sheets on all hazardous materials chemicals utilized on site and are sure that employees are familiar with the precautions on the sheets before using them., • As team leader, responsible for training and supervision of community maintenance staff. Is typically involved with Property Manager in hiring, interviews, training, and performance reviews of maintenance staff., • Confers with Site Management to coordinate activities of management and maintenance departments., • Recommends measures to improve methods of operations, performance, safety and quality of service., • Suggests changes in working conditions and use of equipment to increase efficiency of shop, department, or work crew., • Ensures safe work practices are being followed by all maintenance staff., • Responsible for holding monthly safety meetings with team., • Ensures that maintenance staff is performing to Company standards and that service requests are handled in a prompt, courteous and efficient manner., • Understands and complies with Fair Housing laws and standards., • Maintains open communication with Property Manager and other community staff., • Ensures regular and timely communication to Site Management noting any maintenance problems or life/safety deficiencies., • Negotiates to maximize the benefits of the organization., • Reports or offers recommendations for community capital improvements or repairs, the development of job specifications, bid acquisitions, contract developments and negotiations, etc., • Responsible for ensuring the timely and accurate submission of time sheets for his/her team.What you'll need:, • 1+ years of Property Maintenance Experience is preferred., • Prior Supervisory experience is required.Other Requirements:, • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel; and talk or hear. The employee frequently is required to walk. The employee is occasionally required to stand; reach with hands and arms; and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 100 pounds when moving a large appliance such as a stove or refrigerator in order to clean around and under it. Ability to push and roll large trash dumpsters in order to clean dumpster area. May be asked to assist with moving large appliances. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus., • While performing the duties of this job, the employee regularly works in outside weather conditions. The employee frequently must climb, step on standard ladders while fixing external light fixtures and other high areas. The employee is occasionally exposed to fumes or airborne particles. The employee must occasionally wear a protective mask, gloves and goggles while cleaning. Who you are:, • Focused with high attention to detail, • Curious and proactive, • Growth-oriented and well-organized, • Disciplined and self sufficient, • A strong communicator, • Tech savvyWhat is in it for you:, • Medical, Dental, and Vision Insurance, • Life Insurance, • Paid Time-Off/Holidays, • 401(k) Retirement Plan

Job Description Job Description: We are seeking a dedicated and experienced FAA Airframe & Powerplant (A&P) mechanic to be an Instructor for our new A&P maintenance school at Hillsboro Aero Academy (HAA). The successful candidate will be responsible for providing high-quality instruction to students pursuing their A&P certification. This role requires a deep understanding of aviation maintenance, a passion for teaching, and strong leadership skills. This position will also assist in overseeing the school’s FAA Part 147 maintenance school certification, as well as developing and maintaining curriculum and training equipment. This position is part of our expanding aviation maintenance training program, offering the opportunity to grow with us as we continue to develop and broaden our operations. Job Duties: • Deliver engaging and informative lectures, practical demonstrations, and hands-on training sessions., • Evaluate student performance through assessments, practical exams, and continuous feedback., • Maintain accurate records of student progress and certification requirements., • Manage daily operations of the A&P school, including scheduling, resource allocation, and equipment maintenance., • Ensure compliance with all regulatory requirements and industry standards., • Mentor and support students throughout their educational journey, fostering a positive learning environment., • Assist the admissions and marketing staff as necessary in the recruitment and selection of new students., • Stay updated with the latest developments in aviation maintenance technology and educational best practices., • Provide advice to the administration on matters pertaining to the instructional program., • Assist in the management of the school’s FAA Part 147 maintenance school certificate., • Assist in developing, maintaining and updating the school curriculum., • Minimum of 3 years of recent experience in aviation maintenance., • Strong understanding of FAA regulations and compliance requirements., • Excellent communication and interpersonal skills., • Proven leadership abilities., • Associate or Bachelor’s degree in Aviation Maintenance, Education, or a related field., • 2 years of instructional experience in a classroom or job setting., • Experience in curriculum development and instructional design., • Previous experience instructing in an educational institution or technical training program., • affordable health care benefits, • company 401(k) with match, • PTO (20 days in first 2 years, 25 days after 2 years, 30 days after 5 years), • company-paid life insurance and AD&D, • 2-week Sabbatical after 5 years, • discounted flight training

Job Description Hiring for our well established, women owned cleaning company! Sign on bonus if hired! Duties would include, but not limited to, things such as sweeping, mopping, vacuuming, and sanitizing all surfaces. A very detail-oriented person is a must! You will need a cell phone, valid driver’s license and reliable transportation (with up to date insurance). 20 hours to start with the opportunity to increase. Typical business hours are Monday through Friday, 7:30AM-4PM. Pay scale will range between $17-21 an hour based on experience and will be reevaluated after 30 days. Sign-on bonus will be paid after 30 days of employment. All cleaning supplies will be provided. Requirements: -Must have a valid drivers license and reliable transportation. (including insurance) -Must be able to climb a ladder and stairs. -Must be able to lift at least 25 lbs. -Must speak English. -Previous cleaning experience recommended. Thank you! Job Types: Full-time, Part-time Salary: $17.00 - $21.00 per hour Company DescriptionWe are a small, woman owned company that has been in business for 25+ years! We are well established with many prominent builders in the Portland metro area.We are a small, woman owned company that has been in business for 25+ years! We are well established with many prominent builders in the Portland metro area.

Job Description AGC Electronics America (AGCEA) manufactures high-purity Silicon Carbide (SiC) Ceramics materials and CMP Slurries for the semiconductor industry. We also serve as a distributor for other AGC Electronics Materials manufactured in Japan and elsewhere. We are headquartered in Hillsboro, Oregon, USA, and are a division of AGC Flat Glass North America. We are seeking to add an experienced, licensed LME, out tight knit, highly skilled maintenance team. Job Summary Performs maintenance and repair of the facility’s structure, equipment and grounds. Work may include supporting plumbing, electrical, and HVAC systems. Performs routine preventative maintenance and corrective maintenance according to specification on assigned machinery and systems. Conducts daily rounds to monitor facility equipment, record sensor data, and determine necessary repair work. Works from blueprints, drawings, and written procedures. Performs duties of general contractor on projects, which includes full cycle project coordination. Key Responsibilities • Performs maintenance and repair of the facility’s structure, equipment and grounds., • Work may include supporting plumbing, electrical, HVAC, and fabrication projects., • Repair, replace, and maintain electrical equipment operating at less than 600 volts., • Performs routine preventative maintenance and corrective maintenance according to specification on assigned machinery and systems., • Conducts daily rounds to monitor facility equipment, record sensor data, and determine necessary repair work., • Works from blueprints, drawings, and written procedures., • Limited Maintenance Electrician (LME) License, • High School Diploma or GED Equivalent, • 10+ years of related experience, • Coursework in journey-level mechanical trades, • HVAC preventative maintenance experience AGC Electronics America (AGCEA) values your contributions to our company’s success. As part of our Total Rewards philosophy, we offer a competitive benefits package that includes: • 3 weeks PTO plus paid sick time, • 10 paid holidays per year., • Medical, Dental and Vision insurance., • Tuition reimbursement program., • Employee engagement events and a recognition program. AGC Electronics America does not offer H1-B (or similar) sponsorship. We are proud to be an Equal Opportunity and Affirmative Action employer, and consider qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status, or any other protected factor under federal, state, or local law.

Job Description Job Description We are seeking a detail-oriented and experienced FAA Airframe & Powerplant (A&P) professional to support curriculum development for our Aviation Maintenance Technician School (AMTS) at Hillsboro Aero Academy (HAA). This is a short-term/temporary position (estimated 2 months) focused on developing high-quality instructional content to support our FAA Part 147 approved program. The successful candidate will work closely with the Program Manager and instructional team to create structured course materials, including PowerPoint presentations, lesson content, instructional resources, and supporting documentation aligned with FAA regulations and program learning objectives. This role requires strong technical knowledge, organizational skills, and the ability to translate aviation maintenance expertise into clear, engaging instructional content. This position supports our expanding aviation maintenance training program and plays a key role in strengthening the academic foundation of our curriculum. Position Type • Remote, • Short-term (2 months), • Develop structured instructional materials for General, Airframe, and Powerplant courses in alignment with FAA Part 147 requirements., • Create professional, comprehensive PowerPoint presentations to support classroom and lab instruction., • Draft lesson plans, instructional outlines, and supporting teaching materials., • Ensure all curriculum materials align with FAA regulations, required competencies, and program learning objectives., • Collaborate with instructors to ensure technical accuracy and instructional consistency., • Update and refine existing course materials to improve clarity, organization, and educational effectiveness., • Assist in organizing curriculum content to ensure logical sequencing and alignment with required contact hours., • Incorporate best practices in adult learning and technical education., • Provide recommendations for instructional tools, visual aids, and supplemental learning resources., • Meet agreed-upon project milestones and deliverables within established timelines., • Strong understanding of FAA regulations and Part 147 compliance requirements., • Experience creating technical documentation, presentations, or training materials., • Excellent written communication skills with the ability to translate technical information into clear instructional content., • Strong organizational skills and attention to detail., • Proficiency in Microsoft Office Suite (especially PowerPoint and Word)., • Previous instructional or teaching experience in a Part 147 school or technical training program., • Experience in curriculum development or instructional design., • Associate or Bachelor’s degree in Aviation Maintenance, Education, or related field., • Familiarity with learning management systems (LMS) and modern educational technologies., • Experience developing content aligned to competency-based education models. Hillsboro Aero Academy is an Equal Opportunity Employer

Job Description Whether you're a recent grad or a seasoned professional, you can experience meaningful career growth at Rosendin. Enjoy a true sense of ownership as you work with a proven industry leader on some of the most exciting and high-profile projects in the nation. We offer a wide range of job opportunities, competitive compensation, full benefits, an Employee Stock Ownership Plan and more. Why Rosendin? Committed. Innovative. Engaged. Come build your experience with us! Rosendin's Summer Internship Program is a hands-on training program designed to give you a well-rounded experience. You will work alongside passionate mentors solving real-world construction industry challenges in Construction Project Management, Engineering, Procurement, Estimating, Safety and Corporate roles. Our Summer Internship program is a 10-to-12-week paid opportunity. Your internship, at Rosendin, can be the perfect opportunity to expand your knowledge outside of the classroom and apply the concepts and theories of your major field of study. The hands-on real-world experiences that you encounter during our internship program enable you to develop your potential and make key contacts for future networking. Use your internship to determine your interest level in certain career fields, get feedback from professionals regarding your strengths and weaknesses, and to further your education and expand your resume. In mid-June, we invite all our Interns across the country, to spend a week at Rosendin's Internship Week. Subject matter includes Construction Project Management, Estimating, Engineering, Safety, and more. We will visit live job sites and have team building events to make this a very valuable part of your overall internship experience. Things we love to see in our Interns: * A strong work ethic * Holds oneself accountable * Honest * Driven and takes initiative to get the job done * Customer focused * Possesses a team spirit and enjoys collaborating * Detail oriented and organized * Strong communication skills About You: You're pursuing a degree that aligns with Rosendin's needs: * Construction Management * Engineering (Architectural Engineering, Electrical, Civil and Construction) * Renewable Energy * Occupational Health & Safety * Procurement * Finance, Marketing, Accounting or any other related college or work-related experience Internship Benefits: * On-the-job experience and training in your specific role * Opportunity to work with some of the brightest and most talented people in the industry * Paid internship * Potential full-time employment opportunities in any of our locations * A company that supports Diversity, Equity, and Inclusion. * Internship Locations: San Jose-CA, Anaheim-CA, Sacramento-CA, Tempe/Phoenix, AZ, Las Vegas-NV, Portland-OR, Austin-TX, Dallas-TX, Temple-TX Sterling-VA, Hanover-MD, Charlotte-NC, Nashville-TN, Boise-ID, Aiea-HI and many more Rosendin is one of the largest electrical contractors in the United States employing over 7,000 people. We are EMPLOYEE OWNED (ESOP) and have a wonderful reputation for building quality electrical and communications installations, building value for clients, and building people's careers within the company. Rosendin is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Our success is rooted in our people. We all come together around long-term vision and a sense of shared ownership. As a group, we do whatever it takes to ensure the success of our business and your career. Rosendin Electric is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Fish Window Cleaning has grown to be the world's largest window cleaning company with more than 250 franchise territories in 43 states, yet we still maintain the traditional values we were founded on. Since its inception over three decades ago, Fish Window Cleaning has been dedicated to being a cons

Demonstrate skill and proficiency in content cleaning techniques. It is challenging to make customers happy when faced with a traumatic event, but you will love being a Cleaning Specialist if you take pride in your work and have fun while working with others. What Does a Cleaning Specialist with Pau

Responsibilities include the operation of the scrubber and buffer, dust mopping, damp mopping, sweeping, vacuuming, dusting, and spot cleaning glass and windows. Physical stamina to perform cleaning tasks and run floor buffer and scrubber.

Fish Window Cleaning has grown to be the world's largest window cleaning company with more than 250 franchise territories in 43 states, yet we still maintain the traditional values we were founded on. Are you looking for a unique and rewarding career opportunity? Join our team at Fish Window Cleanin