Engineering jobs in Hillsboro, OregonCreate job alerts

Job Description Overview Opportunity: Engineer Perform preventative and repair maintenance work to ensure the hotel is maintained according to established quality and sustainability standards while treating guests in a warm and friendly manner. Your Growth Path Chief Engineer – Engineering Supervisor – Chief Engineer – Area Chief Engineer Your Focus • Conduct room inspections and identify repair needs., • Install or repair sheetrock and other wall coverings., • Paint designated areas and items., • Install and replace basic electrical fixtures, replace light switches, receptacles, light bulbs and fixtures., • Repair furniture., • Install, replace and program televisions., • Perform minor plumbing functions., • Replace and repair heating and cooling pumps as well as preventative maintenance on units., • Trace and repair all types of water lines., • Troubleshoot and repair kitchen equipment., • Maintain repair and preventive maintenance records., • Perform and maintain work to local, state and Federal codes., • Be aware of guest satisfaction scores and work toward increasing departmental and overall guest satisfaction., • Work as a bell attendant in the event of staffing shortages or during peak check in/out periods., • Follow Service Recovery Guidelines., • Follow sustainability guidelines and practices related to HHM’s EarthView program., • Practice safe work habits, wear protective safety equipment and comply with MSDS and OSHA standards., • Ensure overall guest satisfaction., • Perform other duties as requested by management. Your Background and Skills • Previous engineer/maintenance experience or equivalent training required. Work Context • Work schedule varies and may include working on holidays and weekends and alternate shifts., • Requires standing for extended periods, walking, pushing, lifting up to 50 pounds, bending and reaching, kneeling, stooping, crawling and climbing. What We Believe People Are Our Capability – Hearts That Serve – Only Excellence – Stay Nimble – Own It

Job DescriptionWGNSTAR is a dynamic and growing company with a global footprint. Primarily focused on the semiconductor industry, we provide a platform for you to expand your career with knowledge gained on the job training, and tailored development. We know we need talented people like you that hold similar values, which is why we do not put limits on learning, development, industry, and personal growth. Start your path to a WGNSTAR career today! Schedule: Compressed Night shift Pay Rate: $28-$35/hr Location: Hillsboro, OR Position Type: Full-time Benefits: This position is eligible for WGNSTAR’s full benefits package, including Medical, Dental, Vision, and 401(k). Additional benefits are listed at the end of this posting. Principal Duties and Responsibilities: • Working from engineering drawings, schematics and technical manuals, performs hands on field service duties at customer sites, i.e. on-site installations of systems, upgrades and retrofits; diagnosis, preventative maintenance and repairs of complex electronic and mechanical systems; debugging; etc., • Working from final process results on customer product, can provide basic-to-advanced equipment troubleshooting; identification of equipment or process problems, as well as provide operational, maintenance and proper use training to customers and fellow employees on equipment., • May recommend to customer, fellow employees and factory personnel, equipment modifications or improvements to methods and/or maintenance schedules to enhance the operation and performance of the equipment., • In a timely manner, submits all necessary documentation, i.e. timesheets; expense reports; weekly update field service reports; etc. as dictated via company policies, procedures and practices. Adheres strictly to guidelines and instructions issued by management., • Maintains technical proficiency and troubleshooting skills in order to be thoroughly knowledgeable in and capable of correcting problems concerned with the electronic, electrical, pneumatic, mechanical assembly, drive mechanism, and software systems for all equipment. As required, may be instructed to take continuing education courses, seminars and in-house/OJT., • Takes an active role in information training of less-experienced field service engineers., • Act as key link to customer satisfaction by handling a wide variety of customer service problems, i.e. orders or complaints for installation, failures, investigations in service, solicitation of additional service, etc. in a manner which will enhance service and equipment reputation, as well as develop and maintain a high level of customer satisfaction and improved customer relations., • Associate or Bachelor’s degree in: Electrical Engineering Mechanical Engineering Mechatronics Semiconductor Manufacturing Technology Or equivalent military/industry experience, • Work closely with customer site technicians and engineering team to maintain systems., • Work front end night shift to perform Preventative and Corrective Maintenance to include hard down support., • Perform weekly, monthly, semi-annual, annual PM's. Interface with site customer engineering and technician teams to provide top level shift support to keep the up time of platforms up to highest reliability for customer site., • Must be qualified to work in a clean room or fab environment, and have at least 3 years experiencePreferences: The people who thrive most at WGNSTAR are those individuals who perform well in a team environment, enjoy interacting and engaging with several different stakeholders, and adapt quickly to changing environments, while leveraging their skills, quality, and knowledge to drive themselves and their teams towards continuous improvement and success. This job description is intended to convey information essential to understanding the scope of the job and the general nature and level of work performed by job holders within this job. This job description is not intended to be an exhaustive list of qualifications, skills, efforts, duties, responsibilities or working conditions associated with the position. This position is not eligible for visa sponsorship. All applicants must be legally authorized to work in the United States without the need for current or future sponsorship (e.g., H-1B, O-1, etc). Additionally, WGNSTAR does not participate in the STEM OPT extension program for this role. Equal opportunities and Social Governance WGNSTAR is an Equal Opportunity Employer, drug free workplace, and complies with ADA regulations as applicable. WGNSTAR places an immense emphasis on equal employment, encourages diversity in the workplace, and applies an open-door policy for inclusion of all employees. Our diversity program encourages people from any gender, background, ethnicity, culture, education, and experience to join the company and more importantly build a career through employee development. Through our Global wellness programs, WGNSTAR ensures our employees and families have access to a full range of wellness services through our Employee Assistance Program (EAP). In the communities that surround our business operations, we support individual and group sponsorships for local sports and those that are vulnerable in society. Powered by JazzHR LFnIMgSyVe

Field Service Engineer II – Onsite. Trains other Field Service Engineers on specific product lines. Trains other Field Service Engineers on specific product lines and company software (timecards, expense reporting, drawings, parts).

Job Description POSITION SUMMARY Jireh Semiconductor in Hillsboro, OR is looking for an experienced Equipment Engineers to join their Thin Films Maintenance team! The Equipment Engineer will be responsible for new equipment installation planning, install, startup, PM program and procedures, spare parts requirements, technician training programs, and overall equipment uptime performance. RESPONSIBILITIES/DUTIES • Perform routine preventative maintenance as needed to ensure equipment performance., • Develop and maintain equipment specs., • Develop and execute corrective maintenance plans for equipment., • Work closely with counterparts in the equipment, production, and process groups to ensure that work is scheduled and prioritized to best support production while ensuring the quality of our product., • Develop, implement and maintain training programs for technician certification on area equipment, • Develop, implement equipment improvement plans., • Participate in the selection / interview process for technician hiring, transfers, and cross-training., • Oversee equipment relocation and installations. Regularly required to sit or stand and move about the facility including servicing equipment in the clean room. Exposure to shop elements such as noise, dust, fumes and odors. Ability to lift objects of 50 lbs. Ability to obtain respirator certification for use in the facility. EXPERIENCE/EDUCATION 5+ years of maintenance experience on Thin Films or relevant semiconductor equipment preferred. Bachelor's degree in a related engineering discipline 2 year degree or equivalent military or technical training may be considered with significant experience. QUALIFICATIONS/OTHER REQUIREMENTS Strong technical capability Ability to troubleshoot system problems to board level required, component level preferred. Ability to analyze equipment schematics for advanced troubleshooting of complex problems. Experience on the following toolsets: AMAT Centura BPSG, AMAT Ultima HDP, AMAT Tungsten Plug, AMAT Endura, Novellus Concept 2 Sequel, AG 8100 and 8108 RTPs, Tencor RS and stress Metrology tools Familiarity with SPC, FMEA, and standard engineering practices Strong communication and team work skills Ability and desire to learn and support additional toolsets *Pay range listed in this job posting is an estimate only, and is not necessarily reflective of actual compensation that may be earned, nor a promise of pay for any specific employee future or past. Offers made are always dependent upon actual experience, education and other factors. Depending upon experience, candidates may receive an offer for a position level lower or higher than that listed, i.e. application to a Staff level position does not guarantee an offer of Staff title. About Jireh Semiconductor: COMPANY INFORMATION: Alpha and Omega Semiconductor (AOS) is committed to excellence in design, manufacturing, and responsiveness to our customers through the continued development of new technologies, products and innovative solutions. We bring to the market devices designed to benefit our customers by meeting their product specific needs. Our mission is to bring value to our customers, shareholders and employees. AOS differentiates itself by integrating its Discrete and IC semiconductor process technology, product design, and advanced packaging know-how to develop high performance power management solutions. AOS's portfolio of products targets high-volume applications, including but not limited to portable computers, flat panel TVs, LED lighting, smart phones, battery packs, consumer and industrial motor controls and power supplies for TVs, computers, servers and telecommunications equipment. EEO Statement: Jireh Semiconductor prohibits discrimination based on race, color, religion, gender, national origin, age, disability, veteran status, marital status, pregnancy, gender expression or identity, sexual orientation or any other legally protected status. Jireh Semiconductor, Inc., a wholly owned subsidiary of Alpha and Omega Semiconductor Ltd., is the in-house wafer fab for AOS and is located in Hillsboro, Oregon. Job Posted by ApplicantPro

Job Description Join UCT and be part of the fastest-growing sector in the world! We indirectly touch every semiconductor chip that goes into every smartphone, smart car, and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every talented employee is committed to continuous innovation, challenging the status quo and exceeding customer expectations. If you are a person with a relentless drive to succeed, a strong focus on quality with a passion for success – join us today! UCT is looking for a talented Engineer III to join us in Hillsboro, OR! The Technical Marketing Engineer for Data Center Cooling and Infrastructure serves as the bridge between engineering, business development, and customer technical teams. This role is responsible for defining standardized TRW/TCW skid platforms and supporting customer engagements related to liquid cooling infrastructure used in hyperscale and colocation data centers. The position focuses on translating engineering capabilities into customer-ready product platforms, technical documentation, and proposal support. The Technical Marketing Engineer will work closely with engineering and sales teams to ensure system designs align with customer requirements, industry standards, and scalable manufacturing practices. Duties and Responsibilities: • Define and develop standardized TRW/TCW skid system platforms for data center cooling applications., • Generate technical documentation including system architecture diagrams, P&IDs, general arrangement drawings, and technical submittals., • Support business development teams during customer meetings by providing technical expertise and system architecture guidance., • Collaborate with engineering and manufacturing teams to ensure designs align with fabrication and assembly capabilities. Minimum Qualifications: • 5+ years of experience in mechanical engineering, applications engineering, or technical product marketing., • Experience working with fluid systems, pump skids, heat exchangers, or chilled water infrastructure., • Ability to interpret and develop engineering documentation including P&IDs, general arrangement drawings, and system diagrams., • Strong written and verbal communication skills with the ability to explain technical concepts to both engineering and commercial audiences., • Experience with data center cooling infrastructure or mission-critical mechanical systems., • Familiarity with liquid cooling architectures including coolant distribution units and heat exchanger systems., • Experience using CAD or engineering design tools such as SolidWorks, Inventor, or similar platforms., • Background in semiconductor or advanced manufacturing equipment systems. Minimum Education and Certification Qualifications: This role is primarily office-based with collaboration across engineering and manufacturing teams. Occasional work in manufacturing environments may be required to support product development and testing. Travel expectations include occasional domestic travel (approximately 10–20%) to support customer meetings and project development activities. Physical Demands: This role primarily involves desk-based work including extended periods of sitting and computer use. Occasional travel to manufacturing environments may require walking on production floors and wearing appropriate personal protective equipment. Ultra Clean Technology is proud to be an equal-opportunity employer. We are committed to equal employment opportunity regardless of race, color, national or ethnic origin, age, religion, disability, sexual orientation, gender, gender identity and expression, marital status, and any other characteristic protected under laws and regulations.

Job DescriptionFull Time Morgan Industrial Omega Morgan believes that each employee makes a significant contribution to our success. That contribution should not be limited by the assigned responsibilities. Therefore, this position description is designed to outline primary duties, qualifications and job scope, but not limit the individual nor the organization to just the work identified. It is our expectation that each employee will offer their services wherever and whenever necessary to ensure the success of our endeavors. Summary The Engineer will assist in planning, designing, and analyzing various heavy lifts and transport projects. They will work closely with the operations, permitting and dispatching team to provide credible and specialized engineering for current and future heavy lifts and transport projects. Remote work possible. This is deemed a safety sensitive position. Essential Duties and Responsibilities: • Become familiar with Omega Morgan's equipment and capabilities to support operations., • Plan and analyze heavy lift and transport projects., • Oversee project execution as required., • Travel as required to support projects, sales, planning, and operations., • Design equipment, create fabrication drawings, and supporting documentation., • Civil (Structural) or Mechanical Engineering Degree (PE / EIT preferred), • AutoCAD + 3D solid modeling, • FEA software experience, • MS Office, • Capable of working independently, • Minimum 5 years experience, 10+ preferred., • Understanding of rigging equipment/process, crane requirements, load calculations, and load charts., • Evaluation of lifting plans and activities.

Job Description WGNSTAR is a dynamic and growing company with a global footprint. Primarily focused on the semiconductor industry, we provide a platform for you to expand your career with knowledge gained on the job training, and tailored development. We know we need talented people like you that hold similar values, which is why we do not put limits on learning, development, industry, and personal growth. Start your path to a WGNSTAR career today! Schedule: Day Shift, M-F 8 Hour Days Pay Rate: $35 - $50 Hourly DOE Location: Hillsboro, Oregon Position Type: Full Time Benefits: This position is eligible for WGNSTAR’s full benefits package, including Medical, Dental, Vision, and 401(k). Additional benefits are listed at the end of this posting. The principal duties and responsibilities will be: • Chamber Wet Cleans, • Removal of chamber kits & fore lines, • Must be able to safely perform all necessary purging of both gas and liquid lines., • Pump purging of gas lines., • Flush drain and blowout residual liquids, • Disconnect and cap all gas and liquid lines., • Must be able to perform complete tool shutdown., • Power off all the system and related subcomponents, • Follow all LOTO and customer procedures., • Daily pre-task planning with customer, • Document all Decon activities (2D - Decon checklist), • Reporting status of Decon project., • Must have knowledge of Decon/Install/Deinstall on OEM equipment Additional Benefits: Paid Vacation, Select Holidays, Overtime Opportunities, On-site Facilities & Career Development Opportunities. The people who thrive most at WGNSTAR are those individuals who perform well in a team environment, enjoy interacting and engaging with several different stakeholders, and adapt quickly to changing environments, while leveraging their skills, quality, and knowledge to drive themselves and their teams towards continuous improvement and success. This job description is intended to convey information essential to understanding the scope of the job and the general nature and level of work performed by job holders within this job. This job description is not intended to be an exhaustive list of qualifications, skills, efforts, duties, responsibilities or working conditions associated with the position. This position is not eligible for visa sponsorship. All applicants must be legally authorized to work in the United States without the need for current or future sponsorship (e.g., H-1B, O-1, etc). Additionally, WGNSTAR does not participate in the STEM OPT extension program for this role. Equal opportunities and Social Governance WGNSTAR is an Equal Opportunity Employer, drug free workplace, and complies with ADA regulations as applicable. WGNSTAR places an immense emphasis on equal employment, encourages diversity in the workplace, and applies an open-door policy for inclusion of all employees. Our diversity program encourages people from any gender, background, ethnicity, culture, education, and experience to join the company and more importantly build a career through employee development. Through our Global wellness programs, WGNSTAR ensures our employees and families have access to a full range of wellness services through our Employee Assistance Program (EAP). In the communities that surround our business operations, we support individual and group sponsorships for local sports and those that are vulnerable in society. Powered by JazzHR CyrNLjcVwT

Job Description Omega Morgan believes that each employee makes a significant contribution to our success. That contribution should not be limited by the assigned responsibilities. Therefore, this position description is designed to outline primary duties, qualifications and job scope, but not limit the individual nor the organization to just the work identified. It is our expectation that each employee will offer his/her services wherever and whenever necessary to ensure the success of our endeavors. Mechanical Engineering Drafter knows how to turn complex concepts into precise, buildable drawings—especially in heavy lift and rigging environments. This role supports engineering and project teams by producing accurate technical drawings for transport, lifting, and installation of oversized or high-value equipment. Key Responsibilities • Develop detailed mechanical drawings, layouts, and schematics using CAD software (AutoCAD, SolidWorks, or similar), • Create fabrication, assembly, and rigging drawings for heavy lift and transport projects, • Interpret engineering calculations, specifications, and design inputs into clear, accurate drawings, • Work closely with engineers, project managers, and field teams to ensure drawings reflect real-world conditions, • Revise and update drawings based on field feedback, RFIs, and project changes, • Ensure all drawings meet industry standards, safety requirements, and company drafting practices, • Support lift planning documentation, including crane configurations, rigging details, and load paths, • 5+ years of mechanical drafting experience (more if you expect them to hit the ground running), • Proficiency in CAD software (AutoCAD required; SolidWorks or Inventor preferred), • Strong understanding of mechanical systems, fabrication methods, and structural interfaces, • Experience with crane lift planning and rigging drawings, • Familiarity with industry standards (ASME, ANSI, OSHA related to lifting/rigging), • Experience in industries like heavy industrial, construction, oil & gas, or specialized transport, • Field exposure—someone who understands that drawings have to work outside, not just on paper

Job Description Jireh Semiconductor is looking to add a Sustaining Mechanical Engineer to our Facilities Department. This position will be responsible for sustaining reliability, maintenance oversight, and system upgrades for mechanical infrastructure supporting semiconductor manufacturing operations. JOB SUMMARY Provides primary engineering support for critical facility utility systems including cooling towers, chillers, process cooling water (PCW), low-pressure steam boilers, compressed air systems, process vacuum system, air handling units (AHUs), and acid/solvent treatment systems. Works closely with facilities technicians, engineers, contractors, and management to support safety reviews, work planning, operational troubleshooting, and system improvements. Ensures facility systems operate at optimal performance levels to maintain stable manufacturing conditions and prevent unplanned factory interruptions. Leads and supports facility improvement projects from concept through design, installation, commissioning, and project closeout. DUTIES & RESPONSIBILITIES Administrative Duties: • Analyze facility system performance data and optimize operating conditions for HVAC and mechanical systems., • Generate and revise training documents for maintenance of cooling towers, chillers, process cooling water (PCW), low-pressure steam boilers, compressed air systems, process vacuum system, air handling units (AHUs), and acid/solvent treatment systems and associated piping/duct., • Review contractor safety documentation (SIPP forms) to ensure adherence to site procedures and prevent operational disruptions., • Manage facility infrastructure projects to ensure alignment with approved budgets, schedules, and project scope., • Develop technical specifications and engineering drawings for facility upgrade projects., • Ensure project closeout requirements are completed, including commissioning documentation, permit closure, and punch-list resolution., • Prepare Requests for Proposal (RFPs), obtain vendor quotes, evaluate proposals, and recommend contractor selection for facility projects., • Support procurement processes by preparing purchase requisitions (PRs), reviewing invoices, and tracking project expenditures., • Assist in training facilities technicians on the operation and maintenance of cooling towers, chillers, process cooling water (PCW), low-pressure steam boilers, compressed air systems, process vacuum system, air handling units (AHUs), and acid/solvent treatment systems and associated piping/duct., • Oversee contractor construction and facility fit-up activities to ensure compliance with site safety policies and operational requirements., • Assist in semiconductor tool installs in cleanroom environment., • Continuously evaluate products and make recommendations regarding alternative mechanical and tool hookup equipment, materials and installation methods., • Audit existing mechanical systems and insure specifications are met., • Troubleshoot out of specification problem(s)., • Identify problem and implement solution., • Review, comment and approve various engineering designs for compliance with company policies and specifications as well as governmental requirements., • Conduct routine plant rounds to verify mechanical systems are operating within design parameters., • Assist in responding to facility system alarms using safe work practices, troubleshooting techniques, and established escalation procedures., • Support facilities technicians during preventive maintenance (PM) and corrective maintenance activities., • Perform field walks to identify system deficiencies, verify P&IDs, and support project execution while maintaining safety and fab uptime. BS degree or higher in Mechanical Engineering 3+ Years of Relevant Experience Ability to manage complex projects is a plus Experience working around a fully operating semiconductor fab is a plus Sustaining maintenance and system retrofit experience Microsoft Office, Microsoft Project and AutoCAD is a plus Good communication and negotiation skills Ability to get along with/work with personnel at all levels of Jireh Ability to use the following codes: UBC, UFC, NFPA, ASTM, ANSI *Pay range listed in this job posting is an estimate only, and is not necessarily reflective of actual compensation that may be earned, nor a promise of pay for any specific employee future or past. Offers made are always dependent upon actual experience, education and other factors. COMPANY INFORMATION: Alpha and Omega Semiconductor (AOS) is committed to excellence in design, manufacturing, and responsiveness to our customers through the continued development of new technologies, products and innovative solutions. We bring to the market devices designed to benefit our customers by meeting their product specific needs. Our mission is to bring value to our customers, shareholders and employees. AOS differentiates itself by integrating its Discrete and IC semiconductor process technology, product design, and advanced packaging know-how to develop high performance power management solutions. AOS's portfolio of products targets high-volume applications, including but not limited to portable computers, flat panel TVs, LED lighting, smart phones, battery packs, consumer and industrial motor controls and power supplies for TVs, computers, servers and telecommunications equipment. Jireh Semiconductor, Inc., a wholly owned subsidiary of Alpha and Omega Semiconductor Ltd., is the in-house wafer fab for AOS and is located in Hillsboro, Oregon. EEO Statement: Jireh Semiconductor prohibits discrimination based on race, color, religion, gender, national origin, age, disability, veteran status, marital status, pregnancy, gender expression or identity, sexual orientation or any other legally protected status. Job Posted by ApplicantPro

Job Description Position Summary: Conceives, investigates, evaluates, and makes recommendations for new equipment, tooling and processes to improve safety, reliability, capacity and reduce costs. Performs complex analysis, design, and/or assembly related to manufacturing or industrial engineering projects. Investigates and analyzes unique or highly technical manufacturing or industrial engineering assignments and provides technical assistance in establishing operational procedures and methods. Performs technical surveillance of a complex nature in the control of product, design concepts, and specification requirements. Evaluates engineering changes and determines appropriate labor or equipment standards to meet specification requirements. Utilizes systematic problem solving and data collection to identify and resolve problems, including driving cost and downtime reduction. Leads and/or participates in health, safety, environmental, production, material control, Sig Sigma and R&D project teams. Writes weekly activity and project reports, develops action plans, and generates work instructions, test procedures and other documentation to support production operations. Essential Duties and Responsibilities include, but are not limited to: * Develop aircraft fabrication, assembly, and installation work instructions by evaluating engineering drawings, tool designs, process specifications, and equipment specifications * Evaluate and recommend tools and equipment for the support of manufacturing * Perform root cause corrective action for the support of manufacturing * Train and work with other engineers and planners * Prioritize and adjust work flow to meet customer needs * Participate and incorporate Lean Manufacturing and initiatives * Provide liaison support for production floor via work instruction and manufacturing bill of materials modifications * Understand and be aware of customer schedules and current engineering resources to match the needs and delivery dates on the schedule * Regular and reliable attendance * Other duties as assigned Quoting & Process Development Evaluate new parts, define manufacturing strategies, and build accurate, competitive quotes and estimate accurate lead times CNC programming Develop and refine programs for a wide range of equipment including: 3-axis, 4-axis, and 5-axis mills 2-axis, 3-axis, and full mill-turn lathes Production Support Work side-by-side with machinists to launch jobs, troubleshoot issues, and keep production running efficiently. Training & Mentorship Help elevate the team by sharing knowledge, improving processes, and developing best practices. Root Cause Analysis & Continuous Improvement Identify issues, compile and review data, and implement long-term solutions—not just quick fixes. Qualifications: • Excellent attention to detail and organizational skills, • Strong written and verbal communication skills, • Thrives in fast paced environment that requires effective multi-tasing, • CAM experience (Mastercam/Esprit), • Experience with lean manufacturing, • Ability to identify and resolve problems in a timely manner or develop alternative solutions, • Proficient in the use of all Microsoft Office programs and Windows operating system, • Ability to thrive in a changing, fast-paced growing and dynamic business, • Detail oriented and able to manage multiple projects simultaneously, • Extended screen time, • Sitting/standing/walking, • Potentially long hours, • Ability to distinguish color, • Occasional lifting up to 50 pounds Supervisory Responsibilities: None. Travel Required: Minimal Note: This job description in no way states or implies that these are the only duties to be performed by the employee(s) of this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the employee(s) will possess the skills, aptitude, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety to themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an at will relationship. Affirmative Action/Employment Opportunity (EEO) Statement: ALIGN PRECISION is an equal opportunity employer and values diversity at our company. We are committed to creating a workplace where all qualified individuals are welcome and can thrive, regardless of race, religion, color, national origin, gender, sexual orientation, gender identity, age, marital status, veteran status, disability status, or any other characteristics protected by law.

Job Description POSITION SUMMARY We are looking for an Equipment Engineer to support our CMP/EPI departments at Jireh Semiconductor, the 8 inch wafer fabrication facility of Alpha and Omega Semiconductor located in Hillsboro, OR. The Equipment Engineer will be responsible for new equipment installation planning, install, startup, PM program and procedures, spare parts requirements, technician training programs, and overall equipment uptime performance. RESPONSIBILITIES/DUTIES • Perform routine preventative maintenance as needed to ensure equipment performance., • Develop and maintain equipment specs., • Develop and execute corrective maintenance plans for equipment., • Work closely with counterparts in the equipment, production, and process groups to ensure that work is scheduled and prioritized to best support production while ensuring the quality of our product., • Develop, implement and maintain training programs for technician certification on area equipment, • Develop, implement equipment improvement plans., • Participate in the selection / interview process for technician hiring, transfers, and cross-training., • Oversee equipment relocation and installations., • 3+ years of Fab experience on relevant semiconductor equipment., • Strong technical capability., • Ability to troubleshoot system problems to board level required, component level preferred., • Ability to analyze equipment schematics for advanced troubleshooting of complex problems, • Experience on the following EPI tool sets preferred:, • ASM EPSILON 2000/ LPE PE3061D / AMAT 7700 EPITAXY, • Experience on the following CMP tool sets preferred:, • AMAT Mirra Polishers , LAM Ontrak Scrubbers, • Experience with any of the following tool sets a plus: Disco grinder, tape/detapers, KLA/Tencor Measurement Equipment, MCV metrology equipment, • Familiarity with SPC, FMEA, and standard engineering practices., • Strong communication and team work skills. COMPANY INFORMATION: Alpha and Omega Semiconductor (AOS) is committed to excellence in design, manufacturing, and responsiveness to our customers through the continued development of new technologies, products and innovative solutions. We bring to the market devices designed to benefit our customers by meeting their product specific needs. Our mission is to bring value to our customers, shareholders and employees. AOS differentiates itself by integrating its Discrete and IC semiconductor process technology, product design, and advanced packaging know-how to develop high performance power management solutions. AOS's portfolio of products targets high-volume applications, including but not limited to portable computers, flat panel TVs, LED lighting, smart phones, battery packs, consumer and industrial motor controls and power supplies for TVs, computers, servers and telecommunications equipment. EEO Statement: Jireh Semiconductor prohibits discrimination based on race, color, religion, gender, national origin, age, disability, veteran status, marital status, pregnancy, gender expression or identity, sexual orientation or any other legally protected status. Jireh Semiconductor, Inc., a wholly owned subsidiary of Alpha and Omega Semiconductor Ltd., is the in-house wafer fab for AOS and is located in Hillsboro, Oregon. Job Posted by ApplicantPro

Job Description POSITION SUMMARY Jireh is looking for an experienced Process Integration Engineer to join their team. As a Process Integration Engineer, you will work in a dynamic team environment at AOS Semiconductor's leading technology fabrication facility (Jireh Semiconductor) located in Hillsboro, Oregon. This focus of this position is to work with device/process module/product engineering group to develop silicon power device process technology and improve existing technology yield. Primary responsibilities are to process flow implementation, electrical characterization (failure analysis), and wafer level testing yield monitoring. We prefer to find a staff level candidate, but will also consider senior level candidates. DUTIES & RESPONSIBILITIES • Perform process simulation, Create technology process flows with process specifications, • Work with process module team to define test structures for process integration and process module development., • Design statistical experiments and analyze results to optimize device architecture and/or process modules. Perform device characterization and report on the results, • Collaborate with design groups within the company to troubleshoot device related problem, provide documentation and expertise to maximize the efficient use of process technologies, • Develop devices that ensure the highest level of reliability for products. Work with the Product Engineering and Reliability group to test, characterize and evaluate device and process, • New Product Introduction, • Collaborate with product engineering team to perform NPI (New Product Introduction) on existing platform (analysis DOE/Pre-Production lots data/documentation according NPI procedure to release new product), • Yield monitor/improvement, • response to newly released platform safe launch stage yield monitor/improvement actions, • low yield root cause identification (through failure analysis, inline data analysis and lot history), • Master's or PhD in Electrical Engineering or a related engineering degree, • 3+ years of experience in a development role ( power device development is preferred) The ideal candidate will have knowledge of semiconductor device physics and experience with device processing and integration, test structure definition, design rule generation, DOE, failure analysis, process control document (PCD) generation, and device characterization. Experience with discrete power devices is preferred *Pay range listed in this job posting is an estimate only, and is not necessarily reflective of actual compensation that may be earned, nor a promise of pay for any specific employee future or past. Offers made are always dependent upon actual experience, education and other factors. Depending upon experience, candidates may receive an offer for a position level lower or higher than that listed, i.e. application to a Staff level position does not guarantee an offer of Staff title. COMPANY INFORMATION: Alpha and Omega Semiconductor (AOS) is committed to excellence in design, manufacturing, and responsiveness to our customers through the continued development of new technologies, products and innovative solutions. We bring to the market devices designed to benefit our customers by meeting their product specific needs. Our mission is to bring value to our customers, shareholders and employees. AOS differentiates itself by integrating its Discrete and IC semiconductor process technology, product design, and advanced packaging know-how to develop high performance power management solutions. AOS's portfolio of products targets high-volume applications, including but not limited to portable computers, flat panel TVs, LED lighting, smart phones, battery packs, consumer and industrial motor controls and power supplies for TVs, computers, servers and telecommunications equipment. Jireh Semiconductor, Inc., a wholly owned subsidiary of Alpha and Omega Semiconductor Ltd., is the in-house wafer fab for AOS and is located in Hillsboro, Oregon. EEO Statement: Jireh Semiconductor prohibits discrimination based on race, color, religion, gender, national origin, age, disability, veteran status, marital status, pregnancy, gender expression or identity, sexual orientation or any other legally protected status. Job Posted by ApplicantPro

Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination w

In this role, you will do more than simply find bugs; you will help build the sophisticated engineering backbone that ensures our media processing and streaming services remain world class and collaborate directly with developers to bake quality into the code from the start. Debug and troubleshoot c

Bachelors Degree in Mechanical Engineering (or Similar) OR 10+ Years of Experience. Hands on Mechanical Engineer opening!.

As a Field Service Engineer [Customer Engineer] at Applied Materials, you serve as the direct liaison with customers, collaborating closely to install, maintain, and upgrade equipment. Applied Materials is a global leader in materials engineering solutions used to produce virtually every new chip an

Work for THE insurance defense firm of the Southeast.This Jobot Job is hosted by: Farrell Ougheltree.Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume.Salary: $90,000 - $160,000 per year.Our client is a growing, highly-respected regional insurance defe

You'll partner closely with Material Supply Chain, Product Development, Material Development, Manufacturing Systems Engineering, and collaborate with material vendors and factories across the Americas region to ensure quality standards are met. Nike is seeking a detail-driven, proactive engineer wit

Embark with us on a journey of growth and transformation as we create exceptionally engineered technology and bring AI everywhere. Intel is seeking a dynamic Supply Chain Engineer to drive innovation and excellence in supply chain and logistics strategy. Take advantage of this opportunity to join In

Support Engineer (Networking, ITOT) Location: Hillsboro, OR Duration 1 year extendable Main Purpose of the Position: Providing technical support for Genentech staff in the GxP Manufacturing and Quality area.

They also advise and guide other Test Engineers and Software Engineers in automation practices and tooling. Summary Position is intended for highly skilled, experienced Test Automation Engineers with advanced knowledge of automated testing frameworks, tools, and practices. Typical Years of Experienc

A degree in mechanical engineering, aerospace engineering, naval architecture, marine engineering, or another related engineering discipline. They strive to be the best engineering team on the planet and they compensate their engineers accordingly. Understanding of engineering fundamentals relevant

Experience with electrical engineering power distribution design projects, mission critical facilities experience is a plus.

Embark with us on a journey of growth and transformation as we create exceptionally engineered technology and bring AI everywhere. Intel is seeking a dynamic Supply Chain Engineer to drive innovation and excellence in supply chain and logistics strategy. Take advantage of this opportunity to join In

Bachelor’s degree in Mechanical Engineering or related field. Professional Engineer (PE) license is a plus. PTS Advance is seeking an experienced MEP Mechanical Design Engineer to join our growing team.

Experience with electrical engineering power distribution design projects, mission critical facilities experience is a plus.

Bachelor's degree in Electrical Engineering, Computer Engineering, or STEM-related field. The Central Engineering Group (CEG) is Intel's data-driven organization that builds scalable engineering solutions across three pillars: Product Enablement (IP, tools, and methodologies), Custom ASIC (leveragin

A degree in mechanical engineering, aerospace engineering, naval architecture, marine engineering, or another related engineering discipline. They strive to be the best engineering team on the planet and they compensate their engineers accordingly. Demonstrated experience building teams, leading, an

Journeyman Stationary Engineer or five (5) years experience in HVAC, plumbing, electrical maintenance and repair. Under general supervision of the Maintenance Manager, Chief Engineer, or their designee, and provides continuous mechanical and electrical support service and repairs necessary to effect

Chief Engineer - Engineering Supervisor - Chief Engineer - Area Chief Engineer. Previous engineer/maintenance experience or equivalent training required.

Collaborate with multidisciplinary teams, including architects, electrical engineers, and contractors. Bachelor’s degree in Mechanical Engineering or related field. Professional Engineer (PE) license is a plus.

Min 5 years’ experience in manufacturing engineering, quality and /or supply chain of relevant experience.

Bachelors or Masters Degree in Electrical Engineering, Materials Science, Mechanical Engineering or Chemical Engineering or related field. Semiconductor Packaging, Assembly / Test or Backend Manufacturing, Operations, Product Engineering, Field Applications or customer-facing engineering. Collaborat

Min 5 years’ experience in manufacturing engineering, quality and /or supply chain of relevant experience.

This position is ideal for an experienced service engineer wanting to be involved with a team with varied strengths and exposed to a constant variety of customer application areas.

Chief Engineer – Engineering Supervisor – Chief Engineer – Area Chief Engineer. Previous engineer/maintenance experience or equivalent training required.

Accenture is a leading global professional services company that helps the world's leading businesses, governments and other organizations build their digital core, optimize their operations, accelerate revenue growth and enhance citizen services-creating tangible value at speed and scale.We are a t

Serve as a technical lead, supervise field service engineers , collaborate with engineering, and ensure customer equipment operates efficiently with minimal downtime. Field Service Engineer Lead - Semiconductor. Collaborate with engineering to conduct tests, experiments, and analyze equipment data t

Are you a seasoned engineer passionate about building robust, scalable, and observable systems? We are seeking a highly skilled and motivated individual to join our team and play a pivotal role in optimizing our critical infrastructure. Minimum of 5 years of relevant engineering experience. Prior ex

Expert in Spark, Python scripting and strong in SQL.SPARK; Python EMR; Hadoop on AWS.Reporting and Advance Analytics solutions using Big Data technologies.Hands-on experience AIRFLOW; GLUE; AWS DataPipeline or similar services on AWS.Experience with Database solutions on cloud such as Redshift or Sn

Lead Engineer, Materials Quality Engineering- Business Operations. Lead Engineer, Materials Quality Engineering- Business Operations. This role is critical to achieving Global Materials Quality Engineering and Entegris corporate goals by ensuring supply chain continuity and delivering consistent,hig

Certified Quality Engineer, preferred. Ability to read and interpret engineering drawings with standard and geometric dimension and tolerance. Work Environment for a Quality Engineer 2:.

Mechanical Engineering, Materials Engineering, Plastics Engineering, Chemical Engineering. This role serves as the technical owner fordefining moldperformanceand design improvements,andworking crossfunctionally with Manufacturing Engineering, Equipment Engineering,andOperations. Lead Engineer, Produ

This Applications Engineer will support full-stack development within site reliability engineering (SRE) incident management solutions. We are seeking a talented Applications Engineer to contribute directly to the stability and performance of essential systems, ensuring seamless operations and enhan

Chemistry, Chemical Engineering, Mechanical Engineering, or Materials Engineeringrequired. Develop, launch, and managenew programsthat drive strategic quality initiatives for the global Materials Quality Engineering (MQE) organization. Lead Engineer, Materials Quality Program Management.