Computer technology jobs in Hartford, ConnecticutCreate job alerts

Flat rate: $50-$55 based on experience. # POSITION SUMMARY: Under the direct supervision of a Radiologist the CT Technologist performs exams at a technical level that does not require direct supervision over technical detail. This position requires advanced#medical imaging knowledge, including skill in cross-sectional anatomy.## A complete knowledge of all types of diagnostic CT exams and interventional procedures is required. Uses independent judgment, ingenuity and acquired knowledge to obtain quality diagnostic images. Assists with interventional procedures. # # # EDUCATION/CERTIFICATION: A high school diploma or GED equivalent; graduate of an ARRT approved Radiological Technology School program is required. Registration and certification with the American Registry of Radiological Technologists and licensure with the State of Connecticut are required. ## Must remain current with ARRT continuing education requirements and maintain an active ARRT certificate. # Advanced certification from the ARRT in Computerized Tomography is expected from the incumbent within one year of hire.## Must have certification in Basic Cardiac Life Support upon hire and maintain clinical competency during employment with ECHN in this role. COMPETENCIES: Must have a full knowledge of CT exams and interventional procedures. Technologist must be capable of performing exams independently.# Must have complete working knowledge in the principals of physics, anatomy, medical terminology, sterile technique and radiation protection as it relates to CT practice. Must be able to speak, read and write effectively using the English language.# This position requires the incumbent work cooperatively with department staff by sharing in taking rotational call and holiday hours. ESSENTIAL DUTIES and RESPONSIBILITIES: Disclaimer: Job descriptions are not intended, nor should they be construed to be, exhaustive lists of all responsibilities, skills, efforts or working conditions associated with the job.# They are intended to be accurate reflections of the principal duties and responsibilities of this position.# These responsibilities and competencies listed below may change from time to time. # ######### Job-Specific Competency 1.##### Assures that patient#s clinical data coincides with and matches the type of exam that is being ordered.# Follows up with Doctor#s office when exam ordered is in question and does not seem reasonable given the patient#s clinical record. 2.##### Assist Radiologist in interventional procedures. Coordinates patient#s medical needs with the Radiology Nurse.# Assures that room is properly equipped for procedure and cleaned appropriately post procedure. 3.##### Assures female patients of child bearing ages are screened for possibility of pregnancy. 4.##### Demonstrates skill in IV insertion. 5.##### Documents exams into radiology system to ensure proper billing. 6.##### Independently runs one#s own schedule and properly documents patient flow while remaining sensitive to patients care and other co-workers needs and desires.# Remains flexible in patient flow in order to accommodate daily emergency calls and requests for inpatient procedures.# Assists in obtaining transportation for patients when procedures are scheduled by internal Hospitalists, Physicians, etc. 7.##### Demonstrates competency in performing all types of CT scans 8.##### Processes CT exams utilizing the teleradiology system during off shift hours.# Able to trouble shoot problems and contact correct help lines if necessary. 9.##### Demonstrates the ability to choose correct protocols for patients based on age and size. 10.# Accurately completes computer (Meditech) patient procedure documentation.# Assures the accuracy of documentation understanding that all items will be charged to the patient#s hospital bill.# Submits correctly documented and labeled exam to the Radiologist and is available for review and discussion. Reviews each exam for technical accuracy. 11.# Transports patients when needed. 12.# Performs quality assurance in accordance with the American College of Radiology guidelines for CT. 13.# Reviews post instructions to patient (example: hydration, when physician will receive results) 14.# Demonstrates ability to trouble shoot any electronic equipment such as scanner, workstations, and printers. 15.# Independently responds on a call basis to perform procedures.# Drives to affiliate and/or contracted location to provide services as may be required. 16.# Works cooperatively and exhibits Core Values at all time in order to accomplish all tasks as a member of the Medical Imaging Team.

Position Highlights • Department: Urgent Care Middletown, • Work Schedule: Per Diem Position Summary Performs imaging procedures for patients in Urgent Care environment to ensure high-quality patient care. May also perform tasks of Medical Assistant as needed. Essential Duties & Responsibilities Under general supervision or direction: * Provides patient care essential to imaging procedures. Exercises professional judgment in the performance of procedures and in accordance with the health system policies, protocols and standards. * Demonstrates proficiency in the operation of all relevant equipment and computer systems. * Function as a Medical Assistant to room patients; obtain vitals, reconcile medications, and interview patients to identify chief complaints. * Ensures proper documentation as needed in the EMR system. * Uses initiative, good judgment and technical expertise to perform a wide-range of imaging procedures. * Applies the principles of teamwork in all aspects of providing patient services. Other Responsibilities: * Adheres to all Core Values (Compassion, Pursue Excellence, Cooperation and Collaboration, Upholds Honesty, and Supports Innovation). * Adheres to all Absolutes (Privacy and Confidentiality, Professional Appearance, and Responsibility and Commitment). * Other job related duties as assigned. Minimum Qualifications * Graduate of a JRCERT accredited Radiography program * ARRT Certification/Eligible in good standing * State of Connecticut License/Eligible * Good judgment and problem solving skills with the ability to function independently and make decisions * Good organizational skills with the ability to handle several tasks/projects simultaneously required Preferred Qualifications * Three to five years experience as Registered Radiologic Technologist (ARRT, RDMS, NMTCB etc) required. * Bachelor degree or equivalent experience * Demonstrated competency in imaging modalities * Excellent communication skills (oral and written) with the ability to interact positively with all levels of health care workers and guests required * Flexibility and teamwork to ensure positive patient care * Computer skills including word processing and spreadsheets Comprehensive Benefits Offered • Competitive and affordable benefits package, • Shift Differentials, • Continuing Education assistance, • Tuition reimbursement, • Student Loan relief through Fiducius, • Quick commute access from I-84, Route 9 and surrounding areas About Middlesex Health The Smarter Choice for your Career! Come join one of Connecticut’s Top Workplaces, and a Magnet designated organization! At Middlesex Health, we have a unique combination of award-winning talent, world-class technology, and patient-first care that's making health care better. Through our affiliation with the Mayo Clinic Care Network, Middlesex Health has access to the most advanced medical knowledge and research available.

MedPro Healthcare Allied Staffing is seeking a travel MRI Technologist for a travel job in Farmington, Connecticut. Job Description & Requirements • Specialty: MRI Technologist, • Discipline: Allied Health Professional, • Start Date: 10/31/2025, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, evenings, • Employment Type: Travel MedPro Healthcare Staffing, a Joint Commission-certified staffing agency, is seeking a quality MRI Tech for a contract with one of our top healthcare clients. Requirements • Completion of a two year approved School of Radiologic Technology, • Valid state radiology registration as required by state law, • Eighteen months of MRI Tech experience preferred, ideally in a critical care setting., • Weekly pay and direct deposit, • Full coverage of all credentialing fees, • Private housing or housing allowance, • Group Health insurance for you and your family, • Company-paid life and disability insurance, • Travel reimbursement, • 401(k) matching MRI technologists utilize their knowledge of anatomy, physiology and the principles of MRI to safely and efficiently operate MRI scanners, assisting in the diagnosis of disease and injury. • Ensure the safety of patients, staff and visitors who come in contact with the powerful magnetic field of a MRI scanner., • Position patients and coils on a table that slides inside the MRI scanner., • Inject contrast media as required., • Set appropriate technical parameters, operate MRI scanners and related equipment, and observe image data on computer monitors during scans., • Be familiar with the differences from a normal image and an abnormal image., • Recognize and respond to life threatening situations., • Assure compliance with federal, state, and local technical and professional regulations and accepted practiced guidelines., • Delivers quality, cost effective patient care in a professional manner., • Works effectively to maintain an environment of excellence, which is patient focused, providing timely, compassionate, quality patient care. MedPro Healthcare Staffing is a Joint Commission certified provider of contract staffing services. Since 1983, we have placed nursing and allied travelers in top healthcare facilities nationwide. Join us today for your very own MedPro Experience®. If qualified and interested, please call for immediate consideration. MedPro Staffing is an Equal Opportunity Employer. All applicants will be considered for employment without attention to race, color, religion, national origin, age, sex, disability, marital status or veteran status. Key Words: MRI Tech, MRI Technician, MRI Technologist, Magnetic Resonance Technologist, Magnetic Resonance Imaging *Weekly payment estimates are intended for informational purposes only and include a gross estimate of hourly wages and reimbursements for meal, incidental, and housing expenses. Your recruiter will confirm your eligibility and provide additional details. MedPro Job ID #a0Fcx000007PDfbEAG. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: MRI Technologist Imaging: MRI Technologist. About MedPro Healthcare Allied Staffing No One Cares More for Caregivers Than MedPro. Focus on your patients, we’ll take care of the rest. MedPro Healthcare Staffing is a Joint Commission certified provider of temporary and contract staffing services. Since 1983, we have placed happy nursing and allied travelers in top healthcare facilities nationwide. You deserve a travel experience that’s rewarding and memorable. One that allows you to DREAM big. EXPLORE often. And ACHIEVE greatness. The MedPro Experience® delivers it! • Access to nationwide travel assignments, • Weekly pay and direct deposit, • Full coverage of all credentialing fees, • Private housing or housing allowance, • Group Health insurance for you and your family, • Tax Free Per Diems, Housing Stipends and Travel Reimbursements, • Company-paid life and disability insurance, • Travel reimbursement, • Access to our Clinical Nurse Liaison Team, • 401(k) matching, • Unlimited Referral Bonuses starting at $500Benefits, • Weekly pay, • Employee assistance programs, • Referral bonus

Job Description $10,000.00 sign-on bonus will be offered to well-qualified candidates. Join Midstate Radiology Associates (MRA) as a 1st Shift, Full-Time, MRI Technologist at Hospital of Central Connecticut in New Britain. Position Schedule: Mon 8:00 AM - 8:00 PM, Sat & Sun 7:00 AM - 7:00 PM. Compensation: MRA offers competitive starting compensation based on qualifications and experience. The compensation range for this position is between $33.00 and $59.00 per hour + applicable shift differentials Compensation: MRA offers competitive starting compensation based on qualifications and experience. The compensation range for this position is between $32.00 and $57.00 per hour + applicable shift differentials Job Summary: Operates equipment and performs diagnostic and therapeutic MRI procedures on patients according to established protocols to assist the physician in diagnosis and treatment. Follows established policies and procedures set by the department, hospital, state, ACR, TJC, and OSHA. Key Accountabilities: • Performs diagnostic MRI scanning procedures by selecting correct technique while utilizing the assessment of patient age and diagnosis to produce a technically accurate cross sectional images to assist the radiologist in diagnosis and treatment., • Participates in complex invasive MRI exams by assisting the radiologist in performing the procedure using proper sterile technique and producing MRI images in order to provide therapeutic and diagnostic services., • Start intravenous sites, assess existing sites and inject intravenous contrast according to established protocols to assist the radiologist in diagnosis., • Practices according tp sites MRI Safety Policy ., • Maintain the MRI equipment in good operating order. Clean and disinfect equipment and area after each use. Maintain work area in an orderly manner. Report any hazardous conditions or equipment breakdowns to supervisor., • Demonstrates yearly competencies, including knowledge and behaviors, to conduct examinations and meet the needs of patients with regard to the patient’s age, condition or other special requirements., • Assess physician’s order and patient’s requisition for completeness by reviewing the requisition, pertinent laboratory results and the patient’s chart to ensure the correct procedure and protocol is performed., • Documents pertinent patient and exam information and stores computerized images onto an archive media for future reference or retrieval., • Routinely prepare examination for interpretation by the radiologist to include correct identification and processing. Set up films properly in PACs system. Accurately inputs data in the RIS by tracking actual procedure in order to capture all charges and other relevant information., • Possess computer skills appropriate to meet departmental needs in preparation of reports and correspondence., • Performs and documents weekly quality assurance testing on equipment according to established protocols to maintain high performance of the system., • Works effectively as a team member within the department and with other units to provide quality service through communication, cooperation and collaboration. Qualifications Guidelines: Education Required: • High school diploma or equivalent., • Graduate AMA approved radiology program., • Registered with American Registry of Radiological Technologists (ARRT), • CT state license., • CPR certification may be required., • Maintenance of continuing education credits as required by licensure., • At least one year’s experience as a radiological technologist, • Working knowledge applicable to radiological technology with specific references to anatomy, medical and surgical disease, and scientific principles as applied to radiological technology., • Patient care standards and requirements., • Quality assurance principles and practices., • Customer service principles and practices., • OSHA principles and practices., • Operate MRI equipment., • Schedule, organize and monitor patient flow to meet company productivity, quality, health and safety standards., • Communicate effectively with patients, relatives, medical staff and co-workers., • Venipuncture certificate (where applicable)., • Maintain the confidentiality of patient records., • Schedule, organize and complete work in accordance with required workloads., • Read, interpret and follow internal quality standards and government regulations., • Understand and follow specifications and instructions., • Ability to react calmly and effectively in emergencies. May be required to rotate on night, weekend and/or holiday call schedule. May be required to cover ancillary offices, as needed. OSHA Class 1 exposure to Bloodborne Pathogens. May involve physical lifting and/or walking. Our team at Midstate Radiology Associates benefits from a diverse workforce and we welcome anyone to apply: Midstate Radiology Associates is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. To learn more about Midstate Radiology Associates, including more information on employee benefits and our company culture, please visit our website: . Weekly Schedule: Mon 8:00 AM - 8:00 PM, Sat & Sun 7:00 AM - 7:00 PM Weekly Hours: 36 Compensation details: 33-59 Hourly Wage PIe94380a94a20-25405-38610193

Job Description Location: Manchester, CT Schedule: Monday - Friday: 2p - 10p Hours: 40 hrs/wk OPENINGS Olcott MondayTuesdayWednesdayThursdayFridaySaturdaySundayTotal HoursSchedule2p - 10p 2p - 10p2p - 10p2p - 10p2p - 10p 40 Job Summary: The Direct Support Professional (DSP)will provide individualized support to individuals(s) with intellectual disabilities. The DSP must be able to effectively work with or without direct supervision, work cooperatively within a team setting, handle crisis situations calmly and professionally and interact with others in a courteous and professional manner. The DSP must also be able to adapt to the flexible nature of the job and work in a busy and fast paced environment. Supervisor: • Provide daily instruction and assistance in accordance with each person’s individual need, including, but not limited to:, • Meal planning and preparation/menus and dietary guidelines followed., • Leisure time planning and development of hobbies., • Medication administration., • Money management and making purchases of personal items., • Transportation., • Home maintenance., • Personal hygiene., • Personal appointments, medical appointments, and social commitments., • Complete all necessary documentation while on shift to include, but not limited to behavior plans, individual's goals, financial records, communication log, nursing log, incident reports and medication Kardex., • Maintain records of supported individual(s) care, conditions, progress, or problems to report and discuss observations with manager/supervisor and clinical., • Provide necessary support/ treatment and documentation for unusual incidents., • Ensure confidentiality of individuals supported and the agency., • Maintain positive and diplomatic relationships with families, advocates and friends of the individuals supported by the agency., • Accompany supported individual(s) to doctors’ offices and/or on other trips outside the home, providing transportation, assistance, and companionship., • Responsibly manage and record house petty cash and the funds of each supported individual according to agency policy., • Work cooperatively and professionally with coworkers, residential support managers administrative personnel, clinical and community providers., • Read all daily communications, keep updated on relevant issues and communicate problems/ concerns involving individuals supported in the program to the support manager., • Throughout employment successfully meet and maintain the requirements of all certifications and training as established by regulatory bodies and the agency’s policies and procedures., • Demonstrate knowledge of emergency procedures and respond appropriately as needed., • Attend and participate in required staff meetings., • Provide emergency coverage as needed., • Perform other related duties as requested. Required Skills/Abilities: • Strong customer service orientation., • Experience working with people who are intellectually/developmentally disabled preferred., • Understanding of basic concepts of personal care, housekeeping and other care areas., • Current driver's license required., • High school diploma or equivalent required., • Prolonged periods of standing, sitting, walking., • Ability to bend, push, pull and lift., • Must be able to lift up to 50 pounds at times. Note: The elements listed above are intended only as illustrations of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar, related, or logical assignment to the position.

Job DescriptionLocation: Windsor, CT Schedule: Saturday, Sunday: 7a - 3p Hours: 16 hrs/wk OPENINGS Millbrook MondayTuesdayWednesdayThursdayFridaySaturdaySundayTotal HoursSchedule 7a - 3p7a - 3p16 Job Summary: The Direct Support Professional (DSP)will provide individualized support to individuals(s) with intellectual disabilities. The DSP must be able to effectively work with or without direct supervision, work cooperatively within a team setting, handle crisis situations calmly and professionally and interact with others in a courteous and professional manner. The DSP must also be able to adapt to the flexible nature of the job and work in a busy and fast paced environment. Supervisor: • Provide daily instruction and assistance in accordance with each person’s individual need, including, but not limited to:, • Meal planning and preparation/menus and dietary guidelines followed., • Leisure time planning and development of hobbies., • Medication administration., • Money management and making purchases of personal items., • Transportation., • Home maintenance., • Personal hygiene., • Personal appointments, medical appointments, and social commitments., • Complete all necessary documentation while on shift to include, but not limited to behavior plans, individual's goals, financial records, communication log, nursing log, incident reports and medication Kardex., • Maintain records of supported individual(s) care, conditions, progress, or problems to report and discuss observations with manager/supervisor and clinical., • Provide necessary support/ treatment and documentation for unusual incidents., • Ensure confidentiality of individuals supported and the agency., • Maintain positive and diplomatic relationships with families, advocates and friends of the individuals supported by the agency., • Accompany supported individual(s) to doctors’ offices and/or on other trips outside the home, providing transportation, assistance, and companionship., • Responsibly manage and record house petty cash and the funds of each supported individual according to agency policy., • Work cooperatively and professionally with coworkers, residential support managers administrative personnel, clinical and community providers., • Read all daily communications, keep updated on relevant issues and communicate problems/ concerns involving individuals supported in the program to the support manager., • Throughout employment successfully meet and maintain the requirements of all certifications and training as established by regulatory bodies and the agency’s policies and procedures., • Demonstrate knowledge of emergency procedures and respond appropriately as needed., • Attend and participate in required staff meetings., • Provide emergency coverage as needed., • Perform other related duties as requested. Required Skills/Abilities: • Strong customer service orientation., • Experience working with people who are intellectually/developmentally disabled preferred., • Understanding of basic concepts of personal care, housekeeping and other care areas., • Current driver's license required., • High school diploma or equivalent required., • Prolonged periods of standing, sitting, walking., • Ability to bend, push, pull and lift., • Must be able to lift up to 50 pounds at times. Note: The elements listed above are intended only as illustrations of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar, related, or logical assignment to the position.

Job DescriptionLocation: Manchester, CT Schedule: Saturday, Sunday: 4p - 10p Hours: 12 hrs/wk Job Summary: The Direct Support Professional (DSP)will provide individualized support to individuals(s) with intellectual disabilities. The DSP must be able to effectively work with or without direct supervision, work cooperatively within a team setting, handle crisis situations calmly and professionally and interact with others in a courteous and professional manner. The DSP must also be able to adapt to the flexible nature of the job and work in a busy and fast paced environment. Supervisor: • Provide daily instruction and assistance in accordance with each person’s individual need, including, but not limited to:, • Meal planning and preparation/menus and dietary guidelines followed., • Leisure time planning and development of hobbies., • Medication administration., • Money management and making purchases of personal items., • Transportation., • Home maintenance., • Personal hygiene., • Personal appointments, medical appointments, and social commitments., • Complete all necessary documentation while on shift to include, but not limited to behavior plans, individual's goals, financial records, communication log, nursing log, incident reports and medication Kardex., • Maintain records of supported individual(s) care, conditions, progress, or problems to report and discuss observations with manager/supervisor and clinical., • Provide necessary support/ treatment and documentation for unusual incidents., • Ensure confidentiality of individuals supported and the agency., • Maintain positive and diplomatic relationships with families, advocates and friends of the individuals supported by the agency., • Accompany supported individual(s) to doctors’ offices and/or on other trips outside the home, providing transportation, assistance, and companionship., • Responsibly manage and record house petty cash and the funds of each supported individual according to agency policy., • Work cooperatively and professionally with coworkers, residential support managers administrative personnel, clinical and community providers., • Read all daily communications, keep updated on relevant issues and communicate problems/ concerns involving individuals supported in the program to the support manager., • Throughout employment successfully meet and maintain the requirements of all certifications and training as established by regulatory bodies and the agency’s policies and procedures., • Demonstrate knowledge of emergency procedures and respond appropriately as needed., • Attend and participate in required staff meetings., • Provide emergency coverage as needed., • Perform other related duties as requested. Required Skills/Abilities: • Strong customer service orientation., • Experience working with people who are intellectually/developmentally disabled preferred., • Understanding of basic concepts of personal care, housekeeping and other care areas., • Current driver's license required., • High school diploma or equivalent required., • Prolonged periods of standing, sitting, walking., • Ability to bend, push, pull and lift., • Must be able to lift up to 50 pounds at times. Note: The elements listed above are intended only as illustrations of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar, related, or logical assignment to the position.

Job Description Location: Manchester, CT Schedule: Saturday: 2p - 10p Hours: 8 hrs/wk OPENINGS Olcott MondayTuesdayWednesdayThursdayFridaySaturdaySundayTotal HoursSchedule 2p - 10p 8 Job Summary: The Direct Support Professional (DSP)will provide individualized support to individuals(s) with intellectual disabilities. The DSP must be able to effectively work with or without direct supervision, work cooperatively within a team setting, handle crisis situations calmly and professionally and interact with others in a courteous and professional manner. The DSP must also be able to adapt to the flexible nature of the job and work in a busy and fast paced environment. Supervisor: • Provide daily instruction and assistance in accordance with each person’s individual need, including, but not limited to:, • Meal planning and preparation/menus and dietary guidelines followed., • Leisure time planning and development of hobbies., • Medication administration., • Money management and making purchases of personal items., • Transportation., • Home maintenance., • Personal hygiene., • Personal appointments, medical appointments, and social commitments., • Complete all necessary documentation while on shift to include, but not limited to behavior plans, individual's goals, financial records, communication log, nursing log, incident reports and medication Kardex., • Maintain records of supported individual(s) care, conditions, progress, or problems to report and discuss observations with manager/supervisor and clinical., • Provide necessary support/ treatment and documentation for unusual incidents., • Ensure confidentiality of individuals supported and the agency., • Maintain positive and diplomatic relationships with families, advocates and friends of the individuals supported by the agency., • Accompany supported individual(s) to doctors’ offices and/or on other trips outside the home, providing transportation, assistance, and companionship., • Responsibly manage and record house petty cash and the funds of each supported individual according to agency policy., • Work cooperatively and professionally with coworkers, residential support managers administrative personnel, clinical and community providers., • Read all daily communications, keep updated on relevant issues and communicate problems/ concerns involving individuals supported in the program to the support manager., • Throughout employment successfully meet and maintain the requirements of all certifications and training as established by regulatory bodies and the agency’s policies and procedures., • Demonstrate knowledge of emergency procedures and respond appropriately as needed., • Attend and participate in required staff meetings., • Provide emergency coverage as needed., • Perform other related duties as requested. Required Skills/Abilities: • Strong customer service orientation., • Experience working with people who are intellectually/developmentally disabled preferred., • Understanding of basic concepts of personal care, housekeeping and other care areas., • Current driver's license required., • High school diploma or equivalent required., • Prolonged periods of standing, sitting, walking., • Ability to bend, push, pull and lift., • Must be able to lift up to 50 pounds at times. Note: The elements listed above are intended only as illustrations of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar, related, or logical assignment to the position.

Job DescriptionLocation: Windsor, CT Schedule: Saturday, Sunday: 9a - 3p Hours: 12 hrs/wk OPENINGS Millbrook MondayTuesdayWednesdayThursdayFridaySaturdaySundayTotal HoursSchedule 9a - 3p9a - 3p12 Job Summary: The Direct Support Professional (DSP)will provide individualized support to individuals(s) with intellectual disabilities. The DSP must be able to effectively work with or without direct supervision, work cooperatively within a team setting, handle crisis situations calmly and professionally and interact with others in a courteous and professional manner. The DSP must also be able to adapt to the flexible nature of the job and work in a busy and fast paced environment. Supervisor: • Provide daily instruction and assistance in accordance with each person’s individual need, including, but not limited to:, • Meal planning and preparation/menus and dietary guidelines followed., • Leisure time planning and development of hobbies., • Medication administration., • Money management and making purchases of personal items., • Transportation., • Home maintenance., • Personal hygiene., • Personal appointments, medical appointments, and social commitments., • Complete all necessary documentation while on shift to include, but not limited to behavior plans, individual's goals, financial records, communication log, nursing log, incident reports and medication Kardex., • Maintain records of supported individual(s) care, conditions, progress, or problems to report and discuss observations with manager/supervisor and clinical., • Provide necessary support/ treatment and documentation for unusual incidents., • Ensure confidentiality of individuals supported and the agency., • Maintain positive and diplomatic relationships with families, advocates and friends of the individuals supported by the agency., • Accompany supported individual(s) to doctors’ offices and/or on other trips outside the home, providing transportation, assistance, and companionship., • Responsibly manage and record house petty cash and the funds of each supported individual according to agency policy., • Work cooperatively and professionally with coworkers, residential support managers administrative personnel, clinical and community providers., • Read all daily communications, keep updated on relevant issues and communicate problems/ concerns involving individuals supported in the program to the support manager., • Throughout employment successfully meet and maintain the requirements of all certifications and training as established by regulatory bodies and the agency’s policies and procedures., • Demonstrate knowledge of emergency procedures and respond appropriately as needed., • Attend and participate in required staff meetings., • Provide emergency coverage as needed., • Perform other related duties as requested. Required Skills/Abilities: • Strong customer service orientation., • Experience working with people who are intellectually/developmentally disabled preferred., • Understanding of basic concepts of personal care, housekeeping and other care areas., • Current driver's license required., • High school diploma or equivalent required., • Prolonged periods of standing, sitting, walking., • Ability to bend, push, pull and lift., • Must be able to lift up to 50 pounds at times. Note: The elements listed above are intended only as illustrations of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar, related, or logical assignment to the position.

Job DescriptionJob description Primary Purpose: To provide direct care in a residential setting to participants with intellectual and developmental disabilities who live in their own homes or apartments. To assist with providing engagement in their community and enabling their highest quality of life regarding their physical, emotional, and mental health. We know that every human being is unique, and we offer services that are tailored on a continuum of providing basic needs through the Fulfillment of dreams. Pay Rate: $19.38 per hour Job Types: Full-time, Part-time Expected hours: 10 – 40 per week Days/Hours: Flexible schedule based on position requirements. Weekends and afternoons may be required depending on individual needs. Schedules Available: • 4 hour shift, • 8 hour shift, • Morning shift, • Day shift, • Evening shift, • Third Shift, • Holidays, • Monday to Friday, • Every weekend, • Rotating weekends, • Only Weekends, • Provides essential physical and emotional care to participants, including,, • Providing education and modeling to participants in personal hygiene, activities of daily living, and behavioral conduct while acting as a role model to enhance participants’ self-esteem., • Coordinating and leading social and recreational activities, assisting the individual with shopping for food and clothing, and ensuring the safe transportation of participants., • Provide transportation to individuals for medical appointments, errands, activities, etc., • Completing/Assisting the participant with budgeting, general housekeeping, and household management., • Work with the individual to increase knowledge and understanding of enabling technology and digital literacy to help increase independence., • Nutritional support: assisting the participant in weekly meal planning/preparation., • Health/Wellness: assist the individual in attending their medical appointments as needed and communicating the results of those appointments with the Program supervisor., • Provide effective, respectful, appropriate, and courteous verbal and written communications,, • To and from specific teams related to the care of participants, including observations and reports of any physical or behavioral changes while adhering to all documentation and record-keeping requirements., • With family members, guardians, DDS, and external healthcare providers, including coordinating health and hygiene-related appointments., • · Demonstrates knowledge of emergency procedures and responds appropriately to emergency situations., • · Responsibly manages and records the use of everyone’s money according to the policies established by the CCARC, Inc. Board of Directors., • Collaborating to resolve conflicts, obstacles, and challenges, seeking guidance from manager and team members, as needed., • Demonstrates adherence to universal precautions, OSHA standards and infection control policies and procedures always, as well as department, program, and shift procedures. Technology Requirements: • Computer literate and proficient in Microsoft Office Word and Excel, Outlook, and be comfortable, • using tablets, smartphones, and other general office equipment., • The ability to work with and understand databases is a must, as is the ability to learn technical skills., • Ability to work with and learn various assistive and enabling technology individual's independence., • High School Diploma / GED, • Must have valid Driver's License. Individual Home Support employees are required to have a vehicle for, • use and maintain adequate insurance. Mileage is reimbursed., • Must complete the Agency’s Employee Training, • Certification and training, including but not limited to: CPR, First Aid, PMT (Psychological/Physical, • Management Training) and DDS Medication Administration, • Persons in this job must possess the physical and emotional health needed for effective and efficient, • completion of duties, • Individuals in this job are likely to be required to perform lifting and transferring activities and may be, • 401K, • 401K Employer match of 4 %after 1yr and /1000 hours of service, • PTO accrual, • Medical, • Dental, • Free Vision, • Free Basic Life, • Flexible schedule, • Mileage reimbursement, • Paid orientation, • Paid time off, • New Britain, CT: Relocate before starting work (Required)

Job Description Location: Manchester, CT Schedule: Sunday: 9:30p - 9:30a Hours: 12 hrs/wk OPENINGS Olcott MondayTuesdayWednesdayThursdayFridaySaturdaySundayTotal HoursSchedule 9:30p - 9:30a12 Job Summary: The Direct Support Professional (DSP)will provide individualized support to individuals(s) with intellectual disabilities. The DSP must be able to effectively work with or without direct supervision, work cooperatively within a team setting, handle crisis situations calmly and professionally and interact with others in a courteous and professional manner. The DSP must also be able to adapt to the flexible nature of the job and work in a busy and fast paced environment. Supervisor: • Provide daily instruction and assistance in accordance with each person’s individual need, including, but not limited to:, • Meal planning and preparation/menus and dietary guidelines followed., • Leisure time planning and development of hobbies., • Medication administration., • Money management and making purchases of personal items., • Transportation., • Home maintenance., • Personal hygiene., • Personal appointments, medical appointments, and social commitments., • Complete all necessary documentation while on shift to include, but not limited to behavior plans, individual's goals, financial records, communication log, nursing log, incident reports and medication Kardex., • Maintain records of supported individual(s) care, conditions, progress, or problems to report and discuss observations with manager/supervisor and clinical., • Provide necessary support/ treatment and documentation for unusual incidents., • Ensure confidentiality of individuals supported and the agency., • Maintain positive and diplomatic relationships with families, advocates and friends of the individuals supported by the agency., • Accompany supported individual(s) to doctors’ offices and/or on other trips outside the home, providing transportation, assistance, and companionship., • Responsibly manage and record house petty cash and the funds of each supported individual according to agency policy., • Work cooperatively and professionally with coworkers, residential support managers administrative personnel, clinical and community providers., • Read all daily communications, keep updated on relevant issues and communicate problems/ concerns involving individuals supported in the program to the support manager., • Throughout employment successfully meet and maintain the requirements of all certifications and training as established by regulatory bodies and the agency’s policies and procedures., • Demonstrate knowledge of emergency procedures and respond appropriately as needed., • Attend and participate in required staff meetings., • Provide emergency coverage as needed., • Perform other related duties as requested. Required Skills/Abilities: • Strong customer service orientation., • Experience working with people who are intellectually/developmentally disabled preferred., • Understanding of basic concepts of personal care, housekeeping and other care areas., • Current driver's license required., • High school diploma or equivalent required., • Prolonged periods of standing, sitting, walking., • Ability to bend, push, pull and lift., • Must be able to lift up to 50 pounds at times. Note: The elements listed above are intended only as illustrations of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar, related, or logical assignment to the position.

Job DescriptionLocation: Manchester, CT Schedule: Saturday, Sunday: 7a - 3p Hours: 16 hrs/wk Job Summary: The Direct Support Professional (DSP)will provide individualized support to individuals(s) with intellectual disabilities. The DSP must be able to effectively work with or without direct supervision, work cooperatively within a team setting, handle crisis situations calmly and professionally and interact with others in a courteous and professional manner. The DSP must also be able to adapt to the flexible nature of the job and work in a busy and fast paced environment. Supervisor: • Provide daily instruction and assistance in accordance with each person’s individual need, including, but not limited to:, • Meal planning and preparation/menus and dietary guidelines followed., • Leisure time planning and development of hobbies., • Medication administration., • Money management and making purchases of personal items., • Transportation., • Home maintenance., • Personal hygiene., • Personal appointments, medical appointments, and social commitments., • Complete all necessary documentation while on shift to include, but not limited to behavior plans, individual's goals, financial records, communication log, nursing log, incident reports and medication Kardex., • Maintain records of supported individual(s) care, conditions, progress, or problems to report and discuss observations with manager/supervisor and clinical., • Provide necessary support/ treatment and documentation for unusual incidents., • Ensure confidentiality of individuals supported and the agency., • Maintain positive and diplomatic relationships with families, advocates and friends of the individuals supported by the agency., • Accompany supported individual(s) to doctors’ offices and/or on other trips outside the home, providing transportation, assistance, and companionship., • Responsibly manage and record house petty cash and the funds of each supported individual according to agency policy., • Work cooperatively and professionally with coworkers, residential support managers administrative personnel, clinical and community providers., • Read all daily communications, keep updated on relevant issues and communicate problems/ concerns involving individuals supported in the program to the support manager., • Throughout employment successfully meet and maintain the requirements of all certifications and training as established by regulatory bodies and the agency’s policies and procedures., • Demonstrate knowledge of emergency procedures and respond appropriately as needed., • Attend and participate in required staff meetings., • Provide emergency coverage as needed., • Perform other related duties as requested. Required Skills/Abilities: • Strong customer service orientation., • Experience working with people who are intellectually/developmentally disabled preferred., • Understanding of basic concepts of personal care, housekeeping and other care areas., • Current driver's license required., • High school diploma or equivalent required., • Prolonged periods of standing, sitting, walking., • Ability to bend, push, pull and lift., • Must be able to lift up to 50 pounds at times. Note: The elements listed above are intended only as illustrations of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar, related, or logical assignment to the position.

Job Description JOB DESCRIPTION POSITION TITLE: Case Manager- Level 1 DEPARTMENT: All Departments (non-clinical) FLSA STATUS: Non-Exempt REPORTS TO: Senior Case Manager – Level 2 GENERAL DESCRIPTION OF DUTIES The purpose of this position is to support the Agency’s needs by providing support based on CRT’s Steps to Success model, the Case Manager is responsible for the coordination of supervision, intake, referral and discharge of customers. Daily monitoring of customer contacts and activities is a primary responsibility. The Case Manager conducts assessments of customer needs and coordinates referrals to Community Renewal Team programs and initiatives, as well as to other community resources. SPECIFIC DUTIES AND RESPONSIBILITIES ESSENTIAL JOB FUNCTIONS The list of essential functions, as outlined herein, is intended to be representative of the tasks performed within this classification. It is not necessarily descriptive of any one position in the class. The omission of an essential function does not preclude management from assigning duties not listed herein if such functions are a logical assignment to the position. • Complete Intake Application on customer within STEPS System, • Interview customers on and/or off site as required. · Coordinate customer referrals with social service system and other community support services. · Monitor and document customer progress and adherence to Individualized Program including daily case file entries and/or possibly urinalysis collection if applicable. · Provide reports to referring agencies including, but not limited to, progress reports, discharge summaries, aftercare plans and special reports. · Provide individual counseling and facilitate groups. · Provide community service work crew supervision if applicable. · Ensure all intake information is, if required by program, accurately entered into STEPS and/or other systems as required. · Collects demographic data, conducts pre-screening and assesses potential eligibility for CRT, DSS or other community-based resources. · Facilitates information and referral services and documents outcomes resulting from such referrals. · Facilitates customer access to community resources, including, but not limited to food, housing, clothing, school programs, vocational opportunities or services, life skills training and relevant mental health services. · Maintains a caseload of customers in need of intensive case management or multiple service needs. · Follow-up every 3 months or as needed. · Maintain customer file and information according to standard. · Conducts home visits as needed. ADDITIONAL JOB FUNCTIONS • Perform all duties relative to special programs/projects as required., • Provide input and make recommendations regarding program/departmental policies, procedures, and practices., • Reports to and conducts additional duties as required by various funder guidelines and requirements., • Filing, copying, scheduling appointments, answering phone calls, and returning calls. · Schedule may be changed at any time to accommodate program needs. • Performs all other duties as assigned. MINIMUM TRAINING EXPERIENCE and health certifications Education: associate or bachelor’s degree in the Human Services field from an accredited college or university preferred. Education may be substituted with experience on a year-by-year basis with responsible employment experience. Minimum Years of Experience: three to five (3 to 5) years in Criminal Justice, Social Work, or related field preferred Active Certification: Specialized training with HIV/AIDS, Drug and Alcohol Abuse and/or counseling, Domestic Violence and/or any other applicable training related to field of work. Intake and eligibility certification for all CRT programs including VITA, Energy Assistance, Early Care and Education, Eviction and Foreclosure Prevention and other CRT programs. Complete yearly mandatory training including confidentiality and HIPAA compliance. Conducts home visits. Content knowledge in employment education, financial literacy, prevention/ wellness education and housing. Knowledge of: Human Services programs; Outside Community-based resources for basic needs, Criminal Justice and the Court systems is preferred. Knowledge of substance abuse and target population helpful. Counseling background preferred. Ability to interact with people of diverse backgrounds required. Demonstrate skills in: Ability to work with individuals from diverse racial/ethnic and economic backgrounds; Ability to maintain accurate and timely records; Strong Organizational Skills including the ability to handle multiple projects, write concise reports, plans, and correspondence; Solid Listening, verbal/written Communication, and Customer Service Skills; Ability to communicate effectively. Ability to compile written reports and maintain case notes; Proficiency in computer technology, software databases, Microsoft Office Suites are all required. Bilingual: English/Spanish verbal & written - preferred. Driving Required YES Agency Vehicle YES Employee’s Own Vehicle YES Active Driver License in good standing required upon hire and throughout employment. ADA COMPLIANCE Physical Ability: Tasks involve sedentary to light work, involving some reaching, handling, fingering and/or feeling of objects and materials. Sensory Requirements: Some tasks require visual perception and discrimination. Some tasks require oral communications ability. Environmental Factors: Tasks are regularly performed without exposure to adverse environmental conditions, such as dirt, dust, pollen, odors, wetness, humidity, rain, fumes, temperature and noise extremes, machinery, vibrations, electric currents, traffic hazards, animals/wildlife, toxic/poisonous agents, violence, disease, or pathogenic substances. M-F 8a-4p

Job Description Overview Since inception in 2004, BI Incorporated has operated ISAP for the Department of Homeland Security (DHS) and U.S. Immigration and Customs Enforcement (ICE) and Enforcement and Removal Operations (ERO). ISAP is an essential part of ERO, providing intensive supervision of individuals in immigration proceedings. The program achieves positive results by combining comprehensive case management with proven supervision technology. In addition, BI maintains an extensive list of community-based partners to provide critical assistance for participants' basic life needs. With consistent positive outcomes, ISAP continues to grow and evolve, serving an ever-increasing number of participants. Responsibilities Summary Provides case management of Intensive Supervision Appearance Program (ISAP) participants from entry to release by administering the program’s policies and procedures as defined by the Department of Homeland Security (DHS) contract. Primary Duties and Responsibilities • Develops, implements, coordinates, reviews and updates case management and individual service plans for ISAP participants in conformance with state and federal regulations and program requirements. Meets with participants face-to-face regularly as required by contractual obligations., • Develops and maintains accurate and complete case records for all ISAP participants from entry to release from ISAP. Proactively manages cases using all appropriate tools and techniques. Maintains confidentiality of all records., • Conducts intake interview and orientation session with each ISAP participant within contractual timeframes and requirements., • Installs electronic monitoring equipment on ISAP participants as necessary and monitors compliance with electronic monitoring program., • Assists ISAP participants with acquiring travel documents from the countries of citizenship. Maintains a log of travel document information for each participant., • Evaluates English proficiency of ISAP participants to determine resources necessary to promote clear communication between ISAP staff and participants., • Coordinates and facilitates translation services for ISAP participants, including emergency translation services., • Connects participants with community resources including, but not limited to, transportation, medical, food, shelter, clothing, educational, financial, legal, religious and other social adjustment or facilitative resources. Identifies and coordinates services as required., • Supervises ISAP participants while in Company offices., • Establishes schedules for ISAP participants that include, but are not limited to, counseling sessions, immigration Court appearances, and access to legal services., • Coordinates with participants to ensure attendance at legal orientation and cultural orientation sessions, as well as supplemental services evaluations., • Reviews individual service plans, conducts risk/needs assessments and writes progress reports on a regular basis in compliance with contractual obligations., • Reports on program violations in a timely manner using established reporting parameters., • Conducts home visits to verify participants’ places of residence in compliance with contractual obligations., • Performs emergency counseling for ISAP participants as needed., • Identifies and maintains relationships with translation resources in the community, including private services, volunteers, universities, English as a Second Language (ESL) schools, NGOs, churches, and other organizations that might have resources to offer., • Performs other duties as assigned. Qualifications Minimum Requirements • Bachelor’s Degree required. Degree in Sociology, Psychology, Social Work, Criminal Justice or related field preferred., • At least two years of customer service or case management experience required; experience in fields related to law, social work, detention, corrections or working with multi-cultural clients preferred., • Bilingual Spanish required., • Valid driver’s license required and the ability to safely operate a motor vehicle in order to perform home visits., • US citizenship required., • Ability to receive client’s approval to work on contract required., • Must live in the US 3 of the last 5 years (military and study abroad included)., • Effective verbal and written communication skills with employees, community contacts, government officials and participants. Ability to interpret and articulate rules, orders, instructions and materials. Ability to compose reports., • Demonstrated sound judgment and even temperament. Ability to maintain self-control in stressful situations, such as interpersonal confrontations or emergencies. Ability to defuse hostile or unstable situations., • Ability to deal tactfully with the public., • Attention to detail., • Problem solving ability., • Ability to deal with multicultural contacts with sensitivity., • Basic knowledge of immigration laws, regulations and procedures., • Basic computer skills., • Ability to interpret electronic monitoring messages and daily summary reports., • Good typing skills to develop and maintain case records by performing data entry., • Typical office environment., • Some local travel is required., • Use of standard office equipment such as copier, computer, keyboard, telephone and fax machine., • Bending, stooping and use of hands and fingers to place electronic monitoring equipment on participants., • Ability to use hands and fingers to install electronic monitoring equipment and to perform data entry., • Ability to stand, walk, sit, climb or balance, enter and exit a car, and climb stairs multiple times in one day in order to make home visits.

Job DescriptionPosition: CNC Repair Technician Employee Type: Full-Time (1st & 2nd shift) This positions responsibility includes trouble shooting, and repairing CNC machinery and components. Which consist of electrical and mechanical components of the CNC equipment. Typical equipment consists of 3,4,5 Axis Mills. Vertical and horizontal turning machines. Other occasional building maintenance may be required. Responsibilities: • Preventive Maintenance (PM) and Total Productive Maintenance (TPM) as required, • Troubleshooting production equipment failures and malfunctions, • Testing and aiding in the implementation of equipment & equipment moves, • Repairing Hydraulic systems, • Occasional welding/sheet metal fabrication, • Basic electrical repair, • Computer skills, placing POs for components and parts, • Good housekeeping practices is a must, • Knowledge of appropriate PPE and work practices to limit exposure to injury risks, • Operating forklift, and man lifts, • Other duties as requested from supervisorQualifications:, • 3+ years of experience troubleshooting and repairing basic hydraulic, pneumatic, mechanics and electrical CNC components., • Basic knowledge of CNC machines: spindles, ball screws, bearing, guilds, scales., • Understanding of OSHA safety standards, such as Lock out/Tag out, Hazards waste spill/clean up, • Capable of using standard repair tools, such as multi meters, welders, standard hand tools., • Basic Ability to read and interpret machine manuals and documentation.Physical Demands:, • Regularly required to sit, stand, reach, bend., • Ability to stand, walk, push, pull, reach overhead and bend to the floor., • Occasionally exert up to 50 pounds of force., • Frequently exert up to 25 pounds of force., • Frequently exert up to 10 pounds of force., • Comprehensive medical insurance plans including dental and vision, • Company paid insurance packages: life insurance, short-term disability, and long term disability, • 401k and HRA Funding, • Company paid apparel with dry cleaning, • Safety shoe vouchers, • Paid time off, paid holidays and paid floating holidays to accommodate our diverse work environment, • Employee Assistance Program, • Tuition reimbursement, • Continued education and professional development, • Company paid job training, • Family leave, • Employee discounts, • On-site Micro Market, • Company family picnic and holiday parties ABOUT US: Polamer Precision Inc., is a global aerospace manufacturing company specializing in complex aerospace engine components for demanding applications. We collaborate with clients to solve challenges in engineering and production. Polamer Precision's approach to aerospace manufacturing is vastly different than other sub-primes in the aerospace industry. We are a positive, forward-looking company with the future on our collective minds. Polamer Precision's efforts present a paradigm shift in terms of what can be accomplished with manufacturing in the United States. Our ability to maximize technological assets while empowering people with the latest tools enables us to compete on a global scale. Whether installing a megawatt solar array or acquiring the latest cutting-edge technology, we strive to improve every aspect of aerospace manufacturing on a daily basis. Innovation and dedication to new technology has resulted in a proven track record of surpassing expectations while consistently setting the bar for what can be accomplished in lean manufacturing. Our relentless pursuit to innovate is at the core of our principles. We have had unprecedented growth year after year with a current employee count of over 190+ and almost a billion-dollar backlog of business. TO LEARN MORE ABOUT POLAMER PRECISION, INC. PLEASE VISIT: The above statements are intended to describe the general nature and level of work being performed by the individual(s) assigned to this position. Management reserves the right to modify, add, or remove duties and to assign other duties as necessary. They are not intended to be an exhaustive list of all duties, responsibilities, and skills required. Polamer Precision, Inc. is proud to be an Equal Opportunity/Affirmative Action Employer M/F/D/V. We maintain a drug-free workplace and perform pre-employment substance abuse testing. Powered by JazzHR ZGwYOgaBz5

Job Description Organization: Harc, Inc. Location: Greater Hartford, CT (On-site) Salary: $75-$90K Work Schedule: Full-time (occasional evenings, weekends, and holidays) FLSA Status: Exempt Reports to: Director of Nursing Harc is a leading nonprofit organization dedicated to providing lifelong support for individuals with intellectual and developmental disabilities (I/DD) and their families. Established in 1951, Harc offers a range of services including employment, enrichment, residential supports, and advocacy. Our mission is to ensure lives of quality, inclusion, and dignity. Position Summary: We are seeking a detail-oriented and experienced Registered Nurse to coordinate and monitor healthcare services for individuals with intellectual and/or developmental disabilities living in Harc’s group homes and/or participating in Harc’s day programs. The ideal candidate will be well-versed in best practices for documentation and compliance and DDS policies and procedures, and will bring a commitment to accuracy, confidentiality, and timeliness. This position plays a critical role in ensuring the health and safety of the individuals we serve while collaborating closely with the staff in the programs, families and the care teams associated with the individuals. Key Responsibilities: • Coordinate health care services based on needs for the individual under the direction of DDS regulations and policies., • Creates and coordinates comprehensive individualized nursing care plans for individuals., • Advocates and educates those under their care and their families and staff., • Completion of medical documentation, including but not limited to, Nursing Assessments, Self-Medication Assessments, referrals for consultation, Nursing Quarterly Audits, and Medication Administration oversight., • Directly manage medical services provided to participants in Harc’s programs., • Conducts training for staff in health-related topics at New Employee Orientation, annual training courses and as necessary., • Delegates initial and annual nursing procedures to staff and determines if further training or re-delegation is needed., • Observes medication certified staff during medication passes., • Provides direct hands-on clinical support and assessments as necessary within DDS regulations while adhering to Nursing Best Practices and Standards of Care., • Completes medication audits per DDS regulations., • Updates medical plans and protocols as necessary including fall risk assessments plans for participants as required by DDS annually., • Functions as an endorsed medication administration instructor for Harc and teaches the Medication Certification course. Retrains staff who have failed the re-certification process and sanctions staff with multiple errors. Key Competencies: Technical Competencies: • Proficiency in using technology for healthcare documentation and communication., • Knowledge and understanding of DDS regulations and policies including DDS Medication Administration policies and procedures, • Ability to complete and maintain required documentation and assure adherence to both best practices and compliance requirements, • Proficiency in writing and following Nursing Assessments, Self-Medication Assessments, referrals for consultation, Nursing Quarterly Audits, and Medication Administration oversight., • Clear communication with other nurses, doctors, families, and staff, • Ability to communicate with individuals with intellectual and developmental disabilities, • Ability to explain complex medical issues in simple terms, • Discretion when handling sensitive information, • Ability to work independently and as part of a team, • Ability to spot and correct medication errors, • Managing and deadlines and the needs of the individuals, • Prioritizing tasks in a high-volume environment, • Maintaining strict confidentiality of individuals’ information and adherence to HIPAA Education: • Current RN license in the State of Connecticut (required)., • Associate's degree in nursing, • Minimum of 2 years of professional nursing experience, • Experience working with individuals with I/DD or other vulnerable populations is highly preferred., • Familiarity with EHR systems, • Understanding of DDS compliance requirements and DDS policies and procedures. Skills & Abilities: • Expertise in clinical care, medication administration, and health training., • Proficiency in using technology for healthcare documentation and communication., • Ability to lift and transfer individuals as needed, • Valid driver’s license and reliable vehicle to travel and complete work assignments in residential locations, • Proficiency in Excel and other Microsoft Office applications., • High attention to detail and ability to work under tight deadlines., • Strong interpersonal and communication skills., • The role requires flexibility to work in a variety of environments, including office settings, residential group homes, and community-based programs. The Registered Nurse must be comfortable traveling between locations and engaging with participants, families, and staff on-site. Benefits: • Generous paid time off, plus 11 paid holidays, • Affordable medical, dental, and vision benefits (Harc, Inc. covers up to 94% of a single person’s health insurance premium), • 401(k) retirement plan with a 9.5% employer contribution, • Employer-paid life insurance options, • Professional development opportunities, including tuition reimbursement, • Staff recognition and appreciation programs, • Harc, Inc. employees qualify for Public Service Loan Forgiveness (PSLF) Harc, Inc. is an Equal Opportunity Employer. We encourage applications from all qualified individuals, regardless of race, color, religion, gender, gender identity or expression, sexual orientation, age, disability, or veteran status.

Job Description Position: Quality Inspector Employee Type: Full-Time (1st & 2nd shift) Quality Inspector will be responsible to ensure that aerospace parts are inspected per drawing specifications with highest standards. Polamer Precision is seeking a highly motivated and detail-oriented person with strong understanding of blueprint and experience with inspection methods. Experience in Aerospace Manufacturing. QUALIFICATIONS / RESPONSIBILITIES: • Professional use of general and precision measurement equipment, • Ability to read Blueprints, • Attention to details, • Strong work ethic and Positive attitude, • Working Knowledge of Tight tolerance, • Good Communication and self-disciplined, • Perform assigned inspection on 1st piece, in process, receiving, first article and finished product, • Strong visual inspection skills, • Knowledge of Quality Management Standards such as ISO 9001 and AS 9100, • Knowledge of Geometric Dimensioning & Tolerance (GD&T), • Continuous Improvement Techniques, • Sampling (AQL levels, sampling tables), • Proficiency with computer-based applications (Newest Technology /Cloud ERP system training will be provided), • Fluent English reading, writing and verbal communication, • Ability to comprehend and apply advanced mathematics, • Ability to apply principles of logical or scientific thinking to resolve practical problems, • Review and Disposition on all certification documentation to meet customer requirements, • Disposition and control on non-conforming product, • Performs duties as requested, directed or assigned by supervisor, • Previous aerospace inspection experience at least 4 years, • Strong analytical, organizational and troubleshooting skills, • Comprehensive medical insurance plans including dental and vision, • Company paid insurance packages: life insurance, short-term disability, and long term disability, • 401k and HRA Funding, • Company paid apparel with dry cleaning, • Safety shoe vouchers, • Paid time off, paid holidays and paid floating holidays to accommodate our diverse work environment, • Employee Assistance Program, • Tuition reimbursement, • Continued education and professional development, • Company paid job training, • Family leave, • Employee discounts, • On-site Micro Market TO LEARN MORE ABOUT POLAMER PRECISION, INC. PLEASE VISIT: The above statements are intended to describe the general nature and level of work being performed by the individual(s) assigned to this position. Management reserves the right to modify, add, or remove duties and to assign other duties as necessary. They are not intended to be an exhaustive list of all duties, responsibilities, and skills required. Polamer Precision, Inc is proud to be an Equal Opportunity/Affirmative Action Employer M/F/D/V. We maintain a drug-free workplace and perform pre-employment substance abuse testing. Powered by JazzHR NkqKIM1Qxw

Job DescriptionPosition: Emergency Recovery Coordinator (ERC) Reports To: General Manager or Owner What does an ERC with Paul Davis do? • Serve your community when it needs it the most, • Generate revenue opportunities by directly consulting with property owners impacted by fire, water damage, or other large-scale emergency events, • Cooperate with public emergency response agencies and private entities, • Create and retain customer loyalty and preference by establishing a positive and trusting relationship with the customer, • Participate in restoration related community awareness events and programs, • Ongoing Leadership Development Program and industry events, • One on One mentorship, • Three months of structured training to learn the Paul Davis Way, • Access to Paul Davis University and regular training opportunities, • Cell phone and computer provided by the company, • Company vehicle and gas reimbursement, • PTO and sick days with a flexible schedule, • Base + commission. Our current ERCs yearly pay range from $52,000 to $100,000+ depending on their production. No limit to earning potential.Team Qualifications (Requirements):, • Ability to clearly deliver truth and give certainty when property owners need it most, • Proficient with a variety of current technology, • Career emphasis on learning and continuing education, • Sound planning and organizational skills, • Excellent communication and presentation skills, • Valid Drivers license and satisfactory driving record required, • Relevant experienceRole on the Team (Job Functions):, • Be familiar with assigned territory, • Responsible for educating the customer on products or services and effectively articulate the use and need, • Monitors interprets and responds to lead sources, • Establish and maintain positive relationships in the local community, • Volunteer non-operational time to related community events, • On-call 24/7 to include weekends and holidays as scheduled, • Marketing, • Achieve and remain current in required certifications, • Provide emergency recovery kits and services to the impacted property owner, • Support franchisee and franchisor organizational mission, vision, and value statementSkills Desired of Team Member:, • Self-motivated to get results, • Loves working people in need of assistance, • Is organized, but flexible. Must be able to prioritize and manage time, • Excellent communication skills, • Thrives under high-stress situations, • Enjoys working hard in a fast-paced, dynamic environment

Job Description Lia Hyundai Hartford is seeking an A/A+ level Automotive Technician to join our team. If you're an experienced technician looking for a fast-paced, professional, and positive environment that rewards hard-working, reliable, and team-oriented individuals, this is the right place for you! Lia service departments are equipped with the latest technologies & equipment including service drive alignment checker, alignment rack, and Hunter tire mounting and balancing machines. COMPENSATION RANGE: $60K-$125K+ SIGN ON BONUS: N/A REQUIREMENTS: • 3+ years of Service Technician experience required, • Any Hyundai training or certification preferred, • Diagnostic, Electrical, and Engine Repair experience required, • State Inspection certification required, • ASE Certification recommended, • Able to operate electronic diagnostic equipment, • Ability to learn new technology, repair, and service procedures and specifications, • Computer skills, • Ability to work in a fast-paced environment, • Perform work specified on the repair order with efficiency and in accordance with dealership processes, • Test-drive vehicles, and test components and systems using diagnostic tools and special service equipment, • Diagnosing, maintaining, and repairing vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc., • Communicate directly with the Service Advisor so that customers can be informed if any additional service is needed, providing an estimate of the time needed for additional repairs., • Medical, Dental and Vision, • 401K Plan with Employer Match, • ASE and state inspection certification reimbursement and all training expenses paid to further your career, • Continued education, manufacturer hands-on and web-based training, • Paid Time Off, • Paid Weekly, • An employer funded Life Insurance Plan, • Discounts on services and parts, • Employee vehicle purchase plans The Lia Auto Group is one of the top 100 automotive groups in the country, established in 1977 by Bill Lia Sr. The group consists of 21 dealerships throughout New York, Connecticut, and Massachusetts, offering a variety of manufacturers including Honda, Toyota, Hyundai, Nissan, Infiniti, Volkswagen, and Chrysler Jeep Dodge Ram (CJDR). Lia also provides rental and full-body repair services at the Lia Collision Center in Colonie, NY. The Lia Group Companies has since grown to include Vent Fitness, Lia Insurance Agency, BurgerFi, and various commercial properties including Hamilton Square shopping center in Guilderland, NY. Our team of over 1,500 dedicated staff members have delivered quality products and exceptional consumer experiences for over 40 years. With a long history of success and continuous expansion, the Lia Auto Group provides ample opportunity for development and growth to current and future employees. We offer competitive wages, generous benefits, and a rewarding, safety-conscious work environment. We seek those who can help us take our growth and service to the next level. COMMUNITY: We are heavily involved in supporting the communities we live in and work in and look for people to join us in volunteerism and fundraising efforts for many local charities and non-profit organizations.

Job Description Position: CNC HTC Machine Operator / Horizontal Lathe Employee Type: Full-Time (2nd shift) Opening for highly motivated and team-oriented CNC HTC Machine Operator. Responsibilities: • Operating HTC (Horizontal Turning Center), setup, inspecting parts to drawings requirements, troubleshooting malfunctions when necessary., • Reporting needed repairs, review setup sheet and specifications to determine setup procedures. Qualifications: • 3+ years’ experience in Aerospace industry., • Operating and set up knowledge of standard CNC controllers; i.e. CNC Lathes., • Must be familiar with machining technology, mechanical principles, and shop mathematics., • FANUC control knowledge is a plus., • Read and understand blueprints a must., • Must have good verbal and written communication skills; must read, write, and speak English., • Overtime may be required per business needs. Other duties assigned by supervisor., • Educational Requirements: High School Diploma or equivalent. Completion of a CNC Program preferred. Work Environment: • While performing the duties for this job, alternating between standing and sitting. Also perform walking, gross manipulation, fine motor manipulation, lifting/carrying, pushing, and pulling., • Must be able to perform repetitive movements daily., • Required to always wear safety shoes and safety glasses when on shop floor, • Possible risk of injury from equipment or sharp parts and may be required to use protective equipment such as gowns and safety goggles., • Assignment may require working on loud and potentially dangerous machinery/materials., • Required to use computer or touch screen to enter work order data., • Comprehensive medical insurance plans including dental and vision, • Company paid insurance packages: life insurance, short-term disability, and long term disability, • 401k and HRA Funding, • Company paid apparel with dry cleaning, • Safety shoe vouchers, • Paid time off, paid holidays and paid floating holidays to accommodate our diverse work environment, • Employee Assistance Program, • Tuition reimbursement, • Continued education and professional development, • Company paid job training, • Family leave, • Employee discounts, • On-site Micro Market Polamer Precision Inc., is a global aerospace manufacturing company specializing in complex aerospace engine components for demanding applications. We collaborate with clients to solve challenges in engineering and production. Polamer Precision's approach to aerospace manufacturing is vastly different than other sub-primes in the aerospace industry. We are a positive, forward-looking company with the future on our collective minds. Polamer Precision's efforts present a paradigm shift in terms of what can be accomplished with manufacturing in the United States. Our ability to maximize technological assets while empowering people with the latest tools enables us to compete on a global scale. Whether installing a megawatt solar array or acquiring the latest cutting-edge technology, we strive to improve every aspect of aerospace manufacturing on a daily basis. Innovation and dedication to new technology has resulted in a proven track record of surpassing expectations while consistently setting the bar for what can be accomplished in lean manufacturing. Our relentless pursuit to innovate is at the core of our principles. We have had unprecedented growth year after year with a current employee count of over 190+ and almost a billion-dollar backlog of business. TO LEARN MORE ABOUT POLAMER PRECISION, INC. PLEASE VISIT: The above statements are intended to describe the general nature and level of work being performed by the individual(s) assigned to this position. Management reserves the right to modify, add, or remove duties and to assign other duties as necessary. They are not intended to be an exhaustive list of all duties, responsibilities, and skills required. Polamer Precision, Inc. is proud to be an Equal Opportunity/Affirmative Action Employer M/F/D/V. We maintain a drug-free workplace and perform pre-employment substance abuse testing. Powered by JazzHR 5RaCZLxyjg

Job Description : KTA-Tator, Inc. (KTA) is a 100% employee-owned materials engineering firm, internationally recognized as a leading expert in corrosion protection and asset integrity. Five business units comprise the $40 million enterprise offering a broad range of coatings, steel, concrete fabrication and building envelope inspection, evaluation, and testing services in nearly every market and industry. KTA is recruiting full-time and part-time Certified Welding Inspectors (CWI) nationwide. All applicants must be willing to travel and work multiple shifts. Education and Experience: • High School Diploma or GED equivalent - required, • Current AWS CWI - required, • Bridge fabrication inspection experience - preferred, • NDT Experience is desirable, • Good oral and written communication skills, • Decision making skills, • Reliable transportation, • Valid driver’s license, • Close, color, distance, depth vision and ability to adjust focus, • Ability to travel extensively and ability to work outside on occasion (including inclement weather), • Climbing, bending, crawling, and working in confined spaces and on uneven terrain, • Excellent work ethic, • Customer oriented, • Ability to meet deadlines, • Detail oriented, • Self-starter, • Works well in a team environment and independently Drug testing and criminal background and motor vehicle check will be conducted. Salary Range: $30-42/hour with comprehensive benefits package. Hourly rate is based on experience and certifications. KTA is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. KTA is a Standing Firm Company. Elzly Technology Corporation (Elzly) is a wholly-owned subsidiary of KTA-Tator, Inc. (KTA). Links: Know Your Rights: Workplace Discrimination is Illegal The Family and Medical Leave Act Pay Transparency Nondiscrimination Provision Notice of E-Verify Participation E-Verify Right to Work We strive to make this site accessible to any and all users. If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our career center and application process as a result of your disability or if you have Equal Employment Opportunity questions. To request an accommodation, please contact us at info@kta. Powered by JazzHR VjF4ciKFGT

Job DescriptionDetails:Posted: 07/18/25 Level: Adjunct Closing Date: The committee will begin reviewing applications immediately. This posting will remain open until filled. Location:Charter Oak State College 185 Main Street New Britain, CT 06051 *This position is remote. Please take a look at our website to find out more about our college. Charter Oak State CollegeCharter Oak State College Mission:As part of the Connecticut State Colleges & Universities (CSCU) system, Charter Oak State College, the state’s only public, online, degree-granting institution, provides affordable, diverse, and alternative opportunities for adults to earn undergraduate and graduate degrees and certificates. The College's mission is to validate learning acquired through traditional and non-traditional experiences, including its own courses. The College rigorously upholds standards of high quality and seeks to inspire adults with the self-enrichment potential of non-traditional higher education.Charter Oak State College Vision:Charter Oak State College: A dynamic community of online learners advancing the nation’s workforce one graduate at a time.Anticipated Start Date: Fall 2025Position Summary: Reporting to the Chair-Business & Technology Department, the Undergraduate Adjunct Faculty members are responsible for teaching the content of the classes and facilitating learning. We have an opening in the following subject area: Undergraduate Business Subjects: • Artificial Intelligence for MarketingNote: All of the courses will entail you either creating the course in the specific subject area in addition and/or teaching the course. Candidates are expected to have excellent oral and written communication skills along with reliable technology and access to high-speed internet.Supervisory and Other Relationships: No supervisory reasonability's. Position Responsibilities: The following examples of duties illustrate the general range of tasks assigned to the position, but are not intended to define the limits of required duties. Other essential duties may be assigned consistent with the general scope of the position. • Complete the Charter Oak Faculty Orientation before being given the first course assignment and contract, • Prior to the course start, complete a quality check/review of each assigned course, • Engage fully with students in assigned course/s. This translates to having active course participation and being responsive (within 2 business days) and supporting their success, • Conduct course/s as designed through the learning management system (Blackboard);, • Proactively reach out to students that miss assignments, • Refer or notify appropriate academic and/or support services such as tutoring or advising as appropriate, • Post weekly course updates and announcements, • Maintain and submit accurate and timely reports for student grades, • Adhere to all Charter Oak State College faculty expectations regarding engagement in the course through the discussion board and personalized/substantive feedback to students on assessments, • Respond promptly to student, Program Director, and college emails, • Maintains current knowledge of professional issuesMinimum Qualifications:Incumbents must possess proven ability to effectively work with a diverse set of faculty, staff, and students. They are expected to have excellent oral and written communication skills along with strong information technology literacy skills. Incumbents are required to have demonstrated advanced knowledge and abilities in the following:, • Master's degree from a regionally accredited institution., • Minimum of three years professional experience in the subject area being instructed, • Demonstrated training or experience in teaching in an online asynchronous environment, • Effective communication skills, • Demonstrated competency in AI computer applications for Marketing., • Excellent organization skills and attention to detail.Preferred Qualifications: Preferred candidates of the position will additionally possess the following:, • Doctoral degree from a regionally accredited institution., • Five years of professional experience including management experience in the subject area being instructed, • At least two (2) years of higher education teaching experience and/or one (1) year of higher education online teaching experience For more information or to apply via our website at Procedure:Application materials will be evaluated by the Chair-Business & Technology Department. Candidates selected for further consideration will be limited to those applicants who are best qualified based on the minimum and preferred qualifications and who have submitted all the required documents. Candidates who have been selected and approved to interview will be contacted. The selection process may also include practical exercises (i.e., teaching demonstration and/or other written, technical, manipulative, or simulation exercises) to evaluate candidates' qualifications.Background Screening:All employment, if offered, is contingent upon proof of citizenship or employability under the requirement of the Immigration and Control Act (IRCA) and the successful passing of a background check, including granting permission to contact current and previous employers for verification. COSC is committed to providing a safe campus community. Background investigations include reference checks, a criminal history record check and, when appropriate, a financial (credit) report or driving history check. Clery Act Attached is Charter Oaks Annual Security Report to comply with the requirement of the Clery Act which outlines several administrative items related to campus security. Continuing Notice of Nondiscrimination COSC does not discriminate on the basis of race, color, religious creed, age, gender, gender identity or expression, national origin, marital status, ancestry, present or past history of mental disorder, learning disability or physical disability, veteran status, sexual orientation, genetic information or criminal record. COSC IS AN EQUAL OPPORTUNITY EMPLOYER. Powered by JazzHR TcifqGq7r3

Job Description Position Title: BMET II Join Intelas, a Compass One Healthcare company. Intelas, a Compass One Healthcare company, delivers smarter asset management by blending expert service teams with intelligent, data-driven strategies that help hospitals improve uptime, simplify oversight, and make more informed capital decisions. Our programs support 100% regulatory compliance and drives 98% equipment uptime—so clinicians can focus on care, not equipment issues. We support nearly 4,500 healthcare sites nationwide—from large, campus-based acute care hospitals to system-integrated outpatient clinics. With more than 1.15 million medical devices managed, we provide the clarity and consistency needed in today’s rapidly evolving healthcare environment. Join Intelas—where your career thrives, your potential is unleashed, and your work directly supports patient care. Whether you're just starting out or are a seasoned professional, our people-first approach ensures opportunities for continuous growth, development, and fulfillment. Explore more at intelashealth.com. Job Summary Key Responsibilities: • Performs planned maintenance and electrical safety inspections on a broad range of patient care and selected support equipment in compliance with established standards., • Manages all assigned equipment and schedules service., • Performs pre-acceptance inspections and develop PM procedures on equipment; maintains files on procedures and manuals., • Ensures test equipment is working properly and calibrated within established intervals., • Responds expeditiously to calls from clinical departments to evaluate and rectify valid operator complaints and concerns., • Researches and initiates orders for repair parts, working within established budget parameters., • Maintains purchase order log and validate invoices for payment (field service personnel only)., • Provides informal training to equipment users and Crothall Services Group staff as requested or when circumstances dictate., • Makes recommendations to the Department Manager regarding service strategies on equipment; keeps supervisor informed of activities, needs and problems., • Participates in the Quality Improvement / Risk Management program by gaining an understanding of the issues and concerns of customers and making recommendations for improvement., • Maintains an orderly and functional work environment., • Provides emergency on-call responsibilities as needed., • Documents all significant asset related actions in compliance with department practices., • Participates in department meetings., • Collaborates with fellow technical personnel in department meetings to ensure they are kept abreast of technical updates and/or device related problems. Preferred Qualifications: • Associates degree in electronics/biomedical equipment technology, military training or equivalent experience, • 3 years servicing clinical/patient care equipment in a hospital environment, • For field service positions requiring travel, valid driver’s license is required, • Ability to work independently with some supervision, • Good communication and strong customer service skills, • Good organization and time management skills, • Working knowledge of computer applications pertaining to tracking service histories and producing reports on assets, • Good trouble-shooting skills, • Ability and willingness to serve "on-call" duty as required Intelas is a member of Compass Group USA Click here to Learn More about the Compass Story Associates at Intelas are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Flexible Time Off, • Holiday Time Off (varies by site/state), • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs), • Paid Parental Leave, • Personal Leave Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. We encourage applicants with a criminal history (and driving history) to apply. Applications are accepted on an ongoing basis. Intelas maintains a drug-free workplace.

Job DescriptionPosition: DSR Technician Employee Type: Full-Time (1st & 2nd shift) Polamer Precision is seeking a DSR/Deburring Technician who will be responsible for the following job duties/responsibilities. Responsibilities: • Deburring, assembly, Aerospace parts cleaning to operation sheet requirements, • Log jobs in/out of the ERP system, material handling, moving parts to and from their appropriate locations., • Maintain 6S Requirements, upkeep of the deburring/assembly/ cleaning area, • Communicate when scheduled work is not in their area, • Performs other non-machining tasks, cleaning, kitting, assembly, material movement, • Educational Requirements: High School Diploma or equivalent, • Understanding of general computer skills, • Ability to communicate well with all departments, • Basic knowledge of Machine shop/ production environment, • While performing duties for this job, it’s required to alternate between standing and sitting. Also perform walking, gross manipulation, climbing stairs, ladders, ramps, fine motor manipulation, lifting/carrying, pushing, and pulling, • Must be able to perform repetitive movements daily., • Required to always wear safety shoes and safety glasses when on the shop floor., • Possible risk of injury from equipment or sharp parts and may be required to use protective equipment such as gowns and safety goggles., • Requires using cranes., • Assignment may require working on loud and potentially dangerous machinery/materials., • Required to use computer or touch screen to enter work order data., • Must be able to move and lift objects of up to 50 lbs., • Comprehensive medical insurance plans including dental and vision, • Company paid insurance packages: life insurance, short-term disability, and long term disability, • 401k and HRA Funding, • Company paid apparel with dry cleaning, • Safety shoe vouchers, • Paid time off, paid holidays and paid floating holidays to accommodate our diverse work environment, • Employee Assistance Program, • Tuition reimbursement, • Continued education and professional development, • Company paid job training, • Family leave, • Employee discounts, • On-site Micro Market TO LEARN MORE ABOUT POLAMER PRECISION, INC. PLEASE VISIT: The above statements are intended to describe the general nature and level of work being performed by the individual(s) assigned to this position. Management reserves the right to modify, add, or remove duties and to assign other duties as necessary. They are not intended to be an exhaustive list of all duties, responsibilities, and skills required. Polamer Precision, Inc is proud to be an Equal Opportunity/Affirmative Action Employer M/F/D/V. We maintain a drug-free workplace and perform pre-employment substance abuse testing. Powered by JazzHR DaRpp4Vwwt

Job Description Onsite Women's Health is on a mission to improve women's healthcare. In partnership with forward-thinking providers across the country, Onsite Women's Health offers comprehensive mammography services with clinical expertise, innovative technology, and proprietary protocols that delivers personalized, convenient breast care for the patient. Convenience drives compliance, and compliance saves lives.Convenience is critical to ensure that most women have time to remain compliant with their breast care. By offering mammography and breast care within the patient's primary care or OB/GYN practice and scheduling appointments in coordination with an annual exam, compliance is easier to accomplish. The Opportunity The OWH program is unparalleled, making breast cancer screening more convenient for women. Are you tired of working weekends? Do you want a Monday - Friday work schedule? Do you like to work independently and have ownership of all aspects of patient-centric care? See yourself here. At Onsite we don't work weekends and offer the opportunity to use the latest 3D tomosynthesis digital mammography equipment in an OB/Gyn office environment. If you are an experienced mammographer, someone who can work independently and wants to have an impact on each and every patient, join us! What do you need to be the right candidate for this role? • Must be up to date on all CME credits., • Hold a valid state license if applicable., • Must be very patient centric, compassionate, and computer savvy., • Able to perform a variety of technical activities associated with the performance of screening and diagnostic mammography procedures., • Flexible with the ability to multi-task., • Specializes in the production of screening and diagnostic mammograms for the detection of breast cancers and lesions., • Responsible for the initial and ongoing success of the mammography service in the practice in which one works., • Assist practice in any and all ways possible to be sure all eligible age-appropriate patients have annual screening mammograms - this is particularly critical in the first 18 months of a new practice., • Prepares patients for the mammographic procedure., • Explains procedures to the patient to reduce anxieties and obtain patient cooperation., • Moves mammographic equipment to specific positions and adjusts controls to set exposure factors based on knowledge of radiographic exposure techniques and protocols., • Practices radiation protection techniques by using beam restrictive devices, patient shielding skills., • Follows prescribed safety standards in operating all required equipment., • Examines digital images for image quality., • Ensures equipment is in proper working order at all times., • Performs all required QA testing required to comply with MQSA, ACR and State requirements/regulations., • Maintains patient confidentiality at all times., • Processes routine paperwork and all required data entry., • Participates in professional development activities and maintains professional affiliations. Experience:

Job Description The Claims Specialist manages within company best practices lower-level, non-complex and non-problematic workers’ compensation claims within delegated limited authority to best possible outcome, under the direct supervision of a senior claims professional, supporting the goals of claims department and of CorVel. This is a remote role. ESSENTIAL FUNCTIONS & RESPONSIBILITIES: • Receives claims, confirms policy coverage and acknowledgment of the claim, • Determines validity and compensability of the claim, • Establishes reserves and authorizes payments within reserving authority limits, • Manages non-complex and non-problematic medical only claims and minor lost-time workers’ compensation claims under close supervision, • Communicates claim status with the customer, claimant and client, • Adheres to client and carrier guidelines and participates in claims review as needed, • Assists other claims professionals with more complex or problematic claims as necessary, • Additional duties as assigned KNOWLEDGE & SKILLS: • Excellent written and verbal communication skills, • Ability to learn rapidly to develop knowledge and understanding of claims practice, • Ability to identify, analyze and solve problems, • Computer proficiency and technical aptitude with the ability to utilize MS Office including Excel spreadsheets, • Strong interpersonal, time management and organizational skills, • Ability to meet or exceed performance competencies, • Ability to work both independently and within a team environment EDUCATION & EXPERIENCE: • Bachelor's degree or a combination of education and related experience, • Minimum of 1 year of industry experience and claims management preferred, • State Certification as an Experienced Examiner PAY RANGE: CorVel uses a market based approach to pay and our salary ranges may vary depending on your location. Pay rates are established taking into account the following factors: federal, state, and local minimum wage requirements, the geographic location differential, job-related skills, experience, qualifications, internal employee equity, and market conditions. Our ranges may be modified at any time. For leveled roles (I, II, III, Senior, Lead, etc.) new hires may be slotted into a different level, either up or down, based on assessment during interview process taking into consideration experience, qualifications, and overall fit for the role. The level may impact the salary range and these adjustments would be clarified during the offer process. Pay Range: $51,807 - $83,551 A list of our benefit offerings can be found on our CorVel website: CorVel Careers | Opportunities in Risk Management In general, our opportunities will be posted for up to 1 year from date of posting, or until we have selected candidate(s) to fulfill the opening, whichever comes first. ABOUT CORVEL CorVel, a certified Great Place to Work® Company, is a national provider of industry-leading risk management solutions for the workers’ compensation, auto, health and disability management industries. CorVel was founded in 1987 and has been publicly traded on the NASDAQ stock exchange since 1991. Our continual investment in human capital and technology enable us to deliver the most innovative and integrated solutions to our clients. We are a stable and growing company with a strong, supportive culture and plenty of career advancement opportunities. Over 4,000 people working across the United States embrace our core values of Accountability, Commitment, Excellence, Integrity and Teamwork (ACE-IT!). A comprehensive benefits package is available for full-time regular employees and includes Medical (HDHP) w/Pharmacy, Dental, Vision, Long Term Disability, Health Savings Account, Flexible Spending Account Options, Life Insurance, Accident Insurance, Critical Illness Insurance, Pre-paid Legal Insurance, Parking and Transit FSA accounts, 401K, ROTH 401K, and paid time off. CorVel is an Equal Opportunity Employer, drug free workplace, and complies with ADA regulations as applicable. #LI-Remote

Job Description Position Title: BMET II Join Intelas, a Compass One Healthcare company. Intelas, a Compass One Healthcare company, delivers smarter asset management by blending expert service teams with intelligent, data-driven strategies that help hospitals improve uptime, simplify oversight, and make more informed capital decisions. Our programs support 100% regulatory compliance and drives 98% equipment uptime—so clinicians can focus on care, not equipment issues. We support nearly 4,500 healthcare sites nationwide—from large, campus-based acute care hospitals to system-integrated outpatient clinics. With more than 1.15 million medical devices managed, we provide the clarity and consistency needed in today’s rapidly evolving healthcare environment. Join Intelas—where your career thrives, your potential is unleashed, and your work directly supports patient care. Whether you're just starting out or are a seasoned professional, our people-first approach ensures opportunities for continuous growth, development, and fulfillment. Explore more at intelashealth.com. Job Summary Key Responsibilities: • Performs planned maintenance and electrical safety inspections on a broad range of patient care and selected support equipment in compliance with established standards., • Manages all assigned equipment and schedules service., • Performs pre-acceptance inspections and develop PM procedures on equipment; maintains files on procedures and manuals., • Ensures test equipment is working properly and calibrated within established intervals., • Responds expeditiously to calls from clinical departments to evaluate and rectify valid operator complaints and concerns., • Researches and initiates orders for repair parts, working within established budget parameters., • Maintains purchase order log and validate invoices for payment (field service personnel only)., • Provides informal training to equipment users and Crothall Services Group staff as requested or when circumstances dictate., • Makes recommendations to the Department Manager regarding service strategies on equipment; keeps supervisor informed of activities, needs and problems., • Participates in the Quality Improvement / Risk Management program by gaining an understanding of the issues and concerns of customers and making recommendations for improvement., • Maintains an orderly and functional work environment., • Provides emergency on-call responsibilities as needed., • Documents all significant asset related actions in compliance with department practices., • Participates in department meetings., • Collaborates with fellow technical personnel in department meetings to ensure they are kept abreast of technical updates and/or device related problems. Preferred Qualifications: • Associates degree in electronics/biomedical equipment technology, military training or equivalent experience, • 3 years servicing clinical/patient care equipment in a hospital environment, • For field service positions requiring travel, valid driver’s license is required, • Ability to work independently with some supervision, • Good communication and strong customer service skills, • Good organization and time management skills, • Working knowledge of computer applications pertaining to tracking service histories and producing reports on assets, • Good trouble-shooting skills, • Ability and willingness to serve "on-call" duty as required, • Strong work ethic and ability to work as a member of a team Apply to Intelas today! Intelas is a member of Compass Group USA Click here to Learn More about the Compass Story Associates at Intelas are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Flexible Time Off, • Holiday Time Off (varies by site/state), • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs), • Paid Parental Leave, • Personal Leave Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. We encourage applicants with a criminal history (and driving history) to apply. Applications are accepted on an ongoing basis. Intelas maintains a drug-free workplace. Req ID: 1464587 Intelas Deborah Chermak [[req_classification]]

Job Description Koenig & Bauer is the oldest, global printing press manufacturer in the world! For more than 200 years, we have been bringing together innovative technology and enthusiasm for tailor-made print solutions for our customers. You will find products printed on our machines all around you every day including the US currency in your wallet and much of the packaging in your grocery stores and big box retail stores. With the broadest product portfolio in the industry, groundbreaking machines and a holistic service promise, Koenig & Bauer sets international standards. Our 5,500 employees worldwide generate annual sales of €1.2 billion. This is your opportunity to join Koenig & Bauer (US), the sales and service organization for Koenig & Bauer in the United States and the North American headquarters. Become part of our company where creativity, fascination and passion for mechanical and electrical engineering work together as we develop the printing world of tomorrow and exceed print! Location: Northeast Region. May consider qualified applicants from other areas. 100% Remote with nearly 100% business travel domestically Reports to: Service Manager Standard Schedule: Standard work schedule is Monday – Friday and hours vary; but must be able to work weekends, early mornings, and some evenings FLSA Status: Non-Exempt/Hourly Compensation: $27 - $46 per hour Job Responsibility: The Service Technician–Mechanic travels to customer locations to install, maintain, upgrade, troubleshoot, diagnose, and repair mechanical, pneumatic, and printing issues for Koenig & Bauer printing presses. The Service Technician interacts directly with the customer listening to their needs and asking probing questions in preparation for the installation or service call and must be able to effectively communicate technical information and resolutions to customers with varying degrees of technical knowledge and abilities. The Service Technician must come up with the plan of action to address the customer issue with an emphasis on quality work (fix it right the first time) and efficiency to minimize installation or downtime and to control costs. Essential Duties and Responsibilities: • Perform various mechanical repairs and maintenance on Koenig & Bauer equipment at customer sites including but not limited to gripper settings on impression and transfer delivery bars, pump and inker issues, seals, register drives, ink key seals, plate and blanket clamps, bladder replacement, machines crashes with infeed, inker, base unit, or delivery, perfector issues, and cylinder replacement., • Perform installation of Koenig & Bauer equipment, 40-inch and up, and sub-supplier equipment such as Baldwin cabinet, Technotrans or AGT cabinet, etc. in accordance with blueprints from time of delivery to commissioning press including installing base units straight on the pad, inker placement, installation of infeed, extension, delivery, and feeder; placement of pumps and cabinets (i.e. wash-up or air)., • Perform thorough audits on presses, as scheduled, inspecting from the feeder to the delivery and identifying worn or damaged parts with emphasis on safety-related issues. Identification of parts, parts numbers, estimating necessary repair time for each component, and prioritizing list of needed repairs by safety, quality, and production., • Troubleshoot complex mechanical issues with thorough research and investigation using available documentation such as service manuals and repair documentation, internal resources such as other technicians, Director of Technical Service, or Service Manager to accurately identify the necessary repairs and the root cause analysis for the failure., • Determine and execute an action plan for making necessary repairs including identifying necessary parts and working with the customer and Koenig & Bauer Parts Department in the procurement of parts, working with the customer and Koenig & Bauer Service Department on the necessary time and schedule for repair, working with Service on additional labor or specialized skills necessary to do the job, working with Koenig & Bauer Warehouse and Service in the arrangement of any special tools needed for the job., • Deliver world-class customer service with each and every customer interaction including introducing or greeting the customer upon your arrival, listening and asking questions of the customer to understand how you can help, informing customer of your findings as well as recommended action plan including schedule and timeline, and touching base with customer at the end of the job or during critical milestones while on the job., • Fulfill the obligation of the original service call and see the service call through completion making any arrangements for alternative schedule, as deemed necessary, with the Service Department. Requests for additional work outside the scope of the original service call must be arranged through the Service Department., • Complete accurate and timely records including recording parts used and returned, updating open/closed issues spreadsheet, recording time, expenses, and work performed in MDS, and any other required paperwork or records., • Adhere to all applicable customer practices and policies while working at their site including arrival and departure procedures, following safety policies and using necessary personal protective equipment, and adhering to policies regarding smoking and eating in the workplace., • Performs other related job responsibilities as necessary based on business needs. Required Qualifications: Education: High School Diploma or GED-equivalent required but post-high school degree or certification in a technical field including but not limited to printing, industrial/plant maintenance. Experience: Two years minimum of related education and work experience in printing, press manufacturing, industrial/plant maintenance, r other related technical field. Computer Skills: Computer literacy with basic knowledge of e-mail, internet navigation, word processing, spreadsheets, and other business system software. Knowledge, Abilities, and Interpersonal Skills: • Experience working with basic hand tools such as wrenches, ratchets, sockets, pliers, hammer, screw drivers. Applicants with disabilities may be entitled to reasonable accommodation under the Americans with Disabilities Act and certain state or local laws. A reasonable accommodation is a change in the way things are normally done which will ensure an equal employment opportunity without imposing undue hardship for the employer. Please contact Koenig & Bauer’s HR Department at or 469-532-8120 if you need assistance completing this application or to otherwise participate in the application process. Benefits Vacation – 15 days per year Holidays – Up to 11 days Sick – 7 days Medical, Dental, and Vision Disability and Life Flexible Spending Accounts 401k Retirement and Profit Sharing Plan Income replacement plans for cancer, critical illness, and accident Long-Term Care Plans Years-of-Service Bonus Plan Educational Assistance

Job Description Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufactures of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. The Robert E. Morris Company is a division of Morris Group, Inc. We supply CNC machine tools, tools, accessories, software, automation, and more to manufacturers of precision machine parts. Our customer base is in the New England states plus northern New Jersey and eastern New York, including the New York metropolitan area and Long Island. Our mission is to help manufacturers from all industry sectors achieve and maintain a competitive advantage by improving efficiency. We help you make better parts, less expensive. Job Responsibilities The Preventative Maintenance Technician will have a basic understanding of electrical, and mechanical systems to successfully provide scheduled maintenance of CNC production equipment through the use of hand and power tools, electric meters, and material handling equipment. Duties include but are not limited to. • Daily travel from home to Customer facilities with occasional overnight hotel stays required when servicing remote Customer locations within the designated coverage territory or when participating in remote training programs., • Demonstrating a willingness to help others and be a team member., • Applying machine tool manuals, technical documents, internal and vendor resources to research machine parts and service., • Provide a direct communication link between the Customer and the Service Group of the Robert E. Morris Company., • Aligning with safety laws and maintaining a clean, orderly work area., • Promoting and performing preventative maintenance on customer machine tool equipment and conducting maintenance training to customer employees., • Possessing and maintaining an in-depth knowledge of machine tool industry and product lines represented by the company., • Through service and Customer relationships, build brand loyalty., • Conduct travel and work in a safe manner, constantly learning new technology and soft skills. Other Functions: Qualifications & Competencies: • Competent English verbal and written communication and Customer relation skills., • Able to interact and effectively communicate in person and over the phone with customers and co-workers., • Must be adaptable to changes and able to deal with change, delays, or general work-related issues., • Basic computer literacy and working knowledge of MS Office, Word, Excel, and Outlook and other business programs., • Must have, and/or be willing/capable of being trained to develop, electro-mechanical skills (motors, drives, transformers etc.)., • Knowledge of machine tool manufacture, installation, operation, maintenance & repair and/or a broad shop background – is a plus., • Basic mechanical and logical troubleshooting skills are a must., • Rational decision making and problem-solving skills., • Manufacturing experience in CNC machine tool repair a plus., • Experience with multi-control systems environment is required, troubleshooting skills a plus., • The ability to read and interpret drawings and schematics., • Excellent technical, communication, and presentation skills. What’s in it for You: We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work:Competitive starting salary • Competitive starting salary, • Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance, • 3+ Weeks’ Vacation to Start, • 10 Company Paid Holidays, • 401(k) retirement plan with company contribution, • Tuition reimbursement, • Employee appreciation events and perks, • Employee Assistance Program Mental and Physical Requirements: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Must be highly mobile, able to access all areas of the premises., • Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects., • Ability to sit for prolonged period of times., • Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees., • Ability to frequently use hands and arms., • Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. Requisition #: 1157B (Hartford, CT)

Job Title: Mechanical Technician Location: Bloomfield CT / Onsite Schedule: Monday – Friday, 8:00 AM – 5:00 PM Pay Rate: $26/hour Summary The Mechanical Technician will support engineering staff by modifying, testing, and repairing machinery and equipment. This role involves hands-on work assembling diesel engine test and prototype hardware and performing testing in an engineering lab environment. The ideal candidate has solid mechanical assembly skills, experience with automotive or diesel truck engines, and a reliable, detail-oriented work ethic. Education & Experience Preferred: Associate degree or certification in Engineering Technology or a related field. Required: Minimum of 2 years of relevant hands-on experience, preferably with automotive or diesel truck engines. Responsibility Level Performs work under moderate supervision, exercising independent judgment as directed by the supervisor or engineering staff. Key Skills & Competencies Mechanical assembly skills for both small and large components using hand tools. Basic computer literacy and written communication skills. Punctual, dependable, and team-oriented. Creativity, problem-solving, and analytical thinking. Ability to create sketches, engineering drawings, and perform basic calculations. Familiarity with engineering design software and computer applications. Knowledge of manufacturing, construction, and installation standards and specifications. Major Duties & Responsibilities Assemble diesel engine test and prototype hardware; perform functional and performance testing in lab settings. Review project instructions, blueprints, and specifications to determine test objectives and identify potential design or assembly issues. Prepare parts sketches, work orders, and purchase requests for components or contractor services. Draft detailed drawings or sketches to support fabrication or assembly requirements. Evaluate and verify tool and component designs, ensuring accuracy and functionality according to engineering specifications. Inspect drawings and documentation for accuracy, coordinating corrections as necessary. Collaborate with engineering teams to discuss design modifications, methods of manufacture, and assembly improvements. Apply with an updated resume! Ref: #193-Precision Oakridge

Job Description SUMMARY: The Regional Sales Manager (RSM) is responsible for closing business and achieving profitable growth in a defined territory by selling INDEX’s industry-leading multi-spindle and CNC solutions. This role demands disciplined territory planning, deep competitive research, mastery of ROI-based selling, and a relentless focus on exceeding customer and company expectations. The RSM targets the right customers, wins with data-driven proposals, and ensures every sale leads to the next machine order. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Close Business: Consistently meet or exceed annual sales goals and deliver committed revenue to the company., • Exceed Expectations: Ensure customers receive maximum value from their investment and the company achieves a strong ROI using Index sales resources., • Territory Strategy: Develop and execute an attack plan—know the competition, their weaknesses, and where INDEX wins decisively., • Customer Engagement: Build trust-based relationships with decision-makers from the shop floor to the C-suite., • ROI Selling: Present clear, quantified ROI models showing productivity gains, scrap reduction, flexibility, and total cost of ownership., • Competitive Positioning: Outperform any competitor in head-to-head evaluations with fact-based selling and superior applications knowledge., • CRM & Reporting Discipline: • Maintain accurate, real-time updates in CRM for all opportunities, activities, and forecasts., • Log meeting notes, next steps, and expected close dates so data is actionable across the company., • Provide accurate monthly, quarterly, and annual forecasts. • Account Growth: Turn each win into multiple orders through exceptional service and long-term relationship building., • Travel: Willing and able to travel extensively in the territory and internationally for training, customer visits, and trade shows., • Professional Communication: Persuasive with both technical and executive audiences., • Has a Closer’s mentality – always driving to win business and hit targets., • Execution Discipline – Maintains CRM accuracy, updates forecasts, and meets all reporting deadlines., • Performance Expectations, • Consistently deliver exceptional customer satisfaction while maximizing company profitability., • Meet or exceed annual territory quota., • Maintain a 3x quota pipeline of qualified opportunities., • Deliver complete ROI analyses for all major deals., • Update CRM and forecasts weekly without exception. SUPERVISORY RESPONSIBILITIES: This job has no supervisory responsibilities. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty and responsibility according to the requirements of INDEX Corporation. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. COMPETENCIES: Company-related Competencies – To perform this job successfully, all employees of INDEX Corporation must demonstrate the following competencies; Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly. Ethics - Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethically; Upholds organizational values. Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality. Teamwork - Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed. Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments. Job-related Competencies – To perform this job successfully, incumbents in this job should demonstrate the following competencies; Project Management – Develops project plans; Coordinates projects; Communicates changes and progress; Completes projects on time and budget; Manages project team activities. Technical Knowledge - A background or awareness of machining processes, applications or engineering. Value Selling – Able to sell higher priced machine tools via value added not just via price. Strategic Thinking – Develops strategies to achieve organizational goals; Understands organization’s strengths and weaknesses; Analyzes market and competition; Identifies external threats and opportunities; Adapts strategy to changing conditions. Always driving to win business and hit targets. Time Management – Able to organize all sales activates (i.e. travel, customer/dealer visits, etc.) to make the best use of available working hours. Initiative – Volunteers readily; Undertakes self-development activities; Seeks increased responsibilities; Takes independent actions and calculated risks; Looks for and takes advantage of opportunities; Asks for and offers help when needed. Closer’s Mentality – Always driving to win business and hit targets. Competitive Drive – Relentlessly seeks market share gains. Customer Focused – Builds partnerships that deliver repeat orders. Communication – Persuasive with both technical and executive audiences. EDUCATION and/or EXPERIENCE: Bachelor’s Degree (B.S.) business, engineering, or related field, or equivalent experience; and five plus years of capital equipment sales experience, preferably in CNC/machine tool or manufacturing technology; or equivalent combination of education and experience is required. Proven record of consistently closing business and meeting/exceeding sales goals. Strong technical understanding of machining processes and productivity improvement strategies. Advanced proficiency in CRM usage, forecasting, and reporting. LANGUAGE SKILLS: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS: Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. REASONING ABILITY: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. CERTIFICATES, LICENSES, REGISTRATIONS: A valid driver’s license is required for this position. OTHER SKILLS AND ABILITIES: Computer software skills required include: Microsoft Outlook, Word, Excel, PowerPoint and Adobe. Ability to operate a printer, copy machine, scanner and other office equipment is desired. Employee must have the ability to adapt and conform to shifting priorities and demands and execute accordingly. OTHER QUALIFICATIONS: Employee should have strong time management skills and be able to multi-task while meeting demanding deadlines and working with numerous interruptions, as well as confidential information. Strong verbal and written communication skills are required. This position requires both domestic and international travel. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties and responsibilities. While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee frequently will stand; and walk. The employee occasionally will climb or balance; stoop, kneel, crouch or crawl; taste or smell; and lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision (clear vision at 20 inches or less), distance vision (clear vision at 20 feet or more), color vision (ability to identify and distinguish colors), peripheral vision (ability to observe an area that can be seen up and down or to the left and right while eyes are fixed on a given point), depth perception (three-dimensional vision, ability to judge distances and spatial relationships), and the ability to adjust focus (ability to adjust the eye to bring an object into sharp focus). WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The normal office hours at INDEX Corporation are 8:00 a.m. to 5:00 p.m., Monday through Friday. However, employees in this position may be required to work additional hours to meet the demands of the job. While performing the duties of this job, the employee is frequently exposed to outdoor weather conditions and is occasionally exposed to working near moving mechanical parts and the risk of electrical shock. The noise level in the work environment is usually moderate to loud. #ZR

Job DescriptionAt Propio Language Services we are closing the language gap by connecting people anywhere and anytime through innovative technology and solutions. Founded in 1998 Propio Language Services provides critical interpreting and translation services that improve the quality of life with the communities we engage in. We do that by providing both remote and on-site services in more than 350 languages, for over 6,000 clients with a diverse and highly experienced staff, and over 8,000 contract interpreters. Quality interpretation is critical to our shared success, and it is only possible by bringing in the best interpreters in the industry. We currently have a need for Onsite Interpreters in the Hartford, CT area who have a sincere desire to use their language skills to help people and are passionate about what they do. Contract Responsibilities: • Provides consecutive in person and virtually both by phone and video remote first-person interpretation., • Follows interpreter protocols and procedures as required by Propio L.S. clients., • Follows all Propio L.S. policies and procedures related to information confidentiality and interpreter ethics., • Maintains strict patient confidentiality in accordance with HIPAA, FERPA, GLBA and/or regulatory requirements or policies and standards., • Establishes and maintains quality service and positive interaction with all patients, customers, visitors, health care providers, and clinical employees., • Continuously improves vocabulary and specialized subject matter knowledge, as required for various clients, such as medical, legal, social services, etc.Requirements:, • Submission of updated Resume in English at time of Application., • Must be at least 18 years of age., • High school diploma or GED equivalent, • Intermediate level computer skills, • Access to reliable transportation, • Ability to provide documentation of updated vaccinations to include but not limited to (dependent of location, federal and local regulations and business policies for healthcare and others): TB, MMR, Varicella, Hep B (or declination), TDAP and Seasonal Influenza (Flu) and Covid, • Successful completion of a drug test and Background Check & Security Screen., • A signed commitment to confidentiality, adherence to ethics, and HIPAA compliance., • 1+ years of interpreting experience.Propio’s evaluation process conforms to interpreting standards defined by:, • National Council on Interpreting in Health Care (NCIHC), • International Medical Interpreters Association (IMIA) a7Kppnt6cD

Job DescriptionAt Propio Language Services we are closing the language gap by connecting people anywhere and anytime through innovative technology and solutions. Founded in 1998 Propio Language Services provides critical interpreting and translation services that improve the quality of life with the communities we engage in. We do that by providing both remote and on-site services in more than 350 languages, for over 6,000 clients with a diverse and highly experienced staff, and over 8,000 contract interpreters. Quality interpretation is critical to our shared success, and it is only possible by bringing in the best interpreters in the industry. We currently have a need for Onsite American Sign Language Interpreters in Hartford, CT area who have a sincere desire to use their language skills to help people and are passionate about what they do. Contract Responsibilities: • Provides consecutive in person and virtually both by phone and video remote first-person interpretation., • Follows interpreter protocols and procedures as required by Propio L.S. clients., • Follows all Propio L.S. policies and procedures related to information confidentiality and interpreter ethics., • Maintains strict patient confidentiality in accordance with HIPAA, FERPA, GLBA and/or regulatory requirements or policies and standards., • Establishes and maintains quality service and positive interaction with all patients, customers, visitors, health care providers, and clinical employees., • Continuously improves vocabulary and specialized subject matter knowledge, as required for various clients, such as medical, legal, social services, etc.Requirements:, • Submission of updated Resume., • Must be at least 18 years of age., • High school diploma or GED equivalent, • Intermediate level computer skills, • Access to reliable transportation, • Ability to provide documentation of updated vaccinations to include but not limited to (dependent of location, federal and local regulations and business policies for healthcare and others): TB, MMR, Varicella, Hep B (or declination), TDAP and Seasonal Influenza (Flu) and Covid, • Successful completion of a drug test and Background Check & Security Screen., • A signed commitment to confidentiality, adherence to ethics, and HIPAA compliance.Preferred Qualifications:, • 1+ years of interpreting experience.Propio’s evaluation process conforms to interpreting standards defined by:, • National Council on Interpreting in Health Care (NCIHC), • International Medical Interpreters Association (IMIA) TYkex5fIkg

Job Description Datavant is a data platform company and the world's leader in health data exchange. Our vision is that every healthcare decision is powered by the right data, at the right time, in the right format. Our platform is powered by the largest, most diverse health data network in the U.S., enabling data to be secure, accessible and usable to inform better health decisions. Datavant is trusted by the world's leading life sciences companies, government agencies, and those who deliver and pay for care. By joining Datavant today, you're stepping onto a high-performing, values-driven team. Together, we're rising to the challenge of tackling some of healthcare's most complex problems with technology-forward solutions. Datavanters bring a diversity of professional, educational and life experiences to realize our bold vision for healthcare. Position Highlights: • Part-Time: Monday-Friday 10:00AM-2:30 PM EST, • Location: This role will be performed at one location (Farmington, CT 06030), • Comfortable working in a high-volume production environment., • Processing medical record requests by taking calls from patients, insurance companies and attorneys to provide medical status., • Documenting information in multiple platforms using two computer monitors., • Receive and process requests for patient health information in accordance with Company and Facility policies and procedures., • Maintain confidentiality and security with all privileged information., • Maintain working knowledge of Company and facility software., • Adhere to the Company's and Customer facilities Code of Conduct and policies., • Inform manager of work, site difficulties, and/or fluctuating volumes., • Assist with additional work duties or responsibilities as evident or required., • Consistent application of medical privacy regulations to guard against unauthorized disclosure., • Responsible for managing patient health records., • Responsible for safeguarding patient records and ensuring compliance with HIPAA standards., • Prepares new patient charts, gathering documents and information from paper sources and/or electronic health records., • Ensures medical records are assembled in standard order and are accurate and complete., • Creates digital images of paperwork to be stored in the electronic medical record., • Responds to requests for patient records, both within the facility and by external sources, retrieving them and transmitting them appropriately., • Answering of inbound/outbound calls., • May assist with patient walk-ins., • May assist with administrative duties such as handling faxes, opening mail, and data entry., • Must meet productivity expectations as outlined at a specific site., • May schedules pick-ups., • High School Diploma or GED., • Ability to commute between locations as needed., • Able to work overtime during peak seasons when required., • Basic computer proficiency., • Comfortable utilizing phones, fax machines, printers, and other general office equipment on a regular basis., • Professional verbal and written communication skills in the English language., • Detail and quality oriented as it relates to accurate and compliant information for medical records., • Strong data entry skills., • Must be able to work with minimum supervision responding to changing priorities and role needs., • Ability to organize and manage multiple tasks., • Experience in a healthcare environment., • Previous production/metric-based work experience., • In-person customer service experience., • Ability to build relationships with on-site clients and customers. This job is not eligible for employment sponsorship. Datavant is committed to a work environment free from job discrimination. We are proud to be an Equal Employment Opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status. To learn more about our commitment, please review our EEO Commitment Statement here. Know Your Rights, explore the resources available through the EEOC for more information regarding your legal rights and protections. In addition, Datavant does not and will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay. At the end of this application, you will find a set of voluntary demographic questions. If you choose to respond, your answers will be anonymous and will help us identify areas for improvement in our recruitment process. (We can only see aggregate responses, not individual ones. In fact, we aren't even able to see whether you've responded.) Responding is entirely optional and will not affect your application or hiring process in any way. Datavant is committed to working with and providing reasonable accommodations to individuals with physical and mental disabilities. If you need an accommodation while seeking employment, please request it here, by selecting the 'Interview Accommodation Request' category. You will need your requisition ID when submitting your request, you can find instructions for locating it here. Requests for reasonable accommodations will be reviewed on a case-by-case basis. For more information about how we collect and use your data, please review our Privacy Policy.

Job DescriptionDetails: Posted: September 1, 2025 Level: Instructor, tenure track position Hours: Full-time, 10-month (30 credit hours per academic year) Closing Date: Applications must be submitted by 5:00pm (EST) on Wednesday, November 5 2025. Location: CT State Capital 950 Main Street, Hartford, CT 06103 This position is not remote For more information about CT State Community College and the campus please visit Home - CT State CT State Community College Mission: Connecticut State Community College provides access to academically rigorous and innovative education and training focused on student success. The college supports excellence in teaching and learning, makes data-informed decisions, promotes equity, and advances positive change for the students, communities and industries it serves. CT State Community College Vision: Connecticut State Community College is recognized for exceptional student success, educational leadership and transformative collaboration with business and industry, government, educational and key stakeholders while advancing diverse opportunities for Connecticut’s citizens and communities. CT State Community College Equity Statement: Connecticut State Community College commits to bold and disruptive change by actively identifying, naming, and dismantling structural racism, systemic poverty, and other barriers; establishing equitable and anti-racist policies and practices; and empowering students, faculty, staff, and administrators to advance racial, social, and economic justice. Our core collective responsibility is to continuously assess practices and policies and transform the world we live in by eliminating inequities. Anticipated Start Date: Fall 2026 (August 25, 2026) Position Summary: All Teaching Faculty members shall: Prepare and teach college-approved courses in accordance with approved course descriptions and class schedules, including developing syllabi and reading lists and keeping each course taught complete and up to date; respond to and work with multiple constituencies, including students, peers (faculty and staff), and external agencies (business, community, educational, etc.); perform divisional departmental responsibilities in the selection of texts and related teaching resources; and other teaching and related duties as outlined on the Collective Bargaining Agreement. Example of Job Duties: Under the direction of the Dean or Chair of the department, this Instructor is expected to teach thirty (30) credit hours per academic year and will be responsible for teaching a range of courses in the discipline area of study. Additional duties may include evaluating and assessing student learning; providing student support and academic advising; planning and executing program-related events; assisting with program reviews; developing curriculum and periodically evaluating teaching materials; and attending workshops and or conferences to maintain currency in profession and field. The teaching schedule may include both day and evening classes. Course delivery systems may be lecture, hybrid, and/or online. In addition to the accountabilities listed above, the incumbent is required to carry out the essential duties of attendance and participation at convocation and commencement ceremonies; service on assigned committees and task forces; and attendance and participation at committee, staff, informational and professional meetings. These may involve attendance at evening or weekend events. This posting includes qualifications, experience and skills but is not limited to the full duties and responsibilities that is stated within the Collective Bargaining Agreement. Minimum Qualifications: Master’s degree in Mathematics or a related discipline e.g., Applied Mathematics, Statistics, Math Education. Candidates must possess proven ability to effectively work with culturally, linguistically, and ethnically diverse faculty, staff, and students. They are expected to have excellent interpersonal oral and written communication skills along with strong Information technology literacy skills such as Microsoft Office (Word, Excel, PowerPoint, Outlook, Teams etc.). Preferred Qualifications: • Experience teaching mathematics in a college setting, including but not limited to Developmental Mathematics, Quantitative Reasoning (Math for Liberal Arts), Algebra, Statistics, and Calculus in a college setting, with an emphasis on modeling, problem-solving, and critical thinking.(24+ credits), • Experience using mathematical technology tools to support instruction and student engagement, including graphing calculators (TI-83 and above), and visualization and modeling tools (e.g., Desmos, GeoGebra, Excel)., • Experience using learning management systems (e.g., Canvas, Blackboard, etc.) and online learning platforms (e.g., MyMathLab, ALEKS, WebAssign, Hawks) to support student engagement., • Experience connecting mathematical concepts to real-world applications across both STEM (e.g., science, technology, engineering, healthcare) and non-STEM (e.g., economics, arts, social sciences) disciplines. This should be demonstrated through specific projects, teaching examples, research, or professional work that show how math was integrated into diverse disciplines. We offer a comprehensive benefits package to help you stay well, protect yourself and your family, and plan for a secure future. Benefits include generous leave policies; several retirement plans; and many choices for comprehensive health insurance. You also have access to many additional benefits to save for retirement, protect your family & more with supplemental benefits. Tuition reimbursement may apply if applicable. For more information, please visit our website at: CSCU - Human Resources - Future Employees. Application Instructions: To apply you must submit a cover letter and resume. The cover letter may be entered as text in the corresponding box, or it can be uploaded as a combined file with the resume. Incomplete applications or those submitted after the closing date will not be considered and links to other sources to view resumes are not acceptable. To apply via our website, visit . Selection Procedure: Following the closing date, application materials will be evaluated by a selection committee. Candidates selected for further consideration will be limited to those applicants who are best qualified based on the minimum and preferred qualifications and who have submitted all the required documents by the closing date and time listed on the job announcement. Candidates who have been selected and approved to interview will be contacted, and finalists will be recommended for further consideration by the Hiring Manager for final selection and recommendation for employment. The selection process may also include practical exercises (i.e., teaching demonstration and/or other written, technical, manipulative, or simulation exercises) to evaluate candidates' qualifications. Background Screening: All employment, if offered, is contingent upon proof of citizenship or employability under the requirement of the Immigration and Control Act (IRCA) and the successful passing of a background check, including granting permission to contact current and previous employers for verification. CSCU is committed to providing a safe campus community. Background investigations include reference checks, a criminal history record check and, when appropriate, a financial (credit) report or driving history check. Continuing Notice of Nondiscrimination CT State Community College does not discriminate on the basis of age, ancestry, color, national origin, gender identity or expression, genetic information, learning disability, marital status, intellectual disability, physical disability (including but not limited to blindness), present or past history of mental disability, prior criminal record, race, religious creed, sex (including pregnancy and sexual harassment), sexual orientation, retaliation for previously opposed discrimination or coercion, veteran status, victims of domestic violence, sexual assault, and/or trafficking or any other federal or state protected class in its employment, programs, and activities, unless the provisions of Section 46a-80(b) or 46a-81(b) of the Connecticut General Statutes are controlling or there are bona fide occupational qualifications excluding persons in one of the above protected groups. For information regarding the nondiscrimination, disability, and Title IX policies/procedures, contact: John-Paul Chaisson-Cardenas, Vice President for Diversity, Equity, and Inclusion, CT State Community College, 185 Main Street, New Britain, CT 06051, 860-612-7056 or . CSCC IS AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER. Powered by JazzHR JphObyd2lH

Job Description Location: This position is fully remote and is being posted in Connecticut however, candidates are not required to live in any specific state. The only requirement is to hold an active SLP license (or be willing to obtain one prior to start) in any of our CST/EST states: Georgia, Texas, Massachusetts, Maryland, New Jersey, Virginia, Tennessee, North Carolina or New York. Compensation: This is a non-exempt, W2 hourly position. While annual compensation can vary based on the total number of hours an SLP desires to work, our clinical rates range from $40-$54 per hour. The clinical rate compensates for both direct care and indirect documentation. Will you join us? At Expressable, our mission is to expand access to family-led speech therapy, empowering caregivers to be active participants in their loved one’s communication journey. We know the best care starts with the best providers, and we’re committed to creating an unmatched working experience for our speech-language pathologists. Certified by the Joint Commission with over 3,000+ 5-star reviews, you’ll join a thriving community of fully remote SLPs pioneering a clinical care model that improves access and outcomes for the families we serve. State Licensure and Hours Commitment We are seeking SLPs who are licensed, or willing to obtain licensure, in any of our key EST/CST states and able to provide a minimum of 5 direct hours per week. While SLPs have the flexibility to design a schedule that fits their needs, all availability must include time after 2:30pm. Responsibilities * Provide speech therapy sessions and evaluations for a diverse pediatric population * Diagnose and develop care plans for clients with the support of Expressable tools and resources, with a focus on clinical outcomes, client/caregiver buy-in, and education. * Complete all documentation in accordance with our quality and timeliness standards. * Fulfill all required training, client communications, screenings, licensing and credentialing tasks, and internal communications in a timely manner. * Provide PTO and sick coverage for sessions and evaluations for care continuity Qualifications * ASHA Certification / Certificate of Clinical Competence (CCC) & individual NPI number * Full licensure in your state of residence * Full licensure in state(s) Expressable is hiring for, or willingness to become licensed * Reliable internet connection Required Skills and Experience: * Minimum of 1 year of post-Clinical Fellowship experience * Experience in pediatric settings and conducting pediatric assessments * Proficiency with computer technology and ability to adapt to new tools independently * Experience working with insurance-based populations, such as Medicaid Preferred Skills and Experience * Experience working in teletherapy settings similar to Expressable * Experience with adult clinical care and conducting adult assessments * Bilingual or multilingual capabilities (e.g., Spanish or other languages) Benefits and Perks * Benefits such as health, dental and vision insurance options for employees and families if qualified * 401(k) with matching * Reimbursement for state license renewal fees * Company-provided hardware Support * Dedicated support teams to reduce administrative tasks * Custom-built technology platform designed to streamline clinician workflows * Active, supportive therapist community of 160 SLPs and growing * Monthly Grand Rounds and clinical subject matter expert groups Stay Connected Join our SLP Careers Newsletter, Elevate, to stay current with employment opportunities and other news at Expressable. More About Expressable Expressable is an equal opportunity workplace. We celebrate and embrace diversity and are committed to building a team that represents a broad tapestry of backgrounds, perspectives, and skills. Expressable is committed to the full inclusion of all qualified individuals. In keeping with our commitment, Expressable will take the steps to ensure people with disabilities are provided reasonable accommodations. Accordingly, if reasonable accommodation is required to fully participate in the job application or interview process, to perform the essential functions of the position, and/or to receive all other benefits and privileges of employment, please contact us at . E-Verify Federal law requires all employers to verify the identity and employment eligibility of all person hired to work in the United States. Expressable participates in E-Verify. E-Verify Participation Poster E-Verify Right to Work Poster

Job Description Job Description: Assistant Service Manager Introduction: We are seeking a highly organized and detail-oriented individual to join our team as an Assistant Service Manager. The Assistant Service Manager will support the Service Manager in overseeing all aspects of our service department operations. This is a crucial position within the organization, ensuring efficient service delivery, maintaining customer satisfaction, and maximizing profitability. Responsibilities: 1. Support Service Manager: Assist the Service Manager in planning, organizing, and executing service activities to achieve department goals and objectives. Collaborate closely with the Service Manager to ensure the smooth functioning of the service department., 2. Customer Relationship Management: Communicate effectively and professionally with customers to understand their service needs and address any concerns. Provide exceptional customer service, demonstrating empathy and understanding to build positive relationships and exceed customer expectations., 3. Technical Expertise: Develop a comprehensive understanding of our products and services to efficiently troubleshoot and diagnose technical issues. Assist service technicians in resolving complex technical problems and provide guidance where necessary to ensure effective and timely resolutions., 4. Team Management: Supervise and support service technicians, assisting with skill development, providing feedback, and ensuring adherence to service standards and safety guidelines. Coordinate work schedules, manage technician time-off requests, and allocate resources effectively to efficiently handle service requests., 5. Documentation and Reporting: Maintain accurate records of service activities, including customer interactions, service requests, and warranty claims. Prepare detailed reports on service performance, identifying trends and areas for improvement. Provide regular updates to the Service Manager and other stakeholders., 6. Inventory Control: Assist in managing the inventory of spare parts, tools, and supplies necessary for service operations. Collaborate with procurement and warehouse teams to ensure adequate stock levels and minimize downtime for customers., 7. Performance Tracking: Monitor key performance indicators (KPIs) such as service response time, customer satisfaction, and technician efficiency. Identify opportunities for improvement and propose strategies to optimize workflow, reduce costs, and enhance productivity. Requirements: • Minimum high school diploma or equivalent; bachelor's degree in a relevant field is preferred., • Proven experience in a service-intensive environment, ideally within a similar industry., • Strong technical skills and ability to understand and troubleshoot complex technology., • Excellent organizational, time management, and multitasking abilities., • Exceptional communication and interpersonal skills., • Leadership qualities and the ability to motivate and guide a team., • Proficient in using computer software and systems to handle service-related tasks., • Ability to work independently and collaborate effectively with cross-functional teams., • A customer-first mindset with a commitment to delivering superior service. As an Assistant Service Manager, you will play a vital role in enhancing our customer satisfaction levels and ensuring the smooth operation of our service department. If you are a proactive individual with a passion for providing exceptional service and possess the necessary technical and managerial skills, we invite you to apply for this exciting opportunity.

Job DescriptionDetails: Posted: July 17, 2025 Level: Community College Professional 17, 12-month, Non-tenure track position. Hours: Full-time, 35 hours per week Closing Date: Open until filled, with priority consideration given to applicants who submit materials by 5:00pm (EST) on Wednesday, August 13, 2025 Location: CT State Tunxis 271 Scott Swamp Road, Farmington, CT 06032 This position is not remote For more information about CT State Community College and the campus please visit Home - CT State CT State Community College Mission: Connecticut State Community College provides access to academically rigorous and innovative education and training focused on student success. The college supports excellence in teaching and learning, makes data-informed decisions, promotes equity, and advances positive change for the students, communities and industries it serves. CT State Community College Vision: Connecticut State Community College is recognized for exceptional student success, educational leadership and transformative collaboration with business and industry, government, educational and key stakeholders while advancing diverse opportunities for Connecticut’s citizens and communities. CT State Community College Equity Statement: Connecticut State Community College commits to bold and disruptive change by actively identifying, naming, and dismantling structural racism, systemic poverty, and other barriers; establishing equitable and anti-racist policies and practices; and empowering students, faculty, staff, and administrators to advance racial, social, and economic justice. Our core collective responsibility is to continuously assess practices and policies and transform the world we live in by eliminating inequities. Anticipated Start Date: September 2025 Position Summary: The Community Colleges offer a wide variety of educational programs including two-year academic degree programs as well as technical and occupational programs. Among the programs are Advanced Manufacturing, Mechatronics Automation, LEAN Manufacturing, and Manufacturing Engineering Technology, which combine classroom, precision machining and fabrication training, and internship opportunities as components of the instruction model. The Manufacturing Technology Instructor teaches courses at a Community College in subject areas such as applied computer use, mathematics, blueprint reading and set up, calibration, and operation of complex machine tools. The Instructor provides both classroom lecture and “hands-on” precision machining instruction and may develop curriculum as needed to respond to workforce needs. Example of Job Duties: Under the direction of the Program Director or other administrator, the Advance Manufacturing Technology Instructor is accountable for providing beneficial learning opportunities for assigned students through effective performance in these essential functional areas: • Instruction planning and preparation., • Accountable for preparing course materials, syllabi and instruction outlines to address the learning needs of assigned students and for being appropriately prepared for lectures and shop demonstrations., • Classroom and shop instruction., • Accountable for delivering instruction that results in progressive student learning., • Student records., • Accountable for accurate, timely and useful recording and reporting of student performance., • Program planning, development, and oversight. This posting includes qualifications, experience and skills but is not limited to the full specifications stated in the job description. Minimum Qualifications: • High school diploma (or equivalent) from a public comprehensive high school or vocational technical high school and ten (10) or more years of manufacturing technology industry experience OR;, • Professional competence in the assigned advanced manufacturing subject disciplines., • Academic and practical instruction techniques and methodologies., • Experience in operating and maintaining manual manufacturing machines, including milling machines, lathes, and grinders., • Experience in setup, maintaining, operation, and programming of CNC manufacturing machines such as vertical machining centers and turning centers., • Experienced in component inspection techniques to ensure precision and quality in manufacturing processes. We offer a comprehensive benefits package to help you stay well, protect yourself and your family, and plan for a secure future. Benefits include generous leave policies; several retirement plans; and many choices for comprehensive health insurance. You also have access to many additional benefits to save for retirement, protect your family & more with supplemental benefits. Tuition reimbursement may apply if applicable. For more information, please visit our website at: CSCU - Human Resources - Future Employees. Application Instructions: To apply you must submit a cover letter and resume. The cover letter may be entered as text in the corresponding box, or it can be uploaded as a combined file with the resume. Incomplete applications or those submitted after the closing date will not be considered and links to other sources to view resumes are not acceptable. To apply via our website, visit . Selection Procedure: Following the closing date, application materials will be evaluated by a selection committee. Candidates selected for further consideration will be limited to those applicants who are best qualified based on the minimum and preferred qualifications and who have submitted all the required documents by the closing date and time listed on the job announcement. Candidates who have been selected and approved to interview will be contacted, and finalists will be recommended for further consideration by the Hiring Manager for final selection and recommendation for employment. The selection process may also include practical exercises (i.e., teaching demonstration and/or other written, technical, manipulative, or simulation exercises) to evaluate candidates' qualifications. Background Screening: All employment, if offered, is contingent upon proof of citizenship or employability under the requirement of the Immigration and Control Act (IRCA) and the successful passing of a background check, including granting permission to contact current and previous employers for verification. CSCU is committed to providing a safe campus community. Background investigations include reference checks, a criminal history record check and, when appropriate, a financial (credit) report or driving history check. Continuing Notice of Nondiscrimination CT State Community College does not discriminate on the basis of age, ancestry, color, national origin, gender identity or expression, genetic information, learning disability, marital status, intellectual disability, physical disability (including but not limited to blindness), present or past history of mental disability, prior criminal record, race, religious creed, sex (including pregnancy and sexual harassment), sexual orientation, retaliation for previously opposed discrimination or coercion, veteran status, victims of domestic violence, sexual assault, and/or trafficking or any other federal or state protected class in its employment, programs, and activities, unless the provisions of Section 46a-80(b) or 46a-81(b) of the Connecticut General Statutes are controlling or there are bona fide occupational qualifications excluding persons in one of the above protected groups. For information regarding the nondiscrimination, disability, and Title IX policies/procedures, contact: John-Paul Chaisson-Cardenas, Vice President for Diversity, Equity, and Inclusion, CT State Community College, 185 Main Street, New Britain, CT 06051, 860-612-7056 or . CSCC IS AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER. Powered by JazzHR UqrSlD6OBK

Job Description Epic Personnel Partners is actively hiring an AutoCAD Engineer for a specialty sheet metal fabrication facility Newington, CT. Pay Rate: $23–$34/hour (Depending on Experience) Schedule: Monday–Friday | Full-Time | 9:00AM-5:00PM Duties: The AutoCAD Engineer is responsible for creating precise fabrication layouts, interpreting technical drawings, and supporting production with detailed designs for various custom metalwork projects. This role plays a key part in ensuring accurate part production and efficient workflow within the sheet metal fabrication process. Responsibilities: · Create detailed layouts and part drawings using AutoCAD for custom sheet metal fabrication. · Read and interpret technical blueprints, shop drawings, and material specifications. · Collaborate with production teams to translate conceptual designs into actionable plans. · Ensure dimensional accuracy and proper fit-up of parts based on client specifications. · Support laser, bending, welding, and finishing operations by providing clear and accurate layout instructions. · Review and revise existing drawings and layouts as needed to optimize production efficiency. · Maintain organized records of drawings and layout files to support quality and traceability. Qualifications: · Experience with AutoCAD or similar CAD software (entry-level to advanced accepted). · Understanding of sheet metal processes, materials, and fabrication techniques. · Ability to read and interpret technical drawings and blueprints. · Attention to detail with a strong focus on accuracy and layout efficiency. · Excellent communication and collaboration skills with cross-functional teams. · Experience in any of the following areas is a plus: laser operation, press brake bending, welding, or finishing. · General computer literacy and file management for CAD documents. Benefits: · Weekly pay and referral bonuses. · Opportunities for on-the-job training and career advancement. · Clear pathways for promotion within the company. · Medical, dental, and vision coverage available. · Paid time off including vacation, sick leave, and holidays. If you have held any role such as AutoCAD Drafter, Sheet Metal Layout Technician, CAD Detailer, Mechanical Drafter, Fabrication Layout Specialist, Engineering Technician, or Sheet Metal Designer — we encourage you to apply! Company DescriptionEpic Personnel Partners, LLC, a woman-owned staffing firm based in Pleasanton, CA, specializes in building long-term relationships with clients, candidates, and employees. We address staffing challenges across industries by understanding your business and matching the right talent to your needs. Our placements with leading companies highlight our commitment to quality and results. What Sets Epic Apart? Epic prioritizes client success by listening, understanding challenges, and delivering tailored staffing solutions. Using cutting-edge technology, we connect you with top talent efficiently. Our process evaluates candidates not only on skills and experience but also on personality and fit, ensuring the right match for your team. With over 75 years of combined expertise, our team excels in full-cycle recruitment across various fields, including Administrative, IT, Call Center, Light Industrial, and Hospitality. For over two decades, we’ve successfully addressed talent needs, offering 24/7 support for last-minute or emergency requests. We don’t aim to be the biggest—just the best. Let’s work together to be Epic!Epic Personnel Partners, LLC, a woman-owned staffing firm based in Pleasanton, CA, specializes in building long-term relationships with clients, candidates, and employees. We address staffing challenges across industries by understanding your business and matching the right talent to your needs. Our placements with leading companies highlight our commitment to quality and results.\r\n\r\nWhat Sets Epic Apart?\r\n\r\nEpic prioritizes client success by listening, understanding challenges, and delivering tailored staffing solutions. Using cutting-edge technology, we connect you with top talent efficiently. Our process evaluates candidates not only on skills and experience but also on personality and fit, ensuring the right match for your team.\r\n\r\nWith over 75 years of combined expertise, our team excels in full-cycle recruitment across various fields, including Administrative, IT, Call Center, Light Industrial, and Hospitality. For over two decades, we’ve successfully addressed talent needs, offering 24/7 support for last-minute or emergency requests.\r\n\r\nWe don’t aim to be the biggest—just the best. Let’s work together to be Epic!

Job DescriptionDescription: About Us: Fischer Technology is a leading innovator and manufacturer of material analysis coating thickness measurement devices, delivering exceptional products and services to our customers. For over 70 years, we have built a reputation for providing industry with highly accurate and precise instrumentation. Our devices play a critical role in aerospace, durable goods, electronics, automotive, medical devices, green energy, and general manufacturing. As part of the Helmut-Fischer GmbH group, Fischer Technology’s diverse team of professionals work together to push the boundaries of measurement and meet the evolving needs of the manufacturing community. Position Overview: Our Service team has created new positions to accommodate continued sales growth. You will join a diverse, committed group of colleagues. The Field Service Engineer will maintain, repair, certify, and install Fischer X-ray fluorescence (XRF) equipment, hardness (nanoindentation), and Fischer’s line of Tactile test methods. This position will be based in the Windsor, CT, area and will support Fischer’s customers potential in the USA. Education and Experience: • Associate's degree in electronics, 2-year technician school certificate, or BS Degree., • A minimum of 2 years’ work experience troubleshooting electronic equipment., • Ability to travel, including overnight., • Capable of independent troubleshooting and system diagnostics with schematics and mechanical diagrams., • Familiar with typical electronic diagnostic test methods and equipment, including oscilloscopes, multimeters, etc., • Ability to work with standard hand tools, soldering equipment, etc., • Computer hardware and software skills., • Mechanical aptitude is essential., • Able to lift 50 pounds., • Clean driving record., • U.S. citizenship is required. Benefits: • Competitive salary, • 401(k), • Health and dental insurance Requirements: Key Responsibilities: Perform tasks associated with the testing and repair of X-ray equipment and other Fischer instruments. Alert the supervisor to any irregularities that could affect the instrument's quality, safety, or performance. Perform on-site instrument certifications. Perform installation and training of Fischer instrumentation. Travel approximately 80%, by car or air, to customer locations for installation and repair as needed. This percentage may vary based on the Technician’s station location. Interface directly with customers to provide telephone, email, and face-to-face product support. Perform all necessary paperwork and data entry for the Service department. Perform other duties as requested by the Service Manager.

Job DescriptionPosition: Quality Engineer Employee Type: Full-Time (1st Shift) The Quality Engineer will be providing all resources to meet statutory, regulatory and customer requirements. The Quality Engineer shall ensure that continuous improvement process is maintained. Responsibilities: • Develop inspection criteria for customer inspection requirements., • Control and keep up to date customer documentation revision changes., • Control and maintain External specifications to the latest revision levels. (material processes and specs), • Develop, implement & maintain corrective and preventive actions process for suppliers and customers., • Disposition of non-conforming material., • Supplier evaluation and rating., • Ensure that in-process inspection points have been established in the manufacturing plan., • Ensure accurate completion of customer survey forms or customer scorecards., • Review customer purchase orders for quality requirements., • Review purchase orders to suppliers for quality requirements including but not limited to flow down requirements., • Develop SPC plans for internal & customer key characteristics., • Prepare PPAP’s and PFMEA’s., • Submit deviations to the customer and follow up until close., • Review of internal processes including documentation., • Balloon drawings & other applicable customer documents and develop AS9102 inspection forms., • Support audits and visits including internal, supplier, customer, and 3rd party., • Perform other duties as assigned. Skills / Qualifications: • Must display excellent teamwork and problem-solving skills and have the ability to drive projects to completion., • Excellent verbal/written communication and presentation skills appropriate for direct interaction with customers., • Computer skills including using Microsoft office applications (Outlook, Word, Excel, PowerPoint, Teams & SharePoint)., • Preferred experience with Continuous Improvement including demonstrated success implementing Lean Manufacturing with visual management techniques., • Strong communication skills should be proficient in developing, organizing / arranging project information, and presenting to a range of audiences, • Must have experience presenting and making recommendations to Management. Benefits: • Comprehensive medical insurance plans including dental and vision, • Company paid insurance packages: life insurance, short-term disability, and long term disability, • 401k and HRA Funding, • Company paid apparel with dry cleaning, • Safety shoe vouchers, • Paid time off, paid holidays and paid floating holidays to accommodate our diverse work environment, • Employee Assistance Program, • Tuition reimbursement, • Continued education and professional development, • Company paid job training, • Family leave, • Employee discounts, • On-site Micro Market, • Company family picnic and holiday parties ABOUT US: Polamer Precision Inc., is a global aerospace manufacturing company specializing in complex aerospace engine components for demanding applications. We collaborate with clients to solve challenges in engineering and production. Polamer Precision's approach to aerospace manufacturing is vastly different than other sub-primes in the aerospace industry. We are a positive, forward-looking company with the future on our collective minds. Polamer Precision's efforts present a paradigm shift in terms of what can be accomplished with manufacturing in the United States. Our ability to maximize technological assets while empowering people with the latest tools enables us to compete on a global scale. Whether installing a megawatt solar array or acquiring the latest cutting-edge technology, we strive to improve every aspect of aerospace manufacturing on a daily basis. Innovation and dedication to new technology has resulted in a proven track record of surpassing expectations while consistently setting the bar for what can be accomplished in lean manufacturing. Our relentless pursuit to innovate is at the core of our principles. We have had unprecedented growth year after year with a current employee count of over 190+ and almost a billion-dollar backlog of business. TO LEARN MORE ABOUT POLAMER PRECISION, INC. PLEASE VISIT: The above statements are intended to describe the general nature and level of work being performed by the individual(s) assigned to this position. Management reserves the right to modify, add, or remove duties and to assign other duties as necessary. They are not intended to be an exhaustive list of all duties, responsibilities, and skills required. Polamer Precision, Inc. is proud to be an Equal Opportunity/Affirmative Action Employer M/F/D/V. We maintain a drug-free workplace and perform pre-employment substance abuse testing. Powered by JazzHR xC68Iixsi2

Job Description Join a Leading Surveying Firm with a Legacy of Excellence Control Point Associates is not your average surveying firm — we are a dynamic team committed to delivering exceptional surveying services. With over 30 years of experience in land surveying, we specialize in services like construction stakeouts, boundary surveys, and 3D laser scanning, serving industries such as construction, engineering, and land development. Our team is expanding, and we’re looking for an experienced Project Manager to join us in Central Connecticut. If you're a skilled Project Manager who thrives in a fast-paced, team-oriented environment, we want to hear from you! Why Control Point Associates? At Control Point Associates, we’re a team that focuses on doing great work and helping our employees grow. Here’s why joining us could be the perfect career opportunity for you: • 30+ Years of Expertise: We’ve earned a reputation for exceptional quality, precision, and dependability over three decades of service., • Cutting-Edge Technology: We utilize advanced tools like Trimble, Leica, and 3D laser scanners to ensure the highest standard of work., • Opportunities for Advancement: We invest in your career growth through ongoing training and certification programs., • Collaborative Team Culture: Our work environment promotes teamwork, where everyone contributes to achieving collective success., • Comprehensive Benefits: Enjoy medical, dental, and vision coverage, 401(k) matching, paid time off, and holiday breaks., • Diverse Work Experience: No two days are alike, with a mix of both field and office-based projects to keep your work dynamic and engaging., • Company Perks: Benefit from team lunches, weekly breakfast, holiday celebrations, and a fun, collaborative culture., • Supportive Work Environment: Your contributions are valued, and we prioritize your career development and growth. Essential Functions:, • Quality control of all survey documents, including survey plans, record plots, metes and bounds descriptions, review of title commitment reports and construction layout services., • Provide weekly progress and status reports on project deliverables to all project stakeholders and management team., • Responsible for administering surveying activities which includes oversight of staff, technical resources, and client communication for multiple projects., • Prepare and execute quality control reviews, safety and quality assurance procedures., • Effectively convey our Integrated Business Model in both written and verbal business development discussions and create/maintain our strong presence and leadership in the market and beyond., • Initiate and participate in business development activities to partner with new and existing clients., • Continually seeks opportunities to increase client satisfaction and deepen client relationships., • Monitor project budgets and accountability for project profitability; prepare and review project billing reports for monthly invoicing; work with accounting department on account collections., • Staff development, contract preparation, know your numbers and be accountable for them., • Champion our brand, our values and our culture with your positive attitude, dress and demeanor, • Exemplify the highest level of commitment, positively work the hours needed., • Other duties as assigned. Knowledge, Skills, and Abilities:, • Minimum of 8 years of survey experience., • Licensed Land Surveyor preferred., • Proven track record of business development and leadership., • Bachelor's Degree preferred., • Proficient in AutoCAD Civil 3D., • Ability to relate to clients and people at all levels of the organization., • Must possess excellent communication, diplomacy and listening skills; specifically, be accessible and responsive to the needs of clients., • Ability to read, analyze, and interpret drawings and the most complex documents., • Ability to operate a computer, using technical software and other applications., • spreadsheets, and other business software., • Driven to succeed. Physical Requirements:, • Prolonged periods sitting at a desk and working on a computer. Compensation and Benefits: • Pay Range: $100,000-$150,000+ annually depending on experience, licensure, and geographic location., • Additional Benefits: Health, dental, and vision insurance, life insurance, 401(k) match, paid time off, and more. Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group. Powered by JazzHR fGJrOh4UZm

Job Description The Educational Funding Assistant (EFA) is responsible for assisting prospective and current students in FAFSA completion. In addition, the EFA will schedule primary financial aid appointments with EF staff at appropriate campus. The EFA works with the highest integrity and ethics adhering to state, federal, and Porter and Chester policies and regulations. The Educational Funding Assistant will… • Generate lists of prospective students needing to complete the FAFSA through school’s student database, • Reach out to prospective students who need to complete Federal Student Aid Identification (FSA ID) and FAFSA, • Assist applicants in creating FSA ID and completing FAFSA, • Schedule primary financial aid appointment for prospective students with Educational Funding Specialists, • Contact and assist currently enrolled students to update and finalize FAFSA required paperwork, • High School Diploma or GED required, • Minimum 1 year of experience completing Free Application for Federal Student Aid (FAFSA) preferred, • Detail-oriented with strong organizational skills, • Clear and effective communicator (verbal and written), • High comfort level within a computerized environment Porter and Chester Institute, a trade school in Connecticut and Massachusetts for 75 years, adheres to one basic vision: to educate and train our students to the level that will make them competent employees. With 9 campus locations throughout Connecticut and Massachusetts, we offer training in such trades as Automotive Technology, HVAC-R, CAD, Electrician, Plumbing, as well as Medical Assisting, Dental Assisting, Practical Nursing and Computer & Technology. Our support staff, including Admissions, Financial Aid and other administrative professionals, to our qualified Instructors are focused on making the students' experience a fulfilling and enriching one, both professionally and personally. Click here for more company information: We are an Equal Opportunity Employer. Mon-Fri 9am-1pm

Job Description Dated: 06/09/2021 JOB DESCRIPTION POSITION TITLE: Intake/Certification Specialist (898A) DEPARTMENT: Energy FLSA STATUS: Non-Exempt REPORTS TO: Assistant Program Manager Energy Services GENERAL DESCRIPTION OF DUTIES The purpose of this position is to support the Agency’s needs by scheduling customer appointments, conducting customer intake and performing tasks necessary to ascertain customer eligibility per program guidelines. Based on CRT’s Steps to Success service delivery model, the Intake/Certification Specialist also provides customers with application assistance for and referrals to agency and community resources. SPECIFIC DUTIES AND RESPONSIBILITIES ESSENTIAL JOB FUNCTIONS The list of essential functions, as outlined herein, is intended to be representative of the tasks performed within this classification. It is not necessarily descriptive of any one position in the class. The omission of an essential function does not preclude management from assigning duties not listed herein if such functions are a logical assignment to the position. • Responds to all emergency cases within 24 hours of customer inquiry., • Responsible for responding to all non-emergency customer inquiry as stipulated in program guidelines., • Schedules and reschedules customer intake appointments, as needed., • Provides quality customer service., • As assigned, conducts customer intake and reviews customer application and accompanying documentation for accuracy and completeness and to ensure service eligibility as outlined in program rules and regulations., • Maintains orderly customer paper files in accordance with program requirements, • Demonstrates proficiency in the use of available technology to maintain accurate computer-based files in accordance with agency and program requirements., • Refers customers to internal and external resources in support of comprehensive attention to customer need., • Processes energy applications using DSS procedural instructions., • Process energy applications per CRT’s Quality Assurance procedures., • Prepares program reports in accordance with program requirements and agency need., • Possesses excellent oral and written communication skills that demonstrate the ability to communicate with persons of varying racial/ethnic and socio-economic cultures., • Attends courses, professional workshops/training, seminars and/or participates in self-directed studying that will provide for continuous professional growth related to this position., • Obtains/maintains valid certifications to sharpen and refresh job skills., • Performs outreach services and participates in community events and/or conducts community education sessions., • Maintains daily activity log. ADDITIONAL JOB FUNCTIONS • Responds to supervisor, upper management and program funder requests for information as requested., • Some in-state travel may be required., • Performs all other duties as assigned. MINIMUM TRAINING ANDEXPERIENCE Education: Associate’s Degree in human services or related field from an accredited two year college or university preferred. A high school diploma and work experience may be substituted for a college degree. Demonstrated Skills: The ability to manage time in a fast-paced environment and accomplish job responsibilities under minimum supervision. Experience with non-profit or community volunteering. Must have strong listening, oral and written communication skills. Bilingual: English/Spanish preferred. Driving Required: Preferred Agency Vehicle: No Employee’s Own Vehicle: Preferred ADA COMPLIANCE Physical Ability: Tasks involve the ability to exert very moderate physical effort in light work, typically involving some combination of stooping, kneeling, crouching and crawling, and which may involve some lifting, carrying, pushing and/or pulling of objects and materials of moderate weight (12-20 pounds). Sensory Requirements: Some tasks require visual perception and discrimination. Some tasks require oral communications ability. Environmental Factors: Tasks are regularly performed without exposure to adverse environmental conditions, such as dirt, dust, pollen, odors, wetness, humidity, rain, fumes, temperature and noise extremes, machinery, vibrations, electric currents, traffic hazards, animals/wildlife, toxic/poisonous agents, violence, disease, or pathogenic substances. Acknowledgment Signature indicates agreement with contents herein as being an accurate description of position duties and responsibilities. EMPLOYEE PRINTED NAME EMPLOYEE SIGNATURE DATE Signature indicates agreement with contents herein as being an accurate description of position duties and responsibilities. IMMEDIATE SUPERVISOR PRINTED NAME IMMEDIATE SUPERVISOR SIGNATURE DATE Community Renewal Team, Inc. is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, Community Renewal Team will provide reasonable accommodations to qualified individuals with disabilities and encourages both prospective and current employees to discuss potential accommodations with the employer. Monday-Thursday 9a-5p with a Saturday from 8am - 4pm at 395 Wethersfield Ave Hartford, CT.

Job Description Join Midstate Radiology Associates (MRA) as a Per Diem, Ultrasound Technologist at our Multiple Locations. Position Schedule: as needed (weekdays/weekends, 1st, 2nd, 3rd shifts) Compensation: MRA offers competitive starting compensation based on qualifications and experience. The compensation range for this position is: Min: $31.00 | Mid: $42.50 | Max: $54.00 + competitive shift differentials (12%-50% of base rate). Job Summary: Schedules patients and operates equipment to perform diagnostic medical sonograms in accordance with protocols in order to assist the physician in diagnosis and treatment. Follows established policies and procedures set by the department, hospital, state, ACR, TJC, and OSHA. Key Accountabilities: • Performs ultrasound diagnostic procedures by selecting appropriate transducers and correct scanning sequences to produce an accurate image to assist the radiologist in the diagnosis., • Assesses physician’s order for completeness by reviewing the requisition and patient’s chart to ensure correct examination is performed the first time., • Establishes the testing schedule by prioritizing requests for procedures so that critically ill patients are treated and appropriate physician and staff levels are available., • Performs and documents quarterly quality assurance tests on equipment by following established professional protocols as required by TJC and to maintain integrity of the system., • Participates in invasive radiological procedures by assisting the radiologist in performing the procedure and producing images in order to provide therapeutic and diagnostic services., • Maintains the ultrasound equipment in good operating order. Clean and disinfect equipment and area after each use. Maintain work area in an orderly manner. Report any hazardous conditions or equipment breakdowns to supervisor., • Demonstrates yearly competencies, including knowledge and behaviors, to conduct examinations and meet the needs of patients with regard to the patient’s age, condition or other special requirements., • Routinely prepare examination for interpretation by the radiologist to include correct identification and processing. Set up images in PACs system. Accurately inputs data in the RIS by tracking actual procedure in order to capture all charges and other relevant information for patient billing and to determine department resource allocation, billing and inventory., • Possess computer skills appropriate to meet departmental needs in preparation of reports and correspondence., • Works effectively as a team member within the department and with other units to provide quality service through communication, cooperation and collaboration. Provides clinical supervision and instruction to students by maintaining and understanding of policies, procedures, and the clinical competency process (in order to evaluate student growth and competence in performing radiographic procedures). Qualifications Guidelines: Education Required: • High school diploma or equivalent., • Registered or registry eligible with American Registry of Diagnostic Medical Sonographers(ARDMS), • CPR certification may be required., • Maintenance of continuing education credits as required by licensure., • Graduate AMA approved ultrasound program., • At least one year’s experience as an ultrasound technologist, • Working knowledge applicable to ultrasound technology with specific references to anatomy, medical and surgical disease, and scientific principles as applied to ultrasound technology., • Patient care standards and requirements., • Quality assurance principles and practices., • Customer service principles and practices., • OSHA principles and practices., • Operate ultrasound equipment., • Schedule, organize and monitor patient flow to meet company productivity, quality, health and safety standards., • Communicate effectively with patients, relatives, medical staff and co-workers., • Maintain the confidentiality of patient records., • Schedule, organize and complete work in accordance with required workloads., • Read, interpret and follow internal quality standards and government regulations., • Understand and follow specifications and instructions., • Ability to react calmly and effectively in emergencies. ARDMS required within 12 months of hire. May be required to rotate on night, weekend and/or holiday call schedule. May be required to cover ancillary offices, as needed. OSHA Class 1 exposure to Bloodborne Pathogens. May involve physical lifting and/or walking. Our team at Midstate Radiology Associates benefits from a diverse workforce and we welcome anyone to apply: Midstate Radiology Associates is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. To learn more about Midstate Radiology Associates, including more information on employee benefits and our company culture, please visit our website: . Position Schedule: as needed (weekdays/weekends, 1st, 2nd, 3rd shifts)

Job Description Job Summary: The person will be assembling diesel engine test and prototypehardware along with running tests on that hardware in our engineering lab. Thisrole does not require any degrees, but any certificates or degrees are a plus.The manager is looking for a candidate with at least two years of experiencewith automotive and diesel truck engines. Key Responsibilities: • Modify, test, and repair machinery and equipment as directed by engineering staff., • Prepare part sketches and create work orders and purchase requests for fabrication by outside contractors., • Draft detailed drawings or sketches for drafting room completion or in-house fabrication., • Review project instructions, blueprints, and specifications to determine test parameters and procedures., • Identify and resolve technical problems such as redesigns and assembly challenges., • Discuss and coordinate design changes, manufacturing methods, and drafting techniques with engineering staff., • Inspect drawings for clarity and accuracy, ensuring corrections are made as needed., • Mechanical assembly skills with both small and large components using hand tools., • Basic computer proficiency and strong written and verbal communication skills., • Some basic computer skills and communication/ writing skills. Mechanical assembly skills with both small and largerparts and components using hand tools. Education: Associate degree in Engineering Technology or a related field preferred. Equivalent work experience will be considered. Experience: The manager is looking for a candidate with at least two years of experience with automotive and diesel truck engines. Company DescriptionCompunnel Inc., established in 1994; is a leading provider of Staffing, IT/Software, e-Learning/Training, Business Intelligence, and Cloud Solutions. A leader in contingent and permanent workforce solutions, we also provide temp-to-hire staffing, project-based/SOW staffing, and payroll services to our esteemed clientele which includes Fortune 500 companies of diverse industry segments. Ranked as one of the largest staffing firms in the US which is our primary service market; we also have a significant presence in Europe and Asia. As a national service provider in the US, we are serving our customers all major states and regions; thereby generating numerous job opportunities for prospective employees in their preferred locations of choice. We have witnessed multi-fold YOY growth, and continuously adding a large pool of talented resources to our employee base every year. Our extensive experience in hiring professionals of multiple in-demand skill sets (IT, Engineering, Healthcare, Admin-Clerical, Finance, Professional, Light Industrial, etc.) further makes Compunnel a wider and preferred platform for people to pursue their careers in the US. We welcome people from all walks of life and cultures, and we support workforce diversity by providing equal employment opportunities to people without any discrimination based on race, color, gender, religion, national/ethnic region, disability, or any other basis.Compunnel Inc., established in 1994; is a leading provider of Staffing, IT/Software, e-Learning/Training, Business Intelligence, and Cloud Solutions. A leader in contingent and permanent workforce solutions, we also provide temp-to-hire staffing, project-based/SOW staffing, and payroll services to our esteemed clientele which includes Fortune 500 companies of diverse industry segments. Ranked as one of the largest staffing firms in the US which is our primary service market; we also have a significant presence in Europe and Asia. As a national service provider in the US, we are serving our customers all major states and regions; thereby generating numerous job opportunities for prospective employees in their preferred locations of choice.\r\n\r\nWe have witnessed multi-fold YOY growth, and continuously adding a large pool of talented resources to our employee base every year. Our extensive experience in hiring professionals of multiple in-demand skill sets (IT, Engineering, Healthcare, Admin-Clerical, Finance, Professional, Light Industrial, etc.) further makes Compunnel a wider and preferred platform for people to pursue their careers in the US. We welcome people from all walks of life and cultures, and we support workforce diversity by providing equal employment opportunities to people without any discrimination based on race, color, gender, religion, national/ethnic region, disability, or any other basis.

Job DescriptionAbout LiquidPiston LiquidPiston is a technology-driven engineering company developing advanced rotary engines based on a new thermodynamic cycle. Our team of ~40 engineers and professionals are solving some of the most challenging problems in propulsion today. We’re seeking a skilled and motivated IT Manager / Network Systems Engineer to become a “one-person IT department” for our fast-paced and innovative team. This role is ideal for someone who thrives in an independent, hands-on environment and enjoys both strategic IT planning and tactical daily support. Key Responsibilities • Design, implement, and maintain robust IT infrastructure for a hybrid Windows and Linux environment, • Install, configure, and upgrade servers, routers, switches, access points, and critical software, • Support and troubleshoot desktop, network, and user issues across the organization, • Collaborate with executive leadership to identify, procure, and deploy IT assets and services, • Ensure compliance with cybersecurity standards, including NIST 800-171 and CMMC 2.0, • Implement and support security best practices, data protection measures, and backups, • Maintain and upgrade physical and virtual servers, workstations, and endpoint devices, • Setup and support Microsoft 365, Exchange, Active Directory, DNS, SSO, and file sharing, • Support licensing and network performance for engineering software (SolidWorks, ANSYS, MATLAB)Required Qualifications, • BS in IT, Computer Science, or related field (MS preferred), • 5+ years of hands-on experience managing IT systems and infrastructure, • Strong experience with both Linux and Windows Server environments, • Proficiency with scripting and automation (e.g., Ansible), • Deep understanding of network compartmentalization, encryption, and authentication standards, • Experience with NIST 800-171 / CMMC 2.0 implementation and compliance, • Expertise with Microsoft 365, Exchange, Active Directory, DNS, and SSO, • Demonstrated ability to independently manage IT operations in a small-company settingPreferred Qualifications, • Certifications such as CCNA or equivalent networking credentials, • Experience setting up and managing High-Performance Computing (HPC) environments, • Familiarity with containerization (Docker, Kubernetes) and DevOps practices, • Hands-on experience with MySQL and relational database management, • Python skills for scripting, automation, or data-related tasks (e.g., Pandas, SciKitLearn, SQLAlchemy), • Exposure to Machine Learning / Data Science infrastructure, • Familiarity with N8N or similar workflow automation toolsBenefits & Perks, • Flexible PTO: We value work-life balance and encourage time to rest and recharge., • Health & Wellness: Comprehensive medical, dental, and vision coverage—you choose what works best for you., • Equity Participation: Permanent employees receive RSUs (Restricted Stock Units)., • 401(k) Match: We offer a 401k w/100% matching up to 3% of your salary and then 50% of contributions between 3-5% Powered by JazzHR WEdLBjAynR

Job DescriptionDirector of Information Technology Location: Bloomfield, CT | Fully on-site About LiquidPiston LiquidPiston is a technology-driven engineering company developing advanced rotary engines based on a new thermodynamic cycle. Our team of ~40 engineers and professionals are solving some of the most challenging problems in propulsion today. We’re seeking a Director of IT who is both a strategic leader and a hands-on technologist. This is not a “desk-only” management role - it’s ideal for someone who enjoys being in the trenches building, maintaining, and securing systems while also setting the company’s long-term IT vision. You will be the technical authority and owner of LiquidPiston’s IT infrastructure, cybersecurity posture, and technology roadmap. Key Responsibilities • Own and evolve LiquidPiston’s IT infrastructure - from servers to switches - ensuring high availability, performance, and security across a hybrid Windows/Linux environment., • Design, deploy, and maintain critical systems including servers, routers, firewalls, VPNs, and cloud-based services., • Provide hands-on support for desktops, networks, and user issues, ensuring minimal downtime and maximum productivity for a team of engineers and professionals., • Partner with executive leadership to define IT strategy, budgets, and priorities aligned with business goals and compliance requirements., • Implement and maintain cybersecurity frameworks, including NIST 800-171 and CMMC 2.0; lead audits and ensure continuous compliance., • Oversee and participate in network segmentation, authentication, encryption, and access control initiatives., • Manage and support Microsoft 365, Exchange, Active Directory, DNS, SSO, and file-sharing systems., • Optimize engineering software performance and licensing (SolidWorks, ANSYS, MATLAB, etc.)., • Automate and streamline IT operations and deployments using scripting and configuration management tools (e.g., Ansible, PowerShell, Python)., • Mentor and scale the IT function as the company grows — defining processes, selecting tools, and potentially building a small team in the future.Required Qualifications, • BS in Information Technology, Computer Science, or related field (MS preferred), • 7+ years of progressive, hands-on IT infrastructure and systems management experience, • Proven ability to manage both Windows and Linux server environments, • Strong networking background - routers, switches, VLANs, VPNs, firewalls, Wi-Fi, • Solid grasp of cybersecurity principles, NIST 800-171, and CMMC 2.0 compliance, • Proficiency with Microsoft 365, Exchange, Active Directory, DNS, and SSO, • Experience with scripting and automation (e.g., Ansible, PowerShell, Python), • Excellent problem-solving skills and ability to operate independently in a fast-paced environmentPreferred Qualifications, • Certifications such as CCNA, CISSP, or equivalent networking/security credentials, • Experience with High-Performance Computing (HPC) or GPU-based systems, • Familiarity with Docker, Kubernetes, and DevOps methodologies, • Hands-on experience with MySQL or other relational databasesBenefits & Perks, • Flexible PTO: We value work-life balance and encourage time to rest and recharge., • Health & Wellness: Comprehensive medical, dental, and vision coverage—you choose what works best for you., • Equity Participation: Permanent employees receive RSUs (Restricted Stock Units)., • 401(k) Match: We offer a 401k w/100% matching up to 3% of your salary and then 50% of contributions between 3-5% G7fu8Mgmos