Trabajos electronics en Tampa, FloridaCrear alertas

Through extensive Army National Guard training, experience, and some additional study, you may be eligible for Electronics Technician Association (ETA) certification. In the Army National Guard, you will learn these valuable job skills while earning a regular paycheck and qualifying for tuition assi

Job Description Job Overview The Quality Control Inspector 2 is responsible for assisting with ensuring the integrity, safety, and compliance of unmanned aerial systems (UAS) and sub-systems. Operating within a dynamic production environment, this role focuses on assisting with functional testing and system validation using Mission Planning Software (MPS) and ground control station (GCS) tools. The inspector will perform hands-on quality inspections of UAS platforms and subsystems to verify system integration, configuration accuracy, and mission-readiness in accordance with AS9100 and ISO 9001 quality standards. Essential Functions • Conduct visual, dimensional, and functional inspections of components, subassemblies, and assemblies, including composite and additively manufactured parts, using approved inspection tools and methods., • Verify conformance of products to engineering drawings, specifications, wiring diagrams, and work instructions across receiving, in-process, and final inspection phases., • Execute software configuration checks and validate system build states using Ground Control Station (GCS) tools and Mission Planning Software as directed., • Accurately complete inspection reports, travelers, checklists, and non-conformance records in accordance with internal quality documentation procedures., • Ensure compliance with defined inspection criteria and tolerances, escalating any deviations or quality issues to the Quality Control Supervisor., • Support root cause analysis by providing detailed defect documentation and participating in corrective action processes when required., • Maintain part traceability through accurate documentation of serial numbers, lot codes, and process records in accordance with configuration management plans., • Perform calibration verification checks on basic inspection and measurement equipment prior to use, and report discrepancies per QMS procedures., • Apply relevant inspection standards such as AS9102 First Article Inspection, IPC-A-610 (Acceptability of Electronic Assemblies), and J-STD-001 (Soldered Electrical and Electronic Assemblies)., • Participate in regular training and certification activities to maintain technical inspection qualifications and support continuous improvement initiatives., • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices., • Proficient understanding of electrical, mechanical, and software subsystem integration., • Proficiency with mission planning software for testing and evaluation of ArduPilot based systems., • Ability to read and interpret aero-mechanical drawings (GD&T preferred), electrical harness drawings, integration block diagrams, and composite/3D printing specifications., • Knowledge of quality management system standards such as ISO 9001/AS9100, with a focus on control of nonconforming material and record retention., • Strong attention to detail and organization, as well as rigorous documentation in accordance with DoD programs of record., • Familiarity with SPC, common root cause analysis tools, and continuous improvement practices preferred., • Required: High school diploma or GED., • Preferred: Associate degree or vocational training in Electronics, Avionics, Aerospace Technology, or a related technical field., • 3+ years of industry experience in a manufacturing or production environment, quality specific role preferred., • Previous experience with CubePilot ecosystem, RFD telemetry, and GNSS/RTK modules is a plus preferred. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: • Frequently required to sit, and to reach to use computers and other office equipment, • Occasionally required to stand for extended periods of time Security Clearance AEVEX Aerospace is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws. About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits for qualified employees. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Advantage Solutions’ READY Program is a strategic initiative to build a strong internal pipeline of future Advantage leaders through robust learning experiences and impactful career development opportunities. The READY Program Teammate position is an important investment in developing future leaders who are strategic, innovative, insight-driven, and customer focused. This 24‐month program immerses teammates in a series of structured, rotational assignments across four key Branded Services teams— Retail, Analytics/Insights/Operations, Headquarter Sales, and Business Development—ensuring they gain comprehensive, cross-functional expertise. With a comprehensive development plan that includes actionable on-the-job and structured learning, Executive Mentorship, career coaching, and networking, the position develops leaders with organizational savvy, business acumen and leadership skills, who can drive long-term business success. Job Will Remain Open Until Filled Responsibilities/Qualifications The Company is one of North America’s leading sales and marketing agencies specializing in outsourced sales, merchandising, category management, and marketing services to manufacturers, suppliers, and producers of food products and consumer packaged goods. The Company services a variety of trade channels including grocery, mass merchandise, specialty, convenience, drug, dollar, club, hardware, consumer electronics, and home centers. We bridge the gap between manufacturers and retailers, providing consumers access to the best products available in the marketplace today. Essential Responsibilities Retail Rotation • Develop and maintain strong relationships with retail decision makers, retail personal and client representatives., • Execute strategic retail partnerships needs and client initiatives to drive sales growth., • Analyze market data, competitive activity and business trends to develop retail sales strategies Analytics, Insights, and Operations Rotation • Develop actionable insights and recommendations utilizing a broad range of data metrics, tools, and analytics to influence customer engagement strategies., • Develop engaging, insight driven, customer facing presentations that effectively communicate findings, actionable tactics and strategies., • Master data visualization tools and various software platforms to strengthen business recommendations and business process efficiencies. Headquarter Sales Rotation • Forecast, design, and conduct business and financial models for client promotional trade plans., • Analyze and develop insights using multiple data sources to identify business opportunities., • Collaborate with Key Account Managers and Category Leadership teams to build compelling selling presentations to achieve client’s business objectives., • Provide strategic input into client’s annual business plan adding fact-based insights and solutions to achieve client’s objectives. Business Development Rotation • Own and manage Customer Relationship Management (CRM) strategy, ensuring data is leveraged effectively for business development., • Utilize CRM to gather data, insights and reports for monthly Senior Leadership Pipeline review meetings., • Identify and prioritize new business opportunities by analyzing industry and business trends, developing insights and mastering tools like; LinkedIn, Circana and Nielsen, • Perform comprehensive new business research and new Client Discovery/Intake meetings to identify quality new clients and business opportunities., • Support new business RFP process and preparation/presentation development for new client meetings. READY Leadership Curriculum and Training • Train READY team on Industry, client and customer knowledge, • Collaborate with READY team to develop and present business opportunities to Senior Leaders, • Complete cross-functional project work to understand company organization, strategies, client services and business objectives. Supervisory Responsibilities Direct Reports • This position does not have supervisory responsibilities for direct reports Indirect Reports • This position does not have guidance or mentoring responsibilities for indirect reports Travel and/or Driving Requirements • Travel and Driving are not essential duties or functions of this job Education Level: (Required): Bachelor's Degree Education Level: (Required): Bachelor's Degree Candidate must have completed their undergraduate degree between May 2025 and May 2026) (Minimum of 1 year of internship and/or professional work experience required) 1+ Years of experience Consumer Packaged Goods Industry (CPG) Internship and/or college curriculum/major in Food/Beverage/Marketing/Category Management a plus Skills, Knowledge and Abilities • Strong written and verbal communication skills, • • Strong computer skills including proficiency with Microsoft Teams, Outlook, PowerPoint, Excel and Word, • • Strong ability to develop and deliver virtual and in-person presentations to all audience types, • • Willingness to engage and build relationships with a variety of internal and external leaders, clients and retail partners, • • Collaboration and Team building Skills, • • Ability to work independently using strong prioritization and time management skills to meet deliverables, • • Ability and willingness to operate in a fast-paced and changing work environment Office / Sedentary Requirements: Incumbent must be able to perform the essential functions of the job. Work is performed primarily in an office environment. Typically, requires the ability to sit for extended periods of time (66%+ each day), ability to hear telephone, ability to enter data on a computer and may require the ability to lift up to 10lbs. During retail rotation, incumbent must be able to stand extended periods of time and the ability to lift up to 20 lbs. Additional Information Regarding Job Duties and Job Descriptions Job duties include additional responsibilities as assigned by one’s supervisor or other manager related to the position/department. This job description is meant to describe the general nature and level of work being performed; it is not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required for the position. The Company reserves the right at any time with or without notice to alter or change job responsibilities, reassign or transfer job positions, or assign additional job responsibilities, subject to applicable law. The Company shall provide reasonable accommodations of known disabilities to enable a qualified applicant or employee to apply for employment, perform the essential functions of the job, or enjoy the benefits and privileges of employment as required by the law. Important Information The above statements are intended to describe the general nature and level of work being performed by people assigned to this position. They are not intended to be an exhaustive list of all responsibilities, duties, and skills required of associates so classified. The Company is committed to providing equal opportunity in all employment practices without regard to age, race, color, national origin, sex, sexual orientation, religion, physical or mental disability, or any other category protected by law. As part of this commitment, the Company shall provide reasonable accommodations of known disabilities to enable an applicant or employee to apply for employment, perform the essential functions of the job, or enjoy the benefits and privileges of employment as required by law.

Job ID: 387630 Practice area:- IP - Patent - Electrical Engineering Patent Prosecution Associate Attorney (1–5 Years Experience) – Electrical Engineering | Tampa, FL Keywords: Litigation Associate Attorney, General Litigation Attorney, Patent Prosecution Attorney, IP Attorney Electrical Engineering, Patent Attorney Tampa, Tampa legal jobs, Attorney jobs Florida, State Bar required, Law firm patent associate, Partner-track position, lawyer A top-tier law firm is seeking a Patent Prosecution Associate Attorney in Tampa, FL. Work on cutting-edge electronics innovations, develop patent strategies, and grow within a nationally recognized IP practice with strong mentorship and advancement opportunities. This distinguished law firm has a 121-year history of serving clients with the utmost quality of work. Based in Chicago, Illinois; this firm is one of the 200 largest law firms in the United States. The firm's practice areas include environmental, health law, corporate services, litigation and dispute resolution, real estate, tax, immigration, labor and employment, trusts and estates and technology law. A nationally recognized law firm is seeking a Patent Prosecution Associate Attorney to join its Intellectual Property group in Tampa, Florida. This firm has a long-standing reputation for excellence and a broad national platform, offering attorneys the opportunity to work on sophisticated IP matters across a wide range of industries. The role focuses on patent prosecution for electronics-related inventions and provides direct client interaction and strategic involvement. This opportunity is ideal for an IP-focused Litigation Associate Attorney or Patent Attorney with a technical background who is seeking to build a long-term career in a partner-track position. This role is actively interviewing, and opportunities in Tampa legal jobs at this level are limited. Key Responsibilities • Conduct patent prosecution for electronics and technology-related inventions, • Draft, review, and file patent applications with the U.S. Patent and Trademark Office, • Collaborate with clients to develop and execute patent protection strategies, • Provide legal advice on intellectual property matters, including patentability and portfolio management, • Communicate with examiners and respond to office actions, • Support broader IP initiatives within a national practice Qualifications • 1–5 years of experience as a Patent Prosecution Associate or IP Attorney, • Strong background in electrical engineering or related technical field, • Admission to a state bar (State Bar required), • Admittance to the U.S.P.T.O. preferred, • Strong academic credentials and commitment to professional growth, • Experience drafting and prosecuting patent applications is preferred Education • Undergraduate degree in Electrical Engineering or a closely related field, • Juris Doctor (JD) degree from an accredited law school Certifications • Admittance to the U.S.P.T.O. preferred Skills • Excellent analytical and problem-solving abilities, • Strong written and verbal communication skills, • Attention to detail and strong organizational skills, • Ability to work collaboratively in a team environment Culture & Firm Appeal This firm is known for its long-standing history, national presence, and commitment to delivering high-quality legal services. Attorneys benefit from a collaborative and inclusive culture that encourages professional development and innovation. The firm’s broad practice areas and diverse client base provide meaningful opportunities to expand expertise and build a rewarding career. With a reputation for excellence and stability, it stands out among Tampa legal jobs. Why This Role Is Unique • Opportunity to work on cutting-edge technology and electronics innovations, • Direct client interaction and strategic involvement in patent portfolios, • Strong mentorship and professional development within a national IP practice, • Clear advancement path within a partner-track position, • Ideal for attorneys seeking to combine technical expertise with legal practice Benefits • Paid time off, • Health, vision, and dental insurance, • 401(k) plan, • Life and disability insurance Call to Action Apply now for a confidential discussion with a BCG Attorney Search recruiter. Submit your resume today to explore this exciting opportunity in Attorney jobs Tampa. Take the next step in your intellectual property career with a leading firm. BCG Attorney Search is the industry leader for placing candidates in permanent positions in law firms. Since 2000, our recruiters have placed several thousand attorneys and enjoyed extraordinarily high success rates with our candidates. As a BCG Attorney Search candidate, you have access to more opportunities than any legal placement firm in the United States. We are able to offer the most in-depth insight in the legal recruiting market thanks to our dedicated team of over 150 employees who mercilessly research, study and analyze the legal market. The depth and breadth of our research empowers us to place attorneys at rates that are unparalleled at any placement firm in the United States. Many of our recruiters make 30 to 40 placements per year, while recruiters at competitor firms are likely to make four or five. Unlike other placement firms that can only tell you about openings at major AmLaw firms, we place candidates of all backgrounds in firms of all sizes. While other legal recruiters only represent a narrow band of candidates from top law firms and top law schools, our research, firm contacts, and market insight allow us to place hundreds of candidates each year who do not fit this mold. It is rare that we do not get candidates we represent interviews and offers. No one in the world is better at legal recruiting and placement than BCG Attorney Search. BCG Attorney Search will confidentially review your application and will not forward your materials to the firm without first discussing the opportunity with you.

Location: Tampa, FL Field Service/Installation Technician at Benco Dental At Benco Dental, our company is our family, and we are looking for a new addition to assist us in Driving Dentistry Forward. Please review the description below carefully to ensure that this position is the perfect match for you! What's in it for YOU? * Excellent Compensation Packages * Medical, Dental and Vision Benefits Effective on Day 1 * 401k Package, Paid Time Off Program, and Profit Sharing * Associate Discounts and Community Giveback Programs * College Tuition Savings Program * Caring Family Culture Toward all Associates * Certified as a FORTUNE Great Place to Work * Opportunities to Build a Better Benco through Diversity and Inclusion Resource Groups * Family owned for 90+ years Position Summary: The Field Service/Installation Technician is a vital part of our company providing hands-on support to our customers. Service Technicians are independent team players who want to be customer focused. As the Service Technician, you will offer solutions to our clients that extend beyond repairs and maintenance to exemplify our number one goal: driving dentistry forward. Benco Dental offers service technicians career development and will provide a strong sense of accomplishment. Do YOU Possess These Skills and Attributes? * Computer proficiency, including knowledge of Windows-based programs * Organizational skills * Problem solving skills * Exceptional communication skills No Bio-Medical (dental) Device repair experience? No problem! Other relevant experience includes: * Mechanical or Technical experience/education * Electrical, Customer service, Military, or Software/hardware experience * Pneumatics * HVAC Do These Responsibilities Interest YOU? * Providing maintenance and repair services out in the field * Training staff on using equipment * Training customers on using equipment Do YOU Meet These Requirements? * High School Diploma or equivalent * Valid driver's license and clean driving record (Required) * Technical training in the bio-medical or electronics field (Preferred) * Physical: * Routine walking, bending, kneeling, and squatting, sitting, standing, reaching, and twisting * Must frequently lift/lower/carry/push/pull 1 to 55 pounds, occasionally lift/lower/carry/push/pull 56 to 100 pounds * Position requires routine pushing, pulling, grasping and manual dexterity in the use of hands, arms and shoulders * Able to work in tight spaces * Frequent travel to customer sites (daily) and occasional use of power tools Who We Are: It's our Mission to Drive Dentistry Forward Benco Dental, the largest privately owned, full-service dental distributor in the United States, has remained in the family since 1930-a family that now includes our more than 40,000 customers and over 1,500 associates in the 48 contiguous states. We provide more supply and equipment options than any other full-service distributor, an offering enhanced by a comprehensive suite of services, including office design, equipment repair, practice coaching, financing and project management, wealth management and dental-specific technology solutions. These services are supported by over 400 professionally trained sales representatives and 300 factory-trained service technicians who begin every task by asking "What does the customer want?" If you enjoy working for a progressive company, who is committed to diversity in our workforce, who values all customers and associates, who also provides the opportunity for growth and development- we encourage you to learn more about our Benco family. We are looking for driven professionals who want to play a key role in our future success, while making a positive impact within our industry. Thank you for your interest in Benco Dental. We look forward to hearing from you! We're proud to be an equal opportunity and affirmative action employer. At Benco Dental we celebrate our associates' differences to foster a culture of diversity and inclusion every day. Click here to learn more about how we promote Equal Opportunity and Diversity and Inclusion at Benco. *This position is a field-based / territory-based / virtually- based / remote-based position that does not require consistently reporting to a physical Benco location.

Job DescriptionDuties and Responsibilities This position supports USSOCOM programs including the Satellite Deployable Node (SDN) Family of Systems (FoS) and Naval Expeditionary Combat Command (NECC) Expeditionary Deployable Node (EDN). Supported components include U.S. Army Special Operations Command, Naval Special Warfare Command, Air Force Special Operations Command, Marine Corps Forces Special Operations Command, Joint Special Operations Command, and other Joint Warfighting Commands. The candidate will provide tactical Satellite Communications (SATCOM) support services to Naval Information Warfare Center (NIWC) Atlantic, ensuring mission-critical support for the Special Operations Communications Systems (SOCS) Integrated Product Team (IPT). This role supports Deployable Tactical SATCOM Systems and C5ISR Systems (Command, Control, Communications, Computers, Combat Systems, Intelligence, Surveillance, and Reconnaissance) for USSOCOM and other Expeditionary Warfighting Commands. The Candidate Will: • Perform SOCS Managed Tactical Deployable Communications FoS support inside and outside of the Contiguous United States (CONUS and OCONUS) as embedded support., • Have notable experience performing one or a combination of the following duties:, • Design, develop, and construct major units, devices, or equipment., • Conduct tests or experiments; analyze results; redesign or modify equipment to improve performance; and report results., • From general guidelines and specifications (e.g., size or weight requirements), develop designs for equipment without critical performance requirements that are difficult to satisfy, such as:, • Engine parts, • Research instruments, • Special-purpose circuitry, • Analyze technical data to determine applicability to design problems., • Select from several possible design layouts; calculate design data; and prepare:, • Layouts, • Detailed specifications, • Parts lists, • Estimates, • Procedures, • Check and analyze drawings or equipment to determine adequacy of design., • Plan or assist in planning tests to evaluate equipment performance., • Determine test requirements, equipment modifications, and test procedures., • Conduct tests using all types of instruments., • Analyze and evaluate test results and prepare reports on findings and recommendations., • Be capable of performing non-routine and complex assignments involving responsibility for:, • Planning and conducting a complete project of relatively limited scope or a portion of a larger and more diverse project., • Selecting and adapting plans, techniques, designs, or layouts., • Contacting personnel in related activities to resolve problems and coordinate work., • Reviewing, analyzing, and integrating the technical work of others., • May train and assist lower-level technicians., • Associate’s degree in engineering technology, math, or science; OR, • Formal electronics training from:, • Technical School, • Class A or B military school in electronics or communications, • Four-year electronics apprentice program, • Six (6) years with degree/formal training OR ten (10) years with HS/GED of practical experience to include:, • Design, development, and construction of major units, devices, or equipment, • Conducting tests or experiments; analyzing results; redesigning or modifying equipment to improve performance, • Developing designs from general guidelines and specifications, • Preparing layouts, detailed specifications, parts lists, estimates, and procedures, • Planning and conducting tests to evaluate equipment performance, • Performing non-routine and complex assignments involving responsibility for planning and conducting projects Benefits Full-time employees are eligible for the following benefits enrollment from their date of hire: • Health Insurance - Centurum provides insurance for employee and dependent in a comprehensive package. Coverage for vision care is included. This option is available on a cost-sharing basis., • Dental Insurance - Available in conjunction with Health Insurance for an additional cost. Provides oral maintenance care for employee and dependent., • Basic Life Insurance - Company provided benefit for all full-time employees., • Supplemental Life Insurance - Optional life insurance coverage to employees at group rates., • Dependant Life Insurance - Optional coverage for dependents at a group rate., • Long Term Disability Insurance - Optional coverage available to employees at group rates., • Vacation and Sick Leave - Leave accrual is determined by length of service., • Holidays - The company observes ten paid holidays each year. Powered by JazzHR ddk6sxGp6W

Job Description Field Sales Specialist – Connector Industry Position Summary The Field Sales Specialist is responsible for driving revenue growth by promoting and selling electronic connector and interconnect solutions to OEMs, integrators, awwwnd distribution partners within an assigned territory. The role combines technical application support with strategic account development to identify new opportunities in markets such as industrial automation, robotics, transportation, energy, and electronics manufacturing. Key Responsibilities Sales & Business Development • Identify, develop, and close new business opportunities for connector and interconnect solutions., • Manage and grow relationships with OEMs, contract manufacturers, and system integrators., • Achieve or exceed territory sales targets and growth objectives., • Develop account strategies to penetrate key applications such as automation, robotics, sensors, servo motors, and industrial networking., • Provide technical guidance on connector selection including D-Sub, M8, M12, circular, hybrid, power, and high-speed data I/O connectors., • Work closely with engineering teams to recommend appropriate interconnect solutions based on electrical, mechanical, and environmental requirements., • Support design-in opportunities during early product development stages., • Manage relationships with authorized distributors and channel partners., • Train distributor sales teams on connector product lines and applications., • Coordinate demand creation activities and joint sales calls., • Track competitive products and pricing within the interconnect market., • Identify emerging applications such as:, • Industrial automation, • Robotics, • Autonomous systems, • Data centers, • EV and transportation, • Ensure high levels of customer satisfaction through responsive technical and commercial support., • Coordinate internally with engineering, operations, and customer service to resolve issues., • Support quotations, pricing negotiations, and contract discussions. Qualifications Experience • 3–7+ years of experience in technical sales within the connector, cable assembly, or electronic components industry., • Experience selling through distribution and direct OEM accounts. Familiarity with: • Circular connectors (M8, M12, M23), • D-Sub connectors and Hoods, • Industrial Ethernet connectivity, • High-speed data connectors, • Power connectors, • Cable assemblies, • Environmental ratings (IP67, IP68), • EMI/EMC considerations Key Skills • Strong consultative sales and solution selling skills, • Ability to translate technical requirements into product solutions, • Territory planning and pipeline management, • Excellent presentation and negotiation abilities, • CRM proficiency Performance Metrics • Revenue growth within assigned territory, • Number of design-in wins and new accounts, • Distributor sales growth, • Pipeline value and forecast accuracy, • Customer satisfaction and retention Typical Customers • OEM machine builders, • Robotics manufacturers, • Industrial automation companies, • Sensor and actuator manufacturers, • Transportation and aerospace companies, • Electronics manufacturing services (EMS) #LI_EF1

Job Description Security Clearance • Active Top Secret DoD clearance preferred, U.S. Citizenship required. Work Arrangement Onsite with occasional travel. Job Overview Sr. Aeromechanical Engineers work to solve the nation's hardest problems through rapidly deployed technology solutions. Are you an aerospace or mechanical engineer stuck in a narrow job? Do you want to rapidly build autonomous systems aligned with your hobbies and interests? This job is a lead aeromechanical engineer that takes napkin sketches of airplanes and robots to final production. We work with small teams to move fast and make fielded systems. Here you will lead a small agile team to make these systems a reality from napkin sketch to 1.0 prototype. Essential Functions • Senior role within the engineering team that helps lead in the design and development of UAS products and subsystems., • Opportunity to build and tests prototype systems to validate designs, • Have decision-making abilities for design challenges and coordination with multidisciplinary engineering groups, • Performance of all vehicle designs from initial concept to complete production-ready design, • Conduct presentations (Formal and Informal) on designs., • Uses scientific and engineering principles to assess deficiencies in any given design and the impact of potential changes, • Makes complex decisions to meet stated and derived requirements, • Complete assigned tasks within the project schedule and budget, • Provide guidance and mentorship to others in both their discipline and company values, • Conduct FEA and CFD simulation analysis on aircraft and powerplants Design airframes and other aeromechanical parts, • Act as an interface to customers as ideas are communicated, • Travel as required Standard Essential Functions Regular and reliable attendance on a full-time basis [or in accordance with posted schedule]. Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices. Embodies AEVEX's cultural values and aligns daily actions with department goals and company culture. Qualifications and Competencies • Demonstrated competence in Mechanical Engineering processes and design/analysis tools, solving Mechanics & Kinematics problems, solving Thermodynamics problems, • Experienced in successfully designing mil-y electronics products, • Demonstrated understanding of metallic, plastic, and composite material properties, • Demonstrated ability to solve basic structural dynamics problems, • Proficiency in SolidWorks, Excel, Word, and PowerPoint is required, • Demonstrated understanding of industry design and documentation standards (GD&T, ASME, Change Control, etc.), • Experienced with designing: machined parts, composite parts, injection molded parts, sheet metal parts, wire assemblies, and mechanical assemblies for low, medium, and high-volume manufacturing processes, • Experienced with: mechanical, lab, field, flight, and environmental testing, • Demonstrated understanding of engineering configuration management processes, • Demonstrated ability to work with high-level program requirements, organize, schedule, and delegate tasks to an engineering team, • Demonstrated leadership experience, • Periods of development may require long irregular hours around deadlines, weekends, and some holidays and in-field test environments Education / Certifications • Bachelor's Degree in Mechanical or Aerospace Engineering Experience • Minimum of 8+ years of experience in a progressive technical capacity within an engineering organization Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: Frequently required to sit, and to reach to use computers and other office equipment About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits for qualified employees. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Job Description Fire Alarm Technician Fire Alarm Technician - $20-$30/hr - DOE We are currently hiring Fire Alarm Technicians with 3+ years of experience performing fire alarm installations in a commercial setting. Candidates are encouraged to apply ASAP as we have an immediate need in the Tampa area. Please apply today by calling/texting Maxwell Coletta at 813-321-0072 or emailing your resume to or apply directly to this posting by clicking “Apply” below. Fire Alarm Technician Job: · Installation, service, troubleshooting and programming numerous Fire Alarm Systems including: Silent Knight, Simplex, Notifier, EST, Fire Lite, etc. · Installing various fire alarm devices including pull stations, horns, strobes, sirens, smore detectors, heat detectors, panels, glass breaks, etc. · Working in teams or independently to complete commercial installation and service projects Qualifications: · Recent experience installing/servicing Fire Alarm systems in a commercial construction environment · Your own basic hand tools · Fire Alarm service or programming experience is a plus · Strong background in electronics Compensation: · Competitive starting pay $20 -$30/hr or depending on experience · Get paid weekly! · Option to enroll in Medical, Dental, Vision, and contribute to 401K · Referral Bonuses of up to $250 for referrals that result in a placement – simply click “REFER” below to share with a friend! Company DescriptionOutsource is the Nation's leading provider of low voltage, electrical, and plumbing talent. We work EXCLUSIVELY in electrical, plumbing, and low-voltage, and have been placing candidates of all levels with the right companies since 1998 so we know a thing or two about making a good match. Outsource is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, gender, sexual orientation, gender identity or expression, religion, national origin, marital status, age, disability, veteran status, genetic information, or any other protected status.Outsource is the Nation's leading provider of low voltage, electrical, and plumbing talent. We work EXCLUSIVELY in electrical, plumbing, and low-voltage, and have been placing candidates of all levels with the right companies since 1998 so we know a thing or two about making a good match. \r\n\r\nOutsource is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, gender, sexual orientation, gender identity or expression, religion, national origin, marital status, age, disability, veteran status, genetic information, or any other protected status.

Job Description • Please note that this is for an upcoming position. We are, however, accepting applications for this anticipated need. If you are interested in joining The Building People, we encourage you to APPLY TODAY! The Building People, LLC, has a position open for a full-time Senior Building Controls Technician to provide services related to the expansion, upgrade or replacement of building automation hardware and software for smart building infrastructure. The position will work independently to meet project requirements with limited supervision. The programmer will be responsible for programming, configuring, and testing of Direct Digital Control (DDC) building automation and control systems. Responsibilities/Duties • Design and engineer control system hardware and software programming based on project plans, specifications, and other contract documents, • Ability to program projects with various levels of complexity, • Capable of performing network troubleshooting, database troubleshooting and repair programming, • Collaborates with the engineering team on the system configuration, network and software requirements, graphics, programming, and sequences of operations, • Develop and configure the sequence of operations, programming, graphics, database, network, and integrations into third party systems, • Maintains accurate and thorough project documentation and redlines, • Provides owner training as required by the project, • Executes system commissioning and functional testing, • Assist in installation of control hardware, • Startup and commission new hardware installations, • Provide project management assistance on projects as required, interfacing directly to customers, • Supervise sub-contractors and suppliers as needed Required Skills * Excellent verbal and written communication skills * Proficient in Microsoft Office Suite or related software * Programming skills * Strong analytical skills * Strong interactive and communication skills * Strong troubleshooting skills * Experience with electronics and basic electrical circuits * Thorough understanding of and ability to use appropriate tools * Excellent customer service and ability to work well with others * Knowledge of DDC Control Theory and Applications as related to HVAC equipment * Strong knowledge of common DDC communications protocols such as but not limited to BACnet, LON, Modbus, etc. Required Experience/Education * At least 3 years of experience with programming, startup and commissioning of control systems * Niagara N4 certification * Experience with multiple manufacturers of controls a plus * Technical knowledge with installation of controls equipment and ancillary devices Physical Requirements * Physically able to climb overhead or crawl under spaces to complete jobs. * Must be willing to work at heights. * Must be able to lift up to 35 pounds at times.

Job DescriptionDescription: Smiths Interconnect, Inc. is a leading provider of technically differentiated electronic components, subsystems, microwave and radio frequency products that ensure high speed, secure connectivity of critical applications in the defense, aerospace, communications and industrial markets. Our microwave technology is used in radar, communication and surveillance systems that are mission-critical and operate in extreme environments in aerospace and defense. Our microwave components and connectors ensure optimal performance, durability and safety of space satellites. Our semi-conductor test products are used to test highly sophisticated semi-conductors and electronic circuits in communication systems, gaming products and computing devices. Our in-flight antenna systems provide passengers with internet connectivity gate-to-gate on planes around the world. Our connector and cable solutions ensure reliability of critical medical equipment, and safe operation of trains and transport systems. Our products and services are often critical to our customers’ operations, while our proprietary technology and high service levels help create competitive advantage. As such, we welcome colleagues with a curious mind, who are happy with responsibility, and enjoy a challenge. Smiths Interconnect, Inc. is currently seeking new talent for a PCB Designer position. This position will primarily work with Designers, Manufacturing Engineers, Electrical Engineers, and Mechanical Engineers to create printed circuit board (PCB) layouts along with PCB fabrication and assembly documentation. We are looking for the right individual who thrives in creating, enjoys problem-solving, and pays attention to detail, while operating in a rewarding, friendly, forward-thinking environment. Your previous education or experience must demonstrate your desire to create and problem solve whether this was in high school, trade school, college, university, industry, or the military. We will provide training that will build on your core aptitudes and problem-solving capabilities. We are looking for a team player who is friendly, energetic, cognitive, and eager to learn. U.S. Citizenship Required. U.S. Citizenship is required to obtain government security clearance. Key traits for this position should include: • Sound reasoning and strong problem-solving abilities, • Understanding basic electrical theory and material properties (Examples include conductivity, impedance, inductance, PCB materials/finishes, etc.), • Attention to detail which is crucial in this role, • Being a fast learner, flexible, and adaptable, • Having great personal and communication skills for internal and external interactions, • The ability to speak and write clearly when describing technical issues, • Use Schematic creation and PCB layout design software (DxDesigner, PADS), • Create PCB drawings and Gerber files for PCB fabrication (PADS, AutoCAD), • Use and modify CAD models and drawings (PADS, AutoCAD), • Create and check component footprints according to IPC and company standards, • Interface with other Engineers about component footprints and circuit layouts, • The design and layout of printed circuit boards for Radio Frequency (RF), mixed signal, and hi-speed circuits based on industry and company standards and procedures, • Generation, modification and release of accurately detailed documents, drawings, 3D models and files for schematics, PCB fabrication, bill of materials, and assembly drawings using CAD tools along with Product Lifecycle Management (PLM) systems, • Support Engineers during prototyping, design verification, and updates to designs, • Collaboration with Electrical, Mechanical, and Manufacturing Engineers, and Designers, • Support of technical proposal generation, peer/customer design reviews, and supplier enquiries, • Other duties as requiredRequirements: Experience: • Must have creative & problem-solving skills demonstrated through projects, experience, or training., • Shall have a minimum of 2 years of experience with PCB design, CAD, electronics assembly or test, or applicable experience in military or aerospace industry. Security: U.S. Citizenship Required. U.S. Citizenship is required to obtain government security clearance.

Job Description Cognitive is an IT and software engineering services company dedicated to elevating the quality, speed and delivery of today’s US government healthcare programs. With a wealth of clinical expertise and hands-on experience, our team understands the significant challenges our government clients—and their customers—face every day. This real-world experience equips us to develop IT solutions that seamlessly connect all facets of healthcare delivery. At Cognitive, we’re guiding government agencies to the forefront of technology innovation in healthcare delivery. Position Overview: The DevOps Manager position is part of the Cognitive professional services team supporting the DoD Defense Health Agency TRICARE Fifth Generation Contract (“T-5”) supporting TriWest Healthcare Alliance. The primary role will be to support the development, deployment, and integration of complex software systems to the Microsoft Azure Government Computing Cloud. Key Responsibilities Include: • Manage a high-performing team of DevOps Engineers with a focus on hands-on technical guidance. Cultivate a culture of innovation, collaboration, and continuous improvement within the technical domain., • Leads coaching and enablement of teams on DevOps practices. Train and support developers from source control, through build automation, merge resolution, CI, test automation, deployment based on tools usage and policies, • Act as a DevOps subject matter expert (SME) across all pods, driving standardization and best practices across the program, • Setup, manage, and maintain the continuous build/continuous integration infrastructure used by the application, ensuring conformance to all applicable security standards, • Partner with engineering and product managers to ensure business and security requirements are supported by corresponding technical requirements and infrastructure, • Aid in deployments, operations, monitoring, and continued availability of the production software and infrastructure, • Support an Agile, Lean, SAFe-based environment utilizing DevSecOps, CI/CD, and related processes, methodologies, and concepts., • Ensure optimal use of Source Control Management tools in Azure DevOps environment (Git), • Create, maintain, and manage fully automated CI/CD processes for multiple environments using Azure DevOps, • Collaborate on policies, standards, guidelines, governance and related guidance for CI/CD, software development, and deployment., • Enable successful release management by moving code from Development and Testing environments to Staging and Production, • Manage and maintain the security infrastructure required for deploying secure, scalable and reliable applications, while routinely conducting preventative and adaptive maintenance to increase security, performance, and reliability, • Partner with QA, Security, and Product teams for end-to-end delivery quality, • Bachelor’s degree in computer science, electronics engineering, or other engineering or technical discipline (8 years of additional relevant experience may be substituted for education), • 8 years minimum experience in a similar role/capacity, • Proven experience in hands-on technical leadership roles, • Microsoft Azure Certifications like DevOps Engineer is a plus, • Experience with cloud deployments and cluster resource management with Azure GovCloud including monitoring systems, logging, and security implementation, • Background in deployment and configuration of Azure Infrastructure such as API Management, Azure Function Apps, KeyVault, Entra, Power Platform, • Experience with Azure DevOps and Pipelines, Azure DevOps Git Repository Management, • .NET C# applications and Web Server Software, Visual Studio, Windows Server Operating System, • Experience supporting DoD/Federal environments, including PRISMA and STIG compliance, • Hands-on experience in Azure Government Cloud (IL2/IL4/), • Experience of software development processes and code management tools and processes, • Knowledge of DevOps Engineering Processes and Operations & Management (O&M), • Ability to conduct in-depth triage, troubleshooting, and forensics across all facets of the cloud stack while executing process corrective action and continual service improvement, • US Citizenship required, • Be part of a mission-driven organization making a difference in healthcare IT., • Collaborate with innovative and passionate professionals that are there to support you at every turn., • Enjoy a supportive work/life balance with the flexibility of a 100% remote company., • Benefit from opportunities for growth and development in a dynamic environment.

Job Description About Microchip USA Microchip USA is an independent technology distributor headquartered in Tampa, Florida, with additional offices in Houston, Hong Kong, and Shenzhen, China, and a prior presence in Europe. We specialize in sourcing hard-to-find, end-of-life, and excess electronic components, supporting some of the world’s leading manufacturers when traditional supply chains fall short. In a market where availability, speed, and trust matter, we help our clients solve complex supply chain challenges, often when others cannot. The Opportunity We are seeking a skilled Junior Sourcing Specialist. The job is a critical role for our team; you will streamline efficiency and improve overall processes around sourcing electronic components. You will locate, evaluate, and develop vendors outside of our approved vendor list (AVL). Utilizing Microchip USA’s core values of Efficiency, Dedication, and Excellence, you will be set up for success. Responsibilities: * Conduct market research to ensure the company acquires the best quality electronic parts * Assess the quality, reliability, and production capacity of potential suppliers based on factors like quality certifications, delivery times, and cost structure * Negotiate contracts with suppliers to secure the best price, payment terms, and delivery schedules with a win-win mindset * Undertake contract management regarding complex procurement * Understand the supplier and internal politics to successfully influence the decision makers and achieve Microchip USA’s and our client’s needs Qualifications: * A Bachelor's degree in a related field or equivalent experience * An understanding of Electronic Component sourcing * Experience in Supplier Management * An overall understanding of the Electronics Market and component types * Team player who thrives in collaborative environments and revels in team success * Strong communication and written skills * Integrity and discretion when handling internal/external company information * Strong influence management skills * Advanced leadership, delegation, team building, and mentoring skills Work Environment * Full-time, in-office role based in Tampa, Florida * Monday–Thursday: 9:00 AM – 5:00 PM EST (includes a paid lunch break and afternoon break) * Fridays: performance-based early release * We believe in working hard, winning together, and creating an environment where performance is recognized and rewarded Why Microchip USA * Strong leadership, a growing business, and a fun, energized culture * Real earning potential tied directly to performance (sales executive positions only) * Opportunity to help build something meaningful and scalable * A team environment where people genuinely care for and support each other

Job Description About Manada Manada Technologies is a leader in white-labeled national services, specializing in installation, logistics, and integration. We deliver scalable, turnkey solutions to include telecommunications, consumer electronics, smart home, security, and retail industries. We are seeking a driven, execution-focused Regional Operations Specialist to lead operational performance. Position Summary As a Regional Operations Specialist, you will supervise and manage field installations, ensuring orders/projects are executed safely, efficiently, and to the highest quality standards. You will serve as the primary point of contact for clients, managing expectations and delivering exceptional service. With new opportunities, you will be an essential part of establishing quality installation standards, coordinating and training partner installation teams, and ensuring client satisfaction. In addition, you will provide hands-on leadership and coaching to field installation partners, set standards, monitor performance, and drive operational excellence across your assigned market through management activities, while also actively participating in field installations as needed. Key Responsibilities Client Relationship Management • Serve as the point of contact for assigned clients within the market., • Build and maintain strong, professional relationships to ensure client satisfaction and retention., • Proactively manage and address concerns, escalations, and service gaps with urgency and professionalism., • Conduct regular business reviews with clients to assess performance, expectations, and opportunities for improvement., • Ensure alignment between company standards and client expectations., • [additional description] Prepare reports and present project and client performance to executive leadership with analysis and recommendations. Operational & Quality Oversight • Active involvement in field operations to ensure service delivery meets company and client quality standards., • Implement and enforce quality control processes, audits, and corrective action plans., • Monitor performance metrics, identify trends, and create and execute improvement strategies., • Ensure compliance with safety policies, operational procedures, and company guidelines., • Drive continuous improvement initiatives within the market. Field Leadership & Team Development • Provide direct leadership, coaching, and accountability to field team members., • Conduct ride-alongs, performance reviews, and in-field observations to reinforce standards., • Support hiring, onboarding, training, and ongoing development of field staff., • Foster a culture of professionalism, ownership, and operational excellence., • Address performance concerns promptly, document appropriately, and develop action plans and procedures to improve performance locally and nationwide. Field Installation Leadership & Execution • Lead and actively participate in field installations, demonstrating proper techniques and best practices., • Provide hands-on installation support during peak demand, new client launches, complex projects, and other evolving business needs., • Troubleshoot on-site issues, implement solutions quickly, and ensure operational continuity., • Set the example for field teams in professionalism, ownership, and technical execution. Requirements Qualifications • 3–5+ years of leadership experience in installation operations, service, logistics, or related industry., • 3-5+ years’ experience in one of the below industries:, • Electrical Contracting (Low Voltage Division), • Telecommunications Infrastructure, • Structured Cabling & Network Infrastructure, • Security & Life Safety Systems, • Audio-Visual (AV) Integration, • Technology Installation Services, • Building Systems Integration, • Ability to balance strategic leadership with hands-on field support., • Strong client-facing experience with proven relationship management skills., • Demonstrated ability to manage teams, drive performance, and enforce accountability., • Experience analyzing operational metrics and implementing performance improvements., • Excellent communication, organizational, and problem-solving skills., • Valid driver’s license and ability to travel within assigned market. Work Environment • Warehouse, retail, and in-home service environments., • Travel extensively within the assigned region to lead installations, provide hands-on field support, and ensure every project meets quality and client standards., • Willingness to travel up to 75%, including assignments outside the designated region based on operational demands. Benefits Benefits • 401k, • Paid time off, • Medical benefits, • Health, • Dental, • Vision, • Company vehicle & gas card The salary range for this position is $60,000–$90,000. We are seeking motivated individuals who are eager for growth and professional development.

Job Description Job description: Position: Director of Business Development - RF/Microwave Simulation Models Location: Onsite - Tampa Bay, FL Schedule: M - F Business Hours Pay: $125,000 - $175,000 Who We Need A technically-savvy, high-energy sales and business development leader who can step in as the #1 growth driver for a profitable, niche-market leader in RF/microwave device modeling. This is an executive role reporting to the President/CEO and carrying full P&L responsibility for revenue growth. You'll Own or Assist with • Full-cycle revenue growth: strategy execution results, • Helping to Build and lead the sales + marketing team (inside staff + global reps), • Developing new large account potential customer relationships (OEMs, foundries, defense primes)., • Expanding market share in RF/microwave, 5G/6G, defense/aerospace, semiconductor, and test & measurement segments, • Performing market assessment research to assist executive management on strategic planning and R&D investment directions., • Increasing the pipeline: lead generation, CRM discipline, forecasting, and closing, • Growing Strategic partnerships (Component manufacturers, foundries, EDA vendors), • Participating in marketing and marcom (trade shows, digital, PR, web, campaigns), • 8+ years in technology and 4+ years in the RF/microwave or high-frequency electronics industry, • Proven track record of growing revenue in a technical B2B environment (ideally $2M–$20M range), • Hands-on success building and leading small, high-performance sales/marketing teams, • General familiarity with electronic design automation (EDA) software, from companies such as Keysight Technologies, Cadence and Ansys, as used for RF/Microwave circuit design and electromagnetic simulations., • Deep understanding of RF engineers' and designers' workflow and pain points, • Comfortable selling both direct and through manufacturers' reps and distributors, • Sales channel management experience, • Bachelor's degree in Engineering, EE preferred (or Business with strong technical, preferably RF/Microwave, industry experience); MBA, or MSEE a plus, • Excellent communicator – can talk fluently with design engineers one minute and C-level execs the next, • Proficient with CRM systems and Microsoft Office, • U.S. citizen or permanent resident (ITAR), • Strategic yet hands-on – happy to roll up sleeves and close deals yourself, • Data-driven and metrics-oriented, • Capable of becoming passionate about how we enable simulation-based design success and turn that passion into customer and partner enthusiasts., • Positive, high-integrity, customer-obsessed

Job DescriptionDescription: Spartronics- Director, Global Business Development – (EMS) Vietnam Manufacturing Drive Global Growth for High-Reliability Electronics Manufacturing Must reside in the United States. Spartronics is seeking a seasoned EMS business development leader to drive new international manufacturing programs for our Vietnam operations. This role is designed for a true hunter — someone who understands the value of low-cost country manufacturing and has the relationships, credibility, and technical knowledge to win complex programs from leading OEMs. You will focus on winning new business and expanding Spartronics’ Vietnam manufacturing footprint, helping OEM customers transition or launch products in a world-class, cost-competitive environment. If you have successfully secured large EMS programs and helped OEMs navigate global manufacturing strategies, this is an opportunity to leverage Spartronics’ capabilities to land major programs and build long-term partnerships. About Spartronics At Spartronics, we don’t just manufacture electronics — we help bring innovation to life. We are a global electronics manufacturing services (EMS) provider partnering with leading OEMs across aerospace, defense, medical devices, life sciences, and industrial technology. Our teams support customers through the entire product lifecycle — from design and engineering through production and supply chain management. Our Vietnam manufacturing facility represents a major competitive advantage for customers seeking high-quality, cost-optimized production. With more than 270,000 square feet of advanced manufacturing space and over 20 years of operational experience, the site specializes in complex, high-reliability products requiring precision, quality, and regulatory compliance. Why This Role Matters As Director of International Business Development, you will play a key role in expanding Spartronics’ global manufacturing footprint by securing new OEM customers and placing high-value programs into our Vietnam facility. This position is focused entirely on new customer acquisition and strategic program wins. You will leverage your network, market knowledge, and EMS expertise to help OEMs evaluate and adopt low-cost country manufacturing strategies while positioning Spartronics as their trusted long-term partner. What You’ll Do • Develop and execute a go-to-market strategy to identify and win new OEM customers seeking global EMS manufacturing solutions, • Drive new business growth for Spartronics’ Vietnam manufacturing operations., • Identify, qualify, and close complex EMS opportunities across medical devices, aerospace, defense, life sciences, and industrial markets., • Generate and manage $10M+ program opportunities with significant lifetime revenue potential., • Guide OEM customers through the low-cost country qualification and transition process., • Build executive-level relationships with engineering, supply chain, and procurement leaders., • Represent Spartronics at industry events, trade shows, and executive meetings., • 10–15+ years of EMS business development or strategic sales experience, • Proven track record of winning new OEM accounts and landing large manufacturing programs, • Experience closing $10M+ deals or major program awards, • Demonstrated success placing products into low-cost country manufacturing environments, • Strong understanding of PCBA, electromechanical assembly, and full system integration, • Deep knowledge of the EMS industry and OEM procurement processes, • Experience selling into medical device, aerospace, life sciences, or industrial OEMs, • Ability to navigate complex technical and commercial discussions with executive stakeholders, • Strong pipeline development, opportunity qualification, and deal-closing discipline, • CRM proficiency (Salesforce preferred), • 20+ years of manufacturing experience in Vietnam, • 270,000-square-foot advanced manufacturing facility, • Expertise in high-reliability electronics manufacturing, • Certifications supporting regulated industries including ISO 9001, AS9100, and ISO 13485, • Full lifecycle support from engineering through production, • Base salary: $150,000 – $165,000 annual salary, • MBO's the 1st year (up to $10,000 quarterly) Travel- Regular travel for customer meetings, industry events, and facility visits. Estimated 30–40% travel. Must reside near a major airport and have a valid US Passport. Ready to Expand the Future of Global Manufacturing? If you are an experienced EMS sales professional who thrives on winning new business and helping OEMs scale globally, we want to talk with you. Join Spartronics and help bring the next generation of aerospace, medical, and industrial technology to life through world-class manufacturing in Vietnam.

Job Description Position Summary Description Responsible for the modeling of Seminole and the Member’s transmission system, including model maintenance, interpreting equipment specifications and test sheets into usable model information, and verifications. Conducts annual/periodic, and strategic transmission studies to ensure system reliability and supports the expansion of the transmission system, collaborating with the Seminole Members and diverse stakeholders that include Florida Reliability Coordinating Council, internal departments, and industry participants. The work includes, but not limited to, power flow analysis, voltage studies, short circuit analysis, stability/transient analysis, and implementation of regulatory reliability standards. Performs studies and analyses that reflect current and future transmission system configurations and recommends upgrades, system modifications and/or expansion to transmission system facilities based on load growth, generation interconnection, and identified reliability needs. The position analyzes data, reports and provides recommendations. Ability to lead initiatives and work with less supervision. Qualifications and Education Requirements Bachelor of Science Degree in Electrical Engineering from an ABET-accredited institution is required with a minimum of one and a half (1.5) years of planning/engineering experience in the electric utility industry or related practice. Proficiency in applying higher-level engineering concepts. Strong analytical skills and proficiency in power system simulation and technical documentation. Core Competencies: Adaptable, Collaborative, Conscientious, Critical-Thinking, Outcome-Driven and Professional Technical Competencies/Skills: • Strong foundation of electrical engineering principles, • Adept at navigating technical documents (drawings, manuals, etc.), • Computational problem-solving expertise to engineering problems, • Programming proficiency, • Effective verbal/nonverbal, listening, and written communications, • Demonstrated ability to establish and adjust priorities as necessary to work with stakeholders in resolving problems, • Critical thinking, • Planning and organization, • Proactive initiative and attention to detail, • Self-starter and eager to learn with a growth mindset to address opportunities in knowledge and skills, • Ability to work effectively as part of a team, • Has an established a network of relationships with multiple stakeholders Essential Functions • Coordinates the development and review of electrical computer simulations models of transmission lines and substations for transmission planning databases, • Supports the analysis of and development and review of innovative transmission plans to ensure safe, reliable, effective, and efficient operations of the electric transmission system, • Coordinates with internal stakeholders on transmission interconnection studies and affected system studies for new generation that address system impacts, economics, and project execution scheduling, • Provides input and support to other internal departments on transmission matters such as substation capacity increases, transformer upgrades and/or replacements, line conductor replacements, operations support, and reliability upgrades, • Provides technical direction to other non-engineer technical professionals (e.g., designers, technicians, coops, etc.,), • Develops Python scripts enabled programs for computer simulation tools, • Participates in initiatives, work groups and/or industry forums that supports the inclusion of Seminole’s interests, • Participates in the power system steady-state contingency analysis, short circuit analysis, dynamic stability analysis and single point of failure analysis of the interconnected transmission system, • Executes departmental, enterprise level, and industry required processes and procedures, including those required to demonstrate compliance with the NERC Reliability Standards and FRCC modeling requirements, • Recommends changes in procedures, design or equipment to improve performance or efficiency, • Participates in detailed technical analysis for the development of long-term transmission system expansion plans, • Analyzes data, reports, and collaborates with colleagues on assigned tasks, • Develops and delivers formal oral and written presentations which inform and persuade, • Effectively communicates progress of projects to team per the RACI responsibilities methodology and delivers thoughtful feedback to others Internal/External Stakeholders and Industry Groups • Florida Reliability Coordinating Council (FRCC), • Federal Energy Regulatory Commission (FERC), • North American Regulatory Corporation (NERC), • Institute of Electrical and Electronics Engineers (IEEE), • Neighboring Utilities, • Seminole’s Engineering and Maintenance, Operations Planning, Transmission Services, Load Forecasting, Finance, Planning & Analysis, Legal, and Environmental Physical Requirements Must be able to wear personal protective equipment (PPE), and respiratory equipment may be required. Must possess a valid Florida driver’s license with an acceptable motor vehicle report. Working Conditions Normal office conditions. Some travel and work outside of normal business hours to technical seminars, conferences, professional meetings, and meetings with Member cooperative headquarters may be required. While working in certain areas of the plant, there may be extreme temperatures and conditions. “Disclaimer - Management may modify this job description at any time and may require the performance of additional duties, or modification of physical requirements, with or without advance notice.”

Job Description Security Clearance • Active Top Secret DoD clearance preferred, U.S. Citizenship required. Work Arrangement Onsite with occasional travel. Job Overview Sr. Aeromechanical Engineers work to solve the nation's hardest problems through rapidly deployed technology solutions. Are you an aerospace or mechanical engineer stuck in a narrow job? Do you want to rapidly build autonomous systems aligned with your hobbies and interests? This job is a lead aeromechanical engineer that takes napkin sketches of airplanes and robots to final production. We work with small teams to move fast and make fielded systems. Here you will lead a small agile team to make these systems a reality from napkin sketch to 1.0 prototype. Essential Functions • Senior role within the engineering team that helps lead in the design and development of UAS products and subsystems., • Opportunity to build and tests prototype systems to validate designs, • Have decision-making abilities for design challenges and coordination with multidisciplinary engineering groups, • Performance of all vehicle designs from initial concept to complete production-ready design, • Conduct presentations (Formal and Informal) on designs., • Uses scientific and engineering principles to assess deficiencies in any given design and the impact of potential changes, • Makes complex decisions to meet stated and derived requirements, • Complete assigned tasks within the project schedule and budget, • Provide guidance and mentorship to others in both their discipline and company values, • Conduct FEA and CFD simulation analysis on aircraft and powerplants Design airframes and other aeromechanical parts, • Act as an interface to customers as ideas are communicated, • Travel as required Standard Essential Functions Regular and reliable attendance on a full-time basis [or in accordance with posted schedule]. Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices. Embodies AEVEX's cultural values and aligns daily actions with department goals and company culture. Qualifications and Competencies • Demonstrated competence in Mechanical Engineering processes and design/analysis tools, solving Mechanics & Kinematics problems, solving Thermodynamics problems, • Experienced in successfully designing mil-y electronics products, • Demonstrated understanding of metallic, plastic, and composite material properties, • Demonstrated ability to solve basic structural dynamics problems, • Proficiency in SolidWorks, Excel, Word, and PowerPoint is required, • Demonstrated understanding of industry design and documentation standards (GD&T, ASME, Change Control, etc.), • Experienced with designing: machined parts, composite parts, injection molded parts, sheet metal parts, wire assemblies, and mechanical assemblies for low, medium, and high-volume manufacturing processes, • Experienced with: mechanical, lab, field, flight, and environmental testing, • Demonstrated understanding of engineering configuration management processes, • Demonstrated ability to work with high-level program requirements, organize, schedule, and delegate tasks to an engineering team, • Demonstrated leadership experience, • Periods of development may require long irregular hours around deadlines, weekends, and some holidays and in-field test environments Education / Certifications • Bachelor's Degree in Mechanical or Aerospace Engineering Experience • Minimum of 8+ years of experience in a progressive technical capacity within an engineering organization Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: Frequently required to sit, and to reach to use computers and other office equipment About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits for qualified employees. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Job DescriptionSalary: 28-35 hourly Wiginton Fire Systems is seeking select candidates for Fire Alarm Technicians in its Tampa Office. Position Summary • Program and commission newly installed fire alarm systems., • Layout, assemble, and install low-voltage equipment for fire alarm systems, ensuring work complies with relevant codes and regulations., • Test all features and equipment to ensure optimum functioning., • Perform inspections and diagnose any problems., • Read, understand, and follow product manuals and educate customers on the care and maintenance of systems., • Write and submit customer status and completion reports., • Requires participation in a rotational on-call schedule, including nights and weekends Experience, Education, Skills Required • Oversee and direct helpers and/or installers. Experience, Education, Skills Required, • High School Diploma or equivalent., • Two-year Associate Degree in electrical/electronics or equivalent experience., • Working knowledge of Windows 9X, test equipment, and communication devices., • Possess a valid driver's license and a clean background and driving history., • Candidates must have at least 2 years of experience in servicing and inspecting fire alarm systems and panels., • Own a Piece of the Pie:Become an employee-owner and share in the company's success. This isn't just a job; it's an opportunity to build long-term wealth and directly benefit from your contributions., • Secure Your Future:Plan for a comfortable retirement with our generous 401(k) plan, complete with company matching to help your savings grow faster., • Take Control of Your Healthcare:Manage your healthcare expenses wisely with our flexible spending account, allowing you to use pre-tax dollars for eligible medical costs., • Recharge and Pursue Your Passions:Enjoy generous paid time off to relax, explore your interests, and maintain a healthy work-life balance. We value your time and want you to be your best inside and outside of work., • Get Rewarded for Your Well-being:Prioritize your health and get rewarded for it! Our Wellness Rewards program offers incentives for healthy habits, making it easier and more rewarding to live a healthy lifestyle. Schedule: • Monday to Friday, • On-call duties, • Overtime may be required Wiginton has been a leader in the fire protection industry since 1967, and has offices throughout the Southeast. We are 100% employee owned and offer full benefits, competitive salary, and company vehicles. We promote from within and offer advancement opportunities for those who want to grow with us. Don't just find another job. Start your career today.

Job Description MAC Sales and Leasing is a premier provider of Rent-To-Own (RTO) furniture, appliances, electronics, and computers in the United States. The company is poised for rapid expansion in the coming years, with plans to open new locations nationwide. Come join our growing team! Benefits include: • Salary: $14.00 - $20.00 per hour, • Paid Time Off, • Closed on Sundays*, • Discounts, • Health & Retirement benefits (vary depending on location) Manager in Training / Management Trainee Role Summary: The Manager in Training (MIT) / Management Trainee program is an entry level vital stepping stone within our organization, with most of our store manager and leaders starting as MITs. The MIT role emphasizes the importance of actively performing job duties to become proficient in all aspects of the business (see the Physical Requirements section). Training provided and you will be cross trained in all aspects of store management and operations. • This is an in-person job and only available physically at the specified location., • You must be over the age of 21 to be considered for this position. Principal Responsibilities: • Train to become proficient in all aspects of the business, • Acquire and maintain customers, • Drive store sales, • Manage customer accounts, • Deliver exceptional customer service, • Perform in-home delivery and setup, • Handle inventory management, • Account management and collection, • Retail sales and customer service, • Must be over the age of 21 to drive a vehicle for work (insurance requirement), • This is an in-person job; remote work is not available, • Effective organizational skills, • Strong communication skills, • High School Diploma or GED Physical Requirements: • Routine lifting, loading, and moving of merchandise (50-300 pounds) using a dolly, • Stooping, bending, pulling, reaching, and grabbing, • Ability to traverse multiple flights of stairs while carrying furniture, appliances, and electronics, • Prolonged periods of driving and standing, • Ability to work in various indoor and outdoor climates and weather conditions Additional Information: • Buddy’s Home Furnishings is an Equal Opportunity Employer and a Drug-Free Workplace. Simply submit a ZippyApp application package which may include the Common Employment Application, Resume, and a Cover Letter. In your Cover Letter, please write a short paragraph describing yourself and why you would make a great addition to our team. ZippyApp is the Common Employment Application for online and mobile that allows you to apply for jobs with one click, and is being accepted at a growing number of businesses each day.

Job Description MAC Sales and Leasing is a premier provider of Rent-To-Own (RTO) furniture, appliances, electronics, and computers in the United States. The company is poised for rapid expansion in the coming years, with plans to open new locations nationwide. Come join our growing team! Benefits include: • Salary: $14.00 - $20.00 per hour, • Paid Time Off, • Closed on Sundays*, • Discounts, • Health & Retirement benefits (vary depending on location) Manager in Training / Management Trainee Role Summary: The Manager in Training (MIT) / Management Trainee program is an entry level vital stepping stone within our organization, with most of our store manager and leaders starting as MITs. The MIT role emphasizes the importance of actively performing job duties to become proficient in all aspects of the business (see the Physical Requirements section). Training provided and you will be cross trained in all aspects of store management and operations. • This is an in-person job and only available physically at the specified location., • You must be over the age of 21 to be considered for this position. Principal Responsibilities: • Train to become proficient in all aspects of the business, • Acquire and maintain customers, • Drive store sales, • Manage customer accounts, • Deliver exceptional customer service, • Perform in-home delivery and setup, • Handle inventory management, • Account management and collection, • Retail sales and customer service, • Must be over the age of 21 to drive a vehicle for work (insurance requirement), • This is an in-person job; remote work is not available, • Effective organizational skills, • Strong communication skills, • High School Diploma or GED Physical Requirements: • Routine lifting, loading, and moving of merchandise (50-300 pounds) using a dolly, • Stooping, bending, pulling, reaching, and grabbing, • Ability to traverse multiple flights of stairs while carrying furniture, appliances, and electronics, • Prolonged periods of driving and standing, • Ability to work in various indoor and outdoor climates and weather conditions Additional Information: • Buddy’s Home Furnishings is an Equal Opportunity Employer and a Drug-Free Workplace. Simply submit a ZippyApp application package which may include the Common Employment Application, Resume, and a Cover Letter. In your Cover Letter, please write a short paragraph describing yourself and why you would make a great addition to our team. ZippyApp is the Common Employment Application for online and mobile that allows you to apply for jobs with one click, and is being accepted at a growing number of businesses each day.

Job Description P&C Technician 1, 2, or 3 Powerserve Technologies is currently seeking Protection and Control (P&C) Technicians. These opportunities require that you travel to the job sites to perform the necessary work at Substations across Florida. Responsibilities of Position *Protection & Control Tech 1: · Attendance, dependability, reliability and perseverance are critical to our success. • Fluency in English language comprehension communication skills and understanding technical terminology are necessary. Continued self-improvement of those skills is a must., • Cooperation and teamwork are essential since we all work as part of one team., • Initiative to further one’s knowledge and perform tasks is necessary to keep up with changing technologies., • Quality in workmanship, of character and personality is essential in our employees as our reputation is built on it., • Good judgement is important. We stress doing what’s right over what’s easy., • Adaptability is a key attribute since tasks, work sites and necessary skill sets can change rapidly., • Creativity and curiosity are traits needed to continue to learn and understand the equipment, process and methods., • Organizational and time management skills are required to be productive because of the attention to detail required., • Teach applicable skills and knowledge to more junior technicians., • Demonstrate advanced proficiency in AC and DC circuit theory, electronics, transformers, 3 phase systems, Boolean Algebra, etc. Assist more junior technicians with learning., • Demonstrate thorough understanding of the theory of operation of basic relays and protection systems, devices, instrumentation transformers, SCADA, etc. Learn theory of operation of more advanced relays, protection systems, etc. Assist more junior technicians with learning this information., • Demonstrate proficiency with drawing symbiology, ANSI/IEEE relay function numbers and how different manufactures accomplish the functions. Assist more junior technicians with learning the symbols and function numbers., • Demonstrate logical problem-solving abilities., • Continue to learn, understand and demonstrate advanced testing methodologies and proper use of multimeters, test equipment and testing devices. Assist more junior technicians with learning testing methods, test equipment uses and theory and testing devices., • Draw schematic/elementary diagrams from verbal descriptions. Assist more junior engineers with understanding descriptions and how to translate into drawings., • Demonstrate understanding and use of good Human Performance Tools and techniques in testing and record keeping techniques. Provide guidance and explanation to more junior technicians., • Demonstrate ability to read utility and other technical drawings. Assist more junior technicians to develop this skill., • Demonstrate the ability to identify the physical location, equipment and orientation shown on the drawings. Assist more junior technicians in locating the physical equipment from drawings., • Demonstrate familiarity with hand and power tools and their usages. Monitor more junior technicians for proper tool selection and use; provide instruction as needed., • Complete assigned paperwork, test forms and procedures in a timely manner. Understand the reasoning behind the forms. Explain the documents and forms to more junior technicians as needed., • Assemble control panels from drawings., • Develop leadership and responsibility., • Follow all Human Performance, Safety and Environmental rules and use all procedures, processes and tools available. Take proactive steps to keep everyone safe. Stop anyone not following the rules., • Proficiency in identifying all substation equipment and explaining the function of it. Assist more junior technicians with identification and function of this equipment., • Be an example to others. Let your actions be a model for other teammates. *Protection & Control Tech 2 • Attendance, dependability, reliability and perseverance are critical to our success., • Fluency in English language comprehension communication skills and understanding technical terminology are necessary. Continued self-improvement of those skills is a must., • Cooperation and teamwork are essential since we all work as part of one team., • Initiative to further one’s knowledge and perform tasks is necessary to keep up with changing technologies., • Quality in workmanship, of character and personality is essential in our employees as our reputation is built on it., • Good judgement is important. We stress doing what’s right over what’s easy., • Adaptability is a key attribute since tasks, work sites and necessary skill sets can change rapidly., • Creativity and curiosity are traits needed to continue to learn and understand the equipment, process and methods., • Organizational and time management skills are required to be productive because of the attention to detail required., • Demonstrate proficiency in AC and DC circuit theory, electronics, transformers, 3 phase systems, Boolean Algebra, etc., • Demonstrate understanding of the theory of operation of basic relays and protection systems, devices, instrumentation transformers, SCADA, etc. Learn theory of operation of more advanced relays, protection systems, etc., • Demonstrate familiarity with drawing symbiology, ANSI/IEEE relay function numbers and how different manufactures accomplish the functions., • Demonstrate logical problem-solving abilities., • Continue to learn, understand and demonstrate advanced testing methodologies and proper use of multimeters, test equipment and testing devices., • Demonstrate the ability to draw schematic/elementary diagrams from verbal descriptions., • Demonstrate understanding and use of good Human Performance Tools along with testing and record keeping techniques., • Demonstrate ability to read and understand utility and other technical drawings., • Demonstrate the ability to identify the physical location, equipment and orientation shown on the drawings., • Demonstrate familiarity with hand and power tools and their usages., • Complete assigned paperwork, test forms and procedures in a timely manner. Understand the reasoning behind the forms., • Assemble control panels from drawings., • Develop leadership and responsibility., • Follow all Human Performance, Safety and Environmental rules and use all procedures, processes and tools available. Take proactive steps to keep everyone safe., • Proficiency in identifying most substation equipment and explain the it., • Be an example to others. Let your actions be a model for other teammates. *Protection & Control Tech 3 • Attendance, dependability, reliability and perseverance are critical to our success., • Fluency in English language comprehension communication skills and understanding technical terminology are necessary. Continued self-improvement of those skills is a must., • Cooperation and teamwork are essential since we all work as part of one team., • Initiative to further one’s knowledge and perform tasks is necessary to keep up with changing technologies., • Quality in workmanship, of character and personality is essential in our employees as our reputation is built on it., • Good judgement is important. We stress doing what’s right over what’s easy., • Adaptability is a key attribute since tasks, work sites and necessary skill sets can change rapidly., • Creativity and curiosity are traits needed to continue to learn and understand the equipment, process and methods., • Organizational and time management skills are required to be productive because of the attention to detail required., • Demonstrate basic understanding of AC and DC circuit theory, electronics, transformers, 3 phase systems, Boolean Algebra, etc., • Learn the theory of operation of relays from different manufactures and protective systems, devices, instrumentation transformers, SCADA, etc. Teach theory to more junior technicians., • Learn drawing symbiology, ANSI/IEEE relay function numbers and how different manufactures accomplish the functions., • Demonstrate logical problem-solving abilities., • Learn, understand and demonstrate advanced testing methodologies and proper use of multimeters, test equipment and testing devices., • Learn to draw schematic/elementary diagrams from verbal descriptions., • Learn, understand and use good Human Performance Tools along with testing and record keeping techniques., • Learn to read and understand utility and other technical drawings., • Learn how to identify the physical location, equipment and orientation shown on the drawings., • Demonstrate familiarity with hand and power tools and their usages., • Learn how to complete assigned paperwork, test forms and procedures in a timely manner. Learn to understand the reasoning behind the forms., • Learn how to assemble control panels from drawings., • Begin developing leadership and responsibility., • Learn and follow all Human Performance, Safety and Environmental rules and use all procedures, processes and tools available. Take proactive steps to keep everyone safe., • Learn to identify all substation equipment and explain the function it., • Be an example to others. Let your actions be a model for other teammates. Qualifications: P&C Tech 1: Required: Associate of Science in applied field (electronics, power systems, information). Associates of Arts with pre-electrical engineering electives. Competent in the understanding and application of Algebra and Trigonometry as it pertains to electrical theory and testing calculations. Proficiency with calculations of 3 phase, transformer, circuit analysis, etc. parameters. Proficiency in setting and testing overcurrent microprocessor-based relays. One (1) year of field experience in controls or control panel wiring. Preferred: Familiarity with ANSI/NETA testing requirements and procedures. Three (3) years of field experience in protection and control systems. P&C Tech 2: Required (Basic): Associate of Science in applied field (electronics, power systems, information). Associates of Arts with pre-electrical engineering electives. Competent in the understanding and application of Algebra and Trigonometry as it pertains to electrical theory and testing calculations. Proficiency with calculations of 3 phase, transformer, circuit analysis, etc. parameters. Proficiency in setting and testing overcurrent microprocessor-based relays. One (1) year of field experience in controls or control panel wiring. Preferred: Familiarity with ANSI/NETA testing requirements and procedures. Two (2) years of field experience in protection and control systems. P&C Tech 3: Required Qualifications: High school diploma with experience wiring control panels or similar products. Competent in the understanding and application of Algebra and Trigonometry as it pertains to electrical theory and testing calculations. Familiarity with 3 phase and Introductory experience with setting and testing overcurrent microprocessor-based relays. Experience in field control or control panel wiring. Preferred: Associate of Science in applied field (electronics, power systems, information). Associates of Arts with pre-electrical engineering electives. One (1) year documentable experience in control panel wiring and protection and control systems. Skills and Characteristics: Self-Motivated, detail and goal oriented. Dependability and punctuality. Mechanical aptitude. Studious and motivated to learn. Proficient in hand and power tool use. Attentive to detail. Time organization. Leadership.

Job DescriptionDescription: TRAK TECOM designs, builds, and delivers advanced RF electronic solutions and antenna systems for mission-critical performance across the aerospace and defense industry. Our RF microwave and antenna solutions support Electronic Warfare (EW), Intelligence, Surveillance, and Reconnaissance (ISR), Radar, Positioning, Navigation, and Timing (PNT), Telemetry, Tracking, Command & Datalink, and Communications helping customers achieve reliability, resilience, and high performance in the harshest operating environments. We are seeking a highly motivated Electrical Engineering Intern to support engineering activities within a DoD-cleared environment. This position is ideal for an upper-level undergraduate student pursuing a Bachelor of Science in Electrical Engineering (BSEE) who is interested in gaining hands-on experience in a professional engineering setting. The intern will work alongside experienced engineers on real-world projects involving circuit design, analysis, testing, and system integration. Must be local to the Tampa, FL area and available to work on-site for Summer 2026. Requirements: Responsibilities: • Assist in the design, analysis, and testing of electrical and electronic systems, • Support development and troubleshooting of analog and digital circuits, • Participate in laboratory testing, data collection, and documentation of results, • Contribute to schematic capture, PCB layout reviews, and basic simulation tasks, • Assist with embedded systems and microprocessor-based designs, • Write and maintain technical documentation, test procedures, and reports, • Experience with circuit simulation tools (e.g., SPICE, AWR, HFSS, or similar), • Familiarity with PCB design tools (e.g., Altium, Cadence Allegro), • Hands-on lab experience with oscilloscopes, spectrum analyzers, and signal generators, • Exposure to RF, communications, or high-speed digital design, • Currently pursuing a BSEE from an ABET-accredited university, • Upper-level undergraduate (junior or senior) and formally admitted into the EE program, • Completed or currently enrolled in coursework covering: Electric Circuits, Electronics, Microprocessors / Embedded Systems, Programming (e.g., C, C++, Python, or similar) or Electromagnetics, • Practical, hands-on engineering experience in a professional environment, • Exposure to real-world DoD-related engineering projects, • Mentorship from experienced engineers

Job Description Position Summary Description Maintains all electrical and electronic equipment associated with the Energy Management Control Center (including digital computer systems, power supply systems, recorders, and instrumentation and communications equipment) in proper operating condition. Essential Functions • Installs, maintains, and checks the master station Supervisory Control and Data Acquisition (SCADA) equipment at the Energy Management Control Center (EMCC) and remote terminal units in the field., • Maintains and installs Strip Chart Recorders, Display Boards, and related electrical and electronic systems., • Maintains computer terminals and teletype equipment., • Troubleshoots and repairs all EMCC related electronics and electrical systems, some to the component level., • Maintains equipment logs and maintenance records as directed on all equipment and systems., • Reports equipment maintenance problems and failures with recommendation of corrective action., • Maintains all EMCC Power Supply Equipment including the Uninterruptable Power Supply (UPS) emergency diesel generator, storage batteries, and all associated switches, panels, and wiring., • Monitors and maintains EMCC computer related air conditioning equipment., • Performs other duties as applicable to the position or as assigned., • Installs, maintains, and checks the master station Supervisory Control and Data Acquisition (SCADA) equipment at the Energy Management Control Center (EMCC) and remote terminal units in the field., • Maintains and installs Strip Chart Recorders, Display Boards, and related electrical and electronic systems., • Maintains computer terminals and teletype equipment., • Troubleshoots and repairs all EMCC related electronics and electrical systems, some to the component level., • Maintains equipment logs and maintenance records as directed on all equipment and systems., • Reports equipment maintenance problems and failures with recommendation of corrective action., • Maintains all EMCC Power Supply Equipment including the Uninterruptable Power Supply (UPS) emergency diesel generator, storage batteries, and all associated switches, panels, and wiring., • Monitors and maintains EMCC computer-related air conditioning equipment., • Performs other duties as applicable to the position or as assigned., • NERC Compliance: Performs NERC Compliance Program roles if/as designated in Seminole’s Standard Ownership Matrix (SOM) including ongoing evidence retention in “audit-ready” form. You should also be familiar with Seminole’s Enterprise Internal Compliance Program (ENT-GCD-RGC-EP-054) to further your understanding of Seminole’s compliance program and the context of your duties and responsibilities attendant to your designation in the SOM. Qualifications and Education Requirements Associate’s degree in Electronics or equivalent. Two (2) years of experience in the maintenance of electronic/digital equipment and/or experience in the operation and maintenance of equipment associated with telecommunications systems is desirable. Electric utility experience preferred. Core Competencies: Adaptable, Collaborative, Conscientious, Critical Thinking, Outcome Driven, Professional Technical Competencies/Skills: • Electronic and Digital Telecommunications, • Electric Theory and Principles, • Effective verbal/nonverbal, listening, and written communications, • Problem Solving, • Analytical Thinking, • Work Independently Physical Requirements Must be able to follow established protective measures including, wearing required personal protective equipment (PPE). May require the use of ear, eye, and head protection equipment. Hand and power tools including electric drills, saws, and soldering equipment are used in this position. Moving heavy test equipment up to 50 pounds is required. Must have a valid driver's license with an acceptable Motor Vehicle Report. Working Conditions Some travel and work outside of normal business hours. While working in certain areas of the plant there is the potential for exposure to hazards typical of an industrial working environment. Subject to call out at any time in response to Energy Management Control Center (EMCC) control systems or equipment problems. Frequent travel to SECI remote facilities for corrective and preventive maintenance with occasional overnight travel required. Conditions in the field may include extreme temperatures and noise levels. Occasional travel to vendor/manufacturer facilities for training and equipment checkout. Subject to being on an on-call shift that rotates; must be within an hour of EMCC while on call. Disclaimer - Management may modify this job description at any time and may require the performance of additional duties, or modification of physical requirements, with or without advance notice.

Job Description Position Summary Description Conducts transmission studies to ensure reliability and support the expansion of the electric transmission system, collaborating with diverse stakeholders that include Florida Reliability Coordinating Council, Seminole members, internal departments, and industry partners. The work includes, but not limited to, power flow analysis, voltage studies, short circuit analysis, and implementation of regulatory reliability standards. Performs studies and analyses that reflect current and future transmission system configurations and recommends upgrades, system modifications and/or expansion to transmission system facilities based on load growth, generation interconnection, and identified reliability needs. The position analyzes data, drafts reports and provides engineering recommendation and works under the technical direction and guidance of more senior engineers. Qualifications and Education Requirements Bachelor of Science Degree in Electrical Engineering from an ABET-accredited institution is required. Degree concentration or significant coursework in power system is preferred. Proficiency in applying foundational engineering concepts, gained through educational coursework, is essential. Strong analytical skills and proficiency in power system simulation & technical documentation is a plus. Core Competencies: Adaptable, Collaborative, Conscientious, Critical-Thinking, Outcome-Driven and Professional Technical Competencies/Skills: • Strong foundation of electrical engineering principles, • Adept at navigating technical documents (drawings, manuals, etc.), • Computational problem-solving expertise to engineering problems, • Programming proficiency, • Effective verbal/nonverbal, listening, and written communications, • Critical thinking and problem solving, • Planning and organization, • Proactive initiative and attention to detail, • Self-starter and eager to learn Essential Functions • Participates in the development and review of electrical computer simulations models of transmission lines and substations for transmission planning databases, • Supports the development and review of innovative and environmentally acceptable transmission plans to ensure safe, reliable, effective, and efficient operations of the electric transmission system, • Participates in transmission interconnection studies and affected system studies for generation owners that address feasibility, system impacts, economics, and project execution scheduling, • Provides input and support to other internal departments on transmission matters such as substation capacity increases, transformer upgrades and/or replacements, line conductor replacements, operations support, and reliability upgrades., • Develops Python scripts enabled programs for computer simulation tools, • May participate in initiatives, work groups and/or industry forums that supports the inclusion of Seminole’s interests., • Participates in the power system steady-state contingency analysis, short circuit analysis, dynamic stability analysis and single point of failure analysis of the interconnected transmission system, • Supports the development and implementation of documentation for transmission planning compliance with the NERC Reliability Standards and FRCC modeling requirements, • Participates in detailed technical analysis for the development of long-term transmission system expansion plans, • Analyzes data, drafts reports, and collaborates with colleagues on assigned tasks, • Assists in the preparation of reports, documents and presentations as needed, • Performs other duties as applicable to the position or as assigned, • NERC Compliance: Performs NERC Compliance Program roles if/as designated in Seminole's Standard Ownership Matrix (SOM) including ongoing evidence retention in "audit-ready" form. You should also be familiar with Seminole's Enterprise Internal Compliance Program (ENT-GCD-RGC-EP-054) to further your understanding of Seminole's compliance program and your duties and responsibilities in the SOM. Internal/External Stakeholders and Industry Groups • Florida Reliability Coordinating Council (FRCC), • Federal Energy Regulatory Commission (FERC), • North American Regulatory Corporation (NERC), • Institute of Electrical and Electronics Engineers (IEEE), • Neighboring Utilities, • Seminole’s Engineering and Maintenance, Operations Planning, Transmission Services, Load Forecasting, Finance, Budgets and Planning, Legal, and Environmental Physical Requirements Must be able to wear personal protective equipment (PPE), and respiratory equipment may be required. Must possess a valid Florida driver’s license with an acceptable motor vehicle report. Working Conditions Normal office conditions. Some travel and work outside of normal business hours to technical seminars, conferences, professional meetings, and meetings with Member cooperative headquarters may be required. While working in certain areas of the plant, there may be extreme temperatures and conditions. “Disclaimer - Management may modify this job description at any time and may require the performance of additional duties, or modification of physical requirements, with or without advance notice.”

Job Description Embedded Electronics Engineer Tampa, FL Company Overview Detect-ION is a deep-tech startup founded in 2021 and develops next generation sensors for enhanced CBRNE (Chemical, Biological, Radiological, Nuclear, Explosives) awareness for a broad range of applications including, but not limited to, environmental monitoring, biomedical/health sciences, warfighter protection, situational awareness, and national defense/security. The Detect-ION team has a collective 75+ years of contract research and development experience, and through several recent prestigious DTRA, IARPA, DARPA awards, has developed several disruptive sensor technologies for a broad range of high-value chemical/biological sensing applications. Detect-ION develops sensors and systems in a dedicated 4000 sqft laboratory space located in Tampa, FL. We thrive in solving hard, high-value detection problems that require a multidisciplinary effort at the intersection of organic chemistry, biochemistry, gas chromatography, mass spectrometry, vacuum technology, data analytics, system engineering and AI/ML algorithms to produce the most pioneering sensing capability driven by mission-specific requirements from the US government and the industry. As a recent startup, Detect-ION is built on an agile and enthusiastic sponsored research and development model to continue to serve our US government stakeholders and clients, while we explore commercial markets for our maturing technologies. We thrive on efficient project execution through astute scientific problem-solving experience and diligent program management and risk mitigation ensuring the highest ROI to our clients. Position Overview Detect-Ion is seeking a seasoned Embedded Electronics Engineer (EEE) to join our scientific and system engineering team to support the development of next generation chemical-biological detection technologies. The position will be part of a highly coordinated technical team of research scientists, engineers and program managers working on innovative R&D projects for the US government and commercial stakeholders. The projects range from conceptual benchtop testbeds to prove the viability of a scientific concept to optimizing a fully integrated sensor prototype; to characterizing the repeatability and durability of the prototype system over prolonged periods of operation; to deploy our sensors/systems in operational environments for testing and validation. The EEE will interface with the scientists, system engineers (SEs), mechanical engineers (MEs) and program managers (PMs), and occasionally with subject matter expert contractors, to understand the envisioned system requirements and develop the control electronics requirements, electronic designs/circuit schematics, board layout and outsource the board fabrication and build up. Upon receiving these boards, the EEE will independently test and validate the board functionalities, troubleshoot issues, optimize circuit/layout designs, and support SEs and MEs in system-level integration, testing and optimization. This will require the EEE to be fully independent and accountable across embedded circuit design, layout, testing and firmware development to get to a working brassboard or prototype. Equally important, the candidate will provide compelling technical inputs to support program reviews, proposals, and business development activities for US Department of Defense (DoD) and Intelligence Community (IC) customers, as well as commercial clients, to expand our portfolio into innovative technologies and application base. The candidate will have the room to display their initiatives and passion with the potential to lead current and incoming projects/tasks. The right candidate will also have the opportunity to lead the system engineering team with the growth of the company and as we transition into the commercial markets. The candidate will report directly to the Founder/CEO of the company. Minimum Qualifications – BS/MS/PhD degree in Electrical Engineering. – 15-20 years in hardware design, testing and optimization. – Extremely proficient in Electronic Circuit Design: Analog, Digital, Embedded Control System Design utilizing Microcontrollers / DSP (8, 16, 32 bit), FPGA and CPLD, Motor Control, Communication Standards (RS485 / RS-422, RS-232, CAN, USB 2.0, LIN, SPI, I2C, JTAG), Power Supply Design (Linear and DC/DC Switching Regulator) – Proficient in Altium Designer, Mentor Graphics Schematic Capture, OrCAD Schematic Capture and PSpice, Microsoft Excel, Word, Power Point, Project, Visio, Mathcad. – Programming ability: C, VHDL, Intel 8051, Motorola 6800 and Microchip Assembly, Pascal, Basic. – Proficient with benchtop electronics lab instruments (such as oscilloscopes, LCR meters, and logic analyzers) to conduct early testing and validation. Desirables Experience – Design, development, testing and certification (such as IEC 60601-1) of biomedical devices. – Familiarity with FDA regulatory strategies. – Design for manufacturing. – Environmental testing to meet ruggedization standards (such as MIL-STD-810H). – Knowledge of analytical instrumentation design such as air samplers, gas chromatograph, mass spectrometers, electron multipliers, switching high-voltage waveforms, vacuum component and integration, high-speed DC motor drivers, and RF electronics. – Critical and independent thinker with a keen sense of accountability about their design and performance. – Ability to work in an agile team environment. – Strong project management skills within budget and schedule. – Capability to work under pressure and with a sense of urgency. – Excellent verbal and written communication skills – Ability and passion to lead a system engineering team. Employment Status Full Time Other Requirements U.S. Permanent Resident or U.S. Citizen EOE/AA Detect-Ion is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. Background Check Candidates who receive a conditional offer of employment will be subject to a background check. Company DescriptionDetect-ION is a deep-tech startup founded in 2021 and develops next generation sensors for enhanced CBRNE (Chemical, Biological, Radiological, Nuclear, Explosives) awareness for a broad range of applications including, but not limited to, environmental monitoring, biomedical/health sciences, warfighter protection, situational awareness, and national defense/security. The Detect-ION team has a collective 75+ years of contract research and development experience, and through several recent prestigious DTRA, IARPA, DARPA awards, has developed several disruptive sensor technologies for a broad range of high-value chemical/biological sensing applications. Detect-ION develops sensors and systems in a dedicated 4000 sqft laboratory space located in Tampa, FL. We thrive in solving hard, high-value detection problems that require a multidisciplinary effort at the intersection of organic chemistry, biochemistry, gas chromatography, mass spectrometry, vacuum technology, data analytics, system engineering and AI/ML algorithms to produce the most pioneering sensing capability driven by mission-specific requirements from the US government and the industry. As a recent startup, Detect-ION is built on an agile and enthusiastic sponsored research and development model to continue to serve our US government stakeholders and clients, while we explore commercial markets for our maturing technologies. We thrive on efficient project execution through astute scientific problem-solving experience and diligent program management and risk mitigation ensuring the highest ROI to our clients.Detect-ION is a deep-tech startup founded in 2021 and develops next generation sensors for enhanced CBRNE (Chemical, Biological, Radiological, Nuclear, Explosives) awareness for a broad range of applications including, but not limited to, environmental monitoring, biomedical/health sciences, warfighter protection, situational awareness, and national defense/security. The Detect-ION team has a collective 75+ years of contract research and development experience, and through several recent prestigious DTRA, IARPA, DARPA awards, has developed several disruptive sensor technologies for a broad range of high-value chemical/biological sensing applications. \r\nDetect-ION develops sensors and systems in a dedicated 4000 sqft laboratory space located in Tampa, FL. We thrive in solving hard, high-value detection problems that require a multidisciplinary effort at the intersection of organic chemistry, biochemistry, gas chromatography, mass spectrometry, vacuum technology, data analytics, system engineering and AI/ML algorithms to produce the most pioneering sensing capability driven by mission-specific requirements from the US government and the industry.\r\nAs a recent startup, Detect-ION is built on an agile and enthusiastic sponsored research and development model to continue to serve our US government stakeholders and clients, while we explore commercial markets for our maturing technologies. We thrive on efficient project execution through astute scientific problem-solving experience and diligent program management and risk mitigation ensuring the highest ROI to our clients.

Job DescriptionDescriptionJob Title: Junior Electrical Engineer (EIT / PE Track)Location: Tampa, Florida (Onsite Required)Employment Type: Full-Time, W2Compensation: $55,000 to $65,000 annual salarySchedule: Monday through Friday, 7:30 AM to 4:30 PMTravel Expectations: Occasional day travel to local sites in Central Florida. No overnight or out-of-state travel required. About the Opportunity:This is a high-impact opportunity for an early-career electrical engineer to build real-world experience in a full-service architecture and engineering environment. Based in South Tampa, our firm delivers public-sector design projects across Florida—including schools, universities, libraries, municipal buildings, and industrial facilities. You will be mentored by licensed Professional Engineers and gain direct exposure to multidisciplinary collaboration. This position is designed for someone seeking to grow into a licensed P.E. and ultimately lead projects in the built environment. Position Overview:As a Junior Electrical Engineer, you will support the electrical team on design documentation, modeling, calculations, and coordination. You’ll be working under the supervision of a licensed P.E., contributing to lighting and power system design, and developing proficiency in Revit and EasyPower software. Ideal candidates are sharp, proactive, and ready to grow in a fast-paced professional setting that emphasizes internal mentorship, hands-on design, and team culture. Key ResponsibilitiesDesign Support & Technical Execution • Assist in the design of electrical systems for public-sector and institutional buildings, • Perform calculations for lighting, power, distribution, and basic coordination, • Participate in site visits and field verifications, • Work side-by-side with architectural, structural, and mechanical engineers, • Respond to markups and guidance from senior P.E.s, • Attend internal coordination meetings and gain exposure to client presentations, • Participate in LEED and sustainable design efforts where applicable, • Document time and assignments accurately using firm’s project tracking system, • Bachelor’s degree in Electrical Engineering from an ABET-accredited program, • Engineer-in-Training (EIT) certification, or eligible within 12 months, • Strong interest in building electrical systems design (not electronics or defense), • Proficiency or coursework in Revit, AutoCAD, and electrical design software, • Solid written and verbal communication skills, • Ability to work onsite full-time in Tampa, FL, • U.S. work authorization; E-Verify eligible, • Master’s degree in Electrical Engineering, • Internship or co-op experience in the A/E/C industry, • Familiarity with EasyPower or similar electrical modeling tools, • Health Insurance (75% employer-paid), • Dental and Vision Insurance (available through pre-tax payroll deduction), • $20,000 Company-Paid Life Insurance, • Long-Term Disability Insurance (required participation), • 401(k) Plan with employee-managed contributions, • Profit Sharing (based on firm performance), • Paid Time Off: Two weeks vacation (accrued), 3 personal days, 6 paid holidays, • Paid exam time (up to 8 hours) and reimbursement for licensure exam after 1 year, • Must pass FDLE Level II background screening, • Must meet E-Verify eligibility, • Recent grad or early-career engineer with an EIT or strong intent to pursue licensure, • Curious, accountable, and team-oriented, • Interested in public buildings and civic infrastructure, not product design or defense, • Comfortable working onsite and interfacing with real project teams, • Open to feedback and passionate about becoming a licensed P.E., • Associate, • Engineering Services, • Full-time, • Engineering, • Electrical Engineering

Company Overview: Century Fasteners Corporation, established in 1955, is an international master distributor of fasteners and non-fastener products, including military, aerospace, commercial, and electronic components, representing premier manufacturers in the industry. We have multiple locations throughout the United States with our corporate headquarters located in Elmhurst, NY. Concentrating our priority on customer service, we have obtained a stellar reputation within the industry. That reputation is built by our greatest asset...our employees. Due to our continued growth and success, we are currently seeking a Quality Inspector to join our team. Position Overview: Quality Control Inspectors are primarily responsible for the inspection of materials and finished products received to the specification outlined on the order. This position is crucial in ensuing product safety and compliance to product and customer requirements. Essential Job Functions: \n • Inspect Products: Examine part and finished products in accordance with inspection plans, customer requirements for defects or deviations from specifications, engineering drawings, and customer requirements using precision measuring tools and equipment. Escalating any deviations or quality issues to the Quality Control Supervisor.\n, • Conduct Tests: Perform regular inspection and teste to ensure compliance with quality standards and specifications throughout the distribution process.\n, • Document Findings: Record inspections results and maintain detailed reports of defects, nonconformities and corrective actions taken through detailed records, including but not limited to Nonconformance (NCR) documents. \n, • Documentation Review: Review extensive certification packages from suppliers to ensure conformance with customer requirements.\n, • Material Control: Interface with the Enterprise Resource Planning (ERP) tool and warehouse operations on electronic and physical material movements.\n, • Collaborate with Teams: Work closely with sales, operations, quality and management teams to address quality issues and implement improvements. \n, • Directly and indirectly responsible for product safety and quality.\n, • Perform other duties as required.\n\n Education / Certifications: \n • Required: High school diploma or GED.\n, • Preferred: Associate degree or vocational training in Electronics, Avionics, Aerospace Technology, or a related technical field.\n, • Preferred: 1 year of industry experience in quality inspections or related activities \n\n Qualifications / Competencies: \n • Knowledge or familiarity in working in regulated environment, such as ISO 9001 or AS9100 / AS9120 or similar Quality System standards is preferred\n, • Ability to read and interpret engineering drawings, specifications and certification requirements\n, • Experience using precision measurement equipment, such as micrometers, calipers, thread gauges, optical gauging equipment\n, • Basic mathematical skills, such as adding, subtracting, and rounding decimal numbers\n, • Ability to handle confidential and restricted information\n, • Strong attention to detail and organization, as well as rigorous documentation\n, • Possess strong work ethics, a positive attitude, and be detail oriented\n\n, • Possess strong written and verbal communication skills \n \n • Ability to work independently and cross-functionally\n, • Ability to work with all Microsoft office applications\n, • Must be able to fluently speak, write, and read in English\n\n Physical / Environmental Requirements: \n • Frequently required to sit, and to reach to use computers and other office equipment\n, • Occasionally required to stand for extended periods of time\n, • Frequently required repetitive movements of wrists, hands, and/or finger\n, • Ability to lift 45 lbs.\n, • Must meet vision and color blindness standards, verified by medical documentation. New hires must pass an eye test before starting employment, and retesting occurs annually\n, • Office / Warehouse environment may vary in temperature depending on the season\n, • Office / Warehouse collaborative space with forklifts and other equipment in motion-safety is our top priority.\n\n EOE Disability/Veteran

Partner with engineers, production supervisors, and team leads on product quality and status. Accept ownership of product quality by identifying issues prior to product acceptance. Two years of electronics manufacturing Quality related experience.

What We Look For In a Robotics Tutor Advanced Subject Mastery: Deep knowledge of robotics fundamentals including mechanical design, electronics, sensors, actuators, microcontrollers, programming for robots, control systems, and competition robotics platforms. Curriculum Awareness & Adaptive Instruct

Job Description Job Overview The Supervisor, Production leads a team of technicians responsible for assembling, integrating, and testing systems and related aerospace components. This role manages daily production operations to meet safety, quality, schedule, and cost objectives. The Supervisor provides hands-on leadership, ensures compliance with AS9100/ITAR processes, removes barriers to flow, and supports crossfunctional alignment with Engineering, Quality, Supply Chain, and Planning. Essential Functions • Daily Operations & Team Leadership, • Lead, coach, and develop a team of production technicians and Lead Technicians., • As a member of the management team, execute business decisions and strategic priorities., • Assign work, manage staffing levels, and coordinate daily priorities to meet production schedules., • Conduct daily tier meetings and communicate key metrics, risks, and requirements., • Maintain a high-performing team environment focused on accountability and continuous improvement., • Facilitate shift handoff and ensure accurate communication across workgroups., • Safety & Compliance, • Enforce all safety requirements, conduct safety walks, and immediately address unsafe conditions., • Ensure ITAR, ESD, FOD, and hazardous-material handling procedures are followed., • Maintain a clean and compliant work area aligned with 5S and lean standards., • Quality & Process Control, • Ensure adherence to work instructions, drawings, torque specifications, and configuration control., • Support First Article builds, inspections, and readiness for customer and regulatory audits., • Partner with Quality to resolve in-process issues, support MRB/NCR processes, and drive corrective actions., • Verify all documentation (DHR, travelers, checklists) is completed correctly and on time., • Monitor and communicate engineering or process changes, • Schedule, Material Flow & Coordination, • Ensure production tasks are completed within planned cycle times and to schedule., • Coordinate with Planning, Supply Chain, and Materials teams to ensure parts, kits, and tooling are available when needed., • Escalate shortages, engineering issues, and bottlenecks proactively., • Support and maintain capacity planning and labor forecasting., • Technical and Operational Support, • Provide hands-on support for complex assemblies or troubleshooting as needed., • Collaborate with Manufacturing Engineering to improve processes, update work instructions, and support new product introductions., • Identify opportunities to reduce waste, improve efficiency, and enhance product reliability., • Employee Development & Performance Management, • Conduct performance reviews, coaching sessions, and corrective action (as needed)., • Build and maintain a strong cross-trained workforce., • Support talent acquisition, onboarding, and technical skills development., • Perform other duties as required., • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices. List skills, knowledge and attributes in the qualifications and competencies section. Review the leadership competencies and edit for the department name. • Qualifications and Competencies, • Strong problem-solving skills and makes sound decisions., • Strong ability to interpret engineering drawings, schematics, and technical documentation., • Demonstrated success managing teams in a fast-paced, dynamic production setting., • Familiarity with MRP/ERP systems and production scheduling tools preferred, • Intermediate skill set (demonstrated) utilizing MS Excel Preferred, • Demonstrates effective leadership and supports team development., • Strong ability to communicate clearly, • Strong ability to learns and utilize technical tools and systems efficiently., • Ability to maintain high standards of accuracy and work quality., • Consistently able to promote and practices safe work behaviors., • Ability to plans, organize, and prioritize work to meet deadlines., • Ability to identify and implement opportunities for continuous improvement., • Leadership Competencies, • Directs and provides expert knowledge in the day-to-day function of the department., • Identifies, recruits, and retains top-notch talent., • Champions AEVEX's culture and empowers employees to take responsibility for their jobs and goals., • Coaches, mentors, engage and develop the team, including overseeing new employee onboarding and providing career development planning and learning opportunities., • Sets performance standards and encourages employee engagement and results through delegation, continuous feedback, goal setting, and performance management., • Maintains transparent communication. Appropriately communicates organization information through department meetings, one-on-one meetings, and appropriate email, and regular interpersonal communication., • Associates degree in manufacturing operations, business, technology, or related field (additional experience within a manufacturing operation will be accepted in lieu of a degree), • Bachelor's degree in manufacturing operations, Business, Industrial Engineering or similar preferred., • 5+ years of aerospace manufacturing, defense production, or complex assembly experience., • 2+ years of direct people leadership experience (Lead Tech, Team Lead, or Supervisor)., • Experience in AS9100 or other regulated manufacturing environments., • Experience in unmanned systems, aircraft integration, or electronics/mechatronics production preferred The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: • Frequently required to sit, and to reach to use computers and other office equipment, • Frequently required repetitive movements of wrists, hands, and/or fingers, • Occasionally required to lift up to 25 pounds Security Clearance AEVEX Aerospace is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws. About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits for qualified employees. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Job DescriptionDescription: ReturnQueen is an innovative service dedicated to making returns hassle-free. Whether it’s fashion, electronics, or household goods, we ensure a seamless process for our customers, helping them save time and reduce the hassle associated with returning online purchases. What we’re looking for: We are seeking a Part Time (Twice a week) Driver/Processor to join our fast-growing team. As a pivotal part of our operations, you will ensure that customer returns are handled with the utmost care and efficiency. Successful drivers put safety first and care deeply about customer expectations and satisfaction. Driver Responsibilities: • Safely transport goods between customer locations and our warehouse., • Ensure timely pick-up and delivery of packages., • Maintain accurate records of pick-ups, deliveries, and vehicle maintenance., • Provide exceptional customer service during interactions., • Adhere to all traffic and company regulations., • Able to lift packages (up to 50 lbs.) and be able to get in and out of a van numerous times throughout the day with or without reasonable accommodation., • Drivers will sometimes need to walk up flights of stairs to deliver, • Divers will interact in a positive and professional manner with customers and the general public while retrieving packages from customers’ homes and commercial locations, • Use hand held device for routing information, customer delivery information., • Inspect, sort, and process returned items., • Accurately print, pack, and ship orders, • Ensure the quality and condition of items before they are returned., • Maintain accurate records of all processed returns., • Coordinate with the operations team to handle support enquiries. Why You Should Work for ReturnQueen: • Medical, Dental, & Vision offered for Full-time employees (after 30+ days), • Vacation and Paid Time off (PTO) accrued over time, • Must be 21+ years of age, • Must have own transportation, • Mileage Reimbursement, • Good driving record - Motor Vehicle Record Check required, • Attention to detail., • Data entry skills, • Customer support experience(nice to have), • Must be able to lift up to 50 lbs. to chest, • Prior experience with Amazon, UPS, Fedex, • Prior experience handling high volume of pickups and deliveries, • Driver's License and Social Security Card, • or Passport

Job Description What is an electronic repair technician? Electronic repair technicians are responsible for set up, testing, troubleshooting, and repair of electronic equipment. What does an electronic repair technician do? Electronic repair technician duties include running performance analyses on electronic devices and reporting on results. They also troubleshoot and replace faulty components. Overall, electronic technician job responsibilities include: We are looking for an electronic repair technician to test and repair electronic equipment. You’ll test system performance, analyze and report on results. This role requires hands-on experience using various hand and power tools to calibrate and align system components and circuitry. To succeed in this position, you should also be able to comprehend and follow complex technical manuals and schematics. Responsibilities: · Testing and repairing electronic equipment · Troubleshoot to the component level · Recording of testing and repair data · Set up electronic systems and devices · Assemble and connect system components (e.g. cables) · Monitor and report on repair progress · Test system functionality and record data · Read and comprehend complex manuals and diagrams and schematics · Maintain parts inventory · Collaborate with engineers and other professionals on technical tasks · Use various tools to repair equipment Requirements and Skills: · Previous experience as electronic technician or similar role · Hands-on experience with electronic testing and circuitry · Familiarity working with various tools and equipment · MS Office and diagnostic software (e.g. PC-based software) · Associate’s degree or some college coursework in electronics or engineering preferred

Job DescriptionJob descriptions: We are looking for a technician who can perform various tasks such as diagnosing, troubleshooting and repairing devices. Computer troubleshooting, diagnosing and repairing is required. Soldering and console experience is preferred. The ideal candidate will be able to work independently, have extensive hands-on experience with our repairs, and will also be part of a team that develops new solutions to increase Home+ sale . Our technicians also provide guidance and assistance to customers as needed, so we're looking for a problem-solver with a history of providing solutions for customers. Tasks and responsibilities: • Diagnose, troubleshoot and repair devices, • Provide recommendations for problem resolution, • Explain complex technical issues to customers in a non-technical, simple to understand manner, • Provide repair and replacement estimates to customers, • Ensure that all repairs meet or exceed Asurion Tech Repair and Solutions quality standards, • Greet customers in a friendly manner and maintain a positive work environment, • Answer phone calls to the store with a professional, courteous and friendly demeanor, • Ensure that customers have an enjoyable experience by providing superior customer service and exceeding customer expectations, • Keep track of all devices and inventory while safeguarding all store stock, • Utilize the point of sale system to maintain an accurate record of customer information and a real0tie status of each repair, • Maintain the cleanliness and professional appearance of the storeBasic qualifications:, • Outstanding customer service skills, • Excellent technical, problem solving, and analytical skills, • Exceptional organization skills, • Strong written and oral communication skills, • Work well in team environment, • Ability to work flexible retail schedule , including weekends and holidays, • High school diploma or GED, • A passing background check (criminal and drug test), • Basic knowledge of Microsoft OfficePreferred Qualifications:, • Experience repairing and troubleshooting electronics, smartphones, PC/MACs, and game consoles, • 1+ years of customer service/retail sales experience, • Basic knowledge of mobile devices and operating systems

Job Description $3,900 Sign-on Bonus* Entry Level Sales Representative Power is where hustle meets purpose. It’s where leadership opportunities, life-enhancing benefits, and award-winning culture come together. Why? Because our people are our most important asset. And there’s no better investment than their happiness and growth. Our diverse, inclusive, and military-friendly culture has been recognized by Fortune Magazine as the #13 Best Company to Work for and #1 Best Workplace in Construction in the nation, and made the Military Times’ Best for Vets list. 90% of our sales leaders began their careers in entry-level sales positions, proving that Power is a meritocracy - the harder you work, the further you’ll go. The Sales Role Hiring Immediately - As a full-time sales representative, we’re preparing you to succeed in more than just your current position. You will be trained in all of our products and be able to deliver interactive sales presentations that will teach communication skills, negotiation tactics, strategic planning and problem solving. This role will provide you the foundational education and experience needed for all future career growth. The Responsibilities • Delivery of interactive sales presentations on eco-friendly, green products and services to customers, • Participation in ongoing sales training and coaching camps on a weekly basis, • Highly developed communication skills, • Ability to speak publicly with confidence and poise, • Self-motivated, discipline, and career oriented, • Open-minded with a passion for learning a wide-range of skills that will carry through a variety of career paths, • Naturally outgoing individual who thrives in human interaction, • $3,900 Sign-on bonus*, • Hourly Rate plus uncapped commission and bonuses, • Full medical, dental, life, and disability insurance plans that can be tailored to you and your family’s specific needs, • Subsidized child care and fertility benefits, • Paid parental leave, • Free health screenings & rewards for participation in wellness programs, • A comprehensive 401(k) retirement savings program, matched by Power, • Ample paid vacation and holidays, • An employee-relief fund, • Monthly opportunities for performance-based rewards, such as luxury vacations, high-end electronics, gift cards, and tickets to concerts and events, • Year-round events and activities, including an all expenses-paid music festival in Cancun, Mexico for you and a significant other, • Access to the latest technology, such as laptops, and tablets that will help you reach your sales goals faster and more efficiently, • Year-round volunteer opportunities, • Personal development - We provide books, courses and opportunity to attend leadership conferences, • Veterans encouraged to apply, • Riverview, FL, • Sarasota, FL *Power offers a $3,900 sign-on bonus, which will be paid weekly in $325 increments over the course of twelve weeks of initial training. The full sign-on bonus is contingent on successfully completing the twelve weeks of initial training. Power Home Remodeling Group is an equal opportunity employer, and we are committed to hiring a diverse and talented workforce. If you have a disability or special need that requires accommodation, please submit the accommodation request to Company DescriptionWhat makes Power one of Glassdoor’s Best Places to Work and Fortune’s #13 Best Company to Work For? Is it our unlimited earning potential and opportunities? Our commitment to improve the communities we live and work in? Our award-winning events? While these help boost our success, Power’s X-factor is an unwavering commitment to prioritize customer satisfaction and employee happiness above profit. Not what you expected from a home remodeling company? We didn’t think so. After all, exceeding expectations is what we do best. We’re rapidly expanding across the U.S. and hiring for roles in sales, marketing, tech, operations, and customer service. If you’re looking to join a team of caring, hardworking, and passionate individuals doing what they love, learn more about us below and apply today!What makes Power one of Glassdoor’s Best Places to Work and Fortune’s #13 Best Company to Work For? Is it our unlimited earning potential and opportunities? Our commitment to improve the communities we live and work in? Our award-winning events?\r\n\r\nWhile these help boost our success, Power’s X-factor is an unwavering commitment to prioritize customer satisfaction and employee happiness above profit. Not what you expected from a home remodeling company? We didn’t think so. After all, exceeding expectations is what we do best.\r\n\r\nWe’re rapidly expanding across the U.S. and hiring for roles in sales, marketing, tech, operations, and customer service. If you’re looking to join a team of caring, hardworking, and passionate individuals doing what they love, learn more about us below and apply today!

Job Description $3,900 Sign-on Bonus* Sales Representative Power is where hustle meets purpose. It’s where leadership opportunities, life-enhancing benefits, and award-winning culture come together. Why? Because our people are our most important asset. And there’s no better investment than their happiness and growth. Our diverse, inclusive, and military-friendly culture has been recognized by Fortune Magazine as the #13 Best Company to Work for and #1 Best Workplace in Construction in the nation, and made the Military Times’ Best for Vets list. 90% of our sales leaders began their careers in entry-level sales positions, proving that Power is a meritocracy - the harder you work, the further you’ll go. The Sales Role Hiring Immediately - As a full-time sales representative, we’re preparing you to succeed in more than just your current position. You will be trained in all of our products and be able to deliver interactive sales presentations that will teach communication skills, negotiation tactics, strategic planning and problem solving. This role will provide you the foundational education and experience needed for all future career growth. The Responsibilities • Delivery of interactive sales presentations on eco-friendly, green products and services to customers, • Participation in ongoing sales training and coaching camps on a weekly basis, • Highly developed communication skills, • Ability to speak publicly with confidence and poise, • Self-motivated, discipline, and career oriented, • Open-minded with a passion for learning a wide-range of skills that will carry through a variety of career paths, • Naturally outgoing individual who thrives in human interaction, • $3,900 Sign-on bonus*, • Hourly Rate plus uncapped commission and bonuses, • Full medical, dental, life, and disability insurance plans that can be tailored to you and your family’s specific needs, • Subsidized child care and fertility benefits, • Paid parental leave, • Free health screenings & rewards for participation in wellness programs, • A comprehensive 401(k) retirement savings program, matched by Power, • Ample paid vacation and holidays, • An employee-relief fund, • Monthly opportunities for performance-based rewards, such as luxury vacations, high-end electronics, gift cards, and tickets to concerts and events, • Year-round events and activities, including an all expenses-paid music festival in Cancun, Mexico for you and a significant other, • Access to the latest technology, such as laptops, and tablets that will help you reach your sales goals faster and more efficiently, • Year-round volunteer opportunities, • Personal development - We provide books, courses and opportunity to attend leadership conferences, • Veterans encouraged to apply, • Riverview, FL, • Sarasota, FL *Power offers a $3,900 sign-on bonus, which will be paid weekly in $325 increments over the course of twelve weeks of initial training. The full sign-on bonus is contingent on successfully completing the twelve weeks of initial training. Power Home Remodeling Group is an equal opportunity employer, and we are committed to hiring a diverse and talented workforce. If you have a disability or special need that requires accommodation, please submit the accommodation request to Company DescriptionWhat makes Power one of Glassdoor’s Best Places to Work and Fortune’s #13 Best Company to Work For? Is it our unlimited earning potential and opportunities? Our commitment to improve the communities we live and work in? Our award-winning events? While these help boost our success, Power’s X-factor is an unwavering commitment to prioritize customer satisfaction and employee happiness above profit. Not what you expected from a home remodeling company? We didn’t think so. After all, exceeding expectations is what we do best. We’re rapidly expanding across the U.S. and hiring for roles in sales, marketing, tech, operations, and customer service. If you’re looking to join a team of caring, hardworking, and passionate individuals doing what they love, learn more about us below and apply today!What makes Power one of Glassdoor’s Best Places to Work and Fortune’s #13 Best Company to Work For? Is it our unlimited earning potential and opportunities? Our commitment to improve the communities we live and work in? Our award-winning events?\r\n\r\nWhile these help boost our success, Power’s X-factor is an unwavering commitment to prioritize customer satisfaction and employee happiness above profit. Not what you expected from a home remodeling company? We didn’t think so. After all, exceeding expectations is what we do best.\r\n\r\nWe’re rapidly expanding across the U.S. and hiring for roles in sales, marketing, tech, operations, and customer service. If you’re looking to join a team of caring, hardworking, and passionate individuals doing what they love, learn more about us below and apply today!

Job DescriptionDescription: Who we are: Aerzen USA Corp. is an international manufacturer of positive displacement blowers, hybrid blowers, screw compressors and turbo blowers. These high-quality machines are used for air and gas applications across many essential industries, including; Wastewater, Cement, Biogas, Pharmaceutical and Food, among many others. We are One Team, and we Empower our team members to be both Inquisitive and Evolutionary. What we offer: Aerzen USA offers a competitive salary; generous health benefits (to include 96% company-paid benefit plans) with company HSA contribution; a 401(k) with company match; a tuition reimbursement program; and a profit share bonus package; along with the opportunity to work with a dynamic group of professionals. What You’ll Do: As a Field Service Technician, you will perform and carry out all tasks related to installing, assembling, servicing, and repairing Aerzen products. You are also responsible for providing customers with prompt, professional and high-quality service. Work is performed at our location and/or at our customer’s location. Services provided may be scheduled or on-demand. Overnight travel on short notice is often required. 100% travel, often four nights away weekly, on a continuous basis. Performs startups, equipment inspections, troubleshooting, repairs and/or preventive maintenance service on all Aerzen Products at customer sites; Represent Aerzen in professional and courteous manner following all Aerzen and customer safety requirements. Installing, configuring, calibrating and maintaining control, measurement and indicating instrumentation (pneumatic, analog & digital); Installing and terminating electrical, pneumatic and fluid connections; Understand controls narratives and analyze/troubleshoot process application related issues. Analyzing and correcting communication issues; Properly address TCP/IP networks and RS-485 communications. Perform repairs and assembly on Aerzen Products; Disassemble; assess damage and evaluate failures on machines; diagnose problems with Aerzen machines by evaluating material condition and asking the customer questions; demonstrates the ability to offer machine-based recommendations; can identify the root cause of a machine failure; Utilize defined procedures and a standard rebuild kit. Read, understand and use equipment diagrams, checklists, engineering drawings, and other process documentation to perform service tasks, assembly and repairs on Aerzen Products. Communicate with customers to discuss job requirements, provide recommendations and service options, listen to customer concerns, and provide status updates during service call and at completion. Assist engineering in plant design, modifications and hazard analysis. Complete written repair reports to document cause of failure, description of work performed, materials consumed, condition of equipment as received and as returned to the customer. Conduct customer training on Aerzen Products when onsite. Requirements: Education Requirements: High School Diploma or associate degree (2 years schooling) in electronics technology, or associated field. 5+ years of field experience will also be considered in lieu of degree. Experience: Over 4 years of Field Service and Repair experience. Skills & Other Requirements: Ability to read and interpret diagrams (dimensions, assembly, electrical) Proper use of micrometer, dial indicator, feeler gauges and coordinate measuring tools Ability to regularly use a forklift, ladder, hand tools, power tools, welding, calibrated measurement devices, hydraulic equipment is a must. Clean Driving Record Aerzen USA was founded in 1983 and is a wholly owned subsidiary of Aerzener Maschinenfabrik GmbH, a recognized world leader in the production of rotary positive displacement machines since 1868. Aerzen USA is headquartered in Coatesville, PA, with multiple offices and service centers throughout the United States. Aerzen USA designs and manufactures positive displacement blowers, hybrid blowers, screw compressors, and high-speed turbo blowers with installations around the world. The company specializes in wastewater treatment aeration, pneumatic conveying of bulk materials, and process gas conveying with high-efficiency equipment and world-class product service and support. For more information visit our website at: Aerzen USA Corp is an equal opportunity employer and selects employees on the basis of skills and experience. Aerzen USA ensures that all persons are entitled to equal employment opportunity without regard to race, color, gender, gender identity, sexual orientation, pregnancy, age, national origin, religion, marital status, ancestry, disability, veteran’s status, and any other characteristic protected under applicable federal, state, or local laws. All employment decisions and actions are based on merit and made without regard to any characteristic protected by state, federal or local law. All offers of employment at Aerzen USA Corp are contingent upon clear results of a thorough background check. In compliance with the Drug-Free Workplace Act of 1988, Aerzen USA Corp has a longstanding commitment to provide a safe, quality-oriented, and productive work environment. Alcohol and drug misuse poses a threat to the health and safety of Aerzen employees and to the security of the company's equipment and facilities. For these reasons, Aerzen USA Corp is committed to the elimination of drug and alcohol use and misuse in the workplace. Applicants being considered for hire must pass a drug test before beginning work. Refusal to submit to testing will result in disqualification of further employment consideration. This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including termination of employment. Employers can only use E-Verify once you have accepted a job offer and completed the Form I-9.

Job DescriptionDuties and Responsibilities This position supports USSOCOM programs including the Satellite Deployable Node (SDN) Family of Systems (FoS) and Naval Expeditionary Combat Command (NECC) Expeditionary Deployable Node (EDN). Supported components include U.S. Army Special Operations Command, Naval Special Warfare Command, Air Force Special Operations Command, Marine Corps Forces Special Operations Command, Joint Special Operations Command, and other Joint Warfighting Commands. The candidate will provide tactical Satellite Communications (SATCOM) support services to Naval Information Warfare Center (NIWC) Atlantic, ensuring mission-critical support for the Special Operations Communications Systems (SOCS) Integrated Product Team (IPT). This role supports Deployable Tactical SATCOM Systems and C5ISR Systems (Command, Control, Communications, Computers, Combat Systems, Intelligence, Surveillance, and Reconnaissance) for USSOCOM and other Expeditionary Warfighting Commands. The Candidate Will: • Perform SOCS Managed Tactical Deployable Communications FoS support inside and outside of the Contiguous United States (CONUS and OCONUS) as embedded support., • Have notable experience performing one or a combination of the following duties:, • Design, develop, and construct major units, devices, or equipment., • Conduct tests or experiments; analyze results; redesign or modify equipment to improve performance; and report results., • From general guidelines and specifications (e.g., size or weight requirements), develop designs for equipment without critical performance requirements that are difficult to satisfy, such as:, • Engine parts, • Research instruments, • Special-purpose circuitry, • Analyze technical data to determine applicability to design problems., • Select from several possible design layouts; calculate design data; and prepare:, • Layouts, • Detailed specifications, • Parts lists, • Estimates, • Procedures, • Check and analyze drawings or equipment to determine adequacy of design., • Plan or assist in planning tests to evaluate equipment performance., • Determine test requirements, equipment modifications, and test procedures., • Conduct tests using all types of instruments., • Analyze and evaluate test results and prepare reports on findings and recommendations., • Be capable of performing non-routine and complex assignments involving responsibility for:, • Planning and conducting a complete project of relatively limited scope or a portion of a larger and more diverse project., • Selecting and adapting plans, techniques, designs, or layouts., • Contacting personnel in related activities to resolve problems and coordinate work., • Reviewing, analyzing, and integrating the technical work of others., • May train and assist lower-level technicians., • Associate’s degree in engineering technology, math, or science; OR, • Formal electronics training from:, • Technical School, • Class A or B military school in electronics or communications, • Four-year electronics apprentice program, • Four (4) years with degree/formal training OR six (6) years with HS/GED of practical experience to include:, • Design, development, and construction of major units, devices, or equipment, • Conducting tests or experiments; analyzing results; redesigning or modifying equipment to improve performance, • Developing designs from general guidelines and specifications, • Preparing layouts, detailed specifications, parts lists, estimates, and procedures, • Planning and conducting tests to evaluate equipment performance, • Performing non-routine and complex assignments involving responsibility for planning and conducting projects Benefits Full-time employees are eligible for the following benefits enrollment from their date of hire: • Health Insurance - Centurum provides insurance for employee and dependent in a comprehensive package. Coverage for vision care is included. This option is available on a cost-sharing basis., • Dental Insurance - Available in conjunction with Health Insurance for an additional cost. Provides oral maintenance care for employee and dependent., • Basic Life Insurance - Company provided benefit for all full-time employees., • Supplemental Life Insurance - Optional life insurance coverage to employees at group rates., • Dependant Life Insurance - Optional coverage for dependents at a group rate., • Long Term Disability Insurance - Optional coverage available to employees at group rates., • Vacation and Sick Leave - Leave accrual is determined by length of service., • Holidays - The company observes ten paid holidays each year. Powered by JazzHR X2jg52cvWP

Job DescriptionCompany Description Smiths Detection is a global leader in detection and screening technologies for the protection of people and assets, supporting safety, security and freedom of movement in today’s world. At Smiths Group plc, we apply leading-edge technology to design, manufacture and deliver market-leading innovative solutions that meet our customers' evolving needs, and touch the lives of millions of people every day. We are a FTSE100, global business of around 14,600 colleagues, based in 50 countries. Our solutions have a real impact on lives across the planet, enabling industry, improving healthcare, enhancing security, advancing connectivity and supporting new homes. Our products and services are often critical to our customers’ operations, while our proprietary technology and high service levels help create competitive advantage. We welcome colleagues with a curious mind, who are happy with responsibility, enjoy a challenge and are attracted by the idea of working at a business with an almost 170-year history of innovation, and five global divisions, all experts in their field. We believe that different perspectives and backgrounds are what make a company flourish and are proud to be a company with values grounded in integrity, respect, ownership, customer focus, and passion. Job Description This position requires daily travel to locations in and around theAtlanta Metro area, including the airport. Troubleshoots, services, installs (deploys) and repairs Trace, X-Ray, CT X-Ray and Cargo Inspection equipment at customer sites. Maintains field service log and filing system to properly initiate, organize and maintain all field service and job files until work is completed Demonstrates initiative and dedication through positive use of downtime and an overall willingness and eagerness to consistently exceed customer and company requirements. Conducts follow up calls with the customer to ensure satisfaction of work. SPECIFIC DUTIES, ACTIVITIES AND RESPONSIBILITIES INCLUDE BUT ARE NOT LIMITED TO: • Responsible for meeting daily service repair needs and driving customer satisfaction, • Installs, repairs and maintains equipment in the field; provides customer training as required., • Documents all inspections, maintenance, repair work and submits paperwork in a timely basis, • Order, install, and return parts and manages repair parts cycle time, • Reviews all logs for open issues and prepares formal reports to customers as necessary., • Participates in Service Sales opportunities and assists with promoting and implementing revenue programs., • Ensures that tools and test equipment are properly maintained and calibrated, • Assesses product/equipment performance based on field support data; recommends modifications or improvements., • Seeks to provide technical support to customers and other service professionals as required., • May participate in site surveys, pilot program service activities, attend meetings, • Possesses basic technical knowledge on the company’s Trace and X-Ray technologies., • Maintains clear and concise business communication, both oral and written, • Establishes and maintains a close relationship with senior level FSE’s and Product Managers in order to support the needs of the customer and remain aware of current technical trends., • Exercises every available measure to control and minimize costs., • Travel, overtime and work hours other than Monday-Friday may be required., • Comply with and ensure department compliance with Company health, safety and environmental policies., • Comply with all applicable U.S. export control and security regulations., • Other duties as required.Qualifications Education/Training: Associate’s Degree/Related Trade Certification (electrical, electronic, mechanical)/Military Training (electrical, mechanical, electronics). (Equivalence achieved through comparative work and life experience of 1-3 years is acceptable work experience in a related electrical or mechanical field service role). Computer literacy; competency in use of all programs within MS Office Suite and aptitude for learning specialized software programs. Experience: Minimum of 1-3 years experience directly involved in troubleshooting and field repair of electrical and electronic systems and equipment. Knowledge/Skills: Individuals shall possess excellent communications skills and have a strong orientation for customer focus and teamwork. Must be responsive to all customer issues at all times. Must be willing & able to travel at short notice. Supervises: While supervision is not considered a primary responsibility of this position, there may be instances where supervision of others on a project basis may be required Background: This position requires Sensitive Security Information (SSI) access and vetting via the TSA. Applicant must successfully pass a federal background investigation. OTHER REQUIREMENTS: • Possess excellent organizational, communication, interpersonal skills with the ability to multitask several projects at once., • Excellent customer service skills and the ability to handle stressful situations., • Self-motivated, reliable, and accountable individual, • Possess excellent telephone skills, • Must be able to lift/carry 80 lbs., • Must be confident in the operation of carts, hoists, davit cranes, pallet jacks or other devices as defined in the manuals and Technical Advisory documentation., • Job requires full body mobility Work environment is typically considered to be wherever the customer of concern is located. Service will typically be rendered at airports, correctional facilities, courthouses, cruise ships or other locations as required. SDI is a Federal Contractor and a drug-free workplace. By submitting an application, I confirm that I understand that the Company has a right to require me to submit to a drug test prior to employment and at any time during my employment, to the extent permitted by law. Additional Information We offer… Join us and we’ll help build your career, with excellent training and opportunities for career growth across the business, both locally and globally. You’ll experience an inclusive environment, with strong leadership and a focus on safety and wellbeing. You’ll also have the flexibility to choose from a wide range of benefits to suit your lifestyle, offering you and your family support from a health and wellbeing, financial and lifestyle perspective. Join us and work for a world-leader, with the benefits and training to reward your dedication and skills. Be part of a team where we are making the world a safer place. The compensation for this position ranges from $63,800 - $87,560 per year. (Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant and alignment with internal and market data.) This role offers a competitive Business Profit Plan. Comprehensive benefits package including medical, dental, and vision insurance; 401(k) with company match; paid time off; and other benefits. For details, please visit the Reward & Benefits tab on our main careers page at . All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Equal Employment Opportunity PostersIf you’d like to view a copy of the company’s affirmative action plan or policy statement, please email . If you have a disability and you believe you need a reasonable accommodation in order to search for a job opening or to submit an online application, please e-mail call toll-free 877-703-1029. This email and phone number is created exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only messages left for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. Smiths Detection, Inc. participates in the Electronic Employment Verification Program. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Job DescriptionDescription: The JF Petroleum Group stands as a premier leader in the North American fueling infrastructure industry, offering comprehensive turn-key solutions for distribution, construction, and service needs. We serve a diverse clientele including retail fueling stations, commercial and government fleets, and emergency power customers. The Service Technician has a wide variety of skills and will be able to work through difficult problems. This person installs, maintains & repairs fuel dispensers; submersible fuel pumps; service station site controllers; credit card readers; cash register consoles; pumping PCW; tank & line monitoring equipment; various other types of equipment found in service station and convenience gas stations. • Work in a safe manner, • Understand and comply with applicable fire safety, OSHA, and EPA rules and regulations., • Observes, analyzes, and determines action for service and repair of equipment., • Performs necessary repairs to correct analyzed situations in a professional and productive manner., • Performs repairs and scheduled maintenance on equipment, • Performs factory authorized modifications per specifications., • Responsible for maintaining tools required for performing the job effectively and safely., • Responsible for following customer’s safety and housekeeping guidelines when performing repairs at customer site., • Resolve warranty calls on dispensers and tank monitors., • Perform service calls as needed on an after-hours basis, • Perform break fix and preventative maintenance on service station electronics, computers, and the fuel dispensing systems, including electronic, plumbing and mechanical work., • Provide quality customer service that exceeds customer expectation by ensuring that all assigned duties are completed in a cost-effective manner., • Perform required prerequisite work necessary to obtain and maintain certification from original equipment manufacturers., • Work with service project crew on service projects, assist lead technician(s) with the start-up, and commissioning of equipment., • Will be required to travel as needed., • Work with service project crew on service projects assist lead technician(s) with the start-up and commissioning of equipment.Requirements:, • High School Diploma or GED required, • Must have a valid Driver License, • Familiarity with computer operations and an aptitude for learning computer skills., • Gilbarco Dispenser certification and Veeder Root Tank Monitor certification, preferred., • Must be eligible to work in the United States., • Physical Requirements: Ability to repetitively lift, carry, push, pull up to 50 pounds, frequent bending, stooping, standing 8-10 hours per day., • Must be able to meet company’s employment requirements, which includes passing a drug screen, criminal background check, and MVR, if driving for the company JF Petroleum offers: • Competitive pay, • 401(k) with company match, • Paid time off, • Paid holidays, • Health benefits (eligible 1st of the month following 30 days) including Medical, Vision, Dental, Disability, • Life insurance-company provided, • Bonus program eligibility, • Paid training for field personnel, • Uniforms provided for field personnel, • Relocation Assistance will be considered for qualified candidates *JF Petroleum Group is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or any other legally protected status

Job Description EXPERIENCED FIELD TECHNICIANS NEEDED IN TAMPA, FL Cennox is seeking an enthusiastic Field Technician to join our expanding Field Services division. We are looking for passionate, experienced field professionals that are ready to work in an environment that allows you to grow as Cennox grows...Those with exceptional customer service and who can thrive in a dynamic team culture should apply. Also, willing to be cross trained to support our other lines of business, banking and retail. WHY SHOULD YOU JOIN THE CENNOX FAMILY? • Competitive Pay & Paid Training, • Company Vehicle, • Total Benefits Package including Retirement, Health, Dental, Vision, Life Insurance & more, • Paid Holidays, Vacation & Sick Package, • Company-provided tools, uniforms, and Android smartphone, • Flexible work schedule, paid training, and opportunity for travel In this role, you will service our customers by performing preventative maintenance, installation, determining issues with products, and training customers on the proper use of financial equipment throughout Tampa and surrounding areas. This position offers the chance to become part of a rapidly growing company. WHAT YOU'LL BRING: • 3+ years experience with low voltage electronics, mechanical systems, and computer experience; Safe or ATM Technical experience is a plus, • Electro-mechanical skills a must, ability to use basic hand tools including but not limited to multi-meter, voltmeter, volt-ohm meter, • Working knowledge of Microsoft Office (Word, Outlook, Excel), • Experience with mapping and routing applications such as MapPoint or Google Maps, • Ability to learn through telephone training, • Great communication/customer service skills and ability to interpret/execute written instructions, • Valid driver's license with a driving record in good standing and a reliable/insured vehicle, • Ability to communicate and provide excellent customer service, • Ability to lift/move 50 or more pounds, stand, climb, bend, stoop, and reach freely, • Ability to work both indoors and outside in all-weather and sit/drive for extensive daily travel, • Good hand/eye coordination and sharp eyesight Notice on Use of AI in Hiring As part of our commitment to fair and efficient hiring practices, Cennox uses JazzHR’s TalentFit AI tool to assist in evaluating candidate applications. This technology helps us match applicants to job requirements based on qualifications and experience. All hiring decisions are ultimately made by our human recruiting team. If you have questions or concerns about this process, please let us know during your application. E-Verify Cennox participates in the E-Verify program to confirm the identity and employment eligibility of all new employees. For more information, please visit . Powered by JazzHR qEQ6hLdSII

Sypris Electronics, LLC provides goods and services to the U. Accordingly, Sypris Electronics has a policy of only hiring U.

DOW Technologies is a fast-growing, team-oriented distribution company with a strong, people-first culture.We take pride in creating a professional, organized, and efficient environment where employees are empowered to contribute and grow.We are seeking a reliable and detail-oriented Freight Associa

ANSYS Fluent simulations, Siemens Opcenter MES, GitHub / GitLab) - Design multi-step tasks grounded in your real workflows that require navigating multiple apps, files, and stakeholders in a way that meaningfully challenges frontier AI agents - Collaborate with other electronics-manufacturing expert

Sypris Electronics, LLC provides goods and services to the U. Accordingly, Sypris Electronics has a policy of only hiring U.

Robbins Property Associates, a national multi-family management company, seeks a highly motivated and experienced HVAC Certified Maintenance Technician to join our Team.Position Summary: In this critical role for our residential community, you will maintain all physical aspects of the building as

Core-Mark - - Responsibilities: Receives all inbound merchandise and locate proper pick location; Restocks order pick and flow lines to prepare warehouse for order selection; Ensures placement of product in sufficient quantities to accommodate routine or special demands; Transfers merchandise from

Cardinal Health - - Responsibilities: Receive large boxes on warehouse dock, scan product with RF scanner, and input product information into computer; Break down cases of product and operate heavy equipment to replenish warehouse; Palletize large items to skid and wrap for shipment; Pack small ite