Inspection jobs in Torrance, California - Page 3Create job alerts

Job DescriptionLong Wall Company was created in 2025 to accelerate missile defense technology for the U.S. and our allies. Building on the RS1 and GS0 launch systems, Long Wall develops containerized, mass-producible missile defense systems and offers rapid, low-cost flight testing. We believe that the future of global security and stability require defensive technology that is lower cost, higher performing, better tested, and more broadly distributed than is possible today. Join us. What we look forMission-Driven Problem Solvers. The aerospace frontier demands ingenuity. We want engineers who approach challenges with curiosity, embrace failure as a learning opportunity, and stay focused on delivering the best solution for the mission. Total Ownership. We seek engineers who take full responsibility for delivering flight-ready work while recognizing that no one succeeds alone. The best engineers make their teammates better, knowing that complementary skills create force multiplication and drive mission success. DescriptionWe are looking for an experienced avionics technician (S4 or S5) who is excited about manufacturing development and production hardware for launch vehicles and defense systems. We seek team members who can think critically to improve hardware designs and manufacturing processes, and deliver high quality hardware to our programs. Avionics technicians build and test components and electrical assemblies our launch vehicles and defense systems. Avionics technicians are responsible for a broad range of responsibilities including PCB assembly and rework, electro-mechanical assemblies, sensors/transducers, cable and wire harnessing, final integration, operating thermal chambers, functional testing, and perform software driven tests.Responsibilities: • Assemble PCBs into product chassis and support final vehicle integration by installing electrical sub-assemblies and routing cables and harnesses, • Assemble electro-mechanical components along with the building of circuit boards and small electrical assemblies, • Fabricate high quality, high reliability cable and wire harnesses, • Operate complex automated equipment, including routine inspection, maintenance, and troubleshooting, • Document anomalies and non-conformities and associated rework to quickly return non-conforming product back into normal workflow, • Perform functional testing of built hardware, including setups, instrumentation, test execution, create/upload reports, and teardown, • Ensure lab equipment, tooling and consumables available and maintained to a high standard, • Work closely with manufacturing and test engineers to provide input and develop assembly processes and test procedures, • Assist with the development of production processes for first time production, • Instruct and mentor junior avionics techniciansBasic Minimum Qualifications:, • High School Diploma/GED or Equivalent, • Minimum 5+ years of relevant hands-on technician work experience in aerospace, aviation, military, telecommunications or similar industries. Including demonstrable working knowledge of, but not limited to:, • o PCB, cable harness fabrication, electro-mechanical, mechanical, integration assemblies and prototype developmentPreferred Skills and Other Experience:, • Ability to perform assembly operations including bending, crimping, grasping, pulling, reflowing, sitting, soldering, standing, stooping, stretching, stripping, and torquing, • Proficient usage of a PC; experience with Microsoft Windows, Microsoft Office Suite (Excel, Outlook, Power Point, Word), shop floor management software (ERP) and related programs, • Strong written and verbal communication, and organizational skills, and high level of attention to detail, • Ability to read/interpret and work from controlled technical documentation and processes such as engineering drawings, layout drawings, mechanical drawings, assembly procedures, manufacturing instructions, schematics, and parts lists, • Skills in operating and manipulating automated machinery and various mechanical and electronic hand and power tools requiring manual dexterity with minimal instruction, • Strong emphasis on safety, cleanliness, adherence to corporate policies and standards, a great attitude, and the ability to effectively work with a team, • Ability to rapidly change roles/responsibilities while working in a high-paced, challenging flight production clean room environment, • 1+ years of experience working at a rocket launch facility and supporting launch campaigns, • Associate Degree in electrical discipline., • Manufacture and soldering of electronic components to NASA workmanship standards using IPC-J-STD-001 and/or IPC-A-610 standards, • Manufacture electrical cable and harnesses to IPC-A-620 standard, • Current or past certification for NASA-STD-8739.4, NASA-STD-8739.6, IPC-A-610, IPC-A-620, IPC-J-STD-001 or equivalent, • Knowledge of ANSI S20.20 Electrostatic Discharge (ESD) standard and 5S methodologiesAdditional Requirements:, • Physical effort including carrying, lifting, and pushing moderately heavy materials or equipment (15 to 40 lbs.), • Ability to climb up and down ladders to work at elevated, • Work occasionally performed in an environment requiring exposure to fumes, odors, and noise, • Must be willing to work 50+ hours a week (overtime) including weekends when necessary to support launch and critical project timelines, flexibility required, • Must be willing to travel to other Long Wall sites or customer facilities as necessaryThis is the lowest to highest compensation range we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee’s pay position within the salary range will be based on several factors including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. In addition to base pay and equity, we offer:· Heavily employer-subsidized medical, dental, and vision insurance plans· Long Wall paid life insurance and LTD coverage· 5% 401k match· Student loan repayment assistance program· Paid parental leave· Family planning assistance program· Long Wall paid financial wellness program· Paid time off for non-exempt employees and flexible vacation policy for exempt employeesITAR RequirementThis position requires access to information protected under US export control laws, including the International Traffic in Arms Regulations and/or the Export Administration Regulations. As such, US person status (including US citizens, U.S. permanent residents, individuals granted U.S. asylum status, or individuals admitted in U.S. refugee status) is a required qualification for this position. Equal Opportunity EmployerWe are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, protected veteran status, disability, genetics, or citizenship status (when otherwise legally authorized to work and access export-controlled data) and will not be discriminated against on the basis of such characteristics or any other status protected by the laws or regulations in the locations where we operate. We encourage applicants of all ages.

Job Description Company Overview: NRS is a leading provider of transportation & supply chain solutions. As a family-owned and operated company, NRS has delivered smart logistics solutions to numerous Fortune 500 companies spanning over 70 years. Whether it’s NRT, Keystone, Keystone Fresh, or Keystone Capacity, our innovative energy drives us towards new and valuable solutions for our clients, even as we continuously grow and strengthen our network. We are dedicated to creating a culture that empowers the individual and offers our associates the opportunity to apply their unique skill to the challenges facing our clients. In the office, the warehouse, or on the road, it is this commitment to our innovative spirit that unites us in common mission to push boundaries in the logistics industry. Job Overview: The Director of Fleet Maintenance is a pivotal operations role within our organization, charged with ensuring the safety, reliability, and cost efficiency of our vehicle fleet and equipment. This leadership position oversees the Maintenance department, managing all facets from labor and inventory to compliance and vendor relations. The ideal candidate will bring strategic oversight, operational expertise, and a commitment to excellence in fleet management. Duties and responsibilities: • Oversee the labor hours, daily work and safety of employees engaged in fleet and facility maintenance and repair within budget., • Oversee parts inventory, and consumable supplies within budget., • Oversee work schedules including extra workdays and shifts as needed. Staffs fleet shop properly based on fleet availability., • Oversees the proper selection, purchase and utilization of company assets (tools and equipment) in support of the fleet maintenance department., • Manages processes and repairs with proper departments as necessary., • Develops business relationships to ensure communication and efficient operations with vendors., • Oversees the proper scheduling of fleet maintenance and repairs; along with compliance of all Company programs, including preventative maintenance and inspection of vehicles, non-scheduled maintenance and troubleshooting, repair, rebuild and overhaul of vehicles., • Oversees fleet maintenance functions and various operational and expense reporting., • Implements efficiency ideas, cost reduction measures and assists with the implementation of changes within fleet maintenance., • Conducts audits to ensure all required documentation is accurately completed including all work orders, breakdowns root cause analysis and action plans for prevention, preventive maintenance logs, pre/post trip inspections, certifications and that items are installed correctly with a minimum potential for loss., • Oversees fleet services budget to include past year expenses; adjusts and administers all fleet service purchases and verifies contract adherence between NRS and vendor services to ensure efficient operations., • Stays current with technical manuals, literature and technical advancements of the trade as it pertains to company owned vehicles., • Builds and maintains employee relations through regular department or pre-shift meetings; maintains on-going interaction; keeps communication channels open with employees by answering questions and explaining policies and procedures; monitors employee morale; submits and responds to ideas to improve employee engagement and enablement., • Administers, trains and consistently enforces company policies and procedures., • Lead department safety meetings and coordinates efforts with Safety department to aid in training, conduct employee observations, updating preferred work methods, conducting accident investigations to determine root causes, and routine safety inspections. Makes recommendations for disciplinary action and/or behavior modification where required., • Performs management functions of staff selection, training and development, performance reviews, establishes and holds others accountable to achieve goals, coaching and counseling, discipline and/or terminations., • Ensures compliance with all company and safety rules, policies and procedures. Ensures compliance with local, state and federal regulatory agencies (i.e., OSHA, DOT, BIT and EFC)., • Respond to emergency situations to ensure employee and facility safety, • High school diploma or general education degree (GED), • Tech school or equivalent is preferred, • 7+ years of industry related management experience, • 5+ years of management or supervisory maintenance position; or equivalent combination of education and related experience within comparable size company., • Five years maintenance experience; or equivalent combination of education and related experience required, • 5-7 CMMS experience preferred, • Must possess a valid state driver’s License meeting company standards, • Working knowledge of diesel engines, electrical, hydraulic, pneumatic and braking systems required, • Automotive Service Excellence (ASE Certification preferred not required), • Extensive Standing and Walking: Prolonged periods of standing and walking throughout the facility or around vehicles. NRS is an equal opportunity employer. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. #NRSIND

Job DescriptionLong Wall Company was created in 2025 to accelerate missile defense technology for the U.S. and our allies. Building on the RS1 and GS0 launch systems, Long Wall develops containerized, mass-producible missile defense systems and offers rapid, low-cost flight testing. We believe that the future of global security and stability require defensive technology that is lower cost, higher performing, better tested, and more broadly distributed than is possible today. Join us. What we look forMission-Driven Problem Solvers. The aerospace frontier demands ingenuity. We want engineers who approach challenges with curiosity, embrace failure as a learning opportunity, and stay focused on delivering the best solution for the mission. Total Ownership. We seek engineers who take full responsibility for delivering flight-ready work while recognizing that no one succeeds alone. The best engineers make their teammates better, knowing that complementary skills create force multiplication and drive mission success. DescriptionWe are looking for an experienced CNC programmer and machinist who is excited about manufacturing development and production parts for launch vehicles and defense systems. We seek team members who can think critically when programming and machining to improve hardware designs and manufacturing processes. This role will require specific skill sets with multi-axis Mill programming and machining. Programming will be completed using Mastercam and verified using Vericut. Parts to be machined on Haas Machining Centers. Must have the ability and eagerness to both program and machine components. This role will primarily focus on 5th Axis Milling work supporting both production and development hardware for various components specifically launch vehicle engine and space system hardware. In an S5 level role – you will be expected to take projects to completion with a high level of autonomy, mentor junior machinists and drive shop and process improvementsWe machine parts from both billet material and additively manufactured parts:· Aluminum· Steel· Stainless Steel· InconelTypes of Machines:· Haas UMC 750 & UMC 1000· Haas VM3· Haas Gantry MillResponsibilities: • Use Mastercam to create new programs and review/edit existing CNC programs for production and development hardware, • As required, use Vericut to validate programs and maintain revision control on CNC programs, • Analyze piece parts for DFM to ensure that the parts are optimized for manufacturing and collaborate with engineering to recommend drawing changes as needed, • Take feedback from engineering and manufacturing teams to rapidly iterate on part processes and designs, • Set-up, prove out, and operate programs on 3 & 5-axis mills. Perform in-process and first article inspections, • Support and mentor junior programmers and machinists, • Work with support teams to ensure machine care and preventative maintenance activities are completed, • Design and machine custom tooling and fixturing, • Take an active role driving machine shop process improvements, ensuring shop cleanliness and organization is maintained to a high standard, • Submit purchase orders for tooling per job requirements and add tools to vendor managed inventory (VMI) list for standard components, • Support with material loading and handlingBasic Qualifications:, • High School Diploma/GED or Equivalent, • Minimum 10+ years of CNC Mill programming and machining experience; including demonstratable expert working knowledge of Mastercam, superalloy machining, Haas CNC Machines and Controls- OR -, • Minimum 6+ years of CNC Mill programming and machining experience AND, • Certification and/or provable expert working knowledge of Mastercam, • Certification and/or provable expert working knowledge of Haas CNC Machines and Haas Controls, • Expert in superalloy machining, • Availability to work a standard 10-hour shift schedule (50-hrs per week, overtime included)., • Occasional weekends to support critical deadlines.Preferred Skills and Experience:, • Experience in interpreting GD&T and providing feedback to engineers in best practice for ease of machining and inspection.., • Ability to read/interpret and work from controlled technical documentation and processes such as engineering drawings, layout drawings, mechanical drawings, assembly procedures, manufacturing instructions, schematics, and parts lists, • Proficient usage of a PC; experience with Microsoft Windows, Microsoft Office Suite (Excel, Outlook, Power Point, Word), shop floor management software (ERP) and related programs, • Strong written and verbal communication skills, excellent concentration with outstanding work efficiency and accuracy, great organizational skills, and a meticulous attention to detail, • Experience in aerospace, medical or automotive manufacturing., • Strong knowledge of inspection tools and inspection processes, • Experience with Mastercam Blade Expert and impeller machining., • Hands on experience with metal 3D printed components., • Experience with Vericut verification software, • Experience with Microsoft Office products, • Familiarity with ISO9001 and AS9100DAdditional Requirements:, • Ability to sit, stand, squat, and walk for extended periods of time., • Ability to occasionally ascend/descend on ladders and/or work on rooftops., • Ability lift 25lbs repeatedly and often throughout the day., • Ability to communicate with individuals and groups in person, by phone and telepresence., • Can work in Indoor manufacturing environment 70%, outdoors 30%, • Travel between our El Segundo (90%) and Port of Long Beach (10%) facilities as required. Occasional travel to our other instate and out-of-state sites may be required.This is the lowest to highest compensation range we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee’s pay position within the salary range will be based on several factors including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. In addition to base pay and equity, we offer:· Heavily employer-subsidized medical, dental, and vision insurance plans· Long Wall paid life insurance and LTD coverage· 5% 401k match· Student loan repayment assistance program· Paid parental leave· Family planning assistance program· Long Wall paid financial wellness programPaid time off for non-exempt employees and flexible vacation policy for exempt employeITAR RequirementThis position requires access to information protected under US export control laws, including the International Traffic in Arms Regulations and/or the Export Administration Regulations. As such, US person status (including US citizens, U.S. permanent residents, individuals granted U.S. asylum status, or individuals admitted in U.S. refugee status) is a required qualification for this position. Equal Opportunity EmployerWe are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, protected veteran status, disability, genetics, or citizenship status (when otherwise legally authorized to work and access export-controlled data) and will not be discriminated against on the basis of such characteristics or any other status protected by the laws or regulations in the locations where we operate. We encourage applicants of all ages.

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Schedule This is a 3 - 4 x 11 rotating shift working alternating Wednesdays. Shifts Available • Sun - Wed 1st shift (5am - 4:30pm), • Sun - Wed 2nd shift (4pm - 3:30am), • Wed - Sat 1st shift (5am - 4:30pm) The Role • Conduct receiving, in-process, and final inspections to ensure conformance to the requirements., • Perform inspections utilizing engineering drawings, standard procedures, calibrated manual gages/tools, and various inspection methods., • Record and maintain accurate data including inspection results, non-conformance reports (NCRs), and other quality documentation., • Collaborate with cross-functional teams to resolve quality issues and implement corrective/preventive actions., • Create and maintain inspection files, interpret results, and produce complete, accurate inspection reports., • Assist Leadership with other various inspections and inspection-related tasks., • Keep the Metrology Lab clean, organized, and safe following 5S principles., • Use metrology Scanners, such FARO, Romer, Creaform C‑Track, MetraSCAN, GOM ScanBox, to acquire geometrical scan data., • Process raw scan data, remove noise, and export files using comprehensive 3D metrology software such as PolyWorks & Zeiss. Basic Qualifications • Ability to lawfully access information and technology that is subject to US export controls, • At minimum 1 to 2 year of experience in a Quality inspector role in an aerospace, automotive, or other relevant production environment, • High‑school diploma (required)., • Proficient computer literacy (Windows, Teams, Excel, etc.)., • Ability to read and understand engineering drawings, including knowledge of GD&T, • Ability to lift parts up to 50 lb and operate scanning arms for extended periods., • Strong verbal and written communication skills., • Team‑oriented mindset with high attention to detail., • Ability to analyze and solve complex problemsPreferred Qualifications, • Associate or higher degree in a technical field or equivalent work experience, • Background interfacing with Quality, Engineering, and Production teams, • Experience in regulated or high-performance manufacturing environmentsWork Environment, • Occasionally exposure to noise, machinery, welding, machining, hot surfaces, and airborne particles., • Requires frequent standing, walking, bending, reaching, and handling of precision tools and materials., • Must lift up to 40 lbs. independently and 50 lbs. with assistance., • May involve crouching, climbing, confined spaces, or work at heights., • PPE (including but not limited to safety glasses, hearing protection, gloves, respirators as needed) and company uniform are required., • TCH 02: $23.00 - $32.00/hour, • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job DescriptionCNC Programmer / Manufacturing Lead Reports to Operations Manager Salary: DOE, $40-60/hr We are seeking an experienced, detail-oriented CNC Programmer to join our Manufacturing team of our aerospace and defense manufacturing facility. This hybrid role emphasizes the CNC programming background, but is an opportunity for an individual to build their career as a high-value Manufacturing Supervisor. This role is critical to the front-end acceptance of client requests and planning/implementation of machined part production, from quoting and router development to CNC programming and first article execution. Ideal candidates will bring experience in both precision CNC Programming and Design For Manufacturability principles, in launching new parts into production efficiently and compliantly. Proficiency in programming 4-5 Axis CNC machines is critical. Opportunity A&R is a contract manufacturer experiencing strong demand growth which we expect to continue for several years. This position offers an awesome opportunity for career development and progressive earning power. Key Responsibilities: CNC Programming & Setup • Working largely with new customer requests, program CNC mill and lathe operations using Mastercam (or Fusion 360), based on customer blueprints and 3D models., • Perform first article setups, dry runs, and edits to validate program accuracy and efficiency., • Conduct in-process inspections to verify dimensions during first article production runs., • Capable of training machine operators on setup sheets, fixturing, and safe operation of new programs., • As Necessary, assist in movement of materials through impacted work centers to ensure customer schedules are met, troubleshoot and address bottlenecked processes/operations., • Maintain revision control for CNC programs and tooling instructions.Manufacturing Lead, • Analyze customer blueprints, 3D models, and specifications to determine manufacturability and generate time/material estimates for quoting., • Develop/Update manufacturing router sequences, Bill of Materials, and Work Centers for new and existing product lines, determining estimated setup and cycle times to maintain an accurate ERP system., • Select tooling, fixturing, and machine allocation based on material and part geometry for the fabrication of machined parts using 2 to 5 axis lathes; 3 and 4 axis horizontal and vertical mills; as well as 5 axis mills and conventional machining equipment, • Collaborate with Customer, Production and Quality teams to ensure DFM (Design for Manufacturability) ensures the most efficient manufacturing methods and techniques. AS9100 compliance., • Organize the machine shop, priorities and workflow to meet customer requirements.Required Qualifications:, • 7+ years of experience in aerospace CNC machining, with demonstrated expertise in CNC programming and setup., • Strong proficiency with Mastercam, or Fusion 360., • Deep understanding of G-code, GD&T, blueprint reading, and aerospace tolerancing., • Experience working in AS9100/AS9102-regulated environments., • Proven ability to estimate machining time, material requirements, and tooling needs for quoting purposes., • Familiarity with various aerospace alloys (e.g., titanium, Inconel, stainless steel, aluminum)., • This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e., 'Green Card Holder'), Political Asylee, or Refugee.Preferred Qualifications:, • Experience in a “Make-to-Blueprint” job shop environment., • Experience and Understanding of Master Routers (i.e. “Item Masters, which require a Bill of Materials and Routing sequences for CNC operations) and/or the willingness/ability to learn., • Working knowledge of MRP/ERP systems (specifically Syteline, or JobBOSS, Epicor, ProShop)., • First article inspection (FAI) process experience per AS9102., • Lean or Six Sigma training is a plus.Key Competencies:, • Strong mechanical aptitude and machining knowledge, • Ownership mindset and initiative in problem-solving, • Ability to work cross-functionally with quality, operations, and sales teams, • Attention to detail in both planning and execution, • Clear, concise technical communication skills (verbal and written)Why Join Us:, • Be a strategic part of launching mission-critical aerospace components, • Hands-on environment with autonomy and impact, • Competitive compensation and benefits package (We Reward Talent), • Fast-paced, growth-oriented company with a strong industry reputation uWG6R0RcKY

Job Description We are seeking a skilled and detail-oriented Composite Bonding Technician to join our manufacturing team. In this role, you will be responsible for interpreting technical specifications and using your expertise in composite materials to fabricate, bond, and repair high-quality products. The ideal candidate is a hands-on professional with a strong background in composite layup, bonding processes, and operating specialized equipment within a production environment. Key Responsibilities: • Blueprint Interpretation: Read and interpret engineering blueprints, drawings, and specifications to determine job requirements., • Fabrication & Layup: Lay out articles, cut parts and materials to size, and prepare surfaces for bonding., • Material Application: Apply liquid or solid bonding agents with precision, demonstrating a strong understanding of ply orientations., • Vacuum Bagging: Perform vacuum bagging processes to prepare parts for curing., • Equipment Operation: Set up and operate autoclaves, hydraulic presses, and ovens to complete the bonding cycle., • Process Control: Monitor and control conditions of heat, pressure, and timing according to material and bonding agent specifications., • Finishing: Sand, burr, and smooth over bonded areas; apply sealing resins to cut or exposed edges., • Quality Assurance: Monitor and verify the quality of the finished product throughout the process., • Repairs: Complete repairs on composite, metal, or laminate bonded products by following inspection and rework instructions. Basic Qualifications: • High School diploma or GED., • Minimum of 4 years of relatable composite fabrication or bonding experience in a manufacturing/production environment., • Work Environment: Ability to access small, confined spaces and work in an enclosed environment. Preferred Qualifications: • Experience working with high-temperature composite materials, specifically BMI (Bismaleimide) and Polyimide., • Hands-on experience with structural subassemblies, including bonding, co-bonding, core bonding, and advanced bagging techniques.

Job Description Busy Aerospace Machine Shop looking for CNC O.D. Grinding SET-UP/OPERATOR to run Studer equipment. Must be reliable, detail oriented. Must be able to work independently including programming using Studer Picto-Gramming on a Fanuc control, set-up, select wheels, speeds and feeds. Must have familiarity with use of basic inspection tools such as micrometers, comparators, lapping machines, concentricity gages. Flexible schedules, overtime, incentives, and competitive compensation package. Salary DOE Company DescriptionGrowing Aerospace Machine Shop. Boeing Silver Rated Supplier. Flexible Schedules, Medical Insurance, 401k, FSA, incentive bonuses and overtime.Growing Aerospace Machine Shop. Boeing Silver Rated Supplier. Flexible Schedules, Medical Insurance, 401k, FSA, incentive bonuses and overtime.

Job Description • MUST HAVE EXPERIENCE TO APPLY - TEMP TO PERM POSITION Our client is seeking for a Machine Operator - Punch Press at a payrate $19-22/hr. Position: Temp to Perm! RATE: $19 - $22 / hour (depends on experience) Hours: 7:00 am - 3:30 pm (Monday - Friday) Summary The Machine Operator - Press is an essential member of our Client. This position is responsible for operating punch presses, overhead, rotary presses and verifying product quality. The related responsibilities may include but are not limited to: JOB RESPONSIBILITIES: • Before setting up job pull the ‘green’ inventory tag from the material. Ensure material part number matches work sheet / traveler and the material shelf life will meet the order requirement., • Contact supervisor immediately if material does not meet shelf-life requirements., • When setting up to run an order through one of the presses review the Work Sheet / Traveler, inspection report, dimensional requirements, packaging, and handling requirements., • Set up and adjust the equipment to ensure that product meets all quality requirements and specifications., • Check die(s) to ensure that it matches the Work Sheet / Traveler. Report wrong or damaged dies to supervisor immediately., • Perform all in-process inspection as specified on the Work Sheet / Traveler, and/or inspection report., • Notify supervision of any quality / process or equipment issues immediately, • On all new jobs, verify the time requirements for the respective process (standard vs. actual). If requirements cannot be met, notify supervision immediately., • Adhere to all safety requirements to ensure safe operation of equipment, processes, and related employee safety requirements are met. Other Duties: • Maintain good 5S (workplace organization) on machines and around work area., • Maintain machine preventive maintenance as called out by machine manual and / or log., • Perform other duties as assigned by management. Education Requirements: This position should have adequate education, experience, training, or a combination thereof to ensure that they are competent in executing this function. Senior management shall determine that the candidates and personnel have the proper credentials and skills necessary to successfully fulfill the responsibilities. Required Skills: This position requires basic computer skills necessary to process and communicate requirements. These may include but are not limited to: Microsoft Office, house data systems, needed to execute this function. Qualified applicants with arrest or conviction records will be considered for employment in accordance with the law. Including the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance. APPLY: Impacting people. One job at a time. Express Employment Professionals Torrance is your local resource for your employment search. We offer a variety of positions including Industrial, Manufacturing, Clerical and Administrative. Our positions vary from temporary, long

Job Description Conduct NDT (Non-Destructive Testing) using Fluorescent Liquid Penetrant Inspection specific techniques on aerospace products. Understand products, equipment set-up and operate. Follow specific operating procedures. Use safety specifications. Interpret and evaluate test results.Currently certified to NDT Level II in Fluorescent Penetrant inspection in accordance with NAS-410.Two years manufacturing experience in non-destructive testing (Fluorescent Penetrant Inspection Testing Method). • Must have documented hours for Training, & Experience per NAS-410 Fluorescent Penetrant Testing Level II, • Minimum 32 Hrs classroom training, • Minimum 400 Hrs experience NDE Level II certification in line with ASNT TC-1A/NAS-410 guidance in Radiography (RT) -Radiation safety training/certification with IRRSP X-ray card -3+ months of experience performing digital radiography -Computed or direct digital certification -Operational experience of utilizing digital radiography systems RESPONSIBILITIES: -Perform volumetric NDE inspections with advanced radiographic techniques: traditional analogue, computed and direct digital -Perform near surface NDE inspections with fluorescent penetrant and visual inspection methods -Interpret, evaluate, communicate and report findings to production and engineering -Interpret and review engineering drawings as required -Optimize and manipulate digital images for maximum clarity and accuracy -Support the development of NDE inspection techniques for complex geometries -Assist in training and developing others within the team -Support research and development of system qualification and certification for critical processes BASIC QUALIFICATIONS: -HS diploma or GED equivalent -2+ years of experience as a Level II non-destructive evaluation/testing inspector -NDE Level II certification in line with ASNT TC-1A/NAS-410 guidance in Radiography (RT) -Radiation safety training/certification with IRRSP X-ray card -3+ months of experience performing digital radiography -Computed or direct digital certification -Operational experience of utilizing digital radiography systems PREFERRED SKILLS AND EXPERIENCE: -NDE Level II certification in line with ASNT-TC-1A guidance in fluorescent penetrant (PT) and visual inspection (VT) -Certified weld inspector status (CWI) -Basic computer skills and familiarity with Microsoft applications including Word, PowerPoint, Excel, etc. -Knowledge of carestream -Experience operating computed panels and scanners -Experience inspecting advanced materials such as high strength aluminum alloys, precipitation hardened steels, inconel and titanium -Knowledge of AMS, AWS/ASME, ASTM, etc. -Basic understanding of lean principles: 5s, Kaizen, continuous improvement initiatives ADDITIONAL REQUIREMENTS: -Ability to lift 25 lbs unassisted, bend, stretch, stand for extended periods of time, climb stairs, reach, twist, sit, and walk -Willingness to work overtime, and on weekends if needed Company DescriptionAerospace Manufacturing Company that builds Tube and Duct Assemblies for Airplanes, Missiles and SatellitesAerospace Manufacturing Company that builds Tube and Duct Assemblies for Airplanes, Missiles and Satellites

Job Description JOB SUMMARY: Plan, direct and coordinate manufacturing engineering projects in a build-to-order production environment. Interface with customers, other engineers and shop floor personnel to determine most effective manufacturing methods. ESSENTIAL FUNCTIONS: • Design and develop processes/procedures in a job-shop environment including:, • Tooling requirements for formed, machined and welded metal components including fixtures for welding, machining, assembly and inspection., • Develop, analyze and improve Bills-Of-Material (BOM’s) manufacturing planning and work instructions, • Interface with customers on part requirements and specifications, • Provide job estimates for customer request-for-quotes (RFQ’s), • Analyze and plan work force utilization and work flow for maximum efficiency, • Work with planning and design staff to ensure efficient production methods, • Estimate production times, staffing requirements and related costs Company DescriptionSince 1949 ACE Clearwater Enterprises has been building complex formed and welded assemblies for the aerospace and power generation industries. We say that "If it flies, we have parts on it". Operating from three facilities within a 10 sq. mile radius in Southern California, our employees are the best problem solving team in the business. ACE is the place for Engineering, Forming, Bending, Welding, Machining , Waterjet and Assembly. We have over 400,000 square feet of pure manufacturing agility and people with the experience to make it happen. 1949 ACE Clearwater Enterprises has been building complex formed and welded assemblies for the aerospace and power generation industries. We say that "If it flies, we have parts on it". Operating from three facilities within a 10 sq. mile radius in Southern California, our employees are the best problem solving team in the business. ACE is the place for Engineering, Forming, Bending, Welding, Machining , Waterjet and Assembly. We have over 400,000 square feet of pure manufacturing agility and people with the experience to make it happen.\r\n

Job Description Job Summary: The Supplier Quality Assurance Engineer (SQE) works closely with Engineering and Operations/Production and suppliers to devise and implement methods and procedures for inspecting, testing and evaluating the precision and accuracy of products and production equipment. Recommends and supports the implementation of manufacturing process improvements and provides inputs and support for vendor evaluations. Essential Functions • Work with Engineering and Operations to ensure the final product meets product design requirements and support the development of new products as supplier Liaison., • Develop, implement, and improve methods and procedures for inspecting, testing, and evaluating production and Engineering components and Contract Manufacturing activities., • Manage and communicate technical product changes to Operations including ECO, waivers, deviations, substitutions to Suppliers., • Drive Lean and Six Sigma process and methodologies with Contract Manufacturing providers., • Manage and drive closure of external customer complaints and corrective actions (CA) with Contract Manufacturing provider., • Document existing and new quality assurance processes, assist with internal training and annual re-certification for IPC/ J-Std requirements., • Initiate and sustain MRB (Material Review Board) process in support of appropriate product disposition., • Assist with internal auditing and support ISO 9001., • Manage and monitor supplier/ contract manufacturing program. Conduct supplier approvals, surveys, and audits. Provide source inspection activities, issue and verify supplier’s corrective actions and other supplier improvement activities., • Compile quality reports by collecting, analyzing and summarizing information and trends including failed processes, in-process rejections and warranty returns., • Review non-conforming material reports for trending, and corrective action solutions including supplier evaluations., • Perform quality engineering reviews of customer and vendor issues., • Certified Quality Engineer preferred., • Minimum of 5 years of experience working in supplier support processes or Supplier engineering role within electronic manufacturing environment., • Supplier support experience within ISO 9001 or AS9100 certified organization desired., • Six Sigma and/or Lean experience/certification preferred., • Good communication skills and attention to detail are needed., • Ability to read, analyze, and interpret common industry related journals and legal documents. Ability to respond to inquiries from customers, regulatory agencies, etc., • Experience with the quality of design and manufacture of RF systems is preferred., • Excellent technical writing, communication, and organizational skills required, experience with MS Office products required, experience with a statistical software package is a plus.

Job Description Position Summary: Sonic Industries, Inc. is a leading aerospace fastener company. RBC Bearings is a premier global supplier of custom engineered, precision products to the aerospace and defense industries. RBC Sonic have an immediate opening for a Quality Engineer. The Quality Engineer utilizes a wide range of knowledge and skills to participate in Quality Engineering and Continuous Improvement projects and programs. The Quality Engineers are the point of contact for all interfacing of Quality Assurance issues with the respective internal customers. Support for technical and programmatic issues with Inspection (QC). Key Position Responsibilities: The duties and responsibilities include, but are not limited to, the following and must be performed with limited supervision. • Prepares inspection procedures and determines appropriate inspection points., • Reviews work orders and complete instructions specifying inspections to be performed., • Performs Preliminary Reviews of Non-conformance Inspection Reports and evaluates in-process rejections IAW QA Process Procedures for Non-conforming Material and MRB Activity., • Performs Contract Reviews., • Generates Customer MRB Tags and submits to respective Program Customer Interface., • Has control of respective program non-conforming parts and material in and out of MRB Bond Room., • Maintains Metrics and prepares reports for management on quality trends, • Leads interdisciplinary teams to address quality problems., • Assumes primary responsibility for managing moderate size projects., • Responsible for executing projects in conformance with established policies, practices, and procedures; may develop new practices and procedures when necessary., • Responsible for preparation and submittal interface with Customer MRB Reject Tags., • Works independently and uses professional judgment and with limited need for supervision. The successful candidate for this job must have educational training and working experience in Quality Assurance or performed at a Quality Engineer working level in a DOD, FAA, Aerospace, Product Manufacturing or Design to Prototype business. • Knowledge and experienced in the Quality Assurance disciplines., • Knowledge and experience with drawing interpretation and inspection activities, manufacturing processes and evaluation of problem-solving techniques., • Knowledge of aerospace specifications., • Knowledge of complete manufacturing processes related to product or functional area., • Must be computer literate in MS Office, Software utilities and application programs., • Must have experience interfacing with external customers., • Ability to communicate effectively, in writing and verbally., • Ability to work in a “TEAM” teaming environment., • Ability to plan, organize, and coordinate all activities necessary for effective project execution by other project participants, vendors, and sub-contractors., • Ability to coordinate activities with multiple groups., • Ability to analyze and interpret incomplete information; adapts problem-solving approach to variable situations; determines project direction through evaluation of diverse information., • Bachelor’s degree in related field, Business or Technical., • Preferred mechanical hardware experience, use of gauges, micrometers, and calipers., • Master’s degree in a related field., • Knowledge of mechanical engineering, e.g., reliability; maintainability; producibility; cost analysis; requirements analysis and flow down, etc., • Knowledge of division products and advanced knowledge of functional or technical area (and all associated processes and documentation). Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident) or a Foreign Person for whom a license is obtained. Quality Requirement: Employees will participate as required in understanding, implementing and maintaining the Company Quality Policy in accordance with AS-9100C and/or ISO-9001:2008 requirements. Physical Requirements/Working Conditions: This is primarily a sedentary office position with employees working in a controlled office environment. The incumbent answers telephone calls and occasionally bends, reaches, and pushes and pulls file drawers to file records and reports. Employee moves throughout the building to collect, deliver, and copy documents. The position uses a computer terminal to access, input, and retrieve data. Finger dexterity may be required to operate typewriter, computer keyboard and calculator. Employer’s Statement: This job description does not list all of the duties of the job. You may be asked by supervisors or managers to perform other duties. You will be evaluated in part based upon your performance of the tasks listed in this job description. The company reserves the right to change, rescind, add or delete the duties and responsibilities of positions within this job classification at any time. The job description is not a contract for employment, and either you or the employer may terminate employment at any time, for any reason. We offer competitive compensation and excellent benefits including Medical, Dental, and a company matched 401k plan. RBC Bearings / Sonic Industries, Inc. Sonic is an Equal Opportunity Employer m/f/d/v Job Type: Full-time Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee discount, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Parental leave, • Torrance, CA 90502 (Preferred)

Job Description Senior QA/QC Inspector - GD&T - Sheet Metal Manufacturing World class supplier of precision sheet metal assembly and fabrication, serving the Electronics, Telecommunications, Medical, Commercial, Defense, and Aerospace industries. We are looking for an experienced, focused QA/QC Inspector who will cover day-to-day quality tasks and assist with in-process inspections. DUTIES AND RESPONSIBILITIES: Includes the following: * Monitoring, measuring and testing products (in-process and final inspection) using advanced inspection techniques with the use of height gauge, gauge pins, thread gauges, comparator etc. * Complete inspection reports and documentation in accordance to Customer specifications. * Identify and verify material and specification requirements related to product as well as identify unique requirements that may be flowed down through purchase order text * Assist in providing leadership and training to the QC department requirements as well as assuring compliance to the Quality Management System (QMS). * Calibrating Inspection Equipment and creating records in Simpletrak. * Other duties as assigned QUALIFICATIONS: * Must be able to read and interpret schematics, blueprints, specifications, etc. per ASME Y 14.5 * Experience performing First Article Inspections Reports (FAIRs) * Knowledge of ISO9001 or AS9100 * High School Diploma or equivalent experience. * Overall leadership and organizational skills. * 3+ years' experience or equivalent training as an inspector in a metal fabrication environment. * Knowledge of CMM devices and laser scanners as well as other modern inspection equipment. Experience using PC-DMIS is a plus. * Must be a U.S. citizen or permanent resident per government (ITAR) regulations for this position. * Bilingual English/Spanish is a plus. * Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. PHYSICAL DEMANDS AND WORK ENVIRONMENT This is a manufacturing environment where sitting, standing, walking, crouching, bending and lifting are required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential function * While performing the duties of this job, the employee is frequently required to sit, stand, walk, crouch, bend and lift. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ramda Metal Specialties, Inc. is an Equal Opportunity Employer Powered by JazzHR m7FePmlJec

Job DescriptionHadrian – Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We recently raised $260 million dollar Series C to accelerate this mission. We are excited to be launching a new Factory in Mesa, Arizona, a 270,000 square foot facility that will create 350 new jobs immediately. We are opening a new headquarters to support thousands of future hires, launching Hadrian Maritime to serve naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian works with startups, Tier 1 and Tier 2 suppliers, and major defense contractors across space, shipbuilding, and aviation to scale production, reduce costs, and accelerate delivery on mission-critical programs. We are backed by leading investors including Lux Capital, Founders Fund, and Andreessen Horowitz. Our fast-growing team is united by a shared mission to reindustrialize American manufacturing for the 21st century and beyond! The Role The CMM Programmer (PC-DMIS) will play a critical role in advancing Hadrian’s automated inspection capabilities. You will program and optimize PC-DMIS routines for highly complex prismatic parts for the aerospace and defense industries, ensuring precision and reliability in our New Product Integration (NPI) and production workflows. Unlike traditional shops, the programs you create will run on fully automated CMM cells designed to operate lights-out. This means your work must incorporate robust programming practices and controls to ensure reliability. You’ll also collaborate with our software automation teams, who have engineer layered controls to safeguard and standardize the programming approach. This is a unique opportunity to work at the frontier of CMM automation and help shape the future of metrology in aerospace manufacturing What You'll Do * Create and optimize PC-DMIS programs for New Product Integration (NPI) work orders * Interpret and apply GD&T requirements from engineering drawings; identify and resolve discrepancies * Collaborate with cross-functional teams (CMM technicians, Quality, Manufacturing Engineering, CAM programmers) to drive inspection excellence * Design fixtures to support automated inspection * Troubleshoot PC-DMIS programs and improve Hadrian’s internal specifications * Support prove-outs of highly complex geometries with custom probes and setups * Partner with software teams to identify and implement process improvements What We’re Looking For * High school diploma or equivalent * 2+ years of experience as a PC-DMIS programmer * 2+ years of experience interpreting engineering drawings * Experience working in a machine shop with knowledge of metrology for subtractive manufacturing processes What Will Set You Apart * PC-DMIS training (101, 201, or beyond) * Strong understanding of GD&T, datum structures, and tolerances (form, orientation, location, profile, runout) * CAD software experience (NX preferred) * Background as a machinist or exposure to 5-axis machining environments * PC-DMIS API / VB scripting expertise * Familiarity with automated inspection processes and integration of customer specifications Compensation For this role, the target salary range is $83,000- $189,000 (actual range may vary based on experience). This is the lowest to highest salary we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. Benefits * Medical, dental, vision, and life insurance plans for employees * 401k * Relocation stipend if you’re moving from outside of LA * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR [here ](). Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Purpose The Metrology Programmer creates, maintains, and optimizes inspection programs and templates across PC-DMIS, ZEISS Inspect, and PolyWorks for CMMs, portable arms, and GOM/ATOS optical systems. This role not only builds robust, efficient programs but also performs hands-on inspections, operates advanced metrology equipment, and supports technicians with reporting and data validation as needed. Acting as both a technical anchor and a collaborative guide, the Metrology Programmer ensures inspection accuracy, drives standardization, manages programming priorities, and elevates team capability. Through deep expertise, disciplined execution, and a steady presence on the floor, this role enables precise, compliant measurement results that uphold engineering requirements and strengthen production quality. The Role • Develop, edit, and maintain metrology programs/templates across CMMs, portable arms, and optical systems to drive consistency and efficiency., • Perform dimensional inspections using CMMs, portable arms, GOM/ATOS, and conventional tools to verify parts against CAD and engineering requirements., • Interpret and apply engineering documentation, including 2D drawings, 3D models, GD&T, and related specifications., • Support and prepare First Article Inspection Reports (FAIRs) in accordance with internal and industry standards., • Review and validate supplier and subcontractor FAIRs and production inspection records when required., • Collaborate with cross-functional teams to meet quality, throughput, and delivery targets., • Guide and mentor technicians on program execution, workflow standards, and proper equipment use/maintenance., • Clearly communicate non-conformances and inspection results to Manufacturing, Engineering, and leadership., • Maintain and improve standard program libraries, templates, and best practices to elevate metrology capability., • Perform additional duties assigned to support overall quality objectives and cross-functional alignment. Basic Qualifications, • Ability to lawfully access information and technology that is subject to US export controls, • Well demonstrated experience with 2D and 3D inspections using a CMM, preferably utilizing PCDMS, Hexagon and GOM-ATOS inspection software applications, • Working knowledge of inspection and documentation procedures, • Ability to interpret GD&T and engineering drawing, • Strong attention to detail and ability to work independently in a fast-paced environment., • Aerospace manufacturing experience, • Ability to work effectively with diverse team members, • Excellent communication and interpersonal skills., • Ability to multi-task and streamline day-to-day operations. Preferred Qualifications, • Machining Shop experience, • Bachelor's degree in mechanical engineering, Manufacturing Engineering, or related technical field. Work Environment, • This role is based in a dynamic manufacturing setting and may require standing and handling precision equipment for extended periods of time., • Must be able to lift at least 25 lbs., • Company Uniform must be worn while working., • Specialist / S04: $46.00 - $63.00, • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job DescriptionDRIVER CLASS AJob Summary: This position requires the ability to drive a truck with a capacity of at least 26,001 pounds Gross Vehicle Weight Rating (GVWR). May load and unload vehicle as required. Requires commercial drivers’ license. Supervisory Responsibilities: • None.Primary Duties/ Responsibilities:, • Greets customers with respect and courtesy., • Keeps up to date with the product inventory and its functionality., • Should ask questions and provide relevant information to the customers that they might need and then list down the orders which the customers might purchase, thereby providing them excellent customer service., • Inspect vehicle to ensure that mechanical, safety, and emergency equipment is in good working order, including the completion of pre-trip and post-trip inspections., • Follow appropriate safety procedures for transporting goods including the inspection of loads to ensure that cargo is secure., • Secure cargo for transport, using ropes, blocks, chain, binders, or covers., • Read and interpret maps to determine vehicle routes., • Maneuver trucks into loading or unloading positions, following signals from loading crew and checking that vehicle and loading equipment are properly positioned., • Report vehicle defects, accidents, traffic violations, or damage to the vehicle., • Obtain receipts or signatures for delivered goods and collect payment for services when required., • Check all load-related documentation for completeness and accuracy., • Collect delivery instructions from appropriate sources, verifying instructions and routes., • Operate equipment, such as truck cab computer, cellular phones, driver cameras, GPS equipment to exchange necessary information with bases, supervisor or other drivers., • Load or unload trucks or help other with loading or unloading, using loading-related equipment or other equipment as necessary., • Maintain proficiency in all organizational safe working policies and practices., • Performs other driver related duties as assigned., • Adheres to company policies and work requirements. Required Skills/Abilities:, • The ability to read, write, understand, and relay, written and verbal instructions., • Ability to operate available equipment, such as calculators, or scanners., • Basic mathematical skills, as needed to make change and give refunds., • Knowledgeable about company’s products and services, and customer-related policies., • Must have a class “A” commercial driver’s license and required endorsements for the position. Education and Experience:, • High school diploma or equivalent., • Successful completion of on-the-job training., • Two years of related experience preferred. Physical Requirements:, • Must be in adequate physical condition to perform requirements such as mental, physical and manual dexterity, hand/grip strength, depth perception and any other physical attributes that enable the employee to perform the job safely according to all Company, Local, State, and Federal regulations and requirements., • Ability to lift/carry up to 75 pounds regularly., • Ability to push/pull up to 75 pounds regularly., • Must wear prescribed personal protective equipment when handling material or operating equipment. Other Requirements:, • Successfully pass a DOT drug test as requested, a DOT physical capacity assessment, a background and motor vehicle check., • Must maintain a valid commercial driver’s license and driving record that meets the organization safe driving standards. This job description is not an exhaustive list of all functions that the employee may be required to perform, and the employee may be required to perform additional functions. Additionally, Ganahl Lumber Company reserves the right to revise the job description at any time. All active employees must be able to satisfactorily perform the essential functions of the position and that, if requested, reasonable accommodations may be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. Your employment with Ganahl Lumber Company is at will. Nothing in this job description shall be interpreted to be in conflict with or to eliminate or modify in any way, the at-will employment status of the Ganahl Lumber Company employees. Powered by JazzHR AmyEyDqJ2J

Job DescriptionFull-time Manufacturing Quality Inspector About Us Our company is a leading manufacturer of precision medical devices, committed to delivering high-quality products that meet and exceed industry standards. We are seeking a detail-oriented and experienced Manufacturing Quality Inspector to join our team and help maintain our reputation for excellence. Job Overview As a Manufacturing Quality Inspector, you will play a crucial role in ensuring that our products meet the highest quality standards and comply with relevant regulations. You will be responsible for inspecting materials, components, and finished products throughout the manufacturing process, identifying defects, and implementing quality control measures. Key Responsibilities • Conduct thorough inspections of raw materials, in-process components, and finished products to ensure compliance with specifications, quality standards, and regulatory requirements, • Utilize precision measuring instruments, including calipers, micrometers, and gauges, to perform accurate measurements and dimensional checks, • Verify product conformance to ISO 13485 and FDA regulations, • Document inspection results, maintain detailed records, and prepare quality reports, • Identify and report quality issues, non-conformances, and deviations from established procedures, • Collaborate with production teams to implement corrective and preventive actions, • Participate in root cause analysis and continuous improvement initiatives, • Assist in the development and revision of quality control procedures and work instructions, • Calibrate and maintain quality inspection equipment, • Perform audits of manufacturing processes and quality systems, • Train and mentor junior quality inspectors and production personnel on quality standards and inspection techniques, • Stay updated on industry trends, regulatory changes, and best practices in quality control Qualifications and Requirements • Bachelor's degree in Engineering, Quality Assurance, or a related field, • Minimum of 3 years of experience as a Quality Inspector in a manufacturing environment, preferably in the medical device industry, • Proficient knowledge of ISO 13485 and FDA regulations for medical devices, • Expert-level skills in using precision measuring instruments, especially calipers, • Familiarity with statistical process control (SPC) and quality management systems, • Strong attention to detail and ability to maintain accuracy under pressure, • Excellent problem-solving and analytical skills, • Effective communication skills, both verbal and written, • Ability to read and interpret technical drawings, specifications, and procedures, • Proficiency in Microsoft Office suite and quality management software, • Certification in quality assurance or inspection (e.g., ASQ) is a plus

Job DescriptionQuality Control Technician Broadata Communications, Inc. (BCI) – Torrance, CA On-site Company Overview Broadata Communications, Inc. (BCI) is a privately held California-based corporation and a leader in developing innovative, market-driven products for the transmission of digital multimedia (video, audio, and data) over fiber. Our clients include world leaders in industries spanning entertainment, broadcast, medical, professional audio/video, house of worship, education, government, military, and transportation sectors. Job Summary We are seeking a talented and motivated Quality Control Technician focused on Video & Audio systems. This hands-on role is critical in ensuring the quality and reliability of our Pro AV products, directly contributing to our reputation for excellence. The QC Technician will work closely with the Engineering and Production Departments to verify product integrity and ensure adherence to specifications before release and shipment. A key responsibility of this role is the inspection of incoming raw materials using industry-standard tools. We offer a dynamic and stimulating work environment with opportunities for professional growth and development within BCI. This is a hands-on position. This is NOT a remote or hybrid position. Key Responsibilities • Take ownership of incoming inspection activities, ensuring raw materials and components meet company and customer specifications., • Implement and execute AQL-based incoming inspection processes., • Perform inspection of AV hardware, electronic assemblies, mechanical components, and cable assemblies., • Verify dimensional requirements, labeling accuracy, configuration control, workmanship, and packaging., • Identify, document, and process nonconforming material within the Quality Management System (QMS) or ERP system., • Perform failure analysis and assist in structured root cause investigations., • Conduct First Article Inspection (FAI) and support Production Part Approval Process (PPAP) activities as required., • Assist in resolving internal and customer quality issues through technical evaluation and documentation., • Develop and update inspection instructions, procedures, and technical documentation., • Collaborate with Engineering to address hardware concerns and recommend corrective or preventive actions., • Support continuous improvement efforts within manufacturing and quality processes., • Other responsibilities as assigned.Education & Experience, • High School Diploma or GED required., • Associates degree preferred., • 4–6+ years of hands-on experience in quality control within electronics, AV hardware, or similar manufacturing environments., • Strong understanding of electronic, mechanical, and cable assemblies., • Experience with soldering and rework per IPC-A-610 and/or IPC-A-620 standards (certification preferred)., • Proficient with precision measuring instruments such as calipers, micrometers, vision measurement systems (VMS), and related inspection tools., • Ability to read and interpret electrical schematics, BOMs, and mechanical drawings., • Experience documenting inspections and nonconformances within QMS or ERP systems., • Familiarity with ISO 9001 environments required; ISO 13485 experience is a plus., • Exposure to Lean/5S or structured problem-solving methods preferred., • Degree in Engineering or related technical field is beneficial but not required.Skills & Abilities, • Strong organizational skills, attention to detail, problem solving, and analytical abilities., • Ability to manage multiple projects and tasks simultaneously while adhering to strict deadlines., • Highly responsible, self-motivated, and able to thrive in an energetic, fast pace, high growth, entrepreneurial environment., • Strong team player who can build strong relationships at all levels of the organization., • Ability to work independently, prioritize tasks, meet aggressive deadlines, and work extended hours, as needed., • Proficient in using lab equipment and tools relevant to AV product testing., • Demonstrated commitment to personal career growth and a willingness to self-learn and work in new technology domains., • Detail-oriented team player with excellent documentation and communication skills.Benefits, • Medical, vision and dental insurance, • 401(k) with company match (100% of the first 4% in eligible compensation), • Flexible Spending Account, • 2 weeks paid vacation, • 1 Week sick pay, • 10 company holidays, • Group life insuranceSalary Range, • Hourly: $32 - $44Pay may vary depending on experience, qualifications, and other job-related factors. Powered by JazzHR dOAOoyAtXh

Job Description Overview: Empower RF Systems is a leading provider of high-power ultra-broadband radio frequency (RF) amplifier solutions. Headquartered in Inglewood, California and founded in 1999, the company and designs and manufactures solid state RF amplifier systems/modules for commercial and military customers worldwide. Position Summary: Reporting to the Director of Quality, the Quality Assurance Receiving Inspector is responsible for the inspection and disposition of incoming components/raw materials, in-process inspection and finished product inspection. Primary Duties: · Performs incoming inspection and disposition of all purchased sheet metal, mechanical, electro-mechanical, amplifier modules, and systems to established engineering drawing requirements. · Performs in-process and final inspection of amplifier modules and rack mounted amplifier systems, and finished product inspection. · Identifies optimum inspection tools/gauging, and inspection methods for sheet metal, mechanical, electro-mechanical, and electronics components and assemblies. · Monitors and manages the nonconforming material and MRB board review process for purchased parts, assemblies, internal line rejects and other nonconforming materials. · Identifies discrepant parts / assemblies and drives corrective action with sub-tier suppliers. May prepare and create supplier scorecards, manage sub-tier supplier metrics, and support future dock-to-stock programs as defined by QA Manager. · Prepares and disseminates supplier quality information and provides reports regarding the inspection and test status of products, nonconforming material reject trends and other reporting as directed by supervision. · Manages external contract calibration service including monitoring calibration recall schedules for all inspection and test equipment. Ensures compliance to ISO 9001 requirements. · Performs QA buyoff acceptance on re-worked products and assemblies to ensure compliance to customer requirements. · Performs first article inspections, measurement analysis, in-process inspection, pre-cap visual internal inspection of amplifier PCBA modules to J-Std-001 and IPC-A-610 level 3 inspection requirements. · Reviews MSDS and shelf life information for purchased shelf life control items. Manages shelf life control procedures. · Maintains material certifications from Receiving Inspection. · Works on special projects as assigned. Key Qualifications: • Minimum of 5 years of incoming Quality Control experience, preferably in a mil-spec aerospace environment., • Must have understanding of Quality Management Systems (ISO 9001)., • Requires specific and thorough understanding of quality inspection methods, good analysis skills and technical knowledge. Knowledge of advanced shop math is a must., • Must have working familiarity with AQL sample inspection techniques, Zero acceptance lot sampling., • J-STD-001 certified trainer/technician or IPC-A-610 workmanship standards technician or ASQ Certified Quality inspector technician status is a big plus., • Must have working knowledge of Microsoft Office suite, including Word, Excel, Powerpoint, and Access., • Must be detail-oriented with excellent interpersonal communication skills., • Must have knowledge of GD&T, blue print and specification interpretation., • Proficient in the use of all inspection hand gauges including micrometers, dial indicators, vernier calipers, height gauges, internal and external thread gauges, ID/OD micrometers, bore gauges, etc. Summary: If you are an experienced QA Receiving Inspector with a background in mechanical inspection in an electronic manufacturing facility, Empower RF Systems is the company that will further your experience and career growth. We offer a competitive salary, comprehensive benefits including medical / dental insurance, 401k Plan with matching contributions, etc. To learn more about Empower RF Systems, please visit our website at . Empower RF Systems is an Equal Opportunity Employer of females, minorities, individuals with disabilities and protected veterans

Job DescriptionBenefits: • Bonus based on performance, • Competitive salary, • Free uniforms, • Opportunity for advancement We truly believe in investing in our employees and creating a work culture unlike any other. We also offer huge opportunities for growth. This is an experienced position, and the ultimate candidate will have at least 2+ years of skilled gutter and/or exterior construction experience. A positive attitude is a must, as well as the ability to properly, and comfortably interact with clients and other employees. You will be groomed for leadership in the field, to be part of a family, and to grow with an established brand. Find out why our culture is at the core of being a Top 100 Culture Award Winner and an official Certified Great Place to Work! Experienced Gutter Installer Requirements: • 2+ years of experience in gutter installation including both K-style & half round gutters, • A positive attitude, • Excellent communication skills, • Ability to work outdoors in all weather conditions/seasons, • Interest in growing with the company, • Willingness to work overtime, • Be a team player, • A desire to establish a positive work culture, • OSHA certification and/or ladder safety training preferred, • Construction/Gutters: 2+ years, • Must be 18 or older The Brothers That Just Do Gutters is a rapidly growing, locally owned, and operated franchise with multiple locations across the country. Our mission is to "Reinvent Contractor Service" by providing a great place to work and delivering 5-star service every step of the way from initial phone inquiry, home visit, inspection and estimate, scheduling, timeliness, installation, follow-up, and ongoing support and service. We want to do what's right for our employees, customers, and communities. Apply today!

Job DescriptionFor more than 30 years, SQA Services has been a leading provider of managed supplier quality services, offering audits, assessments, remote surveillance, corrective actions, remediation, inspections, and engineering solutions to manufacturers across all industries. We deliver these services by deploying a network of highly skilled associates based throughout the United States and in over 90 countries worldwide, ensuring rapid on-site support at your supplier locations. Our associates are expert quality assurance professionals with extensive experience and local expertise, enabling us to represent our clients on demand and with greater speed and efficiency than our competitors. We’re hiring for a Quality Mechanical Inspector position in Hawthorne, CA, on a 6-month contract. The schedule is for the first shift or second shift, full-time. If you have a passion for mechanical products and a keen eye for quality, this could be the perfect opportunity for you!Key Responsibilities • Review and validate e-Cert packages for components, subassemblies, and final assemblies, • Verify inspection records, test results, certifications, signatures, and approval workflows, • Identify, document, and communicate discrepancies or nonconformances to Quality and Engineering, • Ensure compliance with drawings, specifications, QMS requirements, and build plans, including traceability, • Perform visual, dimensional, and physical inspections (incoming, in-process, final, and first article), • Conduct surface plate inspections and lot sampling as required, • Use precision tools such as micrometers, calipers, height gauges, dial indicators, and profilometers, • Inspect workmanship issues (burrs, scratches, fasteners, edge distance, damage), • Verify corrective actions and rework completion, • Review shipping documentation and confirm proper packaging and preservation, • Provide summary reports, weekly status updates, and support continuous improvement effortsRequired Qualifications, • 3+ years of experience inspecting precision mechanical parts, • Strong ability to read and interpret engineering drawings and GD&T, • Proficient with hand inspection tools (tolerances ≥ .005”), • Comfortable working with digital systems and new software, • Excellent attention to detail and visual inspection skills, • Must pass a background check, • ITAR compliance requiredPreferred Qualifications, • Associate's degree or higher in a related field, or equivalent experience. #ZR We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description If you've ever watched a shop miss a delivery because the schedule didn't account for a quality hold on OP2, and thought "I could fix that," this role was built for you. ⠀ ???????????????????? ???????????? ???????????????????????????? Pave Talent is hiring on behalf of our client, an ISO 13485 certified precision CNC contract manufacturer in Hawthorne, CA specializing in orthopedic surgical implants, bone screws, and tight-tolerance components used in real surgical procedures. Founded by engineers with a machining legacy going back to the 1940s, this is a company that takes quality seriously and is currently in an active growth phase, scaling both headcount and production capacity across Swiss turning and multi-axis milling operations. ⠀ ???????????? ???????????????????????????????????????????? You'll report directly to the General Manager and serve as the central nervous system of a multi-machine CNC shop floor. This is not a paper-pushing scheduling role. You'll own the master production schedule across CNC mills, lathes, Swiss turning centers, and secondary operations, and you'll be the person who knows where every job is, what's at risk, and what to do about it. The shop runs two full shifts with strong customer demand and a fast-moving floor. You'll be the one who sees around corners before problems become late shipments. ⠀ ???????????????? ????????????'???????? ???????????? • Build and maintain the master production schedule across OP1, OP2, OP3, and downstream processes for CNC mills, lathes, and Swiss turning equipment, • Sequence and balance work orders against finite machine capacity, setup times, run times, and labor constraints in real time, • Coordinate raw material availability with Supply Chain and receiving to prevent floor stoppages before they start, • Integrate quality checkpoints (First Article Inspections, in-process inspections, final inspection capacity) directly into the schedule, • Adjust schedules dynamically for machine downtime, quality holds, MRB activity, rework events, and customer expedites, • Serve as the primary scheduling interface between machining, quality, procurement, shipping, and sales teams, • Lead or participate in daily and weekly production meetings, clearly communicating priority changes, schedule risks, and recovery plans, • Use Global Shop ERP to manage work order flow, flag long-lead material risks, and monitor schedule adherence ⠀ ????????????'???????? ???? ???????????????????????? ???????????? ???????? ???????????? ???????????????? ????????????????????????????????: • Hands-on understanding of CNC machining environments, including multi-operation routings, setup vs. run time tradeoffs, and machine bottlenecks, • Proven experience building finite production schedules (not theoretical ERP plans that ignore real-world constraints), • Ability to read and interpret routers, work orders, and travelers, • Advanced Excel or Google Sheets proficiency for scheduling and capacity planning, • Strong judgment under pressure and comfort pushing back when a schedule is not realistic ???????????????????? ????????????????????????: • Experience with Global Shop or similar ERP/MRP scheduling software, • Aerospace, defense, or medical device manufacturing background (ISO 9001, AS9100, or ISO 13485 environments), • Background in production control, planning, or manufacturing supervision, • Lean manufacturing exposure (Kaizen, flow, pull systems) ⠀ ???????????????????????????????????????????????? ???????????? ???????????????????????????????? ????????????????????????: Competitive, commensurate with experience ????????????????????????????????: Full-time, on-site in Hawthorne, CA (near LAX, off the 105 freeway) ????????????????????????: Medical, dental, and vision insurance ????????????????????????????????????????: 401(k) with company matching ????????????: Paid time off ???????????????????????????????????????? ????????????????: Full-time, direct hire ⠀ Interested? Apply and we'll be in touch. Confidential search; your application is fully private. ???????????????? ???????????????????????? | ???????????????????????? ????????????????????????????????????????

Job DescriptionSalary: $115,000 - $165,000 Position: Electrical Engineer Communications Quantum Space Location: Hawthorne, California Commitment: Full-time Who Were Looking For Quantum Space is developing high-agility spacecraft platforms to deliver rapid, reliable services in cislunar and GEO environments. We are seeking a highly capable Electrical Engineer Communications to lead and support the architecture, procurement, and integration of RF communications systems for our next-generation missions. Youll be responsible for designing, analyzing, and validating end-to-end communication systemssupporting both flight and ground implementations. This role is highly cross-functional, touching spacecraft design, ground segment operations, AI&T, and regulatory coordination. Where Youll Make an Impact • Architect, implement, and test RF communications subsystems for Quantum's spacecraft, • Perform RF system-level analysis including link budgets, signal distortion, capacity, reliability, and performance evaluations, • Manage communications component suppliers and subcontractorsincluding requirements flowdown, delivery tracking, technical reviews, and non-conformance resolution, • Author subsystem-level requirements and validate compliance through analysis, test, and inspection, • Develop communications ground support equipment (GSE) to support spacecraft AI&T efforts, • Participate in communications subsystem integration during AI&T, • Support FCC licensing efforts and assist in preparing regulatory documentation, • Develop MATLAB-based tools to support internal RF analyses and simulation, • Collaborate with spacecraft systems, avionics, and electrical teams to ensure comms system compatibility and integration, • Support major design and readiness reviews (e.g., PDR, CDR, TRR, MRR) What It Takes • B.S. in Electrical Engineering, Aerospace Engineering, or related discipline (M.S. preferred), • 5+ years of experience supporting communications system development for spaceflight missions, • Proven track record of designing, analyzing, and integrating spacecraft RF communication systems, • Experience authoring subsystem requirements and validating through structured methods (analysis, test, inspection), • Familiarity with RF link budget development, modulation techniques, distortion sources, and overall system performance evaluation, • Experience managing vendors for flight RF hardware and associated documentation, • Hands-on experience developing and operating comms-related GSE, • Proficiency with MATLAB for simulation, modeling, and tool development, • Strong cross-functional awareness and systems-level thinking, • Comfortable operating in a fast-paced, iterative environment where priorities shift quickly Nice-to-Have Experience • Strong background in core EE fundamentals (analog/digital circuits, power, grounding, etc.), • Experience with spacecraft data buses and interfaces (RS422/RS485, SpaceWire, Ethernet, SERDES, LVDS, CAN, Discrete IO, Cameralink), • Experience working with optical communication systems, • Experience working within cleanroom and ESD-controlled environments around flight hardware, • Familiarity with avionics system architecture, electrical power system (EPS) architecture, , and spacecraft power modeling, • Hands-on experience with ECAD tools like OrCAD or Altium for schematic capture, layout, and parts library management, • Experience with circuit simulation tools (e.g., LTSpice, PSpice), • Fluency in Python or other scripting languages, • Knowledge of code verification and validation methodologies, • Experience with FPGA-based systems and HDL programming (VHDL, Verilog), • Prior team or project management experience, • Certifications: NASA-STD-8739.4, IPC-620, J-STD-001, IPC-7711/7721 What Youll Get • Ownership Drive the communication system architecture that enables in-space autonomy and reliability, • Innovation Design end-to-end comms solutions for fast-moving missions and novel applications, • Impact Contribute to communications systems that connect and control Quantums fleet, • Growth Collaborate with a high-performing team and take on new technical leadership opportunities, • Compensation Competitive salary, equity, and comprehensive benefits including medical, dental, vision, generous leave, HSA, 401(k) matching, and equity sharing Additional Requirements To comply with U.S. Government space technology export regulations, including ITAR, applicants must be a U.S. citizen, lawful permanent resident, protected individual per 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Apply now. Join us in building the communications systems that power the future of spacecraft operations.

Job Description Job Title: Inventory and Logistics Specialist Job Description Join a dynamic team in a startup environment where you will play a crucial role in managing inventory and logistics processes. This position supports the production floor by ensuring items and tools are readily accessible and involves generating SKUs, inspecting daily deliveries, and assisting with inventory organization. Responsibilities • Utilize the ERP system to manage and organize inventory effectively., • Ensure the production floor has adequate access to necessary items and tools., • Generate SKUs based on barcodes for accurate tracking., • Inspect daily deliveries and prepare inspection reports on purchase orders., • Support the team with cleanup and staging of inventory., • Stage and facilitate production team activities., • Proficiency in ERP systems., • Experience with logistics and inventory management., • Willingness to work in a heavy manufacturing environment., • Comfortable performing various roles simultaneously. Experience the excitement of working in a startup environment that fosters innovation and growth. Be part of a team producing groundbreaking nuclear reactor components. Benefit from opportunities for overtime and additional weekend work, enhancing your professional development. Work Environment The work environment is set in a startup atmosphere with a focus on producing nuclear reactor components. The facility offers training and certification on sit-down forklifts. The standard working hours are from 7:30 AM to 5:00 PM, with the possibility of overtime and weekend work. The manufacturing environment is robust and requires adherence to safety protocols. Job Type & Location This is a Contract to Hire position based out of Compton, CA. Pay and Benefits The pay range for this position is $18.00 - $18.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Compton,CA. Application Deadline This position is anticipated to close on Mar 17, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionDescriptionVenturi Astrolab, Inc. (Astrolab) is pioneering new ways to explore and operate on distant planetary bodies. We are singularly focused on designing, building, and operating a fleet of multi-purpose commercial planetary rovers to extend and enhance humanity’s presence in the solar system. We are seeking motivated, creative, and exceptional people to join our world-class team. We are seeking a meticulous and experienced Quality Inspector to uphold the highest standards of quality for our products. The Quality Inspector will perform detailed inspections at various stages of production, including receiving, in-process, and final inspections, ensuring compliance with technical drawings, specifications, and industry standards. This role requires proficiency with precision measurement tools and a keen eye for detail to identify defects and ensure product integrity. What you'll do: • Receiving Inspections including incoming packages for gross damage; verification of part number, revision, quantity, and proper Quality Clause documentation per the supplier Quality Manual; dimensional verification to the print and other specification callouts like part marking, etc., • In-Process & Final Inspections including closeout reviews for proper installation, wiring, and functionality; ensure no foreign object debris is present; validate revision, part numbers, flight pedigree, and lot serial numbers; visual inspections for damage; validate conformance to drawing specifications; review test packages; and confirm all contract deliverables are met, • Lead calibration for the organization, • Build procedure review and approval, • Material review board process includes issue ticket review and physical part movement, • Proven experience in quality inspection, preferably in an Aerospace manufacturing or technical environment, • Blueprint reading and GD&T knowledge, • Proficiency with precision measurement tools (calipers, micrometers, height gauges, and bore gauges), • Familiarity with industry standards and technical documentation, • Strong attention to detail and ability to interpret engineering drawings and specifications, • Excellent problem-solving skills and ability to work independently or as part of a team, • Basic computer skills for data entry and documentationWork Environment, • This role may involve standing for extended periods and working in a production or warehouse setting, • Join a team of best-in-class engineers building the foundation of planetary surface exploration, • Equity ownership in the company, • Comprehensive health benefits, including medical, dental, vision, and mental health support, • 401(k) plan with company match, • Flexible PTO and parental leave, • Home office set-up reimbursement, • Fully flexible and remote-friendly work environment, • Weekly lunch stipend, plus complimentary snacks and beverages on-site, • Twice a month, social hour on-site with food and drinks

Job DescriptionDescriptionAs a Mechanical Engineer at Impulse for our Vehicle Engineering Team, you will own all aspects of the design, analysis, build, test and integration of flight hardware – working with cross-functional engineering teams to accomplish this. This means cradle-to-grave ownership of pressurized and/or unpressurized structures in support of Impulse’s collection of next generation advanced propulsion space vehicles. Responsibilities • Design, analyze, build, test, and document innovative structures; example systems include primary structure weldments, tank internal fluid/structural devices, payload attachment fittings, and stage propulsion/avionics integration hardware, • Steer system definition, layout, requirements, and verification, • Support first article build through the ramp to production in collaboration with the manufacturing team, rolling in DFM and reliability improvements, • Support development and qualification test campaigns in collaboration with the test team, creating test plans to gather key learnings and demonstrate flightworthiness, • Establish driving load cases and environments in collaboration with the loads/dynamics and thermal teams, • Collaborate effectively with partner teams (such as propulsion, avionics, and GNC) to create a high performing, integrated system Minimum Qualifications • Bachelor’s degree in Mechanical Engineering or related field, • 5+ years demonstrated experience designing and analyzing structural aerospace hardware, • Strong knowledge of strength and stability hand calculations for structural sizing and model validation, • Strong understanding of mechanics of materials, material failure modes, and associated analysis methods, • Familiarity with a wide set of manufacturing processes such as machining, welding, forming, and joining methods, • Proficiency with CAD software and assembly management, • Demonstrated experience working collaboratively across different teams, • Ability to communicate technical challenges, explain rationale and/or resolve concerns Preferred Skills and Experience • Master’s degree in Mechanical Engineering or related field, • 7+ years of demonstrated experience designing and analyzing highly performant structures with space-flown hardware, • Experience with aerospace aluminum welding, inspection, and allowables development, • Experience with composite primary or secondary structure design, analysis, and testing, • Experience with payload accommodations, testing, and validation, • Experience with structural testing, validation, and correlation methods, • Experience working on a launch vehicle development effort, • Experience in a startup or agile development environment Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description About the Opportunity Our client is an innovative technology company building the future of subsea inspection and marine robotics. They are developing autonomous surface vessels capable of deploying underwater ROVs to inspect critical global infrastructure—from the fiber optic cables that power the internet to the pipelines supplying the world’s energy. We are looking for a hands-on Electrical Systems Engineer to own the vessel-wide electrical architecture. In this role, you won't just be designing small components; you will architect the entire electrical ecosystem, from propulsion and energy storage to power distribution and communications. If you thrive in fast-paced startup environments and want to build production-ready systems that operate in harsh ocean conditions, this is the role for you. What You’ll Do • Own the Architecture: Take full ownership of vessel-wide electrical architecture, including propulsion, energy storage, power distribution, control, and communications systems., • System Design: Define system topologies, interfaces, and grounding/shielding strategies to ensure maximum safety, robustness, and serviceability in marine environments., • Schematic Development: Create block diagrams, power-tree diagrams, and system-level schematics to guide PCB, harness, and enclosure designs., • Power Management: Define and track power budgets and current paths across all subsystems, analyzing worst-case and transient conditions., • Component Selection: Lead the evaluation and selection of power electronics, sensors, converters, and communication interfaces, balancing performance, environmental ratings, cost, and lifecycle., • Cutting-Edge Robotics: Move beyond standard electrical engineering to build autonomous surface vessels and subsea ROVs., • Total Ownership: You aren't a cog in a machine; you are the architect of the machine. You will own the design from concept to production., • Global Impact: Your work ensures the reliability of the infrastructure that connects and powers the world., • Bachelor’s degree in Electrical Engineering or related field., • Proven experience in electrical system architecture (preferably in robotics, automotive, aerospace, or marine sectors)., • Experience with power distribution, energy storage, and electromechanical systems., • Ability to work on-site in El Segundo, CA., • Note: Visa sponsorship is not available for this position.

Job Description We’re hiring for a Quality Mechanical Inspector Level 2 position in Long Beach, CA. This is an opportunity in which you will be supporting the first or second shift. This is a Full-time position. This is a 6 month contract opportunity, working Monday through Friday on the 1st shift. If you have a passion for mechanical products and a keen eye for quality, this could be the perfect opportunity for you! Key Responsibilities: • Support Receiving Department by performing inspections of machined rocket parts and associated documentation to reduce backlog of parts and paperwork., • Perform detailed inspections—visual, dimensional, and physical—on components, assemblies, and raw materials throughout various production phases (including in-process, final, and first article) to verify compliance with engineering drawings and specifications., • Operate and utilize precision measuring instruments such as micrometers, dial indicators, gauge blocks, height gauges, and profilometers to validate part conformity., • Conduct surface plate inspections and statistical lot sampling based on quality requirements., • Apply sharp visual inspection skills to identify workmanship issues and product defects, including damage such as burrs, scratches, loose fasteners, dings, and inadequate edge distances., • Identify and categorize nonconformities and confirm that corrective actions or rework have been properly executed., • Receiving shipping documentation for accuracy, confirming part numbers, serial numbers, change notices, and destination data are correct., • 3+ years of hands-on experience with precision mechanical parts inspection., • Strong ability to read and interpret manufacturing drawings and industry/commodity standards., • Proficient in GD&T and validating dimensions (tolerances ≥.005”) using hand tools (e.g., micrometers, calipers, height gauges)., • Ability to adapt to new technology and software., • Excellent visual acuity to detect defects in complex products., • Must be willing to undergo a background check., • Must be ITAR compliant. Apply now and become part of something extraordinary!

Job Description JOB SUMMARY: Responsible for the creation and accumulation of first article detailed inspection reports, daily inspection records, tooling inspection reports, welder qualification reports, first piece inspection sign off, and any AS9100D reports. Responsible for forwarding this information to final inspection with detail or assembly parts manufactured to Customer requirements. Also, will perform reverse engineering. MATERIALS, TOOLS, AND EQUIPMENT USED: · All forms of purchased parts and assemblies of vendor or company design in ferrous or non-ferrous metals and other types of materials and supplies. · PCMM (Verisurf 2018) and · Precision measuring instruments such as micrometers, height gauges, dial indicators, calipers, profilometer, thread gauges, pin gauges, and special gauges. Also, fixtures, templates, scales, and inspection stamps. · PCMM (Verisurf 2018), surface plate and accessory equipment, and templates. Computer for utilization of customer portals (Net Inspect, etc.) REQUIRED SKILLS, ABILITIES, QUALIFICATIONS: · Ability to perform reverse engineering and interpret complex blueprints, which are difficult to visualize. · Complete any type inspection of purchased detail parts and major assemblies. · Use precision measuring instruments and hardness testing equipment. · Have a thorough knowledge of all forms of different metals. Have a thorough knowledge of process engineering standards and finish requirements. · Know arithmetic involving addition, subtraction, and conversion of fractions and decimals, and also geometry. · Ability to perform data entry in Microsoft programs. Company DescriptionSince 1949 ACE Clearwater Enterprises has been building complex formed and welded assemblies for the aerospace and power generation industries. We say that "If it flies, we have parts on it". Operating from three facilities within a 10 sq. mile radius in Southern California, our employees are the best problem solving team in the business. ACE is the place for Engineering, Forming, Bending, Welding, Machining , Waterjet and Assembly. We have over 400,000 square feet of pure manufacturing agility and people with the experience to make it happen. 1949 ACE Clearwater Enterprises has been building complex formed and welded assemblies for the aerospace and power generation industries. We say that "If it flies, we have parts on it". Operating from three facilities within a 10 sq. mile radius in Southern California, our employees are the best problem solving team in the business. ACE is the place for Engineering, Forming, Bending, Welding, Machining , Waterjet and Assembly. We have over 400,000 square feet of pure manufacturing agility and people with the experience to make it happen.\r\n

Job DescriptionBenefits: • 401(k) matching, • Bonus based on performance, • Competitive Pay, • Monthly bonus paid on performance, • Professional Development, • Paid Time off Responsibilities: • Identify, qualify, and develop personal insurance opportunities with new and existing clients in person, online, by phone, and through written communication., • Foster and maintain excellent relationships with clients and prospects through regular follow-up, accurate and timely quotations, and general account support. Anticipate, respond to, and follow up on all existing client needs., • Actively prospect and solicit increases in existing client coverage as well as network for new clients, including win backs., • Provide prompt, accurate, and friendly customer service. Service can include responding to inquiries regarding insurance availability, eligibility, coverages, policy changes, transfers, claim submissions, and billing clarification., • Obtain best coverage/rate for insured, process quotes, and bind insurance coverage; follow up as necessary with inspection, photos, and other documentation. Present policies to insured and educate them on coverages and rates., • Foster and maintain excellent relationships with customers and prospects through regular follow-up, timely quotations, and general account support., • Support and prepare clients for renewal and retention, and maintain strong client relationships., • Anticipate, respond to, and follow up on all existing client needs., • Monitor, review, and report on key metrics to ensure sales targets are achieved and execute sales activity documentation in a timely, accurate, and professional manner., • Collaborate with team members, mentor staff, provide expertise and answer questions, and participate in formal and informal meetings as needed., • Maintain CE and participate in ongoing education and keep informed regarding industry information, new product information, legislation, coverages, and technology to continuously improve knowledge and performance., • Develop leads, schedule appointments, identify customer needs, and market appropriate products and services., • Enthusiastic about the role insurance and financial products play in helping people manage the risks of everyday life, recover from the unexpected, and realize their dreams, • Successful track record of meeting sales goals/quotas preferred, • Achieve mutually agreed upon marketing goals, • Ability to work in a team environment, Self-motivated,, • Possess a valid drivers license and a source of reliable transportation., • Demonstrate strong knowledge of insurance products and usages, rating procedures, underwriting procedures, coverages, and industry operations to effectively secure new business and maintain an existing client base., • Be people-oriented, customer-focused, and professionally assertive in developing new client relationships and servicing existing clients., • Ability to multi-task, heavy phones, • Possess outstanding organizational skills with an ability to complete difficult assignments without supervision, sound business judgment, strong decision-making, and superior written and verbal communication skills., • Have excellent time management skills, thrive in a team environment, and Technology and Computer proficiency including agency management systems., • Bilingual - Spanish preferred, • Property and Casualty license (must be able to obtain), • Life and Health license (must be able to obtain)

Job Description Overview PRIDE Industries is a fast-paced company with a mission: To Create Jobs for People with Disabilities while providing high quality, value-added solutions to our nationwide customers. We are currently recruiting to fill the following position: Responsibilities PRIDE Industries Job Description Job: Quality Program Manager Job Code: N02 - PR-Quality Program Mgr HR Title Group: Quality Salary Grade: E13 FLSA Status: Exempt Approval Date: August 2017 SUPERVISES: There may be direct reports with this position. POSITION SUMMARY: Under minimal supervision, the Quality Program Manager (QPM) oversees, manages and reports on all site related Quality Management Systems (QMS) programs, policies, processes, initiatives and operations for the assigned contract. This job class requires comprehensive knowledge of Quality Assurance/Quality Control (QA/QC) functions, continuous improvement, related contract industry standards as well as the ability to organize and budget time and resources while managing multiple projects and priorities. TYPICAL DUTIES: 1. *Coordinate, plan, organize, execute and report on all QA/QC activities for assigned sites’ contractual obligations; serving as the functional expert on all QMS standards, policies and procedures., 2. *Consult with management and customers to effectively implement and monitor the sites QMS program., 3. *Compile, author and report on QA/QC statistical data for customer, local and corporate management reviews., 4. *Analyze, audit and recommend revisions to site core business policies, processes and procedures., 5. *Perform Document Control functions for site QMS documents by authoring, revising and distributing updates., 6. *Coordinate and manage all aspects of the nonconformance, corrective and preventive action programs., 7. *Respond to, investigate, document, track and follow-up on operational customer complaints., 8. *Author and revise site specific Quality Control Plan, processes and procedures per contract terms and modifications., 9. *Participate in various site, customer and regulatory contract meetings and quality related audits and investigations., 10. *Evaluate and determine the course of action for inspection activities that identify nonconformance’s., 11. *Coordinate with management and facilitate meetings to resolve contract quality, production and efficiency issues., 12. *Coordinate and conduct QMS training for site employees and customers to ensure compliance and understanding., 13. *Coordinate Customer Surveys IAW the QMS and site customer survey procedures;, 14. Perform joint government/PRIDE management quality inspections for contract requirement verification., 15. Support the site safety program by working with site personnel and auditing safety activities., 16. Perform other duties and special projects as assigned. • Denotes Essential Job Function MINIMUM QUALIFICATION: • Three or more years of experience in quality;, • General knowledge of assigned line of business/industry skill sets, i.e. carpentry, electrical, plumbing, HVAC, construction, custodial, grounds, and hospital housekeeping;, • General knowledge of QA/QC processes and/or formal certifications in ISO, Six Sigma, Lean, TQM or other preferred;, • Experience with various QA/QC and/or trade tools, equipment, concepts, codes and industry standards preferred;, • Ability to effectively supervise and develop assigned team to meet strategic goals;, • Ability to communicate effectively both orally and in writing; to make presentations and respond to inquiries by senior management, customers, employees, public, and/or PRIDE’s board of directors;, • Demonstrated leadership, organizational, reasoning, problem solving and analytical skills;, • Human relations skills to build effective relationships with team, customers and public;, • Exceptional customer service skills;, • Advanced computer literacy including knowledge of word processing, spreadsheet, database and presentation software;, • Knowledge of business English including vocabulary, spelling, and correct grammatical usage and punctuation;, • Mathematical skills to include the ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations;, • Ability to establish priorities and solve a wide range of business, operational and strategic management problems;, • Flexibility to respond to changing work priorities and handle numerous projects at the same time. EDUCATION REQUIREMENTS: Bachelors in Business Administration or related field A comparable combination of formal education and work experience will be considered. CERTIFICATES OR LICENSES REQUIRED: The following licenses or certificates may be required depending on local, state and/or contract requirements: Customer Clearances Valid Driver's License PHYSICAL REQUIREMENTS: Employees must have the ability to perform the following physical demands for extended periods of time with or without assistance: • Utilizing keyboard, • Viewing computer screen, • Bending, kneeling, stooping, squatting and reaching, • May require climbing ladders and/or step stools, • Standing and walking, • Maneuvering in and around the worksite WORK ENVIRONMENT: Work is performed primarily in an office environment with limited privacy and exposure to noise from others conducting business. The remainder of work is performed on job sites in the field, driving to and from worksite. Employees may be exposed to hazardous equipment, toxic substances, noise from equipment, and depending on external weather conditions, wind, rain, cold, and heat. DISCLAIMER: The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees to this job. Employees are expected to follow their supervisor’s instructions and to perform the tasks requested by their supervisors. At PRIDE, we make a difference in the lives of many, one job at a time. Qualifications Ready to make an impact? Join an organization where business meets purpose, and every role contributes to a greater mission. Apply today at PRIDE Careers and be part of something meaningful. Learn more about who we are and what we stand for at . PRIDE Industries is an Equal Opportunity Employer. All qualified applicants will be considered for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, veteran status, or any other characteristic protected by law. Thank you for considering a career with us—we look forward to connecting with you!

Job Description The Restaurant General Manager is responsible for leading the restaurant team to deliver outstanding guest experiences, achieve sales and profit targets, and ensure compliance with all brand standards. The RGM drives culture, training, and execution, serving as the key leader in the daily operation of the restaurant and strict adherence to uniform standards and company policies (including but not limited to no cellphone use during work hours, professional appearance, and proper uniform compliance). The position requires a valid driver’s license, reliable vehicle for transportation, active car insurance, and basic computer skills. The RGM must successfully pass all ROCC evaluations at all times, complete bank deposits as required, and be available for relocation if business needs require. Key Responsibilities: • Operational Leadership, • Ownership of your restaurant’s success metrics and lead restaurant team to reach goals, • Lead the guest experiences in your restaurant that includes friendly interactions, a clean restaurant and fresh meals, • Manage all daily restaurant operations including food preparation, service, safety, and cleanliness., • Maintain full compliance with KFC standards and all local/state health regulations., • Execute marketing promotions and ensure product quality and consistency., • People Leadership, • Recruit, train, and develop Shift Supervisors and Team Members., • Grow and mentor your KFC family through training, development and onboarding new team members, • Lead communications of your team’s goals, upcoming promotions, business updates, etc, • Inspire the overall positive and collaborative family environment, • Conduct daily pre-shift meetings and weekly performance reviews., • Create a positive work environment focused on teamwork and accountability., • Financial & Administrative, • Control labor, food cost, and other controllable expenses to meet budget goals., • Accurately complete all reports including sales, inventory, and cash handling., • Review daily sales and labor performance and take corrective action as needed., • Customer Focus, • Ensure every guest receives exceptional service and product quality., • Address guest feedback promptly and professionally., • Implement programs to drive repeat business and increase sales., • Compliance & Safety, • Enforce all safety, sanitation, and security procedures., • Maintain accurate team records, schedules, and timekeeping., • Ensure the restaurant is always inspection-ready., • Communication & Reporting, • Communicate daily with Area Coach regarding performance and opportunities., • Ensure all training certifications, recertifications, and brand programs are completed on schedule., • Success Factors, • Leads by example with high standards in customer service, food quality and cleanliness, • True business partner and has an ownership mindset relating to business results, • Mentors and coaches team effectively through training and development resources, • Builds a team through selecting and onboarding new hires, • Takes absolute pride in everything you do, • Goal-oriented leader that enjoys a fast-pace environment, • Deep appreciation and commitment to customer service and our guest’s experience Expectations: • Greet Guests:, • Every guest must be greeted with a warm, friendly smile and eye contact within 5 seconds of entering or approaching the counter or drive-thru., • Use polite and positive phrases such as:, • “Hi, welcome to KFC! How are you today?”, • “Thank you for coming in! What can I get started for you?”, • Provide Efficient Service:, • Take accurate orders quickly and confirm them clearly before processing., • Maintain professionalism and a calm attitude, even during busy periods., • Ensure that every order meets KFC quality and accuracy standards., • Implement Upselling:, • Offer guests value items or upgrades that complement their order, using suggestive selling language. Examples:, • “Would you like to make that a combo today?”, • “Would you like to add a dessert or drink to your meal?”, • “Our new chicken sandwich has been a favorite — would you like to try it today?”, • Upselling is not optional; it is part of our guest service standard and contributes directly to restaurant performance., • Close with Appreciation:, • Thank each guest sincerely and invite them back., • Example: “Thank you for choosing KFC! We’ll see you next time.”

Job DescriptionDescription: • Read and follow production and engineering drawings or assemblies to build microwave and millimeter wave components and subassemblies., • Perform mechanical assembly by using hand tools such as screwdrivers, tweezers, handpresses, and torque wrenches using manufacturing instructions., • Perform conductive-epoxy die attach by using hand tools with an accuracy of +/- 0.002 inches., • Perform diode placement and substrate fitting by using hand tools with an accuracy of +/- 0.002 inches., • Perform mixing, measuring and application of a variety of conformal coatings, elastomer, potting, and bonding materials to various assemblies., • Perform reliability testing of assembled components and subassemblies by using bond-pull and die-shear equipment., • Complete inline inspection or peer review to ensure parts and assemblies meet industry-defined ESD, quality, and workmanship standards., • Accurate completion of device paperwork and quality documentation., • Completes assigned work orders within the designated NetSuite time estimates., • Responsible for following the company safety and ESD regulations at all times., • Ensure work areas are kept neat, clean, and organized per company guidelines., • Performs other duties and/or specific projects as assigned. Requirements: • HS Diploma or equivalent is preferred., • Minimum 1-2 years of experience working in electronic industry required., • High degree of dexterity and good hand-eye coordination., • Ability to handle hand tools and delicate products or parts., • Must have good computer skills and able to read prints., • Basic knowledge is required in both written and spoken English.

Job DescriptionDescription: • Read and follow production and engineering drawings or assemblies to build microwave and millimeter wave components and subassemblies on the sensor line., • Perform mechanical assembly by using hand tools such as screwdrivers, tweezers, handpresses, and torque wrenches using manufacturing instructions., • Perform conductive-epoxy die attach by using hand tools with an accuracy of +/- 0.002 inches., • Perform diode placement and substrate fitting by using hand tools with an accuracy of +/- 0.002 inches., • Perform mixing, measuring and application of a variety of conformal coatings, elastomer, potting, and bonding materials to various assemblies., • Perform reliability testing of assembled components and subassemblies by using bond-pull and die-shear equipment., • Complete inline inspection or peer review to ensure parts and assemblies meet industry-defined ESD, quality, and workmanship standards., • Accurate completion of device paperwork and quality documentation., • Completes assigned work orders within the designated NetSuite time estimates., • Responsible for following the company safety and ESD regulations at all times., • Ensure work areas are kept neat, clean, and organized per company guidelines., • Performs other duties and/or specific projects as assigned. Requirements: -HS Diploma or equivalent is preferred -Minimum 1-2 years of experience working in electronic industry required. -High degree of dexterity and good hand-eye coordination. -Ability to handle hand tools and delicate products or parts. -Must have good computer skills and able to read prints. -Basic knowledge is required in both written and spoken English.

Job DescriptionElectronic Assembler II Broadata Communications, Inc. (BCI) – Torrance, CA On-site Broadata Communications, Inc. (BCI), is a privately held, California-based corporation. BCI is a leading and innovative company specializing in the development of market-driven products for the transmission of digital multimedia (video, audio, and data) over fiber. Many of BCI's clients are world leaders in their industries, which span a wide variety of industry segments including entertainment, broadcast, medical, professional audio/video, house of worship, education, government, military, and transportation. Job Summary We are seeking an Electronics Assembler II for our Operations Department. The successful candidate will have advanced electronics and mechanical manufacturing experience and will be proficient in soldering, mechanical assembly, and epoxy potting. The successful candidate will be responsible for assembly of an advanced electro-mechanical product to ISO 9001/ISO 13485 standards. This is a hands-on position. This is NOT a remote or hybrid position. Key Responsibilities: • Solder electronic components., • Perform prototype assembly per drawings and specifications where available., • Contribute to creation of assembly instructions for NPI products., • Perform production assembly, testing, and inspection., • Perform board level programming and testing., • Maintain material inventory with proper paperwork and electronic records per established ISO procedures., • Perform kitting of production projects., • Work with Purchasing and Quality Assurance groups to ensure timely and quality work product., • Work with local suppliers and vendors both remotely and on-site to coordinate orders and validate workmanship and part conformance., • Provide training in soldering best practices for other employees as required., • Other duties as assigned by management.Education & Experience:, • High School Diploma or equivalent with 3 to 5 years’ experience in related manufacturing assembly operations., • Experience with printed circuit board assembly and testing, electrical harness production, ESD control, and handling optical components are a plus., • Good soldering skills (SMT, through-hole, and harnessing.), • Good understanding of soldering work standards (IPC-A-610/J-STD-001.), • Understanding of inventory control in an electronics production environment., • Must be capable of following assembly procedures and drawings to perform mechanical system integration, as well as follow test procedures to perform functional testing., • Excellent verbal and written communication skills., • Ability to commit and work under deadlines., • Must be able to work in a challenging and engaging work environment that promotes teamwork, creativity, accountability, and professional development., • Current IPC-A-610 or J-STD-001 certification is a plus.Skills and Abilities:, • Strong organizational skills, attention to detail and problem solving., • Ability to handle multiple projects and tasks simultaneously while adhering to strict deadlines., • Highly responsible, self-motivated, and able to thrive in an energetic, fast pace, high growth, entrepreneurial environment., • Strong team player who can build strong relationships at all levels of the organization., • Ability to work with very little supervision, prioritize between multiple tasks, meet aggressive deadlines and work extended hours (as needed)., • Willingness and demonstrated ability to self-learn. xIDaKg6iKi

Job DescriptionElectronic Assembler Job Summary We are looking for a temp to hire Electronic Assembler to join an electronic manufacturing company in Inglewood. The Electronic Assembler provides the skill set and knowledge to properly configure complex RF power amplifier assemblies. Experience needed in RF components, RF devices, assembly techniques especially printed circuit boards for power amplifiers, including coaxial transformers, ferrites, and all RF related passive components. The Electronic Assembler makes all electrical harnesses and RF coaxial cables; includes soldering, wiring, mechanical and electrical assembly. Essential Functions • Works from production assembly instructions, schematics, rough sketches, and verbal instructions or notes to assemble, wire and install a wide variety of complex mechanical assemblies., • Performs various cable assembly operations on shielded cables, ribbon cables, and wire harnesses., • Performs operations such as assembling units of high complexity including printed circuit boards, modules, chassis, cable harnesses and similar tasks., • Typical cable assembly tasks include cable cutting, jacket removal, shield preparation and termination, ribbon cable preparation and termination, and stripping, tinning and termination of wire harnesses., • Performs a variety of miscellaneous shop work and other duties as assigned by supervisor., • Responsible to keep clean, orderly, and safe work areas., • Works with hand tools such as soldering iron, wire strippers, crimpers, wrenches, screwdrivers, and power tools., • Requires two or more years of assembling electrical parts, and familiarity with RF connectors., • Must have previous training in IPC J-STD-001 and IPC-A-610 certification or equivalent., • Must be able to read, write and speak basic English, perform basic math, and follow instructions., • Must be able to read and understand assembly prints, parts list, wiring diagrams and wiring lists. Schematic familiarity and understanding of part numbers, polarity designations, color codes, etc., • Manual dexterity required. Bending, stooping and lifting are performed daily. Capable of lifting 30 pounds from floor to bench using a proper lifting technique., • Must be able to walk, sit and/or stand throughout an eight or ten-hour day., • Position requires use of hand tools, power tools, and soldering irons in order to complete quality product., • Must be able to work on prototype, engineering and production type hardware, rough sketches, and verbal instructions or notes to assemble, wire and install a wide variety of complex mechanical assemblies., • Familiarity with manufacturing Quality and Inspection processes is a plus.

Job Description American Transportation Services has immediate openings for qualified trailer technicians. We provide a stable friendly work environment with many flexible shift options to suit your specific needs. Selected candidates will be responsible for maintaining primarily trailering equipment for a Fortune 500 package delivery company in a clean well-maintained environment. Responsibilities are, but limited to: · Preventative maintenance service and/or repair on trailers, dollies, and yard spotters · Perform routine service and annual inspections · Diagnose and repair anti-lock brake systems. · Electrical – air system trouble shooting. · Wheel & hub, heavy duty brake inspection and repair. · Trailer body repairs. · Suspension inspection and repairs. We offer competitive wages, flexible hours, as well as the following benefits: · Health insurance · Employer paid Life Insurance · Dental insurance · Vision insurance · Employer matching 401K · Incentive based bonus program · Paid vacation · Paid Holidays (upon completion 90 days of employment) · Flexible schedules, 4-10 work week available · Training programs · Opportunity to promote from within Qualifications are, but not limited to: · Must be 18 years of age · Must have basic computer skills · Must have necessary tools to perform job functions · Willing to work on becoming certified in DOT inspections, Air brake certifications, ASE certified. · MIG Welding preferred · Trailer repair: Minimum 1 years’ experience Required · Brakes (lining, chambers, slack adjusters, air lines, etc.) · ABS - System troubleshooting and repair · Side sheet repairs - patch · Corner Radius Repairs · Lighting - Troubleshooting and repairs · Landing gear repairs · Roll-up & swing door replacements/ repairs · Roof repairs – patch, section and replacement · Scuff liner repairs and or replacements · Suspensions repairs and replacement · Major trailer repair/wreck repairs · Bottom/top rail repairs and or replacements · Side sheet replacements · Floor section replacements · Threshold repair/replacements American Transportation Services is an equal opportunity at will employer and does not discriminate against any employee or applicant for employment because of age, race, religion, color, disability, sex, sexual orientation or national origin. Pay is based on verifiable experience and/or certifications and past working history. Company DescriptionAmerican Transportation Services | Experts at Onsite Maintenance Custom Trailer maintenance and shop solutions for the transportation industry.American Transportation Services | Experts at Onsite Maintenance\r\nCustom Trailer maintenance and shop solutions for the transportation industry.

Job DescriptionHadrian – Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We recently raised $260 million dollar Series C to accelerate this mission. We are excited to be launching a new Factory in Mesa, Arizona, a 270,000 square foot facility that will create 350 new jobs immediately. We are opening a new headquarters to support thousands of future hires, launching Hadrian Maritime to serve naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian works with startups, Tier 1 and Tier 2 suppliers, and major defense contractors across space, shipbuilding, and aviation to scale production, reduce costs, and accelerate delivery on mission-critical programs. We are backed by leading investors including Lux Capital, Founders Fund, and Andreessen Horowitz. Our fast-growing team is united by a shared mission to reindustrialize American manufacturing for the 21st century and beyond! The Role Maintenance Specialists are Hadrian's rapid deployment force for installs, commissioning, and uptime across machines, robots, and site infrastructure across our factories. The Maintenance Specialist takes full ownership of all maintenance activities within a specific section of our state-of-the-art factory. You’ll be integral to maintaining equipment efficiency and ensuring seamless production continuity. The role spans full-stack facilities systems -- electrical distribution, compressed air, vacuum, process cooling, HVAC, general utilities, and more -- demanding both broad technical range and thoughtful judgment. What You'll Do * Perform timely and effective maintenance on CNC machinery and robotic systems according to manufacturer guidelines, swiftly returning equipment to full operational status. * Liaise directly with manufacturers or external vendors to resolve issues rapidly and efficiently. * Diagnose and conduct root cause analysis for equipment breakdowns, distinguishing between mechanical, software, or other issues, and developing solutions to proactively mitigate future risks. * Prioritize and manage maintenance tickets proactively to minimize equipment downtime. * Standardize maintenance processes, equipping the technician team with clear, repeatable procedures and minimizing dependency on specialized knowledge. * Perform and maintain records of routine maintenance and preventative maintenance on assets. * Maintain documentation of repairs and maintenance performed. What We’re Looking For * Experience performing mechanical and electrical maintenance on CNC machines and robotics equipment. * Ability to learn quickly, leveraging self-discovery and external training resources as needed. * Strong technical understanding of mechanical, electrical, and hydraulic systems within advanced manufacturing contexts. * Clear communicator who can coordinate vendors and collaborate with engineers, operations; able to work off-shift or on-call during critical installs. What Will Set You Apart * Demonstrated experience installing and commissioning CNC machines, industrial robots, and associated automation in a live production environment. * Broad facilities skill set across electrical (high- and low-voltage), mechanical, pneumatic, hydraulic, and HVAC systems; able to read schematics. * Hands-on troubleshooting of drives, servos, PLC-adjacent I/O, sensors, VFDs, coolant and chip systems. * Maintenance system literacy for work orders, parts, and preventive plans; disciplined documentation habits Compensation For this role, the target salary range is $30-40/HR (actual range may vary based on experience). This is the lowest to highest salary we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. Benefits * Medical, dental, vision, and life insurance plans for employees * 401k ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR [here ](). Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions. You should be proficient in: • PLC Troubleshooting Skills, • Industrial and Manufacturing Engineering, • Equipment Troubleshooting, • Electrical Schematics, • Facilities Maintenance Experience, • Electrical Troubleshooting Skills, • Troubleshooting Skills, • Mechanical Troubleshooting Skills, • Pneumatics Experience, • 120/208/240/480 Voltage Systems, • CNC Machine Repair, • CNC Machine Installation, • Electrical Systems Diagnostics & Repair, • Preventive Maintenance & Inspection, • Industrial Robot Programming, • Electrical Installation, • Electrical Troubleshooting, • Electrical Repair, • Troubleshooting Industrial Automation Equipment, • PLC Programming Experience, • PLC Wiring Experience, • Electrical / Electronic Systems, • High Voltage Systems, • Pneumatics Troubleshooting, • Maintenance and Repair Skills, • Industrial Electrical Experience, • Machine Safety Inspections, • Troubleshooting CNC Machines, • Experience in a Manufacturing Environment, • Variable Frequency Drives (VFD), • Programmable Logic Controller (PLC) (Fanuc, Allen Bradley, Siemens), • Servo Motors

Job Description For nearly 30 years, SQA Services has been a leading provider of managed supplier quality services, offering audits, assessments, remote surveillance, corrective actions, remediation, inspections, and engineering solutions to manufacturers across all industries. We deliver these services by deploying a network of highly skilled associates based throughout the United States and in over 90 countries worldwide, ensuring rapid onsite support at your supplier locations. Our associates are expert quality assurance professionals with extensive experience and local expertise, enabling us to represent our clients on demand and with greater speed and efficiency than our competitors. We’re hiring for a Quality Electronics Inspector position in Hawthorne, CA. This is a 6 month long, full-time position, requiring 40+ hours of work per week, depending on project requirements. If you have a passion for electronic products and a keen eye for quality, this could be the perfect opportunity for you! Key Responsibilities: • Perform source inspections from external providers of products or services (e.g., conformal coating), • Conduct in-process and/or final inspections of critical features, including witness inspections, • Compile and complete final inspection sign-off sheets for inspection packages, • Verify that inspection tools and equipment can identify nonconformance, • Ensure inspection methodologies align with the intent of technical drawings, • Review and validate any justification for omitted inspections, • Audit supplier adherence to inspection plans, if applicable, • Inspect for hardware cleanliness and the absence of foreign object debris (FOD), • Verify correct application of safety wire, fastener installation, and compliance with spec requirements, • Confirm proper documentation and identification on shipping records, • Understanding of electronic components and electronic assembly processes., • Ability to read and interpret work instructions, procedures, technical drawings, schematics, and datasheets, • Familiarity with general quality inspection tools and techniques, • Must be willing to undergo a criminal background check, • Must be ITAR Compliant Preferred Qualifications:, • Knowledge of electronic assembly processes

Job DescriptionAbout Epirus Epirus is a high-growth technology company dedicated to overcoming the asymmetric challenges inherent to the future of national security. Epirus' flagship product, Leonidas, is a software-defined system built using intelligent power management techniques that allow power-hungry systems to do more with less. Job Summary: We are seeking a Senior Interactive Simulation Developer to lead the development of an immersive simulation environment for mission planning, training, UI/UX testing, and more. The ideal candidate will have a proven track record in developing high-quality products and simulations, particularly in Unreal Engine. As a senior team member, you will oversee the technical development, guide the project, and shape the simulation roadmap. Responsibilities: • Interpret electrical schematics, wiring diagrams, and harness drawings to independently build and troubleshoot complex harness assemblies., • Manufacture prototype and production harnesses—including shielded, twisted pair, coaxial, high-voltage, and multi-branch—following Epirus work instructions and prescribed standards., • Install, route, and rework harnesses within mechanical assemblies, enclosures, and vehicles., • Perform continuity, resistance, insulation, and functional testing using multimeters, oscilloscopes, hipot testers, and network analyzers or other specialized in process equipment., • Setup and operate crimping tools (manual, pneumatic, and hydraulic) to perform precision crimps on a variety of contacts and terminals per IPC/WHMA-A-620 and MIL-spec standards., • Inspect and verify crimp quality using pull testing, crimp micrometers, and visual inspection under magnification., • Support First Article Inspection (FAI), development builds, rapid prototyping, and final acceptance of electrical harnesses., • Ensure workmanship quality, maintain build traceability, and uphold zero-defect standards through proper documentation and process control., • Collaborate with production, test, and quality teams to resolve build issues and implement corrective actions., • Mentor and train Junior Harnessing Technicians., • Maintain accurate records of builds, rework, and inspections in accordance with AS9100 and ISO9001 quality standards. Basic Qualifications: • 5+ years of hands-on experience building aerospace/defense or high-reliability electrical harness assemblies., • Expert knowledge of hand tools and equipment used for crimping, stripping, cutting, and soldering., • Strong soldering skills. Ability to hand solder lap and lash splices, and fine pitch soldering cups., • Strong understanding of IPC/WHMA-A-620 standards, J-STD-001, and NASA workmanship standards., • Ability to read and interpret complex electrical and mechanical drawings, BOMs, and manufacturing plans., • Proficient with test equipment such as multimeters, hipot testers, and oscilloscopes., • Proven track record of building complex harnesses., • Comfortable in a fast-paced, iterative, and high-standards environment. Preferred Skills and Experience: • Minimum 8+ years' experience as a technician in defense, aerospace, or equivalent high‐reliability field, • Certified to J-STD-100, IPC-620, and IPC-610 or NASA STD8739.4, • Strong knowledge and experience in manufacturing, troubleshooting, testing, rework and repair of harnessing, • Experience with connectors (e.g., D38999, Glenair, Micro-D, Nano-D, MIL-spec coax)., • Familiarity with spacecraft, UAV, missile, or ground combat system harnessing practices., • Experience with cleanroom protocols and ESD-safe practices, • Experience with PLM and MES systems such as Oracle, Epicor, Ion, JIRA etc., • Ability to support light CAD work for layout and harness routing (SolidWorks Electrical, E3, or similar). Additional Requirements: • May be required to retain a TS Clearance ITAR REQUIREMENTS: As required by the Equal Pay Transparency Act, Epirus provides a reasonable range of minimum compensation for roles that may be hired. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and specific office location. For the state of California only, the range of starting pay for this role is:$40.69—$51.54 USD

Job Description General Position Summary Under general supervision, performs a wide variety of electromechanical or mechanical production sub-assembly and assembly operations to build up and assemble difficult and complex instruments. Duties may include following techniques to wire, prepare cable harnesses and install cable harnesses. Perform coating, mixing and cooking of raw materials to create finished products. Essential Job Functions Assembly Activities • Under general supervision, performs various tasks requiring knowledge of assembly techniques, tools, materials, machines and equipment., • Assembles electromechanical instruments or fabricated parts to make subassemblies or complete instruments using hand tools, power tools and special tools and/or calibration equipment., • Determines methods and sequence of assembly operations where complete information is not readily available or follows assembly shop and production operations sheets, wire lists, samples, blue prints, schematics and verbal instructions to perform a wide variety of assembly operations., • Fits, aligns, calibrates and adjusts parts and mechanisms to meet tolerances and product operating and quality requirements., • Works from engineering drawings, rough sketches, and manuals, verbal or written instructions from Lead Assembler or Supervisor., • Performs in-process and final quality inspection of assembled products., • Examines drawings and work orders to determine the work that needs to be performed., • Utilizes appropriate machines and tools to install, mount, fasten, align and adjust parts, components, wiring and harnesses., • Evaluates assembly procedures and manuals and recommends revisions when required., • Performs such tasks as replacing components and wiring circuits., • Trains new hires and co-workers as necessary to enhance skill level and knowledge base., • Examines and tests assembly at various stages of production to identify errors., • Maintains a record of the assembly process, progress and problems., • Provides feedback to supervisor when a deviation from accepted practice or safety issues are recognized., • Utilizes small hand tools such as wire strippers, crimpers, wrenches, screwdrivers, pliers, and hammers., • Identifies and selects components to be integrated into sub-assembly and assembly units., • Makes own set-ups, alignments and adjustments maintaining tolerance in accordance with instructions., • Disassembles, modifies, reworks, refurbishes, reassembles, and tests instruments as required., • Clean and coat molds for fixtures and product used., • Perform mixing and cooking of gels in a laboratory environment. Other Activities • Evaluates and recommends changes in methods and procedures in assigned area of responsibility., • Performs data entry on work-in-process transaction and parts ordering., • Recommends and implements methods to promote teamwork and maintains a pleasant work environment within department and with other departments., • Trains new team members on how to fill out DHR such as batch record and traveler during the production run., • Seeks constant improvement in work processes and techniques., • Assures that laboratory and assembly areas are in an orderly and functional condition., • Suggests improvement in departmental work processes and procedures., • Maintains good communications with peers, Lead Assembler and Supervisor., • Attends and participates in group meetings, task force groups, etc., as needed., • Works with Support Engineering to develop and maintain time standards., • Aids Support Engineering with design of assemblies and units for manufacturing capability., • Performs other duties and projects as assigned by Supervisor and/or Lead Assembler. Essential Job Requirements Education High school diploma, GED or equivalent education and experience. Experience & Minimum Qualifications • 4-6 years of assembly experience in a fast-paced manufacturing environment, • Ability to follow schematics and assemble wire harnesses is a must., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals, engineering prints and schematics., • Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals using a calculator., • Ability to compute rate, ratio and percent, and to draw and interpret bar graphs., • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists., • Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form., • Ability to use standard power hand tools and custom tools, gauges, and other calibration equipment and assembly fixtures., • Ability to lift 25 to 50 pounds is an asset, • Strong organizational skills through demonstrated ability to multi-task and manage time, • Established collaboration skills and the ability to communicate with openness and transparency., • Ability to comply with FDA Good Manufacturing Practices (GMP)., • Ability to meet production schedules and project deadlines., • Exposure and training to Six Sigma and/or lean manufacturing preferred. Physical Requirements & Working Environment • Ability to work safely and according to departmental procedures when working at high temperatures with hazardous equipment and materials such as oven, mixers, hot plates, ultrasonic cleaner, pressure cooker, fume hood, power tools, wire strippers, heat guns, heated cutting blades and others., • Ability to work safely and according to departmental procedures when handling volatile chemicals which may or may not be hazardous., • Ability to work safely in a chemical laboratory environment., • Ability to occasionally lift and/or move up to 50 lbs., • Ability to successfully respond to multiple work pressures., • Ability to communicate verbally to individuals and groups., • Ability to communicate verbally in person and using a phone., • Ability to listen for understanding and assisting in problem solving., • Ability to regularly use hands to utilize maximum dexterity., • Ability to frequently to walk, stand, sit, and reach with hands and arms., • Ability to occasionally to stoop, kneel, crouch, or crawl and hear., • Specific vision abilities required include close vision, color vision, and ability to adjust focus. "Sakura Finetek USA, Inc. is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law.” The above description identifies the essential job functions and skills needed by the person or persons assigned to this position. These job functions and skills are not intended to be a complete and exhaustive list of all responsibilities, duties and skills required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions. The information contained herein is subject to change at the company's discretion.

Job DescriptionIntellisense Systems, Inc. is a privately held company with a proven track record of developing and deploying innovative products that successfully operate in the most extreme environments. We are a fast-growing Southern California technology innovator that solves tough, mission-critical challenges for our customers in the aerospace, defense, and commercial markets. We design, develop, and manufacture advanced products for ground, maritime, and airborne applications. We are seeking an Electronics Assembler I for our Operations Department. The successful candidate will have electronics and mechanical manufacturing experience and will be proficient in soldering, mechanical assembly, and epoxy potting. The Electronics Assembler I will be responsible for assembly of an advanced electro-mechanical product to AS9100 standards. Responsibilities: • Solder electronic components, • Perform prototype assembly per drawings and specifications, • Perform production assembly, testing, and inspection, • Perform board level programming and testing using automated test fixtures, • Maintain material inventory with proper paperwork and electronic records per established AS9100 procedures, • Perform kitting of production projects, • High School Diploma, • Preferred: Associate degree in Electronics, • 1-3 years in high-tech manufacturing/production environment, • Experience with printed circuit board assembly and testing, electrical harness production, ESD control, and handling optical components are a plus, • Good soldering skills (SMT, through-hole, and harnessing), • Good understanding of soldering work standards (IPC-A-610/J-STD-001), • Understanding of inventory control in an electronics production environment, • Must be capable of following assembly procedures and drawings to perform mechanical system integration, as well as follow test procedures to perform functional testing., • Excellent verbal and written communication skills, • Ability to commit and work under deadlines, • Must be able to work in a challenging and engaging work environment that promotes teamwork, creativity, accountability, and professional development, • The ability to innovate, develop, and transition prototype technologies into new products, and to be rewarded for successful transitions., • The chance to continually work on new differentiating technologies and implement simple elegant solutions to meet customer needs and that make an impact. $24.00-$30.00/hour However, base salary for this position will vary based on your skills, qualifications, and experience. Benefits: • 4 Weeks PTO a year (including 40 hours of PTO your first day), • 10 paid holidays, • 401(k) with 100% employer matching up to 4% of salary (no vesting period), • Multiple options for Medical, Vision, Dental Insurance plans, • Health Savings Accounts, • Flexible Spending Accounts, • Tuition Assistance (30% of Tuition with a minimum qualifying grade), • 100% Paid Employee Assistance Program (EAP), • 100% Paid Basic Life and AD&D Insurance, • 100% Paid Workers Compensation Insurance With an immediate 40-hours of paid time off and 100% 401(k) matching up to 4% of your annual salary without a vesting period, we recognize that employees are our greatest resource and that finding the right individuals will make our company even better. If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please contact us by phone at 424-319-7813 or by email at Unless otherwise stated in the requirements section of an individual job listing, our positions require U.S. Citizenship, U.S. Permanent Residency, or other status as a U.S. Person as defined by 8 USC 1324b(a)(3). Intellisense Systems, Inc is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, veteran status, genetic data, or other legally protected status. OA 26006-A Powered by JazzHR T2A162uubI

Job DescriptionBenefits: • Competitive salary, • Free uniforms This is an entry-level position, and no experience is required! We truly believe in investing in our employees and have created a work culture unlike any other. We also offer huge opportunities for growth. Find out why our culture is at the core of being a Top 100 Culture Award Winner and an official Certified Great Place to Work! Apprentice Gutter Installer Requirements: • A positive attitude is a must, as well as the ability to properly and comfortably interact with clients and other employees., • Two years experience in construction is a plus but not required, • Excellent communication skills, • Ability to work outdoors in all weather conditions/seasons, • Interest in growing with the company, • Willingness to work overtime Hourly Position Apprentice Gutter Installer Requirements: • Must be 18 or older About The Brothers that just do Gutters: The Brothers That Just Do Gutters is a rapidly growing, locally owned, and operated franchise with multiple locations across the country. Our mission is to "Reinvent Contractor Service" by providing a great place to work and delivering 5-star service every step of the way from initial phone inquiry,home visit, inspection and estimate, scheduling, timeliness, installation, follow up and ongoing support and service. We want to do what's right for our employees, customers, and communities.

Quality Inspector II, Dimensional Inspection (First Shift). Conduct thorough inspections of machined components to ensure compliance with engineering specifications and drawing requirements. Document inspection results, identify non-conformities, and write nonconformance reports.

The focus of the supervisor includes managing a remote team of quality inspectors, their inspection scheduling, supplier approval for inspections, and support development to address quality gaps. Spends ~25% of time with suppliers to understand the work environment, and drive process improvements wi

Join our team as a Property Field Inspection Claim Specialist and showcase your expertise in handling accident and weather-related claims for homeowners, commercial properties, and large losses. Conduct on-site inspections and assessments of property damages for both residential and commercial claim

Drive excellence by improving or redefining inspection processes to achieve high reliability. Develop statistical models to guide inspection levels necessary based on product maturity, supplier capability, and other related factors. Experience with IPC inspection standard.