Offres inspector à Little Rock, ArkansasCréer des alertes d'emploi

About the Role \n \n \n JGM is looking for experienced Traveling Journeyman Welders to join our field construction teams on projects across the country. This is a 100% traveling, hands-on structural steel position performing welding, fit-up, and related ironwork on active industrial and commercial construction sites. \n \n \nYou'll work alongside ironworkers, foremen, and field leadership to complete structural steel connections safely, efficiently, and to project specifications. Candidates should be experienced with structural welding in field environments, comfortable working at heights, and able to consistently produce welds that meet inspection requirements. \n \n \nCompensation \n \n\n • Start-$28.00 per hour\n, • Pass D1.1 -$31.00 per hour\n, • Additional based on company evaluation of performance up to $36.00 per hour\n\n \n \nSchedule \n \n\n • 6 days/week - (5) 10-hour shifts, (1) 8-hour shift\n\n \n \nWhat You'll Do \n \n \n\n • Perform structural steel welding on beams, columns, connections, reinforcement, and other structural members in accordance with project specifications and applicable AWS requirements.\n, • Weld in flat, horizontal, vertical, and overhead positions as required.\n, • Perform SMAW (Stick) and FCAW welding commonly used in structural steel erection and field construction.\n, • Read and interpret structural drawings, erection drawings, weld symbols, and connection details.\n, • Fit, tack, and prepare structural members and connections prior to final welding.\n, • Set up and operate welding equipment using the appropriate electrodes, wire, amperage, and settings for the application.\n, • Inspect your own work for weld quality, proper profile, undercut, porosity, and other potential defects before QC inspection.\n, • Complete weld repairs or corrections identified by a CWI or QC inspector.\n, • Pass required welder qualification/WPQ testing for applicable welding processes and positions.\n, • Assist with structural steel erection, bolt-up, connecting, rigging, and other field activities as needed.\n, • Follow all site-specific safety requirements, including fall protection, hot work, fire prevention, and steel erection procedures.\n, • Maintain welding equipment, leads, tools, and PPE in safe working condition.\n, • Travel between JGM project sites as assignments and project schedules require.\n\n \n \nWhat You Bring \n \n\n • Minimum 5 years of structural steel welding experience , preferably in field construction or steel erection.\n, • Demonstrated ability to produce quality structural welds in multiple positions.\n, • Experience with SMAW and/or FCAW welding processes.\n, • AWS D1.1 structural welding experience strongly preferred.\n, • Ability to read structural drawings, weld symbols, and connection details.\n, • Ability and willingness to pass JGM and/or project-specific weld tests prior to beginning work.\n, • Experience working around structural steel erection, cranes, rigging operations, and active construction equipment.\n, • Comfortable working at heights and using required fall-protection systems.\n, • Ability to safely perform physically demanding work for extended shifts.\n, • Willing and able to travel 100% , including extended assignments away from home and movement between projects as needed.\n, • Valid driver's license and reliable transportation.\n, • Ability to pass required background screening and drug testing.\n, • Dependable, safety-focused, and able to work effectively with limited supervision.\n\n \n \nPhysical Requirements & Work Environment \n \n\n • Work may be performed in both indoor and outdoor construction environments , depending on the project.\n, • Regularly required to climb, balance, bend, stoop, kneel, crouch, and work at elevated heights.\n, • Ability to lift and carry up to 50 lbs. , including welding equipment, leads, tools, and materials.\n, • Ability to remain on your feet and perform physically demanding work for extended periods, including 10-12 hour shifts when required.\n, • Must wear all required PPE, including welding hood, flame-resistant clothing, safety-toed boots, gloves, hearing protection, hard hat, safety glasses, and fall-protection equipment.\n, • Regular exposure to welding fumes, sparks, heat, noise, moving equipment, and other conditions typical of active structural steel construction sites.\n, • Vision must be sufficient, with or without correction, to evaluate fit-up, joint alignment, and weld quality.\n\n \n \nWhy JGM \n \n \n JGM is an AISC-certified structural steel fabricator and industrial construction company with deep Pennsylvania roots and projects throughout the country. Our field teams perform challenging structural steel and industrial construction work for some of the nation's leading companies. \n \n \n This role offers the opportunity to work on long-term projects, build your field experience, and continue traveling with JGM as projects move across the country. \n \n \nWhat We Offer \n \n\n • Competitive pay based on experience and qualifications\n, • Per diem for qualifying traveling assignments\n, • Travel assistance/reimbursement in accordance with project requirements\n, • Consistent opportunities across JGM field projects\n, • Training and support toward OSHA and project-specific safety certifications\n, • Long-term opportunities for skilled welders who want to grow with JGM\n

Job Description Job Summary The Receiving Inspector (RI) inspects components, materials, and products then receives them into the Repair Station Quality System. The RI verifies parts and components are in compliance to purchase order, repair order, and work order requirements including Certification documents. Job Duties & Responsibilities · Accomplishes all work while following company and industry safety standards while maintaining the highest level of quality. · Adheres to all FAA Regulations, the Repair Station Quality Control Manual (RSQCM), and all other approved data. · Perform shipping/receiving inspections in compliance with company Quality Manuals and Procedures, as well as, governmental regulatory procedures and specifications. · Maintains quarantine area · Brings suspected unapproved parts to the attention of the Quality Assurance Manager · Mutilates scrap material and maintains log per Repair Station Quality Control Manual. · Use electrostatic protection type equipment. · Prepare necessary customer and/or company documents. · Complete and maintain reports and records as required. · Contributes to a positive work environment while maintaining the utmost level of professionalism at all times. · Able and willing to mentor others. · Works assigned shift and unscheduled overtime as-needed or requested. · Maintains a clean and organized work area at all times and adheres to company dress standards. · Perform all other duties as assigned to support the efficient operation of the department and company. Qualifications · High school graduate or equivalent with additional courses in aircraft maintenance in recognized service or technical school programs. · 2+ years of experience in aviation or equivalent preferred. · Be familiar with relative FAA/EASA regulations and requirements. · Must have working knowledge of Quality Inspection processes and procedures. · Intermediate computer skills. · Previous FAA Repairman’s Certificate preferred. · Previous Quality Control experience preferred. · Corridor software experience preferred Compensation and Benefits: The compensation for this position typically falls between $18 and $26 per hour. This position is eligible for overtime and will receive a 12% shift differential. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest, and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description About the Role JGM is looking for experienced Traveling Journeyman Welders to join our field construction teams on projects across the country. This is a 100% traveling, hands-on structural steel position performing welding, fit-up, and related ironwork on active industrial and commercial construction sites. You’ll work alongside ironworkers, foremen, and field leadership to complete structural steel connections safely, efficiently, and to project specifications. Candidates should be experienced with structural welding in field environments, comfortable working at heights, and able to consistently produce welds that meet inspection requirements. What You’ll Do • Perform structural steel welding on beams, columns, connections, reinforcement, and other structural members in accordance with project specifications and applicable AWS requirements., • Weld in flat, horizontal, vertical, and overhead positions as required., • Perform SMAW (Stick) and FCAW welding commonly used in structural steel erection and field construction., • Read and interpret structural drawings, erection drawings, weld symbols, and connection details., • Fit, tack, and prepare structural members and connections prior to final welding., • Set up and operate welding equipment using the appropriate electrodes, wire, amperage, and settings for the application., • Inspect your own work for weld quality, proper profile, undercut, porosity, and other potential defects before QC inspection., • Complete weld repairs or corrections identified by a CWI or QC inspector., • Pass required welder qualification/WPQ testing for applicable welding processes and positions., • Assist with structural steel erection, bolt-up, connecting, rigging, and other field activities as needed., • Follow all site-specific safety requirements, including fall protection, hot work, fire prevention, and steel erection procedures., • Maintain welding equipment, leads, tools, and PPE in safe working condition., • Travel between JGM project sites as assignments and project schedules require. What You Bring • Minimum 3 years of structural steel welding experience, preferably in field construction or steel erection., • Demonstrated ability to produce quality structural welds in multiple positions., • Experience with SMAW and/or FCAW welding processes., • AWS D1.1 structural welding experience strongly preferred., • Ability to read structural drawings, weld symbols, and connection details., • Ability and willingness to pass JGM and/or project-specific weld tests prior to beginning work., • Experience working around structural steel erection, cranes, rigging operations, and active construction equipment., • Comfortable working at heights and using required fall-protection systems., • Ability to safely perform physically demanding work for extended shifts., • Willing and able to travel 100%, including extended assignments away from home and movement between projects as needed., • Valid driver’s license and reliable transportation., • Ability to pass required background screening and drug testing., • Dependable, safety-focused, and able to work effectively with limited supervision. Physical Requirements & Work Environment • Work may be performed in both indoor and outdoor construction environments, depending on the project., • Regularly required to climb, balance, bend, stoop, kneel, crouch, and work at elevated heights., • Ability to lift and carry up to 50 lbs., including welding equipment, leads, tools, and materials., • Ability to remain on your feet and perform physically demanding work for extended periods, including 10–12 hour shifts when required., • Must wear all required PPE, including welding hood, flame-resistant clothing, safety-toed boots, gloves, hearing protection, hard hat, safety glasses, and fall-protection equipment., • Regular exposure to welding fumes, sparks, heat, noise, moving equipment, and other conditions typical of active structural steel construction sites., • Vision must be sufficient, with or without correction, to evaluate fit-up, joint alignment, and weld quality. Why JGM JGM is an AISC-certified structural steel fabricator and industrial construction company with deep Pennsylvania roots and projects throughout the country. Our field teams perform challenging structural steel and industrial construction work for some of the nation’s leading companies. This role offers the opportunity to work on long-term projects, build your field experience, and continue traveling with JGM as projects move across the country. What We Offer • Competitive pay based on experience and qualifications, • Per diem for qualifying traveling assignments, • Travel assistance/reimbursement in accordance with project requirements, • Consistent opportunities across JGM field projects, • Training and support toward OSHA and project-specific safety certifications, • Long-term opportunities for skilled welders who want to grow with JGM

Job Description Are we the road to your future? We are currently searching for an experienced Senior CEI Inspector to support our Gulf Region located in East Arkansas To be considered for this position, applicants must have, at minimum, 8 years of inspection experience. What you’ll be doing: • Inspection for compliance with contract documents, standards, and specifications, • Testing of materials; review of plans; analysis of engineering-related data; and construction survey/layout, • Keeping daily diaries on project operations, resolves daily constructability issues and trouble shoots problems to mitigate delays to contractor’s progress, • Monitors contractor's daily operations and performs and/or reviews test reports to ensure that all work and materials conform to specifications, plans and contractual provisions. Also monitors utility relocation efforts by inspecting and tracking relocation work • Documenting pay records, performing construction calculation, and computer/iPad entry, • Anticipates contractual problems and advises supervisor of the need for plan revisions, supplemental agreements, or other contract adjustments to improve safety, timely delivery and/or quality of delivered product • Ensures compliance with AR EPSC standards, and that all work performed in permitted areas, is done in accordance with the permits, • Effectively communicates and coordinates work with contractors, subcontractors, utility owners, and property owners to minimize delays and disturbances while maximizing progress of the projects • Perform acceptance testing of materials in a laboratory environment and inputs test results into various computer data bases What you need to have: • High School Diploma or equivalent, • 8 + years of progressive inspection level experience or equivalent combination of education and experience, • Must be able to perform moderate physical activity including but not limited to walking, climbing, balancing, kneeling, and standing, • Must be able to lift 70 lbs., • Must be able to work nights and weekends as required, • Must apply safety philosophy and program to all operations, • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines, • Valid driver’s license and a satisfactory motor vehicle report (MVR) Bonus points if you have: • Have excellent communication skills Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match, • Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. #LI-DNI AR Arkansas

Job DescriptionDescription: Job Overview: We are seeking a skilled and experienced Aircraft A&P Mechanic to join our maintenance team, focusing on our flight school. The successful candidate will be responsible for performing maintenance, inspections, and repairs on various aircraft to ensure they comply with all safety and regulatory requirements. This position will also involve providing leadership in inspection duties, including airframe, engine, and avionics checks, and overseeing the work of other mechanics as required. Key Responsibilities: • Perform routine and scheduled maintenance, repairs, and inspections on aircraft, including airframe, engines, and components, ensuring compliance with FAA regulations and manufacturer specifications., • Conduct inspections as an authorized inspector (IA), approving major repairs, alterations, and annual inspections., • Troubleshoot and resolve mechanical, electrical, and avionics issues, utilizing appropriate diagnostic tools and procedures., • Maintain accurate maintenance records, including log entries and required paperwork for FAA compliance., • Ensure that all work meets FAA regulations, company policies, and safety standards., • Lead or assist in the disassembly, inspection, repair, and reassembly of aircraft systems and components., • Provide guidance and mentorship to junior mechanics and technicians, ensuring quality and safety standards are maintained., • Ensure all tools, equipment, and parts used in maintenance activities are properly maintained and accounted for., • Assist with managing inventory, ordering parts, and coordinating with the supply chain for materials as needed., • Stay current with FAA regulations, industry best practices, and aircraft technical manuals., • Collaborate with the operations team to minimize downtime and ensure timely completion of maintenance tasks. Qualifications: • Valid FAA Airframe and Powerplant (A&P) certification., • Proficient in reading and interpreting technical manuals, blueprints, and schematics., • Strong knowledge of FAA regulations (14 CFR Part 43, 145, etc.), maintenance procedures, and safety protocols., • Experience working with Tecnam and Cessna aircraft., • Familiarity with avionics systems and equipment is a plus., • Excellent attention to detail and problem-solving skills., • Strong communication and interpersonal skills., • Ability to work independently and as part of a team in a fast-paced, high-pressure environment., • Ability to lift and carry heavy items and work in confined spaces. Physical Requirements: • Ability to lift up to 50 pounds., • Ability to work in various weather conditions and at heights., • Ability to stand, kneel, and crouch for extended periods. Benefits: • Competitive salary based on experience, • Health, dental, and vision insurance paid by employer, • 401(k), • Paid time off (PTO) and holidays, • Opportunities for ongoing training and career development If you're a skilled Aircraft A&P Mechanic with an IA looking for an exciting opportunity to make a significant impact, we encourage you to apply and join our dedicated team. Requirements: REQUIREMENTS Education • Required: High School Diploma or equivalent Licensing/Registration/Certification • Required: Airframe and Power plant Certificate, • Valid Driver’s License, • Current Inspection Authorization Certificate preferred but not required Experience • Required: One – 3 years maintaining General Aviation Aircraft. Skill, Knowledge, and Abilities Language Skills: • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively to the customers or employees of organization Physical • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations., • While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee is occasionally required to sit. The employee must regularly lift and/or move up to 80 pounds., • A typical workweek consists of 8 hours per day, 40 hours per week, with some overtime required. These are the requirements with or without a reasonable accommodation. Mental • Must be able to read, understand and interpret instructions and information at the high school level.

Job Description Gas/Utility Inspectors will oversee QA/QC of Construction Contractors that are installing new facilities and replacement of existing infrastructure that includes gas mains, services, metering stations, and regulator stations, high pressure distribution lines, including fusion of poly lines. Candidates must have experience with poly pipe, leak repairs and distribution. Applicants must be local to the Central Arkansas Region - preferably Little Rock or Pine Bluff. This is the approximate location where the work will take place. No Per Diem available at this time.

Job Description D7 Pneumatics LLC is seeking an experienced QA/QC Manager to support our fabrication shop and field operations based in Jonesboro, Arkansas. This position will begin on a part-time or as-needed basis, with the potential to develop into a full-time role based on workload and company growth. The QA/QC Manager will be responsible for implementing and maintaining D7’s Quality Control Program, supporting ASME and National Board Code work, and ensuring fabrication and field activities comply with approved procedures, project specifications and applicable codes. Key Responsibilities Administer and enforce the D7 Quality Control Manual and related procedures. Oversee quality activities for shop fabrication and field installations. Review contracts, drawings, specifications and project requirements before work begins. Confirm the applicable codes, standards, inspection requirements and testing procedures for each project. Maintain compliance with applicable ASME, National Board and pressure-piping requirements. Coordinate with Authorized Inspectors, client representatives, engineers and third-party inspection agencies. Verify that approved Welding Procedure Specifications are available and properly followed. Review and maintain WPS, PQR and Welder Performance Qualification records. Monitor welder qualifications and continuity. Verify material receiving, identification, storage and traceability. Review Material Test Reports and certificates of compliance. Maintain weld maps, weld logs, inspection reports and project turnover documentation. Establish and monitor inspection hold points. Perform or coordinate fit-up, visual welding and final inspections. Coordinate nondestructive examination, including RT, UT, MT and PT, when required. Ensure pressure testing is performed using approved procedures, calibrated equipment and proper safety controls. Monitor preheat, interpass temperature and postweld heat treatment when applicable. Manage nonconformance reports, corrective actions and weld-repair documentation. Maintain calibration records for inspection and testing equipment. Control Code stamps, data reports and quality records as assigned. Assist with ASME, National Board, Authorized Inspection Agency and client audits. Conduct internal quality audits and recommend improvements. Prepare complete and organized project turnover packages. Train supervisors, welders, fitters and shop personnel on applicable quality requirements. Maintain a professional, practical and safety-focused quality culture. Required Qualifications Previous QA/QC experience in industrial fabrication, pressure piping, power-generation, boiler or pressure-vessel work. Working knowledge of welding inspection and fabrication quality-control methods. Ability to read fabrication drawings, piping isometrics, P&IDs, weld maps and technical specifications. Knowledge of welding procedures, welder qualifications and material traceability. Experience administering inspection, examination and pressure-testing requirements. Strong documentation, organization and communication skills. Ability to work independently and coordinate effectively with project managers, supervisors, inspectors and clients. Proficiency with Microsoft Word, Excel, email and electronic recordkeeping. Willingness to support both Jonesboro shop operations and field projects as required. Preferred Qualifications Knowledge of ASME BPVC Sections I, II, V, VIII and IX. Knowledge of ASME B31.1 Power Piping and ASME B31.3 Process Piping. Experience with National Board Inspection Code repair and alteration requirements. Experience working under ASME U and S Certificates and a National Board R Certificate. AWS Certified Welding Inspector certification. ASNT or employer-based NDE qualifications. Experience dealing with Authorized Inspectors and jurisdictional authorities. Experience in power plants, pulp and paper facilities, steel mills, sawmills or other heavy-industrial facilities. Employment Structure This position is intended to begin as part-time or as-needed employment. Hours may increase based on active projects, shop workload and field requirements. The position has the potential to transition into a full-time QA/QC management role as D7’s Code fabrication and pressure-piping operations expand s.

Job DescriptionFire Sprinkler Inspector Location: Central Arkansas (Little Rock and surrounding areas) Division: Fire Protection Company: State Systems, Inc. About State Systems, Inc. Founded in Memphis, TN, State Systems, Inc. is a total protection company providing fire protection, low voltage systems, and life-safety solutions across Tennessee, Arkansas, Mississippi, and Alabama. Our mission is simple: to protect life and property every day through integrity, innovation, and superior customer service. We’re seeking a skilled and detail-oriented Fire Sprinkler Inspector to join our growing Central Arkansas team. This role ensures the safety and reliability of fire protection systems through thorough inspections, testing, and clear documentation—all while maintaining compliance with NFPA standards and company procedures. What You’ll Do Perform scheduled field inspections of fire sprinkler and fire suppression systems. Inspect wet, dry, pre-action, deluge, and foam systems for compliance and functionality. Trip, observe, and reset dry valves; record pressures and note deficiencies. Execute water flow tests and main drain tests on all risers. Exercise, lubricate, and maintain fire sprinkler valves. Verify monitoring station communication on supervised systems. Complete system tests to ensure devices operate properly. Finalize and submit inspection reports; discuss deficiencies and resolutions with customers. Ensure all work meets NFPA, AHJ, and company standards. Collaborate within a team of inspectors to troubleshoot, problem-solve, and learn. Operate mobile devices (tablet/PDA) to record inspection data and generate reports. Communicate effectively with customers and team members. Maintain punctuality, professionalism, and safety standards. What We’re Looking For High school diploma or GED required. NICET Level I certification in Inspection and Testing of Water-Based Systems or 2+ years equivalent experience. Valid driver’s license and clean driving record. Strong verbal and written communication skills. Ability to read and interpret construction documents and specifications. Basic proficiency with Microsoft Office (Word, Excel, Outlook). Knowledge of NFPA standards and fire sprinkler inspection procedures. Ability to inspect and test fire pumps (diesel and electric). Experience inspecting foam systems preferred. Preferred Qualifications: Backflow certification. 3–5 years of fire sprinkler experience. Physical Requirements Lift and carry a minimum of 40 lbs. regularly, up to 100 lbs. occasionally. Push and pull objects greater than 40 lbs. as needed. Safely climb ladders and reach heights of at least 24 ft. Frequent walking, standing, climbing, and manual dexterity required. Comfortable working at elevated heights (>26 ft.) and in various weather conditions. What We Offer At State Systems, we reward performance and support your professional growth in a collaborative, safety-driven culture. Benefits include: Competitive pay based on experience and certifications 401(k) with company match Health, dental, and vision insurance Life, accident, and critical illness coverage Paid time off and holiday pay Company vehicle or allowance, phone allowance, and logo attire Flexible Spending & Health Savings Accounts Employee assistance & wellness programs Opportunities for advancement and professional development Referral program and retirement plan Pet insurance and other voluntary benefits Schedule: Full-time | Monday–Friday Payment Frequency: Biweekly Company Overview State Systems, Inc. is a privately owned total protection company headquartered in Memphis, TN. With divisions in Fire Protection, Cleaning Services, Technology, and Low Voltage, we provide comprehensive life-safety and facility protection solutions. Our certified technicians deliver quality, compliant systems designed to protect lives and property. Learn more at www.statesystemsinc.com. Join a Leader in Life Safety If you’re ready to grow your career in fire protection, apply today to join State Systems, Inc.—a company built on trust, excellence, and protecting what matters most. Texting Privacy Policy and Information: Message type: Informational; you will receive text messages regarding your application and potentially regarding interview scheduling. Message frequency will vary depending on the application process. Msg & data rates may apply. OPT out at any time by texting “Stop.” Pre-Employment Screening: All employment offers are contingent upon successful completion of a background check and drug screening, in accordance with applicable laws and company policy. SSI Fire & Safety is an Equal Opportunity Employer committed to diversity and inclusion. Powered by JazzHR xYOlpm10UZ

Job Description Industrial Inspection & Analysis is searching for an ANSI Inspector to join our Lifting Services team in Texas or Arkansas. Position Overview The ANSI Inspector will perform inspections on aerial lifts, bucket trucks, cranes and digger derricks. ANSI inspections ensure that they are in safe working order by conducting a review of the major components. Responsibilities Perform structural tests including: • Acoustic emission tests to assess the integrity of the fiberglass and steel structure, • Magnetic particle inspections to identify surface cracks on ferrous metals, • Torque test all critical fasteners, among others., • Dielectric testing to verify the electrical insulating strength in the FRP upper and lower booms, bucket, liners, FRP extensions on digger derricks, tool circuits, and upper control system. Qualifications • Mechanically inclined., • Basic knowledge of mechanical processes, movement, and assembly., • Basic knowledge of hand tools., • Proficient computer skills., • Strong communication skills., • Adequate visual acuity and perception to identify and distinguish light, color, depth, distance, and other elements pertaining to spatial resolution., • Must be able to work independently with some direction from management., • Problem solver, detail oriented. Job Requirements • Able to stand, sit, squat, climb, crawl and twist for extended periods of time., • Ability to lift up to 50 pounds., • Must be punctual, accountable, and provide high quality customer service., • Must be able to travel for an extended period of time and available to work varying shifts which may include weekends, overnights and holidays., • Must have valid driver’s license and be able to pass a background check and drug screen. Benefits • Medical (w/Mental Health coverage), Dental, Vision insurance, • Voluntary Short-Term Disability, Critical Illness, and Accident plans, • Employer-paid Life Insurance and Long-Term Disability, • Employee Assistance Program (EAP), • 401(k) Retirement Plan, • Paid Time Off and Holidays, • Monthly cell phone reimbursement About Us Industrial Inspection & Analysis®️ (IIA) is an emerging, high growth inspection, testing, and analytical business seeking to build a national platform to serve a breadth of industrial sectors and geographies. We pledge to provide Story-Worthy Service and Solutions, through even the most challenging situations. Making the World Safer is our mission at IIA. We are committed to operating in an environmentally and socially responsible manner and to helping our customers do so as well. Across every industry we serve, we offer inspection and engineering services that promote safety, efficiency and compliance with all applicable regulations. Industrial Inspection & Analysis provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, amnesty or status as a covered veteran in accordance with applicable federal, state and local laws. IIA complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including, without limitation, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description Job Summary Perform major inspections of the aircraft. Inspect modifications, alterations and repairs to the aircraft, components, major assemblies or sub-assemblies to applicable approved data and document their findings in accordance with FAA and company procedures. Make appropriate log book entries to document work performed by the repair station in accordance with FAA regulations. Interface with the maintenance floor supervisor, customer and FAA as required to accomplish their duties in a professional manner. Ensure safety of the product being serviced and the documentation of the maintenance being performed by the repair station. Job Duties & Responsibilities Accomplishes all work while following company and industry safety standards while maintaining the highest level of quality. Adheres to all FAA Regulations, the Repair Station Quality Control Manual (RSQCM), and all other approved data. Perform to company standards, work instructions, and perform necessary calculations using shop math to conform tooling, detailed parts, assemblies and installations. Performs complete inspection of components and production tools to determine safety or conformance to standards and requirements. Use precision measuring guides, gauges and laboratory instruments. Is familiar with FAR Part 145, 135, 91, 65, 21 and related A/C’s rev. 1 Complete and maintain other reports and records as required. Accurately log computerized labor data collection for time and attendance tracking. Follows specific authorizations as listed on Inspection Authorization Letter. Contributes to a positive work environment while maintaining the utmost level of professionalism at all times. Able and willing to mentor others. Able to communicate technical information clearly to supervisory personnel, flight crews and customers. Works assigned shift and unscheduled overtime as-needed or requested. Ability to travel and perform AOG maintenance. Occasionally communicates directly with customers and vendors. Maintains a clean and organized work area at all times and adheres to company dress standards. Perform all other duties as assigned to support the efficient operation of the department and company Shift Friday- Sunday 7am-7:30pm Qualifications High school graduate or equivalent with additional courses in aircraft maintenance in recognized service or technical school programs. 3+ years aircraft related experience required 2+ years aircraft inspection experience preferred FAA Airframe and Powerplant Certificate required Good knowledge of FAA regulations as pertaining to aircraft maintenance. Must have required tools. Intermediate computer skills preferred. Turbine jet aircraft training and experience – Dassault Falcon Models preferred. FAA Inspection Authorization certification preferred Working Conditions Works in a climate controlled hangars. (Heated and Cooled) Occasionally works outside on tarmac in atmospheric weather conditions. Physical Requirements Ability to wear and utilize personal protective equipment Must be able to lift up to 50 pounds without assistance Must be able to lift and carry up to 100 pounds with assistance Comfortable in tightly enclosed areas, heights involving lifts and ladders, as well as, flying. Requires the ability to perform all physical functions of the job (hear, stand, kneel, walk, etc.) Compensation and Benefits: The compensation for this position typically falls between $43 and $47 per hour. This position is eligible for tech leveling to reflect varying levels of experience. This position is eligible for overtime and may be eligible for shift differential or relocation assistance. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest, and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description Responsible for performing inspections of aircraft maintenance and alterations for quality and airworthiness. The Quality Control Inspector may also perform aircraft maintenance (including inspection), preventive maintenance and alteration and assist customers with technical and operational support relative to the customer’s aircraft. DUTIES AND RESPONSIBILITES • Responsible for Quality Assurance for quality and airworthiness and may report to Maintenance Supervision for the assignment of aircraft maintenance tasks., • Using technical data acceptable to and/or approved by the FAA, the Quality Control Inspector provides inspection and approval for return to service with respect to work performed., • Adheres to general work and safety requirements., • May travel to locations other than the Repair Station’s fixed location to support customer aircraft., • May perform inspections, adjusts and repairs, replace components and corrects any malfunction or deficiency with and without power applied to the aircraft., • May perform repairs on components removed from the aircraft., • May remove and re-install aircraft components to gain access for the performance of assigned tasks., • May troubleshoot (fault isolation) aircraft system malfunction., • May perform basic mechanical and electrical removals and installations., • Documents, records, and signs for work performed and/or inspected per RSM/QCM., • Perform other related tasks as assigned by supervision., • May fuel and defuel aircraft., • May perform aircraft line services., • Performs inspection on-site and at off-site locations., • Supports production aircraft under Production Certificate System., • Assists other employees in the performance of their duties within area(s) of qualification., • Is familiar with and adheres to the RSM/QCM and applicable regulations., • Is responsible for and accountable for work performed. QUALIFICATIONS • Possess a Mechanics certificate with Airframe and Power plant ratings., • Minimum 5 years’ experience in aircraft maintenance and alteration of turbo fan powered business aircraft., • Trained in or experience with the methods, techniques, practices, aids, equipment, and tools used to perform aircraft maintenance and alterations., • Minimum 5 years' experience working on our Falcon models., • Thoroughly familiar with the applicable regulations, the RSM/QCM and proficient in the use of the various inspection methods, techniques, practices, aids, equipment, and tools appropriate for the work being performed and approved for return to service., • Able to work unsupervised for extended periods., • Excellent written and verbal communications skills., • Can Do attitude – highly motivated,, • Demonstrate excellent customer service skills., • Team player that exhibits and models Dassault Falcon Jet core values and attributes., • Repair Station Training, • Applicable Airframe Initial Training, • Applicable Engine Training, • Applicable Avionics Systems Training, • RVSM Training, • FAR 91.411/FAR 91.413 Training, • Human Factors Training, • Performs duties as assigned.Compensation and Benefits: The compensation for this position typically falls between $36 and $47 per hour. This position is eligible for tech leveling to reflect varying levels of experience. This position is eligible for overtime and may be eligible for shift differential or relocation assistance. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest, and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

About the Role \n \n \n JGM is looking for an experienced, AWS-Certified Welding Inspector to join our Quality team as a Traveling CWI. This is a 100% field-based, traveling role - you'll be on the road and on active erection sites across the country, testing welders, inspecting structural steel welds, and making sure the paperwork behind every joint holds up to code. You'll work directly with erectors, welders, project engineers, and outside inspection agencies at each site to keep quality on track from first pass to final sign-off, then move on to the next project. \n \n \nWhat You'll Do \n \n\n • Perform visual and dimensional weld inspections on structural steel members in accordance with AWS D1.1, AISC 360, and applicable project specifications.\n, • Conduct welder performance qualification (WPQ) testing and verify Welding Procedure Specifications (WPS) and Procedure Qualification Records (PQR) are current and being followed correctly.\n, • Test and requalify welders as needed, and maintain accurate, up-to-date qualification records for all welding personnel.\n, • Review erection drawings, weld maps, and specifications to confirm welds and fit-up meet design intent during field erection.\n, • Coordinate visual inspection and review resulting reports for completeness and accuracy, as well as third party UT inspections as needed.\n, • Document all inspections, non-conformances, and corrective actions clearly and thoroughly - inspection reports, weld logs, NCRs, and daily QC reports that hold up to client and AHJ scrutiny.\n, • Assemble and maintain quality documentation packages (mill certs, WPS/PQR/WPQ records, NDE reports, inspection reports) for project turnover and client submittal.\n, • Serve as the on-site point of contact for third-party inspectors, AHJs, and client quality representatives; help resolve field and shop welding issues in real time.\n, • Flag discrepancies between project specifications and code minimums, and loop in the Director of Quality on anything outside your authority to resolve.\n, • Support root cause analysis and corrective action reporting when quality issues come up.\n, • Travel continuously between active job sites nationwide as project schedules require, often on short notice and for extended durations.\n\n \n \nWhat You Bring \n \n\n • Current AWS Certified Welding Inspector (CWI) certification - required.\n, • Minimum of 3-5 years of hands-on weld inspection experience in structural steel fabrication and/or erection.\n, • Solid working knowledge of AWS D1.1 Structural Welding Code and AISC fabrication/erection standards; familiarity with ASTM material specifications.\n, • Experience testing and qualifying welders, and reviewing/verifying WPS, PQR, and WPQ documentation.\n, • Comfortable reading structural drawings, weld symbols, and connection details, and catching discrepancies before they become field problems.\n, • Strong written communication - your inspection reports and NCRs need to be clear enough that anyone downstream understands the issue and the fix.\n, • Proficient with Microsoft Office (Word, Excel, Outlook); comfortable picking up project documentation or QC tracking software.\n, • Willing and able to travel 100% of the time, including extended overnight and multi-week assignments away from home, with a valid driver's license.\n, • Able to pass a background check and drug screen; JGM is a drug-free workplace.\n, • Additional certifications a plus: ASNT Level II (UT/MT/PT), AISC/IAS fabricator inspection experience.\n\n \n \nPhysical Requirements & Work Environment \n \n\n • Regularly works outdoors on active construction/erection sites, in varying weather and temperatures, at a different site or region as assignments rotate.\n, • Ability to climb, balance, stoop, kneel, crouch, and work at heights while following all fall-protection and site safety requirements.\n, • Ability to lift and carry up to 50 lbs. and remain on your feet for extended periods.\n, • Required to wear all applicable PPE (safety-toed footwear, gloves, safety glasses, hearing protection, hard hat, high-visibility vest, etc.).\n, • Good vision (corrected or uncorrected) sufficient to detect weld defects, read gauges, and interpret drawings; ability to work in areas with dirt, dust, fumes, and noise typical of a fab shop or job site.\n\n \n \nWhy JGM \n \n \n JGM is an AISC-certified structural steel fabricator and industrial construction company with deep Pennsylvania roots and a national field footprint. We take pride in the work that leaves our shops and the crews who put it in place - this role sits right at the center of that, making sure every weld we sign off on is one we'd stand behind. \n \n\n • Competitive pay, commensurate with experience\n, • Medical, dental, and vision coverage\n, • Paid time off and holidays\n, • Travel and per diem covered per company policy - this is a fully field-based traveling role\n, • Training and support toward continuing certifications\n

Five (5) or more years of construction observation or construction inspection experience on aviation-related projects. Olsson Construction Administration PositionOlsson provides construction management, administration, and observation services for aviation projects to assure that work is performed i

The Calling Somewhere tonight, a cold start is creeping through a production function. A memory leak is feeding on a container that nobody has looked at in months. A long-lived credential sits in a forgotten config file, waiting. Safience builds identity intelligence for the people who find missing children and stop real threats. When an investigator needs an answer, our systems cannot go dark. So we need an engineer who stands the watch. You will design, build, and operate Node.js services on AWS Lambda and Docker-based containers. Fastify is your blade. Vue.js is your shield. Terraform is your book of wards. You own services end to end: the code, the infrastructure, the pipelines, the lanterns that light every corridor, and the 3 a.m. page when something stirs. You set the direction for serverless and containerized workloads across a multi-account AWS realm, and you make every engineer around you sharper through review, documentation, and mentorship. Sacred DutiesForging the Weapons (Application Development) • Forge production Node.js services in TypeScript with Fastify and Vue.js, deployed as Lambda functions (zip and container-image packaging) and as containers on ECS/Fargate., • Raise event-driven defenses with API Gateway, SQS, SNS, EventBridge, Step Functions, and DynamoDB/Kinesis streams. Messages move like sentries passing the watchword., • Write idempotent, retry-safe handlers. A message that returns from the dead should find nothing to repeat. You decide what happens in the dead-letter queue, and you report partial batch failures honestly., • Banish the cold start. Shrink bundles, tune memory and timeouts, and set concurrency and provisioned concurrency so performance and cost both stay in the light.Raising the Walls (Infrastructure & Containers), • Inscribe the wards in Terraform: remote state, modular design, and no change goes live without a second pair of eyes., • Build lean, hardened Docker images with multi-stage builds, pinned base images, deterministic installs, and non-root users. Nothing runs as root in this house., • Tend the image crypt in Amazon ECR: tagging strategy, vulnerability scanning, and retention policies. Old images are laid to rest on schedule., • Patrol multiple AWS accounts with cross-account IAM roles and least-privilege policies. No spirit gets a skeleton key.Sealing the Gates (CI/CD & Release Engineering), • Own GitHub Actions pipelines for build, test, scan, and deploy, using OIDC federation to AWS. Long-lived credentials are how the darkness gets in., • Deploy with discipline: Lambda aliases and versions with weighted traffic shifting, ECS rolling or blue/green deployments, and automated rollback on alarm. When the bell rings, we retreat in good order., • Guard the supply lines with lockfiles, private package registries, and automated vulnerability and license scanning. Nothing enters the camp unexamined.Keeping Watch (Observability & Operations), • Instrument everything with structured logging, metrics, and distributed tracing (CloudWatch and/or OpenTelemetry). Shadows hide where logs are missing., • Define SLOs, alarms, and dashboards. Take your turn on the on-call rotation, lead incident response, and run blameless postmortems. We hunt the cause, never the person., • Watch the AWS bill for the services you own. Waste is a slow haunting.Wards and Seals (Security), • Keep secrets in AWS Secrets Manager and SSM Parameter Store, encrypted with KMS. Secrets are never spoken aloud or written in plain text., • Secure the network paths for VPC-attached Lambdas and Fargate tasks: subnets, security groups, VPC endpoints, and NAT trade-offs., • Join security reviews and threat modeling, and close out findings. Name the threat before it names you.Leading the Order (Leadership), • Lead technical design for new services and write design docs that face the hard choices squarely (Lambda vs. Fargate, sync vs. async)., • Review code thoroughly and train the mid-level and junior engineers who will stand the watch after you., • Keep the scrolls current: runbooks, architecture diagrams, and onboarding docs.Proof of Battle (Required Qualifications) Years in the field. 6+ years of professional software development. 4+ building and operating production Node.js services. 3+ running production workloads on AWS Lambda and ECS/Fargate. You’ve carried a service from first sketch to launch to the night it tried to fall over, and you were the one who picked up the phone. Your arsenal. • Node.js / TypeScript: You know the event loop the way a sailor knows the tide. Async patterns, streams, memory behavior, CommonJS and ESM, and typing that actually protects you., • Fastify: Designing, building, and migrating APIs onto it., • Vue.js: Designing, building, and migrating UIs with it., • AWS Lambda: Handler lifecycle, execution environment reuse, the concurrency model, event source mappings, layers, container-image functions, and runtime upgrades before they become emergencies., • AWS core services: IAM, API Gateway, SQS, SNS, EventBridge, Step Functions, DynamoDB, S3, CloudWatch, ECR, ECS/Fargate, and VPC fundamentals., • AWS SDK for JavaScript v3: Modular clients, middleware, pagination, and retry configuration., • Docker: Multi-stage builds, layer caching, image hardening, and debugging containers both locally and in production., • Terraform: Real production use, including state management, modules, and workspaces or per-environment layouts., • CI/CD: GitHub Actions or something comparable, with environment promotion and automated testing gates., • Testing: Unit, integration, and contract tests (Jest, Vitest, or ava), plus local Lambda emulation with SAM CLI or LocalStack., • Datastores: Working proficiency with MongoDB or DocumentDB, and ElasticSearch or OpenSearch.Honors of Distinction (Preferred Qualifications), • AWS Certified Developer Associate, Solutions Architect Associate or Professional, or DevOps Engineer Professional., • Experience with AWS Organizations and multi-account landing zones., • Identity-aware proxies or zero-trust access (Pomerium or equivalent). Trust nothing at the door., • OpenTelemetry across both Lambda and container workloads., • Container supply-chain tooling: SBOM generation, image signing, Trivy, Grype, or Amazon Inspector., • Migrating workloads between Lambda and containers, or dragging legacy hosts into the serverless age., • Time in regulated or security-sensitive environments such as SOC 2, PCI, or gaming and casino compliance., • Some fluency in the other tongues of our stack: Java/Scala, Python, or Go.The Warden’s Code (Core Competencies) Ownership. Production health, cost, and security are your watch. Nobody else’s. Pragmatic judgment. The simplest architecture that does the job, and you can explain why. Communication. Clear design docs, PR descriptions, and incident reports. You can explain a decision to someone who has never seen a terminal. Collaboration. You work well with product, QA, security, and every other engineering team. Mentorship. You leave the team stronger than you found it. The First Six Moons (Success Measures) Expected Outcomes 30 days: Keys to the gate in hand. First production change shipped through the full pipeline. Existing Lambda and container services reviewed and their weak points written down. 90 days: You own one or more services end to end, including on-call. At least one improvement delivered to observability, deployment safety, or cost. 6 months: You lead the design and delivery of a new service or a major refactor, and you set or raise a team standard (a Lambda project template, a base Docker image, a Terraform module). Must have • 6+ years of professional software development., • 4+ years building and operating production Node.js services in TypeScript., • 3+ years running production workloads on AWS Lambda and ECS/Fargate., • Owned at least one service from design through launch and on-call., • Node.js internals: event loop, async patterns, streams, memory behavior, CommonJS and ESM., • Fastify: built production APIs and migrated existing APIs to it., • Vue.js: built production UIs and migrated existing UIs to it., • AWS Lambda: handler lifecycle, execution environment reuse, concurrency model, event source mappings, layers, container-image functions, runtime upgrades., • Production use of IAM, API Gateway, SQS, SNS, EventBridge, Step Functions, DynamoDB, S3, CloudWatch, ECR, ECS/Fargate, and VPC networking., • AWS SDK for JavaScript v3: modular clients, middleware, pagination, retry configuration., • Event-driven design: idempotent handlers, retry safety, dead-letter queues, partial batch failure reporting., • Docker: multi-stage builds, layer caching, pinned base images, non-root users, debugging containers locally and in production., • Terraform in production: remote state, modules, per-environment layouts., • GitHub Actions or equivalent: test gates, environment promotion, OIDC federation to AWS with no long-lived credentials., • Safe deploys: Lambda aliases with weighted traffic shifting, ECS rolling or blue/green, automated rollback on alarm., • Testing: unit, integration, and contract tests (Jest, Vitest, or ava); local Lambda emulation with SAM CLI or LocalStack., • MongoDB or DocumentDB, plus Elasticsearch or OpenSearch., • Secrets in AWS Secrets Manager or SSM Parameter Store with KMS., • Observability: structured logging, metrics, distributed tracing, SLOs, alarms, dashboards., • On-call participation, incident leadership, and blameless postmortems., • Writes design docs with explicit trade-offs (Lambda vs. Fargate, sync vs. async)., • Reviews code and mentors mid-level and junior engineers. Preferred • AWS certification: Developer Associate, Solutions Architect Associate or Professional, or DevOps Engineer Professional., • AWS Organizations and multi-account landing zones., • Identity-aware proxy or zero-trust access (Pomerium or equivalent)., • OpenTelemetry across Lambda and container workloads., • Container supply-chain tooling: SBOM generation, image signing, Trivy, Grype, or Amazon Inspector., • Migrated workloads between Lambda and containers, or from legacy hosts to serverless., • Worked under SOC 2, PCI, or gaming/casino compliance., • Java/Scala, Python, or Go.

The Receiving Inspector (RI) inspects components, materials, and products then receives them into the Repair Station Quality System.The RI verifies parts and components are in compliance to purchase order, repair order, and work order requirements including Certification documents.Accomplishes all w

Davidson Hospitality Group - - Responsibilities: Inspect guest rooms to ensure cleanliness and presentation meets high standards; Provide direction on cleaning procedures to the housekeeping staff; Coordinate with the maintenance team to ensure rooms are in good condition and repairs are made promp

Job Description Job Summary Performs Inspection of aircraft maintenance and alterations for quality and airworthiness, providing the approval for return to service with respect to work performed for the work that the Service Center (FAA Certificated Repair Station) is rated. The Quality Assurance Inspector may also perform aircraft maintenance (including Inspections), preventative maintenance and alterations and assist customers with technical and operational support relative to the customer’s aircraft. Job Duties & Responsibilities Accomplishes all work while following company and industry safety standards while maintaining the highest level of quality. Adheres to all FAA Regulations, the Repair Station Quality Control Manual (RSQCM), and all other approved data. Maintains complete knowledge of the work scope of assigned aircraft Determines airworthiness requirements for aircraft undergoing inspection (reference FAR 43.15) Verifies inspection program is applicable to assigned aircraft Performs conformity inspections for certification projects Supports import/export airworthiness approval Verifies technical data acceptable to and/or approved by the FAA, has been used to provide inspection and approval for return to service with respect to work performed Insures corrective action(s) provides for complete correction of discrepancy Provide(s) record(s) of major repairs and alterations (reference FAA 337) Provides maintenance record entries with respect to work performed Contributes to a positive work environment while maintaining the utmost level of professionalism at all times. Able and willing to mentor others. Works assigned shift and unscheduled overtime as-needed or requested. Ability to travel and perform AOG maintenance. Regularly communicates directly with customers and vendors. Excellent written and verbal communication skills. Maintains a clean and organized work area at all times and adheres to company dress standards. Perform all other duties as assigned to support the efficient operation of the department and company. Qualifications High school graduate or equivalent with additional courses in aircraft maintenance in recognized service or technical school programs. FAA Airframe and Powerplant certificate required 5+ years experience in aircraft maintenance and alteration of turbine aircraft preferred Experience with the methods, practices, techniques, aids, equipment and tools used to perform aircraft maintenance and alterations. Required Thoroughly familiar with the applicable regulations and proficient in the use of the various inspection methods, practices, techniques, aids, equipment and tools appropriate for the work being performed and approved for return to service. Required Specific working knowledge of FAR 43, FAR 145, FAR 91. Intermediate computer skills. FAA Inspection Authorization (IA) preferred. Previous FAR Part 135 Experience (Including RTS) preferred. Previous FAR 91.411 & 91.413 Experience preferred. Previous Avionics Installation / Check-Out Experience preferred. Working Conditions Office environment Possible hangar and ramp environments with variable temperature range Physical Requirements Ability to wear and utilize personal protective equipment Must be able to lift up to 50 pounds without assistance Must be able to lift and carry up to 100 pounds with assistance Comfortable in tightly enclosed areas, heights involving lifts and ladders, as well as, flying. Requires the ability to perform all physical functions of the job (hear, stand, kneel, walk, etc.) Compensation and Benefits: The compensation for this position typically falls between $40 and $44 per hour. This position is eligible for tech leveling to reflect varying levels of experience. This position is eligible for overtime and may be eligible for shift differential or relocation assistance. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest, and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

The Quality Assurance Inspector may also perform aircraft maintenance (including Inspections), preventative maintenance and alterations and assist customers with technical and operational support relative to the customer's aircraft.

We're seeking a skilled and detail-oriented Fire Sprinkler Inspector to join our growing Central Arkansas team. Collaborate within a team of inspectors to troubleshoot, problem-solve, and learn.

Are you passionate about cleanliness and attention to detail? Do you have an eye for spotting imperfections? Our hotel is seeking a Room Inspector to ensure our guest rooms meet the highest standards of cleanliness and presentation. As a Room Inspector, you will work with the housekeeping staff, pro

The successful candidate will have current Texas licenses as a fire sprinkler inspector, fire alarm inspector, and fire extinguisher inspector. Fire Protection Inspector Apprentice. Fire Protection Inspector Position.

Although not required, it is beneficial for the successful candidate to be licensed as a fire sprinkler inspector, fire alarm inspector, and a fire extinguisher inspector. Fire Protection Inspector Position. A Fire Protection Inspector is responsible for performing scheduled or unscheduled maintenan

As a Room Inspector, you will work with the housekeeping staff, provide direction on cleaning procedures, and inspect guest rooms to ensure they meet our high standards. Are you passionate about cleanliness and attention to detail? Do you have an eye for spotting imperfections? Our hotel is seeking

Help This position is established as a senior auditor in a division office (Centers for Medicare and Medicaid Audit Division (CMSAD), Office of Audit Services (OAS), Office of the Inspector General (OIG), Health and Human Services (HHS). The senior auditor will provide audit services to CMSAD which conducts and oversees audits of the Medicare and Medicaid programs. The senior auditor in CMSAD serves as a subject matter expert for Medicare, Medicaid, and Children's Health Insurance programs which are extremely large (approximately $1.5 trillion in annual spending) Federal healthcare programs with very complex rules and regulations. The senior auditor assists in directing CMSAD audits that focus on applicable OIG priority outcomes. The senior auditor receives assignments to serve as a member of an audit team and independent work assignments for an audit segment or study project. The incumbent studies pertinent laws, legislative history, regulations, contracts, and management controls to ascertain the purpose, scope, and objectives of the organization or function; the manner in which the organization or function is conducted and financed; and the nature and extent of management authority and responsibility for the organization or function. Plans and contributes to comprehensive audits for a wide range of health and human services programs, grantees and contractors, and others receiving funds from programs administered by the Department. Develops or modifies auditing methods and techniques to resolve a variety of complex auditing problems. Conducts detailed presurvey analysis, including correlation of findings and conclusions resulting from pre-survey analysis and evaluation to ascertain probable scope and depth of audit and to identify problems. Provides advance notification and develops and disseminates guidelines on probable areas of emphasis, approaches which may be expected, pre-survey readiness actions, development of audit response plan. The senior auditor will provide expert advice and direction for the program content of medical review contracts. The senior auditor will coordinate with the Division Director and regional staff to ensure that medical review is performed when needed. The senior auditor will assist in the monitoring of the contractors' adherence to program requirements and interact, if necessary, report any deficiencies to the Division Director.

Are you ready to start Building America? At Lexicon, we're seeking a skilled Quality Control Inspector to join our team and be a part of our continued success. Quality Control Inspector - Duties And Responsibilities Inspects all fabrication jobs to maintain the quality levels of work produced in acc

Testing, Gas, Gas Technician, Electrical, Inspector, Technology, Energy, Engineering, Quality. This position will be filled as a Auto/Hydraulic Tech Apprentice, I II, III, or Journeyman based on the qualifications and experience of the selected candidate.

Dassault Falcon Jet in Little Rock is seeking a Quality Control Inspector at the Little Rock Service Center.

Quality Control Inspectorgpac, a recruiting firm with 30+ years in business, is partnered with a well-established company in the structural steel and metals fabrication industry in the Little Rock, AR area. Our client is seeking a Quality Control Inspector to support quality inspections in a steel f

Quality Control InspectorAre you ready to start "Building America?" At Lexicon, we're seeking a skilled Quality Control Inspector to join our team and be a part of our continued success. AWS certified welding inspector, ASNT level-II certification, and/or SSPC/NACE certification is desirable. Must b

RES is seeking a QA/QC Inspector to support audits and inspections across large industrial construction projects.

Dassault Falcon Jet Little Rock Service Center is seeking a Quality Control Inspector to perform inspections for quality and airworthiness on Falcon aircraft.

Quality Control Inspector - Physical Demands Ability to lift 50 lbs. Are you ready to start “Building America?” At Lexicon, we're seeking a skilled Quality Control Inspector to join our team and be a part of our continued success. Quality Control Inspector - Duties And Responsibilities Inspects

Dassault Falcon Jet in Little Rock is seeking a Quality Control Inspector for the weekend shift.

Dassault Falcon Jet in Little Rock is seeking a Quality Control Inspector at the Little Rock Service Center.

QUALITY CONTROL INSPECTOR- LITTLE ROCK SERVICE CENTER (WEEKEND) Requisition Number : QUALI002074 Locations Showing 1 location Description Job Summary Perform major inspections of the aircraft.

Little Rock is seeking a skilled Quality Control Inspector to maintain quality levels in steel fabrication.Candidates should have 5+ years of experience and relevant certifications.This position requires attention to safety standards and offers competitive pay and benefits.Responsibilities include i

Able to work unsupervised for extended periods. Supports production aircraft under Production Certificate System.

Supports production aircraft under Production Certificate System. Able to work unsupervised for extended periods.

Duties and Responsibilities: Perform inspections of purchased parts according to acceptance criteria using standard sampling plan.Able to perform First Article Inspection (FAI) of manufactured parts, electromechanical assemblies and final assemblies.Physical, mechanical and/or electrical measuremen

A leading aviation company in Arkansas seeks a Supervisor of Inspection to oversee the inspection process of aircraft and components.Responsibilities include planning and scheduling inspections, interfacing with production teams, and ensuring compliance with regulatory documentation.The ideal candid

Aircraft InspectorPerform major inspections of the aircraft.

Wayne State University is looking for an Inspector for Structures and Bridges in South Hill, VA.

Field Audit & Inventory Inspector (1099 Contractor). Quiktrak is seeking 1099 Audit and Inventory Inspectors to perform field audit inspections in your local area. Our most successful inspectors are:.

NRSS) is hiring a Railroad Flagger. Keywords Assistant Roadmaster, Bridge Inspector, Bridge Manager, Bridge Maintainer, Bridge Supervisor, Division Engineer (DE), Employee In Charge (EIC), Flagger, Flagging, Flagman, Foreman, Foremen, Maintenance Of Way (MOW), Manager Track Maintenance (MTM), Manage