Trabajos programming en Syracuse, NYCrear alertas

Job DescriptionPower-Flo Technologies is a leading distributor of electrical equipment offering one of the most comprehensive product and service portfolios in the state, including automation, drives, controls, power distribution, and motor repair. We are looking for an experienced Applications Engineer to join our Upstate New York team. You will play a critical role in delivering complete, real-world systems and solutions to our customers. Applications Engineer Primary Functions • Pre and post sales support for automation, PLCs, drives, motion control, and machine vision products and services., • Assist customers with proof of concept for automation, PLCs, drives, motion control, and machine vision applications, • Assist sales and account managers as necessary to close business., • Phone and On-Site customer support., • Preparation and execution of product training classes including development of course and materials., • Attend vendor training classes as offered and/or required., • Maintenance, appearance and upgrades to Machine Vision demos., • Weekly engineering activity report and schedule., • Target and plan for minimum $20K annual engineering and training billings., • Minimum 2 customer calls per week, whether technical or sales., • Monitor and complete assigned Engineering Tasks, • BS Engineering or equivalent technical degree, • Knowledge of automation, PLCs, drives, motion control, and machine vision applications, • Advanced computer skills: Windows, VM Ware, Networking, • Knowledge of Siemens programming and HMI software a plus, • Ability to operate a motor vehicle We are an equal opportunity employer offering competitive compensation and benefits package including health, disability, life insurance, 401(k) and long-term disability plans. Salary Range $75,000 - $125,000 annually About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Pattern Maker (Metal) 1st Shift Location: Syracuse, NY Industry: Manufacturing & Production Job Category: Skilled Trades / Machining Compensation: $34.86/hour + relocation assistance Type: Full-Time, 1st Shift (6:00am2:30pm) About the Opportunity Eatons ES GEIS CHD division is hiring a Pattern Maker (Metal) for its Syracuse facility. This is a hands-on, high-skill role on a first shift with competitive pay and relocation support. Youll work with advanced casting and tooling processes and use both manual and CNC machining systemsincluding SolidWorks programmingfor high-precision pattern production. What Youll Do Plan and execute complex hand-finishing operations on metal castings Fabricate patterns, core boxes, and molds from various materials Layout, align, and fasten split sections for plates or cope and drag assemblies Perform highly intricate layout and template work from prints Setup and operate machine toolsmanual and CNCwith customized setups Create and modify CNC programs using SolidWorks (Mastercam preferred) Apply pattern making knowledge to develop and improve processes Conduct bench work: fitting, polishing, scraping, and inspection Interpret prints and detect errors, escalating complex issues when needed Perform TPM duties like lubrication, cleaning, and tightening components What You Bring High school diploma or GED At least 4 years of Journeyman-level Patternmaker experience OR a Journeyman license U.S. work authorization (no corporate sponsorship) Strong manual machining skills and CNC programming proficiency SolidWorks and Mastercam experience (preferred) Want to Stand Out? Wed love to hear directly from you. Submit a short video introducing your experience and approach to high-precision metal patternmaking. Video submission link:

Job Description New York State Homes and Community Renewal (HCR) is the State’s affordable housing agency, with a mission to build, preserve, and protect affordable housing and increase homeownership throughout New York State. A Civil Service exam is not required for this position. Candidates must meet the minimum qualifications outlined below to be considered. NYS Homes and Community Renewal (HCR) is committed to fostering a culture of diversity, equity, inclusion, and accessibility. Our work would not be possible without the diverse backgrounds, experiences, ideas, and abilities of our employees. HCR is committed to developing a workforce which represents the diverse population of New York State. HCR embraces a diverse and inclusive work environment by encouraging all individuals, including those with disabilities, to apply to open positions at the agency. Duties and Responsibilities: • Take training and become certified as a Section 8 HCV specialist; participate in other trainings as required., • Serve as subject matter expert in utilizing Emphasys Elite system., • Develop new report enhancements using Crystal Reports and complete the entire development iteration, including deployment into the Elite system. Using SQL query for single/batch correspondence letter and reports., • Assist the Data System Manager in their duties and provide technical support to ensure the efficient functioning of the system., • Serve as an IT administrator responsible for managing Elite system setup, user access, integration, and providing support for technical issues by coordinating with subject matter expert (SME), Vendor, Statewide staff, and end-users., • Participate in the planning, organization, and implementation of activities related to Software (SaaS) utilized by the organization., • Coordinate with the New York State Office of Information Technology Services to ensure compliance with Statewide data security and other federal and state requirements., • Develop procurement and bid request and review bids for technology related services when necessary., • Work with vendors to execute short-term and long-term projects according to plan and ensure that the project meets New York State standards., • Assist with training in all aspects of software products and hardware., • Participate in reviewing and maintaining access of end-users in gov’t azure cloud that houses Emphasys Elite system., • Provide support and oversee the implementation of enhancements and fixes applied to software product., • Communicate with personnel and outside agencies to exchange information, coordinate activities and resolve issues or concerns; serve as a liaison between users, technicians, contractors, vendors, and others., • Prioritize and schedule requests for technical support services to the Vendor; ensure user needs are met and technical support issues are resolved in a timely manner., • Aid Vendor technicians in troubleshooting software, hardware, and network issues., • Install and configure new technology as required; research, identify and evaluate new hardware and software that would benefit the organization and make purchasing recommendations., • Support the End-of-Month payment processing, that allows for LAs to transmit updated case information for the purpose of making payments to program stakeholders., • Support system integrations and processes that allow for payment transactions in conjunction with our partnering financial institution, the New York State Department of Taxation and Finance (DTF), and the New York State Housing Trust Fund Corporation’s Office of Financial Administration., • Assist with data accuracy verification by querying, reviewing, and verifying data field mappings., • Conduct user acceptance testing of requested system customizations, to include documents testing procedures and results., • Support the system performance testing review process and system integration testing process., • Identify changes needed in existing systems to comply with new federal and state directives., • Maintain file server for the Organization’s internal knowledge base, perform SQL programming of application interfaces; develop and support database systems., • Maintain a variety of records and reports related to enhancements, resolutions, and projects., • Must have 3 years minimum experience of Emphasys Elite system, HQS Mobile, and crystal report., • Self-starter; able to work independently; organized., • Customer service oriented., • Good written and oral communication skills. This job description is not intended to be all inclusive and employee will be expected to perform other reasonably related duties as assigned. What we offer at NYSHCR: • Extensive benefits package including paid leave, including excellent health, dental, vision and retirement benefits with the New York State & Local Employees’ Retirement System., • Promotional opportunity for dedicated professionals, • Work life balance benefits including a 37.5 hour work week and paid time off benefits including, vacation, sick, personal days, and Federal Holidays, • Opportunity for compressed scheduling, • 12 weeks of Paid Parental Leave, • Paid Family Leave Under the leadership of Governor Kathy Hochul and Commissioner RuthAnne Visnauskas, HCR is a vibrant, innovative agency that integrates and leverages New York State’s housing resources. We have offices in New York City, Albany, Buffalo and Syracuse, and employ a diverse workforce of professionals who are hard-working and committed to serving low and moderate income families. Our mission is far reaching, encompassing single and multifamily housing finance, home improvement, rent regulation, housing subsidies, and community development. We partner regularly with a variety of public and private stakeholders. Achieving this mission requires a wide range of skills and backgrounds in public policy, administration, real estate, construction. finance, law, and many other areas of expertise. We seek to provide a workplace environment that is productive, flexible, accountable, ethical, and caring. Our employees are empowered to make a difference where they live and work. We offer competitive pay and a comprehensive benefits package, including paid leave, health, dental, vision, retirement, and family-friendly policies. Applicants must include resume and cover letter New York State is an Equal Opportunity Employer (EOE)

Job Description Job Title: Project Architect / Project Manager Company: Luxus Group Position Type: Full Time Reports To: Partners Directed By: Partners About Luxus Group: Luxus Group is an award-winning, multi-disciplinary firm of architects, interior designers, structural and geotechnical engineers, landscape architects, and digital modeling & animation specialists. Our firm is known for delivering innovative, high-quality solutions that respond to our clients' needs on time and within budget. With a strong commitment to professional growth and a collaborative environment, Luxus Group provides exceptional opportunities to build your career. We are seeking talented individuals to join our dynamic design team and contribute to our mission of creating inspiring and sustainable environments. Position Summary: As a Project Architect / Project Manager, you will take primary responsibility for managing and orchestrating the work of the entire design team, consultants, code enforcement officials, suppliers, and contractors. Acting as the primary contact for the Owner, you will also be responsible for identifying opportunities, pursuing commissions, negotiating contracts, and managing project finances. This role requires exceptional leadership, organizational, and communication skills to deliver successful outcomes for our clients. Essential Functions: Design and Construction Documents: * Programming and planning * Conducting site and environmental analysis * Schematic design development * Engineering systems coordination * Building cost estimation and analysis * Code research and compliance * Design development and preparation of construction documents * Materials research and selection * Writing project manuals/specifications * Document checking and coordination Construction Contract Administration: * Proficiency with construction contracts (AIA and other standards) * Leading bidding and contract negotiations * Office-based construction phase administration * On-site construction observation and quality assurance Management: * Comprehensive project management, including planning, staffing, and resource allocation * Coordination of project documentation and approvals * Client relationship management * Marketing and business development * Financial management, including budgeting and monitoring project costs * Contract negotiation and compliance Qualifications, Skills, and Abilities: * Proven ability to plan, organize, and direct complex projects * Strong leadership and coordination skills to manage multidisciplinary teams * Excellent verbal and written communication skills to maintain client and team relationships * Expertise in documentation, submittals, approvals, and monitoring project progress * Detail-oriented with strong problem-solving and analytical abilities Education and Experience: * Licensed Architect (required) * Associate's or Bachelor's degree in Architecture or related field (required) * Minimum of 5 years of professional experience (additional experience preferred) * Construction-related experience preferred but not required * Portfolio demonstrating relevant project experience (required) * References from clients, contractors, and consultants (required) Training and Development: * Comprehensive in-house training provided on office standards, Revit standards, and professional practices

Job DescriptionNCS is seeking a compassionate and skilled Speech-Language Pathologist (SLP) to join our multidisciplinary team dedicated to supporting the communication and social-emotional needs of K–8 students. In this role, you will work directly with students—many of whom are Autistic or have identified speech and language challenges—by providing individualized and group therapy services. You’ll play a key part in fostering communication growth, self-advocacy, and social interaction skills that empower students to thrive academically and socially. With access to rich professional development, a collaborative team, and a mission-driven school culture, this position offers both purpose and professional growth. What We Offer • Supportive SLP Team: Join a team of 4+ in-house SLPs for regular collaboration and shared expertise., • Expert Supervision: Direct mentorship from a licensed, experienced SLP team manager., • Professional Development: Monthly consultation with a Social Thinking® collaborative trainer and access to targeted workshops., • Generous CEU Allowance: $250 annually for continuing education., • Deliver individualized and small-group speech and language therapy to students with IEPs across K–8., • Address a broad range of communication areas including:, • Receptive and expressive language, • Articulation and phonological processing, • Fluency and voice, • Social-pragmatic language and conversational skills, • Design and implement Social Club programming for Autistic students using Social Thinking® methodologies.Assessment and Documentation, • Conduct initial and ongoing evaluations, screenings, and assessments to identify communication disorders., • Develop, write, and update IEP goals and present levels of performance in collaboration with the IEP team., • Maintain clear, accurate, and confidential records including session notes, progress reports, and compliance documentation., • Ensure therapy and documentation adhere to IDEA regulations and school policies.Collaboration and Consultation, • Provide support to general education and special education staff with classroom strategies and interventions for at-risk or struggling students., • Participate actively in student support meetings, IEP meetings, and family consultations., • Work closely with school leaders, teachers, and other specialists to ensure holistic support for students.Professional Development & Growth, • Attend and contribute to weekly team meetings and regular supervision with an experienced SLP team manager., • Participate in ongoing school-wide professional development sessions., • Engage with outside experts and Social Thinking® consultants through monthly supervision and collaboration., • Take advantage of $250 CEU reimbursement and opportunities to supervise graduate-level SLP students.Qualifications, • Master’s degree in Speech-Language Pathology or Communicative Disorders, • Valid state license or eligibility for licensure as an SLP, • Clinical Fellows (CFs) encouraged to apply – high-quality supervision provided, • Experience supporting school-aged students with disabilities, especially Autistic learners, • Familiarity with Michelle Garcia Winner’s Social Thinking® curriculum, • Strong interpersonal, organizational, and communication skills Requirements Authorized to work in the US without sponsorship TSSLD Certification Required Master's Degree in Speech and Language Pathology or Communicative Disorders Licensed SLP/CF (high quality supervision available) Requisition #cme8jtetcmnob0jo5v9lfg1f6

Job Description Job Title: Data Architect Company Introduction: G&C Foods is a leading foodservice redistributor headquartered in Syracuse, NY, with an additional facility in Alachua, FL. Serving 28 states and over 30 countries, we pride ourselves on delivering quality products and exceptional service. Our technology landscape includes an IBM iSeries ERP and WMS running on DB2, a TMS on Microsoft SQL Server, and various homegrown applications. Location: Syracuse, NY Schedule: Monday - Friday 8:00 AM - 5:00 PM Job Summary: We are seeking an experienced Data Warehouse Architect to join our G&C Business Solutions Group. This is a pioneering role that reports directly to the Director of Software Engineering. The successful candidate will be instrumental in designing, implementing, and maintaining a scalable data warehouse solution that consolidates data from a variety of software applications. This data warehouse will empower business users to perform ad hoc analyses independently while also supporting our software engineering team in developing data-driven applications. We are specifically looking for candidates with proven experience in building data warehouses from the ground up. Ideal candidates will not only bring technical expertise but also the perspective gained from overcoming challenges and setbacks throughout the development process. We value individuals who have demonstrated resilience, humility, and the ability to learn from failure—qualities that we believe are critical to delivering innovative and effective solutions. Duties and Responsibilities: • Collaborate with Stakeholders: Engage with business leaders to identify key business problems and data requirements., • Data Warehouse Design: Architect a robust data warehouse that integrates data from disparate databases, such as IBM DB2, Microsoft SQL Server, and other applications., • Data Labeling and Metadata Management: Develop a consistent labeling system and metadata repository to ensure clear and unequivocal data communication across the organization., • ETL Processes and Data Integration: Oversee the extraction, transformation, and loading (ETL) of data, ensuring temporal alignment and data integrity., • Data Modeling: Create logical and physical data models, including the development of data cubes for efficient querying and analysis., • Data Governance: Implement data quality standards and governance policies to maintain the accuracy and reliability of data., • Support Business Intelligence: Enable self-service BI by integrating tools that allow business users to perform ad hoc analyses without IT intervention., • Collaborate with Teams: Work closely with IT professionals, software engineers, business analysts, project managers, EDI specialists, and instructional designers within the G&C Business Solutions Group., • Education: Bachelor’s degree in Computer Science, Information Systems, or significant experience in a related field;, • Experience:, • 7+ years of experience in data warehousing, data architecture, and data modeling., • Proven track record of designing and implementing large-scale data warehouses., • Experience with ETL tools and processes., • Familiarity with IBM iSeries systems, DB2, and Microsoft SQL Server. o Experience integrating data from heterogeneous systems., • Technical Skills:, • Proficiency in data modeling techniques (both logical and physical)., • Strong understanding of metadata management and data labeling., • Knowledge of data governance and data quality best practices., • Experience with BI tools (e.g., Power BI, Tableau, Cognos)., • Understanding of temporal data alignment and time-series data management., • Soft Skills: Excellent communication and interpersonal skills., • Strong analytical and problem-solving abilities., • Ability to work collaboratively in a cross-functional team environment., • Self-motivated with a proactive approach to identifying and solving problems., • Preferred Qualifications:, • Industry Experience: Experience in the foodservice distribution industry., • Technical Expertise: Knowledge of RPG programming language helpful but not required., • Experience with cloud-based data warehousing solutions (e.g., AWS Redshift, Azure Synapse Analytics)., • Familiarity with big data technologies (e.g., Hadoop, Spark). At G&C, we believe exceptional people deserve exceptional rewards. When you join our team, you’re not just taking a job, you’re stepping into a career with a company that invests in your growth, values your contribution, and celebrates your success. Our Benefits Package Includes: • Competitive Health Coverage – Medical plans starting at just $24.73/week, plus comprehensive vision, dental, and a 401(k) with company match to secure your future., • Company-Paid Life Insurance – Because your peace of mind matters., • Performance-Based Bonuses – Earn up to the equivalent of five additional weeks’ pay each year based on your impact and results., • Onsite Fitness & Wellness Centers – Stay active and healthy without leaving the workplace., • Flexible Scheduling Options – Designed to support your life outside of work., • Company Culture Perks – From team cookouts and appreciation events to seasonal holiday gifts, we celebrate our people year-round., • Exclusive Employee Product Discounts – Access unbeatable prices on a wide range of products, available only to our team., • Career Advancement – Clear pathways to grow within the company, backed by leadership who invest in your success., • Open-Door Leadership – Access to decision-makers who listen, act, and value your input., • Annual Flu Clinics – Convenient, no-cost health support right at work. Contact/Application Information: If you’re interested, please apply through Indeed. If you have any questions, you can email . Thank you for your interest, and we look forward to meeting you! #ADP1

Job Description Armstrong has an opening for a first shift CNC machinist 1. Armstrong Rapid manufacturing has been in business for over 50 years in the East Syracuse NY area. Armstrong specializes in both prototyped and low volume production machined castings. Armstrong has a benefit package that includes paid holidays, bonus and referral programs, paid vacation, a 401K, 100% company paid life insurance, sick time, supplemental short term disability insurance, dental, medical, vision, accident, cancer and critical care insurance plus safety awards. We also provide free coffee daily for our employees available at multiple coffee kiosks. Our website is and it shows many of the exciting aspects of our company! Take a look! The salary range for our CNC Machinist 1 job is $27.00-$33.00 per hour with the job description below. Summary/Objective: Produces machined parts by programming, setting up, and operating a computer numeric control (CNC) machine for vertical and horizontal milling operations while maintaining quality, efficiency, and safety standards, and recording production output. Job Responsibilities • Plans machining by studying work orders, blueprints, work order data from engineering, materials, specifications, drawings, reference plans, locations of surfaces and machining parameters, and interprets geometric dimensions and tolerances (GD & T)., • Checks stock-parts to ascertain the amount available, anticipating needed parts stock, requests expedited orders for parts stock, and verifies receipt of stock., • Programs mills by entering instructions, including zero and reference points, setting tool registers, offsets, compensation, and conditional switches, calculating requirements, including basic math, geometry and trigonometry; proving part programs., • Sets up mills by installing and adjusting three and four jaw chucks, tool attachments, collets, bushings, cams, gears, stops, and stock pushers, indicating vices, tramming heads etc., • Loads feed mechanism by lifting stock into position., • Verifies settings by measuring positions to first run part, and approved sample work pieces while adhering to required standards., • Maintains specifications by observing milling, grooving, and cutting, including all vertical and horizontal machine specs; taking measurements, detecting malfunctions, troubleshooting processes, adjusting and reprogramming controls, sharpening and replacing worn tools; adhering to quality assurance procedures and processes., • Maintains safe operations by adhering to safety procedures and regulations., • Maintains equipment by completing preventative maintenance requirements; following manufacturer's instructions, troubleshooting malfunctions and requesting repairs and assistance as needed, • Maintains continuity among work shift by documenting and communicating actions, irregularities and continuing needs., • Documents actions by completing production and quality logs., • Updates job knowledge by participating in educational opportunities, reading technical publications as requested., • Accomplishes organizational goals by accepting ownership for accomplishing new and varied requests; takes initiative to add value to job accomplishments., • Adheres to all safety policies and practices, consistently uses personal protective equipment and practices good housekeeping., • Applies classroom and on the job training information, knowledge, skills and abilities consistently in a quality oriented manner., • High school diploma or GED and completion of Journeyman CNC Machinist apprenticeship including the classroom coursework and four (4) years' experience in set-up, operations, and optimizing CNC vertical and horizontal milling machining centers. Thorough understanding of geometric dimensioning and tolerancing. Demonstrates basic CNC programming skills and ability to operate a wide variety of CNC machines. Ability to set up and troubleshoot a wide variety of CNC machines., • Ability to read prints, diagrams, and use micrometers, verniers, calipers, and gauges. Ability to walk, remain on feet for extended periods, reach, stoop, kneel and lift up to and including 35 pounds as needed. AAP/EEO Statement Armstrong is proud to be an equal opportunity workplace and an affirmative action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, age, veteran status, or any other protected status. EOE Job Posted by ApplicantPro

Job Description CNC Programming Lead A growing manufacturing company in Central New York is seeking a skilled and motivated CNC Programming Lead to join our team. This hands-on leadership role is ideal for someone ready to guide a team of CNC programmers while driving continuous improvement across machining operations. The successful candidate will play a key role in reducing waste, enhancing productivity, and ensuring high-quality output across the shop floor. Key Responsibilities: * Collaborate with Sales to evaluate new project opportunities and develop accurate cost estimates for quoting. * Write CNC programs and lead a team of programmers by establishing best practices, mentoring, and fostering a culture of technical excellence. * Oversee the design and continuous improvement of manufacturing processes and systems. * Drive cost-reduction initiatives through improved processes and reduced scrap/rework. * Lead process improvement projects focused on increasing efficiency, safety, and quality. * Troubleshoot production issues, implement corrective actions, and monitor outcomes. * Guide the design and approval of fixtures, tooling, and equipment needed for production. * Stay current on manufacturing trends and incorporate relevant advancements. Required Qualifications: * 7+ years of manufacturing experience with 5+ years of CNC programming (Mastercam preferred). * Strong leadership abilities with experience mentoring or managing teams. * Knowledge of lean manufacturing, process optimization, and continuous improvement. * Proficiency in CAD/CAM software and advanced machining techniques. * Strong communication and problem-solving skills. * Ability to manage multiple projects in a fast-paced environment. * Experience with quality, safety, and compliance standards in manufacturing. * Bachelor’s degree in Mechanical Engineering is preferred but not required.

Job Description General Description: The Utility Maintenance Mechanic is responsible for completing assigned maintenance duties to ensure customer, team member, and vendor satisfaction. The Utility Maintenance Mechanic does this by performing onsite maintenance for production equipment by completing breakdown and preventative maintenance on all filling, packaging, processing, and palletizing equipment. The Utility Maintenance Mechanic will diagnose, repair, and replace industrial equipment in a fast-paced production environment. The Utility Maintenance Mechanic completes these functions to support the manufacturing of dairy-related products. Job Responsibilities: • Responsible for achieving assigned goals in the area of maintenance, safety, quality, performance, and cost., • Responsible for troubleshooting, maintaining, and repairing mechanical malfunctions to increase productivity and equipment capabilities – including, but not limited to, disassembling and reassembling machinery, overhauling gearboxes, replacing bearings/bushings/etc., • Read blueprints, schematics, and diagrams to determine the method and sequence of assembly of a part, machine, or piece of equipment., • Expedite the reentry of down equipment within a manufacturing environment to working conditions., • Repair and calibrate hydraulic and pneumatic assemblies., • Test the performance of electro-mechanical assemblies using test instruments such as multi-meters, volt, and amp meters., • Install electronic parts and hardware using soldering equipment and hand tools., • Operate, test, program, and maintain complete manufacturing lines such as beverage filling machines, conveyors, and palletizers., • Source parts from vendors when parts are unavailable or have long lead times; order parts in a timely manner to ensure equipment reliability., • Maintain Maintenance Inventory System to ensure accurate inventories., • Communicate effectively between shifts and other departments, including equipment status to supervisors/coworkers at the end of the shift as well as logbook documentation., • Responsible for complying with GMPs, SOPs, corporate and/or plant policies, rules, and regulations., • Responsible for following OEM manuals and executing accurate and precise procedures according to those manuals., • Aids and supports all areas in the production facility as assigned by supervisor/lead., • Responsible for gaining competence online circuits and learning proper hookups made in the facility., • Cover breaks and lunches, and other staffing needs as assigned by their supervisor/lead., • Compliant with all legal requirements concerning dairy processing and safety on their assigned shift and reports concerning their supervisor/lead., • Work in a safe manner and reports safety concerns promptly to their supervisor or lead and take corrective actions as necessary to ensure a safe environment., • Responsible for reporting food safety problems and initiating action and for supporting SQF by maintaining food safety and food quality., • Knowledge of boilers, ammonia refrigeration, steam, air compressors, HVAC, sprinkler systems, and electrical systems., • Knowledge of boilers and chemistry testing is preferred., • Knowledge of ammonia systems is preferred., • Understand and respond appropriately to basic to complex employee, vendor, and customer inquiries., • Knowledge of and Skilled in the use of Root Cause Analysis, Troubleshooting methodology, 5S, and Lean Manufacturing concepts., • Knowledge of OSHA general safety regulations, PPE, energy control, confined space, chemical safety, and fall protection., • Skills at a mastery level in at least one area of Maintenance, including electrical fabrication, refrigeration, welding, controls programming, etc., • Advanced knowledge of common wear points on equipment and following manufacturer lubrication recommendations., • Have a disciplined aptitude for repair and uptime urgency., • Own an extensive variety of quality tools, including SAE and Metric, to perform mechanical repairs on automation equipment., • Read, write, and communicate using the English language sufficient to perform job functions (Other preferences will be given for special language skills when there is a business need)., • Knowledge of the company's mission, purpose, goals, and your role in achieving each of them., • Ability to operate facility equipment as required in assigned area., • Satisfactorily complete all company training requirements., • Ability to interpret company documents and literature and UPC/code information., • A minimum of GED or High School Diploma is required., • Minimum 3-5 years’ experience in a mechanical automation field, • Technical trade, military training, or technical college is strongly preferred., • Must have experience with VFDs, stretch or blow molding, conveyors, pumps, Pneumatic sanitary valves, as well as pneumatic and hydraulic systems., • Experience with programmable logic controllers, instruments, and controls, • Experience with closed cooling systems, including evaporator towers, water cooling towers, and chillers., • Experience working in a food manufacturing environment preferred., • Responsible for reporting to work at scheduled times and communicating tardiness and absences with the assigned Supervisor/Manager prior to the occurrence., • Responsible for reporting to work in a condition to work., • Responsible for being well-groomed and dressed in a business-and position-appropriate attire at all times, including ensuring compliance with GMP dress code standards., • Comply with performance criteria, standards of conduct as contained in company policy, employment procedures, and responsibilities as described in the company handbook., • Maintain a safe work environment at all times and immediately report and take appropriate action to correct a safety concern., • Requires morning, afternoon, and overnight availability any day of the week based on assigned shift., • Requests to be scheduled off for a specific day require advance notification and approval by Supervisor/Manager., • Normally protected from weather and temperature changes, possible exposure to hot, cold, wet, humid, or windy weather conditions does exist., • May be subject to exposure to ingredients used in the manufacture of food products, including allergens., • Ability to move throughout all areas of the facility, including but not limited to office, production, and warehouse environments. Including the outside perimeter of the building., • Able to wear all necessary personal protective equipment to perform job functions., • Stand and/or sit continuously and perform job functions for a full shift with a meal break., • Physically able to stand, bend, stoop, kneel, reach, twist, lift, push, pull, climb, balance, crouch, handle, and move items weighing up to 50 pounds without assistance and move objects exceeding 50 pounds with reasonable accommodations., • Visual acuity corrected to perform job functions.

Job DescriptionNCS is seeking a compassionate and skilled Speech-Language Pathologist (SLP) to join our multidisciplinary team dedicated to supporting the communication and social-emotional needs of K–8 students. In this role, you will work directly with students—many of whom are Autistic or have identified speech and language challenges—by providing individualized and group therapy services. You’ll play a key part in fostering communication growth, self-advocacy, and social interaction skills that empower students to thrive academically and socially. With access to rich professional development, a collaborative team, and a mission-driven school culture, this position offers both purpose and professional growth. What We Offer • Supportive SLP Team: Join a team of 4+ in-house SLPs for regular collaboration and shared expertise., • Expert Supervision: Direct mentorship from a licensed, experienced SLP team manager., • Professional Development: Monthly consultation with a Social Thinking® collaborative trainer and access to targeted workshops., • Generous CEU Allowance: $250 annually for continuing education., • Deliver individualized and small-group speech and language therapy to students with IEPs across K–8., • Address a broad range of communication areas including:, • Receptive and expressive language, • Articulation and phonological processing, • Fluency and voice, • Social-pragmatic language and conversational skills, • Design and implement Social Club programming for Autistic students using Social Thinking® methodologies.Assessment and Documentation, • Conduct initial and ongoing evaluations, screenings, and assessments to identify communication disorders., • Develop, write, and update IEP goals and present levels of performance in collaboration with the IEP team., • Maintain clear, accurate, and confidential records including session notes, progress reports, and compliance documentation., • Ensure therapy and documentation adhere to IDEA regulations and school policies.Collaboration and Consultation, • Provide support to general education and special education staff with classroom strategies and interventions for at-risk or struggling students., • Participate actively in student support meetings, IEP meetings, and family consultations., • Work closely with school leaders, teachers, and other specialists to ensure holistic support for students.Professional Development & Growth, • Attend and contribute to weekly team meetings and regular supervision with an experienced SLP team manager., • Participate in ongoing school-wide professional development sessions., • Engage with outside experts and Social Thinking® consultants through monthly supervision and collaboration., • Take advantage of $250 CEU reimbursement and opportunities to supervise graduate-level SLP students.Qualifications, • Master’s degree in Speech-Language Pathology or Communicative Disorders, • Valid state license or eligibility for licensure as an SLP, • Clinical Fellows (CFs) encouraged to apply – high-quality supervision provided, • Experience supporting school-aged students with disabilities, especially Autistic learners, • Familiarity with Michelle Garcia Winner’s Social Thinking® curriculum, • Strong interpersonal, organizational, and communication skills Requirements Authorized to work in the US without sponsorship TSSLD Certification Required Master's Degree in Speech and Language Pathology or Communicative Disorders Licensed SLP/CF (high quality supervision available) Requisition #cma5sepj9etdm0im89f2vdtp0

Job DescriptionDescription: This is a full-time on-site role for a CNC Machinist at Feldmeier Equipment in Syracuse, NY. In this position you will be responsible for setting up and operating drills, Lathes and other computer-controlled machines. You will also set up the equipment with the correct attachments to perform the job. You will test and troubleshoot the programming that controls the equipment. Ensuring the precision and accuracy of the finished parts. As well as inspecting and maintaining the equipment. Requirements: Essential Functions of Position: · Machine Setup- preparing various equipment to run per prints, work orders and other source materials · Machine Operation- entering the program instructions into the CNC and making sure all necessary jigs, and attachments are being used to correctly perform the job · Inspect and monitor the machine to ensure completed parts are to spec and to quality standards · Other Job duties as assigned Minimum Qualifications: · High school diploma or equivalent · Detail-oriented with strong organizational and multitasking abilities. *Must be willing to travel locally and overnight up to 25% of the time. Preferred Qualifications: · technical certification in machining is preferred · Experience with stainless steel processing equipment is a plus Physical Requirements: · Ability to stand and/or walk for up to 8 hours per day. · The ability to work on a computer for up to 8 hours a day. · Being mindful of safety and use proper PPE when required.

Job Description Hidden Level is transforming airspace safety with innovative, scalable drone detection and airspace technology. We provide real-time, actionable data to enhance security across various environments. As we expand, we're looking for a Production Test Engineer to play a crucial role in designing, developing, and implementing manufacturing processes and systems through all stages of the product lifecycle. Location: This position is onsite in the East Syracuse, NY office. Responsibilities: • Develops and leads PCA and System level test plans and fixtures, qualifying product and manufacturing requirements, • Provides troubleshooting and technical support for production activities, • Develops and maintains manufacturing work instruction methods, operation sequences, and processes from creation to release via the change control processes, • Analyzes processes, production data, and quality indicators using statistical methods to determine root causes and improves workflows with corrective and preventive actions, • Qualifies test fixtures and equipment to ensure accurate result to requirements, • Utilizes lean principles to formulate and implement strategies that streamline operations, improves productivity, and reduces manufacturing cost, • Collaborates with cross-functional teams and coordinates new product releases, • Performs time studies and estimates manufacturing costs; provides and executes solutions for relevant tooling and process improvements, • Performs process validation and qualification activities, • Creates and maintains process documentation and production work instructions for new and existing products, • Investigates and resolves production, quality, and equipment issues What We’re Looking For: • Strong analytical and problem-solving skills, • Excellent communication and teamwork driven, • Experience with tooling and fixtures for testing RF and digital printed circuit boards Required Qualifications: • Bachelor of Science (BS) degree in Electrical, Mechanical, Manufacturing, or Industrial Engineering (Electrical preferred), • 3+ years of experience in a manufacturing environment, • Proficiency in MATLAB and Python Scripting/Programming, • Ability to interpret and navigate mechanical CAD drawings, 3D models, and schematics, • Experience with tooling and fixtures for testing RF and digital printed circuit board assemblies (Spectrum Analyzers, Power Supplies, Signal Generators), • Knowledge of PCBA (RF and Digital), wire/cable, and final assembly processes Preferred Qualifications: • Lean/Six Sigma Black Belt or Green Belt certification preferred, • Familiarity with Manufacturing Execution Systems, preferably TIP QA/SFE Compensation and Benefits: Hidden Level offers a competitive salary and a comprehensive benefits package, including health insurance, paid parental leave, flexible time off, 401(k) with employer contributions, life insurance, and disability insurance. The company also provides a remote or hybrid work environment and potential stock options. Salary Range: The anticipated salary range for this position based out of Syracuse, NY is estimated at $88,000 to $110,000 annually. Please note that the salary information is a general guideline only. Hidden Level considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer Equal Opportunity Employer: Hidden Level is an Equal Opportunity/ Affirmative Action employer. All qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category. Security Note: Due to the nature of Hidden Level’s technology, only U.S. citizens can be considered for this position.

Job DescriptionThis position is based at our Syracuse, New York facility with core hours of 2:30pm to 10:30pm. What you’ll do: • Tear down, determine extent of troubles, repair damaged electrical or mechanical mechanism or replace worn or defective parts and reassemble following standard and prescribed safety regulations., • Need a basic understanding of PLC logic and machine programming (Mcode/Gcode), • Adjust equipment to required specification and check to assure effective operation., • Check sequence of machine cycle, determine type of machine malfunction, make all necessary repairs applying machine repair theory along with electrical theory., • Perform electrical test operations., • Work from complex schematic diagrams, manuals and testing procedures., • Troubleshoot all defective printed circuit assembly boards., • Perform similar or associated electrical or mechanical duties as directed., • Detect and report all unusual cases to proper supervision., • Use of judgment to comply with instructions or prescribed routines and to make decisions. Qualifications:Required (Basic) Qualifications:, • Journeymen or three (3) years of documented maintenance experience in an industrial electrical/mechanical trade, • Authorized to work in the United States without Company sponsorship., • No relocation benefit is offered for this position. Only candidates residing within the immediate area of Syracuse facility (50 miles) will be considered for this position. Preferred qualifications: • Four (4) years or more of documented maintenance experience in an industrial electrical/mechanical trade preferred, • Background in machining and electrical equipment, • Two year degree in electronics with mechanical experience/Military electronics experience.

Job Description Civil Engineer - Site Utility Design Luxus Group | Syracuse, NY Position Type: Full-Time Salary: $90,000 - $115,000 per year (commensurate with experience and skills) Reports To: Partners Directed By: Partners/Associates/Project Managers Position Summary: Luxus Group seeks a New York State-licensed Civil Engineer with 10-15 years of experience, specializing in site utility design. This role requires expertise in a variety of project types and sizes, working collaboratively with a multidisciplinary team of Architects, Landscape Architects, and Engineers. Projects include commercial, retail/office, hospitality, collegiate, medical, military, transit, and municipal work across New York State. The Civil Engineer will take primary responsibility for delivering a full range of civil engineering services, from project inception to post-occupancy. This includes serving as the main point of contact for project stakeholders, including owners, consultants, code enforcement officials, and contractors. Luxus Group offers a competitive salary, benefits package, and opportunities for professional growth. Essential Functions: Design/Construction Documents: • Programming and Planning, • Site and Environmental Analysis, • Schematic Design, • Site Engineering, • Cost Estimating and Analysis, • Code Research, • Design Development, • Construction Documents, • Materials Research, • Specification Writing, • Bidding and Contract Negotiation, • Construction Phase Office Support, • Project Management, • Proficiency in AutoCAD Civil 3D, • Expertise in layout, planting, grading, storm conveyance systems, and stormwater management facility design, • Strong graphic skills, including hand drawing and sketching (a plus), • Excellent written and verbal communication skills, • Ability to work collaboratively with team members and consultants, • Demonstrated job knowledge and judgment, • Strong oral, written, and graphic communication skills, • Positive attitude and flexibility, • High productivity and work quality, • Effective client relations If you're passionate about civil engineering and excited to work on a variety of impactful projects across New York State, we encourage you to apply!

Job Description Electrical Controls Engineering Supervisor Pay range: $105-128K DOE **This position is located in Syracuse, NY. Bluefors and Cryomech have recently joined innovative forces to become a world leader in cryogenic technology and manufacturing. Now, as the new Bluefors, a company of 600 professionals from 50+ different nationalities and growing, we are proud to continue serving quantum technology, scientific and other select industries throughout the world. Bluefors is a Finnish-based company formed in 2008 and quickly became a market-leader in ultra-low temperature systems. We design, customize and manufacture measurement systems that can provide a clean and quiet environment for scientific research. Cryomech, a world leader in cryocoolers and cryogenic systems, has been a Syracuse-based high-tech manufacturer since 1963, and will continue to be the brand of product lines from Syracuse. Together we have a strong focus on the quantum computing and information community, and we are here to support scientists and industries go further in their endeavors. For this we have brought together the best minds from a variety of fields. Here we are curious to the core, have wide-range expertise, and have one mission: progress. Together we deliver systems all around the world and the markets for our products are constantly growing. Position Summary The Electrical Controls Engineering Supervisor is responsible for overseeing the design, development and implementation of electrical and control systems, ensuring compliance with industry standards, optimizing operational efficiency and driving innovation. Essential Duties and Responsibilities : Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Lead electrical and controls projects from design to implementation., • Supervise, mentor and develop the electrical and controls Engineering team., • Oversee the design, development and testing of electrical systems and control solutions., • Coordinate with cross-functional teams and stakeholders to align projects with business objectives., • Ensure designs meet technical specifications, operational requirements, and compliance standards., • Ensure all designs and installations comply with safety regulations and industry standards., • Optimize resource allocation to meet project and organizational goals., • Identify opportunities to improve system efficiency and implement innovative solutions., • Provide expert technical guidance and troubleshooting support., • Maintain strong relationships with clients, vendors, and regulatory agencies., • Improve processes and workflows by tracking key performance indicators (KPIs) and taking corrective action as needed., • Ensure all electrical and control systems comply with relevant national and international standards., • Maintain accurate and detailed project documentation. Bachelor's or Master's degree in Electrical Engineering or related field. Minimum of 5 years' experience in Electrical and Controls Engineering. Minimum of 2 years in a supervisory role. Experience with AB and PLC programming/troubleshooting, SCADA systems, power distribution, automation, Rockwell RS Logix family of PLC and the FactoryTalk View Studio HMI software platforms for new equipment is required. Experience using electrical design software (AutoCAD, EPLAN, etc.) and additional relevant experience required. PMP Certification, Six Sigma, or equivalent is preferred but not required. Employee Benefits Bluefors offers a generous benefits package including health, dental, vision, 401K, long and short-term disability, life, training, tuition reimbursement, and Paid Time Off (PTO). This role does not offer sponsorship for work authorization. Bluefors Cryocooler Technologies, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration regardless of disability status, veteran status, or any other New York State or federally protected characteristic. You will receive a confirmation email after you submit the first part of the application. If you do not receive an email, please check your spam folder. Job Posted by ApplicantPro

Job Description General Description: The Maintenance Mechanic is responsible for completing assigned maintenance duties to ensure customer, team member, and vendor satisfaction. The Maintenance Mechanic does this by performing onsite maintenance for production equipment by completing breakdown and preventative maintenance on all filling, packaging, processing, and palletizing equipment, The Maintenance Mechanic will diagnose, repair, and replace industrial equipment in a fast-paced production environment. The Maintenance Mechanic completes these functions in the support of the manufacture of dairy-related products. Job Responsibilities: • Responsible for achieving assigned goals in the area of maintenance, safety, quality, performance, and cost., • Responsible for troubleshooting, maintaining, and repairing mechanical malfunctions to increase productivity and equipment capabilities – including, but not limited to disassembling and reassembling machinery, overhauling gearboxes, replacing bearings/bushings/etc., • Read blueprints, schematics, and diagrams to determine the method and sequence of assembly of a part, machine, or piece of equipment., • Expedite the reentry of down equipment within a manufacturing environment to working conditions., • Repair and calibrate hydraulic and pneumatic assemblies., • Test the performance of electro-mechanical assemblies using test instruments such as multi-meters, volt, and amp meters., • Install electronic parts and hardware, using soldering equipment and hand tools., • Operate, test, program, and maintain complete manufacturing lines such as beverage filling machines, conveyors, and palletizers., • Source parts from vendors when parts are unavailable or have long lead times; order parts in a timely manner to ensure equipment reliability., • Maintain Maintenance Inventory System to ensure accurate inventories., • Communicate effectively between shifts and other departments, including the status of equipment to supervisors/coworkers at end of the shift as well as logbook documentation., • Responsible for complying with GMP’s, SOP’s, corporate and/or plant policies, rules, and regulations., • Responsible for following OEM manuals and executing accurate and precise procedures according to those manuals., • Aids and supports to all areas in the production facility as assigned by supervisor/lead., • Responsible for gaining competence online circuits and learning proper hookups are made in the facility., • Cover breaks and lunches and other staffing needs as assigned by their supervisor/lead., • Compliant with all legal requirements concerning dairy processing and safety on their assigned shift and reports concerning their supervisor/lead., • Work in a safe manner and reports safety concerns promptly to their supervisor/lead and take corrective actions as necessary to ensure a safe environment., • Responsible for reporting food safety problems and initiating action and for supporting SQF by maintaining food safety and food quality., • Ensure work areas are sanitary and strictly adhere to sanitation practices., • Ability to apply basic to complex mathematical concepts such as adding, counting, subtracting, multiplying, dividing, and knowledge of weights and measure, to sufficiently handle job tasks., • Understand and respond appropriately to basic and complex, employee, vendor, and customer inquiries., • Knowledge of and Skilled in the use of Root Cause Analysis, Troubleshooting methodology, 5S, and Lean Manufacturing concepts., • Knowledge of OSHA general safety regulations; PPE, energy control, confined space, chemical safety, fall protection., • Knowledge of boilers, ammonia refrigeration, steam, air compressors, HVAC, sprinkler systems, and electrical systems., • Skills at a mastery level in at least one area of Maintenance including electrical fabrication, refrigeration, welding, controls programming, etc., • Advanced knowledge of common wear points on equipment and follow manufacturer lubrication recommendations., • Have a disciplined aptitude for repair and uptime urgency., • Own an extensive variety of quality tools including SAE and Metric, to perform mechanical repairs on automation equipment., • Read, write, and communicate using the English language sufficient to perform job functions (Other preferences will be given for special language skills when there is a business need)., • Knowledge of the company's mission, purpose, goals, and your role in achieving each of them., • Ability to operate facility equipment as required in assigned area., • Satisfactorily complete all company training requirements., • Minimum GED or High School diploma is highly preferred., • Minimum 3-5 years’ experience within a mechanical automation field, • Technical trade, military training, or technical college strongly preferred., • Experience with VFD’s, conveyors, pumps, pneumatic sanitary valves, as well as pneumatic and hydraulic systems, • Experience with programmable logic controllers, instruments, and controls, • Experience with closed cooling systems, including evaporator towers, water cooling towers, and chillers., • Experience working in a food manufacturing environment preferred., • Responsible for reporting to work at scheduled times and communicating tardiness and absences with the assigned Supervisor/Manager prior to the occurrence., • Responsible for reporting to work in a condition to work., • Responsible for being well-groomed and dressed in a business-and position-appropriate attire at all times including ensuring compliance with GMP dress code standards., • Comply with performance criteria, standards of conduct as contained in company policy, employment procedures, and responsibilities as described in the company handbook., • Maintain a safe work environment at all times and immediately report and take appropriate action to correct a safety concern., • Requires morning, afternoon, and overnight availability any day of the week based on the assigned shift., • Requests to be scheduled off for a specific day require advance notification and approval by the Supervisor/Manager., • Normally protected from weather and temperature changes, possible exposure to hot cold wet, humid, or windy weather conditions does exist., • May be subject to exposure to ingredients used in the manufacture of food products including allergens., • Ability to move throughout all areas of the facility including but not limited to office, production, and warehouse environments. Including the outside perimeter of the building., • Able to wear all necessary personal protective equipment to perform job functions., • Stand and/or sit continuously and perform job functions for a full shift with meal break., • Physically able to stand, bend, stoop, kneel, reach, twist, lift, push, pull, climb, balance, crouch, handle and move items weighing up to 50 pounds without assistance and move objects exceeding 50 pounds with reasonable accommodations.

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and support services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay The Fire & Security Service Technician has the ability to program, calibrate, check, test and service access control, CCTV, burglar alarm and fire alarm installations in commercial facilities. What we are looking for: • 1 year of experience with configuring, programming, and checking out security installations., • 1 year experience understanding access control and fire alarm wiring diagram ms and best practices., • 1 year experience with Access Control, CCTV, Burglar Alarm and Fire Alarm systems, especially AccessXpert, Pelco, Axis, VideoXpert, Security Expert, DMP, Notifier, Andover Continuum., • Strong Ethernet networking skills., • MS Office Suite experience., • Strong computer skills., • Basic low voltage electrical testing skills FASA/BASA Certification. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job Description CNC Programmer 1st Shift Hours TBD $20 - $28 per hour DOE Job Duties • Creates medium to high complexity CNC programs using three axis CAM software, • Stores and maintains programs with Living History, • Provides CAM support, downloads programs to CNC controls, makes initial set up, obtains first piece approval, and turns over production of part to operator, • Optimize programs for speed of machine time and improved quality, • Diagnoses, analyzes, and troubleshoots programs, • A.AS in Mechanical technologies or equivalent, • Demonstrates ability to program and machine complex geometries, • Four years of CNC programming experience preferred, • Must have superior computer programming skills, • Problem solving skills, • Time management skills, • Organizational skills

Job Description Audit Manager Key Responsibilities • Plan and manage audit engagements and related projects, including reviewing workpapers and financial statements in accordance with standards., • Supervise, mentor, and develop engagement team members, providing leadership and career guidance., • Maintain and develop strong client relationships across various engagements., • Oversee engagement workflow, team resources, and billing and collections., • Conduct research to enhance technical knowledge and develop expertise., • Identify and recommend opportunities for growth and expansion., • Apply critical thinking in audit procedures based on risk and evaluating evidence. Requirements • Minimum of a Bachelors degree in accounting., • CPA license is required., • 5+ years prior work experience in public accounting required, • Prior significant supervisory experience, • Possess executive presence - need to be able to be primary contact for the client, prepare and present presentations to clients and potential clients, • Possess client development/relationship-building skills Spartan Placements is an equal opportunity employer. All terms and conditions of employment, including, but not limited to, recruitment, placement, title, promotion, compensation, benefits, transfers, training, education, research, administration and programming, will be administered without regard to race, color, religion, sex, age, sexual orientation, national origin or ancestry, handicap, or status as a disabled veteran.

Job Description The Summer Program Coordinator oversees the daily operations, planning, and implementation of summer programs, for youth ages 11-17, with an emphasis on enrichment and outdoor activities. They are responsible for program scheduling, staff supervision, and ensuring a safe and engaging environment for participants. Key Responsibilities: * Program Planning and Implementation: Develop and implement engaging summer programs, including daily schedules, activities, and special events. * Staff Supervision and Training: Oversee and support summer staff, providing training, guidance, and mentorship. * Participant Management: Ensure the safety and well-being of program participants, addressing any issues or concerns. * Logistical Support: Manage program logistics, including scheduling, supplies, and facilities. * Communication and Coordination: Communicate with participants, parents, staff, and other stakeholders, ensuring clear and timely information. Key tasks: • Designing and implementing recreational activities: May include sports, games, arts and crafts, and field trips., • Supervising on-site events and programs: Ensuring activities are running smoothly and safely., • Assisting with scheduling and registration: Managing program enrollment and ensuring accurate records., • Working with teachers and directors to develop lesson plans: Ensuring academic programs meet curriculum goals., • Strong organizational and communication skills, • Experience in youth programming: demonstrate knowledge of age-appropriate activities and safety procedures., • Ability to work independently and as part of a team: Essential for managing program operations and collaborating with staff., • AAS in Human Services or a related field; BA/BS preferred or five (5) years of supervisory experience working with youth ages 14+, from the inner-city. Company DescriptionNon-profit that works with children and families dealing with unaddressed trauma induced by neighborhood conflict.Non-profit that works with children and families dealing with unaddressed trauma induced by neighborhood conflict.

Job DescriptionDirect Hire Machine Shop ManagerPay: $70,000-$90,000 annuallyHours: 6 a.m.- to be determined Staffworks is seeking a reliable Machine Shop Manager to join their award-winning team! What's in it for you?Direct Hire OpportunityGreat Salary Machine Shop Manager Details: • Plans and directs production to obtain maximum utilization of assigned employees and materials and to ensure on time shipment of parts meeting customer’s specifications, • Coordinates supply of raw materials, and perishable tools, • Revising working practices and observes employees to ensure compliance with standards, • Inspects equipment to ensure specific operational performance, • Coordinates repairs and preventive maintenance with Maintenance personnel to ensure minimum downtime., • Informs General Manager of employee problems that require his/her attention and the disposition of resolved minor problems, • Provides hands on departmental instruction and training, • Follows company’s performance appraisal policy and recommends merit increases, promotions, transfers and other personnel actions for assigned personnel.Machine Shop Manager Requirements, • High school graduate or equivalent., • A.S. in Mechanical technology or B.S. degree in engineering with a focus on particular process, • Supervisory experience in a manufacturing company specializing in CNC machining, • Technical experience in CNC machining/programming preferred., • Strong oral and written communication skills, • Computer literacy including Word, Excel, email, and Outlook., • Familiarity with an ERP system such as Syteline or SAP etc., • Five (5) years of production management experience

Job DescriptionDescription: Pay rate: $18-$25 / hour OVERALL RESPONSIBILITY: Machine Operator is responsible for the manufacturing of various parts and assemblies using raw material, tools, machinery, and other various equipment. Parts and assemblies are built according to detailed prints. This role ensures the efficient and safe production of product components while maintaining quality standards and adhering to company safety policies. ACCOUNTABILITIES: • Operate various machines such as press brakes, CNC Mills, Lathes, Plasma Table to fabricate components., • Welding experience not required but is a plus., • Monitor machine operations to detect malfunctions or deviations from specifications and make necessary adjustments., • Read and understand detailed engineering drawings., • Gather, prepare, cut, roll, bend, weld, and/or assemble raw material to produce parts as detailed on mechanical drawings., • Ensure all quality standards are met including proper fit and alignment, verifying dimensions, and performing any necessary testing., • Maintain and follow a production schedule to deliver parts on time., • Follow all standard work instructions., • Document work and results as specified., • Adhere to all safety guidelines and safe working practices., • Perform other duties as assigned. Requirements: QUALIFICATIONS (Education, Certifications and Required Experience): • Required: High School Diploma or GED, • Strong mechanical aptitude, • Ability to read and understand detailed engineering drawings., • 1-2 years metal fabrication experience, • Accountability – Takes personal responsibility for the quality and timeliness of work and achieves results with little oversight., • Initiative – Identifying what needs to be done and doing it before being asked or before the situation requires it., • Results Oriented- The ability to focus on a desired result, setting challenging goals, focus effort on the goals, meeting or exceeding the goals., • Thoroughness – Ensuring work and information is complete and accurate. PHYSICAL REQUIREMENTS: • Bending/Stooping - Bending body downward and forward by bending spine at the waist. Full motion of the body, lower extremities, and back muscles., • Heavy Work - Must be able to exert up to 100 pounds occasionally and 50 pounds frequently. Frequent standing and walking., • Lifting - Raising objects from a lower to a higher position or moving objects. Requires substantial use of upper extremities and back muscles., • Kneeling - Bending legs at knees to come to a rest on one or both knees., • Noise - The worker is subject to noise on a regular basis and shouting may be required to be heard above noise level and hearing protection., • Repetitive Motion - Substantial movement/motion of the wrists, hands and or fingers., • Vision – Visual acuity is required to operate mechanical or skilled trades.

Job DescriptionDescription: The Direct Support Professional – Community Habilitation/Respite is responsible to implement and monitor individualized habilitation plans, in compliance with state, federal and Agency regulations and operating standards. The DSP works directly with individuals with Autism Spectrum Disorder (ASD) providing habilitative (skill building) and behavioral support. The DSP will work to increase skill level and decrease challenging behaviors of individuals with autism by addressing goals outlined in their individual goal plan. The DSP will provide services within the person’s home and in their community in order to promote independence, inclusion and quality of life. ESSENTIAL RESPONSIBILITIES Activities include but are not limited to the following: • Implement, document, and/or summarize programming as indicated in the individuals Person Centered Plan., • Respond to medical emergencies and log any/all incidents that may occur during sleeping hours., • Attend to personal, self-care and other program needs that the individuals cannot independently accomplish., • Oversee the safety and well-being of the individuals., • Advise nursing staff regarding the individuals’ medical and dietary concerns, dispense medication, if certified., • Participate in activities as part of the treatment team that may include meetings, trainings and committees., • Transport and accompany residences as requires for appointments and community activities., • Assist in the daily housekeeping and laundry routine, report house damage and complete work orders; clean wheelchairs, clean and gas-up vans, as needed., • Maintain documentation as required., • Ensure that all doors have been locked during overnight hours;, • Ensure an appropriate temperature in the house for sleeping by adjusting the thermostat and/or closing windows., • Conduct evacuation drills as assigned and complete documentation required., • Establish a work environment that creates positive communication between supervisors and employees and assimilates new employees to the Center’s culture, values and mission., • Ability to lift and/or assist individuals in your care and the ability to meet the physical requirements of the specific job., • Ability to walk, bend, squat., • Climb and descend stairs., • Must be able to sit or stand for long periods of time. Must be able to move and react quickly., • Must possess the ability to make independent decisions when circumstances are warranted, • Must be able to manage and cope in sometimes stressful situations., • Must have full sight and hearing with fluency in the English Language., • Ability to lift up to 60 pounds. Job related tasks may involve exposure to blood, body fluids, tissue or the potential for skin or mucous membrane contact from spills or splashes of these substances. May have exposure to unpredictable individuals and situations when working at Kelberman Center sites. OSHA Exposure Category 1 The above job description is meant to describe the general nature and level of work being performed; it is not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required for the position. This job description may be changed at any time and does not constitute a contract or agreement. Requirements: EDUCATIONAL REQUIREMENTS / QUALIFICATIONS / EXPERIENCE • High School Diploma or equivalent preferred., • Up to 1 year of experience., • This position has regular and substantial unsupervised or unrestricted physical contact with individuals receiving services, therefore, is required to be fingerprinted for a criminal history record check under OPWDD (Office for People with Developmental Disabilities)., • Must have a valid New York State Driver’s License. and transportation for your use during work hours., • Must possess the ability to make independent decisions when circumstances are warranted., • Maintain professional boundaries and confidentiality., • Regularly attend scheduled shifts and meetings, being punctual.

Job Description The Source Inspector, (SI) is responsible for performing inspection operations of in-process or completed hardware, including dimensional, and visual inspection. The source inspection may include reviewing all paperwork relating to the product at hand. This includes operations such as Final Inspection, Receiving Inspection, Outside processing, and Assembly. The SI will also verify FAI’s to AS9102 for accuracy and completeness. The SI must be familiar with hand tools and gaging techniques. The SI will also be fluent in B/P interpretation and GD&T. Source Inspection will occur at end customer’s suppliers’ location. The SI will travel to these locations. Job Functions: • Experienced quality individual in dimensional and visual inspection of aerospace machined components, • Experience in performing FAI’s – AS9102 (The SI will verify supplier’s FAI, not perform them), • Experience with hand measurement tools, • Knowledge of CMM Inspection process (Knowledge of CMM Programming is not required), • Knowledge and experience in GD&T (ASME Y14.5), • Knowledge and experience with blueprint interpretation, • Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection), • Experienced quality individual in dimensional inspection of aerospace machined components, • Experience in performing FAI’s – AS9102, • Experience with hand measurement tools, • Knowledge of CMM Inspection process (Knowledge of CMM Programming is not required), • Knowledge and experience in GD&T (ASME Y14.5), • Knowledge and experience with blueprint interpretation, • Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection), • MS Outlook, and EXCEL experience, • Mechanical inspection experience preferred, • Strong verbal, written and communication skills, • Fluent English – reading and writing is required, • Professionalism, integrity, and exceptional attention to detail, • Strong independent decision-making skills; excellent analytical skills and professional judgment, • Excellent interpersonal, written, and verbal communication skills, • Work as an effective team member, • Establish and maintain effective working relationships, • Fluent English – reading and writing is required, • Pass pre-hire background check including DMV and credit screening, • Pass Pre-hire Drug Screening, • The work is performed under general supervision, • Valid drivers' license and auto insurance required, • 3+ years’ experience as a quality inspector, technician, or engineer., • 3+ years’ experience in an aerospace manufacturing facility, • 3+ years’ experience in inspection duties, FAI’s GD&T, and b/p interpretation, • Proficient with Microsoft Outlook and Excel, • Effective communication skills, • Detail oriented, • Any combination of education and experience may be considered BENEFITS: • 12 days paid vacation first year, increasing with service years, • 10 days paid sick time, • 11 paid holidays, • Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents, • Champ Plan Wellness and Health, • Free to employees working minimum 20 hours/week with anticipated $30k/annual earnings, • Participation increases net take home pay $$$ in most instances, • Free wellness initiatives, • Free tele-health, • Free and discounted RX, • Auto enrollment (unless tax elections result in negative impact), • Eligible on the 1st of the month following 30 days of continuous employment, • requires monthly 10-minute wellness activity participation, • 401k retirement savings with match, • Eligible on the first (1st) of the month following 90 days of continuous employment, • 100% match of 1st 3% contribution, • 50% match of next 2% contribution, • IMMEDIATE VESTING, • Company-provided cell phone, laptop, mobile wi-fi (for business use only), • Regular Hourly rate for travel time, • Direct Pay Travel arrangements for flights, hotels and rental cars, • Travel Reimbursements direct deposited with each payroll, • Federal rate Mileage reimbursement (.70/mile 2025) when driving personal vehicles on company business, • Per diem reimbursements for meals and incidentals, • Overnight trips - Up to $75, • Leaving home after 4 pm $40, • $1500 EMPLOYEE REFERRAL BONUS, • Initial $750 paid upon hire of qualified referred employee (rehires excluded), • Additional $750 paid upon referral’s full completion of 90 days’ employment Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. Powered by JazzHR 73UI5oulNr

We are seeking 5 to 7 Special Education Teachers to support school-age classrooms serving students with intellectual and developmental disabilities, including a high percentage with Autism. Positions are Monday through Friday, 35 hours per week (8:00 AM 3:30 PM). Details: * Start as soon as available, ideally through the 20252026 school year or longer * Classroom ratio: 6 students with 3.5 staff per classroom * Caseload includes students ages 522 with significant intellectual and developmental disabilities * Work within a school-age classroom setting supporting students with a range of needs * Collaborate with team members to implement individualized programming * Maintain accurate documentation and comply with program requirements Requirements: * Valid Special Education certification * Experience working with students with Autism and developmental disabilities preferred Interview Process: * Interviews will be scheduled based on applicant and staff availability * Flexible interview times to accommodate schedules 35-55$ an hour depending on experience and qualifications. • Compensation & Benefits:, • Competitive weekly pay Health, dental, and vision insurance options * 401(k) retirement plan * Supportive recruiter assistance throughout the hiring process Apply NOW to join a passionate team making a real difference in students lives! For immediate consideration, contact Ella Maddox directly: ? Call or Text: 470-900-4891 ? Email: Compensation for this position ranges from $29.25 to $49.25. Eligible candidates may also receive healthcare benefits, housing, and meals/incidentals. Full details of our healthcare benefits plan can be found ___. This posting is open for 60 days after the posting date.

Consolidated Precision Products (CPP), an aerospace and defense manufacturing company, has an immediate need for a CNC Programmer to join our team! This is a 1st shift position at our plant in Chittenango, NY. This position is responsible for programming computer numerical control (CNC) machines to produce parts in accordance with detailed engineering drawings, customer and ISO Certifications. Blue-print reading experience is preferred in this position. The CNC Programmer will work with other CNC Machinists to effectively set up, run, program, and trouble shoot new and existing parts and production lots, as well as successfully detect malfunctions in machine operations. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Compensation $32.00 - $45.00 hourly JOB SUMMARY This position performs machine setups and manufactures machined parts and develops programs for computer based numerically (CNC) controlled machine shop equipment to perform standard metal cutting to meet customer requirements. ESSENTIAL JOB FUNCTIONS/DUTIES • Demonstrated ability to understand and work with advanced “shop” mathematical concepts., • High level of experience of all aspects of machine manufacturing. i.e.: 3, 4, 5 axis machines, material types, tooling, fixtures, fixture design, part holding techniques, and advanced CNC programming., • Excellent analytical and problem solving and resolution capability., • Enthusiasm, drive, and work ethic in an ‘on-time’ environment., • Ability to work with management, others within engineering, purchasing, and shop floor staff to complete estimates, provide feedback to improve processes, and resolve manufacturing issues., • Demonstrates a solid understanding of 3D modeling software., • Has the ability to create training materials and train shop floor employees., • Possesses creative thinking skills and is a detail-oriented personality., • Is able to communicate well to other members of the development team., • Eliminate waste and elevates productivity using Lean Manufacturing program., • Participate in the startup of new equipment., • Ability to cooperate; work effectively and professionally with all levels in the organization, both internal and external customers., • Adhere to AS9100 and ISO procedures and compliance, • Ensures all equipment controls are accurately defined and maintained., • Contributes to team effort by accomplishing related results as needed., • Responsible for adherence to all safety policies, practices and procedures., • Ability to work flexible hours and demonstrate reliability., • Education: High School or GED Diploma required - Associates Degree or Certification in related field preferred., • Experience: 3-5 years of experience with CNC Programming, and operation of CNC machines., • Knowledge of 3D modeling software and Gcode a must., • Familiar with Motion Control and Vision., • Decision Making and Problem Solving: Able to take action in solving problems with exhibiting judgment and a realistic understanding of issues., • Experience and skill in troubleshooting control systems., • Knowledge of GD&T practices, • Experienced in interpretation of technical drawings CPP-Syracuse is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Syracuse, as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. No Phone Call Please. This is a non-management position This is a full time position

Consolidated Precision Products (CPP), an aerospace and defense manufacturing company, has an immediate need for a CNC Programmer to join our team! This is a 1st shift position at our plant in Chittenango, NY. This position is responsible for programming computer numerical control (CNC) machines to produce parts in accordance with detailed engineering drawings, customer and ISO Certifications. Blue-print reading experience is preferred in this position. The CNC Programmer will work with other CNC Machinists to effectively set up, run, program, and trouble shoot new and existing parts and production lots, as well as successfully detect malfunctions in machine operations. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Compensation $32.00 - $45.00 hourly JOB SUMMARY This position performs machine setups and manufactures machined parts and develops programs for computer based numerically (CNC) controlled machine shop equipment to perform standard metal cutting to meet customer requirements. ESSENTIAL JOB FUNCTIONS/DUTIES • Demonstrated ability to understand and work with advanced “shop” mathematical concepts., • High level of experience of all aspects of machine manufacturing. i.e.: 3, 4, 5 axis machines, material types, tooling, fixtures, fixture design, part holding techniques, and advanced CNC programming., • Excellent analytical and problem solving and resolution capability., • Enthusiasm, drive, and work ethic in an ‘on-time’ environment., • Ability to work with management, others within engineering, purchasing, and shop floor staff to complete estimates, provide feedback to improve processes, and resolve manufacturing issues., • Demonstrates a solid understanding of 3D modeling software., • Has the ability to create training materials and train shop floor employees., • Possesses creative thinking skills and is a detail-oriented personality., • Is able to communicate well to other members of the development team., • Eliminate waste and elevates productivity using Lean Manufacturing program., • Participate in the startup of new equipment., • Ability to cooperate; work effectively and professionally with all levels in the organization, both internal and external customers., • Adhere to AS9100 and ISO procedures and compliance, • Ensures all equipment controls are accurately defined and maintained., • Contributes to team effort by accomplishing related results as needed., • Responsible for adherence to all safety policies, practices and procedures., • Ability to work flexible hours and demonstrate reliability., • Education: High School or GED Diploma required - Associates Degree or Certification in related field preferred., • Experience: 3-5 years of experience with CNC Programming, and operation of CNC machines., • Knowledge of 3D modeling software and Gcode a must., • Familiar with Motion Control and Vision., • Decision Making and Problem Solving: Able to take action in solving problems with exhibiting judgment and a realistic understanding of issues., • Experience and skill in troubleshooting control systems., • Knowledge of GD&T practices, • Experienced in interpretation of technical drawings CPP-Syracuse is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Syracuse, as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. No Phone Call Please. This is a non-management position This is a full time position

Consolidated Precision Products (CPP), an aerospace and defense manufacturing company, has an immediate need for a CNC Programmer to join our team! This is a 1st shift position at our plant in Chittenango, NY. This position is responsible for programming computer numerical control (CNC) machines to produce parts in accordance with detailed engineering drawings, customer and ISO Certifications. Blue-print reading experience is preferred in this position. The CNC Programmer will work with other CNC Machinists to effectively set up, run, program, and trouble shoot new and existing parts and production lots, as well as successfully detect malfunctions in machine operations. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Compensation $32.00 - $45.00 hourly JOB SUMMARY This position performs machine setups and manufactures machined parts and develops programs for computer based numerically (CNC) controlled machine shop equipment to perform standard metal cutting to meet customer requirements. ESSENTIAL JOB FUNCTIONS/DUTIES • Demonstrated ability to understand and work with advanced “shop” mathematical concepts., • High level of experience of all aspects of machine manufacturing. i.e.: 3, 4, 5 axis machines, material types, tooling, fixtures, fixture design, part holding techniques, and advanced CNC programming., • Excellent analytical and problem solving and resolution capability., • Enthusiasm, drive, and work ethic in an ‘on-time’ environment., • Ability to work with management, others within engineering, purchasing, and shop floor staff to complete estimates, provide feedback to improve processes, and resolve manufacturing issues., • Demonstrates a solid understanding of 3D modeling software., • Has the ability to create training materials and train shop floor employees., • Possesses creative thinking skills and is a detail-oriented personality., • Is able to communicate well to other members of the development team., • Eliminate waste and elevates productivity using Lean Manufacturing program., • Participate in the startup of new equipment., • Ability to cooperate; work effectively and professionally with all levels in the organization, both internal and external customers., • Adhere to AS9100 and ISO procedures and compliance, • Ensures all equipment controls are accurately defined and maintained., • Contributes to team effort by accomplishing related results as needed., • Responsible for adherence to all safety policies, practices and procedures., • Ability to work flexible hours and demonstrate reliability., • Education: High School or GED Diploma required - Associates Degree or Certification in related field preferred., • Experience: 3-5 years of experience with CNC Programming, and operation of CNC machines., • Knowledge of 3D modeling software and Gcode a must., • Familiar with Motion Control and Vision., • Decision Making and Problem Solving: Able to take action in solving problems with exhibiting judgment and a realistic understanding of issues., • Experience and skill in troubleshooting control systems., • Knowledge of GD&T practices, • Experienced in interpretation of technical drawings CPP-Syracuse is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Syracuse, as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. No Phone Call Please. This is a non-management position This is a full time position

If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPP and its subsidiaries may be the right fit for you! If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! CPP Syracuse is looking for a CMM Programmer to join our team! Major Responsibilities: • Ensure production goals and ship schedules are met, • Manage staffing levels and requirements, • Ensure team members remain productive, • Follow Leader Standard Work., • Able to set up and layout castings, wax tools, wax patterns, ceramic cores and gages using standard layout equipment including manual and programmable CMMs., • Responsible for CMM program development, modification and implementation in close association with Engineering., • Operate, program and document layout of various manufacturing metal castings Coordinate Measuring Machine (CMM), Blue light scanner, or other measuring equipment., • Understanding of Geometric Dimensioning and Tolerancing (GD&T)., • Interpret, read, download, and understand complex blue prints, CAD models and apply that understanding to interpret the results of layout inspection data., • Ability to accurately complete and train others to complete standard and customer specific layout forms and templates, • Responsible to review results, assess failures and anomalies resulting from measurement issues during the process to ensure layout results are accurate and validated, • Adhere to AS9100 and ISO procedures and compliance Education: Associate's degree (A. A.) or equivalent from two-year College or technical school; or a minimum of five years related experience and/or training; or the equivalent combination of education and work experience. Prefer degrees in engineering technologies. Software: Tecnomatix Quality software (3D programming), Atos professional (Blue Light), MeasureMax. Unigraphics Compensation Range: $105,000.00 - $130,000.00 Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: ___ CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a management position This is a full time position

If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPP and its subsidiaries may be the right fit for you! If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! CPP Syracuse is looking for a CMM Programmer to join our team! Major Responsibilities: • Ensure production goals and ship schedules are met, • Manage staffing levels and requirements, • Ensure team members remain productive, • Follow Leader Standard Work., • Able to set up and layout castings, wax tools, wax patterns, ceramic cores and gages using standard layout equipment including manual and programmable CMMs., • Responsible for CMM program development, modification and implementation in close association with Engineering., • Operate, program and document layout of various manufacturing metal castings Coordinate Measuring Machine (CMM), Blue light scanner, or other measuring equipment., • Understanding of Geometric Dimensioning and Tolerancing (GD&T)., • Interpret, read, download, and understand complex blue prints, CAD models and apply that understanding to interpret the results of layout inspection data., • Ability to accurately complete and train others to complete standard and customer specific layout forms and templates, • Responsible to review results, assess failures and anomalies resulting from measurement issues during the process to ensure layout results are accurate and validated, • Adhere to AS9100 and ISO procedures and compliance Education: Associate's degree (A. A.) or equivalent from two-year College or technical school; or a minimum of five years related experience and/or training; or the equivalent combination of education and work experience. Prefer degrees in engineering technologies. Software: Tecnomatix Quality software (3D programming), Atos professional (Blue Light), MeasureMax. Unigraphics Compensation Range: $105,000.00 - $130,000.00 Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: ___ CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a management position This is a full time position

If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPP and its subsidiaries may be the right fit for you! If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! CPP Syracuse is looking for a CMM Programmer to join our team! Major Responsibilities: • Ensure production goals and ship schedules are met, • Manage staffing levels and requirements, • Ensure team members remain productive, • Follow Leader Standard Work., • Able to set up and layout castings, wax tools, wax patterns, ceramic cores and gages using standard layout equipment including manual and programmable CMMs., • Responsible for CMM program development, modification and implementation in close association with Engineering., • Operate, program and document layout of various manufacturing metal castings Coordinate Measuring Machine (CMM), Blue light scanner, or other measuring equipment., • Understanding of Geometric Dimensioning and Tolerancing (GD&T)., • Interpret, read, download, and understand complex blue prints, CAD models and apply that understanding to interpret the results of layout inspection data., • Ability to accurately complete and train others to complete standard and customer specific layout forms and templates, • Responsible to review results, assess failures and anomalies resulting from measurement issues during the process to ensure layout results are accurate and validated, • Adhere to AS9100 and ISO procedures and compliance Education: Associate's degree (A. A.) or equivalent from two-year College or technical school; or a minimum of five years related experience and/or training; or the equivalent combination of education and work experience. Prefer degrees in engineering technologies. Software: Tecnomatix Quality software (3D programming), Atos professional (Blue Light), MeasureMax. Unigraphics Compensation Range: $105,000.00 - $130,000.00 Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: ___ CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a management position This is a full time position

⚡Join Our Growing Team as an Industrial Electrician at Superior Metals Manufacturing!⚡ Job Summary: Are you looking for your next challenge? Join us as an Industrial Electrician and become an intricate part of our success. In this dynamic role, you’ll tackle exciting challenges by inspecting, maintaining, and troubleshooting high-voltage systems and production equipment. With your electrical expertise and hands-on skills, you'll ensure everything runs smoothly and safely. You'll work with cutting-edge technology and engage in innovative electronic system development—all while being part of a fast-growing company. If you love solving problems and thrive in a fast-paced environment, this is the perfect opportunity for you! Essential Job Functions: • Inspect, maintain, and repair our plant-wide production equipment to keep everything running smoothly., • Work hands-on with 480V 3-phase electrical power distribution systems—let’s keep the lights on!, • Apply your electrical theory knowledge and troubleshooting to tackle any issues that arise., • Dive into machine instrumentation and electrical controls, keeping our systems sharp and efficient., • Handle high voltage systems and equipment like a pro., • Get acquainted with hydraulic and pneumatic systems—your toolbox just got a little bigger!, • Utilize PLC controls and Ladder Logic Programming to enhance our automation processes., • Read and interpret electrical and hydraulic schematics and plant drawings like a map to success., • Assemble, install, test, and maintain electrical and electronic fixtures using your trusty hand and power tools., • Perform preventative maintenance tasks to keep our production equipment in top shape., • Diagnose malfunctioning systems with your keen troubleshooting skills and test equipment., • Ensure safety and continuity in our electrical systems using ohmmeters and voltmeters., • Inspect electrical systems for hazards and compliance—safety first!, • Engage in the exciting world of electronic system development, including the design and repair of controllers, timers, drives, and switches., • Education: High school diploma or GED., • Experience: 5+ years in industrial maintenance/electrical experience., • Certifications: Electrical training or certification preferred; NFPA Certified Electrical Safety Technician (NFPA 70E) is a plus., • Skills: HVAC knowledge, robotic experience, and familiarity with computer networks are preferred., • Language Skills: Ability to read and interpret safety rules, operating instructions, and maintenance manuals, as well as communicate effectively with colleagues and vendors., • Mathematical Skills: Proficient in basic math operations—adding, subtracting, and working with fractions and decimals., • Reasoning Ability: Capable of solving practical problems and interpreting various types of instructions., • Attractive Benefits Package: Enjoy a quarterly bonus, comprehensive medical, dental, and vision coverage, a 401(k) plan, company-paid life insurance, and more!, • Competitive Pay: $25 - $45 per hour, with potential to make more based on your experience, education and shift. We also have available overtime., • New Facility: Work in our brand-new, cutting-edge manufacturing environment. SMM is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. SMM as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at SMM. #IndustrialElectrician #ElectricianJobs #Innovation #VETS #Manufacturing #Millwright This is a non-management position This is a full time position

⚡Join Our Growing Team as an Industrial Electrician at Superior Metals Manufacturing!⚡ Job Summary: Are you looking for your next challenge? Join us as an Industrial Electrician and become an intricate part of our success. In this dynamic role, you’ll tackle exciting challenges by inspecting, maintaining, and troubleshooting high-voltage systems and production equipment. With your electrical expertise and hands-on skills, you'll ensure everything runs smoothly and safely. You'll work with cutting-edge technology and engage in innovative electronic system development—all while being part of a fast-growing company. If you love solving problems and thrive in a fast-paced environment, this is the perfect opportunity for you! Essential Job Functions: • Inspect, maintain, and repair our plant-wide production equipment to keep everything running smoothly., • Work hands-on with 480V 3-phase electrical power distribution systems—let’s keep the lights on!, • Apply your electrical theory knowledge and troubleshooting to tackle any issues that arise., • Dive into machine instrumentation and electrical controls, keeping our systems sharp and efficient., • Handle high voltage systems and equipment like a pro., • Get acquainted with hydraulic and pneumatic systems—your toolbox just got a little bigger!, • Utilize PLC controls and Ladder Logic Programming to enhance our automation processes., • Read and interpret electrical and hydraulic schematics and plant drawings like a map to success., • Assemble, install, test, and maintain electrical and electronic fixtures using your trusty hand and power tools., • Perform preventative maintenance tasks to keep our production equipment in top shape., • Diagnose malfunctioning systems with your keen troubleshooting skills and test equipment., • Ensure safety and continuity in our electrical systems using ohmmeters and voltmeters., • Inspect electrical systems for hazards and compliance—safety first!, • Engage in the exciting world of electronic system development, including the design and repair of controllers, timers, drives, and switches., • Education: High school diploma or GED., • Experience: 5+ years in industrial maintenance/electrical experience., • Certifications: Electrical training or certification preferred; NFPA Certified Electrical Safety Technician (NFPA 70E) is a plus., • Skills: HVAC knowledge, robotic experience, and familiarity with computer networks are preferred., • Language Skills: Ability to read and interpret safety rules, operating instructions, and maintenance manuals, as well as communicate effectively with colleagues and vendors., • Mathematical Skills: Proficient in basic math operations—adding, subtracting, and working with fractions and decimals., • Reasoning Ability: Capable of solving practical problems and interpreting various types of instructions., • Attractive Benefits Package: Enjoy a quarterly bonus, comprehensive medical, dental, and vision coverage, a 401(k) plan, company-paid life insurance, and more!, • Competitive Pay: $25 - $45 per hour, with potential to make more based on your experience, education and shift. We also have available overtime., • New Facility: Work in our brand-new, cutting-edge manufacturing environment. SMM is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. SMM as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at SMM. #IndustrialElectrician #ElectricianJobs #Innovation #VETS #Manufacturing #Millwright This is a non-management position This is a full time position

If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPP and its subsidiaries may be the right fit for you! If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! CPP Syracuse is looking for a CMM Programmer to join our team! Major Responsibilities: • Ensure production goals and ship schedules are met, • Manage staffing levels and requirements, • Ensure team members remain productive, • Follow Leader Standard Work., • Able to set up and layout castings, wax tools, wax patterns, ceramic cores and gages using standard layout equipment including manual and programmable CMMs., • Responsible for CMM program development, modification and implementation in close association with Engineering., • Operate, program and document layout of various manufacturing metal castings Coordinate Measuring Machine (CMM), Blue light scanner, or other measuring equipment., • Understanding of Geometric Dimensioning and Tolerancing (GD&T)., • Interpret, read, download, and understand complex blue prints, CAD models and apply that understanding to interpret the results of layout inspection data., • Ability to accurately complete and train others to complete standard and customer specific layout forms and templates, • Responsible to review results, assess failures and anomalies resulting from measurement issues during the process to ensure layout results are accurate and validated, • Adhere to AS9100 and ISO procedures and compliance Education: Associate's degree (A. A.) or equivalent from two-year College or technical school; or a minimum of five years related experience and/or training; or the equivalent combination of education and work experience. Prefer degrees in engineering technologies. Software: Tecnomatix Quality software (3D programming), Atos professional (Blue Light), MeasureMax. Unigraphics Compensation Range: $105,000.00 - $130,000.00 Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: ___ CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a management position This is a full time position

Consolidated Precision Products (CPP), an aerospace and defense manufacturing company, has an immediate need for a CNC Programmer to join our team! This is a 1st shift position at our plant in Chittenango, NY. This position is responsible for programming computer numerical control (CNC) machines to produce parts in accordance with detailed engineering drawings, customer and ISO Certifications. Blue-print reading experience is preferred in this position. The CNC Programmer will work with other CNC Machinists to effectively set up, run, program, and trouble shoot new and existing parts and production lots, as well as successfully detect malfunctions in machine operations. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Compensation $32.00 - $45.00 hourly JOB SUMMARY This position performs machine setups and manufactures machined parts and develops programs for computer based numerically (CNC) controlled machine shop equipment to perform standard metal cutting to meet customer requirements. ESSENTIAL JOB FUNCTIONS/DUTIES • Demonstrated ability to understand and work with advanced “shop” mathematical concepts., • High level of experience of all aspects of machine manufacturing. i.e.: 3, 4, 5 axis machines, material types, tooling, fixtures, fixture design, part holding techniques, and advanced CNC programming., • Excellent analytical and problem solving and resolution capability., • Enthusiasm, drive, and work ethic in an ‘on-time’ environment., • Ability to work with management, others within engineering, purchasing, and shop floor staff to complete estimates, provide feedback to improve processes, and resolve manufacturing issues., • Demonstrates a solid understanding of 3D modeling software., • Has the ability to create training materials and train shop floor employees., • Possesses creative thinking skills and is a detail-oriented personality., • Is able to communicate well to other members of the development team., • Eliminate waste and elevates productivity using Lean Manufacturing program., • Participate in the startup of new equipment., • Ability to cooperate; work effectively and professionally with all levels in the organization, both internal and external customers., • Adhere to AS9100 and ISO procedures and compliance, • Ensures all equipment controls are accurately defined and maintained., • Contributes to team effort by accomplishing related results as needed., • Responsible for adherence to all safety policies, practices and procedures., • Ability to work flexible hours and demonstrate reliability., • Education: High School or GED Diploma required - Associates Degree or Certification in related field preferred., • Experience: 3-5 years of experience with CNC Programming, and operation of CNC machines., • Knowledge of 3D modeling software and Gcode a must., • Familiar with Motion Control and Vision., • Decision Making and Problem Solving: Able to take action in solving problems with exhibiting judgment and a realistic understanding of issues., • Experience and skill in troubleshooting control systems., • Knowledge of GD&T practices, • Experienced in interpretation of technical drawings CPP-Syracuse is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Syracuse, as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. No Phone Call Please. This is a non-management position This is a full time position

Consolidated Precision Products (CPP), an aerospace and defense manufacturing company, has an immediate need for a CNC Programmer to join our team! This is a 1st shift position at our plant in Chittenango, NY. This position is responsible for programming computer numerical control (CNC) machines to produce parts in accordance with detailed engineering drawings, customer and ISO Certifications. Blue-print reading experience is preferred in this position. The CNC Programmer will work with other CNC Machinists to effectively set up, run, program, and trouble shoot new and existing parts and production lots, as well as successfully detect malfunctions in machine operations. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Compensation $32.00 - $45.00 hourly JOB SUMMARY This position performs machine setups and manufactures machined parts and develops programs for computer based numerically (CNC) controlled machine shop equipment to perform standard metal cutting to meet customer requirements. ESSENTIAL JOB FUNCTIONS/DUTIES • Demonstrated ability to understand and work with advanced “shop” mathematical concepts., • High level of experience of all aspects of machine manufacturing. i.e.: 3, 4, 5 axis machines, material types, tooling, fixtures, fixture design, part holding techniques, and advanced CNC programming., • Excellent analytical and problem solving and resolution capability., • Enthusiasm, drive, and work ethic in an ‘on-time’ environment., • Ability to work with management, others within engineering, purchasing, and shop floor staff to complete estimates, provide feedback to improve processes, and resolve manufacturing issues., • Demonstrates a solid understanding of 3D modeling software., • Has the ability to create training materials and train shop floor employees., • Possesses creative thinking skills and is a detail-oriented personality., • Is able to communicate well to other members of the development team., • Eliminate waste and elevates productivity using Lean Manufacturing program., • Participate in the startup of new equipment., • Ability to cooperate; work effectively and professionally with all levels in the organization, both internal and external customers., • Adhere to AS9100 and ISO procedures and compliance, • Ensures all equipment controls are accurately defined and maintained., • Contributes to team effort by accomplishing related results as needed., • Responsible for adherence to all safety policies, practices and procedures., • Ability to work flexible hours and demonstrate reliability., • Education: High School or GED Diploma required - Associates Degree or Certification in related field preferred., • Experience: 3-5 years of experience with CNC Programming, and operation of CNC machines., • Knowledge of 3D modeling software and Gcode a must., • Familiar with Motion Control and Vision., • Decision Making and Problem Solving: Able to take action in solving problems with exhibiting judgment and a realistic understanding of issues., • Experience and skill in troubleshooting control systems., • Knowledge of GD&T practices, • Experienced in interpretation of technical drawings CPP-Syracuse is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Syracuse, as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. No Phone Call Please. This is a non-management position This is a full time position

If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPP and its subsidiaries may be the right fit for you! If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! CPP Syracuse is looking for a CMM Programmer to join our team! Major Responsibilities: • Ensure production goals and ship schedules are met, • Manage staffing levels and requirements, • Ensure team members remain productive, • Follow Leader Standard Work., • Able to set up and layout castings, wax tools, wax patterns, ceramic cores and gages using standard layout equipment including manual and programmable CMMs., • Responsible for CMM program development, modification and implementation in close association with Engineering., • Operate, program and document layout of various manufacturing metal castings Coordinate Measuring Machine (CMM), Blue light scanner, or other measuring equipment., • Understanding of Geometric Dimensioning and Tolerancing (GD&T)., • Interpret, read, download, and understand complex blue prints, CAD models and apply that understanding to interpret the results of layout inspection data., • Ability to accurately complete and train others to complete standard and customer specific layout forms and templates, • Responsible to review results, assess failures and anomalies resulting from measurement issues during the process to ensure layout results are accurate and validated, • Adhere to AS9100 and ISO procedures and compliance Education: Associate's degree (A. A.) or equivalent from two-year College or technical school; or a minimum of five years related experience and/or training; or the equivalent combination of education and work experience. Prefer degrees in engineering technologies. Software: Tecnomatix Quality software (3D programming), Atos professional (Blue Light), MeasureMax. Unigraphics Compensation Range: $105,000.00 - $130,000.00 Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: ___ CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a management position This is a full time position

⚡Join Our Growing Team as an Industrial Electrician at Superior Metals Manufacturing!⚡ Job Summary: Are you looking for your next challenge? Join us as an Industrial Electrician and become an intricate part of our success. In this dynamic role, you’ll tackle exciting challenges by inspecting, maintaining, and troubleshooting high-voltage systems and production equipment. With your electrical expertise and hands-on skills, you'll ensure everything runs smoothly and safely. You'll work with cutting-edge technology and engage in innovative electronic system development—all while being part of a fast-growing company. If you love solving problems and thrive in a fast-paced environment, this is the perfect opportunity for you! Essential Job Functions: • Inspect, maintain, and repair our plant-wide production equipment to keep everything running smoothly., • Work hands-on with 480V 3-phase electrical power distribution systems—let’s keep the lights on!, • Apply your electrical theory knowledge and troubleshooting to tackle any issues that arise., • Dive into machine instrumentation and electrical controls, keeping our systems sharp and efficient., • Handle high voltage systems and equipment like a pro., • Get acquainted with hydraulic and pneumatic systems—your toolbox just got a little bigger!, • Utilize PLC controls and Ladder Logic Programming to enhance our automation processes., • Read and interpret electrical and hydraulic schematics and plant drawings like a map to success., • Assemble, install, test, and maintain electrical and electronic fixtures using your trusty hand and power tools., • Perform preventative maintenance tasks to keep our production equipment in top shape., • Diagnose malfunctioning systems with your keen troubleshooting skills and test equipment., • Ensure safety and continuity in our electrical systems using ohmmeters and voltmeters., • Inspect electrical systems for hazards and compliance—safety first!, • Engage in the exciting world of electronic system development, including the design and repair of controllers, timers, drives, and switches., • Education: High school diploma or GED., • Experience: 5+ years in industrial maintenance/electrical experience., • Certifications: Electrical training or certification preferred; NFPA Certified Electrical Safety Technician (NFPA 70E) is a plus., • Skills: HVAC knowledge, robotic experience, and familiarity with computer networks are preferred., • Language Skills: Ability to read and interpret safety rules, operating instructions, and maintenance manuals, as well as communicate effectively with colleagues and vendors., • Mathematical Skills: Proficient in basic math operations—adding, subtracting, and working with fractions and decimals., • Reasoning Ability: Capable of solving practical problems and interpreting various types of instructions., • Attractive Benefits Package: Enjoy a quarterly bonus, comprehensive medical, dental, and vision coverage, a 401(k) plan, company-paid life insurance, and more!, • Competitive Pay: $25 - $45 per hour, with potential to make more based on your experience, education and shift. We also have available overtime., • New Facility: Work in our brand-new, cutting-edge manufacturing environment. SMM is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. SMM as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at SMM. #IndustrialElectrician #ElectricianJobs #Innovation #VETS #Manufacturing #Millwright This is a non-management position This is a full time position

⚡Join Our Growing Team as an Industrial Electrician at Superior Metals Manufacturing!⚡ Job Summary: Are you looking for your next challenge? Join us as an Industrial Electrician and become an intricate part of our success. In this dynamic role, you’ll tackle exciting challenges by inspecting, maintaining, and troubleshooting high-voltage systems and production equipment. With your electrical expertise and hands-on skills, you'll ensure everything runs smoothly and safely. You'll work with cutting-edge technology and engage in innovative electronic system development—all while being part of a fast-growing company. If you love solving problems and thrive in a fast-paced environment, this is the perfect opportunity for you! Essential Job Functions: • Inspect, maintain, and repair our plant-wide production equipment to keep everything running smoothly., • Work hands-on with 480V 3-phase electrical power distribution systems—let’s keep the lights on!, • Apply your electrical theory knowledge and troubleshooting to tackle any issues that arise., • Dive into machine instrumentation and electrical controls, keeping our systems sharp and efficient., • Handle high voltage systems and equipment like a pro., • Get acquainted with hydraulic and pneumatic systems—your toolbox just got a little bigger!, • Utilize PLC controls and Ladder Logic Programming to enhance our automation processes., • Read and interpret electrical and hydraulic schematics and plant drawings like a map to success., • Assemble, install, test, and maintain electrical and electronic fixtures using your trusty hand and power tools., • Perform preventative maintenance tasks to keep our production equipment in top shape., • Diagnose malfunctioning systems with your keen troubleshooting skills and test equipment., • Ensure safety and continuity in our electrical systems using ohmmeters and voltmeters., • Inspect electrical systems for hazards and compliance—safety first!, • Engage in the exciting world of electronic system development, including the design and repair of controllers, timers, drives, and switches., • Education: High school diploma or GED., • Experience: 5+ years in industrial maintenance/electrical experience., • Certifications: Electrical training or certification preferred; NFPA Certified Electrical Safety Technician (NFPA 70E) is a plus., • Skills: HVAC knowledge, robotic experience, and familiarity with computer networks are preferred., • Language Skills: Ability to read and interpret safety rules, operating instructions, and maintenance manuals, as well as communicate effectively with colleagues and vendors., • Mathematical Skills: Proficient in basic math operations—adding, subtracting, and working with fractions and decimals., • Reasoning Ability: Capable of solving practical problems and interpreting various types of instructions., • Attractive Benefits Package: Enjoy a quarterly bonus, comprehensive medical, dental, and vision coverage, a 401(k) plan, company-paid life insurance, and more!, • Competitive Pay: $25 - $45 per hour, with potential to make more based on your experience, education and shift. We also have available overtime., • New Facility: Work in our brand-new, cutting-edge manufacturing environment. SMM is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. SMM as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at SMM. #IndustrialElectrician #ElectricianJobs #Innovation #VETS #Manufacturing #Millwright This is a non-management position This is a full time position

⚡Join Our Growing Team as an Industrial Electrician at Superior Metals Manufacturing!⚡ Job Summary: Are you looking for your next challenge? Join us as an Industrial Electrician and become an intricate part of our success. In this dynamic role, you’ll tackle exciting challenges by inspecting, maintaining, and troubleshooting high-voltage systems and production equipment. With your electrical expertise and hands-on skills, you'll ensure everything runs smoothly and safely. You'll work with cutting-edge technology and engage in innovative electronic system development—all while being part of a fast-growing company. If you love solving problems and thrive in a fast-paced environment, this is the perfect opportunity for you! Essential Job Functions: • Inspect, maintain, and repair our plant-wide production equipment to keep everything running smoothly., • Work hands-on with 480V 3-phase electrical power distribution systems—let’s keep the lights on!, • Apply your electrical theory knowledge and troubleshooting to tackle any issues that arise., • Dive into machine instrumentation and electrical controls, keeping our systems sharp and efficient., • Handle high voltage systems and equipment like a pro., • Get acquainted with hydraulic and pneumatic systems—your toolbox just got a little bigger!, • Utilize PLC controls and Ladder Logic Programming to enhance our automation processes., • Read and interpret electrical and hydraulic schematics and plant drawings like a map to success., • Assemble, install, test, and maintain electrical and electronic fixtures using your trusty hand and power tools., • Perform preventative maintenance tasks to keep our production equipment in top shape., • Diagnose malfunctioning systems with your keen troubleshooting skills and test equipment., • Ensure safety and continuity in our electrical systems using ohmmeters and voltmeters., • Inspect electrical systems for hazards and compliance—safety first!, • Engage in the exciting world of electronic system development, including the design and repair of controllers, timers, drives, and switches., • Education: High school diploma or GED., • Experience: 5+ years in industrial maintenance/electrical experience., • Certifications: Electrical training or certification preferred; NFPA Certified Electrical Safety Technician (NFPA 70E) is a plus., • Skills: HVAC knowledge, robotic experience, and familiarity with computer networks are preferred., • Language Skills: Ability to read and interpret safety rules, operating instructions, and maintenance manuals, as well as communicate effectively with colleagues and vendors., • Mathematical Skills: Proficient in basic math operations—adding, subtracting, and working with fractions and decimals., • Reasoning Ability: Capable of solving practical problems and interpreting various types of instructions., • Attractive Benefits Package: Enjoy a quarterly bonus, comprehensive medical, dental, and vision coverage, a 401(k) plan, company-paid life insurance, and more!, • Competitive Pay: $25 - $45 per hour, with potential to make more based on your experience, education and shift. We also have available overtime., • New Facility: Work in our brand-new, cutting-edge manufacturing environment. SMM is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. SMM as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at SMM. #IndustrialElectrician #ElectricianJobs #Innovation #VETS #Manufacturing #Millwright This is a non-management position This is a full time position

⚡Join Our Growing Team as an Industrial Electrician at Superior Metals Manufacturing!⚡ Job Summary: Are you looking for your next challenge? Join us as an Industrial Electrician and become an intricate part of our success. In this dynamic role, you’ll tackle exciting challenges by inspecting, maintaining, and troubleshooting high-voltage systems and production equipment. With your electrical expertise and hands-on skills, you'll ensure everything runs smoothly and safely. You'll work with cutting-edge technology and engage in innovative electronic system development—all while being part of a fast-growing company. If you love solving problems and thrive in a fast-paced environment, this is the perfect opportunity for you! Essential Job Functions: • Inspect, maintain, and repair our plant-wide production equipment to keep everything running smoothly., • Work hands-on with 480V 3-phase electrical power distribution systems—let’s keep the lights on!, • Apply your electrical theory knowledge and troubleshooting to tackle any issues that arise., • Dive into machine instrumentation and electrical controls, keeping our systems sharp and efficient., • Handle high voltage systems and equipment like a pro., • Get acquainted with hydraulic and pneumatic systems—your toolbox just got a little bigger!, • Utilize PLC controls and Ladder Logic Programming to enhance our automation processes., • Read and interpret electrical and hydraulic schematics and plant drawings like a map to success., • Assemble, install, test, and maintain electrical and electronic fixtures using your trusty hand and power tools., • Perform preventative maintenance tasks to keep our production equipment in top shape., • Diagnose malfunctioning systems with your keen troubleshooting skills and test equipment., • Ensure safety and continuity in our electrical systems using ohmmeters and voltmeters., • Inspect electrical systems for hazards and compliance—safety first!, • Engage in the exciting world of electronic system development, including the design and repair of controllers, timers, drives, and switches., • Education: High school diploma or GED., • Experience: 5+ years in industrial maintenance/electrical experience., • Certifications: Electrical training or certification preferred; NFPA Certified Electrical Safety Technician (NFPA 70E) is a plus., • Skills: HVAC knowledge, robotic experience, and familiarity with computer networks are preferred., • Language Skills: Ability to read and interpret safety rules, operating instructions, and maintenance manuals, as well as communicate effectively with colleagues and vendors., • Mathematical Skills: Proficient in basic math operations—adding, subtracting, and working with fractions and decimals., • Reasoning Ability: Capable of solving practical problems and interpreting various types of instructions., • Attractive Benefits Package: Enjoy a quarterly bonus, comprehensive medical, dental, and vision coverage, a 401(k) plan, company-paid life insurance, and more!, • Competitive Pay: $25 - $45 per hour, with potential to make more based on your experience, education and shift. We also have available overtime., • New Facility: Work in our brand-new, cutting-edge manufacturing environment. SMM is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. SMM as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at SMM. #IndustrialElectrician #ElectricianJobs #Innovation #VETS #Manufacturing #Millwright This is a non-management position This is a full time position

⚡Join Our Growing Team as an Industrial Electrician at Superior Metals Manufacturing!⚡ Job Summary: Are you looking for your next challenge? Join us as an Industrial Electrician and become an intricate part of our success. In this dynamic role, you’ll tackle exciting challenges by inspecting, maintaining, and troubleshooting high-voltage systems and production equipment. With your electrical expertise and hands-on skills, you'll ensure everything runs smoothly and safely. You'll work with cutting-edge technology and engage in innovative electronic system development—all while being part of a fast-growing company. If you love solving problems and thrive in a fast-paced environment, this is the perfect opportunity for you! Essential Job Functions: • Inspect, maintain, and repair our plant-wide production equipment to keep everything running smoothly., • Work hands-on with 480V 3-phase electrical power distribution systems—let’s keep the lights on!, • Apply your electrical theory knowledge and troubleshooting to tackle any issues that arise., • Dive into machine instrumentation and electrical controls, keeping our systems sharp and efficient., • Handle high voltage systems and equipment like a pro., • Get acquainted with hydraulic and pneumatic systems—your toolbox just got a little bigger!, • Utilize PLC controls and Ladder Logic Programming to enhance our automation processes., • Read and interpret electrical and hydraulic schematics and plant drawings like a map to success., • Assemble, install, test, and maintain electrical and electronic fixtures using your trusty hand and power tools., • Perform preventative maintenance tasks to keep our production equipment in top shape., • Diagnose malfunctioning systems with your keen troubleshooting skills and test equipment., • Ensure safety and continuity in our electrical systems using ohmmeters and voltmeters., • Inspect electrical systems for hazards and compliance—safety first!, • Engage in the exciting world of electronic system development, including the design and repair of controllers, timers, drives, and switches., • Education: High school diploma or GED., • Experience: 5+ years in industrial maintenance/electrical experience., • Certifications: Electrical training or certification preferred; NFPA Certified Electrical Safety Technician (NFPA 70E) is a plus., • Skills: HVAC knowledge, robotic experience, and familiarity with computer networks are preferred., • Language Skills: Ability to read and interpret safety rules, operating instructions, and maintenance manuals, as well as communicate effectively with colleagues and vendors., • Mathematical Skills: Proficient in basic math operations—adding, subtracting, and working with fractions and decimals., • Reasoning Ability: Capable of solving practical problems and interpreting various types of instructions., • Attractive Benefits Package: Enjoy a quarterly bonus, comprehensive medical, dental, and vision coverage, a 401(k) plan, company-paid life insurance, and more!, • Competitive Pay: $25 - $45 per hour, with potential to make more based on your experience, education and shift. We also have available overtime., • New Facility: Work in our brand-new, cutting-edge manufacturing environment. SMM is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. SMM as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at SMM. #IndustrialElectrician #ElectricianJobs #Innovation #VETS #Manufacturing #Millwright This is a non-management position This is a full time position

If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPP and its subsidiaries may be the right fit for you! If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! CPP Syracuse is looking for a CMM Programmer to join our team! Major Responsibilities: • Ensure production goals and ship schedules are met, • Manage staffing levels and requirements, • Ensure team members remain productive, • Follow Leader Standard Work., • Able to set up and layout castings, wax tools, wax patterns, ceramic cores and gages using standard layout equipment including manual and programmable CMMs., • Responsible for CMM program development, modification and implementation in close association with Engineering., • Operate, program and document layout of various manufacturing metal castings Coordinate Measuring Machine (CMM), Blue light scanner, or other measuring equipment., • Understanding of Geometric Dimensioning and Tolerancing (GD&T)., • Interpret, read, download, and understand complex blue prints, CAD models and apply that understanding to interpret the results of layout inspection data., • Ability to accurately complete and train others to complete standard and customer specific layout forms and templates, • Responsible to review results, assess failures and anomalies resulting from measurement issues during the process to ensure layout results are accurate and validated, • Adhere to AS9100 and ISO procedures and compliance Education: Associate's degree (A. A.) or equivalent from two-year College or technical school; or a minimum of five years related experience and/or training; or the equivalent combination of education and work experience. Prefer degrees in engineering technologies. Software: Tecnomatix Quality software (3D programming), Atos professional (Blue Light), MeasureMax. Unigraphics Compensation Range: $105,000.00 - $130,000.00 Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: ___ CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a management position This is a full time position

Consolidated Precision Products (CPP), an aerospace and defense manufacturing company, has an immediate need for a CNC Programmer to join our team! This is a 1st shift position at our plant in Chittenango, NY. This position is responsible for programming computer numerical control (CNC) machines to produce parts in accordance with detailed engineering drawings, customer and ISO Certifications. Blue-print reading experience is preferred in this position. The CNC Programmer will work with other CNC Machinists to effectively set up, run, program, and trouble shoot new and existing parts and production lots, as well as successfully detect malfunctions in machine operations. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Compensation $32.00 - $45.00 hourly JOB SUMMARY This position performs machine setups and manufactures machined parts and develops programs for computer based numerically (CNC) controlled machine shop equipment to perform standard metal cutting to meet customer requirements. ESSENTIAL JOB FUNCTIONS/DUTIES • Demonstrated ability to understand and work with advanced “shop” mathematical concepts., • High level of experience of all aspects of machine manufacturing. i.e.: 3, 4, 5 axis machines, material types, tooling, fixtures, fixture design, part holding techniques, and advanced CNC programming., • Excellent analytical and problem solving and resolution capability., • Enthusiasm, drive, and work ethic in an ‘on-time’ environment., • Ability to work with management, others within engineering, purchasing, and shop floor staff to complete estimates, provide feedback to improve processes, and resolve manufacturing issues., • Demonstrates a solid understanding of 3D modeling software., • Has the ability to create training materials and train shop floor employees., • Possesses creative thinking skills and is a detail-oriented personality., • Is able to communicate well to other members of the development team., • Eliminate waste and elevates productivity using Lean Manufacturing program., • Participate in the startup of new equipment., • Ability to cooperate; work effectively and professionally with all levels in the organization, both internal and external customers., • Adhere to AS9100 and ISO procedures and compliance, • Ensures all equipment controls are accurately defined and maintained., • Contributes to team effort by accomplishing related results as needed., • Responsible for adherence to all safety policies, practices and procedures., • Ability to work flexible hours and demonstrate reliability., • Education: High School or GED Diploma required - Associates Degree or Certification in related field preferred., • Experience: 3-5 years of experience with CNC Programming, and operation of CNC machines., • Knowledge of 3D modeling software and Gcode a must., • Familiar with Motion Control and Vision., • Decision Making and Problem Solving: Able to take action in solving problems with exhibiting judgment and a realistic understanding of issues., • Experience and skill in troubleshooting control systems., • Knowledge of GD&T practices, • Experienced in interpretation of technical drawings CPP-Syracuse is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Syracuse, as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. No Phone Call Please. This is a non-management position This is a full time position

If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPP and its subsidiaries may be the right fit for you! If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! CPP Syracuse is looking for a CMM Programmer to join our team! Major Responsibilities: • Ensure production goals and ship schedules are met, • Manage staffing levels and requirements, • Ensure team members remain productive, • Follow Leader Standard Work., • Able to set up and layout castings, wax tools, wax patterns, ceramic cores and gages using standard layout equipment including manual and programmable CMMs., • Responsible for CMM program development, modification and implementation in close association with Engineering., • Operate, program and document layout of various manufacturing metal castings Coordinate Measuring Machine (CMM), Blue light scanner, or other measuring equipment., • Understanding of Geometric Dimensioning and Tolerancing (GD&T)., • Interpret, read, download, and understand complex blue prints, CAD models and apply that understanding to interpret the results of layout inspection data., • Ability to accurately complete and train others to complete standard and customer specific layout forms and templates, • Responsible to review results, assess failures and anomalies resulting from measurement issues during the process to ensure layout results are accurate and validated, • Adhere to AS9100 and ISO procedures and compliance Education: Associate's degree (A. A.) or equivalent from two-year College or technical school; or a minimum of five years related experience and/or training; or the equivalent combination of education and work experience. Prefer degrees in engineering technologies. Software: Tecnomatix Quality software (3D programming), Atos professional (Blue Light), MeasureMax. Unigraphics Compensation Range: $105,000.00 - $130,000.00 Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: ___ CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a management position This is a full time position

Consolidated Precision Products (CPP), an aerospace and defense manufacturing company, has an immediate need for a CNC Programmer to join our team! This is a 1st shift position at our plant in Chittenango, NY. This position is responsible for programming computer numerical control (CNC) machines to produce parts in accordance with detailed engineering drawings, customer and ISO Certifications. Blue-print reading experience is preferred in this position. The CNC Programmer will work with other CNC Machinists to effectively set up, run, program, and trouble shoot new and existing parts and production lots, as well as successfully detect malfunctions in machine operations. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Compensation $32.00 - $45.00 hourly JOB SUMMARY This position performs machine setups and manufactures machined parts and develops programs for computer based numerically (CNC) controlled machine shop equipment to perform standard metal cutting to meet customer requirements. ESSENTIAL JOB FUNCTIONS/DUTIES • Demonstrated ability to understand and work with advanced “shop” mathematical concepts., • High level of experience of all aspects of machine manufacturing. i.e.: 3, 4, 5 axis machines, material types, tooling, fixtures, fixture design, part holding techniques, and advanced CNC programming., • Excellent analytical and problem solving and resolution capability., • Enthusiasm, drive, and work ethic in an ‘on-time’ environment., • Ability to work with management, others within engineering, purchasing, and shop floor staff to complete estimates, provide feedback to improve processes, and resolve manufacturing issues., • Demonstrates a solid understanding of 3D modeling software., • Has the ability to create training materials and train shop floor employees., • Possesses creative thinking skills and is a detail-oriented personality., • Is able to communicate well to other members of the development team., • Eliminate waste and elevates productivity using Lean Manufacturing program., • Participate in the startup of new equipment., • Ability to cooperate; work effectively and professionally with all levels in the organization, both internal and external customers., • Adhere to AS9100 and ISO procedures and compliance, • Ensures all equipment controls are accurately defined and maintained., • Contributes to team effort by accomplishing related results as needed., • Responsible for adherence to all safety policies, practices and procedures., • Ability to work flexible hours and demonstrate reliability., • Education: High School or GED Diploma required - Associates Degree or Certification in related field preferred., • Experience: 3-5 years of experience with CNC Programming, and operation of CNC machines., • Knowledge of 3D modeling software and Gcode a must., • Familiar with Motion Control and Vision., • Decision Making and Problem Solving: Able to take action in solving problems with exhibiting judgment and a realistic understanding of issues., • Experience and skill in troubleshooting control systems., • Knowledge of GD&T practices, • Experienced in interpretation of technical drawings CPP-Syracuse is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Syracuse, as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. No Phone Call Please. This is a non-management position This is a full time position

Job Description Do you love cars and want to make a difference in your community? United Radio is Central New York’s premier upfitter of emergency, construction and commercial vehicles. As an Upfit Technician, you will be installing/removing various types of emergency equipment; (lights, land mobile radios, sirens, prisoner partitions, weapon mounts, consoles, controllers, radar equipment, camera/DVR systems, push bumpers, etc.) . Job Requirements: Working knowledge of automobile electronics (12 Volt systems) and proficiency using basic hand and power tools. • Disassembling & reassembling vehicle’s exterior body parts & interior panels, • Properly mounting & securing components to vehicles, • Routing wires and cabling into vehicles, • Splicing wires and/or soldering connections to equipment & components, • Terminating connections on radios, LED lights, sirens, radar components, and electrical components, • Troubleshooting, diagnosing and/or replacing electrical components, • Documenting all work completed on work orders accurately, • Maintaining a clean, organized and safe working area, • Work inside small areas like vehicle trunks, underneath cars, in engine compartments, underneath dashboards., • Must be able to lift, squat, kneel, stoop, bend, lay down, twist, climb, stand, sit, etc., • Assemble small and large items: brackets, partitions, light bars, push bumpers, cargo boxes, vehicle parts, fasteners, wires, loom, clamps, cable ties, etc. using both hands., • Be in overall good physical health and have full motion/use of hands, fingers, arms, legs, feet, shoulders, elbows, neck, etc. to fit into tight spaces and inspect/install wiring and products inside tight compartments, under, in and around the vehicle., • Must be able to work above, in, on and under vehicles. Job Type: Full-time Must be able to pass a criminal background check, drug test and have a clean driver’s record. Our shop is fully climate controlled during the entire year. We hold events like monthly employee breakfasts, lunches and other activities to make the workdays fun. Pay: $21.00 -$35.00 per hour Pay range dependent on experience. Expected hours: 40 per week, Monday through Friday 8:00am-5:00pm Benefits: • 401(k) matching, • Dental insurance, • Health insurance, • Health insurance contribution, • Paid time off, • Bonus opportunities, • Employee-focused culture, • Technical and non-technical training, • No required overtime, • On-Job training

Job Description Required IPC 600, 610, 620 certification and experience The Source Inspector, (SI) is responsible for performing inspection operations of in-process or completed hardware, including dimensional, and visual inspection. The source inspection may include reviewing all paperwork relating to the product at hand. This includes operations such as Final Inspection, Receiving Inspection, Outside processing, and Assembly. The SI will also verify FAI’s to AS9102 for accuracy and completeness. The SI must be familiar with hand tools and gaging techniques. The SI will also be fluent in B/P interpretation and GD&T. Source Inspection will occur at end customer’s suppliers’ location. The SI will travel to these locations. Job Functions: • Experienced quality individual in dimensional and visual inspection of aerospace machined components, • Experience in performing FAI’s – AS9102 (The SI will verify supplier’s FAI, not perform them), • Experience with hand measurement tools, • Knowledge of CMM Inspection process (Knowledge of CMM Programming is not required), • Knowledge and experience in GD&T (ASME Y14.5), • Knowledge and experience with blueprint interpretation, • Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection), • Experienced quality individual in dimensional inspection of aerospace machined components, • Experience in performing FAI’s – AS9102, • Experience with hand measurement tools, • Knowledge of CMM Inspection process (Knowledge of CMM Programming is not required), • Knowledge and experience in GD&T (ASME Y14.5), • Knowledge and experience with blueprint interpretation, • Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection), • MS Outlook, and EXCEL experience, • Mechanical inspection experince preferred, • Strong verbal, written and communication skills, • Fluent English – reading and writing is required, • Professionalism, integrity, and exceptional attention to detail, • Strong independent decision-making skills; excellent analytical skills and professional judgment, • Excellent interpersonal, written, and verbal communication skills, • Work as an effective team member, • Establish and maintain effective working relationships, • Fluent English – reading and writing is required, • Pass pre-hire background check including DMV and credit screening, • Pass Pre-hire Drug Screening Supervision Received:, • The work is performed under general supervision, • U.S. Citizenship required Preferred Education and Skills (including certifications): • 3+ years’ experience as a quality inspector, technician, or engineer., • 3+ years’ experience in an aerospace manufacturing facility, • 3+ years’ experience in inspection duties, FAI’s GD&T, and b/p interpretation, • Proficient with Microsoft Outlook and Excel, • Effective communication skills, • Detail oriented, • Any combination of education and experience may be considered, • 12 days paid vacation first year, increasing with service years, • 6 days paid sick time, • 11 paid holidays, • Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. Company DescriptionTRIGO Aerospace, Defense and Rail (ADR) AMERICAS’ team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results, providing a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Thank you for visiting our Job Board. Please review our open positions and apply to the positions that match your qualifications. TRIGO ADR Americas, LLC is an Equal Opportunity Employer, including disabled and veterans. NOTICE OF AFFIRMATIVE ACTION PLAN FOR INDIVIDUALS WITH DISABILITIES,TRIGO Aerospace, Defense and Rail (ADR) AMERICAS’ team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results, providing a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain.\r\n\r\nThank you for visiting our Job Board. Please review our open positions and apply to the positions that match your qualifications.\r\n\r\nTRIGO ADR Americas, LLC is an Equal Opportunity Employer, including disabled and veterans.\r\n\r\nNOTICE OF AFFIRMATIVE ACTION PLAN FOR INDIVIDUALS WITH DISABILITIES,