Trabajos shop en Phoenix, Arizona - Page 16Crear alertas

Job Description Position Overview: The role oversees multiple reconditioning lines and is responsible to ensure necessary production metrics are consistently met. What you'll be doing: • Oversee multiple reconditioning lines within the Inspection & Reconditioning Center (IC), planning production for a full working shift., • Fully manage facilities to meet or exceed targets in production, cost, and quality when the General Manager is not onsite., • Quickly identify bottlenecks that affect site throughput and efficiency. Conduct root cause analysis, develop action plans, and execute with the site leadership team and associates., • Conduct weekly site performance reviews with Senior Reconditioning leadership, reporting on performance versus targets, challenges, and countermeasures., • Guide daily site manager huddles to establish the day's tone and priorities., • Aid in the execution of Continuous Improvement projects at home site and, if applicable, throughout the region/network, while implementing and training process changes., • Foster growth and development in our Reconditioning Lead and Manager populations by supporting Development Plans and providing regular competency-based feedback., • Embody Carvana values through effective leadership, teamwork, and communication on the shop floor., • Uphold Carvana operating standards and processes., • Must be open to relocation, ideally nationwide but at minimum regionally (Northeast, Southeast, Midwest, West Coast)., • Ability to maintain high volume and high-quality content in a fast-paced environment., • Experience leading a team of over 50 associates and a track record of developing employees., • Proven ability to solve urgent operational challenges through root cause analysis., • Excellent communication skills., • 8+ years of management experience either in an automotive or lean manufacturing environment., • Valid unrestricted driver's license with a clean driving record in the last 3 years., • Must be able to read, write, speak and understand English., • Must be at least 18 years of age., • Requires standing for extended periods of time with frequent stretching, reaching, walking, stooping, pushing, and/or pulling in an environment that may be cold, hot, noisy, and wet and may have fumes or odors due to vehicle maintenance., • Requires use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment., • Ability to work variable schedule(s) as necessary., • Must be able to lift up to 60 pounds independently; majority of lifting from knee to shoulder heights; other lifting required from various levels., • Must be able to walk up to three miles each day. Other requirements To be able to do your job at Carvana, there are some basic requirements we want to share with you.

Job Description About the Role: The Shop Technician inspects, maintains, and repairs customer-owned mechanical and electrical equipment to ensure safe, reliable operation. This role requires hands-on technical expertise to diagnose issues, perform maintenance, and complete repairs while adhering to safety standards. By working closely with the team, the Shop Technician helps ensure timely service and high customer satisfaction. Essential Duties and Responsibilities: • Ensure a high level of customer service is always provide, • Move, position, and secure power equipment and machinery weighing up to 75 pounds for inspection, testing, and repair, with or without reasonable accommodation, • Perform shop-based service work for power equipment, including disassembly, cleaning, repair, reassembly, and functional testing, • Complete detailed mechanical and electrical assemblies in accordance with manufacturer service manuals, • Accurately complete complex repair procedures in a fast-paced, noisy, and shared shop environment, • May provide assistance with the setup of new customer equipment, • May assist in the loading/unloading of product onto trucks, • Timely completion of assigned training and continuing education modules to stay current with manufacturer updates and bulletins, • Safely operate and maintain power tools, air tools, and diagnostic equipment following established safety procedures, • Evaluation finished work to make sure that the services asked for have been completed, to the customers’ expectations, • Adaptability on projects from basic product needs to customer/specialized requests, • Maintain a clean and orderly workspace and assist with overall shop organization, • Perform other various duties, as outlined by supervisor, • High school diploma or equivalent, • Proven experience as a technician or mechanic in a workshop or industrial setting, • Basic knowledge of mechanical, electrical, and hydraulic systems, • Ability to read and interpret technical manuals, schematics, and blueprints, • Ability to stand, sit, bend, and work around power equipment, • Ability to lift heavy objects (75lbs) repeatedly, • Ability to safely operate power tools, air tools, and diagnostic equipment, • Own a set of basic tools, • Strong problem-solving skills and attention to detail, • Technical certification or vocational training in mechanics, electrical systems, or related fields, • Experience with computerized maintenance management systems (CMMS), • Familiarity with safety regulations and compliance standards in an industrial environment, • OSHA regulated Steel Toe Shoes: Either an ASTM F243 M/I/50/C/50 or ANSI Z41 PT M/I/50/50. Or an ASTM F2413 F/I/50/C/50 or ANSI Z41 PT F/I/50/C/50, • Work effectively in environments with varying noise levels, temperatures, and confined spaces typical of a power equipment shop, • Willingness to participate in pre-employment and random drug screenings

Job Description About You: Solutions-Oriented. Problem-solving brings you a sense of accomplishment and you bring a positive attitude, curious listening skills, and a solutions mindset to the table. Focused. You’re someone who puts in the time, energy, and effort to get the task done. You appreciate a clear deadline, and you strive to hit it every time. Adaptable. You’re flexible and you can adjust to changing or unexpected circumstances without losing your cool. You understand we work in an ever-evolving industry and your calm approach to change helps the team stay grounded. About Us: At Lewis, where every employee is an owner, our people are empowered to make decisions – big and small – to meet the goals of our clients. We are passionate about our work and driven to build quality buildings that stand the test of time. With fulfillment as one of our six core values, Lewis has a collaborative and supportive culture committed to the success and development of our people. About the Position: In Order to Succeed in This Role Assistant Superintendents will be used on larger complex projects to manage and coordinate Lewis’ direct work as well as that of the subcontractor. They will assist the Superintendent with development of work plans for Lewis and the subcontractor’s work. They will be responsible for planning, coordinating, directing and execution of work on time, meeting all requirements for safety, quality, schedule and cost. This position represents our best builders at Lewis and is intended to provide a pathway to develop the skills, experience, leadership and ability required to lead a project team as a Superintendent. It is available to individuals who have secured a current Superintendent as a sponsor. Project specific duties will be defined by the Superintendent with the goal of developing all the required core competencies of a Superintendent. This position recognizes the talent, commitment and dedication of our field leaders. Preconstruction Phase • Assist the Superintendent in development of work plans for Lewis direct work and subcontractors to be included in the master construction schedule. This should include details associated with procurement, fabrication, shipping/delivery, storage/staging and installation., • Review and comment of the estimate with a focus on General Conditions, Construction Work Support, productivity rates, material cost as well as requirements to support the subcontractors work and installation consistent with the project specifications and goals. Examples may include extra materials, access, hoisting, protection and management., • Review of the Lewis attachment B to confirm all scopes of work are covered and responsibilities clearly assigned., • Assist in coordination, planning and permitting with all AHJ requirements that are not covered under the Building Permit or others that are the responsibility of the owner. Examples include TESC, Traffic Control, Street Use, Temporary Construction Services, • Assist the Superintendent in development of the site logistics plan and all associated elements that cover all phases of the project, • Coordinate installation of all contractors work in the field that meets the project requirements including safety, schedule, quality and budget, • Plan and lead the morning crew huddles, be THE Safety Leader of the project., • Develop and update work plans/packages ensuring the most current information is included for installation in the field. Specifically coordinating with our BIM Coordinators and Detailers., • Participate in the pre-installation meetings with the subcontractors, design partners and AHJ, ensuring the work is available for installation, • Lead Pull Planning meetings to coordinate the successful installation of work in the field., • Participate in the weekly subcontractor coordination meetings and host separate coordination meetings with key contractors as needed., • Provide scheduling input and updates to the Superintendent for inclusion in the master construction schedule. Maintain a current 3 week look ahead schedule for your responsible scopes., • Maintain a daily journal of work activities on site, including progress, delays, impacts and any safety incidents., • Support with jobsite purchasing, yard rentals and tracking of all materials and associated labor including approval of invoices and time cards., • Support the accurate completion of the Labor Management Tool on a weekly basis. Monitor variances and work with the Superintendent and foreman to make correction where necessary to achieve successful outcomes., • Support in the project close out including the punch list, final inspections and approval for occupancy., • Know the work of your subcontractors better than they do! Creating opportunities for everyone to be successful., • Train your replacement. This includes taking on training/mentoring responsibilities outside of the current project assignment as a work group champion., • Establish and maintain key relationships with Owners, Architect, Engineers, and Subcontractors., • Promote the growth and development of Client and designer relationships., • Represent the Company and project team in a positive manger in all project meetings., • Journeyman certificate from the associated trade with a minimum of 8 years of experience, four years or more of general contracting experience as a foreman, preferably with proven performance on large commercial building projects., • Working knowledge of all project plans, specifications, owner contracts, subcontracts, purchase orders, daily correspondence, shop drawings, submittals, and all other project related documents., • Knowledge of all trade contractor’s means and methods in accordance with project contract documents., • Understand the CDR process as well as both the start-up and close out process., • Ability to read and interpret drawings and specifications., • Proficient in geometrical and mathematical calculations., • Creative problem solver with excellent communication skills., • Comfortable operating in a PC environment with basic skills including MS Office and knowledge of Procore, Bluebeam and scheduling software., • OSHA 30 Hour certification., • Ability to demonstrate working knowledge of all safety rules and regulations as a Safety Leader in the field. (38) Lease Crutcher Lewis: Overview | LinkedIn A 100% employee-owned general contractor, Lease Crutcher Lewis offers a comprehensive healthcare plan with medical, dental, and vision coverage. Our employer-funded Lifestyle Spending Account supports physical wellness for employees and their pets, and our employer-funded Headspace membership supports mental wellness. We also offer a generous Health Savings Account with annual employer sponsored contributions. Lease Crutcher Lewis provides support for a financially healthy future, including our Employee Stock Ownership Plan (enrollment covered at no cost to you) and a 401(k) with a competitive matching program. To support employee philanthropic efforts, employees are eligible for volunteer PTO and charitable giving matching programs. Lease Crutcher Lewis is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment regardless of, and will not be discriminated against, based on the basis of race, color, gender, pregnancy or breastfeeding, sexual orientation, gender identity or expression, religion, national origin, age, genetic information, marital status, veteran status, disability, or other status protected by state or federal law.

Job Description POSITION SUMMARY: Design Engineer II position requires a knowledge of strain gages, Wheatstone bridge, and associated electronics including compensation techniques and use of signal conditioning. Also requires some familiarity with the different basic transducer designs and materials selection, a basic knowledge of machining capabilities and joining technologies. This position requires excellent communication skills for interaction with sales, engineering, manufacturing, and customers. The position will develop force and torque measurement solutions to meet customer needs. ESSENTIAL FUNCTIONS: • Responsible for all steps from concept thru production release of products for customer force and torque measurement requirements., • Production release will include variants of existing designs up thru the development of new models., • Participant and contributor to design review and design for manufacturability sessions., • Proposes improvements to existing force and torque measurement products including design changes, manufacturing methods, and materials used., • Responsible for the evaluation of new opportunities. Evaluates both financial and technical feasibility. Determines cost and non-recurring engineering charges for new product versions., • Supports production, repair, machining, and quality departments as a technical resource for various processes (welding, assembly, calibration) as well as part root cause failure analysis and the development of corrective actions., • Provides technical guidance to other engineers in product design, materials selection, bills of materials (BOMs), component stress analysis (FEA), electronic concepts associated with load cell and torque transducer compensation and signal conditioning., • Supports Sales with technical information and concept proposals., • Software: Excel, Word, CAD, FEA, and ERP software., • Excellent communication skills both verbal and written., • Able to tactfully and effectively communicate with key customers and those in the midst of resolving conflicts and product concerns., • Interpersonal skills to establish and maintain effective working relationships with customers, vendors, and across departmental lines., • BS in Engineering, Physics, Chemistry, • 5 years minimum direct experience in design of strain gage-based measurement products. AAP/EEO STATEMENT: All qualified applicants will receive consideration for employment without regard to race, color, religion, religious creed, sex, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, military and veteran status, marital status, pregnancy, gender, gender expression, gender identity, sexual orientation, or any other characteristic protected by local law, regulation, or ordinance. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Employment is contingent upon passing a background check and a drug screen. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice About Interface, Inc. Interface, Inc. leads the world in force measurement solutions; designing, manufacturing, and we guarantee the highest quality performance load cells, torque transducers, multi-axis sensors, and related instrumentation available. Our plant includes corporate offices, state of the art manufacturing facility, accredited calibration laboratory and multi-faceted machine shop. Our engineering team provides force measurement solutions to the aerospace, automotive, energy, factory automation, medical which includes the test and measurement industries as well. Interface products can measure from grams to millions of pounds in hundreds of models and physical sizes. By maintaining the entire process, from design, machining, strain gage manufacturing and assembly, and in our own facilities, we can ensure the highest degree of performance possible. Our reach and influence is global as the preeminent force measurement solutions supplier to Fortune 100 companies worldwide, including Boeing, Airbus, NASA, Ford, GM, Johnson & Johnson, National Institute of Standards and Technology (NIST), and National Metrology Institute of Germany (PTB) and thousands of certified calibration labs. Our in-house calibration labs, certified to ISO-17025 and ANSI Z540.1, support a variety of test standards including ASTM E74, ISO-376, and many others.

Job DescriptionCompany Description MSX has been a trusted partner to leading vehicle manufacturers, their retailers, and mobility organizations globally for more than 30 years. Our unwavering commitment is to help our clients transform their businesses and effectively manage operations in the areas of: Sales Performance; Repair Optimization and Compliance; Parts and Accessories Sales Performance; and Consumer Engagement. With our global teams, industry expertise, and the power of technology, we design and deliver tailored, sustainable, and innovative solutions and services that help our clients optimize their operations and captivate their customers. Job Description Are you looking for a new opportunity? If you have automotive technician experience in your background, then we may be looking for you. What We Are Looking For: • Do you currently or have you in the past been an ASE certified technician?, • Do you like solving complex issues as it relates to solving vehicle issues?, • Are you known as the “person who can fix anything automotive related”? The Automotive Technical Advisor key tasks are: • Assessing and solving technical escalations., • Providing online and in-dealership technical assistance., • Leading discussions and acting as a subject matter expert., • Managing recall requirements and ensuring Required Service Updates (RSU) are completed and following up to ensure a reduction in buybacks., • Interacting with the team as the quality feedback liaison., • Providing dealership consultations on repair order documentation, repair service agreements, and facility inspections., • Ensuring the improvement of the customer experience and increasing “fixed first visit” cases., • Full-time position with benefits effective the first of the month following 30 days of employment., • Benefits include Health, Rx, Dental, Vision Insurance, 401k Savings Plan, Health Savings Account, Disability Insurance plans, and employee discounts., • Hybrid work environment: 3 days field work with local travel and 2 days work from home per week on average with little to no weekend work., • Monthly paid car allowance., • Paid standard US holidays and paid vacation time.Qualifications, • A minimum of 2 to 4 years automotive experience required; current ASE certification is preferred but previously certified individuals will be considered., • Field-related management experience is preferred., • Must have dealership experience., • Ideal experience required: Assistant Manager, Shop Foreman., • Highly motivated, adaptive, and autonomous with the ability to deliver results., • Ability to travel locally to dealerships within a designated area., • Ability to analyze and document vehicle case updates using Microsoft Excel., • Ability to communicate technical information to all levels., • Ability to analyze data and create custom reports using provided templates., • Ability to effectively use MS Word, Excel, and PowerPoint., • Ability to work independently and manage a progressive workload in a fast-paced environment. Additional Information The wage range for this role takes into account the wide range of factors that are considered in making compensation decisions including but not limited to skill sets, experience and training, and other business and organizational needs. The disclosed range estimate may not have been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At MSXI, it is not typical for an individual to be hired at the top of the range for their role and compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the current range is $75k to $100k based on current experience. MSX International is an Equal Employment Opportunity Employer committed to employing a diverse workforce. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability and protected veteran status, age, or any other characteristic protected by law.

Job DescriptionSalary: $60,000-$80,000 KBE Building Corporation: Relationships Are Everything! Join our team today!! KBEs relationship focus means that you can count on us to do the right thing at all times and work in the best interests of your project. We will be proactive and open in all of our communications and interactions with all members of your project team. Our clients, design partners, and trade contractors say they trust KBE to do the right thing because we build relationships first, buildings second. Read on to see if this is the place for you!! At KBE, we expect the best and reward it with excellent compensation and benefits, challenging work, opportunities to learn and grow, and the chance to give back to our communities. Work Life Balance: • Flexible Work Hours, • Paid Paternal/Maternal Leave, • Vacation, sick, and personal time, • Paid Holidays, • Medical and Dental Insurance (Premium cost sharing between the company and employee), • Health Incentive Insurance Discount Employee assistance program, • Annual Company Meetings, Company Fun Events, & holiday parties, • Quarterly Employee Photo Contests with prizes!, • Company swag! Mugs, Clothing, Backpacks, and more, • Dress code: Business Casual and Philanthropy Fridays (Jeans), • Employee Work Anniversary Recognition, • KBEYOU- Focusing on our company growth with career development and training Compensation: • Competitive Salaries, • Employee Referral Bonuses, • Corporate Contributions toward Monthly Student Loan Repayment, • Reimbursement for select gym and fitness memberships, • Company Paid Life Insurance, • Structured Bonus Program How is this starting to sound!? Are you the next KBE employee!? Apply today! Position Summary: The Field Engineer will assist the Project Manager with the day-to-day construction, technical and administrative aspects of assigned construction projects. Field engineer will assist Project Manager & Supt in field work support role, including but not limited to estimating, procurement, report preparation, and overall support in every aspect of each project. Supervisory Responsibilities: Responsible for oversight of subcontractors when applicable. This may include resolution of jobsite issues and situations as they arise. Supervision includes use of discretion and independent judgement when dealing with discrepancies and matter of significance on the job. Key Responsibilities & Essential Functions: Includes the following, other duties may be assigned. Perform project startup • Comprehension of construction plans and specifications for assigned project, • Review of Owner Contract for project specific requirements, • Distribute drawings to subcontractor for pricing/Contract Award Review Project Specifications for submittal requirements, • Set up an initial master document set of drawings in construction management (CM) software, • Understand and perform document control procedures in accordance with KBE policy and procedures, • Maintain & update construction drawings and document logs, • Post A/E Sketches & Addendum and incorporate revisions into master document set in CM Software, • Review as-built drawings for compliance and accuracy prior to making monthly subcontractor payments/ review identified issues to the Project Manager, • Research and discuss RFIs with Superintendent, • Draft, compile, and distribute RFIs via CM software. Ensure timely follow-up on responses, • Enter into Construction Management Software and follow through on responses, • Track for possible cost and schedule impact, • Review all incoming changes and identify as Potential Change Order (PCO), • Distribute for pricing/ estimate, as applicable. Maintain PCO log, • Ensure follow-up on pricing from vendors, • Compile data and distribute Change Proposals/Orders to appropriate parties, • Revise Change Proposals/Requests as applicable and as a priority, • Review changes with Project Team as applicable and as a priority, • Update Change Proposal/Order Logs and review them at weekly subcontractor meetings, • Flag outstanding Change Orders to PM that may impact timeline or when response is delayed from owner, • Maintain all related logs for review at meetings, • Review Submittals for accuracy and compliance with Specifications. Consult Superintendent for all issues that need clarification, • Follow up with Subcontractors and Design Team members for timely submission of Submittals. Make team aware of delinquent submittals, • Prepare and update Submittal Log on weekly basis, • Stamp, initial, package and distribute submittals to and from all parties, • Track/enter Submittals to and from field, Architect, consultants and subcontractors, • Obtain information and Submittal approvals required from Owner, Architect, and engineering consultants for timely processing, • Prepare / updated Submittal Log, • Review all incoming changes for conformity/validity and create PCO as required, • Coordinate and schedule meetings as directed. Prepare and print all reports necessary for meetings, • Review awarded subcontracts, assist with daily reports and prepare project meeting minutes, • Review Job Status Report and follow up with any non-compliance items, • Enter subcontractor contact information for Project Directory, • Distribute Project Schedules as required, • Compose project related correspondence as required or requested by the Project Manager or Superintendent, • Create and maintain subcontractors close out compliance, • Conduct QC/QC inspection and verify work installation compliance with Contract Documents and shop drawings, • Verify use of specified materials & equipment and compliance with Submittals, • Assist with the implementation of Safety best practices and compliance with KBE Safety protocol To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • BS in Construction Management or Engineering Technology with 0-3 years of building construction experience, • Or 2+ years of administrative construction industry experience, • Or 2+ years of core construction industry course work beyond secondary school., • Basic understanding of construction principles and practices, • Exposure to Construction Management and Scheduling Software, and Microsoft 365 (Word, Excel, Outlook Project), and Bluebeam programs, • Experience with Autodesk, REVIT, and LEED is beneficial, • Ability to work independently and as part of a team, • Proven skills and ability in organization, time management, flexibility, sense of urgency, professionalism with both clients and co-workers, and attention to detail., • Strong communication skills required for interaction with subcontractors, venders, Architects, Engineers, and Clients KBE Building Corporation is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability or protected Veteran status KBE is a VEVRAA Compliant Federal Contractor.

Job Description Job Title: Heavy Equipment Shop Technician Location: Phoenix, AZ Job Type: Full-Time Salary Range: $30 to $42 hourly- DOE Position Summary: Technicians will perform service maintenance for CASE construction machinery and/or related equipment. Providing quality repairs on Construction Equipment in the shop and/or field environments. Responsibilities: • Perform service maintenance and quality repairs on CASE construction machinery and related equipment in shop and/or field environments., • Diagnose, troubleshoot, and repair engines, transmissions, hydraulic systems, and electrical components., • Perform structural repairs, including welding, in accordance with OEM guidelines., • Conduct preventative maintenance and ensure equipment is returned to optimal working condition., • Utilize diagnostic equipment and tools to identify and resolve mechanical issues., • Follow established Original Equipment Manufacturer (OEM) procedures and safety protocols., • Maintain accurate records of services performed., • Operate hand, pneumatic, and electric tools safely and effectively., • 5+ years’ mechanical experience in construction equipment is highly preferred, • Proven experience diagnosing and repairing construction equipment., • Ability to work independently without direct supervision., • Strong troubleshooting skills across mechanical, hydraulic, and electrical systems., • Must be at least 21 years of age with a valid driver’s license and acceptable driving record. Why work here? At Sonsray, we value all employees, their contributions, and most importantly, their ideas! We know that the key to moving mountains is teamwork. This is what we offer our team members: • Medical coverage (PPO + HSA options), • Dental, Vision, and Life insurance provided at no cost, • 401K with competitive employer contributions, • 80 hours of annual vacation, increasing with years of service, • Uniforms provided annually, • Annual boot voucher of $125.00, • One full paid day off annually for community volunteer work, • Birthday meal provided by Sonsray, • Privately owned and operated, with decisions made based on core values rather than corporate directives, • Annual Holiday Party, including covered airfare and hotel for employees and a guest, • Emphasis on company growth and employee development

Job DescriptionBenefits: • 401(k), • Company parties, • Competitive salary, • Free food & snacks Were looking for a STEM Educator to join our team for a few hours a week, primarily Monday - Friday from 9 AM to 12 PM, for our fantastic STEM roller skating field trips. No teaching degree is required, but a love for kids, some science knowledge, and an energetic personality are a must! This position is perfect for stay-at-home parents, educators on leave, college or graduate students pursuing an education degree, or substitute teaching staff seeking hands-on experience. Position: STEM Educator (Per Diem) United Skates of America, with over 50 years of experience in recreation and entertainment facility management, We are eager to welcome enthusiastic candidates to our team at USA Skateland Mesa 7 E Southern Ave, Mesa, AZ 85210 located at Our beautiful roller-skating facility features roller and in-line skating, a large arcade, a novelty redemption shop, a pizza caf, and the best birthday parties in town! As a STEM Educator, you will: Develop, refine, and present STEM (Science, Technology, Engineering, and Mathematics) lesson plans for students from kindergarten to high school. Conduct groundbreaking, copyrighted STEM educational programs for groups ranging from 50 to 250 students, utilizing state-of-the-art audio and video technology. The ideal candidate will possess: An outgoing and animated personality A passion for education and STEM topics An engaging stage presence Creativity and a strong ability to improvise Excellent written and verbal communication skills Proficiency in Microsoft Office, especially PowerPoint A knack for relating STEM concepts to everyday life Experience in the STEM fields (a plus) Availability Monday to Friday during school hours (specific days and times will vary based on bookings) Reliable transportation This is a fantastic opportunity to help us combine education with physical fitness and fun! Join our rapidly expanding company and start sparking young minds today! Compensation: $90 per lesson taught, plus a competitive hourly rate for lesson preparation. Position: Part-time, as needed (must be available mornings from 9 AM to 12 PM) Job Types: Part-time / Contract Pay: $90.00 We cant wait to meet you!

Job Description Position Summary The CNC Programmer is responsible for ensuring all plate/flatbar is processed through the cut station on schedule and budget while meeting quality standards. Accuracy, speed, and clean coordination with Prep, Operators, Maintenance, Purchasing, and Production Control are core to success.Primary Responsibilities (Only Stakeholder) • Nesting & Programming, • Review releases to decide best shape (PL vs. FB) and machine (CNC, Ironworker, etc.) for all piece marks., • Verify Routes & Remarks are accurate – adjust/add as needed., • Ensure all piece marks are linked to REQ or INV., • Send REQ to Purchasing following SOP if needed, • Send JCA to Project Admin following SOP when combining onto Stock material, • Create CNC files using Nesting Software, making sure Tekla Combining matches., • Cut List Creation & Issuance, • Ensure all piece marks are linked to a Cut List, • Maintain Prep Tracker – Plate/Flatbar Google Sheet, • Follow Cut List issue SOP, • Coordinate with Forklift & CNC Operators for smooth flow of material matching the priorities of Stations down the line (Parts w/ Prep > Parts > Main Members w/ Weld > Ship Loose w/ Prep > Ship Loose), • Priorities & Daily Work Direction, • Set daily and weekly priorities for CNC Operators., • Remove roadblocks and re-prioritize where necessary to keep releases on track., • Shop Discrepancies & Requisitions (Cut/Prep), • Start Shop Discrepancy reports and notify Lead Production Coordinator for all issues arising from:, • Cut (Plate & Flatbar), • When discrepancies or issues require additional material:, • Create and send Requisitions to Purchasing for:, • Missing stock, • Miss-cuts, • Any other material-related corrections needed to keep work moving., • Production Tracking, • Own Production Tracking for Plate/Flatbar Cut station in Tekla and any supporting tools. • Tekla Inventory – Plate & Flatbar (Conformance & Non-Conformance), • Ensure Tekla Inventory is up-to-date by driving routine yard audits. Does not include Shapes or Stock Inventory., • Unreserve surplus material once it is no longer needed for a Job., • Time Tracking Completeness – Tekla, • Check and ensure all time entries are complete and correct in Tekla Time Tracking for:, • All CNC Operators, • Follow up on missing, obviously incorrect, or late entries and ensure corrections are made. • Daily Inspections complete for all CNC Machines., • Cut Lists for Shapes, • Assist with or create Cut Lists for shapes (saws, in-station, etc.) as needed to keep work on schedule., • Station Releases - Create or manage station-level releases when required to keep production flowing., • Requisitions - Create Requisitions to Purchasing, • Parts Gather - Support or step in to coordinate Parts Gathering to ensure fitters and third-party fabricators receive parts on time and with correct documentation., • Document Control – Scan Folder (BOL.MTR, Shipping Ticket, Etc.), • MTR Compliance – Linking MTRs in Tekla & providing to Project Manager/Coordinator when requested, • Site Docs – Backup for Daily Inspections, • When the responsible parties are absent or unable to complete them, step in to:, • Verify and upload all daily Shop/Equipment inspections to maintain compliance and documentation continuity.Key Interfaces, • Internal:, • Production Coordinators, • Cut/Prep, • Shop Foreman, • Production Manager, • Purchasing, • Shipping/Receiving Manager, • Project Manager/Coordinator, • QA/QC ManagerSuccess Measures, • 100% of shop releases linked to REQ or INV within 24 hours of release., • 95%+ of CNC Operators’ time correctly logged in Tekla by Monday at 7AM each week., • 95%+ of Releases with Plate & Flatbar on schedule and budget through the Cut station., • Daily CNC Machine inspections complete., • 95%+ accurate Tekla Inventory (Plate & Flatbar :: Conformance & Non-Conformance), • Office and shop location is in Phoenix, AZ, • Full time position, • Work environment requires the ability to sit, stand, walk on uneven surfaces, and lift up to 50lbs., • EOE. M/F/D/V are encouraged to apply. Powered by JazzHR 5ucadkCvDt

Job DescriptionJob Title: Manufacturing Engineer Job Description The Manufacturing Engineer plays a key role in optimizing manufacturing processes, improving quality, reducing errors, and increasing productivity in both highly automated and labor-intensive production areas. This position leads continuous improvement and automation initiatives, updates and creates clear work instructions, and delivers tangible cost savings while supporting a fast-paced aerospace safety restraint manufacturing operation. The role requires a proactive, hands-on engineer who thinks and acts like an owner, takes accountability, and drives results through teamwork, data-driven decision-making, and a strong focus on safety, quality, and efficiency. Responsibilities • Identify and execute process improvement opportunities that increase quality, reduce mistakes, and improve productivity across both automated and manual production areas., • Refine and enhance production processes by applying continuous improvement principles aligned with business objectives., • Collaborate with Design Engineering to implement design-for-manufacturing improvements that support cost, quality, and delivery goals., • Lead root cause investigations using statistical and analytical tools such as DOE, SPC, A3, and other quality methodologies to eliminate recurring issues., • Develop creative, low-cost mistake-proofing solutions to address process failure modes and improve product and process reliability., • Identify, justify, and implement productivity improvements and cost-saving initiatives, demonstrating ownership and accountability for results., • Design and implement tooling, fixtures, and automation solutions to support efficient production and new product introductions., • Evaluate, justify, and manage capital equipment projects from concept and business case through design, procurement, installation, and validation, including responsibility for schedule and budget., • Author, update, and maintain accurate manufacturing documentation, including work instructions and control plans, and manage documentation in product data management (PDM) systems., • Partner with cross-functional business unit teams to identify opportunities to automate and modernize legacy processes., • Troubleshoot manufacturing issues on the shop floor, quickly identify root causes, and implement effective corrective and preventive actions., • Apply automation fundamentals, including understanding sensors and reading and interpreting electrical and mechanical schematics, to optimize equipment and processes., • Use quality tools such as SPC, FMEA, PPAP, control plans, and structured root cause analysis to support robust, repeatable manufacturing processes., • Manage engineering projects with clear milestones, providing regular progress updates in weekly meetings and ensuring on-time, on-budget delivery of development and improvement projects., • Drive process improvements and equipment upgrades that deliver measurable cost savings, with an annual goal of achieving significant productivity and cost benefits., • Collaborate closely with cross-functional groups including engineering, test, certification, and purchasing to ensure successful project execution and product performance., • Champion open communication and cross-functional teamwork, ensuring that challenges, risks, and improvement ideas are surfaced and addressed promptly., • Demonstrate strong project management skills by organizing and executing multiple priorities efficiently in a fast-paced environment., • Act as a cultural ambassador by thinking and acting like an owner, operating with integrity and urgency, and promoting a culture of continuous improvement.Essential Skills, • Bachelor’s degree in Mechanical, Robotic, or Mechatronic Engineering., • Minimum 3 years of experience in manufacturing engineering or a related role, including work with automated manufacturing equipment., • Minimum 3 years of experience applying Lean or Six Sigma methodologies (preferred but strongly valued)., • Minimum 3 years of experience using quality tools such as SPC, FMEA, PPAP, control plans, and structured root cause analysis., • Proficiency with SolidWorks, with self-assessed capability of at least 7 out of 10 for modeling and creating tooling and fixtures., • Demonstrated ability to troubleshoot manufacturing issues and identify root causes quickly and accurately., • Experience managing capital equipment projects, including responsibility for schedule and budget., • Practical understanding of automation fundamentals, including sensors and the ability to read and interpret schematics., • Experience creating and maintaining written work instructions and documenting processes in a PDM system., • Experience with ERP systems and engineering management processes., • Ability to apply continuous improvement principles to refine processes and align with business objectives., • Strong analytical thinking and data-driven decision-making skills., • Proven ability to collaborate effectively with cross-functional teams in engineering, test, certification, and purchasing., • Strong communication skills, with the ability to clearly document processes and present project status and results., • Demonstrated leadership, accountability, and a bias for action in a manufacturing environment.Additional Skills & Qualifications, • Experience in the aerospace industry is preferred but not required., • Knowledge of PLCs, sensors, motors, actuators, and pneumatic or hydraulic systems is preferred., • Experience with ERP systems, with QAD experience considered a plus., • Familiarity with FAA requirements and standards relevant to aerospace manufacturing., • Experience with AutoCAD and mechanical design, including application of GD&T and ANSI Y14.5 standards., • Hands-on experience with troubleshooting, root cause analysis, and implementation of sustainable solutions., • Experience driving productivity improvements through equipment and process optimization., • Ability to champion simplicity, process focus, and a culture of continuous learning and enhancement., • Spanish language skills are a plus but not required., • Curious, self-motivated personality with a strong sense of ownership and commitment to completing tasks and projects on time.Work Environment This role operates in a combined office and aerospace safety restraint manufacturing environment. You will work in an engineering office setting and regularly spend time on the production floor, engaging with both highly automated and labor-intensive manufacturing processes. The position routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets, and fax machines, as well as interacting with production equipment, tooling, fixtures, and automation systems. The organization offers the feel of a smaller, close-knit operation while benefiting from the resources and stability of a larger parent company. The culture emphasizes ownership, accountability, teamwork, open communication, and continuous improvement, with clear project expectations, regular progress reviews, and a strong focus on safety, quality, and delivering high-performance products used worldwide in aircraft seat belts, safety restraints, and airbag systems. Job Type & Location This is a Contract to Hire position based out of Phoenix, AZ. Pay and Benefits The pay range for this position is $40.86 - $43.27/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job DescriptionSmall Part Assembler ($22/hr) Job Description We are seeking a detail-oriented and dependable individual to assemble electrical control panels, wiring harnesses, and related components used in industrial automation systems. #AeroJobsXNRGY Responsibilities • Assemble and route wiring harnesses, including cutting, stripping, crimping, labeling, and terminating cables., • Connect drivers and electrical components without requiring programming., • Perform wiring inside control panels, junction boxes, and Dixel panels., • Follow wiring diagrams, schematics, and work instructions., • Install and secure mechanical components, including coil pumps, heat trace elements, and enclosures., • Use hand and power tools safely and correctly., • Assist in layout, mounting, and assembly of panel frames, hardware, and electrical devices., • Perform self-checks to ensure accurate wiring and clean panel layouts., • Maintain safe work practices and comply with all facility safety policies., • Experience in a control panel shop., • Hands-on wiring experience with harnesses, terminations, crimping, and routing., • Experience with industrial controls or automation components., • Familiarity with heat trace, Dixel systems, or panel build environments., • Basic mechanical or electrical assembly experience., • Ability to read basic diagrams or willingness to learn., • Strong manual dexterity and comfort using tools., • Ability to stand for extended periods and lift up to 50 lbs. when necessary., • Strong attention to detail. Join a rapidly growing operation with long-term career opportunities and a stable schedule, including the potential for 4-day workweeks. Benefit from paid full hours during early setup weeks, even if production is still ramping, and enjoy a clear pathway to advancement from Assembler to Lead and Supervisor. Competitive pay is offered with a guaranteed raise upon conversion. Work Environment Work in a climate-controlled manufacturing facility, ensuring comfort and safety while performing your duties. #AeroJobsXNRGY Job Type & Location This is a Contract to Hire position based out of Mesa, AZ. Pay and Benefits The pay range for this position is $19.00 - $23.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description🔥 Job Title: Diesel Mechanic — $33-40/hour, 4 Days a week🚚⚙️ Are you the kind of mechanic who thrives on tough diagnostics, custom builds, and getting trucks running better than new? Do you want real independence, great leadership, and a shop that actually backs you with solid benefits and long‑term stability? If so, you’ll feel right at home here. We’re looking for a skilled Diesel Mechanic to take on everything from new installs to major repairs — someone who loves solving problems, turning wrenches, and taking pride in doing the job right the first time. You'll work on diesel trucks, trailers, hydraulics, electrical systems, pneumatics, drivetrains, brake systems, and more. If you want a place where your expertise actually matters, keep reading. 💪 What You’ll Do • Team up with leadership for new installs, custom builds, and upgrade projects, • Perform routine maintenance and full repairs on diesel trucks and trailers, • Diagnose, troubleshoot, and tear down components to identify issues, • Take full ownership of repairs — adjust, overhaul, rebuild, and replace components, • Work with drivetrains, electrical systems, A/C, brakes, steering, hydraulics & suspension, • Customize vehicles, perform upgrades, and handle after‑sale installs, • Tackle occasional semi‑trailer repairs and maintenance, • Ensure all work meets DOT and internal safety standards, • Keep detailed inspection and repair reports, • Help maintain a clean, organized, and safe shop environment, • Perform new body installs when needed, • Bring your skills, independence, and problem‑solving mindset every day🛠 What You Bring, • Solid experience in electrical, hydraulic, pneumatic, brake & mechanical systems, • 2+ years working on heavy/diesel trucks, • 1+ year diagnostics experience, • 1+ year brake repair/replacement, • 2+ years electrical troubleshooting, • 2+ years pneumatic troubleshooting, • 2+ years hydraulic troubleshooting, • Your own tools (we supply everything else you need), • Strong communication, teamwork, and attention to detail You’ll get: ✔ Comprehensive benefits package • Medical, dental, and vision, • Company‑paid STD, LTD, and life insurance, • Flexible Spending Accounts, • 401(k) with immediate 100% vesting + partial company match, • Paid holidays after 90 days, • Benefits start the first of the month after 30 days✔ A shop built for mechanics, • Industrial facility — partially climate‑controlled, • The rest outdoor for fresh air and big projects, • Organized, clean, and safety‑focused Three‑day weekends, every week. Enough said. Job Type & Location This is a Contract to Hire position based out of Tempe, AZ. Pay and Benefits The pay range for this position is $33.00 - $40.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionJob Title: Structures TechnicianSummary The Structures Technician supports the assembly of advanced composite and metallic aircraft structures. This role involves precision drilling, fastening, bonding, trimming, and fixture setup while ensuring all work meets aerospace quality and safety standards in a hands-on manufacturing environment. Key Responsibilities • Assemble composite and metal airframe structures per engineering drawings and work instructions, • Set up fixtures; perform drilling, fastening, trimming, and fay sealing, • Install and remove aircraft fasteners (Hi-Lok, Hi-Lite, Composi-Lok, rivets, etc.), • Operate hand and power tools including drills, PFDs, die grinders, and Jiffy/E-Tech tools, • Maintain tight tolerances, proper hole quality, and structural integrity, • Follow safety, FOD, quality, and lean manufacturing practices, • Use computer systems to access and record work instructions, • Collaborate with team members to troubleshoot and improve processesRequired Qualifications, • High school diploma or equivalent, • Minimum 3 years of aircraft structures or similar manufacturing experience, • Experience with composite and metallic assemblies and aircraft fasteners, • Ability to read engineering drawings and use shop tools safely, • Ability to lift up to 50 lbs and work in a manufacturing/hangar environmentPreferred Qualifications, • Composite and metallic airframe experience, • A&P or aerospace manufacturing exposure, • Lean manufacturing familiarity Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionQLM is seeking experienced 2G, 3G, and 4G Welders to join our fabrication team in Glendale, Arizona. If you can weld vertical and overhead without breaking a sweat, we want to talk to you. Responsibilities: • Perform 2G (horizontal), 3G (vertical), and 4G (overhead) welds on carbon steel, • Read and interpret blueprints and weld symbols, • Fabricate and assemble tank components to specification, • Maintain weld quality and production standards, • Proven experience welding in 2G, 3G, and 4G positions, • Ability to pass an on-site weld test, • Experience with MIG, Flux Core, and/or Stick welding, • Ability to read blueprints and use measuring tools accurately, • Strong attention to detail and commitment to safety

Job Description Growing company seeking a highly-experienced lead heavy equipment mechanic for preventative maintenance, component repair (required), welding and metal fabrication. Requirements: Experienced in heavy equipment, semi & light trucks Shop hours with some in-field repairs required. Valid driver’s license Participation in pre-employment and ongoing random drug and alcohol testing. We offer: • Full time, permanent employment, • Weekly payroll, • Health benefits including vision and dental options, • Employer match 401K up to 6%, • Paid time off, • Safe work environment, • Variety of activities, • Challenging projects, • Top industry wages ERI is an equal-opportunity employer. All qualified applicants will be given equal consideration regardless of race, age, sex, disability, sexual orientation, gender identity, marital status, color, religion, protected veteran status, national origin, or any other legally-protected status. Company DescriptionFounded in 1994, ERI is the industry leader in environmental remediation. We prioritize safety above all else and have a sterling reputation for ethics, honesty and compliant fieldwork. Enjoy a career with unlimited growth potential and feel good about making a positive impact on the environment! We offer great pay and benefits. Are you the newest addition to our team?Founded in 1994, ERI is the industry leader in environmental remediation. We prioritize safety above all else and have a sterling reputation for ethics, honesty and compliant fieldwork. Enjoy a career with unlimited growth potential and feel good about making a positive impact on the environment! We offer great pay and benefits. Are you the newest addition to our team?

Job Description About the Role Snider Precision is a family-owned, AS9100-certified machine shop specializing in high-precision aerospace and advanced manufacturing components. We are looking for an experienced CNC Lathe Machinist to set up, program, and run CNC turning centers in a build-to-print environment. We are open to: • Strong setup machinists with some programming experience, • Set up and operate CNC lathes (Doosan / FANUC controls), • Program parts using CAD/CAM software (Fusion 360, Mastercam, or similar), • Read and interpret engineering drawings with GD&T (ASME Y14.5), • Perform first-piece inspections and in-process checks, • Machine precision parts using aerospace materials (aluminum, stainless, titanium, Inconel), • 5+ years of CNC lathe setup and operation experience, • Experience with CAD/CAM programming, • Familiarity with FANUC controls, • Strong blueprint reading and GD&T knowledge, • Experience in precision machining (aerospace preferred), • Family-owned company with a strong reputation and long-term stability, • High-quality aerospace and advanced manufacturing work, • Clean, organized shop with modern equipment We welcome out-of-state candidates and are open to supporting relocation for the right fit. San Luis Obispo offers a high quality of life with coastal access, a strong community, and a more balanced pace compared to larger metro areas. Compensation & Benefits • $35–$50/hr (based on experience), • Medical, Dental, Vision, • Paid Time Off Company DescriptionHigh paced, clean and friendly environment.High paced, clean and friendly environment.

Job Description Job Title: Structural Steel Installer / Rigger / Welder Location: 7851 E Pr Ave, Mesa, AZ 85212 Job Type: Full-Time, In-Person Compensation: $20 to $38 per hour, based on experience About STLHD FAB STLHD FAB specializes in delivering high-quality commercial construction projects with a strong commitment to safety, craftsmanship, and teamwork. We are seeking an experienced, dependable, and detail-oriented Structural Steel Installer / Rigger / Welder to join our team. This position plays a key role in the installation of structural and miscellaneous steel components for commercial construction projects. The ideal candidate will be responsible for rigging, installing, welding, coating, and preparing materials in accordance with project drawings, specifications, and safety requirements. This individual will help ensure projects are completed safely, efficiently, and to the highest quality standards. Key Responsibilities • Lead by example in the field and shop, promoting safe work practices, quality workmanship, and teamwork., • Lay out, fit up, rig, install, weld, clean, paint, and prepare structural and miscellaneous steel components., • Perform field installation of steel components in accordance with drawings, specifications, and project requirements., • Ensure all fabricated and installed components meet blueprint specifications, material requirements, and quality standards., • Read and interpret structural drawings, shop drawings, welding symbols, and installation details., • Ensure all work complies with applicable industry standards, including AWS D1.1, ASME, and other relevant codes., • Inspect and verify that welding, rigging, and coating work meets internal quality standards and customer expectations., • Maintain welding, rigging, and coating equipment in safe working condition., • Work closely with the Fabrication Lead / Foreman to review drawings, coordinate work, and improve installation and fabrication processes., • Assist in identifying and resolving fabrication or field installation issues to maintain project schedules., • Support process improvements that enhance productivity, reduce waste, and improve overall quality., • Assist with preventative maintenance of fabrication tools, equipment, and work areas., • 3 to 5 years of experience in structural steel installation, rigging, fabrication, and welding in a commercial, industrial, or manufacturing environment., • Proficiency in welding processes such as MIG, TIG, and FCAW., • Strong ability to read and interpret blueprints, welding symbols, shop drawings, and installation plans., • Working knowledge of welding codes and standards, including AWS D1.1, ASME, and related industry requirements., • Experience with surface preparation, primer application, and finish coatings., • Ability to safely use fabrication tools, power tools, plasma cutters, rigging equipment, and welding machines., • Strong problem-solving skills and the ability to identify and correct welding, fit-up, or coating issues., • Ability to lift, carry, push, and pull up to 50 pounds., • Ability to bend, climb, squat, kneel, reach, and work in physically demanding shop and field environments., • Willingness to work overtime as needed to meet project schedules., • Competitive Pay based on experience, • Career Growth Opportunities in a supportive and skilled work environment, • Commitment to Safety and Quality on every project If you are passionate about steel fabrication, rigging, welding, and field installation, and you meet the qualifications above, we would love to hear from you. Please submit your resume along with a brief cover letter. Company DescriptionSTLHD Fab is a family driven start-up steel fabrication shop. We fabricate anything from fences to larger structural steel.STLHD Fab is a family driven start-up steel fabrication shop. We fabricate anything from fences to larger structural steel.

Job Description Evergreen Innovation Group, part of the DPR Family of Companies, is seeking an Electrical Foreman who will be primarily responsible for supervising and coordinating all the workings at a job site including a crew of electricians, apprentices, and laborers. They will establish and adjust work timelines to meet the construction schedule for the project as well as organize and coordinate all project materials and equipment. The Electrical Foreman will ensure that all work installed is completed in accordance with the standards set forth by EIG, LLC—all work will be completed on budget, on time, and in accordance with all applicable plans, specifications, codes, and industry standards. Responsibilities will include but may not be limited to the following: Supervisory Responsibilities • Instruct and train workers to install electrical wiring, equipment, and fixtures., • Coordinate with all other crafts working on a job site to ensure smooth transitions Duties and Responsibilities • Reads and interprets specifications, contract documents, and plans for projects., • Study work orders, building plans, and installation manuals to determine materials requirements and installations procedures., • Works to establish, adjust, and maintain work sequences to meet the construction schedule for a given project., • Orders, organizes, and coordinates all project materials and equipment., • Conducts quality control inspections on project sites., • Analyzes and quickly resolves any work problems that may arise in a timely manner., • Have a clear understanding of the latest edition of the NEC., • Demonstrates understanding and enthusiastic agreement with the vision and mission of EIG, LLC., • Leads by example—sets, monitors, and enforces the standards of safety (IFE), and exemplary quality of work set forth by EIG, LLC. Required Skills and Abilities • Ability to perform interlock wiring as required., • Ability to appropriately diagnose malfunctions in systems, apparatus, and components using test equipment and hand tools and take appropriate steps to correct the problem., • Excellent listening, communication, and conflict resolution skills., • Ability to identify and resolve complex issues., • Effective participation in team environment., • Ability to contribute to a culture of safety in a construction environment., • Proficient computer skills a plus., • A strong desire to learn and grow as a manager of field operations, working under the supervision of the Superintendent., • A strong work ethic and a “can-do” attitude. Education and Experience • Experience using hand tools, small power tools, shop machines, and heavy equipment., • Experience reading contract drawings and inspecting installation sites., • Experience installing and mounting electronic controls, device panels, sensors, and components., • Experience installing, assembling, testing, and maintaining electrical or electronic wiring, conduit, wiring, cable, equipment, components, and devices associated with electrical equipment following drawings of electrical layouts and building plans., • Experience testing electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures using testing devices., • Pass a background check, including drug test., • Valid Driver’s License., • 2+ years of experience as Foreman/Leadman in Commercial Construction., • Minimum of two (2) years of experience as a Journeyman in the installation, of electrical systems, equipment and fixtures using blueprints, schematics and sketches. Physical Requirements • Continual walking, standing, climbing, stooping, bending, kneeling, reaching, and heavy lifting and carrying., • Work in tiring and uncomfortable positions., • Exposure to temperatures and varying inside conditions., • Some travel possible. Location: Phoenix, AZ Company DescriptionDPR has been nationally recognized for its strong company culture, based on a well-defined purpose “We Exist to Build Great Things,” and four core values: integrity, enjoyment, uniqueness and ever forward. A flat, title-less organization that empowers people at all levels to make decisions, DPR ranked on FORTUNE’s “100 Best Companies to Work For” list for five consecutive years. For more information, visit has been nationally recognized for its strong company culture, based on a well-defined purpose “We Exist to Build Great Things,” and four core values: integrity, enjoyment, uniqueness and ever forward. A flat, title-less organization that empowers people at all levels to make decisions, DPR ranked on FORTUNE’s “100 Best Companies to Work For” list for five consecutive years. For more information, visit .

Job Description Responsible for all manufacturing engineering functions including but not limited to the following: • Driving continuous improvement activities within the organization, • Responsible for talent management and organizational effectiveness within responsible area, • Lead ITAR compliance program and Import/Export Licenses, • Responsible for engineering liaison activity between ADM-Phoenix and ADM-Nogales, • Conducts contract reviews on new customer purchase orders, • Responsible for ensuring accurate configuration management within the ERP system (Visual), • Coordinates planning and preparation of MOTs, travelers, and tooling for new production orders, • Manages customer drawing database and storage, • Responsible for storage and retrieval of documentation in MDS, • Monitors staff work schedules, • Supports shop operations, • Trouble shoots with other managers on production related matters, • Identifies and implements new manufacturing technologies, • Responsible for workforce in Manufacturing Engineering and MDS areas, • Establishing rapport with customers, • Assists with customer issue resolution, • Sales correspondence/cost price evaluation, • Responsible for Make/Buy analysis Knowledge, Skills and Abilities: Cost control, negotiation, contract management, critical thinking, task/ quality management and communication are key skills and abilities for this role • Must have strong machining and assembly skills, • Strong communication skills to interface with all facets of the organization accordingly, • May perform other duties as requested, • Travel to Nogales, MX as business needs necessitate, • Technology Trend Awareness, • Navigating change management/organizational change Education and Experience: • A Bachelor’s of Science degree required (preferably in Engineering), MBA preferred, • 7+ years of experience in a manufacturing related field. Familiarity with New Product Introduction (NPI) and producing complex aerospace components preferred., • Computer skills are necessary including Microsoft applications, ERP applications and a working knowledge of solid modeling and CNC programming

Job Description Seeking people who love dogs and have a passion for pets! Hiring ASAP! Full-time or Part-time available. Smelly Dog is a fun place to work with friendly, positive people and lots of cute dogs. If you are a hardworking person looking for a great work environment, please send us a resume. We will train you! No prior bathing or daycare experience required. SKILLS/JOB REQUIREMENTS: • Enthusiastic about working with pets, • Respectful towards dogs, employees, and clients, • Ability to work in a team environment, • Personable and able to effectively communicate with staff and clientele, • Reliable and punctual, • Ability to lift at least 50 pounds., • Ability to stand and work on your feet for 6 – 8 hours., • A clean, modern, well stocked facility, with top of the line equipment, including Electrical lift tubs and tables, and high powered force dryers, • Health inspectors brag to us that we have absolutely the CLEANEST facility they've ever seen!, • We provide top-of-the-line, premium-quality products, including a wide variety of shampoos, plus degreasers, deshedders, fast-dry and dematting solutions, remoisturizers and conditioners...everything you need to get great results on any type of dog breed. Customers, bathers and groomers LOVE our products., • A friendly, upbeat, NON-CORPORATE atmosphere, harmonious environment, where you will be appreciated, • A steady schedule with plenty of hours, • A generous employee discount on dog food and products, • Room for growthCompany DescriptionSmelly Dog is a local, family owned & operated, hotel and healthy pet shop located in central Phoenix. We have been in business since 2005. We are in a beautiful, state-of-the-art facility on 7th Street just South of Bethany Home. Our holistic approach to ensuring a healthy, happy pet for our customers includes providing overnight hotel care in a safe and comfortable environment, daily exercise and play in our doggie daycare, wash and groom services in our cage-free salon, and an assortment of super premium, all natural, eco-friendly dog products and foods, as well as fresh-baked dog treats. We promote a harmonious work environment that encourages learning and growth and a satisfactory feeling of appreciation for our employees. We love dogs AND PEOPLE, especially our employees, at Smelly Dog! We want happy, awesome people to work with us to bring health and happiness to our customers' pets! Smelly Dog is an equal opportunity employer and a DRUG FREE work place.Smelly Dog is a local, family owned & operated, hotel and healthy pet shop located in central Phoenix. We have been in business since 2005. We are in a beautiful, state-of-the-art facility on 7th Street just South of Bethany Home. Our holistic approach to ensuring a healthy, happy pet for our customers includes providing overnight hotel care in a safe and comfortable environment, daily exercise and play in our doggie daycare, wash and groom services in our cage-free salon, and an assortment of super premium, all natural, eco-friendly dog products and foods, as well as fresh-baked dog treats.\r\n\r\nWe promote a harmonious work environment that encourages learning and growth and a satisfactory feeling of appreciation for our employees. We love dogs AND PEOPLE, especially our employees, at Smelly Dog! We want happy, awesome people to work with us to bring health and happiness to our customers' pets!\r\n\r\nSmelly Dog is an equal opportunity employer and a DRUG FREE work place.

Job Description Job Title Electrical Engineer Location Buffalo, NY or Phoenix, AZ (On-Site) Department Engineering Employment Type Full-Time Company Overview GTI Fabrication is a leader in the design, engineering, and fabrication of custom modular structures, container-based systems, and complex metal assemblies. GTI supports defense, energy storage, data center, and industrial infrastructure markets, delivering fully integrated modular solutions manufactured in-house at our Buffalo, NY facility. Position Overview GTI Fabrication is seeking an Electrical Engineer with a strong focus on electrical design and drafting to support modular manufacturing programs. This role is heavily centered on creating and maintaining electrical schematics, wiring diagrams, and documentation using SolidWorks Electrical. The Electrical Engineer will work closely with mechanical engineering, manufacturing, and production teams to ensure electrical designs are accurate, manufacturable, and aligned with project requirements from concept through production. This is a design-forward, execution-oriented role embedded in the manufacturing lifecycle. Key Responsibilities • Design and develop electrical schematics, wiring diagrams, cable schedules, and panel layouts using SolidWorks Electrical, • Create, maintain, and revise electrical drawing packages to support manufacturing and assembly, • Develop electrical designs for modular systems, industrial equipment, and containerized solutions, • Collaborate with mechanical engineers to ensure proper electrical-mechanical integration, • Apply drafting standards, title blocks, revision control, and documentation best practices, • Support engineering change requests and update drawings based on production feedback, • Participate in design reviews to ensure electrical designs meet functional, safety, and manufacturability requirements, • Support troubleshooting and root cause analysis of electrical issues during build, test, and integration, • Bachelor’s degree in Electrical Engineering or a related technical discipline, • Minimum 1–3 years of experience in electrical engineering, electrical design, or drafting-focused roles, • Strong proficiency in SolidWorks Electrical, including schematic design and wiring documentation, • Experience producing electrical drawings, schematics, and wiring diagrams for industrial or manufactured systems, • Solid understanding of electrical engineering fundamentals and circuit design, • Working knowledge of industrial electrical power systems and controls, • Experience supporting manufacturing or fabrication environments, • Familiarity with panel design, harnessing, and field wiring practices, • Experience working with modular, industrial, or containerized systems, • Exposure to production support or shop-floor engineering, • Experience collaborating across mechanical, manufacturing, and quality teams

Job Description Position Title: Aircraft Mechanic Salary: $35,000/year starting. Performance based raises. Benefits: FES Staff Aircraft Rental Rate, Sick Pay Schedule: Monday-Friday. 7am-4pm, with one hour lunch break. Occasional weekend help. Location: Glendale Municipal Airport, Arizona (KGEU), and satellite locations support Description: Fly Eagle Sport is a fast growing flight school in the Phoenix, AZ area. We are seeking an A&P mechanic to manage and maintain a fleet consisting primarily of Remos GX- Light Sport Aircraft. Additional aircraft, both LSA and/or part 23 aircraft may be added in the future. The mechanic will report to FES management and work with staff to ensure all aircraft are in safe and legal flying condition. This position requires a mechanic that can accomplish self-driven work tasks, maintain an organized work environment, and is excellent at records/logbooks and reports. This position is best suited for someone that is looking to grow with a company and be a part of a booming segment in the aviation training industry. This position will grow with the company and is a vital part of our business. Starting pay is probationary but once this mechanic has proven they are a long term fit, raises will follow. Requirements: · Hold at least an A&P certificate · Have constant and positive attitude towards safety and a deep understanding of the responsibility entrusted to them as an aircraft mechanic · Conduct their work with integrity · Have excellent organizational skills · Security- Must ensure their work space and access to offices are locked when not in use · Possess teamwork, customer service skills, and treats their co-workers with dignity and respect · Solves problems timely and in accordance with proper procedures · Coordinate Maintenance items with other approved mechanics · Communicate effectively the fleet status and issues to FES management · Maintains clean logbooks and proper maintenance entries · Responds quickly to pilot discrepancies to return aircraft to service · Have their own basic set of tools · Be able to follow manufacturer's guidance on routine maintenance and repairs · Be able to move aircraft by hand and conduct general aircraft servicing · Conduct Condition (LSA) and 100-Hour Inspections on fleet aircraft · Occasionally maintain other non-aviation company assets (fuel trailer, golf cart, other vehicles, etc) · Work with local IAs for Annual Inspections on company aircraft · Generate monthly aircraft usage reports for business partners and city requirements · Composite construction/repair skills · Troubleshoot avionics · Calibrate avionics and instruments · Maintain tools and parts accountability at all times · Perform standard part 91 equipment inspections · Occasionally travel (drive or fly) to our other locations to fix aircraft that can’t be flown to our maintenance facility · Be highly productive and goal oriented in a self-driven environment · Can send/receive parts and material shipments for the company · Must take pride in their workplace, keeping tools and parts clean, organized, and labeled. · Must take pride in our workplace, keeping aircraft service items available to customers and help to maintain a clean working environment. · Be resourceful in finding and purchasing aircraft parts and equipment · TSA Flight School Security Awareness Training must be completed yearly Potential Hazards: The job applicant should know and be familiar with potential hazards associated with aircraft maintenance. They will be required to use proper personal protection to prevent injury. Hazards may include but are not limited to: · Loud engine noise · Hot and cold working environment temperatures · Hot and cold parts/material handling · Composite materials, chemicals, and tooling · Sharp objects/tools, aircraft material dust, particle projectiles from grinding/sanding etc. · Machinery and mechanical equipment that can crush, pinch, cut, etc · Lifting heavy objects by hand or by machine · Spinning propellers and other aircraft related operational hazards · Use of ladders or other elevated work · Hazardous fumes: exhaust, chemicals fumes, etc. · Hazardous liquids: oils, gas/fuel, cleaners, lubricants, etc. FES expects and requires the job applicant to use goggles, safety glasses, face shields, ear protection, aprons, gloves, safety harnesses, breathing equipment and any other suitable protective equipment to meet the hazards of any job performed. Preferred Qualifications: · Prefer at least one year of shop experience · Prefer Rotax engine experience/certifications · Prefer flight school fleet experience · Prefer Light Sport Aircraft experience · Prefer holding a Private Pilot Certificate or greater (or can obtain one with us) · Prefer a mechanic that wants to stay long term and grow with this company!

Job Description Overview SitelogIQ is a world-class team making a large-scale impact on the efficiency and sustainability of the places we live, work, shop, and heal. SitelogIQ delivers turnkey energy efficiency and property improvement programs that transform built environments and breathe life into the sustainability, financial, and resiliency goals of real estate teams and corporations across the U.S. Our mission is to make buildings better while making it easy for our clients to accelerate their impact. Job Summary Working for the Commercial Markets Division, the EVC-Electrical Technician I is critical to the day-to-day execution of our projects, including but not limited to understanding basic electrical functions, installation and troubleshooting of electric vehicle charger stations, electrical infrastructure, and lighting systems and components; keeping the job site safe, organized, and running smoothly. This position requires high attention to detail and accuracy as well as very clear and proactive communication skills, both with internal teammates, customers, as well as the public. All members of our team are expected to work together in a safe, positive, respectful, and professional manner. Tech I Responsibilities • Obtain an understanding of project scope from supervisor including any available plans or documents., • Verify material requirements and develop installation plan for project and communicate the plan to all installers., • Perform EV charger pinpointing and commissioning with product manufacturer., • Field installation of project scope ensuring all work is performed according to the appropriate compliance and is completed in a timely manner., • Provide regular and timely project information to the Lead Technician or Supervisor., • Assist Lead Tech with job resources and project information., • Responsible for all aspects of EV service including installation, replacement, troubleshooting, circuits, tracing underground electrical circuits., • 3-5 years or more of commercial and residential electrical experience, • High school diploma or equivalent preferred, • State Electrical Apprentice preferred, • Be able to get a journeyman license after working required hours, • Adhere to safety policy as well as rules and regulations, • Able to move or lift 50 lbs. unassisted, • Able to withstand varying temperatures typical in an outdoor environment, • Position spends significant amount of time sitting, standing, walking, lifting, carrying, pulling, pushing, bending, kneeling, crouching, and crawling, • Position may require climbing of ladders and/or working from heights, • Position requires dexterity for handling materials and operating equipment, • Position requires 80% travel to regional projects and to other states, overnight and extended periods of time, based on business needs., • Position may also involve prolonged periods of driving and being on the road. We offer a highly competitive salary, and comprehensive benefits, including: • Medical, dental, and vision insurance, • Disability and life insurance, • 401K, • Flex time off, • 12 paid holidays, • Tuition reimbursement, • Opportunities to drive our DE&I efforts by joining our affinity groups, Veterans and Allies Leadership Organization, or Women Inspiring & Strengthening Everyone, • Opportunities to give back to our local communities through organized events or fundraisers More About SitelogIQ At SitelogIQ, we’re focused on creating a great environment for our team first so that it is more energizing and rewarding to focus on creating a great customer experience. That’s what we call a win-win. We partner with clients in K-12, higher ed, government, healthcare, multifamily housing, and industry to optimize energy efficiency, improve indoor air quality, address lighting, and improve the customer experience. With offices across the country, it’s rewarding to make a difference in the communities where our teammates live and work. NOTE: This job description is not intended to be all-inclusive. Employee may be asked to perform other related duties as required to meet the ongoing needs of the Organization. SitelogIQ is an Equal Opportunity Employer and participates in the E-Verify program. #LI-MS1

Job Description B.H. Inc., is looking to hire a full-time Civil and Excavation Senior Estimator to complete a full range of business activities in a professional setting while adhering to the highest ethical standards. The Estimator will be responsible for preparing accurate and detailed cost estimates for earthwork and utility projects, conducting takeoffs and pricing for earthwork, grading, and underground utility tasks. This role involves evaluating project plans and specifications, visiting project sites to understand site conditions and limitations, and collaborating with team members to build comprehensive estimates. This position is located in either our North Salt Lake, Ogden or Saint George office. Are you a skilled Civil and Excavation Senior Estimator looking to take your career to the next level with a company with an outstanding company culture and team atmosphere? If so, keep reading! As an Civil and Excavation Senior Estimator, you will earn a flexible and competitive salary (Depending on Experience), which is paid weekly. You will also be eligible for benefits including health, vision, dental, life insurance, a 401k plan with a match, and paid time off (PTO). If this sounds like the opportunity that you've been looking for, please fill out our initial 3-minute, mobile-friendly application. QUALIFICATIONS FOR AN CIVIL AND EXCAVATION SENIOR ESTIMATOR • Bachelors degree in construction management, civil engineering or similar field, or equivalent construction experience., • 5-10 years of experience as an estimator for earthwork, grading, or underground projects is required., • Ability to develop and maintain relationships with subcontractors, and owners., • Ready to learn estimating processes including bid invitations, takeoffs, estimating software, plan and specification review., • Experience with Excel, Word, Bluebeam, Planswift, TBC, Agtek and Estimate(B2W). ABOUT B.H. INC. Brad Haslem started BHI with just six other people in 1998. What started as an electrical company that operated out of a one-bay shop is now a powerhouse of a general contractor, focusing not only on instrumentation and electrical, but adding civil & excavation, facilities & pipeline, construction management, and wireless & communications. With projects and offices located across the United States, BHI is a name that is recognized and respected in the industries we serve. We are a group of highly motivated, aggressive, goal-oriented individuals who love working as a team and growing our organization. We look at each other as family, not merely co-workers who punch the same clock. We firmly believe that our core responsibility is to develop people and provide for families. Here at BHI, we have a positive work environment and offer great pay and generous benefits. Do you have strong communication skills? Are you detail-oriented? Are you growth-oriented? Are you efficient? Do you take pride in your work? Are you attentive to safety? Do you have great customer service skills? If so, please apply today! Applicants must be authorized to work for any employer in the United States. We are unable to sponsor or take over sponsorship of an employment Visa at this time. EEO, including disability and vets #INDSJ1 Job Posted by ApplicantPro

Job Description Micro-Tronics is seeking an EDM Machinist II to join our team. In this role, you will set up and operate Electrical Discharge Machines (EDM) to support secondary operations and produce complex, high-precision components. This position requires hands-on experience with EDM machining, a solid understanding of blueprints and GD&T, and the ability to troubleshoot and maintain quality in a production environment. You will play a key role in supporting operational excellence through quality, efficiency, and continuous improvement. Key Interactions and Relationships Routine interactions includes coworkers, Quality, Engineering, and Planning departments. Job Responsibilities: Primary Routine Work • Set up and operate EDM equipment (including Wire EDM and/or Small Hole, if applicable), • Manufacture electrodes and fixtures to support machining processes, • Interpret blueprints and GD&T to ensure accurate part production, • Perform in-process inspections using precision measuring tools, • Troubleshoot non-conformances and adjust tooling or machine controls as needed, • Apply knowledge of machine capabilities to optimize processes, • Record production data including setup/run times and part quantities, • Complete preventive maintenance tasks and maintain equipment performance, • Recommend tooling and fixture improvements, • Deburr, clean, and package finished parts, • Maintain a safe, clean, and organized work environment (5S standards), • Cost - Setup Time: demonstrate ability to meet or exceed posted department setup time reduction goals., • Quality - Scrap Rate: maintain a scrap percentage rate of less than 750 PPM., • Assist other departments as needed., • Attend company meetings., • Implement process improvements. Job Qualifications: Training and Experience Requirements: • Minimum 4 years’ work experience, trade school, vocational education or apprenticeship required., • Minimum 2 years’ experience in EDM machining., • Practical experience with conventional machining, desirable., • Ability to use manual inspection tools required., • Practical application of machine shop mathematics., • Exposure to basic CAD/CAM, desirable., • High School diploma, or GED required., • Trade school, vocational education, or 4-year apprenticeship with 3-years work experience acceptable, in lieu of High School diploma or GED., • Critical Thinking and Analysis, • Problem Identification, • Problem Solving, • Continuous Improvement, • Good verbal and written communication skills, • Capable of reading and comprehending documents, • Must possess strong attention to details, • Ability to solve problems independently and with others, • Innovation, • Adaptability, • Operational Excellence, • Loyalty, Honesty and Respect, • Positive Company Culture Physical Requirements: • Long periods of standing/and or walking, • Repetitive motions with wrists, hands and fingers, • Ability to lift/push objects up to 25 lbs At Micro-Tronics Inc, we recognize how important your career and benefits are to you and your family. We offer a full suite of benefits, including medical, dental, vision, short and long-term disability coverage, accident insurance, critical illness insurance, basic and supplemental life insurance, employee assistance plan, retirement savings and matching, and other developmental opportunities. We are committed to supporting the way you live and work. Micro-Tronics is an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other legally protected status. Applicants requiring reasonable accommodation to complete the application process may contact Human Resources. This position requires access to information subject to the International Traffic in Arms Regulations (ITAR). Employment is contingent upon the applicant being a “U.S. person” as defined by ITAR (22 CFR §120.15), which includes U.S. citizens, lawful permanent residents, refugees, or asylees, as required by U.S. export control laws.

Job Description Job Title: Steel General Foreman Department: Field OperationsReports To: Superintendent Location: Jobsite / Regional Field Support FLSA Status: Non-Exempt (Field Leadership) POSITION SUMMARY MMI Industrial & Steel, a prominent leader in the steel fabrication industry, is seeking a dedicated and experienced Steel General Foreman to oversee our structural steel and miscellaneous metals projects. This full-time position, based at our field operations in Mesa, Arizona, offers the opportunity to play a crucial role in our dynamic field operations team. This role is not eligible for remote work as the nature of the job requires physical presence at various jobsites. As a Steel General Foreman at MMI Industrial & Steel, you will provide essential leadership and oversight, ensuring that structural steel and miscellaneous metals work is carried out efficiently, safely, and to the highest standards of quality. You will directly supervise multiple foremen and field crews, coordinate with project managers, and ensure that all activities conform to project specifications and company policies. ROLE AND RESPONSIBILITIES • Oversee multiple ironworker crews performing structural steel and miscellaneous metals work., • Supervise and support foremen in daily planning and crew coordination., • Plan and allocate manpower, equipment, tools, and materials., • Conduct daily work planning and short-interval scheduling., • Mentor and develop field leaders and crew., • Enforce accountability for safety, productivity, quality, and reporting requirements., • Supervise erection of structural steel systems, pipe racks, equipment supports, and related structures., • Oversee installation of stairs, platforms, ladders, handrails, guardrails, grating, embeds, and specialty metals., • Ensure proper layout, alignment, bolting, welding, and installation., • Coordinate cranes, lift plans, and rigging operations., • Manage punch list completion and final inspections., • Promote and enforce company safety policies and OSHA requirements., • Conduct daily pre-task planning, toolbox talks, and Job Hazard Analyses (JHAs)., • Ensure compliance with fall protection, PPE, welding safety, and rigging standards., • Attend safety meetings, audits, and incident investigations., • Lead by example to maintain a safety-first culture., • Coordinate with Superintendents, Project Managers, inspectors, and trades., • Support manpower forecasting and short-term look-ahead planning., • Assist in sequencing work to maintain the project schedule., • Identify risks early and escalate concerns as needed., • Use approved mobile devices and software for daily reporting, manpower logs, timekeeping, and production tracking., • Review and interpret blueprints, shop drawings, RFIs, and specifications in both print and digital formats., • Submit accurate, timely daily field reports.QUALIFICATIONS AND EXPERIENCE, • 8+ years of structural steel and miscellaneous metals experience., • 3+ years in a Foreman or General Foreman role., • Strong working knowledge of structural steel erection, rigging and crane operations, welding and bolting, and miscellaneous metals installation., • OSHA knowledge required (OSHA 30 preferred)., • Valid driver’s license with acceptable driving record., • Ability to pass background screening., • Willing to work extended hours, weekends, and travel as required., • Strong leadership and crew accountability., • Ability to manage multiple crews effectively., • Blueprint and specification interpretation., • Proficiency with mobile reporting tools., • Organizational and scheduling skills., • Clear communication and professional presence., • Proactive problem-solving., • Commitment to safety and quality., • Alignment with MMI Core Values: Happy, Hungry, Hardworking, Honorable.PHYSICAL REQUIREMENTS, • Lift and carry objects over 50 lbs., • Climb ladders, scaffolding, and steel structures with potential exposure exceeding 100 ft., • Bend, kneel, squat, stand, and walk for extended periods.

Job DescriptionBenefits: • TipShare +$3/hr avg, • Bonus based on performance, • Employee discounts, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development, • Vision insurance, • Wellness resources About Us SoSoBa is a chef-driven, fast-casual ramen + craft noodle shop with a loyal following and a reputation for bold flavors, scratch cooking, and a fun, high-energy atmosphere. After establishing a strong presence in Flagstaff and Phoenix Arizona, were hiring new leadership for our Phoenix location and looking for a talented Executive Chef to lead the culinary program. We already have a strong well-knit fully staffed culinary team trained and ready for our new Executive Chef. Position Overview The Executive Chef will oversee all culinary operations at SoSoBa Phoenix, ensuring that every dish leaving the kitchen meets our standards of consistency, creativity, and quality. This leader will manage kitchen staff, drive menu innovation, maintain food and labor costs to budgeted standards. The Ideal candidate will continue to cultivate our positive, efficient, and safety-focused kitchen culture. Ordering and management software and technology makes our onboarding process for the ideal candidate organized and efficient. You will be supplied with all you need to be successful on day one in your new role with us. Key Responsibilities • Lead daily back-of-house operations, ensuring smooth service and high food standards, • Execute and refine SoSoBas core menu while contributing seasonal specials and creative features, • Train, mentor, schedule, and manage BOH staff, • Maintain food quality, consistency, and presentation standards, • Manage inventory, vendor relationships, ordering, and cost control, • Uphold strict kitchen sanitation, safety protocols, and compliance with local health codes, • Collaborate with ownership and FOH leadership to drive guest satisfaction and profitability, • Assist with hiring, onboarding, and development of kitchen team members, • Ensure the kitchen operates efficiently during peak hours and under pressure, • Work closely with our Front of House management team on operations standards.Qualifications, • 35+ years of experience as an Executive Chef, Sous Chef, or Kitchen Manager in a high-volume or chef-driven concept, • Strong leadership and communication skills, • Proven track record in cost controls, ordering, and team management, • Knowledge of Asian cuisine, ramen/noodles, or scratch cooking preferred (but not required), • Ability to thrive in a fast-paced, creative environment, • Commitment to consistency, cleanliness, and team culture, • Competitive pay, • Weekly Tips, • Performance-based bonuses, • Opportunities for creative input and menu development, • Dining discounts and health benefits package, • Supportive ownership team and growth potential as SoSoBa grows, • Supportive and fully staffed kitchen crew who are all independent problem-solvers Benefits/Perks: • SoSoBa provides a generous employee discount., • Healthcare coverage is available., • Competitive wages., • Great Tips, • Sick Pay, • More great benefits will be discussed at the 90-day review.

Job DescriptionWHAT CAN WE OFFER YOU FOR ALL YOUR HARD WORK? • Competitive Salary, • PTO Program, • Nine (9) Paid Holidays!!, • Medical, Dental, Vision and Life Insurance, • Short and Long-Term Disability Coverage AT NO COST TO EMPLOYEE!!, • Tuition Assistance, • Pet Insurance, • Flexible Spending Plans, • Health Spending Plans, • Comprehensive Online Learning Center - houses thousands of training resources available to learn at your own pace!!, • 401(k) Retirement Savings - with a generous company 30% match! (100% vested after six years) GET TO KNOW US: FM Industries can promise you an environment that not only encourages your best, but also rewards it with plenty of room to grow. FM industries is a premier manufacturing solutions provider. We specialize in build to print, precision machined components, anodizing and engineered thermal spray coatings. We provide customers leading edge support from protype to production. SUMMARY OF POSITION: The Robot Programmer and Process Engineer is responsible for analyzing part models, customer and internal drawings, sketches, and design data to generate robot programs for thermal spray applications. Utilizes knowledge of Solid Works (CAD), ABB RobotStudio (RAPID) programming, thermal spray controls, shop processes, process specifications and material properties to develop optimum thermal spray programs to meet customer requirements. Develop shop aids, tools and part fixtures as required and provide technical guidance and leadership. ESSENTIAL DUTIES: • Review and determine detailed thermal spray process for parts assigned, • Develop or work with engineering and support personnel to produce thermal spray tooling and fixtures as required, • Generate solid models and utilize existing part solid models used to develop RAPID programs within ABB RobotStudio, • Develop RAPID programs using ABB RobotStudio for parts assigned, • Revise existing thermal spray programs to eliminate instruction errors or omissions, • Maintain RAPID code and RobotStudio file repository and version control, • Confer with set-up personnel and operators to oversee part set up and program prove-out to obtain first article approval., • Oversee and review RAPID programs and set-ups to assure maximum efficiency in production, • Plan fixtures and complete set up documentation for repetitive part manufacturing, • Document Standard Process Instructions for robot operators, • Keep up with new technologies and assist in implementing improvements, • Perform additional related duties as assigned, • Comply with applicable environmental, health and safety laws and regulations, Company policy and accepted safe work practices, • Understanding the importance of designing, building, and operating safe systems. Basic knowledge and understanding of basic safety work processes such as JSA’s and MOC’s, • Demonstrated commitment in the successful EH&S management of chemical processes and facilities EDUCATION AND/OR EXPERIENCE REQUIRED: • Bachelor’s degree: or technical school plus six years related experience; or equivalent combination of education and experience, • Excellent verbal and written communication skills, • Ability to effectively present information in one-on-one and small group situations to customers, clients, and employees at different levels, • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals, • Ability to read, analyze, and interpret complex documents, define problems, collect data, establish facts, and draw valid conclusions., • Ability to apply concepts of basic algebra, geometry, and trigonometry, • Certified robot operator strongly desired, ABB certification preferred, • Knowledge of plasma spray processes preferred, • Semiconductor industry experience strongly desired, • Semiconductor manufacturing/process knowledge strongly desired, • Experienced in SolidWorks design (a plus) CULTURE: At FM Industries our success is powered by people and technology. Our culture is what makes FM a fun and rewarding place to work. We champion diversity and we are always seeking new ways to amaze our customers. Success is celebrated and integrity is the core of who we are at FM Industries. FM Industries Values: • CUSTOMER FOCUS - Partnering to deliver excellence and innovation, • SAFETY - Prioritizing the wellbeing of our people, • INTEGRITY - Achieving our best through mutual respect and teamwork, • QUALITY - Investing in our People, Processes, and Products, • ACCOUNTABILITY - Taking ownership of our words, actions and results Give us your best and we’ll give you ours!

Job DescriptionSalary: DOE Commercial Journeyman Framer/Hanger Position Reports To: Operations Manager FLSA Classification: Non-Exempt (OT Eligible) Directly Supervises: N/A Work Classification: Regular Full-Time Days/Hours: M-F and as Required Group Classification: Field to Meet Project Deadlines Purpose of Position: Perform tasks involving physical labor at construction projects, specifically journeyman level framing and drywall. Primary Position Responsibilities and Duties: • Good communication skills - This person will interact with busy facility managers/engineers and will need to communicate concisely., • Ability to work flexible hours - We are often required to work off hours to accommodate our clients., • Organizational / Prioritization skills - This is a fast-paced environment, this individual must be able to organize and prioritize work and job site., • Journeyman Framer/Hanger with Ceiling grid experience, • Painter (Brush/Roll/Masking/Prep), • Ceiling Grid (Layout/Grid framing/Tile installation), • Drywall (Hang/Tape/Texture), • Metal Stud Framing (Minor) required Demonstrated technical competencies to include: • Framing/ Hanging drywall 2+ years, • Knowledge of tools, equipment, and materials common to the carpentry trade, • Ability to follow established safety rules and regulations and maintain a safe and clean environment, • Must be able to measure accurately and calculate dimensions, as well as read blueprints, • Ability to exert heavy physical effort, handling average-weight objects up to 80 pounds Skills and experience: • Experience in commercial, occupied environments a must, • Ability to work in occupied, professional environments, • Maintain records, document actions and present written progress reports, • Cleans equipment, shop area, and work site area, • Must be able to pass background check and drug test as this is a safety sensitive position, • Must be able to work nights and days Basic expertise/knowledge of following fields is encouraged: • Electrical, • HVAC, • Plumbing, • Flooring (Carpet/VCT/Tile), • OSHA 10, • AZ Drivers License, • Must have own tools and truck Objectives or Goals to Measure Performance: • Integrate Core Values: Respect, Teamwork, Safety, • Maintain a productive work flow, • Maintain a clean, safe and professional work site, • Provide quality work product

Job DescriptionDescriptionWilson Engineers is an Arizona-based firm with a staff of more than 200+ personnel specializing in water and wastewater engineering and construction management services. We are dedicated to delivering ethical, reliable, high quality services to our clients based on innovation, while sustaining a challenging and rewarding work environment for our greatest assets, our employees. We are seeking an experienced Design Engineer (PE) to join our team. This position requires 40 hours per week in our Tempe office. (This job is not remote.) Essential Duties and Responsibilities • Create Grading and Paving designs utilizing Civil 3D feature lines and corridors to create highly accurate finish ground surfaces., • Create Sewer and Water pipeline designs utilizing gravity and pressure pipe networks within Civil 3D., • Create/label exaggerated paving, sewer, storm drain and water profiles in Civil 3D, • Understand advanced survey principles, able to import survey field points into Civil 3D, capable of generating easement/property boundary linework from legal descriptions, create/edit existing or proposed ground surfaces in Civil 3D, prepare legal description/graphic based on CAD linework and convert grid coordinates to ground coordinates based on scale factors., • Process LIDAR point cloud data in Recap and utilize to create existing ground surfaces in Civil 3D, • Ability to take technical direction from Project Managers or Principals and complete design tasks and elements., • Ability to coordinate with multi-disciplinary engineering teams. Requirements • Must possess a Bachelor of Science in Civil Engineering., • Requires a minimum of four (4) years to six (6) years of Grading and Drainage/Utility Pipeline design experience including construction-related engineering services., • A current Professional Engineer (P.E.) license is preferred., • Experience working in Grading and Drainage and Utility Pipeline fields. Relevant experience shall include site vertical grading design, sewer and water pipeline design, drainage/sewer/water report preparation and specification writing., • Construction-related engineering services experience with the ability to review Shop Drawings, Specification, RFIs, issuing Engineers Directives etc., • Computer experience with Microsoft Word, Excel, Outlook., • Proficiency with Civil 3D and DDMSW (Rational Method and HEC-1 Models)., • CulvertMaster, FlowMaster, GIS, HY-8, Powerpoint, Recap (LIDAR data), StormCAD, SewerCAD, SWMM, and WaterCAD experience a plus. BenefitsThe comprehensive benefits plan offered by Wilson Engineers exceeds industry standards, and is aimed at meeting each employee's personal and professional expectations. Benefits include personal time off, paid holidays, medical, dental and vision coverage; plus a flexible spending plan and short and long-term disability. Wilson Engineers also helps in securing your financial future by offering 401k plans with employer matching.Benefits plan offered to our full-time employees: • Medical Plan, • Vision Plan, • Dental Plan, • Group Life Insurance, • Short Term Disability, • Long Term Disability, • Voluntary Term Life Insurance, • Liberty Mutual Insurance, • Personal Time Off (PTO), • Paid Holidays, • 401(K) Retirement Plan, • Section 125 Flexible Benefits Plan, • Tuition Reimbursement, • Employee Referral Bonus

Job DescriptionAt Paradox Insurance Agency, we believe the best companies are built by the best people. That’s why we’re on a mission to find the best people to become a part of our future. We are a team of caring, hard-working, and motivated individuals constantly looking for new and better ways to solve the problems our customers face while reducing the friction points that may prevent a spectacular client experience. If that sounds like you, we want to talk with you about joining our team! We’re looking for humble, hungry, and articulate people with high learning agility. If you love solving problems, navigating challenges, learning about people, and are usually one of the most charismatic or conversational people in the room, then you might thrive in our company. Producers develop genuine relationships with prospects and teammates, understand client needs, and strategically match our services and products to those needs. At Paradox, we value ability, talent, and grit more than "years of experience" or a degree. What you’ll do: • Create sales-ready opportunities, • Align products with the prospect’s objectives and pain points, • Proactively research the industry and the technology landscape to ensure you are a trusted resource to prospects and clients, • Capture key prospective client data from your interactions, from the web, and other sources, and ensure clean and accurate data is entered and maintained in our CRM, • Humble, coachable, high interpersonal skills, grit, and resilience., • Consistent desire to improve, • Cold calls stink, can you develop relationships while standing in line at the coffee shop or in a crowded room?, • Ability to confidently and effectively speak with prospects of all levels (from the janitor to the CEO), • Excellent written and verbal communications skills, • Self-driven, motivated, and results-oriented., • Possess or obtain within 90 days, an AZ state property/casualty insurance license, • Some college credit is preferred but NOT required., • 6 months - 2 years of sales experience

Job Description Whether you're a recent grad or a seasoned professional, you can experience meaningful career growth at Rosendin. Enjoy a true sense of ownership as you work with a proven industry leader on some of the most exciting and high-profile projects in the nation. We offer a wide range of job opportunities, competitive compensation, full benefits, an Employee Stock Ownership Plan and more. Why Rosendin?Committed. Innovative. Engaged. If you're looking to take your career to the next level and work with some of the best and brightest in the industry, we want to hear from you. Since our founding over 100+ years ago, Rosendin has been driven to positively impact the communities where we live and work. We are an organization built on integrity and we have a culture that empowers people, embraces diversity, and inspires everyone to do their best. As one of the largest EMPLOYEE-OWNED electrical contractors in the United States, you will have the unique benefit of being a shareholder at a company that is experiencing tremendous growth and success. When our people succeed and fuel our success, we reward them. We'd love to have you as a shareholder! YOUR NEXT OPPORTUNITY: The BIM Manager is part of the Corporate BIM team, and is responsible for the management & production of the building electrical BIM models and field/shop drawings, the BIM content for the building electrical systems, and the BIM coordination process. WHAT YOU'LL DO: * Oversee the process of virtual construction and design documentation. * Manage a team of modelers and coordinators by coaching, mentoring, and supervising. * Ensure compliance with Corporate BIM Program and Processes. * Coordinate with professional staff on reviewing models and comments. * Develop electrical building models from basic sketches, 2D drawings and verbal instructions, utilizing Revit MEP/AutoCAD MEP tools. * Resolve conflicts with other disciplines and trades using NavisWorks while adhering and improving primary electrical system design. * Produce drawings/models consistent with instruction, guidelines, and CAD/BIM standards. * Modify incoming CAD/BIM files for use in design/detailing process (clean-up, audit, reference and troubleshoot). * Prepare 3D electrical system layouts for the Underground Coordination and Above the Ceiling Coordination. * Prepare 3D seismic support model for all electrical systems. * Produce MEP Coordination Drawings and Electrical Shop Drawings extracting data directly from the 3D electrical model. * Attend and actively participate in coordination meetings with other MEP trades. * Utilize CAD Scheduling and Takeoffs for pre-fabrication. * Use the Revit family editor/AutoCAD Content Manager to build BIM content for electrical system components as needed. * The duties and responsibilities are intended to describe the general nature and scope of work being performed by this position. This is not a complete listing and other duties will be assigned based on the position's role within the business unit. WHAT YOU BRING TO US: * Bachelor's degree in Engineering or related field * Minimum 2 years' relevant work experience with an architecture/engineering consulting firm or contractor * Mechanical PE preferred * Can be a combination of education, training, and relevant experience WHAT YOU'LL NEED TO BE SUCCESSFUL: * Complete understanding of the electrical construction business * Proficient in REVIT Architecture/MEP 2010 and later, as well as AutoCAD 2D/3D (Having just training in the REVIT application will not be sufficient knowledge and experience for job requirements) * Work within project deadlines * Proficient in using a computer and Microsoft Office (Outlook, Word, Excel, etc.); Oracle preferred * Prioritize and manage multiple tasks, changing priorities as necessary * Work under pressure and adapt to changing requirements with a positive attitude * Oral and written communication skills as required for the position * Self-motivated, proactive and an effective team player * Interact effectively and profess TRAVEL: * 20% WORKING CONDITIONS: * General work environment - sitting for extended periods, standing, walking, typing, carrying, pushing, bending. Work is conducted primarily indoors with varying environmental conditions, such as fluorescent lighting and air conditioning. * Noise level is typically low to medium; it can be loud on a job site. * Occasional lifting of up to 30 lbs. * We fully comply with the ADA and applicable state law, including considering reasonable accommodation measures that may enable qualified disabled applicants and employees to perform essential functions. Rosendin Electric is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, pregnancy, age (over 40), or any other categories protected by applicable federal, state, or local law. YOU Matter - Our Benefits * ESOP - Employee Stock Ownership * 401K * Annual bonus program based upon performance, profitability, and achievement * 17 PTO days per year plus 10 paid holidays * Medical, Dental, Vision Insurance * Term Life, AD&D Insurance, and Voluntary Life Insurance * Disability Income Protection Insurance * Pre-tax Flexible Spending Plans (Health and Dependent Care) * Charitable Giving Match with our Rosendin Foundation Our success is rooted in our people. We all come together around long-term vision and a sense of shared ownership. As a group, we do whatever it takes to ensure the success of our business and your career. Rosendin Electric is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job Description Our client is one of the fastest growing engineering firms in the U.S., with nationally recognized expertise in sustainable, high-performance building engineering. We are a collaborative, innovative, and energetic team that leverages a data-driven, holistic approach to consulting engineering, performance contracting, and zero energy projects. They focus on finding engineers whose skills and personalities drive them to excel, fostering a workplace that provides unparalleled growth and career opportunities. Job Description: Our client is seeking an Electrical Engineer with three or more years of experience in Consulting Engineering. This candidate must have a strong and innovative technical background in Electrical Engineering. This position will work with a team of engineers and other consultants/design team members to design the electrical aspects of energy efficient buildings for various clients as well as complex infrastructure projects. The ideal candidate is a leader and is self-motivated individual who thrives on helping our team and clients be successful. In this role, you will be an Electrical Engineer with design and production responsibilities producing high quality work on small and large projects, a Project Manager with internal and external team responsibilities, a Client Champion by providing excellent, responsive service for our clients and an Employee Advocate by collaborating, teaching, training, growing and mentoring with other staff members while promoting their Core Values. The position is responsible for designing electrical systems, power distribution, lighting and lighting controls, emergency power, UPS, renewable energy systems, fire alarm system, low-voltage systems/coordination (IT, safety, security, access control), etc. all for the purpose of bidding and construction for various projects. This position will work with a team of engineers to design energy efficient buildings for various client. The ideal candidate is typically a self-motivated individual who thrives on helping clients and has a strong technical background. We anticipate they will be involved in all phases of the project. Desired Experience: • 3+ year(s) of experience with MEP design, • Bachelor's Degree in Electrical Engineering or Architectural Engineering, • FE Registration is preferred with potential for PE registration, • Prepare, read, and interpret technical drawings, schematics, and technical specifications., • Interacting with owners, clients, architects, and contractors as needed with verbal and written communication., • Evaluate, select, and apply standard engineering techniques, procedures, and criteria to perform assigned tasks., • Confer with other engineers and other personnel to complete project deadlines., • Apply knowledge of engineering principles and research, design, and evaluate products, equipment, systems, and processes to meet project requirements., • Design and specify system components to ensure conformance with project goals and requirements., • Research and analyze clients design requirements, manuals, and other data to evaluate the feasibility, cost, and maintenance requirements of designs or applications., • Electrical Engineering Infrastructure Design, • Construction Administration and Submittals, • Power Distribution and Lighting Systems, • Energy Systems, • Renewable Energy Systems Benefits Overview 401(k) Plan with Company Match: Currently match contributions dollar-for-dollar up to 4% of eligible pay; immediate vesting. Health & Welfare Benefits: Employer provided medical, dental, vision, prescription drug, Employee Assistance Program and accident & illness coverage. Life and Disability Insurance: Employer provided basic life insurance and AD&D valued at 50K coverage amount with the option for voluntary buy up for additional coverage. Time Off: Flexible non-accrual vacation; company holidays per policy. (For California employees, this is separate from California paid sick leave, if applicable.) Expenses: Business travel and related expenses reimbursed per company policy.

Job DescriptionAssistant Studio Manager Flour Power Cooking Studios: Mesa-Gilbert – Mesa/Gilbert, AZ About Us Flour Power Cooking Studios is a fun, high-energy cooking studio where kids and adults come together to learn, create, and celebrate through food. We host cooking classes, camps, parties, and special events in a hands-on, engaging environment. Key Responsibilities · Instruct and lead culinary classes, parties, camps, and events · Train and support studio staff · Manage and maintain inventory · Shop for and replenish inventory · Maintain a clean, organized, and safe studio environment · Assist with general administrative duties as needed Qualifications · Must be 18 years or older · Reliable transportation required · Strong culinary background (cooking and baking) · Ability to instruct and demonstrate culinary techniques (teaching experience a plus) · Experience working with and instructing children · Strong organization and communication skills Schedule · Tuesday – Thursday: 9:00 AM – 7:00 PM · Friday: 8:00 AM – 12:00 PM · Saturday: 8:00 AM – 4:00 PM (hours may vary based on events) Additional Requirements Must successfully pass a criminal background check By applying to this job, you agree to receive periodic text messages from this employer and Homebase about your pending job application. Opt out anytime. Msg & data rates may apply. Powered by Homebase. Free employee scheduling, time clock and hiring tools.

Job Description About the Role: A Security/Access Control Technician is responsible for the installation, termination, configuration, and troubleshooting of electronic security systems in commercial, industrial, and mission critical environments. This role supports the deployment of access control, CCTV, intrusion detection, and integrated security systems. Technicians must understand both field device installation and head end panel work while adhering to strict security and safety standards.Specific Responsibilities: • Install and terminate access control devices including card readers, keypads, request to exit devices, door contacts, electric strikes, and magnetic locks., • Install and configure CCTV cameras, NVRs, DVRs, and video management systems., • Run and terminate low voltage cabling including CAT5e, CAT6, composite, and security wire., • Install and service access control panels and head end equipment., • Program and troubleshoot access control and security management software., • Mount devices, drill penetrations, and properly secure hardware to various structures., • Read and interpret blueprints, door schedules, and wiring schematics., • Test system functionality and troubleshoot connectivity, power, and device communication issues., • Coordinate with IT teams for network connectivity and system integration when required., • Maintain clean and organized work areas on active construction sites., • Follow OSHA safety standards and site specific security protocols at all times., • Industry certifications and manufacturer panel certifications are a strong plus including Lenel, S2, Software House, Bosch, AMAG, Genetec, or similar enterprise security platforms.Required Qualifications:, • Reliable transportation and ability to report to the jobsite on time daily., • Valid driver’s license if required for the role., • Full PPE including hard hat, safety vest, steel toe boots, gloves, and safety glasses., • Basic hand tools and trade specific tools as required., • Ability to pass a background check and drug screening., • Ability to work in a physically demanding environment, including lifting up to 50 pounds and standing, bending, kneeling, and climbing for extended periods., • Ability to follow safety protocols and OSHA guidelines., • Strong work ethic, positive attitude, and willingness to take direction., • Ability to work independently and as part of a team., • Flexibility to work overtime, weekends, or extended shifts as needed., • OSHA 10 or OSHA 30 certification preferred SOLID Personnel is an Equal Opportunity Employer.SOLID Personnel is a niche specific skilled trades recruiting & staffing firm founded in 2013. Our unique industry experience, and streamline staffing solutions separate us from the pack. SOLID is your one-stop shop for all professional recruiting & staffing needs in the following fields: Construction & Energy, Telecommunications, Low Voltage and Security. \r\n\r\nSOLID Personnel is an Equal Opportunity Employer.

Job Description CARZ R US LLC is a trusted local shop dedicated to providing reliable, high-quality automotive service. We pride ourselves on honest work, excellent customer care, and keeping our community safely on the road. Job Description: We are looking for a skilled and motivated Automotive Mechanic to join our team. The ideal candidate will have experience diagnosing, repairing, and maintaining a wide range of vehicles. As an Auto Mechanic, you must have an in-depth understanding of all vehicle systems and components. You will also be responsible for maintaining repair shop equipment and preparing cost estimates. If youre passionate about cars and enjoy solving mechanical challenges, wed love to meet you! Responsibilities: • Perform routine maintenance (oil changes, brakes, tune-ups, tire rotations, etc.), • Diagnose and repair mechanical, electrical, HVAC issues, • Inspect vehicles, diagnose vehicles, and repair vehicles, • Keep detailed records of work performed, • Maintain a clean, safe, and organized work environment Qualifications: • Proven experience as an automotive mechanic or technician, • Engine swaps, transmission swaps, • Good with timing, HVAC, and electrical systems, • Strong diagnostic and problem-solving skills, • Knowledge of automotive systems, tools, and repair techniques, • Must have own tools, • Valid drivers license, • Competitive pay based on experience, • Opportunities for advancement, • Supportive, team-oriented work environment, • Employee discounts on services How to Apply: If youre ready to put your skills to work, apply today! Submit your resume directly through Indeed or email it to [insert hiring email].

Job DescriptionBenefits: • Employee discounts, • Free uniforms, • Opportunity for advancement As a Recreational Gymnastics Coach, youll work alongside an amazing team of coaches and program coordinators to create a fun, positive, and confidence-building experience for kids in our Preschool, Gymnastics, and NinjaZone programs. No experience? No problem! Well teach you everything you need to know about gymnastics and ninja. You just bring the enthusiasm and willingness to learn! The ideal candidate is energetic, creative, a strong communicator, and excited to be part of a fast-paced, uplifting environment. Perks & Benefits • Discounted classes, camps, and events, • Discounts at our gift shop and caf, • Opportunities for growth within the company, • Ongoing employee education, • Bereavement pay, • Maternity leaveWhat to Expect, • Lots of high fives and fist bumps, • Endless smiles and laughs with kids, • Leading groups of 58 children through fun circuits and stations, • Connecting with parents about their childs progress, • A family-like, high-energy environmentResponsibilities, • Provide instruction, corrections, and encouragement to students, • Learn and follow USAG and Arizona Sunrays guidelines, • Build knowledge in gymnastics, preschool, and ninja skills, • Track attendance and skill progress, • Create positive relationships with students, families, and teammatesRequirements, • Must be 16 years or older, • Available to work at least two days per week, • Available afternoons and weekends, • Able to stand for extended periods, • Able to lift up to 50 pounds Become a role model for children in the community! Arizona Sunrays offers a variety of high-quality programs to our community and to empower individuals through fun and fitness. We provide instruction in gymnastics, dance, NinjaZone, camps and more for ages 6 months through adults. We love inspiring children to find the joy of movement and partnering with local business, schools, and neighborhood groups to bring our community closer. We are families serving families!

Job Description CNC Lathe Machinist - NIGHT SHIFT Aerospace & Defense Manufacturing Location: 3617 E La Salle St, Phoenix, AZ 85040 (40th St and Southern) Shift: Night Shift (20% Night Shift Differential) REQUIRED: Due to the nature of work performed within our facilities, U.S. citizenship or Valid Permanent Resident status is required. RESPONSIBILITIES: • Setup & operate to produce high precision aerospace components on ferrous and non-ferrous materials, • Daily machine maintenance (checking fluid levels, cleaning out chips, etc.), • Maintaining a clean and organized work space, • Tool management, entering in offsets to compensate for tool wear etc. Replacement of worn and damaged tools (inserts, boring bars. Etc.), • Adhering to all company and industry safety standards and protocols. Understanding of industry buy-off requirements, company specific handling & FOD requirements, product identification requirements, filling out company paperwork properly (MOT, Inspection Travelers, Job Sheets, etc.), • Maintaining correct part counts on the MOT for the operations performed, • Ability to hold tolerances of .0002” - .0005” while maintaining a high level of productivity, • Able to work independently and stay on task – operate 2 machines regularly, • Ability to problem solve and communicate process improvement suggestions with management, • Communicate any job-related issues/questions (part feature, program, inspection, etc.) to lead personnel for resolution and or clarification, • Familiarity with Mazak machines a plus, • Proficient with standard types of measuring inspection equipment to verify machined dimensions or product – Indicating Micrometers, Bore Gages, Sunnen Gage, & Test Indicators, • Read and interpret of B/P’s including assemblies, dimensions, tolerances, symbols, notes, abbreviations, GD&T (geometric dimensioning and tolerancing), and any other standard nomenclature per customer, government, or industry standards and following directions, • Ability to read and interrupt G & M machine codes and program understanding is a plus, • Experience holding tolerances of .0002” - .0005” and surface finish requirements of 16 is a plus, • Strong attention to detail, quality-focused, and willing to learn, • High School or GED, • 5+ years’ experience preferred but not required, • Ability to use computer software, company ERP system, clocking in and out of jobs, etc., • Familiarity with Mazak machines a plus, • Familiarity with live tooling a plus The Company is equal opportunity employer providing competitive wages and benefits. Medical, dental, vision, disability and life insurance available. 401(k) with company match. This is an equal opportunity employer and will not discriminate against any employee or applicant due to age, race, disability, veteran status, religion, sexual orientation, gender or any other protected classification. VEVRAA federal subcontractor. This company provides provide equal employment opportunities to applicants without regard to race, color, religion, gender, age, national origin, or disabilities in compliance with federal and state laws including: • The Civil Rights Act of 1964 as Amended, • Age Discrimination Act of 1967 as Amended, • Rehabilitation Act of 1973, • Vietnam Era Veterans Readjustment Act of 1974, • Americans with Disabilities Act Amendment Act of 2009 (ADAAA), • The Wagner-Peyser Act as Amended., • The Workforce Innovation and Opportunity Act, • Fair Credit Reporting Act, 15 U.S.C. 1681 et seq

Job Description ABOUT THE COMPANY Playa Bowls is New Jerseys Original Acai Shop, and our mission is to serve the highest quality, innovative products to support healthier lifestyles and inspire a world of fun, excitement, and togetherness. At Playa Bowls, we live our brand in our actions and in the relationships that we make in our communities. Our focus is to provide a bowl full of deliciousness to every guest, delivered with authenticity and passion for the Playa way. What began as a pair of blenders, a patio table, and a fridge has flourished into a 300-unit operator and franchisor of the leading fast casual restaurant concept. Playa Bowls added 70+ locations in 2024 and are on target to add as many 90 new locations in 2025. Our continued rapid growth has created the opportunity for an individual who will help us with continuing to grow our brand! WHAT WE OFFER Playa Bowls offers Competitive Compensation, Remote Work-Environment, Medical, Dental, Vision, Domestic Partner Benefits, Spouse & Children Benefits, 401K Plan, Health Savings Account, Paid Time Off, Paid Holidays, Flight/Hotels paid for, Incentive Bonus Plan participation, Mileage Reimbursement, Cell Phone Stipend, Company Card Provided. WHO YOU ARE The Construction Manager (CM) is a key member of the Development team, reporting directly to the Director of Construction.The role will provide oversight and assistance to new and existing franchisees in the coordination, planning and implementation of new shop construction ensuring that schedules and budgets are followed. They will also serve as the Project Manager (PM) for communication and coordination with cross-functional teams within Playa Bowls. This position may also be responsible for the oversight and execution of company owned new shop projects GENERAL DESCRIPTION • Fully Remote - Must be able to travel up to 50% of the time., • Utilizes company’s project management platform (FranConnect – Opener Module, along with GC project trackers) to ensure that franchisees, general contractors, architects, and engineers (A&E), national account vendors, operations, training, supply chain, and other cross-functional teams are aligned to support timely and cost-effective development., • Provides leadership in initial planning stage by collaborating with franchise owners, operators, architects, engineers, or other involved parties; use your experience and expertise to proactively identify and solve for avoidable risks across new store opening projects., • Schedules and coordinates projects in logical steps and budget the time necessary to meet each deadline., • Prepares and submits budget estimates and regularly communicates with stakeholders concerning budget progress and costs., • Ensures adherence to the budget and schedule when unexpected complications or issues arise, mobilize resources to make quick and necessary adjustments to remain on schedule and on-budget., • Plans, coordinates, organizes, oversees, and directs activities regarding the construction and maintenance of assigned structures, facilities, and systems., • Ensure safety standards and guidelines are followed on the jobsite and that all safety codes are met in construction., • Develops standards for store buildouts including criteria for approved GCs, budget formats, contracts, vanilla shell requirements and other tools necessary to ensure timely and efficient store buildouts. Support franchise owners on the development of construction budgets, identifying qualified GCs, contract negotiations, revisions, and additions and adherence to brand standards., • Collaborates with stakeholders, supervisory staff, contractors, and design professionals to discuss and resolve problems, including work procedures, complaints, and construction or design issues., • Manages and leads actions that are necessary due to delays, bad weather, or emergencies at construction sites., • Develops and maintains good working relationships with a variety of people, including owners, managers, designers, supervisors, tradespersons, and craft workers., • Bachelor’s degree preferred in related field (Construction, Architecture or Engineering, • Proficient in Google Suite, FranConnect (Franchise Management Software), and Microsoft Office for collaboration and communication, • 5+ years of construction management experience with a QSR or fast casual brand opening 100+ locations annually., • 5+ years of restaurant development project management experience preferred, • Thorough understanding of engineering, architectural, and other construction drawings, AIA standards, permitting processes, and building codes, particularly as pertain to restaurant construction, • Thorough understanding of contracts, plans, specifications, and regulations., • Demonstrated ability to be highly organized with the ability to handle multiple projects at once, • Must strive for excellence and have only the highest integrity in their intentions, • Ability to make intelligent and quick decisions, work well under pressure, and when faced with unexpected occurrences or delays., • Must be able to traverse and inspect all areas of jobsite in all types of weather; this may include walking, climbing, reaching, bending, crawling, or stretching., • Ability to travel up to 50% of the time, • Must be able to lift up to 50 pounds occasionally, • Must be able to engage in problem-solving skills to help identify and solve potential issues Inspire and support our communities one bowl at a time. VALUES Real Deal. Playa Passion. Powerhouse. Big Wave Chaser. Dawn Patrol “Playa Bowls is an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate on the basis of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law.”

Job Description Ardurra is seeking a Project Civil Engineer to join our Municipal Group in Phoenix, Arizona! Join Ardurra and help design Arizona’s future! We’re looking for a Licensed Project Civil Engineer to join our Site/Civil team in Arizona. In this role, you’ll work on diverse projects—residential, commercial, municipal, and parks—while enjoying a collaborative culture and opportunities for growth. Why Ardurra? • Hybrid Work Options after onboarding, • Competitive Salary & Comprehensive Benefits, • Professional Development & Career Growth, • Develop project design concepts and criteria, • Produce civil engineering plans for public and private projects, • Organize project files and records for efficient delivery, • Assist with client interface, budgets, and schedules for on-time/on-budget completion, • Recommend design alternatives and support proposal preparation, • Coordinate with design teams, clients, contractors, and permitting agencies, • Perform quantity takeoffs and cost estimates, • Analyze stormwater drainage and prepare technical reports, • Review designs using AutoCAD Civil 3D and Hydraflow, • Participate in budget and QC reviews, • Support construction administration, including RFIs and shop drawings, • Bachelor’s Degree in Civil Engineering, • Arizona PE license (or ability to obtain via reciprocity), • 5+ years of experience in site design and permitting, • Proficiency in Civil 3D, hydrology/hydraulic analysis, and pipe network analysis, • Strong communication, organizational, and problem-solving skills, • Highly self-motivated and able to work independently while collaborating as needed NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-LC

Job Description Job Title: Mechanical Engineer – Generator & Fuel Systems Location: Goodyear, Arizona, Phoenix, AZ Department: Engineering Reports To: Director of Engineering Employment Type: Full-Time | On-Site Company Overview GTI Energy designs and manufactures complex modular systems supporting power generation platforms, modular data center infrastructure, energy storage, defense, and industrial markets. Operating in a high-mix, engineered-to-order environment, GTI delivers integrated generator systems, steel enclosures, fuel systems, and mission-critical modular infrastructure. Our engineering team works at the intersection of design and manufacturing, where technical decisions directly impact fabrication, assembly, field installation, and long-term product performance. Position Overview GTI Energy is seeking a Mechanical Engineer to own the full mechanical design of generator systems from concept through production launch. This role is responsible for enclosure systems, base frames, fuel systems, airflow management, exhaust integration, and mechanical packaging into a manufacturable end product. The Mechanical Engineer will operate at the system level, not just component design. This role requires ownership of the physical product functioning as intended in real-world conditions while partnering cross-functionally with Electrical Engineering, Structural Engineering, Manufacturing, Supply Chain, Quality, and Operations. The ideal candidate combines strong mechanical design fundamentals with practical experience in tanks, fluid systems, thermal systems, sheet metal, weldments, and industrial equipment packaging. Key Responsibilities Generator System Design Ownership • Own full mechanical design of generator systems from concept, prototype, validation, and production release, • Develop integrated system layouts including enclosure, fuel systems, radiator systems, exhaust systems, service access, and structural packaging, • Ensure designs support manufacturability, installation, serviceability, lifting, transport, and long-term durability, • Design generator enclosures, skid bases, and structural frames that align with fabrication and assembly capabilities, • Develop layouts for component placement, maintenance access, airflow clearance, lifting points, and shipping requirements, • Design weldments, sheet metal assemblies, and bolted mechanical structures for production readiness, • Own fuel system design end-to-end including subbase tanks, belly tanks, day tanks, and associated fuel delivery systems, • Design UL 142 compliant storage tanks including double-wall construction, leak detection, venting, fill systems, and containment features, • Size fuel systems to meet runtime requirements, customer specifications, and application demands, • Define and route all fuel piping, tubing, hoses, and mechanical connections throughout the system, • Design for vibration resistance, thermal expansion, pressure integrity, and serviceability, • Ensure long-term reliability of fluid systems through proper component selection and installation methods, • Own generator airflow and thermal system performance including intake air, radiator integration, compartment cooling, and exhaust heat management, • Design airflow paths to ensure operation at worst-case ambient conditions without derating or overheating, • Evaluate fan performance, pressure drop, recirculation risks, and enclosure heat rejection, • Design exhaust routing, silencers, flex sections, and thermal shielding while maintaining acceptable backpressure limits, • Coordinate packaging space and provisions for aftertreatment or emissions equipment where required, • Drive manufacturable designs aligned with welding, fabrication, machining, paint, and final assembly capabilities, • Work directly with shop personnel to resolve fit-up, tolerance, and production issues quickly, • Improve designs based on production feedback to reduce labor hours, improve quality, and increase repeatability, • Participate in prototype builds, heat runs, system validation, and production troubleshooting, • Diagnose root causes of thermal, fuel, vibration, packaging, or durability issues and implement corrective actions, • Support continuous improvement through Root Cause Analysis, 5 Whys, and Fishbone methodologies, • Partner with Electrical Engineering on controls, harness routing, battery systems, and integrated power components, • Coordinate with Supply Chain on sourced components, lead times, and alternate part qualification, • Support Quality and Operations teams during launch, production ramp, and field issue resolution, • Bachelor’s degree in Mechanical Engineering or related engineering discipline, • 5–10+ years of mechanical engineering experience in generator systems, industrial equipment, mobile equipment, power systems, HVAC, tanks, fluid systems, or similar hardware environments, • Experience designing weldments, sheet metal assemblies, mechanical packaging, and fabricated systems, • Strong understanding of fuel systems, piping, pumps, filters, valves, and fluid hardware integration, • Experience with thermal systems, airflow management, cooling systems, or heat rejection design, • Proficiency with CAD tools such as SolidWorks, Inventor, Creo, or similar platform, • Experience with diesel or natural gas generator systems, • Familiarity with UL 142 fuel tank requirements or related fuel storage standards, • Experience with modular data center power systems, standby power, or mission-critical infrastructure, • Background in fabrication-heavy or contract manufacturing environments, • Experience with FEA, CFD, or thermal modeling tools, • Exposure to Lean Manufacturing, Continuous Improvement, or new product introduction (NPI) processes

Job Description Summary: Responsible for programming using MasterCam, creating and editing cutter paths, setting up and operating CNC machines, reading blueprints, and performing precision measurements. This role is responsible for producing high-quality parts according to customer specifications and requires a strong understanding of CNC technology and lean manufacturing principles. Essential Duties and Responsibilities: • Operate CNC machines to produce complex parts and components, • Read and interpret blueprints and technical drawings, • Conduct precision measurements using micrometers and other measuring instruments, • Perform electrical discharge machining (EDM) and other advanced manufacturing processes, • Utilize power tools and hand tools to complete tasks, • Maintain a clean and organized work environment, • Troubleshoot and repair CNC machines and equipment, • Collaborate with other team members to improve manufacturing efficiency and quality, • Implement lean manufacturing techniques to reduce waste and improve productivity, • Proficiency in CNC machining, including experience with Micrometer and Precision measuring instruments, • Familiarity with CAM programming and Electrical discharge machining, • Strong background in Manufacturing and Lean manufacturing principles, • Knowledge of Mastercam software is a plus, • Proven experience as a CNC Machinist or in a related field, • Strong understanding of CNC technology and programming, • Experience with lathe machines and other CNC equipment, • Familiarity with precision measuring instruments and blueprints, • Knowledge of lean manufacturing principles and techniques, • Ability to work independently and as part of a team, • Strong problem-solving skills and attention to detail, • Physical stamina to lift and maneuver heavy equipment and materials, • Ability to work in a fast-paced manufacturing environment Ability to read and write in English, with solid understanding of proper grammar usage, sentence structure with average (or above average) spelling skills. Certificates and Licenses: None Supervisory Responsibilities: None Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Typical machine shop environment requiring safety glasses and select hearing protection. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to talk and hear. The employee is frequently required to sit and use hands to finger, handle, or feel. The employee is occasionally required to stand; walk; reach with hands and arms; climb or balance and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include Close vision, Distance vision, Peripheral vision, Depth perception and Ability to adjust focus. Job Type: Full-time Benefits: Medical; Dental; Vision; Life; STD; LTD; 401(k) with company match; Paid Time Off Out of state candidates are encouraged to apply. Cinova Medical will provide RELOCATION BONUS. Cinova Medical, Inc. is an EOE AA M/F/Vet/Disability Employer and Drug Free Workplace. Upon hire, Cinova Medical, Inc. uses E-Verify to verify employment eligibility for roles based in the United States.

Job DescriptionDescriptionWilson Engineers is an Arizona-based firm with a staff of more than 200+ personnel specializing in water and wastewater engineering and construction management services. We are dedicated to delivering ethical, reliable, high quality services to our clients based on innovation, while sustaining a challenging and rewarding work environment for our greatest assets, our employees. We are seeking an experienced Water/Wastewater-Project Engineer to join our team. This position requires 40 hours per week in our Tempe office. (This job is not remote.) Essential Duties and Responsibilities • Experience working in Water and Wastewater field. Relevant experience shall include design of treatment facilities, collection systems, booster and pump stations, water, reclaimed water, and wastewater master plans., • Experience with construction-related engineering services with the ability to review Shop Drawings, RFIs, issuing Engineers Directives etc., • Computer experience with Microsoft Word, Excel, and Outlook software capabilities. Requirements • Civil Engineering Degree (Professional Engineer (PE) license preferred)., • Minimum of two (2) to eight (8) years of relevant experience in Water/Wastewater related design and experience with construction-related engineering services., • Ability to work in a team environment with the work involving studies, detailed design and engineering services during construction., • Ability to take technical direction from Project Managers or Principals and complete design tasks and elements. Ability to coordinate with multi-disciplinary engineering teams. #LI-DH1 BenefitsThe comprehensive benefits plan offered by Wilson Engineers exceeds industry standards, and is aimed at meeting each employee's personal and professional expectations. Benefits include personal time off, paid holidays, medical, dental and vision coverage; plus a flexible spending plan and short and long-term disability. Wilson Engineers also helps in securing your financial future by offering 401k plans with employer matching.Benefits plan offered to our full-time employees: • Medical Plan, • Vision Plan, • Dental Plan, • Group Life Insurance, • Short Term Disability, • Long Term Disability, • Voluntary Term Life Insurance, • Liberty Mutual Insurance, • Personal Time Off (PTO), • Paid Holidays, • 401(K) Retirement Plan, • Section 125 Flexible Benefits Plan, • Tuition Reimbursement, • Employee Referral Bonus

Job Description Ardurra is seeking a Project Manager/Civil Engineer to join our growing team in Phoenix, AZ! Shape Arizona’s future with Ardurra! We’re seeking a Licensed Civil Engineer/Project Manager to join our growing Site/Civil team in Phoenix, AZ. In this role, you’ll lead innovative land development projects that enhance communities—from parks and recreation to stormwater systems—while enjoying a collaborative culture and work-life balance. Why Ardurra? • Hybrid Work Options after onboarding, • Competitive Salary & Comprehensive Benefits, • Professional Development & Career Growth Opportunities, • Manage and design civil engineering projects (public & private) including industrial, residential, commercial, and drainage/stormwater systems, • Collaborate with multidisciplinary teams (transportation, water/wastewater, surveying), • Oversee budgets, schedules, and client relationships for on-time, on-budget delivery, • Prepare proposals, scopes, fees, and RFP responses, • Supervise design activities for complex projects requiring cross-discipline coordination, • Bachelor’s degree in Civil Engineering or related field, • 5+ years of experience in civil engineering and project management, • Arizona PE license (or ability to obtain via reciprocity), • Familiar in reviewing and understanding drawing from AutoCAD Civil 3D, Microsoft Office, and Bluebeam, • Strong communication, leadership, and problem-solving skills Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-LC

Job Description We’re hiring CNC Machinists for a high-mix, low-volume precision shop supporting aerospace and defense programs. Expect complex prints, frequent setups, and tight tolerances where details matter—because these parts go into mission-critical systems tied to national security, not consumer products. Machinists here don’t just run parts—they run the process. You’ll own work from setup through final inspection, applying GD&T, managing tooling and offsets, making smart program adjustments when needed, and troubleshooting until you’re confident the job is right. We value people who bring strong machining fundamentals, think clearly under pressure, and take pride in clean, repeatable work. We’re hiring on 2nd shift and offer 10+ hours/week of overtime (always available, never required). If you want a shop where your skill and judgment matter—and where you can build a long-term career in aerospace—let’s talk. Compensation • $28 – $34 / hour base, • $3 / hr shift premium on 2nd, • Medical, dental, vision, • 401(k) with match, • PTO Responsibilities • Set up and operate CNC mills and lathes in a precision, job-shop environment, • Run work end-to-end: setup, run, inspect, document results, • Interpret complex blueprints, routings, and work instructions, • Apply GD&T to ensure parts meet critical functional requirements, • Select tooling, set offsets, and build effective workholding strategies, • Perform in-process and final inspection using micrometers, indicators, gauges, and other precision tools, • Hold tight tolerances (including tenths-level features where required) and own part quality from first piece to final run, • Read CNC programs and make edits/adjustments (feeds/speeds, offsets, tool comp, minor G/M-code edits as needed), • Troubleshoot dimensional, tooling, and process issues to restore quality and throughput, • Support both proven and new/unfamiliar jobs, dialing in processes efficiently Technical • 3+ years of CNC machining experience in a precision environment (more is welcome), • Strong ability to set up jobs independently (tooling, offsets, workholding, first article approach), • Confidence reading and interpreting complex prints and applying GD&T, • Proven experience holding tight tolerances and verifying them with manual inspection tools, • Ability to read CNC programs and make practical adjustments to maintain quality and throughput, • Read and write G/M-code (strongly preferred), • Solid machining fundamentals: speeds/feeds, tool selection, chip control, tool wear management, • Strong documentation habits and a quality-first mindset We’re looking for people who want more than a job—they want to build a career in aerospace and defense. You’ll do well here if you’re: • Coach-able: open to feedback, hungry to improve, and humble enough to keep learning, • Ownership-driven: you take responsibility for the work and don’t pass problems downstream, • Craftsmanship-minded: you care about doing it right, even when no one is watching, • Team-oriented: you communicate clearly, help others win, and learn from strong machinists around you, • Medical, dental, vision, • 401(k) with match, • PTO

Job Description Build Something Exceptional With Us Ascent Custom Millwork is a growing architectural millwork company known for craftsmanship, collaboration, and delivering high-quality custom solutions. We are seeking an experienced Purchasing Agent who thrives in a fast-paced, project-driven environment and enjoys being a key contributor to bringing complex millwork projects to life. If you enjoy working cross-functionally, managing details that make a big impact, and partnering with vendors to ensure projects stay on time and on budget, this role offers a strong opportunity to grow with an expanding organization. What You'll Do As our Purchasing Agent, you will play a critical role in the pre-production phase by ensuring materials are accurately specified, competitively sourced, and delivered to meet project schedules. Key responsibilities include: • Review project handoffs, drawings, and specifications from Sales and Estimating, • Perform material and hardware takeoffs and build bills of material within our ERP system, • Prepare and distribute drawing and scope packages to qualified vendors for pricing, • Evaluate vendor quotes based on quality, lead time, and project requirements, • Coordinate material samples, approvals, and lead times with project teams, • Write and manage purchase orders for shop materials and specialty items, • Track procurement status, costs, and changes within ERP, • Partner with Engineering and Production to identify value-engineering opportunities, • Monitor fabrication timelines and coordinate release dates with vendors and internal teams We're looking for someone who brings both technical knowledge and strong communication skills to the table. You'll be successful in this role if you have: • A solid understanding of architectural millwork materials, including veneers, laminates, core materials, hardwoods, and hardware, • The ability to read and interpret shop drawings, • Experience working with vendors and managing procurement timelines, • Strong attention to detail and comfort tracking costs and approvals, • Proficiency in Bluebeam and Microsoft Office (Excel, Word, Outlook), • Familiarity with AWI standards (preferred), • High School Diploma or equivalent required, • 3-5 years of experience in construction or manufacturing, • Architectural millwork experience strongly preferred, • Work on custom, high-end millwork projects, • Collaborate with experienced professionals across departments, • Be part of a company that values quality, accountability, and teamwork, • Opportunity for long-term growth as the organization continues to expand

Job Description Cirrus Aircraft’s Mission is to deliver an aviation experience that is the pinnacle of innovation, quality, and safety to our customers. Cirrus Aircraft is the recognized global leader in personal aviation and the maker of the best-selling SR Series piston aircraft and the Vision Jet™, the world’s first single engine Personal Jet and recipient of the 2017 Robert J. Collier Trophy. Founded in 1984, the company has redefined performance, comfort and safety in aviation with innovations like the Cirrus Airframe Parachute System® (CAPS®) – the first FAA-certified whole-airframe parachute safety system included as standard equipment on an aircraft. To date, worldwide flight time on Cirrus aircraft has passed 16 million hours and over 250 people have returned home safely to their families as a result of the inclusion of CAPS® as a standard feature on all Cirrus aircraft. Find out more at cirrusaircraft.com. Duties and Responsibilities/Essential Functions • Adhere to Cirrus Aircraft Standard Operating Procedures, • Comply with environmental health / safety policies and procedures, • Maintain the highest levels of professionalism in conduct and appearance while representing Cirrus Aircraft., • Observe & maintain all requirements & criteria set forth by the Cirrus Part 145 Repair Station Manual as applicable., • Read and understand maintenance manuals and other technical documents and identify repair procedure, • Assess and disposition aircraft ensuring compliance with all airworthiness requirements prior to conducting Cirrus Flight Training Operations, • Perform mission critical repairs, troubleshooting & return to service work as required IAW FAA regulations & all applicable technical data, • Review and research aircraft records, • Evaluate & interpret aircraft data, • Diagnosing mechanical / electrical systems, • Utilize proper diagnostic / test equipment, • Inspect replacement aircraft parts for defects, • Replace defective parts using approved tooling, • Assemble aircraft components & perform required measurement and testing / adjustments, • Install / load system software and databases, • Inspect complete work for compliance and performance standards, • Assist, support and participate in Cirrus Flight Training Center indirect activities such as moving aircraft, shop projects, and continuous improvement projects as assigned., • Training expected to be completed, • Complete 100% Cirrus CBT Training, • Complete 100% Cirrus University training, • Complete 65% Cirrus & supplier Training, • Complete 50% proficiency on core task lists SR & SF To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation’s may be made to enable qualified individuals with disabilities to perform the essential functions. Education Requirement(s): • FAA Airframe & Powerplant, • Valid State Driver License To perform the job successfully, an individual should demonstrate the following competencies: • Ensures Accountability: Holds self and others accountable to meet commitments., • Plans and aligns – Plans and prioritizes work to meet commitments aligned with the organizational goals, • Instills Trust: Gains the confidence and trust of others through honesty, integrity and authenticity., • 401(k) Plan: Dollar-for-dollar match up to 5% after 90 days, with 100% vesting., • Employer-Paid Coverages: Group term life, short- and long-term disability insurance., • Comprehensive Health Coverage: Medical, vision, dental, with additional dependent coverage options., • Free Health Tracking: With rewards for meeting health goals., • Generous PTO: 100 hours accrued within the first year., • Employee Referral Bonus: For referring talented candidates., • Career Development: Tuition reimbursement and professional growth opportunities., • Exclusive Discounts: Access to partner and marketplace discounts. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this position. Duties, responsibilities and activities may change at any time with or without notice. Work beyond 40 hours per week may be required. Cirrus is dedicated to a drug free work environment promoting equal employment opportunity. Qualified applicants will receive consideration for employment without regard to race, sex, national origin, color, age, disability, religion, pregnancy, veteran status, marital and family status, sexual orientation, receipt of public assistance, genetic information or any other characteristic protected by applicable law.

Job DescriptionLooking for a Journeyman Plumber skilled in commercial construction. Must be proficient in commercial plumbing, new construction services, and other ground-up projects including restaurants, retail, corporate offices, medical facilities, and much more. Lead a team and perform all duties for all stages of the jobs from the ground up. Responsibilities: • Commercial plumbing installation from Building stack out to multi-story building plumbing and large mechanical rooms., • Read and interpret plans and building specifications., • Use of copper, cast Iron, PVC, CPVC, PEX, and other piping., • Install grease traps, oil interceptors, lint interceptors, and all utility hookups., • Install water, gas, sewer, and grease lines., • Set all fixtures and plumbing per plans., • Involve cutting, threading, fitting pipes, valves, and caulking., • Will occasionally be on call.Qualifications:, • 4+ years of commercial plumbing experience such as corporate offices, dining establishments, educational institutions, and federal contracts., • Ability to read plans and shop drawings., • Must know ADA plumbing dimensions., • Possesses hand tools and trade-specific tools., • Ability to direct the work of a helper or apprentice., • Able to work from ladders and lifts from various heights., • Ability to operate machinery such as mini excavator, tamp, skid steer, scissor lift, and other equipment as needed., • Ability to pass background screening, MVR, and drug screening.