Software engineer jobs in Vista, CaliforniaCreate job alerts

Job DescriptionDescription: Our client, a leader in satellite broadband services, has an excellent opportunity for a Systems Integration & Test Engineer (Space Systems) to work on a contract opportunity. Work will be on-site in Carlsbad, CA. The System Integration and Test Engineer to support the development and testing of cutting-edge space systems, including our space vehicle and associated payloads. This is a hands-on, lab-based role focused on integrating hardware and software systems, validating space communications technologies, and supporting launch-readiness activities. Due to client requirement, applicants must be willing and able to work on a w2 basis. For our w2 consultants, we offer a great benefits package that includes Medical, Dental, and Vision benefits, 401k with company matching, and life insurance. Rate: $50 - $100 / hr. w2 Responsibilities: • Set up and maintain lab environments for testing space hardware and software., • Develop and execute Python-based test scripts for automation and validation., • Integrate and test embedded software running on space vehicles., • Work with ICDs (Interface Control Documents) and manage data flows between systems., • Layer higher-level operational command sequences over basic system commands., • Collaborate with internal teams and third-party vendors to verify software and hardware interoperability., • Support testing of payload control software and space terminal systems., • Analyze system behavior in orbital contexts, including LEO and GEO dynamics., • Assist in diagnosing, upgrading, and remotely managing software on space assets., • Contribute to the development and validation of free-space optics and RF communications systems., • Experience or strong interest in space systems, orbital mechanics, and satellite communications., • Background in system integration, software testing, and lab setups., • Familiarity with scripting (Python) and automation tools., • Understanding of hardware/software interactions, especially in space environments., • Knowledge of space-specific challenges such as remote software loading, fault recovery, and data routing through third-party communications buses., • Basic understanding of RF propagation, free-space optics, and antenna performance metrics., • B.S. in Computer Science, Mathematics, or Engineering or equivalent work experience, • Experience with space development and testing tools (e.g., Cosmos)., • Exposure to voltage measurement, signal processing, and system diagnostics., • Strong analytical skills and ability to work independently in a fast-paced R&D setting. Skills, experience, and other compensable factors will be considered when determining pay rate. The pay range provided in this posting reflects a W2 hourly rate; other employment options may be available that may result in pay outside of the provided range. W2 employees of Eliassen Group who are regularly scheduled to work 30 or more hours per week are eligible for the following benefits: medical (choice of 3 plans), dental, vision, pre-tax accounts, other voluntary benefits including life and disability insurance, 401(k) with match, and sick time if required by law in the worked-in state/locality. Please be advised- If anyone reaches out to you about an open position connected with Eliassen Group, please confirm that they have an Eliassen.com email address and never provide personal or financial information to anyone who is not clearly associated with Eliassen Group. If you have any indication of fraudulent activity, please contact . About Eliassen Group: Eliassen Group is a leading strategic consulting company for human-powered solutions. For over 30 years, Eliassen has helped thousands of companies reach further and achieve more with their technology solutions, financial, risk & compliance, and advisory solutions, and clinical solutions. With offices from coast to coast and throughout Europe, Eliassen provides a local community presence, balanced with international reach. Eliassen Group strives to positively impact the lives of their employees, clients, consultants, and the communities in which they operate. Eliassen Group is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. Don’t miss out on our referral program! If we hire a candidate that you refer us to then you can be eligible for a $1,000 referral check!

Job Description Maintain a pristine, elevated, and consistent aesthetic and functional standard across all 30 studios, ensuring the client experience reflects the NAKEDᴹᴰ brand at every touchpoint. The Maintenance Supervisor (Branding & Aesthetic Engineer) is the guardian of the NAKEDᴹᴰ studio experience. This role requires a unique mix of technical skill, creative problem-solving, and brand loyalty. Candidates must be willing to travel • Aesthetic Oversight, • Weekly visual walkthroughs (in-person or via local manager photo/video submissions)., • Check decor, plants, signage, lighting, furniture arrangement, wall paint, mirrors, and uniform displays for brand consistency., • Ensure seasonal displays (if any) are on-brand., • Replace worn or damaged items immediately (pillows, rugs, chairs, etc.)., • Functionality & Equipment, • Verify all treatment equipment is functioning properly., • Confirm storage areas are organized and stocked for quick access., • Test lighting controls, music systems, and HVAC., • Report and coordinate repair or replacement for malfunctioning items., • Brand Standards Compliance, • Use the NAKEDᴹᴰ Aesthetic & Experience Checklist (custom doc we’ll make)., • Confirm each studio matches corporate-approved layouts, colors, scents, and background music., • Conduct quarterly “surprise checks” to catch details that may get overlooked., • Preventative Maintenance, • Schedule routine deep cleans with contracted cleaning teams., • Perform minor touch-up painting personally (walls, trim, cabinetry, etc.) to maintain a flawless studio appearance., • Maintain a replacement cycle for plants, linens, and high-touch items., • Vendor Coordination, • Coordinate and schedule cleaning, repair, delivery, and other 3rd party vendor services as needed., • Coordinate, schedule and maintain recurring services, pick-ups and deliveries for all studios., • Conduct routine inspections and surprise visits to maintain high standards., • Coordinate with Studio Managers to address and prevent maintenance issues., • Manage vendor relationships for cleaning, repairs, technical services, and supplies., • Oversee recurring maintenance cycles (laundry, cleaning, paint, sharps pickups, water delivery, equipment upkeep)., • Track all replacements, repairs, and vendor services in a centralized log., • Ensure every detail - from scent diffusers and tech devices to pillowcases and alcohol dispensers - meets our company standards., • Maintain visual consistency across all studios (luxury minimal aesthetic)., • Ensure studios maintain operational functionality for maximum staff efficiency., • Basic to intermediate knowledge of electrical, plumbing, and HVAC troubleshooting., • Hands-on skills in touch-up painting, wall/trim repair, small carpentry, and furniture fixes., • Understanding of paint finishes, flooring care, and furniture maintenance to preserve a luxury aesthetic., • Familiarity with scent, lighting, and audio systems to maintain the brand ambiance., • Ability to track and manage inventory of high-touch items (linens, plants, décor, disposables)., • Experience coordinating with contractors and third-party vendors for larger-scale projects or specialized services., • Proficiency with File Sharing and reporting software (i.e. Excel, Google Sheets, Dropbox...)., • Strong eye for detail with a commitment to brand consistency and luxury minimalism., • Proactive problem solver with the ability to anticipate and prevent issues before they escalate., • Strong communication skills for working with Studio Managers and corporate leadership., • Ability to lift and move equipment/furniture when needed., • Comfortable with frequent travel between studios (approximately 50–70%)., • Prior experience in hospitality, retail, or luxury brand environments preferred., • Basic IT troubleshooting (Wi-Fi, music systems, tablets, and other studio devices) a plus.

Job Description The Software Test Engineer I, Mobile will help test mobile applications for the Informatix platform. This includes active participation in all stages of the software development life cycle, including sustaining. Projects will include, but not be limited to, mobile applications (IOS & Android), Windows applications and frameworks, embedded systems, and data aggregators/gateways. Essential Duties and Responsibilities • Work along with a test lead in a development team to conduct complex software testing activities including design and execution of software test plans and test cases to ensure they meet quality, reliability, and design requirements, • Analyze functional, and business requirements and develop test automation where appropriate, • Execute automated and manual tests in a continuous integration environment to ensure software quality is fit for purpose, • Perform integration and system level testing of software and software/hardware systems, • Contribute to innovation and process improvement efforts, • Perform task estimation and develop software projects according to project plan, • Provide proactive, transparent, and concise communication on project status, • Develop documentation related to software development projects (design artifacts, test plans/cases, etc.) The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • 0 - 3 years of experience testing applications for mobile operating systems, • Experience with edge testing mobile applications (IOS & Android), • Experience with Agile methodologies preferred, • Experience with programming/scripting languages (such as C#, Python, Java Script, etc.), • Experience with creating automated UI testing, • Experience with automated integration tests, • Understanding of .Net Framework, .Net Core, applications and deployment in native and virtualized environments a plus, • Experience with testing software for Medical Devices (IEC 62304) a plus, • Creative and resourceful problem solver with ability to take the big picture into account, • Excellent written and verbal communication Education and Experience • 0 - 3 years of commercial software testing experience in R&D required, • BS/MS degree in Computer Science, Computer Engineering, or related field preferred For roles based in the United States that require access to hospital facilities, must be eligible for and maintain credentials at all required hospitals, including meeting any applicable physical requirements or vaccination requirements (including the COVID-19 vaccine, as applicable). ATEC is committed to providing equal employment opportunities to its employees and applicants without regard to race, color, religion, national origin, age, sex, sexual orientation, gender identity, gender expression, or any other protected status in accordance with all applicable federal, state or local laws. Further, ATEC will make reasonable accommodations that are necessary to comply with disability discrimination laws. Salary Range Alphatec Spine, Inc. complies with state and federal wage and hour laws and compensation depends upon candidate’s qualifications, education, skill set, years of experience, and internal equity. $85,000 to $95,000 Full-Time Annual Salary

Job Description About Us: Technology Associates is a leading provider of wireless telecommunications solutions. We are dedicated to delivering innovative and reliable services to our clients. We are seeking a highly skilled and motivated Professional Engineer to join our dynamic development services team. Job Summary: The ideal candidate will be a Professional Engineer – EIT with experience in Engineering and Wireless Telecom. This role involves the structural engineering design of wireless communication projects, including new and existing building structures, non-building structures, and non-structural components. Responsibilities include preparing formal reports, calculations, and analyses, determining structural requirements with project design team members, clients, contractors, building officials, and other consultants. The candidate will also provide quality control review of engineering services performed by other engineers. Key Responsibilities: • Perform structural and mount analysis and design for existing and new building structures, non-building structures, and non-structural equipment, including their respective anchorage, foundation elements, and mount design., • Design modifications for tower reinforcing, extensions, and foundations., • Coordinate structural design requirements with A&E Project Managers, Drafters, Senior Engineers, Clients, Building Officials, Contractors, and other External Consultants., • Prepare engineering reports and documents communicating engineering results., • Review Quality Assurance - Quality Control (QA-QC) and final review on structural analysis reports and drawings., • Assist with construction administration activities, including field surveys and shop drawing or RFI coordination., • Perform site visits and prepare field reports to document existing site conditions., • Answer structure-related inquiries from internal and external customers., • Coordinate with building officials and other jurisdictional entities to demonstrate code compliance for obtaining all required building permits and governmental approvals., • Adhere to all federal, state, local, and company safety requirements., • Domestic travel as required., • Perform other engineering duties as required and assigned. Qualifications: • Bachelor’s degree in Civil Engineering or Structural Engineering; Master’s degree preferred., • Must have a minimum of 3 years of structural engineering experience with wireless telecommunications or broadcast towers preferred., • EIT working towards P.E. License with the ability to obtain multi-state licensure as required., • Technical communication and documentation skills., • Ability to organize and prioritize tasks to meet deadlines., • Self-driven with the ability to work effectively independently or as part of a group, utilizing resources as required to complete engineering tasks successfully., • Knowledge of codes and specifications: IBC, TIA-222, ASCE, etc., • Proficiency in common engineering software programs: tnxTower, Risa 3D, mathcad, and Enercalc., • Experience in developing construction documents and performing Mount Analyses and Structural Analyses or Assessments for Monopoles, towers, tanks, buildings, etc., • Ability to manage multiple projects., • Knowledge of engineering design principles with various materials such as steel, concrete, wood, and masonry, and applicable design guides and standards., • Familiarity or experience with steel shop fabrication processes and/or knowledge of fabrication shop tools and capabilities is advantageous., • Proficiency in using Microsoft Suite products such as MS Word, Excel, Teams, and Outlook., • Ability to work within a team environment with individuals from various offices and disciplines through all phases of design., • Knowledge of construction practices and principles., • Professional written and verbal communication skills., • Ability to travel within the U.S. up to 10%., • Possess a valid driver’s license and meet the company's insurance carrier's criteria for coverage under the company's insurance policy. Preferred Qualifications: • EIT working towards Structural Engineering License., • Familiarity with AutoCAD drafting/modeling software., • Spanish Speaker. Benefits: • Competitive salary., • Comprehensive health, dental, and vision insurance., • Retirement savings plan with company match., • Paid time off and holidays., • Professional development opportunities. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Possess mobility to work in a standard office setting and to use standard office equipment, including a computer., • Regular communication (hearing/speaking)., • Vision requirements include close, distant, color perception, peripheral, depth, and ability to focus., • Regular standing, sitting, walking, use of hands and arms to reach, feel, and handle., • Climbing, balancing, stooping, kneeling, crouching, or crawling; climbing to include heights up to 2000 feet., • Ability to travel between office locations and to client and/or vendor sites., • Ability and license to drive a motor vehicle., • Ability to lift, push, pull up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Noise conditions range from very quiet to some noise., • Exposure to dust, dirt, heat, cold, odors, fumes, wetness, and humidity., • Heights up to 2000 feet., • Varying temperatures and lighting conditions, including rain, snow, wind, and extreme temperatures., • Varying field terrain, i.e., rough landscape.

Job Description Compensation Package • The approximate base salary range is $65,000 - $85,000 (Incumbent’s final compensation is determined on experience, knowledge, abilities, etc.)., • Performance Bonus & Profit-Sharing Bonus., • 401k + Company Match., • Open Vacation Policy., • Paid Holidays., • Paid Parental Leave., • Health, Vision, Dental, Life Insurance, Disability. The CAD Drafter / Designer position is a solid foundation for a career in architecture, process equipment/piping design, and facility design. The role adequately creates drawings using computer-aided design (CAD) software both in 2D and 3D formats in designing mechanical, electrical, piping, plumbing, and equipment layouts for our design build food and beverage process facility projects. The role will require knowledge in areas architectural concepts, practices, regulations, standards, and building materials. Responsibilities include but not be limited to: Responsibilities • Create design drawings with computer-aided design (CAD) software both in 2D and 3D formats, at the direction of engineers and more senior designers, • Coordinate with Designers, Architects, Engineers, and Project Managers to produce design drawings per project specifications., • Design architectural drawings, mechanical/electrical/plumbing drawings, piping and instrumentation diagrams (P&IDs), equipment layouts, and piping plans., • Analyze available information to determine and plan the best approach to develop and complete design drawings, • Ensure drawings comply with building regulations and architectural standards, • Prepare documents to a level consistent with set quality standards while maintaining project schedules, • Take responsibility for the development and coordination of small drawings sets., • Work with client and engineering disciplines to define requirements in the preparation of design and construction documents, • Check finished drawings against markup and CAD Standards, • Manage multiple tasks and meet established deadlines, • Work with BIM360, Navisworks and MS Office (Outlook, Word and Excel), Computer-aided design (CAD), AutoCAD 2020 and Plant 3D, • Assist construction managers with coordination issues in the field., • Researching CAD drafting / designing best practices, • Associate Degree is required. A bachelor’s degree in an engineering-related filed is preferred., • 1-5 years of work experience or schooling in computer-aided drafting and design setting for food and beverage processing facilities or similar production facilities., • 1-5 years of work experience or schooling in AutoCAD, • 1-5 years of work experience or schooling in Plant3D, CADWorx or similar programs, • Revit, Inventor experience a plus, • Experience with design of Food and Beverage processes a plus, • Prolonged periods sitting at a desk and working on a computer. We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job DescriptionSalary: Position Description The Clinical Engineer is a skilled data-savvy contributor who receives and organizes inbound clinical data in various formats from multiple research sites engaged in Carlsmed-sponsored studies. The role involves receiving, vetting, and forwarding medical images to measurement services and parsing large data sets into subsets for analysis. Key Responsibilities • Receiving and preparing incoming data from multiple clinical studies, • Sorting and organizing information in various formats, including numerical values, categorical attributes, medical imaging, patient surveys, and free-text medical notes, • Organizing and forwarding medical images to measurement services, • Collating and formatting data for statistical analysis, • Creating tables, charts, and figures for internal and external reports., • Preparing PowerPoint presentations and manuscript materials Skills • Data organization: tabulating, sorting, and analyzing scientific data, • Advanced user of MS-Office software (Word, Excel, PowerPoint), • Desired: Proficient with Python for data cleaning and formatting, • Effective communication and presentation skills., • Continuous issue detection and resolution. Qualifications • BS degree in a technical field such as Engineering, Life Sciences, Computer Sciences, Mathematics or related medical/scientific field. MS degree preferred., • Experience with digital image software, preferably medical imaging software, • Highly desired: previous contributions to biomedical or biological studies, • Highly desired: knowledge/experience in spine/orthopedics Equal Opportunity Employer Carlsmed is an equal-opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Carlsmed is committed to providing reasonable accommodation for candidates with disabilities in our recruitment process. If you need any assistance or accommodation due to a disability, please let us know. Compensation We are pleased to provide a competitive salary and benefits. Our benefits reflect our investment in the overall health and well-being of our employees and their families. including paying 100% of monthly healthcare, dental and vision insurance premiums, a 401(k) plan with employer matching, and unlimited PTO. The expected pay range for this position is $95,000 - $120,000. Compensation may vary based on related skills, experience, and relevant key attributes.

Job Description Essel is looking for a motivated and skilled Civil Design Engineer to join our dynamic team. In this role, you will be responsible for a variety of tasks related to civil engineering project design and development. You will engage in site assessments, prepare engineering calculations, and create detailed design drawings to support a wide range of projects. Your primary focus will be on delivering innovative and sustainable solutions while collaborating closely with project managers and other engineering disciplines. The ideal candidate will have a strong foundation in civil engineering principles and a commitment to high-quality work. Requirements The selected candidate will have the following qualifications: • Bachelor’s degree in Civil Engineering or a related field., • Professional Engineering (PE) license or the ability to obtain it within a specified timeframe., • A minimum of 3-5 years of experience in civil design, preferably in land development, transportation, or municipal projects., • Proficiency in AutoCAD Civil 3D and other design software., • Strong analytical skills and the ability to solve complex engineering problems., • Excellent communication skills, both written and verbal., • A team player with a proactive approach to work. Our employees enjoy an excellent benefit package including medical, dental and 401(k) Plan. Compensation package commensurate with candidate’s experience and qualifications.

Job DescriptionSalary: Position Description The Staff Concept Engineer will lead the design, prototyping, and validation of innovative concepts that integrate surgical workflows, imaging, and enterprise systems. This role is dedicated to exploring, maturing, and transitioning early-stage ideas into viable solutions that can progress into product development. Success requires deep technical expertise, rapid prototyping skills, and strong cross-functional collaboration with clinical, product, and engineering teams. Key Responsibilities • Lead the design and development of proof-of-concept applications, models, and simulations to evaluate feasibility and clinical utility., • Collaborate with clinicians, product managers, and engineers to refine requirements and identify unmet needs., • Establish structured innovation processesfrom ideation through technical feasibility, clinical validation, and transition into product development., • Explore and apply emerging technologies (AI/ML, advanced visualization, generative design, 3D graphics) to surgical planning and workflow solutions., • Partner with regulatory and quality teams early to anticipate compliance considerations., • Champion user-centered design and document findings for regulatory, clinical, and business review., • Mentor junior engineers while fostering a culture of creativity, experimentation, and disciplined execution., • Deliver validated prototypes on time and ensure effective handoff of selected concepts to development teams. Skills • Proven ability to deliver rapid prototypes in cloud, desktop, mobile, or 3D visualization environments., • Excellent communication skills to translate complex technical ideas for clinical and business audiences., • Strong system-level thinking to connect disparate technologies into cohesive solutions., • Ability to balance creative exploration with disciplined execution under regulatory constraints., • Demonstrated ability to thrive in fast-paced, cross-functional environments., • Demonstrated facilitation, coaching, and conflict-resolution skills. Qualifications • Bachelors or Masters degree in Computer Science, Biomedical Engineering, or related field., • 10+ years of software development experience., • Familiarity with FDA, HIPAA, ISO 13485/IEC 62304, and medical device software compliance., • Experience applying AI/ML for imaging, planning, or workflow automation strongly preferred. Equal Opportunity Employer Carlsmed is an equal-opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Carlsmed is committed to providing reasonable accommodation for candidates with disabilities in our recruitment process. If you need any assistance or accommodation due to a disability, please let us know. Compensation We are pleased to provide a competitive salary and benefits. Our benefits reflect our investment in the overall health and well-being of our employees and their families. including paying 100% of monthly healthcare, dental & vision insurance premiums, a 401(k) plan with employer matching and unlimited PTO. The expected pay range is: $170,000 to $190,000 annually. Compensation may vary based on related skills, experience, and relevant key attributes.

Job Description Job Summary Dennis Group is looking for an experienced CAD Drafter Designer to plan, design and implement mechanical systems for industrial food and beverage production facilities. You will work on multi-disciplinary project teams and have an opportunity to perform, practice, and apply a wide range of design engineering skills in this role. You will adequately create drawings using computer-aided design (CAD) software both in 2D and 3D formats for mechanical, electrical, piping, plumbing, and equipment layouts for our design build food and beverage process facility projects. The role will require knowledge in areas architectural concepts, practices, regulations, standards, and building materials. Responsibilities • Act as overall project drafter/design coordinator (coordination with other disciplines and design firms to create coordinated model), • Create design drawings with computer-aided design (CAD) software both in 2D and 3D formats, at the direction of engineers, • Coordinate with Designers, Architects, Engineers and Project Managers to produce design drawings per project specifications, • Read architectural drawings, mechanical/electrical/plumbing drawings, piping and instrumentation diagrams (P&IDs), equipment layouts, and piping plans, • Analyze available information to determine and plan the best approach to develop and complete design drawings, • Ensure drawings comply with building regulations and architectural standards, • Prepare documents to a level consistent with set quality standards while maintaining project schedules, • Produce drawings for bid packages, • Contributes to developing CAD standards and best practices, • Coordinate and distribute project workload to team members, • Establish design criteria for assigned phase of a project requiring the application of basic drafting and designing principles, material properties, and a familiarity with construction, installation, and maintenance procedures, • Work with client and engineering disciplines to define requirements in the preparation of design and construction documents, • Check finished drawings against markup and CAD Standards, • Review manufacturers' or fabricators' prints for conformance with contract specification., • Provide junior design and drafting staff with sketches, layout concepts, and technical direction to support the development of final design drawings and refinement of technical requirements., • Manage multiple tasks and meet established deadlines, • Work with BIM360, Navisworks and MS Office (Outlook, Word and Excel), AutoCAD and Plant 3D, • Associate Degree is required. A bachelor’s degree in an engineering-related filed is preferred., • 8+ years of work experience in computer-aided drafting and design setting for industrial production facilities., • 8+ years of work experience in AutoCAD, Plant3D, CADWorx, Revit, Inventor or similar programs, • Prolonged periods sitting at a desk and working on a computer. We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job Description Validation Engineering for New Product Development & Sustaining Engineering with a focus on software systems. The Validation Engineer III is an advanced role responsible for leading significant validation projects and contributing to organizational process improvements. Under minimal supervision, the Validation Engineer III will work closely with Quality Engineering (QE), Research & Development (R&D), Marketing, and Regulatory to bring products to market while ensuring compliance to applicable standards and regulations. Essential Duties and Responsibilities • Leads design verification & validation activities for complex projects, ensuring deliverables meet quality, timeline, and compliance requirements, while providing clear direction to cross-functional teams., • Defines and executes comprehensive design verification and validation strategies for new product development, including authoring test plans and protocols, with an emphasis on developing processes in uncharted or ambiguous areas., • Drives innovation in verification & validation methodologies, developing advanced test methods, optimizing validation processes, and facilitating cross-functional problem resolution to achieve project goals., • Manual and automated system test method development and qualification., • Represents Quality Engineering when collaborating with designated personnel to develop various design controls documents per FDA guidance (General Principles of Software Validation), including but not limited to Requirements Specifications, Validation/Test Plan, Testing, Integration Test Scripts, Operational/System Test Scripts, and Validation Summary Reports., • Contributes to Risk Management efforts in accordance with ISO 14971., • Provides informal oversight and mentoring to less-experienced validation engineers., • Maintains regular and consistent attendance at the normal worksite. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Proficient in FDA Quality System Regulations (21 CFR Part 820) & (ISO 13485:2016), • Proficient in IEC 62304, IEC 60601 requirements, • Proficient in ISO 14971 requirements., • Understanding of ANSI C63:27 American National Standard for Evaluation of Wireless Coexistence requirements, • Experience with Test Case management software and ALM software (Polarion) is a plus., • Working knowledge of test method qualification methods (Gage R&R, Attribute Agreement Analysis) including competency using desktop lab equipment (function generators, oscilloscopes, etc), • Working knowledge of Statistical Process Control (SPC), Design of Experiments (DOE), and probability and statistics preferred., • Prior successful testing and validation of medical products through full life cycle including writing protocols, reports, and procedures required, • Demonstrates comprehensive knowledge of project management techniques to ensure predictability of complex cross-functional projects., • Ability to demonstrate technical expertise and communicate with internal and external customers and executive management., • Must be deadline-oriented and detail-oriented, an effective communicator, and able to work within a team environment. Education and Experience Bachelor’s degree in engineering or related field, with a minimum of six (6) years of medical device experience; OR Master’s degree in engineering or related field, with a minimum of five (5) years of medical device experience. CERTIFICATES, LICENSES, REGISTRATIONS ASQ CSQE or CQE preferred. For roles based in the United States that require access to hospital facilities, must be eligible for and maintain credentials at all required hospitals, including meeting any applicable physical requirements or vaccination requirements (including the COVID-19 vaccine, as applicable). ATEC is committed to providing equal employment opportunities to its employees and applicants without regard to race, color, religion, national origin, age, sex, sexual orientation, gender identity, gender expression, or any other protected status in accordance with all applicable federal, state or local laws. Further, ATEC will make reasonable accommodations that are necessary to comply with disability discrimination laws. Salary Range Alphatec Spine, Inc. complies with state and federal wage and hour laws and compensation depends upon candidate’s qualifications, education, skill set, years of experience, and internal equity. $107,000 to $117,000 Full-Time Annual Salary Please Note: The employer will not sponsor applicants for work visas for this position.

Job Description About the Job We are seeking talented individuals to support our building structural practice (Industrial & Commercial buildings). You will play a key role in the design, permitting, and construction of food facilities throughout the United States. You will be a member of our structural department and his/her responsibilities will include, but not be limited to: • Working independently on simple and complex projects, • Applying extensive and diverse knowledge of principles and practices for a wide range of materials and construction techniques., • Performing hand calculations and creating computer analysis models for structural design tasks., • Coordinating structural work with other disciplines, • Drafting sketches, contract drawings, and specifications using AutoCAD., • Reviewing project documentation for conformity and quality assurance., • Reviewing shop drawings, submittals, and calculations, • Estimating construction costs with quantity take offs and historic costs, • Conducting field inspections & condition assessments and prepare reports, • Bachelor's degree in Civil Engineering or Structural Engineering, • 8+ years of relevant structural experience (industrial and commercial building structure), • Proficiency with AutoCAD, • PE Registration, • Excellent oral and written communication skills., • Detailed planning and organization skills., • 8+ years of experience with structural analysis software, • SE Registration, • 5+ years of experience with RAM Structural System and RAM Elements, • Master’s degree in Civil Engineering or Structural Engineering We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job DescriptionSalary: Position Description Reporting to the Vice President, Surgical Planning Technologies, the Sr. Staff Software Engineer, Image AI and Modeling, leads the strategy, execution, and clinical validation of Carlsmeds imaging AI initiatives, focused on transforming raw medical scans into high-fidelity, clinically accurate 3D models. This role guides development across multiple imaging modalities (CT, MRI, X-ray), ensures regulatory compliance, and spearheads future capabilities in multi-modal model fusion. Key Responsibilities • Own development of AI-based segmentation and 3D reconstruction pipelines for CT, MRI, X-Ray, and multi-modal data., • Design and lead model retraining workflows within a regulatory framework (PCCP, 510(k))., • Build and curate annotated datasets for spine imaging (CT,MRI, & X-Ray)., • Drive adoption of self-supervised, cross-modal, and generative AI techniques., • Collaborate with clinical and product development teams to validate anatomical accuracy., • Coordinate model performance evaluation, golden dataset strategy, and toolchain development., • Collaborate with consultants, ML engineers and imaging scientists. Qualifications • Ph.D. or M.S. in Biomedical Engineering, Machine Learning, Computer Vision, or related field., • At least 8+ years in software development, including 5+ years focused on building deep learning models for medical imaging applications (segmentation, registration, 3D reconstruction), using Python-based frameworks., • Demonstrated proficiency with Python programming and scripting, particularly for data preprocessing, model development, and workflow automation., • Solid background in navigating regulatory environments, including FDA 510(k) and PCCP submissions., • Deep familiarity with spinal anatomy or orthopedic imaging workflows is highly desirable., • Proven track record leading cross-functional initiatives, collaborating across clinical, regulatory, and engineering teams., • Hands-on involvement with synthetic imaging techniques, including GANs and diffusion models., • Strong foundation in multi-modal learning and anatomical registration., • Well-versed in the FDAs Good Machine Learning Practice (GMLP) principles. Equal Opportunity Employer Carlsmed is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Carlsmed is committed to providing reasonable accommodation for candidates with disabilities in our recruitment process. If you need any assistance or accommodation due to a disability, please let us know. Compensation We are pleased to provide a competitive salary and benefits. Our benefits reflect our investment in the overall health and well-being of our employees and their families. including paying 100% of monthly healthcare, dental and vision insurance premiums, a 401(k) plan with employer matching, and unlimited PTO. The expected pay range is: $170,000 - $200,000 annually plus a bonus opportunity. Compensation may vary based on related skills, experience, and relevant key attributes.

Job DescriptionSummary Our North County San Diego-based client is a highly sought after commercial general contracting company with exponential growth and exciting opportunities. They are seeking aProject Engineer (PE) or Jr. Project Manager to assist with current projects on hand, as well as future ones. You must be an accountable project engineer who will be responsible for all engineering and technical disciplines that projects involve. You will schedule, plan, forecast, resource and manage all the technical activities aiming at assuring project accuracy and quality from conception to completion. Duties and Responsibilities • Prepare, schedule, coordinate and monitor the assigned engineering projects, • Monitor compliance with applicable codes, practices, QA/QC policies, performance standards and specifications, • Interact daily with the clients to interpret their needs and requirements and represent them in the field, • Perform overall quality control of the work (budget, schedule, plans, personnels performance) and report regularly on project status, • Assign responsibilities and mentor project team, • Cooperate and communicate effectively with the project manager and other project participants to provide assistance and technical support, • Review engineering deliverables and initiate appropriate corrective actionsQualifications & Requirements, • BS Degree in Construction Management, Construction Engineering or equivalent required, • Proven working experience as a Project Engineer, • Strong computer skills and proficiency in Microsoft Office, including Microsoft Project, • Excellent knowledge of design and visualizations software such as AutoCAD, • Familiarity with rules, regulations, best practices and performance standards, • Ability to work with multiple discipline projects, • Project management and supervision skills, • Decision-making ability and leadership skills, • Time management and organization skills, • Experience with BIM or Revit and LEED Accreditation a plus, • Must be able to work in a fast pace environment while maintaining teamwork and positive attitude, • 3-4 years of experience in a similar role required, • Construction: 2-4 yearsEmployment Type: Full time Location: Carlsbad, CA

Job DescriptionCompany Description The sky's not the limit at Nearmap We’re a SaaS company, with proprietary hardware and software that’s continuously advancing through our commitment to innovation. The sky’s the limit when it comes to what we can and plan to do for our customers. Our imagery is just the starting point. Our impact comes from our people, applying complex analysis, interpretation and artificial intelligence that opens up all sorts of possibilities for our customers. Job Description The Senior Solution Engineer, Insurance will be a technical expert and key contributor within the Solutions Engineering team at Nearmap, specifically focused on supporting clients in the property & casualty (P&C) insurance industry. This role will involve deep technical knowledge of Nearmap’s platform, including 2D, 3D, and AI technologies, to help clients solve business challenges related to underwriting, claims, and risk management. Working alongside cross-functional teams such as Product, Engineering, and Technology, the Senior Solution Engineer will develop tailored solutions and deliver compelling product demonstrations to showcase the value of Nearmap's content and technology in driving better decision-making and operational efficiency. Key Responsibilities: Client Engagement and Insurance-Specific Support: • Lead technical discussions with P&C insurance clients to understand their unique workflows in underwriting, claims, and risk mitigation., • Conduct customized product demonstrations showcasing Nearmap’s geospatial solutions, focusing on applications in claims assessment, risk scoring, and underwriting decisions., • Drive Proof of Concept (POC) processes to demonstrate the value of Nearmap’s solutions in specific insurance use cases, such as post-catastrophe analysis, risk profiling, and claims triage., • Respond to insurance-specific RFIs/RFPs, tailoring technical responses to address client pain points and regulatory requirements., • Collaborate with Sales, Product, and Engineering teams to create custom workflows that align with insurance customer requirements, leveraging Nearmap’s AI, 3D, and imagery capabilities., • Design and deliver workflows that support faster claims resolution, improved risk selection, and accurate property condition assessment., • Develop solutions that integrate Nearmap’s data into insurance client systems for use in applications like underwriting automation, claims automation, and geospatial risk modeling., • Support insurance clients with best practices for integrating Nearmap’s data with their systems, including underwriting platforms, GIS, and policy management systems., • Educate internal teams and clients on Nearmap’s roadmap with a specific focus on new features and enhancements relevant to insurance applications., • Provide training for Solutions Engineers and other technical staff on insurance-focused use cases, products, and best practices., • Create industry-specific technical content, such as whitepapers and presentations, to support customer onboarding and engagement in the insurance space., • Cultivate strong relationships with insurance clients, acting as a trusted advisor on how Nearmap’s technology can address their business goals in claims, underwriting, and risk assessment., • Regularly gather feedback from clients to ensure Nearmap’s solutions are delivering value in insurance-specific applications., • Act as the voice of the customer within Nearmap, advocating for product improvements that directly benefit insurance workflows.Qualifications 5+ years of experience in a technical role, with a strong preference for candidates with experience in technical presales or solution engineering in the insurance industry. • Bachelor’s degree in Geography, Engineering, or a related STEM field., • Direct experience supporting the insurance industry, particularly in property underwriting, claims processes, or risk analysis is preferred., • Proficiency in Python or another programming language (e.g., JavaScript, SQL) to build and support custom solutions., • Strong technical understanding of SaaS products, REST APIs, and geospatial data integration., • Experience in enterprise selling., • Expertise in geospatial data and remote sensing, with the ability to apply these to insurance-specific use cases., • Exceptional presentation skills, with the ability to communicate technical details to both insurance and non-technical audiences., • Familiarity with insurance-relevant technologies and datasets, such as condition scoring, damage detection, and AI-based risk modeling., • Self-driven, organized, and capable of managing multiple projects., • Customer-focused with strong interpersonal skills and a commitment to delivering value in every client interaction., • Ability to thrive in a fast-paced, dynamic environment and adapt to the changing needs of insurance clients., • Willingness to travel to meet with clients and attend industry events as needed. Additional Information Why you'll love working at Nearmap: We move fast and work smart; often wearing multiple hats. We adapted to remote working with ease and are continually looking at ways to improve. We’re proud of our inclusive, supportive culture, and maintain a safe environment where everyone feels a sense of belonging and can be themselves. At Nearmap, you can chart your own career path and see where our journey together might take you. With complex and fascinating work to challenge and inspire you, you might be surprised by the opportunities you discover. We've got so much more to share—come and explore with us! Nearmap does not accept unsolicited resumes from recruitment agencies and search firms. Please do not email or send unsolicited resumes to any Nearmap employee, location or address. Nearmap is not responsible for any fees related to unsolicited resumes.

Job Description Compensation Package • The approximate base salary range is $90,000 - $120,000 (Incumbent’s final compensation is determined on experience, knowledge, abilities, etc.)., • Performance Bonus & Profit-Sharing Bonus., • 401k + Company Match., • Open Vacation Policy., • Paid Holidays., • Paid Parental Leave., • Health, Vision, Dental, Life Insurance, Disability. As a design build engineering firm and general contractor that designs and builds food and beverage processing facilities, Dennis Group’s automation & controls engineers work closely with our process, packaging and building engineers to meet our clients’ expectations in startup, commissioning, and qualifying their food and beverage production facilities. The role requires regular onsite presence to ensure necessary diagnoses, troubleshooting, and operational startup of our client’s production lines, equipment, and facilities. Our automation & controls engineers are frequently facing engineering challenges in applying standard engineering techniques to design, develop, and maintain instrumentation or control systems. Both software and hardware design and troubleshooting skills and abilities is required for this role. Typical responsibilities include, but not limited to: Responsibilities • Handles moderately complex issues and problems and refers more complex issues to higher-level engineer, • With general supervision, designs and troubleshoot both software and hardware necessary for control systems utilizing PLCs for integration of manufacturing systems., • Automates manufacturing processes through the use of instrumentation or controls systems., • Design, diagnose, and troubleshoot network infrastructures - Ethernet, DeviceNet, AS-i, Profibus etc., • Develops new PLC applications, interfaces, or embedded controls, • Develops new or modifies existing set-up and commissioning of new facilities or upgrading of existing facilities, • Design, specify, wire, and procure control panel equipment, e.g. safety circuits, I/O, networks, etc., • Design, specify, and procure electrical equipment, e.g. MCCs, panelboards, transformers, etc., • Specify, procure, configure, and troubleshoot controls hardware and field instrumentation, • Assist with coordinating with other engineer disciplines, • Troubleshoots and resolves malfunctions and makes recommendations that will improve efficiency or quality of operations, • Develop bid documentation for Electrical, Automation, and Low Voltage (network, security) vendors, • Documents specifications and operating procedures, • Project primary client technical contact, • Interface and manage installation contractors during construction, • Researching Automation & Controls materials and best practices, • Supporting talent growth within our organization, • Degree in Electrical Engineering or a related field, • 4-7 years of experience with Allen Bradley/Rockwell, Siemens, GE Fanuc, Honeywell Systems., • 4-7 years of experience in Visual Basic, SQL, MS ACCESS Database programming skills a plus, • 4-7 years of experience with Design and implement process network infrastructure (Ethernet, Device Net, Control Net, ProfiBus, etc.), • 4-7 years of experience in an industrial manufacturing setting, • Database programming skills a plus, • Proficiency with MS Office and AutoCAD Required, • This role is client facing, those successful in this role are professional, self-motivated, and energetic individuals with excellent communication and inter-personal skills., • Prolonged periods sitting at a desk and working on a computer., • Prolonged periods of standing and walking during installation, commissioning and startup. We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job DescriptionSenior Systems Security Engineer Senior Systems Security Engineer Company Overview We have several locations across the country with our headquarters in the San Diego, CA area. We are a publicly traded communications software/hardware company that has proudly been in business for over 20 years! We are on a mission to provide the highest quality service possible and bridging the digital divide across the globe. We work across a variety of different industries and one of the first global leaders in our space that is constantly innovating and working with the latest technologies. Position Overview We are seeking a highly skilled Senior Systems Security Engineer to join our team. The ideal candidate will be responsible for ensuring the security of our systems and networks, employing advanced encryption techniques and security measures in compliance with Department of Defense (DoD) regulations. This role requires a deep understanding of security engineering principles and a commitment to safeguarding our technological infrastructure. Key Responsibilities • Design and implement security protocols for systems and networks to safeguard against vulnerabilities., • Evaluate and enhance existing security measures in compliance with DoD requirements., • Conduct risk assessments and develop mitigation strategies for potential security threats., • Collaborate with cross-functional teams to integrate security into product design and development processes., • Lead security audits and assessments to ensure compliance with industry standards and regulations., • Bachelor's degree in Computer Science, Information Technology, or a related field., • 5+ years of experience in systems security engineering or a related field., • Strong knowledge of encryption technologies and protocols., • Experience with FPGA design and implementation., • Familiarity with DoD security requirements and compliance standards., • Excellent problem-solving skills and ability to work in a team environment., • Medical, • Dental, • Vision, • PTO, • 401k w/ match, • Potential for RSUs - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. CyberCoders will consider for Employment in the City of Los Angeles qualified Applicants with Criminal Histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring (Ban the Box) Ordinance.This job was first posted by CyberCoders on 09/10/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job DescriptionFPGA Engineer FPGA Engineer Company Overview We have several locations across the country with our headquarters in the San Diego, CA area. We are a publicly traded communications software/hardware company that has proudly been in business for over 20 years! We are on a mission to provide the highest quality service possible and bridging the digital divide across the globe. We work across a variety of different industries and one of the first global leaders in our space that is constantly innovating and working with the latest technologies. Position Overview We are seeking a skilled FPGA Engineer to join our dynamic team. The ideal candidate will be responsible for designing, developing, and implementing FPGA-based solutions for various applications. This position requires a strong foundation in digital logic design and proficiency in VHDL. The successful candidate will work closely with cross-functional teams to deliver high-quality, reliable systems. Key Responsibilities • Design and implement FPGA architectures using VHDL., • Develop and execute test plans for FPGA designs to ensure functionality and performance., • Collaborate with hardware and software teams to integrate FPGA solutions into broader system designs., • Perform simulation and verification of FPGA designs to confirm compliance with specifications., • Bachelor's degree in Electrical Engineering, Computer Engineering, or related field., • Proven experience in FPGA design and development using VHDL., • Strong understanding of digital logic design concepts and methodologies., • Familiarity with scripting languages such as TCL and Python is a plus., • Experience with digital circuit board design and schematic capture is an advantage., • Medical, • Dental, • Vision, • PTO, • 401k w/ match, • Potential for RSUs - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. CyberCoders will consider for Employment in the City of Los Angeles qualified Applicants with Criminal Histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring (Ban the Box) Ordinance.This job was first posted by CyberCoders on 08/01/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job DescriptionAbout the Job We are seeking talented individuals to aid in the design and implementation of electrical systems and strategies as part of a broad engineering and architectural team. You will be a member of our Power Systems group and your responsibilities will include, but not be limited to: • CAD design of electrical systems, • Perform Arc Flash study calculations, • Improve calculation templates for electrical design, • Research and create new “Best Practice” recommendation in an electrical subject of interest related to the electrical construction industry.About You, • Proficiency with MS Office (Excel, Word, Access) and familiarity AutoCAD or similar software, • Familiarity with three phase power, the National Electric Code, wireless radio systems, fire and security systems, Fiber or LAN cabling is a plus., • 1+ year(s) of experience and/or internship(s) in an industrial manufacturing setting Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job Description Since 1996, RQC, LLC. has been a leading player in Southern California's robust commercial and governmental Design-Build economy. Headquartered in beautiful Carlsbad, CA, we are a full-service Design-Build company. We offer management of projects throughout the United States, with our field operations' team members who work on location for each of our projects. We specialize in fast-track projects in new commercial construction for both public and private clients, with a primary focus in the Department of Defense market. We are looking for Construction Quality Control Manager candidates to join our West Coast Field Operations team for military/federal projects located in San Diego County. Headquarter/Office assignment will be in Carlsbad, but specific construction project could be anywhere in San Diego County. QC Manager's are responsible for planning, coordinating, and implementing a project-specific quality control program, executing its performance according to contract requirements, completing administrative documentation on time, and cultivating customer satisfaction with the client, all in alignment with RQ's Mission, Vision, and Values. Local candidates will be given preference depending on location of project, though relocation or travel to on-site management will be required for the QC Manager position. The QC Manager position must work on-site. Pay: $100,000-$145,000 annually (depends on experience) Fringe Benefits: Vehicle Allowance, Medical/Dental/Vision Benefits (UnitedHealthcare), Vacation/Sick/Holiday Pay, Bonus eligibility Ideal Candidates will have the following experience: • A graduate of a four year accredited college or university program within the discipline of Engineering, Architecture, Construction Management, Building Construction, or Building Science. A combination of equivalent work experience and training in the field may be qualifying., • A minimum 5 to 10 years' experience as a Project Manager, Superintendent, QC Manager, Project Engineer, or Construction Manager with at least two years of continuous experience as a QC Manager required., • A current USACE CQM for Contractors Certificate (or equivalent) is required., • Specialty inspection training and licenses/certs highly desired., • LEED AP, AP+ or Green Associate (GA) Certificate preferred., • Level 1 EM 385-1-1, CRP, First Aid, OSHA 30-hour certifications required. Training can be provided., • Computer literacy (Microsoft Office, Outlook, Internet, etc.) required., • Specific software literacy (Viewpoint/Vista) preferred. COMPANY PROFILE: RQC, LLC is a full service contracting and design firm that specializes in Design/Build projects for both public and private clients, with a primary focus on the Department of Defense. Our mission is "to provide our customers the best built environment while being the first choice of all stakeholders." We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, creed, gender (including gender identity and gender expression), religion (all aspects of religious beliefs, observance or practice, including religious dress or grooming practices) marital status, registered domestic partner status, age, national origin or ancestry, physical or mental disability, medical condition (including cancer or a record or history of cancer, and genetic characteristics), sex (including pregnancy, childbirth, breastfeeding or related medical condition), genetic information, sexual orientation, veteran status, or any other basis or status protected by federal, state, or local law or ordinance or regulation. All candidates considered for hire must provide evidence of identity and U.S. work authorization at the time of hire. Additionally, all candidates must successfully pass a drug screening and commercial criminal background check, including a stricter Department of Defense background check, for access to job site at military base (if applicable for position being hired for). Job Posted by ApplicantPro

Job Description Ardurra is seeking a water and wastewater Master Planner & Hydraulic Modeler Project Engineer to join our growing California Water Practice. CA PE license required or ability to obtain within 12 months of hire Primary Function: The ideal candidate will have a well-rounded background or proven skills in master planning and hydraulic analyses and will support senior-level staff on water and wastewater planning projects. The candidate will also have strong communication and interpersonal skills. Primary Duties: • Plan, schedule, and track milestones, tasks, and activities, • Develop and run hydraulic models and document results in reports or technical memoranda., • Perform research and analytical tasks related for water, recycled water, and wastewater masterplans, urban water management plans, asset management plans, water supply assessments, risk assessments, flow monitoring reports, etc., • Attend meetings to discuss project progress and results., • Actively managing assigned projects, • Assist with business development activities., • Bachelor’s Degree in Civil, Environmental, or related Engineering from an ABET accredited university or equivalent. Equivalent modeling and master planning project experience with another STEM degree will be considered., • State of California PE license is required or ability to obtain within 12 months of hire date., • 3 to10 years of related experience in water and wastewater master planning tasks related to but not limited to: sewer I/I analysis, flow factor development and projections, business risk calculations, alternative analysis, cost estimations, alternatives scenario analysis, fire flow analysis etc., • 3+ years of experience with hydraulic modeling tools such as Autodesk modeling products like InfoWaterPro, InfoSWMM, InfoSewer, Aquanuity or Bentley products like WaterGEMS, WaterCAD, and SewerCAD or other equivalent software. Experience with other modeling tools will be considered., • 3+ years of experience with ArcGIS Pro and integration with Innovyze / Autodesk software., • Excellent technical writing skills for use in development of master plans, studies, engineering reports, and related technical documents., • Strong organizational, analytical, and problem-solving skills, • Highly self-motivated, able to anticipate and initiate subsequent project tasks, working independently or with minimal instruction., • Able to work efficiently within a predetermined project budget and schedule., • A writing sample of or link to previous work is encouraged., • Experience with data analysis software like R, Tableau, Power BI, etc. and scripting languages like SQL, Python, etc. is desirable but not required. $90,000 to120,000 (DOE) Why Ardurra? While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-LC

Position Overview: The Manufacturing Engineer II plans and designs manufacturing processes for a production facility. Maximizes efficiency by analyzing layout of equipment, workflow, assembly methods, and work force utilization. Being a Manufacturing Engineer II determines the parts, equipment, and tools needed to achieve manufacturing goals according to product specifications. Responsibilities: • Evaluate current catheter manufacturing practices and identify those needing improvement., • Lead operations to increase production capacity and implement new efficient processes., • Analyze and design sequence of operations and workflow to improve efficiencies and establish methods for maximum utilization of production facilities and personnel., • Use Lean Manufacturing Methodology, including Value Stream Mapping and Kaizen events., • Use Six Sigma Methodology (DMAIC or DMADV) and tools including Minitab, FMEA, Fishbone, Process Mapping, etc., • Responsible for manufacturing process development, implementation, and continuous improvement to enhance yield, reduce cost and improve productivity., • Represent Process Engineering in assigned R&D and Project Team meetings for technology transfers and provide technical expertise and support in analytical method development, validation and process scale, and current production capabilities in manufacturing., • Performs or manages process validations (IQ, OQ, PQ)., • Troubleshoot production line issues related to yield, quality, and throughput., • Leads scaling up processes from development to full scale manufacturing., • Supports evaluation of NCR, CAPA, SCAR, Failure investigation and Deviation requests arising from Contract Manufacturers/Suppliers., • Creates/Updates manufacturing instructions, routings, bills of materials and SOPs. Qualifications: Education: • Engineering degree desired or equivalent experience in related job field. Required Experience: • 2+ yrs Biomedical product or medical device development experience., • Working knowledge of mechanical design principles and FDA regulated medical device design controls a plus., • Proficient in CAD software, preferably SolidWorks., • Familiarity with statistical analysis of raw data is required, proficiency in Minitab is preferred., • Hands-on experience managing suppliers and/or contract manufacturers a plus., • Familiarity with design control according to 21 CFR 820 or ISO 13485, engineering change orders (ECO), Corrective Actions and Preventive Actions (CAPA) preferred. Knowledge, Skills, and Abilities: • Knowledge of ASME Y14.5 GD&T., • Excellent interpersonal, communication, and documentation skills are required., • Takes initiative and acts quickly to drive solutions., • Strong interpersonal, organizational and communication skills., • A flexible team player, focusing on shared goals with a positive results‐oriented attitude.

Job Description Company Introduction: Airspace is a tech-enabled freight forwarder that's redefining how the world's most critical packages are delivered. Headquartered in Carlsbad, California, Airspace has employees who are based around the world. Our European headquarters is in Amsterdam, The Netherlands. As a recognized leader in AI and machine learning, our team leverages data and patented technology to coordinate logistics across a global network of drivers and airlines. Our goal is to deliver those packages that are truly mission-critical in a way that is faster, more transparent, more secure, and more accountable than ever before. The items we deliver range from organs for transplant, to parts for critical machinery including grounded aircraft and highly sensitive components such as semiconductors. Airspace has been rated one of America's best Startup Employers, listed as one of CNBC's Disruptor 50 companies, and featured as an Innovation and Disruption leader by CBS News. Airspace has the support of leading investors such as Telstra Ventures, HarbourVest Partners, Defy Partners, DBL Partners, and Scale Ventures. To date the company has raised more than $140m. The company is growing rapidly and serving more places around the world than ever before. We are looking for passionate, motivated individuals who want to make an IMPACT every day to help us execute on our mission of reshaping the world of time-critical logistics. About the Role:The core services team at Airspace takes on some of the most important problems in our growing company. Our Golang-based microservices utilize machine learning and optimization techniques to enable key business capabilities such as route planning, risk management, and vehicle dispatching. Airspace's R&D team is looking for a naturally curious and adept developer to help build these critical, performant systems. The ideal candidate is proficient in Go, but will be capable of making meaningful contributions to any part of our platform. What You'll Do: • Design, build, and maintain software for our Golang-based microservices, • Work in an iterative, data-driven environment that favors experimentation and feedback, • Productionize and apply machine learning models to solve unstructured business problems, • Research, implement, and integrate domain-relevant algorithms, • Collaborate with a team of smart, friendly engineers to develop impactful solutions unique to logisticsWhat We're Looking For:, • 7+ years of experience building production-grade backend systems with Go, Python, Java, C, C++, Ruby or comparable language. Go is heavily preferred., • A strong understanding of CS fundamentals, including data structures, algorithms, concurrency, and time vs space tradeoff, • Experience building cloud-native microservices and distributed systems, • Excellent teamwork and interpersonal skills, with a strong sense of ownership, • Familiarity with machine learning and/or mathematical optimization is a plus, • Salary Range: $140k ~ $180k, • High-quality health, dental, and vision plan options, • Unlimited PTO, • We are One Team. We believe we all accomplish more when we are working together., • We make an Impact. We are determined to have a positive influence on our environment, our customers, our industry, and our world., • We are Passionate. We care deeply about our mission and are not afraid to raise the bar., • We are Transparent. We pride ourselves on having open, honest, and sincere communication with our team and customers. With offices in the United States in Carlsbad, CA and in Europe in Amsterdam, Frankfurt, Stockholm, and London, we are rapidly scaling into new markets and industries while continuing to innovate and maximize value for our customers. Backed by leading investors including Telstra, HarbourVest, Prologis, Qualcomm, Defy, and others, Airspace has raised $140M to date. Join our team of 300+ technologists, futurists, and industry veterans as we work as One Team to revolutionize time-critical logistics. Airspace is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. Additionally, Airspace participates in the E-Verify program for all locations. For this role the acquisition of recruitment agencies is not appreciated, thank you for your understanding.

Job DescriptionSummary Our client is a highly sought-after, stable, and prestigiousGeneral Contractor home-based in North County San Diego, with projects all throughout Southern California. They are currently in immediate need of a Commercial Construction Project Coordinator, who has worked in the construction space in the past. Please take the necessary time to review this job description. If you feel that you possess the necessary skills to satisfy the requirements, then simply apply and you will hear back from one of our team members. This individual must be organized,sociable, energetic and motivated with good oral and written communication skills. Duties & Responsibilities • Distribute project bid requests to subcontractors., • Make phone calls to check the status of subcontractor bids during the bid process., • Manage the subcontractor call list and make notes to quantify accurate bid coverage throughout the bidding process., • Organize bid RFIs from subcontractors for project management., • Manage the collection and organization of subcontractor bids., • Follow up with subcontractors via phone and email to receive bids and answer bid related questions., • Assist in managing subcontractor database., • Manage, monitor and process submittals and RFIs., • Resolve discrepancies by collecting and analyzing information., • Take meeting notes, • Gather quotes from subcontractors and material suppliers., • Maintain plan list and project contact lists, • "Slip sheet plan revisions manually and electronically, • File and document control, • Send, track and receive subcontracts and subcontractor insurance, • Manage electronic project documents to share-file site, • Work with government agencies to pull permits, • Work with subcontractors to assemble billings and obtain the correct paper work, • Prepare close out document packages, • Provide assistance and support for Project Management, • Notary, • Manage Global Directory for Procore, • AIA Subcontract Template Updates, • AIA Owner Template Updates, • Reference to Governing State Retention & Lien Period Limits, • Updating Global Project List, • Project Management:, • Project Directory Maintenance (Assigning Notification and Distr. Groups), • Flag Flow Down Requirements from Owner Contract to Subcontracts, • RFI Posting to Procore (After PM Review), • RFI Log follow up w/ Arch. / Engineer, • Create Submittal Log in Procore, • Request subcontractor submittals from subs., • Submittal Posting to Procore (After PM Review), • Submittal Log follow up w/ Arch. / Engineer, • Plan Overlays to Changes in Updated Plans from Architect, • Sub; Vendor Request for Pricing; Follow Up, • Owner Change Orders: Prepare, Issue, & CollecT, • Prepare drafts of Owner Billings, • Owner Billings: Issue and Track, • Cost Plus Audit Preparation, • Fund Control, • Cost Coding Material Supplier Invoices, • Cost Coding DCI Labor Timecards, • Final Draft Owner Meeting Minutes, • Technical Skills:, • Microsoft Office (Word, Outlook, Excel), pdf software (Bluebeam or Adobe), Procore, Sage, math skills, time management, work under pressure and meet deadlines, work independently and as part of a team.Qualifications & Requirements, • 2-4 years of construction administration experience/knowledge is preferred., • High school graduateCompensation & Schedule, • This position is hourly., • Office hours are flexible between 7:00am - 7:30am to 5:00pm., • Compensation is based on a 40hr per week schedule and $17-$22/hour depending on experience.Employment Type: Full time Location: San Marcos, CA

Job Description Transportation Engineer I - II Job Description Growing civil engineering firm seeking a Transportation Engineer I or II to service sub-contracts with major engineering companies on projects for the California High Speed Rail Authority, Caltrans and LA Metro. Flexible work environment with opportunity to work remotely offered in most situations. Either full-time or part-time schedules can be accommodated. Essential Duties and Responsibilities of a successful candidate include but are not limited to: • Design portions of large transportation projects to the appropriate standards using relevant office software and modeling tools., • Complete calculations using engineering formulas and skills to solve problems., • Prepare specifications for materials, installation, inspection and payment of items specific to a project., • Work to complete design details and plan sets., • Assist in the preparation of engineering and construction cost estimates., • Prepare project reports and technical memos, • Perform QA/QC reviews and audits. Skills/Requirements of a successful candidate include but are not limited to: • A bachelors or master's degree in civil engineering or closely related field., • EIT required, Civil PE preferred, • At least three years of experience in transportation civil engineering related to roadway/railway design, • Experience in traffic engineering and ITS is a plus, • Microstation proficiency is essential, • AutoCAD Civil 3D proficiency is a plus, • DOT experience preferred, • Caltrans or CHSR experience is a plus, • Ability to work under tight deadlines, • Good communication and technical writing skills, • Ability to work both independently and as part of a diverse team, • Good at managing client relationshipsCompany DescriptionTurrell Engineering LLC is a small (SBE and DVBE certified) Civil Engineering Services firm based in San Diego who, for over 20 years, has been providing Construction Management, Project Management and Engineering Services to large and small engineering firms and contractors as well as public agencies throughout California and beyond. TE provides comprehensive construction management and engineering services in the following areas: Water/Wastewater, Tanks, Pipelines, Tunnels and Shafts, Dams and Hydro, Highways, High Speed Rail, Jacking and Boring, Underground Utilities, Commercial Buildings, Demolition, Pre-construction Activities, Project Management, Resident Engineering, Field Inspection Services, Change Order and Claims Management, Cost Estimating and Scheduling, Quality Assurance and Quality Control, Constructability Reviews, Project Start-up and Close-out, Document Control, Labor Compliance, Public Outreach, Proposal Management.Turrell Engineering LLC is a small (SBE and DVBE certified) Civil Engineering Services firm based in San Diego who, for over 20 years, has been providing Construction Management, Project Management and Engineering Services to large and small engineering firms and contractors as well as public agencies throughout California and beyond. TE provides comprehensive construction management and engineering services in the following areas: Water/Wastewater, Tanks, Pipelines, Tunnels and Shafts, Dams and Hydro, Highways, High Speed Rail, Jacking and Boring, Underground Utilities, Commercial Buildings, Demolition, Pre-construction Activities, Project Management, Resident Engineering, Field Inspection Services, Change Order and Claims Management, Cost Estimating and Scheduling, Quality Assurance and Quality Control, Constructability Reviews, Project Start-up and Close-out, Document Control, Labor Compliance, Public Outreach, Proposal Management.

Job Description Company Overview Hanwha Vision America, an affiliate of the Fortune Global 500 Hanwha Group, is a global leader in advanced network video surveillance and access control solutions. We deliver end-to-end security products—including access control systems, IP cameras, storage, and video management software—serving critical sectors such as retail, transportation, education, healthcare, finance, and critical infrastructure. We are seeking a Senior Firmware Engineer to join our team, dedicated to pioneering the next generation of building access control solutions. You will be instrumental in developing high-performance, secure, and reliable embedded firmware across our entire product line. Key Responsibilities You will act as a key technical leader, driving the strategic design and full-lifecycle delivery of the end-to-end solution, focusing on high-quality, secure firmware Firmware Architecture & Security • Architect High-Performance Systems: Design and lead the implementation of scalable, real-time embedded solutions that maximize efficiency, reliability, and speed across multi-layered systems., • Secure Firmware Development: Design, implement, and maintain the secure software foundation for our products, ensuring robust integration with SDKs, storage systems, and cloud services., • Cryptography Integration & Optimization: Expertly integrate, optimize, and secure cryptographic libraries (e.g., OpenSSL, mbedTLS) for encryption, authentication, secure key management, and digital signatures on resource-constrained platforms., • Vulnerability Analysis & Mitigation: Proactively analyze firmware and system architecture for potential security vulnerabilities and design robust, scalable countermeasures, driving a security-first development mindset. Cross-Platform Development & Toolchain Leadership • Cross-Platform Compilation: Architect and manage robust cross-compilation toolchains for diverse target architectures., • End-to-End Product Engineering: Drive the development, integration, and deployment of firmware across multiple hardware platforms, ensuring high quality and performance from prototype to mass production., • Testing, Automation & CI/CD: Develop and maintain comprehensive unit, integration, and performance tests. Significantly contribute to the build and production test infrastructure, owning key components of the CI/CD pipeline., • Code Quality & Architectural Refactoring: Conduct rigorous code reviews, champion best practices for maintainability, and proactively lead the refactoring of existing codebase components to ensure future feature readiness and technological longevity. Required Qualifications • Education: Bachelor's or Master's degree in Computer Science, Computer Engineering, or a closely related technical field., • Experience: A minimum of 8+ years of progressive professional experience as a Firmware Engineer, Embedded Software Engineer, or in a similar leadership role., • Proficiency: Expert-level proficiency in C and C++ is mandatory. Category Key Technologies & Areas of Expertise Networking Deep expertise in protocols: TCP/FTP/UDP/RTP/RTSP/RTCP/HTTPS/TLS, MQTT. Embedded Stack Linux, RTOS, Yocto, Embedded C++, Device Drivers, I2C, SPI, UART, Flash/Memory management. Toolchains & Infra Cross-Platform Compilation (Toolchain), Git/GitLab, Docker, Linux Shell Scripting, CMake/Make, Debuggers (GDB). Host Environments Development and build experience across Windows, Linux, and macOS environments is required for managing cross-platform builds. Achievements & Leadership • Deployment Scale: Proven track record of developing and successfully deploying firmware to mass-market devices (100k+units)., • Automation: Direct experience building and optimizing a sophisticated firmware CI/CD pipeline for continuous integration and automated testing., • Strategic Impact: Demonstrated ability to lead global engineering initiatives, drive technical consensus, and translate business vision into concrete, long-term technology roadmaps., • Troubleshooting Mastery: Proven ability to troubleshoot and diagnose complex, intermittent issues end-to-end across hardware, firmware, and network layers.

Job Description Mechanical Quality Engineer supporting new product development. Develop, improve, and implement quality methods and systems, working on cross functional teams in a regulated environment to ensure the safety, reliability and efficacy of products and processes. Essential Duties and Responsibilities • Support New Product Development as primary QE for mechanical implants and instruments. Manage multiple concurrent major and minor projects., • Support Design Controls to ensure efficient, effective, and compliant new product launches., • Support the qualification of legal manufacturers (OEM) for distributed products., • Lead Material Review Board (MRB), own Non-Conformance (NC) development and resolution, lead reworks and deviations, participate in Supplier Review Board (SRB)., • Develop inspection plans and custom gauging based upon required measurement and tolerances., • Support Change Order review for drawings, considering Design for Manufacturing (DFM) and Design for Inspection (DFI)., • Act as liaison between supplier and company for quality related concerns or issues. Technical interface with contract manufacturers., • Support cleaning and sterilization validations of implantable devices; basic understanding of tests such as bioburden, BET, and dose audit testing., • Support validation (IQ, OQ, and PQ) development and execution internally and at suppliers., • Apply statistical techniques to analyze manufacturing processes and recommend appropriate process controls., • Support Risk Management efforts in accordance with ISO 14971; conduct preliminary risk assessments for projects. Support Failure Mode and Effects Analysis (FMEA) for designs and processes., • Support Field Retrieval Assessment (FRA) and Health Hazard Evaluation (HHE) as needed., • Support MDSAP, FDA, ISO, and other regulatory audits., • Apply external standards and guidance documents to project / product specific application., • Own Supplier Corrective Actions (SCARs) and Corrective and Preventive Actions (CAPAs). The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Good understanding of the FDA Quality System Regulations (21 CFR Part 820), ISO 13485, MDSAP, and ISO 19227., • Direct experience with implantable devices, instrumentation, and disposables in a regulated environment., • Knowledge of mechanical inspection methods and equipment., • Knowledge of SPC, DOE, probability, and statistics., • Ability to read, analyze, and interpret blueprints, including GD&T., • Ability to solve complex problems to root cause and prevent re-occurrence (CAPA)., • Ability to process data, interpret data trends, and make basic recommendations based on findings., • Ability to troubleshoot and manage priorities across multiple projects based upon ATEC business priorities., • Strong technical writing skills, including ability to write protocols, reports, and procedures., • Ability to effectively interact with all levels of the organization., • Shows desire and ability to take on small leadership roles within projects, effective communication and collaboration with team members., • Ability to develop and maintain strong working relationships with internal and external customers and suppliers., • Excellent verbal and written communication, ability to resolve minor conflicts, collaborative teamwork., • Demonstrates tenacity in overcoming obstacles; proactive in taking initiative., • Knowledge of SolidWorks or other CAD software preferred., • Manufacturing Engineering experience preferred, including knowledge of metal and plastic part production and processing. Process knowledge including milling, turning, EDM, 3D printing, and secondary processing., • Detail oriented., • Good decision-making skills and judgment., • Ability to develop plans and strategies and execute to completion., • Must be able to travel up to 5% of the time. Education and Experience • Minimum Bachelor’s degree (BS) from a four-year college or university, preferably in Mechanical, Industrial, Biomedical, or Manufacturing Engineering., • 2+ years related experience and/ or training; or equivalent combination of education and experience. For roles based in the United States that require access to hospital facilities, must be eligible for and maintain credentials at all required hospitals, including meeting any applicable physical requirements or vaccination requirements (including the COVID-19 vaccine, as applicable). ATEC is committed to providing equal employment opportunities to its employees and applicants without regard to race, color, religion, national origin, age, sex, sexual orientation, gender identity, gender expression, or any other protected status in accordance with all applicable federal, state or local laws. Further, ATEC will make reasonable accommodations that are necessary to comply with disability discrimination laws. Salary Range Alphatec Spine, Inc. complies with state and federal wage and hour laws and compensation depends upon candidate’s qualifications, education, skill set, years of experience, and internal equity. $91,000 to $108,000 Full-Time Annual Salary

Job Description At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. We are seeking an experienced Lead Automation Engineer to perform full cycle project delivery for industrial process control systems. All roles include client facing collaboration. Responsibilities include defining system architecture, creating design specifications, programming PLC/DCS/SCADA applications, tuning loops, and supporting startup, commissioning, and troubleshooting. This is a fantastic opportunity to lead projects from concept through commissioning alongside other excellent engineers. You Will: • Provide control systems design, development, and onsite support for systems of varying complexity, • Interact with customers to gain an understanding of the business environment. Define scope, plans, and deliverables for assigned work, • Modify program/system logic involving multiple systems and subsystems, • Develop proficiency in several programming languages and control device networks for PLCs, PCs, DCS, • Work successfully in a team environment; focused strongly on customer service and continuous improvement, • Enjoy going to Travel to local sites two to four days per week, • Appreciate the documentation and planning aspects of engineering in a regulated environment, • Serve as an ambassador who embodies our Core Values, prioritizing the success of E Tech Group, our clients, and the professional development of our associates. You Have: • Bachelor's Degree in Engineering, • 5 years of experience, • Consulting/billable environment experience, • Proficiency in troubleshooting control systems and an understanding of process control, • Industry experience in: Biotech, water/wastewater, chemical, Food & Beverage, • Applied knowledge of, • TCP/IP, computer networks, and control system networks (Ethernet, ControlNet, DeviceNet, etc.), • Control panel and I/O electrical design, operation, troubleshooting, • Motor / valve / skid interfaces and control, • Product expertise:, • Object oriented / S88 / UDT architecting, • PLC (Rockwell, Modicon, Siemens) or DCS Platforms (Rockwell PlantPAx, Emerson DeltaV), • Rockwell experience with products such as: ControlLogix, CompactLogix, PlantPAx, Factory Talk Software Suite (FT View, FT Historian, FT AssetCentre), Studio 5000, PLC5, SLC500, RSView, PanelView Plus, etc., • Ignition experience: Perspective, alarms & notification, reporting, SQL bridge, and tag historian modules, • Other SCADA and HMI package experience (Proficy, Wonderware, TIA Portal), • Experience implementing detailed control system electrical design packages, • Excellent written and verbal communication skills, • Pluses but not strictly required:, • Understanding of Biopharmaceutical processes, S88 Batch, GMP, and validation, • Instrumentation experience, • DeltaV, • AVEVA PI Historian experience, • A DNA comprised of collaboration and teamwork Benefits & Perks: • 401k + match + prompt enrollment. E Tech Group employees are 100% vested upon entry., • Prompt enrollment into Medical, Dental, and Vision benefits., • Generous paid time off that includes paid vacation, paid holidays, paid family leave and sick time off. E Tech Group is an Equal Opportunity Employer. Applicants are considered for employment without regard to race, color, religion, sex, age, disability, military status, genetic information, gender identity, sexual orientation, citizenship status, or any other basis prohibited by law. E Tech Group will provide reasonable accommodations to qualified individuals with disabilities and for religious beliefs. E Tech Group is an Affirmative Action Employer of individuals with disabilities and protected veterans. #LI-HY1

Job DescriptionSummary Our North County San Diego-based client is a highly sought after commercial general contracting company with exponential growth and exciting opportunities. They are seeking a Project Engineer (PE) or Jr. Project Manager to assist with current projects on hand, as well as future ones. You must be an accountable project engineer who will be responsible for all engineering and technical disciplines that projects involve. You will schedule, plan, forecast, resource and manage all the technical activities aiming at assuring project accuracy and quality from conception to completion. Duties and Responsibilities • Prepare, schedule, coordinate and monitor the assigned engineering projects, • Monitor compliance with applicable codes, practices, QA/QC policies, performance standards and specifications, • Interact daily with the clients to interpret their needs and requirements and represent them in the field, • Perform overall quality control of the work (budget, schedule, plans, personnel’s performance) and report regularly on project status, • Assign responsibilities and mentor project team, • Cooperate and communicate effectively with the project manager and other project participants to provide assistance and technical support, • Review engineering deliverables and initiate appropriate corrective actionsQualifications & Requirements, • BS Degree in Construction Management, Construction Engineering or equivalent required, • Proven working experience as a Project Engineer, • Strong computer skills and proficiency in Microsoft Office, including Microsoft Project, • Excellent knowledge of design and visualizations software such as AutoCAD, • Familiarity with rules, regulations, best practices and performance standards, • Ability to work with multiple discipline projects, • Project management and supervision skills, • Decision-making ability and leadership skills, • Time management and organization skills, • Experience with BIM or Revit and LEED Accreditation a plus, • Must be able to work in a fast pace environment while maintaining teamwork and positive attitude, • 3-4 years of experience in a similar role required, • Construction: 2-4 years

DIRECT CANDIDATES ONLY, IF INTERESTED APPLY THROUGH JOB POST. NO DIRECT MESSAGES. RECRUITERS: DO NOT CONTACT. Job Summary Perform and support a variety of development and engineering activities, which mainly focus on device's design, prototyping, fabrication, product requirements and verification testing. Will work directly with other R&D technicians and R&D engineers to complete various assignments. Assists engineers in developing methods and procedures to control or improve product design processes. Responsibilities: • Builds prototypes devices in accordance with engineering instructions, or drawings and specifications., • Assists with development of manufacturing processes and corresponding design transfer to production., • Supports R&D catheter assembly, manufacturing, and prototyping., • Performs assembly and failure analysis using laboratory microscopes., • Participate in the design and development of new concepts., • Interact with Engineers to understand product requirements., • Sets up and operates manufacturing and/or test equipment. Records data with limited supervision., • Provides technical support to engineers on a variety of technical tasks, • Gathers, maintains, formats, compiles, and manipulates technical data, such as laboratory or material test results and engineering design changes., • Plans and performs tests and evaluations of systems equipment or components., • Conduct tests of completed units or components under operational conditions to investigate designs or to obtain data for development and standardization., • Partners with engineering staff on project needs (e.g., supports test method development), • Documents all analysis and testing completed for R&D and new product development projects working closely with the cognizant engineer. Records and analyzes test procedures and results, numerical and graphical data., • Assist engineers with product and process design, development, and optimization. Partners with engineers to design and assemble functional prototypes and provide feedback on assembly process and design., • Assist with the development of new and existing test protocols., • Independently identifies processes improvements, generates ideas and qualifies through builds and testing., • Lead and mentor other technicians to reach departmental and company objectives. Qualifications: Education: • High School or equivalent with five or more years’ experience as R&D technician (or relevant experience), • Required Experience:, • 5+ years development experience in medical device/clinical environment., • Hands-on experience in medical device manufacturing /production environment or prototyping experience., • Ability to quickly interpret and comprehend engineering drawings and specifications., • Working knowledge of catheters and microscopes. Working knowledge of word processing and spreadsheet software., • Use of measurement devices., • Use of required safety equipment when performing lab work., • Knowledge, Skills, and Abilities:, • The candidate should have team building skills, organizational skills, personal skills, and a strong follow-through “can do” attitude., • Monitors own work to ensure quality., • Must also verbally communicate work to engineers and other staff in a clearly understood, organized and logical manner., • Familiar with Good Manufacturing Practices (GMP), Good Documentation Practices (GDP) and laboratory practices.

Company Description Dunn Savoie Inc is a structural engineering company based out of 908 S Cleveland St, Oceanside, California. We are a small firm in business since 1998 with mostly repeat clients and referrals from them. We are 3 blocks from the beach, and have a relaxed natural air environment. Role Description This is a full-time on-site role for a Structural Engineer for Buildings and Retaining at Dunn Savoie Inc located in Oceanside, CA (in office preferred, 2 days a week minimum if hybrid desired). The role involves designing and analyzing structural components for buildings and retaining walls, collaborating with project teams, and ensuring structural integrity and safety compliance. Must have experience with existing wood framed construction field work for repairs, retrofits and remodels. We work for Architects, Contractors, Homeowners & HOA property managers. Qualifications • Communication and Analytical Skills, • Project Management skills-with client, job consultants and our staff., • experience with on site determination of existing framing for remodels, repairs and retrofits., • Structural/Architectural & Retaining Engineering experience desired., • Experience with structural analysis software-Enercalc is our main program and we also have Risa 3D, • Strong understanding of building codes and regulations, • Bachelor's degree in Civil or Structural Engineering, • Professional Engineer (PE) license is a plus, • California Experience required, • Bonus's are given when DSI profits allow...twice a year the last two., • Drafting experience not required but familiarity with AutoCadd is a plus.

DIRECT CANDIDATES ONLY, IF INTERESTED APPLY THROUGH JOB POST. NO DIRECT MESSAGES. RECRUITERS: DO NOT CONTACT. Responsibilities: Overview: The R&D Engineer will use engineering knowledge to design, develop, verify and validate product designs in support of company’s strategic plan. Contribute as part of a cross‐functional team in product design and development, process development and optimization, and verification & validation testing to support product transfer to manufacturing. Responsibilities: • Prepare documentation to support quality system for design functions (project plans, concept document, FMEA, design input, test results, drawings, etc.), • Prepare technical documentation, including manufacturing instructions, test methods, drawings, BOMs, protocols, and reports to support design control activities., • Perform Verification and Validation (V&V) and may draft protocols/reports for approval., • Work with engineers & QA to create new components, assemblies, or tools., • Conducts testing to verify that the design meets the engineering specifications., • Document engineering work in compliance with the company's quality system., • Identifies hazards and mitigates risk associated with identified hazards in Design and Process FMEA. Assess failure modes and conduct technical risk analysis., • Compiles and analyzes data, identifies causes, draws conclusions, generates reports., • Provide hands‐on, technical execution in the prototyping and development of devices., • Manages processes and ensures that activity goals are achieved., • Training and/or providing work direction to technicians and less experienced engineers., • Support the development of specifications for tooling and fixturing according to company quality standards. Qualifications: Education & Experience: • Engineering degree desired or equivalent experience in related job field., • 2+ yrs Biomedical product or medical device development experience (catheter experience desirable)., • Working knowledge of mechanical design principles and FDA regulated medical device design controls a plus., • Proficient in CAD software, preferably SolidWorks., • Familiarity with statistical analysis of raw data is required, proficiency in Minitab is preferred., • Understanding of IEC60601 requirements/constraints for mechanical system design is preferred., • Experience managing suppliers and/or contract manufacturers a plus., • Hands-on mechanical prototyping, verification, and failure analysis skills., • Familiarity with design control according to 21 CFR 820 or ISO 13485, engineering change orders (ECO), Corrective Actions and Preventive Actions (CAPA) preferred. Skills & Abilities: • Proficient in Risk Management according to ISO 14971., • Knowledge of ASME Y14.5 GD&T., • Excellent interpersonal, communication, and documentation skills are required., • Proven self-starter who runs towards critical issues, ambiguous requirements, or loosely defined challenges with a demonstrated ability to rally teams to achieve business results., • Takes initiative and acts quickly to drive solutions., • Strong interpersonal, organizational and communication skills., • A flexible team player, focusing on shared goals with a positive results‐oriented attitude.

Job Description About The Job We are seeking talented individuals to aid in the design and implementation of electrical systems and strategies as part of a broad engineering and architectural team. You will be a member of our Power Systems group and your responsibilities will include, but not be limited to: • CAD design of electrical systems, • Perform Arc Flash study calculations, • Improve calculation templates for electrical design, • Research and create new “Best Practice” recommendation in an electrical subject of interest related to the electrical construction industry., • Junior or Senior pursuing a Bachelor’s degree in Electrical Engineering or related field., • Proficiency with MS Office (Excel, Word, Access) and familiarity AutoCAD or similar software, • Familiarity with three phase power, the National Electric Code, wireless radio systems, fire and security systems, Fiber or LAN cabling is a plus. We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job DescriptionSummary Our client is a highly sought-after, stable, and prestigious General Contractor home-based in North County San Diego, with projects all throughout Southern California. They are currently in immediate need of a Commercial Construction Project Coordinator, who has worked in the construction space in the past. Please take the necessary time to review this job description. If you feel that you possess the necessary skills to satisfy the requirements, then simply apply and you will hear back from one of our team members. This individual must be organized, sociable, energetic and motivated with good oral and written communication skills.Duties & Responsibilities • Distribute project bid requests to subcontractors., • Make phone calls to check the status of subcontractor bids during the bid process., • Manage the subcontractor call list and make notes to quantify accurate bid coverage throughout the bidding process., • Organize bid RFI’s from subcontractors for project management., • Manage the collection and organization of subcontractor bids., • Follow up with subcontractors via phone and email to receive bids and answer bid related questions., • Assist in managing subcontractor database., • Manage, monitor and process submittals and RFI’s., • Resolve discrepancies by collecting and analyzing information., • Take meeting notes, • Gather quotes from subcontractors and material suppliers., • Maintain plan list and project contact lists, • "Slip sheet” plan revisions manually and electronically, • File and document control, • Send, track and receive subcontracts and subcontractor insurance, • Manage electronic project documents to share-file site, • Work with government agencies to pull permits, • Work with subcontractors to assemble billings and obtain the correct paper work, • Prepare close out document packages, • Provide assistance and support for Project Management, • Notary, • Manage Global Directory for Procore, • AIA Subcontract Template Updates, • AIA Owner Template Updates, • Reference to Governing State Retention Lien Period Limits, • Updating Global Project List, • Project Management:, • Project Directory Maintenance (Assigning Notification and Distr. Groups), • Flag Flow Down Requirements from Owner Contract to Subcontracts, • RFI Posting to Procore (After PM Review), • RFI Log follow up w/ Arch. / Engineer, • Create Submittal Log in Procore, • Request subcontractor submittals from subs., • Submittal Posting to Procore (After PM Review), • Submittal Log follow up w/ Arch. / Engineer, • Plan Overlays to Changes in Updated Plans from Architect, • Sub; Vendor Request for Pricing; Follow Up, • Owner Change Orders: Prepare, Issue, CollecT, • Prepare drafts of Owner Billings, • Owner Billings: Issue and Track, • Cost Plus Audit Preparation, • Fund Control, • Cost Coding Material Supplier Invoices, • Cost Coding DCI Labor Timecards, • Final Draft Owner Meeting Minutes, • Technical Skills:, • Microsoft Office (Word, Outlook, Excel), pdf software (Bluebeam or Adobe), Procore, Sage, math skills, time management, work under pressure and meet deadlines, work independently and as part of a team.Qualifications & Requirements, • 2-4 years of construction administration experience/knowledge is preferred., • High school graduateCompensation & Schedule, • This position is hourly., • Office hours are flexible between 7:00am - 7:30am to 5:00pm., • Compensation is based on a 40hr per week schedule and $17-$22/hour depending on experience.

Job Description Position: Project Engineer, Multifamily Construction Location: Oceanside Salary: $90,000 - $125,000 + bonus + excellent benefits Position Summary As our Project Engineer you will support the Project Management Team with the planning and daily execution in the construction of various types of high density residential and mixed use projects, starting with a brand new luxury multi-family project in North San Diego county. The position will report to the Project Manager and Senior Project Manager. The position's key responsibilities will include, in part, maintaining certain aspects of the project schedule as assigned by the Project Manager, supporting the process of subcontractor requests for information (RFIs) and the supplying of project submittals, subcontractor contract compliance related to the timely supply of information and materials including but not limited to schedule updates, pricing, safety plans and minutes of tailgate meetings, Material Safety Data Sheets (MSDA), material samples and required submittals. This position will also be involved with helping the superintendents out in the field and other team members to ensure the timely and safe completion of projects and delivery of high quality product. Requirements: • Associate or Bachelor's Degree in Construction Management, Engineering or other related field., • A minimum of 2 years of project engineer experience or other construction related trade experience is desirable., • Multi-family construction experience is a huge plus., • Ability to communicate well in English both written and verbally., • Demonstrated proficiency using a personal computer and company communication tools, such as email, Internet, and Microsoft Office products (Word, Excel, Office, Outlook)., • $90,000 - $125,000 salary DOE, • Comprehensive medical, dental and vision, • Employer sponsored short and long term disability, Life and ADD insurance, • 401k with employer matching #danieln

Job Description GeoSoils, Inc. (GSI), a division of NEC Group Inc., is a geotechnical, coastal, and environmental engineering firm founded in 1974, is seeking Licensed Geotechnical Engineers to support our California offices (San Diego County, Riverside County, Orange County, and Los Angeles County). Candidates must have a history of increasing levels of responsibility and a minimum of ten years’ experience in geotechnical engineering. Coastal Engineering experience is desirable. As a GSI Geotechnical Engineer, you will be responsible for technical and business aspects of the company and may provide expert technical input and/or oversight on large, complex projects. Your responsibilities will include: • Providing technical leadership in geotechnical engineering, overseeing project teams, and mentoring junior engineers and geologists., • Manage geotechnical investigations, including developing project schedules; planning staffing; technical analyses; report preparation; financial management and cost control., • Manage junior engineers and geologists in conducting their day-to-day duties., • Conduct complex geotechnical analyses, including foundation design, slope stability, and seismic assessments., • Lead site investigations and providing expert recommendations to inform project designs., • Collaborate closely with multidisciplinary teams, clients, and regulatory agencies., • Ensure quality control and adherence to industry standards on geotechnical projects. What We're Looking For: • Minimum of a Master’s Degree in Geotechnical Engineering, Civil Engineering or similar engineering or sciences related degrees. · Established client relationships with public agencies and/or private entities, with a track record of success in this arena. · Extensive knowledge of codes, principles and practices of engineering. • Proficiency in geotechnical software and analytical tools., • Exceptional problem-solving skills and a proven track record in geotechnical engineering design., • Must have a valid driver’s license and a good driving record, • A leadership role with significant influence on our geotechnical engineering practice., • Room for advancement and growth., • Comprehensive benefit program to meet the diverse needs of our employees., • Benefits include health, dental, vision, and lifer insurance., • Competitive compensation packages and profit distribution practices.

Job Description The Senior Design Engineer will be primarily responsible for the development of new products and/or the enhancement of existing products. Involved in creating concepts and modeling and drafting designs utilizing 3D CAD software. Other responsibilities include drafting of design history file documents, development of test plans to assess designs, and assisting in the development of processes for Manufacturing, Quality Control, Regulatory and Planning. ESSENTIAL DUTIES AND RESPONSIBILITIES • Designs and develops surgical instruments utilizing SolidWorks., • Assists in the development of new products and manufacturing processes and/or serves as a member of a development team., • Assists in the development of working models to be used for design evaluation., • Generates protocols for testing and analyzing new and current products., • Generates design assurance documentation for the project Design History File (DHF)., • Collaborates on the development of inspection methods., • Initiates and executes design changes relative to manufacturability while maintaining critical features for in house manufacturing or vendors., • Serves on cross-functional product development teams responsible for new product development from concept through product launch., • Assists Project Engineers with providing technical input to marketing counterparts on the development of collateral marketing materials, • Assists Project Engineers with providing technical expertise to Marketing and Sales as to intent of design function., • Assists Project Engineers with providing technical expertise to Regulatory Affairs to support FDA 510(k) submissions and/or international registrations., • Creates and processes Change Orders (CO’s) The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Typically requires a Bachelors degree and a minimum of 3 years of experience preferably in spine or implantable orthopedic medical devices. Co-Op experience can be applied., • Experience with 3D CAD software, preferably SolidWorks, • Strong verbal and written communication skills; comfortable presenting to senior management, • Knowledge in the use and interpretation of geometric dimensioning and tolerancing, preferred, • Prior experience in a manufacturing environment, including knowledge of manufacturing methods, predominantly with metals and plastics, preferred., • Candidate must be highly motivated with a strong work ethic and desire to constantly learn and contribute. Salary Range Alphatec Spine, Inc. complies with state and federal wage and hour laws and compensation depends upon candidate’s qualifications, education, skill set, years of experience, and internal equity. $82,000 to $110,000 Full-Time Annual Salary

Job Description Compensation Package • The approximate base salary range is $100,000 - $150,000 (Incumbent’s final compensation is determined on experience, knowledge, abilities, etc.)., • Performance Bonus & Profit-Sharing Bonus., • 401k + Company Match., • Open Vacation Policy., • Paid Holidays., • Paid Parental Leave., • Health, Vision, Dental, Life Insurance, Disability. As a design build engineering firm and general contractor that designs and builds food and beverage processing facilities, Dennis Group’s automation & controls engineers work closely with our process, packaging and building engineers to meet our clients’ expectations in startup, commissioning, and qualifying their food and beverage production facilities. The role requires regular onsite presence to ensure necessary diagnoses, troubleshooting, and operational startup of our client’s production lines, equipment, and facilities. Our automation & controls engineers are frequently facing engineering challenges in applying standard engineering techniques to design, develop, and maintain instrumentation or control systems. Both software and hardware design and troubleshooting skills and abilities is required for this role. Typical responsibilities include, but not limited to: Responsibilities • Handles complex issues and problems and refers more complex issues to higher-level engineer, team lead, or manager, • With general supervision, designs and troubleshoot both software and hardware necessary for control systems utilizing PLCs for integration of manufacturing systems., • Automates manufacturing processes through the use of instrumentation or controls systems., • Design, diagnose, and troubleshoot network infrastructures - Ethernet, DeviceNet, AS-i, Profibus etc., • Develops new PLC applications, interfaces, or embedded controls, • Develops new or modifies existing set-up and commissioning of new facilities or upgrading of existing facilities, • Design, specify, wire, and procure control panel equipment, e.g. safety circuits, I/O, networks, etc., • Design, specify, and procure electrical equipment, e.g. MCCs, panelboards, transformers, etc., • Create design basis document & scope of work, • Develop functional descriptions and analysis documents devices, • Understand size and placement of control/electrical panels, • Specify, procure, configure, and troubleshoot controls hardware and field instrumentation, • Assist with coordinating with other engineer disciplines, • Troubleshoots and resolves malfunctions and makes recommendations that will improve efficiency or quality of operations, • Create commissioning and start-up checklist, • Observe rough-in construction for compliance with plans, specs, and details, • Project primary client technical contact, • Develop bid documentation for Electrical, Automation, and Low Voltage (network, security) vendors, • Documents specifications and operating procedures, • Interface and manage installation contractors during construction, • Researching Automation & Controls materials and best practices, • Supporting talent growth within our organization, • Degree in Electrical Engineering or a related field, • 8-11 years of experience with Allen Bradley/Rockwell, Siemens, GE Fanuc, Honeywell Systems., • 8-11 years of experience in Visual Basic, SQL, MS ACCESS Database programming skills a plus, • 8-11 years of experience with Design and implement process network infrastructure (Ethernet, Device Net, Control Net, ProfiBus, etc.), • 8-11 years of experience in an industrial manufacturing setting, • Database programming skills a plus, • Proficiency with MS Office and AutoCAD Required, • This role is client facing, those successful in this role are professional, self-motivated, and energetic individuals with excellent communication and inter-personal skills., • Prolonged periods sitting at a desk and working on a computer., • Prolonged periods of standing and walking during installation, commissioning and startup. We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Kinovate Life Sciences, Inc. established in 2004 in Oceanside, California. A wholly owned subsidiary of Nitto Denko Corporation (), Kinovate was spun-off from Oceanside, CA based R&D facility Nitto Denko Technical Corp () with a mission to provide the highest quality materials to niche life science markets worldwide. Since its inception, Kinovate has grown to become the market leader in solid support in the oligonucleotide synthesis field. We are bringing the most creative minds in science and technology to develop medical discoveries and breakthroughs. Our customers are well-known in the biotechnology industry. We are in a growth phase within ISO work environment and leading towards a GMP Certification. KLS is seeking extraordinary people to join the team. KLS is proud to be an equal employment opportunity employer. Why Work Here Great place to work. Small subsidiary of large international company headquartered in Japan. Generous discretionary bonuses. Health, dental, vision, life, and disability insurance effective from date of hire. Additional benefits include 401(k), 3 weeks vacation in your first year, 12 paid yearly holidays, 5 paid sick days, tuition reimbursement and more. JOB SUMMARY: Under strategic leadership, sustain the improvement of the Quality Management Systems (QMS) and manage the development of quality assurance & systems staff. Utilize the following industry standards to drive high-quality products: Current Good Manufacturing Practice (cGMP), International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use (ICH), and International Organization for Standardization (ISO). Facilitate employee relations issues including coaching, mentoring, and disciplining including performance evaluation of employees. Provide strong leadership to motivate, guide and inspire employees to meet the organization’s business objectives with production.Lead the implementation phase of MasterControl, ensuring successful implementation, and post-implementation management. ESSENTIAL DUTIES and/or RESPONSIBILITIES: • Partners with leadership to develop the Quality Management System (QMS) and ensure it is compliant with relevant regulations, including ISO 9001, 21 CFR Part 210 and 211, ICH, and other applicable national and international regulatory guidelines.Ensure the QMS always remains in an auditable state., • Leads the transition of QMS programs, such as Document Control, Training, Quality Events (Deviation, CAPA, Change Control), Audits and Supplier Qualification transition into Master Control, and serves as the System Administrator., • Leads post-implementation management of MasterControl, including, but not limited to, system optimization, performing troubleshooting support, managing software updates, and continuously improving system functionality to meet evolving regulatory needs., • Oversees the daily operations of the QMS, ensuring it runs efficiently and in compliance with quality standards. This includes managing critical quality systems processes such as Document Control, Training, Customer questionnaires and tracking and reporting key metrics for Quality Events, including Deviation, CAPA, Change, Control, Audit, and Supplier Management., • Manages the execution of internal and external audits, ensuring the company is always prepared for audits. Ensures compliance to the internal audit program. Lead audit preparations by ensuring that quality management system documentation is up-to-date and readily available for inspections; including external inspections, serving as the primary point of contact for inspectors, and provide the necessary documentation to support the audit process. Manage post-audit responses and tracking of audit action items., • Ensures proper documentation and records management in compliance with relevant requirements, including batch production records, testing records, and compliance documentation. Monitor the retention and archiving of records in compliance with requirements to ensure traceability and access during audits., • Contributes to the continuous improvement initiatives related to the QMS, collaborating with cross-functional teams to optimize quality processes. Analyze quality data and metrics to identify trends, root causes, and areas for process improvement within manufacturing and quality control activities., • Develops standard operations and other quality documents related to QMS and ensure all documents meet regulatory requirements and internal standards., • Supervises and develop a team of Quality Systems specialists, providing guidance, training, and support to ensure compliance with regulatory standards and best practices., • Mentors and develop a team of Quality Systems specialists, fostering an environment of accountability and growth. Ensure cross-functional collaboration and provide effective leadership managing the QMS processes and ensures effective employee relations., • Directs training initiatives to ensure that team members are adequately prepared to handle QMS functions and sustain a flexible workforce., • Fosters a culture of continuous improvement, supporting staff development and efficiency improvements within the quality systems team., • Conducts performance evaluations of direct reports.Institutes timely corrective actions and interfaces with Leadership and HR in developing disciplinary actions up to and including terminations., • Administers time-keeping functions to track absenteeism; approves timecards on a bi-weekly basis., • Other duties as assigned. SUPERVISORY RESPONSIBILITES: • Quality Systems Specialist, • Sr Quality Systems Specialist MINIMUM EDUCATION and/or EXPERIENCE: • Bachelor’s degree in a scientific discipline; and five (5) years’ directly related experience in a Good Practice (GXP) or ISO manufacturing-controlled environment or equivalent combination of education and experience., • Experience with internal and external audits and processes, including corrective action implementation., • Experience in transitioning from paper based to electronic QMS. KNOWLEDGE, SKILLS and/or ABILITIES: • Working knowledge of pharmaceutical industry concepts, as well as analytical methods and writing skills, including documenting manufacturing processes, a plus. Familiarity in Lean or Six Sigma, a plus., • Strong Knowledge of quality management principles and practices, including ISO and cGMP standards., • Proficient in the use of quality management software with experience in implementing or managing MasterControl being highly desirable., • Experience conducting internal and/or external audits., • Prior supervisory experience, preferred., • Knowledgeable of change control, validation/qualification, and method development and tech transfer., • Strong knowledge of formal root cause analysis and risk assessment tools. Ability to lead or facilitate investigations and/or risk assessments., • Strong application of critical thinking skills along with problem solving and creative skills to identify manufacturing issues for continuous improvement., • Strong multi-tasking skills, flexibility in responding to rapidly changing, dynamic processes and demands/pressures in a fast-paced environment., • Strong ability to verbally communicate across functional organizational groups, provide high-level customer service through effective interpersonal skills and conflict resolution, including communicating with equipment suppliers to obtain input on equipment modification and improvement., • Microsoft Office Suite software applications such as Excel, Word, Power Point, and other enterprise software applications such as Net Suite, LIMS, and Familiarity with statistical analysis tools., • Strong language skills with the ability to read, analyze and interpret general business periodicals, professional journals, technical procedures, or government regulations., • Write clear processes, manuals and reports for management review and present technical information in understandable terms and respond to questions from groups of customers, employees and/or public., • Work independently as well as in a small and/or large group and foster cooperation in a team environment using interpersonal skills to document working knowledge., • Work in a detail-oriented environment with strong follow-up, follow-through, and organizational skills. CERTIFICATES and/or LICENSES: • American Society for Quality Certified, a plus., • Certified Quality Engineer, a plus., • Certified Quality Auditor, preferred. PHYSICAL DEMANDS and/or WORK ENVIRONMENT: (Typical physical demands and the work environment characteristics an employee must meet and encounter while performing the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.) • Works in a typical office environment with prolonged periods in front a computer entering or researching data., • Regularly required to sit; use hands to finger, handle or feel and talk or hear., • Availability and willingness to travel if required for audits, inspection, vendor management or if requested to visit or attend a business transaction as legal agent of the company., • Must be able to work extended hours per the demands of the business.

DIRECT CANDIDATES ONLY, IF INTERESTED APPLY THROUGH JOB POST. NO DIRECT MESSAGES. RECRUITERS: DO NOT CONTACT. Job Summary The Engineer will be a key contributor to the design and development of a therapeutic medical device, from concept to early human use to commercialization. The Engineering Lead will work closely with the team to drive all aspects of the development process including conceptualizing, prototyping, analysis (physical and simulation), researching manufacturing techniques, go-to-market implementation, and manufacturing support. The ideal candidate will possess some knowledge of balloon catheters (i.e., PTA, PTCA). Responsibilities: • Utilize research and experience to develop new product and processes to increase performance., • Manage multiple projects simultaneously, on time, well documented and within budget to meet business objectives., • Collaborate with external suppliers for component and process design and identify outsourcing opportunities., • Provide technical leadership and maintain the engineering staff’s knowledge on technology and engineering areas associated with instrument and mechanism design and manufacturing processes., • Understand the technology and key product features that ensure clinical and commercial success, • Manage research and development activities from Concept Phase through Commercialization, • Make data driven decisions using appropriate analytical methodologies, • Prepare for and conduct various design reviews in accordance with product development, • Demonstrate deep insight regarding design intent and uses insight to drive product requirements and specifications. Develop processes necessary to fabricate devices. Develop and implement test methods for assessing the quality of in-process and finished products., • Develop, execute, and analyze design verification and validation studies, culminating in a design history file., • Prepare documentation to support quality system for design functions (project plans, concept document, FMEA, design input, test results, drawings, etc.), • Provide technical leadership along with technical subject matter expertise to product development team., • Conduct preclinical build operations as necessary., • Initiate, define, perform and execute verification and validation activities., • Prepare technical documentation, including manufacturing instructions, test methods, drawings, BOMs, protocols, and reports to support design control activities., • Perform risk analysis activities and develop product testing plans and protocols; set up and run product testing and protocols in accordance with project plans, • Research and recommend vendor and material choices for product, • Identify hazards and mitigates risk associated with identified hazards in Design and Process FMEA. Assess failure modes and conduct technical risk analysis., • Comply and analyzes data, identifies causes, draws conclusions, generates reports., • Create and managing a schedule of technical deliverables in coordination with a project manager., • Translate highly technical results into easily understood recommendations that will influence cross-functional and senior stakeholders., • Identify hazards and mitigates risk associated with identified hazards in Design and Process FMEA. Assess failure modes and conduct technical risk analysis., • Comply and analyzes data, identifies causes, draws conclusions, generates reports., • Create and managing a schedule of technical deliverables in coordination with a project manager., • Translate highly technical results into easily understood recommendations that will influence cross-functional and senior stakeholders. Qualifications: Education: • MS/PhD degree in Materials Science, or Mechanical Engineering w/emphasis on materials engineering preferred. BS in one of those fields will be considered but will be weighed heavily on work experience., • Polymer knowledge along with extrusion, injection molding experience and metallurgy., • Knowledge of and exposure to product testing and data collection, • Experience working under quality systems designed to meet governmental regulations such as FDA QSR, ISO 13485, and the MDD, • Working knowledge of mechanical design principles and FDA class 3 Agrregulated medical device design controls., • Medical Device experience in new product development with successful design from concept to commercialization is strongly preferred. This includes experience with medical device materials 12+ years product development, preferably in medical device industry., • Proficient in CAD software, preferably SolidWorks., • Familiarity with statistical analysis of raw data is required, proficiency in Minitab is preferred., • Experience with mechanical and/or electrical design, mechanical/electrical drawings, tolerance analysis, and computer-aided design (CAD), • Track record of strong cross-functional collaboration, influence without authority, and project management enabling highly effective project team Knowledge, Skills, and Abilities: • Excellent hands-on mechanical prototyping, verification, and failure analysis skills., • Proficient in Risk Management according to ISO 14971., • Knowledge of ASME Y14.5 GD&T., • Proven self-starter who runs towards critical issues, ambiguous requirements, or loosely defined challenges with a demonstrated ability to rally teams to achieve business results., • Familiarity with design control according to 21 CFR 820 or ISO 13485, engineering change orders (ECO), Corrective Actions and Preventive Actions (CAPA)., • Strong leadership skills and mentoring capabilities, • Strong quantitative analysis and problem-solving skills and methodologies, • Strong interpersonal and communication skills (oral/presentation and written), • A flexible team player, focusing on shared goals with a positive results‐oriented attitude.

DIRECT CANDIDATES ONLY, IF INTERESTED APPLY THROUGH JOB POST. NO DIRECT MESSAGES. RECRUITERS: DO NOT CONTACT. SUMMARY OF THE JOB: The Senior Electrical Engineer will work on a small electrical team to develop diagrams, schematics, and documentation associated with the electrical design of the system. Specifically, they will be responsible for the electrical design of specific modules within the IVL console helping to ramp production and contribute to new designs. Applicant should be familiar with analysis and troubleshooting of common digital interfaces such as UART, SPI, I2C, CAN, and ethernet along with troubleshooting analog signal paths and stepper motors. Familiarity is required with medical electrical standards such as IEC 60601-1 and IEC 60601-1-2 and should be able to work in a cross-functional team environment. Application should be able to clearly explain technical concepts to individuals with a non-technical background. Although they will be responsible for specific modules they will contribute reviews, suggestions, and ideas to other team member’s areas of responsibility. Applicant will work with individuals in software, mechanical engineering, optical engineering, quality, and regulatory to collaborate on the underlying hardware needs, timelines, and costs. Responsibilities: Under limited supervision, and in accordance with all applicable federal, state, and local laws and regulations and Bolt Medical procedures and guidelines, the responsibilities of the position include performing the following activities: • Developing, testing and integrating real-time electrical circuits., • Developing tools for production testing and data analysis., • Diagnosing electrical issues and recommending corrective/preventative plans., • Planning, conducting, and documenting tests in written reports., • Participation in development project core teams and reviews., • Other duties assigned as needed. Qualification: Education: A Bachelor’s Degree in Electrical Engineering or equivalent is required. Required Experience: • Must have four (4) plus years of hands-on experience in Embedded Hardware design including technology or product development responsibility., • Must have hands on experience testing hardware performance with embedded software/firmware, utilizing JTAG interface, logic analyzers, Oscilloscopes or similar equipment., • Must have experience in design transfer to production and communication to non-technical or unfamiliar individuals., • Must have experience in creating/maintaining schematics and layout., • Must have working knowledge of analog circuit design for signal measurement., • Experience with laser and optics an advantage., • Ability to write firmware in C/C++ is an advantage., • Experience with Altium Designer is required., • Must have excellent communication and writing skills., • Must be able to express complicated technological ideas to non-technical groups., • Must have strong analytical reasoning with modeling and statistical approach to analysis., • Self-driven individual who is capable and excited to learn about new technologies.

DIRECT CANDIDATES ONLY, IF INTERESTED APPLY THROUGH JOB POST. NO DIRECT MESSAGES. RECRUITERS: DO NOT CONTACT. Position overview: The Senior Quality Engineer will be responsible for providing quality engineering support and leadership for Manufacturing Process development and implementation. This position will work closely Manufacturing in the manufacture of disposable medical catheters in compliance with applicable regulatory and statutory requirement. Essential Duties and Responsibilities: • Oversee EO sterilization validation processes and ensure routine sterilization activities meet regulatory standards., • Support environmental monitoring and clean room verifications according to schedule and assist with excursion investigations., • Review and approve manufacturing validation test plans, protocols, and test reports., • Lead the completion of risk management deliverables, including process Failure Mode and Effects Analysis (pFMEA) and Control Plans., • Support and lead test method validation activities to ensure accurate and reliable testing processes., • Develop, review, and approve inspection plans, Device History Records (DHR), and product drawings for new products., • Create and implement quality plans as needed to ensure product and process compliance., • Develop activities aimed at preventing and detecting defects during the manufacturing process., • Recommend and provide statistical support, expertise, and analytical problem-solving for process validations and Engineering Protocols., • Support activities related to Management Reviews, internal and external audits, deviations, Corrective and Preventive Actions (CAPA), Non-Conformance Reports (NCR), Supplier Management, and Returned Goods Authorization (RGA)., • Provide support to the New Product Development team activities., • Lead the resolution of quality issues related to NCRs and CAPAs., • Ensure compliance with quality system procedures and all regulatory requirements. Technical Expertise • Provide technical expertise regarding component schematics and component inspection requirements., • Identify improvement opportunities related to the quality system and product., • Ensure the contents of Design History Files (DHF), Device Master Records (DMR), and Device History Records (DHR) are accurately developed and verified., • As needed oversee the calibration and preventive maintenance program to ensure equipment accuracy and reliability., • As needed be responsible for managing supplier quality activities, including supplier audits, performance assessments, and quality agreements. Required Education/Training/ & Experience: • Bachelor's degree in a scientific/engineering discipline; or equivalent combination of education and experience., • Minimum 5 years of relevant work experience in either pharmaceutical, medical device, or other highly regulated industry. Knowledge, skills, and abilities: • Experience in catheter design and production, or with similar medical devices, while working within Quality is required., • GMP experience working within ISO 13485, ISO 14976 and FDA 21 CFR Part 820 environments., • Capable of reviewing and interpreting drawings, • Experience in Risk Management Records and Risk Analysis., • Experience in performing test method validation and Gage R&Rs, • Understanding of statistical techniques such as normality analysis, tolerance analysis, and should be able to analyze and interpret data with high confidence., • Must know how to use Minitab or other statistical software, • Expertise in Sterilization (EO) is preferred (ISO 11135), • Knowledge in biocompatibility is preferred (ISO 10993 and associated variants), • Strong analytical, planning and organizational skills, • Strong interpersonal and communications skills (oral & written), • Self-starter with ability to work independently under pressure and react quickly to changing priorities, • Proficient in MS Office Word, Excel, Power Point, Project, Visio.

Job Description We are seeking talented individuals to support our Site / Civil practice. Selected individuals will play a key role in the design, permitting, and construction of food processing facilities throughout the United States. The professional will be a member of our Civil Department and his/her responsibilities will include, but not be limited to: • Conceptual and detailed site layout, • Site grading and drainage design, • Site utility design, • Working within a team for complex projects, or independently for moderate projects, • Performing moderate design tasks independently and collaborating with others for complex projects, • Assisting Senior Civil Engineers in managing design and permitting tasks, • Current Junior or Senior pursuing a Bachelor’s degree in Civil Engineering, • Experience in Civil Engineering for industrial or commercial projects (Internship or Co-Op strongly preferred), • Experience of foundation, land development, building pads, drainage, grading, and utility design., • EIT/FE certification preferred, • Candidate should be proficient with design software such as AutoCAD Civil 3D, • Experience with Hydraulics and and Hydrology (H&H) software preferred We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job Description Nordic Naturals, a leading Omega-3 Fish Oils supplement brand. The Packaging Systems and Automation Engineer is responsible for evaluating, designing, implementing, and continuously improving automated packaging systems for softgel bottling, liquid filling, and gummy packaging lines. This individual will lead equipment upgrades, automation projects, and packaging technology improvements to increase line speed, reduce waste, maximize OEE, and support future growth through capacity expansion.This engineer will work closely with the production, maintenance, and quality teams to ensure equipment runs reliably and efficiently, while also coaching and training operators on best practices. This role plays a key part in building a world-class packaging operation that is lean, scalable, and technologically advanced. ESSENTIAL FUNCTIONS Reasonable Accommodations Statement To accomplish this job successfully, an individual must be able to perform, with or without reasonable accommodation, each essential function satisfactorily. Reasonable accommodations may be made to help enable qualified individuals with disabilities to perform the essential functions. Essential Function Statement(s) Packaging Equipment and Automation * Lead automation and systems engineering initiatives for bottling, labeling, capping, induction sealing, shrink bundling, case packing, liquid filling, and gummy packaging lines. * Specify, source, and install state-of-the-art packaging equipment, robotics, and control systems to improve efficiency, accuracy, and flexibility. * Work closely with OEMs and integrators on equipment design, FAT, installation, commissioning (IQ/OQ/PQ), and training. * Standardize and integrate PLC, HMI, SCADA and sensor-based control systems for consistent and automated performance monitoring. Line Performance & Process Improvement * Analyze packaging line bottlenecks and implement engineering solutions to increase line speed, reduce scrap, and improve throughput without compromising quality. * Drive continuous improvement using Lean, Six Sigma, and OEE tracking to boost packaging line reliability and uptime. * Develop and implement changeover reduction strategies (e.g., SMED) to improve packaging flexibility and responsiveness. Capacity Expansion & Technology Strategy * Lead or support capital projects related to new line installations, facility upgrades, or automation expansions. * Develop packaging system strategies aligned with company growth plans and industry advancements in digital manufacturing. * Benchmark and recommend next-generation packaging technologies for vitamins, supplements, and liquid products. Collaboration & Support * Partner with Maintenance and Operations teams to implement robust preventive and predictive maintenance plans for all packaging assets. * Support root cause analysis and corrective action for downtime, quality deviations, or efficiency loss. * Create technical documentation including equipment specifications, SOPs, and maintenance instructions. POSITION QUALIFICATIONS Competency Statement(s) * Positive – Ability to view all situations with a positive attitude. * Innovative – Ability to look beyond the standard solutions and “think outside the box”. * Detail Oriented – Ability to pay attention to the minute details of a project or task. * Enthusiastic – Ability to bring energy to the performance of a task. * Friendly – Ability to exhibit a cheerful demeanor toward others. * Initiative – Ability to make decisions or take actions to solve a problem or reach a goal. * Organized – Possessing the trait of being organized or following a systematic method of performing a task. * Reliability – The trait of being dependable and trustworthy. SKILLS & ABILITIES Education: * Bachelor’s degree in Mechanical Engineering, Electrical Engineering, Automation Engineering, Mechatronics Engineering is a must. Experience: * 7+ years of hands-on experience with packaging and production line systems automation in pharmaceutical, nutraceutical, supplement or food industries. * Hands-on experience with bottling lines, liquid filling machines, labelers, case packers, and other downstream packaging equipment. * Experience with vision inspection systems, servo drives, robotics (pick & place, palletizers), and conveyor systems. * Proficiency in PLC programming (Allen-Bradley, Siemens, etc.), HMI/SCADA systems configuration, and industrial communication protocols. * Experience with robotic systems (e.g., ABB, FANUC, Yaskawa) integration and programming. * Hands-on experience with automation and control of CIP (Clean-In-Place) systems, including validation and optimization of cleaning cycles. * Familiarity with Industry 4.0 technologies, IoT devices, smart factory solutions, and data analytics platforms. * Excellent problem-solving skills, attention to detail, and a proactive approach to improving equipment, processes, and cleaning systems. * Strong communication skills for cross-functional collaboration with production, engineering, maintenance, quality, and IT teams. * Strong project management skills with the ability to handle multiple priorities * LEAN Certification (e.g: Green Belt / Black Belt) is highly preferred. Computer Skills: * PLC Programming Software (e.g., Rockwell Studio 5000, Siemens TIA Portal, Schneider EcoStruxure) * HMI and SCADA Software (e.g., FactoryTalk View, Ignition by Inductive Automation, Wonderware, GE iFIX) * Industrial Networking and Protocols (e.g., configuring Ethernet/IP, Profinet, Modbus TCP networks) * Robotics Programming Tools (e.g., ABB RobotStudio, FANUC ROBOGUIDE, Yaskawa MotoSim) * CAD Software for reviewing mechanical and electrical layouts (e.g., AutoCAD, SolidWorks Electrical, EPLAN) * Simulation and Modeling Tools (e.g., Siemens Process Simulate, Arena Simulation for manufacturing flow) * Data Acquisition and Analysis Tools (e.g., OSIsoft PI System, SQL databases, Excel advanced functions/macros) * MES (Manufacturing Execution Systems) or ERP Systems (understanding integration with SAP, Oracle, or specialized MES platforms) * Programming/Scripting Skills (optional) * CMMS and Maintenance Software (for asset management and predictive maintenance) (e.g., Fiix, UpKeep, IBM Maximo) * CIP System Automation Software (controlled through PLC/SCADA — familiarity with setting up/optimizing automated CIP recipes and sequences) Pay, Benefits & Perks: The estimated salary pay is $140,000 to $150,000. This pay is an estimate, and the exact compensation may vary depending on an applicant's location, skills, prior experience, professional qualifications, and other relevant factors. Additional compensation may also include incentive compensation (i.e. bonus or commission) if applicable. At Nordic Naturals, ‘step one’ toward achieving our goal of a healthy world is taking care of our family of employees. We offer a comprehensive and attractive benefits program to employees and eligible family members. Our benefits & perks include the following: • Multiple Health Plan Options, • Dental & Vision, • Dedicated Mental Health & Wellness Plan, • Access to Multiple EAP Plans, • Employer Paid Life Insurance, • PTO, • Paid Holidays (9 holidays per year), • Paid Sabbatical (3 weeks of paid sabbatical after every 5 years of employment), • 401(k) Retirement Plan (employer matches dollar for dollar up to 3%), • Free Monthly Supplements, • Product Discount Program At Nordic Naturals, we’re committed to delivering the world’s safest, most effective nutrients essential to health. Our award-winning omega-3 fish oil and other foundational nutrients are research supported, expertly formulated, rigorously tested, proven effective and, best of all, great tasting. With products for the whole family, we deliver the nutrients essential for healthy living.

Job Description Title: Mobile Development Lead Engineer Location: Carlsbad, CA Hanwha Vision America (HVA), formerly known as Hanwha Techwin, is an affiliate of the Hanwha Group, a Fortune Global 500 company. HVA is an industry-leading provider of advanced network video surveillance products, including IP cameras, storage devices, and video management systems, founded on world-class technologies. We offer end-to-end security solutions and have achieved global success across a wide range of industry verticals, including retail, transportation, education, banking, healthcare, hospitality, and airports. Hanwha Vision America is seeking a highly experienced Mobile Development Lead Engineer to join our team. This is a full-time, on-site position. In this role, you will be a key leader, responsible for the hands-on design, development, and maintenance of our IoT SaaS-based iOS and Android mobile applications, which are focused on real-time, low-latency video streaming. You will be a technical leader, responsible for driving architectural decisions, ensuring mobile application scalability and security, mentoring other engineers, and tackling our most complex engineering challenges. This role requires collaboration with the company’s presence across various global teams (US East, US West, South Korea, India) to align with the Product Management and Product Engineering Processes to deliver a world-class user experience. RESPONSIBILITIES Security Focus Champion and implement mobile development cybersecurity best practices. Analyze results from source control analysis and penetration testing, integrating security into the design lifecycle. Technical Leadership Lead the design and development of native mobile applications, with a primary focus on iOS and an ability to contribute to Android development. Work hands-on to write clean, efficient, and well-documented code for our video streaming applications. Mentor and guide other developers on the team, leading technical design sessions and code reviews. Best Practices & Quality Act as a champion for our secure Software Development Life Cycle (SDLC) process, enforcing high standards for software development, including the use of design patterns, comprehensive design documentation, rigorous unit testing, and thorough code reviews. Collaboration Champion the company’s vision and core values through your work while collaborating with our global engineering teams, product managers, project managers, DevOps, QA, and other engineering teams to deliver high-quality features. QUALIFICATIONS • Bachelor's or Master's degree in Computer Science, Engineering, or a related field (or equivalent practical experience)., • 10+ years of professional software engineering lead experience in native mobile application development, with a strong emphasis on real-time, low-latency streaming., • Extensive experience with video codecs (e.g., H.264, H.265), streaming protocols (e.g., RTSP, WebRTC), and video playback libraries., • Extensive, hands-on experience in Agile mobile application development., • Extensive experience primarily on the iOS platform development. Complementary Android platform development is preferred., • A strong portfolio of native SaaS-based IOT mobile applications that you have designed, built, and commercially released., • Deep understanding and practical experience with iOS and Android edge-caching technologies, • Hands-on experience implementing and working with communication protocols such as HTTPS, MQTT, WebSocket, and WebRTC, • Mastery of software engineering best practices: design patterns, multithreading, comprehensive design documentation, unit testing frameworks, and code review processes., • Proven experience leading the design and development efforts and mentoring of a team of mobile developers., • Relocation is preferred, • A Korean bilingual is preferred

Job Description Maverc Technologies is seeking a highly skilled Automation and Cloud Services to join our dedicated team. This Position supports the Marine Corps Tactical Systems Support Activity (MCTSSA) by implementing and managing advanced cloud and automation infrastructure for C5ISR systems. The engineer will support agile infrastructure management and interface with diverse technical tea Position Summary: This role supports the Marine Corps Tactical Systems Support Activity (MCTSSA) by implementing and managing advanced cloud and automation infrastructure for C5ISR systems. The engineer will support agile infrastructure management and interface with diverse technical teams. Key Responsibilities: • Implement full-stack automation: provisioning, configuration, deployment, testing, • Develop agile infrastructure for integrated automation and joint management, • Build and manage automation tools and CI/CD pipelines, • Configure/administer cloud platforms (AWS, Azure, GCP, Azure Stack, Amazon Snow), • Document and commit automation code to Git repositories, • Train operations teams on automation tool usage Location: Camp Pendleton, California Salary: $130,000.00 Paid Time Off (For Qualifying Members) Requirements Minimum Requirements: • 7+ years of infrastructure IT operations experience, • 5+ years of software automation/development, • 2+ years scripting experience (e.g., Python), • IAT Level II certification, • Red Hat Certified Specialist in Ansible Automation, • AWS or Azure Associate certification, • Documented experience in network/system admin, virtualization (VMware, KVM, Hyper-V), • Git/GitLab experience Desired Qualifications: • Bachelor’s degree in computer science or related field, • Experience in DevOps, CI/CD pipelines, AI/ML systems, • Ansible Core/Ansible WorX (AWX)/Ansible Automation Platform (AAP), • Familiarity with cloud platforms: AWS, Azure, GCP, • U.S. Citizenship required, • Secret clearance with NATO access (no interim), • Adherence to MCEN security standards and cybersecurity training, • Compliance with DoD cybersecurity and OPSEC protocols Benefits Join Maverc. Be Valued. At Maverc, we are an inclusive community where diversity in all its forms is embraced, respected, and recognized as a true asset to the company. We are dedicated to fostering this inclusive environment, though we acknowledge that there is always room for improvement. Maverc is committed to evolving into a more inclusive and equitable organization, upholding the principles of equal employment opportunity and affirmative action. Maverc is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment based on gender, gender identity or expression, sexual orientation, race, age, religion, physical or mental disability, veteran status, or other protected characteristics under federal, state, and local laws. As a federal contractor, Maverc has implemented affirmative action programs to ensure non-discrimination and promote affirmative action in our policies and practices for qualified women, minorities, protected veterans, and individuals with disabilities. The narrative portion of Maverc's affirmative action plans is available for inspection at our offices during normal business hours. Employees and applicants interested in reviewing these plans should contact Human Resources at or for assistance. If you are interested in applying for a position with Maverc and require special assistance or accommodation to apply for a posted position, please contact our Human Resources department at or by calling 888-948-1468. Exceptional People, Outstanding Benefits Exceptional people are the cornerstone of any successful company. To attract and retain such talent, Maverc provides fulfilling work opportunities that complement a balanced lifestyle. We achieve this by offering exceptional benefits, enabling our employees to live and work well. • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Training & Development, • Work From Home

Kinovate Life Sciences, Inc. established in 2004 in Oceanside, California. A wholly owned subsidiary of Nitto Denko Corporation (), Kinovate was spun-off from Oceanside, CA based R&D facility Nitto Denko Technical Corp () with a mission to provide the highest quality materials to niche life science markets worldwide. Since its inception, Kinovate has grown to become the market leader in solid support in the oligonucleotide synthesis field. We are bringing the most creative minds in science and technology to develop medical discoveries and breakthroughs. Our customers are well-known in the biotechnology industry. We are in a growth phase within ISO work environment and leading towards a GMP Certification. KLS is seeking extraordinary people to join the team. KLS is proud to be an equal employment opportunity employer. Why Work Here Great place to work. Small subsidiary of large international company headquartered in Japan. Generous discretionary bonuses. Health, dental, vision, life, and disability insurance effective from date of hire. Additional benefits include 401(k), 3 weeks vacation in your first year, 12 paid yearly holidays, 5 paid sick days, tuition reimbursement and more. JOB SUMMARY: Under strategic leadership, sustain the improvement of the Quality Management Systems (QMS) and manages the development of quality assurance & systems staff. Utilize the following industry standards to drive high-quality products: Current Good Manufacturing Practice (cGMP), International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use (ICH), and International Organization for Standardization (ISO). Facilitate employee relations issues including coaching, mentoring, and disciplining including performance evaluation of employees. Provides strong leadership to motivate, guide and inspire employees to meet the organization’s business objectives with production. Lead the implementation phase of MasterControl, ensuring successful implementation, and post-implementation management. ESSENTIAL DUTIES and/or RESPONSIBILITIES: • Partners with leadership to develop the Quality Management System (QMS) and ensure it is compliant with relevant regulations, including ISO 9001, 21 CFR Part 210 and 211, ICH, and other applicable national and international regulatory guidelines.Ensure the QMS always remains in an auditable state., • Oversees the daily operations of the QMS, ensuring it runs efficiently and in compliance with quality standards. This includes managing critical quality systems processes such as Incoming Raw Material Receipt, Raw Material Review/Disposition, Final Product Review/Disposition., • Manages quality events and investigations including but not limited to Deviations, CAPA, Change Control, OOS, OOT, Customer Complaints, including leading and facilitating cross-functional meetings to ensure proper assessments and actions., • Ensures QA review of Validation/Qualification activities including protocols, execution, and reports., • Upholds timely response to events and on-the-floor QA support(MQA), including ensuring the MQA program is tracked and measurable., • Leads the transition of QMS programs, such as Quality Events (Deviation, CAPA, Change Control, OOS, OOT), Audits and Supplier Qualification transition into Master Control, and serves as the System Administrator., • Administers post-implementation management of MasterControl, including, but not limited to, system optimization, performing troubleshooting support, managing software updates, and continuously improving system functionality to meet evolving regulatory needs., • Reports key metrics for QA Operations turnaround times and Quality Events., • Contributes to the continuous improvement initiatives related to the QMS, collaborating with cross-functional teams to optimize quality processes. Analyze quality data and metrics to identify trends, root causes, and areas for process improvement within manufacturing and quality control activities., • Develops standard operations and other quality documents related to QMS and ensure all documents meet regulatory requirements and internal standards., • Supervises and develops a team providing guidance, training, and support to ensure compliance with regulatory standards and best practices., • Mentors and develops a team of the QA team, fostering an environment of accountability and growth. Ensures cross-functional collaboration and provide effective leadership managing the QMS processes and ensures effective employee relations., • Facilitates training initiatives to ensure that team members are adequately prepared to handle QMS functions and sustain a flexible workforce., • Fosters a culture of continuous improvement, supporting staff development and efficiency improvements within the quality systems team., • Conducts performance reviews for direct reports. Institutes timely corrective actions and interfaces with Leadership and HR in developing disciplinary actions up to and including terminations., • Administers time-keeping functions to track absenteeism; approves timecards on a bi-weekly basis. SUPERVISOR RESONSIBLITIES: • Quality Assurance Associate, • Quality Assurance Specialist, • Sr. Quality Assurance Specialist MINIMUM EDUCATION and/or EXPERIENCE: • Bachelor’s degree in a scientific discipline; and five (5) years’ directly related experience in a Good Practice (GXP) or ISO manufacturing-controlled environment or equivalent combination of education and experience., • Experience in transitioning from paper based to electronic QMS. KNOWLEDGE, SKILLS and/or ABILITIES: • Working knowledge of pharmaceutical industry concepts, as well as analytical methods and writing skills, including documenting manufacturing processes, a plus. Familiarity in Lean or Six Sigma, a plus., • Strong Knowledge of quality management principles and practices, including ISO and cGMP standards., • Proficient in the use of quality management software with experience in implementing or managing MasterControl being highly desirable., • Experience conducting technical investigations with formal root cause analysis tools., • Prior supervisory experience, preferred., • Knowledgeable of change control, validation/qualification, and method development and tech transfer., • Strong knowledge of formal root cause analysis and risk assessment tools. Ability to lead or facilitate investigations and/or risk assessments., • Strong application of critical thinking skills along with problem solving and creative skills to identify manufacturing issues for continuous improvement., • Strong multi-tasking skills, flexibility in responding to rapidly changing, dynamic processes and demands/pressures in a fast-paced environment., • Strong ability to verbally communicate across functional organizational groups, provide high-level customer service through effective interpersonal skills and conflict resolution, including communicating with equipment suppliers to obtain input on equipment modification and improvement., • Microsoft Office Suite software applications such as Excel, Word, Power Point, and other enterprise software applications such as Net Suite, LIMS, and Familiarity with statistical analysis tools., • Strong language skills with the ability to read, analyze and interpret general business periodicals, professional journals, technical procedures, or government regulations., • Write clear processes, manuals and reports for management review and present technical information in understandable terms and respond to questions from groups of customers, employees and/or public., • Work independently as well as in a small and/or large group and foster cooperation in a team environment using interpersonal skills to document working knowledge., • Work in a detail-oriented environment with strong follow-up, follow-through, and organizational skills. CERTIFICATES and/or LICENSES: • American Society for Quality Certified, a plus., • Certified Quality Engineer, a plus., • Certified Quality Auditor, preferred. PHYSICAL DEMANDS and/or WORK ENVIRONMENT: (Typical physical demands and the work environment characteristics an employee must meet and encounter while performing the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.) • Works in a typical office environment with prolonged periods in front a computer entering or researching data., • Regularly required to sit; use hands to finger, handle or feel and talk or hear., • Availability and willingness to travel if required for audits, inspection, vendor management or if requested to visit or attend a business transaction as legal agent of the company., • Must be able to work extended hours per the demands of the business.

The Senior Design Engineer will be primarily responsible for the development of new products and/or the enhancement of existing products. Involved in creating concepts and modeling and drafting designs utilizing 3D CAD software. Other responsibilities include drafting of design history file documents, development of test plans to assess designs, and assisting in the development of processes for Manufacturing, Quality Control, Regulatory and Planning. • Designs and develops surgical instruments utilizing SolidWorks., • Assists in the development of new products and manufacturing processes and/or serves as a member of a development team., • Assists in the development of working models to be used for design evaluation., • Generates protocols for testing and analyzing new and current products., • Generates design assurance documentation for the project Design History File (DHF)., • Collaborates on the development of inspection methods., • Initiates and executes design changes relative to manufacturability while maintaining critical features for in house manufacturing or vendors., • Serves on cross-functional product development teams responsible for new product development from concept through product launch., • Assists Project Engineers with providing technical input to marketing counterparts on the development of collateral marketing materials, • Assists Project Engineers with providing technical expertise to Marketing and Sales as to intent of design function., • Assists Project Engineers with providing technical expertise to Regulatory Affairs to support FDA 510(k) submissions and/or international registrations., • Creates and processes Change Orders (CO’s), • Typically requires a Bachelors degree and a minimum of 3 years of experience preferably in spine or implantable orthopedic medical devices. Co-Op experience can be applied., • Experience with 3D CAD software, preferably SolidWorks, • Strong verbal and written communication skills; comfortable presenting to senior management, • Knowledge in the use and interpretation of geometric dimensioning and tolerancing, preferred, • Prior experience in a manufacturing environment, including knowledge of manufacturing methods, predominantly with metals and plastics, preferred. #J-18808-Ljbffr

Description * This position will require up to 75% travel * Come put your Site Reliability Engineer (SRE) skills into action! Leidos has openings for talented SREs to join our team and work real-time hands-on fielding challenges and develop reusable solutions that support our customers in any environment. You will have the opportunity to contribute to the design requirements and implementation of improvements that accelerate the secure delivery, implementation, and sustainment of software in the field. You will automate the buildout of infrastructure in cloud and on-premises environments to operate Kubernetes clusters and microservices deployments. In this role, you will join dynamic Agile software teams that are singularly focused on providing world-class solutions to our customers in an exciting, collaborative, and inclusive atmosphere. You will be intellectually challenged and provided with a tremendous opportunity for growth in a fast-paced, and fun environment that includes both time in the field and with the software teams. You’ll learn, master, and improve the fielding and diagnostic features, processes and tools we use to deploy and sustain our Cloud-based and on-premises solutions into multiple hosting environments, such as AWS, Azure, VMWare, and others. You’ll learn new technologies and tools and apply what you’ve learned to overcome technological challenges with innovative solutions. You’ll collaborate with other software engineers and SREs to share your knowledge with the team and the organization to make us all better at what we do. You’ll perform technical spikes and develop concepts for improved fielding and remote diagnostics to achieve more efficient and sustainable fielding events. Primary Responsibilities: • Gather and analyze metrics from operating systems as well as applications to assist in performance tuning and fault finding of an microservice enterprise system (cloud and on-premises), • Partner with development teams to improve services, diagnostics, and deployment tools through gap identification, concept development, and rigorous testing and release procedures, • Participate in system design consulting, platform management, and capacity planning, • Create sustainable systems and services through service automation, • Design, develop, troubleshoot, and debug mission critical infrastructure on-prem and remote, • Manage on-premises and private/public cloud environments via infrastructure-as-code (IaC) and hands-on/client site activites., • Participate in the concept design of reusable infrastructure components for scalable, highly available, secure architectures for cloud native applications., • Enable the continuous integration and continuous delivery of our diverse suite of software products by applying best practices for infrastructure provisioning, configuration and automated software deployments., • Continually evaluate fielded system deployments and apply best practices to facilitate continuous improvement that can be applied across teams., • Work closely with other engineers to develop the best technical design and approach for new product installation and field service activities (software patches, cyber updates, etc.), • Develop solutions to complex technical issues and problems that impact multiple area or disciplines., • Communicate with internal team members across multiple areas and coordinate completion of key deliverables across teams., • Liaise with external and internal customer stakeholders on technical design decisions and trade-offs and ensure software solution will meet required functional, performance, and SLA thresholds, especially with customer network interfaces., • Mentor other SREs in the art of building deploying and maintaining production mission critical microservice enterprise systems., • Resolve roadblocks for the field service team, working collaboratively with the product engineering, technical leadership, and others. Basic Qualifications: • Typically requires a Bachelor’s degree in computer science or computer engineering with 4+ years of experience in a relevant field., • Must be able to pass an in-depth background check (CBP Public Trust BI)., • Experience delivering entire projects or processes spanning multiple technical areas., • Experience serving as a technical lead managing large projects or processes., • Working knowledge of Agile Development and continuous integration and continuous delivery methodologies and tools., • Expertise with Linux and Windows operating systems, network administration, and networking protocols/functions (e.g., HTTP, HTTPS, SSL/TLS, SMTP, DNS), • Expertise provisioning and managing resources within IaaS/Cloud infrastructures (e.g., Azure, AWS, Google Cloud Platform, etc.), • Experience with Terraform, Ansible, Helm, BASH Scripting, CloudFormation, Chef, Puppet, Ansible or similar technologies, • Expertise with container technologies such as Docker and container orchestration tools like Kubernetes, • Expertise with Kubernetes kubectl, • Expertise of a version control system (e.g., Git)., • Strong, self-motivated desire to learn new tools, frameworks, and techniques., • Ability to complete tasking independently with minimal direct supervision., • Ability to work and collaborate effectively within a multi-disciplined engineering team., • Troubleshooting PLC end-device software and service-level computers on the edge feeding our on-prem and cloud-based server systems., • Ability to travel up to 75% of times to remote locations, mostly in the US along the border to troubleshoot network and software bugs during initial deployment and sustainment., • U.S. Citizenship is required. Preferred Qualifications: • Experience with Enterprise Event Brokers Technologies (Kafka, NATS), • Experience with monitoring and alerting tools such as Grafana, Prometheus, • Experience with API Gateways such as ISTIO, • Experience with GitOps tools such as Argo CD, Flux CD, Fleet or similar, • Professional cybersecurity certification such as Security+, or similar., • Knowledge of Agile Development methodologies., • Familiarity with at least one Relational Database Management System (Oracle, MySQL, PostgreSQL, SQL Server, etc.). Salary Range for this position: $90,000 - $105,000 * This position will require up to 75% travel * July 1, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $85,150.00 - $153,925.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.