Solidworks jobs in Los Angeles, California - Page 4Create job alerts

Epirus is a high-growth technology company dedicated to overcoming the asymmetric challenges inherent to the future of national security. Epirus' flagship product, Leonidas, is a software-defined system built using intelligent power management techniques that allow power-hungry systems to do more with less. Job Summary: We are seeking a Senior Interactive Simulation Developer to lead the development of an immersive simulation environment for mission planning, training, UI/UX testing, and more. The ideal candidate will have a proven track record in developing high-quality products and simulations, particularly in Unreal Engine. As a senior team member, you will oversee the technical development, guide the project, and shape the simulation roadmap. • Interpret electrical schematics, wiring diagrams, and harness drawings to independently build and troubleshoot complex harness assemblies., • Manufacture prototype and production harnesses—including shielded, twisted pair, coaxial, high-voltage, and multi-branch—following Epirus work instructions and prescribed standards., • Install, route, and rework harnesses within mechanical assemblies, enclosures, and vehicles., • Perform continuity, resistance, insulation, and functional testing using multimeters, oscilloscopes, hipot testers, and network analyzers or other specialized in process equipment., • Setup and operate crimping tools (manual, pneumatic, and hydraulic) to perform precision crimps on a variety of contacts and terminals per IPC/WHMA-A-620 and MIL-spec standards., • Inspect and verify crimp quality using pull testing, crimp micrometers, and visual inspection under magnification., • Support First Article Inspection (FAI), development builds, rapid prototyping, and final acceptance of electrical harnesses., • Ensure workmanship quality, maintain build traceability, and uphold zero-defect standards through proper documentation and process control., • Collaborate with production, test, and quality teams to resolve build issues and implement corrective actions., • Mentor and train Junior Harnessing Technicians., • Maintain accurate records of builds, rework, and inspections in accordance with AS9100 and ISO9001 quality standards., • 5+ years of hands-on experience building aerospace/defense or high-reliability electrical harness assemblies., • Expert knowledge of hand tools and equipment used for crimping, stripping, cutting, and soldering., • Strong soldering skills. Ability to hand solder lap and lash splices, and fine pitch soldering cups., • Strong understanding of IPC/WHMA-A-620 standards, J-STD-001, and NASA workmanship standards., • Ability to read and interpret complex electrical and mechanical drawings, BOMs, and manufacturing plans., • Proficient with test equipment such as multimeters, hipot testers, and oscilloscopes., • Proven track record of building complex harnesses., • Comfortable in a fast-paced, iterative, and high-standards environment., • Minimum 8+ years' experience as a technician in defense, aerospace, or equivalent high‐reliability field, • Certified to J-STD-100, IPC-620, and IPC-610 or NASA STD8739.4, • Strong knowledge and experience in manufacturing, troubleshooting, testing, rework and repair of harnessing, • Experience with connectors (e.g., D38999, Glenair, Micro-D, Nano-D, MIL-spec coax)., • Familiarity with spacecraft, UAV, missile, or ground combat system harnessing practices., • Experience with cleanroom protocols and ESD-safe practices, • Experience with PLM and MES systems such as Oracle, Epicor, Ion, JIRA etc., • Ability to support light CAD work for layout and harness routing (SolidWorks Electrical, E3, or similar)., • May be to retain a TS Clearance ITAR REQUIREMENTS: • To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR ___. At Epirus, you’ll work with technical peers and great people—and get first crack at some of the defining technology challenges of our time. Here, “impossible” is just a challenge. We're a diverse, fast-growing team of change-makers fueling the future of energy with revolutionary solutions. ___ As required by the Equal Pay Transparency Act, Epirus provides a reasonable range of minimum compensation for roles that may be hired. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and specific office location. For the state of California only, the range of starting pay for this role is:$76,500—$96,900 USD

Rivers Agile is a deep tech consulting firm specializing in custom solutions across various industries. Founded in 2008 as a quality assurance consultancy, we have expanded our expertise to include autonomous solutions, Agentive AI, and XR research. Our strong foundation in quality assurance ensures efficient, agile software development while aligning every solution with business goals. Our collaborative team of software engineers, QA engineers, and project managers partners closely with clients to tackle complex challenges. We seek engineers who are lifelong learners, passionate about their craft, and defined by their unique personality, experience, and style. Location: This is primarily an onsite position in the northern Pittsburgh metro area. Candidates must be local or willing to relocate. What you’ll do • Design and execute reliability test plans for mechanical and electro-mechanical systems, including cyclic testing of sub system components., • Analyze complex systems and breaking testing down into subsystem components for effective testing, • Accelerated lifecycle testing to evaluate life expectancy of mechanical components, • Predictive analytics to determine preventive maintenance schedules, • Specify, develop, or guide the fabrication of custom test fixtures using internal teams or external vendors (e.g., CNC machining, weld fabrication)., • Automating tests and collecting results for analysis through scripting or other means, • Ability to read electrical and mechanical drawings, • Statistical analysis and data interpretation, • Able to work independently and make decisions with limited supervision, • Advanced troubleshooting experience, • Collaborate with design, electrical, and systems engineering teams to support product reliability efforts.Qualifications, • Bachelor’s degree (or higher) in Mechanical Engineering or a related discipline., • 5-7 years of experience in reliability testing, mechanical validation, or test engineering., • Experience in complex electro/mechanical systems i.e. AGVs, AMRs, robotics, • Experience with reliability techniques i.e. FMEA, RCA, FTA, DoE, DMAIC, • Familiarity with mechanical fixture design, structural analysis, or test automation., • Experience with reliability methodologies such as Design for Six Sigma (DFSS), Six Sigma, or Lean., • Proficient in data analysis and statistical methods to interpret test results and failure patterns., • Understanding industrial hardware and component manufacturing processes., • Experience with CAD software (e.g., SolidWorks, AutoCAD, AutoDesk), • Familiarity with electrical or control systems integration is a plus., • Experience with reliability analysis software i.e. Minitab, JMP Nice-to-Have Skills:, • Experience inspecting hydraulic or pneumatic components (e.g., cylinders) under magnification., • Understanding of test fixture ergonomics, mobility within a facility, and adaptability to various environmental constraints.

• Job Identification 117199, • Job Category Operations, • Posting Date 04/21/2026, 04:41 PM, • Locations 801 S Placienta Ave, Fullerton, CA, 92831, US 800 S State College, Fullerton, CA, 92831, US (On-site), • Job Schedule Full time, • Remote Work Schedule Availability? None The person in this position will be part of the Machine building team that is responsible for design and manufacturing of new and rebuilt machines to support HFS facilities worldwide. This group is responsible for the implementation of projects to upgrade existing equipment and systems, coordinates and supports custom machine building projects and assists in the selection, procurement and installation of our new custom equipment to support HFS manufacturing process. Essential Duties and Responsibilities: • Design, develop, manage and maintain control systems (i.e. Distributed Control System, Programmable Logic Controller). Perform all work and conduct oneself in a manner that promotes safety of the individual and all other employees., • Troubleshoot, make necessary repairs or upgrades, and perform preventative maintenance and service to process control equipment, control systems, equipment calibration, and instrumentation equipment to provide for the reliable operation of this equipment. Investigate problems, analyze for root causes, and derive resolutions., • Collaborate with engineers, purchasers and other staff members involved in the production processes including reviewing instrumentation and control related documents to mechanical, electrical and process equipment technical specifications and vendor drawings of equipment and prepare comments and recommendations., • Participate in installation and startup and commissioning activities to assist personnel in systems checkout and commissioning, including any control system programming modifications, coordinating with the control system suppliers and coordinating resolution to problems within other disciplines., • Ensure that the instruments and controls comply with all internal and external health and safety regulations and requirements., • Develop best practices to improve production capacity, quality, and reliability., • 3+ years manufacturing related experience and/or training, or equivalent combination of education and experience., • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position., • Experience in automation and or fabrication Preferred Qualifications: • Bachelor's degree preferred., • Prefer a Bachelor's Degree in Electrical Engineering, Industrial Engineering, or Mechanical Engineering, from an accredited institution., • Minimum of (3) years of experience with control systems (i.e. Distributed Control System, Programmable Logic Controller); Allen Bradley PLC's and Siemens HMI's (touch panel, IPC)., • Basic understanding of electrical and mechanical systems, including hydraulic, pneumatic, and control systems., • Experience with industrial robots (e.g., Fanuc) and Vision systems., • Experience of electrical design with the ability to read, write and design using AutoCAD and or SolidWorks electrical software., • Experience troubleshooting, repairing, and performing preventative maintenance and service to industrial process control equipment., • Work with and train technicians on proper wiring connections, basic programming, and basic system protocols., • Ability to effectively present information and respond to questions from groups of managers, employees, and vendors., • Strong written and verbal communication skills. Benefits/Salary: The position includes competitive wages and a comprehensive benefits package available day one of hire, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. The salary range for this position is $95,000 to $125,000. , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email , Howmet Fastening Systems (HFS) is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment.

• Job Identification 115560, • Job Category Engineering, • Posting Date 01/21/2026, 04:54 PM, • Locations 3000 W Lomita Blvd., Torrance, CA, 90505, US (On-site), • Job Schedule Full time Responsibilities Perform a variety of engineering assignments in work measurement for the establishment of standards. Conduct analytical studies on engineering proposals to develop and detail processes for product manufacture. Develop cost estimates. Develop and issue production routings to manufacture products to the specifications and standards established by the Engineering groups. • Determine feasibility and method to manufacture new products, whether in-house or from outside source, and estimate cost based on various manufacturing methods., • Determine method of manufacturing which will result in production of product as it was designed., • Confer with Manufacturing and Project Engineer and/or corresponding production personnel to determine the method of manufacturing products in the most efficient manner versus cost of production, machine capability, machine availability, and skill availability., • Confer with Quality Control to ensure method of manufacturing will result in product consistent with customer and internal quality requirements., • Generate, maintain, and assist in the preparation of product structures, production routings, product BOM, and part information including approvals, equivalent part numbers and cost information in the manufacturing databases., • Edit work order routings to assure work centers, rates, operation codes, and manufacturing sequence is correct and complies with approved methods before release to production., • Investigate, update and/or create production routings to reflect cost saving method of manufacturing., • Review and approve changes to drawings, specifications, and other engineering documents, and apply the changes to the product structures and manufacture process documentation., • Review and evaluate inefficiencies and inconsistencies in actual production methods compared to the planned methods and analyze potential long-term solutions to minimize variation in a cost-effective manner. Update or create routings to reflect cost savings methods of manufacturing., • Assist Manufacturing Engineers to determine production machine rates and standards for inclusion in product structures., • Interact with Project Engineering, Manufacturing, Sales department, and the vendors as needed in the performance of assigned duties., • Participate in ABS Workshops and Kaizen events both within the assigned product group, and in other product groups., • Participate in proactive team effort to achieve departmental and company goals., • Provide leadership to others through example and the sharing of knowledge/skill., • Comply with all safety policies, procedures and practices as it relates to office/production working environments i.e. PPE (Personal Protective Equipment) when entering production environment., • Bachelor's degree in an engineering discipline, • 1+ years of experience in manufacturing and/or engineering, • Employee must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position., • 2+ years of experience in high volume manufacturing, • Familiarity with fastener manufacturing, • Strong proficiency with MS Office (Excel, PowerPoint, Word, Outlook) and related computer skills, • Advanced skills in MS Excel & Project, able to create pivot tables or macros, and analyze data, • Must be able to read blueprints, and understand basics of measurement techniques and tools, • Exceptional written/oral communication, presentation and interpersonal skills., • Strong organizational skills, ability to manage multiple large projects and interact with all organization levels, • Experience with using systems such as QAD, AS 400, or other MRP system desirable., • Proficient in the use of computer aided design/drafting software (SolidWorks and AutoCAD) The position includes competitive wages and a comprehensive benefits package available day one of hire, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. The salary range for this position is $67k-$95k. , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email

Department Summary The Institute for Carbon Management (ICM) is a cross-campus technology-translation entity at the University of California, Los Angeles (UCLA). ICM translates pioneering carbon management solutions from the (laboratory) bench-scale to pre-commercial/commercial-scale devices, prototypes, and (software) solutions. ICM's activities span two major focus areas: (1) Technologies for carbon dioxide removal (from the atmosphere), utilization, and avoidance, and (2) Technologies for creating new supply chains, and processing approaches for critical materials and elements (e.g., Fe, Li, Ni, Co, Mn, Mo, Mg) that are foundational to accelerating the clean energy transition, as well as reducing the carbon footprint of extractive processes. ICM is organized into action teams that are convergent, agile, and world-class. Prominently, these action teams have enabled ICM-born technologies to be awarded the NRG COSIA Carbon XPRIZE, and the 2021 Liveability Challenge, among others. ICM's technologies are now being commercialized via spin-out companies including CarbonBuilt Inc., Concrete-AI Inc., and SeaChange Inc. Position Summary The Institute for Carbon Management (ICM) is a cross-campus technology-translation entity at the University of California, Los Angeles (UCLA). ICM is seeking a hands-on electrochemical engineer to support the cell design, process design, prototyping, and scale-up of electrowinning cells for metal recovery. The successful candidate will lead the development of experimental reactor systems that enable selective metal deposition from ores, while integrating specialized flow paths, solid-handling systems, and HER-suppressing architectures. Solid foundational understanding of transport phenomena and electrochemistry is a must. This role bridges electrochemistry, engineering design, and practical implementation, with opportunities to contribute from concept through pilot-scale deployment. Salary & Compensation *UCLA provides a full pay range. Actual salary offers consider factors, including budget, prior experience, skills, knowledge, abilities, education, licensure and certifications, and other business considerations. Salary offers at the top of the range are not common. Visit ___ to discover benefits that start on day one, and ___ to calculate the total compensation value with benefits. Qualifications • Three years or more Experience in prototyping or operating electrochemical systems, electrolyzers, flow reactors, or similar technologies. (Required), • Experience with electrodeposition systems, electrolyzers, or battery module hardware. (Preferred), • Experience performing process modeling such as COMSOL, Ansys, ASPEN, etc. (Preferred), • Strong background in aqueous electrochemical systems, and electrodeposition processes. (Required), • Proficiency with mechanical design tools (e.g., SolidWorks, AutoCAD) and system integration. (Required), • Hands-on experience with equipment testing. (Required), • Ability to work independently and communicate results clearly across multidisciplinary teams. (Required), • Have a good understanding of lab safety procedures and ability to consistently operate safely. (Required), • Demonstrated ability to work independently, build hardware, and iterate quickly based on testing. (Required), • Understanding of electrochemical cell assembly, including electrodes, membranes, and current collectors. (Preferred), • Background in aqueous electrochemical systems, and electrodeposition processes. (Preferred), • Knowledge of fluid dynamics, pressure drop, and flow control in multiphase systems. (Preferred), • Bachelor's Degree in Electrochemistry, Mechanical Engineering, Chemical Engineering, Materials Science or a related field (Required), • Master's Degree Electrochemistry, Mechanical Engineering, Chemical Engineering, Materials Science or a related field (Preferred) 8:00 a.m. to 5:00 p.m. Union/Policy Covered TX-Systemwide Technical Complete Position Description

The Aerospace Corporation is the trusted partner to the nation’s space programs, solving the hardest problems and providing unmatched technical expertise. As the operator of a federally funded research and development center (FFRDC), we are broadly engaged across all aspects of space— delivering innovative solutions that span satellite, launch, ground, and cyber systems for defense, civil and commercial customers. When you join our team, you’ll be part of a special collection of problem solvers, thought leaders, and innovators. Join us and take your place in space. The Vehicle Systems Division (VSD) sits at the center of the ideas and data behind current and future systems supplying innovative research and development; technical evaluations during the acquisition process; conceptual and detailed design; assembly, integration, and test; and operational support. Comprised primarily of highly-trained mechanical and aerospace engineers, VSD provides national expertise in the areas of vehicle engineering; guidance, navigation, and controls; robotics; electro-mechanical devices; embedded systems; fluid mechanics; propulsion; thermal control; mechanisms; structures; structural dynamics; and dynamic environments.� � The Mechanical Systems Department (MSD) team has 20-25 engineers responsible for providing technical mission assurance support to ensure the integrity and reliable operation of moving mechanical assemblies (MMAs) and explosive devices used during separation and deployment events of space vehicles, launch vehicles, and missile systems. The Space Mechanisms Section is responsible for the evaluation of requirements, design, analysis, and testing of space vehicle MMAs in accordance with industry standards. This section works closely and coordinates with other Aerospace technical disciplines, program offices, and contractors in support of our customer’s mission needs.� As a Senior Space Vehicle Mechanisms Engineer (Senior Engineering Specialist - Aeronautical and Mechanical Engineering) within the Space Mechanisms Section, you will� work with the section managers and other engineering departments to conduct multi-disciplinary analyses and lead efforts required to ensure mission success for current and future missions. This position leverages experience in the areas of moving mechanical assemblies, deployment and separation systems, and explosive devices, to support our programs and departmental responsibilities. This position is full-time, on-site at our facility in El Segundo, CA., requiring at least 4 days onsite. What You’ll Be Doing * Lead efforts and perform evaluations of moving mechanical assemblies for space vehicles, launch vehicles, and missile system programs * Lead efforts and provide in-depth technical support for interdisciplinary and interdepartmental activities and capable of working with both analysis and laboratory teams to evaluate issues impacting moving mechanical assemblies * Review and assess designs, analysis results, test plans, command media, and applicable standards * Work closely with program offices, department technical staff, government customers, and management to resolve technical issues and assure mission success * Prepare and provide reports and briefings to customers and other stakeholders * Travel to contractor and vendor sites to attend design reviews and witness hardware assembly and testing * Develop problem definitions, problem-solving approaches, new analytical tools and innovative approaches while obtaining buy-in from staff and the leadership team * Lead technical efforts, provide guidance and mentor junior staff, and work with other senior staff� in support of program tasks What You Need to be Successful� � Minimum Requirements: * Advanced degree in a STEM field * 10 years of applicable professional experience in space vehicle, launch vehicle, missile system program or other technical areas supporting the field of physical sciences or engineering * Experience with design, analysis, test, and manufacture of moving mechanical assemblies * Experience with CAD (SolidWorks or equivalent) * Experience with finite element analysis * Experience with Python, MATLAB * Willingness to� occasionally travel and/or work off-business hours to support customer needs, 5-10% (as required) * Ability to obtain and maintain a security clearance, which is issued by the U.S. government. U.S. citizenship is required to obtain a security clearance.� How You Can Stand Out� � It would be impressive if you have one or more of these: * PhD in a STEM field� is preferred * Experience with deployables (motors, gears, hinges, launch restraints), bearings (gimbals, reaction wheels, CMGs), separation systems, and or valves * Knowledge of moving mechanical assembly standards (AIAA-S-114A or NASA-STD-5017B) and environmental testing standards (SSC-S-016 or NASA GEVS) * Experience with multi-body dynamics analysis (ADAMS or equivalent) * Experience with command-line interface, high performance computing, Git * Experience with relevant Mechanical Assemblies (MA) supply chains * Ability to expand the business base into other areas * Flexibility in leading very diverse teams including analysis, lab, and mixed analysis with physical evaluation teams * Self-directed with the capacity and a proven record of developing projects and advancing new ideas * Experience leading technical teams and guiding/mentoring early-career staff * Active TS/SCI security clearance We offer a competitive compensation package where you’ll be rewarded based on your performance and recognized for the value you bring to our business.� The grade-based pay range for this job is listed below.� Individual salaries within that range are determined through a wide variety of factors including but not limited to education, experience, knowledge and skills. (Min - Max) $151,300.00 - $226,900.00 Pay Basis: Annual Leadership Competencies Our leadership philosophy is simple: every employee, regardless of level and role, can demonstrate leadership. At Aerospace, our commitment is our people. To cultivate our talent and ensure that we have a strong pipeline of future leaders, we want individuals who: • Operate Strategically, • Lead Change �, • Engage with Impact �, • Foster Innovation �, • Deliver Results � Ways We Reward Our Employees During your interview process, our team will provide details of our industry-leading benefits. Benefits vary and are applicable based on Job Type.� A few highlights include: * Comprehensive health care and wellness plans * Paid holidays, sick time, and vacation * Standard and alternate work schedules, including telework options * 401(k) Plan — Employees receive a total company-paid benefit of 8%, 10%, or 12% of eligible compensation based on years of service and matching contributions; employees are immediately eligible and vested in the plan upon hire * Flexible spending accounts * Variable pay program for exceptional contributions * Relocation assistance * Professional growth and development programs to help advance your career * Education assistance programs * An inclusive work environment built on teamwork, flexibility, and respect We are all unique, from various backgrounds and all walks of life, yet one thing bonds all of us to each other—the belief that we can make a difference. This core belief empowers us to do our best work at The Aerospace Corporation. Equal Opportunity Commitment The Aerospace Corporation is an equal� opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, age, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender, gender identity or expression, color,� religion,� genetic� information, marital status, ancestry, national origin, protected veteran status, physical disability, medical condition, mental disability, or disability status and any other characteristic protected by state or federal law. If you’re an individual with a disability or a disabled veteran who needs assistance using our online job search and application tools or need reasonable accommodation to complete the job application process, please contact us by phone at 310.336.5432 or by email� at� ___ .� You can also review� ___.

• Job Identification 116448, • Job Category Operations, • Posting Date 04/21/2026, 01:44 AM, • Locations 801 S Placienta Ave, Fullerton, CA, 92831, US (On-site), • Job Schedule Full time, • Remote Work Schedule Availability? None Howmet Fastening Systems (HFS) is seeking a Tooling Specialist IV- 1st Shift for our Fullerton, CA location. At this facility Machine building is responsible for the Design and manufacture of specialized, custom automation solutions in support of Aerospace fastener manufacturing. Utilizing the latest technology in PLC, machine vision, robotics, and smart manufacturing, we support HFS sites worldwide with their challenging production needs. In this role you will be responsible for supporting various aspects related to the production and support of custom machinery solutions. Including but not limited to custom new builds, re-builds, and retrofits. Primarily this is a Tool maker/machinist role. But this position offers great exposure to anyone looking to pursue growth in the field of industrial automation or robotics. Essential Duties and Responsibilities • Produce various machine parts and tooling to prints, or from sketches utilizing CNC mills Lathes and surface grinders., • Make drawings and sketches as needed to produce or reproduce critical tools or components., • Work accurately to meet precise tolerances of (+ .001)., • Assembly of new mechanical systems with instruction. Disassembly of existing mechanical systems for inspection and recommend repairs or replacements with or without instruction., • Machine, assemble, install machine guarding utilizing aluminum extrusions (80/20) and polycarbonate sheets to specification., • Work with design team and engineers to develop parts and processes for efficient economical manufacturing. Help produce proof of concept models and test fixtures., • On occasion Generate material and supply requests to support assigned work., • Provide guidance and support for installed systems at sister sites occasionally requiring some local travel., • Perform Basic preventive maintenance on equipment operated., • Demonstrate Working knowledge of manufacturing quality processes and principles, • Solve practical problems with a variety of variables in a fast-paced environment., • Keep work area and equipment clean, organized, and safe. Perform and maintain 5s standards to the highest level., • Perform other tasks of equal or lesser skill as required., • Share and accept knowledge and feedback with peers in support of growth and development of inclusive team environment., • 2+ years Machine building or tool-room experience preferred., • Able to calculate mathematical figures and amounts., • Must have thorough knowledge of precision measuring equipment, shop math, and trig., • Not required but beneficial: Experience with Trak machine tools, SMX, RMX, SLX, RMX CNC controls. Pneumatics, hydraulics, robotics, Solidworks, CAD., • Willing to train if candidate possesses strong adjacent skills or mechanical knowledge., • Use hands to finger, handle, or feel and reach with hands and arms., • Frequently required to stand and sit., • Occasionally required to walk and talk or hear., • Frequently lifts and/or moves up to 30 pounds., • High School Diploma, GED, apprenticeship, or equivalent preferred., • Experience with aerospace tooling and fasteners. The position includes competitive wages and a comprehensive benefits package available day one of hire, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. The salary range for this position is $23.86 to $40.57. , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email , Howmet Fastening Systems (HFS) is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment.

Engineering Manager Needed For Leading Manufacturing Company This Jobot Job is hosted by: Kevin Finlay Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $120,000 - $150,000 per year A bit about us: My client is a leading manufacturing company who is looking to add an Engineering Manager to their team. This role is critical in driving innovation, optimizing production processes, and ensuring the highest product quality standards. The ideal candidate will have a robust engineering background, extensive experience in metal forming processes, and proven leadership abilities to guide a dynamic team in a fast-paced manufacturing environment. Why join us? Benefits: · Competitive salary with performance-linked bonuses. · Comprehensive health, dental, and vision benefits package. · 401(k) retirement plan with company matching contributions. · Opportunities for professional development and career advancement within a growing organization. · Flexible working environment that promotes work-life balance. Job Details Key Responsibilities: · Directly supervise and mentor a diverse team of engineers and technical staff, encouraging professional development and fostering a collaborative culture that promotes innovation. · Facilitate cross-departmental collaboration by working closely with production supervisors, quality assurance teams, and design engineers to streamline operations and enhance overall productivity. · Design, implement, and refine efficient manufacturing processes specifically for deep drawn stamping applications, focusing on maximizing throughput while minimizing scrap and rework. · Apply lean manufacturing principles, Kaizen events, and Six Sigma methodologies to identify and eliminate bottlenecks, increasing operational efficiency year over year. · Provide advanced technical support related to tooling design, material selection (e.g., various grades of steel, aluminum, and specialty alloys), and stamping operations to uphold engineering best practices. · Lead troubleshooting efforts for complex manufacturing issues, employing root cause analysis techniques to develop effective solutions that prevent recurrence. · Oversee multiple engineering projects from initial concept through to final implementation, ensuring projects meet established timelines and budgetary constraints while fulfilling customer requirements. Qualifications: · Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or a related engineering field (Master’s degree or relevant certifications preferred). · A minimum of 5 years of directly related experience in metal stamping, with specific expertise in deep drawn processes and high-volume production environments. · Demonstrated leadership skills, with proven success in managing teams in manufacturing settings and achieving key performance metrics. · Proficiency in CAD software (e.g., SolidWorks, AutoCAD) and engineering simulation tools for process design and analysis. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Growing Company! Long Term Stability! Leading Technology! This Jobot Job is hosted by: Lincoln Sprague Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $130,000 - $170,000 per year A bit about us: We are one of the leading manufacturers in Southern California, with a global presence as well. We've been experiencing growth year-over-year and have not stopped. With over 60 years in business, we've become a leader within various markets: Aerospace, Defense, space, and others. If you're looking for a company with the utmost stability and upward growth, please continue to read and apply! Why join us? • 60+ years of stability and reputation amongst the community, • Excellent benefits and long term profit sharing potential, • Massive opportunity to move up -- with over 5000 employees, we continue to promote from within, • Competitive pay + profit sharing Job Details Job Details: We are seeking a dynamic and innovative Product Engineer specializing in Flex Assemblies to join our cutting-edge engineering team. The successful candidate will be responsible for the design, development, and implementation of flex assemblies for a wide range of applications in aerospace and defense industries. This role requires an individual with a strong background in Mechanical Design, Connector Design, Flex PCB Design, and Systems Design. The ideal candidate will have a deep understanding of the Mil-STD standards and a proven track record in managing complex engineering projects from conception to completion. Responsibilities: 1. Lead the design and development of flex assemblies for aerospace and defense applications, ensuring compliance with Mil-STD standards and customer requirements., 2. Perform detailed mechanical design work including 3D modeling, analysis, and validation of design specifications., 3. Design and develop connectors and flex PCBs, ensuring optimal performance, reliability, and cost-effectiveness., 4. Work closely with cross-functional teams to integrate flex assemblies into larger systems and resolve any design or performance issues., 5. Oversee the entire product lifecycle, from initial concept and design through to manufacturing, testing, and post-production support., 6. Conduct regular design reviews and provide expert technical guidance to junior engineers and other team members., 7. Stay abreast of the latest developments in the field of flex assemblies, and leverage this knowledge to drive continuous improvement in our products and processes., 8. Collaborate with suppliers and other external partners to ensure the successful implementation of flex assemblies in our products., 9. Prepare detailed technical documentation including design specifications, test plans, and user manuals. Qualifications: 1. Bachelor's degree in Mechanical Engineering, Electrical Engineering, or a related field., 2. A minimum of 5 years of experience in product engineering, with a strong focus on flex assemblies., 3. Proven expertise in Mechanical Design, Connector Design, Flex PCB Design, and Systems Design., 4. Solid understanding of Mil-STD standards and their application in the design and development of aerospace and defense products., 5. Strong 3D modeling skills, with proficiency in CAD software such as AutoCAD or SolidWorks., 6. Excellent problem-solving skills, with the ability to troubleshoot complex design and performance issues., 7. Strong project management skills, with the ability to manage multiple projects simultaneously and meet tight deadlines., 8. Excellent communication and teamwork skills, with the ability to collaborate effectively with cross-functional teams., 9. Familiarity with manufacturing processes and quality control standards in the aerospace and defense industries., 10. Continuous learner, staying updated with the latest industry trends and advancements. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Application close date: Applications will be accepted on an ongoing basis until the requisition is closed. At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We're working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion. Join our team of problem solvers as we add new chapters to the history of spaceflight! This role is part of Advanced Concepts and Enterprise Engineering (ACE), supporting Blue Origin's mission of millions of people living and working in space for the benefit of Earth. The team fosters innovation and drives engineering workflows of the future, shared solutions and standards, simplicity and lower costs, and manufacturable design. We invite you to be a part of our Space Resources Program. This initiative is at the forefront of developing In-Situ Resource Utilization (ISRU) technologies, destined for the Moon and beyond. If you're passionate about our mission and are looking to make a meaningful contribution, you might just be the ideal candidate to join our innovative, and forward-thinking team. As a Hardware Integration Engineer III focused on Integration & Assembly, you will lead how we design and build complex mechanical assemblies, from early prototyping and build strategy through technology demonstration, mission deployment, and fullrate production. You will define assembly plans, tooling, and inspection strategies that make builds simple, reliable, and costeffective. You will work handson with machining, waterjet, laser, and EDM processes to bridge design intent and production reality, ensuring our hardware is built safely, correctly, and efficiently the first time and every time. Responsibilities • Own endtoend assembly planning for complex mechanical and electromechanical hardware including maintaining the environment, including build sequence, station layout, takt/cycle time targets, and integration workflows., • Design and improve assembly steps, fixtures, tools, and line layouts to optimize ergonomics, safety, throughput, and rightfirsttime quality., • Develop clear, unambiguous work instructions, visual aids, and standard work packages for technicians and assemblers., • Define tolerances, datum schemes, and inspection plans; perform tolerance stackups and validate that parts, assemblies, and processes meet requirements., • Collaborate with design engineering to select appropriate manufacturing processes (machining, waterjet, laser, EDM, etc.) and drive Design for Manufacturability and Assembly (DFM/DFA) into new and existing designs., • Partner with internal and external suppliers to develop, qualify, and document manufacturing processes, including process capability, control plans, and acceptance criteria., • Lead structured rootcause analysis and corrective action (e.g., 8D, Fishbone, 5Why) to resolve production issues and nonconformances; drive systemic fixes that improve yield, quality, and cycle time., • Analyze build data and metrics to identify constraints, reduce variability, and increase throughput; implement changes using a datadriven approach., • Ensure configuration control of tooling, work instructions, and assembly processes in coordination with Design, Quality, and Configuration Management., • Support build readiness and launch of new products and major design changes, including process development, firstarticle builds, and manufacturing validations., • Mentor junior engineers and collaborate across disciplines (Design, Quality, Supply Chain, Test) to ensure safe, efficient, and repeatable production., • Work closely with Shipping/Receiving and Inventory teams to ensure parts are properly received, inspected, cleaned, kitted, and staged to support build plans and minimize line shortages or delays., • Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering, Aerospace Engineering, or related field., • 5+ years of experience in manufacturing engineering supporting integration and/or assembly of complex mechanical or electromechanical hardware., • Demonstrated experience planning and executing assembly processes, including defining build sequences, fixtures/tooling, and detailed work instructions., • Strong DFM/DFA skills and proficiency with GD&T (ASME Y14.5) and tolerance analysis for multicomponent assemblies., • Handson experience with machining, waterjet, laser, and EDM processes, including how process capabilities influence tolerances, fixturing, and inspection., • Proficiency with a 3D CAD system (e.g., NX, Creo, SolidWorks) for designing tooling, fixtures, and simple components., • Familiarity with CAM and ERP/MRP systems to support routing, BOM structure, work order creation, and build planning., • Proven track record of driving manufacturing improvements (yield, cycle time, cost, or quality) using data and structured problem solving., • Experience in aerospace, spaceflight, or other highreliability, highly regulated industries (e.g., medical devices, defense, nuclear)., • Experience taking hardware from development/prototype builds through rate production, including process characterization and production readiness., • Background with hightemperature and nontraditional materials such as ceramics; refractory metals (tungsten, molybdenum, tantalum, niobium); and highpurity metals., • Knowledge of joining and processing methods for these materials (e.g., brazing, diffusion bonding, laser welding, vacuum or inertatmosphere processes, contamination/cleanliness control)., • Experience with PLM, MES, and digital manufacturing tools (e.g., PTC Windchill, digital work instructions, electronic signoff)., • Familiarity with PFMEA, control plans, SPC, GR&R, and other advanced manufacturing quality tools., • Demonstrated ability to simplify and communicate complex build concepts and data to a wide range of audiences, including technicians and leadership. Other site ranges may differ Culture Statement Don't meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At Blue Origin, we are dedicated to building an authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every desired qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Export Control Regulations Applicants for employment at Blue Origin must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S.as a refugee or granted asylum. Background Check * Required for all positions: Blue's Standard Background Check * Required for Certain Job Profiles: Defense Biometric Identification System (DBIDS) background check if at any time the role requires one to be on a military installation * Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. * Required for certain Job Profiles: Ability to obtain and maintain Merchant Mariner Credential, which includes pre-employment and random drug testing as well as DOT physical Benefits * Benefits include: Medical, dental, vision, basic and supplemental life insurance, paid parental leave, short and long-term disability, 401(k) with a company match of up to 5%, and an Education Support Program. * Stock Options for all regular employees (working at least 20 hours/week) * Paid Time Off: Up to four (4) weeks per year based on weekly scheduled hours, and up to 14 company-paid holidays. * Dependent on role type and job level, employees may be eligible for benefits and bonuses based on the company's intent to reward individual contributions and enable them to share in the company's results, or other factors at the company's sole discretion. Bonus amounts and eligibility are not guaranteed and subject to change and cancellation. Please check with your recruiter for more details. Equal Employment Opportunity Blue Origin is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified and dedicated work force. Blue Origin hires and promotes people on the basis of their qualifications, performance, and abilities. We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork. We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law. Blue Origin will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state, and local laws, including the Washington Fair Chance Act, the California Fair Chance Act, the Los Angeles Fair Chance in Hiring Ordinance, and other applicable laws. For more information on "Know Your Rights," please see ___. Affirmative Action and Disability Accommodation Applicants wishing to receive information on Blue Origin's Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact us at___. Please note this is a publicly managed inbox. Please do not include any personal medical information in your request.

Application close date: Applications will be accepted on an ongoing basis until the requisition is closed. At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We're working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion. Join our team of problem solvers as we add new chapters to the history of spaceflight! The TeraWave program is developing next-generation optical telescopes for space-based laser communication terminals (lasercom) operating in medium Earth orbit (MEO). These precision optical systems enable high-throughput data relay at rates exceeding 100 Gbps - forming the backbone of future space communication architectures. Our telescopes must meet fast paced requirements for wavefront error (WFE), line-of-sight (LOS) stability, and pointing accuracy while surviving launch loads and the orbital thermal environment. We are scaling from prototype to production-rate manufacturing of flight-qualified optical telescope assemblies - and we need a Manufacturing Engineer who can own the tooling, fixtures, and ground support equipment that make that production line possible. Special Mentions: * Travel expectations: Up to 20% (supplier sites, test facilities, launch integration) As the Manufacturing Engineer - Tooling & GSE, you will be the technical owner of all production tooling, alignment fixtures, handling equipment, and ground support equipment used to assemble, integrate, align, test, and transport precision optical telescope assemblies. You will bridge the gap between design engineering and the production floor - translating optical and opto-mechanical designs into robust, repeatable, and technician-executable manufacturing processes. This is a hands-on, production-focused role. You will design fixtures, prove them out on the floor, iterate based on real build data, and ensure every tool and process meets the precision and cleanliness demands of spaceflight optical hardware. Tooling & Fixture Design • Design, develop, and qualify precision production tooling, including alignment nests, bondline gauges, shim kits, potting fixtures, optical handling fixtures, integration jigs, and custom assembly aids for optical telescope assemblies, • Own the full lifecycle of tooling - from concept through design, fabrication, first-article tryout, iteration, qualification, and production release, • Ensure all tooling meets requirements for positional accuracy, repeatability, thermal stability, contamination compatibility, and operator ergonomics, • Apply kinematic and semi-kinematic design principles to ensure deterministic, repeatable positioning of optical elements Ground Support Equipment (GSE) • Design and qualify all mechanical GSE for handling, transport, storage, and environmental testing of optical telescope assemblies and subassemblies, • Develop GSE for vibration, shock, and thermal vacuum (TVAC) test campaigns - including test fixtures, adapter plates, thermal straps, and transport containers, • Design handling GSE that protects sensitive optical surfaces, coatings, and precision interfaces during all phases of production and test, • Maintain a GSE inventory, configuration control, and calibration/maintenance schedule for all production tooling and equipment, • Lead Design for Manufacturing (DFM) and Design for Assembly (DFA) reviews with the optical, mechanical, and systems design teams - providing actionable feedback to improve manufacturability, reduce cycle time, and minimize assembly risk, • Author and maintain manufacturing process plans, routers, travelers, and detailed work instructions for all optical telescope assembly and integration operations, • Develop and implement poka-yoke (error-proofing) strategies to minimize operator-dependent variation in precision assembly steps, • Define and optimize assembly sequences to minimize handling of sensitive optical components and reduce contamination risk, • Implement and monitor Statistical Process Control (SPC) for critical manufacturing parameters, tracking process capability indices (Cpk) against defined targets, • Support Measurement System Analysis (MSA) and Gage Repeatability & Reproducibility (GR&R) campaigns to validate measurement systems used in production, • Lead or contribute to Process FMEA activities, identifying and mitigating manufacturing risks before production release, • Support Production Part Approval Process (PPAP) and First Article Inspection (FAI) activities, • Conduct root-cause investigations and corrective actions (RCCA) for tooling-related nonconformances, yield issues, or production escapes, • Ensure all tooling, GSE, and processes comply with AS9100, company quality standards, and applicable NASA/DoD workmanship requirements, • Lead rapid prototyping of tooling and fixtures - leveraging 3D printing, quick-turn machining, and bench-level tryouts to accelerate design iteration, • Create closed-loop feedback between prototype builds, production data, and tooling design - continuously improving cycle time, yield, and repeatability, • Drive Lean manufacturing and continuous improvement initiatives on the production floor, • Create and maintain detailed engineering drawings (per ASME Y14.5 GD&T standards) for all tooling and GSE, • Document procedures, inspection criteria, and acceptance requirements for all tooling and GSE, • Ensure compliance with contamination control and cleanroom protocols (e.g., IEST-STD-CC1246, NASA-STD-6016) applicable to precision optical hardware, • Maintain tooling and GSE configuration under PLM/PDM revision control, • Bachelor's degree (or higher) in Mechanical Engineering, Manufacturing Engineering, Aerospace Engineering, Industrial Engineering, or a closely related field, • 7+ years in a production-focused manufacturing engineering role involving tooling design, fixture development, and/or GSE design for precision hardware systems (aerospace, defense, space, medical devices, or equivalent high-reliability industry), • Demonstrated hands-on experience designing, fabricating, and qualifying precision fixtures, alignment tooling, handling GSE, and/or inspection gages - not just CAD modeling, but floor-level prove-out and iteration, • Proven ability to lead DFM/DFA reviews with design teams and translate design intent into manufacturable, repeatable production processes, • Strong command of geometric dimensioning and tolerancing per ASME Y14.5; experience performing or leading tolerance stack-up analyses (1D and/or 3D) for precision mechanical assemblies, • Expert proficiency in at least one major CAD platform: PTC Creo (preferred), NX, or SolidWorks - including part/assembly modeling, drawing generation, and basic simulation, • Familiarity with AS9100 / ISO 9001 quality management systems; working knowledge of SPC, GR&R, and process capability concepts, • Hands-on familiarity with common manufacturing processes - machining (CNC mill/lathe), sheet metal, bonding/adhesives, fastening, precision cleaning, and mechanical assembly, • Experience handling, assembling, or integrating sensitive optical components - lenses, mirrors, prisms, optical coatings, fiber-coupled assemblies. Understanding of contamination control, coating damage prevention, and precision optical alignment constraints, • Experience standing up a new production line or transitioning prototype-to-production for space-qualified hardware; familiarity with space qualification processes (protoflight, qualification, acceptance), • Experience designing fixtures or GSE for vibration, shock, and thermal vacuum (TVAC) test campaigns; understanding of test fixture design constraints (e.g., resonance avoidance, thermal isolation, mass budgets), • Direct experience leading or contributing to Process FMEA and PPAP in an aerospace or high-reliability production environment, • Hands-on experience implementing SPC control charts (X-bar/R, I-MR) and driving process capability improvements toward Cpk targets, • Experience working in Class 100K or better cleanroom environments; familiarity with IEST-STD-CC1246, NASA-STD-6016, or equivalent contamination control standards, • Experience with product lifecycle management tools (e.g., PTC Windchill, Siemens Teamcenter, or equivalent) for configuration control of tooling and GSE, • Knowledge of vacuum-compatible materials and outgassing requirements (e.g., ASTM E595) for tooling and GSE used in TVAC or flight-adjacent applications, • Lean manufacturing certification (Green Belt or higher) or demonstrated experience applying Lean/Six Sigma tools (DMAIC, 5S, value stream mapping) in a production environment, • Experience with additive manufacturing (FDM, SLA, SLS) for rapid tooling prototyping and bench-level prove-out Other site ranges may differ Culture Statement Don't meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At Blue Origin, we are dedicated to building an authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every desired qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Export Control Regulations Applicants for employment at Blue Origin must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S.as a refugee or granted asylum. Background Check * Required for all positions: Blue's Standard Background Check * Required for Certain Job Profiles: Defense Biometric Identification System (DBIDS) background check if at any time the role requires one to be on a military installation * Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. * Required for certain Job Profiles: Ability to obtain and maintain Merchant Mariner Credential, which includes pre-employment and random drug testing as well as DOT physical Benefits * Benefits include: Medical, dental, vision, basic and supplemental life insurance, paid parental leave, short and long-term disability, 401(k) with a company match of up to 5%, and an Education Support Program. * Stock Options for all regular employees (working at least 20 hours/week) * Paid Time Off: Up to four (4) weeks per year based on weekly scheduled hours, and up to 14 company-paid holidays. * Dependent on role type and job level, employees may be eligible for benefits and bonuses based on the company's intent to reward individual contributions and enable them to share in the company's results, or other factors at the company's sole discretion. Bonus amounts and eligibility are not guaranteed and subject to change and cancellation. Please check with your recruiter for more details. Equal Employment Opportunity Blue Origin is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified and dedicated work force. Blue Origin hires and promotes people on the basis of their qualifications, performance, and abilities. We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork. We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law. Blue Origin will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state, and local laws, including the Washington Fair Chance Act, the California Fair Chance Act, the Los Angeles Fair Chance in Hiring Ordinance, and other applicable laws. For more information on "Know Your Rights," please see ___. Affirmative Action and Disability Accommodation Applicants wishing to receive information on Blue Origin's Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact us at___. Please note this is a publicly managed inbox. Please do not include any personal medical information in your request.

Position Summary: We are seeking a Manufacturing and Assembly Engineer to lead and optimize our end-to-end manufacturing and assembly operations. This role will focus on the development, improvement, and scaling of complex mechanical and/or electromechanical assembly processes, ensuring product quality, operational efficiency, and cost-effectiveness. The ideal candidate will act as a technical expert, project leader, and mentor within the engineering team. Key Responsibilities: Required: • Bachelor's degree in Mechanical, Manufacturing, Industrial Engineering, or a related field., • Experience in manufacturing and assembly engineering roles., • Demonstrated expertise in developing and optimizing complex mechanical or electromechanical assembly processes., • Strong understanding of lean manufacturing, Six Sigma tools, and process validation methodologies., • Proficiency with CAD, SOLIDWORKS, ERP, and MRP (Mapics preferred) systems., • Experience in leading cross-functional teams and managing large-scale manufacturing projects., • Experience with automation, robotics, and Industry 4.0 technologies., • Prior experience in highly regulated industries such as medical, aerospace, or automotive. Work Location:On-Site Disclaimer: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the position. The duties and responsibilities described are not a comprehensive list and additional tasks may be assigned to theemployee from time to time. The job description does not constitute a contract of employment and the Company may exercise its employment-at-will rights at any time. The above lists all of the essential functions, education, experience, skills and abilities required. Employees must also demonstrate good interpersonal skills, attitude and professionalism, acceptable attendance and work behaviors. NHBB is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Due to compliance with U.S. export control laws and regulations, candidate must be a U.S. citizen, U.S. permanent resident, or have asylum or refugee status in the U.S. Pay Range:$75,000-$100,000 DOE #nhb123 #NHBBC New Hampshire Ball Bearings, Inc. (NHBB) is a leading manufacturer of precision bearings and complex bearing assemblies for the aerospace, defense, medical, dental, and high technology markets. Founded in Peterborough, NH in 1946, our almost 8 decades of success are rooted in our commitment to the safety, health and wellness of our employees, and partnerships with our customers, suppliers and the communities that surround us. NHBB's Precision Division is based in the western corner of the San Fernando Valley surrounded by the Santa Susanna Mountains to the west and Los Angeles to the east. We are always on the lookout for outstanding individuals with a strong work ethic, creative spirit and positive attitude. If you have what it takes to be successful and our NHBB Values speak to you, apply now.

Job Summary: Responsible for providing technical assessments and recommendations related to production capability, development, implementation and review of processes and tooling design, and partnering with cross-functional teams to lead projects to successful completion. Assists with onboarding of new team members, and oversees development of presentation materials for sharing with internal and external stakeholders. Essential Duties and Responsibilities: • Design for Manufacturability Analysis of components and bearings, and partner with stakeholders to design solutions for customers, • Develop and implement production and tooling methodologies and process for bearing assemblies and components, • Develop and release manufacturing plans and detailed work instructions from 2D drawing-based engineering and from 3D model-based engineering, using both 2D and 3D model-based work instructions with graphics while overseeing plan and build optimization, • Communicate timelines for program development/review and change requests, and proactively manage task execution to ensure on time completion and delivery of high quality manufacturing engineering products and support, • Lead assigned Capital Expenditure (CapEx) projects from development and justification analysis through project completion, • Resolve escalated technical issues, prioritizing impact to performance, cost or schedule., • Participate in Kaizen events, and implement LEAN principles and technologies, • Leads small projects, partnering with employees at all levels to ensure deadlines and objectives are met. Oversees development of presentation data and materials and communicates professionally to stakeholders., • Collaborates with cross-functional teams to learn and share best practices. Maintains an understanding of industry standards and trends to improve processes within primary work area., • Ensures compliance with all safety and environmental rules and regulations, keeping an organized work area and reporting concerns to leadership or the Safety team. Job Skills & Abilities: • Relevant technical and computer skills (AutoCAD/SolidWorks, MS Access, and Excel., • Proficient at blueprint reading, engineering drawing interpretation and tolerancing, • Ability to develop Capital Justification Analysis for Return On Investment (ROI) and usage, • Highly self-motivated with demonstrated problem solving skills., • Interpersonal and communication skills; Ability to partner effectively with employees at all levels, • Strong attention to detail, • Bachelors' Degree in Engineering, • May include: standing, walking, bending, reaching, grabbing, twisting, carrying, pushing and pulling. NHBB is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Due to compliance with U.S. export control laws and regulations, candidate must be a U.S. citizen, U.S. permanent resident, or have asylum or refugee status in the U.S. Pay Range:$72k to $80k DOE Benefits: • 401(k), • Dental insurance, • Employee assistance program, • Flexible spending account, • Health insurance, • Life insurance, • Paid time off, • Tuition reimbursement, • Vision insurance #nhb123 #NHBBC New Hampshire Ball Bearings, Inc. (NHBB) is a leading manufacturer of precision bearings and complex bearing assemblies for the aerospace, defense, medical, dental, and high technology markets. Founded in Peterborough, NH in 1946, our almost 8 decades of success are rooted in our commitment to the safety, health and wellness of our employees, and partnerships with our customers, suppliers and the communities that surround us. NHBB's Precision Division is based in the western corner of the San Fernando Valley surrounded by the Santa Susanna Mountains to the west and Los Angeles to the east. We are always on the lookout for outstanding individuals with a strong work ethic, creative spirit and positive attitude. If you have what it takes to be successful and our NHBB Values speak to you, apply now.

Title About the Organization Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms. EOE Statement Applied Aerospace and Defense is an equal opportunity employer. Description General Summary: The Engineering Intern assists the Manufacturing Engineering Team with production projects, continuous improvement initiatives, and capital justifications. The position provides hands-on engineering experience in an Aerospace facility. Essential Duties & Responsibilities: • Reads and interprets blueprints, symbols and geometric tolerances based on military and commercial specifications., • Generated drawings from models, • Editorial changes on tool sheet or setup instructions, • Create work instructions on jobs or special processes, • Special projects, such as implementation of Zoller software, • Submission on flight safety documents, • Fixture designs, • Junior/Senior Mechanical Engineer or Manufacturing Engineer, • Thorough knowledge of Microsoft Windows and Microsoft Office, • Working knowledge of AutoCAD or SolidWorks, preferred, • Extremely well-organized with superior attention to detail, • Excellent written and verbal communication skills

Basic skills or knowledge in Solidworks.

We are seeking a Senior Electrical Engineer to join an advanced autonomy-focused engineering team developing next-generation autonomous maritime systems. This role will focus on the design, integration, testing, and deployment of mission-critical electrical subsystems supporting autonomous underwater and surface platforms. You will work closely with cross-functional teams spanning software, firmware, mechanical, and systems engineering to develop highly reliable systems operating in demanding real-world environments. Responsibilities • Develop electrical schematics, system interconnects, and wire harnesses, • Design and integrate sensors, power systems, and networking interfaces, • Support subsystem integration, testing, troubleshooting, and validation, • Conduct design reviews and system verification activities, • Collaborate across engineering disciplines to deliver fully functional products, • Support development of ruggedized, fieldable autonomous systems Desired Background • 8+ years of experience in electrical engineering or system integration, • Strong analog and digital electronics knowledge, • Experience with electrical schematics, wiring harnesses, and PCB systems, • Familiarity with interfaces such as Ethernet, CAN, I2C, USB, or MODBUS, • Experience using oscilloscopes, DMMs, logic analyzers, and test equipment, • Background in autonomous systems, robotics, maritime, aerospace, or defense environments preferred, • Experience with CAD and PCB design tools such as Altium, NX, or SolidWorks Additional Information • Fast-paced, highly technical environment, • Opportunity to work on cutting-edge autonomous platforms at scale, • U.S. work authorization required, • Ability to obtain and maintain a U.S. security clearance preferred If interested, please apply directly or reach out for additional information.

Proficiency with SolidWorks or similar CAD software, including assemblies, tolerancing, and CNC-ready design.

Own the structural design of a first-of-its-kind aircraft and play a defining role in bringing hybrid-electric aviation to market. This is a rare opportunity to step into a senior, high-impact position where your work directly contributes to one of the most important transitions in modern aerospace — reducing emissions without compromising performance. You’ll operate at the forefront of innovation, with real ownership, visible impact, and a clear path to technical leadership as the company scales. The Opportunity An emerging aerospace company is developing hybrid-electric propulsion systems designed to transform existing aircraft into significantly more fuel-efficient platforms — offering a practical, near-term path to sustainable aviation. With proven flight hours, strong market demand, and fresh funding secured, the business is now entering a critical phase: certification and scale-up. They are seeking a Senior / Principal Mechanical Engineer to take ownership of structural engineering across a flagship aircraft program. This is not a narrow, siloed role. You’ll be the go-to expert for structures — working across design, analysis, testing, and certification — with direct exposure to executive leadership and the opportunity to build and lead a team over time. What You’ll Be Doing • Own structural design and analysis for aircraft modifications, from concept through certification, • Lead stress analysis (hand calculations and FEA) and produce substantiation reports for regulatory approval, • Design and release components including engine mounts, landing gear structures, battery enclosures, and airframe modifications, • Work hands-on with prototypes, supporting build, integration, and flight test activities, • Collaborate closely with multidisciplinary teams across propulsion, systems, and manufacturing, • Engage directly with suppliers on component development, procurement, and validation, • Mentor junior engineers and help shape the future structures team What They’re Looking For • 5–10+ years of experience in mechanical or structural engineering within aerospace, • Full lifecycle experience: design (CAD), analysis, and real-world implementation, • Strong background in fixed-wing aircraft structures (e.g., mounts, cowls, landing gear, airframe components), • Experience with FEA and hand calculations for metallic structures, • Proficiency in 3D CAD (SolidWorks or similar) and engineering drawing standards, • Exposure to certification processes (FAA Part 23 or similar) is highly advantageous, • Comfortable operating in a hands-on, fast-paced environment with high ownership Why This Role Stands Out • Own a critical technical domain at a pivotal moment — not just contribute, but lead, • Work on a real, certifiable product already proven in flight, not a concept or long-term bet, • Operate across the full engineering lifecycle, from early design through to flight testing and certification, • Join a small, high-calibre team where your work is visible and directly shapes outcomes, • Clear pathway to leadership, with scope to build and scale a team under you, • Be part of a mission with real-world impact, accelerating the transition to sustainable aviation

Job Description Job description: As a Product Development Engineer at Elco Lighting, you will play a pivotal role in the entire product lifecycle, from concept generation to final production. You will collaborate with cross-functional teams to design, develop, and test innovative lighting solutions that meet the evolving needs of our customers work. • Responsibilities:*, • Lighting Design & Development:*, • Conceptualize, design, and develop innovative lighting products, including LED fixtures, controls, and systems, • Apply knowledge of photometry, optics, and thermal management to optimize lighting performance., • Engineering & Prototyping:*, • Create detailed 3D models and technical drawings using CAD software (e.g., SolidWorks, AutoCAD)., • Build and test prototypes to validate designs, ensuring functionality, durability, and safety., • Conduct thorough performance testing, including photometric measurements, thermal analysis, and electrical testing., • Oversee UL, ETL, and other product safety testing and certifications., • Analyze test results and implement design modifications to improve product performance., • Product Lifecycle Management:*, • Manage the product development process from concept to launch, adhering to project timelines and budgets., • Collaborate with manufacturing and quality assurance teams to ensure seamless production and product quality., • Maintain accurate documentation of designs, test results, and specifications., • Ensure products meet all relevant regulatory requirements such as UL, CE, and DLC., • Qualifications:*, • Bachelor's degree in Electrical Engineering, Mechanical Engineering, or a related field., • Proven experience in product development, preferably in the lighting industry., • Proficiency in CAD software (SolidWorks preferred)., • Strong understanding of electrical and mechanical engineering principles., • Experience with prototyping and testing methodologies., • Knowledge of lighting industry standards and regulations is a plus., • Pay Range: *$30 - $45 per hour Job Type: Full-time Company DescriptionThe Leading Choice - Both customers and competitors alike see ELCO as a leader in luminaire manufacturing.The Leading Choice - Both customers and competitors alike see ELCO as a leader in luminaire manufacturing.

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Structures and Mechanisms team is responsible for the full design, build, and test lifecycle of Terran R's integrated structures and flight mechanisms. Whether you're working on highly iterative mechanisms that move or tight-margin structures that shouldn't, you'll get hands-on hardware ownership and see the rocket coming to life on the factory floor. Both teams fall under one department, sharing design principles, tools, and an integrated approach that provides a comprehensive view of Terran R. Team members work on multiple parts, not just within a single subsystem, and are empowered to make decisions that directly impact flight hardware. Beyond first flight, you'll play a critical role in refining for manufacturability and speed. About the Role: The scope of work encompasses a full design cycle, including conceptualization, design, analysis, manufacturing and testing for primary and secondary structures related to Thrust Structure, Propellant Tanks, Interstage or Fairing, to name a few. You will need to think creatively and leverage innovation to reduce mass, parts, processes and tooling required. Your responsibilities will include, but not be limited to the following: • Innovative conceptualization of structural load path, design for complex structures and adjacent system packaging., • Review of static & dynamic load inputs, material properties & test as well as structural systems & subsystems requirements., • Analysis and sizing of flight structures to ensure timely design reviews and drawing release., • Develop and support hardware test campaigns, including test integration, operation and result evaluation. On a weekly basis, you will be designing flight components for our upcoming Terran R vehicle using NX/TeamCenter, performing analysis using Nastran, ANSYS and/or hand calculations, creating and releasing drawings as well as supporting fabrication of your components. You will own your design from requirements to production. You will also use your strong organizational skills to properly document your work and present your recommendations when decisions are needed. About You: • 8+ years of experience in a design engineering role., • Bachelor's degree in engineering or related technical discipline, • Significant experience with industry-standard CAD packages such as NX, Creo, or Solidworks, • Working knowledge of structural analysis (hand calculation, Finite Elements Methods and industry tools) and test, • Fundamental knowledge of structures strength, stability and fatigue failure mechanisms., • Fundamental knowledge of additive and traditional manufacturing processes, • 8+ years of mechanical or structural design & analysis experience., • Extensive experience with NX/TeamCenter., • Expertise using Nastran and ANSYS., • Experience with GD&T and drafting. We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. At Relativity Space, we are committed to transparency and fairness in our compensation practices. Actual compensation will be determined based on experience, qualifications, and other job-related factors. Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$184,500—$225,500 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at .

Job DescriptionSalary: $19.00-$22.00 DOE Position Title: Mechanical Drafter Reports to: Manufacturing Engineering Manager Position Description: As a key member of our Team, you will be responsible for creating and modifying SolidWorks models, assemblies, and drawings related to mechanical assemblies and manufacturing processes. As well as creating and modifying SOP documents. Taurus Engineering has been in Long Beach for over 50 years and provides submersible cables and connectors for oil companies all over the world. Essential Duties and Responsibilities: Create and modify SolidWorks models, assemblies, and drawings. Create and modify Standard Operating Procedures. Communicate effectively with the Engineering and Production departments. Provide timely updates for drawing completion and workload. Other duties may be assigned. Supervision Responsibilities: None Organizational Responsibilities: Work interactively with Design Engineering and Production Departments. Manage workload effectively. Qualification Requirements: Certain qualifications must be met for the successful performance of the essential functions of this position. The requirements listed below outline the knowledge, skills, and abilities required for the satisfactory performance of this position. Accommodation will be made to aid qualified individuals with disabilities for they to successfully perform the essential requirements. Minimum Qualifications unique to this position: Skilled at using SolidWorks within a mechanical design and assembly environment. Strong mechanical aptitude and experience with mechanical assemblies. Ability to create, read, and understand Engineering drawings. Overall Qualifications for this position: Versatility, flexibility, and willingness to work within constantly changing priorities. Strong organizational, problem-solving, and analytical skills; able to manage priorities and workflow. Commitment to excellence and high standards. Able to communicate with all levels of the organization, both verbally and in writing. Have a positive attitude and a desire to learn. Preferred Education and/or Experience: Experience documenting, creating, and modifying Standard Operating Procedures related to mechanical assemblies. Associates or BS degree in engineering with a focus on mechanical engineering. Experience with 3D slicing software. Experience with basic machine shop and hand tools, i.e., drill press, mini-lathe, bandsaw, etc. Travel: Limited travel may be required. Computer Skills: SolidWorks, with a focus on mechanical assemblies. Proficient in Microsoft Word, Excel, and Outlook. Safety and Housekeeping: Adhere to the companys safety and housekeeping standards and procedures. Physical Demands: The physical demands describe what the employee may be exposed to during the performance of this duty. Accommodations will be made to aid individuals with disabilities so that they may successfully perform the functions below: Regularly required to sit and walk. Occasionally required to lift and/or move up to 30 lbs. Work Environment: The work environment describes what the employee will be exposed to during the performance of the duty. Frequent exposure to moving mechanical parts Moderate to loud noise level Office and Warehouse environment Compensation $19.00-$22.00 DOE

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. The Role: Join Hadrian’s Special Projects division as a key technical contributor at the forefront of advanced manufacturing. Reporting into the special projects team, you will operate as a distributed asset across our factory network, working alongside leadership, automation, factory development engineering, and operations teams. This foundational role is centered on the design, development, and deployment of precision tooling and simulation systems that support scalable, high-performance manufacturing for large parts and assemblies. Your work will help shape the capabilities of our future factories through hands-on technical execution and cross-functional collaboration. What You’ll Do: * Develop and refine low-, mid-, and high-fidelity simulations that align with factory build and optimization goals. * Convert ambiguous layout concepts into executable DES and 3D simulations. * Collaborate with engineering, operations, and leadership to deliver data-driven, actionable simulation insights. * Maintain and enhance the simulation toolchain to support long-term scalability and usability. * Create and manage a robust library of parametric and reusable simulation assets. What We’re Looking For: * Strong systems thinking with a balance between rapid prototyping and sustainable platform design. * Demonstrated experience in simulation development using Python (OOP) and Visual Components or similar tools. * Ability to distill technical results into clear insights for both technical and non-technical audiences. * Self-driven, capable of taking initiatives from concept to functional MVP with measurable impact. * Familiarity with kinematics, PLC interfaces, and discrete event simulation methodologies. What Will Set You Apart: * Ability to rapidly build prototypes while thoughtfully managing long-term codebase health. * Excellent cross-functional communication, with a talent for user-focused storytelling and iterative design. * Broad technical skill set, including debugging, plugin development (Python/C#), and data modeling. * Background in industrial engineering principles, including line balancing and ROI analysis. * Proficiency with Visual Components, CAD platforms (SolidWorks, NX), Siemens TeamCenter, and automated parametric asset creation. Compensation For this role, the target salary range is 160k-90k (actual range may vary based on experience). This is the lowest to highest salary we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. Benefits * Medical, dental, vision, and life insurance plans for employees * 401k * Relocation support may be provided for certain situations, based on business need. * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. The Role We are seeking a skilled and driven Mechanical Engineer to join Hadrian’s Factory Automation division, a team dedicated to building and scaling Hadrian’s core machining business. This role is focused on the design, development, and commissioning of automated robotic cells that support high-precision, scalable manufacturing. As part of this team, you will work directly with hardware engineers, software engineers, and robotics engineers to bring advanced production systems from concept to operation. You will help execute our Machining roadmap to scale Hadrian to be multi-factory across the US. We are looking to add a curious and self-motivated expert to join our already world class team. What You’ll Do * Lead the mechanical design for advanced automated manufacturing robotic cells, including end effector design, fixturing and cell layouts. * Install, commission and debug automation systems on the production floor. Diagnose and resolve mechanical system and hardware issues. * Develop standards, documentation, and procedures for scalable automation deployment. What We’re Looking For * Bachelor's degree in mechanical engineering, physics or related discipline. * Experience with CAD software, preferably SolidWorks * Experience designing and commissioning end of arm tooling and fixturing for industrial robotic applications * Experience designing and commissioning layouts and floor plans for robotic cells * Experience with material selection, finite element analysis, and payload analysis for heavy (500 kg) robotic applications * Strong skills in integrating sensors and pneumatic and mechanical components * Strong skills performing risk assessments in accordance with safety standards such as ISO 13849 or ANSI B11. * Demonstrated ability to troubleshoot complex systems using diagnostic tools and lead structured root cause analysis. * Excellent written and verbal communication skills. Compensation For this role, the target salary range is $130,000 - $220,000 (actual range may vary based on experience). This is the lowest to highest salary we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. Benefits * Medical, dental, vision, and life insurance plans for employees * 401k * Relocation support may be provided for certain situations, based on business need. * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job Description Rainmaker is pioneering a modern cloud seeding system to solve water scarcity and inclement weather problems. We develop and incorporate radar validation, weather-resistant UAS, numerical weather modeling, and sustainable cloud seeds into an effective precipitation enhancement solution. The Engineering team at Rainmaker works on our UAS, dispersion payload, and in-situ/remote sensing systems. If you are interested in working in an extremely innovative and fast paced environment, where your work directly makes an impact and difference in our operational system, this is a fantastic opportunity. What You'll Do * Collaborate with multidisciplinary teams to develop and refine aerodynamic designs for aviation vehicles operating in extreme weather conditions * Conduct computational fluid dynamics (CFD) simulations and analyses to assess aerodynamic performance and behavior * Design, optimize, and evaluate vehicle configurations for various deployment scenarios and endurance requirements * Contribute to wind tunnel testing and experimental data analysis to validate CFD predictions * Participate in the development and implementation of innovative aerodynamic solutions * Work closely with other engineering disciplines to ensure manufacturing viability of aerodynamic solutions and translate designs to working prototypes Required Qualifications * Bachelor's or Master's degree in Aerospace Engineering or a related field (Or 4+ years of experience as a substitute) * 2+ years of relevant experience in aerodynamics and aerospace engineering * Proficiency in computational fluid dynamics (CFD; Ansys Preferred) software and tools * Proficiency in CAD (Solidworks Preferred) * Experience in composite manufacturing techniques (Required) * Strong understanding of aerodynamics principles and concepts * Familiarity with aerodynamic design and analysis techniques for high loading and extreme weather applications * Solid programming skills (Python, MATLAB, etc.) for data analysis and modeling * Effective communication skills and the ability to work collaboratively in a team environment Rainmaker is an Equal Opportunity Employer; employment with Rainmaker is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Rainmaker participates in E-Verify. To learn more, including your rights and responsibilities, please visit E-Verify.gov.

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Structures and Mechanisms team is responsible for the full design, build, and test lifecycle of Terran R's integrated structures and flight mechanisms. Whether you're working on highly iterative mechanisms that move or tight-margin structures that shouldn't, you'll get hands-on hardware ownership and see the rocket coming to life on the factory floor. Both teams fall under one department, sharing design principles, tools, and an integrated approach that provides a comprehensive view of Terran R. Team members work on multiple parts, not just within a single subsystem, and are empowered to make decisions that directly impact flight hardware. Beyond first flight, you'll play a critical role in refining for manufacturability and speed. About the Role: The scope of work encompasses a full design cycle, including conceptualization, design, analysis, manufacturing and testing for primary and secondary structures related to Thrust Structure, Propellant Tanks, Interstage or Fairing, to name a few. You will need to think creatively and leverage innovation to reduce mass, parts, processes and tooling required. Your responsibilities will include, but not be limited to the following: • Innovative conceptualization of structural load path, design for complex structures and adjacent system packaging, • Review of static & dynamic load inputs, material properties & test as well as structural systems & subsystems requirements, • Analysis and sizing of flight structures to ensure timely design reviews and drawing release, • Develop and support hardware test campaigns, including test integration, operation and result evaluation On a weekly basis, you will be designing flight components for our upcoming Terran R vehicle using NX/TeamCenter, performing analysis using Nastran, ANSYS and/or hand calculations, creating and releasing drawings as well as supporting fabrication of your components. You will own your design from requirements to production. You will also use your strong organizational skills to properly document your work and present your recommendations when decisions are needed. About You: • 5+ years of experience in a design engineering role, • Bachelor's degree in Engineering or related technical discipline, • Experience with industry-standard CAD packages such as NX, Creo, or Solidworks, • Working knowledge of structural analysis (hand calculation, Finite Elements Methods and industry tools) and test, • 5+ years of mechanical or structural design & analysis experience, • Experience with NX/TeamCenter, • Experience using Nastran and ANSYS Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$132,000—$181,500 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at .

Join a stable and growing aerospace manufacturer as a hands-on Manufacturing Engineer where you’ll drive real impact on precision production, lead continuous improvement initiatives, and work with cutting-edge processes in a high-performance, re This Jobot Job is hosted by: Brendan Thomas Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $85,000 - $120,000 per year A bit about us: Shape the Future of Aerospace Manufacturing We are a well-established aerospace manufacturer seeking a hands-on Manufacturing Engineer to support and optimize high-precision production operations. This is an exciting opportunity to work in a regulated aerospace environment where your technical expertise directly impacts safety, quality, delivery, and cost performance. If you enjoy solving complex manufacturing challenges, improving processes, and collaborating across departments to bring products from concept to production — this role is for you. Why join us? Benefits & What We Offer • Competitive Compensation, • Comprehensive Medical Coverage with multiple PPO & HMO plan options, • 100% covered preventive care for in-network services, • Dental Insurance, • Vision Insurance, • 401(k) Retirement Plan (100% company match on the first 4% + Immediate vesting), • Company-Paid Life & AD&D Insurance, • Long-Term Disability Insurance, • Employee Assistance Program (EAP), • Optional Voluntary Benefits, • And much more! Job Details What You’ll Be Doing: • Develop and improve manufacturing processes for precision aerospace components, including cold heading, machining, thread rolling, heat treatment, finishing, and assembly, • Create and maintain SolidWorks 3D models and detailed 2D drawings to support tooling, fixtures, gauges, layouts, and production equipment, • Apply GD&T per ASME Y14.5 and ensure drawings meet aerospace standards and customer specifications, • Optimize workflow, space utilization, equipment layout, and workforce efficiency to improve throughput and reduce waste, • Provide hands-on technical support to resolve process, tooling, and equipment issues on the production floor, • Lead and support new product introductions, ensuring manufacturing readiness and operator training, • Drive continuous improvement initiatives focused on scrap reduction, cost control, quality enhancement, and machine productivity, • Develop and maintain manufacturing documentation including BOMs, routings, MOMs, standard work, cycle times, and capacity data, • Support aerospace compliance activities including First Article Inspections (AS9102), fixed process approvals, and corrective actions, • Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or related field, • 2+ years of manufacturing or process engineering experience, • Strong SolidWorks proficiency (3D modeling, assemblies, 2D production drawings), • Experience applying GD&T and interpreting aerospace engineering drawings, • Analytical mindset with strong troubleshooting and root cause skills, • Ability to manage multiple priorities in a fast-paced manufacturing environment, • Aerospace structural component manufacturing experience (fasteners, precision hardware, etc.), • Experience designing production tooling, fixtures, and inspection aids, • Knowledge of cold heading, CNC machining, thread rolling, heat treatment, plating, or NDT, • Familiarity with AS9100 and AS9102 standards Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Growing Team! Exciting Projects! American Manufacturer! This Jobot Job is hosted by: Lincoln Sprague Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $120,000 - $170,000 per year A bit about us: With over 60 years in the industry we are a leader in the aerospace components manufacturing! We believe in taking care of our people and making a quality product. This philosophy of taking care of our customers and our people above all else has caught the eye of some of the largest customers in the industry. These customers include; Boeing, Airbus, Lockheed Martin and more! If you are a qualified Cable Design Engineer looking for an opportunity to make technology that helps our military, Please Apply! Why join us? Do you want to work with some of the nation’s best Clients AND enjoy time at home w/ family? We do too! • Meaningful Work!, • Best in Class Firm!, • Competitive Compensation Package!, • Complete Benefits Package!, • Flexible Work Schedules!, • Accelerated Career Growth!, • Fun Company Activities!, • Profit Sharing! Job Details Job Details: We are seeking a highly skilled and motivated Wire and Cable Engineer to join our dynamic team. This is a permanent, full-time position offering the opportunity to work on cutting-edge projects in the engineering industry. The successful candidate will be responsible for designing, developing, and testing wire and cable systems for a variety of applications. This position offers a unique opportunity to work on projects that are vital to our company's success and growth. Responsibilities: As a Wire and Cable Engineer, you will be tasked with the following: 1. Design and develop wire and cable systems in accordance with industry standards and project requirements., 2. Conduct tests to verify the performance and reliability of wire and cable designs., 3. Collaborate with cross-functional teams to ensure the integration of wire and cable systems into overall project designs., 4. Troubleshoot and resolve issues related to wire and cable systems., 5. Prepare technical reports and documentation related to wire and cable design and testing., 6. Stay updated with the latest trends and advancements in wire and cable technology., 7. Provide technical guidance and support to junior engineers and other team members., 8. Ensure compliance with safety regulations and quality standards in all activities. Qualifications: The ideal candidate for the Wire and Cable Engineer position should possess the following qualifications: 1. A Bachelor's degree in Electrical Engineering or Mechanical Engineer. A Master's degree will be considered an advantage., 2. A minimum of five years of experience in wire and cable design., 3. Proficiency in using design software like AutoCAD, SolidWorks, or equivalent., 4. Strong knowledge of industry standards and regulations related to wire and cable systems., 5. Excellent problem-solving skills and the ability to troubleshoot complex issues., 6. Strong written and verbal communication skills, with the ability to prepare clear and concise technical reports., 7. Ability to work effectively in a team-oriented environment., 8. Commitment to maintaining high safety and quality standards., 9. Proven ability to manage multiple projects and meet deadlines., 10. Willingness to stay updated with the latest advancements in wire and cable technology. If you are a problem solver who enjoys working on complex projects and has a passion for wire and cable design, we would love to hear from you. Apply today to join our team and contribute to exciting projects that shape the future of the engineering industry. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description Founding Turbomachinery Engineer – Build the Next Generation of Advanced Power Systems! Los Angeles, CA | On-site Opportunity Summary Join a venture-backed energy technology startup on a mission to redefine how industrial power is generated and deployed. While legacy turbine platforms have seen incremental improvements over decades, true step-change innovation has remained rare. Our team is building a new class of high-performance rotating machinery designed to meet modern energy demands and unlock next-generation efficiency across traditional and emerging power markets. As a Founding Turbomachinery Engineer, you will play a central role in shaping both the product architecture and the engineering culture of the company. This is not a maintenance or optimization role. You will help design, analyze, build, and validate advanced high-speed turbomachinery from first principles. If you are motivated by clean-sheet engineering, hands-on hardware development, and the opportunity to influence core technical strategy from day one, this is a rare platform-level opportunity. About Us We are a deeply technical team of engineers with more than a decade of experience in turbomachinery analysis, rotating equipment design, and high-speed testing. Our focus is on reimagining industrial power systems through advanced turbine architectures and novel thermodynamic approaches. Backed by early-stage capital and driven by real-world validation, we are building hardware that bridges cutting-edge analysis with manufacturable, scalable systems intended for next-generation energy applications. Job Duties • Lead the architecture and development of high-speed rotating machinery systems from concept through validated hardware, • Perform aerodynamic, structural, thermal, and rotordynamic analysis to inform and optimize system performance, • Execute detailed mechanical design including 3D CAD modeling, materials selection, GD&T, and design for manufacturing and assembly, • Translate analytical results into practical hardware solutions through iterative prototyping and testing, • Support the development of custom test rigs and instrumentation for rotating machinery validation, • Analyze experimental data to refine models and drive rapid engineering iteration, • Collaborate closely with technical leadership, suppliers, and cross-functional engineers to deliver reliable hardware under aggressive timelines, • Establish engineering processes and best practices that support long-term scalability Qualifications • Bachelor’s degree or higher in Mechanical Engineering, Aerospace Engineering, or a related discipline, • 5+ years of experience working on turbomachinery or closely related rotating equipment such as gas turbines, turbopumps, compressors, turboexpanders, steam turbines, or turbochargers, • Strong fundamentals in fluid mechanics, thermodynamics, heat transfer, and mechanical design, • Demonstrated ability to take ownership of complex technical problems in a fast-paced environment, • Proficiency with modern CAD platforms such as NX, SolidWorks, Creo, CATIA, Onshape, or Fusion 360, • Clear communication skills and the ability to collaborate across engineering and leadership teams Preferred Experience • Experience designing or analyzing supercritical CO2 power systems, • Proven track record of carrying rotating machinery from initial design through full hardware testing and validation, • Development of custom turbomachinery test rigs and associated instrumentation, • Familiarity with manufacturing methods for high-temperature alloys and precision rotating components, • Experience integrating analysis tools into rapid hardware development cycles, • Prior early-stage or startup experience Why Join Us • Foundational technical leadership role with meaningful influence over product architecture, • Opportunity to build hardware from clean-sheet design through real-world validation, • Direct collaboration with experienced technical founders, • High ownership and visibility within a fast-moving engineering team, • Significant room for growth as the company scales, • Meaningful equity ownership, • Subsidized medical, dental, and vision insurance Compensation Details $150,000 – $225,000 #LI-AV

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Avionics team is responsible for the full lifecycle of Terran R's nervous system, designing, building, testing, installing, and operating the hardware that connects and controls every major electrical system on the vehicle and ground. The team leverages close partnership between avionics design, manufacturing, and test to enable rapid iteration and feedback loops. Engineers are deeply embedded into other functions within Relativity, working closely with propulsion, GNC, fluids, and stage engineering teams to ensure seamless integration and operation. Now is a unique time to join: you'll get to help shape Terran R's fundamental avionics architecture and be given a high degree of ownership on components that will fly. About the Role: We are seeking a Ground Support Equipment (GSE) Engineer with strong experience in designing, building, and deploying Ground Support Equipment (GSE) racks and related systems that interface directly with flight hardware. In this role, you'll lead the development of robust electrical and mechanical systems that support vehicle test, integration, and launch in challenging environments. You'll work cross-functionally with avionics, propulsion, structures, test, and software teams to ensure our EGSE is reliable, flexible, and safe. This position is ideal for someone who thrives on high ownership, fast iteration, and seeing their systems go from concept to launchpad. As an Avionics Ground Support Equipment (GSE) Engineer, you will: • Design, develop, integrate, and build of critical ground systems that support engine test, vehicle integration, and test and launch operations, • Collaborate cross-functionally with propulsion, avionics, software, test, and operations teams to deliver robust, scalable systems on tight timelines, • Oversee fabrication, bring-up, and validation of EGSE systems, including electrical testing, calibration, and functional checks, • Author interface control documents (ICDs) and engineering release drawings to ensure tight alignment between EGSE and flight/avionics hardware, • Work closely with safety, operations, and launch teams to ensure systems are compliant and operable under high-stakes conditions, • B.S. in Electrical Engineering, Mechatronics, Aerospace Engineering, or related field, • 5+ years of hands-on experience designing and deploying EGSE or electrical integration systems in aerospace or high-reliability environments, • Strong knowledge of signal integrity, grounding schemes, shielding, and power systems, • Hands-on experience designing, building, and commissioning electromechanical ground systems, • Proficient in mechanical CAD (e.g., SolidWorks) for rack layout and enclosure integration, • Familiarity with test automation and scripting (e.g., Python, LabVIEW, MATLAB) At Relativity Space, we are committed to transparency and fairness in our compensation practices. Actual compensation will be determined based on experience, qualifications, and other job-related factors. Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$148,000—$203,500 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at .

Job Description We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more. As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing. When you join ALTEN Technology USA, you'll collaborate on some of the world's toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow. Workplace: On-site, 5 days per week Location: Long Beach, CA Responsible for the design, development, and integration of mechanical, electrical, electronic systems and aerospace components, supporting the full product lifecycle from concept through manufacturing and assembly. The role involves 3D CAD design, simulation, and collaboration with cross-functional teams to ensure product performance, manufacturability, assembly, and compliance with aerospace standards. As responsible of the integration of the systems from components to manufacturing, the candidate will be in charge as well on designing all testing requirements for the components and final product. Responsibilities: • Develop 2D/3D CAD models and detailed engineering drawings for aerospace components (e.g., using SolidWorks/CATIA)., • Design and integrate mechanical systems, assemblies, jigs, and fixtures for manufacturing processes., • Perform simulation, analysis, and validation to ensure performance, quality, and compliance., • Collaborating with cross-functional teams (design, production, quality) for system integration and product development., • Ensure design for manufacturing and assembly (DFM-DFA) and support process planning for machining and assembly., • Prepare engineering documentation (drawings, BOMs, process sheets) and maintain design records., • Support new product introduction (NPI), testing, and troubleshooting of integrated systems., • Ensure compliance with aerospace standards (e.g., GD&T, AS9100, ISO 9001 OEM requirements). Required Skills: • Aerospace experience is an absolute MUST, • Bachelor's degree in mechanical / aerospace engineering, • 5–10+ years of experience in mechanical design, product engineering, or aerospace manufacturing, • Experience with OEM or Tier-1 suppliers preferred, • Strong mechanical, electrical design and product development knowledge., • Familiarity with assembly processes, fixation methods and part interfaces., • Proficiency in CAD tools (SolidWorks, CATIA, or similar)., • Understanding of GD&T, materials, and aerospace manufacturing processes., • Experience with simulation, analysis, and design validation., • Knowledge of manufacturing, tooling, and process optimization., • Familiarity with system integration and cross-functional engineering collaboration., • Strong problem-solving and analytical skills., • Knowledge of DFM/DFA (Design for Manufacturing & Assembly) principles Salary Range: • $120,000-$135,000, • The actual salary offered is dependent on various factors including, but not limited to, location, the candidate's combination of job-related knowledge, qualifications, skills, education, training, and experience ALTEN Technology is an Equal Opportunity Employer. Our Policy is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

Job Description AnySignal is a startup whose mission is to usher in the next generation of RF products and services. For the most demanding space and defense missions, AnySignal provides a flexible platform with world-class performance that is easy to deploy, monitor, purchase, and upgrade. Our team has a diverse range of backgrounds that cover cloud computing to artificial intelligence, communications and sensing, embedded systems, and much more. As an Avionics Mechanical Engineer on the hardware team, you will be responsible for owning the mechanical design and thermal analysis, manufacture, test, and deployment of highly integrated RF devices used by a large number of space customers. You will work with a team of avionics and RF hardware engineers to shepherd the product from initial design to vehicle integration, taking a full-stack approach to building robust space systems. Responsibilities * Own mechanical design of assemblies and mechanisms from early concept through detailed design, release, and integration (3D CAD, drawings, configuration control). * Perform structural analysis using a mix of hand calculations and finite element analysis to evaluate strength, stiffness, fatigue margins, vibration/shock response, and thermal-structural effects. * Build and execute thermal models (lumped/0-D, 1-D networks, and/or 3-D where appropriate), run sensitivity studies, and translate results into design decisions and requirements. * Correlate analysis with test and operational data, update models, and drive design improvements based on discrepancies and observed failure modes. * Lead technical trade studies across materials, geometry, interfaces, tolerances, manufacturing processes, and thermal/structural performance. * Conduct and document failure investigations related to loads, thermal environments, vibration/shock, and manufacturing variability; produce actionable corrective actions. * Coordinate cross-functionally with manufacturing, test, reliability, supply chain, and vendors; run design reviews and maintain clear technical documentation. Basic Qualifications * BS in Mechanical Engineering, Aerospace Engineering, or related discipline. * 3+ years experience in mechanical design and engineering analysis (structures and thermal). * Demonstrated ability to produce manufacturable designs and support hardware through build, test, and integration. Preferred Experience & Skills * Strong proficiency in CAD (e.g., Solidworks or similar) and production drawing best practices (GD&T a plus). * Proficiency in FEA for structural analysis (e.g., ANSYS Workbench or similar), including appropriate assumptions, boundary conditions, mesh strategy, and validation. * Thermal modeling experience using Thermal Desktop / ANSYS, and/or building 0-D/1-D thermal networks for rapid trades. * Experience designing for harsh environments (thermal extremes, vibration, shock, vacuum, or dynamic loads). * Track record of moving quickly on open-ended problems and driving closure with clear documentation and peer review. Compensation Range: $120K - $175K

We are an MIT-born, venture-backed Silicon Valley startup building a real-life 'Jarvis'.An AI Copilot for design and manufacturing.Our goal is to utilize advanced AI, physics simulation, and computer graphics to reduce costs and improve engineering productivity across all steps of the design and man

We are a Digital Product Engineering company that is scaling in a big way! We build products, services, and experiences that inspire, excite, and delight.We work at scale — across all devices and digital mediums, and our people exist everywhere in the world (18000+ experts across 36 countries, to

Headquartered in Miami, the company has a global presence with teams in Berlin, London, New York, and China.Once acquired, these brands are integrated into unybrands' platform, where operations are optimized, business performance is enhanced, and expansion into new product lines and markets is drive

Familiar with Zendesk, Asana, SolidWorks, Tableau.

Handshake is looking for skilled.AI research through flexible, hourly contract work.You'll draw on your hands-on experience with schematic capture, PCB layout, or embedded hardware design to evaluate AI-generated content and provide feedback that helps AI better understand electronics design tasks a

The Senior Controls Design Engineer is responsible for leading the design and development of complex HVAC/industrial control systems, with a strong focus on PLC logic design, HMI/SCADA architecture, and electrical control systems engineering.This role emphasizes upfront design, programming, and docu

Shape the future of innovation as we tackle cutting-edge projects that make a difference.We’re not just in the business of engineering—we’re building a brighter future.Driven by creativity and a culture of excellence, we believe in the power of engineering to solve today’s challenges and cre

OpenAI’s Stargate organization is building the physical infrastructure required to power frontier AI systems at massive scale.The team operates across the full lifecycle of infrastructure development and operations — from hardware, manufacturing, and partner readiness through deployment, bring-u

Proficiency in SolidWorks (or equivalent CAD) for designing tooling, fixtures, workstations, or production equipment.

RED Digital Cinema, a Nikon Group company, is a leading manufacturer of professional digital cameras.RED's modular camera system and groundbreaking image quality are by far the best on the market today! Started by Jim Jannard (founder of Oakley), RED continues to break ground with new products like

This role is responsible for producing high-quality.D models and detailed drawings using CATIA V5 (R21+).The individual will work closely with.Project and Manufacturing Engineers.This position plays a key role throughout the design lifecycle—from concept through production support—within engine-

Elastium is transforming the legacy footwear industry toward rapid, fully automated, and localized production.Our manufacturing platform combines proprietary additive manufacturing hardware, software, and materials science to make shoe production as effortless as pushing a button.We're building the

Aneuvo is a bioelectronic medical device company developing advanced neuromodulation technologies to treat conditions and injuries that have been resistant to traditional medical approaches.Founded in 2016 by UCLA researchers Dr.Yi-Kai Lo, the company's mission is to restore functional independence

Elastium is an advanced manufacturing startup company transforming the legacy footwear industry toward rapid, fully automated, and localized production.Our manufacturing platform combines proprietary 3D printing technology, software, and materials science to make shoe production as effortless as pus

This is a full-time on-site role located in Sylmar, CA.The Process Engineer will be responsible for evaluating, designing, and implementing manufacturing processes to improve efficiency and product quality.This role involves analyzing current processes, identifying areas for improvement, optimizing

Elastium is an advanced manufacturing startup company transforming the legacy footwear industry toward rapid, fully automated, and localized production.Our manufacturing platform combines proprietary 3D printing technology, software, and materials science to make shoe production as effortless as pus

If your skills, experience, and qualifications match those in this job overview, do not delay your application.US-AZ-TUCSON-M02 ~ 1151 E Hermans Rd ~ BLDG M02.Person, or Immigration Status Requirements:.At Raytheon, the foundation of everything we do is rooted in our values and a higher calling –