Trabajos solidworks en Rochester, New YorkCrear alertas

Job DescriptionDescription: General Job Summary: • Develops welding techniques, procedures, and application of welding equipment to problems involving fabrication of metals, utilizing knowledge of production specifications, properties and characteristics of metals and metal alloys, and engineering principles: Conducts research and development investigations to develop and test new fabrication processes and procedures, improve existing or develop new welding equipment, develop new or modify current welding methods, techniques, and procedures. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Develop weld profiles and processes that are appropriate for the materials and application of the product., • Design fixtures required for welding and fabrication using Solidworks models and drawings., • Develops and monitors processes to meet ASME Codes including analyzing weld coupons and creating reports. CWI certification preferred., • Write and maintain Welding Procedure Standards (WPS) for general and specific welding applications., • Direct and coordinate technical personnel in performing inspections to ensure workers' compliance with established welding procedures, restrictions, and standards; in testing welds for conformance with code requirements; or testing welding personnel for certification., • Proficient in implementing MIG, TIG and Resistance Welding processes, and is familiar with welding equipment and consumables used in production welding., • The Welding Engineer is responsible for supporting and troubleshooting welding manufacturing processes, optimizing production capabilities and driving welding improvements., • Observe and monitor weld processes for conformance to established WPS as Welding Coordinator, • Is authorized to interrupt any welding process found out of compliance with established WPS., • Will immediately inform the area supervisor of the non-conformance and production interruption., • Production will resume after the Welding Coordinator approves the corrected process., • Possess a general knowledge of Metal fabrication processes, techniques, and engineering including but not limited to CNC blanking, press brakes, stamping, machining, and finishing processes., • Collaborate and communicate across cross functional departments while applying knowledge and experience to innovate and improve welding processes used to manufacture products., • Explore new welding technologies that can be applied to improve Productivity and Quality and facilitate entry into new markets or provides a competitive advantage., • Apply problem-solving skills with an analytical approach and attention to detail. Directs data collection for analysis of weld processes., • Promote and adopt the continuous improvement culture by focusing on problem solving to drive improvements in the organization’s safety, quality, operational performance, customer satisfaction, and overall financial health of the company. Supervisory Responsibilities: None Requirements: Education Associate’s degree (A.A.) Bachelor’s degree (B.A.) preferred or equivalent combination of education and experience. Experience 3-5 years metal fabrication experience Computer Skills: To perform this job successfully, an individual should have knowledge of Microsoft Outlook, Microsoft Word, Microsoft Excel, Internet Explorer, Design software, and CAD software including: solidworks, Autocad, ProE and others. Other Requirements: • Good communication skills with the ability to develop reports and verbally communicate with different, • levels inside and outside the organization., • Ability to work effectively and efficiently independently, cross functionally, or part of a team., • Ability to be effective working with shop floor employees and to adjust work schedule at times if needed., • Ability to handle a variety of assignments and changing priorities., • Good computer skills with proficiency in Microsoft Excel, Word, and Power Point. High Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Mathematical Skills: High Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability: Very High Skills: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to stand, walk, sit, maneuver through the office and factory, talk or hear, and lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the noise level in the work environment is usually moderate.

Job DescriptionJob Overview: We are seeking a highly motivated and skilled Welding Engineer to join our team. We are looking for individuals that will be responsible for developing welding techniques, procedures, and application of welding equipment to problems involving fabrication of metals, utilizing knowledge of production specifications, properties and characteristics of metals and metal alloys, and engineering principles: Conducts research and development investigations to develop and test new fabrication processes and procedures, improve existing or develop new welding equipment, develop new or modify current welding methods, techniques, and procedures. Key Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Develop weld profiles and processes that are appropriate for the materials and application of the product., • Design fixtures required for welding and fabrication using Solidworks models and drawings., • Develops and monitors processes to meet ASME Codes including analyzing weld coupons and creating reports. CWI certification preferred. • Write and maintain Welding Procedure Standards (WPS) for general and specific welding applications., • Direct and coordinate technical personnel in performing inspections to ensure workers' compliance with established welding procedures, restrictions, and standards; in testing welds for conformance with code requirements; or testing welding personnel for certification. • Proficient in implementing MIG, TIG and Resistance Welding processes, and is familiar with welding equipment and consumables used in production welding. • The Welding Engineer is responsible for supporting and troubleshooting welding manufacturing processes, optimizing production capabilities and driving welding improvements. • Observe and monitor weld processes for conformance to established WPS as Welding Coordinator, • Possess a general knowledge of Metal fabrication processes, techniques, and engineering including but not limited to CNC blanking, press brakes, stamping, machining, and finishing processes., • Collaborate and communicate across cross functional departments while applying knowledge and experience to innovate and improve welding processes used to manufacture products., • Explore new welding technologies that can be applied to improve Productivity and Quality and facilitate entry into new markets or provides a competitive advantage., • Apply problem-solving skills with an analytical approach and attention to detail. Directs data collection for analysis of weld processes., • Promote and adopt the continuous improvement culture by focusing on problem solving to drive improvements in the organizations safety, quality, operational performance, customer satisfaction, and overall financial health of the company.Qualifications:, • Experience in welding process development, • Experience in use of robotics. Computer Skills: To perform this job successfully, an individual should have knowledge and proficiency in the use of Microsoft Word, Microsoft Excel, Outlook, and Solidworks. Experience with robotic programming. * Other Requirements: To perform this job successfully, an individual must have the ability to read blueprints, knowledge of business practices/protocols, and be able to maintain confidential information. * Good communication skills with the ability to develop reports and verbally communicate with different levels inside and outside the organization. * • Ability to work effectively and efficiently independently, cross functionally, or part of a team., • Ability to be effective working with shop floor employees and to adjust work schedule at times if needed., • Ability to handle a variety of assignments and changing priorities., • Good computer skills with proficiency in Microsoft Excel, Word, and Power Point., • Experience with MRP software, PLEX preferred. Language Skills: High Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. * Mathematical Skills: High Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. * Reasoning Ability: High Skills: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. * Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to walk, sit, use of computer keyboard, maneuver through the office and factory, use a 10-key calculator, and communicate with customer and management in person, by email or via telephone, and the Associate is occasionally required to lift and/or move up to 50 pounds. * PPE: Must wear safety glasses with side shields and steel toe/composite shoes while on the production floor. Gloves may be required if handling parts. * Work Environment: The work environment characteristics described here are representative of those an Associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. Hours: • Full Time - 40 hours per week, • Monday - FridayBenefits:, • Competitive salary and benefits package., • Opportunity to work in a dynamic and innovative environment., • Professional growth and development opportunities., • Collaborative and supportive work culture.Contact Us:

We are looking for a Manufacturing Process Engineer to join our Advanced Materials & Chemicals division onsite in Rochester, NY. You will support Film Finishing organization within the Industrial Films and Chemicals division at Eastman Business Park. In this role, you’ll provide mechanical and process engineering support for day-to-day operations and lead projects that enhance manufacturing efficiency, quality, and safety. Key Responsibilities: • Troubleshoot manufacturing issues and drive root cause analysis., • Lead capital projects from concept through implementation., • Design mechanical components and systems using SolidWorks and GD&T principles., • Own the process flow for assigned product lines, ensuring efficiency, quality, and continuous improvement., • Collaborate with operations, maintenance, and quality teams on process improvements., • Support documentation and quality systems to ensure compliance., • Apply Lean Six Sigma methodologies to optimize processes. Minimum Qualifications: • BS in Mechanical Engineering, Manufacturing or equivalent and 5–10 years of relevant experience OR Associate's degree and 5-10 years relevant experience., • Strong mechanical design skills and proficiency in SolidWorks., • Demonstrated ability to lead, plan, organize, and execute projects., • Excellent troubleshooting and problem-solving skills., • Proficiency in Microsoft Office (Excel, Word, Project)., • A strong work ethic, high motivation, and Self- Starter. . Preferred Qualifications: • Experience with Lean Manufacturing practices., • Knowledge of SPC, DOE, or Six Sigma process improvement methods., • Ability to use statistical methods for data analysis., • Strong communication skills and ability to thrive in a fast-paced environment. Learn more about Film Finishing:

A Day in Your Life at MKS: As a Manufacturing Engineer you will support and advance our diffraction gratings and precision optics manufacturing operations. This role is ideal for someone who wants to develop deep technical expertise while driving process improvement, automation, yield enhancement, and new product introduction. You will work closely with Operations, Quality, R&D, and Engineering to design robust manufacturing processes that improve performance, reduce cost, and increase capacity in a highly technical production environment. At MKS, our people are the driving force behind everything we do. We are innovators, problem-solvers, and collaborators who thrive on curiosity and continuous improvement. Our technologies enable breakthroughs across industries including semiconductor manufacturing, photonics, advanced optics, clean energy, space exploration, and next-generation communications. You Will Make an Impact By: \n • Develop, optimize, and sustain manufacturing processes for precision optics and photonics products\n, • Design and implement fixtures, tooling, automation concepts, and test methods to improve throughput, quality, and repeatability\n, • Lead continuous improvement initiatives focused on yield improvement, scrap reduction, cycle time reduction, and capacity expansion\n, • Support new product introductions from development through full production ramp\n, • Create and maintain manufacturing documentation including work instructions, process flows, control plans, and validation protocols\n, • Establish and monitor process controls including SPC and mistake-proofing techniques\n, • Troubleshoot process, equipment, and quality issues using structured problem-solving methods\n, • Train and support production operators and technicians on new processes and improvements\n, • Collaborate cross-functionally to resolve technical challenges and implement long-term solutions\n\n Skills You Bring: \n • Bachelor's degree in Mechanical, Manufacturing, Industrial Engineering or related field\n, • 3 + years of manufacturing engineering experience (internships/co-ops included)\n, • Experience working in a production environment with process improvement responsibility\n, • Strong problem-solving skills and comfort working hands-on on the manufacturing floor\n, • Familiarity with Lean Manufacturing principles and continuous improvement tools\n, • Experience with CAD modeling tools (SolidWorks or similar)\n, • Experience creating technical documentation and standard work\n, • Proficiency with Microsoft Office tools\n\n Preferred Skills: (Nice to Have) \n • Experience in optics, photonics, semiconductors, precision manufacturing, or advanced materials\n, • Knowledge of SPC, process capability, and data-driven manufacturing control\n, • Exposure to automation, test systems, or LabVIEW\n Salary Pay Range: 75,000-90,000 USD Annual, based on qualifications, experience and training, operational and business needs and other considerations permitted by law. Bonus: This position is eligible for a discretionary annual bonus, in an amount to be determined by MKS [or as applicable]. Benefits: MKS offers a comprehensive benefits package, including health insurance coverage (medical, dental and vision), 401(k) with company match, life and disability insurance, 12 paid holidays, sick time, 15 paid vacation days, [6 weeks fully paid] parental leave, adoption assistance and tuition reimbursement [and for participation in any stock programs, signing bonus, etc.] Globally, our policy is to recruit individuals from wide and diverse backgrounds. However, certain positions require access to controlled goods and technologies subject to the International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR). Applicants for these positions may need to be "U.S. persons." "U.S. persons" are generally defined as U.S. citizens, noncitizen nationals, lawful permanent residents (or, green card holders), individuals granted asylum, and individuals admitted as refugees. MKS Inc. and its affiliates and subsidiaries ("MKS") is an affirmative action and equal opportunity employer: diverse candidates are encouraged to apply. We win as a team and are committed to recruiting and hiring qualified applicants regardless of race, color, national origin, sex (including pregnancy and pregnancy-related conditions), religion, age, ancestry, physical or mental disability or handicap, marital status, membership in the uniformed services, veteran status, sexual orientation, gender identity or expression, genetic information, or any other category protected by applicable law. Hiring decisions are based on merit, qualifications and business needs. We conduct background checks and drug screens, in accordance with applicable law and company policies. MKS is generally only hiring candidates who reside in states where we are registered to do business. MKS is committed to working with and providing reasonable accommodations to qualified individuals with disabilities. If you need a reasonable accommodation during the application or interview process due to a disability, please contact us at: [email protected] . If applying for a specific job, please include the requisition number (ex: RXXXX), the title and location of the role

Job Description Framing Technology is in search of a dedicated team member who takes pride in their work and wants to grow with a company that values teamwork, customer satisfaction, and honesty. The ideal candidate is dependable, detail-oriented, and committed to contributing to a positive and productive work environment. As the CNC Operator you will be working under the direction of the CNC Department Supervisor. The CNC Operator uses CNC (Computer Numerically Controlled) machines to cut and machine various metals and plastics, such as aluminum, steel, and polycarbonate. Responsibilities include reading prints, properly setting up each machine before beginning work, and verifying parts are accurate once complete. We expect each CNC Operator to be proficient at setting up and running all the CNC machines in our warehouse. Communication and team cooperation is essential to the success of the warehouse and CNC team and is expected in all aspects of the job. Responsibilities: • Assist with setup and operation of a variety of CNC machines., • Plan routing by analyzing work orders, prints, BOMs, and other required paperwork., • Select and maintain proper tooling., • Select raw materials., • Learn the program cut sequence for each router from SolidWorks drawings., • Input offsets during job runs., • Cross-train in other departments and/or perform other warehouse tasks as assigned by your supervisor., • Perform standard maintenance tasks., • Maintain efficient output for all jobs., • Maintain a clean, organized, and safe working environment., • Communicate with other team members about any issues, needed equipment or tooling, or problems with jobs. Qualifications: • High school diploma or GED required, • Working knowledge of machinery and measurement tools, • Strong communication and interpersonal skills, • Familiarity with machining callouts and CNC applications, including waterjet, press brake, and VMC, • Excellent analytical and problem-solving skills, • Proficiency in time management, including the ability to prioritize, • Ability to maintain discretion and confidentiality with sensitive information, • Ability to demonstrate attention to detail and good record keeping, • Show initiative, thoroughness, and accuracy, • Perform all duties independently with minimal supervision, • Assume responsibility for staying aware of changes in company policies and procedures, • Maintain cooperative working relationships with supervisors and other staff members. Demonstrate a positive attitude. We offer a competitive benefits package that includes multiple health insurance options, dental and vision coverage, a flexible spending account (FSA), company-paid short-term disability and life insurance, a company-matched 401K, as well as paid vacation and sick time. #hc218481

Job Description Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9001, ISO:14001, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: This individual must function as a technical leader for the organization, with the responsibility of expediting the process flow of jobs through the factory from post order entry to the shipment of the product to the customer. All work must be performed in a timely and cost effective manner. In this role, the engineer is required to perform complex engineering and/or design tasks that require the development of new and improved techniques and procedures. Requirements Minimum Qualifications: Position is located in Rochester, NY • Excellent verbal and written communication skills, • Have a team player attitude that promotes commitment, reliability and follow through, • Detail oriented with strong organizational skills, • Ability to resolve problems using logical, systematic and sequential approaches, • Good computer skills with a proficiency in Microsoft Word, Excel and MRP Systems, • Solid understanding and application of Geometric Dimensioning & Tolerancing (GD&T), • Ability to read and understand blueprints at an advanced level, • Experience in the utilization of lean manufacturing practices and ISO Quality Systems, • Three years or more of manufacturing/sheet metal with welding fabrication knowledge, • CNC machining / programming background is a plus, • Ability to design & model in 3D CAD Software, Solidworks Preferred Production Specific Duties: • Voices all concerns while working with other production staff, Quality Assurance, Engineering and Vice President of Operations to resolve any and all current or potential problems affecting the production schedule, • Review all new project release packages to verify that customer’s specifications are achievable. Participate in new-product-launch meetings, • Assist Quality Assurance with establishing inspection documents and procedures, • Recommend continuous improvement actions for improving work processes Departmental Specific Duties: • Responsible for all phases of the CNC Programming Process, review Bill of Materials for purchasing to facilitate pricing inquiries, calculating material usages, etc., • Perform all phases of Project Management duties including cost estimating, manufacturing engineering, and working to ensure quality production and on time shipping of customer orders, • Create detailed drawings for flat blank layouts using CAD system, • Monitor actual time and material standards vs. quoted time and material standards, • Drive process improvement to generate cost reduction, • Help write the process sheets (travelers) for the jobs, • Ensure all programs are updated with any modifications from the previous run, • Design machining, inspection and assembly fixtures, • Provide technical direction to operators as needed, • Design tooling and gauges as needed to ensure customers quality requirements are achievable, • Control proper revision levels for all programs in the company database Measurement Tools: • On time delivery to customers, • Quality performance recognized in scrap reduction and minimized process variation, • Decrease in job setup time on all equipment, • Cost savings for production; including tooling, • Project management and document control organization skills

Job DescriptionDescription: Position Summary The Manufacturing Engineer is responsible for developing, optimizing, and sustaining manufacturing processes to support efficient, high-quality production. This role involves analyzing products and production methods to improve both new and existing operations. Working collaboratively within a cross-functional team environment, the Manufacturing Engineer applies technical expertise to drive continuous improvements that reduce cycle times, enhance product quality, and deliver measurable cost savings. Duties and Responsibilities • Design and implement robust manufacturing processes to ensure product stability, establish production standards, and support ongoing process improvements., • Optimize and innovate manufacturing methods, equipment operations, and overall production performance to enhance efficiency and reduce waste., • Collaborate cross-functionally with engineering, production, and other departments to troubleshoot issues and resolve production challenges., • Research, recommend, and integrate new technologies and systems to upgrade manufacturing capabilities and drive innovation., • Prepare accurate and timely quotes in response to customer deadlines, ensuring feasibility and alignment with production capabilities., • Design and develop end-to-end manufacturing solutions including processes, tooling and fixtures, CNC programs, and detailed work instructions. What We Offer • Competitive salary based on experience, • Career development opportunities, • Climate-controlled work environment, • State-of-the-art machinery and equipment Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Bachelor’s degree in Engineering preferred., • Prior experience as a Manufacturing Engineer or in a similar role is strongly preferred., • Proficient in CAD/CAM software, including SolidWorks, Mastercam, and PartMaker., • Knowledge of CNC manufacturing equipment and quality assurance methodologies., • Skilled in Microsoft Office Suite and experienced with ERP systems., • Strong project management, problem-solving, and multitasking capabilities., • Demonstrated commitment to maintaining health and safety standards., • Able to work both independently and collaboratively within a team environment. Environment & Physical Demands • Regularly required to stand, walk, stoop, kneel, crouch, and communicate effectively (talk/hear)., • May involve prolonged periods of both sitting and standing depending on task requirements., • Specific vision abilities include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus; prolonged magnified inspection may be required, which can lead to eye strain., • Requires good hand-eye coordination and dexterity in hands, arms, and fingers, including the ability to grasp and manipulate small components., • Frequent use of computers and other standard office or manufacturing equipment., • May involve handling of oils, solvents, and cleaning solutions—lab coats provided to minimize exposure., • Typically performed in a clean environment; employees are expected to help maintain cleanliness standards., • Safety glasses are required at all times; additional safety training may be required depending on the area., • The work is performed in a manufacturing setting where noise levels are generally loud., • May rotate between different workstations or shift tasks during the production process based on operational needs.

Job Description About the Role: The Industrial Engineer position comprises of a balance of technical expertise in data/metric analysis with a strategic drive to create value through process improvements, cost reduction and product improvement. The Industrial Engineer is instrumental in achieving operational excellence through innovation, development, evaluation, and implementation of superior methods and systems. The Industrial Engineer will partner with leadership throughout the organization to understand their business needs and put them in the best position for success by delivering robust continuous improvement plans. What You’ll Be Doing: • Lead the identification, evaluation, and implementation of automation opportunities across molding, assembly, machining, material handling, and secondary operations to improve safety, throughput, and cost competitiveness, • Act as a change agent for digital transformation, promoting a data-driven culture and training teams on new automated and connected manufacturing technologies, • Serve as the plant technical owner for Industry 4.0 initiatives, including data connectivity, machine monitoring, and digital workflows that enable real-time visibility into production performance, • Partner with Operations, Maintenance, IT, and Quality to integrate equipment, sensors, and control systems with existing manufacturing execution, maintenance, and reporting platforms, • Develop and standardize digital work instructions, automated data capture, and electronic production reporting to reduce manual inputs and improve data accuracy, • Support capital investment planning by building automation business cases, including ROI analysis, payback modeling, and risk assessment, • Drive continuous improvement through the use of manufacturing data analytics, identifying trends, constraints, and opportunities for process optimization, • Support new program launches by ensuring automation readiness, scalable cell design, and alignment with future-state manufacturing strategy, • Work closely with Finance to maintain BOM system, including the creation of new BOMs and revision of current BOMs., • Develop and implement Machine Operator Training Program., • Initiate, update and maintain Machine Operator work instructions on a daily basis., • Work actively on continuous improvement projects that involve the entire organization such as Kaizen, 5S, Lean Manufacturing and Visual Recorder., • Work with Manufacturing and all other facets of the organization to improve all ergonomic conditions on presses and machinery, while anticipating/evaluating hazardous conditions by identifying them prior to accident occurrence., • Coordinate Safety initiatives and lead Company to resolution on environmental, health and safety issues., • Provide guidance for packaging engineering methods and standards on a daily basis. Work with customers to define standard packs and returnable packaging. Work with customers to define and develop alternative packaging. We would love to hear from you if: • Bachelor’s Degree (B.A./B.S.) from four-year college or university; or two to four years of related experience and/or training; or equivalent combination of education and experience. Technical Skills • Proficiency in CAD software (SolidWorks, NX or equivalent) for layout design, automation cell concepts, tooling fixtures, and process documentation, • Working knowledge of PLC-controlled equipment and industrial controls, with the ability to interface effectively with OEMs, integrators, and maintenance teams for troubleshooting and system optimization, • Experience developing or supporting automated manufacturing cells, including robotics, conveyors, vision systems, or automated assembly equipment, • Strong understanding of industrial networks and data connectivity to support machine integration and data capture, • Ability to interpret and develop electrical schematics, P&IDs, and control narratives, • Familiarity with manufacturing data systems such as MES, machine monitoring platforms, CMMS, or ERP integrations, • Experience with capital equipment specification, FAT/SAT, commissioning, and validation, • Advanced Excel skills and comfort working with manufacturing data analytics tools (Power BI, SQL, or similar preferred), • Exposure to robot programming or structured automation programming standards, • Understanding of cybersecurity considerations in connected manufacturing environments Language Skills: Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers and the general public. Mathematical Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios and proportions to practical situations. Century Mold offers a competitive salary and a comprehensive benefits package that includes annual bonus, paid vacation and holidays, 401(k) matching, HSA contributions, and medical, dental and vision plans. Century Mold is an equal opportunity employer and affords equal consideration to all qualified applicants for all positions without regard to race, color, creed, religion, ancestry, citizenship, national origin, age, gender, sexual orientation and gender identity, disability, marital status, military or veteran status, predisposing genetic characteristics, domestic violence victim status, or any other status protected under local, state, or federal laws. Century Mold offers reasonable accommodation in the employment process for individuals with disabilities. If you need assistance in the application process to accommodate a disability, you may request accommodation at any time by contacting the Human Resources Department.

Job DescriptionDescription: Position Summary: The Mechanical & Manufacturing Engineering Co-op [Summer-2026] will be involved in the design and engineering of new wearable augmented reality devices, smart glasses, and their accessories and systems as well as working with manufacturing engineers to transition from prototype to volume manufacturing at our facility. The Coop will take part in various aspects of design and engineering of electro/mechanical/optical devices and their supporting systems, including concept work and prototyping, CAD design, testing, and general Mfg Eng support. This position will also support the functions of the R&D – Mechanical Department to meet the requirements of the relevant ISO 9001:2015 standards based on the quality objectives established by Top Management. Essential Duties & Responsibilities: • Under the direction and guidance of a Mechanical & Manufacturing Engineering Manager and Director of Product Development, learn to provide Mechanical Engineering support for various new and existing products and accessories as well as supporting the Manufacturing Engineering team., • Design and modify mechanical portions of existing and future products and fixtures using SolidWorks CAD software., • Create bills of materials, drawings, supporting documentation, and manufacturing work instructions., • Collaborate with various R&D teams; Electrical, Optical, and Quality Engineering to develop robust, accurate assemblies and systems that are optimized for size, performance, and DFMA., • Analyze the tolerance stack up of complicated miniature assemblies and incorporate findings into design., • Provide Engineering support to production groups in the form of collaboration on fixture design, testing, and assembly pilots., • Design, assemble, and test prototypes and mock-ups using 3D printing and other rapid prototyping techniques., • Support manufacturing engineering by troubleshooting processes and equipment, writing work instructions, process flow improvements, and occasionally operating equipment/machinery., • Design, complete, and document assembly and product level testing using molded prototypes and early production products., • Support or conduct investigative and reliability testing to mechanical and/or thermal parts/assemblies., • Help maintain and operate equipment used in engineering such as 3D printers, tools, and test equipment. To perform this job successfully, an individual should demonstrate the following competencies: • Written Communication – Read and interpret written information effectively, write clearly and concisely, adapt writing style for different audiences., • Verbal Communication – Give focused attention to what others are saying, take time to understand what and respond when appropriate without interrupting, speak clearly and effectively express ideas and opinions, adapt and react professionally in both positive and negative situations., • Teamwork & Collaboration – Balance team and individual responsibilities, consider others’ views objectively and with openness to changing your own, give and encourage feedback, contribute to a positive team dynamic, prioritize team success over personal interests, work effectively across departments toward company goals., • Professionalism – Interact with others in a considerate manner, follow through on commitments, react well under pressure and preserve confidentiality, control emotions, and accept responsibility, maintain focus on solutions and treat others with respect and consideration regardless of their status or position., • Motivation & Initiative – Demonstrate persistence and ability to adapt to changes in daily workflow and overcome obstacles, ask for and offer help when needed, work independently when required, volunteer readily and look for ways to improve and create successful outcomes, positively contribute to overall work environment., • Actively enrolled in a degreed program preferably in Mechanical or Manufacturing Engineering, or related field., • Self-motivated and driven to learn about new tools and concepts., • Proficient in Parametric 3D CAD software such as SolidWorks., • Junior or Senior in degree program., • Prior related work experience or internship., • Experience in AR, VR, or MR systems. Travel: Negligible. Physical Demands: Frequently required to sit, speak, hear, see, and perform repetitive motion (data entry). Occasionally required to lift or carry (10 lb. minimum). Reasonable accommodations will be made available if applicable.

Job Description Position Summary • Responsible for designing, fabricating, repairing, and maintaining precision tools, dies, molds, jigs, fixtures, and gauges used in the production of aerospace components., • Requires strong machining skills, experience with tight tolerances, and the ability to work with complex materials in a high-precision manufacturing environment., • Aerospace manufacturing experience and familiarity with aerospace quality standards are strongly preferred. Essential Duties & Responsibilities • Manufacture, repair, and maintain precision tooling, dies, jigs, fixtures, and gauges used in aerospace production., • Interpret engineering drawings, CAD models, and technical specifications to produce tooling components., • Operate and maintain manual and CNC machines, including:, • Lathes, • Mills, • Grinders, • EDM equipment, • Other precision machining equipment, • Ensure all tooling meets strict aerospace quality and tolerance requirements., • Collaborate with engineering, quality, and production teams to develop tooling solutions for new and existing programs., • Inspect finished tools using precision measuring equipment, including:, • Micrometers, • Calipers, • Gauges, • CMM equipment, • Troubleshoot tooling issues and implement continuous improvement solutions to improve manufacturing efficiency., • Maintain accurate documentation of tooling builds, modifications, and repairs., • Follow all safety regulations, quality procedures, and aerospace industry standards. Required Qualifications • High school diploma or GED required., • Tool & Die Maker certification, machining certificate, or apprenticeship preferred., • 3+ years of experience in:, • Tool making, • Tool & die, • Precision machining, • Aerospace or other high-precision manufacturing experience preferred., • Proficiency with:, • Manual machining equipment, • CNC machining equipment, • Ability to read and interpret:, • GD&T, • Complex engineering drawings, • Experience working with:, • Tight tolerances, • Aerospace materials such as aluminum, titanium, and specialty alloys, • Strong knowledge of:, • Precision measurement tools, • Inspection techniques, • Strong problem-solving and troubleshooting skills., • Ability to work independently and as part of a cross-functional manufacturing team. Preferred Qualifications • Experience in aerospace or defense manufacturing environments., • Familiarity with CAD/CAM software such as:, • SolidWorks, • Mastercam, • CATIA, • Knowledge of AS9100 quality standards., • Experience with:, • EDM, • Jig grinding, • Advanced tooling fabricationCompany DescriptionWe’re Infinia Search. We’re a relationship-driven search firm that proves that talent, ambition, curiosity, and an infinite work ethic creates exponential results for our clients and candidates.We’re Infinia Search. We’re a relationship-driven search firm that proves that talent, ambition, curiosity, and an infinite work ethic creates exponential results for our clients and candidates.

Job Description About Re:Build Optimation and Re:Build Manufacturing At Re:Build Optimation, we specialize in delivering custom-engineered process equipment and automated systems to clients across the globe. With nearly 40 years of experience in complex chemical process systems, we have built a reputation for precision, reliability, and innovation. Our multidisciplinary team of 70+ engineers, designers, and programmers, combined with 150,000 square feet of fabrication space and over 70 skilled tradespeople, allows us to provide full turnkey solutions—from initial concepts through fabrication, installation, and commissioning. As part of Re:Build Manufacturing, we leverage the strength of a national industrial powerhouse while maintaining the agility and personalized service of a specialized firm. We serve industries ranging from traditional and green energy to chemicals, pharmaceuticals, food & beverage, glass, and advanced manufacturing, offering tailored solutions that optimize efficiency and performance. At Re:Build Optimation, we believe in a collaborative approach, working closely with our clients to develop solutions that align with their unique operational goals. Our deep industry expertise and end-to-end capabilities make us the ideal partner for companies seeking innovative automation, process control, and engineered systems. Who We Are Looking For We are seeking an Electrical Estimator to develop accurate, field-informed cost estimates for industrial electrical construction and installation projects. This role is ideal for someone with a strong electrical field background who understands how work actually gets done—someone who can translate drawings and specifications into real-world execution plans, costs, and risks. You’ll work closely with construction managers, engineers, tradespeople, and manufacturers to ensure estimates are practical, competitive, and aligned with field realities across industries like energy, chemicals, pharmaceuticals, and advanced manufacturing. What You’ll Do * Analyze bid packages and develop detailed cost estimates including labor, materials, equipment, and subcontractor scopes * Perform takeoffs and interpret: Electrical drawings and schematics, P&IDs and Isometric and multi-view drawings * Conduct site walks and client walkthroughs to validate scope and conditions * Collaborate with construction managers, engineers, and field electricians to validate constructability and execution approach * Coordinate with manufacturers and vendors to confirm product specifications and pricing * Engage with inspectors and regulatory authorities to ensure permitting and compliance * Specify and source electrical materials (wire, conduit, fittings, control systems, etc.) * Manage vendor quotes, material procurement strategies, and delivery planning * Support project teams with schedule alignment, labor planning, and cost tracking * Ensure estimates reflect realistic installation methods and field constraints * Apply and uphold standards across: NEC / NFPA 70 and OSHA (29 CFR 1926) * Incorporate safety considerations such as LOTO, arc flash, and site-specific requirements into estimates * Identify opportunities to improve cost efficiency, estimating accuracy, and standardization * Maintain organized documentation of estimates, assumptions, and revisions What You Bring • 7+ years of electrical field construction experience, • 3+ years of electrical estimating experience, • Strong hands-on knowledge of power distribution, instrumentation and control wiring, • Ability to read and interpret blueprints and electrical schematics, P&IDs, and multi-view and isometric drawings, • Working knowledge of NEC, NFPA 70, and OSHA standards, • Experience with estimating tools and Microsoft Office (Excel, Word, Outlook), • Familiarity with AutoCAD or SolidWorks is a plus, • Strong organizational and multitasking abilities, • High attention to detail and analytical thinking, • Ability to balance office-based estimating with field validation, • Valid driver’s license, • Primarily office-based with regular field visits to construction and industrial sites The BIG payoff We are a company who is going to make a difference in the industries and the communities in which we choose to operate. Every employee of Re:Build will share ownership in the company and will share in the financial rewards of the success we achieve together, at all levels of the company! We want to work with people that reflect the communities in which we operate Re:Build Manufacturing is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, veteran status, marital status, parental status, cultural background, organizational level, work styles, tenure, and life experiences. Or for any other reason. Re:Build is committed to providing reasonable accommodation for qualified individuals with disabilities in our job application procedures. If you need assistance or accommodation due to a disability, you may contact us at or you may call us at 617.909.6275.

Job DescriptionPEKO Precision Products: We Make Products That Matter PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Mechanical Engineer Your Role: As a Mechanical Engineer, you will support the NPI (New Product Introduction) division in the design and development of cutting-edge technology, new products, processes, and automation for OEMs and startups. This role provides expertise to solve, design, process, and manufacturing challenges using various tools of the trade, including CAD, FEA, and other hands-on activities. Reports To: Engineering Manager Essential Functions: • Using CAD and other tools, ability to generate designs and manufacturing drawings adhering to customer specifications within defined cost, quality and delivery parameters., • Provide concepts and drawings in analog and digital formats., • Provide engineering analysis to support manufacturing, design and process development, • Apply knowledge in mechanical power transmission, fluid power, mechanical components, fabrication and basic automation for design and development., • Work with and support cross-disciplinary teams to solve product design, manufacturing and process problems., • Ability to respond quickly and professionally adhering to delivery requirements., • Participate in customer meetings and travel (<5days/year) as required., • Utilize problem solving and creative thinking skills to develop solutions and implement design options with customers, suppliers and manufacturing, while working collaboratively within a team environment., • CAD for 3D design and detailing; Solidworks, Inventor and/or CREO skills required., • Experienced in technical communication internally and externally; email, technical write-up, presentation, meetings., • MS Office: Word, Excel and PowerPoint., • Engineering Design: CAD, FEA, FMEA techniques, Analysis (stress, displacement, thermal), DFMA, tolerance analysis and GDT., • Experienced in developing and communicating project progress., • Experience with various manufacturing processes, i.e. machining (CNC, Mill, Lathe), sheet metal, welding, and materials., • Minimum education: BSME – 4 YEAR Mechanical Engineering / Engineering Technology Degree, • 3-5 years Engineering Design or problem solving with commercial or industrial equipment/processes., • 1-2 years minimum CAD design experience in SolidWorks or CREO., • Knowledge of industrial control systems and software a plus Work Authorization: US Persons PEKO Perks: • Competitive Compensation, • Tuition Reimbursement (IRS Allowable pre-tax Max), • 401K, Medical, Dental, Vision, • Flexible Spending & Health Savings Accounts, • Life, Short and Long-Term Disability Other: • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice., • For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision Products A reasonable estimate of the compensation range for this position is $75,000-$85,000 per year. The wage range for this role considers a wide range of factors when making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR 34p6exsC3b

Job Description Insero Talent Solutions is recruiting a Senior Product Development Engineer for a fast growing electronics manufacturing company in Rochester, NY. Job Summary: As a Product Development Engineer, you will be the main customer technical interface to guide projects from initial concept and prototype development through final product and process qualification with the intent of ultimately resulting in serial production. This individual will reside in the Product Development Group and be responsible for the day-to-day technological challenges associated with assigned development projects. Responsibilities: • Interpret and refine customer design parameters into innovative product and process solutions., • Interact with customer product development engineers and material suppliers to co-develop the proper material sets and designs., • Provide guidance to process technicians during the development of prototype samples., • Create technical prototypes and reports., • Act as a technical interface with the customer product development engineers., • Provide input to product and process cost models., • BS in Engineering., • 10+ years of Industrial experience., • Innovative problem solving., • Strong problem-solving skills., • Ability to manage multiple & varied responsibilities (i.e. tasks, projects) in a fast-paced environment., • Ability to work independently as well as in a team environment., • Excellent interpersonal and communications skills., • Experience in a high performance, highly collaborative work environment preferred., • Self-driven and highly motivated with strong attention to detail., • Aptitude for mechanical and motion-controlled devices., • Experience in business and customer interaction a plus., • AutoCAD or SolidWorks experience desired.

Job Description Job Summary: The Mold Technician is responsible for designing, building, repairing, and maintaining molds used in manufacturing processes. This role requires expertise in working with metal, plastic, or composite molds, along with strong proficiency in reading blueprints, operating machining tools, and ensuring all molds meet established quality and production standards. The ideal candidate will play a key role in supporting efficient manufacturing operations through precise and reliable mold work. Essential Duties and Responsibilities: Mold Fabrication & Assembly: • Manufacture, assemble, and modify molds using machining techniques such as milling, grinding, drilling, and EDM (Electrical Discharge Machining)., • Troubleshoot and repair worn or damaged molds to maintain production efficiency., • Operate CNC machines, lathes, grinders, and other precision tools to fabricate mold components., • Inspect molds for defects and ensure they meet strict quality standards before production use., • Follow all workplace safety protocols and ensure compliance with industry regulations., • Opportunity to learn diamond turning along with mold making/working on molds., • May be required to work in various areas of operations when necessary. The noise level in the work environment may range from moderate to loud. Education, Skills and Experience: • High school diploma or equivalent (technical certification preferred)., • 3+ years of experience in mold making, tool & die, or a related field., • Proficiency in reading blueprints, CAD designs, and precision measurement tools., • Strong knowledge of machining processes, CNC operation, and manual tooling techniques., • Ability to troubleshoot mold defects and perform repairs efficiently., • Apprenticeship or certification in Mold Making, Tool & Die, or related trade preferred., • Experience with injection molding, compression molding, or die-casting molds., • Understanding of various mold materials (e.g., steel, aluminum, plastic composites)., • Familiarity with industry software such as AutoCAD, Mastercam, or SolidWorks., • Communication skills, • Attention to detail, • Good math skills.

Job Description Insero Talent Solutions is recruiting a Mechanical Quality Test Technician for a manufacturing company in Rochester, NY. Job Summary: We are seeking a detail-oriented and technically skilled mechanical lab technician to support our engineering and testing teams. The role involves setting up and conducting mechanical tests, recording and analyzing data, maintaining lab equipment, and ensuring a safe and organized laboratory environment. Key Responsibilities: • Prepare, set up, and operate laboratory equipment for mechanical testing (e.g., tensile, compression, fatigue, vibration, hardness tests)., • Assist engineers and researchers with prototype testing and validation., • Collect and document test data accurately and assist in preparing technical reports., • Perform routine maintenance and calibration of lab instruments and machinery., • Ensure all lab activities comply with company safety protocols and industry standards., • Support failure analysis and troubleshooting of mechanical components., • Assist in fabricating test fixtures and mechanical assemblies., • Maintain inventory of tools, parts, and consumables used in the lab., • Collaborate with cross-functional teams including design, quality, and manufacturing. Qualifications: • Education: Diploma or Associate Degree in Mechanical Engineering Technology, Mechanical Engineering, or related field., • Experience: 1–3 years in a lab or mechanical testing environment preferred (entry-level candidates may be considered). Skills: • Strong understanding of mechanical systems and testing principles., • Hands-on experience with lab instruments and mechanical tools., • Ability to read and interpret mechanical drawings and technical documents., • Proficiency in data collection and basic analysis (Excel, LabView, etc.)., • Knowledge of safety practices in a lab environment. Preferred Qualifications: • Experience with CNC machines, 3D printing, or other prototyping equipment., • Familiarity with materials testing standards (ASTM, ISO, etc.)., • Basic knowledge of CAD software (e.g., SolidWorks, AutoCAD).

Job Description Job Summary: The Quality Manager is responsible for developing and maintaining a system to assure that all products manufactured by the organization meet customer specifications and achieve quality and reliability levels. Directs activities and provides guidance to quality department personnel. Essential Duties and Responsibilities: • Directs day to day activities of the Quality department, provides employee support, direction, and development. Make employment decisions regarding the Quality department., • Responsible for training and enhancing the knowledge of quality inspectors., • Perform quality engineering decisions during the pre-production process to develop and implement control plans and inspection documentation to ensure conformity of final product., • Responsible for monitoring Quality department’s output for 1st piece, in-process, receiving, final, and first article inspections., • Performs the quality authorization function for all Quality Management System documentation., • Meets with vendors, customers, quality representatives and company personnel to discuss and resolve quality problems and corrective actions., • Responsible for effective NCMR and MRB process., • Team leader of all Material Review Board functions., • Compiles corrective action summary reports for the Management Review Meetings., • Monitors, maintains, or develops, performance reporting systems relative to the effectiveness of inspection operations and initiates necessary action based upon results., • Interacts with company personnel to support scheduling and implementation of continuous improvement objectives in the manufacturing process., • Recommends and implements corrective action procedures to assure improvement of lean methods and elimination of wasteful practices in QA/other departments within the organization., • Responsible for all necessary quality related documents as required by customers and internal staff., • Assist with the Implementation and maintenance of the Quality Management System for ISO compliance including, ISO education, procedure writing, auditing. Additional Responsibilities: • Responsible for quality assurance personnel scheduling and inspection coverage for the facility., • Performs product/process analysis for cost reduction, quality improvement, and improved efficiency., • Responsible for all inspection tooling in the facility., • Responsible for all the calibration activities in the facility., • When requested, may work on special projects and various related assignments., • Performs other related duties and assignments as required. Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. The employee is occasionally required to reach with hands and arms. The employee is occasionally required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 25 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from low, moderate to loud. Education, Skills and Experience: • Bachelor’s degree or equivalent in education and experience., • Minimum 10 years experience in quality control, with management experience, • Assist with company print reviews and drawing interpretation, including extensive knowledge of GD&T., • Familiar with the operation and programming of a CMM., • Familiar with CNC technology and the use of CAD/CAM software (IE; Mastercam, Solidworks, ETC…), • Experience with supply chain management and supplier approval procedures, • Experience with functional gauging., • Problem solving and corrective/preventative action expertise., • Oral and written communication skills., • Ability to remain organized, • Must be proficient with Microsoft Office and Outlook., • Familiar with all aspects of ISO and ISO certification.

Job Description Elmira Stamping & Manufacturing-North is currently seeking a Laser Programmer to join our sheet metal manufacturing team. As a Laser Programmer, you will be responsible for creating precise CNC laser cutting programs using CAD/CAM software to optimize material usage and ensure efficient production. This role is critical to the accuracy, speed, and quality of our fabrication processes. About Us: Elmira Stamping & Manufacturing has specialized in medium- to high-volume contract metal stamping, progressive die stamping, and CNC machining since 1970. Elmira Stamping & Manufacturing specializes in both deep-draw and progressive die stamping. We are equipped with man servo, high-speed, mechanical, and hydraulic stamping presses ranging from 30 to 400 tons. Our machines are optimized for automation with in-die contact and non-contact sensors. We are also experts in secondary put-and-take operations for parts that cannot be completed in a progressive die. Additionally, we have multiple 5-axis Emmegi XT extrusion milling centers with a bed capacity of 30 feet, plus turrets, lasers, and more. The foundation for everything we do and make at Elmira Stamping is an unwavering commitment to quality and customer satisfaction! Position Overview • Develop and optimize CNC laser cutting programs using nesting software (e.g., SigmaNEST, Metalix, ProNest), • Interpret engineering drawings, blueprints, and specifications to create accurate cut paths, • Collaborate with production staff to ensure programs meet manufacturing requirements and timelines, • Maintain and update part libraries, tooling databases, and machine parameters, • Troubleshoot programming issues and revise code as needed to improve cut quality and efficiency, • Monitor material utilization and suggest improvements to reduce waste, • Support continuous improvement initiatives in programming and fabrication processes, • Associate degree or technical certification in manufacturing, engineering, or related field preferred, • 2+ years of experience in laser programming for sheet metal fabrication, • Proficiency in CAD software (e.g., AutoCAD, SolidWorks) and nesting/CAM software, • Strong understanding of sheet metal materials, thicknesses, and cutting characteristics, • Experience with multiple laser systems (e.g., Trumpf, Amada, Bystronic), • Familiarity with lean manufacturing and process optimization, • Knowledge of ERP systems and production scheduling, • Basic understanding of G-code and CNC machine operations, • Ability to read and interpret technical drawings and specifications, • Excellent problem-solving and analytical skills, • Strong attention to detail and organizational skills, • Effective communication and teamwork abilities Total Compensation Package: • Wage, • This role is based in the State of New York which requires the disclosure of salary ranges. The expected salary range for this position is $22.00 - $26.00 per hour. Elmira Stamping & Manufacturing provides salary ranges as a good faith estimate of what the company reasonably expects to pay for the position at the time of posting. Compensation offered to a selected candidate may vary based on factors such as (but not limited to) a candidate's job-related qualifications, skills, competencies, experience, and geographic location. The expected salary range for this position is subject to change and may be modified in the future., • Benefits - We recognize the value of a comprehensive benefits package and work vigorously to ensure our package meets the needs of our employees and their families. Eligible employees can elect and participate in variety of benefits including:, • Paid Holidays, • Paid Vacation / Sick Time, • 401 (k) Retirement Plan with Company Match, • Medical, Dental & Vision Insurance, • Employee Assistance Program (EAP), • Health Savings Account (HSA), • Company Paid Life Insurance, • Voluntary Insurance Benefits including Disability Insurance, Accident Insurance, Cancer Insurance, Critical Illness Insurance, Hospital Indemnity Insurance and Life Insurance Elmira Stamping & Manufacturing is an Equal Opportunity Employer. We provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job DescriptionDescription: Position Summary: The Junior Mechanical/Manufacturing Engineer is a dual role between the two disciplines. The candidate must be an energetic, self-starter able to support manufacturing and perform mechanical systems engineering for state of the art near eye imaging hardware. For manufacturing they will be responsible for assisting in Vuzix’s manufacturing processes, to support the direct supply chain issues from receipt of goods through the manufacturing, and for the assembly process to outgoing shipments. Will troubleshoot and diagnose assembly processes and reduce total defects through the analysis of data and corrective actions. For mechanical they will be responsible for supporting the various project groups in the way of CAD design and documentation, laboratory work, testing, and prototyping. They will collaborate within their own team as well as Electrical, Optical, and Quality Eng to support tasks within both R&D and Production. This position will also support the functions of the R&D – Mechanical Department to meet the requirements of the relevant ISO 9001:2015 standards based on the Quality Objectives established by Top Management. Essential Duties and Responsibilities: • Design and/or enhance manufacturing processes to assemble a bill of materials into a final product., • Utilize methods for waste minimization within a manufacturing system and address productivity., • Lead process improvements and controls through use of Six Sigma analysis and inspection/validation techniques., • Document Corrective Actions and Preventative Actions., • Generate, validate, and update as needed assembly work instructions in a clear and presentable configuration., • Provides manufacturing decision-making information by calculating production, labor, and material costs; reviewing production schedules; estimating future requirements., • Support both assembly floor priorities and longer-term development project activities., • Design and modify mechanical portions of existing and future products using SolidWorks CAD software., • Design, assemble, and test prototypes/mock-ups using 3D printing and other rapid prototyping techniques, • Gather the necessary information and create the engineering documentation to submit and implement engineering changes (ECO/ECN)., • 1-2 years’ experience in new product introduction and/or sustaining engineering., • Minimum Bachelor's degree (BA/BS) in mechanical engineering., • Working knowledge of SolidWorks and PDM., • Use of techniques such as additive manufacturing/3D printing to create models, various fixtures, etc., • Understanding and application of GD&T., • Strong interpersonal, communication, and time management skills with the ability to solve problems and multi-task in a fast-moving environment., • Experience in utilizing automation such as robotic assistance and metered dispensing systems, PLC, and Vision Systems as utilized for aiding productivity in manufacturing., • Operation and use of 3D printers as well as design integration/application of 3D printed parts. Preferred Qualifications: • Knowledge of standard manufacturing techniques such as fastening, structural adhesive bonding, hand assembly/low volume operations and tools and functional product testing., • Experience with precision alignments, tolerance analysis, and associated documentation control., • Experience with design and reliability testing as well as design of experiment., • Knowledge of Six Sigma analysis and methods for process improvement and control., • Knowledge of incoming inspection and validation techniques, such as optical inspection and CMM., • Basic knowledge of the requirements of an ERP system for product specifications and bills of materials and routings., • Understanding of FEA application and able to create representative simulations., • Opto-mechanical design and/or integration experience. Supervisory Responsibilities: None. Travel: Negligible. Physical Demands: Frequently required to sit, speak, hear, see, and perform repetitive motion (data entry). Occasionally required to lift or carry (10 lb. minimum). Reasonable accommodations will be made available if applicable.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Competitive salary, • Health insurance, • Paid time off, • Profit sharing About Us: We design and manufacture customized, turn-key induction heating systems for Industrial heat treating, brazing welding, hardening and general-purpose heating. Mechanical Design Engineer: Proficient in Solidworks 2022 Creation Role and Responsibilities Detail Drawings Bills of Materials Good Communication Skills: Work with assembly personnel Work with outside suppliers Proficient: in Microsoft Office (Word, Excel, Outlook, Etc.) Must be: Willing to travel if necessary . 10% maximum Must have means to get to work on time Qualifications and Education Requirements: Associates degree in Mechanical Engineering Technology or Equivalent work experience 5 years work experience using CAD Additional Notes: Being a self-motivated individual working on projects involving electrical engineering, assembly and final integration of machinery • Comprehensive benefits package, including health and life insurance, HSA account, 401K match, 2 weeks paid vacation and 10 paid holidays per year., • We only run a daytime shift Mon-Fri from 8am to 5:00 pm., • We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status or disability status.

Job DescriptionJob Overview: We are seeking a highly motivated and skilled Product Engineer to join our team! This individual will be responsible for launching a new product such as stand-alone sheet metal components and up to complex electro-mechanical assemblies from documentation control/management through shipping. Key Responsibilities: • Responsible for selecting processes and assisting with cost estimates for new products and tools., • Responsible for Floor Engineering Tech support for his or her part portfolio or customer base., • Effectively utilize Lean Principles when engineering the manufacturing processes., • Develops and documents machine processes and manual processes appropriate for the materials used to manufacture new and existing Customer products., • Aware of new and existing products based upon the total production cost during the product launch and through life of the product., • Serves as technical expert for the Proview Team (Prototype), • Serves as technical expert for the NORP (New Order Review Process) Team for launching new product into Production., • Will assist Technical Sales Engineer for specific programs., • Responsible for assisting and reviewing complex cost estimates., • Responsible for product quality and process safety. Interfaces with Quality to determine effective Quality Plans and if necessary implement NCMR root cause and corrective action closure., • Manages Continuous Improvement Projects., • May be asked to mentor other Manufacturing and Tool Design Engineers and oversee cross-functional project teams ensuring cost and price profitability to drive cost up front. Qualifications:, • 5-10 years related experience or training, • Associates degree (A.S.), • Bachelors degree (B.S.) preferred Industrial/Manufacturing or Mechanical Engineering or equivalent combination of education and experience. Computer Skills: To perform this job successfully, an individual should have knowledge of Microsoft Word, Microsoft Excel, Microsoft PowerPoint, Microsoft Project, Internet Explorer, Auto-CAD, strong 3D modeling (SolidWorks). * Other Requirements: Familiar with the sheet-metal industry, including fabrication and hard tooling for stamping, forming and welding of steel, stainless, aluminum as well as other metals. Familiar with DFM/DFA principals to reduce costs. Strong GD&T skill set. Familiar with assembly techniques. Tool-making or tool-engineering experience a plus. Ability to present a positive ownership attitude towards work responsibilities. Mental and visual attention with concentration on detail. Hours: • Full Time - 40 hours per week, • Monday - FridayBenefits:, • Competitive salary and benefits package., • Opportunity to work in a dynamic and innovative environment., • Professional growth and development opportunities., • Collaborative and supportive work culture.Contact Us:

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do.Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth.L3Harris provides an inclusive, engaging environment designed to empower empl

Working at the Naval Nuclear Laboratory we foster pride in belonging to an organization whose culture is made up of these core values: Trust, Empowerment, and Collaboration.Our company promotes a positive culture while ensuring the safety and reliability of our nation's naval nuclear reactors, and t

Working at the Naval Nuclear Laboratory we foster pride in belonging to an organization whose culture is made up of these core values: Trust, Empowerment, and Collaboration.Our company promotes a positive culture while ensuring the safety and reliability of our nation's naval nuclear reactors, and t

Manufacturing Engineer (Onsite) Primary Location: Poughkeepsie, New York V-Soft Consulting is currently hiring for a Manufacturing Engineer for our premier client in Poughkeepsie, New York.WHAT YOU’LL NEED: Technical Requirements and Certifications » Technical School Certification or post-seconda

Lockheed Martin is shaping the future of defense through cutting edge radar and missile defense technologies, and we want you to help write the next chapter.As the premier developer of active electronically scanned array (AESA) radars and integrated air and missile defense solutions for the U.Join a

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do.Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth.L3Harris provides an inclusive, engaging environment designed to empower empl

We are currently seeking a Gas Design Engineer for our gas group in our Rochester, NY office.The successful candidate will act in a consultant role for our existing utility clients.Types of projects include, but are not limited to, main and service replacements, system improvements, pressure upgrade

Familiarity with 3D CAD or Electrical Harness Design software (Solidworks Electrical, Zuken, Siemens Capital, etc.

Key ResponsibilitiesDesign and develop mechanical systems and components using CAD software, primarily SolidWorks and or Autodesk Inventor. Proficiency in CAD software, with extensive experience in SolidWorks and Autodesk Inventor.

Job Title: Electrical Engineer - Digital DesignJob Category: EngineeringTime Type: Full timeMinimum Clearance Required to Start: NoneEmployee Type: RegularPercentage of Travel Required: Up to 10%Type of Travel: Continental US* * *The Opportunity:CACI is looking for a mid to senior level Electrical E

Graphic Designer Job Duties: Prepares work to be accomplished by gathering information and materials.Plans concept by studying information and materials.Illustrates concept by designing rough layo

Graphic Designer Job Duties: Prepares work to be accomplished by gathering information and materials.Plans concept by studying information and materials.Illustrates concept by designing rough layo

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do.Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth.L3Harris provides an inclusive, engaging environment designed to empower empl

Familiarity with CAD software/tools such as AutoCAD 2D/3D and/or SolidWorks is desirable.

LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers.With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes:.High Protein Shakes, a sports nutrition drink to support po