Trabajos solidworks en Chattanooga, TennesseeCrear alertas

Job Description GIG Nuclear / Generation Industrial and Government This position is not eligible for recruiting or sourcing by outside parties. Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. We’ve got the power to energize your career and spark YOUR work/life balance through professional development and exceptional benefits. Don’t delay, plug in today for an inclusive and meaningful career. Mesa Associates, Inc. is a woman/minority-owned full-service engineering, procurement, and project management firm covering power, defense, aerospace, industrial, commercial, and municipal entities. We specialize in power generation and delivery services. Our Nuclear Services Division specializes in providing high-quality engineering, procurement, design, and project management for operating and new reactor clients, and partners with our other divisions to integrate nuclear design with electrical high-voltage, substations, switchyard, transmission line, and distribution design. We have been in the top 10 of EC&M's Top 40 Electrical Design Firms since 2012. With over 1,000 associates, we are big enough to perform, but small enough to care! Mesa Associates is seeking a Civil/Structural Designer to join our nuclear services team and contribute to the design development of modifications and new designs related to nuclear facilities. This is an opportunity to play a critical role in the engineering and design processes for commercial nuclear power generation. Mesa's strategic growth strategy for our commercial nuclear division is to create a ready service pool of available staff to support proposals and projects in nuclear generation. The position is hybrid working a minimum of 3 days in the office, typically Tuesday through Thursday, with the ability to work from home the remaining workdays. Candidates must be able to travel to plant sites when needed (approx. 6-8 days/month with ability to support longer durations). Education/Experience/Licensure: • Minimum of a High School diploma, Associate degree (preferred), • 4+ years of experience working with operating nuclear (DOE or commercial) clients and vendors (preferred), • Ability to obtain unescorted access at an operating or construction nuclear plant (required), • Proficiency in Microsoft Office (Excel, Word, Outlook, etc.), • AutoCAD and 3D modeling experience using Inventor or Solidworks (required) Responsibilities: • Understand and apply engineering design principles to create drawing deliverables in support of design packages, • Drive assigned projects to completion, • Perform self-checks to minimize rework, • Travel to client facilities for the purpose of gathering field information and participating in design review meetings/other as required, • Be responsible for working with other engineers and designers to provide input to design change packages for modifications at operating nuclear plants and other associated nuclear facilities, • Perform a broad range of Civil/Structural design activities to support development of design change documentation Successful candidates will: • Have effective oral and written communication skills, • Possesses good interpersonal skills to build relationships and work effectively in a team environment, • Have the ability to work on high performance teams, • May have design engineering experience associated with commercial nuclear sites, • Possess the ability to interpret codes and, regulations, and standard practices, • Be able to demonstrate adaptability; must be proficient in identifying, troubleshooting, and resolving issues within a nuclear power plant environment, • Possess excellent communication skills and ability to interface with customers and internal team members under a matrixed organization, • Have familiarity with general arrangement, equipment, structural, and mechanical drawings Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Job Description:\n\nBUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world. ABOUT THE POSITION At Astec, we are building a world-class electrical hardware and controls software engineering team. A team that values free thought for innovative idea generation and disciplined engineering for the realization of those ideas to drive solutions for our customers. By freeing our creative minds, we bring solutions our customers haven’t even realized they need yet. Through disciplined engineering we ensure the solutions we provide are effective, simple to use, reliable, and cost effective. The Electrical Engineer will be a part of a dynamic team of engineers working on the development of control/automation systems for heavy construction equipment, ranging from road pavers, road mills, woodchippers, wood grinders, etc. The engineer will be involved in the creation of product requirements, decomposition to electrical hardware and software requirements, design calculations, schematic generation, PCB designs, junction box designs, wiring harness routings and designs, and electrical design reviews of the same; all with an eye toward Design for Reliability (DfR). The engineer may also work on structured software decomposition, code development, software design reviews, and software unit and integration testing. The engineer will move from project to project as required and may be working on multiple projects within a given timeframe. All project work will be scheduled by the New Product Development Manager(s) and the Continuous Improvement Manager(s) such that the engineer will not be over allocated but will have definite deadlines and visibility into upcoming work. Electrical designs will be based on embedded controller and HMI displays. The designs will predominately be composed of 24VDC control of motors, valves, pumps, actuators, relays, etc. with sensor inputs in the same or similar range. Control outputs may be DC voltage or current, PWM, or PID control loop signals. Some designs will require AC power control using VFDs, soft starters, etc. Software will be developed on PLCs, embedded controllers, and HMI displays. Some legacy systems are coded in Ladder Logic, but all new systems will be coded in either CodeSys or C/C++. The Control Software Engineer will work with the Electrical Engineer(s) on a project to map I/O, define necessary configurations, understand sensor input requirements as well as device output drive requirements. The Electrical and Control Software Engineers will work cooperatively with the Mechanical Engineer(s) to develop the appropriate control controls hardware design as well as controls algorithms to produce the equipment functionality required by the customer and Product Management. The Electrical Engineer will also work with other cross-functional teams, including but not limited to sales, manufacturing, purchasing, and service to ensure the successful completion of projects and launch of equipment. Electrical Engineer may at times be asked to travel for project testing and system integration testing, as well as to develop business relationships with customers, dealers, and suppliers. They may also participate in product focus groups to gain critical customer application and design suggestions to assist in the development of product lines. Travel may also be required at times to troubleshoot and resolve customer equipment issues in the field. ESSENTIAL DUTIES AND RESPONSIBILITIES (may include but not limited to) · Works with the cross-functional Product Management Team to produce a complete and well-defined Product Functional Specification before product design is started. · Follow Structured System Design techniques to decompose the product function requirements into an effective control strategy for heavy construction equipment. · Uses knowledge of sensor technologies, control device technologies and process automation techniques to advance the simplicity of operation and troubleshooting of equipment to maximize productivity by enhancing operator functionality and the minimization of equipment downtime. · Uses knowledge of domestic as well as international electrical standards to design equipment with the widest market breadth without redesigning to minimize the number of models required to be manufactured. · Apply Design for Reliability processes and principles to realize desired equipment reliability and Total Cost of Ownership requirements. · Uses structured system design techniques to produce electrical hardware designs that are modular in nature, easy to test, easy to diagnose and simple to replace should field service repairs be required. · Develops and executes bench tests with the Controls Software Engineer on design modules and code units to ensure proper functionality before integration into the complete equipment design to ensure project success. · Uses computer-aided engineering design software and equipment to develop electrical / electronic design drawings and schematics. · Develop PCB layout designs for panels. · Develops 3D Junction Box designs with plug-and-play functionality that allow manufacturing to simply plug in all harnesses and requires no landing of conductors in equipment assembly. · Create 3D routed wiring harnesses for all wires and cables required for a system design. All harnesses shall be terminated in a connector to allow for a plug-and-play assembly. · Develops detailed drawings for new designs and modifications to existing designs. · Leads cross-functional electrical design reviews, including Design for Manufacturability and Design for Reliability. · Contributes to the development of product documentation, including production work instructions, training manuals, troubleshooting guides, and product test plans. · Identifies improvement opportunities and enhancements for product enhancements and/or cost reductions. · Contributes to project teams by championing the successful completion of project objectives, including schedule, budget, and feature set. · Contributes to the development of new processes and procedures to enhance the software and hardware design capabilities and work products of the engineering team. · Develops the electrical and software test plans for new designs and changes to existing designs and coordinates the testing and validation using these plans. · Participates in cross-functional software and HMI design reviews. · Participates in software design reviews for developed control software. · Assists customers, via telephone or on site, to resolve function and/or application issues. · Works with the Manufacturing department to resolve production issues. · Works with the Service Department to resolve field and warranty issues. · Works with the Purchasing Department and suppliers on new or existing component issues. · Works with the Technical Publications Department to develop and update operation/parts/service manuals. · Adheres to all Astec design and coding standards. · Performs engineering calculations as required during design cycle. · Follows proper safety procedures. · Performs other duties as assigned. MINIMUM EDUCATION and/or EXPERIENCE REQUIRED · Bachelor of Science (4-year) degree in Electrical Engineering from an accredited institution. · Minimum of three (3) years of experience in the design and development of industrial or mobile equipment controls. SKILLS AND ABILITIES REQUIRED Job-related Skills and Abilities · Knowledgeable of structured system design techniques. · Knowledge of Design for Reliability is highly desired. · Knowledge of design for safety standards such as CE, AS3000, SIL, HRN, etc. · Proficient with computer-aided design software. · Knowledge of network protocols such as CAN, Ethernet, Wireless 802.11, etc. · Proficient in the development, reading, and interpretation of electrical engineering drawings. · Proficient in electrical engineering systems design and troubleshooting, D/C controls design required, A/C design highly desired. · Ability to think creatively and propose innovative solutions to engineering challenges. · Ability to show competence in assessing, managing, and mitigating risks within a project and design. · Ability to work satisfactorily as a team member. · Good communication skills (both verbal and written). · Good organization and time-management skills. · Willingness to accept responsibility and take on new challenges. · Ability to exercise discretion and independent judgment on a customary and regular basis. · Proficiency with personal computer and Microsoft Office Suite software applications. · Proficiency with Electrical CAD software, specifically EPLAN, is highly desirable. · Adept at problem solving and root-cause analysis. Leadership Skills · Ability to mentor and lead junior level engineers in the design and execution of systems controls. · Ability to represent the electrical and software design team in cross-functional meetings by being the voice of good engineering practice. · Ability to step into a leadership void and lead a team to proper completion of tasks, projects, and investigations while encouraging others and moving toward a best solution for all involved. Language Skills · Ability to write reports, business correspondence and procedure manuals. · Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the public. · Ability to write routine reports and correspondence and effectively present information to customers and/or employees of organization and respond to questions from groups of managers, clients, customers, and the public. Reasoning Ability Skills · Ability to define problems, collect data, establish facts, and draw valid conclusions. · Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. · Must have strong analytical and troubleshooting skills. OTHER REQUIREMENTS · Pre-employment drug screen, physical, and background check. · Flexibility to work additional hours as required. · Occasional travel (including international). · Valid driver's license and ability to safely operate a motor vehicle. PREFERENCES · Proficiency with Solidworks, EPLAN. · Experience with CodeSys, C++, Telematics, hydraulic circuits, 12V/24V DC electric circuits and/or control systems for off-road construction equipment or heavy industrial equipment. · Knowledge of manufacturing processes. · Experience in the design and manufacture of off-road construction equipment. · Experience with Design for Reliability. SAFETY Astec is dedicated to a culture of Behavior Based SAFETY and a Healthy Environment! · Proficient in promoting safe and healthy work environment. · Notify area supervisor of product discrepancies or equipment malfunctions. · Adhere to established company policies and procedures paying special attention to safety regulations. · Report defective materials, equipment, or questionable conditions to the area supervisor/manager to identify and correct the root cause. · Wear personal protective equipment (PPE) in accordance with training guidelines. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to remain in a stationary position a minimum of 50% of the time, move and frequently operate a computer and other office equipment and occasionally properly employ objects, tools and/or controls. The employee is frequently required to communicate and exchange accurate information. The employee is regularly required to reach and occasionally attain non-standard physical positions for varying amounts of time. Specific vision abilities include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. The employee must regularly transport up to 10 pounds and occasionally transport up to 25 pounds. Lifting devices must be used or help must be requested for anything over 25 pounds. Required to occasionally ascend/descend, balance and work at various heights. Ability to travel by land and/or air for extended periods of time. Specific vision abilities required by this job include close, distance, color, and peripheral vision, depth perception, and ability to adjust focus. Our Culture and Values Employees that become part of Astec embody the values below throughout their work. · Continuous devotion to meeting the needs of our customers. · Honesty and integrity in all aspects of business. · Respect for all individuals. · Preserving entrepreneurial spirit and innovation. · Safety, quality and productivity as means to ensure success. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to a climate-controlled office environment and is occasionally exposed to a shop manufacturing environment. Office environment exposures include frequent and extensive telephone and computer use. The noise level in the office setting is usually moderate consistent with an office environment. Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Mines, road construction and forestry job site exposures include exposure to climate conditions indicative of the geographic location and the season. Field duties require that the employee work in close proximity to heavy roadbuilding and construction equipment (dump trucks, loaders, cranes, crushers, pavers, cold planers, material transfer vehicles, stabilizers, wheel loaders, excavators, skidders, feller buncher, chippers, grinders etc.) and traffic associated with mines, road construction, forestry and recycling sites. The employee is frequently exposed to moving mechanical pa

Job Description BUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world. ABOUT THE POSITION Design and make necessary engineering drawings for projects assigned. Prepare engineering drawings and make engineering calculations through use of AUTO CAD and INVENTOR as instructed. Key Deliverables · Provide accurate calculation of dimensions, weight limitations, and requirement materials. · Develop detailed designs with computer-aided design (CAD) software. · Identify operational issues and redesign products to improve functionality. · Ensure final designs comply with regulations. · Prepare references to illustrate workflow. Key Activities & Responsibilities · Make basic and fundamental calculations for proper and economical selection of components incorporated in the design of the specific equipment or projects assigned. · Direct the efforts of any draftsman assigned to work with on the specific equipment or projects. · Do detail and assembly drawing work as well as general and overall layout work. · Write and release or supervise the writing and releasing of specifications and bills of material if required to cover the specific equipment or projects assigned. · Design new or special products and new developments or modifications on our product line in accordance with the theoretically established design specifications as to size, capacity, or other requirements. · Complete assignments on time as scheduled per Engineering release date. · All other duties as assigned. To be successful in this role, your experience and competencies are: · Two-year Mechanical Drafting/Design Technology Degree preferred. · 2+ years of Experience in heavy equipment and/or structural design as well as AutoCAD 2-D and INVENTOR 3-D CAD software experience (or something similar like SolidWorks or Pro-E) is preferred. · Ability to operate necessary office equipment and tools to perform drafting functions which include CAD and INVENTOR systems. · Ability to work well with others and demonstrate good oral and written communication skills. · Ability to perform duties in environments which include heavy industrial setting, quarry/pit locations, and construction sites with associated air pollutants and noise levels. · Ability to climb on equipment to inspect and gather data. Supervisor and Leadership Expectations None Our Culture and Values Employees that become part of Astec embody the values below throughout their work. · Continuous devotion to meeting the needs of our customers · Honesty and integrity in all aspects of business · Respect for all individuals · Preserving entrepreneurial spirit and innovation · Safety, quality and productivity as means to ensure success WORK ENVIRONMENT Office While performing the duties of this job, the employee is regularly exposed to risk of injury in an office environment and occasionally a manufacturing shop plant environment. Duties include a typical office setting including extensive computer work, sitting or standing. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Manufacturing Environment Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person’s veteran status or any other characteristic protected by law or executive order.

Job Description BUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world. ABOUT THE POSITION Design and make necessary engineering drawings for projects assigned. Prepare engineering drawings and make engineering calculations through use of AUTO CAD and INVENTOR as instructed. Key Deliverables · Provide accurate calculation of dimensions, weight limitations, and requirement materials. · Develop detailed designs with computer-aided design (CAD) software. · Identify operational issues and redesign products to improve functionality. · Ensure final designs comply with regulations. · Prepare references to illustrate workflow. Key Activities & Responsibilities · Make basic and fundamental calculations for proper and economical selection of components incorporated in the design of the specific equipment or projects assigned. · Direct the efforts of any draftsman assigned to work with on the specific equipment or projects. · Do detail and assembly drawing work as well as general and overall layout work. · Write and release or supervise the writing and releasing of specifications and bills of material if required to cover the specific equipment or projects assigned. · Design new or special products and new developments or modifications on our product line in accordance with the theoretically established design specifications as to size, capacity, or other requirements. · Complete assignments on time as scheduled per Engineering release date. · All other duties as assigned. To be successful in this role, your experience and competencies are: · Two-year Mechanical Drafting/Design Technology Degree preferred, but equivalent experience in lieu of formal education will be considered. · 2+ years of Experience in heavy equipment and/or structural design as well as AutoCAD 2-D and INVENTOR 3-D CAD software experience (or something similar like SolidWorks or Pro-E) is preferred. · Ability to operate necessary office equipment and tools to perform drafting functions which include CAD and INVENTOR systems. · Ability to work well with others and demonstrate good oral and written communication skills. · Ability to perform duties in environments which include heavy industrial setting, quarry/pit locations, and construction sites with associated air pollutants and noise levels. · Ability to climb on equipment to inspect and gather data. Supervisor and Leadership Expectations None Our Culture and Values Employees that become part of Astec embody the values below throughout their work. · Continuous devotion to meeting the needs of our customers · Honesty and integrity in all aspects of business · Respect for all individuals · Preserving entrepreneurial spirit and innovation · Safety, quality and productivity as means to ensure success WORK ENVIRONMENT Office While performing the duties of this job, the employee is regularly exposed to risk of injury in an office environment and occasionally a manufacturing shop plant environment. Duties include a typical office setting including extensive computer work, sitting or standing. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Manufacturing Environment Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person’s veteran status or any other characteristic protected by law or executive order.

Job Description GIG Nuclear / Generation Industrial & Government This position is not eligible for recruiting or sourcing by outside parties. Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. The position is hybrid working a minimum of 3 days in the office, typically Tuesday through Thursday, with the ability to work from home the remaining workdays. Candidates must be able to travel to plant sites when needed (approx. 6-8 days/month with ability to support longer durations). We’ve got the power to energize your career and spark YOUR work/life balance through professional development and exceptional benefits. Don’t delay, plug in today for an inclusive and meaningful career. Mesa Associates, Inc. is a woman/minority-owned full-service engineering, procurement, and project management firm covering power, defense, aerospace, industrial, commercial, and municipal entities. We specialize in power generation and delivery services. Our Nuclear Services Division specializes in providing high-quality engineering, procurement, design, and project management for operating and new reactor clients, and partners with our other divisions to integrate nuclear design with electrical high-voltage, substations, switchyard, transmission line, distribution, and artificial intelligence integration design. We have been in the top 10 of EC&M's Top 40 Electrical Design Firms since 2012. With over 1,000 associates, we are big enough to perform, but small enough to care! Education/Experience/Licensure: • Bachelor of Science degree in Mechanical or Nuclear Engineering from an accredited university (required), • EIT (highly preferred) – or ability to obtain EIT within one year of employment (required), • Previous design experience related to modifications in nuclear (DOE or commercial) plants (preferred), • 4+ years' experience working with multiple operating nuclear clients and vendors (preferred), • Ability to obtain unescorted access at an operating or construction nuclear plant (required), • Basic knowledge of mechanical design codes (ASME, ANSI, API, NFPA), • Proficient computer skills (e.g. Microsoft Office Suite). Additional software skills including Bluebeam, MicroStation, AutoCAD, Vault, Plant3D, Inventor, ReCap, SolidWorks, FARO Scene, and other 3D rendering programs (preferred) Responsibilities: • Participate in the development of deliverables for nuclear projects within the Mechanical and/or Nuclear discipline, • Report to an assigned Project Engineer and act as a Design Engineer for Mechanical and/or Nuclear projects, • Be responsible for working with other engineers and designers to prepare design change packages for modifications at operating nuclear plants and other associated nuclear facilities, • Be proficient in preparation of engineering change packages (EC’s), • Conduct field walkdowns to determine existing configuration of plant structures, systems, and components, • Follow a strict adherence to mechanical codes and standards Successful candidates will: • Possess the ability to interpret codes and, regulations, and standard practices, • Be able to demonstrate adaptability; must be proficient in identifying, troubleshooting, and resolving issues within a nuclear power plant environment, • Have effective oral and written communication skills (includes technical writing), • Possess excellent communication skills and ability to interface with customers and internal team members under a matrixed organization Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Job Description GIG South / Generation Industrial & Government This position is not eligible for recruiting or sourcing by outside parties. Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. We’ve got the power to energize Your career and spark YOUR Work/Life Balance through professional development and exceptional benefits. Don’t delay, plug in today for an inclusive meaningful career in power, distribution, transmission, engineering, design, technology, or innovation at Mesa Associates, Inc. Mesa Associates, Inc. is seeking a Senior Mechanical Engineer to work with other members of the mechanical engineering team to deliver projects of varying complexity and size to our power generation clients. Work in a team environment alongside engineers, drafters, and other design members as well as other discipline teams. Daily tasks will include the design of additions and modifications to power generation facilities related to mechanical systems including: • Perform as lead Responsible Engineer on a variety of projects, • Perform tasks related to high energy piping such as pipe stress analysis, model fluid systems, material selection, develop weld procedures, and perform root cause analysis for our customers on high energy piping failures., • Development and presentation of detailed design models utilizing AutoCAD Plant 3D, Inventor, Solidworks, Revit and/or Navisworks, • Review drawing package preparation and review - AutoCAD, Plant 3D, and MicroStation, • Development and modification of Piping and Instrumentation Diagrams (P&IDs), equipment layout, piping plans/details, pipe support details, piping isometrics, and bills of materials., • Laser scanning technology – Plant 3D, Navisworks, and Recap, • Perform walkdowns and collects detailed field information related to site configuration, collection of existing equipment data, and completion of onsite laser scans, • Perform peer checking of packages developed by other design team members, • Provide direction and mentoring of other design members and drafters., • Note that the actual projects assigned are based on the needs of the company and may cover a variety of sources from hydro, industrial, government, etc. Successful candidates will be: • Well organized and self-motivated to complete tasks within agreed schedules., • Creative thinkers with the ability to judge between alternate solutions to provide the optimal solution., • Available to work overtime as necessary to meet project schedules and commitments., • Available to travel out of town for project meetings and site visits., • Safety consciousness and will strictly adhere to company and client safety standards., • Successful candidate will have a background in Power Generation, Pulp and Paper, or Chemical processes Responsibilities: • Apply basic knowledge of system design principles and practices to develop a complete and accurate design package., • Work closely with engineers, members of design team, and other disciplines on multi-discipline projects., • Development of detailed design packages. This includes development of drawing packages including but not limited to equipment layouts, piping general arrangements, pipe support details, and isometrics., • Manage personal task assignments, and adheres to project scope, schedule, and budget on all assigned tasks., • Perform engineering calculations and size mechanical equipment., • Taking leadership of projects is a critical skill for this position. Educational/Experience/Licensure: • Required BSME and PE license (TN, GA, AL preferred), • Preferred - Minimum of eight (8) years of progressive experience in piping and plant design, • Required – Pipe stress analysis experience using AutoPipe or Caesar pipe stress software, • Required - SME knowledge of pumps, valves, and heat exchangers, • Preferred – knowledge of welding and weld repairs, • Required - Working knowledge of applicable industry codes and standards including but not limited to ASME B31.1, ASME B31.3, NFPA, ANSI and API. Location and Travel • Travel to support projects is required. Typically, travel is less than 10% overnight but is determined by the needs of the company., • Location – Remote in southeast; Atlanta, Birmingham, Chattanooga, Memphis, Nashville, Huntsville Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Job DescriptionDescription: About the Role The Manufacturing Engineer develops, evaluates, and improves manufacturing methods to achieve superior quality, lower product cost, and greater efficiency. Applying knowledge of design, materials, fabrication, welding, paint processes, tooling, and assembly standards, this role spans two core functions: driving production excellence on the assembly floor and supporting new product development from prototype through launch. You will work closely with design engineering, production, quality, and supply chain teams to ensure every product can be built safely, efficiently, and on time. Responsibilities • Create and continuously improve standard work practices for equipment assembly, • Lead troubleshooting of mechanical, electrical, and hydraulic issues in production, • Provide Design for Manufacturing and Assembly (DFM/DFA) guidance to new product development project teams, • Support new product introductions from prototype procurement through production launch, • Coordinate with engineering, production, project managers, and supply chain to meet project timelines, • Design equipment, processes, and shop layouts for maximum efficiency and flow, • Recommend and implement cost reductions and functional design improvements, • Partner with quality and shop floor teams on root cause analysis and problem resolution, • Manage production bills of material (BOMs) and support material requirement planning (MRP) systems, • Ensure all changes comply with ergonomic and safety standards, • Train employees as needed across production and assembly operations, • Other duties may be assigned Requirements: Required Qualifications: • Bachelor's degree in Mechanical, Manufacturing, or Industrial Engineering (or equivalent engineering field), • 3–5 years of experience in a manufacturing environment, • Experience or education in electrical or hydraulic system troubleshooting, • Ability to read electrical and hydraulic system schematics, • Ability to read and understand design drawings with Geometric Dimensioning and Tolerancing (GD&T), • Strong computer skills: Excel, Word, SolidWorks, CAD software, and ERP/MRP systems, • Effective communication and interpersonal skills Preferred Qualifications: • Hydraulics, Pneumatics, or Electrical Systems certifications, • Experience with sheet metal fabrication and CNC machining, • Knowledge of welding science and best practices, • Experience with MS Project or similar project planning software, • Experience with ERP material and routing setup Physical Requirements & Work Environment: • Split time between office and production floor; substantial time on the factory floor required, • May occasionally exert up to 35 pounds of force with assistance; frequently up to 10 pounds, • May push, pull, lift, carry, grasp, or otherwise move objects as needed, • Safety glasses, ear protection, and safety shoes required within the factory environment, • Must be able to climb onto and under mobile equipment to access mechanical and electrical components

Job Description RFA Engineering (www.rfamec.com) is an engineering service provider dedicated to delivering our clients with timely engineering support and expertise. We are seeking a growth-oriented candidate to become an integral part of our engineering team. The selected candidate will work with an experienced engineering staff using state-of-the-art engineering tools & processes. This position will operate onsite at our customer's world-class engineering and manufacturing facility. This is a full-time position with a full benefit package listed below that includes opportunities for professional growth, direct hire by our customers, and additional opportunities within our own organization. Mechanical Design Engineer - Hydraulics We are seeking a Mechanical Design Engineer with a focus on hydraulic systems to support product design and integration. This role involves working closely with suppliers, customers, and cross-functional teams to develop efficient, cost-effective solutions. Key responsibilities include 3D modeling, creating 2D drawings, supporting assembly line challenges, and troubleshooting hydraulic systems. Responsibilities • Communication with suppliers and customers on product selection and integration, • Use of SolidWorks to support 3-D Modeling of components, sheet metal and hydraulic or electrical routings., • Creation and support of 2D drawings and specification documentation, • Work with manufacturing, quality, product verification and validation, customer support and suppliers to develop efficient and cost-effective designs, • Support Assembly Line challenges, • Using Hydraulic Schematics to troubleshoot and validate system function., • Compile and furnish necessary information (engineering decisions and reports of pertinent design analyses data) to document the design solution required for building of prototypes and adoption of the design with possible involvement of other functional engineers., • Provide hands-on support during prototype builds, including coordination with suppliers, troubleshooting assembly and integration issues, and validating component fit and function. Requirements • Bachelor's of Science in Mechanical, Electrical, Aerospace, or Agricultural Engineering or related degree, • Minimum 3 years of demonstrated experience working with hydraulic components or systems, • Experience in 3-D Modeling Software; SolidWorks (Preferred), • Strong mechanical and electrical aptitude demonstrated through work experience or hobbies, • Excellent communication both written and verbal, • Demonstrated ability to meet deadlines and commitments, • Strong analytical, problem solving and troubleshooting skills, • Ability to thrive in a team environment Desired Attributes • Previous experience with PDM software (Windchill, PDMLink or Similar), • Strong understanding of GD&T, • Design experience with off-road mobile equipment, • Ability to address quality issues, determine root cause and drive to a corrective action, • Desire to work in an engineering environment focusing on robust & cost effective designs, • Experience operating off-road mobile equipment Visa sponsorship is NOT available for this position. Pay Range: $75,000-$100,000 – Commensurate with experience About RFA Engineering RFA Engineering has provided product development and engineering services to industry leading customers since 1943. Our primary focus is the development of off highway equipment including agricultural, construction, mining, recreational, industrial, and special machines. Our work includes concept development, product design, documentation, problem-solving, simulation, optimization, and testing of components, systems and complete machines. Our engineering staff is located at our Engineering Center in Minneapolis, branch office in Dubuque, IA, and at numerous customer sites throughout the U.S. Competitive Benefits • Health and Dental Insurance, • TelaDoc Healthiest You, • Supplemental Vision Insurance, • Company Paid Life Insurance, • Company Paid Long-Term Disability, • Short-term Disability, • Retirement Savings Account (Traditional 401k & Roth 401k), • Flexible Spending Plan Dependent Care, • HSA for Medical Expenses, • Bonus Plan (Exempt Employees Only), • Paid Time Off (PTO), • Paid Holidays, • Bereavement Leave, • Employee Assistance Programs (EAP), • Education Assistance Equal Opportunity and Veteran Friendly

Job Description Position Title Adjunct Faculty – Engineering Description At Chattanooga College MDTC, the Adjunct Faculty – Engineering will help implement our strategy of “Where a small school can make a BIG difference!!”. The Adjunct Faculty – Engineering will provide high-quality instruction and academic support to engineering students to support student success, retention, and workforce readiness. This includes responsibilities such as delivering course content, facilitating lab activities, and assessing student learning outcomes. Ideal candidates must have excellent interpersonal, communication, problem-solving, and listening skills. Candidates must be able to adapt to a fast-paced work environment and manage multiple priorities and changing assignments. This is an instructional position supporting the Engineering Department. This role requires considerable interaction with students and faculty through individual meetings, group sessions, and/or events. Adjunct Faculty are expected to possess extensive knowledge of engineering principles, mathematics, and industry-standard software. They must be able to interpret individual needs, provide personalized support, and work effectively with individuals who may be confused, stressed, or demanding. Employees in this role can expect to support individuals regarding academic plans, progress, and career goals , assist with decision-making related to educational and institutional processes , and help guide individuals toward successful outcomes. This position requires maintaining confidentiality and accurate records to ensure compliance with accreditation standards, institutional policies, and federal regulations (e.g., FERPA, as applicable). The role may also support institutional events such as Orientation, Graduation, or engineering competitions. A strong commitment to equity, access, and success for underrepresented or at-risk populations is essential. Responsibilities • Provides instructional support to a diverse population of engineering students, including regular contact regarding progress and performance., • Implements institutional or departmental strategic priorities related to student retention and engagement., • Counsels, advises, or supports individuals through individual and group sessions to address concerns and provide guidance., • Educates individuals on institutional resources, policies, procedures, and expectations., • Implements solutions, including technology, to promote efficiency, access, and success., • Completes required professional development and training annually., • Supports department-wide and student services initiatives., • Maintains accurate documentation and records in compliance with institutional, accreditation, and federal requirements., • Collaborates with departments and colleagues to increase engagement, retention, and success, especially for at-risk populations., • Provides appropriate referrals for personal, social, and/or academic concerns that may impair success., • Upholds confidentiality and complies with institutional policies, accreditation standards, and federal regulations., • Assists with planning and coordination of events such as workshops or career fairs., • Maintains tools, systems, or resources necessary to effectively perform job duties., • Remains current on relevant state and federal guidelines, emerging best practices, and research related to the role., • Collaborates with the Department Leadership., • Please note: This job description is not exhaustive, and additional duties may be assigned as needed. Skills • Strong interpersonal, communication, and public presentation skills., • Ability to establish and maintain effective working relationships with students, faculty, staff, and external partners., • Ability to communicate clearly and professionally in verbal and written formats., • Knowledge of the role’s function in supporting learning, access, and success., • Ability to use technology to support services, including Microsoft Office, learning management systems (LMS), and engineering software (e.g., AutoCAD, MATLAB, or SolidWorks). Education & Experience • Education or Training:, • Bachelor’s degree with a Professional Engineer (PE) license required, • Master’s degree in Engineering (Mechanical, Civil, Electrical, or related field) preferred, • Experience:, • A minimum of four (4) years of experience in the engineering industry; experience in higher education or teaching is preferred. Other Requirements • Please submit a 2–5 minute video response summarizing your qualifications, interest in the position and reason you feel you would be the right fit to careers@chattanoogacollege.edu., • Applications that do not include the required materials will not be reviewed. Equal Employment Opportunity Statement Chattanooga College MDTC is an Equal Opportunity Employer. We are committed to fostering an inclusive and diverse workplace. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, veteran status, or any other legally protected characteristic, in accordance with applicable federal, state, and local laws. Chattanooga College MDTC encourages applications from individuals of all backgrounds and experiences and is dedicated to providing equal access to employment opportunities. PI6b24a9074278-25405-40868515

Position Title Adjunct Faculty – Engineering Description At Chattanooga College MDTC, the Adjunct Faculty – Engineering will help implement our strategy of “Where a small school can make a BIG difference!!”. The Adjunct Faculty – Engineering will provide high-quality instruction and academic support to engineering students to support student success, retention, and workforce readiness. This includes responsibilities such as delivering course content, facilitating lab activities, and assessing student learning outcomes. Ideal candidates must have excellent interpersonal, communication, problem-solving, and listening skills. Candidates must be able to adapt to a fast-paced work environment and manage multiple priorities and changing assignments. This is an instructional position supporting the Engineering Department. This role requires considerable interaction with students and faculty through individual meetings, group sessions, and/or events. Adjunct Faculty are expected to possess extensive knowledge of engineering principles, mathematics, and industry-standard software. They must be able to interpret individual needs, provide personalized support, and work effectively with individuals who may be confused, stressed, or demanding. Employees in this role can expect to support individuals regarding academic plans, progress, and career goals , assist with decision-making related to educational and institutional processes , and help guide individuals toward successful outcomes. This position requires maintaining confidentiality and accurate records to ensure compliance with accreditation standards, institutional policies, and federal regulations (e.g., FERPA, as applicable). The role may also support institutional events such as Orientation, Graduation, or engineering competitions. A strong commitment to equity, access, and success for underrepresented or at-risk populations is essential. Responsibilities • Provides instructional support to a diverse population of engineering students, including regular contact regarding progress and performance., • Implements institutional or departmental strategic priorities related to student retention and engagement., • Counsels, advises, or supports individuals through individual and group sessions to address concerns and provide guidance., • Educates individuals on institutional resources, policies, procedures, and expectations., • Implements solutions, including technology, to promote efficiency, access, and success., • Completes required professional development and training annually., • Supports department-wide and student services initiatives., • Maintains accurate documentation and records in compliance with institutional, accreditation, and federal requirements., • Collaborates with departments and colleagues to increase engagement, retention, and success, especially for at-risk populations., • Provides appropriate referrals for personal, social, and/or academic concerns that may impair success., • Upholds confidentiality and complies with institutional policies, accreditation standards, and federal regulations., • Assists with planning and coordination of events such as workshops or career fairs., • Maintains tools, systems, or resources necessary to effectively perform job duties., • Remains current on relevant state and federal guidelines, emerging best practices, and research related to the role., • Collaborates with the Department Leadership., • Please note: This job description is not exhaustive, and additional duties may be assigned as needed. Skills • Strong interpersonal, communication, and public presentation skills., • Ability to establish and maintain effective working relationships with students, faculty, staff, and external partners., • Ability to communicate clearly and professionally in verbal and written formats., • Knowledge of the role’s function in supporting learning, access, and success., • Ability to use technology to support services, including Microsoft Office, learning management systems (LMS), and engineering software (e.g., AutoCAD, MATLAB, or SolidWorks). Education & Experience • Education or Training:, • Bachelor’s degree with a Professional Engineer (PE) license required, • Master’s degree in Engineering (Mechanical, Civil, Electrical, or related field) preferred, • Experience:, • A minimum of four (4) years of experience in the engineering industry; experience in higher education or teaching is preferred. Other Requirements • Please submit a 2–5 minute video response summarizing your qualifications, interest in the position and reason you feel you would be the right fit to careers@chattanoogacollege.edu., • Applications that do not include the required materials will not be reviewed. Equal Employment Opportunity Statement Chattanooga College MDTC is an Equal Opportunity Employer. We are committed to fostering an inclusive and diverse workplace. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, veteran status, or any other legally protected characteristic, in accordance with applicable federal, state, and local laws. Chattanooga College MDTC encourages applications from individuals of all backgrounds and experiences and is dedicated to providing equal access to employment opportunities. PI9cb21cbf672c-37344-40868515