Trabajos solidworks en Austin, TexasCrear alertas

Job Title: Principal Mechanical Design Engineer Job Family: Mechanical Design Engineering Organization: Data Center Infrastructure Team Location: Remote* OR Austin, TX *Requires up to 20% domestic and/or international travel (rare) How will you make an impact? We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards. What will you do? Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications. Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems. Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure. Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS). Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads. Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability. Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection. Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability. Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements. Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts Select appropriate materials and fabrication methods to optimize cost, performance, and reliability Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components. Lead mechanical design reviews and contribute to cross-functional design validation efforts. Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs). Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization. Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met. Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing. Conduct root cause analysis and corrective actions for mechanical failures or field issues. Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers). Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH) May perform other duties and responsibilities as assigned How will you get here? Education: Bachelor’s Degree in Mechanical Engineering or related engineering discipline. Experience: 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment. Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus). Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required Excellent communication and cross-functional collaboration skills Knowledge, Skills, Abilities: Excellent interpersonal and communication skills Creative, self-motivated, accountable, and team-oriented Able to work independently with minimal oversight Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations Skilled in writing reports, business correspondence, and procedural guides Effective at presenting information and responding to management, clients, and public queries Capable of influencing others and sharing best practices Comfortable working as part of a global team Capable of assessing projects, articulating risks, and developing project milestones Familiar with stage-gate processes in project lifecycle management (PLCM) Able to mentor less experienced engineers Ability to travel both domestically and internationally up to 30% Preferred Qualifications: Master’s Degree in Mechanical Engineering Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products. Active Professional Engineer (PE) license. Knowledge of regulatory and safety standards applicable to data center infrastructure. Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus

🚀 We’re Hiring: Senior Industrial Automation Engineer | Austin, TX We are looking for an experienced Senior Industrial Automation Engineer to design, build, and optimize advanced automated manufacturing systems in a high-volume electronics production environment based in Austin. This is a hands-on, cross-functional role ideal for someone who thrives at the intersection of controls, mechanical design, and manufacturing systems. 🔧 Key Responsibilities: • Design, develop, and deploy automated production systems (PLC, HMI, motion control, robotics), • Program and troubleshoot PLCs (Allen-Bradley / Siemens / Mitsubishi), • Develop and maintain HMI/SCADA systems, • Design mechanical fixtures, tooling, and automation equipment using SolidWorks, • Diagnose and resolve complex electromechanical issues on production lines, • Drive continuous improvement (cycle time, yield, uptime, OEE), • Collaborate with electrical, mechanical, and process engineering teams, • Support New Product Introduction (NPI) and scale-up into manufacturing 🎯 Required Qualifications: • Bachelor’s degree in Electrical, Mechanical, or Mechatronics Engineering, • 7+ years of industrial automation experience in a manufacturing environment, • Strong PLC programming experience (Allen Bradley / Siemens / Mitsubishi / ABB/ Schneider Electric), • Vision System : Cognex / Keyence, • Experience with HMI/SCADA platforms, • Hands-on mechanical design experience using SolidWorks (fixtures, tooling, automation layouts), • Experience with electronics manufacturing processes (SMT, PCBA, testing), • Strong troubleshooting skills across electrical, mechanical, and software systems ➕ Nice to Have: • Vision systems (Cognex, Keyence), • Robotics integration (Fanuc, ABB, UR), • MES or Industry 4.0/data integration experience 💡 What’s in it for you: • Opportunity to work on complex, high-impact automation systems, • Ownership from concept through deployment, • Fast-paced, engineering-driven environment with real manufacturing impact

Job Title: Principal Mechanical Design Engineer Job Family: Mechanical Design Engineering Organization: Data Center Infrastructure Team Location: Remote* OR Austin, TX *Requires up to 20% domestic and/or international travel (rare) How will you make an impact? We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards. What will you do? Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications. Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems. Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure. Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS). Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads. Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability. Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection. Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability. Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements. Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts Select appropriate materials and fabrication methods to optimize cost, performance, and reliability Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components. Lead mechanical design reviews and contribute to cross-functional design validation efforts. Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs). Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization. Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met. Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing. Conduct root cause analysis and corrective actions for mechanical failures or field issues. Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers). Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH) May perform other duties and responsibilities as assigned How will you get here? Education: Bachelor’s Degree in Mechanical Engineering or related engineering discipline. Experience: 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment. Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus). Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required Excellent communication and cross-functional collaboration skills Knowledge, Skills, Abilities: Excellent interpersonal and communication skills Creative, self-motivated, accountable, and team-oriented Able to work independently with minimal oversight Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations Skilled in writing reports, business correspondence, and procedural guides Effective at presenting information and responding to management, clients, and public queries Capable of influencing others and sharing best practices Comfortable working as part of a global team Capable of assessing projects, articulating risks, and developing project milestones Familiar with stage-gate processes in project lifecycle management (PLCM) Able to mentor less experienced engineers Ability to travel both domestically and internationally up to 30% Preferred Qualifications: Master’s Degree in Mechanical Engineering Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products. Active Professional Engineer (PE) license. Knowledge of regulatory and safety standards applicable to data center infrastructure. Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus

About Revolution Space At Revolution Space we're building advanced space systems for the 21st century. Every employee at Revolution Space works on projects that are critical to our company’s future by ensuring our products work on orbit every time. Position Summary: Revolution Space is seeking an experienced senior level test engineer (minimum of 15-year experience) to support critical testing activities on deliverable spacecraft hardware. Duties will include test development, oversight, design, planning and operation. This role is crucial to the successful and timely development of our propulsion system products. Ideally, each candidate has experience with harsh environment testing: more specifically aerospace related testing. A strong emphasis will be on documentation including procedure development and data collection. This role also involves operating tests and data collection. Nearly all work involves advanced aerospace technologies such as vacuum chambers, ion beams and radiation hardened high voltage electronics. The position is full-time, on-site in Boston, Maryland, or remote, and available to be filled immediately. Responsibilities: Creating robust test plans including verification and validation tables Test procedure development for various types of tests Test design for critical flight hardware Oversight of complex, aerospace, environmental, vacuum and R&D testing Test operation and data collection Support of troubleshooting activities Test station support such as build-up, calibration, purchasing and maintenance Documentation of key activities such as test reports, quality control and failures Some oversight of test personnel Required Qualifications Bachelor's degree in a technical field. 15 years integration and test or systems engineering experience Experience with standard lab equipment such as power supplies, oscilloscopes, multimeters, signal generators, thermocouples/temp sensors Experience with qualification and acceptance testing of hardware products Experience with operating and troubleshooting embedded software systems Experience with environmental testing Experience in procedure development Experience working with ESD sensitive hardware Strong written and oral communication skills Proficiency with MS Word & Excel Preferred Qualifications Master’s degree in a technical field. 20+ years of aerospace testing experience Vacuum chamber experience (<1 micro-Torr pressures) Experience with HiPot testers, current probes, temperature meters Experience working in cleanroom environments Aerospace environmental testing Environmental testing experience for harsh environments such as vibration, radiation, shock, thermal, humidity High voltage (up to 5 kV) rated equipment Familiarity with operating and troubleshooting embedded software systems Automated test equipment and data acquisition Experience with any of the following: Labview, Matlab, Python, Altium, SolidWorks, AutoCAD Benefits Paid holidays, sick time and unmetered vacation Excellent health and dental plans with 80% employer contribution 100% company matching 401k plan with immediate vesting Life Insurance Long term / short term disability Education assistance To conform to U.S. Government space technology export regulations, applicants must be U.S. citizens, lawful permanents residents of the U.S., or protected individuals as defined by 8 U.S.C. 1324b(a)(3). All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or any other protected factor.

OUR MISSION Generate is a Boston-based MIT-spin off technology company with the mission to digitize one of the world’s largest and least digital industries: the 12-trillion-dollar Architecture, Engineering, and Construction (AEC) sector. We are bringing the many innovations and techniques from state-of-the-art gaming technology (like Proceduralism, GPGPU, Real-Time Graphics, and more) into transforming how the AEC sector designs and builds. When implemented at scale, our technology can help tackle the global climate and housing crises by accelerating the deployment of cost-effective, sustainable building materials and systems. Our team is seeking an experienced Unreal Engine C++ Software Engineer to develop and deploy the technology at scale. YOUR ROLE In this role, you will: • Work as part of a small development team in a lean engineering environment on incremental releases of design software with a planned public launch in Q4 2022. You will make significant contributions to the software's structure and features with a laser focus on providing a fluid, game-like, user-centric design experience., • Contribute to significant aspects of the product development process — data structures, algorithm design, computational geometry, procedural geometry generation, history systems, inferencing and constraint systems, and building information modeling systems, runtime procedural construction system generation, runtime procedural building facades and interiors, custom compute based rasterization in Unreal Engine, and Houdini-esque building design tools., • Contribute expertise and intuition to monthly feature development workshops, bi-weekly sprint planning meetings, and quick daily standups., • Engage in open-ended workshop sessions, to help the product get from "a user wants to do X" to "here is how we will implement X, given our product architecture.", • Collaborate with our small, cross-functional team of game developers, architects, and product designers to develop innovative solutions to creating and generating buildings (walls, floors, windows, doors, beams, columns, furniture, etc.). REQUIREMENTS • Deep, intuitive understanding of Unreal Engine 4 (mandatory)., • Deep, intuitive understanding of C++ and modern software design principles., • Track record in the software, technology, or game industries., • Experience building and shipping successful games or products., • Comfort with the lean product development process in a startup environment: including regular pivots, difficult choices about resource prioritization, and an emphasis on product-market fit., • A drive to understand and solve complex problems with novel, creative, and practical solutions., • Self-motivated and a self-starter., • Excellent communication and collaboration skills, both virtually and in person., • Familiarity with version control (We use Git)., • Operate in a workplace environment conducive to the respectful debate of ideas and opinions. Our team has incredible talent, and our technology will only become better if everyone gets to respectfully challenge each other's ideas to arrive at the best possible solution., • Most importantly, treat team members kindly—kindness is contagious, and nobody should feel disrespected in an intrinsically stressful technology-development environment. NICE TO HAVES • Experience with computational and procedural mesh geometry., • Previous development of user-facing tools or desktop software., • CAD industry experience (Autodesk, Dassault, OnShape, SolidWorks, etc.)., • Architecture, Engineering, and Construction (AEC) industry experience., • With JavaScript systems (Redux, React, TypeScript, Next.js, etc.)., • Experience with networked systems, distributed data, CRDT, or collaborative editing. Please include links to any representative code or portfolio samples you can share (Github, Bitbucket, tools, games, apps, etc.) in the "Experience Summary" section of the application. We would prefer candidates in the US, but are eager to talk to anyone with a track record in the game development space and making great software. Generate is remote work first, but we are also willing to discuss relocation to Boston, Massachusetts: a global epicenter of technological innovation! We are proud to be an equal opportunity employer and welcome applicants from all backgrounds, including those from historically underrepresented communities. We are committed to reflecting the values of diversity, equity, and inclusion, both in the workplace and in the products we deliver to the industry. We are excited to hear from you!

Rivers Agile is a deep tech consulting firm specializing in custom solutions across various industries. Founded in 2008 as a quality assurance consultancy, we have expanded our expertise to include autonomous solutions, Agentive AI, and XR research. Our strong foundation in quality assurance ensures efficient, agile software development while aligning every solution with business goals. Our collaborative team of software engineers, QA engineers, and project managers partners closely with clients to tackle complex challenges. We seek engineers who are lifelong learners, passionate about their craft, and defined by their unique personality, experience, and style. Location: This is primarily an onsite position in the northern Pittsburgh metro area. Candidates must be local or willing to relocate. What you’ll do • Design and execute reliability test plans for mechanical and electro-mechanical systems, including cyclic testing of sub system components., • Analyze complex systems and breaking testing down into subsystem components for effective testing, • Accelerated lifecycle testing to evaluate life expectancy of mechanical components, • Predictive analytics to determine preventive maintenance schedules, • Specify, develop, or guide the fabrication of custom test fixtures using internal teams or external vendors (e.g., CNC machining, weld fabrication)., • Automating tests and collecting results for analysis through scripting or other means, • Ability to read electrical and mechanical drawings, • Statistical analysis and data interpretation, • Able to work independently and make decisions with limited supervision, • Advanced troubleshooting experience, • Collaborate with design, electrical, and systems engineering teams to support product reliability efforts.Qualifications, • Bachelor’s degree (or higher) in Mechanical Engineering or a related discipline., • 5-7 years of experience in reliability testing, mechanical validation, or test engineering., • Experience in complex electro/mechanical systems i.e. AGVs, AMRs, robotics, • Experience with reliability techniques i.e. FMEA, RCA, FTA, DoE, DMAIC, • Familiarity with mechanical fixture design, structural analysis, or test automation., • Experience with reliability methodologies such as Design for Six Sigma (DFSS), Six Sigma, or Lean., • Proficient in data analysis and statistical methods to interpret test results and failure patterns., • Understanding industrial hardware and component manufacturing processes., • Experience with CAD software (e.g., SolidWorks, AutoCAD, AutoDesk), • Familiarity with electrical or control systems integration is a plus., • Experience with reliability analysis software i.e. Minitab, JMP Nice-to-Have Skills:, • Experience inspecting hydraulic or pneumatic components (e.g., cylinders) under magnification., • Understanding of test fixture ergonomics, mobility within a facility, and adaptability to various environmental constraints., • Knowledge of electro-mechanical systems or basic electrical diagnostics. Package: salaried position, bonus program, full benefits (medical, dental, vision, supplementary), holidays, paid time off, paid parental leave, 401(k) plan, good work-life balance, and work-from-home options.

Epirus is a high-growth technology company dedicated to overcoming the asymmetric challenges inherent to the future of national security. Epirus' flagship product, Leonidas, is a software-defined system built using intelligent power management techniques that allow power-hungry systems to do more with less. Job Summary: We are seeking a Senior Interactive Simulation Developer to lead the development of an immersive simulation environment for mission planning, training, UI/UX testing, and more. The ideal candidate will have a proven track record in developing high-quality products and simulations, particularly in Unreal Engine. As a senior team member, you will oversee the technical development, guide the project, and shape the simulation roadmap. • Interpret electrical schematics, wiring diagrams, and harness drawings to independently build and troubleshoot complex harness assemblies., • Manufacture prototype and production harnesses—including shielded, twisted pair, coaxial, high-voltage, and multi-branch—following Epirus work instructions and prescribed standards., • Install, route, and rework harnesses within mechanical assemblies, enclosures, and vehicles., • Perform continuity, resistance, insulation, and functional testing using multimeters, oscilloscopes, hipot testers, and network analyzers or other specialized in process equipment., • Setup and operate crimping tools (manual, pneumatic, and hydraulic) to perform precision crimps on a variety of contacts and terminals per IPC/WHMA-A-620 and MIL-spec standards., • Inspect and verify crimp quality using pull testing, crimp micrometers, and visual inspection under magnification., • Support First Article Inspection (FAI), development builds, rapid prototyping, and final acceptance of electrical harnesses., • Ensure workmanship quality, maintain build traceability, and uphold zero-defect standards through proper documentation and process control., • Collaborate with production, test, and quality teams to resolve build issues and implement corrective actions., • Mentor and train Junior Harnessing Technicians., • Maintain accurate records of builds, rework, and inspections in accordance with AS9100 and ISO9001 quality standards., • 5+ years of hands-on experience building aerospace/defense or high-reliability electrical harness assemblies., • Expert knowledge of hand tools and equipment used for crimping, stripping, cutting, and soldering., • Strong soldering skills. Ability to hand solder lap and lash splices, and fine pitch soldering cups., • Strong understanding of IPC/WHMA-A-620 standards, J-STD-001, and NASA workmanship standards., • Ability to read and interpret complex electrical and mechanical drawings, BOMs, and manufacturing plans., • Proficient with test equipment such as multimeters, hipot testers, and oscilloscopes., • Proven track record of building complex harnesses., • Comfortable in a fast-paced, iterative, and high-standards environment., • Minimum 8+ years' experience as a technician in defense, aerospace, or equivalent high‐reliability field, • Certified to J-STD-100, IPC-620, and IPC-610 or NASA STD8739.4, • Strong knowledge and experience in manufacturing, troubleshooting, testing, rework and repair of harnessing, • Experience with connectors (e.g., D38999, Glenair, Micro-D, Nano-D, MIL-spec coax)., • Familiarity with spacecraft, UAV, missile, or ground combat system harnessing practices., • Experience with cleanroom protocols and ESD-safe practices, • Experience with PLM and MES systems such as Oracle, Epicor, Ion, JIRA etc., • Ability to support light CAD work for layout and harness routing (SolidWorks Electrical, E3, or similar)., • May be to retain a TS Clearance ITAR REQUIREMENTS: • To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR _. At Epirus, you’ll work with technical peers and great people—and get first crack at some of the defining technology challenges of our time. Here, “impossible” is just a challenge. We're a diverse, fast-growing team of change-makers fueling the future of energy with revolutionary solutions. _ As required by the Equal Pay Transparency Act, Epirus provides a reasonable range of minimum compensation for roles that may be hired. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and specific office location. For the state of California only, the range of starting pay for this role is:$76,500—$96,900 USD

Job Description Company Overview Allen Control Systems (ACS) is a cutting-edge defense startup, founded by two ex-Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders' successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. Position Overview: As the Manufacturing Engineering Manager, your primary mission is to own the physical realization of our autonomous defense systems. You will bridge the gap between engineering R&D and the factory floor, ensuring our mission-critical products are built with precision, efficiency, and scale. This role requires a hands-on leader who thrives in an "engineering-first" culture and possesses the technical grit to build out production lines for complex, ruggedized robotics. What You'll Do: Lead & Scale the Team: Manage, mentor, and grow a high-performing team of manufacturing and industrial engineers. Foster a culture of technical excellence and accountability. Build & Optimize the Line: Lead the design and setup of assembly stations, production layouts, and material flow. Determine the specialized tools, jigs, and fixtures required for repeatable manufacturing. Drive Process Excellence: Champion Lean manufacturing principles and DFM initiatives. Analyze production data to identify bottlenecks and implement physical solutions to increase throughput. Bridge the Gap: Serve as the primary link between Design Engineering and Production. Translate complex blueprints into clear, step-by-step manufacturing instructions and SOPs. Equipment Ownership: Oversee the selection and implementation of manufacturing hardware, from precision hand tools to advanced automated assembly systems. Project Execution: Own the manufacturing roadmap from prototype to full-scale deployment, managing budgets and ensuring production milestones are met on schedule. What You'll Need: Education: Bachelor’s degree in Manufacturing Engineering, Mechanical Engineering, or a related technical field. Relevant Experience: 7+ years of professional engineering experience, with at least 3+ years in a leadership or management role. Industry Background: Experience in defense, robotics, aerospace, or a similarly complex electromechanical manufacturing environment. Technical Proficiency: Comfortable reviewing CAD models (SolidWorks, CREO, etc.) and deep knowledge of plant layout and value stream mapping. Adaptability: Experience building or scaling manufacturing teams in a fast-paced startup environment where technical challenges are frequent. What We Offer: Competitive salary ACS Equity Package Health, Dental, and Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #LI-AS1 #ZR

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior Mechanical Engineer I to our Mechanical Engineering team. If you enjoy working in a startup environment and are passionate about developing space hardware for leading-edge communications satellites, we would like to hear from you. In this position, you will be responsible for mechanical design aspects of Cesium phased array antennas, subsystems, and interfaces through all phases of the development process. The ideal candidate will be versatile and proficient in mechanical analysis, electronics packaging, computer-aided design (CAD), mechanical interfaces, thermal architecture, spacecraft propulsion, deployable and actuated structures, and environmental qualification of spacecraft antennas and payloads. You will be responsible for mechanical designs from concept through space flight including requirements definition, architecture trades and block diagrams, analysis, manufacturing, testing, qualification, and in-orbit support. The successful candidate will also present engineering design review materials to our customers and executive team, as well as participate in proposal-writing efforts. As such, excellent written and verbal communication skills are required. JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS • Bachelor of Science (BS) in Mechanical or Aerospace Engineering from an accredited university or institution, • Minimum of 4 years of experience in space antenna and payload mechanical engineering to include electronics packaging, thermal, shock, vibration, stress dynamics, and cost. A Master's degree may count as two years of experience., • Experience in conducting architectural trade studies including parametric and first-order cost and physical analysis, • Experience with professional mechanical and FEA CAD tools, such as Ansys Mechanical, SolidWorks Simulation, and Thermal Desktop, • Experience with CNC manufacturing and GD&T, • Experience with advanced aerospace manufacturing and materials including sandwich panels and carbon composites, OR experience with high-reliability deployment mechanisms for space applications (including deployment, HDRMs, power delivery, etc.)., • Proficiency in detailed mechanical design (3D CAD, drawings, etc.), • Experience designing and manufacturing mechanisms and mechanical actuators, • Experience with EMI/EMC mitigation techniques, • Familiarity with satellite thermal architectures including heat pipes, phase change materials, contact resistance, and surface finishes as well as fundamental understandings of orbital thermal control in a LEO environment., • Familiarity with launch and LEO environments (thermal, shock, vibe, radiation, etc), • Familiarity with design for test, manufacturability, assembly, and reliability, • Excellent written and verbal communication skills PREFERRED EXPERIENCE, • Python, C++, or other programming languages, • Experience with large, deployable antenna arrays which drive your vision for the next generation of on-orbit communications and sensor arrays., • Robotics and control systems experience, • PCBA experience.CesiumAstro considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate’s work experience, education/training, and key skills. Full-time employment offers include company stock options and a generous benefits package including health, dental, vision, HSA, FSA, life, disability and retirement plans. CesiumAstro is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. Please note: CesiumAstro does not accept unsolicited resumes from contract agencies or search firms. Any unsolicited resumes submitted to our website or to CesiumAstro team members will be considered property of CesiumAstro, and we will not be obligated to pay any referral fees. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionStaff Engineer – Hydraulics (Advanced Mechanical Systems) Austin, Texas, USA Industry: Industrial Equipment Manufacturing | Fluid Handling Systems | Automated Metering & Hydraulic Solutions About the Role We are seeking a Staff Engineer specializing in Hydraulics to join a leading company in the industrial fluid systems and automated metering sector. This role is ideal for an experienced mechanical or hydraulic engineering professional with deep expertise in fluid systems, mechanical design, and product development. You will play a key role in both new product development and sustaining engineering, supporting manufacturing and production teams to ensure high performance, reliability, and manufacturability of complex hydraulic systems. This position also includes occasional travel to manufacturing sites and customer locations to support product deployment, troubleshooting, and field performance optimization. Key Responsibilities • Design, develop, and document new hydraulic components and modules using 3D CAD software, • Perform performance analysis focused on flow, pressure, and system accuracy optimization, • Select materials suitable for various fluids and demanding operating environments, • Build, assemble, and test prototype components; conduct calibration and pressure testing, • Collaborate with manufacturing and production teams to improve design for manufacturability, • Create technical documentation including BOMs and engineering change orders (ECOs), • Support field service teams in troubleshooting and resolving customer site issues, • Develop and execute design verification testing methods; review test results for compliance, • Ensure designs meet relevant environmental and regulatory requirements Candidate Profile & Qualifications, • Bachelor’s degree in Engineering (Mechanical Engineering preferred), • Strong experience with fluid handling components, including cast metal parts (sand cast and die cast aluminum, grey iron), • Solid understanding of fluid dynamics, material science, and pressure vessel design principles, • Experience selecting and sizing pumps, motors, valves, and filters, • Familiarity with fabricated sheet metal, machined parts (aluminum, steel, plastic), and injection molded/elastomer components, • Proficiency in 3D CAD software (SolidWorks preferred), • Strong skills in Microsoft Office (Excel, Word, PowerPoint), • Experience with electronic integration in hydraulic/mechanical systems Nice to Have, • Prior experience in a manufacturing or industrial production environment, • Hands-on experience in machine shop or experimental prototype environments, • Exposure to cross-functional engineering design teams Key Attributes, • Strong customer-focused mindset, • Engineering leadership and ownership mentality, • Ability to work independently with limited supervision, • Comfortable managing multiple priorities in a fast-paced environment, • Collaborative and solution-oriented approach to engineering challenges You should be proficient in: • CAD Software, • Hydraulic Systems & Components

Job Description Position Summary At UPLIFT Desk, we’re not just building ergonomic workstations—we’re shaping how people work and live. As the ecommerce industry leader in height-adjustable desks, we’ve grown by delivering innovative, customer-focused solutions that promote health, productivity, and well-being. Our success is rooted in our core values: Customer Obsession, Innovation, Accountability, and Results Oriented. UPLIFT Desk is seeking an Acoustics Product Designer to lead the design and development of our acoustic product line. This role is responsible for creating functional, manufacturable, and visually cohesive sound-absorbing solutions that enhance modern workspaces. You will own the full design lifecycle from concept through production, combining strong industrial design expertise with a deep understanding of acoustic performance, materials, and manufacturability. Portfolio required with application. What You'll Bring 5+ years of product design experience, with a focus on acoustic products or similar categories Strong proficiency in SolidWorks and visualization tools (KeyShot, Adobe Creative Suite) Solid understanding of acoustic principles, including sound absorption and diffusion Experience designing for manufacturing, including materials, cost, and scalability considerations Portfolio demonstrating strong design thinking, material exploration, and execution Bonus Points For Experience designing modular systems or workspace products Knowledge of sustainable or recycled materials (e.g., PET felt, acoustic composites) Experience working with global manufacturers or suppliers Familiarity with installation systems or hardware design Awareness of workplace or interior design trends Experience with acoustic panels, architectural systems, or furniture preferred What You’ll Do Lead the design and development of acoustic products from concept through production Define and evolve the design language of the acoustic product line Create 3D models, prototypes, and production-ready designs Research and test materials for acoustic performance, durability, and cost Design modular and user-friendly installation systems Ensure products meet structural, manufacturing, and cost requirements Collaborate with cross-functional teams including engineering and sourcing Identify and evaluate manufacturing partners Monitor market trends and competitor products to inform and evolve product strategy Deliver production-ready CAD and engineering documentation Benefits A merit-based environment that rewards growth and accomplishment regardless of seniority Generous paid time off 4% 401K company matching with instant vesting (after one year) Excellent group health insurance available to employees and dependents, including domestic partners (medical plan, 2 dental plans, and a vision plan to choose from) Flexible spending account (FSA) for health care and child care costs Company-paid & Supplementary Life Insurance; Long-term & Short-term disability Free UPLIFT Desk (after one year) 50% discount on all UPLIFT products Free healthy (and not so healthy) snacks and drinks On-the-job training and skills development A supportive and engaging work culture that promotes healthy living Position Details Compensation: $90,000+ DOE Type: Full-time Employee Status: Regular Work Schedule: Monday - Friday, 8am-5pm, 40 hours per week Location: Austin, Texas About UPLIFT Desk As a fast growing, mid-sized Direct To Consumer (DTC) brand company, it’s our mission to deliver sincere, world-class customer service. We provide optimally designed, quality office solutions to customers. We focus on happier & healthier customers and employees! UPLIFT Desk has revolutionized the way people shop for office furniture. It all starts with our award winning UPLIFT Standing Desk, made even better when accessorized with our entire UPLIFT office furniture line. Our product line includes most furniture an office could need. We design office products that optimize customers’ comfort, health, and productivity. Our Product Development team focuses on designing the highest quality ergonomic office furniture. Then our Content team's ecommerce website offers customers the ability to configure products specifically to their needs. Our amazing Order Processing and Warehouse teams make sure we have inventory and ship orders the same day. Customers receive award winning support from our Sales and Customer Service and Warranty teams. We offer the best 15 year warranty in the business! Our Interior Design and Contract Sales teams specialize in large office furniture layouts for commercial buildings that serve most Fortune 500 companies. Award winning UPLIFT Desk is loved globally! Rated Best Standing Desk by New York Times Wirecutter 9 years in a row Hundreds of thousands of happy customers around the world sit and stand at an UPLIFT Desk Google reviews - 4.9 rating with thousands of reviews We value our environment: We plant 5 new trees in U.S. National Forests for every solid wood desk sold. By partnering with the National Forest Foundation, we're able to plant tens of thousands of new trees each year Solar powered operations: Our Austin facilities produce over a megawatt of electricity through roof-mounted solar panels on three large warehouses We use sustainable materials in our products. Some examples are: Bamboo Desktops, Drawers, & Motion Boards: The world's fastest-growing plant, Moso bamboo is a grass that grows as quickly as an inch an hour Eco Curve Desktops: Eco Curve desktops use 100% recycled MDF and have the lowest carbon footprint in the industry due to not using edgebanding, backer boards, adhesives, or solvents Rubberwood Desktops: Pará rubber trees produce 99% of the world's natural rubber latex. The rubber production lifespan of these trees is exhausted after about 25-30 years. Our rubberwood desktops give the trees a second life Equal Opportunity Employer (EEO) UPLIFT Desk believes in building an organization whose staff reflects the true diversity of our community. We hire, promote, and reward employees based on results and professional performance. UPLIFT Desk provides equal employment opportunities to all employees and applicants without regard to religion, sex, age, sexual orientation, gender identity, race, creed, color, national origin, alienage or citizenship status, marital status, partnership status, ancestry, disability, or veteran status. To all recruitment agencies: We do not accept agency resumes. UPLIFT Desk is not responsible for any fees related to unsolicited resumes. #UPDHP

Preferred SkillsExisting experience with 3D CAD modeling such as SOLIDWORKS is preferred. ResponsibilitiesCreate and deliver compelling product demonstrations for our software solutions like SOLIDWORKS, PDM, Simulation, 3DEXPERIENCE, and CAM. Actively participate in SOLIDWORKS Rollout events, trades

Job Description Mechanical Engineer Interested in getting in at the ground floor of a new, disruptive company attacking an important multi-billion-dollar problem? Businesses and consumers continue to demand increasing data services at an exponential rate -- streaming, deep learning, analytics, loT connectivity, and more. What this means is higher performing CPUs, components, servers and ultimately Data and Edge computing centers, all generating excessive heat that is increasingly difficult to manage with traditional cooling systems. Accelsius is developing revolutionary direct-to-chip, 2-Phase cooling technologies that empower and enable Server OEMs, Data Centers, Edge Computing Operators, and 5G Edge deployments to meet performance, sustainability, scale, and cost goals while serving this high-growth market for data services. Accelsius is looking for a Mechanical Engineer to help create leading-edge cooling solutions for the computer industry. This role will include the design and creation of cooling system assemblies, focusing on evaporator plates used in 2-phase cooling applications. This position will report directly to the VP of Engineering and the right candidate will enjoy the freedom to design/develop novel products, with the ability to greatly influence the overall company roadmap. Role Responsibilities: • Develop cold plates and other assemblies for 2-phase cooling solutions, • Perform FEA on assemblies to confirm performance and suitability for enterprise data center applications, • Assist in validating thermal and mechanical performance, and directing testing and test requirements as needed, • Work with other engineers to ensure compatibility with designed assemblies in the greater cooling system, including generating specifications and assisting in design reviews, • Create drawings required for manufacturing and other documentation (user guides, service manuals) Qualifications for this role include: • B.S. or higher degree in Mechanical Engineering, • 5 years of experience with progressively increasing responsibility, • Sheet metal and chassis experience preferred, • Thermal engineering experience preferred, with experience in 2-phase cooling technologies, • Strong mechanical design and integration skills using modern 3D modeling tools, • Strong FEA capability, • Ability to lead mechanical developments from concept to release, • Experience using SolidWorks, • Preferred experience with cold-plate design for modern processors/GPUs or other similar power electronics, • An Agile, team player, • Startup experience is a plus Accelsius offers a competitive salary with stock options, a full range of benefits including medical and dental, 401K, and unlimited PTO. The position is based in Austin, Texas. Accelsius does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, veteran status, marital status, or based on an individual's status in any group or class protected by applicable federal, state or local law. Accelsius encourages applications from minorities, women, the disabled, protected veterans and all other qualified applicants.

Job DescriptionDescription: We are seeking a motivated Applications Engineer to support our Skidded Solutions (liquid-filled medium voltage transformers, switchgear cabinets, inverters) in the solar and energy storage industries. The Applications Engineer will be responsible for interfacing with Customers (current and potential) in an effort to achieve revenue growth and customer acquisition objectives set forth by the Company. The Applications Engineer will review customer specifications, assist in determining and understanding client equipment needs, generate quotes, and engage in follow up conversations with the customer regarding open opportunities. The ideal candidate will possess strong technical expertise in mechanical design and practical integration, focusing on the design, optimization, and mechanical integration of structural skids with transformers and switchgear. The candidate will collaborate with cross-functional teams to develop solutions that meet customer requirements, industry standards, and regulatory compliance. This role involves working closely with sales, product management, design engineering, and customers to ensure optimal performance, reliability, and cost-effectiveness. Key Responsibilities: Technical Expertise: • Serve as a technical resource on the mechanical integration and optimization of skidded liquid-filled medium voltage transformers, switchgear cabinets and inverters for solar and energy storage applications., • Provide technical guidance on product selection, specifications, and customization to meet customer requirements., • Analyze technical problems and recommend solutions. Customer Support: • Work directly with customers to understand their needs, address inquiries, and recommend appropriate integrated design solutions., • Prepare and deliver technical presentations and proposals, including customer-facing quotes in support of the sales process., • Support sales with technical training and customer visits. Application Engineering: • Interpret customer specifications and industry standards to create accurate design requirements., • Collaborate with design engineering and manufacturing teams to ensure products are readily manufacturable and meet performance, reliability, and cost targets., • Develop and maintain technical documentation, including drawings, manuals, and data sheets., • Identify value engineering opportunities within integrated designs to optimize cost and capability in support of customer needs Project Support: • Assist in managing multiple projects, ensuring timely delivery of proposals, designs, and support., • Coordinate with supply chain and production teams to address lead times and resource planning. Industry and Standards Compliance: • Stay current with industry standards, codes, and regulations such as IEEE, IEC, UL and ASCE., • Ensure products and applications comply with environmental and safety regulations. Qualifications: • Bachelor’s degree in Mechanical Engineering or a related field., • Minimum of 2–5 years of professional experience in application or mechanical design engineering, preferably with mechanical integration of electrical equipment, • Experience in the solar or energy storage industries is a plus., • Solid knowledge of mechanical design principles and design for manufacturability, • Familiarity with mechanical systems and pre-configured/skidded electromechanical assemblies, • Proficiency in Mechanical design software and tools – SolidWorks and/or AutoCAD; FEA modeling a plus · Electrical, Control systems and/or data acquisition & field monitoring proficiency a plus Soft Skills: • Strong communication and presentation skills., • Excellent problem-solving abilities and attention to detail., • Ability to work collaboratively in a cross-functional team environment. Certifications: • Professional Engineer (PE) license is a plus. Disclaimer: The statements above are intended to describe the general nature and level of work being performed. They are not an exhaustive list of all responsibilities, duties, or skills required. Forgent Power reserves the right to modify, interpret, or apply this job description as needed. Equal Employment Opportunity Statement: Forgent Power is an equal opportunity employer. We are committed to creating an inclusive environment for all employees. Employment decisions are made without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected class. #LI-DJ1 Requirements:

Job Description SALES ACCOUNT EXECUTIVE At CADimensions, we believe great sales is about more than closing deals — it's about building trusted partnerships and helping customers solve real challenges. Our Account Managers are at the forefront of that mission, connecting innovative technology with the people who need it most. We're looking for a driven, relationship-focused Account Manager to grow and manage a portfolio of customers, uncover new opportunities, and deliver solutions that create real impact. This role is perfect for someone who is curious, resilient, and motivated by both winning new business and helping customers succeed long-term. WHAT YOU WILL BE DOING: • Build and manage strong relationships within a defined set of accounts, serving as a trusted advisor to customers., • Prospect and generate new opportunities within existing accounts and targeted prospects., • Own the full sales cycle, including identifying opportunities, progressing deals, forecasting, and closing business., • Partner closely with customers to understand their needs and align solutions that drive value., • Maintain accurate and up-to-date activity, pipeline, and forecasting within HubSpot CRM., • Collaborate with internal teams (technical, marketing, and leadership) to deliver a seamless customer experience., • Continuously develop product knowledge, including certifications in Dassault Systèmes or other vendor solutions., • Stay proactive and persistent in follow-up to ensure opportunities move forward and customers stay engaged., • Contribute to team success by sharing insights, best practices, and supporting overall sales initiatives. WHAT YOU NEED TO BE SUCCESSFUL: • Bachelor's degree in Business, Engineering, or related field (or equivalent experience), • 2–3 years of sales experience, including prospecting and closing business, • Strong ability to build relationships and earn trust with customers, • Self-motivated with strong problem-solving and critical thinking skills, • Excellent communication, organization, and follow-through, • Ability to collaborate effectively across teams to drive results PREFERRED QUALIFICATIONS: • Experience selling CAD, engineering, or manufacturing solutions, • Familiarity with SOLIDWORKS or similar platforms, • Experience using HubSpot CRM, • Proven track record of generating pipeline and closing new business, • Experience with solution-based or consultative sales approaches PERKS OF WORKING AT CADIMENSIONS • Competitive Compensation: $50,000 – $60,000 base salary plus commission, • Health Benefits: Medical, dental, and vision coverage, including a medical plan option where CADimensions pays 100%., • 401(k) with Immediate Matching: Company match available with no waiting period, helping you start building for the future right away., • Generous Time Off: Paid time off to recharge that increase every year, plus dedicated paid volunteer time so you can give back to causes that matter to you., • Flexibility: Remote work environment with the ability to work where you're most productive., • Growth Opportunities: The chance to develop your technical and business systems expertise while working closely with teams across the organization., • Great Culture: A collaborative team environment recognized as a Great Place to Work, where people genuinely support each other and enjoy what they do. ABOUT US CADimensions, Inc. is the premier provider of innovative tools and solutions for the Engineering and Manufacturing community. We partner with industry leaders to offer state-of-the-art CAD software, 3D printing technologies, and comprehensive consulting services. Our mission is to empower our clients to bring their visions to life by enhancing efficiency and fostering creativity. Whether it's through advanced design services, cutting-edge additive manufacturing, or expert training and support, CADimensions is dedicated to driving success and innovation for our customers. Join us and be a part of a dynamic team that is shaping the future of engineering and manufacturing. Visit us at CADimensions to learn more about our products and services. EQUAL OPPORTUNITY EMPLOYER CADimensions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or any other legally protected characteristic.

Job Description Company Overview Allen Control Systems (ACS) is a cutting-edge defense startup founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing an autonomous gun turret using advanced computer vision and control systems to precisely detect, track, and neutralize enemy drones. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders’ successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. About The Role We are looking for an Associate Mechanical Engineer to join the ACS team and contribute to the design and development of our autonomous counter-drone platform. This is an early-career role well suited for a recent graduate or engineer with up to 2 years of experience who has a strong foundation in mechanical design, simulation, and electromechanical integration. You will work alongside senior engineers on real hardware that operates in demanding environments, learning fast and contributing from day one. What You’ll Do Support design and development of mechanical systems under MIL-STD-810 specifications, including robustness under vibration, shock, thermal, and environmental conditions. Run mechanical simulations including FEA, modal, vibration, and thermal analysis to assess durability and reliability of designs under operational stress. Collaborate with electrical and systems engineers to integrate electromechanical components including wiring harnesses, sensors, and actuators into mechanical structures. Support prototype development, testing, and validation; help develop and document mechanical design specifications, drawings, simulation reports, and test protocols. Participate in cross-functional design reviews, applying DFM and DFR principles and helping identify mechanical and electromechanical risks early in the development cycle. What You’ll Need Bachelor’s or Master’s degree in Mechanical Engineering or a related field. Proficiency in 3D CAD software such as SolidWorks (preferred), CATIA, or Creo; coursework or hands-on experience with FEA, modal, and thermal simulation tools such as ANSYS or SolidWorks Simulation. Foundational understanding of MIL-STD-810 requirements for mechanical durability including vibration, shock, temperature, and humidity testing. Interest in electromechanical integration and an eagerness to learn how mechanical structures interact with electrical systems such as sensors, actuators, and wiring harnesses. A passion for designing robust mechanical systems for harsh environments and a strong desire to work on hardware that has real-world defense impact. You’ll Stand Out Any direct exposure to MIL-STD-810 testing such as vibration, temperature, or shock, including through coursework, internships, or research projects. Familiarity with EMC considerations in mechanical design, or awareness of MIL-STD-461 and MIL-S-901D standards. Hands-on experience with rapid prototyping or additive manufacturing through personal projects, capstone work, or internships. Background or interest in fluid dynamics, heat transfer, or shock absorption systems. What We Offer Competitive salary ACS Equity Package Health, Dental, Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Staff Mechanical Design Engineer – Drone Defense Turret Systems Company Overview: Allen Control Systems (ACS) is a cutting-edge defense startup, founded by two ex-Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders' successful exits from two previous venture acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. Position Overview: We are looking for a highly experienced Mechanical Designer with strong expertise in mechanical simulations and electromechanical integration. The ideal candidate will be well-versed in designing for durability, reliability, and robustness according to MIL-STD-810 standards. You will play a critical role in ensuring our products meet stringent environmental, vibration, and shock requirements, while also integrating complex electromechanical components into our systems. What You'll Do: Design and develop mechanical systems that meet MIL-STD-810 specifications, ensuring robustness under vibration, shock, thermal, and environmental conditions. Perform mechanical simulations (FEA, modal, vibration, thermal) to assess the durability and reliability of designs under operational stress. Collaborate with electrical and systems engineers to integrate electromechanical components, ensuring seamless interaction between mechanical structures and electrical systems. Lead structural integrity testing and analysis, ensuring designs meet environmental test criteria for military-grade systems. Develop and document mechanical design specifications, including detailed drawings, simulation reports, and testing protocols. Conduct testing and validation to ensure that mechanical designs meet the required performance and safety standards. Support prototype development and work closely with manufacturing teams to ensure designs are feasible and cost-effective. Maintain a strong focus on product quality, safety, and reliability, adhering to Design for Manufacturing and Design for Reliability best practices. Contribute to cross-functional design reviews, identifying potential mechanical and electromechanical risks early in the development cycle. What You'll Need: A passion for designing robust mechanical systems that can operate in harsh environments. Previous robotics, robotics lab, medical robotics, or autonomy experience is required. 9+ years of experience in mechanical design, including expertise in electromechanical integration. Bachelor's or Master's degree in Mechanical Engineering or a related field. R&D experience Hands-on experience performing structural, vibration, and thermal simulations using tools such as ANSYS, SolidWorks (preferred). Proficient in 3D CAD software such as SolidWorks (preferred), CATIA, or Creo. Strong understanding of MIL-STD-810 requirements for mechanical durability, including vibration, shock, temperature, and humidity testing. Skilled in electromechanical integration, ensuring compatibility between mechanical structures and electrical components (e.g., wiring harnesses, sensors, actuators). Experience conducting Finite Element Analysis (FEA), Modal Analysis, and Thermal Analysis. Collaborate effectively with electrical, software, and systems engineers to develop integrated solutions. Familiar with Design for Manufacturing (DFM) and Design for Reliability (DFR) principles. You'll Stand Out: Direct experience working with MIL-STD-810 (e.g., vibration, temperature, and shock tests). Knowledge of MIL-S-901D for naval shock testing and MIL-STD-461 for EMI/EMC standards. Familiarity with Electromagnetic Compatibility (EMC) considerations in mechanical design. Experience in rapid prototyping and Additive Manufacturing (3D Printing). Familiarity with fluid dynamics and heat transfer principles. Experience with shock absorption and damping systems for mechanical structures. What We Offer: Competitive salary ACS Equity Package Health, Dental, Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. #LI-AS1

Job DescriptionSalary: Energy Exploration Technologies has a mission to become a worldwide leader in the global transition to sustainable energy. Founded in 2018, the company is fundamentally changing the way humanity is powering our world and storing clean energy with breakthrough lithium-ion technology and energy storage solutions. The Role The Mechanical Engineer will own key process equipment packages, work directly with vendors and engineering firms, and help optimize two demonstration plants to achieve target productivity, operability, and cost-effective commercial design. This role bridges pilot and demonstration operations with commercial engineering. Key Responsibilities Lead mechanical engineering activities for pilot, demonstration, and early commercial lithium separation systems, with responsibility for one or more critical equipment packages. Translate process development and process design package (PDP/PDS) requirements into practical, reliable, and cost-effective equipment and plant designs. Develop and review process flow diagrams (PFDs), piping and instrumentation diagrams (P&IDs), equipment layouts, utility requirements, hydraulic calculations, and equipment data sheets. Collaborate with process engineers, operations personnel, vendors, construction partners, and external engineering firms to support scale-up from demonstration to commercialization. Support optimization, modification, troubleshooting, and ramp-up of two demonstration plants. Commercial Engineering Scope Own vendor engagement for major process equipment packages such as filtration, drying, evaporation, separation, micronizing, thickening, pumps, valves, tanks, heat exchangers, and water treatment systems. Prepare or support technical bid packages, review vendor proposals, compare technical options, and drive equipment selection based on performance, operability, maintainability, and total installed cost. Review and revise vendor mechanical designs, P&IDs, specifications, and expected performance to align with EnergyX process requirements and simplify the commercial plant design where possible. Work closely with external engineering firms on equipment integration, plot plans, plant layout, utilities, and interdisciplinary design coordination. Support design reviews, HAZOP/operability discussions, and field issue resolution during engineering, fabrication, installation, and commissioning. Travel to vendor, fabricator, engineering firm, or project sites as needed during detailed engineering and equipment delivery. Demonstration Plant Scope Support commissioning, startup, troubleshooting, and continuous improvement activities for two demonstration projects. Identify bottlenecks in equipment, key components, and flow systems; propose and implement modifications that improve capacity, reliability, and ease of operation. Collect and interpret operating data to recommend design improvements for the next scale of deployment. Partner with operators and technicians to improve equipment maintainability, spare parts planning, and standard operating practices. Required Qualifications Bachelor's degree in Mechanical Engineering or a related discipline. 3-5+ years of mechanical engineering experience in chemical processing, minerals processing, water treatment, or a similar industrial environment. Experience developing, reviewing, and checking PFDs, P&IDs, equipment specifications, general arrangement drawings, and vendor packages. Working knowledge of industrial equipment including piping systems, valves (manual, control, and relief), pumps, pressure vessels, filters, coalescers, columns, evaporators, tanks, heat exchangers, and reactors. Proficiency with CAD tools such as AutoCAD and/or SolidWorks. Knowledge of applicable design codes and standards such as ASME, DIN/EN, and related regulatory requirements. Demonstrated ability to troubleshoot equipment, communicate effectively with vendors, and work across process, operations, and project teams. Preferred Qualifications Experience supporting pilot plants, demonstration plants, or first-of-a-kind process scale-up projects. Experience working directly with fabrication shops, OEMs, EPC/EPCM firms, or construction contractors. Spanish language proficiency. Success in This Role Drive critical equipment packages from concept through vendor selection, design review, fabrication support, and commissioning. Help demonstration plants achieve target production rates and stable operation. Contribute to a simpler, more robust, and more cost-effective commercial plant design. Work Environment This position is based in Austin, Texas. Travel to vendor facilities, engineering partners, project sites, and international locations in South America may be required - up to 25% travel. What we Offer • Competitive pay, • Paid time-off, holidays, and sick time, • 401(k) with employer match, • Equity Package, • Medical, dental and vision benefits with employer contribution; voluntary benefits available EnergyX is an Equal Opportunity Employer; employment with EnergyX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Job Title: Mechanical Designer/Drafter Job Description We are seeking a Mechanical Drafter to support ongoing design efforts by updating legacy drawings, preparing designs for PLM integration, and providing general drafting support across engineering teams. This role acts as a key partner to both design engineers and the PLM-focused drafter. Responsibilities • Update legacy CAD drawings and documentation., • Support cleanup and standardization of engineering designs., • Assist in preparing drawings for PLM integration., • Create new drawings as needed to support engineering efforts., • Work across multiple teams to support concurrent design needs. Essential Skills • Strong proficiency in SolidWorks., • Understanding of GD&T (Geometric Dimensioning & Tolerancing)., • Experience updating and maintaining CAD files., • 3+ years of mechanical drafting experience. Additional Skills & Qualifications • Experience with dynamic/mechanical systems (moving parts, robotics, fluid systems)., • Exposure to robotics or automation environments., • Any FEA exposure is a plus (not required). Work Environment Enjoy a great company culture and a fun start-up environment. Be a part of a growing company in its early phases. The role is typically onsite, 8-5, with flexibility as needed. Benefit from PTO for the shutdown week from December 26th-31st and 10 paid holidays, including New Year’s Day, Martin Luther King Jr. Day, Memorial Day, Juneteenth, Independence Day, Labor Day, Election Day, Veteran’s Day, Thanksgiving Day, and Christmas Day. Job Type & Location This is a Contract to Hire position based out of Austin, TX. Pay and Benefits The pay range for this position is $30.00 - $42.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Austin,TX. Application Deadline This position is anticipated to close on May 29, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description DH Glabe & Associates (www.dhglabe.com) is looking for a well-qualified structural engineer who is interested in becoming the newest member of our team. This person will work remotely at an office near or in the city this job listing is posted for. We are specifically seeking a candidate who appreciates variety in their work as we provide services for numerous types of projects and niches within the structural engineering realm. We are currently in search of an individual to fill the position of Structural Engineer. A candidate who has experience performing structural design and investigation of heavy civil structures and/or large commercial structures is preferred. The responsibilities of this person will include but not be limited to design, engineering, drafting, client relations, project inspections, and site meetings. This person will be responsible for all tasks involved in taking a project from inception to completion. This is primarily a design engineering position where the work consists of 60% engineering & calculations, 30% drafting and 10% field/site visits. DHG offers a competitive compensation package for the successful candidate. Benefits include: • Health, Dental, and Vision Insurance paid in full for the candidate,, • 401(k) match plan,, • Cellular phone for business/personal use paid in full,, • Reimbursement for professional license and training fees. The successful candidate must meet the following requirements: • Civil/Structural or related Engineering degree from an accredited institution,, • 2+ years minimum post-graduation experience working for a professional engineering firm (this does not mean internships),, • E.I. or P.E,, • Proficient in the use of Microsoft Office,, • Proficient in the use of AutoCAD 2016 or later version,, • Experience with Risa 2D/3D or similar,, • Solidworks or similar FEA experience a big plus. This is an excellent opportunity for an individual who is seeking to test their skills in a unique field of engineering with the top firm in this niche industry. If you have what it takes to be successful in this position, please submit your application via this online portal (no calls please). DH Glabe & Associates is an Equal Opportunity Employer. About the company - DH Glabe & Associates (www.dhglabe.com) is an established and growing structural & construction engineering firm looking to expand our market share throughout the country. Established in 1985, our specific expertise includes primarily the engineering of temporary and unique structures for infrastructure, commercial, and industrial projects. We service a broad range of clientele from all parts of the United States and some internationally. We regularly provide services for the highest profile projects and clients in the nation. Job Posted by ApplicantPro

Job Description Position Overview: Apparent Technologies is looking for an Engineering Technician to join our team. The ideal candidate will have strong CAD software skills, a background in mechanical design, and experience with metal manufacturing processes. This role involves creating detailed manufacturing drawings and CAD models, supporting the engineering team, and resolving production issues. Key Responsibilities: • Create accurate and detailed manufacturing drawings and CAD models., • Use SolidWorks CAD software to design components and systems., • Collaborate with the engineering team on mechanical component design, prototype builds and fixture design., • Address immediate production issues and work with management to develop long-term solutions., • Maintain familiarity with drawing standards, formatting, and dimensioning. Requirements: • Proficiency in SolidWorks CAD software., • Knowledge of component and system design., • Familiarity with drawing standards, formatting, and dimensioning., • Basic understanding of GD&T (Geometric Dimensioning and Tolerancing)., • Experience with CAD modeling and assembly drawings., • Experience converting 3D models to 2D prints using CAD software. Experience: • Minimum 2 years of experience with 3D CAD software., • Minimum 1 year of manufacturing line experience (preferably in the semiconductor industry). Desirable Skills: • CMM experience (preferred but not required)., • Experience with welding and/or machining equipment., • Passion for designing and building mechanical systems. Additional Requirements: • Ability to commute to Austin, TX 78753. Job Type: Full-time Benefits: • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance Ability to Commute: • Austin, TX 78758 (Required) Ability to Relocate: • Austin, TX 78758: Relocate before starting work (Required)

Job Description Company Overview: Allen Control Systems (ACS) is a cutting-edge defense startup, founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders' successful exits from two previous venture acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. Position Overview: We are looking for a highly experienced Mechanical Designer with strong expertise in dynamic mechanical systems and electromechanical integration. The ideal candidate will be well-versed in designing for durability, reliability, and robustness according to MIL-STD-810 standards. You will play a critical role in ensuring our products meet stringent environmental, vibration, and shock requirements, while also integrating complex electromechanical components into our systems. What You'll Do: Design and develop mechanical systems that meet MIL-STD-810 specifications, ensuring robustness under vibration, shock, thermal, and environmental conditions. Perform kinematic and multibody dynamic analysis to predict motion profiles, joint loads, torque requirements, and system stability in robotic and electromechanical assemblies. Perform kinematic and multibody dynamic analysis to predict motion profiles, joint loads, torque requirements, and system stability in robotic and electromechanical assemblies. Perform mechanical simulations (structural, dynamic, modal, vibration, thermal) to assess the durability and reliability of designs under operational stress. Collaborate with electrical and systems engineers to integrate electromechanical components, ensuring seamless interaction between mechanical structures and electrical systems. Develop and document mechanical design specifications, including detailed drawings, simulation reports, and testing protocols. Conduct testing and validation to ensure that mechanical designs meet the required performance and safety standards. Support prototype development and work closely with manufacturing teams to ensure designs are feasible and cost-effective. Maintain a strong focus on product quality, safety, and reliability, adhering to Design for Manufacturing and Design for Reliability best practices. Contribute to cross-functional design reviews, identifying potential mechanical and electromechanical risks early in the development cycle. What You'll Need: A passion for designing robust mechanical systems that can operate in harsh environments. Advanced experience in robot dynamics, such as flexible multibody dynamics, dynamic simulations of compliant mechanisms, or vibration control in robotic arms and gantries 5+ years of experience in mechanical design, including expertise in electromechanical integration. Bachelor's or Master's degree in Mechanical Engineering or a related field. R&D experience working with robotics or in a robotic lab. Advanced experience in robot dynamics, such as flexible multibody dynamics, dynamic simulations of compliant mechanisms, or vibration control in robotic arms and gantries. Proficient in 3D CAD software such as SolidWorks (preferred), CATIA, or Creo. Strong understanding of MIL-STD-810 requirements for mechanical durability, including vibration, shock, temperature, and humidity testing. Skilled in electromechanical integration, ensuring compatibility between mechanical structures and electrical components (e.g., wiring harnesses, sensors, actuators). Collaborate effectively with electrical, software, and systems engineers to develop integrated solutions. Familiar with Design for Manufacturing (DFM) and Design for Reliability (DFR) principles. You'll Stand Out: Advanced experience in robot dynamics, such as flexible multibody dynamics, dynamic simulations of compliant mechanisms, or vibration control in robotic arms and gantries. Direct experience working with MIL-STD-810 (e.g., vibration, temperature, and shock tests). Knowledge of MIL-S-901D for naval shock testing and MIL-STD-461 for EMI/EMC standards Familiarity with Electromagnetic Compatibility (EMC) considerations in mechanical design. What We Offer: Competitive salary ACS Equity Package Health, Dental, Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. #LI-AS1

Job DescriptionMechanical Test Engineer (Automation Tooling & Test Systems)Location: Austin, TX (100% onsite) Compensation: $100,000 - $115,000/year base salary + 10% annual bonus Relocation Assistance: Available for qualified candidates Travel: ≤5% OverviewThis role is not a traditional “test engineer” position. It is heavily focused on the mechanical design of tooling and test systems used within highly automated manufacturing environments, particularly SMT and electronics assembly lines. The Mechanical Test Engineer will design and develop custom tooling and test fixtures integrated into automated test equipment, supporting validation of full products—not just PCB-level testing. This is a hands-on design role requiring strong experience with automation machinery and production test systems. Key Responsibilities • Design mechanical tooling, fixtures, and assemblies used in automated test equipment and test stations, • Develop test interfaces and “test boxes” for high-volume production environments, • Support testing of full electromechanical products (not limited to PCB-level validation), • Collaborate with cross-functional teams including electrical, manufacturing, and automation engineers, • Work within highly automated SMT and electronics production lines, • Translate product requirements into robust, manufacturable test solutions, • Utilize SolidWorks for 3D modeling, assemblies, and drawings, • Drive design improvements for reliability, repeatability, and throughput in automated testing systemsQualifications, • Bachelor’s degree in Mechanical Engineering or related field, • Proven experience designing tooling or fixtures for automated test systems or production machinery, • Strong background in automation environments (electronics or other high-volume manufacturing), • Experience designing for automated testing of full products (not just PCB-level testing), • Proficiency in 3D CAD, preferably SolidWorks, • Understanding of manufacturing processes, automation integration, and production workflowsWhat This Role Is / Is Not, • This is a design-focused role (not primarily execution or bench testing), • Approximately 60% focused on full-product test system/tooling design, • Approximately 30% related to PCB-level test integration, • Ideal for engineers who enjoy building custom solutions for automated manufacturing environments

Job Description CNC Machine Programmer/Operator - The CNC Programmer role at Apparent Technologies is expected to have a comprehensive understanding of all CNC machining and programming operations. This role is tasked with working in close concert with machinists, engineering, and operations management to increase productivity and optimize machining programs and procedures. The ideal candidate will be comfortable programming various CNC machines (Horizontal mill, lathe, etc.) with high precision components in a low-volume / high-mix environment while maintaining quality and safety standards. Essential Functions and Duties: • Program parts from STEP or Native (SolidWorks) models using Mastercam CAD/CAM., • Create and maintain revision-controlled setup sheets for CNC programs., • Program and operate multiple mills and lathes, including manual machining in a low-volume/high-mix workflow. · Produce machined parts by programming, setting up, and operating 3-5 axis CNC mills. Provide training and support to machinists. · Responsible for selection of cutting tools, machine speeds, and feed rates according to machine capabilities and work holding. · Procure necessary tooling for machining processes. · Inspect completed parts for accuracy and quality requirements. · Assist in implementing procedures and processes to improve machine shop efficiency. · Collaborate with the engineering team to enhance designs for better manufacturability. · Utilize knowledge of carbide tools and adjust speed/feed parameters for optimal tool life. · Machine fixture tooling. · Machine complex components to tight tolerances in various materials within tight deadlines. · Keep products moving efficiently and alert management to production inhibitions. · Prepare operator documents for use by machinists. · Use various inspection and measurement tools to validate work. (CMM, Hand tools, etc.) · Support and Follow 5S principles for workspace organization and process improvement. · Perform machinery checks and maintenance. · Verifies conformance of finished workpiece to called specifications within the required tolerances sometimes as close as +/- .0005.

Job Description Company Overview: Allen Control Systems (ACS) is a cutting-edge defense startup, founded by two ex-Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders' successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. Position Overview: As the Senior Industrial Engineer, your primary mission is to design, stand up, and scale new manufacturing facilities to support rapid production of autonomous defense systems. This is a rare opportunity to build factories from the ground up within a rapidly expanding company—defining how we launch new sites, replicate success, and scale operations across multiple locations. You will focus on creating repeatable, high-performance manufacturing systems—owning factory layout, material flow, and production design from initial concept through operational ramp. This role requires a hands-on builder who can translate production goals into fully functioning factories and deploy those systems across sites with speed and consistency. What You'll Do: New Factory Stand-Up: Lead the planning and execution of new manufacturing site launches, from greenfield layout through production ramp. Multi-Site Deployment: Develop standardized layouts, material flow models, and production systems that can be replicated and scaled across multiple facilities. Factory Layout & Flow: Design efficient facility layouts and end-to-end material flow (receiving → storage → kitting → line-side → shipping) to support high-throughput operations. Production System Design: Define and implement production lines, workstations, and labor models aligned to takt time and output targets. Capacity & Ramp Planning: Build capacity models and ramp plans for new and existing sites, identifying constraints and scaling strategies. Tooling & Infrastructure: Partner with Manufacturing Engineering to deploy tooling, fixtures, and factory infrastructure required to bring new sites online. Standard Work & Documentation: Establish standardized processes, work instructions, and operating models to ensure consistency across locations. Cross-Functional Coordination: Work closely with Supply Chain, Facilities, Quality, and Production to ensure each site is fully operational at launch. Continuous Improvement at Scale: Drive improvements across sites by leveraging data, feedback loops, and shared best practices. What You'll Need: Education: BS in Industrial Engineering, Manufacturing Engineering, or a related field Relevant Experience: 7+ years in manufacturing or industrial engineering, with direct experience standing up new production lines, factories, or major facility expansions. Factory Build Experience: Proven track record of taking a facility or production area from concept to operational readiness. Multi-Site Mindset: Experience supporting or scaling manufacturing across multiple locations with a focus on standardization and repeatability. Technical Competence: Expertise in factory layout and flow planning tools (AutoCAD, SolidWorks, or similar) Strong foundation in lean manufacturing (value stream mapping, line balancing, waste reduction) Experience with capacity modeling and production ramp planning • Execution Focus: Ability to operate at both the planning level and hands-on on the factory floor during site bring-up., • Builder Mentality: Comfortable working in ambiguous environments and creating structure where none exists., • Adaptability: Thrives in a fast-paced, high-growth environment with evolving production demands. What we Offer: Competitive salary ACS Equity Package Health, Dental, and Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #LI-AS1 #ZR

Job Description Our client is an innovative, bold transformer company poised to shake up the industry. Their first facility will produce Large Power Transformers (≥100 MVA, 34.5 kV–500 kV class), delivering the precision, reliability, and speed required to strengthen and expand America's grid. They are building the first automated LPT manufacturing platform in the U.S., combining modern robotics with digital twin design to meet growing national demand for transformer production and deployment. This role offers a substantial and generous compensation package to be discussed with all candidates directly. Role Overview The Head of Product Engineering will join the founding team to lead all design, materials, and manufacturability initiatives for the transformer product line. This role will define the company's technical DNA, translating decades of power-engineering expertise into modern, automated, and scalable production. As a critical leader, you will architect the first generation of 100–500 MVA transformers, establish internal design standards, and integrate advanced design tools (CAD, FEA, digital twins) with manufacturing automation. Key Responsibilities Product Design Leadership: Lead end-to-end electrical and mechanical design of LPTs (core, windings, tank, OLTC, bushings, cooling, insulation systems). Design for Manufacturability: Translate designs into scalable manufacturing workflows optimized for automation, repeatability, and quality. System Integration: Define and validate electrical, thermal, and mechanical performance for ≥100 MVA, 34.5–500 kV transformers. Toolchain Development: Implement advanced modeling and simulation environments in collaboration with the Digital Infrastructure team (SolidWorks, COMSOL, ANSYS Maxwell, EMTP-RV). Compliance & Standards: Ensure designs meet IEEE, ANSI, IEC, DOE, and utility specifications; lead design qualification and type testing programs. Supplier & Utility Interface: Engage with utilities, EPCs, and component vendors (core steel, windings, insulation, bushings, OLTC) to support technical execution. Team Building: Recruit, mentor, and grow the core transformer design and product engineering team. Desired Qualifications ~10 years of experience in power transformer design and manufacturing, preferably with Siemens Energy, ABB/Hitachi Energy, GE Grid Solutions, WEG, or a major utility/EPC (Burns & McDonnell, Black & Veatch). Deep expertise in core/winding design, insulation coordination, dielectric testing, loss optimization, and thermal management. Proficiency with transformer design and simulation tools (EFAcE, Flux, ANSYS Maxwell, COMSOL, or proprietary software). Strong understanding of Design for Manufacturability (DfM) and experience with automated or semi-automated production processes. Bachelor's or Master's in Electrical or Mechanical Engineering (Power Systems focus); PhD or PE license preferred. U.S. citizenship or permanent residency required (defense-grade program). Application Process If your experience matches the description above, submit your resume, and one of our recruiters will be in touch to tell you more about the position and learn more about your experience and aspirations. If your experience does not match this job description, we still encourage you to reach out to one of our recruiters, so we can learn about your professional aspirations for future job openings. About Bemana Bemana provides recruiting services to the nation's equipment and industrial sectors. Our clients and candidates value us for our specialized recruiting expertise, vast knowledge of the equipment and industrial job market, and ability to solve their most challenging employment needs. We have successfully recruited thousands of top-level professionals filling a wide range of management, sales, engineering, and technical positions across the nation. Welcome to Bemana and we look forward to getting to know more about you. Referral Program Bemana offers a $500 reward for referrals that lead to a hire. So, if this job or location is not for you, but you know someone that might be interested, send them this link and we'll send you a check if they get hired. Terms & conditions apply.

Job Description Company Overview: Allen Control Systems (ACS) is a cutting-edge defense startup, founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders' successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. About The Role: We are looking for a Mechanical Drafter to support our engineering team in developing detailed mechanical drawings, 3D models, and documentation for our autonomous defense systems. This role will focus on creating and maintaining accurate design documentation, ensuring drawings meet manufacturing requirements, and supporting engineers throughout the product development process. You'll play an important role in translating engineering concepts into clear, manufacturable designs. What You'll Do: Create and revise detailed mechanical drawings, 3D models, and assemblies in SolidWorks for manufacturing. Develop and maintain accurate drawing packages, BOMs, and part libraries. Support mechanical engineers by converting design concepts into clear and precise technical drawings. Collaborate with mechanical, electrical, and embedded teams to ensure mechanical designs integrate properly with system components. Assist with design revisions, prototyping efforts, and documentation updates during product development cycles. Apply drafting standards, GD&T, and tolerancing practices to ensure manufacturable and production-ready designs. Maintain organized documentation and ensure drawings follow internal engineering standards and revision control processes. Work with fabrication and assembly teams to resolve design issues and support production. What You'll Need: Associate’s or Bachelor’s degree in Drafting, Mechanical Engineering Technology, Electrical Engineering Technology, or a related field. 2+ years of experience drafting in a mechanical/electrical engineering environment. Proficiency with SolidWorks for mechanical modeling and drafting. Familiarity with GD&T, mechanical tolerancing, and drafting standards (ASME Y14.5). Understanding of mechanical assemblies, fasteners, and electro-mechanical systems. Ability to interpret engineering concepts and translate them into accurate technical drawings. Excellent attention to detail and organizational skills. Comfortable working in a fast-paced, highly collaborative environment. You'll Stand Out: Experience supporting hardware development in defense, aerospace, robotics, or industrial equipment. Hands-on experience supporting rapid prototyping or prototype builds. Exposure to configuration management systems and PLM tools. Experience with 3D printing or rapid prototyping technologies. Prior work in a startup or high-velocity engineering team. What We Offer: Competitive salary ACS Equity Package Health, Dental, Vision Insurance Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. #LI-AS1

Job Description At TerraFirma, we’re redefining how the world moves earth for construction. Founded by former SpaceX engineers and backed by Bain Capital Ventures, TerraFirma is automating construction to make it faster, cheaper, and safer. Our Story & Mission At SpaceX, we were part of the teams that built the largest rocket in human history, launched the largest constellation of satellites ever made, and delivered connectivity to millions of people worldwide. What we learned was simple: infrastructure is everything. At Starbase, the biggest barrier to launching missions to Mars was not building the rocket. It was how slow, expensive, and complex it was to build the infrastructure around it. We lacked buildings, roads, water, power, communications, and waste management, and constructing them took far more time and resources than it should have. From a first-principles perspective, that doesn't make sense. It shouldn't be this hard or costly to create the foundations for progress. That’s when we realized something important: the same engineering mindset that enabled us to tackle space exploration and mass manufacturing could be applied to infrastructure. By bringing the principles of simplification, iteration, acceleration, and automation to construction, we can unlock a new era in how the world builds. Accelerating infrastructure unlocks progress across every domain, creating a self-sustaining engine for tackling humanity’s toughest challenges. The innovations we develop on Earth will lay the groundwork for the technologies that one day make settlement on Mars possible. Job Overview Design, prototype, and deploy rugged electromechanical systems that integrate precision mechanical design with robust electrical components. Develop enclosures, actuators, linkages, and wiring harnesses built for extreme conditions. Collaborate with multidisciplinary teams to rapidly prototype, test, and refine systems for reliable real-world performance. Responsibilities Design mechanical systems with enclosures, actuators, linkages, mounts, and custom brackets for remote operation of heavy machinery Rapidly prototype and iterate using 3D printing, CNC machining, and other in-house fabrication methods Work with internal engineering teams, vendors, and manufacturers to ensure designs are feasible and cost-effective Build and test electromechanical assemblies designed to survive vibration, impact, water ingress, and outdoor exposure. Integrate wiring harnesses with mechanically secure routing, protection, and strain relief Diagnose and repair mechanical and electrical components using standard tools and hands-on evaluation Collaborate with vendors and fabricators to produce reliable, field-ready mechanical parts and electrical components Maintain CAD models, mechanical drawings, and build documentation to support repeatable assembly Basic Qualifications B.S. in Electromechanical, Mechanical, or Mechatronics Engineering Hands-on experience designing and assembling mechanical systems with actuators and sensors Proficient in mechanical prototyping using 3D printing, machining, and basic fabrication tools Familiarity with field deployment challenges like mechanical fatigue, waterproofing, and ruggedization Ability to collaborate across disciplines with electrical and software teams Preferred Skills & Experience Experience designing electromechanical systems for Drones, Electric Vehicles, Aircraft, or Robotics strongly preferred Strong mechanical design of electronics enclosures for extreme environments Experience with motion systems including brushless DC motors, multi-bar linkages, kinematics, basic microcontroller programming Experience with structural analysis and material selection for outdoor, high-impact environments Familiarity with sensor integration and other motion feedback components Understanding of EMI shielding, thermal management, and protective enclosure design Experience routing wiring harnesses in mobile or vibration-prone systems Proficiency with CAD tools (e.g., SolidWorks, Fusion 360, Onshape, or similar) and mechanical documentation A strong understanding of Electrical Engineering principles, experience with electrical design, and hands on experience with building electrical systems Additional Requirements Must be willing to work extended hours or weekends when needed to support critical deadlines or triage urgent deployment issues Comfortable with working in a fast-paced startup environment Must be willing to relocate to Austin, TX if not within commuting distance Compensation & Benefits Base compensation will vary based on factors such as relevant experience and education. Salaries and leveling will be determined on a case-by-case basis if an offer is extended. Our total compensation package also includes equity in TerraFirma. Relocation packages are available to help cover moving costs, if applicable.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are seeking a highly driven Senior Project Engineer I to lead the planning and execution of test milestones for our space product portfolio. In this role, you will create and maintain integrated program timelines across multiple product lines, ensuring alignment and proactively identifying conflicts. You will oversee the management of test vendors and deliverables, including test station deployments, fixture procurement, harness fabrication, and other critical hardware. This position will also own the tracking and communication of project risks and underlying assumptions, clearly articulating their impact to stakeholders and driving informed decision-making within the team. This is a pivotal role for ensuring our test capabilities are delivered on time, on budget, and to the highest standards of performance for our space systems. The Senior Project Engineer is accountable for driving schedule alignment, vendor deliverables, and cross-team coordination to ensure test milestones are met across all space product lines. While this role is responsible for verifying that test planning, data analysis, and problem resolution activities are completed on time and to quality standards, the technical depth and engineering authority for these activities remains with the assigned subject matter experts and test engineers. The Senior Project Engineer is empowered to challenge assumptions, escalate risks, and ensure clarity in decision-making, but does not serve as the primary technical owner for test methods, data, or design quality.JOB DUTIES AND RESPONSIBILITIES • Serve as the primary point of contact for assigned test projects, ensuring alignment between engineering, manufacturing, quality, and test operations teams., • Develop and maintain project schedules, resource plans, and risk assessments for test campaigns., • Ensure engineering requirements are translated into actionable test plans, procedures, and acceptance criteria by the responsible engineering teams, tracking progress and resolving roadblocks., • Coordinate design and fabrication of test fixtures, instrumentation, and support equipment., • Oversee test execution, ensuring adherence to safety protocols, engineering specifications, and regulatory requirements., • Review and validate that test data is analyzed and interpreted appropriately, and that technical reports and presentations are completed and communicated to stakeholders on schedule., • Facilitate and track issue resolution efforts, ensuring root cause analyses, corrective actions, and continuous improvement initiatives are implemented by the owning teams., • Own budgeting, procurement, and vendor coordination for assigned programs. Manage allocated budgets, escalate potential overruns, and lead vendor relationships to ensure timely delivery of test assets.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Bachelor’s degree in Mechanical, Aerospace, Electrical Engineering, or a related field (Master’s degree a plus)., • 4+ years of engineering experience in an aerospace, defense, or high-technology environment, preferably in a test-focused role., • Strong understanding of mechanical, electrical, and/or structural test methods, instrumentation, and data acquisition systems., • Experience with project management tools and methodologies (PMP certification a plus)., • Excellent organizational, communication, and problem-solving skills., • Ability to work in a fast-paced, multidisciplinary environment and manage multiple projects simultaneously., • Familiarity with space industry standards, safety protocols, and regulatory requirements (e.g., NASA GEVS, SMC-S-16, MIL-STD environmental, & EMI/EMC standards).PREFERRED EXPERIENCE, • Experience with environmental test systems (thermal, vibration, shock, vacuum, etc.)., • Knowledge of CAD tools (e.g., SolidWorks, CATIA) for test fixture design., • Knowledge of data analysis in software language like MATLAB, LabVIEW, Python., • Working knowledge of PCBA and unit-level test sequence development to effectively assess schedules, challenge assumptions, and identify potential execution risks.CesiumAstro considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate’s work experience, education/training, and key skills. Full-time employment offers include company stock options and a generous benefits package including health, dental, vision, HSA, FSA, life, disability and retirement plans. CesiumAstro is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. Please note: CesiumAstro does not accept unsolicited resumes from contract agencies or search firms. Any unsolicited resumes submitted to our website or to CesiumAstro team members will be considered property of CesiumAstro, and we will not be obligated to pay any referral fees. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionLast Energy is seeking a highly skilled and motivated R&D Operations Engineer to lead our rapid prototyping and internal manufacturing capabilities. This is a critical, hands-on role that requires a robust blend of mechanical engineering principles, advanced machining expertise, and manufacturing operations leadership. The Engineer will be responsible for accelerating the development and iteration of our groundbreaking projects by owning the full lifecycle of prototype development, from CAD/CAM to final fabrication and assembly, within our fast-paced R&D environment.Key Duties & Responsibilities • Lead the planning, execution, and continuous improvement of rapid prototyping and R&D manufacturing operations, ensuring timely delivery of high-quality, high-precision components., • Develop, program, and optimize complex parts using CAD/CAM software (e.g., Mastercam, Fusion 360) and G-code for a wide array of precision machinery, including multi-axis CNC mills and lathes., • Design and fabricate mechanical components, fixtures, and tooling, applying robust principles of Mechanical Engineering, Design for Manufacturing (DFM), and Geometric Dimensioning and Tolerancing (GD&T)., • Specify, procure, and manage the maintenance, calibration, and operational readiness of all shop equipment, including CNC machines, manual lathes, welders, laser cutters, and metrology instruments., • Collaborate closely with R&D and Engineering teams to transition component designs from concept to manufacturable prototypes, providing expert guidance on material selection, fabrication methods, and process refinement., • Establish and enforce rigorous safety protocols, quality control standards, and shop best practices to maintain a clean, organized, and safe world-class R&D manufacturing environment., • Perform troubleshooting and root cause analysis for manufacturing process deviations or equipment issues, implementing effective, long-term solutions.Qualifications, • Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or a related technical field, or equivalent demonstrated practical experience in a high-precision R&D/prototyping environment., • Must have 3+ years of professional, hands-on experience in advanced CNC programming and precision machining., • Expertise in applying and interpreting Geometric Dimensioning and Tolerancing (GD&T) per ASME Y14.5 standards is required., • Proven expertise in setting up, operating, and troubleshooting a wide array of fabrication equipment (e.g., multi-axis CNC, manual machines, TIG/MIG welding, laser cutting)., • Strong foundational knowledge of mechanical engineering principles and material science., • Proficiency in 3D CAD software (e.g., SolidWorks, Inventor, Fusion 360) for both design and tooling., • Demonstrated experience in a leadership or managerial capacity for a machine shop, R&D lab, or similar technical operation is highly desirable., • Strong work ethic, excellent organizational skills, and the ability to lead projects and personnel in a dynamic R&D setting., • Legally authorized to work in the United States.

Job DescriptionLast Energy is a pioneering US technology company deploying next-generation modular nuclear power plants. With projects underway in the US and UK, we’re transforming how nuclear energy is designed, built, and delivered—through high-throughput manufacturing, efficient supply chains, and rapid deployment strategies. As a Senior Mechanical Engineer at Last Energy, you’ll work directly with the CEO and core leadership team to drive forward the most critical mechanical and system-level challenges shaping our fleet-wide product. This is a role for builders, doers, and innovators who thrive in a fast-paced, hands-on environment where decisions are made quickly and your ideas directly shape the product.Key Duties & Responsibilities • Lead design and execution of critical mechanical systems and components that enable scalable, manufacturable nuclear power plants, • Collaborate daily with the CEO and executive team on the company’s most urgent engineering priorities—your technical insights will directly inform product strategy and deployment timelines, • Drive concept development, detailed CAD modeling, and rapid prototyping of novel industrial systems, • Perform structural, thermal, and fluid analyses using advanced simulation tools (FEA, CFD) to validate and optimize designs, • Design and analyze complex mechanical assemblies, • Integrate mechanical, electrical, and control systems into cohesive plant-level solutions, • Oversee prototype fabrication, assembly, and testing, both in-house and with external partners, • Develop fixtures, tooling, and manufacturing aids to streamline build and test operations, • Continuously optimize designs for manufacturability and deployment speed, balancing performance with cost and scalability, • Operate autonomously, driving projects from concept to reality in a startup culture that values speed, ingenuity, and accountabilityQualifications, • Bachelor’s degree in Mechanical Engineering or a related field (advanced degree a plus), • 4+ years of hands-on mechanical design and analysis experience in high-growth, high-urgency environments (startup or advanced manufacturing preferred), • Deep proficiency with CAD tools (SolidWorks, AutoCAD, or equivalent), • Demonstrated expertise in FEA and CFD using software such as ANSYS, LS-DYNA, Nastran, or similar., • Strong foundation in materials science, stress analysis, and thermal/fluid systems, • Proven ability to turn concepts into tested prototypes quickly, with minimal oversight, • Exceptional communication and collaboration skills, especially when interfacing with executives and cross-functional teams, • A bias toward action, creative problem solving, and the drive to own complex problems end-to-endLast Energy provides decarbonized, reliable, affordable nuclear energy at scale by innovating on the delivery model, not the reactor. By significantly reducing the time and cost of deployment, we are decarbonizing global energy production, increasing access to 24/7 baseload power, and creating a scalable clean energy future for humanity.

Job Description About Paradromics Brain-related illness is one of the last great frontiers in medicine, not because the brain is unknowable, but because it has been inaccessible. Paradromics is building a brain-computer interface (BCI) platform that records brain activity at the highest possible resolution: the individual neuron. AI algorithms then decode this massive amount of brain-data, enabling the seamless translation of thought into treatments. Our first clinical application, the Connexus® BCI, will help people who are unable to speak, due to ALS, spinal cord injuries and stroke, to communicate independently through digital devices. However, the capabilities of our BCI platform go far beyond our first application. With the brain in direct communication with digital devices, we can leverage technology to transform how we treat conditions ranging from sensory and motor deficits to untreatable mental illness. The Role As a Process Engineer, you will own and optimize critical in-house manufacturing processes including polishing/lapping, cleaning, and mechanical assembly. Over the next 12–18 months, you will drive measurable improvements in yield, reliability, and cycle time through both hands-on work and cross-functional collaboration. You will also lead non-conformance investigations and implement robust process controls to support scalable, high-quality production. Responsibilities • Own and continuously improve in-house processes including lapping/polishing, cleaning, and mechanical assembly, • Lead process improvement initiatives using structured methodologies to increase yield, throughput, and reliability, • Investigate and disposition non-conformances, performing root cause analysis and implementing corrective/preventive actions, • Develop, qualify, and validate manufacturing processes and equipment (IQ/OQ/PQ), • Characterize and optimize cleaning and surface preparation processes to ensure long-term stability and performance, • Create and maintain clear, effective SOPs and manufacturing documentation, • Collaborate cross-functionally with design, reliability, and supply chain teams to ensure process robustness Required Education • Bachelor’s degree in Mechanical Engineering, Chemical Engineering, Materials Science, or a related field Required Qualifications • Hands-on experience developing and optimizing cleaning, polishing, or surface preparation processes, including control of key variables (e.g., chemistry, temperature, pressure, frequency), • Experience driving yield improvement using structured problem-solving methods (e.g., DOE, 8D, 5-Why, Ishikawa), • Experience in a regulated manufacturing environment (e.g., MedTech, Aerospace) with non-conformance handling and root cause investigations, • Strong data analysis skills, including data extraction, statistical analysis, and visualization, • Proven ability to write clear, concise SOPs and technical documentation, • Strong cross-functional communication and collaboration skills Preferred Qualifications • Experience with thin film cleaning, sample preparation, or pre-treatment processes, • Familiarity with CAD tools (e.g., SolidWorks, Inventor) to design fixtures or error-proofing solutions, • Ability to interpret engineering drawings and GD&T Paradromics is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, or national origin. Powered by JazzHR yhAIapn4cp

Job DescriptionJob Title: Mechanical Drafter - PLM Job Description We are seeking a Mechanical Drafter with strong PLM experience to support the integration of engineering designs into their product lifecycle management (PLM) system (Duro). This role will focus on ensuring designs are properly structured, managed, and released for manufacturing. Responsibilities • Manage and upload engineering designs into the PLM system (Duro)., • Ensure designs are properly formatted and organized for manufacturing., • Support revision control and product lifecycle processes., • Modify existing designs to meet PLM requirements., • Collaborate with engineering teams to transition designs into production-ready documentation., • Act as a key interface between engineering and manufacturing.Essential Skills, • Design and mechanical drafting experience., • Proficiency in Solidworks and CAD., • Direct experience with Duro PLM or similar PLM/PDM systems is highly preferred., • At least 3 years of drafting/design experience., • Strong understanding of revision control and product lifecycle processes., • Experience working with CAD files and engineering documentation.Additional Skills & Qualifications, • Experience with Duro PLM is highly preferred., • Experience transitioning designs into manufacturing environments., • Exposure to multiple PLM systems, indicating adaptability.Work Environment The role requires onsite work from 8 AM to 5 PM, with flexibility for overtime. The company offers a great culture with a fun startup environment. Employees benefit from PTO during the shutdown week from December 26th to 31st, along with 10 paid holidays including New Year’s Day, Martin Luther King Jr. Day, Memorial Day, Juneteenth, Independence Day, Labor Day, Election Day, Veteran’s Day, Thanksgiving Day, and Christmas Day. Job Type & Location This is a Contract position based out of Austin, TX. Pay and Benefits The pay range for this position is $30.00 - $65.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Austin,TX. Application Deadline This position is anticipated to close on Jun 5, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Shape the future of innovation as we tackle cutting-edge projects that make a difference.We’re not just in the business of engineering—we’re building a brighter future.Driven by creativity and a culture of excellence, we believe in the power of engineering to solve today’s challenges and cre

OpenAI’s Stargate organization is building the physical infrastructure required to power frontier AI systems at massive scale.The team operates across the full lifecycle of infrastructure development and operations — from hardware, manufacturing, and partner readiness through deployment, bring-u

We are a Digital Product Engineering company that is scaling in a big way! We build products, services, and experiences that inspire, excite, and delight.We work at scale — across all devices and digital mediums, and our people exist everywhere in the world (18000+ experts across 36 countries, to

Handshake is looking for skilled.AI research through flexible, hourly contract work.You'll draw on your hands-on experience with schematic capture, PCB layout, or embedded hardware design to evaluate AI-generated content and provide feedback that helps AI better understand electronics design tasks a

Familiar with Zendesk, Asana, SolidWorks, Tableau.

Millions of people across the country are navigating mental health conditions, substance use disorders, and eating disorders, but too often, they’re met with barriers to care.From limited local options and long wait times to treatment that lacks personalization, behavioral healthcare can leave peo

Headquartered in Miami, the company has a global presence with teams in Berlin, London, New York, and China.Once acquired, these brands are integrated into unybrands' platform, where operations are optimized, business performance is enhanced, and expansion into new product lines and markets is drive

Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

Utilize SolidWorks for 3D modeling, assemblies, and drawings. Proficiency in 3D CAD, preferably SolidWorks.

Civil Engineer, Freight Rail Design.Transportation Team in one of our Midwest offices including.Kansas City, MO, Omaha, NE, Chicago, IL, and Austin, Dallas, and Houston, TX.Working on the Transportation team at .Whether working on highways and bridges or traffic engineering, our team excels in re

Jabil Malaysia is seeking a Principal Mechanical Design Engineer to oversee the mechanical systems for Data Center Infrastructure.This role involves developing specifications for thermal components, selecting key components, and leading test processes.Ideal candidates will have 8+ years of experienc