Solidworks jobs in Irvine, CaliforniaCreate job alerts

Job Description Join a team where your impact reaches beyond the stars! At Terran Orbital, you're not just part of the system – you're a vital force propelling our mission forward. As trailblazers in satellite manufacturing and aerospace innovation, we shatter boundaries daily to deliver groundbreaking solutions that power our nation's defense and commercial missions. We are a unique, fast growing, and trusted team dedicated to swiftly and efficiently designing, building, launching, and operating state of the art satellites for advanced mission constellations. If you're driven by purpose, inspired by challenges, and ready to leave your mark on the universe, you'll find a home and endless opportunities for growth here. Together, let's redefine what is possible in orbit and beyond! Description Terran Orbital is seeking an experienced Principal Mechanical Engineer to join our growing team. Reporting to the Sr. Product Director, GNC Sensor Modules the Principal Mechanical Engineer will work within a multidisciplinary team to develop and support the design, prototype, qualification and sustainment of innovative components and modules for various spacecraft. Key Duties and Responsibilities • Use MATLAB to analyze stability and performance of motor rotor dynamics., • Perform tuning on actuator control systems based on analysis and test results., • Develop preliminary designs grounded in sound engineering reasoning., • Create and/or lead a team through detailed design, requires a strong understanding of GD&T and various manufacturing methods., • Perform and/or lead team through structural, thermal, and dynamic analysis, with a strong understanding of design principles to improve analysis results., • Conduct final review on mechanical and electrical drawings., • Test actuators at module and satellite level to validate and characterize design intent and requirements., • Propose and develop new analytical methods and processes for improving module design performance predictability., • Identify and Lead Process Development and Continuous Improvement initiatives., • Provide technical guidance and direction to the engineering and project team., • Bachelor's degree in Engineering; Master's degree or PhD preferred., • Minimum of 12 years of experience in Aerospace and Defense product development., • Proficiency with SolidWorks or similar CAD packages., • Proficiency with bearing analysis software (ORBIS or equivalent)., • Proficiency with FEA analysis., • Advanced knowledge with the design of complex, high precision rotating mechanisms., • Deep knowledge of rotor dynamics design and analysis., • Proven ability as a leader to complete projects according to outlined scope, budget, and timeline., • Excellent written and verbal communication skills, including the ability to communicate technical concepts to non-technical stakeholders., • Familiarity with Engineering Review Boards and Root Cause Corrective Actions., • Proficient working with EPDM or other PDM software., • Proficient in the use of shop tools, assembly techniques, inspection methods and equipment., • Experience with Altium or similar electrical design software., • Strong leadership and interpersonal skills, including the ability to lead and motivate a diverse team. Your actual level and base salary will be determined case-by-case and may vary based on the job-related qualification, knowledge, skills, education, and experience. In addition to base salary, we offer 100% covered medical, dental, and vision coverage, a 401(k) match, Flexible Time Off (FTO), covered life insurance, maternity and paternity leave, tuition reimbursement, employee referrals, and lots of swag! Salary Range$175,000—$220,000 USD Benefits • 100% Company-paid comprehensive medical, dental, and vision coverage for you and your dependents, • 401(k) Match, • Flexible Time Off (FTO), • Education Reimbursement Terran Orbital is a leading manufacturer of satellite products primarily serving the aerospace and defense industries. Terran Orbital provides end-to-end satellite solutions by combining satellite design, production, launch planning, mission operations, and on-orbit support to meet the needs of the most demanding military, civil, and commercial customers. Learn more at Physical Demands An employee must meet the physical demands described to perform the essential functions of this job successfully. In performing the duties of this job, the employee is routinely required to sit or stand for long durations of time, in addition to bending, reaching, and walking. This would require the ability to lift or move objects up to 10 pounds and occasionally lift or move objects up to 25 pounds. This position is generally sedentary, with substantial computer usage. Work Environment The job operates in a professional office environment but in a manufacturing company. This job routinely uses standard office equipment such as computers, phones, photocopiers, and scanners. Disclaimers To comply with U.S. Government space technology export regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. In addition, please note that this position may require a current United States National Security clearance or eligibility for such a clearance. Terran Orbital is an Equal Opportunity/Affirmative Action Employer. We consider applicants without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender, gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, or membership in any other group protected by federal, state, or local law. If you need assistance or accommodation due to a disability, you may contact us at . Terran Orbital does not accept unsolicited resumes from recruiters, employment agencies, or staffing firms. To conduct business with Terran Orbital, a Master Services Agreement (MSA) must be executed and confirmed prior to submitting any information relating to a potential candidate. Without a signed MSA, Terran Orbital shall not be responsible to any individual or entity for any payment relating to any form of fee or compensation. And, in the event that a resume or candidate is submitted by a recruiter, an employment agency, or a staffing firm without a fully executed MSA, Terran Orbital has the unrestricted right to pursue and hire any of those candidate(s) without any legal or financial responsibility to the recruiter, agency, and/or firm.

Job DescriptionDescription The Senior Mechanical Engineer will play a key role in designing, developing, and testing mechanical systems and components. This role involves working closely with cross-functional teams, managing complex engineering projects, and ensuring that mechanical systems meet performance, reliability, and safety standards. Key Responsibilities • Design and Development: Lead the design and development of mechanical systems, including structural components, thermal management systems, and mechanical interfaces. Ensure designs meet mission requirements and industry standards., • Project Management: Manage engineering projects, including defining project scope, timelines, and resources. Ensure that projects are completed on schedule, within budget, and to required quality standards., • Integration: Collaborate with cross-functional teams to integrate mechanical systems into spacecraft and satellite platforms. Ensure compatibility with electrical, thermal, and software systems., • Testing and Validation: Develop and execute test plans for mechanical systems. Conduct performance and reliability testing to validate system functionality and compliance with specifications., • Problem-Solving: Address and resolve technical issues related to mechanical systems. Troubleshoot problems and implement corrective actions as needed., • Documentation: Prepare and maintain comprehensive documentation, including design specifications, test reports, and technical manuals. Ensure all documentation is accurate and compliant with company standards., • Education: Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, or a related field., • Experience: 5+ years of experience in mechanical engineering, with a focus on designing and developing mechanical systems for aerospace or high-tech industries., • Technical Skills: Strong knowledge of mechanical system design, structural analysis, thermal management, and mechanical interfaces. Proficiency with engineering tools and software for design and simulation (e.g., SolidWorks, ANSYS)., • Project Management: Experience managing engineering projects, including defining scope, timelines, and resources. Ability to ensure projects meet quality and performance standards., • Problem-Solving: Excellent analytical and problem-solving skills, with the ability to troubleshoot and resolve complex technical issues., • Communication: Strong verbal and written communication skills, with the ability to present technical information clearly and collaborate effectively with team members and stakeholders.Preferred Qualifications:, • Education: Master’s degree in Mechanical Engineering or a related field., • Experience: 7+ years of experience in mechanical engineering, with significant experience in aerospace or space technology sectors. Experience with spacecraft or satellite systems is a plus., • Advanced Skills: Expertise in advanced mechanical systems design and integration techniques. Familiarity with high-stress materials, thermal control systems, and space-qualified components., • Certifications: Relevant certifications in mechanical engineering or project management (e.g., Professional Engineer (PE)) are a plus., • Industry Experience: Extensive experience working in aerospace or space technology sectors, including understanding of the unique requirements and challenges associated with mechanical systems for space missions., • Innovation: Proven ability to drive innovation in mechanical system design and implementation, contributing to the development of cutting-edge space technologies.ITAR Requirements:, • This position may include access to technology and/or software source code that is subject to U.S. export controls. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Benefits • Health Insurance: Comprehensive medical, dental, and vision coverage., • Retirement Plans: Access to a 401(k) plan., • Paid Time Off: Generous vacation days, personal days, and holidays to ensure you have time to recharge., • Professional Development: Opportunities for ongoing training, workshops, and courses to advance your skills and career growth., • Team Building Activities: Regular social events, team outings, and company-sponsored activities to foster a positive work environment., • Diverse and Inclusive Culture: A commitment to diversity and inclusion, with initiatives to support a welcoming and equitable work environment.Turion Space is an Equal Opportunity Employer; employment with Turion Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Applicants wishing to view a copy of Turion’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should notify the Human Resources Department.

Job DescriptionDescription: RxSight® is an ophthalmic medical technology corporation headquartered in Aliso Viejo, California that has commercialized the world’s first and only adjustable intraocular lens (IOL) that is customized after cataract surgery. The company’s mission is to revolutionize the premium cataract surgery experience by allowing surgeons to partner with their patients to achieve optimized results for every unique eye. OVERVIEW: The Senior Manufacturing Engineer will play a vital role in supporting and leading the sustaining efforts aimed at continuous improvement and maintaining robust manufacturing processes related to the Light Adjustable Lens and Insertion device manufacturing. As a vital member of the Manufacturing Engineering team, this individual will closely collaborate with Manufacturing, Design Engineering and Quality Control/Assurance departments to ensure production line sustainability, compliance with regulations, and quality systems requirements. The Senior Manufacturing Engineer will be responsible for deploying lean manufacturing methodology and implementing the culture of continuous improvement to improve overall safety, quality, on-time delivery, and productivity of our LAL and Insertion device manufacturing and processes. This individual will also guide and mentor the engineering team and other departments in resolving manufacturing and production issues, improving engineering and project systems, and identifying and resolving product or process issues. Requirements: ESSENTIAL DUTIES AND RESPONSIBILITIES: • Lead effort in support of continuous improvement initiatives aimed at enhancing production efficiency, ensuring business continuity, and maintaining regulatory compliance., • Implement corrective and preventive actions for production non-conformances., • Establish and execute validation strategies (IQ/OQ/PQ) for new processes, and equipment in compliance with ISO 13485 and FDA regulations., • Implement corrective and preventive actions for production non-conformances., • Provide troubleshooting expertise for equipment-related issues and offer technical support to operators and technicians as required., • Initiate documents such as drawings, work instructions, and reports ensuring proper routing through the quality management system., • Perform training necessary for the implementation of processes/tooling changes as necessary., • Set up, operate, and maintain various manufacturing equipment and tools., • Perform diagnostics, troubleshoot, and repair complex electrical, mechanical, network and software issues., • Participate in root cause analysis and implement corrective actions for manufacturing issues., • Perform analysis and provide input to mitigate risk due to obsolete or high-risk equipment and parts., • Demonstrates a hands-on approach to problem solving, ensuring prompt task closure., • Familiarity with SolidWorks PDM software (desired)., • Proficient in conducting training sessions and initiating engineering change requests., • Prior experience working in a cleanroom environment/ or medical device manufacturing is highly preferred., • Experience with optical measurement systems (Keyence, NEMO, or similiar), • Demonstrate strong problem-solving skills and can ask critical questions without being the subject matter expert., • Professional, responsible, energetic, and accountable., • Strong interpersonal skills – the ability to communicate effectively at multiple organizational levels including technicians, Engineering, Chemistry, and Production operators., • Clear communicator – understands how to distill information to have substantive discussions with the right audience., • Strong Organizational skills – the ability to balance and prioritize multiple studies, and manufacturing builds., • Continued appetite to learn about our technology, its performance characteristics, and its manufacturing process – our process and our technology are unique!, • Bachelor’s degree in Biomedical, Electrical, or Mechanical Engineering with a minimum of 7 years of technical experience., • Master’s degree in Biomedical, Electrical, or Mechanical Engineering with a minimum of 5 years of technical experience., • Continuous improvement experience., • Familiarity with regulatory standards (ISO 13485)., • Familiarity with good manufacturing practices (GMP) and good documentation practices (GDP). Experience with good laboratory practices (GLP) is a plus., • Training to be completed per the training plan for this position as maintained in the document control system, • Microsoft Word; Microsoft Excel; Teams, • MiniTab, • Project Management System (SmartSheet preferred) RxSight does not accept unsolicited resumes or candidate submissions from staffing agencies or search firms for any employment opportunities. All agency engagements must be authorized in writing for a specific position by RxSight’s Talent Acquisition department. Any resumes or candidate information submitted without such specific engagement will be considered unsolicited and the property of RxSight. No fees will be paid in the event a candidate is hired under these circumstances.

Job DescriptionThermal/Mechanical Engineer Location: California Reports To: Vice President, Systems Engineering Salary Range: $150,000 – $170,000 Overview We are seeking a highly skilled Thermal/Mechanical Engineer to join a leading engineering team in the development of innovative thermal solutions for memory and storage products. This role will play a critical part in shaping next-generation technologies that support AI, cloud computing, and enterprise infrastructure. Position Summary The Thermal/Mechanical Engineer will design, model, and validate advanced thermal solutions for high-performance memory and storage hardware used by top-tier OEMs, ODMs, and hyperscale clients. The ideal candidate will combine deep technical expertise with hands-on design and problem-solving skills. Key Responsibilities * Create mechanical and thermal models of electrical and mechanical assemblies using CAD files or from scratch. * Design or source thermal solutions for advanced memory and storage products. * Run simulations to validate that thermal designs meet specified requirements. * For custom solutions, specify required materials and prepare detailed fabrication and assembly drawings. * Develop and implement Design of Experiments (DoEs) to evaluate thermal properties of assemblies. * Collaborate with electrical engineering teams, providing feedback and design suggestions. * Generate assembly drawings and ensure proper documentation of assembly processes. * Partner with manufacturing to guarantee assemblies are built to specifications. Qualifications * Bachelor’s or Master’s degree in Mechanical Engineering, Thermal Engineering, or a related field. * 8+ years of industry experience in IC packaging design, thermal, or mechanical engineering. * Proficiency in mechanical drawing tools such as AutoCAD and SolidWorks. * Experience with thermal analysis and simulation tools such as Flowtherm or Icepak. * Familiarity with thermal interface materials (heat sinks, spreaders, greases, gap pads, etc.) is desirable. * Strong problem-solving abilities, attention to detail, and ability to innovate. * Excellent communication skills, professionalism, and ability to work cross-functionally. * Proven stakeholder management and influencing skills. * Knowledge of memory and storage components (DDRx, LPDDRx, NAND) and modules (DIMMs, SSDs, etc.) is highly desirable. * Willingness to travel occasionally (less than 10%). Why This Role Stands Out * Work on cutting-edge thermal solutions powering the next generation of computing and storage. * Collaborate with world-class engineers in a fast-paced, innovative environment. * Competitive salary and growth potential.

Job DescriptionSalary: $25.00-$30.00/ Hour DUTIES INCLUDE: • Perform machine set up and shut down., • Program parts for machining., • Operate CNC machine., • Perform routine maintenance on machine., • Interpret part prints and step files using Solidworks., • Deburr and polish parts., • Request raw materials and tooling as necessary., • Work with Development Department on new designs., • Quality check manufactured parts., • Perform other duties as assigned by manager. REQUIREMENTS: • Knowledge of CNC tooling and related hardware., • Skilled in verbal communication, • Ability to read part prints., • Accomplish work utilizing and abiding by ISO requirements and safety procedures., • Strong attention to detail., • Knowledge of the Microsoft Office Suite, Solidworks, and Camworks programs., • Knowledge of FANUC G-code programming., • Knowledge of Haas controls., • Able to lift 50+ lbs., • Succeeds in self-management., • Strong problem-solving ability. QUALIFICATIONS: • Preferred Machinist Associate's Degree, • Preferred 4-5 years of experience in related field, • Experience Using BobCAM software is a Plus, • Experience Using Haas brand 3 Axis Mills is a Plus PHYSICAL REQUIREMENTS: • Ability to stand for extended periods and perform repetitive tasks., • Ability to lift or move materials weighing up to 50 pounds., • Fine motor skills for handling small parts and tools. WORK ENVIRONMENT: • Comfortable working in a manufacturing environment with exposure to loud noise, dust, and machinery. Personal protective equipment (PPE) is required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job. COMPENSATION AND BENEFITS: • $25-30/hour, • Health, dental, vision, 401K match, life insurance, paid time off

Job DescriptionCompany Description XP Power is a major supplier of critical power conversion technology to the medical, technology, industrial markets. We are a fast-growing company listed on the London Stock Exchange. We are looking for self-motivated professionals who thrive in dynamic environments. We are proud of and committed to our culture that values Customer Focus, Flexibility, Knowledge, Speed, and Integrity. Joining our team means you will work in a high performing global company where employees collaborate and strive for excellence. Job Description This position is within the R&D Group in XP Power Irvine CA. Successful candidate will lead a talented mechanical engineering team that is responsible for designing power converters that includes DC/DC, AC/DC, high power, low power, high voltage, and low voltage switch mode power supplies. The R&D Group features a collaborative environment with creative, smart people and cutting-edge technologies. Engineering excellence is expected and encouraged. Come join us in crafting solutions the world does not know of yet! KEY RESPONSIBILITIES • Lead a mechanical engineering team in the development of power converters from concept to volume production while ensuring that the design meets performance specifications, cost & reliability targets., • Guide the team in the rigorous product development process that includes thermal simulations, DFMEA, GD&T analysis, stress analysis, and extensive design verification test activities., • Drive technical strategy, architecture and operational readiness., • Lead Research and Development activities of new technologies., • Lead root causes analysis activities on products, technical problems, and documentation., • Develop and maintain relationships with all necessary internal engineering organizations to ensure a well-integrated development process and technical outcome., • Lead the performance of the mechanical engineering team to ensure the team is meeting business objectives, design quality and project timelines., • Conduct regular staff meetings to ensure adherence to project schedules, assignment of action items, and appropriate allocation of resources., • Participate in cross functional and peer reviews to ensure designs meet all established requirements, • Collaborate with cross-functional teams and ensure designs adhere to DfX guidelines, • Collaborate with international manufacturing locations during development and product infancy to maximize production yields., • Responsible for hiring, retaining, growing, and mentoring talent.Qualifications, • Bachelor’s degree in mechanical engineering with 10-12 years of design experience in the power supply or related industry, or Master’s degree with 8-10 years of experience, • 3-5 years of engineering management experience is preferred, • Must understand business strategies and have a high level of understanding for the business flow., • Ability to drive engineering deliverables in a hands-on fashion when needed., • Experience with electronic packaging including 3D modelling of cable assemblies, • Experience with thermal and dynamic simulation tools is highly preferred., • Experience developing mechanical packaging solutions for electronic equipment. This could include conceptual design, solid modelling, 3d assembly creation, cable harness design, sheet metal design, and machined part design., • Working familiarity with thermal management principles, stress analysis concepts, • Demonstrated proficiency with SolidWorks, Pro-E, Creo and AutoCAD., • Strong project management experience and supervisory skills, • Excellent verbal, written and organizational skills, • Excellent analytical skills, • Ability to work in a fast-paced environment while delivering excellent results Additional Information Benefits: In addition to competitive salary, XP Power offers a comprehensive benefits package, which includes company sponsored health insurance coverage, and a 401K plan. Non-financial benefits include a friendly work environment. XP Power is an equal opportunities employer.

Job DescriptionSalary: $120k - $150k Job Overview Are you a hands-on engineer, creative problem solver, and innovator who loves to experiment, tinker, and build? Do you thrive on collaborating with designers to bring ideas to life? If so, we want you on our team! We are seeking a Senior Mechanical Engineer to join our innovation-driven engineering team within the Industrial Design department at MerchSource. This role offers a unique opportunity to work on cutting-edge product development across multiple categories and brands. As a key individual contributor, you will bring deep technical expertise in mechanical and product design engineering, driving concept development, prototyping, and quality control. You will collaborate closely with industrial designers, as well as marketing teams, product developers, and manufacturing partners to transform ideas into market-ready products. Key Responsibilities • Partner with award-winning Industrial Designers to develop and validate innovative product concepts., • Lead proof-of-concept development and prototyping, ensuring feasibility, performance, and manufacturability., • Oversee product realization and quality control, working closely with internal product development teams and global manufacturing partners., • Utilize SolidWorks to create complex 3D models, including advanced surfacing techniques., • Apply Finite Element Analysis (FEA) and material selection principles to optimize product performance., • Design and develop mechanisms, functional prototypes, and 3D-printed components., • Collaborate cross-functionally with design, marketing, merchandising, and project management teams., • Maintain clear and effective communication with international manufacturing partners and provide support for production ramp-up., • Travel internationally (primarily to Asia) as needed for manufacturing oversight and project coordination., • Demonstrate strong problem-solving abilities and a proactive, self-motivated approach to challenges., • Bachelors or Masters Degree in Mechanical Engineering (Product Design focus preferred)., • 8+ years of professional experience in consumer electronics or a related field., • Expertise in volume manufacturing processes and material selection., • Highly proficient in SolidWorks, with a strong command of complex surfacing techniques., • Experience in mechanism design, prototyping, and plastic injection molding., • Understanding of electrical engineering to support inside-out product development., • Excellent verbal, written, and visual communication skills, with the ability to collaborate effectively across teams., • Strong critical thinking and creative problem-solving abilities., • Proven ability to manage time effectively, work independently, and drive projects forward with minimal supervision in a fast-paced environment., • Must be authorized to work in the U.S. without sponsorship. Compensation, Benefits, and Perks: • Salary Range: $120,000 $150,000. This salary is a good faith range for the role at time of posting. The actual compensation package offered will depend on a number of factors, including but not limited to: experience, education, background, and qualifications., • Comprehensive Benefits Package including medical, dental, vision, and 401(k) with company match., • Access to on-site gym with state-of-the-art equipment, yoga room, and showers. To apply, please submit: • Your resume Who We Are: MerchSource is the core division of ThreeSixty Group the global organization behind Sharper Image, FAO Schwarz, Vornado, and other consumer brands. Located in a purpose-built research and development campus in Irvine, California, we employ over 120 individuals and are situated in the heart of the developing Southern California tech community. The company also has locations in New York, Dallas, Hong Kong, and China, and we are proud to bring high-quality products to consumers in over 30 countries. We offer a fast-paced, creative environment, appealing to those who love to collaborate with an entrepreneurial spirit and drive to succeed. Our team is core to our mission, and our mission is to inspire happiness through brands and products you love. Our vision is to create a better tomorrow through exceptional experiences that redefines what is possible. MerchSource LLC is an equal opportunity employer and complies with all applicable federal, state, and local fair employm practices laws. MerchSource strictly prohibits and does not tolerate discrimination against employees, applicants, interns, or any other covered persons, on the basis of age, race, color, religion, creed, national origin including ancestry, ethnicity, sex including pregnancy, gender identity, and transgender status, gender, physical or mental disability, including gender dysphoria and similar gender-related conditions, alienage or citizenship status, military status, including past, current, or prospective service in the uniformed services, genetic information, predisposing genetic characteristics, marital status, partnership status, domestic violence victim status, familial status, actual or perceived sexual orientation, unemployment status, caregiver status, credit history, salary history, or any other category protected by applicable federal, state and local laws, with respect to hiring, promotion, discipline, firing, compensation, benefits, or other terms, conditions or privileges of employment.

Job Description Join a team where your impact reaches beyond the stars! At Terran Orbital, you're not just part of the system – you're a vital force propelling our mission forward. As trailblazers in satellite manufacturing and aerospace innovation, we shatter boundaries daily to deliver groundbreaking solutions that power our nation's defense and commercial missions. We are a unique, fast growing, and trusted team dedicated to swiftly and efficiently designing, building, launching, and operating state of the art satellites for advanced mission constellations. If you're driven by purpose, inspired by challenges, and ready to leave your mark on the universe, you'll find a home and endless opportunities for growth here. Together, let's redefine what is possible in orbit and beyond! Description Terran Orbital is seeking an experienced PLM Administrator to join our growing team. Reporting to the Director, IT Projects & Compliance, the PLM Administrator will be responsible for managing and enhancing our PTC Windchill platform and ensuring seamless integration across our CAD (Creo, SolidWorks), CAE (ANSYS/ Keysight), MES (Aegis) and enterprise systems (Microsoft D365). Key Duties and Responsibilities • Administrate and support PTC Windchill, including user access, data structures, lifecycles, and workflows., • Configure and troubleshoot integrations between Windchill and tools like Creo, SolidWorks, ANSYS, D365, and AEGIS MES (as applicable/needed)., • Implement/Maintain workflows and processes, transfer existing documents/CAD files., • Perform routine system maintenance: performance tuning, updates, patches, and backups., • Develop and maintain basic automation/scripts to improve data flow and reduce manual work., • Support engineering and manufacturing teams in resolving PLM-related issues., • Identify and suggest possible improvements in procedures., • Ensure compliance with aerospace standards, including ITAR, AS9100, and others., • Help ensure compliance with aerospace standards, including ITAR, AS9100, and others., • Collaborate with cross-functional teams to gather requirements and ensure the PLM system meets organizational needs., • 5+ years of experience administering PLM Systems, ideally PTC Windchill, or equivalent experience installing, developing, upgrading, and maintaining., • In-depth knowledge of formal Engineering Change Procedures., • Thorough understand of PLM usage and configurations., • Familiarity with CAD/CAE systems, including PTC Creo, SolidWorks, Keysight, and ANSYS., • Experience supporting or integrating ERP and/or MES systems such as Microsoft D365 and Aegis., • Familiarity with PCB Design tools such as Zuken or Altium Designer., • Strong troubleshooting and analytical skills., • Comfortable working across Windows and Linux environments., • Strong customer service skills., • Excellent interpersonal, oral, and written communication skills, including the ability to work effectively in a diverse team environment., • Ability to self-govern with minimum supervision, establish workload priorities, and utilize efficient time management practices to achieve assigned tasks., • Knowledge of both Windows and Linux systems, along with software installations., • 5+ years of hands-on experience with PTC Windchill in an aerospace or defense setting., • Scripting/automation capabilities in Python/Shell, and/or JAVA., • Prior experience with regulated environments: ITAR, DoD, or FAA-regulated programs., • Ability to translate complex technical topics in a clear and compelling fashion., • Passion for space. Your actual level and base salary will be determined case-by-case and may vary based on the job-related qualification, knowledge, skills, education, and experience. In addition to base salary, we offer 100% covered medical, dental, and vision coverage, a 401(k) match, Flexible Time Off (FTO), covered life insurance, maternity and paternity leave, tuition reimbursement, employee referrals, and lots of swag! Salary Range$100,000—$130,000 USD Benefits • 100% Company-paid comprehensive medical, dental, and vision coverage for you and your dependents, • 401(k) Match, • Flexible Time Off (FTO), • Education Reimbursement Terran Orbital is a leading manufacturer of satellite products primarily serving the aerospace and defense industries. Terran Orbital provides end-to-end satellite solutions by combining satellite design, production, launch planning, mission operations, and on-orbit support to meet the needs of the most demanding military, civil, and commercial customers. Learn more at Physical Demands An employee must meet the physical demands described to perform the essential functions of this job successfully. In performing the duties of this job, the employee is routinely required to sit or stand for long durations of time, in addition to bending, reaching, and walking. This would require the ability to lift or move objects up to 10 pounds and occasionally lift or move objects up to 25 pounds. This position is generally sedentary, with substantial computer usage. Work Environment The job operates in a professional office environment but in a manufacturing company. This job routinely uses standard office equipment such as computers, phones, photocopiers, and scanners. Disclaimers To comply with U.S. Government space technology export regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. In addition, please note that this position may require a current United States National Security clearance or eligibility for such a clearance. Terran Orbital is an Equal Opportunity/Affirmative Action Employer. We consider applicants without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender, gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, or membership in any other group protected by federal, state, or local law. If you need assistance or accommodation due to a disability, you may contact us at . Terran Orbital does not accept unsolicited resumes from recruiters, employment agencies, or staffing firms. To conduct business with Terran Orbital, a Master Services Agreement (MSA) must be executed and confirmed prior to submitting any information relating to a potential candidate. Without a signed MSA, Terran Orbital shall not be responsible to any individual or entity for any payment relating to any form of fee or compensation. And, in the event that a resume or candidate is submitted by a recruiter, an employment agency, or a staffing firm without a fully executed MSA, Terran Orbital has the unrestricted right to pursue and hire any of those candidate(s) without any legal or financial responsibility to the recruiter, agency, and/or firm.

Job Description Join a team where your impact reaches beyond the stars! At Terran Orbital, you're not just part of the system – you're a vital force propelling our mission forward. As trailblazers in satellite manufacturing and aerospace innovation, we shatter boundaries daily to deliver groundbreaking solutions that power our nation's defense and commercial missions. We are a unique, fast growing, and trusted team dedicated to swiftly and efficiently designing, building, launching, and operating state of the art satellites for advanced mission constellations. If you're driven by purpose, inspired by challenges, and ready to leave your mark on the universe, you'll find a home and endless opportunities for growth here. Together, let's redefine what is possible in orbit and beyond! Summary Terran Orbital is seeking an experienced Sr. Spacecraft Systems Engineer to join our growing team. Reporting to the Systems Engineering Manager, the Sr. Spacecraft Systems Engineer will support the systems engineering team in the development, analysis, and definition of spacecraft designs. The Spacecraft Systems Engineer will use their technical expertise to define and manage subsystem specifications, interface control documents, the concept of operations, and system performance analyses for satellite space and ground systems. Key Duties and Responsibilities • Responsible for technical ownership of the full product lifecycle from concept through design, manufacturing, test, and verification, • Participate in the design and development of spacecraft systems, ensuring compliance with mission requirements and industry standards., • Collaborate with multidisciplinary teams to design and integrate various subsystems, including propulsion, power, communication, and thermal control., • Conduct detailed technical analyses and simulations to validate system performance and identify potential issues., • Assist in the development and management of system requirements, ensuring traceability from high-level mission objectives down to component specifications., • Work with government and commercial customers to define system requirements and coordinate all technical aspects of the mission., • Work closely with multidisciplinary engineering teams to develop optimal solutions to complex problems., • Develop system architectures that efficiently satisfy customer and internal requirements., • Perform system trade studies to balance risk, cost, and performance., • Document architecture diagrams, system interfaces, requirements, flow downs, allocations, and verification methodologies., • Prepare and lead system design reviews., • Develop and execute test plans and procedures for spacecraft systems and subsystems., • Identify, analyze, and resolve technical issues that arise during the design, development, and testing phases., • Perform requirements verification and validation activities to ensure compliance with mission goals., • BS or MS in aerospace engineering, systems engineering, or a related discipline, • 5+ years of experience in systems engineering or similar disciplines related to spacecraft, • Familiarity with satellite systems and subsystems, • Familiarity with requirements mapping and decomposition, • Familiarity with MATLAB, SolidWorks, STK, and Linux, • Familiarity with satellite system budgets including mass, power, and link budgets, • Familiarity with satellite program lifecycles, development flows, test events, and verification and validation, • U.S. Citizenship with ability to obtain and maintain DoD security clearance Your actual level and base salary will be determined case-by-case and may vary based on the job-related qualification, knowledge, skills, education, and experience. In addition to base salary, we offer 100% covered medical, dental, and vision coverage, a 401(k) match, Flexible Time Off (FTO), covered life insurance, maternity and paternity leave, tuition reimbursement, employee referrals, and lots of swag! Salary Range$130,000—$165,000 USD Benefits • 100% Company-paid comprehensive medical, dental, and vision coverage for you and your dependents, • 401(k) Match, • Flexible Time Off (FTO), • Education Reimbursement Terran Orbital is a leading manufacturer of satellite products primarily serving the aerospace and defense industries. Terran Orbital provides end-to-end satellite solutions by combining satellite design, production, launch planning, mission operations, and on-orbit support to meet the needs of the most demanding military, civil, and commercial customers. Learn more at Physical Demands An employee must meet the physical demands described to perform the essential functions of this job successfully. In performing the duties of this job, the employee is routinely required to sit or stand for long durations of time, in addition to bending, reaching, and walking. This would require the ability to lift or move objects up to 10 pounds and occasionally lift or move objects up to 25 pounds. This position is generally sedentary, with substantial computer usage. Work Environment The job operates in a professional office environment but in a manufacturing company. This job routinely uses standard office equipment such as computers, phones, photocopiers, and scanners. Disclaimers To comply with U.S. Government space technology export regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. In addition, please note that this position may require a current United States National Security clearance or eligibility for such a clearance. Terran Orbital is an Equal Opportunity/Affirmative Action Employer. We consider applicants without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender, gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, or membership in any other group protected by federal, state, or local law. If you need assistance or accommodation due to a disability, you may contact us at . Terran Orbital does not accept unsolicited resumes from recruiters, employment agencies, or staffing firms. To conduct business with Terran Orbital, a Master Services Agreement (MSA) must be executed and confirmed prior to submitting any information relating to a potential candidate. Without a signed MSA, Terran Orbital shall not be responsible to any individual or entity for any payment relating to any form of fee or compensation. And, in the event that a resume or candidate is submitted by a recruiter, an employment agency, or a staffing firm without a fully executed MSA, Terran Orbital has the unrestricted right to pursue and hire any of those candidate(s) without any legal or financial responsibility to the recruiter, agency, and/or firm.

Job Description Join a team where your impact reaches beyond the stars! At Terran Orbital, you're not just part of the system – you're a vital force propelling our mission forward. As trailblazers in satellite manufacturing and aerospace innovation, we shatter boundaries daily to deliver groundbreaking solutions that power our nation's defense and commercial missions. We are a unique, fast growing, and trusted team dedicated to swiftly and efficiently designing, building, launching, and operating state of the art satellites for advanced mission constellations. If you're driven by purpose, inspired by challenges, and ready to leave your mark on the universe, you'll find a home and endless opportunities for growth here. Together, let's redefine what is possible in orbit and beyond! Summary Terran Orbital is seeking an experienced Spacecraft Systems Engineer to join our dynamic team. Reporting to the Systems Engineering Manager the Spacecraft Systems Engineer will support the systems engineering team in the development, analysis, and definition of spacecraft designs. The Spacecraft Systems Engineer will use their technical expertise to define and manage subsystem specifications, interface control documents, the concept of operations, and system performance analyses for satellite space and ground systems. Key Duties and Responsibilities • Responsible for technical ownership of the full product lifecycle from concept through design, manufacturing, test, and verification, • Participate in the design and development of spacecraft systems, ensuring compliance with mission requirements and industry standards., • Collaborate with multidisciplinary teams to design and integrate various subsystems, including propulsion, power, communication, and thermal control., • Conduct detailed technical analyses and simulations to validate system performance and identify potential issues., • Assist in the development and management of system requirements, ensuring traceability from high-level mission objectives down to component specifications., • Work with government and commercial customers to define system requirements and coordinate all technical aspects of the mission., • Work closely with multidisciplinary engineering teams to develop optimal solutions to complex problems., • Develop system architectures that efficiently satisfy customer and internal requirements., • Perform system trade studies to balance risk, cost, and performance., • Document architecture diagrams, system interfaces, requirements, flow downs, allocations, and verification methodologies., • Prepare and lead system design reviews., • Develop and execute test plans and procedures for spacecraft systems and subsystems., • Identify, analyze, and resolve technical issues that arise during the design, development, and testing phases., • Perform requirements verification and validation activities to ensure compliance with mission goals., • BS or MS in aerospace engineering, systems engineering, or a related discipline, • 2+ years of experience in systems engineering or similar disciplines related to spacecraft, • Familiarity with satellite systems and subsystems, • Familiarity with requirements mapping and decomposition, • Familiarity with MATLAB, SolidWorks, STK, and Linux, • Familiarity with satellite system budgets including mass, power, and link budgets, • Familiarity with satellite program lifecycles, development flows, test events, and verification and validation, • 100% Company-paid comprehensive medical, dental, and vision coverage for you and your dependents, • 401(k) Match, • Flexible Time Off (FTO), • Education Reimbursement Terran Orbital is a leading manufacturer of satellite products primarily serving the aerospace and defense industries. Terran Orbital provides end-to-end satellite solutions by combining satellite design, production, launch planning, mission operations, and on-orbit support to meet the needs of the most demanding military, civil, and commercial customers. Learn more at Physical Demands An employee must meet the physical demands described to perform the essential functions of this job successfully. In performing the duties of this job, the employee is routinely required to sit or stand for long durations of time, in addition to bending, reaching, and walking. This would require the ability to lift or move objects up to 10 pounds and occasionally lift or move objects up to 25 pounds. This position is generally sedentary, with substantial computer usage. Work Environment The job operates in a professional office environment but in a manufacturing company. This job routinely uses standard office equipment such as computers, phones, photocopiers, and scanners. Disclaimers To comply with U.S. Government space technology export regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. In addition, please note that this position may require a current United States National Security clearance or eligibility for such a clearance. Terran Orbital is an Equal Opportunity/Affirmative Action Employer. We consider applicants without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender, gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, or membership in any other group protected by federal, state, or local law. If you need assistance or accommodation due to a disability, you may contact us at . Terran Orbital does not accept unsolicited resumes from recruiters, employment agencies, or staffing firms. To conduct business with Terran Orbital, a Master Services Agreement (MSA) must be executed and confirmed prior to submitting any information relating to a potential candidate. Without a signed MSA, Terran Orbital shall not be responsible to any individual or entity for any payment relating to any form of fee or compensation. And, in the event that a resume or candidate is submitted by a recruiter, an employment agency, or a staffing firm without a fully executed MSA, Terran Orbital has the unrestricted right to pursue and hire any of those candidate(s) without any legal or financial responsibility to the recruiter, agency, and/or firm.

Job Description Mechanical Engineer Job Summary The Mechanical Engineer is a key member of the Engineering team as first responder in the support of new and released products. The Mechanical Engineer shall be responsible for the design maintenance of products that have been released to Manufacturing including; support for production problems, field problems, quality problems, material obsolescence, corrective and preventive actions, and continuous improvement initiatives. The Mechanical Engineer will also make and recommend design changes through test and troubleshooting by applying principles and theories of electromechanical design, electronic circuitry and component engineering. Receives Direction From: Director of Technology and Market Development, DES Provides Direction to: No direct supervisory responsibilities Examples of Essential Functions: Mechanical: Responsibilities include, but are not limited to, the following: • Responsible for product engineering, design and documentation of existing products and extensions as required in the designated product families., • Project lead on various projects that will encompass design development, ATP's, qualification/testing and coordinating these activities with internal and external resources., • Design activities will incorporate electrical, optical, and mechanical components primarily in the Switch and Light plate business unit that may also spread into the subsystems and Data Entry Solutions businesses., • Based on the product requirements, this individual will conduct the design, generate the 3D solid modeling using the Solidworks software, and create drawings with dimensional and tolerancing information., • Assign the part numbers for each part and subassembly drawings. Create the BOM structure for transfer to manufacturing., • Interact with internal or external machine/tool shops to have the parts made., • Participate and lead in the product test and improve the design as needed. Upon the completion of the design, this individual will release final drawings into the company manufacturing database. Will also work with manufacturing engineers to develop cost effective assembly process in our facility. Optics: Performs engineering tasks including designing, developing, testing, analyzing, troubleshooting and implementing optical support for all Staco Systems business units. Creating and evaluating optical designs to meet requirements of specified applications and provides technical skills supporting research and product development. • Assist in all development phases for selected optical technologies, from inception through to product release, • Responsible for optical component and subassembly test development, data acquisition, analysis, and reporting, • Work with Mechanical Engineers and CAD Designers for prototype and pilot detailed design,, • Develops test plans, creates test procedures, performs tests and data reduction and evaluates test data. Modifies designs based upon test results, if necessary,, • Analyze problems in existing systems, plans and conducts investigations, and develops solution proposals,, • Interface with manufacturing engineering to develop and implements designs that improve manufacturability,, • Interface with manufacturing personnel to coordinate the build of modified or new prototype assemblies,, • Interfaces with purchasing to obtain prototype components for use in assemblies. Qualification Guidelines Education/training/experience: • B.S. or higher degree in Mechanical Engineering is required., • A minimum of 5 years of experience in product development from the design to manufacturing phase., • A team player with excellent oral and written communication skills and the ability to interact effectively with various departments and all level of personnel with diplomacy and emotional maturity., • Able to make independent decisions and set priorities based on technical and business trade-offs., • Be self-motivated, project and schedule driven, and able to perform tasks with minimum supervision, • Must have an entrepreneurial attitude with strong desire of not only technical side but also the financial, sales, marketing, and manufacturing practices essential to building a successful business. Knowledge of: • Basic principles of electronics, electro-mechanical devices and assembly, materials Plastic molding and stamping technology, MIL-SPEC/STD and Defense Logistics Agency requirements for switches and lighted face plates or equivalent experience., • Technical proficiency in ruggedized product design and familiarity of specifications including MIL-PRF 22885, MIL-3009, MIL-STD-810F, government agency approvals and others as needed., • Optical measuring equipment Physical Standards: • This position requires frequently sitting, standing, reaching, walking, and handling/grasping of materials in manufacturing., • This position may rarely require kneeling, bending, squatting., • Must have finger dexterity, ability to use keyboard/ten key., • Reach, stoop and lift office files, records or reports, typically weighing 20 pounds or less., • Reasonable accommodations will be considered which would allow the employee to perform the essential functions of this job., • Constantly sitting, standing, walking, and operating a computer workstation. Staco Systems is an EEO/AA M/F/V/D employer. Staco Systems does provide reasonable accommodations for individuals who are unable to use our online applicant system due to a disability. Please contact us at 949.297.8700. Job Posted by ApplicantPro

Job Description Design West Technologies Inc. is a leading provider of cutting-edge aerospace and military technologies. With a commitment to excellence and innovation, we specialize in designing, manufacturing, and delivering high-performance solutions for our clients worldwide. Our team comprises passionate professionals dedicated to pushing the boundaries of what is possible in aerospace and defense. Position Overview: We have an exciting opportunity for a Mechanical Engineer to join our DWT Research team located in Tustin, California. We are looking for someone with drive, talent, and experience in new product development. The successful candidate will report to the Engineering Program Manager of our DWT Research division and be responsible for creating and validating mechanical designs, to support business operations and customer activities. Key Job Duties: • Assess Technical Data Package (TDP) to formulate design, validation and production strategy, • Develop and maintain program-specific Design Failure Mode and Effects Analyses (DFMEAs), • Lead change control, technical issue resolution and program Engineering deliverables for sub- components and final assemblies, • Lead Design Reviews and Design for Manufacturing (DFM) analyses, • Coordinate, support and/or create 2D/3D designs in SolidWorks to package sub-components into the overall system assemblies, to support internal production and outsourcing activities, • Develop and execute Design Verification Plan (DVP), including reviewing government validation requirement, creating test procedures, planning test equipment calibration and fixtures, perform internal engineering testing and write up formal test report as needed. Maintain and release final testing report (DVP&R), • Support component and assembly builds from initial prototype through full production launch, • Track engineering issues to support regularly occurring open concerns/issues reviews, • Provide summary snapshots of program imperatives (part timing, part maturity, release status, validation status, etc.) Experience/Skills Requirements: • Min. of 5 yrs of engineering exp., preferably aerospace/automotive/ defense industries, • Experience launching new models / products through certification and into production, • Advanced and recent hands-on CAD knowledge; SolidWorks strongly preferred, • Experience in engineering risk management tools such as DFMEA and PFMEA, • Strong foundation of GD&T, tolerance stack-up analysis, • Hands-on experience with testing (from test setup and calibration to writing test procedure and test report) strongly preferred, • Experience in working with and designing electrical content like wiring harnesses, PCBA is strongly desired, • Strong communication, presentation, and interpersonal skills are required to enable an effective interface with other departments and/or professionals, • Technical background with understanding of military product developments, including military standards and specifications (MIL, etc.). Familiarity with DoD technical review process, • Ability to perform Finite Element Analysis (FEA) in SolidWorks is strongly desired, • Must be able to work both independently and in a team environment, • Must have or possess the ability to obtain U.S. Security Clearance Education Requirements: • B.S. in Mechanical Engineering required. Advanced technical degree preferred Benefits: • Comprehensive benefits package including medical, dental, and vision coverage, • 401(k) retirement savings plan, • Paid time off and holidays, • Exciting and challenging work in a dynamic industry with opportunities for growth and advancement Join our team and be a part of shaping the future of aerospace and defense technology! If you have the skills, experience, and passion to excel in this role, we encourage you to apply. Design West Technologies Inc. is an equal opportunity employer and is committed to diversity in the workplace. We encourage applications from all qualified individuals, including those with diverse backgrounds and those with disabilities.

Job Description Design West Technologies Inc. is a leading provider of cutting-edge aerospace and military technologies. With a commitment to excellence and innovation, we specialize in designing, manufacturing, and delivering high-performance solutions for our clients worldwide. Our team comprises passionate professionals dedicated to pushing the boundaries of what is possible in aerospace and defense. Position Overview: We have an exciting opportunity for a Senior Mechanical Engineer to join our DWT Research team located in Tustin, California. We are looking for someone with drive, talent, and experience in new product development. The successful candidate will report to the Engineering Program Manager of our DWT Research division and be responsible for creating and validating mechanical designs, to support business operations and customer activities. Key Job Duties: • Assess Technical Data Package (TDP) to formulate design, validation and production strategy., • Develop and maintain program-specific Design Failure Mode and Effects Analyses (DFMEAs)., • Lead Design Reviews and Design for Manufacturing (DFM) analyses., • Lead design and trade study efforts, mentor less experienced engineers, and develop design solutions to complex technical problems., • Develop and execute Design Verification Plan (DVP), including reviewing government validation requirement, creating test procedures, planning test equipment calibration and fixtures, perform internal engineering testing and write up formal test report as needed. Maintain and release final testing report (DVP&R)., • Support component and assembly build from initial prototype through full production launch., • Act as project manager as needed to support meeting project milestones. Experience/Skills Requirements: • Assess Technical Data Package (TDP) to formulate design, validation and production strategy., • Develop and maintain program-specific Design Failure Mode and Effects Analyses (DFMEAs)., • Lead Design Reviews and Design for Manufacturing (DFM) analyses., • Lead design and trade study efforts, mentor less experienced engineers, and develop design solutions to complex technical problems., • Develop and execute Design Verification Plan (DVP), including reviewing government validation requirement, creating test procedures, planning test equipment calibration and fixtures, perform internal engineering testing and write up formal test report as needed. Maintain and release final testing report (DVP&R)., • Support component and assembly build from initial prototype through full production launch., • Act as project manager as needed to support meeting project milestones., • Minimum of 5 years of engineering experience, preferably aerospace/automotive/ defense industries., • Experience with system engineering and/or power electronics development strongly preferred., • Proven track record of designing and developing complex mechanical systems and launching such products into production., • Advanced and recent hands-on SolidWorks knowledge., • Experience in engineering risk management tools such as DFMEA and PFMEA., • Strong foundation of GD&T, tolerance stack-up analysis. Education Requirements: • B.S. in Mechanical Engineering required. Advanced technical degree preferred. Special Skills, Knowledge and/or Abilities: • Strong communication, presentation, and interpersonal skills are required to enable an effective interface with other departments and/or professionals., • Technical background with understanding of military product developments, including military standards and specifications (MIL, etc.). Familiarity with DoD technical review process., • Ability to perform Finite Element Analysis (FEA) and Computational Fluid Dynamics (CFD) in SolidWorks is strongly desired., • Must be able to work both independently and in a team environment Benefits: Join our team and be a part of shaping the future of aerospace and defense technology! If you have the skills, experience, and passion to excel in this role, we encourage you to apply. Design West Technologies Inc. is an equal opportunity employer and is committed to diversity in the workplace. We encourage applications from all qualified individuals, including those with diverse backgrounds and those with disabilities.

Job Description At Turion Space, we’re building spacecraft to secure Earth and expand humanity’s reach beyond it. As part of our Propulsion team, you’ll help design and build the satellites and mechanisms that make our missions possible. As a Mechanical Engineer on the Propulsion team, you’ll work across the full development lifecycle from early concept and detailed design through analysis, fabrication, integration, and testing. You’ll collaborate closely with a multidisciplinary team to deliver flight hardware that is robust, reliable, and ready for space. This role is on site at our Irvine, CA HQ. Key Responsibilities * Design propellant management subsystems and/or other propulsion subsystems under accelerated timelines * Review specifications and other engineering data to develop mechanical systems * Update designs and drawings through engineering change orders to support our rapid pace of design iteration * Create detailed component and assembly drawings incorporating an understanding of GD&T and tolerance stack-ups * Generate manufacturing and assembly methods for designs Minimum Qualifications * Bachelor's Degree in an engineering discipline * 1+ years of mechanical design and drafting experience (including internship experience) * Experience with 3D CAD software (SolidWorks preferred) * Experience developing a propellant management system * Solid understanding and application of GD&T and tolerance stack-ups * Must be able to obtain a Secret and/or a TS/SCI clearance. Preferred Qualifications * Hands-on experience working on teams designing hardware in a highly constrained system under defined timelines * Experience working in aerospace or space technology sectors, including understanding of the unique requirements and challenges associated with mechanical systems for space missions * Experience working with welded structures, fluid systems, manifold design, piping, valves, or propellant tanking * Ability to document and present technical information clearly Mechanical Engineer (Propulsion): $115,000 - $150,000 USD ITAR Requirements: This position may include access to technology and/or software source code that is subject to U.S. export controls. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Benefits: We offer a comprehensive compensation and benefits package designed to support the well-being and professional growth of our employees. In addition to a competitive base salary and company stock, determined by factors such as job-related knowledge, education, skills, experience, and market demand, full-time employees are eligible for: * Equity: Receive equity in Turion Space, letting you benefit from the company's success * Health Insurance: Comprehensive medical, dental, and vision coverage for employees and their dependents. * Retirement Plans: Access to a 401(k) plan to help you plan for your future. * Paid Time Off: Generous vacation days, personal days, sick days, and holidays to ensure you have time to recharge. * Professional Development: Opportunities for ongoing training, workshops, and courses to advance your skills and career growth. * Team Building Activities: Regular social events, team outings, and company-sponsored activities to foster a positive work environment. We are dedicated to providing a supportive and enriching environment for our team members, recognizing that our collective success is built upon the well-being and satisfaction of each individual. Turion Space is an Equal Opportunity Employer; employment with Turion Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Compensation Range: $115K - $150K

Job DescriptionSalary: $25.00-$30.00/ Hour DUTIES INCLUDE: • Perform machine set up and shut down., • Program parts for machining., • Operate CNC machine., • Perform routine maintenance on machine., • Interpret part prints and step files using Solidworks., • Deburr and polish parts., • Request raw materials and tooling as necessary., • Work with Development Department on new designs., • Quality check manufactured parts., • Perform other duties as assigned by manager. REQUIREMENTS: • Knowledge of CNC tooling and related hardware., • Skilled in verbal communication, • Ability to read part prints., • Accomplish work utilizing and abiding by ISO requirements and safety procedures., • Strong attention to detail., • Knowledge of the Microsoft Office Suite, Solidworks, and Camworks programs., • Knowledge of FANUC G-code programming., • Knowledge of Haas controls., • Able to lift 50+ lbs., • Succeeds in self-management., • Strong problem-solving ability. QUALIFICATIONS: • Preferred Machinist Associate's Degree, • Preferred 4-5 years of experience in related field, • Experience Using BobCAM software is a Plus, • Experience Using Haas brand 3 Axis Mills is a Plus PHYSICAL REQUIREMENTS: • Ability to stand for extended periods and perform repetitive tasks., • Ability to lift or move materials weighing up to 50 pounds., • Fine motor skills for handling small parts and tools. WORK ENVIRONMENT: • Comfortable working in a manufacturing environment with exposure to loud noise, dust, and machinery. Personal protective equipment (PPE) is required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job. COMPENSATION AND BENEFITS: • $25-30/hour, • Health, dental, vision, 401K match, life insurance, paid time off

Job Description As a Senior Spacecraft Mechanism Design Engineer, you will conceive, design, and implement complex electromechanical spacecraft mechanisms. You will be part of the mechanical engineering team and work on the conceptual, preliminary, and detailed design, analysis, fabrication, and testing of our vehicles and mechanisms. You’re able to brainstorm concepts and solutions and generate detailed specifications & drawings and analyze static and dynamic structures to quantify performance. Key Responsibilities * Design and Development: Conceive, develop and design precision electromechanical systems for the extreme conditions encountered in space environments. A deep understanding of electromechanical design, normally acquired with several years of precision machine design experience, is integral to this position. Ensure designs meet mission requirements and industry standards. * Integration: Work with engineering teams to integrate mechanical systems into spacecraft and satellite platforms. Ensure compatibility with electrical, thermal, and software systems. * Testing and Validation: Create and execute test plans for mechanical systems. Perform performance and reliability testing to validate system functionality and compliance with specifications. * Problem-Solving: Address and resolve technical issues related to mechanical systems. Troubleshoot problems and implement corrective actions as needed. * Documentation: Prepare and maintain accurate documentation, including design specifications, test reports, and technical manuals. Ensure all documentation meets company and industry standards. * Collaboration: Collaborate with cross-functional teams, including electrical engineers, software engineers, and mission planners, to address and resolve integration and performance issues. Required Qualifications * Education: Bachelor’s degree in mechanical engineering, Aerospace Engineering, or a related field. * Experience: 15+ years of experience in mechanical engineering, with experience in designing and developing high precision electromechanical systems for extreme environments. Experience with spacecraft or high-tech industries is a plus. * Technical Skills: Knowledge of mechanical system design, structural analysis, kinematics, dynamics, electric motors, actuators, and controls. Proficiency with engineering tools and software for design and simulation (e.g., SolidWorks). * Experience with 3D CAD, 2D drafting, GD&T, and tolerance analysis * Problem-Solving: Strong analytical and problem-solving skills, with the ability to troubleshoot and resolve technical issues. * Communication: Effective verbal and written communication skills, with the ability to present technical information clearly and collaborate with team members. * Must be able to obtain a Secret and/or a TS/SCI clearance. Required Qualifications * Education: Master’s degree in mechanical engineering or a related field. * Experience: 15+ years of experience in machine design, with significant experience in aerospace or space technology sectors, including an in-depth understanding of the unique requirements and challenges associated with mechanical systems for space missions. Experience with satellite systems is a plus * Advanced Skills: Expertise in mechanical systems design and integration techniques as applied to motors, electronic components, bearings, gears, power screws, springs, clutches, brakes, materials, lubrication, and coating selection. Familiarity with high-stress materials, thermal control systems, and space-qualified components. * Innovation: Demonstrated ability to contribute to innovative mechanical system designs and improvements. * Advanced, hands-on skills with machine tools and various fabrication techniques. Senior Spacecraft Mechanism Design Engineer: $140,000 - $180,000 USD ITAR Requirements: This position may include access to technology and/or software source code that is subject to U.S. export controls. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Benefits: We offer a comprehensive compensation and benefits package designed to support the well-being and professional growth of our employees. In addition to a competitive base salary and company stock, determined by factors such as job-related knowledge, education, skills, experience, and market demand, full-time employees are eligible for: * Equity: Receive equity in Turion Space, letting you benefit from the company's success * Health Insurance: Comprehensive medical, dental, and vision coverage for employees and their dependents. * Retirement Plans: Access to a 401(k) plan to help you plan for your future. * Paid Time Off: Generous vacation days, personal days, sick days, and holidays to ensure you have time to recharge. * Professional Development: Opportunities for ongoing training, workshops, and courses to advance your skills and career growth. * Team Building Activities: Regular social events, team outings, and company-sponsored activities to foster a positive work environment. We are dedicated to providing a supportive and enriching environment for our team members, recognizing that our collective success is built upon the well-being and satisfaction of each individual. Turion Space is an Equal Opportunity Employer; employment with Turion Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Compensation Range: $140K - $180K

Job DescriptionSalary: $30.00-$35.00/ Hour DUTIES INCLUDE: • Perform machine set up and shut down., • Program parts for machining., • Operate CNC machine., • Perform routine maintenance on machine., • Interpret part prints and step files using Solidworks., • Deburr and polish parts., • Request raw materials and tooling as necessary., • Work with Development Department on new designs., • Quality check manufactured parts., • Perform other duties as assigned by manager. REQUIREMENTS: • Knowledge of CNC tooling and related hardware., • Skilled in verbal communication, • Ability to read part prints., • Accomplish work utilizing and abiding by ISO requirements and safety procedures., • Strong attention to detail., • Knowledge of the Microsoft Office Suite, Solidworks, and Camworks programs., • Knowledge of FANUC G-code programming., • Knowledge of Haas controls., • Able to lift 50+ lbs., • Succeeds in self-management., • Strong problem-solving ability. QUALIFICATIONS: • Preferred Machinist Associate's Degree, • Preferred 6-10 years of experience in related field, • Experience Using BobCAM software is a Plus, • Experience Using Haas brand 3 Axis Mills is a Plus PHYSICAL REQUIREMENTS: • Ability to stand for extended periods and perform repetitive tasks., • Ability to lift or move materials weighing up to 50 pounds., • Fine motor skills for handling small parts and tools. WORK ENVIRONMENT: • Comfortable working in a manufacturing environment with exposure to loud noise, dust, and machinery. Personal protective equipment (PPE) is required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job. COMPENSATION AND BENEFITS: • $30-35/hour, • Health, dental, vision, 401K match, life insurance, paid time off

Job Description Design West Technologies Inc. is a leading provider of cutting-edge aerospace and military technologies. With a commitment to excellence and innovation, we specialize in designing, manufacturing, and delivering high-performance solutions for our clients worldwide. Our team comprises passionate professionals dedicated to pushing the boundaries of what is possible in aerospace and defense. Position Overview: Work closely with project and engineering releases, production planning, and production personnel in developing work order routers and manufacturing documentation to process parts and materials. Select resources to manufacture parts effectively, provide instructions to maximize repeatability, and implement strategies to improve productivity. Provide estimates on material costs, special processing, and labor requirements for new products. Lead projects to Improve machining, fabrication, and assembly operations, by reducing operating costs, reducing lead time, and improving product quality. Key Job Duties: -Review drawings for manufacturability, verify accuracy, and completeness -Determine appropriate processes, work centers, and instructions to create and maintain routers -Develop manufacturing routers: The set of detailed work instructions defining the sequence of operations, resources, labor standards, and special instructions required to manufacture a part -Ensure router standards, operation structure, and BOM are accurate -Problem-solve technical issues by interfacing with product engineering, SME's, and production personnel -Develop and implement work instructions, procedures, and other manufacturing documentation to enhance customer satisfaction and manufacturing performance -Identify and implement manufacturing process solutions that will assist the department in achieving high quality, cost savings, and shortened lead times -Influence process standardization, the development of work center capabilities and improving capacities -Initiate and Submit Engineering Change Requests for "Red-lined" Drawings: -Use the Engineering Change Requests to initiate changes to design, drawing, and/or process -Provide technical support to manufacturing shop as needed -Stay abreast of changes in technology that will improve manufacturing efficiency -Create leaner, more efficient and more profitable business practices Requirements: -B.S. Degree in Manufacturing and/or Mechanical Engineering -Minimum of 2 years engineering experience in low volume/high mix manufacturing environments -Preferred experience with SolidWorks, AutoCAD, and CAD/CAM applications -Working knowledge of NC/CNC machines (3-4-5 Axis Milling, Turning, and Boring) -Fixture Design / Work holding - Experience with design of fixtures and work holding -Confident Presentation and Communication skills -Collaborator and Team-minded -Strong Customer focus -Exceptional Critical Thinking abilities and Problem-Solving capabilities -Detailed analysis and evaluation practices -Mechanical aptitude -Knowledgeable about Materials: Strengths, Mechanicals, Chemistry (Steels, Alloys, forgings, castings) -Experienced with Non-destructive examination (NDE) testing and application -Capable of Geometric Dimensioning and Tolerancing (GD&T) -Capable of using inspection devices (micrometers, calipers, height gages, ring/plug gages) Benefits: -Competitive salary commensurate with experience -Comprehensive benefits package including medical, dental, and vision coverage -401(k) retirement savings plan -Paid time off and holidays -Exciting and challenging work in a dynamic industry with opportunities for growth and advancement Join our team and be a part of shaping the future of aerospace and defense technology! If you have the skills, experience, and passion to excel in this role, we encourage you to apply. Design West Technologies Inc. is an equal opportunity employer and is committed to diversity in the workplace. We encourage applications from all qualified individuals, including those with diverse backgrounds and those with disabilities.

Job DescriptionDescription: Job Summary: The Mechanical Engineer is responsible for designing, analyzing, and documenting mechanical systems and components used in ruggedized enclosures and rack systems for aerospace and defense applications. This role requires advanced proficiency in CAD and FEA tools, collaboration with cross-functional teams, and strict adherence to industry standards (AS9100, DoD, NASA, MIL-STD). The position contributes directly to product reliability, manufacturability, and compliance while supporting continuous improvement initiatives across engineering processes. Key Responsibilities: · Design mechanical systems and components for ruggedized enclosures and rack systems, ensuring compliance with program specifications and industry standards. · Perform engineering analyses, including stress, thermal, vibration, and fatigue analysis using FEA tools, and document results in formal engineering reports. · Develop and maintain CAD models, detailed engineering drawings, and bills of material (BOMs) in accordance with ASME Y14.5 (GD&T). · Collaborate with cross-functional teams including systems, electrical, and manufacturing engineers to ensure design compatibility and top performance. · Participate in design reviews, root cause analyses, and failure investigations, and root cause analyses; track and close corrective actions to completion. · Support prototyping, integration, and assembly of new designed hardware by providing build instructions, tooling specifications, and hands-on technical guidance. · Ensure compliance with AS9100, ITAR, DoD and customer/regulatory requirements throughout the design lifecycle. · Contribute to process improvements by documenting best practices, developing checklists, and recommending new tools or methods. Required Qualifications: · Bachelor’s degree in Mechanical Engineering or related field (Master’s preferred). · Minimum of 10 years of progressive experience in mechanical design and engineering, preferably within aerospace/defense. · Demonstrated proficiency in 3D CAD software (SolidWorks, AutoCAD, or equivalent) with a track record of producing accurate drawings and models. · Hands-on experience performing FEA and thermal analysis, with ability to interpret and act on results. · Familiarity with equipment materials, manufacturing techniques, and environmental considerations. · Strong working knowledge of aerospace materials and manufacturing processes, with expertise in GD&T, tolerance analysis, and configuration management. · Excellent written and verbal communication skills with experience presenting technical findings to cross-functional teams. · Proven ability to manage multiple projects, priorities, and deadlines in a regulated, fast-paced environment. Preferred Qualifications: · Experience working on aircraft systems or defense-related programs. · Knowledge of aerospace standards (e.g., MIL-STD, FAA specifications). · Hands-on experience with prototyping, machining, and assembly in an R&D or production environment. · Current or active U.S. Government Security Clearance, or ability to obtain one. Physical Requirements: · Must be able to sit or stand for extended periods and frequently perform tasks that require repetitive motion, such as typing on a keyboard. · Regular use of a computer, telephone, and headset is required, including participation in virtual meetings via Microsoft Teams. · This is primarily an office-based role located within a shared open-concept office inside a warehouse facility. The work environment may include elevated noise levels due to open workspaces and conversational noise. Employees should be comfortable working in a setting where sound carries and interruptions may occur. · Position may require occasional lifting of up to 25 pounds when assisting with prototypes or hardware. Additional Information: The Key Responsibilities are an outline of the general nature and level of work performed by individuals assigned to this position. It is not intended to be an exhaustive list of all duties, responsibilities, and qualifications. The company may amend or modify duties based on business needs in accordance with applicable California labor laws. Reasonable accommodations may be made for qualified individuals with disabilities. Equal Opportunity Employer Statement: Brandywine Communications is an Equal Opportunity Employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender identity or expression, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, marital status, military or veteran status, or any other characteristic protected by federal, state, or local laws. Brandywine Communications strives to create a workplace that is inclusive, respectful, and reflective of the diverse communities we serve. We are committed to providing reasonable accommodations for qualified individuals with disabilities in accordance with applicable laws. If you require accommodation during any part of the application or hiring process, please contact Human Resources at . Requirements:

Job Description About ClearPath Medical ClearPath Medical is a fast-growing, FDA-registered, ISO 13485-certified contract manufacturer specializing in the design, development, and production of custom medical cables and associated devices. We partner with leading medical device companies to deliver reliable, innovative solutions that improve patient outcomes. Position Summary We are seeking a hands-on Automation Engineer to join our team and drive innovation in manufacturing automation, tooling, and fixtures. This role will be responsible for assessing needs, designing solutions, and implementing automation technologies to support and scale ClearPath's production of medical devices. The ideal candidate will thrive in a collaborative environment, bringing strong technical skills and a passion for building efficient, reliable systems. Key Responsibilities • Assess production processes to identify opportunities for automation and efficiency improvements., • Design, develop, and implement automated systems, fixtures, and tooling to support manufacturing operations., • Program, troubleshoot, and maintain PLC-based control systems and related automation technologies., • Integrate and deploy collaborative robots (cobots) for manufacturing applications., • Design fixturing and automation components using SolidWorks., • Utilize tool room equipment to fabricate, assemble, and validate automation solutions., • Collaborate cross-functionally with engineering, quality, and production teams to ensure solutions meet technical and regulatory requirements., • Bachelors degree in Mechanical, Electrical, or Mechatronics Engineering (or equivalent experience)., • Minimum 2-3 years of focused experience in automation engineering within a manufacturing environment., • Hands-on experience with PLC programming and core automation principles., • Preferable experience with cobot integration (e.g., UR, FANUC, or similar platforms)., • Proficiency in SolidWorks for fixturing and tooling design., • Practical experience building automation systems using tool room equipment., • Strong troubleshooting, problem-solving, and project management skills., • Be part of a rapidly growing company making a direct impact in the medical device industry., • Work on diverse projects that combine creativity, engineering, and innovation., • Collaborative, team-oriented culture where your contributions matter., • Competitive compensation and benefits package.

Job Description Join a team where your impact reaches beyond the stars! At Terran Orbital, you're not just part of the system – you're a vital force propelling our mission forward. As trailblazers in satellite manufacturing and aerospace innovation, we shatter boundaries daily to deliver groundbreaking solutions that power our nation's defense and commercial missions. We are a unique, fast growing, and trusted team dedicated to swiftly and efficiently designing, building, launching, and operating state of the art satellites for advanced mission constellations. If you're driven by purpose, inspired by challenges, and ready to leave your mark on the universe, you'll find a home and endless opportunities for growth here. Together, let's redefine what is possible in orbit and beyond! Summary Terran Orbital is seeking an experienced Sr. Spacecraft Thermal Engineer to join our growing team. Reporting to the Thermal Engineering Manager, the Sr. Spacecraft Thermal Engineer will be involved in all aspects of a spacecraft's development. They will support spacecraft thermal systems configuration from the concept level through design reviews, design verification, and operations. In addition to predictive and analytical work, the Sr. Engineers may serve in team leadership roles or as subject area experts. Key Duties and Responsibilities • Work with a multidisciplinary team to reduce thermal risk by identifying the constraining elements of a thermal design and recommend mitigation strategies from the concept level to design, production, and operation., • Work with spacecraft system engineers to translate spacecraft CONOPS (Concept of Operations) into representative thermal design scenarios., • Develop thermal models of active and passive thermal designs using a mixture of numerical solutions and hand calculations of spacecraft systems, subsystems, avionics, and mechanisms that predict temperature margins in a variety of thermal space environments/, • Participate in spacecraft build and testing campaigns related to the thermal design aspect of the spacecraft including periods of off-hours or on-call work., • Develop thermal verification test plans and support test activities, monitor and correlate test results to model predictions., • Prepare technical documents and PowerPoint presentations to present the results of analysis and tests to Managers, Customers, and/or Stakeholders, • Support Business Development activities, including proposals, white papers, and requests for information., • Develop tools to support concept trade studies and post-processing analysis., • Bachelor's degree in mechanical or aerospace engineering with a Thermal focus or similar discipline., • Minimum of five (5) years of direct experience working on space applications., • Must have experience leading teams and mentoring entry-level engineers., • Proficiency with Thermal Desktop is a must., • Must possess an understanding of the basic principles of radiation and conduction heat transfer in conjunction with space environment heating effects and parameters associated with spaceflight applications., • Deep understanding of orbital mechanics and thermal design considerations with respect to MEO, LEO, GEO, and other orbits., • Proven knowledge of spacecraft mission design and associated subsystems/architecture as relates to thermal design., • Strong knowledge of spacecraft thermal design management and surface treatments., • Experience with process development, as pertains to thermal analysis methods, testing methods or model correlation., • Knowledge of environmental requirements, engineering, thermal vacuum/ambient pressure testing, and hands-on engineering project experience, including use of data acquisition systems., • Comfortable working in a fast-paced, start-up environment with a strong desire to be a leader/key contributor on a small team., • Highly responsible team player with a positive attitude and excellent communication and documentation skills., • Experience with SolidWorks or other CAD software., • Experience developing detailed thermal and simplified thermal models for spacecraft systems, subsystems, and components., • Proficiency with computational scripting languages (MATLAB, Python, Mathematica, etc.)., • Master of Science degree in Mechanical or Aerospace engineering with a Thermal focus or similar discipline., • Master of Science degree substitutes for two years of experience., • Ph.D. degree substitutes for five years of experience., • Experience with technical leadership responsibilities, such as serving on Risk Reduction teams or as Subject Area Expert., • Ownership of technical issues with respect to Engineering Review Boards, NCRs and other engineering anomalies with the expectation of bringing it to resolution., • Experience with build integration and testing of propulsion, thermal, electrical, and structural systems; including, but not limited to, vibration, shock, thermal, vacuum, and radiation testing., • 100% Company-paid comprehensive medical, dental, and vision coverage for you and your dependents, • 401(k) Match, • Flexible Time Off (FTO), • Education Reimbursement Terran Orbital is a leading manufacturer of satellite products primarily serving the aerospace and defense industries. Terran Orbital provides end-to-end satellite solutions by combining satellite design, production, launch planning, mission operations, and on-orbit support to meet the needs of the most demanding military, civil, and commercial customers. Learn more at Physical Demands An employee must meet the physical demands described to perform the essential functions of this job successfully. In performing the duties of this job, the employee is routinely required to sit or stand for long durations of time, in addition to bending, reaching, and walking. This would require the ability to lift or move objects up to 10 pounds and occasionally lift or move objects up to 25 pounds. This position is generally sedentary, with substantial computer usage. Work Environment The job operates in a professional office environment but in a manufacturing company. This job routinely uses standard office equipment such as computers, phones, photocopiers, and scanners. Disclaimers To comply with U.S. Government space technology export regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. In addition, please note that this position may require a current United States National Security clearance or eligibility for such a clearance. Terran Orbital is an Equal Opportunity/Affirmative Action Employer. We consider applicants without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender, gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, or membership in any other group protected by federal, state, or local law. If you need assistance or accommodation due to a disability, you may contact us at . Terran Orbital does not accept unsolicited resumes from recruiters, employment agencies, or staffing firms. To conduct business with Terran Orbital, a Master Services Agreement (MSA) must be executed and confirmed prior to submitting any information relating to a potential candidate. Without a signed MSA, Terran Orbital shall not be responsible to any individual or entity for any payment relating to any form of fee or compensation. And, in the event that a resume or candidate is submitted by a recruiter, an employment agency, or a staffing firm without a fully executed MSA, Terran Orbital has the unrestricted right to pursue and hire any of those candidate(s) without any legal or financial responsibility to the recruiter, agency, and/or firm.

Job Description Position: Packaging Design Engineer – Cosmetics (Primary & Secondary Packaging) Location: Irvine, CA (Onsite, Daily) (prefer local candidates) Duration: 24+ Month Contract Assignment Industry: Cosmetics / Beauty / Consumer Goods I am looking for a highly skilled and detail-oriented Packaging Design Engineer with expertise in both primary and secondary packaging to support the development of innovative and sustainable packaging solutions for cosmetic and beauty products. This is a daily onsite role based in Irvine, CA, supporting a 24-month strategic initiative with one of the industry’s leading brands. Key Responsibilities: • Execute the design and engineering of primary packaging (jars, bottles, pumps, droppers, compacts, etc.) and secondary packaging (cartons, sleeves, inserts, kits, shippers)., • Collaborate cross-functionally with Marketing, R&D, Operations, and Quality teams to align packaging with brand aesthetics, functional requirements, and regulatory standards., • Translate marketing briefs and concept designs into manufacturable packaging solutions using CAD tools and prototyping methods., • Work with external vendors and internal teams to validate materials, conduct line trials, and ensure DFM (Design for Manufacturing)., • Drive timelines and deliverables across development phases – concept, feasibility, design, testing, and production launch., • Manage and maintain technical specifications, BOMs, and packaging documentation., • Ensure packaging meets performance standards (drop test, compatibility, stability, etc.) and sustainability goals., • Bachelor’s degree in Packaging Engineering, Mechanical Engineering, Industrial Design, or related field., • 3–7 years of experience in packaging engineering, preferably within the cosmetics, beauty, or personal care industry., • Proven experience designing both primary and secondary packaging., • Proficient in 3D CAD software (e.g., SolidWorks, NX, or similar)., • Strong knowledge of materials: plastics, glass, paperboard, foils, and eco-friendly alternatives., • Hands-on experience working with suppliers and manufacturers., • Excellent project management, problem-solving, and communication skills., • Comfortable working in a fast-paced, creative environment., • Must be able to work onsite daily in Irvine, CA., • Experience in sustainability packaging initiatives., • Knowledge of cosmetic packaging compliance (e.g., FDA, Prop 65, etc.). Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or genetic information. Company DescriptionSterling has helped build careers for thousands for professionals like yourself. Our expert recruiters support you at every step in the process and as a Best of Staffing company, Sterling provides exciting work with exceptional employers across the U.S.Sterling has helped build careers for thousands for professionals like yourself. Our expert recruiters support you at every step in the process and as a Best of Staffing company, Sterling provides exciting work with exceptional employers across the U.S.

Job Description Rapidly growing commercial job shop looking for a leader and team builder to oversee the day to day. We currently have 14-16 machine shop floor employees spread across 2 shifts. Equipment includes 25 CNC Mills and Lathes and a host of common machine shop support equipment. Requirements for consideration of this position include: • 5-7 years’ experience with CNC lathes and mills, • 2-3 years’ experience managing machine shop personnel, • Familiarity with all common machine shop measuring tools, • Understanding of GD&T and basic blue print reading, • Strong knowledge of G-code programming and machine set up principals, • Excellent communication and organizational skills, • The ability and desire to overcome any obstacles to “get the job done”, • Most importantly, a positive attitude and ability to lead and work with others Additional beneficial experience would include: • working knowledge Solidworks and MasterCam programming software, • Experience with process improvement and Lean Manufacturing Supervisor position responsibilities include and are not limited to: • Assisting machinists in setting up and troubleshooting CNC machines for efficient operation, • Supervision of all shop floor employees, • Scheduling and ensuring the success of Evening and Weekend shifts, • Availability to work weekends/evenings as required, • Tracking WIP to insure on time delivery, • Maintaining clean, safe, organized shop floor, • Working with tool vendors to insure availability of necessary cutting tools, • Organizing machine program files and set up sheets for repeat job runs, • Interfacing with CAM programmers in developing reliable efficient tool path, • Working with Quality Department to insure production of print compliant parts, • Maintaining and enforcing all existing policies and procedures Why Choose Us? Continual Growth: Work in our 15,000 sq. ft. manufacturing facility and engage in comprehensive services such as CNC milling, turning, cosmetic finishing, precision lasering, 3D designs, and prototyping for both short and long production runs. Commitment to Quality: Be part of a team dedicated to delivering exceptional precision and exceeding client expectations with our expertise and craftsmanship. Opportunities for Advancement: As we continue to expand, we offer our employees opportunities for professional development and career advancement. Join us to contribute to innovative projects and refine your skills in a supportive environment. Apply today and join Custom Machining Service Inc. Help us shape the future of precision manufacturing!Custom Machining Service Inc. is seeking dedicated individuals to join our growing team. We specialize in precision machining for a variety of industries including medical device, electronics, aerospace, commercial/industrial, and transportation. \r\n\r\nWhy Choose Us?\r\n\r\nContinual Growth:\r\nWork in our 15,000 sq. ft. manufacturing facility and engage in comprehensive services such as CNC milling, turning, cosmetic finishing, precision lasering, 3D designs, and prototyping for both short and long production runs. \r\n\r\nCommitment to Quality: \r\nBe part of a team dedicated to delivering exceptional precision and exceeding client expectations with our expertise and craftsmanship. \r\n\r\nOpportunities for Advancement:\r\nAs we continue to expand, we offer our employees opportunities for professional development and career advancement. Join us to contribute to innovative projects and refine your skills in a supportive environment.\r\n\r\nApply today and join Custom Machining Service Inc. Help us shape the future of precision manufacturing!

Job DescriptionDraftsman CAD Draftsman Position Overview We are seeking a skilled CAD Draftsman to join our engineering team. The successful candidate will be responsible for producing detailed technical drawings and plans using AutoCAD. The ideal candidate will have a strong background in mechanical engineering and will collaborate closely with engineers to ensure accuracy and compliance with project specifications. Key Responsibilities • Prepare detailed CAD drawings and plans based on engineering specifications., • Collaborate with engineers and designers to understand project requirements and objectives., • Review and revise drawings as necessary to ensure accuracy and adherence to standards., • Maintain organized records of drawings and revisions for reference and compliance purposes., • Assist in the development of design concepts and presentations as needed.Qualifications, • Bachelor's degree in Mechanical Engineering or related field., • Proficiency in AutoCAD software is required., • Strong understanding of mechanical engineering principles and practices., • Experience in drafting and drawing is a plus. What We Offer • Competitive salary commensurate with experience, • Comprehensive benefits package, • Professional development opportunities Submit resume and portfolio of technical drawings demonstrating AutoCAD and SolidWorks proficiency. Job Type: Full-time Benefits: • 401(k) matching, • Dental insurance, • Employee discount, • Health insurance, • Life insurance, • Paid time off, • Vision insurance - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. CyberCoders will consider for Employment in the City of Los Angeles qualified Applicants with Criminal Histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring (Ban the Box) Ordinance.This job was first posted by CyberCoders on 09/25/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job DescriptionSr Manufacturing Engineer - CNC, BSME, Materials High-mix, GD&T Senior Manufacturing Engineer - CNC/Low-volume/high-mix Location: ONLY On-site Option Available - NO Hybrid work options Employment Type: Full-Time/Direct hire Industry: Precision Manufacturing / Industrial Engineering for DOD/Defense/Aerospace parts and products. Are you a hands-on manufacturing engineer with deep expertise in CNC machining and materials science? We're seeking a seasoned professional to join a dynamic production environment focused on low-volume, high-mix operations for a Sr Manufacturing Engineering role that is ideal for someone who thrives in complex fabrication settings and enjoys driving process improvements from concept to execution. What You'll Do • Manufacturing Process Development: Create and maintain detailed manufacturing workflows, including operation sequences, labor standards, and tooling requirements for machined and fabricated components., • CNC & Machining Expertise: Optimize setups and processes for multi-axis CNC equipment (3-, 4-, and 5-axis milling, turning, boring), ensuring repeatability and precision., • Materials Engineering: Apply deep knowledge of metals and alloys (steels, castings, forgings) to select appropriate materials and treatments for durability, performance, and cost-efficiency., • Documentation & Routing: Develop and maintain accurate work instructions, BOMs, and routing documentation to support production teams., • Process Optimization: Lead initiatives to reduce cycle times, improve quality, and lower operating costs across machining, fabrication, and assembly operations., • Technical Support: Collaborate with design engineers and production staff to resolve manufacturability issues and implement engineering changes., • Inspection & Quality: Utilize GD&T principles and precision measurement tools (micrometers, calipers, gauges) to validate part conformance and support NDE testing protocols.What You Bring, • Bachelor's degree in Mechanical or Manufacturing Engineering (or equivalent experience), • Five or more years of experience in a low-volume, high-mix manufacturing environment, • Strong background in CNC machining and fixture/workholding design, • Proficiency in CAD/CAM tools (SolidWorks, AutoCAD preferred), • Familiarity with non-destructive testing methods and material properties, • Excellent problem-solving and critical thinking skills, • Ability to communicate technical concepts clearly across teams, • Passion for continuous improvement and lean manufacturing principles Please get in touch if this sounds like a possible fit and I would be happy to discuss the details of the role, and your search goals. You can reach me at Benefits * Competitive salary commensurate with experience. * Comprehensive benefits package including medical, dental, and vision coverage. * 401(k) retirement savings plan. * Paid time off and holidays. * Exciting and challenging work in a dynamic industry with opportunities for growth and advancement. • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. CyberCoders will consider for Employment in the City of Los Angeles qualified Applicants with Criminal Histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring (Ban the Box) Ordinance.This job was first posted by CyberCoders on 09/15/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job DescriptionPosition: Packaging Design Engineer – Cosmetics (Primary & Secondary Packaging) Location: Irvine, CA (Onsite, Daily) (prefer local candidates) Duration: 24+ Month Contract Assignment Industry: Cosmetics / Beauty / Consumer Goods I am looking for a highly skilled and detail-oriented Packaging Design Engineer with expertise in both primary and secondary packaging to support the development of innovative and sustainable packaging solutions for cosmetic and beauty products. This is a daily onsite role based in Irvine, CA, supporting a 24-month strategic initiative with one of the industry’s leading brands. Key Responsibilities: • Execute the design and engineering of primary packaging (jars, bottles, pumps, droppers, compacts, etc.) and secondary packaging (cartons, sleeves, inserts, kits, shippers)., • Collaborate cross-functionally with Marketing, R&D, Operations, and Quality teams to align packaging with brand aesthetics, functional requirements, and regulatory standards., • Translate marketing briefs and concept designs into manufacturable packaging solutions using CAD tools and prototyping methods., • Work with external vendors and internal teams to validate materials, conduct line trials, and ensure DFM (Design for Manufacturing)., • Drive timelines and deliverables across development phases – concept, feasibility, design, testing, and production launch., • Manage and maintain technical specifications, BOMs, and packaging documentation., • Ensure packaging meets performance standards (drop test, compatibility, stability, etc.) and sustainability goals., • Stay current with industry trends, materials, and innovations in cosmetic packaging.QUALIFICATIONS, • Bachelor’s degree in Packaging Engineering, Mechanical Engineering, Industrial Design, or related field., • 3–7 years of experience in packaging engineering, preferably within the cosmetics, beauty, or personal care industry., • Proven experience designing both primary and secondary packaging., • Proficient in 3D CAD software (e.g., SolidWorks, NX, or similar)., • Strong knowledge of materials: plastics, glass, paperboard, foils, and eco-friendly alternatives., • Hands-on experience working with suppliers and manufacturers., • Excellent project management, problem-solving, and communication skills., • Comfortable working in a fast-paced, creative environment., • Must be able to work onsite daily in Irvine, CA., • Experience in sustainability packaging initiatives., • Knowledge of cosmetic packaging compliance (e.g., FDA, Prop 65, etc.).

Job DescriptionSr Mechanical Engineer/Mechanical Design Engineer Senior Mechanical Engineer - Product Development & Validation Location: Santa Ana, CA ( Orange County, CA) Employment Type: Full-Time and Direct-Hire Industry: Aerospace / Automotive / Defense Engineering A dynamic engineering team is seeking a Senior Mechanical Engineer with a passion for innovation and a strong background in new product development. This role is ideal for a driven professional who thrives in a fast-paced environment and enjoys solving complex technical challenges from concept through production. Key Responsibilities • Analyze technical data packages to develop design, validation, and production strategies., • Lead design reviews and drive Design for Manufacturing (DFM) initiatives., • Create and maintain Design Failure Mode and Effects Analyses (DFMEAs)., • Conduct trade studies and mentor junior engineers while developing robust mechanical solutions., • Develop and execute comprehensive Design Verification Plans (DVP), including test procedures, equipment calibration, fixture planning, and formal reporting., • Oversee prototype builds and support full-scale production launches., • Manage project timelines and deliverables as needed to meet key milestones.Required Qualifications, • Minimum 5 years of mechanical engineering experience, preferably in aerospace, automotive, or defense sectors., • Proven experience in designing and launching complex mechanical systems., • Proficiency in SolidWorks, including recent hands-on design work., • Strong understanding of GD&T and tolerance stack-up analysis., • Familiarity with engineering risk management tools such as DFMEA and PFMEA., • Experience with systems engineering and/or power electronics is a plus.Education, • Bachelor's degree in Mechanical Engineering required., • Advanced technical degree preferred., • DOD/Defense/Aerospace product design experience and training is desiredPreferred Skills & Knowledge, • Excellent communication and presentation skills for cross-functional collaboration., • Working knowledge of military standards and specifications (MIL, etc.) and the DoD technical review process., • Ability to perform Finite Element Analysis (FEA) and Computational Fluid Dynamics (CFD) using SolidWorks. Benefits * Competitive salary commensurate with experience. * Comprehensive benefits package including medical, dental, and vision coverage. * 401(k) retirement savings plan. * Paid time off and holidays. * Exciting and challenging work in a dynamic industry with opportunities for growth and advancement. • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. CyberCoders will consider for Employment in the City of Los Angeles qualified Applicants with Criminal Histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring (Ban the Box) Ordinance.This job was first posted by CyberCoders on 09/30/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description Job Duties/ Requirements • Needs to know how to program, setup, & operate a Mazak Dual Spindle Lathe with Live Tooling Inside our shop: • Haas machining Centers, Southwestern Mills and Lathes, • Haas Dual Spindle "Y" Axis-turning center, • Mazak Dual Spindle "Y" Axis turning center, • We use Solidworks, CAMWorks, Mazatrol and MasterCAM Hours: • M-F 7-4pm, • Time off / Paid Holidays Benefits include: • Health, • Dental, • Vision Compensation:

Job Description Job Duties/ Requirements • Needs to know how to program, setup, & operate a Haas Dual Spindle Lathe with Live Tooling Inside our shop: • Haas machining Centers, Southwestern Mills and Lathes, • Haas Dual Spindle "Y" Axis-turning center, • Mazak Dual Spindle "Y" Axis turning center, • We use Solidworks, CAMWorks, Mazatrol and MasterCAM Hours: • M-F 7-4pm, • Time off / Paid Holidays Benefits include: • Health, • Dental, • Vision Compensation:

About Us: Precision Tube & Catheter, Inc. (PT&C) is a high-tech enterprise dedicated to manufacturing advanced materials and components for interventional and implantable medical devices. We produce high-quality medical tubes used in various applications, including anesthesiology, respiratory equipment, and biopharmaceutical laboratory equipment. Our commitment to innovation and excellence drives us to exceed industry standards and client expectations. Position Summary: We are Precision Tube & Catheter, Inc. (PT&C), a leader in advanced medical tube manufacturing for interventional and implantable devices. We seek a hands-on Plastic Process Engineer to drive R&D innovation and optimize catheter production processes. This role will design tooling (SolidWorks), lead quality initiatives (NC/CAPA/SCAR), execute FDA validations (IQ/OQ/PQ), and leverage data analytics (Minitab/JMP) to enhance efficiency. The engineer will ensure compliance with GMP/ISO 13485 while collaborating cross-functionally to develop next-generation medical products. Key Responsibilities: • Monitor and analyze industry trends and market demands to identify new application opportunities; develop R&D plans aligned with company capabilities., • Lead or support the development and optimization of catheter materials and process designs; assess material compatibility with catheter manufacturing processes., • Design catheter components and associated tooling—including extrusion dies, injection molds, balloon molds, and fixtures—using SolidWorks., • Manage the non-conformance process by driving NC, CAPA, and SCAR activities, including root cause analysis, verification, validation, and implementation of corrective actions., • Develop and revise technical documentation such as SOPs, BOMs, Travelers, EFTs (Work Orders), MPIs, NCOs, DHRs, DHFs, FMEAs, Control Plans, and other quality or manufacturing documents., • Plan and execute validation activities (IQ/OQ/PQ) for processing equipment and medical device components in compliance with FDA regulations., • Perform process verification (OQ/PQ) for the production of extruded components and subassemblies., • Analyze data using Minitab or JMP to identify trends, troubleshoot issues, and implement cost improvement projects (CIP) for enhanced efficiency and savings., • Manage multiple concurrent projects and lead cross-functional, multi-site teams in the development and optimization of catheter processing and manufacturing., • Provide technical support for post-launch production processes and drive continuous improvement initiatives for new product introductions., • Define and maintain technical specifications for products, raw materials, and testing methodologies., • Stay informed on the latest advancements in polymers, medical device manufacturing, and process engineering; contribute to building the company’s R&D knowledge base., • Collaborate closely with R&D, Quality, Production, and Supply Chain teams to ensure material and process strategies support product development goals., • Ensure compliance with GMP and ISO 13485 standards throughout all activities. Qualifications: • Master’s degree or higher in Polymer Engineering, Materials Science, Chemical Engineering, or a closely related field., • A minimum of 2 years of relevant experience preferred; background in medical device materials or catheter manufacturing is highly desirable., • Strong proficiency in polymer processing, including compounding, blending, modification, and testing; working knowledge of plastics processing equipment is required, with hands-on experience preferred., • Familiarity with the characterization of polymers and blends used in balloon and tubing applications, including techniques such as DSC, SEM, TEM, Raman Spectroscopy, FTIR, XRF, XRD, X-Ray Tomography, GPC, WAXS, and rheometry., • A minor or academic background in Mechanical Engineering is preferred., • Bilingual proficiency in Mandarin and English is highly preferred. Working Conditions: Work is conducted in both office and manufacturing environments, requiring compliance with all applicable safety protocols and personal protective equipment (PPE) guidelines. The role may involve prolonged periods of standing and occasional lifting of materials up to 25 pounds, in accordance with applicable workplace safety regulations. Reasonable accommodations may be provided in accordance with the Americans with Disabilities Act (ADA). Benefits / Other: We believe our employees are our greatest resource. We offer a competitive salary and benefits package including 401(k) with employer contribution, paid holidays, and vacation. Insurance coverage includes medical, dental, vision, and prescription drugs. We are proud to be an equal-opportunity workplace. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. If you have a disability or special need that requires accommodation, please let us know. If applying for positions in the U.S., you must be eligible to work in the U.S. without needing an employer-sponsored visa (work permit). Why Join PT&C? At PT&C, you will be part of a dedicated team that values innovation, integrity, and collaboration. As an Extrusion Process/R&D Engineer, you will contribute to the development of cutting-edge medical products that enhance patient care globally. To Apply: Please submit your resume and cover letter to . We look forward to welcoming you to our team! Precision Tube & Catheter, Inc. is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Meacor Inc. - Irvine, CA (Onsite) Meacor is pioneering the future of valvular repair with a truly novel transcatheter device that leverages groundbreaking on-demand cryoadhesion technology. We're not just improving existing solutions; we're building something fundamentally new to address critical patient needs. Fresh off a successful Series A funding round, we have the momentum and resources to accelerate development and bring this innovative platform to the clinical field. Located in the vibrant medical device hub of Irvine, California, our team thrives in a dynamic environment supported by robust in-house prototyping capabilities. The Opportunity Meacor is seeking a Senior R&D Engineer to develop and validate the next-generation mitral and tricuspid valve repair devices. You will be a core part of our team, focused on the development of the implant and its integration with the delivery system. In this hands-on position you will: · Define and execute design verification strategies and develop test procedures to ensure product requirements are met. · Drive the design and development of critical implant sub-components, including anchors, sutures, and cinching mechanisms. · Translate physician and clinical feedback into actionable engineering requirements. · Collaborate closely with R&D, clinical, and manufacturing teams, supporting product transfer into a cleanroom manufacturing environment. This role requires a balance of technical design expertise, clinical insight, and practical problem solving, along with the ability to foster strong relationships across teams and with physicians. Key Responsibilities This role is a senior individual contributor position with opportunities to lead project-level initiatives. · This role is a senior individual contributor position with opportunities to lead project-level initiatives. · Define and execute design verification strategies, including test methods, custom fixtures, and equipment. · Develop and maintain product specifications to ensure compliance with engineering requirements and clinical use cases. · Interpret medical imaging and collaborate with physicians to translate clinical insights into actionable engineering solutions. · Partner with manufacturing to establish scalable, reproducible processes and support transfer into a cleanroom environment. · Contribute to preclinical, regulatory, and clinical trial activities by supporting testing, documentation, and submissions in accordance with ISO 5840, ISO 5910, FDA, and EU MDR requirements. · Prepare high-quality technical documentation and communicate results to internal teams and external stakeholders. · Establish internal standards and inspection methods for components and final devices to ensure consistent quality. Required Skills & Qualifications · Bachelor of Science in Engineering required; advanced degree preferred. · 7+ years of engineering experience, including direct work with structural heart implants; annuloplasty experience strongly preferred. · Proficiency in CAD software (SolidWorks preferred) for 3D design and technical drawings. · Deep understanding of cardiac anatomy, clinical workflows, and imaging modalities (echocardiography, fluoroscopy); prior cath lab or physician interface experience desirable. · Hands-on experience with design, prototyping, and collaboration on manufacturing methods (3D printing, machining/lathe, laser welding) within a QMS. · Experience supporting regulatory submissions (FDA IDE/PMA, EU MDR) and contributing to pre-clinical or early clinical trial activities is highly desirable. · Familiarity with testing standards such as ISO 5840 and ISO 5910. · Working knowledge of statistical techniques such as design of experiments (DOE), tolerance analysis, and verification testing. · Strong documentation, communication, and interpersonal skills, with the ability to collaborate effectively across technical teams and with clinicians. Why Join Meacor? · At Meacor, you will be part of a team at the forefront of medical innovation, where your work has a direct impact on patients’ lives. We foster a culture of creativity, collaboration, and technical excellence, giving you the resources and support to drive meaningful innovation. Our leadership team brings decades of collective experience in structural heart innovation, with a track record of successful startups, clinical trials, and product launches. · Contribute to the development of a first-in-class transcatheter device utilizing novel on-demand adhesion technology. · Reporting to a C-level executive, this is a hands-on senior individual contributor position with significant technical leadership. The role includes ownership of critical implant subsystems and the opportunity to mentor junior team members, driving projects from concept through verification and validation. · Work in a highly collaborative environment with state-of-the-art in-house prototyping and manufacturing capabilities for rapid iteration. · Engage directly with world-class clinicians to ensure our solutions address critical real-world patient needs. · Receive a competitive compensation package commensurate with experience, including a market-based salary ($130k-170k), equity participation, and comprehensive benefits (health, dental, vision, 401(k), and paid time off)

Job Overview: As an Senior CAD Designer, Your main responsibility is to take 2D design concepts into 3D CAD files. You will work with Industrial designers from Bell, Camelbak, Fox Racing & Giro, to bring concepts to reality. You will be responsible for organic A-side surfacing, while working closely & cross-functionally with the Engineering team to integrate engineering parameters, parts and components. Essential Functions of this Role: • Execute the 3D CAD design of complete products for all aspects inside and out, including but not exclusive to their function, aesthetics, usability, and comfort., • Create surfaces that respect the visual language of the brand, while contributing to their evolution., • Provide solutions to design issues through a clear understanding of user and market needs, • Deliver CAD files which supply development, engineering & manufacturing partners with information required to understand & and commercialize the intended product., • Working closely with product development, ensure that the margin and timeline targets of each product are achieved., • Actively engage in research of target market, industry competitors, and cultural trends., • Understand and design to the certification standards of each product category., • Assist product development in the commercialization of products through changes and tech packs. Competencies: • Proven CAD Expert in either, Rhino, Alias, Blender, Solidworks, Catia, or similar modeling software., • Excellent visual communication skills and demonstrated ability to create highly sculptural forms through products that have been brought to market or in personal projects, • A deeply enthusiastic attitude towards the Action Sports industries, • A self-starter who is able to execute based on company priorities and multiple project timelines Work Environment: • This job requires employees to be in the corporate offices in Irvine CA, 3 days per week. Travel: • Domestic and International travel to vendor visits, trade shows, sales events, etc. as needed. Required Education, Experience and Skills: • Exceptional surfacing skills in 3D CAD, • 3-5 years experience in Helmet Design., • A working knowledge of material properties, manufacturing processes and product development, • Proficiency in the Adobe Creative Suite software packages and Microsoft Office Minimum Education Required • Bachelors Years of Experience • 3-5 Pay Range: Annual Salary: $100,000.00 - $120,000.00 The actual annual salary offered to a candidate will be based on variables including experience, geographic location, education, and skills/achievements, and will be mutually agreed upon at the time of offer. We offer a highly competitive salary, comprehensive benefits including: medical and dental, vision, disability and life insurance, 401K, PTO, paid holidays, gear discounts and the ability to add value to an exciting mission! Our Postings are not intended for distribution to or use in any jurisdiction, country or territory where such distribution or use would violate local law or would subject us to any regulations in another jurisdiction, country or territory. We reserve the right to limit our Postings in any jurisdiction, country or territory. Equal Opportunity Employer Minorities/Females/Protected Veteran/Disabled

About Us: Precision Tube & Catheter, Inc. (PT&C) is a high-tech enterprise dedicated to the manufacturing of advanced materials and components，specializing in precision tubes and catheters for interventional and implantable medical devices. We produce high-quality medical tubes that meet stringent industry requirements for a diverse range of medical and pharmaceutical applications. Our commitment to innovation ensures that we exceed industry standards and support healthcare professionals in delivering effective patient care. Position Summary: We are seeking an experienced Manufacturing Process and Production Management professional. You will be a critical link between engineering, production operations, and quality assurance. You will not only understand the intricacies of precision tube and catheter manufacturing processes but also optimize them and lead teams to achieve key goals in safety, quality, delivery, and cost (SQDC). This role is vital to enhancing our competitiveness as a top-tier supplier in the medical device industry. Key Responsibilities: Process Management & Optimization: • Own process development, validation, and qualification (including Operational Qualification/Performance Qualification) for new catheter products and precision tube components from NPI through to full-scale production., • Analyze, optimize, and standardize existing manufacturing processes to solve technical issues, continuously improving efficiency, yield, and capacity., • Lead Process Failure Mode and Effects Analysis (PFMEA) and the implementation of Control Plans., • Manage and supervise the daily activities of production teams to ensure the production schedule is met on-time, in-full, and to specification., • Be accountable for production line performance metrics (KPIs) such as OEE, Output, and Scrap Rate through effective resource allocation and personnel scheduling., • Ensure the production floor strictly adheres to cGMP, ISO 13485, and relevant medical device regulations (e.g., 21 CFR Part 820) quality system requirements, maintaining an audit-ready state at all times., • Work closely with R&D to ensure the Design for Manufacturability (DFM) of new products6., • Collaborate with Quality Assurance (QA) and Quality Control (QC) departments to ensure products meet all specifications and standards., • Partner with Supply Chain and Procurement to optimize the use of raw materials and consumables. Essential: • Bachelor's degree or higher in an Engineering discipline (Mechanical, Polymer Science, Biomedical, Industrial Engineering, etc.)., • 5+ years of hands-on experience in the medical device industry, specifically in catheters or similar interventional disposables in a process, manufacturing engineering, or production management role., • Strong technical foundation in catheter manufacturing processes; expertise in extrusion, braiding, tubing processing, assembly, and packaging is required., • Demonstrated practical experience with Lean Manufacturing and Continuous Improvement principles (e.g., 5S, VSM, TPM; Six Sigma Green/Black Belt is a plus)., • In-depth knowledge of medical device quality management systems (ISO 13485, 21 CFR Part 820) and their application in production., • Excellent problem-solving, analytical, and project management skills., • Strong leadership, communication, and team management abilities., • Experience with technology transfer or New Product Introduction (NPI) is a plus1., • Strong background in catheter manufacturing process technology is a plus2., • Experience working in cross-regional and cross-cultural teams is advantageous., • Familiarity with design software such as SolidWorks or AutoCAD is a plus3. Benefits / Other: We believe our employees are our greatest resource. We offer a competitive salary and benefits package including 401(k) with employer contribution, paid holidays, and vacation. Insurance coverage includes medical, dental, vision, and prescription drugs.We are proud to be an equal-opportunity workplace. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. If you have a disability or special need that requires accommodation, please let us know. If applying for positions in the U.S., you must be eligible to work in the U.S. without needing an employer-sponsored visa (work permit). Why Join PT&C? • Be part of a high-impact startup developing critical medical components., • Work closely with founders and engineers to shape company processes and culture., • Opportunity for rapid professional growth and ownership in building quality systems from the ground up. To Apply: Please submit your resume and cover letter to . We look forward to reviewing your application! Precision Tube & Catheter, Inc. () is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Engineering Manager, CamelBak Irvine, CA Job Description As the Engineering Manager, you will be responsible for the development of industry-leading concepts from ideation through prototyping, initial development, and final development. This position works directly with the Director of R&D with close input from Merchandising, Sales, Brand Management, and Marketing, to drive our projects from conception to commercialization. You will develop and prove out technical, manufacturable, and consumer-valued product concepts and technical abilities that ultimately support future products that provide a benefit to the consumer, while striving to achieve or exceed standards beyond state of the art for return value to the company. This position reports to the Sr. Director of Hardgoods and is based out of Adventure Sports headquarters in Irvine, CA. As the Engineer Manager, you will have an opportunity to: • Lead product development and engineering for reservoirs, bottles, drinkware, and accessories., • Provide strategic direction for platform-level projects and 5-year product planning., • Present regular updates to cross-functional and executive teams., • Support CamelBak business Unit operations and communications., • Manage and mentor design and development engineers., • Attract, develop, and retain top talent through coaching and stretch assignments., • Direct internal and external resources for design, prototyping, tooling, and manufacturing., • Oversee internal workload and external partnerships to ensure timely project delivery., • Drive innovation and market leadership through cross-functional collaboration., • Brainstorm with Marketing and Design to generate creative concepts., • Evaluate product success based on innovation, function, brand relevance, quality, and margins., • Manage CAD and documentation processes for efficiency and accuracy., • Ensure compliance with safety standards and regulations (e.g., CE, CPSC)., • Manage product certifications and testing., • Deeply understand and apply safety standards in design evaluations., • Maintain continuous communication with overseas suppliers., • Visit manufacturing facilities to support sampling, commercialization, and process improvement., • Build strategic partnerships with key technology vendors., • Manage costing processes, including PLM entries and vendor quotations., • Oversee CAPEX tooling budgets and conduct NPV analyses., • Contribute to annual budgeting and operate within defined budgets., • Collaborate with Supply Chain, Customer Experience, and Brand Management to solve problems., • Coordinate graphics development for timely sample delivery., • Review and prioritize performance and styling goals in product design You have: • Education: 4-year degree in Mechanical Engineering (BSME) or equivalent work experience, • Experience: 5-10 years minimum consumer product development/engineering experience., • An enthusiastic and positive attitude with a passion towards MX, MTB and Action Sports. Must be very creative, forward thinking, an energy giver - not a taker., • CAD experience, preferably proficient in Solidworks., • Experience engineering injection molds, working with plastic parts and 3D modeling, • Knowledge of plastics, textiles, and embellishment techniques You might have: • Previous development/engineering experience in helmets or molded plastic protective sport products, • Prior experience working with overseas factories and vendors, • Experience engineering compression molds and parts Pay Range: Annual Salary: $135,000.00 - $150,000.00 The actual annual salary offered to a candidate will be based on variables including experience, geographic location, education, and skills/achievements, and will be mutually agreed upon at the time of offer. We offer a highly competitive salary, comprehensive benefits including: medical and dental, vision, disability and life insurance, 401K, PTO, paid holidays, gear discounts and the ability to add value to an exciting mission! Our Postings are not intended for distribution to or use in any jurisdiction, country or territory where such distribution or use would violate local law or would subject us to any regulations in another jurisdiction, country or territory. We reserve the right to limit our Postings in any jurisdiction, country or territory. Equal Opportunity Employer Minorities/Females/Protected Veteran/Disabled

Meacor Inc. - Irvine, CA (Onsite) Meacor is pioneering the future of valvular repair with a truly novel transcatheter device that leverages groundbreaking on-demand cryoadhesion technology. We're not just improving existing solutions; we're building something fundamentally new to address critical patient needs. Fresh off a successful Series A funding round, we have the momentum and resources to accelerate development and bring this innovative platform to the clinical field. Located in the vibrant medical device hub of Irvine, California, our team thrives in a dynamic environment supported by robust in-house prototyping capabilities. The Opportunity Meacor is seeking a Senior R&D Engineer to develop and validate the next-generation mitral and tricuspid valve repair devices. You will be a core part of our team, focused on the development of the implant and its integration with the delivery system. In this hands-on position you will: · Define and execute design verification strategies and develop test procedures to ensure product requirements are met. · Drive the design and development of critical implant sub-components, including anchors, sutures, and cinching mechanisms. · Translate physician and clinical feedback into actionable engineering requirements. · Collaborate closely with R&D, clinical, and manufacturing teams, supporting product transfer into a cleanroom manufacturing environment. This role requires a balance of technical design expertise, clinical insight, and practical problem solving, along with the ability to foster strong relationships across teams and with physicians. Key Responsibilities This role is a senior individual contributor position with opportunities to lead project-level initiatives. · This role is a senior individual contributor position with opportunities to lead project-level initiatives. · Define and execute design verification strategies, including test methods, custom fixtures, and equipment. · Develop and maintain product specifications to ensure compliance with engineering requirements and clinical use cases. · Interpret medical imaging and collaborate with physicians to translate clinical insights into actionable engineering solutions. · Partner with manufacturing to establish scalable, reproducible processes and support transfer into a cleanroom environment. · Contribute to preclinical, regulatory, and clinical trial activities by supporting testing, documentation, and submissions in accordance with ISO 5840, ISO 5910, FDA, and EU MDR requirements. · Prepare high-quality technical documentation and communicate results to internal teams and external stakeholders. · Establish internal standards and inspection methods for components and final devices to ensure consistent quality. Required Skills & Qualifications · Bachelor of Science in Engineering required; advanced degree preferred. · 7+ years of engineering experience, including direct work with structural heart implants; annuloplasty experience strongly preferred. · Proficiency in CAD software (SolidWorks preferred) for 3D design and technical drawings. · Deep understanding of cardiac anatomy, clinical workflows, and imaging modalities (echocardiography, fluoroscopy); prior cath lab or physician interface experience desirable. · Hands-on experience with design, prototyping, and collaboration on manufacturing methods (3D printing, machining/lathe, laser welding) within a QMS. · Experience supporting regulatory submissions (FDA IDE/PMA, EU MDR) and contributing to pre-clinical or early clinical trial activities is highly desirable. · Familiarity with testing standards such as ISO 5840 and ISO 5910. · Working knowledge of statistical techniques such as design of experiments (DOE), tolerance analysis, and verification testing. · Strong documentation, communication, and interpersonal skills, with the ability to collaborate effectively across technical teams and with clinicians. Why Join Meacor? · At Meacor, you will be part of a team at the forefront of medical innovation, where your work has a direct impact on patients’ lives. We foster a culture of creativity, collaboration, and technical excellence, giving you the resources and support to drive meaningful innovation. Our leadership team brings decades of collective experience in structural heart innovation, with a track record of successful startups, clinical trials, and product launches. · Contribute to the development of a first-in-class transcatheter device utilizing novel on-demand adhesion technology. · Reporting to a C-level executive, this is a hands-on senior individual contributor position with significant technical leadership. The role includes ownership of critical implant subsystems and the opportunity to mentor junior team members, driving projects from concept through verification and validation. · Work in a highly collaborative environment with state-of-the-art in-house prototyping and manufacturing capabilities for rapid iteration. · Engage directly with world-class clinicians to ensure our solutions address critical real-world patient needs. · Receive a competitive compensation package commensurate with experience, including a market-based salary ($130k-170k), equity participation, and comprehensive benefits (health, dental, vision, 401(k), and paid time off)

Fast Growing Manufacturing Company in the Metals Industry! This Jobot Job is hosted by: Caitlyn Hardy Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume. Salary: $27 - $32 per hour A bit about us: We are a metal manufacturing company based in Santa Clarita, CA. We are seeking a driven Planner/Programmer to help maintain the status execution of projects. Why join us? Excellent health, dental, and vision benefits Paid time off, sick pay, and holidays 401(k) plan with company match Opportunities for training and advancement Upward mobility • more! Job Details Requirements: • Associate’s Degree or equivalent from two years college or technical school, • 5 years of extensive experience with Metalsoft Fabriwin/AP 100, • 5 years’ experience in Precision Sheet Metal Fabrication., • Related experience and/or training will be considered in conjunction with the noted combination of education and experience herein., • Excellent knowledge of MS Excel & Solidworks a strong plus., • Spanish a plus, • Ability to communicate clearly and effectively both orally and in writing, • Experience in all aspects of Precision Sheet Metal & the ability to read & understand 2D drawings and BOM’S, • Shop experience, i.e. NC Punch, Laser, Brake Press, • Job/Work order planning experience, • Familiar with standard manufacturing concepts, practices, and manufacturing procedures. Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.

Job DescriptionPACIV is a global leader in industrial automation and process control solutions, serving clients in the life sciences, pharmaceutical, medical device, food & beverage, and utilities sectors, specializing in delivering compliant, high-performance automation systems tailored to regulated environments. We are looking for a Controls Engineer based in Aliso Viejo, CA to support the electrical and software components of machinery and tooling projects, from innovative R&D initiatives to full-scale production systems. This role involves collaborating with cross-functional teams and working closely with customers to understand technical requirements and contribute to the development of high-performance, integrated automation solutions. Job Responsibilities • Design, develop, and integrate custom automation software solutions, including machine vision, robotics, feedback systems, and data management tools., • Program and implement off-the-shelf components such as cameras, sensors, motors, and robots to create fully functional automated systems., • Collaborate with customers to define and refine project requirements, including functional specifications and user interface needs (e.g., HMIs, MES integration)., • Coordinate with interdisciplinary teams to ensure seamless mechanical and electrical integration across projects., • Support production teams during equipment debug, commissioning, and installation, ensuring smooth deployment and performance., • Manage project timelines and budgets, proactively communicating progress and roadblocks with Project Managers., • Oversee external suppliers and vendors, ensuring alignment with project goals and quality standards., • Provide on-site support for equipment deployment and service, with occasional travel required.Qualifications, • Bachelor’s or Master’s degree in engineering or related field, • Minimum up to 1 year of experience in controls design, PLC programming, and/or industrial automation, this can include course work, projects, and internship(s), • Practical, hands-on experience acquired through a relevant internship is required, • Skilled in AutoCAD or SolidWorks for wiring diagrams; familiar with HMI/GUI and PLC development environments., • Hands-on experience programming and tuning servomotors, stepper motors, and VFDs; field devices: sensors, actuators, and I/O signal processing., • Knowledge of integrating vision systems (e.g., Cognex, Keyence) and robotic platforms (e.g., Fanuc, ABB, Kuka, Mitsubishi, Epson)., • Knowledge of VB.NET, C, .NET, COM/ActiveX, & SDK/API implementation; understanding of communication protocols such as RS232, Ethernet/IP, & Modbus., • Proven ability to diagnose and resolve issues with automated equipment; able to read and interpret electrical, pneumatic, and mechanical schematics., • Comfortable working in 24/7 manufacturing environments., • Strong analytical and problem-solving skills, customer-focused mindset, and ability to thrive under pressure and uncertainty., • Collaborative team player with excellent interpersonal, verbal, and presentation skills; highly organized and proficient in Microsoft Office Suite, • Generous Paid Time Off - vacation, sick leave, and company-recognized holidays., • Healthcare Coverage - PACIV covers 90% of healthcare premium, • Health Savings Account (HSA) – Bi-monthly company contributions to manage out-of-pocket medical expenses. Powered by JazzHR FjTVwCD5jH

Braun US Pharmaceutical Manufacturing LLC Job Posting Location: Irvine, California, United States Functional Area: Quality Working Model: Onsite Days of Work: Wednesday, Tuesday, Thursday, Friday, Monday Shift: 5X8 Relocation Available: No Requisition ID: 3933 B.Other key product areas include nutri

Thank you for your interest in joining Solventum.Solventum is a new healthcare company with a long legacy of solving big challenges that improve lives and help healthcare professionals perform at their best.At Solventum, people are at the heart of every innovation we pursue.Guided by empathy, insigh

Braun US Pharmaceutical Manufacturing LLC.Job Posting Location: Irvine, California, United States.Days of Work: Wednesday, Tuesday, Thursday, Friday, Monday.Other key product areas include nutrition, pharmacy admixture and compounding, ostomy and wound care, and dialysis.The company is committed to

Thank you for your interest in joining Solventum.Solventum is a new healthcare company with a long legacy of solving big challenges that improve lives and help healthcare professionals perform at their best.At Solventum, people are at the heart of every innovation we pursue.Guided by empathy, insigh

Temp - Associate Product Manager.Boot Barn is where community comes first.We thrive on togetherness, collaboration, and belonging.We build each other up, listen intently, and implement out-of-the-box ideas.We celebrate new innovations, congratulate one another's achievements, and most importantly su

Design engineering in SolidWorks CAD.

Braun US Pharmaceutical Manufacturing LLC Job Posting Location: Irvine, California, United States Functional Area: Quality Working Model: Onsite Days of Work: Wednesday, Tuesday, Thursday, Friday, Monday Shift: 5X8 Relocation Available: No Requisition ID: 3933 B.Other key product areas include nutr

This is a full-time in-office role for a Design Civil Engineer.As a Design Civil Engineer at CDR, you will be responsible for civil engineering design, planning, and other related tasks.You will work closely with the project team to ensure successful project delivery and client satisfaction.This rol

Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, Hypersonics, and integrated defense systems.We believe that solving the industry's most complex and mission-critical challenges requires relentless determination and

To develop project opportunities for Pacific Rim Mechanical's Service Group by working with existing clients and by building new relationships.Primary focus on owner-direct repairs, replacements, retrofits, and tenant improvements.Identifying and developing business opportunities with new and existi

Korean beauty and lifestyle brands to consumers worldwide.If you’re a creative powerhouse with a passion for design, photography, and storytelling, this is your chance to shape the visual voice of a brand that’s making waves across the globe.Beyond static visuals, we want someone who can.DTC, re