Trabajos tooling en Houston, TexasCrear alertas

Job DescriptionDescription: Wiring Lead Spike Electric Pasadena, TX The Manufacturing Wiring Lead must have strong communication skills to effectively coordinate switchgear/control wiring work across the shop floor. This includes: • Lead wiring build activities for control panels and associated assemblies (terminals, relays, terminal blocks, meters/IO, control devices, etc.)., • Read and interpret:, • schematics & wiring diagrams, • panel layouts / one-lines, • BOMs and cable/harness lists, • work instructions, travelers, and label/routing standards, • Ensure correct:, • wire sizing, terminal selection, pinouts, • wire dress, routing, separation of power/control where required, • labeling/identification (wire markers, terminal IDs, harness tags), • termination quality (crimp technique, torque/spec adherence), • strain relief, bundling, and installation neatness (5S expectations), • Verify harnesses and control wiring prior to panel closure to prevent rework. Quality Checks & Documentation • Perform or oversee in-process inspections (as assigned) to ensure workmanship meets internal quality standards (and any IPC/industry specs if applicable)., • Identify defects (mis-wire, incorrect termination, missing labels, incorrect routing) and drive corrective actions:, • rework containment, • documentation updates, • feedback loop to improve the process, • Maintain accurate documentation and traceability (travelers, inspection records, test logs where required). Troubleshooting & Support • Troubleshoot wiring errors using diagrams, continuity verification, and panel documentation., • Support debug/rework activities efficiently while maintaining quality and safety. Team Leadership (Day Shift) • Assign tasks, balance workload across workbenches/cells, and track production progress vs. schedule., • Train and mentor assemblers on switchgear wiring practices, labeling, and documentation use., • Run shift handoffs and communication:, • priorities, • material shortages/shortages risk, • recurring defects, • engineering/process updates Materials & Flow Support • Coordinate kitting/staging needs:, • confirm correct parts/harnesses, • ensure labels/materials are available, • Flag material issues early to reduce downtime.Requirements:, • 2+ years’ experience in electro-mechanical manufacturing, specifically:, • control wiring, • switchgear/control panels, • wiring harness or cable assembly, • Strong ability to read wiring diagrams/schematics and follow work instructions., • Proficiency with common wiring/harness tools, such as:, • crimpers/crimp tooling, • wire strippers/cutting tools, • terminal block tools, • continuity/multimeter (or equivalent) for basic verification, • Demonstrated ability to maintain quality and reduce rework. Preferred Qualifications • Experience assembling switchgear/control cabinets (e.g., industrial power distribution, MCC/SCADA interface wiring, motor control panels, protective relays/IO)., • Familiarity with quality standards such as IPC or internal workmanship criteria., • Experience leading others (even informally) or acting as a go-to wiring resource., • Experience with ECO/engineering change updates and documentation control. Skills You’ll Use Daily • Control panel wiring & termination discipline, • Wiring harness builds accuracy (pinouts/labels/routing), • Diagram interpretation + traveler/work instruction compliance, • In-process verification and defect identification, • Coaching/leading a small team Work Conditions / Physical Requirements • Ability to stand and work at a bench for extended periods.

Job Description Location: SE Houston, TX 77075 Job Type: Temp to Hire Schedule: Full Time / M–F Weekends based on production needs Available shift: • Day Shift: 6am–6pm, • Night Shift: 6pm–6am Pay Range: $16.50/h Job Summary The Production Helper supports composite production by assisting experienced technicians with filament winding operations. This role is responsible for preparing tooling, selecting programs, performing basic machine setups, completing paperwork, and maintaining a clean and safe work environment. It requires consistent attention to detail, accurate measuring, and adherence to all production and safety procedures. The position is hands-on, fast-paced, and essential to maintaining workflow and quality standards across the winding department. Key Responsibilities • Load and unload filament winder machines., • Retrieve and verify tooling required for each job., • Select and confirm the correct filament winder program., • Assist with machine setup, cleaning, and stringing., • Complete required paperwork and system transactions., • Remove and replace temporary flooring at workstations., • Sweep and mop floors as needed., • Perform labor in/out using data collection systems., • Maintain 5S standards and overall workstation organization., • Move completed parts to staging areas., • Perform basic preventative maintenance on equipment., • Collaborate with other departments to support production priorities., • Operate overhead crane safely., • Follow all work procedures, safety guidelines, and company policies. Qualifications • High school diploma or GED., • No prior experience required., • Basic computer skills., • Ability to read and speak English., • Basic math skills., • Familiarity with measuring tools (calipers, OD micrometers, tape measure, ruler)., • Detail-oriented and able to follow instructions. Physical Requirements • Ability to lift up to 45 lbs., • Ability to stand 10–12 hours per shift., • Must wear required PPE., • Comfortable working in hot and cold conditions., • Ability to work around resins, composite materials, chemicals, solvents (acetone, release agents, cleaning supplies). #1644 \nCompany Description Agency 8 is a Recruiting and Staffing company that specializes in filling business-related positions. Agency 8 is positively impacting the lives of our employees, clients and communities. Founded in 2008, as a woman-owned historically underutilized business Texas HUB. We have grown tremendously in the last few years due to our innovation in recruiting technology and exceptional customer service. Learn more about us and our mission to improve the lives of our employees, clients and communities by visiting our social media pages. Agency 8 is a Recruiting and Staffing company that specializes in filling business-related positions. Agency 8 is positively impacting the lives of our employees, clients and communities. Founded in 2008, as a woman-owned historically underutilized business Texas HUB. We have grown tremendously in the last few years due to our innovation in recruiting technology and exceptional customer service. Learn more about us and our mission to improve the lives of our employees, clients and communities by visiting our social media pages.

Job Description Tool-Flo is seeking a dependable and detail-oriented Coating Production Helper to join our team. In this role you will support our coating department production team by handling/prepping carbide tools both before and after they have been coated in our PVD furnace. Key Responsibilities: • Prepare/assemble tools onto tooling holders using basic hand tools., • Retrieve, unpack, sort, and organize raw materials and hardware for preparation to be placed in coating rod racks. Qualifications and Skills: • Excellent attention to detail and a commitment to maintaining high-quality standards., • Ability to work independently and as part of a team in a fast-paced manufacturing setting., • Physical Stamina: Able to stand, walk, bend, and reach for long periods; ability to safely lift up to 15 lbs., • Experience with or comfort using basic hand tools (wrenches, screwdrivers, etc)., • High school diploma, GED, or equivalent experience., • Prior experience in a warehouse, manufacturing, or production environment is a plus, but not required. We provide training! Rate of Pay $16 - $19 based on knowledge and experience. \nCompany Description Tool-Flo Manufacturing Inc. is a producer of cutting tools for the oil/gas, automotive, aerospace and medical industries. We are a part of IMC Group, a Berkshire Hathaway owned company. Our network is one of the world’s largest companies for metalworking products and metal removal technology, supplying a dynamic comprehensive line of precision carbide metalworking tools. Tool-Flo Manufacturing Inc. is a producer of cutting tools for the oil/gas, automotive, aerospace and medical industries. We are a part of IMC Group, a Berkshire Hathaway owned company. Our network is one of the world’s largest companies for metalworking products and metal removal technology, supplying a dynamic comprehensive line of precision carbide metalworking tools.

Job Description Contract Flatbed Driver (1099) – Hotshot Delivery Rapid Fire Freight – Houston & Surrounding Areas Rapid Fire Freight is a new and growing hotshot delivery company serving Houston and the surrounding areas. We specialize in time-critical freight, manufacturing materials, oilfield supplies, tooling, equipment, pallets, pipe, and other commercial freight. We are currently seeking independent contract drivers (1099) with their own small or large flatbed truck/trailer to join our network. Equipment Requirements We are looking for drivers with: • Flatbed trucks or trailers ranging from 10 ft to 40 ft, • Small flatbeds, • Large flatbeds, • Proper load securement equipment, • Reliable, roadworthy vehicle and trailer Driver Requirements • Must be at least 21 years old, • Valid driver's license, • Smartphone with data service, • Minimum state-required liability insurance on your vehicle, • Ability to safely secure and transport freight, • Professional appearance and customer service skills PPE Requirements Many of our customers operate in industrial, manufacturing, construction, and oilfield environments. Drivers should have: • Hard Hat, • High-Visibility Safety Vest, • Steel-Toed Boots, • Other PPE as required by customer facilities TWIC Card A TWIC Card is a major plus, but not required to start. If you do not currently have a TWIC Card, that's okay. We can keep you moving on loads that do not require one while you work on obtaining it. Technology Drivers must be comfortable using a smartphone application. Our driver app will: • Dispatch loads directly to your phone, • Provide pickup and delivery locations, • Give turn-by-turn navigation assistance, • Require pickup and delivery photos, • Allow load status updates in real time Pay & Compensation Earn 70%–75% of every load you complete We keep it simple: • No hidden fees, • No dispatch fees, • No weekly lease payments, • No fuel card charges Only one deduction: • $30 per week for cargo insurance (provided by Rapid Fire Freight) Weekend Bonus Rapid Fire Freight operates 24/7, but weekend work is completely optional. Drivers who choose to work weekends receive: +25% Weekend Rate Increase Experience • Hotshot experience is preferred but not required, • Flatbed experience is a plus, • New drivers are welcome if they have the right equipment and work ethic Why Drive with Rapid Fire Freight? • Keep 70%–75% of load revenue, • Only one weekly deduction, • Flexible schedule, • No forced dispatch, • Work when you want, • Growing company with room to expand, • Consistent opportunities in manufacturing, industrial, oilfield, and commercial freight, • Company operates under a TXDOT number Apply Today If you own a 10–40 ft flatbed truck or trailer, have the equipment to haul freight safely, and are looking for a flexible opportunity with strong earning potential, we want to hear from you. Rapid Fire Freight Fast. Reliable. Delivered. \nCompany Description Rapid Fire Freight is a hotshot delivery company. Rapid Fire Freight is a hotshot delivery company.

Job Description Contract Hotshot Drivers Wanted Rapid Fire Freight Houston, TX & Surrounding Areas Rapid Fire Freight is a new and growing hotshot delivery company looking for dependable contract drivers to join our team. We service manufacturing facilities, machine shops, tooling companies, oilfield suppliers, construction companies, industrial customers, and more. We are looking for owner-operators with reliable trucks and trailers who want consistent work and the flexibility of being an independent contractor. Equipment We Are Hiring We are currently accepting: We have had numerous pickup trucks apply, we are now mainly looking for flatbeds. • Pickup Trucks (minimum vehicle requirement), • Small Flatbeds, • Large Flatbeds, • Mini Floats We do NOT accept: • Sedans, • SUVs, • Vans You do not need a brand-new truck. We simply require a vehicle that is reliable, properly maintained, and safe to operate. What We Haul Our drivers transport: • Pallets of various sizes and weights, • Manufacturing materials, • Tooling and machine parts, • Pipe and steel products, • Construction materials, • Industrial equipment, • Oilfield-related freight, • Emergency same-day freight Most deliveries are within Houston and surrounding areas, but opportunities are available throughout Texas. Driver Pay • Pickup Truck Drivers: 65%–70% of load revenue, • Flatbed & Mini Float Drivers: 70%-75% of load revenue, • Weekend On-Call Loads: Additional 24% premium per load Only One Weekly Deduction Rapid Fire Freight provides cargo insurance for all approved drivers. The only deduction is: • $30.00 per week for cargo insurance No hidden fees. No dispatch fees. No equipment rental fees. Driver Requirements Applicants must have: • Valid Driver's License, • Reliable Pickup Truck or Approved Trailer Setup, • Minimum Liability Insurance on Vehicle, • Smartphone with Internet Access, • Safe Driving Experience, • Ability to Follow Customer Requirements Required PPE Many of our customers operate industrial facilities and job sites. Drivers should have: • Hard Hat, • High Visibility Safety Vest, • Steel-Toed Boots TWIC Card Preferred A TWIC Card is highly preferred due to the number of industrial and port-related customers we service. Don't have one? We can provide a grace period for qualified drivers to obtain a TWIC Card after being hired. Drug Screening All drivers must pass an initial drug test for insurance and customer compliance purposes. Daily Operations Rapid Fire Freight operates primarily through our mobile dispatch system and phone communication. Drivers will be responsible for: • Receiving dispatches through the app and phone, • Taking photos at pickup locations, • Taking photos at delivery locations, • Obtaining the receiver's printed name, • Collecting digital signatures through the app, • Communicating professionally with dispatch and customers Work Schedule We operate 24 hours a day, 7 days a week. You choose your weekend availability. Every day, simply check in and let dispatch know you're available to work. We will do our best to start you with deliveries close to your home location whenever possible. No Office Required After your initial interview and onboarding process, there is no need to report to an office unless necessary You work directly from your vehicle and communicate through our dispatch system. Why Drive for Rapid Fire Freight? • Keep 65%–75% of load revenue, • Only one weekly deduction, • Flexible schedule, • No office reporting unless necessary, • Houston/surrounding areas-focused routes, • Statewide opportunities available, • Growing company, • Consistent demand from industrial, manufacturing, construction, and oilfield customers Join Rapid Fire Freight Today If you own a pickup truck, flatbed, or mini float and want the freedom of independent contract work while earning competitive pay, we'd like to hear from you. Apply today and help us build Houston's next great hotshot delivery company. www.RapidFireFreightHotshot.com \nCompany Description Rapid Fire Freight is a hotshot delivery company. Rapid Fire Freight is a hotshot delivery company.

Job DescriptionJob Description: Trystar is at the forefront of advancing power solutions, charged and driven by a committed, dynamic team, tackling complex challenges, and creating innovative solutions. We’re looking for motivated, driven, and talented individuals eager to be part of the future of power. Safety and integrity aren’t just buzzwords, they are the north star guiding us as we aspire to wow our customers every day. We’ve created power solutions that are not only durable and unique but are also the result of exciting teamwork from every corner of our organization. Individually and collectively, every team member at Trystar plays for each other and strives to deliver unmatched value and 100% accuracy to our customers every single day. Our cutting-edge headquarters is in Faribault, MN, a facility that is partially solar- and wind-powered by our own microgrid! You’ll find that we’re also pushing boundaries across the country at our additional facilities in Troy, MI; Houston, TX; Merrimack, NH; Burnsville, MN; and Murfreesboro, TN. Trystar’s team members are our most important asset, we are in search of a Brake Press Operator, for our Faribault, MN facility. This position plays a critical role in achieving our strategic objectives. Trystar’s Brake Press Operator position is an important part of Trystar’s plan to become the world’s foremost custom solution provider. Under the direction of the Production Supervisor, the Brake Press Operator will be responsible for operating press brake machines to bend, shape, and form sheet metal or other materials according to engineering drawings and specifications. They play a crucial role in the manufacturing process, ensuring precise and efficient production of components used in various industries. We are looking for people who believe in our guiding principles and values of: • Safety – We believe everyone should leave Trystar facilities in the same or better condition than when they arrived., • Integrity – We’re honest, transparent, and committed to doing what’s right., • Customer focus – We have relentless focus on our customers and their success., • Right with speed – We use good judgement, make thoughtful decisions quickly, and execute them with purpose and intensity., • Play for each other – We’re a team. We show up for each other and we know that through teamwork we achieve greatness., • Champion change – We know adaptation and improvement are requirements to survive and to thrive., • Enjoy the journey – We create an environment where our team feels appreciated and has fun along the way. In this role you will get to: • Machine Setup: Prepare and set up the press brake machine by loading the appropriate tooling, dies, and materials. Ensure the machine is correctly calibrated and aligned for accurate bending operations., • Material Handling: Position and align sheet metal or other materials on the press brake bed, ensuring proper placement for precise bending., • Bending Operations: Operate the press brake machine to bend or form materials as per engineering drawings and specifications. This includes selecting the appropriate tooling, adjusting machine settings, and monitoring the bending process., • Quality Control: Regularly inspect bent components to verify dimensional accuracy and quality, using measuring instruments such as calipers and gauges., • Tool Maintenance: Perform routine maintenance on press brake tooling, ensuring they are in good condition and replacing them when necessary., • Troubleshooting: Identify and resolve minor issues or deviations that may occur during the bending process, such as material inconsistencies or machine malfunctions., • Safety Compliance: Adhere to all safety guidelines and protocols while operating the press brake machine, ensuring compliance with company and industry safety regulations., • Production Monitoring: Monitor the bending process to maintain a steady workflow and promptly address any deviations or inefficiencies., • Documentation: Accurately record production data in Epicor, machine settings, and maintenance activities to maintain production records and assist in process improvement efforts. This also includes daily production reports, tally sheets, scrap reports, etc., • Collaboration: Coordinate with other team members, including supervisors, engineers, and quality control personnel, to ensure smooth production flow and meet production targets., • Read, comprehend, and execute processes and procedures according to the Standard Operating Procedures (SOP’s) which are necessary to properly operate the equipment and manufacture the product., • Read and interpret Solidworks engineering drawings as needed for accurate and safe brake operation., • Maintain and operate hand tools necessary to set-up, take apart and to operate the equipment., • Process Improvement: Continuously seek opportunities to improve bending processes, reduce cycle times, and enhance overall efficiency while maintaining high-quality standards., • Perform other projects and duties as assigned. Job Requirements: BASIC QUALIFICATIONS • 2 years’ experience in machine operation or mechanical ability and aptitude to understand how manufacturing equipment works together in a line to produce high quality products., • 2 years of experience working in a manufacturing environment or have general knowledge of metalworking, bending and tooling., • Ability to lift and carry up to 50 pounds on a regular basis., • Must be able to read, write and comprehend plant directives written in English., • Proficiency in reading and interpreting engineering drawings and specifications. ADDITIONAL QUALIFICATIONS • High school diploma, • Technical secondary education is preferred., • Previous Brake Press Operation is preferred., • Perform simple mathematics to comprehend and interpret process sheets, SOP manuals, tally sheets, etc. and to keep accurate account of materials used during manufacturing process including scrap amounts., • Frequent lifting, standing, bending & reaching required, • Able to pass a pre-employment physical and drug test, • Must adhere to all the PPE requirements to perform the job safely, this includes but is not limited to, Eye, Hand, Feet, and Hearing protection

Job Description The EDM Machine Operator is responsible for setting up, programming, and operating Electrical Discharge Machining (EDM) equipment to produce precision components that meet engineering specifications and quality standards. The role requires proficiency in RAM EDM, Wire EDM, and EDM Drilling operations, along with the ability to safely handle parts using overhead cranes, perform inspections, maintain equipment cleanliness, and support continuous improvement initiatives. The ideal candidate demonstrates flexibility and a willingness to cross-train on similar manufacturing equipment and processes. Experience 5 years of EDM machining experience preferred. Experience with: Wire EDM RAM EDM EDM Drill Machines Ability to perform machine setup and programming functions. Ability to read and interpret engineering drawings and specifications. Knowledge of precision measurement and machining practices. Preferred Qualifications Experience with machine brands like Charmilles, Mitsubishi, or similar equipment. Overhead crane experience. Forklift experience/certification. Additional CNC or machining experience. Resumes should specify: Wire EDM experience. RAM EDM experience. EDM drilling experience. Programming and setup experience. Types of materials and parts worked on. Additional machining skills and equipment operated. Key Responsibilities Set up, program, and operate RAM EDM machines (Charmilles, Mitsubishi, or similar equipment). Set up and operate Wire Cut EDM machines to achieve required dimensional and geometric tolerances. Set up and operate EDM Drill machines for precision hole drilling applications. Interpret engineering drawings, specifications, process sheets, and work instructions. Create, edit, and optimize EDM programs to meet machining requirements and improve productivity. Select and install electrodes, wire, tooling, fixtures, and workholding devices as required. Perform machine offsets and process adjustments to maintain dimensional accuracy and surface finish requirements. Safely load and unload components using overhead cranes and approved rigging techniques. Inspect lifting equipment prior to use and follow all crane safety procedures. Conduct in-process and final inspections using measuring instruments and gauges to verify conformance to specifications. Identify and resolve basic machining, programming, and setup issues. Maintain production records, inspection reports, and job documentation. Perform routine machine cleaning and operator-level preventive maintenance activities. Maintain workstation organization and housekeeping in accordance with 5S standards. Support continuous improvement initiatives and adherence to safety and quality standards.

Job DescriptionDescription: The Slitter Operator is responsible for operating and maintaining the slitting line to produce high-quality slit steel coils in accordance with production requirements and quality standards. This role includes machine setup, equipment adjustments, material handling, inspection of finished products, and reporting production data. The Slitter Operator works closely with team members, supervisors, and maintenance personnel to ensure safe, efficient, and continuous operation of the slitting line. Key Responsibilities: • Perform all operational duties required to produce quality material on the slitting line, including machine setup, loading, operation, and offloading of material., • Set up knives and tooling, changeover slitter arms, and adjust controls required to operate the slitting line efficiently., • Operate material handling equipment to move steel coils and finished materials throughout the production process., • Observe incoming and finished materials for defects and report equipment malfunctions or quality concerns to supervision., • Band, bundle, tack weld, tag, and identify slit coils according to production requirements and instructions, • Maintain production standards while ensuring product quality and minimizing downtime., • Assist with maintaining tooling through proper handling, cleaning, and storage practices., • Complete daily production, time, and material usage reports accurately., • Work collaboratively with other Slitter Operators, Supervisors, and Maintenance personnel to meet production goals., • Maintain a clean, organized, and safe work environment at all times., • Follow all company safety policies, procedures, and safe work practices., • Perform other duties as assigned by the SupervisorRequirements: Qualifications and Requirements: • High school diploma or GED required, • 1 to 3 years of industrial or manufacturing experience preferred, • 3 to 5 years of steel industry or slitting line experience preferred, • Experience making mechanical adjustments to industrial equipment, • Ability to read and interpret gauges, dials, and measuring devices, • Strong attention to detail and commitment to quality, • Strong verbal and written communication skills, • Ability to work in varying temperatures and industrial conditions, • Ability to stand and walk for extended periods and lift up to 50 pounds frequently This job description is intended to describe the general nature and level of work performed and is not intended to be a complete list of all duties and responsibilities. IKG is committed to equal employment opportunity. We recruit, employ, train, compensate, and promote without regard to race, religion, color, national origin, age, sex, disability, protected veteran status, sexual orientation, gender identity, or any other basis protected by applicable federal, state, or local law

Job Description Your Day-to-Day Impact You’ll play a vital role in our Production team by: • Adhere to all safety policies, procedures, and wear required PPE and uniform., • Apply thread lubricant or storage compound to threads as needed., • Install thread protectors to prevent damage to finished threads., • Operate saws to cut off pipe ends or rejected threads., • Operate swaging equipment as directed., • Manually drift pipe as required., • Perform shop cleanup and abrasive blasting of threaded ends., • Assist machine operators with heavy tooling during machine setup., • Assist in phosphate coating and product preparation., • Ensure quality control and follow all work instructions, specifications, and company rules., • Perform any other duties as assigned by the Lead, Supervisor, or Manager What You Bring We’re looking for candidates who are sharp, safety-focused, and ready to roll up their sleeves: • High School Diploma or equivalent, preferred., • 0-2 years of experience as a Production Operator., • Ability to operate a forklift and overhead crane once trained., • Must be fluent in English, with the ability to read, write, and communicate effectively., • Should be able to lift and move objects weighing up to 50 lbs. and push/pull 75 lbs., • Ability to understand and execute instructions well. What You’ll Gain • Get paid for what you know - and earn more as you learn more., • Opportunities to work on cutting-edge equipment, • A culture that values your input and celebrates improvement, • Real growth potential in a stable, essential industry And Benefits that Include: • Medical, Dental, and Vision Coverage, • Company-Paid Life Insurance & Short/Long-Term Disability, • Profit Sharing: Up to 4%, • 401(k): Company match 4.5% with no vesting period, • Paid Parental Leave: For birthing and non-birthing parents, including adoptions, • Paid Holidays: 10 days, plus 1 personal floating holiday, • Paid Vacation Time, • Discretionary Performance-Based Bonus Program, • Tuition Reimbursement Safety isn’t negotiable, it’s who we are. Every spark, every shift, and every decision is guided by a commitment that goes well beyond compliance. We don’t cut corners; we set the standard. That means clear expectations, continuous training, and shared accountability at every level. Protecting our people is more than a priority, it’s a promise we make to every colleague, every day.

Job DescriptionPosition Summary The Machine Operator may operate a variety of machines in the shop including angle line machine, beveller, saw, shear, oxy or plasma burner, laser cutter, rolling machine, flattening press or machine, shot blaster, manual and robotic welders, press brake, machining center or lathe, and tube or custom laser. Duties and Responsibilities • Commitment to workplace safety., • Set-up and operate machines including adjustment and/or replacement of expendable tooling, guides, jigs and fixtures., • Operate an angle line machine, beveller, saw, shear, oxy or plasma burner, laser cutter, rolling machine, flattening press or machine, shot blaster, manual and robotic welders, press brake, machining center or lathe, and tube or custom laser., • Support the safety and quality programs by following all accompanying rules and established processes., • Other duties as assigned.Skills and Qualifications, • Ability to operate forklift and cranes., • Ability to read and interpret forming blueprints., • Ability to understand customer tolerances, • Ability to use a variety of hand tools such as hammer, pliers, screwdriver, wrench, drill, grinder and bander., • Ability to use measuring tools such as tape measure, square and caliper and micrometer., • Ability to convert fractions to decimals and vice versa., • Ability to convert metric to English., • Provide high quality work to all internal and external customers as related to the output of their position., • Capable of setting up and operating one or more processing machines., • Speak, write and comprehend conversational English., • Strong attention to detail., • High School Diploma or equivalent (preferred). Physical Requirements Ability to lift 20-50lbs. repetitively throughout the course of a shift Ability to bend, sit, stand, twist, and stoop for long periods of time Ability to walk 2-5 miles throughout the course of a shift Have good vision 20/30 with corrective lenses Ability to maintain coordination of hand and finger movements to grasp and manipulate objects of precision Subject to environmental conditions that occur indoors and outdoors which includes but is not limited to exposure to changing temperatures, loud noises and vibration from use of equipment and the following: • Hazards: Variety of physical conditions, such as proximity to moving mechanical parts, electrical parts, electrical current, exposure to high heat or exposure to chemicals., • Atmospheric conditions: One or more of the following conditions that affect the respiratory system or the skin fumes, odor, dusts, mists, gases, or poor ventilation., • Oils: There is air and/or skin exposure to oils and other cutting fluids. You should be proficient in: • Blueprint Reading Machines & technologies you'll use: • Press Brake (Accurpress)

Job Description Roll Forming Machine Operator Position Summary The Roll Forming Machine Operator is responsible for setting up, operating, and monitoring roll forming equipment to produce quality metal components according to specifications and production schedules. This position ensures safe machine operation, maintains product quality standards, and supports efficient manufacturing processes. Essential Job Responsibilities • Operate roll forming machinery safely and efficiently to meet production goals., • Set up machines for production runs, including tooling changes and material loading., • Monitor machine performance and make adjustments as necessary to maintain product quality and dimensional accuracy., • Inspect finished products to ensure compliance with specifications, quality standards, and customer requirements., • Complete production reports and record operational data accurately., • Perform routine machine maintenance, cleaning, and lubrication., • Troubleshoot equipment issues and notify maintenance personnel when repairs are needed., • Safely operate forklifts, overhead cranes, or other material-handling equipment as required., • Maintain a clean and organized work area in accordance with company safety standards., • Follow all company safety policies, procedures, and OSHA regulations., • Assist with inventory management and material tracking., • Work collaboratively with supervisors, quality personnel, and other production team members to improve efficiency and productivity. Qualifications • Previous manufacturing or machine operating experience preferred., • Experience with roll forming equipment is a plus., • Ability to read and interpret production orders, measurements, and blueprints., • Strong attention to detail and commitment to quality., • Basic mechanical aptitude and troubleshooting skills., • Ability to use measuring tools such as tape measures., • Capable of lifting up to 50 pounds and standing for extended periods., • Ability to work independently and as part of a team. Physical Requirements • Frequent standing, walking, bending, and reaching., • Ability to lift, push, and pull materials throughout the shift., • Ability to work in a manufacturing environment with exposure to noise, moving machinery, and varying temperatures. Success Measures • Meets or exceeds production targets., • Maintains quality standards with minimal defects or scrap., • Demonstrates safe work practices and adherence to company policies., • Supports continuous improvement initiatives and teamwork within the department.

Job DescriptionBenefits: • Other Group Voluntary Insurance Coverage Options, • Critical Care Insurance, • Group Life Insurance, • Company parties, • Competitive salary, • Dental insurance, • Employee discounts, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development, • Vision insurance, • Wellness resources Job description: Founded in 1990, FERPA Precision Machine, Inc. is a family-owned business with 35+ years of precision manufacturing expertise. Known for our high-performance plastic seals and oilfield components, we’ve expanded into small- to medium-sized precision metal parts with a growing focus on aerospace. We blend advanced technology with a client-focused, quality-driven approach, and value each team member’s contribution in continuing our tradition of excellence. Learn more about FERPA here: https://ferpa-pmi.com/about-us Summary/Objective We’re hiring a CNC Mill Machinist! In this position, you’ll be responsible for machining precision components that support our high-quality machining services. You’ll be setting up CNC mills and producing components that meet demanding specifications. Our clean, air-conditioned facility is equipped with modern machinery and software to support your success. At FERPA, we value craftsmanship, innovation, and professional development—and we’re looking for someone who does too. We’re in the process of moving into a new facility next year and plan to invest in additional CNC mills to meet growing demand! Responsibilities • Set up and operate CNC milling machines, ensuring precise material loading and accurate configuration for optimal machining performance., • Configure tool registers, apply offsets/compensations, and utilize conditional switches as required by job specifications., • Interpret and apply information from blueprints, technical drawings, and schematics to guide machining operations., • Perform detailed inspections using micrometers, calipers, gauges, and other precision measuring instruments to verify part conformity., • Confirm machine settings and verify compliance with established quality standards., • Select appropriate cutting tools, machine settings, and workholding fixtures tailored to specific production requirements., • Conduct routine maintenance and ensure machines are properly calibrated and in safe working condition., • Monitor active operations, observe drilling, grooving, and cutting, and make real-time adjustments to ensure efficiency and quality., • Troubleshoot and resolve mechanical or process issues related to the CNC milling machines., • Adhere strictly to all safety procedures and guidelines when operating equipment and handling materials., • Collaborate effectively with cross-functional teams to achieve production deadlines and quality objectives., • Maintain a clean, organized, and efficient work area in accordance with 5S or lean manufacturing principles., • Support additional tasks and job-related duties as assigned to meet business and production needs.Job Requirements/ Qualifications, • High school diploma or equivalent. Technical or vocational training in machining or a related field is preferred., • Minimum of 5 years of hands-on experience operating milling machines., • Familiar with editing Mastercam files for 3-axis and 4-axis CNC milling., • Strong understanding of CNC G-code and M-code programming., • This position requires U.S. Person status as defined by applicable law for authorized access to data controlled under the International Traffic in Arms Regulations (ITAR). A U.S. Person includes U.S. Citizens, U.S. Nationals, lawful permanent residents, and workers granted refugee or asylum status in the United States.Skills and Competencies, • Skilled in reading and interpreting blueprints, technical drawings, and machining specifications., • Strong knowledge of metal properties, tooling selection, and cutting parameters., • Proficient in the use of precision measuring instruments, including micrometers, calipers, indicators, and gauges., • Experienced in interpreting tolerances, achieving precise surface finishes, and meeting stringent quality standards., • Proficient with FANUC-controlled CNC machines and G-code programming., • Hands-on experience in machining and setup operations, including part prove-outs and troubleshooting., • Proven ability to maintain tight tolerances and comply with SAE aerospace standards., • Experienced in machining a wide range of materials, including plastics, stainless steels (300 Series, Nitronic 60), PH stainless steels (15-5, 17-4), aluminum bronze, MP35N, and Inconel., • Able to work independently, identify and resolve issues, and sustain efficient workflow., • Strong understanding of shop math, mechanical principles, and CNC milling fundamentals., • Highly detail-oriented with excellent time management and organizational skills.Additional Preferred Qualifications, • AS9100 and ISO 9001 experience or familiarity is a plus., • Preferred experience in a job shop environment.

Job Description Are you passionate about working with your hands and transforming raw steel into precision-cut parts? Do you take pride in doing things right the first time? At Trinity Products, we’re not just cutting steel—we’re shaping the backbone of America's infrastructure. And the best part? You’ll be part of a 100% employee-owned company where every shift you work is an investment in your own future. This is a 2nd Shift position (Monday - Friday, 2:00pm - 10:30pm) at our Houston location. As a Burn Table Operator, you'll operate advance machinery to cut steel plates according to detailed specifications. You’ll determine cutting sequences, select tooling, and ensure every part meets our high standards for quality, accuracy, and safety. What You'll Do: • Select and design appropriate cutting tools as needed for each job., • Test program to ensure machining operations comply with print and specifications., • Ensure proper CNC program details are set-up to run the assigned work order., • Interpret blueprints, drawings, and cut sheets to ensure accurate material cutting., • Maintain high standards of quality control and visual inspection during and after cutting., • Keep your work area organized and clean, contributing to a safe, productive workspace., • Follow all safety guidelines and company procedures., • Perform additional tasks and duties as assigned by your supervisor. Requirements: • High school diploma or equivalent required., • 2–3 years of experience operating CNC machinery, with Oxy, Plasma or Laser experience preferred., • Overhead crane/forklift experience preferred., • Strong mechanical aptitude and experience working in a fast-paced, industrial environment., • Excellent attention to detail—you take pride in precision., • Ability to read tape measurements down to 1/16th - high importance., • Ability to read and interpret blueprints, work instructions, safety rules, and production schedules., • Strong problem-solving skills and the ability to adapt to new or changing variables., • Comfortable working on your feet for extended periods, and regularly lifting 25–50 lbs., • Capable of kneeling, bending, and operating hand and power tools throughout the shift., • A strong team player who communicates clearly and works well across departments., • Previous experience in heavy industry or structural steel fabrication is a plus. Founded in January 1979 by Robert Griggs and a team of visionary partners, Trinity Products began as a bold dream fueled by hard work, innovation, and an unwavering entrepreneurial spirit. From those humble beginnings, we’ve grown into a national leader in steel and steel fabrication—thanks to our commitment to continuous improvement and delivering exceptional value to our customers. Today, Trinity is proud to be a 100% Employee-Owned Company, with nearly 280 employee-owners who are directly invested in our success. With six strategic locations across the country and a broad, flexible product line, we proudly serve a wide range of industries and markets nationwide. At Trinity, we believe our strength lies in our people. Our employee-owners are not just workers—they’re stakeholders, innovators, and the driving force behind our continued growth. If you’re looking to join a company where your contributions truly matter and your voice can shape the future, Trinity Products is the place for you. Why You'll Love Working Here: • Employee-Owned – Your hard work builds your future. As an employee-owner, you're not just part of the team—you have a stake in the company's success., • Shift Premium Pay – Get rewarded for working 2nd shift with competitive shift differentials., • Outstanding Benefits Package – Enjoy comprehensive benefits including health, dental, vision, 401(k) with match, paid time off, and more—we invest in your well-being on and off the job., • Modern Facility & Equipment – Work in a well-maintained environment with top-tier tools and machines., • Career Growth Opportunities – We promote from within and offer continuous learning and development., • Supportive Team Culture – You’re not just a number here—you're part of a tight-knit crew that values teamwork, safety, and craftsmanship.

Job Description Machine Shop Operator - 2nd Shift Houston, Texas Full-Time Role Summary/Purpose Plan and perform the set up and operation of an assigned CNC numerical controlled lathe to machine component parts in process of ferrous, non-ferrous and alloy metals. Work involves the assignment to either the NC/CNC Lathes, proving out computer programs in collaboration with Programmer, and following prescribed program, tooling, set up and offset specifications. Essential Responsibilities • Must be able to work from detail part drawings, work orders, set ups, tooling, process and operation instruction sheets, and digital program., • Set up and operate 2-axis lathes and operate 4-axis lathes on a wide range of products, receiving assistance from programmer or supervisor if needed., • Review parts program file and select set tools in tool holder, turret, or cross slide location., • Operate control console to enter program data, back off tool offsets, and check out with dry run. Edit the program as required., • Unload bar stock from delivery truck with overhead crane and place in intermediate storage area., • Load part, sequence each tool, enter offset adjustment data, and continue trails (as required) to produce piece meeting drawing specifications., • Inspect parts periodically in accordance with established frequency, for conformance to quality and engineering specifications, making offsets (as required) to compensate for tool wear., • Indicate work to detect and eliminate run out., • Tolerances are very strict and involve a demand for squareness, concentricity, and parallelism., • Detect and report faulty operations, defective material, and equipment, drawing discrepancies, and other unusual conditions to the proper supervisor., • Maintain workplace in neat and orderly condition. Qualifications/Requirements • GED or High School Diploma, • 1 - 2 years Manufacturing Experience Dresser is an Equal Opportunity Employer. We respect and seek to empower each individual and support the diverse cultures, perspectives, skills, and experiences within our workforce. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status, or other characteristics protected by law.

Job Description 1 Resource Group is seeking an experienced Manual Machinist with expertise in HBM Line Bore operations to join our team. The ideal candidate will be responsible for precise manual machining tasks with a focus on horizontal boring mills (HBM) and line boring equipment, ensuring component parts meet exact specifications and quality standards. Key Responsibilities: • Operate and set up horizontal boring mills and line boring machines for maintenance, repair, and fabrication of machinery components., • Interpret blueprints, technical drawings, and specifications related to HBM and line bore machining., • Perform precise machining operations including drilling, boring, milling, and reaming as required., • Use precision measuring instruments to check dimensions and tolerances throughout the machining process., • Maintain equipment, troubleshoot mechanical issues, and perform routine maintenance., • Collaborate closely with engineering and maintenance teams to meet project timelines and quality expectations., • Adhere to all safety and quality procedures within the shop environment. Requirements Qualifications: • High school diploma or equivalent with relevant technical training preferred., • Minimum of 6 years of manual machining experience specifically with horizontal boring mills (HBM) and line bore operations., • Strong ability to read and interpret blueprints, blueprints, and technical drawings., • Proficient with precision measuring tools such as micrometers, bore gauges, and dial indicators., • Understanding of machine setup, tooling selection, and machining parameters for HBM and line boring machines., • Good mechanical aptitude and troubleshooting skills., • Strong attention to detail and quality focus., • Ability to work independently and as part of a team., • Familiarity with safety standards and practices in a machining environment. Benefits Medical, Dental, Vision

Job DescriptionPOSITION SUMMARY The Threader is responsible for safely setting up and operating threading equipment to produce threaded steel products according to sales orders, routers, drawings, and established quality requirements. The position performs machine setup, material verification, threading operations, dimensional inspections, material handling, production documentation, and routine equipment care while maintaining safety, quality, and production standards. ESSENTIAL DUTIES & RESPONSIBILITIES • Inspect threading machines, guards, emergency stops, tooling, and equipment before use., • Review sales orders, routers, drawings, and work instructions to determine job requirements., • Verify material heat number, diameter, type, and grade before processing., • Set up, adjust, and safely operate threading machines according to established procedures., • Properly position and secure material before beginning threading operations., • Perform first-piece and required in-process inspections to verify thread dimensions and tolerances., • Use calibrated measuring equipment, including calipers, micrometers, pitch micrometers, tape measures, and applicable gauges., • Identify defective or nonconforming threads and report quality or machine issues to the Supervisor or Quality Control., • Accurately complete Routers, inspection records, SPC documentation, and other required production records., • Maintain proper material identification and traceability throughout the threading process., • Safely stage and move steel materials using approved material-handling methods and equipment., • Operate overhead cranes and rigging equipment only when properly trained, certified, and authorized., • Maintain threading machines, tools, and work areas in a clean and orderly condition., • Perform basic equipment care and cleaning within the employee's level of training and authorization., • Immediately report equipment deficiencies, unsafe conditions, incidents, injuries, and near misses.SAFETY RESPONSIBILITIES, • Follow all company safety policies, procedures, Job Hazard Analyses, and safe work practices., • Wear all required Personal Protective Equipment (PPE)., • Follow machine guarding and Lockout/Tagout requirements., • Never touch or adjust material or machine components while they are rotating or in motion., • Keep loose clothing, jewelry, gloves, and other items away from rotating equipment and material where entanglement hazards exist., • Use emergency stops when necessary and wait until equipment has completely stopped before making adjustments., • Operate only equipment for which the employee has been properly trained and authorized.QUALIFICATIONS & TRAINING, • Complete required new-hire, HSE, and Threader-specific training., • Demonstrate the ability to safely set up and operate threading equipment., • Ability to read and understand work orders, Routers, drawings, and production instructions., • Ability to use applicable measuring and inspection equipment., • Basic understanding of thread dimensions, specifications, and tolerances., • Ability to identify defective or nonconforming products., • Complete supervised hands-on training and demonstrate competency before independent machine operation., • Maintain required crane or equipment certifications when applicable.PERFORMANCE EXPECTATIONS The Threader is expected to consistently demonstrate safe work practices, produce material within required specifications, complete accurate inspections and documentation, maintain acceptable productivity, properly care for equipment, maintain good housekeeping, and comply with company policies and procedures. PHYSICAL & WORK ENVIRONMENT Work is performed in an industrial steel manufacturing environment around powered machinery, rotating equipment, steel materials, cranes, tools, and material-handling equipment. The position may require prolonged standing, bending, reaching, handling materials and tools, and working in areas with industrial noise and moving equipment. Night Shift

Job Description Uni-Form Components is looking for a dependable, safety-focused Press Helper to join our manufacturing team. This position works alongside Press Operators to support the setup, pressing, and forming of steel heads using industrial presses, furnaces, and die sets. This is a hands-on position with an opportunity to learn the Press operation and develop additional manufacturing skills. What You'll Do • Assist Press Operators with press setup and preparation., • Read and follow job cards, prints, and production instructions., • Help gather, stage, and position the correct dies, tooling, and materials for each job., • Assist with loading and positioning material for the pressing and forming process., • Support furnace operations and material movement as directed., • Measure materials and help verify specifications throughout the process., • Safely operate forklifts and overhead cranes as trained and authorized., • Use grinders, hammers, wrenches, pry bars, and other hand tools., • Inspect equipment and communicate any safety or equipment concerns., • Maintain a clean and organized work area., • Follow all company safety procedures and required PPE standards., • Perform other duties as needed to support Press operations.What We're Looking For, • Manufacturing or industrial experience preferred., • Experience in metal forming, heavy manufacturing, or working around industrial equipment is a plus., • Ability to read and understand basic job cards, measurements, prints, and drawings., • Forklift and overhead crane experience preferred., • Basic reading, writing, and math skills., • Strong attention to safety and quality., • Reliable and punctual., • Willingness to learn and take direction from experienced Press Operators., • Ability to work independently when needed and as part of a team., • High school diploma or equivalent preferred.Physical & Work Environment, • Ability to work around industrial presses, furnaces, and high temperatures., • Exposure to noise, dust, and varying temperatures., • Ability to stand, walk, bend, stoop, kneel, and reach for extended periods., • Ability to lift and carry up to 50 lbs., with lifting equipment available for heavier materials., • Ability to wear required PPE., • Willingness to work overtime as production needs require.Why Join Uni-Form Components? The Press Helper position is an opportunity to gain hands-on experience with specialized metal-forming operations while learning from experienced Press Operators. Employees who demonstrate the skills, safety awareness, and ability to operate independently may have opportunities to continue developing within the Press department. Apply today to build your future with Uni-Form Components. Powered by JazzHR lOm3pWHT9G

Job DescriptionCNC Mill Machinist Pay: $22 - $28 Location: Houston, TX Temp-to-hire Openwork, formerly Meador Staffing, is seeking an experienced CNC Mill Machinist who can read a print, set up a VMC, prove out the first piece, and consistently produce quality parts with minimal supervision. Work includes gage bodies, cover plates, valve components, and flanged parts in carbon steel, stainless steel, and specialty alloys. Precision is critical because products are used in pressure-containing applications. Responsbilities • Set up and run 3-axis vertical machining centers, including 4th-axis work as needed, • Read blueprints, GD&T callouts, and routers to plan jobs before machining, • Select and load tooling, set work and tool offsets, and build fixtures or soft jaws, • Run first-article parts, make adjustments, and establish proven setups, • Change over jobs efficiently in a high-mix, low-volume shop, • Edit G-code at the control to adjust feeds, speeds, and toolpaths, • Write simple programs at the machine for one-off and repair parts, • Work with CAM programs and provide feedback when programs or prints require changes, • Inspect parts using micrometers, calipers, bore gages, height gages, thread gages, and indicators, • Hold tolerances to 0.001 in. when specified, • Complete first-article, in-process, and final inspection records, • Identify and tag nonconforming material and assist with root-cause analysis, • Follow ISO 9001 quality procedures and material traceability requirements, • Perform daily machine checks, coolant maintenance, chip removal, and basic preventive maintenance, • Report machine issues promptly to minimize downtime, • Maintain a clean, organized work area, • Follow all safety requirements, including PPE, lockout/tagout, and safe lifting practices, • Assist with manual machining, deburring, or assembly as production needs requireQualifications, • 2+ years of experience setting up and operating CNC vertical machining centers, • Hands-on experience with Haas, Fanuc, or similar controls, • Ability to read blueprints, including GD&T, • Proficiency editing G-code and M-code at the machine, • Skill with precision measuring tools, • Experience machining carbon steel and stainless steel, • Solid shop math skills, including trigonometry, • High school diploma or GED, • Reliable attendance and willingness to work regular overtime, • Experience with Mastercam, Fusion 360, or another CAM package, • 4th-axis or multi-part fixture experience, • Experience machining Monel, Hastelloy, Inconel, duplex stainless, or other specialty alloys, • Background with valves, pressure-containing parts, or oil and gas components, • Familiarity with ASME, API, or NACE material requirements, • Experience in an ISO 9001 shop, • Manual mill and lathe experience, • Technical school certificate or NIMS credentials in CNC machining Schedule Monday through Friday | 6:30 a.m. to 3:30 p.m. 30-minute lunch One 15-minute break in the morning One 15-minute break in the afternoon Regular overtime should be expected as order volume grows. Overtime is paid at time and a half for hours worked over 40 in a week. Occasional early starts or Saturday work may be required to meet ship dates. Work environment and physical requirements This is an active shop-floor position involving running machinery, coolant, and metal chips. The shop is not fully climate controlled, and Houston summers can be hot. • Stand and walk for most of an 8.5-hour shift, • Lift up to 50 lb. without assistance and heavier parts with a hoist or coworker, • Bend, reach, and grip tools and parts repeatedly, • Read fine print, scales, and gage readings, with correction if needed, • Wear safety glasses, steel-toe boots, and hearing protection in posted areas, • Operate an overhead crane or forklift after training, if certifiedWhy Openwork? Openwork has 50+ years of experience connecting talented people with great employers. We offer a people-first approach and opportunities to grow your career. Apply today atwww.openwork.comand take the next step in your career with Openwork! EOE Openwork is an Equal Opportunity Employer. Apply online on www.openwork.com and call our Clear Lake office at 281-486-1700 to get scheduled for an interview. \nCompany Description Openwork is a candidate-focused staffing company on a mission to bring ease, accessibility, and thoughtfulness to an industry we’ve held a footing in for 50+ years. We believe there’s more to life than livelihood, but that finding your dream job, career, or team is a really good place to start. Openwork is a candidate-focused staffing company on a mission to bring ease, accessibility, and thoughtfulness to an industry we’ve held a footing in for 50+ years. We believe there’s more to life than livelihood, but that finding your dream job, career, or team is a really good place to start.

Job Description Key Responsibilities include: • Apply thread lubricant or storage compound to threads, as required., • Apply proper thread protectors to finished threads to prevent damage., • Operate cut-off saw to cut off pipe ends or rejected threads as directed., • Operate swaging equipment as directed., • Manually drifts pipe as required., • Perform shop cleanup as needed., • Perform abrasive blasting of threaded ends as required., • Assist machine operators with heavy tooling used when setting up machines., • Assist Shop Helper II in performing phosphate coating & buckon product preparation., • Quality minded individual with experience in FVI., • Follow all work instructions, specifications and requirements., • Follow all Company Rules, Procedures and Policies., • Follow all Company Safety Rules., • Any other duties as assigned by Foreman or Manager. Requirements • High School education or equivalent, preferred., • 1-2 years of experience as a Production Operator., • Ability to operate a forklift., • Ability to read, write and speak English., • Should be able to lift and move objects weighing up to 50 lbs. and push/pull 75 lbs., • Ability to understand and execute instructions well.

Job DescriptionCNC MILL MACHINIST:As an ISO 9001 certified company, High Tech Machine provides reliable, quality machining and innovative, custom prototypes and solutions for Oil & Gas, Aerospace, Mining, Marine and other industries Worldwide. Quality and Safety are top priority at HTM. We are currently recruiting for a qualified CNC Mill Machinist. To be successful in this position, you must possess the following Qualifications: • 7+ years of experience required., • Ability to complete job from set-up to completion., • Detail oriented., • Personal Tooling required., • Meet deadlines., • Follow prescribed safety regulations., • Work Hours: M – F 6:00 a.m. – 4:30 p.m. with some Saturdays – 6:00 a.m. – 12:00 p.m. in fully air-conditioned shop., • Compensation based on level of experience. Benefits include: • Medical, Dental and Vision plus other voluntary options., • Paid holidays and Paid vacation., • 401(k)., • Fully air-conditioned shop. For consideration e-mail your resume and references OR apply in person Monday through Friday between the hours of 8:30 a.m. and 3:30 p.m. We are located in Northwest Houston (Eldridge and Emmett) at 6518 Wesco Way, Houston, TX 77041.

Job Description Finishing Operator | $18-$19 an hour | 1st Shift Monday through Friday 7am to 5pm What Matters Most • Competitive pay rate of $18 to $19 an hour based on experience, • Schedule: Monday through Friday 7am to 5pm, • Location: South Houston, • Temporary-to-hire opportunity with career growth and stability, • Weekly Pay with direct deposit or pay card, • When you work through The Reserves Network, you are eligible to enroll in dental, vision and medical insurance as well as 401K, direct deposit and our referral bonus program Job Description We are seeking a skilled Finishing Operator to assist in threading, grooving, and beveling pipes. You’ll be part of a dynamic team in a supportive environment where your expertise will be valued and your career growth encouraged. If you have a passion for precision and innovation, apply today to take the next step in your career. Responsibilities:, • Machine operation “groover” machine, • Grooving pipe for 8 hours, • Runs pipe through machine – pipe is either 20’ or 40’ in length, • Pipe is fed into machine from a nearby rackQualifications and Requirements:, • High School Diploma or GED required., • Experience in threading, grooving or beveling material., • Capable of being trained on thread specification and use proper QC tooling, • Ability to work overtime as needed., • Capable of regularly lifting and moving objects up to 50 lbs., • Must pass pre-employment screenings. Benefits and Perks:, • Competitive Salary: $18 to $19 an hour - Enjoy a competitive wage that reflects your skills and experience with potential for performance-based bonuses, • Comprehensive health, dental, and vision insurance., • Generous paid time off (PTO) and paid holidays., • 401(k) retirement plan with company match., • Opportunities for career advancement and professional development., • Supportive and inclusive work environment., • Employee wellness programs and resources., • Discounts on company products and services. Your New Organization: Join a dynamic and growing leader in the pipe supply industry where your skills and contributions are highly valued. Company offers a competitive salary, comprehensive benefits, and ample opportunities for career advancement in a supportive work environment. Their commitment to employee development and a positive workplace culture makes this a great place to build your career. Discover your future with a company dedicated to excellence and growth. Your Career Partner: The Reserves Network, a veteran-founded and family-owned company, specializes in connecting exceptional talent with rewarding opportunities. With extensive industry experience, we are dedicated to helping you achieve your professional goals and shine in your field. The Reserves Network values diversity and encourages applicants from all backgrounds to apply. As an equal-opportunity employer, we foster an environment of respect, integrity, and trust in every aspect of employment. In the spirit of pay transparency, we want to share the base salary range for this position is $18 to $19 an hour, not including benefits, potential bonuses or additional compensation. If you are hired, your base salary will be determined based on factors such as individual skills, qualifications, experience, and geographic location. In addition, we also believe in the importance of pay equity and consider the internal equity of our current team members as a part of any final offer. Please keep in mind that the range mentioned above is the full base salary range for the role. Hiring at the maximum of the range would not be typical to allow for future & continued salary growth

Job Description Press Brake Operator – Precision Sheet Metal Location: Stafford, TX Job Type: Full-Time Pay: $23-26/Hr. (DOE) Job Summary: We are seeking a skilled Press Brake Operator to join our precision sheet metal fabrication team. The ideal candidate will have experience setting up and operating CNC press brakes to bend and form sheet metal components according to engineering drawings and customer specifications. This position requires a strong attention to detail, the ability to maintain tight tolerances, and a commitment to producing high-quality parts in a fast-paced manufacturing environment. Responsibilities: • Set up and operate CNC press brake machines to form precision sheet metal parts., • Read and interpret blueprints, engineering drawings, and work orders., • Select proper tooling and perform machine setups for various material types and thicknesses., • Verify dimensions using calipers, tape measures, protractors, angle gauges, and other precision measuring instruments., • Perform first-piece, in-process, and final inspections to ensure quality standards are met., • Adjust machine settings to maintain accuracy and tight tolerances., • Identify material defects and report quality concerns to supervisors., • Safely handle raw materials and finished products., • Maintain a clean, organized, and safe work area., • Perform routine machine maintenance and assist with troubleshooting as needed., • Work closely with fabrication, welding, and quality control teams to meet production schedules. Qualifications: • Minimum of 2 years of CNC press brake experience in a precision sheet metal environment., • Ability to read and interpret blueprints and fabrication drawings., • Experience with precision measuring equipment., • Knowledge of bend deductions, bend allowances, and material properties is preferred., • Strong mechanical aptitude and attention to detail., • Ability to lift up to 50 pounds and stand for extended periods., • Dependable with a strong work ethic and commitment to safety., • Forklift and overhead crane experience is a plus.

Job DescriptionDescription: Description About Piping Technology & Products (PT&P) PT&P is a trusted leader in the design and manufacturing of engineered products for piping systems, proudly serving industries like oil & gas, power, and chemicals since 1978. Headquartered in Houston, we’re known for innovation, quality, and customer commitment. Join our team and help deliver solutions that keep critical infrastructure running safely and efficiently. Position Summary The Drill Press Operator is responsible for setting up, operating, and maintaining drill press machinery to produce precision holes in metal components according to blueprints and specifications. This role ensures parts meet required tolerances and quality standards while maintaining safe and efficient operation of equipment. Requirements: Responsibilities • Select proper drill bits, tooling, speeds, and feeds., • Set up and operate manual, semi-automatic, or radial drill presses., • Position and secure workpieces using clamps, vises, jigs, and fixtures., • Drill, tap, ream, countersink, and bore holes to required dimensions., • Inspect parts using calipers, gauges, and micrometers., • Verify hole depth, diameter, location, and tolerances., • Load/unload materials and prepare components for machining., • Follow OSHA and company safety procedures; wear required PPE., • Perform basic maintenance such as cleaning, lubrication, and replacing tooling., • Complete production logs and communicate job status to supervisors.Requirements Qualifications • High school diploma or GED required, • 1+ years of drill press or machining experience preferred., • Ability to read blueprints, technical drawings, and specifications., • Knowledge of machining principles, speeds, feeds, and tooling., • Good communication skills and ability to work with cross-functional teams, • Ability to follow instructions and work in a team environment., • Ability to multitask and prioritize in a fast-paced environment., • Must be able to pass pre-employment screenings and background checks, • Strong attention to detail, safety awareness, and teamwork. Physical Requirements • Must be able to stand for prolonged periods (8+ hours), • Must be able to lift, push, pull, or carry up to 50 lbs. independently, • Frequent bending, stooping, reaching, and manual handling of materials required, • Good hand-eye coordination and manual dexterity, • Ability to tolerate noise, heat, and dust in a manufacturing environment, • Visual acuity to read measuring tools, drawings, and detect quality defects, • Must pass initial and ongoing physical or occupational health screenings (e.g., lifting assessment, vision test, hearing test, etc.), • Must be able to wear required PPE, including steel-toe boots, gloves, safety glasses, and hearing protection. Work Environment Manufacturing floor with exposure to moving mechanical parts, sharp materials, and moderate to loud noise. May be exposed to hot or cold environments depending on season. Work schedule may include overtime, weekend shifts, or on-call schedules as needed.

Job Description Your Day-to-Day Impact You’ll play a vital role in our Production team by: • Adhere to all safety policies, procedures, and wear required PPE and uniform., • Apply thread lubricant or storage compound to threads as needed., • Install thread protectors to prevent damage to finished threads., • Operate saws to cut off pipe ends or rejected threads., • Operate swaging equipment as directed., • Manually drift pipe as required., • Perform shop cleanup and abrasive blasting of threaded ends., • Assist machine operators with heavy tooling during machine setup., • Assist in phosphate coating and product preparation., • Ensure quality control and follow all work instructions, specifications, and company rules., • Perform any other duties as assigned by the Lead, Supervisor, or Manager What You Bring We’re looking for candidates who are sharp, safety-focused, and ready to roll up their sleeves: • High School Diploma or equivalent, preferred., • 0-2 years of experience as a Production Operator., • Ability to operate a forklift and overhead crane once trained., • Must be fluent in English, with the ability to read, write, and communicate effectively., • Should be able to lift and move objects weighing up to 50 lbs. and push/pull 75 lbs., • Ability to understand and execute instructions well. What You’ll Gain • Get paid for what you know - and earn more as you learn more., • Opportunities to work on cutting-edge equipment, • A culture that values your input and celebrates improvement, • Real growth potential in a stable, essential industry And Benefits that Include: • Medical, Dental, and Vision Coverage, • Company-Paid Life Insurance & Short/Long-Term Disability, • Profit Sharing: Up to 4%, • 401(k): Company match 4.5% with no vesting period, • Paid Parental Leave: For birthing and non-birthing parents, including adoptions, • Paid Holidays: 10 days, plus 1 personal floating holiday, • Paid Vacation Time, • Discretionary Performance-Based Bonus Program, • Tuition Reimbursement Safety isn’t negotiable, it’s who we are. Every spark, every shift, and every decision is guided by a commitment that goes well beyond compliance. We don’t cut corners; we set the standard. That means clear expectations, continuous training, and shared accountability at every level. Protecting our people is more than a priority, it’s a promise we make to every colleague, every day.

Job Description North Houston - Spring, TX area $19-$22/hr, with 8% differential for night shift DOE. Temp to Hire. 5:00pm - 5:00am MUST be available for Overtime including Weekends REQUIRED: Experience with CNC Manual Lathe RESPONSIBILITIES • Able to read Blueprints, • Will operate a manual lathe to do rubber cutbacks on stators, • Operate overhead cranes, • Assemble and disassemble mold tooling, • Handle pipe with threading, • Handle tubes at an elevated temperature, • Assist Mechanics in repair work as necessary ESSENTIAL QUALIFICATIONS, • Must know how to use a measuring tape, • Professional written and verbal communication and interpersonal skills SKILLS, • Ability to lift 50 lbs., • Attention to detail., • Must be mechanically inclined., • Desma injection machine experience is a plus

Position Summary The 3D CNC Programmer / Operator is responsible for programming, setting up, and operating CNC milling and turning machines to produce precision flight-critical components and tooling for the aviation and aerospace industry. This role requires generating 3D toolpaths using CAD/CAM/V Carve software, selecting appropriate tooling and parameters for high-temp alloys and light metals, validating programs via simulation, and carrying out first-article inspections to stringent aerospace quality standards (e.g., AS9110). Key Responsibilities & Duties 1. CNC Programming & CAM/V Carve Software Create, optimize, and edit 3D and CNC programs using CAM/ V Carve. Interpret complex 3D CAD models, engineering blueprints, geometric dimensioning and tolerancing callouts, and aerospace customer specifications. Perform virtual machine simulation and collision checking to protect high-value aerospace machinery and workpiece stock. Select appropriate cutting tools, holders, speeds, feeds, and chip loads optimized for aerospace materials. 2. Setup & Operation Set up and operate CNC table and machining centers (e.g., Haas, DMG Mori, Mazak, Makino) safely and efficiently. Load program files, set work coordinate systems (WCS), tool offsets, and calibrate zero points using probing systems. Design, select, and install custom fixtures, vacuum chucks, and workholding devices required for complex, thin-walled, or contoured aerospace parts. Monitor machining operations, perform prove-outs on first-run programs, and adjust offsets or feed rates to ensure surface finish and dimensional tolerance requirements are met. 3. Quality Assurance & Aerospace Compliance Perform First Article Inspection (FAI) per AS9110 standards, verifying dimensions using precision measuring instruments (micrometers, calipers, height gauges, bore gauges) and CMM reports. Maintain strict traceability of materials, cutting tools, non-conforming parts, and process documentation as required by FAA / AS9110 quality management systems. Document process improvements, tool life tracking, and cycle-time optimizations. 4. Maintenance & Safety Perform routine preventative maintenance on CNC machinery, tooling, and ducting systems. Maintain a clean, organized, and safe work area adhering to 5S principles and OSHA guidelines. Follow standard operating procedures (SOPs) for handling hazardous materials and cutting fluids. Qualifications & Requirements Education & Experience Education: High school diploma or GED required. Associate degree or vocational certification in Precision Machining / CNC Programming strongly preferred. Experience: 3 to 5+ years of hands-on experience programming and operating 3D/CNC machines in aerospace, aviation, or high-precision defense manufacturing. Demonstrated experience working with tough aerospace alloys as well as light aerospace metals (Aluminum and stainless steels alloys) and composites. Technical Skills CAM/CAD/V Carve Software: Advanced proficiency in CAM software is a plus. GD&T & Blueprints: Thorough understanding of Geometric Dimensioning and Tolerancing standards. Tooling & Fixtures: Deep knowledge of cutting tool geometry, carbide/ceramic inserts, custom workholding, and high-speed machining (HSM) techniques. Preferred Certifications (Bonus) CNC Programmer or Machinist Certification. AS9100 / ISO 9001 internal quality system training. OSHA Safety. Physical Demands & Work Environment Ability to lift, push, or pull up to 45 lbs independently. Ability to stand for extended periods (8–10 hours per shift). Work environment includes exposure to industrial noise, oil mists, metal shavings, and heavy machinery (appropriate PPE provided). JSG offers medical, dental, vision, life insurance options, short-term disability, 401(k), weekly pay, and more. Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law. #D500

At a glance Company: General Plastics & Composites, LP Location: Houston, TX Pay: Competitive – Based on Experience Job Type: Full-Time Shift: Days | Monday–Friday | 6:00 AM – 6:00 PM Experience: 2+ Years Machines: CNC Mills • CNC Lathes • Manual Mills • Manual Lathes • Waterjet Controls: Mazatrol • G-Code / M-Code Why join General Plastics & Composites? General Plastics & Composites (GP&C) is a vertically integrated advanced manufacturing company that engineers and manufactures mission-critical composite and precision-machined components. From proprietary material formulation to machining, molding, assembly, and final validation, nearly every step of the manufacturing process happens under one roof. As a Machinist I, you'll join the Flex Machining team supporting both production and engineering work. This role is ideal for a machinist with a solid foundation in CNC machining who is ready to continue developing setup skills while working alongside experienced machinists, programmers, and engineers. If you're looking for a stable manufacturing environment where you'll work on challenging parts, build your technical skills, and have opportunities to grow into setup, programming, or senior machining roles, GP&C offers an excellent long-term career path. ⚙️ What you'll be doing In this role, you will: • Set up and operate CNC mills, CNC lathes, manual mills, manual lathes, and waterjet machines with moderate supervision, • Machine production and engineering parts while maintaining quality standards, • Read and interpret blueprints, drawings, and job documentation, • Assist with machine setups, tooling changes, and fixture preparation, • Perform preventative machine maintenance according to PM schedules, • Verify dimensions using precision measuring equipment, • Load and make basic edits to CNC programs when required, • Maintain safe, clean, and organized work areas, • Follow engineering instructions, SOPs, and quality procedures, • Work closely with experienced machinists and supervisors to continuously improve machining processes ️ Machines, controls & software Machines • CNC Mills, • CNC Lathes, • Manual Mills, • Manual Lathes, • Waterjet Machines Controls • Mazatrol, • G-Code / M-Code Inspection Equipment • Micrometers (OD & ID), • Calipers, • Bore Gauges, • Height Gauges, • Depth Gauges, • Protractors ⭐ Shop highlights • Advanced composites manufacturer, • Modern CNC machining department, • Engineering and production work, • High-mix manufacturing, • Tight-tolerance machining, • Opportunities to develop setup and programming skills, • Collaborative engineering support, • Stable full-time employment, • Career advancement opportunities Materials you'll work with • Fiberglass Composites, • Plastics, • Metals, • Metal Alloys ✅ What we're looking forRequired • 2+ years of CNC and/or manual machining experience, • Experience with CNC mills or CNC lathes, • Ability to read blueprints and engineering drawings, • Basic knowledge of G-Code, M-Code, or Mazatrol, • Experience using precision measuring tools, • Strong math skills, • High school diploma or GED, • Reliable attendance and strong work ethic, • Ability to work safely in a manufacturing environment Preferred • Setup experience, • Waterjet machining experience, • Experience machining composite materials, • Basic CNC program editing experience Why you'll like working here • Stable, long-term manufacturing environment, • Modern machining equipment, • Work alongside experienced machinists and engineers, • Opportunities to grow into setup, programming, and leadership roles, • High-skill machining on challenging parts, • Team-oriented culture built on precision, quality, and continuous improvement, • Clean, organized manufacturing facility Pay, benefits & schedule Pay Competitive compensation based on experience. Benefits • Medical insurance, • Dental insurance, • Vision insurance, • 401(k), • Paid time off, • Paid holidays Schedule • Monday–Friday, • 6:00 AM – 6:00 PM, • Overtime available as needed About General Plastics & Composites General Plastics & Composites is a Houston-based advanced manufacturing company specializing in precision machining, advanced composites, molding, and complete assembly solutions. With a 160,000-square-foot manufacturing facility and a highly integrated production process, GP&C serves customers requiring high-performance, mission-critical components where quality and precision cannot be compromised. Employees work in a collaborative environment where engineering, machining, and quality teams work closely together to solve complex manufacturing challenges. GP&C invests in modern equipment, technical development, and continuous improvement while providing long-term career opportunities for skilled manufacturing professionals. Apply today Ready to build your CNC machining career with a company that values craftsmanship, precision, and continuous improvement? Apply today through hireCNC to join the team at General Plastics & Composites.

Job Description Job description: Overview We are seeking a skilled and experienced Journeyman Electrician to join our team. The ideal candidate will have a strong background in electrical systems, with the ability to work independently and as part of a team. This role involves installing, maintaining, and repairing electrical systems in various settings, ensuring compliance with safety standards and regulations. Responsibilities • Install, maintain, and repair electrical systems and equipment in residential, commercial, or industrial settings., • Read and interpret blueprints, schematics, and technical drawings to determine the layout of electrical systems., • Utilize voltmeters, ohmmeters, and other testing devices to troubleshoot electrical issues., • Work with power tools and hand tools to complete tasks efficiently and safely., • Ensure all work complies with the National Electrical Code (NEC) and other relevant regulations., • Collaborate with other tradespeople and contractors to complete projects on time., • Perform preventive maintenance on electrical systems to minimize downtime., • Document all work performed and maintain accurate records of repairs and installations. Qualifications • Completion of an apprenticeship program or equivalent experience as an electrician., • Proficiency in blueprint reading and understanding of schematics., • Experience working with logic controllers and industrial electrical systems is preferred., • Strong problem-solving skills with the ability to troubleshoot complex electrical issues., • Familiarity with NEC standards and safety regulations related to electrical work., • Ability to work effectively both independently and as part of a team., • Excellent communication skills to interact with clients, contractors, and team members., • Must have controls EXP, • A valid electrician's license is required., • Must have State journeyman or NCCER license, • TWIC card Join our dedicated team where your expertise will contribute to our commitment to quality service and safety in every project we undertake. Job Type: Full-time \nCompany Description Based in Houston, Taurus Industrial Group (Taurus) is a leading, integrated and industry-diversified technical services company offering end-to-end services across multiple service lines. Leveraging a growing footprint with operations in the U.S., Canada, and Mexico, Taurus’s service offerings cover engineering and automation, electrical and instrumentation, power systems testing and commissioning, civil and mechanical crafts, pipe and structural steel fabrication, rotating equipment maintenance and repairs, full-service soft crafts, insulation and scaffold, specialty tooling and machining, technical bolting, heat treating, hot-tapping, line stopping and NDT / inspections. With over 60 years of continuous, safe, and reliable operating experience, Taurus operates across multiple industries and sectors, providing front-end engineering, routine maintenance, capital projects, and turnaround services. We service multiple areas of the energy industry, from our origins in traditional petrochemical and refining industries to the broader power, natural gas, midstream, industrials, and the emerging renewables market. Based in Houston, Taurus Industrial Group (Taurus) is a leading, integrated and industry-diversified technical services company offering end-to-end services across multiple service lines. Leveraging a growing footprint with operations in the U.S., Canada, and Mexico, Taurus’s service offerings cover engineering and automation, electrical and instrumentation, power systems testing and commissioning, civil and mechanical crafts, pipe and structural steel fabrication, rotating equipment maintenance and repairs, full-service soft crafts, insulation and scaffold, specialty tooling and machining, technical bolting, heat treating, hot-tapping, line stopping and NDT / inspections.\r\n\r\nWith over 60 years of continuous, safe, and reliable operating experience, Taurus operates across multiple industries and sectors, providing front-end engineering, routine maintenance, capital projects, and turnaround services. We service multiple areas of the energy industry, from our origins in traditional petrochemical and refining industries to the broader power, natural gas, midstream, industrials, and the emerging renewables market.

Job Description JOB DESCRIPTION – MAINTENANCE MECHANIC Organization UPG Company LLC Position Maintenance Mechanic - Direct Reports n/a FLSA Hourly Employees Progress Level Employee Position Location 7865 Northcourt Rd, Suite #100, Houston, Texas 77040 Website www.upgintl.com Company Overview UPG is a global manufacturer of complex assembled components and finished products serving the data center, automotive, energy and industrial markets. UPG products are sold to over forty global blue-chip customers and the company has developed a strong market position based on its technical expertise combined with unparalleled quality, delivery, and service levels. UPG operates three world-class manufacturing facilities – in Houston, Texas; Cardiff, Wales; and Suzhou, China – that offer a complete range of capabilities, including product design, engineering, rapid prototyping, and plastic injection molding, along with a suite of other technology platforms, value added assembly and global supply chain management. Reporting Relationship Reports to the Senior Maintenance Mechanic Core Function The Maintenance Mechanic is responsible for executing advanced mechanical and electrical maintenance, fixture building, and troubleshooting equipment. This hands-on role requires a high level of technical proficiency and initiative, working independently to support production uptime and continuous improvement. While not a supervisory role, this position may provide informal guidance to junior team members as needed. Responsibilities • Perform complex mechanical and electrical maintenance and repairs across manufacturing equipment., • Build, install, and maintain custom fixtures and jigs for use in production processes., • Troubleshoot and repair electro-mechanical systems, including motors, sensors, wiring, and controls., • Collaborate with engineers and operators to address machine performance issues., • Maintain and execute preventive maintenance schedules and documentation., • Assist with the implementation of safety protocols and compliance with regulatory standards., • Monitor the condition of critical systems and suggest improvements or replacements., • Interpret mechanical and electrical schematics, wiring diagrams, and G-code., • May assist in training or mentoring less experienced technicians in technical tasks., • Other duties as assigned. Education Requirements High School Diploma or General Education Diploma; and 2-Year Degree from an accredited technical college or trade school. Work experience can be substituted for education. Experience Requirements • At least 5 years of hands-on experience in a manufacturing or maintenance technician role., • Experience in the design and construction of production fixtures and tooling., • Strong working knowledge of electrical systems, motor controls, and safety standards. Skills Requirements • Expertise in troubleshooting mechanical, pneumatic, and electrical issues., • Skilled in reading blueprints, technical drawings, wiring schematics, and CNC code., • Strong computer skills, including familiarity with Microsoft Office and CAD software., • Forklift operation and machine safety knowledge., • Clear and professional communication skills., • Strong attention to detail and ability to work independently. Core Competencies • Analytical Thinking – Solve complex mechanical and electrical problems., • Collaboration – Work closely with engineering, operations, and maintenance teams., • Initiative – Take ownership of maintenance tasks and drive improvements. Physical Requirements Medium Work - Exerting up to 50 pounds of force occasionally, and / or up to 20 pounds of force frequently, and / or up to 10 pounds of force constantly to move objects. Visual Acuity The worker is required to have close visual acuity to perform an activity such as; preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and or operation or machines (including inspection); using measurement devices; and/or assembly or fabrication of parts at distance close to the eyes. Work Conditions The worker is subject to inside environmental conditions: Protection from weather conditions but not necessarily from temperature change. AAP/EEO Statement Equal Opportunity Employer: Disability/Veteran

Job DescriptionPosition Summary We are seeking a dependable and organized IE Manufacturing Technician to support production operations by managing inventory, ordering supplies, and assembling production equipment and workstations. This role is responsible for maintaining the tool crib, ensuring materials and equipment are available when needed, and supporting efficient production setup and workflow. Key Responsibilities • Maintain organization and inventory accuracy within the tool crib and storage areas, • Order tools, parts, supplies, and consumable materials required for production operations, • Track inventory levels and maintain appropriate stock quantities, • Receive, inspect, label, and stock incoming materials and equipment, • Assemble production tables, workstations, racks, carts, and other work equipment as needed, • Coordinate with production, maintenance, and engineering teams to support operational needs, • Issue and track tools, equipment, and supplies to employees and departments, • Maintain records of inventory usage, purchase orders, and equipment assignments, • Perform routine inspections of tools and equipment to ensure proper condition and functionality, • Support workplace organization and 5S initiatives, • Assist with moving, installing, or reconfiguring production equipment and work areas, • Follow company safety procedures and maintain a clean, safe work environmentRequired Qualifications, • High school diploma or equivalent, • Previous experience in inventory control, warehouse operations, tool crib management, or manufacturing support preferred, • Basic mechanical aptitude and ability to assemble equipment using hand and power tools, • Strong organizational and time management skills, • Ability to operate basic computer systems and inventory software, • Good communication and teamwork skills, • Ability to lift and move materials and equipment as requiredPreferred Qualifications, • Experience with purchasing or supply ordering processes, • Familiarity with manufacturing or industrial environments, • Forklift certification or material handling experience, • Knowledge of 5S, lean manufacturing, or inventory management practices, • Experience using ERP or inventory tracking systemsWork Environment, • Manufacturing plant or warehouse environment, • Frequent standing, walking, bending, lifting, and material handling, • May involve use of hand tools, power tools, ladders, and material handling equipment, • Exposure to production equipment and industrial noise levelsSample Job Title Variations, • Tool Crib Technician, • Tool Room Attendant, • Production Support Technician, • Inventory & Tooling Technician, • Manufacturing Support Technician, • Tooling and Supply Coordinator Powered by JazzHR PcGAxJh4ZB

Job Description Position Overview: The Elevator Technician position consists of performing field service work on all types of elevators, VRCs, and Rack and Pinion utilizing methods and procedures considered proper within the industry. A technician is expected to be an authority on most technical aspects of the elevator industry. Job Duties and Responsibilities: • Onsite representation of the company in an expert and professional manner., • Demonstrate expert knowledge in Electrical/Mechanical/Structural /Application/Estimation., • Demonstrate the ability to supervise varied number of personnel., • Demonstrate the desire to make decisions/supervise work in the best interest of company., • Demonstrate the desire to work as a team member at any level required to complete job., • Assist the company in maintaining proper appearance, conduct, productivity., • Acquire and maintain tooling needed to perform previous listed technical requirements in a superlative manner., • Demonstrate the desire to work in a safety and healthy manner. Hoist & Crane Service Group offers training for all employees, competitive wages, and benefits packages including: Medical Dental Vision coverage Long and short-term disability 401K Mechanics are also eligible for our annual Team Incentive Bonus and tablets, cell phones, and company trucks are available. Required Qualifications: • Must have 4+ years' experience in the elevator industry or equivalent, • Possess or be eligible to get a CET or NEIEP elevator mechanic's certificate, • Possess or be eligible to get a TWIC card, • Elevator knowledge, • Must be able to lift up to 50 pounds and sit or stand for long periods of time, • Strong communication skills, written and verbal, • Computer proficient, • Exceptional customer service skills, • Must be able to pass Drug/alcohol screening and background check, • Proven ability to communicate written /verbal, • Good Verbal/Written Communication Skills, • Knowledge of tools/craft, • Must be dependable, • Organizational Skills Must be able to pass a pre-employment drug test and background (DISA) and submit to random and annual drug testing as required.

Job Description Who We Are: Venus Aerospace is revolutionizing rocket engine propulsion. With the first generational leap in rocket engine technology since Apollo, our proprietary Rotating Detonation Rocket Engine and Venus Detonation Ramjets deliver historic efficiency and performance across aerospace applications. We are building the next generation of propulsion platforms that enable breakthrough capabilities in space, defense, and commercial high-speed flight. Our team thrives on solving the toughest engineering challenges and pushing the boundaries of what’s possible in aerospace. At Venus, we’re looking for bold engineers and innovators who want to make history and redefine the future of propulsion. The Role: Aerospace Integration Technician Venus Aerospace is looking for a highly skilled Aerospace Integration Technician to support our progression from R&D to scalable production of next‑generation propulsion systems. This role is hands‑on and technically demanding, ideal for someone who thrives in an environment that supports fast‑iteration and wants to help build the foundation of future production capabilities. What You’ll Get To Do • Perform detailed assembly, alignment, and integration of propulsion system hardware, including combustion components, fluid routing, and instrumentation, • Execute precision mechanical operations: torquing, clocking, fixturing, alignment verification, and critical-to-quality measurements throughout the build, • Assist in developing and maturing build processes by identifying workflow improvements, creating repeatable procedures, and supporting early production tooling and fixture development, • Integrate electrical harnessing, sensors, and instrumentation with careful attention to routing, shielding, and environmental constraints, • Conduct system-level checkouts including leak checks, continuity tests, pressure checks, and instrumentation validation, • Support test operations by preparing hardware, performing configuration changes, troubleshooting system issues, and ensuring integration integrity, • Document builds, capture deviations, and collaborate tightly with engineering to refine designs, tolerances, and manufacturability, • Help establish best practices at Venus from prototype hardware install to a stable production baseline systemWhat You Have, • Hands-on experience with precision machined components (rocket engines, ICE engines, Jet engines or the like. Valves and high‑pressure fluid systems, or similar), • Ability to interpret complex CAD drawings, schematics, assembly models, fluid system diagrams, and engineering work instructions, • Skilled with precision tools: calipers, micrometers, height gauges, borescopes, dial indicators, torque tools, and alignment instruments, • Experience assembling and integrating fluid systems, • Familiarity with clean‑build standards, contamination control, and aerospace-quality mechanical workmanship, • Strong troubleshooting skills across mechanical, electrical, and fluid subsystems, • Comfortable in an R&D environment where designs evolve rapidly, and ability to contribute to the creation of repeatable processes for production, • High attention to detail, strong communication, and a safety‑first mindset, • A strong desire to learn and teach hard earned skillsWhat Will Set You Apart, • Hands‑on experience assembling and integrating liquid‑propellant rocket engines or pressure‑fed propulsion systems, including injectors, valves, manifolds, ignition hardware, and high‑pressure fluid plumbing, • Ability to validate precision tolerances, torque specifications, flange alignment, seal interfaces, and pressure‑rated fittings during propulsion hardware build‑up, • Strong troubleshooting skills using leak‑check signatures, pressure‑flow data, instrumentation readings, electrical continuity results, and mechanical alignment measurements to identify root causes across propulsion subsystems, • Experience developing or refining assembly sequences, QC checkpoints, torque patterns, contamination‑control steps, and test‑readiness procedures for propulsion hardware, • Familiarity designing or improving tooling and fixtures for propulsion assembly, such as alignment jigs, routing guides, leak‑check adapters, and fixturing for injector or manifold installations, • Comfortable integrating harnessing, sensors, ignition systems, and test instrumentation with proper shielding, routing, connector clocking, and thermal‑protection considerations, • Ability to support early‑stage propulsion development by documenting as‑built configurations, deviations, configuration changes, and test‑driven design feedback, • Experience working with tight‑tolerance, prototype propulsion hardware where precision fit‑up, cleanliness, proper torque, and controlled routing are critical to hot‑fire success Location:On-site in Houston, TX Benefits:Venus Aerospace employee benefits include a 401(k) plan, stock options, and medical benefits, including dental and vision. We have a flex-Friday flexible schedule, unlimited PTO, and receive professional development opportunities. ITAR Requirements This position involves access to technology that is subject to U.S. export controls. Any job offer made will be contingent upon the applicant’s capacity to serve in compliance with U.S. export controls. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be able to meet ITAR requirements (U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State). You can learn more about ITAR here. Venus Aerospace is an Equal Opportunity Employer including Disabled/Veterans. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. If you have a disability and believe you need a reasonable accommodation, please email careerassistance@venusaero.com or call (281) 203-0027.This email and phone number were created exclusively to assist job seekers whose disability prevents them from being able to apply online. Messages or any other purposes, such as following up on an application, third party staffing agencies, website technical issues, or any other issues not related to a disability, will not receive a response. Messages will be returned within five business days. For additional information about our Equal Opportunity Employment Policy, please visit our EEOP page. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description EHC is seeking a Maintenance Technician for a Client in the Houston Area $18-$20 / Split Shift (1pm-10pm) Monday – Saturday; OT available. Must be willing to work 7 days a week, if needed. Primary Function As a Maintenance Technician, you will contribute to operational success by troubleshooting, inspecting, maintaining, and repairing equipment and tooling to support production schedules and ensure efficient operations. Duties and Responsibilities • Perform basic mechanical and electrical tasks., • Conduct routine maintenance and equipment repairs., • Follow directions and work assignments provided by the supervisor., • Adhere to all workplace safety policies and procedures., • Perform other duties as assigned. Tools, Equipment, and Machines • Utilize applicable inspection, measuring, testing, and maintenance equipment in accordance with established work instructions and procedures. Qualifications Education • High School Diploma or GED preferred; trade school training is a plus., • Ability to read and write. Experience • Minimum of two (2) years of industry-related experience. Skills and Abilities • Demonstrated ability to perform required job duties within 90 days of employment., • Basic knowledge of mechanical and electrical maintenance practices. Training Requirements • Completion of company safety training., • Review of required materials related to quality and management systems., • Participation in quality orientation and onboarding programs., • Completion of formal training on work instructions, procedures, and applicable industry standards as outlined in the training matrix.

Job Description JOB SUMMARY Rotating Machinery Services Inc. is seeking a 2nd Shift Rotor Balancing Technician to perform mechanical assembly, inspection, precision measurement and balancing operations on turbomachinery components and rotating assemblies. The ideal candidate will have experience with rotating equipment, turbomachinery, mechanical assembly, or a related field. RMS is also willing to train a mechanically inclined candidate who demonstrates strong mechanical aptitude, attention to detail, a commitment to safety, and a willingness to learn. This position requires the ability to work with precision equipment and large rotating components while following procedures, drawings, work instructions, and quality requirements. SKILLS REQUIRED ORGANIZATIONAL • Strong attention to detail and commitment to quality., • Demonstrated ownership and accountability for assigned responsibilities., • Commitment to maintaining a safe, clean, and organized work environment. INTERPERSONAL • Excellent interpersonal and customer service skills., • Strong verbal and written communication skills., • Ability to work effectively both independently and as part of a team. EFFICIENCY • Ability to read and interpret basic mechanical drawing and work instructions., • Ability to prioritize tasks, manage time effectively and meet deadlines., • Ability to adapt to changing schedules and business needs. PRIMARY ROLE RESPONSIBILITIES • Perform Phase I and Phase II inspection, as well as final build / balance on new and used Rotating Elements (and sub-components) for RMS and non-OEM turbomachinery including: Axial, Single Stage Overhung, Horizontally and Vertically Split Multi-Stage, and Oil Free Screw Compressors; Hot Gas Expanders; Steam Turbines; and other rotating equipment as needed, • Experience operating rotor balancing equipment and balancing systems, such as Easy Balance and Schenck systems, • Perform precision measuring, pre-stack dimensional inspections, and pre / post overspeed inspections, • Familiar with subcomponents in Rotor Shop including impellers, sleeves, balance pistons, shafts, etc., • Ability to perform visual inspections with ability to identify and communicate key findings, • Ability to work safely with large and heavy rotating equipment and components, including rotors weighing 20,000+ pounds, using appropriate lifting equipment and procedures, • Maintain a safe working environment and a commitment to safety excellence., • Responsible for understanding and complying with the safety policy, procedures, and instructions., • Assemble components in accordance with procedures, drawings, work instructions, and specifications., • Perform precision balancing on components and rotating assemblies to specified requirements., • Use calipers, gauges, micrometers & other measuring tools to determine the condition of components and assemblies., • Assemble various configurations of components to corresponding assembly prints utilizing available tooling, gauging and equipment., • Generate inspection reports as required and assist with documenting quality issues and solutions., • Maintaining a clean and organized work area and embrace 5S metrology., • Ability to understand assembly and manufacturing prints., • Other projects and responsibilities may be added at the company’s discretion. ADDITIONAL RESPONSIBILITIES GENERAL: The above list of activities is not all-inclusive but a general representation of the requirements of the RMS 2nd Shift Rotor Balancing Technician. This above list is subject to change based on the needs of the company. REQUIRED EXPERIENCE & QUALIFICATIONS • Minimum of two years of experience with rotor balancing, turbomachinery, rotating equipment, mechanical assembly, or related manufacturing/repair environment., • Experience with final assembly, inspection, or repair of rotating equipment., • Previous experience in an industrial, manufacturing, machining, or mechanical repair environment. REQUIRED EDUCATION • High School Diploma or GED from an accredited school or institution. ADDITIONAL REQUIREMENTS • The position may be based in RMS’s Pasadena, TX facility., • This is a full-time position, with a minimum expectation of 40 hours per week. Additional hours, including evenings or weekends may be required based on company and project needs., • This position can be required to participate in the company random or customer specific drug and alcohol screening and background check., • Ability to act professionally under stressful situations., • Able to understand, read, write and speak English., • Ability and willingness to lift objects weighing up to 50 lbs.(with assistance), walk, climb, reach, kneel, crawl, and balance., • Must be able to use hands for assembling and tool usage, • While performing the duties of this position the employee will be required to stand, sit, bend, and walk for significant portions of the shift, • Must not have allergies or issues related to handling metals, including aluminum, copper, bronze, and steel., • Must possess a valid driver’s license., • Ability to pass a pre-employment drug, alcohol screening, and background check., • Authorized to work in the United States, • RMS Inc. may have government contracts that impose specific requirements on employees working on those projects. If an employee does not meet these requirements, they may be reassigned to a different location or be ineligible to work on certain assignments. WORK ENVIRONMENT While performing the duties of this position, the employee may work / enter a shop or field service environment with exposure to moving mechanical parts. While the work area may be described as generally clean, safe, and "not loud", there will be machining operations that generate moderate noise WHAT WE OFFER • Competitive Pay, • Paid Time Off, • Medical / Dental / Vision, • 401k, • Employee Incentive Programs, • Employee Reimbursement Programs Come Join Rotating Machinery Services Inc. and watch your Career go TURBO! Visit www.rotatingmachinery.com to learn more about who we are and what we do. ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise—all backed by responsiveness in competitive prices and lead times. RMS’ commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description We are? We are EnerMech, a specialist service company that delivers safe, integrated solutions for complex energy projects. For over 50 years, we’ve been energizing our clients across the world with unrivalled expertise, equipment, and technology that supports the entire asset life-cycle – offshore and on land. We enable progress through our three global business lines: Energy Solutions, Infrastructure & Industrial Solutions, and Lifting Solutions. Within these areas, we offer a wide range of services, including cranes, lifting, fluid power, training, equipment rental, pipeline and subsea, process, and valves – all designed to help our clients optimize performance, enhance reliability, and improve efficiency. With a focus on operational excellence, we deliver value through our customized integrated solutions. This approach reduces risk and enhances efficiencies making us a leading and trusted partner every step of the way. The Role and Responsibilities EnerMech have a new opportunity for a Hydraulic Technician, Tube Instrument Fitter to join the Fluid Power Products team in Houston. This role is responsible for the fabrication, installation, inspection, testing, and maintenance of stainless steel hydraulic and instrumentation tubing systems ranging from 1/4" to 2" in diameter. This position requires the ability to interpret engineering drawings and P&IDs, fabricate precise tubing runs, perform coning and threading for medium- and high-pressure tubing, install tubing supports, and ensure all hydraulic systems meet customer specifications and industry safety standards. The Requirements Essential Duties and Responsibilities • Install, bend, route, and secure stainless steel tubing from 1/4" through 2" OD., • Fabricate tubing assemblies using manual and hydraulic tube benders., • Measure, cut, deburr, clean, and prepare tubing for installation., • Cone and thread medium-pressure (MP) and high-pressure (HP) stainless steel tubing using manufacturer-approved tooling and procedures., • Install MP and HP tubing connections, glands, collars, and pressure fittings in accordance with manufacturer specifications., • Install compression fittings, pipe fittings, valves, manifolds, clamps, supports, and hydraulic components., • Read and interpret hydraulic schematics, P&IDs, isometric drawings, and fabrication drawings., • Ensure proper tube routing, spacing, support, bend radii, and fitting alignment to prevent vibration, fatigue, and leaks., • Perform pressure testing, flushing, and leak testing of hydraulic systems., • Troubleshoot hydraulic systems and repair tubing, fittings, valves, and component failures., • Install and torque hydraulic fittings in accordance with manufacturer specifications., • Maintain hydraulic system cleanliness to minimize contamination and ensure system reliability., • Perform preventative maintenance and repairs on hydraulic equipment., • Operate tubing fabrication equipment including tube benders, coning and threading machines, flaring tools, saws, threaders, and pressure testing equipment., • Document completed work, inspection results, and pressure test records., • Maintain a safe and organized work environment while complying with company safety policies., • Travel to customer facilities and offshore/onshore job sites as required. Required Qualifications • High school diploma or GED., • Minimum of 3 years of hydraulic tubing installation or related industrial experience., • Experience installing 316 stainless steel tubing from 1/4" through 2"., • Experience coning and threading MP and HP stainless steel tubing., • Knowledge of medium- and high-pressure tubing systems and pressure-rated fittings., • Proficient in the use of hand tools, power tools, tube benders, and coning/threading equipment., • Ability to read and interpret hydraulic schematics and engineering drawings., • Knowledge of compression fitting systems such as Parker A-LOK, Swagelok, Hy-Lok, Autoclave Engineers, HIP, or equivalent., • Strong mechanical aptitude and troubleshooting skills., • Ability to work independently and as part of a team., • Valid driver's license and ability to travel as required. Preferred Qualifications • Experience in oil & gas, petrochemical, pipeline, offshore, or industrial environments., • Experience with hydraulic flushing, cleanliness verification, and hydrostatic pressure testing., • Experience assembling and testing hydraulic control panels, manifolds, and power units., • Forklift, aerial lift, or overhead crane certification., • TWIC Card., • OSHA 10 or OSHA 30 certification. Physical Requirements • Ability to lift up to 50 pounds., • Ability to stand, kneel, bend, climb ladders, and work in confined spaces., • Ability to work outdoors in varying weather conditions., • Ability to wear required personal protective equipment (PPE). Knowledge, Skills, and Abilities • Excellent attention to detail and workmanship., • Strong understanding of hydraulic systems, fluid power principles, and pressure-containing tubing systems., • Ability to fabricate neat, accurate, leak-free tubing installations., • Strong communication and problem-solving skills., • Ability to prioritize multiple tasks while meeting project deadlines., • Commitment to quality, safety, and customer satisfaction. Diversity & Inclusion EnerMech is dedicated to fostering a diverse and inclusive organisation. We believe that diversity enriches our team, and we welcome applications from candidates of all backgrounds, cultures, and identities.

Job Description:\n\nAbout Us:\nPanelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery.\n\nSince 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently.\nJob Summary:\nPanelmatic, Inc. is seeking an experienced and results-driven Base Fabrication & Paint Manager to oversee the daily operations and overall performance of the base fabrication and paint departments. This position is responsible for managing structural steel fabrication, welding, component assembly, surface preparation, and industrial painting operations to ensure products meet quality standards and production schedules.\nThe Base Fabrication & Paint Manager will lead production personnel, supervisors, and team leads while coordinating labor, materials, equipment, workflow, and production priorities. This role will ensure fabricated steel structures and components are completed according to engineering drawings, project specifications, quality requirements, and customer expectations.\nThe ideal candidate will have extensive experience in structural steel fabrication and industrial paint operations, along with a proven track record of managing teams in a manufacturing or industrial environment. This individual must be a strong leader capable of coordinating multiple production processes, improving operational efficiency, maintaining a safe work environment, and ensuring quality throughout fabrication and paint operations.Job DutiesLeadership & Team Management\n\n Provide overall leadership and direction for the base fabrication and paint departments.\n Supervise, coach, train, and develop supervisors, leads, fabricators, fitters, welders, painters, and other production personnel.\n Establish clear expectations for safety, quality, productivity, attendance, and employee performance.\n Assign personnel and resources based on employee skill sets, production schedules, and project requirements.\n Monitor employee performance and productivity, providing feedback and coaching as needed.\n Participate in interviewing, hiring, onboarding, training, and performance management activities.\n Identify training needs and support cross-training and employee development.\n Hold team members accountable for meeting production goals, quality standards, and established procedures.\n Promote a culture of teamwork, accountability, communication, and continuous improvement.\nBase Fabrication Operations\n\n Oversee daily structural steel fabrication operations to ensure production goals and project deadlines are met.\n Manage fabrication activities involving carbon steel, structural channel, I-beams, and other applicable structural steel materials.\n Oversee material layout, measuring, cutting, fitting, welding, grinding, and assembly activities.\n Ensure fabrication work is completed according to approved blueprints, engineering drawings, work orders, and project specifications.\n Provide technical guidance on fabrication methods, fit-up, weld preparation, and assembly techniques.\n Ensure fabricated structures and components meet dimensional, structural, and workmanship requirements.\n Monitor production workflow and identify bottlenecks, delays, and resource constraints.\n Coordinate labor, materials, tools, and equipment to maintain efficient production.\n Troubleshoot fabrication challenges and coordinate with Engineering or other departments to resolve drawing discrepancies and technical issues.\n Ensure completed fabricated components are ready for the next stage of production, including paint operations.\n Support hands-on troubleshooting when necessary to meet production requirements.\nPaint Operations & Finishing\n\n Oversee daily industrial painting operations to ensure production schedules, quality requirements, and customer specifications are met.\n Manage paint department workflow, staffing, workload distribution, and production priorities.\n Oversee surface preparation and application of industrial coatings, including two-part epoxy wet paint systems.\n Ensure employees follow established procedures for paint mixing, application, curing, handling, and finishing.\n Verify that surfaces are properly prepared before paint application and that completed products meet applicable finish requirements.\n Ensure paint products and coating systems are handled, stored, mixed, and applied according to manufacturer instructions and safety requirements.\n Monitor paint quality, coating coverage, finish consistency, and defects.\n Identify and resolve issues involving coating adhesion, surface defects, improper application, and rework.\n Coordinate the movement of fabricated components between fabrication, paint, and subsequent production stages.\n Ensure paint materials, supplies, equipment, and PPE are available to support production requirements.\n Monitor paint department productivity and implement improvements to reduce waste, rework, and turnaround time.\nProduction Planning & Workflow Management\n\n Establish daily and weekly production priorities across base fabrication and paint operations.\n Coordinate fabrication and paint schedules to ensure efficient workflow and on-time completion of projects.\n Work with Production Leadership, Project Management, Engineering, Quality, and Procurement to align department activities with project requirements.\n Ensure adequate staffing, materials, consumables, equipment, and tools are available to meet production demands.\n Monitor workload and adjust priorities to prevent bottlenecks between fabrication and paint.\n Track project progress and communicate potential delays, material shortages, equipment issues, or staffing concerns to leadership.\n Balance labor and resources across both departments to maximize productivity and efficiency.\n Coordinate overtime and staffing requirements based on production workload and business needs.\n Ensure completed products move efficiently through production and are released to subsequent operations on schedule.\nQuality Control\n\n Establish and maintain quality standards for fabrication, welding, surface preparation, and painting operations.\n Ensure fabricated structures meet drawing dimensions, tolerances, structural requirements, and project specifications.\n Ensure painted products meet required coating, coverage, appearance, and workmanship standards.\n Monitor production processes to identify quality concerns before products advance to subsequent operations.\n Coordinate inspections and verify that completed work meets applicable company quality procedures.\n Investigate quality issues and implement corrective actions to prevent recurring defects.\n Collaborate with Quality and Engineering to resolve nonconformances and customer specification concerns.\n Reduce scrap, coating defects, weld rework, material waste, and production errors.\n Maintain compliance with applicable Quality Assurance Procedures and project requirements.\nSafety & Environmental Compliance\n\n Enforce company safety policies and established procedures throughout fabrication and paint operations.\n Ensure employees are trained in the safe operation of fabrication machinery, welding equipment, cutting tools, grinders, and paint application equipment.\n Promote proper use of personal protective equipment, including eye, hearing, respiratory, and other required protection.\n Ensure paint operations follow applicable procedures for handling coatings, solvents, and other chemicals.\n Maintain a clean, organized, and safe production environment.\n Ensure appropriate ventilation and safe work practices are followed in designated paint areas.\n Address unsafe conditions and work practices promptly.\n Participate in safety meetings, inspections, incident reviews, and corrective action initiatives.\n Promote a culture of safety, accountability, and environmental awareness across both departments.\nEquipment & Maintenance\n\n Monitor the condition and performance of fabrication machinery, welding equipment, paint application systems, and related production equipment.\n Ensure equipment is operated safely and maintained according to established procedures.\n Coordinate preventive maintenance and repairs to minimize unplanned downtime.\n Identify equipment, tooling, and facility needs that may improve production capacity and efficiency.\n Work with Maintenance to resolve equipment issues and coordinate necessary repairs.\n Ensure employees properly operate, inspect, and maintain assigned equipment.\n Evaluate opportunities to improve equipment utilization and production capabilities.\nContinuous Improvement & Cost Management\n\n Identify opportunities to improve fabrication and paint processes, productivity, quality, and workflow.\n Implement process improvements that reduce material waste, rework, downtime, and unnecessary labor.\n Monitor labor utilization, material consumption, paint usage, and production costs.\n Evaluate fabrication and paint methods to improve consistency and operational efficiency.\n Standardize work practices and reinforce adherence to established procedures.\n Use production data and employee feedback to identify operational improvements.\n Support Lean Manufacturing and continuous improvement initiatives.\n Promote effective coordination between fabrication and paint to reduce delays and improve throughput.\nReporting & Performance Management\n\n Maintain accurate production, quality, staffing, equipment, and material usage records.\n Monitor departmental performance against established production goals and project schedules.\n Track and report key performance indicators, including:\n \n Production output and productivity\n Labor utilization and efficiency\n Schedule adherence\n Fabrication quality and rework\n Paint quality and coating defects\n Material and paint consumption\n Scrap and waste\n Equipment downtime\n Safety performance\n \n Analyze production trends and implement corrective actions when goals are not being met.\n Provide regular updates to leadership regarding production status, staffing, quality, and operational challenges.\nCross-Functional Collaboration\n\n Work closely with Production Leadership, Engineering, Project Management, Quality, Procurement, and other departments to support successful project execution.\n Participate in production planning meetings and project reviews.\n Communicate production requirements, resource needs, project status, and potential schedule risks.\n Collaborate with Engineering to resolve fabrication drawing discrepancies and technical issues.\n Coordinate with Procurement to ensure steel, welding consumables, coatings, and other materials are available when needed.\n Partner with Quality to resolve fabrication and paint defects.\n Coordinate fabrication and paint activities to ensure products are completed according to schedule and are ready for downstream assembly and delivery.\n\nRequirements\n\n High school diploma or equivalent required.\n 5+ years of experience in structural steel fabrication, welding, industrial painting, manufacturing, or a related field.\n 3+ years of supervisory or management experience in a manufacturing, fabrication, welding, or industrial paint environment.\n Strong knowledge of structural steel fabrication processes, including cutting, fitting, welding, grinding, and assembly.\n Experience with industrial painting operations and coating application, preferably involving two-part epoxy wet paint systems.\n Ability to read and interpret blueprints, fabrication drawings, work orders, and technical specifications.\n Strong understanding of measurements, dimensional tolerances, and fabrication requirements.\n Ability to accurately read a tape measure, convert decimals to fractions, and use conversion charts.\n Experience managing production schedules, allocating labor, and coordinating multiple workflows.\n Knowledge of fabrication quality standards and industrial paint quality requirements.\n Strong leadership, communication, organizational, and problem-solving skills.\n Ability to manage competing priorities while meeting production deadlines and quality expectations.\n Strong commitment to workplace safety and established operating procedures.\n Ability to work effectively with employees at all levels of the organization.\nPreferred Qualifications\n\n Associate degree or technical certification in Welding, Metal Fabrication, Manufacturing Technology, Industrial Coatings, or a related field.\n Experience managing both structural fabrication and industrial paint departments.\n Experience in custom industrial manufacturing, electrical enclosures, packaged equipment, or similar manufacturing environments.\n Familiarity with welding quality requirements and applicable welding standards.\n Experience with industrial coating systems, including surface preparation and two-part epoxy wet paint.\n Experience with production planning, labor forecasting, and departmental performance metrics.\n Familiarity with Microsoft Office applications and ERP/MRP systems.\n Experience implementing Lean Manufacturing or continuous improvement initiatives.\n\nBenefits\n\n Medical, dental, vision, HSA, term life, AD&D, STD, LTD\n 100% medical premium paid by Panelmatic for employee-only coverage\n 80% Panelmatic-paid / 20% employee-paid dependent coverage\n 401(k) contributions matched 100% up to 4%\n Scholarships, educational reimbursement, paid volunteerism, and professional development\n PTO and paid holidays\n Career advancement opportunities\n Competitive wages\n Family-friendly environment with average employee tenure above five years

Job Description REV Renewables, an LS Power company, is a leading developer, owner, and operator of renewable energy and energy storage projects across North America. With over 2.9 GW of operating assets and a robust development pipeline—REV is at the forefront of the clean energy transition. Our mission is to deliver affordable, reliable, and clean electric power to all. Through a commitment to innovation, REV continuously adapts to the evolving regulatory, environmental, and market landscape to deliver optimized energy solutions. Learn more at https://www.revrenewables.com. Job Summary: REV’s Energy Management team is responsible for the commercial optimization of a fleet of storage and renewable assets in wholesale power markets, primarily PJM, CAISO, and ISONE. Active management of the term position and dispatch returns value and experience to the development pipeline. Energy Management Systems is a front-office platform function that provides a dependable platform for traders to build analytical and position management applications and for management to extract reports. We are seeking a manager to assume ownership of the Energy Management Systems platform. This is a hybrid leadership / individual-contributor role that involves architecture, data engineering, systems operation, and training. The role keeps the system coherent, correct, and compliant, balancing speed with good friction, and providing resources and patterns to enable users to build what they need when they need it. Cross functional collaboration is key, in order to ensure consistent coding standards and infrastructure across the group. In addition to the platform responsibilities, the role owns the trade capture, valuation, settlements, and position management foundation. These components provide stable reporting that captures trading and dispatch activities. The platform and logic are built primarily in-house using open source tooling. This front-office role in Houston supports a small, energy and technology-savvy trading team. Your users range from no-code and low-code users on dashboards and Excel plug-ins through to quantitative analysts and developers building full-featured applications. You will inherit a production system and be accountable for its daily operations, durability, security, refinement, and future growth. Duties/Responsibilities: Leadership & People Management • Lead, mentor, and direct the Quant and Systems Developer: set priorities, own the development backlog, provide technical direction and performance feedback, and ensure the developer’s work aligns with platform architecture and controls standards., • Support all platform users — from no-code dashboard consumers to quantitative developers — through hands-on 1-on-1 sessions; act as a knowledge hub to unblock work, share best practices, and raise the collective technical bar. Hands-On Technical Contribution • Own the integrity of the ETRM platform and remain an active individual contributor: personally design, build, and maintain core components including trade capture, position management, valuation, and risk analytics — setting the technical standard by example, not delegation alone., • Own the core python libraries and platform architecture; define and steward the guardrails, patterns, and standards that let users and AI agents build freely and safely while keeping the maintenance burden low., • Review and approve all production-bound code changes, including those from the Quant and Systems Developer; validate logic, test coverage, and documentation before merge to main., • Maintain and evolve software development best practices — merge controls, code review, testing, and documentation — and react decisively to production issues, code fixes, and ad-hoc priorities as they arise. Governance, Security & Compliance • Serve as the accountable owner for system governance: define and enforce change management, access provisioning, data classification, and audit-trail requirements in alignment with IT security policies, SOC controls, and any applicable NERC/FERC obligations., • Mature the platform’s security and authorization model to enable granular access workflows and activity monitoring; enforce segregation-of-duties across all user types and environments., • Own incident response and business continuity: triage production issues alongside the developer, maintain runbooks, communicate proactively to trading and management stakeholders during outages or data integrity events, and drive continuous improvement to reduce off-hours support needs., • Act as the primary liaison between the front office (trading, structuring, analytics, quant) and IT; lead the cloud and infrastructure resource planning process by scoping, sizing, and approving compute, storage, and network requirements for the ETRM in partnership with IT. Reporting & Analytics Integrity • Establish and maintain transparent, automated information flows for portfolio position, dispatch analytics, and hedge reporting; ensure all pipelines produce outputs that are accurate, timely, and auditable by trading, risk, and finance. Required Education/Skills/Knowledge: • Bachelor of Science degree in Engineering or Computer Science, • 10+ years of relevant experience, with demonstrated hands-on ownership of core platform and ETRM components and a genuine appreciation for quality control, controls, and compliance., • Strong quantitative developer background: proficiency in Python; experience manipulating and persisting time series data with dataframe libraries and columnar storage; data modeling and API development., • Demonstrated ownership of production systems; working knowledge of security principles, segregation-of-duties, and access controls in an energy trading context., • Earns trust across a wide spectrum of technical and non-technical stakeholders; strong communicator who can translate between front-office needs and IT/infrastructure teams., • Ownership mentality, intellectual curiosity, and entrepreneurial drive; comfortable operating as both a manager and an individual contributor in a lean, high-expectations environment., • Preferred: machine learning experience; Kubernetes/cloud-native DevOps (EKS, Helm, Docker); broad US power market and energy trading-product knowledge, power analytical capabilities. Technology Platform The ETRM and analytical systems that you will inherit are built in-house by you and your team and by traders and analysts.. You will inherit this stack and will be required to maintain it and engage users through any changes you recommend: Technical and business logic defined as follows: • data model and relationships: python, • business rules by users: python, pandas, polars, internal utilities, • interfaces to external data and applications: python, selenium, sftp, https, • interfaces to internal data users and applications: fast api, python, streamlit, • orchestration of data pipelines: dagster, • front end application UIs, dashboards, and queries: streamlit, powerbi Our logic and infrastructure are managed, deployed, and persisted as follows: • source control with git third-party git host / actions, • environment specification with docker, • cloud deployment and scaling with kubernetes, helm, EKS, • windows deployment with WSL and/or conda, • data primarily in aws s3 with low-level query optimization across deployments If you would like to stand out as having read this document to the end, please include the characters “rev-em-systems” anywhere in the document that you submit. Physical Requirements/Working Conditions: • Must be able to sit/stand at a desk, using a computer workstation., • The employee is occasionally required to climb, balance, stoop, kneel, crouch, reach with hands and arms, walk; lift push or pull objects up to 20 pounds., • Must be able to handle long periods of screen time and typing., • Must be able to have effective time management skills, with the ability to concentrate for long periods of time. Why Join REV Renewables? At REV Renewables, we’re not just transforming the energy landscape—we’re building a workplace where people thrive. Our mission is to accelerate the decarbonization of the electricity supply while ensuring affordability, reliability, and resilience. We do this by empowering our team with purpose, support, and opportunity. Our Core Values • Integrity First – We uphold the highest ethical standards in everything we do., • Teamwork – We foster a collaborative, inclusive, and fun work culture., • Ownership Mindset – We take accountability and act in the long-term interest of our stakeholders., • Thought Leadership – We are creative, purposeful, and diligent in our decision-making., • Making a Difference – We strive to positively impact our communities, employees, and society at large. What We Offer REV is proud to provide a comprehensive and competitive benefits package designed to support employees’ well-being and long-term success. Below are just a few examples: • Employer-sponsored Medical, Dental, and Vision coverage for employees and their eligible dependents., • Health Reimbursement Arrangement (HRA) and Flexible Spending Accounts (FSA)., • Company-paid Life, AD&D, and Long-Term Disability Insurance., • 401(k) with employer contributions., • Generous Time Away policies., • Educational Reimbursement for professional development. We believe in creating a workplace where every employee feels valued, supported, and inspired to grow. Join us in shaping a cleaner, more sustainable energy future. REV Renewables is proud to be an Equal Employment Opportunity Employer. We are committed to fostering a workplace rooted in mutual respect, where all applicants and employees are valued and supported. Employment decisions are made without regard to race, color, religion, sex, pregnancy, national origin, age, physical or mental disability, marital status, sexual orientation, gender identity or expression, genetic information, military or veteran status, or any other characteristic protected by applicable law. Disclaimer to Agencies: Please be advised we do not accept third-party resumes unless previously agreed to by Human Resources and the Agency.

Job Description JOB SUMMARY: This role will perform a variety of mechanical operations / tasks on turbomachinery components and assemblies to ensure compliance with specifications and quality requirements. We also have flexibility to train the right mechanically inclined candidate for this role. ESSENTIAL FUNCTIONS: Maintain a safe working environment and a commitment to safety excellence. Responsible for understanding and complying with the safety policy, procedures, and instructions. Assemble components in accordance with procedures, drawings, work instructions, and specifications. Perform precision balancing on components and rotating assemblies to specified requirements. Use calipers, gauges, micrometers & other measuring tools to determine the condition of components and assemblies. Assemble various configurations of components to corresponding assembly prints utilizing available tooling, gauging and equipment. Generate inspection reports as required and assist with documenting quality issues and solutions. Maintaining a clean and organized work area. Ability to understand assembly and manufacturing prints. Other projects and responsibilities may be added at the company’s discretion. JOB REQUIREMENTS AND QUALIFICATIONS: Knowledge and/or Skill Requirements: Safety Conscience Ability to work in a team environment. Ability and willingness to work overtime, weekends and holidays, as required. Ability and willingness to work in an environment of constant pushing, pulling, lifting, stretching, bending and other physical activities. Ability and willingness to be in the shop environment a minimum of 8 hours per day, primarily standing and sitting, as required. Ability and willingness to work around and use large propane / acetylene torches. Ability to operate small lifts, pallet jacks and other lifting equipment (training will be provided on our specific equipment, but basic skills are required beforehand). Basic oral and written communication skills. Basic computer and math skills. Patience, attention to detail, and willingness to learn. Education: Highschool Diploma or equivalent from an accredited school or institution. Previous Experience: At least two years of experience working in an industrial or machine shop setting preferred. Minimum of two years of experience with component assembly and dynamic balancing. OTHER INFORMATION: Physical Requirements: While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift. Ability and willingness to lift objects weighing up to 30 lbs., walk, climb, reach, kneel, crawl, and balance. Must be able to use hands for assembly and tool usage. Must not have allergies or issues related to handling metals including aluminum, copper, bronze, and steel. Work Environment: While performing the duties of this position, the employee will be regularly exposed to moving mechanical parts. While the work area may be described as generally clean, safe, and "not loud", there will be machining operations that generate moderate noise and metal particles. Equal Opportunity Statement: Flexicrew Technical Services is an Equal Opportunity Employer; employment with FTS is governed on the basis of merit, competence, and qualifications. Employment or consideration will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

At a Glance Company: Meta Tech Industries Location: Houston, TX (On-site) Job Type: Full-Time Pay Range: $26 – $35 per hour (DOE) Shift: Day Shift Overtime: Available Experience Level: Mid to Senior Work Authorization: U.S. Citizens or Permanent Residents only --- Why This Role Exists Meta Tech Industries is continuing to grow and is adding another experienced CNC Mill Machinist to support increasing work across aerospace, defense, oil & gas, and other high-precision industries. This position is ideal for a machinist who enjoys taking ownership of the entire machining process—from setup through finished part—and thrives in a fast-paced, high-mix job shop environment. --- What You'll Be Doing In this role, you will: • Set up and operate Haas CNC milling machines, • Edit CNC programs at the machine as required, • Machine precision components from engineering drawings, • Select tooling, establish workholding, and set offsets, • Produce low-volume prototype and production parts, • Hold tight tolerances while maintaining high quality standards, • Perform first-piece and in-process inspections, • Use precision measuring equipment to verify finished parts, • Calculate dimensions and tolerances using machining math, • Troubleshoot machining issues and optimize production, • Perform routine machine maintenance and keep work areas clean and organized --- Machines, Controls & Equipment You'll work with equipment such as: CNC Milling • Haas VF-4SS (5-Axis), • Haas VF-4SS (4-Axis), • Haas VF-3SS, • Haas DM-2, • DMG Mori DMU50 (5-Axis) Controls • Haas CNC Controls Inspection Equipment • Calipers, • Micrometers, • Indicators, • Precision measuring equipment, • Zeiss CMM and Keyence inspection systems (shop-wide) --- Materials You'll Work With • Aluminum, • Stainless Steel, • Alloy Steels, • Titanium, • Inconel, • Other exotic alloys --- What We're Looking ForRequired • Previous CNC milling experience in a precision job shop, • Ability to independently perform machine setups, • Experience editing CNC programs at the machine, • Ability to read and interpret engineering drawings, • Strong understanding of tooling, fixtures, feeds, and speeds, • Experience using precision inspection equipment, • Strong machining math skills, • Self-motivated with the ability to work with minimal supervision, • Detail-oriented with a commitment to producing quality parts Preferred • Experience with Haas machining centers, • Experience machining aerospace, defense, or oil & gas components, • Multi-axis machining experience, • Prototype machining experience --- Why Machinists Like Working Here Meta Tech offers experienced machinists an opportunity to work on challenging, precision parts—not repetitive production work. You'll enjoy: • Climate-controlled, clean facility, • Modern CNC equipment, • Prototype and tight-tolerance machining, • Diverse customer base across multiple industries, • Stable workload with long-term opportunities, • Overtime availability, • Performance bonus opportunities, • A shop where skilled machinists are trusted to work independently --- Pay, Benefits & SchedulePay $26 – $35 per hour (based on experience) Additional Compensation • Overtime opportunities, • Bonus opportunities Benefits • Medical Insurance, • Dental Insurance, • Vision Insurance, • Health Savings Account (HSA), • Flexible Spending Account (FSA), • Life Insurance, • Paid Time Off, • 401(k), • 401(k) Company Match, • Retirement Plan Schedule • Full-Time, • Day Shift, • Overtime available --- About Meta Tech Industries Founded in 2014, Meta Tech Industries is a Houston-based precision CNC machine shop specializing in complex, tight-tolerance components for the aerospace, defense, oil & gas, and other demanding industries. The shop focuses primarily on high-mix, low-volume prototype and short-run production work using modern CNC equipment in a clean, climate-controlled environment. If you're looking for a shop where you'll be challenged, trusted, and given the opportunity to work on a wide variety of precision parts, Meta Tech is the place to grow your machining career. --- Apply Interested CNC Mill Machinists can apply directly through hireCNC. Apply today to join one of Houston's growing precision machining shops.

Job Description BKV Corporation (NYSE: BKV) is a forward-thinking, growth-driven energy company building the future of low-carbon energy and reliable baseload power. Headquartered in Denver, Colorado, we are the largest natural gas producer by gross operated volume in the Barnett Shale — and we’re just getting started. At BKV, we don’t just operate assets — we build integrated solutions. Our end-to-end, closed-loop energy platform spans upstream production, midstream infrastructure, natural gas-fired power generation, and carbon capture, utilization, and storage (CCUS). This differentiated model allows us to solve our customers’ toughest energy challenges while meeting growing power demand and advancing a carbon-neutral future. But what truly sets us apart is our people. We are a fast-paced, high-performance team of go-getters who thrive on challenge and think beyond convention. We push the envelope on innovation, continuously optimizing and scaling our platform to drive sustainable growth and long-term, risk-adjusted shareholder value. If you’re energized by big goals, bold ideas, and the opportunity to build something transformational, you’ll feel right at home here. At BKV, you won’t just contribute — you’ll lead, create, and shape the future of energy. Learn more at www.bkv.com. The Retail Power Portfolio Analyst III supports BKV Energy’s Go-To-Market (GTM) organization by developing, maintaining, and enhancing analytical tools that inform pricing, acquisition, retention, and risk management decisions for Residential and Small Commercial customers. This role is responsible for delivering timely and accurate retail Cost of Goods Sold (COGS) insights, portfolio performance analysis, and financial projections to support daily operations and strategic initiatives. Working closely with Portfolio Management, Risk, and Commercial teams, the Analyst translates complex data into actionable insights. The role also contributes analytical support for emerging opportunities, including mergers and acquisitions, as needed. This position operates under close supervision, requires strong analytical judgment, and emphasizes accuracy, accountability, and collaboration while upholding BKV’s values and culture. Demonstrates integrity, accountability and transparency; upholds BKV standards, values and culture. Responsibilities • Support recurring daily, weekly, and monthly operational and analytical deliverables, including retail COGS reporting for Residential and Non-Commercial segments, daily cash‑month P&L estimates, and weekly risk management reports., • Manage, validate, and analyze large and complex datasets from multiple internal and external sources to produce accurate, timely, and actionable insights., • Develop, enhance, and maintain analytical models and tools to support portfolio performance monitoring, pricing decisions, and short‑term risk mitigation., • Actively reconcile expected versus actual costs and volumes, identify drivers of variances, and communicate findings to relevant stakeholders., • Analyze weather, demand, supply, and regulatory or policy conditions to support seasonal hedging strategies and portfolio recommendations., • Support day-ahead (DART) bidding strategy in coordination with the Trading function, applying ERCOT market fluency, including post-RTC+B market design, to inform short-term positioning., • Contribute to the ongoing development and refinement of the team's short-term (ST) decision support tooling used for pricing and risk positioning decisions., • Partner with internal BKV teams to translate complex quantitative analysis into clear business insights and recommendations., • Prepare and deliver clear, concise presentations and reporting materials tailored to a variety of stakeholder audience., • Ensure data accuracy, documentation, and process discipline while continuously identifying opportunities to improve efficiency and analytical rigor., • Provide analytical support for special projects and emerging initiatives, including but not limited to new products, customer growth strategies, and potential M&A activity. Required Skills • Understanding of power, market trends, emerging issues and regulatory requirement., • Proven proficiency using Excel, Power BI, Python, and/ or SQL., • Excellent analytical and quantitative skills., • Effective communication skills to collaborate with various internal teams and stakeholders., • Ability to thrive in a dynamic fast-paced environment., • Ability to work independently and as part of a team., • Demonstrated attention to detail, organization, and prioritization skills., • Demonstrated cognitive and problem-solving skills., • Growth mindset with a demonstrated ability to innovate, embrace change and have grit. Education & Experience • Bachelor's degree in economics, finance, mathematics, statistics, data science or related fields., • 3+ years of relevant experience within the wholesale or deregulated electricity industry., • Working knowledge of ERCOT market design and rules, including changes introduced under RTC+B. Preferred • Experience fetching, analyzing, and providing actionable insights from ISO data; ERCOT experience preferred., • Experience contributing to, improving short-term decision support tools, or bidding workflows. Physical Demands and Working Conditions Location • This position is based out of the BKV Office in Houston Texas. This role may work a hybrid schedule (3 days in office/2 days remote)., • Occasional travel (up to 20%) may be required. Working Conditions • Primarily office-based with standard business hours; extended hours may be required depending on business needs. May occasionally be exposed to distracting noise while sharing office space with others. Physical Demands • Ability to sit for extended periods of time., • Ability to operate a computer, telephone, and other office equipment., • Ability to occasionally lift, carry, push, or pull up to 25 pounds., • Ability to communicate effectively, both verbally and in writing. #LI-Hybrid

Job Description This job is posted on behalf of Talent Guide USA by Top Echelon. 1st Shift Die Cutter Operator / Lead Operator – Folding Cartons $28–$40+ per hour | Overtime | Excellent Benefits | Paid Training | Relocation Assistance A growing folding carton manufacturer is expanding its operations in the area and adding experienced Die Cutter Operators, Lead Operators, and Supervisor-level talent to its 1st shift team. This is an excellent opportunity for an experienced Die Cutter Operator—or a strong Assistant Operator ready to move up—to join a progressive, technology-driven company investing in modern equipment, automation, employee training, and continued expansion. Why Consider This Opportunity? • $28–$40+ per hour, depending on experience, • Overtime opportunities, • 1st shift, • Outstanding company benefits, • Paid technical training, • Regular performance and compensation reviews, • Advancement opportunities for strong performers, • Opportunities to move into Lead and Supervisor positions, • Relocation assistance available for qualified candidates, • Modern, highly automated converting equipment, • Stable company with low employee turnover, • Strong team-oriented culture, • Company trains, develops, and promotes from withinThe Position Reporting to the Production Manager, the Die Cutter Operator will set up and operate high-speed die-cutting equipment used to manufacture printed folding cartons and paperboard packaging. The operation utilizes modern converting technology and is looking for people who understand how to produce quality cartons while maintaining strong productivity, accuracy, and safety. Responsibilities include: • Setting up and operating high-speed flatbed die cutters, • Completing machine setups, changeovers, and make-readies, • Installing and setting cutting dies and tooling, • Setting stripping and blanking sections, • Adjusting feeders, registration, pressure, and delivery systems, • Producing folding cartons to customer specifications, • Performing cutting, creasing, scoring, perforating, stripping, and blanking, • Monitoring registration and cut/crease quality throughout production, • Troubleshooting machine, tooling, and material issues, • Minimizing waste and downtime while maintaining production speeds, • Inspecting finished work for quality, • Performing routine preventative maintenance, • Maintaining a clean, organized, and safe work environment, • Working closely with Press, Folder Gluer, Quality, and Production teamsExperience We're Looking For Candidates should have 1–2+ years of die-cutting experience, preferably within folding cartons, paperboard packaging, or a similar converting operation. Experience with equipment such as: Bobst Expertcut | Bobst Novacut | Bobst Visioncut | Heidelberg Dymatrix | Koenig & Bauer/Iberica | Brausse | Young Shin | Similar Flatbed Die Cutters Bobst Expertcut experience is especially attractive, but you do not need experience on the company's exact machine. If you understand die cutter setups, cutting dies, creasing, stripping, blanking, registration, paperboard substrates, quality control, and basic machine troubleshooting, the company is willing to train you on its specific equipment and processes. Ready to Move Up? Experienced Die Cutter Assistants are encouraged to apply. If you've been assisting with setups and production and are ready to become a primary operator, this company offers the paid training and advancement opportunities to help you get there. The company is also interested in experienced Lead Die Cutter Operators, Converting Leads, and Production/Finishing Supervisors who may be ready for their next opportunity. The company is expanding, and that growth is creating opportunities for people who want more than another machine operator position. Strong performers can advance into Lead, Supervisor, and other production leadership roles as the operation continues to grow. If you're an experienced die-cutting professional looking for better pay, modern Bobst-style technology, excellent benefits, paid training, and a company where you can continue to advance, we'd like to hear from you.

Job Description Summary: We are seeking a skilled multi-crafted Maintenance Technician with strong electrical, mechanical, and pneumatic troubleshooting experience to support the maintenance and reliability of industrial equipment. This role is responsible for preventive maintenance, equipment repairs, troubleshooting system failures, and supporting tooling and rigging activities in a manufacturing environment. Key Responsibilities: • Troubleshoot, repair, and maintain industrial equipment, electrical systems, controls, and PLCs., • Perform preventive and corrective maintenance on production and support equipment., • Diagnose mechanical issues, vibration-related problems, and equipment failures., • Replace fittings, components, and worn parts as needed to maintain equipment performance., • Support tooling setup, equipment alignment, balancing activities, and rigging operations., • Utilize precision measuring instruments to verify dimensions and tolerances to thousandths of an inch., • Assist with the maintenance and operation of grinding and balancing equipment., • Read and interpret electrical schematics, mechanical drawings, and technical documentation., • Maintain a safe work environment and follow all company safety procedures. Qualifications: • Strong experience in industrial electrical maintenance, controls, and PLC troubleshooting., • Working knowledge of mechanical systems, pneumatics, and equipment maintenance., • Experience troubleshooting vibration issues and rotating equipment., • Hands-on experience with shafts, balancing equipment, and precision alignment practices., • Familiarity with industrial grinders, including Danobat grinding equipment, preferred., • Ability to use micrometers, calipers, dial indicators, and other precision measuring tools., • Experience with preventative maintenance programs and equipment reliability initiatives., • Willingness to learn, develop additional skills, and contribute to a team-oriented environment., • Rigging and tooling experience preferred. Preferred Experience: • Rotating equipment maintenance, • Shaft repair and balancing, • Precision machining or grinding operations, • Manufacturing, power generation, or heavy industrial environments\nCompany Description With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.

Job Description Job Title: CNC Machinist / Operator Company: Superior Threaded Products (STP) Location: Houston / Humble, TX (East Houston / Beltway 8) Job Type: Full-Time + OT (40-50 hours) Pay & Benefits: Competitive Pay + 90-day probation for benefits About the Role: Superior Threaded Products is adding reliable CNC Machinists and Operators to support ongoing production runs in our Humble facility. What You’ll Do: • Set up and operate CNC machines/lathes to produce precision parts., • Read shop blueprints and job drawings., • Inspect finished parts using calipers, micrometers, and depth gauges to maintain quality standards. What We’re Looking For: • 2+ years of CNC machining or operator experience in manufacturing., • Experience with G-code, machine offsets, and tooling inspection., • Strong mechanical aptitude, reliability, and solid work ethic.\nCompany Description At Superior Threaded Products, we are committed to adopting a manufacturing and service culture of unrivaled Total Quality. Our team of dedicated employees and suppliers are aligned with a common focus of meeting or exceeding customer expectations, both internally and externally. We are confident in our ability to continuously improve in everything we do and strive to set the benchmark for excellence in our industry. At Superior Threaded Products, we are committed to adopting a manufacturing and service culture of unrivaled Total Quality. Our team of dedicated employees and suppliers are aligned with a common focus of meeting or exceeding customer expectations, both internally and externally. We are confident in our ability to continuously improve in everything we do and strive to set the benchmark for excellence in our industry.

Job DescriptionDescription:Position Overview A well-established manufacturer and distributor of pipe fittings and components is seeking a CNC Machinist to join its production team in Houston, TX. The ideal candidate will bring precision, efficiency, and a strong understanding of CNC machinery to help deliver high-quality industrial products used across the energy, petrochemical, and construction sectors. This is a 2nd Shift only opportunity Key Responsibilities • We are looking for LOD VTL operators to run 3 machine cells, • Set up and operate CNC lathes and mills to machine components to exact specifications., • Interpret technical drawings, blueprints, and work orders to determine tooling and setup requirements., • Load and verify CNC programs; adjust speeds and feeds to optimize quality and productivity., • Inspect finished parts using precision measuring instruments (calipers, micrometers, thread gauges)., • Conduct in-process checks and make minor program edits or tool offsets as needed., • Monitor equipment performance, conduct routine maintenance, and report issues to maintenance or supervision., • Maintain a clean and safe work environment in compliance with OSHA standards and internal safety protocols. Preferred Skills • Experience in the pipe fitting or industrial hardware sector., • Background working with oil & gas or heavy industrial products., • Comfortable working with tight tolerances and quality assurance processes. Requirements:Required Qualifications • Must be able to set up and indicate on manual tables 30” NPS flanges., • Must be willing to work 2nd shift (4pm-1am Monday-Friday) with possibility of overtime., • High school diploma or GED required; trade school or machining certificate preferred., • Minimum 2–3 years of experience operating CNC machines in a manufacturing environment., • Proficiency in reading engineering drawings and using inspection tools., • Familiarity with machining stainless steel, carbon steel, and alloys is a plus., • Knowledge of G-code/M-code programming and CNC control systems (e.g., Fanuc, Haas) preferred., • Ability to work independently, solve problems, and ensure part quality with minimal supervision.

Job Description Position Specifications Position Title: CNC Machinist (Level I, II, III, and Lead) Reports to: Shop Foreman Status: Hourly Department: CNC About The Colt Group: Founded in 1981, The Colt Group (Colt) is a national provider of on-line industrial leak repair solutions, offering design, engineering, manufacturing, and installation to clients operating highly utilized, mission-critical industrial process plants. Summary/Objective: Four levels of CNC Machinist are classified at Colt; Level I, Level II, Level III and Lead. Each classification should have reliability and adaptability to perform the job duties described below. Ideal candidates will have basic math skills, strong oral communications, and seek a position that provides steady employment and growth opportunities. The CNC Machinist must be able to work in high-demand and fast paced environments. Essential Functions and Responsibilities: • Basic knowledge of operating a CNC mill or lathe, • Ability to read a ruler and calipers, • Ability to meet on-time scheduling of products in a fast paced enverionment, • Provide assistance to other machinists when production demands are high, • Adheres to established procedures to ensure compliance with quality standards, • Responsible for compliance with safety and housekeeping requirements, • Facilitates and promotes company policy and the company Quality Improvement program within all department work groups, • Work overtime and weekends as requested along with perform other duties as assigned, • Perform standard machinist duties such as: setup of machine, grind and deburr parts before and after machining, change tooling and operate tool probe, check fluid levels, and clean work area, • Understands basic math, • CNC Machinist level II: all of the above plus:, • Ability to make programs using Mazatrol, • Ability to edit posted programs as needed, • Practical knowledge of how a CNC machine operates, • Perform machine setups with little instruction, • Ability to operate different CNC machines, • Perform routine maintenance on the CNC machine, • CNC Machinist level III: all of the above plus:, • Ability to perform complex setups with no instruction, • Ability to identify potential problems before they happen, • Excellent knowledge of how a CNC machine operates and the ability to repair issues with them as needed, • Lead Machinist: all of the above plus:, • Ability to operate and program Mazak mills and lathes as wells as Citizen Swiss machine, • Excellent time management and problem-solving skills, • Adhere to quality and safety standards, • Optimize workflow and operational efficiency, • Ensure all equipment and machinery are properly operated and maintained, • Supervise and train staff, • Ability to diagnose technical machine issues, • Monitor inventory levels and replenish supplies as needed Skills/Knowledge/Abilities: • Excellent problem solving skills, • Familiar with operating a CNC machine, • Familiar with quality and safety standards, • Familiar with CNC tooling, • Computer literate with experience using e-mail, • Ability to understand and apply workplace safety procedures, • Practical knowledge of manufacturing processes and equipment required, • Ability to lift 40 pounds, • Ability to sit, stand, bend, reach, kneel, twist, pull, push, grip, and climb, • May be exposed to excessive noise and fumes Colt is an equal opportunity employer and considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Colt is a dynamic organization. Accordingly, the responsibilities associated with this job will change from time to time in accordance with Colt’s business needs. More specifically, the incumbent may be required to perform additional and/or different responsibilities from those set forth above.

Job Description North Shore Steel & Affiliates are trusted, industry-leading metals service centers with more than 65 years of experience supporting customers across the Gulf Coast and nationwide. With locations in Houston and Beaumont, we provide a full range of structural steel products and value-added processing services, cutting, machining, forming, rolling, and fabrication, helping customers across construction, energy, industrial, and OEM sectors move faster and build with confidence. Our legacy is rooted in reliability, craftsmanship, and long-term relationships. At North Shore Steel, our Core Values guide how we work and lead: Be Safe Always, Provide Great Service, Do the Right Thing, Take the Initiative, and Maximize Your Potential. If these values resonate with you and you’re looking for a place where you can contribute, grow, and be part of a team that supports one another, we invite you to join our team. Position Summary The Quickmill Operator is responsible for setting up, operating, troubleshooting, and optimizing a Quickmill CNC machining center used to manufacture high-precision components from high-value materials. This position verifies program accuracy, identifies machining and programming issues, and partners with the CAD Department to ensure first-time quality. The Quickmill Operator serves as the machining expert on the shop floor by protecting valuable customer materials, maintaining exceptional quality standards, promoting a strong safety culture, and supporting the success of the production team. Primary Responsibilities Machine Operation & Technical Expertise • Set up, operate, and optimize the Quickmill CNC machining center to produce precision components that meet customer specifications., • Verify machine setup, tooling, workholding, fixturing, and CNC programs prior to production and troubleshoot machining or programming issues in partnership with the CAD Department., • Monitor machining operations, adjust machine offsets, and recommend improvements that enhance quality, efficiency, and tooling performance., • Perform routine machine inspections, preventive maintenance, and maintain equipment in safe working condition. Quality & Material Stewardship • Read and interpret engineering drawings, blueprints, GD&T requirements, and customer specifications., • Perform first-piece, in-process, and final inspections using precision measuring equipment., • Machine high-value materials with exceptional attention to detail while minimizing scrap, protecting customer assets, and ensuring first-pass quality., • Accurately complete required production and quality documentation and immediately communicate quality concerns. Safety & Team Leadership • Lead by example by promoting safe work practices and ensuring the safe operation of machining and material handling equipment., • Stop work and communicate concerns whenever safety, quality, or customer materials are at risk., • Serve as a technical resource by mentoring teammates and collaborating with CAD, Quality, and Operations to improve machining processes., • Support department goals related to safety, quality, productivity, continuous improvement, and on-time delivery., • Perform other duties as assigned. Qualifications • Technical machining certification, apprenticeship, or equivalent experience preferred., • Five or more years of advanced CNC machining experience, preferably operating large-format machining centers., • Experience operating Quickmill or similar bridge/gantry CNC machines preferred., • Experience machining high-value, tight-tolerance components for aerospace or similar industries preferred., • Strong understanding of CNC machining principles, tooling, machine offsets, cutter compensation, feeds, speeds, and workholding techniques., • Demonstrated ability to troubleshoot machining processes and collaborate with the CAD Department to resolve programming and manufacturing challenges., • Ability to read and interpret engineering drawings, blueprints, GD&T, and customer specifications., • Proficient with precision measuring equipment including micrometers, calipers, indicators, height gauges, and bore gauges., • Strong mechanical aptitude, analytical thinking, problem-solving, and communication skills., • Experience operating overhead cranes and forklifts preferred. Success in this role requires sound judgment, technical expertise, exceptional attention to detail, and a commitment to leading by example in safety, quality, and continuous improvement while consistently delivering first-pass quality. Physical Requirements: • Ability to lift up to 50 lbs independently on a routine basis and handle materials safely as part of daily job duties., • Ability to stand for extended periods and maintain safe body positioning while performing tasks and moving through the work area, including walking on concrete floors and uneven surfaces., • Frequent squatting, bending, stooping, reaching, pushing, pulling, and lifting, requiring full-body mobility, balance, and upper- and lower-body strength to perform work safely., • Manual agility to operate tools safely and effectively, with regular use of arms, shoulders, and back for lifting, reaching, and positioning tasks., • Ability to work safely in a warehouse environment with exposure to noise, dust, moving equipment, and varying temperatures., • Maintain adequate visual and auditory acuity to safely perform assigned tasks, including but not limited to: identifying potential hazards, reading and/or recording measurements, inspecting materials, and responding promptly to verbal instructions, alarms or hand signals in the work environment Pre-Employment Requirements: All candidates who receive a conditional offer of employment must complete the company’s pre-employment screening process. This includes: • Criminal background check: reviewed in accordance with job duties, the nature and gravity of any convictions, and the time elapsed since the offense or sentence completion., • Pre-hire drug screening: candidates must pass a drug screen to be eligible for hire., • Physical assessment: required for all Production and Distribution positions, conducted by a company-designated physician at no cost to the candidate. Participation in each step of the pre-employment process is required. Candidates who choose not to participate or who do not meet the screening criteria will not be eligible for employment. Benefits: At North Shore Steel, we invest in the well-being of our team. Full-time employees receive a full benefits package that includes multiple Major Medical plan options, Dental, Vision, Voluntary Life, Short-Term Disability, Flexible Spending Accounts, and HSA options for qualifying plans. We also provide Long-Term Disability, Basic Life, and AD&D coverage at no cost to you. You’ll also enjoy our competitive holiday schedule, PTO program, and a Safe Harbor 401(k) with company contributions to support your long-term financial goals. We are an equal opportunity employer and maintain a safe, secure, and drug-free workplace where everyone has the opportunity to succeed. #ZR

Job Description We are looking for a Senior DataOps/Data Platform Administrator to manage and maintain our hybrid data ecosystem. This is a hands-on role focused on the stability, performance, and day-to-day operations of both our on-premises and cloud-based data tools. You will be the primary gatekeeper of our data infrastructure, ensuring that our systems —from Source to Delivery—are available, performant, and secure. Your goal is to manage the environment so effectively that our data engineers can focus entirely on building data products within a stable, secure framework. Primary Responsibilities On-Premises Administration (Denodo and SQL Server) • System Maintenance: Execute regular upgrades, patching, and configuration of VDP servers to ensure environment stability., • Operational Health: Monitor system uptime and manage environment-specific settings across Dev, QA, and Production., • Performance Tuning: Manage caching and resource allocation to maintain optimal query speeds for the business., • Troubleshooting: Act as the Tier 3 point of escalation for any data connectivity or performance issues. Cloud Platform Administration (Snowflake & Databricks) • Access Control: Day-to-day management of Role-Based Access Control (RBAC), user provisioning, and security integrations., • Cost Management: Monitor Snowflake credit usage and Databricks consumption; manage resource monitors and alerting to prevent budget overages., • Service Maintenance: Oversee the operational health of cloud services. Orchestration & Transformation Support (Astro/Airflow, Fivetran and dbt Cloud) • Environment Management: Manage deployments for Astro/Airflow, ensuring environment variables and secrets are correctly configured and updated., • Job Oversight: Monitor dbt Cloud job runs, manage environment configurations, and troubleshoot integration issues between dbt and Snowflake., • CI/CD Maintenance: Maintain existing CI/CD pipelines to ensure code moves from development to production without manual intervention. Platform Reliability & Guardrails • Operational Standards: Maintain the "guardrails"—security policies, naming conventions, and deployment standards—that keep the platform organized., • Documentation: Keep system documentation, environment diagrams, and administrative procedures up to date., • Support: Ensure the data engineering team has the necessary permissions and stable environments required to meet their delivery timelines. Technical Profile • Experience: 5+ years in a Systems Admin, Database Admin (DBA), or DataOps role., • Denodo Admin: Practical experience managing on-prem Denodo with a focus on data delivery and performance tuning., • Cloud Admin: Strong administrative background in Snowflake (managing warehouses, roles, and usage) and familiarity with Databricks., • Tooling: Proficient in dbt Cloud, Fivetran, and Airflow., • Skills: Strong understanding of SQL, Git/DevOps, and basic CI/CD pipeline maintenance. Why This Role? This is a critical "Specialist" position. You will own the health of a sophisticated, high-growth data stack. If you enjoy the challenge of managing a hybrid environment and take pride in building highly available, "bulletproof" systems, this is the role for you. SM Energy offers competitive compensation and benefits programs which include, but are not limited to, variable pay, health care coverage, retirement plan, protection coverage, time off and leave programs, training and development opportunities and a range of allowances connected to specific work situations. Details are available at Careers :: SM Energy Company (SM) (sm-energy.com). Applications will be accepted on an ongoing basis until the position is filled.

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic is seeking a detail-oriented and experienced Supplier Quality Engineer. The Supplier Quality Engineer (SQE) is responsible for ensuring that external suppliers deliver components, materials, and assemblies that meet quality, safety, and performance standards. This role will cover raw material, fabrication and metal manufacturing products and focus on supplier selection and approval, audits, re-evaluation, continuous quality improvement, and root-cause corrective actions. Job Duties: • Selection, evaluation, approval and ongoing performance evaluation of suppliers., • Conduct QMS and technical supplier audits and assessments to ensure compliance with quality management systems and applicable industry standards., • Lead root cause analysis and corrective action activities for supplier-related nonconformances., • Review and disposition non-conforming materials received from suppliers., • Review and approve supplier quality documentation, inspection plans, and manufacturing processes., • Support incoming inspection activities and disposition of nonconforming materials., • Review and approve supplier-requested changes to processes, materials, or tooling., • Collaborate with engineering and sourcing teams during new product introductions and supplier selection., • Track supplier quality metrics and drive continuous improvement projects., • Ensure compliance with customer specifications, industry standards, and regulatory requirements., • Participate in supplier development initiatives to improve quality, delivery, and reliability. Requirements Minimum Qualifications: • Bachelor’s degree in mechanical, industrial engineering or related technical field., • 5+ years of experience in quality engineering, with at least 3 years in supplier quality., • Experience conducting supplier audits and root cause investigations., • Familiarity with quality tools such as FMEA, 8D, Root Cause Analysis, and Six Sigma methodologies., • Proficient in reading technical drawings and using measurement/testing equipment., • Experience with ISO-9001 quality management systems (QMS)., • Computer literate and experience working with ERP systems., • Excellent problem-solving, communication, and analytical skills., • Ability to pass physical, drug, driving, and background check required., • Alignment with company core values required. Benefits • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid for by Panelmatic for the employee-only level medical coverage, • 80% paid for by Panelmatic and 20% paid for by the employee on all other level medical coverage (i.e. employee plus child, employee plus spouse, family), • 401K and bonus, • Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided, • PTO and paid holidays provided, • Career advancement opportunities, • Competitive wages, • Family-friendly environment with average employee tenure above five years