Offres recording engineer à GlasgowCréer des alertes d'emploi

Description Job Description The Security Enterprise Solutions (SES) Operation is the cornerstone of Leidos’ comprehensive suite of fully integrated security solutions for aviation, ports, borders, and critical infrastructure customers around the world. With our new, combined portfolio, our operation has more than 24,000 products deployed across 120 countries. Leveraging this portfolio, our core technical strengths, and robust R&D initiatives, we are positioned to address emerging and evolving threats through rapid development of innovative solutions for our global customers. SES is comprised of three divisions to align with our customers’ missions and needs: • Aviation Solutions, • Ports & Borders, • Global Services Summary The Installation Integration Engineer must be a self-starter who is team oriented and focused on delivering the highest level of service excellence to Leidos customers. Responsible for providing effective, efficient, and compliant on-site technical and customer support for installation of systems at assigned airports, as determined by Leidos needs. Will install, commission, diagnose, troubleshoot, repair, and test a variety of complex X-ray or CT based electronic and electromechanical equipment, which may include computer and networking systems. Many of the systems are integrated into a larger airport systems environment including complex baggage handling systems. System types include the following but not limited to: • Check point CT systems., • Checkpoint x-ray systems., • Explosive Detection Systems (EDS), • Automatic tray return systems (ATRS), • Explosive trace detection systems (ETD), • Millimeter wave technology passenger screening (MMW). Will follow standard protocol, procedures and identified best practices to isolate and resolve problems in malfunctioning equipment or software. The position requires the ability to work independently with limited supervision. Successful applicants will have a certified trade training, with stong experience in troubleshooting and repair of; x-ray computed tomography systems, electro - mechanical equipment, PLC control systems. Please note that a 5-year UK reference period is required to obtain airside passes. Primary Responsibilities: • Responsible for providing technical and customer support for installation projects., • Install, maintain, troubleshoot/diagnose, repair, and test a wide variety of airport passenger and baggage security systems., • Perform scheduled and unscheduled Corrective Maintenance, Preventive Maintenance, and radiation surveys., • Maintain calibration on all test and radiation survey equipment., • Provide customer training assistance of installed systems and equipment., • Adhere to Leidos published maintenance and radiation survey checklists and procedures., • Report design, reliability, and system bugs to technical support., • Follow down machine escalation protocol to ensure time resolution of system failures., • Prepare RMA repairable/returnable parts for shipment and return to identified defective location. Complete all RMA paperwork and reporting requirements., • Exercise judgment within broadly defined policies and procedures in selecting methods, techniques, and evaluation criterion for obtaining results., • Assume responsibility for continued customer satisfaction and coordinate all activities with the customer; assist with customer training while representing Leidos in a professional manner., • Must be highly proficient in reporting activities, maintaining local spare parts inventory, recording travel expenses and timecard, implementing Tech Bulletins (TB’s) and using good judgment when dealing with customers., • Comply with all safety requirements and all required training, following the guidance provided in Leidos policies, procedures, manuals, and TB’s., • Comply with use of Personal Protective Equipment (PPE) where and when applicable., • Apply Lock Out – Tag Out (LOTO), following safe lifting practices and same day reporting of any accidents, near misses and unsafe conditions., • Demonstrates a pro-active approach towards safety, health, and quality in compliance with all customer facility and Leidos company guidelines and regulations., • Maintain tools and test equipment properly., • Participate in on-going product training and maintain all necessary certifications., • Provides daily written reporting on completed maintenance activities, used parts and consumables, machine faults, down times, and availability., • Responds to faults timely as per contracted response, repair times and endeavors best efforts to keep KPIs, and SLAs of the contract., • Keeps track of used parts as per procedures provides by Service Supervisor, returns the parts with RMA process., • Reports performance and availability of the machines as advised by Service Supervisor, • Identifies the Root Cause of repetitive parts failures and investigates for corrective actions to minimize parts consumption., • Solid relevant Installation Integration Engineer experience, preferably in an integrated systems technologies environment., • Experience maintaining and supporting large, complex, electromechanical systems., • Experience working with High-Voltage Equipment., • Good customer skills and the ability to work under pressure., • Must be self-starter, work well without supervision, and accept responsibility., • Must be adaptable and willing to accept changing shifts and job requirements determined by business and customer needs., • Must be able to travel both domestic and international locations., • Must be willing to work on-call and off-shift as assigned and requested by manager or supervisor., • Maintain professional appearance as prescribed by the Company., • Must work well without supervision and accept responsibility for timely completion of assigned work., • The candidate must be able to lift/carry a minimum of 25 kgs., • The candidate must be able to push/pull 90kgs.bs, • Must be able to work and freely navigate in the baggage area of the airport, where vertical ladders, crossovers, and low overhead ceilings frequently occur., • A degree in electronics technology, mechanical or electrical engineering or equivalent., • Prior experience in X-ray or computed tomography technologies, especially in the airport security environment, is a significant plus., • Working knowledge of Linux and Unix. At Leidos we are PASSIONATE about customer success, UNITED as a team and INSPIRED to make a difference. We offer meaningful and engaging careers, a collaborative culture, and support for your career goals, all while nurturing a healthy work-life balance. We provide an employment package that attracts, develops, and retains only the best in talent. Our reward scheme includes: • Contributory Pension Scheme, • Private Medical Insurance, • Generous Annual Leave (including public and privilege holidays) If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. £44,700.00-£57,300.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

An exciting opportunity has arisen for a Systems Engineer in our Fire & Security Systems team based in the Glasgow area, to cover the surrounding territory. The job holder will be required to work 40hrs per week. About G4S F&S - G4S Fire & Security Systems (UK) is part of G4S Secure Solutions (UK), the UK’s largest private provider of security solutions. G4S Fire & Security Systems (UK) is the leading integrator of fire and security solutions with a fully accredited 24 x 7 monitoring centre for fire, security and location-based services, protecting everything from small offices and schools to large multi-national organisations and high security Government facilities. Main Responsibilities • Attend to calls for maintenance (on site and or by telephone) as directed by team co-ordinators, • Rectify all faults on the first visit where rectification is within your control., • Carry out rolling programme of preventative maintenance visits., • Collection/recording of site configuration information., • Maintain accurate and timely records., • Provide cover on an out of hour’s basis on a rotating basis., • Commission small projects when required., • Ensure that audits are carried out of quality procedures., • Provide training to customers and colleagues as required., • Carry out any additional tasks that may be required. About you • Previous experience installing & servicing a wide product base of access control systems, CCTV systems and intruder alarm systems., • Experience of installing and servicing fire alarm systems, ideally GENT based., • An IT qualification and or Electrical/Electronic qualification, • A broad technical IT knowledge, i.e. Installing various Windows Operating Systems; networking etc, • Knowledge of basic electrical principals such as measuring voltage and current drain, • Good attention to detail in order to ensure that all paperwork is correctly completed, and procedures are followed within the allotted timescales., • An enthusiastic team player who is able to work well under pressure and maintain a professional approach at all times., • Comfortable working irregular hours and being on a 24/7 call rota In return we offer • Competitive Salary up to £35,000 DOE, • Company Car, • 25 days holiday, • Pension/Life assurance

Role: Electrical Maintenance Team Leader DAYS ONLY Salary: £48,000 - £52,000 per annum plus benefits - weekly paid with the opportunity of overtime Hours: Monday - Thursday: 08.00-17.00 Friday 08.00-16.30 Location: Commutable from Stockport, Manchester, Oldham, Rochdale, Wilmslow, Stretford and surrounding areas Company A heavy plant manufacturing company who offers challenging and rewarding careers to Engineers, are looking for a Team Leader, electrically trained, who wants to be part of an established, loyal and successful team. Great shift pattern working days only, with a great salary and opportunity for someone who is interested in carrying some responsibility. They also offer opportunities to take on further training and complete qualifications as you grow and progress in the role and company. Responsibilities As a Team Leader you will be ensuring safe working, producing Risk Assessments and Safe Systems of Work, acting as the site Authorised Person for the issuing and control of Permitted activities and assisting in the management of the ongoing engineering maintenance activities. From troubleshooting to planned preventive maintenance (PPM), you will be hands-on with specialist machinery, ensuring everything runs like clockwork. It's a dynamic role where problem-solving skills and technical expertise are used daily, and you will be a key player contributing to the efficiency and reliability of our production processes. • Working with the Engineering Planner to maximise the use of available resources, • Ensuring that there are all necessary parts, tools and materials needed for work tasks, • Managing onsite engineering contractor activities, • Co-ordination of Statutory Electrical requirements such as Inspection and Testing, Portable Appliance Testing, Fire Alarms and Emergency Lighting., • Maintaining a good standard of housekeeping throughout the workshops., • Carry out electrical installation, maintenance, fault finding and repairs to power and control systems, plant and equipment., • Provide support and resource where needed for Project works., • Carry out inspections and audits, giving advice, feedback and support on both engineering quality and safety standards., • Promote Lean thinking and actively look for ways to improve efficiencies., • Identify future training needs and carry out training for Engineers, • Promote continuous improvement of energy efficiency, • You will be an electrically biased engineer supervisor/team leader, with experience of working in a manufacturing/factory environment, with a minimum level 3 qualification in an Electrical Engineering discipline., • Experienced with controls and automation with Siemens PLCs including maintenance, programming and diagnostics, • Strong leadership, communication and motivational skills, • Good exposure to health & safety standards, • Good working knowledge of EHS We will endeavour to get back to all applicants but if you have not heard back within 5 working days unfortunately your application has been unsuccessful. JBRP1_UKTJ

About The Role Job Title: Field Service Engineer - Dartford Division: Wastekit Purpose of Role Service Engineers are responsible for servicing and maintaining recycling equipment on a reactive and scheduled basis. They will work towards achieving their own targets as well as customer SLAs. Service level agreements are agreed and set with our customers and must be achieved. Service Engineers will work closely with the Service Planning Supervisor, Technical Manager and Operations Director to ensure an efficient and safe delivery. Customer Service • To liaise with the call controllers and Field Service Supervisors to provide the best service to the customers., • The engineer is expected to help plan their daily work to maximize customer service, achieve the highest standards and productivity using electronic and verbal communications as appropriate., • The engineer should always try and take ownership of engineering issues so that the customer is provided with good service., • Engineers are expected to achieve targets set by their Field Service Supervisor and be aware of all customer service level agreements and aim to adhere to them always., • Maintain confidentiality and discretion always., • Carry out any reasonable task deemed necessary., • May be required to work out of area during periods of varying workload volumes and during engineer shortages which can require overnight stays., • Always carry your ID and any Health and Safety accreditation (cards) when at work.Records and Documentation, • To accurately and clearly complete all paperwork and electronic data as required by Wastekit or the customer according to the company procedures., • Accurately record time, parts used and any other details either electronically or manually as required., • Prompt action should be taken to ensure replacement parts are acquired to replenish van stock or parts specially ordered to return to a breakdown being mindful of any customer SLAs., • Pass on any new business leads to sales department.Skills/Knowledge and Qualifications Required, • Shall have good fault-finding and diagnostic skills, • To be able to understand hydraulic and electrical circuit diagrams., • Will be able to show and apply sound knowledge of mechanical, electrical and hydraulic principles, • Can use and understand various electrical and hydraulic test equipment, • Be aware of the Companys procedures and adhere to them always., • To pass on any technical knowledge that may help other engineers., • Use good engineering practice and standards always., • Update engineering knowledge when able., • Always use cost effective but safe measures to carry out tasks., • Can work with the minimum of supervision., • To attend meetings and training courses as required by your Field Service Supervisor.Standards, • Comply with all requirements in the Work Instruction for Engineer Responsibilities., • Comply with instructions given by Field Service Supervisors, Managers and Directors., • To maintain and use company issued equipment and vehicles in a safe manner and according to PHS Group policies., • To take responsibility for the safe keeping of stock and be accountable for stock balances., • To keep accurate records (using stock usage sheets and or electronic recording as appropriate) of when and where the stock is used., • Ensure correct uniform is worn and kept in clean condition and always use PPE when it is required., • Any documentation which is required to be returned to the office is done so in time., • Vans should be kept clean, tidy and maintained as per MFM-02 Commercial Vehicle Transport Policy and appropriate care taken of PPE, tools and stock.Desirable Knowledge and Qualifications, • Ideally from a service engineering, electrical or hydraulic background with an ability to demonstrate the skill of fault finding and repair., • City & Guilds in electrical and mechanical engineering., • Competent in the use of electrical and hydraulic test equipment., • A sound knowledge of single and three phase electrical equipment and hydraulic circuits., • A mature disciplined approach and good personal administrative and customer care skills., • 17th edition electrical regulations/City & Guilds electrical and mechanical engineering. JBRP1_UKTJ

Our client, a leading national communications company, is looking to recruit a self-motivated, professional, and efficient Lead AV Engineer to supporting their client base and ensure that a first-class service is delivered. Reporting to the Technical Director duties will include: • Attending client sites and resolving issues in a timely and neat manner., • Communicating with clients., • Self-motivated with a commitment to the issue at hand., • Using problem solving skills to find faults and consistently provide high standard solutions., • Delivering end users training after installation of new devices, • Accurately completing job reports, explaining steps taken, and getting sign-off by the client, • Accurately completing other service records, • Building relationships with clients, • Identifying sales opportunities with existing clients and feeding back to the Sales team, • Conducting and recording site surveys to a high standard, • Maintaining standards of technical excellence within the team, • Participating in various training and development As a successful candidate ideally, you will have at least 2 years previous experience within a professional audio, video, video conferencing or similar technical role with the ability to install, configure equipment using software tools and able to terminate cables to industry standard. Be self-motivated, reliable, possess excellent communication, analytical and interpersonal skills together with the capacity to plan and manage your own workload efficiently. As this is a field-based role a current driving licence is essential. In return the company offers an excellent salary and overtime pay, flexible working hours, 25 days holiday, bonus together with the training and support to aid career progression within an innovative and dynamic company. The company also provide a company van, laptop, phone and necessary tools/equipment. JBRP1_UKTJ

Areas: Bournemouth, Southampton and Salisbury Hours: Days Monday to Friday Salary Band: 32-34K Additional: Company Van, I Pad and Tools Our Client has a full time, permanent opportunity to join their team of dedicated service engineers and sales representatives in offering a wide range of equipment and services to their customers. MAIN RESPONSIBILITIES Carry out planned and preventative maintenance, LOLER inspections, and other service activities on the Companies range of products as well as on competitors products covered by the Companies contracts. You will be required to follow logical and systematic steps to test equipment and diagnose any potential or existing faults while working in a Safe and Cost-effective manner. Recommend repairs and improvements to the customer and provide quotations on prospective work such as replacement of wear and tear parts to avoid breakdowns between service visits and upgrades to improve the functionality of the equipment. Work in close cooperation with the sales force so that potential sales opportunities and leads outside of your scope can be captured and managed internally. To develop full knowledge of the Companies products. Responsible to maintain the company vehicle, its stock, and tools as well as your company phone, tablet/laptop in good working order. Responsible for accurate timesheet reporting, correctly detailing job numbers, recording travel time, tagging and labelling equipment, etc. Provide out-of-hours cover on a call-out rota. CANDIDATE PROFILE You are responsible, reliable, punctual, and trustworthy You are experienced in following Health and Safety guidelines and are experienced in making appropriate Risk Assessments and you ensure that you work safely. Strong customer focus; passionate about customers and the service you provide as a Company Engineer. Results orientated, you aim to carry out work to a high standard within the allocated time and costs. You are diligent and have keen attention to detail. Your work is precise, and your documentation is detailed and accurately records the required information. Eager to learn and develop new skills both in technical and commercial-related matters. Trained and experienced in carrying out LOLER tests on or similar equipment is essential. Able and willing to stay away overnight to cover more remote work to maximise time on site and reduce travel time in own area and when working in other engineers areas. Formal education in Electrical, Mechanical, and/or Hydraulic Engineering is preferred although a full company induction and training will be provided. Able to work on your own, managing your time and workload accordingly. This is a great opportunity to join a company who are part of a larger group and are leaders in their Industry. At NMC Recruitment we review all applications and will be in touch with Candidates showing the required experience. We may store your information on our database for future opportunities JBRP1_UKTJ

About BAM Building a sustainable tomorrow. Thats our mission and our promise at BAM. Its how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe. We strive to create an environment where everybody feels welcome and valued. Were on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics. Building a sustainable tomorrow We are seeking a Senior Design Engineer to join the BAM UK & Ireland Temporary Works Centre of Expertise. The Temporary Works Centre of Expertise provides design and technical support to the whole of BAM UK & Ireland, so our work covers a wide range of engineering applications. We are a diverse and well-established team with a strong focus on personal development and supporting progression towards professional qualifications. This role can be based at our Farnborough, London, or Birmingham office with a flexible/hybrid working schedule. Your team • This role can be based at our Farnborough, London, or Birmingham office with a flexible/hybrid working schedule.Making Possible, • Represent the Temporary Works CoE at internal and external meetings., • Liaise with project, bid, and divisional teams to clarify and manage design requirements., • Act as Lead Designer when appointed, serving as the main point of contact on specific projects or bids., • Supervise and support team members, ensuring high performance and adherence to professional and procedural standards., • Conduct Performance & Development Reviews, provide feedback, and identify development opportunities., • Plan and undertake site visits as needed to support design accuracy and feasibility., • Ensure accurate time recording and cost recovery for all chargeable design work., • Manage the preparation and review of conceptual and detailed designs, ensuring compliance with current standards, risk assessments, and drawing requirements., • Preparing/supervising the development of detailed designs following current standards and codes, including calculations, design risk assessments and sufficiently detailed sketches for the preparation of 3D models and working drawings., • Review design work from internal staff and external contributors, maintaining quality and consistency., • Maintain up-to-date records in the design task database and support pricing by summarising relevant quantities., • Drive continuous improvement through process enhancements, professional development, and delivery of training, including graduate tutorials.What do you bring to the role?, • Proven experience and expertise in civil engineering design for structures commonly required by BAM UK&I, which may include earthworks, earth retaining structures, foundations, structural steelwork, reinforced concrete, timber and formwork/falsework., • Proven experience in construction methods and processes., • Degree in Civil Engineering or a related subject., • Experience and knowledge of digital construction processes., • Construction site/project experience., • Knowledge of modern methods of construction (e.g. DfMA etc.)., • Experience in training and coaching.Whats in it for you?, • Competitive salary, • A wide range of family-friendly policies, • Company car/car allowance/travel allowance, • 8 % matched pension contributions, • Private healthcare, • Life assurance, • 26 days holiday, • 2 wellbeing days, • 1 volunteering day JBRP1_UKTJ

About The Role Job Title: Baler and Compactor Field Service Engineer Division: phs Wastekit Croydon Purpose of Role Service Engineers are responsible for servicing and maintaining recycling equipment on a reactive and scheduled basis. They will work towards achieving their own targets as well as customer SLAs. Service level agreements are agreed and set with our customers and must be achieved. Service Engineers will work closely with the Service Planning Supervisor, Technical Manager and Operations Director to ensure an efficient and safe delivery. Customer Service • To liaise with the call controllers and Field Service Supervisors to provide the best service to the customers., • The engineer is expected to help plan their daily work to maximize customer service, achieve the highest standards and productivity using electronic and verbal communications as appropriate., • The engineer should always try and take ownership of engineering issues so that the customer is provided with good service., • Engineers are expected to achieve targets set by their Field Service Supervisor and be aware of all customer service level agreements and aim to adhere to them always., • May be required to work out of area during periods of varying workload volumes and during engineer shortages which can require overnight stays.Records and Documentation, • To complete all paperwork and electronic data as required by Wastekit or the customer according to the company procedures., • Accurately record time, parts used and any other details either electronically or manually as required., • Prompt action should be taken to ensure replacement parts are acquired to replenish van stock or parts specially ordered to return to a breakdown being mindful of any customer SLAs., • Pass on any new business leads to sales department.Skills/Knowledge and Qualifications Required, • Shall have good fault-finding and diagnostic skills, • To be able to understand hydraulic and electrical circuit diagrams., • Will be able to show and apply sound knowledge of mechanical, electrical and hydraulic principles, • Can use and understand various electrical and hydraulic test equipment, • Update engineering knowledge when able., • Always use cost effective but safe measures to carry out tasks., • Can work with the minimum of supervision., • To attend meetings and training courses as required by your Field ServiceStandards, • Comply with all requirements in the Work Instruction for Engineer Responsibilities., • Comply with instructions given by Field Service Supervisors, Managers and Directors., • To maintain and use company issued equipment and vehicles in a safe manner and according to PHS Group policies., • To take responsibility for the safe keeping of stock and be accountable for stock balances., • To keep accurate records (using stock usage sheets and or electronic recording as appropriate) of when and where the stock is used., • Any documentation which is required to be returned to the office is done so in time., • Vans should be kept clean, tidy and maintained as per MFM-02 Commercial Vehicle Transport Policy and appropriate care taken of PPE, tools and stock.Desirable Knowledge and Qualifications, • Ideally from a service engineering, electrical or hydraulic background with an ability to demonstrate the skill of fault finding and repair., • City & Guilds in electrical and mechanical engineering., • Competent in the use of electrical and hydraulic test equipment., • A sound knowledge of single and three phase electrical equipment and hydraulic circuits., • A mature disciplined approach and good personal administrative and customer care skills., • 17th edition electrical regulations/City & Guilds electrical and mechanical engineering.In return for your commitment and expertise, you will receive, • A competitive salary of £40.000.00 OTE £45,000.00, • We offer accredited ILM Training in house and external training., • Ongoing career and development opportunities., • Digital GP for you and your family., • Over £1000 worth of savings and discounts at Supermarkets and High Street stores with PHS Perks., • Company pension., • 24-hour wellbeing helpline. JBRP1_UKTJ

A leading utilities company is looking for a Wastewater Engineer to review and assess proposed designs, ensuring they meet standards.Responsibilities include providing practical solutions, recording feedback, and acting as a technical escalation point.The ideal candidate should have wastewater exper

Building a sustainable tomorrow What if it brought more purpose, more growth, more balance – and more time for what really matters? BAM is where you can do your best work on projects that improve people’s lives. And it's also where you’ll find the freedom to grow, the support to thrive, and the chance to shape your career on your terms. BAM UK & Ireland is recruiting a Gate Person to join our construction segment and to be based in Glasgow. The role is working 7.30am - 4.30pm Monday to Thursday and 7.30am - 3.30pm on Fridays out of Chryston High School. Making Possible • Control vehicles accessing and exiting the site. • Direction on site to correct offloading point • Complying with traffic management plan • Operating the traffic management plan • Control of moving vehicles and plant on site. • Reporting to the site management team on site. • Pre booking deliveries and recording onto delivery boards. • Monitor gate access. • Restrict access to pedestrians/visitors to site. • Ensure all visitors sign in and out of site. • Take control of delivery tickets and issue to BAM Management. • PPE will be provided. Your team Working out of Chryston High School you will join an expanding team and you will be working 7.30am - 4.30pm Monday to Thursday and 7.30am - 3.30pm on Fridays. What’s in it for you? The hourly rate is £14.69 per hour and you will be working in a challenging and continuously changing environment in a forward thinking organisation. In addition we support further personal growth and development. BAM operates a flexible working policy. What do you bring to the role? • Must hold a valid Traffic Marshal/Banksman ticket and a right to work in the UK. • Previous experience as a Traffic Marshal/Banksman essential • Must be reliable and hard working. About BAM Building a sustainable tomorrow. That’s our mission and our promise at BAM. It’s how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe. We strive to create an environment where everybody feels welcome and valued. We’re on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics. The application process BAM is committed to ensuring a fully inclusive recruitment and onboarding process, so if at any time you feel you may need any reasonable adjustments, do not hesitate to speak with one of our team, and we will do our best to support you. "Join us in Making Possible

A technology company in the UK is looking for a skilled software engineer to develop APIs and deploy AI models for voice assistants. The ideal candidate will have over 3 years of experience in software engineering, strong Python skills, and a solid understanding of RESTful APIs.

We are looking for engineers with the following skills and attributes:. Ability to provide engineer level documentation.

The role reports to the Senior Mobile Engineer and collaborates with Mobile, Fixed, Transmission, and IP teams, as well as the Security Architect and Product teams. Monitor, perform configuration, upgrades, and patches for Mobile core network elements (MME, SGW, PGW, PCRF, HSS, HLR, SBC, CS Core, an

The Voice Engineer ensures the overall operability of the NiCE voice network. Knowledge of call recording technologies (e.

A leading software company in the United Kingdom is seeking an experienced Voice Engineer to manage the voice network infrastructure.