Trabajos supply manager en PortsmouthCrear alertas

As a Supplier Quality Engineer, you will be responsible for assuring the quality of products and services supplied by external suppliers, ensuring full compliance with organisational, customer, and regulatory requirements. You will drive supplier quality performance through effective quality management processes, audits, supplier development activities, and cross‑functional collaboration. This is a pivotal role in protecting the integrity of the supply chain and ensuring that end products consistently meet the high standards expected by customers and stakeholders, particularly within a regulated defence environment. The role requires significant travel across the UK (approximately 60%). While it reports to the Operational Quality Manager based at the Portsmouth site, the position could also be suited to an individual located in the North of the UK to better support travel requirements. Key Responsibilities 1. Supplier Quality Management • Develop, implement, and maintain supplier quality management systems and processes., • Establish and communicate supplier quality standards, specifications, and quality plans., • Ensure supplier compliance with contractual, regulatory, and organisational requirements. 1. Supplier Evaluation and Selection • Evaluate and support the selection of suppliers based on quality, cost, delivery, and service performance., • Conduct supplier capability assessments and approval activities., • Manage material quality for Stainless Steel, Aluminium, and Carbon Steel supply chains. 1. Audits & Inspections • Plan and conduct supplier audits and manufacturing process assessments., • Perform product and process inspections including dimensional, trial, final, and FAIR inspections., • Identify, document, and manage non‑conformances, driving effective corrective and preventive actions. 1. Supplier Development • Work in partnership with suppliers to improve quality performance and capability., • Provide technical guidance, quality support, and training where required., • Support continuous improvement initiatives across the supply base. 1. Quality Metrics & Reporting • Monitor, analyse, and report supplier quality performance (e.g. defect rates, on‑time delivery)., • Prepare quality performance reports for internal stakeholders and senior management., • Use data‑driven insight to identify trends and improvement opportunities. 1. Collaboration & Communication • Work closely with Procurement, Engineering, Production, and Operations teams., • Clearly communicate quality expectations, requirements, and feedback to suppliers., • Act as the quality escalation point for supplier‑related issues. 1. Continuous Improvement • Identify opportunities to improve supplier quality processes, systems, and performance., • Stay current with industry best practice, standards, and regulatory developments. Education & Qualifications, • Degree in Engineering, Quality Management, or a related discipline or equivalent apprenticeship qualification - CSWIP 3.0 / 3.1 / 3.2 to BS EN ISO 17637 Skills, Knowledge and Expertise • Substantial experience in Supplier Quality Engineering or a closely related role, • Proven experience working within the defence sector, • Strong understanding of defence regulatory requirements, including:, • DEFSTAN, DEFCON, QASOR Technical Skills & Knowledge • Quality Management Systems: ISO 9001, AS9100, AS9102, • Supplier auditing, assessments, and corrective action management, • Visual welding inspection, NDT, VT, • PCN Level 1 and/or AWS certification, • Creation and interpretation of ITPs, MITPs, QCPs, • Experience with Stainless Steel, Aluminium, and Carbon Steel fabrications, • Ability to read and interpret 3D models, DWF, STEP files, and PDFs, • Proficiency in quality tools and systems (e.g. Minitab, SAP QM), • Familiarity with ERP and MRP systems Certifications (Desirable) AS9100 / ISO 9001 Lead Auditor Six Sigma or other recognised quality improvement certifications Skills and Attributes • High attention to detail and accuracy, • Strong analytical and problem‑solving capability, • Confident, clear communicator with strong interpersonal and influencing skills, • Assertive, resilient, and adaptable to change, • Highly organised with the ability to manage multiple priorities, • Collaborative team player who actively contributes and coaches others when required, • Commercially aware with an understanding of how quality performance impacts production and customer fulfilment, • Committed to health, safety, environmental compliance, and continuous improvement, • Welcomes and promotes diversity and inclusion Travel Requirements UK‑based role with regular supplier visits Approximately 60% travel / 40% office based Other Requirements • Candidates must have an existing right to live and work in the UK, • Candidates must have passed UK security clearance to the Security Check level or be able to obtain this level. To gain SC clearance will normally require a candidate to have been resident in the UK for a minimum of 5 years. Benefits Along with competitive salaries, CMS2 offers a great benefits package that includes life insurance, a generous leave allowance and more.

An FM provider are hiring a Project Manager to deliver billable work programmes to commercial sites. Your new company Our client are a specialist facilities service provider who deliver services to a commercial portfolio spanning the UK. They are hiring a Project Manager to join their team to drive the delivery of billable work project programmes across a number of sites in Hampshire, based from Fareham. Your new role As Project Manager, you will be responsible for driving projects to completion, assessing and mitigating risks, and ensuring successful execution. You will oversee the delivery of Billable Works in compliance with government regulations, statutory requirements, and health and safety policies. You will manage and monitor Supply Chain teams, ensuring qualified professionals are assigned to tasks that meet safety, quality, and performance standards. Reviewing Risk Assessments and Method Statements will be a key responsibility to maintain high safety and compliance levels. Collaboration will be central to your role. You will work closely with client representatives, local customer service teams, and site managers to agree on project scope, priorities, and timelines. Progressing tasks end-to-end through the Maximo system and ensuring timely completion of project documentation, including SharePoint uploads, will be part of your day-to-day responsibilities. Your role will also involve supporting end users and management in providing effective solutions to customer requirements, with a particular focus on supporting the client’s carbon reduction targets. You will play a key role in resolving customer issues and ensuring complaints are addressed in a timely and satisfactory manner. You will be responsible for managing project costs, ensuring stakeholder expectations are met through sound commercial decisions, and maintaining value for money. Collaborating with all stakeholders, you will help mitigate contract risks and ensure work plans and budgets align with operational needs. What you'll need to succeed To succeed in this role, you will require demonstrable experience in project management delivering construction, refurbishment and engineering works. You will also require: • HND or equivalent in building/civil engineering, Electrical/Mechanical Engineering, or similar, • APM, RICS, MCIOB or similar, • Asbestos RP, Legionella RP, or AP training desirable, however not essential, • Experience in project management, including leading teams, stakeholder management, cost control, and operational planning., • Experience in supervising site operations, managing work priorities, and driving performance improvements., • Demonstrable problem-solving and decision-making skills. What you'll get in return When successful in securing this role, you will receive a permanent contract with a national, specialist FM provider with an interesting client portfolio. You will also receive: • Up to £50,000 starting salary, • Company car / car allowance, • 25 days leave + bank holidays, • Private medical cover, • 6% matched pension contributions, • Life assurance 2x salary What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. # 4779270

TeamJobs are working with a well established business to recruit an experienced Bid Manager to join their growing team. £50,000 – £60,000 per annum Full Time – Permanent This is an excellent opportunity for someone with a strong background in quotations, estimating, or bid management. You will play a key role in managing the full bid and quotation process, ensuring accurate and commercially competitive submissions are delivered within customer deadlines. The Role As Bid Manager, you will be responsible for leading the quotation process from initial enquiry through to final submission. You will work closely with engineering, procurement, operations, and commercial teams to ensure all bids are technically compliant, commercially sound, and aligned with business objectives. Key responsibilities include: • Managing the full quotation and bid process from enquiry through to submission, • Coordinating workload across costing, estimating, and quotation activities, • Reviewing technical drawings, specifications, bills of materials, and customer requirements, • Producing accurate material, labour, and subcontract costing models, • Identifying commercial and operational risks within enquiries, • Supporting pricing strategies to balance competitiveness and profitability, • Ensuring customer deadlines and turnaround times are achieved, • Maintaining clear and auditable quotation records, • Driving continuous improvement across bid and estimating processes, • Providing leadership and direction across the quotations or estimating team About You We are looking for someone who has: • Previous experience in a bid management, estimating, quotations, or proposals role, • A strong understanding of material and labour costing, • The ability to interpret technical drawings and specifications, • Excellent organisational and communication skills, • Strong commercial awareness and analytical ability, • Experience coordinating workloads or leading teams, • Good working knowledge of ERP systems and Microsoft Excel Desirable Experience • Electronics, engineering, or contract manufacturing experience, • Knowledge of subcontract processes and supply chain costing, • Previous people management experience, • Experience working with OEM or regulated industry customers This is a fantastic opportunity to join a growing business where you can make a real impact within a commercially focused and collaborative environment. For more information or to apply, please contact TeamJobs today

Description Senior Environments Engineer Location: This is a Hybrid working role. Whiteley, Hampshire Clearance Required: This role will require attainment and maintenance of SC clearance. The Role: We are seeking a Senior Environments Engineer to manage and coordinate a range of test and production environments supporting a nationally significant service. You will play a key role in ensuring environments are effectively scheduled, maintained and aligned to programme priorities. Key Responsibilities: Manage and coordinate all environment activities, including scheduling, bookings and conflict resolution Lead environment planning meetings and ensure activities are prioritised effectively Work closely with technical teams, suppliers and stakeholders to support installs, maintenance and testing Monitor and assess the impact of network and infrastructure changes on environment availability Support data setup and ensure compatibility with latest builds Testing & Validation: Plan and execute Build Verification Testing (manual and automated) Validate new builds, including integration elements, prior to release to test teams Produce clear and concise test reports Support & Governance: Support user validation and shadowing sessions, troubleshooting issues as required Attend key programme and technical meetings to maintain an accurate environment schedule Raise and manage change requests to ensure activities are aligned and not impacted Support Test Readiness Reviews (TRRs) Experience managing environments, ideally as an Environment Manager/Lead or within a Test Lead role Strong understanding of networking and its impact on environments Knowledge of: Version and configuration control Remote access solutions Linux and VMware (vSphere) ITIL / ServiceNow Understanding of Air Traffic Control (ATC) or similar complex systems (desirable) About You: Highly organised with the ability to manage multiple priorities Strong understanding of the development and test lifecycle Confident communicator, able to work with technical teams, stakeholders and end users What we do for you: At Leidos we are PASSIONATE about customer success, UNITED as a team and INSPIRED to make a difference. We offer meaningful and engaging careers, a collaborative culture, and support for your career goals, all while nurturing a healthy work-life balance. We provide an employment package that attracts, develops and retains only the best in talent. Our reward scheme includes: Contributory Pension Scheme Private Medical Insurance 33 days Annual Leave (including public and privilege holidays) Access to Flexible benefits Flexi Working Commitment to Diversity: We welcome applications from every part of the community and are committed to a truly diverse and inclusive culture. We foster a sense of belonging, welcoming all perspectives and contributions, and providing equal access to opportunities and resources for everyone. If you have a disability or need any reasonable adjustments during the application and selection stages, please let us know, and we will respond in a way that best fits your needs. Who We Are: _ – we work to make the world safer, healthier, and more efficient through technology, engineering and science. Leidos is a growing company delivering innovative technology and solutions focused on safeguarding critical capabilities and transformation in frontline services, our work in the United Kingdom includes addressing some of the most complex problems in defence, healthcare, government, safety and security, and transportation. Working together as Team Leidos we are helping to transform the UK's defence supply chain by providing an integration of a complex mixture of services, at low risk, using a modern suite of systems that will deliver one version of the truth. For the first time, the MOD will see the whole picture, as it is happening. What Makes Us Different: Purpose: you can use your passion and abilities at Leidos to keep the people you care about safe. We are at the forefront of machine learning, AI, cyber security and solutions. Using your skills in the technology frontline by helping to build a safer world. You can inspire change. Collaboration: having flexibility to do your job is one of our core benefits, enabling you to become part of our extraordinary team. We have been empowering our people to work flexibly for years. Whether you work from home, the office or on customer sites, we will give you the digital tools and the flexibility to work smarter and align your needs and ours. People: Leidos empowers people from every background to be themselves and gives you the tools to learn new skills by enabling growth whilst developing. We believe that extraordinary people need opportunities to grow, to be inspired and to inspire others. At Leidos, we invest in technical academies, career rotations and a career development plans that that enhance your future. If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. £61,500.00-£78,800.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit _. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at _. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at _. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the _. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #Remote

Carrington West are assisting their local authority client based in Essex in the search for a Development Management Manager to join on a initial 6 month contract (Then rolling). You will be joining the council's planning team to support the Head of Planning and to manage a hard-working team of Principal Planners, Enforcement Officers, Land Charges Officer and Planning Technical Support staff. This role will provide support to the Head of Planning in delivering the Planning Service being responsible for all aspects of the Development Management, Planning Enforcement and Appeals, to ensure the delivery of the Development Plan and Essex 2050 (and other projects). The post holder will be accountable for the project management in respect of the Councils development management. You will be responsible for identifying and verifying benefits from the development plan and future strategic plans, projects and programmes as directed. ·Work collaboratively with the Head of Service and the Service Management Team to develop and deliver the Council's corporate vision, alongside strategic objectives leading to the delivery and implementation of an up-to-date development plan ·This role will ensure capacity to support the delivery of the development plan and other projects and programmes, in particular with regards to the Councils Growth Agenda ·The post will provide technical financial advice and guidance for the delivery of the Development Management and the Development Plan, alongside ongoing projects and programmes ·Deliver professional/managerial expertise advice with regards to the Planning aspects of programmes and projects under the remit of the Head of Service ·The post holder will lead and manage the work of Development Management and the Planning Enforcement and Appeals Teams to ensure the efficient operation of the service, in accordance with statutory and legislative requirements and the corporate objectives of the Council (including budgets). ·Responsible for ensuring consistency of decision making across the Borough in relation to all planning applications and enforcement action, in accordance with statutory requirements, the Development Plan framework, relevant corporate policies and national guidance ·To carry out negotiations with developers regarding the policy and financial aspect of developments including contractual arrangements such as quotes, financial processes and reviews to ensure development site viability, sustainability and deliverability ·Promoting the council's aims and objectives, engaging with key partners, stakeholders and staff at all levels to promote understanding of the Council's corporate objectives Experience in a similar position and knowledge and understanding of planning legislation and regulations is necessary. It would be beneficial to hold a Post-graduate degree in planning, regeneration or a related discipline, and have the eligibility for membership of RTPI. The council are looking for candidates who will be able to hit the ground running and are offering flexible working arrangements with home working provided. Carrington West Pay Rate - Approx £70per/hour (DOE) Job Ref - 66721 Please call Cameron de Wit on 02393 876014 for a confidential discussion on this role, or email myself or our planning team if you are short of time to chat: cameron.dewit@carringtonwest.com planning@carringtonwest.com Carrington West's dedicated Town Planning Recruitment Team supply clients UK wide on both a permanent and contract basis and all levels of seniority. If this role is too senior, too junior or in a location that is unsuitable, but you are keen on options, please still feel free to apply and we can discuss other, often unadvertised roles with you.

Job Title: Operations and Supply Chain ManagerLocation: RomseySalary: Up to £65000 Summary of position: A superb development opportunity for an experienced Senior Manager to work with a high precision environment. Managing a team of 4 Departmental Managers, you

Supply Chain Manager (Manufacturing / Supply Chain) £45,000 - £55,000 + Bonus + Pension + Progression + Training + Company Benefits Portsmouth Are you a Supply Chain Manager from a manufacturing background or similar, looking to join a well-established and growing business where you can take owner

Payroll Manager Senior Payroll Administrator Payroll Officer Payroll Supervisor CV Screen Ltd acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. Manage payroll processing for a portfolio of clients, ensuring accuracy and deadlines are

Wärtsilä Corporation in Havant is seeking a Supply and Demand Manager to oversee supply chain operations and logistics planning. The ideal candidate will possess a Bachelor’s degree, essential experience in supply chain management, and knowledge of ERP systems.

At the heart of this transformation is the rollout of SMART metering across our supply area – and we’re looking for a driven and detail‑oriented Smart Assistant Project Manager to help us deliver it. Working closely with the Programme Manager, you’ll play a key role in supporting project del

You will be fully responsible for managing the purchase phase of the supply chain core process and delivering hardware to projects on time, to cost and fulfilling all performance and quality requirements. You will also provide support to all aspects of the Supply Chain process for hardware and parti

Ernest Gordon Recruitment Limited is seeking a Supply Chain Manager to join their team in Portsmouth.

You will also provide support to all aspects of the Supply Chain process for hardware and participate in schedule and cost improvement initiatives within Airbus and with suppliers. Day‑to‑day contact with the supplier and management of contract implementation (multi‑project, international); ti

Stores Supervisor (Aluminium/Manufacturing) Portsmouth, England £28,000 - £32,000 + Training + Progression + Overtime + Pension Are you a Stores Person/Manager or similar with a background in the Manufacturing Industry or a related field, looking to join a well-established, highly-respected company, offering impressive technical development opportunities in addition to top-of-the-line in house and external training, leading the way in Double Glazing Products for over 30 years? Do you want to become a key member in a team of highly skilled, sector specialists, offering scalable career progression opportunities as your role develops, recognised for their top-quality service and premium workmanship in very project they undertake? On offer for the successful Stores Person/Manager or similar is the exciting opportunity to become a leading figure within a well-established, fast-growing, business, offering top-of-the-line training both in house and externally, putting both their staff and customers at the heart of everything they do. Presenting itself is the opportunity to join a company recognised for their best-in-class service as well as their top-quality workmanship, offering scalable career progression opportunities as your role develops as well as the chance to increase your earnings generously through Overtime etc In this role, the successful Stores Person/Manager or similar will be responsible for both processing orders as well as managing returns and monitoring inventory/stock flow. In addition, you will also be responsible for overseeing the goods-in and receipting process. On top of this, you will also be responsible for the monitoring of outstanding orders, chasing suppliers when necessary. Penultimately, you will be responsible for supervising and supporting a team of two within the Stores Department. Finally, you will be responsible for liaising with both the Fabrication Supervisor as well as the Production Co-ordinator to ensure all items needed are readily available. The ideal Stores Manager or similar will have previous experience in a Stock/Inventory/Operations/Warehouse Operative/Supervisor position or similar. In addition, will also have a background within the manufacturing industry. On top of this, you will have previous supervisory experience. Finally, you will have strong analytical, communicational and organisational skills. The Role: Processing orders as well as managing returns and monitoring inventory/stock flow Overseeing the goods-in and receipting process Conduct twice yearly stocktakes The Person: Previous experience in a Stores Supervisor position or similar A background within the Manufacturing Industry Strong analytical and organisational skills Reference: BBBH22927 Keywords: Aluminium, Double Glazing, Production, Manufacturing, Stock, Training, Progression, Portsmouth If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you but you are looking for a new position, please contact us for a confidential discussion on your career. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

Labourer (CSCS) Location: Havant Salary: £13.00 - £15.00 per hr (unable to pay CiS/UTR) Contract type: Temporary Duration: 5 Days (Mon-Fri) Start Date: 01/06/2026 Premier Recruitment Solutions is a specialist recruitment company working in partnership with a regional contractor. We are recruiting for CSCS Labourers to work with their existing team. You will be working as a CSCS Labourer on a project in Havant. Requirements for the CSCS Labourers job role: Valid CSCS Card Your duties as a CSCS Labourer will include: Site preparation and ensuring the construction site is kept clean and tidy by cleaning and clearing debris Loading and unloading building materials and distributing them to the correct locations Assisting with deliveries Supporting tradespeople with manual tasks Assisting the site manager with other general duties Standard Hours for the CSCS Labourers job role: Monday to Friday 07:30hrs - 17:00hrs(But sometimes you may be required to work longer for the CSCS Labourers role due to the workloads). Weekend work may be available Premier Recruitment Solutions Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. We are an equal opportunities employer and all applications will be assessed solely on merit

TeamJobs are working with a well established business to recruit an experienced Bid Manager to join their growing team. £50,000 - £60,000 per annum Full Time - Permanent This is an excellent opportunity for someone with a strong background in quotations, estimating, or bid management. You will play a key role in managing the full bid and quotation process, ensuring accurate and commercially competitive submissions are delivered within customer deadlines. The Role As Bid Manager, you will be responsible for leading the quotation process from initial enquiry through to final submission. You will work closely with engineering, procurement, operations, and commercial teams to ensure all bids are technically compliant, commercially sound, and aligned with business objectives. Key responsibilities include: Managing the full quotation and bid process from enquiry through to submission Coordinating workload across costing, estimating, and quotation activities Reviewing technical drawings, specifications, bills of materials, and customer requirements Producing accurate material, labour, and subcontract costing models Identifying commercial and operational risks within enquiries Supporting pricing strategies to balance competitiveness and profitability Ensuring customer deadlines and turnaround times are achieved Maintaining clear and auditable quotation records Driving continuous improvement across bid and estimating processes Providing leadership and direction across the quotations or estimating teamAbout You We are looking for someone who has: Previous experience in a bid management, estimating, quotations, or proposals role A strong understanding of material and labour costing The ability to interpret technical drawings and specifications Excellent organisational and communication skills Strong commercial awareness and analytical ability Experience coordinating workloads or leading teams Good working knowledge of ERP systems and Microsoft ExcelDesirable Experience Electronics, engineering, or contract manufacturing experience Knowledge of subcontract processes and supply chain costing Previous people management experience Experience working with OEM or regulated industry customersThis is a fantastic opportunity to join a growing business where you can make a real impact within a commercially focused and collaborative environment. For more information or to apply, please contact TeamJobs today COMMP

Your new company You will be joining a well-established and growing design, engineering and professional services consultancy, delivering complex projects across sectors such as infrastructure, environment, and major public-sector frameworks. The business operates across both UK and international markets, with a strong reputation for technical excellence and collaborative delivery. With continued growth, the company has recently strengthened its bid function and is now investing in a dedicated role to support the delivery of high-quality tender submissions and business development activity. Your new role As a Bid & Business Development Coordinator, you will play a key role in supporting the end-to-end bid process, working closely with the Bid Manager and wider technical teams. This is a varied and hands-on position combining bid administration, writing support, and broader business development coordination. Key responsibilities will include: Managing bid processes, including document control, tender portals, tracking deadlines and ensuring compliance Setting up and maintaining bid workspaces (Teams/SharePoint) and coordinating inputs from internal stakeholders Supporting the preparation of tender submissions, including drafting responses, formatting documents, and quality-checking content. Assisting with CVs, case studies and supporting documentation for submissions. Maintaining bid pipelines, calendars and CRM systems to ensure visibility of opportunities Providing business development support such as client research and preparation of pitch materials Supporting light marketing activity, including content updates and management of marketing collateralThis is an excellent opportunity to develop your skills across bids, proposals, and business development within a fast-paced and collaborative environment. What you'll need to succeed To be successful in this role, you will bring: Previous experience in bids, proposals, business development, marketing, or project coordination Strong organisational skills with the ability to manage multiple deadlines and large volumes of documents Excellent written English and the ability to draft clear, accurate and professional content High attention to detail with strong proofreading and quality-control abilities Confidence using Microsoft Office, Teams, and structured document systems A proactive, dependable and collaborative approach, with the confidence to engage with stakeholders at all levelsExperience within engineering, construction, or professional services environments is advantageous, but not essential. What you'll get in return In return, you will benefit from: The opportunity to work on high-profile projects within a respected consultancy Exposure to all aspects of the bid lifecycle, with clear opportunities to develop your career in bids and business development A collaborative and supportive team environment Flexible working arrangements with a blend of office and home working A varied, engaging role offering both structure and progressionWhat you need to do now If you are a highly organised and detail-driven professional looking to build or develop your career in bids and business development, we would love to hear from you. If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)

Join a Thriving Team in the Marine Industry! Are you a motivated and enthusiastic individual ready to dive into the exciting world of sales and account management? Our client, who is looking for an Account Manager to join their dynamic Sales team. This role is a fantastic opportunity for recent graduates or anyone eager to start their journey in the marine industry. You’ll play a vital role in building relationships, driving sales growth, and delivering excellent customer experiences. Your Responsibilities Account Management & Customer Engagement Build and maintain strong customer relationships across designated accounts in the UK. Serve as the point of contact for day-to-day inquiries and strategic projects. Respond proactively to customer requests via emails, calls, face-to-face visits, and end-user interactions. Schedule regular client visits and create travel itineraries as required. Conduct account reviews and resolve customer issues in collaboration with internal teams.Sales Growth & Business Development Promote sales of marine hardware products to assigned accounts. Identify new opportunities within existing relationships and expand into new business areas. Support clients with promotions, product campaigns, and merchandising. Assist in preparing quotes and specifications for marine hardware needs. Attend trade shows, exhibitions, and industry events to showcase products.Operational Excellence & Teamwork Manage orders from initial inquiry to completion. Work closely with logistics to ensure timely delivery. Handle product returns and warranty claims effectively. Ensure retail displays and branding meet company standards.Technical Development & Market Knowledge Gain in-depth knowledge of marine hardware and products. Stay updated on industry trends and competitor insights. Provide technical advice and expertise when needed.Personal & Professional Growth Continuously develop skills in negotiation, sales, and communication. Align with company values in all professional interactions. Contribute positively as part of a collaborative team environment.About You Recent graduate or ready to kickstart a career in sales. Passionate about the marine industry, with some technical knowledge. Competent in MS Office Suite (Word, Excel, PowerPoint, Outlook). Strong communicator with excellent organizational abilities. Target-driven and detail-oriented. Holds a full UK driver’s license with a willingness to travel To apply, please contact: Jo – (phone number removed) Suzie – (phone number removed) Marine Resources Recruitment Ltd acts as an employment agency for permanent and fixed term contract recruitment and as a recruitment business for the supply of contract workers. Please note that by applying for this job you accept our Terms of Use and Privacy Policy which can be found on our website

Fabrication Supervisor (UPVC/Working Supervisor) Portsmouth, England £30,000 - £40,000 + Training + Progression + Overtime + Pension Are you a Fabrication Supervisor or similar, with a background in the Windows/Manufacturing Industry or a related field, having previous working experience of UPVC Fabrication, wanting to progress into a managerial role, looking to join a well-established, highly-respected company, offering impressive technical development opportunities, leading the way in Double Glazing Products for over 30 years? Do you want to become a key member in a team of highly skilled, sector specialists, offering scalable career progression opportunities as your role develops, recognised for their top-quality service and premium workmanship in very project they undertake? On offer for the successful Fabrication Supervisor or similar is the exciting opportunity to become a leading figure within a well-established, fast-growing, business, offering top-of-the-line training both in house and externally, putting both their staff and customers at the heart of everything they do. Presenting itself is the opportunity to join a company recognised for their best-in-class service as well as their top-quality workmanship, offering scalable career progression opportunities as your role develops as well as the chance to increase your earnings generously through Overtime etc In this role the successful Fabrication Supervisor or similar will be responsible for creating and ensuring the execution of daily, weekly and monthly production schedules for employees within the fabrication team. You will also be responsible for the oversight of the Production and Fabrication process, making sure products are made within budget and delivered on time, ensuring they withhold the highest standard. This is a hands-on role, you will be expected to help with fabrication as and when needed. In addition, you will also be responsible for developing and implementing strategies to make production more cost/time effective where possible as well as the day-to-day management of the Fabrication team as well as general staff issues like holidays, absences etc... On top of this, you will be responsible for monitoring stock-levels, coordinating with the Stock Manager as and when needed. Finally, you will be responsible for machine checks and maintenance as and when needed, as well as keeping accurate technical documentation. The ideal Fabrication Supervisor or similar will have a background within the Manufacturing Industry as well as previous experience within a fabrication role, along with a desire to progress into a managerial position. On top of this, you will have previous experience in a management position, with strong leadership skills. In addition to this, you will be happy to work both as part of a team but also autonomously. Finally, you will be highly organised with strong problem-solving skills and multi-tasking abilities. The Role: Oversight of the Production/Manufacturing process Develop and implement production strategies where possible Machine checks and Maintenance The Person: A background within the Manufacturing industry Experience within UPVC Fabrication Previous experience in a management role Strong organisational and leadership skills Reference: BBBH23907 Keywords: UPVC, Fabrication, Welding, Aluminium, Double Glazing, Production, Manufacturing, Overtime, Training, Progression, Portsmouth If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you but you are looking for a new position, please contact us for a confidential discussion on your career. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

Quality Engineer (SQA) Portsmouth, Hampshire £35,000 – £42,000 (Negotiable based on Experience) Full Time, Permanent The Opportunity We’re recruiting for a Quality Project Engineer & SQA to join a precision engineering environment working on high-spec, tight-tolerance components. This is a fantastic opportunity for someone with a strong quality background in CNC/manufacturing who wants to play a key role in driving product quality, supplier performance, and continuous improvement across the business. The Role Reporting to the Quality Manager, you’ll be responsible for ensuring products meet exacting standards, often at micron-level tolerances, while supporting process improvements and supplier quality performance. You’ll work closely with production, engineering, and suppliers to drive quality from design through to final inspection. Key Responsibilities Quality & Inspection Develop quality plans, inspection methods, and work instructions Perform and oversee first article, in-process, and final inspections Utilise CMM and advanced metrology equipment to validate components Ensure compliance with ISO9001 and AS9100 standardsNon-Conformance & Improvement Manage non-conformances (NCRs) and lead root cause analysis (8D, 5 Whys) Drive CAPA activities to improve processes and reduce defects Lead continuous improvement initiatives to improve yield and reduce scrapSupplier Quality Conduct supplier audits and monitor supplier performance Ensure incoming materials meet required specifications Support supplier development and corrective actionsProcess & Data Analysis Lead Measurement Systems Analysis (MSA) and Gauge R&R studies Apply SPC and process capability techniques Support production with controlled process changesWhat We’re Looking For Experience Background in precision engineering / CNC machining environments Experience in quality engineering, inspection, or supplier quality Hands-on experience with CMMs and metrology equipmentSkills & Knowledge Strong understanding of GD&T and engineering drawings Experience with quality tools (MSA, SPC, CAPA, 8D, Lean Six Sigma) Familiarity with CAD/CAM or inspection software (e.g. Polyworks, PC-DMIS, PowerInspect) Strong analytical and problem-solving skillsQualifications HNC/HND or equivalent in Engineering (or relevant experience) ASQ CQE (desirable but not essential)Why Apply? Work in a high-precision, advanced manufacturing environment Opportunity to influence quality standards and supplier performance Be part of a business focused on continuous improvement and excellence Hands-on role with real impact across production and supply chainIf you’re interested or would like to learn more, apply now or get in touch for a confidential discussion

We are seeking a strategic and forward-thinking professional to join our client's Procurement team as an IT Category Manager. In this role, you will lead the development and execution of end-to-end category plans, identifying key initiatives to maximise commercial value and mitigate risk across the organisation. You will manage a comprehensive portfolio of technology suppliers, ensuring continuous improvement and added value throughout the entire contract life cycle. Leveraging your deep IT market insight, you will act as a primary advisor to internal stakeholders, helping to shape the future of our digital service delivery. Details: Title: Category Manager Salary: £55,000-£68,000 DOE Contract: Permanent, full-time Location: Portsmouth, hybrid working (3 days a week on site) Key responsibilities: Design and implement robust demand and category strategies, engaging with business leads to align procurement with technical requirements. Direct the full sourcing life-cycle including tenders and high-level negotiations to optimise the Total Cost of Ownership. Build and maintain high-trust, influential partnerships with senior internal stakeholders and external vendors. Manage high-impact IT category expenditure, ensuring alignment with corporate objectives and identifying areas of potential strategic risk. Support the ongoing development of procurement best practices, ensuring workflows remain modern, efficient, and effective. Partner with business leaders to achieve cost reductions through technical standardisation, demand aggregation, and tail-spend management. Ensure all sourcing initiatives strictly adhere to industry-specific regulations, statutory obligations, and data protection requirements. Integrate health, safety, and well being standards into all supplier qualification processes and sourcing strategies.What we are looking for: Essential Skills & Experience Skilled at interpreting and presenting complex commercial and contractual data to diverse audiences. Proven experience in a multi-stakeholder environment, working within multi-disciplinary teams to deliver results. Strong resolution and influencing skills with a focus on delivering high-value outcomes. Specific knowledge of IT supply chains in a similar roleDesirable Qualifications CIPS or MCIPS qualified, or possessing equivalent transferable expertise. Experience working within regulated procurement frameworks (such as UCR, PCR, or PA23). A high level of proven contractual intuition and business logic.Huntress Search Ltd acts as a Recruitment Agency in relation to all Permanent roles and as a Recruitment Business in relation to all Temporary roles. We practice a diverse and inclusive recruitment process that ensures equal opportunity for all we work with, irrespective of race, sexual orientation, mental or physical disability, age or gender. As an organisation, we encourage applications from all backgrounds and will ensure measures are met when required, to allow a fair process throughout. PLEASE NOTE: We can only consider applications from candidates who have the right to work in the UK

Portsmouth / Midlands base with travel to client sites Up to £70,000 dependant upon experience, plus car / car allowance, 33 days holiday (including bank holidays), pension, life assurance, employee assistance programme, wellbeing support, and flexible benefits including cycle to work scheme About the Role As a Business Development Manager for UPCS you will be responsible for driving strategic growth and market expansion for a Polymer and Composite component manufacturing business. This will involve the delivery of commercial targets and the implementation of robust sector strategies. You will be a proactive collaborator, have proven experience as a BD Manager, be ready for travel to customer sites, and ideally be based either Portsmouth or Midlands, UK, with opportunity for hybrid working - with time on-site and time with customers. As part of your key responsibilities youll: Lead the iterative development of sector strategies by mapping high-potential markets and emerging trends Execute the full sales lifecycle to secure new business that meets or exceeds profitability and growth targets Oversee the submission of detailed bids, tenders, and executive presentations, ensuring strict commercial and financial alignment Cultivate high-value relationships and lead the Gate to Great onboarding process to ensure long-term contract stability Partner with Marketing to deliver sector-specific messaging that articulates a clear competitive advantage Synthesise customer insights into scalable service offerings by collaborating with technical and engineering teams Ensure all growth activities remain synchronised with corporate objectives and the principles of The Unipart Way Maintain a robust opportunity pipeline while providing high-quality cross-vertical leads to support holistic company growth About You Wed love you to have the following skills and experience, but please apply if you think youd be able to perform well in this role! Industry understanding of injection moulded plastics or carbon fibre composites, with the ability to bridge the gap between engineering and commercial sales Proven track record in high-value business development, with a readiness for frequent travel between sites (Portsmouth/Midlands) Proven experience in sales within manufacturing and/or engineered materials Ability to leverage professional experience from the Automotive industry or related high-growth sectors, preferably: Aerospace, Defence, Industrial or Medical device manufacturing A history of successfully driving market penetration and securing sustainable, high-value revenue growth Expert at building executive presence and managing sophisticated relationships with diverse internal and external stakeholders Proactive mindset for identifying untapped market potential and converting emerging trends into commercial opportunities Advanced skills in securing favourable commercial terms and presenting complex value propositions to diverse audiences Expertise in creating detailed quotations and managing rigorous tender processes to ensure profitability targets are met About Unipart We are a supply chain performance improvement partner. We Design, Make, Move, and Improve components in our customers supply chains, keeping their operations and assets moving and working better, for longer. Through our commitment to continuously driving operational efficiencies, we improve performance - saving time, cost, and carbon. Our ambition is to be the driving force behind efficient, resilient, and sustainable supply chains. Equality, Diversity, and Inclusion We believe that a great workplace is one where you can bring your whole self to work. Our recruitment process is designed to be accessible, inclusive, and based entirely on merit. We define merit through a combination of technical skills and the core behaviours that help our people thrive at Unipart. We welcome applications from everyone, regardless of background or circumstances. We are committed to a policy of equal opportunity that exceeds our statutory obligations under the Equality Act 2010 and subsequent legislation. Whether its your age, disability, neurodiversity, gender identity, family status, or any other characteristic that makes you you - it is your talent and potential that we value most. Adjustments for you: We want you to perform at your best. If you require any reasonable adjustments or have specific accessibility needs at any stage of the application or interview process, please let us know. We are here to support you. You may have experience of the following: Senior Business Development Manager, Strategic Account Manager, Automotive Sector Sales Manager, Commercial Development Manager, Key Account Director, Head of Business Development (Automotive), Client Solutions Manager, Market Development Manager, Growth & Partnerships Manager, Bid and Tender Manager, Sales & Strategy Manager. REF-228 286 TPBN1_UKTJ

Lead Site Manager - Hampshire Location: Hampshire (regional projects) Salary: £55,000 - £60,000 DOE + Car Allowance + Benefits Sector: Construction | Healthcare, Education & Leisure The Opportunity We're working with a well-established Hampshire-based main contractor that delivers projects across healthcare, education, and the public sector. Much of their work involves refurbishment and working in live environments, and they have strong, long-term relationships with their clients across the South.Due to a steady pipeline of work, they're looking to bring in a Lead Site Manager to take control of projects ranging from £1m-£4m. You'll be given full responsibility on site, with the backing of an experienced and supportive senior team. This is a good opportunity to join a stable business with consistent, local work. Key Responsibilities Site Leadership - Take full control of day-to-day site operations, ensuring projects are delivered safely, on time, and to a high standard Project Delivery - Oversee schemes from inception through to completion, managing programme, resources, and subcontractors Coordination - Work closely with commercial, technical, and delivery teams to maintain progress and resolve issues efficiently Quality & Safety - Maintain high standards of workmanship and enforce strict health & safety compliance on site Stakeholder Engagement - Act as the main point of contact on-site for clients, consultants, and subcontractors, building strong working relationships What We're Looking For Proven experience as a Site Manager or Lead Site Manager within a main contracting environment Experience delivering projects in the £1m-£4m range Ideally experience within healthcare, education, or leisure sectors Hands-on approach with the ability to lead teams and manage multiple trades Excellent communication and organisational skills SMSTS, CSCS (Manager level) & First Aid essential Full UK driving licence How to Apply If you're interested in this Site Manager opportunity, please apply via the link or contact James Mitchell at the Southampton office for a confidential discussion. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)

HMS Project Manager Hybrid in Portsmouth - Must live within 30 Miles of Portsmouth - UK ONLY £450 p/d (Umbrella) Inside IR35 Start ASAP 24-Month Contract Your new company A large housing organisation is undertaking a major, organisation‑wide transformation of its Housing Management services. The programme will replace a complex estate of legacy systems with a single, modern, cloud‑hosted Housing Management System (HMS). This strategically important initiative will support services for over 15,000 households, improving compliance, data quality, and customer experience, while enabling staff to work more efficiently through modern digital tools. The project has strong organisational sponsorship and will have wide‑ranging impact across Housing, Repairs & Maintenance, Community Safety, and Corporate IT. Your new role As HMS Project Manager, you will lead the end‑to‑end delivery of a large‑scale Housing Management System transformation over an estimated 24‑month programme, starting in Summer 2026. You will be responsible for mobilisation, procurement, implementation, testing, cutover, and post‑go‑live stabilisation.You will provide leadership to a multidisciplinary delivery team including project coordination, data, business analysis, testing, and specialist resources, while acting as the key interface between housing services, IT & Digital, data, procurement, finance, governance teams, and system suppliers. The role requires ownership of programme planning, governance, budget, risk management, supplier delivery, data migration, system integration, business change, training, and transition into business‑as‑usual support. What you'll need to succeed Proven experience delivering complex housing system implementations, including large‑scale data migration from multiple legacy platforms Hands‑on experience with enterprise housing systems such as NEC Housing, Microsoft Dynamics 365, or similar HMS solutions Strong understanding of end‑to‑end landlord services, including tenancy management, allocations, repairs and maintenance, rents, asset management, and compliance Experience working within cloud‑hosted SaaS environments, including integrations, security, and vendor‑managed delivery models Solid knowledge of project governance, including risk and issue management, change control, cutover planning, and quality assurance Demonstrated ability to lead multi‑disciplinary teams and manage complex stakeholder environments Experience delivering organisational or digital change, including process redesign, training, engagement, and adoption support Formal project management certification such as PRINCE2 Practitioner (desirable) Strong understanding of data governance, GDPR, and supplier management (desirable) What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)

Title: Junior Project Manager Location: Havant Salary: Up to £30,000 DOE Contract Type: Permanent | Full-Time Holt Engineering are recruiting for a Junior Project Manager to join a well-established manufacturing business in Portsmouth. This is a fantastic opportunity for someone early in their project management career who is looking to develop within a fast-paced engineering and product development environment. The successful Junior Project Manager will support the delivery of new product development and bespoke customer projects from concept through to launch, working closely with multiple departments across the business. Key Responsibilities Support the delivery of New Product Development (NPD) and bespoke customer projects from initial brief through to completion Create and maintain project plans, timelines, trackers, and project documentation Coordinate with internal teams including Design, Procurement, Planning, Production, and Sales Monitor project progress, track milestones, and highlight risks or delays Organise project meetings, record actions, and ensure follow-ups are completed Provide project updates and reporting to internal stakeholders Support change requests, specifications, and project scope updates Work with production and supply chain teams to ensure project feasibility and delivery targets are met Requirements Previous experience in a Project Coordinator, Project Support, or Junior Project Manager position Strong organisation and time management skills Excellent communication skills with the ability to work across multiple departments Comfortable managing multiple priorities in a fast-paced environment Good IT skills including Microsoft Office, particularly Excel, PowerPoint, and Teams Proactive and solutions-focused approach Desirable Exposure to manufacturing, engineering, or product development environments Project Management qualification such as PRINCE2 or APM would be beneficial but not essentialThis is an excellent opportunity to join a busy and innovative business where you’ll gain hands-on project experience and be supported in developing your project management career. Please note: Our client does not offer visa sponsorship. Applicants must have full right to work in the UK

Description As a Supplier Quality Engineer, you will be responsible for assuring the quality of products and services supplied by external suppliers, ensuring full compliance with organisational, customer, and regulatory requirements. You will drive supplier quality performance through effective quality management processes, audits, supplier development activities, and cross‑functional collaboration. This is a pivotal role in protecting the integrity of the supply chain and ensuring that end products consistently meet the high standards expected by customers and stakeholders, particularly within a regulated defence environment. The role requires significant travel across the UK (approximately 60%). While it reports to the Operational Quality Manager based at the Portsmouth site, the position could also be suited to an individual located in the North of the UK to better support travel requirements. Key Responsibilities 1. Supplier Quality Management Develop, implement, and maintain supplier quality management systems and processes. Establish and communicate supplier quality standards, specifications, and quality plans. Ensure supplier compliance with contractual, regulatory, and organisational requirements. 2. Supplier Evaluation and Selection Evaluate and support the selection of suppliers based on quality, cost, delivery, and service performance. Conduct supplier capability assessments and approval activities. Manage material quality for Stainless Steel, Aluminium, and Carbon Steel supply chains. 3. Audits & Inspections Plan and conduct supplier audits and manufacturing process assessments. Perform product and process inspections including dimensional, trial, final, and FAIR inspections. Identify, document, and manage non‑conformances, driving effective corrective and preventive actions. 4. Supplier Development Work in partnership with suppliers to improve quality performance and capability. Provide technical guidance, quality support, and training where required. Support continuous improvement initiatives across the supply base. 5. Quality Metrics & Reporting Monitor, analyse, and report supplier quality performance (e.g. defect rates, on‑time delivery). Prepare quality performance reports for internal stakeholders and senior management. Use data‑driven insight to identify trends and improvement opportunities. 6. Collaboration & Communication Work closely with Procurement, Engineering, Production, and Operations teams. Clearly communicate quality expectations, requirements, and feedback to suppliers. Act as the quality escalation point for supplier‑related issues. 7. Continuous Improvement Identify opportunities to improve supplier quality processes, systems, and performance. Stay current with industry best practice, standards, and regulatory developments. Education & Qualifications Degree in Engineering, Quality Management, or a related discipline or equivalent apprenticeship qualification • CSWIP 3.0 / 3.1 / 3.2 to BS EN ISO 17637 Skills, Knowledge and Expertise Substantial experience in Supplier Quality Engineering or a closely related role Proven experience working within the defence sector Strong understanding of defence regulatory requirements, including: DEFSTAN, DEFCON, QASOR Technical Skills & Knowledge Quality Management Systems: ISO 9001, AS9100, AS9102 Supplier auditing, assessments, and corrective action management Visual welding inspection, NDT, VT PCN Level 1 and/or AWS certification Creation and interpretation of ITPs, MITPs, QCPs Experience with Stainless Steel, Aluminium, and Carbon Steel fabrications Ability to read and interpret 3D models, DWF, STEP files, and PDFs Proficiency in quality tools and systems (e.g. Minitab, SAP QM) Familiarity with ERP and MRP systems Certifications (Desirable) AS9100 / ISO 9001 Lead Auditor Six Sigma or other recognised quality improvement certifications Skills and Attributes High attention to detail and accuracy Strong analytical and problem‑solving capability Confident, clear communicator with strong interpersonal and influencing skills Assertive, resilient, and adaptable to change Highly organised with the ability to manage multiple priorities Collaborative team player who actively contributes and coaches others when required Commercially aware with an understanding of how quality performance impacts production and customer fulfilment Committed to health, safety, environmental compliance, and continuous improvement Welcomes and promotes diversity and inclusion Travel Requirements UK‑based role with regular supplier visits Approximately 60% travel / 40% office based Other Requirements Candidates must have an existing right to live and work in the UK Candidates must have passed UK security clearance to the Security Check level or be able to obtain this level. To gain SC clearance will normally require a candidate to have been resident in the UK for a minimum of 5 years. Benefits Along with competitive salaries, CMS2 offers a great benefits package that includes life insurance, a generous leave allowance and more

Portsmouth £55,000-£65,000 per annum DOE plus 33 days holiday (including bank holidays), pension, bonus, life assurance, employee assistance programme, wellbeing support, and flexible benefits including cycle to work scheme Please note that the working pattern is 7.30am - 3.30pm About the Role You will lead the Composite department, overseeing all production operations and the entire workforce on the Cosham Site in Portsmouth. Your core focus will be to ensure the safe and efficient delivery of high-quality parts, develop a high-performing team, and drive a culture of continuous improvement to implement the Composite manufacturing strategy. As part of your key responsibilities you’ll: Ensure quality parts are delivered to plan within the Composite department through the correct allocation of resources Lead the safe and efficient running of all equipment and personnel across the department Be responsible for the Safety and Security of the Cosham Site Implement the Composite manufacturing strategy, working closely with the Head of Operations Develop a high-performing production team with a culture of quality, delivery, and continuous improvement Manage capacity planning and ensure adequate skills and manpower are available for meeting operational targets About You We’d love you to have the following skills and experience, but please apply if you think you’d be able to perform well in this role! Experience with team leadership and team development Experience in departmental management. Exceptional team engagement Strong communication skills, ensuring information is shared clearly and effectively Experience with Composite processes is preferred Experience in team and individual development About Unipart We are a supply chain performance improvement partner. We Design, Make, Move, and Improve components in our customers’ supply chains, keeping their operations and assets moving and working better, for longer. Through our commitment to continuously driving operational efficiencies, we improve performance - saving time, cost, and carbon. Our ambition is to be the driving force behind efficient, resilient, and sustainable supply chains. Equality, Diversity, and Inclusion We believe that a great workplace is one where you can bring your whole self to work. Our recruitment process is designed to be accessible, inclusive, and based entirely on merit. We define merit through a combination of technical skills and the core behaviours that help our people thrive at Unipart. We welcome applications from everyone, regardless of background or circumstances. We are committed to a policy of equal opportunity that exceeds our statutory obligations under the Equality Act 2010 and subsequent legislation. Whether it’s your age, disability, neurodiversity, gender identity, family status, or any other characteristic that makes you ‘you’ - it is your talent and potential that we value most. Adjustments for you: We want you to perform at your best. If you require any reasonable adjustments or have specific accessibility needs at any stage of the application or interview process, please let us know. We are here to support you. You may have experience of the following: Site Production Manager, Production Manager, Manufacturing Manager, Operations Manager (Manufacturing), Site Operations Manager, Production Lead, Manufacturing Team Leader (Senior), Plant Manager (Manufacturing), Workshop Manager, Factory Manager, Production Operations Manager, Manufacturing Supervisor (Senior), Continuous Improvement Manager (Production), Lean Manufacturing Manager, Production & Operations Lead, Composite Manufacturing Manager, Production Department Manager. REF-(Apply online only)

RESIDENT LIAISON OFFICER JOB DESCRIPTION THIS ROLE IS PROJECTS ON THE IOW, SO MUST BE BASED ON THE ISLAND Our business • Established in 1922 and incorporated in 1940, Chas Berger Limited is a Main Contractor providing a complete building service to companies and organisations throughout London and the South East of England, • From general building works for public and private clients, refurbishment and building contracts in excess of £1m through to multi million-pound framework agreements, Chas Berger Limited prides itself on its reputation for good quality service and excellent customer support Role overview • Working as part of a team on the company’s Planned Maintenance Social Housing and Refurbishment projects • Promote the company ethos of working in an open, honest and transparent manner at all times, • Responsible for ensuring that work is delivered safely, on time, within budget and to the agreed quality whilst exceeding client expectations, minimising risk and maximising opportunity for Chas Berger and its clients, • To understand, implement and adhere to the company SHEQ (Safety, Health, Environmental & Quality) ethos and ensure all employees and subcontractors do the same, being responsible for ensuring that SHEQ requirements are upheld to the highest of standards at all times Working hours • 8am to 5pm, Monday to Friday, with one hour for lunch • 25 days’ annual leave excluding public holidays MAIN DUTIES SHEQ • Ensure that company SHEQ policy and strategy is followed by all and highlight any concerns immediately to the Site Manager, • Liaise with line management, the Management Team and SHEQ Manager to ensure that SHEQ initiatives are implemented successfully, • Support, promote and develop an open, honest and transparent SHEQ culture at all levels, • Support and assist the Site Manager as required in compliance with SHEQ requirements, including but not limited to having a clear understanding of the Construction Phase Plan and engaging fully with all company SHEQ initiatives, • Assist the Site Manager with maintaining good order within site office and compound environment in accordance with both the company and legislative requirements, ensuring that all entering the office and compound do the same, • Assist the Site Manager with gathering any information required for handover packs and H&S Files, • Gather resident feedback as required during the course of the work Resident engagement, • Daily management of all resident engagement, liaison and communication on the project(s), • Leading on the development, review, updating and distribution of all resident communication documentation/material, ensuring high quality and compliance with client/project requirements, • Leadership on all resident issues, queries and/or complaints ensuring non-adversarial resolution is achieved, • Under the guidance of the Site Manager, provide a structured approach to resident liaison taking into full consideration health and safety, execution methods and quality, • Ensure that all systems in place to ensure works are completed in accordance with the company’s values and client’s requirements, reporting any exceptions to the Site Manager, • Develop effective working relationships with client representatives to reduce duplication and ensure consistency of information and approach keeping residents fully informed with regards to the programme, • Assessing where high risk/vulnerable/at risk residents are present and ensuring that the team tailors works according to the associated risk level, ensuring that any Safeguarding issues are reported to the Site Manager, • To report to the Site Manager as regards any events/issues, current or potential, which may affect our service, • Visit each resident prior to work commencing to introduce the company and communicate the scope of works, providing residents with contact numbers and a pack detailing the full RLO process, • Establish residents’ individual requirements by carrying out an initial resident profile, documenting any points discussed and tailoring individual communication plans accordingly, • Work with site staff to implement effective practices in terms of service delivery, communication and resident engagement, • Carry out a property condition survey and appliance survey with photographs where necessary with the resident before works start in the property, • Where appropriate, consult with resident representatives and groups, arranging meetings to communicate the programme, get feedback and discuss any other locally significant issues, • Manage complaints in line with our complaints procedure, • Attend community events as required, in or out of hours, including but not limited to presentations to resident groups, visits to schools etc, • Arrange satisfaction surveys for all residents, collating responses and work with project staff to use feedback to improve our service, • Recognise and encourage excellent performance amongst your colleagues and our supply chain, • Monitor and inspect works daily/continuously to ensure that service quality benchmarks are being adhered to, key performance indicators are met and target timescales achieved, reporting any exceptions to the Site Manager Reporting • Report to the Site Manager, • Provide honest, open and transparent reporting to line management, the Management Team and Directors as requested, at all times and in a consistent manner/format, • Attendance, preparation and reporting as required for all meetings in relation to the project, • Ensure that the required level and quality of information flows in a timely manner to the management team and client team Planning & Programming • Be familiar with any project KPIs and ensure that daily site activities support and underpin strong KPI results, highlighting any exceptions or issues accordingly and immediately, • Liaise with our supply chain, Site Manager and residents to ensure that daily attendance schedules are clearly communicated between all parties, including any changes thereto, • Keep residents fully aware of any programme changes, • Assist as required with booking and arranging access to residents’ homes Client Liaison, • Liaison with the client and contract administrator on both a formal and informal basis, • Ensure high client satisfaction is being achieved and constantly look to improve our client relationship SKILLS & KNOWLEDGE • Excellent people skills • Confident oral and written communication skills • Communicate in a timely and effective manner with all those who have a stake in the work • Effectively manage time in order to meet deadlines • Previous experience within resident liaison • Must have planned maintenance experience within the social housing sector Place of Work Your designated location for administrative purposes is the Bishops Stortford office of Chas Berger,current address The Lodge, Thremhall Park, Start Hill, Bishops Stortford, Hertfordshire, CM22 7TD, but as you are a mobile worker you will have no regular place of work. Chas Berger reserves the right to change your designated location to any other location in the London or the Home Counties/London suburban areas as may reasonably be required. Chas Berger will take account of your personal circumstances and give you reasonable notice before changing your designated location

Quality Engineer - Manufacturing Portsmouth Salary £42,000 - £47,000 - plus 33 days holiday, pension, life assurance, employee assistance programme, wellbeing support, and benefits scheme Please note that the working pattern is 8.00am - 4.00pm About the Job Responsible for developing processes to ensure incoming materials meet required quality standards. Responsible for identifying and raising quality issues and for speedily resolving them to ensure zero impact to the customer. Supporting new product introductions to ensure the robustness of product builds. Work in a team environment to develop and implement best practices that emphasise defect prevention, reduction in variation and waste and provide for continuous improvements in meeting all customer requirements. Review and manage the customer specific requirements in specifications, CAD data and drawings, ensuring they are correctly applied and integrated into the manufacturing processes via core tools such as PFMEA and Control Plans. Co-ordinating measurement activity for customer submissions such as ISIR, Capability Studies and MSA. Supporting pre-production trials to validate a production process with a high quality output Customer facing on quality issues, measurement reports and concessions QMS interaction (NCR, concessions, change management, audit etc.) Main Quality contact for select customers Principle Accountabilities Accountable to the Head of Operations and Program Management functions for ensuring new programmes are introduced to the required standard (PPAP) within the defined project timings Supporting the Head of Operations to ensure the effective quality performance of the team Identifying, defining and implementing opportunities for process and resource improvements Ensuring problem solving tasks are completed to IATF & AS requirements, ensuring efficient and robust closure and employing Unipart Way problem solving methodologies Support project and DFM reviews with achievable feasibility and quality directives Supply comprehensive production support for quality issues impacting the ability to manufacture and supply goods Ensuring Process and Product audits are being completed and acted upon in line with the annual audit plan. Any other task as agreed by your manager/supervisor About You Minimum 3-5years of experience in quality engineering within the automotive or manufacturing sector Hands-on experience with quality tools (e.g., PPAP, APQP, FMEA, SPC, MSA). Familiarity with IATF 16949 and ISO 9001 quality standards, AS9100 experience also fine. Proven track record in managing supplier quality issues and customer complaints (e.g., 8D, 5 Whys, Ishikawa diagrams) Experience with auditing (internal and external), root cause analysis, and corrective/preventive action processes Proficient in using quality management systems (QMS), ERP systems, and Microsoft Office Suite Ability to read and interpret technical drawings (GD&T knowledge preferred) Competency in statistical analysis and use of statistical software (e.g., Minitab, JMP) Understanding of metrology and hands-on experience with measurement tools (CMM, calipers, micrometers, etc.) Strong analytical and problem-solving skills Detail-oriented with a high level of accuracy Excellent communication and interpersonal skills to interact with teams, suppliers, and customers. Proactive, self-motivated, and capable of working independently and in a team environment. Resilient and adaptable in a fast-paced, high-pressure environment TPBN1_UKTJ

Technical Bid Manager Location: Fareham, Hampshire Salary: £50,000 – £56,000 per annum We are looking for a Technical Bid Manager to lead the quotation process from initial enquiry through to final submission. This is a key role within a busy manufacturing and engineering environment, responsible for ensuring bids are accurate, commercially sound, and delivered on time. About the role You will take ownership of the full bid and quotation process, reviewing technical data packs, drawings, bills of materials, specifications, and customer requirements to establish scope and identify risk. You will develop accurate material and labour costings, coordinate workload across the team, and work closely with engineering, procurement, operations, and commercial colleagues to ensure quotations are both technically robust and commercially aligned. Key responsibilities Manage the full quotation and bid process from enquiry to submission. Coordinate and prioritise team workload across costing and quote preparation. Review drawings, specifications, BOMs, and technical data packs. Build accurate cost models covering materials, labour, subcontract processes, and associated costs. Liaise with engineering, procurement, operations, and commercial teams. Identify and escalate technical, commercial, and operational risks. Ensure quotes are completed to customer and internal deadlines. Support pricing strategies that protect competitiveness and margin. Maintain clear and auditable quotation records and supporting documentation. Drive continual improvement in bidding methods, response quality, and workload planning. Provide leadership and direction to the estimating/quotations team. Support internal bid review and approval processes.What we are looking for Experience in a technical bidding, estimating, quotations, or proposals role within manufacturing or engineering. Strong understanding of material costing, labour costing, and pricing principles. Ability to read and interpret technical drawings, specifications, and customer data packs. Commercial awareness with the ability to balance customer and business needs. Strong organisational skills and the ability to manage multiple priorities. Experience leading or coordinating team workload. Excellent communication skills and a collaborative approach. High attention to detail and strong analytical ability. Competent with ERP systems, costing tools, and Microsoft Excel. Right to work in the UK without visa sponsorshipDesirable experience Background in electronics, engineering, or contract manufacturing. Knowledge of subcontract processes, supply chain costing, and production methods. Previous people management or team leadership experience. Experience working with OEM or regulated industry customers.This is an excellent opportunity for someone who enjoys combining technical understanding with commercial thinking, and who can lead a bid process from start to finish in a fast-paced environment. Please contact Max Sinclair (url removed)

Position: Production Manager Location: Portsmouth Salary: £38-42k DOE We're looking for an experienced Production Manager / Manufacturing Manager to lead production operations with a focus on efficiency and quality for our Portsmouth based client. You'll oversee end-to-end manufacturing, drive continuous improvement, and optimise workflows while maintaining high standards. This is a key role in a fast-paced environment, offering the opportunity to shape operational performance and deliver consistently strong results. Production Manager Responsibilities: Lead and manage the entire production process, from raw material procurement to final assembly, ensuring timely delivery of products that meet quality specifications. Implement and sustain lean manufacturing principles to streamline operations, reduce waste, and enhance overall productivity. Drive continuous improvement initiatives by analysing manufacturing processes, identifying bottlenecks, and implementing process enhancements. Oversee quality control procedures to ensure all products adhere to industry standards and customer expectations. Collaborate with engineering and maintenance teams to troubleshoot mechanical issues, improve assembly processes, and ensure equipment reliability. Monitor key performance indicators related to production efficiency, supply chain management, and overall plant performance. Production Manager Requirements: Proven experience in production management within manufacturing environments, particularly in Plastics OR Construction Materials Expertise in lean manufacturing techniques, process improvement strategies, and continuous improvement methodologies. Solid understanding of mechanical principles Excellent skills in production planning, operations management, and supply chain management to optimise workflow. Ability to lead cross-functional teams with strong communication skills and a focus on team development. Production Manager Package: Full-time, Permanent £38,000.00-£42,000.00 per year 07.30 - 16.30 Monday to Thursday and 07.30 - 14.00 on a Friday 28 days holiday including bank holidays Christmas shut down Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for. TPBN1_UKTJ

BAE Systems Portsmouth - Design Engineer Mechanical/Piping 12 month contract 5 days onsite per week. £30.18 per hour Umbrella - inside IR35 Role Description To undertake a defined range of detail design activities in line with all relevant processes and quality requirements of Mechanical/Piping design package and reports for Installation solutions on Legacy Warships, supplying advice and support to operations and other functions and/or to organise and co-ordinate aspects of detail design activity ensuring defined objectives are achieved whilst continually maintaining quality and service requirements. Core Duties (GTI Description) Typical duties include (but are not limited to): (suggested 5-10 bullets/statements, indicative of the role at this level) · Support the development of best practice to increase the capability, performance of tools and processes · Support the developing, maintaining and modifying engineering processes and procedures in assigned areas in response to technical developments and operational need · To identify training requirements, skills gaps and development requirements of own discipline. · Undertake task verification/checking of other Design Engineer’s work as directed by Principal Engineering Manager. · To lead and conduct ship trials, surveys and engineering support activities. · Undertake estimating of mechanical elimates of the tasks. Support the developing, maintaining and modifying engineering processes and procedures in assigned areas in response to technical developments and operational need · Produce and develop complex designs in line with specifications and all quality and technical standards, and carry out detail design appraisals in assigned areas to ensure all standards are maintained, taking due cognisance of design for production · Carry out investigations into operational problems or developments and develop and prepare solutions, individually or as a member of a design team · Support the development of best practice to increase the capability, performance of tools and processes · To identify training requirements, skills gaps and development requirements of own discipline · Undertake task verification/checking of other design engineer’s work as directed by principal engineering manager · To lead and conduct ship trials, surveys and engineering support activities Additional Key Accountabilities: · Keep up to date in relevant technical areas, develop skills and capabilities to be able to provide more effective services (seeking and sharing good practice and knowledge to continuously improve practices), and supply technical support and expertise to others as required. · Provide help and direction to less experienced team members to support both their effective working and their development. · Manage assigned budgets and lead, develop and motivate assigned employees to ensure they are aware of and capable of delivering their accountabilities. · Make engineering decisions within own sphere of responsibility and delegated authority. · Compile accurate estimates. · Compile statements of Works (SOW,s) on behalf of customer when required. Safety: (For an individual contributor – include the statement below) § The role holder is responsible for taking reasonable care of their own health and safety ensuring high standards for safety, health and environment (SHE) in our organisation are maintained. This includes co- operating and following all reasonable instruction, information and training reporting work-related hazards or incidents and using all equipment for the purpose intended. More detailed responsibilities are captured within the Company Health & Safety Policy (759/OF/016) and the Company Environmental Policy (759/OF/029). Knowledge, Skills and Qualifications (GTI Qualification requirements) Knowledge: (Recommended max 5 bullets/statements) § Possesses in-depth knowledge and design experience of all aspects within Mechanical/Piping Disipline using AutoCAD/Inventor. § Able to perform robust analysis using recognised draughting and analytical tools and to make sound judgements based on experience. § Has sufficient breadth of knowledge of warship design and the sound judgement needed to be able make correct trade- off decisions § Provide technical support and troubleshooting responses in assigned areas to operational units or other activities. § Requires an understanding of how activities of own team interrelates and interacts with other functional areas aligned to the same contract or project. § Understands in detail the technical specification aligned to the functional area of activity. Can manage requirements and identify scope change. § A full understanding of the external environment including the MoD structure and their engineering processes. § Can apply the relevant Business processes to developing their outputs Skills: (Recommended max 5 /statements) § Requires very strong communication, diplomacy and interpersonal skills. Communication will be both internal and external and will include a regular interface with external providers and customers both informally and at meetings these dealings will affect the reputation of Design Services. § Is required to influence, guide and convince others to adopt a particular course of action. § Required to exchange complex engineering design information at Design Reviews. AutoCAD/Inventor design experience and in addition to this, having the ability to produce detailed manufacturing & assembly drawings § An understanding of detailed system and technical engineering drawings including manufacturing drawings with knowledge of projection layouts, scaling & tolerancing § Knowledge of ship system engineering drawings such as diagrammatic, piping isometrics and also ship systems materials and equipment (symbols) § Knowledge of maritime warship/commercial systems i.e. fluid based systems, Mechanical systems. and able to perform, as a minimum, basic pressure loss and flow calculations, with a view to sizing pipework in designs § Understanding of naval ships commercial mechanical/piping systems for various classes of vessel § HND/HNC in a Mechanical discipline Qualifications: (Specify only as appropriate, or say ‘none specified.’ Where a qualification is listed, please indicate whether it is ‘Expected or Preferred.’) · Min HND/HNC Qualification in Mechanical /Piping Discipline or extensive industrial experience

Our client is an innovative, industry-leading manufacturer serving the construction, industrial, and rail sectors. They are seeking a Buyer, with international buying experience to join their growing team and align with their 5-year growth strategy. This role is offering the chance to work with cutting-edge products in a purpose-led business that values integrity, passion, excellence and respect. You will be primarily based in their offices in Fareham; however, the role will require international travel on occasion Reporting to theProcurement Manager, as buyer you will have daily responsibility for miscellaneous parts ordering and leading supplier relationship management with your designated suppliers. You will support the transition to a demand led procurement model by aligning purchasing decisions with forecasted demand, customer requirements and strategic growth plans This role plays a key part in enabling their market-driven strategy by ensuring procurement decisions support customer demand, product alignment, and scalable supply chain performance Key Responsibilities • Source and purchase materials in line with business requirements by raising and managing purchase orders through MRP system, supporting strategic sourcing initiatives aligned with organisational objectives., • Monitoring supplier performance in terms of delivery, quality, cost, planning, confirmation and communication., • Build and maintain strong supplier relationships by negotiating pricing, payment terms, and lead times, supporting supplier evaluation, onboarding, and development activities, and proactively resolving supply chain issues to minimise disruption., • Identify cost-saving opportunities and value-engineering options by supporting budget tracking and cost analysis reporting, contributing to contract negotiation and management activities, and monitoring market trends affecting the supply of metal and electrical components., • Ensure ERP system product lines – BOMs – are accurate and up to date, raising new codes, adding new products and amending live BOMs as necessary, • Raise authorised purchase orders and manage throughout supply chain cycle, • Lead supplier consolidation projects with the aim of reducing cost to the business, • Lead BOM rationalisation projects working with all other teams to reduce Inventory portfolio., • Ensure Component Pricing information is up to date and accurate against each item in your portfolio, • Facilitating of inventory checks and stock control processes, ensuring stock accuracy is maintained within agreed targets, and investigate any variances by analysing goods received, usage, and expected stock levels to identify and resolve discrepancies., • Use data and reporting to inform purchasing decisions, identify trends and improve forecast accuracy, • Maintain high quality procurement data to support business wide planning and reporting, • Actively collaborate with Sales, R&D and Operations to ensure alignment between demand, product specification and supply capability, • Identify and mitigate supplier risk, including capacity constraints and single-source dependencies, and support supply continuity planning, • Support wider procurement and supply chain activities as required Requirements • Experience of procurement and supplier management processes, • Knowledge of generic ERP systems and product/BOM maintenance, • Excellent Excel skills, • CIPS Level 4 Diploma, or working toward qualification, • Experience in managing suppliers internationally, • Strong decision making and problem-solving skills, • Have high levels of attention to detail and will remain calm under pressure, • Commercial awareness with an understanding of how procurement decisions impact cost, service and overall business performance Benefits Salary- £30,000- £40,000 Profit related bonus Office Based

Description As a Supplier Quality Engineer, you will be responsible for assuring the quality of products and services supplied by external suppliers, ensuring full compliance with organisational, customer, and regulatory requirements. You will drive supplier quality performance through effective quality management processes, audits, supplier development activities, and cross-functional collaboration. This is a pivotal role in protecting the integrity of the supply chain and ensuring that end products consistently meet the high standards expected by customers and stakeholders, particularly within a regulated defence environment. The role requires significant travel across the UK (approximately 60%). While it reports to the Operational Quality Manager based at the Portsmouth site, the position could also be suited to an individual located in the North of the UK to better support travel requirements. Key Responsibilities 1. Supplier Quality Management Develop, implement, and maintain supplier quality management systems and processes. Establish and communicate supplier quality standards, specifications, and quality plans. Ensure supplier compliance with contractual, regulatory, and organisational requirements. 2. Supplier Evaluation and Selection Evaluate and support the selection of suppliers based on quality, cost, delivery, and service performance. Conduct supplier capability assessments and approval activities. Manage material quality for Stainless Steel, Aluminium, and Carbon Steel supply chains. 3. Audits & Inspections Plan and conduct supplier audits and manufacturing process assessments. Perform product and process inspections including dimensional, trial, final, and FAIR inspections. Identify, document, and manage non-conformances, driving effective corrective and preventive actions. 4. Supplier Development Work in partnership with suppliers to improve quality performance and capability. Provide technical guidance, quality support, and training where required. Support continuous improvement initiatives across the supply base. 5. Quality Metrics & Reporting Monitor, analyse, and report supplier quality performance (e.g. defect rates, on-time delivery). Prepare quality performance reports for internal stakeholders and senior management. Use data-driven insight to identify trends and improvement opportunities. 6. Collaboration & Communication Work closely with Procurement, Engineering, Production, and Operations teams. Clearly communicate quality expectations, requirements, and feedback to suppliers. Act as the quality escalation point for supplier-related issues. 7. Continuous Improvement Identify opportunities to improve supplier quality processes, systems, and performance. Stay current with industry best practice, standards, and regulatory developments. Education & Qualifications Degree in Engineering, Quality Management, or a related discipline or equivalent apprenticeship qualification - CSWIP 3.0 / 3.1 / 3.2 to BS EN ISO 17637 Skills, Knowledge and Expertise Substantial experience in Supplier Quality Engineering or a closely related role Proven experience working within the defence sector Strong understanding of defence regulatory requirements, including: DEFSTAN, DEFCON, QASOR Technical Skills & Knowledge Quality Management Systems: ISO 9001, AS9100, AS9102 Supplier auditing, assessments, and corrective action management Visual welding inspection, NDT, VT PCN Level 1 and/or AWS certification Creation and interpretation of ITPs, MITPs, QCPs Experience with Stainless Steel, Aluminium, and Carbon Steel fabrications Ability to read and interpret 3D models, DWF, STEP files, and PDFs Proficiency in quality tools and systems (e.g. Minitab, SAP QM) Familiarity with ERP and MRP systems Certifications (Desirable) AS9100 / ISO 9001 Lead Auditor Six Sigma or other recognised quality improvement certifications Skills and Attributes High attention to detail and accuracy Strong analytical and problem-solving capability Confident, clear communicator with strong interpersonal and influencing skills Assertive, resilient, and adaptable to change Highly organised with the ability to manage multiple priorities Collaborative team player who actively contributes and coaches others when required Commercially aware with an understanding of how quality performance impacts production and customer fulfilment Committed to health, safety, environmental compliance, and continuous improvement Welcomes and promotes diversity and inclusion Travel Requirements UK-based role with regular supplier visits Approximately 60% travel / 40% office based Other Requirements Candidates must have an existing right to live and work in the UK Candidates must have passed UK security clearance to the Security Check level or be able to obtain this level. To gain SC clearance will normally require a candidate to have been resident in the UK for a minimum of 5 years. Benefits Along with competitive salaries, CMS2 offers a great benefits package that includes life insurance, a generous leave allowance and more. TPBN1_UKTJ

Supply Chain Manager (Manufacturing / Supply Chain) £45,000 - £55,000 + Bonus + Pension + Progression + Training + Company Benefits Portsmouth Are you a Supply Chain Manager from a manufacturing background or similar, looking to join a well-established and growing business where you can take ownership of major customer programs, drive cost-saving initiatives, and develop your career within a supportive environment? On offer is the opportunity to join a market-leading business, supporting high-profile manufacturing operations across multiple UK sites. The company invests heavily in employee development and offers long-term progression opportunities within a collaborative and customer-focused environment. In this role, you will be responsible for ensuring all program deliverables are achieved across several UK manufacturing sites. You will oversee the effective management of Engineering / Maintenance and Factory Consumables Storerooms, ensuring best practices in Inventory Management and Material Handling are maintained. This role would suit a Supply Chain Manager from a manufacturing background or similar with experience in manufacturing, engineering maintenance, procurement, or supply chain operations, looking for long-term progression and development opportunities. The Role: Managing integrated supply programs across multiple UK manufacturing sites Overseeing Engineering / Maintenance and Factory Consumables Storeroom operations Driving cost reduction and Total Cost of Ownership initiatives Managing inventory control, procurement, and material handling processes The Person: Supply Chain Manager or similar Manufacturing background Strong leadership and project management skills Full UK Driving Licence * Willingness to travel regularly between UK customer sites Reference number: BBBH25505A Keywords: Program Manager, Supply Chain, Procurement, Inventory Management, Engineering Maintenance, Storeroom Operations, Manufacturing, Aerospace, Facilities Maintenance, Operations Manager, Purchasing, Cost Reduction, Inventory Control, Logistics, Supply Chain Manager, Fareham, Titchfield, Portsmouth, Southampton If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website

Portsmouth / Midlands base with travel to client sites Up to £70,000 dependant upon experience, plus car / car allowance, 33 days holiday (including bank holidays), pension, life assurance, employee assistance programme, wellbeing support, and flexible benefits including cycle to work scheme About the Role As a Business Development Manager for UPCS you will be responsible for driving strategic growth and market expansion for a Polymer and Composite component manufacturing business. This will involve the delivery of commercial targets and the implementation of robust sector strategies. You will be a proactive collaborator, have proven experience as a BD Manager, be ready for travel to customer sites, and ideally be based either Portsmouth or Midlands, UK, with opportunity for hybrid working - with time on-site and time with customers. As part of your key responsibilities you’ll: Lead the iterative development of sector strategies by mapping high-potential markets and emerging trends Execute the full sales lifecycle to secure new business that meets or exceeds profitability and growth targets Oversee the submission of detailed bids, tenders, and executive presentations, ensuring strict commercial and financial alignment Cultivate high-value relationships and lead the ‘Gate to Great’ onboarding process to ensure long-term contract stability Partner with Marketing to deliver sector-specific messaging that articulates a clear competitive advantage Synthesise customer insights into scalable service offerings by collaborating with technical and engineering teams Ensure all growth activities remain synchronised with corporate objectives and the principles of The Unipart Way Maintain a robust opportunity pipeline while providing high-quality cross-vertical leads to support holistic company growth About You We’d love you to have the following skills and experience, but please apply if you think you’d be able to perform well in this role! Industry understanding of injection moulded plastics or carbon fibre composites, with the ability to bridge the gap between engineering and commercial sales Proven track record in high-value business development, with a readiness for frequent travel between sites (Portsmouth/Midlands) Proven experience in sales within manufacturing and/or engineered materials Ability to leverage professional experience from the Automotive industry or related high-growth sectors, preferably: Aerospace, Defence, Industrial or Medical device manufacturing A history of successfully driving market penetration and securing sustainable, high-value revenue growth Expert at building ‘executive presence’ and managing sophisticated relationships with diverse internal and external stakeholders Proactive mindset for identifying untapped market potential and converting emerging trends into commercial opportunities Advanced skills in securing favourable commercial terms and presenting complex value propositions to diverse audiences Expertise in creating detailed quotations and managing rigorous tender processes to ensure profitability targets are met About Unipart We are a supply chain performance improvement partner. We Design, Make, Move, and Improve components in our customers’ supply chains, keeping their operations and assets moving and working better, for longer. Through our commitment to continuously driving operational efficiencies, we improve performance - saving time, cost, and carbon. Our ambition is to be the driving force behind efficient, resilient, and sustainable supply chains. Equality, Diversity, and Inclusion We believe that a great workplace is one where you can bring your whole self to work. Our recruitment process is designed to be accessible, inclusive, and based entirely on merit. We define merit through a combination of technical skills and the core behaviours that help our people thrive at Unipart. We welcome applications from everyone, regardless of background or circumstances. We are committed to a policy of equal opportunity that exceeds our statutory obligations under the Equality Act 2010 and subsequent legislation. Whether it’s your age, disability, neurodiversity, gender identity, family status, or any other characteristic that makes you ‘you’ - it is your talent and potential that we value most. Adjustments for you: We want you to perform at your best. If you require any reasonable adjustments or have specific accessibility needs at any stage of the application or interview process, please let us know. We are here to support you. You may have experience of the following: Senior Business Development Manager, Strategic Account Manager, Automotive Sector Sales Manager, Commercial Development Manager, Key Account Director, Head of Business Development (Automotive), Client Solutions Manager, Market Development Manager, Growth & Partnerships Manager, Bid and Tender Manager, Sales & Strategy Manager. REF-(Apply online only)

Senior Commercial Officer - 4 month contract - Portsmouth, Hampshire - £57.57 ph UMB or £42.70 ph PAYE (Inside IR35) The Umbrella rate quoted above is the Gross Umbrella rate (i.e. the rate we pay to the Umbrella Company inclusive of ALL employment costs). Please note, the rate paid by the Umbrella will be less, as will a Limited Deemed rate or Agency PAYE rate. Please get in touch to discuss the rates via these different payment vehicles. The Role The Senior Commercial Officer will support the Senior Commercial Manager as a member of the vibrant and highly capable Commercial team within our Simulation and Training business sector, managing and delivering a portfolio of contracts and bids to a range of domestic customers in a dynamic commercial environment. The Simulation and Training team is a part of the wider Products commercial team, within the Maritime & Land Defence Solutions business, comprising commercial professionals of all grades and experience who provide valued and trusted business advice by ensuring a balance of both maximising opportunities and managing business risk. The team is a close-knit supportive team that also has the benefit of reach back into the wider commercial community across the BAE Systems Corporation across the world that also presents unrivalled opportunities for career development and growth. Role Responsibilities: Not limited to… Supporting the Commercial team on a wide range of contracts, projects and campaigns Acting in a customer facing role, resolving queries. maintaining and building on an enduring relationship. Actively participating in Bid Teams to prepare Bid and Contract materials including the preparation and presentation of commercial bid reviews, ensuring the necessary approvals are obtained in accordance with appropriate governance Working closely with a portfolio of project teams as well as business development and our customers to ensure smooth running of the existing contracts and the development of new business opportunities Responsibility for providing the commercial strategy on issues such as contract development, pricing strategies, governance compliance, customer negotiation, commercial risk and delivering margin growth opportunities Reviewing and obtaining authorisation to agree contract terms and conditions including engagement with central functions to address specific compliance issues (Legal, Intellectual Property, Tax etc.) Leading the negotiation of proposals, of varying complexity, with customers ensuring this results in acceptable business agreements and contracts that align with business objectives Closely working with Supply Chain team to ensure proper flow down of contractual obligations Establishing excellent working relationships with both internal and external customers and stakeholders What are BAE Systems looking for from you? Previous experience working in a commercial function In depth professional knowledge of Commercial principles, techniques and practices with an understanding of how Commercial roles fit into an organisation as a whole Knowledge of the defence sector with an awareness of international competitors and partners An understanding of BAE Systems and their Business operations 3 years plus commercial experience, ideally in both UK and export defence environments Suitable related experience working within a highly collaborative team environment High degree of customer focus and a commitment to meet deadlines and targets Broad professional knowledge of Commercial principles, techniques and practices and application and understanding of the Commercial role in organisations Good understanding of contract terms, contractual and legal frameworks with the ability to identify key contractual risks Security Requirements: SC & UK EYES ONLY This role will require the person to hold full Security Clearance (SC) prior to working onsite. You will need to obtain a BPSS check as part of this process. You must currently hold or be eligible and willing to obtain SC and you must be eligible to work in the UK without sponsorship and have lived and worked in the UK for a minimum 5 year period. If you are unsure as to whether you are eligible, please contact me to discuss. This role also requires you to be a sole British national and therefore hold no other nationalities

Shipping Administrator | Freight Administrator | Shipping Coordinator | Logistics Administrator | Freight Operations | Shipping | Portsmouth Location: Portsmouth, UK Salary: Competitive salary + benefits Job Type: Full-time, Permanent Schedule: Monday–Friday | 9am–6pm About the Role We are hiring for a Shipping Administrator / Shipping Coordinator to join an established global logistics and freight organisation at their Portsmouth site. The successful Freight Administrator / Logistics Administrator will support the warehouse, office, and management teams, ensuring the smooth running of daily shipping and freight operations. The role requires excellent communication skills, strong administrative ability, and the capability to manage time-sensitive logistics tasks accurately and efficiently. This opportunity would suit an individual who can remain calm under pressure, multitask effectively, and confidently solve operational problems within a busy freight forwarding and logistics environment. The Role As a Shipping Administrator, you’ll play a key role in supporting the company’s daily freight and shipping operation. Your responsibilities will include: • Pulling trailers from the company’s WMS (Warehouse Management System) • Booking trailers with the company’s designated shipping lines • Processing and booking HAZ / hazardous freight shipments • Processing and booking freight travelling under RGR, T Forms, and C88 documentation • Maintaining consistent communication with the Warehouse Manager regarding trailer loading schedules • Sending daily Voyage Presentation Lists to shipping lines • Adding trailer PIN release numbers to the shipping stock sheet • Investigating consignments received un-manifested or manifested and not received • Updating the shipping stock sheet with incoming trailer information for Portsmouth • Updating the shipping line diary within the company’s WMS system • Uploading PODs (Proof of Delivery) to the company database • Providing Certificates of Shipment when requested Key Requirements • Previous administration experience using Microsoft Office systems • Excellent customer service and communication skills • Strong organisational and multitasking abilities • High levels of attention to detail and accuracy • Quick to learn with a proactive and can-do attitude • Flexible approach with the ability to adapt to changing operational demands • Resilient and comfortable working within a fast-paced logistics environment Desirable Experience • Previous experience within a shipping, freight forwarding, logistics, or warehouse operation • Knowledge of customs warehousing procedures and shipping documentation Salary & Benefits • Competitive starting salary • Monday–Friday | 9am–6pm • Holiday package • Company pension scheme • Fully funded healthcare plan • Long service rewards and recognition • Cycle to work scheme • Refer-a-friend bonus scheme • Excellent career development opportunities Why Apply? This is an excellent opportunity to join a well-established global logistics and freight business offering long-term stability and strong team support. To Note: Should you have not heard back within 14 days, please assume that you have been unsuccessful TLP Recruitment acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. Please note that by applying for this position you consent to TLP processing and storing your personal data for the purposes of providing you with work finding services. We process your personal data in accordance with data protection laws, which require us to give you a Privacy Statement to explain how we manage your personal data. Our full Privacy Statement is available to view on the TLP website, or it can be provided upon request

Shuttering Carpenter Location: Hayling Island Salary: £24.00 - £26.00 per hr Contract type: Temporary Duration: 4 weeks Start Date: 18/05/2026 Premier Recruitment Solutions is a specialist recruitment company working in partnership with a general builder. We are recruiting for Shuttering Carpenters to work with their existing team. You will be working as a Shuttering Carpenter on a project in Hayling Island. Requirements for the Shuttering Carpenter job role: Valid CSCS qualification Your duties as a Shuttering Carpenter will include: Timber formwork on a sea wall Assisting the Site Manager Standard Hours for the Shuttering Carpenter role: Monday to Friday 07:30hrs - 16:30hrs (But sometimes you may be required to work longer due to the workloads) Weekend work may be available Premier Recruitment Solutions Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. we are an equal opportunities employer and all applications will be assessed solely on merit

The role of IT Category Manager requires a professional to oversee and manage the IT procurement category within this utilities organisation. We are looking for a seasoned end to end professional, but one who also possesses innovative and strategic oversight. Client Details This opportunity is with a medium-sized organisation within the utilities industry. The company is committed to excellence in its operations, ensuring sustainable practices and efficient resource management. Description Develop and implement procurement strategies for IT categories to optimise value and cost efficiency. Conduct market analysis to identify trends and opportunities within the IT procurement space. Collaborate with stakeholders to understand their requirements and align procurement activities with business goals. Negotiate contracts with suppliers to secure favourable terms and conditions. Monitor supplier performance and maintain strong relationships to ensure service quality. Ensure compliance with procurement policies and industry regulations. Identify cost-saving opportunities and implement effective solutions. Prepare and present detailed reports on procurement activities and performance.Profile A successful Category Manager IT should have: Proven experience in procurement and supply chain management within the energy & natural resources industry. Strong knowledge of IT procurement processes and supplier management. Excellent negotiation and communication skills to build and maintain supplier relationships. Ability to perform market analysis and develop effective procurement strategies. Familiarity with relevant procurement regulations and compliance requirements. Strong analytical and problem-solving skills to identify cost-saving opportunities. Capability to work collaboratively with cross-functional teams.Job Offer Competitive salary ranging from £50,000 to £63,000. Permanent position offering job security and career progression. Opportunity to work in a reputable organisation in the utilities industry. Hybrid working pattern. Generous employer pension contributions, up to 15% Enhanced Company maternity, adoption, and paternity leave and pay. Private medical care. Retailer discounts. And more!If you are a skilled Category Manager IT looking for an exciting opportunity in Portsmouth, we encourage you to apply today

Job title Field Installation Engineer Function Installations, Field Operations Location Field based Reports to Installations Manager Responsible for staff N/A About our business JLA is a mission critical infrastructure solutions business offering services Laundry, Catering, Heating, Fire Safety, Infection Control and Air Conditioning. The company offers an end-to-end, on premise, machine supply and breakdown service proposition under the name Total Care, and additional products and services. JLA is driven by a world class Sales & Marketing engine, owns and maintains all assets, and has an efficient on-site operations team working daily with customers. When you join the JLA family, you'll also gain access to an extensive benefits package. We care about our people and take your well-being seriously, which is why we offer a range of supportive tools for health and wellbeing, financial guidance, and legal advice. Our Employee Assistance Programme, 24/7 Wellness and Lifestyle App plus a dedicated team of Mental Health First Aiders are there to support you through life's challenges. We also offer up to 8 counseling sessions, which can be in-person or remote, providing you with the support and flexibility to suit your own personal needs. You can reach any fitness goals with our free onsite gym at head office along with a range of other gym membership discounts available. To offer financial support, we not only provide life assurance coverage, company sick pay, and a company pension scheme, we offer a range of added benefits such as free office parking, eye care vouchers, a cycle-to-work scheme, and exclusive discounts through our staff benefits hub. We really pride ourselves in offering a healthy work-life balance and believe it is important to have time away to recharge which is why we provide 25 days of annual leave plus bank holidays, flexible working options, and enhanced family leave policies. We are a company that appreciates you and invests in your success and even have a Colleague Recognition Scheme to celebrate your achievements. We're dedicated to your growth, offering support in career development and training. We value your referrals, and through our Refer a Friend scheme, you can earn up to £1,000 in bonus rewards! Role overview As a Field Installations Engineer at JLA, you will support us on our mission to be a trusted partner for our customers, making sure that we are always there and that we take care of it. Youll support our customers across care, hospitality, education, housing, healthcare and prison services with their laundry servicing and repair needs. This is an exciting opportunity that provides you with plenty of variety each day, providing excellent service and technical expertise to customers, and a role where you can develop and take pride and care in your work. You will be installing a variety of laundry and catering equipment across our customer sites. We are investing in training and development for our Engineers with our new JLA Academy, which will provide you with the opportunity to cross-skill across both laundry and catering equipment, develop your mechanical and electrical skills/experience, and enhance your product knowledge on JLA laundry machines. Key tasks Install laundry & catering equipment as and when directed by the Installations team Carry out comprehensive, competent, and safe remedial repairs to customer and Company satisfaction Clean equipment and the immediate vicinity of the machine after completion of site work, leaving the site clean and tidy Complete and provide reports in relation to work and equipment as required, including reporting your arrival and departure from each call and obtaining customer signature where required Drive the implementation of engineering best practice processes, procedures and tools that maximise effectiveness and efficiency Maintain technical and system updates and releases as required Manage tooling and van stocks as well as job part orders appropriately by receipting, consuming or returning for each job Support growth generation by submitting lead opportunities Service Delivery Maintain our reputation within the industry by demonstrating excellent customer service practices, acting responsively to the needs of the customer with the aim of delivering customer satisfaction Manage on-site customer queries in a fair and courteous manner Handle any challenging situations with customers in a professional and courteous manner at all times. Be responsive and cooperative and achieve the required tasks set Managing Health & Safety To carry out all activities with proper regard for personal safety and the safety of colleagues and customers by ensuring adherence and reasonable care of H&S regulations and procedures at all times Report identified risks in line with H&S procedures Attend H&S training and briefings on a regular basis The above list of job duties is not exclusive or exhaustive and the post holder will be required to undertake such tasks as may reasonably be expected within the scope of the position. Criteria Essential (attributes required for candidate to be considered) Desirable (attributes can be trained or developed) Knowledge and Skills (what you know and what you can do) Skilled in installing laundry/ catering equipment Knowledge of electrical and plumbing work Proficient level of computer skills Good knowledge of the English language, both written and verbal Electrical installation qualification Gas Safe registered Experience (what you have done) Experience of working in a customer-facing role Experience in a field based role Experience of managing challenging situations in a customer-facing role Experience of identifying selling opportunities in order to generate sales leads Personal qualities (the way you think and act) Aptitude for practical work Good attention to detail Talent for solving problems Good communication and customer service skills Resourceful, with the ability to work independently Good time management skills Flexibility in support of the customer and business needs Qualifications Full driving license Recognised qualification in a Gas Safe environment. Recognised qualification Electrical installation TPBN1_UKTJ

Embedded Software Tech Lead (IC Bring-Up, Pre-Tapeout Validation) Whiteley, Fareham (3 days per week onsite) £80,000 + 10% Bonus This role cannot offer Visa Sponsorship. Your new company You'll be joining the European HQ of a high-growth, innovation-led semiconductor business operating at the forefront of next-gen connectivity technology. The company is pushing technical boundaries, with significant investment into R&D and a clear vision to lead across firmware and software. The role is hybrid and you'll be required to work 3 days onsite in Whiteley. Your new role This is a hands-on Technical Lead position sitting within a specialist embedded software team, where you will take ownership of a small sub-team of engineers while remaining deeply involved in engineering delivery. You will be responsible for driving the design, development and delivery of low-level embedded software and firmware for advanced capacitive sensing products, working across the full software lifecycle from concept through to production. A key part of the role is technical ownership. This is not a position for someone who has only contributed as an individual contributor. You will bring prior experience leading projects or mentoring engineers, with accountability for delivery, technical direction and quality. While overall team allocation sits with the Software Manager, you'll be the technical authority for your sub-team, guiding architecture decisions, overseeing delivery and supporting engineers day-to-day. From a technical perspective, this is a true embedded role. You will be working close to the hardware, developing low-level software on boards in a pre-RTOS environment. Strong experience in bare metal development is essential, alongside a solid understanding of IC interaction and Digital Signal Processing concepts. The work combines firmware development in C with higher-level modelling and algorithm development using Python, giving a strong blend of low-level engineering and system-level thinking. The environment is collaborative with a strong engineering culture where people are trusted to take ownership and make a tangible impact on product direction. Despite its growth trajectory, there remains a close-knit feel across teams, with a real emphasis on knowledge sharing and continuous improvement. What you'll need to succeed You will already be operating at Senior/Lead level with 2+ years leadership experience (either mentoring others or leading projects). We are looking for Semiconductor lifecycle experience, specifically deep knowlegde of IC Bring Up / Pre-Tapeout Validation. You will bring strong experience in embedded software and firmware development using C, alongside practical experience working at a low level on embedded targets. A background in Bare Metal development is critical, as is familiarity with working directly with hardware, interfaces and ICs. You will ideally have exposure to DSP or similar signal processing concepts, alongside experience using Python or similar tools for modelling, simulation or data analysis. Beyond technical capability, you will be someone who enjoys leading from the front, able to guide engineers, make decisions and take responsibility for outcomes within a fast-moving product environment. What you'll get in return In return, you'll be joining a business where engineering excellence sits at the core of its success, offering the chance to work on genuinely cutting-edge technology in a role that blends leadership with hands-on development. The package includes a salary of up to £80,000, a 10% annual bonus, private healthcare and a strong range of wellbeing support. The working environment is collaborative and engaging, with modern offices and flexible working hours available. What you need to do now To find out more or to be considered, please apply directly or get in touch for a confidential discussion with Max Wilcock, Senior Business Director, 03330105724. At Hays Technology, we're shaping the future of recruitment. As demand for specialist engineering talent continues to grow, we work closely with organisations and individuals to create opportunities where people can make a real impact. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk TPBN1_UKTJ

CONTRACTS ADMINISTRATOR HAVANT SALARY UP TO £40K Our client is a successful and well-respected civil engineering contractor, currently delivering a number of exciting, large infrastructure projects and with ambitious growth plans in place. They are seeking a Contracts Administrator to work on a major infrastructure project near Portsmouth. The Contracts Administrator will assist the Contract Manager with the contract administration on this project, and the role will cover a broad spectrum of contract related matters including programme, change and risk management, dispute avoidance and procurement. Applicants may already be working in a similar role or perhaps be a Graduate in Quantity Surveying, Law or Business Studies. The Contracts Administrator responsibilities include but are not limited to; Assisting with: • Legal agreements relating to Licenses & Consents, Surety’s and Bonds, • Insurances & Warranties, • Proposed agreements and documents to ensure they reflect agreements reached, • Management of the change process (Compensation Events) ensuring deadlines are met, • Drafting correspondence, • Management of contractual matters with supply chain partners as and when required, • Liaison with clients’ and statutory providers’ legal representatives and engaging with our own legal counsel when necessary, • Review the contract and draft advice notes setting out the contract requirements and make proposals for responses and compliance Responsible for: • Arranging and attending meetings and negotiations, taking notes, issuing minutes and actions, • Administration of the contract communications system, • Producing reports and supporting information as directed, • Required qualifications, skills, experience Qualifications/Skills: • Similar experience or Degree/HND qualification, • Full driving licence, • GCSE Maths & English, • Strong IT skills; Microsoft, Word, Excel and Outlook Company Benefits; • Salary £28k - £40k depending on experience, • 25 days annual leave, • Pension match up to 10% Run Resourcing Ltd acts solely as a recruitment intermediary and does not guarantee the accuracy, completeness, or reliability of any information provided by the hiring company. Run Resourcing Ltd is committed to equal employment opportunities and does not discriminate based on race, colour, religion, gender, sexual orientation, age, national origin, disability, or any other protected status

CONTRACTS ADMINISTRATOR HAVANT SALARY UP TO £40K Our client is a successful and well-respected civil engineering contractor, currently delivering a number of exciting, large infrastructure projects and with ambitious growth plans in place. They are seeking a Contracts Administrator to work on a major infrastructure project near Portsmouth. The Contracts Administrator will assist the Contract Manager with the contract administration on this project, and the role will cover a broad spectrum of contract related matters including programme, change and risk management, dispute avoidance and procurement. Applicants may already be working in a similar role or perhaps be a Graduate in Quantity Surveying, Law or Business Studies. The Contracts Administrator responsibilities include but are not limited to; Assisting with: • Legal agreements relating to Licenses & Consents, Surety’s and Bonds, • Insurances & Warranties, • Proposed agreements and documents to ensure they reflect agreements reached, • Management of the change process (Compensation Events) ensuring deadlines are met, • Drafting correspondence, • Management of contractual matters with supply chain partners as and when required, • Liaison with clients’ and statutory providers’ legal representatives and engaging with our own legal counsel when necessary, • Review the contract and draft advice notes setting out the contract requirements and make proposals for responses and compliance Responsible for: • Arranging and attending meetings and negotiations, taking notes, issuing minutes and actions, • Administration of the contract communications system, • Producing reports and supporting information as directed, • Required qualifications, skills, experience Qualifications/Skills: • Similar experience or Degree/HND qualification, • Full driving licence, • GCSE Maths & English, • Strong IT skills; Microsoft, Word, Excel and Outlook Company Benefits; • Salary £28k - £40k depending on experience, • 25 days annual leave, • Pension match up to 10% Run Resourcing Ltd acts solely as a recruitment intermediary and does not guarantee the accuracy, completeness, or reliability of any information provided by the hiring company. Run Resourcing Ltd is committed to equal employment opportunities and does not discriminate based on race, colour, religion, gender, sexual orientation, age, national origin, disability, or any other protected status

BAE Systems ref: V05895 Title: Senior Design Engineer - Mechanical/Piping 12 month contract £42.08 per hour Umbrella - Inside IR35 2 days per week onsite - BAE Systems Portsmouth Role Description To undertake a defined range of detail design activities in line with all relevant processes and quality requirements of Mechanical/Piping design package and reports for Installation solutions on Legacy Warships, supplying advice and support to operations and other functions and/or to organise and co-ordinate aspects of detail design activity ensuring defined objectives are achieved whilst continually maintaining quality and service requirements. Core Duties (GTI Description) Typical duties include (but are not limited to): (suggested 5-10 bullets/statements, indicative of the role at this level) · Support the development of best practice to increase the capability, performance of tools and processes · Support the developing, maintaining and modifying engineering processes and procedures in assigned areas in response to technical developments and operational need · To identify training requirements, skills gaps and development requirements of own discipline. · Undertake task verification/checking of other Design Engineer's work as directed by Principal Engineering Manager. · To lead and conduct ship trials, surveys and engineering support activities. · Undertake estimating of mechanical elimates of the tasks. Support the developing, maintaining and modifying engineering processes and procedures in assigned areas in response to technical developments and operational need · Produce and develop complex designs in line with specifications and all quality and technical standards, and carry out detail design appraisals in assigned areas to ensure all standards are maintained, taking due cognisance of design for production · Carry out investigations into operational problems or developments and develop and prepare solutions, individually or as a member of a design team · Support the development of best practice to increase the capability, performance of tools and processes · To identify training requirements, skills gaps and development requirements of own discipline · Undertake task verification/checking of other design engineer's work as directed by principal engineering manager · To lead and conduct ship trials, surveys and engineering support activities Additional Key Accountabilities: · Keep up to date in relevant technical areas, develop skills and capabilities to be able to provide more effective services (seeking and sharing good practice and knowledge to continuously improve practices), and supply technical support and expertise to others as required. · Provide help and direction to less experienced team members to support both their effective working and their development. · Manage assigned budgets and lead, develop and motivate assigned employees to ensure they are aware of and capable of delivering their accountabilities. · Make engineering decisions within own sphere of responsibility and delegated authority. · Compile accurate estimates. · Compile statements of Works (SOW,s) on behalf of customer when required. Safety: (For an individual contributor – include the statement below) § The role holder is responsible for taking reasonable care of their own health and safety ensuring high standards for safety, health and environment (SHE) in our organisation are maintained. This includes co- operating and following all reasonable instruction, information and training reporting work-related hazards or incidents and using all equipment for the purpose intended. More detailed responsibilities are captured within the Company Health & Safety Policy (759/OF/016) and the Company Environmental Policy (759/OF/029). Knowledge, Skills and Qualifications (GTI Qualification requirements) Knowledge: (Recommended max 5 bullets/statements) § Possesses in-depth knowledge and design experience of all aspects within Mechanical/Piping Disipline using AutoCAD/Inventor. § Able to perform robust analysis using recognised draughting and analytical tools and to make sound judgements based on experience. § Has sufficient breadth of knowledge of warship design and the sound judgement needed to be able make correct trade- off decisions § Provide technical support and troubleshooting responses in assigned areas to operational units or other activities. § Requires an understanding of how activities of own team interrelates and interacts with other functional areas aligned to the same contract or project. § Understands in detail the technical specification aligned to the functional area of activity. Can manage requirements and identify scope change. § A full understanding of the external environment including the MoD structure and their engineering processes. § Can apply the relevant Business processes to developing their outputs Skills: (Recommended max 5 /statements) § Requires very strong communication, diplomacy and interpersonal skills. Communication will be both internal and external and will include a regular interface with external providers and customers both informally and at meetings these dealings will affect the reputation of Design Services. § Is required to influence, guide and convince others to adopt a particular course of action. § Required to exchange complex engineering design information at Design Reviews. AutoCAD/Inventor design experience and in addition to this, having the ability to produce detailed manufacturing & assembly drawings § An understanding of detailed system and technical engineering drawings including manufacturing drawings with knowledge of projection layouts, scaling & tolerancing § Knowledge of ship system engineering drawings such as diagrammatic, piping isometrics and also ship systems materials and equipment (symbols) § Knowledge of maritime warship/commercial systems i.e. fluid based systems, Mechanical systems. and able to perform, as a minimum, basic pressure loss and flow calculations, with a view to sizing pipework in designs § Understanding of naval ships commercial mechanical/piping systems for various classes of vessel § HND/HNC in a Mechanical discipline Qualifications: (Specify only as appropriate, or say ‘none specified.' Where a qualification is listed, please indicate whether it is ‘Expected or Preferred.') · Min HND/HNC Qualification in Mechanical /Piping Discipline or extensive industrial experience. TPBN1_UKTJ

My Leading FinTech client are looking for a talented and motivated Supply Chain Operations Manager to build a strong working relationship with their network of repair and fulfilment vendors to deliver a best-in-class service while identifying and enabling operational improvements and expanding their

We’re looking for a Customer Supply Chain Manager – EMEA to join Monster Energy’s Operations team. Working closely with Supply Planning, Logistics, Commercial, Finance, and Manufacturing teams. Experience within customer supply chain, export operations, customer operations, logistics, or inter

As Business Development Manager, you will be responsible for creating, building and converting a structured commercial pipeline across retail supply chains. RAS Supply Chain Integrity is the recognised global authority in stock integrity audit and supply chain stock compliance. Develop new relations