Trabajos 2nd shift en Dallas, TexasCrear alertas

Location: Main Hospital Bldg - 2nd Floor Primary Purpose Performs CT scan procedures efficiently, effectively, and as ordered by physicians in order to provide optimal patient care. This position is eligible for a sign on incentive. The projected shift for this position is Tuesday, Thursday, Friday 10 am to 10:30 pm and evening time shift differentials will apply. MINIMUM SPECIFICATIONS Education Graduate of an accredited Commission on Accreditation of Allied Health Education Programs (CAAHEP) radiography program. Experience Prefer experience performing Radiology procedures but all experience levels will be considered. Equivalent Education and/or Experience Equivalent education that is recognized and accepted by the American Registry of Radiologic Technologists (ARRT) to be eligible to sit for the ARRT(R) and advanced ARRT credential exams. Certification/Registration/Licensure • Must have an American Registry of Radiologic Technologists (R)(ARRT)., • Must have Advanced Registry in Computed Tomography (R)(CT)(ARRT) or obtain within twelve months of hire., • Must have a Medical Radiologic Technologist (MRT) certification from Texas Department of State Health Services (TDSHS) or Texas Medical Board., • Must have a current Healthcare Provider (BLS level) CPR course completion card prior to hire and/or placement in job from one of the following:, • American Heart Association, • American Red Cross Rescuer Responsibilities Performs basic and complex computerized tomography (CT) as ordered by physicians, ensuring procedures are done according to Parkland, state, and regulatory standards. Demonstrates independent judgment, critical thinking, and problem solving skills as needed. Accesses and handles selected medications and administers contrast. Follows established imaging protocols. Reads and interprets protocols, manipulates equipment controls accordingly, operates equipment, consults with the radiologist as needed to meet the radiographic needs of the patient. Identifies supply needs, monitors expiration dates of all supplies and takes appropriate action. Participates in all aspects of The Joint Commission Continual Readiness. Participates in departmental Performance Improvement Programs, understands 'CIRCLES' and its relationship to the work environment, attends department and modality meetings satisfactorily. Performs other duties as assigned. Job Accountabilities Identifies ways to improve work processes and improve customer satisfaction. Makes recommendations to supervisor, implements, and monitors results as appropriate in support of the overall goals of the department and Parkland. Stays abreast of the latest developments, advancements, and trends in the field by attending seminars/workshops, reading professional journals, actively participating in professional organizations, and/or maintaining certification or licensure. Integrates knowledge gained into current work practices. Maintains knowledge of applicable rules, regulations, policies, laws and guidelines that impact the area. Develops effective internal controls designed to promote adherence with applicable laws, accreditation agency requirements, and federal, state, and private health plans. Seeks advice and guidance as needed to ensure proper understanding. Requisition ID: 985882

Location: Main Hospital Bldg - 2nd Floor Primary Purpose Responsible for acquiring quality diagnostic radiographic images for all diagnostic imaging procedures in assigned area of Radiology to provide optimal patient care. Minimum Specifications Education Must be a graduate of an accredited Radiology Program. Experience None Equivalent Education and/or Experience Equivalent education that is recognized and accepted by the American Registry of Radiologic Technologists (ARRT) to be eligible to sit for the ARRT(R) credential exam. Certification/Registration/Licensure Must have American Registry of Radiologic Technologists (ARRT) with certification in Radiologic Technology. Must have a Texas Department of State Health Services (TDSHS) - Medical Radiologic Technologist (MRT) certification 6 months of hire. Must have a current Healthcare Provider (BLS Level) CPR course completion card upon hire. Accepted sources include: American Heart Association American Red Cross Rescuer Military Training Network Skills or Special Abilities Must be able to demonstrate time management, organizational, and interpersonal skills. Must be able to demonstrate oral and written communication skills. Must be able to demonstrate knowledge of Radiologic equipment. Must be able to demonstrate patient centered/patient valued behaviors. Responsibilities 1. Responsible for production quality radiographs of basic and complex exams/procedures, while adapting procedures and technical factors in relation to patient conditions and history. Participates in quality review program. Responsible for understanding and adhering to radiation safety regulations and infection control standards established by Parkland and accreditation agencies to ensure that Radiologic procedures are carried out safely., 2. Utilizes technical knowledge and skills to perform procedures accurately and in a timely manner in accordance with age specific criteria. Completes exam charges and image documentation in a timely manner. Administers contrast material in the correct dosage, route and observes patients for adverse reactions. Enters accurate patient exam data into the electronic health record. Responsible for equipment, supplies, and room preparation in order to ensure appropriate set-up before each procedure., 3. Interviews patient (two patient identifier), conducts patient screening (when applicable) and obtains medical history pertaining to procedures clinical criteria. Explains procedure and instructs patient on necessary requirements needed to provide diagnostic images. Answers questions/screening concerning procedures and contrast for relevant exams. Assists the physician as needed in performing procedures. Ensures that images and records are properly completed with patient identification data and appropriate labeling., 4. Maintains equipment including running quality assurance checks and notifying supervisor of maintenance needs. Maintains a record of quality assurance tests to ensure that equipment runs efficiently and effectively. Maintains all passwords to each computer system. Promptly reports equipment malfunctions to supervisor or the appropriate engineering department., 5. Transports patients to and from radiographic area as needed and consults with physicians or other healthcare providers regarding x-ray orders, performed procedures, and protocol to ensure that radiographic needs are met., 6. Participates in departmental Performance Improvement Programs, promotes Parkland Health mission, vision, values, and its relationship to the work environment, attends modality meetings satisfactorily. Functions in the department as part of an interdisciplinary team and collaborates in the care and service delivery process of patient care through effective communication with other service lines. Prioritizes exams with scheduling exams to ensure smooth workflow, minimize wait times and address stat and urgent requests., 7. Responds to inquiries, calls, emails in a timely and professional manner. Communicates shift hand off regarding workflow issues with equipment or pending exams with oncoming staff. Engages in equitable distribution of departmental workloads. Serves as a resource and role model to other staff and team members., 8. Takes responsibility for own professional growth and development by maintaining ARRT and State licensure. Completes mandatory Parkland training. Integrates knowledge gained into current work practices., 9. Serves as a patient advocate by consistently demonstrating proactive customer service skills and compliance with Parkland Mission, Vision, and Values., 10. Serves as a resource and role model to other staff, team members, and students with training, engagement and positive motivation. May serve as the Technologist in charge for supervising departmental operations. Job Accountabilities 1. Identifies ways to improve work processes and improve customer satisfaction. Makes recommendations to supervisor, implements, and monitors results as appropriate in support of the overall goals of the department and Parkland., 2. Stays abreast of the latest developments, advancements, and trends in the field by attending seminars/workshops, reading professional journals, actively participating in professional organizations, and/or maintaining certification or licensure. Integrates knowledge gained into current work practices., 3. Maintains knowledge of applicable rules, regulations, policies, laws and guidelines that impact the area. Develops effective internal controls designed to promote adherence with applicable laws, accreditation agency requirements, and federal, state, and private health plans. Seeks advice and guidance as needed to ensure proper understanding. Requisition ID: 975284

Location: Main Hospital Bldg - 2nd Floor This position is accountable for performing quality CT Scan Imaging through the application of advanced technical knowledge while adhering to the standards set by Parkland Health and appropriate regulatory agencies. Minimum Specifications Education Graduate of an accredited Radiology and/or Computed Tomography (CT) Program. Experience Prefer two (2) years of experience performing Radiology procedures but all experience levels will be considered. Equivalent Education and/or Experience Equivalent education that is recognized and accepted by the American Registry of Radiologic Technologists (ARRT) to be eligible to sit for the ARRT(R) and advanced ARRT credential exams. Certification/Registration/Licensure Must have current American Registry of Radiologic Technologists (ARRT) with certification in Radiography (R) and/or Computed Tomography (CT). If hired with ARRT (R) only, certification in CT is required within 1 year from the date of hire. Must have a Medical Radiologic Technologist (MRT) certification from Texas Department of State Health Services (TDSHS) or Texas Medical Board. Must have a current Healthcare Provider (BLS level) CPR course completion card from one of the following: American Heart Association American Red Cross Rescuer Military Training Network Skills or Special Abilities • Must be able to demonstrate knowledge of CT equipment., • Must be able to demonstrate knowledge of Anatomy and Physics., • Must possess a working knowledge of computer software applications., • Must be able to demonstrate oral and written communication skills., • Must be able to demonstrate time management, organizational, and interpersonal skills. 1. Responsible for performing computerized tomography (CT) procedures on assigned patients to ensure that scanning needs are met. Review physician orders and applicability to the CT protocol. Screen patients for safety and review any contraindications for exams, which would prohibit or modify the CT exam. If modification of a CT protocol is necessary consult with radiologist to determine appropriate parameters, etc. and document changes as appropriate in electronic health record. Prioritizes exams with scheduling exams to ensure smooth workflow, minimize wait times and address stat and urgent requests. Ensure other resources have been scheduled accordingly., 2. Interviews patient (two patient identifier), conducts patient screening and obtains medical history pertaining to procedures clinical criteria. Explains procedure and instructs patient on necessary requirements needed to provide diagnostic images. Answers questions/screening concerning procedures and IV contrast for relevant exams. Assists the physician as needed in performing procedures. Ensures that images and records are properly completed with patient identification data and appropriate labeling., 3. Utilizes technical knowledge and skills to perform procedures accurately and in a timely manner in accordance with age specific criteria. Completes exam charges and image documentation in a timely manner. Administers contrast material in the correct dosage, route and observes patients for adverse reactions., 4. Performs post processing as indicated; may include but not limited to, 3-D rendering. Maintains patient confidentiality and ensures that all processes and procedures are maintained to secure and protect all workstations in all work areas. Identifies supply needs, monitors expiration dates of all supplies and takes appropriate action., 5. Responds to inquiries, calls, emails in a timely and professional manner. Communicates shift hand off regarding workflow issues with equipment or pending exams with oncoming staff. Engages in equitable distribution of departmental workloads., 6. Participates in departmental Performance Improvement Programs, promotes Parkland Health mission, vision, values, and its relationship to the work environment, attends modality meetings satisfactorily. Functions in the department as part of an interdisciplinary team and collaborates in the care and service delivery process of patient care through effective communication with other service lines., 7. Maintains equipment including running quality assurance checks and notifying supervisor of maintenance needs. Maintains a record of quality assurance tests to ensure that equipment runs efficiently and effectively. Maintains all passwords to each computer system. Participates in all aspects of The Joint Commission Continual Readiness., 8. Takes responsibility for own professional growth and development by attending seminars, reading appropriate articles relative to the job, and maintaining ARRT certification and integrates this knowledge into the job as appropriate to ensure an optimal level of education., 9. Maintains knowledge of applicable rules, regulations, policies, laws, and guidelines that impact the CT area. Develops effective internal controls that promote adherence to applicable state/federal laws, and the program requirements of accreditation agencies and federal, state, and private health plans. Seeks advice and guidance as necessary to ensure proper understanding. Job Accountabilities 1. Identifies ways to improve work processes and improve customer satisfaction. Makes recommendations to supervisor, implements, and monitors results as appropriate in support of the overall goals of the department and Parkland., 2. Stays abreast of the latest developments, advancements, and trends in the field by attending seminars/workshops, reading professional journals, actively participating in professional organizations, and/or maintaining certification or licensure. Integrates knowledge gained into current work practices., 3. Maintains knowledge of applicable rules, regulations, policies, laws and guidelines that impact the area. Develops effective internal controls designed to promote adherence with applicable laws, accreditation agency requirements, and federal, state, and local requirements. Requisition ID: 990628

Location: RJA Clinic: 2nd FLR BLK 700 Primary Purpose Responsible for performing routine to complex quality images in at least two different modalities on a routinely scheduled basis. Must be registered in DEXA either from ARRT or ISCD. Shift is Monday through Friday, 7a-330p Must have one (1) year of DEXA experience per the job description. Minimum Specifications Education Must be a graduate of an accredited imaging program for their primary pathway. Examples: • Magnetic Resonance Imaging, • Nuclear Medicine Technology, • Radiography, • Sonography Must have at least 1 year imaging experience for each certified modality. Certification/Registration/Licensure Must have a Medical Radiologic Technologist (MRT) certification from Texas Department of Health or Texas Medical Board (not applicable to MR, S, or VS). Must be credentialed through ARRT, RDMS and/or CNMT. Must possess two or more imaging subspecialties: • Bone Densitometry (BD) or Certified Bone Densitometry Technologist (CBDT®) accredited by the National Commission for Certifying Agencies (NCCA), • Breast Sonography (BS), • Cardiovascular Interventional Radiography (CV), • Computed Tomography (CT), • Magnetic Resonance Imaging (MR), • Mammography (M), • Nuclear Medicine Technology (N), • Radiography (R), • Sonography (S), • Vascular Interventional Radiography (VI) American Heart Association American Red Cross Rescuer Military Training Network Skills or Special Abilities • Must be able to demonstrate time management, organizational and interpersonal skills., • Must be able to demonstrate oral and written communication skills., • Must be able to demonstrate advanced computer skills., • Must be able to demonstrate routine to complex positioning ability to achieve images which meet quality criteria., • Must be able to communicate effectively with patients, visitors and hospital staff., • Must be able to demonstrate patient centered/patient valued behaviors. Requisition ID: 986059

Location: Main Hospital Bldg - 2nd Floor Primary Purpose This position is accountable for performing quality Magnetic Resonance Imaging through the application of advanced technical knowledge while adhering to the standards set by Parkland Health and appropriate regulatory agencies. Friday 07:00 to 19:30 Sunday 19:00 to 07:30 Monday 19:00 to 07:30 Night time shift differentials will apply. Minimum Education Graduate of an accredited Radiology and/or MRI Program. Experience • Must have 6 months clinical experience in Magnetic Resonance Imaging (MRI)., • If not currently licensed with American Registry of Radiologic Technologists (ARRT) with a certification in MRI (MR); you must have taken courses in MRI: physics, cross sectional anatomy, and clinical experience., • Must have current American Registry of Radiologic Technologists (ARRT) with certification in MRI (MR) within 6 months of hire., • If not ARRT (MR) certified, must possess American Registry of MRI Technologists (ARMRIT) upon hire and obtain ARRT(MR) within 6 months of hire., • Must have a current Healthcare Provider (BLS Level) CPR course completion card prior to hire and/or placement in job from one of the following:, • American Heart Association, • American Red Cross Rescuer, • Military Training Network, • Must be able to complete 6-month on-the-job training for those obtaining ARRT-MRI certification., • Must be able to demonstrate knowledge of MRI equipment., • Must be able to demonstrate knowledge of Anatomy and Physics., • Must be able to demonstrate computer skills in both word processing and data-base software., • Must be able to demonstrate oral and written communication skills., • Must be able to demonstrate time management, organizational, and interpersonal skills. 1. Responsible for performing computerized magnetic resonance imaging (MRI) procedures on assigned patients to ensure that scanning needs are met, including all neuro, body and musculoskeletal exams. Review physician orders and applicability to the MRI protocol. Screen patients for MRI safety and review any contraindications for exams including but not limited to implants, metallic devices, or other foreign objects, which would prohibit or modify the MRI exam. If modification of a MRI protocol is necessary consult with radiologist to determine appropriate sequences, parameters, etc. Document changes as appropriate in electronic health record. Ensure other resources have been scheduled accordingly., 2. Interviews patient (two patient identifier), conducts patient screening and obtains medical history pertaining to procedures clinical criteria. Explains procedure and instructs patient on necessary requirements needed to provide diagnostic images. Answers questions/screening concerning procedures and IV contrast for relevant exams. Assists the physician as needed in performing procedures. Ensures that images and records are properly completed with patient identification data and appropriate labeling., 3. Utilizes technical knowledge and skills to perform procedures accurately and in a timely manner in accordance with age specific criteria. Completes exam charges and image documentation in a timely manner. Administers contrast material in the correct dosage, route and observes patients for adverse reactions., 4. Performs post processing on MRI systems and remote workstations. May include but not limited to, 3-D rendering, and calculation of T1 and T2 values. Maintains patient confidentiality and ensures that all processes and procedures are maintained to secure and protect all workstations in all work areas., 5. Responds to inquiries, calls, emails in a timely and professional manner. Communicates shift hand off regarding workflow issues with equipment or pending exams with oncoming staff. Engages in equitable distribution of departmental workloads., 6. Participates in departmental Performance Improvement Programs, promotes Parkland Health mission, vision, values, and its relationship to the work environment, attends modality meetings satisfactorily. Functions in the department as part of an interdisciplinary team and collaborates in the care and service delivery process of patient care through effective communication with other service lines. Prioritizes exams with scheduling exams to ensure smooth workflow, minimize wait times and address stat and urgent requests., 7. Maintains equipment including running quality assurance checks and notifying supervisor of maintenance needs. Maintains a record of quality assurance tests to ensure that equipment runs efficiently and effectively. Maintains all passwords to each computer system., 8. Takes responsibility for own professional growth and development by attending seminars, reading appropriate articles relative to the job, and maintaining ARRT, and/or ARMRIT certification and integrates this knowledge into the job as appropriate to ensure an optimal level of education., 9. Maintains knowledge of applicable rules, regulations, policies, laws, and guidelines that impact the MRI area. Develops effective internal controls that promote adherence to applicable state/federal laws, and the program requirements of accreditation agencies and federal, state, and private health plans. Seeks advice and guidance as necessary to ensure proper understanding. Job Accountabilities 1. Identifies ways to improve work processes and improve customer satisfaction. Makes recommendations to supervisor, implements, and monitors results as appropriate in support of the overall goals of the department and Parkland., 2. Stays abreast of the latest developments, advancements, and trends in the field by attending seminars/workshops, reading professional journals, actively participating in professional organizations, and/or maintaining certification or licensure. Integrates knowledge gained into current work practices., 3. Maintains knowledge of applicable rules, regulations, policies, laws and guidelines that impact the area. Develops effective internal controls designed to promote adherence with applicable laws, accreditation agency requirements, and federal, state, and private health plans. Seeks advice and guidance as needed to ensure proper understanding. Requisition ID: 994480

Company Description Smiths Interconnect, is a global leader in the design and manufacture of high-performance interconnect solutions. Our products are used in mission-critical applications across industries such as aerospace, defense, telecommunications, and industrial markets. At Smiths Interconnect, we are committed to innovation, quality, and providing cutting-edge solutions that connect the world's most demanding systems. Smiths Interconnect is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, to help create a safer, more efficient and productive, and better-connected world across four global markets: energy, security & defense, space & aerospace and general industrial. Listed on the London Stock Exchange, Smiths employs c.16,000 colleagues in over 50 countries. Job Description Responsibilities: • Setup and operation of Fanuc & HAAS CNC milling centers using Master CAM software. • Utilize blueprints, sketches, drawings, specifications, or sample parts to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements., • Work to close tolerances using required gauges and inspection knowledge., • Document information pertaining to setup and operation of each job utilizing written descriptions, sketches and/or photos., • Train junior operators/apprentices., • Perform other tasks as assigned. Qualifications Technical Knowledge, Skills and Abilities: • 3-7 years of manual machining and CNC setup and operation utilizing conversational programming., • Proficiency in Master CAM software preferred, • Must have a high work ethic, be a team player and work with a since of urgency., • Ability to read and comprehend complex machine and component drawings., • Ability speak/read English and understand verbal instructions., • Ability to analyze and solve problems., • Detailed oriented, self-motivated, ability to work well with limited supervision., • Ability to train others., • Ability to work overtime and on weekends as needed for the position. Travel %: 0-10% Security: Please State if US Citizen or permanent Resident Required Additional Information All your information will be kept confidential according to EEO guidelines. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation - including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career's website (Careers - Smiths Group plc)

Job Description Production Lead 2nd Shift Essential Functions • Assigns line worker to position and instructs on daily production requirements., • Monitors product in process, adjust work schedule, supplies materials and check equipment when necessary., • Notify QC to check batch before start-up throughout daily output., • Store food products not used in their designated area and maintain a clean work area., • Verify that paperwork is done properly and reports down-time accurately., • Repairs machines or refer machine repairs to maintenance personnel., • Trains and supervises workers on department line., • Able to follow verbal instructions from Supervisor, • Handle multiple projects in a fast paced and limited timeframe while remaining detailed-orientation, reliable and organized, • Excellent communication skills, • Display strong leadership abilities, • Analytical skills and attention to diminutive details, • Previous production lead experience in a food manufacturing environment a plus

Job Description Garland Stainless Steel Manufacturing Company seeking an Entry Level Shop Helper Employment type: 2nd Shift-Full-Time (4) 10-hour days Monday-Thursday 3:15pm-1:45am Duties to include but not limited to the following: Cleaning, Organizing, Assisting as Needed, and other Daily Tasks to help keep Production Processes Opportunities to advance into production roles as needed Ideal Candidate will be motivated and stay on task Job Qualifications: Experience is a plus but not a requirement Bilingual Candidates (English/Spanish) is a PLUS, but not Mandatory. Candidate must be a Self-Starter, Motivated, and Dependable Compensation: $15 to $16 Hourly Depending on Experience Competitive wages, 401K, health insurance, Paid Vacation and Holidays, Bonus Programs and many other Perks. Weekends and OT as needed Please submit resume or reply detailing experience and providing salary history and contact information. Company DescriptionAFB Manufacturing is a growing 75+ year old family-owned company. AFB Manufacturing is an industry leader in our niche market, serving multi-billion dollar companies all over the world. Our specialty protects us from imports, so our team members have no job insecurity relating to offshore competition. We expanded our Garland, Texas manufacturing facility and capacity multiple times in the past 10+ years and the only thing we need are people who care about the quality of their work and want to learn and develop new skills as needs arise.AFB Manufacturing is a growing 75+ year old family-owned company. AFB Manufacturing is an industry leader in our niche market, serving multi-billion dollar companies all over the world. Our specialty protects us from imports, so our team members have no job insecurity relating to offshore competition. We expanded our Garland, Texas manufacturing facility and capacity multiple times in the past 10+ years and the only thing we need are people who care about the quality of their work and want to learn and develop new skills as needs arise.

Digital Press Operator (HP Digital Press) Employment Type: Direct Hire Location: Dallas, TX Pay Rate: $22–$30/hour (based on experience) Schedule: • Monday–Thursday, 10-hour shifts, • Primary Shift: 2nd Shift (4:00 PM – 2:30 AM), • Training: Approximately 8 weeks on 1st Shift (6:00 AM – 4:30 PM, Monday–Thursday), • Overtime may be available as needed Job Summary Wheeler Staffing Partners is seeking an experienced Digital Press Operator to produce high-quality printed labels that meet customer specifications and production standards. This role requires hands-on experience operating HP digital presses, strong attention to detail, and the ability to work independently in a fast-paced manufacturing environment. The ideal candidate will be comfortable working second shift after completing first-shift training. Key Responsibilities • Produce high-quality printed labels according to job specifications and customer standards, • Read and interpret job orders; load jobs into the press with correct primers, tint rollers, stock, counts, and color strategies, • Input accurate time, materials, and production data into job management software, • Start and operate digital press, verifying stock alignment, color calibration, sizing, and print quality, • Inspect printed materials for defects and make press adjustments as needed before and during production, • Adjust color to ensure accuracy of finished product; X-Rite / i1 table knowledge is a plus, • Cut and retain full samples from each printed job for ticket documentation and sample library, • Assist with finishing operations as needed, • Communicate job changes, issues, or delays to the supervisor promptly to minimize downtime, • Report press or production downtime issues in a timely manner, • Maintain accurate inventory usage records, • Perform daily, weekly, and monthly press maintenance, including basic technician part changes, • Maintain a clean, organized, and safe work area in accordance with housekeeping standards, • Participate in training programs as required, • Perform other duties as assigned Qualifications Education & Experience • High school diploma or GED required, • Minimum of 2 years of related experience and/or training, or an equivalent combination of education and experience, • At least 2 years of experience operating an HP digital press in a printing environment, • Strong understanding of digital press operations and color management, • Ability to read and interpret rulers, scales, and measurement devices, • Ability to stand and walk for extended periods, • Frequently lift and/or move up to 50 pounds, with or without mechanical assistance, • Visual requirements include close vision, color vision, depth perception, and ability to adjust focus Work Environment • Manufacturing/printing environment, • Exposure to moderate noise levels, • Requires adherence to safety and quality standards Why Work With Wheeler Staffing Partners Wheeler Staffing Partners connects skilled professionals with long-term, direct-hire opportunities that support career growth and stability. Our team provides consistent communication, professional support, and a people-first hiring experience.

Job Summary: Production Supervisor is responsible for leading and coordinating the activities of the production team to ensure efficient and high-quality production of plastic molded products. Responsible for maintaining a safe and productive work environment, meeting production targets, and ensuring adherence to quality standards. Job Duties & Responsibilities: Production Supervision and Leadership: • Lead and supervise a team of production operators in the day-to-day operations., • Provide guidance, training, and performance feedback to ensure a skilled and motivated workforce., • Provide technical support and assist in troubleshooting equipment issues., • Collaborate with Plant Manager to schedule optimized production runs and ensure on-time delivery of products., • Optimize production processes to achieve maximum efficiency and output. Quality Control: • Implement and enforce quality control standards to ensure that products meet specified criteria., • Monitor production processes and address any deviations from quality standards promptly. Process Improvement: • Identify opportunities for process improvement and implement changes to enhance efficiency and reduce waste., • Work closely with Manufacturing Engineer and Process Engineer to optimize tooling and mold processes. Environment, Health, and Safety: • Enforce safety protocols and ensure that all employees follow EH&S guidelines., • Conduct regular safety meetings and inspections to maintain a safe working environment. Equipment Maintenance: • Partner with maintenance team to ensure the timely maintenance and calibration of injection molding machines and related equipment., • Coordinate with the maintenance team to address any equipment malfunctions promptly. Documentation and Reporting: • Maintain accurate production records, including production reports, quality control data, and employee performance records., • Prepare and present regular reports on production performance and key metrics. Team Collaboration: • Collaborate with cross-functional teams, including engineering, quality assurance, and logistics, to achieve overall business objectives., • Foster a collaborative and positive work culture. Continuous Improvement: • Drive continuous improvement efforts to identify and eliminate waste, reduce cost, and improve quality. Job Qualifications: • AAS degree or related job experience, in a technical discipline; mechanical or manufacturing engineering preferred., • Proven experience as Production Supervisor or similar role, • Experience in using various types of manufacturing machinery and tools., • Organizational and leadership abilities, • Communication and interpersonal skills, • Self-motivated with a results-driven approach, • Must be legally authorized to work in the United States, • Must be able to lift to 50 lbs., • Strong computer skills, including proficiency with MS Office applications., • Strong multi-tasking skills. Completes several concurrent tasks in an efficient and accurate manner. Competencies: • Judgement - Displays willingness to make decisions; Exhibits sound and accurate judgment; Supports and explains reasoning for decisions; Includes appropriate people in decision-making process; Makes timely decisions., • Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics., • Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly., • Strategic Thinking - Develops strategies to achieve organizational goals; Understands organization's strengths & weaknesses; Analyzes market and competition; Identifies external threats and opportunities; Adapts strategy to changing conditions., • Technical Skills - Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others. PHYSICAL DEMANDS AND WORK ENVIRONMENT: Work is performed indoors in a manufacturing setting with regular exposure to cold, heat, noise, and moving machines and equipment. Must be able to lift to 50 lbs, push and pull up to 40 lbs, lift, stand and carry consistently, have proper hearing, vision, and speech capabilities. Can wear Personal Protective Equipment (PPE) (Hearing protection, safety glasses, goggles, or shields). The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities, or physical requirements. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

We are looking for a hands-on, mechanically inclined individual to join our.This role is ideal for someone who enjoys working with their hands, learning advanced manufacturing processes, and taking pride in doing things the right way.Operate a variety of fabrication equipment including punches, lase

Job Description Production Lab Technician Production Lab Technician experience is preferred but not required. We are willing to train. Job Description: The Lab Technician will be responsible for cutting, edging, and creating prescription lenses to ensure customers can receive their new prescription glasses in a timely manner. Once the glasses are complete, the Lab technician is responsible for taking the glasses to the retail floor so the glasses can be dispensed to the receiving patient. Other duties and responsibilities are listed below. Duties and Responsibilities: * Identify and work with basic optical laboratory equipment, tools, supplies, and materials * Consistently adhere to hourly deadlines for finishing jobs * Correctly read and interpret prescription specifications and input into computer properly to ensure lenses are cut properly * Maintain the lab area and equipment in a safe and organized manner * Perform daily, weekly and monthly lab equipment maintenance as scheduled and in accordance with lab/equipment manual specifications * Understanding of and ability to add and/or subtract positive and negative integers * Perform multiple concurrent tasks at several different equipment stations in order to maintain acceptable job flow * Read, comprehend and follow technical manuals and protocols * Fill out all assigned reporting forms in a timely manner * Read and interpret prescription specifications Education and Experience Requirements: * High School Diploma or GED * Experience working in a lab or technical setting * Experience working in the optical industry is preferred Skills and Abilities: * Ability to stand for prolonged periods of time (up to 8 hours per day per scheduled shift) * Ability to occasionally stoop, bend, kneel, crouch, reach, and twist * Ability to lift, carry, push, and/or pull up to approximately 45 lbs, on rare occasions aid in moving heavy lab equipment * Must possess excellent hand-eye coordination and fine motor skills * Ability to operate basic office equipment * Ability to communicate clearly and concisely, both orally and in writing * Ability to multi-task * Ability to identify and solve problems, and facilitate problem solving * Attention to detail * Time management skills - ability to prioritize and work quickly and efficiently when there are multiple customers to assist * Ability to deal with stressful situations such as dissatisfied customers * Ability to establish and maintain effective working relationships with fellow employees Working Environment: * Work is performed primarily in an optical laboratory setting * Environment often fast-paced, deadline oriented * May work alone in lab as necessary or with partner * Exposure to dusts, fumes, glass and/or plastic lens particulates, standard chemicals found in optical lab (some of which may be caustic), metal alloy (solid and melted), moderately high levels of noise, fluorescent lighting, cleaning agents and electrical energy * Will be working primarily with small manual tools (screwdriver, pliers, etc.), lenses and automated laboratory equipment

Pride Health is hiring a Lab Assistant to support our client’s medical facility based in Irving TX 75063. This is a 3-4-month assignment (Possibility of extension or conversion) opportunity and a great way to start working with a top-tier healthcare organization! Position Name: Technical Lab - Lab Assistant Pay rate: $18/hr -$19/hr Location: Irving, TX 75063 Duration: 4-months contract with possible extension Shift: 2nd shift/ Tues-Sat 2pm - 10:30pm Job Description: Job Summary: The Lab Assistant is responsible for performing various routine laboratory functions with precision and accuracy to support laboratory professionals and ensure efficient production. Key Responsibilities: • Sort and receive specimens in the department., • Prepare specimens at workstations for testing, including:, • Building worklists and aliquoting specimens., • Checking for clots and fibrin in specimens., • Inoculation and slide preparation., • Perform routine instrument maintenance on some lab equipment., • Prepare reagents and media as needed., • Conduct weekly radioactive wipe tests., • Change gas cylinders as required., • Quality Assurance & Safety Compliance:, • Resolve pending lists and locate missing samples., • Decontaminate work areas and dispose of biohazardous materials., • Follow all PPE requirements and adhere to safety regulations., • Maintain department records and files., • Record data, including temperature charts., • Utilize the laboratory computer system and PCs for lab operations., • Complete training and competency checklists as required. Pride Global and its affiliates, including Russell Tobin, Pride Health, Pride Now, and Pride One, offer eligible employees comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance and hospital indemnity), a 401(k)-retirement savings, life & disability insurance, an employee assistance program, identity theft protection, legal support, auto and home insurance, pet insurance, and employee discounts with some preferred vendors. As a certified minority-owned business, Pride Global and its affiliates - including Russell Tobin, Pride Health, and Pride Now - are committed to creating a diverse environment and are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, pregnancy, disability, age, veteran status, or other characteristics. Pride Health is Pride Global's healthcare staffing branch, providing recruitment solutions for healthcare professionals and the industry at large since 2010. As a minority-owned business that delivers exceptional service to its clients and candidates by capitalizing on diverse recruiting, account management, and staffing backgrounds, Pride Health's expert team provides tailored and swift sourcing solutions to help connect healthcare talent with their dream jobs.

Job Description * Job Summary: Production Supervisor is responsible for leading and coordinating the activities of the production team to ensure efficient and high-quality production of plastic molded products. Responsible for maintaining a safe and productive work environment, meeting production targets, and ensuring adherence to quality standards. Job Duties & Responsibilities: • ProductionSupervision and Leadership:, • Lead and supervise a team of production operatorsin the day-to-day operations., • Provide guidance, training, and performance feedback to ensure a skilled and motivated workforce., • Provide technical supportandassistin troubleshooting equipment issues., • Address mechanical, operational, and technical downtime issues within department., • Production Planning and Scheduling:, • Collaborate with Plant Manager to schedule optimized production runs and ensure on-time delivery of products., • Optimize production processes to achieve maximum efficiency and output. Quality Control: • Implement and enforce quality control standards to ensure that products meet specified criteria., • Monitor production processes and address any deviations from quality standards promptly. Process Improvement: • Identify opportunities for process improvement and implement changes to enhance efficiency and reduce waste., • Work closely with Manufacturing Engineer and Process Engineer to optimize tooling and mold processes. Environment, Health, and Safety: • Enforce safety protocols and ensure that all employees follow EH&S guidelines., • Conduct regular safety meetings and inspections to maintain a safe working environment. Equipment Maintenance: • Partner with maintenance team to ensure the timely maintenance and calibration of injection molding machines and related equipment., • Coordinate with the maintenance team to address any equipment malfunctions promptly. Documentation and Reporting: • Maintain accurate production records, including production reports, quality control data, and employee performance records., • Prepare and present regular reports on production performance and key metrics. Team Collaboration: • Collaborate with cross-functional teams, including engineering, quality assurance, and logistics, to achieve overall business objectives., • Foster a collaborative and positive work culture. Continuous Improvement: • Drive continuous improvement efforts to identify and eliminate waste, reduce cost, and improve quality. Job Qualifications: • AAS degree or related job experience, in a technical discipline; mechanical or manufacturing engineering preferred., • Proven experience as Production Supervisor or similar role, • Experience inusingvarious typesof manufacturing machinery and tools., • Organizational and leadership abilities, • Communication and interpersonal skills, • Self-motivated with a results-driven approach, • Must be legally authorized to work in the United States, • Must be able to lift to 50 lbs., • Strong computer skills, includingproficiencywith MS Office applications., • Strong multi-tasking skills. Completes several concurrent tasks in an efficient and accurate manner. Competencies: • Judgement- Displays willingness to make decisions; Exhibits sound and accurate judgment; Supports and explains reasoning for decisions; Includes appropriate people in decision-making process; Makes timely decisions., • Problem Solving-Identifiesand resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics., • Safety and Security-Observessafety and security procedures; Determinesappropriate actionbeyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly., • Strategic Thinking- Develops strategies to achieve organizational goals; Understands organization's strengths & weaknesses; Analyzes market and competition;Identifiesexternal threats and opportunities; Adapts strategy to changing conditions., • Technical Skills- Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Sharesexpertisewith others. PHYSICAL DEMANDS AND WORK ENVIRONMENT: Work is performed indoors in a manufacturing setting with regular exposure to cold, heat, noise, and moving machines and equipment. Must be able to lift to 50 lbs, push and pull up to 40 lbs, lift, stand and carry consistently, have proper hearing, vision, and speech capabilities. Can wear Personal Protective Equipment (PPE) (Hearing protection, safety glasses, goggles, or shields). The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities, or physical requirements. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description As the 2nd Shift Production Manager, you will lead a team of 20–40 employees in a fast-paced stainless steel fabrication and assembly plant. You are responsible for the daily management of production volume, quality, and safety across multiple departments. The ideal candidate is a hands-on leader who understands continuous improvement and is dedicated to seamless shift transitions. Schedule: Monday – Thursday | 3:00 PM – 2:00 AM (Enjoy a 3-day weekend!) Compensation: $85-100k Location: Garland, TX Key Responsibilities • Operational Leadership: Supervise all shop floor manufacturing operations, including Sheet Metal, Welding, Polishing, Assembly, Refrigeration, and Electrical departments., • Performance Management: Track and manage KPIs related to production volume, quality control, manufacturing costs, and safety metrics., • Shift Coordination: Maintain proactive, detailed communication with the 1st Shift Manager and Director of Manufacturing to ensure operational continuity., • Team Development: Train, evaluate, and discipline shop personnel; collaborate with leadership to resolve employee concerns and foster a professional culture., • Inventory & Logistics: Manage material shortages, maintain raw material inventory levels, and ensure all production paperwork is accurate and submitted on time., • Maintenance & Improvement: Address facility and equipment issues immediately; lead department-wide continuous improvement and corrective action initiatives., • Technical Oversight: Read blueprints/sketches to determine fabrication sequences and communicate required engineering changes or corrections to the Director of Manufacturing. Required Experience & Skills • Leadership: 5+ years of experience supervising 20–40 employees in a manufacturing environment., • Technical Expertise: Extensive hands-on experience in sheet metal fabrication and assembly is essential., • Material Knowledge: Solid understanding of material gauges and types (Stainless Steel, Galvanized, Aluminum, etc.)., • Machinery Proficiency: Complete understanding of CNC machines, including lasers, brake presses, tubing cutters, specialty saws, and routers., • Analytical Skills: Ability to interpret complex blueprints and troubleshoot part inconsistencies using precision measuring tools., • Tech Savvy: Proficient in MRP systems, Microsoft Excel, and Google Docs., • Language: Bilingual (English/Spanish) is a significant plus. Compensation & Benefits • Salary: Commensurate with experience., • Bonuses: Eligible for performance-based bonus programs., • Benefits: Comprehensive package including health, dental, and retirement options.Company DescriptionPrideStaff (North Dallas location) is a locally-owned staffing & placement firm with a strong reputation as a fun-loving, quality-focused service provider. Our employees enjoy the following: A professional, supportive team environment Representation to North Dallas’ top employers Full medical benefits package Dedicated consultants that provide industry insights & resources to ensure continued career development These are some of the many reasons we were recently recognized as one of Dallas’ Best Places to Work! Proudly serving North Dallas, Addison, Carrollton, Farmers Branch, Las Colinas, Irving, Coppell, Lewisville, Plano, Richardson, Frisco and McKinneyPrideStaff (North Dallas location) is a locally-owned staffing & placement firm with a strong reputation as a fun-loving, quality-focused service provider. Our employees enjoy the following:\n\nA professional, supportive team environment\n\nRepresentation to North Dallas’ top employers\n\nFull medical benefits package\n\nDedicated consultants that provide industry insights & resources to ensure continued career development\n\nThese are some of the many reasons we were recently recognized as one of Dallas’ Best Places to Work! \n\nProudly serving North Dallas, Addison, Carrollton, Farmers Branch, Las Colinas, Irving, Coppell, Lewisville, Plano, Richardson, Frisco and McKinney

Job Description Professional Packaging Systems (Pro Pac) is looking for individuals who have a strong professional ethic, are passionate about innovating for positive change, and are collaborative team players. We have been in business for over 50 years. Our success is due to a culture created by our founder that embodies these principles: Our employees are our most important asset, we stand by our word, and our customer’s needs are our number one priority. If you are looking for a career where you make a difference with over 1,000 team players, please read on. Sanitation Supervisor - 2nd Shift The Sanitation Supervisor - 2nd Shift ensures all cleaning and sanitizing activities in the facility are completed according to Master Cleaning Schedule (MCS), Customer requirements, Sanitation Standard Operating Procedure (SSOP), FDA FSMA Requirements, SQF and other 3rd party requirements. Shift/Time: 2nd Shift 4:30pm-12:30am ESSENTIAL DUTIES AND RESPONSIBILITIES • Facilitates the cleanliness and sanitizing of both food contact surfaces and non-food contact surfaces., • Documents and signs off all cleaning activities and ensures cleaning meets requirements, • Knowledge of different sanitation chemicals, • 7 Mitigate Environmental results as needed, • Liaison with Chemical Supplier, • Performs all activities on Master Sanitation Schedule (MSS) following all relevant standard operation procedures., • Knowledge of different sanitation chemicals Change to Knowledge of cleaning and sanitizing chemicals, • Implement 7 step cleaning methodologies, 7 Step Process of cleaning both wet and dry., • Ensures all lines and zones are cleaned, sanitized, disinfected passed inspection, • Ensures ATP, allergen test and visual inspections pass after cleaning, at an acceptable level., • Ensure all lines and zones are cleaned, pass inspection, and sanitize meeting company and regulatory requirements, • Performs visual inspection, ATP swabs, micro swabs, and allergen testing, • Keeps track of daily cleaning requirements according to production schedule and assigns daily activities to sanitation technicians, • Supports SQF certification activities relating to sanitation and documentation, • Monitors sanitation personnel activities and tracks work times and duties completed, • Keeps all areas in the facility including outside grounds cleaned using the Master Cleaning schedule and as cleaning needs arise, • Follows all Standard Sanitation Operational Procedures (SSOP), • Ensures all safety rules are followed during the sanitation process including making sure to follow Lock-Out-Tag-Out (LOTO), • Helps with safety, food safety, Food Defense, Food Fraud, OSHA safety and other sanitation monitoring and reporting activities, • Performs light mechanical activities such as disassembling and assembling food contact parts of the equipment, • Uses power wash and compressed air to clean where appropriate, • Follows all cross contamination and allergen, Organic and Gluten-Free protocols, • Ensures all lines and zones are cleaned, sanitized, disinfected passed inspection, • Ensures ATP, allergen test and visual inspections pass after cleaning, at an acceptable level., • Experienced with cleaning bloodborne pathogen, bodily fluids, glass and chemical spillages, • Performs other duties as assigned. SUPERVISORY RESPONSIBILITIES Yes QUALIFICATIONS: General: • Excellent attention to details, • Works well with little or no supervision, • Experience with liquid fill process and machinery, • Experienced with cleaning-out-of-place (COP) and cleaning-in-place (CIP), • Works well in a team environment, • Maintains a high level of business courtesy and etiquette when interacting with supervisors, managers, and other employees, • Demonstrated time management and multitasking skills, • Willingness to work more hours as necessary, • Experienced with product testing such as: PH, titratable acidity, solids, salt and viscosity, • Bilingual in Spanish not needed but desired, • Authorized to work in the U.S., • 2 years manufacturing wet/dry cleaning experience, • Knowledge of basic cleaning, disinfecting, and sanitizing, • General knowledge of production and packaging equipment, tools, and machines, • Associate degree or High school diploma/GED, • Ability to work in wet, cold, or hot environment, • Ability to lift 75 lbs. or more, • Knowledge and ability to use scissor lift, pallet jack and floor scrubber, • Ability to solve basic math, adding and subtracting, • Ability to solve problems independently, • None needed WORKING CONDITIONS: • Indoors and outdoors, use of chemicals such as sanitizers and degreasers. Wet environment and physical activity which includes climbing, lifting, bending, and standing for extended periods of time. About Pro Pac and Qual Pac Founded in 1971, Professional Packaging Systems (Pro Pac) brings deep knowledge and expertise to provide the best packaging solutions for our customers. We serve every industry, including e-commerce, retail and wholesale food, snack, beverage, specialty manufacturing, fresh produce, hobby and craft, automotive, electronics, pet, cosmetic industries, and many more. We are headquartered in Grand Prairie, Texas, with regional sales branches in El Paso, and Brownsville, TX; and additional contract packaging / fulfillment operations in Brookshire, TX; Charlotte, NC; and Olathe, KS. Come join a growing group of honest, knowledgeable, and skilled professionals who are dedicated to offering superior products and services to those we serve! Visit us at .

Do you have a strong work ethic and the desire to join an organization that invests in its people through cross-training and development? ClarkDietrich fosters a work-life balance and offers competitive compensation and benefits. Join the ClarkDietrich team by applying to the Maintenance Mechanic position at our Dallas, TX location. SUMMARY • The overall role of a Mechanic is to ensure that all machines and equipment in the facility are working properly and safe to operate., • They perform preventative maintenance on all equipment to minimize machine down time. ESSENTIAL DUTIES AND RESPONSIBILITIES, • Ensure that all machines and equipment in the facility are working properly and safe to operate., • Must be able to troubleshoot, diagnose and repair the equipment., • Must be able to build gearboxes, • Must be able to have the knowledge of each part to be able to communicate with the supplier., • Responsible for keeping the down time for each machine to a minimal and perform preventative maintenance on all equipment and tools., • May be responsible for ordering the parts that are necessary for each machine to operate if a purchase is necessary.

Pharmacy Technician / Account Manager: Bridging Fulfillment & Client Care Location: Dallas, Texas Position Type: Full-Time Industry: Mail Order & Specialty Pharmacy Are you a licensed Pharmacy Technician who excels at both clinical fulfillment and high-level problem-solving? We are seeking a Pharmacy Technician / Account Manager to join our team. This unique hybrid role balances hands-on mail order pharmacy operations with dedicated account management, ensuring that our providers and patients receive seamless, accurate, and efficient service. Available Shifts (Monday – Friday) We are currently hiring for the following shifts to support our 24-hour production cycle: • 2nd shift: 3:00 PM – 11:00 PM, • 3rd shift: 11:00 PM – 7:00 AM The Role: Operational Excellence & Relationship Management In this position, you will own the lifecycle of an order—from the initial pharmacy fulfillment to the final delivery—while acting as a strategic point of contact for our most important accounts. Pharmacy Fulfillment & Operations • Prescription Processing: Process and package prescriptions for shipment while adhering strictly to state and federal regulations., • Quality Assurance: Ensure accurate labeling, comprehensive documentation, and rigorous quality checks for every order., • Workflow Coordination: Assist in refining daily workflows to maximize efficiency and meet critical daily production and shipping targets., • Primary Point of Contact: Serve as the lead contact for clinics, providers, and high-volume customers, managing their unique needs and escalations., • Issue Resolution: Proactively identify and resolve discrepancies, shipping delays, or fulfillment challenges to prevent service interruptions., • Client Tracking: Monitor order statuses in real-time, providing timely updates to stakeholders and maintaining accurate records in the pharmacy management system., • Stakeholder Collaboration: Coordinate across internal teams—including pharmacists and shipping staff—to ensure seamless service delivery. What You Bring to the Team • Licensure: Must hold an active Pharmacy Technician license/registration in the state of practice., • Experience: 1–3 years of pharmacy technician experience is required; a background in mail order or specialty pharmacy is highly preferred., • Technical Proficiency: Strong skills in pharmacy management software, shipping systems, and Microsoft Office tools., • Education: High school diploma or equivalent (pharmacy technician training program preferred)., • Core Skills: Exceptional organizational abilities, a problem-solving mindset, and the ability to manage multiple high-priority tasks simultaneously. Knowledge, Skills, and Abilities • Detail-Oriented: High level of accuracy in labeling and documentation to ensure patient safety., • Problem-Solver: Tenacious ability to handle urgent requests and resolve fulfillment hurdles quickly., • Communicator: Ability to bridge the gap between internal pharmacy operations and external client expectations with professional clarity. Ready to combine your pharmacy expertise with a passion for client success? Apply today!

Job ID: 694670BR Date posted: Jan. 20, 2026 Description:You're a team player with a passion for machining and a commitment to quality, we want to hear from you. You will be the General Machinist C. Our team is responsible for setting up and performing primary machining operations on various computer-controlled and conventional machines to produce high-quality parts and assemblies. We implement machining operations using standard fixtures, robotics, and automation to meet engineering requirements. What You Will Be Doing As the General Machinist C, you will be responsible for operating and setting up machines to perform semi-complex machining operations, working with engineering drawings and instructions to produce accurate parts. Your responsibilities will include: • Creating and implementing machining operations using computer numerically controlled machines, lathes, mills, and grinders, • Setting up and operating machines with standard fixtures, robotics, and automation, • Inspecting and measuring machined parts for accuracy using precision measuring equipment, • Performing rework, cleaning, and deburring of parts to facilitate machining operations Why Join Us We're looking for a detail-oriented and collaborative individual to join our team. If yoortunity to work with a variety of machines and technologies, and to develop your skills in a dynamic and supportive environment. You'll be part of a team that values innovation, precision, and teamwork, and that is dedicated to delivering high-quality results. Further Information About This Opportunity: This position is in Dallas. Discover more about our Dallas, Texas location. Basic Qualifications: -High School degree or equivalent. -Six (6) months to two (2) years' experience or equivalent trades training. • Ability to operate CNC machines., • Basic computer knowledge., • Ability to operate Nexus, Variaxis, and/or Intergrex., • Ability to use Mazak, Siemens, and/or HAAS Controllers. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Experience Level: Hourly/Non-Exempt Business Unit: MISSILES AND FIRE CONTROL Relocation Available: No Career Area: Manufacturing Type: Full-Time Shift: Second

Sterile Compounding Pharmacy Technician: Precision in Motion Location: Dallas, TX (On-site) Compensation: $24 – $32 per hour Position Type: Full-Time Industry: Pharmaceutical / Sterile Compounding Are you a highly disciplined Pharmacy Technician who excels in a fast-paced, regulated environment? We are seeking a Sterile Compounding Pharmacy Technician to join our team in Dallas. In this role, you will be the engine of our intravenous cleanroom suite, specializing in large-volume batch production while maintaining the highest standards of aseptic technique. Available Shifts (Monday – Friday) We are currently hiring for the following shifts to support our 24-hour production cycle: • 2nd Shift: 3:00 PM – 11:00 PM, • 3rd Shift: 11:00 PM – 7:00 AM The Role: High-Volume Precision & Patient Safety Your primary responsibility is the safe and accurate preparation of sterile compounded medications. You will work within a cleanroom environment, transforming powders and liquids into custom-made sterile products tailored to patient needs. • Sterile Compounding & Batch Production: Execute accurate preparation of medications according to batch records and approved formulas, producing large runs of up to 250 vials per batch., • Aseptic Mastery: Maintain strict adherence to aseptic techniques and proper gowning procedures at all times., • Equipment Operation: Utilize compounding tools such as repeater pumps, filtration systems, and specialized mixing devices., • Quality & Compliance: Ensure every product meets USP standards and state/federal regulations; perform environmental monitoring and document disinfection procedures., • Detailed Documentation: Maintain precise batch logs, tracking lot numbers, expiration dates, and quantities with zero-error tolerance., • Collaborative Success: Partner with pharmacists and technicians to meet daily productivity goals in a clean, organized work environment. What You Bring to the Team • Licensure: Must hold an active Pharmacy Technician license/registration in the state of Texas., • Experience: At least 1+ year of sterile compounding experience is preferred; experience with USP Category 3 is highly desirable., • Education: High school diploma or equivalent is required (completion of an accredited pharmacy technician training program is preferred)., • Technical Skills: Strong attention to detail and the ability to work quickly and accurately under strict regulatory guidelines., • Physical Capability: Ability to stand for extended periods, lift up to 25 pounds, and work comfortably in full cleanroom PPE. Why Join This Team? • Impactful Work: Directly contribute to patient health by creating high-quality, custom-made sterile medications., • Professional Growth: Work in a high-productivity suite that values ongoing training and competency assessments., • Focus on Excellence: Join an organization committed to rigorous quality control and the highest safety standards in the industry. Ready to bring your aseptic expertise to a premier compounding facility in Dallas? Apply today!

Multiple immediate openings for Machinist and Machine Operators, 1st and 2nd shift positions available! Direct Hire w/ Benefits This Jobot Job is hosted by: Ba Tran Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $20 - $35 per hour A bit about us: We're a trusted leader in the aerospace, defense, and industry for over 50 years. Specializing in precision manufacturing, the company excels in delivering high-performance products and services to all of our customers. With a focus on overcoming the unique challenges of low-volume runs, our reputation is built on our ability to respond quickly and effectively to complex production and cost challenges, ensuring sustainable growth and excellence in industrial manufacturing. Why join us? • Competitive Compensation and Benefits Package (Medical + Dental + Vision + Life + Retirement Savings Plan and more!), • Long term and stable position w/ opportunity for growth, • Join a well established company who is invested in your growth and success, • We are expanding and will have plenty of opportunities right here in Orange County, CA!, • Rewarding work and responsibilities, • Paid Time Off, Sick Pay, • Multiple openings on both 1st and 2nd shift Job Details We are currently seeking an experienced and highly skilled Machinist & Machine Operator for a permanent position in our dynamic engineering team. The ideal candidate will have a strong background in machining and tooling, with a keen eye for detail and a deep understanding of technical drawings and precision measurement tools. This role requires an individual with a strong work ethic, exceptional problem-solving skills, and a commitment to maintaining high levels of quality and efficiency in all tasks. Responsibilities: 1. Reading and interpreting technical drawings, blueprints, and specifications to understand the requirements of products and processes., 2. Operating and maintaining various types of machining equipment such as mills, lathes, grinders, and drill presses., 3. Utilizing micrometers, calipers, and gauges to take precise measurements and ensure products meet exact specifications., 4. Setting up, adjusting, and calibrating all types of machine tools and equipment., 5. Using GD&T (Geometric Dimensioning and Tolerancing) principles to inspect and validate parts and assemblies., 6. Performing routine machine maintenance and troubleshooting to diagnose and correct machine malfunctions., 7. Fabricating and modifying parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, shop mathematics, metal properties, layout, and machining procedures., 8. Collaborating with engineers and other personnel to implement operating procedures and resolve system malfunctions, and provide technical information. Qualifications: 1. A minimum of 1 year of experience in a machinist or machine operator role, 2. Extensive knowledge of machine operations and basic maintenance., 3. Proficiency in using precision measurement tools, such as micrometers, calipers, and gauges., 4. An understanding of GD&T principles., 5. Hands-on experience working with various hand and power tools, 6. Ability to read and interpret technical drawings and blueprints., 7. Strong problem-solving skills and attention to detail., 8. Ability to work independently and as part of a team., 9. Excellent verbal and written communication skills., 10. Completion of a machinist apprenticeship program or equivalent is a plus, 11. Certification from the NTMA is a plus. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description HiFyve is hiring a Blow Molding Technician in the plastics manufacturing industry in Garland, TX! Salary: $30/hr - $40/hr Shift: Full-Time – 1st, 2nd, and 3rd shift available. Location: On-site – Garland, TX Position Overview We are seeking a technical expert with extensive blow molding knowledge to support high-volume plastics manufacturing operations. This individual will serve as the go-to resource for technical problem-solving, process optimization, and team training. The role requires deep, hands-on experience with blow molding machinery, tooling, and process engineering. Job Duties and Responsibilities • Lead advanced troubleshooting of blow molding machinery and downstream equipment, • Optimize processes to improve product quality, reduce scrap, and maximize uptime, • Train and mentor technicians and supervisors on best practices for machine setup and changeovers, • Collaborate with plant leadership to identify process improvements and capital investment needs, • Support installation, commissioning, and validation of new equipment or technology upgrades, • Serve as the subject-matter expert for blow molding technical challenges at the Garland facility, • Ensure compliance with OSHA and internal safety standards while driving operational excellence Education & Experience Requirements • Technical or vocational degree/certification preferred; equivalent experience considered, • 10+ years of direct blow molding experience required (extrusion blow molding preferred), • Proven ability to lead advanced troubleshooting and process improvement initiatives, • Strong understanding of mechanical, electrical, hydraulic, and pneumatic systems, • PLC troubleshooting experience a plus Knowledge, Skills and Abilities • Recognized expertise in blow molding equipment and processes, • Strong leadership, training, and mentoring skills, • Ability to partner with plant leadership and technical staff to resolve critical challenges, • Problem-solving mindset with a drive to implement lasting technical solutions, • Hands-on, detail-oriented, and safety-focused If you are interested, please apply.

Job Description ILLES Foods Job Description Job Title: 2nd Shift Liquid Machine Operator (Training on first shift for 2 weeks required) Reports To: Liquid Production Supervisor FLSA: Permanent, Full Time, Non-Exempt, On-Site About Us: Specializing in custom-crafted culinary solutions—from beverage bases and sauces to marinades and seasonings—ILLES Foods has partnered with food service chains, manufacturers, and retailers across the U.S. since 1927. Our Food Innovation expertise, creativity, and speed to market, combined with a laser focus on customer experience, make us a key partner in product development. As a family-owned, woman-run business, our growth is fueled by deeply held values: operating with integrity, maintaining intentional curiosity, and strong relationship building through the power of partnership. At ILLES Foods, we strive to be the ingredient that elevates food and enriches the lives of our partners, internal and external. Job Summary: The Successful candidate is responsible for set-up and operation of at least 2 filling/packaging machines used in production, in accordance with process and quality standards to meet production schedules assigned. They will perform production activities and operate production equipment in accordance with BRC requirements, Good Manufacturing Practices (GMP’s), as well as all Illes SOP’s, Safety and Quality standards and time sequences. Partner conducts themselves in a manner that is aligned with Illes Foods Core Values: Operate with Integrity, Stay Intentionally Curious, and Believe in the Power of the Partnership Key Duties and Responsibilities: * Verify bulk materials, packaging components, and labels against batch sheet * Load correct label files, input variable data, and get FSQA label approval * Set up and operate up to two packaging machines per standard settings * Perform job changeovers and monitor production for safety and efficiency * Inspect materials and products for seal integrity, print quality, and weight * Conduct seal leak tests and collect samples for QA * Operate HMI systems; adjust machines and maintain SPC charts * Load materials, fill packages accurately, and stack finished goods on pallets * Maintain equipment cleanliness and follow safety/health standards * Accurately record production data in RiteTime and Ross * Operate or learn to operate filling machines and forklifts * Follow GMP, food safety, and quality standards at all times * Maintain professional verbal and written communication * Regular attendance required; perform other tasks as assigned Required Key Skills and Qualifications: * Active Listening: Fully engaging with others, understanding their points, and asking relevant questions when needed. * Equipment Maintenance: Performing routine maintenance on machinery and identifying when and what type of maintenance is necessary. * Judgment and Decision Making: Evaluating actions based on their costs and benefits to make the best decisions. * Troubleshooting: Identifying the cause of machine or process issues and determining corrective actions. * Monitoring: Observing machine indicators, gauges, and performance to ensure operations run smoothly and within standards. Experience & Education: High School or Equivalent or the ability to obtain same within specified time. 0-2 years Food Industry Experience plus a minimum of 6 months Packaging Equipment experience required. Working Conditions & Physical Demands: * Lifting: Ability to continuously lift weights up to 55 lbs. vertically. * Carrying: Ability to continuously carry up to 55 lbs. to distances up to 70 in. * Push-Pull: Able to transfer up to 100 lbs. on a sled up to distances of 45 ft (no repetitions. * Repetitive Coupling: Ability to continuously squeeze Jamer hand Dynamometer requiring forces up to 10 lbs. * Climbing: Ability to continuously ascend and descend a step with a height of 8 in. * Temperatures: Varies from 55 to 110 degrees What We Offer: We are a core-value driven, inclusive team that values innovation, growth, and impact. We offer career development, mentorship, competitive pay, and comprehensive benefits—including medical, dental, vision, 401(k) with immediate match, HSA, EAP, life, disability, and more! Disclaimer: The job description provides a general overview of the work, not a detailed list of all tasks and skills. Reasonable accommodation is available for individuals with disabilities as required by law. Some requirements may exclude individuals who pose a health or safety risk. Employees must follow job-related instructions and perform additional duties as per federal and state laws. The listed requirements are the minimum needed to perform the job effectively. Employment is "at-will," meaning it can be terminated at any time. ILLES Foods is an Equal Opportunity Employer. (M/F/D/V) Powered by JazzHR v2sekp03jc

Job DescriptionMachine Operator – 2nd Shift - Carrollton Contract Details (Temp-to-Hire) • Shift: 2nd Shift (1:00 PM – 9:00 PM), • Pay Rate: $16/hour during initial training period, • Type: Temp-to-hireJob SummaryThe Machine Operator supports daily production by running paper bag converting and printing machines. This role ensures machines are properly set up, operated safely, and maintained for optimal quality and output. The position requires attention to detail, mechanical aptitude, and the ability to work safely around large manufacturing equipment.Key Responsibilities, • Operate paper bag converting and printing machines according to production orders., • Verify correct print, paper type, and paper handles before and during runs., • Assist Technicians with machine setup, including loading paper rolls onto feeders., • Monitor and maintain appropriate glue levels; clean glue buildup as needed., • Perform minor troubleshooting and adjustments to maintain machine efficiency., • Reduce material waste by ensuring correct calibration and settings., • Conduct quality checks on finished products and communicate with packers., • Maintain cleanliness of machine components to support long-term performance., • Follow all safety procedures, especially when handling pressurized glue cannisters or reaching into machinery.Required Experience, • Experience working with or around large manufacturing machinery., • Ability to lift materials up to 50 lbs., • Ability to stand throughout the shift and occasionally crawl into machine spaces for cleaning.Nice-to-Have Experience, • Prior experience in a production, converting, printing, or packaging environment., • Bilingual communication skills.Required Skills (Top 3 Must-Haves), • Mechanical aptitude with ability to troubleshoot and perform minor machine adjustments., • Ability to use basic hand tools (Allen keys, wrenches, pliers)., • Strong understanding of safety procedures when operating industrial equipment.Preferred Skills, • Machine calibration skills, • Quality inspection skills, • Basic equipment maintenance skills, • Understanding of production workflows, • Ability to work effectively with technicians and packersAdditional Skills from Original Description, • Not afraid to get dirty or enter machine areas for cleaning. #vipstaffing #zrsdal

Job Description About T1 Energy At T1 Energy, we are committed to transforming the future through clean, reliable, and innovative solar energy solutions. As a global leader in the solar energy industry, our mission is simple: to benefit humanity with solar energy. We set industry standards through cutting-edge research, development, and manufacturing of photovoltaic (PV) cells and modules. Developers and contractors around the world choose T1 Energy for our reliable technology, high-performance products, and dedication to quality. As we continue to grow, expand into new markets, and innovate our product offerings, we are seeking passionate, hard-working individuals to join our dynamic and fast-paced team. Be a part of powering a cleaner future with T1 Energy. Position Overview As a Line Leader, you will play a crucial role in our production team. The Line Lead Operator is an on-the-line position, responsible for contributing to and driving the daily execution of a production line while ensuring that the quality and safety standards are met. The Line Lead Operator provides guidance and support to all production operators. The Line Lead Operator also monitors the performance and efficiency of the production equipment, troubleshoots any issues, and coordinates with the maintenance and engineering teams when issues exceed the Standard Operating Procedures (SOP) for Production personnel. The Line Lead Operator reports to the Shift Lead and works closely with other departments such as quality control, logistics, and inventory. The Line Lead Operator will directly lead a team of up to 35 operators. Line Lead Responsibilities: • Oversee the operation of the designated line or area., • Ensure equipment is set up properly and labor is sufficient., • Troubleshoot machine issues, including knowing when to escalate for maintenance assistance., • Train your team in all safety procedures, ensure safety compliance, ensure paperwork is completed as required, and is the preferred trainer on their designated line., • Responsible for directing line personnel and working as part of the operation team, while demonstrating the ability to work independently, as necessary., • Complete all scheduled production to current standard run rates in the time allocated., • Responsible for 5S management on designated line., • Identify the processes or machines contributing most to downtime and prioritize them for improvement initiatives aimed at enhancing overall productivity., • Closely monitor and address defects and material losses, implementing corrective actions to mitigate these issues and improve production quality and efficiency., • Complete all necessary production-related reports and actively participate in meetings with the Shift Supervisor., • Direct the production staff, assign tasks, and provide training and feedback., • High school diploma or equivalent., • Minimum of 1-2 years of experience in a manufacturing production environment., • Previous experience as a production lead operator or a similar role., • Knowledge of the manufacturing production process, equipment, and tools., • Knowledge of quality and safety standards, policies, and procedures., • Ability to operate, troubleshoot, and maintain the production equipment., • Ability to read and interpret technical documents, manuals, and instructions., • Ability to perform basic math and measurements., • Ability to work under pressure and meet production goals and deadlines., • Ability to lead, motivate, and manage a team of production staff., • Ability to communicate and collaborate effectively with other departments and stakeholders., • Problem-solving and analytical skills., • Physical stamina and strength to lift and move heavy objects (max of 50 pounds)., • Able to work independently and as part of a team., • Basic computer skills and other related manufacturing software. T1 Energy is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability, genetic information, or protected veteran status. We are committed to creating a diverse and inclusive workplace where all individuals are treated with respect and dignity. I have received, read, and understood this job description, including all Health, Safety, and Environmental (HSE) responsibilities. I agree to perform the duties outlined and comply with company policies and procedures. DAY SCHEDULE (12 hour rotational shifts): A Shift: 6:00am - 6:00pm (1st week: 4 days on & 3 days off / 2nd week: 3 days on & 4 days off) C Shift: 6:00am - 6:00pm (1st week: 4 days off & 3 days on / 2nd week: 3 days off & 4 days on) EVENING SCHEDULE (12 hour rotational shifts): B Shift: 6:00pm - 6:00am (1st week: 4 days on & 3 days off / 2nd week: 3 days on & 4 days off)

Job Description ILLES Foods Job Description Job Title: Liquid Production Batcher (2nd Shift) Reports To: Liquid Production Supervisor FLSA: Permanent, Full Time, Non-Exempt Hours: 2 PM - 1AM Monday-Thursday About Us: Specializing in custom-crafted culinary solutions—from beverage bases and sauces to marinades and seasonings—ILLES Foods has partnered with food service chains, manufacturers, and retailers across the U.S. since 1927. Our Food Innovation expertise, creativity, and speed to market, combined with a laser focus on customer experience, make us a key partner in product development. As a family-owned, woman-run business, our growth is fueled by deeply held values: operating with integrity, maintaining intentional curiosity, and strong relationship building through the power of partnership. At ILLES Foods, we strive to be the ingredient that elevates food and enriches the lives of our partners, internal and external. Job Summary: The Successful candidate is responsible for operating all tanks and kettles used in production, in accordance with process and quality standards to meet production schedules assigned. In average this operator should complete efficiently at least 2 batches during the shift. This operator can also run at least 1 packaging/filling machine or the heat exchanger. They will perform production activities and operate production tanks and kettles in accordance with BRC requirements, Good Manufacturing Practices (GMP’s), as well as all Illes SOP’s, Safety and Quality standards and time sequences. Partner conducts themselves in a manner that is aligned with Illes Foods Core Values: Operate with Integrity, Stay Intentionally Curious, and Believe in the Power of the Partnership. Key Duties and Responsibilities: * Check raw materials, containers and label information against batch sheet for RM Number. * Add materials in sequence per batch instruction. Dump or pour specified amounts of materials into machinery or equipment. * Controls blend time per batch instruction. * Observe production or monitor equipment to ensure safe and efficient operation. * Examine materials, ingredients, or products visually or with hands to ensure conformance to established standards. * Report equipment malfunctions to team leaders, supervisor or maintenance staff * Observe work and monitor Human machine interface (HMI), and other indicators to ensure that operators conform to production or processing standards. * Coordinate sample collection with QA with necessary information for testing. * Accurately fill containers to specified label weight or volume. * Safely operate production processing, and powered industrial equipment. * Load materials and products into package. * Examine and inspect containers, materials, and products to ensure that packing specifications are met. * Stack finished containers on pallets per specifications. * Accurately punch in make and fill times on the batch sheet using RiteTime. * Clean and maintain equipment, using hand tools in accordance with health and safety standards * Check screens and magnets after filling and document information on batch sheet. * Mark and label containers, container tags, or products, using marking tools. * Move raw materials to production tanks and move finished goods to warehouse. * Able to complete minimum of 2.5 batches per 8-hour shift. * Maintain appropriate and professional written and verbal communication. * Ensure that food safety, legality, integrity and quality standards are maintained at all times. * Perform other tasks as assigned by Management. * Regular attendance is a requirement of this position for scheduled shifts Required Key Skills and Qualifications: * Active Listening — Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times. * Adherence to policy, procedure and attendance requirements · Certified forklift driver. * Coordination — Adjusting actions in relation to others' actions. * Equipment Maintenance — Performing routine maintenance on equipment and determining when and what kind of maintenance is needed. * Flexibility - Able to handle pressure and change * Judgment and Decision Making — Considering the relative costs and benefits of potential actions to choose the most appropriate one. * Mathematics — Using mathematics to solve problems. · Monitoring — Monitoring/Assessing performance of yourself, other individuals, or organizations to make improvements or take corrective action. * Operation and Control — Controlling operations of equipment or systems * Operation Monitoring — Watching HMI screens, gauges, dials, or other indicators to make sure a machine is working properly. * Read, speak, and write fluent English Experience & Education: High School or Equivalent or the ability to obtain same within specified time. 0-2 years product blending preferred. Food Industry experience. Working Conditions & Physical Demands: * Lifting: Ability to continuously lift weights up to 55 lbs. vertically. * Carrying: Ability to continuously carry up to 55 lbs. to distances up to 70 in. * Push-Pull: Able to transfer up to 100 lbs. on a sled up to distances of 45 ft (no repetitions. * Repetitive Coupling: Ability to continuously squeeze Jamer hand Dynamometer requiring forces up to 10 lbs. * Climbing: Ability to continuously ascend and descend a step with a height of 8 in. * Temperatures: Varies from 55 to 110 degrees What We Offer: We are a core-value driven, inclusive team that values innovation, growth, and impact. We offer career development, mentorship, competitive pay, and comprehensive benefits—including medical, dental, vision, 401(k) with immediate match, HSA, EAP, life, disability, and more! Disclaimer: The job description provides a general overview of the work, not a detailed list of all tasks and skills. Reasonable accommodation is available for individuals with disabilities as required by law. Some requirements may exclude individuals who pose a health or safety risk. Employees must follow job-related instructions and perform additional duties as per federal and state laws. The listed requirements are the minimum needed to perform the job effectively. Employment is "at-will," meaning it can be terminated at any time. ILLES Foods is an Equal Opportunity Employer. (M/F/D/V) Powered by JazzHR c5MrX7qdIz

Job Description We are currently seeking a Maintenance Technician to join our warehouse repair team! You will be responsible for completing work orders and other required tasks. Responsibilities: • Complete work and repair orders in a timely fashion, • Estimate time and extent of repairs, • Perform routine preventive maintenance, • Maintain material and supply inventory, • Previous experience in distribution/warehouse maintenance required, • Familiarity with maintenance tools and equipment, • Experience with conveyor maintenance and repairs, • Familiar with three phase 480 Voltage, • Ability to handle physical workload, • Deadline and detail-oriented, • Robotics experience is a plus!Company DescriptionStaff DFW is seeking talented, reliable individuals.Staff DFW is seeking talented, reliable individuals.

Job Description Garland Stainless Steel Manufacturing Company seeking a Qualified and Experienced Equipment Electrician Employment type: 2nd Shift-Full-Time (4) 10-hour days Monday-Thursday 3:15pm-1:45am Job duties include: Wire, rebuilding and repair of electrical food service equipment and controls. Apply knowledge of equipment wiring, determine equipment malfunctions, and test units to required specifications. Must be Able to: Work from wiring diagrams, drawings, specifications, and instructions, for work to be done on equipment. Plan and perform work using knowledge of electrical theory and principles, wiring specifications, and local and national electrical codes. Install cables and wiring, and perform splicing as required. Fabricate parts when required using machine and hand tools common to the trade. JOB QUALIFICATIONS: 1. Experience as an equipment and plant electrician., 2. Extensive knowledge of wiring, circuits for equipment. Bilingual Candidates (English/Spanish) is a PLUS, but not Mandatory. Candidate must be a Self-Starter, Motivated, and Dependable Compensation: $20-$22 Hourly Depending on Experience Competitive wages, 401K, health insurance, Paid Vacation and Holidays, Bonus Programs and many other Perks. Weekends and OT as needed Please submit resume or reply detailing experience and providing salary history and contact information. Company DescriptionAFB Manufacturing is a growing 75+ year old family-owned company. AFB Manufacturing is an industry leader in our niche market, serving multi-billion dollar companies all over the world. Our specialty protects us from imports, so our team members have no job insecurity relating to offshore competition. We expanded our Garland, Texas manufacturing facility and capacity multiple times in the past 10+ years and the only thing we need are people who care about the quality of their work and want to learn and develop new skills as needs arise.AFB Manufacturing is a growing 75+ year old family-owned company. AFB Manufacturing is an industry leader in our niche market, serving multi-billion dollar companies all over the world. Our specialty protects us from imports, so our team members have no job insecurity relating to offshore competition. We expanded our Garland, Texas manufacturing facility and capacity multiple times in the past 10+ years and the only thing we need are people who care about the quality of their work and want to learn and develop new skills as needs arise.

Job Description Hiring a Mold Setter 1st and 2nd shift available Responsibilities; responsible for maintaining appearance of all thermolaters Must follow all OSHA safety rules Load processing and robot programs, water tools, set up thermolators, hot runners. Drive the reduction of scrap through identifying defective mold conditions using corrective action Operate fork truck Place core in molds Qualifications; Experienced with a range of IMM tonnage and controll types 3-5 years experience in die setting Ability to push or or pull heave loades with wheeled car lift 40 pounds needs to know plant machinery , electronics, hydraulics, and pneumatics Basic math, reading Robotics exp. prefered hs diploma Non -climate controlled Company DescriptionWell-established company looking for trustworthy leaders that want growth opportunities.Well-established company looking for trustworthy leaders that want growth opportunities.

Job Description Employment Type: Full-Time Hours: Monday-Friday 6:00 AM-2:30 PM 1st Shift Monday-Friday 2:00 PM-10:30 PM- 2nd Shift Sunday-Thursday 10:00 PM-6:30 AM 3rd Shift Why Work Here? “We offer a wide range of job profiles and we give our employees early responsibility and equip them with specialist skills.” JOB TITLE: Setter GENERAL DESCRIPTION: Set up machines per specified requirements to assure quality standards and parameters of the manufacturing orders are met. Participate in continuous improvement and safety. Coilers/wire formers (CNC programming) for existing parts. Ensure all machines / operations are running smoothly, promptly and at highest quality standards. They are ensuring the efficient running of equipment and contribute to the production process. Set up machines per specified requirements to assure quality standards and parameters of the manufacturing order are met. JOB RESPONSIBILITIES (Include but are not limited to): • Set up wire coiling machine / change wire, • Responsible for accuracy of all transactions within the department, • Machine and support equipment preparation. Assure the machine is cleaned, properly lubricated and prepared before each set up., • Minimize downtime through tooling preparation and requisition of materials prior to machine availability for set up, • Implement the control plan for the production process (i.e. load testing, dimentionals), • Ensure the equipment is serviced as required before the operation, • Perform set ups of machines per specified instructions. Make necessary allowances for heat treating / stress relieve operation when applicable., • Basic spring calculation, • Creation of set up card for new items. Review and revision of set up cards for revision of existing items, • Perform Machine preventive maintenance, • Maintain equipment to assure it is operated according to equipment specifications and safety standards., • Inspection and SPC control per QSYS /control plan instructions. Make adjustments when necessary., • Assure proper monitoring of the production to assure quality parameters are met. Make adjustments when necessary., • Assure machine is set up and monitored to maintain the proper run speed and scrap rate, • CNC programing for existing parts, • Thorough knowledge of assigned inspection equipment. Assure proper set up and use of machines., • Identification and traceability of product, • Maintain proper containment and reaction activities (i.e., proper segregation by manufacturing order), • Keep work area clean, orderly and safe, • Know the production process, safety and procedure of the BST Quality Manual, • Follow established work instruction designated by the supervisor, • Use safety equipment and eliminate unsafe conditions, • Maintain integrity of tooling. Tooling must be maintained and stored per procedures., • Monitor tooling inventory. Replacement tooling must be ordered when it meets or dips below the minimum stock level as required, • Set up and operate auxiliary equipment related to the production machine., • Direct activities of Operators and Packers to assure machines are running to specified standards (quality, speed & scrap), • Support Operators and Packers to assure they have the tools, equipment, and documentation needed to perform their duties, • Attend production meetings and communicate needs to all employees in the department, • Responsible for cleanliness and organization of the department, • Identify and introduce 5S / process improvements as required KNOWLEDGE, SKILLS and ABILITIES: • High School Diploma or GED (preferred) or equivalent of 2 years’ experience, • Ability to comply with responsibilities in accordance with the organization’s policies and applicable laws, • Ability to lift up to 50 pounds, • Knowledge and ability of proper Quality procedures in accordance with shipping, • Knowledge and ability in proper inventory control and maintenance, • Knowledge and ability to maintain proper safety in the area including maintenance of equipment, • Read and understand manufacturing order with its specifications, • Read, understand and implement the instructions on the production orders/routings, • SPC Basics, • Preventive machine maintenance At Baumann Group, we celebrate diversity and are committed to creating an inclusive environment for all employees. We are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.The BAUMANN Group has been a symbol of Swiss precision and quality for more than 130 years. We invite you to benefit from our experience as one of the world's leading manufacturers of springs and stampings. The group has eleven production sites around the globe, where more than 1,600 people design and produce technically sophisticated products for selected industries, including the automotive, electrical engineering and medical technology sectors. Learn more about BAUMANN visiting our homepage: Baumann Group, we celebrate diversity and are committed to creating an inclusive environment for all employees. We are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.

About American Meat Companies: American Meat Companies was founded by Ron and Mariellen Day in a small meat locker in Anaheim, California. From our very modest beginnings in 1975, American Meat Companies has grown to become one of the largest meat purveyors in Southern California and has expanded to a brand new state-of-the-art facility in Dallas, Texas.We produce a full line of steaks, hamburger patties, pork chops, and poultry items, and we make them to your specifications. We know meat. And it’s all we do. We are passionate about quality and we are extremely proud of the reputation we have earned over the past 46 years. 2nd Shift Industrial Maintenance Tech Job Summary: Under the supervision of the Facilities & Maintenance Manager, you will be responsible for setting up, installing, repairing, and maintaining production/manufacturing equipment and machinery for a new start-up facility. Inspects equipment for proper functioning and performs preventative maintenance duties per manufacturer's specifications. Diagnosis equipment malfunctions and makes repairs or adjustments as needed. Responsible for assuring all work performed meets Product Safety and Quality, Employee Safety, and Legality of Policies and Procedures. Essential Duties and Responsibilities: 1. Follow specifications of blueprints, manuals, and schematic drawings; install, maintain and repair equipment, machinery, physical structures, and plumbing/electrical systems. 2. Inspect, measure, and test equipment while in operation visually (using electrical and electronic equipment) and auditory (listening for unusual sounds from machines or equipment) to detect malfunction, wear, misalignment, or other problems. Inspect used parts to determine changes in dimensional requirements., 3. Discuss/diagnose machine problems with the Maintenance Supervisor, Production Supervisor, Production Superintendent, Plant Manager, or other maintenance workers. Inform appropriate management personnel of equipment and parts needs., 4. Dismantle defective machines and equipment and install new or repaired parts. Reassemble and test machines., 5. Clean and lubricate shaft, bearings, gears, and other parts of machinery., 6. Install and repair electrical apparatus, such as transformers, wiring, and electrical and electronic components of machinery and equipment., 7. Layout, assemble, install and maintain pipe systems and related hydraulic and pneumatic equipment. Repair and replace gauges, valves, pressure regulators, and related equipment., 8. Install, program, and repair automated machinery and equipment, such as robots or programmable controllers., 9. Set up and operate machine tools, such as lathe, grinder, drill, and milling machine, to repair or fabricate machine parts. Other Duties and Responsibilities: 1. Repair and maintain the physical structure of the establishment and perform preventative maintenance functions., 2. Assist production personnel in change-over and set-up procedures., 3. Attend safety classes/seminars as periodically scheduled. Decision Making & Problem Solving: Responsible for troubleshooting, diagnosing, and repairing production equipment, including but not limited to industrial blenders, industrial mixers, automated packaging equipment, robotic equipment, pumps, valves, and pressure vessels. Good Manufacturing Practices: Interprets GMP and HACCP regulations into Company and product-specific practices. Production Support: Accountable for the efficient installation, maintenance, and repair of Electrical Controls and Mechanical machinery. Equipment includes but is not limited to Hydraulics Combo Dumpers, Meat Blenders, Grinders, Freezers, Scales, Labelers, Case Sealer, Baggers, Seasoning equipment, etc. Project Management: Engages in cross-functional activities and collaborates across boundaries to ensure successful project implementation. Gathers information to interpret needs, assess requirements, and take the initiative to identify sound solutions through the application of expertise and knowledge. Must have a very strong customer service orientation with a high sense of urgency. Quality System Compliance: Ensures the requirements of the Quality System, the Quality System Regulation (USDA, FDA), and other relevant standards are fulfilled. Safety: Enforces Company safety policies and procedures. Responsible for the safe operation and performance of Maintenance and Facility. Technical Documentation/Communication/Processes: Knowledge of preventive maintenance procedures / Total Productive Maintenance. Prior experience in Computerized Maintenance Management Systems. Training & Development: Complete training and documentation thereof, in line with Company policies and procedures. Other Compliance: Works to ensure compliance with all applicable laws and regulations issued by OSHA, EPA, Labor & Employment Law, and other federal, state, and local regulations, including Lock-out/Tag-out, confined spaces, and personal protection regulations. Job Requirements (Education, Work Experience, Certifications, Skills) Education: High school or equivalent (Required), Technical Degree (Preferred), technical training, or equivalent years' experience acceptable in place of formal education. Must be computer literate with proficiency in using CMMS systems. Work Experience: Minimum five (5) years of industrial maintenance experience in manufacturing (Food Preferred); strong in precision maintenance, electro-mechanical troubleshooting, and other industrial skills to include pneumatic and hydraulic system knowledge with; experience with mechanical systems (e.g., gear boxes, chains, sprockets, motors, seals, bearings), product manuals (e.g., reading and applying knowledge to make repairs), troubleshooting mechanical breakdowns (pinpointing and fixing breakdowns), and reading mechanical drawings (e.g., hydraulics, pneumatics); Experience with electrical systems to include low voltage control circuits, motor circuit controls, VFD s, PLC troubleshooting knowledge (Rockwell PLC/HMI knowledge), and electrical safety systems required. Certifications: OSHA 40 (Preferred) Skills: Ability to communicate effectively with a variety of individuals. Ability to work in a fast-paced environment. Ability to reason, negotiate, instruct, persuade, or speak with others. Ability to pay close attention to detail. Strong interpersonal skills and judgment in communicating with staff. Receptive to management development suggestions and willing to seek additional knowledge to facilitate job growth. Excellent written and oral communication skills. Proven ability to juggle multiple tasks simultaneously. Ability to interpret HR regulations, safety rules, operating and maintenance instructions, and procedures manuals. Ability to solve complex problems. Fully competent to a high degree in mechanical knowledge. Ability to troubleshoot electrical controls. Ability to follow verbal and written instructions, as well as interpret pencil sketches and diagrams. Ability to read ladder logic and use it to troubleshoot systems. Other Duties and Responsibilities: May be required to work overtime, evenings, or weekends to complete work. May be required to work flexible shifts, including on-call. Other duties and tasks as assigned. Job Type: Full-time Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance Schedule: • 2nd Shift, • Holidays, • Possible Overtime, • Weekends as needed Work Location: In person

Job DescriptionElectrical Wiring Technician- Garland 2nd Shift Are you a skilled electrician with a passion for precision and quality? Join our dynamic team as a Control Wiring Technician, where you'll wire, assemble, and mount components for cutting-edge electrical control equipment. Your expertise will ensure our products meet the highest standards. Location: Garland, TX Schedule: Monday-Friday 2PM-10PM- OT as requested Pay rate: $22 Responsibilities: Wiring Mastery: Bring control panels, switchgear, switchboards, and ATS to life with your wiring skills. Blueprint Expert: Independently interpret wiring diagrams to complete assignments with confidence. Tech Savvy: Wire advanced electronics like PLCs, ensuring seamless operation. Assembly Guru: Piece together electrical switchboard equipment with precision. Quality Champion: Follow instructions and drawings to inspect and test products, guaranteeing top-notch quality. Team Player: Keep jobs on track, report issues, and support your peers, especially during high-demand periods. Adaptable: Embrace new tasks and challenges as they arise, showcasing your flexibility and dedication. Required Skills / Abilities: Experienced Pro: 3+ years in electrical assembly/manufacturing. Industry Knowledge: Familiar with electrical equipment manufacturing/assembly (panelboards/switchboards preferred). Technical Expertise: Skilled in wiring power meters and controls, using various tools and safety equipment. Diagram Decoder: Proficient in reading wiring schematics and point-to-point diagrams. Flexible Worker: Ready to work flexible hours and adapt to changing demands. Independent and Collaborative: Capable of working alone and thriving in a team environment. Effective Communicator: Strong verbal and written communication skills. Safety-Conscious: Always aware of and engaged in health and safety practices. Ability to read, write, and speak English. BG check Resume and Interview Required Work Environment & Physical Responsibilities: Work in a loud production environment with varying temperatures, including some outdoor tasks. Comfortable with repetitive movements, kneeling, crouching, and lifting up to 50 pounds. Comprehensive Benefits: Dental insurance Health insurance Vision insurance Note: This description provides a general overview of responsibilities and expectations and may change based on business needs. Contact Information Contact Information Ready to Elevate Your Career? Contact us at Midway Staffing today! Location: 3460 N Town East Blvd Ste 300, Mesquite TX 75150 Office hours: Monday - Friday 8am-5pm Reach out now at 469-589-4450 and seize this amazing opportunity! Link to Apply: What We Offer Midway Staffing offers a comprehensive benefits package offering Medical, Dental, Vision and Life/AD&D benefit options to all eligible employees. About Midway Staffing Midway Staffing is a dynamic and rapidly growing enterprise dedicated to connecting top talent with leading organizations. Specializing in innovative staffing solutions, we are committed to delivering exceptional service to both clients and candidates. With a strong presence spanning multiple locations nationwide and recognition on the prestigious Inc. 5000 list of Fastest-Growing Private Companies in America from 2019 to 2024, Midway Staffing exemplifies excellence and growth. We are equally dedicated to fostering internal development and supporting career advancement opportunities for our team members. Midway Staffing is proud to be an Equal Opportunity Employer. We consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, genetic information, disability status, protected veteran status, or any other legally protected characteristic or group status. We are committed to creating a culturally diverse and inclusive workplace where individuals of all abilities are welcomed and supported. If you require a reasonable accommodation during the application or interview process, please contact us at Include the nature of your request and your contact information, and we will be happy to assist you. #ZRCompany DescriptionMidway Staffing is a dynamic and rapidly growing enterprise dedicated to connecting top talent with leading organizations. Specializing in innovative staffing solutions, we are committed to delivering exceptional service to both clients and candidates. With a strong presence spanning multiple locations nationwide and recognition on the prestigious Inc. 5000 list of Fastest-Growing Private Companies in America from 2019 to 2024, Midway Staffing exemplifies excellence and growth. We are equally dedicated to fostering internal development and supporting career advancement opportunities for our team members. Midway Staffing is proud to be an Equal Opportunity Employer. We consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, genetic information, disability status, protected veteran status, or any other legally protected characteristic or group status.Midway Staffing is a dynamic and rapidly growing enterprise dedicated to connecting top talent with leading organizations. Specializing in innovative staffing solutions, we are committed to delivering exceptional service to both clients and candidates. With a strong presence spanning multiple locations nationwide and recognition on the prestigious Inc. 5000 list of Fastest-Growing Private Companies in America from 2019 to 2024, Midway Staffing exemplifies excellence and growth. We are equally dedicated to fostering internal development and supporting career advancement opportunities for our team members.\r\n\r\nMidway Staffing is proud to be an Equal Opportunity Employer. We consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, genetic information, disability status, protected veteran status, or any other legally protected characteristic or group status.

Job Description We are looking for a Fabrication Supervisor for 2nd Shift. This position will be based at our facility in Grand Prairie, TX. Transform the everyday with us You’ll make an impact by: • Being the key driver of all daily production related processes and the hub of information transfer between the hourly assembly workforce, management, engineering, quality control, purchasing and planning., • Improve safety for all personnel that work in and around production line while drive efforts and initiatives to reduce production errors, improve product quality, and increase efficiency., • Handle production schedule, assign personnel to work areas, supervise progress, coordinate, and document training of personnel, drive continuous improvement projects, and conduct annual employee performance evaluations., • Maintain working relationships with local union by following the collective bargaining agreement. Basic Qualifications: • 2+ years of experience in an Assembly/Manufacturing or related field as a supervisor., • Bachelor's degree (or equivalent), • 1+ years of Project Management experience., • Microsoft Office Experience, • Lean Manufacturing techniques., • Bachelor's Degree, • Continuous Improvement, • Electrical Schematics, • CNC Programming, • CNC Machine Installation, • Supervisory Experience, • Kaizen, • Lean Manufacturing Principles, • ISO 9001 Certification Experience, • Maintenance and Repair Skills, • Experience in a Manufacturing Environment, • ISO 14001 Certification Experience

Warehouse Janitorial Cleaner at Marsden South Shifts: Monday to Friday 1st Shift: 6:00 am to 2:30 pm 2nd Shift: 2:30 pm to 11:00 pm 3rd Shift: 6:00 pm to 2:30 am Hourly Rate: $17.00 - $19.00 Location: Wilmer, Texas Requirements: • You must be 18 years old, • You must have work authorization, • It is necessary for you to be able to adapt to the hot and cold warehouse working conditions., • A pre-employment drug screen may be required at some of our sites and criminal background check is mandatory. As you might expect, cleaning is at the heart of what your job will entail. For the most part, you’ll be: • Keep the work environment clean and free of obstructions, • Sweep floors and empty trash bins, • Operate and walk behind auto scrubbers, • Wipe down plastic totes and containers, • Dust shelves and storage areas Marsden South, Marsden Holding Company, is a facility services provider with an unmatched reputation for operational excellence. We clean, sanitize, and service large and small businesses across the United States. • We are an Established Organization, • Jobs are Classified as Essential Marsden Services and its affiliates provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, creed, ancestry, sexual or affectional orientation, marital or veteran status, color, religion, sex, national origin, age, disability, genetics, status regarding public assistance or any characteristic protected under federal, state, or local law.

DIVE IN TO A NEW CAREER WITH LESLIE'S: Founded in 1963, Leslie's is the largest and most trusted direct-to-consumer brand in the U.S. pool and spa care industry. We serve the aftermarket needs of residential and professional consumers with an extensive and largely exclusive assortment of essential pool and spa care products. We operate an integrated ecosystem of 900+ retail locations, backyard service and repair, a robust digital platform, and manufacturing and distribution divisions across 35+ states—enabling consumers to engage with Leslie’s whenever, wherever, and however they prefer to shop. With over 60 years of providing best-in-class products and solutions to our customers, there is nothing that we value more than the development and growth of our team. We strive to create a positive and fun atmosphere where our Team Members feel valued and are enthusiastic about the contributions they make to the success of Leslie's. Job Overview: The Seasonal Warehouse Associate 3 position will require operating Cherry Picker and Reach Truck power equipment. All candidates will be responsible for picking FedEx tickets, store tickets, and small parts orders. Associates may rotate through multiple departments, including inbound, outbound, and eCommerce, based on business needs. Pay: $20.50 / Hourly Responsibilities: • Receiving/Put-Away - Unload inbound shipments safely and move product to storage locations. Before product storage, count all products, compare to manifest, and check all shipments for damage. Report shortages, damages, and mis-shipments on the appropriate form and forward them to the supervisor. Efficiently stack and store the merchandise in the appropriate areas., • Loading - Efficiently move product from staging or storage areas into trailers. Ensure all product is safely stacked, wrapped, and loaded in compliance with company policies and procedures., • Equipment – Safely and efficiently operate forklift or other material handling equipment as required and assist in the loading or unloading of merchandise as needed. Use radio frequency equipment for picking, receiving, and storing functions as needed., • Experience – Six months of forklift experience is required, • Ability to work overtime during peak season, • Ability to lift 50+ pounds repeatedly, • Drug test – Required, • Other general warehouse activities and duties may be assigned #SeasonalDC Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

Airport Janitorial Cleaners at Marsden South Shift: 1st and 2nd shift available The days and times will be discussed during the interview. Hourly Rate: $16.88 Location: Airport - Irving, TX. Requirements: * You must be 18 years old. * Be able to comply with a fingerprint clearance * Be able to comply with a drug test * A valid driver's license will be required for most of current openings. * A pre-employment drug screen and criminal background check are required. * Able to lift up to 30lbs. Job Duties: * Emptying wastebaskets and recyclables and transporting to disposal area. * Sweeping, mopping, vacuuming floors using brooms, mops and manual or backpack vacuum cleaners. Some floors may require scrubbing, waxing, and polishing. * Stocking and Replenishes Supplies * Requires following safety policies and procedures (such as locking doors, using proper chemicals and reporting incidents). * Cleaning Restrooms * Taking out the trash * Sanitizing Why Join the Marsden Family? Marsden South, a Marsden Holding Company, is a facility services provider with an unmatched reputation for operational excellence. We clean, sanitize, and service large and small businesses across the United States. * Room to Grow * Jobs are Classified as Essential * Flexible Work Schedule EEO Statement Marsden Services and its affiliates provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, creed, ancestry, sexual or affectional orientation, marital or veteran status, color, religion, sex, national origin, age, disability, genetics, status regarding public assistance or any characteristic protected under federal, state, or local law.

Job DescriptionDescription: Description We are looking for an experienced Corrugated Press Machine Operator to set up, maintain and operate Corrugated Presses. You’ll ensure the interminable and efficient running of production. A great machine operator is reliable and can work with attention to detail and safety standards. Being a team player is essential since all tasks require close collaboration with co-workers. The goal will be to ensure that production procedures will be carried out smoothly to maximize efficiency and profits. Responsibilities: • Set up machines (calibration, cleaning, etc.) to start a production cycle, • Control and adjust machine settings (e.g., speed), • Feed raw materials or parts to semi-automated machines, • Inspect parts with precision measuring tools, • Test operation of machines periodically, • Fix issues that might occur during the shift, • Check output to spot any machine-related mistakes or flaws, • Keep records of approved and defective units or final products, • Follow all safety rules and procedures, • Performs other duties and/or responsibilities as assigned, • Maintain activity logs

Job Description Mechanical Assembler Are you a detail-oriented professional with a knack for assembling and building? We have an exciting opportunity for a Mechanical Assembler at our manufacturing facility in Garland, TX! If you're ready to take your skills to the next level and work with a dynamic team, we want to hear from you! As a Mechanical Assembler, you will play a crucial role in assembling products such as switchboards and ensuring they meet our high-quality standards. You will use your skills to read blueprints, schematics, and other documentation to build products accurately and efficiently. Location: Garland, TX Schedule: Monday-Friday 2PM-10PM and OT as requested Pay rate: $20.90 Responsibilities: * Assembles machinery, fabricated metal products, electrical equipment, appliances, and more according to instructions. * Reads blueprints, schematics, or similar documentation, then builds to those specifications. * Uses various machines and hand tools to accomplish assigned tasks. * Maintain logs, records, and reports concerning production, machine maintenance, and product inconsistencies. * Perform quality checks to ensure products meet specifications. * Troubleshoot and resolve assembly issues or defects. * Team Player: Keep jobs on track, report issues, and support your peers, especially during high-demand periods. * Adaptable: Embrace new tasks and challenges as they arise, showcasing your flexibility and dedication. Requirements: * 1+ year of Assembly experience * Detail Oriented and consistent * Ability to read and understand blueprints and schematics * Independent and Collaborative: Capable of working alone and thriving in a team environment. * Safety-Conscious: Always aware of and engaged in health and safety practices. * Ability to read, write, and speak English. BG check * Resume and Interview Required Benefits: * Dental Insurance * Health insurance * Vision insurance Work Environment & Physical Responsibilities: * Work in a loud production environment with varying temperatures, including some outdoor tasks. * Comfortable with repetitive movements, kneeling, crouching, and lifting up to 50 pounds. Job Type: Full-time Note: This description provides a general overview of responsibilities and expectations and may change based on business needs. Contact Information Ready to Elevate Your Career? Contact us at Midway Staffing today! Location: 3460 N Town East Blvd Ste 300, Mesquite TX 75150 Office hours: Monday - Friday 8am-5pm Reach out now at 469-589-4450 and seize this amazing opportunity! Link to Apply: What We Offer Midway Staffing offers a comprehensive benefits package offering Medical, Dental, Vision and Life/AD&D benefit options to all eligible employees. About Midway Staffing Midway Staffing is a dynamic and rapidly growing enterprise dedicated to connecting top talent with leading organizations. Specializing in innovative staffing solutions, we are committed to delivering exceptional service to both clients and candidates. With a strong presence spanning multiple locations nationwide and recognition on the prestigious Inc. 5000 list of Fastest-Growing Private Companies in America from 2019 to 2024, Midway Staffing exemplifies excellence and growth. We are equally dedicated to fostering internal development and supporting career advancement opportunities for our team members. Midway Staffing is proud to be an Equal Opportunity Employer. We consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, genetic information, disability status, protected veteran status, or any other legally protected characteristic or group status. We are committed to creating a culturally diverse and inclusive workplace where individuals of all abilities are welcomed and supported. If you require a reasonable accommodation during the application or interview process, please contact us at Include the nature of your request and your contact information, and we will be happy to assist you. #ZRCompany DescriptionMidway Staffing is a dynamic and rapidly growing enterprise dedicated to connecting top talent with leading organizations. Specializing in innovative staffing solutions, we are committed to delivering exceptional service to both clients and candidates. With a strong presence spanning multiple locations nationwide and recognition on the prestigious Inc. 5000 list of Fastest-Growing Private Companies in America from 2019 to 2024, Midway Staffing exemplifies excellence and growth. We are equally dedicated to fostering internal development and supporting career advancement opportunities for our team members. Midway Staffing is proud to be an Equal Opportunity Employer. We consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, genetic information, disability status, protected veteran status, or any other legally protected characteristic or group status.Midway Staffing is a dynamic and rapidly growing enterprise dedicated to connecting top talent with leading organizations. Specializing in innovative staffing solutions, we are committed to delivering exceptional service to both clients and candidates. With a strong presence spanning multiple locations nationwide and recognition on the prestigious Inc. 5000 list of Fastest-Growing Private Companies in America from 2019 to 2024, Midway Staffing exemplifies excellence and growth. We are equally dedicated to fostering internal development and supporting career advancement opportunities for our team members.\r\n\r\nMidway Staffing is proud to be an Equal Opportunity Employer. We consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, genetic information, disability status, protected veteran status, or any other legally protected characteristic or group status.

Job Description2ND SHIFT MACHINE OPERATORS NEEDED IN GRAND PRAIRIE!!! TEMP TO PERM OPPORTUNITY We are seeking dynamic associates with some computer knowledge, be flexible, and enjoy coming to work! Metro Staffing has partnered with a renowned manufacturing company located in Grand Prairie Tx. Our client specializes in the production of high-quality springs for various industrial applications and offers a great opportunity for individuals seeking to start their career in the manufacturing industry. Machine Operators play a crucial role in the production process and will be responsible for operating various machinery and equipment. Key Responsibilities: • Operate and monitor equipment such as presses, cutters, and assembly machines to uphold production standards, • Perform routine maintenance, cleaning, and troubleshooting of machines to ensure smooth operations, • Inspect finished products for quality assurance, making adjustments as necessary, • Collaborate with team members and supervisors to meet production goals and deadlines, • Adhere to safety protocols and guidelines to maintain a secure work environment, • Record production data accurately and maintain production records Requirements: • High school diploma or equivalent, • Strong attention to detail and ability to follow instructions, • Basic mechanical aptitude and troubleshooting skills, • Excellent time management and organizational skills, • Ability to work effectively in a team-oriented environment, • Familiarity with manufacturing processes and equipment is a plus, but not required 1ST SHIFT: 2 PM - 10:30 PM MONDAY THRU FRIDAY PAY $16.50 HOURLY APPLY TODAY! TEXT 817.204.0850 FOR IMMEDIATE CONSIDERATION AFTER YOU APPLY

Job Description Metro Staffing is currently seeking EXPERIENCED FORKLIFT AND/OR ELECTRIC PALLET JACK OPERATORS Operators are responsible for loading and unloading goods, determining loading procedures, staging orders, and checking product for loading accuracy. SHIFT: 2nd 6 PM - 3 AM Sunday thru Thursday PAY: $18 Hourly What's on the Menu: • Load and unload trucks accurately in a timely manner., • Notify management of damaged or suspect product., • Complete loading or receiving tasks to comply with safety and quality standards., • Assure completion of required daily distribution paperwork, i.e., receiving logs, load sheets, damaged product, etc., • Operate fork trucks and other material handling equipment in a safe and professional manner., • Perform daily, weekly, and monthly sanitation tasks according to sanitation schedule; including, trailers., • Communicate with Shift Leader regarding Safety, product levels, quality issues, day-to-day challenges, etc., • Communicate with other department team members to ensure the correct product is being picked and loaded., • Assist customers with will-call pick-ups as required., • Ensure compliance with Safety, Sanitation, and HACCP policies & procedures, federal, state, and local regulations (OSHA, FDA, DOL), and all company policies & procedures., • High school diploma or equivalent preferred., • Previous experience with loading and unloading trucks preferred., • Previous experience with technologically advanced order picking system is preferred., • Ability to read and/or understand written and/or verbal policy, instruction and direction in English required., • Must be able to safely operate a forklift and manual/electric pallet jacks., • Ability to perform mathematical tasks required.Interested in becoming a new crew member give us a call or text 817-204-0850.

Job Description 2nd Shift Pack Off Essential Functions • Punctuality and attendance is crucial to meet daily production goals., • Operator sets up machine before shift starts., • Runs product samples before production, fill out paperwork, and sets up code’s dates when applicable., • Must lift heavy objects from lower to higher position and move objects horizontally from position to position., • Assist in other areas as assigned by supervisor or manager. Job Requirements/Skills • Able to follow verbal instructions from Supervisor, • Handle multiple projects in a fast paced and limited timeframe while remaining detailed-oriented, reliable and organized, • Excellent communication skills, • Display strong leadership abilities, • Analytical skills and attention to diminutive details, • Must follow all Safety rules and Company Procedures, • Mechanically inclined Experience • Working in a high-volume food manufacturing environment a plus

Job Description Build your career with RJ Schinner, a growing, family-owned wholesale redistributor with over 70 years of success. We have 20 distribution centers throughout the US, 600+ employees, and provide disposable paper, cleaning, and food service packaging products to distributors in 48 states. Headquartered in Menomonee Falls, WI, RJ Schinner is a well-established company started in 1951. RJ Schinner currently ranks as the 46th most successful private company on Deloitte’s 2024 Wisconsin 75 and has also been recognized through BizTimes’ Future 50 Program as one of the fastest growing privately-owned companies in southeastern Wisconsin. Order Selector Job Summary Full-time | Monday-Friday | Second shift, 2:30 pm - 11:30 am, or until completion The Order Selector receives and transports products to appropriate locations. Picks products, assembles orders and prepares goods for shipment. Responsible for ensuring accurate receipt/shipment and appropriate handling of merchandise. Has knowledge of commonly used concepts, practices, and procedures within the redistribution field. Order Selector Qualifications • 1-year previous warehouse experience, • 1-year previous forklift experience, and ability to follow all safety protocols, • High degree of attention to detail, • Ability to lift up to 50-75 lbs. frequently, • Comfortable with exposure to environmental conditions (e.g., heat/cold; noise and dust), • Competitive base pay, Tier-based annual increase structure and year-end bonus opportunity, • Medical, Dental and Vision insurance, Employer paid life and short-term disability insurance, • Two weeks’ paid time off your first year, paid holidays and paid leave program, • Internal advancement opportunity, • Up-to-date technology and operations equipment, • Regular Employee Appreciation events, • Employee pricing program on RJ Schinner sold products, • Operate different types of forklifts including stand-up, and order picker, • Utilize RF scanners to track inventory and product movement, • Receive, pick and/or transport product throughout warehouse according to company standards, • Stack, palletize, tote, and/or store product in a safe and efficient manner, • Maintain shipping, receiving and inventory records through proper documentation, • Maintain organization and warehouse cleanliness R.J. Schinner Co., Inc. is proud to be an Equal Opportunity Employer. We hire and promote for all positions without regard to race, religion, color, national origin, gender, sexual orientation, gender identity and/or expression, disability, or veteran status. All terms and conditions of employment are administered on the basis of equality.

Job Description Metro Staffing is currently seeking EXPERIENCED STANDUP FORKLIFT OPERATORS Operators are responsible for loading and unloading goods, determining loading procedures, staging orders, and checking product for loading accuracy. SHIFT: 2nd 5 PM - Until finish WORK DAYS: Sunday, Monday, Wednesday, and Thursday (OFF TUESDAY, FRIDAY & SATURDAY) PAY: $18 Hourly What's on the Menu: • Load and unload trucks accurately in a timely manner., • Notify management of damaged or suspect product., • Complete loading or receiving tasks to comply with safety and quality standards., • Assure completion of required daily distribution paperwork, i.e., receiving logs, load sheets, damaged product, etc., • Operate fork trucks and other material handling equipment in a safe and professional manner., • Perform daily, weekly, and monthly sanitation tasks according to sanitation schedule; including, trailers., • Communicate with Shift Leader regarding Safety, product levels, quality issues, day-to-day challenges, etc., • Communicate with other department team members to ensure the correct product is being picked and loaded., • Assist customers with will-call pick-ups as required., • Ensure compliance with Safety, Sanitation, and HACCP policies & procedures, federal, state, and local regulations (OSHA, FDA, DOL), and all company policies & procedures., • High school diploma or equivalent preferred., • Previous experience with loading and unloading trucks preferred., • Previous experience with technologically advanced order picking system is preferred., • Ability to read and/or understand written and/or verbal policy, instruction and direction in English required., • Must be able to safely operate a forklift and manual/electric pallet jacks., • Ability to perform mathematical tasks required.Interested in becoming a new crew member give us a call or text 817-204-0850.

Job DescriptionCompany Description Headquartered in Cordova, TN, Stratas Foods is a 50/50 joint venture formed in October 2008 between ACH Food Companies and Archer Daniels Midland Company. Stratas Foods is built on the combined strengths and expertise of these two great parent companies, laid down over the course of over 200 years of combined experience. Stratas will continue to build on this foundation of excellence by providing value added, branded and custom formulated fats and oils solutions to the Food Service, Food Ingredient and Retail sectors. At Stratas Foods we are committed to being the most valued supplier of fats, oils, dressings, mayonnaise and salad dressings to the private label retail bottled oils market in the United States. Manufacturing facilities are located in Dallas and Houston, TX; Decatur and Quincy, IL; Englewood, NJ; Hillside, NJ; Fresno, CA; Nashville, TN; and Valdosta, GA. Corporate offices are located in Memphis, TN. We are committed to maintaining a progressive workplace by utilizing the ideas, skills and talents of all of our employees. We strive to make Stratas Foods a great place to work and are building a team capable of meeting our business goals. Job Description Schedule: Monday- Friday (2:00pm-10:30pm) with some weekend work and OT The Forklift Operator/Machine Operator (Production Area) supports the safe, efficient and productive set up, maintenance, and operations of machinery and forklifts (to include general maintenance, cleaning, lubrication (oiling, greasing, etc.), sample retrieval, power washing, lifting and hauling items up and down stairs, dump rework, prepare packaging, package product) as required or assigned by supervisor. I Forklift Operations: • Must be trained and certified on the forklift., • Trained and able to demonstrate hazardous chemical handling., • Proficient in the operation of the stretch wrappers., • Must be proficient with a forklift on all operations lines., • Load trucks in the prescribed manner., • Must demonstrate the ability to complete and make changes to pick sheets., • Communicate with visitors and customers in a professional manner., • Must have basic operational knowledge of roll up doors., • Must be able to understand the inventory procedure., • Trained and able to demonstrate pallet transfer operations., • Must demonstrate the ability to reconcile finished product. II Machine Operations: • Inspects machines to ensure proper functioning of machine and compliance with safety standards and industry regulations., • Set up manufacturing equipment., • Keep lines stocked with packaging materials., • Fill out appropriate paper related to the lines CCP’s, production, packaging materials., • Basic troubleshooting and repair of packaging equipment., • Knowledge of basic operation of equipment on the line., • Communicate with supervisor when line is down due to equipment or product supply., • Communicate with supervisor and leads when equipment needs attention., • Report/resolve any observed quality issues while operating line., • Proper start up, running and shut down of line., • Proper tear down, cleaning, and reassembling pumps, sanitary lines, and line equipment., • Knowledge of chemical handling procedures including PPE required., • Knowledge of process flow and ability to trace flow from source tank to filling process., • Basic understanding of pumps, valves, and how to change filters.Qualifications Education: High School Diploma or equivalent Related Experience: Previous relevant experience - preferably in a manufacturing environment Equipment/Software Skills: Proficient knowledge in operating Forklift and Machine utilizing in manufacture environment, Basic computer knowledge. Additional Information Forklift Driver/Machine Operator Physical: This position requires the ability to lift up to 50 pounds, climb stairs, bend, kneel, stand for extended periods, work in confined spaces, and work at heights Schedule: Monday- Friday (2:00pm-10:30pm) with some weekend work and OT. This is a great position for forklift drivers, forklift operators, forklift material handlers, warehouse forklift operators, and manufacturing warehouse operators and material handlers. Videos to Watch Benefits: Medical, Dental, Vision Stratas Foods is an equal opportunity employer and will not discriminate against any applicant or employee in any manner prohibited by law, including but not limited to, on the basis of race or color, religion, gender, age, genetic information, national origin/ancestry, mental or physical disability, family status/marital status, military/veteran status, and any other legally protected status. Pay Transparency Nondiscrimination Provision-The Employer will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the Employer’s legal duty to furnish information. 41 CFR 60-1.35(c) Stratas Foods Applicant Request for Accommodation Form: Stratas Foods California Privacy Rights Act Policy:

Job Description 2nd shift starts @ 3pm The Packaging Machine Operator A (PMO A) position is responsible for the operation of assigned packaging equipment while meeting and exceeding all safety, quality, and efficiency standards. Must inspect settings for codes, dates, leaks, oxygen levels, and seals to ensure proper operation of all the packaging equipment. Job Function Statements - Essential Functions: • Responsible to operate all packaging machines efficiently, • Support with on the floor training, • Conduct with packaging technician on testing new products, • Routinely solicits input & improves the process, • Assist other PMOs with their lines, • Abilities to make improvements to the process, • Responsible to set up & achieve 100% startup of packaging machine with no guidance, • Assures Quality products are being produced, • Communicate and direct members (i.e., packers), • Finalize all required documentation, • Maintain completing Clean, Inspect, Lubricate process, • Interconnect well in one-on-one reviews, • Conduct maintenance with mechanical troubleshooting, • Successfully pass machine operator training classes in accordance with the Continuous Skills Development Program, • Works safely and follows all basic safety rules to help prevent accidents, • Successfully pass Safety Training provided by the Continuous Skills Development Program Qualifications/Skills: • Bilingual English/Spanish, • Basic mechanical troubleshooting skills Other Desired Qualifications/Skills: • Stand for the duration of the shift (8 hours or more), perform repetitive motions throughout the shift such as push/pull/lift, twist, stoop, and bend continuously through the shift, • Climb stairs or step up onto a platform several times throughout the shift., • Work in a noisy, wet, and cold environment of approximately 34 degrees Fahrenheit, • Work 6 or more consecutive days including overtime, any shift, late nights, weekends, and holidays if necessary. Other Information: The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed, as an exhaustive list of responsibilities, duties and skills required of personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer Job Posted by ApplicantPro

Job DescriptionCompany Description Headquartered in Cordova, TN, Stratas Foods is a 50/50 joint venture formed in October 2008 between ACH Food Companies and Archer Daniels Midland Company. Stratas Foods is built on the combined strengths and expertise of these two great parent companies, laid down over the course of over 200 years of combined experience. Stratas will continue to build on this foundation of excellence by providing value added, branded and custom formulated fats and oils solutions to the Food Service, Food Ingredient and Retail sectors. At Stratas Foods we are committed to being the most valued supplier of fats, oils, dressings, mayonnaise and salad dressings to the private label retail bottled oils market in the United States. Manufacturing facilities are located in Dallas and Houston, TX; Decatur and Quincy, IL; Englewood, NJ; Hillside, NJ; Fresno, CA; Nashville, TN; and Valdosta, GA. Corporate offices are located in Memphis, TN. We are committed to maintaining a progressive workplace by utilizing the ideas, skills and talents of all of our employees. We strive to make Stratas Foods a great place to work and are building a team capable of meeting our business goals. Job Description Schedule: Monday- Friday (2:00pm-10:30pm) with some weekend work and OT. Qualified Line Lead Filler Operator candidates must be able to perform a variety of jobs, tasks, or duties as required; and must be able to work their bid shift, overtime, and weekends as required. The Line Lead Filler Operator tasks required, but not limited to, are general housekeeping, clean up, sweeping, vacuuming, painting, lubrication (oiling, greasing, etc.), sample retrieval, power washing, lifting and hauling items up and down stairs, dump rework, operate a motorized fork lift, prepare packaging, package product and other duties as assigned by supervision. * Keep lines stocked with packaging materials. * Fill out appropriate paper related to the lines CCP’s, production, packaging materials. * Basic troubleshooting and repair of packaging equipment. * Knowledge of basic operation of equipment on the line. * Operation of CIP skids in addition to breakdown and cleaning of line components. * Communicate with supervisor when line is down due to equipment or product supply. * Communicate with supervisor when equipment needs attention. * Report/resolve any observed quality issues while operating line. * Proper start up, running and shut down of line. * Proper tear down, cleaning, and reassembling pumps, sanitary lines, and line equipment. * Knowledge of chemical handling procedures including PPE required. * Knowledge of process flow and ability to trace flow from source tank to filling process. * Basic understanding of pumps, valves, and how to change filters. * Successfully pass qualification test of that Operator 2 is responsible for. Qualifications Line Lead Filler Operator Education: High School Diploma or equivalent Related Experience: Previous relevant experience, preferably in a manufacturing environment Equipment/Software Skills: Basic computer knowledge - data Competencies: • Employees are encouraged to participate in efficiency and safety improvement teams, • Learn and follow written rules and procedures, • Produce accurate documentation, • Maintain acceptable attendance, • Will have the opportunity to learn various positions, • Must fill in when needed in temporary/permanent vacancies, • Must adhere to and comply with all safety, food safety, environmental, GMP rules, regulations and policies Additional Information Physical: This position requires the ability to lift up to 50 pounds, climb stairs, bend, kneel, stand for extended periods, work in confined spaces, and work at heights Benefits: Medical, Dental, Vision Stratas Foods is an equal opportunity employer and will not discriminate against any applicant or employee in any manner prohibited by law, including but not limited to, on the basis of race or color, religion, gender, age, genetic information, national origin/ancestry, mental or physical disability, family status/marital status, military/veteran status, and any other legally protected status. Pay Transparency Nondiscrimination Provision-The Employer will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the Employer’s legal duty to furnish information. 41 CFR 60-1.35(c) Stratas Foods Applicant Request for Accommodation Form: Stratas Foods California Privacy Rights Act Policy:

Job Description Join Our Team as a Production Operator – Build the Future of Electronics! Location: Richardson, TX | Schedule: Monday – Friday, 4pm – 12:45 am | Pay: 20.90 per hour Are you ready to be part of a dynamic electronics manufacturing team where precision, quality, and innovation matter every day? PDS Tech Commercial is partnering with a leader in the Electronics Manufacturing Industry to hire Production Operators who will play a vital role in assembling and testing electronic products that power today’s advanced technologies. Role Summary & Impact As a Production Operator, you’ll be at the heart of our manufacturing process — assembling, testing, inspecting, and troubleshooting electronic products and assemblies. Your attention to detail and commitment to quality directly impacts our ability to deliver world-class products to our customers. Every day you contribute to efficiency, reliability, and excellence across the production floor. Day-to-Day Responsibilities In this role, you will: * Perform hand soldering, manual assembly, and operate semi-automatic and automated equipment. * Set up, run, and conduct basic maintenance on assembly and test equipment. * Conduct visual, automated, electronic, and mechanical inspections to ensure product quality. * Use diagnostic programs to execute electronic product testing and functional testing. * Identify, troubleshoot, and communicate defects or process issues to team leads. * Move between operations and products based on schedule needs. * Maintain accurate records and documentation of production activities. * Collaborate with team members to meet production schedules and ensure compliance with quality standards. Required Qualifications To thrive in this role, you should have: * Certifications required by site operations relating to safety or specific assembly skills. * General knowledge of product process flow, manufacturing systems, and soldering quality standards. * Ability to read and interpret work instructions and documentation. * Strong hand-eye coordination and attention to detail. * Familiarity with electrical, electromechanical, and pneumatic systems. * Basic computer skills and ability to learn new shop floor applications. * Ability to communicate effectively with team members. * Capability to work in a manufacturing environment with exposure to noise, machinery, and other typical shop conditions. Preferred Qualifications While not required, candidates with the following will stand out: * Experience with electronic assembly or testing environments. * Previous use of manufacturing information systems and automated test equipment. * A track record of identifying and supporting continuous improvement efforts. * Prior exposure to lean or quality improvement processes. Ready to Build. Test. Innovate? If you’re passionate about electronics, enjoy hands-on work, and want to be part of a team driving innovation, we want to hear from you! Apply now and take your career to the next level with us! This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license. Pay Details: 20.90 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description About Fusion Transport Delivering Next-Generation Logistics Solutions Fusion Transport offer more than 40 years of industry leading experience providing customized supply chain solutions. We are a rapidly growing >$300M+ company with nationwide presence. We are an integrated third-party logistics company, with a brokerage division, an in-house long-haul fleet, several warehouses around the country, and a retail consolidation business. We currently operate under three levels of services which include Assets, Brokerage, and Warehousing. From first contact to final delivery. Our approach is what is missing in the industry and our customer experience is what will allow us to take the next steps in Fusion’s evolution! Job Overview: Responsible for executing daily functions and projects which involves all materials in the warehouse. Ensures material movements, transfers, and distribution is performed in an efficient and accurate manner. Takes precautions to protect warehouse contents against loss. Retains and reviews warehouse documents and reports. Completes miscellaneous support functions and supports area personnel as required. How You Will Make an Impact: • Complete & document daily forklift inspections., • Move material to/from stock to manufacturing lines using a RF Gun., • Accurately transact all material movements real time into WMS., • Shrink wrap and stage in the appropriate area., • Accurately count material returning to stock, attach a “COUNTED” sticker with updated quantity, initial and date., • Maintain cleanliness and organization throughout building including pallet organization, emptying of dumpsters and loading of recyclable material into dunnage trailer., • Be in constant communication with other team members and leadership to understand their needs and status of current and future jobs., • Movement of inventory and non-inventory pallets to ensure efficient operations., • Perform accurate Cycle Counts and any requested counts., • Proficient with data entry into an WMS system., • Experience in a 3PL Warehousing or Crossdock facility is a plus., • Ability to work as a team and independently., • Good attention to detail., • Ability to perform all tasks while continuously standing., • Ability to work quickly, efficiently, and accurately while ensuring quality., • High School Diploma or equivalent, • 1-2 years’ experience in material handling in a manufacturing environment., • Forklift certified (or eligible). Physical Requirements and Shifts • Extended periods of standing., • Frequently moves items weighing up to 50 pounds., • 1st Shift (7:00 am to 3:30 pm), • 2nd Shift (3:30 pm to 12 am) What we Offer: • Medical, Dental and Vision Insurance, • Paid holidays, • Paid time off (PTO), • 401(k), • Career growth and development opportunities, • Collaborative & committed team environment All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, status as a qualified individual with a disability, or Vietnam era or other protected veteran. 1st Shift (7:00 am to 3:30 pm) 2nd Shift (3:30 pm to 12 am)