2nd shift jobs in Houston, TexasCreate job alerts

ADEX Healthcare Staffing LLC is seeking a travel nurse RN Cardiac Cath Lab for a travel nursing job in Houston, Texas. Job Description & Requirements • Specialty: Cardiac Cath Lab, • Discipline: RN, • Start Date: ASAP, • Duration: 13 weeks, • 40 hours per week, • Shift: 10 hours, days, • Employment Type: Travel RN Position Job Notes: Travel or Local Registered Nurse needed for ASAP start. A minimum of 2+ years of recent hospital bedside experience is required. Candidates must be able to start within 5 weeks. Opportunity for extension upon successful completion of the initial assignment. $750 referral bonus available. Opportunity: \n RN - Cardiac Cath Lab \n\n Job Details: \n Adex Job ID #991996. Pay package is based on 10 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. About ADEX Healthcare Staffing LLC ADEX has been placing healthcare professionals across the US since 2004. Originally founded in Atlanta, GA, the company's headquarters are now located in Tampa, FL. JCAHO certified since 2009. Benefits • Referral bonus

ADEX Healthcare Staffing LLC is seeking a travel Cath Lab Technologist for a travel job in Houston, Texas. Job Description & Requirements • Specialty: Cath Lab Technologist, • Discipline: Allied Health Professional, • Start Date: ASAP, • Duration: 13 weeks, • 40 hours per week, • Shift: 10 hours, days, • Employment Type: Travel Allied Position Job Notes: Travel or Local Allied Healthcare Professional needed for ASAP start. A minimum of 2+ years of recent hospital bedside experience is required. Candidates must be able to start within 5 weeks. Opportunity for extension upon successful completion of the initial assignment. $750 referral bonus available Opportunity: \n Cardiac Cath Lab Tech - Cardiac Cath Lab \n\n Job Details: \n Adex Job ID #991992. Pay package is based on 10 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. About ADEX Healthcare Staffing LLC ADEX has been placing healthcare professionals across the US since 2004. Originally founded in Atlanta, GA, the company's headquarters are now located in Tampa, FL. JCAHO certified since 2009. Benefits • Referral bonus

ADEX Healthcare Staffing LLC is seeking a travel Cath Lab Technologist for a travel job in Houston, Texas. Job Description & Requirements • Specialty: Cath Lab Technologist, • Discipline: Allied Health Professional, • Start Date: ASAP, • Duration: 13 weeks, • 40 hours per week, • Shift: 10 hours, days, • Employment Type: Travel Allied Position Job Notes: Travel or Local Allied Healthcare Professional needed for ASAP start. A minimum of 2+ years of recent hospital bedside experience is required. Candidates must be able to start within 5 weeks. Opportunity for extension upon successful completion of the initial assignment. $750 referral bonus available Opportunity: \n Cardiac Cath Lab Tech - Cardiac Cath Lab \n\n Job Details: \n Adex Job ID #991034. Pay package is based on 10 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. About ADEX Healthcare Staffing LLC ADEX has been placing healthcare professionals across the US since 2004. Originally founded in Atlanta, GA, the company's headquarters are now located in Tampa, FL. JCAHO certified since 2009. Benefits • Referral bonus

Job Description (Please note if you are viewing this posting on an external job board, unless specifically stated in the posting, the provided hourly/salary estimates may not be accurate as they are not provided by CKS.) We are seeking a skilled Industrial Maintenance Mechanic to join our team. The ideal candidate will be responsible for troubleshooting, repairing, and maintaining production machinery and facility equipment to ensure safe, efficient, and reliable operation. This role requires strong mechanical aptitude, problem-solving ability, and experience working in a manufacturing environment. COMPETITIVE PAY BASED ON EXERIENCE AND SKILLS Shift Availability: 2nd: 3:00pm-11:00pm, Monday through Friday (most Saturday's) Key Responsibilities: • Perform troubleshooting, repair, and preventive maintenance on production equipment, mechanical systems, and facility utilities, • Diagnose issues with motors, gearboxes, pumps, conveyors, pneumatic and hydraulic systems, • Conduct electrical troubleshooting (basic to intermediate), including sensors, switches, and control wiring, • Read and interpret mechanical drawings, schematics, and manuals, • Perform equipment adjustments, changeovers, and improvements to support production goals, • Maintain accurate maintenance logs and documentation, • Ensure all work is performed safely and in accordance with company policies, • 3+ years of industrial or manufacturing maintenance experience required, • Strong mechanical troubleshooting skills; knowledge of pneumatics, hydraulics, and mechanical assemblies, • Ability to perform basic electrical troubleshooting, • Welding and fabrication experience a plus, • Experience in plastics, blow molding, injection molding, or similar manufacturing industries, • Knowledge of PLCs, VFDs, and automation systems

Job DescriptionPosition: Debug Technician Report To: Shift Leader Department: Test Engineering Location: Houston, or relocation is requiredPay Rate: $19.00 per hour Main Functions Product Debug and Testing: The Debug Technician is responsible for performing functional tests and failure analysis on non-conforming products, both in the production area and in the service center. Additionally, they are responsible for manually or electronically recording information and reporting recurring issues related to processes, materials, or equipment. The technician actively participates in teams responsible for developing corrective actions. Engineering Systems and IT Equipment: The Debug Technician supports and maintains engineering systems and IT tools used throughout various production phases, including regular inspections and virus control checks. Participation in building or modifying new or existing IT infrastructure is also required Test Systems and Test Stations: The Debug Technician is responsible for the periodic inspection and maintenance of test systems, test infrastructure, and testing tools used during different production stages. They are also involved in setting up or modifying test infrastructure. Teamwork: As a member of the engineering team, the Debug Technician strives every day to ensure full satisfaction of both the customer and other departments within the factory. Duties & Responsibilities Quality: Ensures that products are handled correctly during testing, failure analysis, and repair stages, and that only quality products are released. Production Support: The Debug Technician must coordinate with the group leader and/or direct supervisor regarding the testing and repair sequences to ensure production targets are met Customer Focus: As with all employees, the Debug Technician must recognize the importance of both internal and external customers and act to provide the best possible products and services Order and Cleanliness: Ensures a consistently clean and safe working environment. This includes handing over a clean workstation at the end of each shift and paying special attention to test and failure analysis equipment, which may require specific maintenance or cleaning. Maintenance: Responsible for the maintenance of test and partially IT-related infrastructure (including network cabling, test stations, input devices, test tools, hipot testers, etc.) within the facility. Also responsible for monitoring stock levels of spare parts and consumables. Reporting: Prepares end-of-shift reports, documenting all relevant events and activities Attitude: Maintains a positive, flexible, and cooperative attitude to help achieve team goals Work Attire: Must wear protective equipment in accordance with workplace policies (e.g., ESD clothing, safety glasses, earplugs, etc.). Punctuality: Must arrive at the workstation on time and in a work-ready condition before shift start Overtime: May be required to perform overtime in accordance with the Labor Code, as directed by the Employer Job Specifications Qualifications / Experience • At least 1 year of experience in a similar role, • Secondary-level IT education, • Willingness to travel abroad on short notice, • Higher education is an advantagePrimary skills, • Strong communication skills across all organizational levels, • Full understanding of the production process, • Reliability, strong organizational skills, and ability to delegate, • Ability to prioritize tasks and make sound decisions, • Willingness to travel abroad on short notice., • Positive attitude toward work, • Flexibility and willingness to temporarily take on tasks outside of the main role, • A team playerSecondary Skills / Competencies, • Accurate analytical skills, • CCNA, • CompTIA, A+ Certification Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Vision insurance, • Paid holidays Powered by JazzHR 7fQNOS5aRZ

Job Description Apply Today, Work Today Weekly Pay Job Description: We are Hiring Immediately for a Warehouse position! Loading/unloading of product, packing materials, cleaning and preparing a job site, using a variety of small tools and machines. Help with set up and take down of assembly process and collection of debris and trash. Requires bending, lifting, walking, climbing stairs. Job Requirements: • Ask about our Employee Rewards Program, • May be required to lift up-to 25lbs, • May be required to perform repetitive motions, • Must have reliable transportation, • Must be able to work in a team environment Additional Information: • Ask about our Employee Rewards Program, • Benefits include medical insurance, dental insurance, vision insurance and life insurance, • Some positions may not require background check or drug test Full-time, Part-time $10.00 - $11.50 / hr Shifts Available: • 1st Shift, • 2nd Shift, • 3rd ShiftFor this or other positions in your area. LI23 LILive24 Company DescriptionPartnering with a retirement planning company for a full time role.Partnering with a retirement planning company for a full time role.

We Are Artificial Lift. It’s what we do. All day. Everyday. Flowco is redefining well “optimization” with the very latest in USA manufactured gas lift and plunger lift technologies and delivering unrivaled customer support wherever and whenever you need it. We are seeking a CNC Machinist (2nd Shift) to become an integral part of our team! This position is located in Houston, Texas. Job Summary: The CNC Machinist (2nd Shift) will include but not be limited to these requirements and duties: • Maintain a positive work atmosphere by acting and communicating in a manner so that you get along with customers, clients, co-workers and management., • Willing to work with others and be a team player., • Must be able and willing to work second shift;, • Have 3+ years CNC Lathe and/or Mill (4th axis machine) experience Fanuc control. On DMG MORI SEIKE, DOOSAN, MAZAK machines, preferred., • Ability to understand CNC programs, preferred., • Able to run more than 1 machine at a time., • Ability to read and interpret engineering drawings and specifications., • Ability to perform parts inspection, hold drawing tolerances and use measuring tools., • Provide hands-on manufacturing expertise for machined products., • Studies blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished workpiece, sequence of operations, and setup requirements., • Ensure correct material type and size used., • Verifies conformance of finished workpiece to specifications, using measuring and inspection tools as necessary., • Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines as necessary to machine parts as required., • Starts and observes machine operation to detect malfunctions or out-of-tolerance machining and adjusts machine controls or control media as required., • Sets up and operates machine on trial run to verify accuracy of machine settings or programmed control data., • Performs routine maintenance tasks on machines as required., • Maintains cohesion among work shifts by documenting and communicating actions, irregularities, and continuing needs., • Documents actions by completing production and quality logs., • Maintain a clean and organized work area and maintain equipment, to keep a nice appearance., • Ability to solve practical problems, • Maintain a clean work environment - general housekeeping EDUCATION AND EXPERIENCE: • High School Diploma or GED, • You must be 18 years or older, • Must be able to pass background and drug test, • Oilfield/manufacturing experience preferred NO HEADHUNTERS/RECRUITERS/STAFFING AGENCIES

Job DescriptionDescription: The Robot Operator is responsible for setting up and operating robotic welding equipment according to established procedures. This role requires interpreting blueprints and drawings, adjusting robot settings to specifications, and ensuring accurate, quality production. Essential Responsibilities: • Review work orders and shop drawings to confirm dimensions and material availability, • Set up workstations, fixtures, and robotic welding equipment, • Perform dry runs on initial pieces to verify accuracy, • Operate the robotic welding system to complete production jobs, • Ability to read and interpret shop drawings, • Basic math skills and experience using measuring tools, • Familiarity with robotic welding equipment, • Ability to organize, prioritize, and manage multiple tasks, • Effective verbal and written communication skills, • Ability to stand for extended periods, • Ability to lift, push, and pull up to 25lbs unassisted Work Environment • Typical machine shop environment, • Willingness to work additional hours as needed, • Willingness to be cross trained on multiple machines Minimum Qualifications • High school diploma or GED, • Experience in a shop environment with robotic and plasma cutting equipment, • Familiarity with robot control panels; forklift and overhead crane experience preferred At VMC Group we believe in supporting our employees both professionally and personally. When you join our team, you gain more than just a job — you gain access to a range of benefits designed to promote your well-being, growth, and financial security. • Health, dental and vision insurance, • 401K with company match, • Life Insurance, • Flexible Spending Accounts, • Generous annual time off policy, • 12 Company-Paid holidays, • A Solid Wellness Program to support your personal health goals We provide equal employment opportunities to all applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic.

Job Description Sunny Sky Products prides itself on our commitment and dedication to creating, manufacturing and delivering top quality products in the beverage industry. We have generated an extensive product portfolio that includes frozen dispensed beverages, cold dispensed, hot dispensed and beverage enhancers. As a filling operator, you will be in charge of preparing and maintain line equipment in running product that meets established production standards related to quality and productivity. Some of the duties will be of filling boxes with the appropriate packing material, checking that packages are securely fashioned, adjusting machines for efficient product flow, and reporting any issues to your supervisor. Your responsibilities will include setting up and operating equipment, maintaining a clean and safe work environment, following industry standards for machine operation, and reviewing inventory for ink, labels, boxes, cartons, and other related supplies. Responsibilities: • Perform basic preventive maintenance on equipment in work area including daily greasing and lubrication., • Run various filling and packaging machines as required. (training will be provided), • Keep accurate records of all daily cleaning and PM functions., • Must be able to repeatedly lift up to 50 lbs., • Must be able to keep complete and accurate written records., • Must be able and open to learn the operation of new pieces of filling equipment and be able to advance within company., • Must be able to work a flexible work schedule., • Full time job Benefits • Medical, Dental & Vision Coverage., • Life Insurance, • 10 Paid Holidays, • PTO - Vacation Time or sick time., • 401K Program and Company Match up to 3.5%, • Company STD & LTD (Short term & Long-term disability), • Perfect Attendance Monthly Bonus Program up to $100.00, • Employee Referral Bonus Program up to $500.00 For more information about our company please visit our website at Sunny Sky Products is an equal-opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship.

Job Description Job Title: Machine Operator Trainee Job Description Join a dynamic team in a facility dedicated to manufacturing stainless steel tubing. As a Machine Operator Trainee, you'll be immersed in an environment where you'll learn to operate machinery that plays a crucial role in perfecting our products. This position demands a high level of physical activity, as you'll be on your feet throughout the day, engaging in manual labor to ensure machines are set up correctly. You will also manage work orders and input data into the computer system, contributing to the production process. Responsibilities • Assist in operating machinery that straightens stainless steel tubing., • Engage in manual labor, including moving, shoving, pushing, and pulling tubing., • Receive bundles of product and follow work orders to complete tasks., • Input information into the computer system for subsequent production steps., • At least 2 years of experience in a manufacturing role., • Ability to understand work orders and manufacturing processes., • Experience in machine operation or mechanical manufacturing., • Proficiency with micrometers or calipers., • CNC experience is a plus. Working here offers an opportunity to be part of a dedicated team in a large manufacturing facility, where you'll gain valuable experience in machine operations. The role provides a chance to advance your career with potential pay increases and training opportunities. Work Environment The role is based in a large, non-climate controlled manufacturing facility. It can be loud and hot depending on the area. The position requires working the 2nd shift (2pm-12:30pm) Monday to Thursday with occasional overtime on Fridays, totaling approximately 40 hours per week. Initially, training will occur on the 1st shift (4am-2:30pm) for about a month, with flexibility to start on the 2nd shift if needed. Job Type & Location This is a Contract to Hire position based out of Houston, TX. Pay and Benefits The pay range for this position is $16.00 - $18.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Summary: We are seeking an experienced Press Brake Operator to join our 2nd shift team. The ideal candidate will have a minimum of 5 years of hands-on experience operating press brake machines in a manufacturing or fabrication environment. Experience with Amada press brake equipment is highly preferred and considered a strong advantage. Key Responsibilities: • Set up, operate, and maintain press brake machines to bend, form, and shape metal parts according to specifications, • Read and interpret blueprints, drawings, and work orders, • Perform quality inspections using measuring tools (calipers, micrometers, gauges), • Ensure all finished products meet required tolerances and quality standards, • Conduct routine machine maintenance and report any mechanical issues, • Follow all safety procedures and maintain a clean and organized work area, • Collaborate with team members and supervisors to meet production goals Requirements: • Minimum 5 years of experience as a Press Brake Operator, • Strong knowledge of metal fabrication processes, • Ability to read blueprints and technical drawings, • Experience with precision measuring tools, • Amada press brake experience is a strong plus, • Ability to work 2nd shift hours, • Strong attention to detail and safety awareness Shift: 2nd Shift Compensation: Based on experience Company DescriptionMAGNUM STAFFING is a recruiting and staffing solutions firm based in Houston, Texas, and founded in 1996. Our areas of specialization include manufacturing, production, warehouse/distribution, technical, and logistics for the industrial business sector. We also provide various services to any industry that assists the client in their human capital management issues. This includes vendor on premise, managed services, payroll transferring and a direct hire specialist focusing on exempt and non-exempt engineering, manufacturing, petrochemical, supply chain management, finance and field operations positions. With the Staffing industry’s badge of professionalism and seal of excellence behind each hiring manager, Magnum has been designated as one of the top 10 staffing firms in Houston by the Houston Business Journal. Also,Magnum was the first industrial staffing firm in Houston to require every hiring manager to be CTS certified, setting the precedent for the city’s industrial staffing industry. By ensuring each hiring manager earns CTS certification, Magnum guarantees its hiring professionals have the most up-to-date knowledge of current employment laws and procedures, as well as business operations and ethics. DOEMAGNUM STAFFING is a recruiting and staffing solutions firm based in Houston, Texas, and founded in 1996.\r\n\r\nOur areas of specialization include manufacturing, production, warehouse/distribution, technical, and logistics for the industrial business sector.\r\n\r\nWe also provide various services to any industry that assists the client in their human capital management issues. This includes vendor on premise, managed services, payroll transferring and a direct hire specialist focusing on exempt and non-exempt engineering, manufacturing, petrochemical, supply chain management, finance and field operations positions.\r\n\r\nWith the Staffing industry’s badge of professionalism and seal of excellence behind each hiring manager, Magnum has been designated as one of the top 10 staffing firms in Houston by the Houston Business Journal.\r\nAlso,Magnum was the first industrial staffing firm in Houston to require every hiring manager to be CTS certified, setting the precedent for the city’s industrial staffing industry. By ensuring each hiring manager earns CTS certification, Magnum guarantees its hiring professionals have the most up-to-date knowledge of current employment laws and procedures, as well as business operations and ethics.\r\n

Job DescriptionBenefits: • 401(k) matching, • Competitive salary, • Free food & snacks

Job DescriptionCompany Description Cornerstone Building Brands is a leading manufacturer of exterior building products for residential and low-rise non-residential buildings in North America. Headquartered in Cary, N.C., we serve residential and commercial customers across the new construction and Repair & Remodel (R&R) markets. Our market-leading portfolio of products spans vinyl windows, vinyl siding, stone veneer, metal roofing, metal wall systems and metal accessories. Cornerstone Building Brands’ broad, multi-channel distribution platform and expansive national footprint includes more than 18,800 team members at manufacturing, distribution and office locations throughout North America. Corporate stewardship and Environmental, Social and Governance (ESG) responsibility are embedded in our culture. We are committed to contributing positively to the communities where we live, work and play. For more information, visit us at . Job Description JOB DETAILS Base pay rate starts at $25.00 per hour Shift starts at 1:00PM, with potential for overtime The Maintenance Technician I is an entry level helper with some technical schooling completed or minimum experience in maintenance. They help assist Level II and III technicians in equipment installations, repairs, or modifications related to the generation, distribution, or utilization of electric energy within the manufacturing facility. • Understands and follows all safety rules and precautions necessary for working in and around a manufacturing environment., • Assists with repairing and installing various electrical equipment including generators, transformers, switchboards, controllers, circuit breakers, motors, heating units, and conduit systems. Works with blueprints drawings, layouts, verbal instructions and other specifications., • Uses various welding equipment (arc, acetylene, brazing, flame cutting) for lay out and fitting, including making jigs and fixtures., • Diagnoses and corrects trouble in the electrical system or equipment, applying standard computations related to load requirements of wiring or electrical equipment., • Performs visual and mechanical inspections to confirm machinery is in good condition, ensuring the production of finished quality products according to order specifications., • Follows the preventive maintenance program as established by the company and conducts equipment inspections, taking preventive action when necessary., • Maintains buildings, performing minor repairs., • Notifies management regarding the need for major repairs or additions to lighting, heating, and ventilating equipment., • Contributes to continuous improvement efforts in work area., • May be assigned additional projects or duties as designated by Team Leader., • Must be able to work with CMMS-Computerized Maintenance Management SystemQualifications, • High School Diploma or recognized equivalent., • Minimum of (2) two years related work experience in a maintenance mechanic function, or equivalent related experience., • Must demonstrate proficiency in resolving unexpected events and circumstance., • Hand and Power tools, • Shop Machine tools, • Testing equipment, • Ability to read different measuring devices (i.e. tape measure, protractor, micrometer)., • Must be able to read blueprints and electrical schematics, • Standing, walking, lifting 50 lbs. or more, pulling, pushing, carrying, grasping, reaching, stooping, crouching, near acuity,, • Frequently exposed to work near moving mechanical parts Additional Information Site Address: 7301 Fairview St., Houston, TX 77041 This is a position with potential overtime. The shifts are 8 hours, 10 hours, and 12 hours long depending on work orders for the day and season of the year. All your information will be kept confidential according to EEO guidelines Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or . If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or . This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Note to External Recruiters Cornerstone Building Brands does not accept unsolicited resumes and will not pay fees for any candidate submissions that were not expressly authorized. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Job Description ESSENTIAL DUTIES and RESPONSIBILITIES Greet and assist passengers in navigating through, and around the airport. Direct taxicabs to any and all persons requesting one. Dispatch a sufficient number of taxicabs to the terminal or to other loading points and the terminal. Assist passengers in acquiring their luxury limousines. Provide information to passengers who need assistance in getting to other forms of ground transportation. · Greet passengers at taxi curbside in Ground Transportation area of airport and offer them assistance or directions. Information provided to passengers must be accurate. • Direct passengers to the appropriate taxi/limo service., • Ensure that a sufficient number of taxicabs are available for the traveling passengers, and dispatch taxicabs to various loading points at terminal., • Communicate with drivers, co-workers, and supervisors and address any concerns. · Identify and report Rideshare operators not in compliance (i.e.) failing to display Trade Addresses, visible issues/damage to Rideshare vehicles. · Report Rideshare violations. • Must be 18 years of age or older at time of hire., • Minimum of high school education or GED and related factory experience, • Knowledge of metro area is desirable., • Customer service experience preferred., • Prior airport experience is preferred., • Must have an excellent attendance and arrive to work on time when scheduled and have access to reliable transportation. Special shift requirements, if any, will vary depending on a location's hiring needs. If applicable, availability to work 2nd shift, 3rd shift and/or week-ends may be required. PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; talk and listen. Employees are regularly exposed to outside weather conditions including snow storms, and extreme heat. This position is 100% outside work. WORK ENVIRONMENT Employees work in and around traffic situations, and employees are to be safety conscious at all times. Employees are frequently required to reach and or sign (communicate) with hands and arms. Employees on occasion must lift/move up to 50 lbs. Employees are regularly exposed to high levels of noise and/or fumes from either vehicles or airplanes. WILL BE REQUIRED TO PERFORM OTHER DUTIES AS REQUESTED, DIRECTED OR ASSIGNED Company DescriptionEngineering and Logistics Firm that provides service sectors include planning, civil, environmental, transportation, structural, water resources and water and wastewater engineering, program and construction management, the development of plans, specifications and estimates along with a cadre of other design engineering and construction phase services.Engineering and Logistics Firm that provides service sectors include planning, civil, environmental, transportation, structural, water resources and water and wastewater engineering, program and construction management, the development of plans, specifications and estimates along with a cadre of other design engineering and construction phase services.

Job Description Machine Shop Operator - 2nd Shift Houston, Texas Full-Time Role Summary/Purpose Plan and perform the set up and operation of an assigned CNC numerical controlled lathe to machine component parts in process of ferrous, non-ferrous and alloy metals. Work involves the assignment to either the NC/CNC Lathes, proving out computer programs in collaboration with Programmer, and following prescribed program, tooling, set up and offset specifications. Essential Responsibilities • Must be able to work from detail part drawings, work orders, set ups, tooling, process and operation instruction sheets, and digital program., • Set up and operate 2-axis lathes and operate 4-axis lathes on a wide range of products, receiving assistance from programmer or supervisor if needed., • Review parts program file and select set tools in tool holder, turret, or cross slide location., • Operate control console to enter program data, back off tool offsets, and check out with dry run. Edit the program as required., • Unload bar stock from delivery truck with overhead crane and place in intermediate storage area., • Load part, sequence each tool, enter offset adjustment data, and continue trails (as required) to produce piece meeting drawing specifications., • Inspect parts periodically in accordance with established frequency, for conformance to quality and engineering specifications, making offsets (as required) to compensate for tool wear., • Indicate work to detect and eliminate run out., • Tolerances are very strict and involve a demand for squareness, concentricity, and parallelism., • Detect and report faulty operations, defective material, and equipment, drawing discrepancies, and other unusual conditions to the proper supervisor., • Maintain workplace in neat and orderly condition. Qualifications/Requirements • GED or High School Diploma, • 1 - 2 years Manufacturing Experience Dresser is an Equal Opportunity Employer. We respect and seek to empower each individual and support the diverse cultures, perspectives, skills, and experiences within our workforce. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status, or other characteristics protected by law.

Job Description We're looking for automotive mechanics with a minimum of 3 years of professional automotive repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Experienced Auto Technician, you will perform a full range of automotive repairs—from light maintenance to heavy engine work—and diagnostics on our vehicles, including: • Performing general to complex repairs on all makes and models, ranging from timing belts and suspension systems to heavy engine work., • Diagnosing and repairing advanced vehicle electrical issues, including work on electric and hybrid vehicles. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 508-4749, Monday through Friday, between 6 AM and 4 PM MST. Not a match for this role? We have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers. • Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process. General qualifications and requirements • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English

Job DescriptionDescription: Imprimus Labels and Packaging is a well-established, highly reputable leader in the printing industry. With locations in California, Ohio, and Texas, we produce top-quality products for the demanding requirements of the cosmetics, personal health care, beverage, food, and dietary supplements markets. We are currently seeking a Label Finishing Operator to operate high-speed rewinding equipment and ensure finished labels meet customer quality specifications. Shift Schedule This position is for our 2nd, which runs Monday through Friday from 3:00 p.m. to midnight. Essential Duties and Responsibilities • Set up and operate high-speed slitter/rewind machines according to customer specifications and job tickets, • Cut, rewind, and count labels to precise quantities per production orders, • Inspect labels during rewinding to identify defects such as misprints, wrinkles, or out-of-register printing, • Remove defective labels and splice rolls as needed, • Complete core labels, carton labels, and required production documentation, • Ensure labels are properly boxed and identified without mixing products, • Follow all SOPs, work instructions, and customer specifications, • Communicate quality issues to press operators and supervisors, • Maintain a clean and organized work area and equipment, • 1–3 years of experience operating rewind, slitter, finishing, or similar converting equipment preferred, • Label printing or flexible packaging experience strongly preferred, • Ability to read and follow job jackets, production orders, and work instructions, • Strong attention to detail and quality, • Mechanical aptitude and the ability to troubleshoot minor issues, • Ability to stand for extended periods, • Ability to lift up to 50 pounds occasionally, • Frequent bending, reaching, and handling materials, • Ability to distinguish color variations and inspect print quality, • $50,000 employer-paid Life Insurance, • Medical plan through Blue Shield, • Dental and Vision insurance, • Flexible Spending Accounts (FSA), • Accident, Hospital Indemnity, Long Term Disability, and Critical Illness insurance, • Employee Assistance Program (EAP), • 401(k) with company match after 90 days, • Paid Time Off and Holiday Pay, • Benefits begin on the first of the month following hire Imprimus Labels and Packaging is an equal opportunity employer and makes employment decisions based on merit and business needs. We do not discriminate based on any protected characteristic under federal, state, or local law. Requirements:

Job DescriptionDescription: Lift-All Company, Inc Job Description Position Title: Wire Rope Splicer Department: Rope Department FLSA Status: Non-Exempt Effective Date: June 2019 Reports to: Plant Manager or Assistant Plant Manager Lift-All Company, a national manufacturer of material handling products, located in Houston TX, has an exciting opportunity to join our team on 2nd shift, 3pm - 11pm Monday thru Friday with the exception of training on 1st shift, 7am – 3pm Monday thru Friday for 1 month. Duties consist of working in our Wire Rope Department splicing and assembling wire rope into finished product. Position Summary: Perform all duties necessary to produce all varieties of wire rope assemblies according to established company methods, quality standards and production requirements. Education and/or Experience: High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. Language Skills: Ability to demonstrate understanding of company documents such as safety rules, work instructions, etc. Essential Duties and Responsibilities: Must be able to fulfill essential duties and responsibilities in a consistent state of alertness and safe manner. • Work in the department as a team member to produce wire rope assemblies per manufacturing specifications to achieve or exceed the production, quality standards and goals. Accesses inventory information on computer using manufacturing software program to issue materials, print and assign work orders and direct job assignments., • Set up, adjust and operate machines and equipment., • Understand and follow established best practices, department priorities and customer requirements. Read, understand and follow the JHA’s pertaining to the department., • Read, interpret and understand production sheets, manufacturing manual and corresponding reports and documents., • Select appropriate raw materials, hardware, tools, tags and equipment necessary to produce rope slings., • Identify and report any equipment, operational or safety problems or material deficiencies., • Understand and perform the Preventative Maintenance Program. Identify and report any maintenance issues on machines and equipment., • Move and handle materials as necessary., • Understand and follow the company inventory system., • Follow the departments’ house- keeping and safety requirements and standards., • Pack product as required., • Perform minor repairs to machines and equipment., • Provide training and instruction to other personnel as requested by Group Leader or Manager., • Perform other similar or associated duties as required. Assist in other areas of the plant as required.Requirements:

Job DescriptionBRAND NEW! 10 openings on each shift! Apply in person at 21840 Northwest Freeway Suite E Cypress, TX 77429! Job Title: General Warehouse Operators(Spanish Only OK) Location: Houston, TX 77095Job Type: Full-Time | Temp-to-Hire Pay: • 1st Shift: $12/hr (6:00 AM – 2:30 PM), • 2nd Shift: $12/hr (2:00 PM – 10:30 PM), • Receive plastic containers from a conveyor belt, • Trim excess plastic when needed, • Stack boxes onto pallets, • Perform basic quality checks, • Keep work area clean and organizedImportant:, • No machine operation required, • Employees will not interact directly with machineryWork Environment:, • Non-climate controlled warehouse, • Must be comfortable working in hot conditions (up to 120°ree;F in summer)Dress Code:, • Jeans, leggings, t-shirt (no shorts), • Must dress modestly, • Closed-toe shoes required (no additional PPE required)Requirements:, • Ability to stand for long periods, • Ability to lift and stack materials, • Reliable and punctual, • 1er Turno: $12/hora (6:00 AM – 2:30 PM), • 2do Turno: $12/hora (2:00 PM – 10:30 PM), • Recibir contenedores de plástico de una banda transportadora, • Recortar exceso de plástico cuando sea necesario, • Apilar cajas en tarimas (pallets), • Realizar inspecciones básicas de calidad, • Mantener el área limpia y organizadaImportante:, • No se requiere operar maquinaria, • No habrá interacción directa con máquinasAmbiente de Trabajo:, • Almacén sin aire acondicionado, • Debe estar dispuesto a trabajar en calor (hasta 120°ree;F en verano)Código de Vestimenta:, • Jeans, leggings o camisetas (no shorts), • Vestimenta modesta requerida, • Zapatos cerrados obligatorios (no se requiere PPE adicional)Requisitos:, • Capacidad para estar de pie por largos periodos, • Capacidad para levantar y apilar materiales, • Puntualidad y responsabilidad, • Disponibilidad para trabajar el turno asignado

Job Description Rotary Machine Operator – 2nd Shift Location: Cypress, TX Pay: $21–24/hr DOE Schedule: Monday–Friday | 3:30 PM–12:00 AM Opening Now hiring experienced Rotary Machine Operators for a manufacturing facility in Cypress, TX. Candidates with die cutting, converting, or related machine operation experience are preferred. Responsibilities • Operate rotary or die cutting machinery, • Set up machines for production runs, • Monitor production quality and output, • Make machine adjustments as needed, • Troubleshoot minor equipment issues, • Maintain safe and clean work areas Requirements • Prior rotary machine or die cutter experience required, • Manufacturing production experience preferred, • Mechanical troubleshooting ability, • Ability to follow production specifications, • Ability to work on your feet throughout the shift Apply Now Apply today to connect with a LINK Staffing recruiter about this opportunity. Company DescriptionAt LINK Staffing, we help job seekers like you find employment faster and more easily. Our team of staffing experts take the guesswork out of job hunting and help you find the right opportunities with less effort. Our unique commitment to enhanced employee benefits, payroll flexibility, and career development make us the perfect partner in finding opportunities throughout Texas.At LINK Staffing, we help job seekers like you find employment faster and more easily. Our team of staffing experts take the guesswork out of job hunting and help you find the right opportunities with less effort.\r\n\r\nOur unique commitment to enhanced employee benefits, payroll flexibility, and career development make us the perfect partner in finding opportunities throughout Texas.

Job DescriptionDescription: Lift-All Company, Inc Job Description Position Title: Sewer Department: Sewing Department FLSA Status: Non-Exempt Effective Date: June 2019 Reports to: Plant Manager or Assistant Plant Manager Lift-All Company, a manufacturing company located in Houston, TX (Greenspoint) is looking for a long term, dependable, hardworking Industrial Sewing Machine Operator for our 2nd shift Monday thru Friday 3 pm to 11 pm. Position Summary: Perform all duties necessary to produce all varieties of sewn products according to established company methods, quality standards and production requirements. Education and/or Experience: High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. Language Skills: Ability to demonstrate understanding of company documents such as safety rules, work instructions, etc. Essential Duties and Responsibilities: Must be able to fulfill essential duties and responsibilities in a consistent state of alertness and safe manner. • Adheres to company policies that create and maintain a safe workplace and follows departments housekeeping requirements., • Work in the department as a team member to produce and sew web products per manufacturing specifications to achieve or exceed the production, quality standards and goals., • Set up, adjust and operate machines and equipment., • Understand and follow established best practices, department priorities and customer requirements. Read, understand and follow the JHA’s pertaining to the department., • Read, interpret and understand production sheets, manufacturing manual and corresponding reports and documents., • Select appropriate raw materials, hardware, tools, tags and equipment necessary to produce and sew various web products., • Identify and report any equipment, operational or safety problems or material deficiencies., • Understand and perform the Preventative Maintenance Program. Identify and report any maintenance issues on machines and equipment., • Move and handle materials as necessary., • Understand and follow the company inventory system., • Pack product as required., • Perform minor repairs to machines and equipment., • Provide training and instruction to other personnel as requested by Group Leader or Manager., • Perform other similar or associated duties as required. Assist in other areas of the plant as required.Requirements:

Job Description JOB SUMMARY Rotating Machinery Services Inc. is seeking 2nd Shift Rotor Balancing Technician. This role will perform a variety of mechanical operations / tasks on turbomachinery components and assemblies to ensure compliance with specifications and quality requirements. We also have flexibility to train the right mechanically inclined candidate for this role. ESSENTIAL FUNCTIONS • Maintain a safe working environment and a commitment to safety excellence., • Responsible for understanding and complying with the safety policy, procedures, and instructions., • Assemble components in accordance with procedures, drawings, work instructions, and specifications., • Perform precision balancing on components and rotating assemblies to specified requirements., • Use calipers, gauges, micrometers & other measuring tools to determine the condition of components and assemblies., • Assemble various configurations of components to corresponding assembly prints utilizing available tooling, gauging and equipment., • Generate inspection reports as required and assist with documenting quality issues and solutions., • Maintaining a clean and organized work area., • Ability to understand assembly and manufacturing prints. Knowledge and/or Skill Requirements: The requirements below are the minimum requirements an employee needs to fulfill this position. They are representative of the knowledge, skills and ability required for the position. • Safety Conscience, • Ability to work in a team environment., • Ability and willingness to work overtime, weekends and holidays, as required., • Ability and willingness to work in an environment of constant pushing, pulling, lifting, stretching, bending and other physical activities., • Ability and willingness to be in the shop environment a minimum of 8 hours per day, primarily standing and sitting, as required., • Ability and willingness to work around and use large propane / acetylene torches., • Ability to operate small lifts, pallet jacks and other lifting equipment (training will be provided on our specific equipment, but basic skills are required beforehand)., • Basic oral and written communication skills., • Basic computer and math skills., • At least two years of experience working in an industrial or machine shop setting preferred., • The position will be based full time in our Houston, TX facility., • Evening and weekends depending on company needs., • Able to understand, read, write and speak English proficiently., • Authorized to work in the United States., • Able to pass a pre-employment drug and alcohol test, physical and background check., • While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift., • Ability and willingness to lift objects weighing up to 30 lbs., 50 lbs. with assistance., • Must be able to use hands for assembly and tool usage., • Competitive Pay, • Paid Time Off, • Medical / Dental / Vision, • 401k, • Employee Incentive Programs ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise—all backed by responsiveness in competitive prices and lead times. RMS’ commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description We're looking for automotive mechanics with a minimum of 3 years of professional automotive repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Experienced Auto Technician, you will perform a full range of automotive repairs—from light maintenance to heavy engine work—and diagnostics on our vehicles, including: • Performing general to complex repairs on all makes and models, ranging from timing belts and suspension systems to heavy engine work., • Diagnosing and repairing advanced vehicle electrical issues, including work on electric and hybrid vehicles. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 508-4749, Monday through Friday, between 6 AM and 4 PM MST. Not a match for this role? We have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers. • Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process. General qualifications and requirements • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English

Job Description Overview SP+, a Metropolis company, is an artificial intelligence company for the real world. We use computer vision to enable checkout-free parking experiences. So there’s no fumbling with tickets, machines, apps, or credit cards. You just “drive in and drive out.” We are the largest parking network in America, with over 23,000 employees powering mobility at over 4,000 locations across North America and Europe. Today, we are reinventing parking. Because it’s important, it's everywhere and impacts everyone. Tomorrow, we will power checkout-free experiences anywhere you go to make the everyday experiences of living, working, and playing remarkable - giving us back our most valuable asset, time. Responsibilities What you’ll do • Deliver on Our Promise by ensuring every moment matters for our clients by providing assistance when needed and communicating proactively., • Direct incoming customers to available parking spaces for a seamless parking experience., • Count vehicles on location throughout shift, as needed., • Write and issue violation warnings to tenants and visitors that violate garage policies; patrol transient and reserved parking levels as needed., • Provide assistance to customers that have forgotten where they parked their vehicle., • Responsible for being at work every scheduled day, on time and in uniform., • Control traffic at entrances and exits as needed., • Assist in the maintenance and repair of parking equipment and any general maintenance tasks as directed by the Facility Manager., • Report any known accidents, observed or suspected violations of Company policy, safety hazards or any unusual occurrence to the Facility Manager., • Communicate debris, water, oil spills and etc. to garage office., • Substitute for Valets when necessary, if authorized., • Have a thorough knowledge of all areas of the garage, thorough knowledge of the major streets, landmarks and freeways in the area of the garage to assist customers in a seamless transportation experience., • Assist Facility Manager with other duties as needed. Qualifications What you need • A valid state driver’s license, current address, and acceptable driving record., • The ability to safely drive a vehicle with a manual transmission (stick shift) is a plus., • Availability to work special shifts if needed (2nd, 3rd shift and/or weekends)., • Proof of eligibility to work legally in the U.S. (must provide valid documentation if hired)., • The ability to provide accurate information to customers and co-workers and respond professionally to customer problems or complaints., • The ability to read, write, add, and subtract US currency and comprehend instructions, short emails, and memos., • The ability to follow written and verbal instructions and calmly adapt to changes, delays, and unexpected events while working. Salary Range: $15.00 per hour (+ tips) This role is eligible to earn tips in addition to the posted hourly rate. Benefits: Eligible employees will participate in the various benefits plans including medical, dental, vision, flexible spending accounts, long/short term disability, life insurance, accident insurance, 401k and paid time off. SP+ is an equal opportunity employer committed in policy and practice to recruit, hire, train, and promote, in all job classifications, without regard to race, color, ancestry, religion, sex, age, national origin, citizenship status, marital status, sexual orientation, veteran status, gender identity, disability or other classes protected by federal or state law. SP+ does not tolerate harassment or retaliation against any employee or applicant based on these characteristics or because the individual exercised their EEO rights. Right to Work Poster SP+, a Metropolis Company, may utilize an automated employment decision tool (AEDT) to assess or evaluate your candidacy for employment or promotion. AEDTs are used to assist in assessing a candidate’s application relative to the required job qualifications and responsibilities listed in the job posting. As part of this process, SP+ retains data relevant to your candidacy, including personal information, for a period that is reasonably necessary for the use of the tool. If you are hired for the position, your data may become part of your employee records. If you are an applicant to a New York City job posting and wish to request an alternative selection process accommodation or have questions about our data retention policy, please contact . We are here to assist you.

Job Description Pay: $17.00 per hour Job description: Job Summary KS Staffing Group is currently hiring Warehouse Material Handler for a distribution warehouse in Jersey Village, TX. This position involves supporting daily warehouse operations, including handling materials, preparing orders, and maintaining an organized work environment. We are looking for dependable, detail-oriented individuals who take pride in accuracy, teamwork, and efficiency. If you enjoy staying active and working in a fast-paced warehouse environment, this could be a great opportunity for you. Jersey Village, TX $17 per hour 2nd Shift Available 2nd Shift: 3:30 PM – 12:00 AM Responsibilities • Pick, pack, and stage orders for shipment, • Verify product information and ensure order accuracy, • Load and unload materials safely and efficiently, • Maintain a clean and organized work area, • Report inventory discrepancies or damaged goods to a supervisor, • Previous warehouse experience required (scanning, inventory, shipping/receiving, or material handling), • Experience using RF scanners preferred, • Ability to lift up to 50 lbs and stand for most of the shift, • Strong attention to detail and accuracy, • Reliable, punctual, and able to work well in a team environment Equal Opportunity Employer KS Staffing Group is an Equal Opportunity Employer and provides equal employment opportunities without regard to race, color, religion, gender, national origin, age, disability, sexual orientation, marital status, or any other characteristic protected by law. Application Question(s): • How many years of warehouse experience do you have? Company DescriptionLet’s get started on starting your new career! Contact Us Today!! 281-815-4988Let’s get started on starting your new career!\r\nContact Us Today!! \r\n281-815-4988

Job Description JOB SUMMARY The CNC Lathe Machinist 2nd Shift will perform a variety of machining practices involved with turning, boring, drilling, threading operations, etc. on rotating equipment components (pumps, turbines, compressors, and more) and assemblies to ensure compliance with specifications and quality requirements. PRIMARY ROLE RESPONSIBILITIES • Ability and willingness to be in the shop environment a minimum of 8 hours per day, primarily standing and sitting., • Ability and willingness to work around and use large propane / acetylene., • Ability to operate small lifts, pallet jacks and other lifting equipment (training will be provided on our specific equipment, but basic skills are required beforehand)., • Advanced oral and written communication., • Advanced math skills to calculate tolerances and dimensions., • Must be able to read and understand Blueprints and G-Code., • Must be familiar with basic machining practices involved in turning, milling, drilling, threading operations., • Must be competent reading drawings and following instructions necessary to produce usable and saleable parts., • Must be proficient with the use of, the care of, and the calibration of all types of measuring devices (i.e., micrometers (OD and ID), dial calipers, dial indicators, etc.)., • Must possess and provide basic tools required for the execution of the position of machinist. The above list of activities is not all inclusive but a general representation of the requirements of an RMS CNC Lathe Machinist 2nd Shift. This list is subject to change based on the needs of the company. REQUIRED EXPERIENCE AND QUALIFICATIONS • 5 years or more of CNC Lathe Machinist experience required., • OMEGA experience, • Proficient in running horizontal lathes, milling machines, VTL, and Bullard., • Capable of reading drawings and proper use of calibrated measuring tools., • Read drawings and use of micrometers., • This position will be based full-time in our RMS Pearland Works facility located in Pearland, TX., • This is a full-time position, with a minimum expectation of 40 hours per week. Additional hours, including evenings or weekends, may be required based on project needs., • Ability and willingness to lift objects weighing up to 50 lbs., walk, climb, reach, kneel, crawl, and balance., • Must be able to use hands for assembly and tool usage., • While performing the duties of this position the employee will be required to stand, sit, bend and walk for significant portions of the shift, • Must not have allergies or issues related to handling metals including aluminum, copper, bronze, and steel., • This position can be required to participate in the company random or customer specific drug and alcohol screening and background check., • Able to understand, read, write, and speak English., • Must possess a valid driver’s license., • Able to pass a pre-employment drug, alcohol screening and background check., • Authorized to work in the United States. While performing the duties of this position, the employee will be regularly exposed to moving mechanical parts. While the work area may be described as generally clean, safe, and "not loud", there will be machining operations that generate moderate noise and metal particles. WHAT WE OFFER • Competitive Pay - Our target salary range for this role is between $30-$40 hourly. The final offer will be determined based upon the candidate's professional background, specialized certifications, and years of relevant experience., • Paid Time Off, • Medical / Dental / Vision, • 401k, • Employee Incentive Programs ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise—all backed by responsiveness in competitive prices and lead times. RMS’ commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description Overview SP+, a Metropolis company, is an artificial intelligence company for the real world. We use computer vision to enable checkout-free parking experiences. So there’s no fumbling with tickets, machines, apps, or credit cards. You just “drive in and drive out.” We are the largest parking network in America, with over 23,000 employees powering mobility at over 4,000 locations across North America and Europe. Today, we are reinventing parking. Because it’s important, it's everywhere and impacts everyone. Tomorrow, we will power checkout-free experiences anywhere you go to make the everyday experiences of living, working, and playing remarkable - giving us back our most valuable asset, time. Salary Range: $12.00 (+ tips) This role is eligible to earn tips in addition to the posted hourly rate. Responsibilities Position: Valet Driver Location: Cambria Hotel Houston Shift(s): Part-time, Flexible Availability Needed Pay: Base pay of $12/hr plus tips! If you are driven to succeed, you should join SP+. We are looking for safe Valet drivers with warm smiles who enjoy interacting with people. Work with our knowledgeable and caring team members who want to see you succeed, many of whom also started as valets. A job as a Valet could be the first step in your career. Come pave the way with SP+, a company driven by its three core values: Ingenuity, Diversity and Integrity. What you’ll do • Deliver on our Promise by ensuring every moment matters for our clients through resolving client requests and concerns efficiently, finding new ways to solve problems that may arise, and communicating proactively with clients., • Inspect every vehicle before safely parking it, noting all findings., • Explain valet rates to customers., • Observe traffic laws and safe driving practices., • Report all accidents, safety hazards, unusual occurrences, and policy violations to management., • Know the area's major streets, landmarks, and freeways to ensure customers have a seamless transportation experience., • Come to work in your clean uniform every scheduled shift, on time, and ready to work., • Remain in complete uniform for the entirety of your shift., • Assist management with additional duties as assigned. Qualifications What you need • A valid state driver’s license, current address, and acceptable driving record., • The ability to safely drive a vehicle with a manual transmission (stick shift) is a plus., • Availability to work special shifts if needed (2nd, 3rd shift and/or weekends)., • Proof of eligibility to work legally in the U.S. (must provide valid documentation if hired)., • The ability to provide accurate information to customers and co-workers and respond professionally to customer problems or complaints., • The ability to read, write, add, and subtract US currency and comprehend instructions, short emails, and memos. While performing the duties of this job, the employee is regularly required to stand; walk; and use hands to handle cash and equipment. The employee is occasionally required to sit and climb or balance. The employee must occasionally lift and/or move up to 25 pounds. Salary Range: $12.00 (+ tips) This role is eligible to earn tips in addition to the posted hourly rate. Benefits: Eligible employees will participate in the various benefits plans including medical, dental, vision, flexible spending accounts, long/short term disability, life insurance, accident insurance, 401k and paid time off. SP+ is an equal opportunity employer committed in policy and practice to recruit, hire, train, and promote, in all job classifications, without regard to race, color, ancestry, religion, sex, age, national origin, citizenship status, marital status, sexual orientation, veteran status, gender identity, disability or other classes protected by federal or state law. SP+ does not tolerate harassment or retaliation against any employee or applicant based on these characteristics or because the individual exercised their EEO rights. Right to Work Poster SP+, a Metropolis Company, may utilize an automated employment decision tool (AEDT) to assess or evaluate your candidacy for employment or promotion. AEDTs are used to assist in assessing a candidate’s application relative to the required job qualifications and responsibilities listed in the job posting. As part of this process, SP+ retains data relevant to your candidacy, including personal information, for a period that is reasonably necessary for the use of the tool. If you are hired for the position, your data may become part of your employee records. If you are an applicant to a New York City job posting and wish to request an alternative selection process accommodation or have questions about our data retention policy, please contact . We are here to assist you.

Job Description Labor One is hiring Journey-Level Shipfitters for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (956)382-2631; (956)247-2467; (281)965-2749 Walk-ins Accepted! Apply today! 815 Sheila Lane Channelview, TX 77530 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for performing, with minimal supervision, steel and aluminum structural work in all stages of repair and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships and barges. The position requires a working knowledge of procedures, strong mechanical aptitude and ability and be able to follow directions. The individual must possess experience in the trade, knowledge of ship terminology, blueprint reading, measurements, and the ability to interpret job specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Ability to comprehend instructions, drawings, and general correspondence., 2. Comprehensive understanding of ship repair terminology and ship compartment location nomenclature., 3. Be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Ability to write comprehensive Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 5. Ability to effectively confer job related information to the structural supervisor and small groups., 6. Ability to read and interpret structural drawings (including weld symbols), sketches, specifications, and NavSea standard items and Navy damage control diagrams., 7. Experience fabricating templates, squaring plates, scribing in structures, and installing perpendiculars on ships in accordance with drawings, specifications, or sketches., 8. Experience using oxy-acetylene torch for cutting and washing., 9. Welding experience: SMAW (S-11A) (fillet) FCAW (S-1) (fillet) GMAW (S-25) (fillet), 10. Experience using hand and power tools safely including but not limited to mauls, grinders, circular and reciprocating saws, and hand and magnetic drill., 11. Understand the proper use and operation of structural shop fabrication equipment, including shears, punches, and brakes., 12. Possess a working understanding of the aluminum 5XXX process., 13. Ability to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system., 14. Possess a working knowledge of, and be able to take measurements using the metric system., 15. Four (4) years of related experience. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and the shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 3. Work shifts and overtime as assigned., 4. Keeping the work area clean and safe at all times, especially at the end of the shift., 5. Understand relevant work processes, operation of equipment, and complete tasks proficiently., 6. Complete daily work assignments and provide status of unfinished work for shift turnover., 7. Use appropriate sections of NAVSEA, ABS, Coast Guard standards and manufacturer's tech manuals., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. -The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift Only 40 hours a week / OT on approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionJob Description JOB DETAILS Base pay starts at $17.50 per hour + $1.00 for Shift differential 2nd Shift starts: 4:30pm The Production Associate I is integral to our company’s product manufacturing process. This role is committed to executing all production-related tasks with precision and adherence to established protocols. By practicing safe work habits and following standard methodologies, the Production Associate I ensures that our production operations are both effective and secure. DUTIES AND RESPONSIBILITIES * Carry out tasks as directed by the department supervisor or team lead. * Engage in the assembly process, utilizing techniques such as sewing, cutting, clipping, and hooking to transform raw materials into sub-assemblies or final product. * Affix labels and tags to products and their packaging appropriately. * Prepare finished goods for shipping by packing them effectively. * Monitor production progress on schedule boards. * Report any equipment or material discrepancies to the supervisor promptly. * Organize finished products on the assigned pallet. * Uphold cleanliness and safety in the workplace. * Perform general labor duties across various departments. * Assist with hemming and the relocation of finished materials to trucks, utilizing overhead cranes and forklifts. * Operate comfortably in a manufacturing environment without temperature control. Qualifications • High school diploma or equivalent, • Some knowledge of a manufacturing environment, • Ability to work in a non-temperature-controlled environment, • Experience with side forklift, bander, nail gun, overhead crane, saws, stretch wrap machine, and various pneumatic equipment preferred, not required, • Ability to lift up to 50 pounds on a continual basis above shoulder height and below the waist Additional Information Site Address: 14031 W. Hardy Rd., Houston, TX 77060 This is a position with the potential overtime. The shifts are 8 hours, 10 hours, and 12 hours long depending on work orders for the day and season of the year. Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. You can also join one of our Employee Resource Groups which help support our commitment to providing a diverse and inclusive work environment. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. All your information will be kept confidential according to EEO guidelines Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or . If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or . This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Note to External Recruiters Cornerstone Building Brands does not accept unsolicited resumes and will not pay fees for any candidate submissions that were not expressly authorized. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Job Description THE ROLE The Machinist 2nd Shift will perform a variety of machining practices involved in turning, milling, drilling, threading operations, etc. on rotating equipment components (pumps, turbines, compressors, and more) and assemblies to ensure compliance with specifications and quality requirements. SKILLS REQUIRED ORGANIZATIONAL - Leadership & Organization: • Exceptional attention to details., • Display ownership and accountability for tasks and responsibilities., • Excellent interpersonal and customer service skills., • Excellent verbal and written communication skills., • Ability to work independently., • Ability to manage other projects and responsibilities that may be added at the company’s discretion., • Exceptional ability to multitask, prioritize, and manage time and resources effectively., • Ability to operate small lifts, pallet jacks and other lifting equipment (training will be provided on our specific equipment, but basic skills are required beforehand)., • Advanced oral and written communication., • Advanced math skills to calculate tolerances and dimensions., • Must be able to read and understand Blueprints and G-Code., • Must be familiar with basic machining practices involved in turning, milling, drilling, threading operations., • Must be competent reading drawings and following instructions necessary to produce usable and saleable parts., • Must be able to hold tolerances as dictated by drawings, written instructions, or industry standards., • Must be proficient with the use of, the care of, and the calibration of all types of measuring devices (i.e., micrometers (OD and ID), dial calipers, dial indicators, etc.)., • Must possess and provide basic tools required for the execution of the position of a machinist. The above list of activities is not all inclusive but a general representation of the requirements of an RMS Machinist 2nd Shift. This list is subject to change based on the needs of the company. REQUIRED EXPERIENCE & QUALIFICATIONS • Job shop experience a plus., • This position will be based full-time in our RMS Fusion facility located in Houston, TX., • This is a full-time position, with a minimum expectation of 40 hours per week. Additional hours, including evenings or weekends, may be required based on project needs., • Ability and willingness to lift objects weighing up to 30 lbs. (50 lbs. with assistance), walk, climb, reach, kneel, crawl, and balance., • Must be able to use hands for assembly and tool usage., • While performing the duties of this position the employee will be required to stand, sit, bend and walk for significant portions of the shift, • Must not have allergies or issues related to handling metals including aluminum, copper, bronze, and steel., • This position can be required to participate in the company random or customer specific drug and alcohol screening and background check., • Able to understand, read, write, and speak English., • Authorized to work in the United States., • Competitive Pay, • Paid Time Off, • Medical / Dental / Vision, • 401k, • Employee Incentive Programs ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise—all backed by responsiveness in competitive prices and lead times. RMS’ commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description Bonus: Eligible for up to $5,0000 RELOCATION AND HIRING BONUS Job Title: CNC Machinist Specialist (Expert Level) Department: Machine Shop Reports To: Supervisor of Department FLSA: Non-Exempt Status: Full-Time Shift: 1st & 2nd shift (4x10 Schedule) (1st 5:00 am - 3:00 PM) (2nd 2:45 PM - 12:45 AM) Location: Pueblo, CO (Relocation Assistance Available) Remote: On-Site Pay Range: $30.00-$39.00 Hourly About Gulftech International Our companies are the world’s recognized leaders in the engineering, manufacturing, leasing, selling, and servicing of industrial equipment and components serving food production and processing companies. Gulftech’s family of companies touches 90% of the world’s fresh produce, nuts, and fish products across 85 countries worldwide. About Gulfco Manufacturing Gulfco is a family-owned manufacturing organization with best-in-class operations and a “small company” culture that produces parts, equipment, and industrial solutions for the global food processing and packaging industries. As a proud member of the Gulftech family of companies, we serve as the turnkey supplier to a diverse portfolio of multi-national contract manufacturers, each of which is the leader in their respective market throughout the world. Job Summary Are you a skilled CNC Machinist who thrives on challenging setups and tight tolerances? This role goes beyond button-pushing — we need someone confident in setting up, dialing in, and producing complex, one-off, and low-volume parts with high precision. Responsibilities Must be a subject matter expert in the following functions/activities (perform correctly and without assistance): Able to Run Manual and CNC Machines at an expert Level. • Perform full setups on CNC mills and/or lathes from print or model — including indicating vises, fixtures, and part zeros., • Interpret complex blueprints, GD&T, and 3D models to execute machining strategies., • Adjust feeds, speeds, tooling, and offsets to optimize quality and efficiency., • Troubleshoot issues related to tooling, setup, and part accuracy independently., • Ensure in-process inspection and first article inspection compliance., • Collaborate with engineers and programmers to refine setups and improve processes. What You Bring: • 5+ years of CNC machining experience, with a strong emphasis on complex setups and first-run parts., • Strong proficiency in reading and interpreting technical drawings, GD&T, and setup sheets., • Strong understanding of machine offsets, tool presetting, and basic G/M code., • Experience with multi-axis machining or live tooling., • Strong understanding of machining processes and techniques., • Proficient in reading and interpreting blueprints and technical drawings., • Familiar with the use of precision measuring instruments like micrometers and calipers., • Solid understanding of lean manufacturing Benefits and Compensation • Two medical plans (PPO & HSA), dental, and vision insurance, • Paid time off, Vacation, and eight Holidays, • Employee assistance program (EAP), • 401k, • Profit sharing, • Free Life, • Free AD&D, • Free Disability insurance (Shot and Long-Term Disability), • Tuition Assistance, • Company cell phone/cell phone stipend *Salary information is a general guideline only. Actual compensation considers factors such as (but not limited to) the scope and responsibilities of the position, location, work experience, education, and key skills. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. *Gulfco Manufacturing is dedicated to the principles of equal employment opportunity in any term, condition, or privilege of employment. We do not discriminate against applicants or employees on the basis of age, ancestry, race, sex (including pregnancy and sexual orientation/gender identity), color, religion, national origin, parental status, marital status, political affiliation, family medical history or genetic information, military or veteran status, disability, medical condition, or any other non-merit based factor or status protected by federal, state or local law

Job Description Job Description WFI International Division of Bonney Forge, the leading manufacturer and supplier of integrally reinforced branch connection fittings to the power, oil and gas, chemical, and other industries, is looking for a CNC Machinist. WFI is an equal opportunity employer and makes employment decisions without regard to race, gender, disability, or protected veteran status. WFI International is a drug free workplace. Primary Responsibilities: · The CNC Machinist is responsible for the set up and operation of (CNC) VTL, lathes, and NC Mills. · Check work center status at the beginning of the shift and report any issues to the supervisor in charge. · Validate programs as required by producing a proof part for review. · Perform own first article inspection and make adjustments as necessary. · Perform in-process inspections of production parts to maintain and ensure dimensional accuracy. · Perform setups, edit programs and run production of parts. · Use precision gauges, micrometers and other applicable measurement instruments to validate compliance of product. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required to perform the essential duties. Education and/or Experience: · High School diploma or general education degree (GED). · Blueprint reading skills and measuring instruments knowledge required · 1-2 yrs. Experience on CNC Lathes and/or Mills. · Experience running VTLs or HBM preferred · Preferred 2+ years of experience on machining. Location: · Houston, TX Job Type: Full-time Pay: From $20.00 - $21.00 DOE per hour

Job DescriptionGopuff is looking for Operations Associates (OAs) to join the operations team. Directly reporting to a Site Leader, OAs play an essential role at Gopuff that requires drive, perseverance, positivity, and enthusiasm for the challenge. You will accomplish a variety of operations responsibilities including picking, packing, receiving product both within our site and accompanying kitchen (if applicable), and working with our partner drivers. Customers turn to Gopuff to provide their everyday essentials—day and night, rain or shine. We're assembling a team of thinkers, dreamers and risk takers who are ready to help us reshape the world of retail faster than ever before. And it doesn't hurt if you like snacks. Responsibilities: -Pick and pack items for dispatch to customers-Receive and unpack pallets of product from vendors, ensure physical inventory count matches purchase order/invoice, and resolve discrepancies-Manage inventory and re-shelving of canceled orders-Clean and organize sales floor and overall facility-Manage waste and spoilage through strict compliance with FIFO practice-Contact customer for substituted or out-of-stock items-Handle, scan and move product in a safe and well-organized manner-Stand, push, pull, squat, bend, reach and walk during shifts-Use carts, pallet jacks, dollies and other equipment to move product-Handle products that may contain tobacco, nicotine, and/or alcohol-Work in freezer locations periodically throughout shifts-Capability to walk several flights of steps periodically throughout the day-Prepare quality beverages and food menu items for all customers by observing all recipes and presentation standards-Ensure accuracy of all food and beverage packaged for delivery-Follow health, safety and sanitation guidelines for all products-Receive and put away order/invoice, and resolve discrepancies when they do not match expiration requirements-Maintain Kitchen Facility organization and standards to ensure resources can be accessed while managing waste and spoilage through mindful pouring and food preparation-Prepare, package and stage/handoff orders Qualifications:-High School Diploma or GED Equivalent-Experience working in a restaurant or retail environment (preferred, not required)-The ability to work a fluid schedule and be available during peak shifts (1st, 2nd, 3rd shifts)-General working knowledge of basic web-based software applications (e.g. Google G-Suite)-Stand and walk for the duration of an assigned shift-Lift up to 49 pounds-Available to work flexible hours that may include mornings, evenings, weekends, nights and holidays #LI-DNPWhat We Offer • Medical/Dental/Vision Insurance (for full-time employees), • 401(k) Retirement Savings Plan, • 25% employee discount & FAM Membership, • Vacation and Sick Time for eligible employees

Job Description JOB SUMMARY: Rotating Machinery Services, Inc. is seeking qualified Rotating Equipment Mechanics to work 2nd shift (3:00pm to 11:00pm) that will perform a variety of mechanical operations / tasks on turbomachinery components and assemblies to ensure compliance with specifications and quality requirements. This position requires experience working on pumps, gearboxes, compressors, and Blowers. SKILLS REQUIRED ORGANIZATIONAL - EXPERIENCE REQUIRED • Exceptional ability to multitask, prioritize, and manage time and resources effectively, • Excellent time management skills with a proven ability to meet deadlines., • Exceptional attention to details., • Display ownership and accountability for tasks and responsibilities., • Excellent interpersonal and customer service skills., • Excellent verbal and written communication skills., • Ability to manage other projects and responsibilities that may be added a the company's discretion., • Exceptional ability to multitask, prioritize, and manage time and resources effectively, • Installation, assembly and disassembly knowledge of turbo machinery., • Unit disassembly, cleaning, and inspection including the accurate collection and recording of technical inspection data for equipment repair proposals., • Maintain, diagnose, and repair all types of rotating equipment., • Complete required maintenance to return equipment back to customer operating condition, per OEM specifications., • Prepare and complete service documentation., • Maintain clear and concise daily work records. Use of basic problem-solving skills in terms of gathering facts, analyzing the cause, and selecting the best most accurate solution., • Maintenance of shop equipment and regular daily shop housekeeping to ensure an organized and safe working environment., • Responsible for understanding and complying with the safety policy, procedures, and instructions., • Dissassemble complex rotating equipment and provide written observations of failure modes and condition of “as received” parts, • Assist in cleaning and prepping parts for NDT and PMI examination., • Perform and document detailed dimensional and runout inspection of all components., • Provide written inspection report, to include recommended repairs, and replacement parts needed., • Provide written instructions and drawings to other crafts involved in the manufacture or repair of components., • Perform quality checks on customer furnished, manufactured, and repaired components prior to final assembly., • Clean and prep parts for final assembly., • Assemble equipment complete per OEM, ASME, API, or customer supplied specification., • Document all final sizes, clearances, and documentation to provide customer with a final repair report., • Complete “as received” photo documentation and visual inspection of assemblies and customer furnished spare parts., • Must be a team player and be willing to train junior mechanics, • The position requires good attendance and punctuality, • Knowledge and use of all types of measuring devices and rotating equipment, • Supply basic mechanics tools and measuring devices required to complete work as assigned REQUIRED EXPERIENCE & QUALIFICATIONS • NCCER Millwright certification preferred, • The position may be based in RMS’s South Houston, TX facility., • This is a full-time position, with a minimum expectation of 40 hours per week. Additional hours, including evenings or weekends, may be required based on project needs., • This position can be required to participate in the company random or customer specific drug and alcohol screening and background check., • Must possess a valid driver’s license, • Ability to pass pre-employment drug, alcohol test, and background check., • Ability to act professionally under stressful situations., • Able to understand, read, write and speak English., • Ability and willingness to lift objects weighing up to 50 lbs. (with assistance), walk, climb, reach, kneel, crawl, and balance., • Must be able to use hands for assembling and tool usage, • While performing the duties of this position the employee will be required to stand, sit, bend, and walk for significant portions of the shift, • Must not have allergies or issues related to handling metals, including aluminum, copper, bronze, and steel., • Authorized to work in the United States While performing the duties of this position, the employee will be regularly exposed to moving mechanical parts. While the work area may be described as generally clean, safe, and "not loud", there will be machining operations that generate moderate noise and metal particles. WHAT WE OFFER • Competitive Pay, • Paid Time Off, • Medical / Dental / Vision, • 401k, • Employee Incentive Programs Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise—all backed by responsiveness in competitive prices and lead times. RMS’ commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description Overview SP+, a Metropolis company, is an artificial intelligence company for the real world. We use computer vision to enable checkout-free parking experiences. So there’s no fumbling with tickets, machines, apps, or credit cards. You just “drive in and drive out.” We are the largest parking network in America, with over 23,000 employees powering mobility at over 4,000 locations across North America and Europe. Today, we are reinventing parking. Because it’s important, it's everywhere and impacts everyone. Tomorrow, we will power checkout-free experiences anywhere you go to make the everyday experiences of living, working, and playing remarkable - giving us back our most valuable asset, time. Responsibilities Basic Function - Ensure that appropriate number of cars is kept on location throughout shift, cars are being parked in an appropriate fashion and the lot is kept clean and presentable. • Direct incoming customers to available parking spaces., • Count vehicles on location throughout shift, as needed., • Write and issue violation warnings to tenants and visitors that violate garage policies., • Patrol transient and reserved parking levels on foot or in customized motor carts, if applicable., • Provide assistance to customers that have forgotten where they parked their vehicle., • Responsible for being at work every scheduled day, on time and in uniform., • Courteously assist Customers by answering any questions they may have. If necessary, direct the Customer to the Facility Manager for further assistance., • Control traffic at entrances and exits as needed., • Assist in the maintenance and repair of parking equipment and any general maintenance tasks as directed by the Facility Manager., • Report any known accidents, observed or suspected violations of Company policy, safety hazards or any unusual occurrence to the Facility Manager., • Communicate debris, water, oil spills and etc. to garage office., • Substitute for Valets when necessary, if authorized., • Have a thorough knowledge of all areas of the garage, thorough knowledge of the major streets, landmarks and freeways in the area of the garage., • Assist Facility Manager with other duties as needed. Qualifications Qualification Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience Required: Less than High School education or one month related experience, training or an equivalent combination of education and experience. License Requirement: The individual will only be required to have and maintain a valid state-issued driver’s license, with a current address and acceptable driving record, if the individual is expected to be able to drive a company vehicle or drive on company business. Availability to Work: Special shift requirements, if any, will vary depending on a location's hiring needs. If applicable, availability to work 2nd shift, 3rd shift and/or week-ends may be required. Language Skills: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one situations to customers and other employees of the company. Mathematical Skills: Ability to add, subtract, two digit numbers and multiply and divide with 10’s and 100’s. Ability to perform these operations using units of American money. Appearance: Employees will be required to maintain a neat and clean appearance and be in complete uniform at all times. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; and use hands to handle cash and equipment. The employee is occasionally required to sit and climb or balance. The employee must occasionally lift and/or move up to 25 pounds. Salary Range: $15.00 per hour Benefits: Eligible employees will participate in the various benefits plans including medical, dental, vision, flexible spending accounts, long/short term disability, life insurance, accident insurance, 401k and paid time off. SP+ is an equal opportunity employer committed in policy and practice to recruit, hire, train, and promote, in all job classifications, without regard to race, color, ancestry, religion, sex, age, national origin, citizenship status, marital status, sexual orientation, veteran status, gender identity, disability or other classes protected by federal or state law. SP+ does not tolerate harassment or retaliation against any employee or applicant based on these characteristics or because the individual exercised their EEO rights. Right to Work Poster SP+, a Metropolis Company, may utilize an automated employment decision tool (AEDT) to assess or evaluate your candidacy for employment or promotion. AEDTs are used to assist in assessing a candidate’s application relative to the required job qualifications and responsibilities listed in the job posting. As part of this process, SP+ retains data relevant to your candidacy, including personal information, for a period that is reasonably necessary for the use of the tool. If you are hired for the position, your data may become part of your employee records. If you are an applicant to a New York City job posting and wish to request an alternative selection process accommodation or have questions about our data retention policy, please contact . We are here to assist you.

Job DescriptionDescription: The Powder Coat Painter is primarily responsible for spray painting. This includes verifying work orders for coating requirements. Essential Job Responsibilities not limited to: • Preparing: Pretreating, cleaning, masking, and priming parts, • Applying: Spraying powder coat onto surfaces, • Inspecting: Performing quality checks, including first piece, in-process, and final inspections, • Maintaining: Adjusting sprayer valves and nozzles, and maintaining and organizing the powder storage room, • Ability to read and interpret shop drawings, • Basic math knowledge which includes the use of measuring tools, • Familiar with mixing process of paint colors, • Ability to work in an environment that produces excellent quality and quantity work, • Ability to organize and prioritize jobs, • Able to stand for long periods of time, • Able to lift, push, and pull 25 pounds unassisted, • Typical machine shop environment., • Willing and able to work additional hours as needed to ensure responsibilities are met., • High School diploma or GED, • Shop experience spray painting, • Experience in disassembling spray gun and cleaning out lines, operating forklift and overhead crane At VMC Group we believe in supporting our employees both professionally and personally. When you join our team, you gain more than just a job — you gain access to a range of benefits designed to promote your well-being, growth, and financial security. • Health, dental and vision insurance, • 401K with company match, • Life Insurance, • Flexible Spending Accounts, • Generous annual time off policy, • 12 Company-Paid holidays, • A Solid Wellness Program to support your personal health goals We provide equal employment opportunities to all applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic.

Job Description Overview SP+, a Metropolis company, is an artificial intelligence company for the real world. We use computer vision to enable checkout-free parking experiences. So there’s no fumbling with tickets, machines, apps, or credit cards. You just “drive in and drive out.” We are the largest parking network in America, with over 23,000 employees powering mobility at over 4,000 locations across North America and Europe. Today, we are reinventing parking. Because it’s important, it's everywhere and impacts everyone. Tomorrow, we will power checkout-free experiences anywhere you go to make the everyday experiences of living, working, and playing remarkable - giving us back our most valuable asset, time. Responsibilities If you are driven to succeed, you should join SP+. We are looking for safe Valet drivers with warm smiles who enjoy interacting with people. Work with our knowledgeable and caring team members who want to see you succeed, many of whom also started as valets. A job as a Valet could be the first step in your career. Come pave the way with SP+, a company driven by its three core values: Ingenuity, Diversity and Integrity. What you’ll do • Deliver on our Promise by ensuring every moment matters for our clients through resolving client requests and concerns efficiently, finding new ways to solve problems that may arise, and communicating proactively with clients., • Inspect every vehicle before safely parking it, noting all findings., • Explain valet rates to customers., • Observe traffic laws and safe driving practices., • Report all accidents, safety hazards, unusual occurrences, and policy violations to management., • Know the area's major streets, landmarks, and freeways to ensure customers have a seamless transportation experience., • Come to work in your clean uniform every scheduled shift, on time, and ready to work., • Remain in complete uniform for the entirety of your shift., • Assist management with additional duties as assigned. Qualifications What you need • A valid state driver’s license, current address, and acceptable driving record., • The ability to safely drive a vehicle with a manual transmission (stick shift) is a plus., • Availability to work special shifts if needed (2nd, 3rd shift and/or weekends)., • Proof of eligibility to work legally in the U.S. (must provide valid documentation if hired)., • The ability to provide accurate information to customers and co-workers and respond professionally to customer problems or complaints., • The ability to read, write, add, and subtract US currency and comprehend instructions, short emails, and memos. While performing the duties of this job, the employee is regularly required to stand; walk; and use hands to handle cash and equipment. The employee is occasionally required to sit and climb or balance. The employee must occasionally lift and/or move up to 25 pounds. Salary Range: $9.00 - $12.00 per hour (+ tips) This role is eligible to earn tips in addition to the posted hourly rate. Benefits: Eligible employees will participate in the various benefits plans including medical, dental, vision, flexible spending accounts, long/short term disability, life insurance, accident insurance, 401k and paid time off. SP+ is an equal opportunity employer committed in policy and practice to recruit, hire, train, and promote, in all job classifications, without regard to race, color, ancestry, religion, sex, age, national origin, citizenship status, marital status, sexual orientation, veteran status, gender identity, disability or other classes protected by federal or state law. SP+ does not tolerate harassment or retaliation against any employee or applicant based on these characteristics or because the individual exercised their EEO rights. Right to Work Poster SP+, a Metropolis Company, may utilize an automated employment decision tool (AEDT) to assess or evaluate your candidacy for employment or promotion. AEDTs are used to assist in assessing a candidate’s application relative to the required job qualifications and responsibilities listed in the job posting. As part of this process, SP+ retains data relevant to your candidacy, including personal information, for a period that is reasonably necessary for the use of the tool. If you are hired for the position, your data may become part of your employee records. If you are an applicant to a New York City job posting and wish to request an alternative selection process accommodation or have questions about our data retention policy, please contact . We are here to assist you.

Job DescriptionPurpose of the Position As an Industrial Engineer, you will lead factory layout design, optimization, and Shop Floor Control (SFC) system implementation to improve production efficiency and operational performance. This role focuses on optimizing workflows, reducing waste through lean methodologies, and driving continuous improvement initiatives across manufacturing operations. Duties and Responsibilities * Design and optimize plant and production line layouts using AutoCAD and simulation tools (e.g., FlexSim) to improve workflow, space utilization, and throughput; * Reduce material handling and logistics costs through lean planning and process optimization; * Lead Kaizen and ECRS initiatives to eliminate waste, standardize work, and enhance operational efficiency; * Analyze and improve line balancing to maximize labor productivity and output performance; * Develop and maintain Shop Floor Control (SFC) systems, including error-proofing logic and rework routing setup; * Support and optimize MES/SFC-related system integration to improve shop floor visibility and traceability; * Design and prepare production labels in accordance with F1 requirements and conduct label sample First Article Inspections (FAI); * Collaborate cross-functionally with production, maintenance, IT, and other support teams to drive continuous improvement and resolve operational issues; * Provide daily on-site manufacturing support to ensure stable, efficient, and compliant operations. Education and Work Experience Education: Bachelor’s degree or above Major: Industrial Engineering, Information Technology, or related field Work Experience: * 2–3+ years of manufacturing or Industrial Engineering experience * Experience in layout design, process improvement, and production system optimization * SMT manufacturing experience is a plus * Hands-on exposure to Shop Floor Control or production execution systems preferred Working Conditions The work environment includes office areas and extensive factory floor activities in a fast-paced, high-volume manufacturing facility. Daily on-site presence is required to monitor operations, troubleshoot issues, and support production. This position may require assignment to the 2nd shift and occasional weekend work to support production schedules, deadlines, or project implementations. Skills Core Competencies: Collaborates | Drives results | Problem solving | Ensures accountability | Continuous improvement mindset Functional Competencies: Plant layout design | Lean Manufacturing | Kaizen/ECRS | Line balancing | Shop Floor Control (SFC) | MES systems | Production system optimization | Cross-functional coordination Technical Skills: Proficiency in AutoCAD and simulation tools (e.g., FlexSim); knowledge of Lean Manufacturing, MOST, and Six Sigma methodologies; working knowledge of MES, SFC, SAP, or SSP systems Language Skills: Fluent in English required; Chinese/Mandarin proficiency is a plus Powered by JazzHR 1SVDvJ4X5J

Job Description Labor One is hiring Journey-Level Pipefitters for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (956)382-2631; (956)247-2467; (281)965-2749 Walk-ins Accepted! Apply today! 815 Sheila Lane Channelview, TX 77530 Office Hours: 8:00 AM-5:00 PM General Information Job Description: A pipefitter journeyman is responsible for removing, repairing, targeting, laying out, fabricating, installing, and testing marine piping systems such as Auxiliary Salt Water, Fire Main, Potable Water, Hydraulic, Compressed Air, Fuel Oil, Lube Oil, Engine Exhaust etc. in accordance with work item specifications, NAVSEA/Military standards and drawings or other regulatory body standards such as ABS, Military Sealift Command, etc. Repair and fabrication include the use of various shop equipment such as table saws, pipe threading machines, bending machines (power as well as hand operated), drill presses and brazing equipment. Additional tasks associated with this position include blanking and pressure testing of tanks (structural boundary testing). The journeyman is also responsible for providing direction to improvers and helpers as directed by the supervisor. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a comprehensive knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information such as conditions found reports in writing that include recommended corrective action., 5. Must have a thorough knowledge of experience with P-73 joint fit-up., 6. Must have a comprehensive knowledge of Silver Brazing theory., 8. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 9. Must possess a comprehensive knowledge of equipment and work processes used in marine pipe fabrication, repair, and targeting., 10. Must be able to operate and care for equipment, portable power tools, and hand tools used to accomplish assigned work., 11. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 12. Must have six (6) years of pipefitting experience, four (3) of which in the maritime repair environment. DUTIES AND RESPONSIBILITIES 1. Provide direction to a pipefitter Improver and Helper if assigned., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor., 3. Work shifts and overtime as assigned., 4. Be accountable for completion of daily work assignments., 5. Comply with OSHA standards and shipyard's best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Confer with the supervisor to resolve unexpected events related to your assigned task. Carry out written or oral instructions. Work Tasks Include: a. Inspect and prepare the area for work, taking special care if hot work is required. Verify gas free certifications and tag-outs, before commencing any work. b. Run lines and leads required to accomplish work. Accomplish drop test if using flammable or oxygen depleting gases. c. Inspect work for defects before turning the job over to welders. Correct fit-ups as required.. Confer with supervision before correcting deficiencies. d. Document existing conditions before commencing work using Condition Found Reports (CFR). e. Remove damaged pipe in accordance with drawings and specifications. f. Measure or template pipe for fabrication. g. Blank systems in accordance with standard Item 009-24 or other applicable safety standards. h. Fit up new pipe using the proper fit up type in accordance with specifications. i. Ensure a strain free fit-up to pumps or other connecting equipment. j. Blank tanks and accomplish boundary air tests. k. Accomplish or verify Lock-out Tag-out requirements before commencing. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 75 lbs on an occasional basis (0-25% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (25-75% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift only 40 hours a week / OT with approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Clayton Services is searching for a Material Handler to join a thriving company in the North Houston area. The Material Handler will be responsible for assisting with the shipment and receipt of all products, materials, and supplies. Job Type: Temp-to-Hire Pay: $22.00/hour plus OT Benefits: Excellent benefits are available after the successful completion of the temporary period, including medical, dental, vision, 401k, PTO, and more. Schedule: 2nd Shift - Monday - Friday, 4:45 PM - 3:15 AM with weekend availability required Material Handler Duties & Responsibilities: • Foster collaboration and communication with logistics technicians, sales representatives, service providers, and other stakeholders engaged in product shipment and receipt., • Execute the loading and unloading incoming containers and outgoing truckload shipments, handling various components such as parts, compressors, and systems., • Attach appropriate tags to parts and compressors per company specifications., • Uphold compliance with health and safety laws, regulations, and industry best practices., • Carry out additional responsibilities as delegated. Material Handler Skills & Requirements: • Ability to function well in a high-paced and, at times, stressful environment., • Excellent mechanical skills., • Excellent problem-solving and analytical skills., • Excellent communication skills., • Ability to work in a team environment., • Ability to use power and hand tools., • Ability to follow instructions. Material Handler Education & Experience: • A high school diploma is required., • Forklift training is required., • Must have sit-down forklift experience moving equipment 15,000-22,000 lbs. Material Handler - Immediate need. Apply today!

Job Description General Technologies, Inc. is looking to hire a Production Supervisor to provide additional support to our team! Purpose: Accomplishes manufacturing staff results by communicating job expectations; planning, monitoring, and appraising job results; coaching, counseling, and disciplining employees; initiating, coordinating, and enforcing systems, policies, and procedures. Responsibilities (Include but are not limited to): • Set daily objectives and communicate them to employees, • Organize workflow by assigning responsibilities and preparing schedules, • Oversee and coach employees on a daily basis, • Ensure the safe use of equipment and tools on a daily basis, • Check production output according to specifications, • Submit reports on performance and progress, • Identify issues in efficiency and suggest improvements, • Assure that new employees are receiving adequate training on how to safely use machinery and are following procedures, • Ensure housekeeping is maintained on a daily basis, • Maintain positive employee relations and adhere to Company policies and safety standards, • Proven experience as Production Supervisor or similar role, • 2-3 years' experience of 'hands-on' injection molding, • Experience in using various types of manufacturing machinery and tools, • Must be able to troubleshoot and adjust molding parameters to maintain quality and maximum output, • Must be able to respond to problems by performing corrective technical or mechanical solutions, • Must be able to engage in frequent bending, stooping, squatting, pushing and pulling of parts and part containers, • Must be flexible; able to work extended hours and weekends when required, • May be required to sit or stand for long periods of time, • Must be able to lift up to 50 pounds, • Basic knowledge in MS Office, • Organizational and leadership abilities, • Communication and interpersonal skills, • Self-motivated with a results-driven approach, • Problem-solving skills, • High School Diploma; Degree in a technical, engineering or relevant field will be an advantage, • Bilingual (English & Spanish) is not mandatory but is a plus Schedule: • Mon-Fri 1:45pm-11:15pm, • Must be able to work overtime and on weekends when needed Physical Demands: The description below is intended to describe the general content and requirements for the performance of this job but is not limited to: • While performing the duties of the job, the employee may be required to stand; walk; sit; use hands to finger, handle or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop, kneel, crouch or crawl; talk or hear; taste or smell., • The employee must be able to lift and/or move up to 50lbs., • Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Some duties may be removed at any time and new duties may be added as GTI continues to grow. If and as required under federal or state law, upon request, reasonable accommodations which do not create an undue hardship will be considered, discussed, offered and implemented (if accepted) to enable persons with defined disabilities to overcome barriers to the performance of essential functions of the position. Job Posted by ApplicantPro

Job DescriptionDescription: We are seeking a skilled Welder/Fitter to join our team. As a Bench Welder - 2nd Shift, you will be responsible for fabricating and assembling metal structures and equipment. This is a full-time position with competitive pay and benefits. Responsibilities not limited to: • Perform welding and soldering tasks to join metal components, • Read and interpret blueprints, schematics, and engineering drawings, • Use basic math skills to measure, cut, and shape metal pieces, • Operate various tools and equipment such as welding machines, grinders, and calipers, • Assemble and weld components according to specifications, • Inspect finished products for quality and accuracy, • Collaborate with team members to ensure efficient workflow, • Proficient in various welding techniques, including stick welding, • Knowledge of ductwork fabrication and installation, • Ability to read and interpret blueprints, schematics, and engineering drawings, • Strong attention to detail and accuracy in measurements, • Familiarity with operating press brake machines is a plus, • Basic math skills for measurements and calculations, • Ability to use calipers for precise measurements, • Strong problem-solving skills to troubleshoot issues during the fabrication process At VMC Group we believe in supporting our employees both professionally and personally. When you join our team, you gain more than just a job — you gain access to a range of benefits designed to promote your well-being, growth, and financial security. • Health, dental and vision insurance, • 401K with company match, • Life Insurance, • Flexible Spending Accounts, • Generous annual time off policy, • 12 Company-Paid holidays, • A Solid Wellness Program to support your personal health goals We provide equal employment opportunities to all applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic.

Job DescriptionWarehouse Associate 2nd Shift • Competitive pay $19-$22 + $1 differential, • Temp to hire, • The position is in Houston, Texas 77051, • Monday-Friday 2:00 pm-11:00 pm Your New Role: As a Warehouse Associate, you will assist in the loading and unloading of pipes from trucks or other transportation vehicles. You will maintain accurate records of the types, quantities, and locations of pipes in the yard. Warehouse Associate Responsibilities:, • Maintain inventory, • Shipping and Receiving, • Loading and unloading, • Order picking, Order Pulling, • Operate heavy machinery such as cherry pickers and forklifts Warehouse Associate Qualifications:, • High School Diploma or GED, • Cherry Picker experience, • PVF and RF Scanner experience a plus, • Must be able to pass pre-employment screenings. Your New Organization: Enjoy competitive compensation, health, vision, and dental insurance plans, and a 401(K) plan. Get paid weekly through direct deposit for every hour you work. When you partner with The Reserves Network, you get to work with experienced recruiters who will advise you on all aspects of your job search and career aspirations. Ready to take control of the way you work? Complete our application today and join The Reserves Network team, where your skills and contributions will be valued and rewarded. For additional information, call 281-724-4930. Your Career Partner: Veteran-founded and family-owned, The Reserves Network specializes in connecting exceptional talent with rewarding opportunities. With our extensive industry experience, we are dedicated to helping you achieve your professional goals and shine in your field. Please submit your application for consideration in this and other positions and gain exclusive access to our mobile app for job notifications.As an equal-opportunity employer, we value our employees and foster an environment of respect, integrity, and trust in every aspect of employment. However, you identify and whatever your background, we encourage you to apply today.

Job DescriptionChecker / Loader Shift: 12:00 PM – 8:30 PM, days vary (40 hours guaranteed weekly) Pay: $17.00 per hourLocation: Houston, TX 77092Job Summary The Checker/Loader is an entry-level position within our bakery distribution operations. This role supports front-line distribution activities, including order selection, product handling, and loading and unloading delivery trucks. This position plays a key role in ensuring accurate order fulfillment while maintaining food safety and quality standards.Job Duties and Responsibilities • Pick, check, and load orders accurately for assigned delivery routes, • Move, stack, organize, and handle bakery products using trays, racks, or carts, • Use pick-to-light systems or voice-activated picking equipment as required, • Load and unload delivery trucks in a safe and efficient manner, • Verify product counts and ensure correct products are selected for each route, • Follow all food safety, food quality, and sanitation procedures at all times, • Report and take appropriate action regarding food safety or quality concerns, • Maintain a clean, organized, and safe work environment, • Perform additional warehouse or distribution duties as assignedQualifications and Requirements, • Ability to lift up to 50 pounds on a regular basis, • Ability to stack, carry, push, and pull trays or carts of product, • Ability to work in a fast-paced, physical environment, • Basic math and counting skills, • Ability to follow written and verbal instructions, • Strong attention to detail and commitment to workplace safety, • Willingness to comply with company policies and food safety standardsWork Environment, • Standing, walking, lifting, bending, and reaching throughout the shift, • Warehouse, bakery, or distribution center environment, • Exposure to varying temperatures#76HO

Job Description Job Title: Press Operator (1st or 2nd Shift) Job Description The candidate will be responsible for operating compression mold machines to produce rubber or plastic rings and seals used in the oil and gas industry. This involves measuring powders and materials to ensure the proper consistency, setting up the machine, and operating the hydraulic press to mold rubber preforms into seals. Responsibilities • Inspect first run parts for defects and make necessary adjustments prior to production., • Turn, stack, and straighten preforms and parts while they are in the press., • Load press platens uniformly with molds of equal height., • Handle molds with care to prevent denting or galling of critical machined surfaces, and report any damage to molds or machines to the manager., • Verify that preforms fit molds properly and report discrepancies to the Crew Lead., • At least 2+ years of experience in press operating in a machine shop., • Ability to lift up to 50lbs., • Experience in production/manufacturing and general labor. Join a dynamic team where your skills contribute directly to the oil and gas industry's essential operations. Enjoy a collaborative environment with opportunities for personal growth and skill development. Work Environment The role operates in a shop environment during the 1st or 2nd shift (have spots open for both) either from 6AM-3PM or 4PM-12AM. Safety is a priority, requiring steel-toed shoes and safety glasses. Job Type & Location This is a Contract to Hire position based out of Humble, TX. Pay and Benefits The pay range for this position is $18.80 - $18.80/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionCompany Description Cornerstone Building Brands is a leading manufacturer of exterior building products for residential and low-rise non-residential buildings in North America. Headquartered in Cary, N.C., we serve residential and commercial customers across the new construction and Repair & Remodel (R&R) markets. Our market-leading portfolio of products spans vinyl windows, vinyl siding, stone veneer, metal roofing, metal wall systems and metal accessories. Cornerstone Building Brands’ broad, multi-channel distribution platform and expansive national footprint includes more than 18,800 team members at manufacturing, distribution and office locations throughout North America. Corporate stewardship and Environmental, Social and Governance (ESG) responsibility are embedded in our culture. We are committed to contributing positively to the communities where we live, work and play. For more information, visit us at . Job Description JOB DETAILS Base pay starts at $22.00 per hour plus $1.00 shift differential 2nd Shift starts: 6:00PM, hours may vary depending on operations This is a position with the potential overtime. The shifts are 8 hours, 10 hours, and 12 hours long depending on work orders for the day and season of the year. DUTIES AND RESPONSIBILITIES The Fitter/Welder must be competent in welding and fitting skills which encompass all special welding certifications for pipe, tube, CJP scenarios etc. Must be able to fit up all types of rigid frame columns, rafters, and beam canopies according to specifications. • Knows and understands all safety rules and precautions necessary for working in and about a manufacturing environment, • Must be able to achieve and maintain AWS and CWB certifications, • Check work assignments and interprets blueprints and/or sketches to determine parts required, • Responsible for measuring, marking, counting, and locating components on/in an assembly. Advises Team Leader of any discrepancies in and/or shortages of required parts, • Positions sub-assemblies on parts using clamping devices and material handling equipment as required, • Uses necessary tools, measuring devices, templates to join up parts in accordance with blueprints and specifications maintaining allowable tolerances. Uses welding, flame cutting, flame-heating, arc gouging, or mechanical equipment to tack and/or weld components in place. Ability to align parts, and to bevel or cut flanges, webs, stiffeners as required, • Install metal tags to identify parts and uses assigned personal identification stamp in designated area when operation is completed, • Responsible for keeping numerical and alphabetical sequences correct, • Maintains continuous improvement practices in work area, • May be assigned other projects or duties as designated by Team LeaderQualifications, • High School Diploma or equivalent (GED), • A minimum of one (1) year experience welding and fitting in a production environment or valid welding certification, • Ability to read blueprints and drawings, • Ability to obtain and maintain CWB and AWS welding certification in accordance with Cornerstone Building Brands welding procedures, • Experience with forklift and/or overhead crane operation a plus, • Ability to lift up to 75 pounds on a continual basis above shoulder height and below the waist Additional Information Site Address: 7301 Fairview Street, Houston, TX 77041 This is a position with the potential overtime. The shifts are 8 hours, 10 hours, and 12 hours long depending on work orders for the day and season of the year. All your information will be kept confidential according to EEO guidelines. Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or . If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or . This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Note to External Recruiters Cornerstone Building Brands does not accept unsolicited resumes and will not pay fees for any candidate submissions that were not expressly authorized. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Job Description We're looking for automotive mechanics with a minimum of 3 years of professional automotive repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Experienced Auto Technician, you will perform a full range of automotive repairs—from light maintenance to heavy engine work—and diagnostics on our vehicles, including: • Performing general to complex repairs on all makes and models, ranging from timing belts and suspension systems to heavy engine work., • Diagnosing and repairing advanced vehicle electrical issues, including work on electric and hybrid vehicles. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 508-4749, Monday through Friday, between 6 AM and 4 PM MST. Not a match for this role? We have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers. • Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process. General qualifications and requirements • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English

Job DescriptionDescription: POSITION SUMMARY: The Maintenance Supervisor is responsible for supervising a maintenance shop that is under the umbrella responsibility of a Maintenance Manager. The Maintenance Supervisor's responsibilities include supervising a technician (mechanic) team responsible for preventive maintenance/repair of a fleet; machinery that supports a post-collection facility; repair/maintenance of equipment that services the container shop; and providing direction to technicians to ensure that all repairs/maintenance to equipment (trucks -- diesel and alternate fuel, containers and other heavy duty equipment) are performed in compliance with Company safety and compliance standards, and with all federal and state regulations. The Maintenance Supervisor is responsible for planning and scheduling repair work for the work group to ensure that all work is done in a safe and timely manner, reducing lost productivity. PRINCIPAL RESPONSIBLITIES: • Provide direction to A, B and C level, and lead technicians assigned to work group to ensure that all repair and maintenance work is performed in a safe, efficient and timely manner., • Monitor operational performance and efficiency and take action to redirect activities appropriately., • Report to management on performance; make recommendations for process/programmatic changes for improvement or efficiencies., • Supervise technicians in maintenance shop, including such responsibilities as conducting daily shop huddles; fleet walks; coaching/counseling/ training lead technician and all technician levels on performance/corrective action, when necessary; make hiring/termination decisions in concert with Human Resources and appropriate management; conduct employee training and performance evaluations; evaluate and make recommendations for merit increase, promotion and job changes, as appropriate., • Perform inspections of outside repairs to ensure all work was properly completed in accordance with Company's safety and compliance procedures and federal and state regulations; follow up where appropriate., • Identify training opportunities and, as necessary, document issues and constructively discuss corrective action, as needed, with technician., • Conduct Quality Control Inspections, track issues and resolution to ensure all work is properly completed in accordance with Company's safety and compliance procedures and federal and state regulations., • Oversee repair diagnostics on more complex matters and provide coaching, where necessary; may be required to road test vehicles to determine necessary repairs., • Oversee maintenance shop inventory control system to ensure necessary equipment and parts levels are maintained and purchases are within budget. Review and approve expenses that are within scope of approval level; refer larger expenses or major repairs to manager as appropriate., • Maintain advanced knowledge of engine, emission systems, transmission, brake, hydraulic and electrical systems to perform advanced preventive and repair maintenance functions on heavy equipment and vehicles used by Company, on site and on the road, including: engine chassis repair and maintenance; knowledge of vehicle body control systems, including hydraulics and electrical systems to maintain and repair vehicles in a timely and safe manner; knowledge of heating and air conditioning systems to effectively diagnose and repair complex heating and cooling systems in vehicles in a timely and safe manner; and knowledge of welding tools to fix heavy equipment in a safe and efficient manner to ensure equipment is back in an operable condition as quickly and as safely as possible., • Manage related administrative matters for team, including payroll, maintenance of employee records, records of all preventive and corrective maintenance performed, recording of all information into Dossier Maintenance Software, prepare and submit budget for approval, set departmental goals to align with targets and performance objectives established by division's leadership. QUALIFICATIONS: • High school diploma or G.E.D., • Automotive Service Excellence (ASE) Certification, • T3 Drive., • T4 Brake., • T5 Suspension and Steering., • T6 Electrical/Electronic., • T7 HVAC Systems., • ASE T2 Diesel Engine., • ASE T Master Certified. MINIMUM REQUIREMENTS: • 5 years of experience in maintenance working with heavy equipment., • 1 year of supervisory experience in a lead technician role, supervisor or other management role requiring a thorough knowledge of safe working practices, DOT, OSHA and other federal and state regulations. Requirements: