Construction jobs in Santa Clara, California - Page 15Create job alerts

Job Description About Etched Etched is building the world’s first AI inference system purpose-built for transformers - delivering over 10x higher performance and dramatically lower cost and latency than a B200. With Etched ASICs, you can build products that would be impossible with GPUs, like real-time video generation models and extremely deep & parallel chain-of-thought reasoning agents. Backed by hundreds of millions from top-tier investors and staffed by leading engineers, Etched is redefining the infrastructure layer for the fastest growing industry in history. Job Summary We are looking for a Power Validation Engineer to own the end-to-end power characterization of our ASIC and the mezzanine card platform — from early silicon bring-up through production qualification. You will design measurement methodology, build test benches, and drive findings directly into silicon, package, and system design decisions. Key Responsibilities * Design and execute power measurement campaigns across all voltage rails (VDD_CORE, HBM, PCIe, AUX, etc) under realistic LLM inference and power virus workloads; characterize peak, sustained, and idle power envelopes across PVT corners and define derating curves used in system thermal and PDN specs * Validate power delivery network (PDN) performance — VRM load step response, PCIe power compliance, PDN impedance — and translate measurements into actionable feedback on capacitor placement, plane geometry, and de-cap strategy for PCB and package design teams * Profile power transient events (ramp rates, droop amplitudes, recovery profiles) and correlate them with on-die performance monitor data; build automated power sweep frameworks exercising the full inference workload space across model sizes, batch sizes, sequence lengths, and precision modes * Run extended stress workloads (72 h+ continuous) to surface reliability risks and throttling behavior; instrument multi-zone thermal profiles and support our overseas partners with SLT, production and debugging. * Validate power sequencing, PMBus telemetry accuracy, and BMC alert thresholds across cold-start, hot-restart, and fault-injection scenarios; own power-related pass/fail criteria across FAT, SFT, and RIN qualification stages * Feed characterization data back to RTL and physical design teams as input for DVFS policy, clock gating coverage, and leakage optimization; write precise validation reports that enable silicon and firmware teams to act without re-running experiments * Lead the electrical characterization, validation, and qualification process for the on-board system-level power distribution network, spanning from power converter design to ASIC power integrity validation. * Provide critical support to design engineers through debug, component validation, and failure analysis for released products, independently troubleshooting and determining the root cause of electrical component defects and design flaws. * Develop and implement automated/scripted test procedures for the general qualification and testing of Devices Under Test (DUTs) as part of a comprehensive automation suite. * Collect, analyze, and aggregate test data to support data-driven engineering decisions, generate reports on findings, reduce data sets, and thoroughly investigate test outcomes down to the hardware interface or component level. * Collaborate with hardware designers and diagnostics development teams to understand new project architectures and system components, ensuring the necessary support for testing and debug efforts is implemented. You may be a good fit if you have (Must-have qualifications) * A Bachelor’s degree in Electrical Engineering or a related field. Advanced degrees or certifications in power electronics or related areas are a plus * Deep understanding of ASIC and system-level power delivery — VRM topology, PDN impedance, decoupling strategy, and transient response — with hands-on bench experience using precision shunts, isolated differential probes, and VNA-based PDN impedance measurement * Expertise with multi-phase solutions with high dynamic content and low tolerance. * Experience with VR tuning to a well defined power test plan to ensure VR specifications meet CPU/ ASIC * Demonstrated ability to design experiments that isolate root cause in a complex hardware-software stack, strong oscilloscope and lab instrument fluency (triggering on rare transient events, correlating multi-channel captures), and a track record of finding bugs that only surface under specific workload or environmental conditions * Relevant experience with Silicon bring ups Strong candidates may also have experience with (Nice-to-have qualifications) * Masters Degree in Power Electronics * Experience with high voltage testing (800V and higher) * Prior power validation work on AI accelerators, GPUs, or high-performance server platforms, including HBM power characterization or memory power management interfaces * Experience with OpenBMC, IPMI, or custom BMC firmware for sensor monitoring and power capping; familiarity with LLM inference stacks (vLLM, TensorRT-LLM, or similar) sufficient to construct representative power workloads * Proficiency in Python for test automation, data pipeline construction, and statistical analysis; experience debugging across the stack from PMBus register dumps and BMC sensor logs to firmware traces and Linux kernel power management Benefits * Medical, dental, and vision packages with generous premium coverage * $500 per month credit for waiving medical benefits * Housing subsidy of $2k per month for those living within walking distance of the office * Relocation support for those moving to San Jose (Santana Row) * Various wellness benefits covering fitness, mental health, and more * Daily lunch and dinner in our office How we’re different Etched believes in the Bitter Lesson. We think most of the progress in the AI field has come from using more FLOPs to train and run models, and the best way to get more FLOPs is to build model-specific hardware. Larger and larger training runs encourage companies to consolidate around fewer model architectures, which creates a market for single-model ASICs. We are a fully in-person team in San Jose and Taipei, and greatly value engineering skills. We do not have boundaries between engineering and research, and we expect all of our technical staff to contribute to both as needed.

Job Description Sandis is currently looking for a Design Engineer to join our team in Campbell, CA. Our ideal candidate has experience with civil design, permitting, and applicable software applications including stormwater drainage programs and AutoCAD. Our Projects will include a diverse array of land development site designs. If you are looking for a fast pace and engaging environment, we think you will love it here! Why you will love it here: • The chance to work on iconic Bay Area Projects, • Professional development, training, and mentorship, • Comprehensive benefits package, • Commitment to diversity, equity, and inclusion, • Assist with developing improvement plans including rough/finish grading, stormwater management, and utility plans., • Design of utility systems including water, sanitary, and storm drain., • Assist with fire flow tests., • Interact with other members of a design team including Architects, Landscape Architects, and MEP Engineers., • Engineering support during construction, including review of material submittals, answering Requests for Information (RFIs), site observations among other things., • Conduct engineering assessments., • Prepare technical engineering reports., • Bachelor’s degree in Civil Engineering, • 1+ years of relevant experience, • EIT Certification Preferred, • Familiar with AutoCAD, • Familiarity and understanding of rough and finish grading plans., • Competitive salaries, end-of-year bonuses, and 401k, • Medical, Vision, and Dental insurance including life and long-term disability., • Flexible Spending Account (FSA) for health care, parking and transit, and dependent care expenses, • Starting paid time off at 24 days – 16 PTO and 8 paid Holidays, • 3 days paid bereavement; 10 days paid jury duty., • In-office coffee and snacks, • Education reimbursement and professional license program, Paid annual dues for professional and societal organizations., • Salary increases for attaining P.E. or PLS, • Company-sponsored sports teams and clubs, Sandis Brews, frequent company lunches, and philanthropic activities. Sandis is a professional services corporation specializing in civil engineering (Land Development Design), traffic engineering, land surveying, and planning, but we are much more than the services we offer. Sandis is about reliability, experience, and expertise. For over 55 years, we have been committed to innovation, excellence, leadership, and environmental stewardship. Our job and passion are to provide the foundation for the future to be built upon, always improving the communities where we live, work, and play. We service private and public clients in the high-tech, research and redevelopment, laboratory, corporate, commercial, residential, healthcare, academic, hospitality, civic, justice, and public works sectors. We are a team of experts who care about the people we work with and for. Sandis is an Equal Opportunity Employer.

Job DescriptionEstablished in 2017, WeRide (NASDAQ: WRD) is a leading global commercial-stage company that develops autonomous driving technologies from Level 2 to Level 4. WeRide is the only tech company in the world that holds driverless permits in China, the UAE, Singapore and the US, conducting autonomous driving R&D, tests and operations in over 30 cities of 10 countries around the world. WeRide has operated a self-driving fleet for more than 2,200 days. WeRide.ai Silicon Valley team is looking for Perception engineer to implement the next generation automotive vision and machine learning algorithms. What you will do: • Research and develop efficient, end-to-end ML solutions for Perception with sensor fusion, including but not limited:, • Obstacle detection and understanding (e.g. obstacles’ 3D location, motion properties, and fine-grained attributes), • Understanding of the drivable space and 3D occupancy, • Map sensing (e.g. lane boundary and topology), • Scene understanding (e.g traffic light, short/long-term intent of vehicles, construction zone, etc.), • Develop efficient and robust onboard system, • Develop efficient offboard “loop” to allow fast iteration on long-tail scenariosRequirements:, • Have strong abilities in both algorithms and C++ coding; or have strong expertise in at least one of these fields: computer vision, machine learning, and model optimization, • Solid skills in problem solving, algorithms, and data analysis, • Good communication and coordination skills, • Self-motivated and believe in the future of self-driving-carsPlus:, • Rich experience in C++ development, multithreading, memory management, computing optimization, • Rich experience in multi-sensor fusion and 3d/2d tracking

Job Description Crusoe is on a mission to accelerate the abundance of energy and intelligence. As the only vertically integrated AI infrastructure company built from the ground up, we own and operate each layer of the stack — from electrons to tokens — to power the world's most ambitious AI workloads. When you join Crusoe, you join a team that is building the future, faster. We're in the midst of the greatest industrial revolution of our time. The demand for AI compute is boundless, and power is a bottleneck. We're solving that — with an energy-first approach that makes AI infrastructure better for the world and faster for the people innovating with AI. We're looking for problem-solving, opportunity-finding teammates with a sense of urgency, who believe in the scale of our ambition and thrive on a path not fully paved — people who want to grow their careers alongside a team of experts across energy, manufacturing, data center construction, and cloud services. If you want to do the most meaningful work of your career, help our customers and partners advance their AI strategies, and be part of a high-performing team that believes in each other, come build with us at Crusoe. About This Role: The Principal Software Engineer for the Model LifeCycle team will play a crucial role in building a comprehensive managed platform for the entire application development lifecycle, with a specific focus on leveraging Machine Learning models, including Large Language Models (LLMs). What You’ll Be Working On: * Manage fine-tuning systems for large foundation models (SFT, PEFT, LoRA, adapters), including multi-node orchestration, checkpointing, failure recovery, and cost-efficient scaling. * Implement and maintain end-to-end training pipelines for Large Language Models. * RFT and Reinforcement learning to the fine tuning and training sections * Distillation and reinforcement learning pipelines (e.g., preference optimization, policy optimization, reward modeling). * Dataset, model, and experiment management: versioning, lineage, evaluation, and reproducible fine-tuning at scale. What You’ll Bring to the Team: * Advanced degree in Computer Science, Engineering, or a related field. * 4-5+ years of industry experience leading and driving impactful projects in the AI Space * Experience in Generative AI (Large Language Models, Multimodal). * Hands-on experience training, fine-tuning, and aligning LLMs using Reinforcement Learning and Reinforcement Fine-Tuning (RFT) techniques. * Proactive and collaborative approach with the ability to work autonomously * Passion for building cutting-edge AI products and solving challenging technical problems. Bonus Points: * Proficiency in Golang or Python for large-scale, production-level services and PyTorch * Contributions to open-source AI projects such as vLLM or similar frameworks. * Performance optimizations on GPU systems and inference frameworks. Benefits: * Competitive compensation * Restricted Stock Units * Paid time off & paid holidays * Comprehensive health, dental & vision insurance * Employer contributions to HSA account * Paid parental leave * Paid life insurance, short-term and long-term disability * Professional development & tuition reimbursement * Mental health & wellness support * Commuter benefits (parking & transit) * Cell phone stipend * 401(k) Retirement plan with company match up to 4% of salary * Volunteer time off Compensation Range Compensation will be paid in the range of up to $172,425 - $230,945 + Bonus. Restricted Stock Units are included in all offers. Compensation to be determined by the applicants knowledge, education, and abilities, as well as internal equity and alignment with market data. Crusoe is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

Job Description Antora builds and deploys thermal energy storage to power always-on industrial operations and data centers with low-cost energy. Factory-built in California, Antora's thermal batteries deliver reliable and cost-effective heat and power for industrial loads of any size. Antora is electrifying global industry while supporting U.S. manufacturing jobs, lowering costs for energy consumers, and enhancing the competitiveness of American industry. We are growing our company with people who put team and mission first, value connection through laughter and joy, and build with humility and openness. We are committed to continue building a diverse, passionate, and creative team dedicated to a future where every industrial facility, everywhere on earth, is powered by abundant, clean, low-cost energy. About The Role Antora is seeking an exceptionally driven Electrical Engineering Manager / Architect to lead the team designing the next generation of Antora's thermal energy storage products. This role combines people leadership with deep technical ownership of high-voltage, high-power electrical system architecture spanning both product and plant-level systems. You will guide a team of engineers through the full product lifecycle, from architecture definition and trade studies through detailed design, prototyping, validation, manufacturing, and field deployment. Your work will directly shape the commercialization of a first-of-a-kind long-duration energy storage technology. This is a highly cross-functional, hands-on leadership role for someone who thrives in first-principles engineering, moves comfortably between whiteboard strategy and hardware reality, and knows how to build teams, systems, and processes that scale. You'll also help the organization apply modern engineering tools, including simulation, automation, and AI-enabled workflows where useful - to move faster, make better decisions, and keep the bar high for technical rigor. What You'll Do • Lead and grow the team: Hire, mentor, and manage a high-performing electrical engineering team, providing technical direction, design reviews, and coaching to support strong execution and long-term team development., • Own system architecture: Define and drive the electrical architecture for both Antora's thermal battery modules and plant-level electrical systems., • Drive hardware development: Lead development of high-power, high-current electrical heating and power systems from early concept through detailed design, validation, site deployment, and operational support., • Advance R&D and innovation: Evaluate power delivery approaches, including AC and DC system architectures, to optimize for performance, efficiency, reliability, manufacturability, and cost., • Partner cross-functionally: Work closely with mechanical, reliability, software, procurement, manufacturing, and project execution teams to ensure cohesive system development and successful program delivery., • Ensure compliance and quality: Oversee electrical code compliance and standards alignment, including UL and NEC requirements, while maintaining a high bar for safety, reliability, and regulatory readiness., • Build engineering systems: Establish and reinforce strong engineering practices, documentation standards, simulation and review workflows, and effective development processes that improve team efficiency and design quality., • Shape how we work: Help the team thoughtfully incorporate modern tools, including AI-assisted analysis, documentation, and engineering workflows, in ways that accelerate execution without compromising judgment or rigor.What We're Looking For, • Bachelor's or Master's degree in Electrical Engineering or a related field, • 10+ years of relevant experience, including a strong track record leading electrical engineering teams responsible for grid-scale or industrial power systems, • Deep first-principles engineering mindset, with a relentless drive to increase performance and reduce cost, • Extensive experience with high-power systems at the MW scale across low- to medium-voltage ranges, from 208V through 34.5kV+, • Strong system architecture experience, including substation design, transformer sizing, bus and breaker sizing, and preparation of single-line diagrams, • Significant experience with power electronics and switching-based power delivery systems at 100kW+, • Proven ability to manage equipment vendors and EPC partners, with practical familiarity in field construction, commissioning, and site integration, • Familiarity with electrical design and simulation tools such as MATLAB, Simulink, PSpice, PSCAD, or similar tools, • Experience testing, qualifying, troubleshooting, and performing root-cause analysis for high-power electrical systems, • Excellent written and verbal communication skills, with the ability to clearly explain complex technical concepts across disciplines and levels of the organizationBonus Qualifications, • Experience with renewable energy systems such as solar or wind, or with industrial process heating applications such as green hydrogen, • Experience drafting and reviewing HAZOP, PHA, and LOTO procedures, • Participation in full lifecycle product development, from early R&D through commercial launch and field operations, • Experience using data, automation, or AI-enabled tools to improve engineering throughput, technical decision-making, or design quality in hardware development environments Work Location: Onsite in San Jose, CA Salary Range: $196,000 USD - $235,000 USD Salary Basis: Annual Please note that the salary range listed above reflects Antora Energy's estimated pay for this position. The actual salary offered will be within the posted range and determined based on several factors including but not limited to a candidate's experiences, credentials and expertise, as they pertain to the position's requirements. In addition to a competitive base salary, Antora Energy's Total Rewards program includes equity compensation in the form of stock options, a premium health benefits package with life and disability insurance, a 401K plan with employer contributions, flexible spending accounts, and an industry leading paid-time-off policy that features flexible and inclusive holiday observance, as well as paid volunteer time off. When it comes to stopping climate change, we need everyone. We believe that having a diversity of backgrounds and experiences strengthens all of us, and we strive to create an environment where every one of us is empowered to create meaningful change.

Job Description Whether you're a recent grad or a seasoned professional, you can experience meaningful career growth at Rosendin. Enjoy a true sense of ownership as you work with a proven industry leader on some of the most exciting and high-profile projects in the nation. We offer a wide range of job opportunities, competitive compensation, full benefits, an Employee Stock Ownership Plan and more. Why Rosendin? Committed. Innovative. Engaged. If you're looking to take your career to the next level and work with some of the best and brightest in the industry, we want to hear from you. Since our founding over 100+ years ago, Rosendin has been driven to positively impact the communities where we live and work. We are an organization built on integrity and we have a culture that empowers people, embraces diversity, and inspires everyone to do their best. As one of the largest EMPLOYEE-OWNED electrical contractors in the United States, you will have the unique benefit of being a shareholder at a company that is experiencing tremendous growth and success. When our people succeed and fuel our success, we reward them. We'd love to have you as a shareholder! Your Next Opportunity The Category Manager is responsible for developing and executing procurement category strategies for Lighting Fixtures, Lighting Control Systems, and Emergency Lighting Inverter Systems. This role ensures alignment with project specifications, cost objectives, quality standards, constructability requirements, and project schedules. The position focuses on achieving best value while improving efficiency throughout the procurement lifecycle-from estimating and bid support through contract execution and project closeout. The Category Manager will leverage industry expertise to optimize supplier relationships, reduce risk, and drive continuous improvement across procurement processes. As a subject matter expert in the lighting industry, this role serves as a trusted advisor to estimating, procurement, and project teams by providing technical guidance, market insight, and strategic support. What You'll Do Category Strategy & Market Intelligence * Develop and implement category management strategies for Lighting Fixtures, Lighting Control Systems, and Emergency Lighting Inverter Systems to achieve financial value and improve Total Cost of Ownership (TCO). * Lead cross-functional teams in evaluating category spend, supplier landscape, and market conditions to identify consolidation and strategic sourcing opportunities. * Monitor global supply markets including pricing trends, supplier capacity, emerging technologies, and industry developments. * Communicate relevant market insights and supply chain risks to internal stakeholders and adjust strategies accordingly. * Proactively challenge existing procurement, estimating, and cost tracking practices to improve operational performance and financial outcomes. Strategic Sourcing & Contracting * Develop sourcing strategies, RFPs, and bid packages that align with company objectives and project requirements. * Lead negotiations with strategic suppliers to secure favorable commercial and technical terms. * Develop regional and national contracts that deliver optimal commercial value while minimizing supply chain risk. * Negotiate and review NDAs, contracts, and supplier agreements in collaboration with internal stakeholders and legal teams. Supplier Relationship Management * Establish and maintain strong relationships with key suppliers and manufacturers to drive long-term value and collaboration. * Implement supplier performance management programs including KPIs, scorecards, and regular business reviews. * Lead national business reviews with strategic suppliers to ensure compliance with contractual obligations and performance expectations. * Identify performance gaps, conduct root cause analysis, and drive corrective action plans with suppliers and internal stakeholders. Project & Estimating Support * Support estimating and project teams with procurement strategies, pricing insight, and supplier engagement for lighting-related scopes. * Review project documentation, plans, specifications, and estimating takeoffs related to lighting systems to ensure scope accuracy prior to supplier solicitation. * Perform technical and commercial evaluation of supplier proposals to ensure best value and risk mitigation. * Identify specified manufacturers and determine the most effective procurement strategy to maximize competitiveness and probability of project award. Process Improvement & Organizational Support * Assess current procurement processes and identify opportunities for improvement, standardization, or technology adoption. * Develop implementation plans for category strategies and coordinate execution with stakeholders across the organization. * Lead change management initiatives supporting procurement transformation and organizational growth. * Build strong internal and external networks to support knowledge sharing, collaboration, and innovation. What You'll Need To Be Successful * Bachelor's degree in Business, Finance, Supply Chain Management, Operations, or a related field. * Minimum 7 years of procurement experience within the electrical construction industry. * Equivalent combinations of education, training, and relevant industry experience will also be considered. * Certified Purchasing Manager (CPM), Certified Professional in Supply Management (CPSM), or equivalent procurement certification preferred. What You Bring To Us * Bachelor's Degree in Business, Finance, Supply Management, Operations or related field, or an equivalent combination of education, training, and experience. * Certified Purchasing Manager (CPM) Certification or Certified Professional in Supply Chain Management (CPSM) Certification preferred. * Strong knowledge of the electrical construction industry, particularly lighting fixtures, lighting control systems, and emergency lighting inverter systems. * Demonstrated experience developing procurement strategies, sourcing plans, and negotiation strategies. * Experience performing market analysis including supplier landscape evaluation, pricing trends, and supply risk assessment. * Proven experience negotiating supplier contracts and commercial agreements. * Ability to lead cross-functional teams and collaborate effectively across procurement, estimating, and project operations. * Strong analytical, problem-solving, and critical thinking skills. * Demonstrated experience developing project plans including scope, cost estimates, schedule milestones, and risk mitigation strategies. * Ability to read and interpret construction drawings, project plans, and specifications. * Excellent interpersonal, written, and verbal communication skills. * Proficiency with Microsoft Office Suite including Outlook, Word, Excel, and PowerPoint, as well as Bluebeam and Adobe tools. * Self-motivated with strong initiative and the ability to communicate complex ideas and processes clearly. Travel General work environment - sitting for long periods, standing, walking, typing, carrying, pushing, bending. Work is conducted primarily indoors with varying environmental conditions such as fluorescent lighting and air conditioning * Noise level is usually low to medium; it can be loud on the jobsite. * We fully comply with the ADA and applicable state law, including considering reasonable accommodation measures that may enable qualified disabled applicants and employees to perform essential functions. * Occasional lifting of up to 30 lbs. Rosendin is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, pregnancy, age (over 40), or any other categories protected by applicable federal, state, or local law. YOU Matter - Our Benefits * ESOP - Employee Stock Ownership * 401k * Annual bonus program based upon performance, profitability, and achievement * 17 PTO days per year plus 10 paid holidays * Medical, Dental, Vision Insurance * Term Life, AD&D Insurance, and Voluntary Life Insurance * Disability Income Protection Insurance * Pre-tax Flexible Spending Plans (Health and Dependent Care) * Charitable Giving Match with our Rosendin Foundation Pay Range $136,900.00-$179,700.00 Annual The pay range for this role is what we expect to pay for candidates that meet the specified qualifications and requirements listed on this job description. Candidate's pay can vary based on location, job-related experience, skills, and education. Our success is rooted in our people. We all come together around long-term vision and a sense of shared ownership. As a group, we do whatever it takes to ensure the success of our business and your career. Rosendin Electric is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job Description Sandis is currently looking for a Project Engineer to join our team in Campbell, CA. Our ideal candidate has strong technical abilities, experience in land development project design, and the ability to assist in leading a team of engineers on exciting projects throughout California. We think you will love it here! Why you will love it here: • The chance to work on iconic Bay Area Projects, • Professional development, training, and mentorship, • Comprehensive benefits package, • Commitment to diversity, equity, and inclusion, • Evaluate, select, and apply standard engineering techniques, procedures, and criteria to solve engineering challenges and create construction documents, • Understand project design and development for grading, stormwater treatment, and utility systems from the planning phase through construction., • Preparation of specifications, research investigations, reports., • Plan, schedule, and coordinate detailed phases of technical work in portions of a major project or in a total project of moderate scope across multiple projects., • Coordinate with the design team, consultants, and authorities having jurisdiction., • Track and monitor approvals from agencies, Additional Service Requests, and contract approvals., • Ability to adjust site plans to meet requirements and provides recommendations for more effective layouts., • Reviews the entire project, including design done by others, before QA/QC review., • Bachelor's Degree in Civil Engineering, • 4+ years’ experience in project design (Land Development Design), • Professional Engineers license, or EIT, and actively working towards obtaining PE, • Proficiency in AutoCAD Civil 3D, hydrology modeling programs, and storm drainage programs., • Excellent understanding of precise grading, utility plans and stormwater management., • Ability to problem-solve grading aspects and balance earthwork when needed, • Competitive salaries, end-of-year bonuses, and 401k, • Medical, Vision, and Dental insurance, including life and long-term disability, • Flexible Spending Account (FSA) for health care, parking and transit, and dependent care expenses, • 24 days of paid time off starting at 16 days PTO, 8 paid Holidays, • 3 days paid bereavement; 10 days paid jury duty, • In-office coffee and snacks, • Education reimbursement and professional license program, Paid annual dues for professional and societal organizations, • Salary increases for attaining P.E. or PLS, • Company-sponsored sports teams and clubs, Sandis Brews, frequent company lunches, and philanthropic activities. Sandis is a professional services corporation specializing in civil engineering (Land Development Design), traffic engineering, land surveying, and planning, but we are much more than the services we offer. Sandis is about reliability, experience, and expertise. For over 55 years, we have been committed to innovation, excellence, leadership, and environmental stewardship. Our job and passion are to provide the foundation for the future to be built upon, always improving the communities where we live, work, and play. We service private and public clients in the high-tech, research and redevelopment, laboratory, corporate, commercial, residential, healthcare, academic, hospitality, civic, justice, and public works sectors. We are a team of experts who care about the people we work with and for. Sandis is an Equal Opportunity Employer.

Job DescriptionSalary: $70,000 $80,000 AboutKnightscope Knightscope is a security technology company building the Nations First Autonomous Security Force. The Company combines autonomous machines, advanced software, and human expertise to help protect people, property, and critical infrastructure. Knightscopes long-term mission is to make the United States of America the safest country in the world Location Requirement:Full-time, on-site at Sunnyvale HQ Job Summary Knightscope is hiring a Content Creator to produce fresh, on-brand content that advances Knightscopes brand and the nations first Autonomous Security Force (ASF) narrative across every major digital channel. Reporting to the Senior Creative Director, this role owns day-to-day content production for LinkedIn, X, Instagram, Facebook, YouTube, and TikTok. This role will also establish a live streaming presence on Twitch and other emerging platforms. The Content Creator will play a visible role in repositioning Knightscope from a robotics company to a premium Managed Security Services Provider, supporting the companys marketing priorities including a new Podcast Studio One, website overhaul, and flagship industry events. About the Role This is a hands-on, multi-disciplinary role for a digital storyteller who thrives on the full content lifecycle from concept and script to shoot, edit, publish, and analyze. You will be the creative engine behind the ASF brand story: writing sharp social copy, cutting short-form vertical video for TikTok and Reels, producing long-form content for YouTube and the forthcoming audio/video Podcast Studio One, and operating live streams from Knightscope HQ and from the road. You will work shoulder-to-shoulder with the Senior Creative Director and cross-functionally with the executive, sales, and investor relations teams to translate Knightscopes mission into content that resonates with enterprise security buyers, industry operators, investors, and the broader public. Travel is a core part of this role: expect 610 trips per year, in-state and out-of-state, to trade shows, client events, and investor-facing engagements, all expenses paid. This role is fully on-site at Knightscope HQ in Sunnyvale, CA, with a minimum 40-hour work week. Key Responsibilities • Plan, produce, and publish daily content across LinkedIn, X, Instagram, Facebook, and TikTok, ensuring every post reflects the Autonomous Security Force messaging framework and brand standards., • Shoot and edit short-form vertical video (TikTok, Reels, Shorts) and long-form video (YouTube) featuring Knightscope technology, teammates, clients, and events., • Produce, host, and/or operate live streams on Twitch, YouTube Live, LinkedIn Live, and other platforms, including setup of scenes, overlays, audio, and multi-platform simulcasting., • Support Podcast Studio One operations, including pre-production, in-studio capture, editing, episode publishing, and multi-channel promotion., • Travel 610 times per year to trade shows (including GSX), client sites, investor events, and marketing activations to capture and produce on-site content under tight turnaround windows., • Write on-brand social copy, video scripts, captions, titles, thumbnails, and descriptions that apply Knightscopes voice, terminology, and Say This / Not That messaging standards., • Maintain a rolling content calendar, coordinate review and approval cycles, and ensure on-time delivery tied to the 2026 Campaign Timeline and earnings-related events., • Monitor performance across platforms using native analytics including HubSpot, report on engagement, growth, and content-attributed traffic, and translate insights into continuous improvement., • Monitor comments, mentions, and DMs across channels, engage the community in Knightscopes voice, and escalate customer, investor, or press inquiries to the appropriate team., • Track emerging platforms, formats, and creator tools, piloting new approaches that keep Knightscopes content ahead of the curve in a fast-moving digital landscape., • Adhere to disclosure, confidentiality, and communications guidelines appropriate for a publicly traded company, coordinating closely with the Senior Creative Director and CEO on sensitive content. Required Qualifications • 24 years of hands-on content creation experience in an agency, in-house brand, creator-economy, or comparable role, with a portfolio of published work and demonstrated account or channel growth., • Platform-native fluency across LinkedIn, X, Instagram, Facebook, YouTube, and TikTok, including an understanding of algorithmic behavior, post formats, and audience dynamics unique to each channel., • End-to-end video production skills, including shooting with mirrorless cameras, basic lighting and audio capture, and professional editing in Adobe Premiere Pro, DaVinci Resolve, or Final Cut Pro., • Proficiency with short-form vertical editing tools such as CapCut, and working knowledge of motion-graphics basics in Adobe After Effects or Premiere-native templates., • Hands-on live-streaming experience with OBS Studio, Streamlabs, or similar, including scene construction, audio routing, overlays, and multi-platform simulcasting via tools such as Restream or StreamYard., • Working proficiency with Adobe Photoshop and Illustrator, and with production-grade template tools such as Canva Pro or Figma for volume asset creation., • Strong copywriting and scriptwriting skills, with demonstrated ability to adopt and sustain a specific brand voice across posts, videos, and long-form content., • Experience with native platform analytics, Google Analytics 4, UTM tracking, and a social-management platform such as Sprout Social, Hootsuite, Later, or Buffer., • Comfort working with AI content tools (ChatGPT, Claude, Midjourney, Descript, ElevenLabs, or equivalents) to accelerate drafting, editing, and ideation while maintaining editorial quality., • Excellent project-management and organizational skills, with the ability to juggle multiple concurrent productions, meet deadlines, and hit publish cadence under pressure., • Willingness and availability to travel 610 times per year, in-state and out-of-state, and to work a minimum 40-hour week on-site at Knightscope HQ in Sunnyvale, CA., • Ability to pass a standard background check, consistent with Knightscopes operating environment as a security technology company. Compensation & Benefits • Base Salary:$70,000 $80,000 (DOE), • Equity:Stock options, • Benefits:Medical, dental, vision, 401(k), paid time off, • Location Requirement:Full-time, on-site at Sunnyvale HQ

Job Description Crusoe is on a mission to accelerate the abundance of energy and intelligence. As the only vertically integrated AI infrastructure company built from the ground up, we own and operate each layer of the stack — from electrons to tokens — to power the world's most ambitious AI workloads. When you join Crusoe, you join a team that is building the future, faster. We're in the midst of the greatest industrial revolution of our time. The demand for AI compute is boundless, and power is a bottleneck. We're solving that — with an energy-first approach that makes AI infrastructure better for the world and faster for the people innovating with AI. We're looking for problem-solving, opportunity-finding teammates with a sense of urgency, who believe in the scale of our ambition and thrive on a path not fully paved — people who want to grow their careers alongside a team of experts across energy, manufacturing, data center construction, and cloud services. If you want to do the most meaningful work of your career, help our customers and partners advance their AI strategies, and be part of a high-performing team that believes in each other, come build with us at Crusoe. About This Role: The Principal Software Engineer for the Model LifeCycle team will play a crucial role in building a comprehensive managed platform for the entire application development lifecycle, with a specific focus on leveraging Machine Learning models, including Large Language Models (LLMs). What You’ll Be Working On: * Manage fine-tuning systems for large foundation models (SFT, PEFT, LoRA, adapters), including multi-node orchestration, checkpointing, failure recovery, and cost-efficient scaling. * Implement and maintain end-to-end training pipelines for Large Language Models. * RFT and Reinforcement learning to the fine tuning and training sections * Distillation and reinforcement learning pipelines (e.g., preference optimization, policy optimization, reward modeling). * Dataset, model, and experiment management: versioning, lineage, evaluation, and reproducible fine-tuning at scale. What You’ll Bring to the Team: * Advanced degree in Computer Science, Engineering, or a related field. * 8+ years of industry experience leading and driving impactful projects in the AI Space * Experience in Generative AI (Large Language Models, Multimodal). * Hands-on experience training, fine-tuning, and aligning LLMs using Reinforcement Learning and Reinforcement Fine-Tuning (RFT) techniques. * Proactive and collaborative approach with the ability to work autonomously. * Passion for building cutting-edge AI products and solving challenging technical problems. Bonus Points: * Proficiency in Golang or Python for large-scale, production-level services and PyTorch. * Contributions to open-source AI projects such as vLLM or similar frameworks. * Performance optimizations on GPU systems and inference frameworks. Benefits: * Competitive compensation * Restricted Stock Units * Paid time off & paid holidays * Comprehensive health, dental & vision insurance * Employer contributions to HSA account * Paid parental leave * Paid life insurance, short-term and long-term disability * Professional development & tuition reimbursement * Mental health & wellness support * Commuter benefits (parking & transit) * Cell phone stipend * 401(k) Retirement plan with company match up to 4% of salary * Volunteer time off Compensation Range Compensation will be paid in the range of up to $208,725 - $279,565 + Bonus. Restricted Stock Units are included in all offers. Compensation to be determined by the applicants knowledge, education, and abilities, as well as internal equity and alignment with market data. Crusoe is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

Job Description Overview Job Title: Safety and Health Professional II Location: Moffett Field, CA Job Family Code: J – Security & Safety Administration Function/Branch: NFAC Directorate: Mission Execution Position Type: Regular Full-time Pay Type: Exempt Grade: A08 (JC0809) – A09 (JC0911) Salary Range: $94,000 - $165,000 / year Overview Beyond New Horizons, LLC (BNH) has an exciting opportunity for a safety, health and environmental (SHE) professional, supporting TOS II, at NASA Ames Research Center, Moffett Field, CA. The SHE professional will be working as a member of an integrated team responsible for supporting the United States Air Force Test Operations and Sustainment efforts at the National Full-scale Aerodynamics Complex (NFAC). The NFAC provides the United States with the capability of performing ground‐based aerodynamic and acoustic experiments at speeds from static to nearly 350 mph on large‐scale and full‐scale aerospace vehicles and components. This complex includes a 40‐ by 80‐foot wind tunnel and an 80‐ by 120‐foot wind tunnel. **If you are seeing this posting on a job board, BNH highly recommends you apply directly on the Careers Center page of our business website (). Job board applications are not always compatible with company applicant tracking systems. ** Job Summary The successful candidate will lead workplace safety, health and environmental programs to maintain and promote a healthy and safe environment for staff, subcontractors and visitors. Lead the development, implementation and maintenance of safety policies and procedures, and provide education and/or training to help staff understand and comply with the requirements of workplace safety policies. Inspect and survey areas and activities throughout the facility to minimize potential risks. Responsibilities Specific duties include but are not limited to: • Provide safety and industrial hygiene support service to the NFAC team, interact with management, participate in planning meetings, review and approve appropriate documents, work plans, etc. to ensure safety is adequately addressed, • Develop and approve job/work hazard analyses for defined work, • Develop/provide training and education on health and safety policies and procedures, • Participate/lead incident investigations, including development of required reports, • Manage the facility's hazardous waste program, including collection, storage, and arranging for transportation and disposal, • Develop/maintain the facility's emergency response plan and coordinate implementation, • Manage facility physical security, maintain hardware and software database for internal badge access system. Respond to onsite alarm notifications and work with local base protective services., • Perform and sign-off inspections of incoming quality noted materials., • It is a condition of employment to wear PPE (Personal Protective Equipment) in accordance with supervisory direction and company policy, • Perform other duties as required Basic Qualifications: • Bachelor of Science degree in a specialized scientific field (e.g., safety, industrial hygiene, system safety, engineering, process/mechanical engineering. In lieu of a degree, at least 6 years of related experience., • Must be able to obtain and maintain a security clearance, • Current U. S. Citizenship required Preferred Qualifications • Professional certification such as PE, CSP, CIH, • Working knowledge of California OSHA and Workers Compensation Regulations, • Train the Trainer certifications (MEWP, NFPA 70e, etc)Active secret clearance, • Excellent oral and written communication skills, • Specialized knowledge of and successfully demonstrated experience related to:, • System safety, • A safety specialty (e.g., Personal Protective Equipment, lockout/tagout, fall protection, confined space, chemical & hazardous waste management, excavation, hot work permits) or engineering (e.g., civil, process safety, mechanical) or related disciplines., • Industrial hygiene requirements and practices, • Safety management, monitoring programs, principles, and methodologies., • Safety and health laws and regulations and applicable agencies’ permitting processes and responsibilities., • Engineering, construction, and subcontract work processes., • Knowledgeable in USAF explosive safety., • Skilled in oral and written communication and knowledge of computer applications. Qualifications What We Offer • Competitive salaries, • Continuing education assistance, • Multiple healthcare benefits packages, • 401K with employer matching, • Paid time off (PTO) along with a federally recognized holiday schedule

Job DescriptionCoreWeave is The Essential Cloud for AI™. Built for pioneers by pioneers, CoreWeave delivers a platform of technology, tools, and teams that enables innovators to build and scale AI with confidence. Trusted by leading AI labs, startups, and global enterprises, CoreWeave combines superior infrastructure performance with deep technical expertise to accelerate breakthroughs and turn compute into capability. Founded in 2017, CoreWeave became a publicly traded company (Nasdaq: CRWV) in March 2025. Learn more at You'll Do: CoreWeave is the AI Hyperscaler™, delivering a cloud platform of cutting-edge services powering the next wave of AI. Our technology supports enterprises and leading AI labs with resilient, efficient, and high-performance solutions for accelerated computing. With a rapidly expanding global data center footprint, CoreWeave is consistently recognized for innovation and industry leadership. As the Global Logistics Data Center Operations Lead – (Americas or EMEA), you will: • Lead end-to-end data center logistics operations for your region, spanning ramp and sustaining sites: dock-to-cage, storerooms, in-hall material flows, spares, and RMAs., • Coordinate and develop Inventory Control Specialists (ICS) / Logistics Technicians, Regional Managers, and all DC logistics IC team members within your region., • Translate build and M&O plans into DC logistics capacity, coverage, and staffing (by site and by mode: ramp vs sustain)., • Own DC storeroom performance: inventory accuracy, pick accuracy, dock-to-stock, order-to-"ready for install", chain-of-custody, and audit readiness., • Standardize and enforce SOPs, playbooks, and visual management for data center logistics across your region, aligned to global GLO standards., • Partner closely with the Global Logistics Warehouse & FSL Operations Lead to ensure frictionless handoffs from warehouses/FSLs into DC logistics (crate handling, documentation, timing, and proof of delivery)., • Drive 3PL/4PL and white-glove performance at the DC interface (dock-to-cage, JIT deliveries, crate handling, returns) for your region., • Lead regional cadence reviews with DC Ops, GLO, Security, and other stakeholders; publish KPI packs; own RCA/CAPA to closure for DC logistics issues., • Act as the primary DC logistics point of contact for your region with Data Center Operations leadership, aligning site-level needs with global logistics capabilities. In this role, you will own all in-data-center logistics functions in your region, including: • ICS / Logistics Technicians and their managers (regional and site level)., • Storeroom operations (receiving, tagging, binning, cycle counts, replenishment)., • Data hall support logistics (kitting, pre-stage, JIT deliveries, crate handling, returns)., • The Global Logistics Warehouse & FSL Operations Lead, who owns the upstream warehouse/FSL network, WMS, and lease portfolio., • Data Center Operations, who own construction and run operations in the halls., • Bachelor's degree in Supply Chain, Logistics, Operations Management, Industrial Engineering, Business, or a related field (or equivalent experience)., • 8+ years in data center logistics, warehouse/DC operations, or high-value hardware logistics, with at least 3–5 years leading multi-site teams., • Proven experience managing or leading ICS / logistics technicians / storeroom or DC logistics teams across multiple sites or a region., • Strong background in inventory control and serialized asset management (cycle counts, reconciliations, variance analysis, SOX/audit readiness)., • Experience orchestrating ramp (build) and sustaining logistics modes at data centers or similarly complex environments., • Comfortable working with and improving WMS, ERP, and asset/CMDB tools; strong spreadsheet/BI skills., • Demonstrated ability to standardize SOPs and playbooks, stand up new sites, and drive behavioral adoption across teams., • Excellent cross-functional communicator, able to work with DC operations, engineering, security, finance, procurement, and vendors., • Willingness and ability to travel regionally (e.g., 25–40% depending on footprint and phase).Preferred:, • Experience in AI, cloud infrastructure, or hyperscaler data center environments., • Experience partnering with 3PL/4PL providers, white-glove carriers, and regional warehouse networks., • Familiarity with 5S/lean, continuous improvement, and structured RCA/CAPA., • Ensure materials, spares, and RMAs flow cleanly into and out of data centers., • Tie day-to-day dock and storeroom work to measurable service outcomes for build and operations. At CoreWeave, we work hard, have fun, and move fast! We're in an exciting stage of hyper-growth that you will not want to miss out on. We're not afraid of a little chaos, and we're constantly learning. Our team cares deeply about how we build our product and how we work together, which is represented through our core values: • Be Curious at Your Core, • Act Like an Owner, • Empower Employees, • Deliver Best-in-Class Client Experiences The base salary range for this role is $161,000 to $237,000. The starting salary will be determined based on job-related knowledge, skills, experience, and market location. We strive for both market alignment and internal equity when determining compensation. In addition to base salary, our total rewards package includes a discretionary bonus, equity awards, and a comprehensive benefits program (all based on eligibility). What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs, including: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment While we prioritize a hybrid work environment, remote work may be considered for candidates located more than 30 miles from an office, based on role requirements for specialized skill sets. New hires will be invited to attend onboarding at one of our hubs within their first month. Teams also gather quarterly to support collaboration. California Consumer Privacy Act - California applicants only CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: . Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job Description Senior Professional Accountant - Expert in Sage 100 Contractor (Campbell) Pathway to Controller / Partnership We are a Construction Company seeking a high-performing accounting professional who is ready for more than just a job — this is a career-defining opportunity with a clear pathway to Controller-level leadership and potential Partnership within our growing organization. This role is designed for an ambitious, self-motivated professional with an exceptional work ethic and a commitment to producing outstanding results. If you are solutions-driven, thrive under responsibility, and consistently deliver excellent work, you will have the opportunity to grow into senior financial leadership. What You’ll Do: * Manage full-cycle accounting using Sage 100 Contractor * Oversee financial reporting, job costing, and reconciliations * Ensure integrity of AP/AR and general ledger * Strengthen internal controls and improve financial processes * Provide financial insights that guide executive decision-making * Contribute strategically to company growth initiatives Who You Are: * Construction accounting experience * Highly self-motivated with a strong sense of ownership * Known for an impressive work ethic and professional discipline * Solutions-oriented and proactive in resolving challenges * Detail-focused with a track record of producing excellent work * A collaborative team player who elevates those around them * Ambitious and ready to grow into senior leadership The Opportunity: This position is structured for advancement. Exceptional performance, leadership ability, and strategic contribution can lead to promotion into a Controller role and, for the right individual, equity partnership in the company. We are looking for someone who sees beyond daily tasks — someone who wants to build, lead, and grow with us long term. If you are ready to step into a role with real upside and meaningful impact, we invite you to apply. Qualifications: • Expert in Sage 100 Contractor software, • Minimum AA Degree, BA Degree a plus, • Minimum of 3.7 GPA, • Interested in office work in a fast-paced growing company, • Minimum one year of sales or customer service experience, • Familiar with Microsoft Windows, Word, Outlook and MUST be proficient using MS Excel, • Must demonstrate SUPERIOR MULTITASK capabilities, • Mature, responsible, self-starter and quick learner, • EXCELLENT communication skills both verbal and written, • Must have a RELIABLE car and GOOD driving record, • Ideally live in or NEAR Campbell Hours: F/T-Monday through Friday from 8:00-5:00. Candidates MUST include a resume, cover letter and availability for consideration Company DescriptionWe are an upcoming Construction / Consulting Firm located in the heart of Silicon Valley. We have 35+ years experience in the construction industry and are partnering with major players in our industry.We are an upcoming Construction / Consulting Firm located in the heart of Silicon Valley. We have 35+ years experience in the construction industry and are partnering with major players in our industry.

Job DescriptionDescription: Overview The Project Engineer assists the Project Managers with all tasks related to construction projects. This includes sales takeoffs, ordering parts, attending meetings, field coordination, processing POs, job cost tracking and other project related tasks. The PE must fully understand the construction process and how a project comes together to ensure a smooth installation process. The Project Engineer will work closely with project managers, field personnel, design engineers and program engineers to ensure the success of the project. The Company ASG strives to be the trusted partner to our customers, to adopt proven technologies and to enhance the lives of our team members. Our team members are passionate about smart building technologies, with the goal of promoting healthy & environmentally friendly buildings through the provision of complete and reliable building management systems. We install such control systems on new construction and retrofit projects, including large commercial research and development office campuses, data centers, bioscience, semiconductor clean rooms, and government laboratory campuses. ASG has a reputation for exceeding customer expectations and consistent execution. Our team members continue this tradition through their passion, integrity and desire to improve. Job Responsibilities The following list captures the general responsibilities; however, each project has different specifications, goals, environmental conditions, and financial considerations. • Perform sales takeoffs and initial project estimates which are reviewed by the sales team., • Prepare and process project startup paperwork and internal adjustments., • Review project plans and scope with the Project Manager to determine and understand project objectives., • Oversee field coordination to ensure project schedule is met., • Attend project meetings and coordinate project design / submittals through approval process., • Review project material list and prepare ordering requests., • Manage and track project costs to ensure project is on budget, with the help of the Project Manager., • Address all technical questions and concerns from field personnel and facilitate general project communication., • In all job activities, maintain project integrity and company reputation through compliance with industry and company standards and best practices as defined by the company leadership. Requirements: Education & Experience Requirements/Preferences Required: BS in Mechanical, Electrical or Aerospace Engineering Preferred: 2 - 4+ years of related (HVAC, building controls, construction) work experience Technical Requirements • Knowledge and understanding of all HVAC systems as it relates to controls., • Advanced knowledge of control systems and design principles., • Ability to interpret HVAC mechanical plans and specifications., • Good project visualization and schematic design skills required., • Competence with Microsoft Office., • Proficiency in technical writing., • Ability to explain technical information to technical and non-technical audiences., • Mechanical aptitude and engineering common sense is a necessity., • Effective communication and interpersonal skills to represent the company to customers and other outside contacts in an ethical and professional manner., • Willingness to be taught and the ability to learn quickly., • Must have good organization, multitasking and time management skills., • Self-motivated and a strong work ethic, with an attitude that enables yourself and others to perform., • Attention to detail and willingness to coordinate and confirm project details and assumptions, • Enjoy diverse working environments and occasionally being on construction sites., • Be able to work on multiple projects in parallel with varying schedule constraints., • Think logically, be flexible, and possess common sense., • Competitive Salary, • Medical, Dental, and Vision Insurance paid 100% for the Employee, • Additional Company Sponsored Benefits: Basic Employee Life Insurance, Long Term Disability Coverage, Employee Assistance Program, • Voluntary Benefits: Employee Life Insurance, Spouse Life Insurance, Child Life Insurance, Short Term Disability, Accident, Employee Critical Illness, Spouse Critical Illness, and Child Critical Illness., • 401k Plan (including a 4%?Company Match Contribution), • Company provided car or car allowance – Gas full paid for by ASG

Job DescriptionSalary: $30.00 - $34.00 per hour Joseph J. Albanese Inc. is seeking a detail-oriented and motivated Payroll Specialist to join our Finance team. The Payroll Specialist will play a crucial role in the timely and accurate processing of payroll, maintaining accurate payroll records, and ensuring that all required certified payroll documents have been received from trucking partners before and during their participation on the job site. Voted Best Places to Work for the past 7 years in a row, JJA is a dynamic, fun environment with significant career opportunities to further grow and develop professionally. ESSENTIAL DUTIES & RESPONSIBILITIES: • Process weekly payrolls for all union and non-union employees, ensuring accuracy and compliance with company policies and applicable laws., • Maintain up-to-date payroll records, including timecards, deductions, direct deposits, and tax withholdings., • Enter, review, and audit employee hours and payroll data to detect and resolve discrepancies in a timely manner., • Respond promptly to employee inquiries regarding payroll, timesheets, and related matters., • Review insurance documents for required coverage amounts, expiration dates, and additional insured endorsements., • Monitor, input, and request truckers' certified payroll and ensure compliance with job requirements., • Monitor trucking and prepared specialized compliance reporting for assigned projects., • Weekly review of missing or expired compliance documents., • Collaborate with Project Teams, HR, and accounting departments to ensure accurate status updates of insurance documents, employee records, and payroll transactions., • Ensure compliance with federal, state, and local payroll, wage, and hour laws and best practices., • Maintain confidentiality of sensitive payroll information at all times. NOTE:These duties listed are meant to describe the general scope of the work. Other duties may be assigned based on business needs within the organization. QUALIFICATIONS: • High school diploma or equivalent required; Associates or Bachelors degree in Accounting, Business, or a related field preferred., • 3 years of experience in an administrative or clerical role, construction experience preferred., • 3+ years of payroll or certified payroll reporting experience., • Experience with Vista Viewpoint software is preferred but not required., • Experience with Elation, LCP Tracker, DIR, Marsh, AON, and/or Gallagher certified payroll systems., • Understanding of payroll labor laws, wage scales, union agreements, benefit programs, prevailing wage requirements, and labor compliance laws., • Proficient in Microsoft Office Suite, especially Excel, Outlook, and Word., • Strong attention to detail, excellent organizational skills, and effectively multitask., • Effective communication and interpersonal skills., • Ability to handle sensitive information with discretion and integrity., • Strong problem-solving skills and the ability to work independently. OTHER: • General work environment sitting for long periods, standing, walking, typing, and bending., • Occasional lifting of up to 20 lbs. WHY JOIN JJA: Joseph J. Albanese is a family-owned construction business established and based in Santa Clara, California since 1955. With approximately 1000 employees the company has been instrumental in developing Silicon Valley by performing site / structural concrete, demo, grading, and paving for many of the outstanding projects in Northern California. Our core values of Safety, People, Quality, and Truth! JJA utilizes BIM and other cutting-edge technology to verify constructability and to communicate complex project geometries to field professionals. We offer competitive pay and benefits. See some of our highlighted projects on our website at. Joseph J. Albanese, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionDescription: Overview The Senior Programming Engineer works with the Lead Programming Engineer to lead, mentor and grow our Programming Engineer group. The Senior Programming Engineer is also responsible for creating a database of control programs that comprises the Building Automation System for large complex systems. We strive to continually develop the skills of our employees and as the Senior Programming Engineer you will have a direct impact on the advancement of our Programming Engineers, ensuring they have the support they need. You will work closely with our sales department, project managers, design engineers and field personnel to ensure the success of the project. The Company ASG strives to be the trusted partner to our customers, to adopt proven technologies and to enhance the lives of our team members. Our team members are passionate about smart building technologies, with the goal of promoting healthy & environmentally friendly buildings through the provision of complete and reliable building management systems. We install such control systems on new construction and retrofit projects, including large commercial research and development office campuses, data centers, bioscience, semiconductor clean rooms, and government laboratory campuses. ASG has a reputation for exceeding customer expectations and consistent execution. Our team members continue this tradition through their passion, integrity and desire to improve. Requirements: Job Responsibilities The following list captures the general responsibilities; however, each project has different specifications, goals, environmental conditions, and financial considerations. For large complex projects. • Develop equipment and system programs that meet the intent of the project scope and provide for the intended performance of the system(s)., • Develop equipment and system graphics that provide intuitive and cohesive user experiences within the bounds of projects' scope., • Delegate tasks to less experienced engineers based on skills and understanding., • Perform QA/QC of equipment and system programs and graphics to ensure it meets company standards, project scope and design intent., • Continually track, review, and assist (if needed) all projects to ensure deadlines are met., • Facilitate the training and development of new engineers., • Promote communication between the field and engineering team to address all technical questions and concerns., • Takes initiative and develops new engineering standards., • In all job activities, maintain project integrity and company reputation through compliance with industry and company standards and best practices as defined by the company leadership., • Execution of highly varied Building Automation projects per the project schedule and design documents., • Provide system start-up, checkout and commissioning assistance.[KE2], • Provide owner training of control system operations and capabilities. Required: BS in Mechanical, Electrical or Aerospace Engineering Preferred: 3 - 5+ years of related (HVAC, building controls, construction) work Technical Requirements • Knowledge and understanding of all HVAC systems as it relates to controls., • Advanced knowledge of control systems and programming principles., • Ability to interpret HVAC mechanical plans and specifications., • Good project visualization and schematic design skills required., • Proficiency in technical writing., • Ability to explain technical information to technical and non-technical audiences., • Mechanical aptitude and engineering common sense is a necessity., • Knowledge of Automated Logic ecosystem., • Knowledge of TCP/IP network structure and communication protocols., • Experience with email, web, and database server configuration a plus., • Effective communication and interpersonal skills to represent the company to customers and other outside contacts in an ethical and professional manner., • Willingness to be taught and the ability to learn quickly., • Must have good organization, multitasking and time management skills., • Self-motivated and a strong work ethic, with an attitude that enables yourself and others to perform., • Attention to detail and willingness to coordinate and confirm project details and assumptions, • Enjoy diverse working environments and occasionally being on construction sites., • Be able to work on multiple projects in parallel with varying schedule constraints., • Think logically, be flexible, and possess common sense., • 401k matching, • Medical, dental, vision insurance, • Company provided car or car allowance - Gas fully paid for by ASG, • Fully paid employee medical insurance premium

Job Description TITLE: Maintenance Engineer POSITION TYPE: Full Time, Non-Exempt COMPANY: Sharks Sports and Entertainment, LLC LOCATION: San Jose, California REPORTS TO: Chief Engineer POSTING DATED: June 04, 2024 PAY RANGE: $72.93 per hour - (Local 39- Salary Schedule) Position Overview The Maintenance Engineer position offers an opportunity to work with state-of-the-art equipment in a well-managed environment that is exciting and challenging. The engineer functions as part of a maintenance team responsible for ensuring the smooth and efficient day-to-day operations of a world class entertainment facility. Essential Duties and Responsibilities: • Monitors, troubleshoots and repairs a variety of equipment., • Takes temperature and humidity readings and performs consumption calculations., • Assists in the operation of plant utilities to ensure peak efficiency and reliability of gas, electrical, chilled brine, and hot water plants., • Ensures various equipment is maintained and operated in a safe efficient manner., • Responsible for HVAC, lighting, boiler, heaters, fire life safety equipment, and other equipment including trash compactors and commercial kitchen equipment., • Performs preventive/reoccurring maintenance on equipment., • Identifies defective parts, researches replacement parts, deals with vendors while ordering parts and installs parts upon arrival., • Answer service calls, and deal with internal & external customers. Minimum Qualifications: • Minimum of 5 years maintenance Engineering experience, 4 years education or equivalent combination of both., • Plumbing experience is required., • Required to work independently for most of the time, must be a self-starter., • Requires large tonnage refrigeration experience and a universal CFC license., • Heavy electrical experience (277v 480v) and Direct Digital Controls (DDC) experience with standard industry equipment., • Experience in maintaining large & small boilers, pumps, refrigeration equipment, air compressors and secondary systems is required., • Experience in maintaining all natural and manufactured gas distribution lines., • Considerable knowledge of electrical and mechanical systems with the ability to analyze their design intent and performance., • Knowledge of all types of motors and engines used to power pumps, compressors, and fans., • Knowledge of construction and building systems., • Experience repairing locks and re-keying preferred., • Must have experience with water filters, piping, and pumps., • General maintenance of water heaters, washing machines, and dryers., • Knowledge of building and maintaining automation systems for HVAC., • Carpentry and electrical experience are required., • Must be able to read and interpret manufacturer's instructions, blueprints, and schematics and to determine wire colors to perform safe repairs., • Experience with fire alarm and fire suppression systems., • Must be able to perform general maintenance on elevators, forklifts, and vehicles., • Knowledge and experience working on audio-visual and media presentation systems., • Must be proficient in Microsoft Outlook software applications., • Excellent customer service skills required., • Must be able to communicate effectively with all levels of staff, vendors, and guests., • Must possess a valid California driver's license., • Requires finger and hand dexterity to manipulate switches and buttons., • Maintenance Engineer's Basic Tools are required, see the following list:, • Tool Box, • Adjustable Wrenches, 6" and 1O", • Allen Wrench Set (Small Sizes), • Nut Driver Set, 3/16" to 1/2", • Screwdriver Sets, Standard (3), • Screwdriver Sets, Phillips (3), • Holding Screwdrivers, flat and Phillips, • Open End & Box Wrench Set, 3/8" to 3/4", • Plastic Tip Brush, • Wire Brush, • Vice Grips, 7", • Crimping Tool for Wire Ends, • Flashlight (with batteries), • Fuse Puller, • Hammer, • Needle Nose Pliers, • Lineman Pliers, • Channel Type Pliers, 8", • 18 Foot Tape, • Torpedo Level, • Pocket Knife, • Putty Knife, • Razor Blade Scraper, • Medium File, 12", • This role entails various physical demands, including stooping, crouching, reaching, pushing, pulling, and lifting, with or without accommodation., • Ability to navigate stairs and catwalks at SSE facilities during both regular work hours and events, with or without accommodation., • Capability to climb ladders or utilize a man lift to work at heights up to 100 feet, often requiring reaching overhead, with or without accommodation., • Must be able to bend at the waist, reach overhead, and lift objects weighing up to 50 lbs, with or without accommodation., • Must be able to perform duties in a confined space and in awkward positions, with or without accommodations., • Competitive compensation, • Employee referral bonus, • Complimentary or discounted sports and event tickets, • Free Barracuda tickets, • Access to presale ticket offers for concerts, • 30% discount in the Sharks Pro Shop, • 50% discount on food and beverages when working, • Free downtown parking when working, • Spot Pet Insurance option, • Employee recognition program, • Free ice skating at Sharks Ice (San Jose, Fremont, and Oakland), • An inclusive culture that values diversity of background and a passion to improve our SSE's commitment to change with impact on our community and industry This position is not eligible for U.S. work authorization sponsorship. Summary: Born in 1991, Sharks Sports and Entertainment ("SSE") has grown into a multi-faceted organization that includes the SAP Center, the NHL San Jose Sharks, the AHL San Jose Barracuda, the Tech CU Arena, three Sharks Ice facilities, and the non-profit Sharks Foundation. Additionally, we are growing our organization through expansion in the Bay Area and surrounding communities in Northern California. We work and play in the Bay Area, and are deeply influenced by the technology, innovation, diversity, and commitment to excellence that surrounds us. Our culture is transforming to reflect those values, with an eye towards a pioneering, forward-thinking, and inclusive environment in sports and entertainment. We live, work, and innovate by a set of Pioneering Principles: T - Team success is more important than individual success E - Exceptional experience is non-negotiable in everything we do A - Appreciate others for their diversity and opinions M - More risk leads to more rewards and expands our comfort zones T - Trust that all teammates have the best intentions E - Empower all teammates to make informed decisions A - Always say what you really mean and do what you say L - Lead by showing the respect to others you expect from them We strive to unite people through a shared love of ice sports, entertainment, and our hometown. We are #TealTogether. Our Commitment to Diversity, Inclusion & Belonging Here at Team Teal, we recognize and celebrate that individuals come with a wealth of experience and talent well beyond any list of required skills and qualifications - in fact, we believe diversity of backgrounds and skills, combined with passion, are the most important keys to meaningful innovation and excellence. Therefore, we encourage people from all backgrounds to apply to our positions. Please let us know if you require accommodations during the interview process. Equal Opportunity Employer Sharks Sports and Entertainment is an equal opportunity employer. We accept our responsibility to make employment decisions without regard to race, religious creed, color, age, sex, sexual orientation, gender identity, gender expression, national origin, marital status, medical condition as defined by state law (genetic characteristics or cancer), physical or mental disability, military service or veterans' status, pregnancy, childbirth and related medical conditions, genetic information, or any other classification protected by applicable federal, state, and local laws and ordinances. Notice to Recruiters and Agencies SSE recruits candidates directly, rather than through third-party recruiters or agencies. Under no circumstances will SSE pay a fee for candidates submitted or presented without a signed recruiting agreement in place between SSE and the recruiter or agency prior to the submittal; any submittal must be for requisition specifically and individually assigned in writing by SSE's HR department. In the case of candidate(s) submitted or presented to SSE by a recruiter or agency without a signed agreement AND written assignment by SSE Human Resources, SSE explicitly reserves the right to pursue and hire those candidate(s) with no financial obligation to the recruiter or agency. Job Posted by ApplicantPro

Job Description 🚧 Jumpstart Your Construction Career with Dome! Now Hiring: Project Engineer (Entry-Level) 📍 San Jose, CA | Full-Time | On-Site & Office Blend Ready to build your future with one of California's most respected construction firms? At Dome Construction, we're not just constructing buildings—we're building people, careers, and long-term success stories. We're on the hunt for a Project Engineer—someone who's eager to learn, excited to contribute, and ready to get their hands dirty (literally and figuratively). Whether you've got a degree in Construction Management or just a serious passion for the industry, we want to hear from you. 🔍 What You'll Do As a Project Engineer at Dome, you'll be the bridge between the field and the office, keeping everything running smoothly and efficiently. You'll work closely with seasoned Project Managers and Superintendents to bring complex commercial and industrial construction projects to life. Here's what your day might include: • Coordinating with architects, engineers, trade partners, and clients, • Walking active job sites, identifying and solving issues before they become problems, • Managing key documentation like RFIs, submittals, and project logs, • Supporting schedules, logistics, and financial tracking Bonus points if you: • Have 0–3 years of experience in construction or engineering roles, • Know your way around Procore, Bluebeam, MS Project, or similar tools, • Have experience (or a strong interest) in commercial, industrial, or tenant improvement projects, • Training & Development: We invest in you from Day 1. Learn from the best and grow your career fast., • Diverse Projects: From biotech labs to tech campuses, you'll be exposed to a wide range of cutting-edge projects., • Supportive Team Culture: We believe in collaboration, mentorship, and having each other's backs., • Real-World Impact: You won't just sit behind a desk—you'll be in the field, helping deliver projects that make a difference.✈️ Perks & Logistics, • Blend of office + fieldwork (never a boring day!), • Must have a valid driver's license and reliable transportation Apply now and bring your ambition to Dome! (Pay dependent of experience, skill, knowledge)San Francisco Bay Area Pay Range $85,000—$95,000 USDPrivacy Notice: Pursuant to the California Consumer Privacy Act (CCPA), the Company is notifying you that by applying for a position, you are providing us the following categories of personal information that we may use to evaluate your candidacy for employment, communicate with you regarding your candidacy, and obtain and verify background checks, and references: Personal Identifiers (e.g., name, SSN); Contact Information (e.g., mailing address, email, phone number), Employment History (e.g., current and former positions held, work experience, and any certifications or licenses), and Education History. By clicking "Send" below, I acknowledge and confirm that I have received and read and understand this notice, and I authorize and consent to the Company's use of the personal information it collects, receives or maintains for the business purposes identified above.The job duties for this position [will/may] entail assignment at a customer worksite where the customer has a requirement that all Dome's personnel must be vaccinated to enter the worksite, and the customer's policy has no exemptions. While Dome must operate within the customer's worksite requirements, Dome will provide reasonable accommodations to employees who cannot be vaccinated because of a disability/medical reason or sincerely-held religious beliefs.

Job DescriptionWho We AreAt PRIME, a culture of empathy, trust, and belonging are foundational. This is integral in our approach to recruiting, developing, and retaining the best people in the industry. Our growth mindset drives us to embrace challenges and discover what sparks inspiration for creative solutions. PRIME is compelled to keep evolving, and creating new opportunities for those who perform. Our comprehensive services cover the entire lifecycle of a project, capabilities include electrical construction, service and maintenance, underground, utilities services, renewable energy, and low voltage technology solutions. Recognized as one of Silicon Valley’s Best Places to Work!What You Will Do • Solar PV, DC and AC schematic designs, • Single line Diagrams and stringing layouts, • Conduit and feeder schedules, • Rooftop solar electrical and mechanical layouts, • DC string calculations and general electrical AC distribution calculations, • Coordination with other construction trades and disciplines, • Back check of own work for accuracy and completeness before submission to others, • Work closely with the Prime Electric Operations Project Manager to coordinate the design criteria, • Perform other duties assigned by Director of Engineering, • Review plans and technical specifications, contract documents, and estimates under the supervision of the Chief Engineer, • Work on the design and on-going progress of a project, including the coordination of the project with other team members, • Provide technical design, consultation, information, and assistance to internal and external customers.What You Will Need to be Successful, • Bachelor's degree in Electrical Engineering or similar field, • Experience with AutoCAD, Revit & Navis Manage a plus, • Experience with industry manufacturer design tools (i.e solaredge designer, ironridge design tool, ClawOS etc.) a plus

Job Description We are seeking a Interior Designer to join our team! Studio Schicketanz is a full-service architectural firm providing a wide range of architecture, planning, and interior design services. • Based in Carmel, our firm specializes in customized residential and commercial architecture and interiors., • We are known for environmentally conscious designs and are dedicated to creating sustainable projects that draw upon the strengths of their natural surroundings. Carmel Interior Design firm is looking for a motivated, energetic, and highly organized designer for our Interior Design Department. The ideal candidate is detail-oriented and can be self-sufficient while working as part of a team. Applicant should have a bachelor’s degree in Interior Design or Interior Architecture, and a minimum of 3 years of work experience. Applicant should be proficient in REVIT, AutoCAD, Adobe Photoshop, Google Sketchup, Microsoft Office Suite (specifically, Word, Excel, Outlook and Publisher). Must have excellent time management, follow through and organizational skills. The right candidate should feel comfortable working in a fast-paced office environment and be adaptable to changes in priorities and deadlines. Responsibilities include but are not limited to: • Drafting floorplans, interior elevations, furnishing plans, furniture, and details using REVIT, • Sourcing architectural interior finishes, furnishings and fabrics, • Preparing Plumbing, Appliance, Finish and Furnishing schedules, • Preparing renderings, presentation materials, and specifications for client presentations, • Obtaining quotes and samples, • Work with the design assistant to keep furniture spreadsheets updated for order processing, • Work with consultants, contractors, fabricators, specification writers, and agencies to meet overall project objectives, • Ensure correct production of furniture and on-time delivery, • Assist in supervising furnishing inspections and installations, • The applicant should have a bachelor’s degree in Interior Design or Interior Architecture. Minimum of 2 years work experience required., • Produce accurate technical and contract documentation for construction of project, • Intermediate presentation and graphic communication skills, • Knowledge of building systems, codes and ADA requirements, • Applicant should be proficient in REVIT, AutoCAD, Adobe Photoshop, Microsoft Office Suite (specifically, Word, Excel, and Outlook)., • LEED accreditation preferred or required within 6 months of hire Location: Carmel Hours: Full Time - 40 Hours in Office Compensation: Hourly: Based on Experience Principals only. Recruiters, please don’t contact this job poster. Please do not contact job poster in regards to other services, products, or commercial interests. Company DescriptionWe are dedicated to creating projects that fully integrate the dreams and needs of our clients with the nature of their sites while honoring the principle of sustainability.We are dedicated to creating projects that fully integrate the dreams and needs of our clients with the nature of their sites while honoring the principle of sustainability.

Job Description We have an immediate need for an Senior Archaeologist in the Santa Clara and Fremont areas. This position requires oversight and implementation of biological, archaeological, and safety compliance on the jobsite. Position is a long-term part-time position, two full days per week. Duties and Responsibilities • Responsible for reviewing project documents and evaluating requirements, • Review and document if any protect bird species, nests, and buffers are present, • Conduct daily field inspections to ensure all compliance is met, • Responsible for submitting daily inspection reports along with required photos to stakeholders, • Ability to conduct training providing daily environmental updates, • Have a clear understanding and coordinate with construction team determining the planned work activity along with any construction change orders, • May attend construction meetings as required Education and Experience • Bachelor’s Degree in Biology, Environmental Science, Ecology, Anthropology, Archaeology or related field, • 7 plus of relevant experience or demonstrated equivalency of experience and/or education, • Experience conducting construction compliance monitoring along with demonstrated experience evaluating habitat suitability and identifying special-status wildlife in the Bay Area, • Knowledge and ability to identify general native and non-native plant and animal species, • Clear understanding of state and federal laws regarding the protection of species and habitats, • Knowledge of permit application requirements, • Excellent communication skills with detailed documentation with exceptional organizational skills, • Proficiency with Microsoft Office to include Excel, • Valid US Driver’s license required Compensation based on experience (Environmental, Compliance, Monitor, Biology, Archaeologist, Ecology, Construction, Field, Species, Habitat) Company DescriptionAbout us: 347 Group, Inc. provides staffing resources to a variety of industries. We have an experienced team of staffing professionals and provide a wide range of services to our clients. Visit our website us:\r\n\r\n347 Group, Inc. provides staffing resources to a variety of industries. We have an experienced team of staffing professionals and provide a wide range of services to our clients. Visit our website .

Job Description We have an immediate need for an Environmental Compliance Inspector in the Santa Clara and Fremont areas. This position requires oversight and implementation of biological, archaeological, and safety compliance on the jobsite. Position is a long-term part-time position, two full days per week. Duties and Responsibilities • Responsible for reviewing project documents and evaluating requirements, • Review and document if any protect bird species, nests, and buffers are present, • Conduct daily field inspections to ensure all compliance is met, • Responsible for submitting daily inspection reports along with required photos to stakeholders, • Ability to conduct training providing daily environmental updates, • Have a clear understanding and coordinate with construction team determining the planned work activity along with any construction change orders, • May attend construction meetings as required Education and Experience • Bachelor’s Degree in Biology, Environmental Science, Ecology, Anthropology, Archaeology or related field, • 7 plus of relevant experience or demonstrated equivalency of experience and/or education, • Experience conducting construction compliance monitoring along with demonstrated experience evaluating habitat suitability and identifying special-status wildlife in the Bay Area, • Knowledge and ability to identify general native and non-native plant and animal species, • Clear understanding of state and federal laws regarding the protection of species and habitats, • Knowledge of permit application requirements, • Excellent communication skills with detailed documentation with exceptional organizational skills, • Proficiency with Microsoft Office to include Excel, • Valid US Driver’s license required Compensation based on experience (Environmental, Compliance, Monitor, Biology, Archaeologist, Ecology, Construction, Field, Species, Habitat) Company DescriptionAbout us: 347 Group, Inc. provides staffing resources to a variety of industries. We have an experienced team of staffing professionals and provide a wide range of services to our clients. Visit our website us:\r\n\r\n347 Group, Inc. provides staffing resources to a variety of industries. We have an experienced team of staffing professionals and provide a wide range of services to our clients. Visit our website .

Job Description Solar Sales Manager / Regional Business Development Manager - Commercial & Multifamily Company: Our client is a well-established solar company with a fantastic reputation for excellent service on residential single and multifamily dwellings, along with commercial buildings. Opportunity: We are currently looking for a successful Commercial Solar Sales Manager / Business Development Manager to drive and manage multifamily/commercial solar projects throughout the California region. Project sizes will range in size from 20kW – 1MW, mainly in existing retrofit and some new construction. The Commercial Solar Sales Manager will be responsible for managing the projects from internal project award all the way to permission to operate. Responsibilities: • Engage with customers and other relevant trade partners as the main point of contact during the projects, • Own and drive all commercial and large scale multifamily apartment projects, • Create schedules and drive project deliverables, • Oversee design and engineering of projects with CAD design team, • Manage and coordinate permits with permitting coordinator working with AHJ, • Manage utility applications with the internal team, • Coordinate procurement of materials with purchasing team, • Coordinate and provide direction to Superintendents and field crews, • Coordinate and manage invoicing, • Perform estimates and budgeting, • Assist project management/developers with budgeting, bidding, designing, and contracting projects, • Must have direct solar sales experience with a minimum of 3+ years of commercial and/or multifamily solar photovoltaic (PV) experience, • 2+ years of project management in construction operations with a solid understanding of commercial project life cycles, • Experience working with Helioscope and Energy Toolbase is highly desired, • Must have strong problem-solving skills, • Proven ability to multitask while meeting deadlines and keeping projects within budget, • Must have strong organizational and record-keeping skills, • Hands-on experience with CRMs such as SalesForces tracking leads and sales, is preferred, • Knowledge of commercial and residential building codes - AHJ, • Knowledge of multi-family PV interconnections as well as Virtual Net Energy Metering (VNEM), • Knowledge of 3-phase electrical system, • Knowledge of commercial solar equipment including: panels, racking, inverters, and batteries, • Knowledge of all system types: tilt and flat roof mount, ground mounts, carports, ballasted, and hybrid systems, • Medical, Dental, Vision, 401(k) Salary 100K to 120K plus generous commission. The compensation listed below is salary plus bonus. Negotiable for the right candidate

Job Description Crusoe is on a mission to accelerate the abundance of energy and intelligence. As the only vertically integrated AI infrastructure company built from the ground up, we own and operate each layer of the stack — from electrons to tokens — to power the world's most ambitious AI workloads. When you join Crusoe, you join a team that is building the future, faster. We're in the midst of the greatest industrial revolution of our time. The demand for AI compute is boundless, and power is a bottleneck. We're solving that — with an energy-first approach that makes AI infrastructure better for the world and faster for the people innovating with AI. We're looking for problem-solving, opportunity-finding teammates with a sense of urgency, who believe in the scale of our ambition and thrive on a path not fully paved — people who want to grow their careers alongside a team of experts across energy, manufacturing, data center construction, and cloud services. If you want to do the most meaningful work of your career, help our customers and partners advance their AI strategies, and be part of a high-performing team that believes in each other, come build with us at Crusoe. About the Role: As a Product Designer at Crusoe you will be an integral part of the Crusoe Cloud and AI product team, own impactful projects and take them from idea to execution in a fast paced environment. You will be embedded into a product area, be pro-active and take initiative to work collaboratively with other functions. You’ll work on defining the problem, conducting early research, defining the interactions, creating clear artifacts that guide decision making and execution. What You'll Be Working On: * Help define and drive strategic product direction and long term product vision - challenging the status quo with fresh, user centric perspectives for AI developers and platform engineers * Own the end to end design process - translating user journeys and technical constraints into simple, elegant and shippable solutions * Create sketches, flows, prototypes and high fidelity visuals for your features and rapidly iterate the designs based on user feedback * Strong ability to iterate through the design process, give and receive critiques and rapidly incorporate feedback * Ensure a high quality implementation by working closely with engineering * Present the solutions to product managers, engineers and other stakeholders What You'll Bring to the Team: * Cloud Platform Fluency: Product design experience with a demonstrated track record designing for cloud infrastructure, developer platforms, or data-heavy enterprise products. * IT Admin Tools Expertise: Deep familiarity with complex B2B workflows including role-based access, multi-tenant systems, admin tooling, and operator-facing dashboards that translate dense technical data into clear, actionable interfaces. * AI-First Design Practice: A proven ability to design AI-powered products and leverage AI tools (such as Cursor, Lovable, Figma Make, or Claude Code) to accelerate prototyping, iteration, and design-to-dev handoff. * End-to-End Ownership: Experience driving design from discovery through delivery — conducting user research, defining interaction models, building prototypes, writing content and partnering closely with product and engineering to ship. * Technical Fluency: Comfort working with engineers and product managers in fast-paced, resource-constrained environments, with the ability to translate complex system requirements into simple, elegant, and shippable experiences. * Craft & Communication: Exceptional visual design and storytelling skills, with the ability to present work clearly at multiple altitudes — from high-level strategy to pixel-level detail — and influence cross-functional stakeholders. Bonus Points: * Startup DNA: Experience as a founding or sole designer at an early-stage company, comfortable with ambiguity and moving fast with limited resources. * Cloud Infrastructure Background: Direct experience designing for cloud hyperscalers, AI infrastructure providers, or developer-facing cloud consoles (AWS, GCP, Azure, Databricks, Vercel, or similar). * Vibe Coding: Hands-on experience building functional prototypes or design tools using AI coding environments such as Replit, Cursor, or Claude Code. * Data Visualization: Experience designing dashboards and data-dense interfaces that surface complex metrics clearly for technical and non-technical users. * Design Systems at Scale: Experience building or contributing to a component library or design system used across multiple product teams. Benefits: * Competitive compensation * Restricted Stock Units * Paid time off & paid holidays * Comprehensive health, dental & vision insurance * Employer contributions to HSA account * Paid parental leave * Paid life insurance, short-term and long-term disability * Professional development & tuition reimbursement * Mental health & wellness support * Commuter benefits (parking & transit) * Cell phone stipend * 401(k) Retirement plan with company match up to 4% of salary * Volunteer time off Compensation Range Compensation will be paid in the range of up to $127,500 - $150,000 + Bonus. Restricted Stock Units are included in all offers. Compensation to be determined by the applicants knowledge, education, and abilities, as well as internal equity and alignment with market data. Crusoe is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

Job Description Crusoe is on a mission to accelerate the abundance of energy and intelligence. As the only vertically integrated AI infrastructure company built from the ground up, we own and operate each layer of the stack — from electrons to tokens — to power the world's most ambitious AI workloads. When you join Crusoe, you join a team that is building the future, faster. We're in the midst of the greatest industrial revolution of our time. The demand for AI compute is boundless, and power is a bottleneck. We're solving that — with an energy-first approach that makes AI infrastructure better for the world and faster for the people innovating with AI. We're looking for problem-solving, opportunity-finding teammates with a sense of urgency, who believe in the scale of our ambition and thrive on a path not fully paved — people who want to grow their careers alongside a team of experts across energy, manufacturing, data center construction, and cloud services. If you want to do the most meaningful work of your career, help our customers and partners advance their AI strategies, and be part of a high-performing team that believes in each other, come build with us at Crusoe. About This Role: Crusoe’s Procurement and Supply Chain team is seeking a detail-oriented, analytical, and intellectually curious Procurement Operations Analyst to support the Data Center Deployments & Operations team. In this role, you will sit at the intersection of sourcing, supplier management, systems, and data - transforming procurement activity into structured insights that drive cost efficiency, supply chain efficiency, and supplier relationships. We are looking for a motivated professional with a background in business analysis, procurement, supply chain, or consulting. This is a full-time position with flexibility to be based in San Francisco (CA), Sunnyvale (CA), or Seattle (WA). What You'll Be Working On * Cross-Functional Partnership: Be the bridge between critical cross-functional partners to help accelerate initiatives across Site Readiness, Supply Chain, Finance, and Sustainability teams * Process Optimization: Partner with the Engineering, Construction, and Operations team to establish and implement an end-to-end iterative playbook for DC Deployments & Operations * Market Insights: Support with providing market and supplier insights that support sourcing strategy and mitigate supply chain risk * Asset Tagging: Build up a mechanism to tag all data assets inside the data center for the DC Deployments & Operations team * Strategic Reporting: Partner with Finance to ensure accurate tracking of all spend vs budgets for data center deployments * Data Integrity & Governance: Oversee data accuracy for quotations and spend tracking * Ad-Hoc Agility: Support with rapid-turnaround analysis on fragmented or "dirty" datasets to support immediate business needs What You’ll Bring to the Team: * Education: Bachelor’s degree in Business Analytics, Supply Chain, International Trade, Information Systems, or a related field * Experience: Approximately 1-3+ years of experience in data analytics, preferably within a supply chain, procurement, or sourcing organization * Program Management: Experience leading projects or initiatives for a fast-moving industry, preferably in the data center industry * Communication: Proven ability to present data-heavy findings clearly to non-technical executive stakeholders * Technical Proficiency: Proficiency in Power BI/ Tableau, and also foundational knowledge in Python, R, or SQL * Proactiveness: A "self-starter" mentality - the ability to identify a problem and build the analytical framework to solve it independently Bonus Points * Experience using AI and its application in automating workflow processes * Knowledge of procurement, sourcing, and supply chain in the data center industry * Experience in program management with a strong technical background Benefits * Opportunity for career growth in a high-impact organization and industry * Industry competitive pay * Restricted Stock Units in a fast growing, well-funded technology company * Health insurance package options that include HDHP and PPO, vision, and dental for you and your dependents * Employer contributions to HSA accounts * Paid Parental Leave * Paid life insurance, short-term and long-term disability * Teladoc * 401(k) with a 100% match up to 4% of salary * Generous paid time off and holiday schedule * Cell phone reimbursement * Tuition reimbursement * Subscription to the Calm app * MetLife Legal * Company paid commuter benefit; $300 per month Compensation Compensation will be paid in the range of $98,600 - $116,000 + Bonus. Restricted Stock Units are included in all offers. Compensation to be determined by the applicant's education, experience, knowledge, skills, and abilities, as well as internal equity and alignment with market data. Crusoe is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

Job Description Who We Are HMC Architects is an employee-owned design firm with a desire to make a difference in our communities. As a purpose-driven firm based on values, our mission to design for good drives everything we do. And our ownership culture creates alignment and increased commitment to that mission, keeping us on track to being successful. What We Do Founded with the purpose of anticipating community needs, HMC aims to create designs that have a positive impact, now and into the future. We focus primarily on opportunities to have the most direct contribution to communities–through healthcare, education, and civic spaces. Why Join HMC As an employee owned company you become an owner after one year—receiving company-provided shares at no cost and building long-term financial growth as the firm succeeds. We also give back through our volunteerism with our Designing Futures Foundation, which advances sustainable and regenerative design and supports the next generation of innovators. In addition to this, we also support our team through: • Culture: We put people over profits, giving them the flexibility to manage their work and life. We believe in fairness, equality in opportunity, and rewarding those who perform., • Wellness: company paid wellness courses, on-site gyms (at select locations), access to financial advisors and discounts to wellness platforms, gyms and more., • Professional Development: LinkedIn learning access, business development training, supportive mentorship, company-paid ARE study materials, exam fees, and licensure completion bonuses. The Designer supports the architectural design team through all phases of a project, from concept through construction administration. This role assists with design development, Revit modeling, construction documentation, and presentation materials while ensuring design intent, quality, and adherence to accessibility codes and office standards. This position is located in our San Jose, CA office. The position requires 3 days in the office and the ability to work from home Mondays and Fridays. Responsibilities • Assist in project design documentation using Revit, including 3D modeling and material research, • Prepare and organize working drawings and basic “block-out” drawings (site plans, floor plans, elevations), • Support design development and construction documents across all project phases, • Help produce marketing and interview presentation materials, • Assist with plan check processes and apply accessibility codes to drawings, • Support construction administration, including submittal and shop drawing reviews and RFIs, • Incorporate red-line markups from supervisors accurately and thoroughly, • Estimate hours for assigned tasks and complete work within agreed budgets, • Architectural degree from an accredited university, • Minimum 1 year of architectural design experience preferred, • Proficiency in Revit, including advanced editing, drawing setup, and file management, • Understanding of construction documents, drawing organization, and architectural terminology, • Familiarity with CAD/Revit fundamentals such as layers, plotting, dimensions, viewports, and file maintenance, • Strong verbal and written communication skills, • Ability to manage time, prioritize tasks, and work independently, • Professional, respectful demeanor with clients, consultants, and team members The actual offered salary for this position will vary depending on multiple factors including the candidate’s qualification, education, position knowledge, work experience, skills, ability, work location, and internal incumbent compensation for similar roles. We do not anticipate individuals hired into this position will start at or near the top half of the range listed; the decision will be based on each individual case. The salary range listed above does not include other compensation elements such as discretionary bonus opportunities, employee stock ownership grants, paid time off, medical insurance, and other wage and benefit opportunities.

Job DescriptionJOB DESCRIPTION DEPARTMENT: IT POSITION: Network Administrator LOCATION: San Jose, CA CATEGORY: Exempt, Full Time, 100% On-site. Requires flexibility to workday and swing shifts based on operational needs. JOB FUNCTION: The Network Engineer is a critical member of the IT team, responsible for the planning, design, optimization, and daily operational excellence of the company’s network architecture. This role involves managing data centers, driving network improvements and standardization, ensuring robust security, and proactively troubleshooting and resolving complex network issues in a timely manner. The Network Engineer will also lead and participate in various network projects and ensure seamless cross-departmental coordination. QUALIFICATIONS: EDUCATION: • BA/BS in Information Management, Computer Engineering, Information Technology, or other related fields are required.EXPERIENCE:, • With 5 to 8 years of relevant experience in network technology, with a proven track record in both network design/implementation and complex troubleshooting.SKILLS:, • Clear understanding of network architecture design (including WAN and LAN), familiarity with the latest network solutions, and practical experience in the design and implementation of large-scale networks, particularly in the manufacturing sector, is preferred., • Good thinking logic and strong architectural design abilities, capable of integrating requirements at various levels to design and standardize solutions., • Proficient knowledge and hands-on experience with Fortinet or Palo Alto firewalls are required., • Strong knowledge of wireless network technologies and solutions, including experience with platforms such as Cisco WLC, Aruba, or Fortinet wireless., • Familiarity with various other network devices and technologies, including routers and switches., • Knowledge of Cumulus and Arista switches are preferred., • Solid foundational knowledge of networking, including familiarity with the TCP/IP protocol stack, various routing protocols (e.g., OSPF, BGP), switching technologies (e.g., STP, VLAN), and network security principles (e.g., VPNs, segmentation, access control)., • Demonstrated ability to diagnose and resolve complex network performance and connectivity issues efficiently., • Strong learning ability, communication and coordination skills, and a service-oriented mindset; detail-oriented and capable of producing high-quality documentation and verbal communication., • Good project management skills and can work under pressure, managing multiple tasks and projects concurrently., • Good cross-departmental communication skills, able to coordinate with multiple departments and cross-functional teams to address complex network issues collaboratively., • Professional certifications such as CCNP or CCIE are preferred., • Perform additional responsibilities as needed to support business objectives. RESPONSIBILITIES:, • Planning, design, and implementation of the overall company network architecture., • Planning, design, and management of data center facilities., • Responsible for network improvements, optimization design, and IT network standardization initiatives based on business requirements., • Responsible for network architecture design and evaluation required for the deployment of application systems in the factory., • Proactively monitor network health and performance, identifying and addressing potential issues before they impact operations., • Analyze, diagnose, and resolve complex network and security incidents in a timely and effective manner., • Lead and contribute to networking projects from conception to completion., • Cross-departmental communication and collaboration with various IT and business units. Foxconn Assembly, LLC is an Equal Opportunity Employer (EOE). All qualified candidates will receive consideration without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, or marital status in accordance with applicable federal, state and local laws. Foxconn Assembly, LLC participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Powered by JazzHR 7bZj1G2kvK

Job Description HOODZ is the largest and leading commercial kitchen exhaust cleaning company in our industry. We are currently hiring for our technician crew member position which does not require experience. We provide paid, on-the-job training. Our territory covers the San Francisco and West San Jose area. As a Technician for HOODZ, your job responsibilities will include: • Degreasing and polishing restaurant exhaust and ventilation systems, from the kitchen to the roof, approaching work with a safety-first mindset., • Setting up the job sites as per HOODZ standards., • Power washing and cleaning the HOODZ way with specialized, state-of-the-art tools and techniques., • Inventorying, stocking, loading, and unloading vehicles., • Satisfying, independent work with no bosses or customers to continuously deal with. We work off-hours at night in our customers' facilities. Once your training is complete, we trust our teams to perform at a professional and expert level, with little supervision., • Driving work vehicles to clients’ facilities. Why join the HOODZ team? • Stability and consistency. We work night shifts, when restaurants are closed, so that you can enjoy work-life balance or manage other responsibilities., • Learn a new trade and get paid for it. That’s right - no experience necessary! We’ll give you the training and tools you need so that you can be successful and grow your career. However, previous mechanical, electrical, construction, or fire safety experience can be a plus., • We’ll take care of you. Build a career. We want you to thrive and realize your potential at HOODZ, which is why we will work with you to fulfill your ambitions. Whether you want to grow in your role as a Cleaning Technician, or transition into sales/management, we will do what we can to keep you challenged, productive, and happy., • Protect lives and keep your community safe. Your job prevents fires and is necessary for keeping kitchens clean and people safe. This role might be for you if you have... • Availability to work shifts overnight Sunday through Thursday, • A valid driver’s license and safe driving record, • Interest in hands-on, active, technical and mechanical work, • Ability to pass initial and ongoing background & drug screens, • Ability to lift/carry up to 50 lbs.

Job Description Job Summary: We are seeking a highly organized and detail-oriented Project Administrator to join our team. The Project Administrator will be responsible for providing administrative support to ensure the smooth operation of projects. This role requires excellent organizational skills, attention to detail, and the ability to multitask effectively. Duties: • Assist in the coordination and management of project activities, • Prepare and distribute project-related documents, reports, and correspondence, • Maintain project files and documentation, • Schedule meetings and appointments, and coordinate project-related events, • Monitor project timelines and deadlines, • Communicate with team members and stakeholders to ensure project progress, • Provide administrative support to project managers as needed, • Perform general clerical duties such as filing, typing, and data entry Requirements Skills: • Previous experience in a construction, industrial, manufacturing or similar environment is preferred, • Strong clerical skills with proficiency in file management and organization, • Excellent customer service skills with the ability to communicate effectively with clients and team members, • Proficient in office management software and phone systems, • Detail-oriented with strong problem-solving abilities, • Ability to multitask and prioritize tasks effectively Additional Info: Duration: 6-8+ Month Contract Target Hours - 7:00 am - 3:30 pm Job Type: Contract

Job Description We have an immediate need for an Senior Biologist in the Santa Clara and Fremont areas. This position requires oversight and implementation of biological, archaeological, and safety compliance on the jobsite. Position is a long-term part-time position, two full days per week. Duties and Responsibilities • Responsible for reviewing project documents and evaluating requirements, • Review and document if any protect bird species, nests, and buffers are present, • Conduct daily field inspections to ensure all compliance is met, • Responsible for submitting daily inspection reports along with required photos to stakeholders, • Ability to conduct training providing daily environmental updates, • Have a clear understanding and coordinate with construction team determining the planned work activity along with any construction change orders, • May attend construction meetings as required Education and Experience • Bachelor’s Degree in Biology, Environmental Science, Ecology, Anthropology, Archaeology or related field, • 7 plus of relevant experience or demonstrated equivalency of experience and/or education, • Experience conducting construction compliance monitoring along with demonstrated experience evaluating habitat suitability and identifying special-status wildlife in the Bay Area, • Knowledge and ability to identify general native and non-native plant and animal species, • Clear understanding of state and federal laws regarding the protection of species and habitats, • Knowledge of permit application requirements, • Excellent communication skills with detailed documentation with exceptional organizational skills, • Proficiency with Microsoft Office to include Excel, • Valid US Driver’s license required Compensation based on experience (Environmental, Compliance, Monitor, Biology, Archaeologist, Ecology, Construction, Field, Species, Habitat) Company DescriptionAbout us: 347 Group, Inc. provides staffing resources to a variety of industries. We have an experienced team of staffing professionals and provide a wide range of services to our clients. Visit our website us:\r\n\r\n347 Group, Inc. provides staffing resources to a variety of industries. We have an experienced team of staffing professionals and provide a wide range of services to our clients. Visit our website .

Job Description Join our team and experience all that Robert A. Bothman Construction has to offer! It's fun to work at a company where people take pride and truly believe in what they're doing. At Bothman, we're committed to bringing passion and superior customer focus to all of our innovative construction projects. Although we work hard, and we're serious about what we do - we care deeply about our employees and like to have a good time too. In fact, our core principal is Quality People and Quality Projects TM. Here’s a glimpse of some of the coolest projects we’ve worked on: Avaya Stadium (Home to the San Jose Earthquakes), the Mountain Winery in Saratoga, San Jose State University Event Center, Cupertino City Center Park, the Haunted House at the Santa Cruz Beach Boardwalk and the Guadalupe River Park to name a few. If a career at Bothman Construction sounds interesting to you, please read on! We are seeking an experienced Take-off Engineer to perform miscellaneous estimating duties to assist estimating staff in preparation of project estimates. Responsibilities: General responsibilities include, but are not limited to: • Perform quantity take-offs and manage scope and statements., • Attend estimating meetings., • Assist with affirmative action good faith efforts as required., • Make phone calls as required to obtain bidding status of Primes and subcontractors prior to bid day., • Meet with project owners and/or Senior Estimators to review job conditions for private estimates., • Solicit sub-contractor and material pricing and copy/send bid information as required., • Assist staff in determining equipment needs, solicit pricing, and calculating labor estimates., • Attend pre-bid meetings., • Assist in review of subcontractor quotes prior to bid., • Assist Coordinator with bid day preparation, delivering bids, and posting bid results and communicating results to subcontractors as necessary., • Assist with sub-contractor and supplier database management., • Assist with updating material and subcontractor sources., • Attend in-house pre-construction meetings, seminars, and training programs., • Enhance relationships with customers and manufacturer-suppliers, • Industry experience in public works, school construction and track and sport field construction, • BS or BA degree preferably in Civil Engineering or Construction Management from an accredited college., • Minimum two years’ experience in Earthwork, Concrete and Utility takeoff., • Computer literate in Excel, Word, Microsoft Project, AGTEK., • Basic understanding of AutoCAD., • Ability to work in pressure environment and to meet deadlines., • Strong communication skills both written and verbal., • Knowledge in the general construction industry., • Possession of a valid Driver’s License., • Ability to work independently, as well as within a team, • Performance of the required duties will require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and negotiate work areas under construction, • Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus, • Performing this job requires use of hands to finger, handle, or feel objects, tools or controls, sit, talk and hear, stand, climb, balance, stoop, kneel, crouch or crawl, • Occasionally lift and/or move up to 75 pounds. Robert A. Bothman Construction is a full-service, family-owned construction and general engineering company with offices in California and Hawaii. Founded in 1978, we are a recognized industry leader offering a full complement of pre-construction and construction services for public, commercial, industrial, and privately owned projects. Our expertise covers a wide range of construction and general engineering specialties including Sports & Recreational Facilities, Educational Facilities, Site Development & Heavy Engineering, Structural & Architectural Concrete, Solar & Renewable Energy, Stormwater Management, and RABcrete TM Pervious Concrete. We believe in providing exceptional value and service to all of our clients and believe that dedication and hard work is the key to unlocking our continued growth and success. Our headquarters are located in Santa Clara, California. The office for this position will be in Roseville, California.Robert A. Bothman provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Robert A. Bothman complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. We strongly encourage women, minorities, individuals with disabilities, and veterans to apply to all of our job openings.\r\n\r\nRobert A. Bothman Construction is a full-service, family-owned construction and general engineering company with offices in California and Hawaii. Founded in 1978, we are a recognized industry leader offering a full complement of pre-construction and construction services for public, commercial, industrial, and privately owned projects. Our expertise covers a wide range of construction and general engineering specialties including Sports & Recreational Facilities, Educational Facilities, Site Development & Heavy Engineering, Structural & Architectural Concrete, Solar & Renewable Energy, Stormwater Management, and RABcrete TM Pervious Concrete. We believe in providing exceptional value and service to all of our clients and believe that dedication and hard work is the key to unlocking our continued growth and success.\r\n\r\nOur headquarters are located in Santa Clara, California. The office for this position will be in Roseville, California.

Job Description:\n\nDescription: Job Req for Construction Manager San Jose, California Period of Performance October 1, 2024 through February 1, 2025 Construction Management Services (CM) Record Keeping and Progress Report / Project Files The CMa will set up job files, working folders, and record keeping systems to be used on this project. The CMa will update and complete the Inspection Plan to fit complete contract requirements in detail as directed by the CO/COR. The CMa is responsible for documenting all the major project actions, contract modifications, claims, submittals, etc. The project files must be well organized. The CMa files shall include sections for: General Correspondence (CMa-GC) Administrative Correspondence GSA Correspondence Correspondence with A/E Inspection Reports Defects and Omissions Lists Submittals Organized by Specific Section and Submittal Logs Wage Interviews Commissioning Reports Change Order Documents (Requests for Proposals), SF2437 Finding of Facts, Scope of work, Independent Estimates, GC Proposals, Technical Analysis and Negotiation Memorandum. Shop Drawings, Catalog Cuts Job Meetings with Sign-In Sheets Requests for Information (RFI) RFI with GSA or A/E Response and RFI Logs Payments Scheduling Oversight The CMa shall review the construction schedules submitted by the GC’s and make recommendations for acceptance, revision, or rejection by the GSA Contracting Officer (CO). The CMa shall verify that each activity is reasonably priced, that the schedule is not front-end loaded, and that the workflow is logical, efficient, and not contrived to neither unfairly benefit the Contractor nor jeopardize the Government. The CMa shall be overseeing the progress achieved by the GC and compare the actual progress to the master project schedule. The CMa must be continuously aware of the status of each actual project progress as compared to the planned progress. The oversight by CMa should take into consideration of progress payments, receipt of submittals, phasing, or any other sensitive activities. The CMa shall annotate the progress schedule monthly showing actual progress achieved and any adverse delays. The CMa shall anticipate delays and advise GSA when problems are predicted. The CMa shall highlight such matters in the weekly construction meetings. Submittals The CMa is responsible for coordinating submittals from receipt through approval and for returning them to the GC. The CMa shall review the submittal schedule, as developed by the GC, for reasonableness. The CMa should review the submittal package for completeness and compliance with the specification prior to forwarding on the the A/E team for review. The CMa shall monitor the GC’s submittal progress, reminding the GC of pending and delinquent submittals. If submittals are not being submitted or reviewed in a timely manner by the GC, the CMa shall notify GSA. The CMa’s submittal monitoring system should include as a minimum: The CMa is responsible for coordinating the submittals from their receipt through to their approval and return to the GC. The CMa will monitor the time of submission and the processing of shop drawings, samples and other separate Contractor submittals. If submittals are not being received in a timely manner, the CMa shall ascertain the reason therefore and take action as deemed appropriate to eliminate lags and delays. The CMa shall notify the CO promptly of any delays of the Contractor. The CMa will ensure that all submittals are submitted and approved in sufficient time to preclude delaying project completion. Progress Payments The CMa shall assist GSA in processing payments by reviewing the GC’s payment invoices and recommending to the GSA project manager the correct payment amount. The CMa shall work with the GC before the invoice is prepared, so that both parties agree on the amount of work completed and the correct amount of the invoice. Actual approval of the payment amount shall be made by the GSA CO. The CMa shall follow GSA’s procedure for progress payment review and processing, including ensuring the GC’s adherence to FAR Clauses 52.232-5, Payments Under Fixed-Price Construction Contracts (May 2014), and 52.232-27, Prompt Payment for Construction Contracts (May 2014). The CMa shall also review the GC’s Schedule of Values (SOV) to ensure that the information is correct and that the SOV is not front- loaded. The CMa is responsible for reviewing the GC’s proposed SOV at the beginning of the project and for making recommendations to GSA concerning revisions and/or acceptance. The CMa shall also verify that there is an appropriate line item with funding for project closeout since GSA does not typically hold retainage on invoices. Safety The CMa shall become familiar with the provisions of the Public Buildings Service (PBS) Handbook No. PBS P 5900.2C, Safety and Environmental Management Program. During the course of construction, the CMa shall monitor the GC’s conformance to the project safety plan. The CMa shall advise the GC immediately of any safety hazards observed. IF the remedy to a safety hazard is not apparent, the CMa may assist the GC in developing a corrective action plan. The CMa shall maintain a file of all accident and fire safety reports generated by the GC. Accident and Fire Reporting: In the event of an accident or fire, the GC, the CMa, or others familiar with the circumstances will be required to prepared and submit to GSA: GSA Form 3090, Accident Investigation Report GSA Form 53, Fire Accident Report Inspection The CMa shall be responsible for the inspection of all worked performed by the GC and for promptly notifying the GC, and the GSA CO of any discrepancies. The CMa shall plan and coordinate inspections with the GC in a manner that minimized impacts on construction operations and shall confirm that critical inspections occur as required. Inspections of critical activities may require that the GC notify the CMa and GSA in advance of certain operations. The CMa shall document and record each inspection either in a stand-alone inspection report, or within the CMa daily report. Testing The CMa must be aware of all construction elements or activities that require tests, as reflected in the construction contract. The CMa’s testing responsibilities include, but are not limited to: Verifying that tests are being conducted as scheduled Witnessing all tests to confirm that proper testing procedures are followed Monitoring test results for acceptability Retaining records of tests and results Documenting testing activities Notifying GSA of test failures and of planned correction and retesting Overseeing corrective measures arising from test failures The CMa will be held responsible for costs for retests that are not necessitated by the CMa’s failure to witness required tests. Requests for Information The CMa is responsible for coordinating RFI’s between GSA and the GC The CMa shall develop and coordinate a procedure for tracking RFIs so that all parties understand and agree to their roles and responsibilities. The CMa reviews RFIs and determines whether a response can be drafted based on a review of the contract documents. The CMa may refer the RFI to the A/Es for technical clarifications or to GSA for clarifications of general conditions. The CMa shall also assist in providing responses to RFIs related to general conditions. All RFIs relating to fire protection shall be routed to the A/E and the GSA fire protection engineers for review and response. The CMa shall develop procedures to notify all parties (the GC and GSA) of RFI responses, fully document all RFI responses, and confirm that all parties agree with the contract interpretation. The CMa shall review all RFI responses to determine whether the response will result in a change order to the GC contract. If the RFI will result in a change order to the GC contract, the CMa shall notify the GSA CO and COR to coordinate the proper response. Contract Modifications The CMa shall assist the CO in administration of changes to construction contracts. The CMa must not take any action that commits the Government to funds and should avoid any instruction to the contractor that could be interpreted as authorizing modifications to the contract. All modifications to the contract must be processed as formal contract modifications by the GSA CO. The GSA CO has the sole authority for authorizing contract modifications. a. Change Order Requests: The CMa shall evaluate all potential modifications to determine whether they are justified and within the scope of the GC contract, consulting as necessary with the Design-Bid-Build team on technical issues or with the GSA general conditions. The CMa may also assist in developing customer driven changes to the SOW. b. Requests for Proposals: If the CMa find a change order request justifiable, the CMa shall prepare a request for a change order proposal from the GC for signature by both the CO and COR. The CMa will be required to prepare a written description of the scope of the change. c. Design Deficiencies: If the reason for a change appears to be a design deficiency, the CMa should make an initial assessment of the Design-Bid-Builds’ Team liability, including documentation of the deficiency. The CMa’s assessment of the Design-Bid-Build’s Team liability will be based on a review of the contract documents and other circumstances leading to the change. The GC shall be given an opportunity to rebut any determinations of apparent design deficiencies. The GC’s position on the deficiency shall be provided to the GSA CO and the COR with the proposed contract modification. GSA shall make the final decision on liability and also on whether to pursue recovery from the GC. d. Estimates: The CMa shall prepare an independent estimate of the change and the GC’s subcontractors’ overhead and profit. The contract has all rates, prepare estimate based on these rates. The estimate shall include a detailed breakdown of labor, material, and equipment costs for the various work elements. Markups for overhead and profit, as allowed by the GC contract, will be shown separately. The estimate must be signed and dated by the preparer. The absolute sum of all cost components in a modification (additions and deductions) will determine the GSA internal approval process required for the cost estimate before acceptance by the GSA CO. The Government estimate is to be prepared before receipt of, and independent of, the GC’s proposal. e. Price-to-be-Determined-Later (PDL) Modifications: Some modifications must be expedited in order to avoid delaying construction or increasing costs excessively. In such cases, the modifications may be processed as a PDL. The GSA CO will decide if circumstances warrant expedited PDL procedures. f. CO Directed Change Orders: FAR Clause 52.243-4, Changes, authorizes a CO to issue a written order to the contract unilaterally directing changes in the work, within the general scope of the GC contract; including changes in the specifications or drawings, in the method of performance, in Government furnished facilities or equipment, in materials, in services, in site, or in directing acceleration of the performance of the work. g. Negotiations: The CMa shall determine if a change will potentially extend or shorten the specified construction completion date; include an estimate of appropriate time extension for all change orders; the CMa shall review all proposals received from the GC and develop a technical analysis. The technical analysis is an in-depth evaluation of the GC’s proposal, especially as it compares to the Government Estimate. It identifies questionable costs; excessive unit costs; differences in scope, quantities, or markups; and suggests negotiation strategies; the CMa shall assist the GSA CO/COR in establishing negotiation strategies, including negotiation cost targets or range and in negotiating contract modifications with the GC. The initial analysis should provide recommendation for acceptance or recommendations for negotiations, identifying specific negotiation objectives and cost targets or range. The CMa will support the CO/COR in the negotiations, being most familiar with the field conditions generating the change and having prepared or reviewed the IGE and having prepared a technical analysis that compares the IGE to the GC’s change order proposal. GSA will provide necessary on site representation to avoid impact on change order procedures with reasonable notice and/or scheduling. h. Documentation: After negotiating a firm-fixed prices, the CMa shall assist GSA by preparing a revised Technical Analysis based on the final negotiated amount. Progress Photographs The CMa shall photograph any work that will become hidden or covered up during the course of construction. Photos shall be labeled to indicate the project, the date taken, and what is being shown. Prior to the commencement of construction, the CMa shall photograph all existing areas surrounding the construction area that may become damaged during construction in order to provide a record of the conditions at the start of the work. Project Closeout – Final Inspection, Substantial Completion, and Final Completion The CMa shall schedule and coordinate the Final Inspection and punch list with GSA, the architect of record, and the FBI. The CMa shall have a running list of Defects and Omissions (DOs) that can be combined with the DOs identified in the Final Inspection. The CMa transmits the preliminary DO list (also referred to as the Punch List) to the GC and GSA. The CMa shall closely monitor the corrective work and update the list of DO, signing off each deficiency as it is corrected. The CMa shall prepare a project specific checklist of the items contractually required before the contract can be considered ready for settlement. The CMa shall assist the GSA CO to determine when all contractual obligations are met, and the project is ready for final completion and acceptance. Meetings and Coordination The CMa shall chair design meetings, progress meeting, coordination meetings, and required project meetings as soon as the CMa is on board through final closeout of all construction activity. The CMa shall produce and distribute meeting minutes within three (3) business days of the meeting. The CMa Shall schedule and chair coordination meetings as required to ensure construction activities. The CMa shall provide both informal and formal coordination meetings with the parties on site. As Built Drawings Verify the accuracy and completeness of all as-built drawings and ensure the contractor maintains and updates the drawings on a regular basis and include all actual locations and routings of services, all changes from the original documents, filed changes, final details, actual dimensions and other similar items on the drawings. The CMa and the construction contractor will work collaboratively to ensure that as-built and other “Controlled Unclassif

Job Description Join our team and experience all that Robert A. Bothman Construction has to offer! It's fun to work at a company where people take pride and truly believe in what they're doing. At Bothman, we're committed to bringing passion and superior customer focus to all of our innovative construction projects. Although we work hard, and we're serious about what we do - we care deeply about our employees and like to have a good time too. In fact, our core principal is Quality People and Quality Projects TM. Here’s a glimpse of some of the coolest projects we’ve worked on: Avaya Stadium (Home to the San Jose Earthquakes), the Mountain Winery in Saratoga, San Jose State University Event Center, Cupertino City Center Park, the Haunted House at the Santa Cruz Beach Boardwalk and the Guadalupe River Park to name a few. If a career at Bothman Construction sounds interesting to you, please read on! Job Description: We are seeking a Construction Yard Coordinator, who will be responsible for maintaining a clean, efficient Warehouse and assisting with distribution of tools and construction materials. General responsibilities include, but are not limited to: • Assist in operating the yard and warehouse and assist in dispatching materials and tools accordingly., • Record daily log of tools, material and equipment going in and out of the yard., • Perform janitorial service in Warehouse and Construction Office, • Clean and maintain construction equipment, tools, and vehicles Preferred Qualifications • Minimum 1 year construction experience, 2 years preferred., • Bilingual – English and Spanish., • Minimum high school diploma, college degree preferred., • Knowledge and experience in the concrete construction industry., • Computer literate in Excel, Word, and Microsoft Project., • Strong communication skills both written and verbal., • Must possess a valid CA Driver’s LicenseCompany DescriptionRobert A. Bothman provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Robert A. Bothman complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. We strongly encourage women, minorities, individuals with disabilities, and veterans to apply to all of our job openings. Robert A. Bothman Construction is a full-service, family-owned construction and general engineering company with offices in California and Hawaii. Founded in 1978, we are a recognized industry leader offering a full complement of pre-construction and construction services for public, commercial, industrial, and privately owned projects. Our expertise covers a wide range of construction and general engineering specialties including Sports & Recreational Facilities, Educational Facilities, Site Development & Heavy Engineering, Structural & Architectural Concrete, Solar & Renewable Energy, Stormwater Management, and RABcrete TM Pervious Concrete. We believe in providing exceptional value and service to all of our clients and believe that dedication and hard work is the key to unlocking our continued growth and success. Our headquarters are located in Santa Clara, California. The office for this position will be in Roseville, California.Robert A. Bothman provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Robert A. Bothman complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. We strongly encourage women, minorities, individuals with disabilities, and veterans to apply to all of our job openings.\r\n\r\nRobert A. Bothman Construction is a full-service, family-owned construction and general engineering company with offices in California and Hawaii. Founded in 1978, we are a recognized industry leader offering a full complement of pre-construction and construction services for public, commercial, industrial, and privately owned projects. Our expertise covers a wide range of construction and general engineering specialties including Sports & Recreational Facilities, Educational Facilities, Site Development & Heavy Engineering, Structural & Architectural Concrete, Solar & Renewable Energy, Stormwater Management, and RABcrete TM Pervious Concrete. We believe in providing exceptional value and service to all of our clients and believe that dedication and hard work is the key to unlocking our continued growth and success.\r\n\r\nOur headquarters are located in Santa Clara, California. The office for this position will be in Roseville, California.

Job Description Antora builds and deploys thermal energy storage to power always-on industrial operations and data centers with low-cost energy. Factory-built in California, Antora's thermal batteries deliver reliable and cost-effective heat and power for industrial loads of any size. Antora is electrifying global industry while supporting U.S. manufacturing jobs, lowering costs for energy consumers, and enhancing the competitiveness of American industry. We are growing our company with people who put team and mission first, value connection through laughter and joy, and build with humility and openness. We are committed to continue building a diverse, passionate, and creative team dedicated to a future where every industrial facility, everywhere on earth, is powered by abundant, clean, low-cost energy. Position Summary Antora Energy is hiring a Manager of Facilities and Equipment to be the internal owner of our facilities, capital equipment, and physical operating environment across multiple Bay Area sites. This is a hands-on leadership role: leading multi-site planning, capital project delivery, and EHS compliance while directly improving site readiness, equipment uptime, and safety. The Manager partners with Operations, Manufacturing Engineering, R&D, EHS, IT, and Security — and with external OEMs, riggers, contractors, and rental vendors — and will lead the evolution of Antora's facilities function from contractor-supported toward internally led as the company scales. Roles & Responsibilities Facilities Leadership & Strategy • Serve as the primary internal owner of facilities, capital equipment, and infrastructure across all Antora environments; lead planning, budgeting, and capital roadmapping., • Establish policies and standards (PM, change management, vendor onboarding, safety), manage internal facilities technicians and external contractors, • Participate in lease negotiations for new and existing San Jose area facilities. Ensure facilities activities are in compliance with lease terms.Site Operations & Infrastructure, • Own infrastructure across electrical (208V/480V), HVAC, exhaust, process gases (N2, compressed air), DI/distilled water and cooling loops, and wastewater., • Run preventative maintenance (PM) and reliability programs across all sites; maintain site diagrams, equipment registers, and asset inventories., • Diagnose and repair basic issues with capital and building infrastructure equipment. Maintain an adequate stock of equipment spares., • Monitor facilities resource usage (Utilities, propane, nitrogen, etc): suggest upgrades to meet cost targets and ensure facilities meet operational requirements. Capital Equipment & Project Execution, • Own installation, relocation, and commissioning of capital equipment — including but not limited to CNC mills, coat tracks, fume hoods, evaporators, HF benches, dicing tools, cranes, hoists, and material-handling equipment., • Lead site-prep and tie-ins (concrete, anchoring, power and gas drops, exhaust, cooling water); run capital projects on scope, schedule, and budget.Permitting, EHS & Compliance, • Support EHS with facility-level compliance with BAAQMD air permits, Silicon Valley hazardous materials, wastewater discharge, and building/fire/life-safety codes; manage relationships with city inspectors and Authorities Having Jurisdiction (AHJs)., • Partner with EHS to enforce safety standards (LOTO, machine guarding, gas detection) and lead corrective action on facility and equipment safety issues.Material Handling, Security & Workplace Systems, • Own the material handling fleet (forklifts, telehandlers, lifts, cranes, hoists, tuggers) and rental relationships; ensure operator certifications and PMs are current., • Own physical security and access control (badging, visitor parking, CCTV, alarms, fencing), • Partner on facilities related workplace ticketing workflows.Cross-Functional Collaboration, • Partner with Manufacturing Engineering and R&D to align facility readiness with EVT/DVT builds and production ramps;, • Partner with IT on site networks and AV infrastructure installations., • Partner with Business Operations to provide input on building cleanliness/janitorial services for all facilities; support office space buildout; support insurance inspections/visits and diligence, monitoring and benchmarking of ESG (Environmental Social Governance).Initial Success Metrics (First 6–9 Months), • Antora can clearly explain and defend its facilities footprint, utility capacity, and equipment register to auditors, investors, and AHJs., • Accurate site diagrams, equipment lists, and PM schedules are in place across all sites., • Open permits, expirations, and pending inspections are continuously visible; no equipment is held up by permit gaps., • Capital equipment installs land on schedule and budget, with documented commissioning and acceptance., • Site uptime, safety incident trends, and corrective actions are tracked and reviewed monthly with leadership.Key Qualifications, • Bachelor's degree in Engineering, Facilities/Construction Management, or a related discipline (or equivalent experience)., • 8–10 years of progressive facilities, capital equipment, or plant engineering experience, including 2+ years leading a team., • Multi-site facilities and equipment management experience in a hardware, manufacturing, semiconductor, biotech, or heavy-R&D environment., • Strong working knowledge of industrial electrical (208V/480V), process gases, HVAC, cooling water/chillers, and wastewater systems., • Experience leading capital equipment installation end-to-end and navigating Bay Area permitting (BAAQMD, SV Haz Mat, local building/fire) or equivalent., • Genuine enthusiasm for AI tools and willingness to lean into AI-driven facilities and asset management solutions.Additional Qualifications Desired, • Hands-on familiarity with semiconductor, cleanroom, or thermal/energy tooling (e.g., coat tracks, evaporators, dicing tools, HF benches, fume hoods)., • Experience implementing CMMS / asset management programs and preparing facilities for audits or investor due-diligence., • Professional certifications such as PE, CFM, FMP, SFP, or equivalent.Personal Attributes, • Structured thinker who documents systems and builds scalable, repeatable processes., • Pragmatic problem solver who balances safety and compliance rigor with operational speed., • Calm under pressure — the go-to person when something critical breaks. Work Location: Onsite - San Jose, CA Salary Range: $142,000 USD - $170,000 USD Salary Basis: Annual Please note that the salary range listed above reflects Antora Energy's estimated pay for this position. The actual salary offered will be within the posted range and determined based on several factors including but not limited to a candidate's experiences, credentials and expertise, as they pertain to the position's requirements. In addition to a competitive base salary, Antora Energy's Total Rewards program includes equity compensation in the form of stock options, a premium health benefits package with life and disability insurance, a 401K plan with employer contributions, flexible spending accounts, and an industry leading paid-time-off policy that features flexible and inclusive holiday observance, as well as paid volunteer time off. #LI-Onsite When it comes to stopping climate change, we need everyone. We believe that having a diversity of backgrounds and experiences strengthens all of us, and we strive to create an environment where every one of us is empowered to create meaningful change.

Job DescriptionSalary: $90,000.00 - $120,000.00 Who we are: Aro Homes is a thriving, purpose-driven company on a mission to redefine residential construction. Aro Homes was founded to create well designed, precision engineered homes that are beautiful, livable, and durable, while being built multiple times faster and having a positive impact on the environment. We are a diverse and experienced group of passionate and curious designers, builders, engineers, product developers, and businesspeople who are passionate about and committed to delivering on our mission. Weve demonstrated there is a massive opportunity to reduce waste and improve sustainability while building homes in a fraction of the time it takes traditionally. We utilize a repeatable, multi-disciplinary, and product-driven approach which is unique in the industry. We are funded by world-class investors who care about transforming industries for the better, including Eric Schmidts Innovation Endeavors. If you share the desire to leave a lasting positive impact on the world and to join a strong culture of intelligent, passionate people, then lets start a conversation. What you will be responsible for: Aro Homes is seeking a dynamic leader and construction management professional with an understanding of systems and procedures to support our site operations as a Development Manager. Aro Homes single family infill projects are located primarily in Mountain View and the surrounding Peninsula. This role reports to the Director of Project Development and is responsible for driving the end-to-end process for getting projects ready for construction as efficiently and quickly as possible. This mission critical role will own driving efficient entitlement and utility planning including project feasibility and assessment, management of third-party consultants, pre-construction activity, plan checking and obtaining state, city and county approvals for all development activity. What Youll Do: • Successfully plan and complete all land development activities on a portfolio of lots including site due diligence, project budgeting and feasibility, and coordinating permit submission and revision., • Develop and control the projects land development and permitting schedules and coordinate workflows and critical path schedule to accelerate project cycle times., • Conduct site assessments and define land development costs in collaboration with the Acquisitions and Site Operations teams., • Build positive relationships with neighbors and the community and build and maintain strong working relationships with the municipalities in which we operate., • Build strong communications and relationships with relevant third parties including arborists, surveyors, civil engineers, etc., • Pick up corrections, submit them to the Planning/Engineering Department and re-submit the corrected plans to municipalities.Build and maintain strong working relationships with the planning and building departments in the towns in which we operate., • Work closely with Utilities to expedite and streamline the disconnect and reconnect of all required utilities., • Secure permits for demolition activities including all required plans, permits and notices., • Obtain temporary power pole permit and inspections, • Provide administrative support to department as directed by manager., • Manage and pay all required Impact and Development Fees in preparation of Building Permit issuance., • Anticipate and solve problems while always seeking to drive continuous process improvements. Skills & Qualifications: • Process driven approach with a strong attention to detail., • Excellent communicator across mediums., • Facilitate using project management software Smartsheet, Oracle Primavera Cloud, etc., • Strong interpersonal skills is a must; the build and maintains strong working relationships with customers, co-workers, trade partners and plan reviewers., • 3-5 years' experience in residential in fill development., • Ability to assess and make decisions about site specific conditions landscaping, civil, trees, soil, etc., • Degree in Engineering, Architecture, Construction Management/related field or equivalent experience desired., • Valid drivers license and a good driving record., • Strong internal drive & motivation, Bias for Action, and growth mindset., • Employment will be contingent upon successful completion of our DMV/background check. What we offer: • Opportunity to join an outstanding start-up team and grow a purpose driven company from the ground up., • Competitive salary package., • Medical/dental/vision benefits.

Job DescriptionAbout MGE MGE Underground is a rapidly growing utility infrastructure contractor serving utility companies from our Paso Robles headquarters and regional hubs throughout California. Our mission is to support our clients’ expanding utility and infrastructure requirements by positioning MGE as the leading provider of innovative construction solutions at the best value. Our Core Values Safety | Continuous Development | Respect | Integrity | Performance | Trust | Fun How You Can Make an Impact The Administrative Assistant will provide general support for the Project Management Department as well as project-specific related tasks. Responsibilities will include managing schedules, data entry, and preparing and managing project documentation. This position will work closely with all team members and collaborate with various departments across the organization, and must have a strong desire to be proactive and create a positive experience for others. How You Will Contribute • Provide administrative support for all areas within the Project Management department., • Maintain a well-stocked supply inventory, place and expedite orders, verify receipts, and submit to accounts payable., • Assist with Work in Progress (WIP) reporting., • Maintain and submit schedules to appropriate clients., • Update necessary tracking systems to ensure the project and program status is maintained with complete accuracy., • Work with the project management team to facilitate and track project information and closeout documentation., • Proficient in Microsoft Office Suite, • Excellent time management skills and attention to detail, • Excellent written and verbal communication skills, • Strong organizational and planning skills, • Required: High School Diploma or GED equivalent, • Desired: Associate degree in related field, • Preferred: 1 year of verifiable administrative or assistant experience Above and Beyond Benefits • Medical, dental, vision, and life insurance., • 401K, • Vacation accruals for all non-exempt employees in addition to ten paid company holidays., • Multiple monitors, standing desks, and other ergonomic equipment to match your work style., • Monthly birthday celebrations, team lunches, company-wide employee recognition events, and other employee engagement opportunities., • Employer-sponsored learning/career development opportunities and conferences/seminars. Affirmative Action/EEO MGE Underground is an equal opportunity employer and does not discriminate based on any protected characteristics. Pre-Employment and Physical Requirements Successful applicants must pass a drug screen and background check before beginning employment. This role may require sitting at a desk and working on a computer for a prolonged period of time. You must be able to lift up to 15 pounds at a time. * *Reasonable accommodation may be made to enable individuals with disabilities to perform these essential functions. Other Duties Your duties and responsibilities may change at any time, with or without notice, based on the company’s needs. Powered by JazzHR vaNtIiWhcg

Job Description VP / Director – Commercial Credit Administration San Jose, CA (Hybrid) The Role (What This Job Actually Is) This is not a back-office credit role. You're stepping into a senior credit seat that sits in the middle of the action—working directly with experienced commercial bankers to structure, challenge, and ultimately get deals done the right way. You'll be the right hand to the Senior Credit Officer, helping scale a growing commercial platform while bringing greater consistency, creativity, and judgment to how credit decisions are made. This role exists because the organization is evolving—new products, more complexity, more deal flow—and needs someone who can bridge production and credit without being a roadblock. What They're Really Looking For This is a fit-and-experience hire, not a checklist hire. The right person has likely: • Come up through commercial banking (RM, underwriting, or loan team) and understand how deals actually get won, • Transitioned into credit approval/credit admin leadership, • Seen the full lifecycle of a deal—origination, structuring, approval, and workout What You'll Actually Do • Approve and structure commercial credits across CRE, C&I, construction, SBA, and participation deals, • Act as a true partner to senior bankers—pressure-test deals without killing momentum, • Help evolve credit policy, risk framework, and approval processes as the platform grows, • Work closely with the SCO to prioritize, vet, and move deals efficiently, • Support and influence loan participations and external bank relationships, • Oversee or contribute to special assets strategy and loss mitigation (less of a workout shop, more proactive risk management), • Play a role in building out a small business / lower middle market credit strategy, including fintech-enabled channels, • Credit is expected to be creative & constructive, not defensive, • You'll be working with strong, experienced commercial bankers—this is a peer-level seat, not oversight from a distance, • The organization is actively exploring:, • New participation strategies, • Fintech partnerships, • Technology-enabled small business lending channels You don't need to check every box—but if this doesn't sound like you, it's probably not the right seat: • 10–15ish years in commercial banking/credit with increasing authority, • Background that includes:, • Credit approval authority, • Deep underwriting across multiple asset classes, • Exposure to policy, risk rating, and portfolio management, • Ideally have:, • Experience as an RM or close partnership with RMs, • Ability to structure deals creatively, not just approve/decline, • Comfortable operating in a gray area environment—building, refining, improving, • Bankers trust you, • You know how to say “yes, but here's how” instead of “no.”, • You can walk into a deal discussion and add value immediately, • Career credit-only profile with no exposure to deal dynamics, • Overly rigid, policy-first mindset This is a succession-oriented hire. The goal is to bring in someone who can: • Grow into larger leadership responsibilities, • Help shape the next phase of the commercial platform This is a builder's credit role inside a growing commercial platform. If you've been stuck in a pure credit lane and want more influence—or you've come from production and want to move into credit without losing the deal mindset—this is one of the better seats in the market.

Job Description Civil Engineer – Water Distribution & Infrastructure Chico, CA (On-Site) | Full-Time | Direct Hire | $113K – $173K + Defined Benefit Pension Relocation assistance available for highly qualified candidates. Remote/hybrid not available. We are partnered with California’s largest regulated water utility to recruit a Civil Engineer – Water Distribution & Infrastructure for their Chico district. This is a permanent, direct-hire role for civil or mechanical engineers with experience in water distribution, potable water, pump station design, pipeline design, or related water infrastructure — seeking real capital project ownership, long-term stability, and one of the last true defined benefit pension plans in private-sector engineering. This is a permanent position supporting the planning, design, and delivery of water infrastructure capital improvement projects (CIP), including potable water distribution systems, wells, pump stations, storage tanks, pipelines, and treatment facilities. Compensation & Benefits • $113K – $173K depending on experience, • Defined benefit pension — guaranteed retirement income; fewer than 20% of private-sector engineers have access to this today, • Union-negotiated annual wage increases with transparent pay bands and employment protections backed by a collective bargaining agreement, • Stable, ratepayer-funded capital budgets — your projects are funded and moving regardless of market conditions, • Growth path within a $1.6B capital investment program (2025–2027): increasing project complexity, mentorship, and a clear ladder toward senior and principal engineer classifications What You’ll Do • Plan, design, and deliver capital improvement projects (CIP) — wells, pump stations, storage tanks, pipelines, pressure tanks, and water treatment facilities (new installations and modifications to existing infrastructure), • Manage projects through the full lifecycle: concept, design, procurement, construction, and closeout — including scope, schedule, budget, and cost tracking, • Oversee construction activities; manage consultants, contractors, change orders, RFIs, inspections, and invoices, • Prepare and review permit applications, bid documents, and technical specifications; communicate with permitting agencies including the Division of Drinking Water (DDW), • Perform hydraulic analysis, engineering calculations, and civil design analysis to solve water system problems, • Prepare and review drawings; work with engineering technicians on standard infrastructure improvements using AutoCAD, Civil 3D, and GIS tools, • Support capital budgeting, cost estimating, and CPUC rate case filings — including project justifications, data requests, and settlement support, • Review easements, legal descriptions, and infrastructure records for proposed water system facilities, • Assist in developing long-term water distribution system plans and potable water supply reliability assessments, • Coordinate with district operations, regulatory agencies (DDW, SWRCB), and public stakeholders, • Conduct project safety planning in accordance with AWWA standards and company safety protocols What We’re Looking For • BS in Civil Engineering or Mechanical Engineering from an ABET-accredited institution (required; no substitutions), • 2+ years of experience in the design and project management of water distribution, potable water, wastewater, oil and gas, or related civil infrastructure — water main design, pump station design, or well construction experience highly valued, • EIT (Engineer-in-Training) required; California PE license strongly preferred — candidates actively pursuing licensure encouraged to apply. Master’s degree or advanced specialty certification a plus, • Hands-on experience with engineering calculations, hydraulic analysis, civil design, and construction management oversight, • Proficiency with AutoCAD, Civil 3D, and/or GIS tools; hydraulic modeling experience (WaterGEMS, EPANET, or equivalent) a plus, • Working knowledge of AWWA standards, Title 22 (California), and applicable water system codes and regulations, • Experience preparing permit submittals and communicating with regulatory agencies (DDW, SWRCB, or equivalent), • Project management fundamentals — scope, schedule, and budget tracking; PMP certification a plus, • Strong technical writing skills for reports, bid specifications, and regulatory filings, • Valid California Driver’s License required About Chico, CA Chico sits at the northern end of the Sacramento Valley — 90 minutes north of Sacramento and within easy day-trip distance of the Bay Area, Lake Tahoe, Napa Valley, and the Northern California coast. That proximity means you maintain access to major airports, professional networks, entertainment, and city amenities — without paying city prices to live there. Chico is built around Chico State University, Bidwell Park (one of the largest municipal parks in the US), and a strong local food, arts, and outdoor culture with year-round hiking, cycling, and access to the Sierra Nevada foothills. Housing costs run roughly 40% below Sacramento and 70% below the Bay Area. For engineers relocating from higher-cost markets, the same compensation buys a materially different quality of life here. Innovation Consulting LLC is an equal opportunity employer. We recruit without regard to race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected characteristic.

Job Description Build Your Career at Foundation Repair of CA Foundation Repair of CA, a leader in the foundation, crawl space, and concrete repair industry, is expanding its outside sales team. We’re on a mission to help more homeowners by delivering a remarkable contractor experience at scale. This position allows you to help homeowners fix and protect their most valuable asset—their home—and strengthen community infrastructure the right way. About the Role As an Outside Sales Representative, you will meet with homeowners through pre-scheduled appointments. Your goal is to uncover the customer’s needs, diagnose foundation or concrete issues, recommend the best repair solutions, and guide them toward making confident, informed buying decisions. Top performers in our industry can earn $200K or more annually while helping provide permanent, creative repair solutions. What We Provide • $700 per month vehicle fuel allowance, • Training base pay during onboarding and business ramp-up period, • High-quality, warm leads — no cold calling, • Dedicated inside sales support to help close sales, • Comprehensive benefits package including medical, dental, vision, and 401(k), • Best-in-class training, including manufacturer-led sessions and cutting-edge software tools • A trusting, respectful, and fun company culture, • A company you’ll be proud to represent — one of the top authorized Supportworks dealers by sales volume, with a 4-star average rating across Yelp, Home Advisor, and Google Reviews • Professional growth opportunities within a growing organization What We’re Looking For • 1+ years of experience in residential real estate, home inspection, construction, concrete, or home improvement industries (preferred but not required) • 2+ years of in-home sales experience (preferred but not required), • Strong listening, closing, follow-up, and self-marketing skills, • Ability to walk, kneel, and crawl in confined spaces, • Valid driver’s license, safe driving record, and ability to obtain a CSLB Home Improvement Salesperson card (background check required) • Reliable personal vehicle for sales appointments, • Proficiency using tablet-based software (training provided), • Comfort and confidence working on a 100% commission-based pay structure Our Purpose Our purpose is to redefine what it means to work with a contractor by creating a truly remarkable experience for every customer. Just as importantly, we walk alongside our team members, redefining what it means to work together as One Team. We care deeply about people — building genuine relationships, supporting one another’s growth, and making lasting connections. For more information, visit: Company DescriptionAt Foundation Repair of CA, we are motivated as "One Team" to redefine the construction industry by pushing beyond the status quo and constantly surpassing new challenges. If you are a natural leader, who likes hard work while maintaining the highest dedication to the customer then apply today and join our team and test your limits as a leader.At Foundation Repair of CA, we are motivated as "One Team" to redefine the construction industry by pushing beyond the status quo and constantly surpassing new challenges. If you are a natural leader, who likes hard work while maintaining the highest dedication to the customer then apply today and join our team and test your limits as a leader.

Job DescriptionSalary: $150,000.00 - $200,000.00 per year Joseph J. Albanese, Inc. is seeking an experienced Sr. Public Works Estimator to join our team in Santa Clara, CA. The Sr. Public Works Estimator's responsibilities include preparing accurate and competitive bids, reviewing project plans and specifications, conducting site visits, and collaborating with clients and suppliers. Voted Best Places to Work for the past 7 years in a row, JJA is a dynamic, fun environment with significant career opportunities to further grow and develop professionally. ESSENTIAL DUTIES & RESPONSIBILITIES: • Prepare detailed and accurate estimates for construction projects, including labor, material, equipment, and overhead costs., • Analyze and compile estimate data that affects the cost of labor, materials, equipment requirements, location and other factors to ensure a high-quality and timely estimate., • Obtain and evaluate quotes from contractors/subcontractors and suppliers, and negotiate the best terms and prices., • Prepare and submit bid proposals and supporting documents to clients and follow up on the status and outcome of the bids., • Review contracts and change orders, ensuring compliance with project specifications and company policies., • Collaborate with project managers, engineers, and other stakeholders to ensure smooth project execution and customer satisfaction. NOTE:These duties listed are meant to describe the general scope of the work. Other duties may be assigned based on business needs within the organization. QUALIFICATIONS: • Bachelor's degree in civil engineering, construction management, or related field., • Minimum 10+ years of experience estimating construction projects, both Public and private works., • At least 7 years of experience bidding on and building civil public works projects as a prime bidder., • Experience with bidding Caltrans and other city and county agencies required., • Proficient in using estimation software, such as HCSS, Bluebeam, On-Screen Takeoff, or similar., • Strong knowledge of construction methods, materials, codes, and regulations, especially related to concrete structures., • Excellent analytical, mathematical, and problem-solving skills., • Exceptional communication, negotiation, and presentation skills., • High attention to detail, accuracy, and quality., • Ability to work independently and as part of a team., • Ability to handle multiple projects and deadlines in a fast-paced environment., • Willingness to travel to project sites as needed. OTHER: • General work environment sitting for long periods, standing, walking, typing, bending., • Occasional lifting of up to 20 lbs. WHY JOIN JJA Joseph J. Albanese is a family-owned construction business established and based in Santa Clara, California since 1955. With approximately 1000 employees the company has been instrumental in developing Silicon Valley by performing site / structural concrete, demo, grading, and paving for many of the outstanding projects in Northern California. Our core values of Safety, People, Quality, and Truth! JJA utilizes BIM and other cutting-edge technology to verify constructability and to communicate complex project geometries to field professionals. We offer competitive pay and benefits. See some of our highlighted projects on our website at. Joseph J. Albanese, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description The laborer performs physical tasks for construction projects in the major technical trades. This position may operate hand and power tools. This position will also be responsible for cleaning and preparing job sites, digging trenches, and cleaning up rubble and debris. The specific on-site tasks are related to the needs and duties of each project. Cirks Construction Inc. (CCI), dba KDC Construction is a leader in the construction industry with diverse individuals dedicated to our people, customers, projects, and community. We are maintaining a strong focus on building a culture that encourages our employees to grow personally and professionally. KDC is also a proud recipient of the Top Workplaces 2022, 2023, and 2024, presented by the Orange County Register. KDC offers a competitive salary/hourly range $18.00 to $25.00- while considering the candidate’s experience and a comprehensive benefits package for full-time employees: Performance Expectations Striving to be the leader in construction and facilities services by exceeding customer expectations begins with each employee. Through the individual contributions of our employees, we can support our core values. To help us accomplish this goal, we ask you to SMILE. Job Description Education, Skills, and Experience: * Synergy – Divisions of the company, while independently functional, cooperate toward mutual success and stability through shared resources. * Marketing – Focused market expertise and strategic growth that ensure consistency, reliability, and superior client outcomes. * Innovation – Opportunities and solutions that enhance performance, safety, reliability, and client value, while supporting new and expanded business ventures. * Longevity – Long-term financial stability – Consistent 12-month business cycle. * Excellence – Unquestioned market leadership, Unsurpassed Quality, and Timeliness. Motivating work environment; employee professional growth and personal advancement. Job Description: * Assists with technical tasks in trades, including plumbing, electrical, concrete, flooring and roofing, painting, framing, drywall, and finishing skills for doors, windows, and cabinetry. * Assists with installing fixtures, including windows, roofing, floorings, trim, tile, ceiling, hardware, HVAC, and Switchbox. * Assists with framing tasks, including wood/metal, drywall, fiberglass reinforced plastic, and T-Bar. * Operates and maintains tools and equipment, including but not limited to drills, saws, nail guns, hammers, and shovels. * Responsible for handling tasks involving physical labor, as needed. * Travels to work sites in their vehicle to complete required tasks and projects. Projects may need a response to 24/7 emergency coverage. * Maintains a clean job site to eliminate possible hazards. * Ensures proper safety rules, regulations, and incident reporting are followed. * Organizes building material; loads and unloads trucks. * Responsible for assisting workers on Service & Maintenance assignments. * Reads instructions, specifications, or plans to determine work activities. * Responsible for working safely, adhering to all aspects of our Health, Safety, and Environmental Program for self-protection and protection of co-workers, sub-contractors, the public, and the client by supporting all Company safety efforts. * Other duties as assigned. * Knowledge of general trades: plumbing, electrical, concrete, flooring and roofing, painting, framing, drywall, and finishing skills for doors, windows, and cabinetry. * High school diploma or equivalent. * Possess tools required to perform job functions. * Organized and dependable team player with solid communication skills. * Professional and results-driven. * Friendly and positive attitude towards change. * Able to identify a need, remove barriers, and have the know-how to make things happen. * Values diversity of ideas, opinions, and people. Has good common sense and applied logic. * Must possess or be able to obtain an appropriate state driver's license before employment, along with a clean driving record and reliable transportation High school diploma or equivalent. * Possess tools required to perform job functions. * Organized and dependable team player with solid communication skills. * Professional and results-driven. * Friendly and positive attitude towards change. * Able to identify a need, remove barriers, and have the know-how to make things happen. * Values diversity of ideas, opinions, and people. Has good common sense and applied logic. * Must possess or be able to obtain an appropriate state driver's license before employment, along with a clean driving record and reliable transportation.

Job Description Harder Mechanical is one of the nation’s largest mechanical contractors with an outstanding reputation for working safely, meeting tough schedules, and delivering quality projects. Based in Portland Oregon, we work primarily in the 11-western states with regional offices in Reno, NV; Phoenix, AZ; Los Angeles, CA; Richmond, CA; and Salt Lake City, UT. As a Field Engineer, you will be working in one of these market sectors: Commercial Buildings (healthcare, higher education, mission critical, and retail), Advanced Technology (semiconductor manufacturing, renewable energy), or Industrial (pulp and paper manufacturing). Interested in finding out what our Field Engineers do day to day? Check out our video here! Successful projects do not complete themselves. Our team of curious and passionate people build on Harder's reputation every day through their actions. We offer professional development opportunities, industry-leading benefits, and the chance to work on projects that will change the built environment forever. Find out more at . What you’ll be doing: You will be responsible for planning, scheduling, and executing a specific scope of the project you are assigned to at Harder. You will coordinate with field labor to ensure the work is completed safely, on schedule, and up to Harder Mechanical's quality standards. This is an entry level role that serves as the entry point for a project management career at Harder. Field Engineers at Harder perform the following daily tasks: • Learn, follow, and promote Harder’s safety policies and protocols, • Review construction drawings and compile project scope and quantities, • Resolve engineering issues and constraints through communication with design engineers, owner representatives, and fellow team members, • Monitor field construction and ensure compliance with construction plans and specifications, • Engage in work sequence planning, • Prepare and monitor work packages, including labor and cost estimates, • Track construction progress and update status weekly, • Organize project records in an effective document control system, • Estimate future work, • Proficient in Microsoft Office & Bluebeam – intermediate skills in Excel, • Ability to communicate with a broad spectrum of people including suppliers, field crews, designers, and owners, • Self-starter, motivated and takes initiative, • Organized and productive, • Strong time management skills and ability to prioritize tasks on an ongoing basis, • Relentless commitment to teamwork and client satisfaction, • Interest in LEAN construction principles, • Ability to travel to other regions to gain exposure to additional markets and industries, • Must have valid driver license, • Bachelor's Degree in Construction Management, Business Management, Mechanical, Industrial, Civil Engineering and/or equivalent experience or education, • Competitive salary, • Comprehensive medical, dental, and vision benefits – 100% of employee premiums are paid by the company, • Generous retirement package includes: 10% retirement contribution made by the company and a company match up to 2% of your annual salary, • Profit sharing, • Discretionary annual bonus, • Paid vacation and holidays, • Harder University training and development, as well as other paid professional development opportunities This position is salaried, compensation $70,000 to $85,000. No recruiters. No phone calls, please. About Harder Harder Mechanical Contractors is an equal opportunity employer. All qualified applicants will receive consideration without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, genetic information, veteran status, or any other characteristic protected by federal, state or local nondiscrimination laws. Our hiring policy reflects and affirms Harder’s commitment to the principles of fair employment. Harder does not discriminate regarding the terms and conditions of employment based on any characteristic protected by federal, state or local nondiscrimination laws. It is Harder’s policy to maintain a drug and alcohol-free work environment. Employment offers are conditional upon successfully passing a drug and alcohol test, background checks, reference checks, and as required by law, regardless of citizenship or national origin, documented proof of authorization to work in the United States. Powered by JazzHR 0iUhXDoYq0

Job DescriptionCompany Description Turner & Townsend is a global professional services company with over 22,000 people in more than 60 countries. Working with our clients across real estate, infrastructure, energy and natural resources, we transform together delivering outcomes that improve people’s lives. Working in partnership makes it possible to deliver the world’s most impactful projects and programmes as we turn challenge into opportunity and complexity into success. Our capabilities include programme, project, cost, asset and commercial management, controls and performance, procurement and supply chain, net zero and digital solutions. We are majority-owned by CBRE Group, Inc., the world’s largest commercial real estate services and investment firm, with our partners holding a significant minority interest. Turner & Townsend and CBRE work together to provide clients with the premier programme, project and cost management offering in markets around the world. Job Description Turner & Townsend is seeking a Senior Cost Estimator to support a global technology client on innovative workplace construction projects in Cupertino, California. This role will be responsible for developing accurate and detailed cost estimates, ensuring financial feasibility from pre-construction through project completion. The ideal candidate will have strong analytical skills, deep knowledge of construction cost drivers, and the ability to collaborate effectively with project teams, contractors, and clients. *This is a hybrid role, requiring onsite presence three days per week (Tuesday–Thursday) at the client’s Cupertino campus. Responsibilities: • Prepare accurate and detailed cost estimates for workplace construction projects, including new builds, remodels, tenant improvements, and renovations., • Interpret drawings and specifications to assess scope and apply knowledge of materials, labor, equipment, and subcontractor pricing. Develop accurate cost projections using conceptual modeling, historic pricing analysis, and detailed quantity takeoffs to support early‑stage and pre‑construction planning. * Build and maintain project cash flow forecasts, ensuring alignment with schedule milestones, procurement strategies, and financial controls. * Identify and drive process improvement opportunities within estimating workflows, enhancing accuracy, efficiency, and cross‑department collaboration. • Identify and quantify all direct and indirect costs, including site work, building systems, and finishes., • Perform value engineering to help clients meet budget goals without compromising quality., • Develop and maintain cost databases using historical pricing and industry trends., • Assist in soliciting and reviewing subcontractor and supplier bids., • Analyze bid proposals and contracts to identify discrepancies or inconsistencies., • Prepare cost analysis reports and present findings to clients and senior management., • Monitor construction costs throughout the project lifecycle to ensure budget adherence., • Provide regular updates on cost status and potential financial risks., • Assist in forecasting and managing project cash flow., • Collaborate with project managers, architects, engineers, and subcontractors to align scope and cost., • Attend project meetings and provide input on cost management and budget changes., • Maintain detailed records of estimates, change orders, and documentation for auditing., • Prepare and submit formal reports, including budget summaries and variance analyses., • Identify and assess cost risks and recommend mitigation strategies., • Stay current on industry trends, economic factors, and regulatory changes., • SOX control responsibilities may be part of this role, which are to be adhered to where applicable.Qualifications, • Bachelor’s degree in Construction Management, Engineering, Architecture, or a related field., • Minimum of 7 years’ experience in cost estimating within workplace construction or related sectors (e.g., commercial, hospitality, institutional)., • Deep understanding of cost estimation, including materials, labor, and specialized systems in workplace environments., • Knowledge of local construction codes, regulations, and industry standards., • Proficiency with estimating software (e.g., ProEst, Buildertrend, Procore, Bluebeam)., • Strong analytical, problem-solving, and negotiation skills., • Ability to manage multiple projects under tight deadlines., • Excellent written and verbal communication skills., • Estimator certification (e.g., AACE, ASPE) is a plus. Additional Information The salary range for this full-time role is $140K-$155 per year. Ranges are determined by role and level and represent a good faith effort to provide a fair and equitable salary. This range is a reflection of base salary only, not of a total compensation package. Please note Turner & Townsend reserves the right to pay more or less than the posted range, depending on candidate’s experience and qualifications. Qualified candidates with arrest or conviction records will be considered for employment in accordance with LA County ordinance and CA law. Our inspired people share our vision and mission. We provide a great place to work, where each person has the opportunity and voice to affect change. We want our people to succeed both in work and life. To support this we promote a healthy, productive and flexible working environment that respects work-life balance. Turner & Townsend is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees and actively encourage applications from all sectors of the community. Please find out more about us at Turner & Townsend does not accept any speculative or unsolicited CV’s that have been sent to our internal recruitment team or hiring managers from agencies outside of our preferred supplier list or that have not followed due process. Any speculative or unsolicited CV’s will be treated as a direct application. All your information will be kept confidential according to EEO guidelines. #LI-DL1 Join our social media conversations for more information about Turner & Townsend and our exciting future projects: Twitter Instagram LinkedIn It is strictly against Turner & Townsend policy for candidates to pay any fee in relation to our recruitment process. No recruitment agency working with Turner & Townsend will ask candidates to pay a fee at any time. Any unsolicited resumes/CVs submitted through our website or to Turner & Townsend personal e-mail accounts, are considered property of Turner & Townsend and are not subject to payment of agency fees. In order to be an authorised Recruitment Agency/Search Firm for Turner & Townsend, there must be a formal written agreement in place and the agency must be invited, by the Recruitment Team, to submit candidates for review.

Job Description BKF is a multi-service infrastructure consulting firm providing civil engineering and surveying services across California, the Pacific Northwest, and beyond. With offices throughout California and the Portland area, BKF has served transportation, water resources, land development, government, and federal clients for over 110 years. At BKF, you’ll find a unique opportunity to grow your career with intention. Our culture values professional autonomy, innovation, and meaningful collaboration across offices. We are proud to be recognized with the Great Place to Work certification for the second year in a row. BKF Engineers is seeking a Transportation Technical Manager with deep expertise in Caltrans standards, design manuals, and local procedures to lead the technical delivery of complex transportation capital projects. This role focuses on high-impact infrastructure such as grade separations, signalized intersections, roundabouts, and major roadway improvements. The successful candidate will provide strategic technical leadership, mentor engineering staff, and collaborate with internal teams and external agencies to ensure project excellence. This position is purely technical, with minimal to no business development responsibilities. Responsibilities • Serve as the technical lead on transportation projects, ensuring designs align with Caltrans Highway Design Manual and other applicable standards, • Oversee and review plans, specifications, and estimates (PS&E) for compliance with Caltrans specifications, special provisions, and project requirements, • Coordinate procurement and encroachment permitting processes for grade separations, roadway improvements, and specialized infrastructure in accordance with public agency procedures, • Conduct design reviews and quality checks to ensure engineering deliverables meet technical standards and project objectives, • Stay current with Caltrans updates, local agency manuals, and industry best practices to ensure ongoing compliance, • Manage construction staging and traffic handling strategies to minimize public disruption and meet safety and schedule goals, • Provide technical guidance and mentorship to junior and mid-level engineering staff, fostering a collaborative and growth-oriented environment, • Collaborate with internal project managers and multidisciplinary teams-including civil, traffic, and environmental-to deliver integrated design solutions, • Promote innovative design approaches such as roundabouts, adaptive traffic signals, and green infrastructure where appropriate, • Coordinate with public agencies including Caltrans, city/county authorities, and local municipalities to align on scope, schedule, and design, • Participate in internal and external project meetings, offering expert technical input and resolving design-related questions, • Support limited public outreach efforts to address community or stakeholder concerns related to project design and construction impacts, • Maintain organized project documentation in compliance with internal standards and public agency requirements, • Bachelor’s degree in Civil Engineering, Transportation Engineering, or a related field, • Active California Professional Engineer (PE) license required, • Minimum of 10 years of experience managing complex transportation projects, demonstrating technical excellence and consistent client satisfaction, • Deep knowledge of Caltrans Highway Design Manual, specifications, special provisions, and local agency procedures, • Proven success in delivering complex transportation projects, including highways, interchanges, signals, roundabouts, and grade separations, • Proficient in construction staging, traffic handling plans, and civil design software such as AutoCAD Civil 3D and MicroStation, • Strong leadership and team management skills, with the ability to mentor staff and support project execution, • Excellent communication and negotiation abilities, with a talent for translating technical concepts for clients and stakeholders, • Skilled in project management software and adaptable to emerging technology tools, • Willingness to assist with special projects as needed, • Ability to travel between BKF offices and off-site locations as required Physical Demands: Must be able to regularly talk, hear and operate a computer, keyboard and mouse and occasionally lift, pull/push and carry up to 20 pounds with accommodations. Work Conditions: Exposure to constant or intermittent sounds at a low or moderate level consistent with an office setting. Exposure to high-stress, fast-paced, deadline-oriented environment. Travel to other BKF locations and client sites may be required. Benefits • The typical base salary range for this position is $130,000.00-$190,000.00 a annualized depending upon skills, experience, education, and geographical location. This is a salary position paid biweekly., • Competitive salaries, profit sharing, and 401k., • Generous paid time off packages., • 9 Paid Holidays., • Flexible schedules., • Education reimbursement, Paid annual dues for professional and societal organizations. BKF Engineers does not accept unsolicited resumes from recruiters or employment agencies. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement and a specific solicitation for the position or other approved engagement request for the position with BKF Engineers, BKF Engineers reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited submittals are done at the risk of the recruiter. #LI-Hybrid

Job DescriptionWho We AreAt PRIME, a culture of empathy, trust, and belonging are foundational. This is integral in our approach to recruiting, developing, and retaining the best people in the industry. Our growth mindset drives us to embrace challenges and discover what sparks inspiration for creative solutions. PRIME is compelled to keep evolving, and creating new opportunities for those who perform. Our comprehensive services cover the entire lifecycle of a project, capabilities include electrical construction, service and maintenance, underground, utilities services, renewable energy, and low voltage technology solutions. Recognized as one of Silicon Valley’s Best Places to Work! About The RoleUnder minimal supervision, provide technical design, consultation, information, and assistance to internal and external customers to ensure that projects comply with all engineering standards. This role will lead major projects working with and supervising more junior engineers. Work will be completed in concert with the stated project requirements, all current codes, as well as Prime Electric Engineering Standards. The engineer will be responsible for designing, developing, and producing permits and construction documents for electrical systems.What You Will Do • Power distribution design including planning and implementing the electrical power delivery system from the utility service to the various loads within a building or facility, • Signal design planning and implementation of systems that transmit data, control signals, alarms and communications within a facility, • Lighting design focusing on the selection, placement and control of lighting fixtures to achieve the desired illumination for functional and aesthetic purposes, • Single Line Diagrams providing a graphical representation of an electrical power system with a facility, • Panel and Equipment schedules details and listing electrical circuits connected to specific distribution equipment, • Title 24 Energy Documentation to company with applicable State Energy Efficiency Standards, • Visit job sites to conduct field investigations, • Perform voltage drop, load, and demand calculations, • Coordinate with other construction trades and disciplines as needed, • Back check of own work for accuracy and completeness before submission to others, • Perform coordination between architectural, structural, mechanical, plumbing, process and all electrical trades, • Coordinate work with the project specifications or equipment buy-out, • Review electrical equipment submittals such as lighting, gear, generator, UPS, etc. during the construction phase of projects, • Conduct performance power studies including fault, coordination and arc flash, • Attend project design team meetings; interface with various team members, particularly the client, architect, and mechanical contractor/engineer, • Research and resolve drawing interpretation problems, conflicts, interferences, and errors, • Document and archive work pursuant to Prime Electric standards, • Adhere to the PRIME Safety Program, complying with safety regulations, procedures and safe work practices., • Maintain a physical presence onsite and provide assistance to specific groups, managers and project management teams as needed., • Performs other duties as requested; duties, responsibilities and activities may change, or new ones may be assigned at any time with or without notice.What You Will Need to be Successful, • Bachelor of Science degree in electrical engineering, and 7 to 10 years’ experience in electrical systems design; or equivalent combination of education and experience., • Professional Engineer Licensure (PE) required, • Proficient in MS Word & Excel, • Experience with Autodesk AutoCAD, Revit & Navis Manage, • Expert knowledge of the NEC as well as building codes and ordinances, • Expert knowledge and experience with power and lighting design

Job DescriptionWho We AreAt PRIME, a culture of empathy, trust, and belonging are foundational. This is integral in our approach to recruiting, developing, and retaining the best people in the industry. Our growth mindset drives us to embrace challenges and discover what sparks inspiration for creative solutions. PRIME is compelled to keep evolving, and creating new opportunities for those who perform. Our comprehensive services cover the entire lifecycle of a project, capabilities include electrical construction, service and maintenance, underground, utilities services, renewable energy, and low voltage technology solutions. Recognized as one of Silicon Valley’s Best Places to Work! Position Summary: Working under general supervision, the Assistant Project Manager collaborates with Project Managers, and Field Management to ensure the successful planning, execution, customer satisfaction, and financial success of small-scale construction projects. What You Will Do • Manage small project scopes under the guidance of Project Managers., • Coordinate project activities to maintain project schedules., • Assist in change order estimates and provide estimating and budget support., • Attend in-person and virtual client and field meetings to ensure effective communication., • Provide administrative and logistical support including meeting arrangement, progress tracking and documentation., • Contribute to the enhancement of project management processes, tools, and methodologies, identifying opportunities for efficiency improvements and propose actionable solutions., • Apply familiarity with project cost forecasting and projections., • Maintain communication with various individuals and departments to ensure deliverables are met., • Coordinate project activities with vendors and subcontractors., • Monitor and track project changes (e.g. RFIs, design changes) and assist in document control efforts., • Develop and maintain positive client relationships to contribute to successful project outcomes, • Act as a key liaison between project teams, clients, vendors, and internal stakeholders to facilitate clear and effective communication aligned with project goals., • Monitors jobsite safety and takes appropriate action to address and correct deficiencies., • Adhere to the PRIME Safety Program, complying with safety regulations, procedures and safe work practices., • Maintain a physical presence onsite and regularly visit jobsites to oversee progress and provide assistance to the project management team as needed., • Performs other duties as requested; duties, responsibilities, and activities may change or new ones may be assigned at any time with or without notice.What You Will Need To Be Succuessful, • Bachelor’s degree in construction management or related field, and/or three to five years electrical construction industry experience or relevant experience and/or training; or equivalent combination of education and field experience., • Experience working with software-based estimating, accounting, scheduling, and project management systems. Knowledge of Accubid preferred., • Knowledge of electrical trade and/or construction-related background., • Familiarity with construction cost, scheduling, estimating, and engineering principles and techniques, as well as accounting principles., • Proficiency in electrical estimating to produce job change orders, evaluate and apply job estimates, and assist with new estimates as required., • Strong verbal and written communication skills, excellent organizational abilities, and effective prioritization skills.

Job DescriptionBenefits: • Company car, • Dental insurance, • Health insurance, • Paid time off Overview of Position We are looking for experienced Foremen for several jobs in CA. Job tasks include the following Job Duties & Responsibilities: • Manage a crew of 5 10 workers;, • Read and interpret drawings, blueprints, schematics/ electrical code specifications to determine layout of equipment installations, • Supervise and manage trenching for utility conduits, directing operators on backhoes, backfilling and underground scanning, • Supervise and manage pouring and finishing concrete pads for switchgear, Electrical Chargers, Bollards, directing paving, and overhead EMT conduit placement, • Supervise and manage Electrical resources on the job, • Arrange and coordinate safety meetings;, • Delegate tasks and responsibilities to crew members;, • Be the point of contact with the employers site superintendent;, • Supervise and train apprentices on the job, as required;, • Maintain a safe work environment by adhering to all company guidelines and OSHA safety requirements and also through reporting violations of policies, procedures and guidelines to immediate supervisor;, • Controlling inventory on truck, job-site, and in/out of stock (for active jobs);, • Organize and maintain material lists for your crew;, • Gathering required material;, • Responsible for maintaining company tools;, • Inspect jobs upon completion and ensure areas are clean;, • Work with building principals and supervisors to complete projects;, • Respond to emergency calls as needed;, • Updating work logs, client accounts, and handling other administrative duties., • Communicating with clients in a professional, courteous manner at all times., • Take AHJ inspections and follow up with the utilities.Secondary Functions, • Interpersonal Skills - Focuses on solving conflict, not blaming; maintains confidentiality; listens to others, is proactive in resolving issues., • Written Communication - Write clearly and informatively; conscious of audience and varies writing style accordingly, able to read and interpret written requirements., • Contributes to building a positive team spirit, • Time Management: Prioritizes and plans work activities, uses time efficiently, • Professionalism At all timesWhat we Offer:, • Salaried position, • Up to Two weeks of PTO, • Medical and Dental, • Company Truck with company credit card, • At least two crews with one foreman each, • Room for growthZero Impact Builders is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law.

Job Description Civil Engineer Type: Direct Hire | Full-Time Location: San Jose, CA | Los Angeles, CA | Bakersfield, CA | Chico, CA Salary: $119K–$172K DOE About the Role We are partnered with one of California's largest investor-owned water utilities to recruit a Civil Engineer focused on water infrastructure capital planning. This role sits within the company's Capital Planning group and is a direct contributor to the preparation and filing of the General Rate Case (GRC) application to the California Public Utilities Commission (CPUC). The engineer in this role will own the development of short- and long-term capital improvement plans for assigned districts, evaluate infrastructure condition and project need, conduct alternatives analyses, and produce the project justifications that support rate case filings. Work product directly informs how billions of dollars in infrastructure investment is prioritized and defended before regulators. The right candidate brings a strong foundation in civil engineering applied to water systems, the ability to translate complex technical analyses into clear written justifications, and ideally some exposure to the GRC or rate case process. A California PE license or active EIT registration is strongly preferred. Key Responsibilities Capital Planning & Project Development • Develop short- and long-term capital improvement plans for urban water infrastructure in support of the 2027 General Rate Case filing., • Evaluate district infrastructure needs, assess critical facilities, and perform life cycle cost analyses to determine optimal project selection., • Perform preliminary design of water supply, distribution, and transmission facilities to define accurate project scope, schedule, and budget., • Gather and analyze supply, storage, water quality, and operations data to inform capital improvement proposals. Project Justification & Rate Case Support • Prepare clear, well-structured project justification documents that identify need, analyze alternatives, define scope, and establish schedule and budget., • Evaluate justifications prepared by other stakeholders and perform quality control on project estimates and capital program submittals., • Work with the Rates Department to understand the companywide rate case process and support GRC filings, including multi-disciplinary meeting coordination., • Prepare and support responses to CPUC data requests, rebuttals, and settlements; participate in CPUC tours. Stakeholder Coordination & Field Engagement • Travel periodically to company districts to visit project sites, document future project needs, and coordinate with district staff., • Manage and oversee the work of external consultants on assigned capital projects., • Participate in internal and external presentations on proposed capital projects., • Train company staff on accessing and creating project justification documentation for proposed capital projects. Process & Program Improvement • Participate in developing standardized approaches to capital planning and asset management., • Analyze capital project completion results and identify recommendations for process improvement., • Support the company's Continuous Improvement program and related initiatives. Qualifications Required • Bachelor's degree in civil engineering or a directly related engineering discipline., • Experience in an engineering capacity with water system planning, design, construction, or cost estimating., • Strong written and verbal communication skills, including the ability to produce clear, concise technical justifications and reports., • Proficiency with Microsoft Office — Word, Excel, PowerPoint, and SharePoint., • Valid California Driver's License. Preferred • California Professional Engineer (PE) license; active EIT registration is strongly preferred., • Master's or Ph.D. in civil engineering or a related field., • Knowledge of CPUC/GRC rules, regulations, and rate case filing processes., • Experience with capital project planning, budgeting, and life cycle cost analysis., • Knowledge of water systems modeling, hydraulic modeling, and GIS., • Familiarity with asset management principles., • Project management experience; knowledge of PMI principles preferred., • Experience with utility cost estimating and basis of estimate documentation., • Knowledge of water quality regulations and water treatment facility design, operations, and maintenance., • Familiarity with electrical equipment used in urban water systems., • Public presentation and negotiation experience. Compensation & Employment Employment Type: The selected candidate will be hired as a full-time employee directly with our client. Salary: $119,000–$172,000 per year, DOE Benefits: Comprehensive benefits package offered by the client, including medical, dental, vision, retirement, and paid time off. Details provided during the interview process. Equal Opportunity Innovation Consulting LLC is an equal opportunity employer and recruiter. We review candidates without regard to race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected characteristic.

Job Description JOB TITLE: Facilities Construction Manager DUTIES AND RESPONSIBILITIES: • Mentor junior-level Construction Managers., • Install/remove large, medium, and small tools (electrical, mechanical, gas lines, ducting, gas distribution systems, decontamination, earthquake bracing)., • Install/remove major facilities (electrical, mechanical, gas lines, ducting, gas distribution systems, decontamination, earthquake bracing)., • Coordinate installation and construction projects:, • Develop detailed Request for Proposal/Scope of Work for Construction., • Obtain construction bids from approved suppliers., • Develop budget., • Develop appropriate purchase requisitions., • Develop detailed Construction Schedules including from major milestones to each task/activity level., • Coordinate construction activities, proactively schedule all vendors and contactors per approved project schedule., • Manage and monitor daily construction progress, report back to Facility Project Managers., • Coordinate and attend fire department walk through., • Coordinate and attend safety walk through., • Coordinate tool move planning with all vendors and contractors., • Manage all project documentation and compile for review with facilities project manager to close out project., • Use industry experience to ensure that design and construction contractors comply with safety, electrical, mechanical, environmental, fire, building, and other applicable codes and protocols:, • Support interview, planning, and design-data-collection as required by APPS LABS., • Assist in monitoring vendors for safety compliance., • Ensure project schedules are met., • Schedule and coordinate all safety walk through and corrective action items., • Coordinate decontamination walk through with EH&S and required parties., • Provide additional documentation (blue-line drawings for bids) to project contractors., • Escalate any constructability/design concerns issues to facilities project manager., • Assist facilities project manager with scheduling down time for tie-in activities., • Create project plans and other documentation for all work performed:, • Coordinate Work Plans Receival and Approval for Contractors/Vendors., • Monitor project progress and timelines., • Update and monitor plan, as needed., • Create and obtain approval for building alert., • Ensure that Process Gas and Liquid Delivery Installation Checklists are complete and properly filed with project documents., • Ensure that Chemical Use and Decontaminations checklists are properly filled out and filed with project documents., • Ensure that conditional and Full Use Checklists are properly completed and filed with project documents., • Ensure that Project Installation and Commissioning Checklists are properly completed and filed with project documents., • Ensure that Hot Work Permits are approved, posted, and filed with project documents., • Ensure that Chemical Authorization Forms are completed and filed with project documents., • Provide As-Built Drawings to update APPS LABS master file., • Prepare and track project budgets:, • Obtain multiple bids, as required., • Create budget for company awarded bid., • Assist the FPMs track bid against invoices., • Assist FPM with additional funding and any financial gaps., • Other responsibilities as assigned by employer and/or client. Management Responsibilities: • Perform as main interface between client and Employer., • Ensure compliance to all Service Provider and client policies and procedures., • Resolve Junior CM questions regarding policies, scheduling, billing and purchase order issues., • Report to Service Provider Management any inconsistencies or problems., • Assist with workload balance/project distribution concerns for maintaining minimum CM hours., • Propose improvements in process to facilities project manager. Requirements: · College Degree with 10+ years of industry experience or 15+ years of industry experience, degree in engineering field is preferred. · Knowledge of cleanroom protocols · Experience interfacing with members of various departments · Excellent organizational skills · Strong written and verbal communication skills · Strong Microsoft Excel, Power Point and Microsoft Project skills COMPETENCIES: · Adaptability - Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events. · Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments to long hours of work when necessary to reach goals; Completes tasks on time or notifies appropriate person with an alternate plan. · Interpersonal Skills - Focuses on solving conflict, not blaming; Maintains confidentiality; Listens to others without interrupting; Keeps emotions under control; Remains open to others' ideas and tries new things. · Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments. · Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality. · Quantity - Meets productivity standards; Completes work in timely manner; Strives to increase productivity; Works quickly. PHYSICAL DEMANDS AND WORK ENVIRONMENT: · Occasionally (less than 1/3 of the job) · Frequently (1/3 to 2/3 of the job) · Continually (more than 2/3 of the job) • Frequently required to stand., • Frequently required to walk., • Frequently required to sit., • Frequently required to utilize hand and finger dexterity., • Occasionally required to climb, balance, bend, stoop, kneel or crawl., • Continually required to talk or hear., • Occasionally work near moving mechanical parts, • Occasionally work in high, precarious places, • Occasionally work around fumes, airborne particles, or toxic chemicals, • While performing the duties of this job, the noise level in the work environment is usually moderate., • The employee must occasionally lift and /or move more than 30 pounds., • Specific vision abilities required by this job include Close vision; Distance vision; Peripheral vision; Depth perception and ability to adjust focus., • Must be able to wear personal protective equipment, including protective eye wear, a hard hat, lab coat, gloves, steel-toed shoes, hearing protection, and respirators., • Must be able to safely access and traverse indoor and outdoor obstacles for site inspections, including climbing ladders, walking on stairs, catwalks, and other types of uneven surfaces where activity inspections are needed. Benefits • Health Care Plan (Medical, Dental & Vision), • 401K, • Life Insurance, • Disability Insurance, • Paid Time Off, • Training & Development