Data manager jobs in North Tonawanda, New YorkCreate job alerts

Job DescriptionDescription: Primary Purpose: The Technician is responsible for the maintenance and repair and up-time of Admar Supply and customer equipment. Essential Functions: • Inspect and tag returned rental equipment noting any damage or other necessary repairs., • Using information on repair tag, and with input from Service Writer and Service Manager, troubleshoot equipment and make necessary repairs. Make sure equipment is properly repaired on a timely basis., • Report problems or issues with repairs to Service Manager. Provide detailed description of problem/issue and recommend solution, both short-term and long term., • Ensure all repairs have been fully and properly completed. Perform complete inspection of equipment to make sure no other repairs are needed; safety features are in place and working properly; equipment is clean and decals are readable and unit is rent-ready condition., • Complete all required paperwork on a timely basis; thoroughly complete all forms and reports making sure all entries are correct and legible., • Work in a safe manner obeying all safety rules; keep shop area clean and organized. Correctly use safety equipment and PPE as required., • Ability to define problems, collect data, establish facts. Identify root cause of failure(s), • Ability to interpret and follow instructions, solve problems involving concrete variables within well-defined situations., • Ability to read and understand drawings, schematics and diagrams necessary., • Complete internal and vendor training as assigned., • Be an integral part of “The Admar Experience” Requirements: To be successful in this role the following is preferred: • $18.00 - 22.00 per hour Technician Tier IV: Minimal relevant technician experience; qualified to perform work on a minimal number of products inscope for a technician at this location; primarily engaged in maintenance or basic repairs/diagnostics; requires direct supervision and review of workmanship quality, • $22.00 - 26.00 per hour Technician Tier III: Limited relevant technician experience; qualified to perform work on a moderate number of products inscope for a technician at this location; primarily engaged in maintenance or basic repairs/diagnostics; requires limited direct supervision and review of workmanship quality., • $25.00 - $30.00 per hour Technician Tier II: Relevant technician experience; qualified to perform work on an intermediate number of products inscope for a technician at this location; primarily engaged in moderately complex maintenance and repair; some exposure to moderate or complex diagnostics, requires limited direct supervision, may provide basic training or guidance to new technicians., • High school degree and 1+ years’ experience working in a service environment., • Experience working on construction related equipment preferred., • Experience with small engine repair preferred., • Knowledge of hydraulics and electrical systems preferred., • While performing the duties of this job the employee is regularly required to sit, stand and walk. Employee must be able to lift and carry up to 50 lbs., • The work environment is that of a typical Service Bay. Some exposure to cold, heat, noise, fumes and dust., • Specific vision requirements included close and distance vision, depth perception, peripheral vision and ability to distinguish colors PI4b34ce407c44-25405-40310355

About the Company: Since 1998, Asset Compliant Solutions (ACS) has partnered with lenders across the U.S. to mitigate risk, minimize losses, and improve portfolio performance. That longevity isn't accidental—it’s built on the expertise and commitment of the people who work here. We're a compliance-driven collections and recovery firm where your work directly impacts client outcomes. You won't be a cog in a machine. You'll be part of a team that values what you know, invests in your growth, and treats collaboration and respect as non-negotiables. If you're looking for a place where you can build real expertise and see the results of your contributions, we'd like to meet you. About the Role: The Compliance & Risk Manager is responsible for overseeing and maintaining ACS’s regulatory, contractual, and internal compliance programs. This role ensures the organization operates in accordance with federal, state, and client-specific requirements while maintaining strong internal controls and audit readiness. The Compliance & Risk Manager works cross-functionally with Operations, Client Experience, Accounting, and Vendor Management to support regulatory licensing, client audit preparation, vendor credential verification, complaint resolution, and internal quality control processes. This position also leads documentation and oversight of company policies, incident response procedures, and compliance frameworks such as SOC audits. This role provides second-line oversight across key compliance and risk domains, supporting leadership by identifying emerging risks, maintaining compliance documentation and evidence, and ensuring ACS remains audit-ready as regulatory and client expectations evolve. The ideal candidate is highly detail-oriented, organized, and experienced working in regulated environments where documentation, audit readiness, and risk mitigation are critical. Responsibilities: • Regulatory Licensing & State Compliance, • Manage all required state licensing for ACS and ensure timely renewals, • Monitor regulatory requirements across jurisdictions where ACS operates, • Coordinate responses to state regulatory audits and information requests, • Maintain documentation required for regulatory filings and licensing, • Maintain a regulatory change management process to identify, assess, and document the impact of new or revised laws on ACS operations, • Coordinate policy updates, operational changes, and internal communications resulting from regulatory change, • Client Compliance & Audit Management, • Coordinate client audits and information requests, • Maintain documentation required for client vendor onboarding and compliance reviews, • Ensure adherence to client contractual requirements and service level agreements (SLAs), • Support internal teams in meeting client-specific reporting and compliance obligations, • Maintain standardized responses and supporting documentation for recurring client compliance questionnaires and audits, • Vendor Compliance Management, • Oversee vendor credential verification including insurance, licensing, and operational capabilities, • Maintain vendor documentation and renewal tracking, • Partner with Vendor Management to ensure agents and vendors meet ACS and client compliance standards, • Support ongoing monitoring of repossession agents and third parties, including periodic reviews, issue escalation, and corrective action tracking, • Complaint Management, • Track, document, and investigate consumer or client complaints, • Ensure timely response and resolution in accordance with regulatory requirements, • Maintain complaint logs and reporting documentation, • Internal Audit & Quality Control, • Conduct internal compliance reviews to ensure operational processes meet regulatory and company standards, • Identify gaps, risks, or process improvements related to compliance, • Support leadership in implementing corrective actions and process improvements, • Assist with documentation of findings, remediation plans, and follow-up testing to ensure issues are resolved in a timely manner, • Incident Response & Risk Management, • Coordinate response to compliance-related incidents, including documentation and investigation, • Maintain incident response procedures and reporting protocols, • Work with leadership to mitigate operational and compliance risks, • Maintain a compliance risk register documenting identified risks, mitigation strategies, and remediation status, • Prepare periodic compliance and risk updates for leadership, • Information Security and Data Governance, • Provide compliance oversight for information security, data protection, and access management practices, • Partner with IT and leadership to validate adherence to documented security controls and client security requirements, • Support data classification, confidentiality, and retention practices aligned with regulatory and client expectations, • Participate in security risk assessments and control reviews supporting SOC and client audit readiness, • Policy & Procedure Management, • Develop, maintain, and update company policies and procedures, • Ensure policies remain aligned with regulatory requirements and operational practices, • Maintain organized documentation of all compliance policies and internal standards, • Manage version control, review cadence, and evidence linkage for compliance policies and procedures, • Compliance Frameworks & External Audits, • Coordinate and support external audits including SOC compliance reviews, • Prepare and maintain documentation required for audit readiness, • Partner with internal teams and external advisors during compliance reviews, • Act as a primary coordinator for audit evidence requests, sampling support, and auditor communications, • Training & Compliance Awareness, • Coordinate compliance-related training programs, including onboarding and periodic refresher training, • Maintain training records and employee compliance attestations for audit and regulatory purposes, • Support development of role-based compliance guidance and communications Qualifications: • 3–7 years of experience in compliance, regulatory oversight, risk management, or audit roles, • Experience working in regulated industries such as financial services, collections, recovery, or lending preferred, • Strong understanding of regulatory compliance frameworks and audit processes, • Experience managing licensing, audits, or regulatory documentation, • Exceptional attention to detail

Job DescriptionJob Title: Warehouse AssociateLocation: Tonawanda, NYHire Type: Direct HirePay Range: $18.00 - $19.00/hourWork Type: Full-timeWork Model: OnsiteWork Schedule: Monday – Friday, 8:30am – 5pm Recruiter Contact: Blanca Vega, & Scope:Positional OverviewThe Imagine Group is recruiting for a Warehouse Associate on behalf of our client, a leading manufacturer and distributor of engineered fastening solutions. This company serves a wide range of industries including automotive, aerospace, and industrial manufacturing. In this role, you will be responsible for receiving, storing and organizing inventory. In addition, you will assist with picking and packing orders for shipment, performing regular inventory counts and ensuring all products are handled and shipped according to company quality and safety guidelines. As part of our team, you will enjoy a comprehensive benefits package, including: • Medical & Employer Paid: Dental & Vision starting May 1, 2025, • Paid Parental Leave, • 401K and Employer Match, • Paid time off and holidays, • Tuition Reimbursement, • Paid on-the-job Training, • Performance Incentive Bonuses, • Community Volunteering, • Employee Centric CultureRole & Responsibility:Tasks That Will Lead To Your Success, • Receive products and other goods. Use ERP system, JD Edwards, as required for receiving direct finished goods., • Pick orders using our ERP system, JD Edwards, utilizing a Microsoft tablet, • Verify quantity of products received by reading shipping information and box quantities., • Identify and stock products accurately and timely into warehouse bin locations utilizing scanning equipment., • Re-package products as needed by counting items and ensuring the accurate quantity is in each box., • Maintain and process order using tool assembly, bagging machine, rework, and quality sorting., • Prepare and ship product per customer requirements and shipping orders (including bar codes), or secondary process requirements., • Maintain equipment checklists and minimal equipment upkeep. Including scales, forklifts, etc., • Complete required daily and monthly maintenance checklist. Report issues to manager(s)., • Maintain clean warehouse area- following policies and procedures for housekeeping and safety., • Verify returned material authorization (RMA) quantities, part numbers, customer names etc. and close RMA in Syspro., • Become and maintain Penn Engineering approved Forklift certification within 3 months of employment., • Other duties as assignedSkills & ExperienceQualifications That Will Help You Thrive, • High school diploma or equivalent, • 1+ Years of warehouse experience preferred, • Ability to read and communicate both verbally and written in English, • Skill in adding, subtracting, multiplying and dividing numbers, • Ability to use a computer for data entry, data retrieval and updating orders appropriately, • Ability to utilize barcode scanning technology, • Experience with JD Edwards ERP System or another ERP System preferred, • Frequent lifting and carrying of items, often ranging from 10 to 50 pounds (sometimes heavier)., • Frequent lifting as a team for items over 50 pounds, • Standing and walking for extended periods, often 8–12 hours per shift., • Bending, stooping, and crouching to pick up or move items., • Reaching overhead and at various angles to access shelves or storage areas., • Pushing and pulling carts, pallet jacks, or other equipment., • Climbing ladders or stairs to reach high storage areas., • Operating machinery such as forklifts, pallet jacks, or conveyor belts (may require certification)., • Repetitive motions such as scanning, packing, or sorting items., • Working in varying temperatures, including cold storage or hot environments., • Manual dexterity for handling small items, labeling, or packaging.

Job DescriptionDescription: The Manufacturing Deburr Leadman is a skilled deburr technician that can lead a team of deburr employees on quality and packaging of all CNC manufactured product at Snyder Industries. Oversees the shipping/receiving department to ensure correct product is shipping to meet on time delivery targets. Works with internal sales team to prioritize product flow through final inspection. Works with internal quality team on non-conformances found at final inspection. Uses blueprints, ship lists, and computer MRP software to meet customer requirements. Requirements:Essential Duties and Responsibilities The essential functions include, but are not limited to the following: · Blueprint reading, GD&T, Excel, ERP systems. · Understand manufacturing processes: Turning, Milling, Gear cutting, and Heat treating. · Works with Quality Manager on non-conformances found in department · Oversees final tapping operations · Prioritizes product for deburr employees with help with Sales department · Reviews final inspection checklists and visual inspections before packaging products · Performs visual inspection in accordance with customer specifications and ISO 9001:2015 requirements · Utilizes the ship list and working with production analyst to meet delivery needs · Performs diversified deburring and final inspection duties · Operates tools and equipment such as hand grinder, Bridgeport mill, polishing station, and tap tables · Works with engineering team on gauge needs, fixturing, tooling. · Works with quality department with calibration needs · Manages organization of inspection area and raw material warehouse · Complies with safety regulations in all aspects of performing job responsibilities. · Operates computer and enters inspection data · Other Misc. Deburr/Inspection functions Minimum Qualifications (Knowledge, Skills, and Abilities) · Experience and interest in a CNC machining job shop environment · Strong written and verbal communication skills · Attentive to detail; organized · Ability to supervise/lead team · Ability to take initiative, to maintain confidentiality, to meet deadlines, and to work in a team environment · Recommend: MS Office Suite (Outlook, Word, Excel, PowerPoint) · Recommend: Understanding of raw materials: castings, forgings, bar stock, plate materials · Recommend: Understanding of CNC turning, CNC milling, Heat treat (carburization, quench & tempering, induction hardening, welding), and gear cutting (Shaping & Hobbing) · Recommend: CNC Machining background Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. This position operates on the manufacturing floor. Employee will be responsible for looking at all angles of parts in the machine and on pallets. This role routinely uses standard office equipment such as computers, phones, cameras, copiers, and filing cabinets. While performing the duties of this job, the employee is regularly required to stand; walk; use hands; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear. The employee is occasionally required to sit. The employee must lift up to fifty (50) lbs. occasionally. Note This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship.

Iskalo Development Corp. is seeking a Facilities Manager to oversee the operational performance, maintenance, and continuous improvement of properties within our growing real estate portfolio. This is a hands-on, high-impact role responsible for keeping our buildings safe, efficient, and well-maintained—while delivering a strong experience for tenants and supporting long-term asset value. If you thrive in a fast-paced environment, enjoy solving problems in real time, and can balance day-to-day operations with larger capital projects, this role offers meaningful ownership and visibility across our portfolio. What You’ll Do Facilities Operations & Maintenance • Oversee day-to-day maintenance and physical operations across assigned properties, • Ensure HVAC, electrical, plumbing, life safety, and access control systems are operating efficiently, • Respond to property issues and coordinate emergency repairs as needed, • Partner with Property Management to address tenant needs and service requests Vendor & Contract Management • Develop scopes of work, solicit bids, and manage vendor selection, • Negotiate contracts to ensure cost-effectiveness and service quality, • Monitor vendor performance and proactively address service gaps, • Review and approve invoices for accuracy and completion Project Management • Lead maintenance initiatives and capital improvement projects from start to finish, • Develop budgets, timelines, and project plans—and keep them on track, • Oversee vendors and on-site work to ensure quality and safety, • Support long-term capital planning and asset improvement strategies Compliance, Safety & Risk Management • Support safety programs and ensure compliance with applicable codes and regulations, • Coordinate inspections and maintain compliance standards, • Assist with incident response and documentation, • Oversee fleet and equipment maintenance Systems & Reporting • Maintain accurate records of maintenance, inspections, and vendor activity, • Utilize platforms such as Corrigo and Procore to manage work orders and projects, • Leverage data and reporting tools to improve operations and decision-making What We’re Looking For • 7+ years of experience in facilities, property management, or a related field, • Experience managing vendors, budgets, and facilities-related projects, • Strong communication skills and ability to work across teams, • Highly organized with the ability to manage multiple priorities Core Strengths for Success • Hands-on operational leadership, • Strong problem-solving and decision-making skills, • Ability to build effective relationships with tenants, vendors, and internal stakeholders, • Attention to detail with strong execution Technical Skills • Working knowledge of commercial building systems and maintenance practices, • Experience with property management platforms (Corrigo, Procore preferred), • Proficiency in Microsoft Office, especially Excel Work Environment & Requirements • Valid driver’s license; travel between properties required, • Ability to work in both office and field environments, • Comfortable working outdoors and in active maintenance/construction settings, • Ability to lift up to 50 lbs and perform physical tasks as needed

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Provides day-to-day supervision and operations support for shift operators. Primary Duties/Responsibilities: • Direct shift operators in basic duties, setting priorities, troubleshooting operational and mechanical issues., • Interface with the client and contractors as needed when the Project Manager is not available., • Operate equipment manually and through instrumentation panels, computer terminals and programmable logic control units following process control procedures. Monitors and observes operating conditions, records observations and data in shift log. Diagnoses basic operational problems and takes corrective action per procedure., • Performs CLAIR (cleaning, lubrication, adjustment, inspection and minor repair) on machines and related equipment which may include pumps, valves, gates, mixers, conveyors, compressors, dryers, chemical feed, boilers, and chillers. Reports and documents results of work performed and enters into appropriate database., • Promptly reports any operational problems with machines or equipment to the Asset Manager and/or Project Manager., • Troubleshoots mechanical, hydraulic or pneumatic equipment to determine repairs needed. Dismantles equipment to gain access to and repairs defective parts using hand tools, power tools and precision measuring and testing devices. Re-assembles and tests equipment ensuring safe and efficient operating condition is restored., • Collects water and wastewater samples according to schedule. Performs field tests in order to pace chemical dosages for process and odor control units. Prepares chemical solutions, monitors supplies and recommends reorder., • Performs lab tests and prepares reports per procedure. Analyzes parameters including pH, alkalinity, chlorine residuals and other tests as required., • Performs maintenance on lab and field equipment and instrumentation including pH meters, specific ion meters., • Changes and cleans probes, magnetic strips, floats and sensors on instrumentation., • Performs instrument calibration, including resetting of set points as assigned., • Performs facility maintenance and repair and may replace or install light bulbs, florescent tubes, and paint., • Performs manual labor including cleaning equipment, facilities and grounds as required and properly disposes of waste according to safety and environmental policies., • Spends 100% of time in operations / light maintenance environment., • Typically spends 5 – 10% of time exposed to outdoor and sometimes inclement weather., • Required to work on rotating 7/24 shift schedule when shift operators are not available., • Possible Work Hazards: May be exposed to possible operations hazards including fumes, dust, toxic and caustic chemicals, noise, rotating machinery, high pressure and hot and cold temperatures, slippery surfaces, water and electrical hazards. Qualifications Education/Experience/Background: • High school or GED with the ability to read, write and comprehend English (operational, process, safety and quality instructions) and be able to carry out verbal and written instructions., • Ability to perform basic mathematical calculations., • Some vocational training and mechanical aptitude required, with the ability to read, interpret and record data from meters, gauges, scales, panels, computer consoles and other equipment., • Must demonstrate proficiency in the care and use of all site specific, facility required PPE (Personal Protection Equipment), including respirators, etc., • Must consistently demonstrate the ability to perform all assigned tasks in an accurate and timely manner., • Must demonstrate ability to efficiently operate and perform minor PM’s on a variety of equipment which may include pumps, valves, mixers, chemical feed equipment, boilers, compressors, and chillers., • Knowledge of HOA (Hand – Off – Auto) operational controls and how settings apply to operational control scheme., • Must have the ability to diagnose mechanical and process problems in multiple unit processes, troubleshoot mechanical, electro-mechanical, hydraulic or pneumatic equipment and take corrective action within policy and procedure limitations., • Good verbal and written communication skills are necessary., • Must be able to work a 12-hour shift rotation, 7/24 shift schedule (Dupont Schedule) as needed to cover operator shift as needed. Must be able to cover OT shifts as required., • Must have or be able to obtain a Class 2 New York Boiler License as required by regulatory agency at site within 6 months of start date., • Must possess a valid driver’s license and a safe driving record., • Employee Orientation, Departmental Operating Procedures, Safety, OSHA and Quality Training., • Forklift Certification., • Class 2 City of Buffalo Stationary Engineer license., • Works in various positions; works on ladders, catwalks, and supports at heights of 30 feet above the ground; and works with hands extended above and below head and body up to 40 minutes using hand tools weighing up to 15 pounds., • Must be able to lift and carry 50 pounds (occasionally 60 pounds) distances of 50 feet., • Occasional stooping, bending or kneeling and entering confined spaces., • Required to turn valve handles and wheels on valves., • Required to use shovels for snow removal or material transfer., • Must be able safely drive a powered industrial forklift. Additional Information Pay Range: $43.00 to $50.00 per hour. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job DescriptionJob Description CUSTOMER SERVICE REPRESENTATIVE We are very actively recruiting individuals seeking jobs during this time! We are seeing an increase in business and the need for more individuals to be a part of our team. Come join our team and be a beacon of comfort for your community!! DOMINO'S PIZZA - ABOUT THE JOB You got game? You got spring in your step? You want the best job in the world! And schedules that work with you, not against you? That's right, we live to beat the rush and make it possible to make, bake or take pizzas during the hungry hours of the day and night, part or full time. You'll have plenty of time left over for school, hanging with your friends, or whatever. Sound good? Even if you just need a second job for some extra cash, Domino's Pizza is the perfect place for you. We are searching for qualified customer service reps with personality and people skills. We're growing so fast it's hard to keep up, and that means Domino's has lots of ways for you to grow (if that's what you want), perhaps to management, perhaps beyond. Whether it's your hobby, main-gig, or supplemental job, drop us a line. We're bound to have just the thing for you. ADVANCEMENT Did you know that 90% of all Domino's Pizza franchisees started working in a store? We are committed to promoting from within. Many of our team members began their careers as Customer Service Reps and today are successful business owners. From CSR to Management, General Manager to Supervisor, Supervisor to Director of Operations or Franchise Owners, our stores offer a world of opportunity! DIVERSITY Our mission is to recognize, appreciate, value and utilize the unique talents and contributions of all individuals. To create an environment where all team members, because of their differences, can reach their highest potential. SUMMARY STATEMENT We take pride in our team members and our team members take pride in Domino's Pizza! Being the best pizza delivery company in the world requires exceptional team members working together. At Domino's Pizza, our people come first! JOB REQUIREMENTS AND DUTIES · Operate All Equipment · Prepare Product to Standard Specifications · Clean Equipment and Facility Daily · Work to a Schedule · Perfect Image and adherence to standards · Great Customer Service · Attendance & punctuality, Transportation to/from work · Store cleanliness · Ability to comprehend and give correct written instructions · Ability to communicate verbally with customers and co-workers to process orders both over the phone and in person · Ability to add, subtract, multiply, and divide accurately and quickly (may use calculator) · Ability to enter information into digital systems using a computer keyboard or touch screen BENEFITS · Systematic Training and Potential Management Development · Flexible Schedule · Meal Discounts · Group Health Insurance (eligibility requirements) WORK CONDITIONS Exposure to · Varying and sometimes adverse weather conditions when removing trash and performing other outside tasks · In-store temperatures range from 36 degrees in cooler to 90 degrees and above in some work areas · Sudden changes in temperature in work area and while outside · Fumes from food odors · Exposure to cornmeal dust · Cramped quarters including walk-in cooler · Hot surfaces/tools from oven up to 500 degrees or higher · Sharp edges and moving mechanical parts TEMPERAMENTS The ability to direct activities, perform repetitive tasks, work alone and with others, work under stress, meet strict quality control standards, deal with people, analyze and compile data, make judgments and decisions. PHYSICAL REQUIREMENTS including, but not limited to the following: · Talking and hearing on telephone · Near and mid-range vision for most in-store tasks · Depth perception · Ability to differentiate between hot and cold surfaces · Standing: Most tasks are performed from a standing position · Walking short distances for short durations · Lifting Bulk product deliveries are made twice a week or more and are unloaded by the team members Deliveries may include cases of ingredients and supplies weighing up to 50 pounds. Cases are usually lifted from floor and stacked onto shelves up to 72" high Qualifications Must be older than 18. Must be available to work between 3-11. Must be available to work Saturday/Sunday OR every other weekend. Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description Role Overview: Encoura is hiring students to work as Engagement Ambassadors at the University at Buffalo Engagement Center. Engagement Ambassadors conduct meaningful digital and traditional interactions with alumni, parents, and friends. The part-time Engagement Ambassador may contact prospects using text, video, or phone while conducting themselves as a professional representative of one of Encoura's partner institutions. Engagement Ambassadors can gain experience in marketing, networking, fundraising and sales negotiations while working at the Engagement Center. If you're looking for a rewarding part-time position that boosts your resume and communication skills, see below to learn more and apply today! A Day in the Life: • Contact donors and prospects to collect donations, verify information, and share institutional updates., • Capable of following a script when reaching out to prospects., • Accurately enter data into our computer system., • Meet or exceed goals as outlined by your manager., • Work a minimum number of shifts each week/month., • Current student at University at Buffalo., • Demonstrated strong command of English (both verbal and written)., • Capable of effectively communicating with a variety of individuals., • Working knowledge of Microsoft Office., • Must be able to operate in an office setting and routinely use standard office equipment such as computers, phones, etc., • Must be able to work in an environment where the noise level is moderate. Center Hours: • Monday - Thursday 6:00 - 9:00 pm (Eastern) ET Willie R. Evans Quadrangle, 122K Ellicott Buffalo, NY 14221 Ellicott Complex - Across the courtyard from Door #7 Questions – reach out to: Aarushi Bharadwaj Engagement Center Manager About Us Encoura's mission is to empower students and institutions to create meaningful connections so everyone can make the most informed decisions to achieve their goals. Since 1972, the Company has evolved its products and services to better represent the link between students and higher education institutions and to create the highest probability of student success. Encoura's expertise now spans enrollment, research, marketing, student success, and advancement and provides an unmatched combination of higher education experience and innovative solutions for colleges and universities. The Company also offers Encourage® — the nation's largest free college and career planning program used by millions of high school students and educators nationwide. It is the policy of the Company to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. All applicants must be eligible to work in the U.S. Encoura endeavors to make reasonable accommodations for applicants with disabilities and disabled veterans pursuant to applicable federal and state law. If you are an individual with a disability and require reasonable accommodation to complete any part of the application process or are limited in the ability and need an alternative method for applying, please contact the Talent Team. Applicants from California, please review the CA HR Privacy Notice. To review our privacy policy, please click this link:

Payroll Manager Job Duties: Maintains payroll information by designing systems; directing the collection, calculation, and entering of data. Balances the payroll accounts by resolving payroll discr

Job DescriptionJob Description CUSTOMER SERVICE REPRESENTATIVE We are very actively recruiting individuals seeking jobs during this time! We are seeing an increase in business and the need for more individuals to be a part of our team. Come join our team and be a beacon of comfort for your community!! DOMINO'S PIZZA - ABOUT THE JOB You got game? You got spring in your step? You want the best job in the world! And schedules that work with you, not against you? That's right, we live to beat the rush and make it possible to make, bake or take pizzas during the hungry hours of the day and night, part or full time. You'll have plenty of time left over for school, hanging with your friends, or whatever. Sound good? Even if you just need a second job for some extra cash, Domino's Pizza is the perfect place for you. We are searching for qualified customer service reps with personality and people skills. We're growing so fast it's hard to keep up, and that means Domino's has lots of ways for you to grow (if that's what you want), perhaps to management, perhaps beyond. Whether it's your hobby, main-gig, or supplemental job, drop us a line. We're bound to have just the thing for you. ADVANCEMENT Did you know that 90% of all Domino's Pizza franchisees started working in a store? We are committed to promoting from within. Many of our team members began their careers as Customer Service Reps and today are successful business owners. From CSR to Management, General Manager to Supervisor, Supervisor to Director of Operations or Franchise Owners, our stores offer a world of opportunity! DIVERSITY Our mission is to recognize, appreciate, value and utilize the unique talents and contributions of all individuals. To create an environment where all team members, because of their differences, can reach their highest potential. SUMMARY STATEMENT We take pride in our team members and our team members take pride in Domino's Pizza! Being the best pizza delivery company in the world requires exceptional team members working together. At Domino's Pizza, our people come first! JOB REQUIREMENTS AND DUTIES · Operate All Equipment · Prepare Product to Standard Specifications · Clean Equipment and Facility Daily · Work to a Schedule · Perfect Image and adherence to standards · Great Customer Service · Attendance & punctuality, Transportation to/from work · Store cleanliness · Ability to comprehend and give correct written instructions · Ability to communicate verbally with customers and co-workers to process orders both over the phone and in person · Ability to add, subtract, multiply, and divide accurately and quickly (may use calculator) · Ability to enter information into digital systems using a computer keyboard or touch screen BENEFITS · Systematic Training and Potential Management Development · Flexible Schedule · Meal Discounts · Group Health Insurance (eligibility requirements) WORK CONDITIONS Exposure to · Varying and sometimes adverse weather conditions when removing trash and performing other outside tasks · In-store temperatures range from 36 degrees in cooler to 90 degrees and above in some work areas · Sudden changes in temperature in work area and while outside · Fumes from food odors · Exposure to cornmeal dust · Cramped quarters including walk-in cooler · Hot surfaces/tools from oven up to 500 degrees or higher · Sharp edges and moving mechanical parts TEMPERAMENTS The ability to direct activities, perform repetitive tasks, work alone and with others, work under stress, meet strict quality control standards, deal with people, analyze and compile data, make judgments and decisions. PHYSICAL REQUIREMENTS including, but not limited to the following: · Talking and hearing on telephone · Near and mid-range vision for most in-store tasks · Depth perception · Ability to differentiate between hot and cold surfaces · Standing: Most tasks are performed from a standing position · Walking short distances for short durations · Lifting Bulk product deliveries are made twice a week or more and are unloaded by the team members Deliveries may include cases of ingredients and supplies weighing up to 50 pounds. Cases are usually lifted from floor and stacked onto shelves up to 72" high Qualifications Must be older than 18. Must be available to work between 3-11. Must be available to work Saturday/Sunday OR every other weekend. Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description We are looking for a Manufacturing Engineer to join our growing company. Our customers drive the work we do, and we empower our employees to deliver best-in-class service. As part of our team, you are responsible for identifying new methods, resolving problems, achieving cost savings, and working with internal teams to ensure production runs smoothly and safely. Our ideal candidate has a bachelor’s degree in mechanical engineering or a related field, professional experience within a manufacturing and design environment, and strong problem-solving and math skills. Responsibilities: • Act as the single point of contact to resolve tool-related problems related to manufacturing, • Coordinate with the plant to resolve safety, quality, throughput, or cost issues related to tooling, • Generate and implement cost savings ideas to reduce tool and manufacturing costs, • Manage weekly tooling spend against a variable piece cost budget, • Perform and document tool trials and adhere to customer tool test procedures, • Revise and update tool drawings and documentation as required, • Develop new systems to recondition and re-use tooling when economically feasible, • Attend regularly scheduled operations and team problem-solving meetings, • Assist team in resolving machining and tooling-related issues relating to costs, scrap rates, and low production rates, • Support cross-functional teams to achieve overall plant metrics, • Recommend optimized machining processes and cutting parameters, • Introduce new technology and improved tooling designs, • Provide year over year Cost per Piece reduction plans, • Coordinate with the preset team on proper tool setup techniques, • Maintain PFEP and use PFEP and Top Spend Data to initiate savings projects, • Complete required cost savings and tool test documentation, • Report and document non-conformances, CARs, and continuous improvements, • Maintains safety and good housekeeping standards for the site, • Make decisions within the limits of general standards or procedures, • Report near misses and incidents to the site manager and cooperate with investigations Requirements: • 5 years of experience working in production machining, a bachelor’s degree in mechanical engineering, or experience working in a closely related technical field is preferred, • Prior experience designing and tooling parts in a manufacturing environment, • Strong math and problem-solving skills and ability to read blueprints and schematics, • Proficiency with computers, • Able to work with little to no supervision and ability to multitask, • Strong interpersonal, leadership, and organizational skills, • Paid time off and holiday pay, • Medical, dental, and vision benefits on your 1st day of employment

Job DescriptionDescription: The Quality Manager coordinates and directs quality inspection of parts, components, and materials produced in-house, and by sub-contractors/vendors by performing duties or through direction of his/her inspection team consistent with established standards, customer specifications, and production goals. Bridges the gap between production and quality to ensure quality inspections are in line with the production process. Manages CMM department on flow of product through final inspection, CMM programming priority, and gauging needs. Oversees Quality Inspector and non-conformance dispositions. Main contact for customer and supplier interaction for non-conformances, deviation requests, and corrective actions. Oversees Final Inspection team and ensures quality parts are shipped to customers expectations. Requirements: · Ensures a high level of internal and external communication and customer service. · Works with suppliers and vendors to ensure quality of all purchased materials or products. Investigates and corrects supplier/vendor issues relating to quality using the corrective action system. · Oversees PPAP/First Article customer approval process to ensure a quality product is produced. · Responsible for tooling/gauging analysis (GageTrack) · Formulates, implements, and maintains a proactive Process Control Program which includes Quality Control objectives complimentary to corporate policies and goals. · Oversees decisions on dispositions for in-process non-conforming products to salvage material. · Develop and use root cause analysis to implement quality improvement processes · Works with sales team to manage shipping goals. · Manages 1st and 2nd shift CMM department with quality first directive. · Works with production supervisors to prioritize CMM programming, First Article, improved processes, flow of product through the CMM room. · Oversees gauge calibration tracking to ensure all measuring devices are in compliance. · Designs and implements quality/process control training programs for key personnel in conjunction with managers · Works with the Vice President on maintaining the ISO9001:2015 Quality System · Manages internal and external quality audits · Applies total quality managements tools and approaches to analytical and reporting processes within each department, and prepares periodic and specific reports concerning departmental activities, problems, schedules, and rejected items. · Analyses data from non-conformance reports to put operations on hold until revisions have been approved and signed off by quality and management. As the Quality Manager, it is expected that the dress code is followed. This position operates within the CMM Inspection room and will be expected to manage from an office setting and on the manufacturing shop floor. This role routinely uses standard office equipment such as computers, phones, copiers, filing cabinets and fax machines. While performing the duties of this job, the employee is regularly required to stand; walk; use hands; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear. The employee is occasionally required to sit. The employee must lift up to fifty (50) lbs. occasionally. · Bachelor’s degree in Mechanical, Manufacturing, or Industrial Engineering · 3-5 years Quality related experience in a CNC machining job shop environment · Excellent people management skills; strong written and verbal communication skills · Supervisory/Management experience · Attentive to detail; organized · Strong analytical and root-cause capabilities and proactive drive to corrective action · Experienced in Kaizen and Lean Manufacturing techniques · Ability to work independently · Ability to take initiative, to maintain confidentiality, to meet deadlines, and to work in a team environment · Proficient in MS Office Suite (Outlook, Word, Excel, PowerPoint) and related accounting, HR and sales software. Management – of CMM Supervisor, Final Inspection/Deburr Supervisor, and shipping/receiving M-F – 6:00am – 4:30pm (Mon – Thurs), 6:00am – 2:20pm (Friday)

Job Description Robert Half Permanent Placement is partnering with a long-standing Buffalo, NY area company in on their search for a Pricing Analyst Manager to join their team. In this role you will lead a small team in developing and implementing industry-leading pricing strategies for an ecommerce-based supply business. This is a 100-% in-office position with a starting salary of $65,000 - $75,000, a total benefits package, and an employee focused culture with an amazing variety of perks! Responsibilities include but not limited to: • Lead and manage pricing strategy across 10+ ecommerce channels, optimizing for revenue growth, profitability, and market competitiveness, • Supervise and develop a team of two Pricing Analysts, driving data-informed decisions on sales velocity, competitive positioning, and inventory performance, • Analyze large, complex datasets to identify pricing opportunities and implement profit-maximizing adjustments across product catalogs, • Build and enhance analytical dashboards (Excel, Google Sheets, Google Data Studio) to streamline reporting and support real-time decision-making, • Monitor daily margins, pricing trends, and competitor activity to ensure consistent and accurate pricing across all platforms, • Forecast demand and pricing for key SKUs and product lines to support inventory planning and peak-season performance, • Track and evaluate marketplace metrics and compliance requirements while identifying strategies to reduce underperforming inventory, • Collaborate cross-functionally and leverage strong ecommerce knowledge (Amazon, eBay, Walmart) to align pricing strategies with broader business goals, • Experience with ERP and ecommerce tools, including NetSuite (custom saved searches) and platforms such as Cart.com, • Expert knowledge of ecommerce pricing strategies with a focus on Amazon knowledge is required, • Working knowledge of logistics operations, including shipping, receiving, and purchasing processes, • Ability to conduct market research and competitive analysis to support data-driven business decisions, • 2 + years of leadership directing workflow to team members is required

Job Description Quality Assurance Specialist Lornamead is currently seeking a Quality Assurance Specialist to join our team! This position will support and maintain the Quality Management Systems at Lornamead. Shift time: 11:00 a.m.- 7:30 p.m. (some flexibility available) Lornamead, Inc. manufactures and supplies hair care, skin care, oral care, and bath products in America. The company offers toothpastes, teeth whitening products and oral analgesics for drug chains and national food retailers. The company is headquartered in New York, with a manufacturing facility in Tonawanda, New York. Your Challenge: • Document Control Expert: Responsible for the design, implementation, and maintenance of the Quality Assurance Documentation and Change Management Systems. Responsible for issuance, tracking, and control of change controls, Standard Operating Procedures (SOPs), Master Batch Records, Test Records, Forms, Protocols, Amendments, and Final Reports including formatting, editing, and revisions., • Create and maintain all Certificates of Analysis (COAs) and other release documentation for finished goods supporting final release product for shipping. Submit completed COAs and other release documentation to the Quality Assurance Manager or designee for final approval., • Assists with contract customers’ quality assurance items, including documentation, COAs, CAPAs, and deviation updates as requested., • Ensure the calibration program remains updated and equipment owners are appropriately notified to remain in compliance, • Maintain Centralized Filing (Quality) and lead the archiving process., • Act as Deviation Coordinator for processing nonconformities, including the issuance of deviation numbers and on time closures., • Support in activities prior to, during and after external audits and inspections, as required., • Analyze Quality function data to ensure site compliance., • Support functions of the quality assurance group, including, but not limited to, batch record review, quality checks, incoming components and incoming raw materials., • Maintain the Training Matrix and support Lornamead’s Training Program by assisting with employee training (cGMP Training, Change Control, Deviations, etc)., • Bachelor’s Degree with 1-2 years of experience OR Associate’s Degree with 3-4 years of experience OR 6+ years of equivalent experience in a QA role within a regulated industry., • Knowledge of FDA Regulations and Health Canada Regulations for Drugs and Cosmetics preferred., • Experience with Microsoft Word, Excel, Outlook, Teams required., • Experience with electronic document management system and/or electronic quality management system preferred., • Ability to multitask and prioritize in a dynamic work environment., • Strong organizational, written/verbal and presentation skills., • Ability to sit, stand, walk, and lift up to 30 lbs throughout an 8-hour shift.

Job Description We are looking for an experienced safety director to join our company. In this role, you'll be responsible for enforcing and overseeing health and safety protocols for the company, and ensuring that employees are properly informed regarding emergency preparedness, use of protective equipment, and accident protocol. To ensure success as a safety director, you should display exceptional knowledge of company safety policies and relevant occupational safety and health administration (OSHA) standards. Ultimately, an outstanding safety director should be able to identify opportunities to minimize workplace health hazards quickly and efficiently. Safety Director Responsibilities: • Developing and implementing workplace safety policies and procedures in accordance with OSHA standards., • Providing personnel with safety-related information such as training sessions, emergency protocols, and proper use of safety equipment., • Reviewing existing policies and procedures to ensure they are up to date., • Overseeing the company's daily operations and identifying opportunities for improvement of safety regulations., • Performing safety audits and physically inspecting all work areas and jobsites to identify possible safety issues., • Conducting risk assessments to minimize workplace accidents, occupational illnesses or long-term health hazards., • Preparing monthly or annual safety reports and presenting the information to management., • Collaborating with management to plan and implement a safety protocol budget. Safety Director Requirements: • A bachelor's degree in safety management, environmental safety, or a similar field., • A certificate in occupational health and safety management., • At least 5 years’ experience as a safety director or health and safety manager., • Excellent knowledge of OSHA standards and federal safety legislation., • Solid knowledge of potentially hazardous materials or practices in the workplace., • Familiarity with writing health and safety policies and procedures., • Proficiency in conducting data analysis and reporting statistics., • Working knowledge of safety management software, such as iAuditor., • Strong communication and teamwork skills., • Excellent supervisory and leadership skills. Below are the classes we like to see a safety professional master: OSHA #7500 Introduction to Safety and Health Management OSHA #7505 Introduction to Incident (Accident) Investigation OSHA #7115 Lockout/Tagout OSHA #7300 Understanding OSHA's Permit-Required Confined Space Standard OSHA #7405 Fall Hazards for the Construction Industry OSHA 30-Hour Construction Industry Outreach OSHA #510 Occupational Safety and Health Standards for the Construction Industry OSHA #500 Trainer Course in Occupational Safety and Health Standards for the Construction Industry In addition to the above mastery, having a good rigging background is an asset, and the mastery below is sufficient: It is the policy of IICC not to discriminate against any applicant for employment, or any employee because of age, color, sex, disability, national origin, race, religion, or veteran status. While we sincerely appreciate all applications, only those candidates selected for interview will be contacted. Company DescriptionSince 1961, we’ve been dedicated to providing specialized rigging and turn-key equipment installation, removal and relocation services. Since our early days performing day jobs moving machinery around town (which we still do!), IICC has grown into a $1B dollar a year full-service company meeting our customers’ growing needs regardless of locations, size, complexity or value. To this day, we’re proud to be one of the largest owned equipment fleets in the industry. Offices in Sterling Heights, MI, Tullahoma, TN, Buffalo, NY, Monterrey, MX, and St. Catharines, OntarioSince 1961, we’ve been dedicated to providing specialized rigging and turn-key equipment installation, removal and relocation services. Since our early days performing day jobs moving machinery around town (which we still do!), IICC has grown into a $1B dollar a year full-service company meeting our customers’ growing needs regardless of locations, size, complexity or value. To this day, we’re proud to be one of the largest owned equipment fleets in the industry.\r\n\r\nOffices in Sterling Heights, MI, Tullahoma, TN, Buffalo, NY, Monterrey, MX, and St. Catharines, Ontario

Job DescriptionJob Description CUSTOMER SERVICE REPRESENTATIVE Must be 18 years or older. Must be available after 3 p.m. We are very actively recruiting individuals seeking jobs during this time! We are seeing an increase in business and the need for more individuals to be a part of our team. Come join our team and be a beacon of comfort for your community!! If interested, please apply as well as take this survey to help us understand how better to accommodate you within our team! DOMINO'S PIZZA - ABOUT THE JOB You got game? You got spring in your step? You want the best job in the world! And schedules that work with you, not against you? That's right, we live to beat the rush and make it possible to make, bake or take pizzas during the hungry hours of the day and night, part or full time. You'll have plenty of time left over for school, hanging with your friends, or whatever. Sound good? Even if you just need a second job for some extra cash, Domino's Pizza is the perfect place for you. We are searching for qualified customer service reps with personality and people skills. We're growing so fast it's hard to keep up, and that means Domino's has lots of ways for you to grow (if that's what you want), perhaps to management, perhaps beyond. Whether it's your hobby, main-gig, or supplemental job, drop us a line. We're bound to have just the thing for you. ADVANCEMENT Did you know that 90% of all Domino's Pizza franchisees started working in a store? We are committed to promoting from within. Many of our team members began their careers as Customer Service Reps and today are successful business owners. From CSR to Management, General Manager to Supervisor, Supervisor to Director of Operations or Franchise Owners, our stores offer a world of opportunity! DIVERSITY Our mission is to recognize, appreciate, value and utilize the unique talents and contributions of all individuals. To create an environment where all team members, because of their differences, can reach their highest potential. SUMMARY STATEMENT We take pride in our team members and our team members take pride in Domino's Pizza! Being the best pizza delivery company in the world requires exceptional team members working together. At Domino's Pizza, our people come first! JOB REQUIREMENTS AND DUTIES · Operate All Equipment · Prepare Product to Standard Specifications · Clean Equipment and Facility Daily · Work to a Schedule · Perfect Image and adherence to standards · Great Customer Service · Attendance & punctuality, Transportation to/from work · Store cleanliness · Ability to comprehend and give correct written instructions · Ability to communicate verbally with customers and co-workers to process orders both over the phone and in person · Ability to add, subtract, multiply, and divide accurately and quickly (may use calculator) · Ability to enter information into digital systems using a computer keyboard or touch screen BENEFITS · Systematic Training and Potential Management Development · Flexible Schedule · Meal Discounts · Group Health Insurance (eligibility requirements) WORK CONDITIONS Exposure to · Varying and sometimes adverse weather conditions when removing trash and performing other outside tasks · In-store temperatures range from 36 degrees in cooler to 90 degrees and above in some work areas · Sudden changes in temperature in work area and while outside · Fumes from food odors · Exposure to cornmeal dust · Cramped quarters including walk-in cooler · Hot surfaces/tools from oven up to 500 degrees or higher · Sharp edges and moving mechanical parts TEMPERAMENTS The ability to direct activities, perform repetitive tasks, work alone and with others, work under stress, meet strict quality control standards, deal with people, analyze and compile data, make judgments and decisions. PHYSICAL REQUIREMENTS including, but not limited to the following: · Talking and hearing on telephone · Near and mid-range vision for most in-store tasks · Depth perception · Ability to differentiate between hot and cold surfaces · Standing: Most tasks are performed from a standing position · Walking short distances for short durations · Lifting Bulk product deliveries are made twice a week or more and are unloaded by the team members Deliveries may include cases of ingredients and supplies weighing up to 50 pounds. Cases are usually lifted from floor and stacked onto shelves up to 72" high Qualifications Must be 18 years or older. Must be available after 3 p.m. Must be available to work Saturday/Sunday or every other weekend. Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description THE BUSINESS DEVELOPMENT CENTER REPRESENTATIVE is responsible for maintaining client relationships and identifying customer opportunities. The BDC representative is often the first point of contact for current and potential customers. Some skills that are useful for a BDC agent include: Excellent communication skills, Basic computer skills, A friendly and outgoing demeanor, Ability to work in a technology-oriented environment, and Industry-specific knowledge. ESSENTIAL DUTIES: Essential Duties include the following. Other duties may be assigned. • Greet and welcome customers entering the sales or service reception area, in a genuinely friendly and courteous manner., • Greet and welcome customers calling in for sales or service in a genuinely friendly and courteous manager while directing to the appropriate party or making the customer a service appointment., • Direct the customer to the customer lounge or to the appropriate advisor., • Provide waiting customers updates on completions., • Provide waiting customers with food and/or beverage., • Alert management immediately to any customers in need of assistance., • Work with waiting room clients on leaving positive reviews online (Google, Yelp) during service visit., • Ensure the lounge and service reception area appears pleasing and neat to clients., • Assist the service sales staff in answering overflow status phone calls or simple service questions when advisors are already with clients. (Phone, email or in person), • Using software tools and systems to focus on the needs of current clients including after service satisfaction, appointment rescheduling, contacting special order part clients when parts have arrived, making service appointments, contacting clients who have not utilized their pre-paid maintenance contracts, etc., • Contact those clients and try to get them back into the dealership., • Communication: Handle inbound and outbound calls, and respond to customer website requests, • Data management: Log customer comments and information, and update customer changes in the database, • Communicate with Sales Department when clients in service show interest in replacing their current vehicle or have questions regarding warranty, lease extension, etc., • Attend training classes as directed by management., • Maintains high customer satisfaction standards., • Maintains a professional appearance. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Must pass pre-employment drug test., • Team oriented and works well with fellow coworkers., • Employee discount, • Health insurance Paid time off

Job DescriptionDescription:Job description Position Summary The Final Inspection Supervisor is responsible to lead a team of deburr employees on quality and packaging of all manufactured product at Snyder Industries. Manages shipping/receiving department to ensure correct product is shipping to meet on time delivery targets. Works with internal sales team to prioritize product flow through final inspection. Works with internal quality team on non-conformances found at final. Uses blueprints, excel spreadsheets, reporting, and computer MRP software to meet customer requirements. Requirements: Essential Duties and Responsibilities The essential functions include, but are not limited to the following: · Blueprint reading, GD&T, Excel, ERP systems. · Understand manufacturing processes: Turning, Milling, Gear cutting, and Heat treating. · Works with Quality Manager on non-conformances found in department · Manages final tapping operations · Manages deburr employees · Manages final inspection checklists and visual inspections before packaging products · Performs visual inspection in accordance to customer specifications and ISO 9001:2015 requirements · Utilizes the ship list and working with production analyst to meet delivery needs · Performs diversified deburring and final inspection duties · Operates tools and equipment such as hand grinder, Bridgeport mill, polishing station, and tap tables · Manages shipping/receiving department · Works with engineering team on gauge needs, fixturing, tooling. · Works with quality department with calibration needs · Manages organization of inspection area and raw material warehouse · Complies with safety regulations in all aspects of performing job responsibilities. · Operates computer and enters inspection data · Other Misc. Deburr/Inspection functions Minimum Qualifications (Knowledge, Skills, and Abilities) · Experience and interest in a CNC machining job shop environment · Strong written and verbal communication skills · Attentive to detail; organized · Ability to supervise · Ability to take initiative, to maintain confidentiality, to meet deadlines, and to work in a team environment · Proficient in MS Office Suite (Outlook, Word, Excel, PowerPoint) · Recommend: Understanding of raw materials: castings, forgings, bar stock, plate materials · Recommend: Understanding of CNC turning, CNC milling, Heat treat (carburization, quench & tempering, induction hardening, welding), and gear cutting (Shaping & Hobbing) Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. This position operates within the CMM inspection room and has a heavy presence on the manufacturing floor. Employee will be responsible for looking at all angles of parts in the machine and on pallets. This role routinely uses standard office equipment such as computers, phones, cameras, copiers, and filing cabinets. While performing the duties of this job, the employee is regularly required to stand; walk; use hands; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear. The employee is occasionally required to sit. The employee must lift up to fifty (50) lbs. occasionally. Job Type: Full-time Pay: $30.00 - $34.00 per hour Expected hours: 40 per week Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • 8 hour shift, • Day shift

Job DescriptionSalary: $139,000/year Job Title: Senior ERP LN Technical Analyst Programmer Reports to: Global ERP Manager Pay Rate: $139,000/year Imagine working at the forefront of innovation in fluid-flow technology, with over 1,400 colleagues across the globe, and contributing to a legacy of excellence that spans eight manufacturing facilities on four continents. Armstrong Fluid Technology is more than just a leader in our industry; we are a community of the brightest and most creative minds, driven by a shared mission to engineer the future and safeguard our planet. As part of our team, you'll be immersed in an environment that fosters growth, creativity, and collaboration. Here, you'll have the opportunity to push boundaries, tackle exciting challenges, and develop cutting-edge solutions that promote energy efficiency and reduce environmental impact. Every day offers the chance to make a meaningful contribution to a more sustainable future, driving innovations that help lower global carbon footprints. Together, were creating a legacy that goes beyond businessone thats changing the world for the better. In this role, we are seeking a skilled and detail-oriented ERP LN Technical Analyst Programmer to join our team. The successful candidate plays a crucial role in working to identify technical requirements, streamline programming processes, and ensure the effective Implementation of solutions. As a Technical Analyst Programmer, you will collaborate with key stakeholders to ensure our systems support organizational goals, enhance system efficiency, and contribute to overall business success. Also strong Understanding of System Analysis and ERP Programming, Proficient in LN Application, LN Studio, SQL, Hands on experience in Infor LN Programming. Experience in creating Tables / Indexes / Sessions / Forms / Reports, Experience in DAL / DAL 2 / Extension Scripts, Experience in ION Data Flows, ION Workflows, Development related to ION Integration ad XSLT mapping, Strong SQL and Database management skills. Collaborate between Support, Business and technical teams, Create Interfaces for Infor LN using other tools and languages, Perform debugging and Analytical skills to identify and resolve problems, Integration with third party applications through Web Services. Working Knowledge of IDM / DOM, Should be able to interact with functional leads and make technical designs, Experience in Migration Projects, Experience in working with PMC, ERP LN Job Scheduling and maintenance, Experience in C4Ws configuration of API, Experience in PowerShell Script, JSON, XML, Microsoft Tool, Understanding of Infor Products such as Factory Track, Infor XM, Infor Birst. Key Accountabilities System Analysis, Design, Development, Testing: • To be able to understand the technical requirement of a business process, Analyze and Design technical solution., • Develop and implement advanced technical solutions, Interfaces between systems., • Provide training and support to Junior LN Programmers on standard development methodology and best practices. Process Optimization: • Identify gaps in current processes and recommend solutions leveraging ERP LN technical capabilities., • Drive continuous improvement initiatives to enhance LN Programs and performance and system utilization. Integration & Data Management: • Collaborate with cross-functional teams to ensure smooth integration between LN systems and other enterprise applications., • Maintain data integrity and accuracy across ERP LN modules and integrated products., • Identify, track, and resolve system issues, ensuring timely and effective solutions., • Gather, analyze, and document technical business requirements., • Collaborate with stakeholders (business users, project managers, IT teams) to ensure the proper translation of business requirements into system specifications., • Perform gap analysis to identify system deficiencies., • Propose solutions to optimize business processes., • Create and maintain detailed technical specifications with reference to related system documentation., • Conduct system testing and optimization of programs, executing tests to ensure the final product meets technical specifications and performance criteria., • Provide guidance and support to developers during the design and implementation phases., • Assist with system integration, Data migration., • Serve as a liaison between ERP Business leads and technical teams to ensure project success. What Were Looking For To thrive in this role, you should bring: Education and Experience • Bachelors degree in Computer Science, Information Systems, Industrial Engineering, or related field., • 10-15 years of experience as a Technical Analyst Programmer, Technical Analyst, or similar role., • Experience in facilitating workshops and user training sessions., • Training experience for ERP LN Technical resources (Preferred)., • Experience in a manufacturing environment (Preferred)., • Experience implementing ERP LN CloudSuite (Preferred; must-have)., • This role is not eligible for visa sponsorship. Technical Skills • Strong understanding of ERP LN Technical methodology and ability to translate them into technical system requirements., • Experience with Infor LN product LN10.7, ERP LN CloudSuite., • Strong knowledge of technical programming for Planning, Manufacturing, Warehousing, Quality, Finance and Service, Big Project modules., • Familiarity with making technical analysis and design documents., • Knowledge of system integration techniques and best practices. Soft Skills • Strong analytical and problem-solving skills., • Excellent written and verbal communication skills, including the ability to communicate technical information to non-technical stakeholders., • Ability to work collaboratively in cross-functional teams. Why Armstrong Fluid Technology? By joining us, youll become part of a global community dedicated to pushing the boundaries of fluid-flow technology while upholding Armstrong's commitment to sustainability. Youll have endless opportunities to learn, grow, and make a significant impact on the world. Together, we'll build tomorrows solutions today.

Job Description We are looking for a Manufacturing Engineer to join our growing company. Our customers drive the work we do, and we empower our employees to deliver best-in-class service. As part of our team, you are responsible for identifying new methods, resolving problems, achieving cost savings, and working with internal teams to ensure production runs smoothly and safely. Our ideal candidate has a bachelor’s degree in mechanical engineering or a related field, professional experience within a manufacturing and design environment, and strong problem-solving and math skills. Responsibilities: • Act as the single point of contact to resolve tool-related problems related to manufacturing, • Coordinate with the plant to resolve safety, quality, throughput, or cost issues related to tooling, • Generate and implement cost savings ideas to reduce tool and manufacturing costs, • Manage weekly tooling spend against a variable piece cost budget, • Perform and document tool trials and adhere to customer tool test procedures, • Revise and update tool drawings and documentation as required, • Develop new systems to recondition and re-use tooling when economically feasible, • Attend regularly scheduled operations and team problem-solving meetings, • Assist team in resolving machining and tooling-related issues relating to costs, scrap rates, and low production rates, • Support cross-functional teams to achieve overall plant metrics, • Recommend optimized machining processes and cutting parameters, • Introduce new technology and improved tooling designs, • Provide year over year Cost per Piece reduction plans, • Coordinate with the preset team on proper tool setup techniques, • Maintain PFEP and use PFEP and Top Spend Data to initiate savings projects, • Complete required cost savings and tool test documentation, • Report and document non-conformances, CARs, and continuous improvements, • Maintains safety and good housekeeping standards for the site, • Make decisions within the limits of general standards or procedures, • Report near misses and incidents to the site manager and cooperate with investigations Requirements: • 5 years of experience working in production machining, a bachelor’s degree in mechanical engineering, or experience working in a closely related technical field is preferred, • Prior experience designing and tooling parts in a manufacturing environment, • Strong math and problem-solving skills and ability to read blueprints and schematics, • Proficiency with computers, • Able to work with little to no supervision and ability to multitask, • Strong interpersonal, leadership, and organizational skills, • Paid time off and holiday pay, • Medical, dental, and vision benefits on your 1st day of employment

Job DescriptionSalary: $85,000.00 to $110,000.00 base annually Montante Construction is seeking a Construction Project Safety Manager to join our growing team! If your skills, experience, and passion for safety at the job site align with this position, we would love to hear from you! About Us: Montante Construction is a full-service construction management company led by some of the preeminent construction professionals in the region. Our team helps clients define and manage the scope, schedule, budget, and ultimate completion of new construction projects, building expansions, and the rehabilitation of aging structures into contemporary uses. We utilize our technical knowledge, experience, and resourcefulness to improve efficiency and enhance client value, while providing unprecedented communication and transparency with our clients and project partners. About the Role: The Construction Project Safety Manager is responsible for ensuring safety job sites by managing safety programs, policies, and communication at site stakeholders to ensure a safe work environment on assigned project sites. Reporting to the Safety Manager, this role will work on an assigned project site to help ensure that requirements and reporting are being met according to the projects owner/client. Overnight travel will be required for this role, the current project assignment is in Big Flatts, NY near Elmira, NY , Horseheads, NY and Corning, NY. Safety Management • Enforce safety policies and procedures in accordance with federal, state, and local regulations., • Serve as the primary point of contact and subject matter expert (SME) for all safety-related inquiries and concerns on the project site., • Conduct weekly or as required site inspections and safety audits to identify potential hazards and ensure compliance with safety standards. Document and communicate findings to project teams and VP., • Ensure location is current with site required safety matters, including signage, processes, PPE, and documentation., • Collaborate with Safety Manager, project managers and site supervisors to address safety concerns and develop safety plans. Reviewing and ensuring the implementation of site-specific safety plans., • Investigate accidents and incidents to determine root causes and implement corrective actions to prevent recurrence. Document and communicate findings to Safety Manager., • Present debrief action plans to project teams and use information to inform general training plans., • Stay current with industry safety trends, regulations, and best practices. Data Management, Reporting, and Recordkeeping • Maintain and update company safety documentation, including safety manuals, injury reports and related documentation, OSHA records, boilerplate reports. Experience & Qualifications: • The following are the required experience and qualifications for this role:, • Bachelors degree in occupational health and safety and 3 years of construction safety management experience OR, • 5 years of experience in construction safety management with relevant certifications, including: Certified Safety Professional (CSP), Occupational Health and Safety Technician (OHST), or similar (preferred). OR, • 6 years of construction safety management experience and the OSHA 500 certification, • Ability to travel and stay overnight at job sites throughout NYS as assigned., • In-depth knowledge of OSHA regulations and other relevant safety standards., • In addition to the required experience and qualifications, candidates must possess the following to be successful in the role:, • Strong analytical skills with the ability to identify hazards and implement effective solutions., • Professional and thorough verbal and written communication with the ability to interact effectively with all levels of the organization both interpersonally and in group settings., • Proven ability to manage multiple tasks and prioritize effectively in a fast-paced environment., • Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint). Compensation Package: Montante Group offers a competitive total compensation package including: • Competitive base wages, • A comprehensive benefit package including medical insurance with employer contribution towards premium, medical opt out credit, employer paid life and long-term disability insurance!, • Voluntary Dental and Vision insurance, • Up to 15 days of paid time off (PTO) in year one, increasing with years of service, and paid holidays, • Financial insurance protection options which include short- and long-term disability, accidental death & dismemberment insurance, critical illness and accident insurance,legal and identity theft options, and pet insurance, • 401k Retirement Plan with employer match, • Bonus potential, • Travel compensation and reimbursements, when applicable, • Employee Assistance Program, • Community and Employee engagement events and initiatives

Job DescriptionJob Title: Sr. Human Resources ManagerLocation: Tonawanda, NYHire Type: Direct HirePay Range: $125,000 - $160,000Work Type: Full-timeWork Model: Hybrid (onsite 3-4 days/week)Work Schedule: Monday – Friday, 8am – 4pm Recruiter Contact: Sean Craft, Lubberts, & Scope:Positional OverviewThe Imagine Group is recruiting for an Sr. Human Resources Manager on behalf of our client, a leading employer in Tonawanda, NY. This organization designs and manufactures engineered fastening products like rivet nuts, threaded inserts, specialty fasteners, and installation tools for industries including automotive, aerospace, construction equipment, and general manufacturing. It combines technical engineering support with production, distribution, and customer service to deliver high-quality fastening solutions and automation equipmentIn this role, you will be responsible for aligning business objectives with employees and management in designated business units. The position formulates partnerships across the HR function to deliver value-added service to management and employees that reflects the business objectives of the organization. The HRBP maintains an effective level of business literacy about the business unit's financial position, its midrange plans, its culture and its competition. While the role will be based in the Buffalo metro area, regular travel (minimum quarterly) is required to the headquarters in Danboro, PA. As part of the team, you will enjoy a comprehensive benefits package, including: • PTO, • Holiday pay, • 401K, • Tuition reimbursement, • Medical, Dental and vision insurance, • Company provided technology including Laptop, necessary monitors and hardware for office and home environments, iPhone, etc., • Employee Centric CultureRole & Responsibility:Tasks That Will Lead to Your Success, • Conducts regular meetings with respective company and corporate leaders., • Consults with line management, providing HR guidance when appropriate., • Partner with Talent Acquisition and managers to assess and select top talent into the organization., • Analyzes trends and metrics in partnership with the HR group to develop solutions, programs and policies., • Manages HR information and systems to ensure timely, accurate employee data, time keeping, reporting, and system functionality in support of plant operations and compliance requirements., • Manages and resolves complex employee relations issues. Conducts effective, thorough and objective investigations., • Maintains in-depth knowledge of legal requirements related to day-to-day management of employees, reducing legal risks and ensuring regulatory compliance. Partners with the legal department as needed/required., • Provides day-to-day performance management guidance to line management (e.g., coaching, counseling, career development, disciplinary actions)., • Works closely with management and employees to improve work relationships, build morale, and increase productivity and retention. Designs, implements and manages activities to establish, promote and maintain a high level of employee morale. Organizes and coordinates details for employee related activities and functions. Develop and manage employee relations committee. Manage employee surveys and action plans., • Provides HR policy guidance and interpretation., • Assists international employees with expatriate assignments and related HR matters., • Provides guidance and input on business unit/functional restructures, workforce planning and succession planning., • Identifies training needs for business units and individual coaching needs., • Participates in evaluation and monitoring of training programs to ensure success. Follows up to ensure training objectives are met., • Performs other related duties as assigned. Skills & ExperienceQualifications That Will Help You Thrive, • Excellent verbal and written communication skills., • Excellent interpersonal and customer service skills., • Excellent organizational skills and attention to detail., • Ability to comprehend, interpret, and apply the appropriate sections of applicable laws, guidelines, regulations, ordinances, and policies., • Ability to acquire a thorough understanding of the organization’s hierarchy, jobs, qualifications, compensation practices, and the administrative practices related to those factors., • Excellent time management skills with a proven ability to meet deadlines., • Strong analytical and problem-solving skills., • Proficient with Microsoft Office Suite or related software., • Minimum of 8 years of experience resolving complex employee relations issues., • Working knowledge of multiple human resource disciplines, including compensation practices, organizational diagnosis, employee and union relations, diversity, performance management, and federal and state respective employment laws., • Bachelor’s degree preferred., • SHRM Certified Professional (SHRM-CP) or SHRM Senior Certified Professional (SHRM-SCP) credential or ability to obtain certification within one year of employment

Job DescriptionSalary: $65,000-$75,000/year Job Title: Buyer About the company: Since 1965, Armstrong Fluid Technology has proudly operated in North Tonawanda, NY. We are globally recognized as pioneers and leaders in designing, engineering, and manufacturing advanced fluid-flow equipment. Our expertise spans HVAC, Hydronics, and Fire Systems, making us a key player in driving innovation and excellence in the industry. Join us to be a part of a team that shapes the future of intelligent fluid technology. Imagine working at the forefront of innovation in fluid-flow technology, with over 1400 colleagues across the globe, and contributing to a legacy of excellence that spans eight manufacturing facilities on four continents. Armstrong Fluid Technology is more than just a leader in our industry; we are a community of the brightest and most creative minds, driven by a shared mission to engineer the future and safeguard our planet. As a member of our team, you'll dive into an environment that encourages learning and boundary-pushing every day. You'll be part of an agile and dynamic workplace where today's solutions are built for tomorrow's challenges. Job Summary: As a Buyer, you will play a crucial role in coordinating and expediting material flow from suppliers to align with our production and shipping schedules. Your efforts will be key to enhancing customer satisfaction by identifying, escalating, and resolving issues promptly, all while striving to exceed quality expectations. Reports to: Materials Manager Pay rate: $65,000-$75,000/year Key Responsibilities: Sourcing • Review and monitor supplier on-time performance, implementing corrective actions as needed., • Maintain optimal inventory levels to ensure timely deliveries., • Assist in developing and executing cost reduction programs., • Negotiate with suppliers for cost, quality, and delivery improvements., • Process Non-Conformance Notifications (NCNs) and vendor returns., • Collaborate with Production, Engineering, and Quality teams to assess supplier quality. Purchasing • Initiate and oversee purchase contracts for assigned suppliers., • Analyze reports on Purchase Price Variance (PPV)., • Review inventory levels of materials/products at other locations., • Explore methods to reduce lead times., • Meet with vendors to address and resolve issues., • Respond to customer and production requests within four hours. What Were Looking For: Education and Experience • Bachelor's degree in supply chain management, business administration, or a related field., • 5 years of demonstrated experience in materials planning, inventory management and order fulfillment ideally in an industrial/automotive/aerospace manufacturing environment., • This role is not eligible for visa sponsorship. Technical Skills • CPM or CPIM certification (or equivalent) preferred., • Strong analytical skills with proficiency in data analysis and forecasting techniques., • Excellent understanding of materials planning and inventory management principles., • Must be proficient in using inventory management software, enterprise resource planning (ERP) systems, ideally LN or similar such as SAP, CMS etc., • Must be proficient with Microsoft Office with advance data organization and analytics capabilities in Excel. Soft skills and other requirements • Excellent communication and collaboration skills to work effectively with diverse stakeholders., • Detail-oriented with strong organizational and problem-solving abilities., • Ability to work in a fast-paced environment and handle multiple priorities simultaneously., • Knowledge of lean or Six Sigma methodologies is a plus. Benefits: • Medical/Dental/Vision Insurance on the first day of employment, • 401k match up to 5%, • Paid Holidays, • Paid Time Off, • Employee Assistance Program (EAP), • Annual safety shoe and safety glasses reimbursement Why Armstrong Fluid Technology? By joining us, youll become part of a global community dedicated to pushing the boundaries of fluid-flow technology. Youll have endless opportunities to learn, grow, and make a significant impact on the world. Together, we'll build tomorrows solutions today.

Job DescriptionCompany Description About Veolia North America A subsidiary of Veolia Group, Veolia North America (VNA) offers a full spectrum of water, waste and energy management services, including water, and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has approximately 10,000 employees working at more than 350 locations across the continent. Please visit our website . Job Description Position Purpose: Provides day-to-day monitoring of utility plant operations, lab tests and corrective, predictive and preventative maintenance activities. Primary Duties/Responsibilities: • Operates equipment manually and through instrumentation panels, computer terminals and programmable logic control units following process control procedures. Monitors and observes operating conditions, records observations and data in shift log. Diagnoses basic operational problems and takes corrective action per procedure., • Performs CLAIR (cleaning, lubrication, adjustment, inspection and minor repair) on machines and related equipment which may include pumps, valves, gates, mixers, conveyors, compressors, dryers, chemical feed, boilers, and chillers. Reports and documents results of work performed and enters into appropriate database., • Promptly reports any operational problems with machines or equipment to Lead Supervisor / Asset Manager / Project Manager., • Troubleshoots mechanical, hydraulic or pneumatic equipment to determine repairs needed. Dismantles equipment to gain access to and repairs defective parts using hand tools, power tools and precision measuring and testing devices. Re-assembles and tests equipment ensuring safe and efficient operating condition is restored., • Collects water and wastewater samples according to schedule. Performs field tests in order to pace chemical dosages for process and odor control units. Prepares chemical solutions, monitors supplies and recommends reorder., • Performs lab tests and prepares reports per procedure. Analyzes parameters including pH, alkalinity, chlorine residuals and other tests as required., • Performs maintenance on lab and field equipment and instrumentation including pH meters, specific ion meters., • Changes and cleans probes, magnetic strips, floats and sensors on instrumentation., • Performs instrument calibration, including resetting of set points as assigned., • Performs facility maintenance and repair and may replace or install light bulbs, florescent tubes, and paint., • Performs manual labor including cleaning equipment, facilities and grounds as required and properly disposes of waste according to safety and environmental policies., • Spends 100% of time in operations / light maintenance environment., • Typically spends 5 – 10% of time exposed to outdoor and sometimes inclement weather., • Required to work on rotating 7/24 shift schedule., • Possible Work Hazards: May be exposed to possible operations hazards including fumes, dust, toxic and caustic chemicals, noise, rotating machinery, high pressure and hot and cold temperatures, slippery surfaces, water and electrical hazards. Qualifications Education/Experience/Background: • High school or GED with the ability to read, write and comprehend English (operational, process, safety and quality instructions) and be able to carry out verbal and written instructions., • Ability to perform basic mathematical calculations., • Must demonstrate proficiency in the care and use of all site specific, facility required PPE (Personal Protection Equipment), including respirators, etc., • Must consistently demonstrate the ability to perform all assigned tasks in an accurate and timely manner., • Must demonstrate ability to efficiently operate and perform minor PM’s on a variety of equipment which may include pumps, valves, mixers, chemical feed equipment, boilers, compressors, and chillers., • Knowledge of HOA (Hand – Off – Auto) operational controls and how settings apply to operational control scheme., • Must have the ability to diagnose mechanical and process problems in multiple unit processes, troubleshoot mechanical, electro-mechanical, hydraulic or pneumatic equipment and take corrective action within policy and procedure limitations., • Good verbal and written communication skills are necessary., • Must be able to work a 12-hour shift rotation, 7/24 shift schedule (Dupont Schedule). Must be able to cover OT shifts as required., • Some vocational training and mechanical aptitude required, with the ability to read, interpret and record data from meters, gauges, scales, panels, computer consoles and other equipment., • Must have or be able to obtain a Class 2 New York Boiler License as required by regulatory agency at site within 6 months of start date., • Works in various positions; works on ladders, catwalks, and supports at heights of 30 feet above the ground; and works with hands extended above and below head and body up to 40 minutes using hand tools weighing up to 15 pounds., • Must be able to lift and carry 50 pounds (occasionally 60 pounds) distances of 50 feet., • Occasional stooping, bending or kneeling and entering confined spaces., • Required to turn valve handles and wheels on valves., • Required to use shovels for snow removal or material transfer. Must be able safely drive a powered industrial forklift. Additional Information Pay Range: $28.00 to $33.00 per hour. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

DataAnnotation is committed to creating high-quality AI. Benefits: This is a full-time or part-time REMOTE position You’ll be able to choose which projects you want to work on You can work on your own schedule Projects are paid hourly starting at USD $50-$60 per hour, with bonuses on high-qual

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies.We guarantee 15-25 hours per week with an hourly pay of between $25/hr.There is no payment required in order to apply or to work as an In-Home Usage Tester.You do

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies.We guarantee 15-25 hours per week with an hourly pay of between $25/hr.There is no payment required in order to apply or to work as an In-Home Usage Tester.You do

DataAnnotation is committed to creating high-quality AI. Proficient in financial analysis, financial modeling, data analysis, and other reasoning exercises related to finance management.

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies.We guarantee 15-25 hours per week with an hourly pay of between $25/hr.There is no payment required in order to apply or to work as an In-Home Usage Tester.You do

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies.We guarantee 15-25 hours per week with an hourly pay of between $25/hr.There is no payment required in order to apply or to work as an In-Home Usage Tester.You do

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies.We guarantee 15-25 hours per week with an hourly pay of between $25/hr.There is no payment required in order to apply or to work as an In-Home Usage Tester.You do

Lead a global finance transformation program enabling AI-ready, cloud-based data capabilities. Coordinate cross-functional teams across Finance, Technology, and Data to deliver key workstreams. Experience with cloud adoption and data migration initiatives (e.

Understands the broader data & AI ecosystem and can articulate differentiation versus other data warehouses, data lake/lakehouse platforms, and analytics tools. Proven experience architecting and delivering data management, analytics, or data science solutions in one or more of the following are

Familiarity with data modeling, business architecture, or basic scripting.

Join Our Team as a Work-From-Home Data Entry Research Panelist!. Are you ready to earn money from the comfort of your own home? This exciting opportunity is perfect for anyone with a variety of skills and backgrounds whether you've been an administrative assistant, data entry clerk, typist, custome

Join Our Team as a Work-From-Home Data Entry Research Panelist! Are you ready to earn money from the comfort of your own home? This exciting opportunity is perfect for anyone with a variety of skills and backgrounds whether you've been an administrative assistant, data entry clerk, typist, customer

Both PT & FT Available - As a Data Entry Specialist you'll: Enter appropriate credits for each song; Transcribe, review, edit, and add the lyrics; Assist in adding all information needed for music publishing utilizing various databases; Create, assign, and place ISRC codes for each song in the reper