Trabajos maintenance en Wilmington, North Carolina - Page 2Crear alertas

Job Description Responsibilities Are you an Experienced Mobile Diesel Technician looking for an opportunity to work for a leader in the commercial truck industry? We are searching for tenured & certified technicians to support our customers! Our Mobile Diesel Technicians are responsible for maintaining the fleet for clients and to handle service calls at client locations, so we can provide expedited expertise directly to our customer's trucks & equipment on site. Rush Truck Centers opens the door to the world of opportunity. We are the largest network of commercial vehicle dealerships across the US representing truck and bus manufacturers. Our franchises include Peterbilt, International, Hino, Isuzu, Ford, IC Bus and Blue Bird. We offer a rewarding career as a leader in the transportation industry. Grow with us as we continue to expand our network of locations and services. Responsibilities: • Maintain all aspects of equipment according to company standards., • Handle basic maintenance of the truck including filling tank with fuel, checking oil, keeping it clean, and making sure required inspections are performed and documented as assigned., • Manage inventory control on the service truck and for keeping the vehicle properly stocked., • Report to the Service Manager and will be assigned duties on a daily basis., • Maintain availability for after-hours service calls and be available for an open work schedule., • Maintain and inventory the supplied tools for the work required in maintaining diesel engine trucks and associated equipment, • Read job order and observes and listens to vehicle in operation to determine malfunction and to plan work procedures., • Utilize various diagnostic equipment to determine malfunction and utilize available technical information to determine and perform correct repair procedure., • Diagnosis, removal and replacement of injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, changes or recharges batteries, and replaces transmissions and other parts., • Perform all necessary diagnostic and documentation functions on the company computer system., • Examine protective guards, loose bolts, and specified safety devices on trucks, and makes adjustments., • Lubricate moving parts and drives repaired vehicle to verify conformance to specifications., • Perform preventative maintenance work as requested., • Document and submit necessary paperwork or enter into mobile service program as work performed in an accurate and timely manner., • Respond to customer inquiries regarding the work. Foster positive customer relations., • Advise customer and/or service writer of any repairs or services which should be performed within the next 3 months., • Participate in training and utilize that training in the course of work. Benefits: * We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Basic Qualifications: • High school diploma or general education degree (GED)., • 5 years' experience as a Class 7 & 8 technician in a dealership or related truck service facility, • Current CDL preferred but not required., • Medical card as required by the FMVS., • Mechanical aptitude and technical ability is a must., • Peterbilt, International, Ford, Hino, Isuzu, Cummins, & ASE certifications are preferred & rewarded Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job Description ABOUT OUR ROLE The Engineer II will perform general maintenance and repairs for assigned equipment and facilities including plumbing, electrical, basic carpentry, heating and cooling, and other building systems. The Engineer II must work efficiently with minimal supervision and have a willingness to work as a team. ABOUT OUR VALUES We believe in guiding the adventure, saying yes to possibilities, and working together as one team. With excellence at our core and a touch of magic in every detail, we create experiences that are authentic, elevated, and unforgettable. ESSENTIAL FUNCTIONS • Maintain security and safety of all job sites and work areas for self, fellow workers, staff, guests, and any other person(s) possibly affected during performance of assignments., • Completes daily inspections and maintenance on assigned buildings and rooms., • Repairs plumbing, electrical, basic carpentry, heating and cooling, and other building systems as directed., • Repair door locks to maintain building and/or room security per risk management standards., • Repair Inspects room A/C filters on a regular schedule and determines if cleaning or replacement is warranted., • Verifies accuracy of records for inspections and preventative maintenance work executed., • Support keeping equipment in good working order. Minimum Qualifications: • A valid driver’s license., • At least 3 years’ experience in general maintenance., • Intermediate understanding of electrical, carpentry, painting, and plumbing., • Experience in any other trades such as vehicle maintenance, welding, machine operation, etc. a plus., • High level of professionalism, able to follow instructions with follow-up, respect, and integrity., • Understand oral and written communications, follow detailed directions, and provide clear instructions/directions., • Basic skills such as: attention to detail skills, reasoning skills and multi-tasking and prioritization skills. REQUIREMENTS • Ability to lift and carry 50 lbs., • Ability to climb and work from a ladder up to 40 feet from ground level. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to fingers, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl through; talk or hear; and taste or smell. The employee is occasionally required to sit. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. ABOUT OUR BENEFITS Company Benefits and Perks Full Time Part Time Seasonal Medical (with company contribution) Eligible Dental (with company contribution) Eligible Vision (with company contribution) Eligible Paid Time Off Eligible 401(k) (with company match) Eligible Eligible Sick Time Eligible Eligible Employee Dining Discounts Eligible Eligible Eligible Employee Marketplace Discounts Eligible Eligible Eligible SCHEDULE Hospitality demands a flexible schedule that may require extended hours as the business requires coverage including seasonality– on any day at any hour, including evenings, weekends, and holidays. PAY RATE $20.00/hour JOB STATUS Regular Full Time FLSA Non-Exempt EQUAL EMPLOYMENT OPPORTUNITY Trailborn is an Equal Opportunity Employer. We celebrate diversity and are committed to fostering an inclusive and supportive workplace for all employees. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, genetic information, or any other protected status under applicable federal, state, or local laws. If you require assistance or an accommodation due to a disability, please inform us during your application process. The specific statements shown in each section of this Job Description are not intended to be all-inclusive. They represent typical elements and criteria considered necessary to perform the job successfully. The job’s responsibilities/tasks may be modified and/or expanded over time without prior notice. The Company will try to give as much notice as practical when changes are made.

Job Description Audi Cape Fear is seeking an experienced Automotive Service Advisor to join the team. This position requires exceptional customer service skills with a passion for the Automotive industry. The primary role of this position is to act as the liaison between the customer and service technicians and provide recommended repairs and service for the customers. The successful candidate will have a commitment to above-and-beyond customer service and a keen eye for detail. The Automotive Service Advisor will be responsible for creating a comfortable and enjoyable customer experience. Responsibilities • Greet customers promptly and create an enjoyable customer experience., • Handle customer inquiries about service and repairs., • Receive repair orders and ensure that the customer completely understands the cost and timeline of the work to be performed., • Assist with scheduling appointments., • Review customer invoices before payment is due., • Generate and complete service paperwork., • Provide feedback on maintenance and repair suggestions to management., • Maintain awareness of current promotions and specials., • Answer phones and respond to emails in a timely manner., • Provide a professional, positive and personable customer experience., • Promote customer loyalty through customer service delivery.Requirements, • Bachelor's Degree and/or 3+ years of experience in the Automotive industry., • Excellent customer service skills with a personable demeanor., • Ability to comprehend and explain complex service information., • Knowledge of vehicle maintenance and repair., • Ability to work in a fast-paced environment., • Strong problem-solving and communication skills., • Excellent organizational, time management, and multi-tasking skills., • A valid driver’s license.

Job Description Service Advisor Location: Harley-Davidson – Wilmington, NC Are you ready to take your career to the next level? Do you want to be a part of the winning team? Looking for a change of scenery? Our family of Harley-Davidson dealerships represents a multi-point dealership family situated in the Southeast and Mid-Atlantic regions. We are a well-established award-winning family of dealerships who takes pride in offering superior customer service and hiring experienced, knowledgeable team members. Our Harley-Davidson dealership is now accepting applications for full-time self-motivated Service Advisors who possess a customer-focused attitude. An Equal Opportunity Employer Benefits: • 401K, • Paid Vacation & Holidays, • Medical, Dental, Vision, Life, Cancer, Accidental, and Disability Insurance, • Health Flexible Spending Account, • Company Discounts, • Become skilled at assessing Harley-Davidson© motorcycles for repair, customization, performance and maintenance, etc., • Estimate costs and completion times of service work, and clearly communicate them to the customer, notifying the customers of any changes, delays, or additional work needed., • Open & close all customer paid, warranty, and internal repair orders., • Strategically assign jobs to technicians based on skill level and project schedule., • Review work-in-progress to ensure quality and timeliness., • Handle all scheduling of customer appointments and follow up calls., • Perform cashier functions, as needed., • Assist in maintaining a smooth-running efficient service department with a high degree of customer satisfaction., • Promote additional services by communication of service specials or additional work needed., • Knowledge of Harley-Davidson motorcycle servicing a major plus., • Technical repair education through Motorcycle Mechanics Institute or UTI also a major plus., • Exceptional customer service skills and attention to detail are a necessity., • Past experience as a Service Advisor or Service Consultant go to the top of the list All statements made by applicants for employment during the application will be checked for accuracy. We offer equal employment opportunities to all qualified persons without regard to race, color, sex (including gender identity and sexual orientation), religion, age, national origin, genetic information, citizenship status, marital status, pregnancy (including childbirth, related medical conditions, and lactation), physical or mental disability, past, present, or future service in the Uniformed Services of the United States, or any other basis prohibited by local, state, or federal law. If you need help to fill out this application form or during any phase of the application, interview, or employment process, please notify the Human Resources Officer to discuss accommodations. The use of this form does not mean there are positions open and does not obligate us in any way.

Job Description Job Title: Marine Canvas and Upholstery Assistant Company: YachtSource Location: Inlet Watch Yacht Club Position Type: Full-Time About Us: YachtSource is a reputable and well-established marine canvas and upholstery company dedicated to providing high-quality interior and exterior upholstery and canvas services for boats and yachts of all sizes. We take pride in our craftsmanship and commitment to customer satisfaction. We work with the highest quality marine fabric as well as isinglass so your new product(s) will withstand the sun, salt and sand. As we continue to grow, we are looking for a Boat Fabricator Assistant to join our team and contribute to our success. Job Description: We are seeking a Boat Fabricator Assistant who is passionate about boats and has a strong desire to learn and grow within the marine upholstery and canvas industry. In this role, you will work closely with our experienced boat upholsterer to assist in the creation and installation of custom boat upholstery. You will assist in creating Full Boat Covers, Custom Console and Station Covers, Replacement and Custom Cushions, Enclosures, Bimini Tops, Curtains and more. You will have the opportunity to gain hands-on experience, develop valuable skills, and play a crucial role in delivering exceptional products to our clients. Key Responsibilities: • Assist boat upholsterers in fabricating, repairing, and installing boat upholstery and canvas., • Prepare materials and tools for canvas and upholstery projects., • Help maintain a clean and organized workspace., • Learn and follow safety guidelines and best practices., • Collaborate with team members to ensure projects are completed efficiently and to high-quality standards., • High school diploma or equivalent., • Strong attention to detail and a willingness to learn., • Interest in boats and marine upholstery and canvas preferred., • Basic knowledge of upholstery tools and materials is a plus., • Excellent communication and teamwork skills., • Ability to follow instructions and work under supervision., • Competitive hourly wage., • Accrued Paid Time Off., • Medical, Dental, Vision, Short-term disability, and life insurance., • Opportunity for skill development and career growth., • Supportive and collaborative team environment. If you are passionate about boats and upholstery, and you're eager to start your career in the marine upholstery industry, we'd love to hear from you. Please apply directly to this posting with a current resume to be considered. YachtSource is an equal opportunity employer. We encourage applications from candidates of all backgrounds and experiences. Join our team and embark on an exciting journey in the world of boat upholstery! We look forward to welcoming a dedicated and enthusiastic Boat Fabricator Assistant to our crew. Company DescriptionYachtSource began as a yacht charter company but has now added on a boat maintenance, service, canvas, and upholstery division. We provide excellent customer service, timely response and know how to get the job done! We are growing fast and are looking for a new member to add to our team!YachtSource began as a yacht charter company but has now added on a boat maintenance, service, canvas, and upholstery division. \r\n We provide excellent customer service, timely response and know how to get the job done! We are growing fast and are looking for a new member to add to our team!

Job Description Diamond Landscape Services is a Commercial Landscape Company providing ground maintenance, landscape design and installation, drainage and erosion control, tree and shrub care, and much more! We are currently in need of reliable, hardworking individuals to join our team. General knowledge of landscaping and of the operation of equipment and tools is required. Responsibilities and Qualifications: • Landscaping Machines and Skills and knowledge, • Hardworking and able to work in all conditions., • Aeration, • Weed Eating and Edging Beds with Weed Eater, • Trimming and Pruning, • Must have knowledge of driving pickups and trailers, • Must have reliable transportation and on time We are looking for a Landscape Driver. We need a valid driver's license and a clean driving record. Must have 3 years driving experience and at least 2-year commercial landscape experience. If you have what it takes to become a member of our company, then we would love to hear from you. Please respond with a resume or a detailed list of your work history for review. Thank you! **Compensation: Will be discussed at the interview, depending on knowledge and experience.

Job Description Position Summary: Responsible for the maintenance of all airport buildings and grounds as well as routine repairs to airport facilities and equipment. This will include custodial work. Reporting Relationships: • Reports to: Shift Supervisor or designee, • Supervises: No direct reporting relationship Essential Functions: • Maintains all required training and cleaning/mowing skills required by a Maintenance Technician I., • Performs the following skilled tasks without supervision: Strips, waxes and buffs floors, shampoos carpeting, paints interior and exterior areas., • Performs routine maintenance on small appliances to include small and large vacuums, shampoo machines, riding mowers, restroom flush valves and paper towel dispensers., • Assists with major projects and repairs as directed. Tasks may include the following: sheet rock repairs and installation of new walls, repair and replace bag belt components, replace and/or repair water lines and mechanical system components and airfield pavement repairs., • Maintains knowledge to checks chillers, mechanical systems, smoke detectors and fire alarms to insure they are always maintained and in good working order. Will report those systems that are not working., • Performs custodial duties to maintain the appearance and cleanliness, and a safe (injury free) environment in the airport terminals, airlines operation buildings, business park and any other buildings assigned or owned by ILM. This includes dust mopping, wet mopping floors; emptying trash; Vacuuming carpets; cleaning elevators, stairwells, break rooms and locker rooms; cleaning offices and closets; dusting headers and vents; Will perform these responsibilities in a satisfactory manner that is within required time frames and established procedures., • Replaces light bulbs as needed throughout terminal and other buildings as required., • Understands all internal as well as external airport customers, knows who they are, and anticipates and meets their expectations through quality service in accordance with the airport Mission, Values and Vision., • Responds to tenant needs as required in a timely, user-friendly manner., • Carries out all responsibilities as an efficient and effective airport team player., • Performs all duties as assigned in a compliant and motivated manner. Willingly attempts to improve performance and/or correct deficiencies., • Completion of Airfield Driver Training Other Important Functions: • Primary Contacts: Management, Shift Supervisor/Charge Person, employees, tenants, aviation representatives, passengers, and the public., • Physical Demands: Some exposure to aircraft noise and fuels, daily contact with chemicals, fumes, electric shock, and moving mechanical equipment. Position requires much standing, walking, bending, reaching, pulling, and lifting (up to 100lbs). Exposure to inclement weather., • Working Conditions: Works both inside and outside in extreme hot and cold weather. Work hours routinely up to 40 hours in a standard workweek. Must be willing to work weekends, holidays, and any shift as required. Due to nature of responsibilities, may require longer work hours to complete assignments or for emergencies. Qualifications: • Education/Knowledge: High School diploma. Must possess a valid North Carolina Class “C” driver’s license with an acceptable driving record and the ability to maintain insurability by ILM. Must also be qualified to obtain a Class “A” North Carolina driver’s license., • Experience: Experience in custodial, facility maintenance required., • Skills/Aptitudes: Must possess the ability to understand and follow oral and written instructions and effectively communicate both orally and in writing., • Promotion Opportunities: Eligible for promotion to Maintenance Technician III upon demonstrating proficiency with specific maintenance repair tasks and duties of this position. Job Type: Full-time Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Employee discount, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Retirement plan, • Tuition reimbursement, • Vision insurance Experience: • Maintenance: 4 years (Required) Ability to Commute: • Wilmington, NC 28405 (Required) Ability to Relocate: • Wilmington, NC 28405: Relocate before starting work (Required) Willingness to travel: • 25% (Preferred)

Job Description About Landing Since 2019, Landing has built the largest flexible living network in the country - 35+ markets, thousands of apartments, no deposits, no hassle. We're growing fast and operating in the real world, which means things move quickly, priorities shift, and no two days look the same. About the role This is a market segment ownership role. You will manage a segment of our properties in Wilmington Market - member experience, property relationships, housekeeping vendors, maintenance, unit quality, and everything in between. You will oversee reservations made through Landing’s platform as well as OTA partners like Airbnb and Booking.com , build relationships with property partners, resolve member issues across multiple channels, and report on market performance to your Hub Manager. If you've run or worked in a hotel, a short-term rental portfolio, or a high-volume hospitality operation, you already know what this job feels like. The difference here is that you own the whole market segment, not just one property - and the playbook is still being written. This role is for someone who thrives when things are moving fast, makes decisions with incomplete information with the best customer experience in mind, and builds systems while using them. What you'll own • Reservation management across direct and OTA channels — including Landing bookings and platforms like Airbnb and Booking.com, • Member experience from booking through checkout - tickets, inquiries, escalations, • Property and housekeeping partner relationships, • Market KPIs: NPS, CSAT, cleaning quality, growth, • Reservation coordination and maintenance escalation with property management teams, • Background in hotel operations, short-term rental management, vacation rental portfolio management, or high-volume hospitality - you know how to operate when guests don't wait, • Experience running a market, property, or operation with real autonomy - not just executing someone else's decisions, • Strong organizational and follow through skills - tickets don't resolve themselves and this role has a lot of them, • Ability to triage under pressure - three things are urgent at once, you know which one to move on first Core business hours for this role are Monday- Friday, 8am-5pm. As a guest-facing position, additional availability is required, including evenings, weekends, and holidays, based on business needs. These needs may increase during peak periods, such as month-end and high-volume check-in times. What we offer • Opportunities for upward mobility - we want you to grow with us! Our management team in Field Operations is built from internal promotions., • Competitive compensation: $55,000–$75,000 base salary (based on experience) + performance bonus of up to 20% of base salary + $6,600 annual vehicle and cell stipend, • Stock Options, • Comprehensive benefits package: Medical, dental, vision, life, AD&D, disability, mental health, pet, commuter benefits, and FSA or HSA options, • Retirement support: 401(k) plan + access to ImmediatePay, • Generous paid time off policy to support work-life balance Powered by JazzHR i2MiGdrSVN

Job Description Overview Diesel Technician/Mechanic – Wilmington, NC. $28.00 - $33.00 hr | Weekly Pay | Full Benefits within 30 Days Amerit Fleet Solutions, a leader in fleet maintenance across the U.S., is hiring a skilled Diesel Technician/Mechanic to join our team in Wilmington, NC. If you enjoy troubleshooting mechanical issues and keeping fleet vehicles running reliably, this is a great opportunity to grow your career with a stable national company. Pay & Schedule Pay: $28.00 – $3.00/hour (based on experience) Pay Frequency: Weekly pay – every Friday Schedule: Monday - Friday: 8:00am - 4:30pm Why Technicians Choose Amerit ✔ Weekly Pay – Reliable paycheck every Friday ✔ Benefits Start Fast – Medical, dental, vision within 30 days ✔ 401(k) Match – Plan for your future ✔ Paid Time Off – Vacation, holidays, and sick time ✔ Boot Allowance & Safety Gear Reimbursement ✔ Training Through Amerit University ✔ ASE Certification Reimbursement & Bonuses ✔ Employee Referral Bonuses (Up to $500) ✔ Career Advancement Opportunities Nationwide What You’ll Do • Perform preventive maintenance and repairs on heavy duty fleet vehicles, • Diagnose mechanical and electrical issues, • Conduct inspections to ensure vehicles meet safety and compliance standards, • Accurately document repairs and complete work orders, • Maintain a clean and organized work area, including your tools and equipment, • Follow all safety procedures and company policies, • 5+ years’ of hands-on experience performing diesel vehicle maintenance and repairs, • Strong diagnostic and troubleshooting skills, • Valid driver’s license, • Ability to own and maintain the personal tools and toolbox required for the role, • Ability to work effectively both independently and as part of a team, • Willingness and ability to meet the physical demands of the position (detailed below) Ready to Join a Growing Team? Apply today to join Amerit Fleet Solutions and build a career with a company that values safety, reliability, and skilled technicians. #Mechanic #Hiring #DieselMechanic #NowHiring #DieselTechnicianCareer #MechanicJobs #DieselTechnician INDTC

Job Description Overview Are you looking to jumpstart a rewarding career in the fast-growing telecommunications industry? Our Fiber Technician Apprenticeship Program is designed to equip aspiring professionals with the hands-on skills, technical knowledge, and industry insights needed to succeed as a fiber optic technician. This comprehensive program offers a unique opportunity to learn from experienced professionals, gain real-world experience, and build a solid foundation for a long-term career in telecom. Successful completion can lead to full-time employment and opportunities for advancement into leadership roles within the rapidly expanding fiber optics and telecommunications sector. Program Highlights • Hands-On Training: Learn installation, maintenance, and troubleshooting of fiber optic systems in diverse environments., • Technical Skill Development: Gain expertise in using testing equipment, tools, and techniques critical to fiber optic technology., • Mentorship & Support: Work closely with experienced technicians and supervisors to develop industry-specific skills., • Career Growth Opportunities: Progress from foundational technical roles to leadership or specialized positions as your skills grow., • Industry Relevance: Prepare for an in-demand career in telecom, a field experiencing rapid expansion and ongoing technological innovation. Requirements Ideal Candidate Requirements • Motivated individuals, preferably veterans or transitioning military members, seeking a career in telecommunications., • Strong mechanical aptitude and interest in technology., • Willingness to learn, work safely, and develop expertise in fiber optics., • Excellent problem-solving skills and ability to work independently or as part of a team., • Ability to work in a variety of environmental conditions and lift up to 50 pounds., • Ability to work full-time with primarily weekday hours. Weekend and overtime availability may be required based on project needs., • High school diploma or GED required., • Willingness to travel to different job sites as needed, which may include several weeks at a time to non-local markets., • Valid driver’s license Benefits Available Benefits*: • Company truck, • Health Insurance, • Flexible schedule, • Fuel card, • On-the-job training, • Opportunities for advancement, • Paid time off, • Paid training, • Certain benefits become available upon successful completion of the 90-day probationary period.

Job Description Master Machining, Inc. CNC Machinist – 1st & 2nd Shift Opportunities | Join Our Growing Team About Us Proudly serving our clients for over 40 years, we continue to expand thanks to long-term contracts and a reputation for precision and reliability. As we continue to grow, we’ve invested in brand-new, state-of-the-art machines and are expanding our team with skilled professionals who take pride in craftsmanship, innovation, and quality. If you’re looking for a place where your expertise is valued, your ideas matter, and your work makes a real impact, we’d love to have you on our team. Why Master Machining? At Master Machining, we’re more than just a workplace, we’re a family. You’ll be surrounded by experienced machinists who take pride in mentoring others, leaders who value your input, and an environment built on respect, teamwork, and precision. With new equipment, competitive pay, and a supportive culture, you’ll have everything you need to build a rewarding career. What We Offer • Competitive hourly pay from $26–$40/hr, based on experience, • Consistent 40–50 hour work weeks with overtime available, • 401(k) with company match after one year of service, • Quarterly “Earned Days” program – earn paid time off for consistent attendance, • Yearly reviews, • Paid birthday off every year Health & Wellness • Medical insurance (company pays up to $460/month toward individual coverage), • Option to decline coverage and receive an additional $1.65/hour in pay, • Dental and vision coverage available Time Off & Recognition • 8 paid holidays, plus Veterans Day off (with pay) for all who served, • 40 hours paid vacation after one year, increasing with tenure, • Catered Veteran’s Day lunch to honor our military team members, • Opportunities for long-term growth and cross-training Your Role As a CNC Mill Machinist, you’ll help bring precision designs to life through setup, programming, and operation of CNC milling machines. You’ll work with high-quality materials and tight tolerances to meet the exacting standards that define Master Machining. Every part you produce contributes to our legacy of quality and customer satisfaction. Your Responsibilities: • Program, set up, and operate various CNC milling machines, • Verify parts meet print specifications using precision measuring instruments, • Read and interpret blueprints, job tickets, and technical drawings, • Perform routine maintenance and tool adjustments on machines, • Load and accurately indicate parts to fixtures, • Monitor tool wear, load new tools and inserts as required, • Collaborate with the team to meet production goals and ensure quality output What We’re Looking For: • 3–5 years of CNC milling experience, • Strong understanding of G-code programming and machine setup, • Ability to work within very tight tolerances, • Skilled in blueprint reading and use of measuring equipment, • Excellent work ethic and commitment to precision and quality, • Ability to stand for long periods and work in a fast-paced environment, • Willingness to work overtime or Saturdays when needed Current List of Our Machines: • Haas ST-40 4" Bar, 25.5" Chucking, • Doosan TT2100SYYB 3" Bar, 9" Chucking, • Twin Turret with Bar Feeder, • Mori-Seiki Fronteir LII 10" x 24" • Haas SL-10 with Bar Loader, 1-5/8" capacity, • Tsugami-TMA8F Multi Axis Turning Center with Bar Feeder, • Tsugami-M08SY Live Tooling & Sub Spindle with Bar Feeder (3), • Tsugami-M08SY Live Tooling and Sub Spindle with Gantry Loader • Haas VF 2 SS w/4 axis (3) 30" x 16" x 20", • Haas VF 3 SSYT w/4 axis (2) 40" x 26" x 25", • Haas VF 3 SSYT w/5 axis (2) 40" x 26" x 25", • Haas VF 10 32" x 120" x 30", • Haas EC-400 PP Horizontal 6 Pallet Pool 22" x 25" x 22, • Timemaster Super AT Lathe 40" x 120", • Clausing-Metosa Engine Lathe 24" x 108", • Clausing Colchester Lathe 15" x 40" (2), • Acer 3VKH E-Mill Vertical Milling Machine, • Acer 3VK Ultima Vertical Milling Machine (3), • Tsugami BN-20 w/6th axis 20 MM Dia, • Tsugami B012-III w/4th axis 12 MM Dia., • Tsugami S206-II w/6th axis 20 MM Dia., • Supertech 618 Automatic Surface Grinder 6" x 18", • O.D. Grinder 14" x 22", • Agie-Charrmilles F1 440 CCS, • Climate Controlled QC Lab, • Brown & Sharpe CMM DCC ONE 7.7.5 28"m x 28" x 20", • Brown & Sharpe Micro-Hite 900 (2), • Mitutoyo PH-A14 Optical Comparator w/DRO, • J & L PC-14-A Optical Comparator w/DRO, • Mitutoyo 178-561-02A Surftest, • Full Complement of Thread, Ring and Bore Gaging, • Accupress Advantage 177512 Press Brake, • Amada FaB.50 D Press Brake, • National NR4316 Sheet Roller, • Akyapak 1550 Plate Roller, • PEMserter series 2000 w/Feeder, • Shop Sabre 4896 CNC Router, • 351 Syncrowave 350 amp, • Aircrafter 330ST 300 amp, • 250 Syncrowave DX 250 amp, • 200 Dynasty 200 amp, • 350 Dynasty 350 amp, • 400 Dynasty (Miller), • Millermatic 250 (2), • Burco/Koco KST-9 Stud, • Trumpf Trulaser 3030 60" x 120" Fully Automated, • Trumpf 2530 48" x 96" Auto Pallet Shuttle System., • Minilase Pro SE 12" x 12" x 20", • Cosen C-510MNC Production Band Saw 13" x 20", • TechniIntel G2 713 78.7" x 157.5" Apply Now Ready to take your machining career to the next level? Apply today and join a company where your skill and dedication make all the difference.

Job DescriptionDiesel and Heavy Equipment Mechanic We are seeking a Diesel & Heavy Equipment Mechanic who thinks like an Operations Specialist. You won't just be turning wrenches; you will be the guardian of our uptime, ensuring that our specialized industrial equipment is field-ready, DOT-compliant, and operationally efficient. You will play a pivotal role in bridging the gap between mechanical health and project success. Specialized Fleet & Heavy Equipment Maintenance • Diesel Systems: Diagnose and repair diesel engines, fuel systems, and exhaust after-treatment components for our heavy-duty truck fleet., • Vacuum & High-Pressure Water Systems: Maintain and troubleshoot high-efficiency jetting/water systems and vacuum pumps., • Hydraulics & PTOs: Service hydraulic systems, including pumps, cylinders, and Power Take-Off (PTO) units that drive our vacuum and water operations., • Uptime Management: Coordinate with the Leadership Team to prioritize repairs that align with project schedules., • Field Support: Conduct emergency on-site diagnostics to minimize downtime during critical infrastructure projects., • DOT Readiness: Conduct rigorous inspections to ensure all vehicles meet Federal and State Department of Transportation (DOT) requirements., • Inventory Control: Track and manage specialized parts inventory, ensuring critical gaskets, nozzles, and hoses are always in stock. E04JI80200vb4096cwm

Job Description CNC Lathe Machinist Schedule: Full-Time About Us Proudly serving our clients for over 40 years, we continue to expand thanks to long-term contracts and a reputation for precision and reliability. As we continue to grow, we’ve invested in brand-new, state-of-the-art machines and are expanding our team with skilled professionals who take pride in craftsmanship, innovation, and quality. If you’re looking for a place where your expertise is valued, your ideas matter, and your work makes a real impact, we’d love to have you on our team. Why Master Machining? At Master Machining, we’re more than just a workplace, we’re a family. You’ll be surrounded by experienced machinists who take pride in mentoring others, leaders who value your input, and an environment built on respect, teamwork, and precision. With new equipment, competitive pay, and a supportive culture, you’ll have everything you need to build a rewarding career. What We Offer • Competitive hourly pay from $26–$40/hr, based on experience, • Consistent 40–50 hour work weeks with overtime available, • 401(k) with company match after one year of service, • Quarterly “Earned Days” program – earn paid time off for consistent attendance, • Yearly reviews, • Paid birthday off every year Health & Wellness • Medical insurance (company pays up to $460/month toward individual coverage), • Option to decline coverage and receive an additional $1.65/hour in pay, • Dental and vision coverage available Time Off & Recognition • 8 paid holidays, plus Veterans Day off (with pay) for all who served, • 40 hours paid vacation after one year, increasing with tenure, • Catered Veteran’s Day lunch to honor our military team members, • Opportunities for long-term growth and cross-training Your Role As a CNC Lathe Machinist, you’ll play a key role in bringing precision parts to life. You’ll be responsible for setting up, programming, and operating CNC lathe machines to meet high-quality standards. Working with close tolerances, you’ll ensure every part produced meets print specifications and reflects the craftsmanship Master Machining is known for. Your Responsibilities: • Program, set up, and operate various CNC lathe machines, • Verify dimensions and tolerances using precision measuring instruments, • Read and interpret blueprints, job tickets, and production drawings, • Perform regular machine maintenance and tool adjustments, • Load and indicate parts to fixtures with precision, • Monitor tool wear, replace inserts, and adjust programs as needed, • Collaborate with your team to ensure accuracy, efficiency, and consistency What We’re Looking For: • 3–5 years of CNC lathe machining experience, • Proficient in G-code programming and machine setup, • Strong understanding of blueprint reading and measurement tools, • Ability to work within tight tolerances and maintain quality standards, • Excellent work ethic and attention to detail, • Reliable, self-motivated, and team-oriented, • Willingness to work overtime or Saturdays as needed, • Experience handling both large and small components Current List of Our Machines: • Haas ST-40 4" Bar, 25.5" Chucking, • Doosan TT2100SYYB 3" Bar, 9" Chucking, • Twin Turret with Bar Feeder, • Mori-Seiki Fronteir LII 10" x 24" • Haas SL-10 with Bar Loader, 1-5/8" capacity, • Tsugami-TMA8F Multi Axis Turning Center with Bar Feeder, • Tsugami-M08SY Live Tooling & Sub Spindle with Bar Feeder (3), • Tsugami-M08SY Live Tooling and Sub Spindle with Gantry Loader • Haas VF 2 SS w/4 axis (3) 30" x 16" x 20", • Haas VF 3 SSYT w/4 axis (2) 40" x 26" x 25", • Haas VF 3 SSYT w/5 axis (2) 40" x 26" x 25", • Haas VF 10 32" x 120" x 30", • Haas EC-400 PP Horizontal 6 Pallet Pool 22" x 25" x 22, • Timemaster Super AT Lathe 40" x 120", • Clausing-Metosa Engine Lathe 24" x 108", • Clausing Colchester Lathe 15" x 40" (2), • Acer 3VKH E-Mill Vertical Milling Machine, • Acer 3VK Ultima Vertical Milling Machine (3), • Tsugami BN-20 w/6th axis 20 MM Dia, • Tsugami B012-III w/4th axis 12 MM Dia., • Tsugami S206-II w/6th axis 20 MM Dia., • Supertech 618 Automatic Surface Grinder 6" x 18", • O.D. Grinder 14" x 22", • Agie-Charrmilles F1 440 CCS, • Climate Controlled QC Lab, • Brown & Sharpe CMM DCC ONE 7.7.5 28"m x 28" x 20", • Brown & Sharpe Micro-Hite 900 (2), • Mitutoyo PH-A14 Optical Comparator w/DRO, • J & L PC-14-A Optical Comparator w/DRO, • Mitutoyo 178-561-02A Surftest, • Full Complement of Thread, Ring and Bore Gaging, • Accupress Advantage 177512 Press Brake, • Amada FaB.50 D Press Brake, • National NR4316 Sheet Roller, • Akyapak 1550 Plate Roller, • PEMserter series 2000 w/Feeder, • Shop Sabre 4896 CNC Router, • 351 Syncrowave 350 amp, • Aircrafter 330ST 300 amp, • 250 Syncrowave DX 250 amp, • 200 Dynasty 200 amp, • 350 Dynasty 350 amp, • 400 Dynasty (Miller), • Millermatic 250 (2), • Burco/Koco KST-9 Stud, • Trumpf Trulaser 3030 60" x 120" Fully Automated, • Trumpf 2530 48" x 96" Auto Pallet Shuttle System., • Minilase Pro SE 12" x 12" x 20", • Cosen C-510MNC Production Band Saw 13" x 20", • TechniIntel G2 713 78.7" x 157.5" Apply Now Ready to take your machining career to the next level? Apply today and join a company where your skill and dedication make all the difference.

Job DescriptionDescription: POSITION SUMMARY: Dive into an exciting role where you’ll make a splash every day! As a lifeguard, you'll be the ultimate protector of fun, ensuring everyone enjoys the water safely in our vibrant aquatics center. Whether you’re stationed at the pool or chatting with members, you’ll be the first responder, safety enforcer, and maybe even a swim coach in the making! This job is perfect for strong swimmers who love the water and want to make a difference while having a great time. ESSENTIAL FUNCTIONS: • Rescue Ready: Monitor swimmers with hawk-like vigilance and be prepared to dive in at a moment’s notice., • Monitor Aquatic Areas: Maintain constant vigilance over swimming pools and surrounding areas to prevent accidents and ensure the safety of all patrons., • Emergency Response: Act quickly and effectively in emergencies, performing water rescues, administering CPR, and providing first aid as needed., • Enforce Safety Rules: Politely but firmly enforce facility rules and regulations to prevent unsafe behavior and ensure a safe environment for all., • First Aid Guru: Administer basic first aid and CPR as needed (don’t worry, we’ll train you to be a hero)., • Customer Service Pro: Greet guests with a smile, answer their questions, and help make their day by the water enjoyable. Greet and interact with guests, answer questions, and assist with any needs to ensure a positive experience at the facility., • Swim Instructor (Bonus Fun & Pay!): Teach kids and adults alike how to swim, turning them into confident water enthusiasts., • Team Player: Work with a fun-loving, supportive team to ensure the safety and satisfaction of all guests., • Conduct Safety Checks: Regularly inspect rescue equipment, pool facilities, and water conditions to ensure proper working order., • Assist with Facility Maintenance: Help maintain the cleanliness and organization of the pool area, including tidying up pool decks, arranging chairs, and ensuring the facility is safe and presentable., • Record Keeping: Maintain accurate records of pool attendance, water quality, and any incidents or rescues that occur during your shift., • Continuous Training: Participate in regular training sessions to keep skills sharp and up-to-date with the latest safety protocols. OUR CULTURE: Our mission and core values are brought to life by our culture. In the Y, we strive to live our cause of strengthening communities with purpose and intentionality every day. We are welcoming: we are open to all. We are a place where you can belong and become. We are genuine: we value you and embrace your individuality. We are hopeful: we believe in you and your potential to become a catalyst in the world. We are nurturing we support you in your journey to develop your full potential. We are determined: above all else, we are on a relentless quest to make our community stronger, beginning with you. YMCA PART-TIME BENEFITS OVERVIEW: At the YMCA, we invest in our people so they can better serve our communities. Our part-time employees enjoy a supportive, inclusive work environment with valuable benefits that reflect our mission and core values. • Complimentary YMCA Membership, • Flexible Scheduling, • Professional Development, • Retirement Benefits, • Employee Resource Groups YMCA COMPETENCIES (Leader): Mission Advancement: Accepts and demonstrates the Ys values. Demonstrates a desire to serve others and fulfill community needs. Recruits volunteers and builds effective, supportive working relationships with them. Supports fund-raising. Collaboration: Works effectively with people of different backgrounds, abilities, opinions, and perceptions. Builds rapport and relates well to others. Seeks first to understand the other person’s point of view and remains calm in challenging situations. Listens for understanding and meaning; speaks and writes effectively. Takes initiative to assist in developing others. Operational Effectiveness: Makes sound judgments, and transfers learning from one situation to another. Embraces new approaches and discovers ideas to create a better member experience. Establishes goals, clarifies tasks, plans work and actively participates in meetings. Follows budgeting policies and procedures and reports all financial irregularities immediately. Strives to meet or exceed goals and deliver a high-value experience for members. Personal Growth: Pursues self-development that enhances job performance. Demonstrates an openness to change and seeks opportunities in the change process. Accurately assesses personal feelings, strengths and limitations and how they impact relationships. Has the functional and technical knowledge and skills required to perform well; uses best practices and demonstrates up-to-date knowledge and skills in technology. The YMCA of Southeastern NC does not discriminate in employment opportunities or practices on the basis of race, color, faith, gender, pregnancy, national origin, age, disability, sexual preference, gender identity, veteran status, citizenship status, genetic information, or any other characteristic protected by applicable law, except where a bona fide occupational qualification applies. The Y: We’re for youth development, healthy living, and social responsibility. Requirements: QUALIFICATIONS: • Certified Lifeguard: Must have current lifeguard certification (we can guide you on how to get one if you don’t)., • CPR and First Aid Certified: Knowing how to handle emergencies is key., • Strong Swimmer: You’re not just good at swimming—you’re a pro!, • Friendly and Approachable: You know how to keep things safe while ensuring everyone has a great time. WORK ENVIRONMENT & PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Sufficient physical strength and agility to carry out essential duties., • Ability to erect and stand on ladders and platforms at heights up to 30 feet., • Ability to work with paint, cleaning equipment, chemical compounds, solvents, cleaners, and solutions in dry, liquid, powder, spray, and aerosol forms., • Ability to paint, clean equipment, and operate motorized equipment as needed., • Ability to work in conditions that will create dirt and dust., • Ability to perform essential maintenance to facility or equipment which may involve, but not limited to the following activities: semi – reaching to full-reach overhead; crouching; kneeling; shoveling; carrying, working in narrow and/or confining spaces: underground, overhead, and at ground level; twisting of the waist, shoulders, and legs; and lying on stomach and/or back. YMCA SAFETY REQUIREMENTS: CPR & First Aid – Must be able to complete and maintain certification in CPR and First Aid; able to assist individuals in need until professional help arrives. Emergency Response – Ability to quickly identify emergency situations (medical, fire, environmental, etc.) and respond appropriately following established procedures. Incident Management – Required to report all safety incidents and hazards immediately and accurately to supervisors. Safe Environment – Commitment to maintaining a safe, clean, and hazard-free environment for all staff, members, and participants. Physical Readiness – Must be able to perform physical tasks related to safety, including assisting individuals of various ages and physical abilities. Compliance – Follow all YMCA safety protocols, OSHA standards, and state/local regulations as applicable. Reasonable Accommodation Statement: The YMCA provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disabilities Act (ADA) and applicable state and local laws. If you require accommodation to complete the application process or to perform essential job functions, please contact Human Resources. JOB TITLE: Lifeguard - Outdoor Seasonal FLSA STATUS: Part-Time, Seasonal PAY RATE: $13.06 - $16.33/hour REVISION DATE: 02/04/26 Equal Opportunity Employer: The YMCA is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status. We are committed to creating a diverse and inclusive workforce that reflects the communities we serve.

Job DescriptionDescription: Company Overview: For over 25 years, Pinnacle Trailer Sales, Inc. has been a trusted leader in the semi-trailer industry, specializing in sales, parts, and service solutions. Guided by our Core Values: Integrity, Respect, Listening, Duty, Teamwork, and Responsibility. We foster a culture of professionalism, collaboration, and excellence. We prioritize both customer satisfaction and employee well-being, offering a comprehensive benefits package, including medical, dental, and vision insurance, as well as company-paid life insurance and disability plans. At Pinnacle, we are committed to delivering quality, reliability, and innovation in everything we do. Job Summary: The Service Technician is responsible for inspecting, diagnosing, repairing, and maintaining semi-trailers and related equipment to ensure safe, reliable operation. This role supports customers and internal teams by delivering timely, high-quality mechanical, electrical, and structural repairs, while maintaining accurate service documentation and upholding company standards for safety and workmanship. *Safety bonuses are available immediately. *Productivity and efficiency bonuses begin after 90 days. Requirements: Job Duties/Responsibilities: • Inspect and diagnose trailer systems to identify mechanical, structural, suspension, brake, and electrical repair needs., • Perform service, repair, and replacement of trailer brake and suspension systems, ensuring safe and reliable operation., • Troubleshoot and repair 12VDC electrical systems, including lighting and wiring components., • Execute MIG welding and metal fabrication repairs to trailer frames and structural components as required., • Complete routine preventative maintenance and install trailer components or accessories as needed., • Accurately document work performed by completing service records, repair orders, and parts usage within company systems., • Maintain a safe, clean, and organized work environment and operate shop tools and equipment in accordance with safety standards., • Perform all other duties as assigned. Required Skills/Abilities: • Strong mechanical aptitude, with the ability to diagnose and repair issues across a range of trailer types and configurations., • Understanding of hydraulic systems, commonly used in dump trailers, tilt decks, and utility equipment., • Ability to read and interpret technical diagrams, service manuals, and parts schematics., • Detail-oriented and committed to quality workmanship., • Ability to work both independently and collaboratively., • Strong time management and organizational skills., • Commitment to workplace safety., • Basic computer literacy. Physical Requirements & Work Environment: • Ability to lift, carry, push, and pull up to 50 pounds unassisted on a regular basis., • Ability to work indoors and outdoors in varying weather conditions., • Ability to stand, bend, kneel, and work in physically demanding positions for extended periods. Education and Experience: • High school diploma or equivalent preferred., • Demonstrated experience as a mechanical or service technician, preferably within the trailer, heavy equipment, or automotive industries.

Job Description Master Machining, Inc. CNC Machinist – 1st & 2nd Shift Opportunities | Join Our Growing Team About Us Proudly serving our clients for over 40 years, we continue to expand thanks to long-term contracts and a reputation for precision and reliability. As we continue to grow, we’ve invested in brand-new, state-of-the-art machines and are expanding our team with skilled professionals who take pride in craftsmanship, innovation, and quality. If you’re looking for a place where your expertise is valued, your ideas matter, and your work makes a real impact, we’d love to have you on our team. Why Master Machining? At Master Machining, we’re more than just a workplace, we’re a family. You’ll be surrounded by experienced machinists who take pride in mentoring others, leaders who value your input, and an environment built on respect, teamwork, and precision. With new equipment, competitive pay, and a supportive culture, you’ll have everything you need to build a rewarding career. What We Offer • Competitive hourly pay from $26–$40/hr, based on experience, • Consistent 40–50 hour work weeks with overtime available, • 401(k) with company match after one year of service, • Quarterly “Earned Days” program – earn paid time off for consistent attendance, • Yearly reviews, • Paid birthday off every year Health & Wellness • Medical insurance (company pays up to $460/month toward individual coverage), • Option to decline coverage and receive an additional $1.65/hour in pay, • Dental and vision coverage available Time Off & Recognition • 8 paid holidays, plus Veterans Day off (with pay) for all who served, • 40 hours paid vacation after one year, increasing with tenure, • Catered Veteran’s Day lunch to honor our military team members, • Opportunities for long-term growth and cross-training Your Role As a CNC Machinist, you’ll help bring our customers’ designs to life using precision CNC milling equipment. You’ll work with tight tolerances, quality materials, and a team that values pride in workmanship and continuous improvement. Your Responsibilities: • Program, set up, and operate CNC milling machines, • Verify dimensions and tolerances using precision measuring instruments, • Read and interpret blueprints, job tickets, and production drawings, • Perform regular machine maintenance and tool adjustments, • Collaborate with teammates to maintain quality and meet production goals What We’re Looking For: • 3–5 years of CNC machining experience, • Strong understanding of G-code programming and machine setup, • Ability to read and interpret technical drawings, • Reliable, detail-oriented, and eager to produce top-quality work, • Comfortable working with both large and small components, • Willingness to work overtime or Saturdays when needed Current List of Our Machines: • Haas ST-40 4" Bar, 25.5" Chucking, • Doosan TT2100SYYB 3" Bar, 9" Chucking, • Twin Turret with Bar Feeder, • Mori-Seiki Fronteir LII 10" x 24" • Haas SL-10 with Bar Loader, 1-5/8" capacity, • Tsugami-TMA8F Multi Axis Turning Center with Bar Feeder, • Tsugami-M08SY Live Tooling & Sub Spindle with Bar Feeder (3), • Tsugami-M08SY Live Tooling and Sub Spindle with Gantry Loader • Haas VF 2 SS w/4 axis (3) 30" x 16" x 20", • Haas VF 3 SSYT w/4 axis (2) 40" x 26" x 25", • Haas VF 3 SSYT w/5 axis (2) 40" x 26" x 25", • Haas VF 10 32" x 120" x 30", • Haas EC-400 PP Horizontal 6 Pallet Pool 22" x 25" x 22, • Timemaster Super AT Lathe 40" x 120", • Clausing-Metosa Engine Lathe 24" x 108", • Clausing Colchester Lathe 15" x 40" (2), • Acer 3VKH E-Mill Vertical Milling Machine, • Acer 3VK Ultima Vertical Milling Machine (3), • Tsugami BN-20 w/6th axis 20 MM Dia, • Tsugami B012-III w/4th axis 12 MM Dia., • Tsugami S206-II w/6th axis 20 MM Dia., • Supertech 618 Automatic Surface Grinder 6" x 18", • O.D. Grinder 14" x 22", • Agie-Charrmilles F1 440 CCS, • Climate Controlled QC Lab, • Brown & Sharpe CMM DCC ONE 7.7.5 28"m x 28" x 20", • Brown & Sharpe Micro-Hite 900 (2), • Mitutoyo PH-A14 Optical Comparator w/DRO, • J & L PC-14-A Optical Comparator w/DRO, • Mitutoyo 178-561-02A Surftest, • Full Complement of Thread, Ring and Bore Gaging, • Accupress Advantage 177512 Press Brake, • Amada FaB.50 D Press Brake, • National NR4316 Sheet Roller, • Akyapak 1550 Plate Roller, • PEMserter series 2000 w/Feeder, • Shop Sabre 4896 CNC Router, • 351 Syncrowave 350 amp, • Aircrafter 330ST 300 amp, • 250 Syncrowave DX 250 amp, • 200 Dynasty 200 amp, • 350 Dynasty 350 amp, • 400 Dynasty (Miller), • Millermatic 250 (2), • Burco/Koco KST-9 Stud, • Trumpf Trulaser 3030 60" x 120" Fully Automated, • Trumpf 2530 48" x 96" Auto Pallet Shuttle System., • Minilase Pro SE 12" x 12" x 20", • Cosen C-510MNC Production Band Saw 13" x 20", • TechniIntel G2 713 78.7" x 157.5" Apply Now Ready to take your machining career to the next level? Apply today and join a company where your skill and dedication make all the difference.

Job DescriptionDescription: INTRODUCTION The Davis Community is a vibrant senior living neighborhood and has been a proud corporate citizen of Wilmington, NC for over 60 years. Established as a skilled nursing facility in the early 1960s, Davis quickly became the premier healthcare center for senior care, and while they have grown and evolved, adding to services offered, we continue to be highly regarded in the region as a community that emphasizes compassion, care, and show of respect and dignity for residents. COMMUNITY CULTURE At The Davis Community, deliberate and diligent efforts are made to emphasize and focus on an underlying culture of respect and service that can be seen and felt by all. Employees, residents, and guests of the community are treated with respect and personalized care to the best of the organization’s ability. The desire to continue to elevate all aspects of services is preeminent so that Davis can provide an empowering and caring retirement atmosphere filled with friends, enjoyment, and a fulfilling sense of community. • State-of-the-art Facilities, • On-demand Pay, • Benefits begin after 30 days, • Low-cost lunches, • Free Membership to our gym and indoor pool, • Shift differential, • Work-life Balance, • Growth The Davis Community requires that all current and new employees, including contract staff, receive an annual influenza vaccination and TB skin test unless a reasonable or disability accommodation is granted. We are looking for compassionate and dedicated caregivers to provide direct personal care for our residents in a manner that is consistent with our assisted living philosophy. Here at The Davis Community, each resident is a unique individual who receives a person-centered care plan. Our caregivers are an essential part of making our residents daily experiences worthwhile, safe and happy while fostering a sense of independence. Our residents are not nameless faces and neither are those who care for them. If you are interested in being a valued member of a healthcare team that works together for those in our care, The Davis Community is a great fit for you. We value compassionate and dependable team players. Apply now if you are interested in a fulfilling and service-orientated career! We offer competitive pay, flexible hours, benefits, and other perks. BASIC PURPOSE: The Activity Assistant is responsible for assisting the Life Enhancement Mentor with planning and executing resident activities and to provide leadership to the household in quality of life including various approaches as determined via individualized, person-centered care planning. To provide for recreation, social interaction and exercise supporting the psychosocial well-being to all residents. MAJOR WORK ACTIVITIES: 1. Assists Life Enhancement Mentor with organizing activities, completing monthly calendars, providing input/ideas for monthly newsletter, setting up and breaking down of activities., 2. Promotes and provides diverse opportunities for meaningful pursuits, daily pleasures, recreation, exercise, friendships, social interaction, growth, and learning, fun and enjoyment, personal routines, and household rituals., 3. Promotes and provides wellness programming through exercise, recreation, social interaction, and awareness of daily pleasures., 4. Place seasonal & special decorations throughout the facility that encourages awareness and interest, 5. and reflects the overall personality of the residents., 6. Perform 1:1 interaction and in-room visits at least monthly., 7. Organizes and completes activities in the household and ensures the activities in the household are in compliance with federal and state regulation and professional standards of practice while honoring the values of person-centered, resident-directed practices in tandem with Life Enhancement Mentor., 8. Participates in event root cause analysis., 9. Completion of all documentation required for RAI documentation with regards to psychosocial well-being, activity, and functional needs., 10. Assures that resident rights and responsibilities are honored and met, including the right to refuse or individualize treatment., 11. Communicates and works closely with all disciplines (i.e. nursing, therapy, dietary etc.) to encourage and assist residents to participate in activities, as well as relaying any change of behavior, either cognitively or physically to nursing staff., 12. Assures regulatory compliance by completing and encouraging appropriate record keeping and documentation in households and by maintaining appropriate professional files in tandem with Household Coordinator., 13. Complete all clinical chart documentation according to best practice at time of service rendered, prior to end of current shift and/or by “late entry” with date, time, e-signature or initials where appropriate., 14. Provide programming for residents to maintain daily living functions, which include but are not limited to land exercise, aquatics exercise, functional maintenance programming, ambulating, feeding, contracture prevention, bowel and bladder, toileting, etc., 15. Completes and facilitates an individualized plan of care to best meet the needs of the resident., 16. Attends resident care plans., 17. Participates in nutrition care planning in tandem with the Registered Dietician and Nutrition Guide, 18. Completes and facilitates daily documentation of the functional maintenance and communicates with nurses and administrators., 19. Communicate with the therapy department to continue plan of treatment after the resident has been discharged from therapy services, implementing and performing modalities., 20. Transports residents as needed to and from activities/houses., 21. Acts as a liaison across all disciplines in the completion of the plan of care i.e. recreation, nursing, and nutrition. · Physical exertion required no more than 60% of the time. Physical exertion also is described as standing, stooping, kneeling and bending. · Intermittent lifting and carrying of objects weighing between 30-40 pounds and pushing of objects weighing at least 100 pounds. · Low exposure to infectious disease. · May be exposed to noisy or busy environment or elements of weather, including heat, cold, and rain. · Utilize the following equipment including but not limited to telephone, computer & printer, copier, fax, bus lift, fire extinguisher, kitchen appliances and electrical devices. · Exposure to peculiarities in behavior and reactions of the aged, including combative residents. · Ability to evaluate and appropriately respond to verbal and non-verbal communication from resident’s diverse stages of development, i.e. adults and geriatrics. · Ability to effectively communicate with people. · Sufficiently mobile to push wheelchairs, carts and equipment. · Experience in the use of patient/ resident care equipment. · Communicate via telephone and other automation vehicles. · Visualize equipment and medical record forms. · Ability to perform mathematical functions · Physical job demands may be subject to possible modifications to reasonably accommodate individuals with disabilities. MINIMUM QUALIFICATIONS: Education: High school diploma or equivalency is required. Licensure/Certification: CPR/First Aid preferred. Experience: Experience in geriatrics, recreation, or social administration and experience with dementia care preferred. An equivalent combination of education and experience may be considered.

Job DescriptionAs a Digital Print Production Operator, you will be responsible for job setup and printing using our cut-sheet digital printers. You will be in charge of calibrating printers and color-matching projects against our client's Pantone colors / previous jobs. You will also manage the service and maintenance of the machines as needed. This is an excellent position for someone interested in entering the industry and building a lasting career. You will also be trained to assist our large format department in printing, production, and installation projects. Primary examples of projects that need assistance are vehicle graphics and wall mural projects that require a second installer. The primary responsibility of the Digital Print Production Operator is to operate and complete all digital printing (B&W/Color) production for maximum production efficiency. Compensation and Benefits: • Competitive Compensation, • Flexible Scheduling, • Hard work, collaboration, humanity, fun, and laughter, • Career path development, • Responsible for operating digital commercial printers using Fiery Command Workstation., • Assisting in our large format department with installations & production work when available, • Responsible for imposing files for print & running USPS mail software, • Works with Production Scheduler to prioritize and manage daily job production, • Produces orders accurately, efficiently, and quickly while maintaining the highest quality standards, • Updates job status and location in MIS system, • Always runs a proof copy and compares it to the work order, • Controls waste and redos by quality-checking jobs as they are being produced, • Completes Quality Assurance documents for all printed jobs, • Tracks waste, spoilage, usage, and inventory for all digital printing machines, • Maintains all Digital Printing Equipment logs, • Maintains a clean and organized work environment, • Performs all required maintenance and learns extended maintenance from the technician., • Ensures that all service clicks are credited by the service technician in each call, including credit for poor-quality copies, • Calibrates and manages all color devices as required to maintain color consistency., • Monitors color consistency during all print runs and make adjustments as necessary., • Digital printing experience preferred, • Ability to organize several activities and tasks concurrently., • Ability to work flexible hours and overtime, if needed, • Ability to maximize profit through the efficient use of time and equipment, • Can perform basic bindery functions, • Familiar and comfortable with Fiery Print Controller, a plus, • Is proficient with the use of Command Workstation (if applicable) to control digital workflow, • Graphic design skills are a plus but not necessary

Job Description We are currently seeking a Maintenance Assistant to join our team! You will be responsible for completing work orders and other required tasks. Responsibilities: • Complete work and repair orders in a timely fashion, • Estimate time and extent of repairs, • Perform routine preventive maintenance, • Maintain material and supply inventory, • Previous experience in maintenance or other related fields, • Familiarity with maintenance tools and equipment, • Ability to handle physical workload, • Deadline and detail-orientedCompany DescriptionFranchise owned and managed hotel with immediate growth opportunities. Must be guest focused with "H" factor in your DNA. Hospitality is everything and working together, across the lobby or the telephone, will be our first step in ensuring guest satisfaction.Franchise owned and managed hotel with immediate growth opportunities. Must be guest focused with "H" factor in your DNA. Hospitality is everything and working together, across the lobby or the telephone, will be our first step in ensuring guest satisfaction.

Job DescriptionOur client is a well-established precision machining firm in the Castle Hayne, NC area seeking multiple Machinists across varying skill levels and disciplines to join their growing team. This opportunity provides progressive growth opportunities with a well-respected and fast-growing company. The ideal candidate will have experience with either CNC or manual operations of mill and/or lathe equipment. Job Responsibilities - • Set up, operate, and maintain manual and/or CNC Lathe and Mill machining equipment., • Interpret technical drawings, job tickets, and print specifications to produce parts to exact requirements., • Use precision measurement instruments to verify dimensions and tolerance., • Adjust tooling before and during machining operations to ensure accuracy., • Perform routine preventive maintenance on assigned equipment., • Collaborate with team members and supervision to prioritize workflow and hit daily production targets. Job Requirements - • 3-5 years of hands-on machining experience in CNC lathe, CNC mill, manual lathe, and/or manual milling., • G-code programming knowledge and hands-on CNC machine setup experience., • Ability to read and interpret mechanical drawings and apply tolerances accurately in a production setting., • Proficient with precision measuring instruments., • Dependable and detail-oriented with the ability to maintain quality output in a high-paced shop environment. By applying for this job, you agree to receive calls, Al-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undeliverable messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at #ZRRN

Job Description Lula is looking for a 1099 Roofing Pro to help with property maintenance of several thousand rental properties across the Wilmington area. We are seeking individuals who have experience in the rental property industry and has an eager attitude. What is Lula? Lula is a service designed for property managers to eliminate the hassle of managing and coordinating maintenance, improve the resident experience, and reduce maintenance costs for property owners. Lula works hand-in-hand with our service-provider partners to ensure everyone gains. Unlike other platforms, Lula has been designed from the ground up to work with your needs and answer your concerns. Whether you are a mom-and-pop small business or an international corporation, there are many reasons why joining the Lula Network is a good idea for your company. Apply Here: BENEFITS WITH LULA: -Lula delivers real jobs, not leads -Set your own hourly rates -24/7 phone and text support for Lula Pros -New jobs available daily -Choose only the jobs you want -Paid for labor and parts within 1-3 days REQUIREMENTS: -Must be 18 or older -Must have General Liability Insurance -No felonies within the past 7 years -Be friendly, respectful, and punctual -Must provide your own tools and materials -Must complete vendor onboarding and be approved Please email with any questions

Job DescriptionSalary: $18+ Hourly/BOE Quick Video about Freeman Landscape Do you like to be outside? Do you like to stay active? Freeman Landscape is the leading landscape firm in Eastern NC. We have been maintaining our clients properties and keeping them beautiful for over 26 years!! We currently have a position open in our maintenance department. We are looking for an individual that loves to be outside, has a strong work ethic, positive attitude and willingness to learn. Our employees love what they do and take pride in their work. We offer the best pay and provide the best benefits to the ones that make this company the best landscape firm in Wilmington. Are you ready to join our team? We build teams that work together to achieve a common goal, to make our clients day brighter. We provide a service that allows the client to enjoy their property and spend more time with their family. How great is that? Do you possess these traits? • Great Communicator, • Positive Attitude, • Team Player, • Dependable, • Responsible, • Ethics and Integrity If so, apply with Freeman Landscape and start building your future with the best! • Valid NC Drivers License required Work Conditions: • Ability to work with hand tools, power tools, small engine equipment, • Ability to lift a minimum of 50 lbs. repeatedly through an entire work shift, • Ability to work in a fast-paced environment, • Requires good manual dexterity, • Excellent stamina is required, • Work near heavy equipment and other vehicles on a regular basis, • Work outdoors in various conditions including heat and humidity, rain, dust, noise, and cold An Equal Opportunity Employer

Overview: CoolSys solves the most complex challenges in refrigeration, air conditioning, heating, engineering, and energy management. With over 3,700 associates nationwide, we deliver tailored solutions to help businesses cut costs, improve equipment performance, and reduce emissions. Our services include HVAC and refrigeration equipment sourcing, installation, repair, maintenance, monitoring, and optimization. We also offer engineering design, energy resilience and consumption optimization, asset recycling, and seamless multi-site rollouts across states. Based in Southern California since 2007, CoolSys serves over 45,000 customer locations in industries like retail, food service, commercial, data centers, industrial, and pharmaceuticals. No wonder Newsweek named CoolSys one of America’s Greatest Workplaces! We understand that hiring great people is the foundation of everything we do. Our employee benefits packages include: * Competitive pay: Negotiable based on experience * Benefits: Medical, Dental, Vision and Prescription coverage. * Paid vacation, holidays, and floating holiday. * 401(K) with Company match. * Company sponsored life insurance, as well as optional AD&D, short and long-term disability. * Tuition reimbursement. * Employee discounts on vehicles, hotels, theme parks, select cell phone bills and so much more. * Pet Insurance. * Legal Plan, and ID Theft Protection. Responsibilities: JOB SUMMARY The Branch Manager leads the administrative team in supporting our HVAC and refrigeration technicians in the field. This manager works directly with service and install technicians, dispatch personnel, and other managers to ensure customer satisfaction while meeting departmental goals and objectives. Presenting themselves as a senior company representative, the Branch Manager often communicates directly with customers, vendors, and suppliers to ensure accurate communication of job or project status and requirements. ESSENTIAL DUTIES AND RESPONSIBILITIES Project/Business Responsibilities • Maintains communication with vendors and factory personnel concerning warranty issues, product recall notices, operational product problems, premature failures, and other issues., • Monitors assigned service vehicles to ensure they are maintained and operated according to company policy and that an adequate inventory of parts and materials is maintained., • Monitors goals and objectives to ensure departmental profitability., • Reviews work orders and invoices for accuracy., • Able to send out quotes to customers promptly. People Responsibilities • Interviews, screens, and evaluates Technicians to meet workload demands., • Schedules HVAC technicians to meet service demands and customer expectations., • Reviews Technician's work, techniques, and safety requirements to ensure quality meets established standards and recommends improving quality and productivity., • Complies with all applicable health and safety regulations, policies, and established work practices. Ensures appropriate employee safety training and compliance is completed., • Responsible for staff performance appraisals, reviews, and setting improvement goals per company requirements., • Communicates regularly with dispatch to ensure personnel is scheduled properly by skill level, efficiency, and training requirements., • Communicates daily with dispatch reporting on project information, estimated job completion time, labor hours, and parts or material used. 5+ years of successful and recent HVAC and Refrigeration service experience. Work Experience / Skills * 3+ years of experience in Service Management is required. * 2 years of technical training or an associate degree. * Solid working knowledge of Word, Excel, and Outlook and the ability to learn new systems. * Valid driver’s license. * Strong business acumen and Working experience in managing and understanding profit margins, job costing, as well as other business-related metrics. * Problem-solving and conflict-management skills. • Detail-oriented and highly organized with the ability to handle multiple tasks and assignments. Ability to generate ideas and create processes to grow the service department. * Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. * Ability to work well with management, executive leadership, support staff, and technicians. * Ability and willingness to work a non-standard schedule: nights, weekends, and holidays, as necessary. * Ability to understand and follow all company policies and procedures and all applicable State and Federal laws. * Ability to use typical business tools including E-Mail, Word, Excel, etc. PHYSICAL DEMANDS AND WORK ENVIRONMENT The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The position sits onsite in Wilmington, NC. Work Environment This job operates in a clean, well-lit and climate-controlled professional office environment with minimal physical hazards and noise. This role routinely uses standard office equipment such as computers, phones, printers, etc. Physical Demands While performing the duties of this job, the employee is regularly required to stand, sit, walk, talk, hear, drive, and use hands and fingers. The employee is occasionally required to reach, stoop and kneel. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Join Us: Today, there are 27 different companies that make up the CoolSys family of brands. Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on ___ and ___. CoolSys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR for driving positions) and drug testing are required for all positions. CoolSys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

Electrician Riegelwood, NC West Fraser is a diversified North American wood products company producing southern yellow pine lumber and wood chips across the Southern US and Western Canada. We are the largest lumber producer in North America! Our employees operate in a culture that values safety first and rewards hard work. We recognize and support our team culture and focus on growing our team by promoting from within – many of our employees have built their careers with us. This position provides planning and organizational support for the Maintenance and Operations Department. Job Functions: The mill Electrician is responsible for repairs, maintenance, and PM's to the electronic components of the mill, including responsibility for various process quality control checks in the green end of the facility. • The position is responsible for running all electrical mill trouble calls millwide in addition to performing the lumber checks specified below at frequent intervals throughout the shift. The tech has responsibility for ensuring all lumber sizing out of each machine is on target, and that sawmill trim, slash and reman percentages are within targets specified., • The position is expected to be able to successfully navigate through controls, equipment, and optimization-related issues with the appropriate vendors (USNR, Comact, Porter, Baxley, etc.)., • The position is required to perform any general mechanical maintenance work or assistance, in addition to any production-related tasks as assigned by the shift or department supervision., • The position should know and understand PLC logic, drive-related issues, and other electronics-related concerns that will impact the mill., • The PQC/Electrical Technician will monitor mechanical and electrical operating systems for proper performance and make necessary parameter changes and adjustments., • The position will work closely with the Electrical and Quality Control Supervision to ensure optimum utilization of set works and optimization systems., • The position will also assist in new installations as necessary., • Ability to be self-motivated, work unsupervised, and show initiative to expand knowledge of control systems., • Must be able to understand and satisfactorily complete WO's, PM's, and other tasks in a timely manner while following all Safety Requirements and Lock-Out Procedures., • Must be available to work weekends, holidays, and overtime hours., • Must be physically capable of bending, reaching, lifting, and able to work in extreme environments, (hot, cold, rain, snow), • Must have a good understanding of all mill equipment and how it affects yield, recovery, and mix., • Must be able to use electronic test equipment (meters, diddle box, etc.)., • Must be able to troubleshoot and repair DC drives, AC inverters, PLC controls, and hardware., • Must meet minimum testing standards for Maintenance., • Preferably have a 2-year degree in Electrical/Electronics or equivalent electrical/electronic courses., • Must successfully complete company-required training courses., • Must have a good working knowledge of PC's and PLC's. Benefits starting Day 1 Competitive starting pay On-the-job training and a culture that strongly believes in promoting from within Medical Dental 401k with company match Life Insurance Disability Insurance Paid vacations and holidays Safety is one of West Fraser’s core values and our employees can expect a challenging, stable work environment with career development opportunities. Apply: If you are ready to build your career in a company that thrives on growth, a safe work environment, rewarding work, challenge, and opportunity, come build your career with us at West Fraser: ___ West Fraser is a diversified North American wood products company producing southern yellow pine lumber and wood chips across the Southern US and Western Canada. We are the largest lumber producer in North America! Our employees operate in a culture that values safety first and rewards hard work. We recognize and support our team culture and focus on growing our team by promoting from within – many of our employees have built their careers with us. West Fraser is a growing company that believes strongly in promoting from within and prides ourself on providing a challenging environment with continuous development. The successful candidate should be interested in future growth opportunities within the company. We thank all candidates for their interest. Please apply through our online application process as resumes will not be accepted at the site. No phone inquiries, please. West Fraser believes inclusive, diverse teams build a more vibrant workforce, safer operations, and a stronger company overall. We strive to create workplaces and leadership teams that are reflective of the diverse communities we are a part of. We will not discriminate against any applicant for employment on the basis of race, gender, national origin, or any other protected legal characteristic. West Fraser is an Equal Opportunity Employer M/F/V/D & Drug-Free Workplace Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

Who We Are At West Fraser, we don’t just manufacture lumber — we build people. We’re a team-driven manufacturing facility focused on safety, reliability, and personal growth. Our Millwrights and Mechanics are the glue that keeps our mill together and running. Why This Role Matters At Armour Lumber Mill, uptime isn’t optional. Our rolling stock mobile equipment mechanics play a critical role in keeping operations safe, reliable, and moving. This position is responsible for maintaining, troubleshooting, and repairing heavy mobile equipment that supports daily mill operations. If you take pride in diagnosing issues quickly, preventing breakdowns before they happen, and working in a fast-paced industrial environment — this role is built for you. What You’ll Do * Perform preventative maintenance and repairs on rolling stock and mobile equipment (e.g., forklifts, loaders, skid steers, utility vehicles, yard equipment) * Diagnose hydraulic, electrical, mechanical, and diesel engine systems * Conduct inspections to ensure compliance with safety standards * Troubleshoot breakdowns and minimize operational downtime * Complete work orders accurately and in a timely manner * Maintain a clean and safe work environment * Collaborate with operations and maintenance teams to prioritize repairs What We’re Looking For * 3+ years of industrial or heavy equipment mechanical experience * Strong working knowledge of diesel engines, hydraulics, and electrical systems * Ability to read schematics and technical manuals * Welding and fabrication experience preferred * Ability to work independently and manage multiple repair priorities * Willingness to work shifts, overtime, and respond to breakdowns as needed Perks & Growth • Benefits begin DAY 1, • Competitive starting pay, • A culture that strongly believes in promoting from within, • Medical, Dental, and Vision, • 401k with company match AND additional retirement contribution, • Employee Stock Purchase Plan, • Life Insurance, • Disability Insurance, • Paid Vacations and Holidays, • A team that supports you — not just a boss that manages you, • High School Diploma or GED, • Ability to work weekends, holidays, and mandatory overtime to support 24/7 operations, • Ability to follow all West Fraser safety policies and procedures, • Ability to communicate clearly and respectfully with team members, • Ability to walk, stand, bend, climb stairs, and lift up to 50 lbs throughout the shift, • Comfortable working in an industrial mill environment (heat, noise, dust), • Successful completion of a background check, drug screen, and physical Real Talk We hire for skill and work ethic. Reliability, attendance, and accountability are just as important as technical ability. This role directly impacts mill performance. Ready to Apply? Come build your career with us at West Fraser! Apply online ___ Bonus points if you include a short note about why this job speaks to you. We thank all candidates for their interest; however, only those selected for an interview will be contacted. Please apply through our online application process. Be sure to attach your resume to your online profile as resumes will not be accepted at the site. No phone inquiries, please. West Fraser is a diversified wood products company producing lumber, OSB, LVL, MDF, plywood, pulp, newsprint, wood chips, and energy with over 60 facilities in Canada, the United States, and Europe. We are the largest lumber producer in North America, a leading global manufacturer of wood-based panels, and the world’s largest producer of oriented strand board (OSB). We are a growing company, believe strongly in promoting from within, and pride ourselves on providing a challenging environment with continuous development. The successful candidate should be interested in future growth opportunities within the company. West Fraser believes inclusive, diverse teams build a more vibrant workforce, safer operations, and a stronger company overall. We strive to create workplaces and leadership teams that are reflective of the diverse communities we are a part of. We will not discriminate against any applicant for employment on the basis of race, gender, national origin, or any other protected legal characteristic. West Fraser is an Equal Opportunity Employer M/F/V/D & Drug-Free Workplace Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

Fusion Medical Staffing-Therapy is seeking a travel Physical Therapist for a travel job in Leland, North Carolina. Job Description & Requirements • Specialty: Physical Therapist, • Discipline: Therapy, • Start Date: ASAP, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, • Employment Type: Travel Travel Physical Therapist (PT) Company: Fusion Medical Staffing Location: Facility in Leland, North Carolina Job Details Fusion Medical Staffing is seeking a skilled Physical Therapist for a 13-week travel assignment in Leland, North Carolina. As a member of our team, you'll have the opportunity to make a positive impact on the lives of patients while enjoying competitive pay, comprehensive benefits, and the support of a dedicated clinical team. Required Qualifications: • Valid Physical Therapy license in compliance with state regulations, • Current BLS certification (AHA/ARC)Preferred Qualifications:, • Doctorate degree in physical therapy, • Physical Therapy experience, but New Grads are welcome to apply, • Evaluate patients’ physical conditions using standardized tests, clinical examinations, and patient history to identify functional limitations and treatment need, • Develop personalized rehabilitation programs based on assessment findings and patient goals, • Implement physical therapy treatment plans using various techniques to improve patient mobility and reduce pain, • Operate specialized physical therapy equipment and modalities safely and effectively, ensuring proper maintenance and calibration of devices, • Assess patient progress, adjust treatment plans as necessary, and accurately document evaluations, interventions, and outcomes in the medical record, • Work closely with physicians, nurses, occupational therapists, and other healthcare professionals to ensure coordinated care and optimize treatment outcomes, • Educate patients and caregivers on home exercise programs, proper body mechanics, injury prevention strategies, and self-management techniques to promote long-term functional recovery, • Maintain a safe treatment environment by adhering to infection control protocols, safety guidelines, and regulatory standards while addressing patients’ comfort needs during therapy sessions, • Engage in quality assurance initiatives and professional development activities to remain current with best practices in physical therapy, • Collaborate in discharge planning to ensure smooth transitions and continued patient progress in community or home-based settings, • Perform other duties as assigned within scope of practiceRequired Essential Skills:, • Critical thinking, service excellence, and good interpersonal communication skills, • The ability to read, write, and communicate in the English language, • Ability to read/comprehend written instructions, follow verbal instructions, and proficiency in PC skills, • Physical Abilities - Must be able to remain in a stationary position, move about, move equipment (50-100lbs), push, pull, and bend, • Interpersonal Skills - Must be able to work effectively with a variety of personnel (professional and ancillary) to present a positive attitude and professionalism, • Technical/Motor Skills - Must have the ability to grasp, perform fine manipulation, push/pull, and move about when assisting with procedures and/or using department equipment, • Mental Requirements - Must be able to cope with frequent contact with the general public and customers while meeting deadlines under pressure. Must be able to work under close supervision occasionally, as well as working without assistance from other personnel. Must be able to contend with irregular activity schedules occasionally and continuous concentration to detail, • Sensory - Must possess visual acuity and ability to effectively communicateBenefits Include:, • Highly competitive pay for travel professionals, • Comprehensive medical, dental, and vision insurance with first day coverage, • Paid Time Off (PTO) after 1560 hours, • Life and Short-term disability offered, • 401(k) matching, • Aggressive Refer-a-friend Bonus Program, • 24/7 recruiter support Start your rewarding career as a Travel Physical Therapist (PT) with Fusion Medical Staffing and join our mission to improve lives. Apply now! *Fusion is an EOE/E-Verify Employer Fusion Medical Staffing - Therapy Job ID #1902985. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. About Fusion Medical Staffing-Therapy With a mission to improve the lives of everyone we touch, Fusion Medical Staffing connects healthcare travelers to opportunities in the locations they've always dreamed of living. Our recruiters act as your co-pilots to support you in your next step – no matter what, where and when. This traveler-first mentality ensures you're in charge of your own destiny, but with the tools you need to succeed. Regardless if you’re a first-time traveler or an established road warrior, you get to choose the best position that not only fits your unique personality but also your personal and professional needs. As a medical traveler, you’ll get to meld your career with personal life experiences, make informed decisions and the freedom to control your career. Competitive compensation packages and opportunities to learn new skills are among some of the perks being a medical traveler with Fusion Medical Staffing. Not to mention you get to explore new cities, take adventures, meet new people, and create memories that last a lifetime. We are not just a place to find your next opportunity, but where you'll love to work. We've won awards for our ethical business practices, lasting community impact, and commitment to being an incredible place to work. Benefits • Benefits start day 1, • Medical benefits, • Dental benefits, • Vision benefits, • Referral bonus, • Mileage reimbursement, • License and certification reimbursement, • Weekly pay, • Cancelation protection, • Guaranteed Hours, • Employee assistance programs, • Continuing Education

Owner Operator | Dry Van Location: Wilmington, NC Company: Christenson Transportation Pay: $1.25 to $1.75 per mile Route Type: otr Start Date: ASAP About the Position WHAT ARE YOU WAITING FOR? CDL-A Lease Purchase Opportunity Unlock Your Potential with Christenson Transportation! Earn $190,000 – $230,000 Gross Annually! 2025 & 2026 Best to Drive For! At Christenson Transportation, we’re not just a trucking company — we’re a customer-based carrier that truly values our drivers. Whether you're an experienced driver ready to own your truck or looking to lease and eventually own, we have the perfect fit for you! What You Can Expect: Earn $190,000 – $230,000 gross yearly ️ Average 2500–3000 miles per week Late-model 2024–2026 Peterbilt 579 Epic Ultra Loft 2–3 weeks out with 2–3 days home (depending on location) ✅ NO Credit Check ✅ NO Down Payment ✅ NO trailer rental fees ✅ NO touch freight ✅ NO forced dispatch ️ 100% of truck & trailer maintenance covered 100% tire and maintenance discounts ️ 100% tolls paid by Christenson ⛽ 100% of fuel discounts passed on to you! ⚖️ 100% Pre-paid legal plan — paid by Christenson 70% Drop & Hook 2 weeks on the road followed by 2 days at home $1.00 per mile in deadhead pay on all miles Additional earnings through market surcharge and profit sharing Other Benefits & Perks: FREE WIFI Tablet with unlimited data for live streaming Low weekly payments Customer-based freight Additional pay: Multiple stop, layover, & detention Pet and passengers allowed (conditions apply) 24/7 driver lounge with showers, washer/dryer, computer/internet & more 4-year lease with a true walk-away option Longevity STAY PAY Bonuses Paid every 90 days after 1 year of service! Year 1: $1,000 total ($250 quarterly) Year 2: $2,000 total ($500 quarterly) Year 3: $3,000 total ($750 quarterly) Year 4: $4,000 total ($1,000 quarterly) Year 5+: $5,000 total ($1,250 quarterly) APPLY TODAY! Take the wheel of your future — Join Christenson Transportation now! Requirements Must have 2 years of verifiable Class A CDL experience. Must have a valid Class A CDL. Must have a valid DOT physical. Must pass a DOT pre-employment drug screen. No DUI or DWI convictions within the past 5 years. Must be able to read, write, and speak the English language in accordance with FMCSR. Stable job history for the past 3 years. No more than 3 preventable accidents in the last 3 years. No convictions for a "serious or disqualifying traffic violation" within the last 3 years, including: Excessive speeding of 15 mph or more over the posted limit. Reckless driving Improper or erratic lane changes Following to close Hit and run, failure to report, and accident No suspension/revocations in the past 12 months. No "preventable" DOT reportable accidents in the past 3 years.

Job Description Thank you for your interest in a great career opportunity with Chick-fil-A. Here, you are taking the first step towards a very rewarding career. Every job at Chick-fil-A will prepare you to be the best you can be. That is our promise to you. Here at Chick-fil-A, you’ll have the opportunity to work closely with a highly motivated and driven Owner/Operator who is personally vested in your success. Your Success is our Success We encourage you to fill out your application completely and let us know your availability. Add a cover letter to help us get your unique personality. We are looking for an enthusiastic Operation Leader to join our team. High quality management is an integral part to our restaurant’s success. Coaching and leading the team members while maintaining a positive work culture is essential to having a successful restaurant operation. We offer competitive starting pay, performance-based advancement, leadership skill development opportunities, college scholarships, flexible hours, free meals while working, and, of course, we are Always Closed on Sundays! Your Impact: • Managing and Developing a team of 30+, • Collaborate with the Owner/Operator to create and implement new policies/procedures, • Maintaining a work environment that ensures food safety, • Creating the schedule for your team, • Providing high quality customer service and satisfaction, • Reporting directly to the Owner/Operator to discuss the current/future state of the store A Director is generally a full time opportunity and offer excellent benefits. Prior experience as a restaurant general manager, catering manager, operations manager, supervisor, shift lead, Restaurant assistant general manager very helpful to your success at this job. Requirements/Responsibilities The Director is responsible for: • Opening or closing the store, • Directing the daily operations of a quick-service restaurant along with other Directors, • Ensuring that food safety and quality assurance standards are met, • Ensuring compliance with company standards in all areas of operations, including production, preparation, customer relations, restaurant maintenance and repair, inventory management, team management, recruiting, financial accountability. The ideal candidate must have excellent communication skills in addition to In-store and catering food preparation experience. • Bachelor's Degree (preferred), • 1-2 year of Leadership Experience, • Exceptional organizational skills to manage an operation with many moving parts, • Passion for Chick-fil-A values, • Open availability The Director position is generally a full time opportunity and offer excellent benefits. Prior experience as a restaurant manager, catering manager, operations manager, supervisor, shift lead, or other high level leadership position Special Instructions Please do not send any emails, resumes, or call. We are making it really easy to apply for this position. Simply submit a ZippyApp application package which may include the Common Employment Application, Resume, and a Cover Letter. In your Cover Letter, please write a short paragraph describing yourself and why you would make a great addition to our team. ZippyApp is the Common Employment Application for online and mobile that allows you to apply for jobs with one click, and is being accepted at a growing number of businesses each day.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Bonus based on performance, • Employee discounts, • Flexible schedule, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development, • Employment growth opportunities, • Competitive Wages based on experience and abilities, • Flexible Scheduling., • Competitive bonus plan. Job Summary This position contributes to Sun Tan Citys success by leading a team to create and maintain the Sun Tan City Experience for our clients. The Salon Director is required to regularly exercise discretion in managing the overall operation of the salon. The majority of your time is spent supervising and directing the workforce, making staffing decisions (i.e., hiring, training, evaluating, disciplining, discharging, staffing and scheduling), ensuring client satisfaction and quality of client experience, monitoring and motivating staff to achieve performance goals, handling minor maintenance issues, ensuring the cleanliness of your salon, and managing safety and security within the salon. The Salon Director is responsible for modeling and acting in accordance with Sun Tan City principles in order to deliver an exceptional client experience. Tasks & Responsibilities: • Developing and coaching employees to provide amazing client experiences., • Following up swiftly on client concerns and issues., • Consistently sets a positive example and demonstrates a calm demeanor during periods of high volume., • Displays a client comes first attitude by holding team members accountable for quality client service., • Drives company metrics by developing action plans. Directly motivates and instructs the salon team by implementing company programs., • Manages with integrity and honesty and promotes the culture, values, and mission of Sun Tan City., • Plans, Identifies, communicates, and delegates responsibilities to team members to ensure smooth flow of operations., • Directly responsible for the cleanliness, maintenance, sanitation, and organization of the salon., • Manages salon staffing levels to ensure employee development and maintain salon operational requirements., • Adherence to applicable wage and hour laws for non-exempt team members and minors., • Uses all operational tools to plan for and achieve operational excellence in the salon. Tools include labor guidelines, reports, cash management and inventory management., • Utilizes financial reports to identify and address trends and issues in salon performance., • Regularly conducts performance assessments, providing feedback and setting challenging goals to improve sales performance., • Manage ongoing sales., • The Salon Director is required to work a 5-day workweek of 40 hours per week. (minimum), • The Salon Director is required to work a varying number of mid and/or closing shifts each week as determined by their supervisors based on business trends and staffing needs.Experience:, • College education preferred, but not required., • Management and/or Sales experience required., • Basic Computer skills (ability to use Word, Excel, and Outlook), • Ability to manage effectively in a fast-paced environment, managing multiple situations simultaneously., • Strong knowledge of client service techniques and operational practices., • Strong problem-solving and organizational/planning skills., • Strong leaderships skills, with the ability to coach and mentor while having knowledge of supervisory practices and procedures., • Team building skills, • Ability to prioritize and delegate.Physical Requirements:, • Ability to stand and walk for long periods of time., • Ability to bend at the waist to clean tanning equipment., • Ability to lift or assist in lifting items and heavy boxes., • Ability to bend down to pick up trash, towels, etc. from the floors., • Ability to perform salon cleaning functions including dusting, sweeping, mopping, scrubbing, etc.

Job DescriptionThis position is for Substitute/PRN positions with varying hours and shifts. This schedule would change weekly based on the needs of staffing and the candidate's availability GHA Autism Supports is seeking a qualified Substitute Support Advocate Trainer to join our team. Substitutes work on an as-needed basis. The right candidate for this position will be flexible, creative, motivated and self-directed in providing support to individuals with autism. Hours for the position may vary, and may require morning, holiday, and/or weekend availability. Preference will be given to candidates who are available to work on any shift (1st, 2nd or 3rd) and who are available to work overnight. Substitutes are expected work at least one shift every month, and must attend trainings as scheduled to maintain required credentials. BASIC FUNCTION: To integrate GHA’s mission, vision and values by providing professional, person-centered guidance and support to individuals who have autism. This position provides personal or medical care as needed, teaches appropriate behaviors and provides behavior management assistance. The Direct Support Trainer assists people with autism in developing daily living skills, reaching personal goals, and becoming more integrated into their community. QUALIFICATIONS: High school diploma or equivalent required. Valid driver’s license required. Dependability and reliability required. Essential functions of the position include English language proficiency in both written and spoken English. Applicants must exhibit good communication skills and the ability to verbally express thoughts clearly. Applicant must accurately complete written documentation in a timely manner. Must have the ability to operate and navigate a personal computer. Must have the ability to work well with others, show a positive attitude, and maintain confidentiality. Driving record must meet our insurability standards. Must pass a comprehensive criminal background check and be at least 18 years of age. ESSENTIAL FUNCTIONS: • Follow, implement, and provide feedback with person-centered and behavioral outcomes., • Plan, perform, or assist with care or activities with individuals according to their preference or needs, to include, but not limited to, household chores (cooking, cleaning, personal hygiene, laundry, dishes, vacuuming, fixing bed, household maintenance, etc.), community involvement, social, recreation and leisure skills, communication skills, personal safety skills, appropriate behavior., • Provide opportunities for new experiences in the community or home., • Maintain confidentiality in all aspects of the job., • Ensure the safety and well-being of the individual(s) served at all times., • Assist individual(s) served by GHA with self-advocacy skills and promote independence., • Transport individuals (adhering to all safety policies and laws) as needed to meet program objectives and individual needs., • Exhibit flexibility to changing situations and be able to adapt as necessary., • Participate in required meetings and trainings., • Take direction and initiate actions that will allow for cross-training at multiple sites if required., • If applicable to the person, apply therapeutic intervention techniques as needed to individuals with verbal or physical aggression., • If applicable to the person, assist with or perform personal care—bathing, bowel and bladder care, showering, exercising, feeding, hair care (brushing, washing, styling, shaving), dental care (brushing, flossing, dentures), nail clipping, etc., • Medication management, if applicable to the individual. Ensure proper medication administration., • Maintain accurate financial management and documentation of client funds., • Ability to effectively manage and redirect behaviors, both physical and verbal., • Other duties as assigned.

Job DescriptionDescription: The Operations Manager is responsible for Hotel Operations, with direct oversight of the Guest Services manager and the Hotel Reservations Systems. This position reports directly to the Assistant General Manager and will help to inform planning and development for Front Desk, maintenance, F&B and housekeeping departments. The Operations Manager will work closely with the Guest Service Manager ensuring back-of-house operations and front-of-house operations are coordinated. The Operations Manager will work with the guest services manager to manage Front Desk staff and operations to ensure excellence in product and service is provided to all guests. Responsibilities: o Oversee day-to-day front of house operations, including housekeeping, and hotel reservations; Fill in as Rooms Inspector when needed o Oversee property management system and integration with all external systems to ensure proper function o Oversee systems used to manage guests, as well as maintenance work orders to make sure staff are utilizing these appropriately o Collaborate with General Manager as follows: o Front Desk training o Drafting Front Desk schedules to ensure appropriate staffing o Manages and motivates all front office personnel with the supervision of staffing, training, discipline, scheduling, and performance, hires employees as directed by GM o Checks and controls room reservations, front office systems, supplies inventory, scheduling, forecasting. o Manages Guest Services Relations, Training, and Guest Response processes. Investigates and makes a record of guest complaints o Ensuring that product is adequately servicing guest needs and expectations QUALIFICATIONS: o Must be able to work all shift including weekends and evenings o Must have demonstrated computer skills for guest registration, reservations, reporting, etc. o A minimum of average financial comprehension to understand and interpret numbers as they apply to operations in hotels o Proficient supervisory skills o Capable of developing and training subordinates o High level of patience, problem solving skills, tact, diplomacy to defuse anger and resolve conflicts/disputes o Duties are subject to change and additional responsibilities/tasks may be assigned Requirements:

Build your best future with the Johnson Controls team As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support many industries worldwide. You will have the opportunity to develop yourself through meaningful service work and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away! Be part of the future! We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference. What we offer: • Competitive Starting Pay, • Paid Training, • Global Advancement Opportunities, • Company Vehicle (as applicable), • Referral Bonuses, • Comprehensive Benefits, • Medical/Dental/Vision insurance, • Health Savings Account (HSA), • Life Insurance, • 401(k) savings plan with company match, • Short-Term and Long-Term Disability, • Employee Assistance Program, • Wellness Program, • And More! What you will do Under minimal supervision, conducts preventive maintenance, repair, installation, and commissioning and general servicing of systems (including detailed troubleshooting of systems). Responsible for high levels of customer satisfaction through direct, on site, customer interface. With a high level of complete technical competence, mentors control technicians, service technicians and mechanical technicians on building automation activities. Properly completes required project and service documentation. Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of service How you will do it • Diagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software., • Consults with the customer through data gathered and site assessments. Provides field proposals for retrofits, upgrades and or enhancements to existing equipment. Assists sales by providing technical recommendations for sales leads., • Manages assigned work to meet professional and efficient execution of time and customer satisfaction. Reports problems or changes to management immediately. Interfaces with branch manager, service manager, service project manager or subcontractors on projects to coordinate activities as required ethically and professionally., • Provides sketches of field changes and discrepancies for engineering corrections and drawings. May assist with job layouts and bid proposals., • Install and modify software and graphics., • Communicates with customers upon arrival and before leaving the work site. Ensures high levels of customer satisfaction. Meets regularly with customers to become familiar with operating problems. Keeps customer informed on the service provided, outstanding issues and recommends system enhancements, upgrades, and replacement. Promotes the sale of add-on work., • Adheres to all Johnson Controls and customer safety standards. Provides safety leadership and instruction to all control's technicians in the branch. Provides safety awareness while working onsite with Johnson Controls subcontractors., • Trains the customer in control systems operations. Delivers manuals and documentation to the customer for training needs as required., • Provides mentorship for certification of Controls Technicians and Service Technicians on complex building automation systems. Coaches, supports and trains the technical workforce on non-complex, non-critical equipment., • Compiles job documentation, such as certificate of completion, customer training form, training certificates and punch lists., • Conducts extensive self-study (reading, research and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company., • Other duties related to the installing, commissioning and servicing of building controls and facilities management systems and energy management systems, as assigned., • Assists in the design and configuration of building control systems as defined by the contract documents. Creates flow diagrams, sequence of operations, and bill of material, network layouts and electrical schematics as required., • Assists in developing and testing software programs necessary to operate the system per the project requirements' intent., • Compiles and/or completes project as built and close-out documentation., • Assists in the coordination and creation of necessary drawings and equipment schedules for submittals and installation., • Selects, orders, and tracks the delivery of materials for assigned., • Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation., • May provide field change information to the project team for the creation of as-built drawings and software., • Keeps management and JCI contractor or customer informed of job progress and issues., • Assists in performing site-specific training for owner / operator on the total building control system., • Participates in release meeting with project field team., • Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities., • Provide quotes to support recommendations and solutions. What we look for Required • Be a dedicated member of a North America Branch team willing to learn and be responsible for system trouble shooting, repair and aftermarket services for this fast-growing business., • Minimum of Six (6) years Commercial Controls troubleshooting experience in the HVAC industry. This includes buildings, chiller plants and systems., • Vocational School program graduate or associate's degree in a technical field, or two years’ experience in servicing electronic and or mechanical systems., • Demonstrated ability to install and/or service electronic control systems and HVAC equipment., • Effective communication skills to represent Johnson Controls on customer sites., • Possesses the ability to explain technical information to technical and non-technical people., • Demonstrate effective writing skills as well as understanding of programs and software applications., • Knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems. HIRING HOURLY RANGE: $28-39 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. The posted salary range reflects the target compensation for this role. However, we recognize that exceptional candidates may bring unique skills and experiences that exceed the typical profile. If you believe your background warrants consideration beyond the stated range, we encourage you to apply. To support an efficient and fair hiring process, we may use technology assisted tools, including artificial intelligence (AI), to help identify and evaluate candidates. All hiring decisions are ultimately made by human reviewers. For details, please visit the About Us tab on the Johnson Controls Careers site at ___

Job Description Join Our Team as a Housekeeper at the Tru by Hilton Wilmington Wrightsville Beach At Parks Hospitality Group, we believe that every detail matters in creating an exceptional guest experience. We’re looking for a dedicated and reliable Housekeeper to help us maintain our high standards of cleanliness and comfort. Your work will make a difference every day, ensuring our guests feel at home in a spotless environment. What You’ll Do: • Keep guest rooms spotless, ensuring they meet the highest cleanliness standards., • Replace linens and restock room amenities, keeping things fresh for every guest., • Maintain public spaces, including hallways and restrooms, ensuring cleanliness and safety., • Report any maintenance needs to ensure the property remains in top condition., • Provide a high level of customer service, addressing guest needs promptly., • A high school diploma or equivalent., • Previous housekeeping experience is preferred., • Comfort with cleaning equipment and chemicals., • An eye for detail and the ability to stay organized., • Strong communication skills and a team-focused attitude., • Flexibility to work weekends and holidays., • Competitive pay and comprehensive benefits, including medical and dental from day one for full-time team members., • Paid time off (PTO) for all team members, because we value your well-being., • Team Member Recognition Program to celebrate your achievements., • Discounts on hotel stays and dining. At Parks Hospitality Group, we strive for excellence in everything we do. Our team is dedicated to delivering outstanding service and creating memorable experiences for our guests. We offer a supportive and collaborative environment that promotes growth and rewards hard work. Location: Tru by Hilton Wilmington Wrightsville Beach - 1010 Ashes Dr, Wilmington, NC 28405

Job DescriptionDescription: We are looking for an experienced, detail-oriented individual to join our team. As Room Inspector, you will be responsible for inspecting our hotel rooms to ensure they meet all standards of cleanliness, safety, and comfort. You will be responsible for consistently meeting the hotel's quality assurance standards for each room, as well as interacting with hotel guests to ensure their satisfaction. If you think you have the attention to detail and customer service skills necessary to be successful in this role, we want to hear from you. Job Responsibilities • Perform daily walk-throughs of all guest rooms and common areas to ensure they meet the hotel's standards of cleanliness and maintenance, • Inspect all furniture, fixtures, and equipment in each room and common area to ensure they are in good working order, • Report any safety hazards and maintenance issues to the appropriate personnel, • Collaborate with housekeeping staff to resolve any deficiencies or special requests in guest rooms, • Respond to guest inquiries and complaints in a prompt and courteous manner, • Ensure all safety regulations, hotel policies, and procedures are followed, • Provide guests with information on hotel services and amenities, • Stay up-to-date on all hotel policies and procedures as well as local attractions, • Maintain accurate records of inspections and maintenance activities, • Monitor room inventory and occupancy ratesRequirements:, • Ability to inspect hotel rooms for cleanliness and maintenance issues, • Ability to work independently and as part of a team, • Ability to interact with guests and hotel staff in a professional and courteous manner, • Attention to detail, • Ability to follow safety protocols, • Ability to lift up to 50 lbs, • Ability to read and understand instructions, • Ability to identify potential hazards, • Experience in hospitality or housekeeping is a plus, • Ability to use cleaning tools and equipment, • Ability to work flexible hours, including evenings and weekends

Job Description O2 Fitness offers the best in fitness equipment, personal training and group exercise throughout the Carolinas. We promise to provide a welcoming, motivating and clean environment with a professional and caring staff to help our clients achieve real results. We are committed to helping our members create a whole-body approach to wellness by offering an all-inclusive health and fitness experience. We recognize that each members fitness journey is different, thus, we offer a wide variety of group classes, small group activities and personal training. The Janitor / Cleaner is responsible for creating a culture of cleanliness by maintaining a clean, sanitary, comfortable and safe environment for Members and staff. Responsibilities • Effectively and efficiently handle Member situations, concerns, and feedback., • Follow all company safety and security procedures, and maintain all cleaning equipment and materials in a safe and sanitary working condition in compliance with OSHA guidelines, • Monitor and report necessary repairs, replacements, maintenance issues, and safety hazards, • Operate mechanical cleaning equipment, • Vacuum, clean carpets, rugs and draperies, • Clean, dust, and polish furniture, metal fixtures, fittings, and ceiling fans, • Empty and clean trash containers in a sanitary manner, • Clean wash basins, mirrors, and showers, • Wipe down glass surfaces and windows, • Sweep, scrub, mop and polish floors, • Janitorial and/or Housekeeping experience preferred, • Personal passion for the brand, • Ability to manage multiple priorities in a fast-paced environment while paying attention to detail, • Strong time management and organizational skills, • Must be highly motivated, • Physical stamina and mobility including ability to reach, kneel and bend Hourly rate

Job Description Overview Role: Laundry Worker Join Healthcare Services Group (HCSG) as a Laundry Worker, where you will play a crucial role in maintaining the cleanliness and availability of linens and garments in a long-term care facility. At HCSG, we are passionate about positively impacting the communities we serve. If you share our commitment to excellence and enhancing customer and resident experiences, join us and make a difference! Responsibilities • Collect, sort, wash, dry, fold, and distribute linens and personal clothing., • Operate laundry equipment safely and efficiently., • Maintain records of laundry activities and report any maintenance or safety issues to the supervisor., • Follow infection control and universal precautions policies to ensure a sanitary environment., • Interact positively with residents, staff, and guests, providing excellent customer service., • All other duties as assigned. Qualifications • High school diploma or equivalent preferred., • Previous laundry experience is preferred but not required., • Maintain a positive attitude and effectively communicate with building occupants, administration, and HCSG leadership to perform daily tasks., • Compliance with COVID-19 vaccination policies, • Must be able to lift/carry a maximum of 50 pounds, push/pull a maximum of 50 pounds, stand, sit, bend and walk for extended periods., • Must be able to work around cleaning products., • Able to follow oral and written instructions, and perform routine, repetitive tasks daily., • Residency within the service area required Ready to Join Us? If you're looking for a role where you can contribute to a clean and welcoming environment and be part of a supportive and dedicated team, apply now and start making a difference at HCSG!

Job Description ABOUT OUR ROLE The Room Attendants (hotel housekeepers) are expected to maintain cleanliness, orderliness, and hygiene standards throughout the hotel's guest rooms, common areas, and other designated spaces. ABOUT OUR VALUES We believe in guiding the adventure, saying yes to possibilities, and working together as one team. With excellence at our core and a touch of magic in every detail, we create experiences that are authentic, elevated, and unforgettable. ESSENTIAL FUNCTIONS • Cleaning and sanitizing all surfaces in guest rooms and public common areas, including furniture, fixtures, and electronic devices., • Making beds, changing linens, and replacing towels and amenities., • Vacuuming carpets, rugs, and upholstery., • Dusting and wiping down surfaces such as desks, tables, and countertops., • Emptying trash bins and replacing liners., • Restocking supplies such as towels, toiletries, coffee, and tea., • Cleaning and disinfecting bathroom fixtures, including sinks, toilets, tubs, and showers., • Checking for any maintenance issues or damages and reporting them to the appropriate department., • Checking guest rooms for any items left behind by guests and following hotel procedures for handling lost and found items., • Following established protocols for handling cleaning chemicals and using personal protective equipment when necessary., • Adhering to health and safety regulations and guidelines to maintain a safe and healthy environment for guests and staff., • Participating in training sessions on safety procedures and emergency protocols., • Providing friendly and courteous service to guests when interacting with them in hallways or guest rooms. Minimum Qualifications: • Communicate clearly, whether in writing (e.g., giving written instructions) or verbally, • Ability to communicate in English, verbal and written, • A great smile, attitude and desire to work with an energetic team!, • Experience in a hotel or resort setting REQUIREMENTS • Must be able to remain upright continuously on a firm surface for an 8–10-hour shift., • Must be able to move at least 20 pounds up to 5 feet high without another person's aid., • Requires manual dexterity, grasping, writing, standing, sitting, walking, repetitive motions, bending, and climbing. BENEFITS Company Benefits and Perks Full Time Part Time Seasonal Medical (with company contribution) Eligible Dental (with company contribution) Eligible Vision (with company contribution) Eligible Paid Time Off Eligible 401(k) (with company match) Eligible Eligible Sick Time Eligible Eligible Employee Dining Discounts Eligible Eligible Eligible Employee Marketplace Discounts Eligible Eligible Eligible SCHEDULE Hospitality demands a flexible schedule that may require extended hours as the business requires coverage including seasonality– on any day at any hour, including evenings, weekends, and holidays. PAY RATE $17.00/hour JOB STATUS Seasonal Full Time FLSA Non-Exempt EQUAL EMPLOYMENT OPPORTUNITY Trailborn is an Equal Opportunity Employer. We celebrate diversity and are committed to fostering an inclusive and supportive workplace for all employees. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, genetic information, or any other protected status under applicable federal, state, or local laws. If you require assistance or an accommodation due to a disability, please inform us during your application process. The specific statements shown in each section of this Job Description are not intended to be all-inclusive. They represent typical elements and criteria considered necessary to perform the job successfully. The job’s responsibilities/tasks may be modified and/or expanded over time without prior notice. The Company will try to give as much notice as practical when changes are made.

Job Description Join Our Team as a Housekeeper at the Tru by Hilton Wilmington Wrightsville Beach At Parks Hospitality Group, we believe that every detail matters in creating an exceptional guest experience. We’re looking for a dedicated and reliable Housekeeper to help us maintain our high standards of cleanliness and comfort. Your work will make a difference every day, ensuring our guests feel at home in a spotless environment. What You’ll Do: • Keep guest rooms spotless, ensuring they meet the highest cleanliness standards., • Replace linens and restock room amenities, keeping things fresh for every guest., • Maintain public spaces, including hallways and restrooms, ensuring cleanliness and safety., • Report any maintenance needs to ensure the property remains in top condition., • Provide a high level of customer service, addressing guest needs promptly., • A high school diploma or equivalent., • Previous housekeeping experience is preferred., • Comfort with cleaning equipment and chemicals., • An eye for detail and the ability to stay organized., • Strong communication skills and a team-focused attitude., • Flexibility to work weekends and holidays., • Competitive pay and comprehensive benefits, including medical and dental from day one for full-time team members., • Paid time off (PTO) for all team members, because we value your well-being., • Team Member Recognition Program to celebrate your achievements., • Discounts on hotel stays and dining. At Parks Hospitality Group, we strive for excellence in everything we do. Our team is dedicated to delivering outstanding service and creating memorable experiences for our guests. We offer a supportive and collaborative environment that promotes growth and rewards hard work. Location: Tru by Hilton Wilmington Wrightsville Beach - 1010 Ashes Dr, Wilmington, NC 28405

Environmental, Health & Safety Coordinator About the Opportunity A well-established industrial manufacturing company is seeking an Environmental, Health & Safety Coordinator to support site-level safety, environmental compliance, and injury-prevention initiatives. This role is responsible for helping maintain a safe, compliant, and organized workplace by supporting safety programs, environmental reporting, training, inspections, audits, and incident follow-up. This is a hands-on role that works closely with production employees, site leadership, operators, and cross-functional teams to promote a proactive safety culture and ensure compliance with applicable environmental and safety regulations. Key Responsibilities • Support site safety and environmental compliance programs to help prevent injuries and maintain regulatory compliance., • Identify, evaluate, and help eliminate workplace hazards related to equipment, tooling, materials, work practices, and manufacturing processes., • Conduct regular workplace inspections, audits, and safety walks to ensure compliance with OSHA, environmental, housekeeping, and 5S requirements., • Maintain current knowledge of applicable local, state, and federal environmental and safety regulations., • Support compliance with hazardous waste, universal waste, water quality, DOT, RCRA, and OSHA requirements., • Assist with communication, documentation, and recordkeeping related to regulatory agencies and compliance activities., • Coordinate external environmental and safety inspections and audits, including follow-up on corrective actions with the appropriate internal teams., • Maintain required regulatory reporting, including environmental, hazardous material, wastewater, stormwater, and related compliance documentation., • Support emergency response programs, waste minimization efforts, inspections, permitting, and manifest/waste recordkeeping., • Coordinate and document emergency drills, including fire and severe-weather drills., • Conduct safety training programs for employees, operators, and staff., • Support initiatives focused on reducing injuries, improving safety performance, and strengthening safety culture., • Participate in incident investigations, root cause analysis, and corrective action follow-up., • Audit safety expectations, work instructions, and quality practices to help ensure compliance and accountability., • Partner with operations, maintenance, quality, and leadership teams to support safe and compliant production activities., • Support continuous improvement efforts tied to safety, environmental compliance, housekeeping, and operational best practices. Qualifications • Bachelor’s degree in Occupational Health, Safety, Industrial Hygiene, Environmental Science, Health Physics, or a related field preferred., • 2+ years of experience in an industrial or manufacturing environment preferred., • Working knowledge of OSHA rules and regulations., • Exposure to RCRA, DOT, hazardous waste, universal waste, and water-quality requirements preferred., • Experience in metal processing, welding, metallurgy, heavy manufacturing, or similar industrial environments preferred., • Experience supporting safety training, audits, inspections, incident investigations, and regulatory documentation., • Six Sigma Green Belt or related continuous improvement exposure is a plus. Ideal Candidate Profile The ideal candidate is a hands-on EHS professional who enjoys being visible on the manufacturing floor, building trust with employees, and helping create a safer workplace. This person should be detail-oriented, organized, and comfortable balancing compliance documentation with practical, floor-level safety support. They should bring a proactive mindset, strong communication skills, and the ability to work effectively with both hourly employees and site leadership. Key Skills & Competencies • Environmental, health, and safety compliance, • OSHA awareness and safety program support, • Hazard identification and risk reduction, • Incident investigation and root cause analysis, • Safety training and employee education, • Regulatory reporting and documentation, • Workplace inspections and audits, • 5S, housekeeping, and safety walks, • Waste management and environmental compliance support, • Strong written and verbal communication skills, • Organization and attention to detail, • Cross-functional collaboration, • Problem solving and critical thinking, • Sense of urgency and accountability, • Computer proficiency Work Environment & Physical Requirements • Manufacturing/industrial environment., • Ability to stand or walk for extended periods, including up to 4 continuous hours., • Ability to lift up to 30 lbs., • Must be able to work overtime or shift schedules as needed., • Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions. Why This Role This is a strong opportunity for an EHS professional who wants to support site-level safety and environmental compliance in a hands-on manufacturing environment. The role offers exposure to safety programs, environmental reporting, employee training, inspections, audits, and continuous improvement while working closely with both production teams and leadership.

Job DescriptionDescription: As a Housekeeper at Home2 Suites - Wilmington Medical Park District, you will be an essential member of our team, ensuring that our guests have a clean, comfortable and enjoyable stay. Your primary responsibilities will include cleaning and maintaining guest rooms to the highest standards of cleanliness and hygiene. We are looking for a dedicated, detail-oriented individual who takes pride in their work and contributes positively to our team environment. Key Responsibilities • Guest Room Cleaning:, • Thoroughly clean and sanitize guest rooms, including making beds, dusting, vacuuming, and cleaning bathrooms., • Replace used linens with fresh ones, ensuring beds are made to hotel standards., • Restock room amenities and supplies as needed., • Inventory Management:, • Monitor and manage inventory of cleaning supplies and room amenities., • Report any shortages or needed repairs to the Executive Housekeeper., • Guest Service:, • Provide excellent customer service by responding promptly and courteously to guest requests or concerns., • Report any issues or maintenance needs in guest rooms or common areas to the appropriate personnel., • Safety and Compliance:, • Follow all safety procedures and protocols, including the proper handling of cleaning chemicals., • Adhere to hotel policies and procedures to maintain a safe and clean work environment., • Team Collaboration:, • Work closely with other housekeeping staff and hotel departments to ensure efficient operations and guest satisfaction., • Participate in team meetings and training sessions as required. Requirements: Qualifications: • High school diploma or equivalent preferred., • Previous housekeeping or cleaning experience is a plus but not required., • Ability to work efficiently both independently and as part of a team., • Strong attention to detail and organizational skills., • Good communication skills and a positive attitude., • Physical stamina and the ability to lift and move heavy objects as needed.

Job DescriptionDescription: The Company Cogir Senior Living, based in Scottsdale, Arizona, proudly oversees a network of senior living communities spanning 11 states nationwide. As a trusted leader in senior housing, we are dedicated to growth while maintaining our commitment to exceptional care for our residents and a supportive, growth-focused environment for our team members. At Cogir, our culture is rooted in the core values of human focus, creativity, and excellence, which inspire us to continuously improve and achieve excellence in all we do. Join us in our mission to enrich the lives of our residents while building a meaningful and fulfilling career! WHAT WE OFFER • Competitive wages, training, and growth opportunities., • Early access to paycheck (pay on demand)., • Health, Dental, Vision, and Life Insurance., • Paid Vacation, Holidays, and Sick Leave., • 401K with company match., • Free meals at work., • Employee Assistance Program. Our housekeepers are responsible for maintaining a clean, safe, and comfortable environment for our residents, staff, and visitors. This role includes performing various cleaning tasks, ensuring high standards of sanitation and hygiene, and contributing to the overall well-being of our residents by creating a welcoming and orderly living space. Responsibilities include cleaning all public and common areas, bathrooms, offices, and resident apartments, following established schedules, while interacting in a friendly and courteous manner to ensure resident and family member satisfaction. KEY RESPONSIBILITIES • Perform routine cleaning of resident rooms, common areas, dining spaces, and administrative offices, including dusting, vacuuming, mopping, and sanitizing surfaces., • Clean and disinfect bathrooms, including sinks, toilets, showers, and mirrors., • Empty trash and recycling bins and replace liners., • Launder and replace linens, towels, and other textiles as needed., • Follow the community cleaning schedule and protocol according to community guidelines and follow established safety precautions., • Build positive relationships with residents by engaging in friendly, respectful interactions., • Respect residents’ privacy and preferences while cleaning their living spaces., • Report any maintenance issues, safety concerns, or resident needs changes to the supervisor., • Use cleaning equipment and chemicals safely and according to instructions., • Follow infection control and sanitation protocols, including the proper handling and disposal of waste. Requirements: CANDIDATE QUALIFICATIONS Education and certificates: • At least one (1) year of housekeeping experience in a senior living, healthcare, or hospitality setting (hotels) is required., • Strong attention to detail and commitment to maintaining cleanliness., • Good time management and organizational skills., • Friendly and professional demeanor., • Knowledge of cleaning chemicals and their uses, as well as cleaning equipment, is a plus., • Ability to maintain confidentiality and adhere to ethical standards.

Job Description Overview Role: Housekeeper Join Healthcare Services Group (HCSG) as a Housekeeper, where you will play a vital role in maintaining a clean and safe environment in a long-term care facility. At HCSG, we are passionate about positively impacting the communities we serve. If you share our commitment to excellence and enhancing customer and resident experiences, join us and make a difference! Responsibilities • Perform daily housekeeping tasks, including cleaning resident rooms, bathrooms, common areas, and offices., • Ensure proper cleaning and sanitation of all areas following established procedures and safety guidelines., • Maintain records of cleaning activities and report any maintenance or safety issues to the supervisor., • Follow infection control and universal precautions policies to ensure a sanitary environment., • Interact positively with residents, staff, and guests, providing excellent customer service., • All other duties as assigned. Qualifications • High school diploma or equivalent., • Previous housekeeping experience is preferred but not required., • Maintain a positive attitude and effectively communicate with building occupants, administration, and HCSG leadership to perform daily tasks., • Compliance with COVID-19 vaccination policies, • Must be able to lift/carry a maximum of 50 pounds, push/pull a maximum of 50 pounds, stand, sit, bend and walk for extended periods., • Must be able to perform routine, repetitive tasks continuously., • Must be able to work around cleaning products., • Able to follow oral and written instructions, and perform routine, repetitive tasks daily., • Residency within the service area required Ready to Join Us? If you're looking for a role where you can contribute to a clean and welcoming environment and be part of a supportive and dedicated team, apply now and start making a difference at HCSG!

Job DescriptionDescription: As a Room Attendant, you will be responsible for ensuring that guest rooms are maintained to the highest standard of cleanliness and comfort. You will be responsible for cleaning, vacuuming, dusting, changing linens, and restocking amenities in the guest rooms. You will also need to be able to interact with guests in a friendly and professional manner, and be able to handle any special requests that they may have. If you are someone who is highly organized, pays attention to detail, and enjoys providing excellent customer service, then this role is perfect for you! Job Responsibilities • Clean and stock guest rooms, ensuring that all amenities and supplies are in place, • Ensure that all safety and security standards are met, • Change and replenish bed linens, towels, and guest amenities, • Vacuum carpets, dust furniture, and polish fixtures, • Inspect all furniture and fixtures for cleanliness and repair, • Report any maintenance issues to the supervisor, • Respond to guests’ requests in a timely and professional manner, • Follow all housekeeping policies and procedures, • Monitor supply levels and restock items as required, • Ability to work in a fast-paced environment, • Excellent organizational skills, • Ability to take initiative and work independently, • Knowledge of safety and sanitation standards, • Excellent customer service skills, • Ability to lift up to 50 lbs, • Ability to push and pull up to 150 lbs, • Ability to stand and move for extended periods of time, • Ability to bend, stoop, and kneel, • Ability to reach above and below shoulder level, • Ability to follow verbal and written instructions, • Ability to understand and execute cleaning standards, • Ability to use basic cleaning equipment, • Ability to problem solve and troubleshoot, • Flexible with scheduling, • High school diploma or GEDRequirements:, • Ability to work in a fast-paced environment, • Excellent organizational skills, • Ability to take initiative and work independently, • Knowledge of safety and sanitation standards, • Excellent customer service skills, • Ability to lift up to 50 lbs, • Ability to push and pull up to 150 lbs, • Ability to stand and move for extended periods of time, • Ability to bend, stoop, and kneel, • Ability to reach above and below shoulder level, • Ability to follow verbal and written instructions, • Ability to understand and execute cleaning standards, • Ability to use basic cleaning equipment, • Ability to problem solve and troubleshoot, • Flexible with scheduling, • High school diploma or GED

Job DescriptionDescription: The Housekeeping Inspector for Residence Inn Landfall is responsible for ensuring property guestrooms/suites, all public space, and associate areas are clean and well maintained. Completes inspections and holds housekeeping staff accountable for corrective action and to Corporate and Brand policies, procedures and standards. Position assists in ensuring guest and Associate satisfaction while maintaining the operating budget. PREREQUISITES/QUALIFICATIONS: · Experience in housekeeping or related professional area · Command of English including speaking, reading, writing · Familiar with inventory controls and ordering · Effective communication skills · High energy and professional demeanor · Basic computer skills Requirements: · This position require weekends (Saturday and/or Sunday). · Ensures guest room status is communicated to Front Desk in a timely and efficient manner · Inspects guest rooms, public areas and staff areas on a daily basis · Inventories stock to ensure adequate supplies · Supports and supervises an effective inspection program · Ensures all Associates have proper supplies, equipment, safety equipment, and uniforms · Communicates quickly and efficiently to management and maintenance areas that need attention and maintenance · Ensures hotel is prepared to successfully complete a Quality Assurance audit · Recognizes Associates and uses an “open door policy” for good work and guest relations

Our client is looking for Advanced Manufacturing Process Engineer with an experience of Process Automation, Equipment Integration and Capital Project Experience. Client is very specific about work authorization. Please do not consider applying if it's C2C. Key Responsibilities • Lead end-to-end equipment integration projects from concept through design, installation, conversion, debug/commission, and handoff to the Qualification team., • Coordinate cross-functional teams including manufacturing, process engineering, facilities, quality, maintenance, EHS, automation, and supply chain, • Define equipment requirements, integration scope, timelines, milestones, and resource needs, • Manage vendor relationships for equipment design, FAT/SAT, installation, troubleshooting, and acceptance, • Ensure compatibility of equipment with facility infrastructure, utilities, controls systems, automation platforms, and production processes, • Oversee equipment setup, startup, testing, debugging, and performance optimization, • Drive issue resolution during installation and conversion through structured troubleshooting and root cause analysis, • Ensure compliance with safety, quality, regulatory, and internal engineering standards, • Prepare and maintain project documentation including specifications, change controls, SOPs, work instructions, risk assessments, and turnover packages, • Track project progress, risks, budgets, and schedules; provide regular status updates to stakeholders, • Support training of operations and maintenance personnel on newly integrated equipment, • Lead continuous improvement efforts to improve equipment reliability, uptime, throughput, and maintainability Required Qualifications • Bachelor’s degree in Engineering, Manufacturing, Materials, Industrial Technology, or a related field, post-graduation degree is a plus, • Several years of experience in equipment engineering, equipment integration, manufacturing engineering, capital project execution, and scale up, • Experience leading equipment installation, startup, and commissioning activities, • Strong knowledge of manufacturing equipment, facilities integration, and production support processes, • Proven project management and cross-functional coordination skills, • Experience with troubleshooting complex equipment and system interactions, • Equipment design (CAD), • Six Sigma certification, Root cause analysis, • Strong data analytics capabilities – SPC, JMP or MiniTab/R/Origin Pro, • Strong written and verbal communication skills

Job Description TerraBella Senior Living proudly serves thousands of residents and families offering a full range of lifestyle and care options including Active Independent Living, Assisted Living, Memory Care, and short-term Respite. With a foundation rooted in purpose, hospitality, and connection, TerraBella fosters communities where both residents and Team Members thrive. As part of one of the largest senior living organizations in America, TerraBella communities have earned Great Place to Work® certifications from 2022–2026. At TerraBella, culture, growth, and heart define who we are. We continually aspire and invest in learning and development opportunities that support our team members’ professional growth, ensuring every team member has the tools to build a meaningful and rewarding career. TerraBella Senior Living is looking for a Housekeeper to join our community_______________________. Responsibilities: • Performs cleaning duties according to schedule (daily, weekly, monthly) in assigned areas such as apartment homes, common areas, lounges and offices., • Sweeps, dusts, dust mops, and wet mops all floors and stairways; spot cleans and vacuums floors, rugs, carpets and runners. Rotates runners in hallways and entryways., • Cleans, sanitizes, and polishes both lavatory, shower and sink fixtures and facilities; stocks dispensers as necessary., • Scrubs bath and shower room tiles, woodwork, window frames, and sills., • Maintains equipment and materials needed to perform work in a clean and orderly condition., • Collects trash and refuse from work areas and places in designated pick-up areas., • Responsible for collecting, cleaning and redistributing the community laundry., • Responsible for maintaining the commercial laundry in a clean, orderly and sanitary condition., • Ensures cleaning chemicals are kept stored and locked when not in use., • Ensures any cords, carts, equipment and other hazards are kept out of the way at all times, not blocking exits and in compliance with fire codes., • Reports any needed repairs and supply and equipment needs to the Lead Housekeeper., • High School diploma or equivalent preferred., • Previous housekeeping experience preferred., • Ability to communicate effectively speaking the primary language of the residents., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals., • Must demonstrate an interest in working with a senior population., • Interacts with guests, residents, and staff in a courteous and friendly manner., • Team Member is regularly required to stand; walk; use hands to finger, handle, or feel and reach with hands and arms., • Team Member is frequently required to climb or balance; stoop, kneel, crouch, or crawl. The Team Member is occasionally required to sit., • Team Member must regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision and color vision. Why Join Us Discovery Senior Living Earned Coveted Great Place to Work Certification for 2025-2026! A large part of what makes Discovery different from other companies in this industry is our willingness to embrace change. At Discovery Senior Living, we are constantly challenging how we are doing things to ensure the lifestyle we are offering our residents is absolutely the greatest value proposition in the marketplace. It’s just as important to us that the environment and culture for our team members are constantly refreshed. In addition, embracing and even encouraging change brings a never-ending supply of new energy to our business and our culture. That energy translates to other far-reaching positive impacts on our residents as well as our team members. Find out what makes working at Discovery unique in the world of senior living. Discover Your Purpose! Our Culture & Values So often, what brings people together is deeply rooted in who we are and what we stand for. At Discovery Senior Living, we’re unified by certain, core values, which we call our “Pillars of Excellence.” They make up the fabric of our company, and include TEAMWORK, INTEGRITY, PERFORMANCE, ACCOUNTABILITY, COMPASSION, HARD WORK and CREATIVITY. Individually, they are our virtues, and together, they make up a roadmap which helps us foster innovation and success. Benefits You’ll Enjoy For eligible employees, we offer a comprehensive benefits package that includes competitive pay, medical, dental, vision, life, and disability insurance, paid time off and holidays, a 401(k) with employer match, paid training and career growth opportunities, wellness-related benefits, and additional support through our Employee Assistance Program (EAP). Equal Opportunity Employer We are proud to be an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all team members. EOE D/V A Note to Applicants This job description outlines the general nature and level of responsibilities for this role and is not an exhaustive list of all duties. Qualified individuals with disabilities, as defined by the ADA, must be able to perform the essential job functions with or without reasonable accommodation, as determined on a case-by-case basis. Agency Policy We do not accept unsolicited resumes from staffing agencies. Please refrain from contacting hiring managers directly. Employment Scam Warning We only post jobs on our official careers site and accept applications through that platform. We do not conduct interviews via text or social media or ask for personal or banking information. Regulatory Compliance & Background Screening Discovery Senior Living complies with all applicable federal, state, and local employment laws and regulatory requirements governing hiring practices, background screening, and workforce eligibility. Employment may be contingent upon successful completion of state-mandated and/or federally required background screenings, which may include criminal history checks, fingerprint-based screening, Level 2 background screening, registry verification, and other screenings required for healthcare and senior living roles with direct or indirect resident access. Certain positions may be subject to additional requirements under federal programs, including CMS, Medicare, and Medicaid regulations, as well as state-specific licensing or regulatory agencies. Screening requirements vary by role and jurisdiction, and candidates must meet all applicable standards as a condition of employment. These measures support regulatory compliance and help maintain a safe, secure environment for residents, families, and team members. Employment in Florida is contingent upon completion of a Level 2 background screening in accordance with Florida AHCA requirements. Applicants will be required to complete fingerprinting and background screening through the AHCA Clearinghouse. For more information, please visit: . Thank you for your interest in TerraBella Senior Living careers. If you have any questions about the position you are applying for, please contact the community directly. No agencies, please. We do not accept any unsolicited resumes from agencies under any circumstances. We receive inquiries from agencies daily. Agencies should not direct any inquiries or emails to hiring managers. Thank you. EOE D/V

Job Description O2 Fitness offers the best in fitness equipment, personal training and group exercise throughout the Carolinas. We promise to provide a welcoming, motivating and clean environment with a professional and caring staff to help our clients achieve real results. We are committed to helping our members create a whole-body approach to wellness by offering an all-inclusive health and fitness experience. We recognize that each members fitness journey is different, thus, we offer a wide variety of group classes, small group activities and personal training. The Janitor / Cleaner is responsible for creating a culture of cleanliness by maintaining a clean, sanitary, comfortable and safe environment for Members and staff. Responsibilities • Effectively and efficiently handle Member situations, concerns, and feedback., • Follow all company safety and security procedures, and maintain all cleaning equipment and materials in a safe and sanitary working condition in compliance with OSHA guidelines, • Monitor and report necessary repairs, replacements, maintenance issues, and safety hazards, • Operate mechanical cleaning equipment, • Vacuum, clean carpets, rugs and draperies, • Clean, dust, and polish furniture, metal fixtures, fittings, and ceiling fans, • Empty and clean trash containers in a sanitary manner, • Clean wash basins, mirrors, and showers, • Wipe down glass surfaces and windows, • Sweep, scrub, mop and polish floors, • Janitorial and/or Housekeeping experience preferred, • Personal passion for the brand, • Ability to manage multiple priorities in a fast-paced environment while paying attention to detail, • Strong time management and organizational skills, • Must be highly motivated, • Physical stamina and mobility including ability to reach, kneel and bend Hourly rate

Job Description We are looking for a responsible candidate to maintain and protect our facilities. The external and internal appearance of a building reflects on the occupants. It is important for an Environmental Services Technician to be careful and thorough in working, cleaning and tidying the premises. The ideal candidate will be experienced in an environmental services role focused on cleanliness and building upkeep. A keen eye for detail and diligence are also imperative in environmental service jobs. Responsibilities • Ensure spaces are prepared for the next day by taking out trash, tidying furniture and dusting surfaces, • Sweep and mop floors and vacuum carpets, • Ensure paper products, sanitizer and soaps are available for use, • Wash and sanitize toilets, sinks and showers and restock disposables (e.g. soap), • Utilize insecticides to prevent infestation by dangerous pests, • Report major damages to the Maintenance department, • Knowledge of use and maintenance of cleaning equipment and appliances, • Knowledge of safe disposal of chemical liquids and other hazardous components, • Attention to detail and conscientiousness, • Courteous and compassionate communication skills with Residents, Family members and other staff, • Must be punctual, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Training & Development