Trabajos osha en Rochester, New YorkCrear alertas

Bestica is seeking a travel nurse RN Acute Care Supervisor for a travel nursing job in Rochester, New York. Job Description & Requirements • Specialty: Acute Care, • Discipline: RN, • Start Date: 12/01/2025, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, • Employment Type: Travel Certifications: ALCS, BLS, PALS* Skills: Inpatient Acute Care, MS/Tele, Code Management, Crisis Intervention/Management, De-escalation techniques, Emergency preparedness, Facility/Bed Diversion, Managing Assaultive Behavior, Restraints - physical/chemical, Internal, HIPAA guidelines (Health Insurance Portability and Accountability Act), Death of a patient - documentation and process, Discharge AMA, Fitness for duty, Risk Management, Sentinel events-monitoring and reporting, Customer Service, Experience managing narcotic diversion, Functions as clinical expert resource, Incident reporting, Infection control, Isolation procedures, Starting and maintaining IVs, Knowledge of regulatory requirements- DPH, TJC, OSHA, etc., Organizational escalation process for facility, Supervising nursing care delivered on all units organizationally, Workplace safety, Centralized staffing, Experience with productivity standards and staffing requirements, Coaching and counseling to performance standards Previous Charge Experience Required EPIC Required 3086041\n\nCertifications: ALCS, BLS, PALS*\nSkills: Inpatient Acute Care, MS/Tele, Code Management, Crisis Intervention/Management, De-escalation techniques, Emergency preparedness, Facility/Bed Diversion, Managing Assaultive Behavior, Restraints - physical/chemical, Internal, HIPAA guidelines (Health Insurance Portability and Accountability Act), Death of a patient - documentation and process, Discharge AMA, Fitness for duty, Risk Management, Sentinel events-monitoring and reporting, Customer Service, Experience managing narcotic diversion, Functions as clinical expert resource, Incident reporting, Infection control, Isolation procedures, Starting and maintaining IVs, Knowledge of regulatory requirements- DPH, TJC, OSHA, etc., Organizational escalation process for facility, Supervising nursing care delivered on all units organizationally, Workplace safety, Centralized staffing, Experience with productivity standards and staffing requirements, Coaching and counseling to performance standards\n\nPrevious Charge Experience Required\nEPIC Required About Bestica We are a trusted provider of solutions in Information Technology and Healthcare sectors to the DoD, Federal and Commercial markets. Our guiding principle and core values help us care for our people and the community; and build a culture of excellence which in turn helps us achieve our organizational objective of exceeding customer’s expectations in each and every project. Headquartered in San Antonio, TX, we were founded in 2005 and are certified as an 8(a) Business.

ND Global Consulting Services is seeking a travel nurse RN House Supervisor for a travel nursing job in Rochester, New York. Job Description & Requirements • Specialty: House Supervisor, • Discipline: RN, • Start Date: 11/30/2025, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, nights, • Employment Type: Travel Saturday, Sunday and holidays – flexibility for being available any portion of 8a-4p/4p-12a/12a-8. EOW Locals accepted: (Y/N) What is the local radius rule? No locals (75 miles) Pending License accepted: (Y/N) No RTO Restrictions: We will not allow more than 1 week RTO in a contract Patient Diagnoses: At Unity Hospital, the house supervisor is the leader in house responsible for 311+ beds, including ED, our Family Birth place, Surgical Services, 14 medical surgical units, and 1 20-bed ICU. Our ICU charge and providers serve as the RRT and Code Team along with support from the supervisor. We utilize a centralized staffing office with staffing coordinators covering 80 hours/week. We also have an off-shift nurse manager that works 4p-2a - 4 shifts per week to support the building. Certifications: ALCS, BLS Skills: Inpatient Acute Care, MS/Tele, Code Management, Crisis Intervention/Management, De-escalation techniques, Emergency preparedness, Facility/Bed Diversion, Managing Assaultive Behavior, Restraints - physical/chemical, Internal, HIPAA guidelines (Health Insurance Portability and Accountability Act), Death of a patient - documentation and process, Discharge AMA, Fitness for duty, Risk Management, Sentinel events-monitoring and reporting, Customer Service, Experience managing narcotic diversion, Functions as clinical expert resource, Incident reporting, Infection control, Isolation procedures, Starting and maintaining IVs, Knowledge of regulatory requirements- DPH, TJC, OSHA, etc., Organizational escalation process for facility, Supervising nursing care delivered on all units organizationally, Workplace safety, Centralized staffing, Experience with productivity standards and staffing requirements, Coaching and counseling to performance standards Previous Charge Experience Required EPIC Required Scrubs: Navy blue or white combo

Join PTAG, a leading Project Management Advisory & Services firm recognized across North America is seeking a Field Construction Manager (FCM) to oversee all on-site construction, electromechanical, and civil activities. Reporting to the Project Manager and Construction Manager, you’ll ensure project execution aligns with safety, quality, cost, and schedule requirements in accordance with client and regulatory standards. This role is ideal for an experienced field leader who thrives in dynamic environments and values precision, accountability, and safety. What You’ll Do • Supervise field activities including civil, mechanical, and electrical work., • Monitor construction progress and compare contractor schedules to project baselines., • Lead daily coordination with contractors and conduct weekly progress meetings., • Review invoices, manage material deliveries, and inspect work for compliance., • Maintain up-to-date on-site as-built drawings and documentation., • Coordinate with local/state authorities and manage outage requests via E-STAR/CONVEX., • Resolve construction discrepancies and track change orders, RFIs, and design modifications., • Prepare daily, weekly, and monthly reports including audit logs and meeting minutes., • Enforce OSHA and site safety standards through inspections and briefings., • Oversee environmental compliance, including inspections, reporting, and regulatory coordination., • Support quality assurance by reviewing ITPs, redlines, permits, and testing documentation. What You Bring • Bachelor’s degree in Engineering (ABET-accredited) or equivalent., • Minimum 10 years of experience in:, • Construction management, • Testing and maintenance of electrical equipment, • Relay protection and control systems, • Field commissioning and troubleshooting, • Electrical engineering and SCADA systems, • Knowledge of substation, transmission, and distribution systems., • Experience with outage coordination, tagging procedures, and safety audits., • Familiarity with NEC, NESC, OSHA, FERC, NERC, and CIP standards. Certifications: • Background check clearance per IUSA Contractor policy., • Valid driver’s license., • First Aid / AED certification., • OSHA 30-Hour training. Why Join PTAG At PTAG, you’ll be part of a collaborative team shaping the future of utility infrastructure. We offer: • Competitive pay and comprehensive benefits., • Flexible work environment and opportunities for growth., • Employee Share Purchase Plan (ESPP)., • A culture that prioritizes safety, excellence, and innovation. Apply today to join PTAG’s team and help deliver safe, high-quality projects that power communities forward.

Compensation & Benefits • Pay Range: $80,000 - $110,000, • Medical, dental, and vision programs with 60-80% company contribution., • Long Term and Short-Term Disability., • 401K with Company match., • Annual clothing allowance Summary The Field Construction Manager oversees on-site construction activities to ensure projects are completed safely, on time, within budget, and in accordance with design specifications and quality standards. This role coordinates all aspects of field operations, including subcontractors, materials, equipment, and labor, while serving as the primary point of contact between the construction site and project stakeholders. Responsibilities • Proactively resolve problems & help minimize change orders., • Weekly Report, Monthly Reports, site weekly minutes of meetings., • Attend the contractor’s Safety, Environment and Quality meetings; provide a tip in the onsite meeting and update the onsite binder as needed., • Be organized and document all project progress to provide a good paper trail., • Review contractor invoices and schedules and provide feedback., • Conduct weekly project progress meeting., • Be present at all times onsite when work is being performed., • Immediate notification to project manager of all problems or foreseeable issues throughout construction, or any complaint presented by the general public., • Coordinate material deliveries., • Inspect work in progress to ensure that workmanship conforms to specifications, quality and adherence to construction schedules., • Review and understand the project documentation and any related documentation and provide input to enhance the constructability of the Project, taking into account schedule, cost and quality considerations., • Initiate transmission outage requests for project work., • Coordinate as necessary with all local and state municipalities., • Adhere to company policies, programs and procedures as well as Critical Infrastructure Protection (CIP), Federal Energy Regulatory Commission (FERC), North American Electric Reliability Corporation (NERC). Ensure all requirements are maintained throughout the project execution, • Availability to support emergency storm restoration efforts., • Excellent attention to detail and accuracy., • Effective communication and interpersonal abilities., • Ability to work independently and meet deadlines., • Directly related experience in Construction and Maintenance of Substation Facilities or Transmission / Distribution Systems is necessary:, • 4yr degree in a related field and 5+ yrs of field experience, or, • 2yr degree in a related field and 8+ yrs of field experience, or, • 10+ yrs of related experience in Construction and Maintenance of Electrical Transmission and Distribution Systems, or Substation Facilities, • General knowledge of electric line work and/or substation construction., • General knowledge of electric theory., • Previous experience holding switching and tagging procedures for projects requiring holding markup., • General knowledge of applicable environmental regulations governing construction: storm water pollution prevention, wetlands, stream crossing, and spill response for projects requiring environmental permit or compliance., • Basic knowledge of industry codes governing the electric industry including NEC, NESC, and OSHA., • First Aid/AED training a plus., • OSHA 10 / OSHA 30 training a plus., • Pass pre-employment drug & background screens., • Ability to travel; project locations may vary

We are looking for a Health, Safety and Environment Specialist to support our manufacturing operations in Rochester, NY as part of our WW Health, Safety and Environment Team. Responsibilities may include, but are not limited to: 1. Oversee health and safety programs including process safety management, respiratory protection, hearing conservation, personal protective equipment, hazard communication, laser safety, ionizing radiation, Control of Hazardous Energy (LO/TO), electrical safety, machine/web conveyance safeguarding, fall protection, confined space, & contractor safety reviews., 2. Oversee environmental compliance programs and reporting obligations required the U.S. EPA., 3. Participate in incident and near miss investigations, review and analyze data, identify trends and improvement opportunities to prevent/reduce incidents., 4. Participate in management of change reviews and job hazard analyses to identify/evaluate hazards and recommend controls., 5. Provide HSE training to employees., 6. Conduct audits to ensure compliance with applicable regulations and prevailing professional standards and practices., 7. Provide HSE support for new product development/product change management., 8. Provide technical guidance to management on a large variety of workplace HSE issues. Requirements: • Knowledge of federal, state, local health, safety and environment requirements (OSHA, air, water, waste)., • Knowledge of chemical manufacturing equipment and processes., • Able to build strategic relationships and work effectively in a team., • Self-starter able to work without daily supervision., • Apply a risk-based approach to health, safety, and environmental tasks., • Able to organize and multi-task., • Effective written and oral communication skills; able to express oneself clearly and in technical and non-technical terms., • Strong computer skills with ability to learn new computer systems., • Able to lift 50 lbs on occasion., • Able to work on feet for prolong periods of time., • Able to use ladders and work from elevated locations., • Able to work onsite, there will be occasions where work from home is acceptable., • Willingness to learn and develop skillset into a specialized role. Education and Experience: • Minimum Bachelor’s degree in Occupational Safety and Health, Chemical Engineering, Chemistry, or related field., • 5+ years of relevant experience in a chemical manufacturing environment.

Position Overview SRG is seeking a Board Certified or Board Eligible Gastroenterologist to provide on site outpatient care at the Rochester VA Community Based Outpatient Clinic (CBOC), part of the Finger Lakes Health Care System (VISN 2). The Gastroenterologist will provide consultative and ongoing care to Veteran patients in an outpatient setting, working as part of an interdisciplinary VA care team and using VA electronic health record systems. This role is clinic based only, with a stable weekday schedule and no on call requirement. Rochester Community Based Outpatient Clinic (CBOC) 260 Calkins Rd, Rochester, NY 14623 Position Responsibilities: • Provide outpatient gastroenterology consultative services and follow up care for adult Veteran patients., • Evaluate, diagnose, and manage a broad range of gastrointestinal conditions consistent with accepted standards of care and granted privileges., • Review and interpret appropriate diagnostic studies, coordinate additional testing as needed, and collaborate with referring providers., • Document all patient encounters, orders, and communications in the VA electronic health record in accordance with VA policies and timeliness standards., • Participate in multidisciplinary coordination with primary care, specialty services, nursing, and ancillary staff to optimize patient outcomes and access to care., • Maintain compliance with all VA clinical, credentialing, privacy, and safety policies, including required trainings and quality initiatives., • Participate in peer review, performance improvement, and other quality or utilization management activities as requested by VA leadership., • Specific procedural scope will be aligned with clinic capabilities and granted privileges during the credentialing process. Required Qualifications: • Doctor of Medicine (MD) or Doctor of Osteopathic Medicine (DO)., • Completed ACGME accredited residency in Internal Medicine and fellowship in Gastroenterology., • Unrestricted, active license to practice medicine in any U.S. State, Territory, or Commonwealth., • Board Certified or Board Eligible in Internal Medicine and Gastroenterology (ABIM)., • Current Basic Life Support (BLS) and Advanced Cardiac Life Support (ACLS) certifications., • Eligible for VA credentialing and privileging through VetPro and Medical Executive Board., • Ability to meet VA Employee Health requirements, including documentation of immunizations and screenings such as TB, MMR, Varicella, Hep B, Tdap, Influenza, and OSHA bloodborne pathogen training., • Ability to obtain and maintain a favorable background investigation in accordance with VA and federal requirements., • Proof of current professional liability insurance with acceptable coverage limits at time of hire. Preferred Qualifications: • Prior clinical experience within the Department of Veterans Affairs or other federal health system., • Experience working in a multidisciplinary outpatient setting., • Familiarity with VA electronic health records and VA clinical workflows.

Join PTAG, a leading Project Management Advisory & Services firm recognized across North America for delivering major capital projects in the power industry. We are seeking a Field Construction Coordinator (FCC) to support our client’s transmission, distribution, and substation projects in Binghamton, New York. You’ll play a critical role supporting field operations — coordinating schedules, ensuring safety and quality, and driving project execution to meet client and regulatory standards. What You’ll Do • Monitor field construction progress and coordinate schedules with project leadership., • Lead weekly project meetings and verify contractor two-week lookahead schedules., • Review contractor invoices, material deliveries, and field documentation for accuracy., • Observe on-site activities and report field issues or public concerns to the Project Manager., • Support resolution of construction discrepancies with engineering and contractor teams., • Ensure compliance with Maintenance and Protection of Traffic (M&PT) standards., • Conduct safety briefings, site observations, and weekly inspections., • Support project closeout, including documentation finalization and material reconciliation. What You Bring • Minimum 5 years of experience in utility field operations or construction management., • Strong knowledge of transmission, distribution, substation, and underground network construction practices., • Proficiency with MS Office (Excel, Word, Project); SAP experience preferred., • Strong written and verbal communication skills across multidisciplinary teams., • Ability to travel within the service area and work in varied field environments., • Certifications: OSHA 30-hour, First Aid/AED, Valid Driver’s License, and Background Check Clearance (IUSA policy). Why Join PTAG At PTAG, you’ll be part of a collaborative team shaping the future of power and infrastructure across North America. We offer: • Competitive pay and comprehensive benefits., • Flexible work environment with opportunities for growth., • Exposure to major capital projects in the energy and utilities sector. Apply today to join PTAG’s team in Binghamton, NY and help deliver safe, high-quality projects that power communities forward.

Senior Director, Facilities Rochester, NY JK Executive Strategies is proud to partner with a mission-driven human services organization in search of a Senior Director of Facilities to join its team! This is an opportunity to lead all aspects of facilities strategy, compliance, and capital planning for a respected agency supporting individuals with developmental disabilities. This nonprofit organization operates across multiple program and administrative sites throughout the region. With a strong commitment to health, safety, and regulatory excellence, the agency plays a vital role in the community. The Senior Director of Facilities will help ensure a safe and effective physical environment that supports the organization's critical work. Responsibilities Key Responsibilities • Oversee the maintenance, repair, and renovation of all agency-owned and -leased properties, including IRAs, day habilitation sites, and administrative offices., • Ensure compliance with health, safety, fire, OSHA, and OPWDD, OFPC regulatory standards., • Maintain preventive maintenance schedules for building systems (HVAC, plumbing, electrical, etc.)., • Develop and implement emergency preparedness and disaster recovery plans., • Serve as agency liaison with municipalities, fire departments, code enforcement, and vendors. Capital Planning & Project Management • Lead long- and short-term planning for agency space needs; assess feasibility of leasing vs. owning facilities., • Manage capital improvement projects, including contractor selection, budgeting, scheduling, and quality control., • Oversee administration of Preservation funds and develop 1–3-year capital plans., • Prepare proposals, review contract documents, and ensure vendor compliance with agency and regulatory requirements., • Direct bidding, evaluation, negotiation, and renewal of facilities contracts and services. Leadership & Supervision • Supervise and develop facilities staff, including hiring, training, and performance management., • Hold supervisors accountable for effective management, staff development, and team results., • Delegate responsibilities appropriately, ensuring compliance with regulations and agency policies., • Provide coaching, feedback, and mentoring to drive high performance in a diverse workforce. Financial & Supervision • Develop and manage operating and capital budgets; monitor and analyze fiscal reports., • Track, analyze, and present financial and operational data to senior leadership., • Identify opportunities to improve efficiency, cost-effectiveness, and service delivery., • Ensure timely communication with program leaders to align facilities planning with program needs. Requirements • Bachelor’s degree in Facilities Management, Engineering, Construction Management, or related field preferred., • Minimum of 5–7 years of progressive facilities/property management experience, including supervisory responsibility., • Experience in nonprofit or human services environment preferred; knowledge of OPWDD regulations highly desirable., • Proven experience managing capital projects, vendors, and contractors., • Strong knowledge of building systems, construction practices, safety codes, and regulatory compliance., • Excellent leadership, organizational, negotiation, and communication skills., • Proficiency with Microsoft Outlook and Word (email, scheduling, document creation, and file organization), • Ability to read blueprints, schematics, and construction specifications., • Strong analytical skills to prepare, interpret, and present financial and operational data., • Valid NYS Driver’s License required Salary Range • $85k-$100k + Company Vehicle JK Executive Strategies is an Equal Opportunity Employer. It is the policy of JK Executive Strategies to provide equal opportunity in employment and conditions of employment to all individuals regardless of age, race, color, religious beliefs, national origin, sexual orientation, gender identity, sex, veteran or military status, disability, pregnancy-related condition, predisposing genetic characteristics, genetic information, marital status, familial status, prior arrest, domestic violence victim status, non-job related convictions, participation in lawful activities outside of our workplace, or any other status protected by law.

PROJECT MANAGER SUMMARY: The Project Manager is responsible for providing overall managerial direction for all solar projects. Accountable for managing client expectations, documentation compliance, schedule, budget, cash projections, and quality performance to ensure work is completed on time, within budget, and that compliance of our company safety standards are met. POSITION Project Manager DEPARTMENT: EPC REPORTS TO: Senior Project & Engineering Manager TERMS/HOURS: Full-time, M-F, 8:00AM-4:30PM CLASSIFICATION: Salary/Exempt; Travel may be required WORK AUTHORIZATION: US Person (US Citizen or Permanent Resident) COMPETENCIES: • Personal Accountability, • Self-Management, • Planning & Organizing, • Problem Solving Ability, • Conflict Management, • Goal Achievement, • Persuasion KEY RESPONSIBILITIES: • Develop and maintain full control over budget and schedule from development through PTO., • PM is accountable for all the projects financial documentation which includes project budget forecasting, AIA billing to owner, material invoice approval, subcontractor AIA billing, and change management with required backup documentation., • PM is the direct point of contact and responsible for all client interface & relations., • Hold weekly owner meetings and provide updates on schedule impacts, change orders, budget, safety, & quality control., • Review local and federal laws to ensure regulatory compliance., • Identify necessary permits and licenses from authorities to ensure the project meets regulations and ensure all such actions are in compliance., • Prepare bid packages and procure materials and services as needed to complete the project on time. Negotiate and document all contracts and professional services agreements. Create project budget based upon quotes and bids; track project costs., • Drive and tightly manage all Project Schedules and keep the Director of Construction informed if we are hitting our goals, or if we need to adjust to stay on track., • Hold full accountability for accurate record keeping and electronic file storage of design team correspondence, submittals, RFI’s, drawings, change orders, project billing., • The Project Manager may at times manage more than one project at the same time., • Utilize effective and efficient processes, procedures and workflows on each solar project which meet or beat schedules and budgets while minimizing financial risk., • Maintain accurate tracking on a weekly basis for all projects so that solar deliverables are accounted for and achieved successfully., • Manages and coordinates with Superintendent, all on-site subcontractor activities for compliance with the schedule and monitors and enforces compliance with subcontract requirements., • Supervises and mentors all superintendents; monitors their activities and provides leadership., • Monitors and reports on solar construction productivity, budget, and schedule performance (including trends) to the Director of Construction., • Takes actions necessary to meet project budget and schedule requirements., • Creates and approves the development and implementation of subcontractor schedule recovery plans as required., • Coordinates the Construction Completion Walkdowns and the complete hand over of start-up packages to the Startup Manager and supervises the close out of all punch list items., • Responsible for the procurement of all major materials for each project to ensure conformity with the contract documents., • Conducts weekly coordination meetings with subcontractors., • Ensures all subcontractors on the project site adheres to OSHA Safety Standards, Quality, Ethical Standards, and Lessons Learned policies., • Accountable for oversight of completion of project load banking, Permission to Operate, and the construction punch list., • Has full knowledge of the safety program and acts as the Safety Representative on site in the absence of the regular Project Superintendent., • Has general knowledge of all disciplines of construction and is able to stand in for the Project Superintendent in his absence., • Oversees the safety and QA/QC issues with the safety and quality representatives., • Understands the major commercial and deliverable terms of the construction subcontracts and manages within these terms., • Collaboration with the design Engineers and holding them accountable on engineering deliverables., • Responsible for oversite & management of 3rd party special inspections or product Manufacturer's Technicians for any inspections or commissioning., • Continually identify opportunities to improve products/services, customer service, gain overall efficiencies and/or reduce costs., • Proactively support team members and company activities to ensure business success. This includes utilizing translatable skills across the company to maximize efficiency and leverage expertise., • Maintain positive working relationships with staff, vendors, customers, and all stakeholders including demonstrating respect and appreciation for others., • Learn new skills and stay current on industry news, practice trends, grants or regulations, applicable laws, and matters of compliance and utilize skills and knowledge to benefit the company. KNOWLEDGE/SKILLS/EDUCATION: • Bachelor’s degree in related field, which may include Construction Management, Business, or Engineering, required., • PMP, PgMP, CAPM, and/or comparable project management certifications highly desirable., • Excellent verbal and written communication skills., • Excellent interpersonal and customer service skills., • Excellent organizational skills and attention to detail., • Excellent time management skills with a proven ability to meet deadlines., • Strong analytical and problem-solving skills., • Strong leadership skills., • Ability to prioritize tasks and to delegate (not abdicate) them when appropriate., • Thorough understanding of or the ability to quickly learn about the project or product being developed., • Proficient with Microsoft Office Project or related software. MINIMUM EXPERIENCE: • At least five years of related experience required. WORKING CONDITIONS: • Typical construction site environment., • Requires working in very hot (above 80 F degrees) or very cold (below 32F degrees) temperatures and exposure to inclement weather such as dust, wind, snow, rain, etc., • Includes exposure to sounds and noise levels that are distracting or uncomfortable., • Work around hazardous equipment., • Regularly required to stand, walk, and sit for extended periods during the day., • Regularly use hands to reach; ability to talk and hear., • Regularly lift and/or move up to 25 pounds and frequently lift and/or move up to 50 pounds.

Job Title: Solar Project Manager Location: Rochester Employment Type: Full-Time Project Size Focus: 5 MW – 100 MW Sector: Community & Commercial Solar Position Summary The Solar Project Manager is responsible for leading the full lifecycle of community and commercial-scale solar projects ranging from 5 MW to 100 MW. This role oversees project planning, engineering coordination, permitting, procurement, construction execution, and commissioning. The ideal candidate brings strong technical expertise, excellent stakeholder management skills, and a proven track record of delivering solar projects safely, on time, and within budget. Key Responsibilities Project Leadership & Planning • Lead end-to-end project delivery from development handoff through construction and final commissioning., • Create detailed project schedules, budgets, and execution plans., • Coordinate engineering teams, external consultants, and EPC partners to ensure design alignment with project objectives., • Oversee permitting processes, regulatory approvals, and interconnection requirements. Construction Management • Manage construction activities across multiple sites, ensuring adherence to safety standards, quality expectations, and project specifications., • Conduct regular site visits to monitor progress, identify risks, and implement corrective actions., • Oversee contractor performance, resolve field-level issues, and ensure alignment with contractual obligations., • Support procurement of major equipment such as modules, inverters, racking, and balance-of-system components. Stakeholder Coordination • Serve as the primary point of contact for internal teams, landowners, utilities, contractors, and local authorities., • Facilitate cross-functional communication between development, engineering, procurement, finance, and operations teams., • Ensure clear and consistent reporting of project status to leadership and key stakeholders. Financial & Risk Management • Maintain and track project budgets, forecasts, cash flow needs, and cost controls., • Identify project risks and develop mitigation strategies., • Support contract negotiation for EPC, subcontractors, equipment vendors, and service providers. Quality, Safety & Compliance • Ensure project adherence to environmental, construction, and electrical standards (NEC, NFPA, UL, and local codes)., • Promote a strong safety culture across project sites in alignment with corporate and regulatory requirements., • Verify quality through oversight of testing, commissioning, punch list closure, and handover to operations teams. Project Closeout • Lead final inspections, performance testing, documentation collection, and turnover to asset management or O&M teams., • Conduct post-project reviews to support continuous improvement. Qualifications • Bachelor’s degree in Engineering, Construction Management, Renewable Energy, or related field preferred., • 5–10 years of experience managing solar projects, ideally community solar or commercial-scale installations (5 MW–100 MW)., • Strong understanding of solar engineering, construction processes, and electrical systems., • Experience working with utilities on interconnection, permitting agencies, and EPC contractors., • Proficiency in project management software (Primavera, MS Project, or similar) and Microsoft Office Suite., • Excellent leadership, communication, and stakeholder management skills., • Proven track record of delivering complex projects on schedule and within budget., • OSHA 30 certification preferred; commitment to safety excellence required., • Ability to travel regularly to project sites. Working Conditions • Combination of office and field-based work., • Frequent travel to project locations and construction sites., • Exposure to outdoor environments and active construction activities., • Occasional extended hours during critical project milestones. If this role is of interest please reach out to Simon Howard ()

A well-respected community hospital in Rochester, NY is looking for a dedicated Laboratory Manager to lead their clinical laboratory team. This leadership role offers the chance to oversee daily operations, ensure quality standards, and drive excellence in patient diagnostics within a close-knit hospital environment. Location: On-site in Rochester, NY Schedule: Full-Time | Day Shift What You’ll Do: * Manage all facets of laboratory operations including staffing, budgeting, and compliance * Lead and mentor a multidisciplinary lab team, fostering a culture of accuracy, efficiency, and continuous improvement * Ensure lab compliance with regulatory agencies including CAP, CLIA, and OSHA * Oversee quality control and quality assurance programs to maintain the highest testing standards * Collaborate with hospital leadership, physicians, and clinical staff to support patient care goals Why This Role Stands Out: * Take charge of a vital community hospital lab with a supportive, collaborative team * Opportunity to impact patient care directly through leadership and operational excellence * Work in a vibrant city with access to cultural, educational, and recreational amenities * Access to professional development and career growth within the hospital system * Enjoy balanced city living with proximity to beautiful parks and the Great Lakes region

Position: Technical Training Manager Location: Rochester NY or Painted Post NY Employment Type: FT Compensation: $80,000-$105,000/year Travel: 10-20% travel; travel to customer sites and field service groups as needed for training purposes Manages Others: No Education: HSD/GED is required 2 or 4 year technical degree is preferred Experience: Minimum of 5 years’ experience in a field service or installation environment with an emphasis on training others, applicable topic areas include: associated with material handling, including conveyors, lift tables, stretch wrappers, palletizers, cranes, robotics, and/or other automation systems involving integration of some or all the above. Previous experience as a trainer in a similar technical environment required. About This Opportunity: Reporting to the Director of Field Operations, this high profile position is responsible for delivering the company’s technical training; developing the technical skills of employees performing field service, field installation, and production operations; and aligning training and employee development with the needs of the company. This position will work closely with executives, managers, and supervisors to ensure technical training is delivered effectively. This position will collaborate with engineering and operations department staff to identify training needs, identify materials that can be used to train both field and in-house production operation employees, and standardize training materials across the company. This position will also work with the environmental health & safety (EHS) department manager to integrate safety and compliance training requirements into technical training and assist with developing methods of delivery. If you thrive in a collaborative environment and want a hands-on role with the opportunity to become master certified (if you aren't already), this is your chance to move into a role that is primarily office-based with manageable travel. What You’ll Do: • Provide technical expertise to train an array of field service, field installation, and production operations technicians that support our products and customers. Example of training focus may include, but not be limited to:, • Mechanical applications, • FANUC, • Hanel, Hytrol, Wolf Tec and other commonly used applications, • Advanced Electrical 1 & 2 Course, • Robotic handling tool course, • Safety trainings (application of lockout/tagout, use of fall protection, hot work permitting, use of atmosphere monitoring equipment, and general PPE), • Develop in-person and online training courses that provide technical training to meet business needs and employee development.Trainees will include both newly hired and existing employees., • Track and maintain training records for technical staff to support business needs., • Identify, select, standardize, and manage the resources required to support the delivery of technical training., • Oversee all company in-house training locations and resources with support from local site representatives., • Continuously review and update the content of technical training to ensure training is current with the company’s evolving processes and procedures. This may include communication and dissemination of the company’s technical bulletin updates., • When required, travel to company or customer locations to support training. This may include developing processes and identifying the resources necessary to support remote training strategies., • When required, travel to company or customer locations to assess and inspect field operations and compliance with safe work practices., • Support employee onboarding by participating in field service new hire orientation and initial training on an as needed basis., • Establish clearly defined requirements of technical skills that can be used by management when considering technical staff for professional advancement. What You Bring: • Minimum of 5 years’ experience in a field service or installation environment with an emphasis on training others, applicable topic areas include: material handling, including conveyors, lift tables, stretch wrappers, palletizers, cranes, robotics, and/or other automation systems involving integration of some or all the above., • Previous experience as a trainer in a similar technical environment required., • FANUC Master Certification is preferred but not required, • Knowledgeable in phase 3 motors, 280/480V systems is required, • Strong technical knowledge and experience associated with material handling systems with a preference for experience that includes complex automation and robotics equipment service., • Ability to effectively communicate and interact with people both in-person and online to deliver messages and content., • Working knowledge of general processes and requirements of field technicians working in industrial environments., • Ability to read engineering plans, specifications, and schematics., • Awareness of OSHA, NFPA, NEC, and other EHS rules and regulations relevant to field service operations., • Proficient in the use of computer software programs, including Microsoft Word, Microsoft Excel, Microsoft PowerPoint, Microsoft Outlook, and Microsoft Teams applications., • Strong interpersonal skills are required including being comfortable working with employees and customers at all levels of an organization., • Extensive organization and management skills, including the ability to manage multiple priorities and meet deadlines., • Microsoft Word, Outlook, PowerPoint, Excel, In compliance with pay transparency requirements, the wage range for this role is $80,000.00 – $105,000.00/yr. The rate range provided is a general guideline. When extending an offer, Adaptec Solutions considers factors including but not limited to experience and geographic location. Adaptec Solutions also offers a variety of benefits including generous paid time off (PTO), 11 paid company holidays including your birthday, generous health plans, dental and vision insurance, HSA/FSA accounts, generous 401(k) match and immediate vesting, short-term/long term disability coverage and basic life/AD&D insurance and education assistance. Adaptec Solutions, LLC is an equal opportunity organization. We recruit, employ, train, compensate, and promote without regard to race, religion, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, protected veteran status, or any other basis protected by applicable federal, state or local law.

Job Description Insero Talent Solutions has partnered with a fast growing security company to recruit a Service and Installation Technician in Rochester, NY. This position is responsible to support sales and operations through the installation and service of fire alarm and/or security systems. The Service & Installation Technician position installs, maintains, or repairs fire alarm and/or security systems including card access and video surveillance. Ensure that work is in accordance with relevant codes and meets the expected needs of the customer. We expect a high degree of communication among our internal team and our customers requiring attention to detail in all aspects of planning and execution of our projects. • Install, maintain, repair, or replace security systems, alarm devices, or related equipment following blueprints of electrical layouts and building plans either remotely or on-site., • Mount and fasten control panels, card readers, door and window contacts, sensors, or video cameras and attached electrical, and network wiring to connect components., • Collaborate with appropriate staff from execution of customer proposals through installation and on-going maintenance, that generates customer satisfaction., • Troubleshoot systems/processes to determine causes or system failures and to recommend/implement solutions., • Inspect installation sites and study work orders, building plans and installation manuals to determine material requirements and installation procedures., • Ensure that work is in accordance with relevant codes and standard practices., • Associate Degree in electronics or related degree OR Technical Certifications, or other education supporting this role., • 2-5 years of experience as a technician in the fire alarm/security industry., • Excellent organizational, decision-making, and communication skills., • Strong working knowledge of fire alarm and/or security industry., • NICET certification highly preferred (fire division), • OSHA 10 certification

Job Description Lifetime Assistance – Community Transition Coach Make an Impact. Create Joy. Shape the Future. At Lifetime Assistance, our mission is to foster independence, dignity, and respect for individuals with intellectual and developmental disabilities. Working with us goes beyond just a job—it’s a chance to transform lives, including your own. Position Overview: Job Title: Employment Transition Coach Location: Chili, NY Department: Community Pre-Vocational Services Reports To: Associate Director of Vocational Services Employment Type: Full-Time - 40 Hours, 8am - 4:30pm with some evening flexibility for meetings & events Starting Wage: $18 - $19 per hour Why You Should Work for Lifetime Assistance? * No-Premium Health Insurance: Access comprehensive healthcare without added cost. * Education Support: Tuition assistance, scholarships — 50% off tuition for two courses per semester plus up to $3,000 scholarship per semester — plus micro-credential stipends up to $750 and SUNY partnerships. * Paid Training & Coaching: Receive hands-on onboarding with a Success Coach, immersive learning, e-learning, and ongoing paid training. * Career Growth: Clear pathways to advancement, leadership training, and coaching support. * Work-Life Harmony: Generous paid time off and supportive scheduling. * Join a Caring Culture: Be part of a compassionate, mission-driven team that values every person — both those we support and our employees alike. Your Core Responsibilities: • Provide daily coaching and training in a group setting to build job readiness and soft skills through hand-assembly and contract work. • Facilitate breakout groups focused on workplace behaviors, communication, time management, and independence., • Develop and maintain Staff Action Plans; participate in life plan meetings and act as an active member of each person’s team., • Continuously assess strengths, interests, and skill-building opportunities; support individualized transitions to community employment., • Collect and document attendance, productivity, job performance, and progress toward goals; meet all deadlines., • Prepare productivity evaluations and assist with time studies in accordance with Department of Labor regulations., • Ensure all OPWDD, DOL, ACCESS-VR, OSHA, and Medicaid documentation is current and compliant (service plans, worker contracts, DDPs, I-9s, etc.)., • Provide feedback to ensure tasks/contract work are appropriate and achievable for the people supported., • Collaborate with business staff on payroll, quality assurance, and packaging; engage people supported in these processes to promote skills and independence., • Maintain a safe, clean, and orderly work environment; support physical plant safety., • Serve as a positive role model; promote professional, inclusive, and person-centered practices., • Participate in Vocational Services staff meetings and departmental engagement activities.What You Bring: * Education & Experience: * Associate degree + 1 year relevant experience; OR * High school diploma/equivalent + 3 years of pre-vocational or human services experience. * Skills & Qualities: Strong communication, problem-solving, and organizational skills; adaptability and critical thinking. * Requirements: Must meet agency driver and background check requirements; ability to complete all agency trainings. * Physical Demands: Ability to stand, walk, and lift up to 40 lbs while supporting individuals in varied work environments. Our Mission & Culture: * Mission-Driven Work: Empowering individuals to live with independence and purpose—here, your work truly matters. * Inclusive & Supportive: A workplace built on respect, dignity, and a shared vision of inclusion. * Community Impact: Join efforts that reflect Lifetime Assistance’s dedication to community partnerships and enhanced quality of life for all. Are You Ready to Begin? If you’re passionate about empowering others to succeed in community employment and volunteer settings, apply today and join us in building lives of independence—one person at a time. Equal Opportunity Employer Lifetime Assistance is proud to be an Equal Employment Opportunity employer. We celebrate diversity and are committed to inclusive hiring practices without regard to race, religion, gender, age, disability, or other protected characteristics. “I am part of something bigger… Being a Lifetime Assistance employee means everything to me.” — Kimberly C, Family Coordinator of Community Services, celebrating her 30th year with us

Job Description Processed Pipe Welder – Rochester, NY We are seeking a skilled Processed Pipe Welder to join our team in Rochester, NY. The ideal candidate will have experience in welding and fabricating high-pressure and process piping systems for commercial and industrial projects. This position requires strong technical welding skills, the ability to read detailed blueprints and isometric drawings, and a commitment to precision, safety, and quality workmanship. Key Responsibilities: • Pipe Welding & Fabrication: Weld and fabricate processed piping systems using TIG, MIG, and Stick welding techniques, including stainless steel, carbon steel, and other alloys., • System Installation: Install prefabricated and field-routed process piping according to project specifications and industry standards., • Blueprint Interpretation: Read and interpret piping isometrics, blueprints, P&IDs, and technical drawings to ensure accurate layout and welding., • Fit-Up & Assembly: Perform pipe fit-up, tack welding, grinding, and preparation for final welding; ensure all welds meet project and code standards., • Quality Control: Conduct visual inspections and assist with pressure testing, x-ray, or other NDT as required., • Minimum 3 years of experience as a pipe welder in commercial or industrial settings., • Proficient in TIG and Stick welding on process piping (stainless steel, carbon steel, etc.)., • Ability to read and interpret complex blueprints and isometric drawings., • Experience with orbital welding or sanitary welding (preferred but not required)., • Skilled in pipe preparation, layout, and quality weld execution., • Strong attention to detail and commitment to job site safety.

Job Summary The Clinical Laboratory Technician is responsible for performing routine laboratory tests, preparing specimens, operating diagnostic equipment, and supporting accurate and timely reporting of laboratory results. The role ensures high-quality testing in accordance with laboratory policies, safety standards, and regulatory guidelines. Key Responsibilities • Collects, labels, and processes patient specimens including blood, urine, and other body fluids., • Performs routine laboratory tests such as hematology, chemistry, urinalysis, microbiology, and immunology procedures., • Operates, calibrates, and maintains laboratory instruments and analyzers according to established protocols., • Records, verifies, and reports test results with accuracy and attention to detail., • Follows quality control procedures and participates in proficiency testing., • Identifies equipment malfunctions or irregular test results and reports timely to supervisor., • Prepares reagents, solutions, and laboratory supplies as required., • Adheres to infection control, biosafety, and OSHA guidelines at all times., • Maintains accurate documentation, logs, and patient records in the laboratory information system (LIS)., • Supports troubleshooting of tests and assists in improving laboratory workflows., • Ensures a clean, organized, and compliant laboratory work area., • Collaborates with medical technologists, pathologists, and clinical staff to support efficient lab operations., • Knowledge of laboratory techniques, instruments, and diagnostic testing procedures., • Strong attention to detail and ability to follow precise instructions., • Effective communication and teamwork skills., • Ability to identify errors, troubleshoot, and escalate issues appropriately., • Competency with electronic medical records (EMR) and laboratory information systems (LIS)., • Associate degree in Clinical Laboratory Science, Medical Laboratory Technician program, or related field (required)., • State licensure/certification as required (e.g., MLT)., • Previous clinical laboratory or healthcare experience preferred. Pride Health offers eligible employee’s comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance and hospital indemnity), 401(k)-retirement savings, life & disability insurance, an employee assistance program, legal support, auto, home insurance, pet insurance, and employee discounts with preferred vendors.

Job Description$1,000 SIGNING BONUS; paid in $500 increments every 90 days! Why Palmer Food Services? We offer competitive wages and a generous benefit package that contributes a significant amount to your total compensation and your personal well-being. Additionally, there are opportunities to distinguish yourself and move up in our established company through excellent performance and by contributing to our company mission, vision, and values. We value each member of our diverse and talented team - because at Palmer Food Services, our associates are our unfair advantage. What We Value: • Honesty & Integrity, • Service & Excellence, • Collaboration & Teamwork, • Family & Community, • Dependability & Loyalty, • Accurate Product Delivery: • Ensure timely and precise delivery of products to local customers, including bars, restaurants, casinos, and schools., • Verify delivery contents against invoices to guarantee correct delivery of orders. • Merchandise Handling: • Properly scan merchandise upon delivery to maintain accurate records., • Utilize handcarts, ramps, lift gates, and other equipment safely and efficiently. • Vehicle Operation and Maintenance: • Conduct pre-trip inspections to ensure the commercial vehicle is in good operating condition., • Operate the commercial vehicle safely in compliance with all traffic regulations. • Communication: • Maintain clear communication with the transportation department associates using cell phones., • Ensure timely reporting of any issues or delays encountered during deliveries. • Regulatory Compliance: • Adhere to all Department of Transportation (DOT) and Occupational Safety and Health Administration (OSHA) guidelines., • Follow invoicing guidelines and return product protocols as outlined by company policy. • Record Keeping: • Accurately record mileage and delivery times for each route., • Complete necessary documentation at the beginning and end of each daily route. • Customer Service: • Provide excellent customer service by addressing any customer concerns or questions during deliveries., • Handle products with care to ensure they reach the customer in excellent condition. • Equipment Usage: • Operate and maintain delivery equipment, including handcarts, ramps, and lift gates, ensuring they are in good working condition. • Daily Route Management: • Plan and manage daily delivery routes to optimize efficiency and timeliness., • Learn, understand, and follow company-specific routing and delivery procedures. • Additional Duties: • Perform any additional duties as assigned by supervisors to support the overall delivery process and company objectives. Minimum Qualifications: • High School diploma or GED., • Clean CDL Class A license., • Must have the ability to lift product weighing up to 100 lbs on a consistent basis., • Required to climb in and out of a commercial vehicle and operate in a safe manner. The physical demands described below are representative of those that must be met by a Delivery Driver to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Must be able to stand, walk, stoop, bend, kneel, sit, operate warehouse, • Must be able to use hands to handle and feel objects, perform fine finger movements, reach with hands and arms, and have the ability to see, talk, and hear., • Possess normal vision with or without correction and able to distinguish colors, • Medical, Dental and Vision Insurance, • Paid Benefit Time (PTO, Holiday and Sick), • 401k Retirement Plan with Employer Matching, • Eligibility for Annual Profit-Sharing Bonus, • 15% Employee Discount on Retail Grocery Items (Includes Fresh Meat & Seafood), • Associate Discounts on Warehouse Food Products, • Employee Appreciation Events, • And much more #HP

Job Description Atlantic Plywood is looking for a full-time Truck Driver to join our team! We are looking for skilled Class B CDL Drivers to help meet the needs of customers by delivering and picking up products in a timely, safe, and courteous manner. We seek highly motivated and experienced drivers with a background in delivering construction and or industrial products and providing customer satisfaction. Responsibilities include, but are not limited to: • Maintain driver logs and complete pre-trip inspections, • Follow all corporate operational procedures and QC Standards, • Adhere to all safety requirements, including Federal Motor Carrier Safety Regulations, • Maintain the service and appearance of all company vehicles, • Follow delivery/pickup instructions from Warehouse Manager and/or Sales Manager, • Authorization to work in the US, • High school diploma / GED, • Valid Commercial Class B Driver’s License and clean driving record, • Current Medical Card, • Good understanding of safety procedures and use of personal protection equipment (PPE), • Good organizational and time management skills, • Must be able to work unsupervised as well as in a team, • Must be able to start early, work late occasionally as needed, • Knowledge of GVWR’s, state/federal regulations regarding height/weight maximums, & winch operations, • OSHA familiarity/training, • Acceptable DOT Drug Test History, • Previous CDL Driving experience, • Previous warehouse experience, • Flatbed and/or tractor-trailer experience, • Frequent holding and grasping with the hands when loading and unloading equipment and while securing your load, • Frequent use of foot/feet, • Frequent lifting of 50 lbs.; occasional lifting up to 90 lbs., • Frequent pushing and pulling of truck side-curtain walls, • Frequent use of winch & ratchet strap tie-downs for load securement, • Morning Shift, • Local Routes w/ Occasional Overnight Deliveries, • Weekends off, • 10+ Paid Holidays, • Accruable PTO, • 401(k) Program, • Company Paid Life Insurance, • Short- and Long-Term Disability Insurance, • Health, Dental, Vision, and Flexible Spending Insurance Plans, • A positive work environment with all team players, • Bonus incentives for employee referrals Since our inception in 1974, Atlantic Plywood Corporation has prided itself on delivering the highest quality and best value to our customers. This philosophy has helped us grow into a regional industry leader, distributing a wide range of quality hardwood plywood and panel products and solutions throughout the Eastern United States. As our many satisfied customers have come to know, Atlantic Plywood offers not only products and services you can depend on but also a convenient, cost-effective partnership that helps our customers’ business grow.

Job Description We are seeking a dynamic and knowledgeable Safety Director to lead our safety initiatives and ensure compliance with all safety regulations. The ideal candidate will be responsible for coordinating, administering, and enforcing intensive training programs. As well as, accountable for the performance and results of the quality function and reports on key quality indicators and metrics. The Safety Director will work cross functionally and interact with many key stakeholders. Responsibilities • Ensure the integral entire workplace for our team members are in compliance with industry, state, federal and other company related safety guidelines or regulations., • Establish, implement and document quality standards, procedures, and guidelines that comply with regulations, best practices , and stakeholders expectations., • Lead in continuous improvement and innovation of all safety practices., • Lead the safety initiatives, program development, organize ensuring compliance with OSHA regulations, industry standards, company policies for the organization and all stakeholders., • Conduct risk assessments and enforce preventative measures and collaborate with all stakeholders to resolve the safety violations., • Inspect equipment, machinery and job sites to inaugurate corrective action plans., • Manage safety documentation and ensure all compliance paperwork is up-to-date., • Foster a culture of collaboration and teamwork with all stakeholders within the organization., • Delegate responsibilities to team members and enforce all policies, procedures, standards, specifications, guidelines, training programs, and cultural values., • Provide leadership for the team by building and motivating team members to meet key performance indicators (KPI)., • Maintain a safe and healthy work environment by establishing, following, and enforcing standards and procedures; complying with legal regulations., • Develop and maintain relationships with stakeholders, communicate safety updates, and manage expectations to ensure stakeholder satisfaction, • Bachelor’s degree in Safety Management, or applicable field or 10 or more years of relevant experience., • Roofing and/or construction management experience., • In-depth knowledge of OSHA guidelines and construction safety practices., • OSHA certification., • Proven experience in supervising field operations, • Proficiency in Google, MS Office (Outlook, Word, Excel) and project management software, • The ability to work in different environmental conditions., • Strong analytical, organizational, leadership and communications skills, • Ability to coach and instruct all team members on safety regulations. High problem solving aptitude, • Highly trained in conflict management and business negotiation processes

Job Description Responsibilities Artificial Intelligence; Advanced Technology; The very best in patient care. With decades of expertise, we are Radiology Forward. With dynamic cross-training and advancement opportunities in a team-focused environment, the core of our success is its people with the commitment to a better healthcare experience. When you join us as a Lead MRI Technologist, you will be joining a dedicated team of professionals who deliver quality, value, and access in the 21st century and align all stakeholders- patients, providers, payors, and regulators to achieve the best clinical outcomes. You Will: • Provide the Imaging Center Manager (ICM) with feedback regarding performance and quality of technologists., • Manage and provide coaching, training, support, and motivation to team members., • Monitor and document performance during performance periods and provides documentation to the ICM., • Promote flexibility in staff utilization and delegate work appropriately across teams and departments., • Adheres to all OSHA regulations, RadNet practices, and generally accepted safety protocols., • Performs technologist duties to maintain technical skills and to alleviate staffing shortages., • Supports the ICM in facility initiatives., • Provide input for hiring and performance evaluation of MRI employees, • Genuinely passionate about patient care and leadership, exercise sound judgement and have the ability to remain professional in all situations, • Capable of showcasing adept and professional communication skills with leaders across all levels, as well as demonstrating strong interpersonal abilities and respect when interacting with patients, leaders, and colleagues, • ARRT(R) (MR) or ARMRIT certification, • State License in Diagnostic Radiologic Technology, • Must have BLS certification, • A familiarity with and ability to use equipment in including RIS, imaging equipment and PACS., • Comprehensive Medical, Dental and Vision coverages., • Health Savings Accounts with employer funding., • Wellness dollars, • 401(k) Employer Match, • Free services at any of our imaging centers for you and your immediate family.

Job Description True North Hotel Group, an award-winning management and development company, is seeking a Maintenance Technician to join our team at Hampton Inn & Suites in Rochester, NY. We offer awesome benefits and a great family culture. JOB SUMMARY: Responsible for supporting regional standards and overseeing day-to-day property responsibilities. MAJOR/KEY JOB FUNCTIONS (includes but is not limited to): • Manage day to day activities and workload of the maintenance team including PM’s meter reports and daily productivity., • Manage all preventative maintenance, building and special projects., • Maintain organized daily procedures and recording processes, • Assign, verify and participate in the completion of all routine maintenance and repairs, • Responsible for monitoring utility, vendors, equipment, technology, and property productivity and large contract projects., • Qualify/ manage/ oversee relationships for regional subcontractors (electrical, mechanical, plumbing), • Communicate effectively with management, staff and guests to ensure the highest quality of service., • Maintain appropriate level of supplies and equipment, • Maintain building equipment and system (HVAC, Plumbing systems, lighting and Electrical infrastructure), • Manage specialized maintenance work (upkeep of elevator, refrigeration units, etc.), • Troubleshoot technology, wireless networks, phones and cables., • Oversee and manage the integrity of all door locks and key controls., • Maintain replacement stock and ordering supplies., • Manage Building Exterior and grounds (Landscaping)., • Work cohesively with Housekeeping department on deep cleaning and furniture upkeep., • Train and Supervise maintenance staff and all independent contractors. Conduct training for other departments on the life safe and emergency procedures of the hotel., • Maintain adequate staffing and schedules for hotel maintenance and upkeep QUALIFICATIONS: • OSHA Training and Compliance, • Understanding of OSHA and compliance standard’s, • High School GED or Equivalent, • 2-3 years of maintenance experience, • EAP certification preferred, • Basic understanding of electrical, plumbing, and mechanical systems, • Active drivers license, • Knowledge of standard construction procedures and building codes; related permits, licenses and existing codes pertaining to public building and fire safety PHYSICAL DEMANDS AND WORK ENVIRONMENT: • Must be able to lift, push, pull, carry, and place objects weighing less than or equal to 50 pounds without assistance., • Must be able to reach overhead and below the knees, including bending, twisting, pulling, and stopping as well as stand, sit and/or walk for any extended period., • The hotel operates 24 hours a day, 7 days per week. Maintenance coverage of property must meet business operations.

Job Description We are a growing veterinary hospital in Rochester New York looking for a Licensed Veterinary Technician to join our team. Looking for full time, but will consider part time applicants. As a Veterinary Technician your duties will include, but are not limited to; prepping animals for surgery, assisting the veterinarians in surgery, in-patient and out-patient care, technician examinations, phlebotomy, laboratory duties, treatments, drug dispensing, medication administration, surgery duties, dentistry, medical record notation and maintenance, inventory, OSHA awareness and compliance, extraordinary customer service and maintaining a practical knowledge of the hospitals procedures, services and policies. Pay based on experience. Company DescriptionFull service small animal hospital located in Rochester east side.Full service small animal hospital located in Rochester east side.

Job Description Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning QS:9000, ISO:9002, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: Repairs and maintains machinery and mechanical equipment, such as motors, pumps, conveyors, belts, fans, air conditioners, etc. Examines mechanical equipment to diagnose trouble. Disassembles machines and repairs or replaces broken parts. Adjusts functional parts of mechanical devices as necessary. Cleans and lubricates parts. Order replacement parts. Inspects completed repairs. Performs all work in accordance with established safety procedures. Requisitions new parts and equipment. Minimum Qualifications: • Knowledge of manufacturing machinery, • High school diploma or equivalent, • Five or more years related experience, • Hands-on knowledge of the mechanics of manufacturing equipment, • Extensive knowledge of electrical wiring, circuits, etc., • Must supply own tools Specific Duties: • Plans, coordinates and executes installation of manufacturing equipment to include routine preventive maintenance, diagnosing mechanical problems and determine how to correct them, • Plans, coordinates and executes facility and grounds requirements as needed, • Establish and maintain maintenance records for equipment and facility, • Order parts supplies and equipment when required to maintain operation of manufacturing facility and grounds, • Ability to communicate requirements to supervisors and also be independent to complete tasks with hardly any supervision, • Keep the building and the equipment in compliance with OSHA regulations, • Ability to work and act in a professional manner as all times This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Job Description Turnbull Heating & Air is a premier heating and air conditioning company dedicated to providing top-tier home comfort solutions to customers in Rochester and Batavia New York. We take pride in our high-quality workmanship, commitment to customer satisfaction, and a strong team-oriented work environment. We are one of the few remaining locally owned family businesses dedicated to our industry. Position Overview We are seeking a skilled and experienced Residential HVAC Installer with a minimum of two years of experience in the field. The ideal candidate will be responsible for installing, replacing, and upgrading home comfort systems, ensuring quality installations that meet safety and code regulations. This role requires technical expertise, attention to detail, and the ability to work independently or as part of a team. Key Responsibilities: • Take a lead role on projects, giving direction and support to the assigned team, working alongside our project managers., • Install, replace, and upgrade residential HVAC equipment, including gas furnaces, condensing units, heat pumps, tankless water heaters, boilers, ductless systems, IAQ products and VRF., • Read and interpret schematics, and technical specifications., • Perform layout, assembly, and installation of ductwork, piping, and controls for residential HVAC systems., • Ensure all installations comply with local building codes, safety regulations, and company standards., • Perform brazing, soldering, and pipe fitting as needed., • Coordinate with project managers and field supervisor., • Provide excellent customer service and maintain professional relationships with clients., • Complete required documentation, such as job reports and material orders., • Troubleshoot and resolve installation issues efficiently., • Maintain a clean and safe work environment. Qualifications & Requirements: • Minimum two years of experience in residential HVAC., • Strong conceptual and practical knowledge of HVAC systems., • Proficiency in reading wiring schematics and technical drawings., • Experience with ductwork installation, brazing, and pipe fitting., • Ability to use hand and power tools safely and effectively., • EPA Universal Certification preferred., • OSHA 10 or 30 certification is a plus., • Ability to lift 50+ lbs and work in various conditions, including heights and tight spaces., • Strong problem-solving skills and attention to detail., • Valid driver’s license with a clean driving record. Compensation & Benefits: • Competitive pay based on experience., • Health, dental, and vision insurance., • Retirement plan with company match., • Paid time off and holidays., • Company-provided vehicle, tools and uniforms., • Ongoing training and career growth opportunities.

ND Global Consulting Services is seeking a travel nurse RN House Supervisor for a travel nursing job in Rochester, New York. • Specialty: House Supervisor, • Discipline: RN, • Start Date: 11/30/2025, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, nights, • Employment Type: Travel Saturday, Sunday and holidays – flexibility for being available any portion of 8a-4p/4p-12a/12a-8. EOW Locals accepted: (Y/N) What is the local radius rule? No locals (75 miles) Pending License accepted: (Y/N) No RTO Restrictions: We will not allow more than 1 week RTO in a contract Patient Diagnoses: At Unity Hospital, the house supervisor is the leader in house responsible for 311+ beds, including ED, our Family Birth place, Surgical Services, 14 medical surgical units, and 1 20-bed ICU. Our ICU charge and providers serve as the RRT and Code Team along with support from the supervisor. We utilize a centralized staffing office with staffing coordinators covering 80 hours/week. We also have an off-shift nurse manager that works 4p-2a - 4 shifts per week to support the building. Certifications: ALCS, BLS Skills: Inpatient Acute Care, MS/Tele, Code Management, Crisis Intervention/Management, De-escalation techniques, Emergency preparedness, Facility/Bed Diversion, Managing Assaultive Behavior, Restraints - physical/chemical, Internal, HIPAA guidelines (Health Insurance Portability and Accountability Act), Death of a patient - documentation and process, Discharge AMA, Fitness for duty, Risk Management, Sentinel events-monitoring and reporting, Customer Service, Experience managing narcotic diversion, Functions as clinical expert resource, Incident reporting, Infection control, Isolation procedures, Starting and maintaining IVs, Knowledge of regulatory requirements- DPH, TJC, OSHA, etc., Organizational escalation process for facility, Supervising nursing care delivered on all units organizationally, Workplace safety, Centralized staffing, Experience with productivity standards and staffing requirements, Coaching and counseling to performance standards Previous Charge Experience Required EPIC Required Scrubs: Navy blue or white combo

Job DescriptionCompany Description Monro, Inc. is one of the nation’s largest auto service companies and major tire retailer. We own and operate more than 1,200 stores in 32 states and our stock trades on the Nasdaq (MNRO). The Monro family of brands includes some the most recognizable names in the industry—Monro Auto Service and Tire Centers, Mr. Tire, Tire Choice, amongst many more regional chains. Our dominance is driven by teammates who strive to provide a five-star experience and deliver consistent value to our guests and shareholders. At Monro, we understand that a 5-star guest experience begins with a 5-star teammate experience. In fact, we’re currently investing more than $100 million in store improvements, new technology, and career development through our own Monro University training platform. Destination Monro – Your Career is Here! Do you have what it takes to shape a better future for yourself and the automotive service industry? Our vision is to be America’s leading auto and tire centers, trusted by consumers as the best place in our neighborhoods for quality automotive maintenance and repairs. We’re looking for motivated individuals at every stage in their career who share our vision. Positions are available in our retail locations across our many brands, in field management, and in store operations at our Store Support Center in Rochester, New York. If you like helping others, as much as you like working on cars; if you enjoy being part of a team, solving problems, and building guest relationships; if you value honesty and integrity - we have a Destination for you at Monro. Contact us to learn more. Destination Monro! – Your career is here. Job Description About the Role: The Technician role is full time or part-time and is an hourly position based on needs of the business. The Technician is primarily responsible for conducting basic vehicle diagnostics and performing routine vehicle repair and maintenance services in accordance with company standards and manufacturer specifications. This position is expected to deliver exceptional 5 Star service to our guests, through effective communication of vehicle issues and proposed solutions, as well as consistently meeting guest expectations for time commitments and quality. Salary Range: $23.00 - $35.00 per hour - Based on experience. This role is eligible for additional compensation and incentives. Responsibilities: • Perform basic vehicle diagnostics to properly identify required repairs., • Consistently complete Monro’s Courtesy Inspection process, on every guest vehicle, identifying, documenting, and communicating additional needed services and repairs; Audit courtesy inspections performed by the General Service Technicians, • Assist in inventory management to include pulling tires and parts, unloading and stocking inventory., • Assist with all general store duties, ensuring the store is in excellent condition and maintained to Monro standards for cleanliness and consistently in guest ready condition., • Consistently perform service(s) in accordance with Monro’s safety standards including but not limited to Monro’s Wheel Torque, Oil safety and compliance procedures, • Test drive vehicles in accordance with Monro’s Road Test policy, including consistently utilizing our dedicated test drive routes, while maintaining all local traffic and safety laws, • Understand and adhere to company policies and procedures, Governmental standards including environmental codes and ANSI/OSHA standards. Consistent use of all required safety standards set forth in training and policies and procedures., • Maintain technical knowledge and capabilities to ensure proficiency through the timely completion of all required Monro University training courses and modules., • Operate, utilize, and maintain all equipment in a safe manner in accordance with Monro and equipment manufacturer guidelines including but not limited to lifts, welders, brake lathes, etc., • Perform other duties as assigned and required. Qualifications Qualifications: • High School Diploma or equivalent., • Automotive training including basic car maintenance and repair or the equivalent combination of education and experience., • ASE certification and State Inspection license (where applicable) preferred., • Must possess a current valid driver’s license and have a satisfactory Motor Vehicle Report (MVR) and have the ability to operate customer’s vehicles to conduct test drives., • Capable of performing basic automotive maintenance, repair, and tire services, • Ability to diagnose problems identifying root cause and determine appropriate repair solution., • Ability to interpret and execute instructions furnished in written, oral, and diagram formats, • Strong customer service skills This job operates in an automotive shop environment. The job will have exposure to a moderate noise level, adverse weather conditions, chemicals, odors, dirt, and dust. Technicians must be able to complete the following but not limited to: • Ability to work flexible hours, days, evenings, weekends, and holidays., • Must be able to see, hear, lift, carry and stock merchandise and supplies up to 50 lbs. without assistance., • Frequent standing and walking for long periods of time., • Frequent reaching overhead and below the knees, including squatting, bending, stooping, kneeling, twisting. Additional Information Benefits: • Performance based incentives, • Paid vacation and holidays for Full-Time Teammates, • Reimbursement for ASE Certifications, • Reimbursement for State Inspection Licenses, where applicable, • 401k eligibility immediately upon hire, • Direct Deposit, • Employee Discounts, • Healthcare, Vision, and Dental for Full time Teammates, • Employee Access Perks Monro Inc. is proud to be an Equal Employment Opportunity / Affirmative Action employer. It is our policy to consider for employment all individuals regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, gender, sex, sexual orientation, gender identity and/or expression, genetic information, veteran status, or any other characteristic protected by federal, state, or local law. INDALX13 Your next Destination! Growth Opportunity: At Monro we’re committed to helping our teammates grow their career through the combination of coursework, demonstrating leadership skills and open opportunities. Our teammates receive on-the-job training, company sponsored certifications, as well as course curriculum in Monro University that empowers them to advance to the next level of their careers. Monro, Inc. is an equal opportunity employer and affords equal opportunity to all applicants for all positions without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Job DescriptionCompany Description Company Info: Monro’s family of brands is one of the leading automotive service and tire dealers in the United States. We work on approximately five million vehicles a year, but with us, it is personal. Every guest is important, and every teammate is valued. That is our people-first approach. Headquartered in our hometown of Rochester, New York, where our founder, Chuck August, opened his first store in 1957, we have grown to nearly 1,300 auto repair shops and tire dealers in 32 states from coast to coast. Monro powers 16 highly respected tire and auto service brands, supporting each company’s regional strength and community connections. From big cities to small towns to rural crossroads, you will find us in neighborhoods of every shape, size, and color. Under the Monro banner, we are united TEAM, and share the same mission to bring our guests the highest quality tire and auto service in the industry. Do you have what it takes to shape a better future for yourself and the automotive service industry? Our vision is to be America’s leading auto and tire centers, trusted by consumers as the best place in our neighborhoods for quality automotive maintenance and repairs. We’re looking for motivated individuals at every stage in their career who share our vision. Positions are available in our retail locations across our many brands, in field management, and in store operations at our Store Support Center in Rochester, New York. If you like helping others, as much as you like working on cars; if you enjoy being part of a team, solving problems, and building guest relationships, if you value honesty and integrity - we have a Destination for you at Monro. Destination Monro -Your Career is Here! Job Description About the Role: The Technician role is full time or part-time and is an hourly position based on needs of the business. The Technician is primarily responsible for conducting basic vehicle diagnostics and performing routine vehicle repair and maintenance services in accordance with company standards and manufacturer specifications. This position is expected to deliver exceptional 5 Star service to our guests, through effective communication of vehicle issues and proposed solutions, as well as consistently meeting guest expectations for time commitments and quality. Salary Range: $23.00 - $35.00 per hour - Based on experience. This role is eligible for additional compensation and incentives. Responsibilities: • Perform basic vehicle diagnostics to properly identify required repairs., • Consistently complete Monro’s Courtesy Inspection process, on every guest vehicle, identifying, documenting, and communicating additional needed services and repairs; Audit courtesy inspections performed by the General Service Technicians, • Assist in inventory management to include pulling tires and parts, unloading and stocking inventory., • Assist with all general store duties, ensuring the store is in excellent condition and maintained to Monro standards for cleanliness and consistently in guest ready condition., • Consistently perform service(s) in accordance with Monro’s safety standards including but not limited to Monro’s Wheel Torque, Oil safety and compliance procedures, • Test drive vehicles in accordance with Monro’s Road Test policy, including consistently utilizing our dedicated test drive routes, while maintaining all local traffic and safety laws, • Understand and adhere to company policies and procedures, Governmental standards including environmental codes and ANSI/OSHA standards. Consistent use of all required safety standards set forth in training and policies and procedures., • Maintain technical knowledge and capabilities to ensure proficiency through the timely completion of all required Monro University training courses and modules. Qualifications: • High School Diploma or equivalent., • Automotive training including basic car maintenance and repair or the equivalent combination of education and experience., • ASE certification and State Inspection license (where applicable) preferred., • Must possess a current valid driver’s license and have a satisfactory Motor Vehicle Report (MVR) and have the ability to operate customer’s vehicles to conduct test drives., • Capable of performing basic automotive maintenance, repair, and tire services, • Ability to diagnose problems identifying root cause and determine appropriate repair solution., • Ability to interpret and execute instructions furnished in written, oral, and diagram formats, • Strong customer service skills Work Environment & Physical Requirements: This job operates in an automotive shop environment. The job will have exposure to a moderate noise level, adverse weather conditions, chemicals, odors, dirt, and dust. Technicians must be able to complete the following but not limited to: • Ability to work flexible hours, days, evenings, weekends, and holidays., • Must be able to see, hear, lift, carry and stock merchandise and supplies up to 50 lbs. without assistance., • Frequent standing and walking for long periods of time., • Frequent reaching overhead and below the knees, including squatting, bending, stooping, kneeling, twisting. Additional Information Benefits: • Performance-based incentives, • Paid vacation and holidays for Full-Time Teammates, • Reimbursement for ASE Certifications, • Reimbursement for State Inspection Licenses, where applicable, • 401k eligibility immediately upon hire, • Direct Deposit, • Employee Discounts, • Healthcare, Vision, and Dental for Full time teammates, • Employee Access Perks Monro Inc. is proud to be an Equal Employment Opportunity / Affirmative Action employer. It is our policy to consider for employment all individuals regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, gender, sex, sexual orientation, gender identity and/or expression, genetic information, veteran status, or any other characteristic protected by federal, state, or local law. INDR2 Your next Destination! Growth Opportunity: At Monro we’re committed to helping our teammates grow their career through the combination of coursework, demonstrating leadership skills and open opportunities. Our teammates receive on-the-job training, company sponsored certifications, as well as course curriculum in Monro University that empowers them to advance to the next level of their careers. Monro, Inc. is an equal opportunity employer and affords equal opportunity to all applicants for all positions without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Job DescriptionCompany Description Company Description: Monro’s family of brands is one of the leading automotive service and tire dealers in the United States. We work on approximately five million vehicles a year, but with us, it is personal. Every guest is important, and every teammate is valued. That is our people-first approach. Headquartered in our hometown of Rochester, New York, where our founder, Chuck August, opened his first store in 1957, we have grown to nearly 1,300 auto repair shops and tire dealers in 32 states from coast to coast. Monro powers 16 highly respected tire and auto service brands, supporting each company’s regional strength and community connections. From big cities to small towns to rural crossroads, you will find us in neighborhoods of every shape, size, and color. Under the Monro banner, we are united TEAM, and share the same mission to bring our guests the highest quality tire and auto service in the industry. Do you have what it takes to shape a better future for yourself and the automotive service industry? Our vision is to be America’s leading auto and tire centers, trusted by consumers as the best place in our neighborhoods for quality automotive maintenance and repairs. We’re looking for motivated individuals at every stage in their career who share our vision. Positions are available in our retail locations across our many brands, in field management, and in store operations at our Store Support Center in Rochester, New York. If you like helping others, as much as you like working on cars; if you enjoy being part of a team, solving problems, and building guest relationships, if you value honesty and integrity - we have a Destination for you at Monro. Destination Monro -Your Career is Here! Job Description About the Role: The Technician role is full time or part-time and is an hourly position based on needs of the business. The Technician is primarily responsible for conducting basic vehicle diagnostics and performing routine vehicle repair and maintenance services in accordance with company standards and manufacturer specifications. This position is expected to deliver exceptional 5 Star service to our guests, through effective communication of vehicle issues and proposed solutions, as well as consistently meeting guest expectations for time commitments and quality. Salary Range: $16.00 - $35.00 per hour - Based on experience. This role is eligible for additional compensation and incentives. Responsibilities: • Perform basic vehicle diagnostics to properly identify required repairs., • Consistently complete Monro’s Courtesy Inspection process, on every guest vehicle, identifying, documenting, and communicating additional needed services and repairs; Audit courtesy inspections performed by the General Service Technicians, • Assist in inventory management to include pulling tires and parts, unloading and stocking inventory., • Assist with all general store duties, ensuring the store is in excellent condition and maintained to Monro standards for cleanliness and consistently in guest ready condition., • Consistently perform service(s) in accordance with Monro’s safety standards including but not limited to Monro’s Wheel Torque, Oil safety and compliance procedures, • Test drive vehicles in accordance with Monro’s Road Test policy, including consistently utilizing our dedicated test drive routes, while maintaining all local traffic and safety laws, • Understand and adhere to company policies and procedures, Governmental standards including environmental codes and ANSI/OSHA standards. Consistent use of all required safety standards set forth in training and policies and procedures., • Maintain technical knowledge and capabilities to ensure proficiency through the timely completion of all required Monro University training courses and modules., • Operate, utilize, and maintain all equipment in a safe manner in accordance with Monro and equipment manufacturer guidelines including but not limited to lifts, welders, brake lathes, etc., • Perform other duties as assigned and required. Qualifications Qualifications: • High School Diploma or equivalent., • Automotive training including basic car maintenance and repair or the equivalent combination of education and experience., • ASE certification and State Inspection license (where applicable) preferred., • Must possess a current valid driver’s license and have a satisfactory Motor Vehicle Report (MVR), • Capable of performing basic automotive maintenance, repair, and tire services, • Ability to diagnose problems identifying root cause and determine appropriate repair solution., • Ability to interpret and execute instructions furnished in written, oral, and diagram formats, • Strong customer service skills This job operates in an automotive shop environment. The job will have exposure to a moderate noise level, adverse weather conditions, chemicals, odors, dirt, and dust. Technicians must be able to complete the following but not limited to: • Ability to work flexible hours, days, evenings, weekends, and holidays., • Must be able to see, hear, lift, carry, and stock merchandise and supplies up to 50 lbs. without assistance., • Frequent standing and walking for long periods of time., • Frequent reaching overhead and below the knees, including squatting, bending, stooping, kneeling, and twisting. Additional Information Benefits: • Performance based incentives, • Paid vacation and holidays for Full-Time Teammates, • Reimbursement for ASE Certifications, • Reimbursement for State Inspection Licenses, where applicable, • 401k eligibility immediately upon hire, • Direct Deposit, • Employee Discounts, • Healthcare, Vision, and Dental for Full time teammates, • Employee Access Perks, • Career Advancement Opportunities This summary is not an all-inclusive description of job duties. Other job duties and responsibilities may also be assigned by the incumbent’s supervisor at any time based upon the Company’s needs. Monro Inc. is proud to be an Equal Employment Opportunity / Affirmative Action employer. It is our policy to consider for employment all individuals regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, gender, sex, sexual orientation, gender identity and/or expression, genetic information, veteran status, or any other characteristic protected by federal, state, or local law. INDALX13 Your next Destination! Growth Opportunity: At Monro we’re committed to helping our teammates grow their career through the combination of coursework, demonstrating leadership skills and open opportunities. Our teammates receive on-the-job training, company sponsored certifications, as well as course curriculum in Monro University that empowers them to advance to the next level of their careers. Monro, Inc. is an equal opportunity employer and affords equal opportunity to all applicants for all positions without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Location: 331 Colfax Street Rochester, NY, 14606 What’s the Job? Ready to accelerate your career while helping our customers move forward? As a Technician at Penske, you’ll do exactly that. Here, you’ll do preventative maintenance and minor repairs on the newest and best maintained fleet of vehicles in the industry. You will help our customers keep their vehicles in shape and on the road. Whether you’re looking for your first job out of school or have some vehicle repair experience and are looking to switch gears, becoming a Penske Technician may be a great fit for you. Why is this job awesome? For starters, no day is the same. You’ll get to work on lots of different types of equipment—not just one manufacturer. We work hard to get the job done, but we also make sure you have the time you need to do the job right. Safety and reliability are our top priorities. Working alongside experienced supervisors and master technicians, we’ll teach you about our vehicle maintenance processes and the cutting-edge technology we use. And we will make sure you are getting the industry certified training you need to succeed and grow your career. You’ll learn from the best in the industry. We also take pride in how clean our facilities are, and we provide you with all the necessary major shop tools. If you are mechanically inclined or have completed any vehicle repair training, are willing to learn, and interested in a stable career with a lot of opportunity for growth, join our team. Main Responsibilities: • Making sure vehicles are maintained and safe for our customers, • Using Penske’s tools and technologies to log, research and complete repairs, including basic vehicle diagnostics, • Doing preventative maintenance repairs—like replacing or rotating tires—and completing vehicle component lubrication and replacement, some electrical system repairs, and cooling system maintenance on gas and diesel engine vehicles, • Partnering with your manager to learn new skills using Penske’s technician training and hands-on coaching, • Working on other projects and tasks as assigned by supervisor Why Penske is for You: • Competitive starting salary: $25.25/hr., • Shift Premiums: $3.00 (2nd shift), $4.00 (3rd shift), • Career stability, • Opportunity for growth, • Strong, well-rounded training on a variety of OEM equipment (Penske’s Technician Certification Program is certified as a Continuing Automotive Service Education provider), • Advanced vehicle maintenance technology, • Location and schedule flexibility Qualifications: • High school diploma or equivalent preferred; vocational or technical certification in vehicle repair preferred, • Basic mechanical aptitude and 1-2 years of automotive or diesel repair experience (preferred), • Valid driver’s license, • The ability to solve problems and comfort using tools, • Excellent customer service skills and communication skills, • The ability to work well as part of a team and outside, • Basic computer skills, • The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management, • The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice., • Regular, predictable, full attendance is an essential function of the job, • As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review., • Willingness to work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education), the ability to pass a drug screen and physical as required by the Department of Transportation, and potential travel within a near geography for training are required This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period., • The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls., • The associate must be able to work safely at heights using applicable ladders and elevated working platforms., • The associate must be able to safely work in all weather conditions., • Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment., • The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. Penske is an Equal Opportunity Employer About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success. Visit Go Penske to learn more. Job Category: Vehicle Maintenance/Mechanics/Technicians Job Function: Truck Maintenance Job Family: Vehicle Maintenance Address: 331 Colfax St Primary Location: US-NY-Rochester Employer: Penske Truck Leasing Co., L.P. Req ID: 2511332

Energy Jobline is the largest and fastest growing global Energy Job Board and Energy Hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide. We focus on the Oil & Gas, Renewables, Engineering, Power, and Nuclear markets as well as emerging technologies in EV, Battery, and Fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers. We’re looking for a skilled Project Manager to oversee mechanical construction projects from start to finish. You’ll ensure projects stay on schedule, within budget, and meet high-quality standards, while maintaining clear communication with all stakeholders. • Oversee all phases of HVAC and mechanical construction projects, • Manage safety compliance and promote a culture of safety on site, • Handle document control and project documentation review, • Manage scope of work, scheduling, and field resources, • Coordinate procurement and support estimating efforts, • Oversee project finances and budgets, • Build and maintain strong relationships with clients, subcontractors, and team members, • Support the sales and business development process as needed, • Bachelor’s degree or equivalent experience, • 3+ years in the construction or building industry, preferably in mechanical or HVAC projects, • Strong understanding of mechanical systems, design principles, and construction documents, • Proficient in Microsoft Office and estimating software, • PMP certification and OSHA 30 #J-18808-Ljbffr

Job Description Celebrating over 50 years of excellence, Precise Tool & Manufacturing Inc. is a family-owned, Rochester-based leader in advanced CNC machining and custom manufacturing. Our 280,000 sq. ft. facility houses over 160 state-of-the-art CNC machines. With 50 high-speed 4-axis horizontal machines, we deliver exceptional efficiency and accuracy for intricate, multi-sided machining, allowing us to meet the most demanding production requirements with speed and precision. We are a trusted supplier across industries such as aerospace, defense, medical, energy, and power generation, recognized for our dedication to quality, safety, and innovation. At Precise Tool, we foster a collaborative work environment where employees are valued and supported. We offer competitive compensation, comprehensive benefits, and opportunities for professional development. Join our team and be part of a company that combines cutting-edge technology with a commitment to excellence and employee success. Precise Tool & Manufacturing Inc. is recruiting for a skilled Equipment Maintenance Mechanic. JOB SUMMARY: Under the direct supervision of the Equipment/Facilities Maintenance Group Leader, the Equipment Maintenance Mechanic position is responsible for the installation, maintenance and repair of the CNC machinery and equipment. ESSENTIAL FUNCTIONS: • Assemble and install machinery and equipment to include wiring, electrical and electronic components, pipe systems, plumbing and programming to meet specifications., • Study blueprints and manufacturers’ manuals to determine correct installation and operation of machinery and equipment., • Prepare requisition for parts and materials needed to perform the job and record parts and materials used., • Analyze test results, machine error messages and information obtained from operators to identify and troubleshoot mechanical and electrical problems. Repair or replace defective parts and reassemble machinery and equipment., • Observe and test the operation of machinery and equipment to diagnose malfunctions using voltmeters and other testing devises., • Disassemble machinery and equipment to remove parts and make repairs., • Examine parts for defects such as breakage and excessive wear., • Perform routine preventative maintenance on machinery and equipment including cleaning, lubricating and adjusting parts to be certain that the machinery and equipment continue to run smoothly., • Operate newly repaired machinery and equipment to verify the adequacy of repairs., • Reassemble machinery and equipment after completion of inspections, testing and/or repairs., • With a quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved., • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes., • Maintains adequate levels of performance and motivation despite job tasks that are routine or repetitive., • Ability to understand and carry out oral and written directives., • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible., • Thorough operational knowledge and skills of specific equipment to be operated, including inspection equipment., • Strong mechanical aptitude., • Ability to communicate effectively in writing as appropriate., • Must use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems., • Ability to use hand and power tools including hoists, saws, drills, wrenches, precision measuring instruments, electrical and electronic testing devices., • Ability to perform skilled work in a variety of building trades including having knowledge of materials, methods, terminology, equipment and tools used., • Must be able to interpret and work from sketches, blue-prints or drawings., • Must be knowledgeable of occupational hazards and standard safety practices in the heavy equipment industry., • Must be knowledgeable of OSHA regulations specific to the machining industry., • Technical School or Certification in Industrial Maintenance, • 5-10 years of combined experience in mechanics and repairer trades, precision production trades, • Vacation, • Sick Days, • Holidays, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance Precise Tool & Manufacturing Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Precise Tool & Manufacturing Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources at (585) 247-0700 Ext. 203. Monday-Friday 7:30 AM to 4:00 PM

Job Description RED-Rochester is a multi-utility generation plant and district energy supplier to one of the world’s most comprehensive industrial parks: the Eastman Business Park. Supporting a 1,200-acre campus, RED-Rochester has the utilities, infrastructure, technical services, support services, space and complementary regional resources to benefit a wide range of industry verticals. We are seeking a Steam Turbine Utilities Mechanic who enjoys the challenge of solving problems that improve service to our customers. Our infrastructure consists of a blend of classic and modern industrial assets and requires a person with a mechanical and technical expertise – able to instruct and supervise others; able to manage both up and down the organization; able to work collaboratively with other departments to achieve success. Summary: Responsible for maintenance and repairs of industrial mechanical equipment associated with Steam & Electric utilities generation across Eastman Business Park for Red-Rochester, LLC. Essential Duties and Responsibilities: • Maintain Clear and Consistent Communication relating to the current status, performance and needs of your assigned location with RED-Rochester team supervisor, maintenance planner and operations staff. Ensure all RED-Rochester customer communicated concerns are immediately communicated and appropriately responded to., • Assists Maintenance Planner to develop standard preventive maintenance routines to ensure maximum equipment uptime and lifespan is attained for all responsible systems., • Assists Maintenance Planner to develop corrective (repair) maintenance job plans as needed to ensure all equipment repairs are completed in a timely basis to maintain all system redundancies for optimum emergency performance., • Coordinates with Maintenance Planner, all shutdown planning (routine & emergency) for the execution of maintenance activities to include Customer end-user notifications., • Complete all planned maintenance routines for assigned locations, documenting all actions within the RED-Rochester work order management system (MAXIMO®)., • Complete all assigned corrective maintenance actions, documenting all actions within the RED-Rochester work order management system (MAXIMO®)., • Supervise (if Vendor lead), Lead and/or Complete (If RED-Roc lead) any assigned equipment Overhaul, Upgrade or Modernization Activities to related Equipment competencies listed below., • Supervise any outside Contractor executing work within your assigned work location to ensure compliance with RED-Rochester safety policies and that the RED-Rochester standards for workmanship are maintained., • Assist in the development and implementation of Health, Safety and Environmental Plans related to assigned locations., • Work, as needed within the larger team structure for Red-Rochester major emergencies or catastrophic failures., • Use of hoists, pulleys, dollies, rollers, trucks, overhead cranes and rigging, lathes, & shop equipment., • All sizes of Pumps from single stage low pressure centrifugal to multi-stage high-pressure (up to and beyond 2000PSI)., • Main Plant Multi-Stage Air Compressors (>5000scfm)., • Steam Turbines (5-1400PSI) to drive all styles of utilities generation rotating equipment., • Gas Turbines (up to 35,000 sHP) – future, • Excellent and Clear Communication skills, • Demonstrated ability to work independently or within a team environment., • Demonstrated Mechanical aptitude and abilities, • Demonstrated Electrical aptitude and abilities, • Demonstrated conceptual and practical trouble shooting skills, • Ability to follow procedures, work instructions and safety/environmental regulations, • High school diploma/GED, • 10 years of applicable utilities mechanic or millwork experience (or comparable Military Service experience within defined trade)., • Applicable Associates or Bachelor’s degree preferred, but not required. Qualifications or Licenses:, • Must obtain required safety operator licenses, as needed for fork truck, man lift and scissor lift within 12 months (Employer Provided), • Immediately obtain OSHA 10hr certification., • Must obtain OSHA 30hr certification within 12 months., • Industrial environment/power plant/treatment plant atmosphere, • Working outside in all weather conditions, • Workspace may include chemical areas, noisy areas and areas that may be very dirty, • Aspects of your job may include possible exposure to Hazardous Materials, such as Asbestos, Lead paint, and other chemicals or waste products. All required PPE and safety training will be provided to eliminate associated risks.Physical Demands, • Position requires strenuous effort, climbing, stair climbing, and crawling to accomplish equipment isolation and movement of material, • Lifting and carrying of a variety of equipment weighing up to 50 lbs is sometimes necessary Employee DOES: (67-100%) Continuous (34-66%) Frequent (4-33%) Occasional (1-3%) Seldom ( 0%) Never Simple Grasping X Gripping with Force X Fine Manipulation X Pushing X Pulling X Bending X Kneeling X Twisting/Turning X Climbing X Carrying X Sitting X Walking X Standing X Working above shoulder level X

Job Description Role Description - Warehouse / Equipment Maintenance Coordinator Reports To: General Superintendent The Warehouse/Equipment Maintenance Coordinator is responsible for organizing, maintaining, and managing the logistics of company-owned tools, equipment, and job site materials. The ideal candidate takes pride in keeping things running smoothly, ensuring that all equipment is inventoried correctly, serviced, and readily available when and where it's needed. This hands-on role plays a key part in the success of our project teams. Key Responsibilities: · Inventory Management: o Maintain organized storage of all equipment, tools, parts, and jobsite supplies. o Keep inventory tracking logs accurate and up to date. o Ensure proper handling, storage, and security of materials both in the warehouse and at job sites. o Maintain and update a list of miscellaneous building hardware; distribute to project managers and site superintendents monthly. o Fulfill hardware requests by pulling and delivering parts to job sites, updating inventory logs accordingly. · Equipment Transport: o Pick up and deliver company-owned equipment between storage facilities and job sites as needed. o Ensure safe and secure transportation and set up of equipment and supplies. · Maintenance & Repairs: o Perform routine preventive maintenance (PM) on all company-owned equipment, including but not limited to: § Oil changes § Greasing equipment § Cleaning condenser coils on commercial dehumidifiers § Replacing belts, capacitors, and switches on commercial air movers (fans) o Maintain a detailed maintenance and repair log for each piece of equipment, tracking: § Preventive maintenance schedules and procedures § Dates and descriptions of work performed § Equipment location at time of maintenance (jobsite, warehouse, or repair shop) § Equipment readiness for job site use o Coordinate with outside repair centers for major repairs beyond in-house capabilities. Skills and Qualifications · Strong mechanical aptitude and troubleshooting skills · Intermediate knowledge of: o Gasoline and diesel engine systems o Basic equipment for electrical repairs (e.g., switches, capacitors) o Equipment plumbing (e.g., check valves, condensate pumps) · Ability to lift and move 70+ lbs. as needed · Comfortable working in remote or outdoor job site environments with limited access to utilities · Ability to work independently and follow through on assigned tasks without constant supervision · Strong organizational skills and attention to detail · Additional Requirements: o Valid driver’s license o Personal pickup truck or equivalent vehicle capable of hauling equipment; includes a truck allowance and fuel card o Responsible for supplying own hand tools; Christa will assess and provide any specialty tools as necessary · OSHA 10 certification required at time of hire · Work Environment: o Field-based travel throughout the central, northern, southern tier, and western NY o Fast-paced and dynamic work environment; candidates must be able to work at “Christa speed” – efficiently and proactively Hours between 16 - 24 Occasionally 30 Company DescriptionChrista has completed over $7.0 billion worth of construction throughout New York State. We have experience in the construction of multi-family, senior and student housing, commercial offices, municipality work, medical facilities, warehouses, hotels and restaurants. Whether you see our Christa sign in front of a housing complex, on a college or hospital campus, or in front of a major athletic stadium, our goal is always the same—to build value for our clients, the facility’s end users and the communities these buildings will serve. That’s been the way since 1982.Christa has completed over $7.0 billion worth of construction throughout New York State. We have experience in the construction of multi-family, senior and student housing, commercial offices, municipality work, medical facilities, warehouses, hotels and restaurants.\r\n\r\nWhether you see our Christa sign in front of a housing complex, on a college or hospital campus, or in front of a major athletic stadium, our goal is always the same—to build value for our clients, the facility’s end users and the communities these buildings will serve. That’s been the way since 1982.

Job Description Simply put, Pyle People Deliver. Since 1924, A. Duie Pyle has been family-owned and operated. Built by our core values of integrity, service first, and empathy, we’re dedicated to exceptional customer service and empowering our employee’s success. If you’re ready to build a career with a company that continues to lead the supply chain and logistics industries, we’d love to hear from you. Position Summary: As a Dedicated Regional Field Operations Manager for A. Duie Pyle, you will be responsible for managing operations across multiple dedicated accounts and overseeing a growing book of business. This role focuses on fostering team collaboration, strengthening customer partnerships, and driving operational growth. The responsibilities of the position include, but are not limited to: • Managing and developing their assigned Dedicated Accounts. Traveling as required to various customer locations, • Partnering with Operations and Recruiting to ensure proper onboarding of the customers and onsite personal, • Overseeing the P&L for their regional (financial performance forecasting); managing customer and regional KPIs (operational goals), • Creating customer service first solutions. Recognizing areas that need improvement with a vision to develop an action plan tailored to each account, • Executing necessary precautions to ensure safety and compliance with Company, OSHA, and DOT rules and regulations, • Minimum five (5) years of previous transportation experience, ideally within a Dedicated Account Management role, • Demonstrated leadership experience; ability to lead, teach, and mentor staff, • Ability to solve complex problems in a fast-paced environment, • Strong communication skills; excellent attention to detail and organizational skills, • Proficient with MS Office applications; strong computer literacy, • Ability to work all shifts as required We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Rochester, NY SUMMARY: Provide engineering duties as assigned by Plant Engineer and/or Plant Manager. Responsible for overseeing new equipment installations as well as modifications to existing equipment as assigned by Plant Engineer. Maintain PLC, HMI, and Drive programming software. Provide detail drawings of parts that need to be manufactured in our shop or by an outside machine shop. Oversee plant engineering duties in the Plant Engineer’s absence. Troubleshoot and repair equipment problems that effect productivity of the manufacturing group. Be involved with process improvements providing input in production problem solving. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: • Providing detail drawings., • Active in troubleshooting electrical, electronic, and mechanical problems in a manufacturing environment., • Well versed in PLC and HMI programming., • Well versed in digital and analog AC/DC drive design, programming and installation., • Well versed in computer (PC) fundamentals, including communication protocols, Microsoft Operating systems and Microsoft Office software., • Manage new equipment installations and startups., • Design, install and startup equipment modifications., • Negotiate price and purchase equipment and services as needed., • Draft capital expenditure requisitions - gather information for justification of capital, obtain cost of capital items., • Fill out project item listings., • Provide managerial input to the maintenance department as well as outside contractors., • A fundamental understanding of regulations including OSHA, NFPA, NEC, EPA, and WDNR., • Responsible for working safely and being a safety leader. Directly supervises employees in the Maintenance Department in the absence of the Maintenance Manager. Carries out supervisory responsibilities as necessary in accordance with the organization's policies and applicable laws. Responsibilities include training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. Requirements: QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and EXPERIENCE: A bachelor's degree, Associate's degree, or equivalent in a related field is required. An additional year of relevant full-time experience and/or training is preferred. LANGUAGE SKILLS: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS: Ability to work with mathematical concepts such as Ohm’s Law, probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. REASONING ABILITY: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel. The employee frequently is required to sit and talk or hear. The employee is occasionally required to stand; walk; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and hear, taste or smell. This position may require manual lifting not to exceed 50 lbs – reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. WORK ENVIRONMENT: While performing the duties of this job, the employee is occasionally exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; extreme cold; extreme heat; risk of electrical shock; risk of radiation; and vibration. The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: .

Job Description Who We Are: Krones Process Group North America is the subsidiary of the Krones Group, a global leader in the supply of beverage and liquid food filling and packing lines. Krones Process Group North America provides turnkey hygienic process solutions for the brewery, beverage, liquid food, dairy, and HPC industries. We have internal dedicated teams to support the entire process from sales to project management, engineering (design, process, automation), procurement, manufacturing, installation, and after-market lifecycle services support. We deliver the highest quality found in the industry, tailored to fit our customers specific needs. Reasons To Join Our Team: At Krones Process Group North America we are seeking individuals to join our team who have fresh ideas and are open to change. All team members have a voice and are encouraged to provide input. The future of Krones Process Group North America is focused on growth, and the continued development of our team. We offer a full benefits package to include Competitive pay, Health, Dental, Vision, STD, LTD, Employer Paid Life, Voluntary Life, Generous Vacation and Sick/Personal Time, and 401K with company match. Job Purpose or Summary: The Mechanical Design Engineer is responsible for creating models of the equipment skids and structural assemblies for the process system. They will develop and maintain a comprehensive model layout for the project. They will also lead procurement specifications for all piping, tubing, and structural materials outlined in the developed model. In addition, they will aid in cost estimation of the mechanical systems and labor hours during proposal development. Job Duties and Responsibilities: • Creation and modification of parts for materials & components., • Develop comprehensive models of equipment and structural assemblies., • Maintain all-inclusive 2D & 3D model of system mechanical layout., • Construct Piping models for interconnectivity of all system assemblies., • Adherence in design of all models to sanitary requirements, engineering standards, and equipment installation guidelines., • Presentation for and collaboration with team members and customers for review of developed models for acceptance., • Generate detailed manufacturing drawings for production of all developed models., • Develop and manage comprehensive Bill of Material for purchase of specified materials and parts., • Cost estimation of the mechanical systems and labor hours during proposal development., • Travel to different facilities and/or customer sites as needed. Preferred Qualifications: Education: Bachelor’s degree in mechanical engineering. Experience/Training: 3-6 years of experience in a related field. Professional Skills • Technology Proficiency with PCs, Mobile Devices, Windows Operating system, and Microsoft Office Suite, with ability to learn new software packages as required., • Excellent verbal and written communication skills, with ability to present professionally to internal team members and external customers., • Takes initiative and is capable of developing solutions for complex problems., • Maintains high quality standards and provides dependable results for team members and customers. General social skills, capacity for teamwork, problem-solving competence, general project management, time- and self-management, coordination and organizational skills, and communication skills. Physical / Working Demands • The work environment is a professional office environment where a conservative business dress code is in effect. The noise level in the work environment is usually moderate. This position will require visits to the manufacturing floor as needed. While performing the duties of this job, the employee is regularly required to sit; use hands to type, handle, or feel; and talk or hear. Specific vision abilities required by this job include close vision, distance vision, and ability to adjust focus., • Equipment use includes computer, calculator, measuring devices., • Ability to understand both spoken and written directions and good vision required., • Personal protective equipment required includes protective toed safety shoes and safety glasses with side shields (when on the manufacturing floor)., • Maintain a safe working environment and comply with all safety and environmental policies/procedures. Each employee is to place environment, health and safety requirements as the first priority in the performance of their work duties. An employee is responsible for notifying their immediate supervisor of a violation or deficiency in working conditions and for recommending corrective measures, if possible. Additionally, the employee’s immediate supervisor is to be notified of every injury or illness or near miss., • Appropriate OSHA safety training is required. *The mental and physical requirements described here are representative of those that must be met by an individual to successfully perform the essential functions of this position.

Job DescriptionStep into a pivotal role as a Sterile Processing Tech in Rochester, New York, where precision, patient safety, and operational excellence converge to ensure every surgical procedure proceeds with flawless sterility. In this position you will safeguard sterile practices from decontamination through the final sterile storage, enabling clinicians to deliver exceptional care with confidence. This is more than a job—it's a chance to shape outcomes, contribute to a resilient health system, and experience the distinctive energy of upstate New York, from the scenic shores of the Finger Lakes to the vibrant neighborhoods that celebrate culture, cuisine, and outdoor adventures all year round. Imagine the pride of supporting life-changing procedures while enjoying a region renowned for its natural beauty, universities, museums, and a welcoming community spirit. Location benefits abound. Working in Rochester offers a thriving medical ecosystem, renowned hospitals, and a patient-centered culture that values teamwork and process excellence. You’ll benefit from a stable urban base with easy access to parks, riverside trails, and the cultural richness of a growing city. Additionally, this opportunity opens doors to assignments across the United States, letting you experience a spectrum of facilities—from academic medical centers to community hospitals—each with its own instrumentation, protocols, and workflow. This exposure broadens your skill set, strengthens your professional resumé, and builds a versatile foundation for future advancement. Rochester itself blends historic charm with modern amenities: a lively downtown, craft breweries, world-class dining, and ample opportunities for relaxation after demanding shifts. It’s a locale that supports a healthy work–life balance while honoring the essential role sterile processing plays in patient care. Role specifics and growth are at the heart of this assignment. You will perform decontamination, inspection, assembly, and sterilization of a wide array of instruments and devices, ensuring every kit is complete, functional, and traceable. Your responsibilities include instrument decontamination, load packaging, sterilizer operation (steam, EtO or alternative modalities as applicable), washer-disinfector use, and rigorous quality checks to verify cycle success, chemical indicators, and documentation accuracy. You’ll maintain meticulous logs for lot control, instrument tracking, and storage conditions, adhering to AAMI, JCAHO, OSHA, and hospital policies. You’ll collaborate with OR teams, central supply, and procurement to optimize turnover times, minimize delays, and support optimal patient flow. There is ample room for professional growth—whether pursuing CSPDT or CRCST certification, expanding knowledge of sterilization technologies, or taking on process-improvement projects that enhance safety and efficiency. The role also invites cross-training opportunities across related sterile services functions, enabling you to broaden your expertise and earn recognition within a dynamic hospital system. Benefits and incentives reinforce your commitment. Along with competitive weekly pay ranging from $1,031 to $1,134, you’ll find a suite of support designed for traveling professionals: a sign-on or retention bonus where permitted, housing assistance to ease relocation or temporary lodging, and potential contract extensions that recognize reliability and performance. You’ll have access to a robust support network, including 24/7 assistance from our dedicated travel-support team to help with housing, travel logistics, on-site accommodations, and emergency needs. This structure ensures you can focus on your responsibilities with the confidence that assistance is available whenever you need it. The combination of structured pay, predictable rotation opportunities, and professional development paths makes this assignment a compelling step in your career trajectory. Company values center on empowerment, growth, and a supportive work environment. We are committed to elevating sterile processing professionals by providing clear pathways for advancement, ongoing training, mentorship, and a culture that prioritizes safety, integrity, and teamwork. Our approach respects your expertise, supports work-life balance where possible, and encourages you to take ownership of your professional journey within a collaborative, patient-centered framework. Call to action: if you’re ready to contribute to sterile processing excellence and to grow within a forward-thinking team, apply now. This is your opportunity to join a company that values your dedication and invests in your development while you deliver critical care across diverse settings. Start Date is 12/15/2025, for a contract lasting several weeks, with weekly pay in the stated range. Hours are not guaranteed and may vary by assignment; final compensation packages and guaranteed hours will be confirmed during the hiring process. Note: the listed hours and pay rates are estimates and may vary. TLC Nursing is a nationwide healthcare staffing agency that provides high-quality, dependable healthcare professionals to hospitals, long-term care facilities, clinics, and home health organizations across the United States. Built on the values of trust, reliability, integrity, and exceptional patient care, TLC Nursing has become a preferred partner for facilities looking for consistent and compassionate clinical support. We place Registered Nurses (RNs), Licensed Practical Nurses (LPNs), Certified Nursing Assistants (CNAs), Allied Health professionals, Travel Healthcare Workers, and more. Through a people-first approach and deep industry expertise, we match the right clinicians to the right opportunities while supporting them throughout their entire assignment. Shift Shield – Industry-Exclusive Protection TLC Nursing is the only company in the healthcare staffing industry to offer Shift Shield — a program designed to protect clinicians from preventable assignment disruptions and ensure they are compensated fairly when facilities cancel shifts unexpectedly. Shift Shield provides: • Guaranteed compensation for last-minute or preventable facility-driven cancellations, • Protection against income loss, giving clinicians peace of mind, • A consistent and fair work experience, unmatched by competitors Why Healthcare Professionals and Facilities Choose TLC Nursing ✓ Proven Industry Expertise More than two decades of staffing experience with a strong understanding of travel contracts, compliance, credentialing, and rapid deployment. ✓ Highest Standards of Quality & Compliance We follow rigorous screening processes to ensure each clinician meets all state, federal, and facility-specific requirements. ✓ Premium Support for Clinicians Dedicated recruiters, 24/7 availability, and a supportive approach that focuses on communication, transparency, and long-term relationships. ✓ Nationwide Coverage Staffing solutions in all 50 states, including travel contracts, per-diem, local contracts, permanent placements, and crisis response. Mission Statement To enhance the delivery of patient care by connecting exceptional healthcare professionals with the facilities that need them most — while providing unmatched support, protection, and reliability through programs like Shift Shield. Next Steps Thank you for choosing TLC Nursing for your next travel assignment. Let's expedite your submission to the job of your liking by completing your professional profile on our iTraveler app. We invite you to download our iTraveler app from the App Store or Google Play to simplify your travel nursing journey. The iTraveler app streamlines your experience, providing access to job listings, schedules, and important updates at your fingertips. Stay connected with TLC Nursing and take control of your healthcare career with the iTraveler app. We highly recommend our applicants install the iTraveler app along with completing their professional profile and uploading the following documents: • Resume, • Active BLS, • COVID Vaccination Card, • Two Professional References, • Skills checklist Did you know you can earn up to $1000 per referral? You DO NOT need to be an employee of TLC Nursing to earn this $$$. You can track each of your referrals and get paid out with Visa Gift Cards once your referral meets our requirements. Click Here to Get Started earning unlimited Referral BONUS!!! You DO NOT need to be a current or former employee of TLC Nursing to earn referral bonuses; EVERYONE Qualifies for this BONUS!!! So, WHY choose to travel with TLC Nursing? TLC Nursing is your destination for boutique healthcare jobs, whether it is Travel, Local, Per Diem, or Permanent Placement. TLC Nursing is your trusted career partner. We offer competitive compensation, comprehensive benefits, and a supportive work environment that fosters growth and development. At TLC Nursing, we're not just a staffing agency but a healthcare family dedicated to positively impacting our community. Join a dynamic team and become part of a caring community that values your skills, dedication, and contributions. Why Join TLC Nursing? TLC Nursing has the best and the highest-paying travel RN, travel LPN, and travel Allied jobs. Discover rewarding careers in travel nursing with TLC Nursing, a nurse-owned and operated travel nursing agency. Our wide range of job listings includes travel nursing jobs, travel allied jobs, travel RN jobs, and travel LPN jobs. Competitive Compensation: Earn the best weekly rates on your assignment. We will beat any offer for the same open position. Diverse Work Settings: You will experience diverse environments such as acute care, long-term care, schools, clinics, summer camps, and prisons. Guaranteed Hours: Secure a consistent 36 or 40-hour workweek with opportunities for overtime. Benefits: Your Wellbeing Matters: Health, Vision, and Dental Insurance. 25K Life Insurance on day one! 401 (k) with a matching contribution. Paid Time Off (PTO) Immediate availability of Aflac for your purchase. Stay Comfortable: Opt for our fully furnished housing, including utilities, or choose a housing stipend. Unlimited referral bonus! Access to unlimited continuing education units online. We are proudly a Nurse-owned and operated travel nurse and travel healthcare staffing agency! Vermont Business Magazine voted us The Best Staffing Agency in 2025, 2024, 2023, 2022, 2021, 2020, 2019, and 2017! TLC Nursing provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Powered by JazzHR uGbMhZSNdN

Job DescriptionBenefits: • 401(k), • Bonus based on performance Our mission to "Reinvent Contractor Service", is best achieved by investing in our employees, always doing what's right, and delivering a 5-star experience every step of the way. When we invest in our employees, we create a rewarding, satisfying culture that fosters rapid personal and professional advancement. Happy employees lead to better experiences for our customers, a better community for us to live and work in, and a better world. Lets be better! Our Skills Ladder approach provides an up-front, transparent pathway to job advancement and pay increases. This puts you in control of your career. We provide training, tools, personal and professional improvement resources, and routines that will help you be the best you can be on the job, with your team, and in your personal life. You bring the desire to succeed and the energy to make it happen, and we'll help you get there! Find out why our culture is at the core of being a Top 100 Culture Award Winner and an official Certified Great Place To Work! The ideal Entry Level Gutter Installer candidate will possess: • Positive attitude, • Desire to grow with the company, • Team player, • Excellent communication skills, • 2 years exterior home improvement, carpentry, or other relevant construction experience is a plus, but not required, • Ability to work outside in all weather conditions/seasons, • Previous experience specifically related to gutter services/installation, and a passion for all things gutters (like us) is a huge plus, but not a requirement!, • A desire to establish a positive work culture for all, • A great sense of humor, • valid driver's license Apply now to become an Entry Level Gutter Installer!

Job Description Job Title: Heavy Duty/ Equipment Mechanic Overview: Suit-Kote Corporation, a leading Asphalt products manufacturer, road construction and maintenance and asphalt application engineering company is seeking candidates for qualified auto and heavy equipment mechanics. Safety Expectations: All Suit-Kote employees are required to comply with all safety rules and to observe safe work practices and operating procedures at all times. Whenever on Suit-Kote property or job sites, or operating Suit- Kote equipment, employees are expected to conduct themselves in a manner that promotes the safety of the employee, co-workers and others. Responsibilities/Job Duties: • Diagnose and repair electrical, cooling, computer fuel, emissions, and hydraulic systems on HD trucks and trailers, • Diagnose and repair electrical, cooling, computer, emissions, fuel and hydraulic systems specialized on construction equipment ie. Chippers, pavers, rollers, mills, etc., • Follow paper-flow procedures, including documenting correct mileage/hours and safety procedures and complete and maintain maintenance records and job orders, • Routine maintenance such as: changing oil, checking batteries, safety inspections, brake repairs, and lubricating equipment., • Examine vehicles and equipment to determine if additional safety or repair work is needed. Required Skills/Abilities: • Supply own tool set for heavy highway construction equipment, • Reliable transportation to and from work, • Minimum of 5 years experience in industry or heavy-duty training, • Physical Organization and time management, • Must have or be willing to obtain an OSHA 10 Hour Safety Certificate, • Basic welding knowledge/ experience, • Willing to report to onsite repair orders, • Ability to work in a team setting, • Communicate clearly and effectively with team members Physical Requirements: • Flexibility in hours - overtime and weekend hours may be necessary, • Passing a pre-employment drug and alcohol screening is required and a background check will be conducted, • Must be able to lift up to 100 pounds, • Observe and comply with necessary PPE requirements, • Must be able to work in a noisy area with many odors present, • NYS Inspector's License, • Commercial Driver's License, • Obtain or willingness to obtain a Medical Card, • Ability to operate manual transmission or be willing to learn, • Ability to read and understand SDS, • Air brake certified, • Previous industry equipment training, • Willingness to obtain company provided forklift training, • Basic computer skills (Microsoft Office), • Basic math skills Salary Range: $25-$45 Additional Duties: This job description in no way states or implies that these are the only duties to be performed. You will be expected to follow any other job-related instructions and to perform other job-related duties as requested by your supervisor. Benefits: Suit-Kote offers competitive wages, paid time off, and a growth oriented work environment. We extend employer-paid medical and dental benefits, as well as employer-paid life insurance to all full-time employees. Road call differential pay available. Personnel are eligible for participation in our 401k plan as well as supplemental benefits. Equal Opportunity Employer/Veterans/Disabled Equal Opportunity Employer/Veterans/Disabled Job Posted by ApplicantPro

Job Description We currently seeking a Safety Specialist within our Building Engineering division for various construction and civil projects throughout New York State. Our LaBella safety team provides safety management services and training to clients for all industries and markets. This position would report to our Latham, NY safety manager. This safety position is highly dynamic and requires long term travel assignments. The successful candidate will have the ability to work with our client's management team, safety staff and labor to assure on-site safety compliance. The position will be located on one of our client's project sites and have the ability to guide, lead and provide corrective actions, as needed. Duties • Review and comply with safety programs and procedures, • Provide Toolbox Talks, • Develop weekly/monthly corrective actions report, • On-site training when needed Salary Range: $70,000 - $85,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • 10+ years of construction, environmental, civil safety experience., • OSHA (30hr) Construction, • Hazwoper (40hr/8hr), • CPR/AED/FA Trained, • Must be willing to travel (overnights) and be assigned to long term (2-6 months) projects. Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description We currently seeking a Safety Specialist within our Building Engineering division for various construction and civil projects throughout New York State. Our LaBella safety team provides safety management services and training to clients for all industries and markets. This position would report to our Latham, NY safety manager. This safety position is highly dynamic and requires long term travel assignments. The successful candidate will have the ability to work with our client's management team, safety staff and labor to assure on-site safety compliance. The position will be located on one of our client's project sites and have the ability to guide, lead and provide corrective actions, as needed. This will be a part time role. Duties • Review and comply with safety programs and procedures, • Provide Toolbox Talks, • Develop weekly/monthly corrective actions report, • 10+ years of construction, environmental, civil safety experience., • OSHA (30hr) Construction, • Hazwoper (40hr/8hr), • CPR/AED/FA Trained, • Must be willing to travel (overnights) and be assigned to long term (2-6 months) projects., • Ability to provide safety training not required; however, much preferable. Salary Range: $40 per hour The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife® ultra-filtered milk; Core Power® High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife® nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. The construction of fairlife's manufacturing facility in Webster, NY is underway. This state-of-the-art, 750k sq ft, greenfield plant is expected to be operational in late 2025 and will lay the foundation for fairlife's next phase of growth as the leading dairy nutrition provider. While coupling the industry's latest technologies and fairlife's operational excellence to build this world-class facility, fairlife plans to hire 250 new employees and bring in approximately 5 million lbs. of milk a day, with room to grow over the coming years. shift schedule: This is a Monday through Friday role that requires flexibility to be available outside of standard business hours, including occasional weekends as needed. job purpose: The Environmental, Health & Safety Technician (EHS Technician) will provide broad support to the site in the area of Safety, Health, and Environment. The primary objective of the role is to provide regular support to site operations at points of execution (on the shop floor). Promotes and contributes to a site culture where Safety, Health and Environment are engrained as a core value with all employees. Assists EHS program implementation and daily follow-up and trains other employees in key EHS areas as necessary. Ensures on-going excellence in EHS compliance and expected work practices on the shop floor. responsibilities: • Site EHS Culture – under direction of the Site Sr. Environmental, Health & Safety Manager, Technician leads/fosters/develops a culture where safety, health and environment are ingrained as a core value with all employees, everyone believes zero is achievable, everyone is actively engaged in performing their work in a safe manner, everyone actively interacts with co-workers to prevent at-risk behaviors. Coaches the team on Behavior Based Safety Observations and Risk Predictions, • EHS Strategies, Programs and Plans – Implement and participate in company EHS policies, processes and procedures including but not limited to:, • EHS Team Meetings; EHS Committees, SHE Pillar, • Job Hazard Evaluations, Internal Audits, Incident Investigations & Hazard Abatement, • Monitoring and Coaching of High Hazard Work: Confined Space Entry, Electrical Safety, Hot Work, Work at Height, Line Break, Critical Lifting, • Evaluation of Machine Guarding/ Validation of LO/TO/TO Procedures and Worker Competency, • Personal Protective Equipment Risk Assessment/ Evaluation/ Revisions, • Validate Emergency Response procedures/ equipment, • Participate in Emergency Response drills/ evaluate effectiveness, • Take an active role in site waste management audits and practices, • Educate the team on their ISO 14001/ 45001 Requirements, • Chemical inventory and management/ chemical safety assurance, • Compliance and technical expertise support – Provides day-to-day guidance, technical expertise/ coaching and support to all employees regarding health & safety practices, interpretation of company health and safety policies, problem resolution, and compliance with federal and state law, • Safety & Environmental Management Systems (SMS/ EMS) Verification – Performs monthly Safety Inspections to ensure the SMS and EMS requirements are being met in the daily operations of the site so the team is always audit ready, • Incident Investigation and Analysis – Participate in and support all teams in formal incident reviews for all incidents that result in a First-Aid, recordable injury or illness/ reportable environmental event (i.e.: Workers Compensation claim, Lost Time incident, spill or release), project damage or serious Near Miss/ Serious Injury Fatality potential (SIFp), • Risk Assessment and Elimination – Administers the response to, and investigation of reports of hazardous or potentially hazardous conditions; reviews recommendations and/or takes appropriate action to mitigate potential risks, • EHS Capability Building/ Training – Assists in development of EHS capabilities for all employees/ contractors through effective content development, delivery and comprehension of all applicable Site EHS training (to include taking on the majority of the 3rd party training), • Track and report safety KPI's and safety performance for their site, • All other job-related duties as assigned skills/qualifications required: • 5 + years' experience in manufacturing desired. General knowledge of site operations including Maintenance, Sanitation, Warehouse, Refrigeration, and Production. Must have solid track record for EHS, having served as a EHS representative or committee member is considered helpful, • Capable of obtaining OSHA 30-hr certification and First Aid/CPR/AED or higher certification is considered a plus, • Skilled in organizing resources and establishing priorities, able to meet critical deadlines and to maintain confidentiality of records and information, • Must be capable of working in a fast-paced environment with minimal direct supervision and have strong demonstrated leadership, interpersonal, and self-initiative skills, • Good technical understanding of EHS issues and their relationship to Operations/ Engineering and other job functions as it relates to building in prevention, • Proficiency in English: Comfortable with both written and verbal communication, including reading and writing. Demonstrated ability to influence across a diverse range of people from Corporate / Division leadership to a factory floor associate, • 12 hours sitting/standing/walking supporting the site teams shift schedule, • Ability to lift up to 50 lbs., • Reaching/bending requirements (if any) – less than 2 hours/day, • Exposure to hazards (machinery, confined spaces, etc.) – must utilize proper PPE in these environments food safety requirements:Notify supervision of any repairs or adjustments that are required that may affect product quality or food safety • Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas, • Perform all duties necessary to meet Company, Customer and/or Government requirements/standards as prioritized by the Company, • Ability to initiate action to prevent the occurrence of nonconformities relating to Food Safety and the Quality of the product, processes, quality system, or safety system, • Identify and record any problems relating to Food Safety and the Quality of the ingredients, processes, quality system, or safety system, • Control further processing or delivery of nonconforming products in terms of Food Safety and Quality issues until the deficiency or unsatisfactory condition has been corrected, • In the event of absence, another employee with the same skill level will assume the duties and responsibilities as required position location: Webster, NY reports to: Site Sr. EHS Manager travel requirements: minimal travel. Occasional off-site visits to other locations. Salary requirement: Non-Exempt *Base pay offered may vary depending on geography, job-related knowledge, skills, and experience. A full range of medical, financial, and/or other benefits, dependent on the position, is offered. Base pay range:$30—$36 USD fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email . For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.

Job DescriptionDescription: The health services that became the Anthony L Jordan Health Corporation (Jordan Health) began more than 100 years ago, in 1904. As one of the first 5 Federally Qualified Health Centers (FQHC) established in the nation, its roots are steeped in service to those who face barriers to health and health care, meeting their need for comprehensive medical, dentistry, behavioral health, and community services. Starting in northeast Rochester, NY, Jordan Health has since expanded to become a network of primary care offices and health centers serving residents living in three quadrants of Rochester, NY and in Canandaigua, N.Y. Jordan Health is now seeking a Risk Management Specialist who, under the guidance of the Chief Compliance & Risk Officer, is primarily responsible for managing the complex and multifaceted nature of risk within the Jordan Health Centers, by centralizing oversight and coordination of risk management activities. Support patient and staff safety by leading the identification, assessment, and mitigation of risk. Provides expertise, guidance, and support to ensure that proactive measures are in place to safeguard both patient and staff, while also fostering a culture of continuous improvement. If you want to apply your specialized experience and education in an environment where you can make a difference and significantly impact patients’ quality of life, please consider our Risk Management Specialist opportunity. Requirements: The Risk Management Specialist will ensure: · Risk identification and incident management · Proactive risk reduction and claims prevention · To manage and encourage ongoing education of Jordan Health staff · Jordan Health is in full compliance with applicable federal and state regulations and standards Education And Experience Required: · Bachelor’s degree in Health Care Sciences i.e. Healthcare Administration, Nursing (BSN), Public Health or Business Administration. · Minimum 1 year of experience in a healthcare setting, with responsibilities involving risk management, patient safety, quality improvement or compliance and regulatory affairs. Licenses And Certifications: · None Required. Special Skills, Knowledge Required: · In-depth understanding of risk identification, analysis, mitigation, and reporting, specifically within clinical environments. · Familiarity with healthcare regulations and standards, including HRSA, FTCA, HIPAA, OSHA, CMS, and The Joint Commission. · Knowledgeable in managing adverse events, near-misses, and unsafe conditions. Benefits: Jordan Health offers a competitive salary and full benefits offering including medical, dental, vision, life insurance, and 403b retirement plan. We offer Professional Development allowance. Jordan Health offers equal opportunities to all persons without regard to race, color religion, age, sex, disability, national origin, ancestry, citizenship, military or veteran status, marital status, sexual orientation, domestic violence victim status, predisposing genetic characteristics or genetic information, or any other status protected by law. About Jordan Health: Jordan Health is an independent FQHC, with Level III Patient-Centered Medical Home (PCMH) designation through the National Committee on Quality Assurance. Jordan Health receives funding from the Health Resources and Services Administration (HRSA) of the U.S. Department of Health and Human Services. Jordan Health is a network of outpatient primary care offices with providers who follow a panel of patients. While independent, Jordan Health actively collaborates with the major hospital and healthcare systems in our operating area to provide a total safety net of healthcare services.

Job Description This position will oversee LaBella’s Health and Safety program and corporate H&S staff to lead regulatory compliance, workplace safety, and driver safety. This position is tasked with ensuring a safe workplace by planning and executing safety practices utilizing preventive measures and training and education for employees as required by local laws, compliance and best practices in the industry. Key responsibilities include collaborating with leadership on health & safety strategy, ensuring compliance with federal, state, and local regulations, promoting a culture of safety, managing safety staffing and budget, and acting as a liaison with regulatory agencies and other stakeholders. Specific Duties/Responsibilities include but are not necessarily limited to the following: • Continued Program Development & Implementation Continue development, implementation, and management of LaBella’s comprehensive health and safety and driver safety programs and policies across the organization. Develop long-term business plans and oversee broad initiatives to ensure strategic goals are met. Provide proactive leadership and continued development of workplace safety culture managing all aspects of the safety and driver safety programs. Promote safety awareness amongst the employees and provide safety advice to top management. Lead internal team of safety professionals and coordinate closely with Fleet & Compliance Manager, Human Resources Dept., and Division Directors. Facilitate cross functional/cross divisional Safety Leadership Team and Safety Council to develop, implement, and monitor safety processes, policies, and procedures that support the overall health and safety strategy. • Risk Assessment & Mitigation Identify, assess, and mitigate health and safety hazards associated with processes, materials, and equipment. Interface with HR on workers compensation claims and communication with injured workers and return to work strategies. Review safety disciplinary actions for cause (root cause analysis) and provide recommendations for remedial/follow up actions. Lead management of employee H&S and driver records including but not limited to annual physicals, medical monitoring, driver qualification files, OSHA certificates, competent person certificates, and other related records • Regulatory Compliance Ensure the organization adheres to all applicable federal, state, and local health and safety and driver safety regulations, laws, and standards. Ensure completion of required recordkeeping and reporting for OSHA, ISNetworld, DOT, and other similar entities, as well as maintaining a database of industry files such as MSDS. • Incident Investigation Ensure investigations into incidents, accidents, and near misses to identify causes and develop preventative solutions occur according to approved processes and procedures. Periodically conduct and assign staff to conduct safety inspections and audits (including on job sites) to assess employee compliance with safety policies and regulations. Identify opportunities to minimize workplace injuries, accidents, and health problems and work to implement changes required. • Training & Culture Provide safety training to employees and foster a culture of safety and continuous improvement. Perform general safety incident trend monitoring and analyses. Work with stakeholders, Safety Leadership Team, and Safety Council to identify areas of improvement. • Stakeholder Liaison Communicate and collaborate with clients, subconsultants, subcontractors, insurance company, and regulatory agencies on health and safety matters. • Budget and Labor Management Develop, oversee, and manage the annual safety labor and operating budget. • Strategic Integration Integrate health and safety considerations into overall business operations and strategy. Requirements • Bachelor’s degree or higher in Environmental Health and Safety, Occupational Safety, Safety Management, or a related field., • At least ten years of corporate health and safety experience, including construction and driver safety, with at least 5 years’ experience in a leadership or management position., • Possess CSP (Certified Safety Professional) certification or be able to obtain certification within 6 months., • Possess extensive knowledge of relevant health and safety regulations, safety protocols, and risk management., • In-depth knowledge of OSHA and FMCSA standards and applicable regulatory requirements., • Strong leadership, team management, communication, collaboration, and interpersonal skills to influence behavior and drive initiatives., • Excellent written communication skills with the ability to independently compose clear reports and directive communications to management and employees., • Excellent verbal communication skills for both one-on-one conversations and for speaking before groups., • Strong skills in use of technology, including experience with a Learning Management System and Incident Management system., • Ability to conduct training., • Excellent organizational skills with attention to detail and follow-through., • Ability to travel., • Ability to work in a team environment and to communicate effectively with people at all levels within the organization., • Self-motivated to continuously seek ways to aid and improve health and safety processes., • Ability to multi-task., • An uncompromising ability to keep information confidential. Salary Range: $120,000 - $145,000 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. o Flexible Work Schedule o Health/Dental Insurance o 401k Plan with Employer Match o Short & Long Term Disability o Profit Sharing o Paid Time Off o Leadership Development Program o Fitness Reimbursement o Tuition Reimbursement o Referral Bonus Program o Wellness Program o Team Building Events o Community Service Events

Job DescriptionCome join our team of an established family owned HVAC Wholesale Distributor with three branches including Rochester NY. We are looking for an experienced service technician in the Rochester area, we offer a benefits package and PTO. Our candidate will need the following qualifications. Skills and Qualifications: • Technical knowledge of HVAC systems and components., • Strong problem-solving and troubleshooting skills., • Ability to diagnose and repair electrical and mechanical faults., • Familiarity with various HVAC equipment, including furnaces, air conditioners, and refrigeration systems., • Knowledge of building codes, safety regulations, and OSHA standards., • Good communication and interpersonal skills., • Physical ability to lift and carry equipment and tools., • Ability to work independently and as part of a team., • Strong customer service skills. 1wvoBWjIWz

Job DescriptionDescription: We have a great opportunity for the right person interested in sharing their talents and supervisory experience with our growing maintenance team. This full-time position will provide maintenance support and be responsible for coordinating persons and activities required in maintaining the physical operations and systems of the property, located in Rochester, NY. Candidates must have proven experience in multifamily or construction site maintenance. KEY RESPONSIBILITIES INCLUDE: • Schedule, coordinate, and monitor maintenance personnel and activities ensuring timely and effective completion of work, including routine resident service requests, preventative maintenance, emergency maintenance, capital improvement and replacements, tool and equipment maintenance, and seasonal maintenance., • Perform required maintenance and/or repairs to building systems and apartments (plumbing, carpentry, electrical, appliances, painting/drywall, HVAC, fire and security systems, elevators as applicable), utilizing standard maintenance equipment, power tools and hand tools., • Perform and monitor work necessary to prepare apartments for move in of future tenants., • Supervise daily activities performed by maintenance and grounds personnel. Be prepared to augment staff duties due to vacations, illness, etc., • Conduct all business in accordance with regulations of federal and state supervisory agencies, Fair Housing, Americans with Disabilities Act, OSHA, federal, state, local, and all other laws pertaining to multifamily housing and employees., • Ensure the quality and safety of the property, staff, and residents. OUR BENEFITS INCLUDE: • Medical, Dental and Vision benefits, • Life Insurance, • Short-Term Disability, • Long-Term Disability, • 401k Retirement Plan with Company Match, • Paid Time Off, • Paid Holidays Annually, • Employee Referral Program Landsman Development Corp. (LDC) was established in 1971 by its founder and initial shareholder, Elliott Landsman. Since its inception, the company has developed and invested in a wide variety of projects including industrial, commercial, office, retail, and multi-family residential, both subsidized and conventional. Most of the properties developed are owned by partnerships in which LDC has retained an interest as managing general partner or managing member. Mayzon Management Corporation was incorporated in 1972 to manage real estate developed by its parent company, Landsman Development Corp. The company name has evolved over the years, and the name has been changed to Landsman Real Estate Services, Inc. Landsman has grown to manage more than 2,400 rental units and over three million square feet of industrial, commercial and office space and has also become the property management company of choice for several third-party owners. Contact us now to learn more about this great opportunity! Requirements: Minimum Educational Requirements: • Minimum 3+ years multifamily or construction site management., • Must have excellent communication, interpersonal, customer service, organizational, time management, and verbal and written skills., • Must be able to communicate in English with residents, emergency providers and outside contractors. Bilingual Spanish-speaking a plus., • Must possess mechanical aptitude, skillful use of equipment and tools, and have physical and manual dexterity skills., • Must have computer proficiency in Microsoft Office and ability to navigate the Internet., • Required use of a cell phone., • Must be able to manage a flexible schedule including overtime and be on-call as needed., • Must be able to lift, move and transport up to 50lbs without the assistance of hand truck, dolly, or other mechanical lifting devices. Must be able to walk, bend, stoop, climb stairs, access and work in confined spaces as well as at heights in excess of 20 feet and have the mobility required to use ladders.

Job DescriptionRED-Rochester is a multi-utility generation plant and district energy supplier to one of the world’s most comprehensive industrial parks: the Eastman Business Park. Supporting a 1,200-acre campus, RED-Rochester has the utilities, infrastructure, technical services, support services, space and complementary regional resources to benefit a wide range of industry verticals. We are seeking a Utilities Mechanic – Rotating Machinery who enjoys the challenge of large scale, industrial machinery maintenance. Our infrastructure consists of a blend of classic and modern industrial assets and requires a person with broad industrial and utilities expertise – able to collaborate and work well with others; able to communicate professionally both up and down the organization; and able to work with other departments and contractors to achieve success. The Utilities Mechanic – Rotating Machinery is responsible for maintaining and repairing mechanical equipment essential to utility operations, with a primary focus on rotating machinery. The role is critical in ensuring the reliability and performance of systems that power Eastman Business Park’s extensive infrastructure. Essential Duties and Responsibilities • Install, troubleshoot, maintain, and repair rotating mechanical equipment, including:, • Pumps (centrifugal and positive displacement), • Motors, compressors, turbines, gearboxes, and blowers, • Steam and condensate system components, • Conduct preventive and predictive maintenance on rotating machinery, • Align, balance, and test equipment using tools such as dial indicators, laser alignment systems, and vibration analyzers, • Maintain detailed records of work performed using CMMS (Computerized Maintenance Management System), • Collaborate with engineers, operators, and other maintenance personnel to resolve equipment issues, • Adhere to all safety policies and procedures; participate in safety audits and toolbox talks, • Support equipment upgrades, turnarounds, and emergency response efforts, • Use of hoists, pulleys, dollies, rollers, trucks, overhead cranes and rigging, lathes, & shop equipment., • All sizes of Pumps from single stage low pressure centrifugal to multi-stage high-pressure (up to and beyond 2000PSI)., • Refrigeration Units – General Mechanic systems, Bearing and Seal work., • Steam Turbines (5-1400PSI) to drive all styles of utilities generation rotating equipment., • Equipment auxiliary systems such as: Lube oil lubrication, Hydraulic oil, Speed control & governing, Various cooling water and Storage systems. Education and/or Experience: * High school diploma/GED * 10 years of applicable utilities mechanic or millwork experience (or comparable Military Service experience within defined trade). * Trade school or technical certification in mechanical maintenance Qualifications or Licenses: • Must obtain required safety operator licenses, as needed for fork truck, man lift and scissor lift within 12 months (Employer Provided), • Immediately obtain OSHA 10hr certification., • Must obtain OSHA 30hr certification within 12 months., • Industrial environment/power plant/treatment plant atmosphere, • Working outside in all weather conditions from street level to roof tops., • Possibility of temperatures ranging from extreme cold to over 100 degrees., • Work will take place in chemical areas, noisy areas and areas that may be very dirty, • Aspects of your job may include possible exposure to Hazardous Materials, such as Asbestos, Lead paint, and other chemicals or waste products. All required PPE and safety training will be provided to eliminate associated risks.Physical Demands, • Ability to lift up to 50 lbs., • Work in confined spaces and at heights, • Stand, kneel, and crouch for extended periods, • Work outdoors in varying weather conditions

Job Description We are currently seeking an experienced Driller to support our environmental and geotechnical drilling programs in Rochester, New York. This full-time position requires experience with soil sampling, installation of various size groundwater monitoring and recovery wells, rock coring, air & mud rotary and geotechnical drilling. Additional responsibilities include routine maintenance and minor mechanical repairs of equipment. Duties • A minimum of 5 years of experience as lead driller on truck or track-mounted rotary drill rig, • Commercial Driver License (CDL) with clean driving record, • 40-hour HAZWOPER training required Requirements • OSHA 10-hour or 30-hour construction safety training are preferred but not required, • Ability to weld a plus, • Experience with operation of heavy equipment (e.g., excavator, bulldozer, etc.) a plus Salary Range: $30.00 - $40.00 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. o Flexible Work Schedule o Health/Dental Insurance o 401k Plan with Employer Match o Short & Long Term Disability o Profit Sharing o Paid Time Off o Leadership Development Program o Fitness Reimbursement o Tuition Reimbursement o Referral Bonus Program o Wellness Program o Team Building Events o Community Service Events