Software engineer jobs in Pomona, CaliforniaCreate job alerts

Job Description This position is responsible for performing in-process, component and finished goods visual and dimensional inspections using SPC/AQL sampling plans to support production, incoming receiving inspection and Quality investigations as needed. These inspections utilize industry standard metrology and gaging methods to identify defects and ensure product meets customer requirements. This position works on the production floor sampling, performing visual inspections and assessing quality of the parts and process. Attention to detail and the ability to work with minimal amount of supervision and understanding of quality inspection tools and equipment is required. Essential Job Functions and Responsibilities: • Perform dimensional and visual In-process and finished good inspection on parts/boxes per approved control plans, test methods and customer drawings., • Quality / SPC evaluation when required per site documentation., • Communicate with Machine Technicians, Operators and Production Supervisors inspections/SPC results to operation when defects are detected to ensure process adjustments are made and in an effort to run a consistent quality product., • Review daily NCR reports, SPC charts and quality system documentation., • Enforce and maintain our Quality System and provide suggestions to maintain our continuous improvement system., • Visually and dimensionally evaluate product and packaging in accordance with established acceptance criteria and standards., • Follow all Safety rules and guidelines. Report any unsafe condition or practice., • Maintain a clean work area throughout the shift., • Evaluate product documentation for adequacy and completeness., • Visually and dimensionally evaluate product and packaging in accordance with established acceptance criteria and standards., • Measure process performance against established acceptance criteria and standards., • Record real time data and prepare formal reports., • Other assignments as may be given by the Quality Engineer or Managers., • Support maintenance and calibration requirements for Quality Lab and production floor, • Place non-conforming product on hold and create non-conforming records and assist with Quality inspections of rework product as needed., • Partner with Quality Control department for the management of product retains., • Update Quality Inspection requirements, • Assist in the creation, closure review and verification of completion of batch records and release products and issuance of certificates of compliance to ensure product produced meet the customer and regulatory requirements, • Assist with New Product validation as required., • Participate in Gage Repeatability and Reproducibility (GR&R), Geometric Dimensioning and Tolerancing (GD&T or GD and T) Intermedium studies and product/process validations, • Review and release product for shipping though issuance of COC ensuring all Customer requested documents are provided at the time of shipment, • Maintain cleanliness of QC lab, implement and sustain 6S, Quality boards and speak to status of site Quality metrics, • Able to generate and reconcile Labels (as needed), • Perform Environmental monitoring activities according to site procedures. Train Quality personal on environmental monitoring activities and clean room requirements., • Statistical Process Control Knowledge, • Cosmetic, visual and dimensional Inspection, • Housekeeping, • General Safety, • Communication & Teamwork Skills, • Computer literate. Good verbal and written communication skills., • Ability to perform standard measurement and test equipment., • Attendance-dependability, • Time Management, • IQMS Knowledge, • Inspection Skills, • Organizational Skills, • Basic math skills, • Metrology, • Blueprint Reading, • Read and write in the English language., • Must be able to perform basic math such as addition, subtraction, multiplication, division, fractions, and decimals., • Ability to read and interpret basic engineering drawings and product specifications., • Proficiency with utilizing ANSI Sampling Plans, • Proficient in utilizing hand measurement tools (Caliper, Micrometer, Ruler, Gage Blocks, etc.), • Experience with PCDMIS and Measuremind 3D automated inspection software usage (CMM, OGP, Smart scope, etc.) and programming a plus, • Knowledge of Medical device standards and Regulations (ISO 13485), • Ability to read and decipher blueprints, • Knowledge of GD&T, • Experience with handling non-conforming material, • Experience with device history record creation and review, • Knowledge of ERP and quality system elements, • Proficiency in using Microsoft Excel, Access Database and Word, • Experience in supporting process validation activities including testing and Gage R&R, • Knowledge of sample plans creation is a plus, • High School Diploma or GED., • Minimum 6 months factory related experience in a regulated industry., • Minimum of one year experience in visual and dimensional evaluation of molded products; or minimum three years experience in plastic injection molding and assembly processes, • Experience with calipers and micrometers is required; Other inspection equipment such as indicators, height gage, & pin gauges are a plus., • Should have prior experience in a manufacturing environment to understand normal safety requirements., • Certified Quality Inspector or Technician a plus

Job Description Transmission Project Development Senior Engineer 1 Summary The Transmission Project Development Senior Engineer 1 is responsible for sponsoring technical and engineering efforts in support of transmission utility projects. This role involves developing project scope, schedules, and costs while identifying synergies and cross-cutting opportunities to maximize value. The position requires coordinating and performing technical analyses for transmission-level projects and driving multiple aspects during licensing and construction to streamline and optimize resources. Responsibilities * Oversee engineers performing diagnostics, equipment monitoring, inspections, and grid technology reviews. * Build relationships to facilitate cross-functional knowledge transfer across work groups. * Lead the preparation of technical reports, presentations, and other documentation to communicate project status, findings, and recommendations. * Collaborate with cross-functional teams to ensure effective development, integration, and implementation of technologies and asset management strategies. * Support new equipment installation and startup, leading handover processes to ramp-up and sustaining phases. * Provide guidance to junior engineers in investigating threats to distribution system infrastructure. * Gather and correlate data using engineering studies and procedures, including routine and diagnostic testing of components and systems. * Facilitate training and professional development opportunities for engineering team members. * Ensure compliance with standards of conduct and integrity when handling sensitive, financial, and cybersecurity-related information. Minimum Qualifications * Bachelors degree in Engineering or a scientific/technical/math field. * Seven or more years of experience performing engineering work in operations, production, construction, or maintenance environments. * Valid Class C Drivers License. Preferred Qualifications * Experience supporting testimony development for regulatory proceedings and environmental licensing. * Engineering experience with modeling and performing power system analyses on transmission systems (50 kV to 500 kV). * Experience with +50 kV substation and transmission line design, with emphasis on transmission lines. * Proficiency in GE PSLF, PowerWorld simulation software, PLS-CADD, and/or SPIDA. * Professional Engineer (PE) license or equivalent certification.

Job Description PDS 9 / Power Delivery Substation This position is not eligible for recruiting or sourcing by outside parties. Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. We’ve got the power to energize your career and spark YOUR work/life balance through professional development and exceptional benefits. Don’t delay, plug in today for an inclusive and meaningful career. Mesa Associates Inc. is a woman/minority-owned full service engineering, procurement, & construction management firm covering power, defense, aerospace, industrial, commercial and municipal entities. We specialize in power generation and delivery services including electrical high-voltage, substations, switchyard, transmission line, & distribution design. We have been in the top 10 of EC&M's Top 40 Electrical Design Firms since 2012. With over 1,000 associates, we are big enough to perform, but small enough to care! This is a virtual position in the United States where you will work from your personal residence in a distraction free space. We are currently hiring/performing work in: any US state. Mesa seeks a senior level substation design engineer with at least 15 years of recent and progressively responsible experience performing substation design and/or QA/QC including but not limited to: • Development of general arrangement, equipment plans, elevations, sections, control house layouts, grounding design, conduit and cable design, creation of bills of materials, and cable schedules utilizing Microsoft Office and AutoCAD software., • Perform electrical physical design for substations ranging from 4kV to 500kV., • Work in a project team environment with engineers and other designers involved in high and extra-high voltage substations., • Interpret and incorporate vendor information into design deliverables., • Properly apply client's substation design standards to the work., • High level understanding of SCE and Industry Standards., • Work with the QA/QC team to perform independent quality checks primarily on Physical Design Drawings, however P&C drawing reviews may also be required., • Capable of coaching and mentoring Design Engineers while providing constructive feedback on design errors., • Capable of preparing and verifying calculations using engineering formulas and skills or application specific software as required., • Manages personal task assignments, and for designated team members to ensure adherence to scope, schedule and budget., • Monitors project execution milestones and schedules to ensure projects are completed on schedule., • Performs technical and coordination checking/ review of deliverables and other project or study documents., • Use good verbal and written communication skills with team members and clients, • Use good interpersonal skills to build relationships with team members and clients, • Accept responsibility for technical adequacy of deliverables designed or checked Benefits: • Paid Time Off, • Holiday Pay – 10 Annually, • Group Medical/Dental Insurance, • Life Insurance (Company Paid), • Disability Insurance (Company Paid), • 401(K) Retirement Savings Plan, • 401(K) Matching Contribution, • Section 125 / Cafeteria Plan, • Long Term Care Insurance, • Tuition Reimbursement, • Fitness Center Reimbursement, • Annual Performance Bonus, • 9/80 Work Schedule Annual Salary Range: $95,680 - $170,560 The expected compensation is a range determined by factors including but not limited to education, experience, and qualifications of the candidate, internal equity, work location, and hiring department’s fiscal resources. Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Job Description PDS 9 / Power Delivery Substation This position is not eligible for recruiting or sourcing by outside parties. Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. We’ve got the power to energize your career and spark YOUR work/life balance through professional development and exceptional benefits. Don’t delay, plug in today for an inclusive and meaningful career. Mesa Associates Inc. is a woman/minority-owned full service engineering, procurement, & construction management firm covering power, defense, aerospace, industrial, commercial and municipal entities. We specialize in power generation and delivery services including electrical high-voltage, substations, switchyard, transmission line, & distribution design. We have been in the top 10 of EC&M's Top 40 Electrical Design Firms since 2012. With over 1,000 associates, we are big enough to perform, but small enough to care! This is a virtual position in the United States where you will work from your personal residence in a distraction free space. We are currently hiring/performing work in: any US state. Mesa seeks a senior level substation design engineer with at least 15 years of recent and progressively responsible experience performing substation design and/or QA/QC including but not limited to: • Development of single lines, elementaries, panel elevations, and wiring diagrams, creation of bills of materials, and cable schedules utilizing Microsoft Office and AutoCAD software., • Perform electrical P&C design for substations ranging from 4kV to 500kV., • Work in a project team environment with engineers and other designers involved in high and extra-high voltage substations., • Interpret and incorporate vendor information into design deliverables., • Properly apply client's substation design standards to the work., • High level understanding of SCE and Industry Standards., • Work with the QA/QC team to perform independent quality checks primarily on P&C drawings, however physical design drawing reviews may also be required., • Capable of coaching and mentoring Design Engineers while providing constructive feedback on design errors., • Capable of preparing and verifying calculations using engineering formulas and skills or application specific software as required., • Manages personal task assignments, and for designated team members to ensure adherence to scope, schedule and budget., • Monitors project execution milestones and schedules to ensure projects are completed on schedule., • Performs technical and coordination checking/ review of deliverables and other project or study documents., • Use strong verbal and written communication skills with team members and clients, • Use good interpersonal skills to build relationships with team members and clients, • Accept responsibility for technical adequacy of deliverables designed or checked Benefits: • Paid Time Off, • Holiday Pay – 10 Annually, • Group Medical/Dental Insurance, • Life Insurance (Company Paid), • Disability Insurance (Company Paid), • 401(K) Retirement Savings Plan, • 401(K) Matching Contribution, • Section 125 / Cafeteria Plan, • Long Term Care Insurance, • Tuition Reimbursement, • Fitness Center Reimbursement, • Annual Performance Bonus, • 9/80 Work Schedule Annual Salary Range: $95,680 - $170,560 The expected compensation is a range determined by factors including but not limited to education, experience, and qualifications of the candidate, internal equity, work location, and hiring department’s fiscal resources. Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Job Description Maintain a pristine, elevated, and consistent aesthetic and functional standard across all 30 studios, ensuring the client experience reflects the NAKEDᴹᴰ brand at every touchpoint. The Maintenance Supervisor (Branding & Aesthetic Engineer) is the guardian of the NAKEDᴹᴰ studio experience. This role requires a unique mix of technical skill, creative problem-solving, and brand loyalty. Candidates must be willing to travel • Aesthetic Oversight, • Weekly visual walkthroughs (in-person or via local manager photo/video submissions)., • Check decor, plants, signage, lighting, furniture arrangement, wall paint, mirrors, and uniform displays for brand consistency., • Ensure seasonal displays (if any) are on-brand., • Replace worn or damaged items immediately (pillows, rugs, chairs, etc.)., • Functionality & Equipment, • Verify all treatment equipment is functioning properly., • Confirm storage areas are organized and stocked for quick access., • Test lighting controls, music systems, and HVAC., • Report and coordinate repair or replacement for malfunctioning items., • Brand Standards Compliance, • Use the NAKEDᴹᴰ Aesthetic & Experience Checklist (custom doc we’ll make)., • Confirm each studio matches corporate-approved layouts, colors, scents, and background music., • Conduct quarterly “surprise checks” to catch details that may get overlooked., • Preventative Maintenance, • Schedule routine deep cleans with contracted cleaning teams., • Perform minor touch-up painting personally (walls, trim, cabinetry, etc.) to maintain a flawless studio appearance., • Maintain a replacement cycle for plants, linens, and high-touch items., • Vendor Coordination, • Coordinate and schedule cleaning, repair, delivery, and other 3rd party vendor services as needed., • Coordinate, schedule and maintain recurring services, pick-ups and deliveries for all studios., • Conduct routine inspections and surprise visits to maintain high standards., • Coordinate with Studio Managers to address and prevent maintenance issues., • Manage vendor relationships for cleaning, repairs, technical services, and supplies., • Oversee recurring maintenance cycles (laundry, cleaning, paint, sharps pickups, water delivery, equipment upkeep)., • Track all replacements, repairs, and vendor services in a centralized log., • Ensure every detail - from scent diffusers and tech devices to pillowcases and alcohol dispensers - meets our company standards., • Maintain visual consistency across all studios (luxury minimal aesthetic)., • Ensure studios maintain operational functionality for maximum staff efficiency., • Basic to intermediate knowledge of electrical, plumbing, and HVAC troubleshooting., • Hands-on skills in touch-up painting, wall/trim repair, small carpentry, and furniture fixes., • Understanding of paint finishes, flooring care, and furniture maintenance to preserve a luxury aesthetic., • Familiarity with scent, lighting, and audio systems to maintain the brand ambiance., • Ability to track and manage inventory of high-touch items (linens, plants, décor, disposables)., • Experience coordinating with contractors and third-party vendors for larger-scale projects or specialized services., • Proficiency with File Sharing and reporting software (i.e. Excel, Google Sheets, Dropbox...)., • Strong eye for detail with a commitment to brand consistency and luxury minimalism., • Proactive problem solver with the ability to anticipate and prevent issues before they escalate., • Strong communication skills for working with Studio Managers and corporate leadership., • Ability to lift and move equipment/furniture when needed., • Comfortable with frequent travel between studios (approximately 50–70%)., • Prior experience in hospitality, retail, or luxury brand environments preferred., • Basic IT troubleshooting (Wi-Fi, music systems, tablets, and other studio devices) a plus.

Job Description Innovate. Automate. Transform. Rebel Convenience Stores is seeking a Data Automation Engineer to join our IT team at our Upland, CA corporate office. This role is responsible for designing, developing, and maintaining integrations and automations across enterprise systems to improve efficiency, scalability, and business performance. If you thrive in building seamless data flows and innovative solutions that make processes smarter, we’d love to meet you. What You’ll Do • Build and maintain data pipelines, APIs, and middleware to connect enterprise systems., • Design and manage ETL processes for smooth data integration., • Automate workflows and system tasks with software automation tools and scripts., • Develop, test, and maintain RESTful and SOAP APIs for secure, scalable integrations., • Monitor system and integration performance, identify bottlenecks, and optimize workflows., • Ensure integrations align with security standards and compliance requirements., • Design solutions for cloud, hybrid, and on-premise environments., • Bachelor’s degree in Computer Science, Software Engineering, Information Systems or equivalent experience., • 3+ years of hands-on experience in systems integration, data automation, or data engineering., • Proficiency with ETL tools, data transformation techniques, and scripting/programming (Python, JavaScript, SQL)., • Strong experience with APIs, REST/SOAP web services, and enterprise application integrations (ERP, CRM, HRIS, etc.)., • Familiarity with authentication standards (OAuth, SAML, JWT) and security best practices., • Problem-solving mindset, with strong analytical and technical skills., • Work on impactful projects that directly improve business operations and scalability., • Competitive compensation and performance-based growth opportunities., • Comprehensive benefits package (health, dental, vision, retirement plans)., • Be part of an innovative IT team driving technology transformation.

Job Description PDS 9 / Power Delivery Substation This position is not eligible for recruiting or sourcing by outside parties. Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. We’ve got the power to energize your career and spark YOUR work/life balance through professional development and exceptional benefits. Don’t delay, plug in today for an inclusive and meaningful career. Mesa Associates, Inc. is a woman/minority-owned full-service engineering, procurement, & construction management firm covering power, defense, aerospace, industrial, commercial and municipal entities. We specialize in power generation and delivery services including electrical high-voltage, substations, switchyard, transmission line, & distribution design. We have been in the top 10 of EC&M's Top 40 Electrical Design Firms since 2012. With over 1,000 associates, we are big enough to perform, but small enough to care! Mesa seeks a Substation Project Engineer whose primary functions are to scope, plan, manage, and coordinate substation projects with the objective of delivering successful projects by ensuring that project goals and objectives are achieved while all business processes and applicable procedures are followed. The position requires a working knowledge of power industry design and construction practices, standards, and processes as well as the use of independent judgment, and enhanced verbal and written communication skills. The ideal candidate would have a Bachelor’s degree in Engineering from an accredited curriculum, and a minimum of five years of relevant project experience. Education/Experience/Certifications: • BS in Engineering from an ABET accredited college/university, • 5 - 10 years experience, • Ability to perform broad range of project supervisory responsibilities over others, • Possess solid verbal and written communications skills. Ability to coordinate with and interface with contractors, vendors, engineers, colleagues, and other electric utilities personnel at a high professional level, • Ability to perform project related quality reviews, • Display strong interpersonal skills to build relationships and work effectively with clients, peers, and affiliates, • Strong capability in Microsoft Word, Excel, scheduling software and possess working knowledge of corporate accounting practices and business operations, • Willingness to develop, promote and comply with Mesa and client safety requirements, • Paid Time Off, • Holiday Pay – 10 Annually, • Group Medical/Dental Insurance, • Life Insurance (Company Paid), • Disability Insurance (Company Paid), • 401(K) Retirement Savings Plan, • 401(K) Matching Contribution, • Section 125 / Cafeteria Plan, • Long Term Care Insurance, • Tuition Reimbursement, • Fitness Center Reimbursement, • Annual Performance Bonus $123,120 - $158,754 The expected compensation is a range determined by factors including but not limited to education, experience, and qualifications of the candidate, internal equity, work location, and hiring department’s fiscal resources. Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Job Description At Essel, we are a leading environmental services company dedicated to creating sustainable solutions for our clients. We are currently seeking a skilled and experienced Senior Civil Engineer to support our client with water infrastructure utilities. You will have the opportunity to make a significant impact on various projects that focus on environmental conservation and sustainable development. As a Senior Civil Engineer, you will be responsible for designing, planning, and overseeing projects withinwater infrastructure specifically overseeing the design team in the preparation of plans and specifications for drinking water capital improvement projects. You will collaborate with a highly motivated team of engineers and professionals to develop innovative solutions that minimize the impact on natural resources and promote long-term sustainability. Job Functions: • Lead a design team to perform or manage multiple potable water supply, treatment, storage, and distribution design projects. Prepares design plans and specifications, • Plans, directs, assigns, reviews, and evaluates the work of all assigned staff. This includes preparing performance evaluations and career development profiles for all direct reports, as necessary, • Prioritizes assigned design projects within the area of responsibility. Monitors and reports on design project schedules and budgets, and implements corrective actions when needed, • Ensures design team meets design schedules and budgets for all assigned water supply and distribution design projects, • Performs QA/QC on design projects by other engineers and consultants, • Performs engineering design services associated with the development of Capital Improvement Programs and related design documents such as preliminary design reports, project cost estimates, cost/benefit analysis, value engineering reviews, and various evaluations and reports concerning system hydraulics, water supply, distribution, storage, treatment and water quality projects, • Performs engineering design services and/or supervision of design services associated with new business projects Responsibilities: • Designing and developing infrastructure projects, • Conducting site investigations and surveys to gather project data and assess environmental impact, • Preparing detailed engineering plans, specifications, and cost estimates for projects, • Performing structural analysis and calculations to ensure the strength and stability of structures, • Collaborating with other engineers and professionals to ensure project objectives are met, • Conducting regular inspections and assessments to identify and address potential risks or issues, • Bachelor's degree in Civil Engineering or a related field, • Professional Engineer (PE) license REQUIRED, • Minimum of 5 years of experience in civil engineering, preferably in water, • Proficient in AutoCAD and other relevant design software, • Extensive familiarity with environmental regulations and permitting procedures, • Excellent problem-solving and decision-making skills, • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off, • Professional development assistance, • Retirement plan, • Vision insurance

Job DescriptionCivil Project Engineer – Land DevelopmentCompany: SITETECH Inc. About UsSITETECH Inc. is a civil engineering, land surveying, and land development consulting firm with over 35 years of experience. We specialize in delivering innovative solutions tailored to our clients' needs, from tentative planning to final engineering. Our collaborative and dynamic work environment fosters creativity, professional growth, and efficiency in tackling diverse projects. Position OverviewWe are seeking a skilled Civil Project Engineer with expertise in land development to join our team. The ideal candidate will have a strong background in civil engineering principles and experience managing land development projects from conception to completion. This position offers a casual work environment, flexible hours, and occasional remote work opportunities. Responsibilities • Design and develop land development projects, including site layout, grading, drainage, utilities, and roadway design., • Perform feasibility studies, site investigations, and environmental assessments., • Prepare engineering plans, specifications, and cost estimates., • Conduct hydraulic calculations and design stormwater management systems., • Coordinate with clients, regulatory agencies, and stakeholders to ensure project compliance and success., • Manage project schedules, budgets, and resources effectively., • Offer creative and efficient solutions to engineering challenges.Qualifications, • Proficiency in AutoCAD Civil 3D and related design software., • Experience in land development projects., • Strong written and verbal communication skills., • Excellent organizational and time management skills., • Ability to work both independently and collaboratively in a team environment., • Competitive salary commensurate with experience., • Comprehensive benefits package, including health insurance, retirement plans, and paid time off.

Job Description Subtransmission System Planning Engineering Manager Summary The Subtransmission System Planning Engineering Manager leads a team of engineers responsible for establishing the future needs of the subtransmission system by analyzing the impacts of new customer load and generation. This role focuses on driving strategic planning, system innovation, and operational excellence to ensure a safe, reliable, and sustainable grid for the future. Responsibilities * Lead engineering and business initiatives to develop grid strategies that influence how the grid is planned, designed, operated, and maintained. * Develop and maintain a project portfolio management system to prioritize projects, allocate resources, and monitor performance. * Evaluate new technologies and methodologies to enhance efficiency, cost-effectiveness, and sustainability; design and implement improvement projects and new systems. * Establish and maintain relationships with external partners, vendors, and contractors to support project delivery and innovation. * Coach engineering teams on professional development opportunities to build technical expertise and leadership capacity. * Direct the development and implementation of comprehensive strategies, technologies, and safety programs that support long-term system advancement and employee well-being. * Manage engineering teams providing emergent and routine troubleshooting support for technical needs, ensuring quality, consistency, and cost control across projects. * Oversee the design and implementation of new equipment and cost-effective modifications to improve safety, reliability, and throughput. * Translate organizational goals into actionable objectives by setting team goals and assigning responsibilities accordingly. * Ensure the protection of physical, financial, and cybersecurity assets, and uphold the highest standards in handling sensitive and confidential information. Minimum Qualifications * Five or more years of combined experience performing or supervising engineering work in operations, production, construction, or maintenance environments. Preferred Qualifications * Experience leading employee performance and development, including coaching, mentoring, and performance evaluations. * Degree in Engineering or another STEM field. * Experience with regulatory policies (FERC/CPUC) and ability to integrate technical analysis with tariffs and stakeholder impacts to solve complex challenges. * Proficiency with power system analysis tools such as PSLF, PSCAD, EMS, CYME, CAPE, MDI, or similar software. * Five or more years as an Engineer or Power System Planner in an electric utility with experience in transmission, subtransmission, and/or distribution system modeling or planning. * Strong communication, presentation, and writing skills, with the ability to simplify complex technical issues for varied audiences. * Proven ability to collaborate effectively across teams, stakeholders, and all levels of management to develop solutions and secure alignment.

Job Description We’ve got the power to energize Your career and spark YOUR Work/Life Balance through professional development and exceptional benefits. Don’t delay, plug in today for an inclusive meaningful career in power, distribution, transmission, engineering, design, technology, or innovation at Mesa Associates, Inc. This position is not eligible for recruiting or sourcing by outside parties. Mesa seeks a motivated Electrical Substation Project Manager to manage P&C and Physical Design teams who are working on a growing customer's project portfolio. Responsibilities include communicating with our client's project managers and working with Mesa's project team to deliver outstanding customer service and high-quality substation designs. Required abilities for Electrical Substation Project Manager: • Mature knowledge of medium through extra high voltage substations' protection & control systems and physical design layout requirements., • Demonstrate leadership in developing and supporting Mesa's and our customers' safety programs., • Strong verbal and written communications skills and the ability to coordinate with and interface with clients, vendors, engineers, colleagues, and other electric utilities personnel., • Strong interpersonal skills with the ability to build relationships and work effectively with clients, peers, and affiliates., • Capable of understanding and implementing new processes/procedures with regards to Project and Program management., • Knowledgeable on the Project Management Institute’s (PMI’s) standard for Organizational Project Management (OPM)., • Proficiency in Microsoft Office, scheduling software and the ability to work with corporate accounting practices and business operations., • Experience with electrical utility equipment, systems, and project/programs IS required. Responsibilities of Electrical Substation Project Manager: • Manage electrical substation projects throughout their design lifecycle, • Manage multiple projects of various complexity concurrently, • Conduct meetings/calls with project stakeholders, build consensus and resolution to challenges discussed, manage the assignment, follow-up, and completion, of meeting action items, • Manage the project planning process to ensure each project’s outcome meets customer’s objectives, • Communicate project milestone requirements with all key stakeholders upon receipt of customer’s approval to proceed, • Attend customer job walks and provide technical/project support to customer’s Responsible Engineer, • Complete job walk checklist and review/contribute to meeting minutes. Review project SOW and identify any site constraints/conditions which may impact project feasibility. Provide recommendations to customer project team where reduction in costs or schedule length may be achieved, • Identify project risks, create a project risk register and apply project risk management and mitigation techniques, • Develop and submit a project estimate to customer within timeframe allotted by customer, • Develop a project execution plan and determine the resources necessary to ensure successful project completion, • Work with group leads to manage design and engineering resources, • Conduct Project Kick-off meetings with all project stakeholders and share project baselines which will be used to monitor and control the project’s KPI’s, • Maintain a project log and project status reporting system database to capture communications, milestone reviews, key project data, and change orders, • Monitor and control projects to ensure project meets customer’s SOW and prevent scope creep, • Monitor project execution for changes that may impact schedule and budget performance of project, • Communicate all project changes with customer and project team in a timely fashion to permit evaluation of alternatives to minimize schedule and budget impacts and update project execution plan, • Monitor and control Project Quality. Ensure QAQC activities are completed on time and all deliverables meet customer’s requirements at each milestone/stage gate, • Monitor project metrics and provide appropriate feedback to stakeholders to maintain project performance per the project plan, • Manage internal change order processes to meet Mesa’s and our customer’s requirements, • Monitor project budgets and financial reports on a weekly/bi-weekly basis analyzing Planned Value, Earned Value, and Schedule/Cost Variance. Provide team with Schedule Performance Index (SPI) and Cost Performance Index (CPI) data on a regular basis, • Respond to RFI’s and ensure customer receives accurate and timely information regarding project inquires, • Initiate RFI’s and facilitate necessary discussions to resolve any gaps in knowledge, • Close out projects in a timely fashion, complete all necessary customer reports/documentation, • Conduct a project close-out meeting with project stakeholders to capture and record all Lessons Learned BENEFITS: Paid Time Off Holiday Pay – 10 Annually Group Medical/Dental Insurance Life Insurance (Company Paid) Disability Insurance (Company Paid) 401(K) Retirement Savings Plan 401(K) Matching Contribution Section 125 / Cafeteria Plan Long Term Care Insurance Tuition Reimbursement Fitness Center Reimbursement Annual Performance Bonus 9/80 Work Schedule ANNUAL SALARY RANGE: $120,000 to $155,000. The expected compensation is a range determined by factors including but not limited to education, experience, and qualifications of the candidate, internal equity, work location, and hiring department’s fiscal resources. Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Job Description Key Responsibilities: Project Budget Management: • Develop and maintain project budgets, baselines, short- and long-term forecasts, and expenditure plans for assigned major and/or multi-year projects and programs., • Prepare routine and complex reports to assist Project Managers and OU partners in monitoring, managing, and forecasting costs (e.g., budget, actual, commitment, contingency, earned value, cost per unit, cost impact analysis)., • Create and maintain a risk register., • Perform complex and detailed research, updates, and data gathering/analysis in areas of cost controls (e.g., budget, actual, commitment, contingency, earned value, cost per unit, cost impact analysis)., • Support change control and contract negotiation/claim management processes., • Prepare project controls data request responses and work papers to support corporate/OU governance, internal/external audits, General Rate Cases, and regulatory filings. Requirements Work Experience: • Seven or more years of experience in cost controls/management., • Demonstrated experience in Project Management, Project Controls, and/or Construction Management, or equivalent experience. Utility construction/CA regulated/regulatory/EPC experience is desirable., • Demonstrated knowledge and experience in contract negotiation/management, handling/reviewing claims, and processing/managing change orders., • Demonstrated experience with Microsoft software (e.g., Word, Excel, PowerPoint, and Visio) and SAP or similar Enterprise Resource Solutions application., • Excellent Excel Skills and the ability to use advance Excel functions., • Effective communicator; able to speak with many different levels of management., • Able to work independently in meetings., • Experience with SAP is preferred., • Transmission or utility experience is preferred. Interested candidates are invited to submit their resumes to for consideration. Please include "Project Control Engineer" in the subject line of your email. PM2CM is an equal opportunity employer and welcomes applications from candidates of all backgrounds. Note: The above job description is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities, or requirements. Employees may be required to perform other job-related tasks as requested by their supervisor.

Job Description We have an immediate opportunity for an Electrical Engineer which has thorough knowledge and experience with regulations, guides, standard, codes, methods working with Transmission and Distribution engineering principles. This position requires strong analytical and problem-solving skills. Duties and Responsibilities • Responsible for gathering and evaluating line data of transmission, sub-transmission, distribution systems, transformer test data, and generator data. Utilizing Modell systems on appropriate software tool, such as CAPE., • Experience performing short circuit studies while protecting coordinated studies necessary for completing relay settings, perform relay settings, prepare protection summary and coordinating relay settings with neighboring utilities and other authorities required assignments meeting WECC and NERC PRC compliance., • Responsible for issuing Substation Relays and field Auto Recloser settings (GE, SEL and Electromagnetic) through ASPEN relay database to field., • Support Test technicians in-servicing or commissioning relay settings. Support and communicate with Test technician for making revisions/changes to relay settings as required., • Experience performing system studies provide protection requirements by design., • Responsible for designing protective relay systems to ensure the safety and reliability of the grid by reviewing AC/DC/Logic drawings., • Will be responsible for reviewing and signing off one-line, elementary logic diagrams and work with all other engineers supporting this department., • Develop and peer-reviewed protective relay setting for systems ranging from 12kV to 765kV, demonstrating deep technical knowledge across a wide voltage spectrum., • Previously led and executed short circuit studies and designed step distance and pilot protection schemes for 44-100kV lines, ensuring system reliability and compliance with FAC-008/NERC/IEEE/ICE/ANSI standards. Education and Experience • Bachelor’s or Master’s in Electrical Engineering., • 4 years plus of engineeringt experience related to Transmission, Distribution, and Substation., • PE desired, not required., • Working knowledge of transmission systems operation (line-and-bus arrangements, reclosing practices)., • Knowledge of digital logic design principles (logic, gates, latches) and experience in developing logic diagrams., • Experience and knowledge of System One-Line Diagram and relay and AC and DC Schematics as well as AC and DC wiring standards., • Experience in developing relay settings and familiarity with Relay setting software (GE EnerVista UR Setup, SEL AcSELerator)., • Clear understanding and knowledge of NERC PRC Compliances (PRO 23,27,26)., • Ability and experience to interpret/apply/design electrical one-line, elementary, protection logic diagrams., • Demonstrated experience in developing logic diagrams, programming relay setting and preparing setting document for Test technician and support them for in-serving relays for bulk power., • Proven experience with Computer Aided protection Engineering Software (CAPE), CYME, ASPEN relay database or Blue Beam Software., • Experience interpreting/applying, designing electrical one-line elementary, protection logic diagrams., • Experience in performing system studies, symmetrical component analysis, fault calculation, and set Electromechanical Relays, SEL and GE microprocessor relays using accelerator and URPC software., • Proficient with Microsoft Word, Excel, PowerPoint, Access, Visio, and Project., • Ability to demonstrate effective resource and project planning, decision making and ability to stay current with relevant technology and innovation. Compensation based on experience (Electrical Engineer, Transmission, Distribution, NERC, CAPE, Substations, Protection, Relays, Substation) Company DescriptionAbout us: 347 Group, Inc. provides staffing resources to a variety of industries. We have an experienced team of staffing professionals and provide a wide range of services to our clients. Visit our website us:\r\n\r\n347 Group, Inc. provides staffing resources to a variety of industries. We have an experienced team of staffing professionals and provide a wide range of services to our clients. Visit our website .

Job DescriptionSenior Civil Engineer Senior Civil Engineer Position Overview The Senior Civil Engineer will lead and manage traffic engineering projects from conception through completion, ensuring compliance with industry standards, government regulations, and client specifications. This role is crucial in delivering high-quality engineering solutions that enhance infrastructure and community development. Key Responsibilities • Lead the design and execution of civil engineering projects, including transportation, land development, and municipal construction., • Collaborate with multidisciplinary teams to develop project plans, specifications, and estimates., • Conduct site assessments and surveys to gather data for project development., • Ensure compliance with local, state, and federal regulations and codes., • Review and approve project designs and documentation to ensure quality and adherence to standards., • Manage project schedules, budgets, and resources, ensuring timely completion of deliverables., • Bachelor's degree in Civil Engineering or a related field, • Professional Engineer (P.E.) license is required., • Minimum of 5-7 years of experience in civil engineering, with a focus on traffic, transportation, land development, or municipal projects., • Proficiency in AutoCAD and Civil 3D software for design and drafting., • Strong knowledge of civil engineering principles, practices, and relevant local, state, and federal regulations. Company and performance bonus plan * 401K with match * Health, Vision, Dental Insurance * Life Insurance * Hybrid remote work schedule * Paid time off * Floating Holiday * Paid holidays * Great work environment with high employee tenure * Career growth and development opportunities • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. CyberCoders will consider for Employment in the City of Los Angeles qualified Applicants with Criminal Histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring (Ban the Box) Ordinance.This job was first posted by CyberCoders on 02/03/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description About Us: Cubic Machinery, a machine tool builder and robotics integrator, has been in business for over 30 years. We proudly serve top-tier aerospace and precision manufacturing companies in the US, Canada & Mexico. Our engineering-driven approach integrates reliable technologies into time and money-saving machines. Located in Chino, California, we are expanding our team to meet customer demand. Position: Swiss-Type CNC Lathe Application Engineer • Location: Chino, CA Conveniently located with access to 60, 71, 57 freeways., • Experience Required: • 3+ years of setup and programming experience with Swiss-type lathes such as Tsugami, Citizen, Star, Tornos, etc., • Proficiency using FANUC multi-axis controls • Responsibilities: • Understand customers' machining needs and produce proof of concepts and sample parts quickly using our machine tools., • Analyze part blueprints, recommend machining strategies, select machine & tooling and workholding., • Design fixtures, part grippers, program tool paths, and setup jobs, • Create part programs directly on control or using offline software, create setup sheets, • Run first article inspection, optimize program to meet cycle time, tool life, and quality requirements, • Troubleshoot basic machine problems, ensure quick turnaround, keep workplace organized, • Help sales team prepare presentations of recommended machine tool • Note: We are not a production shop; we create sample parts and test cuts for end-users to evaluate our machines. Powered by JazzHR hxxAZSMlmb

Job Description Come Join Building Electronic Controls Design Team! Are you a passionate AutoCAD Designer looking for an opportunity to express your creativity? Building Electronic Controls, Inc. welcomes individuals who are eager to contribute their design skills and be part of a dynamic team. Our design team collaborates to create the fire alarm designs for the next generation of buildings to grace the skyline of greater Los Angeles. Overview The AutoCAD Designer oversees the design of various commercial fire alarm construction project designs. They work very closely with Field Operations and Customer. The AutoCAD Designer's direct supervisor will be the CAD Manager. Essential Functions As a Full-Time CAD Designer, you will play a key role in crafting accurate CAD format packages for our fire alarm plans. Here's a glimpse of your responsibilities: * Design Coordination: Managing multiple projects from inception to completion, ensuring they align with project hours and different construction phases. * Technical Oversight: Reviewing project scope, product specifications, and fire life safety code compliance for consistency with project specifications, AHJ requirements, and engineer/architect input. * Detailed Layouts: Preparing comprehensive system layouts, including floor plans, Bill of Materials (BOM), sequences of operations, riser diagrams, panel layouts, and calculations. * Revision Expertise: Updating plans based on field changes to create precise as-built drawings. * Effective Communication: Maintaining clear and consistent communication with external customers and internal teams regarding design updates, timelines, and approvals. * Document Presentation: Utilizing in-house printing resources to present your designs professionally. * Special Projects: Taking on additional assignments as delegated by our Operations team. Qualifications Our ideal AutoCAD Designer will possess: • Code Knowledge: Familiarity with NFPA 72 for Fire Life Safety Code., • Software Skills: Proficiency in AutoCAD (5 years' experience on version 2020) and Bluebeam is preferred., • Advanced Skills: Background in BIM/Revit is a plus., • Industry Experience: 3 years of fire alarm design experience (electrical design experience will be considered)., • Construction Understanding: A background in construction is advantageous., • Blueprint Reading: Capability to interpret architectural, mechanical, and electrical plans, layouts, and diagrams., • Time Management: Strong organizational skills to meet project timelines., • Positive Attitude: A professional demeanor and a positive outlook., • Expert Communicator: Able to handle all forms of communication (email, phone call, and verbal) with ease. Benefits: BEC offers the following Section 125 Cafeteria plans: • Group Health Insurance, • 401K Safe-Harbor Matching, • Paid Accrued Vacation Building Electronic Controls, Inc. was established in 1995 and is headquartered in Glendora, CA. BEC is a regional low-voltage electrical contractor focusing on supporting our customers in new construction and in post-construction with maintenance, service, monitoring and testing of the low-voltage systems that we install. The company has 3 satellite offices to provide service throughout California and is family-owned and operated. For additional information about the company please visit our website: . Join Our Team If you're ready to bring your AutoCAD expertise to our creative team and contribute to exciting projects, we invite you to apply today! Company DescriptionBuilding Electronic Controls, Inc. is a leading Union Low-Voltage and Life Safety Systems Integrator. We specialize in providing solutions for Fire Alarm, Smoke Control, Fire Fighter Surveillance, ERRCS, and Area of Rescue in the Southern California and Central California areas. We specialize in providing commercial solutions for various industries, including Airports, Amusement, Corrections, Education, Entertainment, Healthcare, Hospitality, Motion Picture Industry, Retail, and Transportation.Building Electronic Controls, Inc. is a leading Union Low-Voltage and Life Safety Systems Integrator. We specialize in providing solutions for Fire Alarm, Smoke Control, Fire Fighter Surveillance, ERRCS, and Area of Rescue in the Southern California and Central California areas. We specialize in providing commercial solutions for various industries, including Airports, Amusement, Corrections, Education, Entertainment, Healthcare, Hospitality, Motion Picture Industry, Retail, and Transportation.

Job Description Are you looking for the next step in your career? Or are you a mid-career Engineer professional looking for the next big opportunity? Essel is partnering with one of the top water infrastructure firms in the San Gabriel Valley Area who is looking for a SR. Electrical Engineer with experience in the water industry. Accountability: The Senior Electrical Engineer reports to the Engineering Design Manager and is accountable for cost effective and timely delivery of electrical design services in support of our client's water supply plants, water treatment systems, pumping plants, water storage, and water distribution control plants. Job Summary: The Senior Electrical Engineer is responsible for self-performing, leading a design team, and/or managing electrical consultants in the preparation of electrical design services including power, process control, and telemetry for the operation and control of potable water facilities. Coordinates with electrical utilities representatives for new or upsized electrical services to water plants. Prepare process control narratives for use by SCADA integrators. Provide electrical engineering support to company field electricians. Reviews equipment and material submittals to ensure compliance with project objectives and Company standards. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Leads a design team to perform and manage multiple electrical system designs and improvements for potable water plant projects, • Prepares electrical design plans and specifications for new water facilities and improvements and replacements for existing water facilities, • Coordinates internal and external resources (consultants) towards the completion of assigned electrical design projects while working closely with internal Asset Management departments, including Engineering Design, Engineering Planning, Technology Services, Capital Program Management, Operations, and Water Quality to ensure project objectives are achieved, • Prioritizes assigned design projects within area of responsibility. Monitors and reports on design project schedules and budgets and implements corrective actions when needed, • Determine size for electrical services and backup power supplies, • Design Motor Control Centers, Telemetry Panels, and SCADA Panels, • Performs QA/QC on electrical design projects by other engineers and consultants, • Manages consultants and review invoices, • Reviews shop drawing submittals and approves field changes during construction phase, • Represents or assists in representing company in public settings with respect to projects, • Other duties as assigned Requirements Minimum Qualifications: • Bachelor of Science degree in Electrical Engineering from an accredited college or university required, • Minimum of 10 years of relevant experience in designing commercial electrical systems with a civil/mechanical consulting firm or as a private contractor. Previous experience working for a regional electric company and/or another water/wastewater utility with SCADA and system controls experience is preferred, • Minimum of 5 years of progressively responsible experience in supervision of relevant technical support staff is required, • Currently registered in good standing as a Professional Electrical Engineer in the State of California, • Proficient in Microsoft Office 365 software and AutoCAD., • Strong oral and written communication skills, • Ability to work independently to resolve cost, scheduling and resource allocation issues, • Working knowledge of principles and practices of civil engineering design, project management and safe work practices, • Ability to analyze and solve complex electrical engineering problems Benefits Leading Industry Benefits

Job Description Immediate Opportunity for a Mechanical Design Engineer (Contract Position) Key Responsibilities Working Schedule- 6:00 am-2:30 pm or 7:00 am-3:30 pm Pay Rate:$35.00hr Design & Product Support • Design and Development: Lead the design, development, update, and ongoing support of current and new products, ensuring alignment with design specifications., • Technical Documentation: Create accurate and detailed piece part and assembly prints for internal use (manufacturing, assembly, quality control) and external quotation processes., • Process Improvement: Proactively research and initiate ingenious manufacturing techniques to improve product quality, reduce costs, and enhance overall product designs., • Technical Liaison: Provide comprehensive technical support to all manufacturing departments, ensuring seamless production and assembly of parts and finished products., • Documentation Control: Assist in the creation, maintenance, proofing, and publishing of technical documents and product manuals., • Engineering Change Control: Provide backup support to Manufacturing and Purchasing by performing BOM revisions and updates, strictly adhering to ECR/ECN (Engineering Change Request/Notice) procedures, and managing drawing/specification control. Required • Education: Bachelor of Science Degree in an Engineering discipline. A combination of relevant experience and education may be considered in lieu of a Bachelor's degree., • Technical Proficiency: Proficient in SolidWorks for mechanical design, sheet metal design, basic wood cabinetry drafting, and file management. (Proficiency testing may be required)., • Design Expertise: Demonstrated experience with sheet metal component and assembly design., • Software Skills: Fundamental understanding of PDM (Product Data Management) practices and proficiency in Microsoft Office Suite (Excel, Word, Outlook, PowerPoint)., • Experience with Syspro or similar BOM/MRP/ECO Accounting software., • Previous experience in cabinet design and/or electrical design, with knowledge of industry standards such as UL, CE, CSE, and NSF., • Expertise in wood cabinet design. The ideal candidate possesses a high degree of professionalism, integrity, and enthusiasm, and thrives in a dynamic manufacturing environment. • Self-Management: Self-starting and self-managing with the ability to handle diverse situations, anticipate challenges, and take proactive action to ensure success., • Problem-Solver: Capable of identifying creative and effective solutions to unique design and manufacturing challenges., • Communication: Excellent verbal and written communication skills for clear interaction with internal teams, vendors, and customers., • Drive & Urgency: Demonstrates an extreme sense of urgency with a hands-on approach and a willingness to jump in and get things done., • Adaptability: Possesses the flexibility and willingness to adapt to a rapidly changing environment and embrace new challenges. Success in this role will be measured by the individual's ability to solve complex problems and the resulting impact on cross-departmental goal achievement. The Mechanical Design Engineer is directly accountable for ensuring all Bills of Materials, Work Order Routings, and Drawing packages maintain the highest level of accuracy and quality. Company DescriptionAt United Employment Solutions, we have a supportive and collaborative work environment where your contributions are valued, alongside opportunities for advancement and competitive benefits. Together, we uphold a culture of innovation, diversity, and excellence, making a meaningful impact in our industry and beyond. Join us in shaping the future of staffing by creating a reliable and qualified workforce.At United Employment Solutions, we have a supportive and collaborative work environment where your contributions are valued, alongside opportunities for advancement and competitive benefits. Together, we uphold a culture of innovation, diversity, and excellence, making a meaningful impact in our industry and beyond. Join us in shaping the future of staffing by creating a reliable and qualified workforce.

Job Description Senior Engineer 1, Ready Grid Summary The Senior Engineer 1, Ready Grid provides technical leadership in evaluating mitigation options, including traditional upgrades, non-wire alternatives, and emerging technologies for areas experiencing significant growth. This role collaborates with cross-functional teams to develop and implement proactive grid buildout strategies that align with long-term electrification and decarbonization goals. Responsibilities * Oversee engineers performing diagnostics, monitoring, and equipment inspections, while fostering cross-functional knowledge transfer. * Lead the preparation of technical reports, presentations, and documentation to communicate project status, findings, and recommendations. * Collaborate with cross-functional teams to ensure successful development, integration, and implementation of technologies and asset performance management strategies. * Contribute to engineering and business initiatives, including the development of innovative procedures and design recommendations. * Provide support for new equipment installation and startup, including transition to sustaining phases. * Guide junior engineers in investigating distribution system infrastructure threats based on observations and findings. * Gather and correlate data using engineering studies and procedures, including routine and diagnostic testing. * Facilitate training and professional development opportunities to enhance team skills and knowledge. * Ensure protection of physical, financial, and cybersecurity assets, while managing sensitive customer and proprietary data with the highest standards of integrity. Minimum Qualifications * Bachelors Degree in Engineering or a scientific/technical/math field. * Seven or more years of engineering experience in operations, production, construction, or maintenance environments. * Possess a valid Class C Drivers License. Preferred Qualifications * Bachelors degree or higher in Electrical Engineering, Power Systems, or related field. * Five or more years of experience in utility planning, load forecasting, or grid operations. * Strong understanding of utility infrastructure, planning, scoping, grid solutions, and regulatory frameworks. * Proficiency with system analysis tools (e.g., CYME, Python, PSLF, or load forecasting software). * Professional Engineer (PE) License. * Experience preparing detailed engineering studies and reports. * Strong written communication skills for technical reporting and management presentations. * Passion for innovation and implementing cutting-edge technologies to enhance system reliability and performance.

Job Description Are you an experienced Senior Electrical Engineer looking for a new opportunity to showcase your skills? Look no further, Essel is hiring a Senior Electrical Engineer to join our dynamic team. In this role, you will be responsible for leading and overseeing electrical engineering projects from conception to completion. You will collaborate with cross-functional teams, provide technical guidance, and ensure the successful execution of projects. Responsibilities: • Lead and manage electrical engineering projects from start to finish, • Develop electrical designs, plans, and specifications, • Review and approve electrical system designs and components, • Collaborate with other engineering disciplines to integrate electrical systems into overall designs, • Provide technical guidance and mentorship to junior engineers, • Conduct quality control checks and ensure compliance with industry standards and regulations, • Manage project budgets and schedules, • Coordinate with clients, contractors, and suppliers, • Participate in design reviews and provide technical input, • Bachelor's degree in Electrical Engineering or related field, • Minimum of 5 years of experience as an Electrical Engineer, • Professional Engineer (PE) license is preferred, • Proficiency in electrical design software and tools, • Strong knowledge of electrical codes and regulations, • Excellent problem-solving and analytical skills, • Strong leadership and project management abilities, • Effective communication and interpersonal skills, • Ability to work well in a team environment, • Bachelor's degree in Electrical Engineering or related field, • Minimum of 5 years of experience as an Electrical Engineer, • Professional Engineer (PE) license is preferred, • Proficiency in electrical design software and tools, • Strong knowledge of electrical codes and regulations, • Excellent problem-solving and analytical skills, • Strong leadership and project management abilities, • Effective communication and interpersonal skills, • Ability to work well in a team environment Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance

Job DescriptionKosmos Group is an engineering consulting firm, specializing in electrical power generation, transmission, substation, and distribution. We support public and private utilities, consultants, and contractors across the U.S. and Canada, providing end-to-end engineering solutions, including conceptual design, feasibility study, detailed design, construction drawing package, field inspection, project closeout documentation, and more. At Kosmos Group, we foster an open, collaborative, and supportive culture. We believe our employees reach their full potential when they feel valued and empowered through innovation, teamwork, and growth. We deliver reliable solutions for the future and are a positive influence in our communities Our Transmission Engineering team is looking for a Transmission Line Engineer to support our growing Transmission & Distribution practice in our Diamond Bar office. This is a hybrid position, working 3 days in the office and 2 days from home office. The successful candidate will be involved in all facets of transmission line routing and design. Specific areas of responsibility are provided below. Job Description • Routing and design a variety of transmission line projects with project scopes varying from new to rebuilt facilities utilizing Power Line Systems software, • Responsible for technical content and deliverables while working with multi-discipline teams under the guidance of the assigned Project Engineer or Manager, • Sag tension calculation for transmission tower loading, • Structure design and analysis and preparing loading trees, • Assist in the development of design criteria and specifications for transmission line design and procurement of materials, • Perform peer quality checks, • Should be familiar with Transmission industry codes and standards, • Assist Engineer of Record in preparing construction documents including plan and profile drawings, structure loading trees, and foundation and assembly drawings, • Assist Engineer of Record with complex projects and be the lead engineer for smaller projects, • Provide construction support for high voltage transmission line projects, • Participate and progress the company culture of knowledge sharing and continuous improvement, • Act as a liaison between Kosmos Group engineering and construction teams by conducting field site visits, • Apply engineering principals and technical experience address project issues and recommend solutions, • Additional duties as assignedRequired Qualifications, • Bachelor’s degree in engineering from an ABET-accredited college, • An Engineering-in-Training (EIT) certificate, • Minimum 2 years of transmission line design experience, • Experience in Power Line System-based programs (i.e., PLS Suite of software including PLS-CADD, PLS-POLE, etc.), • Strong attention to detail, team collaboration, organization, and problem-solving skills, • Ability to work methodically and analytically in a quantitative problem-solving environment, • Excellent written and verbal communication skills, • Ability to travel domestically and internationally as needed for project supportPreferred Qualifications, • Prior engineering consulting experienceFor California only: this position's base salary range approximation is $98,000.00 - $148,000.00 and it depends on numerous factors such as applicable experience, skills, knowledge, credentials, geographical location, etc. We’re seeking passionate individuals who bring fresh perspectives and innovative ideas. This is an exciting time to join our team as we gear up to grow and tackle future challenges. We prioritize safety, foster collaboration, act with integrity, respect all perspectives, and embrace forward-thinking. Are you ready to be a part of the journey? Kosmos Group is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.

Job Description PM2CM, Inc., (Project Management to Construction Management) is a professional services company dedicated to providing Program and Project Management, Construction Management and Project Controls services during the design and construction phase of projects. Our core expertise is in Project Controls which includes Scheduling, Cost Controls, Document Management and Controls, Budget tracking and monitoring, Estimating, Risk Analysis, Claims avoidance and Mitigation, Change Management and Earned Value Management. Position is located in Pomona, California. Hybrid-Remote (Tuesday and Wednesday in the office/field) JOB OPPORTUNITY: WE ARE HIRING JUNIOR LEVEL COST ENGINEERS WITH 1 OR MORE YEARS OF WORK EXPERIENCE TO WORK ON ELECTRICAL INFRASTRUCTURE PROJECTS WITH ONE OF THE LARGEST UTILITIES IN SOUTHERN CALIFORNIA. THIS IS A HYBRID POSITION WHERE THE SUCCESSFUL CANDIDATE WILL HAVE THE FLEXIBILITY TO WORK FROM HOME FOUR DAYS A WEEK AND REQUIRED TO COME INTO THE CLIENT OFFICES LOCATED IN POMONA, ONE DAY A WEEK. Job description: • This position requires use of MS Excel software to analyze and aggregate data related to Budgets, Actual Costs and Forecast Costs, hence candidate must possess very good Excel skills (Good knowledge of Excel functions which includes VLOOKUP, INDEX, MATCH, SUMIFS, COUNTIFS, SUBTOTAL, IF, OFFSET, PIVOT TABLES & CHARTS), • Candidate will report to a Senior Cost Engineer and will assist in developing project budgets, track actual costs and forecast project costs, for a portfolio of projects, • Candidate will be required to interface with multiple stakeholders which includes Project Manager, Engineering, Procurement and Construction Manager, • Candidate must possess excellent communication skills, self starter and a team player, • Prior work experience in Cost Controls, Budgeting, Cost Forecasting will be a plus but not a mandatory requirement but afore mentioned Excel skills is a mandatory requirement, • Good working knowledge of MS Office Software Suite Requirements Minimum Qualification: A combination of education, training, and experience, generally equivalent to those typically possessed by a 4-year college graduate.

Job DescriptionThe Engineering Team at Russell Tobin & Associates is supporting a world-class organization that has an opening for “Engineer 3”. Apply today for early consideration! Engineer 3 Vacaville, CA 95688 United States Duration: 06+ Months Pay rate: $55 -$66.03/Hr. Job description: Day-to-Day Responsibilities/Workload: • Support capital program type projects as needed (DSP, TSP, SUB IR, DSERP, etc.), • Gather and evaluate line data of transmission, sub-transmission, distribution systems, transformer test data, generator data, etc. Model systems on appropriate software tool, such as CAPE, perform short circuit studies, and protection coordination studies necessary for completing relay settings, perform relay settings, prepare protection summary, coordinate relay settings with neighboring utilities, balancing authorities and perform other required assignments meeting WECC and NERC PRC compliance., • Issue Substation Relays and field Auto recloser settings (Client, SEL and Electromagnetic) via ASPEN relay database to the field, support Test technicians in-servicing or commissioning relay settings, review/approve returned as-left relay setting files, and communicate with Test technicians for making revisions/changes to relay settings as necessary., • Perform system studies, provide protection requirements for design, • Provide support to the Test Technicians and Operators., • Travel to the field may be required from time to time per project job walk or testing needs., • QA Support in review of protection deliverables (settings, relay electronic files, calculations, logic, etc) Required Skills/Attributes: • Experience with protection, substation and/or distribution engineering in the electric utility industry or equivalent, • Bachelor’s degree in electrical engineering or related technical discipline., • 10 years of experience, • PE, • Developed and peer-reviewed protective relay settings for systems ranging from 12kV to 765kV, demonstrating deep technical knowledge across a wide voltage spectrum., • Led and executed short circuit studies and designed step distance and pilot protection schemes for 44–100kV lines, ensuring system reliability and compliance with FAC-008/NERC/IEEE/IEC/ANSI standards., • Trained multiple engineers in relay settings development and short circuit analysis, reflecting strong leadership and knowledge transfer capabilities., • Ten years of engineering experience related to Transmission & Distribution., • Knowledge of transmission system operation (line-and-bus arrangements, reclosing practices, etc.), • Knowledge of System One-Line Diagram and relay AC and DC Schematics as well as AC and DC wiring standards, • Knowledge of digital logic design principles (logic gates, latches, etc.) and experience in developing logic diagrams, • Demonstrated experience with Computer Aided Protection Engineering Software (CAPE), CYME, ASPEN relay database or Blue Beam Software., • Ability to interpret/apply/design electrical one-line, elementary, protection logic diagrams., • Experience in performing system studies, symmetrical component analysis, fault calculation, and set Electromechanical Relays, SEL and Client microprocessor relays using Accelerator and URPC software Desired Skills/Attributes: • Demonstrated experience in developing logic diagrams, programming relay settings and preparing setting documents for Test technicians and support them for in-servicing relays for bulk-power (220/115 kV) transmission lines, bus, transformer banks, capacitor banks, reactor banks, etc., • Demonstrated experience with automation of sub-transmission substations, protective relay upgrades in transformer banks, transmission and distribution lines, and protective fuse and auto-recloser setting calculations in distribution lines., • Experience using application software such as Microsoft Word, Excel, PowerPoint, Access, Visio, and Project., • Must demonstrate effective resource and project planning, decision making, results delivery, and the ability to stay current with relevant technology and innovation., • Possesses good communication skills (oral and written) applied to customer focus in support of appropriate identification of, and response to, client business needs. Benefits: Russell Tobin offers eligible employee’s comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance and hospital indemnity), a 401(k)-retirement savings, life & disability insurance, an employee assistance program, identity theft protection, legal support, auto and home insurance, pet insurance, and employee discounts with some preferred vendors. #LI-HA2 #rta-zr JD-#SCIENCE #RTA

Job Description Quality Engineer supports all aspects of the Quality Management System, Product Realization and Manufacturing Process Controls. Working with cross functional partners, defines and generates quality control plans, production process controls and procedures. Leads and supports validations including statistical analysis. Engages with customers to address quality issues and define acceptance criteria/attributes. Essential Job Functions and Responsibilities: • Support the development and manufacturing of medical devices in conformance with applicable ISO 13485 requirements. Responsible for quality planning of all new development programs and design transfers to production., • Ensure policies and procedures comply with regulations and external standards, including software regulations, risk management, and change control., • Interact and form constructive working relationships with all levels of leadership within Quality, Procurement, Marketing, Engineering, and Operations., • Collaborate with Program Managers, Process Engineers, and/or Validation Engineers to execute process and equipment qualifications., • Problem Resolution: identification, data collection and trend analysis, reporting, and initiation of corrective and/or preventive action as well as reporting out of Key Metrics., • Identify opportunities and implement solutions to drive continuous improvement in performance metrics., • Investigate customer complaints, corrective actions and trending to drive improvements. * Plan and perform regular audits of quality system and drive system improvements through the Internal Audit and Quality Event Management (CAPA, NCR, Complaint etc.), • Monitoring and improvement of SPC systems, sampling plans and statistical methods. * Back-up and or perform to Head of Site Quality/Supervisor Representative, as assigned., • Plan, prepare, and execute Internal Audits, as assigned., • Participate in Material Review Board and/or Change Control Board as QA representative., • Utilize tools, gauges and other inspection equipment to obtain product specification data * Expert in utilizing hand measurement tools (Caliper, Micrometer, Ruler, Gage Blocks, height gage, etc.)., • High Proficiency with PCDMIS inspection software utilizing CMM’s: Brown, Sharpe, Hexagon, Smart scope., • Expert with utilizing ANSI Sampling Plans, IQMS, Minitab, Excel and Microsoft Word, • High Proficiency in material analysis (i.e. FTIR, Melt Flow Testing, etc.), • Ability to read and decipher blueprints * Proficient in metrology and calibration., • Working knowledge of statistical methods for manufacturing., • Minimum Education: five (5) years’ experience in a similar field. Working knowledge in problem solving methodologies. Excellent oral and written communication skills., • Minimum Experience: At least two (2) year experience in a supervision and/or management role. Demonstrated experience to lead teams and projects. Good organizational skills. Previous experience in plastic injection molding related environment., • Demonstrated experience to lead teams and projects. Good organizational skills. Previous experience in plastic injection molding related environment., • Working in a medical device or other FDA regulated industry. Comprehensive understanding of ISO 9001, ISO 13485, JPAL MHLW Ordinance 169, and/or FDA QSR regulatory requirements. Computer literate with working knowledge of MS Word, Excel, and Access., • Desired candidate will have prior work history in MSA, SPC, Mini-tab, Infinity, sterilization, & clean room environment. *Knowledge, Skills, and Abilities, • A working knowledge of FDA cGMP, ISO13485 requirements, • A working knowledge of medical device manufacturing quality systems., • 3-7 Years in Quality Engineering in manufacturing and/or quality assurance., • Training in applicable ISO 9001, ISO 13485., • Experience using Minitab., • Proficient in metrology and calibration standards., • Proficient in Quality Audit concepts., • FDA quality standards experience a plus., • Certifications such as ASQ CQE, CQA, CQM, • Warehouse areas (limited), • Will be required to perform other duties as requested, directed or assigned.

Ignite Your Career as a Project Engineer – Shape the Future With Us! Ready to elevate your career and make a real impact? Join our team and bring your skills to life in the fast-paced world of construction. We're seeking a detail-oriented Project Engineer to lead planning, scheduling, and cost control on critical projects. Collaborate with top professionals, drive innovation, and help deliver high-impact results. If you're passionate about creating solutions and thrive on bringing projects to life, this is your chance to shine! Key Responsibilities • Lead the charge in monitoring project expenditures, ensuring invoices and claims stay on track., • Provide expert planning and cost control support, streamlining reporting and billing processes., • Manage pre-construction activities and take ownership of project schedules and progress tracking., • Collaborate with dynamic project teams to tackle challenges and deliver outstanding results., • Create monthly cost reports and represent our team in client meetings. Requirements • Bachelor in Engineering, Construction Management or related preferred, • 2+ years of experience in planning or project management, ideally within construction or utilities., • Experience with Traffic or Road Improvement projects highly valued., • A knack for organization and meeting deadlines., • Proficiency in Excel and project management software (Viewpoint experience is a bonus)., • Experience with public works —a game-changer! Benefits • Comprehensive health, dental, and vision coverage., • 401K matching to invest in your future., • Paid Time Off to recharge and maintain work-life balance., • Opportunity to grow within our organization and take on new responsibilities as we continue to expand., • The chance to work on high-impact projects within an international organization. About us Belco, part of the global Elecnor Group, is a leading force in Southern California's and Texas' construction industry. With over 25 years of experience, we offer the stability of an international corporation combined with local expertise. Our commitment to innovation, sustainability, and quality is reflected in everything we do. Join our team and contribute to cutting-edge projects that are shaping the future of infrastructure in the U.S. Note: All qualified candidates are encouraged to apply. Elecnor Belco Electric, Inc. is an Equal Opportunity Employer.

Computer Science, Software Engineering, or related discipline strongly preferred. Effectively leading teams and mentoring junior software engineers. About the job Cloud Engineer (Remote).

Were building the next generation of hiring software that companies like Netflix, Yelp, Cirque du Soleil, Shopify, and Spotify rely on to grow their teams. Lever builds modern recruiting software for teams to source, interview, and hire top talent. Our team strives to set a new bar for enterprise so

Job DescriptionSalary: $100,000-$125,000 Join PBS Engineers and help us transform the industry Are you a driven professional seeking new challenges while advancing your career? PBS Engineers is looking for talented individuals to join our team and help us deliver exceptional service to our clients. If you thrive in a collaborative environment and are passionate about providing top-tier engineering solutions, you belong at PBS. As a dynamic firm committed to quality and excellence, we see our team as a family and prioritize the professional growth of each member. Our unwavering dedication to superior engineering has earned us extensive experience across diverse market sectors. With offices in San Dimas (Headquarters), San Diego, Orange County, Los Angeles, Santa Clara, and Houston, our engineers work closely with our Principals to provide personalized service to every client. At PBS, we foster a unique workplace culture where employee well-being and satisfaction are at the heart of our mission. By investing in our engineers, we empower our team to excel together, strengthening our position as a leader in consulting engineering. Were ready to invest in youlets grow and lead the industry together! Visit more information on our dynamic team. Our mission at PBS is toprovide WOW through service via our personalized solutions and hands-on approach. We request that the following PBS Core Values be upheld to support our continuous growth and that you commit to embracing these fundamental principles: • Work Hard, Play Hard, • Be Better Than You Were Yesterday, • Supporting Team Member Excellence & Happiness, • Go the Extra Mile, and Then Some, • Build Lasting Relationships and a Family Spirit, • Be a Speed Boat Mid-level low voltage technology engineer Roles and Responsibilities Effectively manage Low Voltage (Structural Cabling, AV, Security, and other low voltage systems) and multi-discipline projects by satisfying clients' needs and meeting budget expectations and project schedules. Interact with facility and major business clients to identify their requirements, define project scope, and prepare project proposals. Prepare to build low-voltage engineering designs for Structured Cabling, Access Control Systems, CCTV, Voice and data systems, communications room layout, and building infrastructure for low-voltage systems. Provide support during construction phases and be a quick thinker to solve potential issues and obstacles in the field. Key Responsibilities: • Use client directives and site-specific design criteria and apply engineering principles and skills to prepare the design of low-voltage and telecommunications systems, equipment, components, and products for commercial and industrial purposes and assist in developing bid and contract documents., • Design and produce plans and documents, including voice, data, structured cabling (horizontal and vertical), audio-visual, security, access control, intrusion detection, and other low-voltage systems, including inside and outside the plant., • Coordinate system scope, design layout, and drawings with clients and other disciplines., • Perform telecommunications and low-voltage systems analysis and develop appropriate system concepts, layouts, and details., • Oversee projects from inception through final transition and coordinate with senior management, clients, and subcontractors, ensuring the schedules are met and resources remain in check., • Prepare technical specifications., • Knowledge of NEC, IEEE, EIA, TIA, industry standards, and other applicable codes related to the design and layout of low voltage and telecommunications systems., • This position may also entail working with engineers preparing schedules, budgets, and status reports., • Prepare layout prints for supervisor or client Job Qualifications Minimum qualifications: • 3-6+ years of related electrical and communications design/engineering experience on commercial and industrial multi-use buildings., • Recent experience working for a consulting engineer or engineer/architectural firm designing Low Voltage systems for facilities/buildings., • Proficiency with Revit and AutoCAD design software, and ability to do own design engineering work., • Experience with existing building renovations and tenant improvements., • Ability to solve complex design problems., • Excellent communication and interpersonal skills to work in a collaborative team environment., • Ability to work well under pressure, multi-task, and engage with multi-discipline project teams in meeting client needs in a timely manner and within budget objectives., • Strong organizational skills, creativity, and enthusiasm., • RCDD Preferred; OSP and NTS a plus, • Building Industry Consulting Service International (BICSI) Member desired, • Design-build experience is a plus, • Full-Time Career Position with highly competitive pay that includes performance-based incentive plans., • Retirement Savings 401(k) plan with corporate matching., • Excellent Full Benefits Package: Includes comprehensive Health, Dental, and Vision Insurance for employee and immediate family and Group Life/AD&D insurance for employee., • Availability of Voluntary Life Insurance, Short Term Disability, Long Term Disability, and Health Savings Account (HSA) and Flexible Spending Account (FSA) options., • 11.5 paid holidays per year., • Paid Time Off for sick leave and vacation., • A highly sought-after work environment which fosters creativity and collaboration., • Professional development and continuing education opportunities., • Growth potential within the company thats unique within our industry and offers clear career path options., • Associate-Senior Associate-Principal (ASAP) Program offered to encourage employees to take a more active role in the corporation and build a more secure and rewarding future., • Receptive and Forward-Thinking Leadership. If you are a highly motivated and detail-oriented Technology Design Engineer looking to take on a new role at a growing and industry-leading firm, we encourage you to apply and join our team

Job Description Project Manager II & III PM2CM, Inc., (Project Management to Construction Management) is a professional services company dedicated to providing Program and Project Management, Construction Management and Project Controls services during the design and construction phase of projects. Our core expertise is in Project Controls which includes Scheduling, Cost Controls, Document Management and Controls, Budget tracking and monitoring, Estimating, Risk Analysis, Claims avoidance and Mitigation, Change Management and Earned Value Management. The position is in Pomona, CA. Hybrid-Remote (Tuesday and Wednesday in the office/field) Become a Project Manager at one of the largest utility companies in Southern California managing electric infrastructure projects. In this job, you’ll be part of the Construction & Technical Support (C&TS) organization and will directly collaborate with the company's customers and internal groups. This organization provides project and program management for Transmission and Distribution. The volume of transmission projects is projected to continue to grow over the next several years. These projects are growing in number, size, complexity, and strategic impact. Due to the high visibility of these projects by regulators, public and environmental agencies, and major customers, they must be managed consistently and carefully. The primary purpose of the Project Manager role is to improve the success rate of projects by applying project management principals, methods, tools, and standards. Individuals are typically certified as Professional Project Managers and apply their knowledge and experience in a variety of functions and projects across the organization. As a Project Manager, your work will help power our planet, reduce carbon emissions, and create cleaner air for everyone. Are you ready to take on the challenge to help us build the future? A day in the life - Get ready to think big, work smart and shine bright! • Manages projects and programs within the organization: Projects and programs may include relocation of existing facilities, and small civil capital projects., • Responsible for project cost management related to budgeting, forecasting, and trends., • Manages 5-10 active projects and coordinate contractors and material., • Coordinate activities, resources, equipment, and information necessary for project completion, maintaining project plans, reports, and technical documents, and serving as a point of contact for the project team ensuring effective communication and team coordination., • Lead planning, monitoring, and management of internal projects including complex, multi-year initiatives within and across OUs such as Finance, Regulatory, HR, Engineering, Transmission & Distribution, Legal, Customer Support, and Administrative Services as well as construction projects, infrastructure investment, and new facilities from initiation through completion., • Updates project documentation data in files and multiple software systems. Requests, receives, evaluates, and prioritizes data into hard files, Microsoft software programs, etc., • Initiates and issues documentation including Authorization to Proceed (ATP), Release to Construct (RTC), letters, agreements, contracts, trends, work order requests, etc. as the need arises., • Lead development of project, resource, and staffing plans, secure required resources, track, and report on progress, troubleshoot issues and ensure project results meet requirements regarding technical quality, reliability, schedule, cost, and regulatory requirements., • Monitor performance and recommend schedule changes, cost adjustments or resource additions including determining how changes will impact status, budget, and timeline., • Evaluates submittals, letters, plans project / program files for completeness with associated processes and procedures., • Upon completion of projects follow associated processes and procedures associated with closeout and reconciliation., • Schedules and leads internal and external meetings with associated agendas, meeting minutes, action items. The essentials: • Bachelor’s degree in business administration, Engineering or Construction Management., • Seven to ten years of Project Management experience including ownership of scope, cost, and schedule., • Experience with transmission, distribution, and/or substation line construction, maintenance, or operations regulations., • Utility Industry experience preferred., • Experience working as a resident engineer to oversee drawings that need to be issued., • Experience communicating and collaborating effectively with external clients, various organizations across SCE, and all levels of management to lead and drive projects., • Experience working with all Microsoft office programs, SAP, Design Manager (DM), Google Earth Pro, and Adobe Acrobat Pro.

Job Description Project Manager II (Engineering) PM2CM, Inc., (Project Management to Construction Management) is a professional services company dedicated to providing Program and Project Management, Construction Management and Project Controls services during the design and construction phase of projects. Our core expertise is in Project Controls which includes Scheduling, Cost Controls, Document Management and Controls, Budget tracking and monitoring, Estimating, Risk Analysis, Claims avoidance and Mitigation, Change Management and Earned Value Management. The position is in Pomona, CA. Hybrid-Remote (Tuesday and Wednesday in the office/field) Become a Project Manager at one of the largest utility companies in Southern California managing electric infrastructure projects. In this job, you’ll be part of the Construction & Technical Support (C&TS) organization and will directly collaborate with the company's customers and internal groups. This organization provides project and program management for Transmission and Distribution. The volume of transmission projects is projected to continue to grow over the next several years. These projects are growing in number, size, complexity, and strategic impact. Due to the high visibility of these projects by regulators, public and environmental agencies, and major customers, they must be managed consistently and carefully. The primary purpose of the Project Manager role is to improve the success rate of projects by applying project management principals, methods, tools, and standards. Individuals are typically certified as Professional Project Managers and apply their knowledge and experience in a variety of functions and projects across the organization. As a Project Manager, your work will help power our planet, reduce carbon emissions, and create cleaner air for everyone. Are you ready to take on the challenge to help us build the future? A day in the life - Get ready to think big, work smart and shine bright! • Manages projects and programs within the organization: Projects and programs may include relocation of existing facilities, and small civil capital projects., • Responsible for project cost management related to budgeting, forecasting, and trends., • Manages 5-10 active projects and coordinate contractors and material., • Coordinate activities, resources, equipment, and information necessary for project completion, maintaining project plans, reports, and technical documents, and serving as a point of contact for the project team ensuring effective communication and team coordination., • Lead planning, monitoring, and management of internal projects including complex, multi-year initiatives within and across OUs such as Finance, Regulatory, HR, Engineering, Transmission & Distribution, Legal, Customer Support, and Administrative Services as well as construction projects, infrastructure investment, and new facilities from initiation through completion., • Updates project documentation data in files and multiple software systems. Requests, receives, evaluates, and prioritizes data into hard files, Microsoft software programs, etc., • Initiates and issues documentation including Authorization to Proceed (ATP), Release to Construct (RTC), letters, agreements, contracts, trends, work order requests, etc. as the need arises., • Lead development of project, resource, and staffing plans, secure required resources, track, and report on progress, troubleshoot issues and ensure project results meet requirements regarding technical quality, reliability, schedule, cost, and regulatory requirements., • Monitor performance and recommend schedule changes, cost adjustments or resource additions including determining how changes will impact status, budget, and timeline., • Evaluates submittals, letters, plans project / program files for completeness with associated processes and procedures., • Upon completion of projects follow associated processes and procedures associated with closeout and reconciliation., • Schedules and leads internal and external meetings with associated agendas, meeting minutes, action items. The essentials: • Bachelor’s Degree in Engineering required., • Seven years of Project Management experience including ownership of scope, cost, and schedule., • Ability to lead multiple sophisticated projects in a fast-paced environment with minimum supervision and tight time constraints. The preferred: • Experience with transmission, distribution, and/or substation line construction, maintenance, or operations regulations., • Utility Industry experience preferred., • Experience working as a resident engineer to oversee drawings that need to be issued., • Experience communicating and collaborating effectively with external clients, various organizations across SCE, and all levels of management to lead and drive projects., • Experience working with all Microsoft office programs, SAP, Design Manager (DM), Google Earth Pro, and Adobe Acrobat Pro.

Bioinformatics Software Engineer. This is an exciting opportunity to work at the intersection of software engineering, bioinformatics, and therapeutic design, contributing to impactful research in the biotech space. Knowledge of antibody engineering and developability assessment.

Honey Health is seeking a Senior/Staff Software Engineer to build leading AI Agent systems that transform healthcare operations. You’ve built cutting-edge AI and Agentic systems, ranging from tool-calling stacks to MCP-style frameworks, and bring hands-on experience with LangChain, context enginee

SuperDial is seeking a Staff Software Engineer to build and scale the backend systems that power large language model (LLM) applications in healthcare. This role is ideal for an engineer who thrives at the intersection of backend architecture and applied AI, designing APIs, pipelines, and infrastruc

LangChain, context engineering techniques, and RL-enhanced agents.

Software Engineer Job Duties: Develops information systems by designing, developing, and installing software solutions. Accomplishes engineering and organization mission by completing related result

SuperDial is seeking a Staff Software Engineer to build and scale the backend systems that power large language model (LLM) applications in healthcare. Engineer solutions for caching, batching, load balancing, and scaling LLM workloads across cloud and containerized environments. Partner with produc

Staff Software Engineer Remote Job Duties: • Implement and evolve a Data Lake storage system with low latency and high throughput for bulk data ingestion and query • Implement metadata, data governance, security, and acce

This is a full-time opportunity for a Senior or Staff Backend Engineer located remotely within the U. The company values innovation, speed, and autonomy, ideal for engineers who enjoy building systems from the ground up and iterating quickly.

Software Engineer Job Duties: Develops information systems by designing, developing, and installing software solutions. Develops software solutions by studying information needs, conferring with users,

We’re working with a growing software organization that’s seeking a Part-Time Contract AI/ML Software Sales Engineer. Proven ability to generate leads and close business for SaaS-based software. Familiarity with AI/ML or advanced software products.

Powertrain Performance Test Engineer. HATCI) is seeking a highly motivated and proactive engineer for the Performance and Drivability Development Team. The Powertrain Performance Test Engineer would work with subject propulsion systems (i.

Exciting new fully remote contract position for a QA Software Engineer with an established firm. Must have a strong background as a Test Engineer with a testing background in Payroll or HR or Accounts Payable or Finance or Supply Chain.

We are hiring a QA Validation Engineer. Provide quality assurance oversight to validation, engineering, and manufacturing, ensuring compliance with regulatory requirements (FDA, CGMP, GDP). Collaborate with cross-functional teams including Engineering, Manufacturing, and Quality Control to support v

We’re working with a growing software organization that’s seeking a Part-Time Contract AI/ML Software Sales Engineer. Proven ability to generate leads and close business for SaaS-based software. Familiarity with AI/ML or advanced software products.

Major in Computer Science, Computer Information Systems, Software Engineering, Computer Engineering, Business Information Systems, or related field. The developer in this role will collaborate with senior software developers to support custom. NET web applications, design and create reports for appl

Data manager/ Data architect / Data engineer lead, to join this global team of Imaging data managers to realize the product vision and value.

Act as a tenant to draw out a workable application design and coding parameters with the essential functionalities Breakdown the process into multiple packets to distribute to other relevant technology project teams Develop various process flow diagrams and working models to streamline the process C

Act as a tenant to draw out a workable application design and coding parameters with the essential functionalities Breakdown the process into multiple packets to distribute to other relevant technology project teams Develop various process flow diagrams and working models to streamline the process C