Software engineer jobs in Orlando, Florida - Page 3Create job alerts

Job Description Position Overview: We are seeking a Senior Engineering Manager to lead the execution of large extra high voltage (EHV) overhead transmission line projects, 345 kV and above. This role combines technical authority with leadership responsibilities, managing multi-discipline engineering teams, budgets, schedules, and project quality while supporting clients and strategic initiatives. Key Responsibilities: * Lead design, engineering, and execution of large EHV overhead transmission line projects. * Serve as senior technical authority and engineer-of-record. * Manage multi-discipline engineering teams, project budgets, schedules, and design quality. * Support client engagement, change management, and project pursuits. * Ensure compliance with industry standards and best practices. Qualifications: * Bachelors degree in Electrical, Civil, or related Engineering field. * 11+ years in overhead transmission line engineering. * Direct experience with 345 kV+ transmission lines. * EPC or utility-facing project leadership experience. * Professional Engineer (PE) license strongly preferred. * Expertise in PLS-CADD software. * Experience in 345 kV or higher transmission line structural design. * Strong technical and leadership capabilities. * Proven ability to manage multi-discipline teams and complex projects. * Effective client-facing and communication skills. Locations Open To Candidates: Tualatin, OR | Irvine, CA | Houston, TX | Overland Park, KS | Denver, CO | Bloomington, MN | Ann Arbor, MI | Raleigh, NC

Job Description Thompson Gray is an Equal Opportunity Employer and VEVRAA Federal Contractor. This contractor and subcontractor shall abide by the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, gender identity, sexual orientation or national origin. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, gender identity, sexual orientation national origin, protected veteran status or disability. Thompson Gray, Inc. welcomes minority and veteran applicants. Mission Command Engineer Location: Orlando, FL (PEO STRI) Security Clearance: TS-SCI (Required) Experience: 10+ years of relevant experience in mission command systems, or 5 years of other relevant experience Work Schedule: Hybrid, In office 2 days a week Job Summary: PEO STRI is seeking a highly skilled and experienced Mission Command Engineer to support its mission of delivering cutting-edge simulation and training solutions for the Army. The ideal candidate will have a background in Battle Command Common Services (BCCS) and Mission Command Information Systems, with a deep understanding of mission command operations. Key Responsibilities: • Provide expert engineering support for Mission Command Information Systems (MCIS) and Battle Command Common Services (BCCS) architecture., • Lead the design, development, integration, and sustainment of mission command systems and solutions., • Coordinate with various stakeholders to assess system requirements and develop tailored solutions to meet operational needs., • Develop technical documentation and support system architecture design., • Perform troubleshooting, testing, and configuration management for mission command systems., • Interface with project managers, military units, and other technical personnel to deliver mission-oriented outcomes., • Ensure systems meet stringent security standards and function within the constraints of classified environments. Minimum Qualifications: • Experience: 10+ years of relevant experience in mission command systems, or 5 years of experience with a Bachelor's degree in engineering, computer science, or a related field., • Mission Command Expertise: Proven experience with Battle Command Common Services (BCCS) and Mission Command Information Systems., • Security Clearance: Active TS-SCI clearance (mandatory)., • Technical Skills: Deep understanding of software/hardware systems related to mission command and their lifecycle support requirements., • Problem-Solving Skills: Strong troubleshooting and problem-solving abilities, particularly in high-stress, mission-critical environments., • Ability to work in a classified environment., • Strong written and verbal communication skills., • Experience working in cross-functional teams and interacting with military personnel. Preferred Qualifications: • Advanced degrees in engineering, information technology, or related fields., • Experience with Army or DoD systems and protocols., • Familiarity with software development, systems integration, and cyber security measures within mission command systems. Job Posted by ApplicantPro

Job DescriptionJob SummaryAVT Simulation is seeking a talented and motivated Manufacturing Engineer to join our dynamic team. As a Manufacturing Engineer at AVT Simulation, you will play a crucial role in optimizing manufacturing processes, ensuring product quality, and contributing to the development of state-of-the-art simulation solutions.Responsibilities/Duties/Functions/TasksSupports the design and development of customer-specific products with consideration to achieving manufacturability, quality, safety and cost goals. Tasks include: • Process Optimization: Analyze and improve manufacturing processes to enhance efficiency, reduce costs, and increase overall productivity., • Quality Assurance: Implement and maintain quality control measures to ensure the highest standards of product quality in the manufacturing process., • Collaboration: Work closely with cross-functional teams, including design, production, and testing, to streamline the manufacturing process and address any issues that may arise., • Documentation: Develop and maintain comprehensive documentation of manufacturing processes, including standard operating procedures, work instructions, and quality control protocols., • Continuous Improvement: Identify opportunities for continuous improvement in manufacturing processes and implement changes to enhance overall performance., • Material Management: Collaborate with procurement and supply chain teams to ensure the availability of materials and components required for manufacturing., • Problem Solving: Proactively identify and address manufacturing challenges, troubleshoot issues, and implement effective solutions to meet project deadlines., • Compliance: Ensure that all manufacturing processes adhere to industry standards, safety regulations, and quality requirements., • Training: Provide training and guidance to manufacturing personnel to ensure proper execution of established processes and procedures., • Innovation: Stay informed about the latest advancements in manufacturing technologies and propose innovative solutions to enhance AVT Simulation's manufacturing capabilities.Adhere to all company policies, procedures, and business ethics codes.Other DutiesPlease note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for the job. Duties, responsibilities and activities may change at any time with or without notice.QualificationsMinimum Requirements, • Bachelor's degree in Mechanical Engineering, Industrial Engineering, or a related field., • Proven experience in manufacturing engineering, preferably in a technology-intensive or simulation industry., • Strong knowledge of manufacturing processes, quality control methodologies, and continuous improvement techniques., • Proficiency in CAD software and experience working with manufacturing simulation tools., • Excellent problem-solving skills and the ability to work collaboratively in a team-oriented environment., • Strong communication skills and the ability to convey complex technical information to diverse stakeholders., • Windows, • Microsoft Office (Word, Excel, Outlook, Project), • SolidWorks, • Autodesk, • Atlassian JIRA, • Atlassian Confluence, • JAMA Our Heritage: Founded in 1998 by an engineer, AVT Simulation is an Orlando-based, end-to-end systems integration and full-service modeling and simulation small business. Since our beginning, AVT's highly specialized staff of engineers has included some of the top leaders in the simulation industry. With an average of over 20 years of simulation experience, our dedicated staff provides specialized solutions for customers requiring on point solutions to complex problems. AVT has always been a company that strives to make a positive difference in the lives we touch. These lives include our employees and their families, our partner companies and their employees, and ultimately the warfighters receiving our products and services. Our core values are so very important to us as a company. They guide us towards success. They make us a great company to work for and a strong partner to work with. • People First, • Mission Excellence, • Do the Right Thing, • Commitment People First is our first and most important core value because we firmly believe the success of AVT is directly related to supporting our employees. We have a lot of fun (with regular employee events and engagements), while still working hard to accomplish our mission of serving our military and the warfighter. We’re looking for candidates that embody these core values, know how to have fun while working hard, and think they would thrive in an environment like ours. If you’re a self-motivated individual, then come join AVT. Come make your difference. EOE - Females/Minorities/Protected Veterans/Individuals with Disabilities/Sexual Orientation/Gender Identity Qualified individuals with a disability have the right to request a reasonable accommodation. If you are unable or limited in your ability to use or access our careers website as a result of your disability, request a reasonable accommodation by visiting and follow the instructions at the bottom. Powered by JazzHR bKx0n0wcmS

Job Description We are seeking 1–2 experienced Systems Engineers with a strong background in Model-Based Systems Engineering (MBSE) to support a next-generation constructive simulation program. This role offers the opportunity to work on advanced system architectures and play a key role in shaping the design and documentation of complex software-intensive systems. The ideal candidate is comfortable working in a model-driven environment, collaborating with cross-functional engineering teams, and translating system concepts into clear, structured architectural artifacts. Orlando-based candidates are preferred, but remote candidates will be considered for the right experience. Responsibilities • Develop and maintain MBSE models to support system architecture, design, and analysis, • Document software and system architectures, interfaces, and design artifacts, • Collaborate with software, systems, and stakeholder teams to ensure architectural alignment, • Translate requirements into logical, functional, and physical system models, • Support system design reviews and technical discussions using model-based artifacts, • Experience as a Systems Engineer working in an MBSE environment, • Hands-on experience using Cameo Systems Modeler / MagicDraw, • Strong understanding of systems architecture and design documentation, • Ability to clearly communicate technical concepts through models and documentation, • Experience with constructive or simulation-based systems, • Familiarity with DoDAF, SysML, or other architecture frameworks, • Prior experience working on next-generation or R&D-focused programs, • Ability to work independently in a remote or hybrid environment, • Experience collaborating with distributed engineering teams

Job Description H&H is offering an exciting opportunity for a Senior Traffic Engineer/ Traffic Modeler with five+ years of professional experience to be part of our transportation team. This position will provide traffic engineering capabilities in support of our Southern District operations, with potential for additional responsibilities in our growing southern regions including North Carolina, Louisiana, and Texas. The successful candidate will provide traffic signal design, traffic analysis, signing and pavement marking design, and assist with design efforts for the Transportation group. A strong background in Florida DOT and County design policies and procedures is preferred. With over 138 years of experience, H&H is a trusted full-service infrastructure engineering firm. Our clients, including infrastructure owners, contractors, and colleagues, rely on us for intricate and innovative engineering solutions. They trust our time-tested ability to manage the entire life cycle of a project, from the study and planning phase through to design and construction. With over 600 talented employees located across 30 offices nationwide, H&H can efficiently and effectively handle assignments of all sizes, types, and delivery methods around the country and across the globe. Responsibilities • Provide Traffic Signal, Signing and Striping Design and EOR duties on Signalization and S&PM Plan Sets, • Perform intersection and roadway capacity analyses using HCS, Synchro, and SimTraffic software and prepares traffic impact studies, • Oversee the creation of engineering documents, design reports, and variation/exception reports, • Provide support to local and regional offices within the company, • Coordinate plans, calculations, and specifications amongst multi-discipline engineering teams, • Perform internal quality control procedures, • Bachelor’s in Civil Engineering from an accredited four-year college, • Florida Professional Engineering License or ability to obtain, • PTOE certification a plus, • Minimum five years of experience, • Knowledge of FDOT plan preparation criteria and design standards, • Knowledge of other transportation disciplines and their relationship to traffic design, • Strong verbal communication and technical writing skills We offer a professional work environment, a competitive salary, benefits package and 401(k). EOE M/F/ DISABILITY/VETS

Job Description Mastech Digital provides digital and mainstream technology staff as well as Digital Transformation Services for all American Corporations. We are currently seeking a Controls Engineer - Amusement Park/ Theme Parks/Rides for our client in the Engineering Solutions domain. We value our professionals, providing comprehensive benefits and the opportunity for growth. This is a Permanent position, and the client is looking for someone to start immediately. Duration: Full-time Location: Orlando, FL Salary: $100,000-$120,000/Annually Role: Controls Engineer - Amusement Park/ Theme Parks/Rides Primary Skills: Engineering Role Description: The Controls Engineer must have 5+ years of experience. Key Responsibilities: Electrical System Design: • Lead the design process for electrical and control systems, starting from concept to full system design, ensuring compliance with project requirements., • Design electrical/control components using AutoCAD or similar drafting software, ensuring system integration across project disciplines., • Collaborate with facility design teams to optimize panel locations, minimize voltage drop, and design efficient system hardware layouts. System Integration & Risk Management: • Provide input for system integration across various project disciplines, ensuring seamless collaboration with mechanical, structural, and other engineering teams., • Manage vendor scopes, ensuring that safety, functionality, and contract requirements are met., • Conduct project technical risk assessments and implement mitigation strategies to reduce risks and ensure project success., • Design redundant systems and mitigations to improve safety, reliability, and system uptime. Control System Design & Safety Critical Components: • Design and analyze safety-critical parts within control systems, ensuring compliance with relevant codes and standards., • Implement systems for complex motion integration from automated systems, including ride system designs for attractions involving guest safety., • Develop detailed control system documentation, including description of operation, system design specifications, panel assembly drawings, network layout, test plans, and maintenance/job plans. System Calculations & Analysis: • Perform necessary design calculations and analysis, including short circuit protection, harmonics, noise reduction, load flow, power consumption, protective relay/circuit design, and ground fault monitoring., • Implement and design safety systems with knowledge of SIL/PL ratings (preferred)., • Conduct analysis on protective relays and circuit designs to ensure compliance and system safety. Project Support & Commissioning: • Support the installation and commissioning process, including working off shifts as needed during project installation phases., • Collaborate with the installation team to ensure the systems are implemented correctly and safely., • Oversee system testing and ensure all safety protocols are followed during start-up and commissioning. Job Requirements: Education: • Bachelor’s Degree in Electrical Engineering or a closely related field. (Candidates with degrees in other disciplines may be considered if they have directly related electrical engineering experience.) Experience: • 5+ years of experience in electrical/control systems design and integration, covering the majority of the responsibilities listed above., • Preferred experience in ASTM standards, the attractions industry, and safety engineering practices., • Experience working with major industrial manufacturers' hardware/software (e.g., Allen-Bradley, Siemens)., • Experience with Ethernet-based distributed remote I/O systems is a plus. Key Competencies: • Knowledge of contract documents and specifications, with the ability to collect field data and accurately record findings., • Strong planning, problem-solving, and decision-making skills, with the ability to prioritize and organize effectively., • Ability to design and implement systems that meet customer requirements while adhering to industry safety standards., • Ability to work in a multi-disciplined environment, interfacing effectively with engineers, designers, and drafters. Skills: • Proficiency in Microsoft Windows and Office environments., • Expertise in using AutoCAD (or similar drafting software) for system design., • Strong communication skills, both oral and written, to effectively interact with project teams, vendors, and clients. Other Requirements: • Ability to travel up to 30% (with travel being 10% for the last couple of years of projects)., • Physical demands include vision (color perception), hearing, clear speech, dexterity in hands, driving, lifting, climbing, and ability to mount and dismount equipment., • Must be comfortable working in varied environments, including standard office settings, on-site project locations, and industrial/construction environments. Education: Bachelor’s Degree in Electrical Engineering or a closely related field. (Candidates with degrees in other disciplines may be considered if they have directly related electrical engineering experience.) Experience: Minimum 5+ years of experience Relocation: This position will not cover relocation expenses Travel: Travel up to 30% (with travel being 10% for the last couple of years of projects). Local Preferred: Yes Note: Must be able to work on a W2 basis (No C2C) Recruiter Name: Devyanshu Pawar Recruiter Phone: 412-490-7931 Benefits: This is a direct hire position, and the hired applicant will receive our client’s benefits package. Mastech Digital is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Job Description Azure Engineer plays a key role in the design, development, and management of our Azure infrastructure. This position is responsible for managing, maintaining, and enhancing Azure public cloud environments. The ideal candidate will have hands-on experience in provisioning and troubleshooting Azure infrastructure resources, as well as strong skills in identifying and resolving complex issues efficiently and professionally. In this role, the Azure Engineer will contribute to building new environments for our cloud customers and ensure that these environments are developed and maintained for high availability, scalability, and ease of maintenance. Collaboration with customers will also be an important part of the job, particularly when scheduling maintenance windows and coordinating change management activities. Pod: Azure Delivery Leader: Cloud Implementation Leader Location: Tampa, FL (hybrid), US (remote), Poland (remote), Ukraine (remote) Working Schedule: EST office hours All new hires in North America complete in-person onboarding at our Tampa office, which typically lasts 3 to 5 days. Responsibilities: • Implement, support, and maintain 24x7 Azure CSP environments, RDS deployments and Windows technologies., • Make ongoing recommendations of Azure and Windows policies and standards – strategic planning., • Manage multiple large-scale projects in a fast-paced challenging environment and provide leadership to other members of the team., • Quickly convert business problems into technical solutions and opportunities., • Resolve Azure, Windows, and RDS escalations from clients and other team members., • Collaborate with customers and team members to troubleshoot and resolve issues., • Maintain and prioritize incidents, ensuring timely resolution., • Manage configuration and deployment of Azure resources in compliance with established technology policies., • Recommend technical solutions that will enhance performance, increase redundancy, and add flexibility to the existing infrastructure., • Troubleshoot Azure and Windows performance issues., • Maintain system availability and monitoring of critical services., • Maintain appropriate relationships with 3rd party vendors and evaluate vendor software, and communications products to provide recommendations to leadership., • Regular participation in change control activities that comply with ITIL change management., • Establish upgrade and backup strategies for core infrastructure., • Participate in on-call rotation as needed., • Experience:, • 4+ years' experience implementing and supporting Azure, Windows, and RDS technologies., • Technical Knowledge:, • Extensive knowledge of Windows technologies: RDS, IIS, GPO's, Active Directory., • Working knowledge of NetScaler Load Balancing solutions and Azure networking., • Working knowledge of Microsoft CSP program and Lighthouse., • M365\SharePoint support and implementation., • AVD support and implementation., • Powershell\Automation experience., • Experience with ASR/DR testing and failovers., • AZ-104 certification., • Working knowledge of M365 infrastructure and management., • Positive attitude, enjoy challenging solutions involving Azure, Citrix and Window architecture and maintenance., • Analytical Skills:, • Strong data analysis and reporting skills, with the ability to create and interpret sales KPIs., • Initiative-taker who can work independently on complex issues., • Ability to coordinate multiple tasks simultaneously., • Demonstrated capability to achieve results under pressure., • Communication:, • Fluent in English, • Demonstrates communication and interpersonal skills, with experience building relationships across teams. ABOUT ENAVATETransforming Businesses and the Lives They Touch At Enavate, we are more than just a Microsoft Gold Partner—we're a trusted partner in Enterprise Resource Planning (ERP) consulting, Cloud services, and managed services. We help businesses embrace the future by guiding them through ERP implementations, migrations to the cloud, and integrations that streamline their operations, allowing them to thrive in an ever-evolving business landscape. Our work isn't just about technology—it's about transforming the way businesses operate, empowering them to grow, innovate, and succeed. By partnering with our clients, we provide peace of mind, enabling them to focus on what matters most while we handle the complexity of their systems and processes. To learn more about what we do and how we make an impact, please check out our "What We Do?" 1-pager. Our Culture Whether you're joining us in North America, Europe, or beyond, Enavate offers a dynamic and collaborative environment where you'll have the opportunity to make a real impact. At Enavate, we're driven by our core values, and our people are at the heart of everything we do: • Team Members: We take care of our own., • Innovation: We explore, evolve, and seek excellence at every level., • Results: We are achievers who set high goals and reach them. To gain a deeper understanding of our values and the environment we foster at Enavate, take a look at our "Enavate Culture" Guide. What We Offer At Enavate, we're committed to providing a supportive and rewarding environment that empowers you to thrive both professionally and personally. Here's a glimpse of the benefits and perks you'll enjoy as part of our team: For more details about the benefits available in your region, check out the following links: • USA Benefits Guide, • Europe Benefits Guide We prioritize hiring candidates who are based in or near these locations. For team members based in Tampa and Fargo, we encourage team members to spend at least three days per week in the office to foster collaboration, connection, and contribute to our vibrant team culture. All North American new hires are onboarded in person at our Tampa office. Onboarding typically lasts 3 to 5 days, depending on the role, and provides a dedicated opportunity to connect with your leader, teammates, and our company culture. Our Hiring Process At Enavate, we take a thoughtful approach to hiring that ensures a great fit for both you and us. Our process includes: • Intro Call – A brief conversation to get to know you, discuss your background, and determine if there's a mutual fit., • Predictive Index Assessment – We use the Predictive Index to understand your natural strengths and how they align with the role and our team dynamics., • Interviews – A combination of technical and cultural interviews, focused on your expertise, problem-solving abilities, and alignment with our core values., • Debrief – Our team will come together to discuss your fit for the role and next steps. Enavate is an Equal Opportunity employer. This commitment applies to all candidates and employees regardless of race, ethnicity, citizenship, creed, place of origin, religion, sex, gender identity, gender expression, sexual orientation, family status, marital status, disability, age, and any other protected characteristic. Accommodation requests can be made at any stage of the recruitment process, and during employment by contacting our Talent Acquisition team. Join Us in Our Mission! At Enavate, we believe in transforming businesses and the lives they touch – because to us, it's personal. If you're ready to make an impact, we invite you to be part of a team that listens, challenges, collaborates, and takes action. Together, we're reshaping the future of ERP and how businesses operate, offering fresh perspectives and innovative solutions. Are you ready to transform your career and help us shape the future? Enavate is the place for you.

Job Description Xometry (NASDAQ: XMTR) powers the industries of today and tomorrow by connecting the people with big ideas to the manufacturers who can bring them to life. Xometry's digital marketplace gives manufacturers the critical resources they need to grow their business while also making it easy for buyers at Fortune 1000 companies to tap into global manufacturing capacity. Xometry is seeking highly motivated Mechanical Engineers to act as customer-facing Technical Account Managers (TAMs). These TAMs will be embedded within our most strategic accounts, acting as an extension of their engineering teams. This role is a unique blend of customer engagement, technical expertise, and operational execution. TAMs will report into Operations but will work very closely with Sales to drive growth and ensure customer satisfaction. This is a unique opportunity to join a dynamic and growing company at the forefront of digital manufacturing. If you are a highly motivated Mechanical Engineer with a passion for customer success and a desire to make a real impact this is the role for you. Responsibilities: Customer Integration: • Become a trusted advisor and technical expert for assigned enterprise accounts, • Weekly onsite visits at customer and partner locations, building relationships and understanding their needs, • Collaborate closely with customer engineers on Design for Manufacturing (DFM) to optimize projects for Xometry's platform, • Proactively identify and address potential manufacturing challenges, • As customer projects are awarded to Xometry, ensure orders are directed to the most qualified manufacturers within our network, • Conduct monthly on-site audits of manufacturing partners to ensure they meet Xometry's quality standards and customer specifications, • Manage projects to successful completion, overseeing production, and ensuring on-time delivery, • Handle critical communications, order changes, and escalations related to customer orders, • Partner with Enterprise Sales Executives to drive account growth and retention, • Identify opportunities for expanding Xometry's services within existing accounts, • Provide technical expertise and support during the sales process, • Bachelor's degree in Mechanical Engineering or a closely related field such Aerospace Engineering, Product Design/Development, or Industrial Engineering is required, • 7+ years of experience in manufacturing, product development, and project management, • Experience in the aerospace industry is highly preferred, • Strong understanding of manufacturing processes and DFM principles, particularly as they apply to CNC applications, • Experience in CNC Machining, Tube Bending, Composites, or 3D printing is preferred, • Proficiency in modelling and drafting software such as Solidworks, • Excellent communication, interpersonal, and problem-solving skills, • Experience with CRM systems such as Salesforce, • Proficiency in Google Suite and Microsoft Office Suite, • Ability to travel to customer and partner sites up to 50%, travel could be short notice and range from short day trips to multi-day trips #LI-Remote Xometry is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. For US based roles: Xometry participates in E-Verify and after a job offer is accepted, will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.

Job DescriptionSalary: Great - TBD Location: Remote (US) | East/Central Time PreferredExperience Level: Senior (5+ Years)The Profile: Strategic Hunter / Technical Consultant / Network Leverager The Opportunity: Monetize Your Network with the Future of Tech At Iserv (), we are bridging the gap between robust MSP infrastructure and the AI revolution. We are seeking a Senior Account Executive who has "been there and done that" in the SaaS, CCaaS, or Telecom space. You aren't looking for a training ground; you are looking for a vehicle to deliver high-value, transformative solutions to the network you have spent your career building. This role requires a unique hybrid of skills: You possess the technical autonomy to scope a complex Voice AI opportunity independently, and the executive presence to guide C-Level leaders through a digital transformation. Who You Are (The Senior Hybrid) • You Have a "Rolodex": You have spent years selling into the Mid-Market or Enterprise space. You have existing relationships with decision-makers (Ops Leaders, IT Directors, CX VPs) who trust your advice. You won't be starting from zero., • You are the "Technical Captain": You dont need a Sales Engineer to hold your hand for the first three meetings. You can confidently whiteboard call flows, discuss API integrations for CRMs, and scope the necessary bandwidth requirements on your own. You leverage Engineering only for the final validation., • You Sell Outcomes, Not Specs: You dont pitch "VoIP features." You pitch Business Continuity, Speed-to-Lead, and Operational Efficiency. You are a consultant first, a salesperson second. What You Will Sell & Scope 1. The Transformation (Voice AI & Automation) • High-Value Use Cases: You will identify opportunities within your network to deploy:, • Speed to Lead: AI agents that qualify inbound web leads in seconds., • Appointment Setting: Automating scheduling for Healthcare/Service organizations via EMR/CRM integrations., • Virtual Chief of Staff: Intelligent routing that replaces clunky phone trees., • "Human-in-the-Loop": Designing workflows where AI handles the scale, and humans handle the nuance. 2. The Infrastructure (The Foundation) • Connectivity & Security: You know that a Ferrari engine (AI) needs a race track. You will scope and sell the SD-WAN, Managed Fiber, and Cyber Security required to make the AI solution stable and secure. Key Responsibilities • Leverage Your Network: Activate your existing relationships to generate immediate pipeline. You know who needs this technology and you know how to reach them., • Technical Scoping & Discovery: Lead the architectural discussion. You act as the primary "Solution Architect" during the sales cycle, mapping out how our AI agents will integrate with their current tech stack., • Executive Presentation: Translate complex technical capabilities into clear financial ROI for CFOs and Business Owners., • Close Complex Deals: Navigate multi-stakeholder sales cycles, manage contract negotiations, and secure the win. Requirements • 5+ Years of SaaS/Technology Sales: Deep experience in CCaaS, UCaaS, AI, or Complex MSP Sales., • Proven Network: You must demonstrate that you have an active network of potential buyers. We are looking for a "Rolodex" hire., • Technical Independence: You must be comfortable diagramming workflows (Visio/LucidChart) and discussing integrations without immediate engineering support., • Strategic Mindset: You are used to selling five and six-figure deals that involve organizational change, not just a software license. Why This Role? • Sell the "Next Big Thing": Your network is tired of hearing about generic software. Bring them something that solves their labor shortages and efficiency gaps: AI Automation., • Dual Compensation: Earn on the high-margin AI Professional Services/Licensing and build long-term wealth through recurring commissions on the Managed Infrastructure (Connectivity/Security)., • Autonomy: We trust your experience. You will have the freedom to run your sales cycles your way, supported by a world-class delivery team.

Job DescriptionBenefits: • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off Growing Ocala, FL based, publicly traded construction company is looking for a LEAD relay technician (with 10+ years of experience) and a SENIOR relay technician (with 7+ years of experience.) The ideal candidate will be able to: Apply / exhibit a high attention to detail with regard to safety and human performance. Conduct thorough prejob briefings at the beginning of each workday, and as needed throughout the day as conditions warrant. Perform relay panel risk assessments daily and apply human performance barriers as needed. Develop functional guidelines with an emphasis on human performance principles. Relay Technicians must garner and maintain NERC certifications for access into NERC CIP control houses. Maintain and control proper use of Duke Energy issued TCA secure laptop. Review construction prints, make corrections as needed, confirm schemes will function properly. Work with Duke Energy RCE and RCI and the Relay Design Engineering to resolve any problems with the protection and control schemes. Apply approved LV control cable and fiber optic safe work practices. Review all protective relay settings as issued. Working with RCE, RCI and the Relay Settings Engineer to resolve all problems with the relay logic and protection settings. Review the SCADA point assignment sheet as issued by the Energy Control Center. Work with the Senior Engineering Technical Support Specialist to resolve any conflicts between the relay logic settings and the RTU (remote terminal unit) settings and any other supervisory control issues. Oversee the inventory of all relay material issued to the project. Order all missing items through the RCI and Material Coordinator. Direct and oversee all aspects of the mounting and wiring of relays, termination racks, cabling from panel to panel, and termination of all cables by wiremen or electricians. Relay technicians will inspect wiring of all high voltage yard equipment as wired by others. Quality control is provided at the time of this construction by the lead or senior relay technician on the job. Provide on-site support to other departments (Substation, Production. Telecomm, etc...), such as proper direction and placement of high voltage circuit breakers and power transformers. Review and correct as needed, the Substation Operating Instructions as issued by Relay Engineering personnel. Coordinate with others to schedule and sequence each phase of all electrical projects. Knowledgeable in providing and keeping relay protection to all HV equipment throughout the duration of the project. This may require temporary relay settings, wiring, etc... Test CT's of high voltage equipment for ratio, polarity, saturation and meggar insulation tests. Apply relay settings, test and calibrate all relays using calibrated relay test equipment and Enoserv RTS software program. All as-left relay testing documentation will be saved and submitted to RCE. Create and install proper labeling on all panels. Order labels for exterior junction boxes and switch handles. Verify proper wiring of all potential and current circuits from the instrument transformer to the end element device. Relay technicians should have fiber optic splicing and termination abilities with CFOT certification. Relay Technician must be capable of testing all HV apparatus such as power transformer sudden pressure schemes, Power line Carrier line tuner, wave traps and transceivers. Verify transformer and breaker alarms function properly from the equipment terminal blocks, into the control house. Check for local indication, as well as, to the Energy Control Center Functionally test all relay and control circuits to verify proper operation during simulated fault conditions. Confirm proper operation of all new equipment via SCADA by working with System Protection and Control Technicians at the Energy Control Center. Coordinate and schedule with Dispatchers and Substation Construction personnel to energize new equipment. When equipment is energized for the first time, perform, or confirm electrical phasing of new lines or equipment. Take In-Service readings of all new equipment as primary load is first applied. Leave a complete corrected set of relay drawings at the Substation. Turn in a corrected set of red lined drawings to RCE for Relay Design redrafting. Sign and turn in all documents (settings, in-service sheets, CTR sheets, substation operating instructions, point assignment sheets) to the RCI or RCE or appropriate person. Schedule meetings with maintenance personnel to inform them of new equipment, schemes, and answer any questions they may have. Schedule a meeting with the project engineers, if needed, to go over lessons learned. Oversee the documenting of all excess items and schedule a pick-up of this excess material to be returned to the storeroom for credit. Pay Rates: $55-62/hr for senior with 7+ years of experience , $65-77/hr for lead with 10+ years of experience

Job DescriptionDescription: As our Lead Software Engineer, you will own the architectural vision and technical strategy for the entire Stax mobile ecosystem. This is a hands-on role for a leader passionate about user experience and cutting-edge technology. You will not only develop our core apps, SDKs, and device integrations, but also mentor a talented team, empowering them to build solutions that are critical to our business goals. Key Responsibilities & Objectives • Architect, develop, and maintain Stax's core mobile product offerings, including the 'Stax Pay' apps (iOS/Android), public-facing payment SDKs (Kotlin/Swift), and payment terminal integrations., • Act as the key technical partner for product teams to architect and deliver new features across our mobile, card reader, and terminal platforms., • Drive integrations with Android-based hardware devices and ensure seamless performance across environments., • Enhance and support mobile-centric technologies including tokenization scripts, backend services, and terminal customizations., • Define and champion the coding standards, architectural patterns, and best practices that ensure quality and consistency across all mobile development., • Mentor and guide engineers across teams on mobile platform technologies and SDK usage., • Maintain and continuously improve developer documentation for SDKs and integrations., • Translate business requirements into technical specifications, collaborating with product managers and external partners to define roadmaps and ensure alignment., • Own the end-to-end mobile app distribution process, from publishing and updates to managing all interactions with the Apple App Store and Google Play Store review teams.Requirements:, • Bachelor’s degree in Computer Science or equivalent practical experience., • 7+ years of professional mobile development, with deep expertise in Android (Kotlin) or iOS (Swift) and strong proficiency in the other., • 3+ years of experience working on a mobile product that served at least tens of thousands of weekly active users., • A minimum of 2 years in a technical leadership role (e.g., Project Lead, Senior Engineer with mentorship duties) overseeing complex, multi-layered mobile projects., • Experience leading or mentoring teams in SDK and mobile platform development., • Track record of managing widely distributed SDKs with versioning, backward compatibility, and developer adoption in mind., • Familiarity with mobile app distribution processes and review team interactions for both Apple App Store and Google Play Store., • Experience managing platform-specific capabilities that cross-platform frameworks cannot fully support, such as Bluetooth permissions, networking, background services, push notifications, and secure storage., • Strong expertise with at least one mobile package manager (e.g., Cocoapods for iOS or Maven Central/Gradle for Android) to support SDK commercialization and distribution., • Proven ability to foster a collaborative and supportive team environment through empathetic leadership, mentorship, and constructive feedback, as demonstrated by professional references from former colleagues., • Strong problem-solving skills and demonstrated ability to work across diverse technologies. Preferred Qualifications • Experience integrating with Android-based payment terminals (e.g., Dejavoo, Verifone)., • Background in FinTech or payments technology., • Familiarity with Cocoapods, CI/CD pipelines (Gradle, Fastlane), and Firebase (e.g., push notifications)., • Familiarity with mobile testing frameworks and developer experience tooling., • 2+ years of experience with frontend or backend JavaScript/TypeScript applications. Why You’ll Love Working at Stax • Impact: You’ll be at the heart of our mobile strategy, building technology that directly empowers merchants to run their businesses. This is a highly impactful and meaningful domain, as our product is core to the day-to-day operations of our users., • Growth: We're committed to your professional development with opportunities to learn new technologies and take on greater leadership responsibilities., • Culture: Join a collaborative, innovative, and supportive team that values curiosity and a passion for building great software.

Job Description Ardurra is seeking a Transportation Engineer I to join our team in Orlando, FL location! Our Transportation team offers design capabilities ranging from complex multilevel interchanges to urban arterial reconstruction to complete streets for our clients. Primary Function: Under general supervision, performs assignments of limited scope which require the application of standard techniques, procedures, and criteria in carrying out a sequence of related design engineering tasks. Assignments involve some unusual or difficult problems requiring job knowledge and abilities beyond entry level. Primary Duties: Ardurra is seeking highly motivated individuals to join our transportation team in the role of Engineer I. In this role you will have the opportunity to work under the supervision of outstanding seasoned professionals on exciting and challenging projects that improve the quality of life in our communities. Your primary duties may include: • Assist Project Engineers in the design and development of roadway and highway construction contract plans using the latest CADD software, including MicroStation and OpenRoads Designer., • Assist in the identification of construction pay items and computation of quantities and opinions of costs., • Assist in the preparation of construction specifications and specification packages., • Develop and analyze feasible design alternatives comparing parameters, such as typical sections, horizontal and vertical alignments, right-of-way requirements, impacts on existing utilities, constructability, and construction cost., • Perform standard computations and analysis and research assignments., • Attend design meetings and coordinate with team members., • Prepare letters, memorandums, reports, spreadsheets, power point presentations, and project schedules., • Bachelor of Science degree in Civil Engineering from an ABET accredited institution., • Engineer Intern Certification or ability to obtain within 6 months from date of hire., • 0-2 years of experience. While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-HJ1

Job Description Senior Architectural Draftsman Company: AB Design Group Location: Longwood, FL (100% On-Site) About us AB Design Group is a well-established architectural firm specializing in residential builder-series production homes, including single-family homes, townhomes, and condos. The studio also completes select light commercial projects and supports some of the area's leading home builders in a fast-paced, collaborative environment. Position overview AB Design Group is seeking an experienced Senior Architectural Draftsman focused on producing high-quality, buildable construction documents for residential builder clients. This fully in-office role is best suited for a proactive, detail-oriented technical professional who excels in drafting, coordination, and resolving plan and field issues. Key responsibilities • Develop complete, code-compliant Construction Documents for single-family and multi-family residential projects, including architectural and basic structural plan components., • Interpret and implement redlines from architects, project managers, engineers, and clients with a high level of accuracy and consistency., • Coordinate with outside consultants and trades (Structural Engineer, Truss Company, MEP, etc.) to incorporate their drawings, specifications, and revisions into the CD set., • Review drawings for quality control, constructability, and consistency across plan series, elevations, and options., • Prepare, update, and maintain permit-ready plan sets and respond to Building Department comments with clear, coordinated revisions., • Provide technical drafting support during construction, including revisions for field conditions, required repairs, and builder-requested changes., • Maintain organized digital files, drawing standards, and sheet setups to support efficient production and quick plan turnaround., • 5–8 years of architectural drafting experience in an architectural firm, with a strong background in residential construction., • Extensive experience preparing and editing Construction Documents in a production-home or similar environment., • Light commercial drafting experience is a plus but not required., • Proficient in all stages of Construction Document creation and review, from schematic layouts through permit-ready sets., • Associate or bachelor’s degree in Architecture, Drafting, Construction, or a related field (preferred, not required)., • Working knowledge of current Florida Building Code and related standards (Accessibility Code, NEC, etc.)., • Strong written and verbal communication skills, including the ability to document revisions and respond to internal and client emails clearly and professionally., • Competitive salary commensurate with experience., • Partially Subsidized health insurance: Medical, Dental, Vision., • Paid vacation, PTO, and holidays., • 401k plan with company match., • Company-paid Life Insurance policy, • Long-term disability insurance., • Opportunities for professional growth into project lead or management roles for qualified candidates.

Job Description POSITION SUMMARY: he Manufacturing Engineer will report to Manufacturing Engineering Manager and will provide technical expertise necessary to design, develop and implement manufacturing systems, processes and tooling required to support plant production activities. Job Duties and Responsibilities: • Develops test and manufacturing processes, • Develops various assembly processes, including pick and place, dispensing, and soldering, • Uses engineering tools and statistical concepts to maintain and improve processes, • ·Investigates process problems and initiates corrective actions, • Generation of production level documentation and procedures, • Specifies and initiates purchase of manufacturing tools, equipment, and supplies, • Plans, specifies, and justifies capital equipment expenditures, • Lead product and/or process improvement teams, • Designs and develops test systems and electronic systems to support the testing and construction of Mtron products., • Works closely with cross-functional engineering groups performing concurrent engineering, • Familiarity of electronic design of test fixtures and systems is required., • Hands on position requiring interaction among multiple disciplines within Mtron., • Familiarity with multiple software applications such as Microsoft Word, Excel, and Power Point is required., • Use of AutoCAD, Solidworks, Minitab and Microsoft AX is preferred., • Bachelor’s degree in Electrical Engineering from an accredited University., • All applicants will be reviewed. Preference will be with those having > 3 years of engineering experience within a manufacturing site., • Must handle ITAR documents without needing licenseCompany DescriptionMtron designs and manufactures high-performance, highly reliable RF components for demanding applications in space, avionics, aerospace, defense, and more. With full vertical integration, from materials science to final manufacturing, we support critical systems like satcom, radar, electronic warfare, and test equipment. Headquartered in Orlando, Florida, we operate globally with facilities in North America, India, and Asia. We are guided by our core values of Integrity, Respect, Innovation, and Collaboration.Mtron designs and manufactures high-performance, highly reliable RF components for demanding applications in space, avionics, aerospace, defense, and more. With full vertical integration, from materials science to final manufacturing, we support critical systems like satcom, radar, electronic warfare, and test equipment. Headquartered in Orlando, Florida, we operate globally with facilities in North America, India, and Asia. We are guided by our core values of Integrity, Respect, Innovation, and Collaboration.

Job DescriptionCompany Description At Coffman Engineers, we serve as both prime consultant and sub consultant on projects large and small, including commercial, retail, institutional, government, industrial, and project/construction management. Incorporated in 1979, we have employees in more than 23 locations serving clients across the United States and overseas. To meet client objectives and to integrate our many disciplines, we can create teams comprised of civil, structural, mechanical, electrical, fire protection, and corrosion control, as well as project/construction managers and professionals in a variety of specialty services. This ability has made us a leader in the engineering and construction communities, and has strengthened our reputation as being progressive, innovative, and a great place to work. Job Description Coffman Engineers is seeking a Senior Structural Engineer with ten to fifteen years of experience for our Orlando, Florida office. challenging and rewarding opportunity within a dynamic and progressive firm. The successful individual will work closely with our business development team and other discipline leaders in developing technical proposals and will take a proactive role in marketing/business development. This role provides the opportunity to help build and mentor a dedicated team of engineering professionals within a collaborative multidiscipline office. This candidate will be working directly with clients providing consulting services. The ideal candidate will have experience in the design of steel, concrete, and masonry commercial/institutional, federal and Industrial buildings, both in new and existing construction, utility infrastructure, roadways, erosion control measures and coordinating multifaceted projects. We are seeking innovative, results-oriented individuals who value high standards of performance and collaborative teamwork. Qualifications Essential Engineering Skills and Functions: • Perform the following functions:, • structural analysis, design, and detailing on a variety of commercial & industrial projects, • Design of steel, concrete, and masonry commercial/institutional, federal and Industrial buildings, both in new and existing construction., • Design experience with light gage steel and timber is a plus, • Strong ability to interpret technical drawings, • Lead design team efforts, • Manage project team for budget and schedule control, • Develop fee and qualification-based proposals, • Collaborate with the architect, owner, and contractor to provide a well-coordinated and high-quality set of structural drawings., • Able to multi-task and prioritize in a fast-paced environment., • Possess strong critical thinking, organizational, and analytical abilities., • Maintain positive working relationships with internal and external customers., • Proficiency in Microsoft Outlook, Word, Excel and PowerPoint software preferred. Must understand database concepts. Working knowledge of marketing databases and proposal resources files., • Conduct marketing/business development activities, • Positive contributor to overall office and department goals, culture, and morale., • Ability to travel, • B.S. degree in civil engineering from an ABET accredited program required., • Registration as a Professional Engineer (PE) or Structural Engineer (SE)., • 10 to 15 years of structural engineering experience., • Experience with computer software programs and analysis systems (such as RISA, AutoCAD, Revit, RamSS, Etabs, Enercalc, etc.)., • Excellent verbal, written, organizational, and time management skills., • Project Management experience and/or certifications, • Desire to lead inter-disciplinary projects and project teams, • Local AHJ experience and relationships is a plus, • Salary will be determined based on qualifications and relevant experience., • Paid overtime at 1.0 times hourly rate, • Competitive end-of-year discretionary bonus based on company/team/personal performance, • Hybrid Work Schedule (subject to change) Additional Information Why You Want to Work Here You could choose to work anywhere, so why work at Coffman Engineers? Because we are different – our culture sets us apart. Simply stated, we are a group of creative, high-performing people who like working together and believe that what we do makes a difference. Employees say that it feels like working with a group of friends in a small office while enjoying the benefits and perks of working for a large firm. Our culture isn’t the only thing that makes us different, but it drives everything we do. Coffman offers comprehensive benefits, including a flexible PTO program and a fun environment with family-friendly policies. We support and encourage individually tailored professional and technical advancement as well as personal growth. Don't take our word for it. Check out what others are saying: Coffman at a Glance: • 45 years in business, • 850+ employees serving clients throughout the U.S. and overseas from more than 23 locations, • Multidiscipline engineering services plus corrosion control, commissioning and project/construction management, • 70+ employees in 9 offices, providing Fire Protection services since 2014, • #34 Top 80 Engineering Firms, Building Design + Construction, 2022, • #29 Zweig Group Hot Firm List, Zweig Group, 2021, • #161 Top 500 Design Firms, Engineering News-Record, 2023 Applying You must apply online for this position. If you are unable to complete our online application process, or if you need assistance to do so, let us know and we will provide reasonable accommodation. If you are experiencing problems applying through our system, please try using a different browser or an updated version of your current browser. If that doesn't work, please contact us directly. This position is direct with Coffman Engineers; we are an Equal Opportunity Employer. We do not discriminate on the basis of any status protected under federal, state, or local law. Follow us! Twitter: @CoffmanEngineer Instagram: @CoffmanEngineers LinkedIn: Facebook: @CoffmanEngineers

Job DescriptionDescriptionCPH is a multi-disciplined Engineering and Architectural design firm that ranks in the nation’s Top 500 Design Firms by ENR Magazine. Are you an entry-level engineering professional or recent graduate with internship experience? This might be a fantastic position for you to advance your passion in the civil space! This is a great opportunity to join a dynamic and highly collaborative team. CPH has an opening in our Orlando, Florida office location for the following position: • Project Engineer (EIT/EI) – Civil/Facilities What You'll Do:--Primary Duties-- • Preparation of design plans, specifications, and reports for a variety of water/wastewater and stormwater projects which may include transmission, distribution, collection, treatment, storage, utility master planning, permitting and various engineering tasks., • Hydraulic modeling including stormwater pre/post and advanced treatment and storage design along with water and sewer pumping systems and hydraulic water distribution modeling., • Ability to successfully interact with various public and private clients and other jurisdictional agencies., • Performing assignments requiring application of standard techniques, procedures and criteria to carry out engineering tasks. Assignments are designed to further develop judgment and understanding of professional and ethical responsibilities., • Review of design plans and comparison to accepted municipal standards and details., • Preparing engineering related calculations and develop drawings and visual aids., • Working on a wide range of projects and tasks and assist with field research, data collection, data analysis, graphics, maps and data presentation, and report development., • Management of time and workload to stay on schedule and within budget., • Bachelors or Master’s Degree in Civil Engineering or related focus., • E.I Certificate preferred or eligible and scheduled for FE exam., • Detail-oriented individual with strong technical and organizational skills, • Proficiency in spreadsheets, word processing and standard office software., • Works well in multidisciplinary team environments and ability to meet deadlines., • Strong oral presentation and written communication skills., • Experience with AutoCAD, Civil3D, WaterCAD, ICPR and other modeling software is preferred., • Dependent upon experience., • CPH offers Medical, Dental and Vision and Long-Term Disability with a quality insurance company., • Company Paid Life Insurance and Short-Term Disability., • 401K, Paid Personal Time Off, Paid Holidays, and Paid Parental Leave.CPH is an Equal Opportunity/Affirmative Action/Drug Free Work Environment Employer.

Job Description WHY HILLPOINTE? Hillpointe is a fully integrated real estate development and investment management firm focused on developing market-rate workforce housing across the Sun Belt. Ranked at the top of NMHC's list of Builders and Developers, our team ensures best-in-class execution. Built on its long and proven track record of real estate development, the firm's investment approach is centered around its in-house general contracting expertise, enabling direct control of cost and delivery timeframe. For each project, Hillpointe directly controls land acquisition, land development, construction, procurement of building materials, asset management, and capital markets. This is more than just a job - it's a career-defining opportunity! At Hillpointe, you'll be part of a dynamic, innovative team that has tangible impacts on day-to-day operations and contributes directly to overall success. Director of IT The Director of IT will lead the internal IT function and own our Microsoft tenant end-to-end, working closely with business leaders to develop, implement, and optimize secure, scalable technology across corporate, onsite property management, call center, and construction teams. The individual will be responsible for managing IT support, continuing to build out a Tier 1 helpdesk, and adapting systems and workflows to keep pace with the organization's growth. This role will enhance cybersecurity practices, govern vendor relationships and costs, transition hardware/software inventory to ServiceNow, and align identity lifecycle to Entra ID integrated with UKG, so we can see each employee's equipment and software during onboarding and ensure proper recovery and license removal during offboarding. We run a tight group, and this leader must be strategic and hands-on, ready to jump in with tickets, equipment provisioning (including Intune/Autopilot and Dell factory provisioning), and incident response. The Director will also guide a new Network Engineer/Cybersecurity team member on best practices. Key Responsibilities IT Infrastructure Management: • Analyze and optimize IT infrastructure and systems performance to align with the fast-paced needs of the business., • Develop scalable endpoint and network standards and Intune/Autopilot provisioning patterns (with Dell OEM/factory support) that enable direct-to-user deployment and consistent security baselines., • Develop and implement a comprehensive cybersecurity strategy to protect data, identities, endpoints, email, and networks., • Identify and remediate risks and vulnerabilities, implement secure configurations, and lead ongoing awareness training., • Operate and tune Microsoft Defender XDR and Microsoft Sentinel, define incident response playbooks, and oversee investigations and post-incident reviews., • Lead the creation and management of a Tier 1 helpdesk to support ERP / line-of-business applications and core productivity tools., • Establish SLAs, escalation paths, a major incident framework, and knowledge management., • Own all third-party vendor relationships - negotiate terms, track costs, renewal dates, and named users, and drive continuous improvement in service quality and price., • Maintain a central vendor catalog and entitlement register (licenses, contracts, device warranties, carrier circuits)., • Develop and manage the IT budget, including cloud subscriptions, Microsoft licensing, hardware refresh, carrier services, and tools (ServiceNow, security)., • Collaborate with leadership to align IT strategy to growth and operational priorities., • Use capacity planning, telemetry, and KPIs to ensure infrastructure, endpoints, service desk, and security functions scale effectively., • Perform regular IT and security audits against policy and industry frameworks; maintain remediation backlogs with due dates and evidence., • Administer and support the Microsoft 365 suite (Exchange, Teams, SharePoint, OneDrive, Power BI, Planner) and govern Power Platform (Power Apps/Automate) including environments, DLP, connectors, and lifecycle., • Serve as primary owner of the Microsoft tenant, responsible for Entra ID (identity governance, SSO, Conditional Access, MFA, PIM), Intune (Windows / iOS / iPadOS / Android), Security & Compliance (DLP/Retention/Records/eDiscovery), and Secure Score improvements., • Implement joiner-mover-leaver automation with Entra ID Lifecycle Workflows integrated with UKG to:, • Create/disable accounts, assign/revoke licenses, and manage group / Teams access., • Assist on the 2026 rollout of ServiceNow CRM, followed by Helpdesk / ITSM (incidents / requests / problem / change) and IT Asset Management (HAM / SAM) replacing our current inventory and asset tracking platform, Asset Panda., • Stand up CMDB relationships, lifecycle states, tagging/barcoding, stockrooms/RMA, and software entitlement tracking with usage insights for cost recovery., • Establish standard images / profiles and Autopilot configurations; leverage Dell factory provisioning for direct-ship devices with minimal IT touch., • Implement and govern ServiceNow ITAM for hardware (HAM) and software (SAM), with a clean CMDB, lifecycle workflows, and periodic inventories., • Experience supporting property management, leasing, maintenance, access control, and property network/connectivity needs., • Bachelor's degree in Information Technology, Computer Science, or related field; Master's preferred., • 10+ years of progressive IT experience with 5+ years in leadership, combining strategy with hands-on execution., • Demonstrated ownership of a Microsoft tenant (M365/Entra ID/Intune/Security & Compliance) and working Azure administration., • Strong, practical experience with Intune/Autopilot, Dell OEM/factory provisioning, and endpoint security baselines., • Proven success deploying ServiceNow (ITSM / ITAM / CMDB; CRM a plus) and migrating from Asset Panda or similar to ServiceNow ITAM., • Experience leading ERP programs, preferably Microsoft Dynamics-including integrations, data migration, and change management., • Depth in cybersecurity program management, EDR / SIEM operations, incident response, vulnerability management, and network security., • Experience building Tier 1 helpdesk teams, SLAs, major-incident practice, and knowledge management., • Strong vendor and contract management, budgeting, and cost optimization., • Excellent communication, documentation, and stakeholder management across corporate, properties, and construction., • Certifications (preferred): Microsoft (Entra / Intune / Azure / Power Platform), ITIL, CISSP/CCSP, Security+,, • Knowledge of and experience with Entrata and Acumatica software is highly desirable., • Familiarity with IT service management frameworks (e.g., ITIL) and the ability to adapt them to a fast-moving, entrepreneurial environment., • Incumbents must be able to physically access all exterior and interior parts of the community and amenities., • Incumbents must be able to push, pull, lift, carry, or maneuver weights of up to twenty (20) pounds independently and fifty (50) pounds with assistance., • This role primarily operates in an office environment with occasional travel to project sites or external meetings. Some exposure to outdoor elements may occur during site visits., • Primarily in an office setting with prolonged periods of sitting at a desk and working on a computer., • Incumbents must have all licenses and/or certifications as required by State and Local jurisdictions.

Job Description The company’s Simulator Solutions Architect (SSA) designs, or oversees the design of, technical solutions by prescribing COTS, AVT reused, or custom components, both hardware and software. This includes providing technical oversight, leadership and guidance to Systems Engineers, Hardware Engineers, and Software Engineers throughout the proposal, design, development, test, and support life cycle. The SSA is a one-of-a-kind position at AVT primarily responsible for developing cost effective solutions focused on reuse and COTS where possible. These solutions should be as common as possible across programs and product lines. The SSA must have a deep understanding of enterprise-level systems and architectures, technology stacks and frameworks, and industry standards and protocols. Collaboration with business stakeholders, project managers, and technical teams is required to define system requirements, constraints, goals, and solutions. Excellent communication, leadership, and problem-solving skills are essential. Must be comfortable working in a fast-paced, agile environment and be able to balance multiple priorities and deadlines while maintaining a positive team-oriented attitude. Responsibilities/Duties/Functions/Tasks • Analyzes requirements and applies standard engineering methodologies to design technical solutions by first looking for cost effective reuse, existing technologies and frameworks, then prescribing custom-developed components to develop a wholistic and supportable solution., • Produces specifications, design documents, and architecture diagrams that define a system's components, interfaces, and behaviors., • Leads technical discussions, presents proposals, and provides recommendations to senior management and other stakeholders., • Provides guidance and technical leadership to development teams during the implementation phase, ensuring adherence to architectural guidelines and best practices., • Manages and mentors junior architects and technical staff, providing guidance and support as needed., • Collaborates with cybersecurity personnel to ensure that systems and applications meet established security and compliance standards., • Reviews existing systems and applications to identify opportunities for improvement and modernization., • Researches and evaluates emerging technologies and trends to identify their potential impact on existing and future solution designs., • Provides input to the Project Manager regarding technical decisions and risks., • Works in a fast-paced development environment with the ability to handle multiple competing tasks and demands simultaneously. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for the job. Duties, responsibilities, and activities may change at any time with or without notice. Qualifications • Minimum Requirements Completion of a full course of study in an accredited college or university leading to a Bachelor’s or higher degree in engineering or a related field such as Systems Engineering, Software Engineering, or Information Technology. Substitutions: Related professional experience cannot be substituted for the educational requirements., • Experience with development and delivery of application hardware/software., • Experience with programming languages (such as C, C++, C#) and hardware/software engineering design patterns., • Experience with building to requirements and/or synthesizing requirements., • Experience with hardware/software interfaces, • Experience developing Government CDRLs related to technical solutions, • Configuration management tools experience required., • Excellent written and spoken communication skills for documentation, intra-team, and interdisciplinary communication., • Able to focus on multiple projects at once., • Organized and detail-oriented., • Ability to read, analyze, and interpret complex documentation., • Ability to analyze problems using scientific and logical thinking., • Ability to operate in a high-paced work environment. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; talk or hear. The employee must occasionally lift or move office products and supplies, up to 10 pounds. Equipment/Software/Tools Used • Computer, phone, and photocopiers, • Computer operating systems (Linux, Windows, Windows Embedded), • Software requirements gathering and modeling tools, • Microsoft Office Applications (Word, Excel, PowerPoint), • Microsoft Project, • Preferred:, • Atlassian Tool Set (Jira, Confluence, Bamboo, Bitbucket), • C, C++, C#, Java, • Must have an active Secret clearance or be eligible to obtain a Secret clearance. Founded in 1998 by an engineer, AVT Simulation is an Orlando-based, end-to-end systems integration and full-service modeling and simulation small business. Since our beginning, AVT's highly specialized staff of engineers has included some of the top leaders in the simulation industry. With an average of over 20 years of simulation experience, our dedicated staff provides specialized solutions for customers requiring on point solutions to complex problems. AVT has always been a company that strives to make a positive difference in the lives we touch. These lives include our employees and their families, our partner companies and their employees, and ultimately the warfighters receiving our products and services. Our core values are so very important to us as a company. They guide us towards success. They make us a great company to work for and a strong partner to work with. • People First, • Mission Excellence, • Do the Right Thing, • Commitment People First is our first and most important core value because we firmly believe the success of AVT is directly related to supporting our employees. We have a lot of fun (with regular employee events and engagements), while still working hard to accomplish our mission of serving our military and the warfighter. We’re looking for candidates that embody these core values, know how to have fun while working hard, and think they would thrive in an environment like ours. If you’re a self-motivated individual, then come join AVT. Come make your difference. EOE - Females/Minorities/Protected Veterans/Individuals with Disabilities/Sexual Orientation/Gender Identity Qualified individuals with a disability have the right to request a reasonable accommodation. If you are unable or limited in your ability to use or access our careers website as a result of your disability, request a reasonable accommodation by visiting and follow the instructions at the bottom. Powered by JazzHR 4vOmCyG8Ln

Job Description Optimal Solutions & Technologies (OST, Inc.) is focused on excellence. We specialize in providing Management Consulting, Information Technology, and Research Development and Engineering services. The fundamental distinction of the OST team is its business knowledge in both the public and private sectors. We serve the aerospace & transportation, association & nonprofit, defense, education, energy, financial, healthcare, and technology & telecommunications industries. OST is successful because we listen to our clients, we learn from our clients, and we know our clients. Cybersecurity / DevSecOps Engineer Journeyman Description of specific duties in a typical workday for this position: • The Cybersecurity / DevSecOps Engineer Journeyman provides cybersecurity engineering and DevSecOps support to Government programs to ensure systems are designed, developed, deployed, and sustained with security embedded throughout the system lifecycle. On a typical day, the engineer integrates cybersecurity controls, automation, and continuous monitoring into development and operational environments to support secure, resilient, and compliant systems., • Daily responsibilities include supporting the implementation of cybersecurity requirements in accordance with DoD and Federal policies; integrating security controls into CI/CD pipelines; and supporting secure software development practices. The role collaborates closely with systems engineers, developers, cloud architects, and program managers to ensure security requirements are addressed throughout system design, development, testing, deployment, and sustainment., • Additional duties include supporting Risk Management Framework (RMF) activities; developing and maintaining security automation, scripts, and tools; supporting vulnerability scanning and remediation efforts; implementing identity and access management controls; and monitoring system security posture. The Cybersecurity / DevSecOps Engineer supports the preparation and review of cybersecurity documentation, technical artifacts, and compliance evidence and assists with security testing, validation, and accreditation activities. The role provides technical recommendations to improve system security, automation, and operational efficiency and supports continuous improvement of secure development and operations practices. Requirements (Years of experience, Education, Certifications): • Minimum of 3 years of experience supporting cybersecurity engineering, DevSecOps, or secure system development within a DoD, Federal, or enterprise environment, • Bachelor’s degree in Cybersecurity, Computer Science, Information Technology, Engineering, or a related technical discipline, • Demonstrated experience with:, • Secure software development and DevSecOps practices, • CI/CD pipelines and automation tools, • Risk Management Framework (RMF) or similar cybersecurity compliance frameworks, • Vulnerability scanning and remediation, • Security monitoring and incident response support, • Cross-functional collaboration across development, operations, and security teams, • Active Secret security clearance (required) Nice to Have (skills that are not required, but nice to have): • Experience supporting enterprise transformation, cloud-based systems, or digital modernization programs, • Familiarity with:, • DevSecOps tools and platforms such as GitLab, Jenkins, GitHub, and Kubernetes, • Cloud security architectures, • NIST SP 800-series publications and RMF tools, • Industry certifications such as:, • Security+, CISSP, CISM, or similar credentials, • Cloud security or DevSecOps certifications This is a full-time position paying a base salary, full benefits, and has possible bonus potential based on merit and performance. To be considered for this position, please apply online with a resume. OST is an equal opportunity employer. Applicants are considered for positions without regard to race, religion, gender, native origin, age, disability, or any other category protected by applicable federal, state, or local laws.

Job DescriptionJob Title: Electrical Engineer Location: Orlando FL Payrate: 37$/hr Duration: 12 Months Job Description: Position Description Working knowledge of all, but not limited to, the following: • OUC Construction Standards Manuals (Overhead and Underground);, • OUC Electric Service and Digital Meter Installation Manual;, • NEC/NESC books;, • OUC Engineering Manual;, • Letter of Responsibility – unique specification package provided to customers;, • Permits by local governing agencies;, • Process to obtain a meter installation;, • Construction crew scheduling;, • Civil, AutoCAD, and technical drawings;, • Riser diagrams;, • GIS maps;, • Invoices;, • Estimate reports;, • Equipment (i.e., iPhone, measuring wheel, company radio, hammer, wood stakes, spray paint);, • Software applications (i.e., PSERM, CC&B, AutoCAD, ePets, Arc-Reader, ARM360);, • Related industry, organizational, and departmental policies, practices, and procedures; legal guidelines, ordinances, and laws., • Able to calculate amperage on both sides of the meter for wiring/transformer sizing, voltage drop, and fault current;, • Understand and apply governmental accounting practices in maintenance of financial records;, • Ability to make arithmetic computations using whole numbers, fractions, and decimals, and compute rates, ratios, and percentages; Physical Requirements This job requires standing, walking, sitting, bending/stooping, repetitive motions, reaching overhead, climbing (i.e., stairs, hills, ladders, etc.), and may lift up to twenty (20) pounds. This job requires speaking and hearing, typing, writing, detailed inspection, and may drive a company vehicle. Skills Required Analyze future projects from a distribution electrical engineering perspective by preparing designs, plans, specifications, cost estimates for construction work, and documents. Oversee projects and manage capital projects from start to finish, providing electric service to new and existing customers. Primary Functions • Prepare designs, plans/specifications, and documents for Electric Distribution Projects;, • Complete cost estimates for Electric Distribution Projects;, • Manage Electrical Distribution projects from development stage through completion;, • Analyze Electrical Plans for new project developments (i.e., Commercial/Residential);, • Review completed projects by comparing actual costs with the estimated costs and verify the accuracy of new infrastructure placed within the OUC Geographic Information Systems (GIS) mapping system;, • Resolve conflicts with multiple parties, including OUC customers, contractors, governmental agencies, and internal employees;, • Inspect Distribution Infrastructure installed by private contractors and OUC contractors; Education Required Education/Certification/Years of Experience Requirements: Bachelor's degree in Electrical Engineering from an accredited college or university. Additional Information This role will help supplement the workload as we incorporate Grid Hardening projects this fiscal year. OUC Distribution Electric customers are growing exponentially, especially in the STC area. #TB_EN #ZR Company DescriptionFounded in 2002 by three former Monster.com executives; TalentBurst is an award-winning full-service Staffing Firm working directly with Fortune 500 companies in the US and Canada. We specialize in Contract and Contract to Permanent roles across many industries and have direct/contractual relationships with all our clients. Please visit our website or come meet us at our offices in Natick, MA, Miami, FL, Christiansburg, VA, Vineland, NJ, Houston, TX & downtown San Francisco, CAFounded in 2002 by three former Monster.com executives; TalentBurst is an award-winning full-service Staffing Firm working directly with Fortune 500 companies in the US and Canada. We specialize in Contract and Contract to Permanent roles across many industries and have direct/contractual relationships with all our clients. Please visit our website or come meet us at our offices in Natick, MA, Miami, FL, Christiansburg, VA, Vineland, NJ, Houston, TX & downtown San Francisco, CA

Job Description Ardurra has an excellent opportunity for a full-time professional engineer to join our Traffic & Safety Team at our Orlando, Florida office! Ardurra is a multidisciplinary civil engineering services firm which provides broad-based solutions tailored to the specific needs of the public and private sector. We leverage the depth of our professional and technical expertise, as well as our integrated structure, to deliver practical, innovative solutions for our clients. We have been creating opportunities for our employees to develop both personally and professionally. As a result, our team has contributed to some of the nation’s most important infrastructure projects. These are projects that can positively impact people’s lives. Primary Function: The Traffic & Safety Engineer performs various tasks related to traffic studies, including preparing studies to identify engineering solutions to traffic operational and safety issues. The candidate should have knowledge of traffic analysis, transportation design concepts, principles, and theories, and a genuine desire to improve safety and mobility on our transportation system. The ideal candidate is also comfortable supporting or leading traffic operations design for one or more components, such as signalization, highway lighting, or signs and pavement markings. However, candidates without design experience are still encouraged to apply. Depending on level of experience, this position could be a Project Engineer, Project Manager, or Senior Project Manager. Work tasks will be performed with considerable independence. Our office follows a hybrid work structure where employees can work remotely some days as approved by the supervisor. Primary Duties: • Perform field reviews, conduct research, and collect and analyze traffic data for transportation projects., • Analyze crash data and identify appropriate countermeasures to improve safety and mobility for all road users, • Analyze and interpret data from traffic modeling software, GIS, or associated databases, • Use specialized traffic engineering computer software to conduct traffic operations and capacity analysis, such as HCS, Synchro, Sidra, and Corsim., • Prepare signal warrant studies, intersection analysis, corridor studies, traffic impact studies, and support PD&E studies, • Attend public meetings and community workshops, • Prepare cost estimates and financial justification for projects through benefit/cost and NPV analysis, • Prepare detailed reports and documentation of the study methodology or design approach, • Bachelor’s degree in Civil Engineering from an ABET accredited program, • Licensure as a Professional Engineer in the state of Florida or ability to obtain within 6 months., • 6+ years of experience in transportation engineering, • Proficiency with Microsoft Office and experience with MicroStation, • Understanding of Highway Capacity and Highway Safety concepts, • Ability to effectively communicate technical information both verbally and in writing, • Demonstrate flexibility and teamwork, • Produce design plans, such as signing and pavement marking, signalization, lighting, and ITS plans, • PTOE or RSP Certification is a plus!, • Experience working with the Central Florida Regional Planning Model (CFRPM) is a plus! Why Ardurra? While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-KB1

Job Description Company Overview Smart City Telecom is a full-service telecommunications company that has been serving the residents and businesses of Celebration, Lake Buena Vista, and Bay Lake, Florida since 1969 and we're now expanding our service to the greater Central Florida market. With a deep heritage in delivering solutions, with a top-down commitment to customer satisfaction, Smart City Telecom provides cutting-edge Internet and voice services that are unrivaled in the industry. While Smart City Telecom is continuously updating our products and services to make sure that we deliver the highest quality, we continue to live by the core values upon which we were founded. Above all else, we operate with integrity without compromise – we deliver what we say we will deliver, and we do right by all our customers, business partners, and vendors. We are committed to recruiting, developing, rewarding, and retaining the best possible candidates in the workforce. We strive to assist our team members in accomplishing both individual and overall organizational goals. We provide a work environment where people can drive results, develop, and grow their careers. We recognize the individuality of each of us and we are on a mission to create a workplace where you can grow and succeed. At Smart City Telecom, we stand for integrity, efficiency, problem solving, equity, and character in all our relationships and interactions. Our focus is on promoting growth, accountability, and empowerment in the company. Job Summary The OSP Engineer is responsible for designing and developing Outside Plant (OSP) fiber networks, including GPON systems. This role involves creating construction drawings, preparing permit documentation, and managing projects through to completion. Responsibilities Responsibilities and essential job functions include but are not limited to the following: * Develop Red, Green, and Brown drawings for DOT and County Road Projects. * Respond within 48 hours to all facility requests pertaining to relocation projects. * Design and develop OSP construction drawings and permit documentation. * Manage projects from initiation through completion, including scheduling and budgeting. * Apply company standards and policies for aerial, buried, and underground designs. * Maintain and update OSP record systems (SpatialNet and Offline) to ensure accurate as-built documentation. * Oversee project plans, approve designs, specifications, and manage schedule changes. * Conduct field site visits and meetings with contractors, customers, and local agencies. * Implement procedures and systems to coordinate financial and budget activities for operational efficiency. * Support cross-functional projects and assist other departments and team members as directed. Qualifications – The ideal candidate will demonstrate: • Proficiency in Microsoft Office (Outlook, Word, Excel)., • Ability to quickly learn proprietary and cloud-based software., • Willingness to adapt existing processes to new systems., • Strong organizational skills, attention to detail, and ability to follow through., • Effective time management and problem-solving abilities., • Strategic planning and analytical thinking skills., • Excellent verbal and written communication skills, with the ability to explain complex concepts clearly., • Ability to manage multiple projects in a fast-paced environment with minimal supervision., • Professional demeanor and ability to represent the company positively., • Collaborative mindset with a proactive approach to mentoring and knowledge sharing., • Ability to read and interpret maps, conduit records, and layout drawings., • Ability to read and understand road project designs., • Proficiency in Google Earth and AutoCAD; familiarity with SpatialNet preferred., • Solid understanding of OSP construction techniques., • Expertise in aerial and underground plant design., • Advanced knowledge of copper, fiber, and substructure design., • Combination of office and field work; schedule may vary based on business needs., • Indoor office environment with prolonged sitting., • Outdoor work in varying weather conditions (heat, cold, inclement weather)., • Safe operation of company vehicles in diverse traffic and weather conditions, including nighttime driving., • Extensive walking on various terrains and working around construction equipment., • Minimum 5 years of experience in OSP engineering or construction., • Minimum 3 years of experience with a telecommunications company., • Proficiency in AutoCAD; SpatialNet experience preferred., • Ability to pass a criminal background check and drug screening., • Competitive Salary Commensurate with Experience, • Medical, Dental, and Vision, • Supplemental Benefits - Accident, Critical Illness, Hospital Care, • Life and Disability, • Flexible Spending Accounts, • 401K with Match, • Life Assistance Plan, • Wellness Plan, • Vacation, Personal, Sick, and Holiday Pay, • Ongoing Professional Training & Educational Reimbursement Program Equal Employment Opportunities: Smart City is committed to providing equal employment opportunities to all persons regardless of race, color, ancestry, citizenship, national origin, religion, veteran status, disability, genetic characteristic or information, age, gender, sexual orientation, gender identity, gender expression, marital status, family status, pregnancy, or other legally protected status (collectively, “protected statuses”). We do not tolerate unlawful discrimination in any employment decisions, including recruiting, hiring, compensation, promotion, benefits, discipline, termination, job assignments, or training. Disclaimers: The job responsibilities described above indicate the general nature and level of work performed by employees within this classification. It is not intended to include a comprehensive inventory of all duties and responsibilities for this job. Job duties and responsibilities are subject to change based on evolving business needs and conditions. In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information. Please be advised that Smart City does not require any form of payment from job applicants during the recruitment process. All legitimate job openings will be posted on our official website or communicated through official company email addresses. If you encounter any job offers that request payment in exchange for employment at Smart City, they are not for employment with us but may relate to another company with a similar name. NO OUTSIDE AGENCIES Smart City is not accepting unsolicited assistance from search firms for this employment opportunity. All resumes submitted by search firms to any employee at Smart City via-email, the Internet or in any form and/or method without a valid written Statement of Work in place for this position from Smart City HR/Recruitment will be deemed the sole property of Smart City. No fee will be paid in the event the candidate is hired by Smart City as a result of the referral or through other means.

Job DescriptionJob Summary AVT Simulation, a leading government contracting company in the field of simulation and training solutions, is currently seeking a skilled and detail-oriented Financial Analyst professional to join our team in Orlando. As a Financial Analyst, you will play a crucial role in supporting the financial management of our programs and contracts as well as providing financial insights, analysis, and support to optimize AVT Simulation’s financial performance and decision-making processes. You will be responsible for monitoring project costs, preparing financial reports, analyzing financial data, and providing recommendations to enhance program profitability. This role requires strong analytical skills, exceptional attention to detail, and the ability to work collaboratively with cross-functional teams. Responsibilities • Collaborate with program managers and cross-functional teams to develop program budgets, forecasts, and financial plans., • Analyze financial data and performance metrics to identify trends, risks, and opportunities for cost optimization and revenue growth., • Monitor and track project costs, ensuring adherence to budgets and identifying any variances., • Prepare and analyze financial reports, including revenue forecasts, cost analysis, and profitability assessments., • Assist in the development and maintenance of annual budgets and long-term financial plans. Collaborate with relevant stakeholders to ensure budgetary goals align with business objectives., • Brief the findings of the analysis to leadership monthly., • Establish and maintain a relationship with our customers., • Develop cash flow projections based on historical data, market trends, or other data sources., • Collaborate with accounting teams to ensure accurate and timely invoicing., • Assist in the development and implementation of financial policies, procedures, and controls., • Stay updated on industry best practices, regulations, and compliance requirements related to program finance., • Provide financial guidance and support to program managers and stakeholders., • Bachelor’s degree in Finance, Accounting, or a related field., • Proficient in financial modeling and data analysis using tools such as Microsoft Excel., • Understanding of financial principles, budgeting, and cost control., • Proven experience in program finance, financial analysis, or a similar role., • Exceptional attention to detail and accuracy., • Strong verbal and written communication skills., • Knowledge of government contracting, and defense industry regulations is highly desirable., • Ability to work independently, prioritize tasks, and meet deadlines in a fast-paced and dynamic environment., • Excellent analytical and problem-solving skills with the ability to interpret complex financial data., • Ability to work collaboratively in a fast-paced, cross-functional team environment., • Costpoint experience is a plus., • Prior experience in simulation, training, or aerospace industries is a plusEssential Mental Requirements, • Excellent verbal and written communication skills for documentation and intra- team/interdisciplinary communication., • Ability to read, analyze, and interpret complex documentation., • Ability to analyze problems using scientific and logical thinking.Essential Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; talk or hear. The employee must occasionally lift or move office products and supplies, up to 10 pounds. Equipment/Software/Tools Used * • Computer, phone, printer/scanner, • Microsoft Office Application (Excel, Project, Word, PowerPoint, Teams,), • PDF editor (Adobe, PDF Sam) Founded in 1998 by an engineer, AVT Simulation is an Orlando-based, end-to-end systems integration and full-service modeling and simulation small business. Since our beginning, AVT's highly specialized staff of engineers has included some of the top leaders in the simulation industry. With an average of over 20 years of simulation experience, our dedicated staff provides specialized solutions for customers requiring on point solutions to complex problems. AVT has always been a company that strives to make a positive difference in the lives we touch. These lives include our employees and their families, our partner companies and their employees, and ultimately the warfighters receiving our products and services. Our core values are so very important to us as a company. They guide us towards success. They make us a great company to work for and a strong partner to work with. • People First, • Mission Excellence, • Do the Right Thing, • Commitment People First is our first and most important core value because we firmly believe the success of AVT is directly related to supporting our employees. We have a lot of fun (with regular employee events and engagements), while still working hard to accomplish our mission of serving our military and the warfighter. We’re looking for candidates that embody these core values, know how to have fun while working hard, and think they would thrive in an environment like ours. If you’re a self-motivated individual, then come join AVT. Come make your difference. EOE - Females/Minorities/Protected Veterans/Individuals with Disabilities/Sexual Orientation/Gender Identity Qualified individuals with a disability have the right to request a reasonable accommodation. If you are unable or limited in your ability to use or access our careers website as a result of your disability, request a reasonable accommodation by visiting and follow the instructions at the bottom. Powered by JazzHR wivmDkHkOl

Job Description Experience level: Mid-senior Experience required: 10 Years Education level: Bachelors degree Job function: Engineering Industry: Industrial Automation Total position: 1 Relocation assistance: Limited assistance Visa sponsorship eligibility: No JOB DESCRIPTION: • We have a Controls Engineer position open in Orlando, FL., • This position is responsible for electrical/controls engineering on large scale projects., • Project requirements involve control system design from scratch (hardware/software/network), electrical panel design and power calculations, risk assessment, component selection and configuration, control system programming, and control system installation/commissioning. RESPONSIBILITIES: • Must be organized, technically competent, have effective oral and written communications, experienced in working in a multi-disciplined environment and interfacing with engineers, designers, and drafters, • Responsible for system design from blank sheet of paper to create concept of electrical/control/system components based on project requirements, • Experience doing design via drafting software (AutoCAD preferred), • Provide input, and system modification as needed, for system integration with other project disciplines, • Able to interface with facility design to optimize panel location minimizing voltage drop and designing a more efficient system hardware layout, • Manage vendor scope to verify safety, functionality, and all contract requirements are satisfied, • Ensures design complies with any local or government agency design/implementation codes in addition to client codes/standards, • Knowledge of analyzing system design for Hazard analysis development and mitigation, • Design and analysis for safety critical parts within a control system, • Designing redundant mitigations in system to increase safety and reliability, • Designing systems with complex motion and integration from automated systems, • Develops documents of system configuration and design. Documents include Description of operation, Detailed control system design description, panel assembly drawings and schematics, termination drawings, network layout, system implementation/acceptance test plans, system routine maintenance/job plans, • Able to perform the following system design calculations/analysis: Short circuit protection, harmonics, noise reduction / cancellation, power consumption, load flow, short circuit protection, protective relay / circuit design, ground fault monitoring, safety system implementation (SIL/PL rating knowledge is preferred), • Designs, develops, and implements DCS/PLC control system (logic software) to meet process requirements. As well as the ability to understand and implement client design standards for software system, • Understanding of control system components and instrumentation to properly design software interface/control to achieve system functionality, • Develops documents detailing control/software configuration and design. Documents include: Theory/Description of operation, Detailed control system design description, Software design plan, Detailed software implementation/description, system implementation/acceptance test plans, • Knowledge of design, troubleshooting, and code implementation for the following programming languages: Ladder logic (required), C++ (preferred), visual basic (preferred), and structured text (required), • Ability to perform processor loading calculations, scan time analysis, input/output response timing analysis, control system network delays analysis, and program task/code block priorities/timing management/interface, • Can design code that is efficient (not processor resource heavy) while maintaining a minimalist implementation to help facility future modifications and understanding by client post turnover. This includes providing any documentation and/or tools that will assist with program understanding and troubleshooting, • Ability to diagnose control system issues during troubleshooting to assist in determining root cause (trending, system analysis, test logic, etc.), • Ability to minimize secondary faults from occurring within logic by programming smart diagnostics that can determine root cause and minimize further effects caused by initial fault, • Will assist with initial start-up and debug integrated systems and the development of system documentation, • Individual will be working on automation and control system integration projects for clients in industries such as entertainment and manufacturing, • Will act as technical lead on projects and may guide lower level engineers, technicians, and contractors, • Knowledge of ride system design for attractions involving guests is preferred, • Capable of working off shifts as needed during installation/commissioning to support project QUALIFICATIONS: • Must be organized, technically competent, have effective oral and written communications, experienced in working in a multi-disciplined environment and interfacing with engineers, designers, and drafters, • Education – bachelors degree in electrical engineering. (Bachelors degrees in other disciplines may be acceptable if work experience is directly related to electrical engineering. Disciplines outside of the electrical/controls area will not be considered), • Experience – 5+ years of experience covering most responsibilities listed above. Preferred experience in ASTM standards, attractions industry, safety engineering, instrumentation, components, and logic programming. Experience with AutoCAD is also desired, • Key Competencies – Knowledge of contract documents and specifications. Ability to collect field data and accurately record findings. Ability to perform system design functions. Planning, Customer Focused, Timely Decision Making, Informing, Organizing, Priority Setting, Problem Solving. Experience working with hardware/software from one of the major industrial manufacturers (i.e. Allen-Bradly, Siemens, etc.). Experience with ethernet based distributed remote I/O systems, • Skills – All employees are required to be proficient in the use of Microsoft Windows and Office environments, • Travel – Ability to travel up to 30% worst case (10% is typical with last couple years depending on project)

Job Description Are we the road to your future? We are currently searching for a talented Senior Structural (Bridge) Engineer to support our Southeast Region located in Maitland, FL. The ideal candidate will lead the engineering team’s development of construction bid documents, design and assist with business development activities. To be considered for this position, applicants must have, at minimum, a Bachelor’s Degree in Civil or Structural Engineering. What you’ll be doing: • Perform/supervise calculations and analysis for designing bridge and transportation structures using various bridge design software programs, • Perform/supervise load ratings on bridges of various type size and complexity, • Review calculations and design details developed by others, • Attend meeting with clients and other professionals and organizations, • Develop solutions to challenges presented by the client within budget, schedule and project constraints, • Review shop drawings and other construction related submittals, • Organize and maintain project files, • Quantity take-off for bridge project engineer’s estimate, • Provide oversight and direction to junior engineering staff What you need to have: • Bachelor’s Degree in Civil or Structural Engineering, Master of Engineering preferred, but not required, • Valid Professional Engineering Licensure (P.E.) in Florida, • 10 - 15 years of engineering experience in bridge design, • Extensive experience utilizing FDOT specific processes, manuals, or guidance on bridge projects is required, 10 years minimum, • Skilled in the use of MicroStation and AutoCAD, experience with OpenBridge Designer a plus, • Technical expertise for the layout & design of bridges and related highway structures, • Familiarity with rehabilitation of existing bridges and highway structures, • Knowledge of AASHTO and other pertinent bridge design specifications, • Post-tensioned concrete design experience a plus, • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines., • If applicable to the position, a post offer fit for duty evaluation to ensure the individual can safely perform the essential functions of the role., • Valid driver’s license., • A satisfactory motor vehicle report (MVR). Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match, • Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. #LI-HF1 Florida

Job Description Optimal Solutions & Technologies (OST, Inc.) is focused on excellence. We specialize in providing Management Consulting, Information Technology, and Research Development and Engineering services. The fundamental distinction of the OST team is its business knowledge in both the public and private sectors. We serve the aerospace & transportation, association & nonprofit, defense, education, energy, financial, healthcare, and technology & telecommunications industries. OST is successful because we listen to our clients, we learn from our clients, and we know our clients. Sr. Aerospace Engineer Description of specific duties in a typical workday for this position: • The Aerospace Engineer provides engineering support for aerospace systems and subsystems in support of DoD aviation and training programs. The engineer supports the analysis, design, integration, testing, validation, airworthiness, and sustainment of aircraft, aviation subsystems, and associated Training Aids, Devices, Simulators, and Simulations (TADSS)., • Responsibilities include supporting development and review of aerospace system requirements, specifications, and technical architectures; conducting performance, safety, and airworthiness analyses; supporting test planning, execution, and evaluation activities; and assisting with Government Acceptance Testing (GAT) and On-Site Acceptance Testing (OSAT). The Aerospace Engineer participates in reviews of design baselines, drawings, and technical data packages and supports configuration management and change control activities., • The role supports analysis of flight performance, aerodynamics, structures, propulsion, avionics integration, and environmental factors as applicable. The Aerospace Engineer assists in development and review of technical documentation, engineering assessments, and reports; supports preparation and evaluation of Engineering Change Proposals (ECPs) and Value Engineering Proposals (VEPs); and participates in hardware and software quality assurance activities to ensure compliance with DoD, Army, and airworthiness requirements. Requirements (Years of experience, Education, Certifications): • Bachelor’s degree in Aerospace Engineering or a closely related engineering discipline (Mechanical, Aeronautical, Systems Engineering), • 10 years of experience performing aerospace or aviation engineering in support of military, DoD, or aviation programs, • Demonstrated experience in one or more of the following areas:, • Aircraft systems engineering and integration, • Aerodynamics, flight performance, or propulsion analysis, • Airworthiness and safety assessments, • Aerospace testing, validation, and acceptance support, • Review of technical drawings, specifications, and data packages, • Configuration management and engineering change support, • Active Secret security clearance is required Nice to Have (skills that are not required, but nice to have): • Master’s degree in aerospace engineering or a related discipline, • Experience supporting Army aviation platforms (e.g., UH-60, AH-64, CH-47, Huey II), • Familiarity with:, • DoD 5000 series and Defense Acquisition Guidebook, • Airworthiness release processes, • Aviation standards and military specifications, • Certifications or training in:, • Systems Engineering (INCOSE), • Six Sigma / Lean OST is an equal opportunity employer. Applicants are considered for positions without regard to race, religion, gender, native origin, age, disability, or any other category protected by applicable federal, state, or local laws.

Job DescriptionOur client is currently seeking a Stormwater Engineer with experience to join their team to assist with our continued project workload. This role provides an opportunity to work in a small office with ties to the resources and projects, as well as the benefits of a much larger firm. The team has the opportunity to work on unique projects with a local focus to make a difference, while performing site development engineering and project management tasks for residential and commercial projects. Candidates should have experience with site civil design, stormwater design and permitting, and applicable software applications including hydrology modeling program, storm drainage programs, pond recovery programs, AutoCAD, and Civil 3D. Qualifications: • BS degree in Civil Engineering (preferred), • Professional Engineer (P.E.) designation (preferred), • Proven ability to effectively and respectfully communicate, both oral and written skills, • Proven ability to develop and maintain professional relationships with clients, public agency officials, specifically WMD staff, • Outstanding organizational skills, • Proven ability to work both independently and as part of a team, • Experience with detail site layout and grading; drainage and stormwater management design; utility design; and erosion and sediment control design, • Experience with industry software (StormCAD, Hydroflow, ICPR, PONDS, etc) and development of hydrology studies, • Experience with City, County and State WMD codes and regulations regarding stormwater designProven ability and experience in interpreting plans, designing stormwater facilities, site grading and permitting.If you meet these qualifications, please apply now.

Job Description JOB DESCRIPTION: • We have a Mechanical Engineer position open in Orlando, FL., • This position is responsible for mechanical engineering on large-scale projects., • Must be organized, technically competent, have effective oral and written communications, experienced in working in a multi-disciplined environment and interfacing with engineers, designers, and drafters, • Designs, develops, and implements fully integrated mechanical assembly systems to meet process requirements. As well as complying with any local or government agency design/implementation codes, • Knowledge of analyzing system design for Hazard analysis development and mitigation, • Understanding of Class 1 parts in order to minimize their need and optimize redundancy minimizing single points of failure, • Develops documents of system configuration and design. Documents include: Theory/Description of operation, Detailed mechanical system design description, system implementation/acceptance test plans, system routine maintenance/job plans, • Develops drawings of mechanical design, assemblies, and installation procedures on AutoCAD and/or SolidWorks software, • Ability to design and troubleshoot pneumatic and hydraulic control systems, • Ability to perform system analysis/calculations including: Stress, fatigue, reliability, life expectancy, tolerance studies, • Knowledge of ride system design requirements for attractions involving guest accelerations, reach envelope, ingress/egress, weight, and emergency evacuation analysis and implementation upon control system failure in worst-case scenarios, • Will assist with the initial start-up and debugging of integrated systems and the development of system documentation, • Individual will be working on system integration projects for clients in industries such as entertainment and manufacturing, • Will act as technical lead on projects and guide lower-level engineers, technicians, and contractors, • Will act as Project Manager on smaller projects ranging from $50k to $250k. This includes but is not limited to:, • Develops and executes implementation plans for the project, • Assigns work to meet overall project deadlines, • Ensures that all project team members clearly understand the scope of W-M responsibilities, • Develops schedules for W-M and customer requirements, • Evaluates progress on project(s) and details changes, • Responsible for all purchasing and subcontractor requirements, • Education – Bachelors Degree in Mechanical Engineering., • Experience –10+ years in the below areas is preferred: An in-depth understanding of mechanical systems, components, stress analysis, acceleration forces, and knowledge of amusement ride safety standards (ASTM Standards). Experience with AutoCAD and SolidWorks is also desired, • Key Competencies – Knowledge of contract documents and specifications. Ability to collect field data and accurately record findings. Ability to perform system design functions. Planning, Customer Focused, Timely Decision Making, Informing, Organizing, Priority Setting, Problem Solving, • Skills – All employees are required to be proficient in the use of Microsoft Windows and Office environments, • Standard office environment, On-site office environment, and diverse industrial/construction environments. Frequent PC usage, fax machines, copy machines, and phones.

Job Description About Us: Pickett, an ESP Associates company, is a highly innovative surveying and engineering company with over 60 years of industry experience serving clients throughout the US and Caribbean. At Pickett, we use the acronym S.O.L.V.E. to define our core values that include: Safety first, Outstanding service, Lasting relationships, Valued teamwork and Engaged culture. “We solve the problems that matter” and we are always looking to add passionate, motivated, and qualified individuals to our rapidly expanding team. About The Role: As the Manager of Engineering, you are responsible for the oversight and development of the transmission line engineering teams in your region, ensuring your team delivers high quality and cost competitive transmission line engineering services. You will also be involved in business development and company initiatives, which may include establishing business strategies and objectives. What You Will Be Doing: • Manage and develop engineering teams, • Support business development activities and specifically grow the business in your region, • Ensure that your teams uphold Pickett’s values, brand promises, and code of conduct, • Provide a work environment conducive to team members growth and development, • Provide project oversight, including managing engineering scope according to technical standards, developing change orders, and maintaining project schedules and budgets, • Maintain a high level of quality and responsiveness to client requirements in alignment with Pickett’s standards, • Oversee transmission line design activities and quality assurance and control, • Interact regularly with clients, which includes maintaining current relationships and developing new relationshipsWhat You Bring:, • Bachelor’s in Engineering (required), • Professional Engineer (PE) certification (required), • 15+ years of related engineering experience, whether through consulting or working for an electric utility (required), • Project management experience (preferred), • Knowledge of the fundamentals of managing project scope, schedule, and budget, • Understanding of basic practices for evaluating engineering and design issues, • Mindset for developing better alternatives and recommendations related to the transmission line group (i.e.: structure, processes, software, etc.) with the ability to communicate and apply them accordingly, • Ability to work in a safe manner and always obey safety regulations, • Effective communication skills (verbal, written and presentation), • Ability to use a collaborative approach when working with peers or clients, • Demonstrate a high level of comfort with sharing knowledge freely, • Ability to identify relevant metrics and ability to apply them to the business, our clients, and projects, • Strong attention to detail and ability to work in a team environment and/or independently, • Ability to think creatively as it relates to engineering innovation and solutions, • Capacity to thrive in a fast-paced, entrepreneurial, and highly agile environment You will have the opportunity to learn, grow and directly contribute to our business. You will also have a very visible and tangible impact by solving real world problems. You will contribute significantly to the growth and development of our company while also continuing to be challenged and inspired along the way! Pickett offers an excellent employee benefits package including: • Competitive compensation with yearly performance reviews and discretionary annual bonuses, • 401(k) (Traditional & Roth plans) with a guaranteed employer match of 100% up to the first 3% and 50% on the next 2% (eligibility after 60 days), • PTO (Paid Time Off) & 10 Paid Holidays, • Tiered Health, Vision & Dental Insurance Options (eligibility after 30 days), • Behavioral Medicine through Teladoc, • Short-Term Disability Insurance (Employer Paid), • Long-Term Disability Insurance, • Life Insurance, • Pet Insurance, • Education Reimbursement Opportunities, • Flexible and Dependent Benefits Plan, • Referral Bonuses

Job DescriptionJob SummaryAVT is a close family of highly specialized engineers and simulation industry leaders based in Orlando, Florida. Our dedicated team provides specialized solutions for our diverse portfolio of clients and partners. With over 25 years of simulation experience, we specialize in creating advanced ground and flight simulators for Department of Defense customers. The successful Senior Director of Marketing candidate will play a pivotal role in shaping the marketing strategies and initiatives of our organization and will work with Business Development, Sales, Proposals, Training Center, Manufacturing, Finance, and other departments to achieve the marketing goals. The salary for this position falls within the range of $90,000 to $120,000 annual salary, depending on degree(s), years of experience, and other qualifications. Responsibilities/Duties/Functions/Tasks • Develop and execute comprehensive marketing strategies to promote AVT Simulation's products and services in the modeling and simulation market., • Lead a small marketing team and collaborate with cross-functional teams to ensure cohesive messaging and branding across all channels., • Plan and oversee the creation of marketing materials, including presentations, brochures, website content, and other promotional materials., • Identify and capitalize on market trends and opportunities to drive business growth and enhance AVT Simulation's market presence., • Manage digital marketing efforts, including social media, email campaigns, and online advertising, to effectively reach target audiences., • Establish and maintain strong relationships with Department of Defense customers and industry partners., • Monitor and analyze marketing performance metrics to optimize campaigns and measure the effectiveness of marketing initiatives., • Stay informed about the competitive landscape and adjust strategies as needed to maintain a competitive edge., • Plan, organize and execute large and small trade show booths, tables, and meeting rooms., • Oversee Distinguished Visitor walk-throughs, briefings in AVT spaces, and customer on-site and off-site visits., • Provide marketing services to AVT Corporate offices, two Profit & Loss (P&L) centers, AVT’s Light Manufacturing Facility, and AVT’s Training Center., • Develop a marketing plan(s) supporting AVT’s products and services., • Develop Marketing’s Annual Operating Plan (AOP) and gain senior leadership approval of this plan. Other DutiesPlease note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for the job. Duties, responsibilities, and activities may change at any time with or without notice.QualificationsMinimum Requirements, • Bachelor’s degree in Marketing, Business Administration, Digital Media, or a related field from an accredited university., • Minimum of 7 years of progressive experience in marketing, with a proven track record of successfully executing marketing strategies and campaigns., • Prior experience in the defense or aerospace industry is a strong plus., • Strong leadership skills with the ability to mentor and manage a team effectively., • Exceptional written and verbal communication skills., • Creative thinking and problem-solving abilities to develop innovative marketing solutions., • Supervisory experience for small to medium sized teams., • Ability to obtain and maintain necessary security clearances as required for defense-related projects., • Have an understand of how the DoD customers are reached and how Federal Acquisition Regulation (FAR) based rules apply to marketing efforts.Essential Mental Requirements, • Must possess a great attitude and be generally positive., • Excellent written and spoken communication skills for documentation, intra-team, and interdisciplinary communication., • Ability to multitask effectively., • Demonstrates a high level of professionalism., • Ability to work independently with minimal supervision., • Ability to make sound decisions and execute., • Must possess effective organizational skills., • Intimate understanding of traditional and emerging marketing channels.Essential Physical RequirementsWhile performing the duties of this job, the employee is regularly required to talk or listen. The employee frequently is required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. Must be able to lift up to 40 lbs of marketing materials for transport. The employee is occasionally required to assist with the transport and assembly of a tradeshow booth and items.Equipment/Software/Tools Used, • Basic computer operating system (Linux, Windows), • Microsoft Office Application (Word, Excel, PowerPoint), • Photoshop, • Adobe Creative Cloud If you are a results-driven marketing professional with a passion for innovation and a desire to contribute to a company that has a strong legacy in the modeling and simulation industry, we invite you to submit your resume at . We appreciate your interest in joining AVT Simulation and look forward to reviewing your application. Our Heritage: Founded in 1998 by an engineer, AVT Simulation is an Orlando-based, end-to-end systems integration and full-service modeling and simulation small business. Since our beginning, AVT's highly specialized staff of engineers has included some of the top leaders in the simulation industry. With an average of over 20 years of simulation experience, our dedicated staff provides specialized solutions for customers requiring on point solutions to complex problems. AVT has always been a company that strives to make a positive difference in the lives we touch. These lives include our employees and their families, our partner companies and their employees, and ultimately the warfighters receiving our products and services. Our core values are so very important to us as a company. They guide us towards success. They make us a great company to work for and a strong partner to work with. • People First, • Mission Excellence, • Do the Right Thing, • Commitment People First is our first and most important core value because we firmly believe the success of AVT is directly related to supporting our employees. We have a lot of fun (with regular employee events and engagements), while still working hard to accomplish our mission of serving our military and the warfighter. We’re looking for candidates that embody these core values, know how to have fun while working hard, and think they would thrive in an environment like ours. If you’re a self-motivated individual, then come join AVT. Come make your difference. EOE - Females/Minorities/Protected Veterans/Individuals with Disabilities/Sexual Orientation/Gender Identity Qualified individuals with a disability have the right to request a reasonable accommodation. If you are unable or limited in your ability to use or access our careers website as a result of your disability, request a reasonable accommodation by visiting and follow the instructions at the bottom. Powered by JazzHR MXEApM2Iif

Job Description As part of a design team, the primary responsibilities of the Engineer, Land Development are small and large infrastructure planning and design, assisting with Site Development Planning and conceptual sketches, stormwater design and permitting, pavement evaluations and designs, site and facilities design, commercial site development layouts, utility system design, and related services. Duties also include generating engineering reports, preparation of project specifications, assistance and guidance of entitlement process for zoning and future land use changes, and monitoring the entitlement process as well as permit applications (City, County, and State), and providing engineering oversight during construction. This position is based in AVCON's Orlando, Florida office. ESSENTIAL FUNCTIONS (may include but are not limited to): • Assists in the various design elements to complete a project, component, or system with other team members with clear and specific objectives involving conventional types of plans, surveys, investigations, structures, and/or equipment., • Assists in the preparation of complete project documentation to include plans, specifications, and engineer estimates including the collection, assembling, and organizing of project data., • Evaluates, selects, and adapts standard techniques, procedures, and criteria to project assignments; formulates and solves problems with guidance and direction., • Plans and coordinates detailed aspects of engineering work; works on multiple projects of moderate size or portions of major projects using time efficiently to stay within budget and deliver on time., • Assists in the preparation of project scopes, tasks, budgets, and schedules., • Assists with proposals including bid documents, project reports, studies, and other documentation., • Receives general direction on key objectives; receives guidance when necessary on unconventional or complex programs, direction on modified techniques, and new approaches on assignments with conflicting criteria., • Interacts and collaborates with clients, contractors, and other project team members., • Attends project meetings and presents specific aspects of engineering assignments/project., • Bachelor's or Master's degree in Civil Engineering or related Engineering field., • 5-8 years' experience., • Proficiency with AutoCAD., • Proficiency with AutoCAD Civil 3D., • Proficiency with ICPR., • Proficiency with Working knowledge with EPANET, WaterCAD, StormCAD or similar software., • Ability to work cooperatively and collaboratively with all levels of employees, management, and clients., • Ability to organize work, set priorities, meet critical deadlines, and follow-up on assignments with minimal supervision., • Ability to maintain confidentially and protect privileged client information and documents appropriately., • Ability to work calmly and effectively in a high-volume office environment under pressure of heavy deadlines., • Valid drivers' license and maintenance of satisfactory driving record. There are no supervisory responsibilities associated with this position. ENVIRONMENT Work usually takes place in a clean, pleasant, and comfortable office setting. Site visits may occasionally take place in an outdoor environment. PHYSICAL REQUIREMENTS While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to sit for long periods of time. The employee is occasionally required to stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to ten (10) pounds and occasionally lift and/or move up to 40 pounds. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus. TOOL/PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTS As dictated by client site protocol, candidate will be required to utilize proper personal protective equipment including but not limited to gloves, sleeves, leather protectors, hard hats, safety vests, safety glasses and shields, hearing protection, safety shoes, covers, helmets/hoods, and any additional tools required for the task at hand. DISCLAIMER This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required for this job. Management reserves the right to make adjustments and/or assign or reassign any portion of this job description at any time with or without notice. EQUAL EMPLOYMENT OPPORTUNITY EMPLOYER AVCON, INC. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, AVCON complies with applicable state and local laws governing nondiscrimination in employment at every location in which the company has facilities. This policy applies to all terms and conditions of employment including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. AVCON expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of AVCON's employees to perform their job duties may result in discipline up to and including discharge. Please CLICK HERE and scroll down to our Benefits section to learn more about the potential Benefits you may be eligible to receive with this position. Founded in 1988, AVCON, INC. (AVCON) serves the aviation, facilities, transportation, and development industries and employs over 130 professionals with expertise in all aspects of aviation planning and design; civil, structural, electrical, mechanical, and plumbing engineering; fire protection design; utilities coordination and design; traffic planning and highway design; and a full array of design and construction support services. AVCON has built its reputation on delivering innovative and practical engineering solutions to clients, blending economic, sustainable, and technological elements into each project. Whether working on a building facility, roadway, or airfield, AVCON offers high-level technical expertise based on more than three decades of hands-on experience ensuring the job is done right the first time. AVCON prides itself on partnering with clients in Transforming Today's Ideas into Tomorrow's Reality. NOTICE TO THIRD PARTY AGENCIES: Please note that AVCON does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, AVCON will not consider or agree to payment of any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, AVCON explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of AVCON. Job Posted by ApplicantPro

Job Description JOB DESCRIPTION: • We have a Mechanical Engineer position open in Orlando, FL., • This position is responsible for mechanical engineering on large-scale projects., • Must be organized, technically competent, have effective oral and written communications, experienced in working in a multi-disciplined environment and interfacing with engineers, designers, and drafters, • Designs, develops, and implements fully integrated mechanical assembly systems to meet process requirements. As well as complying with any local or government agency design/implementation codes, • Knowledge of analyzing system design for Hazard analysis development and mitigation, • Understanding of Class 1 parts in order to minimize their need and optimize redundancy minimizing single points of failure, • Develops documents of system configuration and design. Documents include: Theory/Description of operation, Detailed mechanical system design description, system implementation/acceptance test plans, system routine maintenance/job plans, • Develops drawings of mechanical design, assemblies, and installation procedures on AutoCAD and/or SolidWorks software, • Ability to design and troubleshoot pneumatic and hydraulic control systems, • Ability to perform system analysis/calculations including: Stress, fatigue, reliability, life expectancy, tolerance studies, • Knowledge of ride system design requirements for attractions involving guest accelerations, reach envelope, ingress/egress, weight, and emergency evacuation analysis and implementation upon control system failure in worst-case scenarios, • Will assist with the initial start-up and debugging of integrated systems and the development of system documentation, • Individual will be working on system integration projects for clients in industries such as entertainment and manufacturing, • Will act as technical lead on projects and guide lower-level engineers, technicians, and contractors, • Will act as Project Manager on smaller projects ranging from $50k to $250k. This includes but is not limited to:, • Develops and executes implementation plans for the project, • Assigns work to meet overall project deadlines, • Ensures that all project team members clearly understand the scope of W-M responsibilities, • Develops schedules for W-M and customer requirements, • Evaluates progress on project(s) and details changes, • Responsible for all purchasing and subcontractor requirements, • Education Bachelors Degree in Mechanical Engineering., • Experience 10+ years in the below areas is preferred: An in-depth understanding of mechanical systems, components, stress analysis, acceleration forces, and knowledge of amusement ride safety standards (ASTM Standards). Experience with AutoCAD and SolidWorks is also desired, • Key Competencies Knowledge of contract documents and specifications. Ability to collect field data and accurately record findings. Ability to perform system design functions. Planning, Customer Focused, Timely Decision Making, Informing, Organizing, Priority Setting, Problem Solving, • Skills All employees are required to be proficient in the use of Microsoft Windows and Office environments As a 100% Employee-Owned Company our people are passionate about solving your unique engineering challenges, and with the support of industry experts behind them, they can successfully execute projects of any size while meeting your requirements of scope, schedule, and budget. Wunderlich-Malec has been providing customers with engineering, system integration and fabrication solutions for more than 40 years. With offices throughout the US and over 500 professionals on our staff, we are one of the largest and most well-established engineering companies in the United States, and we've successfully finished numerous projects for our US clients in many parts of the world. We're confident that our qualified staff has the knowledge, experience, and talent to create and deliver the solutions you need for your facility process and operation needs. Wunderlich-Malec ranks on Inc. 5000's Fastest-Growing Private Companies list and is a GSA Schedule holder with the Federal Government for professional engineering services and manufacturing.

Job Description Gencor Industries is looking for an enthusiastic self-starter who drives projects to completion. Gencor Industries a leading producer of combustion technologies and engineered systems used in industrial processing equipment, aggregate drying, and material handling industries is seeking qualified electrical engineering candidates. POSITION: Electrical Engineer LOCATION: Orlando, Florida (MUST LIVE IN ORLANDO or surrounding area - no relocation - contact and apply only after relocated). ROLE: The Electrical Engineer is part of a dynamic team and is responsible for the design and documentation of electrical components and systems for hot mix asphalt plants. The role creates custom engineered plant designs to meet customer specifications utilizing Draftsight. The candidate will be responsible to manage and track all assigned projects, including coordination of activities with production and quality control departments. This position reports to the Electrical Engineering Department Manager. PRIMARY RESPONSIBILITIES: Member of an integrated engineering design team with responsibilities that include the design and integration of all manual and automatic controls necessary for asphalt plant operation Schematic design of digital and analog asphalt plant controls Creation of production BOMs Create 2D layout and wiring diagrams of control hardware in Draftsight Responsible for component selection and testing, such as temperature/limit controllers, HMI panels, and PLC controllers Adherence to quality assurance and safety protocols Provide technical direction to designers and drafters Provide technical project management of assigned projects Responsible for meeting engineering milestones of project schedules Work effectively with other departments including sales, production control, manufacturing, quality control, and customer service QUALIFICATIONS: Bachelor’s degree in Electrical Engineering 5+ years of experience in electrical design 2+ years of experience in industrial automation design Experience with PLC programming Experience with Rockwell Automation products and software tools is a plus Strong analytical skills The ability to travel as needed to perform the functions of the position · Permanent resident of the US Pay is based on experience and Gencor offers competitive benefits, including medical, dental, vision, 401k matching, paid time off and more. Job Type: Full-time Benefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Vision insurance Experience: • Electrical engineering: 5 years (Required) Language: • English (Required) Location: • Orlando, FL 32810 (Required) Ability to Relocate: • Orlando, FL 32810: Relocate before starting work (Required) Work Location: In person

Job DescriptionSalary: $27-$32 Hourly Job Summary We are seeking a skilled Project Engineer to join our team. The Project Engineer supports the successful execution of electrical construction projects by providing technical expertise, coordinating project tasks, and assisting with design, planning, and implementation. While this role does not require an engineering degree, it demands a strong understanding of electrical systems, construction processes, and technical documentation. The Project Engineer acts as a key link between Project Managers, Superintendents, field teams, and external stakeholders to ensure projects are completed on time, within budget, and in compliance with quality and safety standards. Key Responsibilities: Technical Support Review electrical drawings, specifications, and design documents to ensure alignment with project requirements. Provide technical guidance to field teams and resolve on-site issues related to installation, materials, or design discrepancies. Prepare and submit technical submittals, RFIs, and shop drawings for review and approval. Assist in troubleshooting electrical installations and identifying solutions for technical challenges. Project Coordination Collaborate with the Project Manager to develop and maintain project schedules, work plans, and resource allocations. Track project progress, monitor key milestones, and ensure technical accuracy in implementation. Coordinate with vendors, subcontractors, and suppliers to ensure timely delivery of materials and compliance with technical standards. Ensure that field teams are working with the latest approved construction documents. Documentation and Reporting Maintain accurate records of project activities, including daily reports, installation logs, and test results. Assist in the preparation of closeout documentation, including as-built drawings, warranty submissions, and punch lists. Update and maintain project trackers to monitor progress and completion metrics. Material Management Review material takeoffs and verify quantities to ensure proper procurement and delivery for project needs. Track material usage on-site and identify discrepancies between actual and forecasted quantities. Verify the appropriate tools and materials are available for field teams and address any inconsistencies. Compliance and Quality Control Ensure all installations meet electrical codes, safety regulations, and project specifications. Conduct inspections and quality checks to verify compliance with design and performance standards. Support the safety team by ensuring technical adherence to safety protocols. Communication Act as a liaison between Project Managers, Superintendents, field teams, and external stakeholders, ensuring smooth communication and resolution of technical issues. Participate in project meetings and provide updates on technical aspects of the project. Support collaboration between office and field . Minimum Qualifications High school diploma or equivalent required; associate's or technical degree in construction management, electrical technology, or a related field preferred. Minimum 3-5 years of experience in electrical construction or a related technical field. Preferred Qualifications Strong understanding of electrical systems, installations, and construction processes. Proficiency in reading and interpreting electrical blueprints, schematics, and technical specifications. Familiarity with construction management software (e.g., Procore) and standard office tools (e.g., Microsoft Office Suite) and Accubid. Excellent problem-solving skills and attention to detail. Strong organizational and time-management skills to handle multiple tasks simultaneously. Bilingual (Spanish preferred). Skills and Attributes Ability to communicate technical information clearly to diverse audiences. Demonstrated ability to work collaboratively in a team environment. Strong analytical skills and a proactive approach to problem-solving. High level of accountability and professionalism. Join us as an Electrical Project Engineer where your expertise will contribute significantly to our operations, ensuring that we deliver high-quality service to our clients while maintaining safety standards in all aspects of our work.

Job Description Job Title: Systems & Propulsion Engineer Employment Type: Full-Time Classification: Exempt Reports To: Engineering Team Leader Pay Range: $65,000 - $85,000 (Compensation is based on a combination of your skills, background, and the needs of the role) Location: Orlando, Florida Why Regal? For over five decades, Regal Boats has been a beacon of excellence in the boating industry. As a family-owned and operated company since 1969, we take immense pride in our tradition of craftsmanship and quality. With a dedicated team of 700+ skilled members, we have continued to innovate and build stunning 20-50 foot boats that embody the essence of luxury and performance. What sets Regal Boats apart is our status as a privately owned company, allowing us to stay true to our values and focus on our team members. We believe in the power of nurturing our team, fostering a culture of growth, and offering advancement opportunities. At Regal Boats, your passion for boating and dedication will be rewarded with a fulfilling and dynamic career journey. Our Purpose: Honor God & Enrich Lives. Our Mission: With God’s help we will develop an exceptional team dedicated to enriching lives and providing an awesome boating experience. JOB DESCRIPTION Summary Regal Boats is seeking a motivated self-starter to join our team as a Systems & Propulsion Engineer. This role is responsible for designing, integrating, and validating critical onboard systems across our luxury recreational boats, including express cruisers, bowriders, surf series, and center console hybrids. The ideal candidate will ensure seamless system functionality, reliability, and compliance with industry standards. This position will be involved in concept development, prototyping, product introduction, and market adoption across the entire Regal product line from 20’-50’. Key Responsibilities 1. Systems Design & Integration • Tactical owner of systems design for Regal Boats., • Develop and integrate propulsion, stereo, navigation, plumbing, generator, water, waste, fuel, steering, and control systems., • Collaborate with mechanical, electrical, and structural engineering teams to ensure efficient system layouts., • Optimize system placement and weight distribution to enhance performance, efficiency, and serviceability., • Work closely with vendors to select, test, and validate components for production., • Assist in the integration of marine electronics, lighting, and onboard automation. 2. Compliance & Testing • Ensure designs meet ABYC, NMMA, USCG, ISO, and CE requirements., • Conduct DFMEA, risk assessments, and system validation testing., • Validate all new models for performance and reliability through prototype testing, troubleshooting, and failure analysis., • Support on-water testing, system calibration, and diagnostics. 3. Collaboration & Project Management • Work with design, manufacturing, and service teams to ensure smooth product launches., • Assist in supplier coordination, cost analysis, and component selection., • Develop and maintain technical documentation, system manuals, and installation guides., • Ensure vendors conduct training and perform Certificates of Inspection (COIs) as needed., • Represent Regal in a professional, ethical, and socially responsible manner. Required Qualifications • Bachelor’s degree in Naval Architecture, Mechanical Engineering, Electrical Engineering, Marine Engineering, or a related field., • 3+ years of experience in marine systems engineering, preferably in boat building or OEM manufacturing., • Proficiency in 3D CAD software (Rhino- preferred, SolidWorks, Siemens NX, Catia, Pro-E, or AutoCAD)., • Knowledge of marine propulsion, fuel systems, electrical networks, and onboard systems., • Strong understanding of ABYC, USCG, and NMMA regulations., • Experience with systems troubleshooting, root cause analysis, and failure mode testing., • Experience in common platform engineering for multi-model product lines., • Experience with diagnostics, repair, and integration of Volvo, Yamaha, and Mercury propulsion systems, • Knowledge of surf and ballast systems for tow boats, • Boat experience (20’ - 50’)., • Hands-on experience with on-water testing, including Ocean Testing, Performance Testing, Component Sea trials (Gyros, Windlass, Thrusters, etc.), • Experience with testing software and data collection software (Dewesoft - preferred), • System calibration and diagnostics expertise., • Professional memberships in industry organizations such as ABYC., • Strong problem-solving, project management, and cross-functional collaboration skills. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to bend at the waist and knees and stand for extended periods of time. The employee is frequently required to climb into and out of the boats using stairs. The employee must frequently be able to lift 50 pounds, work 10-hour days with most of the time being on their feet, and work overtime, whether planned or unplanned. Must be able to, with or without correct close vision, adjust focus, and distinguish between different colors. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. EEO Statement Regal Marine Industries, Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Regal Marine Industries, Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation, and training. Regal Marine Industries, Inc. expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of Regal Marine Industries, Inc.’s employees to perform their job duties may result in discipline up to and including discharge. This job offer is contingent upon passing a mandatory pre-employment drug test and the receipt of background results that are in compliance with the current company policy.

Job DescriptionSenior Mechanical Engineer Location: Orlando, FL Position Overview We are seeking an experienced Senior Mechanical Engineer to lead the mechanical design and execution of large-scale, complex projects. In this role, you will own mechanical systems from initial concept through installation and commissioning, applying deep technical expertise in system design, analysis, safety, and integration. This position offers the opportunity to work on high-impact projects in a multidisciplinary environment where safety, reliability, and innovation are paramount. Key Responsibilities • Lead mechanical system design from a blank sheet of paper, developing concepts and detailed designs that meet project requirements., • Perform engineering analyses and calculations, including stress, fatigue, load, acceleration, reliability, life expectancy, and tolerance studies., • Design safety-critical components and implement redundant mitigation strategies to enhance system safety and reliability., • Develop mechanical systems involving complex motion and integration with automated systems., • Create and maintain 3D models and detailed designs using CAD software (SolidWorks preferred)., • Collaborate closely with multidisciplinary teams to support system integration and design modifications., • Manage vendor scope and ensure compliance with contractual, safety, and functional requirements., • Ensure designs comply with applicable local, government, client, and industry codes and standards., • Conduct technical risk assessments and develop mitigation strategies., • Design, analyze, and troubleshoot pneumatic and hydraulic systems., • Support mechanical system installation, commissioning, and acceptance testing, including off-shift support as required., • Bachelor’s degree in Mechanical Engineering required., • 10+ years of progressive experience in mechanical engineering roles., • Minimum of 3+ years of experience designing systems from scratch or performing major system redesigns (50%+ redesign)., • Demonstrated experience applying GD&T to large-scale or high-duty-cycle systems with fatigue considerations., • Experience with ASTM standards, safety engineering, and the attractions industry is strongly preferred., • Knowledge of ride system design for guest-facing attractions is a plus.Core Competencies, • Strong system-level design and analytical skills, • Excellent written and verbal communication, • Highly organized with strong planning and prioritization abilities, • Effective problem solver and decision-maker, • Comfortable working in fast-paced, multidisciplinary environments, • Customer-focused with attention to detail and qualityTechnical Skills, • Proficiency in Microsoft Windows and Microsoft Office applications, • Experience working with 3D CAD and mechanical analysis toolsTravel & Work Environment, • Travel: Up to 30% in peak project periods (historically closer to 10%)., • Work Location: Primarily on-site at client locations (5 days per week)., • Environment: Office, on-site industrial, and construction environments.Physical & Working Requirements, • Ability to see (including color perception), hear, speak clearly, and perform fine motor tasks., • Ability to lift, climb, push, pull, drive, and safely mount/dismount equipment as required., • Frequent computer and office equipment use.

Job DescriptionMission The mission of Speechify is to make sure that reading is never a barrier to learning. Over 50 million people use Speechify's text-to-speech products to turn whatever they're reading – PDFs, books, Google Docs, news articles, websites – into audio, so they can read faster, read more, and remember more. Speechify's text-to-speech reading products include its iOS app, Android App, Mac App, Chrome Extension, and Web App. Google recently named Speechify the Chrome Extension of the Year and Apple named Speechify its 2025 Design Award winner for Inclusivity. Today, nearly 200 people around the globe work on Speechify in a 100% distributed setting – Speechify has no office. These include frontend and backend engineers, AI research scientists, and others from Amazon, Microsoft, and Google, leading PhD programs like Stanford, high growth startups like Stripe, Vercel, Bolt, and many founders of their own companies What You'll Do • Lead the design, architecture, and development of native Windows desktop applications using Windows App SDK, WinUI (or related UI frameworks), C#, XAML, and — when needed — C++., • Define and enforce best-practices for Windows desktop development across the codebase: code architecture, performance, memory usage, responsive UI, cross-version compatibility (Windows 10/11+), and maintainability., • Drive accessibility efforts: integrate and validate support for accessibility APIs (e.g. Microsoft UI Automation or other relevant Windows accessibility frameworks), ensure UI controls, focus management, keyboard navigation, screen-reader support, and usability for users with disabilities., • Collaborate closely with product designers, UX researchers, QA, and other stakeholders to shape feature planning, UI/UX architecture, and long-term roadmap for the Windows platform., • Take ownership of full lifecycle of features: conception → design → implementation → testing → release → maintenance. Ensure quality, reliability, and consistency across releases., • 3+ in Windows desktop application development using Windows App SDK, WinUI (or similar), C#, XAML — and ideally additional experience with native Windows code (C++, Win32/WinRT/COM)., • Deep understanding of Windows application architecture, including interop between managed code (.NET) and native code., • Proven track record of designing, building, and shipping production-quality desktop applications, with an emphasis on reliability, performance, scalability, and maintainability., • Strong experience with accessibility APIs on Windows (e.g. Microsoft UI Automation or similar), and a dedication to building accessible and inclusive software., • Excellent software engineering fundamentals: OOP, design patterns, data structures, algorithms, memory management, multi-threading or asynchronous programming (where relevant)., • Experience leading technical design, mentoring other engineers, conducting code reviews, and making architecture-level decisions., • Strong communication skills; ability to articulate tradeoffs, collaborate with cross-functional teams, and drive consensus., • Experience with writing automated tests for UI — unit tests, integration tests, UI automation tests; familiarity with relevant testing frameworks., • Experience with performance optimization for desktop apps (memory usage, startup time, rendering performance, high-DPI support, responsiveness under load)., • Experience with localization/globalization, right-to-left UI support, internationalization, accessibility for multiple regions., • Familiarity with telemetry, analytics, crash reporting, logging, and error monitoring in desktop applications., • Previous experience in shaping CI/CD workflows, release pipelines, and deployment strategies for desktop applications., • A high-impact role: you will define architecture, shape the future of our Windows product, and directly influence what millions of users see and experience., • A collaborative, flat-structure engineering culture — you are not just a coder, but a builder and a decision-maker., • Opportunities to lead — mentor others, steer technical direction, and grow into broader technical leadership (e.g. Tech Lead, Architect)., • Flexibility, autonomy, and responsibility: you define how to solve problems, own features end-to-end, and contribute to long-term product vision. Think you're a good fit for this job? Tell us more about yourself and why you're interested in the role when you apply. And don't forget to include links to your portfolio and LinkedIn. Not looking but know someone who would make a great fit? Refer them! Speechify is committed to a diverse and inclusive workplace. Speechify does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

Job Description General Definition of Work This position provides highly technical mechanical and industrial engineering design and project management work remotely and onsite to many types of power generation facilities located throughout Florida. The role will lead and manage project management and/or oversight, at power generation facilities for specific outage and efficiency improvement projects. The role also will involve modeling and design related to mechanical, thermodynamic, fluid, piping & structural engineering. The role may need to manage multiple overlapping projects and be required to develop scope for procurements or outsourcing. This position will assess and remediate equipment failures in an expedited and timely manner. The role could be required to support projects that may be driven by NERC compliance requirements. The position will assist with efficiency and reliability design and projects to enhance the reliability of the FMPA fleet. Work is performed under the limited supervision of the Power Generation Engineering Director. Qualification Requirements To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Essential Functions Manage completion of assigned programs and work processes Leads and performs work associated with projects as assigned onsite and remotely at FMPA sites throughout Florida. Works regularly with plant staff and plant management on efficiency, reliability, and improvement projects Monitors plant project plans for progress, scope and budget. Works with plant management to understand variances or reasons projects can become behind schedule and adjusts as necessary. With strong knowledge and experience the position will model, design and engineer solutions related to mechanical, thermodynamic, fluid, piping and structural engineering. Makes field investigations of existing facilities Assists in estimation and budgeting of plant projects within budgetary Class 4 estimates with up to 15% design requirements known Develops detailed scope requirements to support FMPA procurement or outsourcing needs related to assigned projects. Ensures procurement timelines are sufficient to address required lead times in accordance with plant outage schedules. Perform root cause determinations of generating unit and auxiliary equipment failures. Prepares specifications for maintenance outages, equipment repairs and upgrade projects for all FMPA generation facilities. Work together with plant management and staff to plan and engineer modifications to existing plant configuration and equipment or system upgrades. Completes economic justifications for potential projects. Prepare scope descriptions and specifications as required. Ensure that plant drawings are properly organized and updated as required. Works with plant management to ensure adherence to change management processes. Performs diagnostic work and coordinates with equipment manufacturers and vendors in support of returning generation units to service Extract, comprehend and develop instructions from technical manuals, journals, and drawings, technical literature and other job-related material; and to effectively communicate orally and in writing using the English language. Possess independent decision-making capabilities in stressful situations with minimum supervision. Continual review and improvement to all work processes and procedures. Extended travel to plant sites will be required as necessary. Knowledge, Skills and Abilities Thorough knowledge of the principles and practices of mechanical engineering. Knowledge of the principles and methods involved in the design, construction and operation of natural gas fired electric power generation facilities, and turbo machinery. Knowledge in the use of computers and mechanical engineering modeling software. Ability to coordinate the activities of contract personnel, write project scopes and contract language. Must be able to use personal protection equipment properly and safely as directed or assigned. On occasion will be exposed to adverse weather and operating conditions. Occasionally may need to climb ladders and stairways. Must be comfortable being exposed to confined spaces and elevated areas. Expected to assist power plant personnel in emergency situations and/or hurricane response or recovery. Must be able to maintain good program records and filing systems. Must have good analytical and problem-solving skills. Ability to establish and maintain effective working relationships with all FMPA Power Plant personnel, the public and associated business affiliates. Ability to communicate effectively, both orally and in written form. Education and Experience Graduation from an accredited college or university with a bachelor’s degree in mechanical engineering. A Florida Professional Engineer (PE) license is highly valued. Minimum working experience of ten plus years in the Power Generation industry which should include direct experience with contractors, power plant or heavy industrial maintenance and operations experience. Extensive experience in steam generation, gas turbines, steam turbines and their auxiliaries coupled with exposure to operations and maintenance practices and procedures. Proficiency in CAD software (SolidWorks, AutoCAD, etc.), experience with analysis tools (FEA, CFD), and strong knowledge of engineering principles (thermodynamics, fluid dynamics, stress analysis, etc.) Experience with maintenance management systems and advanced project tracking software, outage planning and support. Extensive experience with RCA and MOC process and procedures. Physical Requirements This work requires the occasional exertion of up to 75 pounds of force; work regularly requires sitting, speaking or hearing and using hands to finger, handle or feel, frequently requires walking and repetitive motions and occasionally requires standing, climbing or balancing, stooping, kneeling, crouching or crawling, reaching with hands and arms, tasting or smelling and pushing or pulling; work has standard vision requirements; vocal communication is required for expressing or exchanging ideas by means of the spoken word; hearing is required to perceive information at normal spoken word levels; work requires preparing and analyzing written or computer data, visual inspection involving small defects and/or small parts, using of measuring devices, operating motor vehicles or equipment and observing general surroundings and activities; work occasionally requires wet, humid conditions (non-weather), working near moving mechanical parts, working in high, precarious places, exposure to fumes or airborne particles, exposure to toxic or caustic chemicals, exposure to outdoor weather conditions, exposure to extreme cold (non-weather), exposure to extreme heat (non-weather), exposure to the risk of electrical shock and exposure to vibration; work is generally in a moderately noisy location (e.g. business office, light traffic). The ability to discern the colors red, green, amber and blue as used in troubleshooting electrical diagrams, control system process and in color coding used in electronic and electrical component repairs. The ability to lift weights or twist with a force of up to 75 pounds, as in the removal and replacement of access doors to equipment, turning of valves, hoisting of material overhead. Working in Confined spaces and at heights, as in entering internal areas of the turbine for inspection or repairs during outages, climbing ladders to gain access, working within tight quarters of surrounding piping and conduit to perform troubleshooting functions. Special Requirements May require possession of, or ability to obtain, specific licenses and/or certifications depending on departmental assignment. Must meet and maintain all training and education requirements for position. Last revised: 11/26/2025

Job Description AA Metals, Inc. is one of the largest and fastest growing distributors of quality aluminum and stainless products with four operational centers globally. We source from mills around the world and stock metals in our strategically located warehouses in North America. We have twice been recognized by Inc. Magazine as one of the fastest growing U.S. companies. With a strong focus on excellence, innovation, and customer satisfaction, we are dedicated to sourcing and delivering metal solutions that meet the diverse needs of our clients. IT Software Engineer Position Summary The position of Software Engineer is to support and enhance our technology platforms at a metal distribution company based in Orlando. This role will play a key part in developing internal applications, integrations, and reporting solutions, with a strong focus on the NetSuite ERP system. The ideal candidate will work closely with operations, finance, sales, and leadership to improve system efficiency, data accuracy, and business workflows. IT Software Engineer Benefits • Competitive compensation, • Low-cost United Healthcare health insurance premiums, • Employer paid short/long term disability insurance, • 401k with matching, financial planning advisor service, • Tuition reimbursement program, • Hybrid work schedule, • Maternity leave flexibility Design, develop, and maintain software solutions supporting business operations, including inventory, purchasing, sales, logistics, and finance * Customize, configure, and support the NetSuite ERP platform (SuiteScript, workflows, saved searches, roles, and permissions) * Develop and maintain integrations between NetSuite and third-party systems (e.g., EDI partners, shipping systems, CRM, BI tools) * Troubleshoot and resolve application, system, and data issues across the ERP and related platforms * Collaborate with business stakeholders to gather requirements and translate them into technical solutions * Create and maintain technical documentation, system diagrams, and user guides * Support data analysis, reporting, and dashboards to improve visibility into operational and financial performance * Participate in system upgrades, testing, and deployment of new features * Ensure system security, performance, and scalability * Provide support for standard business software applications (e.g., Microsoft Office, collaboration tools, line-of-business applications). * Assist with software installations, upgrades, licensing, and troubleshooting * Work with application owners and vendors to resolve technical issues * Support basic scripting or automation tasks as needed * Provide technical support for software-related issues * Document system configurations, procedures, and troubleshooting steps * Follow IT best practices for security, compliance, and change management. IT Software Engineer Qualification Requirements Education * Bachelor’s degree in Computer Science, Information Systems, or a related field (or equivalent experience) * 3+ years of experience as a Software Engineer or ERP-focused developer * Hands-on experience with NetSuite ERP, workflows, and saved searches * Strong proficiency in at least one general-purpose programming language (e.g., JavaScript, Python, C#, or Java) * Experience working with APIs, web services (REST/SOAP), and system integrations * Solid understanding of relational databases and SQL * Strong problem-solving skills and attention to detail * Ability to communicate effectively with both technical and non-technical stakeholders Preferred Qualifications * Experience in distribution, manufacturing, or supply chain environments * Familiarity with EDI, inventory management, and warehouse operations * Experience with reporting/BI tools and data visualization * NetSuite certifications (Administrator, SuiteFoundation, or Developer) * Experience supporting cloud-based or SaaS applications

Job DescriptionSalary: The Integration Engineer supports fielding, integration, and test execution activities for system refreshes at DoD Live Training Facilities. This role requires a hands-on engineer capable of integrating hardware, software, and networking components while assisting in formal test events and on-site system verification across multiple Army installations. The position is field-intensive and requires frequent travel to sites for support installation, integration, testing, cybersecurity coordination, and Government Acceptance Testing (GAT). The successful candidate is comfortable operating in dynamic field environments and supporting multiple technical disciplines as part of an integrated team. Primary Responsibilities • Integrate subsystems, including servers, workstations, Video System Suite, networking infrastructure, and supporting peripherals., • Support integration of Government Furnished Information (GFI) software and ensure compatibility with refreshed hardware., • Assist with rack-and-stack, cabling, labeling, system imaging, and baseline configuration activities., • Configure and validate LAN infrastructure, including VLANs, routing, and network connectivity., • Diagnose and resolve hardware, software, and network integration issues during fielding and test activities., • Execute approved test procedures in accordance with test plans, collect test data, document results, and assist with the resolution of test discrepancies., • Participate in the execution of Baseline Tests, In-Plant Tests, Contractor Tests, Test Readiness Reviews (TRR), and Government Acceptance Tests (GAT)., • Provide on-site technical support during training, testing, and transition activities., • Coordinate with systems, configuration management, network, cybersecurity, and test personnel to support successful site fielding and acceptance. Qualifications Required: • Bachelors degree in Engineering, Computer Science, Information Technology, or related technical field (or equivalent experience)., • 3-5 years of experience in system integration, fielding, or test support for complex IT or DoD systems., • Hands-on experience with:, • Server and workstation integration, • Windows and/or Linux operating systems, • Network fundamentals (switching, VLANs, IP addressing), • Ability to work independently in field environments with minimal supervision., • Willingness and ability to travel extensively (up to 75%) to multiple CONUS installation sites., • Ability to lift and move IT equipment (up to 50 lbs) and work in rack environments., • Experience supporting DoD training, simulation, or instrumentation systems., • Familiarity with configuration management and baseline control in a DoD environment., • Experience supporting testing events like Government Acceptance Testing (GAT). Location: The home office is in Orlando, FL, but it is a field-intensive role. This position requires frequent travel to CONUS Army installations. Relocation assistance is not offered for this position. Status of Position: Full-time, Exempt

Job DescriptionSystems Engineer – MBSE Army Next-Generation Constructive Simulation Program We are seeking a Systems Engineer with experience in Model-Based Systems Engineering (MBSE) to support the Army’s Next-Generation Constructive effort. Ideal candidate will use MagicDraw and other MBSE tools to document the system. Responsibilities • Apply MBSE best practices to design, develop and maintain system requirements, design and models using MagicDraw., • Perform requirements analysis, requirements definition, requirements management, functional analysis, performance analysis, system design, detail trade studies, systems integration and test (verification), validation and interface definition studies of subsystem or system elements under supervision of the lead engineer, • Support the generation of technical engineering products by using the appropriate standards, processes, procedures, and tools throughout the system development life cycleSkills, • Strong technical background in architecture development, functional decomposition and allocation of requirements (performance, functional and interface definition) with system-modelling tools., • Ability capture requirements, behaviors, structures, interfaces, and constraints in MBSE tools, • Model-Based Systems engineering (MBSE), • Cloud(Azure, AWS) experience and/or certifications, • UML, SysML, • Cybersecurity (Sec+, etc.) certifications, • Collaborate with software, simulation, and domain engineers to ensure model alignment with implementation.Qualifications, • Bachelor’s degree in Systems Engineering, Engineering, Computer Science, or a related field., • 5+ years of systems engineering experience, with at least 3+ years in MBSE., • Proficiency with MagicDraw., • Experience supporting Army simulation programs., • Strong understanding of MBSE principles., • Ability to communicate technical concepts clearly to both technical and non-technical stakeholders. At nFocus Solutions, we are committed to a diverse and inclusive workforce. We believe that great minds think differently. We value diversity of backgrounds, beliefs, and interests, and we recognize diversity as an important source of innovation. nFocus Solutions is an equal opportunity employer and does not discriminate based on race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. Powered by JazzHR LMrlRQbCbg

Job Description Optimal Solutions & Technologies (OST, Inc.) is focused on excellence. We specialize in providing Management Consulting, Information Technology, and Research Development and Engineering services. The fundamental distinction of the OST team is its business knowledge in both the public and private sectors. We serve the aerospace & transportation, association & nonprofit, defense, education, energy, financial, healthcare, and technology & telecommunications industries. OST is successful because we listen to our clients, we learn from our clients, and we know our clients. Sr. Fielding Support / Network Engineer Description of specific duties in a typical workday for this position: • The Fielding Support / Network Support Engineer provides technical engineering and operational support for the fielding, integration, configuration, and sustainment of training, simulation, instrumentation, and networked systems in support of Government programs. This role supports both pre-deployment preparation and on-site fielding activities to ensure systems are installed, configured, tested, and operational in accordance with contractual requirements and Government standards., • Responsibilities include supporting system fielding events, coordinating site readiness activities, and performing network configuration, troubleshooting, and performance validation. The engineer assists with integration of hardware, software, and network components; supports system setup, checkout, and verification; and resolves technical issues impacting system availability or performance., • The Fielding Support / Network Support Engineer provides on-site and remote network support, including configuration and maintenance of routers, switches, servers, and associated network infrastructure. The role supports secure network connectivity, data flow, and interoperability in compliance with Government cybersecurity and information assurance requirements., • Additional duties include supporting Government Acceptance Testing (GAT), site acceptance activities, and field exercises; documenting configurations, issues, and resolutions; supporting after-action reviews and lessons learned; and coordinating with program offices, engineers, cybersecurity personnel, and contractors to ensure successful fielding and sustainment. Requirements (Years of experience, Education, Certifications): • Bachelor’s degree in data science, Computer Science, Information Systems, Engineering, Mathematics, Statistics, or a related technical field, • Minimum of 4 years of experience supporting fielding, networking, or systems integration activities, • Demonstrated experience with:, • Network configuration, troubleshooting, and sustainment, • Fielding and integration of networked systems, • Hardware and software installation and checkout, • Supporting on-site technical operations and field events, • Active Secret security clearance, • Must be authorized to handle Controlled Unclassified Information (CUI) Additional Requirements • Ability to travel in support of fielding events and on-site operations Nice to Have (skills that are not required, but nice to have): • Experience supporting DoD or Army training and simulation environments, • Familiarity with Government fielding processes and acceptance testing, • Knowledge of network security, information assurance, and RMF concepts, • Experience operating in deployed or field environments This is a full-time position paying a base salary, full benefits, and has possible bonus potential based on merit and performance. To be considered for this position, please apply online with a resume. OST is an equal opportunity employer. Applicants are considered for positions without regard to race, religion, gender, native origin, age, disability, or any other category protected by applicable federal, state, or local laws.

Job DescriptionDescription: Information Operations (IO) SME / Systems Engineer Location: Orlando, FL (Hybrid On-Site Flex) Clearance Required: Active TS/SCI Travel: 25–33% Employment Type: Full-Time Position Summary The IO SME / Systems Engineer will provide operational and technical expertise supporting the design, integration, and synchronization of Information-Related Capabilities (IRCs) across the full spectrum of Information Operations. The ideal candidate brings deep experience in military IO processes, strong communication skills, and the ability to translate operational needs into technical requirements supporting next-generation information systems. Key Responsibilities • Serve as the subject matter expert on Information Operations planning, integration, and execution across joint and service-specific frameworks., • Conduct Information Environment Analysis (IEA) and synchronize IRCs—including PSYOP, MILDEC, MISO, Civil Affairs, and Public Affairs—within operational and targeting processes., • Support the design and development of tools, architectures, and analytical products enabling IO, MISO, and related capabilities., • Provide systems engineering expertise for the definition, modeling, and integration of IO requirements into system designs and mission workflows., • Develop and maintain system documentation (requirements, use cases, design diagrams, test plans)., • Collaborate with software and systems teams using Agile or DevSecOps methodologies., • Engage with government stakeholders to brief concepts, demonstrate tools, and support integration events. About CyOne, Inc. CyOne is a non-traditional small business specializing in agile software development, ISR integration, and cyber mission support for defense and intelligence customers. Our experienced team builds practical, mission-oriented tools that directly support warfighters and analysts in the field. What We Offer • Competitive Compensation and Bonus Opportunities, • Full Benefits Package (medical, dental, vision, 401k match), • Paid Time Off and Flexible Scheduling, • Collaborative, high-performance technical team, • 8–12 years of experience in Information Operations or a related field (PSYOP, MILDEC, MISO, Civil Affairs, Public Affairs, or Information Warfare)., • Strong understanding of IO staff processes, including planning, integration, and synchronization of IRCs., • Experience conducting or supporting Information Environment Analysis and integration of IRCs into targeting processes., • Excellent interpersonal, communication, and briefing skills; comfortable presenting to senior leaders and large groups., • Bachelor’s degree in a STEM field (or currently pursuing)., • Active TS/SCI clearance., • Ability to work flexibly in a hybrid environment; some weeks may require 4–5 days onsite for meetings or exercises, while others may be primarily remote., • Ability to travel 25–33%. Preferred Qualifications • U.S. Army Information Operations experience., • Bachelor’s degree in Software Engineering, Computer Science, or Electrical Engineering., • Experience with Model-Based Systems Engineering (MBSE), UML, or SysML., • Familiarity with Agile or DevSecOps frameworks., • Experience with cloud platforms (AWS, Azure) and/or cloud certifications., • Security+ or other cybersecurity certifications.

Job Description100% REMOTE Senior Ruby on Rails Engineer / Senior Full Stack Developer Needed for Growing Fintech Company! This Jobot Job is hosted by: Reed Kellick Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $150,000 - $185,000 per year A bit about us: We are a growing fintech company that is on the lookout for a 100% remote Senior Full Stack Engineer / Senior Ruby Developer! Why join us? As a Senior Fullstack Engineer / Senior Ruby Engineer in our company, we are able to offer: • A competitive base salary between $150k and $185k, depending on experience!, • 8% annual bonus!, • Attractive equity!, • Flexible time off policy!, • 100% premium coverage for employees!, • Employer HSA contributions! Job Details As a Senior Software Engineer / Senior Software Developer on our team, we are looking for: • Proven Ruby on Rails background, • Strong React / Reactjs / React.js experience, • Multiple years of professional Full-Stack experience, • Willingness to do a 60 minute Ruby/React exercise upfront as the first step of the hiring process, • Current residence in AZ, CO, IL, MD, TX, VA, DC, CA, FL, MA, MN, NY, OR, WA, or WI Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.

Job Description You in This Role As an FPV Drone Systems Engineer at Unusual Machines, you will be responsible for building, configuring, tuning, and supporting FPV drones for enterprise customers. You’ll work hands-on with flight controllers, receivers, ESCs, video systems, and airframes to deliver reliable, high-performance drone configurations tailored to customer needs. This role sits at the intersection of FPV flight performance, system integration, and customer requirements. You’ll immediately contribute to active customer projects, then continue refining standardized configurations and processes that scale across enterprise and manufacturer partnerships. This is a highly practical, impact-driven role for someone who thrives in fast-moving environments and enjoys solving complex FPV challenges. A Day in the Life • PID and filter tuning for FPV drones, • Building, configuring, and validating FPV drone systems, • Diagnosing receiver, control, and video issues—often remotely, • Configuring drones using Betaflight and related flight control software, • Organizing project files, configurations, and documentation, • Collaborating with cross-functional teams to meet tight project deadlines, • Communicating technical guidance to users with varying levels of FPV experience What You’ll Do • Build, configure, and tune FPV drones for enterprise customer applications, • Perform PID tuning, filter tuning, and flight performance optimization, • Configure and troubleshoot flight controllers using Betaflight, • Diagnose and resolve receiver, radio, and FPV video system issues, • Develop standardized drone configurations aligned with customer needs, • Support project planning, documentation, and delivery tracking, • Work with manufacturers to communicate customer requirements and technical feedback, • Travel domestically for training programs and on-site support as needed What You’ll Bring Required: • Strong FPV drone experience using Mode 2 controls, • Advanced working knowledge of Betaflight, • Deep understanding of FPV drone components and system integration, • Hands-on experience with PID and filter tuning, • Ability to troubleshoot and diagnose issues without always having physical access to the drone, • Experience with INAV, PX4, or ArduPilot / Mission Planner, • Enterprise, defense, or commercial drone experience, • Direct impact on enterprise and customer-facing FPV drone solutions, • Hands-on ownership of drone configurations used in real-world applications, • Close collaboration with engineering, manufacturing, and customer-facing teams, • Exposure to manufacturer partnerships and product direction discussions Compensation & Benefits • Competitive compensation package, • Comprehensive benefits including medical, dental, and vision, • 401(k), • Unlimited PTO, • Catered lunches for all employees every day of the week Unusual Machines is a U.S.-based drone and drone parts company focused on the small and First-Person View (FPV) segments of the drone market. Our brands - Rotor Riot and Fat Shark - are two of the most respected names in FPV and have helped shape the industry through e-commerce, product development, and a deep connection with the pilot community. We’re expanding into enterprise and defense - bringing our obsessive attention to performance, design, and U.S.-based manufacturing into high-stakes environments like search and rescue, STEM education, and military innovation. With several of our products already approved by the Defense Innovation Unit, we’re solving procurement issues for customers who demand speed, agility, and compliance. If you love working at the intersection of community, content, and cutting-edge technology, you’ll feel right at home here. We are an equal opportunity employer that does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. Unusual Machines participates in E-Verify. E-Verify is an Internet-based system that compares information from an employee's Form I-9, Employment Eligibility Verification, to data from U.S. Department of Homeland Security and Social Security Administration records to confirm employment eligibility. We unfortunately cannot offer visa sponsorship for this position.

Job DescriptionSenior Test Engineer (Software/Hardware) Senior Test Engineer (Software/Hardware) Company Overview We are located in Olando, FL (Near UCF) and we are a leading electronics manufacturer and supplier of advanced technologies primarily in the aerospace and military/defense industries. We work with some of the most high-performing and cutting-edge technologies on the market. Our products vary from military air crafts to heart monitors to smartphones, so we can promise the work will never get boring or stale! Position Overview We are seeking a Senior Test Engineer to join our team, responsible for developing and executing test plans for both software and hardware components. The ideal candidate will ensure the reliability and performance of our products while collaborating with cross-functional teams to drive quality improvements. Key Responsibilities • Design and implement test plans for software and hardware products., • Perform testing and validation of RF and electronic components., • Utilize test equipment such as oscilloscopes, spectrum analyzers, and multimeters to conduct tests., • Collaborate with engineering teams to identify and resolve defects., • Develop automated test scripts using C++ and C# where applicable., • Document test results and provide feedback to improve product quality., • Participate in design reviews and provide input on testability of new designs., • Bachelor's degree in Electrical Engineering, Computer Science, or related field., • 5+ years of experience in test engineering for software and hardware., • Strong proficiency in C++ and experience with test equipment., • Familiarity with RF technologies and testing methodologies., • Experience with electronic components, PCB design, and OEM products., • Knowledge of test design principles and methodologies., • Medical, • Dental, • Vision, • 401k, • PTO, • Bonus potential, • Profit sharing potential - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 12/19/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Require experience in IT, Fullstack, Software, or Systems Engineering with engineering teams. Project Engineer (Scrum Master). Job function: Engineering and Information Technology.

Job Description Role: Software Engineer Type: Full-Time Location: Orlando, FL – Hybrid Reports to: Software Engineering Manager Travel Estimation: Low- 5-10% WHO WE ARE.. 4C North America Inc. is one of the leading companies in Collective Training Management in the Defense Industry. We are proud of being a growing part of the Orlando Defense and Space contractor community and currently growing our Orlando hub. 4C North America Inc. is located in Orlando, in the heart of the Central Florida Research Park, right next to the University of Central Florida. We are hiring a talented Software Engineer professional to join our team. If you're excited to be part of a winning team, 4C is a great place to grow your career. We offer a fun, collaborative, fast-paced workplace with lots of challenges in an international environment working closely with our teams in the United States, United Kingdom, Australia, and Sweden. WHAT YOU’LL DO… Our Software Engineer will have a critical role in the success of the company as the business relies heavily on the software for many functions. Software Engineers are pivotal in the development of software that proves real solutions to our clients around the world. Learn a bit more about working with us here: Our Software Engineer will be responsible for: • Designing and developing computer software systems for various industries including military, industrial, and commercial sectors., • Troubleshooting software issues and debugging the codebase., • Creating flowcharts and other documentation to identify requirements for software and to propose possible solutions., • Applying computer science, engineering, and mathematical analysis to the software development process., • Developing and maintaining code in an agile environment., • Participating in improvements for processes and procedures internally to progress and standardize software solutions., • Conducting peer code reviews., • Taking on challenging tasks as needed with an eagerness to develop code and skills in new areas., • Bachelor’s degree in computer science or related field., • Must be able to obtain an active secret clearance., • Must be a U.S. Citizen with ability to travel internationally to work with our clients and teams., • Broad knowledge of core Computer Science/Software Engineering concepts, • 3-5 Years of experience building, deploying, and supporting Angular/Java applications, • Experience with Angular and web technologies like HTML5, CSS3/SASS/LESS, ES6+, RxJS, NgRx, • Experience with Java/Jakarta EE technologies such as Servlet API, JPA, JMS, JAX-RS, JAX-WS, WebSocket API, Spring Framework, Servlet Containers (Tomcat/Jetty), • Familiarity of CI/CD practices, tools and technologies like GitLab CI, Git, JUnit, Playwright, Docker, • Understanding of distributed computing technologies like REST, SOAP, OpenAPI, gRPC, Protobuf, • Strong communication skills, analytical and problem-solving skills., • Willingness to take on new challenges and the never-give-up attitude, • Solution-oriented mindset with the ability to thrive in challenging situations:, • Knowledge of artificial intelligence (AI) and machine learning (ML)., • Knowledge of event driven and message-based applications and technologies like AMQP, Kafka, JMS, • 3 weeks of Paid Time Off, • Sick leave, • Office Snacks & Fika, • On-site Gym, • Matching 401K, • Medical insurance plan, • Vision & Dental insurance plan, • Life insurance