Vertical jobs in Norfolk, VirginiaCreate job alerts

Job Description Structural Aluminum Fabricator/Welder Candidate must be reliable, self-motivated, detail oriented, able to deliver jobs within expected time frame. They MUST have EXPERIENCE AT LEAST 5YRS in the structural steel industry and 2 YEARS in the Aluminum Fabrication Industry. This is a full-time position with competitive pay, based on experience, and immediate work within our shop in Portsmouth, Va. Must be able to demonstrate ability to perform multi-pass, all position fillet and butt weld using SMAW (Shielded Metal Arc Welding), GMAW (Gas Metal Arc Welding) and FCAW (Flux Cored Arc Welding). Comprehend blueprints, sketches, and templates. Complete lay outs using drawings and/or templates and/or by picking up and developing the geometry required. Weld together metal components of products, as specified by layout, blueprints, diagram, work order, welding producers, or oral instructions, using electric arc-welding equipment. Prepare all material surfaces to be welded, ensuring that there is no loose or think scale, slag, rust, moisture, grease, or other foreign matter. Weld completion in flat, horizontal, vertical, or overhead positions. Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, shielded metal arc. Clean or degrease weld joint or work piece, using wire brush, portable grinder, or chemical bath. May repair broken or cracked parts and fill holes. Set up and operate welding equipment and select proper electrodes according to metals to be joined or as instructed. Preform grinding and joint preparation for NDT processes. Mark or tag material with proper job number, piece marks, and other identifying marks as required. Must be capable of using oxy/fuel torch to cut steel. Proficient in adding and subtracting of measurements. Positive attitude, superb attendance record and an eagerness to learn. Be Dependable. Self-starter that displays a strong work ethic and a commitment to quality workmanship. Willing to work in a team based fast paced environment. Work independently to complete responsibilities as required Job Type: Full-time Compensation: $42,250.00 to $56,000.00 /year based on a 40 hour-work week and average workweek for 2023 is 45 hours. 401k with Company Matching, Health Care, Paid Time Off and vacation. Experience: • Structural Steel – 5 years, • Aluminum Fabrication - 2 years Hampton Roads, Virginia Required work authorization: United States Company DescriptionMARRICK is a small fab shop that specializes in one/off projects for our customers.MARRICK is a small fab shop that specializes in one/off projects for our customers.

Job Description We are hiring experienced Pipefitters and Pipe Welders for shipyard projects in Hampton Roads, Virginia. These positions involve installing, fabricating, repairing, and welding piping systems aboard Navy and commercial vessels. Candidates should have prior shipyard or heavy industrial experience, strong trade knowledge, and a commitment to safety and quality. Responsibilities Pipefitters • Read and interpret blueprints, drawings, and schematics for piping systems., • Measure, cut, thread, bend, and fit pipe using hand and power tools., • Install, align, and secure piping systems aboard vessels., • Test piping systems for leaks and functionality., • Work with various metals including steel, copper, and stainless. Pipe Welders • Perform welding on pipe systems using SMAW, TIG, and/or MIG methods., • Weld in various positions (flat, vertical, overhead) and in confined shipboard spaces., • Ensure welds meet Navy and shipyard specifications, with strong attention to quality., • Conduct inspections and repair welds as needed., • Work safely with cutting torches, grinders, and other welding tools. Qualifications • Prior shipyard, Navy, or heavy industrial pipefitting/welding experience (preferred)., • Ability to read blueprints, drawings, and technical instructions., • Proficiency in welding processes (SMAW, GTAW/TIG, FCAW)., • Knowledge of pipe system installation and testing standards., • Ability to work in confined spaces, at heights, and in varying conditions., • Must pass drug screening and background check. Preferred / Plus Qualifications • DBIDS (Defense Biometric Identification System) card., • Current welding certifications (e.g., ABS, NAVSEA, ASME)., • OSHA-10/30, fire watch, or related safety certifications., • Experience on Navy ship repair or new construction projects.Company DescriptionSince 1992, Tidewater Staffing, Inc. (TSI) has been providing unrivaled workforce solutions for our clients in the ship repair, warehousing, and light industrial/manufacturing industries. Through the years, we’ve dedicated ourselves to solving staffing challenges efficiently, economically, and with integrity by embodying our mission statement: “Put people to work. Do the right thing every day.”Since 1992, Tidewater Staffing, Inc. (TSI) has been providing unrivaled workforce solutions for our clients in the ship repair, warehousing, and light industrial/manufacturing industries. Through the years, we’ve dedicated ourselves to solving staffing challenges efficiently, economically, and with integrity by embodying our mission statement: “Put people to work. Do the right thing every day.”

Job Description Hutco, Inc. Position: Inside Machinist (Large Machine Operator) Location: Newport News, VA Branch: Portsmouth Pay Rate: $37.50 And $120.00 per-diem for those who qualify Position Overview Hutco is seeking experienced Inside Machinists (Large Machine Operators) that have worked in a high mix low volume type of environment where complex setups on large CNC machines are accomplished. This position involves Machining large parts such as weldments, and castings where the material is inconsistent in size and shape and decision making on the machinists’ part is required with a strong background in blueprint reading/interpretation and geometric dimensioning and tolerancing. The perfect candidate would be one with a minimum 4 year apprenticeship in the trade or comparable technical school training, who learned the trade on manual machines in a job shop environment, and transitioned to enclosed CNC equipment, before becoming a large CNC horizontal boring mill operator 5” diameter spindle or larger, large CNC lathe operator machining parts in excess of 30” in diameter and 20’ in length, and large CNC vertical turning center operator with tables of 6’ in diameter or larger. Key Responsibilities • Operate Horizontal Boring Mills and Vertical Milling Machines, including Bridge/Gantry type mills with multiple head attachments., • Perform multi-axis machining, ideally with experience in 3+2 or 5-axis machining., • Execute threading, drilling, and tapping processes with a high degree of accuracy., • Comprehend and interpret complex mechanical drawings and blueprints., • Perform precision measurements using instruments such as micrometers, verniers, and depth gauges., • Ensure proper tooling offsets and data inputs using controllers like Fanuc, Siemens, Acramatic, and Cincinnati-Milacron., • Experience: Minimum of 5 years as an Inside-Shop Machinist., • Technical Skills: Proficient with NC processes, Manual Data Input, Tooling Offsets, and operation of manual/NC machines., • Machinery Proficiency: Experienced in working with large parts (up to 30 feet in length) and various metals., • Certifications: Completion of a Machinist or Tool & Die Apprenticeship is highly preferred., • Safety Training: Compliance with OSHA standards, including confined space training, PPE training, and audiometric testing. Special Requirements • Experience with Large Machinery: Extensive experience on Horizontal Boring Mills and Vertical Milling Machines., • Multi-Axis Machining Background: Familiarity with 3+2 or 5-axis machining is preferred. A limited benefit plan is available to Hutco Inc. employees through Essential Staff Care. The hotel is advanced for the first two weeks (loan). Available plans include: • Medical/Prescription, • Dental Coverage, • Vision Coverage, • Short Term Disability, • Term Life Benefits, • Accidental Death & Dismemberment Benefit How to Apply CONTACT HUTCO TODAY! Apply online or visit the Portsmouth Branch: Address: 728 High Street Suite 200 Portsmouth, VA 23704 Send resumes to or call us at (757) 223-7680. Hutco, Inc. is an Equal Opportunity Employer (EOE). #HUTCOSP

Job Description Position Description/Summary: Assigned to provide functional guidance and direction in Facilities Operations & Management. Provides technical guidance and administrative direction to multiple sites and buildings. The successful candidate must have strong organizational and teamwork skills, proven problem-solving abilities, and the desire to innovate designs as well as the work processes. Will also be responsible for the review of project plans and specifications for constructability, conformance to regulatory agency requirements and productivity improvement. Provides consultation and guidance to large and complex project work areas as required. Performs duties with a high degree of latitude, exercising independent judgment and reason. Duties: • Oversee the O&M support provided to all Business Line (BL) contracts and continuous operation of all building systems, inclusive of critical infrastructure, • Provides functional guidance and technical direction, • Manage and ensure industry compliance requirements for all aspects of MEP, FLS, VTE and OSHA through direct engagement with Program and Project Managers, • Supervisory and management support to Program/Project Managers, engineers and maintenance staff, • Create and routinely update a documented plan that includes preventive, predictive and reactive maintenance procedures, • Develop and implement SOP’s, MOP’s and other processes as appropriate across all BL contracts, • Participate regularly in client-facing and contract team communications virtually and in-person, • Lead, create and manage O&M budget and participate in overall operating budget process at both corporate and contract levels, • Oversight of both management and performance evaluation for contractors/vendors; monitor and document performance in partnership with QC team, • Ensure timely and effective response to emergencies and service calls across the BL, • Coordinate directly with corporate Safety and Occupational Health Manager regularly, • Lead and organize ongoing technical, safety, and operational process training programs and procedures, • Participate in business development growth opportunities to include solicitation review, RFP support, proposal input, site walks and pricing submissions, • Review essential contractual documents such as Scope of Work, Request for Proposal (RFP) and Information Report, • Ultimately responsible for proper operation of all mechanical, electrical, plumbing and associated control systems across the BL at optimal specified performance levels, • Support and oversee large, complex facilities and maintenance projects, • Contributes to the organization through strategy definition and implementation of directed initiatives, • Ensure that appropriate levels of clear and timely communication are occurring with customers at the contract level, • Ensures contracts are maintained and services are scheduled as needed to maintain continuity of operations, • Works with building occupants and safety personnel to understand the critical needs and risk of losses associated with operations performed in each area of the building and develop plans to mitigate risks, • Tracks corrective actions and follows up with client and contract team until issue(s) are satisfactorily resolved, • Ensures contact procedures are in place for unscheduled system interruptions, equipment malfunctions, or emergency response is required, and updated regularly, • Provides technical assistance during emergency response incidents as necessary, • Develops common guidelines and procedures for effective quality assurance/quality control (QA/QC) programs, • Monitors execution methodology on projects to learn from improvements and to promote continuous improvement, • Support the creation of a work environment that fosters openness, trust, communication, teamwork, empowerment, innovation, and job satisfaction, • Minimum 10 years of progressive related experience in Infrastructure Operations and Management, • Vocational or technical training in related MEP field, • Professional licensing in aligned trade areas, • Substantial experience in the maintenance and operation of a highly technical facility such as hospital, research facility, data center or similar, • Significant experience in managing multiple projects and tasks simultaneously, • Supervisory experience, demonstrated experience planning, scheduling, and supervising complex maintenance projects, • A well-rounded background in all the building trades, • Demonstrated knowledge of Direct Digital Control (DDC) systems, • Skill in problem solving and critical thinking associated with HVAC, Electricity, Plumbing and other building maintenance, • Demonstrated skill in leadership, • Demonstrated oral and written communication skills, • Must have excellent interpersonal skills and ability to engage with a diverse group of people and effectively share knowledge, • Demonstrated computer skills including Microsoft word, Excel, software for building equipment and control systems, familiarity with programmable logic controllers, basic computer hardware troubleshooting skills, • Ability to coordinate a large building and/or grounds program, • Ability to effectively read and interpret blueprints, construction plans and written specifications, • Ability to estimate building costs and project timelines, • Broad knowledge of all phases of engineering, field activities, production techniques, building materials, and construction methods for development of various work areas, • Understands technical issues and cost related to selection of design features and unique requirements, • Broad knowledge of building industry, government compliance & regulatory standards and environmental compliance laws and requirements, • Has experience with engineering work planning, scheduling and cost estimating, • Experienced with managing knowledge of sustainability and its integration into the design and the construction of various buildings, • Ability to solve problems by thinking laterally and be able to understand the needs and requirements of the client and various entities – to provide planning / design / feasibility solutions in a multi -disciplinary / multi - sectional context, • Must be self-driven and able to plan and execute work without direct supervision from senior management and/or peers, • Federal contracting experience in managing O&M contracts, • CFM or PMP certification, • Professional Journeyman/Master License in the MEP trades, • NICET or NATE certified, • BAS/BMS operations and management, • Fire Life Safety, Fire Alarm and Fire Suppression management, • Vertical Transportation Equipment (VTE) management, • CFC Universal or equivalent, • Backflow Prevention certified, • Gas Installations, • Water Treatment for all systems (potable and non-potable), • Groundwater/Rainwater Reclamation systems, • Roof Anchorage systems and compliance, • Emergency Power (Generators and UPS systems), • Instructor level experience in any of the MEP trades

Job Description This position is responsible for fire prevention and fire protection at the assigned work site. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Comprehend basic instructions and general correspondence., 2. Be able to clearly communicate verbally to warn others of fire or other danger., 3. Understand the hazards associated with fixed and portable fire protection systems and the manner in which the systems are activated., 4. Understanding of proper use and care of fixed and portable fire protection systems., 5. Understand the Shipyard Competent Person Report, and where to find it., 6. Know the types of fire, the materials involved, and the type of fire extinguisher needed to suppress the fire., 7. Possess a Fire Watch training card., 8. Be able to wear clothing appropriate for the task. No exposed jewelry shall be worn while working. Finger nails shall be short. Long hair shall be worn in pony tail or wrapped for protection and should not interfere with hard hat. Ability to wear PPE, especially respirators. DUTIES AND RESPONSIBILITIES, 9. Have Fire Watch Training card with them at all times in the shipyard., 10. Carry out Fire Watch procedures to protect personnel and customer and BAE property from fire damage., 11. Ensure that designated hot work area is clean and free of combustible materials before hot work commences., 12. Keep your work area clean and safe at all times, especially at the end of the shift., 13. Warn other personnel of danger, or to evacuate, by verbal or other prearranged method of communication., 14. Show initiative and ownership of work and work area., 15. Adhere to all safety rules and good work ethics. Be accountable for completion of work assignments., 16. Arrive at the designated work site at the assigned time. End the shift as directed by the schedule and your supervisor or journeyman., 17. Work shifts and overtime as assigned the supervisor., 18. Comply with OSHA standards and BAE best safety practices. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS INCLUDE: (May be required to demonstrate any or all requirements.) 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 - 30 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head). 6. Good balance while working on uneven surfaces and maneuvering obstacles., 6. Sufficient handgrip and coordination to carry and operate tools and equipment., 7. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 8. Respond to visual, verbal, and audible sounds/commands., 9. Work at heights above 12’ from ladders, scaffolding, and manlifts., 10. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 11. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 12. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. “LEAD is proud to be an Equal Opportunity and Affirmative Action Employer. LEAD is committed to providing an environment of mutual respect where employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, and any other characteristic protected by applicable law. We believe that diversity and inclusion among our teammates is critical to our success as a growing national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool.” Company Description“At LEAD, your career is our top priority. As a leading recruiting partner, we're dedicated to connecting talented job seekers with exciting opportunities and rewarding careers across a variety of dynamic industries. Our team takes the time to understand our employee's unique skills, experience, and professional goals. We then leverage our extensive network and industry expertise to match them with the perfect fit - whether that's a short-term project, long-term contract, or a permanent role. Employee's don't just settle for just any job - they partner with LEAD and unlock a world of rewarding possibilities for themselves. Apply today and let us help you find the perfect fit.”“At LEAD, your career is our top priority. As a leading recruiting partner, we're dedicated to connecting talented job seekers with exciting opportunities and rewarding careers across a variety of dynamic industries. Our team takes the time to understand our employee's unique skills, experience, and professional goals. We then leverage our extensive network and industry expertise to match them with the perfect fit - whether that's a short-term project, long-term contract, or a permanent role. Employee's don't just settle for just any job - they partner with LEAD and unlock a world of rewarding possibilities for themselves. Apply today and let us help you find the perfect fit.”

Job Description Insight Global is hiring for a second shift CNC Machinist for our client in Chesapeake, VA. This candidate must have at least 3 years of experience operating vertical and horizontal lathes using steel and aluminum material, loading programs into the machine control panel, be able to read and interpret blueprints, and perform minor machine maintenance as needed. The hours for this position are 4 pm EST to 2:30 am EST, Monday through Thursday, with optional OT on Fridays and Saturdays.

Job DescriptionNow Hiring: Machinist (Manual or CNC) Job Description As a machinist, you will be responsible for operating and setting up a variety of machine tools to produce high-precision metal or plastic parts. Your role will involve reading and interpreting technical drawings, selecting and installing the correct tools, measuring and inspecting parts, and performing routine machine maintenance. Responsibilities • Operate and set up a variety of machine tools, including lathes, mills, grinders, and drills., • Read and interpret blueprints and technical drawings to understand part specifications., • Select and install appropriate cutting tools and determine correct speeds and feeds., • Use precision measuring instruments to ensure parts meet required dimensions and tolerances., • Perform routine maintenance and cleaning of machines, reporting any mechanical issues., • Inspect finished parts to ensure they meet quality standards., • Modify and adjust machine settings for optimal performance., • Identify and resolve machining issues such as incorrect dimensions and tool wear., • Adhere to safety protocols and maintain a clean and organized work area., • Experience with CNC, lathe, and mill operations., • Proficiency in troubleshooting and machine setup., • Ability to read and interpret blueprints., • Familiarity with Fanuc control, Haas, Hwacheon, and g-code/m-code., • Great attitude and willingness to learn., • Experience with horizontal and vertical mill machines., • Knowledge of conventional/manual machining. Join a growing company with two years of steady work and more to come. As one of only two companies in the country that makes submarine hatch doors, you will have the opportunity to learn many different types of machines. Optional overtime is available, allowing you to work 50+ hours if desired. Work Environment Work in a machine shop environment that is hot in the summer and cold in the winter, with plans to install AC units. The building is older and crowded, providing a unique and challenging work setting. Job Type & Location This is a Contract to Hire position based out of Hampton, Virginia. Pay and Benefits The pay range for this position is $30.00 - $40.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Chesapeake,VA. Application Deadline This position is anticipated to close on Oct 24, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Electric Motor & Contracting Company, Inc., founded in 1960, is one of the largest independently owned repair facilities for electrical rotating machinery, pumps, and switchgear in the United States. We are conveniently located in Hampton Roads, Virginia just miles from Virginia Beach and Norfolk. Our company prides itself on: • Maintaining a clean, state of the art facility, • Providing quality service to our customers, • Employing and retaining great people Job Description: • Disassembly and reassembly of vertical motors up to 12,000 HP (13.2kw Voltage)., • Work with and around radioactive materials (using proper PPE)., • Troubleshoot oil leaks, vibration problems, etc., • Perform incoming and outgoing test runs on motors., • High school degree or equivalent., • Must be able to successfully complete and maintain Radiological Worker Training annually (cost covered by employer)., • Minimum 5 years of hands-on experience disassembling, troubleshooting, and reassembling motors and/or pumps., • Ability to read drawings and interpret specifications., • Must be willing to work overtime as needed (nights/weekends)., • Ability to lift 50 pounds., • Must possess excellent verbal and written communication skills., • Must know how to identify and use basic hand tools., • Must know how to use M&TE to include dial indicators, micrometers, calipers, torque wrenches, pressure gauges, etc., • Some basic electrical skills and knowledge preferred, however not required., • Must know how to safely operate a forklift., • Must be familiar with the use of an overhead crane and basic rigging. Our company offers competitive pay and a benefit package including vacation/holiday pay, insurance, retirement, paid uniforms, relocation assistance, and much more. Company DescriptionEMC's greatest asset is our skilled people. These employees are skilled in rebuilding and re-manufacturing rotating electrical & mechanical equipment. We have approximately 270 full time employees on the payroll, their areas of expertise are: motor winders, motor mechanics, machinists, engineers (electrical and mechanical), quality assurance technicians, switchgear technicians, field service technicians (switchgear, vibration analysis, infrared scanning, laser alignment, troubleshooting and repair of marine and industrial systems), administrative, sales and management personnel.EMC's greatest asset is our skilled people. These employees are skilled in rebuilding and re-manufacturing rotating electrical & mechanical equipment. We have approximately 270 full time employees on the payroll, their areas of expertise are: motor winders, motor mechanics, machinists, engineers (electrical and mechanical), quality assurance technicians, switchgear technicians, field service technicians (switchgear, vibration analysis, infrared scanning, laser alignment, troubleshooting and repair of marine and industrial systems), administrative, sales and management personnel.

Job Description Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is an industry leader, providing engineering and industrial services to the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other DoD organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to learn, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. Our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we're looking for 'the best at what they do' to join our team and help us grow. *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Veteran and retired candidates welcome! Job Description: We are seeking a highly skilled and experienced Welder III to join our team in Norfolk, VA. This position is responsible for performing complex welding tasks in support of ship repair and maritime fabrication projects. The ideal candidate will have a strong background in structural and pipe welding, a deep understanding of shipbuilding materials and techniques, and experience working in a shipyard or maritime industrial environment. The successful candidate will join our Fleet Services Group, performing various ship repair, modernization, and Alteration Installation Team (AIT) projects in support of U.S. Navy and commercial maritime clients. This role requires precision, efficiency, and a commitment to quality workmanship in both shop and shipboard environments. Essential duties & responsibilities include, but are not limited to the following: • Join, fabricate, and repair metal and other weldable material by applying appropriate welding techniques., • Perform various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems., • Fabricate and install fixtures and jigs required for welding process alignments., • Interpret blueprints, specifications, diagrams or schematics to determine appropriate welding process., • Select required welding filler materials, joint design, heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD., • Inspect completed welds to determine structural soundness and adherence to NAVSEA, ABS & AWS standards., • Install or repairs equipment, such as pipes, valves, floors and tank linings., • Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding., • Operate manual or semi-automatic welding equipment to fuse basic metal segments, using processes such as flux-cored arc, carbon arc, etc., • Weld multiple types, thicknesses & sizes of pipe, plate & bar material in horizontal, overhead and/or vertical positions., • Document objective quality evidence to the requisite Continental Tide Forms., • Demonstrate the ability to estimate a drawing package / installation., • Utilize the following: SMAW, GMAW & GTAW, Ship Fitting and OXY ACC & Propane GAS Cutting torch. Requirements: • Must possess a high school, trade or vocational school degree., • Target of 10 years plus of direct experience in ship repair and installation of HM&E systems and equipment., • Ability to read and interpret ship installation drawings, installation specifications and NAVSEA Standard Items is preferred., • Must have or have the ability to obtain a SECRET clearance., • Must have the ability to obtain base access and security credentials., • Travel may be required within and outside of the continental United States., • Due to export control regulations, this role is open to U.S. citizens only., • Possess basic and some advanced specialized welder's tools., • Exposure to open-air environments, including noisy, hot, and cold conditions., • Required to visit project sites aboard ships and rigs, both onshore and offshore., • Must wear various types of personal protective equipment (PPE), such as hearing, eye, head, and hand protection, as required., • Site visits may involve standing on a variety of surfaces and angles, bending, crouching, and climbing over obstructions such as scaffolding, ladders, and internal barge or boat structural components., • Exposure to sound levels exceeding 100 decibels., • Must possess sufficient visual acuity, peripheral vision, depth perception, and night vision to inspect marine components and systems, identify defects or irregularities, and safely operate tools and equipment., • May work in confined spaces with limited ventilation., • Requires prolonged periods of sedentary work, including sitting and/or standing., • May be required to operate machinery, power tools, and/or heavy equipment., • Must be able to communicate effectively to exchange and comprehend information., • Frequent exposure to extreme weather conditions, including high heat and extreme cold., • Must be able to lift and carry 30 lbs. or more, depending on the task requirements. Benefits: Continental Tide offers an empowering professional environment in a culture that emphasizes teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Continental Tide is an Equal Opportunity Employer and participates in E-Verify and U.S. citizenship is required for most positions. Continental Tide prohibits discrimination against any protected class from discrimination on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. These protections extend to all management practices and decisions, including recruitment and hiring, appraisal systems, promotions, training, and career development programs. Consistent with these obligations, Continental Tide also provides reasonable accommodations to employees and applicants with disabilities; known limitations related to pregnancy, childbirth, or related medical conditions; and for sincerely held religious beliefs, observances, and practices. Reasonable Accommodations Statement: To perform this job successfully, an individual must perform the essential job duties satisfactorily with or without reasonable accommodation and without posing a direct threat to the safety or health of employee or others. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Apply Today: If you’re ready to make a difference, we encourage you to apply and become a part of our mission to deliver quality solutions to the Fleet. To be considered you must apply by going to See all of our latest opportunities at or follow us on our LinkedIn page at . “This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans.”

Job DescriptionSalary: Based on experience Summary: Analyze blueprints, specifications, proposals, and other documentation to prepare time, cost, and labor estimates for U.S. Navy, U.S. Coast Guard, MSC, and commercial vessels. Duties and Responsibilities: Coordinate, develop, compile, and submit detailed information required to provide a complete and comprehensive estimate of all labor, material, and subcontractor costs associated with a project. Review and evaluate bid specifications, vessel drawings (blueprints). Competitive pricing of materials. Review and analyze Subcontractor and Vendor quotes to assure quoted price, scope and terms comply with schedule and specifications. Communicate with Production, Purchasing and vendors to determine, discuss and verify costs. Reviews customer information and develops labor, material, and subcontractor price estimates for required work. Develops project summary of itemized prices. Prepares estimates for change orders. Develops craft labor budgets used for planning and scheduling of the work. Analyzes subcontractor quotes to determine the best alternative. Also compares subcontractor and in-house quotes to formulate make-or-buy decisions. Works with production management to formulate build strategies for intended repairs or construction. Develops work packages for distribution to production. Identifies and schedules key and critical path work items. Uses history to establish and document standard costs; develops costs for new work where standards and history do not exist. Identifies and resolves ambiguities or inconsistencies in specifications or bid packages that could affect cost, prior to contract finalization. Applies knowledge of cost and pricing to produce final bid for management review. Must regularly lift and/or move up to 50 pounds and seek assistance with weights over 50 pounds. Perform all other duties as assigned. Occasionally perform other physical activities as required, such as: o Stooping, Bending, Squatting Climbing (including but not limited to, vertical and incline ladders, masts, and king posts) Crawling (including but not limited to, through scuttles, manhole covers, tanks, and voids) Experience Requirements: Minimum 3 5 years of shipyard estimating experience. Familiar with Navy NAVSEA standard items and other regulatory body standards and requirements. Deck plate management of ship repair on various types of Navy and commercial vessels a plus. Familiar with estimating Habitability Projects a plus Other Requirements: Physically able to conduct detailed ship checks onboard vessels. Excellent interpersonal and communication skills, both oral and written. Must be proficient in working with MS Excel, MS Word and MS Outlook. Knowledge of MS Project a plus. Must be able to obtain a government security facility pass. This position requires access to U.S. government or military sites. As such, candidates must be eligible to obtain base access clearance, which includes passing a background check and presenting valid government-issued identification. Per federal requirements, acceptable ID must be REAL ID-compliant or an approved form of federal identification, such as a valid U.S. passport. Pay will be based on experience. This job description does not include all activities, duties or responsibilities required for this position. The key duties, responsibilities and requirements identified in this description are subject to modification by company at any time.

Job Description NSC Staffing is currently hiring for Structural Welders for work in Norfolk, VA. Requirements: Must pass stick & flux core weld test Structural Welder Qualifications: • Must be able to demonstrate ability to perform multi-pass, all position fillet and butt welds using SMAW (Shielded Metal Arc Welding), GMAW (Gas Metal Arc Welding)< and FCAW (Flux Cored Arc Welding), • Knowledge of welding techniques (oxygen-acetylene, electric arc, and TIG), tools and equipment, • Technical training preferred, • Knowledge of and ability to use hand tools and instruments associated with the trade, • Must be able to work effectively with others, • Comprehend blueprints, sketches, and templates, • Enter and move through manholes to reach and work in internally confined spaces, • Must be a steady, reliable worker, • Weld together metal components of products, as specified by layout, blueprints, diagram, work order, welding producers, or oral instructions, using electric arc-welding equipment, • Prepare all material surfaces to be welded, ensuring that there is no loose or think scale, slag, rust, moisture, grease, or other foreign matter, • Weld completion in flat, horizontal, vertical, or overhead positions, • Operate manual or semi-automatic welding equipment o fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding, • Manually apply filler rod to supply weld metal, • Clean or degrease weld joint or work piece, using wire brush, portable grinder, or chemical bath. May repair broken or cracked parts and fill holes, • Set up and operate welding equipment and select proper electrodes according to metals to be joined or as instructed, • Preform grinding and joint preparation for NDT processes, • Burning, washing, edge prepping using hand and automated equipment, • Flux cored inner shield and dual shield welding along with oxy-acetylene torching, air-arc, weld-wire gas, stick and pipe flange, • Construct or repair metal products by joining parts either manual (using a variety of welding methods including electric arc, MIG and TIG welding or oxy-acetylene welding) or by machine, • Read and understand the Chemist and Competent Persons reports and determine if job sites, particularly those involving combustible material, are safe for personnel and hot work, • Preforms grinding and joint preparation for NDT processes, • Mark or tag material with proper job number, piece marks, and other identifying marks as required, • Will be required to wear personal protective equipment – hard hat, safety glasses, steel toe boots/shoes and, when necessary, respirator, • Other duties as assigned, • Understand and act upon instructions

Job Description Who Are We? UniUni, a North American leader in last-mile logistics, delivers tens of millions of parcels annually in Canada, from Coast to Coast, and is rapidly expanding across the United States. Founded in 2019, UniUni’s tech-driven innovation and crowdsourcing delivery model offers fast, economical, and reliable services to local, national, and international e-commerce clients. What Do We Offer? At UniUni, we offer exciting opportunities to our employees to achieve their career goals. We value lateral moves as much as vertical promotions – we believe all roles should develop your skills, broaden your experience, and help you build a rewarding career. We know you are not only seeking a job, but a career to pursue. If you are ready to join UniUni’s dynamic team, while working hard and having fun doing it, we invite you to apply online and let us know how you can be part of our success story Requirements Responsibilities l Assist in receiving, dispatching, inspecting, handling and stocking inbound products； l Receives returns, counts and confirms quantities, determines condition and completes paperwork; l Arranges for pick-up of shipments, contacts delivery drivers and coordinates schedules; l Communicates effectively with the other departments in the company； l Responds quickly to customer/client inquiries, resolves problems, and communicates service issues to supervisor; l Encourages safe work practices in others； l Arranges daily cycle count and follow variance; l Weekly report updates; l Other duties as assigned to the position Qualifications l Bachelor or international equivalent; l 1 years of relevant experience preferred, no experiences is ok, everything will be trained； l Moderate computer skills, assist in report data collection. l Strong responsibility, follow supervision, good communication skills Morning shift 6:30AM-3:30PM Benefits Benefits: 401K, Dental, Vision, Medical insurance, Paid Holiday, Paid Time Off, Paid Sick Leave, Management training program, H1B Sponsorship. $18-22/hour during first three monthes, will increase after probationary period.

Job DescriptionSalary: $85K - $110K Ready to Take the Next Step in Your Career to Project Management? Curtin Maritime offers hands-on field training designed to equip you with the leadership, management, and problem-solving skills essential for success. Our comprehensive training and coaching programs are tailored to develop exceptional project managers who lead with confidence and competence. Efficiency. Innovation. Integrity. These are our 3 Pillars. At Curtin Maritime, these core values are the framework for safe performance and operational excellence; proof of these pillars is evident in our people and our fleet. For 25 years, Curtin Maritime has been an industry leader in quality maritime solutions. We are a dynamic Marine Construction and Marine Transportation company experiencing rapid growth. Our team provides customers with a complete suite of maritime solutions, allowing us the incredible opportunity to work on unique projects in some of the most amazing places on earth. THIS ROLE: The Project Engineer is the leader responsible for all aspects of production & survey within our dredging projects including providing technical/operational expertise to the operations team. This includes the oversight of all surveys to both the operations team and the admin team. In addition, the Project Engineer administers project survey requirements from completion to final approval. The Project Engineer directs all dig strategy with the dredge management team. The Project Engineer is also responsible assisting the Project Manager in establishing, maintaining and performing all duties required to provide administrative support for dredging project jobsites. This role follows a 2 week on / 2 week off rotational schedule. This role will require travel to different projects sites and our corporate HQ/shipyard in Long Beach, CA WHAT YOULL DO: • Manage all survey assets, • Develop dig strategy with project management, • Analyze survey data to advise/plan daily dredge plan, • Responsible for all technical/operational aspects of survey in the assigned project within the guidelines set by the Project Manager and customer, • Generate daily survey related deliverables and discuss survey results with Project Manager and crew, • Perform survey related calculations, • Define, generate, and review project requirements documentation within defined scope, • Develop work plans and hazard analysis to ensure safety and efficiency, • Resolve of engineering, material and planning issues, • Ensure implementation of improved engineering processes, • Work with purchasing department on vessel specific purchases needed which includes sourcing from appropriate vendors and arranging the shipment, • Track, analyze and generate reports of project progress and productivity, • Ensure compliance with all relevant regulatory agencies, • Calibrate, troubleshoot & maintain survey and vessel positioning systems WHO YOU ARE: Certifications and Other Requirements • Bachelor's degree in Engineering (any discipline) or Construction Management preferred., • 1+ years dredging experience as a Project Engineer or similar role, • USACE Construction Quality Management for Contractors (CQM-C) Certification, • RMS competency and ability to update daily reports for clients, • OSHA 30, • Primavera P6 Certification, • Develop SOPs for survey and engineering team, • Understanding of pump dynamics, velocities, pipeline routes, and booster placements., • Draft and update project schedules in conjunction with Quality Control Manager, • Generates volumes for pay applications, • Provides survey updates for client meetings and can act as lead for client meetings in absence of PM or QCM, • Proficient in setting up survey equipment such as GPS positioning on tugs and dredge, base stations, and tide gauges with no assistance., • Able to calibrate a survey boat by manipulating settings, verifying equipment communication, perform bar checks, etc., • Ability to interpret project plans and specs to produce survey deliverables with minimal assistance., • Develops and maintains master volume sheets for projects recording dig/pay, volume remaining, shoaling, slopes, etc., • Plans out and coordinates all acceptance, progress, and third-party surveys., • Competent in drafting contract RFIs, • Assists in scheduling & staffing of field engineers, • Ability to fill in as Project Manager as needed, • Handles auxiliary management duties when needed such as client interface, fueling appointments, delay troubleshooting, and subcontractor management., • Document and produce data/write ups for change orders, differing site conditions, REAs, etc., • Generates and submits pay applications in conjunction with Quality Control Manager, • Set up and deploy new dredging and survey equipment, • Analyze geotechnical data, • Develop production estimates for bids, • Acts as a leader and mentor to other Project Engineers & Field Engineers, providing training and coaching on engineering and survey duties, • Computer literate and proficient in Microsoft Office desktop programs, especially MS Excel, • Skilled with AutoCAD, Hypack and/or other Survey software, • Ability to operate small marine vessels preferred, • Technical understanding of construction and maintenance of marine vessels, • Ability to read and understand technical manuals and drawings, ABS, USCG rules, • Valid Drivers License with clean driving record required, • Valid TWIC Aptitudes • Experience in identifying and anticipating design/production work sequence conflicts required., • Excellent written and oral communication skills required, • Demonstrated knowledge of scheduling, possess an ability to monitor progress to schedule and adhere to strict deadlines required, • Willingness and ability to spend time onboard the vessel going up and down staircases and vertical ladders required, • Strong negotiation skills both verbal and written, • Work outside as well as inside in an office environment., • Must meet fit for duty requirements upon job offer (pre-employment physical and drug test), • The employee must meet physical requirements including but not limited to, walking, stooping, kneeling, crouching, crawling, climbing up/down ladders and stairs, negotiating uneven and moving surfaces, • The employee must meet physical requirements including but not limited to, walking, stooping, kneeling, crouching, crawling, climbing up/down ladders and stairs, negotiating uneven and moving surfaces, • Must be comfortable entering tanks and other confined spaces, • Ability to lift up to 50 pounds unassisted Additional Requirements • Rotational 2 weeks on and 2 weeks off, • Willingness to travel to project sites or Long Beach yard as needed., • Ability to work on tight deadlines for project needs outside normal business hours. At Curtin Maritime, were committed not only to professional development but also to work-life balance. Our management team benefits from a consistent, even-time schedule, competitive salary, and a comprehensive benefits package. Join us and take the next step toward realizing your full potential. Apply today. What we offer: • Competitive Compensation, • Generous benefits package including:, • Medical, • Dental, • Vision, • Short-term Disability, • AD&D/Life Insurance, • 401k (with company match), • Additional option to elect incremental Life Insurance for employee and dependents, and choice to elect Health and/or Dependent Flexible Spending Account. Curtin Maritime is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Job DescriptionSynerfac is seeking a CNC Machinist for our client in Portsmouth, VA. For over 60 years, our client has tackled some of the most complex industrial machining and fabrication projects in the world. With a relentless focus on quality, cutting-edge technology, and a team of skilled professionals, they deliver exceptional solutions to customers across the globe. As a CNC Machinist, you'll be a key player in daily operations - setting up and operating manual machines with precision to fabricate, repair, and modify machine parts, tools, and equipment. Responsibilities and Functions: • Use precision tools, machinery, and equipment such as lathe, manual milling machine, drill press, hydraulic press, band saw, and a variety of cutting tools and equipment, • Fabricate and shape parts such as tools and machine parts out of metal, • Properly and safely select, align, secure, and remove holding fixtures, cutting tools, attachments, accessories, and materials onto machines, • Recognize, deploy, and properly use inserts, fixtures, and tooling, • Studies applicable drawings and prints of work to be performed and follows instructions, • Operates and utilizes lifting aids as necessary to perform work, • Perform daily, regular cleaning and light maintenance tasks on machinery and equipment, • Ability to track parts and jobs in JobBOSS and Travelers, • Work overtime as needed on evenings and/or weekends Required Qualifications: • 3 to 5 years of experience with Lathes, Grinders, Boring Mills, Planers, and Portable Tools, • Familiarity with Fanuc, Mazatrol, Okuma, DMG/Mori CNC controls, • Have experience with maintaining 0.001" tolerances, • Have a basic understanding of Geometric Dimensioning & Tolerancing (GDT), • Have experience in job setup on vertical and horizontal CNC machining centers and CNC turning centers, • Willing to work at both Portsmouth, VA locations as job needs require #ZRNV

Job DescriptionLabor One is hiring Journey-Level Specialty Welders (Alum, CuNi, Stainless; TIG) for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information This position is responsible for welding pipe of various metals on a ship or in a shop to support mechanical repairs and modernization of marine vessels including US Naval, Military Sealift Command, and commercial ships. The journeyman welder is also responsible for providing direction to assigned helpers. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information such as conditions found by writing condition reports that include recommended corrective action., 5. Must have a thorough knowledge of SMAW, FCAW, and GMAW theory., 6. Must be able to certify in P-3 joint with permanent backing ring, and P-14 socket weld joint:, 7. SMAW, 8. GTAW, 9. FCAW OR, 10. Silver Brazing, 11. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 12. Must possess a working knowledge of equipment and work processes used in marine pipe welding., 13. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 14. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 15. Must have four (4) years of pipe welding experience. DUTIES AND RESPONSIBILITIES 1. Provide direction to a pipe welding helper, if assigned, as needed to complete the assigned tasks., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor., 3. Work shifts and overtime as assigned., 4. Be accountable for completion of daily work assignments., 5. Comply with OSHA standards and the shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Confer with the supervisor to resolve unexpected events related to your assigned task. Carry out written or oral instructions. Work Tasks Include: a. Inspect and prepare the area for hot work, including gas free certifications and tag-outs, before commencing any hot work. b. Prepares work area for production welding by inspecting joints and cleaning as required. c. Inspect welds for defects. Confer with supervision before correcting deficiencies. d. Document existing conditions using Condition Found Reports. e. Ensure gas free certifications are accurate and up to date. f. Assist with Lock-out Tag-out for work being performed. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd shift only 40 hours a week / OT on approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Overview GSI is opening up a new line of business aimed at custom concrete projects. This role would be hired as one of our senior technician roles, but would be doing a combination of concrete sculpting and supporting our other core operations. You will be laborer working aside experienced technicians measuring, drilling, mixing concrete, and creating sustainable infrastructure. You will be able to point to your work at the end of the day and take pride in building a safer community. This is a career opportunity with significant advancement, partnered with your own personal effort and willingness to learn our business. Who is GeoStabilization International®? GeoStabilization International® (GSI) develops and installs innovative solutions that protect people and infrastructure from the dangers of geohazards. We specialize in emergency landslide repairs, rockfall mitigation, and grouting using cutting edge design/build and design/build/warranty contracting. GeoStabilization International is the leading geohazard mitigation and bridge rehabilitation firm operating throughout the United States, Canada, and Australia. Our expertise, proprietary tools, and worldwide partnerships allow us to repair virtually any slope stability or foundation problem in any geologic setting. Responsibilities • Sculpting vertical concrete walls made of shotcrete, • Varied surfaces like stacked stone, geologic, ashlar, • Read and determining measurements, • Maintain a clean and organized construction site, • Work together in a team environment, • Learn to operate rock drills, • Operate construction equipment such as excavator, all terrain forklifts, man lifts, skid steers, and front end loaders Qualifications Basic Qualifications Prior concrete experience such as a concrete finisher/form builder or shotcrete experience • Must not be afraid of heights, • The ability to travel at least 3 weeks out of every month, • Reliability and a strong work ethic, • A CDL Class A or a clean Motor Vehicle Driving Record Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. • Climates vary in degrees, in tropical to desert environments., • The noise level in the work environment is moderate and hearing protection is often required., • Exposure to characteristic construction site dangers. Travel: 100% travelling in the Eastern US (East of the Mississippi River). Employees are expected to work a 3 weeks on, 1 week off schedule. Pay: $24-$28/hr. In 2023, individuals in this role, with overtime, made the equivalent of over $30/hr. GeoStabilization International, LLC. is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Job Description Job Description SOUTH BAY SANDBLASTING & TANK CLEANING, INC. located in Norfolk, VA shipyard related subcontractor looking to hire an Environmental Health and Safety Technician Job Summary We're seeking an EH&S Technician with commitment to safety. The ideal candidate will provide a variety of duties including but not limited to Ship inspections, training, coordination of hazardous waste removal, sample collection, and more. Candidate can work in confined spaces and has no problem working long hours and weekends. Must be in Norfolk, VA, we are not looking to relocate candidates at this time. Responsibilities: • Performs various physical duties as assigned, • Use proper PPE, • Ship inspections, • Correcting discrepancies, • Training, • Coordination of hazardous waste removal, shipyard hazardous material compliance, • Recordkeeping, • Sample collection, • Industrial hygiene surveys, • Accident investigations, • Provide safety data sheets, • Performs some specialized tasks which may require on-the job training, • Implement and follow the company's safety, quality, and environmental policies Qualifications: • Ability to read labels, safety warnings, and guidelines, • Time management skills, minimal supervision, can manage time effectively, • Attentive to detail and alert always to ensure safety, • Able to receive and follow instructions and communicate with co-workers, • Two years of previous experience in EH&S, • Computer skills in Microsoft Word, Excel, and Power Point, • Must be knowledgeable in OSHA Maritime Standards, • Good written and verbal communication skills Education Requirements: • High school diploma or GED, B.A., Technical/Vocational trade school, or apprenticeship, • Must be certified HAZWOPER and 10-hour OSHA Maritime Safety Working Conditions and Physical Demands: Work is conducted indoors and outdoors frequently exposed to prevailing weather conditions. Work indoor or aboard vessel which may have fumes, chemicals, and heat as well as noise and dust present depending upon the location of work. Safety equipment required. The individual must be able to frequently climb inclined stairways and vertical. Work aboard the vessels can be strenuous and sometimes hazardous. Dynamic, fast-paced outdoor setting with moderate to loud noise levels from production activity in the shipyard. Must be able to stand and walk for long periods of time. Must be flexible to work varying schedules and hours as needed. The physical demands described above are representative of those that may be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Other requirements: All positions require a pre-employment medical test. This employer participates in E-Verify. Must be able to qualify for DBIDS security clearance. Ability to read technical English is a must. U.S. Citizenship is preferred (for some work locations it is required). Must be authorized to work in the U.S. To respond to this ad, you: Please respond to this ad on our website: Women, veterans, and their spouses are encouraged to apply. We are an Equal Opportunity Employer. EEO/AA M/F D/V Job Type: Full-time Job Posted by ApplicantPro

Job DescriptionSalary: $25-35/HR depending on experience CNC Machinist will set up and operate manually controlled machines in skilled precision and bench work in the fabrication, maintenance, repair, and alteration of machinery, machine parts, tools, and equipment. Collins Machine Works has positions open for both day and night shift at both our Fifth Street and Syer Road locations in Portsmouth, Virginia. Applicant must be a US citizen. Access to DoD facilities is required. Company is not able to sponsor work visa for this position. Sign On Bonus Collins Machine Works offers a sign on bonus in the amount of $2,000 to be paid after six months of satisfactory employment performance. Collins Machine Works also offers employee referral bonuses in the amount of $1,000 per referral to be paid after the referred employee completed six months of satisfactory employment performance. Major Responsibilities & Essential Functions • Use precision tools, machinery, and equipment such as lathe, manual milling machine, drill press, hydraulic press, band saw, and a variety of cutting tools and equipment, • Fabricate and shape parts such as tools and machine parts out of metal, • Properly and safely select, align, secure, and remove holding fixtures, cutting tools, attachments, accessories, and materials onto machines, • Recognize, deploy, and properly use inserts, fixtures, and tooling, • Studies applicable drawings and prints of work to be performed and follows instructions, • Must be able to determine the proper tools required to perform given task, • Operates and utilizes lifting aids as necessary to perform work, • Use gauges and measuring instruments to meet tolerance requirements, • Perform daily, regular cleaning and light maintenance tasks on machinery and equipment, • Ability to track parts and jobs in JobBOSS and Travelers, • Perform all tasks in a safe and responsible manner while maintaining safe and clean working environment by complying with procedures, rules, and regulations, • Work overtime as needed on evenings and/or weekends, • Communicates with others to coordinate work in plant, • Other duties as assigned Preferred Machining Skills • Lathes, Grinders, Boring Mills, Planers, Portable Tools, • Turn, Drill, Tap, Bore, Hone, Polish machine processes, • Large part machining experience preferred (ship propeller shafting, ship steering gear, etc.), • In-place machining experience is desired, • Forklift and Crane experience preferred Qualifications • High school diploma or GED, • 3 to 5 years related experience is preferred, • Language skills - effectively communicate and understand job instructions both verbally and written in the English language, • Ability to effectively interpret and translate instructions to other employees in a professional and respectful manner, • Familiarity with Fanuc, Mazatrol, Okuma, DMG/Mori CNC controls, • Have experience with maintaining 0.001" tolerances, • Have a basic understanding of G, D and T, • Have experience in job setup on vertical and horizontal CNC machining centers and CNC turning centers, • Willing to work at both Portsmouth, VA locations as job needs require, • Ability and willingness to learn, • Ability to define problems, collect data, establish facts, and draw valid conclusions, • Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables, • A strong, proven interest in engineering and mechanical systems, • Read blueprints and measuring tools, • Ability to perform basic mathematical computations, • Ability to apply concepts such as fractions, percentages, rations, and proportions to practical situations PHYSICAL DEMANDS • Ability to move or transfer products with an overhead crane, • Ability to lift and move up to 50 lbs. at a time when required, • While performing the duties of the job, the employee is regularly required to stand, walk, reach overhead with hands and arms, stoop, crouch, kneel, climb ladders, and use stairs, • Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception, and ability to adjust focus, • The employee will also be expected to spend time using a computer WORK ENVIRONMENT • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job., • The noise level in the work environment is usually moderate to high.

Job Description Job Description SOUTH BAY SANDBLASTING & TANK CLEANING, INC. shipyard related subcontractor seeking a detail-oriented EHS & QA Coordinator to support our Navy Operations in Norfolk Virginia. Job Summary We're seeking an EHS & QA Coordinator with commitment to build and maintain a Safety Culture & Engagement between workers. The ideal candidate will be responsible for leading programs that protect people from environmental hazards and workplace hazards, while maintaining QA processes and procedures. Candidate can work in confined spaces and has no problem working long hours and weekends. Must be in Norfolk Virginia, we are not looking to relocate candidates at this time. Responsibilities: QA 40% • Assist in implementing and maintain QA processes and procedures, • Coordinate QA inspections and testing, • Maintain QA records, reports, and certifications, • Support non-conforming material tracking and corrective actions, • Assist in implementing and maintaining EHS processes and procedures, • Coordinate EHS inspections, • Maintain EHS records, reports and certifications, • Participate in incident investigations and root cause analysis, • Provide administrative support in EHS and QA teams, • Maintain filing system, both physical and digital, • Assist in document control and revision management, • Train employees and enforce requirements Qualifications: • Strong knowledge of health and safety best practices and legal requirements, • Ability to effectively communicate with all levels of the workforce and management, • Strong organizational skills and the ability to work to a timeline and meet deadlines, • Familiarity with ISO 9001, • Strong verbal and written communication skills, • Two years of previous experience in EHS, QA, or related field, • Computer skills in Microsoft Word, Excel, and Power Point Education Requirements: • High school diploma or GED, B.A., Technical/Vocational trade school, or apprenticeship (Environmental Science, Industrial Hygiene, or Occupational Safety), • Must be certified HAZWOPER, DOT Hazardous Materials, and RCRA Certified. Working Conditions and Physical Demands: Work is conducted indoors and outdoors frequently exposed to prevailing weather conditions. Work indoor or aboard vessel which may have fumes, chemicals, and heat as well as noise and dust present depending upon the location of work. Safety equipment required. The individual must be able to frequently climb inclined stairways and vertical. Work aboard the vessels can be strenuous and sometimes hazardous. Dynamic, fast-paced outdoor setting with moderate to loud noise levels from production activity in the shipyard. Must be able to stand and walk for long periods of time. Must be flexible to work varying schedules and hours as needed. The physical demands described above are representative of those that may be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Other requirements: All positions require a pre-employment medical test. This employer participates in E-Verify. Must be able to qualify for DBIDS security clearance. Ability to read technical English is a must. U.S. Citizenship is preferred (for some work locations it is required). Must be authorized to work in the U.S. To respond to this ad, you: Please respond to this ad on our website: Women, veterans, and their spouses are encouraged to apply. We are an Equal Opportunity Employer. EEO/AA M/F D/V Job Type: Full-time Job Posted by ApplicantPro

Job Description Construction Superintendent Why Berks Construction? 5 REASONS WHY TO CONTACT US ABOUT THIS OPPORTUNITY. * Employees First: It’s simple, we believe our employees are the most important asset we have. Our “Employees & Families First” culture trickles down to creating satisfied customers. Our employees feel supported and valued by the company, and in return, they are committed to providing excellent care to every customer. * Repeat Business: 70% of our business is “Repeat Business”. This means that Berks Construction creates relationships. We understand that by creating and maintaining relationships with our Customers and Employees helps solidify our consistent “Repeat Business” pipeline of work. * Always has Work: Berks Construction Group has a policy to keep people working. During Covid when other companies were laying off, Berks Construction Group doubled its workforce. Our history has been that when the economy gets slow, Berks Construction Group doubles down on marketing and estimating to maintain growth even in a slower economy. * Our Benefits: Our benefits are first class. Top rated health Insurance, dental, Vision, paid life insurance. From 8%/4% 401k matching to Employer paid disability just in case you get hurt away from our job, you can still take care of your family. We provide you with a computer, phone allowance, credit card, hotel lodging, transportation, food per-diem, etc. * We Pay More: We pay you what you deserve to be paid. Too many employers only pay their employees what they think is necessary, not what the employee truly deserves. Remember, by caring for our employees and their families, we foster loyalty, leading to repeat business and long-term success with our customers! ABOUT US: Berks Construction Group is a National General Contractor who focusses on the following business sectors: Retail, Big Box Retail, Restaurants, Medical Offices, Fitness, Health and Wellness, Dental, Urgent Care Facilities etc. We perform Fit Outs/Retrofits & Ground Up construction. Your Responsibilities: Jointly responsible with the Project Manager for the overall success of the project. Responsible for meeting schedule, controlling costs, and managing manpower and equipment (if applicable) on assigned project. Provides continuous hands-on field supervision of all construction operations, including subcontractors and other construction related personnel, directing them in the planning, scheduling, and execution of work on time, within budget, and with high standards of workmanship. Attains or exceeds profit goals and promotes workplace safety while meeting or exceeding owner’s expectations. Promotes a positive company image. Is the leader on every project and is ultimately responsible for its operational success. QUALIFICATIONS Experience and Employee Requirements: * 10+ years’ experience in Commercial Supervision of Ground Up and Fit Outs of Projects for a General Contractor * 10+ years reading and interpreting Drawings/Blueprints. * OSHA certifications (preferred) * Have a valid driver’s license with the ability to travel. * Authorization to work in the United States indefinitely without restriction or sponsorship. * Ability to work additional hours to meet business plan goals. * Skills: * Ability to quickly read and understand blueprints/plans. * Very Organized with a strong eye for detail * Working knowledge of using a laptop, Microsoft Word, internet, Procore and Excel knowledge a plus. * Ability to read and interpret drawings and verify that the lays being done by the various subcontractors are accurate. * RESPONSIBILITIES * Perform project supervision under the direction of a Project Manager. * Meet with Project Manager for project to review the project in Project Turnover Meeting * Attending the pre-construction meeting, all project progress meetings and weekly safety and informational meetings. * Lead the on-site team from construction start through project close. * Monitoring and ensuring on-site safety compliance, cleanliness, and orderliness. * Proactively identify and help remedy design deficiencies, schedule concerns, and other project-specific issues. Maintaining the Schedule: * Maintaining or exceeding job schedule as provided by updating and providing each week a 2-3 week “look ahead” schedule. Super will “WORK THEIR SCHEDULE” by calling subs in advance to discuss upcoming inspections, milestones, and the amount manpower they are going to provide on a daily basis. Verify with each of these subs that they have procured the necessary equipment and materials to be on site on the required date to meet the schedule. * Review progress of the project and adjust work schedules and request additional manpower from the subcontractors needed to maintain the schedule of the project. * Maintaining knowledge of current plans, specs and submittal data (including authorized revisions) * Inspect work in progress to make sure workmanship meets specifications and is on schedule * Maintaining on a daily basis a set of red line drawings during the project duration * Review contract documents and provide guidance on constructability issues. The ideal candidate will help consistently deliver projects on time, on budget, exceed client expectations and take responsibility for assisting and maintaining relationships with clients. The key responsibilities of a Superintendent include, but are not limited to: * Preferred 5-10 years Commercial Construction Superintendent experience with thorough knowledge in Retail, Big Box Retail, Restaurants, Medical Offices, Fitness, Health and Wellness, Dental, Urgent Care Facilities etc. * Excellent organizational, planning and leadership skills ability to handle stress and interact with others. * Effective written communication and verbal interpersonal skills. * Ability to effectively present information and respond to questions from managers, clients, and team members. * Excellent supervisory and analytical skills. * Experience with Windows-based applications such as Word, Excel, Outlook, and various scheduling packages. * Must have a valid driver’s license * Work in partnership with the project manager to identify and address issues of constructability or lack of scope during the preconstruction phase. * Develop a comprehensive understanding of project strategy and commitments including financial goals, scheduling, logistics, phasing, milestones, and inspections. * Create and maintain 3-Week Look Ahead: cross-reference with the Master CPM Schedule to assure job progress is maintained. * Create and submit various reports, Daily Job reports, Incident reports * Knowledge of Procore a plus. * Maintain and review the punch list process to ensure all are addressed and executed in a timely manner. * Everything needed to complete your job is provided by BCG i.e., Computer, phone, credit card, hotel lodging, transportation, etc. The Benefits: * Health Insurance * Dental * Vision * Life Insurance * Short-term Disability (STD) paid by employer with optional long-term disability * Travel Per Diem * 401K * PTO * Paid holidays * Field Bonus Incentive In Closing: * Thank you for your interest in employment with Berks Construction Group, LLC. At BCG, we invest in our people, providing the essential training, instruction, and supervisory support that they need to develop and grow within our company. We acknowledge that BCG's strength and success is directly related to our employees and the talents, dedication, and job performance they exemplify. We seek dynamic, motivated people who are driven to make a difference. * BCG does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans’ status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team. * Berks Construction Group, LLC. is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, gender identify sexual orientation or protected veteran status. Company DescriptionBerks Construction Group, LLC is a Commercial General Contractor and Construction manager with offices in PA & NJ. Our work sectors include Medical, Dental, Corporate Fit-outs, Restaurants, Health and fitness. Our target regions are PA, NJ, NY, MD, DE, VA, CT. We employ some of the best talent in our geographic region and market place vertical.Berks Construction Group, LLC is a Commercial General Contractor and Construction manager with offices in PA & NJ. Our work sectors include Medical, Dental, Corporate Fit-outs, Restaurants, Health and fitness. Our target regions are PA, NJ, NY, MD, DE, VA, CT. We employ some of the best talent in our geographic region and market place vertical.

Job Description Position: Senior Superintendent – Commercial Construction Location: Hampton Roads Regional Area A respected, regionally focused general contractor with a strong track record of delivering quality projects is seeking a Superintendent to oversee medium- to large-scale projects in the Hampton Roads area. The company emphasizes a people-first culture, award-winning safety practices, and projects that leave a lasting impact on both communities and military installations. Key Responsibilities: · Lead daily site operations and provide direction to subcontractors and trades. · Collaborate closely with the Project Manager from pre-construction through project closeout. · Maintain strong client and subcontractor relationships built on trust and communication. · Ensure safety and quality standards are upheld in line with contract documents and specifications. · Oversee scheduling, production, and performance to keep projects on track and within budget. Qualifications: · High school diploma or equivalent. · 10+ years of experience as a Superintendent on vertical construction (renovations or new builds). · Solid understanding of commercial, municipal, and federal construction processes. · Strong leadership, communication, and organizational skills. What’s in It for You: · Competitive salary range of $120K–$145K (based on experience). · Comprehensive benefits package, including healthcare and retirement contributions. · Opportunity to grow with a contractor recognized nationally for its safety and performance record. · A people-centered culture where employees are treated like family and career growth is encouraged. · Be part of a team that takes pride in projects with real community and regional impact. Keywords: Construction Jobs, Construction Professionals Commercial Construction, Federal Construction, Construction Superintendent, Project Superintendent, Senior Superintendent, Site Superintendent, Field Superintendent, Superintendent. Lead Superintendent, General Superintendent, Construction Manager, Army Corps of Engineers, USACE, NAVFAC, RMS, EM 385-1-1, USACE CQC Certification, CQCM Certified, Military, government, federal, commercial construction, institutional construction, subcontractor management, ground up, base building, renovations, higher education, K-12, institutional, municipal, Class A, MILCON, municipal construction, multifamily, residential NAVFAC, RMS/QCS, Norfolk, VA, Richmond, VA, Chesapeake, VA, Virginia Beach, VA, Langley AFB, Hampton, VA, Suffolk, Hampton Roads, Fort Lee, Fort Eustis, Dam Neck, Oceana, Ft. Lee, Newport News, VA, Williamsburg, VA, Quantico, NAS Oceana, Naval Station Norfolk, NOB, Portsmouth, VA, Chesapeake, VA, Elizabeth City, NC, Ft. Belvoir, Alexandria, VA, Washington, DC. Norfolk, VA, Richmond, VA, Virginia. Construction Jobs, Construction Professionals, Construction QC, QCM,CQC, Quality Control, QC, QA, Quality Assurance, CQC, CQCM, ASHE, Three Phases of Control, AFMSA, MEDCOM,, USCG, AirForce, Project Manager, PM, Army Corps of Engineers, USACE, NAVFAC, RMS, EM 385-1-1, USACE CQC Certification, CQCM Certified, Military, government, federal, NAVFAC, RMS/QCS, Norfolk, VA, Richmond, VA, Chesapeake, VA, Virginia Beach, VA, Langley AFB, Hampton, VA, Fort Lee, Fort Eustis, Dam Neck, Oceana, Ft. Lee, Newport News, VA, Williamsburg, VA, Quantico, NAS Oceana, Naval Station Norfolk, NOB, Portsmouth, VA, Chesapeake, VA, Elizabeth City, NC, Ft. Belvoir, Alexandria, VA, Washington, DC. Norfolk, VA, Richmond, VA, Virginia. Company DescriptionSynergy Professionals does not discriminate on the basis of race, gender, age, religion, marital status, disability, or any other protected characteristic.Synergy Professionals does not discriminate on the basis of race, gender, age, religion, marital status, disability, or any other protected characteristic.

Job DescriptionSalary: Summary of Duties Fabrication Technician II is experienced in Fabrication processes to include, but not limited to, the safe use of common hand tools, understanding of measuring devices, and can read/interpret blueprints. At times, tasks assigned by the Fabrication Shop Supervisor with little or no direct supervision of a Fabrication team member and in accordance with company work instructions. Periodically required to lift/move equipment up to and including 50 pounds. Additional duties and/or responsibilities of other positions may also be assigned for which qualifications are met. Specific Description of Duties - Responsible for transporting material/tools within Fabrication Shop; standing fire watch; painting; blasting; safe operation of machines for cutting, bending, rolling, shaping; and assisting in metal preparation/fit up for welding.Also, must have working knowledge with basic fabrication equipment to include but not limited to: o Vertical Saw o Horizontal Saw o Iron Worker o Manual Press Brake o Hydraulic Press Brake o Blasting Cabinet o Forklift o Pneumatic and Electric hand tools o Drill press Overtime is routinely required but not guaranteed.Perform any other assignments or tasks as needed or requested by management to assist inaccomplishing the organization's mission, objectives and goals. Certifications, Qualifications, Education Requirements - HS diploma or GED may be required depending on varying contract stipulations. Associates degree or trade school certificate preferred, but not required (in related field) Must have 2+ years of related experience. Must have 2+ years of fabrication shop experience. Security Clearance - Clearance up to secret level may be required. Must be a U.S. citizen Certification / Licenses (as required for the task being performed) Fire watch certification Physical/Environmental Job Requirements - Physical requirements include the following: Lifting/moving up to and including 50 pounds Standing for long periods of time In performing these duties, you may be required to work outdoors. You will experiencevariations, extremely loud noises, and other physical hazards. Company Overview: Prism Maritime, LLC is a premier maritime service provider for Alteration Installation Team (AIT) and Modernization related Services in support of US Maritime and Shore-based clients. Prism Maritime is a privately held business headquartered in Chesapeake, VA, with offices in San Diego and Ventura, CA. Established in 2006, Prism Maritime currently employs over 350 professionals and maintains an ISO 9001-2015 certified Quality Management System. Prism Maritime is an EEO/AA employer. We invite resumes from all interested parties without regard to race, color, religion, sex, national origin, ethnic origin, physical or mental disability, veteran status, age, or any other characteristic protected by federal, state, or local laws. U.S. citizenship is required for most positions. If you need special assistance or an accommodation while seeking employment with us, please email or call: 757-460-8800. To Apply: Visit click on Careers>Job Openings All applications are active for 90 calendar days. After 90 days you must re-apply to still be considered for this position.

Job DescriptionSalary: Summary of Duties Fabrication Technician Ill is experienced in Fabrication processes to include, but not limited to,the safe use of common hand tools, advanced understanding of measuring devices, and can read/interpret/conveyblueprints. Execute tasks assigned by the Fabrication Shop Supervisor with little or no direct supervision and inaccordance with company work instructions. Frequently required to lift/move equipment up to and including 50pounds. Additional duties and/or responsibilities of other positions may also be assigned for which qualifications aremet. Working knowledge of, but not limited to, NAVSEA specifications and Maritime Industry Standards. Specific Description of Duties - Responsible for transporting material/tools within Fabrication Shop; standing fire watch; painting; blasting; proficient safe operation of machines for cutting, burning, bending, rolling, shaping; and assisting in metal preparation/fit up for welding. o Must have advanced working knowledge with basic fabrication equipment to include but not limited to: o Vertical Saw o Horizontal Saw o Iron Worker o Manual Press Brake o Hydraulic Press Brake o Blasting Cabinet o Forklift o Pneumatic and Electric hand tools o Drill press o Overhead crane o Oxy fuel torch o Overtime is routinely required but not guaranteed o Perform any other assignments or tasks as needed or requested by management to assist in accomplishing the organization's mission, objectives and goals. Certifications, Qualifications, Education Requirements - HS diploma or GED may be required depending on varying contract stipulations. Associates degree or trade school certificate preferred, but not required (in related field) Must have 5+ years of related experience. Must have 5+ years of fabrication shop experience. Demonstrated ability to work independently and solve issues with little or no guidance. Certification / Licenses (as required for the task being performed) - Fire watch certification Forklift License preferred Security Clearance - Clearance up to secret level may be required. Must be a U.S. citizen Physical/Environmental Job Requirements - Physical requirements include the following: Lifting/moving up to and including 50 pounds Standing for long periods of time In performing these duties, you may be required to work outdoors. You will experiencevariations, extremely loud noises, and other physical hazards. Company Overview: Prism Maritime, LLC is a premier maritime service provider for Alteration Installation Team (AIT) and Modernization related Services in support of US Maritime and Shore-based clients. Prism Maritime is a privately held business headquartered in Chesapeake, VA, with offices in San Diego and Ventura, CA. Established in 2006, Prism Maritime currently employs over 350 professionals and maintains an ISO 9001-2015 certified Quality Management System. Prism Maritime is an EEO/AA employer. We invite resumes from all interested parties without regard to race, color, religion, sex, national origin, ethnic origin, physical or mental disability, veteran status, age, or any other characteristic protected by federal, state, or local laws. U.S. citizenship is required for most positions. If you need special assistance or an accommodation while seeking employment with us, please email or call: 757-460-8800. To Apply: Visit click on Careers>Job Openings All applications are active for 90 calendar days. After 90 days you must re-apply to still be considered for this position.

Job DescriptionSalary: Summary of Duties Fabrication Technician I possess a basic understanding of Fabrication processes to include, but not limited to, the safe use of common hand tools, basic understanding of measuring devices, and can read blueprints. Tasks are accomplished as assigned by the Fabrication Shop Supervisor or under the supervision of a senior Fabrication team member and in accordance with company work instructions. Periodically required to lift/move equipment up to and including 50 pounds. Additional duties and/or responsibilities of other positions may also be assigned for which qualifications are met. Specific Description of Duties - Responsible for transporting material/tools within Fabrication Shop; standing fire watch; painting; blasting; safe operation of machines for cutting, bending, rolling, shaping; and assisting in metal preparation/fit up for welding.Also must be familiar with basic fabrication equipment to include but not limited to: o Vertical Saw o Horizontal Saw o Iron Worker o Manual Press Brake o Hydraulic Press Brake o Blasting Cabinet o Forklift o Pneumatic and Electric hand tools o Drill press Overtime is routinely required but not guaranteed.Perform any other assignments or tasks as needed or requested by management to assist inaccomplishing the organization's mission, objectives and goals. Certifications, Qualifications, Education Requirements - HS diploma or GED may be required depending on varying contract stipulations. Associates degree or trade school certificate preferred, but not required (in related field), or 12 months related experience. Certification / Licenses (as required for the task being performed) Fire watch certification Security Clearance - Clearance up to secret level may be required. Must be a U.S. citizen Physical/Environmental Job Requirements - Physical requirements include the following: Lifting/moving up to and including 50 pounds Standing for long periods of time In performing these duties, you may be required to work outdoors. You will experience temperature variations, extremely loud noises, and other physical hazards. Company Overview: Prism Maritime, LLC is a premier maritime service provider for Alteration Installation Team (AIT) and Modernization related Services in support of US Maritime and Shore-based clients. Prism Maritime is a privately held business headquartered in Chesapeake, VA, with offices in San Diego and Ventura, CA. Established in 2006, Prism Maritime currently employs over 350 professionals and maintains an ISO 9001-2015 certified Quality Management System. Prism Maritime is an EEO/AA employer. We invite resumes from all interested parties without regard to race, color, religion, sex, national origin, ethnic origin, physical or mental disability, veteran status, age, or any other characteristic protected by federal, state, or local laws. U.S. citizenship is required for most positions. If you need special assistance or an accommodation while seeking employment with us, please email or call: 757-460-8800. To Apply: Visit click on Careers>Job Openings All applications are active for 90 calendar days. After 90 days you must re-apply to still be considered for this position.

Requisition Number: 25629 Required Travel: 26 - 50% Employment Type: Full Time/Hourly/Non-Exempt Anticipated Salary Range: $50,000.00 - $60,000.00 Security Clearance: Ability to Obtain Level of Experience: Mid Meet HII's Mission Technologies Division Our team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense - the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class. Find the role that's right for you. Apply today. We look forward to meeting you. To learn more about Mission Technologies, click here for a short video: Summary Join HII as we keep the world's most powerful Navy afloat! Join our Elevator Support Unit (ESU) as a Marine Mechanic! This position will support contracted skilled trades work on Weapon Elevators and Aircraft Elevators and their systems on U.S. Navy ships. Travel within and outside of the continental United States may be required. This is a full-time position, located in Chesapeake, VA. What You Will Do • Installs, operates, maintains, repairs and modifies shipboard elevator mechanical and hydraulic equipment., • Performs a variety of maintenance and technical support on elevators and elevator doors such as equipment, integrated systems and subsystems, and software at customer and/or field locations., • Analyzes and evaluates elevator operations and related performance., • Troubleshoots, diagnoses malfunctions, and grooms elevators to eliminate problem in minimum time. Installs, upgrades and removes elevator and elevator door components ensuring coordinative engineering field change., • Applies comprehensive understanding of production and processes toward completion of assignments., • Responsible for interfacing with customers, managing subcontractors and ability to provide work direction to others., • Develops and uses technical documents including controlled work packages, formal work processes and procedures, test documents, reports and task or trip reports., • Schedules, reports and briefs customers and senior management. Performs duties outside of specialty in order to complete installation or work assignment.\n What You Must Have • High School education, or Trade School or equivalent, and 4 years of related experience., • Must provide own hand tools as designated per trades specialty., • Must have experience performing troubleshooting, preventative maintenance and testing of mechanical systems., • Must be able to read drawings and schematics., • Must be able to conduct on-site installation of equipment while following established safety, qualify control & testing procedures., • Must be able to calibrate and make minor repairs on tools/equipment., • Must be able to obtain and maintain base access credentials., • Must be able to obtain and maintain a DoD Security Clearance., • Must be a U.S. Citizen.\n Preferred: Bonus Points For • Experience related to maintenance and repair of shipboard aircraft elevator and/or ordnance handling equipment and vertical package conveyors preferred., • Experience in the operation, repair and maintenance of marine electro-mechanical and/or hydraulic systems highly desired., • Prior Shipboard experience preferred., • Candidates who hold a current or active DoD secret clearance or higher preferred., • Candidate with related technical training, degrees and/or certifications preferred.\n Physical Requirements Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces. Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels. May ride ships at sea for extended periods. May require wearing a respirator. Travel may be required within and outside of the continental United States. HII is more than a job - it's an opportunity to build a new future. We offer competitive benefits such as best-in-class medical, dental and vision plan choices; wellness resources; employee assistance programs; Savings Plan Options (401(k)); financial planning tools, life insurance; employee discounts; paid holidays and paid time off; tuition reimbursement; as well as early childhood and post-secondary education scholarships. Bonus/other non-recurrent compensation is occasionally offered for qualified positions, and if applicable to this role will be addressed by the recruiter at the screening phase of application. The listed salary range for this role is intended as a good faith estimate based on the role's location, expectations, and responsibilities. When extending an offer, HII's Mission Technologies division takes a variety of factors into consideration which include, but are not limited to, the role's function and a candidate's education or training, work experience, and key skills. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this email address. Additionally, you may also call 1-844-849-8463 for assistance. Press #3 for HII Mission Technologies.

About Us When you work at Chugach Government Solutions (CGS), you join a proud legacy of supporting missions while sustaining culture. The federal division of Chugach Alaska Corporation, CGS has been supporting critical missions as a government contractor for over 25 years. Our focus is to support facility maintenance, IT/technical services, construction and education. We are proud to have built, and continue to foster, an incredibly talented team spanning across the globe in hundreds of different fields - each team member proud to serve our country with first-class business services, while also making a difference for our Chugach shareholders. At CGS, empowering employees is a part of our core, and that focus is one of the ways we build and foster high-performing teams. We empower our employees through competitive compensation and benefits package, professional growth opportunities, truthful communication, and more! If you are looking for an opportunity to serve something bigger than yourself; if you want your day job to be one that creates meaningful value; if you are looking for an environment that highly values employees and respects individual differences - then Chugach Government Solutions may be the right fit for you! Job Overview The role of the welder is to provide day-to-day Shipboard installation and welding support for a variety of RF, audio, video, and communication systems installations. This position reports to the Installation Group Project Manager. This job posting is always active. Resumes will be collected even when there are no openings. Work Model: Onsite Responsibilities Essential Duties & Job Functions: \n • Working with Task Leaders, program/project managers, and SMEs, the welder will assist with:\n, • the Shipboard installation and integration of complex audio visual display\n, • various communication and electronic warfare systems\n, • related ancillary and computer based systems onboard naval ships and command centers worldwide.\n Mandatory: \n • Must be a U.S. citizen.\n, • Must have or be able to obtain a Secret clearance.\n, • Must have High School diploma.\n, • Must be willing to travel up to 75% CONUS/OCONUS.\n, • Must be willing to work extended hours including weekends and holidays.\n, • Must have a valid driver's license and reliable transportation.\n, • Must have experience in welding steel and aluminum.\n, • Must have experience welding in a shipyard environment.\n, • Must have the ability to lay out and perform structural modifications and install foundations based on reading SIDs and ICDs\n, • Must be willing to perform other installation tasks in addition to welding. Such as cable installation, priming, lagging, painting, on load and offload of equipment and materials.\n, • Must be able to successfully pass a pre-employment background check and pre-hire drug test.\n\n Preferred: \n • Experience brazing copper nickel pipe and Oxy Fuel torch operation.\n, • CPR and first aid training experience.\n, • Confined space training.\n, • Climber safety training.\n\n Working Conditions: \n • This is a full-time position in support of the Chugach integration and installation tasking team lead. The work may be performed at (Location TBD), industrial areas to include; shipyard, Navy/Coast Guard bases, shipboard and shore site locations.\n, • Work is performed inside industrial environments and subject to working around exposures to hazards that may cause bodily harm, cuts, bruises, burns, etc.\n, • Work may also be performed outside even during in climate weather.\n, • Work may be performed at heights (aloft) where fall protection is required. \n, • Work may be performed welding and cutting of metal.\n, • Work may be performed off a ladder.\n\n Physical Requirements: \n • Ability to lift 45 lbs., climb vertical ladders, operate and work around heavy machinery.\n, • Work at heights (aloft).\n, • Operate power tools safely.\n, • Carry equipment and machinery around ships. \n, • Ability to stand and walk most of the shift.\n, • Kneel and crawl at work site.\n, • Crouch through void openings.\n, • Safely evacuate ship during an emergency.\n\n Reasonable Accommodation: CGS will provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position with Chugach Government Solutions or any of its subsidiaries, please email [email protected]. Equal Employment Opportunity: Chugach is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, gender, sexual orientation, gender identity or expression, age, pregnancy, disability, genetic factors, protected veteran status or other characteristics protected by law.

Job Description Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is an industry leader, providing engineering and industrial services to the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other DoD organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to learn, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. Our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we're looking for 'the best at what they do' to join our team and help us grow. *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Veteran and retired candidates welcome! Job Overview: Continental Tide is seeking an experienced and skilled Welder II for our Norfolk, VA office beginning on or around June 2nd . The successful candidate will join our Fleet Services Group performing various ship repair, modernization and Alteration Installation Team (AIT) projects. Duties & responsibilities include, but are not limited to the following: \n • Knowledgeable in joining, fabricating, and repairing metal and other weldable material by applying appropriate welding techniques.\n, • Perform various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems.\n, • Fabricate and install fixtures and jigs required for welding process alignments.\n, • Interprets blueprints, specifications, diagrams or schematics to determine appropriate welding process.\n, • Must be able to select required welding filler materials, joint design, heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD.\n, • Inspects completed welds to determine structural soundness and adherence to NAVSEA, ABS & AWS standards. Installs or repairs equipment, such as pipes, valves, floors and tank linings.\n, • Leads technical project teams, schedules, reports and briefs customers and senior management.\n, • Performs duties outside of specialty in order to complete installation or work assignment.\n, • Experience in SMAW, GMAW & GTAW, Ship Fitting and OXY ACC & Propane GAS Cutting torch.\n, • Able to weld multiple types, thicknesses & sizes of pipe, plate & bar material in horizontal, overhead and/or vertical positions.\n\n Experience and Skills \n • Must possess a high school, trade or vocational school degree\n, • 5-10 years of direct experience in ship repair and installation of HM&E systems and equipment\n, • Ability to read and interpret ship installation drawings, installation specifications and NAVSEA Standard Items is preferred\n, • Must have or have the ability to obtain a SECRET clearance\n, • Must have the ability to obtain base access and security credentials\n, • Ability to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs\n, • Ability to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces\n, • Travel may be required within and outside of the continental United States\n, • Due to export control regulations, this role is open to U.S. citizens of the US \n, • Demonstrated reliability and punctuality; must be able to consistently report to work on time\n, • Possess basic and some advanced specialized welder's tools\n\n Job Benefits Continental Tide offers an empowering professional environment in a culture that emphasizes teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Continental Tide is an Equal Opportunity Employer and participates in E-Verify and U.S. citizenship is required for most positions. Continental Tide prohibits discrimination against any protected class from discrimination on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. These protections extend to all management practices and decisions, including recruitment and hiring, appraisal systems, promotions, training, and career development programs. Consistent with these obligations, Continental Tide also provides reasonable accommodations to employees and applicants with disabilities; known limitations related to pregnancy, childbirth, or related medical conditions; and for sincerely held religious beliefs, observances, and practices. Reasonable Accommodations Statement: To perform this job successfully, an individual must perform the essential job duties satisfactorily with or without reasonable accommodation and without posing a direct threat to the safety or health of employee or others. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Apply Today: If you're ready to make a difference, we encourage you to apply and become a part of our mission to deliver quality solutions to the Fleet. To be considered you must apply by going to See all of our latest opportunities at or follow us on our LinkedIn page at Continental Tides Defense Systems, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran". "This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans."

About Us When you work at Chugach Government Solutions (CGS), you join a proud legacy of supporting missions while sustaining culture. The federal division of Chugach Alaska Corporation, CGS has been supporting critical missions as a government contractor for over 25 years. Our focus is to support facility maintenance, IT/technical services, construction and education. We are proud to have built, and continue to foster, an incredibly talented team spanning across the globe in hundreds of different fields - each team member proud to serve our country with first-class business services, while also making a difference for our Chugach shareholders. At CGS, empowering employees is a part of our core, and that focus is one of the ways we build and foster high-performing teams. We empower our employees through competitive compensation and benefits package, professional growth opportunities, truthful communication, and more! If you are looking for an opportunity to serve something bigger than yourself; if you want your day job to be one that creates meaningful value; if you are looking for an environment that highly values employees and respects individual differences - then Chugach Government Solutions may be the right fit for you! Job Overview The role of the welder is to provide day-to-day Shipboard installation and welding support for a variety of RF, audio, video, and communication systems installations. This position reports to the Installation Group Project Manager. This job posting is always active. Resumes will be collected even when there are no openings. Work Model: Onsite Responsibilities Essential Duties & Job Functions: \n • Working with Task Leaders, program/project managers, and SMEs, the welder will assist with:\n, • the Shipboard installation and integration of complex audio visual display\n, • various communication and electronic warfare systems\n, • related ancillary and computer based systems onboard naval ships and command centers worldwide.\n Mandatory: \n • Must be a U.S. citizen.\n, • Must have or be able to obtain a Secret clearance.\n, • Must have High School diploma.\n, • Must be willing to travel up to 75% CONUS/OCONUS.\n, • Must be willing to work extended hours including weekends and holidays.\n, • Must have a valid driver's license and reliable transportation.\n, • Must have experience in welding steel and aluminum.\n, • Must have experience welding in a shipyard environment.\n, • Must have the ability to lay out and perform structural modifications and install foundations based on reading SIDs and ICDs\n, • Must be willing to perform other installation tasks in addition to welding. Such as cable installation, priming, lagging, painting, on load and offload of equipment and materials.\n, • Must be able to successfully pass a pre-employment background check and pre-hire drug test.\n\n Preferred: \n • Experience brazing copper nickel pipe and Oxy Fuel torch operation.\n, • CPR and first aid training experience.\n, • Confined space training.\n, • Climber safety training.\n\n Working Conditions: \n • This is a full-time position in support of the Chugach integration and installation tasking team lead. The work may be performed at (Location TBD), industrial areas to include; shipyard, Navy/Coast Guard bases, shipboard and shore site locations.\n, • Work is performed inside industrial environments and subject to working around exposures to hazards that may cause bodily harm, cuts, bruises, burns, etc.\n, • Work may also be performed outside even during in climate weather.\n, • Work may be performed at heights (aloft) where fall protection is required. \n, • Work may be performed welding and cutting of metal.\n, • Work may be performed off a ladder.\n\n Physical Requirements: \n • Ability to lift 45 lbs., climb vertical ladders, operate and work around heavy machinery.\n, • Work at heights (aloft).\n, • Operate power tools safely.\n, • Carry equipment and machinery around ships. \n, • Ability to stand and walk most of the shift.\n, • Kneel and crawl at work site.\n, • Crouch through void openings.\n, • Safely evacuate ship during an emergency.\n\n Reasonable Accommodation: CGS will provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position with Chugach Government Solutions or any of its subsidiaries, please email [email protected]. Equal Employment Opportunity: Chugach is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, gender, sexual orientation, gender identity or expression, age, pregnancy, disability, genetic factors, protected veteran status or other characteristics protected by law.

1st Class Pipe Welder - 2nd shift Purpose: Colonna's Shipyard is seeking a 1st Class Pipe Welder to support 2nd shift operations in our Shipyard in Norfolk, VA. Job Description: • Weld together metal components of products, as specified by layout, blueprints, diagram, work order, welding procedures, or oral instructions, using electric arc-welding equipment., • Select and execute best method to prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter and to clean, degrease, deoxidize, or desmut weld joint or work piece, using wire brush, portable grinder, or solvent clean/chemical bath, • Weld completion in flat, horizontal, vertical, or overhead positions for at least three base materials using a wide variety of processes., • Fabricate brackets, panels, complex beams and shape structures., • Plumb transverse bulkheads and panels to fabricate enclosures, complex weldments, shapes, plates, simple and complex parts from a drawing or sketch., • Operate and set up of the following equipment; hydraulic jacks and pumps, chain falls, come a longs, Steamboat Ratchets, and slings., • Expertly repair base metal products and completed welds by adding the minimum amount of weld metal or heat and the minimum amount of grinding/smoothing to meet job specification., • Also perform air-arc back gouging and oxy-acetylene torching (e.g. brazing, cutting, or pre-heating), GTAW (Gas Tungsten Arc Welding), and pipe welding, pipe flange and socket welding; as well as qualify to perform either flux cored inner shield welding, weld overlay cladding, automated back gouging, plasma back gouging or any combination thereof., • Mark or tag material with proper job number, piece marks, and other identifying marks as required and always mark completed welds with welder number., • Perform single pass 5/16-inch minimum fillet welds in all positions using FCAW on carbon steel and at least ¼-inch single-pass fillets on two other materials., • Supervise set up to perform welding in accordance with applicable WPS all welding equipment such as: wire feeders, Sub-arc tractors, Bug O's, Power sources, etc., • Clean torches and connect/lay-out cables and whips to optimize performance and perform routine maintenance on all equipment., • Recommend WPSs and WPS upgrades required for a job; when assigned, produces or supervises production, documentation, and testing of PQRs and WPQs., • Reliable, leads by example; trains less-killed welders, enforces good workmanship and safe welding practices throughout the work area; identifies gaps in weld process controls and weld process surveillance inspections and recommends corrective action., • Perform comprehensive workmanship inspection, and when directed those of others, of all welds grinding and joint preparation for NDT processes as applicable; observe QA/NDT hold points as applicable., • Complete standard dimensional computations/ Devise bracing and weld sequencing steps to maintain tolerances and minimize distortions., • Must have at least seven (7) years of Pipe Welding experience., • Must have experience working in physically demanding environments., • Prefer certifications in all positions using the SMAW and GTAW welding processes., • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • May ride ships at sea for extended periods, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator. Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

1st Class Pipe Welder Purpose: Colonna's Shipyard is seeking a 1st Class Pipe Welder to support day shift operations in our Shipyard in Norfolk, VA. Job Description: • Weld together metal components of products, as specified by layout, blueprints, diagram, work order, welding procedures, or oral instructions, using electric arc-welding equipment., • Select and execute best method to prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter and to clean, degrease, deoxidize, or desmut weld joint or work piece, using wire brush, portable grinder, or solvent clean/chemical bath, • Weld completion in flat, horizontal, vertical, or overhead positions for at least three base materials using a wide variety of processes., • Fabricate brackets, panels, complex beams and shape structures., • Plumb transverse bulkheads and panels to fabricate enclosures, complex weldments, shapes, plates, simple and complex parts from a drawing or sketch., • Operate and set up of the following equipment; hydraulic jacks and pumps, chain falls, come a longs, Steamboat Ratchets, and slings., • Expertly repair base metal products and completed welds by adding the minimum amount of weld metal or heat and the minimum amount of grinding/smoothing to meet job specification., • Also perform air-arc back gouging and oxy-acetylene torching (e.g. brazing, cutting, or pre-heating), GTAW (Gas Tungsten Arc Welding), and pipe welding, pipe flange and socket welding; as well as qualify to perform either flux cored inner shield welding, weld overlay cladding, automated back gouging, plasma back gouging or any combination thereof., • Mark or tag material with proper job number, piece marks, and other identifying marks as required and always mark completed welds with welder number., • Perform single pass 5/16-inch minimum fillet welds in all positions using FCAW on carbon steel and at least ¼-inch single-pass fillets on two other materials., • Supervise set up to perform welding in accordance with applicable WPS all welding equipment such as: wire feeders, Sub-arc tractors, Bug O's, Power sources, etc., • Clean torches and connect/lay-out cables and whips to optimize performance and perform routine maintenance on all equipment., • Recommend WPSs and WPS upgrades required for a job; when assigned, produces or supervises production, documentation, and testing of PQRs and WPQs., • Reliable, leads by example; trains less-killed welders, enforces good workmanship and safe welding practices throughout the work area; identifies gaps in weld process controls and weld process surveillance inspections and recommends corrective action., • Perform comprehensive workmanship inspection, and when directed those of others, of all welds grinding and joint preparation for NDT processes as applicable; observe QA/NDT hold points as applicable., • Complete standard dimensional computations/ Devise bracing and weld sequencing steps to maintain tolerances and minimize distortions., • Must have at least seven (7) years of Pipe Welding experience., • Must have experience working in physically demanding environments., • Prefer certifications in all positions using the SMAW and GTAW welding processes., • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • May ride ships at sea for extended periods, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator. Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

Epsilon Systems SRS Repair, Inc. Is seeking a full-time Welder I in Portsmouth, VA. Summary : Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products. Duties and Responsibilities : \n • Operates safety equipment and uses safe work habits.\n, • Welds components in flat, vertical, or overhead positions.\n, • Ignites torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.\n, • Clamps, holds, tack-welds, heat-bends, grinds and/or bolts component parts to obtain required configurations and positions for welding.\n, • Detects faulty operation of equipment and/or defective materials and notify supervisors.\n, • Operates manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.\n, • Monitors the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.\n, • High School Diploma or equivalent.\n, • Knowledge, or experience and must pass qualification test for each process\n, • Ability to obtain and maintain base access to assigned government/military/private installations.\n, • Knowledge of a range of welding principles, processes, and techniques requiring complete penetration and fusion of base and filler metals.\n, • Ability to maintain dimensions and tolerances to specifications, weld parts and structures that vary in size, shape and thickness.\n\n Preferred Qualifications: • Requires walking, reaching, sitting and concentration in the presence of occasional and loud noises.\n, • Able to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships).\n, • Able to lift, carry and move objects up to 50 lbs. in weight.\n, • Must have manual and finger dexterity; able to grasp, manipulate, assemble small objects.\n, • Able to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.\n, • Able to perceive and distinguish normal range of colors.\n, • May be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.\n\n Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

1st Class Pipe Welder - Weld America Purpose: Weld America, a division of Colonna's Shipyard, is seeking 1st Class Pipe Welders to support operations on local (Norfolk, VA) and non-local projects. Job Description: • Weld together metal components of products, as specified by layout, blueprints, diagram, work order, welding procedures, or oral instructions, using electric arc-welding equipment., • Select and execute best method to prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter and to clean, degrease, deoxidize, or desmut weld joint or work piece, using wire brush, portable grinder, or solvent clean/chemical bath, • Weld completion in flat, horizontal, vertical, or overhead positions for at least three base materials using a wide variety of processes., • Fabricate brackets, panels, complex beams and shape structures., • Plumb transverse bulkheads and panels to fabricate enclosures, complex weldments, shapes, plates, simple and complex parts from a drawing or sketch., • Operate and set up of the following equipment; hydraulic jacks and pumps, chain falls, come a longs, Steamboat Ratchets, and slings., • Expertly repair base metal products and completed welds by adding the minimum amount of weld metal or heat and the minimum amount of grinding/smoothing to meet job specification., • Also perform air-arc back gouging and oxy-acetylene torching (e.g. brazing, cutting, or pre-heating), GTAW (Gas Tungsten Arc Welding), and pipe welding, pipe flange and socket welding; as well as qualify to perform either flux cored inner shield welding, weld overlay cladding, automated back gouging, plasma back gouging or any combination thereof., • Mark or tag material with proper job number, piece marks, and other identifying marks as required and always mark completed welds with welder number., • Perform single pass 5/16-inch minimum fillet welds in all positions using FCAW on carbon steel and at least ¼-inch single-pass fillets on two other materials., • Supervise set up to perform welding in accordance with applicable WPS all welding equipment such as: wire feeders, Sub-arc tractors, Bug O's, Power sources, etc., • Clean torches and connect/lay-out cables and whips to optimize performance and perform routine maintenance on all equipment., • Recommend WPSs and WPS upgrades required for a job; when assigned, produces or supervises production, documentation, and testing of PQRs and WPQs., • Reliable, leads by example; trains less-killed welders, enforces good workmanship and safe welding practices throughout the work area; identifies gaps in weld process controls and weld process surveillance inspections and recommends corrective action., • Perform comprehensive workmanship inspection, and when directed those of others, of all welds grinding and joint preparation for NDT processes as applicable; observe QA/NDT hold points as applicable., • Complete standard dimensional computations/ Devise bracing and weld sequencing steps to maintain tolerances and minimize distortions., • Must have at least seven (7) years of Pipe Welding experience., • Must be able to successfully demonstrate TIG CuNi (copper nickel) pipe welding., • Must have experience working in physically demanding environments., • Must have at least 3 years of experience using SMAW (Shielded Metal Arc Welding) or Gas Tungsten Arc (GTAW) welding., • Must be able to work weekends and overtime, as needed., • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • May ride ships at sea for extended periods, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator. Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

Requisition Number: 25615 Required Travel: 0 - 10% Employment Type: Full Time/Hourly/Non-Exempt Anticipated Salary Range: $60,000.00 - $75,000.00 Security Clearance: Ability to Obtain Level of Experience: Mid Meet HII's Mission Technologies Division Our team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense - the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class. Find the role that's right for you. Apply today. We look forward to meeting you. To learn more about Mission Technologies, click here for a short video: Summary Join HII Mission Technologies as a Marine Electrician and make an impact on the safety of our US Navy ships. As a Marine Electrician with our Elevator Support Unit (ESU), you will provide task support by install, operate, maintain maintenance repairs and technical support on equipment. This is a full-time position, locate in Chesapeake, VA. Selected candidate will be required to travel to shipyards and military bases located around the country and abroad when not assigned to a local task. What You Will Do • Support trades team by working on active class surface ships to perform alterations and installations for fleet modernization. Install, operate, maintain, repair, and modify equipment., • Perform a variety of maintenance and technical support on products such as shipboard systems, integrated systems and related equipment/software at company, customer and/or field locations. Provide onsite training of customer support personnel when required. Perform quality inspections on finished product and provide onsite training of customer support personnel when required., • May provide direction and lead others., • Troubleshoot and diagnose malfunctions to eliminate problems in minimum time. Apply comprehensive understanding of production and processes toward completion of assignments., • Interface with customers, manage subcontractors, provide work direction and lead others. May manage one or more multiple jobs. Perform a variety of complicated and non-routine tasks including duties outside of specialty in order to complete installation or work assignment., • Develop and use technical documents including controlled work packages, formal work processes and procedures, test documents, reports and task or trip reports. Schedule, report and brief customers and senior management.\n What You Must Have • High School education, or Trade School or equivalent, and 6 years of related experience., • Must provide own hand tools as designated per trades specialty., • Must have complete comprehension of marine electrical systems, equipment, functions, and tools., • Must have working knowledge and experience with installing, troubleshooting, testing, maintenance and repairs of electrical systems and its associated equipment on marine vessels., • Must be able to read drawings and schematics., • Must be able to follow/enforce safety procedures to ensure a safe and secure work environment., • Must be able to obtain and maintain a DoD secret security clearance and maintain clearance level throughout employment., • Must be able to obtain base access credentials within 60 days of start date and maintain credentials throughout employment., • Must be able to travel when not assigned to local tasking.\n Preferred: Bonus Points For • Candidates who have graduated from and/or completed a vocational school, apprenticeship program or a skilled trades certificate program are preferred., • Experience related to maintenance and repair of shipboard aircraft elevator, Advanced Weapons elevators, and/or ordnance handling equipment and vertical package conveyors preferred., • Candidate with a current or active DoD clearance preferred., • OSHA 10 Maritime Certification a plus., • Basic computer uses and familiarity with Microsoft Office Suite software a plus.\n Physical Requirements Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces. Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels. May ride ships at sea for extended periods. May require wearing a respirator. Travel may be required within and outside of the continental United States. HII is more than a job - it's an opportunity to build a new future. We offer competitive benefits such as best-in-class medical, dental and vision plan choices; wellness resources; employee assistance programs; Savings Plan Options (401(k)); financial planning tools, life insurance; employee discounts; paid holidays and paid time off; tuition reimbursement; as well as early childhood and post-secondary education scholarships. Bonus/other non-recurrent compensation is occasionally offered for qualified positions, and if applicable to this role will be addressed by the recruiter at the screening phase of application. The listed salary range for this role is intended as a good faith estimate based on the role's location, expectations, and responsibilities. When extending an offer, HII's Mission Technologies division takes a variety of factors into consideration which include, but are not limited to, the role's function and a candidate's education or training, work experience, and key skills. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this email address. Additionally, you may also call 1-844-849-8463 for assistance. Press #3 for HII Mission Technologies.

Job Description Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is an industry leader, providing engineering and industrial services to the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other DoD organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to learn, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. Our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we're looking for 'the best at what they do' to join our team and help us grow. *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Veteran and retired candidates welcome! Job Overview: Continental Tide is seeking an experienced and skilled Welder II for our Norfolk, VA office beginning on or around June 2nd . The successful candidate will join our Fleet Services Group performing various ship repair, modernization and Alteration Installation Team (AIT) projects. Duties & responsibilities include, but are not limited to the following: \n • Knowledgeable in joining, fabricating, and repairing metal and other weldable material by applying appropriate welding techniques.\n, • Perform various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems.\n, • Fabricate and install fixtures and jigs required for welding process alignments.\n, • Interprets blueprints, specifications, diagrams or schematics to determine appropriate welding process.\n, • Must be able to select required welding filler materials, joint design, heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD.\n, • Inspects completed welds to determine structural soundness and adherence to NAVSEA, ABS & AWS standards. Installs or repairs equipment, such as pipes, valves, floors and tank linings.\n, • Leads technical project teams, schedules, reports and briefs customers and senior management.\n, • Performs duties outside of specialty in order to complete installation or work assignment.\n, • Experience in SMAW, GMAW & GTAW, Ship Fitting and OXY ACC & Propane GAS Cutting torch.\n, • Able to weld multiple types, thicknesses & sizes of pipe, plate & bar material in horizontal, overhead and/or vertical positions.\n\n Experience and Skills \n • Must possess a high school, trade or vocational school degree\n, • 5-10 years of direct experience in ship repair and installation of HM&E systems and equipment\n, • Ability to read and interpret ship installation drawings, installation specifications and NAVSEA Standard Items is preferred\n, • Must have or have the ability to obtain a SECRET clearance\n, • Must have the ability to obtain base access and security credentials\n, • Ability to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs\n, • Ability to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces\n, • Travel may be required within and outside of the continental United States\n, • Due to export control regulations, this role is open to U.S. citizens of the US \n, • Demonstrated reliability and punctuality; must be able to consistently report to work on time\n, • Possess basic and some advanced specialized welder's tools\n\n Job Benefits Continental Tide offers an empowering professional environment in a culture that emphasizes teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Continental Tide is an Equal Opportunity Employer and participates in E-Verify and U.S. citizenship is required for most positions. Continental Tide prohibits discrimination against any protected class from discrimination on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. These protections extend to all management practices and decisions, including recruitment and hiring, appraisal systems, promotions, training, and career development programs. Consistent with these obligations, Continental Tide also provides reasonable accommodations to employees and applicants with disabilities; known limitations related to pregnancy, childbirth, or related medical conditions; and for sincerely held religious beliefs, observances, and practices. Reasonable Accommodations Statement: To perform this job successfully, an individual must perform the essential job duties satisfactorily with or without reasonable accommodation and without posing a direct threat to the safety or health of employee or others. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Apply Today: If you're ready to make a difference, we encourage you to apply and become a part of our mission to deliver quality solutions to the Fleet. To be considered you must apply by going to See all of our latest opportunities at or follow us on our LinkedIn page at Continental Tides Defense Systems, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran". "This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans."

Requisition Number: 25613 Required Travel: 11 - 25% Employment Type: Full Time/Hourly/Non-Exempt Anticipated Salary Range: $55,000.00 - $70,000.00 Security Clearance: Ability to Obtain Level of Experience: Mid Meet HII's Mission Technologies Division Our team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense - the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class. Find the role that's right for you. Apply today. We look forward to meeting you. To learn more about Mission Technologies, click here for a short video: Summary Join HII Mission Technologies as a Marine Electrician and make an impact on the safety of our US Navy ships. As a Marine Electrician with our Elevator Support Unit (ESU), you will provide task support by install, operate, maintain maintenance repairs and technical support on equipment. This is a full-time position, locate in Chesapeake, VA. Selected candidate will be required to travel to shipyards and military bases located around the country and abroad when not assigned to a local task. What You Will Do • Support trades team by working on active class surface ships to perform alterations and installations for fleet modernization . In stall, operate, maintain, repair, and modify equipment., • Perform a variety of maintenance and technical support on products such as shipboard systems, integrated systems and related equipment/software at company, customer and/or field locations. Provide onsite training of customer support personnel when required. Perform quality inspections on finished product and provide onsite training of customer support personnel when required., • Troubleshoot and diagnose malfunctions to eliminate problems in minimum time. Apply comprehensive understanding of production and processes toward completion of assignments., • Interface with customers, manage subcontractors, provide work direction and lead others. May manage one or more multiple jobs. Perform a variety of complicated and non-routine tasks including duties outside of specialty in order to complete installation or work assignment., • Develop and use technical documents including controlled work packages, formal work processes and procedures, test documents, reports and task or trip reports. Schedule, report and brief customers and senior management. \n What You Must Have • High School education, or Trade School or equivalent, and 4 years of related experience., • Must be a U.S. citizen., • Must provide own hand tools as designated per trades specialty., • Must have complete comprehension of marine electrical systems, equipment, functions, and tools., • Must have working knowledge and experience with installing, troubleshooting, testing, maintenance and repairs of electrical systems and its associated equipment on marine vessels., • Must be proficient in reading electrical drawings and schematics., • Must be able to follow/enforce safety procedures to ensure a safe and secure work environment., • Must be able to obtain and maintain a DoD secret security clearance and maintain clearance level throughout employment., • Must be able to obtain base access credentials within 60 days of start date and maintain credentials throughout employment., • Must be able to travel between 11% - 25% when not assigned to local tasking. \n Preferred: Bonus Points For • Candidates who have graduated from and/or completed a vocational school, apprenticeship program or a skilled trades certificate program are preferred., • Experience related to maintenance and repair of shipboard aircraft elevator, Advanced Weapons elevators, and/or ordnance handling equipment and vertical package conveyors preferred., • Candidate with a current or active DoD clearance preferred., • OSHA 10 Maritime Certification a plus., • Basic computer uses and familiarity with Microsoft Office Suite software a plus. \n Physical Requirements Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces. Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels. May ride ships at sea for extended periods. May require wearing a respirator. Travel may be required within and outside of the continental United States. HII is more than a job - it's an opportunity to build a new future. We offer competitive benefits such as best-in-class medical, dental and vision plan choices; wellness resources; employee assistance programs; Savings Plan Options (401(k)); financial planning tools, life insurance; employee discounts; paid holidays and paid time off; tuition reimbursement; as well as early childhood and post-secondary education scholarships. Bonus/other non-recurrent compensation is occasionally offered for qualified positions, and if applicable to this role will be addressed by the recruiter at the screening phase of application. The listed salary range for this role is intended as a good faith estimate based on the role's location, expectations, and responsibilities. When extending an offer, HII's Mission Technologies division takes a variety of factors into consideration which include, but are not limited to, the role's function and a candidate's education or training, work experience, and key skills. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this email address. Additionally, you may also call 1-844-849-8463 for assistance. Press #3 for HII Mission Technologies.

1st Class Pipe Welder - 2nd shift Purpose: Colonna's Shipyard is seeking a 1st Class Pipe Welder to support 2nd shift operations in our Shipyard in Norfolk, VA. Job Description: • Weld together metal components of products, as specified by layout, blueprints, diagram, work order, welding procedures, or oral instructions, using electric arc-welding equipment., • Select and execute best method to prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter and to clean, degrease, deoxidize, or desmut weld joint or work piece, using wire brush, portable grinder, or solvent clean/chemical bath, • Weld completion in flat, horizontal, vertical, or overhead positions for at least three base materials using a wide variety of processes., • Fabricate brackets, panels, complex beams and shape structures., • Plumb transverse bulkheads and panels to fabricate enclosures, complex weldments, shapes, plates, simple and complex parts from a drawing or sketch., • Operate and set up of the following equipment; hydraulic jacks and pumps, chain falls, come a longs, Steamboat Ratchets, and slings., • Expertly repair base metal products and completed welds by adding the minimum amount of weld metal or heat and the minimum amount of grinding/smoothing to meet job specification., • Also perform air-arc back gouging and oxy-acetylene torching (e.g. brazing, cutting, or pre-heating), GTAW (Gas Tungsten Arc Welding), and pipe welding, pipe flange and socket welding; as well as qualify to perform either flux cored inner shield welding, weld overlay cladding, automated back gouging, plasma back gouging or any combination thereof., • Mark or tag material with proper job number, piece marks, and other identifying marks as required and always mark completed welds with welder number., • Perform single pass 5/16-inch minimum fillet welds in all positions using FCAW on carbon steel and at least ¼-inch single-pass fillets on two other materials., • Supervise set up to perform welding in accordance with applicable WPS all welding equipment such as: wire feeders, Sub-arc tractors, Bug O's, Power sources, etc., • Clean torches and connect/lay-out cables and whips to optimize performance and perform routine maintenance on all equipment., • Recommend WPSs and WPS upgrades required for a job; when assigned, produces or supervises production, documentation, and testing of PQRs and WPQs., • Reliable, leads by example; trains less-killed welders, enforces good workmanship and safe welding practices throughout the work area; identifies gaps in weld process controls and weld process surveillance inspections and recommends corrective action., • Perform comprehensive workmanship inspection, and when directed those of others, of all welds grinding and joint preparation for NDT processes as applicable; observe QA/NDT hold points as applicable., • Complete standard dimensional computations/ Devise bracing and weld sequencing steps to maintain tolerances and minimize distortions., • Must have at least seven (7) years of Pipe Welding experience., • Must have experience working in physically demanding environments., • Prefer certifications in all positions using the SMAW and GTAW welding processes., • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • May ride ships at sea for extended periods, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator. Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

About Us When you work at Chugach Government Solutions (CGS), you join a proud legacy of supporting missions while sustaining culture. The federal division of Chugach Alaska Corporation, CGS has been supporting critical missions as a government contractor for over 25 years. Our focus is to support facility maintenance, IT/technical services, construction and education. We are proud to have built, and continue to foster, an incredibly talented team spanning across the globe in hundreds of different fields - each team member proud to serve our country with first-class business services, while also making a difference for our Chugach shareholders. At CGS, empowering employees is a part of our core, and that focus is one of the ways we build and foster high-performing teams. We empower our employees through competitive compensation and benefits package, professional growth opportunities, truthful communication, and more! If you are looking for an opportunity to serve something bigger than yourself; if you want your day job to be one that creates meaningful value; if you are looking for an environment that highly values employees and respects individual differences - then Chugach Government Solutions may be the right fit for you! Job Overview The role of the welder is to provide day-to-day Shipboard installation and welding support for a variety of RF, audio, video, and communication systems installations. This position reports to the Installation Group Project Manager. This job posting is always active. Resumes will be collected even when there are no openings. Work Model: Onsite Responsibilities Essential Duties & Job Functions: \n • Working with Task Leaders, program/project managers, and SMEs, the welder will assist with:\n, • the Shipboard installation and integration of complex audio visual display\n, • various communication and electronic warfare systems\n, • related ancillary and computer based systems onboard naval ships and command centers worldwide.\n Mandatory: \n • Must be a U.S. citizen.\n, • Must have or be able to obtain a Secret clearance.\n, • Must have High School diploma.\n, • Must be willing to travel up to 75% CONUS/OCONUS.\n, • Must be willing to work extended hours including weekends and holidays.\n, • Must have a valid driver's license and reliable transportation.\n, • Must have experience in welding steel and aluminum.\n, • Must have experience welding in a shipyard environment.\n, • Must have the ability to lay out and perform structural modifications and install foundations based on reading SIDs and ICDs\n, • Must be willing to perform other installation tasks in addition to welding. Such as cable installation, priming, lagging, painting, on load and offload of equipment and materials.\n, • Must be able to successfully pass a pre-employment background check and pre-hire drug test.\n\n Preferred: \n • Experience brazing copper nickel pipe and Oxy Fuel torch operation.\n, • CPR and first aid training experience.\n, • Confined space training.\n, • Climber safety training.\n\n Working Conditions: \n • This is a full-time position in support of the Chugach integration and installation tasking team lead. The work may be performed at (Location TBD), industrial areas to include; shipyard, Navy/Coast Guard bases, shipboard and shore site locations.\n, • Work is performed inside industrial environments and subject to working around exposures to hazards that may cause bodily harm, cuts, bruises, burns, etc.\n, • Work may also be performed outside even during in climate weather.\n, • Work may be performed at heights (aloft) where fall protection is required. \n, • Work may be performed welding and cutting of metal.\n, • Work may be performed off a ladder.\n\n Physical Requirements: \n • Ability to lift 45 lbs., climb vertical ladders, operate and work around heavy machinery.\n, • Work at heights (aloft).\n, • Operate power tools safely.\n, • Carry equipment and machinery around ships. \n, • Ability to stand and walk most of the shift.\n, • Kneel and crawl at work site.\n, • Crouch through void openings.\n, • Safely evacuate ship during an emergency.\n\n Reasonable Accommodation: CGS will provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position with Chugach Government Solutions or any of its subsidiaries, please email [email protected]. Equal Employment Opportunity: Chugach is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, gender, sexual orientation, gender identity or expression, age, pregnancy, disability, genetic factors, protected veteran status or other characteristics protected by law.

Requisition Number: 25615 Required Travel: 0 - 10% Employment Type: Full Time/Hourly/Non-Exempt Anticipated Salary Range: $60,000.00 - $75,000.00 Security Clearance: Ability to Obtain Level of Experience: Mid Meet HII's Mission Technologies Division Our team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense - the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class. Find the role that's right for you. Apply today. We look forward to meeting you. To learn more about Mission Technologies, click here for a short video: Summary Join HII Mission Technologies as a Marine Electrician and make an impact on the safety of our US Navy ships. As a Marine Electrician with our Elevator Support Unit (ESU), you will provide task support by install, operate, maintain maintenance repairs and technical support on equipment. This is a full-time position, locate in Chesapeake, VA. Selected candidate will be required to travel to shipyards and military bases located around the country and abroad when not assigned to a local task. What You Will Do • Support trades team by working on active class surface ships to perform alterations and installations for fleet modernization. Install, operate, maintain, repair, and modify equipment., • Perform a variety of maintenance and technical support on products such as shipboard systems, integrated systems and related equipment/software at company, customer and/or field locations. Provide onsite training of customer support personnel when required. Perform quality inspections on finished product and provide onsite training of customer support personnel when required., • May provide direction and lead others., • Troubleshoot and diagnose malfunctions to eliminate problems in minimum time. Apply comprehensive understanding of production and processes toward completion of assignments., • Interface with customers, manage subcontractors, provide work direction and lead others. May manage one or more multiple jobs. Perform a variety of complicated and non-routine tasks including duties outside of specialty in order to complete installation or work assignment., • Develop and use technical documents including controlled work packages, formal work processes and procedures, test documents, reports and task or trip reports. Schedule, report and brief customers and senior management.\n What You Must Have • High School education, or Trade School or equivalent, and 6 years of related experience., • Must provide own hand tools as designated per trades specialty., • Must have complete comprehension of marine electrical systems, equipment, functions, and tools., • Must have working knowledge and experience with installing, troubleshooting, testing, maintenance and repairs of electrical systems and its associated equipment on marine vessels., • Must be able to read drawings and schematics., • Must be able to follow/enforce safety procedures to ensure a safe and secure work environment., • Must be able to obtain and maintain a DoD secret security clearance and maintain clearance level throughout employment., • Must be able to obtain base access credentials within 60 days of start date and maintain credentials throughout employment., • Must be able to travel when not assigned to local tasking.\n Preferred: Bonus Points For • Candidates who have graduated from and/or completed a vocational school, apprenticeship program or a skilled trades certificate program are preferred., • Experience related to maintenance and repair of shipboard aircraft elevator, Advanced Weapons elevators, and/or ordnance handling equipment and vertical package conveyors preferred., • Candidate with a current or active DoD clearance preferred., • OSHA 10 Maritime Certification a plus., • Basic computer uses and familiarity with Microsoft Office Suite software a plus.\n Physical Requirements Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces. Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels. May ride ships at sea for extended periods. May require wearing a respirator. Travel may be required within and outside of the continental United States. HII is more than a job - it's an opportunity to build a new future. We offer competitive benefits such as best-in-class medical, dental and vision plan choices; wellness resources; employee assistance programs; Savings Plan Options (401(k)); financial planning tools, life insurance; employee discounts; paid holidays and paid time off; tuition reimbursement; as well as early childhood and post-secondary education scholarships. Bonus/other non-recurrent compensation is occasionally offered for qualified positions, and if applicable to this role will be addressed by the recruiter at the screening phase of application. The listed salary range for this role is intended as a good faith estimate based on the role's location, expectations, and responsibilities. When extending an offer, HII's Mission Technologies division takes a variety of factors into consideration which include, but are not limited to, the role's function and a candidate's education or training, work experience, and key skills. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this email address. Additionally, you may also call 1-844-849-8463 for assistance. Press #3 for HII Mission Technologies.

1st Class Pipe Welder - Weld America Purpose: Weld America, a division of Colonna's Shipyard, is seeking 1st Class Pipe Welders to support operations on local (Norfolk, VA) and non-local projects. Job Description: • Weld together metal components of products, as specified by layout, blueprints, diagram, work order, welding procedures, or oral instructions, using electric arc-welding equipment., • Select and execute best method to prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter and to clean, degrease, deoxidize, or desmut weld joint or work piece, using wire brush, portable grinder, or solvent clean/chemical bath, • Weld completion in flat, horizontal, vertical, or overhead positions for at least three base materials using a wide variety of processes., • Fabricate brackets, panels, complex beams and shape structures., • Plumb transverse bulkheads and panels to fabricate enclosures, complex weldments, shapes, plates, simple and complex parts from a drawing or sketch., • Operate and set up of the following equipment; hydraulic jacks and pumps, chain falls, come a longs, Steamboat Ratchets, and slings., • Expertly repair base metal products and completed welds by adding the minimum amount of weld metal or heat and the minimum amount of grinding/smoothing to meet job specification., • Also perform air-arc back gouging and oxy-acetylene torching (e.g. brazing, cutting, or pre-heating), GTAW (Gas Tungsten Arc Welding), and pipe welding, pipe flange and socket welding; as well as qualify to perform either flux cored inner shield welding, weld overlay cladding, automated back gouging, plasma back gouging or any combination thereof., • Mark or tag material with proper job number, piece marks, and other identifying marks as required and always mark completed welds with welder number., • Perform single pass 5/16-inch minimum fillet welds in all positions using FCAW on carbon steel and at least ¼-inch single-pass fillets on two other materials., • Supervise set up to perform welding in accordance with applicable WPS all welding equipment such as: wire feeders, Sub-arc tractors, Bug O's, Power sources, etc., • Clean torches and connect/lay-out cables and whips to optimize performance and perform routine maintenance on all equipment., • Recommend WPSs and WPS upgrades required for a job; when assigned, produces or supervises production, documentation, and testing of PQRs and WPQs., • Reliable, leads by example; trains less-killed welders, enforces good workmanship and safe welding practices throughout the work area; identifies gaps in weld process controls and weld process surveillance inspections and recommends corrective action., • Perform comprehensive workmanship inspection, and when directed those of others, of all welds grinding and joint preparation for NDT processes as applicable; observe QA/NDT hold points as applicable., • Complete standard dimensional computations/ Devise bracing and weld sequencing steps to maintain tolerances and minimize distortions., • Must have at least seven (7) years of Pipe Welding experience., • Must be able to successfully demonstrate TIG CuNi (copper nickel) pipe welding., • Must have experience working in physically demanding environments., • Must have at least 3 years of experience using SMAW (Shielded Metal Arc Welding) or Gas Tungsten Arc (GTAW) welding., • Must be able to work weekends and overtime, as needed., • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • May ride ships at sea for extended periods, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator. Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

Job DescriptionDescription: This position is currently filled, however we are accepting applications for Ready Replacement Pool consideration. Prevailance is seeking an experienced, mission-focused professional to support Commander, Naval Air Force Atlantic (CNAL) Force Security Officer as an Antiterrorism Training Security Monitor (ATSM). This role involves assisting the CNAL Force Security Officer and Assistant Staff Antiterrorism Officer in overseeing and managing security and antiterrorism programs. The ATSM will support antiterrorism and security efforts for Atlantic Fleet Aircraft Carriers, performing the following tasks: • Provide expert guidance and high-level communication for antiterrorism initiatives, • Assist with planning and managing antiterrorism programs, • Coordinate visits and training with security agencies, • Oversee security budgets and financial planning, • Review and enhance aircraft carrier security assessment practices, • Manage security training, evaluation protocols, and related metrics, • Support regional security requirements and specialized personnel security programs, • Proficient in Microsoft Office Suite, • Comprehensive knowledge of aircraft carrier security assessments and antiterrorism readiness, • Minimum 10 years of experience in:, • Planning and managing antiterrorism programs for U.S. Navy Aircraft Carriers, • Administering Antiterrorism Level I annual training, • Coordinating Carrier Strike Group antiterrorism and security assist visits, • Developing and modifying CVN Unit-Level training protocols, metrics, and evaluation criteria, • Minimum 5 years of experience in:, • Managing antiterrorism-related budgets, • Coordinating security force weapons and ammunition requirements, • Overseeing personnel recovery and travel security programs (IATP, PRMS, APACS), • Reviewing aircraft carrier assessment reporting to identify areas for improvement, • Extensive knowledge of U.S. Navy administrative laws, policies, and regulations related to antiterrorism and force security, including DON, OPNAV, USFFC, and CPF program objectives Prevailance, Inc. proudly supports veterans as a member of the V3 (Virginia Values Veterans) program and the Hire Vets initiative. Recognized as a Top Workplace in 2025, Prevailance fosters a supportive, mission-driven environment for its team members. We provide a comprehensive benefits package to eligible employees, designed to support health, wellness, and financial security. Our benefits include: • Medical Insurance, • TriCare Supplemental, • Dental Insurance, • Vision Insurance, • Life & Accidental Death & Dismemberment (AD&D) Coverage, • 401(k) Plan with Company Matching Contributions, • Paid Time Off (PTO), • 11 Paid Holidays, • Education Reimbursement Program

Amee Bay, LLC, a subsidiary of Three Saints Bay, LLC, and a government industry leader, is looking for Naval Shipboard Marine Mechanic to join our Team in Chesapeake, VA. Shipboard Electricians perform a wide variety of tasks depending on the needs of the company. Position Responsibilities: \n • Knowledge of maritime mechanical systems;\n, • Navy tag-out, WAF programs and applicable Naval procedures / instructions;\n, • Maintain QWI and associated forms;\n, • Implements and monitor OSHA safety;\n, • Demonstrated ability to supervise junior personnel;\n, • Understanding of shipboard mechanical machinery equipment and systems such as main propulsion machinery, auxiliary machinery and hydraulics;\n, • Ability to troubleshoot, disassemble, and inspect Hull, Mechanical and Electric (HM&E) equipment;\n, • Ability to disassemble, clean, assess and inspect, reassemble and operationally test mechanical systems;\n, • Knowledge of mechanical systems components such as valves, bearings, gears, remote operators, couplings, system alignment, etc;\n, • Fully versed in the use of all types of precision measuring instruments, such as calipers, micrometers, dial indicators and torque wrenches.\n \n • US Citizenship\n, • Must be able to obtain and maintain active Secret Security Clearance and Base Access; Candidates currently possessing an Active Secret Clearance are preferred.\n, • Experience levels:\n\n • Minimum ten (10) years' experience for 1st Class designation;, • Minimum five (5) years' experience for 2nd Class designation;, • Minimum one (1) year experience for 3rd Class designation; • High School Diploma or equivalent. \n, • Navy 'A' / 'C' school(s) or completion of a vocational, maritime, or equivalent Journeyman training program.\n, • Valid U.S. Driver's License.\n, • Must pass drug screening.\n, • Prior military experience directly related to the position or prior experience in the Maritime Industry.\n, • Prior experience with US Navy Auxiliary equipment including, but not limited to; Cargo/Weapons Elevators, Aircraft Elevators, Deck Edge Doors, Hanger Bay Divisional Doors, Vertical Package Conveyors, 5-inch Ammunition Strikedown Equipment, CIWS Mount Skipboxes.\n, • Prior experience working on Marine Diesel Engines\n, • Prior experience working on Gas Turbine Engines\n\n Position is located in Chesapeake, VA. Apply online at: VEVRAA Federal Contractor Three Saints Bay, LLC and its subsidiaries offer a team-oriented working environment and the opportunity to work with exceptional, dedicated industry professionals. We offer our employees a comprehensive benefits package and the opportunity to take part in exciting projects with government and commercial clients, both domestic and international. We are an Equal Opportunity Employer. We invite resumes from all interested parties without regard to race, color, sex, sexual preference, religion, creed, national origin, age, genetic information, marital or veteran status, disability, or any other category protected by federal, state, or local law.

Job Description Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is an industry leader, providing engineering and industrial services to the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other DoD organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to learn, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. Our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we're looking for 'the best at what they do' to join our team and help us grow. *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Veteran and retired candidates welcome! Job Overview: Continental Tide is seeking an experienced and skilled Welder II for our Norfolk, VA office beginning on or around June 2nd . The successful candidate will join our Fleet Services Group performing various ship repair, modernization and Alteration Installation Team (AIT) projects. Duties & responsibilities include, but are not limited to the following: \n • Knowledgeable in joining, fabricating, and repairing metal and other weldable material by applying appropriate welding techniques.\n, • Perform various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems.\n, • Fabricate and install fixtures and jigs required for welding process alignments.\n, • Interprets blueprints, specifications, diagrams or schematics to determine appropriate welding process.\n, • Must be able to select required welding filler materials, joint design, heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD.\n, • Inspects completed welds to determine structural soundness and adherence to NAVSEA, ABS & AWS standards. Installs or repairs equipment, such as pipes, valves, floors and tank linings.\n, • Leads technical project teams, schedules, reports and briefs customers and senior management.\n, • Performs duties outside of specialty in order to complete installation or work assignment.\n, • Experience in SMAW, GMAW & GTAW, Ship Fitting and OXY ACC & Propane GAS Cutting torch.\n, • Able to weld multiple types, thicknesses & sizes of pipe, plate & bar material in horizontal, overhead and/or vertical positions.\n\n Experience and Skills \n • Must possess a high school, trade or vocational school degree\n, • 5-10 years of direct experience in ship repair and installation of HM&E systems and equipment\n, • Ability to read and interpret ship installation drawings, installation specifications and NAVSEA Standard Items is preferred\n, • Must have or have the ability to obtain a SECRET clearance\n, • Must have the ability to obtain base access and security credentials\n, • Ability to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs\n, • Ability to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces\n, • Travel may be required within and outside of the continental United States\n, • Due to export control regulations, this role is open to U.S. citizens of the US \n, • Demonstrated reliability and punctuality; must be able to consistently report to work on time\n, • Possess basic and some advanced specialized welder's tools\n\n Job Benefits Continental Tide offers an empowering professional environment in a culture that emphasizes teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Continental Tide is an Equal Opportunity Employer and participates in E-Verify and U.S. citizenship is required for most positions. Continental Tide prohibits discrimination against any protected class from discrimination on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. These protections extend to all management practices and decisions, including recruitment and hiring, appraisal systems, promotions, training, and career development programs. Consistent with these obligations, Continental Tide also provides reasonable accommodations to employees and applicants with disabilities; known limitations related to pregnancy, childbirth, or related medical conditions; and for sincerely held religious beliefs, observances, and practices. Reasonable Accommodations Statement: To perform this job successfully, an individual must perform the essential job duties satisfactorily with or without reasonable accommodation and without posing a direct threat to the safety or health of employee or others. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Apply Today: If you're ready to make a difference, we encourage you to apply and become a part of our mission to deliver quality solutions to the Fleet. To be considered you must apply by going to See all of our latest opportunities at or follow us on our LinkedIn page at Continental Tides Defense Systems, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran". "This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans."

Job Description Overview Tradesmen International is immediately hiring experienced Marine Deck Electricians for projects located in and around Newport News, VA. This is a firsts hift opportunity with a pay range of up to $37.31/hour based on experience plus $140/Per Diem to Travelers 60+ miles from the job site. If you are a Marine Deck Electrician and want to work alongside other proven craftsmen who emphasize safety, productivity and superior craftsmanship, this is your chance to advance your career! Job Scope: * Use electrical meters and test instruments (voltohm meters, clamp-on ammeters, insulation resistance testers, meggers, etc.) • Lay off and mount electrical equipment and wireways, • Install cable penetrations in equipment, bulkheads, and decks Minimum of 3+ years in the electrical field (Industrial, Marine, or Commercial Nuclear applications) * Active DOD clearance required * Ability to read and interpret shipboard electrical installation drawings, wiring tables, schematics, and work packages * Able to work independently with proper instruction * Physically able to: climb vertical/inclined ladders, crawl, bend, stoop, work at heights, and work in confined spaces * Must pass Stud Shooting training class and associated vision test (administered by NNS) Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Vacation Pay, • Health insurance, • 401(k) profit-sharing savings plan, • Incentive programs Click here to visit Tradesmen’s full website.

Job Description CTR Group is seeking experienced Shipfitters - Ship Repair in the Norfolk, VA area for full-time positions. Travelers Welcome! Recently separated or retired Navy Hull Technicians encouraged to apply! Pay Range: $30 - $38 per Hour. Plus $150 Per diem. Available to Non-Local Candidates!!! Per diem is paid for days worked. Plus Benefits Benefits: • Generous Pay rates, • First Shift Positions., • Weekly Pay – you receive a paycheck every week, • Comprehensive Benefits– Medical, Paid Holidays, and Paid Vacation! Qualifications SHIPFITTER-Repair experience: Minimum 5 years Must be US citizen Resumes demonstrating ship repair Must be Dbids eligible Must be able to pass tack test Must be able to read blueprints • Must have at least 5 years of experience as a Shipfitter in a Naval / Shipyard environment., • Must have Ship Repair experience, preferably 5 years, • Proficiently skilled in multi-pass tack welding, • Must be able to read and interpret blueprints, diagrams, and drawings, • Must successfully complete a criminal background screen and drug test. Keywords: shipfitter, ship fitter, tack, burn, weld, fabrication, fabricator, marine, shipyard, Naval, Navy, military, clearance, OSHA, Shielded Metal Arc Welding, SMAW, overhead, vertical, shipbuilding, hull technicians, CTR Group is a full-service staffing firm with over 30 years of experience in placing skilled trade's professionals. We employ a diverse team of recruiters that are dedicated to connecting your talents to our client's needs. We have multiple clients with positions available and can help you choose the best fit! CTR Group is an equal employment opportunity employer. Candidates are selected based on qualifications and defined requirements of the job, not on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin or any other protected status. Further, CTR Group encourages United States' Veterans and persons with disabilities to apply for positions for which they are qualified. Company DescriptionCTR group is a full-service employment & recruiting firm, matching the strengths and skills of thousands of candidates with employers. group is a full-service employment & recruiting firm, matching the strengths and skills of thousands of candidates with employers.

Job DescriptionLabor One is hiring Journey-Level Marine Electricians for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for the installation, repair, and hook-up of equipment for electrical services on a ship. The individual must have working knowledge of electrical theory and procedures and the ability to troubleshoot and repair shipboard electrical systems and equipment (600 V and less) in accordance with specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE Must possess the skill sets of subordinate grades of the labor class. DUTIES AND RESPONSIBILITIES -Must comply with OSHA standards and the shipyards best safety practices. --Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) -Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor. Personnel are accountable for completion of daily work assignments. -Keep your work area clean and safe at all times, especially at the end of the shift. -Understand relevant work processes, operation of equipment, and complete tasks proficiently. -Use appropriate sections of IEE, ABS, Coast Guard and manufacturer's tech manuals and ship's information book in repairing electrical equipment and installing electrical equipment. -Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor. -Work shifts and overtime as assigned. -Comply with the Company's “Non-Discrimination and Anti-Harassment ---Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. -Carry out instructions furnished in written, oral, or diagram form. Resolve unexpected events related to your assigned task in a professional manner. Work Tasks Include: 1. Running cables, lines and leads, terminations/connector fabrication, packing of cable transits and harnessing cables aboard vessels., 2. Prepares work area, drills holes, grinds metal surfaces, inspect and reports on cableway and electrical equipment conditions, tests and reports results on electrical equipment., 3. Test internal circuits of major units of electrical equipment for continuity, short circuits, and grounds and measure electrical quantities and compare with established values., 4. Inspect trip shafts, toggle linkages and all other mechanical parts to see that they operate freely without binding., 5. Inspect mechanical and electrical connections including mounting bolts and screws; draw out disconnect devices and control wiring., 6. Detect and locate grounds, open circuits and short circuits in distribution generators and systems. Maintain and repair telephones, circuits, and associated equipment., 7. Install new power and lighting circuits., 8. Must be familiar with all safety procedures pertaining to or where to obtain electrical procedures. Must be very knowledgeable of work/safety procedures and manual., 9. Implement Lock-out Tag-out for work being performed. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. ---The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. -Appropriate --PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. 2nd Shift 40 hours per week / OT per HM approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description HUTCO, INC. Position: Advanced Shipfitter/Fabricator (Multi-Pass Tack & Burn) Job Location: Newport News, VA Shift: Variable, 12:00 AM - 11:59 PM, Sunday - Saturday Rate of Pay: $45 per hour DESCRIPTION: Hutco, Inc. is seeking an Advanced Shipfitter/Fabricator with at least 4years of commercial or naval experience as a first-class Shipfitter. The role involves multi-pass tack welding and fabrication of structural assemblies, using complex structural drawings and blueprints. The position requires working in demanding environments, complying with OSHA regulations, and utilizing precision tools and equipment. REQUIRED EXPERIENCE & SKILLS: • Experience: Minimum of four years as a first-class Shipfitter in a commercial/naval setting (documented experience required)., • Tack Welding Skills: Proficiency in multi-pass tack welding., • Burning & Heating: Ability to use oxygen/propane burning and heating torches., • Blueprint Reading: Comprehension of complex structural assembly drawings, blueprints, weld symbols, and fractional dimensions., • Fabrication & Assembly: Skills in laying off, assembling, and replacing structural piece parts, hull inserts, and penetrations., • Physical Work: Ability to work in physically demanding environments such as shipbuilding and steel fabrication., • OSHA Regulations: Familiarity with shipbuilding industry safety regulations., • Tool Proficiency: Experience using vibratory tools (grinders and needle guns) and air carbon arc gouging. WELDING QUALIFICATION: All Shipfitters must pass the Multi-Pass Tack Welder Qualification Test using the SMAW process with MIL-10718-M (A-5A) filler metal. Tests include: • Vertical Up (3F) and Overhead (4F) positions., • One-hour practice session followed by one-hour tests in both vertical and overhead positions. PHYSICAL REQUIREMENTS: • Ability to lift/carry up to 50 lbs. frequently., • Climbing, crawling, standing, and working in confined spaces., • Exposure to extreme temperatures, humidity, fumes, odors, and dust. Hutco Inc. offers a limited benefit plan through Essential Staff Care. Per diem available for qualified individuals Available plans include: • Medical / Prescription, • Dental Coverage, • Vision Coverage, • Short Term Disability, • Term Life Insurance, • Accidental Death & Dismemberment, • Pay Starting at $45.00/hour Get started with a solid career opportunity in the trades. For more information or to apply, #HUTCOSP

Job DescriptionSalary: $95,000 - $115,000/year Summary: Project Manager executes projects success by directing, coordinating, and supervising project related activities. A project manager plays a vital role in ensuring that shipbuilding and repair projects are completed on time, within budget, and to the required quality standards, all while maintaining a safe and compliant work environment Duties and Responsibilities: Develop detailed project plans outlining the scope, timeline, resources, budget and milestones (PO&AM) Allocate and manage resources, including labor, materials, and equipment, to ensure the project progresses efficiently. Create and oversee project budgets, ensuring that costs are controlled and the project remains financially viable. Develop and maintain project schedules, ensuring that tasks are completed on time and any delays are addressed promptly. Ensure that all work meets the required standards and specifications, conducting inspections and quality control checks as necessary. Enforce safety protocols and regulations to ensure a safe working environment for all employees and subcontractors. Maintain clear and effective communication with clients, vendors, subcontractors, and internal teams, providing regular updates on project status. Identify potential risks and develop strategies to mitigate them, ensuring that any issues are addressed proactively. Ensure all work complies with industry regulations, standards, and legal requirements. Lead and coordinate project teams, providing direction, support, and motivation to achieve project goals. Address and resolve any issues that arise during the project, whether technical, logistical, or personnel related. Prepare and present progress reports to senior management, clients, and other stakeholders, highlighting achievements, challenges, and any required adjustments. Manage contracts with clients, suppliers, and subcontractors, ensuring that all terms are met and any changes are negotiated effectively. Continuously seek ways to improve project processes, enhance efficiency, and implement innovative solutions to complex challenges. *Perform all other duties as assigned. Physical Requirements: Occasionally perform other physical activities as required, such as: o Stooping o Bending o Squatting o Climbing (including but not limited to vertical and incline ladders, mast and kingpost) o Crawling (including but limited to through scuttles, manhole covers, tanks, and voids) Experience Requirements: 3 years of management and/or supervisory experience that includes the overhaul, repair, alteration, and testing of Navy Vessels. 1 years of specialized experience in the planning and management of multiple projects in a shipyard environment. Recent experience pertaining to project management to include: o Financial reporting o Oral and written communications o Interpersonal relations o Managerial techniques Other Requirements: This position requires access to U.S. government or military sites. As such, candidates must be eligible to obtain base access clearance, which includes passing a background check and presenting valid government-issued identification. Per federal requirements, acceptable ID must be REAL ID-compliant or an approved form of federal identification, such as a valid U.S. passport.

Job Description Construction Project Management Why Berks Construction? 5 REASONS WHY TO CONTACT US ABOUT THIS OPPORTUNITY. ABOUT US: Berks Construction Group is a National General Contractor who focusses on the following business sectors: Retail, Big Box Retail, Restaurants, Medical Offices, Fitness, Health and Wellness, Dental, Urgent Care Facilities etc. We perform Fit Outs/Retrofits Ground Up construction. The ideal candidate will be energetic, have an entrepreneurial spirit and a strong desire to work with a high-performance team. Have a positive attitude with the energy to fulfill all job responsibilities with integrity and excellence. Must possess a strong work ethic. Qualifications Experience: • 10+ years’ experience in Commercial Project Management of Ground Up and Fit-out, • projects, • Ability to quickly read and understand blueprints/plans., • Must Have very Strong Computer and software skills and be very fluent in the following, • Microsoft software: Procore, Word, Excel, Project, Teams, Share Point, Outlook etc., • Fluent in Microsoft Excel is a must!, • Procore Experience a plus, but we will train., • Ability to manage multiple projects simultaneously while maintaining, 1. budget, 2., • Schedule, 3. Quality, 4. Safety while all along following company processes, policies and procedures., • Work with a high volume of work within tight deadlines and thrive under pressure., • Strong organizational and interpersonal skills., • Attention to detail., • Consistently meets deadlines., • Excellent written and verbal communication skills., • Extensive experience maintaining project budgets and schedules., • Ability to communicate RFIs effectively and manage a RFI log and report to management delays in answering, change order requirements and project delays., • Ability to create and send submittals for approval, manage a Submittal log and report to management any delays in approval or denials that are important., • Ability to manage the purchase log to ensure that all Owner, GC and subcontractor materials and equipment arrive on the project by the required date to ensure an on-time completion., • Chair all project meetings., • Manage 3-4 projects at a time with supervisors on each project., • Meet or exceed project objectives as determined in the pre-job planning process., • Weekly reporting on all facets of the project submit and manage the following: RFIs/Log, Submittals/Log, Sub-Client Change, • Orders/Log, Shop Drawings/Log, maintenance manuals, as-built drawings, punch lists., • Take an active role in and guide jobs and job teams in each phase including pre-construction, construction, closeout, and post-construction services., • Take a big picture view of strategy, risk assessment, and profitability and continuously communicate this view throughout the life of the project., • Identify and focus on critical issues related to construct ability including associated costs and logistical issues. Ensure timely and accurate completion of all Berks Construction financial processes, controls, and reports, i.e., internal budgets, costs to complete, billings, collections, subcontractor payments, change order preparation and resolution, contracts, etc., • Ensure that jobs are completed according to schedule and meet profit goals. Oversee the change order process to ensure the extras presented to the owner get approved and are fair., • Assist with new project transitions and pre-job planning., • Provide accurate percent complete status on projects to accounting each month., • Conduct a thorough analysis of job costs vs. budget., • Visit project sites for troubleshooting and for the purposes of ensuring project quality. Site visits to be at least once a week., • Oversee project security and safety., • Prepare project AIA Billing requisitions., • Review all purchase orders, delivery tickets, subcontractor requisitions, and invoices to see that they are coded correctly for project costing., • Coordinate with purchasing the requisition of materials and furnish information for, • Competitive salary, • Discretionary Job and Yearly Bonuses, • Paid Vacation, Holiday, and Personal Days, • Health, Dental and Vision Insurance available for employees and family, • Employer paid Life Insurance., • Short Term Disability Insurance Available, • 401K with company match, • Opportunities for advancement and growth, • Training opportunities, • Laptop with a Hotspot, • Vehicle Allowance