Welder jobs in Peoria, ArizonaCreate job alerts

Job Description Fitter/Welder A Responsible for utilizing safe practices, personal protective equipment (PPE), and procedural requirements while interpreting weld procedure specifications and engineered drawings. Your primary focus will be to tack and weld structural components such as beams, columns, joists, frames, stairs, and railings, all in accordance with Southwest Steel processes and procedures. Alignment with our company’s Vision & Values, Safety, and Quality policies is essential to maintaining a successful and efficient work environment. Responsibilities • Safety & Compliance: Identify, prevent, and correct potential safety hazards in accordance with, • Southwest Steel Policies and Procedures., • Always maintain a clean and safe work area., • Material Preparation: Identify and prepare materials for welding based on SWS Quality Management, • System (QMS) specifications and engineered drawings. Utilize appropriate tools and measuring devices for accuracy., • Welding Operations: Perform welding on components and assemblies using GMAW, FCAW, and GTAW* processes, following Southwest Steel weld procedure specifications., • Cutting & Shaping: Use equipment such as chop saws, band saws, and oxy/fuel torches to cut workpieces., • Heat, form, and dress metal parts using hand tools, torches, or arc welding equipment., • Quality Assurance: Achieve a pass rate of 98% or higher for all CJP (Complete Joint Penetration) and PJP (Partial Joint Penetration) weldments., • Material Handling: Move and position structural components using chain rigging, overhead cranes, jib cranes, and other material handling equipment., • Inspection & Alignment: Inspect equipment and structural components to ensure alignment with Southwest Steel processes and procedures • Additional Duties: Perform other duties as required that may fall outside the normal scope of work. Requirements • Certification: Ability to pass 3G FCAW, 2G FCAW and 2F D1.3 GMAW weld tests. (*4G D1.1 FCAW; 3F D1.6 FCAW;4F D1.6 FCAW; 3G D1.6 GTAW; 2F GTAW), • Expertise: In depth knowledge of oxy/fuel operations, welding processes, shop machinery, and repair procedures for welding discontinuities., • Fitting/Welding Skills and Quality Control: Ability to identify weld discontinuities and apply basic repair procedures to ensure high-quality welds. Expert-level knowledge of welding techniques to meet industry standards and project specifications., • Technical Skills: Proficient in interpreting blueprints, tolerances for gaps, holes, distortion control, camber, sweep, connections, splices, and cord length. Ability to identify weld discontinuities and in-depth knowledge of repair processes. In depth knowledge of weld procedure specifications and weld symbols., • Equipment Operation: In depth knowledge and ability to safely operate overhead cranes and jib cranes., • Tooling: Possess all necessary tools to effectively perform fitting, welding and fabrication tasks., • Work Ethic: Ability to multi-task, demonstrate punctuality, and maintain a strong work ethic in a team environment., • Listed skills are required for further advancement within this job classification. EEO: SME Industries, Inc. is an Equal Opportunity (EEO) Employer. All qualified applicants will receive consideration without regard to race, color, national origin, sex, sexual orientation, gender identity, religion, age, status as a protected veteran, status as an individual with disability, or any other protected group status or non-job-related characteristic as directed by law. Company DescriptionFounded in 1992 by Jerry and Craig Moyes. Southwest Steel is a division of SME Industries. SME Industries serves a diverse range of sectors including commercial, industrial, healthcare, and more. With five plants across the Western U.S. Companies within the SME family specialize in miscellaneous metal and custom steel finishing, the most-trusted and industry standard seismic bracing and both seismic-controlled and wind-controlled moment frame connections, and logistics. Today, SME continues the legacy established by our founders. We execute the projects that are too challenging or too big for others and we do so with a focus on safety and quality for our partners and team members. At SME Steel, we’re built on hard work, skill, and pride. We don’t just build steel — we build careers you can count on. As a leader in structural steel fabrication and erection, we provide a safe, team-driven workplace where craftsmanship and accountability matter. With steady work, modern equipment, and opportunities to grow, SME Steel is a place where your skills make a real impact. Our people take pride in knowing the steel they build stands strong in projects that define skylines and communities.Founded in 1992 by Jerry and Craig Moyes.\r\n\r\nSouthwest Steel is a division of SME Industries. SME Industries serves a diverse range of sectors including commercial, industrial, healthcare, and more. With five plants across the Western U.S. Companies within the SME family specialize in miscellaneous metal and custom steel finishing, the most-trusted and industry standard seismic bracing and both seismic-controlled and wind-controlled moment frame connections, and logistics.\r\n\r\nToday, SME continues the legacy established by our founders. We execute the projects that are too challenging or too big for others and we do so with a focus on safety and quality for our partners and team members.\r\nAt SME Steel, we’re built on hard work, skill, and pride. We don’t just build steel — we build careers you can count on. As a leader in structural steel fabrication and erection, we provide a safe, team-driven workplace where craftsmanship and accountability matter. With steady work, modern equipment, and opportunities to grow, SME Steel is a place where your skills make a real impact. Our people take pride in knowing the steel they build stands strong in projects that define skylines and communities.

Job Description Overview: Now Hiring Welders – 2nd Shift | El Mirage, AZŌnin Staffing is hiring experienced Welders for both 1st and 2nd shift at a well-established structural steel manufacturing facility in El Mirage, AZ. If you have a strong background in structural welding and fabrication, this is a great opportunity to put your skills to work and grow with a company that values your expertise. • Location: El Mirage, AZ, • Shifts Available:, • 2nd Shift: 3:00 PM – 2:00 AM (includes shift differential pay), • Pay: $22-24 based on experience Skills and Experience: Key Responsibilities • Perform high-quality MIG welding (GMAW) on structural steel components., • Read and interpret blueprints and welding symbols accurately., • Use fabrication techniques to meet production standards and project specs., • Inspect welds and materials to ensure adherence to quality control requirements., • Collaborate with team members to maintain a safe, efficient work environment. Qualifications • Prior experience in structural steel fabrication., • Proficient in GMAW (MIG) welding., • Knowledge of fabrication techniques and tools., • Strong background in quality control and inspection procedures., • Ability to lift up to 50 lbs and work in a physically demanding environment., • Must pass a weld test., • Reliable transportation and consistent attendance required. Benefits: Don't miss this chance to enhance your experience in a production environment while enjoying competitive pay and a comprehensive benefits package. • Weekly pay, • $5 prescription drugs, • $5 doctor's visit copays, • Free teledoctor service, • Free counseling services, • Life insurance included, • Vision insurance included, • Dental insurance included, • Vacation and holiday pay, • Scholarship Opportunities, • 401(k) retirement plan, • Free legal services, • Our unbeatable employee discount programApply now so we can hold a spot for you. We can’t wait to talk to you! ––Your Ōnin team

Job DescriptionIron and steel company looking for a full-time Welder. We make wrought iron gates, railings, stairs, fences, and other items for the residential building industry. This is not a structural steel welding job. Job Details: • Must be able to pass a drug test., • Weld test prior to employment. Please respond to this ad with your resume and/or experience and contact information. We accept applications Tuesday thru Thursday, 9am-2pm at 10227 N El Mirage Rd El Mirage AZ 85335. Work is M-F, 5 am start time.

Job Description Interstate Assembly Systems is looking for experienced Welders and/or Fabricators at our Surprise Arizona location. This interesting and varied position consists of fabrication and assembly of pre-cut steel or aluminum large and small components to complete a finished product. This will include grinding and possibly wiring. Safety and cleanliness are a major part of the work. Sometimes working independently, other times as part of a team, the Welder is an important role for Assembly Systems. Job Duties: • Most work is wire feed carbon steel horizontal welding, some vertical welds required, • Handling material including moving steel or aluminum onto fixtures and jigs, • Fabrication according to print, with willingness and ability to ask for clarification whenever there are questions to ensure a product which meets customer expectations, • Adhere to all administrative policies and practices including logging time spent on a job and keeping files up to date, • Other duties as assigned Required Skills and Experience: • Must be able to perform physical work, • High school degree or G.E.D., • Ability to use and understand basic tools such as tape measure, prints/drawings, • Positive attitude, • Punctuality, • Willing and able to learn Preferred Skills and Experience: • Welding experience, • Wiring experience, • Experience with and ability to understand drawings and prints, diagrams, etc., • Experience with material handling equipment including skid steer, forklift, etc. Employee Benefits: • Competitive Wages – Be paid your worth!, • Uniforms - fully supplied by Interstate including cleaning!, • Tool program - available, • Tuition assistance - for educational and ongoing career growth, • Health, dental and vision coverage - begins on the first day of the following month., • Paid Time Off - (PTO) starts accruing day one of your full-time employment., • Holidays - 6 Holidays and 2 Floating Holidays per year, • 401(K) - with company matching., • Long Term Disability - Supplied, • Short Term Disability - Supplied, • Life Insurance - Supplied, • Healthiest You - Virtual Health Care paid by Interstate., • PPE Reimbursement- Safety Glasses and Safety Boot Reimbursement, • Pet Insurance – We care about our furry friends!, • Employee Discounts - available on products and services, • Paid Employee Assistance Program - Free 24/7 Access to a guidance consultant regarding life challenges you or family member may face., • Paid Health and Well-being screening - for employees and their spouse Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Interstate Companies is an Equal Opportunity Employer, and we encourage all qualified and interested persons to apply for this position by submitting a resume for consideration.

Job DescriptionQLM is seeking experienced 2G, 3G, and 4G Welders to join our fabrication team in Glendale, Arizona. If you can weld vertical and overhead without breaking a sweat, we want to talk to you. Responsibilities: • Perform 2G (horizontal), 3G (vertical), and 4G (overhead) welds on carbon steel, • Read and interpret blueprints and weld symbols, • Fabricate and assemble tank components to specification, • Maintain weld quality and production standards, • Follow all shop safety protocols Qualifications • Proven experience welding in 2G, 3G, and 4G positions, • 6G CERTIFIED FOR HIGHER END OF PAY SCALE, • Ability to pass an on-site weld test, • Experience with MIG, Flux Core, and/or Stick welding, • Ability to read blueprints and use measuring tools accurately, • Strong attention to detail and commitment to safety, • Reliable transportation to Glendale, AZ Quality Labor Management (QLM) provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, transgender status or sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state, and local laws. The Company complies with applicable Federal state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job DescriptionWho We Are At All Things Metal Industries, we don’t just build steel—we build people, relationships, and lasting careers. We’re proud to be a family-owned company that’s been recognized multiple times as one of Arizona’s Best Places to Work, and we take that seriously. Our culture is fast-paced and driven, but also supportive and humble. We value teammates who are hungry to learn, smart in how they work, and humble enough to grow with others. This isn’t a place for short-term gigs—you’ll find steady work, opportunities to advance, and a team that truly has your back. Whether it’s in the shop, the field, or the office, we believe in promoting from within, investing in our people, and helping each other reach the next level. If you’re looking for a long-term home where hard work meets big opportunity, All Things Metal is the place to be. ATM Steel ATM Steel, formerly All Things Metal, is our structural steel fabrication and erection team. We focus on large-scale projects in the Phoenix area, bringing experience, capacity, and precision to every job. Our name reflects the size and scale of our work while staying true to the iron-strong relationships we’ve built over 22 years. Role Overview At All Things Metal, our Fitter/Welders are at the heart of what we do. In this role, you’ll work hands-on in our fabrication shop, fitting and welding structural steel that becomes part of projects across Arizona. Every day brings something new! From interpreting shop drawings and laying out materials, to running clean welds and ensuring the final product meets the highest quality standards. This is not a short-term project hire — it’s a steady, full-time opportunity with room to grow. You’ll have consistent hours, supportive teammates, and the chance to sharpen your skills while contributing to work you can be proud of. If you’re someone who enjoys problem-solving, working with your hands, and seeing projects come to life, this is the place for you. Key Responsibilities • Layout and fit-up steel components per shop drawings, • Set up and adjust welding machines/wire feeders for accurate welds, • Perform welds per AWS D1.1 standards (clean, consistent, and defect-free), • Verify fit-up of full penetration welds meets drawings, codes, and quality control requirements, • Grind, clean, and bevel steel as needed for weld preparation, • Remove slag, splatter, and defects to maintain clean finishes, • Maintain and properly store equipment during and after use, • Read and interpret shop drawings accurately, • Complete assigned fabrication tasks safely and efficientlyAdvantages but not required, • MIG Welding with solid core gas-shielded wire (Light welding of railings/misc. steel), • Ability to weld mild steel over 1-1/2' thickness Qualifications • 3–5 years of experience in structural steel fitting, layout, and welding (Flux Cored Arc Welding required), • Ability to read and interpret shop drawings and plans, • Must pass an in-shop layout/fit-up test (bring hood, gloves, and jacket), • Valid identification (background and drug screening required), • OSHA 10 or OSHA 30 certification a plus, • Professional working proficiency in English required, • MIG welding with solid-core gas-shielded wire (preferred), • Experience welding mild steel over 1.5' thick (preferred) Skills & Abilities • Strong attention to detail and commitment to quality, • Safety-oriented mindset, • Team player with a positive, motivated attitude, • Punctual, dependable, and accountable, • Physically capable of lifting 50+ lbs,, • Stoop, kneel, crawl, lay, bend, squat, stand and walk for long periods of time, • Work outdoors in all weather conditions Schedule Monday - Friday 5 am - 3 pm with a 1 hour unpaid lunch Occasional half days on Friday (depending on need and department) Compensation & Benefits • $20+/hourly depending on experience, with opportunity for advancement after the first 90 days, • Steady, long-term work in a supportive environment, • First-time homebuyer program with $500 bonus and optional realtor/mortgage support, • Dave Ramsey SmartDollar financial education resources, • Full benefits including medical, dental, vision, PTO, and sick time, • 401(k) with company match and profit-sharing contributions, • Family-friendly events and team-building activities, • Birthday and work anniversary recognition, • Cash bonuses for production roles and internal growth opportunities#priority

Aerotek - - Responsibilities: Weld stainless pipe (Schedule 10–160); Perform 6G pipe welding (open root); Read and follow blueprints and weld symbols; Prep pipe (bevel, fit-up, purge); Maintain weld quality and follow safety procedures.

PPS is seeking an experienced and talented Welder Level III to join our state-of-the-art semiconductor industry fabrication facility in Phoenix AZ!. The Welder III will be responsible for MIG and TIG welding on a diverse array of products and held to tight tolerances on large and small weldments per

Chromalloy - 5161 West Polk Street - Responsibilities: Prepare weld joints according to traveler instructions; Perform welding using manual TIG, CNC TIG, and/or EB welding equipment; Inspect tools and equipment before use; Keep your work area clean and organized; Follow all company quality, safety,

Midway Staffing - 506 E Western Ave - Responsibilities: Perform MIG, TIG, Flux Core, and Stick welding on a variety of materials; Read and follow blueprints, work orders, and welding specifications; Operate welding equipment safely while maintaining quality standards; Assist with moving materials us

Waste Connections - - Responsibilities: Perform repairs and inspections on containers and dumpsters; Conduct safety checks and diagnose/repair equipment; Assist team members with repairs; Maintain a clean and safe work area in compliance with OSHA standards; Interact professionally with drivers.

United Rentals - - Responsibilities: Lay out and apply the appropriate weld type per specifications; Inspect, repair and paint rental equipment to ensure it is rental ready and safe; Perform non-structural repairs or modifications to rental equipment as specified; Provide welding support on job sit

Aerotek - - Responsibilities: Weld large steel tanks using flux core dual shield processes per blueprints; Inspect welds for quality and adherence to specifications; Read and interpret detailed blueprints for welding and fabrication; Perform fabrication tasks such as fitting and preparing materials

Nesco Resource - - Responsibilities: Weld piping systems up to 48 inches diameter using SMAW and FCAW; Prepare, cut, bevel, and assemble pipe components using CNC pipe cutters and tube benders; Read and interpret structural and piping blueprints; Ensure all work meets quality, safety, and code spec

Aerotek - - Responsibilities: Perform TIG (GTAW) welding on stainless steel pipe; Execute butt welding of stainless steel pipe; Perform 6G pipe welding in various positions; Back purge techniques using inert gas to protect root side welds; Read and interpret technical drawings and welding symbols.

Nesco Resource - - Responsibilities: Perform weld preparation, welding and finishing per drawings; Interpret weld symbols on mechanical drawings; Conduct process inspection and maintain documentation/certification; Maintain welding equipment; Assist area supervisor as needed.

Advance Services Inc - - Responsibilities: Weld precise TIG joints to blueprint specifications for fabrication projects.

Nesco Resource - - Responsibilities: Weld on storage tanks, pressure vessels, and refinery equipment; Follow API standards (API 650, API 653) and welding procedures (WPS); Read blueprints and welding symbols; Ensure weld quality meets inspection and safety standards.

Aerotek - - Responsibilities: TIG weld stainless pipe (Schedule 10–160); Read blueprints and weld symbols; Prep pipe (bevel, fit-up, purge); Maintain weld quality and follow safety procedures.

Shift: Monday-Friday- 3pm-11:30pm.ESSENTIAL DUTIES AND RESPONSIBILITIES:.Assemble panel components using hand tools and power tools, such as drills, impact drivers, and grinders to assist in the assembly process.Follow detailed assembly instructions and diagrams to accurately construct frames.Conduc

We are seeking a reliable and hardworking Material Handler I to join our warehouse operations this entry-level role youll play an essential part in keeping our pallet manufacturing facility running smoothly by handling a variety of warehouse tasks including moving materials organizing stock and mai

Shift- Monday- Friday- 5am-3pm.ESSENTIAL DUTIES AND RESPONSIBILITIES:.Perform assembly tasks for window components using hand tools and power tools such as drills, impact drivers, grinders and banding machines.Follow assembly instructions and diagrams to accurately construct windows.Conduct quality

HVAC construction projects are often in the industrial and manufacturing environments such as manufacturing facilities automotive plants chemical plants distribution centers warehouses and other large commercial facilities.We are a self-performing specialty contractor specializing in design-build a

We are seeking a skilled dependable and service-oriented.Completing service requests and maintenance work orders in a timely professional and courteous manner.Diagnosing and repairing issues related to plumbing electrical HVAC appliances carpentry drywall painting and other building systems.Performi

As a 100% employee-owned contractor when you work at Sundt youre not just hiring on at a company youre joining a culture.Because everyone at Sundt is part owner youll join a team of people who are deeply invested in their work.From apprentices to managers were passionate about the details and delibe

As a skilled Forklift Operator and Forklift Driver you will be essential to our warehouse operations responsible for the safe and efficient movement of pallets and materials.You will primarily focus on loading and unloading trailers organizing inventory and ensuring all movements are accurately docu

We are looking for hard-working reliable and safety minded individuals to join our team as a Material Handler.As a Material Handler you will be responsible for the safe and efficient operations of a hydraulic grapple or magnetic crane to load and unload containers and trailers and lift and move scra

Clean Harbors in Phoenix Arizona.This is a great opportunity for college students or recent high school grads wantingto gain some work experience.Health and Safety is our #1 priority and we live it 3-6-5!.Comprehensive health benefits coverage after 30 days of full-time employment.Group 401K with co

Advance Services Inc - - Responsibilities: Pack, label, and ship orders; Handle materials up to 50 pounds; Work with tools to prepare shipments; Maintain organized workflow.

Novolex - - Responsibilities: Check incoming deliveries to make sure all ordered materials meets quality standards; Load and unload packages; Organize stock in the most efficient way using forklifts, pallets, etc.Receive and check incoming pick tickets; Pull material to fulfil orders properly.

PrideStaff - - Responsibilities: Operate overhead crane system to handle steel beams, plates and assemblies; Drive forklift and tractor; Load and unload trucks and rail cars; Perform yard and building cleaning tasks and assist in maintenance of building and equipment; Handle and move small pieces o

Pactiv Evergreen - - Responsibilities: Check incoming deliveries to make sure all ordered materials meets quality standards; Load and unload packages; Organize stock in the most efficient way using forklifts, pallets, etc.Receive and check incoming pick tickets; Pull material to fulfil orders prope

PrideStaff - - Responsibilities: Operate overhead crane system to move steel beams, plates, and assemblies; Handle and move steel pieces and shop equipment weighing 10 to 50 pounds; Drive forklift and tractor; Load and unload trucks and rail cars using above equipment; Perform yard and building cle

Aerotek - - Responsibilities: Operate forklifts, overhead cranes, and other machinery to transport materials; Collaborate with welding and machine operating teams to ensure workflow; Load, unload, and organize materials in indoor production bay and outdoors; Maintain open communication on task prog

Nesco Resource - - Responsibilities: Load, unload, and transport raw materials and finished products; Move and stage steel, piping, and fabricated components; Supply production areas including welding, cutting, and fabrication; Operate forklifts and overhead cranes; Verify incoming shipments and or

This job is in the Plant family (Department), which includes positions responsible for performing work of metals processing and distribution work within the Reliance family of companies.Work includes specialized equipment operation and/or supporting functions and requires a practical knowledge of th

Nesco Resource - - Responsibilities: Operate Overhead Crane Systems: Handle steel beams, plates, and assemblies safely and efficiently; Move and position steel and shop equipment weighing between 10 to 50 pounds; Assist with cleaning and painting steel, handling paint and solvents; Drive forklifts

Forklift Operator QF - 3rd Shift.Quietflex Manufacturing, a member of Daikin Industries LTD.Quietflex Manufacturing is the leading manufacturer and supplier of flexible ductwork for residential and commercial HVAC systems, as well as fiberglass mats for industrial applications.As a vital component o

Abacus Corporation - 6544 W Thomas Rd - Responsibilities: Hand build products for bulk and route trucks; Cut pallet plastic open to replenish the line with more product; Make cases by grabbing 6 bottles and filling boxes; Requires repetitive lifting of 35-50lbs per case during work shift; Must be ab

Logistics Specialist (Material Handler/Delivery Driver).At TireHub we move more than tires we move businesses forward, support communities, and help keep America rolling.We call them Hubbers because they're at the center of everything we do.From behind the wheel to the warehouse floor, from custom

Provide leadership, management, and supervision necessary for the planning, layout, and performance of all types of pipe fitting and fabrication work in accordance with all applicable plans, specifications, codes, and industry standards.Plan and coordinate the efforts of all craft persons under supe

As a Pipefitter (Levels IIV), you'll play a critical role in commercial mechanical service and installation, progressing from entry-level assistance to master-level expertise in wet-side piping systems (hydronic heating, chilled water, steam, boilers, chillers, process piping) for buildings, hospita

Plan, lay-out and perform all types of pipe fitting and fabrication work in accordance with all applicable plans, specifications, codes, and industry standards.Work in other crafts at levels appropriate to training and skills as requested by project supervision.Must have the ability to take directio

Requisition Number: PIPEF001358.Essential Duties and Responsibilities.Responsible for daily Pre-Task Planning of work performed.Layout, fabricate, assemble, and install piping systems.Read, understand, and install all blueprints, isometric drawings, and construction plans for pipe systems, supports,

Lead Material Handling Equipment Operator.Our supply chain team is dedicated to meeting our customers' needs both now and in the future.By pairing innovative technology with dynamic employees, we create smarter, more efficient ways to meet our customers' needs faster.Our network of distribution, ful

Location: Peoria, AZ 85086, USA.Responsible for daily Pre-Task Planning of work performed in the field.Assist journeyman pipefitters or peers with the demolition, de-installation, rigging, fitting, and/or installation of equipment, supports, and pipe on site.Communicate clearly verbally, digitally,

As a Pipefitter III, you'll operate as a journeyman-level expert in commercial mechanical service and installation, independently handling complex piping tasks for wet-side HVAC systems (hydronic heating, chilled water, steam, boilers, chillers, process piping) in buildings, hospitals, schools, and

As a Pipefitter III, you'll operate as a journeyman-level expert in commercial mechanical service and installation, independently handling complex piping tasks for wet-side HVAC systems (hydronic heating, chilled water, steam, boilers, chillers, process piping) in buildings, hospitals, schools, and