Trabajos order management en OxfordCrear alertas

Salary; £75,000 - £80,000 We are looking to appointment two candidates for this role, for both the South and Midlands region. This role is a remote role with regular visits across our sites in the South/Midlands. Those huge small victories We are the highest Ofsted-rated provider in the country for special education and care. Our teams are fulfilled by the idea of making even the smallest positive changes in our young people, so we celebrate the little things. For children with complex needs the level of care and education we provide must go above and beyond. That’s what drives us here at Witherslack Group. With our high staff-to-child ratio and in-house clinical teams, we’re proud to have won a reputation for excellence and market leading OFSTED ratings. Get out what you put in As a Quality Assurance and Standards Lead you will be responsible for checking the quality of education within our schools and ensuring they meet all the Independent School Standards consistently. This role is a champion in order to achieve our promise to provide the highest standards of education, which will support Witherslack Group schools to secure the best possible outcomes and life opportunities for pupils. In this role you will undertake reviews of all WG schools and provide detailed reports and next steps for further development. Your previous skills will allow you to carefully consider schools performance and assess how well they can demonstrate their provision. Knowledge of Independent School Standards will enable you to complete deep dives of subjects or other remits in order to provide feedback to senior leaders and next steps. Bring your whole self to work Here at Witherslack Group, we celebrate everyone’s differences as that’s what makes us the best at what we do. Our young people come from all walks of life, diverse backgrounds and with different needs – and our workforce reflects that diversity, so that our teams can engage, encourage and inspire our young people to be themselves. We’ll give you the chance to build an exciting career in a fast-growing organisation, where you’re free to achieve your potential. To apply for this role we need; * Teaching & learning (qualified teacher with 5 years teaching experience) * 2 years’ successful and substantial management experience as a Head Teacher * Currently an Ofsted inspector or prepared to apply to undertake inspection training and school inspections * Good understanding of school evaluation procedures and setting of priorities * Experience of evaluating against the independent school standards * Excellent written skills * Good communication and interpersonal skills. * Experience of working with children and young people SEMH, ASC, communication difficulties What We Do For You We know you’re going to do great things. For your hard work and commitment, we reward you with: Salary: £75,000-£80,000 Hybrid/Remote working: you’ll be based from home but spend time at sites in the South of England or Midlands (depending on candidate location) Holiday: You’ll work hard at WG, so you’ll be rewarded with 35 days holiday (inc bank holidays) Flexible benefits package: meaning you can increase/decrease your holiday allowance, pension and life insurance Wellbeing: a host of wellbeing tools and advice including employee assistance Some extra bits and bobs to show how much we care: Medical cover so you can claim back the cost of things like an opticians or dentist appointment, plus employee awards, sick pay as well as a host of high-street discounts. Join the UK’s best special education and care provider Our young people deserve the best possible future and we feel the same about our teams. You deserve to have the career you want, with a purpose-led employer, in an environment that allows you to be yourself. For a full job description and person specification, please click ___ To view our ex-offenders policy please click ___ The Witherslack Group is committed to safeguarding and promoting the welfare of its young people. This post is subject to a DBS check and online search. We are an equal opportunities employer welcoming applications from all sections of the community. #INDH

We are seeking a proactive and experienced Facilities Manager to oversee and manage all building-related activities in our clients UK offices. The successful candidate will ensure our facilities are safe, functional, and efficient, while delivering a high standard of service to internal stakeholders. In addition will manage local FM team members at respective locations. JOB DESCRIPTION / PURPOSE: The Facility Manager is responsible for all FM operations, planned maintenance and reactive works at client Corporate Facilities throughout the UK, primarily outside of London eg (Oxford, Leeds, Cardiff, Nottingham, Southampton, East Grinstead, Exeter areas). The FM is responsible for the delivery of all services towards our client according to the Global Master Services Agreement (MSA), Service Level Agreements (SLA’s) and Key Performance Indicators (KPI’s). Responsible for hard and soft services and act as the key interface between the different business functions, departments and supply chain partners, providing guidance and support to ensure supply chain vendors carry out their obligations and responsibilities in a manner consistent with high-quality operational performance, financial control ensuring outstanding customer service to building occupiers at all times. ESSENTIAL DUTIES: • Manage the day-to-day operations of the site in accordance with contractual, client, and company objectives., • Ensure compliance with local health & safety legislation, environmental regulations, and internal company/client policies., • Act as the primary point of contact for subcontractors and suppliers during on-site work execution., • Assist in the development and tracking of 3rd party vendor agreements to ensure compliance with scope and language., • Supervise and coordinate supply chain vendors and specialist contractors, ensuring quality and compliance with SLAs., • Maintain accurate and up-to-date records of operations, compliance, and maintenance using employers or client’s systems not limited to space planning, environmental, etc., • Lead and execute planned preventative maintenance (PPM) programs and manage reactive maintenance requests and FM-related projects. Update records in CMMS system., • Conduct risk assessments and implement appropriate control measures according to the company’s operational “Ways of Working.”, • Drive continuous improvement initiatives to optimize both operational efficiency and financial performance., • Oversee site budget and cost control, liaising regularly with finance teams and preparing financial reports as needed., • Responsibility for the preparation of operating and capital budgets including quarterly reforecasts., • Review vendor invoices for accuracy and ensure alignment with purchase orders and budget commitments., may upload into accounting system., • Own and manage the Service Activation process, from initiation through to invoicing., • Actively participate in safety operations and inspections, ensuring well-being of staff, visitors, and contractors., • Support the Senior Facilities Manager in strategic planning, budgeting, and implementation of cost-saving initiatives., • Ensure effective complaint handling and timely resolution of service issues., • Maintain and update all management systems and compliance documentation., • Represent the facilities function in internal and external meetings, audits, and events as required., • Responsible for statutory compliance at the location scheduling, tracking and ensuring all compliance is completed., • Liaison with landlord to ensure lease language and, landlords’ scope is being properly delivered, not limited to review of any landlord issued work order invoicing., • Conduct meetings with client’s site lead or head of house to review support and facility needs to ensure client’s needs are properly supported. EDUCATION • BA Degree in a related field EXPERIENCE: • Solid experience in a FM role ideally within an international corporate environment SKILLS • Fluent English, • Strong Knowledge of local regulations, • Experience in FM software such as Tririga a plus, • Excellent interpersonal skills and vendor management skills, • Strong financial and budgeting skills, • Proactive, detail oriented and safety conscious WHAT WE OFFER: • Fast paced working environment, • Entrepreneurial and supportive team, • Competitive salary, • Discretionary Bonus

The Opportunity Are you a highly skilled and experienced professional with a passion for keeping things running smoothly? We're looking for a dynamic Hotel Maintenance Manager to lead our maintenance operations and ensure our hotel remains in top condition. What You'll Do: • Lead the Operations: Oversee daily maintenance activities, manage staff schedules, assign tasks, and ensure all work is completed on time and to the highest standard., • Prevent Problems: Develop and implement preventative maintenance programs to keep all equipment and facilities in excellent working order., • Optimize Energy: Manage the hotel's energy usage and implement energy-saving measures to enhance efficiency., • Ensure Safety: Carry out all maintenance work safely and in accordance with health and safety guidelines., • Build Relationships: Manage relationships with external contractors and suppliers, negotiate contracts, and ensure all work is completed to a high standard and within budget., • Control Costs: Manage the hotel's budget for maintenance and repair work, ensuring cost-effective solutions., • Inspect and Improve: Conduct regular inspections of the hotel's facilities and equipment, promptly addressing any maintenance issues., • Keep Records: Maintain accurate records of all maintenance work, including expenses, completed tasks, and parts used., • Report Progress: Provide detailed reports to senior management on the status of maintenance work and any issues that may arise. Ideal Candidate • Previous experience working in a maintenance management role in a hotel or similar environment., • Strong technical skills and a good understanding of building and facility systems., • Excellent communication and interpersonal skills., • Strong leadership and management skills., • A good understanding of health and safety guidelines and procedures., • The ability to work well as part of a team., • A flexible and adaptable approach to work, with the ability to work evenings and weekends if required.

I am supporting a leading medidcal equipment manufacturing company as they continue to expand their team. They are seeking a logistics warehouse coordinator to join a growing team and ongoing project, supporting cutting-edge life science projects. Location: Oxford, England (Onsite) Experience: 2-3 years working in a warehouse or storeroom. Start Date: ASAP. Role: 6 Month contract position with possibility for extension into permanent role subject to performance and role availability. About the Role The coordinator will receive goods from suppliers and other stock locations into the storeroom, transfer items using the stock transfer order (STO) process, maintain accurate inventory records in SAP across all warehouse locations and assist in cycle counts, investigate discrepancies, and support quarterly audit readiness. The role also includes picking and packing of items for dispatch and ensuring all goods are appropriately handled, labelled and stored in a safe manner. Requirements • 2-3 years’ experience working in a warehouse or storeroom., • Strong working knowledge of ERP systems – preferably SAP., • Excellent communication and time management., • High level of attention to detail., • IT literate with strong MS Office., • A-Levels or equivalent minimum. Responsibilities • Receiving goods from suppliers and other stock locations into the Store Room, • Picking and packing of items for dispatch, • Transferring the items using the Stock Transfer Order (STO) process, • Maintain accurate inventory records in SAP across all warehouse locations, • Assist in cycle counts, investigate discrepancies, and support quarterly audit readiness, • Ensure that all goods in the Store Room are appropriately handled, labelled, and stored in a safe manner.

Job Summary Oxford Nanopore Technologies (ONT) and its subsidiary Oxford Nanopore Diagnostics (OND) develop, manufacture, and sell products based on ONT’s unique and market leading nanopore-based next generation gene‑sequencing (NGS) technology. In addition to selling its technologies and products into research use only applications, the firm also markets IVD instruments (using the same highly complex, unique NGS technology). ONT also develops its own assays and reagents and directly collaborates with a wide range of third parties to support the development of assays by those parties. Design and manufacturing are based in Oxford but the firm’s products are marketed globally (into both RUO and IVD markets). Consequently, the firm’s IVD instruments and assays are subject to regulations in the territories in which they are sold and regulatory filings must be made to the relevant health care authorities. To ensure that products conform with relevant regulations in territories in which they are sold; OND and ONT operate two Quality Management Systems (ISO 13485‑OND & ISO 9001‑ONT). Key Responsibilities The postholder is responsible, alongside and as directed by the Head of QA, for leading and supporting the quality team, its functions and processes. This responsibility extends to the quality‑related activities of staff performing quality functions (e.g. in software release, manufacturing, design etc.). In addition, the post holder is responsible for ensuring that the QA team is suitably qualified, trained and experienced to undertake their duties competently – in this regard this role will be responsible for overseeing and directing development and training of the QA team and wider QA stakeholders in the firm. The post holder shall have the authority to review and approve all processes, documents and records. Duties Duties include, but are not limited to: • Performing the role of management representative for both ISO 9001 and ISO 13485 systems (as delegated by the Head of QA) and performing aspects of the Person Responsible for Regulatory Compliance (PRRC) per the EU IVDR (as delegated by the Head of QA)., • Acting as support and most senior deputy to the Head of QA, representing the Head of QA (as directed) in any matter., • Ensure the development, implementation and maintenance of ONT’s Quality Management System in compliance with the ISO 9001 standard., • Ensure the development, implementation and maintenance of OND’s Quality Management System in compliance with the ISO 13485 standard for IVD Medical Devices., • Accordingly, ensure that the development and competence of the QA team (and wider QA stakeholders) is maintained to an appropriate level., • Oversee and manage the development and maintenance of the ONT and OND quality systems to support the strategic, and day to day needs of the businesses., • Co‑ordinate the quality business processes in ONT and OND to maximise efficiency, particularly areas in common for the development, manufacture and distribution., • Perform and/or manage the processing and approval of Change Control, CAPA, Batch release and support post market surveillance as appropriate., • Perform and/or manage internal audits. Support and manage audits from external 3rd parties as required. Support supplier audit program as required., • Identify opportunities for the development and promulgation of quality awareness and quality concept/skills competence within the QA team and with quality stakeholders across the firm. Qualified lead auditor. Experience: A minimum of 10 years’ experience managing a full lifecycle quality management team in the IVD industry. This is a key requirement and is not negotiable. Experience of managing quality assurance compliance of IVD products against the IVDR while supporting RUO product lines is a must. Experience with and leading to demonstrable understanding of software assays, chemical assays, chemical reagents and library prep kits, biologics, and microfluidic handling systems (e.g. cartridges) as well as their packaging, manufacturing, labelling, design and development, risk management, process validation and change management is a must. QMS – experience of team management and leadership of teams >5, specifically experience of QA systems management, production QA management, design QA management, supplier and distributor QA management. Audits – experience of leading (from the manufacturer side) CE audits certification, surveillance and unannounced audits. QMS systems – experience of implementing (from scratch) and managing (through lifecycle) both electronic QMS and within adjacent electronics systems (e.g. for production, complaints, sales order processing/product realisation, design and development, software development etc.). Experience of and at least a basic understanding of computer systems validation is a must. QA activities – experience and consequent deep understanding of design/development (pre‑market) activities, production control (in both “single piece flow” and “batch/volume” production environments), and post‑market (lifecycle change management) areas. Experience with and demonstrable understanding of some of the following: GDP, GMP, GMLP, Good Distribution Practice, GAMP5, IEC 14971, IEC 62304, IEC 62366, GLP, packaging/transport standards, labelling standards and IVDR performance evaluation requirements. Knowledge / Skills / Abilities: Detailed working knowledge of ISO 13485 and the IVDR are essential. Demonstrable experience of working with external partners and stakeholders, showing a balanced level of discretion and sensitivity to both risk and commercial interests is strongly desired. Able to understand how technical standards are applied to aid the development of IVD and general professional products. Able to distil complex overlapping or interacting regulatory demands (regulations, guidance, standards) down to simple and direct courses of action for colleagues vital as is providing exemplar solutions to those colleagues and working with them to achieve success. Excellent interpersonal and organisational skills with ability to influence at a senior level. Able to form and maintain good relationships both internally and externally. Attitude / Other Requirements: Positive and flexible attitude and experience of fast paced and agile environments. Must be goal‑oriented and able to develop/evolve their own solutions. Highly effective communicator to non‑expert professional groups. Excellent written and spoken English. High level of attention to detail as well as an ability to prioritise based on risk. Desirable Experience: Experience of subcontracting large portions of the QMS responsibilities to a second or third party (e.g. manufacturing, complaints handling) is desirable. Experience with electronic devices, software devices (which may or may not include SaMD) is desirable. Experience of FDA inspections or leading MDSAP audits is strongly desired. Experience of management of (and consequent future prevention of) recalls or other challenging health authority interactions is highly desired. Understanding or experience of computer systems validation is desirable (e.g. GAMP5). Experience of quality management of field manufacturing (service) activities and experience of software production, configuration and distribution (either by direct or remote/cloud/OTA update) is desirable. Experience with supporting market entry into new markets (either regional or industry segment) and providing strategic planning/support accordingly is desirable. Knowledge / Skills / Abilities: Knowledge of MDSAP requirements is desirable. Attitude / Other Requirements: Positive and flexible attitude and experience of fast paced and agile environments. Must be goal‑oriented and able to develop/evolve their own solutions. Highly effective communicator to non‑expert professional groups. Excellent written and spoken English. \n#J-18808-Ljbffr

JMC Aviation are working with an MRO company based in Brize Norton, looking to recruit a new Aircraft Mechanic to join their team. This client is a specialist in the provision of heavy C & D maintenance checks, bridging checks and major modifications. They provide services to airlines, leasing companies and VIP customers worldwide from strategic locations and are supported by extensive in-house shop capabilities as well as materials and logistics services. The company’s culture of developing their staff is a key strategic pillar for the business as they continually invest in training programmes to support development and growth, ensuring that training is provided to exacting standards with a range of skills to enhance flexibility. This vacancy is available due to growth within the organisation. This is a Permanent Position based in Brize Norton 5/5/4 shift working 7-7 Salary and Benefits • Competitive Salary, • 20 days Annual Leave with additional, • Maternity, Paternity and Parental Leave, • Flexi/Time in Lieu Options, • Compassionate Leave, • Employee Assistance Programme, • Employee Sick Pay Scheme, • Healthcare Contribution, • 5% Employer Contribution to Pension Scheme, • 2x Life Assurance, • Employee Discounts/Travel Concessions The Role The role of the unlicensed Aircraft Engineer required to perform aircraft maintenance tasks in accordance with Technical Documentation & Company Procedures. Other Duties Involve • Carry out aircraft maintenance tasks as directed by their Hangar Foreman, SLE or LE, providing assistance to other staff (any trade) to ensure safe and effective working practices., • • Ensure you are booked to task and to advise Hangar Foreman if additional time is required to complete a task., • Carry out movement of heavy equipment, tooling and spares around the site. This may involve the use of forklift (training will be provided)., • Assist with aircraft cleaning., • Maintain a clean working environment around the aircraft and facilities., • Carry out servicing of aircraft toilets on aircraft in maintenance., • Contain any fuel and/or oil spillage., • Assist with aircraft manoeuvring requirements., • Ensure all waste products are separated and recycled as necessary., • Ensure the scissor lifts are on charge at the end of their shift and ensure battery servicing is carried out., • Ensure all AAGDS vehicles are clean and tidy and all fluid levels checked., • Address and report any safety concerns immediately., • Ensure that equipment is maintained in a serviceable, clean, tidy and safe condition, reporting any faulty equipment immediately using the correct channels., • Carry out additional team responsibilities or any other reasonable request from your Hangar Foreman, SLE, LE or Hangar Management Team., • To recommend to the SLE any improvements that may increase safety and/or efficiency., • Carry out any reasonable request to carry out offsite support e.g. AOG, Line., • Remain up to date with all Read & Sign notices. Health and Safety In order to be successful in this role the Aircraft Mechanic will need to demonstrate the following skills and attributes • Aircraft experience (or in a comparable industry) or recognised aircraft apprenticeship, • Has had Competency Assessment completed and is at a satisfactory level., • Ability to work effectively in a team., • Ability to work unsupervised when required to do so., • Good awareness of Aviation safety., • Good communication skills., • Able to operate a powerset (GPU) If you think this is the role for you and you have the necessary skills and attributes, please apply today or contact JMC Aviation for more details. Please note that due to the high level of applicants we will only be contacting shortlisted candidates regarding this role. For this opportunity JMC Aviation Ltd is acting as an employment agency.

Production Engineer! Wise Employment are looking for a Production Engineer to join a rapidly growing company based in Exeter! Where you will be working Monday to Thursday 07:30 – 16:30 and Fridays 07:30 – 14:00 This is a full time permanent position offering a salary between £35,000 - £45,000 a year along with some fantastic benefits such as: A Flexi-Time Policy, Electric Vehicle lease scheme or Cycle to Work Scheme, Employee Assistance Programme for a range of health, life and work issues, along with generous staff discount on their products. You will also have access to discounts for supermarkets, cinemas, gifts and a wide range of other items. They offer 6.4 weeks starting holiday that will rise with length of service. As a Production Engineer your Key Responsibilities will be: Identify, assess and implement production and process improvements Support lean ways of working to improve manufacturing efficiency and output Support new product introduction and change requests to ensure production-efficient and safe designs Work closely with Production, Quality and Engineering teams to improve processes Assist with operating instructions, reports and technical documentation Ensure compliance with health, safety, quality and environmental standards Too be successful you will need: HNC / HND (or equivalent) in an Engineering discipline Experience delivering manufacturing and process improvements in batch production Knowledge of sheet metal fabrication processes Quality experience including DFMEA / PFMEA Strong communication, organisation and problem-solving skills Project management experience and a collaborative approach Please note that this company does not offer Sponsorship. If you feel you have what it takes, then do not delay apply today! In order to achieve the higher salary bracket, you must meet all the requirements at interview stage. TPBN1_UKTJ