Trabajos overtime en AberdeenCrear alertas

Pump Engineer (HVAC / Maintenance)\n \n £38,000 - £45,000 + 25 Days Holiday + Progression + Training + Overtime + On-Call Allowance + Company Benefits\n \n Aberdeen, Scotland\n \n \nAre you a Pump Engineer or Mechanical/Electrical Engineer looking for a varied field-based role working on a wide range of commercial, industrial and domestic pumping systems?\n \n \nThis is an excellent opportunity to join an established pum...\n \n \n \n \n \n \n \n \n \n ZIPC1_UKTJ

CNC Machinist (Milling or Turning) \n £40,000 - £46,000 + Overtime OTE £62,000 + Days Based + Monday to Friday + Company Benefits \n Aberdeen \n Are you a CNC Machinist with programming experience looking for a role with great work life balance, in a well-established company offering a stable, long-term, days-based role, and the opportunity to greatly boost your earnings with plenty of optional overtime? \n In th... \n \n ZIPC1_UKTJ

COMPEX Electrical Testing and Fixed Wirer Tester\n Aberdeen/Elgin/Inverness | Up to £53,000 Basic dependent on experience + Car Allowance + pension + Overtime + Benefits \n Are you a qualified COMPEX Electrician, Industrial Electrician, or Electrical Engineer looking to step away from constant site installation work and move into a more autonomous, professional electrical testing and certification role?... \n \n ZIPC1_UKTJ

CNC Machinist (Programming) \n £40,000 - £46,000 + Overtime OTE £62,000 + Days Based + Monday to Friday + Company Benefits \n Aberdeen \n Are you a CNC Machinist with experience setting, operating, and programming milling machines or lathes looking to join a company offering training on the other, furthering your skills and abilities, while boosting your earnings with plenty of overtime? \n In this role you will ... \n \n ZIPC1_UKTJ

Workshop Mechanic (Rescue Boats) \n £36,500 - £38,000 + Extensive overtime + 33 days holiday + pension + Shore based in Workshop \n Aberdeen \n Are you a mechanic from a car, agricultural or HGV background looking for a land-based role to support maintaining the largest wholly UK-owned fleet engaged in the UK's offshore industry with their planned maintenance? \n Are you looking to work for a company that values ... \n \n ZIPC1_UKTJ

Junior Marine Electrician (On-Shore) Aberdeen (Local Patch) £35,000 - £40,000 (OTE £55,000) + Up Too 2x Overtime + Progression + Take Home Company Van + Pension Are you an Electrical Engineer that wants full training to become a Electrical Marine expert for one of the nation's leading Electrical Engineering company? Do you want to work alongside industry experts who will provide 1 on 1 training to springboard your career whilst being able to boost your earning up to £60,00 through optional overtime? This industry leading company offer a broad range of electrical services to the Military Marine Sector, Commercial and Passenger sector, no matter the size or OEM, with over 600 staff, turning over an astonishing £70 million has no plans to slow down their rapid expansion. This role would suit a motivated Electrical Engineer based in Aberdeen with a background of working on Industrial electrical systems. This role: Call out's, Fault Finding, Planned maintenance, Fixing and servicing marine electrical systems Monday - Thursday, 8:00 am- 4:30 pm - Friday 8:00 am - 3:30 pm Based in Aberdeen, occasional travel further afield Full training on Marine Electrical systems Optional overtime (boosted earning potential)The Person: Apprenticeship in Electrical Engineering Experience within the Marine Industry (Must Need) Full UK Driving licenseKeywords: Marine, Defence, Electrical, Field, Progression, On-Site Training, Industry Leader, Aberdeen, Junior, Training, 18th Edition Reference:27674 If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable cand

Welder / Fabricator (MIG or TIG) \n £40,000 - £46,000 + Overtime OTE £62,000 + Days Based + Monday to Friday + Company Benefits \n Aberdeen \n Are you a MIG or TIG Welder/Fabricator, looking to join a company offering training on the other, where you will have the ability to drastically increase your earning through overtime, while furthering your technical abilities learning under experienced professionals? \n I... \n \n ZIPC1_UKTJ

Are you a skilled Class 2 (Cat C) Driver searching for a reliable, long-term role? Do you enjoy being out on the road and making customers smile with every delivery? If you're ready to join a team that values your expertise, we’d love to hear from you! \n \n Here at GXO, we’re working together with B&Q and are looking for highly experienced Class 2 Driver to join our Store to Home team in Aberdeen (AB10 7AY). You’ll be working on a full-time, permanent basis, contracted to 40hrs per week. \n \n \n You’ll be working on a full-time, permanent basis, following a two-week rotating shift pattern: Week 1 – Monday to Friday / Week 2 – Tuesday to Saturday, with a start time at 07:00. The role is contracted to 40 hours per week. \n \n \n Pay, benefits and more: \n \n As a Class 2 Driver, you’ll receive: \n \n\n • An hourly rate of £15.95,that is an annual salary of £33,176.00\n, • Overtime pay of £23.93 per hour (when applicable, paid over 40hrs)\n, • On-going annual CPC training\n, • Holiday pay and Workplace pension\n, • B&Q store discount upon successful completion of probation period\n, • A 24/7 online GP service, life assurance and a fully comprehensive employee assistance programme\n, • Access to our MyBenefits platform offering a variety of high street discounts, cashback cards, a saving scheme and much more!\n, • Access to GXO University – home to a wealth of online training courses, meaning your development never ends!\n\n \n What you’ll do on a typical day: \n \n\n • Delivering products to customer premises (room of choice) on multidrop basis – an average of 16 drops per day off peak and 24 drop per day in peak season\n, • Maintain accurate driving/working time records using the Tachomaster system and manual entries to record all working hours as required by the WTD regulations\n, • Operate company vehicles in a safe, legal, and efficient manner\n, • Ensure all products are checked off the vehicle and the customer receive the correct products and delivery documentation\n, • Keep customers informed of their estimated time of delivery and where issues occur communicate with in a polite and courteous manner\n\n \n What you need to succeed at GXO: \n \n\n • Previous experience in multidrop, store deliveries preferable but not essential\n, • A full UK driving licence with category C Entitlement\n, • No more than 6 penalty points on your licence (no DD, DR, DG, BA, CD, AC, LC or TT endorsements)\n, • An up to date CPC and Digital Tachograph\n, • Excellent customer service skills, both written and verbal\n, • Willingness to undertake pre-employment Disclosure and Barring Service (DBS Check)\n, • Be prepared to commute to Croydon (CR0 4YA) for the required shift pattern\n\n #bqstore \n We engineer faster, smarter, leaner supply chains. \n GXO is a leading provider of cutting-edge supply chain solutions to the most successful companies in the world. We help our customers manage their goods most efficiently using our technology and services. Our greatest strength is our global team – energetic, innovative people of all experience levels and talents who make GXO a great place to work. GXO is an equal opportunity employer. We celebrate, support and thrive on diversity and are committed to creating an inclusive environment for all employees. We believe that diversity and inclusion in our business is critical to our success as a global company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool. We are an Armed Forces friendly organisation and Disability Confident Leader as part of the Disability Confident Scheme (GIS) and actively welcome applications from people with disabilities. \n \n The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All employees may be required to perform duties outside of their normal responsibilities from time to time, as needed. Review GXO's candidate privacy statement

Job Title: Manual Horizontal Borer Operator \n Location: Aberdeen \n Salary: £21.71 per hour \n \n My client based in Aberdeen are looking for a Manual Horizontal Borer Operator \n The Manual Horizontal Borer Operator will be required to carry out all aspects of machining work required on new products and client supplied equipment utilising machines, as detailed in route sheet instructions. \n \n Manual Horizontal Borer Operator Responsibilities \n \n\n • Machine Manufacture of products to controlled drawings and route sheet instructions\n, • Machine preparation of valves and equipment for welding\n, • Machine finishing of valves and equipment after welding and PWHT\n, • Maintaining traceability at all stages of production\n, • Maintenance of machines being operated\n, • Ensure good housekeeping is maintained in all areas. Specifically, area of machine being operated.\n, • In process inspections as required on any item being manufactured or re-worked.\n, • Carry out daily maintenance routines on machines\n, • Carry out any additional tasks within capabilities as directed by the workshop supervisor or management\n\n \n Manual Horizontal Borer Operator Requirements \n \n\n • Experience required within machining.\n, • Experience in operation of manual horizontal borer is preferred.\n, • Based within a commutable distance of Aberdeen.\n\n \n \n Manual Horizontal Borer Operator Salary & Benefits \n \n\n • £21.71 per hour, depending on experience; overtime is payable at x1.5, x2 on Sundays (40 hour week)\n, • Full-time position - Day shift 8am to 4:30pm with half hour lunch break.\n, • 8-hour shifts - Monday to Friday.\n, • Holiday package - 30 days (inclusive of 10 public holidays).\n, • Company pension scheme.\n\n Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. \n We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.

\n Electrician / Approved Electrician \n Salary: 40,000 basic salary \n Benefits: \n \n • Company Van\n, • Fuel Card (business use only)\n, • PPE and Workwear provided\n, • Overtime paid at time and a half\n, • Double time on Sundays\n, • On-call allowance: 10 standby payment plus 30 for every call-out attended\n, • One weekend in three on-call rota (expected to improve as additional staff join the team)\n \n We are seeking skilled and motivated Electricians / Approved Electricians to join a growing electrical team based in Aberdeen. Applications from candidates based in Angus, Dundee and Elgin are also welcome. \n The successful candidates will be responsible for delivering high-quality electrical installations, maintenance, and testing across commercial and industrial sites. This is an excellent opportunity to work on a variety of projects while developing your career within a supportive and safety-focused environment. \n \n \n Responsibilities include but are not limited to:\n \n \n \n • Carrying out electrical installations in accordance with BS7671 and current building regulations\n, • Performing inspection, testing, and certification of electrical systems\n, • Diagnosing and repairing faults efficiently and safely\n, • Supervising apprentices and junior electricians\n, • Maintaining accurate documentation and compliance records\n, • Liaising with clients and site managers to ensure smooth project delivery\n, • Carrying out regular PPM visits\n, • Reviewing engineers' reports and pricing remedial works accordingly, ensuring accuracy and profitability\n \n \n \n Key Skills, Qualifications and Experience Required:\n \n \n \n • SJIB Electrician / Approved Electrician status or equivalent\n, • 18th Edition Wiring Regulations\n, • ECS Gold Card\n, • C&G 2391 Inspection & Testing (preferred)\n, • Proven experience in commercial or industrial electrical work\n, • Strong understanding of health and safety practices\n, • Full UK driving licence\n, • EV experience desirable\n, • IPAF 3a & 3b desirable\n \n This version removes all company-specific branding and presents the role as a standalone vacancy advert while highlighting the salary and additional earnings potential. \n Blue Arrow is proud to be a Disability Confident Employer and is committed to helping find great work opportunities for great people. \n

Job Description Ongoing,full time work for Class 2 ADR Drivers £19.28 per hour - yearly pay increases Monday to Friday, 06.00 start time 48 hours per week Paid breaks Potential for overtime at weekends, with enhanced rates Flexible to work Saturday’s covering emergencies (one Saturday a month minimum) 34 Days Annual Leave About the job Delivering gas cylinders and bottles to a wide range of customers throughout the Central Belt Multi drop approximately 15-20 drops per day Manual handling of full and empty cylinders Adhering to strict Health & Safety operations as directed by the client.The right candidate Held your HGV/LGV Cat C licence for a minimum of 3 years [for insurance purposes] Drivers CPC and Digi Cards No more than 6 penalty points, minor offenses only ADR certification - Class 2 in packages Able to travel to Leith to provide cover when necessary – fuel/travel time will be paid for Happy to consent to DBS criminal record check prior to starting work. For more information, please apply online or contact Pertemps Blantyre Driving by sending in your CV to (url removed) or call Sharon on (phone number removed)

Electrician / Approved Electrician Salary: £40,000 basic salary Benefits: Company Van Fuel Card (business use only) PPE and Workwear provided Overtime paid at time and a half Double time on Sundays On-call allowance: £10 standby payment plus £30 for every call-out attended One weekend in three on-call rota (expected to improve as additional staff join the team) We are seeking skilled and motivated Electricians / Approved Electricians to join a growing electrical team based in Aberdeen . Applications from candidates based in Angus, Dundee and Elgin are also welcome. The successful candidates will be responsible for delivering high-quality electrical installations, maintenance, and testing across commercial and industrial sites. This is an excellent opportunity to work on a variety of projects while developing your career within a supportive and safety-focused environment. Responsibilities include but are not limited to: Carrying out electrical installations in accordance with BS7671 and current building regulations Performing inspection, testing, and certification of electrical systems Diagnosing and repairing faults efficiently and safely Supervising apprentices and junior electricians Maintaining accurate documentation and compliance records Liaising with clients and site managers to ensure smooth project delivery Carrying out regular PPM visits Reviewing engineers' reports and pricing remedial works accordingly, ensuring accuracy and profitability Key Skills, Qualifications and Experience Required: SJIB Electrician / Approved Electrician status or equivalent 18th Edition Wiring Regulations ECS Gold Card C&G 2391 Inspection & Testing (preferred) Proven experience in commercial or industrial electrical work Strong understanding of health and safety practices Full UK driving licence EV experience desirable IPAF 3a & 3b desirable This version removes all company-specific branding and presents the role as a standalone vacancy advert while highlighting the salary and additional earnings potential. Blue Arrow is proud to be a Disability Confident Employer and is committed to helping find great work opportunities for great people. TPBN1_UKTJ

Trainee HGV Driver HGV Training Network is one of the largest HGV & LGV training and recruitment companies in the country; we are currently working to fill numerous full-time trainee HGV driver vacancies across the UK. The Trainee HGV Driver role is subject to successful completion of the training course - details of costs & fees will be discussed at registration. Please note that this is a training course and fees apply. You will be fully trained before you start your new role by one of our excellent DSA accredited instructors - at one of our 50 + locations across the UK. “Train Now, Pay Later” options are also available. We take care of everything from your medical at the beginning, right through to your practical training and gaining your CPC (Certificate of Professional Competence). The course will cover: • Getting you through your provisional test and medical application • Theory test and software • Practical training and test at our closest site • CPC training • Placement support We work closely with some of the biggest blue-chip companies; including many well know organisations, agencies and high street brand names. Once you have acquired your license, we will put you forward for full time positions with Blue Arrow, who are one of the country's largest providers of HGV driving jobs. Perks include: Holiday pay, Uniform, sick pay and a Pension. Not to mention extremely rewarding overtime pay as well! With the current industry demands across the UK at an all-time high there is an estimated shortage of over 100,000 qualified drivers. This means that even as a newly qualified driver you will be in high demand. No experience is necessary 18 years old and above Hold a valid UK driver's licence For more information please fill out our short application form by clicking the "apply now" button and you will receive a call back within 24 hours. We look forward to speaking with you and supporting you in beginning your new career

CNC Turner (MOD/Formula 1) Farnborough £20 to £23 Per Hour + Days Based Role + 25 Days + Bank Holidays + Occasional Overtime Are you a CNC Turner or similar, with experience using Fanuc or Siemens controlled machines, looking for a day-based role at a specialist manufacturer who has seen recent investment in a variety of state-of-the-art machinery, who supply a variety of components into the MOD and Formula 1 sector? On offer is the chance to join a tight-knit and skillful team, who work with a variety of machinery ranging from 5-axis machines to brand new DMG Mori's, who work with a variety of big-name clients across the MOD, Naval, and Formula 1 sector. In this role you will be responsible for programming, setting up, and operating various CNC Lathes. You will be creating small batch, specialist, precision components, for some of the biggest name clients in the Formula 1 and MOD sectors. This role would suit a CNC Turner or similar, with experience using Fanuc or Siemens controlled machines, looking for a role in a small but specialist manufacturer, who manufacture a variety of precision components for big name clients across the MOD and Formula 1 sectors. The Role Programming, setting up, and operating CNC Lathes Manufacturing small batch, specialist components for the MOD and Formula 1 sectors Days based, Monday to Friday The Person CNC Turner or similar Looking for a role manufacturing small batch, specialist components Commutable distance to Farnborough BBBH28004EW Key Words: CNC, CNC Turner, Turning, Engineering, Engineer, Manufacturing, MOD, Naval, Formula 1, Days, Farnborough, Mytchett, Aldershot, Guildford, Camberley If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

Coded TIG & MMA Welders Hinkley Point C Potential Weekly Package £2,000+ | PAYE | Long Term Opportunities Location: Hinkley Point C, Bridgwater, Somerset Contract: Temporary PAYE Assignment Hours: Approximately 48 to 50 paid hours per week Shift Pattern: 10 days on, 4 days off The Opportunity MDE Group is recruiting experienced Coded TIG & MMA Welders for a major nuclear infrastructure project at Hinkley Point C. We are seeking skilled welders with experience in industrial pipework, carbon steel, stainless steel and structural welding. This opportunity offers competitive hourly rates, overtime, accommodation allowances for eligible workers and the potential for longer term employment on a major UK infrastructure project. Pay & Benefits Potential gross weekly package of £2,041 to £2,269 Day Shift: £29.34 per hour PAYE Night Shift: £35.94 per hour PAYE Overtime: £41.08 to £52.82 per hour Potential bonus of up to £2.94 per hour Accommodation allowance up to £373.73 per week, subject to eligibility Approximately 48 to 50 paid hours per week 10 days on, 4 days off Day and night shift opportunities Potential ongoing project requirements for 18 to 24 months, subject to demand Essential Requirements BS EN ISO 9606 Coded Welding Qualification Proven TIG and MMA welding experience Experience welding carbon steel, stainless steel, pipework or structural components Relevant welding qualification or apprenticeship with a minimum of 3 years' experience, OR a minimum of 5 years' relevant industry experience Ability to complete a competency based interview and practical welding assessments CCNSG Safety Passport required before starting Right to work in the UK Experience within nuclear, oil & gas, petrochemical, power generation, shipbuilding or heavy engineering environments would be advantageous. Recruitment Process Applicants will undergo qualification and experience checks, a competency based interview, relevant practical welding tests and site onboarding. TPBN1_UKTJ

\n Class 1 Driver \n Location: Aberdeen Shift: Monday - Friday, Days \n Do you have a UK Class 1 CE Licence? \n If "YES," we want to hear from you! \n About the Role \n As a Class 1 Driver, you will: \n \n • Use a curtain side or flatbed trailer to deliver and collect oil and gas equipment within the local area.\n, • Ensure goods are loaded and secured correctly to prevent shifting or damage. Use straps, nets, and other securing devices as needed.\n, • Perform comprehensive daily vehicle safety checks using your company phone to maintain top-notch vehicle safety and reliability.\n, • Stay in regular communication with the transport team to provide updates on your progress and ensure our customers' expectations are met.\n, • Participate in regular training sessions to stay ahead with the latest industry standards and best practices.\n \n Essential Skills and Qualifications \n \n • Must hold a UK Class 1 CE Licence.\n, • Current DCPC Card and Digital Tachograph Driver Card.\n, • ADR licence is preferred but not essential.\n, • Experience of flatbed trailers is preferred but not essential (full training provided).\n, • Passionate about providing excellent customer service.\n, • Ability to work to deadlines.\n, • Confident, polite, and a team player.\n, • Fit, flexible, hardworking, and self-motivated.\n \n Why Join ARR Craib Ltd? \n \n • Competitive Salary: 35,666k basic. Enhanced rates at weekend.\n, • Shift Hours: 07:00hrs-17:00hrs. Weekend work may be required as per operational requirements.\n, • Overtime: Enhanced rates for working weekends.\n, • Training: DCPC training during your employment*, Monthly Courses for a variety of areas.\n, • Benefits: Additional holiday purchasing scheme, Retail discounts with Circular Benefits, Retail Trust Wellbeing Support*, and more.\n, • Career Development: Opportunity to develop your career within an expanding business.\n, • Company Benefits: Excellent holiday allowance, Medical Reimbursement, Life assurance, pension, and sickness scheme.\n, • Extras: Christmas Savings Club, Black Circle Tyre Discount, SNAP parking paid, Cycle To Work Scheme*, Free Uniform and paid Volunteer Day.\n, • Team Culture: Strong culture of teamwork.\n \n How to Apply \n If you have the drive to be the best and want to be part of a flourishing and ambitious company, apply now! \n Please submit your application as soon as possible. Due to high volumes of applications, we reserve the right to close adverts before the closing date once we have received sufficient applications. \n Eligibility: Applicants must be eligible to work in the UK with no restrictions. Proof of Right to Work will be required at the interview stage. \n Contact Us: For any queries, please contact our Recruitment Team at . Our team is available Monday to Friday, 08:30hrs - 17:00hrs. \n Note to Recruitment Agencies: We prefer to recruit directly but have a Preferred Supplier List for when we need assistance. We'll be in touch if we need you. \n *Subject to terms and conditions. \n

\n Class 1 Casual Driver \n Location: Aberdeen Shift: Zero hour contract, casual \n Do you have a UK Class 1 CE Licence? \n If "YES," we want to hear from you! \n About the Role \n As a Class 1 Casual Driver, you will: \n \n • Safely operate and utilise multiple trailer types, such as tail-lift refrigerated, curtainsider, flatbed, and bulk tipper trailers, to complete multi-drop delivery schedules.\n, • Ensure goods are loaded and secured correctly to prevent shifting or damage. Use straps, nets, and other securing devices as needed.\n, • Perform comprehensive daily vehicle safety checks using your company phone to maintain top-notch vehicle safety and reliability.\n, • Stay in regular communication with the transport team to provide updates on your progress and ensure our customers' expectations are met.\n, • Participate in regular training sessions to stay ahead with the latest industry standards and best practices.\n \n Essential Skills and Qualifications \n \n • Must hold a UK Class 1 CE Licence.\n, • Previous experience in any of the above trailers is preferred but not essential as training will be given.\n, • Current DCPC Card and Digital Tachograph Driver Card.\n, • ADR licence is preferred but not essential.\n, • Passionate about providing excellent customer service.\n, • Ability to work to deadlines.\n, • Confident, polite, and a team player.\n, • Fit, flexible, hardworking, and self-motivated.\n \n Why Join ARR Craib Ltd? \n \n • Competitive Salary: Hourly rate of 16.00ph. This includes holiday pay. PLUS, for all hours worked between 21:00hrs and 04:00hrs, you will receive an additional 2.75ph\n, • Shift Hours: Various Shifts and start times available\n, • Overtime: Available. Enhanced rates available for working weekends.\n, • Training: DCPC training during your employment*, Monthly Courses for a variety of areas.\n, • Benefits: Retail discounts with Circular Benefits, Retail Trust Wellbeing Support, and more.\n, • Career Development: Opportunity to develop your career within an expanding business.\n, • Company Benefits: Medical Reimbursement, Life assurance, pension, and sickness scheme.\n, • Extras: Black Circle Tyre Discount* and Free Uniform.\n, • Team Culture: Strong culture of teamwork.\n \n How to Apply \n If you have the drive to be the best and want to be part of a flourishing and ambitious company, apply now! \n Please submit your application as soon as possible. Due to high volumes of applications, we reserve the right to close adverts before the closing date once we have received sufficient applications. \n Eligibility: Applicants must be eligible to work in the UK with no restrictions. Proof of Right to Work will be required at the interview stage. \n Contact Us: For any queries, please contact our Recruitment Team at . Our team is available Monday to Friday, 08:30hrs - 17:00hrs. \n Note to Recruitment Agencies: We prefer to recruit directly but have a Preferred Supplier List for when we need assistance. We'll be in touch if we need you. \n *Subject to terms and conditions. \n

\n Casual Driver \n Location: Aberdeen Shift: Casual / Zero Hours - no guaranteed work or fixed hours \n Do you have a UK Class 1 CE Licence or Class 2 C Licence? If "YES," we want to hear from you! \n About the Role \n As a Casual Driver, you will: \n \n • Safely operate and utilise curtainsider vehicles to complete multi-drop delivery schedules.\n, • Ensure goods are loaded and secured correctly to prevent shifting or damage. Use straps and other securing devices as needed.\n, • Ensure timely deliveries and collections, meeting our client's requirements and maintaining high standards.\n, • Perform comprehensive daily vehicle safety checks using your company phone to maintain top-notch vehicle safety and reliability.\n, • Stay in regular communication with the transport team to provide updates on your progress and ensure our customers' expectations are met.\n, • Participate in regular training sessions to stay ahead with the latest industry standards and best practices.\n \n Essential Skills and Qualifications \n \n • Must hold a UK Class 1 CE Licence or Class 2 C Licence.\n, • Current DCPC Card and Digital Tachograph Driver Card.\n, • Bring your passion for delivering exceptional customer service, making every interaction count.\n, • Thrive under deadlines, showcasing your ability to work efficiently and effectively.\n, • Be a confident, polite, and collaborative team player, contributing to a positive work environment.\n, • Have excellent geographical knowledge, navigating routes with ease and precision.\n \n Why Join ARR Craib Ltd? \n \n • Competitive Salary: Hourly rate of 17.20ph. This includes holiday pay.\n, • Shift Hours: Monday to Friday - 07:00hrs start\n, • Overtime: Available. Enhanced rates available for working weekends.\n, • Training: DCPC training during your employment*, Monthly Courses for a variety of areas.\n, • Benefits: Retail discounts with Circular Benefits, Retail Trust Wellbeing Support, and more.\n, • Career Development: Opportunity to develop your career within an expanding business.\n, • Company Benefits: Medical Reimbursement, Life assurance, pension, and sickness scheme.\n, • Extras: Black Circle Tyre Discount* and Free Uniform.\n, • Team Culture: Strong culture of teamwork.\n \n How to Apply \n If you have the drive to be the best and want to be part of a flourishing and ambitious company, apply now! \n Please submit your application as soon as possible. Due to high volumes of applications, we reserve the right to close adverts before the closing date once we have received sufficient applications. \n Eligibility: Applicants must be eligible to work in the UK with no restrictions. Proof of Right to Work will be required at the interview stage. \n Contact Us: For any queries, please contact our Recruitment Team at . Our team is available Monday to Friday, 08:30hrs - 17:00hrs. \n Note to Recruitment Agencies: We prefer to recruit directly but have a Preferred Supplier List for when we need assistance. We'll be in touch if we need you. \n *Subject to terms and conditions. \n

\n Class 1 Driver \n Location: Aberdeen Shift: Monday to Friday, Nights \n Do you have a UK Class 1 CE Licence? \n If "YES," we want to hear from you! \n About the Role \n As a Class 1 Driver, you will: \n \n • Use a double decker trailer to trunk from Aberdeen to Glasgow and back to Aberdeen.\n, • Ensure goods are loaded and secured correctly to prevent shifting or damage. Use straps, nets, and other securing devices as needed.\n, • Perform comprehensive daily vehicle safety checks using your company phone to maintain top-notch vehicle safety and reliability.\n, • Stay in regular communication with the transport team to provide updates on your progress and ensure our customers' expectations are met.\n, • Participate in regular training sessions to stay ahead with the latest industry standards and best practices.\n \n Essential Skills and Qualifications \n \n • Must hold a UK Class 1 CE Licence.\n, • Current DCPC Card and Digital Tachograph Driver Card.\n, • Passionate about providing excellent customer service.\n, • Ability to work to deadlines.\n, • Confident, polite, and a team player.\n, • Fit, flexible, hardworking, and self-motivated.\n \n Why Join ARR Craib Ltd? \n \n • Competitive Salary: 15.35ph PLUS for all hours worked between 21:00hrs & 04:00hrs, you will receive an additional 2.75 per hour.\n, • Shift Hours: Monday to Friday, start time of 17:00hrs.\n, • Overtime: Available. Enhanced rates for working weekends.\n, • Training: DCPC training during your employment*, Monthly Courses for a variety of areas.\n, • Benefits: Additional holiday purchasing scheme, Retail discounts with Circular Benefits, Retail Trust Wellbeing Support*, and more.\n, • Career Development: Opportunity to develop your career within an expanding business.\n, • Company Benefits: Excellent holiday allowance, Medical Reimbursement, Life assurance, pension, and sickness scheme.\n, • Extras: Christmas Savings Club, Black Circle Tyre Discount, Cycle To Work Scheme*, SNAP parking paid, Free Uniform and paid Volunteer Day.\n, • Team Culture: Strong culture of teamwork.\n \n How to Apply \n If you have the drive to be the best and want to be part of a flourishing and ambitious company, apply now! \n Please submit your application as soon as possible. Due to high volumes of applications, we reserve the right to close adverts before the closing date once we have received sufficient applications. \n Eligibility: Applicants must be eligible to work in the UK with no restrictions. Proof of Right to Work will be required at the interview stage. \n Contact Us: For any queries, please contact our Recruitment Team at . Our team is available Monday to Friday, 08:30hrs - 17:00hrs. \n Note to Recruitment Agencies: We prefer to recruit directly but have a Preferred Supplier List for when we need assistance. We'll be in touch if we need you. \n *Subject to terms and conditions. \n

\n Class 2 Driver \n Location: Aberdeen Shift: Monday - Friday, Days \n Do you have a UK Class 2 C Licence? \n If "YES," we want to hear from you! \n About the Role \n As a Class 2 Driver, you will: \n \n • Use curtain side trailers to make multi drop collections and deliveries of pallets within the Pallet Network to the Highland area.\n, • Ensure goods are loaded and secured correctly to prevent shifting or damage. Use straps, nets, and other securing devices as needed.\n, • Perform comprehensive daily vehicle safety checks using your company phone to maintain top-notch vehicle safety and reliability.\n, • Stay in regular communication with the transport team to provide updates on your progress and ensure our customers' expectations are met.\n, • Participate in regular training sessions to stay ahead with the latest industry standards and best practices.\n \n Essential Skills and Qualifications \n \n • Must hold a UK Class 2 C Licence.\n, • Current DCPC Card and Digital Tachograph Driver Card.\n, • Passionate about providing excellent customer service.\n, • Ability to work to deadlines.\n, • Confident, polite, and a team player.\n, • Good geographical knowledge.\n, • Fit, flexible, hardworking, and self-motivated.\n \n Why Join ARR Craib Ltd? \n \n • Competitive Salary: 15.35 per hour.\n, • Shift Hours: 07:00hrs start, Monday to Friday.\n, • Overtime: Available. Enhanced rates available for working weekends.\n, • Training: DCPC training during your employment*, Monthly Courses for a variety of areas.\n, • Benefits: Additional holiday purchasing scheme, Retail discounts with Circular Benefits, Retail Trust Wellbeing Support*, and more.\n, • Career Development: Opportunity to develop your career within an expanding business.\n, • Company Benefits: Excellent holiday allowance, Medical Reimbursement, Life assurance, pension, and sickness scheme.\n, • Extras: Christmas Savings Club, Black Circle Tyre Discount, SNAP parking paid, Cycle To Work Scheme*, Free Uniform and paid Volunteer Day.\n, • Team Culture: Strong culture of teamwork.\n \n How to Apply \n If you have the drive to be the best and want to be part of a flourishing and ambitious company, apply now! \n Please submit your application as soon as possible. Due to high volumes of applications, we reserve the right to close adverts before the closing date once we have received sufficient applications. \n Eligibility: Applicants must be eligible to work in the UK with no restrictions. Proof of Right to Work will be required at the interview stage. \n Contact Us: For any queries, please contact our Recruitment Team at . Our team is available Monday to Friday, 08:30hrs - 17:00hrs. \n Note to Recruitment Agencies: We prefer to recruit directly but have a Preferred Supplier List for when we need assistance. We'll be in touch if we need you. \n *Subject to terms and conditions. \n

\n Class 2 Driver \n Location: Aberdeen Shift: 225 days a year, on a rolling rota. \n Do you have a UK Class 2 C Licence? \n If "YES," we want to hear from you! \n About the Role \n As a Class 2 Driver, you will: \n \n • Use a curtain side trailer to deliver bakery products to a range of retail outlets, wholesale and convenience stores across Aberdeen city. This will involve tail-lift use and manual handling.\n, • Ensure goods are loaded and secured correctly to prevent shifting or damage. Use straps, nets, and other securing devices as needed.\n, • Perform comprehensive daily vehicle safety checks using your company phone to maintain top-notch vehicle safety and reliability.\n, • Stay in regular communication with the transport team to provide updates on your progress and ensure our customers' expectations are met.\n, • Participate in regular training sessions to stay ahead with the latest industry standards and best practices.\n \n Essential Skills and Qualifications \n \n • Must hold a UK Class 2 C Licence.\n, • Current DCPC Card and Digital Tachograph Driver Card.\n, • Passionate about providing excellent customer service.\n, • Ability to work to deadlines.\n, • Confident, polite, and a team player.\n, • Fit, flexible, hardworking, and self-motivated.\n \n Why Join Gregory Distribution Ltd? \n \n • Competitive Salary: 15.38ph, working 10 hour shifts.\n, • Shift Bonus: For all shifts worked, you will receive an additional 5.50 per shift.\n, • Shift Hours: Working on a 3-week rolling rota, starting at 02:00hrs.\n, • Overtime: Paid at an hourly rate of 15.38 per hour.\n, • Training: DCPC training during your employment*, Monthly Courses for a variety of areas.\n, • Benefits: Additional holiday purchasing scheme, Retail discounts with Circular Benefits, Retail Trust Wellbeing Support*, and more.\n, • Career Development: Opportunity to develop your career within an expanding business.\n, • Company Benefits: Excellent holiday allowance, Medical Reimbursement, Life assurance, pension, and sickness scheme.\n, • Extras: Christmas Savings Club, Black Circle Tyre Discount Cyle to Work Scheme*, SNAP parking paid, Free Uniform and paid Volunteer Day.\n, • Team Culture: Strong culture of teamwork.\n \n How to Apply \n If you have the drive to be the best and want to be part of a flourishing and ambitious company, apply now! \n Please submit your application as soon as possible. Due to high volumes of applications, we reserve the right to close adverts before the closing date once we have received sufficient applications. \n Eligibility: Applicants must be eligible to work in the UK with no restrictions. Proof of Right to Work will be required at the interview stage. \n Contact Us: For any queries, please contact our Recruitment Team at . Our team is available Monday to Friday, 08:30hrs - 17:00hrs. \n Note to Recruitment Agencies: We prefer to recruit directly but have a Preferred Supplier List for when we need assistance. We'll be in touch if we need you. \n *Subject to terms and conditions. \n

I am recruiting for my client, a well established business specialising in critical communication systems and infrastructure throughout the UK. They are now seeking an Electronics Repair Engineer to join their engineering team in Scotland. The successful candidate will live in or close to Aberdeen, Dundee, Stirling, Edinburgh, Dunfermline, Perth, Glenrothes, Montrose, Glasgow, Dumfries, Berwick, Carlisle. This is a fantastic opportunity for an ex military engineer with a strong electronics background who has genuine component level fault finding and repair experience. The role will involve working on specialist RF transmitters and associated communications equipment, diagnosing faults down to component level rather than simply replacing complete boards or units. The successful candidate will initially undertake training at my client's workshop in Wales, with accommodation and expenses provided. Once fully trained, the role will be predominantly based in Scotland and will combine workshop based electronics repair with occasional field engineering duties. Electronics Repair Engineer Responsibilities: • Diagnose, fault find and repair RF transmitters and associated communications equipment to component level and carry out PCB repair, soldering, desoldering, rework and component replacement., • Test, align and calibrate repaired equipment prior to returning it to service., • Use electronic test equipment including oscilloscopes, multimeters, signal generators and spectrum analysers., • Install, commission, maintain and upgrade communications systems and associated equipment., • Support fault investigation and repair across customer and network sites when required., • Participate in an out of hours support rota once fully trained. Electronics Repair Engineer Requirements: • Strong electronics engineering background with ONC, HNC or equivalent qualification in Electronics Engineering, Telecommunications, Radio Engineering or another relevant discipline., • Experience diagnosing faults on PCBs down to individual components including resistors and capacitors., • Confident carrying out soldering, desoldering, rework and electronic repairs., • Experienced using electronic test equipment including oscilloscopes, spectrum analysers and multimeters., • Willingness to travel and stay away from home occasionally when required., • Full UK driving licence. Electronics Repair Engineer Benefits: • Competitive basic salary depending on experience., • On call allowance and overtime payable., • Monday to Friday, 9am to 5pm., • Company car or car allowance., • Mobile phone and laptop., • Company pension., • Employee assistance programme. NOTE: My client encourages applications from candidates from both commercial and ex military backgrounds. Suitable candidates may have served in the Royal Navy, British Army or Royal Air Force in electronics, communications, avionics, radar, weapons engineering, telecommunications or other electronic engineering disciplines. JBRP1_UKTJ

Workshop Mechanic (Rescue Boats). Extensive overtime + 33 days holiday + pension + Shore based in Workshop.

Junior Marine Electrician (On-Shore) Aberdeen (Local Patch) £35,000 - £40,000 (OTE £55,000) + Up Too 2x Overtime + Progression + Take Home Company Van + Pension Are you an Electrical Engineer with experience working on Circuit Breakers and Relays that wants full training to become a Electrical Marine expert for one of the nation's leading Electrical Engineering company? xrnqpay Do you want to work alongside i Please make sure you read the following details carefully before making any applications. Please click on the apply button to read the full job description

Job Role: Electronics Technician (CompEx) Job Type: Contract, Onsite Duration: 6 Months Hours: 37.5hrs/wk Industry: Oil & Gas Location: Aberdeen Rate Expectations: £20.00 – 23.50/hr + Overtime (PAYE Umbrella) Profile – Electronics Technician (CompEx) My client is a world leader in the provision of highly advanced technical solutions to Energy sectors. They are currently looking for an Electronics Technician with CompEx certification to join their team. Candidates will have the opportunity to work in an environment where investment is continuous and substantial, technology is leading edge. Job Role – Electronics Technician (CompEx) The Electronic Technician is responsible for ensuring on-time delivery of equipment as per operational demands. The Electronic Technician improves maintenance related nonproductive time ratio of the Product Line's assets within the Maintenance Base (MB), and improves maintenance efficiency and people productivity. The role is predominantly onshore with occasional offshore trips. Duties – Electronics Technician (CompEx) • Maintain assigned equipment according to the pertinent maintenance program and compliant with the reliability centered maintenance strategy through adherence to the Computerized Maintenance Management System and standard work., • Adhere to transactional discipline within Technology Lifecycle Management (TLM) business systems to record materials and supplies, labor costs and equipment maintenance performance history such as movements, work orders, parts used and time to maintain., • Comply with TLM Product Line standards., • Participate in the continuous improvement culture, initiatives and improvement plans within the MB to improve asset utilization and cost of service delivery (CoSD)., • Participate in continuous improvement efforts to improve asset turnaround time, which includes reducing downtime due to maintenance, parts and return authorization numbers, failures and work-in-process., • Support continuous improvement efforts to improve the efficiency and productivity of Maintenance Technicians., • Implement CoSD projects, such as the planned repair and reuse of parts., • Participate in failure investigations as assigned., • Comply with the TLM Competency Management System Skills/Experience – Electronics Technician (CompEx) • COMPEX certified Electronics/Electrician, • Strong knowledge of electronic circuits, components, and systems, • Ability to diagnose, troubleshoot, and repair electronic equipment and instrumentation, • Competency in reading and interpreting electrical/electronic schematics, wiring diagrams, and technical drawings, • Understanding of control systems, sensors, and automation equipment, • Familiarity with digital and analogue electronics, • Knowledge of electrical safety standards and best practices, • Ability to install, calibrate, and maintain electronic systems and devices Candidates who are currently an Electronics Technician, Electrical Technician, Maintenance Technician, Repair Technician and Electronics Technician could be suitable for this position. To make an application for this role please submit your CV to or for more information call 01453829529. For details of other opportunities available within your chose field please visit our website Omega is acting as an Employment Agency in relation to this vacancy. Omega does not charge candidates any recruitment or job-seeking fees at any stage of the hiring process. JBRP1_UKTJ

Lead Electrical Engineer Victoria, Westminster £50,000 - £55,000 New role for a Lead Electrical Engineer to join a large, well renowned building service provider on a blue chip building in Westminster! This is a great role if you're looking to progress further in your career. As a Lead Electrical Engineer, you'll lead a team of M&E Engineers, carry out PPM and reactive maintenance on M&E systems, allocate works, oversee logbooks and report into the Engineering Manager. This is a static, shift role, following a continental shift pattern (Days and night shift) Lead Electrical Engineer Duties: • PPMs & Reactive maintenance, • Single and Three Phase Power, Motors, Generators (on/off load tests), UPS, LV/HV switching, Shutdowns, Switchgear, Motors, Emergency Lighting, Fire Alarm Test, AHUs, FCUs, VAVs, Sprinkler Systems, • Carry out isolation of plant and systems in accordance with safety requirements., • Ensure corrective/repair works are carried out in accordance with regulations., • Endorse safe working practices, quality standards conformity and best practice methods., • Organising subcontractors, • Completing logbooks and RAMS, • Reports, • Conducting client meetings, • Ensuring the account manager is kept up to date on a regular basis, • Liaising with client representatives in respect of corrective repair works., • Permits to work, • Raise and close jobs on PDA's as necessary. Lead Electrical Engineer Requirements: • City & Guilds / NVQ (or equivalent) qualification in Electrical Installations / Engineering, • Building Services Maintenance experience, • Career driven and motivated, • Polite and personable Salary and Package: • £50,000 - £55,000 per annum, • Private health and dental care provided, • Continental shift pattern, days and nights, • 20 days annual leave, • Company pension scheme, • Overtime available, • On-going training, • Internal progression If you're interested in this Shift Lead role, apply today! Posted by Alex Clark JBRP1_UKTJ

Pump Engineer (HVAC / FM) £40,000 - £45,000 + 25 Days Holiday + Progression + Training + Overtime + On-Call Allowance + Company Benefits Aberdeen, Scotland Are you a Pump Engineer or Mechanical/Electrical Engineer looking for a varied field-based role working on a wide range of commercial, industrial and domestic pumping systems? This is an excellent opportunity to join an established pump installation and servicing business with around 60 employees and multiple branches across Scotland and the North of England. The company provides specialist pumping solutions across HVA, FM, commercial, industrial and other key sectors, with a strong reputation for quality and technical expertise. In this role, you'll install, service, maintain and fault-find on a variety of pumping equipment and associated systems. You'll work directly with customers on site, diagnose problems, complete installations and commissioning, and provide technical support to clients and colleagues. The ideal candidate will have a strong electrical/mechanical engineering background with experience working on pumping systems, and be comfortable working independently across customer sites. The Role: • Installing, servicing and maintaining a range of pumping equipment, • Carrying out reactive repairs and fault finding, • Working on booster sets, pressurisation units, sump sets and drainage systems, • Carrying out system testing and commissioning, • Completing inspections to ensure equipment is fully operational, • Taking part in the out-of-hours on-call rotaThe Person:, • Pump Engineer, Service Engineer, Maintenance Engineer or similar background, • City & Guilds or equivalent qualification in an electrical/mechanical discipline, • Full UK driving licence If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. Keywords: Engineering, Maintenance, Pump Engineer, HVAC, Heating Pump Systems, Installation, Servicing, Field Based, Aberdeen, Scotland, Pump Technician, Pumps Reference Number: BBBH27711a We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. JBRP1_UKTJ

We are supporting a leading defence organisation with the continued development of its Land Ceptor Systems Engineering team. This role will support the verification, validation and certification of a complex weapon system across UK and international programmes, working closely with multi-disciplinary engineering teams. Typical responsibilities include: • Reviewing technical evidence and assessing compliance against requirements, • Supporting certification activities, including compliance documentation, verification reports and supporting evidence, • Reviewing and agreeing Design Verification Plans and supporting design reconciliation activities, • Working with Systems, Mechanical, Electrical and Software Engineering teams to identify verification gaps and support corrective actions, • Supporting process improvements through efficient ways of working and automation The ideal candidate will have: • Experience using IBM Rational DOORS Classic, • Proven experience analysing evidence and assessing compliance against requirements, • Knowledge of Verification & Validation processes and methodologies, • Experience preparing compliance documentation and certification evidence, • Strong analytical skills with the ability to conduct technical investigations and work across multi-disciplinary teams This position offers a lucrative benefits package, which includes but is not limited to: • Company bonus scheme, based on company performance, • Strong employer pension contribution, • Opportunity for paid overtime, • Generous flexi leave allowance, with additional days available, • Flexible working arrangements welcomed, • Enhanced parental leave, covering maternity, adoption, shared parental and paternity leave, plus neonatal leave and fertility testing/treatment support, • Excellent on-site facilities, including subsidised meals and free car parking Please note that due to the nature of the client's business, only candidates who currently hold full British Citizenship without limitations, or Dual Nationality inclusive of British Citizenship, will be considered. Successful candidates will also be required to complete the relevant security screening. Please apply via the advert or contact Jamie at Eclectic Recruitment for more information. We endeavour to reply to every candidate, every time, but if you haven't heard back within 10 days, please understand that you have unfortunately been unsuccessful for this position, or the position has been filled. Please call the office or send an email to discuss other potential opportunities. JBRP1_UKTJ

Would you like to work with the latest products in the energy industry? Do you enjoy being part of a successful team? Join Our Team! Our Manufacturing organization brings together advanced engineering, manufacturing, and operational excellence to deliver world-class products and services to the energy industry. We are looking for a Manufacturing Engineer who is passionate about driving efficiency, quality, and continuous improvement while supporting complex manufacturing and refurbishment activities. As a Manufacturing Engineer, you will lead, coordinate, and develop repair and manufacturing strategies to support the refurbishment of rental equipment, aftermarket equipment, and new-build solutions equipment. You will be responsible for evaluating the criticality of components and understanding the impact on fit, form, and function. You will provide technical support to the designated workshop, ensure work instructions and survey reports are executed in accordance with production plans, and continuously identify opportunities to improve products, processes, and procedures. This role supports the following product lines: Wellhead Rental Tooling Tubing Hangers and Associated Tooling Completion and Workover Riser Systems • Conduct disposition surveys and define appropriate repair methods, including rework, use-as-is, and scrap recommendations., • Develop, update, and maintain technical documentation, including ITPs, TMs, T&A procedures, weld maps, and MRFs to support repair and manufacturing activities., • Provide technical support for OSP scopes, coating requirements, masking drawings, and weld map queries while collaborating with suppliers and internal stakeholders., • Create and maintain torque sheets, service BOMs, and maintenance documentation to support workshop operations and tooling maintenance., • Liaise with Tooling Technicians and workshop personnel to ensure testing equipment readiness and successful execution of testing scopes., • Troubleshoot shop-floor issues, support refurbishment activities, and maintain accurate rental tooling records and job tracking information., • Support manufacturing planning activities through updates to master routings, work orders, inventory alternatives, and process improvements., • Manage master configuration data within Oracle and CMRO while driving cost reduction, efficiency improvement, and continuous improvement initiatives. To be successful in this role, you will: • Have proven experience in a manufacturing environment, preferably within aftermarket, repair solutions, or industrial equipment operations., • Demonstrate strong problem-solving, analytical thinking, and process improvement capabilities., • Have the ability to communicate effectively and professionally with internal and external stakeholders and customers., • Possess excellent written communication, technical reporting, and presentation skills., • Be capable of managing multiple priorities while maintaining high standards of quality and customer focus., • Have experience collaborating within cross-functional teams to achieve business objectives., • Display a results-oriented mindset with strong attention to detail and continuous improvement., • Have knowledge of manufacturing processes, repair methodologies, testing requirements, and engineering best practices., • Be committed to maintaining the highest levels of safety, quality, and operational excellence. We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns: This is a site-based role with a standard 37.5-hour working week. Monday to Thursday: 8:00 AM – 5:00 PM (including a one‑hour lunch break). Friday: 8:00 AM – 1:30 PM. Overtime opportunities are regularly available, subject to business and workload requirements. Optional participation in a 1-in-3 backshift rotation schedule. Our people are at the heart of what we do at Baker Hughes. We know we are better when all our people are developed, engaged, and able to bring their whole authentic selves to work. We invest in the health and wellbeing of our workforce, train and reward talent, and develop leaders at all levels to bring out the best in each other. Our innovations have transformed the energy industry for over a century. To continue driving progress, we invest in people who embrace change and strive for excellence. • Contemporary work-life balance policies and wellbeing activities., • Competitive pension and retirement benefits., • Comprehensive private medical care options., • Life insurance and disability coverage programs., • Tailored financial and savings programs., • Learning and development opportunities., • Additional elected or voluntary benefits. The Baker Hughes internal title for this role is: Manufacturing Experienced Professional - Manuf Eng Specialist With operations in over 120 countries, we are developing and deploying industry-leading technologies and services to take energy forward. For more than a century, our inventions have revolutionized energy. Today, we are bringing our expertise to make oil and gas safer, cleaner, and more efficient. Our people are the trusted experts, relied on to solve customer challenges big and small. We invest in the health and well‑being of our workforce, train and reward talent, and develop leaders at all levels to bring out the best in each other. We believe in creating an environment of diversity and inclusion, without bias. We know we are better when all of our people are developed, engaged, and able to bring their whole authentic selves to work. We're makers, inventors, and leaders who aren't afraid of the tough challenges. We believe pushing boundaries will help to lead the way for a new energy future. #J-18808-Ljbffr

Lead Engineer City of London £48,000 - £50,000 New role for a Lead Engineer to join a rapidly growing commercial service provider in the City of London! This is a great role to expand your lead experience, join a growing company and receive opportunities to progress further within the business As a Lead Engineer, you will oversee a team of M&E Engineers across several sites, whilst also carrying out PPM and reactive maintenance, fault find / trouble shoot, allocate works, update site logbooks and respond to client requests. Lead Engineer Duties: • Carry out planned preventative maintenance (PPM) and reactive maintenance across electrical and mechanical systems, • Perform electrical fault-finding and diagnostics, • Work on single and three-phase power systems, • Carry out emergency lighting tests and maintenance, • Monitor and operate BMS systems, • Maintain AHUs, FCUs, pumps, and motors, • Oversee generators, UPS systems, and critical plant equipment, • Assist with VAV and VRF systems, • Ensure water treatment checks and compliance tasks are completed, • Supervise subcontractors and ensure all works are carried out safely and to standard, • Maintain accurate site logbooks and reports, • Build and maintain strong working relationships with the client and occupants, • Support and oversee on-site engineers to ensure smooth building operation Lead Engineer Requirements: • City and Guilds / EAL / NVQ or equivalent qualification in either electrical engineering / installations or a mechanical related subject, • At least 5 years experience within commercial property maintenance, • Strong M&E Knowlege, • Ability to lead a team, • Client facing Salary and Package: • Up to £50,000 per annum, • Monday - Friday, 8am - 5pm, • Monthly travel allowance, • Potential for yearly bonus, • Yearly pay reviews, • 25 days annual leave + Bank holidays, • Company pension scheme, • Overtime available, • Internal progression Posted by Alex Clark JBRP1_UKTJ

Electrical Maintenance Engineer West Wales £45,000 to £52,000 per year What You'll Do: You will join a growing food manufacturing site as an Electrical Maintenance Engineer, working a days based role within a busy production environment. The focus of the role is maintaining electrical reliability across production and packaging machinery, while supporting ongoing site investment and automation projects. Responsibilities include: • Planned and reactive electrical maintenance on production equipment, • Fault finding on three phase systems, motors and control panels, • Basic PLC fault finding with training provided, • Supporting new machinery installations and commissioning, • Upholding strong health and safety and continuous improvement standards What You'll Bring: • Experience as an Electrical Maintenance Engineer in manufacturing, ideally food or FMCG, • Strong electrical skills, particularly three phase and control panels, • Basic mechanical awareness to support production when required, • Exposure to PLC fault finding or a desire to develop, • A proactive, hands on approach and commitment to safe working Why You Should Apply: • Salary of £45,000 to £52,000 depending on experience, plus overtime, • Days based role offering stability and flexibility, • Investment in automation, new equipment and modern facilities, • Supportive management and a close knit engineering team, • Clear long term progression as the site continues to grow Ready to Apply? Contact Jacob Purcell to find out more. Please apply with a CV and a cover letter outlining why you're perfect for the role. Know someone great for the job? We offer a referral scheme-just get in touch! Note: We do our best to respond to every application, but due to volume, we can't always guarantee it. If you haven't heard back within 7 days, unfortunately, you haven't been successful this time. Keep an eye on our site for new opportunities! JBRP1_UKTJ

This role: Call out's, Fault Finding, Planned maintenance, Fixing and servicing marine electrical systems Monday - Thursday, 8:00 am- 4:30 pm - Friday 8:00 am - 3:30 pm Based in Aberdeen, occasional travel further afield Full training on Marine Electrical systems Optional overtime (boosted earning p

Job Title: CNC Machinist Location: Aberdeen Salary: £21.71 per hour CNC Machinist required for my client based in Aberdeen who work within the oilfield equipment manufacturing industry. The successful CNC Machinist will need to have Heidenhain programming experience to be considered for the position. CNC Machinist Responsibilities The CNC Machinist will carry out all aspects of machining work required on new products and client supplied equipment utilising machines as detailed in route sheet instructions. Machine Manufacture of products to controlled drawings and route sheet instructions. Machine preparation of valves and equipment for welding. Machine finishing of valves and equipment after welding and PWHT - maintaining traceability at all stages of production. Carry out daily maintenance routines on machines. CNC Machinist Requirements Experience in operation of CNC machines is essential. Heidenhain TNC Control and programming experience is essential. Need to have experience in the operation of CNC Milling. 5 years' experience working as a CNC machinist. Use of Fanuc controls would be beneficial, but not essential as training will be given. Based within a commutable distance of Aberdeen. Full UK Driving Licence. CNC Machinist Salary & Benefits £21.71 per hour, depending on experience; overtime is payable at x1.5, x2 on Sundays (40 hour week) Full-time position - Day shift 8am to 4:30pm with half hour lunch break. 8-hour shifts - Monday to Friday. Holiday package - 30 days (inclusive of 10 public holidays). Company pension scheme. Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for. TPBN1_UKTJ

Job Title: Manual Horizontal Borer Operator Location: Aberdeen Salary: £21.71 per hour My client based in Aberdeen are looking for a Manual Horizontal Borer Operator The Manual Horizontal Borer Operator will be required to carry out all aspects of machining work required on new products and client supplied equipment utilising machines, as detailed in route sheet instructions. Manual Horizontal Borer Operator Responsibilities Machine Manufacture of products to controlled drawings and route sheet instructions Machine preparation of valves and equipment for welding Machine finishing of valves and equipment after welding and PWHT Maintaining traceability at all stages of production Maintenance of machines being operated Ensure good housekeeping is maintained in all areas. Specifically, area of machine being operated. In process inspections as required on any item being manufactured or re-worked. Carry out daily maintenance routines on machines Carry out any additional tasks within capabilities as directed by the workshop supervisor or management Manual Horizontal Borer Operator Requirements Experience required within machining. Experience in operation of manual horizontal borer is preferred. Based within a commutable distance of Aberdeen. Manual Horizontal Borer Operator Salary & Benefits £21.71 per hour, depending on experience; overtime is payable at x1.5, x2 on Sundays (40 hour week) Full-time position - Day shift 8am to 4:30pm with half hour lunch break. 8-hour shifts - Monday to Friday. Holiday package - 30 days (inclusive of 10 public holidays). Company pension scheme. Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for. TPBN1_UKTJ

Salary: Up to £52,208 per annum Hours: 40 Hours per week Location: Aberdeen • OT at 1.5x, • 30 days holiday, • Pension Scheme, • Van+FC, • Callouts My client is a trusted family-run material handling specialist. Due to continued growth in the North-east of Scotland, they are seeking an experienced Forklift Engineer to join their team covering the Aberdeen area. • Carry out routine planned preventative maintenance (PPM) and safety inspections., • Diagnose and repair mechanical, electrical, hydraulic, pneumatic, and control system faults., • Attend reactive breakdowns to minimise customer downtime., • Build strong, professional relationships with our diverse client base while working safely on site., • Recent and relevant experience in a similar role within the Material Handling industry i.e. Forklift Engineer, Fork truck Engineer or hold a Forklift qualification., • Excellent knowledge of Pneumatics + control systems., • Proven experience repairing and servicing gas, diesel and Electric Forklifts, • Strong problem-solving skills and diagnostics abilities, • Full UK driving licence, • Competitive salary based on experience., • Enhanced overtime rates., • 30 days holiday, • Pension scheme, • Loyalty-based holiday scheme with ability to gain up to 5 additional holiday days #J-18808-Ljbffr

Job DescriptionPump Engineer (HVAC / FM)\ N \n £40,000 - £45,000 + 25 Days Holiday + Progression + Training + Overtime + On-Call Allowance + Company Benefits\ N \n Aberdeen, Scotland\ N \n \nAre you a PumpEngineer or Mechanical/Electrical Engineer looking for a varied field-based role working on a wide range of commercial, industrial and domestic pumping systems?\ N \n \nThis is an excellent opportunity to join an established pump install...\ N \n \n \n \n \ N \n \n \n \n ZIPC1_UKTJ

Marine Electrician (On - Shore). Are you an Marine Electrician or similar that wants to work for one of Scotlands most prominant companies that has a wide variety of marine projects, with a specialist training programme and uncapped overtime to greatly increase your earning potential?.

Benefits Overtime opportunities Eligible for up to £2,000 Bonus Generous pension scheme 28 days holiday (including Bank Holidays) rising with service Company sick pay Life Insurance Employee Assistance Programme Cycle to work scheme BP Fuel card Free on-site parking Industry-leading operational tra

Multiskilled Maintenance Engineer £50,000 4 on 4 off (2 Days / 2 Nights) Blackwood Yolk Recruitment are proud to be working with an established, family-owned manufacturer that has been operating for over 100 years. The business has an excellent reputation within its industry, but this isn't a company standing still. There has been significant investment into the site, production equipment and engineering team, with further growth and development planned. As part of this continued investment, we're looking for a Multiskilled Maintenance Engineer to join the team. You'll be working within a busy, highly automated manufacturing environment, providing both electrical and mechanical support across production machinery. This is a hands-on engineering role where you'll have real responsibility for keeping the plant running, responding to breakdowns and driving improvements in reliability. As a Multiskilled Maintenance Engineer, this is what you'll be doing: • Providing electrical and mechanical maintenance support across automated production equipment., • Carrying out fault finding and repairs to minimise downtime and keep production running., • Responding quickly and effectively to breakdowns., • Completing planned preventative maintenance (PPM) across the site., • Fault finding on PLC-controlled machinery, with exposure to Siemens and Allen Bradley systems., • Maintaining motors, drives, sensors, conveyors and associated production equipment., • Identifying recurring faults and looking at ways to improve machine reliability., • Supporting engineering improvements, installations and ongoing investment projects., • Working closely with production and other engineers to prioritise maintenance activity., • Working independently when required as part of the shift engineering team. The experience you'll bring to the team: We're looking for an experienced Maintenance Engineer who can bring a good mix of electrical and mechanical knowledge. You'll ideally have: • Previous maintenance engineering experience within a manufacturing, production or transferable industrial environment., • Strong electrical and mechanical fault-finding skills., • Experience working on automated production machinery., • PLC fault-finding experience, ideally Siemens, Allen Bradley or similar., • Experience with both planned and reactive maintenance., • A recognised electrical, mechanical or engineering qualification., • The confidence to fault find, make decisions and work independently when required. And this is what you'll get in return: • £50,000 salary, • 4 on 4 off shift pattern - 2 days / 2 nights, • Overtime opportunities, • The stability of joining a manufacturer with over 100 years of history, • A business investing heavily into its site, machinery and engineering team, • A highly automated manufacturing environment, • Training and development opportunities, • Genuine opportunities for future progression as the engineering function continues to develop Interested? This is a great opportunity if you're looking for the stability of an established manufacturer but still want to join a business that's investing, improving and developing its engineering operation. If you're an Electrical, Mechanical or Multiskilled Maintenance Engineer and would like to find out more, apply today or get in touch with Andy Jones at Yolk Recruitment for a confidential conversation. We also operate a referral scheme, so if this isn't quite right for you but you know someone who could be suitable, please get in touch. Please note, whilst we do our best to contact all candidates, due to the high number of applications we receive we cannot guarantee this for every role. If you have not heard from us within 7 days of applying, unfortunately you have been unsuccessful on this occasion. Please keep an eye on our website for further opportunities. JBRP1_UKTJ

Right Match Recruitment Group has the privilege to recruit on behalf of our very prestigious client based in Rainham, East London, Essex. We are recruiting for experienced and forward thinking Shift Engineering Reliability Leader. This is full time and permanent position and working for very well established company. Very interesting and varied role with a scope for progression. This is a very exciting time to join a growing company regarded as experts in their industry, with opportunities for employees to develop within their role. Work Pattern: • 39 hours per week, • Mon-Fri (overtime weekend available), • Shifts rotating every weekly between morning and afternoon shift, • Day Shift - 06:00 - 14:00, • Afternoon Shift - 14:00 - 22:00, • Department: Engineering The role: • The role provides expert direction to the team to improve reliability and realise strategic and tactical goals for the site operations. Reliability leader has hands-on responsibility to provide direct support to the shifts and the long-term asset care on site and take responsibility for a team of shift Engineering Technicians in absence of the Asset Care Lead. Key areas of responsibility: • Complete and track, work orders / jobs allocation on the CMMS system on daily basis., • Develop maintenance plans and asset care packages according to site safety procedures and risk assessments, • Manage shift-based engineering activities in collaboration with operating team to achieve shift targets, • Develop and implement training plans to ensure necessary skill mix and capability within the shift-based team, • Identify and raise requisitions for spares used through the operations administrator, • Complete allocated PPM tasks and submitted PPM reports to the Asset Care Lead, • Support and take key roles in the team such as such as duty holder, First aider / Fire Marshall, • Problem solve and trouble shoot issues specific on individual production equipment to help the plan performance to reach KPIs, • Carry out continuous improvement tasks identified, • Supervise contractors on site for specific task and take responsibility for them whilst on site, • Issue and close work permit if authorised to do so, • Always maintain tools and equipment in the workshop in good working order, • Comply with site technical and food safety standards, • Maintain critical infrastructure on site as required Accountability: • Reporting to the Asset Care Lead with a dotted line to the site Manager, • Follow GMP, SHE and Engineering procedures, • Support production prioritising safety, quality and production output, • Comply with legislative and statutory requirements, • Demonstrate company values and follow company policies at all times Person specification: • Actively championing health and safety and environment, • Treat all team members with respect., • Demonstrate and operate with high integrity, • Take ownership & responsibility for your role and deliver to best satisfy people safety, Quality, Delivery, Cost, • Strong attention to detail, • Reliable and fair leader with a can-do attitude, • Good communication skills, both verbal and written, • Ideally, can supervise a small team in the absence of the asset care lead, • Present asset care plans and plant reliability plan reports to senior Management Qualifications/Experience required: • Electrical and Mechanical qualified within the following range, • Degree /HND/HNC/OND/ONC/Btech or level 3 NVQ or above, • 18th edition wiring regulation, City & Guilds 236/2360 parts 1,2 and C (electrical installation or similar), • Experience working on mechanical and electrical aspects of machines and setting up of production equipment, • FLT licence, • PC/IT literate, • Relevant experience or certification in machine operation / Engineering operations, • Proven industry experience in a manufacturing or production environment, • IOSH or equivalent safety certified If you are interested please apply directly or call Tom Kurczab at Right Match Recruitment Group. INDTKJOBS JBRP1_UKTJ

Ernest Gordon Recruitment is seeking a CNC Machinist in Aberdeen for a stable, days-based role with ample overtime opportunities.You will set, operate, and program milling machines and lathes, producing mild steel and aluminium parts for varied industries.The role offers a 39-hour, Monday–Friday d

Ernest Gordon Recruitment is seeking a MIG/TIG Welder for a days-based role in Aberdeen.You will weld on mild steel and aluminium, reading drawings to produce components for diverse projects.Working Monday to Friday, 39 hours with overtime available up to 10 hours per week paid at time and a half; t

Ernest Gordon Recruitment is seeking a skilled CNC Machinist in Aberdeen to set, operate and program milling machines and lathes.

Join Northgate in this fantastic opportunity, as a Vehicle Technician at our busy workshop in Aberdeen. At Northgate Vehicle Hire you’ll be working in aclean, modern workshop environment with the right equipment, systems and support to do the job properly. We invest heavily in our technicians through our IMI-accredited training academy, giving you the opportunity to upskill into Hybrid & EV, electrics, braking systems, tail lifts and more. There are clear progression routes for technicians who don’t want to stay on the tools forever, with opportunities to move into senior, specialist or off-the-tools roles as your career develops. Northgate Vehicle Hire is one of the UK’s leading vehicle rental specialists, operating a modern in-house fleet of around 49,000 vans and 19,000 cars across the UK, Ireland and Spain. All work is carried out in our own workshops, giving you variety without the pressure of customer-facing jobs. This role offers fixed day shift hours only, so no nights, no rotating patterns and a proper work-life balance. Overtime is available when required and is paid at time and a half, not flat rate. There are clear progression routes for technicians who don’t want to stay on the tools forever, with opportunities to move into senior, specialist or off-the-tools roles as your career develops. Alongside a strong basic salary and bonus, you’ll get practical benefits technicians actually use, including low-cost vehicle hire, tools and fleet-related perks. If you’re a fully qualified Level 3 Technician or Mechanic looking for stability, progression and day-shift hours in a professional workshop, we’d love to hear from you. An excellent basic salary, but there is much more available at Northgate Vehicle Hire than that. Some of our most popular benefits include (but are not limited to) … • Fantastic bonus scheme (Up to 8% of Salary) (not time saved), • Regular enhanced overtime, paid at time and a half (subject to business needs), • 24 days annual leave rising to 26 with service (+ bank holidays) and an extra day's holiday to celebrate your birthday., • Free life assurance, • Well-being services (incl. Colleague Assistance Programme, Health Cash Plan, Dental Plan & Travel Insurance)., • Exclusive colleague vehicle-leasing schemes, • Pension & save-as-you-earn share scheme., • Our Benefits App offers unlimited access to a vast range of retailer discounts and cashback deals (incl. Tesco, Asda, Curry's, and B&Q & Wickes, to name just a few), • Stream- a Financial Wellbeing app that gives you more control over your pay. Not only does it let you choose when to get paid it also lets you put money aside each month and in addition you can get discounts on your shopping, check what benefits you're eligible for and can even put you in touch with a financial coach! With over 60 branches nationwide, Northgate Vehicle Hire are the UK’s go-to provider of light commercial vehicle rental solutions, partnering with some of the country’s most well-known organisations. We have gained a reputation for being at the forefront of the LCV sector and for helping our customers when they need us most. We’re also part of something bigger - ZIGUP, a leading provider of integrated mobility solutions, supporting customers across the UK, Ireland, and Spain. We are proud to have been awarded a King's Award for Enterprise in 2025, recognised for our commitment to promoting opportunity and supporting social mobility. Unlock your potential in an industry-leading business, surrounded by inspiring individuals and leaders, fuelled by the opportunity to thrive in your career. We’re committed to building a diverse, inclusive, and respectful workplace where everyone can thrive. We actively welcome applications from people of all backgrounds, experiences, identities, and abilities. If you need adjustments at any stage of the recruitment process, just let us know. We’re here to support you. INDNVH #J-18808-Ljbffr

Mobile Electrical Engineer to maintain, inspect and repair electrical systems across multiple client sites in the Aberdeen region.

You will diagnose and repair mechanical, electrical, hydraulic, pneumatic, and control system faults on gas, diesel and electric forklifts, attend reactive breakdowns, and build strong client relationships, with enhanced overtime and 30 days holiday.

Overtime OTE £62,000 + Days Based + Monday to Friday + Company Benefits. Are you a MIG or TIG Welder/Fabricator, looking to join a well-established company, offering a stable, long-term, days-based role, and the opportunity to greatly boost your earnings with plenty of optional overtime?.

The successful candidate will work day shifts from 8am to 4:30pm, with overtime paid at enhanced rates.