Trabajos technical en RainhamCrear alertas

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £45,378 (inclusive of London Weighting Allowance, if applicable), with on-target earnings of up to £57,000, • A guaranteed overtime option to increase your base salary to £44,385, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. Where you’ll work You’ll be part of the Bromley cluster, covering areas like Bromley, Orpington, Beckenham, Chislehurst, Sidcup, Eltham, Woolwich, Greenwich, Lewisham, Peckham, Camberwell. You’ll be out on the road in your local area, working through a clearly planned schedule of appointments - no reactive callouts, just organised, pre‑booked work where you can focus on doing the job properly. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need... Either: NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or 5+ years’ experience as a Vehicle Technician/Mechanic and A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate -enjoy a market-competitive base salary of £45,370, with the opportunity to increase your earnings up to £57,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Roadside Technician Join the team that keeps the UK moving. As a Roadside Technician with a Level 2 Light Vehicle Maintenance qualification (or equilavent) and at least 2 years' experience, you’ll receive: • A market-competitive base salary of £41,600 (inclusive of London Weighting Allowance, if applicable) and a realistic OTE of £66,000, with top-performers earning significantly more through bonuses and enhanced overtime rates., • Start and finish on your driveway. Demand-led shifts averaging 40 hours per week, with optional overtime available. Where you’ll work: You’ll be part of the Bromley cluster, covering areas like Bromley, Orpington, Beckenham, Chislehurst, Sidcup, Eltham, Woolwich, Greenwich, Lewisham, Peckham, Camberwell. We organise work locally so you can start and finish at home, focusing your day on getting members back on the road in your local area. What you’ll need: • A Level 2 light vehicle maintenance qualification (or equivalent), with at least 2 years' post-qualification technical, electrical, and diagnostic experience, • A customer-focused approach, • A full UK driving licence As a Roadside Technician within our Patrol division, you’ll deliver expert mechanical roadside repair, vehicle diagnostics, and emergency breakdown support across the UK. Whether it’s a flat battery, tyre change, or complex fault-finding, you’ll provide quick, confident solutions and reassurance when our members need it most. You’ll start and end your day at home, tackling challenges head-on and making a real impact on the roadside - combining your technical expertise with outstanding member service. We’ll set you up for success from day one, with your own RAC van, fuel card, full uniform, essential tools, and diagnostic kit all provided. The RAC has been a trusted name for over 125 years, combining heritage with innovation. If you're looking for a career in roadside automotive services that’s rewarding, fast-paced, and full of variety - this is it. No CV required when you apply – it's easier than ever to start your journey with us. As a Roadside Technician at RAC, you’ll get benefits that go the extra mile: • Strong base pay – £41,600 (inclusive of LWA) and realistic OTE of £66,000, with top-performers earning significantly more through bonuses and enhanced overtime rates, • Share in our success – Join our colleague share scheme for free to benefit from the future growth of the business, • Free RAC Ultimate breakdown cover – From your very first day, • Car salary sacrifice scheme – Includes electric vehicle options (after 12 months) to help you save on tax, • Generous holidays – 23 days plus bank holidays (rising to 25 with service), • Pension & life cover – Up to 6.5% matched pension contributions and life cover up to 4x your salary (10x with flex benefits), • Wellbeing support – 24/7 confidential support helpline for you and your family, • Exclusive discounts – Save on tools, tech, holidays, and more through our Orange Savings portal Sound like your kind of role? Here’s what we’re after: You’re more than a mechanic. You’re a problem solver, a people person, and a proud ambassador for the RAC. Whether you’re on a busy roadside or a quiet cul-de-sac, you stay calm under pressure and confident in your craft. You thrive on variety. One moment it’s fault diagnostics, the next it’s a flat tyre or battery - no two jobs are the same. You’ll be equipped and ready for every call-out, with the tools, tech, and support to get the job done. You think on your feet. You’ll be trusted to think on your feet and make the right call for each customer. Different fixes, different faces, new challenges every day. Why RAC? For more than 128 years, we’ve been keeping drivers moving, and today we’re trusted by over 15 million members. We’re also trusted by our people, with a 4.5-star Glassdoor rating showing that RAC is a place where support, ambition, and opportunity go hand in hand. We welcome people from every background, value every voice, and back your growth every step of the way. At the RAC, you can bring your full self to work and we’ll be with you every step of the way to help you grow and develop your career.

Join the RAC as a Roadside Technician Join the team that keeps the UK moving. As a Roadside Technician with a Level 2 Light Vehicle Maintenance qualification (or equilavent) and at least 2 years' experience, you’ll receive: • A market-competitive base salary of £41,600 (inclusive of London Weighting Allowance, if applicable) and a realistic OTE of £66,000, with top-performers earning significantly more through bonuses and enhanced overtime rates., • Start and finish on your driveway. Demand-led shifts averaging 40 hours per week, with optional overtime available. Opportunities in London and Greater London:, • Barnet, • Bromley, • Enfield, • Mayfair Stratford What you’ll need:, • A Level 2 light vehicle maintenance qualification (or equivalent), with at least 2 years' post-qualification technical, electrical, and diagnostic experience, • A customer-focused approach, • A full UK driving licence As a Roadside Technician within our Patrol division, you’ll deliver expert mechanical roadside repair, vehicle diagnostics, and emergency breakdown support across the UK. Whether it’s a flat battery, tyre change, or complex fault-finding, you’ll provide quick, confident solutions and reassurance when our members need it most. You’ll start and end your day at home, tackling challenges head-on and making a real impact on the roadside - combining your technical expertise with outstanding member service. We’ll set you up for success from day one, with your own RAC van, fuel card, full uniform, essential tools, and diagnostic kit all provided. The RAC has been a trusted name for over 125 years, combining heritage with innovation. If you're looking for a career in roadside automotive services that’s rewarding, fast-paced, and full of variety - this is it. No CV required when you apply – it's easier than ever to start your journey with us. As a Roadside Technician at RAC, you’ll get benefits that go the extra mile: • Strong base pay – £41,600 (inclusive of LWA) and realistic OTE of £66,000, with top-performers earning significantly more through bonuses and enhanced overtime rates, • Share in our success – Join our colleague share scheme for free to benefit from the future growth of the business, • Free RAC Ultimate breakdown cover – From your very first day, • Car salary sacrifice scheme – Includes electric vehicle options (after 12 months) to help you save on tax, • Generous holidays – 23 days plus bank holidays (rising to 25 with service), • Pension & life cover – Up to 6.5% matched pension contributions and life cover up to 4x your salary (10x with flex benefits), • Wellbeing support – 24/7 confidential support helpline for you and your family, • Exclusive discounts – Save on tools, tech, holidays, and more through our Orange Savings portal Sound like your kind of role? Here’s what we’re after: You’re more than a mechanic. You’re a problem solver, a people person, and a proud ambassador for the RAC. Whether you’re on a busy roadside or a quiet cul-de-sac, you stay calm under pressure and confident in your craft. You thrive on variety. One moment it’s fault diagnostics, the next it’s a flat tyre or battery - no two jobs are the same. You’ll be equipped and ready for every call-out, with the tools, tech, and support to get the job done. You think on your feet. You’ll be trusted to think on your feet and make the right call for each customer. Different fixes, different faces, new challenges every day. Why RAC? For more than 128 years, we’ve been keeping drivers moving, and today we’re trusted by over 15 million members. We’re also trusted by our people, with a 4.5-star Glassdoor rating showing that RAC is a place where support, ambition, and opportunity go hand in hand. We welcome people from every background, value every voice, and back your growth every step of the way. At the RAC, you can bring your full self to work and we’ll be with you every step of the way to help you grow and develop your career.

Join the RAC as a Roadside Technician Join the team that keeps the UK moving. As a Roadside Technician with a Level 2 Light Vehicle Maintenance qualification (or equilavent) and at least 2 years' experience, you’ll receive: • A market-competitive base salary of £41,600 (inclusive of London Weighting Allowance, if applicable) and a realistic OTE of £66,000, with top-performers earning significantly more through bonuses and enhanced overtime rates., • Start and finish on your driveway. Demand-led shifts averaging 40 hours per week, with optional overtime available. Opportunities in London and Greater London:, • Barnet, • Bromley, • Enfield, • Mayfair Stratford What you’ll need:, • A Level 2 light vehicle maintenance qualification (or equivalent), with at least 2 years' post-qualification technical, electrical, and diagnostic experience, • A customer-focused approach, • A full UK driving licence As a Roadside Technician within our Patrol division, you’ll deliver expert mechanical roadside repair, vehicle diagnostics, and emergency breakdown support across the UK. Whether it’s a flat battery, tyre change, or complex fault-finding, you’ll provide quick, confident solutions and reassurance when our members need it most. You’ll start and end your day at home, tackling challenges head-on and making a real impact on the roadside - combining your technical expertise with outstanding member service. We’ll set you up for success from day one, with your own RAC van, fuel card, full uniform, essential tools, and diagnostic kit all provided. The RAC has been a trusted name for over 125 years, combining heritage with innovation. If you're looking for a career in roadside automotive services that’s rewarding, fast-paced, and full of variety - this is it. No CV required when you apply – it's easier than ever to start your journey with us. As a Roadside Technician at RAC, you’ll get benefits that go the extra mile: • Strong base pay – £41,600 (inclusive of LWA) and realistic OTE of £66,000, with top-performers earning significantly more through bonuses and enhanced overtime rates, • Share in our success – Join our colleague share scheme for free to benefit from the future growth of the business, • Free RAC Ultimate breakdown cover – From your very first day, • Car salary sacrifice scheme – Includes electric vehicle options (after 12 months) to help you save on tax, • Generous holidays – 23 days plus bank holidays (rising to 25 with service), • Pension & life cover – Up to 6.5% matched pension contributions and life cover up to 4x your salary (10x with flex benefits), • Wellbeing support – 24/7 confidential support helpline for you and your family, • Exclusive discounts – Save on tools, tech, holidays, and more through our Orange Savings portal Sound like your kind of role? Here’s what we’re after: You’re more than a mechanic. You’re a problem solver, a people person, and a proud ambassador for the RAC. Whether you’re on a busy roadside or a quiet cul-de-sac, you stay calm under pressure and confident in your craft. You thrive on variety. One moment it’s fault diagnostics, the next it’s a flat tyre or battery - no two jobs are the same. You’ll be equipped and ready for every call-out, with the tools, tech, and support to get the job done. You think on your feet. You’ll be trusted to think on your feet and make the right call for each customer. Different fixes, different faces, new challenges every day. Why RAC? For more than 128 years, we’ve been keeping drivers moving, and today we’re trusted by over 15 million members. We’re also trusted by our people, with a 4.5-star Glassdoor rating showing that RAC is a place where support, ambition, and opportunity go hand in hand. We welcome people from every background, value every voice, and back your growth every step of the way. At the RAC, you can bring your full self to work and we’ll be with you every step of the way to help you grow and develop your career.

Join the RAC as a Roadside Technician Join the team that keeps the UK moving. As a Roadside Technician with a Level 2 Light Vehicle Maintenance qualification (or equilavent) and at least 2 years' experience, you’ll receive: • A market-competitive base salary of £41,600 (inclusive of London Weighting Allowance, if applicable) and a realistic OTE of £66,000, with top-performers earning significantly more through bonuses and enhanced overtime rates., • Start and finish on your driveway. Demand-led shifts averaging 40 hours per week, with optional overtime available. Where you’ll work: You’ll be part of the Bromley cluster, covering areas like Bromley, Orpington, Beckenham, Chislehurst, Sidcup, Eltham, Woolwich, Greenwich, Lewisham, Peckham, Camberwell. We organise work locally so you can start and finish at home, focusing your day on getting members back on the road in your local area. What you’ll need: • A Level 2 light vehicle maintenance qualification (or equivalent), with at least 2 years' post-qualification technical, electrical, and diagnostic experience, • A customer-focused approach, • A full UK driving licence As a Roadside Technician within our Patrol division, you’ll deliver expert mechanical roadside repair, vehicle diagnostics, and emergency breakdown support across the UK. Whether it’s a flat battery, tyre change, or complex fault-finding, you’ll provide quick, confident solutions and reassurance when our members need it most. You’ll start and end your day at home, tackling challenges head-on and making a real impact on the roadside - combining your technical expertise with outstanding member service. We’ll set you up for success from day one, with your own RAC van, fuel card, full uniform, essential tools, and diagnostic kit all provided. The RAC has been a trusted name for over 125 years, combining heritage with innovation. If you're looking for a career in roadside automotive services that’s rewarding, fast-paced, and full of variety - this is it. No CV required when you apply – it's easier than ever to start your journey with us. As a Roadside Technician at RAC, you’ll get benefits that go the extra mile: • Strong base pay – £41,600 (inclusive of LWA) and realistic OTE of £66,000, with top-performers earning significantly more through bonuses and enhanced overtime rates, • Share in our success – Join our colleague share scheme for free to benefit from the future growth of the business, • Free RAC Ultimate breakdown cover – From your very first day, • Car salary sacrifice scheme – Includes electric vehicle options (after 12 months) to help you save on tax, • Generous holidays – 23 days plus bank holidays (rising to 25 with service), • Pension & life cover – Up to 6.5% matched pension contributions and life cover up to 4x your salary (10x with flex benefits), • Wellbeing support – 24/7 confidential support helpline for you and your family, • Exclusive discounts – Save on tools, tech, holidays, and more through our Orange Savings portal Sound like your kind of role? Here’s what we’re after: You’re more than a mechanic. You’re a problem solver, a people person, and a proud ambassador for the RAC. Whether you’re on a busy roadside or a quiet cul-de-sac, you stay calm under pressure and confident in your craft. You thrive on variety. One moment it’s fault diagnostics, the next it’s a flat tyre or battery - no two jobs are the same. You’ll be equipped and ready for every call-out, with the tools, tech, and support to get the job done. You think on your feet. You’ll be trusted to think on your feet and make the right call for each customer. Different fixes, different faces, new challenges every day. Why RAC? For more than 128 years, we’ve been keeping drivers moving, and today we’re trusted by over 15 million members. We’re also trusted by our people, with a 4.5-star Glassdoor rating showing that RAC is a place where support, ambition, and opportunity go hand in hand. We welcome people from every background, value every voice, and back your growth every step of the way. At the RAC, you can bring your full self to work and we’ll be with you every step of the way to help you grow and develop your career.

Join the RAC as a Roadside Technician Join the team that keeps the UK moving. As a Roadside Technician with a Level 2 Light Vehicle Maintenance qualification (or equilavent) and at least 2 years' experience, you’ll receive: • A market-competitive base salary of £41,600 (inclusive of London Weighting Allowance, if applicable) and a realistic OTE of £66,000, with top-performers earning significantly more through bonuses and enhanced overtime rates., • Start and finish on your driveway. Demand-led shifts averaging 40 hours per week, with optional overtime available. Opportunities in London and Greater London:, • Barnet, • Bromley, • Enfield, • Mayfair Stratford What you’ll need:, • A Level 2 light vehicle maintenance qualification (or equivalent), with at least 2 years' post-qualification technical, electrical, and diagnostic experience, • A customer-focused approach, • A full UK driving licence As a Roadside Technician within our Patrol division, you’ll deliver expert mechanical roadside repair, vehicle diagnostics, and emergency breakdown support across the UK. Whether it’s a flat battery, tyre change, or complex fault-finding, you’ll provide quick, confident solutions and reassurance when our members need it most. You’ll start and end your day at home, tackling challenges head-on and making a real impact on the roadside - combining your technical expertise with outstanding member service. We’ll set you up for success from day one, with your own RAC van, fuel card, full uniform, essential tools, and diagnostic kit all provided. The RAC has been a trusted name for over 125 years, combining heritage with innovation. If you're looking for a career in roadside automotive services that’s rewarding, fast-paced, and full of variety - this is it. No CV required when you apply – it's easier than ever to start your journey with us. As a Roadside Technician at RAC, you’ll get benefits that go the extra mile: • Strong base pay – £41,600 (inclusive of LWA) and realistic OTE of £66,000, with top-performers earning significantly more through bonuses and enhanced overtime rates, • Share in our success – Join our colleague share scheme for free to benefit from the future growth of the business, • Free RAC Ultimate breakdown cover – From your very first day, • Car salary sacrifice scheme – Includes electric vehicle options (after 12 months) to help you save on tax, • Generous holidays – 23 days plus bank holidays (rising to 25 with service), • Pension & life cover – Up to 6.5% matched pension contributions and life cover up to 4x your salary (10x with flex benefits), • Wellbeing support – 24/7 confidential support helpline for you and your family, • Exclusive discounts – Save on tools, tech, holidays, and more through our Orange Savings portal Sound like your kind of role? Here’s what we’re after: You’re more than a mechanic. You’re a problem solver, a people person, and a proud ambassador for the RAC. Whether you’re on a busy roadside or a quiet cul-de-sac, you stay calm under pressure and confident in your craft. You thrive on variety. One moment it’s fault diagnostics, the next it’s a flat tyre or battery - no two jobs are the same. You’ll be equipped and ready for every call-out, with the tools, tech, and support to get the job done. You think on your feet. You’ll be trusted to think on your feet and make the right call for each customer. Different fixes, different faces, new challenges every day. Why RAC? For more than 128 years, we’ve been keeping drivers moving, and today we’re trusted by over 15 million members. We’re also trusted by our people, with a 4.5-star Glassdoor rating showing that RAC is a place where support, ambition, and opportunity go hand in hand. We welcome people from every background, value every voice, and back your growth every step of the way. At the RAC, you can bring your full self to work and we’ll be with you every step of the way to help you grow and develop your career.

Join the RAC as a Roadside Technician Join the team that keeps the UK moving. As a Roadside Technician with a Level 2 Light Vehicle Maintenance qualification (or equilavent) and at least 2 years' experience, you’ll receive: • A market-competitive base salary of £41,600 (inclusive of London Weighting Allowance, if applicable) and a realistic OTE of £66,000, with top-performers earning significantly more through bonuses and enhanced overtime rates., • Start and finish on your driveway. Demand-led shifts averaging 40 hours per week, with optional overtime available. Where you’ll work: You’ll be part of the Bromley cluster, covering areas like Bromley, Orpington, Beckenham, Chislehurst, Sidcup, Eltham, Woolwich, Greenwich, Lewisham, Peckham, Camberwell. We organise work locally so you can start and finish at home, focusing your day on getting members back on the road in your local area. What you’ll need: • A Level 2 light vehicle maintenance qualification (or equivalent), with at least 2 years' post-qualification technical, electrical, and diagnostic experience, • A customer-focused approach, • A full UK driving licence As a Roadside Technician within our Patrol division, you’ll deliver expert mechanical roadside repair, vehicle diagnostics, and emergency breakdown support across the UK. Whether it’s a flat battery, tyre change, or complex fault-finding, you’ll provide quick, confident solutions and reassurance when our members need it most. You’ll start and end your day at home, tackling challenges head-on and making a real impact on the roadside - combining your technical expertise with outstanding member service. We’ll set you up for success from day one, with your own RAC van, fuel card, full uniform, essential tools, and diagnostic kit all provided. The RAC has been a trusted name for over 125 years, combining heritage with innovation. If you're looking for a career in roadside automotive services that’s rewarding, fast-paced, and full of variety - this is it. No CV required when you apply – it's easier than ever to start your journey with us. As a Roadside Technician at RAC, you’ll get benefits that go the extra mile: • Strong base pay – £41,600 (inclusive of LWA) and realistic OTE of £66,000, with top-performers earning significantly more through bonuses and enhanced overtime rates, • Share in our success – Join our colleague share scheme for free to benefit from the future growth of the business, • Free RAC Ultimate breakdown cover – From your very first day, • Car salary sacrifice scheme – Includes electric vehicle options (after 12 months) to help you save on tax, • Generous holidays – 23 days plus bank holidays (rising to 25 with service), • Pension & life cover – Up to 6.5% matched pension contributions and life cover up to 4x your salary (10x with flex benefits), • Wellbeing support – 24/7 confidential support helpline for you and your family, • Exclusive discounts – Save on tools, tech, holidays, and more through our Orange Savings portal Sound like your kind of role? Here’s what we’re after: You’re more than a mechanic. You’re a problem solver, a people person, and a proud ambassador for the RAC. Whether you’re on a busy roadside or a quiet cul-de-sac, you stay calm under pressure and confident in your craft. You thrive on variety. One moment it’s fault diagnostics, the next it’s a flat tyre or battery - no two jobs are the same. You’ll be equipped and ready for every call-out, with the tools, tech, and support to get the job done. You think on your feet. You’ll be trusted to think on your feet and make the right call for each customer. Different fixes, different faces, new challenges every day. Why RAC? For more than 128 years, we’ve been keeping drivers moving, and today we’re trusted by over 15 million members. We’re also trusted by our people, with a 4.5-star Glassdoor rating showing that RAC is a place where support, ambition, and opportunity go hand in hand. We welcome people from every background, value every voice, and back your growth every step of the way. At the RAC, you can bring your full self to work and we’ll be with you every step of the way to help you grow and develop your career.

Join the RAC as a Roadside Technician Join the team that keeps the UK moving. As a Roadside Technician with a Level 2 Light Vehicle Maintenance qualification (or equilavent) and at least 2 years' experience, you’ll receive: • A market-competitive base salary of £41,600 (inclusive of London Weighting Allowance, if applicable) and a realistic OTE of £66,000, with top-performers earning significantly more through bonuses and enhanced overtime rates., • Start and finish on your driveway. Demand-led shifts averaging 40 hours per week, with optional overtime available. Where you’ll work: You’ll be part of the Bromley cluster, covering areas like Bromley, Orpington, Beckenham, Chislehurst, Sidcup, Eltham, Woolwich, Greenwich, Lewisham, Peckham, Camberwell. We organise work locally so you can start and finish at home, focusing your day on getting members back on the road in your local area. What you’ll need: • A Level 2 light vehicle maintenance qualification (or equivalent), with at least 2 years' post-qualification technical, electrical, and diagnostic experience, • A customer-focused approach, • A full UK driving licence As a Roadside Technician within our Patrol division, you’ll deliver expert mechanical roadside repair, vehicle diagnostics, and emergency breakdown support across the UK. Whether it’s a flat battery, tyre change, or complex fault-finding, you’ll provide quick, confident solutions and reassurance when our members need it most. You’ll start and end your day at home, tackling challenges head-on and making a real impact on the roadside - combining your technical expertise with outstanding member service. We’ll set you up for success from day one, with your own RAC van, fuel card, full uniform, essential tools, and diagnostic kit all provided. The RAC has been a trusted name for over 125 years, combining heritage with innovation. If you're looking for a career in roadside automotive services that’s rewarding, fast-paced, and full of variety - this is it. No CV required when you apply – it's easier than ever to start your journey with us. As a Roadside Technician at RAC, you’ll get benefits that go the extra mile: • Strong base pay – £41,600 (inclusive of LWA) and realistic OTE of £66,000, with top-performers earning significantly more through bonuses and enhanced overtime rates, • Share in our success – Join our colleague share scheme for free to benefit from the future growth of the business, • Free RAC Ultimate breakdown cover – From your very first day, • Car salary sacrifice scheme – Includes electric vehicle options (after 12 months) to help you save on tax, • Generous holidays – 23 days plus bank holidays (rising to 25 with service), • Pension & life cover – Up to 6.5% matched pension contributions and life cover up to 4x your salary (10x with flex benefits), • Wellbeing support – 24/7 confidential support helpline for you and your family, • Exclusive discounts – Save on tools, tech, holidays, and more through our Orange Savings portal Sound like your kind of role? Here’s what we’re after: You’re more than a mechanic. You’re a problem solver, a people person, and a proud ambassador for the RAC. Whether you’re on a busy roadside or a quiet cul-de-sac, you stay calm under pressure and confident in your craft. You thrive on variety. One moment it’s fault diagnostics, the next it’s a flat tyre or battery - no two jobs are the same. You’ll be equipped and ready for every call-out, with the tools, tech, and support to get the job done. You think on your feet. You’ll be trusted to think on your feet and make the right call for each customer. Different fixes, different faces, new challenges every day. Why RAC? For more than 128 years, we’ve been keeping drivers moving, and today we’re trusted by over 15 million members. We’re also trusted by our people, with a 4.5-star Glassdoor rating showing that RAC is a place where support, ambition, and opportunity go hand in hand. We welcome people from every background, value every voice, and back your growth every step of the way. At the RAC, you can bring your full self to work and we’ll be with you every step of the way to help you grow and develop your career.

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £45,378 (inclusive of London Weighting Allowance, if applicable), with on-target earnings of up to £57,000, • A guaranteed overtime option to increase your base salary to £44,385, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. Where you’ll work You’ll be part of the Bromley cluster, covering areas like Bromley, Orpington, Beckenham, Chislehurst, Sidcup, Eltham, Woolwich, Greenwich, Lewisham, Peckham, Camberwell. You’ll be out on the road in your local area, working through a clearly planned schedule of appointments - no reactive callouts, just organised, pre‑booked work where you can focus on doing the job properly. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need... Either: NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or 5+ years’ experience as a Vehicle Technician/Mechanic and A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate -enjoy a market-competitive base salary of £45,370, with the opportunity to increase your earnings up to £57,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £45,378 (inclusive of London Weighting Allowance, if applicable), with on-target earnings of up to £57,000, • A guaranteed overtime option to increase your base salary to £44,385, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. Where you’ll work You’ll be part of the Bromley cluster, covering areas like Bromley, Orpington, Beckenham, Chislehurst, Sidcup, Eltham, Woolwich, Greenwich, Lewisham, Peckham, Camberwell. You’ll be out on the road in your local area, working through a clearly planned schedule of appointments - no reactive callouts, just organised, pre‑booked work where you can focus on doing the job properly. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need... Either: NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or 5+ years’ experience as a Vehicle Technician/Mechanic and A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate -enjoy a market-competitive base salary of £45,370, with the opportunity to increase your earnings up to £57,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Crane Engineer Location: ErithHours: 39 hours per week, Monday to Friday, including Speedy Work Life Balance (SWLB)Flexible working options available, including job shares and amended hours. We are committed to supporting a healthy work-life balance. At Lloyds British , part of the Speedy Hire Group , we are one of the UK's leading providers of inspection, testing, certification and maintenance services. Our highly skilled Crane Engineers play a vital role in helping customers maintain safe, compliant and reliable lifting equipment across a wide range of industries.We're looking for an experienced Crane Engineer to join our team in Erith. If you're passionate about engineering, enjoy problem solving and take pride in delivering outstanding customer service, we'd love to hear from you.As a Crane Engineer, you'll be responsible for the inspection, servicing, maintenance and repair of overhead travelling cranes, hoists and associated lifting equipment. Working across a variety of customer sites, you'll ensure equipment remains safe, compliant and fully operational while building strong relationships with customers through your technical expertise and professional approach.Health and safety will always be your number one priority as you deliver a first-class service that helps our customers meet their statutory obligations and minimise downtime.Your responsibilities will include:Carrying out routine servicing, inspection and maintenance of overhead cranes and hoists.Diagnosing faults and carrying out repairs to minimise equipment downtime.Completing preventative maintenance activities to improve equipment reliability.Undertaking fault finding, retrofits, modernisations and equipment upgrades.Working in accordance with LOLER, PUWER and all relevant health and safety legislation.Producing accurate service reports and communicating technical recommendations to customers.Building strong customer relationships by providing expert advice and excellent service.Working safely at height and following all Lloyds British safety procedures.What We're Looking ForYou'll be a qualified engineer with strong electrical and mechanical knowledge and experience working on cranes, hoists or similar lifting equipment.Essential requirements include:NVQ Level 3, HNC, HND or City & Guilds qualification in Electrical Engineering or a related discipline.Previous experience maintaining, servicing or repairing overhead cranes and hoists.Good understanding of LOLER and PUWER regulations.Strong fault-finding and diagnostic skills.Full UK driving licence.Comfortable working at height.You'll also demonstrate:Excellent customer service and communication skills.A proactive approach to problem solving.Strong organisational skills and attention to detail.The ability to work independently and as part of a wider engineering team.A commitment to supporting Lloyds British's ESG Strategy Decade to Deliver .What We Offer26 days annual leave plus bank holidays.Competitive pension scheme.Life assurance.Company vehicle, tools and specialist equipment.95% employee discount across the Speedy Hire Group.Ongoing technical training through our in-house Academy, OEM partners and LEEA Advanced courses.Excellent opportunities for career progression across Lloyds British and the wider Speedy Hire Group.My Staff Shop discounts across hundreds of retailers.Green Commute Initiative Cycle to Work Scheme.PAM Employee Assistance Programme, providing free and confidential wellbeing, legal and financial support.Speedy Work Life Balance (SWLB), supporting a healthier balance between work and personal life.Career Line of Sight, providing clear development pathways and progression opportunities.Why Lloyds British?Our engineers are at the heart of everything we do. We invest heavily in training, development and career progression, ensuring you have the skills, support and opportunities to build a long and rewarding career with us.If you're looking to join a business where safety, quality and people come first, we'd love to hear from you.Please note: We reserve the right to close this vacancy early should we receive a high volume of suitable applications. We encourage candidates to apply as soon as possible.All offers of employment are subject to satisfactory pre-employment checks, which may include Right to Work verification, references and, where applicable, DBS, credit or security clearance checks.Lloyds British, part of the Speedy Hire Group, is proud to be an equal opportunities employer. We celebrate diversity and are committed to creating an inclusive workplace where everyone can thrive. We welcome applications from all suitably qualified candidates regardless of age, disability, ethnicity, religion or belief, sex, sexual orientation, gender identity, marital status, pregnancy or maternity, neurodiversity or veteran status.All roles require proof of the right to work in the UK before employment commences.TPBN1_UKTJ

Reference: 4799356Job ID: 5395025Posted: 2026-07-30Closing date: 2026-08-09Location: DartfordSalary: To 80000 + package DOE (per annum)Job type: PermanentWorking pattern: Full timeIndustry: Construction / Construction - Building ProjectsCompany: HaysConsultant: Matt StoneHays office: Maidstone — Unit 24, Hollingworth Court, Turkey Mill, Ashford RoadPhone: 02084646678Email: matthew.stone@hays.comYour new company You will be joining a well-established and growing specialist contractor based in Dartford. The organisation delivers high-quality fencing, groundworks, hoarding and temporary work's solutions across a diverse range of sectors, including education, infrastructure, industrial, data centres and government environments. The business has built a strong reputation for technical expertise and long-standing client relationships, operating across multiple projects typically ranging in value from 50k to 1m Your new role As an Intermediate to Senior Quantity Surveyor, you will be responsible for the commercial management of multiple projects concurrently, ensuring strong financial performance and contractual compliance throughout the project Life cycle.Key responsibilities will include:Reviewing and negotiating subcontract terms and conditionsPreparing and managing monthly applications for payment, ensuring timely certification and receiptIdentifying, pricing and agreeing variations with client representativesPreparing and agreeing final accountsManaging and negotiating extensions of timeProducing accurate monthly cost reports, including Work in Progress and accrualsMaintaining regular client liaison and stakeholder communicationWorking closely with operational teams, including Contracts Managers, site teams and internal finance functions What you'll need to succeedA minimum of 5 years’ experience in a Quantity Surveying roleExperience within a main contractor or relevant specialist subcontractor environment (groundworks/Fencing/Externals)Proven capability in managing multiple small to medium-sized projects simultaneouslyA strong working knowledge of JCT forms of contract Experience delivering projects typically valued between 50k and 1m A professional, adaptable and commercially astute approachStrong negotiation, communication and stakeholder management skillsWhat you'll get in returnCompetitive salary unto 60k + packageCompany car or car allowanceOpportunity to work within a specialist, technically focused sectorExposure to a varied and interesting portfolio of projectsA collaborative working environment with clear opportunities for progressionWhat you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. #4799356 - Matt Stone

Position: Quantity Surveyor Location: Dartford & London / M25 Projects Salary: £40,000 - £70,000 + Car AllowanceBennett & Game are representing one of the UK's fastest-growing faade remediation and building safety Main Contractors who are seeking a Quantity Surveyor to join their expanding Southern division.With almost 30 years of specialist expertise, the business has built an outstanding reputation delivering complex faade remediation, cladding replacement, fire safety and external refurbishment projects across the UK. Having already secured approximately three years of confirmed work, turnover has increased from £32m to around £45m this year, with ambitions to exceed £55m next year. Their Southern region has grown rapidly over the past 12 months and continues to expand as they secure major remediation schemes across London and the M25, alongside an increasing portfolio of photovoltaic (PV) installations as part of wider building safety and sustainability programmes.This is an excellent opportunity to join a contractor at an exciting stage of growth where your career can develop alongside the business. Whether you're an Assistant Quantity Surveyor ready to step up or an established Quantity Surveyor looking for your next challenge, you'll gain exposure to high-value faade remediation and building safety projects within a collaborative, modern working environment. The company is open to candidates from both Main Contractor and Specialist Subcontractor backgrounds and places as much value on attitude and potential as previous sector experience. Genuine progression opportunities exist as the Southern division continues its rapid expansion.Salary & Benefits Salary of £40,000 - £70,000 depending on experience Car allowance Pension scheme Life assurance (2x annual salary) 24/25 days holiday plus bank holidays, with additional company-contributed Christmas shutdown days where applicable Modern, supportive working environment with high-spec IT equipment, complimentary refreshments and genuine long-term career progressionQuantity Surveyor Position Overview Manage the commercial aspects of faade remediation, cladding replacement and building safety projects across London and the M25 corridor Prepare valuations, applications for payment, cost reports, variations and final accounts Manage subcontractor procurement, payments and commercial administration throughout project delivery Monitor project costs, forecasts and commercial performance to maximise project profitability Work closely with Project Managers and operational teams to ensure successful commercial delivery of projects Develop your commercial expertise within a rapidly expanding contractor delivering prestigious remediation and building safety schemesQuantity Surveyor Position Requirements Open to Assistant Quantity Surveyors looking to step up into a Quantity Surveyor position, as well as experienced Quantity Surveyors Experience working for either a Main Contractor or Specialist Subcontractor Experience within faade remediation, cladding or the external envelope sector would be advantageous, although candidates with strong general contracting experience will also be considered Degree qualified in Quantity Surveying or a related construction discipline preferred Full UK Driving Licence and willingness to travel to projects across London and the M25 corridor as required Looking to join a rapidly growing contractor offering genuine long-term career progression, job security and exposure to high-profile building safety projectsBennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries.We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.TPBN1_UKTJ

Location: Hybrid - Split between either the Northern or South West England office and client visits/home-working.An established and fast-growing manufacturer within the construction materials sector is seeking a Architect Specifications Manager to drive product specification across the architectural and design community. This is a field-based, relationship-led role focused on engaging with architects, specifiers, main contractors and specialist subcontractors to ensure products are specified at the design stage of commercial and residential developments. Working across a portfolio of market-leading surfacing solutions, the successful candidate will act as a trusted technical advisor, supporting projects from early design concept through to installation and completion, while actively protecting and growing specification-led sales opportunities.Key Responsibilities Develop and manage relationships with architects, landscape architects, specifiers, designers, main contractors and specialist subcontractors. Drive product specification across commercial, residential, public realm, education, healthcare and infrastructure projects. Promote brand awareness and increase specification rates within the architectural and construction supply chain. Deliver CPD presentations, technical seminars and product demonstrations to design and construction professionals. Identify, track and manage projects from early design stage through to completion to maximise specification conversion. Provide technical specification support including drawings, product guidance, compliance advice and supporting documentation. Take ownership of specified projects, maintaining engagement through procurement, contractor appointment and installation stages. Work closely with internal sales, technical and marketing teams to support project delivery and pipeline conversion. Maintain accurate CRM records and provide reporting on pipeline activity, specifications and conversion rates. Monitor competitor activity, market trends and emerging opportunities within the construction and built environment sectors. Represent the business at industry events, exhibitions and networking forums to strengthen market presence and relationships. Support ongoing growth and integration of product ranges within the specification market.Candidate Profile The ideal candidate will be an experienced specification-led sales professional from the construction, building materials or architectural products sector. They will bring: Experience in specification sales, technical sales or architectural sales within construction or building products. Proven ability to build relationships with architects, designers and contractors. Experience delivering CPD presentations or technical product education (desirable). Strong understanding of the construction project lifecycle and specification process. Ability to manage multiple live projects and maintain long-term pipeline visibility. Strong communication and presentation skills with the ability to influence technical and commercial stakeholders. Commercial awareness and a track record of driving specification-led revenue. High levels of self-motivation, organisation and autonomy in a field-based role. Strong attention to detail and ability to manage technical documentation and project information. Experience using CRM systems and managing structured sales pipelines. Full UK driving licence and willingness to travel nationally.This is a high-impact specification role within a growing construction materials manufacturer, offering the opportunity to work with established products while shaping specification strategy in the market. The role offers strong autonomy, national exposure to key architectural and construction stakeholders, and the chance to influence projects at the earliest and most valuable stage of the build process - where design decisions directly determine commercial outcomes.TPBN1_UKTJ

Immediate Starts | Full-Time, Ongoing Work | Competitive Pay RatesStaffline is recruiting full-time HGV Class 1 drivers for a well-established client based in Dartford. This is an excellent opportunity to secure long-term, stable work with competitive pay and flexible shift patterns.Pay Rates (PAYE - After 12 Weeks Parity Pay)- Mornings (04:00 - 09:59): £25.74 per hour- Days (10:00 - 15:59): £26.73 per hour- Nights (16:00 - 03:59): £27.70 per hour- Overtime (after 45 hours a week):- Mornings: £38.61 per hour- Days: £40.10 per hour- Nights: £41.55 per hourYour Time at WorkRole Responsibilities- Supermarket store deliveries across the South East.- Operating safely and efficiently while ensuring compliance with health and safety regulations.- Long-term assignments with consistent shift patterns available.Our Perfect WorkerRequirements- Minimum 12 months of HGV Class 1 driving experience.- Driven an articulated vehicle for at least 180 days within the last 24 months.- Valid Digi card & DCPC.- Maximum of 6 points on licence (no DR, DD, IN, or TT offences).Key Information and Benefits- Full-time ongoing work with a guaranteed minimum of 8 hours pay per shift (typical shift length 10-11.5 hours).- Shifts available across all start times, 7 days a week.- Regular weekend work available.- Immediate assessments available - paid induction upon successful completion.- Modern fleet with excellent working conditions.- Earn up to £39.72 per hour.- Weekly pay.- On-site support from Staffline.- Canteen & free parking available.- Immediate starts with long-term stability.Part-time HGV Class 1 drivers are also welcome - flexible ad hoc shifts available.Job Ref - D1WINSDFollow our Driving Facebook page and click on LikeSearch: Staffline DrivingAbout StafflineStaffline is the UK's largest recruitment solutions partner, enabling over 35,000 people into good work every week. We operate at more than 420 customer sites across England, Scotland and Wales.As one of the most established recruitment agencies in Nottingham with operations across the UK, we specialise in connecting businesses with temporary and permanent jobs across warehouse & logistics, food and drink, aviation, driving, technical & engineering, manufacturing & automotive and security.Important Information- Staffline and its subsidiaries do not charge any recruitment or job-seeking fees at any stage of the hiring process.- This job advert may not be copied, imitated, or used, in whole or in part, by third-party websites, without prior written consent from Staffline.- Our job adverts are correct at the time of publication, but some details and job responsibilities are subject to change.TPBN1_UKTJ

Workshop Controller Location: Rainham, EssexSalary: £40,000 - £50,000 DOEBonus: Monthly performance bonus averaging £300 per monthHours: Monday to Saturday (with one weekday off)Lead From the Front in a Busy, High-Performing Workshop Our client is a well-established and highly respected independent automotive business looking to recruit an experienced Workshop Controller to join their leadership team.This is an excellent opportunity for a qualified technician who is ready to take the next step in their career or an experienced Workshop Controller looking for a fresh challenge.The successful candidate will play a pivotal role in the day-to-day running of the workshop, ensuring work is planned efficiently, technicians remain productive, and customers receive an exceptional level of service. This is a hands-on role, so alongside leading the workshop, you'll also be expected to carry out vehicle repairs and diagnostics when required.The Role Working closely with the Service Advisors and management team, you'll act as the link between the front-of-house operation and the workshop, ensuring work is allocated efficiently, productivity is maximised and repair quality remains consistently high.You'll be responsible for organising the daily workflow, supporting and motivating the technician team, monitoring workshop performance and ensuring all jobs are completed safely, efficiently and to the highest standard.Key Responsibilities Organise and prioritise the daily workshop schedule.Allocate jobs effectively to maximise workshop efficiency and productivity.Support and manage a team of technicians, providing guidance and technical assistance where required.Monitor job progress and ensure work is completed within agreed timescales.Carry out diagnostics, servicing and vehicle repairs when required.Ensure all repairs are completed to manufacturer and company standards.Liaise closely with the front-of-house team regarding job progress and customer updates.Maintain high standards of workshop housekeeping and health & safety.Drive workshop efficiency, productivity and first-time fix rates.Support training and development of technicians within the workshop.About You We're looking for a natural leader who enjoys developing people and leading by example.You'll ideally have:NVQ Level 3 (or equivalent) in Light Vehicle Maintenance and Repair.Previous experience as a Workshop Controller, Senior Technician or Master Technician.Strong diagnostic and technical ability.Excellent organisational and planning skills.Experience managing workflow within a busy automotive workshop.The ability to motivate and support a team of technicians.Excellent communication skills.A proactive, positive and customer-focused approach.Full UK Driving Licence.What's on Offer? £40,000 - £50,000 basic salary depending on experience.Monthly bonus averaging £300 per month .One weekday off every week.Stable, full-time permanent position.Opportunity to join a successful, growing business.Supportive management team.Modern, well-equipped workshop.Career progression opportunities.Lunch provided for the team during the working week.Breakfast provided every Saturday for the whole team.Why Join? This is a business that genuinely values its people. You'll be joining a close-knit team where everyone pulls together, hard work is recognised and rewarded, and management actively invests in creating a positive working environment.If you're a qualified technician with strong leadership skills and you're ready to take ownership of a busy workshop while remaining hands-on with the tools, we'd love to hear from you.Apply today for a confidential conversation with Swipe Right Recruitment.TPBN1_UKTJ

CNC Operator Rate: £20 - £24.00 per hour (DOE)We're recruiting for an experienced CNC Operator to join a leading bespoke joinery manufacturer producing high-quality furniture, interiors and joinery for commercial, hospitality, retail and workplace projects.Working within a modern manufacturing facility, you'll be responsible for operating CNC machinery to produce components while ensuring the highest standards of quality, efficiency and accuracy.The RoleSet up and operate CNC machinery.Manufacture bespoke joinery components from technical drawings and production schedules.Load materials and monitor machining processes.Carry out tool changes, machine adjustments and quality inspections.Work closely with the workshop team to meet production deadlines.Maintain machinery and ensure a clean, safe working environment.RequirementsPrevious experience operating CNC woodworking machinery within a joinery or cabinet manufacturing environment.Ability to read and interpret technical drawings.Experience with CNC software such as Cabinet Vision, WoodWOP, AlphaCAM, BiesseWorks or similar would be advantageous.Strong attention to detail and commitment to producing high-quality work.Good understanding of woodworking materials and machining processes.Reliable, proactive and able to work effectively as part of a team.This is an excellent opportunity to join a well-established bespoke joinery manufacturer delivering high-end projects.TPBN1_UKTJ

ELECTRICAL TEST & INSPECTORCOMPANY OVERVIEWOne of the UK's leading providers of electrical safety services, specifically inspection and testing of fixed installations. Due to continued growth, they are now looking for a Electrical Test & Inspector in the Dartford area.COMPANY USP'SCollectively 120 years management experience in advising on Safe Places at work, Safe Systems at work & Safe People at work'Industry Authority - authors of practical guidance to assist Duty Holders on meeting the demands of EaWR1989Technological Pioneers - Development of on-site & on-line technology to enable immediate client access & update of records, regardless of locationInspection & testing work carried out in pairs93% client retentionBlue Chip Client base - Industrial, Manufacturing, Pharmaceutical, Healthcare, Aerospace, Food & Drink, Sports & Leisure, Education. No High St retail or domesticPURPOSE OF AN ELECTRICAL INSPECTORWe are seeking a highly skilled and detail-oriented Electrical Inspector to join our client's team in the Dartford area.The successful candidate will be responsible for conducting Electrical Installation Condition Reports (EICRs) in various commercial and industrial settings.This role requires a deep understanding of electrical systems, adherence to safety regulations, and the ability to identify and report on potential hazards and compliance issues.KEY RESPONSIBILITIES OF AN ELECTRICAL INSPECTORConduct comprehensive Electrical Installation Condition Reports (EICRs) in commercial and industrial environments.Inspect and test electrical systems, including wiring, circuits, switchgear, and control equipment.Identify and document defects, non-compliances, and potential safety hazards.Provide clear and concise reports detailing the condition of electrical installations, including recommendations for remedial actions.Ensure all inspections are carried out in accordance with relevant standards and regulations, including BS 7671 and IET Wiring Regulations.Maintain up-to-date knowledge of industry standards, legislation, and best practices.Communicate effectively with clients to explain findings, answer questions, and provide technical advice.Participate in ongoing training and professional development activities to maintain and enhance technical skills.QUALIFICATIONS/EXPERIENCEA minimum of 3 years of experience carrying our Eicr'sCity & Guilds 2391-52 (or equivalent) qualification in Inspection and Testing.NVQ Level 318th EditionIn-depth knowledge of BS 7671, IET Wiring Regulations, and other relevant standards and codes.Strong understanding of electrical systems in commercial and industrial settings.Valid UK driving licence (or equivalent, depending on location).SALARY/BENEFITSOur client are offering a salary of £49,000- £51,000 (OTE of £60k - £65K)Holidays- 30 days including Bank holidaysHours of Work - 45 hours a week.Company vehicle - A suitable company car is provided for business use. A company van and fuel card is supplied. Complete with all power tools, testers and PPE.Pension - The current level of contribution by the company is 3% of salary, with the person contributing 5%. Enrolled on the pension scheme from day one.Healthcare - Following successful completion of the 6 month probationary period the person will be invited to join the company health scheme.Sickness and absence: Paid from day one SSPPlease call Tom on 07908947467 or email your CV to in order to prompt a call backTPBN1_UKTJ

Job Title: Design ManagerEmployer: EK Facades LtdGroup: EK GroupLocation: Head Office 104 Welling High Street, Kent, DA16 1ADReports To: Commercial DirectorEmployment Type: Full-TimeAbout EK FacadesEK Facades Ltd operates as the faade and external envelope division of EK Group, delivering specialist cladding, faade and fire remediation packages across London and the South East.As part of EK Group's integrated structure, which includes EK Glazing and EK Roofing, EK Facades provides a single point of responsibility for complete building envelope solutions. We operate as both specialist subcontractor and Principal Contractor, particularly across fire remediation and recladding schemes where coordination, compliance and programme management are critical.With over 70 years of combined director-level experience, our approach is commercially intelligent, programme-focused and built around risk reduction and accountability.The successful candidate will be employed directly by EK Facades Ltd.Role OverviewWe are seeking an experienced and technically capable Design Manager to join our growing design team.The successful candidate will play a key role in the design, coordination and delivery of faade and recladding schemes, with a strong focus on fire remediation and regulatory compliance. The role requires proven experience on reclad projects and demonstrable knowledge of Building Safety Regulator (BSR) requirements and Gateway planning submissions.This position is critical to ensuring that our faade systems are compliant, buildable, coordinated and aligned with programme and commercial objectives.Reporting StructureReports directly to the Commercial DirectorWorks alongside Project ManagersCollaborates closely with the project TeamLiaises with the Procurement TeamLiaises with external consultants, fire engineers and Building Control bodiesInterfaces with EK Group divisions (Glazing and Roofing) where requiredKey ResponsibilitiesDesign & Technical Deliv eryProduce detailed faade design drawings, including: rainscreen cladding systems; EWI render systems; brick slip systems; Structural Framing Systems (SFS); remedial recladding detailsDevelop construction details in accordance with current regulations and fire compliance requirementsEnsure faade build-ups meet performance, structural and fire safety criteriaCoordinate design information with architects, structural engineers and fire consultantsPrepare and manage drawing issue registers and design documentationRecladding & Fire RemediationDesign replacement external wall systems for recladding schemesReview and interpret FRAEW reports and fire strategy documentationDevelop compliant faade remediation detailsCoordinate insulation, cavity barrier and fire stopping interfacesSupport intrusive investigation reviews and as-built assessmentsBSR & Gateway SubmissionsPrepare and coordinate information for Gateway 2 and Gateway 3 submissionsLiaise with the Building Safety Regulator (BSR) and relevant authoritiesAssist in compiling compliance documentation for higher-risk buildingsEnsure design documentation aligns with Building Safety Act requirementsSupport responses to regulatory technical queriesProject & Programme SupportAttend design team meetings and technical workshopsParticipate in site visits and technical inspections where requiredProvide technical support to site teams during installationAssist in resolving design-related site queriesKey Performance Indicators (KPIs)Performance will be assessed against the following:Accuracy and technical quality of design documentationCompliance with fire and regulatory requirementsSuccessful coordination of Gateway submissionsMeeting design programme deadlinesReduction in design-related site queries and reworkWorking HoursMonday to Friday8:30am 5:00pm1-hour unpaid lunch break37.5 hours per weekAdditional hours may be required in line with business needs.Remuneration & BenefitsSalary: £35,000 £45,000 (depending on experience)Annual Group performance-based bonus (discretionary)21 days annual leave plus bank holidaysWorkplace pension scheme (auto-enrolment compliant)Annual salary review (discretionary)Essential RequirementsProven experience working as a Design Manager (or in a comparable design lead role) within a faade subcontractor environmentDemonstrable experience working on recladding schemes (essential)Experience dealing with Building Safety Regulator (BSR) requirementsExperience preparing or supporting Gateway 2 and Gateway 3 submissionsStrong understanding of fire remediation and external wall complianceTechnical knowledge of: rainscreen cladding systems; EWI systems; brick slip systems; Structural Framing SystemsProficiency in AutoCAD (essential)Experience with relevant faade detailing software (preferred)Strong understanding of UK Building RegulationsAbility to interpret and coordinate technical drawings and specificationsRight to work in the UK without requiring sponsorshipDesirable (Not Essential)Degree in Architectural Technology, Civil Engineering or relatedExperience on higher-risk residential buildings (HRBs)Knowledge of CWCT guidelinesExperience working on Design & Build contractsFamiliarity with BIM workflows and coordinationEqual OpportunitiesEK Facades Ltd is an equal opportunities employer and welcomes applications from suitably qualified individuals regardless of background.Application ProcessTo apply for this position, please submit your CV and a covering letter outlining your relevant experience.BenefitsCasual dressCompany pensionFree parkingOn-site parkingWork LocationIn personTPBN1_UKTJ

Mechanical Fitter Architectural Fit-Out Projects Location: LondonSalary: £34,000 - £38,000 per annumJob Type: Full-Time, PermanentWe are currently recruiting an experienced Mechanical Fitter to join a specialist engineering team delivering high-quality architectural fit-out projects across London and surrounding areas. This is an excellent opportunity for a skilled Mechanical Fitter with experience in precision fitting, sheet metal work, fabrication, or bespoke installation projects to work on technically challenging environments.The successful Mechanical Fitter will be responsible for the installation and fitting of architectural components including staircases, lift interiors, escalators, balconies, and associated metalwork, ensuring all work is completed safely, accurately, and to a high standard.Key Responsibilities: Installing architectural metalwork, bespoke interiors, and specialist engineered components.Fitting stainless steel panels, sheet metal components, trims, and specialist finishes.Installing components including staircases, lift interiors, escalators, balconies, handrails, and associated fixtures.Measuring, cutting, drilling, and adjusting materials to ensure accurate installation.Reading and interpreting technical drawings, fabrication drawings, and installation plans.Using a range of hand tools and power tools to complete fitting and installation work.Ensuring all installations meet quality standards, client specifications, and project requirements.Working safely in line with site health and safety regulations.Liaising with site managers, engineers, and other trades to ensure smooth project delivery.Maintaining tools, equipment, and work areas to a high standard.Requirements: Previous experience as a Mechanical Fitter or within a similar fitting and installation role.Experience working on architectural fit-outs, metalwork installations, or bespoke engineering projects.Strong understanding of mechanical fitting, fabrication, and precision installation techniques.Ability to read and interpret technical drawings and engineering documentation.Skilled in the use of hand tools and power tools.Excellent attention to detail with the ability to work accurately to tight tolerances.Ability to work independently and as part of a wider site team.Valid CSCS Card and Safety Harness Certification.Desirable Experience: Previous experience within architectural, construction, engineering, or specialist installation environments.Experience working with stainless steel and bespoke metal finishes.First Aid qualification.EOR202N certification.Carpentry or joinery skills.This is a fantastic opportunity for a skilled Mechanical Fitter looking for a secure permanent position within a specialist engineering environment, working on unique and high-quality architectural projects across London.If you are an experienced Mechanical Fitter with a background in mechanical fitting, fabrication, or architectural installations, we would like to hear from you.TPBN1_UKTJ

Job Title: CNC Miller- Programme, Setter, OperatorLocation: CrayfordSalary: £17.00 - £20.00 per hourCNC Miller required to join a well-established company that specialize in prototyping and production of fine limit sheet metal work, precision CNC machining and welding to OEM customer specification, in particular to the Aerospace, Defence, Marine, Nuclear and Telecommunications industries.Key ResponsibilitiesCNC Milling - 3 & 5 AxisSetting and OperatingUse of Heidenhain ControlsRead and understand engineering drawingsMonitor output and make necessary adjustmentsRequirementsExperience with CNC Milling - Setting, Operating & ProgrammingUnderstanding of engineering drawings and working with tight tolerances.Must live within a commutable distance of DartfordSalary & Further InformationFull time - Permanent position40 hours per week (overtime available)£17- £20 per hour (DOE)30 days holiday including BHPensionBennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries.We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.TPBN1_UKTJ

Job Title: Sheet Metal WorkerLocation: CrayfordSalary: £17.00 - £20.00 per hourSheet Metal Worker required to join a well-established company that specialize in prototyping and production of fine limit sheet metal work, precision CNC machining and welding to OEM customer specification, in particular to the Aerospace, Defence, Marine, Nuclear and Telecommunications industries.Key ResponsibilitiesFine Limit Sheet Metal work (+/- 0.010')Flypress, Procam & Guillotine workManufacture from technical drawingsWorking to a high standard, with an eye for detailRequirementsFine Limit Sheet metal experiencePrevious experience within a similar positionMust be able to read and interpret Engineering drawingsMust live within a commutable distance of DartfordSalary & Further InformationFull time - Permanent position40 hours per week (overtime available)£17- £20 per hour (DOE)30 days holiday including BHPensionBennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries.We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.TPBN1_UKTJ

Residential Conveyancer / Solicitor \n \n London | Permanent | Hybrid working (2 days in office, 3 days remote) \n \n A well-established and growing law firm is seeking an experienced Residential Conveyancer / Solicitor to join its busy and supportive Conveyancing team. \n This is an excellent opportunity for a motivated conveyancing professional looking to take ownership of their own caseload while working within a collaborative environment that values client service, innovation and professional development. \n \n The Role \n You will be responsible for managing a varied residential conveyancing caseload from instruction through to completion, providing clear legal advice and ensuring a high standard of client care throughout the transaction process. \n Key responsibilities include: \n\n • Managing purchase, sale, remortgage and transfer of equity transactions\n, • Advising clients on the legal aspects of residential property matters\n, • Carrying out ID verification, source of funds checks, gift deposit reviews and associated risk assessments\n, • Drafting and issuing contracts\n, • Managing mortgage redemptions and exchanges of contracts\n, • Ordering, reviewing and reporting on searches\n, • Investigating and reporting on titles, including leasehold matters and related enquiries\n, • Reviewing mortgage offers and management packs\n, • Handling both new-build and second-hand property transactions\n, • Building and maintaining strong relationships with introducers and referrers\n, • Supervising and supporting conveyancing assistants and administrative team members where appropriate\n\n \n About You \n To be successful in this role, you will have: \n\n • Residential conveyancing experience with full responsibility for running your own caseload\n, • CILEx Level 6, CLC qualification or equivalent residential conveyancing expertise\n, • Strong technical knowledge across the residential property transaction lifecycle\n, • Excellent written and verbal communication skills\n, • The ability to work effectively under pressure and manage competing deadlines\n, • A proactive, organised and client-focused approach\n, • The ability to work independently while contributing positively to a wider team\n\n \n The Firm \n This opportunity is with a highly regarded law firm known for its modern approach, strong market presence and commitment to delivering an outstanding client experience. The firm continues to invest heavily in its people, technology and processes, creating an environment where employees are encouraged to challenge convention, embrace innovation and build long-term success. \n \n Why Apply? \n\n • Join a growing and ambitious conveyancing team\n, • Manage a high-quality and varied caseload\n, • Work within a supportive and collaborative culture\n, • Excellent career progression opportunities\n, • Competitive salary and benefits package\n\n \n To apply for this role, please do so via this advert \n

About usWe are Ocado Group, and we're bringing world-class automation to online grocery. Our Ocado Smart Platform (OSP) combines cutting-edge robotics, AI, and IoT within our advanced CFCs (Customer Fulfilment Centres). We've mastered the single pick, transforming online delivery for our global partners. Join us and be part of a team pushing the boundaries of retail technology.About the roleWe have a rare opportunity for an experienced Engineer to be part of Ocado history, joining us at our largest operational Customer Fulfilment Centre in Erith. You will be working on state-of-the-art technology, being the principal point of contact for any critical technical issues, as well as keeping the operation running smoothly through proactive improvement works and maintenance activity. You will be working on a range of incredible machinery, from the impressive conveyor networks to lifts and cranes.You will work a shift pattern to support our 24/7 operation, consisting of 12 hour shifts across days, nights and weekends.About youYou have 5+ years of engineering experience, with strong technical competency and a drive for career progression.Ideally from an FMCG background, you're confident working in fast-paced, high-performance environments.You’re computer literate, eager to learn new skills, and bring a creative, solution-focused mindset to problem-solving.Health and safety is a top priority, and you're comfortable and trained to work safely at height.You hold at least a Level 3 qualification or a relevant engineering degree, ready to apply it in an innovative and inspiring setting.What we offerWe believe in supporting our people with meaningful, flexible benefits that prioritise well-being and work-life balance. Here’s a snapshot of what you can expect:Time to recharge:264 hours annual leave, plus the option to buy moreHealth & wellbeing:Private Medical Insurance from your first month, wellbeing support through specialist apps and EAP, plus Income Protection and Life Assurance.Family-first policies:22 weeks paid maternity/primary carer leave and 6 weeks paid paternity leave (after qualifying period).Financial support:Pension with employer matching up to 7%, share schemes (Sharesave & BAYE), and interest-free loans for train tickets.Commuter perks:Cycle to Work Scheme.Exclusive discounts:15% off at Ocado.com with free delivery (starting in your first month).Financial assistance is available for eligible UK candidates relocating 35 miles or more for this role.Ocado Group is an equal opportunities employer and as such makes every effort to ensure that all potential employees are treated fairly and equally, regardless of their sex, sexual orientation, marital status, race, colour, nationality, ethnic or national origin, religion or belief, age, or disability or union membership status.#LI-ONSITE #LI-MG1 OCDIND1

Electrical Tester Romford £38,000 - £42,500 Basic + Overtime (OTE £70k) + Van + Paid Qualifications + Progression + Stability + Pension + Immediate StartAre you a qualified electrical tester or electrician looking to become an electrical tester looking for a long-term and rewarding role with a leading electrical contractor? If so, this is a fantastic opportunity to earn in excess of £70,000 with a company that values quality workmanship, professionalism, and employee development.As an electrical tester you'll carry out EICRs and remedial works across domestic and commercial properties, mainly within social housing and council contracts. This role offers job variety, independence, and the chance to progress within a well-established business that rewards commitment and technical excellence.Your Job As An Electrical Tester Will Include: Carrying out fixed wiring testing (EICR) in domestic and commercial properties Completing remedial works at time of testing and follow-up rewire programmes Liaising with tenants and clients, delivering excellent customer service Ensuring all work meets the latest electrical and safety regulationsAs An Electrical Tester You Will Have: Level 2/3 2391 18th Edition Wiring Regulations (C&G 2382) Experience or desire to start a career in domestic and commercial EICR testing and remedial work Strong knowledge of fault-finding and diagnostics Excellent communication and customer service skills * Full UK driving licence and willingness to travel in and around North / East LondonKeywords: 2391, NVQ Level 3, Testing and Inspection Engineer, Electrical Engineer, Electrician, Electrical, City And Guilds, Domestic Electrician, Commerical, Domestic, Residential

Precision Sheet Metal Worker\n £35,000 - £41,500 + Overtime | Full-Time | Excellent Benefits \n Are you a talented Sheet Metal Fabricator looking to join a company where quality craftsmanship is truly valued? \n Our client, a specialist engineering manufacturer, is seeking a skilled and detail-focused Precision Sheet Metal Worker to become part of their established production team. This is a fantastic opportunity to work on high-specification components, using your expertise to manufacture products to exacting standards within a modern and professional environment. The Role\n As a key member of the manufacturing team, you will be responsible for producing precision sheet metal components while maintaining exceptional quality and accuracy throughout the production process. \n Your duties will include: \n\n • Fabricating sheet metal components to fine tolerances (±0.010")\n, • Operating a range of machinery, including Fly Presses, Brake Presses and Guillotines\n, • Folding, deburring and finishing components\n, • Reading and working from detailed engineering drawings\n, • Carrying out quality checks to ensure specifications are met\n, • Contributing to a safe, efficient and productive workshop environment\nWhat's in It for You?\n\n, • Competitive salary of £35,000 - £41,500, depending on experience\n, • Regular overtime opportunities\n, • 30 days holiday, including Bank Holidays\n, • Company pension scheme\n, • Ongoing training and career progression\n, • Christmas bonus\n, • Free refreshments\n, • On-site parking\nAbout You\n To be successful in this role, you'll have: \n\n • Previous experience within sheet metal fabrication or precision engineering\n, • Confidence interpreting technical drawings\n, • A strong eye for detail and quality\n, • Experience working to tight tolerances\n, • A proactive and reliable approach to work\nReady for Your Next Opportunity?\n If you're looking to join a business that recognises technical skill, rewards commitment and offers genuine long-term career prospects, we'd love to hear from you. \n Apply today to be considered for this exciting Precision Sheet Metal Worker opportunity, offering a salary of £35,000 - £41,500 plus overtime and excellent company benefits.

Location: Home-based with national travelWe have an exciting opportunity with a leading global speciality materials and solutions provider. This organisation partners with manufacturers across a range of advanced industries to deliver innovative products, technical expertise, and sustainable solutions. With a strong international presence and a reputation for technical excellence, the business works closely with customers and suppliers to solve complex challenges, develop new applications, and create long-term commercial partnerships.Key Responsibilities Develop and execute account strategies aligned with business growth objectives and commercial targets. Build and maintain strong relationships with customers across the UK medical manufacturing and advanced materials sectors. Identify, develop, and convert new business opportunities with existing and prospective customers. Establish strong partnerships with key stakeholders, including design houses, OEMs, manufacturers, suppliers, and internal teams. Manage and grow an evolving product portfolio, identifying opportunities for new product introduction and market expansion. Provide technical and commercial support to customers, understanding their challenges and delivering value-added solutions. Collaborate with international teams and regional stakeholders to support wider business strategies. Manage customer enquiries, opportunities, pricing discussions, and commercial negotiations. Monitor account performance, profitability, and sales activity to ensure business objectives are achieved. Ensure accurate CRM management, pipeline visibility, and effective use of digital sales tools. Support customer development activity, including engagement with design and innovation partners. Attend industry conferences, exhibitions, and networking events to strengthen market presence and gather industry insight. Stay informed on market trends, customer requirements, regulatory developments, and emerging opportunities.Candidate Profile Strong technical and commercial background, ideally with experience within advanced materials, polymers, or a related manufacturing environment. Previous experience working within the medical, healthcare, or highly regulated manufacturing sectors would be advantageous. Degree qualified in polymer chemistry, materials science, engineering, or a related discipline, or equivalent relevant industry experience. Proven track record in account management, business development, technical sales, or solution-based selling. Ability to understand customer requirements and provide consultative, value-driven solutions. Excellent communication, negotiation, and stakeholder management skills. Strong networking capability with the ability to build relationships across multiple levels of an organisation. Commercially driven with the ability to develop and implement long-term growth strategies. Self-motivated, organised, and comfortable working independently in a home-based role. Willingness and ability to travel nationally (approximately 4060%). Strong understanding of market trends, innovation, and customer needs within technical industries. Awareness of regulatory considerations relating to materials, applications, and supply chains. Full UK driving licence required. Must have the right to work in the UK, sponsorship is not provided.This is an excellent opportunity to join a highly successful international organisation in a commercial role with significant scope for growth. The position offers the chance to work with innovative materials, develop strategic customer partnerships, and play a key role in expanding market opportunities. With a flexible home-based structure, national remit, and strong potential for career development, this role would suit an ambitious technical sales professional looking to make a real impact.TPBN1_UKTJ

Job Title: Sheet Metal Worker \n Location: Crayford \n Salary: £17.00 - £20.00 per hour \n \n Sheet Metal Worker required to join a well-established company that specialize in prototyping and production of fine limit sheet metal work, precision CNC machining and welding to OEM customer specification, in particular to the Aerospace, Defence, Marine, Nuclear and Telecommunications industries. \n \n Key Responsibilities \n \n\n • Fine Limit Sheet Metal work (+/- 0.010")\n, • Flypress, Procam & Guillotine work\n, • Manufacture from technical drawings\n, • Working to a high standard, with an eye for detail\n\n \n Requirements \n \n\n • Fine Limit Sheet metal experience\n, • Previous experience within a similar position\n, • Must be able to read and interpret Engineering drawings\n, • Must live within a commutable distance of Dartford\n\n \n Salary & Further Information \n \n\n • Full time - Permanent position\n, • 40 hours per week (overtime available)\n, • £17- £20 per hour (DOE)\n, • 30 days holiday including BH\n, • Pension\n\n Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries.We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.

CNC Milling Machinist - Programmer / Setter / Operator \n\n • Location: Romford, Essex\n, • Job Type: Full-time\n\n We are seeking a skilled CNC Milling Machinist with expertise in programming, setting, and operating 5-axis Matsuura machines among others. This role is ideal for individuals with a background in aerospace, although this is preferred but not essential. The successful candidate will have the opportunity to work with high-precision components and receive training on various high-tech machinery. \n Day-to-day of the role: \n\n • Set up and operate CNC machines including Matsuura (MAM72-52, MAM72-42, MAM72-35), DMU, Mori Seki (NH4000 & 5000 DCG Horizontal Pallet, Eco line 50), and HAAS (Mini Mill, VF1, VF2, VF3).\n, • Program CNC machines to produce precision parts and instruments.\n, • Modify programs in response to problems or component specifications.\n, • Ensure machines are set up properly, working well, and producing quality product.\n, • Make calculations for programming including where materials should be cut.\n, • Troubleshoot and resolve issues with machines as they arise.\n, • Perform routine machine maintenance and repair minor damages.\n\n Required Skills & Qualifications: \n\n • Proven experience as a CNC Miller, particularly in programming, setting, and operating machines.\n, • Strong understanding of ISO NC Programs.\n, • Ability to read and interpret technical blueprints and design models.\n, • Precision and attention to detail, suitable for working within tight limits.\n, • Experience in the aerospace sector is advantageous but not mandatory.\n, • Willingness to undergo further training and adapt to new technologies.\n\n Benefits: \n\n • Competitive salary and benefits package.\n, • Opportunities for professional development and training.\n, • Access to state-of-the-art technology and equipment.\n, • Supportive and technically skilled team.\n\n To apply for this CNC Milling Machinist position, please submit your CV and cover letter detailing your relevant experience and why you are interested in this role.

CNC Programmer £18/hour - £20/hour + Overtime + Days + Training + Excellent Benefits Dartford (Commutable from: Bexley, Swanley, Gravesend, Welling, Sidcup, Erith, Orpington, Grays, Tilbury or surrounding areas) \n Do you have CNC programming experience, looking for a days-based position with a well-established business who can offer you long-term job security and a great work-life balance? \n On offer is an excellent opportunity to join a specialist manufacturer where you will work as part of a close-knit team in a modern workshop with overtime on offer to boost earnings. \n The company are at the forefront of their industry and have a fantastic reputation amongst their loyal client base. Due to their continued success, they are looking to bring another CNC Machinist into their in-house machine shop team. \n In this varied workshop-based role, you will be responsible for setting, operating, and programming machines to produce quality machined parts. You will be working on a Monday - Friday days basis within a purpose built and modern facility. \n This is a fantastic opportunity to join a leading manufacturer in a role offering an excellent work-life balance, long term job security, and future career opportunities. \n The Role: - Setting, Operating and Programming CNC Machinery. - Producing high precision equipment - Monday - Friday (40 Hours) \n The Person: - CNC programming experience - Skilled in CNC milling - Commutable to Dartford \n Job Reference Number: 274222 \n To apply for this role or to be considered for further roles, please click "Apply Now" or contact [Jack Banks] at Rise Technical Recruitment. \n Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. \n The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. \n We are an equal opportunities company and welcome applications from all suitable candidates.

Job Description:Looking for a role that offers work-life balance, modern facilities, and long-term career development? This could be exactly what you've been waiting for.Why Join?\n\n • Competitive Salary up to £60,000 per annum\n, • 4on 4off - Nights\n, • Join a high-performing, supportive team\n, • Work in a state-of-the-art workshop with modern equipment\n, • Access to industry-recognised training (IRTEC, LOLER, BPW & more)\nWhat You'll Be Doing\n\n, • Carrying out routine servicing, inspections, and preventative maintenance on a large fleet of trucks and trailers\n, • Diagnosing faults using schematics and advanced diagnostic equipment\n, • Completing repairs including fabrication, welding, soldering, and component assembly\n, • Using a variety of hand tools, power tools, and specialist equipment\n, • Maintaining accurate job records and ensuring compliance with health & safety standards\n, • Supporting the wider team in resolving mechanical and electrical issues efficiently\nWhat We're Looking ForEssential:\n\n, • Level 3 in Heavy Vehicle Maintenance or 5+ years' experience in a similar role\n, • Strong mechanical and electrical knowledge\n, • Ability to read and interpret technical diagrams and schematics\n, • A proactive approach with strong problem-solving skills\nDesirable:\n\n, • Knowledge of heavy vehicle and plant maintenance standards\n, • Class 1 (C+E) Licence and/or FLT Licence\n, • Proficient in using hand tools, power tools.\n, • Excellent communication skills and the ability to work effectively within a team.\nImportant Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, NMS Recruit will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us .

Vehicle TechnicianEstablished Main Dealer | Romford\n £27,000 - £38,000 Basic Salary (Depending on Experience & Accreditation) | OTE Up to £48,000 \n 40 Hours Per Week | Monday to Friday | 8:00am - 5:00pm | No Weekends \n Are you looking to build a long-term career with a well-established franchised dealership representing a globally recognised automotive manufacturer? \n An exciting opportunity has arisen for a Vehicle Technician to join a successful main dealer in Romford. Whether you're newly qualified, an experienced Technician or a Diagnostic/Master Technician, this dealership offers outstanding manufacturer training, genuine career progression and the chance to work within a supportive, professional workshop. \n If you're currently working in an independent garage and looking to move into the main dealer environment, or you're already within a franchised dealership and looking for a fresh challenge, this could be the perfect opportunity. What's on Offer?\n\n • \n Basic salary from £27,000 to £38,000 depending on experience and qualifications. \n • \n Realistic OTE of up to £48,000. \n • \n Monday to Friday only - enjoy every weekend off. \n • \n 40-hour working week (8:00am - 5:00pm). \n • \n Industry-leading manufacturer training and accreditation. \n • \n Ongoing investment in your technical development, including hybrid and EV training. \n • \n Modern workshop equipped with the latest diagnostic technology. \n • \n Company pension and holiday entitlement. \n • \n Clear career progression with opportunities to develop into Diagnostic Technician, Master Technician or Workshop Controller roles. \nSalary Structure\n Junior / Inexperienced Technician \n\n • \n Basic Salary: £27,000 \n • \n OTE: £34,000 \n\n Experienced Technician \n\n • \n Basic Salary: £33,000 - £35,000 \n • \n OTE: £43,000 - £45,000 \n\n Diagnostic / Master Technician \n\n • \n Basic Salary: £35,000 - £38,000 \n • \n OTE: £45,000 - £48,000 \nThe Role\n As part of a highly experienced aftersales team, you'll be responsible for: \n\n • \n Servicing, maintaining and repairing customer vehicles to manufacturer standards. \n • \n Diagnosing and rectifying mechanical and electrical faults. \n • \n Completing warranty and routine servicing work. \n • \n Carrying out vehicle health checks and identifying additional work where appropriate. \n • \n Using the latest manufacturer diagnostic equipment and repair methods. \n • \n Maintaining accurate workshop records and ensuring all work is completed to the highest standards. \n • \n Supporting apprentices and junior technicians where appropriate. \nThe Ideal Candidate\n You'll ideally have: \n\n • \n Level 3 NVQ, City & Guilds or equivalent qualification in Light Vehicle Maintenance & Repair. \n • \n Previous experience as a Vehicle Technician within either a franchised dealership or independent workshop. \n • \n MOT Tester qualification (desirable but not essential). \n • \n Strong diagnostic and fault-finding skills. \n • \n Excellent attention to detail and pride in your workmanship. \n • \n A full UK Driving Licence. \nWhy Apply?\n This is an excellent opportunity to join a stable, respected dealership that genuinely invests in its technicians. You'll receive ongoing manufacturer training, gain recognised qualifications, work with the latest vehicle technology and enjoy genuine long-term career progression-all while benefiting from a rare Monday to Friday working pattern with no weekend commitments.

Manufacturing Engineer and CNC Programmer \n\n • Location: Romford, Essex\n, • Job Type: Full-time\n, • Salary: Dependent on experience\n\n We are seeking a self-motivated Manufacturing Engineer and CNC Programmer with expertise in precision manufacturing and aerospace practices. This role is crucial for generating CNC Part Programmes for 3, 4, and 5 Axis Machine Tools, creating new product processes, and improving manufacturing efficiency. \n Day-to-day of the role: \n\n • Prepare CNC Programmes from planned processes, including tool definition, setup sheets, and tooling plans.\n, • Prove Programmes into production and own the configuration of all supporting process elements such as production routings, tooling, gauges, test equipment, work holding, and CNC programmes.\n, • Determine materials and tools needed to achieve manufacturing goals according to product specifications at the lowest cost.\n, • Make improvements to current operations to enhance efficiency.\n, • Develop processes and methods to meet manufacturing requirements ensuring the lowest cost and highest quality.\n, • Develop transparent cost structures and identify potential reduction initiatives.\n, • Support the development of documentation to enhance process control.\n, • Collaborate with the New Product Introduction (NPI) team.\n, • Ensure that all engineering processes are controlled by the quality management system.\n, • Conduct ongoing research into emerging manufacturing and production technology to complement current and future business strategies.\n\n Required Skills & Qualifications: \n\n • Proficient use of CAD/CAM Software to generate 3D Models and production of CNC Programmes (GibbsCAM preferred).\n, • Highly capable in machine tool and cutting tool specification and application.\n, • Understanding of and ability to interpret technical drawings and specifications.\n, • Previous use and experience of SOLIDWORKS.\n, • Knowledge of precision engineering processes including general machining (milling and turning).\n, • Knowledge of Aerospace requirements particularly operating to AS9100.\n, • Ability to present and communicate at all levels including the customer where appropriate.\n, • Proven experience of working to schedules and the ability to plan personal workloads.\n\n Education: \n\n • Educated in Engineering (Mechanical, Manufacturing, Aerospace) to degree / HNC / HND level or equivalent.\n, • Experience in a Manufacturing / Production role within a medium / large precision engineering organisation, ideally within the aerospace sector.\n, • Qualified/trained in relevant CAD/CAM Software.\n\n Personal Characteristics: \n\n • Strong problem-solving skills with demonstrated ability to implement containment quickly.\n, • Awareness of stakeholder engagement / involvement.\n, • Strong communication skills across all levels.\n, • An ability to prioritise and simplify.\n, • Analytical, integrity, accountability and ownership.\n, • Desire to win, results-oriented, self-motivated and self-managing, customer-focused.\n\n Additional Skills: \n\n • Previous use and experience of GibbsCAM (or similar).\n, • Ability to methodically measure, analyse and present capital opportunities to promote breakthrough unconventional manufacturing / production techniques.\n, • Project Management skills.\n\n To apply for the Manufacturing Engineer and CNC Programmer position, please submit your CV and cover letter detailing your relevant experience and why you are interested in this position.

* Elevate Your Career: Fast-Track to Account Executive * \n \n Are you an ambitious Commercial Account Handler ready to transition into a client-facing executive role? \n Our client, a highly respected independent broker, is seeking a driven professional looking to accelerate their career. This is a dedicated, fast-track opportunity designed to bridge the gap between internal account handling and Account Executive level. \n \n The Role & Responsibilities: \n In this progressive position, you will balance technical account management with proactive client engagement: \n\n • Portfolio Management: Oversee renewals, mid-term adjustments (MTAs), and new business enquiries.\n, • Client Engagement: Develop commercial business via telephone, MS Teams, and face-to-face consultations at client premises.\n, • Executive Collaboration: Work alongside Account Directors to support complex market placements and high-level client servicing.\n, • Relationship Building: Cultivate and maintain strong, long-term partnerships across diverse sectors, including Construction, Property, Hospitality, Retail, and Manufacturing.\n, • Compliance & Technical Support: Ensure rigorous documentation standards and assist with basic claims queries.\n\n \n Candidate Profile: \n The ideal candidate combines strong technical broker experience with a proactive, corporate mindset: \n\n • Industry Experience: Proven background within commercial insurance, ideally within a brokerage environment.\n, • Communication Skills: A confident, articulate communicator with a strictly client-focused approach.\n, • Operational Excellence: Exceptional organizational skills, sharp attention to detail, and a service-driven work ethic.\n, • Key Qualifications: Progress toward Cert CII and familiarity with the Acturis platform are highly advantageous.\n\n \n About the Broker: \n\n • Relationship-Led: An independent firm that values genuine client connections over rigid corporate metrics.\n, • Structured Growth: A collaborative, expanding team that actively encourages and invests in professional development.\n, • Diverse Risk Exposure: Opportunity to manage complex risks across a wide variety of commercial trades.\n\n \n Along with our client, we are committed to a diverse workforce and as such recruit from a wide available pool of talent, with the hiring, assessment and selection process being fair, free from bias and one which ensures the right person is selected for the job, based on merit. We treat colleagues, candidates, clients, and business partners with equality, fairness and respect, regardless of their age, disability, race, religion or belief, gender, sexual orientation, marital status or family circumstances. \n A copy of our D&I policy can be made available upon request.

Are you… a driven and experienced a/c engineer looking for a new role? \n Do you… have appropriate knowledge of a/c systems? \n Are you… within a reasonable distance of Dartford DA2? \n \n A wonderful opportunity has arisen with a well-known Air-Conditioning Service company based in Kent. Our client is looking for a candidate with a strong knowledge of air conditioning systems, capable of servicing and maintenance. The ideal candidate will be customer focused and committed to delivering high-quality repairs efficiently and efficiently. \n Your day-to-day tasks will primarily include servicing, repairing and maintaining air conditioning systems, working on residential and commercial sites. You will occasionally be working outside standing hours, to ensure excellent customer service. \n Requirements \n\n • Be located within 15 miles of their Dartford-based warehouse.\n, • Hold a full UK driving license.\n, • Have a minimum of 8 years of industry experience.\n, • Be flexible, open to change and trustworthy.\n\n Essential Requirements (some must be held) \n\n • Technical: F-Gas, Safe Handling, Electric, City & Guilds\n, • Health & Safety: CSCS, PASMA, IPAF, or similar\n\n Package & Benefits \n\n • Full-time.\n, • Above average salary (dependent on experience)\n, • Mobile role (office based near Dartford)\n, • Monday to Friday – 8:30am to 5:30pm\n, • New van, laptop, company card, specialist tools and company uniform.\n, • 28 days annual leave (inc bank holidays)\n, • Continuous training (inc manufacturer training)\n, • Friendly and supportive work environment.\n\n \n EXCITING NEW ROLE, WILL NOT LAST LONG \n APPLY NOW FOR IMMEDIATE CONSIDERATION

Trainee AI Engineer - No Experience Needed! \n Ready to launch a future-proof career in AI - even if you have zero experience? \n We’re looking for ambitious individuals ready to break into the world of artificial intelligence and data science. Our industry-leading AI Traineeship is designed to take you from complete beginner to a highly employable Junior AI Engineer, with full training provided and a guaranteed job offer (£25K-£45K starting salary) within 20 miles of your location. \n Whether you're working full-time, part-time, or currently unemployed, our flexible, self-paced program allows you to train around your lifestyle and be job-ready in as little as 6-12 months. \n How it works - your journey to AI successStep 1: Discover AI \n Start your journey with our beginner-friendly mini-course bundle. Explore the fundamentals of AI through interactive videos, presentations, and quizzes - all accessible anytime, anywhere, through our easy-to-use online platform. \n Step 2: Full-Stack AI Mastery \n Dive deeper with in-demand technical skills including Python programming, data handling, machine learning, and version control with Git and GitHub. You’ll work on hands-on mini projects that mirror real-world challenges, helping you build confidence and a strong portfolio as you learn. \n Step 3: Get Certified \n Prepare for and earn your Microsoft AI-900: Azure AI Fundamentals certification, an internationally recognised qualification that proves your knowledge and boosts your credibility with employers. \n Step 4: Real-World Projects \n Showcase your new skills with two industry-based, practical projects assigned by your personal tutor. These projects are designed to give you real, portfolio-worthy experience, making you stand out to employers from day one. \n Your guaranteed future \n After completing your training, you'll be placed in a Junior AI Engineer role with a guaranteed starting salary of £25K-£45K. We work with top employers across the UK to ensure you get matched with a role close to home. \n We guarantee a job offer upon completion or 100% of your course fees refunded. \n We’re proud to have helped over 1,000 people each year transform their careers. Explore our success stories on our website and see what your future could look like. \n Ready to future-proof your career? \n If you’re passionate about tech and ready to break into one of the fastest-growing industries in the world, apply now. One of our friendly advisors will be in touch to guide you through the next steps.

Lift Field Technician | East London & Surrounding Areas \n \n We are currently working with a well-established and growing organisation within the lift engineering sector who are looking to appoint an experienced Lift Field Technician to join their service team covering East London and surrounding regions (including Essex, Kent, Sussex. \n \n This is an excellent opportunity for a skilled lift engineer looking to step into a more technical, problem-solving focused role with strong long-term career development. \n \n The Role \n As a Lift Field Technician, you will play a key role in providing technical expertise and support across a regional portfolio. You’ll be responsible for diagnosing faults, supporting service teams, and ensuring high standards across lift maintenance and modernisation projects. \n Key responsibilities include: \n\n • Providing technical support and troubleshooting on passenger lifts\n, • Diagnosing faults and delivering effective repair solutions\n, • Supporting Service Engineers with complex technical issues\n, • Testing and supporting lift modernisation works\n, • Working across a variety of lift equipment and manufacturers\n, • Managing your own workload across a regional patch\n\n \n What We’re Looking For \n\n • Proven experience within the lift industry (service / repairs / technical support)\n, • NVQ Level 4 in Lift Engineering (or Level 3 with progression towards Level 4)\n, • Strong fault-finding and problem-solving skills\n, • Good working knowledge of a range of lift equipment and manufacturers\n, • Ability to work independently and manage your own region\n, • Full UK Driving Licence\n, • Right to work in the UK\n\n

Fire Risk Assessor | Up to £60,000 + Excellent Benefits & Career DevelopmentThe OpportunityOur client is one of the UK's leading fire safety and compliance consultancies, forming part of a major national organisation with an outstanding reputation for delivering high-quality fire safety services across the built environment.Due to continued growth, they are looking to appoint an experienced Fire Risk Assessor to join their team. This is an excellent opportunity to join a technically strong business that genuinely invests in the development of its people, offering long-term career progression, structured training and exposure to a diverse range of buildings and clients.With a substantial number of Fire Risk Assessors across the country and in every region, the work is regional and does not involve extensive travel for work-life balance.If you're passionate about improving fire safety standards and enjoy delivering high-quality, client-focused work, this could be the ideal next step in your career.The RoleYou will be responsible for undertaking Fire Risk Assessments across a diverse portfolio of well-known commercial brands, healthcare, education, government buildings and residential. Excellent variety of properties to survey.Working closely with clients, building managers and internal technical specialists, you will provide practical, compliant and commercially focused fire safety advice whilst producing technically accurate reports and recommendations.This is a varied, client-facing position that offers excellent exposure to different building types and genuine opportunities to further develop your technical expertise.Key ResponsibilitiesUndertake Fire Risk Assessments in accordance with the Regulatory Reform (Fire Safety) Order and PAS 79 methodology.Produce detailed, high-quality reports with clear, practical and risk-based recommendations.Advise clients on legislative compliance, fire safety management and remedial actions.Build strong relationships with clients and stakeholders through professional communication and technical expertise.Maintain an excellent understanding of current fire safety legislation, Building Regulations and recognised industry guidance.Work collaboratively with colleagues across wider fire safety and compliance teams.Manage your own diary and workload whilst delivering work to agreed timescales.About YouWe're looking for an experienced Fire Risk Assessor who can demonstrate:Proven experience undertaking Fire Risk Assessments independently.Strong understanding of UK fire safety legislation, Approved Document B and associated guidance.Excellent report writing and communication skills.Ability to provide practical, proportionate fire safety advice.Membership of the IFE, IFSM or another recognised competency register (Intermediate level or above preferred).A qualification in Fire Safety or Fire Engineering would be advantageous.Full UK driving licence.What's on OfferSalary of £45,000 - £60,000 depending on experience.Structured career progression within one of the UK's largest fire safety and compliance organisations.Ongoing technical training, mentoring and funded professional development.Opportunity to work across a diverse portfolio of complex and interesting buildings.Flexible benefits platform allowing you to tailor your benefits package.Purchase up to 5 additional days of annual leave each year.Virtual GP service for you and members of your household.Enhanced pension contributions.Life assurance cover.Save As You Earn and employee share schemes.Financial wellbeing support, including access to earned wages before payday.High street, gym and lifestyle discounts.Supportive team environment with genuine opportunities for long-term career progression.Why Apply?This is an outstanding opportunity to join one of the UK's most respected names in fire safety and compliance. You'll work alongside highly experienced professionals, receive ongoing investment in your development, and have the opportunity to build a long-term career within a growing business that values technical excellence, quality and customer service.If you're looking for your next challenge as a Fire Risk Assessor and want to join an organisation where your development is genuinely supported, please submit your latest CV, outlining your technical expertise and relevant sector experience.TPBN1_UKTJ

Your role at a glanceAs our Security Systems Engineer, you will be responsible for the management of various security systems and applications, including access control, CCTV, PSIM, and key management. This role ensures compliance with internal policies, legal, customer, and risk requirements, manages physical security audits, and investigations, system operation and maintenance, and troubleshoots security applications and technologies. You will act as subject matter expert, coordinate suppliers, provide for internal and customer reporting, manage incident trouble tickets, and contribute to green field and brown field projects. What we are looking forPreferably Tyco SWH CCURE 9000 LEVEL 1 and LEVEL 2 certifiedPreferably Tyco SWH CCURE 9000 LEVEL 4 - ENTERPRISE SOLUTION certifiedPreferably Advancis WinGuard Professional certifiedPreferably Milestone Technical Configuration Level 1 certifiedSeveral years of experience in Data Center environments typical physical security systems and technologies deployments and usageSeveral years of experience with a focus in areas such as enterprise-scale physical security systems (access control systems, CCTV/video systems, PSIM systems, key management systems, and similar), network, and application securitySeveral years of experience on a Security Operations team, especially experience in coordinating responses to security incidents and managing security systems applicationsExtensive knowledge of physical security technology, risk assessment methodologies, investigations, regulations, applications, and network administrationSolid project management skills to manage mid-scale (in-life) projects (experience in managing technical security projects and working with various security systems design packages, etc)Several years of experience in configuring Video Management Systems (VMS) applicationsSeveral years of experience in configuring Key Management Systems (Traka, Deister) applicationsExperience in managing suppliers and contracts (with specific focus at technicians performing site services)Problem solving / troubleshooting skillsSkills to apply systems knowledge to facilitate resolution of operational issuesExpertise to read blueprints/schematicsKnowledge of Microsoft and Unix operating systems, SQL databases, other Microsoft Office products and electrical engineeringAbility to design and deliver comprehensive physical security solutionsDemonstrating high-level customer service skillsPresentation skills (delivered to both management and technical audiences)What you will doAdministration and management of access control system applicationsAdministration and management of closed-circuit-television (CCTV) applicationsAdministration and management of physical security information management (PSIM) applicationsAdministration and management of the key management system applicationsMaintain physical security compliance with internal policies, customer, legal and risk requirementsManages physical security related auditsManages physical security incidentsManages physical security incidents and investigationsManages troubleshooting of physical security applications and technologiesServes as a subject matter expert (SME) for security technologies (access control, CCTV, PSIM, key management) for sustaining and new installationsOwns and manages all aspects of the security equipment at the facilities to ensure appropriate and efficient functionality by regular testing and monitoring and rolling preventative maintenance of systems to maximize uptimes and minimize customer impactsMaintains comprehensive documentation for pre- and post- installation of security equipmentReviews and updates security systems layout as modifications occurConsults on enhancements and upgrades of systems supporting business needs by benchmarking systems performance and applying Best Known Methods (BKM) approachParticipates in NTT Security task forces, suggests system changes and improvements, and manages inventory of all equipment to minimize disruption to businessFacilitates working arrangements with security vendors to ensure safe and timely installation, commissioning, routine maintenance, and repairs of equipment by coordinating work between suppliers, other departments, and internal customers (documentation, scheduling, change coordination, safety plans)Manages physical security performance testing and inspection activitiesCompiles data and reports findings to managementEnsures security standards are being applied appropriately, including the review of planned and ongoing security installationsReviews construction drawings and blueprints and provides pre-construction guidance to ensure compliance with security systems specifications or NTT customer requirementsPlans and executes project tasks for activities described aboveYou will be required to work on a 4 on / 4 off shift pattern, days and nights including weekends. Each shift is 12 hours long. The Day shift is from 7:00 am until 7:00 pm and the night shift is from 7:00 pm to 7:00 am Who we areAs the third largest data center provider, we operate over 150 data centers in more than 20 countries and regions. We understand that every business large and small has its own unique needs and goals. We offer local-to-global data center expertise, aligned with our connected platform of AI-ready data centers to create solutions that enable our clients to seamlessly scale their digital businesses, anywhere and anytime.TPBN1_UKTJ

An established and growing firm of Chartered Accountants in North Kent is seeking an experienced Accounts & Tax Manager to join its senior leadership team. This is a key client management role, ideal for a qualified accountant who enjoys leading people, driving performance and delivering an exceptional client service. The Role\n\n • Manage a portfolio of clients and act as their trusted adviser.\n, • Lead the day-to-day running of the office, ensuring an efficient workflow and effective WIP management.\n, • Review accounts and tax work, providing technical oversight rather than preparing work yourself.\n, • Mentor, develop and support junior and aspiring managers.\n, • Identify opportunities for business development and contribute to the firm's continued growth.\n, • Maintain the highest standards of client service and technical quality.\nAbout You\n\n, • ACA or ACCA qualified.\n, • Previous experience in a senior manager or client manager role within an accountancy practice.\n, • Strong technical knowledge of accounts and taxation.\n, • A confident communicator with excellent leadership and relationship-building skills.\n, • Commercially minded, proactive and committed to developing both people and the business.\nThis is an excellent opportunity to join a respected independent practice where you will play a pivotal role in shaping the future of the office and supporting the firm's continued success. Please do get in contact with Robin at Farrer Barnes in the 1st instance.Farrer Barnes Ltd does not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and complies with all relevant UK legislation. Farrer Barnes Ltd acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers.

\n Project Manager£60,000 - £70,000 + Hybrid Working + Private Healthcare + 25 Days Holiday + Pension + Company BenefitsDartford / London & Home Counties \n Are you a Project Manager with mechanical HVAC experience in commercial environments, looking for a varied role managing multiple M&E projects from initial specification through to completion? \n On offer is a permanent position where you will oversee technical building services projects across London and the Home Counties, ensuring works are delivered safely, on time, within budget, and to the required standard. \n In this role, you will manage multiple M&E projects at the same time, taking responsibility for identifying works, specifying requirements, tendering, managing subcontractors, reviewing budgets, and maintaining strong client relationships. You will also manage commercial risk, provide financial updates, and ensure projects are delivered in line with QSHE requirements. \n This role would suit a Project Manager with a mechanical HVAC background, experience delivering commercial M&E projects, and the ability to manage clients, subcontractors, budgets, and project delivery across multiple sites. \n The Role: \n\n • Manage multiple M&E projects from specification and tender through to delivery\n, • Oversee commercial HVAC and building services projects across client premises\n, • Manage budgets, programmes, commercial risk, subcontractors, client relationships, and project profitability\n, • Hybrid role covering Dartford, London, and the Home Counties, with flexibility around travel and working hours\n\n The Person: \n\n • Project Manager or similar with mechanical HVAC experience\n, • Background delivering M&E projects within commercial environments\n, • Experience managing multiple projects, subcontractors, budgets, tenders, and client relationships\n, • Accessible to Dartford and able to cover London and the Home Counties\n\n Reference: BBBH26695AKeywords: M&E Project Manager, Mechanical Project Manager, HVAC Project Manager, Plant Room, Facilities Management, Mechanical HVAC, Commercial HVAC, M&E Projects, Mechanical and Electrical, Subcontractors, Tendering, Commercial Management, QSHE, Dartford, London, Home Counties \n If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. \n We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. \n Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

Night Shift Quality Control Inspector \n\n • Location: Romford, Essex\n, • Job Type: Full-time, Night Shift\n, • Salary: Dependent on experiece\n\n We are seeking a dedicated Night Shift Quality Control Inspector to join our clients' team. This role is crucial for ensuring the control and compliance of products within the Quality Control inspection department in accordance with current manufacturing and Quality Assurance procedures, engineering drawings, and customer requirements. \n Day-to-day of the role: \n\n • Verify the conformity of parts, assemblies, and sub-assemblies according to engineering drawings, the quality management system, and specific customer requirements.\n, • Ensure comprehensive completion and auditable traceability of inspection records.\n, • Support Production with the timely verification of batch first off.\n, • Create and compile First Article Inspection Reports (FAIRs).\n, • Conduct inspection duties across all areas of the manufacturing and supply chain process as required.\n, • Identify and report non-conformance as per the Company procedure.\n, • Ensure compliance with Quality Assurance and HSE policies and procedures at all times.\n, • Process and return documentation for parts dispatched for external processing.\n, • Highlight and escalate quality concerns to production management and quality engineering.\n, • Support problem-solving initiatives to drive root cause analysis and preventive action.\n, • Participate in New Product Introduction planning meetings and advise on inspection methodology.\n, • Engage in Continuous Improvement initiatives.\n\n Required Skills & Qualifications: \n\n • Ability to interpret and understand technical data including customer drawings, specifications, and FAIR documentation.\n, • Experience with goods inward inspection of finished products/components.\n, • Familiarity with aerospace customers and suppliers is preferred.\n, • Proficiency in inspecting precision components ensuring adherence to drawing requirements.\n, • Skilled in setting and using a variety of direct inspection gauges and measuring equipment.\n, • Experience with Co-ordinate Measuring Machine (CMM) operation.\n, • Knowledge of Sheet Metal/Fabricated parts inspection.\n, • HND qualified or equivalent, with good knowledge of both Imperial and metric geometrical definitions.\n, • Strong inspection, testing, and examination techniques.\n, • Excellent numerical skills and the ability to make accurate measurement calculations.\n, • Effective communication skills, both verbally and in writing.\n, • Ability to work independently or as part of a team, managing tight deadlines while maintaining quality standards.\n\n To apply for the Night Shift Quality Control Inspector position, please submit your CV and a cover letter detailing your relevant experience and why you are interested in this role.

Your new companyYou will be joining a well-established and growing specialist contractor based in Dartford. The organisation delivers high-quality fencing, groundworks, hoarding and temporary work's solutions across a diverse range of sectors, including education, infrastructure, industrial, data centres and government environments. The business has built a strong reputation for technical expertise and long-standing client relationships, operating across multiple projects typically ranging in value from £50k to £1mYour new roleAs an Intermediate to Senior Quantity Surveyor, you will be responsible for the commercial management of multiple projects concurrently, ensuring strong financial performance and contractual compliance throughout the project Life cycle.Key responsibilities will include:Reviewing and negotiating subcontract terms and conditionsPreparing and managing monthly applications for payment, ensuring timely certification and receiptIdentifying, pricing and agreeing variations with client representativesPreparing and agreeing final accountsManaging and negotiating extensions of timeProducing accurate monthly cost reports, including Work in Progress and accrualsMaintaining regular client liaison and stakeholder communicationWorking closely with operational teams, including Contracts Managers, site teams and internal finance functionsWhat you'll need to succeedA minimum of 5 years' experience in a Quantity Surveying roleExperience within a main contractor or relevant specialist subcontractor environment (groundworks/Fencing/Externals)Proven capability in managing multiple small to medium-sized projects simultaneouslyA strong working knowledge of JCT forms of contract Experience delivering projects typically valued between £50k and £1m A professional, adaptable and commercially astute approachStrong negotiation, communication and stakeholder management skillsWhat you'll get in returnCompetitive salary unto £60k + packageCompany car or car allowanceOpportunity to work within a specialist, technically focused sectorExposure to a varied and interesting portfolio of projectsA collaborative working environment with clear opportunities for progressionWhat you need to do nowIf you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now.If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. \n Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

Bridge Recruitment is recruiting on behalf of our client for an experienced Sheet Metal Fabricator to join a busy and growing engineering team. The Role\n This is an excellent opportunity to work on interesting and varied engineering projects using modern equipment within a well-established workshop environment. Training will be provided for the CNC Brake Press where required. Skills & Experience Required\n To be successful in this role, candidates should possess the following skills and experience: \n\n • Relevant workshop experience, ideally within a precision sheet metal or plate environment working to tight tolerances\n, • Ability to read and interpret technical drawings\n, • General engineering workshop knowledge\n, • Experience working with aluminium, stainless steel, and mild steel\n, • CNC Brake Press experience desirable (training provided)\n, • TIG and MIG welding experience advantageous\n, • Excellent attention to detail and communication skills\n, • Ideally time served\nSalary & Benefits\n\n, • Competitive pay: up to £18 per hour\n, • Training and development provided\n, • Modern equipment and excellent staff facilities\n, • Interesting and varied project work\n, • Overtime available paid at time and a half\nWorking Hours\n\n, • Monday to Thursday: 07:30 - 16:00\n, • Friday: 07:30 - 14:00\nAnnual Leave\n\n, • 20 days holiday during the first year of service\n, • Increasing to 25 days thereafter\n, • Bank holidays in addition\n\n Apply today!

Trainee Project Manager Programme – No Experience Needed \n Future-proof your career in Project Management – starting today. \n \n Looking for a career change? Maybe you’re already working but want a more technical role with better long-term prospects. Or you could be between jobs and ready for a fresh start in tech. \n The ITOL Recruit Project Manager Programme is designed to help you move into a high-demand coding role, even if you have no prior experience. \n Train online at your own pace and land your project management role in 1-3 months. \n Please note this is a training course and fees apply \n Job guaranteed - complete the programme and get a job or get your money back. \n Our candidates earn £30,000-£50,000. \n \n Step 1 - APM (Association for Project Management) Qualification \n The first step is completing the APM Project Fundamentals Qualification (PFQ) \n This professional industry-recognised qualification teaches you the fundamental principles of the project profession. The APM are the only chartered project management group in the world. \n Study time for the qualification is approximately 20 hours and qualification achieved by completing a 1-hour multiple choice exam. \n The course is provided online and comes complete with exam simulators and revision tools. \n You will be provided with access to a 1hour online revision workshop prior to sitting your exam. \n This qualification will set you on a route to becoming a Chartered Project Professional with additional study and experience. \n Step 2 - PRINCE2 Foundation \n PRINCE2 is the most recognised methodology used by Project Managers worldwide and therefore an essential qualification for anybody looking to work in Project Management. \n It is a process driven methodology and often referred to as a waterfall methodology. \n Study time is approximately 15-20 hours and qualification obtained through a 1-hour multiple choice exam. \n The course is provided online and comes complete with exam simulators and revision tools. \n You will be provided with access to a 1-hour online revision workshop prior to sitting your exam. \n Step 3 - Project Management Simulation \n With our exclusive online Simulated Project Assignment, you will have the opportunity to make your way through a simulated project which shadows a project manager. \n These projects and scenarios are based on real world project and scenarios. \n Once completed, our tutor will grade your work and issue a certificate of completion. \n Step 4 - Recruitment Support \n Now you are qualified for an entry level project management position our recruitment support team will now begin collaborating with you to help you secure your first role in the project management sector. \n We have been helping candidates start and build careers in the project management industry since 2007 and have a 4.9 Trustscore on Trustpilot. \n Our Recruitment Support team will help you work through job applications, interviews and provide you with a full cv review based around your new qualification and written to maximise your chances of obtaining a role in the project management sector. \n They will provide you with guidance as to which roles our most suitable for you as an entry level project sector worker aiming to become a project manager. This will include mock job interviews as well as any help you feel you need. \n Our money back guarantee \n If after 1 year of passing your formal qualifications, we have been unable to help you secure a role, we will refund your study fees minus the cost of the exams. \n However, we are normally able to help candidates find their first role within 6 months of qualifying and for locations based close to major cities this is often reduced to less than 3 months. \n Check our testimonials from the hundreds of candidates we have already helped. \n What Now? \n To accommodate candidates, the training element of the package is available on finance terms of up to 1 year. This enables you to get qualified and start in your new role without having to fund all the training costs up front. \n Enquire now and one of our experienced Career Consultants will contact you within 4 working hours to answer any questions that you may have and to assist you in taking the first step towards your Project Management career aspirations. \n We look forward to receiving your new application and putting you on the pathway to a new and financially rewarding career in project management.

SMT Production Engineer \n Dartford, Kent£27,000 - £30,000 DOE \n Right Match Recruitment Group is proud to be working in partnership with a well-established and highly respected electronics manufacturing company based in Dartford. Due to continued growth, they are looking to recruit an SMT Production Engineer to join their successful manufacturing team. \n This is an excellent opportunity for someone with previous Surface Mount Technology (SMT) experience who enjoys improving manufacturing processes, increasing productivity and working with the latest electronic manufacturing equipment. \n The Role \n Reporting to the Production Engineering Manager, you will play a key role in supporting the SMT production department, ensuring manufacturing processes operate efficiently whilst maintaining high quality standards. \n Your responsibilities will include: \n\n • Supporting the day-to-day operation of the SMT production lines.\n, • Monitoring machine performance and identifying opportunities to improve productivity and efficiency.\n, • Analysing production data and implementing continuous improvement initiatives.\n, • Assisting with the introduction of new products into manufacture, ensuring they are suitable for production.\n, • Working closely with Production and Design teams to improve manufacturing processes.\n, • Programming SMT machinery and producing clear operating procedures and work instructions.\n, • Monitoring process performance and quality data to identify trends and implement corrective actions.\n, • Supporting preventative maintenance activities to minimise machine downtime.\n, • Assisting with pre-production builds and new product introductions.\n, • Supporting lean manufacturing initiatives across the production department.\n, • Delivering training and technical support to production staff where required.\n, • Assisting with the evaluation of new equipment and manufacturing technologies.\n\n About You \n The successful candidate will have: \n\n • Previous experience within an SMT or electronics manufacturing environment.\n, • Knowledge of electronic manufacturing processes.\n, • Experience of machine programming and process improvement.\n, • A proactive approach with strong problem-solving skills.\n, • Excellent communication and organisational abilities.\n, • A HNC (or equivalent) in Electrical or Electronic Engineering would be advantageous.\n, • Experience with Europlacer equipment would be beneficial, although training will be provided.\n\n What's on Offer? \n\n • Salary of £27,000 - £30,000, depending on experience.\n, • Monday to Thursday: 8:30am - 5:00pm\n, • Friday: 8:30am - 4:00pm\n, • 24 days holiday plus bank holidays, increasing with service.\n, • Enhanced pension scheme.\n, • Life assurance.\n, • Enhanced parental leave.\n, • Employee Assistance Programme.\n, • 24/7 GP and wellbeing support.\n, • Cycle to Work Scheme.\n, • Employee discounts and benefits platform.\n, • Ongoing training and career development.\n, • Long service awards.\n, • Company events.\n, • Charity volunteering day each year.\n\n If you have experience within SMT manufacturing and are looking to join a forward-thinking electronics manufacturer that offers genuine career development, we would love to hear from you. \n To apply, contact Kirsty Cutts at Right Match Recruitment Group on or apply for this role. \n \n INDKC

Skilled Fine Limit Sheet Metal Worker \n Aerospace Fabrication \n Romford, Essex \n Permanent \n A growing aerospace manufacturer is seeking a Skilled Fine Limit Sheet Metal Worker to join its fabrication and assembly team. \n The company produces high-precision aerospace components and assemblies, working to tight dimensional and cosmetic standards. This role would suit an experienced aerospace sheet metal worker who is confident working independently on complex parts. \n Key responsibilities \n\n • Manufacture and assemble fine limit sheet metal components\n, • Work from detailed engineering drawings and technical instructions\n, • Form, bend, shape, drill, rivet and fit aerospace materials\n, • Carry out bench fitting and assembly operations\n, • Ensure work meets strict quality and traceability requirements\n, • Support continuous improvement and production efficiency activities\n\n Requirements \n\n • Proven fine limit sheet metal experience within aerospace or precision engineering\n, • Ability to interpret complex engineering drawings\n, • Experience working with aluminium, stainless steel and titanium\n, • High level of accuracy and manual dexterity\n, • Experience working to tight tolerances and cosmetic standards\n\n What’s on offer \n\n • Competitive salary\n, • Overtime available\n, • Healthcare package\n, • Modern aerospace manufacturing environment\n, • Secure long-term position with opportunities to develop further skill\n

This is an excellent opportunity for an experienced Audit Senior to contribute to the success of an accountancy firm in Dartford. The role involves leading audits, working closely with clients, and ensuring high-quality service delivery in the field of accounting and finance. \n Client Details \n Our client is a medium sized accountancy practice. \n Description \n\n • Lead audit assignments from planning through to completion, ensuring compliance with relevant standards.\n, • Prepare and review financial statements for a variety of clients across different sectors.\n, • Build and maintain strong client relationships, acting as a trusted advisor on audit and financial matters.\n, • Supervise and mentor junior team members, offering guidance and feedback on their work.\n, • Identify potential issues and provide practical recommendations to clients for improvement.\n, • Ensure all audit files are completed to a high standard and submitted within deadlines.\n, • Assist in the development and implementation of internal audit processes and best practices.\n, • Stay updated on the latest developments in accounting and audit regulations.\n\n Profile \n A successful Audit Senior should have: \n \n\n • Professional accounting qualifications (ACA or ACCA).\n, • Strong technical knowledge of audit and accounting standards.\n, • Experience in managing audits from planning to completion.\n, • Excellent organisational skills with the ability to manage multiple assignments.\n, • Strong interpersonal skills to build and maintain client relationships.\n, • Experience in supervising and mentoring junior team members.\n, • A proactive approach to problem-solving and attention to detail.\n\n Job Offer \n\n • Competitive salary ranging from £45,000 to £55,000 per annum, depending on experience.\n, • Comprehensive benefits package tailored to support employees' wellbeing.\n, • Opportunities for career progression within a respected professional services firm.\n, • Supportive and collaborative work culture in a small-sized team environment.\n, • Conveniently located in Dartford with easy transport links.\n, • Hybrid working.\n\n