Trabajos apprentice en Los Angeles, CaliforniaCrear alertas

Overview: If you reside in California, please see our ___ for more information about our data handling practices and your data rights. Responsibilities: Let MV Transportation expand your toolbox! Do you want a stable career with great and steady pay, a set schedule, and outstanding benefits?! Would you like to work with a company that invests in your growth? Then join the MV Transportation team. Start on the path in under 5 minutes by reading the job description and submitting your application. MV Transportation is now hiring experienced Mechanics in your area! Who You Are: As a Mechanic, you will perform preventative maintenance, diagnosis, service and repair of steering, suspension, brakes, engines, transmissions, differentials, electrical, wheelchair lifts, and air conditioning systems. Successful applicants must be able to work safely, perform part analysis on damaged parts and assist in inventory control or other duties, as necessary. What’s in it for YOU: • Competitive Pay Rates!, • 40 hours a week, not flat rate, • OT as needed over 40 hours, • Paid vacation, • Company provided uniform, • Corporate partner discount program, • Diagnoses, examines, and investigates vehicles to determine causes of defective operation of vehicle systems and components., • Perform scheduled preventative maintenance of vehicles, • Execute major and minor repairs of defective components., • Document all activities in MV’s Fleet Management System., • High school diploma or equivalent., • Combination of at least five (5) years of apprentice level verifiable training and experience in Fixed route CNG mechanics, which may include high school mechanics courses and/or a regional occupational program. MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment. #appcast

Overview: If you reside in California, please see our ___ for more information about our data handling practices and your data rights. Responsibilities: Let MV Transportation expand your toolbox! Do you want a stable career with great and steady pay, a set schedule, and outstanding benefits?! Would you like to work with a company that invests in your growth? Then join the MV Transportation team. Start on the path in under 5 minutes by reading the job description and submitting your application. MV Transportation is now hiring experienced Mechanics in your area! $7,500 SIGN ON BONUS AVAILABLE! Who You Are: As a Mechanic, you will perform preventative maintenance, diagnosis, service and repair of steering, suspension, brakes, engines, transmissions, differentials, electrical, wheelchair lifts, and air conditioning systems. Successful applicants must be able to work safely, perform part analysis on damaged parts and assist in inventory control or other duties, as necessary. What’s in it for YOU: • Competitive Pay Rates!, • 40 hours a week, not flat rate, • OT as needed over 40 hours, • Full Benefits: Medical, Vision, Dental, and 401K plan, • Paid vacation, • $7,500 Sign On Bonus, • Company provided uniform, • Corporate partner discount program, • Diagnoses, examines, and investigates vehicles to determine causes of defective operation of vehicle systems and components., • Perform scheduled preventative maintenance of vehicles, • Execute major and minor repairs of defective components., • Document all activities in MV’s Fleet Management System., • High school diploma or equivalent., • Combination of at least five (5) years of apprentice level verifiable training and experience in automotive or diesel mechanics, which may include high school mechanics courses and/or a regional occupational program. MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment. #appcast

Overview: If you reside in California, please see our ___ for more information about our data handling practices and your data rights. Responsibilities: Let MV Transportation expand your toolbox! Do you want a stable career with great and steady pay, a set schedule, and outstanding benefits?! Would you like to work with a company that invests in your growth? Then join the MV Transportation team. Start on the path in under 5 minutes by reading the job description and submitting your application. MV Transportation is now hiring experienced Mechanics in your area! Who You Are: As a Mechanic, you will perform preventative maintenance, diagnosis, service and repair of steering, suspension, brakes, engines, transmissions, differentials, electrical, wheelchair lifts, and air conditioning systems. Successful applicants must be able to work safely, perform part analysis on damaged parts and assist in inventory control or other duties, as necessary. What’s in it for YOU: • Competitive Pay Rates!, • 40 hours a week, not flat rate, • Tools are supplied!, • OT as needed over 40 hours, • Full Benefits: Medical, Vision, Dental, and 401K plan, • Paid vacation, • Company provided uniform, • Corporate partner discount program, • Diagnoses, examines, and investigates vehicles to determine causes of defective operation of vehicle systems and components., • Perform scheduled preventative maintenance of vehicles, • Execute major and minor repairs of defective components., • Document all activities in MV’s Fleet Management System., • High school diploma or equivalent., • Combination of at least one (1) to two (2) years of apprentice level verifiable training and experience in automotive or diesel mechanics, which may include high school mechanics courses and/or a regional occupational program. MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment. #appcast

Overview: If you reside in California, please see our ___ for more information about our data handling practices and your data rights. Responsibilities: Let MV Transportation expand your toolbox! Do you want a stable career with great and steady pay, a set schedule, and outstanding benefits?! Would you like to work with a company that invests in your growth? Then join the MV Transportation team. Start on the path in under 5 minutes by reading the job description and submitting your application. MV Transportation is now hiring experienced Mechanics in your area! Who You Are: As a Mechanic, you will perform preventative maintenance, diagnosis, service and repair of steering, suspension, brakes, engines, transmissions, differentials, electrical, wheelchair lifts, and air conditioning systems. Successful applicants must be able to work safely, perform part analysis on damaged parts and assist in inventory control or other duties, as necessary. What’s in it for YOU: • Competitive Pay Rates!, • 40 hours a week, not flat rate, • OT as needed over 40 hours, • Full Benefits: Medical, Vision, Dental, and 401K plan, • Paid vacation, • Company provided uniform, • Corporate partner discount program, • Diagnoses, examines, and investigates vehicles to determine causes of defective operation of vehicle systems and components., • Perform scheduled preventative maintenance of vehicles, • Execute major and minor repairs of defective components., • Document all activities in MV’s Fleet Management System., • High school diploma or equivalent., • Combination of at least two (2) to three (3) years of apprentice level verifiable training and experience in automotive or diesel mechanics, which may include high school mechanics courses and/or a regional occupational program. MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment. #appcast

Job Description Overview Tradesmen International is looking to expand our team of qualified Trade Professionals for current & future projects in and around Bellflower, CA. Most positions are first shift with an average pay scale of $28-40/hour based on experience & skill level. If you are a Plumber Journeyman or Apprentice and want to work alongside other proven Craftsmen who emphasize safety, productivity and superior workmanship, this is your chance to advance your career! Job Scope: • Commercial & Residential Service, Maintenance & Installs, • Rough Ins, • Running PVC, CPVC & Pex, • Plumbing Overhead Mains, • 2+ Years of Experience in the Field, • Basic Hand Tools for the Trade, • Wear Proper PPE Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Vacation Pay, • Health insurance, • 401(k) profit-sharing savings plan, • Incentive programs Click here to visit Tradesmen’s full website.

Job Description Description: If you have Stone Mason experience and you're looking for a new position ASAP, then this is the position for you! A popular Cement company in who mainly works in San Fernando Valley and Santa Clarita is looking for multiple Stone Masons and Mason Apprentices to join their team! There is rapid interview process with the company so you can start ASAP! Relevant Skills (not required): Stone Mason / Brick Laying / Mason Apprentice or Tending Experience Level: Entry - Expert Level Location: San Fernando and Santa Clarita Pay: $20-37 depending on experience maybe more Shift: Mon - Fri 7am - 4pm Apply right now and expect a call/text from Ryan with Aerotek 😊 Positions with this company are limited and will be filled quickly! Job Type & Location This is a Contract to Hire position based out of Lake View Terrace, CA 91342. Pay and Benefits The pay range for this position is $20.00 - $40.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Lake View Terrace,CA 91342. Application Deadline This position is anticipated to close on Mar 5, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Baker Overview: Tierra Mia Coffee Company is a craft coffee roaster and bakery with cafes in Northern and Southern California. Our mission is to provide our customers the highest quality Latin-inspired coffee, beverages, and pastries in a setting that is warm, inviting, contemporary, and authentically Latino. Established in 2008, we have since expanded into 20 cafés and growing. We are currently seeking highly motivated, hard-working, and energetic individuals for the position of Baker at our bakery in the Lincoln Heights neighborhood of Los Angeles, CA. Our bakery bakes pastries fresh, 7 days a week for all of our Southern California locations. As a Baker you will be expected to work in a team to fulfill the daily pastry orders. The ideal candidate is responsible, respectful and eager to learn and grow within the company. Food service experience is a plus but not required. Must be able to lift 50 lbs. Time Commitment: Approximately 30 hours per week; overnight shifts; weekdays and weekends Compensation: Starting at $17.50/hr Duties/Responsibilities: • Follow recipes and bakery guidelines to produce and prepare pastries for daily morning deliveries., • Maintain a clean and organized work area at your station, common areas, and throughout our bakery., • Work together as a team with other bakers to create a positive and respectful work environment for all employees., • Abide by policies and standards in place to ensure a safe and sanitary workplace.

Job DescriptionSalary: $18-$22 Job Title: Plumber Apprentice Position Type: Full-time Job Summary: We are looking for a dedicated and motivated Plumber Apprentice to join our team. This is an entry-level role designed for individuals eager to learn the plumbing trade. Under the guidance of experienced plumbers, you will gain hands-on experience with installation, maintenance, and repair of plumbing systems in residential, commercial, and industrial settings. Responsibilities: • Assist licensed plumbers with installing, repairing, and maintaining plumbing systems and fixtures., • Carry and transport tools, equipment, and materials to and from job sites., • Cut, assemble, and install pipes using specialized tools and equipment., • Read and interpret blueprints and technical diagrams., • Learn and apply safety protocols, codes, and regulations., • Perform routine maintenance and inspections on plumbing systems., • Ensure the workspace is clean and organized after each task., • High school diploma or equivalent (GED)., • Willingness to learn and follow directions., • Ability to lift heavy equipment and work in confined spaces., • Strong manual dexterity and physical stamina., • Basic math skills and ability to measure accurately., • Excellent communication skills and a positive attitude., • Valid drivers license and reliable transportation., • (Preferred) Prior experience in construction or a related field. Applicants must be authorized to work in the U.S. and have proofto be considered for this position.

Job Description General Responsibility: The duties of the Plumbing Rough Installer are to install functional plumbing system(s) components at construction job site according to job specifications and piece price. Significant Duties: • Interprets ISO metric plumbing drawings and layout pipes, drainage systems, • Installs pipes and fixtures, such as sinks, toilets and water heaters to 100% completion, • Install underground soil pipes for drainage in plumbing ditches, • Installs support blocks for pipes prior to pipe installation, • Assembles, installs prefab material, fittings and valves for installation, • Modifies length of pipes and other plumbing materials as needed, • Assemble pipe sections, tubing and fittings, using couplings, screws, bolts, cement, plastic solvent or soldering, • Performs all duties of a Plumbing Apprentice, • Uses saws, pipe cutters, drills and ladders as necessary, • Measures cut thread and install pipe to required angle, using hand and power tools or machines, • Collaborates with contractors, construction workers, electricians, carpenters, concrete, landscapers and drywallers in installing and repairing plumbing pipes, • Fill pipes with water or air and observe to detect leaks, • Performs inspections of plumbing systems to identify and replace damaged parts, • May oversee and direct workers such as apprentices, labors engaged in pipe cutting and installation of plumbing systems, • Analyses problem and identifies appropriate tools and materials for repair, • Follows health and safety standards and complies with building codes, • Travel to different jobsites as directed by management, • Performs within the values and guidelines of 20/20 and adheres to the 20/20 Policies and Procedures, • High school diploma or equivalent, • Four or more years’ of experience in construction, • Must have reliable transportation, • Mechanically inclined or has experience in plumbing, • Able to take directions for plumbing work to be done and perform tasks with limited supervision, • Knowledge in pipes, drainage and ventilation systems, • Experience reading ISO’s and blueprints, • Knowledge of the practices, methods, materials, tools, and equipment of the plumbing trade, • Must be familiar with aspects of plumbing from the ground through Topout Inspection 20/20 Plumbing & Heating, Inc. is committed to providing equal employment opportunities to all employees and applicants. Discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws is strictly prohibited. Company DescriptionAt 20/20 Plumbing & Heating, Inc., we are Employee Owners dedicated to building our communities. Since 2015, our organization has been a leader in the HVAC and plumbing industry throughout California and Nevada. We deliver reliable, state-of-the-art services to single-family, multi-family, commercial, rehabilitation and hospitality projects. Our mission is dedicated to Building Excellence Together and crafting a future marked by growth, innovation, and prosperity for all.At 20/20 Plumbing & Heating, Inc., we are Employee Owners dedicated to building our communities. Since 2015, our organization has been a leader in the HVAC and plumbing industry throughout California and Nevada. We deliver reliable, state-of-the-art services to single-family, multi-family, commercial, rehabilitation and hospitality projects. Our mission is dedicated to Building Excellence Together and crafting a future marked by growth, innovation, and prosperity for all.

Job Description North Anaheim based plumbing contractor seeking to fulfill two plumbing positions, Journeymen level and Apprenticeship applicants. The ideal applicant must be dependable, hard-working, honest, maintain a positive attitude with a clean professional appearance, and possess great customer service skills. Applying Applicants will adhere to the following: • Must have a flexible schedule and be willing to work some nights and weekends as needed., • Excellent attendance, dependability and reliability are essential., • Expected to be able to work independently and with others, depending on the scope of work., • Must have good communication skills to communicate effectively with customers., • Must be able to perform general physical activities common to the industry (i.e. climbing, lifting, walking, stooping, and handling of materials)., • Must be able to operate service truck and other equipment safely; possession of or ability to obtain a valid driver's license and a clean driving record., • Must have own hand tools (service truck, material, and large tools will be provided). Applicant must have sufficient knowledge and experience in residential service and repair of plumbing fixtures and systems, including water, waste, sewer, drainage, ventilation, and gas lines, including the various types of material used such as PEX and copper piping with extensive knowledge of leak detection, drain cleaning, reroutes, and hot water heater units (traditional and tankless). We are a diversified plumbing company that provides the apprentice applicant with education and knowledge to expand their skills in the plumbing industry to achieve journeyman level status. Apprentice Applicant — Rough-In Plumber Applicant must be responsible and self-motivated that specializes in rough-in plumbing (kitchen & bath remodels/additions) to aide in completing projects and assist in the rapid growth of a reputable company. The applicant must be able to work independently with minimal supervision (on occasion), and the ability to troubleshoot various plumbing issues; deciphering blueprints is a plus! Personal Skills: Each candidate is expected to have a positive attitude and be able to work with their fellow employees and managers. Compensation: The hourly pay rate will commensurate with experience. Premium hourly wage rates with options for bonuses. Locations: The shop/office is located in North Orange County. Job site locations include Orange County, Riverside County, LA County, with the dominate workload being in North Orange County. Positions: Available for immediate hire. All work-site locations are a non-smoking environment.

Job Description Job Title: Plumber Apprentice / Laborer Location: Sun Valley, California (Los Angeles County) Job Type: Full-Time Department: Plumbing Reports To: Master Plumber Technician / Foreman Position Summary: We are currently seeking a motivated and hardworking Plumber Apprentice / Laborer to join our team. This is an excellent opportunity to gain hands-on experience in the plumbing trade, working alongside experienced professionals on residential, commercial, and/or industrial projects. The ideal candidate will have a strong work ethic, a willingness to learn, and a commitment to safety and quality. Key Responsibilities: * Assist licensed plumbers with the installation, maintenance, and repair of plumbing systems * Carry tools, materials, and equipment to and from job sites * Perform basic labor tasks such as digging trenches, cutting and fitting pipes, and cleaning up job sites * Learn to read blueprints and technical drawings * Follow all company safety policies and procedures * Maintain tools and equipment in good working condition * Communicate effectively with team members, plumber tech and supervisors Qualifications: * High school diploma or GED preferred * Prior construction or plumbing experience is a plus but not required * Valid driver’s license and reliable transportation * Ability to lift 50+ lbs and perform physical labor in various weather conditions * Strong mechanical aptitude and eagerness to learn * Must be punctual, dependable, and safety-conscious * Enrollment or willingness to enroll in a registered plumbing apprenticeship program (as required) What We Offer: * Competitive hourly wage based on experience * On-the-job training and mentorship from experienced plumbers * Opportunities for advancement and career growth * Health, dental, and vision benefits * 401(k) plan * Life Insurance provided by our company * Safe and respectful work environment Pay Information: * Hourly Rate: $18.00 – $21.00 per hour * Pay is based on experience, skills, and qualifications. Candidates with previous plumbing, construction, or general labor experience may be eligible for a higher starting rate within the range. Regular performance reviews and opportunities for wage increases are provided based on job performance, reliability, and skill development. Work Schedule: * Typical Hours: Standard business hours (Monday–Friday, approximately 7:00 AM – 5:00 PM) * Schedule May Vary: Depending on project needs, including nights, early mornings, or weekends * Open availability is required While most work will be performed during regular daytime hours, some jobs may require overnight or off-hours work to meet deadlines, access job sites, or minimize disruptions to clients. Flexibility and a willingness to work varied shifts are essential for this role. If you feel you fit this role, we invite you to apply and submit a thorough resume with all skills and experienced listed. Team Rooter Plumbing looks forward to hearing from you!

Job Description Company Overview: Blvd Electric Inc is renowned in the electrical contracting industry for its commitment to excellence and innovation over the past decade. Our work culture prioritizes the comfort, success, and work-life balance of our team, making Blvd a workplace where professionals are empowered to thrive and grow. Join our team and contribute to a company that values your skills and dedication. Job Summary: We are seeking an Experienced Journeyman Electrician to handle complex electrical tasks and contribute to diverse projects across commercial and industrial settings. This role is suited for someone who is technically proficient, detail-oriented, and enjoys working in a dynamic, supportive environment. Key Responsibilities: • Install, maintain, and repair electrical systems in commercial and industrial facilities., • Interpret electrical blueprints, diagrams, and other technical documents., • Conduct system tests and troubleshoot issues to ensure installations are up to code., • Manage wiring, fixtures, and conduit installations efficiently., • Collaborate with project managers and other team members to meet deadlines and project specifications., • Provide guidance and mentorship to apprentice electricians., • Proven work experience as a Journeyman Electrician., • Deep understanding of electrical systems, tools, and equipment., • Strong problem-solving skills and attention to detail., • Competitive Salary: We offer a competitive wage reflecting your skills and experience., • Extensive Benefits Package: Includes health, dental, vision insurance, retirement plans, and generous PTO., • Professional Growth: Continuous learning opportunities and career advancement. Resumen del Puesto: Buscamos un Electricista Oficial Experimentado para manejar tareas eléctricas complejas y contribuir en proyectos diversos en entornos comerciales e industriales. Este rol es adecuado para alguien que es técnicamente competente, detallista y disfruta trabajando en un entorno dinámico y de apoyo. Responsabilidades Clave: • Instalar, mantener y reparar sistemas eléctricos en instalaciones comerciales e industriales., • Interpretar planos eléctricos, diagramas y otros documentos técnicos., • Realizar pruebas del sistema y solucionar problemas para asegurar que las instalaciones cumplan con los códigos., • Gestionar de manera eficiente la instalación de cableado, accesorios y conducciones., • Colaborar con los gerentes de proyecto y otros miembros del equipo para cumplir con los plazos y especificaciones del proyecto., • Proporcionar orientación y mentoría a los electricistas aprendices., • Asegurar el cumplimiento de las prácticas de seguridad y las normativas y regulaciones en todo momento.Company DescriptionBlvd Electric Inc has found over a decade of success by committing itself to its teams comfort, success, and work/life balance before anything else. Blvd believes to be successful in its work first and foremost we must enjoy our work environment. Our commitment to empowering people and powering projects is realized by our exceptional team of dedicated and highly skilled experts working together and never settling for good enough. Join our team and see why our team members stay with us for years and years to come.Blvd Electric Inc has found over a decade of success by committing itself to its teams comfort, success, and work/life balance before anything else. Blvd believes to be successful in its work first and foremost we must enjoy our work environment. Our commitment to empowering people and powering projects is realized by our exceptional team of dedicated and highly skilled experts working together and never settling for good enough. Join our team and see why our team members stay with us for years and years to come.

Job Description Join our team in Los Angeles! Electrician Apprentice is two-fold: a) assist Electricians in performing the operations of the Company’s jobs and, b) learn operation efficiency, safety, adherence to schedules, and the proper handling of materials and supplies by a certified Electrician. The Apprentice Electrician must learn the functions of an electrician sufficiently enough to eventually pass the California State test for certification as an Electrician. * • MUST HAVE A MINIMUM OF TWO YEARS OF EXPERIENCE, • Ensure that all tools and materials are used in a safe, damage-free, and efficient manner, as directed by the assigned supervisor., • Perform all assigned lessons in installation and finish processes in an accurate, timely, and efficient manner., • Adhere to all established safety standards and procedures as established by the Company., • Seek out methods, processes, and procedures to benefit the company., • Clock in and out according to company policy., • Notify Field Supervisor or supervising Electrician immediately of safety issues, schedule problems, client requests, or other problems as and when they arise., • Maintain good, business-like relations with other trades, suppliers, and clients., • Adhere to Company policies with regard to ethics, conduct, and appearance., • Must follow all company policies and procedures. Company DescriptionPowerfull Electric Inc. is an electrical contracting company dedicated to providing luxury residential homeowners with revolutionary technologically advanced electrical systems. We provide white glove service, unmatched quality and custom craftsmanship for our clients both during construction and the lifespan of your estate. Our employees are our backbone and they are the technical experts in all aspects of design, development, planning, executing and administration of all your electrical needs. We are POWERFULL ELECTRIC!Powerfull Electric Inc. is an electrical contracting company dedicated to providing luxury residential homeowners with revolutionary technologically advanced electrical systems. \r\n\r\nWe provide white glove service, unmatched quality and custom craftsmanship for our clients both during construction and the lifespan of your estate. \r\nOur employees are our backbone and they are the technical experts in all aspects of design, development, planning, executing and administration of all your electrical needs. \r\nWe are POWERFULL ELECTRIC!

Job Description Electrician- $18-$42/hr - DOE We are currently hiring Electricians with 2+ years of experience performing electrical installations in a commercial environment. Candidates are encouraged to apply ASAP as we have an immediate need in the Los Angeles Area and beyond. Please apply today by calling/texting Jamie at 310-341-4796 or emailing your resume to or apply directly to this posting by clicking “Apply” below. Apprentice Electrician Duties: • Cutting, bending, threading and running electrical conduit materials, • Pulling electrical wiring through electrical conduit, • Terminating electrical panels, set fixtures, outlets, and various electrical devices, • Installing and connecting wires to circuit breakers, transformers, outlets, or other components and systems Apprentice Electrician Qualifications: • Current State Electrical License is preferred but not needed, • Recent experience performing electrical installations in a commercial setting, • Familiar with the most updated NEC codes, • Your own tools and PPE (safety gear), • Experience reading and interpreting blueprints Compensation: • Competitive starting pay $18 -$42/hr or depending on experience, • Get paid weekly!, • Option to enroll in Medical, Dental, Vision, and contribute to 401K, • Referral Bonuses of $250 and up for referrals that result in a placement Company DescriptionOutsource is the Nation's leading provider of low voltage, electrical, and plumbing talent. We work EXCLUSIVELY in electrical, plumbing, and low-voltage, and have been placing candidates of all levels with the right companies since 1998 so we know a thing or two about making a good match. Outsource is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, gender, sexual orientation, gender identity or expression, religion, national origin, marital status, age, disability, veteran status, genetic information, or any other protected status.Outsource is the Nation's leading provider of low voltage, electrical, and plumbing talent. We work EXCLUSIVELY in electrical, plumbing, and low-voltage, and have been placing candidates of all levels with the right companies since 1998 so we know a thing or two about making a good match. \r\n\r\nOutsource is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, gender, sexual orientation, gender identity or expression, religion, national origin, marital status, age, disability, veteran status, genetic information, or any other protected status.

Job Description Job Requirements: • Minimum 2-3 years of residential or commercial electrical experience, • Must have an E.T. card or be a certified Electrician, • Ability to complete a panel change, • Experience with backup generators or automotive work is a plus, • Must speak and read English fluently, • A reliable vehicle, a valid driver’s license, and a clean driving record are required, • Availability to work overtime and weekends when needed Compensation & Benefits: • Competitive pay: $60,000 - $75,000 per year, • Employer-paid medical, dental, and vision plans, • 401(k) matching

Job Description LA BOILER TECHNICIAN Job Description Immediate Opening: Full-Time Boiler Service Technician in the Los Angeles Area of California. (Training Provided) We are interested in a quality, career minded technician to join our team. Benefits: • Annual Pay $53k to $90k, based on experience. This is position is available for training/apprentice, • Core Work period is Monday – Friday, 8 am to 4:30 pm + some OT. Position is required to participation with other technicians on rotating On-Call schedule., • Service Truck, Insurance and Fuel costs provided after completion of training period (for Company Use Only)., • Flexible Paid PTO (range 96 hrs. to 176 hrs. each year)., • 9 Paid Holidays., • Medical, Dental, Vision, Disability & Life Insurance offered., • Retirement 401k Program offered with Employer contribution., • Uniform and cleaning service provided., • All power tools company provided. Boiler Technician’s Day to day activity include: Working with our clients in the hotel and restaurant industries, as well as apartment complexes on Raypack, Laars, Lochinvar, RBI Hot Water Boiler Equipment and Noritz, Takagi, and Rheem Water Heaters. • Drive to our customer's site and perform maintenance and emergency repairs on Boilers and Water Heaters., • Repair/replace water/gas piping., • Troubleshoot and diagnosis emergency repairs for Boilers and Water Heaters., • Complete all necessary repairs on customer's job sites., • Repair/replace 30 to 200-gallon Water Heaters., • Flush/repair/replace 30 to 200-gallon Storage Tanks., • Complete leak repairs on copper pipe., • Participate with installation of new boilers., • Currently have and maintain a clean driving record., • Must be 21+ years of age to be insurable by the company’s auto insurance carrier., • Strong mechanical aptitude., • A strong team-player with excellent communication skills (Verbal and Written)., • Excellent customer service skills., • Ability to accept written and verbal direction from supervisors and dispatchers., • Must be physically able to perform all necessary job responsibilities., • Valid CA Driver License with a good driving record. Must sustain insurable status with company’s auto insurance carrier while employed., • Able to lift up to 50 lbs (as needed), • Must pass pre-employment Drug Screening process, clear Criminal Background Check and pass E-Verify Screening prior to hiring. *

Job Description Tierra Mia Coffee Company Job Listing Barista Overview: Tierra Mia Coffee Company is a craft coffee roaster with cafes in Northern and Southern California. Our mission is to provide our customers the highest quality Latin-inspired coffee, beverages, and pastries in a setting that is warm, inviting, contemporary, and authentically Latino. Established in 2008, we have since expanded into 18 cafés, and growing. We are currently seeking highly motivated and energetic individuals for the position of Barista at our DTLA location. As a Barista you will be expected to provide a positive Tierra Mia Coffee experience to all customers and individuals that visit our store. The ideal candidate is responsible, respectful, and eager to learn and grow within the company. Must be willing to work well in a team setting and maintain a positive and friendly demeanor when communicating with fellow baristas and customers. Time Commitment: Part-time, 20 – 25 weekly hours, weekdays and weekends. Compensation: Starting at $15.50/hr. Duties/Responsibilities: • Provide warm, respectful, friendly, attentive, and quick service to our customers., • Create craft coffee drinks: pour-overs, espresso beverages, and ice blended drinks in the highest quality manner possible., • Maintain a clean and spotless work area at our bar, register areas, and throughout our store., • Work together as a team with other baristas to create a positive Tierra Mia Coffee experience for customers and employees., • Enter orders into POS (point-of-sale) system and tender transactions., • Serve pastries from pastry case, following proper sanitation methods.

Job DescriptionHave you ever thought about shaping the next generation of HVAC Residential Install Technicians by teaching real world experience to eager apprentices? If you are a residential HVAC professional who is ready to get out of the field and make a career in changing lives, the HVAC Instructor position at AirTech HVAC in Pasadena, CA is the job you have been looking for! This is a part-time position teaching our residential install apprentices the art of the HVAC trade in the custom-built AirTech HVAC Training Center.Duties and Responsibilities:· Follow custom structured course curriculum, objectives, and evaluation mechanisms for the program· Enforce all local codes and OSHA safety regulations· Document apprentice performance, behavior and achievement· Communicate with Install Manager regarding apprentices’ progress· Evaluate and update curriculum relevancy on an ongoing basis· Perform all duties in accordance with company policies and procedures· Other duties as assigned Hours/Schedule: · Part-time· Monday through Friday· Mornings (6:00 AM – 10:00 AM) AirTech HVAC is a well-established second-generation heating and air conditioning company that has been servicing the San Gabriel Valley and surrounding areas since 1988. Requirements: · EPA Certified· Minimum of 7 years of direct HVAC field experience· Prior teaching experience preferred· Excellent communication and interpersonal skills· Highly organized, motivated and results driven If it sounds like being an AirTech HVAC Instructor is right for you, please apply right away. E04JI800rkcr4084if3

Job Description Job description Culver City Private Practice providing vision care for 20 years. We are seeking a self-motivated individual with exceptional customer service skills. We are a family-oriented optometric practice and pride ourselves with a long tradition of excellent and uncompromising patient care. You must be detail-oriented, a team player and have multitasking capability. Just as important, you must have a caring, friendly and outgoing personality with a positive attitude. Needless to say, a hard-working mentality is a must. No optical experience necessary, will train the right candidate with background in sales/customer service Job duties include but not limited: * Using optical equipment to obtain patient measurements * Receiving & verifying eyeglasses & contact lenses * Understanding insurance authorizations & billing * Contact lens sales * Frame styling * Lens selection * Light housekeeping This is an entry level position that often leads to a career without the need of formal education. The right candidate possesses a positive, professional attitude with outstanding communication skills. Customer service, computer, & math skills are required. Must be available Saturdays. Work Remotely * No Job Types: Full-time, Part-time, Temporary Base Pay: From $16.25 per hour Monthly Bonus Opportunity $2 - $5 additional per hour Benefits: * Employee discount * Flexible schedule * Health insurance * Paid time off * Paid parking in covered garage Schedule: * 8 hour shift * 6 hour shift * 4 hour shift * Weekend availability * Major holidays off Supplemental pay types: * Bonus pay This Job Is Ideal for Someone Who Is: * Dependable -- reliable and punctual * People-oriented -- enjoys interacting with people and working on group projects * Adaptable/flexible -- enjoys doing work that requires frequent shifts in direction * Detail-oriented -- would rather focus on the details of work than the bigger picture

Job Description Position: Apprentice Automotive Technician Location: Downtown LA, Beverly Hills, & Torrence CA Job Type: Full-Time Apprenticeship - This is a fully funded training and development opportunity Pay: Training Wage for On-the-Job Learning - $18.00 / All materials, schooling, and tools are provided. Apprentices will be sponsored by a dealership for a no cost career pathway About the Role We’re looking for a new generation of talent to get hands on and explore the career path of an Automotive Technician. This is a great opportunity for someone who is eager to learn the automotive trade hands-on while working alongside experienced technicians in a supportive shop environment. Whether you’re coming out of a technical program or just starting your career in automotive repair, we want to help you grow your skills and build a long-term future in the industry. What You’ll Do As an Apprentice Technician, you will assist with a wide range of automotive maintenance and repair tasks, including: • Supporting senior technicians with vehicle inspections and repairs, • Performing basic services such as oil changes, tire rotations, and fluid checks, • Learning diagnostic procedures and proper use of shop equipment, • Maintaining a clean and safe work area, • Communicating clearly with team members and service advisors, • Participating in training and skill development opportunities on the job, • Attend classroom training and complete independent theory studies at your own pace. What We’re Looking For Our apprenticeship is fully sponsored by the dealerships in need of technicians for the future. Apprentices are developing fundamentals and career paths with their host dealership to go from apprentice to line tech and succeed in a flat rate environment, where you are paid for your skills and abilities. Applicants must be: • Interested in starting a career as an automotive technician, • Dependable, hardworking, and eager to learn, • Comfortable working in a fast-paced shop environment, • Able to follow instructions and safety procedures, • Enrolled in or recently graduated from an automotive program (preferred but not required), • Demonstrate a professional attitude, with strong verbal and written communication, • Able to use tools and mechanical equipment and demonstrate a strong mechanical aptitude, • Holds a valid driver’s license with an acceptable driver's history with limited infractions or moving violations What We Offer • On-the-job training with experienced technicians, • Opportunities for advancement and certification support (ASE & Department of Labor Journeyman Certification), • Career development coaching, soft skills coaching, and professional development assistance, • Registered Apprenticeship with the U.S. Department of Labor & California Department of Apprenticeship Standards, • Tool access, uniforms, PPE, and more to help you succeed on the job, • One on One mentorship and career assistance, • Benefits Include:, • Free tuition, • Medical, Dental, Vision, • PTO & Sick Time, • Employee Assistance Support, • LifeMart Discount center via ADP, • Phone Stipend for Data Usage, • GI Bill support for veterans enrolled in apprenticeship program

Job DescriptionSalary: $17.00 Who We Are Synergy Companies help to provide no-cost energy-saving programs to applicants of the local public utilities. We are a subcontractor for the local natural gas, electric, and water utility companies of Southern California. We have teamed up with these utilities to provide their customers with measures/items that we install to reduce the home's electricity or natural gas usage.Synergy Companies has over 40 years of experience working with these utility companies. If you're looking to join a team that has a great work environment, competitive pay, and health benefits and is constantly evolving to accommodate new and improved technological advances to residential homes and businesses, Synergy Companies is the future for you! Job Description Are you new to the plumbing trade and looking to pursue a different job field? Synergy Companies is looking for a Water Heater Technician Apprentice to join our team. Synergy Companies works with Southern California utility companies to install water heaters at low or even no cost for our customers. Candidates with experience in plumbing and electric work are preferred but not required. We are looking for motivated people who enjoy working with their hands. Individuals who are able to problem solve and think for themselves are a great fit for this position. This position will include steady, year-round employment. Duties/Expectations: • Willing to learn and follow instructions, • Attend company meetings as required, • Be responsible for company equipment and vehicle, • Provide top-quality customer service, • Be comfortable with selling additional upgrades to the customer, • Physically able to lift and move equipment, • Willing to work with hands, • Being on time for scheduled appointments and meetings Skills/Qualifications: • Pass Drug and background screening, • High school graduate or GED, • Competent in working with your hands and power tools, • Customer etiquette and communication, • Problem-solving, • Tech savvy (comfortable with computers, tablets, cell phones, and Google based programs), • Valid Driver's License and good Driving Record, • Able to work both independently and as part of a team, • Bilingual a plus Benefits Include: • Paid training, • All equipment and tools needed for the job are provided, • Vehicle and fuel card provided, • Health benefits available for full-time employees - Employee's insurance is covered with the option of family coverage to be added at the employee's expense, • Paid vacation after 1 year of full-time employment, • Company 401k matching plan available after 1 year of employment, • Ongoing training, incentives, and career development, • Overtime Available

Job Description Great Opportunity to Join a Stable Family Owned Company with a great work/life balance. Now Hiring an Auto Mechanic! If you are interested in a good job and good benefits, a GREAT environment, Team Work and a lot more, Then you may owe it to yourself to check us out!!! Only a one spot open!!! Must be an Energetic Team Player With Professionalism, Passionate About Helping People *** PTO, Medical, Vision and Dental Care Benefits If you're a Mechanic or a Mechanic's Apprentice looking for growth with a company that will help you perfect your craft and continue to invest in you, this is the opportunity for you. We are proud to offer a family-style work environment and above market pay, in addition to competitive benefits packages. This position is ideal for someone who is eager to immediately start working towards a Career. Benefits: • Paid Time Off, • Must work well individually and as part of a team., • Follow the outline of the company policies and procedures., • Communicate professionally and respectfully with customers, office staff and coworkers., • Some experience servicing, repairing and basic oil changes, and other tasks as assigned. Background and Drug Screening will be done before an offer is made.

Job DescriptionJob Description: The Lube Technician is expected to: Protect the legal, financial and moral well-being of the dealership; Perform lube, oil, filter and multipoint service for customer vehicles; Be a teacher to support the efforts of other employees to be successful. Seek ways to improve business operations efficiencies and customer service. Primary Duties: 1. Ensure maximum productivity, customer service and cost control. Perform all lube, oil, filter and multi-point inspection processes to ensure proper diagnoses. Assess any supplemental vehicle needs. Perform quality service at all times and notify management of any substandard processes, parts or procedures. Maintain clean vehicles during all servicing and repairs. Achieve customer service satisfaction through prompt and accurate service and communication. Maintain a clean and safe work environment at all times and adhere to all OSHA/EPA requirements. Perform all job duties requested by management. 2. Operate with integrity: Demand the highest ethical standards from self and others. Set an example of positive attitude and professionalism, including a neat, orderly and safe work environment. Set an example of outstanding attendance, positive attitude, professionalism, including orderly and safe work environment. Maintain a neat, orderly and safe work environment Job Requirement:Job Qualifications: High school diploma or the equivalent recommended but not required. One year experience as a technician's assistant or apprentice. Maintain valid driver's license and MVR within company policy requirements. Local state inspection license preferred Physical Requirements: Work performed in shop setting While performing the duties of this job, the employee is exposed to weather conditions precedent at that time. Exposure to shop environment such as noise, dust, odors and fumes, chemicals and adhesives. Required to lift up to a minimum of 100 lbs. Regularly required to sit, stand, bend, reach, talk, hear, use hands and fingers, handle or operate objects, tools or controls. Occasionally required to stoop, kneel or crouch. Required vision include close vision, distance vision, peripheral vision and the ability to adjust focus. Required to operate equipment and move vehicles in a safe manner at all times. To perform the job successfully, an individual should demonstrate the following competencies to perform the essential functions of this position: Leadership- the individual demonstrates ethical and followership behaviors which promotes our company standards resulting in a cohesive and effective team. Compliance- the individual understands and adheres to all Company standards, state and federal laws and regulations as well as product pricing guidelines of all lenders, agencies or business partners. Customer Service- the individual understands his/her role in providing excellent customer service through the defined processes which promote efficiencies, fairness and cost effectiveness. Ethics/Integrity- the individual represents the dealership by conducting his/her self in a professional and courteous business manner that demonstrates integrity and avoids the actual or perception of a conflict of interest. Oral Communication- the individual clearly identifies and professionally expresses issues in positive or negative situations. Planning/Organizing- the individual prioritizes and plans work activities and uses time efficiently. Quality- the individual demonstrates accuracy and thoroughness and monitors own work to ensure quality. Dependability- the individual is consistently at work and on time, follows instructions, responds to management direction and solicits feedback to improve performance. Safety and Security- the individual observes safety and security procedures and uses equipment and materials properly. Benefits Include: Our team members enjoy a positive working environment with opportunities for professional growth through training and advancement from within the organization. Our team members also enjoy a comprehensive benefits program including: Medical, Employee discounts on vehicle purchases, parts and service Paid-time-off Comprehensive employee recognition programs. Continued training through the manufacturer. Opportunities for career advancement. When you join our organization, you'll enjoy comprehensive training, competitive compensation, and unparalleled benefits. Simply put, you'll experience the best that a career in the automotive industry has to offer. The above statements are intended to describe the general nature and level of the work being performed by people assigned to this work. This is not an exhaustive list of all duties and responsibilities. We reserve the right to amend and change responsibilities to meet business and organizational needs as necessary. We are an Equal Opportunity Employer and a drug free workplace. We Would Love To Talk With You! Apply By Clicking The 'Apply Now' Button

Job DescriptionCompany Description W.I. Simonson, is a Sonic Automotive Dealership. Sonic Automotive is a Fortune 500 company that is transforming the way people shop for, buy and service their vehicles. Our talented team work together to ensure we provide an experience unmatched by our competitors. Salary: $45-65 flag hours Sign on bonus of $15k for qualified technicians Our associates are happy to work here because: • We boast the lowest turnover in the industry., • We provide award winning training (Training Magazine Top 125, and Brandon Hall Awards)., • We are committed to developing and promoting within the company., • We are technology based - most jobs use IPads or IPhones that we provide., • Our benefits are extremely competitive with Medical, dental, vision, HSA, 401k and PTO., • We encourage peer to peer teamwork and recognition., • Special benefits to purchasing and leasing a car. We're proud of what we're doing here. Come and join us! Job Description The Service Technician is responsible for performing vehicle repair and maintenance work as assigned in accordance with dealer and factory standards. S/he also will oversee the work of any apprentice technician assigned to him/her. Duties and Responsibilities: · Receive repair orders from dispatcher and take to stall area. · Perform work as outlined on repair order with efficiency and accuracy, in accordance with dealership and factory standards. · Diagnose cause of any malfunction and perform repair. · Communicate with parts department to obtain needed parts. · Save and tag parts if the job is under warranty or if requested by the customer. · Examine the vehicle to determine if additional safety or service work is required. · Notify service advisor immediately if additional work outlined is not needed or required. · Notify service advisor immediately if repairs cannot be completed within the time promised. · Document work performed. · Road-test vehicles when required or refer to the test technician, keeping in mind that the customer vehicle should not be used for personal errands. · Supervise work of any apprentice technicians as assigned. · Attend factory-sponsored training classes. · Keep abreast of factory technical bulletins. · Ensure that customers’ cars are kept clean. · Keep shop area neat, clean, and be able to account for all dealership-owned tools at all times. · Understand and follow federal, state and local regulations, such as those governing the disposal of hazardous wastes. · Must follow all company safety policies and procedures, and immediately report any and all accidents to a manager or supervisor. Qualifications High CSI is a must. · ASE or manufacturing training. · High school diploma or the equivalent. · Valid driver’s license and a good driving record. · Manual dexterity. · Good Judgment. · All applicants must be authorized to work in the USA. · All applicants must perform duties and responsibilities in a safe manner. · All applicants must be able to demonstrate ability to pass pre-employment testing to include background checks, MVR, drug test, and valid driver license. Additional Information It's time to make the most important move of your career. From our cooperative, team-based approach, to our more than 1,000 internal advancements each year, it's easy to see the difference. When you join our organization, you'll enjoy comprehensive training, competitive compensation, and unparalleled benefits. Simply put, you'll experience the best that a career in the automotive industry has to offer. All your information will be kept confidential according to EEO guidelines. (The Technician Position has a Pay Scale consisting of the following elements and ranges. Wages include Base Hourly Compensation of between $45.00-65.00.)

Job Description At Senra Systems, we believe that the future of manufacturing lies not in automation, but in configuration. We supercharge electrical wire harness manufacturing through software configuration, transforming skilled assembly tasks into high-throughput production lines. We enable customers to design what they want, when they want it and deliver harness builds at record-breaking speed. In this role, you will work as an early member of our manufacturing team to build wire harness assemblies and operate machinery. You will also work closely with other engineers and other technicians to design, develop, and iterate on the material process flow for the factory. What you'll own: • Work in a high pace environment to manufacture wire harnesses for critical aerospace and defense applications, • Responsible for cutting wires, running complex machinery, and labeling applications, • Be involved in ideation, planning, and execution stages of product development, • Manufacturing electrical harness assemblies, including ability to correctly interpret schematics and build compliant electrical assemblies as well as demonstrated knowledge of basic electrical tests such as continuity and insulation resistance., • Work cross-functionally with teams across the organization to understand their technology needs and build solutions accordingly, • Write documentation for development processes and operations, • Adapt to change quickly and stay up-to-date with new technologies and tools that can benefit the organization, • Occasionally provide technical support to customers and help improve the overall customer experience, eventually participate in on-call rotation as the company grows, • No prior wire harness experience is required. Senra is committed to training hard working individuals who are excited for not just a job, but a long standing career., • High school diploma or equivalent certification and 1+ years in a manufacturing or customer service environment or an associates degree in engineering, math, or science, • Has worked in a fast paced environment such as construction, food services, or manufacturing, • Ability to review work instructions and multitask, • Has a team-oriented attitude and will take pride in their work, • Ability to lift up to 25 lbs. unassisted., • Ability to stand for extended periods (minimum of 8 hours)., • Experience working with electronics such as building a home computer, manufacturing wire harnesses, electromechanical assembly, or environmental testing, • Experience working at an Aerospace and Defense company, • Experience reading electrical schematics, • Compensation will be based on experience, qualifications, and other job-related factors., • Unmatched opportunities to drive impact on a friendly and mission-driven team, • Own a piece of the pie with equity participation!, • Comprehensive medical, dental, vision, life and long-term disability coverage, • Flexible Spending Account (FSA) and Dependent Spending Account (DSA) for health-related expenses, • 20 vacation days per year and 12 company holidays for rest and relaxation, • a 401(k) plan to set yourself up for retirement, • Choose a record you love, and we'll add it to our growing vinyl collection!, • $50/month DoorDash credit – lunch is on us!, • Up to $100/month reimbursement for gym memberships, • Fully stocked kitchen with snacks and beverages, • Regular team-building events, lunches, and the occasional breakfast burrito!, • Bright, open office with communal spaces for collaboration and free parking ITAR REQUIREMENTS: • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Pay range$18—$23.50 USD

Job DescriptionDescription: SUMMARY Functions as a skilled-level technician who is able to perform diagnoses and repairs in all areas, in addition to being specialized in particular areas of repair, and who has previously worked as a B Class general service technician. ESSENTIAL DUTIES Essential Duties include the following. Other duties may be assigned. Performs work as outlined on repair order with efficiency and accuracy, in accordance with dealership and factory standards. Diagnoses cause of any malfunction and performs repair. Communicates with parts department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines assigned vehicle to determine if further safety or service work is required or recommended. Communicates with service advisor immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair order. Road tests vehicles when required or refers to the test technician. Participates in manufacturer-sponsored training programs, schools, and events. Actively pursue next certification level with manufacturer. Actively pursues Automotive related ASE certifications. Keeps abreast of manufacturer technical bulletins. Keeps up to date using manufacturer computer programs as well as Dealer DMS Supervises work of any apprentice technicians as assigned. Reports machinery defects or malfunctions to supervisor. Ensures that customers' cars are kept clean. Notify service advisor immediately of anything that has happened to change the appearance or condition of the vehicle. Keeps shop area neat and clean, mandatory cleaning and mopping of stall at end of each shift. Maintains and is accountable for all dealership-owned tools and manuals. Returns them to the proper place and in the same condition as they were received. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Immediately report to management any situation or condition that jeopardizes the safety, welfare, or integrity of the dealership, its employees, or customers. Comply with all company policies as required. ie: Meal and rest period policy, timekeeping, etc. Please refer to the Employee Handbook for further detail. Complete all required HR training modules in KPA Complete all required certification courses respective to position. Maintain a valid driver’s license and immediately inform management of any changes in its status. Maintain a professional appearance. i.e.: a high level of personal grooming, hygiene, and uniform appearance. Benefits · Medical Insurance · Dental Insurance · Vision Insurance · Life Insurance · Paid Vacation (after 1 year of employment) · Paid Sick time · 401(k) Requirements: QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE · Two to four years related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS · Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. · Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS · Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY · Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. CERTIFICATES, LICENSES, REGISTRATIONS Automotive Service Excellence (ASE) Certifications Automatic Transmission/Transaxle Certification for Auto/Light Truck Brakes Certification for Auto/Light Truck Electrical/Electronic Systems Certification for Auto/Light Truck Engine Performance Certification for Auto/Light Truck Engine Repair Certification for Auto/Light Truck Heating and Air Conditioning Certification for Auto/Light Truck Manual Drive Train and Axle Certification for Auto/Light Truck Suspension and Steering Certification for Auto/Light Truck Advanced Series - Automobile Advanced Engine Performance Certification Manufacturer Training State Emission Certification Valid Driver's License, with insurable driving record is a must. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description Department/Location: Service/ NSO Offices “Nationwide” Job Title: National Service Officer Apprentice Reports To: NSO Supervisor Salary Grade: Grade 10 ($20.18 - $31.39/hour) Type of position: ý Full-time o Part-time Hours: 40 hr/week o Exempt ý Nonexempt Job Summary: The following statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. This position encompasses the initial training period to achieve the designation of National Service Officer (NSO). The NSO Apprentice will study and train (via DAV’s on-the-job training program) to act as a representative for individual veterans (and their families) pursuing disability claims and other benefits from the United States Department of Veterans Affairs and, on occasion, other government entities. Essential Functions: • Acquire and maintain knowledge of all laws and regulations pertaining to veterans benefits through regular review of the Code of Federal Regulations and other publications and, where appropriate, decisions of the United States Court of Appeals for Veterans Claims., • Learn how to conduct detailed interviews of veterans to elicit information so that all potential benefits can be identified., • Review service records and other pertinent data, including medical records, to identify and/or assess validity of claims and potential claims., • Learn to determine whether additional evidence may be needed to support a particular claim; provide advice to veteran concerning same., • Learn to determine the risks and benefits of filing a particular claim., • Learn to assess whether the evidentiary support available for a given claim meets the requirements of 38 CFR § 14.633, which incorporates the rule on “frivolous claims” as adopted by the American Bar Association in Model Rule 3.1., • Practice preparing all submissions required to initiate and advance the claim, including, without limitation, briefs and similar documents analyzing the application of appropriate regulations to the facts of a given case., • Practice monitoring the progress of a claim from submission to resolution, dealing with VA adjudicators as required to advance the claim and keeping the claimant advised of significant developments., • Learn to advise the claimant, where appropriate, of administrative and judicial appeal options for claims denied in whole or part and, when requested, provide the claimant with specific advice concerning likely bases of appeal (if any)., • Practice representing claimants before military and VA hearing panels and boards, presenting evidence and legal argument and, as necessary, examining and cross-examining witnesses., • Learn to develop specific goals and plans to prioritize, organize, and accomplish clientele workload., • Communicate professionally and diplomatically with people inside/outside the organization., • Learn to recruit new DAV members to further support and enhance DAV’s mission of service., • High school diploma (or equivalent)., • Must be found eligible and entitled to receive services through VA’s Vocational Rehabilitation and Employment Service under the established National Memorandum of Agreement containing DAV’s On-The-Job Training Program for National Service Officers except in situations where hiring a non-eligible candidate serves an important DAV business purpose., • Must be a member in good standing of the DAV., • Excellent communication skills., • General knowledge of legal and/or medical terminology preferred., • General understanding of business/administrative procedures and systems such as managing clientele files and records, cash ledgers, and quality customer service is helpful., • A valid motor vehicle driver’s license (other than motorcycle) is preferred., • Physical Demands: Job requires sitting up to eight hours a day and standing up to two to four hours a day. Body movement primarily in hand and arm functions associated with normal office activities. Hand and eye coordination, and hand dexterity is required for handwriting and keyboarding over prolonged periods of time. Requires occasional lifting and/or carrying of no more than 25 pounds, and bending, squatting, pushing and pulling., • Work Environment: The noise level in the work environment is usually minimal., • Position may require minimal travel for training (advance authorization from National Service Director required)., • NSOs must be willing to relocate (nationwide) based on the needs of the DAV and provide written affirmation likewise.

Job DescriptionSalary: 17 Synergy Companies help to provide no-cost energy-saving programs to applicants of the local public utilities. We are a subcontractor for Southern California's local natural gas, electric, and water utility companies. We have teamed up with these utilities to provide their customers with measures/items that we install to reduce the home's electricity, water, and natural gas usage.Synergy Companies has over 40 years of experience working with these utility companies. If you're looking to join a team that has a great work environment, competitive pay, and health benefits and is constantly evolving to accommodate new and improved technological advances to residential homes and businesses, Synergy Companies is the future for you. We are seeking a highly driven and motivated applicant to join our team. Candidates with experience working with their hands as an HVAC technician, installer, and any other related work field will be heavily considered. Experience may be substituted with experience in a technical school.As an apprentice technician, your responsibilities will include but are not limited to, arriving on time to scheduled appointments, performing all necessary installations required for all specific programs (IE: smart thermostat, duct test and seal, low flow shower heads, faucet aerators), and greeting each customer with a positive and friendly attitude. Our apprentice technicians are one of our vital positions in ensuring customer satisfaction and being an educator in supporting energy savings. Duties/Expectations: • Willing to learn while working with hands and tools, • Install all available measures for customers while at their home, • Ensure that all measures are properly working before departing from the customer's home, • Be willing to attend service calls as directed by our service call department, • Attend company meetings as required, • Be responsible for company equipment and vehicle, • Provide top-quality customer service, • Be comfortable with selling additional upgrades to the customer, • Educate customers on energy savings measures, • Being on time for scheduled appointments and meetings Skills/Qualifications: • High school diploma or GED, • Pass Drug and background screening, • Valid Drivers License, • Prior experience working as an installer or attending a technical college preferred, • Ability to work with your hands, • Knowledgable with basic tools and power tools, • Bilingual a plus Some Benefits Include: • Full Time/40 hours a week (Typically hours are 7am-3:30pm or 8am-4:30pm), • Tools provided, • Health benefits available - Employee's insurance is covered with the option of family coverage to be added at the employee's expense, • Paid vacation after 1 year of employment, • Company 401k matching plan available after 1 year of employment, • Paid ongoing training, incentives, and career development

Job DescriptionCompany Description At Land Rover Pasadena, a Sonic Automotive family dealership, you'll find the opportunities, resources, and support you need to grow and develop professionally. Our 100+ dealerships are concerned with more than moving inventory; they're committed to your success and invested in your future. So read on, and consider a rewarding career with Sonic Automotive, Inc. Salary: $35 - $70 / hour Based on Land Rover Certifications and / or General Experience / Skill Level Apprenticeships Available Job Description Position: Automotive Technician Reports to: Service Manager/Director The Service Technician is responsible for performing vehicle repair and maintenance work as assigned in accordance with dealer and factory standards. S/he also will oversee the work of any apprentice technician assigned to him/her. Duties and Responsibilities: · Receive repair orders from dispatcher and take to stall area. · Perform work as outlined on repair order with efficiency and accuracy, in accordance with dealership and factory standards. · Diagnose cause of any malfunction and perform repair. · Communicate with parts department to obtain needed parts. · Save and tag parts if the job is under warranty or if requested by the customer. · Examine the vehicle to determine if additional safety or service work is required. · Notify service advisor immediately if additional work outlined is not needed or required. · Notify service advisor immediately if repairs cannot be completed within the time promised. · Document work performed. · Road-test vehicles when required or refer to the test technician, keeping in mind that the customer vehicle should not be used for personal errands. · Supervise work of any apprentice technicians as assigned. · Attend factory-sponsored training classes. · Keep abreast of factory technical bulletins. · Ensure that customers’ cars are kept clean. · Keep shop area neat, clean, and be able to account for all dealership-owned tools at all times. · Understand and follow federal, state and local regulations, such as those governing the disposal of hazardous wastes. · Must follow all company safety policies and procedures, and immediately report any and all accidents to a manager or supervisor. Qualifications • 1+ years of reconditioning or dealership service experience, • Familiarity with multi-point inspections and light mechanical repairs, • Experience working with internal service departments or used vehicle operations, • High CSI is a must., • ASE or manufacturing training., • High school diploma or the equivalent., • Valid driver’s license and a good driving record., • Manual dexterity., • Good Judgment., • All applicants must be authorized to work in the USA., • All applicants must perform duties and responsibilities in a safe manner., • Resilience, agile, and open to change, • Great professional attitude and strong work ethic, • Ability to follow directions and processes, • Willingness to keep learning, • Active-listening and strong communication skills, • Respect for teammates, • Excellent customer service mindset, • Positive outlook Additional Information It's time to make the most important move of your career. From our cooperative, team-based approach, to our more than 1,000 internal advancements each year, it's easy to see the difference. When you join our organization, you'll enjoy comprehensive training, competitive compensation, and unparalleled benefits. Simply put, you'll experience the best that a career in the automotive industry has to offer. All your information will be kept confidential according to EEO guidelines. (The Technician Position has a Pay Scale consisting of the following elements and ranges. Wages include Base Hourly Compensation of between $35.00 and $70.00.)

Job DescriptionCompany Description BMW Monrovia is a Sonic Automotive Dealership. Sonic Automotive is a Fortune 500 company that is transforming the way people shop for, buy and service their vehicles. Our talented team work together to ensure we provide an experience unmatched by our competitors. Our associates are happy to work here because: • We boast the lowest turnover in the industry., • We provide award winning training (Training Magazine Top 125, and Brandon Hall Awards)., • We are committed to developing and promoting within the company., • We are technology based - most jobs use IPads or IPhones that we provide., • Our benefits are extremely competitive with Medical, dental, vision, HSA, 401k and PTO., • We encourage peer to peer teamwork and recognition., • Special benefits to purchasing and leasing a car. If you want to find out more about the types of jobs we have here, we've highlighted a few. We're proud of what we're doing here. Come and join us! Job Description The Service Technician is responsible for performing vehicle repair and maintenance work as assigned in accordance with dealer and factory standards. S/he also will oversee the work of any apprentice technician assigned to him/her. Duties and Responsibilities: · Receive repair orders from dispatcher and take to stall area. · Perform work as outlined on repair order with efficiency and accuracy, in accordance with dealership and factory standards. · Diagnose cause of any malfunction and perform repair. · Communicate with parts department to obtain needed parts. · Save and tag parts if the job is under warranty or if requested by the customer. · Examine the vehicle to determine if additional safety or service work is required. · Notify service advisor immediately if additional work outlined is not needed or required. · Notify service advisor immediately if repairs cannot be completed within the time promised. · Document work performed. · Road-test vehicles when required or refer to the test technician, keeping in mind that the customer vehicle should not be used for personal errands. · Supervise work of any apprentice technicians as assigned. · Attend factory-sponsored training classes. · Keep abreast of factory technical bulletins. · Ensure that customers’ cars are kept clean. · Keep shop area neat, clean, and be able to account for all dealership-owned tools at all times. · Understand and follow federal, state and local regulations, such as those governing the disposal of hazardous wastes. · Must follow all company safety policies and procedures, and immediately report any and all accidents to a manager or supervisor. Qualifications High CSI is a must. · ASE or manufacturing training. · High school diploma or the equivalent. · Valid driver’s license and a good driving record. · Manual dexterity. · Good Judgment. · All applicants must be authorized to work in the USA. · All applicants must perform duties and responsibilities in a safe manner. · All applicants must be able to demonstrate ability to pass pre-employment testing to include background checks, MVR, drug test, and valid driver license. Additional Information It's time to make the most important move of your career. From our cooperative, team-based approach, to our more than 1,000 internal advancements each year, it's easy to see the difference. When you join our organization, you'll enjoy comprehensive training, competitive compensation, and unparalleled benefits. Simply put, you'll experience the best that a career in the automotive industry has to offer. All your information will be kept confidential according to EEO guidelines.

Job DescriptionCompany Description At BMW of Monrovia, a Sonic Automotive family dealership, you'll find the opportunities, resources, and support you need to grow and develop professionally. Our 100+ dealerships are concerned with more than moving inventory; they're committed to your success and invested in your future. So read on, and consider a rewarding career with Sonic Automotive, Inc. Salary: $19.00 - $52.00/ flat rate hour based on experience and certifications **Ask about our Tenure Bonus program that begins at 6 months from hire date. Bonus pay up to $3.50 per flat rate hour!!! Our associates are happy to work here because: • We boast the lowest turnover in the industry., • We provide award winning training (Training Magazine Top 125, and Brandon Hall Awards)., • We are committed to developing and promoting within the company., • Our benefits are extremely competitive with Medical, dental, vision, HSA, 401k and PTO., • We encourage peer to peer teamwork and recognition., • Special benefits to purchasing and leasing a car. We're proud of what we're doing here. Come and join us! Job Description The Automotive Service Technician is responsible for performing vehicle repair and maintenance work as assigned in accordance with dealer and factory standards. S/he also will oversee the work of any apprentice technician assigned to him/her. Duties and Responsibilities: · Receive repair orders from dispatcher and take to stall area. · Perform work as outlined on repair order with efficiency and accuracy, in accordance with dealership and factory standards. · Diagnose cause of any malfunction and perform repair. · Communicate with parts department to obtain needed parts. · Save and tag parts if the job is under warranty or if requested by the customer. · Examine the vehicle to determine if additional safety or service work is required. · Notify service advisor immediately if additional work outlined is not needed or required. · Notify service advisor immediately if repairs cannot be completed within the time promised. · Document work performed. · Road-test vehicles when required or refer to the test technician, keeping in mind that the customer vehicle should not be used for personal errands. · Supervise work of any apprentice technicians as assigned. · Attend factory-sponsored training classes. · Keep abreast of factory technical bulletins. · Ensure that customers’ cars are kept clean. · Keep shop area neat, clean, and be able to account for all dealership-owned tools at all times. · Understand and follow federal, state and local regulations, such as those governing the disposal of hazardous wastes. · Must follow all company safety policies and procedures, and immediately report any and all accidents to a manager or supervisor. Qualifications · High CSI is a must. · ASE or manufacturing training. · High school diploma or the equivalent. · Valid driver’s license and a good driving record. · Manual dexterity. · Good Judgment. · All applicants must be authorized to work in the USA. · All applicants must perform duties and responsibilities in a safe manner. · All applicants must be able to demonstrate ability to pass pre-employment testing to include background checks, MVR, drug test, and valid driver license. Additional Information It's time to make the most important move of your career. From our cooperative, team-based approach, to our more than 1,000 internal advancements each year, it's easy to see the difference. When you join our organization, you'll enjoy comprehensive training, competitive compensation, and unparalleled benefits. Simply put, you'll experience the best that a career in the automotive industry has to offer. All your information will be kept confidential according to EEOC guidelines (The Technician Position has a Pay Scale consisting of the following elements and ranges. Wages include Base Hourly Compensation of between $19.00 and $52.00.)

Job Description At Senra Systems, we believe that the future of manufacturing lies not in automation, but in configuration. We supercharge electrical wire harness manufacturing through software configuration, transforming skilled assembly tasks into high-throughput production lines. We enable customers to design what they want, when they want it and deliver harness builds at record-breaking speed. The Apprentice Quality Inspector role will be responsible for performing in-process and final inspections of harnesses and hardware to ensure compliance with internal, external, and industry specifications. This role plays a key part in supporting production goals, driving continuous improvement, and ensuring the on-time delivery of high-quality products. The ideal candidate will have strong attention to detail, a quality-first mindset, and the ability to work collaboratively across functional teams. What you'll own: • Perform in-process and final inspections of hardware against engineering drawings, industry specifications, and internal/external quality requirements., • Conduct incoming inspections as required to support production timelines., • Create and maintain inspection documentation, including First Article Inspection Reports (FAIRs), Inspection Reports, Certificates of Conformance (CoC), and End Item Data Packages (EIDPs)., • Ensure the delivery of high-quality products from Senra's manufacturing team, supporting production, operations, and delivery targets., • Drive Non-Conformance Reports (NCRs) to closure, supporting disposition, approvals, and verification activities as required., • Investigate, document, and resolve product and process issues, ensuring proper corrective actions are implemented and verified., • Identify and recommend process improvements that enhance product quality, reduce inefficiencies, and support lean manufacturing initiatives., • Perform product testing on hardware as required to verify performance and quality., • High school diploma or equivalent (Associate's or Technical Degree in a related field preferred)., • 6 months of experience in Electronics Quality inspection or manufacturing roles, • Hands on experience inspection of harnesses to IPC-620 or NASA 8739.4 Class 3, • Ability to read and interpret engineering drawings, blueprints, and industry specifications., • Strong documentation skills, • Strong problem-solving, organizational, and multitasking skills,, • 1+ years of experience in quality inspection, • Hands on experience inspecting aerospace or defense hardware, • IPC-620, IPC-610 and NASA-STD-8739.4 certified, • Previous experience working at a fast-paced, high-growth startup, • Familiarity with inspection techniques, root cause analysis (RCA), and corrective action processes (CAPA)., • Compensation will be based on experience, qualifications, and other job-related factors., • Hourly Range: $19.00-$26.50, • Unmatched opportunities to drive impact on a friendly and mission-driven team, • Own a piece of the pie with equity participation!, • Comprehensive medical, dental, vision, life and long-term disability coverage, • Flexible Spending Account (FSA) and Dependent Spending Account (DSA) for health-related expenses, • 20 vacation days per year and 12 company holidays for rest and relaxation, • 401(k) plan to set yourself up for retirement, • Choose a record you love, and we'll add it to our growing vinyl collection!, • $50/month DoorDash credit – lunch is on us!, • Up to $100/month reimbursement for gym memberships, • Fully stocked kitchen with snacks and beverages, • Regular team-building events, lunches, and the occasional breakfast burrito!, • Bright, open office with communal spaces for collaboration and free parking ITAR REQUIREMENTS: • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Pay range$19—$26.50 USD

Job Description We are looking for individuals that are looking to enter the financial lucrative world of insurance! Our producer program allows you to work and be mentored by one of our districts most successful agents. We will provide full one on one training with sales, customer service, insurance knowledge and marketing techniques. Base Pay + Commission! Responsibilities: • Provide quotes, pricing, and other information to prospective and existing clients., • Ensure all quotes procedures and practices are compliant with Farmers guidelines and procedures., • Meet new business sales goals by working existing leads, develop new leads and market appropriate products. Requirements: • Able to obtain or currently hold a Property & Casualty license and a Life & Health License. (We will provide study material for candidates that do not currently hold insurance license), • Outgoing, confident, and assertive individual., • Quick Learner and team player., • Committed to growth., • Must pass credit and background check. Previous Sales, Marketing or networking experience is a plus! Property and Casualty insurance license is a plus!

Job Description At Senra Systems, we believe that the future of manufacturing lies not in automation, but in configuration. We supercharge electrical wire harness manufacturing through software configuration, transforming skilled assembly tasks into high-throughput production lines. We enable customers to design what they want, when they want it and deliver harness builds at record-breaking speed. Role Overview: We're seeking a Head of Production to stand up and lead our flagship 100,000 ft² wire harness manufacturing factory in Orange County. This is a cornerstone role — the leader who will establish, scale, and operate our largest and most advanced factory as we grow from ~70 technicians today to over 200 by the end of 2026. You'll own all aspects of production operations — production, training, machine maintenance, facilities & EHS, and production control, with a mandate to build a high-accountability, high-performing organization that delivers both precision and scale. The ideal candidate is a seasoned manufacturing leader who thrives in fast-paced hybrid high-mix, high-volume environments and has a track record of building high-performing, scalable teams, processes, and systems from the ground up. What you'll own: • Factory Bring-Up, • Own the stand-up and commissioning of Senra's new Orange County factory — drive contractor execution, layout build-out, and an aggressive schedule to get the site fully operational by Q2., • Lead the personnel transition plan, coordinating the phased move of technicians and leadership from Factory 1 to Factory 2 to ensure business continuity., • Partner with Engineering on layout and workflow design to optimize flow, throughput, and space utilization., • Build the operational foundation to support both high-mix, low-volume and high-volume production for aerospace and defense customers., • Establish a replicable playbook that makes this site the model for future factory expansion., • Operations Leadership, • Set production goals, staffing plans, and throughput targets to meet on-time delivery, quality, and revenue objectives. Drive improvements through disciplined planning and continuous improvement., • Implement and sustain daily management systems, KPIs, and standard work across all departments., • People & Culture, • Build, develop, and lead a team of 200+ technicians and leaders, the majority of whom are early-stage career technicians advancing through structured training programs., • Partner with the People team to implement robust, quantifiable apprentice training and qualification systems to ensure consistent skill growth and product quality., • Foster a culture of accountability, integrity, and high performance — where expectations are clear, ownership is felt, and success is shared., • Develop and mentor emerging leaders to ensure depth of leadership bench as the site scales., • Systems & Process Development, • Partner with Software and Manufacturing Engineering to implement and enhance enterprise systems to meet production needs., • Build and standardize core processes — production control, materials flow, maintenance, training — that can scale and replicate across future factories., • 12+ years of progressive leadership experience in manufacturing operations, ideally in aerospace, defense, or other high-reliability, high-mix industries., • 8+ years of experience as a manufacturing, industrial, or operations engineer., • Proven success standing up or scaling a large factory from early-stage to steady-state operations., • Deep understanding of operations and production planning, quality systems, material flow, and team development., • Demonstrated ability to design and execute training, certification, and progression programs tied to measurable outcomes., • Strong business acumen — able to balance output, cost, and quality while building for long-term scalability., • Excellent leadership presence: decisive, transparent, and grounded in integrity., • Bachelor's degree in Engineering, Operations Management, or related field., • Compensation will be based on experience, qualifications, and other job-related factors., • Salary Range: $180,000-$250,000, • Unmatched opportunities to drive impact on a friendly and mission-driven team, • Own a piece of the pie with equity participation!, • Comprehensive medical, dental, vision, life and long-term disability coverage, • Flexible Spending Account (FSA) and Dependent Spending Account (DSA) for health-related expenses, • 20 vacation days per year and 12 company holidays for rest and relaxation, • a 401(k) plan to set yourself up for retirement, • Choose a record you love, and we'll add it to our growing vinyl collection!, • $50/month DoorDash credit – lunch is on us!, • Up to $100/month reimbursement for gym memberships, • Fully stocked kitchen with snacks and beverages, • Regular team-building events, lunches, and the occasional breakfast burrito!, • Bright, open office with communal spaces for collaboration and free parking ITAR REQUIREMENTS: • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Pay range$180,000—$250,000 USD

Job Description Tired of working a job instead of building a career? Looking for freedom, income potential, and personal growth? Want to be your own boss — with proven training and a supportive team behind you? If that sounds like you, keep reading. Keller Williams is one of the most respected names in real estate, and we’re growing fast! We’re looking for driven individuals to join our team — whether you’re a licensed agent ready to take your career to the next level, or someone who’s ready to earn their license and start strong. Licensed agents: We’ll show you how to plug into proven systems to generate leads, close deals, and scale your income. Aspiring agents: We’ll help you get licensed and coach you every step of the way so you can hit the ground running. Why Join Keller Williams? • Top-tier coaching & mentorship — learn from agents closing 6, 7, and even 8 figures, • Cutting-edge technology & marketing tools — make your job easier and more effective, • Proven lead generation systems — no more guessing where your next deal is coming from, • Collaborative team culture — you’re in business for yourself, not by yourself, • Flexible schedule — build your business around your life, • Upside income potential — the harder you work, the more you can earn We’ve had agents make more in their first few months here than they made in entire years at previous jobs. If you’re coachable, motivated, and ready to learn, we can help you do the same. Who We’re Looking For: • Licensed real estate agents who want to grow, • Aspiring agents ready to start a career and get licensed (we’ll help!), • People who are coachable, driven, and business-minded, • Great communicators and relationship-builders, • Must currently live in or be moving to the area within 60 days Ready to Apply? If you’re ready to build a career in real estate, not just have another job, apply today. We’ll reach out to qualified candidates to schedule an introduction and answer your questions. Click “Apply Now” and let’s get started. Compensation: $97,500 - $192,000 yearly Responsibilities: • Assist in the development and execution of marketing strategies to attract potential clients and listings., • Engage in continuous learning and training sessions to enhance your real estate knowledge and skills., • Collaborate with experienced agents to gain insights and practical experience in closing deals., • Participate in networking events and community activities to build and maintain client relationships., • Utilize cutting-edge technology and tools provided by Keller Williams to streamline your daily tasks., • Support the team in managing client inquiries and ensuring a seamless client experience., • Contribute to team meetings by sharing insights and strategies to improve business outcomes.Qualifications:, • Real Estate License or in the process of getting one., • Experience in developing and executing marketing strategies to attract potential clients and listings., • Ability to engage in continuous learning and training to enhance real estate knowledge and skills., • Proven track record of collaborating with experienced agents to gain insights and practical experience in closing deals., • Ability to participate in networking events and community activities to build and maintain client relationships., • Experience in utilizing cutting-edge technology and tools to streamline daily tasks., • Ability to support the team in managing client inquiries and ensuring a seamless client experience., • Proven ability to contribute to team meetings by sharing insights and strategies to improve business outcomes.About Company At Keller Williams, our mission is clear: to fuel the success of real estate agents by delivering unparalleled resources, expert mentorship, and cutting-edge technology. We are dedicated to empowering agents to excel in a competitive market, providing the tools and support needed to drive growth, achieve goals, and thrive every step of the way.

Job Description Location: SoCal Region G3 Quality is looking for experienced Field Construction Materials Testing Technicians for projects throughout the Southern California region. We are seeking candidates who demonstrate a strong work ethic with a professional attitude. The ideal candidate will have asphalt coring, concrete testing, and nuclear gauge usage experience for a civil engineering or materials testing company. Responsibilities • Timely documentation of all testing activities and observations., • Daily coordination with Client and Contractor representatives., • Strict adherence to required test methods., • Local 12 Field Inspector: $64.18 - $67.96 an hour, • Local 12 Apprentice: $39.58 - $59.36 an hour, • Prevailing wage rates apply.Benefits, • Health & welfare and retirement/pension plans are offered through the union., • Union benefit links: OE12 Benefits, • Must be part of the Operating Engineers Local 12 union, or willing to join the union., • Physically able to regularly lift and /or move up to 75 lbs., • Valid drivers’ license., • Ability to read plans and specifications., • Nuclear gauge user HAZMAT certification., • Current Caltrans certification in various test methods relating to soil, concrete, and hot mix asphalt testing. G3 Quality, Inc. is an equal opportunity employer. All qualified applicants for employment will be considered without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. About the Company G3 Quality is a team of engineers and professional experts who’ve helped countless clients deliver successful infrastructure projects for the past decade. Through a mix of world-class Quality Management, Pavement Engineering, Inspection, and Materials Testing services, we are your partner every step of the way. Since 2013, we have built a strong reputation among contractors, design firms, construction managers, and local state and government agencies across the West Coast. Led by industry veterans Chris Gerber and Susan Pierce, our team has grown into a force of over 125 professionals since its inception, with a corporate office in Cerritos, California, and additional laboratories and offices in Bakersfield, Redlands, and Sacramento. Thank you for your interest in employment opportunities at G3. Powered by JazzHR QjRZOdFa2q

Job DescriptionSalary: Commissions Leads Will Be Provided Rosano Capital Partners is looking for experienced and inexperienced Commercial Real Estate agents to join our growing team. The vertically-integrated company offers industry-leading tools and a training program for new agents as well as full-time graphic and web designers, analytical support, and a competitive commission split structure. Rosano Capital Partners leads the way in investment sales, financing, mgmt and advisory services. From training to technology, we invest heavily in our people and processes to ensure optimum results. From our agents and investors, to our investments, were proud of the diversity that reflects the dynamic markets we conduct business in. We are a middle market leader with over $1.5 billion in transactionsand were just getting started join the team! Minimum qualifications: * College degree * Must be local to Los Angeles with the ability to commute and work in office * Strong analytical skills with attention to detail * Self-motivated individuals with a can-do attitude and ability to handle multiple tasks in a fast-paced environment * Excellent verbal and written communication skills, phone etiquette, and learning aptitude • Willing to cold Call and create your business

Job DescriptionAs a valued member of our team, the Diesel Technician Apprentice I is required to perform routine and BIT safety inspections, oil changes, preventive maintenance services, possess minimum number of tools and capable of low skill level repairs. Pay Range$18.00-$26.00 Benefits· Paid Holidays· Paid Vacation· Medical, Dental, Vision· 401k Retirement · $100 credit for boots after 90 days · Uniforms provided · Tool allowance when applicable · Monthly credit for cellphone use Essential Functions: • Basis tools needed to effectively do inspections and mechanical repairs to equipment and routine preventive services., • Complete all maintenance duties as assigned, and repair all equipment on property including, but not limited to, diesel, plant or yard equipment., • Efficient communication and computer skills for proper file documentation on each job performed., • Ensure vehicles meet CHP/BIT/PM inspection requirements., • Maintain a high standard of safety, cleanliness, and efficiency in all maintenance., • Maintain appropriate record keeping, Bit inspections, DVIRs, work done description and work orders., • Track and schedule with operations or manager on vehicles status and updates., • Will install, select or identify proper tire replacements & legal limit knowledge., • Will inspect and identify vehicle conditions on different types of equipment such as tractors, trailers or mixers. This is a full-time position. General days and hours of work are Monday through Friday, hours to be determined. Not eligible for remote work. Occasional evening and weekend work may be required as job duties demand. Travel Required: Estimated less than 25% Minimum Education and Experience • High school diploma., • 1+ years truck-trailer repair experience preferred., • 1+ years basic diesel mechanical experience required., • 2+ years working on electrical, mechanical, and hydraulic systems., • Class C Driver's License., • Experience climbing ladders to 12 feet heights.Preferred Education and Experience, • Must have own tools. Associated Ready Mixed Concrete es una compañía EEO/AA (igualdad de oportunidades/acción afirmativa) y no discrimina por motivos de raza, color, religión, credo religioso, sexo, orientación sexual, identidad o expresión de género, origen nacional, ascendencia, edad, condición física odiscapacidad mental, condición médica, información genética, estado civil o familiar, estado militar o de veterano, o cualquier otra característica protegida por la ley federal, estatal o local en los programas o actividades que opera. #zr

Job Description Great Opportunity to Join a Stable Family Owned Company with a great work/life balance. Now Hiring an Auto Mechanic! If you are interested in a good job and good benefits, a GREAT environment, Team Work and a lot more, Then you may owe it to yourself to check us out!!! Only a one spot open!!! Must be an Energetic Team Player With Professionalism, Passionate About Helping People *** PTO, Medical, Vision and Dental Care Benefits If you're a Mechanic or a Mechanic's Apprentice looking for growth with a company that will help you perfect your craft and continue to invest in you, this is the opportunity for you. We are proud to offer a family-style work environment and above market pay, in addition to competitive benefits packages. This position is ideal for someone who is eager to immediately start working towards a Career. Benefits: • Paid Time Off, • Must work well individually and as part of a team., • Follow the outline of the company policies and procedures., • Communicate professionally and respectfully with customers, office staff and coworkers., • Some experience servicing, repairing and basic oil changes, and other tasks as assigned. Background and Drug Screening will be done before an offer is made.

Job Description Late Shift Machinist - Full Time - Santa Fe Springs, CA At Sulzer, you are empowered to deliver superior results. As a pioneer in industry we have a proud heritage of innovation and continue to evolve for the future. Join our story and create your own impact by developing your expertise and building solutions that help make our lives safer, smarter and more sustainable. Join our Pump Services team within Rotating Equipment Services division in Santa Fe Springs, CA as a Late Shift Machinist and help us take our Service Center to the next level. In this role you will be accountable for: • Performing layouts, setting up and operating conventional machine tools as required, • Reading and interpreting all drawings, including geometric dimensioning and tolerancing, • Designing setup methods where none exist, • Instructing other shop personnel on proper machining techniques, • Continually improving methods to deliver higher quality with improved costs To succeed in this role, you will need: • Completion of a machinist apprentice program or equivalent training, • Ability to hold close tolerances and conduct component inspections, • Ability to setup machine tools: ID / OD Grinders, Turret Lathe, Engine Lathe, Horizontal Boring Mill, Vertical Boring Mill, Radial Drill, Planer Mill, • Four years of experience in machine shop operations, • Willingness to work in a team environment, • Openness to working overtime as required If you’re a qualified candidate with proven expertise in developing core competencies, leading teams and driving continuous improvement, take the next step and apply with Sulzer. Make the most of your career! Your benefits: • 15 days of paid time off and 11 company-paid holidays, • 401k plan with a 6% match, • Comprehensive health plan including medical, dental, vision, Life, short-term & long-term disability, • Motivating wellness program, • Employee Assistance Program Location: We are based in Santa Fe Springs, CA. We are looking forward to hearing from you! Sulzer is an equal opportunity employer, committed to the strength of a diverse workforce. 82% of our employees recommend Sulzer as a good place to work – so come and join our story, starting today!

Job Description Position Overview: The Labor Compliance Analyst monitors, reviews, and enforces the Companies Labor Compliance Program (LCP) in accordance with the companies and DIR accepted practices. Additionally, the analyst performs field interviews and coordinates with contractors/subcontractors on all projects to ensure compliance with California Labor Code, California Code of Regulations, Companies Labor Compliance Program, Federal Davis-Bacon Act (when applicable), and all other applicable regulatory requirements. Position Description: • Work with appropriate employee staff identifying applicability of state/federal prevailing wage requirements as well as providing state and federal prevailing wage rates for inclusion in contract solicitation documents., • Prepare and present labor compliance requirements at pre-bid and/or pre-construction meetings for contracts subject to the payment of prevailing wages., • Respond to prevailing wage questions/concerns/matters that may arise from contractors and construction workers., • Facilitate the proper reporting of prevailing wages, fringe benefits, apprentice utilization, and resolution of employee wage violations., • Collect and review weekly Certified Payroll Records (CPRs) and supporting payroll records (statements of compliance, fringe benefit statements, payroll deductions, apprentice registration, etc.) submitted by prime and subcontractors., • Communicate with contractors to resolve discrepancies/inadequacies related to CPRs submittals., • Conduct investigations on alleged contractor violations uncovered from CPRs reviews, site visits, worker complaints, etc., • Review contractor documents when applicable; determine the withhold amounts for unresolved issues., • Notify affected contractor of audit, conduct pre meeting with contractor., • Prepare the Withholding of Contract Payments; participate in settlement meetings/hearings., • Maintain complete and updated electronic and/or hardcopy contract files, as appropriate, containing all relevant labor compliance information., • Respond to requests regarding payroll related/labor compliance documents., • Track changes and updates to state and federal labor compliance and prevailing wage regulations and standards; with the assistance of the Labor Compliance Lead (LC Lead) LCO apply changes/updates to the labor compliance procedures and practices accordingly., • Assist the LC Lead with the development of labor compliance policies, procedures, form templates, and instructional operations manuals., • Position requires candidates to travel to project sites throughout the district, conduct site visits and job walks, perform labor standards interviews with a random sampling of tradesman onsite, investigate complaints and issues, and report activities monthly., • Conduct observations and worker interviews and assist the Labor Compliance Department (LCD) with site investigations., • Attend meetings at the project site as needed, including pre-bid meetings, pre-construction meetings and progress meetings., • Maintain files of working documents, including project interview and resolution paperwork., • Perform other duties as assigned., • The current District policy is four days in the office with one remote day per week. Work schedule, including remote day selection, is subject to department supervisor approval. The current policy is subject to change at any time. Minimum Required Qualifications: • Minimum two (2) years of experience in public works construction., • Bachelor of Arts/Science Degree or related degree from a recognized college or university. Additional qualifying experience in excess to the minimum stated above may be substituted for the required education on a year-for-year basis., • Must have a clear understanding of construction practices, state and federal labor laws, and the ability to interpret and apply the applicable labor law regulations in accordance with the DIR and the Company Program's standards, • Ability to work in a fast-paced environment, • Must have a high level of interpersonal skills to handle sensitive and confidential situations and documents., • Strong written and verbal communication skills., • Possess valid California driver's license and able to travel., • Experience in Labor Compliance and LCPtracker., • Bi-lingual-Spanish. Job Posted by ApplicantPro

Job DescriptionAluminum Welder I, II, and III (Direct Placement for Client in Vancouver, WA) SIGMADESIGN has collaborated with a Pacific North West industrial company seeking experienced Aluminum Welders to join their facility in Vancouver, Washington. This company works on projects for the Aerospace, Defense, Energy and Infrastructure Industries. What is offered • Multiple options for medical, dental and vision including some with HSA and FSA options, life and disability insurance, EAP, 401K, • PTO and 10 paid holidays, • Salary – Welder I: $34.13, Welder II: $30.14, Welder III: $25.56, • Shift: Monday - Thursday, 10 hour shift, 1st shift. Friday - Sunday, 12 hours, first shift Essential Job Functions - Responsibilities: • Utilize knowledge of weld electrodes and wire, machine settings, maintain an acceptable standard in quality and quantity, and use oxygen/acetylene gas torch for cutting or pre-heat., • Read and interpret drawings, sketches and weld symbols, set up and operate semi-automatic or automatic weld equipment., • Assemble and tack parts as directed by supervisor, • Welder I: Minimum five to seven years’ welding/fabrication experience or apprentice program, • Welder II: Minimum of two years’ welding/fabrication experience or apprentice program., • Welder III: Minimum of one year welding/fabrication experience or apprentice program., • Capable of passing a 3G, 4G Aluminum weld test on 3/8 plate to AWS D1.2 weld standards., • Able to consistently pass UT/RT/PT weld joints, • Ability to lift, carry 60lbs., or maneuver objects, difficult objects will be lifted with the assistance of mechanical means or additional workers., • Must be able to lift 4 ft., 60 lb. spool of wire and load welding machine., • Ability to sit, stand, bend, reach, kneel, twist, pull, push, grip, and climb. SigmaDesign is an Equal Opportunity Employer Powered by JazzHR 5wm838DBBW

Job DescriptionJoin our passionate team as a Pilates Instructor and bring energy, expertise, and encouragement to every class! You’ll guide our amazing Club Pilates members through safe, challenging reformer-based workouts that build strength, balance, and confidence — creating a motivating, community-driven experience every time they step into the studio. Club Pilates Brea is a thriving, well-established studio known for its outstanding community reputation and supportive, hands-on management team. Functions:• Manage Pilates Instructors by performing regular evaluations. • Manage class schedule with the General Manager., • Recruit new Pilates Instructors., • Train new Pilates Instructors on Club Pilates Brea's standards and procedures., • Manage and coordinate substitutes., • Provide Pilates group reformer classes pursuant to Club Pilates standards.• Instruct clients (up to 12 clients per class) using proper form and safe methods on a variety of equipment including, but not limited to, hand weights, Exo-Chair, Reformer, Springboard, etc. o ensure a safe yet creative experience., • May be required to conduct private, semi private, or other additional sessions as needed., • Visually inspect the equipment prior to the beginning of class to ensure equipment is in good working order and safe to use.• Lead Instructor will be responsible for maintenance of the studio, including cleaning floor after each shift and making sure the studio is well-stocked with items needed for the operations of a class.• Participate in networking/community events as needed to help generate new business• Stay up to date with, and implement, Club Pilates education standards at all times• Aid front desk staff with checking clients in.• Lead Instructor will be required to arrive at a set time prior to the beginning of each scheduled class., • Other duties as assigned Requirements: • 450+ hour Comprehensive Pilates Certification, • Strong leadership skills and ability to mentor Pilates Instructors and Apprentice Instructors, • Comfortable learning and adding TRX, Functional Standing Movement(Barre), and TriggerPoint modalities to repertoire, • Demonstrate anatomical knowledge and attention to safety, • Must be able to demonstrate proper and effective group reformer instruction, • Experience teaching 6 or more participants in an apparatus based group class, • Passion for learning and willingness to complete continued education trainings or workshops, • Must communicate professionally and effectively to clients and colleagues, • Pleasant demeanor and excellent customer service skills, • Must have excellent public speaking skills, • Must have proficient computer skills, • Punctual and reliable Physical Requirements and work environment: The physical demands and work environment characteristics are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Must be able to stoop, kneel, bend, reach, stand, walk, push, pull, lift, work with fingers, grasp, feel, talk, hear, and perform repetitive motions, • Must be able to lift 20 lbs. and be able to move/push equipment as needed, • Visual acuity required, • Must be able to stand for long periods of time Work Environment: vnc96eAomA

Job Description GENERAL OPERATIONS • Maintain, operate and inspect building systems including fire alarms, HVAC, plumbing, and electrical in keeping with industry practice, manufacturer recommendations and Engineering Standard Operating Procedures. Hands on application +50% of time., • Develop and maintain an up-to-date inventory of all equipment, tools, and supplies applicable to the maintenance of the property., • Obtain bids or proposals for equipment maintenance contracts, repair work, and capital projects. Review submittals with Property Manager, and other personnel as necessary. Make recommendations for scope of work and contractor selection., • Assist Property Manager in the preparation of annual budget, particularly in the areas of building systems, repair and maintenance, service contracts, utilities, and capital projects., • When applicable, assist in preparation of monthly variance reports., • Special projects as directed by Property Manager., • Research and make recommendations to Property Manager for more cost-effective and efficient methods of operating and maintaining building systems, • No direct supervisory responsibilities. Indirect reports include Apprentice Engineer, Utility Engineer and Day Porter., • Evaluate and make recommendations to Property Manager regarding the quality of work performed by contractors and vendors. Also review and approve maintenance and repair invoices for payment., • 5+ years of related experience in office building operations., • Strong verbal and written communications skills., • Basic computer skills, particularly with Word and Excel., • Familiarity with City of Los Angeles Building & Safety Codes and South Coast Air Quality Management District Rules., • Appropriate professional or vocation certifications to work on building systems including mechanical, HVAC, life/safety or electrical systems., • Ability to handle multiple projects and make decisions., • Projects a professional image by meeting all dress code standards. Uniform to be provided., • Ability to exercise good judgment and professional demeanor interacting with building management, tenants and vendors. Team player attitude.Company DescriptionDouglas Emmett operates approximately 18 million square feet of Class A office space and over 5,000 luxury apartment units in nine highly desirable submarkets in Los Angeles County, six of which are located in Los Angeles' Westside - Brentwood, Century City, Santa Monica, Beverly Hills, the Olympic Corridor, and Westwood - and three submarkets in the San Fernando Valley - Sherman Oaks/Encino, Warner Center/Woodland Hills, and Burbank. The Company's Honolulu office portfolio is located in the downtown central business district with multifamily properties in nearby suburban communities. The Company utilizes the same focused business strategy that was implemented by its founding principals - managing, developing, redeveloping, and acquiring multifamily and commercial real estate in high barrier-to-entry submarkets that exhibit strong economic characteristics such as population and job growth, as well as inherent supply constraints, such as limited developable land due to natural and political barriers. The Company strives to capitalize on the experience of its seasoned management team to create continued value.Douglas Emmett operates approximately 18 million square feet of Class A office space and over 5,000 luxury apartment units in nine highly desirable submarkets in Los Angeles County, six of which are located in Los Angeles' Westside - Brentwood, Century City, Santa Monica, Beverly Hills, the Olympic Corridor, and Westwood - and three submarkets in the San Fernando Valley - Sherman Oaks/Encino, Warner Center/Woodland Hills, and Burbank. The Company's Honolulu office portfolio is located in the downtown central business district with multifamily properties in nearby suburban communities.\r\n\r\nThe Company utilizes the same focused business strategy that was implemented by its founding principals - managing, developing, redeveloping, and acquiring multifamily and commercial real estate in high barrier-to-entry submarkets that exhibit strong economic characteristics such as population and job growth, as well as inherent supply constraints, such as limited developable land due to natural and political barriers. The Company strives to capitalize on the experience of its seasoned management team to create continued value.

Job Description Company Overview We are partnering with a premier custom integrator known for delivering high-end residential and marine automation systems. With a global footprint and a reputation for excellence, this integrator blends cutting-edge technology with world-class design to create tailored solutions for some of the most discerning clients in the world. They uphold consistent, world-class standards across all their locations—domestically and abroad. Why Join Us? This is more than a job—it’s a lifestyle and a community. If you’re a lead technician with a strong work ethic and a passion for learning, you’ll thrive here. You'll benefit from: • Apprenticeship Program: Each Lead Tech is paired with an apprentice, allowing you to mentor the next generation while focusing on the work you love., • Elite Team Environment: Work alongside top-tier engineers, designers, and programmers—some of the best in the business., • Global Projects & Prestige: From Colorado estates to German yachts, you’ll contribute to iconic, high-end systems with an unmatched level of craftsmanship., • Leadership That Cares: Leadership is hands-on, engaged, and deeply committed to staff development and company culture. We’re seeking a Tech III Lead Technician to lead onsite execution for high-end AV, lighting, and automation systems. You’ll be the onsite point person responsible for installing, commissioning, and leading apprentices on complex residential technology projects. The ideal candidate has hands-on experience and thrives in environments where communication, accountability, and follow-through are just as important as technical skills. Responsibilities • Lead onsite installation and commissioning of AV, automation, and lighting systems, • Collaborate with internal teams (PMs, sales, design, and global engineering) for seamless project delivery, • Serve as a mentor and leader to a dedicated apprentice technician, • Interface with high-end clients and luxury builders to ensure an exceptional experience, • Coordinate with global teams for programming, design, and advanced support, • Understand and implement networking basics (IP addressing, reservations, static IPs), • Interpret and work from engineered drawings and schematics, • Work hands-on with systems including Crestron Home, Control4, Savant, Lutron, and Vantage, • 5+ years as a lead technician, but aptitude and attitude matter more than years, • Experience with AV rack installation, wiring, and system commissioning, • Working knowledge of at least one major automation system (Crestron, Control4, Savant, Lutron, or Vantage), • Ability and willingness to travel 50% to Coeur d'alene, Idaho, • Familiarity with basic networking concepts and willingness to learn more, • Strong leadership, mentorship, and communication skills, • Proactive, solutions-oriented approach—someone who picks up the phone instead of waiting for a text reply, • Willingness to adapt and continuously learn; coachable and accountable, • Must be comfortable working in a fast-paced, high-expectation, luxury environment, • Competitive salary with overtime eligibility, • Full suite of health, dental, and vision insurance, • Company-provided van (commuting permitted depending on location), • Paid time off and holidays, • Simple IRA with company match, • Temporary employee housing available for relocation transition, • Relocation assistance for the right candidate NDikblgqe0

Job Description At Senra Systems, we believe that the future of manufacturing lies not in automation, but in configuration. We supercharge electrical wire harness manufacturing through software configuration, transforming skilled assembly tasks into high-throughput production lines. We enable customers to design what they want, when they want it and deliver harness builds at record-breaking speed. As a Senior Harnessing Technician, you will serve as a technical leader on the production floor, executing the most complex builds, mentoring junior technicians, and supporting new product introduction efforts alongside engineering teams. You will set the standard for quality, speed, and technical excellence in the build process. What you'll own: • Execute complex harness builds with minimal guidance and high attention to detail., • Lead floor training sessions and mentor Apprentice and Harnessing Technicians., • Partner with Engineering on new product introduction and first article builds., • Identify, escalate, and help solve build and design issues., • Support updates to build documentation based on production feedback., • Champion 5S principles, safety, and quality initiatives., • High school diploma or equivalent certification., • 5–12 years of experience in harness manufacturing or related production environments., • Expert at reading complex schematics and executing high-quality builds., • Compensation will be based on experience, qualifications, and other job-related factors. This onsite role is currently based at our Redondo Beach HQ. We are planning to expand operations to Orange County in Q1 2026 (location and timeline subject to change). Team members hired into this role should expect to work from Redondo Beach initially, with a future transition to an Orange County facility once operational. Candidates should be comfortable with both commute locations. Benefits: • Unmatched opportunities to drive impact on a friendly and mission-driven team, • Own a piece of the pie with equity participation!, • Comprehensive medical, dental, vision, life and long-term disability coverage, • Flexible Spending Account (FSA) and Dependent Spending Account (DSA) for health-related expenses, • 20 vacation days per year and 12 company holidays for rest and relaxation, • 401(k) plan to set yourself up for retirement, • Choose a record you love, and we'll add it to our growing vinyl collection!, • $50/month DoorDash credit – lunch is on us!, • Up to $100/month reimbursement for gym memberships, • Fully stocked kitchen with snacks and beverages, • Regular team-building events, lunches, and the occasional breakfast burrito!, • Bright, open office with communal spaces for collaboration and free parking ITAR REQUIREMENTS: • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Pay range$30—$45 USD

Job DescriptionArcher’s Teaching Apprenticeship offers new and aspiring teachers the opportunity to partner with expert educators in the classroom using the latest research on how our students learn and thrive. Apprentices get hands-on experience working alongside master faculty to develop a repertoire of future-facing educational practices. Ideal candidates have a growth-mindset, positive outlook, and a deep appreciation for the importance of working in a diverse and inclusive community. A passion for working with young people in a culture of teaching excellence is a must. Responsibilities include: * co-teaching with a mentor in your discipline * subbing across the curriculum * participating in co-curricular school activities, * providing administrative support as necessary * supporting Archer Signature programs (i.e. Advanced Research, Artemis Center for Political Activism & Social Good, and Advanced Studies Symposium) The Apprentice Program includes: * Salary and full benefits * Co-teaching up to 2 classes with expert mentor teacher * Ongoing collaboration on curriculum and lesson design * A formalized teacher education program including: * Pedagogical instruction on research-based practices * Apprentice learning cohort * Individualized goal setting and ongoing planning and reflection meetings * Formal and informal observations with feedback * Resources to develop a repertoire of teaching tools and routines * Participation in all internal Archer PD * Professional networking opportunities * Observation and collaboration with skilled teachers within and beyond subjects * Peer support for professional growth, support, and reflection A bachelor’s degree is necessary; a master’s degree and/or teaching credential is preferred. The Archer School for Girls is an educational community that supports and challenges young women to discover their passions and realize their true potential. Integral to our mission, Archer has remained passionately committed to cultivating a diverse and inclusive community where students and teachers can thrive personally and academically. We look for candidates who want to join our joyful and ambitious learning environment and contribute to the diversity of experience, background, and interest in LA’s Independent Schools. Salary Range: $57,500 to $60,000 To apply, please click on the blue APPLY button. No phone calls, please. More information on Archer can be found at . The Archer School for Girls is an Equal Opportunity Employer.

Job Description Tired of working a job instead of building a career? Looking for freedom, income potential, and personal growth? Want proven training and a supportive team behind you? If that sounds like you, keep reading. Keller Williams is one of the most respected names in real estate, and we’re growing fast! We’re looking for driven individuals to join our team — whether you’re a licensed agent ready to take your career to the next level, or someone who’s ready to earn their license and start strong. • Licensed agents: We’ll show you how to plug into proven systems to generate leads, close deals, and scale your income., • Aspiring agents: We’ll help you get licensed and coach you every step of the way — so you can hit the ground running. Why Join Keller Williams? • Top-tier coaching & mentorship — learn from agents closing 6, 7, and even 8 figures, • Cutting-edge technology & marketing tools — make your job easier and more effective, • Proven lead generation systems — no more guessing where your next deal is coming from, • Collaborative team culture — you’re in business for yourself, not by yourself, • Flexible schedule — build your business around your life, • Upside income potential — the harder you work, the more you can earn We’ve had agents make more in their first few months here than they made in entire years at previous jobs. If you’re coachable, motivated, and ready to learn, we can help you do the same. Compensation: $125,000 - $295,000 yearly Responsibilities: • Assist in generating and nurturing leads to build a robust client base., • Participate in training sessions to master real estate sales techniques and strategies., • Collaborate with experienced agents to gain insights and practical knowledge., • Engage with potential clients to understand their needs and offer tailored solutions., • Utilize cutting-edge technology to streamline processes and enhance client interactions., • Contribute to team meetings with fresh ideas and a positive attitude., • Maintain up-to-date knowledge of the local real estate market and trends in Los Angeles-Long Beach-Glendale, CA area.Qualifications:, • Experience in customer service or sales roles, showcasing your ability to connect with clients., • Ability to learn quickly and adapt to new real estate technologies and tools., • Proven track record of working collaboratively in a team environment, contributing positively to group goals., • Strong communication skills to effectively engage with clients and understand their needs., • Willingness to participate in ongoing training and development to master real estate sales techniques., • Ability to maintain up-to-date knowledge of the local real estate market and trends in the Los Angeles-Long Beach-Glendale area., • Motivated to generate and nurture leads, building a robust client base over time.About Company At Keller Williams, our mission is clear: to fuel the success of real estate agents by delivering unparalleled resources, expert mentorship, and cutting-edge technology. We are dedicated to empowering agents to excel in a competitive market, providing the tools and support needed to drive growth, achieve goals, and thrive—every step of the way.