Trabajos Engineering en Surprise, ArizonaCrear alertas

Job Description Now Hiring: Facilities Fire Protection Engineer Location: Tempe & Peoria, AZ (Onsite – Construction & Operations Support) - starts in both locations, and then will transition to Peoria, AZ Employment Type: Full-time with 10% bonus Work Authorization: Due to the nature of the projects, candidates must be US Citizens or Permanent Residents Only We are seeking a skilled and proactive Facilities Fire Protection Engineer to support the design, construction, and operations of a large-scale, high-tech manufacturing facility. This role will lead efforts to ensure all fire alarm, fire protection, and hazardous gas monitoring systems are compliant, operational, and optimized to safeguard people and infrastructure. What You’ll Do: * Lead fire protection efforts during construction and transition into operational support * Ensure compliance with NFPA, ICC, AHJ, and insurance requirements across all systems * Review and guide design documents and third-party vendor submissions * Operate and maintain fire alarm, suppression, and hazardous gas monitoring systems * Conduct system inspections, perform maintenance, and identify system malfunctions * Develop and lead fire drill plans and emergency response readiness * Create testing, commissioning, and maintenance documentation for fire protection systems * Interpret construction drawings, verify installation quality, and provide improvement recommendations ✅ What You Bring: * Bachelor’s Degree in Engineering (Associate’s with additional experience may be considered) * 3+ years of experience in fire protection system design, operation, and compliance * Familiarity with detection, suppression, and life safety systems * Strong working knowledge of NFPA, ICC, and AHJ requirements * Ability to review design documents and oversee construction compliance * Proficient in Microsoft Office and technical drawing software * Strong communication, coordination, and problem-solving skills * Ability to work on ladders, at elevation, and in confined spaces * Willingness to work overtime or respond to off-hours emergencies as needed ✨ Preferred Qualifications: * Experience in high-tech, cleanroom, or industrial manufacturing environments * Familiarity with utility operations, energy efficiency initiatives, or environmental facility systems * Prior involvement in commissioning or facilities engineering projects * Trade certifications or licensing related to fire protection systems This is a unique opportunity to take ownership of critical life safety systems at a state-of-the-art facility from construction through operations. If you're ready to make a meaningful impact through smart, compliant, and proactive fire protection engineering—we want to hear from you. Apply today and help build and protect the future.

Job Description Sr. Engineer, Facilities Environmental (ATA) ngineer, Facilities Environmental (ATA) Job Details My client is one of the world’s largest providers of outsourced semiconductor packaging and test services. Position Summary: My client is seeking talented individuals who can grow with my client as an Environmental Engineer. Environmental Engineers are responsible for the overall tasks related to the Construction, Operation and Permitting of environmental facilities within the workplace. The Environmental Engineer is responsible for operating, maintaining, and troubleshooting Environmental Utilities including UPWS[Ultra Pure Water System], WWTS[Wastewater Treatment System(Organic, Inorganic, BRF)], and APCS[Air Pollution Control System]. Essential Duties and Responsibilities: • Maintains a clean, orderly, and safe workplace. Develops System Documentation including PM Job Plans, Operating Instructions, Out of Control Action Plans and Training., • Starts automatic feed of solid and liquid materials through equipment units, including heating, cooling and chemical vessels, mixing tanks, ion exchange beds, and filter presses., • Operates and controls pumping, cooling, heating, exhaust and associated systems to meet specifications within a wafer fabrication facility., • Performs maintenance and repairs on rotating equipment including pumps and fans., • Observes gauges, signals, and recording instruments, turns valves, and moves controls to regulate temperatures, pressures, and flow of wastewater, DI water, and chemical constituents through system to effect prescribed reaction within critical limits., • Performs diagnostic and troubleshooting practices to determine root cause and corrective actions needed to maintain systems operation within specifications., • Performs emergency and corrective maintenance actions to repair damaged equipment or correct out of specification conditions., • Ensures processing conditions and process output are within regulatory limits. Responsible for correcting conditions and alerting management of discrepancies, • Ensure all requirements as specified by the manufacturer of equipment systems are met, and equipment operations, repairs, modifications, and maintenance meet environmental protection requirements., • Develop and review plans, specifications, and cost estimates, construction safety and phasing plans, and updating electrical infrastructure layout plans that require coordination with owners, other disciplines, sub-consultants, and clients., • Additional duties based on business needs, including ERT. Required Qualifications: • Associate's degree in Environmental, Chemical, Wastewater, Atmospheric, or Mechanical Engineering., • A minimum of 3 years of experience in relevant fields., • Understanding of processes, permitting, and construction related to WWT, UPWS, APCS, etc., • Knowledge and understanding of Environmental Laws (NEPA, TSCA, RCRA, Clean Air Act, Clean Water Act, etc), OSHA, ISO 14001, EPA cert process, and risk identification and mitigation., • Demonstrates competence and comprehensive knowledge concerning adjacent disciplines such as automation controls, water, gas and chemicals or environmental., • Team building, analytical and problem-solving skills., • Effective written, verbal, presentation, and listening communications skills across functional departments and with external customers, contractors, and suppliers., • Computer skills including MS Office with the ability to operate corporate email, spreadsheets, word processing, engineering drawing databases at a highly proficient level., • Willingness and ability to work overtime when needed for business purposes, or to be called-in to work in the event of emergency or business needs. Preferred Qualifications: • Preference for candidates with experience in environmental facilities, large-scale plants, and construction site engineering projects in the semiconductor field., • Strongly prefer experience in facility management and maintenance of semiconductor/advanced manufacturing facilities., • Past experience in managing cleanroom utility equipment, facility optimization, energy-saving planning, and utility operations highly preferred.

Job Description Position: Facilities Architecture Engineer Location: Tempe, AZ (transitioning to Peoria, AZ) Industry: Advanced Manufacturing Overview: An industry leader in advanced manufacturing is seeking a Facilities Architecture Engineer to support the design, construction, and maintenance of a new advanced manufacturing facility. This role requires expertise in civil, structural, and architectural engineering as well as knowledge of cleanroom standards and building code compliance. Key Responsibilities: * Oversee construction schedules, safety, and compliance for facility development projects. * Develop and manage maintenance plans, budgets, and vendor estimates for operational buildings. * Ensure legal and regulatory compliance for building layout changes and renovations. * Plan and execute cleanroom construction/renovation projects while maintaining operational continuity. * Assess structural aspects like floor load capacity and vibration requirements for equipment installations. * Implement mitigation plans for noise, dust, and odors during construction. Required Qualifications: * Bachelor’s or Associate’s Degree in Engineering (with additional experience). * 5+ years in construction projects; 3+ years in design management. * Strong knowledge of industry codes, safety regulations, and cleanroom infrastructure. * Proficient in CAD; able to assess and implement building layout changes. Preferred: * Experience in the semiconductor or advanced manufacturing industry. * Familiarity with cleanroom utilities, energy-saving initiatives, and facility optimization. Work Environment: Initial work in Tempe; role transitions to onsite at Peoria facility. Occasional remote flexibility. Must be able to access confined spaces, elevated areas, and tolerate industrial environments.

Job Description Monday-Friday 6am-2:30pm Job Summary: The Mechanical Engineer will design, develop, and test all aspects of mechanical systems, equipment, devices, and machinery, ensuring they operate safely and efficiently. Duties/Responsibilities: • Designs products such as engines, machines, instruments, controls, or robotics., • Works with the Plant Manager and Assistant Plant Manager to create design sketches, layouts, and plans., • Uses computer-assisted design Solidworks, a 3D CAD software system to create preliminary and detailed drawings of the product and analyze mechanical systems, components, and devices. This includes everything from engines and machinery to HVAC systems and robotics and for simulation purposes., • Produces specifications for products and chooses raw materials and components to be used in production., • Builds models and prototypes of the product and tests the designs., • Conducts experiments and test to evaluate the performance of mechanical systems and ensure they meet safety and efficiency standards., • Develops control systems and monitors production., • Prepares detailed reports and documentation of designs, tests, and modifications, and present findings to management and clients., • Investigates equipment failures or difficulties to diagnose faulty operation and recommend remedies., • Analyze problems to see how mechanical and thermal devices might help solve a particular issue., • Design and re-design mechanical and thermal devices or subsystems, using analysis and computer-aided design., • Overseeing the manufacturing process for the device or unit., • Analyzing the test results and changing the design or system as needed., • Evaluating mechanical systems and products by designing and conducting research programs, applying principles of mechanics, thermodynamics, hydraulics, heat transfer, and materials., • Completing project's technical and financial feasibility studies., • Maintaining and modifying equipment to ensure safety, reliability, and optimal performance., • Documenting specifications, system narratives, and operational instructions., • Ensuring compliance with the project's technical standards, relevant health and safety regulations, and quality standards., • Manage projects using engineering principles and techniques., • Consider the implications of issues such as cost, safety and time constraints., • Excellent analytical and problem-solving skills and the ability to analyze complex problems and develop effective solutions to improve functionality and reliability., • Excellent mechanical and technical skills., • Proficiency with computer assisted design Solidworks, 3D CAD design and product development software., • Excellent written and verbal communication skills to convey technical information clearly to non-engineers and stakeholders., • Ability to work collaboratively in a multidisciplinary team environment and work closely with management and clients to ensure project specifications are met and to facilitate the manufacturing process., • Excellent proficiency with Microsoft Office Suite., • Excellent organizational skills and attention to details., • Experience with project scheduling tools and methodologies is preferred., • Knowledge of programmable logic controllers (PLCs) and their applications in automation is beneficial., • Strong understanding of engineering principles, materials science, and mechanical systems., • A bachelor's degree in mechanical engineering or a related field is required., • Prolonged periods sitting at a desk and working on a computer., • Must be able to lift up to 50 pounds at times., • Must be able to access and inspect all areas of machinery, including but not limited to tights spaces and large heights.Company DescriptionAdvance Services provides the most qualified and dependable employees in the market by using our unique comprehensive interviewing /screening process and partnering with our clients. This allows us to truly customize to the staffing needs of every client while still delivering the best possible employees. As the industry leader, Advance Services continues to grow with more than 1,400 clients nationwide and over 60 offices across the United States. EOE.Advance Services provides the most qualified and dependable employees in the market by using our unique comprehensive interviewing /screening process and partnering with our clients. This allows us to truly customize to the staffing needs of every client while still delivering the best possible employees. As the industry leader, Advance Services continues to grow with more than 1,400 clients nationwide and over 60 offices across the United States. EOE.

Job Description Position Summary: My client is seeking a Facilities Fire Protection Engineer who is responsible for supporting Design and Construction as well as leading the Operations and Maintenance team to ensure that our Fire Alarm (FAS) and Fire Protection systems (FPS) as well as our Hazardous Gas Monitoring Systems (HGMS) are always available and meet code. You will work with both internal and external teams to define, design, detail and document the various documents that protect our facilities and employees. This will include development of testing and maintenance procedures to meet NFPA, AHJ and Insurance carrier expectations. You need the ability to understand and interpret laws and regulations related to fire protection for building management. Additionally, you must be capable of maintaining and repairing fire protection systems. Essential Duties and Responsibilities: • Manage the schedule to ensure that the fire protection aspects of the entire construction project are proceeding on an appropriate timeline., • Ensure fire protection work is being carried out correctly in accordance with all regulations., • Establish maintenance plans for the fire protection facilities of the operational buildings, manage and operate fire prevention systems, and plan and conduct fire drills to prepare for fires., • Provide guidance and support for new manufacturing designs or ongoing retrofits to ensure the factory, office and support buildings remain within code., • Work with third party design vendors to review concept designs and designs in progress to ensure they meet established design standards, local code requirements, and any other requirements of the AHJ., • Commission and operate fire protection system equipment., • Create and manage manuals for fire protection systems., • Operate, manage, and maintain fire prevention systems, and identify and resolve causes of malfunctions and errors., • Develop and conduct inspection plans for fire prevention systems., • Interpret drawings and verify proper construction status., • Develop and conduct fire drill plans., • Contributes recommendations and suggestions for work method improvements, safety, materials, and tools. Required Qualifications: • Bachelor's Degree in Engineering; Associate's Degree from a Technical College may be considered with additional relevant experience in lieu of a BS Degree., • Trade Certification Program is preferred., • A minimum of 3+ years of experience with all aspects of fire protection, fire suppression systems, fire alarm and detection systems, fire-resistant construction, and life safety., • Familiarity with construction and preventive design, including facilities, semiconductor equipment, semiconductor chemicals, suppression, and chemical recognition., • Demonstrated experience in managing and operating fire prevention systems., • Competence in inspecting, maintaining, and repairing fire protection systems., • Knowledge of fire protection laws and regulations which include National Fire Protection Association (NFPA) and International Code Council (ICC) requirements., • Team building, analytical and problem-solving skills., • Effective written, verbal, presentation, and listening communications skills across functional departments and with external customers, contractors, and suppliers., • Computer skills including MS Office with the ability to operate corporate email, spreadsheets, word processing, engineering drawing databases at a highly proficient level., • Willingness and ability to work overtime when needed for business purposes, or to be called-in to work in the event of emergency or business needs. Preferred Qualifications: • Preference for candidates with experience in environmental facilities, large-scale plants, and construction site engineering projects in the semiconductor field., • Highly desirable to have previous experience in the semiconductor/advanced manufacturing industry., • Past experience in managing cleanroom utility equipment, facility optimization, energy-saving planning, and utility operations highly preferred., • Preferred experience in legal appointments and licensing related to trade-specific management. Location: This position will be based at the Arizona Tempe and Peoria sites during the Construction phase and will transition to Peoria for management during the Factory Operation phase.

Job Description Essential Duties and Responsibilities: • Manage automatic control systems for efficiency and issue resolution. Monitor system performance and propose improvements., • Manage the inventory of main tools, instruments, and materials, and order them in a timely manner when necessary to ensure smooth operations. Additionally, regularly inspect the condition of equipment, establish maintenance plans, and be able to troubleshoot issues., • Develop system documentation, including PM work plans, operating instructions, contingency plans, and training materials., • Manage permitting procedures for equipment installation and operation, ensuring compliance with regulations., • Manage the utility supply procedures (electricity, water, gas) required for the production line while optimizing energy use and reducing waste, ensuring stable supply by adhering to each utility's specifications (SPEC). Inspect and maintain utility equipment and systems., • Clearly define the project requirements and prepare bid documents to include the project's scope, schedule, budget, and technical specifications to ensure the selection of suitable contractors., • Supervise on-site work to ensure it proceeds according to plan, guaranteeing quality and safety. Quickly resolve any issues that arise and provide necessary guidance to workers., • Monitor and manage utilities distribution and use including power, steam, natural gas, water, compressed gas, air, fluids, instrumentation and control., • Ensure all requirements as specified by the manufacturer of equipment systems are met, and equipment operations, repairs, modifications, and maintenance meet environmental protection requirements., • Additional duties based on business needs, including ERT. Required Qualifications: • Bachelor's Degree in Engineering, Associate's Degree may be considered with additional relevant experience in lieu of a BS Degree., • Trade Certification Program is preferred., • At least 3 years' experience with maintenance and process systems, working in an industrial setting is highly preferred., • Demonstrated knowledge in operation of industrial and/or commercial processing equipment, semiconductor is preferred., • Demonstrated knowledge of industry standards, codes and regulations, and the ability to apply to maintenance operation of the site's mechanical systems., • Ability to follow all safety policies and procedures at all times., • Knowledge and understanding of chillers, boilers, cleanroom temperature/RH/particulates as well as air abatement and automation. Preferred Qualifications: • Previous experience in the semiconductor/advanced manufacturing industry is preferred., • Experience managing or working in a cleanroom with utility equipment, facility optimization, energy-saving planning, and utility operations is preferred.

Job Description ⚡ Facilities Electrical Engineer – Semiconductor Manufacturing Location: Peoria, AZ (starts in Tempe, then transitions to Peoria)| Onsite with occasional remote days We are seeking a Facilities Electrical Engineer to own and manage high- and low-voltage electrical systems (up to 12.4kV), including UPS and emergency generators, for their new advanced manufacturing facility, currently under construction. This is a key role ensuring safety, capacity, and reliability of all facility electrical infrastructure. Key Responsibilities: * Act as SME for site electrical power systems; support design, maintenance, and advanced troubleshooting * Perform load calculations, manage electrical load database, and ensure power distribution stability * Conduct preventive maintenance for transformers, UPS, generators, and batteries * Develop and maintain system documentation: PM plans, SOPs, training, RCA reports * Coordinate with utilities, review Arc Flash and fault analysis, and lead risk mitigation * Support cleanroom utilities and facility infrastructure expansion efforts Required Qualifications: * B.S. in Electrical Engineering and 3+ years of relevant experience * Strong knowledge of electrical codes, coordination studies, and system design in industrial settings * Hands-on experience with large power systems, switching, and infrastructure layout * Semiconductor or electric utility industry experience preferred * Familiarity with related systems (controls, mechanical, water, gas, etc.) is a plus Other Details: * Initial work location in Tempe HQ; transitions to Peoria facility * Occasional remote work flexibility * Physical ability to safely access elevated and confined areas required * Due to the nature of the projects, all candidates must be a US Citizen or permanent resident

Job Description The Civil Facilities Engineer is responsible for the planning, design, construction, and maintenance of civil infrastructure and facility system Key Responsibilities: Design and Planning Project Management Maintenance and Operations Compliance and Safety Qualifications: * Bachelor's degree in Civil Engineering or a related field (Master's degree preferred). * Experience: * Minimum of 3–5 years of experience in civil engineering, with a focus on facilities management, construction, or infrastructure maintenance. * Experience with project management, including budgeting and scheduling. * Skills & Knowledge: * Proficient in civil engineering design software (AutoCAD, Civil 3D, etc.). * In-depth knowledge of building codes, safety regulations, and environmental standards. * Strong problem-solving and analytical skills. * Excellent communication and teamwork abilities. * Ability to manage multiple projects simultaneously.

Fire Control Technician (FT) FTs operate, test, and maintain submarine combat control systems. Sonar Technician, Submarine (STS) STSs specialize in underwater acoustic technologies. Electronics Technician (ET/RF AND ET/NAV) ETs focus on installing, administering, and maintaining onboard communicatio

Job Description Wyyerd Fiber is seeking a skilled Fiber Engineer to join our team and play a crucial role in the planning, evaluation, and execution of fiber network projects. This position requires a strong technical background in fiber-to-the-home (FTTH) network design and construction, as well as the ability to collaborate with external partners and internal teams to optimize project costs and efficiency. The Fiber Engineer is a vital part of the Wyyerd team as it supports the OSP Engineering & Construction teams that are responsible for working with outside contractors to enable the rapid deployment of its broadband network. Responsibilities ● Analyze high-level engineering designs to support project evaluation and selection. ● Collaborate with design and engineering firms to ensure alignment with project goals, regulatory requirements, and cost constraints. ● Assess and recommend alternative construction methods to reduce build costs while maintaining quality and compliance. ● In certain cases, develop detailed construction designs based on cost analysis, feasibility studies, and project requirements. ● Provide cost estimates and forecasts for fiber deployment projects. ● Ensure designs adhere to industry standards, permitting regulations, and company guidelines. ● Support the construction team with technical guidance, troubleshooting, and design modifications as needed. ● Stay updated on emerging fiber technologies and industry best practices to drive continuous improvement. Experience/Qualifications ● High school diploma or equivalent ● College degree and/or equivalent 3 to 5 yrs experience in similar field ● Positive attitude, willingness and eagerness to learn new things ● Ability to understand/learn the fiber network construction process ● Working computer knowledge ● Understanding and interpreting plat maps ● Telecommunications wiring color-code competency ● Must have clean driving record ● Ability to pass drug test ● Understanding of ISP/OSP services ● Ability to work with others on all responsibilities

Job Description Wyyerd Fiber is seeking a detail-oriented and experienced MDU Fiber Engineer to lead the engineering, planning, and implementation of fiber-optic infrastructure within Multi-Dwelling Unit (MDU) properties. This role is responsible for designing and costing fiber installations in apartment complexes, condos, townhomes, and mixed-use buildings. You’ll collaborate closely with construction teams, property managers, sales, and internal engineering resources to ensure scalable, cost-effective, and timely fiber deployment in MDU environments. Key Responsibilities: 1. Fiber Design & Planning • Design fiber-optic infrastructure for both greenfield and brownfield MDU properties., • Develop detailed fiber distribution designs (FTTP/FTTB), including riser, lateral, and backbone routes., • Create construction-ready documents using AutoCAD, Visio, GIS, or fiber design tools., • Analyze building plans, floor layouts, and conduit pathways for optimal fiber routing. 2. Site Surveys & Field Engineering • Conduct in-person site walks and pre-installation surveys to assess serviceability., • Identify access points, equipment room locations, and pathways for fiber installation., • Work with property owners and building engineers to coordinate access and installation logistics. 3. Coordination & Project Execution • Work cross-functionally with internal construction, OSP/ISP teams, permitting, and provisioning teams., • Support project management teams by providing technical input and addressing field issues., • Ensure engineering designs are executable and meet local code, safety standards, and customer requirements. 4. Documentation & Compliance • Maintain detailed documentation for each MDU project, including splicing diagrams, fiber schematics, and BOMs., • Update fiber asset management tools and records., • Bachelor’s degree in Telecommunications, Engineering, or a related field (or equivalent experience)., • Experience with fiber architectures (GPON, Active Ethernet, FTTx)., • Proficiency with engineering/design tools (e.g., AutoCAD, GIS, Visio, OSPInsight, VETRO)., • Knowledge of structured cabling systems, riser/backbone design, and building telecom codes., • Experience with MDU deployments (garden-style, mid-rise, high-rise, mixed-use)., • FOA CFOT, BICSI RCDD, or similar certifications., • Familiarity with permitting and make-ready processes., • Split between office and on-site field visits., • Travel required within assigned region or project area., • Must be able to lift up to 25 lbs. and navigate construction environments.

Job Description Job Summary: Wyyerd Fiber is seeking a highly skilled and motivated SMB (Small and Medium Business) Fiber Engineer to join our growing team. The ideal candidate will be responsible for designing, costing, and creating detailed scope of works for all SMB projects. This role involves field work, technical design, coordination with construction teams, sales teams, and ensuring timely and high-quality fiber delivery to business customers. Key Responsibilities: 1. Fiber Design & Planning: • Design fiber-optic paths and architecture for SMB customers (FTTP/FTTB)., • Utilize GIS, CAD, and fiber design tools to develop construction-ready designs., • Coordinate with internal teams and 3rd party vendors for permits and planning. 2.Field Engineering: ○ • Conduct site surveys and feasibility studies to evaluate fiber serviceability., • Identify best routing options for fiber drops and lateral extensions., • Provide engineering support during and after fiber installation. 3. Project Management: • Manage multiple fiber deployment projects for SMB customers., • Work cross-functionally with construction, sales engineering, and provisioning teams., • Ensure projects are delivered on time and within budget. 4. Documentation & Compliance: • Maintain accurate documentation of fiber routes, splicing, and network elements., • Ensure compliance with local codes, standards, and safety regulations., • Update asset databases and engineering records (e.g., Fiber Management Systems). 5. Customer Engagement: • Collaborate with pre-sales and sales teams to assess customer needs., • Act as a technical point of contact during the customer onboarding process. Qualifications: • Bachelor’s degree in Telecommunications, Engineering, or related field (or equivalent experience)., • 3+ years of experience in fiber-optic engineering or network deployment., • Strong knowledge of fiber technologies., • Proficiency in tools such as AutoCAD, GIS, Visio, or Fiber Management Software (e.g., VETRO, OSPInsight)., • Familiarity with permitting, make-ready, and utility regulations., • Excellent problem-solving and project coordination skills., • Ability to travel locally to customer and job sites as needed. Preferred Qualifications: • Experience working with small and medium business customers., • Understanding of last-mile fiber design and deployment challenges., • Knowledge of construction workflows and telecom permitting processes. Work Environment: • Hybrid of office and field-based work., • Must be able to work outdoors in various weather conditions when required., • Occasional lifting of tools and equipment up to 25 lbs

Focus on the core content of the job post, removing all unnecessary metadata, navigation links, and extraneous details.The goal is to present a clean, beautiful, and high signal-to-noise ratio job description.

Typically requires Bachelor’s degree in Industrial Engineering, Systems Engineering, or Manufacturing Engineering, or similar engineering discipline with a. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay

Actively seeking a skilled Data Engineer with a vast background in coding ETL Pipelines from scratch. As a clinical trial health care company, you will be collaborating with other engineers to optimize every pipeline. As a Data Engineer, your main responsibilities will include; pulling and pushing d

Advanced Degree in Electrical Engineering, Systems Engineering, Mechanical Engineering, Engineering Mechanics, Computer Science, Engineering Science, Business Administration and/or Robotics. Experience in System Security Engineering, computer technology reverse engineering, AT, cybersecurity or embe

They’re looking for an Azure DevSecOps Engineer to help build and maintain secure, high-performing systems across their Azure environment.

Experience with: System Safety Engineering, Electrical Engineering, Systems Engineering, Computer Engineering, Software or Firmware Engineering, or equivalent Safety Engineering. Interfacing with other engineering functions: Systems Engineering, Electrical Engineering, Software or Firmware Engineeri

This company is a comprehensive subsurface engineering firm. Oversee all aspects of Subsurface Utility Engineering (SUE) projects, including initial project proposals, planning, execution, monitoring, and closure. Bachelor's degree in Civil Engineering, Geomatics, or a related field.

Environmental Test (ET) is an engineering organization that supports all programs across Raytheon. Environmental Test is seeking a Principal Test Engineer for the Environmental Test Vehicles (ETV) group. The Test Engineer will be responsible for performing planning, vehicle design, development, buil

Create, manage, and track RFI's from the field to the Architect/Engineer of record.

Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 5 years of prior Engineering experience. Experience with subsystems integration and test, post test flight analysis, problem investigation, Statistical Process Control (SPC) methods in achie

We are seeking an experienced and results-driven Construction Project Manager to oversee and manage multiple commercial construction projects nationwide.The ideal candidate will have a strong background in commercial construction management, a proven ability to lead teams and seamlessly work with su

Senior Systems Engineer - Navigation Engineer. Senior Systems Engineer – Navigation Engineer. Experience with and demonstrable achievement in systems engineering principals with regards to product development.

Create, manage, and track RFI's from the field to the Architect/Engineer of record.

Demonstrated experience leading a small team of engineers. Degree in Mechanical or Aerospace Engineering. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat.

Commercial Paint Project Manager/Estimator.GPAC: #1 Commercial Paint Recruiting Firm in the Nation: WORK FOR A LEADING CONTRACTOR.I am working with a well-respected, firmly established Commercial Paint Contractor seeking an experienced Project Manager/Estimator.This is an exciting opportunity to bec

You’ll experience the full Systems V engineering lifecycle while working alongside diverse engineering disciplines, subject matter experts, chief engineers, and technologists to deliver systems that perform flawlessly for our warfighters. Typically requires a Bachelor’s in science, Technology, E

Create, manage, and track RFI's from the field to the Architect/Engineer of record.

Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 5 years of prior Engineering experience. Our multi-disciplined teams manage a variety of engineering projects while maintaining a work life balance. Collaborate and coordinate with Operation

Project Manager - NextGen Video.The NextGen Video Project Manager is tasked with receiving, organizing, producing, and coordinating video projects for the NextGen ministries at CCV.This role must work with NXG Central teams (Kids, Students, STARS, Worship, Special Needs) and Production staff to coll

The Hardware Engineering, Shipboard Effectors Department is seeking Mechanical Engineers for our Tucson AZ site supporting full program life cycle, early development, production support, and legacy sustainment activities across the Standard Missile family of programs. We bring the strength of more t

Commercial Paint Project Manager/Estimator.GPAC: #1 Commercial Paint Recruiting Firm in the Nation: WORK FOR A LEADING CONTRACTOR.I am working with a well-respected, firmly established Commercial Paint Contractor seeking an experienced Project Manager/Estimator.This is an exciting opportunity to bec

We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our 4000+ software engineers design, develop, and build innovative solutions for our customers. As part of the Software Engineer

Create, manage, and track RFI's from the field to the Architect/Engineer of record.

Bachelor’s degree in Science, Technology, Engineering, or Mathematics. Minimum of eight (8) years of technical / engineering experience in mechanical design and/or production support. Systems engineering experience.

Data Entry / Remote] - Anywhere in U.Competitive pay - As a Data Verification Analyst at Foundation AI, you will: Process, segregate, review, and validate data provided in various formats according to changing process requirements; Prepare, compile, and organize documents for data capture, ensuring

Bachelor’s degree in Electrical Engineering or related Science, Technology, Engineering, or Mathematics (STEM) major. We are seeking entry-level candidates willing to collaborate, innovate, and team with our engineers to generate and utilize today’s cutting-edge technology in production environm

Data Entry / Remote] - Anywhere in U.Competitive pay - As a Data Verification Analyst at Foundation AI, you will: Process, segregate, review, and validate data provided in various formats according to changing process requirements; Prepare, compile, and organize documents for data capture, ensuring

We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Raytheon is seeking software engineers that have experience with developing software architecture, design of software, coding, t

Position: Senior Network Administrator.Shift Details: 8:00 AM - 5:00 PM, Monday-Friday.Work Location: Hybrid — Travel required up to 50%.RI International's pay range policy: This range is provided by RI International.Your actual pay will be based on your skills and experience — talk with your re

The Energetics and Propulsion Department is an engineering organization in the Hardware Engineering Directorate. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. The department

Bachelor's degree in Business, Communications, Education, Engineering, or related field and 2 years' experience in training, quality, product development, or related area OR 4 years' experience in training, quality, product development, or related area.

TEE has job opportunities across all phases of the engineering lifecycle, including demonstrations, early engineering tests, design verification tests, production, and post-production sustainment. Prioritize and handle multiple software engineering tasks concurrently. Work in a multidiscipline engin

Full-Time | 100% Onsite | Temp-to-Hire.We are seeking a highly skilled and detail-oriented.This role is critical in supporting day-to-day operations by transforming large datasets into clear and actionable insights.The ideal candidate will have advanced Excel expertise, strong problem-solving abilit

Experience leading engineering teams in delivering systems (of various size) involving the integration of hardware and software. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat.

Data Entry / Remote] - Anywhere in U.Competitive pay - As a Data Verification Analyst at Foundation AI, you will: Process, segregate, review, and validate data provided in various formats according to changing process requirements; Prepare, compile, and organize documents for data capture, ensuring

We are looking for a finance professional to join our team to train AI models.You will measure the progress of these AI chatbots, evaluate their logic, and solve problems to improve the quality of each model.In this role you will need to hold an expert level of financial reasoning- a completed or