Four day work week jobs in Raleigh, North CarolinaCreate job alerts

At Duke Health, we're driven by a commitment to compassionate care that changes the lives of patients, their loved ones, and the greater community. No matter where your talents lie, join us and discover how we can advance health together. About Duke Raleigh Hospital, A Campus of Duke University Hospital Pursue your passion for caring with the Duke Raleigh Campus in Raleigh, North Carolina. With 204-beds, it is the third largest of Duke Health's four hospitals and offers a comprehensive array of services, including cancer, cardiovascular, neuroscience, advanced gastrointestinal, and wound healing care. A Commitment Bonus of up to $25,000 is available for eligible radiation therapists with three or more years of experience. A Commitment Bonus of up to $15,000 is available for eligible radiation therapists with less than three years of experience Work Week: This is a full-time position scheduled for 10:30 AM to 7:00 PM, five days per week. Please note that this role is part of our permanent late shift, and actual working hours may vary depending on patient volume and the timing of the final treatment each day. Shift times typically range between 8:00 AM and 4:30 PM to 10:30 AM and 7:00 PM. General Description of the Job Class Apply ionizing radiation to the patient (inclusive of pediatric, adult, and geriatric populations) in accordance with the prescription and instructions of the Radiation Oncologist and under the general supervision of the Chief Therapist. Duties and Responsibilities of this Level * Deliver accurately the prescribed planned course of radiation therapy with minimal supervision. * Check prescription, diagnosis, chart and patient identification. * Explain procedure to patient, means of communication during treatment and procedure to follow if emergency arises during treatment. *Reinforce Radiation Oncologist's advice to patient regarding reactions to treatment and their care. * Prepare room and equipment for patient according to prescription regarding immobilization devices, field size, treatment distance, lead protection devices, etc. * Transfer patient safely to treatment couch, giving special care to catheters, intravenous drips, etc. * Check daily treatment time and delivers prescribed dose. *Maintain visual and audible communication with the patient during treatment. * Maintain patient markings. Observe patient for unusual reactions and events and report accurate information to the nursing staff and/or Radiation Oncologist. * Observe radiation safety measures for patient and personnel. * Perform simulations. * Assist in tumor localization procedures, preparation of immobilization devices, etc. * Assist in dosimetry procedures (i.e. Prescription calculations). * Obtain weekly port films and present such at chart rounds for review by Radiation Oncology staff. * Assume weekly on- call status on a rotation basis. (Applies to Duke staff therapist only) * Perform and document daily accelerator warm-up and QA procedures.(DRH and RCH) * Maintain records of daily treatment and other records as required by department quality assurance and quality improvement activities. * Perform mold room duties.(DRH and RCH) * Secure and maintain supplies. * Secure x-ray and lab reports as needed. * Report erratic operation of equipment to Chief Radiation therapist, Radiation Physicist and/or Medical Engineer. * Particpate in departmental PI (Performance Improvement) activities. * Assist in the hiring and orienting of new personnel. * Attend weekly QA rounds, monthly therapy meetings, and educational in-services. * Incorporate department and hospital policies and procedures into care provided. Required Qualifications at this Level Education * Satisfactory completion of a 24 month course in radiology technology and a 12 month course in radiation therapy technology; or * Satisfactory completion of a 24 month course in radiation therapy technology; or * Registered Nurse who has satisfactorily completed a 12-month course in Radiation Therapy technology; or * Satisfactory completion of a Bachelor of Science degree in Radiation Therapy. Experience One year clinical training in Radiation Therapy. Degrees, Licensure, and/or Certification • Current licensure as required by state or national authority and/or certification or board eligible in Radiation Therapy by the American Registry of Radiology Technology., • Maintain ARRT certification in radiation therapy with a minimum of documented 12 hours of continuing education. Knowledge, Skills, and Abilities • Knowledge in principles, practices and procedures involved in the operation of ionizing radiographic and radiation therapy equipment., • Knowledge of the human anatomy and proper positioning of the patient to provide treatment as prescribed., • Ability to administer CPR in a medical emergency. Distinguishing Characteristics of this Level N/A Duke is an Equal Opportunity Employer committed to providing employment opportunity without regard to an individual's age, color, disability, gender, gender expression, gender identity, genetic information, national origin, race, religion, sex (including pregnancy and pregnancy related conditions), sexual orientation or military status. Duke aspires to create a community built on collaboration, innovation, creativity, and belonging. Our collective success depends onthe robust exchange of ideas—an exchange that is best when the rich diversity of our perspectives, backgrounds, and experiences flourishes. To achieve this exchange, it is essential that all members of the community feel secure and welcome, that the contributions of all individuals are respected, and that all voices are heard. All members of our community have a responsibility to uphold these values. Essential Physical Job Functions: Certain jobs at Duke University and Duke University Health System may include essential job functions that require specific physical and/or mental abilities. Additional information and provision for requests for reasonable accommodation will be provided by each hiring department.

Description Become part of an inclusive organization with over 40,000 teammates, whose mission is to improve the health and well-being of the unique communities we serve. Position qualifies for our Athletic Trainer Incentive Program: $10,000 paid over a three (3) year commitment period. Payment is spread over a 3-year period in six (6) installments. Payment is made after each six (6) month period of work is completed. Summary: This position will require that the applicant possesses the clinical evaluation and educational skills expected of an athletic trainer working in a physician extender role. The athletic trainer is responsible for the following functions regarding athletic injuries prevention, assessment, treatment, and reconditioning as set forth by the NATA Board of certification. The athletic trainer will demonstrate proper taping, strapping, bracing, and fitting of athletic equipment. The athletic trainer will carry out all prescribed treatments and recommendations by the team/program/event physician. This position may work as an embedded member in a school where clinical supervision is limited. Responsibilities: 1. Casting and Patient Care- Casting patients, providing splints, braces, crutches and other DME and provide patient education for these items. Staple or suture removal, preparing injections, taking vital signs and stocking and cleaning rooms., 2. Disability Cases- Answering patient clinical phone calls in a timely manner and completing disability paperwork., 3. Patient Education- Educate patients on home exercise programs and therapeutic exercise. Communicates effectively with patients and staff members., 4. Patient Information- Rooming and obtaining the necessary patient information to update the patient history and chart. Reviewing clinic schedules and charts to verify all of the appropriate test results or patient information related to the appointment have been received. Order appropriate x-ray, lab or other medical tests as indicated. Performance of a thorough medical history and appropriate physical examination on patients with appropriate documentation. The Department of Orthopaedics at UNC is built upon core values that encompass clinical care, operations, teaching, research, and an unwavering commitment to our people. Nestled within our team is a group of exceptionally skilled and patient-centered individuals, comprising physicians, physician extenders, and staff. Their collective expertise equips us to address a diverse array of musculoskeletal needs within our community. Our specialized network includes experts focused on sports medicine, re-injury prevention, hand/wrist/elbow, knee & hip, foot & ankle, orthopedic oncology, pediatrics, and trauma services. Spanning across four locations, namely UNC Orthopaedics at Carolina Pointe II, UNC Orthopaedics Ambulatory Care Center (ACC) on the UNC Chapel Hill campus, UNC Orthopaedics-Weaver Crossing near the Chapel Hill/Durham border, and our newest addition, UNC Orthopaedics at Panther Creek in Cary, our facilities are strategically positioned to serve a wider population. Should you join our department, you'd become part of a uniquely skilled and motivated team comprising athletic trainers, nurses, medical assistants, and orthopaedic cast technicians. Our exclusive cadre of orthopaedic physicians and advanced practice providers is deeply dedicated to ensuring exceptional and equitable care for every patient in our communities. This environment offers an opportunity to work and grow alongside a talented team, contributing to our shared goal of delivering outstanding patient care. Other Information Other information: Education Requirements: ● Bachelor’s degree in an appropriate discipline. Licensure/Certification Requirements: ● Certified Athletic Trainer (ATC) certification ● Licensed as an Athletic Trainer by the North Carolina Board of Athletic Trainer Examiners or license eligible. ● BLS for healthcare providers. Professional Experience Requirements: ● One (1) year of experience as an athletic trainer preferred. Knowledge/Skills/and Abilities Requirements: ● Excellent verbal and written communication skills, including the use of relevant medical terminology. Job Details Legal Employer: STATE Entity: UNC Faculty Physicians Organization Unit: FP Ortho at PantherCreek PAYR Work Type: Full Time Standard Hours Per Week: 40.00 Salary Range: $23.01 - $33.07 per hour (Hiring Range) Pay offers are determined by experience and internal equity Work Assignment Type: Onsite Work Schedule: Day Job Location of Job: US:NC:Cary Exempt From Overtime: Exempt: No This is a State position employed by UNC Health Care System with UNC Health benefits. If, however, you are presently an employee of another North Carolina agency and currently participate in TSERS or the ORP, you will be eligible to continue participating in those plans at UNC Health. Qualified applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. UNC Health makes reasonable accommodations for applicants' and employees' religious practices and beliefs, as well as applicants and employees with disabilities. All interested applicants are invited to apply for career opportunities. Please email if you need a reasonable accommodation to search and/or to apply for a career opportunity.

Job Description Overview Step into an exciting and dynamic role as an X-Ray Technologist, where you'll bring life-saving diagnostic imaging directly to patients in diverse locations. From supporting the diagnosis and treatment of diseases and injuries, to playing a key role in enhancing patient care, image quality, and operational efficiency, you'll make a tangible impact on every patient you serve. You'll also have the opportunity to mentor and train fellow technologists, further elevating the standard of care within the team. With competitive pay, exceptional benefits, generous shift differentials, and on-call pay, this is more than just a job—it's a chance to thrive and make a difference. Exciting Perks You’ll Love: • Newly Added: Weeknight and weekend shift differentials for extra earnings, • Competitive Compensation & Benefits to keep you supported., • Company Vehicle Provided: no need to worry about transportation, • Flexible Schedule Options: Choose between five 8 hour shifts or four 10 hour shifts per week, to fit your lifestyle., • Convenient Hours of Operation from 6:00am to 10:00pm., • On-Site Training: We’re committed to your growth, • License Requirements: ARRT, • Opportunities for Growth: Build your career with us and move up, • License Renewal Reimbursement to keep your credentials up-to-date. Responsibilities * Your day-to-day experience as a mobile radiologic technologist will include: • Travel by vehicle to perform portable x-rays in a variety of settings, including nursing homes, assisted living facilities, correctional institutions, residential homes, and other patient locations., • Determine proper electronic and technical factors based on patient needs., • Follow ALARA principles for reducing radiation exposure., • Prepare accurate physician and patient orders and transmit reading as required in a timely manner., • Set, adjust, and operate a variety of electronic equipment to obtain diagnostic images that may include EKG’s and Holter Monitor., • Ensure the equipment is available and in working order (in the vehicle) prior to shift start and shift end., • Assist with order taking, validation of studies, communication with reading radiologists, customer call-backs, and other administrative and customer support functions as directed.. Qualifications * • Meet all state-specific and federal requirements to perform portable x-rays, including one or more of the following:, • Registered with the American Registry of Radiologic Technologists (ARRT) as a Radiologic Technologist RT (R), • Full scope Scope X-ray Operator — in accordance with State-specific requirements, • State x-ray license (if applicable), • Has a valid state-issued driver's license and maintains a good driving record, • Ability to move or lift equipment up to 50 pounds, • Ability to walk up and down stairs easily while carrying equipment, • Ability to work a varied schedule that may require evenings, holidays, and weekends.

Job Description Company Overview JustGreen Lawn & Landscaping is a full-service, boutique lawn and landscaping firm operating in Knightdale, NC. We are committed to building strong teams which allows each team member the ability to achieve their personal and professional goals. Our #1 focus is our employees as we believe by creating the best culture and environment to work in, we will be able to serve our customers above their expectations. Job Summary Our Residential Lawn Maintenance Foreman will provide service to residential and small commercial properties. This includes visiting each property on a weekly basis to maintain the property to the standards of JustGreen and the preference of the customer. Responsibilities and Duties • Mow, edge, weedeat and blow each property based on the customer's preference., • Weed control in all of the landscaping beds to maintain a neat and manicured look., • Drives company-provided vehicles on pre-determined daily routes., • Use our mobile application to take customer notes, track time on the job, and mark jobs complete., • Speak with customers while on route regarding their lawn and landscaping needs., • Maintain vehicle and equipment via daily equipment and vehicle checks before/after each day., • High School Diploma (or GED equivalent), • Valid Driver's License in the State of North Carolina, • Clean driving record, • Ability to read and interpret documents such as chemical warnings, mix rates, safety rules, operating instructions, and procedure manuals., • Ability to meet the physical demands of the position including, but not limited to, bending, hunching, kneeling, standing, balancing, climbing, stooping, crawling, walking, pushing, pulling and lifting 50+ lbs., • Ability to write and type customer reports, job reports, etc., • NC Pesticide License a plus, but not required., • JustGreen offers all of its employees paid federal holidays as well as one week's paid vacation during the holidays., • Four-day work week., • We like to enjoy our weekends too which means we never work on the weekends. 6meCUpdwwa

Job Description POSITION STATEMENT: The Service Coordinator ensures the smooth day-today operations of Wake Enterprises sites by supervising program services staff. Monitors and ensures the implementation of programming goals for participants. Provides professional supervision for staff and volunteers and assures compliance with all applicable regulatory standards necessary for service delivery including requirements of funding sources and staff training requirements. Section 3: Major Responsibilities RESPONSIBILITIES OF THE JOB AND ESSENTIAL ELEMENTS: • Adheres to Wake Enterprises Code of Ethics., • Assures that no person is subject to abuse, neglect, and/or exploitation., • Recognizes obligation to report any suspected abuse, neglect, and/or exploitation., • Provides leadership and professional supervision for Associate Professionals, Direct Support Professional and Employment Specialists. Assures supervision plans are complete on all staff assigned to site or service location., • Coordinates daily operations, including transportation, and provides supervision to staff at assigned site or service location., • Assumes responsibility for assigned participant caseload., • Completes documentation necessary to admit and discharge participants., • Ensures that caseload is at capacity. Reaches out to MCOs and Residential Agencies to obtain referrals for new participants. Meets goals regarding annual growth. Conducts agency tours for new potential participants., • Initiates contact and represents Wake Enterprises at service plan meetings for which another agency is the lead agency. Coordinate meeting and writes service plans when lead agency., • Reviews quarterly reports, updates program goals and objectives. Coordinates and confers with agency program staff, parents, outside administrators, testing specialists, social workers and case managers to develop or review participant’s treatment program., • Assures all participant plans, documentation and authorizations are current. Review and signs off participant daily goals ensuring compliance with regulatory requirements., • Documents (manually and electronically) participant time and services. Assures accuracy of time records. Communicates with Quality Assurance Specialist when complete. Responsible for timely and accurate billing submission., • Coordinates with QAS to investigates, signs off and distributes incident reports. Responsible for maintaining regulatory compliance., • Coordinates, monitors, and evaluates the implementation of program activities considering the physical, emotional, educational levels and preferences of individual participants. Assures compliance with behavior plans. Directly observes staff/staff and staff/participant interaction on and off-site., • Plan special events and activities both on-site and in the community considering participants treatment goals and preferences. This includes off-site check-ins as appropriate., • Responsible for assuring standards implementation relating to CQL accreditation. Coordinates monthly POM data collection for participants and submits results to QAS., • Assures compliance with all applicable standards necessary for service delivery. Participates in all audits and agency self-audits., • Schedules and coordinates staff ensuring proper coverage. Assures assigned sites are operating within capacity. Acts as a back-up DSPs/Aps/ESs and other Service Coordinators., • Monitors building and fleet maintenance and communicates any issues to Facility/Transportation Coordinator., • Train and advise staff on service delivery, person-centered planning, documentation requirements, confidentiality, participant rights and incident/accident reporting. Trains staff on implementation and documentation relating to behavior plans., • Communicates program needs to staff and management, including needs for policy development and/or revisions necessary for effective administration of services., • Partners with HR representatives and QAS to schedule staff training days including any outside contracted training needed., • Coordinates and conducts staff in-service monthly meetings. Assures completion of minutes relating to staff meetings. Relays Agency policy/procedures to staff., • Supervises and evaluates assigned staff in accordance with organizational policy/procedure. Coordinates with HR and provides guidance and/or disciplinary action when necessary., • Work with Peer Mentors to ensure adequate onboarding for new staff and retention of new staff. Actively engaging in staff retention activities such as planning activities for DSP week and implementation of retention programs., • Participates in Safety, Admissions, Human Rights & Quality Improvement workgroups., • Keeps attendance records and payroll information for all staff assigned to location. Assures accuracy of information and approves timecards on time., • Monitors supplies inventory and submits requests to replenish office and program supplies; purchase supplies as necessary., • Maintains effective working relationships with participants, staff and other professionals., • ADHERE TO AND FOLLOW, • The By-Laws of the Corporation and as set forth in the Articles of Incorporation Section 6: Job Qualifications and Competencies Job Qualifications Education and Experience: MINIMUM EDUCATION AND EXPERIENCE QUALIFICATION REQUIREMENTS: • Bachelor’s degree in an unrelated field with four years post baccalaureate accumulated experience with the population served. (Service Coordinator) One-year supervisory experience preferred., • Must have a valid North Carolina Driver’s License, personal vehicle and insurance and be eligible to be placed on Wake Enterprises insurance coverage., • Must have NCI certification., • Must have First Aid/CPR Certification., • Must have Medication Administration Certification., • Strong verbal and written communication skills;, • Strong documentation skills;, • Excellent judgment, problem solving, organizational, and time management skills., • Excellent interpersonal skills and ability to communicate effectively., • Physical ability to fulfill job requirements., • Ability to work collaboratively in a cross-functional team environment., • Detail-oriented with a strong commitment to accuracy., • Strong problem-solving skills and a continuous improvement mindset., • Proven experience in financial planning and analysis or related roles., • Familiarity with developmental disabilities., • An understanding of the philosophy of community-based and work programs., • Awareness of principles of normalization and development., • Effective writing skills and ability to chart data, to track participant progress and generate reports in an accurate and timely manner., • Ability to deal effectively with staff, participants, and outside community., • Must be able to read, write, speak, and interpret documents and instructions in English., • Must have experience working with computers.Apis Services, Inc. (a wholly owned subsidiary of Inperium, Inc.) provides a progressive platform for delivering Shared Services to Inperium and its Constellation of affiliate companies. Allowing these entities to advance their mission and vision. By exploring geographical program expansion and focusing on quality outcome measures to create cost savings that result in reinvestment into the organizations stakeholders through capacity creation and employee compensation betterment. Apis Services, Inc. and affiliate’s provide equal employment opportunities for all employees and applicants for employment in compliance with all federal and all applicable state and local laws and regulations, including nondiscrimination in hiring and employment. All employment decisions are made without regard to race, color, religion, gender, national origin, ancestry, age, sexual orientation, gender identity and expression, disability, genetic information, marital status, pregnancy/childbirth, veteran status or any other basis protected by law. This policy of non-discrimination and equal employment opportunities extends to every phase and aspect of hiring and employment.

Job Description Pay: $80,000.00 - $120,000.00 per year Job description: Relocation is welcomed and relocation packages are available. Note: This position requires employees to be on-site five days a week at either the Raleigh, NC or Charlotte, NC office. Schedule: Four 9-hour workdays and a half-day on Fridays. Note: The qualified candidate for this position must have at least 3 years of roadway design experience and working knowledge of NCDOT Guidelines and the FHWA Roadway Design Manual. About Our Client Our client is a well-established, employee-owned, woman-owned engineering firm founded in 1993. Headquartered in Raleigh, NC, with offices in multiple locations, the company has earned recognition as one of the top engineering firms in the Southeast and is a certified HUB business. They provide high-quality services in transportation, roadway design, structural engineering, and more. Job Description • Design and develop roadway projects including intersections, arterials, expressways, interstates, and interchanges, • Assist with project scopes, budgets, schedules, and client communications, • Work closely with project managers to maintain client needs and expectations, • Mentor junior engineers, designers, and drafters in roadway design processes, • Collaborate with multidisciplinary teams, sub-consultants, and permitting agencies, • Prepare roadway design plans in compliance with NCDOT and FHWA standards, • Use MicroStation, GeoPak, OpenRoads, or similar design tools for plan development, • Bachelors degree in civil engineering or related field, • Minimum of 3 years of roadway design experience, • Working knowledge of NCDOT Guidelines for Highway Design and FHWA Roadway Design Manual, • Proficiency with roadway design software (MicroStation, GeoPak, OpenRoads preferred), • Strong communication skills with ability to interact effectively with clients and teams, • Experience working in a multi-disciplinary engineering environment, • Must be detail-oriented, organized, and able to meet deadlines without close supervision, • Join a highly ranked and recognized engineering firm with over 30 years of success, • Work on impactful transportation projects across North Carolina and beyond, • Growth opportunities with mentorship and professional development support, • Relocation assistance available for qualified candidates Job Type: Full-time Benefits: • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Relocation assistance, • Retirement plan, • Vision insurance

Job DescriptionDescription: As a regional construction management company, we don’t just build buildings; we also build communities and, most importantly, PEOPLE. While we continue to grow in size and expertise, our foundational values of quality, dependability, and integrity have remained steadfast as the cornerstones of our business. Southway is a people-focused organization – we know our success is dependent on the people we hire and the teams we create. One way we demonstrate this commitment is through our recruiting process. We believe it’s important to learn about the whole person – their personality, motivators, job-related behaviors, etc. – not just technical abilities. A standardized assessment, known as the CMA Assessment, is part of our recruiting process. This step helps us to understand the unique value each person brings to our team at Southway. Our passion for construction, coupled with our collaborative team-oriented approach, sets us apart in attracting and retaining clients. The solid reputation we have built affords us continued growth, allowing us to offer a dynamic work environment that attracts new team members who are seeking opportunities for personal development and career growth. We offer on-the-job learning and mentoring through a diverse portfolio of challenging projects, including adaptive reuse, historic preservation, renovations, and new construction. If you share our values of quality, dependability, and integrity, and you are humble, hungry, and smart, come join us under the Southway Tent! Southway Builders is actively recruiting a Construction Superintendent in North Carolina (Raleigh/Triangle/Lexington regions) to successfully oversee project planning, scheduling, budgeting, and implementation. POSITION SCOPE: Coordinates and manages all on-site project activities, while working with the project team including Project Managers, Project Engineers, Assistant Superintendents, field personnel and subcontractors. Successfully delivers projects following all safety protocols, with the desired level of quality, on time and on budget. Management of Assistant Superintendent’s, including growth & development. ESSENTIAL DUTIES: • Makes informed decisions regarding the project budget to recoup and/or accelerate the overall project schedule., • Manages expectations and processes for BGE, Comcast, etc., serving as an asset to the owner., • Proactively develops recovery schedules, as needed with Project Manager., • Proactively develops and manages relationships with city inspectors., • Creates and manages quality control, site specific and general, checklists., • Manages Assistant Superintendents and Project Engineers, including participation in annual performance reviews and mentorship., • Prepares and maintains subcontractor meeting minutes in project management database and train assistant superintendents on this task., • Prepares and coordinates 3rd party inspections – trade, testing, ADA, Green, etc., • Demonstrates active engagement with the owner and design team, through regular correspondence., • Reviews and annotates submittals, shop drawings and subcontractor tickets as defined with the Project Manager., • Manages the punch list., • Performs quantity takeoffs (verification, order confirmation, etc.) as needed., • Actively updates the master schedule with the Project Manager., • Actively participates, and prepares progress updates and hurdles, for all owner meetings., • Partners with the Project Manager in the creation of subcontractor Attachment A scopes., • Partners with the Project Manager in the scope reviews., • Partners with the Project Manager in the creation and management of the master CPM (Critical Path Method) schedule., • Participates in team assessments and personnel reviews as requested., • Initiates notices to subcontractors regarding safety, delays, back charges, etc., • Initiates Request for Information (RFIs) to any applicable parties., • Prepares accident and incident reports as needed., • Prepares and maintains a three-week look ahead and works with the Project Manager to ensure it is consistent with the CPM schedule., • Maintains daily project photo records, including album creation and labeling., • Leads zero-tolerance safety policy and removes violators from site., • Leads safety orientation and logs attendees., • Leads safety inspections; assists 3rd party safety inspectors., • Creates trade specific quality control checklists., • Adheres to the Company’s key values of quality, dependability, and integrity., • Other duties as assigned. Requirements: PREREQUISITE KNOWLEDGE, SKILLS, AND ABILITIES: • Undergraduate degree construction management or engineering, preferred., • Demonstrates above average competencies of Level 1 Superintendent or higher., • 3+ years of Construction Superintendent experience., • 4+ years of leadership experience., • Experience working on projects of $15M+., • Proficient technical competency in different types/scales/complexities of construction., • Proficient in Procore and Microsoft Office Suite to include MS Project., • In-depth understanding of clauses/articles of boiler plate subcontractor agreements, including Attachment A’s., • In-depth understanding of all building/Authority Having Jurisdiction A(HJ) inspection requirements., • Ability to successfully lead an OSHA inspection., • Advanced knowledge in the comprehension and construct of blueprints specifications and contract documents., • Ability to independently and successfully complete quality control lists and checks for all trades., • Advanced construction knowledge, including means and methods., • Able to properly assess the percentage of work complete for clients and lenders., • Excellent oral and written communication skills., • Ability to address conflict in a timely and professional manner., • Ability to multi-task., • Strong attention to detail., • Excellent proofreading skills., • Drive to make proactive decisions., • Thrives in a team environment., • Ability to function in high-pressure situations., • Manual dexterity to operate a computer., • Correctable vision and hearing., • Excellent interpersonal skills., • Clear, easy to understand oral communication ability., • Ability to lift 50 pounds for moving equipment on and off shelves., • Ability to stand and walk for prolonged periods., • Must be able to traverse and inspect all areas of jobsite in all types of weather; this may include walking, climbing, reaching, bending, crawling, or stretching., • May require travel beyond a typical one-hour job site commute., • Exposure to characteristic construction site dangers., • HUMBLE, HUNGRY and SMART, • Superior oral and written communication skills., • Conflict resolution – addresses challenges in real time, fair treatment amongst all project stakeholders, while maintaining Southway’s contractual position., • Confidence to influence others., • Professional demeanor and engagement., • Sound judgement in decision making., • Displays discernment in day-to-day activity., • Three-week schedule tasks are in line with the master schedule, complete and accurate 90% of the time., • Three-week schedule tasks are achieved by subcontractors 90% of the time., • Pre-install conferences with at least 90% of the subcontractors have been completed and confirmed, with detailed notes, three weeks prior to the scheduled start date., • Site safety inspections are performed weekly by the Superintendent or designee., • Track Corrective Action lag time observation till abatement., • Track Incidents., • Perform at least one Quality Control Observation every day to ensure work is consistent with the contract document., • Perform weekly Procore Quality Inspections., • All non-conformances are resolved within 72 hours of being identified. In the event the procurement of materials or correction duration requirement exceeds 72-hours, a correction plan is defined within 72-hours., • Owner Punchlist is less than 5 items per designated area and established at kick-off meeting., • Books and/or podcasts – one (1) book or four (4) podcasts from SBI library (or approved by manager) each year., • Annual salary range: $90,000 - $165,000 based on qualifications and experience., • Comprehensive medical, dental, and vision insurance with employer paid plan., • 401K plan with employer match., • Paid time off and paid holidays., • This position may be eligible for a discretionary bonus and auto allowance.

Job Description APPLY NOW TO TAKE ADVANTAGE OF OUR $1500 SIGN ON BONUS! At Horizon Services, we pride ourselves in creating an excellent working environment by hiring the best technicians, training them better than anyone else, and creating an environment where our technicians are our number one priority. Reasons you'll love working here: • Along with our industry leading pay and incentive programs, we also provide flexible schedules to match YOUR lifestyle and NO ON-CALL or MANDATORY WEEKENDS. Overtime available on a volunteer basis. YEAR ROUND WORK. The following are just a few examples of schedules we are looking to hire for TODAY:, • Alternating 5/4 with three-day weekends;, • Mon-Fri 8-6;, • Tue-Sat 8-6,, • Sun-Thu 8-6;, • we also offer FOUR 10-hour shifts with three days off., • These are just examples - we will customize your shift with YOU!, • Paid Time Off Minimum two weeks after ninety days (We MATCH your current PTO balance if greater than two weeks), • Full uniforms along with winter coats, spring jackets, t-shirts, sweatshirts, and hats, • Our warehouse DELIVERS everything needed to complete you install to the job! No need to pick up equipment from the warehouse or supplier, or dispose of trash. That's all taken care of by our warehouse team. Go directly to the job in the morning!, • Cooler of Gatorade and protein bars delivered to your job by the warehouse team, • On-site support and training from our field supervisor team, • Company-supplied tools, • Bonus incentives, • Fully stocked warehouse with parts runners operating 7 days a week, • New, clean, fully-stocked truck, • Training & Development Programs: sheet metal class, boiler training, electrical training, zoning training, oil training, and more., • Career Advancement Opportunities - we pride ourselves in promoting from within the organization and we're committed to helping you grow into a leadership position, if that's a path you're interested in, • Full Benefits Package with a 401k, • Company-issued phone and i-Pad = no paperwork, • Shop is stocked with water, Gatorade, coffee, and snacks Job Posted by ApplicantPro

Description UNC Health / North Carolina Pain Management seeks an experienced Pain Management Physician employed through UNC Health Rex. North Carolina Pain Management is a part of The North Carolina Neuroscience and Spine Center. The North Carolina Neuroscience & Spine Center provides specialized care for individuals with back pain, tailoring treatment solutions to suit each patient's unique needs. Our dedicated team prioritizes a conservative approach, refraining from rushing into surgical recommendations. We are committed to exploring all available avenues of treatment, collaborating with a range of experts (including pain management specialists, physical therapists, and neurosurgeons to devise a comprehensive care strategy that delivers optimal outcomes. Job Responsibilities -Discuss medical history with patients to acquire knowledge of healthcare practices. -Conduct comprehensive patient assessments to diagnose pain conditions. -Create and discuss a pain management treatment plan with patients. -Treat patients by employing interventional techniques such as injections and/or other devices. -Prescribe medications, if applicable. Required Skills and Qualifications -Strong knowledge of pain mechanisms and pharmacology. -Proficient in interventional pain procedures, joint injections, nerve blocks, and epidural injections. -Working knowledge of medical equipment such as C-Arm. -Effective analytical and problem-solving skills. -Excellent communication and interpersonal skills. -Ability to work effectively in a multidisciplinary care team in a clinic setting. -Strong organizational and time management skills. -Patience, compassion, and the ability to empathize with patients in pain. -Passionate about pain management and dedicated to providing high-quality and safe patient care. Education & Experience Requirements -A medical degree from an accredited institution. -Valid state medical license. -Board certification in Pain Management. -Dual board certification - Pain Management and Anesthesia(preferred) -Experience with a wide range of pain management practices. List of procedures -Caudal Steroid Injection -Cervical Epidural Steroid Injection -Cervical Radiofrequency Ablation -Electromyography (EMG) -Facet Joint Injections -Kyphoplasty -Lumbar Epidural Steroid Injections -Lumbar Radiofrequency Ablation -Lumbar Sympathetic Block -Lumbar Transforaminal Epidural Steroid Injection -Medial Branch Block -Opioid Therapy -Sacroiliac Joint Steroid Injections -Spinal Cord Stimulator -Trigger Point Injections About the Community Raleigh, Wake County, is a dynamic and thriving city that seamlessly blends modern innovation with Southern charm. This vibrant city offers residents an enticing urban-suburban mix, providing the best of both worlds. Raleigh boasts a diverse and rapidly growing economy, with a strong presence in technology, biotech, and the medical industry. The addition of the $552 million Apple campus in Research Triangle Park further solidifies Raleigh's status as a hub for innovation and high-tech industries. Nestled centrally, Raleigh allows its residents the luxury of easy access to the picturesque mountains or the serene beaches, both just a few hours away. The city experiences all four seasons, creating an appealing environment for those who appreciate diverse climates. Raleigh's cultural scene is enriched by beautiful green spaces, family-friendly museums, and a burgeoning art and music community. Monthly gallery walks, summer concerts, and music festivals contribute to the city's lively atmosphere, offering entertainment for every taste. The Wake County Public School System consistently earns high marks across the board, outperforming school districts across the state and nation in end-of-course and proficiency tests, SAT scores, and various performance measuring criteria. In addition to its economic and educational prowess, Raleigh offers a welcoming and inclusive community, making it an ideal place for individuals and families alike. Recruiter: Jeni Higgins, Other Information Education Requirements: Graduation from an accredited school of medicine. Licensure/Certification Requirements: Board Certified Pain Management & Anesthesia (preferred) DEA;ACLS;MD Knowledge/Skills/and Abilities Requirements: Language Skills: Should be able to communicate proficiently in English. REASONING ABILITY High-level quantitative and qualitative reason skills are essential in order to diagnosis medical and clinical issues presented by patients. CERTIFICATES, LICENSES, REGISTRATIONS North Carolina Medical License, DEA License, BLS/ACLS certification preferred. Board certified in Pain Management and Anesthesia (preferred) PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, use hands to finger, handle, or feel and talk or hear. the employee is occasionally required to stand, walk, kneel, bend and reach with hands and arms. Specific vision abilities required by this job include close vision. Ability to lift up to 25 pounds required. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physician generally works in a medical office setting. The noise level in the work environment is usually moderate. Reasoning Ability: High-level quantitative and qualitative reason skills are essential in order to diagnosis medical and clinical issues presented by patients. Job Details Legal Employer: NCHEALTH Entity: UNC REX Healthcare Organization Unit: Rex Pain Clinic Work Type: Full Time Standard Hours Per Week: 40.00 Work Schedule: Day Job Location of Job: US:NC:Raleigh Exempt From Overtime: Exempt: Yes Qualified applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. UNC Health makes reasonable accommodations for applicants' and employees' religious practices and beliefs, as well as applicants and employees with disabilities. All interested applicants are invited to apply for career opportunities. Please email if you need a reasonable accommodation to search and/or to apply for a career opportunity.

U.S. Customs and Border Protection (CBP) offers those interested in a career in law enforcement an exceptional opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America. You will be part of the Department of Homeland Security workforce, protecting American interests and securing our nation. If you are looking for a rewarding career with great pay, benefits, and job stability, now is the time to make your move. As a Customs and Border Protection Officer (CBPO), you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nations economic prosperity. Being a CBPO makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession. Typical assignments include: • Enforcing customs, immigration, and agriculture laws and regulations., • Facilitating the flow of legitimate trade and travel., • Conducting inspections of individuals and conveyances., • Determining the admissibility of individuals for entry into the United States. You will be asked to provide your preference for one of the following mission-critical locations: (list truncated for brevity include full list in production) The preference locations listed above are expected to have vacancies available in the future; however, if the duty locations do not have vacancies at the time of your final offer, you may be offered a duty location in another geographic location within the United States. Salary and Duty Location Recruitment Incentives and Benefits Annual Base Salary for newly appointed CBPOs varies as follows: GS-9: $61,111 - $124,443 per year Note: A fully trained CBPO is eligible for up to $45,000 in overtime pay in addition to the starting salary. Officers are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, generous annual and sick leave, and participation in the Thrift Savings Plan. LOCATION INCENTIVES: If you accept one of the duty locations listed below, you may be eligible to receive an additional 15%-25% of your salary each year for the first three (3) years of employment in addition to any overtime pay. Some locations may offer 25% for four (4) years. Duty locations offering 25% recruitment incentives: Otay Mesa, San Francisco, San Ysidro, and Tecate, CA; Key West, FL; etc. Duty locations offering 15% recruitment incentives: Honolulu, HI; Portal, ND; etc. Duty location offering 10% recruitment incentives: Calexico, CA Qualifications: You qualify for the GS-9 grade level in one of the following ways: experience, education, or a combination of both. Experience: A minimum of one (1) year of specialized experience equivalent to at least the next lower grade level that includes: • Detaining suspected violators of federal, state, or local laws and/or arresting violators using the proper law enforcement methods., • Enforcing laws and regulations relating to importing, exporting, and/or international shipping., • Utilizing intelligence techniques and behavior analysis to identify potential threats. Combination of Experience and Education: A combination of specialized experience AND successfully completed graduate-level education. Other Requirements: • Citizenship: Must be a U.S. Citizen., • Residency: Primary U.S. residency for at least three of the last five years., • Age Restriction: Must be referred before your 40th birthday (some exceptions apply). How to Apply: Click the Apply button on this site. Youll be directed to the CBP Talent Network page. Select Customs and Border Protection Officer as your Position of Interest. Youll receive a link to the official job posting on USAJOBS to complete your application. Be sure to follow all instructions. As a subscriber to the CBP Talent Network, youll receive monthly emails with updates and opportunities.

U.S. Customs and Border Protection (CBP) offers those interested in a career in law enforcement an exceptional opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America. You will be part of the Department of Homeland Security workforce, protecting American interests and securing our nation. If you are looking for a rewarding career with great pay, benefits, and job stability, now is the time to make your move. As a Customs and Border Protection Officer (CBPO), you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nations economic prosperity. Being a CBPO makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession. Typical assignments include: • Enforcing customs, immigration, and agriculture laws and regulations., • Facilitating the flow of legitimate trade and travel., • Conducting inspections of individuals and conveyances., • Determining the admissibility of individuals for entry into the United States. You will be asked to provide your preference for one of the following mission-critical locations: (list truncated for brevity include full list in production) The preference locations listed above are expected to have vacancies available in the future; however, if the duty locations do not have vacancies at the time of your final offer, you may be offered a duty location in another geographic location within the United States. Salary and Duty Location Recruitment Incentives and Benefits Annual Base Salary for newly appointed CBPOs varies as follows: GS-9: $61,111 - $124,443 per year Note: A fully trained CBPO is eligible for up to $45,000 in overtime pay in addition to the starting salary. Officers are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, generous annual and sick leave, and participation in the Thrift Savings Plan. LOCATION INCENTIVES: If you accept one of the duty locations listed below, you may be eligible to receive an additional 15%-25% of your salary each year for the first three (3) years of employment in addition to any overtime pay. Some locations may offer 25% for four (4) years. Duty locations offering 25% recruitment incentives: Otay Mesa, San Francisco, San Ysidro, and Tecate, CA; Key West, FL; etc. Duty locations offering 15% recruitment incentives: Honolulu, HI; Portal, ND; etc. Duty location offering 10% recruitment incentives: Calexico, CA Qualifications: You qualify for the GS-9 grade level in one of the following ways: experience, education, or a combination of both. Experience: A minimum of one (1) year of specialized experience equivalent to at least the next lower grade level that includes: • Detaining suspected violators of federal, state, or local laws and/or arresting violators using the proper law enforcement methods., • Enforcing laws and regulations relating to importing, exporting, and/or international shipping., • Utilizing intelligence techniques and behavior analysis to identify potential threats. Combination of Experience and Education: A combination of specialized experience AND successfully completed graduate-level education. Other Requirements: • Citizenship: Must be a U.S. Citizen., • Residency: Primary U.S. residency for at least three of the last five years., • Age Restriction: Must be referred before your 40th birthday (some exceptions apply). How to Apply: Click the Apply button on this site. Youll be directed to the CBP Talent Network page. Select Customs and Border Protection Officer as your Position of Interest. Youll receive a link to the official job posting on USAJOBS to complete your application. Be sure to follow all instructions. As a subscriber to the CBP Talent Network, youll receive monthly emails with updates and opportunities.

Job Description Crew member ($9-12/hour) Job details From $9 an hour plus tips Full-time/Part-time Number of hires for this role 10+ Full Job Description Tired of working in a hot kitchen! Come to Poké Bar, we love what we do, and we try to make every day as fulfilling as the last. Our restaurants need team members to make the magic happen every day. Now hiring front and back house members. We foster a culture built on four core values: • Quality- providing the best food, drink and service every time., • Integrity- Being truthful, sincere, and upfront with everyone you interact with., • Teamwork- Less me, more we. Individual efforts contribute to the team’s success, but the team won’t reach its goal unless everyone works together. Poké Bar offers all team members a clear career path that includes continuous training and development. We are committed to creating leaders in our restaurants by providing you the tools and mentorship to help you find continued success with us as a shift lead, experience manager, and beyond! What You’ll Do: • Put the customer first - Consistently create great Poké Bar experiences by creating a fun and energetic environment., • Achieve results - Take ownership of your station throughout every shift., • Foster collaboration - Work with others to find success as a group through communication and participation., • Must be able to bend and reach overhead often, • Must possess dexterity to handle tongs, pots/pans, and other equipment, • Must be comfortable working in temperatures ranging from hot to cold, • May be required to work in tight spaces, • Must maintain near constant communication with multiple people, • Constant visualization and communication while working, • Must be able to sit, squat and kneel occasionally, • Must be able to work in a safe and fast paced manner We’ve got you covered. Here are just some of the benefits available to Poké Bar crew members: • FREE Poké Bar meal for every shift worked*, • The opportunity to be on the ground floor of a rapidly growing brand, • Week paid vacation after one year of employment, • No late nights or early mornings, • Five day work week, • Competitive salary based on experience, • Paid training, • Closed Thanksgiving and Christmas Day, • Tips!!!! *for qualifying shifts As an equal opportunity employer, Reise & Eats LLC DBA Poké Bar considers applicants for all positions without regard to race, color, sex, religion, national origin, disability, age, height, weight, marital status, sexual orientation, familial status, genetic information or any other characteristic or protected classes as defined by federal, state, or local law.

Job Description Job Description Jersey Mike's Subs has been making amazing subs since 1956 in Point Pleasant New Jersey! The Jersey Mikes tradition was founded on a strong sense of community and commitment to the personal and professional development of our people. Our goal is to serve the highest quality sub sandwich to our customer in a manner that projects a thankful and caring mentality to every person that comes through our door. Our culture is a culture of "giving" and supporting our local communities so that all can be lifted together. "Jersey Mike's "A Sub Above" Jersey Mikes is committed to providing our customers with the most enjoyable and satisfying experience possible through our amazing subs and unparalleled customer service. We understand that it all starts with a winning team of individuals who are fun, personable,diligent, positive, energetic, eager to learn team players who take pride in what they do and who they are. At the end of the day they are focused on executing great customer service with a Great Big Smile! If you possess these attributes and can commit to improving upon them, we would love to speak with you about joining our team! A Shift Leader is responsible for supporting the management team in the execution of running their assigned location. This includes, but is not limited to: 1. Coaching the staff to deliver amazing customer service;, 2. Producing high quality food;, 3. Delivering the Jersey Mike’s experience;, 4. Cash handling;, 5. Following the Learning Management System Training Program;, 6. Developing others for career growth;, 7. Enforcing policies and procedures;, 8. Participating in local and national marketing initiatives;, 9. Building sales;, 10. Maintaining the cleanliness and proper sanitation practices in the establishment;, 11. Being certified in all four positions of the restaurant;, 12. Effective communication;, 13. Having a sense of urgency; A Shift Leader is expected to: 1. Move or Transport up to 50 lbs without assistance unless a medical notation is made whereas any physical disabilities are covered by the Americans with Disabilities Act or a temporary doctor's note with a time frame for the restriction on your ability;, 2. Work 38-40 hours per week;, 3. Have the ability to get to and from work;, 4. Communicate with the GM/AGM/DM of any issues they are having;, 5. Lead by example in terms of quality of the food they make, the way they interact and provide customer service, and coming to work in a clean, fitted, and pressed uniform daily. Create food consistent with Jersey Mikes high quality standards • Maintain restaurant that is noticeably cleaner than others, • Work in a fast-paced team driven atmosphere, • Ability to multitask and work with a sense of urgency, • Interface with customers and provide an exceptional experience, • Full understanding of the term’s accountability and integrity, • Key Holder, • Perform all tasks related to opening and closing of store, • Knows how to bake bread and perform all prep, • Manage and lead crew of 2 to 5 people, • Proficient in slicing Qualifications for the job: • Education: High school degree or equivalent, • 1 Year QSR experience preferred, • Other: Must be 18 years or older to operate the slicer, • Serve Safe Certification - Food Handler, • Must have reliable transportation This website is not operated by Jersey Mike’s Franchise Systems. Jersey Mike’s restaurants are independently owned and operated franchise locations. Franchisees are independent business owners who set their own wage and benefit programs, which can vary between franchisees. Your application will go directly to the franchisee, and all hiring decisions will be made by the franchisee.

Job Description:\n\nHi 👋🏾 I’m Abhik, Ashby's Co-Founder and VP of Engineering. We’re looking for a versatile, persistent product engineer who’s not afraid to set up reusable building blocks across the stack and advocate for the time and space to do so. At Ashby, all our engineers ship features end-to-end at a high pace. Example is the best leadership. We’ll give you the room to do your best work, and you'll be our guide! If that speaks to you, read on. What Ashby gives you in return is the best of both early and growth-stage environments. The agency and no-nonsense of a seed startup: you write product specs, make product and design decisions, and build in an almost-no-meeting culture. While also the product-market fit and scale of a growth-stage startup: tens of thousands of daily users who depend on your software and eagerly await your next feature. We have notable customers like Notion, Linear, Shopify, and Snowflake. Our growth and retention metrics are best-in-class among our peers: we have tens of millions in ARR, growing >100% year over year, very low churn, and many years of runway. We’ll share more details once we meet. You’ve probably seen this role posted before, and it’s because we’re always expanding the team (we’re on track to double this year). We’re bubbling with ideas on how to support Talent Acquisition through software, and we’ve started the journey of building products beyond Talent Acquisition. We read every application and aim to respond to yours within 3-4 days (often sooner). About the Role and How We Work Our engineering culture strives to recreate the environments where we did our best work as ICs – where we had the ownership and agency to impact our users with creative and innovative software. I started my career building software for artists in the Visual Effects industry. It was a formative experience for me as a software engineer because success relied on my ability to be a product manager and designer. I talked to artists to understand their needs. I came up with ideas. I did industry research, designed interfaces, and prototyped ideas. I watched artists use what I built and decided what to tackle in the next iteration. No daily stand-ups, no t-shirt sizing, no planning meetings. I studied computer science to solve problems, not tickets, and this felt exactly like that. I not only felt creative and fulfilled but the agency and ownership we were given as engineers powered an incredible amount of innovation. Innovation came differently (or not at all) at technology startups beyond the seed stage, often through an engineer’s force of will and ability to push back against culture (rather than any encouragement from it). Engineering was narrowed to implementation and delivery, partly due to the influence of other departments and partly due to the influx of "Agile" processes like sprint planning. In those companies, I felt like a JIRA jockey. At Ashby, we’re building an environment that is optimistic about what engineers can own and achieve. An environment that embraces innovative engineers, and, frankly, often stays out of their way. As a Product Engineer, you’ll take ownership over a large portion of one of our products and own projects end-to-end (wearing hats traditionally worn by product and design). You’ll research competitors, write product specs, make wireframes, and more. To ground it with examples, product engineers at Ashby have: Designed and built automated interview scheduling. This feature automates scheduling by calculating possible times from a pool of interviewers and other constraints, and then presenting these times to the candidate for selection via our responsive web app. This solves the “Calendar Tetris” problem I talk about in "What We're Building." Built a generalized declarative filter architecture that allows users to create complex filters for any record with a consistent UI and compile it to SQL in our backend. Many user-facing features use it. Specced, designed, and implemented a feature that allows users to complete signing offers entirely within Ashby. This project involved talking to customers to understand their requirements, deciding what technologies to use, building a prototype, and working with other team members to integrate the final implementation into additional features. What We’re Building As engineers, we are used to tooling that makes us better at what we do. When we started Ashby, we saw the opposite with Talent Acquisition software. Recruiting teams were leveling up how they did their work, but instead of software meeting this new standard, it held them back. Scheduling a final round is an excellent example. Recruiting teams wanted to schedule candidates faster, track interviewer preparation and quality, and do it with half the headcount. A recruiter needed to manually collect availability from the candidate, identify qualified interviewers, perform “Calendar Tetris” to find who is available to interview the candidate, schedule on the earliest date possible, and make any last-minute adjustments as availability changed. They must do this while considering the interview load on each individual and whether interviewers need to be trained and shadowing others. 🥵 TA software didn’t help. As hiring managers, we know TA is a critical function, and as engineers, we know software can do better. So, we built and continue to build Ashby to give TA teams the highest standard of tooling. Software that’s intelligent and powerful. Software that provides insights into where they’re failing and automates or simplifies many of the tasks they’re underwater with. We want other functions and departments to be jealous of what TA teams can do with Ashby, and today they often are! Why You Should or Shouldn’t Apply Software engineers come in many flavors, not all of which fit our model. Here are some things to help you decide if this fits you and what you’re looking for: You’re not afraid to tackle any part of a technology stack. You do what’s necessary to successfully deliver a feature, whether writing frontend or choosing new infrastructure. We’ll provide a supportive environment to do it successfully (e.g., design system, SRE team). You’ve tackled projects with a lot of product and technical ambiguity, and you thrive at the intersection of the two. We’re not building a simple CRUD app, and many of the challenges we tackle require you to use your knowledge of our customers to build powerful abstractions and flexibility in the system to solve a class of problems. You know how to strike the right balance between speed and quality. Ashby wasn’t built quickly. We took four years to launch publicly because convincing customers to switch required a high-quality product. However, time isn’t infinite, especially for a startup, so we still move with urgency—we’ve built the equivalent of three or more VC-backed startups with a very small team. You are ambitious and always looking to improve your skills. For most engineers, this role will give you more freedom and responsibilities than you’ve experienced in the past. To thrive (and level up), you’ll need to be open to feedback (and we give lots of it). You’re an excellent collaborator and communicator. Ownership and freedom don’t mean you work in a vacuum. You’ll need to vet your decisions with the appropriate stakeholders, keep them up to date when necessary, and work with other engineers to get your projects across the finish line. Clear and concise communication helps a lot here! You seek to create leverage in your work. The nature of software is that you can often automate or abstract what would be tedious, time-consuming work. Your impatience usually leads to new abstractions, tools to allow Support to debug before Engineering, new lint rules to prevent common bugs, etc. Put another way, you shouldn’t apply if: To you, a tech lead, staff, or principal engineer is someone who spends most of their time project managing or doing architecture reviews. Our most tenured engineers spend most of their time building, and we often trust them with our most challenging problems. While they lead product and technical areas and help other engineers plan their most challenging work, it’s not a requirement, nor do engineers need their sign-off. You need company-driven process and structure to get your projects across the finish line. Sprint planning and well-defined project management processes are things you need or look to others to lead. You’d rather focus on the technical details and challenges. You only want to do exciting work. We’re building a team of kind, collaborative folks. Customer issues and investigations are distributed across the team, including our high-level ICs. You can get lost in the details. Once you start implementation, it can be hard to take a step back and think about the project as a whole. You like everything to be planned upfront. You haven’t led or taken ownership of projects before. You’re used to working with tech leads and taking on tasks distributed by them. You want to mentor earlier-career engineers. We rely on engineers owning their projects, so we need engineers with that experience. This requires the team to be reasonably tenured. More than 90% of the team would be considered Senior or above in the industry today, so mentorship opportunities are very limited. Engineering Culture Our engineering culture is motivated by Benji’s (my Co-founder and CEO) and my belief that a small, talented team, given the right environment, can build high-quality software fast (and work regular hours!). We do it through: Minimal process with ownership over decisions normally made by product and design Natural collaboration and deliberate communication Investing in tools and abstractions that give us leverage Putting effort into building a diverse team Minimal Process & Lots of Ownership The best engineers we’ve worked with delivered reliably magical outcomes. They took customer problems and relentlessly drove them to solutions that were not only successful but often brilliant and creative. While they did this with minimal oversight, stakeholders were never in the dark as to what was going on, and no setback was a surprise. Traditional product-development processes aren’t meant for the best engineers. Their purpose is to create consistent outcomes regardless of the engineer’s skill. But, consistency comes at the expense of an engineer’s time and freedom—both ingredients necessary to generate those magical outcomes. As a result, process stifles the best engineers and doesn’t give others the opportunity to practice the behaviors that made the best engineers the “best.” At Ashby, we want to build an environment that encourages every engineer to be their best. So, at Ashby, every Engineer runs their project. Product Managers (and Designers) build strategy, do customer research, and hand off problem briefs to Engineers. Engineers take on the rest: they research the problem, write product specs, build wireframes, and implement their solution end-to-end. We rely on engineers, not process, to push information outward to the relevant folks (e.g., Product Managers) and pull folks in to help (e.g., Designers, Infra). It’s a new level of ownership for many engineers, but we’d rather an engineer fail a bit and coach up their skills than use process as a crutch. Not everyone succeeds in our culture, but those who do thrive. Collaboration is Natural & Communication is Deliberate Our engineering team consists of lifelong learners who are talented but also humble and kind (meet them here!). These attributes create an environment where collaboration happens naturally. We combine this with research, prototyping, and written proposals to see around corners and get feedback from the team across time zones. Focus time is something that we hold sacred, and, with thoughtful and deliberate communication, engineers are in <2h meetings per week (I wrote about it here). To drive it home, here's a recent calendar of an engineer who has been with us for over 4 years: We also meet in person at least twice a year, once as a department and once as a company. You also have a small budget to meet up with folks in your city/region. Increase Leverage, not Team Size We built Ashby with the quality, breadth, and depth that many customers would expect from much larger teams over larger time scales. We’ve done this through investment in: Great developer tooling. Our CI/CD takes ~10m, and we deploy at least 15x a day. A debugger that works out of the box. Everyone on the team has contributed to our developer experience 💪🏾. Building blocks to create powerful and customizable products fast. At the core of Ashby is a set of common components (analytics modeling and query language, policy engine, workflow engine, design system) that we constantly improve. Each improvement to a common component cascades throughout our app (short video below). Here’s an impromptu quote from Arjun in our company Slack of what it’s like to build a feature at Ashby: And a demo of one of these building blocks: Put Effort into Diversity Diverse teams drive innovation and better outcomes. Having seen my mother and partner build their careers as minority women in non-diverse fields, I want to make sure Ashby creates opportunities for the next generation of engineers from underrepresented groups. Today, 21% of engineers at Ashby are from underrepresented groups. It’s not great, and we are taking conscious steps to improve, like sourcing diverse candidates, providing generous paid family leave, no leetcode interviews, and more. Interview Process At Ashby, our team and interview process want to help you show your best self. We’ll dive into past projects and simulate working together via pair programming, writing product and tech specs collaboratively, and talking through decisions. There are no leetcode or whiteboard exercises. Our interview process is three rounds: Introduction call with Hiring Manager (15 to 30m, live) A technical screen where we pair in our actual codebase (1h, live) Three non-coding interviews that focus on product thinking, technical design, and infrastructure (3h 15m, live can be split across multiple days) Depending on our leadership team’s bandwidth, we may start with an additional 30m screen with a recruiter. Your hiring manager will be your main point of contact and prep you for interviews. Each round will have written guidance so you know what to expect (you’ll need minimal preparation). You’ll meet 4 to 6 people in engineering (with 5-15 minutes in each interview to ask them questions). If we don’t give an offer, we’ll provide feedback! Your First Three Months at Ashby We want an exceptional onboarding experience for every new hire. At Ashby, your dev environment is set up with a single script, you push your first product change on day one, and you spend the rest of your time shipping product changes that give you a tour of our codebase and best practices.

Job Description Job Location: Morrisville, NC 27560 Job Type: Full-time Expected hours: 40 – 50 per week Schedule: • 12 hour shift, • Day shift, • Holidays, • Night shift, • On call, • Overtime The ACT Renewables Control Center (The ARCC) is our organization's central nervous system and is responsible for back office technical support, remote operations, and process administration. The Control Center Operator/Engineer will perform monitoring and control, remote investigations, performance analysis, and provide technical support to our field technicians and operators. This is a critical position in our organization and will interface with a wide variety of stakeholders both within and external to the organization. This will also be an opportunity to get involved on the ground floor of our organization and help us shape everything from our policies to our corporate culture. Responsibilities • Develop procedures and tools necessary for the efficient operation of a diverse fleet of solar and storage facilities, • Both real-time and long-term monitoring the operation and performance of solar and/or storage projects through remote DAS and SCADA systems., • Respond to system alarms and abnormal facility conditions by taking remote actions or alerting responsible parties, • Provide a central point of contact and support for plant managers, field operators, utilities, and external clients regarding performance, control, and maintenance schedules., • Site performance reporting to internal and external stakeholders., • Bachelors or Masters in technical field of study such as engineering, technology, or physics. An Associate degree with professional training or certifications may be considered in lieu of a four-year degree., • Working knowledge of science and theory of electrical systems, • Experience monitoring, troubleshooting, and/or operation in a power generation facility or other industrial facilities, • Experience with electrical maintenance, including PV technology, DC systems, AC systems, and network communications and monitoring., • Experience with Distribution and Transmission System Operations preferably NERC System Operator Certified or equivalent., • Diagnostic capabilities to troubleshoot and correct a broad range of network or system issues, • Ability to read and understand electrical and mechanical diagrams, • Proficiency with MS Office suite, • Experience working with a computerized maintenance management and scheduling system, • Employees must be able to maintain unescorted access to NERC regulated facilities, • Control Center personnel must complete all ACT provided training requirements necessary for the safe and compliant remote operation of solar and storage facilities, • Work is to be primarily performed in an office environment. However, all personnel are expected to occasionally perform site visits for training and technical support., • 401(k) with employer match, • Health Insurance, • Dental Insurance, • Vision Insurance, • Flexible Spending Account, • Health Savings Account, • Short-term and Long-term disability, • Critical illness, • Paid Time Off, • Parental Leave, • Paid Holidays, • Employee assistance program, • Life insurance, • Opportunities for advancement, • Training and Development, • Legal and Identity Theft, • Company vehicle or stipend opportunities

Job Description:\n\nHi 👋🏾 I’m Abhik, Ashby's Co-Founder and VP of Engineering. We’re looking for a versatile, persistent product engineer who’s not afraid to set up reusable building blocks across the stack and advocate for the time and space to do so. At Ashby, all our engineers ship features end-to-end at a high pace. Example is the best leadership. We’ll give you the room to do your best work, and you'll be our guide! If that speaks to you, read on. What Ashby gives you in return is the best of both early and growth-stage environments. The agency and no-nonsense of a seed startup: you write product specs, make product and design decisions, and build in an almost-no-meeting culture. While also the product-market fit and scale of a growth-stage startup: tens of thousands of daily users who depend on your software and eagerly await your next feature. We have notable customers like Notion, Linear, Shopify, and Snowflake. Our growth and retention metrics are best-in-class among our peers: we have tens of millions in ARR, growing >100% year over year, very low churn, and many years of runway. We’ll share more details once we meet. You’ve probably seen this role posted before, and it’s because we’re always expanding the team (we’re on track to double this year). We’re bubbling with ideas on how to support Talent Acquisition through software, and we’ve started the journey of building products beyond Talent Acquisition. We read every application and aim to respond to yours within 3-4 days (often sooner). About the Role and How We Work Our engineering culture strives to recreate the environments where we did our best work as ICs – where we had the ownership and agency to impact our users with creative and innovative software. I started my career building software for artists in the Visual Effects industry. It was a formative experience for me as a software engineer because success relied on my ability to be a product manager and designer. I talked to artists to understand their needs. I came up with ideas. I did industry research, designed interfaces, and prototyped ideas. I watched artists use what I built and decided what to tackle in the next iteration. No daily stand-ups, no t-shirt sizing, no planning meetings. I studied computer science to solve problems, not tickets, and this felt exactly like that. I not only felt creative and fulfilled but the agency and ownership we were given as engineers powered an incredible amount of innovation. Innovation came differently (or not at all) at technology startups beyond the seed stage, often through an engineer’s force of will and ability to push back against culture (rather than any encouragement from it). Engineering was narrowed to implementation and delivery, partly due to the influence of other departments and partly due to the influx of "Agile" processes like sprint planning. In those companies, I felt like a JIRA jockey. At Ashby, we’re building an environment that is optimistic about what engineers can own and achieve. An environment that embraces innovative engineers, and, frankly, often stays out of their way. As a Product Engineer, you’ll take ownership over a large portion of one of our products and own projects end-to-end (wearing hats traditionally worn by product and design). You’ll research competitors, write product specs, make wireframes, and more. To ground it with examples, product engineers at Ashby have: Designed and built automated interview scheduling. This feature automates scheduling by calculating possible times from a pool of interviewers and other constraints, and then presenting these times to the candidate for selection via our responsive web app. This solves the “Calendar Tetris” problem I talk about in "What We're Building." Built a generalized declarative filter architecture that allows users to create complex filters for any record with a consistent UI and compile it to SQL in our backend. Many user-facing features use it. Specced, designed, and implemented a feature that allows users to complete signing offers entirely within Ashby. This project involved talking to customers to understand their requirements, deciding what technologies to use, building a prototype, and working with other team members to integrate the final implementation into additional features. What We’re Building As engineers, we are used to tooling that makes us better at what we do. When we started Ashby, we saw the opposite with Talent Acquisition software. Recruiting teams were leveling up how they did their work, but instead of software meeting this new standard, it held them back. Scheduling a final round is an excellent example. Recruiting teams wanted to schedule candidates faster, track interviewer preparation and quality, and do it with half the headcount. A recruiter needed to manually collect availability from the candidate, identify qualified interviewers, perform “Calendar Tetris” to find who is available to interview the candidate, schedule on the earliest date possible, and make any last-minute adjustments as availability changed. They must do this while considering the interview load on each individual and whether interviewers need to be trained and shadowing others. 🥵 TA software didn’t help. As hiring managers, we know TA is a critical function, and as engineers, we know software can do better. So, we built and continue to build Ashby to give TA teams the highest standard of tooling. Software that’s intelligent and powerful. Software that provides insights into where they’re failing and automates or simplifies many of the tasks they’re underwater with. We want other functions and departments to be jealous of what TA teams can do with Ashby, and today they often are! Why You Should or Shouldn’t Apply Software engineers come in many flavors, not all of which fit our model. Here are some things to help you decide if this fits you and what you’re looking for: You’re not afraid to tackle any part of a technology stack. You do what’s necessary to successfully deliver a feature, whether writing frontend or choosing new infrastructure. We’ll provide a supportive environment to do it successfully (e.g., design system, SRE team). You’ve tackled projects with a lot of product and technical ambiguity, and you thrive at the intersection of the two. We’re not building a simple CRUD app, and many of the challenges we tackle require you to use your knowledge of our customers to build powerful abstractions and flexibility in the system to solve a class of problems. You know how to strike the right balance between speed and quality. Ashby wasn’t built quickly. We took four years to launch publicly because convincing customers to switch required a high-quality product. However, time isn’t infinite, especially for a startup, so we still move with urgency—we’ve built the equivalent of three or more VC-backed startups with a very small team. You are ambitious and always looking to improve your skills. For most engineers, this role will give you more freedom and responsibilities than you’ve experienced in the past. To thrive (and level up), you’ll need to be open to feedback (and we give lots of it). You’re an excellent collaborator and communicator. Ownership and freedom don’t mean you work in a vacuum. You’ll need to vet your decisions with the appropriate stakeholders, keep them up to date when necessary, and work with other engineers to get your projects across the finish line. Clear and concise communication helps a lot here! You seek to create leverage in your work. The nature of software is that you can often automate or abstract what would be tedious, time-consuming work. Your impatience usually leads to new abstractions, tools to allow Support to debug before Engineering, new lint rules to prevent common bugs, etc. Put another way, you shouldn’t apply if: To you, a tech lead, staff, or principal engineer is someone who spends most of their time project managing or doing architecture reviews. Our most tenured engineers spend most of their time building, and we often trust them with our most challenging problems. While they lead product and technical areas and help other engineers plan their most challenging work, it’s not a requirement, nor do engineers need their sign-off. You need company-driven process and structure to get your projects across the finish line. Sprint planning and well-defined project management processes are things you need or look to others to lead. You’d rather focus on the technical details and challenges. You only want to do exciting work. We’re building a team of kind, collaborative folks. Customer issues and investigations are distributed across the team, including our high-level ICs. You can get lost in the details. Once you start implementation, it can be hard to take a step back and think about the project as a whole. You like everything to be planned upfront. You haven’t led or taken ownership of projects before. You’re used to working with tech leads and taking on tasks distributed by them. You want to mentor earlier-career engineers. We rely on engineers owning their projects, so we need engineers with that experience. This requires the team to be reasonably tenured. More than 90% of the team would be considered Senior or above in the industry today, so mentorship opportunities are very limited. Engineering Culture Our engineering culture is motivated by Benji’s (my Co-founder and CEO) and my belief that a small, talented team, given the right environment, can build high-quality software fast (and work regular hours!). We do it through: Minimal process with ownership over decisions normally made by product and design Natural collaboration and deliberate communication Investing in tools and abstractions that give us leverage Putting effort into building a diverse team Minimal Process & Lots of Ownership The best engineers we’ve worked with delivered reliably magical outcomes. They took customer problems and relentlessly drove them to solutions that were not only successful but often brilliant and creative. While they did this with minimal oversight, stakeholders were never in the dark as to what was going on, and no setback was a surprise. Traditional product-development processes aren’t meant for the best engineers. Their purpose is to create consistent outcomes regardless of the engineer’s skill. But, consistency comes at the expense of an engineer’s time and freedom—both ingredients necessary to generate those magical outcomes. As a result, process stifles the best engineers and doesn’t give others the opportunity to practice the behaviors that made the best engineers the “best.” At Ashby, we want to build an environment that encourages every engineer to be their best. So, at Ashby, every Engineer runs their project. Product Managers (and Designers) build strategy, do customer research, and hand off problem briefs to Engineers. Engineers take on the rest: they research the problem, write product specs, build wireframes, and implement their solution end-to-end. We rely on engineers, not process, to push information outward to the relevant folks (e.g., Product Managers) and pull folks in to help (e.g., Designers, Infra). It’s a new level of ownership for many engineers, but we’d rather an engineer fail a bit and coach up their skills than use process as a crutch. Not everyone succeeds in our culture, but those who do thrive. Collaboration is Natural & Communication is Deliberate Our engineering team consists of lifelong learners who are talented but also humble and kind (meet them here!). These attributes create an environment where collaboration happens naturally. We combine this with research, prototyping, and written proposals to see around corners and get feedback from the team across time zones. Focus time is something that we hold sacred, and, with thoughtful and deliberate communication, engineers are in <2h meetings per week (I wrote about it here). To drive it home, here's a recent calendar of an engineer who has been with us for over 4 years: We also meet in person at least twice a year, once as a department and once as a company. You also have a small budget to meet up with folks in your city/region. Increase Leverage, not Team Size We built Ashby with the quality, breadth, and depth that many customers would expect from much larger teams over larger time scales. We’ve done this through investment in: Great developer tooling. Our CI/CD takes ~10m, and we deploy at least 15x a day. A debugger that works out of the box. Everyone on the team has contributed to our developer experience 💪🏾. Building blocks to create powerful and customizable products fast. At the core of Ashby is a set of common components (analytics modeling and query language, policy engine, workflow engine, design system) that we constantly improve. Each improvement to a common component cascades throughout our app (short video below). Here’s an impromptu quote from Arjun in our company Slack of what it’s like to build a feature at Ashby: And a demo of one of these building blocks: Put Effort into Diversity Diverse teams drive innovation and better outcomes. Having seen my mother and partner build their careers as minority women in non-diverse fields, I want to make sure Ashby creates opportunities for the next generation of engineers from underrepresented groups. Today, 21% of engineers at Ashby are from underrepresented groups. It’s not great, and we are taking conscious steps to improve, like sourcing diverse candidates, providing generous paid family leave, no leetcode interviews, and more. Interview Process At Ashby, our team and interview process want to help you show your best self. We’ll dive into past projects and simulate working together via pair programming, writing product and tech specs collaboratively, and talking through decisions. There are no leetcode or whiteboard exercises. Our interview process is three rounds: Introduction call with Hiring Manager (15 to 30m, live) A technical screen where we pair in our actual codebase (1h, live) Three non-coding interviews that focus on product thinking, technical design, and infrastructure (3h 15m, live can be split across multiple days) Depending on our leadership team’s bandwidth, we may start with an additional 30m screen with a recruiter. Your hiring manager will be your main point of contact and prep you for interviews. Each round will have written guidance so you know what to expect (you’ll need minimal preparation). You’ll meet 4 to 6 people in engineering (with 5-15 minutes in each interview to ask them questions). If we don’t give an offer, we’ll provide feedback! Your First Three Months at Ashby We want an exceptional onboarding experience for every new hire. At Ashby, your dev environment is set up with a single script, you push your first product change on day one, and you spend the rest of your time shipping product changes that give you a tour of our codebase and best practices.

Job DescriptionSalary: BellAir is seeking Flight Operations Coordinators for our new Night Shift (Part 135 Charter Operations Schedule: Night shift, 10:30 PM 7:00 AM EDT. Work 4 consecutive nights, followed by 3 days off. One weekend night required. About the Role We are seeking a detail-oriented Flight Operations Coordinator to support our Part 135 charter operation during overnight hours. In this role, you will play a critical part in ensuring safe, compliant, and efficient flight operations while the fleet is active and supported around the clock. Youll work four nights on and three nights off, providing a predictable schedule. Responsibilities • Perform all operational duties during overnight hours (10:30 PM 7:00 AM EDT) in support of Part 135 charter flights., • Monitor flight activity, crew scheduling, trip planning, and dispatch functions., • Communicate effectively with flight crews, maintenance, and the day-shift operations team to ensure seamless handoffs., • Ensure compliance with FAA Part 135 regulations, company policies, and safety protocols. Qualifications • Minimum of 2 years of professional experience in aviation (operations, dispatch, crew support, or related role)., • Prior experience in aviation preferred., • Strong knowledge of FAA regulations and Part 135 requirements a plus., • Attention to detail and ability to work independently during night hours., • Reliability and punctuality in maintaining a 4-on/3-off night shift schedule., • Strong communication and organizational skills. Why Join Us? • Be part of a dynamic Part 135 charter operation supporting diverse missions and clients., • Consistent schedule: 4 nights on, 3 nights off each week., • Opportunity to make an impact during critical overnight operations., • Supportive team environment with strong communication across shifts., • Competitive pay and benefits package., • BellAir is proud to be an equal opportunity employer. We are committed to creating an inclusive workplace for all employees. remote work

Excellent work-life balance with 4 days off per week. Practice hours: Monday - Friday, 7:30 am - 7 pm. Manageable patient volume of 20 - 25 patients per day.

Client needs and work volume may often require more than 40 hours per week to complete essential duties of this job. This position requires special hours including working weekends and evenings. This includes performing or preparing procedures that do not require veterinarian or veterinary technicia

Weekend rotation only once every 2 - 3 months.